; -------------------------------------------------------------------------------- ; @Title: IMX95 Specific Menu ; @Props: Released ; @Author: NEJ, KRZ ; @Changelog: 2023-10-10 NEJ ; 2023-10-18 KRZ ; @Manufacturer: NXP - NXP Semiconductors ; @Doc: Generated (TRACE32, build: 163898.), based on: ; MIMX9594_cm33.svd (Ver. 1.0), MIMX9594_cm7.svd (Ver. 1.0), ; MIMX9596_cm33.svd (Ver. 1.0), MIMX9596_cm7.svd (Ver. 1.0) ; @Core: Cortex-A55, Cortex-M33F, Cortex-M7F ; @Chip: IMX95, IMX95-CM33, IMX95-CM7 ; @Copyright: (C) 1989-2023 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: perimx95.per 18744 2024-12-11 10:53:27Z jhuang $ sif (CORENAME()=="CORTEXA55") tree "Core Registers (Cortex-A55)" AUTOINDENT.PUSH AUTOINDENT.ON center tree tree.open "AArch64" tree "ID Registers" rgroup.quad spr:0x30000++0x00 line.quad 0x00 "MIDR_EL1,Main ID Register" hexmask.quad.byte 0x0 24.--31. 1. "IMPLEMENTER,Implementer code" bitfld.quad 0x00 20.--23. "VARIANT,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "ARCHITECTURE,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,CPUID scheme" newline hexmask.quad.word 0x00 4.--15. 1. "PARTNUM,Primary Part Number" bitfld.quad 0x00 0.--3. "REVISION,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x30040++0x00 line.quad 0x00 "ID_AA64PFR0_EL1,Processor Feature Register 0" bitfld.quad 0x00 60.--63. "CSV3,Speculative use of faulting data" "Cannot be used,?..." bitfld.quad 0x00 56.--59. "CSV2,Speculative use of out of context branch targets" "Cannot effect,?..." newline bitfld.quad 0x00 28.--31. "RAS,RAS extension version" "Reserved,Version 1,?..." bitfld.quad 0x00 24.--27. "GIC,GIC CPU interface" "Disabled,Enabled,?..." newline bitfld.quad 0x00 20.--23. "ADVSIMD,Advanced SIMD" "Reserved,Implemented,?..." bitfld.quad 0x00 16.--19. "FP,Floating-point" "Reserved,Implemented,?..." newline bitfld.quad 0x00 12.--15. "EL3,EL3 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." bitfld.quad 0x00 8.--11. "EL2,EL2 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." newline bitfld.quad 0x00 4.--7. "EL1,EL1 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." bitfld.quad 0x00 0.--3. "EL0,EL0 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x30040++0x00 line.quad 0x00 "ID_AA64PFR0_EL1,Processor Feature Register 0" bitfld.quad 0x00 60.--63. "CSV3,Speculative use of faulting data" "Reserved,Forbidden,?..." bitfld.quad 0x00 56.--59. "CSV2,Speculative use of faulting data" "Reserved,Forbidden,?..." newline bitfld.quad 0x00 28.--31. "RAS,RAS extension version" "Reserved,Version 1,?..." bitfld.quad 0x00 24.--27. "GIC,GIC CPU interface" "Disabled,Enabled,?..." newline bitfld.quad 0x00 20.--23. "ADVSIMD,Advanced SIMD" "Reserved,Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented" bitfld.quad 0x00 16.--19. "FP,Floating-point" "Reserved,Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented" newline bitfld.quad 0x00 12.--15. "EL3,EL3 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." bitfld.quad 0x00 8.--11. "EL2,EL2 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." newline bitfld.quad 0x00 4.--7. "EL1,EL1 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." bitfld.quad 0x00 0.--3. "EL0,EL0 exception level handling" "Reserved,Reserved,AArch64/AArch32,?..." rgroup.quad spr:0x30041++0x00 line.quad 0x00 "ID_AA64PFR1_EL1,Processor Feature Register 1" bitfld.quad 0x00 4.--7. "SSBS,Speculative store bypassing safe mechanism implemented" "Reserved,Implemented,?..." endif rgroup.quad spr:0x30050++0x00 line.quad 0x00 "ID_AA64DFR0_EL1,AArch64 Debug Feature Register" bitfld.quad 0x00 28.--31. "CTX_CMPS,Number of breakpoints that are context-aware" "Reserved,2,?..." bitfld.quad 0x00 20.--23. "WRPS,Number of watchpoints" "Reserved,Reserved,Reserved,4,?..." bitfld.quad 0x00 12.--15. "BRPS,Number of breakpoints" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..." newline bitfld.quad 0x00 8.--11. "PMUVER,Performance monitor extension version" "Reserved,Reserved,Reserved,Reserved,Version 3/16 bit evtCount,?..." bitfld.quad 0x00 4.--7. "TRACEVER,Trace extension version" "Not implemented,?..." bitfld.quad 0x00 0.--3. "DEBUGVER,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,v8-A,?..." rgroup.quad spr:0x30060++0x00 line.quad 0x00 "ID_AA64ISAR0_EL1,Instruction Set Attribute Register 0" bitfld.quad 0x00 44.--47. "DP,Implemented UDOT and SDOT instructions" "Reserved,Implemented,?..." newline bitfld.quad 0x00 28.--31. "RDM,Rounding Double Multiply Add/Subtract instructions Support" "Reserved,Implemented,?..." bitfld.quad 0x00 20.--23. "ATOMIC,Atomic instructions in AArch64" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 16.--19. "CRC32,Indicates whether CRC32 instructions are implemented" "Reserved,Implemented,?..." newline bitfld.quad 0x00 12.--15. "SHA2,SHA2 instructions in AArch64" "Not implemented,Implemented,?..." bitfld.quad 0x00 8.--11. "SHA1,SHA1 instructions in AArch64" "Not implemented,Implemented,?..." bitfld.quad 0x00 4.--7. "AES,AES instruction in AArch64" "Not implemented,Reserved,AESE/AESD/AESMC/AESIMC/PMULL/PMULL2,?..." if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x30070++0x00 line.quad 0x00 "ID_AA64MMFR0_EL1,Memory Model Feature Register 0" bitfld.quad 0x00 28.--31. "TGRAN4,4KB granule supported" "Supported,?..." bitfld.quad 0x00 24.--27. "TGRAN64,64KB granule supported" "Supported,?..." bitfld.quad 0x00 20.--23. "TGRAN16,16KB granule supported" "Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "BIGENDEL0,Mixed-endian support at EL0" "Not supported,?..." bitfld.quad 0x00 12.--15. "SNSMEM,Secure versus Non-secure Memory distinction" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "BIGEND,Mixed-endian configuration support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "ASIDBITS,Number of ASID bits" "Reserved,Reserved,16 bits,?..." bitfld.quad 0x00 0.--3. "PARANGE,Physical address range supported" "Reserved,Reserved,Reserved,Reserved,44 bits/16 TB,?..." elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x30070++0x00 line.quad 0x00 "ID_AA64MMFR0_EL1,Memory Model Feature Register 0" bitfld.quad 0x00 20.--23. "TGRAN16,16KB granule supported" "Reserved,Supported,?..." bitfld.quad 0x00 16.--19. "BIGENDEL0,Mixed-endian support at EL0" "Not supported,?..." bitfld.quad 0x00 12.--15. "SNSMEM,Secure versus Non-secure Memory distinction" "Reserved,Supported,?..." newline bitfld.quad 0x00 8.--11. "BIGEND,Mixed-endian configuration support" "Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "ASIDBITS,Number of ASID bits" "Reserved,Reserved,16 bits,?..." bitfld.quad 0x00 0.--3. "PARANGE,Physical address range supported" "Reserved,Reserved,40 bits/1 TB,?..." endif rgroup.quad spr:0x30041++0x00 line.quad 0x00 "ID_AA64PFR1_EL1,Processor Feature Register 1" bitfld.quad 0x00 4.--7. "SSBS,Speculative Store Bypassing Safe (SSBS) mechanism support" "Reserved,Supported,?..." rgroup.quad spr:0x30051++0x00 line.quad 0x00 "ID_AA64DFR1_EL1,Debug Feature Register 1" rgroup.quad spr:0x30061++0x00 line.quad 0x00 "ID_AA64ISAR1_EL1,Instruction Set Attribute Register 1" bitfld.quad 0x00 20.--23. "LRCPC,Indicates whether load-acquire (LDA) instructions are implemented for an Release Consistent processor consistent RCPC model" "Reserved,Implemented,?..." bitfld.quad 0x00 0.--3. "DC_CVAP,DC CVAP support in AArch64" "Reserved,Implemented,?..." rgroup.quad spr:0x30071++0x00 line.quad 0x00 "ID_AA64MMFR1_EL1,Memory Model Feature Register 1" bitfld.quad 0x00 28.--31. "XNX,EL0/EL1 execute control distinction at stage2 bit support" "Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "PAN,Privileged Access Never Support" "Reserved,Reserved,Extended,?..." bitfld.quad 0x00 16.--19. "LO,Limited Order Regions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 12.--15. "HPDS,Hierarchical Permission Disabled Support" "Reserved,Reserved,Extended,?..." bitfld.quad 0x00 8.--11. "VH,Virtualization Host Extensions Support" "Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "VMIDBITS,Number of VMID bits" "Reserved,Reserved,16 bits,?..." newline bitfld.quad 0x00 0.--3. "HAFDBS,Hardware updates of the Access and Dirty" "Reserved,Reserved,Access/Dirty supported,?..." if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x30072++0x00 line.quad 0x00 "ID_AA64MMFR2_EL1,Memory Model Feature Register 2" bitfld.quad 0x00 12.--15. "IESB, Indicates whether an implicit Error Synchronization Barrier has been inserted" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "LSM,Indicates whether LDM and STM are supported" "Not supported,?..." bitfld.quad 0x00 4.--7. "UAO,User Access Override support" "Reserved,Supported,?..." newline bitfld.quad 0x00 0.--3. "CNP,Common not Private support" "Reserved,Supported,?..." elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x30072++0x00 line.quad 0x00 "ID_AA64MMFR2_EL1,Memory Model Feature Register 2" bitfld.quad 0x00 16.--19. "VARANGE,Indicates support for a larger virtual address" "Not supported,?..." bitfld.quad 0x00 12.--15. "IESB, Indicates whether an implicit Error Synchronization Barrier has been inserted" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "LSM,Indicates whether LDM and STM are supported" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "UAO,User Access Override support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "CNP,Common not Private support" "Reserved,Supported,?..." endif rgroup.quad spr:0x30054++0x00 line.quad 0x00 "ID_AA64AFR0_EL1,Auxiliary Feature Register 0" rgroup.quad spr:0x30055++0x00 line.quad 0x00 "ID_AA64AFR1_EL1,Auxiliary Feature Register 1" rgroup.quad spr:0x30010++0x00 line.quad 0x00 "ID_PFR0_EL1,AArch32 Processor Feature Register 0" bitfld.quad 0x00 28.--31. "RAS,RAS extension version" "Reserved,Version 1,?..." bitfld.quad 0x00 16.--19. "CSV2,Speculative use of faulting data" "Not disclosed,?..." newline bitfld.quad 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..." bitfld.quad 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Trivial,?..." bitfld.quad 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,After Thumb-2,?..." newline bitfld.quad 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..." if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x30011++0x00 line.quad 0x00 "ID_PFR1_EL1,AArch32 Processor Feature Register 1" bitfld.quad 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..." bitfld.quad 0x00 24.--27. "VF,Virtualization fractional Support - Supported features from the ARMv7 Virtualization Extensions" "Not supported,?..." bitfld.quad 0x00 20.--23. "SF,Security fractional Support - Supported features from the ARMv7 Security Extensions" "Not supported,?..." newline bitfld.quad 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "V,Virtualization Extensions Support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "S,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x30011++0x00 line.quad 0x00 "ID_PFR1_EL1,AArch32 Processor Feature Register 1" bitfld.quad 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..." newline bitfld.quad 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "V,Virtualization Extensions Support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "S,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." endif if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x30034++0x00 line.quad 0x00 "ID_PFR2_EL1,AArch32 Processor Feature Register 2" bitfld.quad 0x00 0.--3. "CSV3,Speculative use of faulting data" "Reserved,Forbidden,?..." elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x30034++0x00 line.quad 0x00 "ID_PFR2_EL1,AArch32 Processor Feature Register 2" bitfld.quad 0x00 4.--7. "SSBS,Speculative Store Bypassing Safe (SSBS) mechanism support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "CSV3,Speculative use of faulting data" "Reserved,Cannot be used,?..." endif rgroup.quad spr:0x30013++0x00 line.quad 0x00 "ID_AFR0_EL1,AArch32 Auxiliary Feature Register 0" rgroup.quad spr:0x30014++0x00 line.quad 0x00 "ID_MMFR0_EL1,Memory Model Feature Register 0" bitfld.quad 0x00 28.--31. "INNERSHR,Indicates innermost shareability domain implemented" "Reserved,HW coherency,?..." bitfld.quad 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..." bitfld.quad 0x00 20.--23. "AUXREG,Auxiliary Register Support" "Reserved,Reserved,Control/Fault Status,?..." newline bitfld.quad 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..." bitfld.quad 0x00 12.--15. "SHARELVL,Shareability levels" "Reserved,Implemented 2 levels,?..." bitfld.quad 0x00 8.--11. "OUTERSHR,Outer Shareable Support" "Reserved,HW coherency,?..." newline bitfld.quad 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..." bitfld.quad 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,VMSAv7/PXN/L-DESC,?..." rgroup.quad spr:0x30015++0x00 line.quad 0x00 "ID_MMFR1_EL1,Memory Model Feature Register 1" bitfld.quad 0x00 28.--31. "BPRED,Branch Predictor" "Reserved,Reserved,Reserved,Reserved,No flushing,?..." bitfld.quad 0x00 24.--27. "L1TSTCLN,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." bitfld.quad 0x00 20.--23. "L1UNI,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." newline bitfld.quad 0x00 16.--19. "L1HVD,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.quad 0x00 12.--15. "L1UNISW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.quad 0x00 8.--11. "L1HVDSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "L1UNIVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.quad 0x00 0.--3. "L1HVDVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup.quad spr:0x30016++0x00 line.quad 0x00 "ID_MMFR2_EL1,Memory Model Feature Register 2" bitfld.quad 0x00 28.--31. "HWACCFLG,Hardware Access Flag Support" "Not supported,?..." bitfld.quad 0x00 24.--27. "WFISTALL,Wait for Interrupt Stalling Support" "Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "MEMBARR,Memory Barrier Operations Support" "Reserved,Reserved,DSB/ISB/DMB,?..." newline bitfld.quad 0x00 16.--19. "UNITLB,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,S2 operations,?..." bitfld.quad 0x00 12.--15. "HVDTLB,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.quad 0x00 8.--11. "LL1HVDRNG,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "L1HVDBG,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." bitfld.quad 0x00 0.--3. "L1HVDFG,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." rgroup.quad spr:0x30017++0x00 line.quad 0x00 "ID_MMFR3_EL1,AArch32 Memory Model Feature Register 3" bitfld.quad 0x00 28.--31. "SUPERSEC,Supersection support" "Supported,?..." bitfld.quad 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..." bitfld.quad 0x00 20.--23. "COHWALK,Indicates whether translation table updates require a clean to the point of unification" "Reserved,Not required,?..." newline bitfld.quad 0x00 16.--19. "PAN,Privileged Access Never Support" "Reserved,Reserved,Extended,?..." bitfld.quad 0x00 12.--15. "MAINTBCST,Maintenance broadcast Support" "Reserved,Reserved,Shareability/Defined behavior,?..." bitfld.quad 0x00 8.--11. "BPMAINT,Invalidate Branch predictor Support" "Reserved,Reserved,Invalidate All/VA,?..." newline bitfld.quad 0x00 4.--7. "CMAINTSW,Cache maintenance by set/way" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "CMAINTVA,Cache maintenance by MVA" "Reserved,Supported,?..." rgroup.quad spr:0x30026++0x00 line.quad 0x00 "ID_MMFR4_EL1,AArch32 Memory Model Feature Register 4" bitfld.quad 0x00 20.--23. "LSM,LSMAOE and NTLSMD bits support" "Not supported,?..." bitfld.quad 0x00 16.--19. "HD,Hierarchical Permission Disabled Support" "Reserved,Reserved,Extended,?..." bitfld.quad 0x00 12.--15. "CNP,Common not Private support" "Reserved,Supported,?..." newline bitfld.quad 0x00 8.--11. "XNX,EL0/EL1 execute control distinction at stage2 bit support" "Not supported,Supported,?..." bitfld.quad 0x00 4.--7. "AC2,Indicates the extension of the HACTLR register using HACTLR2" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "SPECSEI,Describes whether the PE can generate SError interrupt exceptions" "Not possible,?..." rgroup.quad spr:0x30020++0x00 line.quad 0x00 "ID_ISAR0_EL1,AArch32 Instruction Set Attribute Register 0" bitfld.quad 0x00 24.--27. "DIVIDE,Divide Instructions Support" "Reserved,Reserved,T32/A32,?..." bitfld.quad 0x00 20.--23. "DEBUG,Debug Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 16.--19. "COPROC,Coprocessor Instructions Support" "Not supported,?..." newline bitfld.quad 0x00 12.--15. "CMPBRANCH,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "BITFIELD,Bitfield Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "BITCOUNT,Bit Counting Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 0.--3. "SWAP,Swap Instructions Support" "Not supported,?..." rgroup.quad spr:0x30021++0x00 line.quad 0x00 "ID_ISAR1_EL1,AArch32 Instruction Set Attribute Register 1" bitfld.quad 0x00 28.--31. "JAZELLE,Jazelle instructions support" "Reserved,Supported,?..." bitfld.quad 0x00 24.--27. "INTERWORK,Interwork instructions support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "IMMEDIATE,Immediate instructions support" "Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "IFTHEN,If then instructions support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "EXTEND,Extend instructions support" "Reserved,Reserved,Full support,?..." bitfld.quad 0x00 8.--11. "EXCEPT_AR,Exception A and R Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "EXCEPT,Exception in ARM Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "ENDIAN,Endian Instructions Support" "Reserved,Supported,?..." rgroup.quad spr:0x30022++0x00 line.quad 0x00 "ID_ISAR2_EL1,AArch32 Instruction Set Attribute Register 2" bitfld.quad 0x00 28.--31. "REVERSAL,Reversal instructions support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 24.--27. "PSR_AR,PSR Instructions support" "Not supported,Supported,?..." bitfld.quad 0x00 20.--23. "MULTU,Advanced unsigned multiply instructions support" "Reserved,Reserved,UMAAL,?..." newline bitfld.quad 0x00 16.--19. "MULTS,Advanced signed multiply instructions support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "MULT,Multiply instructions support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "MULTIACCESSINT,Multi-access interruptible instructions support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "MEMHINT,Memory hint instructions support" "Reserved,Reserved,Reserved,Reserved,PLD/PLI/PLDW,?..." bitfld.quad 0x00 0.--3. "LOADSTORE,Load and store instructions support" "Reserved,Reserved,Supported,?..." rgroup.quad spr:0x30023++0x00 line.quad 0x00 "ID_ISAR3_EL1, AArch32 Instruction Set Attribute Register 3" bitfld.quad 0x00 28.--31. "T32EE,Thumb-EE Extensions Support" "Not supported,?..." bitfld.quad 0x00 24.--27. "TRUENOP,True NOP Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "T32COPY,Thumb Copy Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "TABBRANCH,Table Branch Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "SYNCHPRIM,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "SVC,SVC Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "SIMD,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "SATURATE,Saturate Instructions Support" "Reserved,Supported,?..." rgroup.quad spr:0x30024++0x00 line.quad 0x00 "ID_ISAR4_EL1, AArch32 Instruction Set Attribute Register 4" bitfld.quad 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..." bitfld.quad 0x00 24.--27. "PSR_M,PSR_M Instructions Support" "Not supported,?..." bitfld.quad 0x00 20.--23. "SYNCHPRIM_FRAC,Synchronization Primitive instructions" "Supported,?..." newline bitfld.quad 0x00 16.--19. "BARRIER,Barrier Instructions support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "SMC,SMC Instructions support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "WRITEBACK,Write-Back Instructions support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "WITHSHIFTS,With-Shift Instructions support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "UNPRIV,Unprivileged Instructions support" "Reserved,Reserved,Supported,?..." rgroup.quad spr:0x30025++0x00 line.quad 0x00 "ID_ISAR5_EL1,AArch32 Instruction Set Attribute Register 5" bitfld.quad 0x00 24.--27. "RDM,Rounding Double Multiply Add/Subtract instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..." newline bitfld.quad 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..." bitfld.quad 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "SEVL, SEVL Instructions Support" "Reserved,Supported,?..." rgroup.quad spr:0x30027++0x00 line.quad 0x00 "ID_ISAR6_EL1,AArch32 Instruction Set Attribute Register 6" bitfld.quad 0x00 4.--7. "DP,UDOT and SDOT instructions support" "Reserved,Supported,?..." rgroup.quad spr:0x30005++0x00 line.quad 0x00 "MPIDR_EL1,MPIDR_EL1" hexmask.quad.byte 0x00 32.--39. 1. "AFF3,Affinity level 3. Highest level affinity field" bitfld.quad 0x00 30. "U,Uniprocessor" "Multiprocessor,?..." bitfld.quad 0x00 24. "MT,Indicates whether the lowest level of affinity consists of logical processors that are implemented using a multi-threading type approach" "Reserved,Very inter" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field" bitfld.quad 0x00 8.--10. "AFF1,Third highest level affinity field/Identification number for each CPU in cluster" "CPUID0,CPUID1,CPUID2,CPUID3,CPUID4,CPUID5,CPUID6,CPUID7" hexmask.quad.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. The level identifies individual threads within a multi-threaded core" rgroup.quad spr:0x30006++0x00 line.quad 0x00 "REVIDR_EL1,Revision ID register" rgroup.quad spr:0x33007++0x00 line.quad 0x00 "DCZID_EL0,DCZID_EL0" bitfld.quad 0x00 4. "DZP,Data Zero prohibited" "Permitted,Prohibited" bitfld.quad 0x00 0.--3. "BS,Log2 of the block size in words" "Reserved,Reserved,Reserved,Reserved,16 words,?..." rgroup.quad spr:0x30030++0x00 line.quad 0x00 "MVFR0_EL1,AArch32 Media And VFP Feature Register 0" bitfld.quad 0x00 28.--31. "FPROUND,Indicates whether the floating point implementation provides support for rounding modes" "Reserved,Implemented,?..." bitfld.quad 0x00 24.--27. "FPSHVEC,Indicates whether the floating-point implementation provides support for the use of short vectors" "Not implemented,?..." bitfld.quad 0x00 20.--23. "FPSQRT,Indicates whether the floating-point implementation provides support for the ARMv6 VFP square root operations" "Reserved,Implemented,?..." newline bitfld.quad 0x00 16.--19. "FPDIVIDE,Indicates whether the floating-point implementation provides support for VFP divide operations" "Reserved,Implemented,?..." bitfld.quad 0x00 12.--15. "FPTRAP,Indicates whether the floating-point implementation provides support for exception trapping" "Not implemented,?..." bitfld.quad 0x00 8.--11. "FPDP,Indicates whether the floating-point implementation provides support for double-precision operations" "Reserved,Reserved,Implemented,?..." newline bitfld.quad 0x00 4.--7. "FPSP,Indicates whether the floating-point implementation provides support for single-precision operations" "Reserved,Reserved,Implemented (VFPv3/VFPv4),?..." bitfld.quad 0x00 0.--3. "SIMDREG,Indicates whether the Advanced SIMD and floating-point implementation provides support for the Advanced SIMD and floating-point register bank" "Reserved,Reserved,32x64-bit registers,?..." rgroup.quad spr:0x30031++0x00 line.quad 0x00 "MVFR1_EL1,AArch32 Media And VFP Feature Register 1" bitfld.quad 0x00 28.--31. "SIMDFMAC,Indicates whether the Advanced SIMD implementation provides fused multiply accumulate instructions" "Reserved,Implemented,?..." bitfld.quad 0x00 24.--27. "FPHP,Indicates the level of half-precision floating-point support" "Reserved,Reserved,Reserved,Conversions/Arithmetic,?..." bitfld.quad 0x00 20.--23. "SIMDHP,Indicates the level of half-precision floating-point support" "Reserved,Reserved,Conversions/Arithmetic,?..." newline bitfld.quad 0x00 16.--19. "SIMDSP,Indicates whether the floating-point and Advanced SIMD implementation provides single-precision floating-point instructions" "Reserved,Implemented,?..." bitfld.quad 0x00 12.--15. "SIMDINT,Indicates whether the floating-point and Advanced SIMD implementation provides integer instructions" "Reserved,Implemented,?..." bitfld.quad 0x00 8.--11. "SIMDLS,Indicates whether the floating-point and Advanced SIMD implementation provides load/store instructions" "Reserved,Implemented,?..." newline bitfld.quad 0x00 4.--7. "FPDNAN,Indicates whether the floating-point implementation provides support only for the Default NaN mode" "Reserved,Propagation of NaN values,?..." bitfld.quad 0x00 0.--3. "FPFTZ,Indicates whether the floating-point implementation provides support only for the Flush-to-Zero mode of operation" "Reserved,Implemented,?..." rgroup.quad spr:0x30032++0x00 line.quad 0x00 "MVFR2_EL1,AArch32 Media And VFP Feature Register 2" bitfld.quad 0x00 4.--7. "FPMISC,Indicates whether the floating-point implementation provides support for miscellaneous VFP features" "Reserved,Reserved,Reserved,Reserved,Fully supported,?..." bitfld.quad 0x00 0.--3. "SIMDMISC,Indicates whether the Advanced SIMD implementation provides support for miscellaneous Advanced SIMD features" "Reserved,Reserved,Reserved,Fully supported,?..." rgroup.quad spr:0x31007++0x00 line.quad 0x00 "AIDR_EL1,Auxiliary ID Register EL1" group.quad spr:0x34000++0x00 line.quad 0x00 "VPIDR_EL2,Virtualization Processor ID register" hexmask.quad.byte 0x0 24.--31. 1. "IMPLEMENTER,Implementer code" bitfld.quad 0x00 20.--23. "VARIANT,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "ARCHITECTURE,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,CPUID scheme" newline hexmask.quad.word 0x00 4.--15. 1. "PARTNUM,Primary Part Number" bitfld.quad 0x00 0.--3. "REVISION,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.quad spr:0x34005++0x00 line.quad 0x00 "VMPIDR_EL2,Virtualization Multiprocessor ID registers" hexmask.quad.byte 0x00 32.--39. 1. "AFF3,Affinity level 3. Highest level affinity field" bitfld.quad 0x00 30. "U,Uniprocessor" "Multiprocessor,?..." bitfld.quad 0x00 24. "MT,Indicates whether the lowest level of affinity consists of logical processors that are implemented using a multi-threading type approach" "Reserved,Very interdependent" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field" bitfld.quad 0x00 8.--11. "AFF1,Third highest level affinity field/Identification number for each CPU in cluster" "CPUID0,CPUID1,CPUID2,CPUID3,CPUID4,CPUID5,CPUID6,CPUID7,?..." hexmask.quad.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. The level identifies individual threads within a multi-threaded core" tree.end tree "System Control and Configuration" group.quad spr:0x36111++0x00 line.quad 0x00 "SDER32_EL3,Secure Debug Enable Register" bitfld.quad 0x00 1. "SUNIDEN,Enable non-invasive debug features in Secure User mode" "Disabled,Enabled" bitfld.quad 0x00 0. "SUIDEN,Enable debug exceptions in Secure User mode" "Disabled,Enabled" if (CORENAME()=="CORTEXA75") group.quad spr:0x30100++0x00 line.quad 0x00 "SCTLR_EL1,System Control Register EL1" bitfld.quad 0x00 26. "UCI,EL0 access in AArch64 for DC CVAU/ DC CIVAC/ DC CVAC and IC IVAU instructions enable" "Disabled,Enabled" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.quad 0x00 24. "E0E,Endianness of explicit data accesses at EL0" "Little,Big" bitfld.quad 0x00 23. "SPAN,Set PSTATE.PAN bit on taking an exception to the EL1 exception level" "Reserved,Unchanged" newline bitfld.quad 0x00 21. "IESB,Implicit Error Synchronization Barrier enable" "Disabled,Enabled" bitfld.quad 0x00 19. "WXN,Write permission implies XN (Execute Never)" "Not forced,Forced" newline bitfld.quad 0x00 18. "NTWE,WFE instruction executed at EL0" "Executed,Not executed" bitfld.quad 0x00 16. "NTWI,WFI instruction executed at EL0" "Executed,Not executed" newline bitfld.quad 0x00 15. "UCT,EL0 access in AArch64 to the CTR_EL0 enable" "Disabled,Enabled" bitfld.quad 0x00 14. "DZE,Access to DC ZVA instruction at EL0" "Prohibited,Allowed" newline bitfld.quad 0x00 12. "I,Instruction Cache enable" "Disabled,Enabled" bitfld.quad 0x00 9. "UMA,User Mask Access. Controls access to interrupt masks from EL0, when EL0 is using AArch64" "Disabled,Enabled" newline bitfld.quad 0x00 8. "SED,SETEND instruction disable" "No,Yes" bitfld.quad 0x00 7. "ITD,IT Disable" "No," newline bitfld.quad 0x00 5. "CP15BEN,CP15 Barrier Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "SA0,Stack Alignment Check Enable for EL0" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,Stack Alignment Check Enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Data/Unified Cache enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "A,Alignment Check" "Low,High" bitfld.quad 0x00 0. "M,MMU Enable" "Disabled,Enabled" elif (CORENAME()=="CORTEXA55") group.quad spr:0x30100++0x00 line.quad 0x00 "SCTLR_EL1,System Control Register EL1" bitfld.quad 0x00 26. "UCI,EL0 access in AArch64 for DC CVAU/ DC CIVAC/ DC CVAC and IC IVAU instructions enable" "Disabled,Enabled" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.quad 0x00 24. "E0E,Endianness of explicit data accesses at EL0" "Little,Big" bitfld.quad 0x00 23. "SPAN,Set PSTATE.PAN bit on taking an exception to the EL1 exception level" "Reserved,Unchanged" newline bitfld.quad 0x00 19. "WXN,Write permission implies XN (Execute Never)" "Not forced,Forced" bitfld.quad 0x00 18. "NTWE,WFE instruction executed at EL0" "Executed,Not executed" newline bitfld.quad 0x00 16. "NTWI,WFI instruction executed at EL0" "Executed,Not executed" bitfld.quad 0x00 15. "UCT,EL0 access in AArch64 to the CTR_EL0 enable" "Disabled,Enabled" newline bitfld.quad 0x00 14. "DZE,Access to DC ZVA instruction at EL0" "Prohibited,Allowed" bitfld.quad 0x00 12. "I,Instruction Cache enable" "Disabled,Enabled" newline bitfld.quad 0x00 9. "UMA,User Mask Access. Controls access to interrupt masks from EL0, when EL0 is using AArch64" "Disabled,Enabled" bitfld.quad 0x00 8. "SED,SETEND instruction disable" "No,Yes" newline bitfld.quad 0x00 5. "CP15BEN,CP15 Barrier Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "SA0,Stack Alignment Check Enable for EL0" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,Stack Alignment Check Enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Data/Unified Cache enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "A,Alignment Check" "Low,High" bitfld.quad 0x00 0. "M,MMU Enable" "Disabled,Enabled" endif group.quad spr:0x35100++0x00 line.quad 0x00 "SCTLR_EL12,System Control Register EL12" bitfld.quad 0x00 26. "UCI,EL0 access in AArch64 for DC CVAU/ DC CIVAC/ DC CVAC and IC IVAU instructions enable" "Disabled,Enabled" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.quad 0x00 24. "E0E,Endianness of explicit data accesses at EL0" "Little,Big" bitfld.quad 0x00 23. "SPAN,Set PSTATE.PAN bit on taking an exception to the EL1 exception level" "Reserved,Unchanged" newline bitfld.quad 0x00 21. "IESB,Implicit Error Synchronization Barrier enable" "Disabled,Enabled" bitfld.quad 0x00 19. "WXN,Write permission implies XN (Execute Never)" "Not forced,Forced" newline bitfld.quad 0x00 18. "NTWE,WFE instruction executed at EL0" "Executed,Not executed" bitfld.quad 0x00 16. "NTWI,WFI instruction executed at EL0" "Executed,Not executed" newline bitfld.quad 0x00 15. "UCT,EL0 access in AArch64 to the CTR_EL0 enable" "Disabled,Enabled" bitfld.quad 0x00 14. "DZE,Access to DC ZVA instruction at EL0" "Prohibited,Allowed" newline bitfld.quad 0x00 12. "I,Instruction Cache enable" "Disabled,Enabled" bitfld.quad 0x00 9. "UMA,User Mask Access. Controls access to interrupt masks from EL0, when EL0 is using AArch64" "Disabled,Enabled" newline bitfld.quad 0x00 8. "SED,SETEND instruction disable" "No,Yes" bitfld.quad 0x00 7. "ITD,IT Disable" "No," newline bitfld.quad 0x00 5. "CP15BEN,CP15 Barrier Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "SA0,Stack Alignment Check Enable for EL0" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,Stack Alignment Check Enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Data/Unified Cache enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "A,Alignment Check" "Low,High" bitfld.quad 0x00 0. "M,MMU Enable" "Disabled,Enabled" group.quad spr:0x34100++0x00 line.quad 0x00 "SCTLR_EL2,System Control Register EL2" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies XN (Execute Never)" "Not forced,Forced" newline bitfld.quad 0x00 12. "I,Instruction Cache enable" "Disabled,Enabled" bitfld.quad 0x00 3. "SA,Stack Alignment Check Enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "C,Data/Unified Cache enable" "Disabled,Enabled" bitfld.quad 0x00 1. "A,Alignment Check" "Low,High" newline bitfld.quad 0x00 0. "M,MMU Enable" "Disabled,Enabled" group.quad spr:0x36100++0x00 line.quad 0x00 "SCTLR_EL3,System Control Register EL3" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 21. "IESB,Implicit Error Synchronization Barrier enable" "Disabled,Enabled" newline bitfld.quad 0x00 19. "WXN,Write permission implies XN (Execute Never)" "Not forced,Forced" bitfld.quad 0x00 12. "I,Instruction Cache enable" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,Stack Alignment Check Enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Data/Unified Cache enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "A,Alignment Check" "Low,High" bitfld.quad 0x00 0. "M,MMU Enable" "Disabled,Enabled" if (CORENAME()=="CORTEXA55") group.quad spr:0x30F70++0x00 line.quad 0x00 "ATCR_EL1,CPU Auxiliary Control Register" bitfld.quad 0x00 13. "HWVAL160,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB1 if HWEN160 is set" "0,1" bitfld.quad 0x00 12. "HWVAL159,Indicates the value of PBHA[0] on page table walks memory access targeting the base address defined by TTB1 if HWEN159 is set" "0,1" newline bitfld.quad 0x00 9. "HWVAL060,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN060 is set" "0,1" bitfld.quad 0x00 8. "HWVAL059,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN059 is set" "0,1" newline bitfld.quad 0x00 5. "HWEN160,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" bitfld.quad 0x00 4. "HWEN159,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" newline bitfld.quad 0x00 1. "HWEN060,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" bitfld.quad 0x00 0. "HWEN059,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" group.quad spr:0x35F70++0x00 line.quad 0x00 "ATCR_EL12,CPU Auxiliary Control Register" bitfld.quad 0x00 13. "HWVAL160,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB1 if HWEN160 is set" "0,1" bitfld.quad 0x00 12. "HWVAL159,Indicates the value of PBHA[0] on page table walks memory access targeting the base address defined by TTB1 if HWEN159 is set" "0,1" newline bitfld.quad 0x00 9. "HWVAL060,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN060 is set" "0,1" bitfld.quad 0x00 8. "HWVAL059,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN059 is set" "0,1" newline bitfld.quad 0x00 5. "HWEN160,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" bitfld.quad 0x00 4. "HWEN159,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" newline bitfld.quad 0x00 1. "HWEN060,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" bitfld.quad 0x00 0. "HWEN059,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" group.quad spr:0x34F70++0x00 line.quad 0x00 "ATCR_EL2,CPU Auxiliary Control Register" bitfld.quad 0x00 13. "HWVAL160,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB1 if HWEN160 is set" "0,1" bitfld.quad 0x00 12. "HWVAL159,Indicates the value of PBHA[0] on page table walks memory access targeting the base address defined by TTB1 if HWEN159 is set" "0,1" newline bitfld.quad 0x00 9. "HWVAL060,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN060 is set" "0,1" bitfld.quad 0x00 8. "HWVAL059,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN059 is set" "0,1" newline bitfld.quad 0x00 5. "HWEN160,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" bitfld.quad 0x00 4. "HWEN159,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" newline bitfld.quad 0x00 1. "HWEN060,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" bitfld.quad 0x00 0. "HWEN059,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" group.quad spr:0x36F70++0x00 line.quad 0x00 "ATCR_EL3,CPU Auxiliary Control Register" bitfld.quad 0x00 9. "HWVAL060,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN060 is set" "0,1" bitfld.quad 0x00 8. "HWVAL059,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN059 is set" "0,1" newline bitfld.quad 0x00 1. "HWEN060,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" bitfld.quad 0x00 0. "HWEN059,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" group.quad spr:0x34F71++0x00 line.quad 0x00 "AVTCR_EL2,CPU Auxiliary Control Register" bitfld.quad 0x00 9. "HWVAL060,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN060 is set" "0,1" bitfld.quad 0x00 8. "HWVAL059,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN059 is set" "0,1" newline bitfld.quad 0x00 1. "HWEN060,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" bitfld.quad 0x00 0. "HWEN059,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" endif group.quad spr:0x30F10++0x00 line.quad 0x00 "CPUACTLR_EL1,CPU Auxiliary Control Register" if (CORENAME()=="CORTEXA75") group.quad spr:0x30F11++0x00 line.quad 0x00 "CPUACTLR2_EL1,CPU Auxiliary Control Register 2" group.quad spr:0x30F14++0x00 line.quad 0x00 "CPUECTLR_EL1,CPU Extended Control Register" bitfld.quad 0x00 63. "GBPP,Branch prediction structure invalidation" "0,1" bitfld.quad 0x00 22.--23. "L4_STREAM,Threshold for direct stream to L4 cache on store" "512KB,1024KB,2048KB,Disabled" newline bitfld.quad 0x00 20.--21. "L3_STREAM,Threshold for direct stream to L3 cache on store" "64KB,256KB,512KB,Disabled" bitfld.quad 0x00 18.--19. "L2_STREAM,Threshold for direct stream to L2 cache on store" "16KB,64KB,128KB,Disabled" newline bitfld.quad 0x00 10. "L3PF,Enable L3 prefetch requests sent by the stride prefetcher" "Disabled,Enabled" bitfld.quad 0x00 9. "L2PF,Enable L2 prefetch requests sent by the stride prefetcher" "Disabled,Enabled" newline bitfld.quad 0x00 8. "L1PF,Enable L1 prefetch requests sent by the stride prefetcher" "Disabled,Enabled" bitfld.quad 0x00 7. "RPF,Enable L2 region prefetch requests" "Disabled,Enabled" newline bitfld.quad 0x00 6. "MMUPF,Enable MMU prefetch requests" "Disabled,Enabled" bitfld.quad 0x00 5. "RPF_AGGRO,L2 region prefetcher aggressivity" "Less,More" newline bitfld.quad 0x00 1. "RNSD_EXCL,Enables signaling of cacheable Exclusive loads on the internal interface between the core and the DSU" "Disabled,Enabled" bitfld.quad 0x00 0. "EXTLLC,Type of last-level cache that is present in the system" "Internal,External" elif (CORENAME()=="CORTEXA55") group.quad spr:0x30F14++0x00 line.quad 0x00 "CPUECTLR_EL1,CPU Extended Control Register" bitfld.quad 0x00 38.--39. "ATOM,Force most cacheable atomic instructions to be executed far in the L3 cache or beyond and near in the L1 cache" "Near - hit/unique | Far - miss/shared,Near,Far,Near - load | Far - store" bitfld.quad 0x00 37. "L2FLUSH,L2 cache flush" "Enabled,Disabled" newline bitfld.quad 0x00 29.--30. "L3WSCTL,Write streaming no-L3-allocate threshold" "128th line,1024th line,4096th line,Disabled" bitfld.quad 0x00 27.--28. "L2WSCTL,Write streaming no-L2-allocate threshold" "16th line,128th line,512th line,Disabled" newline bitfld.quad 0x00 25.--26. "L1WSCTL,Write streaming no-L1-allocate threshold" "4th line,64th line,128th line,Disabled" bitfld.quad 0x00 13.--15. "L1PCTL,L1 Data prefetch control. Maximum number of outstanding data prefetches allowed in the L1 memory system" "Disabled,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--12. "L3PCTL,L3 Data prefetch control. Maximum number of outstanding data prefetches allowed that can be sent to the L3 memory system" "16 lines,32 lines,Reserved,Reserved,Disabled,2 lines,4 lines,8 lines" bitfld.quad 0x00 0. "EXTLLC,Indicates that an external Last-level cache is present in the system" "L3 cache,Present" group.quad spr:0x36F81++0x00 line.quad 0x00 "CPUPCR_EL3,CPU Private Control Register" group.quad spr:0x36F83++0x00 line.quad 0x00 "CPUPMR_EL3,CPU Private Mask Register" group.quad spr:0x36F82++0x00 line.quad 0x00 "CPUPOR_EL3,CPU Private Operation Register" group.quad spr:0x36F80++0x00 line.quad 0x00 "CPUPSELR_EL3,CPU Private Selection Register" endif group.quad spr:0x30101++0x00 line.quad 0x00 "ACTLR_EL1,Auxiliary Control register 1" if (CORENAME()=="CORTEXA75") group.quad spr:0x34101++0x00 line.quad 0x00 "ACTLR_EL2,Auxiliary Control register 2" bitfld.quad 0x00 12. "CLUSTERPMUEN,Performance Management Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 11. "SMEN,Scheme Management Registers write access control" "Not accessible,Accessible" newline bitfld.quad 0x00 10. "TSIDEN,Thread Scheme ID Register enable" "Not accessible,Accessible" bitfld.quad 0x00 7. "PWREN,Power Control Registers access control" "Not accessible,Accessible" newline bitfld.quad 0x00 5. "ERXPFGEN,Error Record Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 4. "AMEN,Activity Monitor enable" "Trapped,Not trapped" newline bitfld.quad 0x00 1. "ECTLREN,Extended Control Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 0. "ACTLREN,Auxiliary Control Registers write access control" "Not accessible,Accessible" group.quad spr:0x36101++0x00 line.quad 0x00 "ACTLR_EL3,Auxiliary Control register 3" bitfld.quad 0x00 12. "CLUSTERPMUEN,Performance Management Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 11. "SMEN,Scheme Management Registers write access control" "Not accessible,Accessible" newline bitfld.quad 0x00 10. "TSIDEN,Thread Scheme ID Register enable" "Not accessible,Accessible" bitfld.quad 0x00 7. "PWREN,Power Control Registers access control" "Not accessible,Accessible" newline bitfld.quad 0x00 5. "ERXPFGEN,Error Record Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 4. "AMEN,Activity Monitor enable" "Trapped,Not trapped" newline bitfld.quad 0x00 1. "ECTLREN,Extended Control Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 0. "ACTLREN,Auxiliary Control Registers write access control" "Not accessible,Accessible" group.quad spr:0x30102++0x00 line.quad 0x00 "CPACR_EL1,Coprocessor Access Control Register 1" bitfld.quad 0x00 28. "TTA,Traps EL0 and EL1 System register accesses to all implemented trace registers to EL1" "No trap," bitfld.quad 0x00 20.--21. "FPEN,Floating Point and Advanced SIMD execution to trap to EL1 when executed from EL0 or EL1" "EL0/EL1,EL0,EL0/EL1,No trap" group.quad spr:0x35102++0x00 line.quad 0x00 "CPACR_EL12,Coprocessor Access Control Register 1" bitfld.quad 0x00 28. "TTA,Traps EL0 and EL1 System register accesses to all implemented trace registers to EL1" "No trap," bitfld.quad 0x00 20.--21. "FPEN,Floating Point and Advanced SIMD execution to trap to EL1 when executed from EL0 or EL1" "EL0/EL1,EL0,EL0/EL1,No trap" elif (CORENAME()=="CORTEXA55") group.quad spr:0x34101++0x00 line.quad 0x00 "ACTLR_EL2,Auxiliary Control register 2" bitfld.quad 0x00 12. "CLUSTERPMUEN,Performance Management Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 11. "SMEN,Scheme Management Registers write access control" "Not accessible,Accessible" newline bitfld.quad 0x00 10. "TSIDEN,Thread Scheme ID Register enable" "Not accessible,Accessible" bitfld.quad 0x00 7. "PWREN,Power Control Registers access control" "Not accessible,Accessible" newline bitfld.quad 0x00 5. "ERXPFGEN,Error Record Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 1. "ECTLREN,Extended Control Registers write access control" "Not accessible,Accessible" newline bitfld.quad 0x00 0. "ACTLREN,Auxiliary Control Registers write access control" "Not accessible,Accessible" group.quad spr:0x36101++0x00 line.quad 0x00 "ACTLR_EL3,Auxiliary Control register 3" bitfld.quad 0x00 12. "CLUSTERPMUEN,Performance Management Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 11. "SMEN,Scheme Management Registers write access control" "Not accessible,Accessible" newline bitfld.quad 0x00 10. "TSIDEN,Thread Scheme ID Register enable" "Not accessible,Accessible" bitfld.quad 0x00 7. "PWREN,Power Control Registers access control" "Not accessible,Accessible" newline bitfld.quad 0x00 5. "ERXPFGEN,Error Record Registers write access control" "Not accessible,Accessible" bitfld.quad 0x00 1. "ECTLREN,Extended Control Registers write access control" "Not accessible,Accessible" newline bitfld.quad 0x00 0. "ACTLREN,Auxiliary Control Registers write access control" "Not accessible,Accessible" group.quad spr:0x30102++0x00 line.quad 0x00 "CPACR_EL1,Coprocessor Access Control Register 1" bitfld.quad 0x00 20.--21. "FPEN,Floating Point and Advanced SIMD execution to trap to EL1 when executed from EL0 or EL1" "EL0/EL1,EL0,EL0/EL1,No trap" group.quad spr:0x35102++0x00 line.quad 0x00 "CPACR_EL12,Coprocessor Access Control Register 1" bitfld.quad 0x00 20.--21. "FPEN,Floating Point and Advanced SIMD execution to trap to EL1 when executed from EL0 or EL1" "EL0/EL1,EL0,EL0/EL1,No trap" endif group.quad spr:0x34112++0x00 line.quad 0x00 "CPTR_EL2,Coprocessor Access Control Register 2" bitfld.quad 0x00 31. "TCPAC,Trap Coprocessor Access Control" "No trap,Trap" bitfld.quad 0x00 10. "TFP,Trap Floating Point and Advanced SIMD execution" "No trap,Trap" group.quad spr:0x36112++0x00 line.quad 0x00 "CPTR_EL3,Coprocessor Access Control Register 3" bitfld.quad 0x00 31. "TCPAC,Trap Coprocessor Access Control" "No trap,Trap" bitfld.quad 0x00 10. "TFP,Trap Floating Point and Advanced SIMD execution" "No trap,Trap" group.quad spr:0x36110++0x00 line.quad 0x00 "SCR_EL3,Secure Configuration Register" bitfld.quad 0x00 15. "TERR,Trap Error record accesses" "No Trap,Trap" bitfld.quad 0x00 14. "TLOR,Trap access to the LOR Registers from Non-secure EL1 and EL2 to EL3" "No trap,Trap" newline bitfld.quad 0x00 13. "TWE,Trap WFE" "No trap,Trap" bitfld.quad 0x00 12. "TWI,Trap WFI" "No trap,Trap" newline bitfld.quad 0x00 11. "ST,Enables Secure EL1 access to the CNTPS_TVAL_EL1 CNTPS_CTL_EL1 CNTPS_CVAL_EL1[63:0] registers" "Disabled,Enabled" bitfld.quad 0x00 10. "RW,Register width control for lower exception levels" "AArch32,AArch64" newline bitfld.quad 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted" bitfld.quad 0x00 8. "HCE,Hypervisor Call enable" "Disabled,Enabled" newline bitfld.quad 0x00 7. "SMD,Secure Monitor Call disable at EL1, EL2, or EL3" "No,Yes" bitfld.quad 0x00 3. "EA,External Abort exceptions handled in Abort mode or Monitor mode" "Abort,Monitor" newline bitfld.quad 0x00 2. "FIQ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor" bitfld.quad 0x00 1. "IRQ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor" newline bitfld.quad 0x00 0. "NS,Secure mode " "Secure,Non-secure" group.quad spr:0x34110++0x00 line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register" bitfld.quad 0x00 35. "TLOR,Trap access to the LOR Registers from Non-secure EL1 to EL2" "No trap,Trap" bitfld.quad 0x00 34. "E2H,EL2 Host" "Disabled,Enabled" newline bitfld.quad 0x00 33. "ID,Stage 2 Instruction cache disable" "No,Yes" bitfld.quad 0x00 32. "CD,Stage 2 Data cache disable" "No,Yes" newline bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,EL1 is 64-bit" bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "No trap,Trap" newline bitfld.quad 0x00 28. "TDZ,Trap DC ZVA instruction" "No trap,Trap" bitfld.quad 0x00 27. "TGE,Trap General Exceptions has an enhanced role when EL2 is using AArch64" "No trap,Trap" newline bitfld.quad 0x00 26. "TVM,Trap Virtual Memory controls to EL2" "No trap,Trap" bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions to EL2" "No trap,Trap" newline bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unification to EL2" "No trap,Trap" bitfld.quad 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency to EL2" "No trap,Trap" newline bitfld.quad 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way to EL2" "No trap,Trap" bitfld.quad 0x00 21. "TACR,Trap Auxiliary Control Register" "No trap,Trap" newline bitfld.quad 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "No trap,Trap" bitfld.quad 0x00 19. "TSC,Trap SMC" "No trap,Trap" newline bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "No trap,Trap" bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "No trap,Trap" newline bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "No trap,Trap" bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "No trap,Trap" newline bitfld.quad 0x00 14. "TWE,Trap WFE" "No trap,Trap" bitfld.quad 0x00 13. "TWI,Trap WFI" "No trap,Trap" newline bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled" bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability upgrade. determines the minimum shareability domain that is applied to any barrier executed from EL1 or EL0" "No effect,Inner Shareable,Outer Shareable,Full System" newline bitfld.quad 0x00 9. "FB,Force broadcast" "Not forced,Forced" bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort:" "Not pending,Pending" newline bitfld.quad 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending" bitfld.quad 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending" newline bitfld.quad 0x00 5. "AMO,Asynchronous abort and error interrupt routing" "Disabled,Enabled" bitfld.quad 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled" newline bitfld.quad 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled" bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled" newline bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "Reserved,1" bitfld.quad 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled" group.quad spr:0x30510++0x00 line.quad 0x00 "AFSR0_EL1,Auxiliary Fault Status Registers" group.quad spr:0x35510++0x00 line.quad 0x00 "AFSR0_EL12,Auxiliary Fault Status Registers" group.quad spr:0x30511++0x00 line.quad 0x00 "AFSR1_EL1,Auxiliary Fault Status Registers" group.quad spr:0x35511++0x00 line.quad 0x00 "AFSR1_EL12,Auxiliary Fault Status Registers" group.quad spr:0x34510++0x00 line.quad 0x00 "AFSR0_EL2,Auxiliary Fault Status Registers" group.quad spr:0x34511++0x00 line.quad 0x00 "AFSR1_EL2,Auxiliary Fault Status Registers" group.quad spr:0x36510++0x00 line.quad 0x00 "AFSR0_EL3,Auxiliary Fault Status Registers" group.quad spr:0x36511++0x00 line.quad 0x00 "AFSR1_EL3,Auxiliary Fault Status Registers" tree.open "Exception Syndrome Registers" if (((per.q(spr:0x30520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x30520))&0xFC000000)==0x04000000) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x30520))&0xFC000000)==(0x0C000000||0x14000000)) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x30520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x30520))&0xFC000000)==0x18000000) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x30520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x30520))&0xFC000000)==(0x44000000||0x54000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x30520))&0xFC000000)==0x60000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x30520))&0xFC000000)==(0x80000000||0x84000000)) if (((per.q(spr:0x30520))&0x3F)==(0x10)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif elif (((per.q(spr:0x30520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x30520))&0x3F)==(0x10)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x30520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x30520))&0x3F)==(0x10)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x30520))&0xFC800000)==(0xA0800000||0xB0800000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x30520))&0xFC800000)==(0xA0000000||0xB0000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x30520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x30520))&0x3F)==0x11) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x30520))&0xFD000000)==0xBC000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" elif (((per.q(spr:0x30520))&0xFC000000)==(0xC0000000||0xC4000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,Debug exception,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x30520))&0xFC000000)==(0xC8000000||0xCC000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid" bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,Debug exception,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x30520))&0xFC000000)==(0xD0000000||0xD4000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,?..." elif (((per.q(spr:0x30520))&0xFC000000)==(0xE0000000||0xF0000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" endif if (((per.q(spr:0x35520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x35520))&0xFC000000)==0x04000000) if (((per.q(spr:0x35520))&0x1000000)==0x1000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x35520))&0xFC000000)==(0x0C000000||0x14000000)) if (((per.q(spr:0x35520))&0x1000000)==0x1000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x35520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x35520))&0x1000000)==0x1000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x35520))&0xFC000000)==0x18000000) if (((per.q(spr:0x35520))&0x1000000)==0x1000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x35520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x35520))&0x1000000)==0x1000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x35520))&0xFC000000)==(0x44000000||0x54000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x35520))&0xFC000000)==0x60000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x35520))&0xFC000000)==(0x80000000||0x84000000)) if (((per.q(spr:0x35520))&0x3F)==(0x10)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif elif (((per.q(spr:0x35520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x35520))&0x3F)==(0x10)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x35520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x35520))&0x3F)==(0x10)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x35520))&0xFC800000)==(0xA0800000||0xB0800000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x35520))&0xFC800000)==(0xA0000000||0xB0000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x35520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x35520))&0x3F)==0x11) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x35520))&0xFD000000)==0xBC000000) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" elif (((per.q(spr:0x35520))&0xFC000000)==(0xC0000000||0xC4000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,Debug exception,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x35520))&0xFC000000)==(0xC8000000||0xCC000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid" bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,Debug exception,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x35520))&0xFC000000)==(0xD0000000||0xD4000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,?..." elif (((per.q(spr:0x35520))&0xFC000000)==(0xE0000000||0xF0000000)) group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x35520++0x00 line.quad 0x00 "ESR_EL12,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" endif if (((per.q(spr:0x34520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x34520))&0xFC000000)==0x04000000) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x0C000000||0x14000000||0x20000000)) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x34520))&0xFC000000)==0x18000000) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x34520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x44000000||0x48000000||0x54000000||0x58000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x34520))&0xFC000000)==0x4C000000) if ((((per.q(spr:0x34520))&0x1000000)==0x1000000)&&(((per.q(spr:0x34520))&0xF0000)==0x80000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" elif (((per.q(spr:0x34520))&0xF0000)==0x80000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" endif elif (((per.q(spr:0x34520))&0xFC000000)==0x5C000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the issued SMC instruction" elif (((per.q(spr:0x34520))&0xFC000000)==0x60000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x34520))&0xFC000000)==(0x80000000||0x84000000)) if (((per.q(spr:0x34520))&0x3F)==(0x10)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif elif (((per.q(spr:0x34520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x34520))&0x3F)==(0x10)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x34520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x34520))&0x3F)==(0x10)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x34520))&0xFC800000)==(0xA0800000||0xB0800000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x34520))&0xFC800000)==(0xA0000000||0xB0000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x34520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x34520))&0x3F)==0x11) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" newline newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x34520))&0xFD000000)==0xBC000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" elif (((per.q(spr:0x34520))&0xFC000000)==(0xC0000000||0xC4000000||0xE8000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,Debug exception,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x34520))&0xFC000000)==(0xC8000000||0xCC000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid" bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,Debug exception,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x34520))&0xFC000000)==(0xD0000000||0xD4000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,?..." elif (((per.q(spr:0x34520))&0xFC000000)==(0xE0000000||0xF0000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" endif if (((per.q(spr:0x36520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x36520))&0xFC000000)==0x04000000) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x36520))&0xFC000000)==(0x0C000000||0x14000000)) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x36520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x36520))&0xFC000000)==0x18000000) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x36520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x36520))&0xFC000000)==0x4C000000) if ((((per.q(spr:0x36520))&0x1000000)==0x1000000)&&(((per.q(spr:0x36520))&0xF0000)==0x80000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" elif (((per.q(spr:0x36520))&0xF0000)==0x80000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" endif elif (((per.q(spr:0x36520))&0xFC000000)==(0x54000000||0x58000000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x36520))&0xFC000000)==0x5C000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the issued SMC instruction" elif (((per.q(spr:0x36520))&0xFC000000)==0x60000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x36520))&0xFC000000)==0x7C000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.long 0x00 0.--24. 1. "IMPL_DEF,Implementation defined" elif (((per.q(spr:0x36520))&0xFC000000)==(0x80000000||0x84000000)) if (((per.q(spr:0x36520))&0x3F)==(0x10)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif elif (((per.q(spr:0x36520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x36520))&0x3F)==(0x10)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x36520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x36520))&0x3F)==(0x10)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive/Atomic access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved" endif elif (((per.q(spr:0x36520))&0xFC800000)==0xB0800000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x36520))&0xFC800000)==0xB0000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x36520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x36520))&0x3F)==0x11) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" newline newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x36520))&0xFD000000)==0xBC000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "IDS,Implementation defined syndrome" "Not hold,Hold" elif (((per.q(spr:0x36520))&0xFC000000)==0xF0000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved" endif tree.end newline if (CORENAME()=="CORTEXA75") group.quad spr:0x30C11++0x00 line.quad 0x00 "DISR_EL1,Deferred Interrupt Status Register" bitfld.quad 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined," newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." bitfld.quad 0x00 0.--5. "DFSC,Fault status code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. SError,?..." elif (CORENAME()=="CORTEXA55") if (((per.q(spr:0x30C11))&0x1000000)==0x00)&&(((per.q(spr:0x30C11))&0x3F)==0x11) group.quad spr:0x30C11++0x00 line.quad 0x00 "DISR_EL1,Deferred Interrupt Status Register" bitfld.quad 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined," newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." bitfld.quad 0x00 0.--5. "DFSC,Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Async. SError/AArch32,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. SError/AArch64,?..." else group.quad spr:0x30C11++0x00 line.quad 0x00 "DISR_EL1,Deferred Interrupt Status Register" bitfld.quad 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined," newline bitfld.quad 0x00 0.--5. "DFSC,Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Async. SError/AArch32,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. SError/AArch64,?..." endif endif if (CORENAME()=="CORTEXA75") group.quad spr:0x34523++0x00 line.quad 0x00 "VSESR_EL2,Virtual SError Exception Syndrome Register - EL1 using AArch32" bitfld.quad 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." bitfld.quad 0x00 12. "EXT,External Abort Type" "0,1" group.quad spr:0x34523++0x00 line.quad 0x00 "VSESR_EL2,Virtual SError Exception Syndrome Register - EL1 using AArch64" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined,Implementation-defined" hexmask.quad.tbyte 0x00 0.--23. 1. "ISS,Syndrome information" if (((per.q(spr:0x34C11))&0x200)==0x00) group.quad spr:0x34C11++0x00 line.quad 0x00 "VDISR_EL2,Virtual Deferred Interrupt Status Register - EL1 using the AArch32 Short-descriptor" bitfld.quad 0x00 31. "A,Indicates when ESB defers a virtual SError interrupt" "Not deferred,Deferred" newline bitfld.quad 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." newline bitfld.quad 0x00 9. "LPAE,Translation table format" "Short,Long" bitfld.quad 0x00 0.--3. 10. "FS,Fault status code" ",,,,,,,,,,,,,,,,,,,,,,Asynchronous SError interrupt,?..." else group.quad spr:0x34C11++0x00 line.quad 0x00 "VDISR_EL2,Virtual Deferred Interrupt Status Register - EL1 using the AArch32 Long-descriptor" bitfld.quad 0x00 31. "A,Indicates when ESB defers a virtual SError interrupt" "Not deferred,Deferred" newline bitfld.quad 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." bitfld.quad 0x00 12. "EXT,External abort type" "Internal,External" newline bitfld.quad 0x00 9. "LPAE,Translation table format" "Short,Long" bitfld.quad 0x00 0.--5. "STATUS,Fault status code" ",,,,,,,,,,,,,,,,,Asynchronous SError interrupt,?..." endif group.quad spr:0x34C11++0x00 line.quad 0x00 "VDISR_EL2,Virtual Deferred Interrupt Status Register - EL1 using the AArch64" bitfld.quad 0x00 31. "A,Indicates when ESB defers a virtual SError interrupt" "Not deferred,Deferred" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined,Implementation-defined" newline hexmask.quad.tbyte 0x00 0.--23. 1. "ISS,Syndrome information" elif (CORENAME()=="CORTEXA55") group.quad spr:0x34523++0x00 line.quad 0x00 "VSESR_EL2,Virtual SError Exception Syndrome Register - EL1 using AArch32" bitfld.quad 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." group.quad spr:0x34523++0x00 line.quad 0x00 "VSESR_EL2,Virtual SError Exception Syndrome Register - EL1 using AArch64" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined,Implementation-defined" hexmask.quad.tbyte 0x00 0.--23. 1. "ISS,Syndrome information" if (((per.q(spr:0x34C11))&0x200)==0x00) group.quad spr:0x34C11++0x00 line.quad 0x00 "VDISR_EL2,Virtual Deferred Interrupt Status Register - EL1 using the AArch32 Short-descriptor" bitfld.quad 0x00 31. "A,Indicates when ESB defers a virtual SError interrupt" "Not deferred,Deferred" bitfld.quad 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." newline bitfld.quad 0x00 9. "LPAE,Translation table format" "Short,Long" bitfld.quad 0x00 0.--3. 10. "FS,Fault status code" ",,,,,,,,,,,,,,,,,,,,,,Asynchronous SError interrupt,?..." else group.quad spr:0x34C11++0x00 line.quad 0x00 "VDISR_EL2,Virtual Deferred Interrupt Status Register - EL1 using the AArch32 Long-descriptor" bitfld.quad 0x00 31. "A,Indicates when ESB defers a virtual SError interrupt" "Not deferred,Deferred" bitfld.quad 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." newline bitfld.quad 0x00 9. "LPAE,Translation table format" "Short,Long" bitfld.quad 0x00 0.--5. "STATUS,Fault status code" ",,,,,,,,,,,,,,,,,Asynchronous SError interrupt,?..." endif group.quad spr:0x34C11++0x00 line.quad 0x00 "VDISR_EL2,Virtual Deferred Interrupt Status Register - EL1 using the AArch64" bitfld.quad 0x00 31. "A,Indicates when ESB defers a virtual SError interrupt" "Not deferred,Deferred" bitfld.quad 0x00 24. "IDS,Indicates the type of format the deferred SError interrupt uses" "Architecturally-defined,Implementation-defined" newline hexmask.quad.tbyte 0x00 0.--23. 1. "ISS,Syndrome information" endif if (((per.q(c15:0x0202))&0x80000000)==0x00000000) group.quad spr:0x34501++0x00 line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register" bitfld.quad 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.quad 0x00 12. "EXT,External abort type" "0,1" newline bitfld.quad 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.quad 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/L1,Permission/section,Sync. external/on TTW/L2,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/L1,Reserved,Sync. parity/on TTW/L2,?..." else group.quad spr:0x34501++0x00 line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register" bitfld.quad 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.quad 0x00 12. "EXT,External abort type" "0,1" newline bitfld.quad 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.quad 0x00 0.--5. "STATUS,Fault Status" "Reserved,Reserved,Reserved,Reserved,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/L1,Sync. parity/on memory access/on TTW/L2,Sync. parity/on memory access/on TTW/L3,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif group.quad spr:0x30600++0x00 line.quad 0x00 "FAR_EL1,Fault Address Register" group.quad spr:0x35600++0x00 line.quad 0x00 "FAR_EL12,Fault Address Register" group.quad spr:0x34600++0x00 line.quad 0x00 "FAR_EL2,Fault Address Register" group.quad spr:0x36600++0x00 line.quad 0x00 "FAR_EL3,Fault Address Register" group.quad spr:0x34604++0x00 line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register" hexmask.quad 0x00 4.--43. 0x10 "FIPA[51:12],Bits [51:12] of the faulting intermediate physical address" group.quad spr:0x31F30++0x00 line.quad 0x00 "CBAR_EL1,Configuration Base Address Register EL1" hexmask.quad.long 0x00 18.--43. 0x4 "PERIPHBASE,Holds the physical base address of the memory-mapped GIC CPU interface registers" group.quad spr:0x30C00++0x00 line.quad 0x00 "VBAR_EL1,Vector Base Address Register" hexmask.quad 0x00 11.--63. 0x8 "VBA,Vector Base Address" group.quad spr:0x35C00++0x00 line.quad 0x00 "VBAR_EL12,Vector Base Address Register" hexmask.quad 0x00 11.--63. 0x8 "VBA,Vector Base Address" group.quad spr:0x34C00++0x00 line.quad 0x00 "VBAR_EL2,Vector Base Address Register" hexmask.quad 0x00 11.--63. 0x8 "VBA,Vector Base Address" group.quad spr:0x36C00++0x00 line.quad 0x00 "VBAR_EL3,Vector Base Address Register" hexmask.quad 0x00 11.--63. 0x8 "VBA,Vector Base Address" if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x36C01++0x00 line.quad 0x00 "RVBAR_EL3,Reset Vector Base Address Register" hexmask.quad.pbyte 0x00 2.--39. 0x1 "RVBA,Reset Vector Base Address" elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x36C01++0x00 line.quad 0x00 "RVBAR_EL3,Reset Vector Base Address Register" hexmask.quad.hbyte 0x00 2.--43. 0x1 "RVBA,Reset Vector Base Address" endif group.quad spr:0x30C02++0x00 line.quad 0x00 "RMR_EL1,Reset Management Register" bitfld.quad 0x00 1. "RR,Reset Request" "Not requested,Requested" bitfld.quad 0x00 0. "AA64,Determines which execution state the processor boots into after a warm reset" "AArch32,AArch64" group.quad spr:0x36C02++0x00 line.quad 0x00 "RMR_EL3,Reset Management Register" bitfld.quad 0x00 1. "RR,Reset Request" "Not requested,Requested" bitfld.quad 0x00 0. "AA64,Determines which execution state the processor boots into after a warm reset" "AArch32,AArch64" rgroup.quad spr:0x30C10++0x00 line.quad 0x00 "ISR_EL1,Interrupt Status Register" bitfld.quad 0x00 8. "A,SError interrupt pending bit" "Not pending,Pending" bitfld.quad 0x00 7. "I,IRQ pending bit" "Not pending,Pending" newline bitfld.quad 0x00 6. "F,FIQ pending bit" "Not pending,Pending" group.quad spr:0x30D01++0x00 line.quad 0x00 "CONTEXTIDR_EL1,Context ID Register" hexmask.quad.long 0x00 0.--31. 1. "PROCID,Process identifier" group.quad spr:0x35D01++0x00 line.quad 0x00 "CONTEXTIDR_EL12,Context ID Register" hexmask.quad.long 0x00 0.--31. 1. "PROCID,Process identifier" group.quad spr:0x34D01++0x00 line.quad 0x00 "CONTEXTIDR_EL2,Context ID Register" hexmask.quad.long 0x00 0.--31. 1. "PROCID,Process identifier" group.quad spr:0x33D02++0x00 line.quad 0x00 "TPIDR_EL0,Software Thread ID registers" group.quad spr:0x33D03++0x00 line.quad 0x00 "TPIDRRO_EL0,Software Thread ID registers" group.quad spr:0x30D04++0x00 line.quad 0x00 "TPIDR_EL1,Software Thread ID registers" group.quad spr:0x34D02++0x00 line.quad 0x00 "TPIDR_EL2,Software Thread ID registers" group.quad spr:0x36D02++0x00 line.quad 0x00 "TPIDR_EL3,Software Thread ID registers" tree "System Instructions" wgroup.quad spr:0x10710++0x00 line.quad 0x00 "IC_IALLUIS,IC_IALLUIS" wgroup.quad spr:0x10750++0x00 line.quad 0x00 "IC_IALLU,IC_IALLU" wgroup.quad spr:0x13751++0x00 line.quad 0x00 "IC_IVAU,IC_IVAU" wgroup.quad spr:0x13741++0x00 line.quad 0x00 "DC_ZVA,DC_ZVA" wgroup.quad spr:0x10761++0x00 line.quad 0x00 "DC_IVAC,DC_IVAC" wgroup.quad spr:0x10762++0x00 line.quad 0x00 "DC_ISW,DC_ISW" wgroup.quad spr:0x137A1++0x00 line.quad 0x00 "DC_CVAC,DC_CVAC" wgroup.quad spr:0x137C1++0x00 line.quad 0x00 "DC_CVAP,DC CVAP" wgroup.quad spr:0x107A2++0x00 line.quad 0x00 "DC_CSW,DC_CSW" wgroup.quad spr:0x137B1++0x00 line.quad 0x00 "DC_CVAU,DC_CVAU" wgroup.quad spr:0x137E1++0x00 line.quad 0x00 "DC_CIVAC,DC_CIVAC" wgroup.quad spr:0x107E2++0x00 line.quad 0x00 "DC_CISW,DC_CISW" wgroup.quad spr:0x10780++0x00 line.quad 0x00 "AT_S1E1R,AT_S1E1R" wgroup.quad spr:0x10781++0x00 line.quad 0x00 "AT_S1E1W,AT_S1E1W" wgroup.quad spr:0x10782++0x00 line.quad 0x00 "AT_S1E0R,AT_S1E0R" wgroup.quad spr:0x10790++0x00 line.quad 0x00 "AT_S1E1RP,AT_S1E1RP" wgroup.quad spr:0x10791++0x00 line.quad 0x00 "AT_S1E1WP,AT_S1E1WP" wgroup.quad spr:0x10783++0x00 line.quad 0x00 "AT_S1E0W,AT_S1E0W" wgroup.quad spr:0x14784++0x00 line.quad 0x00 "AT_S12E1R,AT_S12E1R" wgroup.quad spr:0x14785++0x00 line.quad 0x00 "AT_S12E1W,AT_S12E1W" wgroup.quad spr:0x14786++0x00 line.quad 0x00 "AT_S12E0R,AT_S12E0R" wgroup.quad spr:0x14787++0x00 line.quad 0x00 "AT_S12E0W,AT_S12E0W" wgroup.quad spr:0x14780++0x00 line.quad 0x00 "AT_S1E2R,AT_S1E2R" wgroup.quad spr:0x14781++0x00 line.quad 0x00 "AT_S1E2W,AT_S1E2W" wgroup.quad spr:0x16780++0x00 line.quad 0x00 "AT_S1E3R,AT_S1E3R" wgroup.quad spr:0x16781++0x00 line.quad 0x00 "AT_S1E3W,AT_S1E3W" wgroup.quad spr:0x10870++0x00 line.quad 0x00 "TLBI_VMALLE1,TLBI_VMALLE1" wgroup.quad spr:0x10871++0x00 line.quad 0x00 "TLBI_VAE1,TLBI_VAE1" wgroup.quad spr:0x10872++0x00 line.quad 0x00 "TLBI_ASIDE1,TLBI_ASIDE1" wgroup.quad spr:0x10873++0x00 line.quad 0x00 "TLBI_VAAE1,TLBI_VAAE1" wgroup.quad spr:0x10875++0x00 line.quad 0x00 "TLBI_VALE1,TLBI_VALE1" wgroup.quad spr:0x10877++0x00 line.quad 0x00 "TLBI_VAALE1,TLBI_VAALE1" wgroup.quad spr:0x10830++0x00 line.quad 0x00 "TLBI_VMALLE1IS,TLBI_VMALLE1IS" wgroup.quad spr:0x10831++0x00 line.quad 0x00 "TLBI_VAE1IS,TLBI_VAE1IS" wgroup.quad spr:0x10832++0x00 line.quad 0x00 "TLBI_ASIDE1IS,TLBI_ASIDE1IS" wgroup.quad spr:0x10833++0x00 line.quad 0x00 "TLBI_VAAE1IS,TLBI_VAAE1IS" wgroup.quad spr:0x10835++0x00 line.quad 0x00 "TLBI_VALE1IS,TLBI_VALE1IS" wgroup.quad spr:0x10837++0x00 line.quad 0x00 "TLBI_VAALE1IS,TLBI_VAALE1IS" wgroup.quad spr:0x14801++0x00 line.quad 0x00 "TLBI_IPAS2E1IS,TLBI_IPAS2E1IS" wgroup.quad spr:0x14805++0x00 line.quad 0x00 "TLBI_IPAS2LE1IS,TLBI_IPAS2LE1IS" wgroup.quad spr:0x14841++0x00 line.quad 0x00 "TLBI_IPAS2E1,TLBI_IPAS2E1" wgroup.quad spr:0x14845++0x00 line.quad 0x00 "TLBI_IPAS2LE1,TLBI_IPAS2LE1" wgroup.quad spr:0x14871++0x00 line.quad 0x00 "TLBI_VAE2,TLBI_VAE2" wgroup.quad spr:0x14875++0x00 line.quad 0x00 "TLBI_VALE2,TLBI_VALE2" wgroup.quad spr:0x14876++0x00 line.quad 0x00 "TLBI_VMALLS12E1,TLBI_VMALLS12E1" wgroup.quad spr:0x14831++0x00 line.quad 0x00 "TLBI_VAE2IS,TLBI_VAE2IS" wgroup.quad spr:0x14835++0x00 line.quad 0x00 "TLBI_VALE2IS,TLBI_VALE2IS" wgroup.quad spr:0x14836++0x00 line.quad 0x00 "TLBI_VMALLS12E1IS,TLBI_VMALLS12E1IS" wgroup.quad spr:0x16871++0x00 line.quad 0x00 "TLBI_VAE3,TLBI_VAE3" wgroup.quad spr:0x16875++0x00 line.quad 0x00 "TLBI_VALE3,TLBI_VALE3" wgroup.quad spr:0x16831++0x00 line.quad 0x00 "TLBI_VAE3IS,TLBI_VAE3IS" wgroup.quad spr:0x16835++0x00 line.quad 0x00 "TLBI_VALE3IS,TLBI_VALE3IS" wgroup.quad spr:0x14870++0x00 line.quad 0x00 "TLBI_ALLE2,TLBI_ALLE2" wgroup.quad spr:0x14830++0x00 line.quad 0x00 "TLBI_ALLE2IS,TLBI_ALLE2IS" wgroup.quad spr:0x14874++0x00 line.quad 0x00 "TLBI_ALLE1,TLBI_ALLE1" wgroup.quad spr:0x14834++0x00 line.quad 0x00 "TLBI_ALLE1IS,TLBI_ALLE1IS" wgroup.quad spr:0x16870++0x00 line.quad 0x00 "TLBI_ALLE3,TLBI_ALLE3" wgroup.quad spr:0x16830++0x00 line.quad 0x00 "TLBI_ALLE3IS,TLBI_ALLE3IS" tree.end tree.end tree "Memory Management Unit" tree.open "Hypervisor Configuration System Registers" group.quad spr:0x34113++0x00 line.quad 0x00 "HSTR_EL2,Hypervisor System Trap Register" bitfld.quad 0x00 15. "T15,Trap to Hypervisor mode Non-secure priv 15" "No trap,Trap" bitfld.quad 0x00 13. "T13,Trap to Hypervisor mode Non-secure priv 13" "No trap,Trap" bitfld.quad 0x00 12. "T12,Trap to Hypervisor mode Non-secure priv 12" "No trap,Trap" newline bitfld.quad 0x00 11. "T11,Trap to Hypervisor mode Non-secure priv 11" "No trap,Trap" bitfld.quad 0x00 10. "T10,Trap to Hypervisor mode Non-secure priv 10" "No trap,Trap" bitfld.quad 0x00 9. "T9,Trap to Hypervisor mode Non-secure priv 9" "No trap,Trap" newline bitfld.quad 0x00 8. "T8,Trap to Hypervisor mode Non-secure priv 8" "No trap,Trap" bitfld.quad 0x00 7. "T7,Trap to Hypervisor mode Non-secure priv 7" "No trap,Trap" bitfld.quad 0x00 6. "T6,Trap to Hypervisor mode Non-secure priv 6" "No trap,Trap" newline bitfld.quad 0x00 5. "T5,Trap to Hypervisor mode Non-secure priv 5" "No trap,Trap" bitfld.quad 0x00 3. "T3,Trap to Hypervisor mode Non-secure priv 3" "No trap,Trap" bitfld.quad 0x00 2. "T2,Trap to Hypervisor mode Non-secure priv 2" "No trap,Trap" newline bitfld.quad 0x00 1. "T1,Trap to Hypervisor mode Non-secure priv 1" "No trap,Trap" bitfld.quad 0x00 0. "T0,Trap to Hypervisor mode Non-secure priv 0" "No trap,Trap" group.quad spr:0x34117++0x00 line.quad 0x00 "HACR_EL2,Hypervisor Auxiliary Configuration Register" tree.end if (CORENAME()=="CORTEXA75") group.quad spr:0x30200++0x00 line.quad 0x00 "TTBR0_EL1,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 0x2 "BADDR[47:1],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x30201++0x00 line.quad 0x00 "TTBR1_EL1,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 0x2 "BADDR[47:1],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x35200++0x00 line.quad 0x00 "TTBR0_EL12,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 0x2 "BADDR[47:1],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x35201++0x00 line.quad 0x00 "TTBR1_EL12,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 0x2 "BADDR[47:1],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x34200++0x00 line.quad 0x00 "TTBR0_EL2,Translation Table Base Registers" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x34201++0x00 line.quad 0x00 "TTBR1_EL2,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 0x2 "BADDR[47:1],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x36200++0x00 line.quad 0x00 "TTBR0_EL3,Translation Table Base Registers" hexmask.quad 0x00 1.--47. 0x2 "BADDR[47:1],Translation table base address" bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x34210++0x00 line.quad 0x00 "VTTBR_EL2,Virtualization Translation Table Base Register" hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table" hexmask.quad 0x00 4.--47. 0x10 "BADDR[47:4],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" elif (CORENAME()=="CORTEXA55") group.quad spr:0x30200++0x00 line.quad 0x00 "TTBR0_EL1,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x30201++0x00 line.quad 0x00 "TTBR1_EL1,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x35200++0x00 line.quad 0x00 "TTBR0_EL12,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x35201++0x00 line.quad 0x00 "TTBR1_EL12,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x34200++0x00 line.quad 0x00 "TTBR0_EL2,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x34201++0x00 line.quad 0x00 "TTBR1_EL2,Translation Table Base Registers" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x36200++0x00 line.quad 0x00 "TTBR0_EL3,Translation Table Base Registers" hexmask.quad 0x00 2.--47. 0x4 "BADDR[47:2],Translation table base address" bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad spr:0x34210++0x00 line.quad 0x00 "VTTBR_EL2,Virtualization Translation Table Base Register" hexmask.quad.word 0x00 48.--63. 1. "VMID,The VMID for the translation table" hexmask.quad 0x00 2.--47. 0x04 "BADDR[47:1],Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported," endif group.quad spr:0x30202++0x00 line.quad 0x00 "TCR_EL1,Translation Control Registers" bitfld.quad 0x00 50. "HWU162,Hardware use of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 49. "HWU161,Hardware use of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 48. "HWU160,Hardware use of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 47. "HWU159,Hardware use of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 46. "HWU062,Hardware use of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 45. "HWU061,Hardware use of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 44. "HWU060,Hardware use of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 43. "HWU059,Hardware use of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 42. "HPD1,Hierarchical Permission Disable for the TTBR1 region" "No,Yes" bitfld.quad 0x00 41. "HPD0,Hierarchical Permission Disable for the TTBR0 region" "No,Yes" newline bitfld.quad 0x00 40. "HD,Hardware Update of the Dirty Bit Enable - Stage 1" "Disabled,Enabled" bitfld.quad 0x00 39. "HA,Hardware Update of the Access Bit Enable - Stage 1" "Disabled,Enabled" newline bitfld.quad 0x00 38. "TBI1,Top Byte ignored" "Used,Ignored" bitfld.quad 0x00 37. "TBI0,Top Byte ignored" "Used,Ignored" newline bitfld.quad 0x00 36. "AS,ASID Size" "8 bit,16 bit" bitfld.quad 0x00 32.--34. "IPS,IPASize" "4GByte,64GByte,1TByte,?..." newline bitfld.quad 0x00 30.--31. "TG1,TTBR1_EL1 Granule size" "Reserved,16KByte,4KByte,64KByte" bitfld.quad 0x00 28.--29. "SH1,Shareability attributes for TTBR1 as described in LPAE" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 26.--27. "ORGN1,Outer Cacheability attributes for TTBR1 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" bitfld.quad 0x00 24.--25. "IRGN1,Inner Cacheability attributes for TTBR1 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" newline bitfld.quad 0x00 23. "EPD1,Translation Table walk disable for TTBR1 as described in LPAE" "No,Yes" bitfld.quad 0x00 22. "A1,ASID definition from TTBR0 or TTBR1" "TTBR0_EL1,TTBR1_EL1" newline bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region for TTBR1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.quad 0x00 14.--15. "TG0,TTBR0_ELx Granule size" "4KByte,64KByte,16KByte,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for TTBR0 as described in LPAE" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for TTBR0 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for TTBR0 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 7. "EPD0,Translation Table walk disable for TTBR0 as described in LPAE" "No,Yes" newline bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region for TTBR0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.quad spr:0x35202++0x00 line.quad 0x00 "TCR_EL12,Translation Control Registers" bitfld.quad 0x00 50. "HWU162,Hardware use of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 49. "HWU161,Hardware use of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 48. "HWU160,Hardware use of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 47. "HWU159,Hardware use of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 46. "HWU062,Hardware use of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 45. "HWU061,Hardware use of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 44. "HWU060,Hardware use of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 43. "HWU059,Hardware use of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 42. "HPD1,Hierarchical Permission Disable for the TTBR1 region" "No,Yes" bitfld.quad 0x00 41. "HPD0,Hierarchical Permission Disable for the TTBR0 region" "No,Yes" newline bitfld.quad 0x00 40. "HD,Hardware Update of the Dirty Bit Enable - Stage 1" "Disabled,Enabled" bitfld.quad 0x00 39. "HA,Hardware Update of the Access Bit Enable - Stage 1" "Disabled,Enabled" newline bitfld.quad 0x00 38. "TBI1,Top Byte ignored" "Used,Ignored" bitfld.quad 0x00 37. "TBI0,Top Byte ignored" "Used,Ignored" newline bitfld.quad 0x00 36. "AS,ASID Size" "8 bit,16 bit" bitfld.quad 0x00 32.--34. "IPS,IPASize" "4GByte,64GByte,1TByte,?..." newline bitfld.quad 0x00 30.--31. "TG1,TTBR1_EL1 Granule size" "Reserved,16KByte,4KByte,64KByte" bitfld.quad 0x00 28.--29. "SH1,Shareability attributes for TTBR1 as described in LPAE" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 26.--27. "ORGN1,Outer Cacheability attributes for TTBR1 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" bitfld.quad 0x00 24.--25. "IRGN1,Inner Cacheability attributes for TTBR1 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" newline bitfld.quad 0x00 23. "EPD1,Translation Table walk disable for TTBR1 as described in LPAE" "No,Yes" bitfld.quad 0x00 22. "A1,ASID definition from TTBR0 or TTBR1" "TTBR0_EL1,TTBR1_EL1" newline bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region for TTBR1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.quad 0x00 14.--15. "TG0,TTBR0_ELx Granule size" "4KByte,64KByte,16KByte,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for TTBR0 as described in LPAE" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for TTBR0 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for TTBR0 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 7. "EPD0,Translation Table walk disable for TTBR0 as described in LPAE" "No,Yes" newline bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region for TTBR0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" if (((per.q(spr:0x34110))&0x400000000)==0x000000000) group.quad spr:0x34202++0x00 line.quad 0x00 "TCR_EL2,Translation Control Registers" bitfld.quad 0x00 28. "HWU62,Hardware usage of bit[62] of the stage1 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 27. "HWU61,Hardware usage of bit[61] of the stage1 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 26. "HWU60,Hardware usage of bit[60] of the stage1 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 25. "HWU59,Hardware usage of bit[59] of the stage1 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 24. "HPD,Hierarchical Permission Disable" "No,Yes" bitfld.quad 0x00 22. "HD,Hardware Update of the Dirty Bit Enable - Stage 1" "Disabled,Enabled" newline bitfld.quad 0x00 21. "HA,Hardware Update of the Access Bit Enable - Stage 1" "Disabled,Enabled" bitfld.quad 0x00 20. "TBI,Top Byte ignored" "Used,Ignored" newline bitfld.quad 0x00 16.--18. "PS,PASize" "4GByte,64GByte,1TByte,?..." bitfld.quad 0x00 14.--15. "TG0,TTBR0_ELx Granule size" "4KByte,64KByte,16KByte,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for TTBR_ELx as described in LPAE" "Non-shareable,Reserved,Outer shareable,Inner shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for TTBR_ELx as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for TTBR_ELx as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 0.--5. "T0SZ,Size of virtual address for TTBR_ELx" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" else group.quad spr:0x34202++0x00 line.quad 0x00 "TCR_EL2,Translation Control Registers" bitfld.quad 0x00 50. "HWU162,Hardware use of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 49. "HWU161,Hardware use of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 48. "HWU160,Hardware use of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 47. "HWU159,Hardware use of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 46. "HWU062,Hardware use of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 45. "HWU061,Hardware use of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 44. "HWU060,Hardware use of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" bitfld.quad 0x00 43. "HWU059,Hardware use of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0_EL1/EL2" "Not possible,Possible" newline bitfld.quad 0x00 42. "HPD1,Hierarchical Permission Disable for the TTBR1 region" "No,Yes" bitfld.quad 0x00 41. "HPD0,Hierarchical Permission Disable for the TTBR0 region" "No,Yes" newline bitfld.quad 0x00 40. "HD,Hardware Update of the Dirty Bit Enable - Stage 1" "Disabled,Enabled" bitfld.quad 0x00 39. "HA,Hardware Update of the Access Bit Enable - Stage 1" "Disabled,Enabled" newline bitfld.quad 0x00 38. "TBI1,Top Byte ignored" "Used,Ignored" bitfld.quad 0x00 37. "TBI0,Top Byte ignored" "Used,Ignored" newline bitfld.quad 0x00 36. "AS,ASID Size" "8 bit,16 bit" bitfld.quad 0x00 32.--34. "IPS,IPASize" "4GByte,64GByte,1TByte,?..." newline bitfld.quad 0x00 30.--31. "TG1,TTBR1_EL1 Granule size" "Reserved,16KByte,4KByte,64KByte" bitfld.quad 0x00 28.--29. "SH1,Shareability attributes for TTBR1 as described in LPAE" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 26.--27. "ORGN1,Outer Cacheability attributes for TTBR1 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" bitfld.quad 0x00 24.--25. "IRGN1,Inner Cacheability attributes for TTBR1 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" newline bitfld.quad 0x00 23. "EPD1,Translation Table walk disable for TTBR1 as described in LPAE" "No,Yes" bitfld.quad 0x00 22. "A1,ASID definition from TTBR0 or TTBR1" "TTBR0_EL1,TTBR1_EL1" newline bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region for TTBR1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.quad 0x00 14.--15. "TG0,TTBR0_ELx Granule size" "4KByte,64KByte,16KByte,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for TTBR0 as described in LPAE" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for TTBR0 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for TTBR0 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 7. "EPD0,Translation Table walk disable for TTBR0 as described in LPAE" "No,Yes" newline bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region for TTBR0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" endif if (CORENAME()=="CORTEXA75") group.quad spr:0x36202++0x00 line.quad 0x00 "TCR_EL3,Translation Control Registers" bitfld.quad 0x00 28. "HWU62,Hardware usage of bit[62] of the stage1 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 27. "HWU61,Hardware usage of bit[61] of the stage1 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 26. "HWU60,Hardware usage of bit[60] of the stage1 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 25. "HWU59,Hardware usage of bit[59] of the stage1 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 24. "HPD,Hierarchical Permission Disable" "No,Yes" bitfld.quad 0x00 22. "HD,Hardware Update of the Dirty Bit Enable - Stage 1" "Disabled,Enabled" newline bitfld.quad 0x00 21. "HA,Hardware Update of the Access Bit Enable - Stage 1" "Disabled,Enabled" bitfld.quad 0x00 20. "TBI,Top Byte ignored" "Used,Ignored" newline bitfld.quad 0x00 16.--18. "PS,PASize" "4GByte,64GByte,1TByte,4TByte,16TByte,256TB,4PB,?..." bitfld.quad 0x00 14.--15. "TG0,TTBR0_ELx Granule size" "4KByte,64KByte,16KByte,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for TTBR_ELx as described in LPAE" "Non-shareable,Reserved,Outer shareable,Inner shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for TTBR_ELx as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for TTBR_ELx as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 0.--5. "T0SZ,Size of virtual address for TTBR_ELx" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (CORENAME()=="CORTEXA55") group.quad spr:0x36202++0x00 line.quad 0x00 "TCR_EL3,Translation Control Registers" bitfld.quad 0x00 28. "HWU62,Hardware usage of bit[62] of the stage1 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 27. "HWU61,Hardware usage of bit[61] of the stage1 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 26. "HWU60,Hardware usage of bit[60] of the stage1 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 25. "HWU59,Hardware usage of bit[59] of the stage1 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 24. "HPD,Hierarchical Permission Disable" "No,Yes" bitfld.quad 0x00 22. "HD,Hardware Update of the Dirty Bit Enable - Stage 1" "Disabled,Enabled" newline bitfld.quad 0x00 21. "HA,Hardware Update of the Access Bit Enable - Stage 1" "Disabled,Enabled" bitfld.quad 0x00 20. "TBI,Top Byte ignored" "Used,Ignored" newline bitfld.quad 0x00 16.--18. "PS,PASize" "4GByte,64GByte,1TByte,?..." bitfld.quad 0x00 14.--15. "TG0,TTBR0_ELx Granule size" "4KByte,64KByte,16KByte,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for TTBR_ELx as described in LPAE" "Non-shareable,Reserved,Outer shareable,Inner shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for TTBR_ELx as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for TTBR_ELx as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 0.--5. "T0SZ,Size of virtual address for TTBR_ELx" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" endif if (((per.q(spr:0x34212))&0xC000)==0x0) group.quad spr:0x34212++0x00 line.quad 0x00 "VTCR_EL2,Virtualization Translation Control Register" bitfld.quad 0x00 28. "HWU62,Hardware usage of bit[62] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 27. "HWU61,Hardware usage of bit[61] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 26. "HWU60,Hardware usage of bit[60] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 25. "HWU59,Hardware usage of bit[59] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 22. "HD,Hardware Update of the Dirty Bit Enable - Stage 2" "Disabled,Enabled" bitfld.quad 0x00 21. "HA,Hardware Update of the Access Bit Enable - Stage 2" "Disabled,Enabled" newline bitfld.quad 0x00 19. "VS,VMID Size" "8-bit,16-bit" bitfld.quad 0x00 16.--18. "PS,PASize" "4GByte,64GByte,1TByte,4TByte,16TByte,256TByte,?..." newline bitfld.quad 0x00 14.--15. "TG0,VTTBR0_EL2 Granule size" "4KByte,64KByte,16KByte,?..." bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for VTTBR_EL2 as described in LPAE" "Non-shareable,Reserved,Outer shareable,Inner shareable" newline bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for VTTBR_EL2 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for VTTBR_EL2 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" newline bitfld.quad 0x00 6.--7. "SL0,Starting level of the VTCR_EL2 addressed region" "Level 2,Level 1,Level 0,?..." bitfld.quad 0x00 0.--5. "T0SZ,Size of virtual address for VTTBR_EL2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" else group.quad spr:0x34212++0x00 line.quad 0x00 "VTCR_EL2,Virtualization Translation Control Register" bitfld.quad 0x00 28. "HWU62,Hardware usage of bit[62] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 27. "HWU61,Hardware usage of bit[61] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 26. "HWU60,Hardware usage of bit[60] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" bitfld.quad 0x00 25. "HWU59,Hardware usage of bit[59] of the stage 2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.quad 0x00 22. "HD,Hardware Update of the Dirty Bit Enable - Stage 2" "Disabled,Enabled" bitfld.quad 0x00 21. "HA,Hardware Update of the Access Bit Enable - Stage 2" "Disabled,Enabled" newline bitfld.quad 0x00 19. "VS,VMID Size" "8-bit,16-bit" bitfld.quad 0x00 16.--18. "PS,PASize" "4GByte,64GByte,1TByte,4TByte,16TByte,256TByte,?..." newline bitfld.quad 0x00 14.--15. "TG0,VTTBR0_EL2 Granule size" "4KByte,64KByte,16KByte,?..." bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for VTTBR_EL2 as described in LPAE" "Non-shareable,Reserved,Outer shareable,Inner shareable" newline bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for VTTBR_EL2 as described in LPAE" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for VTTBR_EL2 as described in LPAE" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" newline bitfld.quad 0x00 6.--7. "SL0,Starting level of the VTCR_EL2 addressed region" "Level 3,Level 2,Level 1,?..." bitfld.quad 0x00 0.--5. "T0SZ,Size of virtual address for VTTBR_EL2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" endif if (CORENAME()=="CORTEXA75") if (((per.q(spr:0x30740))&0xF000000000000001)==0x0000000000000000) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" newline bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Device-nGnRnE memory,---,---,---,Device-nGnRE memory,---,---,---,Device-nGRE memory,---,---,---,Device-GRE memory,---,---,---" newline hexmask.quad 0x00 12.--43. 0x10 "PA[47:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif ((((per.q(spr:0x30740))&0x01)==0x00)&&(((per.q(spr:0x30740))&0xF000000000000000)==(0x1000000000000000||0x2000000000000000||0x3000000000000000||0x5000000000000000||0x6000000000000000||0x7000000000000000))) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" newline newline hexmask.quad 0x00 12.--43. 0x10 "PA[47:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif (((per.q(spr:0x30740))&0x01)==0x00) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" newline bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "---,Inner Write-Through Transient W,Inner Write-Through Transient R,Inner Write-Through Transient RW,Inner Non-cacheable,Inner Write-Back Transient R,Inner Write-Back Transient W,Inner Write-Back Transient RW,Inner Write-Through Non-transient,Inner Write-Through Non-transient W,Inner Write-Through Non-transient R,Inner Write-Through Non-transient RW,Inner Write-Back Non-transient,Inner Write-Back Non-transient W,Inner Write-Back Non-transient R,Inner Write-Back Non-transient RW" newline hexmask.quad 0x00 12.--43. 0x10 "PA[47:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" else group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 9. "S,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2" bitfld.quad 0x00 8. "PTW,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes" newline bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Address size fault/zeroth level/TTBR,Address size fault/first level,Address size fault/second level,Address size fault/third level,Translation fault/zeroth level,Translation fault/first level,Translation fault/second level,Translation fault/third level,Reserved,Access flag fault/first level,Access flag fault/second level,Access flag fault/third level,Reserved,Permission fault/first level,Permission fault/second level,Permission fault/third level,Synchronous external abort/not TTBR,Reserved,Reserved,Reserved,Synchronous external abort/TTBR/zeroth level,Synchronous external abort/TTBR/first level,Synchronous external abort/TTBR/second level,Synchronous external abort/TTBR/third level,Synchronous parity/ECC error/not TTBR,Reserved,Reserved,Reserved,Synchronous parity/ECC error/TTBR/zeroth level,Synchronous parity/ECC error/TTBR/first level,Synchronous parity/ECC error/TTBR/second level,Synchronous parity/ECC error/TTBR/third level,Reserved,Alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain fault,Page Domain fault,Reserved" newline newline newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" endif elif (CORENAME()=="CORTEXA55") if (((per.q(spr:0x30740))&0xF000000000000001)==0x0000000000000000) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" newline bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Device-nGnRnE memory,---,---,---,Device-nGnRE memory,---,---,---,Device-nGRE memory,---,---,---,Device-GRE memory,---,---,---" newline hexmask.quad.long 0x00 12.--39. 0x10 "PA[39:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif ((((per.q(spr:0x30740))&0x01)==0x00)&&(((per.q(spr:0x30740))&0xF000000000000000)==(0x1000000000000000||0x2000000000000000||0x3000000000000000||0x5000000000000000||0x6000000000000000||0x7000000000000000))) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" newline newline hexmask.quad.long 0x00 12.--39. 0x10 "PA[39:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif (((per.q(spr:0x30740))&0x01)==0x00) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" newline bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "---,Inner Write-Through Transient W,Inner Write-Through Transient R,Inner Write-Through Transient RW,Inner Non-cacheable,Inner Write-Back Transient R,Inner Write-Back Transient W,Inner Write-Back Transient RW,Inner Write-Through Non-transient,Inner Write-Through Non-transient W,Inner Write-Through Non-transient R,Inner Write-Through Non-transient RW,Inner Write-Back Non-transient,Inner Write-Back Non-transient W,Inner Write-Back Non-transient R,Inner Write-Back Non-transient RW" newline hexmask.quad.long 0x00 12.--39. 0x10 "PA[39:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" else group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 9. "S,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2" bitfld.quad 0x00 8. "PTW,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes" newline bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Address size fault/zeroth level/TTBR,Address size fault/first level,Address size fault/second level,Address size fault/third level,Translation fault/zeroth level,Translation fault/first level,Translation fault/second level,Translation fault/third level,Reserved,Access flag fault/first level,Access flag fault/second level,Access flag fault/third level,Reserved,Permission fault/first level,Permission fault/second level,Permission fault/third level,Synchronous external abort/not TTBR,Reserved,Reserved,Reserved,Synchronous external abort/TTBR/zeroth level,Synchronous external abort/TTBR/first level,Synchronous external abort/TTBR/second level,Synchronous external abort/TTBR/third level,Synchronous parity/ECC error/not TTBR,Reserved,Reserved,Reserved,Synchronous parity/ECC error/TTBR/zeroth level,Synchronous parity/ECC error/TTBR/first level,Synchronous parity/ECC error/TTBR/second level,Synchronous parity/ECC error/TTBR/third level,Reserved,Alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain fault,Page Domain fault,Reserved" newline newline newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" endif endif newline tree.open "Memory Attribute Indirection Registers" if (CORENAME()=="CORTEXA75") group.quad spr:0x30A20++0x00 line.quad 0x00 "MAIR_EL1,Memory Attribute Indirection Register (EL1)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.quad spr:0x35A20++0x00 line.quad 0x00 "MAIR_EL12,Memory Attribute Indirection Register (EL12)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.quad spr:0x34A20++0x00 line.quad 0x00 "MAIR_EL2,Memory Attribute Indirection Register (EL2)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.quad spr:0x36A20++0x00 line.quad 0x00 "MAIR_EL3,Memory Attribute Indirection Register (EL3)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" elif (CORENAME()=="CORTEXA55") group.quad spr:0x30A20++0x00 line.quad 0x00 "MAIR_EL1,Memory Attribute Indirection Register (EL1)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.quad spr:0x35A20++0x00 line.quad 0x00 "MAIR_EL12,Memory Attribute Indirection Register (EL12)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.quad spr:0x34A20++0x00 line.quad 0x00 "MAIR_EL2,Memory Attribute Indirection Register (EL2)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.quad spr:0x36A20++0x00 line.quad 0x00 "MAIR_EL3,Memory Attribute Indirection Register (EL3)" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" endif group.quad spr:0x30A30++0x00 line.quad 0x00 "AMAIR_EL1,Auxiliary Memory Attribute Indirection Register" group.quad spr:0x35A30++0x00 line.quad 0x00 "AMAIR_EL12,Auxiliary Memory Attribute Indirection Register" group.quad spr:0x34A30++0x00 line.quad 0x00 "AMAIR_EL2,Auxiliary Memory Attribute Indirection Register" group.quad spr:0x36A30++0x00 line.quad 0x00 "AMAIR_EL3,Auxiliary Memory Attribute Indirection Register" tree.end newline group.quad spr:0x34300++0x00 line.quad 0x00 "DACR32_EL2,Domain Access Control Register" bitfld.quad 0x00 30.--31. "D15,Domain 15 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 28.--29. "D14,Domain 14 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 26.--27. "D13,Domain 13 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 24.--25. "D12,Domain 12 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 22.--23. "D11,Domain 11 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 20.--21. "D10,Domain 10 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 18.--19. "D9,Domain 9 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 16.--17. "D8,Domain 8 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 14.--15. "D7,Domain 7 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 12.--13. "D6,Domain 6 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 10.--11. "D5,Domain 5 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 8.--9. "D4,Domain 4 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 6.--7. "D3,Domain 3 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 4.--5. "D2,Domain 2 access permission" "No access,Client,Reserved,Manager" newline bitfld.quad 0x00 2.--3. "D1,Domain 1 access permission" "No access,Client,Reserved,Manager" bitfld.quad 0x00 0.--1. "D0,Domain 0 access permission" "No access,Client,Reserved,Manager" tree.end tree "Virtualization Extensions" group.quad spr:0x34111++0x00 line.quad 0x00 "MDCR_EL2,Monitor Debug Configuration Register" bitfld.quad 0x00 17. "HPMD,Hypervisor performance monitors disable" "No,Yes" newline bitfld.quad 0x00 14. "TPMS,Trap Performance Monitor Sampling" "No trap,Trap" newline bitfld.quad 0x00 11. "TDRA,Trap valid EL1 and EL0 access to debug ROM address registers to EL2" "No trap,Trap" bitfld.quad 0x00 10. "TDOSA,Trap valid accesses to OS-related debug registers to EL2" "No trap,Trap" bitfld.quad 0x00 9. "TDA,Trap valid Non-secure accesses to Debug registers to EL2" "No trap,Trap" newline bitfld.quad 0x00 8. "TDE,Route debug exceptions from Non-secure EL1 and EL0 to EL2" "Disabled,Enabled" bitfld.quad 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled" bitfld.quad 0x00 6. "TPM,Trap Non-secure EL0 and EL1 accesses to Performance Monitors registers that are not UNALLOCATED to EL2" "No trap,Trap" newline bitfld.quad 0x00 5. "TPMCR,Trap Non-secure EL0 and EL1 accesses to PMCR_EL0 to EL2" "No trap,Trap" bitfld.quad 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters accessible from non-secure EL0/EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.quad spr:0x36131++0x00 line.quad 0x00 "MDCR_EL3,Monitor Debug Configuration Register" bitfld.quad 0x00 21. "EPMAD,External debugger to Performance Monitor registers access disable" "No,Yes" bitfld.quad 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint registers disabled" "No,Yes" bitfld.quad 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled" newline bitfld.quad 0x00 16. "SDD,Secure self-hosted invasive debug disable" "No,Yes" newline bitfld.quad 0x00 14.--15. "SPD32,AArch32 secure privileged debug" "Legacy mode,Reserved,Disabled,Enabled" bitfld.quad 0x00 10. "TDOSA,Trap valid accesses to OS-related debug registers to EL3" "No trap,Trap" bitfld.quad 0x00 9. "TDA,Trap valid Non-secure accesses to Debug registers to EL3" "No trap,Trap" newline bitfld.quad 0x00 6. "TPM,Trap Non-secure EL0/EL1/EL2 accesses to Performance Monitors registers that are not UNALLOCATED or trapped to a lower exception level to EL3" "No trap,Trap" rgroup.quad spr:0x30012++0x00 line.quad 0x00 "ID_DFR0_EL1,Debug Feature Register" bitfld.quad 0x00 24.--27. "PERFMON,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Reserved,Supported/16-bit evtCount,?..." bitfld.quad 0x00 20.--23. "MPROFDBG,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..." bitfld.quad 0x00 16.--19. "MMAPTRC,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 12.--15. "COPTRC,Coprocessor-Based Trace Debug Model Support" "Not supported,?..." bitfld.quad 0x00 4.--7. "COPSDBG,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Support v8.2,?..." bitfld.quad 0x00 0.--3. "COPDBG,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Support v8.2,?..." tree.end tree "Cache Control and Configuration" rgroup.quad spr:0x30F00++0x00 line.quad 0x00 "CPUCFR_EL1, CPU Configuration Register (EL1)" bitfld.quad 0x00 2. "SCU,Indicates whether the SCU is present or not" "Present,?..." bitfld.quad 0x00 0.--1. "ECC,Indicates whether ECC is present or not" "Not present,Present,?..." if (CORENAME()=="CORTEXA75") group.quad spr:0x30F27++0x00 line.quad 0x00 "CPUPWRCTLR_EL1,Power Control Register (EL1)" bitfld.quad 0x00 7.--9. "WFE_RET_CTRL,CPU WFE retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" bitfld.quad 0x00 4.--6. "WFI_RET_CTRL,CPU WFI retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" bitfld.quad 0x00 0. "CORE_PWRDN_EN,Indicates to the power controller if the CPU wants to power down when it enters WFI state" "Not requested,Requested" elif (CORENAME()=="CORTEXA55") group.quad spr:0x30F27++0x00 line.quad 0x00 "CPUPWRCTLR_EL1,Power Control Register (EL1)" bitfld.quad 0x00 10.--12. "SIMD_RET_CTRL,Advanced SIMD and floating-point retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" bitfld.quad 0x00 7.--9. "WFE_RET_CTRL,CPU WFE retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" bitfld.quad 0x00 4.--6. "WFI_RET_CTRL,CPU WFI retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" newline bitfld.quad 0x00 0. "CORE_PWRDN_EN,Indicates to the power controller if the CPU wants to power down when it enters WFI state" "Not requested,Requested" endif rgroup.quad spr:0x33001++0x00 line.quad 0x00 "CTR_EL0,Cache Type Register" bitfld.quad 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.quad 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.quad 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.quad 0x0 14.--15. "L1IP,Instruction cache policy" "Reserved,Reserved,VIPT,?..." bitfld.quad 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." if (((per.q(spr:0x32000))&0xE)==(0x02||0x04)) group.quad spr:0x32000++0x00 line.quad 0x00 "CSSELR_EL1,Cache Size Selection Register" bitfld.quad 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,Level 3,?..." bitfld.quad 0x00 0. "IND,Instruction/Not Data" "Data/Unified,?..." else group.quad spr:0x32000++0x00 line.quad 0x00 "CSSELR_EL1,Cache Size Selection Register" bitfld.quad 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,Level 3,?..." bitfld.quad 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction" endif rgroup.quad spr:0x31000++0x00 line.quad 0x00 "CCSIDR_EL1,Cache Size and ID register" bitfld.quad 0x00 31. "WT,Indicates whether the selected cache level supports Write-Through" "Not Supported,?..." bitfld.quad 0x00 30. "WB,Indicates whether the selected cache level supports Write-Back" "Not Supported,Supported" bitfld.quad 0x00 29. "RA,Indicates whether the selected cache level supports read-allocation" "Not Supported,Supported" newline bitfld.quad 0x00 28. "WA,Indicates whether the selected cache level supports write-allocation" "Not Supported,Supported" hexmask.quad.word 0x00 13.--27. 1. 1. "NUMSETS,Number of Sets" hexmask.quad.word 0x00 3.--12. 1. 1. "ASSOCIATIVITY,Associativity" newline bitfld.quad 0x00 0.--2. "LINESIZE,Line Size" "Reserved,Reserved,64 bytes,?..." if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x31001++0x00 line.quad 0x00 "CLIDR_EL1,Cache Level ID register" bitfld.quad 0x00 30.--32. "ICB,Inner cache boundary" "Reserved,Reserved,L2 highest,L3 highest,?..." bitfld.quad 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Not required,?..." bitfld.quad 0x00 24.--26. "LOC,Level of Coherency" "Reserved,Reserved,No L3 cache,L3 cache,?..." newline bitfld.quad 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "No cache,?..." bitfld.quad 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,Reserved,Reserved,Reserved,Unified,?..." bitfld.quad 0x00 3.--5. "CTYPE2,Cache type for levels 2" "Reserved,Reserved,Reserved,Reserved,Unified,?..." newline bitfld.quad 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate,?..." elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x31001++0x00 line.quad 0x00 "CLIDR_EL1,Cache Level ID register" bitfld.quad 0x00 30.--32. "ICB,Inner cache boundary" "Reserved,L1 highest,L2 highest,L3 highest,?..." bitfld.quad 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Not required,?..." bitfld.quad 0x00 24.--26. "LOC,Level of Coherency" "Reserved,No cache,L2 or L3 cache,L2 and L3 cache,?..." newline bitfld.quad 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Not required,?..." bitfld.quad 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,Reserved,Reserved,Reserved,L2 and L3 cache,?..." bitfld.quad 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,Reserved,Reserved,Reserved,Unified,?..." newline bitfld.quad 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate,?..." endif tree "Level 1 memory system" rgroup.quad spr:0x36F00++0x00 line.quad 0x00 "CDBGDR0_EL3,Data Register 0" rgroup.quad spr:0x36F01++0x00 line.quad 0x00 "CDBGDR1_EL3,Data Register 1" rgroup.quad spr:0x36F02++0x00 line.quad 0x00 "CDBGDR2_EL3,Data Register 2" wgroup.quad spr:0x16F20++0x00 line.quad 0x00 "CDBGDCT_EL3,Data Cache Tag Read Operation Register" wgroup.quad spr:0x16F21++0x00 line.quad 0x00 "CDBGICT_EL3,Instruction Cache Tag Read Operation Register" wgroup.quad spr:0x16F22++0x00 line.quad 0x00 "CDBGTT_EL3,TLB Tag Read Operation Register" wgroup.quad spr:0x16F40++0x00 line.quad 0x00 "CDBGDCD_EL3,Data Cache Data Read Operation Register" wgroup.quad spr:0x16F41++0x00 line.quad 0x00 "CDBGICD_EL3,Instruction Cache Data Read Operation Register" wgroup.quad spr:0x16F42++0x00 line.quad 0x00 "CDBGTD_EL3,TLB Data Read Operation Register" tree.end tree.end tree "System Performance Monitor" group.quad spr:0x339C0++0x00 line.quad 0x00 "PMCR_EL0,Performance Monitors Control Register" hexmask.quad.byte 0x00 24.--31. 1. "IMP,Implementer code" hexmask.quad.byte 0x00 16.--23. 1. "IDCODE,Identification code" bitfld.quad 0x00 11.--15. "N,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 6. "LC,Long cycle counter enable" "Disabled,Enabled" newline bitfld.quad 0x00 5. "DP,Disable CCNT when event counting prohibited" "No,Yes" bitfld.quad 0x00 4. "X,Export of events Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "D,Clock Divider" "Every cycle,64th cycle" bitfld.quad 0x00 2. "C,Clock Counter Reset" "No reset,Reset" newline bitfld.quad 0x00 1. "P,Performance Counter Reset" "No reset,Reset" bitfld.quad 0x00 0. "E,All Counters Enable" "Disabled,Enabled" group.quad spr:0x339C1++0x00 line.quad 0x00 "PMCNTENSET_EL0,Count Enable Set register" bitfld.quad 0x00 31. "C,Enables the cycle counter register" "Disabled,Enabled" newline bitfld.quad 0x00 5. "P5,Event counter PMN 5 enable bit" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,Event counter PMN 4 enable bit" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,Event counter PMN 3 enable bit" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,Event counter PMN 2 enable bit" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,Event counter PMN 1 enable bit" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,Event counter PMN 0 enable bit" "Disabled,Enabled" group.quad spr:0x339C2++0x00 line.quad 0x00 "PMCNTENCLR_EL0,Count Enable Clear register" bitfld.quad 0x00 31. "C,Disables the cycle counter register" "Disabled,Enabled" newline bitfld.quad 0x00 5. "P5,PMN5 overflow" "No overflow,Overflow" bitfld.quad 0x00 4. "P4,PMN4 overflow" "No overflow,Overflow" bitfld.quad 0x00 3. "P3,PMN3 overflow" "No overflow,Overflow" newline bitfld.quad 0x00 2. "P2,PMN2 overflow" "No overflow,Overflow" bitfld.quad 0x00 1. "P1,PMN1 overflow" "No overflow,Overflow" bitfld.quad 0x00 0. "P0,PMN0 overflow" "No overflow,Overflow" group.quad spr:0x339C3++0x00 line.quad 0x00 "PMOVSCLR_EL0,Overflow Status Flags Clear register" eventfld.quad 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow" newline eventfld.quad 0x00 5. "P5,PMN5 overflow" "No overflow,Overflow" eventfld.quad 0x00 4. "P4,PMN4 overflow" "No overflow,Overflow" eventfld.quad 0x00 3. "P3,PMN3 overflow" "No overflow,Overflow" newline eventfld.quad 0x00 2. "P2,PMN2 overflow" "No overflow,Overflow" eventfld.quad 0x00 1. "P1,PMN1 overflow" "No overflow,Overflow" eventfld.quad 0x00 0. "P0,PMN0 overflow" "No overflow,Overflow" wgroup.quad spr:0x339C4++0x00 line.quad 0x00 "PMSWINC_EL0,Software Increment register" bitfld.quad 0x00 5. "P5,PMN5 software increment" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,PMN4 software increment" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,PMN3 software increment" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,PMN2 software increment" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,PMN1 software increment" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,PMN0 software increment" "Disabled,Enabled" group.quad spr:0x339C5++0x00 line.quad 0x00 "PMSELR_EL0,Event Counter Selection Register" bitfld.quad 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline tree.open "Common Event Identification Registers" rgroup.quad spr:0x339C6++0x00 line.quad 0x00 "PMCEID0_EL0,Common Event Identification register" bitfld.quad 0x00 31. "L1D_CACHE_ALLOCATE,Level 1 data cache allocate" "Not implemented,Implemented" bitfld.quad 0x00 30. "CHAIN,Chain" "Not implemented,Implemented" bitfld.quad 0x00 29. "BUS_CYCLES,Bus cycle" "Not implemented,Implemented" newline bitfld.quad 0x00 28. "TTBR_WRITE_RETIRED,TTBR write retired" "Not implemented,Implemented" bitfld.quad 0x00 27. "INST_SPEC,Instruction speculatively executed" "Not implemented,Implemented" bitfld.quad 0x00 26. "MEMORY_ERROR,Local memory error" "Not implemented,Implemented" newline bitfld.quad 0x00 25. "BUS_ACCESS,Bus access" "Not implemented,Implemented" bitfld.quad 0x00 24. "L2D_CACHE_WB,Level 2 data cache write-back" "Not implemented,Implemented" bitfld.quad 0x00 23. "L2D_CACHE_REFILL,Level 2 data cache refill" "Not implemented,Implemented" newline bitfld.quad 0x00 22. "L2D_CACHE,Level 2 data cache access" "Not implemented,Implemented" bitfld.quad 0x00 21. "L1D_CACHE_WB,Level 1 data cache write-back" "Not implemented,Implemented" bitfld.quad 0x00 20. "L1I_CACHE,Level 1 instruction cache access" "Not implemented,Implemented" newline bitfld.quad 0x00 19. "MEM_ACCESS,Data memory access" "Not implemented,Implemented" bitfld.quad 0x00 18. "BR_PRED,Predictable branch speculatively executed" "Not implemented,Implemented" bitfld.quad 0x00 17. "CPU_CYCLES,CPU Cycle" "Not implemented,Implemented" newline bitfld.quad 0x00 16. "BR_MIS_PRED,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented" bitfld.quad 0x00 15. "UNALIGNED_LDST_RETIRED,UNALIGNED_LDST_RETIRED" "Not implemented,Implemented" bitfld.quad 0x00 14. "BR_RETURN_RETIRED,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented" newline bitfld.quad 0x00 13. "BR_IMMED_RETIRED,Instruction architecturally executed immediate branch" "Not implemented,Implemented" bitfld.quad 0x00 12. "PC_WRITE_RETIRED,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented" bitfld.quad 0x00 11. "CID_WRITE_RETIRED,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented" newline bitfld.quad 0x00 10. "EXC_RETURN,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented" bitfld.quad 0x00 9. "EXC_TAKEN,Exception taken" "Not implemented,Implemented" bitfld.quad 0x00 8. "INST_RETIRED,Instruction architecturally executed" "Not implemented,Implemented" newline bitfld.quad 0x00 7. "ST_RETIRED,Instruction architecturally executed condition check pass store" "Not implemented,Implemented" bitfld.quad 0x00 6. "LD_RETIRED,Instruction architecturally executed condition check pass load" "Not implemented,Implemented" bitfld.quad 0x00 5. "L1D_TLB_REFILL,Level 1 data TLB refill" "Not implemented,Implemented" newline bitfld.quad 0x00 4. "L1D_CACHE,Level 1 data cache access" "Not implemented,Implemented" bitfld.quad 0x00 3. "L1D_CACHE_REFILL,Level 1 data cache refill" "Not implemented,Implemented" bitfld.quad 0x00 2. "L1I_TLB_REFILL,Level 1 instruction TLB refill" "Not implemented,Implemented" newline bitfld.quad 0x00 1. "L1I_CACHE_REFILL,Level 1 instruction cache refill" "Not implemented,Implemented" bitfld.quad 0x00 0. "SW_INCR,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented" if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x339C7++0x00 line.quad 0x00 "PMCEID1_EL0,Common Event Identification register" bitfld.quad 0x00 24. "REMOTE_ACCESS,Access to another socket in a multi-socket system" "Not implemented,Implemented" bitfld.quad 0x00 23. "LL_CACHE_MISS_RD,Last Level cache miss read" "Not implemented,Implemented" bitfld.quad 0x00 22. "LL_CACHE_RD,Last Level cache access read" "Not implemented,Implemented" newline bitfld.quad 0x00 21. "ITLB_WALK,Access to instruction TLB that caused a page table walk" "Not implemented,Implemented" bitfld.quad 0x00 20. "DTLB_WALK,Access to data TLB that caused a page table walk" "Not implemented,Implemented" bitfld.quad 0x00 16. "L2I_TLB,Attributable Level 2 instruction TLB access" "Not implemented,Implemented" newline bitfld.quad 0x00 15. "L2D_TLB,Attributable Level 2 data or unified TLB access" "Not implemented,Implemented" bitfld.quad 0x00 13. "L2D_TLB_REFILL,Attributable Level 2 data or unified TLB refill" "Not implemented,Implemented" bitfld.quad 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Not implemented,Implemented" newline bitfld.quad 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Not implemented,Implemented" bitfld.quad 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Not implemented,Implemented" bitfld.quad 0x00 6. "L1I_TLB,Level 1 instruction TLB access" "Not implemented,Implemented" newline bitfld.quad 0x00 5. "L1D_TLB,Level 1 data or unified TLB access" "Not implemented,Implemented" bitfld.quad 0x00 4. "STALL_BACKEND,No operation issued due to backend" "Not implemented,Implemented" bitfld.quad 0x00 3. "STALL_FRONTEND,No operation issued due to the frontend" "Not implemented,Implemented" newline bitfld.quad 0x00 1. "BR_RETIRED,Instruction architecturally executed branch" "Not implemented,Implemented" bitfld.quad 0x00 0. "L2D_CACHE_ALLOCATE,Level 2 data cache allocate" "Not implemented,Implemented" elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x339C7++0x00 line.quad 0x00 "PMCEID1_EL0,Common Event Identification register" bitfld.quad 0x00 23. "LL_CACHE_MISS_RD,Last Level cache miss read" "Not implemented,Implemented" bitfld.quad 0x00 22. "LL_CACHE_RD,Last Level cache access read" "Not implemented,Implemented" bitfld.quad 0x00 21. "ITLB_WALK,Access to instruction TLB that caused a page table walk" "Not implemented,Implemented" newline bitfld.quad 0x00 20. "DTLB_WALK,Access to data TLB that caused a page table walk" "Not implemented,Implemented" bitfld.quad 0x00 17. "REMOTE_ACCESS,Access to another socket in a multi-socket system" "Not implemented,Implemented" bitfld.quad 0x00 16. "L2I_TLB,Attributable Level 2 instruction TLB access" "Not implemented,Implemented" newline bitfld.quad 0x00 15. "L2D_TLB,Attributable Level 2 data or unified TLB access" "Not implemented,Implemented" bitfld.quad 0x00 14. "L2I_TLB_REFILL,Attributable Level 2 instruction TLB refill" "Not implemented,Implemented" bitfld.quad 0x00 13. "L2D_TLB_REFILL,Attributable Level 2 data or unified TLB refill" "Not implemented,Implemented" newline bitfld.quad 0x00 12. "L3D_CACHE_WB,Attributable Level 3 data or unified cache write-back" "Not implemented,Implemented" bitfld.quad 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Not implemented,Implemented" bitfld.quad 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Not implemented,Implemented" newline bitfld.quad 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Not implemented,Implemented" bitfld.quad 0x00 8. "L2I_CACHE_REFILL,Attributable Level 2 instruction cache refill" "Not implemented,Implemented" bitfld.quad 0x00 7. "L2I_CACHE,Attributable Level 2 instruction cache access" "Not implemented,Implemented" newline bitfld.quad 0x00 6. "L1I_TLB,Level 1 instruction TLB access" "Not implemented,Implemented" bitfld.quad 0x00 5. "L1D_TLB,Level 1 data or unified TLB access" "Not implemented,Implemented" bitfld.quad 0x00 4. "STALL_BACKEND,No operation issued due to backend" "Not implemented,Implemented" newline bitfld.quad 0x00 3. "STALL_FRONTEND,No operation issued due to the frontend" "Not implemented,Implemented" bitfld.quad 0x00 2. "BR_MIS_PRED_RETIRED,Instruction architecturally executed mispredicted branch" "Not implemented,Implemented" bitfld.quad 0x00 1. "BR_RETIRED,Instruction architecturally executed branch" "Not implemented,Implemented" newline bitfld.quad 0x00 0. "L2D_CACHE_ALLOCATE,Level 2 data cache allocate" "Not implemented,Implemented" endif tree.end newline group.quad spr:0x339D0++0x00 line.quad 0x00 "PMCCNTR_EL0,Performance Monitors Cycle Counter" group.quad spr:0x339D1++0x00 line.quad 0x00 "PMXEVTYPER_EL0,Performance Monitors Selected Event Type Register" group.quad spr:0x339D2++0x00 line.quad 0x00 "PMXEVCNTR_EL0,Selected Event Counter Register" group.quad spr:0x339E0++0x00 line.quad 0x00 "PMUSERENR_EL0,User Enable Register" bitfld.quad 0x00 3. "ER,Event counter read enable" "Disabled,Enabled" bitfld.quad 0x00 2. "CR,Cycle counter read enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled" bitfld.quad 0x00 0. "EN,EL0 access enable bit" "Disabled,Enabled" group.quad spr:0x309E1++0x00 line.quad 0x00 "PMINTENSET_EL1,Interrupt Enable Set register" bitfld.quad 0x00 31. "C,CCNT Overflow Interrupt Request Enable" "Disabled,Enabled" newline bitfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.quad spr:0x309E2++0x00 line.quad 0x00 "PMINTENCLR_EL1,Interrupt Enable Clear register" eventfld.quad 0x00 31. "C,CCNT Overflow Interrupt Request Enable" "Disabled,Enabled" newline eventfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" newline eventfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.quad spr:0x339E3++0x00 line.quad 0x00 "PMOVSSET_EL0,Overflow Status Flags Set register" bitfld.quad 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow" newline bitfld.quad 0x00 5. "P5,PMN5 Overflow" "No overflow,Overflow" bitfld.quad 0x00 4. "P4,PMN4 Overflow" "No overflow,Overflow" bitfld.quad 0x00 3. "P3,PMN3 Overflow" "No overflow,Overflow" newline bitfld.quad 0x00 2. "P2,PMN2 Overflow" "No overflow,Overflow" bitfld.quad 0x00 1. "P1,PMN1 Overflow" "No overflow,Overflow" bitfld.quad 0x00 0. "P0,PMN0 Overflow" "No overflow,Overflow" group.quad spr:(0x33E80+0x0)++0x00 line.quad 0x00 "PMEVCNTR0_EL0,Event Counter Register" group.quad spr:(0x33E80+0x1)++0x00 line.quad 0x00 "PMEVCNTR1_EL0,Event Counter Register" group.quad spr:(0x33E80+0x2)++0x00 line.quad 0x00 "PMEVCNTR2_EL0,Event Counter Register" group.quad spr:(0x33E80+0x3)++0x00 line.quad 0x00 "PMEVCNTR3_EL0,Event Counter Register" group.quad spr:(0x33E80+0x4)++0x00 line.quad 0x00 "PMEVCNTR4_EL0,Event Counter Register" group.quad spr:(0x33E80+0x5)++0x00 line.quad 0x00 "PMEVCNTR5_EL0,Event Counter Register" group.quad spr:(0x33EC0+0x0)++0x00 line.quad 0x00 "PMEVTYPER0_EL0,Event Counter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" group.quad spr:(0x33EC0+0x1)++0x00 line.quad 0x00 "PMEVTYPER1_EL0,Event Counter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" group.quad spr:(0x33EC0+0x2)++0x00 line.quad 0x00 "PMEVTYPER2_EL0,Event Counter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" group.quad spr:(0x33EC0+0x3)++0x00 line.quad 0x00 "PMEVTYPER3_EL0,Event Counter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" group.quad spr:(0x33EC0+0x4)++0x00 line.quad 0x00 "PMEVTYPER4_EL0,Event Counter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" group.quad spr:(0x33EC0+0x5)++0x00 line.quad 0x00 "PMEVTYPER5_EL0,Event Counter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" group.quad spr:0x33EF7++0x00 line.quad 0x00 "PMCCFILTR_EL0,Event Type and Cycle Counter Filter Register" bitfld.quad 0x00 31. "P,Count events in EL1" "Disabled,Enabled" bitfld.quad 0x00 30. "U,Count events in EL0" "Disabled,Enabled" bitfld.quad 0x00 29. "NSK,Count events in non-secure EL1" "Disabled,Enabled" newline bitfld.quad 0x00 28. "NSU,Count events in non-secure EL0" "Disabled,Enabled" bitfld.quad 0x00 27. "NSH,Count events in non-secure EL2" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Count events in secure EL3" "Disabled,Enabled" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" tree.end tree "System Timer Registers" group.quad spr:0x33E00++0x00 line.quad 0x00 "CNTFRQ_EL0,Counter-timer Frequency register" rgroup.quad spr:0x33E01++0x00 line.quad 0x00 "CNTPCT_EL0,Counter-timer Physical Count register" rgroup.quad spr:0x33E02++0x00 line.quad 0x00 "CNTVCT_EL0,Counter-timer Virtual Count register" group.quad spr:0x34E03++0x00 line.quad 0x00 "CNTVOFF_EL2,Counter-timer Virtual Offset register" if (((per.q(spr:0x34110))&0x408000000)==0x408000000) group.quad spr:0x30E10++0x00 line.quad 0x00 "CNTKCTL_EL1,Counter-timer Kernel Control register" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from that counter, when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the corresponding counter" "Disabled,Enabled" else group.quad spr:0x30E10++0x00 line.quad 0x00 "CNTKCTL_EL1,Counter-timer Kernel Control register" bitfld.quad 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from that counter, when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" newline bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the corresponding counter" "Disabled,Enabled" bitfld.quad 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled" endif if (((per.q(spr:0x34110))&0x408000000)==0x408000000) group.quad spr:0x35E10++0x00 line.quad 0x00 "CNTKCTL_EL12,Counter-timer Kernel Control register" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from that counter, when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the corresponding counter" "Disabled,Enabled" else group.quad spr:0x35E10++0x00 line.quad 0x00 "CNTKCTL_EL12,Counter-timer Kernel Control register" bitfld.quad 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from that counter, when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" newline bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the corresponding counter" "Disabled,Enabled" bitfld.quad 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled" endif if (((per.q(spr:0x34110))&0x400000000)==0x000000000) group.quad spr:0x34E10++0x00 line.quad 0x00 "CNTHCTL_EL2,Counter-timer Hypervisor Control register" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTPCT is the trigger for the event stream generated from the physical counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the physical counter" "Disabled,Enabled" bitfld.quad 0x00 1. "EL1PCEN,Controls whether the physical timer registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" newline bitfld.quad 0x00 0. "EL1PCTEN,Controls whether the physical counter, CNTPCT, is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" elif (((per.q(spr:0x34110))&0x408000000)==0x400000000) group.quad spr:0x34E10++0x00 line.quad 0x00 "CNTHCTL_EL2,Counter-timer Hypervisor Control register" bitfld.quad 0x00 11. "EL1PTEN,Physical timer register accessing instructions are accessible from Non-secure EL1 and EL0" "Not accessible,Accessible" bitfld.quad 0x00 10. "EL1PCEN,Physical counter is accessible from Non-secure EL1 and EL0" "Not accessible,Accessible" newline bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTPCT is the trigger for the event stream generated from the physical counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the physical counter" "Disabled,Enabled" else group.quad spr:0x34E10++0x00 line.quad 0x00 "CNTHCTL_EL2,Counter-timer Hypervisor Control register" bitfld.quad 0x00 9. "EL0PTEN,Physical timer register accessing instructions are accessible from Non-secure EL0" "Not accessible,Accessible" bitfld.quad 0x00 8. "EL0VTEN,Virtual timer register accessing instructions are accessible from Non-secure EL0" "Not accessible,Accessible" newline bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTPCT is the trigger for the event stream generated from the physical counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI, generates an event when the event stream is enabled" "0 to 1,1 to 0" bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the physical counter" "Disabled,Enabled" bitfld.quad 0x00 1. "EL0VCTEN,Virtual counter register accessing instructions are accessible from Non-secure EL0" "Not accessible,Accessible" newline bitfld.quad 0x00 0. "EL0PCTEN,Physical counter is accessible from Non-secure EL0 modes" "Not accessible,Accessible" endif group.quad spr:0x33E20++0x00 line.quad 0x00 "CNTP_TVAL_EL0,Counter-timer Physical Timer TimerValue register" group.quad spr:0x35E20++0x00 line.quad 0x00 "CNTP_TVAL_EL02,Counter-timer Physical Timer TimerValue register" group.quad spr:0x33E21++0x00 line.quad 0x00 "CNTP_CTL_EL0,Counter-timer Physical Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x35E21++0x00 line.quad 0x00 "CNTP_CTL_EL02,Counter-timer Physical Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x33E22++0x00 line.quad 0x00 "CNTP_CVAL_EL0,Counter-timer Physical Timer CompareValue register" group.quad spr:0x35E22++0x00 line.quad 0x00 "CNTP_CVAL_EL02,Counter-timer Physical Timer CompareValue register" group.quad spr:0x33E30++0x00 line.quad 0x00 "CNTV_TVAL_EL0,Counter-timer Virtual Timer TimerValue register" group.quad spr:0x35E30++0x00 line.quad 0x00 "CNTV_TVAL_EL02,Counter-timer Virtual Timer TimerValue register" group.quad spr:0x33E31++0x00 line.quad 0x00 "CNTV_CTL_EL0,Counter-timer Virtual Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x35E31++0x00 line.quad 0x00 "CNTV_CTL_EL02,Counter-timer Virtual Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x33E32++0x00 line.quad 0x00 "CNTV_CVAL_EL0,Counter-timer Virtual Timer CompareValue register" group.quad spr:0x35E32++0x00 line.quad 0x00 "CNTV_CVAL_EL02,Counter-timer Virtual Timer CompareValue register" group.quad spr:0x34E20++0x00 line.quad 0x00 "CNTHP_TVAL_EL2,Counter-timer Hypervisor Physical Timer TimerValue register" group.quad spr:0x34E21++0x00 line.quad 0x00 "CNTHP_CTL_EL2,Counter-timer Hypervisor Physical Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x34E22++0x00 line.quad 0x00 "CNTHP_CVAL_EL2,Counter-timer Hypervisor Physical Timer CompareValue register" group.quad spr:0x34E30++0x00 line.quad 0x00 "CNTHV_TVAL_EL2,Counter-timer Hypervisor Virtual Timer Value register" group.quad spr:0x34E31++0x00 line.quad 0x00 "CNTHV_CTL_EL2,Counter-timer Hypervisor Virtual Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x34E32++0x00 line.quad 0x00 "CNTHV_CVAL_EL2,Counter-timer Hypervisor Virtual Timer CompareValue register" group.quad spr:0x37E20++0x00 line.quad 0x00 "CNTPS_TVAL_EL1,Counter-timer Physical Secure Timer TimerValue register" group.quad spr:0x37E21++0x00 line.quad 0x00 "CNTPS_CTL_EL1,Counter-timer Physical Secure Timer Control register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x37E22++0x00 line.quad 0x00 "CNTPS_CVAL_EL1,Counter-timer Physical Secure Timer CompareValue register" tree.end tree "Generic Interrupt Controller System Registers" tree "AArch64 Physical GIC CPU Interface System Registers" tree "Active Priorities Registers" group.quad spr:0x30C84++0x00 line.quad 0x00 "ICC_AP0R0_EL1,Active Priorities 0 Register 0" bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.quad spr:0x30C90++0x00 line.quad 0x00 "ICC_AP1R0_EL1,Active Priorities 1 Register 0" bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline if (((per.q(spr:0x30CB6))&0x10000000000)==0x00) wgroup.quad spr:0x30CB6++0x00 line.quad 0x00 "ICC_ASGI1R_EL1,Interrupt Controller Alias Software Generated Interrupt Group 1 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated" else wgroup.quad spr:0x30CB6++0x00 line.quad 0x00 "ICC_ASGI1R_EL1,Interrupt Controller Alias Software Generated Interrupt Group 1 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.quad spr:0x30C83++0x00 line.quad 0x00 "ICC_BPR0_EL1,Binary Point Register 0" bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" "Reserved,Reserved,[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.quad spr:0x30CC3++0x00 line.quad 0x00 "ICC_BPR1_EL1,Binary Point Register 1" bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" "Reserved,Reserved,[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" group.quad spr:0x30CC4++0x00 line.quad 0x00 "ICC_CTLR_EL1,Interrupt Control Registers for EL1" rbitfld.quad 0x00 19. "EXTRANGE,Extended INTID range" "Reserved,Supported" rbitfld.quad 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Valid" rbitfld.quad 0x00 14. "SEIS,SEI Support" "Not supported," bitfld.quad 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,?..." rbitfld.quad 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..." newline bitfld.quad 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" bitfld.quad 0x00 1. "EOIMODE,Indicates whether ICC_EOIR0 and ICC_EOIR1 provide both priority drop and interrupt deactivation functionality" "Both,Priority drop" bitfld.quad 0x00 0. "CBPR,Common Binary Point Register" "Separate,Common" group.quad spr:0x36CC4++0x00 line.quad 0x00 "ICC_CTLR_EL3,Interrupt Control Registers for EL3" rbitfld.quad 0x00 19. "EXTRANGE,Extended INTID range" "Reserved,Supported" rbitfld.quad 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.quad 0x00 17. "NDS,Disable Security not supported" "Reserved,Not supported" rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Valid" rbitfld.quad 0x00 14. "SEIS,SEI Support" "Not supported," newline bitfld.quad 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,?..." rbitfld.quad 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..." bitfld.quad 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" newline rbitfld.quad 0x00 5. "RM,Routing Modifier" "Normal," bitfld.quad 0x00 4. "EOIMODE_EL1NS,EOI mode for interrupts handledat non-secure EL1 and EL2" "0,1" bitfld.quad 0x00 3. "EOIMODE_EL1S,EOI mode for interrupts handled at secure EL1" "0,1" newline bitfld.quad 0x00 2. "EOIMODE_EL3,EOI mode for interrupts handled at EL3" "0,1" bitfld.quad 0x00 1. "CBPR_EL1NS,Non-secure accesses to GICC_BPR allowed." "Not allowed,Allowed" bitfld.quad 0x00 0. "CBPR_EL1S,Secure EL1 accesses to ICC_BPR1 allowed" "Not allowed,Allowed" wgroup.quad spr:0x30CB1++0x00 line.quad 0x00 "ICC_DIR_EL1,Deactivate Interrupt Register" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.quad spr:0x30C81++0x00 line.quad 0x00 "ICC_EOIR0_EL1,End Of Interrupt Register 0" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0_EL1 access" wgroup.quad spr:0x30CC1++0x00 line.quad 0x00 "ICC_EOIR1_EL1,End Of Interrupt Register 1" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1_EL1 access" rgroup.quad spr:0x30C82++0x00 line.quad 0x00 "ICC_HPPIR0_EL1,Highest Priority Pending Interrupt Register 0" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.quad spr:0x30CC2++0x00 line.quad 0x00 "ICC_HPPIR1_EL1,Highest Priority Pending Interrupt Register 1" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" newline hgroup.quad spr:0x30C80++0x00 hide.quad 0x00 "ICC_IAR0_EL1,Interrupt Acknowledge Register 0" in hgroup.quad spr:0x30CC0++0x00 hide.quad 0x00 "ICC_IAR1_EL1,Interrupt Acknowledge Register 1" in newline group.quad spr:0x30CC6++0x00 line.quad 0x00 "ICC_IGRPEN0_EL1,Interrupt Group 0 Enable Register (EL1)" bitfld.quad 0x00 0. "ENABLE,Enable" "Disabled,Enabled" group.quad spr:0x30CC7++0x00 line.quad 0x00 "ICC_IGRPEN1_EL1,Interrupt Group 1 Enable Register (EL1)" bitfld.quad 0x00 0. "ENABLE,Enable" "Disabled,Enabled" group.quad spr:0x36CC7++0x00 line.quad 0x00 "ICC_IGRPEN1_EL3,Interrupt Group Enable Register 1 (EL3)" bitfld.quad 0x00 1. "ENABLEGRP1S,Enable Group 1 interrupts for the Secure state" "Disabled,Enabled" bitfld.quad 0x00 0. "ENABLEGRP1NS,Enable Group 1 interrupts for the Non-secure state" "Disabled,Enabled" group.quad spr:0x30460++0x00 line.quad 0x00 "ICC_PMR_EL1,Priority Mask Register" hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface" rgroup.quad spr:0x30CB3++0x00 line.quad 0x00 "ICC_RPR_EL1,Running Priority Register" hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface" if (((per.q(spr:0x30CB7))&0x10000000000)==0x00) wgroup.quad spr:0x30CB7++0x00 line.quad 0x00 "ICC_SGI0R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated." else wgroup.quad spr:0x30CB7++0x00 line.quad 0x00 "ICC_SGI0R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif if (((per.q(spr:0x30CB5))&0x10000000000)==0x00) wgroup.quad spr:0x30CB5++0x00 line.quad 0x00 "ICC_SGI1R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated" else wgroup.quad spr:0x30CB5++0x00 line.quad 0x00 "ICC_SGI1R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.quad spr:0x30CC5++0x00 line.quad 0x00 "ICC_SRE_EL1,System Register Enable Register for EL1" bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" rbitfld.quad 0x00 0. "SRE,System Register Enable" "Reserved,Enabled" group.quad spr:0x34C95++0x00 line.quad 0x00 "ICC_SRE_EL2,System Register Enable Register for EL2" rbitfld.quad 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1" "Reserved,Enabled" bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline rbitfld.quad 0x00 0. "SRE,System Register Enable" "Reserved,Enabled" group.quad spr:0x36CC5++0x00 line.quad 0x00 "ICC_SRE_EL3,System Register Enable Register for EL3" rbitfld.quad 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1 and ICC_SRE_EL2" "Reserved,Enabled" bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline rbitfld.quad 0x00 0. "SRE,System Register Enable" "Reserved,Enabled" tree.end tree "AArch64 Virtual GIC CPU Interface System Registers" tree.open "Interrupt Controller Active Priorities Registers" group.quad spr:0x30C84++0x00 line.quad 0x00 "ICV_AP0R0_EL1,Active Priorities Group 0 Register 0 (EL1)" bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.quad spr:0x30C90++0x00 line.quad 0x00 "ICV_AP1R0_EL1,Active Priorities Group 1 Register 0 (EL1)" bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline group.quad spr:0x30C83++0x00 line.quad 0x00 "ICV_BPR0_EL1,Binary Point Register 0 (EL1)" bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" "Reserved,Reserved,[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.quad spr:0x30CC3++0x00 line.quad 0x00 "ICV_BPR1_EL1,Binary Point Register 1 (EL1)" bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" "Reserved,Reserved,[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" group.quad spr:0x30CC4++0x00 line.quad 0x00 "ICV_CTLR_EL1,Control Register (EL1)" rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Valid" rbitfld.quad 0x00 14. "SEIS,SEI Support" "Not supported," rbitfld.quad 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,?..." newline rbitfld.quad 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..." bitfld.quad 0x00 1. "VEOIMODE,Indicates whether ICV_EOIR0 and ICV_EOIR1 provide both priority drop and interrupt deactivation functionality" "Both,Priority drop" bitfld.quad 0x00 0. "VCBPR,Common Binary Point Register" "Separate,Common" wgroup.quad spr:0x30CB1++0x00 line.quad 0x00 "ICV_DIR_EL1,Deactivate Interrupt Register" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the virtual interrupt to be deactivated" wgroup.quad spr:0x30C81++0x00 line.quad 0x00 "ICV_EOIR0_EL1,End Of Interrupt Register 0" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICV_IAR0_EL1 access" wgroup.quad spr:0x30CC1++0x00 line.quad 0x00 "ICV_EOIR1_EL1,End Of Interrupt Register 1" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICV_IAR1_EL1 access" rgroup.quad spr:0x30C82++0x00 line.quad 0x00 "ICV_HPPIR0_EL1,Highest Priority Pending Interrupt Register 0" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.quad spr:0x30CC2++0x00 line.quad 0x00 "ICV_HPPIR1_EL1,Highest Priority Pending Interrupt Register 1" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.quad spr:0x30C80++0x00 line.quad 0x00 "ICV_IAR0_EL1,Interrupt Acknowledge Register 0" rgroup.quad spr:0x30CC0++0x00 line.quad 0x00 "ICV_IAR1_EL1,Interrupt Acknowledge Register 1" group.quad spr:0x30CC6++0x00 line.quad 0x00 "ICV_IGRPEN0_EL1,Interrupt Group 0 Enable register" bitfld.quad 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.quad spr:0x30CC7++0x00 line.quad 0x00 "ICV_IGRPEN1_EL1,Interrupt Group 1 Enable register" bitfld.quad 0x00 0. "ENABLE,Enables Group 1 interrupts" "Disabled,Enabled" group.quad spr:0x30460++0x00 line.quad 0x00 "ICV_PMR_EL1,Priority Mask Register" hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface" rgroup.quad spr:0x30CB3++0x00 line.quad 0x00 "ICV_RPR_EL1,Running Priority Register" hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface" tree.end tree "AArch64 Virtual Interface Control System Registers" tree.open "Hypervisor Active Priorities Registers" group.quad spr:0x34C80++0x00 line.quad 0x00 "ICH_AP0R0_EL2,Hypervisor Active Priorities Group 0 Register 0" bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.quad spr:0x34C90++0x00 line.quad 0x00 "ICH_AP1R0_EL2,Hypervisor Active Priorities Group 1 Register 0" bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline rgroup.quad spr:0x34CB3++0x00 line.quad 0x00 "ICH_EISR_EL2,End of Interrupt Status Register" bitfld.quad 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register ICH_LR3_EL2" "No interrupt,Interrupt" bitfld.quad 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register ICH_LR2_EL2" "No interrupt,Interrupt" bitfld.quad 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register ICH_LR1_EL2" "No interrupt,Interrupt" bitfld.quad 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register ICH_LR0_EL2" "No interrupt,Interrupt" rgroup.quad spr:0x34CB5++0x00 line.quad 0x00 "ICH_ELRSR_EL2,Empty List Register Status Register" bitfld.quad 0x00 3. "STATUS3,Status bit for List register ICH_LR3_EL2" "No interrupt,Interrupt" bitfld.quad 0x00 2. "STATUS2,Status bit for List register ICH_LR2_EL2" "No interrupt,Interrupt" bitfld.quad 0x00 1. "STATUS1,Status bit for List register ICH_LR1_EL2" "No interrupt,Interrupt" bitfld.quad 0x00 0. "STATUS0,Status bit for List register ICH_LR0_EL2" "No interrupt,Interrupt" group.quad spr:0x34CB0++0x00 line.quad 0x00 "ICH_HCR_EL2,Hypervisor Control Register" bitfld.quad 0x00 27.--31. "EOICOUNT,Incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR_EL1 and ICV_DIR" "No trap,Trap" bitfld.quad 0x00 13. "TSEI,Trap all locally generated SEIs" "No trap," newline bitfld.quad 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* and ICV* System registers for Group 1 interrupts to EL2" "No trap,Trap" bitfld.quad 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* and ICV* System registers for Group 0 interrupts to EL2" "No trap,Trap" bitfld.quad 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "No trap,Trap" newline bitfld.quad 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" if (((per.q(spr:0x34CC0))&0x2000000000000000)==0x0) group.quad spr:0x34CC0++0x00 line.quad 0x00 "ICH_LR0_EL2,List Register 0" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline bitfld.quad 0x00 41. "EOI,Maintenance interrupt assertion" "Not asserted,Asserted" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" else group.quad spr:0x34CC0++0x00 line.quad 0x00 "ICH_LR0_EL2,List Register 0" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical interrupt ID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" endif if (((per.q(spr:0x34CC1))&0x2000000000000000)==0x0) group.quad spr:0x34CC1++0x00 line.quad 0x00 "ICH_LR1_EL2,List Register 1" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline bitfld.quad 0x00 41. "EOI,Maintenance interrupt assertion" "Not asserted,Asserted" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" else group.quad spr:0x34CC1++0x00 line.quad 0x00 "ICH_LR1_EL2,List Register 1" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical interrupt ID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" endif if (((per.q(spr:0x34CC2))&0x2000000000000000)==0x0) group.quad spr:0x34CC2++0x00 line.quad 0x00 "ICH_LR2_EL2,List Register 2" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline bitfld.quad 0x00 41. "EOI,Maintenance interrupt assertion" "Not asserted,Asserted" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" else group.quad spr:0x34CC2++0x00 line.quad 0x00 "ICH_LR2_EL2,List Register 2" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical interrupt ID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" endif if (((per.q(spr:0x34CC3))&0x2000000000000000)==0x0) group.quad spr:0x34CC3++0x00 line.quad 0x00 "ICH_LR3_EL2,List Register 3" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline bitfld.quad 0x00 41. "EOI,Maintenance interrupt assertion" "Not asserted,Asserted" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" else group.quad spr:0x34CC3++0x00 line.quad 0x00 "ICH_LR3_EL2,List Register 3" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending/Active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" newline hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical interrupt ID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "VINTID,Virtual INTID of the interrupt" endif rgroup.quad spr:0x34CB2++0x00 line.quad 0x00 "ICH_MISR_EL2,Maintenance Interrupt State Register" bitfld.quad 0x00 7. "VGRP1D,vPE Group 1 Disabled maintenance interrupt assertion" "Not asserted,Asserted" bitfld.quad 0x00 6. "VGRP1E,vPE Group 1 Enabled maintenance interrupt assertion" "Not asserted,Asserted" bitfld.quad 0x00 5. "VGRP0D,vPE Group 0 Disabled maintenance interrupt assertion" "Not asserted,Asserted" bitfld.quad 0x00 4. "VGRP0E,vPE Group 0 Enabled maintenance interrupt assertion" "Not asserted,Asserted" newline bitfld.quad 0x00 3. "NP,No Pending maintenance interrupt assertion" "Not asserted,Asserted" bitfld.quad 0x00 2. "LRENP,List Register Entry Not Present maintenance interrupt assertion" "Not asserted,Asserted" bitfld.quad 0x00 1. "U,Underflow maintenance interrupt assertion" "Not asserted,Asserted" bitfld.quad 0x00 0. "EOI,End of Interrupt maintenance interrupt assertion" "Not asserted,Asserted" group.quad spr:0x34CB7++0x00 line.quad 0x00 "ICH_VMCR_EL2,Virtual Machine Control Register" hexmask.quad.byte 0x00 24.--31. 1. "VPMR,Virtual Priority Mask" bitfld.quad 0x00 21.--23. "VBPR0,Interrupt Priority Field Control And Interrupt Preemption Control" "Reserved,Reserved,[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" bitfld.quad 0x00 18.--20. "VBPR1,Interrupt Priority Field Control And Interrupt Preemption Control" "Reserved,Reserved,[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" bitfld.quad 0x00 9. "VEOIM,Virtual EOI mode. Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Both,Priority drop" newline bitfld.quad 0x00 4. "VCBPR,Decides whether both interrupt groups are controlled by ICV_BPR0_EL1" "Separate,Both" bitfld.quad 0x00 3. "VFIQEN,Virtual FIQ enable" "Reserved,Enabled" bitfld.quad 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled" bitfld.quad 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled" rgroup.quad spr:0x34CB1++0x00 line.quad 0x00 "ICH_VTR_EL2,VGIC Type Register" bitfld.quad 0x00 29.--31. "PRIBITS,The number of virtual priority bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..." bitfld.quad 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..." bitfld.quad 0x00 23.--25. "IDBITS,The number of virtual interrupt identifier bits supported" "16 bits,?..." bitfld.quad 0x00 22. "SEIS,SEI Support" "Not supported," newline bitfld.quad 0x00 21. "A3V,Affinity 3 Valid" "Reserved,Valid" bitfld.quad 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported," bitfld.quad 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Reserved,Supported" bitfld.quad 0x00 0.--4. "LISTREGS,The number of implemented List registers" "Reserved,Reserved,Reserved,4,?..." tree.end tree.end tree "Debug Registers" rgroup.quad spr:0x23010++0x00 line.quad 0x00 "MDCCSR_EL0,Debug Comms Channel Status Register" bitfld.quad 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.quad 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" group.quad spr:0x20020++0x00 line.quad 0x00 "MDCCINT_EL1,Debug Comms Channel Interrupt Enable register" bitfld.quad 0x00 30. "RX,DCC interrupt enable controls" "Disabled,Enabled" bitfld.quad 0x00 29. "TX,DCC interrupt enable controls" "Disabled,Enabled" group.quad spr:0x23040++0x00 line.quad 0x00 "DBGDTR_EL0,Half Duplex Data Transfer Register" rgroup.quad spr:0x23050++0x00 line.quad 0x00 "DBGDTRRX_EL0,Full Duplex Receive Data Transfer Register" wgroup.quad spr:0x23050++0x00 line.quad 0x00 "DBGDTRTX_EL0,Full Duplex Transmit Data Transfer Register" group.quad spr:0x24070++0x00 line.quad 0x00 "DBGVCR32_EL2,Vector Catch Register" bitfld.quad 0x00 31. "NSF,FIQ vector catch enable in Non-secure state" "Disabled,Enabled" bitfld.quad 0x00 30. "NSI,IRQ vector catch enable in Non-secure state" "Disabled,Enabled" bitfld.quad 0x00 28. "NSD,Data Abort vector catch enable in Non-secure state" "Disabled,Enabled" bitfld.quad 0x00 27. "NSP,Prefetch Abort vector catch enable in Non-secure state" "Disabled,Enabled" newline bitfld.quad 0x00 26. "NSS,Supervisor Call (SVC) vector catch enable in Non-secure state" "Disabled,Enabled" bitfld.quad 0x00 25. "NSU,Undefined Instruction vector catch enable in Non-secure state" "Disabled,Enabled" bitfld.quad 0x00 7. "SF,FIQ vector catch enable in Secure state" "Disabled,Enabled" bitfld.quad 0x00 6. "SI,IRQ vector catch enable in Secure state" "Disabled,Enabled" newline bitfld.quad 0x00 4. "SD,Data Abort vector catch enable in Secure state" "Disabled,Enabled" bitfld.quad 0x00 3. "SP,Prefetch Abort vector catch enable in Secure state" "Disabled,Enabled" bitfld.quad 0x00 2. "SS,Supervisor Call (SVC) vector catch enable in Secure state" "Disabled,Enabled" bitfld.quad 0x00 1. "SU,Undefined Instruction vector catch enable in Secure state" "Disabled,Enabled" group.quad spr:0x20002++0x00 line.quad 0x00 "OSDTRRX_EL1,OS Lock Data Transfer Register" if (((per.q(spr:0x20114)&0x02)==0x00)) group.quad spr:0x20022++0x00 line.quad 0x00 "MDSCR_EL1,Monitor Debug System Control Register" rbitfld.quad 0x00 30. "RXFULL,Save/restore of EDSCR.RXfull" "Empty,Full" rbitfld.quad 0x00 29. "TXFULL,Save/restore of EDSCR.TXfull" "Empty,Full" rbitfld.quad 0x00 27. "RXO,Save/restore of EDSCR.RXO" "Low,High" rbitfld.quad 0x00 26. "TXU,Save/restore of EDSCR.TXU" "Low,High" newline rbitfld.quad 0x00 22.--23. "INTDIS,Save/restore of EDSCR.INTDIS" "0,1,2,3" rbitfld.quad 0x00 21. "TDA,Save/restore of EDSCR.TDA" "Low,High" bitfld.quad 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled" rbitfld.quad 0x00 14. "HDE,Save/restore of EDSCR.HDE" "Low,High" newline bitfld.quad 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled" bitfld.quad 0x00 12. "TDCC,Traps EL0 accesses to the DCC registers to EL1" "No trap,Trap" rbitfld.quad 0x00 6. "ERR,Save/restore of EDSCR.ERR" "Low,High" bitfld.quad 0x00 0. "SS,Software step control" "Disabled,Enabled" else group.quad spr:0x20022++0x00 line.quad 0x00 "MDSCR_EL1,Monitor Debug System Control Register" bitfld.quad 0x00 30. "RXFULL,Save/restore of EDSCR.RXfull" "Empty,Full" bitfld.quad 0x00 29. "TXFULL,Save/restore of EDSCR.TXfull" "Empty,Full" bitfld.quad 0x00 27. "RXO,Save/restore of EDSCR.RXO" "Low,High" bitfld.quad 0x00 26. "TXU,Save/restore of EDSCR.TXU" "Low,High" newline bitfld.quad 0x00 22.--23. "INTDIS,Save/restore of EDSCR.INTDIS" "0,1,2,3" bitfld.quad 0x00 21. "TDA,Save/restore of EDSCR.TDA" "Low,High" bitfld.quad 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled" bitfld.quad 0x00 14. "HDE,Save/restore of EDSCR.HDE" "Low,High" newline bitfld.quad 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled" bitfld.quad 0x00 12. "TDCC,Traps EL0 accesses to the DCC registers to EL1" "No trap,Trap" bitfld.quad 0x00 6. "ERR,Save/restore of EDSCR.ERR" "Low,High" bitfld.quad 0x00 0. "SS,Software step control" "Disabled,Enabled" endif group.quad spr:0x20032++0x00 line.quad 0x00 "OSDTRTX_EL1,OS Lock Data Transfer Register" group.quad spr:0x20062++0x00 line.quad 0x00 "OSECCR_EL1,OS Lock Exception Catch Control Register" bitfld.quad 0x00 7. 15. "NS[3],Coarse-grained Non-secure exception catch/return bit NSE[3] and NSR[3]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" bitfld.quad 0x00 6. 14. "NS[2],Coarse-grained Non-secure exception catch/return bit NSE[2] and NSR[2]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" bitfld.quad 0x00 5. 13. "NS[1],Coarse-grained Non-secure exception catch/return bit NSE[1] and NSR[1]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" bitfld.quad 0x00 4. 12. "NS[0],Coarse-grained Non-secure exception catch/return bit NSE[0] and NSR[0]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" newline bitfld.quad 0x00 3. 11. "S[3],Coarse-grained Secure exception catch/return bit SE[3] and SR[3]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" bitfld.quad 0x00 2. 10. "S[2],Coarse-grained Secure exception catch/return bit SE[2] and SR[2]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" bitfld.quad 0x00 1. 9. "S[1],Coarse-grained Secure exception catch/return bit SE[1] and SR[1]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" bitfld.quad 0x00 0. 8. "S[0],Coarse-grained Secure exception catch/return bit SE[0] and SR[0]" "No action/No action,Halt/Halt,Halt/Halt,Halt/No action" rgroup.quad spr:0x20100++0x00 line.quad 0x00 "MDRAR_EL1,Debug ROM Address Register" wgroup.quad spr:0x20104++0x00 line.quad 0x00 "OSLAR_EL1,OS Lock Access Register" bitfld.quad 0x00 0. "OSLK,OS lock" "Unlock,Lock" rgroup.quad spr:0x20114++0x00 line.quad 0x00 "OSLSR_EL1,OS Lock Status Register" bitfld.quad 0x00 2. "NTT,Not 32-bit access" "Low,High" bitfld.quad 0x00 1. "OSLK,OS lock status" "Not locked,Locked" bitfld.quad 0x00 0. 3. "OSLM,OS lock model implemented field" "Reserved,Reserved,Implemented,?..." group.quad spr:0x20134++0x00 line.quad 0x00 "OSDLR_EL1,OS Double-lock Register" bitfld.quad 0x00 0. "DLK,OS double-lock control" "Not locked,Locked" group.quad spr:0x20144++0x00 line.quad 0x00 "DBGPRCR_EL1,Debug Power/Reset Control Register" bitfld.quad 0x00 0. "CORENPDRQ,Core no powerdown request" "Powered down,Emulated" group.quad spr:0x20786++0x00 line.quad 0x00 "DBGCLAIMSET_EL1,Claim Tag register Set" bitfld.quad 0x0 7. "CT7,Claim Tag 7 Set" "Not set,Set" bitfld.quad 0x0 6. "CT6,Claim Tag 6 Set" "Not set,Set" bitfld.quad 0x0 5. "CT5,Claim Tag 5 Set" "Not set,Set" bitfld.quad 0x0 4. "CT4,Claim Tag 4 Set" "Not set,Set" newline bitfld.quad 0x0 3. "CT3,Claim Tag 3 Set" "Not set,Set" bitfld.quad 0x0 2. "CT2,Claim Tag 2 Set" "Not set,Set" bitfld.quad 0x0 1. "CT1,Claim Tag 1 Set" "Not set,Set" bitfld.quad 0x0 0. "CT0,Claim Tag 0 Set" "Not set,Set" group.quad spr:0x20796++0x00 line.quad 0x00 "DBGCLAIMCLR_EL1,Claim Tag register Clear" bitfld.quad 0x0 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared" bitfld.quad 0x0 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared" bitfld.quad 0x0 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared" bitfld.quad 0x0 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared" newline bitfld.quad 0x0 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared" bitfld.quad 0x0 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared" bitfld.quad 0x0 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared" bitfld.quad 0x0 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared" rgroup.quad spr:0x207e6++0x00 line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register" bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented" bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled" bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented" bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled" newline bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented" bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled" bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented" bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled" if (((per.q(spr:0x30400))&0x10)==0x10) group.quad spr:0x30400++0x00 line.quad 0x00 "SPSR_EL1,Saved Program Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" newline bitfld.quad 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" newline bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" newline bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "User,FIQ,IRQ,Supervisor,,,,Abort,,,Hyp,Undefined,,,,System" else group.quad spr:0x30400++0x00 line.quad 0x00 "SPSR_EL1,Saved Program Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 23. "UAO,User Access Override" "Standard routines,New routines" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" newline bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" bitfld.quad 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" newline bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "El0t,,,,EL1t,EL1h,?..." endif if (((per.q(spr:0x34400))&0x10)==0x10) group.quad spr:0x34400++0x00 line.quad 0x00 "SPSR_EL2,Saved Program Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" newline bitfld.quad 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" newline bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" newline bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "User,FIQ,IRQ,Supervisor,,,,Abort,,,Hyp,Undefined,,,,System" else group.quad spr:0x34400++0x00 line.quad 0x00 "SPSR_EL2,Saved Program Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 23. "UAO,User Access Override" "Standard routines,New routines" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" newline bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" bitfld.quad 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" newline bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "El0t,,,,EL1t,EL1h,?..." endif if (((per.q(spr:0x36400))&0x10)==0x10) group.quad spr:0x36400++0x00 line.quad 0x00 "SPSR_EL3,Saved Program Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" newline bitfld.quad 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" newline bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" newline bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "User,FIQ,IRQ,Supervisor,,,,Abort,,,Hyp,Undefined,,,,System" else group.quad spr:0x36400++0x00 line.quad 0x00 "SPSR_EL3,Saved Program Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 23. "UAO,User Access Override" "Standard routines,New routines" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" newline bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" bitfld.quad 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" newline bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "El0t,,,,EL1t,EL1h,?..." endif if (((per.q(spr:0x33450))&0x10)==0x10) group.quad spr:0x33450++0x00 line.quad 0x00 "DSPSR_EL0,Debug Saved Processor Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" newline bitfld.quad 0x00 13.--15. "IT[5:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 25.--26. 10.--12. "IT[0:4],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" newline bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" newline bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "User,FIQ,IRQ,Supervisor,,,Monitor,Abort,,,Hyp,Undefined,,,,System" else group.quad spr:0x33450++0x00 line.quad 0x00 "DSPSR_EL0,Debug Saved Processor Status Register" bitfld.quad 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.quad 0x00 30. "Z,Zero condition flag" "Not zero,Zero" bitfld.quad 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.quad 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.quad 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.quad 0x00 23. "UAO,User Access Override" "Standard routines,New routines" bitfld.quad 0x00 22. "PAN,Privileged Access Never" "No,Yes" bitfld.quad 0x00 21. "SS,Software step" "0,1" newline bitfld.quad 0x00 20. "IL,Illegal Execution state" "0,1" bitfld.quad 0x00 13.--15. "IT[5:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 25.--26. 10.--12. "IT[0:4],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 9. "E,Endianness state bit" "Little,Big" bitfld.quad 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.quad 0x00 7. "I,IRQ mask bit" "Not masked,Masked" bitfld.quad 0x00 6. "F,FIQ mask bit" "Not masked,Masked" newline bitfld.quad 0x00 5. "T,T32 Instruction set state" "A32,T32" bitfld.quad 0x00 4. "M[4],Execution state that the exception was taken from" "AArch64,AArch32" bitfld.quad 0x00 0.--3. "M[3:0],Current PE mode" "El0t,,,,EL1t,EL1h,,,EL2t,EL2h,,EL3t,EL3h,?..." endif tree.end tree "Activity Monitors Unit" if (CORENAME()=="CORTEXA75") group.quad spr:0x33F97++0x00 line.quad 0x00 "AMCNTENCLR_EL0,Activity Monitors Count Enable Clear Register" bitfld.quad 0x00 4. "P4,AMEVCNTR4 disable bit [read/write]" "Disabled/No effect,Enabled/Disable" newline bitfld.quad 0x00 3. "P3,AMEVCNTR3 disable bit [read/write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 2. "P2,AMEVCNTR2 disable bit [read/write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 1. "P1,AMEVCNTR1 disable bit [read/write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 0. "P0,AMEVCNTR0 disable bit [read/write]" "Disabled/No effect,Enabled/Disable" group.quad spr:0x33F96++0x00 line.quad 0x00 "AMCNTENSET_EL0,Activity Monitors Count Enable Set Register" bitfld.quad 0x00 4. "P4,AMEVCNTR4 enable bit" "Disabled,Enabled" newline bitfld.quad 0x00 3. "P3,AMEVCNTR3 enable bit" "Disabled,Enabled" bitfld.quad 0x00 2. "P2,AMEVCNTR2 enable bit" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,AMEVCNTR1 enable bit" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,AMEVCNTR0 enable bit" "Disabled,Enabled" group.quad spr:0x33FA6++0x00 line.quad 0x00 "AMCFGR_EL0,Activity Monitors Configuration Register" bitfld.quad 0x00 8.--13. "SIZE,Size of counters" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64" hexmask.quad.byte 0x00 0.--7. 1. "N,Number of activity counters implemented" group.quad spr:0x33FA7++0x00 line.quad 0x00 "AMUSERENR_EL0,Activity Monitor EL0 Enable access" bitfld.quad 0x00 0. "EN,Traps EL0 accesses to the activity monitor registers to EL1" "Trapped,Not trapped" group.quad spr:0x33F90++0x00 line.quad 0x00 "AMEVCNTR0_EL0,Activity Monitor Event Counter Register 0" group.quad spr:(0x33F90+0x10)++0x00 line.quad 0x00 "AMEVTYPER0_EL0,Activity Monitor Event Type Register 0" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,EVTCOUNT" group.quad spr:0x33F91++0x00 line.quad 0x00 "AMEVCNTR1_EL0,Activity Monitor Event Counter Register 1" group.quad spr:(0x33F91+0x10)++0x00 line.quad 0x00 "AMEVTYPER1_EL0,Activity Monitor Event Type Register 1" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,EVTCOUNT" group.quad spr:0x33F92++0x00 line.quad 0x00 "AMEVCNTR2_EL0,Activity Monitor Event Counter Register 2" group.quad spr:(0x33F92+0x10)++0x00 line.quad 0x00 "AMEVTYPER2_EL0,Activity Monitor Event Type Register 2" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,EVTCOUNT" group.quad spr:0x33F93++0x00 line.quad 0x00 "AMEVCNTR3_EL0,Activity Monitor Event Counter Register 3" group.quad spr:(0x33F93+0x10)++0x00 line.quad 0x00 "AMEVTYPER3_EL0,Activity Monitor Event Type Register 3" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,EVTCOUNT" group.quad spr:0x33F94++0x00 line.quad 0x00 "AMEVCNTR4_EL0,Activity Monitor Event Counter Register 4" group.quad spr:(0x33F94+0x10)++0x00 line.quad 0x00 "AMEVTYPER4_EL0,Activity Monitor Event Type Register 4" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,EVTCOUNT" endif tree.end tree "Breakpoint Registers" tree "Breakpoint 0" if ((((per.q(spr:0x20005+0x0))&0xF00000)<=0x100000)||((((per.q(spr:0x20005+0x0))&0xF00000)>=0x400000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x500000))) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x0))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x0))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x700000))||((((per.q(spr:0x20005+0x0))&0xF00000)>=0xC00000))) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x900000)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0xB00000)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" else rgroup.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" in endif group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2_EL1,Reserved,Reserved,A64/A32/DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 1" if ((((per.q(spr:0x20005+0x10))&0xF00000)<=0x100000)||((((per.q(spr:0x20005+0x10))&0xF00000)>=0x400000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x500000))) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x10))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x10))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x700000))||((((per.q(spr:0x20005+0x10))&0xF00000)>=0xC00000))) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x900000)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0xB00000)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" else rgroup.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" in endif group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2_EL1,Reserved,Reserved,A64/A32/DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 2" if ((((per.q(spr:0x20005+0x20))&0xF00000)<=0x100000)||((((per.q(spr:0x20005+0x20))&0xF00000)>=0x400000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x500000))) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x20))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x20))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x700000))||((((per.q(spr:0x20005+0x20))&0xF00000)>=0xC00000))) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x900000)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0xB00000)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" else rgroup.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" in endif group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2_EL1,Reserved,Reserved,A64/A32/DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 3" if ((((per.q(spr:0x20005+0x30))&0xF00000)<=0x100000)||((((per.q(spr:0x20005+0x30))&0xF00000)>=0x400000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x500000))) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x30))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x30))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x700000))||((((per.q(spr:0x20005+0x30))&0xF00000)>=0xC00000))) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x900000)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0xB00000)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" else rgroup.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" in endif group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2_EL1,Reserved,Reserved,A64/A32/DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 4" if ((((per.q(spr:0x20005+0x40))&0xF00000)<=0x100000)||((((per.q(spr:0x20005+0x40))&0xF00000)>=0x400000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x500000))) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x40))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x40))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x700000))||((((per.q(spr:0x20005+0x40))&0xF00000)>=0xC00000))) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x900000)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0xB00000)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" else rgroup.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" in endif group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2_EL1,Reserved,Reserved,A64/A32/DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 5" if ((((per.q(spr:0x20005+0x50))&0xF00000)<=0x100000)||((((per.q(spr:0x20005+0x50))&0xF00000)>=0x400000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x500000))) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x50))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x50))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x700000))||((((per.q(spr:0x20005+0x50))&0xF00000)>=0xC00000))) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x900000)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0xB00000)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" else rgroup.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" in endif group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2_EL1,Reserved,Reserved,A64/A32/DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree.end tree "Watchpoint Registers" tree "Watchpoint 0" group.quad spr:(0x20006+0x0)++0x00 line.quad 0x00 "DBGWVR0_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address" group.quad spr:(0x20007+0x0)++0x00 line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree "Watchpoint 1" group.quad spr:(0x20006+0x10)++0x00 line.quad 0x00 "DBGWVR1_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address" group.quad spr:(0x20007+0x10)++0x00 line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree "Watchpoint 2" group.quad spr:(0x20006+0x20)++0x00 line.quad 0x00 "DBGWVR2_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address" group.quad spr:(0x20007+0x20)++0x00 line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree "Watchpoint 3" group.quad spr:(0x20006+0x30)++0x00 line.quad 0x00 "DBGWVR3_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address" group.quad spr:(0x20007+0x30)++0x00 line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree.end tree "LORegions Registers" group.quad spr:0x30A40++0x00 line.quad 0x00 "LORSA_EL1,LORegion Start Address" hexmask.quad.long 0x00 16.--47. 0x1 "SA,Start physical address bits[47:16]" bitfld.quad 0x00 0. "VALID,Indicates whether the LORegion Descriptor is enabled" "Not valid,Valid" group.quad spr:0x30A41++0x00 line.quad 0x00 "LOREA_EL1,LORegion End Address" hexmask.quad.long 0x00 16.--47. 0x1 "EA,End physical address bits[47:16]" group.quad spr:0x30A42++0x00 line.quad 0x00 "LORN_EL1,LORegion Number Register" bitfld.quad 0x00 0.--1. "NUM,Indicates the LORegion number" "0,1,2,3" group.quad spr:0x30A43++0x00 line.quad 0x00 "LORC_EL1,LORegion Control Register" bitfld.quad 0x00 2.--3. "DS,Descriptor Select" "0,1,2,3" bitfld.quad 0x00 0. "EN,Enable" "Disabled,Enabled" rgroup.quad spr:0x30A47++0x00 line.quad 0x00 "LORID_EL1,Limited Order Region Identification Register" hexmask.quad.byte 0x00 16.--23. 1. "LD,Number of LOR Descriptors supported by the implementation" hexmask.quad.byte 0x00 0.--7. 1. "LR,Number of LORegions supported by the implementation" tree.end tree "DynamIQ Shared Unit" tree "Cluster Control Registers" if (((per.q(spr:0x30F30))&0x2000)==0x00) rgroup.quad spr:0x30F30++0x00 line.quad 0x00 "CLUSTERCFR_EL1,Cluster Configuration Register" bitfld.quad 0x00 24.--27. "NPE,Number of processing elements" "1,2,?..." bitfld.quad 0x00 23. "L3_DATA_RAM_DELAY,L3 data RAM write delay" "Not delayed,Delayed" newline bitfld.quad 0x00 17. "CRSP3,Core 3 register slice present" "Not present,Present" bitfld.quad 0x00 16. "CRSP2,Core 2 register slice present" "Not present,Present" newline bitfld.quad 0x00 15. "CRSP1,Core 1 register slice present" "Not present,Present" bitfld.quad 0x00 14. "CRSP0,Core 0 register slice present" "Not present,Present" bitfld.quad 0x00 13. "BUS_INTERFACE_EXT,Bus interface extended" "Not extended,Extended" newline bitfld.quad 0x00 12. "PPP,Peripheral port present" "Not present,Present" bitfld.quad 0x00 11. "ACP,ACP interface present" "Not present,Present" bitfld.quad 0x00 9.--10. "BUS_INTERFACE,Bus interface configuration" "Single 128-bit ACE,Dual 128-bit ACE,Single 128-bit CHI,Single 256-bit CHI" newline bitfld.quad 0x00 8. "SCU_L3_ECC,SCU-L3 is configured with ECC" "No ECC,ECC" bitfld.quad 0x00 7. "L3_DATA_RAM_RS,L3 data RAM register slice present" "Not present,Present" bitfld.quad 0x00 6. "L3_DATA_RAM_RL,L3 data RAM read latency" "2 cycles,3 cycles" newline bitfld.quad 0x00 5. "L3_DATA_RAM_WL,L3 data RAM write latency" "1 cycle,2 cycles" bitfld.quad 0x00 4. "L3_CACHE_PRESENT,L3 cache present" "Not present,Present" bitfld.quad 0x00 0.--2. "NOC,Number of cores present in the cluster" "1,2,3,4,?..." else rgroup.quad spr:0x30F30++0x00 line.quad 0x00 "CLUSTERCFR_EL1,Cluster Configuration Register" bitfld.quad 0x00 24.--27. "NPE,Number of processing elements" "1,2,?..." bitfld.quad 0x00 23. "L3_DATA_RAM_DELAY,L3 data RAM write delay" "Not delayed,Delayed" newline bitfld.quad 0x00 17. "CRSP3,Core 3 register slice present" "Not present,Present" bitfld.quad 0x00 16. "CRSP2,Core 2 register slice present" "Not present,Present" newline bitfld.quad 0x00 15. "CRSP1,Core 1 register slice present" "Not present,Present" bitfld.quad 0x00 14. "CRSP0,Core 0 register slice present" "Not present,Present" bitfld.quad 0x00 13. "BUS_INTERFACE_EXT,Bus interface extended" "Not extended,Extended" newline bitfld.quad 0x00 12. "PPP,Peripheral port present" "Not present,Present" bitfld.quad 0x00 11. "ACP,ACP interface present" "Not present,Present" bitfld.quad 0x00 9.--10. "BUS_INTERFACE,Bus interface configuration" "Single 128-bit ACE,Dual 128-bit ACE,Single 128-bit CHI,Dual 256-bit CHI" newline bitfld.quad 0x00 8. "SCU_L3_ECC,SCU-L3 is configured with ECC" "No ECC,ECC" bitfld.quad 0x00 7. "L3_DATA_RAM_RS,L3 data RAM register slice present" "Not present,Present" bitfld.quad 0x00 6. "L3_DATA_RAM_RL,L3 data RAM read latency" "2 cycles,3 cycles" newline bitfld.quad 0x00 5. "L3_DATA_RAM_WL,L3 data RAM write latency" "1 cycle,2 cycles" bitfld.quad 0x00 4. "L3_CACHE_PRESENT,L3 cache present" "Not present,Present" bitfld.quad 0x00 0.--2. "NOC,Number of cores present in the cluster" "1,2,3,4,?..." endif rgroup.quad spr:0x30F31++0x00 line.quad 0x00 "CLUSTERIDR_EL1,Cluster Main Revision ID" hexmask.quad.byte 0x00 4.--7. 1. "VARIANT,Indicates the variant of the FCM" hexmask.quad.byte 0x00 0.--3. 1. "REVISION,Indicates the minor revision number of the FCM" rgroup.quad spr:0x30F32++0x00 line.quad 0x00 "CLUSTERREVIDR_EL1,Cluster ECO ID" group.quad spr:0x30F33++0x00 line.quad 0x00 "CLUSTERACTLR_EL1,Cluster Auxiliary Control Register" if (((per.q(spr:0x30F30))&0x600)==(0x00||0x200)) group.quad spr:0x30F34++0x00 line.quad 0x00 "CLUSTERECTLR_EL1,Cluster Extended Control Register" bitfld.quad 0x00 14. "CUEC,Cache UniqueClean eviction control" "Disabled,Enabled" bitfld.quad 0x00 8.--10. "PMD,Prefetch matching delay" "1,2,4,8,16,32,64,128" bitfld.quad 0x00 7. "DICA,Disable interconnect cacheable atomics" "No,Yes" newline bitfld.quad 0x00 4. "IDPS,Interconnect data poisoning support" "Not supported,Supported" bitfld.quad 0x00 3. "CTEC,Disables send evict transactions on the ACE/CHI master" "No,Yes" bitfld.quad 0x00 2. "CFUCEC,Disables WriteEvict requests on the ACE/CHI master (Powering down part/All L3 cache)" "No,Yes" newline bitfld.quad 0x00 0. "DNCWL,Disable the limit on the number of non-cacheable writes that are allowed on the ACE interface" "No,Yes" else group.quad spr:0x30F34++0x00 line.quad 0x00 "CLUSTERECTLR_EL1,Cluster Extended Control Register" bitfld.quad 0x00 14. "CUEC,Cache UniqueClean eviction control" "Disabled,Enabled" bitfld.quad 0x00 8.--10. "PMD,Prefetch matching delay" "1,2,4,8,16,32,64,128" bitfld.quad 0x00 7. "DICA,Disable interconnect cacheable atomics" "No,Yes" newline bitfld.quad 0x00 4. "IDPS,Interconnect data poisoning support" "Not supported,Supported" bitfld.quad 0x00 3. "CTEC,Disables send evict transactions on the ACE/CHI master" "No,Yes" bitfld.quad 0x00 2. "CFUCEC,Disables WriteEvict requests on the ACE/CHI master (Powering down part/All L3 cache)" "No,Yes" endif group.quad spr:0x30F35++0x00 line.quad 0x00 "CLUSTERPWRCTLR_EL1,Cluster Power Control Register" bitfld.quad 0x00 4.--7. "CPPR,Cache portion power request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0.--2. "L3_DATA_RAM_RC,L3 data RAM retention control [Number of Architectural Timer ticks required before retention entry]" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" group.quad spr:0x30F36++0x00 line.quad 0x00 "CLUSTERPWRDN_EL1,Cluster Power Down Register" bitfld.quad 0x00 1. "MRR,Memory retention required" "Not required,Required" bitfld.quad 0x00 0. "CPR,Cluster power required" "Not required,Required" rgroup.quad spr:0x30F37++0x00 line.quad 0x00 "CLUSTERPWRSTAT_EL1,Cluster Power Status Register" bitfld.quad 0x00 4.--7. "CPPS,This bits indicates which cache portions are currently powered up and available" "No ways,Ways 0-3,Reserved,Ways 0-7,Reserved,Reserved,Reserved,Ways 0-11,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Ways 0-15" bitfld.quad 0x00 1. "RWPD,Enabled memory retention when all cores are powered down" "Disabled,Enabled" bitfld.quad 0x00 0. "DCPD,Disabled cluster power down when all cores are powered down" "No,Yes" group.quad spr:0x30F40++0x00 line.quad 0x00 "CLUSTERTHREADSID_EL1,Cluster Thread Scheme ID Register" bitfld.quad 0x00 0.--2. "SCHEME_ID_THREAD,Scheme ID for current thread" "0,1,2,3,4,5,6,7" group.quad spr:0x30F41++0x00 line.quad 0x00 "CLUSTERACPSID_EL1,Cluster ACP Scheme ID Register" bitfld.quad 0x00 0.--2. "SCHEME_ID_ACP,Scheme ID for ACP transactions" "0,1,2,3,4,5,6,7" group.quad spr:0x30F42++0x00 line.quad 0x00 "CLUSTERSTASHSID_EL1,Cluster Stash Scheme ID Register" bitfld.quad 0x00 0.--2. "SCHEME_ID_SR,Scheme ID for stash requests received from the interconnect" "0,1,2,3,4,5,6,7" group.quad spr:0x30F43++0x00 line.quad 0x00 "CLUSTERPARTCR_EL1,Cluster Partition Control Register" bitfld.quad 0x00 31. "W3_ID7,Way group 3 is assigned as private to scheme ID 7" "Not assigned,Assigned" bitfld.quad 0x00 30. "W2_ID7,Way group 2 is assigned as private to scheme ID 7" "Not assigned,Assigned" bitfld.quad 0x00 29. "W1_ID7,Way group 1 is assigned as private to scheme ID 7" "Not assigned,Assigned" newline bitfld.quad 0x00 28. "W0_ID7,Way group 0 is assigned as private to scheme ID 7" "Not assigned,Assigned" bitfld.quad 0x00 27. "W3_ID6,Way group 3 is assigned as private to scheme ID 6" "Not assigned,Assigned" bitfld.quad 0x00 26. "W2_ID6,Way group 2 is assigned as private to scheme ID 6" "Not assigned,Assigned" newline bitfld.quad 0x00 25. "W1_ID6,Way group 1 is assigned as private to scheme ID 6" "Not assigned,Assigned" bitfld.quad 0x00 24. "W0_ID6,Way group 0 is assigned as private to scheme ID 6" "Not assigned,Assigned" bitfld.quad 0x00 23. "W3_ID5,Way group 3 is assigned as private to scheme ID 5" "Not assigned,Assigned" newline bitfld.quad 0x00 22. "W2_ID5,Way group 2 is assigned as private to scheme ID 5" "Not assigned,Assigned" bitfld.quad 0x00 21. "W1_ID5,Way group 1 is assigned as private to scheme ID 5" "Not assigned,Assigned" bitfld.quad 0x00 20. "W0_ID5,Way group 0 is assigned as private to scheme ID 5" "Not assigned,Assigned" newline bitfld.quad 0x00 19. "W3_ID4,Way group 3 is assigned as private to scheme ID 4" "Not assigned,Assigned" bitfld.quad 0x00 18. "W2_ID4,Way group 2 is assigned as private to scheme ID 4" "Not assigned,Assigned" bitfld.quad 0x00 17. "W1_ID4,Way group 1 is assigned as private to scheme ID 4" "Not assigned,Assigned" newline bitfld.quad 0x00 16. "W0_ID4,Way group 0 is assigned as private to scheme ID 4" "Not assigned,Assigned" bitfld.quad 0x00 15. "W3_ID3,Way group 3 is assigned as private to scheme ID 3" "Not assigned,Assigned" bitfld.quad 0x00 14. "W2_ID3,Way group 2 is assigned as private to scheme ID 3" "Not assigned,Assigned" newline bitfld.quad 0x00 13. "W1_ID3,Way group 1 is assigned as private to scheme ID 3" "Not assigned,Assigned" bitfld.quad 0x00 12. "W0_ID3,Way group 0 is assigned as private to scheme ID 3" "Not assigned,Assigned" bitfld.quad 0x00 11. "W3_ID2,Way group 3 is assigned as private to scheme ID 2" "Not assigned,Assigned" newline bitfld.quad 0x00 10. "W2_ID2,Way group 2 is assigned as private to scheme ID 2" "Not assigned,Assigned" bitfld.quad 0x00 9. "W1_ID2,Way group 1 is assigned as private to scheme ID 2" "Not assigned,Assigned" bitfld.quad 0x00 8. "W0_ID2,Way group 0 is assigned as private to scheme ID 2" "Not assigned,Assigned" newline bitfld.quad 0x00 7. "W3_ID1,Way group 3 is assigned as private to scheme ID 1" "Not assigned,Assigned" bitfld.quad 0x00 6. "W2_ID1,Way group 2 is assigned as private to scheme ID 1" "Not assigned,Assigned" bitfld.quad 0x00 5. "W1_ID1,Way group 1 is assigned as private to scheme ID 1" "Not assigned,Assigned" newline bitfld.quad 0x00 4. "W0_ID1,Way group 0 is assigned as private to scheme ID 1" "Not assigned,Assigned" bitfld.quad 0x00 3. "W3_ID0,Way group 3 is assigned as private to scheme ID 0" "Not assigned,Assigned" bitfld.quad 0x00 2. "W2_ID0,Way group 2 is assigned as private to scheme ID 0" "Not assigned,Assigned" newline bitfld.quad 0x00 1. "W1_ID0,Way group 1 is assigned as private to scheme ID 0" "Not assigned,Assigned" bitfld.quad 0x00 0. "W0_ID0,Way group 0 is assigned as private to scheme ID 0" "Not assigned,Assigned" group.quad spr:0x30F44++0x00 line.quad 0x00 "CLUSTERBUSQOS_EL1,Cluster Bus QoS Control Register" bitfld.quad 0x00 28.--31. "CHI_BUS_QOS_SCHEME_ID7,Value driven on the CHI bus QoS field for scheme ID 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 24.--27. "CHI_BUS_QOS_SCHEME_ID6,Value driven on the CHI bus QoS field for scheme ID 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 20.--23. "CHI_BUS_QOS_SCHEME_ID5,Value driven on the CHI bus QoS field for scheme ID 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 16.--19. "CHI_BUS_QOS_SCHEME_ID4,Value driven on the CHI bus QoS field for scheme ID 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 12.--15. "CHI_BUS_QOS_SCHEME_ID3,Value driven on the CHI bus QoS field for scheme ID 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 8.--11. "CHI_BUS_QOS_SCHEME_ID2,Value driven on the CHI bus QoS field for scheme ID 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 4.--7. "CHI_BUS_QOS_SCHEME_ID1,Value driven on the CHI bus QoS field for scheme ID 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0.--3. "CHI_BUS_QOS_SCHEME_ID0,Value driven on the CHI bus QoS field for scheme ID 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.quad spr:0x30F45++0x00 line.quad 0x00 "CLUSTERL3HIT_EL1,Cluster L3 Hit Counter Register" group.quad spr:0x30F46++0x00 line.quad 0x00 "CLUSTERL3MISS_EL1,Cluster L3 Miss Counter Register" group.quad spr:0x30F47++0x00 line.quad 0x00 "CLUSTERTHREADSIDOVR_EL1,Cluster Thread Scheme ID Override Register" bitfld.quad 0x00 16.--18. "SCHEME_ID_MASK,A bit set in the mask causes the matching bit to be taken from this register rather than from the CLUSTERTHREADSID_EL1 register" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 0.--2. "SCHEME_ID_THREAD,Scheme ID for this thread if masked" "0,1,2,3,4,5,6,7" tree.end tree "Error System Registers" rgroup.quad spr:0x30530++0x00 line.quad 0x00 "ERRIDR_EL1,Error ID Register" hexmask.quad.word 0x00 0.--15. 1. "NUM,Number of records that can be accessed through the Error Record system registers" group.quad spr:0x30531++0x00 line.quad 0x00 "ERRSELR_EL1,Error Record Select Register" bitfld.quad 0x00 0. "SEL,Selects the record accessed through the ERX registers" "Record 0 - Core,Record 1 - DSU" if (((per.q(spr:0x30531))&0x01)==0x00) if (CORENAME()=="CORTEXA75") rgroup.quad spr:0x30540++0x00 line.quad 0x00 "ERXFR_EL1,Error Record Feature Register" bitfld.quad 0x00 10.--11. "CFI,Fault handling interrupt for corrected errors" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 6.--7. "FI,Fault handling interrupt" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 4.--5. "UI,Error recovery interrupt for uncorrected errors" "Reserved,Reserved,Implemented,?..." newline bitfld.quad 0x00 0.--1. "ED,Error detection and correction" "Reserved,Reserved,Implemented,?..." group.quad spr:0x30541++0x00 line.quad 0x00 "ERXCTLR_EL1,Selected Error Record Control Register" bitfld.quad 0x00 8. "CFI,Fault handling interrupt for corrected errors enable" "No interrupt,Interrupt" bitfld.quad 0x00 3. "FI,Fault handling interrupt enable" "No interrupt,Interrupt" bitfld.quad 0x00 2. "UI,Uncorrected error recovery interrupt enable" "No interrupt,Interrupt" group.quad spr:0x30542++0x00 line.quad 0x00 "ERXSTATUS_EL1,Selected Error Record Status Register" bitfld.quad 0x00 31. "AV,Address valid" "Not valid,Valid" bitfld.quad 0x00 30. "V,Status register valid" "Not valid,Valid" bitfld.quad 0x00 29. "UE,Uncorrected Error" "No error,>=1 error" newline bitfld.quad 0x00 28. "ER,Error reported" "No error,Error" bitfld.quad 0x00 27. "OF,Error overflow" "No error,>1 error" bitfld.quad 0x00 26. "MV,Miscellaneous registers valid" "Not valid,Valid" newline bitfld.quad 0x00 24.--25. "CE,Corrected errors" "No error,Reserved,>=1 error,?..." bitfld.quad 0x00 23. "DE,Deferred errors" "No error,>=1 error" bitfld.quad 0x00 22. "PN,Poison" "No distinction,?..." newline bitfld.quad 0x00 20.--21. "UET,Uncorrected error type" "Uncontainable,?..." newline abitfld.quad 0x00 0.--7. "SERR,Primary error code" "0x00=No error,0x02=ECC/internal data buffer,0x06=ECC/Cache data RAM,0x07=ECC/Cache tag/Dirty RAM,0x08=Parity/TLB data,0x09=Parity/TLB tag,0x15=Deferred not supported" group.quad spr:0x30543++0x00 line.quad 0x00 "ERXADDR_EL1,Selected Error Record Address Register" bitfld.quad 0x00 63. "NS,Non-secure attribute" "Secure,Non-secure" bitfld.quad 0x00 62. "SI,Secure incorrect" "Non secure,Secure" bitfld.quad 0x00 61. "AI,Address incomplete or incorrect" "Correct,Not correct" hexmask.quad 0x00 0.--43. 0x01 "PADDR,Physical address" group.quad spr:0x30550++0x00 line.quad 0x00 "ERXMISC0_EL1,Selected Error Record Miscellaneous Register 0" hexmask.quad.byte 0x00 32.--47. 1. "CECO,Corrected error count other" bitfld.quad 0x00 28.--31. "WAY,Indicates the way that contained the error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.quad.word 0x00 6.--18. 1. "INDX,Indicates the index that contained the error" newline bitfld.quad 0x00 5. "TLBRAM,Indicates which TLB RAM block the error occurs" "RAM 0,RAM 1" bitfld.quad 0x00 1.--3. "LVL,Indicates the level that contained the error" "level 1,Level 2,?..." bitfld.quad 0x00 0. "IND,Indicates the type of cache that contained the error" "L1 data/Unified L2/TLB,L1 instruction" group.quad spr:0x30551++0x00 line.quad 0x00 "ERXMISC1_EL1,Selected Error Record Miscellaneous Register 1" group.quad spr:0x30F22++0x00 line.quad 0x00 "ERXPFGCDN_EL1,Selected Error Pseudo Fault Generation Count Down Register" group.quad spr:0x30F21++0x00 line.quad 0x00 "ERXPFGCTL_EL1,Selected Error Pseudo Fault Generation Control Register" bitfld.quad 0x00 31. "CDNEN,Count down enable" "Disabled,Enabled" newline bitfld.quad 0x00 30. "R,Restart" "Stop,Reloaded" bitfld.quad 0x00 6. "CE,Corrected error generation enable" "Disabled,Enabled" newline bitfld.quad 0x00 5. "DE,Deferred Error generation enable" "Disabled,Enabled" bitfld.quad 0x00 1. "UC,Uncontainable error generation enable" "Disabled,Enabled" rgroup.quad spr:0x30F20++0x00 line.quad 0x00 "ERXPFGF_EL1,Selected Pseudo Fault Generation Feature Register" bitfld.quad 0x00 31. "PFG,Pseudo fault generation" "Reserved,Supported" bitfld.quad 0x00 30. "R,Error Generation Counter restart mode support" "Reserved,Supported" newline bitfld.quad 0x00 6. "CE,Corrected Error generation" "Reserved,Supported" bitfld.quad 0x00 5. "DE,Deferred error generation" "Reserved,Supported" newline bitfld.quad 0x00 4. "UEO,Latent or restartable error generation" "Not supported,?..." bitfld.quad 0x00 3. "UER,Signaled or recoverable error generation" "Not supported,?..." newline bitfld.quad 0x00 2. "UEU,Unrecoverable error generation" "Not supported,?..." bitfld.quad 0x00 1. "UC,Uncontainable error generation" "Reserved,Supported" elif (CORENAME()=="CORTEXA55") rgroup.quad spr:0x30540++0x00 line.quad 0x00 "ERXFR_EL1,Error Record Feature Register" bitfld.quad 0x00 18.--19. "CEO,Corrected Error Overwrite" "Count CE,?..." bitfld.quad 0x00 16.--17. "DUI,Error recovery interrupt for deferred errors" "Not supported,?..." bitfld.quad 0x00 15. "RP,Repeat counter" "Reserved,Implemented" newline bitfld.quad 0x00 12.--14. "CEC,Corrected Error Counter" "Reserved,Reserved,8-bit,?..." bitfld.quad 0x00 10.--11. "CFI,Fault handling interrupt for corrected errors" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 8.--9. "UE,In-band uncorrected error reporting" "Reserved,Implemented,?..." newline bitfld.quad 0x00 6.--7. "FI,Fault handling interrupt" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 4.--5. "UI,Error recovery interrupt for uncorrected errors" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 2.--3. "DE,Defers errors" "Reserved,Enabled,?..." newline bitfld.quad 0x00 0.--1. "ED,Error detection and correction" "Reserved,Reserved,Implemented,?..." group.quad spr:0x30541++0x00 line.quad 0x00 "ERXCTLR_EL1,Selected Error Record Control Register" bitfld.quad 0x00 8. "CFI,Fault handling interrupt for corrected errors enable" "No interrupt,Interrupt" bitfld.quad 0x00 3. "FI,Fault handling interrupt enable" "No interrupt,Interrupt" bitfld.quad 0x00 2. "UI,Uncorrected error recovery interrupt enable" "No interrupt,Interrupt" newline bitfld.quad 0x00 0. "ED,Error detection and correction enable" "Disabled,Enabled" group.quad spr:0x30542++0x00 line.quad 0x00 "ERXSTATUS_EL1,Selected Error Record Status Register" bitfld.quad 0x00 31. "AV,Address valid" "Not valid,?..." bitfld.quad 0x00 30. "V,Status register valid" "Not valid,Valid" bitfld.quad 0x00 29. "UE,Uncorrected Error" "No error,>=1 error" newline bitfld.quad 0x00 28. "ER,Error reported" "No error,Error" bitfld.quad 0x00 27. "OF,Error overflow" "No error,>1 error" bitfld.quad 0x00 26. "MV,Miscellaneous registers valid" "Not valid,Valid" newline bitfld.quad 0x00 24.--25. "CE,Corrected errors" "No error,Reserved,>=1 error,?..." bitfld.quad 0x00 23. "DE,Deferred errors" "No error,>=1 error" bitfld.quad 0x00 22. "PN,Poison" "No distinction,?..." newline bitfld.quad 0x00 20.--21. "UET,Uncorrected error type" "Uncontainable,?..." newline abitfld.quad 0x00 8.--15. "IERR,Implementation defined error code" "0x00=No error/Other RAMs,0x01=Error/L3 snoop RAM" abitfld.quad 0x00 0.--7. "SERR,Primary error code" "0x00=No error,0x02=ECC/internal data buffer,0x06=ECC/Cache data RAM,0x07=ECC/Cache tag/Dirty RAM,0x08=Parity/TLB data,0x09=Parity/TLB tag,0x15=Deferred not supported" rgroup.quad spr:0x30543++0x00 line.quad 0x00 "ERXADDR_EL1,Selected Error Record Address Register" group.quad spr:0x30550++0x00 line.quad 0x00 "ERXMISC0_EL1,Selected Error Record Miscellaneous Register 0" bitfld.quad 0x00 47. "OFO,Sticky overflow bit other" "No overflow,Overflow" hexmask.quad.byte 0x00 40.--46. 1. "CECO,Corrected error count other" bitfld.quad 0x00 39. "OFR,Sticky overflow bit repeat" "No overflow,Overflow" newline hexmask.quad.byte 0x00 32.--38. 1. "CECR,Repeat error count" bitfld.quad 0x00 28.--31. "WAY,Indicates the way that contained the error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.quad.word 0x00 6.--18. 1. "INDX,Indicates the index that contained the error" newline bitfld.quad 0x00 1.--3. "LVL,Indicates the level that contained the error" "level 1,Level 2,?..." bitfld.quad 0x00 0. "IND,Indicates the type of cache that contained the error" "L1 data/Unified L2/TLB,L1 instruction" group.quad spr:0x30551++0x00 line.quad 0x00 "ERXMISC1_EL1,Selected Error Record Miscellaneous Register 1" group.quad spr:0x30F22++0x00 line.quad 0x00 "ERXPFGCDN_EL1,Selected Error Pseudo Fault Generation Count Down Register" group.quad spr:0x30F21++0x00 line.quad 0x00 "ERXPFGCTL_EL1,Selected Error Pseudo Fault Generation Control Register" bitfld.quad 0x00 31. "CDNEN,Count down enable" "Disabled,Enabled" newline bitfld.quad 0x00 30. "R,Restart" "Stop,Reloaded" bitfld.quad 0x00 6. "CE,Corrected error generation enable" "Disabled,Enabled" newline bitfld.quad 0x00 5. "DE,Deferred Error generation enable" "Disabled,Enabled" bitfld.quad 0x00 3. "UER,Signaled or recoverable error generation enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "UC,Uncontainable error generation enable" "Disabled,Enabled" rgroup.quad spr:0x30F20++0x00 line.quad 0x00 "ERXPFGF_EL1,Selected Pseudo Fault Generation Feature Register" bitfld.quad 0x00 31. "PFG,Pseudo fault generation" "Not supported,Supported" bitfld.quad 0x00 30. "R,Error Generation Counter restart mode support" "Reserved,Supported" newline bitfld.quad 0x00 6. "CE,Corrected Error generation" "Not supported,Supported" bitfld.quad 0x00 5. "DE,Deferred error generation" "Not supported,Supported" newline bitfld.quad 0x00 4. "UEO,Latent or restartable error generation" "Not supported,?..." bitfld.quad 0x00 3. "UER,Signaled or recoverable error generation" "Not supported,Supported" newline bitfld.quad 0x00 2. "UEU,Unrecoverable error generation" "Not supported,?..." bitfld.quad 0x00 1. "UC,Uncontainable error generation" "Not supported,Supported" endif else rgroup.quad spr:0x30540++0x00 line.quad 0x00 "ERXFR_EL1,Error Record Feature Register" bitfld.quad 0x00 18.--19. "CEO,Corrected Error Overwrite" "Count CE,?..." bitfld.quad 0x00 16.--17. "DUI,Error recovery interrupt for deferred errors" "Not supported,?..." bitfld.quad 0x00 15. "RP,Repeat counter" "Reserved,Implemented" newline bitfld.quad 0x00 12.--14. "CEC,Corrected Error Counter" "Reserved,Reserved,8-bit,?..." bitfld.quad 0x00 10.--11. "CFI,Fault handling interrupt for corrected errors" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 8.--9. "UE,In-band uncorrected error reporting" "Reserved,Implemented,?..." newline bitfld.quad 0x00 6.--7. "FI,Fault handling interrupt" "Reserved,Reserved,Implemented,?..." bitfld.quad 0x00 4.--5. "UI,Error recovery interrupt for uncorrected errors" "Reserved,Enabled,Implemented,?..." bitfld.quad 0x00 2.--3. "DE,Defers errors" "Reserved,Enabled,?..." newline bitfld.quad 0x00 0.--1. "ED,Error detection and correction" "Reserved,Enabled,Implemented,?..." group.quad spr:0x30541++0x00 line.quad 0x00 "ERXCTLR_EL1,Selected Error Record Control Register" bitfld.quad 0x00 8. "CFI,Fault handling interrupt for corrected errors enable" "No interrupt,Interrupt" bitfld.quad 0x00 3. "FI,Fault handling interrupt enable" "No interrupt,Interrupt" bitfld.quad 0x00 2. "UI,Uncorrected error recovery interrupt enable" "No interrupt,Interrupt" newline bitfld.quad 0x00 0. "ED,Error detection and correction enable" "Disabled,Enabled" group.quad spr:0x30542++0x00 line.quad 0x00 "ERXSTATUS_EL1,Selected Error Record Status Register" bitfld.quad 0x00 31. "AV,Address valid" "Not valid,?..." bitfld.quad 0x00 30. "V,Status register valid" "Not valid,Valid" bitfld.quad 0x00 29. "UE,Uncorrected Error" "No error,>=1 error" newline bitfld.quad 0x00 28. "ER,Error reported" "No error,?..." bitfld.quad 0x00 27. "OF,Error overflow" "No error,>1 error" bitfld.quad 0x00 26. "MV,Miscellaneous registers valid" "Not valid,Valid" newline bitfld.quad 0x00 24.--25. "CE,Corrected errors" "No error,Reserved,>=1 error,?..." bitfld.quad 0x00 23. "DE,Deferred errors" "No error,>=1 error" bitfld.quad 0x00 22. "PN,Poison" "No distinction,Earlier" newline bitfld.quad 0x00 20.--21. "UET,Uncorrected error type" "Uncontainable,?..." newline bitfld.quad 0x00 8.--15. "IERR,Implementation defined error code" "No error/Other RAMs,Reserved,Error/L3 snoop RAM,?..." bitfld.quad 0x00 0.--7. "SERR,Primary error code" "No error,Reserved,ECC/internal data buffer,Reserved,Reserved,Reserved,ECC/Cache data RAM,ECC/Cache tag/Dirty RAM,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Bus error,?..." rgroup.quad spr:0x30543++0x00 line.quad 0x00 "ERXADDR_EL1,Selected Error Record Address Register" group.quad spr:0x30550++0x00 line.quad 0x00 "ERXMISC0_EL1,Selected Error Record Miscellaneous Register 0" bitfld.quad 0x00 47. "OFO,Sticky overflow bit other" "No overflow,Overflow" hexmask.quad.byte 0x00 40.--46. 1. "CECO,Corrected error count other" bitfld.quad 0x00 39. "OFR,Sticky overflow bit repeat" "No overflow,Overflow" newline hexmask.quad.byte 0x00 32.--38. 1. "CECR,Repeat error count" bitfld.quad 0x00 28.--31. "WAY,Indicates the way that contained the error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.quad.word 0x00 6.--18. 1. "INDX,Indicates the index that contained the error" newline bitfld.quad 0x00 1.--3. "LVL,Indicates the level that contained the error" "Reserved,Reserved,Level 3,?..." bitfld.quad 0x00 0. "IND,Indicates the type of cache that contained the error" "L3 cache,?..." group.quad spr:0x30551++0x00 line.quad 0x00 "ERXMISC1_EL1,Selected Error Record Miscellaneous Register 1" group.quad spr:0x30F22++0x00 line.quad 0x00 "ERXPFGCDN_EL1,Selected Error Pseudo Fault Generation Count Down Register" group.quad spr:0x30F21++0x00 line.quad 0x00 "ERXPFGCTL_EL1,Selected Error Pseudo Fault Generation Control Register" bitfld.quad 0x00 31. "CDNEN,Count down enable" "Disabled,Enabled" newline bitfld.quad 0x00 30. "R,Restart" "Stop,Reloaded" bitfld.quad 0x00 6. "CE,Corrected error generation" "Not generated,Generated" newline bitfld.quad 0x00 5. "DE,Deferred Error generation enable" "Not generated,Generated" bitfld.quad 0x00 1. "UC,Signaled or recoverable error generation enable" "Not supported,Controllable" rgroup.quad spr:0x30F20++0x00 line.quad 0x00 "ERXPFGF_EL1,Selected Pseudo Fault Generation Feature Register" bitfld.quad 0x00 31. "PFG,Pseudo fault generation" "Not supported,Supported" bitfld.quad 0x00 30. "R,Error Generation Counter restart mode support" "Reserved,Supported" newline bitfld.quad 0x00 6. "CE,Corrected Error generation" "Reserved,Supported" bitfld.quad 0x00 5. "DE,Deferred error generation" "Reserved,Supported" newline bitfld.quad 0x00 4. "UEO,Latent or restartable error generation" "Not supported,?..." bitfld.quad 0x00 3. "UER,Signaled or recoverable error generation" "Not supported,?..." newline bitfld.quad 0x00 2. "UEU,Unrecoverable error generation" "Not supported,?..." bitfld.quad 0x00 1. "UC,Uncontainable error generation" "Reserved,Supported" endif tree.end tree "Cluster PMU Registers" group.quad spr:0x30F50++0x00 line.quad 0x00 "CLUSTERPMCR_EL1,Cluster Performance Monitors Control Register (EL1)" hexmask.quad.byte 0x00 24.--31. 1. "IMP,Implementer code" hexmask.quad.byte 0x00 16.--23. 1. "IDCODE,Identification code" bitfld.quad 0x00 11.--15. "N,Number of counters implemented" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,6,?..." newline bitfld.quad 0x00 2. "C,Clock Counter Reset" "No reset,Reset" bitfld.quad 0x00 1. "P,Event Counter Reset" "No reset,Reset" newline bitfld.quad 0x00 0. "E,All Counters Enable" "Disabled,Enabled" group.quad spr:0x30F51++0x00 line.quad 0x00 "CLUSTERPMCNTENSET_EL1,Cluster Count Enable Set Register (EL1)" bitfld.quad 0x00 31. "C,Enables the cycle counter register [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.quad 0x00 5. "P5,Event counter PMN 5 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 4. "P4,Event counter PMN 4 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 3. "P3,Event counter PMN 3 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.quad 0x00 2. "P2,Event counter PMN 2 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 1. "P1,Event counter PMN 1 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 0. "P0,Event counter PMN 0 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" group.quad spr:0x30F52++0x00 line.quad 0x00 "CLUSTERPMCNTENCLR_EL1,Cluster Count Enable Clear Register (EL1)" bitfld.quad 0x00 31. "C,Disables the cycle counter register [Read/Write]" "Disabled/No effect,Enabled/Disable" newline bitfld.quad 0x00 5. "P5,Event counter PMN 5 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 4. "P4,Event counter PMN 4 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 3. "P3,Event counter PMN 3 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" newline bitfld.quad 0x00 2. "P2,Event counter PMN 2 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 1. "P1,Event counter PMN 1 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.quad 0x00 0. "P0,Event counter PMN 0 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" group.quad spr:0x30F53++0x00 line.quad 0x00 "CLUSTERPMOVSSET_EL1,Cluster Overflow Flag Status Set (EL1)" bitfld.quad 0x00 31. "C,PMCCNTR overflow bit [Read/Write]" "No overflow/No effect,Overflow/Set" newline bitfld.quad 0x00 5. "P5,PMN5 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.quad 0x00 4. "P4,PMN4 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.quad 0x00 3. "P3,PMN3 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" newline bitfld.quad 0x00 2. "P2,PMN2 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.quad 0x00 1. "P1,PMN1 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.quad 0x00 0. "P0,PMN0 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" group.quad spr:0x30F54++0x00 line.quad 0x00 "CLUSTERPMOVSCLR_EL1,Cluster Overflow Flag Status Clear (EL1)" eventfld.quad 0x00 31. "C,PMCCNTR overflow bit [Read/Write]" "No overflow/No effect,Overflow/Clear" newline eventfld.quad 0x00 5. "P5,PMN5 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.quad 0x00 4. "P4,PMN4 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.quad 0x00 3. "P3,PMN3 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" newline eventfld.quad 0x00 2. "P2,PMN2 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.quad 0x00 1. "P1,PMN1 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.quad 0x00 0. "P0,PMN0 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" group.quad spr:0x30F55++0x00 line.quad 0x00 "CLUSTERPMSELR_EL1,Cluster Event Counter Selection Register (EL1)" bitfld.quad 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.quad spr:0x30F56++0x00 line.quad 0x00 "CLUSTERPMINTENSET_EL1,Cluster Interrupt Enable Set Register (EL1)" bitfld.quad 0x00 31. "C,PMCCNTR Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" group.quad spr:0x30F57++0x00 line.quad 0x00 "CLUSTERPMINTENCLR_EL1,Cluster Interrupt Enable Clear Register (EL1)" eventfld.quad 0x00 31. "C,PMCCNTR Overflow Interrupt Request Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" newline eventfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" newline eventfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" if (((per.q(spr:0x30F55))&0x1F)<=0x05) if (((per.q(spr:0x30F61))&0x80000000)==0x00) group.quad spr:0x30F61++0x00 line.quad 0x00 "CLUSTERPMXEVTYPER_EL1,Cluster Selected Event Type and Filter Register (EL1)" bitfld.quad 0x00 31. "S,Count events in EL1 disable" "No,Yes" bitfld.quad 0x00 29. "NS,Count events in non-secure EL2 disable" "No,Yes" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" else group.quad spr:0x30F61++0x00 line.quad 0x00 "CLUSTERPMXEVTYPER_EL1,Cluster Selected Event Type and Filter Register (EL1)" bitfld.quad 0x00 31. "S,Count events in EL1 disable" "No,Yes" bitfld.quad 0x00 29. "NS,Count events in non-secure EL2 disable" "Yes,No" newline hexmask.quad.word 0x00 0.--15. 1. "EVTCOUNT,Event number" endif else rgroup.quad spr:0x30F61++0x00 line.quad 0x00 "CLUSTERPMXEVTYPER_EL1,Cluster Selected Event Type and Filter Register (EL1)" endif group.quad spr:0x30F62++0x00 line.quad 0x00 "CLUSTERPMXEVCNTR_EL1,Cluster Selected Event Counter Register (EL1)" tree.open "Common Event Identification Registers" rgroup.quad spr:0x30F64++0x00 line.quad 0x00 "CLUSTERPMCEID0_EL1,Cluster Common Event Identification ID0 Register (EL1)" bitfld.quad 0x00 30. "CHAIN,Chain" "Reserved,Implemented" bitfld.quad 0x00 29. "BUS_CYCLES,Bus cycle" "Reserved,Implemented" bitfld.quad 0x00 26. "MEMORY_ERROR,Local memory error" "Reserved,Implemented" newline bitfld.quad 0x00 25. "BUS_ACCESS,Bus access" "Reserved,Implemented" bitfld.quad 0x00 17. "CPU_CYCLES,CPU Cycle" "Reserved,Implemented" rgroup.quad spr:0x30F65++0x00 line.quad 0x00 "CLUSTERPMCEID1_EL1,Cluster Common Event Identification ID1 Register (EL1)" bitfld.quad 0x00 12. "L3D_CACHE_WB,Attributable Level 3 data or unified cache write-back" "Reserved,Implemented" bitfld.quad 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Reserved,Implemented" bitfld.quad 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Reserved,Implemented" newline bitfld.quad 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Reserved,Implemented" tree.end newline group.quad spr:0x30F66++0x00 line.quad 0x00 "CLUSTERPMCLAIMSET_EL1,Cluster Performance Monitor Claim Tag Set Register (EL1)" bitfld.quad 0x00 3. "S[3],Set bit 3 [Read/Write]" "Not implemented/No effect,Implemented/Set" bitfld.quad 0x00 2. "S[2],Set bit 2 [Read/Write]" "Not implemented/No effect,Implemented/Set" bitfld.quad 0x00 1. "S[1],Set bit 1 [Read/Write]" "Not implemented/No effect,Implemented/Set" newline bitfld.quad 0x00 0. "S[0],Set bit 0 [Read/Write]" "Not implemented/No effect,Implemented/Set" group.quad spr:0x30F67++0x00 line.quad 0x00 "CLUSTERPMCLAIMCLR_EL1,Cluster Performance Monitor Claim Tag Clear Register (EL1)" bitfld.quad 0x00 3. "C[3],Clear bit 3 [Read/Write]" "Not implemented/No effect,Implemented/Set" bitfld.quad 0x00 2. "C[2],Clear bit 2 [Read/Write]" "Not implemented/No effect,Implemented/Set" bitfld.quad 0x00 1. "C[1],Clear bit 1 [Read/Write]" "Not implemented/No effect,Implemented/Set" newline bitfld.quad 0x00 0. "C[0],Clear bit 0 [Read/Write]" "Not implemented/No effect,Implemented/Set" tree.end tree.end tree.end tree.open "AArch32" tree "ID Registers" rgroup.long c15:0x0010++0x00 line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 28.--31. "RAS,RAS extension version" "Reserved,Version 1,?..." newline bitfld.long 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..." bitfld.long 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Trivial,?..." bitfld.long 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,After Thumb-2,?..." newline bitfld.long 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..." rgroup.long c15:0x0110++0x00 line.long 0x00 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..." newline bitfld.long 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..." newline bitfld.long 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." rgroup.long c15:0x0310++0x00 line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" rgroup.long c15:0x0410++0x00 line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,HW coherency,?..." bitfld.long 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..." bitfld.long 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Reserved,Control/Fault Status,?..." newline bitfld.long 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..." bitfld.long 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..." bitfld.long 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,HW coherency,?..." newline bitfld.long 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..." bitfld.long 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,VMSAv7/PXN/L-DESC,?..." rgroup.long c15:0x0510++0x00 line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1" bitfld.long 0x00 28.--31. "BTB,Branch Predictor" "Reserved,Reserved,Reserved,Reserved,No flushing,?..." bitfld.long 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." newline bitfld.long 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." newline bitfld.long 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." newline bitfld.long 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." newline bitfld.long 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup.long c15:0x0610++0x00 line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..." bitfld.long 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,DSB/ISB/DMB,?..." newline bitfld.long 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,S2 operations,?..." newline bitfld.long 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." newline bitfld.long 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." rgroup.long c15:0x0710++0x00 line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3" bitfld.long 0x00 28.--31. "SS,Supersection support" "Supported,?..." bitfld.long 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..." bitfld.long 0x00 20.--23. "CW,Coherent walk" "Reserved,Not required,?..." newline bitfld.long 0x00 16.--19. "PAN,Privileged Access Never Support" "Reserved,Reserved,Extended,?..." bitfld.long 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Shareability/Defined behavior,?..." bitfld.long 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Invalidate All/VA,?..." newline bitfld.long 0x00 4.--7. "CMSW,Cache maintenance by set/way" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. "CMMVA,Cache maintenance by MVA" "Reserved,Supported,?..." rgroup.long c15:0x0620++0x00 line.long 0x00 "ID_MMFR4,Memory Model Feature Register 4" bitfld.long 0x00 20.--23. "LSM,LSMAOE and NTLSMD bits support" "Not supported,?..." bitfld.long 0x00 16.--19. "HD,Hierarchical Permission Disables Support" "Reserved,Reserved,Extended,?..." bitfld.long 0x00 12.--15. "CNP,Common not Private support" "Reserved,Supported,?..." newline bitfld.long 0x00 8.--11. "XNX,EL0/EL1 execute control distinction at stage2 bit support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. "AC2,Indicates the extension of the HACTLR Register using HACTLR2" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. "SPECSEI,Describes whether the PE can generate SError interrupt exceptions" "Not possible,?..." rgroup.long c15:0x0020++0x00 line.long 0x00 "ID_ISAR0,ID_ISAR0" bitfld.long 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,T32/A32,?..." bitfld.long 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..." newline bitfld.long 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..." rgroup.long c15:0x0120++0x00 line.long 0x00 "ID_ISAR1,ID_ISAR1" bitfld.long 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,A32-BX like,?..." bitfld.long 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Full support,?..." bitfld.long 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0220++0x00 line.long 0x00 "ID_ISAR2,ID_ISAR2" bitfld.long 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 24.--27. "PSRI,PSR Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,UMAAL,?..." newline bitfld.long 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." newline bitfld.long 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..." newline bitfld.long 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,PLD/PLI/PLDW,?..." bitfld.long 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.long c15:0x0320++0x00 line.long 0x00 "ID_ISAR3,ID_ISAR3" bitfld.long 0x00 28.--31. "T32EE,Thumb-EE Extensions Support" "Not supported,?..." bitfld.long 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0420++0x00 line.long 0x00 "ID_ISAR4,ID_ISAR4" bitfld.long 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..." bitfld.long 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..." bitfld.long 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..." newline bitfld.long 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.long c15:0x0520++0x00 line.long 0x00 "ID_ISAR5,Instruction Set Attribute Register 5" bitfld.long 0x00 24.--27. "RDM,Rounding Double Multiply Add/Subtract instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. "CRC32,Indicates whether CRC32 instructions are implemented in AArch32 state" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "SHA2,Indicates whether SHA2 instructions are implemented in AArch32 state" "Not supported,Supported,?..." newline bitfld.long 0x00 8.--11. "SHA1,Indicates whether SHA1 instructions are implemented in AArch32 state" "Not supported,Supported,?..." bitfld.long 0x00 4.--7. "AES,Indicates whether AES instructions are implemented in AArch32 state" "Not supported,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "SEVL,Indicates whether SEVL instruction is implemented in AArch32" "Reserved,Supported,?..." rgroup.long c15:0x0720++0x00 line.long 0x00 "ID_ISAR6,Instruction Set Attribute Register 6" bitfld.long 0x00 4.--7. "DP,Indicates UDOT and SDOT instructions in AArch32 state" "Reserved,Implemented,?..." rgroup.long c15:0x0210++0x00 line.long 0x00 "ID_DFR0,Debug Feature Register" bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Reserved,Supported/16bit evtCount,?..." bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..." bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..." newline bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..." bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Support v8.2,?..." newline bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Support v8.2,?..." rgroup.long c15:0x0000++0x00 line.long 0x00 "MIDR,Main ID Register" hexmask.long.byte 0x0 24.--31. 1. "IMPL,Implementer code" bitfld.long 0x00 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "ARCH, Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,CPUID scheme" newline hexmask.long.word 0x00 4.--15. 1. "PART,Primary Part Number" bitfld.long 0x00 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long c15:0x0200++0x00 line.long 0x00 "TCMTR,TCM Type Register" rgroup.long c15:0x0300++0x00 line.long 0x00 "TLBTR,TLB Type Register" bitfld.long 0x00 0. "NU,Not Unified TLB" "Unified TLB,Separate Instruction and Data TLBs" rgroup.long c15:0x0500++0x00 line.long 0x00 "MPIDR,Multiprocessor Affinity Register" bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,?..." bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Not implemented,Implemented" newline hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Identifies different clusters within the system" bitfld.long 0x00 8.--15. "AFF1,Affinity level 1. Identifies individual cores within the local FCM cluster" "CORE0,CORE1,CORE2,CORE3,CORE4,CORE5,CORE6,CORE7,?..." hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Identifies individual threads within a multi-threaded core" rgroup.long c15:0x0600++0x00 line.long 0x00 "REVIDR,Revision ID Register" rgroup.long c15:0x1700++0x00 line.long 0x00 "AIDR,Auxiliary ID Register" tree.end tree "System Control and Configuration" group.long c15:0x0001++0x00 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x00 30. "TE,T32 exception enable" "A32,T32" bitfld.long 0x00 29. "AFE,Access Flag Enable" "Disabled,Enabled" newline bitfld.long 0x00 28. "TRE,TEX remap enable" "Disabled,Enabled" bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x00 23. "SPAN,Set Privileged Access Never" "Disabled,Enabled" bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.long 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" bitfld.long 0x00 18. "NTWE,Not trap WFE" "No,Yes" newline bitfld.long 0x00 16. "NTWI,Not trap WFI" "No,Yes" bitfld.long 0x00 13. "V,Base Location of Exception Registers" "VBAR value,0xFFFF0000" newline bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes" newline bitfld.long 0x00 5. "CP15BEN,C15 Barrier Enable" "Disabled,Enabled" bitfld.long 0x00 4. "LSMAOE,Load/Store Multiple Atomicity and Ordering Enable" "Reserved,Enabled" newline bitfld.long 0x00 3. "NTLSMD,No Trap Load/Store Multiple to Device-nGRE/Device-nGnRE/Device-nGnRnE memory" "Reserved,No Trap" bitfld.long 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x00 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" rgroup.quad c15:0x100F0++0x01 line.quad 0x00 "CPUACTLR,CPU Auxiliary Control Register" if corename()=="CORTEXA75" rgroup.quad c15:0x10F11++0x01 line.quad 0x00 "CPUACTLR2,CPU Auxiliary Control Register 2" endif if corename()=="CORTEXA75" group.quad c15:0x140F0++0x01 line.quad 0x00 "CPUECTLR,CPU Extended Control Register" bitfld.quad 0x00 22.--23. "L4_STREAM,Threshold for direct stream to L4 cache on store" "512KB,1024KB,2048KB,Disabled" bitfld.quad 0x00 20.--21. "L3_STREAM,Threshold for direct stream to L3 cache on store" "64KB,256KB,512KB,Disabled" newline bitfld.quad 0x00 18.--19. "L2_STREAM,Threshold for direct stream to L2 cache on store" "16KB,64KB,128KB,Disabled" bitfld.quad 0x00 10. "L3PF,Enable L3 prefetch requests sent by the stride prefetcher" "Disabled,Enabled" newline bitfld.quad 0x00 9. "L2PF,Enable L2 prefetch requests sent by the stride prefetcher" "Disabled,Enabled" bitfld.quad 0x00 8. "L1PF,Enable L1 prefetch requests sent by the stride prefetcher" "Disabled,Enabled" newline bitfld.quad 0x00 7. "RPF,Enable L2 region prefetch requests" "Disabled,Enabled" bitfld.quad 0x00 6. "MMUPF,Enable MMU prefetch requests" "Disabled,Enabled" newline bitfld.quad 0x00 5. "RPF_AGGRO,L2 region prefetcher aggressivity" "Longer,Shorter" bitfld.quad 0x00 1. "RNSD_EXCL,Enables signaling of cacheable Exclusive loads on the internal interface between the core and the DSU" "Not use,Use" newline bitfld.quad 0x00 0. "EXTLLC,Type of last-level cache that is present in the system" "Internal,External" elif corename()=="CORTEXA55" group.quad c15:0x140F0++0x01 line.quad 0x00 "CPUECTLR,CPU Extended Control Register" bitfld.quad 0x00 38.--39. "ATOM,Force most cacheable atomic instructions to be executed far in the L3 cache or beyond and near in the L1 cache" "Near - hit/unique | Far - miss/shared,Near,Far,Near - load | Far - store" bitfld.quad 0x00 37. "L2FLUSH,L2 cache flush" "Enabled,Disabled" newline bitfld.quad 0x00 29.--30. "L3WSCTL,Write streaming no-L3-allocate threshold" "128th line,1024th line,4096th line,Disabled" bitfld.quad 0x00 27.--28. "L2WSCTL,Write streaming no-L2-allocate threshold" "16th line,128th line,512th line,Disabled" newline bitfld.quad 0x00 25.--26. "L1WSCTL,Write streaming no-L1-allocate threshold" "4th line,64th line,128th line,Disabled" bitfld.quad 0x00 13.--15. "L1PCTL,L1 Data prefetch control. Maximum number of outstanding data prefetches allowed in the L1 memory system" "Prefetch disabled,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--12. "L3PCTL,L3 Data prefetch control. Maximum number of outstanding data prefetches allowed that can be sent to the L3 memory system" "16 lines,32 lines,Reserved,Reserved,Disabled,2 lines,4 lines,8 lines" bitfld.quad 0x00 0. "EXTLLC,Type of last-level cache that is present in the system" "Internal,External" endif rgroup.long c15:0x608F++0x00 line.long 0x00 "CPUPSELR,CPU Private Selection Register" rgroup.quad c15:0x618F++0x01 line.quad 0x00 "CPUPCR,CPU Private Control Register" rgroup.quad c15:0x638F++0x01 line.quad 0x00 "CPUPMR,CPU Private Mask Register" rgroup.quad c15:0x628F++0x01 line.quad 0x00 "CPUPOR,CPU Private Operation Register" group.long c15:0x0101++0x00 line.long 0x00 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 12. "CLUSTERPMUEN,Performance Management Registers access control" "Not accessible,Accessible" bitfld.long 0x00 11. "SMEN,Scheme Management Registers access control" "Not accessible,Accessible" newline bitfld.long 0x00 10. "TSIDEN,Thread Scheme ID Register enable" "Not accessible,Accessible" bitfld.long 0x00 7. "PWREN,Power Control Registers access control" "Not accessible,Accessible" newline bitfld.long 0x00 5. "ERXPFGEN,Error Record Registers access control" "Not accessible,Accessible" bitfld.long 0x00 1. "ECTLREN, Extended Control Registers access control" "Not accessible,Accessible" newline bitfld.long 0x00 0. "ACTLREN,Auxiliary Control Registers access control" "Not accessible,Accessible" rgroup.long c15:0x0301++0x00 line.long 0x00 "ACTLR2,Auxiliary Control Register 2" group.long c15:0x0201++0x00 line.long 0x00 "CPACR,Coprocessor Access Control Register 1" bitfld.long 0x00 31. "ASEDIS,Disable Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x00 22.--23. "CP11,Coprocessor access control" "Denied,Privileged,Reserved,Full" newline bitfld.long 0x00 20.--21. "CP10,Coprocessor access control" "Denied,Privileged,Reserved,Full" group.long c15:0x0011++0x00 line.long 0x00 "SCR,Secure Configuration Register" bitfld.long 0x00 13. "TWE,Traps WFE instructions to Monitor mode" "No trap,Trap" bitfld.long 0x00 12. "TWI,Traps WFI instructions to Monitor mode" "No trap,Trap" newline bitfld.long 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted" bitfld.long 0x00 8. "HCE,Hypervisor Call instruction enable" "No,Yes" newline bitfld.long 0x00 7. "SCD,Secure Monitor Call disable" "No,Yes" bitfld.long 0x00 6. "NET,Disables early termination" "Enabled,Disabled" newline bitfld.long 0x00 5. "AW,Controls whether the Non-secure world can modify the A-bit in the CPSR" "Not allowed,Allowed" bitfld.long 0x00 4. "FW,Controls whether the Non-secure world can modify the F-bit in the CPSR" "Not allowed,Allowed" newline bitfld.long 0x00 3. "EA,External Abort exceptions handled in Abort mode or Monitor mode" "Abort,Monitor" bitfld.long 0x00 2. "FIQ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor" newline bitfld.long 0x00 1. "IRQ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor" bitfld.long 0x00 0. "NS,Secure mode " "Secure,Non-secure" group.long c15:0x0111++0x00 line.long 0x00 "SDER,Secure Debug Enable Register" bitfld.long 0x00 1. "SUNIDEN,Secure User Non-Invasive Debug Enable" "Disabled,Enabled" bitfld.long 0x00 0. "SUIDEN,Secure User Invasive Debug Enable" "Disabled,Enabled" group.long c15:0x0131++0x00 line.long 0x00 "SDCR,Secure Debug Control Register" bitfld.long 0x00 21. "EPMAD,External debugger access to Performance Monitors Registers disabled" "No,Yes" bitfld.long 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint Registers disabled" "No,Yes" newline bitfld.long 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled" bitfld.long 0x00 14.--15. "SPD,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled" group.long c15:0x0211++0x00 line.long 0x00 "NSACR,Non-Secure Access Control Register" bitfld.long 0x00 15. "NSASEDIS,Disable Non-secure Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x00 11. "CP11,Coprocessor 11 in the Non-secure World Access Permission" "Denied,Permitted" newline bitfld.long 0x00 10. "CP10,Coprocessor 10 in the Non-secure World Access Permission" "Denied,Permitted" group.long c15:0x000C++0x00 line.long 0x00 "VBAR,Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address" group.long c15:0x010C++0x00 line.long 0x00 "MVBAR,Monitor Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 "MVBADDR,Monitor Vector Base Address" rgroup.long c15:0x001C++0x00 line.long 0x00 "ISR,Interrupt Status Register" bitfld.long 0x00 8. "A,Asynchronous external abort pending bit" "Not pending,Pending" bitfld.long 0x00 7. "I,IRQ pending bit" "Not pending,Pending" newline bitfld.long 0x00 6. "F,FIQ pending bit" "Not pending,Pending" group.long c15:0x020C++0x00 line.long 0x00 "RMR,Reset Management Register" bitfld.long 0x00 1. "RR,Reset Request" "Not requested,Requested" bitfld.long 0x00 0. "AA64,Determines which execution state the processor boots into after a warm reset" "AArch32,AArch64" if corename()=="CORTEXA75" rgroup.long c15:0x010C++0x00 line.long 0x00 "RVBAR,Reset Vector Base Address Register" hexmask.long 0x00 2.--31. 0x4 "RA,Reset Address" endif rgroup.long c15:0x0015++0x00 line.long 0x00 "ADFSR,Auxiliary Data Fault Status Register" rgroup.long c15:0x0115++0x00 line.long 0x00 "AIFSR,Auxiliary Instruction Fault Status Register" if corename()=="CORTEXA75" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Uncorrected/Unrecoverable,?..." newline bitfld.long 0x00 13. "CM,Cache maintenance fault" "No fault,Fault" bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 4.--7. "DOMAIN,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15" newline bitfld.long 0x00 0.--3. 10. "FS,Generated Exception Type" "Reserved,Alignment,Debug,Access flag/L1,Instruction,Translation/L1,Access flag/L2,Translation/L1,Sync. external,Domain/L1,Reserved,Domain/L2,Sync. external/on TTW/L1,Permission/L1,Sync. external/on TTW/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,SError,Reserved,SError/ECC on memory access,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 12. "EXT,External Abort Qualifier" "0,1" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 0.--3. 10. "FS,Fault status bits" "Reserved,Alignment,Debug,Access flag/L1,Reserved,Translation/L1,Access flag/L2,Translation/L2,Sync. external,Domain/L1,Reserved,Domain/L2,Sync. external/on TTW/L1,Permission/L1,Sync. external/on TTW/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." else group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Uncorrected/Unrecoverable,?..." newline bitfld.long 0x00 13. "CM,Cache maintenance fault" "No fault,Fault" bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 0.--5. "STATUS,Fault status bits" "Address size/TTBR0/TTBR1,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Async. SError,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity error/ECC on TTW/L2,Sync. parity error/ECC on TTW/L3,Reserved,Alignment,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,?..." group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 12. "EXT,External Abort Qualifier" "0,1" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 0.--5. "STATUS,Fault status bits" "Address size/TTBR0/TTBR1,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity/ECC on TTW/L2,Sync. parity/ECC on TTW/L3,Reserved,Alignment,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif elif corename()=="CORTEXA55" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" ",Uncorrected/Unrecoverable,?..." newline bitfld.long 0x00 13. "CM,Cache maintenance fault" "No fault,Fault" bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 4.--7. "DOMAIN,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15" newline bitfld.long 0x00 0.--3. 10. "FS,Fault status bits" "Reserved,Alignment,Debug,Access flag/L1,Reserved,Translation/L1,Access flag/L2,Translation/L2,Sync. external,Domain/L1,Reserved,Domain/L2,Sync. external/on TTW/L1,Permission/L1,Sync. external/on TTW/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 12. "EXT,External Abort Qualifier" "0,1" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/L1,Permission/section,Sync. external/on TTW/L2,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/L1,Reserved,Sync. parity/on TTW/L2,?..." else group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" ",Uncorrected/Unrecoverable,?..." newline bitfld.long 0x00 13. "CM,Cache maintenance fault" "No fault,Fault" bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 0.--5. "STATUS,Fault status bits" "Address size/TTBR0/TTBR1,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Async. SError,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity error/ECC on TTW/L2,Sync. parity error/ECC on TTW/L3,Reserved,Alignment,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,?..." group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 16. "FNV,FAR not Valid" "Valid,Not valid" bitfld.long 0x00 12. "EXT,External Abort Qualifier" "0,1" newline bitfld.long 0x00 9. "LPAE,Descriptor translation table format" "Short,Long" bitfld.long 0x00 0.--5. "STATUS,Fault status bits" "Address size/TTBR0/TTBR1,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity/ECC on TTW/L2,Sync. parity/ECC on TTW/L3,Reserved,Alignment,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." endif endif group.long c15:0x0006++0x00 line.long 0x00 "DFAR,Data Fault Address Register" group.long c15:0x0206++0x00 line.long 0x00 "IFAR,Instruction Fault Address Register" rgroup.long c15:0x000D++0x00 line.long 0x00 "FCSEIDR,FCSE PID Register" group.long c15:0x020D++0x00 line.long 0x00 "TPIDRURW,PL0 Read/Write Software Thread ID Register" group.long c15:0x030D++0x00 line.long 0x00 "TPIDRURO,PL0 Read-Only Software Thread ID Register" group.long c15:0x040D++0x00 line.long 0x00 "TPIDRPRW,PL1 Software Thread ID Register" if corename()=="CORTEXA75" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x011C++0x00 line.long 0x00 "DISR,Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,Long-descriptor" bitfld.long 0x00 0.--3. 10. "FS,Fault Status Code" "Reserved,Alignment,Debug,Access/L1,Instruction,Translation/L1,Access/L2,Translation/L2,Non-translation/sync. external,Domain/L1,Reserved,Domain/L2,L1/external,Permission/L1,L2/external,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,SError interrupt,Reserved,SError interrupt parity/ECC on memory access,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." else group.long c15:0x011C++0x00 line.long 0x00 "DISR,Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,Long-descriptor" bitfld.long 0x00 0.--5. "STATUS,Fault Status Code" "Address size/TTBR0/TTBR1,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,SError interrupt,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/on memory access,SError interrupt/a parity or ECC/on memory access,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/L1,Sync. parity/on memory access/on TTW/L2,Sync. parity/on memory access/on TTW/L3,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,?..." endif elif corename()=="CORTEXA55" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x011C++0x00 line.long 0x00 "DISR,Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,Long-descriptor" bitfld.long 0x00 0.--3. 10. "FS,Fault Status Code" "Reserved,Alignment,Debug,Access/L1,Instruction,Translation/L1,Access/L2,Translation/L2,Non-translation/sync. external,Domain/L1,Reserved,Domain/L2,L1/external,Permission/L1,L2/external,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,SError interrupt,Reserved,SError interrupt parity/ECC on memory access,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." else group.long c15:0x011C++0x00 line.long 0x00 "DISR,Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,Long-descriptor" bitfld.long 0x00 0.--5. "STATUS,Fault Status Code" "Address size/TTBR0/TTBR1,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation fault/L2,Translation fault/L3,Reserved,Access flag fault/L1,Access flag fault/L2,Access flag fault/L3,Reserved,Permission fault/L1,Permission fault/L2,Permission fault/L3,Sync. external,SError interrupt,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/on memory access,SError interrupt/parity or ECC/on memory access,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/L1,Sync. parity/on memory access/on TTW/L2,Sync. parity/on memory access/on TTW/L3,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Lockdown,Unsupp exclusive access,?..." endif endif if corename()=="CORTEXA75" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x411C++0x00 line.long 0x00 "VDISR,Virtual Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,Long-descriptor" bitfld.long 0x00 0.--3. 10. "FS,Fault Status Code" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async SError interrupt,?..." else group.long c15:0x411C++0x00 line.long 0x00 "VDISR,Virtual Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "UC/Uncontainable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,Long-descriptor" bitfld.long 0x00 0.--5. "STATUS,Fault Status Code" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async SError interrupt,?..." endif elif corename()=="CORTEXA55" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x411C++0x00 line.long 0x00 "VDISR,Virtual Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." newline bitfld.long 0x00 9. "LPAE,Format" "Short-descriptor,?..." bitfld.long 0x00 0.--3. 10. "FS,Fault Status Code" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async SError interrupt,?..." else group.long c15:0x411C++0x00 line.long 0x00 "VDISR,Virtual Deferred Interrupt Status Register" bitfld.long 0x00 31. "A,Asynchronous SError interrupt deferred" "No,Yes" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." newline bitfld.long 0x00 9. "LPAE,Format" ",Long-descriptor" bitfld.long 0x00 0.--5. "STATUS,Fault Status Code" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async SError interrupt,?..." endif endif group.long c15:0x4325++0x00 line.long 0x00 "VDFSR,Virtual SError Exception Syndrome Register" bitfld.long 0x00 14.--15. "AET,Asynchronous Error Type" "Reserved,UEU/Unrecoverable,?..." tree "System Instructions" wgroup.long c15:0x0068++0x00 line.long 0x00 "DTLBIALL,DTLBIALL" wgroup.long c15:0x0268++0x00 line.long 0x00 "DTLBIASID,DTLBIASID" wgroup.long c15:0x0168++0x00 line.long 0x00 "DTLBIMVA,DTLBIMVA" wgroup.long c15:0x0058++0x00 line.long 0x00 "ITLBIALL,ITLBIALL" wgroup.long c15:0x0258++0x00 line.long 0x00 "ITLBIASID,ITLBIASID" wgroup.long c15:0x0158++0x00 line.long 0x00 "ITLBIMVA,ITLBIMVA" wgroup.long c15:0x05A7++0x00 line.long 0x00 "CP15DMB,CP15DMB" wgroup.long c15:0x04A7++0x00 line.long 0x00 "CP15DSB,CP15DSB" wgroup.long c15:0x0457++0x00 line.long 0x00 "CP15ISB,CP15ISB" wgroup.long c15:0x0657++0x00 line.long 0x00 "BPIALL,BPIALL" wgroup.long c15:0x0617++0x00 line.long 0x00 "BPIALLIS,BPIALLIS" wgroup.long c15:0x0757++0x00 line.long 0x00 "BPIMVA,BPIMVA" wgroup.long c15:0x0017++0x00 line.long 0x00 "ICIALLUIS,ICIALLUIS" wgroup.long c15:0x0057++0x00 line.long 0x00 "ICIALLU,ICIALLU" wgroup.long c15:0x0157++0x00 line.long 0x00 "ICIMVAU,ICIMVAU" wgroup.long c15:0x3147++0x00 line.long 0x00 "DCZVA,DCZVA" wgroup.long c15:0x0167++0x00 line.long 0x00 "DCIMVAC,DCIMVAC" wgroup.long c15:0x0267++0x00 line.long 0x00 "DCISW,DCISW" wgroup.long c15:0x01A7++0x00 line.long 0x00 "DCCMVAC,DCCMVAC" wgroup.long c15:0x02A7++0x00 line.long 0x00 "DCCSW,DCCSW" wgroup.long c15:0x01B7++0x00 line.long 0x00 "DCCMVAU,DCCMVAU" wgroup.long c15:0x01E7++0x00 line.long 0x00 "DCCIMVAC,DCCIMVAC" wgroup.long c15:0x02E7++0x00 line.long 0x00 "DCCISW,DCCISW" wgroup.long c15:0x0087++0x00 line.long 0x00 "ATS1CPR,ATS1CPR" wgroup.long c15:0x0097++0x00 line.long 0x00 "ATS1CPRP,ATS1CPRP" wgroup.long c15:0x0187++0x00 line.long 0x00 "ATS1CPW,ATS1CPW" wgroup.long c15:0x0197++0x00 line.long 0x00 "ATS1CPWP,ATS1CPWP" wgroup.long c15:0x0287++0x00 line.long 0x00 "ATS1CUR,ATS1CUR" wgroup.long c15:0x0387++0x00 line.long 0x00 "ATS1CUW,ATS1CUW" wgroup.long c15:0x0487++0x00 line.long 0x00 "ATS12NSOPR,ATS12NSOPR" wgroup.long c15:0x0587++0x00 line.long 0x00 "ATS12NSOPW,ATS12NSOPW" wgroup.long c15:0x0687++0x00 line.long 0x00 "ATS12NSOUR,ATS12NSOUR" wgroup.long c15:0x0787++0x00 line.long 0x00 "ATS12NSOUW,ATS12NSOUW" wgroup.long c15:0x4087++0x00 line.long 0x00 "ATS1HR,ATS1HR" wgroup.long c15:0x4187++0x00 line.long 0x00 "ATS1HW,ATS1HW" ; Commented Registers are not described in ARMv8 reference manual (DDI0407A) ; wgroup.long c15:0x6087++0x00 ; line.long 0x00 "ATS1E3R,ATS1E3R" ; wgroup.long c15:0x6187++0x00 ; line.long 0x00 "ATS1E3W,ATS1E3W" wgroup.long c15:0x0078++0x00 line.long 0x00 "TLBIALL,TLBIALL" wgroup.long c15:0x0178++0x00 line.long 0x00 "TLBIMVA,TLBIMVA" wgroup.long c15:0x4178++0x00 line.long 0x00 "TLBIMVAH,Invalidate Hypervisor unified TLB entry by MVA" wgroup.long c15:0x0278++0x00 line.long 0x00 "TLBIASID,TLBIASID" wgroup.long c15:0x0378++0x00 line.long 0x00 "TLBIMVAA,TLBIMVAA" wgroup.long c15:0x0578++0x00 line.long 0x00 "TLBIMVAL,TLBIMVAL" wgroup.long c15:0x0778++0x00 line.long 0x00 "TLBIMVAAL,TLBIMVAAL" wgroup.long c15:0x0038++0x00 line.long 0x00 "TLBIALLIS,TLBIALLIS" wgroup.long c15:0x0138++0x00 line.long 0x00 "TLBIMVAIS,TLBIMVAIS" wgroup.long c15:0x0238++0x00 line.long 0x00 "TLBIASIDIS,TLBIASIDIS" wgroup.long c15:0x0338++0x00 line.long 0x00 "TLBIMVAAIS,TLBIMVAAIS" wgroup.long c15:0x0538++0x00 line.long 0x00 "TLBIMVALIS,TLBIMVALIS" wgroup.long c15:0x0738++0x00 line.long 0x00 "TLBIMVAALI,TLBIMVAALI" wgroup.long c15:0x4108++0x00 line.long 0x00 "TLBIIPAS2IS,TLBIIPAS2IS" wgroup.long c15:0x4508++0x00 line.long 0x00 "TLBIIPAS2LIS,TLBIIPAS2LIS" wgroup.long c15:0x4148++0x00 line.long 0x00 "TLBIIPAS2,TLBIIPAS2" wgroup.long c15:0x4548++0x00 line.long 0x00 "TLBIIPAS2L,TLBIIPAS2L" wgroup.long c15:0x4178++0x00 line.long 0x00 "TLBIIPAS2L,TLBIIPAS2L" wgroup.long c15:0x4578++0x00 line.long 0x00 "TLBIMVALH,TLBIMVALH" ; wgroup.long c15:0x4678++0x00 ; line.long 0x00 "TLBIVMALLS12E1,TLBIVMALLS12E1" wgroup.long c15:0x4138++0x00 line.long 0x00 "TLBIMVAHIS,TLBIMVAHIS" wgroup.long c15:0x4538++0x00 line.long 0x00 "TLBIMVALHIS,TLBIMVALHIS" ; wgroup.long c15:0x4638++0x00 ; line.long 0x00 "TLBIVMALLS12E1IS,TLBIVMALLS12E1IS" ; wgroup.long c15:0x6178++0x00 ; line.long 0x00 "TLBIVAE3,TLBIVAE3" ; wgroup.long c15:0x6578++0x00 ; line.long 0x00 "TLBIVALE3,TLBIVALE3" ; wgroup.long c15:0x6138++0x00 ; line.long 0x00 "TLBIVAE3IS,TLBIVAE3IS" ; wgroup.long c15:0x6538++0x00 ; line.long 0x00 "TLBIVALE3IS,TLBIVALE3IS" wgroup.long c15:0x4078++0x00 line.long 0x00 "TLBIALLH,TLBIALLH" wgroup.long c15:0x4038++0x00 line.long 0x00 "TLBIALLHIS,TLBIALLHIS" wgroup.long c15:0x4478++0x00 line.long 0x00 "TLBIALLNSNH,TLBIALLNSNH" wgroup.long c15:0x4438++0x00 line.long 0x00 "TLBIALLNSNHIS,TLBIALLNSNHIS" ; wgroup.long c15:0x6078++0x00 ; line.long 0x00 "TLBIALLE3,TLBIALLE3" ; wgroup.long c15:0x6038++0x00 ; line.long 0x00 "TLBIALLE3IS,TLBIALLE3IS" tree.end tree.end tree "Memory Management Unit" group.long c15:0x0001++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x00 30. "TE,T32 exception enable" "A32,T32" bitfld.long 0x00 29. "AFE,Access Flag Enable" "Disabled,Enabled" newline bitfld.long 0x00 28. "TRE,TEX remap enable" "Disabled,Enabled" bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x00 23. "SPAN,Set Privileged Access Never" "Disabled,Enabled" bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.long 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" bitfld.long 0x00 18. "NTWE,Not trap WFE" "No,Yes" newline bitfld.long 0x00 16. "NTWI,Not trap WFI" "No,Yes" bitfld.long 0x00 13. "V,Base Location of Exception Registers" "VBAR value,0xFFFF0000" newline bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes" newline bitfld.long 0x00 5. "CP15BEN,C15 Barrier Enable" "Disabled,Enabled" rbitfld.long 0x00 4. "LSMAOE,Load/Store Multiple Atomicity and Ordering Enable" "Reserved,Enabled" newline rbitfld.long 0x00 3. "NTLSMD,No Trap Load/Store Multiple to Device-nGRE/Device-nGnRE/Device-nGnRnE memory" "Reserved,No Trap" bitfld.long 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x00 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.long c15:0x4001++0x0 line.long 0x00 "HSCTLR,Hypervisor System Control Register" bitfld.long 0x00 30. "TE,Thumb exception enable" "A32,T32" bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x00 19. "WXN,Write permission implies XN" "Not forced,Forced" bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes" bitfld.long 0x00 7. "ITD,IT instruction functionality Disabled" "No,?..." newline bitfld.long 0x00 5. "CP15BEN,C15 Barrier Enable" "Disabled,Enabled" rbitfld.long 0x00 4. "LSMAOE,Load/Store Multiple Atomicity and Ordering Enable" "Reserved,Enabled" newline rbitfld.long 0x00 3. "NTLSMD,No Trap Load/Store Multiple to Device-nGRE/Device-nGnRE/Device-nGnRnE memory" "Trapped,No Trapped" bitfld.long 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x00 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x00 0. "M,Enable address translation" "Disabled,Enabled" if (((per.l(c15:0x0202))&0x80000000)==0x00000000) group.long c15:0x0002++0x00 line.long 0x00 "TTBR0,Translation Table Base Registers" hexmask.long 0x00 7.--31. 0x80 "TTB0,Translation table base address" bitfld.long 0x00 6. 0. "IRGN,Inner region bits" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 5. "NOS,Not Outer Shareable bit" "Outer,Inner" bitfld.long 0x00 3.--4. "RGN,RGN" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 1. "S,Shareable bit" "Non-shareable,Shareable" group.long c15:0x0102++0x00 line.long 0x00 "TTBR1,Translation Table Base Registers" hexmask.long 0x00 7.--31. 0x80 "TTB1,Translation table base address" bitfld.long 0x00 6. 0. "IRGN,Inner region bits" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 5. "NOS,Not Outer Shareable bit" "Outer,Inner" bitfld.long 0x00 3.--4. "RGN,RGN" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable" group.long c15:0x0202++0x00 line.long 0x00 "TTBCR,Translation Table Base Control Register" bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit" bitfld.long 0x00 5. "PD1,Translation table walk disable for translations using TTBR1" "No,Yes" newline bitfld.long 0x00 4. "PD0,Translation table walk disable for translations using TTBR0" "No,Yes" bitfld.long 0x00 0.--2. "N,Width of the base address held in TTBR0" "0,1,2,3,4,5,6,7" else group.quad c15:0x10020++0x01 line.quad 0x00 "TTBR0,Translation Table Base Registers" hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 1. "BADDR,Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.quad c15:0x11020++0x01 line.quad 0x00 "TTBR1,Translation Table Base Registers" hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 1.--47. 1. "BADDR,Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.long c15:0x0202++0x00 line.long 0x00 "TTBCR,Translation Table Base Control Register" bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit" bitfld.long 0x00 28.--29. "SH1,Shareability attributes for the memory associated with the translation table walks using TTBR1" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.long 0x00 26.--27. "ORGN1,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 24.--25. "IRGN1,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 23. "EPD1,Translation Walk Disable for TTBR1" "No,Yes" bitfld.long 0x00 22. "A1,Selects whether TTBR0 or TTBR1 defines the ASID" "TTBR0,TTBR1" newline bitfld.long 0x00 16.--18. "T1SZ,The Size offset of the TTBR1 addressed region" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 7. "EPD0,Translation Walk Disable for TTBR0 region" "No,Yes" bitfld.long 0x00 6. "T2E,TTBCR2 Enable" "Disabled,Enabled" newline bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7" endif if corename()=="CORTEXA55" group.long c15:0x0302++0x00 line.long 0x00 "TTBCR2,Translation Table Base Control Register 2" bitfld.long 0x00 18. "HWU162,Hardware usage of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1" "Not possible,Possible" bitfld.long 0x00 17. "HWU161,Hardware usage of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1" "Not possible,Possible" newline bitfld.long 0x00 16. "HWU160,Hardware usage of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1" "Not possible,Possible" bitfld.long 0x00 15. "HWU159,Hardware usage of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR1" "Not possible,Possible" newline bitfld.long 0x00 14. "HWU062,Hardware usage of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" bitfld.long 0x00 13. "HWU061,Hardware usage of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" newline bitfld.long 0x00 12. "HWU060,Hardware usage of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" bitfld.long 0x00 11. "HWU059,Hardware usage of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" newline bitfld.long 0x00 10. "HPD1,Hierarchical Permission Disable for the TTBR1 region" "No,Yes" bitfld.long 0x00 9. "HPD0,Hierarchical Permission Disable for the TTBR0 region" "No,Yes" group.long c15:0x007F++0x00 line.long 0x00 "ATTBCR,Auxiliary Translation Table Base Control Register" bitfld.long 0x00 13. "HWVAL160,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB1 if HWEN160 is set" "0,1" bitfld.long 0x00 12. "HWVAL159,Indicates the value of PBHA[0] on page table walks memory access targeting the base address defined by TTB1 if HWEN159 is set" "0,1" newline bitfld.long 0x00 9. "HWVAL060,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN060 is set" "0,1" bitfld.long 0x00 8. "HWVAL059,Indicates the value of PBHA[1] on page table walks memory access targeting the base address defined by TTB0 if HWEN059 is set" "0,1" newline bitfld.long 0x00 5. "HWEN160,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" bitfld.long 0x00 4. "HWEN159,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB1" "Disabled,Enabled" newline bitfld.long 0x00 1. "HWEN060,Enables PBHA[1] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" bitfld.long 0x00 0. "HWEN059,Enables PBHA[0] page table walks memory access targeting the base address defined by TTB0" "Disabled,Enabled" endif group.quad c15:0x14020++0x01 line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register" hexmask.quad 0x00 1.--47. 0x02 "BADDR,Translation table base address" bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.long c15:0x4202++0x00 line.long 0x00 "HTCR,Hypervisor Translation Control Register" bitfld.long 0x00 28. "HWU062,Hardware usage of bit[62] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" bitfld.long 0x00 27. "HWU061,Hardware usage of bit[61] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" newline bitfld.long 0x00 26. "HWU060,Hardware usage of bit[60] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" bitfld.long 0x00 25. "HWU059,Hardware usage of bit[59] of the stage1 translation table block or level 3 entry for pages pointed to by TTBR0" "Not possible,Possible" newline bitfld.long 0x00 24. "HPD,Hierarchical Permission Disables" "No,Yes" bitfld.long 0x00 12.--13. "SH0,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.long 0x00 10.--11. "ORGN0,Outer cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 8.--9. "IRGN0,Inner cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 0.--2. "T0SZ,The size offset of the memory region addressed by HTTBR" "0,1,2,3,4,5,6,7" group.long c15:0x0003++0x00 line.long 0x00 "DACR,Domain Access Control Register" bitfld.long 0x0 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager" bitfld.long 0x0 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager" bitfld.long 0x0 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager" bitfld.long 0x0 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager" bitfld.long 0x0 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager" bitfld.long 0x0 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager" bitfld.long 0x0 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager" bitfld.long 0x0 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager" bitfld.long 0x0 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager" if corename()=="CORTEXA75" if ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x1)==0x0)) group.long c15:0x0047++0x00 line.long 0x00 "PAR,Physical Address Register" hexmask.long.tbyte 0x00 12.--31. 0x10 "PA,Physical Address" bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,Long" newline bitfld.long 0x00 10. "NOS,Not Outer Shareable attribute for the region" "Outer,?..." bitfld.long 0x00 9. "NS,Non-secure" "No,Yes" newline bitfld.long 0x00 7. "SH,Shareability attribute for the region" "No,Yes" newline bitfld.long 0x00 4.--6. "INNER,Inner memory attributes for the region" "Non-cacheable,Device-nGnRnE,Reserved,Device-nGnRE,Reserved,Write-Back/Write-Allocate,Write-Through,Write-Back/No Write-Allocate" newline bitfld.long 0x00 2.--3. "OUTER,Outer memory attributes for the region" "Non-cacheable,Write-Back/Write-Allocate,Write-Through/No Write-Allocate,Write-Back/No Write-Allocate" newline bitfld.long 0x00 1. "SS,Used to indicate if the result is a Supersection" "No,Yes" newline bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x1)==0x1)) group.long c15:0x0047++0x00 line.long 0x00 "PAR,Physical Address Register" bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,?..." newline newline newline bitfld.long 0x00 6. "FS[5],Fault status bit [5] - External abort type" "Internal,External" newline newline bitfld.long 0x00 1.--5. "FS[4:0],Fault status bit [4:0] - Abort source" "Reserved,Alignment,Debug,Access flag/L1,Instruction,Translation/L1,Access flag/L2,Translation/L2,Sync. external,Domain/L1,Reserved,Domain/L2,Sync. external/on TTW/L1,Permission/L1,Sync. external/on TTW/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp. exclusive access,SError,Reserved,Reserved,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." newline bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif ((((per.l(c15:0x0202))&0x80000000)==0x80000000)&&(((per.l(c15:0x10070))&0x1)==0x0)) group.quad c15:0x10070++0x01 line.quad 0x00 "PAR,Physical Address Register" hexmask.quad.byte 0x00 56.--63. 1. "ATTR,Memory attributes for the returned PA" hexmask.quad.long 0x00 12.--39. 0x10 "PA,Physical Address" newline bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" ",Long" newline bitfld.quad 0x00 9. "NS,Non-secure" "No,Yes" bitfld.quad 0x00 7.--8. "SH,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline newline newline newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" else group.quad c15:0x10070++0x01 line.quad 0x00 "PAR,Physical Address Register" newline bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" ",Long" newline bitfld.quad 0x00 9. "FSTAGE,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2" bitfld.quad 0x00 8. "S2WLK,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes" newline newline newline bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Address size/TTBR,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity/ECC on TTW/L2,Sync. parity/ECC/on TTW/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" endif elif corename()=="CORTEXA55" if ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x1)==0x0)) group.long c15:0x0047++0x00 line.long 0x00 "PAR,Physical Address Register" hexmask.long.tbyte 0x00 12.--31. 0x10 "PA,Physical Address" newline bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,?..." bitfld.long 0x00 10. "NOS,Not Outer Shareable attribute for the region" "Outer,Inner" newline bitfld.long 0x00 9. "NS,Non-secure" "No,Yes" bitfld.long 0x00 7. "SH,Shareability attribute for the region" "No,Yes" newline bitfld.long 0x00 4.--6. "INNER,Inner memory attributes for the region" "Non-cacheable,Device-nGnRnE,Reserved,Device-nGnRE,Reserved,Write-Back/Write-Allocate,Write-Through,Write-Back/No Write-Allocate" newline bitfld.long 0x00 2.--3. "OUTER,Outer memory attributes for the region" "Non-cacheable,Write-Back/Write-Allocate,Write-Through/No Write-Allocate,Write-Back/No Write-Allocate" newline bitfld.long 0x00 1. "SS,Used to indicate if the result is a Supersection" "No,Yes" newline bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,?..." elif ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x1)==0x1)) group.long c15:0x0047++0x00 line.long 0x00 "PAR,Physical Address Register" newline bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,?..." newline bitfld.long 0x00 6. "FS[5],Fault status bit [5] - External abort type" "Internal,External" newline newline newline bitfld.long 0x00 1.--5. "FS[4:0],Fault status bit [4:0] - Abort source" "Reserved,Alignment,Debug,Access flag/L1,Instruction,Translation/L1,Access flag/L2,Translation/L2,Sync. external,Domain/L1,Reserved,Domain/L2,Sync. external/on TTW/L1,Permission/L1,Sync. external/on TTW/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp. exclusive access,SError,Reserved,Reserved,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." newline bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" ",Aborted" elif ((((per.l(c15:0x0202))&0x80000000)==0x80000000)&&(((per.l(c15:0x10070))&0x1)==0x0)) group.quad c15:0x10070++0x01 line.quad 0x00 "PAR,Physical Address Register" hexmask.quad.byte 0x00 56.--63. 1. "ATTR,Memory attributes for the returned PA" hexmask.quad.long 0x00 12.--39. 0x10 "PA,Physical Address" newline bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" ",Long" newline bitfld.quad 0x00 9. "NS,Non-secure" "No,Yes" bitfld.quad 0x00 7.--8. "SH,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline newline newline newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,?..." else group.quad c15:0x10070++0x01 line.quad 0x00 "PAR,Physical Address Register" newline bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" ",Long" newline bitfld.quad 0x00 9. "FSTAGE,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2" bitfld.quad 0x00 8. "S2WLK,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes" newline newline newline bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Address size/TTBR,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity/ECC on TTW/L2,Sync. parity/ECC/on TTW/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" ",Aborted" endif endif tree.open "Memory Attribute Indirection Registers" rgroup.long c15:0x003A++0x00 line.long 0x00 "AMAIR0,Auxiliary Memory Attribute Indirection Register 0" rgroup.long c15:0x013A++0x00 line.long 0x00 "AMAIR1,Auxiliary Memory Attribute Indirection Register 1" if corename()=="CORTEXA75" if (((per.l(c15:0x0202))&0x80000000)==0x80000000) group.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" else rgroup.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" rgroup.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" endif elif corename()=="CORTEXA55" if (((per.l(c15:0x0202))&0x80000000)==0x80000000) group.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" else rgroup.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" rgroup.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" endif endif rgroup.long c15:0x403A++0x00 line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0" rgroup.long c15:0x413A++0x00 line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1" if corename()=="CORTEXA75" if (((per.l(c15:0x0202))&0x80000000)==0x80000000) group.long c15:0x002A++0x00 line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x012A++0x00 line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x010D++0x00 line.long 0x00 "CONTEXTIDR,Context ID Register" else group.long c15:0x002A++0x0 line.long 0x00 "PRRR,Primary Region Remap Register" bitfld.long 0x00 31. "NOS7,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 30. "NOS6,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 29. "NOS5,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 28. "NOS4,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 27. "NOS3,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 26. "NOS2,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 25. "NOS1,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 24. "NOS0,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 19. "NS1,Mapping of S = 1 attribute for Normal memory" "Not shareable,Shareable" bitfld.long 0x00 18. "NS0,Mapping of S = 0 attribute for Normal memory" "Not shareable,Shareable" newline bitfld.long 0x00 17. "DS1,Mapping of S = 1 attribute for Device memory" "Not shareable,Shareable" bitfld.long 0x00 16. "DS0,Mapping of S = 0 attribute for Device memory" "Not shareable,Shareable" newline bitfld.long 0x00 14.--15. "TR7,{TEX[0] C B} = b111 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 12.--13. "TR6,{TEX[0] C B} = b110 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." newline bitfld.long 0x00 10.--11. "TR5,{TEX[0] C B} = b101 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 8.--9. "TR4,{TEX[0] C B} = b100 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." newline bitfld.long 0x00 6.--7. "TR3,{TEX[0] C B} = b011 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 4.--5. "TR2,{TEX[0] C B} = b010 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." newline bitfld.long 0x00 2.--3. "TR1,{TEX[0] C B} = b001 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 0.--1. "TR0,{TEX[0] C B} = b000 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." group.long c15:0x012A++0x0 line.long 0x00 "NMRR,Normal Memory Remap Register" bitfld.long 0x00 30.--31. "OR7,Outer Attribute for {TEX[0] C B} = b111 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 28.--29. "OR6,Outer Attribute for {TEX[0] C B} = b110 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 26.--27. "OR5,Outer Attribute for {TEX[0] C B} = b101 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 24.--25. "OR4,Outer Attribute for {TEX[0] C B} = b100 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 22.--23. "OR3,Outer Attribute for {TEX[0] C B} = b011 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 20.--21. "OR2,Outer Attribute for {TEX[0] C B} = b010 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 18.--19. "OR1,Outer Attribute for {TEX[0] C B} = b001 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 16.--17. "OR0,Outer Attribute for {TEX[0] C B} = b000 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 14.--15. "IR7,Inner attribute for {TEX[0] C B} = b111 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 12.--13. "IR6,Inner attribute for {TEX[0] C B} = b110 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 10.--11. "IR5,Inner attribute for {TEX[0] C B} = b101 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 8.--9. "IR4,Inner attribute for {TEX[0] C B} = b100 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 6.--7. "IR3,Inner attribute for {TEX[0] C B} = b011 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 4.--5. "IR2,Inner attribute for {TEX[0] C B} = b010 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 2.--3. "IR1,Inner attribute for {TEX[0] C B} = b001 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 0.--1. "IR0,Inner attribute for {TEX[0] C B} = b000 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" group.long c15:0x010D++0x00 line.long 0x00 "CONTEXTIDR,Context ID Register" hexmask.long.tbyte 0x00 8.--31. 1. "PROCID,Process Identifier" hexmask.long.byte 0x00 0.--7. 1. "ASID,Address Space Identifier" endif elif corename()=="CORTEXA55" if (((per.l(c15:0x0202))&0x80000000)==0x80000000) group.long c15:0x002A++0x00 line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x012A++0x00 line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x010D++0x00 line.long 0x00 "CONTEXTIDR,Context ID Register" else group.long c15:0x002A++0x0 line.long 0x00 "PRRR,Primary Region Remap Register" bitfld.long 0x00 31. "NOS7,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 30. "NOS6,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 29. "NOS5,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 28. "NOS4,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 27. "NOS3,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 26. "NOS2,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 25. "NOS1,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 24. "NOS0,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 19. "NS1,Mapping of S = 1 attribute for Normal memory" "Not shareable,Shareable" bitfld.long 0x00 18. "NS0,Mapping of S = 0 attribute for Normal memory" "Not shareable,Shareable" newline bitfld.long 0x00 17. "DS1,Mapping of S = 1 attribute for Device memory" "Not shareable,Shareable" bitfld.long 0x00 16. "DS0,Mapping of S = 0 attribute for Device memory" "Not shareable,Shareable" newline bitfld.long 0x00 14.--15. "TR7,{TEX[0] C B} = b111 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 12.--13. "TR6,{TEX[0] C B} = b110 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." newline bitfld.long 0x00 10.--11. "TR5,{TEX[0] C B} = b101 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 8.--9. "TR4,{TEX[0] C B} = b100 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." newline bitfld.long 0x00 6.--7. "TR3,{TEX[0] C B} = b011 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 4.--5. "TR2,{TEX[0] C B} = b010 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." newline bitfld.long 0x00 2.--3. "TR1,{TEX[0] C B} = b001 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." bitfld.long 0x00 0.--1. "TR0,{TEX[0] C B} = b000 Remap" "Device (nGnRnE),Device (not nGnRnE),Normal,?..." group.long c15:0x012A++0x0 line.long 0x00 "NMRR,Normal Memory Remap Register" bitfld.long 0x00 30.--31. "OR7,Outer Attribute for {TEX[0] C B} = b111 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 28.--29. "OR6,Outer Attribute for {TEX[0] C B} = b110 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 26.--27. "OR5,Outer Attribute for {TEX[0] C B} = b101 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 24.--25. "OR4,Outer Attribute for {TEX[0] C B} = b100 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 22.--23. "OR3,Outer Attribute for {TEX[0] C B} = b011 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 20.--21. "OR2,Outer Attribute for {TEX[0] C B} = b010 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 18.--19. "OR1,Outer Attribute for {TEX[0] C B} = b001 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 16.--17. "OR0,Outer Attribute for {TEX[0] C B} = b000 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 14.--15. "IR7,Inner attribute for {TEX[0] C B} = b111 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 12.--13. "IR6,Inner attribute for {TEX[0] C B} = b110 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 10.--11. "IR5,Inner attribute for {TEX[0] C B} = b101 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 8.--9. "IR4,Inner attribute for {TEX[0] C B} = b100 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 6.--7. "IR3,Inner attribute for {TEX[0] C B} = b011 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 4.--5. "IR2,Inner attribute for {TEX[0] C B} = b010 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" newline bitfld.long 0x00 2.--3. "IR1,Inner attribute for {TEX[0] C B} = b001 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" bitfld.long 0x00 0.--1. "IR0,Inner attribute for {TEX[0] C B} = b000 Remap" "Non-cacheable,Write-Back Allocate,Write-Through,Write-Back no Allocate" group.long c15:0x010D++0x00 line.long 0x00 "CONTEXTIDR,Context ID Register" hexmask.long.tbyte 0x00 8.--31. 1. "PROCID,Process Identifier" hexmask.long.byte 0x00 0.--7. 1. "ASID,Address Space Identifier" endif endif tree.end tree.end tree "Virtualization Extensions" group.long c15:0x4000++0x00 line.long 0x00 "VPIDR,Virtualization Processor ID Register" hexmask.long.byte 0x0 24.--31. 0x1 "IMPL,Implementer code" bitfld.long 0x00 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "ARCH, Architecture" "0,ARMv4,ARMv4T,ARMv5,ARMv5T,ARMv5TE,ARMv5TEJ,ARMv6,8,9,10,11,12,13,14,CPUID scheme" hexmask.long.word 0x00 4.--15. 1. "PART,Primary Part Number" newline bitfld.long 0x00 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long c15:0x4500++0x00 line.long 0x00 "VMPIDR,Virtualization Multiprocessor ID Registers" bitfld.long 0x00 31. "M,Multiprocessing Extensions Register format" "Reserved,Supported" bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" newline bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Not implemented,Implemented" hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Identifies different clusters within the system" newline bitfld.long 0x00 8.--15. "AFF1,Affinity level 1. Identifies individual cores within the local FCM cluster" "CORE0,CORE1,CORE2,CORE3,CORE4,CORE5,CORE6,CORE7,?..." hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Identifies individual threads within a multi-threaded core" group.long c15:0x420D++0x00 line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register" group.long c15:0x4001++0x0 line.long 0x00 "HSCTLR,Hypervisor System Control Register" bitfld.long 0x00 30. "TE,Thumb exception enable" "A32,T32" bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x00 19. "WXN,Write permission implies XN" "Not forced,Forced" bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes" bitfld.long 0x00 7. "ITD,IT instruction functionality Disabled" "No,?..." newline bitfld.long 0x00 5. "CP15BEN,C15 Barrier Enable" "Disabled,Enabled" bitfld.long 0x00 4. "LSMAOE,Load/Store Multiple Atomicity and Ordering Enable" "Reserved,Enabled" newline bitfld.long 0x00 3. "NTLSMD,No Trap Load/Store Multiple to Device-nGRE/Device-nGnRE/Device-nGnRnE memory" "Reserved,No Trap" bitfld.long 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x00 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x00 0. "M,Enable address translation" "Disabled,Enabled" group.long c15:0x4101++0x00 line.long 0x00 "HACTLR,Hypervisor Auxiliary Control Register" bitfld.long 0x00 12. "CLUSTERPMUEN,Performance Management Registers write access control" "Not accessible,Accessible" bitfld.long 0x00 11. "SMEN,Scheme Management Registers write access control" "Not accessible,Accessible" newline bitfld.long 0x00 10. "TSIDEN,Thread Scheme ID Register enable" "Not accessible,Accessible" bitfld.long 0x00 7. "PWREN,Power Control Registers access control" "Not accessible,Accessible" newline bitfld.long 0x00 5. "ERXPFGEN,Error Record Registers write access control" "Not accessible,Accessible" bitfld.long 0x00 1. "ECTLREN,Extended Control Registers write access control" "Not accessible,Accessible" newline bitfld.long 0x00 0. "ACTLREN,Auxiliary Control Registers write access control" "Not accessible,Accessible" rgroup.long c15:0x4301++0x00 line.long 0x00 "HACTLR2,Hypervisor Auxiliary Control Register 2" rgroup.long c15:0x4711++0x00 line.long 0x00 "HACR,Hypervisor Auxiliary Configuration Register" group.long c15:0x4011++0x00 line.long 0x00 "HCR,Hypervisor Configuration Register" bitfld.long 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "No trap,Trap" bitfld.long 0x00 27. "TGE,Trap General Exceptions from Non-secure EL0" "No trap,Trap" newline bitfld.long 0x00 26. "TVM,Trap Virtual Memory controls" "No trap,Trap" bitfld.long 0x00 25. "TTLB,Trap TLB maintenance instructions" "No trap,Trap" newline bitfld.long 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unification" "No trap,Trap" bitfld.long 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency" "No trap,Trap" newline bitfld.long 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way" "No trap,Trap" bitfld.long 0x00 21. "TAC,Trap Auxiliary Control Register" "No trap,Trap" newline bitfld.long 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "No trap,Trap" bitfld.long 0x00 19. "TSC,Trap SMC" "No trap,Trap" newline bitfld.long 0x00 18. "TID3,Trap ID Group 3" "No trap,Trap" bitfld.long 0x00 17. "TID2,Trap ID Group 2" "No trap,Trap" newline bitfld.long 0x00 16. "TID1,Trap ID Group 1" "No trap,Trap" bitfld.long 0x00 15. "TID0,Trap ID Group 0" "No trap,Trap" newline bitfld.long 0x00 14. "TWE,Trap WFE" "No trap,Trap" bitfld.long 0x00 13. "TWI,Trap WFI" "No trap,Trap" newline bitfld.long 0x00 12. "DC,Default Cacheable" "Disabled,Enabled" bitfld.long 0x00 10.--11. "BSU,Barrier Shareability upgrade" "No effect,Inner Shareable,Outer Shareable,Full System" newline bitfld.long 0x00 9. "FB,Force broadcast" "Not forced,Forced" bitfld.long 0x00 8. "VA,Virtual Asynchronous Abort exception" "Not pending,Pending" newline bitfld.long 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending" bitfld.long 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending" newline bitfld.long 0x00 5. "AMO,Asynchronous Abort Mask Override" "Disabled,Enabled" bitfld.long 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled" newline bitfld.long 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled" bitfld.long 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled" newline bitfld.long 0x00 1. "SWIO,Set/Way Invalidation Override" "Disabled,Enabled" bitfld.long 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled" group.long c15:0x4411++0x00 line.long 0x00 "HCR2,Hypervisor Configuration Register" bitfld.long 0x00 5. "TEA, Route synchronous external aborts to EL2" "Not routed,Routed" bitfld.long 0x00 4. "TERR, Trap Error record accesses" "No trap,Trap" newline bitfld.long 0x00 1. "ID,Stage 2 Instruction cache disable" "No,Yes" bitfld.long 0x00 0. "CD,Stage 2 Data cache disable" "No,Yes" group.long c15:0x3054++0x00 line.long 0x00 "DSPSR,Debug Saved Program Status Register" bitfld.long 0x00 31. "N,Negative condition flag" "Not negative,Negative" bitfld.long 0x00 30. "Z,Zero condition flag" "Not zero,Zero" newline bitfld.long 0x00 29. "C,Carry condition flag" "Not carry,Carry" bitfld.long 0x00 28. "V,Overflow condition flag" "No overflow,Overflow" newline bitfld.long 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred" bitfld.long 0x00 22. "PAN,Privileged Access Never" "No,Yes" newline bitfld.long 0x00 21. "SS,Software step" "0,1" bitfld.long 0x00 20. "IL,Illegal Execution state" "0,1" newline bitfld.long 0x00 16.--19. "GE,Greater than or Equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 13.--15. "IT[5:7],IT block state bits for the T32 IT (If-Then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 25.--26. 10.--12. "IT[0:4],IT block state bits for the T32 IT (If-Then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 9. "E,Endianness state bit" "Little,Big" newline bitfld.long 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked" bitfld.long 0x00 7. "I,IRQ mask bit" "Not masked,Masked" newline bitfld.long 0x00 6. "F,FIQ mask bit" "Not masked,Masked" bitfld.long 0x00 5. "T,T32 Instruction set state" "A32,T32" newline bitfld.long 0x00 4. "M[4],Execution state that the exception was taken from" ",AArch32" bitfld.long 0x00 0.--3. "M[3:0],Current PE mode" "User,FIQ,IRQ,Supervisor,,,Monitor,Abort,,,Hyp,Undefined,,,,System" group.long c15:0x4111++0x00 line.long 0x00 "HDCR,Hypervisor Debug Control Register" bitfld.long 0x00 17. "HPMD,Guest Performance Monitors Disable" "Allowed,Prohibited" bitfld.long 0x00 11. "TDRA,Trap Debug ROM Access" "No trap,Trap" newline bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related Register Access" "No trap,Trap" bitfld.long 0x00 9. "TDA,Trap Debug Access" "No trap,Trap" newline bitfld.long 0x00 8. "TDE,Trap Debug Exceptions" "No trap,Trap" bitfld.long 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled" newline bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No trap,Trap" bitfld.long 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No trap,Trap" newline bitfld.long 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long c15:0x4211++0x00 line.long 0x00 "HCPTR,Hypervisor Coprocessor Trap Register" bitfld.long 0x0 31. "TCPAC,Trap Coprocessor Access Control" "No trap,Trap" bitfld.long 0x0 20. "TTA,Traps Non-secure System Register accesses to all implemented trace Registers to Hypervisor mode" "No trap,Trap" newline bitfld.long 0x0 15. "TASE,Trap Advanced SIMD extensions" "No trap,Trap" bitfld.long 0x0 11. "TCP11,Trap coprocessor 11" "No trap,Trap" newline bitfld.long 0x0 10. "TCP10,Trap coprocessor 10" "No trap,Trap" group.long c15:0x4311++0x00 line.long 0x00 "HSTR,Hypervisor System Trap Register" bitfld.long 0x00 15. "T15,Trap to Hypervisor mode Non-secure priv 15" "No trap,Trap" bitfld.long 0x00 13. "T13,Trap to Hypervisor mode Non-secure priv 13" "No trap,Trap" newline bitfld.long 0x00 12. "T12,Trap to Hypervisor mode Non-secure priv 12" "No trap,Trap" bitfld.long 0x00 11. "T11,Trap to Hypervisor mode Non-secure priv 11" "No trap,Trap" newline bitfld.long 0x00 10. "T10,Trap to Hypervisor mode Non-secure priv 10" "No trap,Trap" bitfld.long 0x00 9. "T9,Trap to Hypervisor mode Non-secure priv 9" "No trap,Trap" newline bitfld.long 0x00 8. "T8,Trap to Hypervisor mode Non-secure priv 8" "No trap,Trap" bitfld.long 0x00 7. "T7,Trap to Hypervisor mode Non-secure priv 7" "No trap,Trap" newline bitfld.long 0x00 6. "T6,Trap to Hypervisor mode Non-secure priv 6" "No trap,Trap" bitfld.long 0x00 5. "T5,Trap to Hypervisor mode Non-secure priv 5" "No trap,Trap" newline bitfld.long 0x00 3. "T3,Trap to Hypervisor mode Non-secure priv 3" "No trap,Trap" bitfld.long 0x00 2. "T2,Trap to Hypervisor mode Non-secure priv 2" "No trap,Trap" newline bitfld.long 0x00 1. "T1,Trap to Hypervisor mode Non-secure priv 1" "No trap,Trap" bitfld.long 0x00 0. "T0,Trap to Hypervisor mode Non-secure priv 0" "No trap,Trap" group.quad c15:0x14020++0x01 line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register" hexmask.quad 0x00 1.--47. 0x02 "BADDR,Translation table base address" bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" group.long c15:0x4202++0x00 line.long 0x00 "HTCR,Hypervisor Translation Control Register" bitfld.long 0x00 28. "HWU62,Hardware usage of bit[62] of the stage2 translation table block or level 3 entry" "Not possible,Possible" bitfld.long 0x00 27. "HWU61,Hardware usage of bit[61] of the stage2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.long 0x00 26. "HWU60,Hardware usage of bit[60] of the stage2 translation table block or level 3 entry" "Not possible,Possible" bitfld.long 0x00 25. "HWU59,Hardware usage of bit[59] of the stage2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.long 0x00 24. "HPD,Hierarchical Permission Disables" "No,Yes" bitfld.long 0x00 12.--13. "SH0,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.long 0x00 10.--11. "ORGN0,Outer cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 8.--9. "IRGN0, ,Inner cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 0.--2. "T0SZ,The size offset of the memory region addressed by HTTBR" "0,1,2,3,4,5,6,7" if corename()=="CORTEXA75" group.quad c15:0x16020++0x01 line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register" hexmask.quad.word 0x00 48.--63. 1. "VMID,VMID for the translation table" hexmask.quad 0x00 4.--47. 0x10 "BADDR,Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,Supported" elif corename()=="CORTEXA55" group.long c15:0x407F++0x00 line.long 0x00 "AHTCR,Auxiliary Hypervisor Translation Control Register" bitfld.long 0x00 9. "HWVAL60,Indicates the value of PBHA[1] page table walks memory access if HWEN60 is set" "0,1" bitfld.long 0x00 8. "HWVAL59,Indicates the value of PBHA[1] page table walks memory access if HWEN59 is set" "0,1" newline bitfld.long 0x00 1. "HWEN60,Enables PBHA[1] page table walks memory access" "Disabled,Enabled" bitfld.long 0x00 0. "HWEN59,Enables PBHA[0] page table walks memory access" "Disabled,Enabled" group.quad c15:0x16020++0x01 line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 2.--47. 0x04 "BADDR,Translation table base address" newline bitfld.quad 0x00 0. "CNP,Common not Private" "Not supported,?..." endif if corename()=="CORTEXA75" group.long c15:0x4212++0x00 line.long 0x00 "VTCR,Virtualization Translation Control Register" bitfld.long 0x00 28. "HWU62,Hardware usage of bit[62] of the stage2 translation table block or level 3 entry" "Not possible,Possible" bitfld.long 0x00 27. "HWU61,Hardware usage of bit[61] of the stage2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.long 0x00 26. "HWU60,Hardware usage of bit[60] of the stage2 translation table block or level 3 entry" "Not possible,Possible" bitfld.long 0x00 25. "HWU59,Hardware usage of bit[59] of the stage2 translation table block or level 3 entry" "Not possible,Possible" newline bitfld.long 0x00 12.--13. "SH0,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.long 0x00 10.--11. "ORGN0,Outer cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 8.--9. "IRGN0,Inner cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 6.--7. "SL0,Starting level for translation table walks using VTTBR" "L2,L1,?..." newline bitfld.long 0x00 4. "S,Sign extension bit" "0,1" bitfld.long 0x00 0.--3. "T0SZ,Size offset of the memory region addressed by TTBR0" "0,1,2,3,4,5,6,7,-8,-7,-6,-5,-4,-3,-2,-1" elif corename()=="CORTEXA55" group.long c15:0x4212++0x00 line.long 0x00 "VTCR,Virtualization Translation Control Register" bitfld.long 0x00 12.--13. "SH0,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.long 0x00 10.--11. "ORGN0,Outer cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 8.--9. "IRGN0,Inner cacheability attribute, Normal memory" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 6.--7. "SL0,Starting level for translation table walks using VTTBR" "L2,L1,?..." newline bitfld.long 0x00 4. "S,Sign extension bit" "0,1" bitfld.long 0x00 0.--3. "T0SZ,Size offset of the memory region addressed by TTBR0" "0,1,2,3,4,5,6,7,-8,-7,-6,-5,-4,-3,-2,-1" group.long c15:0x417F++0x00 line.long 0x00 "AVTCR,Auxiliary Virtualized Translation Control Register" bitfld.long 0x00 9. "HWVAL60,Indicates the value of PBHA[1] page table walks memory access if HWEN60 is set" "0,1" bitfld.long 0x00 8. "HWVAL59,Indicates the value of PBHA[1] page table walks memory access if HWEN59 is set" "0,1" newline bitfld.long 0x00 1. "HWEN60,Enables PBHA[1] page table walks memory access" "Disabled,Enabled" bitfld.long 0x00 0. "HWEN59,Enables PBHA[0] page table walks memory access" "Disabled,Enabled" endif rgroup.long c15:0x4015++0x00 line.long 0x00 "HADFSR,Hypervisor Auxiliary Data Fault Status Syndrome Register" rgroup.long c15:0x4115++0x00 line.long 0x00 "HAIFSR,Hypervisor Auxiliary Instruction Fault Status Register" group.long c15:0x4006++0x00 line.long 0x00 "HDFAR,Hypervisor Data Fault Address Register" group.long c15:0x3154++0x00 line.long 0x00 "DLR,Debug Link Register" if (((per.l(c15:0x4025))&0xFC000000)==0x0) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." elif (((per.l(c15:0x4025))&0xFC000000)==0x4000000) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.l(c15:0x4025))&0xFC000000)==(0xC000000||0x20000000||0x14000000)) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 17.--19. "OPC2,The Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--16. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--13. "CRN,The CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCR,MRC/VMRS" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 17.--19. "OPC2,The Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 14.--16. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.long 0x00 10.--13. "CRN,The CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCR,MRC/VMRS" endif elif (((per.l(c15:0x4025))&0xFC000000)==(0x10000000||0x30000000)) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10.--13. "RT2,The Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCRR,MRRC" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 16.--19. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--13. "RT2,The Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCRR,MRRC" endif elif (((per.l(c15:0x4025))&0xFC000000)==0x18000000) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.long 0x00 5.--8. "RN,The Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.long 0x00 1.--3. "AM,Addressing mode" "Imm unindexed,Imm post-indexed,Imm offset,Imm pre-indexed,Literal unindexed (A32),Reserved,Literal offset (A32),?..." newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "STC,LDC" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.long 0x00 5.--8. "RN,The Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" newline bitfld.long 0x00 1.--3. "AM,Addressing mode" "Imm unindexed,Imm post-indexed,Imm offset,Imm pre-indexed,Literal unindexed (A32),Reserved,Literal offset (A32),?..." bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "STC,LDC" endif elif (((per.l(c15:0x4025))&0xFC000000)==0x1C000000) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5. "TA,Indicates trapped use of Advanced SIMD functionality" "Not occurred,Occurred" bitfld.long 0x00 0.--3. "COPROC,The number of the coprocessor accessed by the trapped operation" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CP10,?..." else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 5. "TA,Indicates trapped use of Advanced SIMD functionality" "Not occurred,Occurred" newline bitfld.long 0x00 0.--3. "COPROC,The number of the coprocessor accessed by the trapped operation" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CP10,?..." endif elif (((per.l(c15:0x4025))&0xFC000000)==(0x44000000||0x48000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline hexmask.long.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif ((((per.l(c15:0x4025))&0xFC000000)==(0x80000000||0x84000000))&&(((per.l(c15:0x4025))&0x3F)==0x10)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 10. "FNV,FAR not Valid" "HIFAR valid,HIFAR invalid" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" newline bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code. SEA - Synchronous External Abort / SPE - Synchronous parity or ECC" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Reserved,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,?..." elif ((((per.l(c15:0x4025))&0xFC000000)==(0x80000000||0x84000000))&&(((per.l(c15:0x4025))&0x3F)!=0x10)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 9. "EA,External abort type" "Internal,External" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code. SEA - Synchronous External Abort / SPE - Synchronous parity or ECC" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Reserved,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,?..." elif (((per.l(c15:0x4025))&0xFC000000)==(0x88000000||0x38000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." elif (((per.l(c15:0x4025))&0xFD000000)==(0x91000000||0x95000000)) if (((per.l(c15:0x4025))&0x3F)==(0x11)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.long 0x00 16.--19. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14. "AR,Acquire/Release semantics present" "Absent,Present" bitfld.long 0x00 10.--11. "AET,Asynchronous Error Type" "UC,UEU,UEO/CE,UER" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code. SEA - Synchronous External Abort / SPE - Synchronous parity or ECC" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.long 0x00 16.--19. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14. "AR,Acquire/Release semantics present" "Absent,Present" bitfld.long 0x00 10. "FNV,FAR not Valid" "Valid,Invalid" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code. SEA - Synchronous External Abort / SPE - Synchronous parity or ECC" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." endif elif (((per.l(c15:0x4025))&0xFD000000)==(0x90000000||0x94000000)) if (((per.l(c15:0x4025))&0x3F)==(0x11)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 10.--11. "AET,Asynchronous Error Type" "UC,UEU,UEO/CE,UER" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code. SEA - Synchronous External Abort / SPE - Synchronous parity or ECC" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 10. "FNV,FAR not Valid" "Valid,Invalid" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code. SEA - Synchronous External Abort / SPE - Synchronous parity or ECC" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." endif elif (((per.l(c15:0x4025))&0xFC080000)==(0x4C080000)) if (((per.l(c15:0x4025))&0x1000000)==(0x1000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 19. "CCKNOWNPASS,Trapped instruction" "Unconditional,Conditional" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 19. "CCKNOWNPASS,Trapped instruction" "Unconditional,Conditional" endif elif (((per.l(c15:0x4025))&0xFC080000)==(0x4C000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 19. "CCKNOWNPASS,Trapped instruction" "Unconditional,Conditional" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped Coprocessor Usage,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline hexmask.long 0x00 0.--24. 1. "ISS,Instruction specific syndrome" endif rgroup.long c15:0x4115++0x00 line.long 0x00 "HAIFSR,Hypervisor Auxiliary Instruction Fault Status Register" group.long c15:0x4206++0x00 line.long 0x00 "HIFAR,Hypervisor Instruction Fault Address Register" group.long c15:0x4406++0x00 line.long 0x00 "HPFAR,Hypervisor IPA Fault Address Register" hexmask.long 0x00 4.--31. 0x10 "FIPA[39:12],Bits [39:12] of the faulting intermediate physical address" tree.open "Hypervisor Memory Attribute Indirection Registers" if corename()=="CORTEXA75" if (((per.l(c15:0x0202))&0x80000000)==0x80000000) group.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Reserved,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" else rgroup.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" rgroup.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" endif elif corename()=="CORTEXA55" if (((per.l(c15:0x0202))&0x80000000)==0x80000000) group.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" else rgroup.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" rgroup.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" endif endif rgroup.long c15:0x403A++0x00 line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0" rgroup.long c15:0x413A++0x00 line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1" tree.end newline group.long c15:0x400C++0x00 line.long 0x00 "HVBAR,Hypervisor Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address" tree.end tree "Cache Control and Configuration" rgroup.long c15:0x000F++0x00 line.long 0x00 "CPUCFR,CPU Configuration Register" bitfld.long 0x00 2. "SCU,Indicates whether the SCU is present or not" "Present,?..." bitfld.long 0x00 0.--1. "ECC,Indicates whether ECC is present or not" "Not present,Present,?..." group.long c15:0x072F++0x00 line.long 0x00 "CPUPWRCTLR,Power Control Register" bitfld.long 0x00 10.--12. "SIMD_RET_CTRL,Advanced SIMD and floating-point retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" bitfld.long 0x00 7.--9. "WFE_RET_CTRL,CPU WFE retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" bitfld.long 0x00 4.--6. "WFI_RET_CTRL,CPU WFI retention control. Specifies the number of Architectural Timer ticks required before retention entry" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" newline bitfld.long 0x00 0. "CORE_PWRDN_EN,Indicates to the power controller if the CPU wants to power down when it enters WFI state" "Not requested,Requested" rgroup.long c15:0x0100++0x00 line.long 0x00 "CTR,Cache Type Register" bitfld.long 0x00 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.long 0x00 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.long 0x00 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.long 0x00 14.--15. "L1IP,Instruction cache policy" "Reserved,Reserved,VIPT,?..." bitfld.long 0x00 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." if (((per.l(c15:0x2000))&0x0E)==0x00) group.long c15:0x2000++0x00 line.long 0x00 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,Level 3,?..." bitfld.long 0x00 0. "IND,Instruction/Not Data" "Data,Instruction" else group.long c15:0x2000++0x00 line.long 0x00 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,Level 3,?..." bitfld.long 0x00 0. "IND,Instruction/Not Data" "Unified,?..." endif rgroup.long c15:0x1000++0x00 line.long 0x00 "CCSIDR,Cache size ID Register" bitfld.long 0x00 31. "WT,Indicates whether the selected cache level supports Write-Through" "Not Supported,?..." bitfld.long 0x00 30. "WB,Indicates whether the selected cache level supports Write-Back" "Not Supported,Supported" bitfld.long 0x00 29. "RA,Indicates whether the selected cache level supports read-allocation" "Not Supported,Supported" newline bitfld.long 0x00 28. "WA,Indicates whether the selected cache level supports write-allocation" "Not Supported,Supported" hexmask.long.word 0x00 13.--27. 1. 1. "SETS,Number of Sets" hexmask.long.word 0x00 3.--12. 1. 1. "ASSOC,Associativity" newline bitfld.long 0x00 0.--2. "LSIZE,Line Size" "Reserved,Reserved,64 bytes,?..." if corename()=="CORTEXA75" rgroup.long c15:0x1100++0x00 line.long 0x00 "CLIDR,Cache Level ID Register" bitfld.long 0x00 30.--31. "ICB,Inner cache boundary" "Reserved,Reserved,L2 highest,L3 highest" bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Not required,?..." bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,Reserved,No L3 cache,L3 cache,?..." newline bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Not required,?..." bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,Reserved,Reserved,Reserved,L3 cache,?..." bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "Reserved,Reserved,Reserved,Reserved,Unified,?..." newline bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate I/D,?..." elif corename()=="CORTEXA55" rgroup.long c15:0x1100++0x00 line.long 0x00 "CLIDR,Cache Level ID Register" bitfld.long 0x00 30.--31. "ICB,Inner cache boundary" "Reserved,Reserved,L2 highest,L3 highest" bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Not required,?..." bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,No cache,L2 or L3 cache,L2 and L3 cache,?..." newline bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Not required,?..." bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "L2 or L3 cache,Reserved,Reserved,Reserved,L2 and L3 cache,?..." bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,Reserved,Reserved,Reserved,Unified,?..." newline bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate I/D,?..." endif tree "Level 1 memory system" rgroup.long c15:0x600F++0x00 line.long 0x00 "CDBGDR0,Data Register 0" rgroup.long c15:0x610F++0x00 line.long 0x00 "CDBGDR1,Data Register 1" rgroup.long c15:0x620F++0x00 line.long 0x00 "CDBGDR2,Data Register 2" wgroup.long c15:0x602F++0x00 line.long 0x00 "CDBGDCT,Data Cache Tag Read Operation Register" wgroup.long c15:0x612F++0x00 line.long 0x00 "CDBGICT,Instruction Cache Tag Read Operation Register" wgroup.long c15:0x622F++0x00 line.long 0x00 "CDBGTT,TLB Tag Read Operation Register" wgroup.long c15:0x604F++0x00 line.long 0x00 "CDBGDCD,Data Cache Data Read Operation Register" wgroup.long c15:0x614F++0x00 line.long 0x00 "CDBGICD,Instruction Cache Data Read Operation Register" wgroup.long c15:0x624F++0x00 line.long 0x00 "CDBGTD,TLB Data Read Operation Register" tree.end tree.end tree "System Performance Monitor" group.long c15:0x00C9++0x00 line.long 0x00 "PMCR,Performance Monitors Control Register" hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code" hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code" bitfld.long 0x00 11.--15. "N,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6. "LC,Long cycle counter enable" "Disabled,Enabled" newline bitfld.long 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes" bitfld.long 0x00 4. "X,Export Enable" "Disabled,Enabled" bitfld.long 0x00 3. "D,Clock Divider" "Every cycle,64th cycle" bitfld.long 0x00 2. "C,Clock Counter Reset" "No reset,Reset" newline bitfld.long 0x00 1. "P,Performance Counter Reset" "No reset,Reset" bitfld.long 0x00 0. "E,All Counters Enable" "Disabled,Enabled" group.long c15:0x01C9++0x00 line.long 0x00 "PMCNTENSET,Performance Monitors Count Enable Set Register" bitfld.long 0x00 31. "C,PMCCNTR Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,Event counter PMN 5 enable bit" "Disabled,Enabled" bitfld.long 0x00 4. "P4,Event counter PMN 4 enable bit" "Disabled,Enabled" newline bitfld.long 0x00 3. "P3,Event counter PMN 3 enable bit" "Disabled,Enabled" bitfld.long 0x00 2. "P2,Event counter PMN 2 enable bit" "Disabled,Enabled" bitfld.long 0x00 1. "P1,Event counter PMN 1 enable bit" "Disabled,Enabled" newline bitfld.long 0x00 0. "P0,Event counter PMN 0 enable bit" "Disabled,Enabled" group.long c15:0x02C9++0x00 line.long 0x00 "PMCNTENCLR,Performance Monitors Count Enable Clear Register" bitfld.long 0x00 31. "C,PMCCNTR Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,Event counter PMN 5 enable bit" "Disabled,Enabled" bitfld.long 0x00 4. "P4,Event counter PMN 4 enable bit" "Disabled,Enabled" newline bitfld.long 0x00 3. "P3,Event counter PMN 3 enable bit" "Disabled,Enabled" bitfld.long 0x00 2. "P2,Event counter PMN 2 enable bit" "Disabled,Enabled" bitfld.long 0x00 1. "P1,Event counter PMN 1 enable bit" "Disabled,Enabled" newline bitfld.long 0x00 0. "P0,Event counter PMN 0 enable bit" "Disabled,Enabled" group.long c15:0x03C9++0x00 line.long 0x00 "PMOVSR,Performance Monitors Overflow Status Flags Register" eventfld.long 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow" eventfld.long 0x00 5. "P5,PMN5 overflow" "No overflow,Overflow" eventfld.long 0x00 4. "P4,PMN4 overflow" "No overflow,Overflow" newline eventfld.long 0x00 3. "P3,PMN3 overflow" "No overflow,Overflow" eventfld.long 0x00 2. "P2,PMN2 overflow" "No overflow,Overflow" eventfld.long 0x00 1. "P1,PMN1 overflow" "No overflow,Overflow" newline eventfld.long 0x00 0. "P0,PMN0 overflow" "No overflow,Overflow" wgroup.long c15:0x04C9++0x00 line.long 0x00 "PMSWINC,Performance Monitors Software Increment Register" bitfld.long 0x00 5. "P5,PMN5 software increment" "Disabled,Enabled" bitfld.long 0x00 4. "P4,PMN4 software increment" "Disabled,Enabled" bitfld.long 0x00 3. "P3,PMN3 software increment" "Disabled,Enabled" newline bitfld.long 0x00 2. "P2,PMN2 software increment" "Disabled,Enabled" bitfld.long 0x00 1. "P1,PMN1 software increment" "Disabled,Enabled" bitfld.long 0x00 0. "P0,PMN0 software increment" "Disabled,Enabled" group.long c15:0x05C9++0x00 line.long 0x00 "PMSELR,Performance Monitors Event Counter Selection Register" bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.open "Common Event Identification Registers" rgroup.long c15:0x06C9++0x00 line.long 0x00 "PMCEID0,Performance Monitors Common Event Identification Register 0" bitfld.long 0x00 31. "L1D_CACHE_ALLOCATE,Level 1 data cache allocate" "Not implemented,Implemented" bitfld.long 0x00 30. "CHAIN,Chain" "Not implemented,Implemented" bitfld.long 0x00 29. "BUS_CYCLES,Bus cycle" "Not implemented,Implemented" newline bitfld.long 0x00 28. "TTBR_WRITE_RETIRED,TTBR write retired" "Not implemented,Implemented" bitfld.long 0x00 27. "INST_SPEC,Instruction speculatively executed" "Not implemented,Implemented" bitfld.long 0x00 26. "MEMORY_ERROR,Local memory error" "Not implemented,Implemented" newline bitfld.long 0x00 25. "BUS_ACCESS,Bus access" "Not implemented,Implemented" bitfld.long 0x00 24. "L2D_CACHE_WB,Level 2 data cache write-back" "Not implemented,Implemented" bitfld.long 0x00 23. "L2D_CACHE_REFILL,Level 2 data cache refill" "Not implemented,Implemented" newline bitfld.long 0x00 22. "L2D_CACHE,Level 2 data cache access" "Not implemented,Implemented" bitfld.long 0x00 21. "L1D_CACHE_WB,Level 1 data cache write-back" "Not implemented,Implemented" bitfld.long 0x00 20. "L1I_CACHE,Level 1 instruction cache access" "Not implemented,Implemented" newline bitfld.long 0x00 19. "MEM_ACCESS,Data memory access" "Not implemented,Implemented" bitfld.long 0x00 18. "BR_PRED,Predictable branch speculatively executed" "Not implemented,Implemented" bitfld.long 0x00 17. "CPU_CYCLES,CPU Cycle" "Not implemented,Implemented" newline bitfld.long 0x00 16. "BR_MIS_PRED,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented" bitfld.long 0x00 15. "UNALIGNED_LDST_RETIRED,UNALIGNED_LDST_RETIRED" "Not implemented,Implemented" bitfld.long 0x00 14. "BR_RETURN_RETIRED,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented" newline bitfld.long 0x00 13. "BR_IMMED_RETIRED,Instruction architecturally executed immediate branch" "Not implemented,Implemented" bitfld.long 0x00 12. "PC_WRITE_RETIRED,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented" bitfld.long 0x00 11. "CID_WRITE_RETIRED,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented" newline bitfld.long 0x00 10. "EXC_RETURN,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented" bitfld.long 0x00 9. "EXC_TAKEN,Exception taken" "Not implemented,Implemented" bitfld.long 0x00 8. "INST_RETIRED,Instruction architecturally executed" "Not implemented,Implemented" newline bitfld.long 0x00 7. "ST_RETIRED,Instruction architecturally executed condition check pass store" "Not implemented,Implemented" bitfld.long 0x00 6. "LD_RETIRED,Instruction architecturally executed condition check pass load" "Not implemented,Implemented" bitfld.long 0x00 5. "L1D_TLB_REFILL,Level 1 data TLB refill" "Not implemented,Implemented" newline bitfld.long 0x00 4. "L1D_CACHE,Level 1 data cache access" "Not implemented,Implemented" bitfld.long 0x00 3. "L1D_CACHE_REFILL,Level 1 data cache refill" "Not implemented,Implemented" bitfld.long 0x00 2. "L1I_TLB_REFILL,Level 1 instruction TLB refill" "Not implemented,Implemented" newline bitfld.long 0x00 1. "L1I_CACHE_REFILL,Level 1 instruction cache refill" "Not implemented,Implemented" bitfld.long 0x00 0. "SW_INCR,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented" if corename()=="CORTEXA75" rgroup.long c15:0x07C9++0x00 line.long 0x00 "PMCEID1,Performance Monitors Common Event Identification Register 1" bitfld.long 0x00 24. "REMOTE_ACCESS,Access to another socket in a multi-socket system" "Not implemented,Implemented" bitfld.long 0x00 23. "LL_CACHE_MISS_RD,Last Level cache miss read" "Not implemented,Implemented" bitfld.long 0x00 22. "LL_CACHE_RD,Last Level cache access read" "Not implemented,Implemented" newline bitfld.long 0x00 21. "ITLB_WALK,Access to instruction TLB that caused a page table walk" "Not implemented,Implemented" bitfld.long 0x00 20. "DTLB_WALK,Access to data TLB that caused a page table walk" "Not implemented,Implemented" bitfld.long 0x00 16. "L2I_TLB,Attributable Level 2 instruction TLB access" "Not implemented,Implemented" newline bitfld.long 0x00 15. "L2D_TLB,Attributable Level 2 data or unified TLB access" "Not implemented,Implemented" bitfld.long 0x00 13. "L2D_TLB_REFILL,Attributable Level 2 data or unified TLB refill" "Not implemented,Implemented" bitfld.long 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Not implemented,Implemented" newline bitfld.long 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Not implemented,Implemented" bitfld.long 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Not implemented,Implemented" bitfld.long 0x00 6. "L1I_TLB,Level 1 instruction TLB access" "Not implemented,Implemented" newline bitfld.long 0x00 5. "L1D_TLB,Level 1 data or unified TLB access" "Not implemented,Implemented" bitfld.long 0x00 4. "STALL_BACKEND,No operation issued due to backend" "Not implemented,Implemented" bitfld.long 0x00 3. "STALL_FRONTEND,No operation issued due to the frontend" "Not implemented,Implemented" newline bitfld.long 0x00 1. "BR_RETIRED,Instruction architecturally executed branch" "Not implemented,Implemented" bitfld.long 0x00 0. "L2D_CACHE_ALLOCATE,Level 2 data cache allocate" "Not implemented,Implemented" elif corename()=="CORTEXA55" rgroup.long c15:0x07C9++0x00 line.long 0x00 "PMCEID1,Performance Monitors Common Event Identification Register 1" bitfld.long 0x00 24. "REMOTE_ACCESS,Access to another socket in a multi-socket system" "Not implemented,Implemented" bitfld.long 0x00 23. "LL_CACHE_MISS_RD,Last Level cache miss read" "Not implemented,Implemented" bitfld.long 0x00 22. "LL_CACHE_RD,Last Level cache access read" "Not implemented,Implemented" newline bitfld.long 0x00 21. "ITLB_WALK,Access to instruction TLB that caused a page table walk" "Not implemented,Implemented" bitfld.long 0x00 20. "DTLB_WALK,Access to data TLB that caused a page table walk" "Not implemented,Implemented" bitfld.long 0x00 16. "L2I_TLB,Attributable Level 2 instruction TLB access" "Not implemented,Implemented" newline bitfld.long 0x00 15. "L2D_TLB,Attributable Level 2 data or unified TLB access" "Not implemented,Implemented" bitfld.long 0x00 14. "L2I_TLB_REFILL,Attributable Level 2 instruction TLB refill" "Not implemented,Implemented" bitfld.long 0x00 13. "L2D_TLB_REFILL,Attributable Level 2 data or unified TLB refill" "Not implemented,Implemented" newline bitfld.long 0x00 12. "L3D_CACHE_WB,Attributable Level 3 data or unified cache write-back" "Not implemented,Implemented" bitfld.long 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Not implemented,Implemented" bitfld.long 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Not implemented,Implemented" newline bitfld.long 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Not implemented,Implemented" bitfld.long 0x00 8. "L2I_CACHE_REFILL,Attributable Level 2 instruction cache refill" "Not implemented,Implemented" bitfld.long 0x00 7. "L2I_CACHE,Attributable Level 2 instruction cache access" "Not implemented,Implemented" newline bitfld.long 0x00 6. "L1I_TLB,Level 1 instruction TLB access" "Not implemented,Implemented" bitfld.long 0x00 5. "L1D_TLB,Level 1 data or unified TLB access" "Not implemented,Implemented" bitfld.long 0x00 4. "STALL_BACKEND,No operation issued due to backend" "Not implemented,Implemented" newline bitfld.long 0x00 3. "STALL_FRONTEND,No operation issued due to the frontend" "Not implemented,Implemented" bitfld.long 0x00 2. "BR_MIS_PRED_RETIRED,Instruction architecturally executed mispredicted branch" "Not implemented,Implemented" bitfld.long 0x00 1. "BR_RETIRED,Instruction architecturally executed branch" "Not implemented,Implemented" newline bitfld.long 0x00 0. "L2D_CACHE_ALLOCATE,Level 2 data cache allocate" "Not implemented,Implemented" endif rgroup.long c15:0x04E9++0x00 line.long 0x00 "PMCEID2,Performance Monitors Common Event Identification Register 2" rgroup.long c15:0x05E9++0x00 line.long 0x00 "PMCEID3,Performance Monitors Common Event Identification Register 3" tree.end newline group.long c15:0x00D9++0x00 line.long 0x00 "PMCCNTR[31:0],Performance Monitors Cycle Counter (32bit access)" group.quad c15:0x13090++0x01 line.quad 0x00 "PMCCNTR[63:0],Performance Monitors Cycle Counter (64bit access)" if (((per.l(c15:0X05C9))&0x1F)==0x1F) group.long c15:0x01D9++0x00 line.long 0x00 "PMXEVTYPER,Performance Monitors Selected Event Type and Filter Register - PMCCFILTR" bitfld.long 0x00 31. "P,Privileged modes filtering" "Disabled,Enabled" bitfld.long 0x00 30. "U,User modes filtering" "Disabled,Enabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering" "Disabled,Enabled" newline bitfld.long 0x00 28. "NSU,Non-secure user modes filtering" "Disabled,Enabled" bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering" "Disabled,Enabled" elif (((per.l(c15:0X00E9))&0x1)==0x1) group.long c15:0x01D9++0x00 line.long 0x00 "PMXEVTYPER,Performance Monitors Selected Event Type and Filter Register - PMEVTYPER" bitfld.long 0x00 31. "P,Privileged modes filtering" "Disabled,Enabled" bitfld.long 0x00 30. "U,User modes filtering" "Disabled,Enabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering" "Disabled,Enabled" newline bitfld.long 0x00 28. "NSU,Non-secure user modes filtering" "Disabled,Enabled" bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering" "Disabled,Enabled" bitfld.long 0x00 26. "M,Secure EL3 filtering" "Disabled,Enabled" newline hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event number" else rgroup.long c15:0x01D9++0x00 line.long 0x00 "PMXEVTYPER,Performance Monitors Selected Event Type and Filter Register" endif group.long c15:0x02D9++0x00 line.long 0x00 "PMXEVCNTR,Performance Monitors Selected Event Counter Register" group.long c15:0x00E9++0x00 line.long 0x00 "PMUSERENR,Performance Monitors User Enable Register" bitfld.long 0x00 3. "ER,Event counter read enable" "Disabled,Enabled" bitfld.long 0x00 2. "CR,Cycle counter read enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,User enable" "Disabled,Enabled" group.long c15:0x01E9++0x00 line.long 0x00 "PMINTENSET,Performance Monitors Interrupt Enable Set Register" bitfld.long 0x00 31. "C,PMCCNTR Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x02E9++0x00 line.long 0x00 "PMINTENCLR,Performance Monitors Interrupt Enable Clear Register" bitfld.long 0x00 31. "C,PMCCNTR Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x03E9++0x00 line.long 0x00 "PMOVSSET,Performance Monitors Overflow Flag Status Set Register" bitfld.long 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow" bitfld.long 0x00 5. "P5,PMEVCNTR5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. "P4,PMEVCNTR4 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 3. "P3,PMEVCNTR3 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "P2,PMEVCNTR2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. "P1,PMEVCNTR1 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 0. "P0,PMEVCNTR0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x8E++0x00 line.long 0x00 "PMEVCNTR0,Performance Monitors Event Count Register 0" group.long c15:(0x8E+0x0040)++0x00 line.long 0x00 "PMEVTYPER0,Performance Monitors Event Type Register 0" group.long c15:0x18E++0x00 line.long 0x00 "PMEVCNTR1,Performance Monitors Event Count Register 1" group.long c15:(0x18E+0x0040)++0x00 line.long 0x00 "PMEVTYPER1,Performance Monitors Event Type Register 1" group.long c15:0x28E++0x00 line.long 0x00 "PMEVCNTR2,Performance Monitors Event Count Register 2" group.long c15:(0x28E+0x0040)++0x00 line.long 0x00 "PMEVTYPER2,Performance Monitors Event Type Register 2" group.long c15:0x38E++0x00 line.long 0x00 "PMEVCNTR3,Performance Monitors Event Count Register 3" group.long c15:(0x38E+0x0040)++0x00 line.long 0x00 "PMEVTYPER3,Performance Monitors Event Type Register 3" group.long c15:0x48E++0x00 line.long 0x00 "PMEVCNTR4,Performance Monitors Event Count Register 4" group.long c15:(0x48E+0x0040)++0x00 line.long 0x00 "PMEVTYPER4,Performance Monitors Event Type Register 4" group.long c15:0x58E++0x00 line.long 0x00 "PMEVCNTR5,Performance Monitors Event Count Register 5" group.long c15:(0x58E+0x0040)++0x00 line.long 0x00 "PMEVTYPER5,Performance Monitors Event Type Register 5" group.long c15:0x07FE++0x00 line.long 0x00 "PMCCFILTR,Performance Monitors Cycle Count Filter Register" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Disabled,Enabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Disabled,Enabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Disabled,Enabled" newline bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" tree.end tree "System Timer Registers" group.long c15:0x000E++0x00 line.long 0x00 "CNTFRQ,Counter Frequency Register" group.quad c15:0x100E0++0x01 line.quad 0x00 "CNTPCT,Counter Physical Count Register" rgroup.quad c15:0x110E0++0x01 line.quad 0x00 "CNTVCT,Counter Virtual Count Register" group.quad c15:0x140E0++0x01 line.quad 0x00 "CNTVOFF,Counter Virtual Offset Register" group.long c15:0x001E++0x00 line.long 0x00 "CNTKCTL,Timer PL1 Control Register" bitfld.long 0x00 9. "EL0PTEN,Controls whether the physical timer Registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.long 0x00 8. "EL0VTEN,Controls whether the virtual timer Registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter, when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0" newline bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled" bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency Register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled" bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency Register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled" group.long c15:0x401E++0x00 line.long 0x00 "CNTHCTL,Counter Non-secure PL2 Control Register" bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTPCT is the trigger for the event stream generated from the physical counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTPCT trigger bit, defined by EVNTI" "0 to 1,1 to 0" bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the physical counter" "Disabled,Enabled" bitfld.long 0x00 1. "EL1PCEN,Controls whether the Non-secure copies of the physical timer Registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" newline bitfld.long 0x00 0. "EL1PCTEN,Controls whether the physical counter, CNTPCT, is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" group.long c15:0x002E++0x00 line.long 0x00 "CNTP_TVAL,Counter EL1 Physical Compare Value Register" group.long c15:0x012E++0x00 line.long 0x00 "CNTP_CTL,Counter EL1 Physical Timer Control Register" rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.long 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad c15:0x120E0++0x01 line.quad 0x00 "CNTP_CVAL,Counter EL1 Physical Compare Value Register" group.long c15:0x003E++0x00 line.long 0x00 "CNTV_TVAL,Counter EL1 Virtual Timer Value Register" group.long c15:0x013E++0x00 line.long 0x00 "CNTV_CTL,Counter EL1 Virtual Timer Control Register" rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.long 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad c15:0x130E0++0x01 line.quad 0x00 "CNTV_CVAL,Counter EL1 Virtual Compare Value Register" group.long c15:0x402E++0x00 line.long 0x00 "CNTHP_TVAL,Counter Non-secure EL2 Physical Timer Value Register" group.long c15:0x412E++0x00 line.long 0x00 "CNTHP_CTL,Counter Non-secure EL2 Physical Timer Control Register" rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.long 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad c15:0x160E0++0x01 line.quad 0x00 "CNTHP_CVAL,Counter Non-secure EL2 Physical Compare Value Register" tree.end tree "Generic Interrupt Controller System Registers" tree "AArch32 Physical GIC CPU Interface System Registers" tree.open "Interrupt Controller Active Priorities Registers" group.long c15:0x048C++0x00 line.long 0x00 "ICC_AP0R0,Active Priorities Group 0 Register 0" bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" newline bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" newline bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" newline bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" newline bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" newline bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" newline bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" newline bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" newline bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.long c15:0x009C++0x00 line.long 0x00 "ICC_AP1R0,Active Priorities Group 1 Register 0" bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" newline bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" newline bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" newline bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" newline bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" newline bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" newline bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" newline bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" newline bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline if (((per.l(c15:0x110C0))&0x10000000000)==0x00) wgroup.quad c15:0x110C0++0x01 line.quad 0x00 "ICC_ASGI1R,Interrupt Controller Alias Software Generated Interrupt Group 1 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated" else wgroup.quad c15:0x110C0++0x01 line.quad 0x00 "ICC_ASGI1R,Interrupt Controller Alias Software Generated Interrupt Group 1 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.long c15:0x038C++0x00 line.long 0x00 "ICC_BPR0,Binary Point Register 0" bitfld.long 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.long c15:0x03CC++0x00 line.long 0x00 "ICC_BPR1,Binary Point Register 1" bitfld.long 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" group.long c15:0x04CC++0x00 line.long 0x00 "ICC_CTLR,Interrupt Control Registers for EL1" rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported" rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Supported" rbitfld.long 0x00 14. "SEIS,SEI Support" "Not supported,?..." rbitfld.long 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,?..." newline rbitfld.long 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" bitfld.long 0x00 1. "EOIMODE,Controls whether a write to an End of Interrupt Register also deactivates the interrupt" "Enabled,Disabled" newline bitfld.long 0x00 0. "CBPR,Common Binary Point Register. Controls whether the same Register is used for interrupt pre-emption of both Group 0 and Group 1 interrupt" "Separate Registers,Same Register" group.long c15:0x64CC++0x00 line.long 0x00 "ICC_MCTLR,Interrupt Control Registers for EL3" rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported" rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.long 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported" rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Supported" rbitfld.long 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,?..." newline rbitfld.long 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,?..." rbitfld.long 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt Register also deactivates the interrupt(Non-secure EL1 and EL2)" "Enabled,Disabled" bitfld.long 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt Register also deactivates the interrupt(Secure EL1)" "Enabled,Disabled" bitfld.long 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt Register also deactivates the interrupt(EL3)" "Enabled,Disabled" newline bitfld.long 0x00 1. "CBPR_EL1NS,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate Registers,Same Register" bitfld.long 0x00 0. "CBPR_EL1S,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate Registers,Same Register" wgroup.long c15:0x01BC++0x00 line.long 0x00 "ICC_DIR,Deactivate Interrupt Register" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.long c15:0x018C++0x00 line.long 0x00 "ICC_EOIR0,End Of Interrupt Register 0" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0 access" wgroup.long c15:0x01CC++0x00 line.long 0x00 "ICC_EOIR1,End Of Interrupt Register 1" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1 access." rgroup.long c15:0x028C++0x00 line.long 0x00 "ICC_HPPIR0,Highest Priority Pending Interrupt Register 0" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.long c15:0x02CC++0x00 line.long 0x00 "ICC_HPPIR1,Highest Priority Pending Interrupt Register 1" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.long c15:0x008C++0x00 line.long 0x00 "ICC_IAR0,Interrupt Acknowledge Register 0" rgroup.long c15:0x00CC++0x00 line.long 0x00 "ICC_IAR1,Interrupt Acknowledge Register 1" group.long c15:0x06CC++0x00 line.long 0x00 "ICC_IGRPEN0,Interrupt Group Enable Register 0" bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.long c15:0x07CC++0x00 line.long 0x00 "ICC_IGRPEN1,Interrupt Group Enable Register 1" bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.long c15:0x0064++0x00 line.long 0x00 "ICC_PMR,Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface" rgroup.long c15:0x03BC++0x00 line.long 0x00 "ICC_RPR,Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface" if (((per.q(c15:0x120C0))&0x10000000000)==0x00) group.quad c15:0x120C0++0x01 line.quad 0x00 "ICC_SGI0R,Interrupt Controller Software Generated Interrupt Group 0 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated." else group.quad c15:0x120C0++0x01 line.quad 0x00 "ICC_SGI0R,Interrupt Controller Software Generated Interrupt Group 0 Register" bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif group.long c15:0x05CC++0x00 line.long 0x00 "ICC_SRE,System Register Enable Register for EL1" bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" rbitfld.long 0x00 0. "SRE,System Register Enable" "Reserved,Enabled" group.long c15:0x459C++0x00 line.long 0x00 "ICC_HSRE,System Register Enable Register for EL2" rbitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1" "Reserved,Enabled" bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline rbitfld.long 0x00 0. "SRE,System Register Enable" "Reserved,Enabled" group.long c15:0x65CC++0x00 line.long 0x00 "ICC_MSRE,System Register Enable Register for EL3" rbitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1 and ICC_SRE_EL2" "Reserved,Enabled" bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline rbitfld.long 0x00 0. "SRE,System Register Enable" "Reserved,Enabled" group.long c15:0x67CC++0x00 line.long 0x00 "ICC_MGRPEN1,Monitor Group1 Interrupt Group Enable" bitfld.long 0x00 1. "ENABLEGRP1S,Enables Group 1 interrupts for the Secure state" "Disabled,Enabled" bitfld.long 0x00 0. "ENABLEGRP1NS,Enables Group 1 interrupts for the Non-secure state" "Disabled,Enabled" tree.end tree "AArch32 Virtual GIC CPU Interface System Registers" tree.open "Interrupt Controller Active Priorities Registers" group.long c15:0x048C++0x00 line.long 0x00 "ICV_AP0R0,Active Priorities Group 0 Register 0" bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" newline bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" newline bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" newline bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" newline bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" newline bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" newline bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" newline bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" newline bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.long c15:0x009C++0x00 line.long 0x00 "ICV_AP1R0,Active Priorities Group 1 Register 0" bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" newline bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" newline bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" newline bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" newline bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" newline bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" newline bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" newline bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" newline bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline group.long c15:0x038C++0x00 line.long 0x00 "ICV_BPR0,Binary Point Register 0" bitfld.long 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.long c15:0x03CC++0x00 line.long 0x00 "ICV_BPR1,Binary Point Register 1" bitfld.long 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control And Interrupt Preemption Control" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" group.long c15:0x4CC++0x00 line.long 0x00 "ICV_CTLR,Control Register" rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported" rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline bitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Supported" bitfld.long 0x00 14. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,?..." bitfld.long 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,?..." newline bitfld.long 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1. "VEOIMODE,Controls whether a write to an End of Interrupt Register also deactivates the interrupt" "Disabled,Enabled" newline bitfld.long 0x00 0. "VCBPR,Controls whether the same Register is used for interrupt preemption of both virtual Group 0 and virtual Group 1 interrupts" "Separate Registers,Same Register" wgroup.long c15:0x01BC++0x00 line.long 0x00 "ICV_DIR,Deactivate Interrupt Register" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.long c15:0x018C++0x00 line.long 0x00 "ICV_EOIR0,End Of Interrupt Register 0" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0 access" wgroup.long c15:0x01CC++0x00 line.long 0x00 "ICV_EOIR1,End Of Interrupt Register 1" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1 access" rgroup.long c15:0x028C++0x00 line.long 0x00 "ICV_HPPIR0,Highest Priority Pending Interrupt Register 0" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.long c15:0x02CC++0x00 line.long 0x00 "ICV_HPPIR1,Highest Priority Pending Interrupt Register 1" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.long c15:0x008C++0x00 line.long 0x00 "ICV_IAR0,Interrupt Acknowledge Register 0" rgroup.long c15:0x00CC++0x00 line.long 0x00 "ICV_IAR1,Interrupt Acknowledge Register 1" group.long c15:0x06CC++0x00 line.long 0x00 "ICV_IGRPEN0,Interrupt Group 0 Enable Register" bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.long c15:0x07CC++0x00 line.long 0x00 "ICV_IGRPEN1,Interrupt Group 1 Enable Register" bitfld.long 0x00 0. "ENABLE,Enables Group 1 interrupts" "Disabled,Enabled" newline group.long c15:0x064CC++0x00 line.long 0x00 "ICV_MCTLR,Monitor Control Register" rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported" rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.long 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported" rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Reserved,Supported" rbitfld.long 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,?..." newline rbitfld.long 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,?..." rbitfld.long 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (Non-secure EL1 and EL2)" "Priority drop/Deactivation,Priority drop" bitfld.long 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (Secure EL1)" "Enabled,Disabled" bitfld.long 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (EL3)" "Enabled,Disabled" newline bitfld.long 0x00 1. "CBPR_EL1NS,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate Registers,Same Register" bitfld.long 0x00 0. "CBPR_EL1S,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate Registers,Same Register" group.long c15:0x67CC++0x00 line.long 0x00 "ICV_MGRPEN1,Monitor Interrupt Group 1 Enable Register" bitfld.long 0x00 1. "ENABLEGRP1S,Enables Group 1 interrupts for the Secure state" "Disabled,Enabled" bitfld.long 0x00 0. "ENABLEGRP1NS,Enables Group 1 interrupts for the Non-secure state" "Disabled,Enabled" group.long c15:0x0064++0x00 line.long 0x00 "ICV_PMR,Interrupt Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,The priority mask level for the CPU interface" rgroup.long c15:0x03BC++0x00 line.long 0x00 "ICV_RPR,Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,The current running priority on the CPU interface" tree.end tree "AArch32 Virtual Interface Control System Registers" tree.open "Hypervisor Active Priorities Registers" group.long c15:0x408C++0x00 line.long 0x00 "ICH_AP0R0,Hypervisor Active Priorities Group 0 Register 0" bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" newline bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" newline bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" newline bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" newline bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" newline bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" newline bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" newline bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" newline bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.long c15:0x409C++0x00 line.long 0x00 "ICH_AP1R0,Hypervisor Active Priorities Group 1 Register 0" bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" newline bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" newline bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" newline bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" newline bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" newline bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" newline bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" newline bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" newline bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline rgroup.long c15:0x438C++0x00 line.long 0x00 "ICH_EISR,End of Interrupt Status Register" bitfld.long 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List Register 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List Register 2" "No interrupt,Interrupt" bitfld.long 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List Register 1" "No interrupt,Interrupt" newline bitfld.long 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List Register 0" "No interrupt,Interrupt" rgroup.long c15:0x458C++0x00 line.long 0x00 "ICH_ELRSR,Empty List Register Status Register" bitfld.long 0x00 3. "STATUS3,Status bit for List Register 3" "Interrupt,No interrupt" bitfld.long 0x00 2. "STATUS2,Status bit for List Register 2" "Interrupt,No interrupt" bitfld.long 0x00 1. "STATUS1,Status bit for List Register 1" "Interrupt,No interrupt" newline bitfld.long 0x00 0. "STATUS0,Status bit for List Register 0" "Interrupt,No interrupt" group.long c15:0x40BC++0x00 line.long 0x00 "ICH_HCR,Hypervisor Control Register" bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR Register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR and ICV_DIR" "No trap,Trap" bitfld.long 0x00 13. "TSEI,Trap all locally generated SEIs" "No trap,Trap" newline bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* and ICV_* System Registers for Group 1 interrupts to EL2" "No trap,Trap" bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* and ICV_* System Registers for Group 0 interrupts to EL2" "No trap,Trap" bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System Registers that are common to Group 0 and Group 1 to EL2" "No trap,Trap" newline bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" group.long c15:(0x40CC+0x0)++0x00 line.long 0x00 "ICH_LR0,List Register 0" hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" group.long c15:(0x40CC+0x100)++0x00 line.long 0x00 "ICH_LR1,List Register 1" hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" group.long c15:(0x40CC+0x200)++0x00 line.long 0x00 "ICH_LR2,List Register 2" hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" group.long c15:(0x40CC+0x300)++0x00 line.long 0x00 "ICH_LR3,List Register 3" hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" group.long c15:(0x40EC+0x0)++0x00 line.long 0x00 "ICH_LRC0,List Register Extension 0" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" group.long c15:(0x40EC+0x100)++0x00 line.long 0x00 "ICH_LRC1,List Register Extension 1" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" group.long c15:(0x40EC+0x200)++0x00 line.long 0x00 "ICH_LRC2,List Register Extension 2" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" group.long c15:(0x40EC+0x300)++0x00 line.long 0x00 "ICH_LRC3,List Register Extension 3" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" rgroup.long c15:0x42BC++0x00 line.long 0x00 "ICH_MISR,Maintenance Interrupt State Register" bitfld.long 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted" bitfld.long 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted" bitfld.long 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted" newline bitfld.long 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted" bitfld.long 0x00 3. "NP,No Pending" "Not asserted,Asserted" bitfld.long 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted" newline bitfld.long 0x00 1. "U,Underflow" "Not asserted,Asserted" bitfld.long 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted" group.long c15:0x47BC++0x00 line.long 0x00 "ICH_VMCR,Virtual Machine Control Register" hexmask.long.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface" bitfld.long 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" bitfld.long 0x00 18.--20. "VBPR1,Virtual Binary Point Register, Group 1" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" newline bitfld.long 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt Register also deactivates the virtual interrupt" "Disabled,Enabled" bitfld.long 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate Registers,Same Register" bitfld.long 0x00 3. "VFIQEN,Virtual FIQ enable" "Reserved,Virtual FIQs" newline bitfld.long 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled" bitfld.long 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled" group.long c15:0x449C++0x00 line.long 0x00 "ICH_VSEIR,Virtual System Error Interrupt Register" rgroup.long c15:0x41BC++0x00 line.long 0x00 "ICH_VTR,VGIC Type Register" bitfld.long 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented, minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,?..." newline bitfld.long 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,?..." bitfld.long 0x00 21. "A3V,Affinity 3 Valid" "Reserved,Supported" bitfld.long 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,?..." newline bitfld.long 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Reserved,Supported" bitfld.long 0x00 0.--4. "LISTREGS,The number of implemented List Registers minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.end tree.end tree "Debug Registers" tree "Coresight Management Registers" if corename()=="CORTEXA75" rgroup.long c14:0x0000++0x0 line.long 0x0 "DBGDIDR,Debug ID Register" bitfld.long 0x0 28.--31. "WRP,Number of Watchpoint Register Pairs" "Reserved,Reserved,Reserved,4,?..." bitfld.long 0x0 24.--27. "BRP,Number of Breakpoint Register Pairs" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..." bitfld.long 0x0 20.--23. "CTX_CMP,Number of BRPs with Context ID Comparison Capability" "Reserved,2,?..." newline bitfld.long 0x00 16.--19. "VERSION,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,v8.2,?..." bitfld.long 0x0 14. "NSUHD,Secure User halting debug-mode" "Reserved,Not supported" bitfld.long 0x0 12. "SE,Security Extensions implemented" "Reserved,Implemented" elif corename()=="CORTEXA55" rgroup.long c14:0x0000++0x0 line.long 0x0 "DBGDIDR,Debug ID Register" bitfld.long 0x0 28.--31. "WRP,Number of Watchpoint Register Pairs" "Reserved,Reserved,Reserved,4,?..." bitfld.long 0x0 24.--27. "BRP,Number of Breakpoint Register Pairs" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..." bitfld.long 0x0 20.--23. "CTX_CMP,Number of BRPs with Context ID Comparison Capability" "Reserved,2,?..." newline bitfld.long 0x00 16.--19. "VERSION,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,v8.2,?..." bitfld.long 0x0 14. "NSUHD,Secure User halting debug-mode" "Reserved,Not supported" bitfld.long 0x0 12. "SE,Security Extensions implemented" "Reserved,Implemented" endif rgroup.long c14:0x0060++0x0 line.long 0x00 "DBGWFAR,Watchpoint Fault Address Register" group.long c14:0x0070++0x0 line.long 0x00 "DBGVCR,Debug Vector Catch register" bitfld.long 0x00 31. "FIQVCE_NS,FIQ vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 30. "IRQVCE_NS,IRG vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 28. "DAVCE_NS,Data Abort vector catch in Non-secure state" "Disabled,Enabled" newline bitfld.long 0x00 27. "PAVCE_NS,Prefetch Abort vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 26. "SVCVCE_NS,SVC vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 25. "UIVCE_NS,Undefined instruction vector catch in Non-secure state" "Disabled,Enabled" newline bitfld.long 0x00 23. "FIQ,HVBAR: FIQ" "Disabled,Enabled" bitfld.long 0x00 22. "IRQ,HVBAR: IRQ" "Disabled,Enabled" bitfld.long 0x00 21. "HEE,HVBAR: Hyp Entry Exception" "Disabled,Enabled" newline bitfld.long 0x00 20. "DA,HVBAR: Data Abort" "Disabled,Enabled" bitfld.long 0x00 19. "PA,HVBAR: Prefetch Abort" "Disabled,Enabled" bitfld.long 0x00 18. "HVC,HVBAR: HVC" "Disabled,Enabled" newline bitfld.long 0x00 17. "UI,HVBAR: Undefined Instruction" "Disabled,Enabled" bitfld.long 0x00 15. "FIQVCE_SM,FIQ vector catch enable, in Secure state on Monitor mode vector" "Disabled,Enabled" bitfld.long 0x00 14. "IRQVCE_SM,IRQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" newline bitfld.long 0x00 12. "DAVCE_SM,Data Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" bitfld.long 0x00 11. "PAVCE_SM,Prefetch Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" bitfld.long 0x00 10. "SMCVCE_S,SMC vector catch enable in Secure state" "Disabled,Enabled" newline bitfld.long 0x00 7. "FIQVCE_S,FIQ vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 6. "IRQVCE_S,IRG vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 4. "DAVCE_S,Data Abort vector catch in Secure state" "Disabled,Enabled" newline bitfld.long 0x00 3. "PAVCE_S,Prefetch Abort vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 2. "SVCVCE_S,SVC vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 1. "UIVCE_S,Undefined instruction vector catch in Secure state" "Disabled,Enabled" newline bitfld.long 0x00 0. "RVCE,Reset vector catch enable" "Disabled,Enabled" group.long c14:0x0200++0x0 line.long 0x00 "DBGDTRRXEXT,Debug Receive Register (External View)" rgroup.long c14:0x0050++0x0 line.long 0x00 "DBGDTRRXINT,Debug Receive Register (Internal View)" group.long c14:0x0020++0x00 line.long 0x00 "DBGDCCINT,Debug Comms Channel Interrupt Enable register" bitfld.long 0x00 30. "RX,DCC interrupt enable controls" "Disabled,Enabled" bitfld.long 0x00 29. "TX,DCC interrupt enable controls" "Disabled,Enabled" ; For DBGDSCRint, bits 28 - 19, 14 - 13, 11 - 6, 1 - 0 are RES0. ; DBGDSCRint is read only. rgroup.long c14:0x0010++0x0 line.long 0x00 "DBGDSCRINT,Debug Status and Control Register (Internal View)" bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure" newline bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes" bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes" bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled" newline bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes" bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,Software Breakpoint (BKPT),Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Watchpoint,?..." ; For DBGDSCRext, bits 25 - 24, 20, 13, 11 - 7, 1 - 0 are RES0. ; DBGDSCRext is read/write only. group.long c14:0x0220++0x0 line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)" bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" bitfld.long 0x00 27. "RXO,DBGDTRRX overflow" "No overflow,Overflow" newline bitfld.long 0x00 26. "TXU,DBGDTRTX underflow" "No underflow,Underflow" bitfld.long 0x00 22.--23. "INTDIS,Interrupt disable" "Don't disable interrupts,Disable interrupts targeting non-sec EL1,Disable interrupts targeting EL1 & EL2,Disable all interrupts" bitfld.long 0x00 21. "TDA,Trap debug register access" "No trap,Trap" newline bitfld.long 0x00 19. "SC2,Sample CONTEXTIDR_EL2" "VTTBR_EL2.VMID,CONTEXTIDR_EL2" bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure" bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes" newline bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes" bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled" bitfld.long 0x00 14. "HDE,Halting debug-mode" "Disabled,Enabled" newline bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes" bitfld.long 0x00 7. "ADABORT,Asynchronous data abort" "Not aborted,Aborted" bitfld.long 0x00 6. "ERR,Cumulative error flag" "Not error,Error" newline bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,Software Breakpoint (BKPT),Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Watchpoint,?..." group.long c14:0x0230++0x0 line.long 0x00 "DBGDTRTXEXT,Debug Transmit Register (External View)" wgroup.long c14:0x0050++0x0 line.long 0x00 "DBGDTRTXINT,Debug Transmit Register (Internal View)" if (((per.l(c14:0x0411))&0x2)==0x2) group.long c14:0x0260++0x0 line.long 0x0 "DBGOSECCR,Debug OS Lock Exception Catch Control Register" else rgroup.long c14:0x0260++0x0 line.long 0x0 "DBGOSECCR,Debug OS Lock Exception Catch Control Register" endif rgroup.long c14:0x0707++0x0 line.long 0x0 "DBGDEVID2,Debug Device ID Register 2" rgroup.long c14:0x0717++0x0 line.long 0x0 "DBGDEVID1,Debug Device ID Register 1" rgroup.long c14:0x0727++0x0 line.long 0x0 "DBGDEVID,Debug Device ID Register 0" bitfld.long 0x0 28.--31. "CIDMASK,Level of support for the Context ID matching breakpoint masking capability" "Not implemented,?..." bitfld.long 0x0 24.--27. "AR,Debug External Auxiliary Control Register support status" "Not supported,?..." bitfld.long 0x0 20.--23. "DL,Support for Debug OS Double Lock Register" "Reserved,Supported,?..." newline bitfld.long 0x0 16.--19. "VE,Specifies implementation of Virtualization Extension" "Reserved,Implemented,?..." bitfld.long 0x0 12.--15. "VC,Form of the vector catch event implemented" "Implemented,?..." bitfld.long 0x0 8.--11. "BPAM,Level of support for Immediate Virtual Address matching breakpoint masking capability" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented" newline bitfld.long 0x0 4.--7. "WPAM,Level of support for the DVA matching watchpoint masking capability" "Reserved,Implemented,?..." tree.end newline rgroup.quad c14:0x10010++0x1 line.quad 0x0 "DBGDRAR,Debug ROM Address Register" rgroup.quad c14:0x10020++0x1 line.quad 0x0 "DBGDSAR,Debug Self Address Offset Register" wgroup.long c14:0x0401++0x00 line.long 0x00 "DBGOSLAR,Operating System Lock Access Register" rgroup.long c14:0x0411++0x00 line.long 0x00 "DBGOSLSR,Operating System Lock Status Register" bitfld.long 0x00 2. "NTT,32-Bit Access" "Not required,Required" bitfld.long 0x00 1. "OSLK,Status of the OS Lock" "Not locked,Locked" bitfld.long 0x00 0. 3. "OSLM,OS Lock Model implemented Bit" "Reserved,Reserved,Implemented,?..." group.long c14:0x0431++0x00 line.long 0x00 "DBGOSDLR,OS Double-lock Register" bitfld.long 0x00 0. "DLK,OS double-lock control" "Not locked,Locked" group.long c14:0x0441++0x00 line.long 0x00 "DBGPRCR,Device Power-Down and Reset Control Register" bitfld.long 0x00 0. "CORENPDRQ,Core No Power down Request" "Powered down,Emulated" group.long c14:0x0687++0x00 line.long 0x00 "DBGCLAIMSET,Claim Tag register Set" bitfld.long 0x0 7. "CT7,Claim Tag 7 Set" "Not set,Set" bitfld.long 0x0 6. "CT6,Claim Tag 6 Set" "Not set,Set" bitfld.long 0x0 5. "CT5,Claim Tag 5 Set" "Not set,Set" newline bitfld.long 0x0 4. "CT4,Claim Tag 4 Set" "Not set,Set" bitfld.long 0x0 3. "CT3,Claim Tag 3 Set" "Not set,Set" bitfld.long 0x0 2. "CT2,Claim Tag 2 Set" "Not set,Set" newline bitfld.long 0x0 1. "CT1,Claim Tag 1 Set" "Not set,Set" bitfld.long 0x0 0. "CT0,Claim Tag 0 Set" "Not set,Set" group.long c14:0x0697++0x00 line.long 0x00 "DBGCLAIMCLR,Claim Tag register Clear" bitfld.long 0x0 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared" bitfld.long 0x0 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared" bitfld.long 0x0 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared" newline bitfld.long 0x0 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared" bitfld.long 0x0 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared" bitfld.long 0x0 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared" newline bitfld.long 0x0 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared" bitfld.long 0x0 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared" rgroup.long c14:0x06E7++0x00 line.long 0x00 "DBGAUTHSTATUS,Authentication Status register" bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented" bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled" bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented" newline bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled" bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented" bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled" newline bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented" bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled" rgroup.long c14:0x7000++0x00 "Jazelle Registers" line.long 0x0 "JIDR,Jazelle ID Register" rgroup.long c14:0x7001++0x00 line.long 0x0 "JOSCR,Jazelle OS Control Register" rgroup.long c14:0x7002++0x00 line.long 0x0 "JMCR,Jazelle Main Configuration Register" tree.end tree "Breakpoint Registers" tree "Breakpoint 0" group.long c14:(0x0400+0x0)++0x00 line.long 0x00 "DBGBVR0,Breakpoint Value Register" group.long c14:(0x0500+0x0)++0x00 line.long 0x00 "DBGBCR0,Breakpoint Control Register" bitfld.long 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" bitfld.long 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2,Reserved,Reserved,A64/A32/DBGBVRn" bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 1" group.long c14:(0x0400+0x10)++0x00 line.long 0x00 "DBGBVR1,Breakpoint Value Register" group.long c14:(0x0500+0x10)++0x00 line.long 0x00 "DBGBCR1,Breakpoint Control Register" bitfld.long 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" bitfld.long 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2,Reserved,Reserved,A64/A32/DBGBVRn" bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 2" group.long c14:(0x0400+0x20)++0x00 line.long 0x00 "DBGBVR2,Breakpoint Value Register" group.long c14:(0x0500+0x20)++0x00 line.long 0x00 "DBGBCR2,Breakpoint Control Register" bitfld.long 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" bitfld.long 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2,Reserved,Reserved,A64/A32/DBGBVRn" bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 3" group.long c14:(0x0400+0x30)++0x00 line.long 0x00 "DBGBVR3,Breakpoint Value Register" group.long c14:(0x0500+0x30)++0x00 line.long 0x00 "DBGBCR3,Breakpoint Control Register" bitfld.long 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" bitfld.long 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2,Reserved,Reserved,A64/A32/DBGBVRn" bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 4" group.long c14:(0x0400+0x40)++0x00 line.long 0x00 "DBGBVR4,Breakpoint Value Register" group.long c14:(0x0101+0x40)++0x00 line.long 0x00 "DBGBXVR4,Breakpoint Extended Value Register" group.long c14:(0x0500+0x40)++0x00 line.long 0x00 "DBGBCR4,Breakpoint Control Register" bitfld.long 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" bitfld.long 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2,Reserved,Reserved,A64/A32/DBGBVRn" bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree "Breakpoint 5" group.long c14:(0x0400+0x50)++0x00 line.long 0x00 "DBGBVR5,Breakpoint Value Register" group.long c14:(0x0101+0x50)++0x00 line.long 0x00 "DBGBXVR5,Breakpoint Extended Value Register" group.long c14:(0x0500+0x50)++0x00 line.long 0x00 "DBGBCR5,Breakpoint Control Register" bitfld.long 0x00 20.--23. "BT,Breakpoint type" "Unlinked address match,Linked address match,Unlinked Context ID match,Linked Context ID match,Unlinked address mismatch,Linked address mismatch,Unlinked CONTEXTIDR_EL1 match,Linked CONTEXTIDR_EL1 match,Unlinked VMID match,Linked VMID match,Unlinked VMID + Context ID match,Linked VMID + Context ID match,Unlinked CONTEXTIDR_EL2 match,Linked CONTEXTIDR_EL2 match,Unlinked Full Context ID match,Linked Full Context ID match" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." newline bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" bitfld.long 0x0 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,T32/DBGBVRn,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,T32/DBGBVRn+2,Reserved,Reserved,A64/A32/DBGBVRn" bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" newline bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" tree.end tree.end tree "Watchpoint Registers" tree "Watchpoint 0" group.long c14:(0x0600+0x0)++0x00 line.long 0x00 "DBGWVR0,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "ADDRESS,Data address" group.long c14:(0x0700+0x0)++0x00 line.long 0x00 "DBGWCR0,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree "Watchpoint 1" group.long c14:(0x0600+0x10)++0x00 line.long 0x00 "DBGWVR1,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "ADDRESS,Data address" group.long c14:(0x0700+0x10)++0x00 line.long 0x00 "DBGWCR1,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree "Watchpoint 2" group.long c14:(0x0600+0x20)++0x00 line.long 0x00 "DBGWVR2,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "ADDRESS,Data address" group.long c14:(0x0700+0x20)++0x00 line.long 0x00 "DBGWCR2,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree "Watchpoint 3" group.long c14:(0x0600+0x30)++0x00 line.long 0x00 "DBGWVR3,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "ADDRESS,Data address" group.long c14:(0x0700+0x30)++0x00 line.long 0x00 "DBGWCR3,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode" bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled" tree.end tree.end tree "DynamIQ Shared Unit" tree "Cluster Control Registers" if (((per.l(c15:0x003F))&0x2000)==0x00) rgroup.long c15:0x003F++0x00 line.long 0x00 "CLUSTERCFR,Cluster Configuration Register" bitfld.long 0x00 24.--27. "NPE,Number of processing elements" "1,2,?..." newline bitfld.long 0x00 17. "CRSP3,Core 3 Register slice present" "Not present,Present" bitfld.long 0x00 16. "CRSP2,Core 2 Register slice present" "Not present,Present" bitfld.long 0x00 15. "CRSP1,Core 1 Register slice present" "Not present,Present" newline bitfld.long 0x00 14. "CRSP0,Core 0 Register slice present" "Not present,Present" bitfld.long 0x00 13. "BUS_INTERFACE_EXT,Bus interface extended" "Not extended,Extended" bitfld.long 0x00 12. "PPP,Peripheral port present" "Not present,Present" newline bitfld.long 0x00 11. "ACP,ACP interface present" "Not present,Present" bitfld.long 0x00 9.--10. "BUS_INTERFACE,Bus interface configuration" "Single 128-bit ACE,Dual 128-bit ACE,Single 128-bit CHI,Single 256-bit CHI" bitfld.long 0x00 8. "SCU_L3_ECC,SCU-L3 is configured with ECC" "No ECC,ECC" newline bitfld.long 0x00 7. "L3_DATA_RAM_RS,L3 data RAM Register slice present" "Not present,Present" bitfld.long 0x00 6. "L3_DATA_RAM_RL,L3 data RAM read latency" "2 cycles,3 cycles" bitfld.long 0x00 5. "L3_DATA_RAM_WL,L3 data RAM write latency" "1 cycle,2 cycles" newline bitfld.long 0x00 4. "L3_CACHE_PRESENT,L3 cache present" "Not present,Present" bitfld.long 0x00 0.--2. "NOC,Number of cores present in the cluster" "1,2,3,4,?..." else rgroup.long c15:0x003F++0x00 line.long 0x00 "CLUSTERCFR,Cluster Configuration Register" bitfld.long 0x00 24.--27. "NPE,Number of processing elements" "1,2,?..." newline bitfld.long 0x00 17. "CRSP3,Core 3 Register slice present" "Not present,Present" bitfld.long 0x00 16. "CRSP2,Core 2 Register slice present" "Not present,Present" bitfld.long 0x00 15. "CRSP1,Core 1 Register slice present" "Not present,Present" newline bitfld.long 0x00 14. "CRSP0,Core 0 Register slice present" "Not present,Present" bitfld.long 0x00 13. "BUS_INTERFACE_EXT,Bus interface extended" "Not extended,Extended" bitfld.long 0x00 12. "PPP,Peripheral port present" "Not present,Present" newline bitfld.long 0x00 11. "ACP,ACP interface present" "Not present,Present" bitfld.long 0x00 9.--10. "BUS_INTERFACE,Bus interface configuration" "Single 128-bit ACE,Dual 128-bit ACE,Single 128-bit CHI,Dual 256-bit CHI" bitfld.long 0x00 8. "SCU_L3_ECC,SCU-L3 is configured with ECC" "No ECC,ECC" newline bitfld.long 0x00 7. "L3_DATA_RAM_RS,L3 data RAM Register slice present" "Not present,Present" bitfld.long 0x00 6. "L3_DATA_RAM_RL,L3 data RAM read latency" "2 cycles,3 cycles" bitfld.long 0x00 5. "L3_DATA_RAM_WL,L3 data RAM write latency" "1 cycle,2 cycles" newline bitfld.long 0x00 4. "L3_CACHE_PRESENT,L3 cache present" "Not present,Present" bitfld.long 0x00 0.--2. "NOC,Number of cores present in the cluster" "1,2,3,4,?..." endif rgroup.long c15:0x013F++0x00 line.long 0x00 "CLUSTERIDR,Cluster Main Revision ID" hexmask.long.byte 0x00 4.--7. 1. "VARIANT,Indicates the variant of the DSU" hexmask.long.byte 0x00 0.--3. 1. "REVISION,Indicates the minor revision number of the DSU" rgroup.long c15:0x023F++0x00 line.long 0x00 "CLUSTERREVIDR,Cluster ECO ID" rgroup.long c15:0x033F++0x00 line.long 0x00 "CLUSTERACTLR,Cluster Auxiliary Control Register" if (((per.l(c15:0x003F))&0x600)==(0x00||0x200)) group.long c15:0x043F++0x00 line.long 0x00 "CLUSTERECTLR,Cluster Extended Control Register" bitfld.long 0x00 14. "CUEC,Cache UniqueClean eviction control" "Disabled,Enabled" bitfld.long 0x00 8.--10. "PMD,Prefetch matching delay" "1,2,4,8,16,32,64,128" bitfld.long 0x00 7. "DICA,Disable interconnect cacheable atomics" "No,Yes" newline bitfld.long 0x00 4. "IDPS,Interconnect data poisoning support" "Not supported,Supported" bitfld.long 0x00 3. "CTEC,Clean/evict to external control disable" "No,Yes" bitfld.long 0x00 2. "CFUCEC,Cache flush UniqueClean eviction control" "No,Yes" newline bitfld.long 0x00 0. "DNCWL,Disable non-cacheable write limit" "No,Yes" else group.long c15:0x043F++0x00 line.long 0x00 "CLUSTERECTLR,Cluster Extended Control Register" bitfld.long 0x00 14. "CUEC,Cache UniqueClean eviction control" "Disabled,Enabled" bitfld.long 0x00 8.--10. "PMD,Prefetch matching delay" "1,2,4,8,16,32,64,128" bitfld.long 0x00 7. "DICA,Disable interconnect cacheable atomics" "No,Yes" newline bitfld.long 0x00 4. "IDPS,Interconnect data poisoning support" "Not supported,Supported" bitfld.long 0x00 3. "CTEC,Clean/evict to external control disable" "No,Yes" bitfld.long 0x00 2. "CFUCEC,Cache flush UniqueClean eviction control" "No,Yes" endif group.long c15:0x053F++0x00 line.long 0x00 "CLUSTERPWRCTLR,Cluster Power Control Register" bitfld.long 0x00 4.--7. "CPPR,Cache portion power request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--2. "FUNC_RET_CTRL,Duration of inactivity before the DSU uses CLUSTERPACTIVE" "Disabled,2 AT ticks,8 AT ticks,32 AT ticks,64 AT ticks,128 AT ticks,256 AT ticks,512 AT ticks" group.long c15:0x063F++0x00 line.long 0x00 "CLUSTERPWRDN,Cluster Power Down Register" bitfld.long 0x00 1. "MRR,Memory retention required" "Not required,Required" bitfld.long 0x00 0. "CPR,Cluster power required" "Not required,Required" rgroup.long c15:0x073F++0x00 line.long 0x00 "CLUSTERPWRSTAT,Cluster Power Status Register" bitfld.long 0x00 4.--7. "CPPS,This bits indicates which cache portions are currently powered up and available" "No ways,Ways 0-3,Reserved,Ways 0-7,Reserved,Reserved,Reserved,Ways 0-11,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Ways 0-15" bitfld.long 0x00 1. "RWPD,Enabled memory retention when all cores are powered down" "Disabled,Enabled" bitfld.long 0x00 0. "DCPD,Disabled cluster power down when all cores are powered down" "No,Yes" group.long c15:0x004F++0x00 line.long 0x00 "CLUSTERTHREADSID,Cluster Thread Scheme ID Register" bitfld.long 0x00 0.--2. "SCHEME_ID_THREAD,Scheme ID for current thread" "0,1,2,3,4,5,6,7" group.long c15:0x014F++0x00 line.long 0x00 "CLUSTERACPSID,Cluster ACP Scheme ID Register" bitfld.long 0x00 0.--2. "SCHEME_ID_ACP,Scheme ID for ACP transactions" "0,1,2,3,4,5,6,7" group.long c15:0x024F++0x00 line.long 0x00 "CLUSTERSTASHSID,Cluster Stash Scheme ID Register" bitfld.long 0x00 0.--2. "SCHEME_ID_SR,Scheme ID for stash requests received from the interconnect" "0,1,2,3,4,5,6,7" group.long c15:0x034F++0x00 line.long 0x00 "CLUSTERPARTCR,Cluster Partition Control Register" bitfld.long 0x00 31. "W3_ID7,Way group 3 is assigned as private to scheme ID 7" "Not assigned,Assigned" bitfld.long 0x00 30. "W2_ID7,Way group 2 is assigned as private to scheme ID 7" "Not assigned,Assigned" bitfld.long 0x00 29. "W1_ID7,Way group 1 is assigned as private to scheme ID 7" "Not assigned,Assigned" newline bitfld.long 0x00 28. "W0_ID7,Way group 0 is assigned as private to scheme ID 7" "Not assigned,Assigned" bitfld.long 0x00 27. "W3_ID6,Way group 3 is assigned as private to scheme ID 6" "Not assigned,Assigned" bitfld.long 0x00 26. "W2_ID6,Way group 2 is assigned as private to scheme ID 6" "Not assigned,Assigned" newline bitfld.long 0x00 25. "W1_ID6,Way group 1 is assigned as private to scheme ID 6" "Not assigned,Assigned" bitfld.long 0x00 24. "W0_ID6,Way group 0 is assigned as private to scheme ID 6" "Not assigned,Assigned" bitfld.long 0x00 23. "W3_ID5,Way group 3 is assigned as private to scheme ID 5" "Not assigned,Assigned" newline bitfld.long 0x00 22. "W2_ID5,Way group 2 is assigned as private to scheme ID 5" "Not assigned,Assigned" bitfld.long 0x00 21. "W1_ID5,Way group 1 is assigned as private to scheme ID 5" "Not assigned,Assigned" bitfld.long 0x00 20. "W0_ID5,Way group 0 is assigned as private to scheme ID 5" "Not assigned,Assigned" newline bitfld.long 0x00 19. "W3_ID4,Way group 3 is assigned as private to scheme ID 4" "Not assigned,Assigned" bitfld.long 0x00 18. "W2_ID4,Way group 2 is assigned as private to scheme ID 4" "Not assigned,Assigned" bitfld.long 0x00 17. "W1_ID4,Way group 1 is assigned as private to scheme ID 4" "Not assigned,Assigned" newline bitfld.long 0x00 16. "W0_ID4,Way group 0 is assigned as private to scheme ID 4" "Not assigned,Assigned" bitfld.long 0x00 15. "W3_ID3,Way group 3 is assigned as private to scheme ID 3" "Not assigned,Assigned" bitfld.long 0x00 14. "W2_ID3,Way group 2 is assigned as private to scheme ID 3" "Not assigned,Assigned" newline bitfld.long 0x00 13. "W1_ID3,Way group 1 is assigned as private to scheme ID 3" "Not assigned,Assigned" bitfld.long 0x00 12. "W0_ID3,Way group 0 is assigned as private to scheme ID 3" "Not assigned,Assigned" bitfld.long 0x00 11. "W3_ID2,Way group 3 is assigned as private to scheme ID 2" "Not assigned,Assigned" newline bitfld.long 0x00 10. "W2_ID2,Way group 2 is assigned as private to scheme ID 2" "Not assigned,Assigned" bitfld.long 0x00 9. "W1_ID2,Way group 1 is assigned as private to scheme ID 2" "Not assigned,Assigned" bitfld.long 0x00 8. "W0_ID2,Way group 0 is assigned as private to scheme ID 2" "Not assigned,Assigned" newline bitfld.long 0x00 7. "W3_ID1,Way group 3 is assigned as private to scheme ID 1" "Not assigned,Assigned" bitfld.long 0x00 6. "W2_ID1,Way group 2 is assigned as private to scheme ID 1" "Not assigned,Assigned" bitfld.long 0x00 5. "W1_ID1,Way group 1 is assigned as private to scheme ID 1" "Not assigned,Assigned" newline bitfld.long 0x00 4. "W0_ID1,Way group 0 is assigned as private to scheme ID 1" "Not assigned,Assigned" bitfld.long 0x00 3. "W3_ID0,Way group 3 is assigned as private to scheme ID 0" "Not assigned,Assigned" bitfld.long 0x00 2. "W2_ID0,Way group 2 is assigned as private to scheme ID 0" "Not assigned,Assigned" newline bitfld.long 0x00 1. "W1_ID0,Way group 1 is assigned as private to scheme ID 0" "Not assigned,Assigned" bitfld.long 0x00 0. "W0_ID0,Way group 0 is assigned as private to scheme ID 0" "Not assigned,Assigned" newline group.long c15:0x044F++0x00 line.long 0x00 "CLUSTERBUSQOS,Cluster Bus QoS Control Register" bitfld.long 0x00 28.--31. "CHI_BUS_QOS_SCHEME_ID7,Value driven on the CHI bus QoS field for scheme ID 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "CHI_BUS_QOS_SCHEME_ID6,Value driven on the CHI bus QoS field for scheme ID 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 20.--23. "CHI_BUS_QOS_SCHEME_ID5,Value driven on the CHI bus QoS field for scheme ID 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "CHI_BUS_QOS_SCHEME_ID4,Value driven on the CHI bus QoS field for scheme ID 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. "CHI_BUS_QOS_SCHEME_ID3,Value driven on the CHI bus QoS field for scheme ID 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "CHI_BUS_QOS_SCHEME_ID2,Value driven on the CHI bus QoS field for scheme ID 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "CHI_BUS_QOS_SCHEME_ID1,Value driven on the CHI bus QoS field for scheme ID 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CHI_BUS_QOS_SCHEME_ID0,Value driven on the CHI bus QoS field for scheme ID 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long c15:0x054F++0x00 line.long 0x00 "CLUSTERL3HIT,Cluster L3 Hit Counter Register" group.long c15:0x064F++0x00 line.long 0x00 "CLUSTERL3MISS,Cluster L3 Miss Counter Register" group.long c15:0x074F++0x00 line.long 0x00 "CLUSTERTHREADSIDOVR,Cluster Thread Scheme ID Override Register" bitfld.long 0x00 16.--18. "SCHEME_ID_MASK,A bit set in the mask causes the matching bit to be taken from this Register rather than from the CLUSTERTHREADSID_EL1 Register" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "SCHEME_ID_THREAD,Scheme ID for this thread if masked" "0,1,2,3,4,5,6,7" tree.end tree "Error System Registers" rgroup.long c15:0x0035++0x00 line.long 0x00 "ERRIDR,Error Record ID Register" hexmask.long.word 0x00 0.--15. 1. "NUM,Number of records that can be accessed through the Error Record system Registers" group.long c15:0x0135++0x00 line.long 0x00 "ERRSELR,Error Record Select Register" bitfld.long 0x00 0. "SEL,Selects the record accessed through the Error Record system Registers" "Record 0 - Core,Record 1 - DSU" if (((per.l(c15:0x0135))&0x01)==0x00) if CORENAME()=="CORTEXA55" rgroup.long c15:0x0345++0x00 line.long 0x00 "ERXADDR,Selected Error Record Address Register" rgroup.long c15:0x0745++0x00 line.long 0x00 "ERXADDR2,Selected Error Record Address Register 2" group.long c15:0x0145++0x00 line.long 0x00 "ERXCTLR,Selected Error Record Control Register" bitfld.long 0x00 8. "CFI,Fault handling interrupt for corrected errors enable" "Disabled,Enabled" bitfld.long 0x00 3. "FI,Fault handling interrupt enable" "Disabled,Enabled" bitfld.long 0x00 2. "UI,Uncorrected error recovery interrupt enable" "Disabled,Enabled" newline bitfld.long 0x00 0. "ED,Enable error detection" "Disabled,Enabled" rgroup.long c15:0x0545++0x00 line.long 0x00 "ERXCTLR2,Selected Error Record Control Register 2" rgroup.long c15:0x0045++0x00 line.long 0x00 "ERXFR,Selected Error Record Feature Register" bitfld.long 0x00 18.--19. "CEO,Previous error syndrome is kept on a second corrected error" "Yes,?..." bitfld.long 0x00 16.--17. "DUI,Error recovery interrupt for deferred errors" "Not supported,?..." bitfld.long 0x00 15. "RP,Indicates whether a repeat counter is implemented" "Reserved,1st and 2nd counter implemented" newline bitfld.long 0x00 12.--14. "CEC,Defines whether the node implements a standard CE counter mechanism in ERRMISC0" "Reserved,Reserved,8bit error counter,?..." bitfld.long 0x00 10.--11. "CFI,Fault handling interrupt for corrected errors" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 8.--9. "UE,Uncorrected error reporting" "Reserved,Supported,?..." newline bitfld.long 0x00 6.--7. "FI,Fault handling interrupt" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 4.--5. "UI,Uncorrected error recovery interrupt" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 2.--3. "DE,Deferred errors" "Reserved,Reserved,Controllable,?..." newline bitfld.long 0x00 0.--1. "ED,Error detection and correction" "Reserved,Reserved,Controllable,?..." rgroup.long c15:0x0445++0x00 line.long 0x00 "ERXFR2,Selected Error Record Feature Register 2" group.long c15:0x0055++0x00 line.long 0x00 "ERXMISC0,Selected Error Miscellaneous Register 0" bitfld.long 0x00 28.--31. "WAY,Indicates the way that contained the error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 6.--18. 1. "INDX,Indicates the index that contained the error" newline bitfld.long 0x00 1.--3. "L,Indicates the level that contained the error" "Level 1,Level 2,?..." bitfld.long 0x00 0. "IND,Indicates the type of cache that contained the error" "Data cache(L1)/Unified cache(L2)/TLB,Instruction cache(L1)" group.long c15:0x0155++0x00 line.long 0x00 "ERXMISC1,Selected Error Miscellaneous Register 1" bitfld.long 0x00 15. "OFO,Other Error Count Overflow" "No overflow,Overflow" hexmask.long.byte 0x00 8.--14. 1. "CECO,Other Error Count" bitfld.long 0x00 7. "OFR,Repeat Error Count Overflow" "No overflow,Overflow" newline hexmask.long.byte 0x00 0.--6. 1. "CECR,Repeat Error Count" rgroup.long c15:0x0455++0x00 line.long 0x00 "ERXMISC2,Selected Error Miscellaneous Register 2" rgroup.long c15:0x0555++0x00 line.long 0x00 "ERXMISC3,Selected Error Miscellaneous Register 3" group.long c15:0x0245++0x00 line.long 0x00 "ERXSTATUS,Selected Error Record Primary Status Register" bitfld.long 0x00 31. "AV,Address Valid" "Not valid,?..." bitfld.long 0x00 30. "V,Status Register valid" "Not valid,Valid" bitfld.long 0x00 29. "UE,Uncorrected Error" "No error,>=1 error" newline bitfld.long 0x00 28. "ER,Error Reported" "No error,Error" bitfld.long 0x00 27. "OF,Error overflow" "No error,>1 error" bitfld.long 0x00 26. "MV,Miscellaneous Registers Valid" "Not valid,Valid" newline bitfld.long 0x00 24.--25. "CE,Corrected Errors" "No error,Reserved,>=1 error,?..." bitfld.long 0x00 23. "DE,Deferred Errors" "No error,>=1 error" bitfld.long 0x00 22. "PN,Poison" "No distinction,?..." newline bitfld.long 0x00 20.--21. "UET,Uncorrected Error Type" "Uncontainable,?..." abitfld.long 0x00 8.--15. "IERR,Implementation defined error code" "0x00=No error/Error not on dirty RAM,0x01=Error on L1 dirty RAM" abitfld.long 0x00 0.--7. "SERR,Primary error code" "0x00=No error,0x02=ECC/Internal data buffer,0x06=ECC/Cache data RAM,0x07=ECC/Cache tag/Dirty RAM,0x08=Parity error/TLB data RAM,0x09=Parity error/TLB tag RAM,0x15=Deferred error from slave,?..." group.long c15:0x022F++0x00 line.long 0x00 "ERXPFGCDN,Selected Error Pseudo Fault Generation Count Down Register" group.long c15:0x012F++0x00 line.long 0x00 "ERXPFGCTL,Selected Error Pseudo Fault Generation Control Register" bitfld.long 0x00 31. "CDNEN,Count down enable" "Disabled,Enabled" bitfld.long 0x00 30. "R,Restartable bit. Controls whether Error Generation Counter restarts from the ERR0PFGCDNR value or stops after reaching 0" "Counter stops,Counter restarts" bitfld.long 0x00 6. "CE,Corrected Error generation enable" "Disabled,Enabled" newline bitfld.long 0x00 5. "DE,Deferred Error generation enable" "Disabled,Enabled" bitfld.long 0x00 3. "UER,Signaled or Recoverable Error generation enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UC,Uncontainable error generation enable" "Disabled,Enabled" rgroup.long c15:0x002F++0x00 line.long 0x00 "ERXPFGF,Selected Pseudo Fault Generation Feature Register" bitfld.long 0x00 31. "PFG,Pseudo Fault Generation" "Not supported,Supported" bitfld.long 0x00 30. "R,Restartable bit" "Not supported,Controllable" bitfld.long 0x00 6. "CE,Corrected Error generation" "Not supported,Controllable" newline bitfld.long 0x00 5. "DE,Deferred Error generation" "Not supported,Controllable" bitfld.long 0x00 4. "UEO,Latent or Restartable Error generation" "Not supported,?..." bitfld.long 0x00 3. "UER,Signaled or Recoverable Error generation" "Not supported,Controllable" newline bitfld.long 0x00 2. "UEU,Unrecoverable Error generation" "Not supported,?..." bitfld.long 0x00 1. "UC,Uncontainable Error generation" "Not supported,Controllable" elif CORENAME()=="CORTEXA75" group.long c15:0x0345++0x00 line.long 0x00 "ERXADDR,Selected Error Record Address Register" bitfld.long 0x00 31. "NS,Non-secure attribute" "Secure,Non-secure" bitfld.long 0x00 30. "SI,Secure incorrect" "Correct,Incorrect" bitfld.long 0x00 29. "AI,Address incomplete or incorrect" "Correct,Not correct" newline hexmask.long.word 0x00 0.--31. 0x01 "PADDR[43:32],Physical address bits [43:32]" group.long c15:0x0745++0x00 line.long 0x00 "ERXADDR2,Selected Error Record Address Register 2" hexmask.long 0x00 0.--31. 0x01 "PADDR[31:0],Physical address" group.long c15:0x0145++0x00 line.long 0x00 "ERXCTLR,Selected Error Record Control Register" bitfld.long 0x00 8. "CFI,Fault handling interrupt for corrected errors enable" "Disabled,Enabled" bitfld.long 0x00 3. "FI,Fault handling interrupt enable" "Disabled,Enabled" bitfld.long 0x00 2. "UI,Uncorrected error recovery interrupt enable" "Disabled,Enabled" newline bitfld.long 0x00 0. "ED,Enable error detection" "Disabled,Enabled" rgroup.long c15:0x0545++0x00 line.long 0x00 "ERXCTLR2,Selected Error Record Control Register 2" rgroup.long c15:0x0045++0x00 line.long 0x00 "ERXFR,Selected Error Record Feature Register" bitfld.long 0x00 18.--19. "CEO,Previous error syndrome is kept on a second corrected error" "Yes,?..." bitfld.long 0x00 16.--17. "DUI,Error recovery interrupt for deferred errors" "Not supported,?..." bitfld.long 0x00 15. "RP,Indicates whether a repeat counter is implemented" "Reserved,1st and 2nd counter implemented" newline bitfld.long 0x00 12.--14. "CEC,Defines whether the node implements a standard CE counter mechanism in ERRMISC0" "Reserved,Reserved,8bit error counter,?..." bitfld.long 0x00 10.--11. "CFI,Fault handling interrupt for corrected errors" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 8.--9. "UE,Uncorrected error reporting" "Reserved,Supported,?..." newline bitfld.long 0x00 6.--7. "FI,Fault handling interrupt" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 4.--5. "UI,Uncorrected error recovery interrupt" "Reserved,Reserved,Controllable,?..." newline bitfld.long 0x00 0.--1. "ED,Error detection and correction" "Reserved,Reserved,Controllable,?..." rgroup.long c15:0x0445++0x00 line.long 0x00 "ERXFR2,Selected Error Record Feature Register 2" group.long c15:0x0055++0x00 line.long 0x00 "ERXMISC0,Selected Error Miscellaneous Register 0" bitfld.long 0x00 28.--31. "WAY,Indicates the way that contained the error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 6.--18. 1. "INDX,Indicates the index that contained the error" bitfld.long 0x00 5. "TLBRAM,Indicates in which TLB RAM block the error occurs" "RAM0,RAM1" newline bitfld.long 0x00 1.--3. "L,Indicates the level that contained the error" "Level 1,Level 2,?..." bitfld.long 0x00 0. "IND,Indicates the type of cache that contained the error" "Data cache(L1)/Unified cache(L2)/TLB,Instruction cache(L1)" group.long c15:0x0155++0x00 line.long 0x00 "ERXMISC1,Selected Error Miscellaneous Register 1" hexmask.long.word 0x00 0.--15. 1. "CEC,Corrected Error Count" rgroup.long c15:0x0455++0x00 line.long 0x00 "ERXMISC2,Selected Error Miscellaneous Register 2" rgroup.long c15:0x0555++0x00 line.long 0x00 "ERXMISC3,Selected Error Miscellaneous Register 3" group.long c15:0x0245++0x00 line.long 0x00 "ERXSTATUS,Selected Error Record Primary Status Register" bitfld.long 0x00 31. "AV,Address Valid" "Not valid,Valid" bitfld.long 0x00 30. "V,Status Register valid" "Not valid,Valid" bitfld.long 0x00 29. "UE,Uncorrected Error" "No error,>=1 error" newline bitfld.long 0x00 28. "ER,Error Reported" "No error,Error" bitfld.long 0x00 27. "OF,Error overflow" "No error,>1 error" bitfld.long 0x00 26. "MV,Miscellaneous Registers Valid" "Not valid,Valid" newline bitfld.long 0x00 24.--25. "CE,Corrected Errors" "No error,Reserved,>=1 error,?..." bitfld.long 0x00 23. "DE,Deferred Errors" "No error,>=1 error" bitfld.long 0x00 22. "PN,Poison" "No distinction,?..." newline bitfld.long 0x00 20.--21. "UET,Uncorrected Error Type" "Uncontainable,?..." abitfld.long 0x00 0.--7. "SERR,Primary error code" "0x00=No error,0x02=ECC/Internal data buffer,0x06=ECC/Cache data RAM,0x07=ECC/Cache tag/Dirty RAM,0x08=Parity error/TLB data RAM,0x09=Parity error/TLB tag RAM,0x15=Deferred error from slave,?..." group.long c15:0x022F++0x00 line.long 0x00 "ERXPFGCDN,Selected Error Pseudo Fault Generation Count Down Register" group.long c15:0x012F++0x00 line.long 0x00 "ERXPFGCTL,Selected Error Pseudo Fault Generation Control Register" bitfld.long 0x00 31. "CDNEN,Count down enable" "Disabled,Enabled" bitfld.long 0x00 30. "R,Restartable bit. Controls whether Error Generation Counter restarts from the ERR0PFGCDNR value or stops after reaching 0" "Counter stops,Counter restarts" bitfld.long 0x00 6. "CE,Corrected Error generation enable" "Disabled,Enabled" newline bitfld.long 0x00 5. "DE,Deferred Error generation enable" "Disabled,Enabled" bitfld.long 0x00 3. "UER,Signaled or Recoverable Error generation enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UC,Uncontainable error generation enable" "Disabled,Enabled" rgroup.long c15:0x002F++0x00 line.long 0x00 "ERXPFGF,Selected Pseudo Fault Generation Feature Register" bitfld.long 0x00 31. "PFG,Pseudo Fault Generation" "Reserved,Supported" bitfld.long 0x00 30. "R,Restartable bit" "Reserved,Controllable" bitfld.long 0x00 6. "CE,Corrected Error generation" "Reserved,Controllable" newline bitfld.long 0x00 5. "DE,Deferred Error generation" "Reserved,Controllable" bitfld.long 0x00 4. "UEO,Latent or Restartable Error generation" "Not supported,?..." bitfld.long 0x00 3. "UER,Signaled or Recoverable Error generation" "Not supported,?..." newline bitfld.long 0x00 2. "UEU,Unrecoverable Error generation" "Not supported,?..." bitfld.long 0x00 1. "UC,Uncontainable Error generation" "Reserved,Controllable" endif else rgroup.long c15:0x0345++0x00 line.long 0x00 "ERXADDR,Selected Error Record Address Register" rgroup.long c15:0x0745++0x00 line.long 0x00 "ERXADDR2,Selected Error Record Address Register 2" group.long c15:0x0145++0x00 line.long 0x00 "ERXCTLR,Selected Error Record Control Register" bitfld.long 0x00 8. "CFI,Fault handling interrupt for corrected errors enable" "Disabled,Enabled" bitfld.long 0x00 3. "FI,Fault handling interrupt enable" "Disabled,Enabled" bitfld.long 0x00 2. "UI,Uncorrected error recovery interrupt enable" "Disabled,Enabled" newline bitfld.long 0x00 0. "ED,Error reporting and logging enable" "Disabled,Enabled" rgroup.long c15:0x0545++0x00 line.long 0x00 "ERXCTLR2,Selected Error Record Control Register 2" rgroup.long c15:0x0045++0x00 line.long 0x00 "ERXFR,Selected Error Record Feature Register" bitfld.long 0x00 18.--19. "CEO,Previous error syndrome is kept on a second corrected error" "Yes,?..." bitfld.long 0x00 16.--17. "DUI,Error recovery interrupt for deferred errors" "Not supported,?..." bitfld.long 0x00 15. "RP,Indicates whether a repeat counter is implemented" "Reserved,1st and 2nd counter implemented" newline bitfld.long 0x00 12.--14. "CEC,Defines whether the node implements a standard CE counter mechanism in ERRMISC0" "Reserved,Reserved,8bit error counter,?..." bitfld.long 0x00 10.--11. "CFI,Fault handling interrupt for corrected errors" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 8.--9. "UE,Uncorrected error reporting" "Reserved,Supported,?..." newline bitfld.long 0x00 6.--7. "FI,Fault handling interrupt" "Reserved,Reserved,Controllable,?..." bitfld.long 0x00 4.--5. "UI,Uncorrected error recovery interrupt" ",Reserved,Controllable,?..." bitfld.long 0x00 2.--3. "DE,Deferred errors" "Reserved,Always enabled,?..." newline bitfld.long 0x00 0.--1. "ED,Error detection and correction" "Reserved,Reserved,Controllable,?..." rgroup.long c15:0x0445++0x00 line.long 0x00 "ERXFR2,Selected Error Record Feature Register 2" group.long c15:0x0055++0x00 line.long 0x00 "ERXMISC0,Selected Error Miscellaneous Register 0" bitfld.long 0x00 28.--31. "WAY,Indicates the way that contained the error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 6.--18. 1. "INDX,Indicates the index that contained the error" newline bitfld.long 0x00 1.--3. "L,Indicates the level that contained the error" "Reserved,Reserved,Level 3,?..." bitfld.long 0x00 0. "IND,Indicates the type of cache that contained the error" "L3 cache," group.long c15:0x0155++0x00 line.long 0x00 "ERXMISC1,Selected Error Miscellaneous Register 1" bitfld.long 0x00 15. "OFO,Other Error Count Overflow" "No overflow,Overflow" hexmask.long.byte 0x00 8.--14. 1. "CECO,Other Error Count" bitfld.long 0x00 7. "OFR,Repeat Error Count Overflow" "No overflow,Overflow" newline hexmask.long.byte 0x00 0.--6. 1. "CECR,Repeat Error Count" rgroup.long c15:0x0455++0x00 line.long 0x00 "ERXMISC2,Selected Error Miscellaneous Register 2" rgroup.long c15:0x0555++0x00 line.long 0x00 "ERXMISC3,Selected Error Miscellaneous Register 3" group.long c15:0x0245++0x00 line.long 0x00 "ERXSTATUS,Selected Error Record Primary Status Register" bitfld.long 0x00 31. "AV,Address Valid" "Not valid,?..." bitfld.long 0x00 30. "V,Status Register valid" "Not valid,Valid" bitfld.long 0x00 29. "UE,Uncorrected Error" "No error,>=1 error" newline bitfld.long 0x00 28. "ER,Error Reported" "No error,?..." bitfld.long 0x00 27. "OF,Error overflow" "No error,>1 error" bitfld.long 0x00 26. "MV,Miscellaneous Registers Valid" "Not valid,Valid" newline bitfld.long 0x00 24.--25. "CE,Corrected Errors" "No error,Reserved,>=1 error,?..." bitfld.long 0x00 23. "DE,Deferred Errors" "No error,>=1 error" bitfld.long 0x00 22. "PN,Poison" "No distinction,Uncorrected error" newline bitfld.long 0x00 20.--21. "UET,Uncorrected Error Type" "Uncontainable,?..." abitfld.long 0x00 8.--15. "IERR,Implementation defined error code" "0x00=No error/Error on other RAMs,0x02=Error on a L3 snoop filter RAM" abitfld.long 0x00 0.--7. "SERR,Primary error code" "0x00=No error,0x02=ECC/Internal data buffer,0x06=ECC/Cache data RAM,0x07=ECC/Cache tag/Dirty RAM,0x12=Bus error" group.long c15:0x022F++0x00 line.long 0x00 "ERXPFGCDN,Selected Error Pseudo Fault Generation Count Down Register" group.long c15:0x012F++0x00 line.long 0x00 "ERXPFGCTL,Selected Error Pseudo Fault Generation Control Register" bitfld.long 0x00 31. "CDNEN,Count down enable" "Disabled,Enabled" bitfld.long 0x00 30. "R,Restartable bit. Controls whether Error Generation Counter restarts from the ERR0PFGCDNR value or stops after reaching 0" "Counter stops,Counter restarts" bitfld.long 0x00 6. "CE,Corrected Error generation enable" "Disabled,Enabled" newline bitfld.long 0x00 5. "DE,Deferred Error generation enable" "Disabled,Enabled" bitfld.long 0x00 1. "UC,Uncontainable error generation enable" "Disabled,Enabled" rgroup.long c15:0x002F++0x00 line.long 0x00 "ERXPFGF,Selected Pseudo Fault Generation Feature Register" bitfld.long 0x00 31. "PFG,Pseudo Fault Generation" "Not supported,Supported" bitfld.long 0x00 30. "R,Restartable bit" "Not supported,Controllable" bitfld.long 0x00 6. "CE,Corrected Error generation" "Not supported,Controllable" newline bitfld.long 0x00 5. "DE,Deferred Error generation" "Not supported,Controllable" bitfld.long 0x00 4. "UEO,Latent or Restartable Error generation" "Not supported,Controllable" bitfld.long 0x00 3. "UER,Signaled or Recoverable Error generation" "Not supported,Controllable" newline bitfld.long 0x00 2. "UEU,Unrecoverable Error generation" "Not supported,Controllable" bitfld.long 0x00 1. "UC,Uncontainable Error generation" "Not supported,Controllable" endif tree.end tree "Cluster PMU Registers" group.long c15:0x005F++0x00 line.long 0x00 "CLUSTERPMCR,Cluster Performance Monitors Control Register" hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code" hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code" bitfld.long 0x00 11.--15. "N,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 4. "X,Export of events Enable" "Disabled," bitfld.long 0x00 2. "C,Clock Counter Reset" "No reset,Reset" bitfld.long 0x00 1. "P,Event Counter Reset" "No reset,Reset" newline bitfld.long 0x00 0. "E,All Counters Enable" "Disabled,Enabled" newline group.long c15:0x015F++0x00 line.long 0x00 "CLUSTERPMCNTENSET,Cluster Count Enable Set Register" bitfld.long 0x00 31. "C,Enables the cycle counter Register [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.long 0x00 5. "P5,Event counter PMN 5 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 4. "P4,Event counter PMN 4 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 3. "P3,Event counter PMN 3 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.long 0x00 2. "P2,Event counter PMN 2 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 1. "P1,Event counter PMN 1 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 0. "P0,Event counter PMN 0 enable bit [Read/Write]" "Disabled/No effect,Enabled/Enable" group.long c15:0x025F++0x00 line.long 0x00 "CLUSTERPMCNTENCLR,Cluster Count Enable Clear Register" bitfld.long 0x00 31. "C,Disables the cycle counter Register [Read/Write]" "Disabled/No effect,Enabled/Disable" newline bitfld.long 0x00 5. "P5,Event counter PMN 5 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.long 0x00 4. "P4,Event counter PMN 4 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.long 0x00 3. "P3,Event counter PMN 3 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" newline bitfld.long 0x00 2. "P2,Event counter PMN 2 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.long 0x00 1. "P1,Event counter PMN 1 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" bitfld.long 0x00 0. "P0,Event counter PMN 0 disable bit [Read/Write]" "Disabled/No effect,Enabled/Disable" group.long c15:0x035F++0x00 line.long 0x00 "CLUSTERPMOVSSET,Cluster Overflow Flag Status Set" bitfld.long 0x00 31. "C,PMCCNTR overflow bit [Read/Write]" "No overflow/No effect,Overflow/Set" newline bitfld.long 0x00 5. "P5,PMN5 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.long 0x00 4. "P4,PMN4 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.long 0x00 3. "P3,PMN3 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" newline bitfld.long 0x00 2. "P2,PMN2 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.long 0x00 1. "P1,PMN1 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" bitfld.long 0x00 0. "P0,PMN0 Overflow set bit [Read/Write]" "No overflow/No effect,Overflow/Set" group.long c15:0x045F++0x00 line.long 0x00 "CLUSTERPMOVSCLR,Cluster Overflow Flag Status Clear" eventfld.long 0x00 31. "C,PMCCNTR overflow bit [Read/Write]" "No overflow/No effect,Overflow/Clear" newline eventfld.long 0x00 5. "P5,PMN5 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.long 0x00 4. "P4,PMN4 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.long 0x00 3. "P3,PMN3 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" newline eventfld.long 0x00 2. "P2,PMN2 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.long 0x00 1. "P1,PMN1 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" eventfld.long 0x00 0. "P0,PMN0 Overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear" group.long c15:0x055F++0x00 line.long 0x00 "CLUSTERPMSELR,Cluster Event Counter Selection Register" bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long c15:0x065F++0x00 line.long 0x00 "CLUSTERPMINTENSET,Cluster Interrupt Enable Set Register" bitfld.long 0x00 31. "C,PMCCNTR Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" newline bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Request Enable [Read/Write]" "Disabled/No effect,Enabled/Enable" group.long c15:0x075F++0x00 line.long 0x00 "CLUSTERPMINTENCLR,Cluster Interrupt Enable Clear Register" eventfld.long 0x00 31. "C,PMCCNTR Overflow Interrupt Request Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" newline eventfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" newline eventfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" eventfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Disable [Read/Write]" "Disabled/No effect,Enabled/Disable" group.quad c15:0x006F++0x01 line.quad 0x00 "CLUSTERPMCCNTR,Cluster Performance Monitors Cycle Counter" if (((per.l(c15:0x016F))&0x80000000)==0x80000000) group.long c15:0x016F++0x00 line.long 0x00 "CLUSTERPMXEVTYPER,Cluster Selected Event Type and Filter Register" bitfld.long 0x00 31. "S,Secure events filtering bit. Controls counting of events that are generated by Secure transactions" "Count Secure events,Not count Secure events" bitfld.long 0x00 29. "NS,Non-secure events filtering bit. Controls counting of events that are generated by Non-secure transactions" "Not count Non-secure events,Count Non-secure events" hexmask.long.word 0x00 0.--15. 1. "EVTCOUNT,Event number" else group.long c15:0x016F++0x00 line.long 0x00 "CLUSTERPMXEVTYPER,Cluster Selected Event Type and Filter Register" bitfld.long 0x00 31. "S,Secure events filtering bit. Controls counting of events that are generated by Secure transactions" "Count Secure events,Not count Secure events" bitfld.long 0x00 29. "NS,Non-secure events filtering bit. Controls counting of events that are generated by Non-secure transactions" "Count Non-secure events,Not count Non-secure events" hexmask.long.word 0x00 0.--15. 1. "EVTCOUNT,Event number" endif group.long c15:0x026F++0x00 line.long 0x00 "CLUSTERPMXEVCNTR,Cluster Selected Event Counter Register" group.long c15:0x036F++0x00 line.long 0x00 "CLUSTERPMMDCR,Cluster Monitor Debug Configuration Register" bitfld.long 0x00 0. "SPME,Secure Performance Monitors Enable" "Disabled,Enabled" tree.open "Common Event Identification Registers" rgroup.long c15:0x046F++0x00 line.long 0x00 "CLUSTERPMCEID0,Cluster Common Event Identification ID0 Register" bitfld.long 0x00 30. "CHAIN,Chain" "Reserved,Implemented" bitfld.long 0x00 29. "BUS_CYCLES,Bus cycle" "Reserved,Implemented" bitfld.long 0x00 26. "MEMORY_ERROR,Local memory error" "Reserved,Implemented" newline bitfld.long 0x00 25. "BUS_ACCESS,Bus access" "Reserved,Implemented" bitfld.long 0x00 17. "CPU_CYCLES,CPU Cycle" "Reserved,Implemented" rgroup.long c15:0x056F++0x00 line.long 0x00 "CLUSTERPMCEID1,Cluster Common Event Identification ID1 Register" bitfld.long 0x00 12. "L3D_CACHE_WB,Attributable Level 3 data or unified cache write-back" "Reserved,Implemented" bitfld.long 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Reserved,Implemented" bitfld.long 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Reserved,Implemented" newline bitfld.long 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Reserved,Implemented" tree.end newline group.long c15:0x066F++0x00 line.long 0x00 "CLUSTERPMCLAIMSET,Cluster Performance Monitor Claim Tag Set Register" bitfld.long 0x00 3. "S[3],Set bit 3" "Low,High" bitfld.long 0x00 2. "S[2],Set bit 2" "Low,High" bitfld.long 0x00 1. "S[1],Set bit 1" "Low,High" newline bitfld.long 0x00 0. "S[0],Set bit 0" "Low,High" group.long c15:0x076F++0x00 line.long 0x00 "CLUSTERPMCLAIMCLR,Cluster Performance Monitor Claim Tag Clear Register" bitfld.long 0x00 3. "C[3],Clear bit 3" "Low,High" bitfld.long 0x00 2. "C[2],Clear bit 2" "Low,High" bitfld.long 0x00 1. "C[1],Clear bit 1" "Low,High" newline bitfld.long 0x00 0. "C[0],Clear bit 0" "Low,High" tree.end tree.end tree.end AUTOINDENT.OFF AUTOINDENT.POP tree "Interrupt Controller" width 17. base ad:(per.long(spr:0x31F30)&0xFFFC0000) tree "Distributor Interface" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x400)==0x400) if PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)) group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Secure access)" bitfld.long 0x00 1. " ENABLEGRP1 ,Global Interrupt Enable Group 1" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Global Interrupt Enable Group 1" "Disabled,Enabled" else group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Non-secure access)" bitfld.long 0x00 0. " ENABLE ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled" endif else group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register" bitfld.long 0x00 0. " ENABLE ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x400)==0x400) rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 11.--15. " LSPI ,Locable Shared Peripheral Interrupts" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10. " SECURITYEXTN ,Indicate whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..." bitfld.long 0x00 0.--4. " ITLN ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020" else rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 10. " SECURITYEXTN ,Indicates whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..." bitfld.long 0x00 0.--4. " ITLN ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020" endif rgroup.long 0x0008++0x03 line.long 0x00 "GICD_IIDR,Distributor Implementer Identification Register" bitfld.long 0x00 24.--31. " PRODID ,Indicates the product ID" "PL390,PL390,GIC400,GIC400,?..." bitfld.long 0x00 16.--19. " VAR ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " REV ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" sif CPU.FEATURE(hypervisor)||CPU.FEATURE(secure) width 17. tree "Group/Security Registers" if PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x0080) group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Secure Access)" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0 (Secure),Group 1 (Non-secure)" else group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Non-secure access)" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0,Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0,Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0,Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0,Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0,Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0,Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0,Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0,Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0,Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0,Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0,Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0,Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0,Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0,Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0,Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0,Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0,Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0,Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0,Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0,Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0,Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0,Group 1" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x0084)) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Secure Access)" bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Non-secure access)" bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Group 0,Group 1" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Group 0,Group 1" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Group 0,Group 1" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Group 0,Group 1" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Group 0,Group 1" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Group 0,Group 1" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Group 0,Group 1" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Group 0,Group 1" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Group 0,Group 1" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Group 0,Group 1" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Group 0,Group 1" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Group 0,Group 1" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Group 0,Group 1" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Group 0,Group 1" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Group 0,Group 1" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Group 0,Group 1" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Group 0,Group 1" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Group 0,Group 1" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Group 0,Group 1" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Group 0,Group 1" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Group 0,Group 1" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Group 0,Group 1" else rgroup.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x0088)) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Secure access)" bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Non-secure access)" bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Group 0,Group 1" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Group 0,Group 1" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Group 0,Group 1" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Group 0,Group 1" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Group 0,Group 1" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Group 0,Group 1" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Group 0,Group 1" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Group 0,Group 1" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Group 0,Group 1" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Group 0,Group 1" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Group 0,Group 1" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Group 0,Group 1" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Group 0,Group 1" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Group 0,Group 1" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Group 0,Group 1" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Group 0,Group 1" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Group 0,Group 1" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Group 0,Group 1" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Group 0,Group 1" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Group 0,Group 1" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Group 0,Group 1" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Group 0,Group 1" else rgroup.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x008C)) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Secure access)" bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Non-secure access)" bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0,Group 1" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Group 0,Group 1" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0,Group 1" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Group 0,Group 1" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0,Group 1" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Group 0,Group 1" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0,Group 1" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Group 0,Group 1" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0,Group 1" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Group 0,Group 1" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0,Group 1" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Group 0,Group 1" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0,Group 1" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Group 0,Group 1" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0,Group 1" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Group 0,Group 1" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0,Group 1" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Group 0,Group 1" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0,Group 1" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Group 0,Group 1" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Group 0,Group 1" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Group 0,Group 1" else rgroup.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x0090)) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Secure access)" bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Non-secure access)" bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0,Group 1" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Group 0,Group 1" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0,Group 1" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Group 0,Group 1" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0,Group 1" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Group 0,Group 1" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0,Group 1" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Group 0,Group 1" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0,Group 1" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Group 0,Group 1" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0,Group 1" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Group 0,Group 1" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0,Group 1" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Group 0,Group 1" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0,Group 1" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Group 0,Group 1" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0,Group 1" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Group 0,Group 1" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0,Group 1" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Group 0,Group 1" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0,Group 1" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Group 0,Group 1" else rgroup.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x0094)) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Secure access)" bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Non-secure access)" bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0,Group 1" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Group 0,Group 1" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0,Group 1" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Group 0,Group 1" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0,Group 1" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Group 0,Group 1" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0,Group 1" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Group 0,Group 1" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0,Group 1" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Group 0,Group 1" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0,Group 1" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Group 0,Group 1" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0,Group 1" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Group 0,Group 1" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0,Group 1" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Group 0,Group 1" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0,Group 1" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Group 0,Group 1" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0,Group 1" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Group 0,Group 1" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0,Group 1" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Group 0,Group 1" else rgroup.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x0098)) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Secure access)" bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Non-secure access)" bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0,Group 1" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Group 0,Group 1" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0,Group 1" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Group 0,Group 1" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0,Group 1" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Group 0,Group 1" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0,Group 1" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Group 0,Group 1" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0,Group 1" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Group 0,Group 1" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0,Group 1" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Group 0,Group 1" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0,Group 1" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Group 0,Group 1" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0,Group 1" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Group 0,Group 1" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0,Group 1" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Group 0,Group 1" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0,Group 1" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Group 0,Group 1" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0,Group 1" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Group 0,Group 1" else rgroup.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x009C)) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Secure access)" bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Non-secure access)" bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0,Group 1" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Group 0,Group 1" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0,Group 1" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Group 0,Group 1" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0,Group 1" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Group 0,Group 1" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0,Group 1" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Group 0,Group 1" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0,Group 1" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Group 0,Group 1" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0,Group 1" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Group 0,Group 1" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0,Group 1" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Group 0,Group 1" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0,Group 1" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Group 0,Group 1" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0,Group 1" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Group 0,Group 1" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0,Group 1" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Group 0,Group 1" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0,Group 1" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Group 0,Group 1" else rgroup.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00A0)) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Secure access)" bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Non-secure access)" bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0,Group 1" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Group 0,Group 1" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0,Group 1" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Group 0,Group 1" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0,Group 1" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Group 0,Group 1" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0,Group 1" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Group 0,Group 1" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0,Group 1" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Group 0,Group 1" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0,Group 1" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Group 0,Group 1" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0,Group 1" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Group 0,Group 1" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0,Group 1" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Group 0,Group 1" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0,Group 1" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Group 0,Group 1" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0,Group 1" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Group 0,Group 1" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0,Group 1" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Group 0,Group 1" else rgroup.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00A4)) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Secure access)" bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Non-secure access)" bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0,Group 1" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Group 0,Group 1" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0,Group 1" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Group 0,Group 1" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0,Group 1" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Group 0,Group 1" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0,Group 1" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Group 0,Group 1" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0,Group 1" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Group 0,Group 1" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0,Group 1" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Group 0,Group 1" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0,Group 1" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Group 0,Group 1" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0,Group 1" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Group 0,Group 1" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0,Group 1" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Group 0,Group 1" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0,Group 1" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Group 0,Group 1" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0,Group 1" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Group 0,Group 1" else rgroup.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00A8)) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Secure access)" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Non-secure access)" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0,Group 1" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Group 0,Group 1" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0,Group 1" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Group 0,Group 1" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0,Group 1" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Group 0,Group 1" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0,Group 1" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Group 0,Group 1" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0,Group 1" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Group 0,Group 1" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0,Group 1" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Group 0,Group 1" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0,Group 1" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Group 0,Group 1" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0,Group 1" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Group 0,Group 1" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0,Group 1" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Group 0,Group 1" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0,Group 1" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Group 0,Group 1" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0,Group 1" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Group 0,Group 1" else rgroup.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00AC)) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Secure access)" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Non-secure access)" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0,Group 1" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Group 0,Group 1" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0,Group 1" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Group 0,Group 1" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0,Group 1" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Group 0,Group 1" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0,Group 1" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Group 0,Group 1" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0,Group 1" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Group 0,Group 1" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0,Group 1" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Group 0,Group 1" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0,Group 1" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Group 0,Group 1" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0,Group 1" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Group 0,Group 1" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0,Group 1" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Group 0,Group 1" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0,Group 1" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Group 0,Group 1" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0,Group 1" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Group 0,Group 1" else rgroup.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00B0)) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Secure access)" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Non-secure access)" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0,Group 1" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Group 0,Group 1" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0,Group 1" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Group 0,Group 1" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0,Group 1" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Group 0,Group 1" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0,Group 1" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Group 0,Group 1" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0,Group 1" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Group 0,Group 1" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0,Group 1" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Group 0,Group 1" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0,Group 1" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Group 0,Group 1" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0,Group 1" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Group 0,Group 1" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0,Group 1" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Group 0,Group 1" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0,Group 1" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Group 0,Group 1" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0,Group 1" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Group 0,Group 1" else rgroup.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00B4)) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Secure access)" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Non-secure access)" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0,Group 1" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Group 0,Group 1" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0,Group 1" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Group 0,Group 1" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0,Group 1" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Group 0,Group 1" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0,Group 1" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Group 0,Group 1" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0,Group 1" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Group 0,Group 1" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0,Group 1" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Group 0,Group 1" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0,Group 1" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Group 0,Group 1" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0,Group 1" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Group 0,Group 1" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0,Group 1" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Group 0,Group 1" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0,Group 1" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Group 0,Group 1" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0,Group 1" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Group 0,Group 1" else rgroup.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00B8)) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Secure access)" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Non-secure access)" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0,Group 1" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Group 0,Group 1" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0,Group 1" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Group 0,Group 1" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0,Group 1" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Group 0,Group 1" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0,Group 1" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Group 0,Group 1" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0,Group 1" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Group 0,Group 1" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0,Group 1" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Group 0,Group 1" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0,Group 1" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Group 0,Group 1" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0,Group 1" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Group 0,Group 1" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0,Group 1" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Group 0,Group 1" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0,Group 1" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Group 0,Group 1" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0,Group 1" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Group 0,Group 1" else rgroup.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00BC)) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Secure access)" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Non-secure access)" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0,Group 1" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Group 0,Group 1" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0,Group 1" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Group 0,Group 1" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0,Group 1" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Group 0,Group 1" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0,Group 1" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Group 0,Group 1" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0,Group 1" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Group 0,Group 1" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0,Group 1" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Group 0,Group 1" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0,Group 1" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Group 0,Group 1" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0,Group 1" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Group 0,Group 1" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0,Group 1" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Group 0,Group 1" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0,Group 1" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Group 0,Group 1" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0,Group 1" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Group 0,Group 1" else rgroup.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00C0)) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Secure access)" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Non-secure access)" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0,Group 1" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Group 0,Group 1" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0,Group 1" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Group 0,Group 1" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0,Group 1" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Group 0,Group 1" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0,Group 1" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Group 0,Group 1" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0,Group 1" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Group 0,Group 1" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0,Group 1" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Group 0,Group 1" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0,Group 1" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Group 0,Group 1" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0,Group 1" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Group 0,Group 1" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0,Group 1" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Group 0,Group 1" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0,Group 1" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Group 0,Group 1" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0,Group 1" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Group 0,Group 1" else rgroup.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00C4)) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Secure access)" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Non-secure access)" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0,Group 1" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Group 0,Group 1" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0,Group 1" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Group 0,Group 1" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0,Group 1" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Group 0,Group 1" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0,Group 1" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Group 0,Group 1" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0,Group 1" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Group 0,Group 1" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0,Group 1" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Group 0,Group 1" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0,Group 1" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Group 0,Group 1" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0,Group 1" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Group 0,Group 1" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0,Group 1" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Group 0,Group 1" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0,Group 1" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Group 0,Group 1" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0,Group 1" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Group 0,Group 1" else rgroup.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00C8)) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Secure access)" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Non-secure access)" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0,Group 1" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Group 0,Group 1" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0,Group 1" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Group 0,Group 1" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0,Group 1" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Group 0,Group 1" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0,Group 1" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Group 0,Group 1" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0,Group 1" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Group 0,Group 1" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0,Group 1" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Group 0,Group 1" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0,Group 1" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Group 0,Group 1" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0,Group 1" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Group 0,Group 1" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0,Group 1" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Group 0,Group 1" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0,Group 1" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Group 0,Group 1" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0,Group 1" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Group 0,Group 1" else rgroup.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00CC)) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Secure access)" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Non-secure access)" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0,Group 1" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Group 0,Group 1" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0,Group 1" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Group 0,Group 1" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0,Group 1" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Group 0,Group 1" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0,Group 1" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Group 0,Group 1" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0,Group 1" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Group 0,Group 1" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0,Group 1" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Group 0,Group 1" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0,Group 1" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Group 0,Group 1" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0,Group 1" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Group 0,Group 1" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0,Group 1" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Group 0,Group 1" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0,Group 1" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Group 0,Group 1" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0,Group 1" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Group 0,Group 1" else rgroup.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00D0)) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Secure access)" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Non-secure access)" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0,Group 1" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Group 0,Group 1" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0,Group 1" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Group 0,Group 1" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0,Group 1" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Group 0,Group 1" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0,Group 1" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Group 0,Group 1" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0,Group 1" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Group 0,Group 1" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0,Group 1" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Group 0,Group 1" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0,Group 1" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Group 0,Group 1" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0,Group 1" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Group 0,Group 1" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0,Group 1" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Group 0,Group 1" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0,Group 1" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Group 0,Group 1" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0,Group 1" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Group 0,Group 1" else rgroup.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00D4)) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Secure access)" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Non-secure access)" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0,Group 1" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Group 0,Group 1" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0,Group 1" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Group 0,Group 1" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0,Group 1" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Group 0,Group 1" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0,Group 1" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Group 0,Group 1" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0,Group 1" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Group 0,Group 1" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0,Group 1" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Group 0,Group 1" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0,Group 1" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Group 0,Group 1" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0,Group 1" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Group 0,Group 1" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0,Group 1" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Group 0,Group 1" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0,Group 1" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Group 0,Group 1" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0,Group 1" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Group 0,Group 1" else rgroup.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00D8)) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Secure access)" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Non-secure access)" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0,Group 1" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Group 0,Group 1" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0,Group 1" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Group 0,Group 1" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0,Group 1" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Group 0,Group 1" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0,Group 1" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Group 0,Group 1" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0,Group 1" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Group 0,Group 1" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0,Group 1" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Group 0,Group 1" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0,Group 1" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Group 0,Group 1" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0,Group 1" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Group 0,Group 1" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0,Group 1" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Group 0,Group 1" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0,Group 1" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Group 0,Group 1" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0,Group 1" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Group 0,Group 1" else rgroup.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00DC)) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Secure access)" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Non-secure access)" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0,Group 1" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Group 0,Group 1" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0,Group 1" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Group 0,Group 1" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0,Group 1" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Group 0,Group 1" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0,Group 1" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Group 0,Group 1" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0,Group 1" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Group 0,Group 1" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0,Group 1" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Group 0,Group 1" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0,Group 1" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Group 0,Group 1" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0,Group 1" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Group 0,Group 1" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0,Group 1" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Group 0,Group 1" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0,Group 1" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Group 0,Group 1" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0,Group 1" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Group 0,Group 1" else rgroup.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00E0)) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Secure access)" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Non-secure access)" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0,Group 1" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Group 0,Group 1" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0,Group 1" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Group 0,Group 1" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0,Group 1" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Group 0,Group 1" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0,Group 1" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Group 0,Group 1" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0,Group 1" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Group 0,Group 1" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0,Group 1" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Group 0,Group 1" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0,Group 1" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Group 0,Group 1" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0,Group 1" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Group 0,Group 1" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0,Group 1" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Group 0,Group 1" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0,Group 1" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Group 0,Group 1" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0,Group 1" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Group 0,Group 1" else rgroup.long 0x0E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00E4)) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Secure access)" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Non-secure access)" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0,Group 1" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Group 0,Group 1" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0,Group 1" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Group 0,Group 1" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0,Group 1" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Group 0,Group 1" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0,Group 1" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Group 0,Group 1" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0,Group 1" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Group 0,Group 1" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0,Group 1" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Group 0,Group 1" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0,Group 1" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Group 0,Group 1" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0,Group 1" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Group 0,Group 1" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0,Group 1" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Group 0,Group 1" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0,Group 1" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Group 0,Group 1" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0,Group 1" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Group 0,Group 1" else rgroup.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00E8)) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Secure access)" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Non-secure access)" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0,Group 1" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Group 0,Group 1" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0,Group 1" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Group 0,Group 1" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0,Group 1" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Group 0,Group 1" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0,Group 1" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Group 0,Group 1" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0,Group 1" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Group 0,Group 1" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0,Group 1" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Group 0,Group 1" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0,Group 1" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Group 0,Group 1" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0,Group 1" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Group 0,Group 1" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0,Group 1" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Group 0,Group 1" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0,Group 1" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Group 0,Group 1" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0,Group 1" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Group 0,Group 1" else rgroup.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00EC)) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Secure access)" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Non-Secure access)" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0,Group 1" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Group 0,Group 1" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0,Group 1" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Group 0,Group 1" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0,Group 1" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Group 0,Group 1" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0,Group 1" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Group 0,Group 1" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0,Group 1" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Group 0,Group 1" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0,Group 1" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Group 0,Group 1" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0,Group 1" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Group 0,Group 1" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0,Group 1" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Group 0,Group 1" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0,Group 1" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Group 0,Group 1" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0,Group 1" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Group 0,Group 1" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0,Group 1" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Group 0,Group 1" else rgroup.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00F0)) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Secure access)" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Non-secure access)" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0,Group 1" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Group 0,Group 1" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0,Group 1" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Group 0,Group 1" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0,Group 1" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Group 0,Group 1" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0,Group 1" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Group 0,Group 1" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0,Group 1" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Group 0,Group 1" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0,Group 1" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Group 0,Group 1" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0,Group 1" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Group 0,Group 1" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0,Group 1" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Group 0,Group 1" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0,Group 1" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Group 0,Group 1" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0,Group 1" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Group 0,Group 1" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0,Group 1" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Group 0,Group 1" else rgroup.long 0x0F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00F4)) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Secure access)" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Non-secure access)" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0,Group 1" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Group 0,Group 1" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0,Group 1" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Group 0,Group 1" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0,Group 1" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Group 0,Group 1" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0,Group 1" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Group 0,Group 1" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0,Group 1" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Group 0,Group 1" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0,Group 1" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Group 0,Group 1" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0,Group 1" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Group 0,Group 1" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0,Group 1" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Group 0,Group 1" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0,Group 1" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Group 0,Group 1" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0,Group 1" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Group 0,Group 1" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0,Group 1" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Group 0,Group 1" else rgroup.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00F8)) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Secure access)" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Non-secure access)" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0,Group 1" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Group 0,Group 1" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0,Group 1" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Group 0,Group 1" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0,Group 1" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Group 0,Group 1" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0,Group 1" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Group 0,Group 1" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0,Group 1" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Group 0,Group 1" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0,Group 1" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Group 0,Group 1" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0,Group 1" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Group 0,Group 1" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0,Group 1" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Group 0,Group 1" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0,Group 1" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Group 0,Group 1" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0,Group 1" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Group 0,Group 1" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0,Group 1" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Group 0,Group 1" else rgroup.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)==0x1F)&&(PER.ADDRESS.isSECUREEX(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x00FC)) group.long 0x00FC++0x03 line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Secure access)" bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB1018 ,Group Status Bit 1018" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB1016 ,Group Status Bit 1016" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB1015 ,Group Status Bit 1015" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB1013 ,Group Status Bit 1013" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB1012 ,Group Status Bit 1012" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB1010 ,Group Status Bit 1010" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB1009 ,Group Status Bit 1009" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB1007 ,Group Status Bit 1007" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB1006 ,Group Status Bit 1006" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB1004 ,Group Status Bit 1004" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB1003 ,Group Status Bit 1003" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB1001 ,Group Status Bit 1001" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB1000 ,Group Status Bit 1000" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB999 ,Group Status Bit 999" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB998 ,Group Status Bit 998" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB997 ,Group Status Bit 997" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB996 ,Group Status Bit 996" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB995 ,Group Status Bit 995" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB994 ,Group Status Bit 994" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB993 ,Group Status Bit 993" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB992 ,Group Status Bit 992" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)==0x1F) group.long 0x00FC++0x03 line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Non-secure access)" bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0,Group 1" bitfld.long 0x00 26. " GSB1018 ,Group Status Bit 1018" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0,Group 1" bitfld.long 0x00 24. " GSB1016 ,Group Status Bit 1016" "Group 0,Group 1" bitfld.long 0x00 23. " GSB1015 ,Group Status Bit 1015" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0,Group 1" bitfld.long 0x00 21. " GSB1013 ,Group Status Bit 1013" "Group 0,Group 1" bitfld.long 0x00 20. " GSB1012 ,Group Status Bit 1012" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0,Group 1" bitfld.long 0x00 18. " GSB1010 ,Group Status Bit 1010" "Group 0,Group 1" bitfld.long 0x00 17. " GSB1009 ,Group Status Bit 1009" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0,Group 1" bitfld.long 0x00 15. " GSB1007 ,Group Status Bit 1007" "Group 0,Group 1" bitfld.long 0x00 14. " GSB1006 ,Group Status Bit 1006" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0,Group 1" bitfld.long 0x00 12. " GSB1004 ,Group Status Bit 1004" "Group 0,Group 1" bitfld.long 0x00 11. " GSB1003 ,Group Status Bit 1003" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0,Group 1" bitfld.long 0x00 9. " GSB1001 ,Group Status Bit 1001" "Group 0,Group 1" bitfld.long 0x00 8. " GSB1000 ,Group Status Bit 1000" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB999 ,Group Status Bit 999" "Group 0,Group 1" bitfld.long 0x00 6. " GSB998 ,Group Status Bit 998" "Group 0,Group 1" bitfld.long 0x00 5. " GSB997 ,Group Status Bit 997" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB996 ,Group Status Bit 996" "Group 0,Group 1" bitfld.long 0x00 3. " GSB995 ,Group Status Bit 995" "Group 0,Group 1" bitfld.long 0x00 2. " GSB994 ,Group Status Bit 994" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB993 ,Group Status Bit 993" "Group 0,Group 1" bitfld.long 0x00 0. " GSB992 ,Group Status Bit 992" "Group 0,Group 1" else rgroup.long 0x00FC++0x03 line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end endif width 24. tree "Set/Clear Enable Registers" group.long 0x0100++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31 ,Set/Clear Enable Bit 31" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB30 ,Set/Clear Enable Bit 30" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB29 ,Set/Clear Enable Bit 29" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28 ,Set/Clear Enable Bit 28" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB27 ,Set/Clear Enable Bit 27" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB26 ,Set/Clear Enable Bit 26" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25 ,Set/Clear Enable Bit 25" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB24 ,Set/Clear Enable Bit 24" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB23 ,Set/Clear Enable Bit 23" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22 ,Set/Clear Enable Bit 22" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB21 ,Set/Clear Enable Bit 21" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB20 ,Set/Clear Enable Bit 20" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19 ,Set/Clear Enable Bit 19" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB18 ,Set/Clear Enable Bit 18" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB17 ,Set/Clear Enable Bit 17" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16 ,Set/Clear Enable Bit 16" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB15 ,Set/Clear Enable Bit 15" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB14 ,Set/Clear Enable Bit 14" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB13 ,Set/Clear Enable Bit 13" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB12 ,Set/Clear Enable Bit 12" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB11 ,Set/Clear Enable Bit 11" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB10 ,Set/Clear Enable Bit 10" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB9 ,Set/Clear Enable Bit 9" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB8 ,Set/Clear Enable Bit 8" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB7 ,Set/Clear Enable Bit 7" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB6 ,Set/Clear Enable Bit 6" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB5 ,Set/Clear Enable Bit 5" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB4 ,Set/Clear Enable Bit 4" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB3 ,Set/Clear Enable Bit 3" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB2 ,Set/Clear Enable Bit 2" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB1 ,Set/Clear Enable Bit 1" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB0 ,Set/Clear Enable Bit 0" "Disabled,Enabled" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) group.long 0x0104++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB63 ,Set/Clear Enable Bit 63" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB62 ,Set/Clear Enable Bit 62" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB61 ,Set/Clear Enable Bit 61" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB60 ,Set/Clear Enable Bit 60" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB59 ,Set/Clear Enable Bit 59" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB58 ,Set/Clear Enable Bit 58" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB57 ,Set/Clear Enable Bit 57" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB56 ,Set/Clear Enable Bit 56" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB55 ,Set/Clear Enable Bit 55" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB54 ,Set/Clear Enable Bit 54" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB53 ,Set/Clear Enable Bit 53" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB52 ,Set/Clear Enable Bit 52" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB51 ,Set/Clear Enable Bit 51" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB50 ,Set/Clear Enable Bit 50" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB49 ,Set/Clear Enable Bit 49" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB48 ,Set/Clear Enable Bit 48" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB47 ,Set/Clear Enable Bit 47" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB46 ,Set/Clear Enable Bit 46" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB45 ,Set/Clear Enable Bit 45" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB44 ,Set/Clear Enable Bit 44" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB43 ,Set/Clear Enable Bit 43" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB42 ,Set/Clear Enable Bit 42" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB41 ,Set/Clear Enable Bit 41" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB40 ,Set/Clear Enable Bit 40" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB39 ,Set/Clear Enable Bit 39" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB38 ,Set/Clear Enable Bit 38" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB37 ,Set/Clear Enable Bit 37" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB36 ,Set/Clear Enable Bit 36" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB35 ,Set/Clear Enable Bit 35" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB34 ,Set/Clear Enable Bit 34" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB33 ,Set/Clear Enable Bit 33" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB32 ,Set/Clear Enable Bit 32" "Disabled,Enabled" else rgroup.long 0x0104++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) group.long 0x0108++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB95 ,Set/Clear Enable Bit 95" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB94 ,Set/Clear Enable Bit 94" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB93 ,Set/Clear Enable Bit 93" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB92 ,Set/Clear Enable Bit 92" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB91 ,Set/Clear Enable Bit 91" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB90 ,Set/Clear Enable Bit 90" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB89 ,Set/Clear Enable Bit 89" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB88 ,Set/Clear Enable Bit 88" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB87 ,Set/Clear Enable Bit 87" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB86 ,Set/Clear Enable Bit 86" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB85 ,Set/Clear Enable Bit 85" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB84 ,Set/Clear Enable Bit 84" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB83 ,Set/Clear Enable Bit 83" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB82 ,Set/Clear Enable Bit 82" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB81 ,Set/Clear Enable Bit 81" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB80 ,Set/Clear Enable Bit 80" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB79 ,Set/Clear Enable Bit 79" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB78 ,Set/Clear Enable Bit 78" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB77 ,Set/Clear Enable Bit 77" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB76 ,Set/Clear Enable Bit 76" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB75 ,Set/Clear Enable Bit 75" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB74 ,Set/Clear Enable Bit 74" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB73 ,Set/Clear Enable Bit 73" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB72 ,Set/Clear Enable Bit 72" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB71 ,Set/Clear Enable Bit 71" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB70 ,Set/Clear Enable Bit 70" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB69 ,Set/Clear Enable Bit 69" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB68 ,Set/Clear Enable Bit 68" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB67 ,Set/Clear Enable Bit 67" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB66 ,Set/Clear Enable Bit 66" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB65 ,Set/Clear Enable Bit 65" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB64 ,Set/Clear Enable Bit 64" "Disabled,Enabled" else rgroup.long 0x0108++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) group.long 0x010C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB127 ,Set/Clear Enable Bit 127" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB126 ,Set/Clear Enable Bit 126" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB125 ,Set/Clear Enable Bit 125" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB124 ,Set/Clear Enable Bit 124" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB123 ,Set/Clear Enable Bit 123" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB122 ,Set/Clear Enable Bit 122" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB121 ,Set/Clear Enable Bit 121" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB120 ,Set/Clear Enable Bit 120" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB119 ,Set/Clear Enable Bit 119" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB118 ,Set/Clear Enable Bit 118" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB117 ,Set/Clear Enable Bit 117" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB116 ,Set/Clear Enable Bit 116" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB115 ,Set/Clear Enable Bit 115" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB114 ,Set/Clear Enable Bit 114" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB113 ,Set/Clear Enable Bit 113" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB112 ,Set/Clear Enable Bit 112" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB111 ,Set/Clear Enable Bit 111" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB110 ,Set/Clear Enable Bit 110" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB109 ,Set/Clear Enable Bit 109" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB108 ,Set/Clear Enable Bit 108" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB107 ,Set/Clear Enable Bit 107" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB106 ,Set/Clear Enable Bit 106" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB105 ,Set/Clear Enable Bit 105" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB104 ,Set/Clear Enable Bit 104" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB103 ,Set/Clear Enable Bit 103" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB102 ,Set/Clear Enable Bit 102" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB101 ,Set/Clear Enable Bit 101" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB100 ,Set/Clear Enable Bit 100" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB99 ,Set/Clear Enable Bit 99" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB98 ,Set/Clear Enable Bit 98" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB97 ,Set/Clear Enable Bit 97" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB96 ,Set/Clear Enable Bit 96" "Disabled,Enabled" else rgroup.long 0x010C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) group.long 0x0110++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB159 ,Set/Clear Enable Bit 159" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB158 ,Set/Clear Enable Bit 158" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB157 ,Set/Clear Enable Bit 157" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB156 ,Set/Clear Enable Bit 156" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB155 ,Set/Clear Enable Bit 155" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB154 ,Set/Clear Enable Bit 154" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB153 ,Set/Clear Enable Bit 153" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB152 ,Set/Clear Enable Bit 152" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB151 ,Set/Clear Enable Bit 151" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB150 ,Set/Clear Enable Bit 150" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB149 ,Set/Clear Enable Bit 149" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB148 ,Set/Clear Enable Bit 148" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB147 ,Set/Clear Enable Bit 147" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB146 ,Set/Clear Enable Bit 146" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB145 ,Set/Clear Enable Bit 145" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB144 ,Set/Clear Enable Bit 144" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB143 ,Set/Clear Enable Bit 143" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB142 ,Set/Clear Enable Bit 142" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB141 ,Set/Clear Enable Bit 141" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB140 ,Set/Clear Enable Bit 140" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB139 ,Set/Clear Enable Bit 139" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB138 ,Set/Clear Enable Bit 138" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB137 ,Set/Clear Enable Bit 137" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB136 ,Set/Clear Enable Bit 136" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB135 ,Set/Clear Enable Bit 135" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB134 ,Set/Clear Enable Bit 134" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB133 ,Set/Clear Enable Bit 133" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB132 ,Set/Clear Enable Bit 132" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB131 ,Set/Clear Enable Bit 131" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB130 ,Set/Clear Enable Bit 130" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB129 ,Set/Clear Enable Bit 129" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB128 ,Set/Clear Enable Bit 128" "Disabled,Enabled" else rgroup.long 0x0110++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) group.long 0x0114++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB191 ,Set/Clear Enable Bit 191" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB190 ,Set/Clear Enable Bit 190" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB189 ,Set/Clear Enable Bit 189" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB188 ,Set/Clear Enable Bit 188" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB187 ,Set/Clear Enable Bit 187" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB186 ,Set/Clear Enable Bit 186" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB185 ,Set/Clear Enable Bit 185" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB184 ,Set/Clear Enable Bit 184" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB183 ,Set/Clear Enable Bit 183" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB182 ,Set/Clear Enable Bit 182" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB181 ,Set/Clear Enable Bit 181" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB180 ,Set/Clear Enable Bit 180" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB179 ,Set/Clear Enable Bit 179" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB178 ,Set/Clear Enable Bit 178" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB177 ,Set/Clear Enable Bit 177" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB176 ,Set/Clear Enable Bit 176" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB175 ,Set/Clear Enable Bit 175" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB174 ,Set/Clear Enable Bit 174" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB173 ,Set/Clear Enable Bit 173" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB172 ,Set/Clear Enable Bit 172" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB171 ,Set/Clear Enable Bit 171" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB170 ,Set/Clear Enable Bit 170" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB169 ,Set/Clear Enable Bit 169" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB168 ,Set/Clear Enable Bit 168" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB167 ,Set/Clear Enable Bit 167" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB166 ,Set/Clear Enable Bit 166" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB165 ,Set/Clear Enable Bit 165" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB164 ,Set/Clear Enable Bit 164" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB163 ,Set/Clear Enable Bit 163" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB162 ,Set/Clear Enable Bit 162" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB161 ,Set/Clear Enable Bit 161" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB160 ,Set/Clear Enable Bit 160" "Disabled,Enabled" else rgroup.long 0x0114++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) group.long 0x0118++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB223 ,Set/Clear Enable Bit 223" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB222 ,Set/Clear Enable Bit 222" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB221 ,Set/Clear Enable Bit 221" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB220 ,Set/Clear Enable Bit 220" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB219 ,Set/Clear Enable Bit 219" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB218 ,Set/Clear Enable Bit 218" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB217 ,Set/Clear Enable Bit 217" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB216 ,Set/Clear Enable Bit 216" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB215 ,Set/Clear Enable Bit 215" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB214 ,Set/Clear Enable Bit 214" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB213 ,Set/Clear Enable Bit 213" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB212 ,Set/Clear Enable Bit 212" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB211 ,Set/Clear Enable Bit 211" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB210 ,Set/Clear Enable Bit 210" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB209 ,Set/Clear Enable Bit 209" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB208 ,Set/Clear Enable Bit 208" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB207 ,Set/Clear Enable Bit 207" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB206 ,Set/Clear Enable Bit 206" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB205 ,Set/Clear Enable Bit 205" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB204 ,Set/Clear Enable Bit 204" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB203 ,Set/Clear Enable Bit 203" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB202 ,Set/Clear Enable Bit 202" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB201 ,Set/Clear Enable Bit 201" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB200 ,Set/Clear Enable Bit 200" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB199 ,Set/Clear Enable Bit 199" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB198 ,Set/Clear Enable Bit 198" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB197 ,Set/Clear Enable Bit 197" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB196 ,Set/Clear Enable Bit 196" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB195 ,Set/Clear Enable Bit 195" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB194 ,Set/Clear Enable Bit 194" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB193 ,Set/Clear Enable Bit 193" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB192 ,Set/Clear Enable Bit 192" "Disabled,Enabled" else rgroup.long 0x0118++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) group.long 0x011C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB255 ,Set/Clear Enable Bit 255" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB254 ,Set/Clear Enable Bit 254" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB253 ,Set/Clear Enable Bit 253" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB252 ,Set/Clear Enable Bit 252" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB251 ,Set/Clear Enable Bit 251" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB250 ,Set/Clear Enable Bit 250" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB249 ,Set/Clear Enable Bit 249" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB248 ,Set/Clear Enable Bit 248" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB247 ,Set/Clear Enable Bit 247" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB246 ,Set/Clear Enable Bit 246" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB245 ,Set/Clear Enable Bit 245" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB244 ,Set/Clear Enable Bit 244" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB243 ,Set/Clear Enable Bit 243" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB242 ,Set/Clear Enable Bit 242" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB241 ,Set/Clear Enable Bit 241" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB240 ,Set/Clear Enable Bit 240" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB239 ,Set/Clear Enable Bit 239" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB238 ,Set/Clear Enable Bit 238" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB237 ,Set/Clear Enable Bit 237" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB236 ,Set/Clear Enable Bit 236" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB235 ,Set/Clear Enable Bit 235" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB234 ,Set/Clear Enable Bit 234" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB233 ,Set/Clear Enable Bit 233" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB232 ,Set/Clear Enable Bit 232" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB231 ,Set/Clear Enable Bit 231" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB230 ,Set/Clear Enable Bit 230" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB229 ,Set/Clear Enable Bit 229" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB228 ,Set/Clear Enable Bit 228" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB227 ,Set/Clear Enable Bit 227" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB226 ,Set/Clear Enable Bit 226" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB225 ,Set/Clear Enable Bit 225" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB224 ,Set/Clear Enable Bit 224" "Disabled,Enabled" else rgroup.long 0x011C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) group.long 0x0120++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB287 ,Set/Clear Enable Bit 287" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB286 ,Set/Clear Enable Bit 286" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB285 ,Set/Clear Enable Bit 285" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB284 ,Set/Clear Enable Bit 284" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB283 ,Set/Clear Enable Bit 283" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB282 ,Set/Clear Enable Bit 282" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB281 ,Set/Clear Enable Bit 281" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB280 ,Set/Clear Enable Bit 280" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB279 ,Set/Clear Enable Bit 279" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB278 ,Set/Clear Enable Bit 278" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB277 ,Set/Clear Enable Bit 277" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB276 ,Set/Clear Enable Bit 276" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB275 ,Set/Clear Enable Bit 275" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB274 ,Set/Clear Enable Bit 274" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB273 ,Set/Clear Enable Bit 273" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB272 ,Set/Clear Enable Bit 272" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB271 ,Set/Clear Enable Bit 271" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB270 ,Set/Clear Enable Bit 270" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB269 ,Set/Clear Enable Bit 269" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB268 ,Set/Clear Enable Bit 268" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB267 ,Set/Clear Enable Bit 267" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB266 ,Set/Clear Enable Bit 266" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB265 ,Set/Clear Enable Bit 265" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB264 ,Set/Clear Enable Bit 264" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB263 ,Set/Clear Enable Bit 263" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB262 ,Set/Clear Enable Bit 262" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB261 ,Set/Clear Enable Bit 261" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB260 ,Set/Clear Enable Bit 260" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB259 ,Set/Clear Enable Bit 259" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB258 ,Set/Clear Enable Bit 258" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB257 ,Set/Clear Enable Bit 257" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB256 ,Set/Clear Enable Bit 256" "Disabled,Enabled" else rgroup.long 0x0120++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) group.long 0x0124++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB319 ,Set/Clear Enable Bit 319" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB318 ,Set/Clear Enable Bit 318" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB317 ,Set/Clear Enable Bit 317" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB316 ,Set/Clear Enable Bit 316" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB315 ,Set/Clear Enable Bit 315" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB314 ,Set/Clear Enable Bit 314" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB313 ,Set/Clear Enable Bit 313" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB312 ,Set/Clear Enable Bit 312" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB311 ,Set/Clear Enable Bit 311" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB310 ,Set/Clear Enable Bit 310" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB309 ,Set/Clear Enable Bit 309" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB308 ,Set/Clear Enable Bit 308" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB307 ,Set/Clear Enable Bit 307" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB306 ,Set/Clear Enable Bit 306" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB305 ,Set/Clear Enable Bit 305" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB304 ,Set/Clear Enable Bit 304" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB303 ,Set/Clear Enable Bit 303" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB302 ,Set/Clear Enable Bit 302" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB301 ,Set/Clear Enable Bit 301" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB300 ,Set/Clear Enable Bit 300" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB299 ,Set/Clear Enable Bit 299" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB298 ,Set/Clear Enable Bit 298" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB297 ,Set/Clear Enable Bit 297" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB296 ,Set/Clear Enable Bit 296" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB295 ,Set/Clear Enable Bit 295" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB294 ,Set/Clear Enable Bit 294" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB293 ,Set/Clear Enable Bit 293" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB292 ,Set/Clear Enable Bit 292" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB291 ,Set/Clear Enable Bit 291" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB290 ,Set/Clear Enable Bit 290" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB289 ,Set/Clear Enable Bit 289" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB288 ,Set/Clear Enable Bit 288" "Disabled,Enabled" else rgroup.long 0x0124++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) group.long 0x0128++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB351 ,Set/Clear Enable Bit 351" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB350 ,Set/Clear Enable Bit 350" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB349 ,Set/Clear Enable Bit 349" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB348 ,Set/Clear Enable Bit 348" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB347 ,Set/Clear Enable Bit 347" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB346 ,Set/Clear Enable Bit 346" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB345 ,Set/Clear Enable Bit 345" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB344 ,Set/Clear Enable Bit 344" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB343 ,Set/Clear Enable Bit 343" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB342 ,Set/Clear Enable Bit 342" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB341 ,Set/Clear Enable Bit 341" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB340 ,Set/Clear Enable Bit 340" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB339 ,Set/Clear Enable Bit 339" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB338 ,Set/Clear Enable Bit 338" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB337 ,Set/Clear Enable Bit 337" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB336 ,Set/Clear Enable Bit 336" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB335 ,Set/Clear Enable Bit 335" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB334 ,Set/Clear Enable Bit 334" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB333 ,Set/Clear Enable Bit 333" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB332 ,Set/Clear Enable Bit 332" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB331 ,Set/Clear Enable Bit 331" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB330 ,Set/Clear Enable Bit 330" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB329 ,Set/Clear Enable Bit 329" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB328 ,Set/Clear Enable Bit 328" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB327 ,Set/Clear Enable Bit 327" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB326 ,Set/Clear Enable Bit 326" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB325 ,Set/Clear Enable Bit 325" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB324 ,Set/Clear Enable Bit 324" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB323 ,Set/Clear Enable Bit 323" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB322 ,Set/Clear Enable Bit 322" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB321 ,Set/Clear Enable Bit 321" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB320 ,Set/Clear Enable Bit 320" "Disabled,Enabled" else rgroup.long 0x0128++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) group.long 0x012C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB383 ,Set/Clear Enable Bit 383" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB382 ,Set/Clear Enable Bit 382" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB381 ,Set/Clear Enable Bit 381" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB380 ,Set/Clear Enable Bit 380" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB379 ,Set/Clear Enable Bit 379" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB378 ,Set/Clear Enable Bit 378" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB377 ,Set/Clear Enable Bit 377" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB376 ,Set/Clear Enable Bit 376" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB375 ,Set/Clear Enable Bit 375" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB374 ,Set/Clear Enable Bit 374" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB373 ,Set/Clear Enable Bit 373" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB372 ,Set/Clear Enable Bit 372" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB371 ,Set/Clear Enable Bit 371" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB370 ,Set/Clear Enable Bit 370" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB369 ,Set/Clear Enable Bit 369" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB368 ,Set/Clear Enable Bit 368" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB367 ,Set/Clear Enable Bit 367" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB366 ,Set/Clear Enable Bit 366" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB365 ,Set/Clear Enable Bit 365" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB364 ,Set/Clear Enable Bit 364" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB363 ,Set/Clear Enable Bit 363" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB362 ,Set/Clear Enable Bit 362" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB361 ,Set/Clear Enable Bit 361" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB360 ,Set/Clear Enable Bit 360" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB359 ,Set/Clear Enable Bit 359" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB358 ,Set/Clear Enable Bit 358" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB357 ,Set/Clear Enable Bit 357" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB356 ,Set/Clear Enable Bit 356" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB355 ,Set/Clear Enable Bit 355" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB354 ,Set/Clear Enable Bit 354" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB353 ,Set/Clear Enable Bit 353" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB352 ,Set/Clear Enable Bit 352" "Disabled,Enabled" else rgroup.long 0x012C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) group.long 0x0130++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB415 ,Set/Clear Enable Bit 415" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB414 ,Set/Clear Enable Bit 414" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB413 ,Set/Clear Enable Bit 413" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB412 ,Set/Clear Enable Bit 412" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB411 ,Set/Clear Enable Bit 411" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB410 ,Set/Clear Enable Bit 410" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB409 ,Set/Clear Enable Bit 409" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB408 ,Set/Clear Enable Bit 408" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB407 ,Set/Clear Enable Bit 407" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB406 ,Set/Clear Enable Bit 406" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB405 ,Set/Clear Enable Bit 405" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB404 ,Set/Clear Enable Bit 404" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB403 ,Set/Clear Enable Bit 403" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB402 ,Set/Clear Enable Bit 402" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB401 ,Set/Clear Enable Bit 401" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB400 ,Set/Clear Enable Bit 400" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB399 ,Set/Clear Enable Bit 399" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB398 ,Set/Clear Enable Bit 398" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB397 ,Set/Clear Enable Bit 397" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB396 ,Set/Clear Enable Bit 396" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB395 ,Set/Clear Enable Bit 395" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB394 ,Set/Clear Enable Bit 394" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB393 ,Set/Clear Enable Bit 393" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB392 ,Set/Clear Enable Bit 392" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB391 ,Set/Clear Enable Bit 391" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB390 ,Set/Clear Enable Bit 390" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB389 ,Set/Clear Enable Bit 389" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB388 ,Set/Clear Enable Bit 388" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB387 ,Set/Clear Enable Bit 387" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB386 ,Set/Clear Enable Bit 386" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB385 ,Set/Clear Enable Bit 385" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB384 ,Set/Clear Enable Bit 384" "Disabled,Enabled" else rgroup.long 0x0130++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) group.long 0x0134++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB447 ,Set/Clear Enable Bit 447" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB446 ,Set/Clear Enable Bit 446" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB445 ,Set/Clear Enable Bit 445" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB444 ,Set/Clear Enable Bit 444" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB443 ,Set/Clear Enable Bit 443" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB442 ,Set/Clear Enable Bit 442" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB441 ,Set/Clear Enable Bit 441" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB440 ,Set/Clear Enable Bit 440" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB439 ,Set/Clear Enable Bit 439" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB438 ,Set/Clear Enable Bit 438" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB437 ,Set/Clear Enable Bit 437" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB436 ,Set/Clear Enable Bit 436" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB435 ,Set/Clear Enable Bit 435" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB434 ,Set/Clear Enable Bit 434" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB433 ,Set/Clear Enable Bit 433" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB432 ,Set/Clear Enable Bit 432" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB431 ,Set/Clear Enable Bit 431" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB430 ,Set/Clear Enable Bit 430" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB429 ,Set/Clear Enable Bit 429" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB428 ,Set/Clear Enable Bit 428" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB427 ,Set/Clear Enable Bit 427" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB426 ,Set/Clear Enable Bit 426" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB425 ,Set/Clear Enable Bit 425" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB424 ,Set/Clear Enable Bit 424" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB423 ,Set/Clear Enable Bit 423" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB422 ,Set/Clear Enable Bit 422" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB421 ,Set/Clear Enable Bit 421" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB420 ,Set/Clear Enable Bit 420" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB419 ,Set/Clear Enable Bit 419" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB418 ,Set/Clear Enable Bit 418" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB417 ,Set/Clear Enable Bit 417" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB416 ,Set/Clear Enable Bit 416" "Disabled,Enabled" else rgroup.long 0x0134++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) group.long 0x0138++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB479 ,Set/Clear Enable Bit 479" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB478 ,Set/Clear Enable Bit 478" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB477 ,Set/Clear Enable Bit 477" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB476 ,Set/Clear Enable Bit 476" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB475 ,Set/Clear Enable Bit 475" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB474 ,Set/Clear Enable Bit 474" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB473 ,Set/Clear Enable Bit 473" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB472 ,Set/Clear Enable Bit 472" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB471 ,Set/Clear Enable Bit 471" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB470 ,Set/Clear Enable Bit 470" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB469 ,Set/Clear Enable Bit 469" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB468 ,Set/Clear Enable Bit 468" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB467 ,Set/Clear Enable Bit 467" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB466 ,Set/Clear Enable Bit 466" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB465 ,Set/Clear Enable Bit 465" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB464 ,Set/Clear Enable Bit 464" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB463 ,Set/Clear Enable Bit 463" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB462 ,Set/Clear Enable Bit 462" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB461 ,Set/Clear Enable Bit 461" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB460 ,Set/Clear Enable Bit 460" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB459 ,Set/Clear Enable Bit 459" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB458 ,Set/Clear Enable Bit 458" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB457 ,Set/Clear Enable Bit 457" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB456 ,Set/Clear Enable Bit 456" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB455 ,Set/Clear Enable Bit 455" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB454 ,Set/Clear Enable Bit 454" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB453 ,Set/Clear Enable Bit 453" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB452 ,Set/Clear Enable Bit 452" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB451 ,Set/Clear Enable Bit 451" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB450 ,Set/Clear Enable Bit 450" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB449 ,Set/Clear Enable Bit 449" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB448 ,Set/Clear Enable Bit 448" "Disabled,Enabled" else rgroup.long 0x0138++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) group.long 0x013C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB511 ,Set/Clear Enable Bit 511" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB510 ,Set/Clear Enable Bit 510" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB509 ,Set/Clear Enable Bit 509" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB508 ,Set/Clear Enable Bit 508" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB507 ,Set/Clear Enable Bit 507" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB506 ,Set/Clear Enable Bit 506" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB505 ,Set/Clear Enable Bit 505" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB504 ,Set/Clear Enable Bit 504" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB503 ,Set/Clear Enable Bit 503" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB502 ,Set/Clear Enable Bit 502" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB501 ,Set/Clear Enable Bit 501" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB500 ,Set/Clear Enable Bit 500" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB499 ,Set/Clear Enable Bit 499" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB498 ,Set/Clear Enable Bit 498" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB497 ,Set/Clear Enable Bit 497" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB496 ,Set/Clear Enable Bit 496" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB495 ,Set/Clear Enable Bit 495" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB494 ,Set/Clear Enable Bit 494" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB493 ,Set/Clear Enable Bit 493" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB492 ,Set/Clear Enable Bit 492" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB491 ,Set/Clear Enable Bit 491" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB490 ,Set/Clear Enable Bit 490" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB489 ,Set/Clear Enable Bit 489" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB488 ,Set/Clear Enable Bit 488" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB487 ,Set/Clear Enable Bit 487" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB486 ,Set/Clear Enable Bit 486" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB485 ,Set/Clear Enable Bit 485" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB484 ,Set/Clear Enable Bit 484" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB483 ,Set/Clear Enable Bit 483" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB482 ,Set/Clear Enable Bit 482" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB481 ,Set/Clear Enable Bit 481" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB480 ,Set/Clear Enable Bit 480" "Disabled,Enabled" else rgroup.long 0x013C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) group.long 0x0140++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB543 ,Set/Clear Enable Bit 543" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB542 ,Set/Clear Enable Bit 542" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB541 ,Set/Clear Enable Bit 541" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB540 ,Set/Clear Enable Bit 540" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB539 ,Set/Clear Enable Bit 539" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB538 ,Set/Clear Enable Bit 538" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB537 ,Set/Clear Enable Bit 537" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB536 ,Set/Clear Enable Bit 536" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB535 ,Set/Clear Enable Bit 535" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB534 ,Set/Clear Enable Bit 534" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB533 ,Set/Clear Enable Bit 533" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB532 ,Set/Clear Enable Bit 532" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB531 ,Set/Clear Enable Bit 531" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB530 ,Set/Clear Enable Bit 530" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB529 ,Set/Clear Enable Bit 529" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB528 ,Set/Clear Enable Bit 528" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB527 ,Set/Clear Enable Bit 527" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB526 ,Set/Clear Enable Bit 526" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB525 ,Set/Clear Enable Bit 525" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB524 ,Set/Clear Enable Bit 524" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB523 ,Set/Clear Enable Bit 523" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB522 ,Set/Clear Enable Bit 522" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB521 ,Set/Clear Enable Bit 521" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB520 ,Set/Clear Enable Bit 520" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB519 ,Set/Clear Enable Bit 519" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB518 ,Set/Clear Enable Bit 518" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB517 ,Set/Clear Enable Bit 517" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB516 ,Set/Clear Enable Bit 516" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB515 ,Set/Clear Enable Bit 515" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB514 ,Set/Clear Enable Bit 514" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB513 ,Set/Clear Enable Bit 513" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB512 ,Set/Clear Enable Bit 512" "Disabled,Enabled" else rgroup.long 0x0140++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) group.long 0x0144++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB575 ,Set/Clear Enable Bit 575" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB574 ,Set/Clear Enable Bit 574" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB573 ,Set/Clear Enable Bit 573" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB572 ,Set/Clear Enable Bit 572" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB571 ,Set/Clear Enable Bit 571" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB570 ,Set/Clear Enable Bit 570" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB569 ,Set/Clear Enable Bit 569" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB568 ,Set/Clear Enable Bit 568" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB567 ,Set/Clear Enable Bit 567" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB566 ,Set/Clear Enable Bit 566" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB565 ,Set/Clear Enable Bit 565" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB564 ,Set/Clear Enable Bit 564" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB563 ,Set/Clear Enable Bit 563" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB562 ,Set/Clear Enable Bit 562" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB561 ,Set/Clear Enable Bit 561" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB560 ,Set/Clear Enable Bit 560" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB559 ,Set/Clear Enable Bit 559" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB558 ,Set/Clear Enable Bit 558" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB557 ,Set/Clear Enable Bit 557" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB556 ,Set/Clear Enable Bit 556" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB555 ,Set/Clear Enable Bit 555" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB554 ,Set/Clear Enable Bit 554" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB553 ,Set/Clear Enable Bit 553" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB552 ,Set/Clear Enable Bit 552" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB551 ,Set/Clear Enable Bit 551" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB550 ,Set/Clear Enable Bit 550" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB549 ,Set/Clear Enable Bit 549" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB548 ,Set/Clear Enable Bit 548" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB547 ,Set/Clear Enable Bit 547" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB546 ,Set/Clear Enable Bit 546" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB545 ,Set/Clear Enable Bit 545" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB544 ,Set/Clear Enable Bit 544" "Disabled,Enabled" else rgroup.long 0x0144++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) group.long 0x0148++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB607 ,Set/Clear Enable Bit 607" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB606 ,Set/Clear Enable Bit 606" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB605 ,Set/Clear Enable Bit 605" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB604 ,Set/Clear Enable Bit 604" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB603 ,Set/Clear Enable Bit 603" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB602 ,Set/Clear Enable Bit 602" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB601 ,Set/Clear Enable Bit 601" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB600 ,Set/Clear Enable Bit 600" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB599 ,Set/Clear Enable Bit 599" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB598 ,Set/Clear Enable Bit 598" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB597 ,Set/Clear Enable Bit 597" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB596 ,Set/Clear Enable Bit 596" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB595 ,Set/Clear Enable Bit 595" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB594 ,Set/Clear Enable Bit 594" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB593 ,Set/Clear Enable Bit 593" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB592 ,Set/Clear Enable Bit 592" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB591 ,Set/Clear Enable Bit 591" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB590 ,Set/Clear Enable Bit 590" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB589 ,Set/Clear Enable Bit 589" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB588 ,Set/Clear Enable Bit 588" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB587 ,Set/Clear Enable Bit 587" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB586 ,Set/Clear Enable Bit 586" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB585 ,Set/Clear Enable Bit 585" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB584 ,Set/Clear Enable Bit 584" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB583 ,Set/Clear Enable Bit 583" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB582 ,Set/Clear Enable Bit 582" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB581 ,Set/Clear Enable Bit 581" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB580 ,Set/Clear Enable Bit 580" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB579 ,Set/Clear Enable Bit 579" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB578 ,Set/Clear Enable Bit 578" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB577 ,Set/Clear Enable Bit 577" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB576 ,Set/Clear Enable Bit 576" "Disabled,Enabled" else rgroup.long 0x0148++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) group.long 0x014C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB639 ,Set/Clear Enable Bit 639" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB638 ,Set/Clear Enable Bit 638" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB637 ,Set/Clear Enable Bit 637" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB636 ,Set/Clear Enable Bit 636" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB635 ,Set/Clear Enable Bit 635" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB634 ,Set/Clear Enable Bit 634" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB633 ,Set/Clear Enable Bit 633" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB632 ,Set/Clear Enable Bit 632" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB631 ,Set/Clear Enable Bit 631" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB630 ,Set/Clear Enable Bit 630" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB629 ,Set/Clear Enable Bit 629" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB628 ,Set/Clear Enable Bit 628" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB627 ,Set/Clear Enable Bit 627" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB626 ,Set/Clear Enable Bit 626" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB625 ,Set/Clear Enable Bit 625" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB624 ,Set/Clear Enable Bit 624" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB623 ,Set/Clear Enable Bit 623" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB622 ,Set/Clear Enable Bit 622" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB621 ,Set/Clear Enable Bit 621" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB620 ,Set/Clear Enable Bit 620" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB619 ,Set/Clear Enable Bit 619" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB618 ,Set/Clear Enable Bit 618" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB617 ,Set/Clear Enable Bit 617" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB616 ,Set/Clear Enable Bit 616" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB615 ,Set/Clear Enable Bit 615" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB614 ,Set/Clear Enable Bit 614" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB613 ,Set/Clear Enable Bit 613" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB612 ,Set/Clear Enable Bit 612" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB611 ,Set/Clear Enable Bit 611" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB610 ,Set/Clear Enable Bit 610" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB609 ,Set/Clear Enable Bit 609" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB608 ,Set/Clear Enable Bit 608" "Disabled,Enabled" else rgroup.long 0x014C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) group.long 0x0150++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB671 ,Set/Clear Enable Bit 671" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB670 ,Set/Clear Enable Bit 670" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB669 ,Set/Clear Enable Bit 669" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB668 ,Set/Clear Enable Bit 668" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB667 ,Set/Clear Enable Bit 667" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB666 ,Set/Clear Enable Bit 666" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB665 ,Set/Clear Enable Bit 665" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB664 ,Set/Clear Enable Bit 664" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB663 ,Set/Clear Enable Bit 663" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB662 ,Set/Clear Enable Bit 662" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB661 ,Set/Clear Enable Bit 661" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB660 ,Set/Clear Enable Bit 660" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB659 ,Set/Clear Enable Bit 659" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB658 ,Set/Clear Enable Bit 658" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB657 ,Set/Clear Enable Bit 657" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB656 ,Set/Clear Enable Bit 656" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB655 ,Set/Clear Enable Bit 655" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB654 ,Set/Clear Enable Bit 654" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB653 ,Set/Clear Enable Bit 653" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB652 ,Set/Clear Enable Bit 652" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB651 ,Set/Clear Enable Bit 651" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB650 ,Set/Clear Enable Bit 650" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB649 ,Set/Clear Enable Bit 649" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB648 ,Set/Clear Enable Bit 648" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB647 ,Set/Clear Enable Bit 647" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB646 ,Set/Clear Enable Bit 646" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB645 ,Set/Clear Enable Bit 645" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB644 ,Set/Clear Enable Bit 644" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB643 ,Set/Clear Enable Bit 643" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB642 ,Set/Clear Enable Bit 642" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB641 ,Set/Clear Enable Bit 641" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB640 ,Set/Clear Enable Bit 640" "Disabled,Enabled" else rgroup.long 0x0150++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) group.long 0x0154++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB703 ,Set/Clear Enable Bit 703" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB702 ,Set/Clear Enable Bit 702" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB701 ,Set/Clear Enable Bit 701" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB700 ,Set/Clear Enable Bit 700" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB699 ,Set/Clear Enable Bit 699" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB698 ,Set/Clear Enable Bit 698" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB697 ,Set/Clear Enable Bit 697" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB696 ,Set/Clear Enable Bit 696" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB695 ,Set/Clear Enable Bit 695" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB694 ,Set/Clear Enable Bit 694" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB693 ,Set/Clear Enable Bit 693" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB692 ,Set/Clear Enable Bit 692" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB691 ,Set/Clear Enable Bit 691" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB690 ,Set/Clear Enable Bit 690" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB689 ,Set/Clear Enable Bit 689" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB688 ,Set/Clear Enable Bit 688" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB687 ,Set/Clear Enable Bit 687" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB686 ,Set/Clear Enable Bit 686" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB685 ,Set/Clear Enable Bit 685" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB684 ,Set/Clear Enable Bit 684" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB683 ,Set/Clear Enable Bit 683" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB682 ,Set/Clear Enable Bit 682" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB681 ,Set/Clear Enable Bit 681" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB680 ,Set/Clear Enable Bit 680" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB679 ,Set/Clear Enable Bit 679" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB678 ,Set/Clear Enable Bit 678" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB677 ,Set/Clear Enable Bit 677" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB676 ,Set/Clear Enable Bit 676" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB675 ,Set/Clear Enable Bit 675" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB674 ,Set/Clear Enable Bit 674" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB673 ,Set/Clear Enable Bit 673" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB672 ,Set/Clear Enable Bit 672" "Disabled,Enabled" else rgroup.long 0x0154++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) group.long 0x0158++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB735 ,Set/Clear Enable Bit 735" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB734 ,Set/Clear Enable Bit 734" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB733 ,Set/Clear Enable Bit 733" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB732 ,Set/Clear Enable Bit 732" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB731 ,Set/Clear Enable Bit 731" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB730 ,Set/Clear Enable Bit 730" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB729 ,Set/Clear Enable Bit 729" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB728 ,Set/Clear Enable Bit 728" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB727 ,Set/Clear Enable Bit 727" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB726 ,Set/Clear Enable Bit 726" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB725 ,Set/Clear Enable Bit 725" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB724 ,Set/Clear Enable Bit 724" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB723 ,Set/Clear Enable Bit 723" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB722 ,Set/Clear Enable Bit 722" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB721 ,Set/Clear Enable Bit 721" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB720 ,Set/Clear Enable Bit 720" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB719 ,Set/Clear Enable Bit 719" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB718 ,Set/Clear Enable Bit 718" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB717 ,Set/Clear Enable Bit 717" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB716 ,Set/Clear Enable Bit 716" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB715 ,Set/Clear Enable Bit 715" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB714 ,Set/Clear Enable Bit 714" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB713 ,Set/Clear Enable Bit 713" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB712 ,Set/Clear Enable Bit 712" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB711 ,Set/Clear Enable Bit 711" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB710 ,Set/Clear Enable Bit 710" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB709 ,Set/Clear Enable Bit 709" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB708 ,Set/Clear Enable Bit 708" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB707 ,Set/Clear Enable Bit 707" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB706 ,Set/Clear Enable Bit 706" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB705 ,Set/Clear Enable Bit 705" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB704 ,Set/Clear Enable Bit 704" "Disabled,Enabled" else rgroup.long 0x0158++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) group.long 0x015C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB767 ,Set/Clear Enable Bit 767" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB766 ,Set/Clear Enable Bit 766" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB765 ,Set/Clear Enable Bit 765" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB764 ,Set/Clear Enable Bit 764" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB763 ,Set/Clear Enable Bit 763" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB762 ,Set/Clear Enable Bit 762" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB761 ,Set/Clear Enable Bit 761" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB760 ,Set/Clear Enable Bit 760" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB759 ,Set/Clear Enable Bit 759" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB758 ,Set/Clear Enable Bit 758" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB757 ,Set/Clear Enable Bit 757" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB756 ,Set/Clear Enable Bit 756" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB755 ,Set/Clear Enable Bit 755" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB754 ,Set/Clear Enable Bit 754" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB753 ,Set/Clear Enable Bit 753" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB752 ,Set/Clear Enable Bit 752" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB751 ,Set/Clear Enable Bit 751" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB750 ,Set/Clear Enable Bit 750" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB749 ,Set/Clear Enable Bit 749" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB748 ,Set/Clear Enable Bit 748" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB747 ,Set/Clear Enable Bit 747" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB746 ,Set/Clear Enable Bit 746" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB745 ,Set/Clear Enable Bit 745" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB744 ,Set/Clear Enable Bit 744" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB743 ,Set/Clear Enable Bit 743" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB742 ,Set/Clear Enable Bit 742" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB741 ,Set/Clear Enable Bit 741" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB740 ,Set/Clear Enable Bit 740" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB739 ,Set/Clear Enable Bit 739" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB738 ,Set/Clear Enable Bit 738" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB737 ,Set/Clear Enable Bit 737" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB736 ,Set/Clear Enable Bit 736" "Disabled,Enabled" else rgroup.long 0x015C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) group.long 0x0160++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB799 ,Set/Clear Enable Bit 799" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB798 ,Set/Clear Enable Bit 798" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB797 ,Set/Clear Enable Bit 797" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB796 ,Set/Clear Enable Bit 796" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB795 ,Set/Clear Enable Bit 795" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB794 ,Set/Clear Enable Bit 794" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB793 ,Set/Clear Enable Bit 793" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB792 ,Set/Clear Enable Bit 792" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB791 ,Set/Clear Enable Bit 791" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB790 ,Set/Clear Enable Bit 790" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB789 ,Set/Clear Enable Bit 789" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB788 ,Set/Clear Enable Bit 788" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB787 ,Set/Clear Enable Bit 787" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB786 ,Set/Clear Enable Bit 786" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB785 ,Set/Clear Enable Bit 785" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB784 ,Set/Clear Enable Bit 784" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB783 ,Set/Clear Enable Bit 783" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB782 ,Set/Clear Enable Bit 782" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB781 ,Set/Clear Enable Bit 781" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB780 ,Set/Clear Enable Bit 780" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB779 ,Set/Clear Enable Bit 779" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB778 ,Set/Clear Enable Bit 778" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB777 ,Set/Clear Enable Bit 777" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB776 ,Set/Clear Enable Bit 776" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB775 ,Set/Clear Enable Bit 775" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB774 ,Set/Clear Enable Bit 774" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB773 ,Set/Clear Enable Bit 773" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB772 ,Set/Clear Enable Bit 772" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB771 ,Set/Clear Enable Bit 771" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB770 ,Set/Clear Enable Bit 770" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB769 ,Set/Clear Enable Bit 769" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB768 ,Set/Clear Enable Bit 768" "Disabled,Enabled" else rgroup.long 0x0160++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) group.long 0x0164++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB831 ,Set/Clear Enable Bit 831" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB830 ,Set/Clear Enable Bit 830" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB829 ,Set/Clear Enable Bit 829" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB828 ,Set/Clear Enable Bit 828" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB827 ,Set/Clear Enable Bit 827" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB826 ,Set/Clear Enable Bit 826" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB825 ,Set/Clear Enable Bit 825" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB824 ,Set/Clear Enable Bit 824" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB823 ,Set/Clear Enable Bit 823" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB822 ,Set/Clear Enable Bit 822" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB821 ,Set/Clear Enable Bit 821" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB820 ,Set/Clear Enable Bit 820" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB819 ,Set/Clear Enable Bit 819" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB818 ,Set/Clear Enable Bit 818" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB817 ,Set/Clear Enable Bit 817" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB816 ,Set/Clear Enable Bit 816" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB815 ,Set/Clear Enable Bit 815" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB814 ,Set/Clear Enable Bit 814" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB813 ,Set/Clear Enable Bit 813" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB812 ,Set/Clear Enable Bit 812" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB811 ,Set/Clear Enable Bit 811" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB810 ,Set/Clear Enable Bit 810" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB809 ,Set/Clear Enable Bit 809" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB808 ,Set/Clear Enable Bit 808" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB807 ,Set/Clear Enable Bit 807" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB806 ,Set/Clear Enable Bit 806" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB805 ,Set/Clear Enable Bit 805" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB804 ,Set/Clear Enable Bit 804" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB803 ,Set/Clear Enable Bit 803" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB802 ,Set/Clear Enable Bit 802" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB801 ,Set/Clear Enable Bit 801" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB800 ,Set/Clear Enable Bit 800" "Disabled,Enabled" else rgroup.long 0x0164++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) group.long 0x0168++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB863 ,Set/Clear Enable Bit 863" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB862 ,Set/Clear Enable Bit 862" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB861 ,Set/Clear Enable Bit 861" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB860 ,Set/Clear Enable Bit 860" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB859 ,Set/Clear Enable Bit 859" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB858 ,Set/Clear Enable Bit 858" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB857 ,Set/Clear Enable Bit 857" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB856 ,Set/Clear Enable Bit 856" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB855 ,Set/Clear Enable Bit 855" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB854 ,Set/Clear Enable Bit 854" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB853 ,Set/Clear Enable Bit 853" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB852 ,Set/Clear Enable Bit 852" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB851 ,Set/Clear Enable Bit 851" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB850 ,Set/Clear Enable Bit 850" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB849 ,Set/Clear Enable Bit 849" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB848 ,Set/Clear Enable Bit 848" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB847 ,Set/Clear Enable Bit 847" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB846 ,Set/Clear Enable Bit 846" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB845 ,Set/Clear Enable Bit 845" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB844 ,Set/Clear Enable Bit 844" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB843 ,Set/Clear Enable Bit 843" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB842 ,Set/Clear Enable Bit 842" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB841 ,Set/Clear Enable Bit 841" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB840 ,Set/Clear Enable Bit 840" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB839 ,Set/Clear Enable Bit 839" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB838 ,Set/Clear Enable Bit 838" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB837 ,Set/Clear Enable Bit 837" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB836 ,Set/Clear Enable Bit 836" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB835 ,Set/Clear Enable Bit 835" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB834 ,Set/Clear Enable Bit 834" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB833 ,Set/Clear Enable Bit 833" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB832 ,Set/Clear Enable Bit 832" "Disabled,Enabled" else rgroup.long 0x0168++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) group.long 0x016C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB895 ,Set/Clear Enable Bit 895" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB894 ,Set/Clear Enable Bit 894" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB893 ,Set/Clear Enable Bit 893" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB892 ,Set/Clear Enable Bit 892" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB891 ,Set/Clear Enable Bit 891" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB890 ,Set/Clear Enable Bit 890" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB889 ,Set/Clear Enable Bit 889" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB888 ,Set/Clear Enable Bit 888" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB887 ,Set/Clear Enable Bit 887" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB886 ,Set/Clear Enable Bit 886" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB885 ,Set/Clear Enable Bit 885" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB884 ,Set/Clear Enable Bit 884" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB883 ,Set/Clear Enable Bit 883" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB882 ,Set/Clear Enable Bit 882" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB881 ,Set/Clear Enable Bit 881" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB880 ,Set/Clear Enable Bit 880" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB879 ,Set/Clear Enable Bit 879" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB878 ,Set/Clear Enable Bit 878" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB877 ,Set/Clear Enable Bit 877" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB876 ,Set/Clear Enable Bit 876" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB875 ,Set/Clear Enable Bit 875" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB874 ,Set/Clear Enable Bit 874" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB873 ,Set/Clear Enable Bit 873" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB872 ,Set/Clear Enable Bit 872" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB871 ,Set/Clear Enable Bit 871" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB870 ,Set/Clear Enable Bit 870" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB869 ,Set/Clear Enable Bit 869" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB868 ,Set/Clear Enable Bit 868" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB867 ,Set/Clear Enable Bit 867" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB866 ,Set/Clear Enable Bit 866" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB865 ,Set/Clear Enable Bit 865" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB864 ,Set/Clear Enable Bit 864" "Disabled,Enabled" else rgroup.long 0x016C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) group.long 0x0170++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB927 ,Set/Clear Enable Bit 927" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB926 ,Set/Clear Enable Bit 926" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB925 ,Set/Clear Enable Bit 925" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB924 ,Set/Clear Enable Bit 924" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB923 ,Set/Clear Enable Bit 923" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB922 ,Set/Clear Enable Bit 922" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB921 ,Set/Clear Enable Bit 921" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB920 ,Set/Clear Enable Bit 920" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB919 ,Set/Clear Enable Bit 919" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB918 ,Set/Clear Enable Bit 918" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB917 ,Set/Clear Enable Bit 917" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB916 ,Set/Clear Enable Bit 916" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB915 ,Set/Clear Enable Bit 915" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB914 ,Set/Clear Enable Bit 914" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB913 ,Set/Clear Enable Bit 913" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB912 ,Set/Clear Enable Bit 912" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB911 ,Set/Clear Enable Bit 911" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB910 ,Set/Clear Enable Bit 910" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB909 ,Set/Clear Enable Bit 909" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB908 ,Set/Clear Enable Bit 908" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB907 ,Set/Clear Enable Bit 907" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB906 ,Set/Clear Enable Bit 906" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB905 ,Set/Clear Enable Bit 905" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB904 ,Set/Clear Enable Bit 904" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB903 ,Set/Clear Enable Bit 903" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB902 ,Set/Clear Enable Bit 902" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB901 ,Set/Clear Enable Bit 901" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB900 ,Set/Clear Enable Bit 900" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB899 ,Set/Clear Enable Bit 899" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB898 ,Set/Clear Enable Bit 898" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB897 ,Set/Clear Enable Bit 897" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB896 ,Set/Clear Enable Bit 896" "Disabled,Enabled" else rgroup.long 0x0170++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) group.long 0x0174++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB959 ,Set/Clear Enable Bit 959" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB958 ,Set/Clear Enable Bit 958" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB957 ,Set/Clear Enable Bit 957" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB956 ,Set/Clear Enable Bit 956" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB955 ,Set/Clear Enable Bit 955" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB954 ,Set/Clear Enable Bit 954" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB953 ,Set/Clear Enable Bit 953" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB952 ,Set/Clear Enable Bit 952" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB951 ,Set/Clear Enable Bit 951" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB950 ,Set/Clear Enable Bit 950" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB949 ,Set/Clear Enable Bit 949" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB948 ,Set/Clear Enable Bit 948" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB947 ,Set/Clear Enable Bit 947" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB946 ,Set/Clear Enable Bit 946" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB945 ,Set/Clear Enable Bit 945" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB944 ,Set/Clear Enable Bit 944" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB943 ,Set/Clear Enable Bit 943" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB942 ,Set/Clear Enable Bit 942" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB941 ,Set/Clear Enable Bit 941" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB940 ,Set/Clear Enable Bit 940" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB939 ,Set/Clear Enable Bit 939" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB938 ,Set/Clear Enable Bit 938" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB937 ,Set/Clear Enable Bit 937" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB936 ,Set/Clear Enable Bit 936" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB935 ,Set/Clear Enable Bit 935" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB934 ,Set/Clear Enable Bit 934" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB933 ,Set/Clear Enable Bit 933" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB932 ,Set/Clear Enable Bit 932" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB931 ,Set/Clear Enable Bit 931" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB930 ,Set/Clear Enable Bit 930" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB929 ,Set/Clear Enable Bit 929" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB928 ,Set/Clear Enable Bit 928" "Disabled,Enabled" else rgroup.long 0x0174++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) group.long 0x0178++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB991 ,Set/Clear Enable Bit 991" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB990 ,Set/Clear Enable Bit 990" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB989 ,Set/Clear Enable Bit 989" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB988 ,Set/Clear Enable Bit 988" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB987 ,Set/Clear Enable Bit 987" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB986 ,Set/Clear Enable Bit 986" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB985 ,Set/Clear Enable Bit 985" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB984 ,Set/Clear Enable Bit 984" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB983 ,Set/Clear Enable Bit 983" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB982 ,Set/Clear Enable Bit 982" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB981 ,Set/Clear Enable Bit 981" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB980 ,Set/Clear Enable Bit 980" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB979 ,Set/Clear Enable Bit 979" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB978 ,Set/Clear Enable Bit 978" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB977 ,Set/Clear Enable Bit 977" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB976 ,Set/Clear Enable Bit 976" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB975 ,Set/Clear Enable Bit 975" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB974 ,Set/Clear Enable Bit 974" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB973 ,Set/Clear Enable Bit 973" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB972 ,Set/Clear Enable Bit 972" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB971 ,Set/Clear Enable Bit 971" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB970 ,Set/Clear Enable Bit 970" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB969 ,Set/Clear Enable Bit 969" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB968 ,Set/Clear Enable Bit 968" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB967 ,Set/Clear Enable Bit 967" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB966 ,Set/Clear Enable Bit 966" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB965 ,Set/Clear Enable Bit 965" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB964 ,Set/Clear Enable Bit 964" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB963 ,Set/Clear Enable Bit 963" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB962 ,Set/Clear Enable Bit 962" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB961 ,Set/Clear Enable Bit 961" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB960 ,Set/Clear Enable Bit 960" "Disabled,Enabled" else rgroup.long 0x0178++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)==0x1F) group.long 0x017C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB1019 ,Set/Clear Enable Bit 1019" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB1018 ,Set/Clear Enable Bit 1018" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB1017 ,Set/Clear Enable Bit 1017" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB1016 ,Set/Clear Enable Bit 1016" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB1015 ,Set/Clear Enable Bit 1015" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB1014 ,Set/Clear Enable Bit 1014" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB1013 ,Set/Clear Enable Bit 1013" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB1012 ,Set/Clear Enable Bit 1012" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB1011 ,Set/Clear Enable Bit 1011" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB1010 ,Set/Clear Enable Bit 1010" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB1009 ,Set/Clear Enable Bit 1009" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB1008 ,Set/Clear Enable Bit 1008" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB1007 ,Set/Clear Enable Bit 1007" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB1006 ,Set/Clear Enable Bit 1006" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB1005 ,Set/Clear Enable Bit 1005" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB1004 ,Set/Clear Enable Bit 1004" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB1003 ,Set/Clear Enable Bit 1003" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB1002 ,Set/Clear Enable Bit 1002" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB1001 ,Set/Clear Enable Bit 1001" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB1000 ,Set/Clear Enable Bit 1000" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB999 ,Set/Clear Enable Bit 999" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB998 ,Set/Clear Enable Bit 998" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB997 ,Set/Clear Enable Bit 997" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB996 ,Set/Clear Enable Bit 996" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB995 ,Set/Clear Enable Bit 995" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB994 ,Set/Clear Enable Bit 994" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB993 ,Set/Clear Enable Bit 993" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB992 ,Set/Clear Enable Bit 992" "Disabled,Enabled" else rgroup.long 0x017C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 22. tree "Set/Clear Pending Registers" group.long 0x0200++0x03 line.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31 ,Set/Clear Pending Bit 31" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND30 ,Set/Clear Pending Bit 30" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND29 ,Set/Clear Pending Bit 29" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28 ,Set/Clear Pending Bit 28" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND27 ,Set/Clear Pending Bit 27" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND26 ,Set/Clear Pending Bit 26" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25 ,Set/Clear Pending Bit 25" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND24 ,Set/Clear Pending Bit 24" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND23 ,Set/Clear Pending Bit 23" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22 ,Set/Clear Pending Bit 22" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND21 ,Set/Clear Pending Bit 21" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND20 ,Set/Clear Pending Bit 20" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19 ,Set/Clear Pending Bit 19" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND18 ,Set/Clear Pending Bit 18" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND17 ,Set/Clear Pending Bit 17" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16 ,Set/Clear Pending Bit 16" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND15 ,Set/Clear Pending Bit 15" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND14 ,Set/Clear Pending Bit 14" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13 ,Set/Clear Pending Bit 13" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND12 ,Set/Clear Pending Bit 12" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND11 ,Set/Clear Pending Bit 11" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10 ,Set/Clear Pending Bit 10" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND9 ,Set/Clear Pending Bit 9" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND8 ,Set/Clear Pending Bit 8" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7 ,Set/Clear Pending Bit 7" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND6 ,Set/Clear Pending Bit 6" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND5 ,Set/Clear Pending Bit 5" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4 ,Set/Clear Pending Bit 4" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND3 ,Set/Clear Pending Bit 3" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND2 ,Set/Clear Pending Bit 2" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1 ,Set/Clear Pending Bit 1" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND0 ,Set/Clear Pending Bit 0" "Not pending,Pending" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) group.long 0x0204++0x03 line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND63 ,Set/Clear Pending Bit 63" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND62 ,Set/Clear Pending Bit 62" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND61 ,Set/Clear Pending Bit 61" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND60 ,Set/Clear Pending Bit 60" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND59 ,Set/Clear Pending Bit 59" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND58 ,Set/Clear Pending Bit 58" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND57 ,Set/Clear Pending Bit 57" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND56 ,Set/Clear Pending Bit 56" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND55 ,Set/Clear Pending Bit 55" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND54 ,Set/Clear Pending Bit 54" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND53 ,Set/Clear Pending Bit 53" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND52 ,Set/Clear Pending Bit 52" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND51 ,Set/Clear Pending Bit 51" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND50 ,Set/Clear Pending Bit 50" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND49 ,Set/Clear Pending Bit 49" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND48 ,Set/Clear Pending Bit 48" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND47 ,Set/Clear Pending Bit 47" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND46 ,Set/Clear Pending Bit 46" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND45 ,Set/Clear Pending Bit 45" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND44 ,Set/Clear Pending Bit 44" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND43 ,Set/Clear Pending Bit 43" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND42 ,Set/Clear Pending Bit 42" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND41 ,Set/Clear Pending Bit 41" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND40 ,Set/Clear Pending Bit 40" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND39 ,Set/Clear Pending Bit 39" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND38 ,Set/Clear Pending Bit 38" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND37 ,Set/Clear Pending Bit 37" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND36 ,Set/Clear Pending Bit 36" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND35 ,Set/Clear Pending Bit 35" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND34 ,Set/Clear Pending Bit 34" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND33 ,Set/Clear Pending Bit 33" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND32 ,Set/Clear Pending Bit 32" "Not pending,Pending" else rgroup.long 0x0204++0x03 line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) group.long 0x0208++0x03 line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND95 ,Set/Clear Pending Bit 95" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND94 ,Set/Clear Pending Bit 94" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND93 ,Set/Clear Pending Bit 93" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND92 ,Set/Clear Pending Bit 92" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND91 ,Set/Clear Pending Bit 91" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND90 ,Set/Clear Pending Bit 90" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND89 ,Set/Clear Pending Bit 89" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND88 ,Set/Clear Pending Bit 88" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND87 ,Set/Clear Pending Bit 87" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND86 ,Set/Clear Pending Bit 86" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND85 ,Set/Clear Pending Bit 85" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND84 ,Set/Clear Pending Bit 84" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND83 ,Set/Clear Pending Bit 83" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND82 ,Set/Clear Pending Bit 82" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND81 ,Set/Clear Pending Bit 81" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND80 ,Set/Clear Pending Bit 80" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND79 ,Set/Clear Pending Bit 79" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND78 ,Set/Clear Pending Bit 78" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND77 ,Set/Clear Pending Bit 77" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND76 ,Set/Clear Pending Bit 76" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND75 ,Set/Clear Pending Bit 75" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND74 ,Set/Clear Pending Bit 74" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND73 ,Set/Clear Pending Bit 73" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND72 ,Set/Clear Pending Bit 72" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND71 ,Set/Clear Pending Bit 71" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND70 ,Set/Clear Pending Bit 70" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND69 ,Set/Clear Pending Bit 69" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND68 ,Set/Clear Pending Bit 68" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND67 ,Set/Clear Pending Bit 67" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND66 ,Set/Clear Pending Bit 66" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND65 ,Set/Clear Pending Bit 65" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND64 ,Set/Clear Pending Bit 64" "Not pending,Pending" else rgroup.long 0x0208++0x03 line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) group.long 0x020C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND127 ,Set/Clear Pending Bit 127" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND126 ,Set/Clear Pending Bit 126" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND125 ,Set/Clear Pending Bit 125" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND124 ,Set/Clear Pending Bit 124" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND123 ,Set/Clear Pending Bit 123" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND122 ,Set/Clear Pending Bit 122" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND121 ,Set/Clear Pending Bit 121" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND120 ,Set/Clear Pending Bit 120" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND119 ,Set/Clear Pending Bit 119" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND118 ,Set/Clear Pending Bit 118" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND117 ,Set/Clear Pending Bit 117" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND116 ,Set/Clear Pending Bit 116" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND115 ,Set/Clear Pending Bit 115" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND114 ,Set/Clear Pending Bit 114" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND113 ,Set/Clear Pending Bit 113" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND112 ,Set/Clear Pending Bit 112" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND111 ,Set/Clear Pending Bit 111" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND110 ,Set/Clear Pending Bit 110" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND109 ,Set/Clear Pending Bit 109" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND108 ,Set/Clear Pending Bit 108" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND107 ,Set/Clear Pending Bit 107" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND106 ,Set/Clear Pending Bit 106" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND105 ,Set/Clear Pending Bit 105" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND104 ,Set/Clear Pending Bit 104" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND103 ,Set/Clear Pending Bit 103" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND102 ,Set/Clear Pending Bit 102" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND101 ,Set/Clear Pending Bit 101" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND100 ,Set/Clear Pending Bit 100" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND99 ,Set/Clear Pending Bit 99" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND98 ,Set/Clear Pending Bit 98" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND97 ,Set/Clear Pending Bit 97" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND96 ,Set/Clear Pending Bit 96" "Not pending,Pending" else rgroup.long 0x020C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) group.long 0x0210++0x03 line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND159 ,Set/Clear Pending Bit 159" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND158 ,Set/Clear Pending Bit 158" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND157 ,Set/Clear Pending Bit 157" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND156 ,Set/Clear Pending Bit 156" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND155 ,Set/Clear Pending Bit 155" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND154 ,Set/Clear Pending Bit 154" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND153 ,Set/Clear Pending Bit 153" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND152 ,Set/Clear Pending Bit 152" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND151 ,Set/Clear Pending Bit 151" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND150 ,Set/Clear Pending Bit 150" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND149 ,Set/Clear Pending Bit 149" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND148 ,Set/Clear Pending Bit 148" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND147 ,Set/Clear Pending Bit 147" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND146 ,Set/Clear Pending Bit 146" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND145 ,Set/Clear Pending Bit 145" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND144 ,Set/Clear Pending Bit 144" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND143 ,Set/Clear Pending Bit 143" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND142 ,Set/Clear Pending Bit 142" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND141 ,Set/Clear Pending Bit 141" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND140 ,Set/Clear Pending Bit 140" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND139 ,Set/Clear Pending Bit 139" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND138 ,Set/Clear Pending Bit 138" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND137 ,Set/Clear Pending Bit 137" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND136 ,Set/Clear Pending Bit 136" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND135 ,Set/Clear Pending Bit 135" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND134 ,Set/Clear Pending Bit 134" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND133 ,Set/Clear Pending Bit 133" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND132 ,Set/Clear Pending Bit 132" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND131 ,Set/Clear Pending Bit 131" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND130 ,Set/Clear Pending Bit 130" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND129 ,Set/Clear Pending Bit 129" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND128 ,Set/Clear Pending Bit 128" "Not pending,Pending" else rgroup.long 0x0210++0x03 line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) group.long 0x0214++0x03 line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND191 ,Set/Clear Pending Bit 191" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND190 ,Set/Clear Pending Bit 190" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND189 ,Set/Clear Pending Bit 189" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND188 ,Set/Clear Pending Bit 188" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND187 ,Set/Clear Pending Bit 187" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND186 ,Set/Clear Pending Bit 186" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND185 ,Set/Clear Pending Bit 185" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND184 ,Set/Clear Pending Bit 184" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND183 ,Set/Clear Pending Bit 183" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND182 ,Set/Clear Pending Bit 182" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND181 ,Set/Clear Pending Bit 181" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND180 ,Set/Clear Pending Bit 180" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND179 ,Set/Clear Pending Bit 179" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND178 ,Set/Clear Pending Bit 178" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND177 ,Set/Clear Pending Bit 177" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND176 ,Set/Clear Pending Bit 176" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND175 ,Set/Clear Pending Bit 175" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND174 ,Set/Clear Pending Bit 174" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND173 ,Set/Clear Pending Bit 173" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND172 ,Set/Clear Pending Bit 172" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND171 ,Set/Clear Pending Bit 171" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND170 ,Set/Clear Pending Bit 170" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND169 ,Set/Clear Pending Bit 169" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND168 ,Set/Clear Pending Bit 168" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND167 ,Set/Clear Pending Bit 167" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND166 ,Set/Clear Pending Bit 166" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND165 ,Set/Clear Pending Bit 165" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND164 ,Set/Clear Pending Bit 164" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND163 ,Set/Clear Pending Bit 163" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND162 ,Set/Clear Pending Bit 162" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND161 ,Set/Clear Pending Bit 161" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND160 ,Set/Clear Pending Bit 160" "Not pending,Pending" else rgroup.long 0x0214++0x03 line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) group.long 0x0218++0x03 line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND223 ,Set/Clear Pending Bit 223" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND222 ,Set/Clear Pending Bit 222" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND221 ,Set/Clear Pending Bit 221" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND220 ,Set/Clear Pending Bit 220" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND219 ,Set/Clear Pending Bit 219" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND218 ,Set/Clear Pending Bit 218" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND217 ,Set/Clear Pending Bit 217" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND216 ,Set/Clear Pending Bit 216" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND215 ,Set/Clear Pending Bit 215" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND214 ,Set/Clear Pending Bit 214" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND213 ,Set/Clear Pending Bit 213" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND212 ,Set/Clear Pending Bit 212" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND211 ,Set/Clear Pending Bit 211" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND210 ,Set/Clear Pending Bit 210" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND209 ,Set/Clear Pending Bit 209" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND208 ,Set/Clear Pending Bit 208" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND207 ,Set/Clear Pending Bit 207" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND206 ,Set/Clear Pending Bit 206" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND205 ,Set/Clear Pending Bit 205" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND204 ,Set/Clear Pending Bit 204" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND203 ,Set/Clear Pending Bit 203" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND202 ,Set/Clear Pending Bit 202" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND201 ,Set/Clear Pending Bit 201" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND200 ,Set/Clear Pending Bit 200" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND199 ,Set/Clear Pending Bit 199" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND198 ,Set/Clear Pending Bit 198" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND197 ,Set/Clear Pending Bit 197" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND196 ,Set/Clear Pending Bit 196" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND195 ,Set/Clear Pending Bit 195" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND194 ,Set/Clear Pending Bit 194" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND193 ,Set/Clear Pending Bit 193" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND192 ,Set/Clear Pending Bit 192" "Not pending,Pending" else rgroup.long 0x0218++0x03 line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) group.long 0x021C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND255 ,Set/Clear Pending Bit 255" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND254 ,Set/Clear Pending Bit 254" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND253 ,Set/Clear Pending Bit 253" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND252 ,Set/Clear Pending Bit 252" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND251 ,Set/Clear Pending Bit 251" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND250 ,Set/Clear Pending Bit 250" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND249 ,Set/Clear Pending Bit 249" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND248 ,Set/Clear Pending Bit 248" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND247 ,Set/Clear Pending Bit 247" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND246 ,Set/Clear Pending Bit 246" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND245 ,Set/Clear Pending Bit 245" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND244 ,Set/Clear Pending Bit 244" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND243 ,Set/Clear Pending Bit 243" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND242 ,Set/Clear Pending Bit 242" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND241 ,Set/Clear Pending Bit 241" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND240 ,Set/Clear Pending Bit 240" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND239 ,Set/Clear Pending Bit 239" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND238 ,Set/Clear Pending Bit 238" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND237 ,Set/Clear Pending Bit 237" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND236 ,Set/Clear Pending Bit 236" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND235 ,Set/Clear Pending Bit 235" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND234 ,Set/Clear Pending Bit 234" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND233 ,Set/Clear Pending Bit 233" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND232 ,Set/Clear Pending Bit 232" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND231 ,Set/Clear Pending Bit 231" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND230 ,Set/Clear Pending Bit 230" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND229 ,Set/Clear Pending Bit 229" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND228 ,Set/Clear Pending Bit 228" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND227 ,Set/Clear Pending Bit 227" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND226 ,Set/Clear Pending Bit 226" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND225 ,Set/Clear Pending Bit 225" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND224 ,Set/Clear Pending Bit 224" "Not pending,Pending" else rgroup.long 0x021C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) group.long 0x0220++0x03 line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND287 ,Set/Clear Pending Bit 287" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND286 ,Set/Clear Pending Bit 286" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND285 ,Set/Clear Pending Bit 285" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND284 ,Set/Clear Pending Bit 284" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND283 ,Set/Clear Pending Bit 283" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND282 ,Set/Clear Pending Bit 282" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND281 ,Set/Clear Pending Bit 281" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND280 ,Set/Clear Pending Bit 280" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND279 ,Set/Clear Pending Bit 279" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND278 ,Set/Clear Pending Bit 278" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND277 ,Set/Clear Pending Bit 277" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND276 ,Set/Clear Pending Bit 276" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND275 ,Set/Clear Pending Bit 275" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND274 ,Set/Clear Pending Bit 274" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND273 ,Set/Clear Pending Bit 273" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND272 ,Set/Clear Pending Bit 272" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND271 ,Set/Clear Pending Bit 271" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND270 ,Set/Clear Pending Bit 270" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND269 ,Set/Clear Pending Bit 269" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND268 ,Set/Clear Pending Bit 268" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND267 ,Set/Clear Pending Bit 267" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND266 ,Set/Clear Pending Bit 266" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND265 ,Set/Clear Pending Bit 265" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND264 ,Set/Clear Pending Bit 264" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND263 ,Set/Clear Pending Bit 263" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND262 ,Set/Clear Pending Bit 262" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND261 ,Set/Clear Pending Bit 261" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND260 ,Set/Clear Pending Bit 260" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND259 ,Set/Clear Pending Bit 259" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND258 ,Set/Clear Pending Bit 258" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND257 ,Set/Clear Pending Bit 257" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND256 ,Set/Clear Pending Bit 256" "Not pending,Pending" else rgroup.long 0x0220++0x03 line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) group.long 0x0224++0x03 line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND319 ,Set/Clear Pending Bit 319" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND318 ,Set/Clear Pending Bit 318" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND317 ,Set/Clear Pending Bit 317" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND316 ,Set/Clear Pending Bit 316" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND315 ,Set/Clear Pending Bit 315" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND314 ,Set/Clear Pending Bit 314" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND313 ,Set/Clear Pending Bit 313" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND312 ,Set/Clear Pending Bit 312" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND311 ,Set/Clear Pending Bit 311" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND310 ,Set/Clear Pending Bit 310" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND309 ,Set/Clear Pending Bit 309" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND308 ,Set/Clear Pending Bit 308" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND307 ,Set/Clear Pending Bit 307" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND306 ,Set/Clear Pending Bit 306" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND305 ,Set/Clear Pending Bit 305" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND304 ,Set/Clear Pending Bit 304" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND303 ,Set/Clear Pending Bit 303" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND302 ,Set/Clear Pending Bit 302" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND301 ,Set/Clear Pending Bit 301" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND300 ,Set/Clear Pending Bit 300" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND299 ,Set/Clear Pending Bit 299" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND298 ,Set/Clear Pending Bit 298" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND297 ,Set/Clear Pending Bit 297" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND296 ,Set/Clear Pending Bit 296" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND295 ,Set/Clear Pending Bit 295" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND294 ,Set/Clear Pending Bit 294" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND293 ,Set/Clear Pending Bit 293" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND292 ,Set/Clear Pending Bit 292" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND291 ,Set/Clear Pending Bit 291" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND290 ,Set/Clear Pending Bit 290" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND289 ,Set/Clear Pending Bit 289" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND288 ,Set/Clear Pending Bit 288" "Not pending,Pending" else rgroup.long 0x0224++0x03 line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) group.long 0x0228++0x03 line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND351 ,Set/Clear Pending Bit 351" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND350 ,Set/Clear Pending Bit 350" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND349 ,Set/Clear Pending Bit 349" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND348 ,Set/Clear Pending Bit 348" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND347 ,Set/Clear Pending Bit 347" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND346 ,Set/Clear Pending Bit 346" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND345 ,Set/Clear Pending Bit 345" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND344 ,Set/Clear Pending Bit 344" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND343 ,Set/Clear Pending Bit 343" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND342 ,Set/Clear Pending Bit 342" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND341 ,Set/Clear Pending Bit 341" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND340 ,Set/Clear Pending Bit 340" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND339 ,Set/Clear Pending Bit 339" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND338 ,Set/Clear Pending Bit 338" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND337 ,Set/Clear Pending Bit 337" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND336 ,Set/Clear Pending Bit 336" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND335 ,Set/Clear Pending Bit 335" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND334 ,Set/Clear Pending Bit 334" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND333 ,Set/Clear Pending Bit 333" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND332 ,Set/Clear Pending Bit 332" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND331 ,Set/Clear Pending Bit 331" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND330 ,Set/Clear Pending Bit 330" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND329 ,Set/Clear Pending Bit 329" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND328 ,Set/Clear Pending Bit 328" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND327 ,Set/Clear Pending Bit 327" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND326 ,Set/Clear Pending Bit 326" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND325 ,Set/Clear Pending Bit 325" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND324 ,Set/Clear Pending Bit 324" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND323 ,Set/Clear Pending Bit 323" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND322 ,Set/Clear Pending Bit 322" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND321 ,Set/Clear Pending Bit 321" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND320 ,Set/Clear Pending Bit 320" "Not pending,Pending" else rgroup.long 0x0228++0x03 line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) group.long 0x022C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND383 ,Set/Clear Pending Bit 383" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND382 ,Set/Clear Pending Bit 382" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND381 ,Set/Clear Pending Bit 381" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND380 ,Set/Clear Pending Bit 380" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND379 ,Set/Clear Pending Bit 379" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND378 ,Set/Clear Pending Bit 378" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND377 ,Set/Clear Pending Bit 377" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND376 ,Set/Clear Pending Bit 376" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND375 ,Set/Clear Pending Bit 375" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND374 ,Set/Clear Pending Bit 374" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND373 ,Set/Clear Pending Bit 373" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND372 ,Set/Clear Pending Bit 372" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND371 ,Set/Clear Pending Bit 371" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND370 ,Set/Clear Pending Bit 370" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND369 ,Set/Clear Pending Bit 369" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND368 ,Set/Clear Pending Bit 368" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND367 ,Set/Clear Pending Bit 367" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND366 ,Set/Clear Pending Bit 366" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND365 ,Set/Clear Pending Bit 365" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND364 ,Set/Clear Pending Bit 364" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND363 ,Set/Clear Pending Bit 363" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND362 ,Set/Clear Pending Bit 362" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND361 ,Set/Clear Pending Bit 361" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND360 ,Set/Clear Pending Bit 360" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND359 ,Set/Clear Pending Bit 359" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND358 ,Set/Clear Pending Bit 358" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND357 ,Set/Clear Pending Bit 357" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND356 ,Set/Clear Pending Bit 356" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND355 ,Set/Clear Pending Bit 355" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND354 ,Set/Clear Pending Bit 354" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND353 ,Set/Clear Pending Bit 353" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND352 ,Set/Clear Pending Bit 352" "Not pending,Pending" else rgroup.long 0x022C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) group.long 0x0230++0x03 line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND415 ,Set/Clear Pending Bit 415" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND414 ,Set/Clear Pending Bit 414" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND413 ,Set/Clear Pending Bit 413" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND412 ,Set/Clear Pending Bit 412" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND411 ,Set/Clear Pending Bit 411" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND410 ,Set/Clear Pending Bit 410" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND409 ,Set/Clear Pending Bit 409" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND408 ,Set/Clear Pending Bit 408" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND407 ,Set/Clear Pending Bit 407" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND406 ,Set/Clear Pending Bit 406" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND405 ,Set/Clear Pending Bit 405" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND404 ,Set/Clear Pending Bit 404" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND403 ,Set/Clear Pending Bit 403" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND402 ,Set/Clear Pending Bit 402" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND401 ,Set/Clear Pending Bit 401" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND400 ,Set/Clear Pending Bit 400" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND399 ,Set/Clear Pending Bit 399" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND398 ,Set/Clear Pending Bit 398" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND397 ,Set/Clear Pending Bit 397" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND396 ,Set/Clear Pending Bit 396" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND395 ,Set/Clear Pending Bit 395" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND394 ,Set/Clear Pending Bit 394" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND393 ,Set/Clear Pending Bit 393" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND392 ,Set/Clear Pending Bit 392" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND391 ,Set/Clear Pending Bit 391" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND390 ,Set/Clear Pending Bit 390" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND389 ,Set/Clear Pending Bit 389" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND388 ,Set/Clear Pending Bit 388" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND387 ,Set/Clear Pending Bit 387" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND386 ,Set/Clear Pending Bit 386" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND385 ,Set/Clear Pending Bit 385" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND384 ,Set/Clear Pending Bit 384" "Not pending,Pending" else rgroup.long 0x0230++0x03 line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) group.long 0x0234++0x03 line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND447 ,Set/Clear Pending Bit 447" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND446 ,Set/Clear Pending Bit 446" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND445 ,Set/Clear Pending Bit 445" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND444 ,Set/Clear Pending Bit 444" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND443 ,Set/Clear Pending Bit 443" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND442 ,Set/Clear Pending Bit 442" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND441 ,Set/Clear Pending Bit 441" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND440 ,Set/Clear Pending Bit 440" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND439 ,Set/Clear Pending Bit 439" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND438 ,Set/Clear Pending Bit 438" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND437 ,Set/Clear Pending Bit 437" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND436 ,Set/Clear Pending Bit 436" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND435 ,Set/Clear Pending Bit 435" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND434 ,Set/Clear Pending Bit 434" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND433 ,Set/Clear Pending Bit 433" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND432 ,Set/Clear Pending Bit 432" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND431 ,Set/Clear Pending Bit 431" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND430 ,Set/Clear Pending Bit 430" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND429 ,Set/Clear Pending Bit 429" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND428 ,Set/Clear Pending Bit 428" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND427 ,Set/Clear Pending Bit 427" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND426 ,Set/Clear Pending Bit 426" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND425 ,Set/Clear Pending Bit 425" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND424 ,Set/Clear Pending Bit 424" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND423 ,Set/Clear Pending Bit 423" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND422 ,Set/Clear Pending Bit 422" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND421 ,Set/Clear Pending Bit 421" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND420 ,Set/Clear Pending Bit 420" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND419 ,Set/Clear Pending Bit 419" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND418 ,Set/Clear Pending Bit 418" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND417 ,Set/Clear Pending Bit 417" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND416 ,Set/Clear Pending Bit 416" "Not pending,Pending" else rgroup.long 0x0234++0x03 line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) group.long 0x0238++0x03 line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND479 ,Set/Clear Pending Bit 479" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND478 ,Set/Clear Pending Bit 478" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND477 ,Set/Clear Pending Bit 477" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND476 ,Set/Clear Pending Bit 476" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND475 ,Set/Clear Pending Bit 475" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND474 ,Set/Clear Pending Bit 474" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND473 ,Set/Clear Pending Bit 473" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND472 ,Set/Clear Pending Bit 472" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND471 ,Set/Clear Pending Bit 471" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND470 ,Set/Clear Pending Bit 470" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND469 ,Set/Clear Pending Bit 469" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND468 ,Set/Clear Pending Bit 468" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND467 ,Set/Clear Pending Bit 467" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND466 ,Set/Clear Pending Bit 466" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND465 ,Set/Clear Pending Bit 465" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND464 ,Set/Clear Pending Bit 464" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND463 ,Set/Clear Pending Bit 463" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND462 ,Set/Clear Pending Bit 462" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND461 ,Set/Clear Pending Bit 461" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND460 ,Set/Clear Pending Bit 460" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND459 ,Set/Clear Pending Bit 459" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND458 ,Set/Clear Pending Bit 458" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND457 ,Set/Clear Pending Bit 457" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND456 ,Set/Clear Pending Bit 456" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND455 ,Set/Clear Pending Bit 455" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND454 ,Set/Clear Pending Bit 454" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND453 ,Set/Clear Pending Bit 453" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND452 ,Set/Clear Pending Bit 452" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND451 ,Set/Clear Pending Bit 451" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND450 ,Set/Clear Pending Bit 450" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND449 ,Set/Clear Pending Bit 449" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND448 ,Set/Clear Pending Bit 448" "Not pending,Pending" else rgroup.long 0x0238++0x03 line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) group.long 0x023C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND511 ,Set/Clear Pending Bit 511" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND510 ,Set/Clear Pending Bit 510" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND509 ,Set/Clear Pending Bit 509" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND508 ,Set/Clear Pending Bit 508" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND507 ,Set/Clear Pending Bit 507" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND506 ,Set/Clear Pending Bit 506" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND505 ,Set/Clear Pending Bit 505" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND504 ,Set/Clear Pending Bit 504" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND503 ,Set/Clear Pending Bit 503" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND502 ,Set/Clear Pending Bit 502" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND501 ,Set/Clear Pending Bit 501" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND500 ,Set/Clear Pending Bit 500" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND499 ,Set/Clear Pending Bit 499" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND498 ,Set/Clear Pending Bit 498" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND497 ,Set/Clear Pending Bit 497" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND496 ,Set/Clear Pending Bit 496" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND495 ,Set/Clear Pending Bit 495" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND494 ,Set/Clear Pending Bit 494" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND493 ,Set/Clear Pending Bit 493" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND492 ,Set/Clear Pending Bit 492" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND491 ,Set/Clear Pending Bit 491" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND490 ,Set/Clear Pending Bit 490" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND489 ,Set/Clear Pending Bit 489" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND488 ,Set/Clear Pending Bit 488" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND487 ,Set/Clear Pending Bit 487" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND486 ,Set/Clear Pending Bit 486" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND485 ,Set/Clear Pending Bit 485" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND484 ,Set/Clear Pending Bit 484" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND483 ,Set/Clear Pending Bit 483" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND482 ,Set/Clear Pending Bit 482" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND481 ,Set/Clear Pending Bit 481" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND480 ,Set/Clear Pending Bit 480" "Not pending,Pending" else rgroup.long 0x023C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) group.long 0x0240++0x03 line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND543 ,Set/Clear Pending Bit 543" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND542 ,Set/Clear Pending Bit 542" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND541 ,Set/Clear Pending Bit 541" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND540 ,Set/Clear Pending Bit 540" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND539 ,Set/Clear Pending Bit 539" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND538 ,Set/Clear Pending Bit 538" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND537 ,Set/Clear Pending Bit 537" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND536 ,Set/Clear Pending Bit 536" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND535 ,Set/Clear Pending Bit 535" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND534 ,Set/Clear Pending Bit 534" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND533 ,Set/Clear Pending Bit 533" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND532 ,Set/Clear Pending Bit 532" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND531 ,Set/Clear Pending Bit 531" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND530 ,Set/Clear Pending Bit 530" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND529 ,Set/Clear Pending Bit 529" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND528 ,Set/Clear Pending Bit 528" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND527 ,Set/Clear Pending Bit 527" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND526 ,Set/Clear Pending Bit 526" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND525 ,Set/Clear Pending Bit 525" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND524 ,Set/Clear Pending Bit 524" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND523 ,Set/Clear Pending Bit 523" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND522 ,Set/Clear Pending Bit 522" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND521 ,Set/Clear Pending Bit 521" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND520 ,Set/Clear Pending Bit 520" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND519 ,Set/Clear Pending Bit 519" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND518 ,Set/Clear Pending Bit 518" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND517 ,Set/Clear Pending Bit 517" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND516 ,Set/Clear Pending Bit 516" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND515 ,Set/Clear Pending Bit 515" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND514 ,Set/Clear Pending Bit 514" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND513 ,Set/Clear Pending Bit 513" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND512 ,Set/Clear Pending Bit 512" "Not pending,Pending" else rgroup.long 0x0240++0x03 line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) group.long 0x0244++0x03 line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND575 ,Set/Clear Pending Bit 575" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND574 ,Set/Clear Pending Bit 574" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND573 ,Set/Clear Pending Bit 573" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND572 ,Set/Clear Pending Bit 572" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND571 ,Set/Clear Pending Bit 571" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND570 ,Set/Clear Pending Bit 570" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND569 ,Set/Clear Pending Bit 569" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND568 ,Set/Clear Pending Bit 568" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND567 ,Set/Clear Pending Bit 567" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND566 ,Set/Clear Pending Bit 566" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND565 ,Set/Clear Pending Bit 565" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND564 ,Set/Clear Pending Bit 564" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND563 ,Set/Clear Pending Bit 563" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND562 ,Set/Clear Pending Bit 562" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND561 ,Set/Clear Pending Bit 561" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND560 ,Set/Clear Pending Bit 560" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND559 ,Set/Clear Pending Bit 559" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND558 ,Set/Clear Pending Bit 558" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND557 ,Set/Clear Pending Bit 557" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND556 ,Set/Clear Pending Bit 556" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND555 ,Set/Clear Pending Bit 555" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND554 ,Set/Clear Pending Bit 554" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND553 ,Set/Clear Pending Bit 553" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND552 ,Set/Clear Pending Bit 552" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND551 ,Set/Clear Pending Bit 551" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND550 ,Set/Clear Pending Bit 550" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND549 ,Set/Clear Pending Bit 549" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND548 ,Set/Clear Pending Bit 548" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND547 ,Set/Clear Pending Bit 547" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND546 ,Set/Clear Pending Bit 546" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND545 ,Set/Clear Pending Bit 545" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND544 ,Set/Clear Pending Bit 544" "Not pending,Pending" else rgroup.long 0x0244++0x03 line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) group.long 0x0248++0x03 line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND607 ,Set/Clear Pending Bit 607" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND606 ,Set/Clear Pending Bit 606" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND605 ,Set/Clear Pending Bit 605" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND604 ,Set/Clear Pending Bit 604" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND603 ,Set/Clear Pending Bit 603" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND602 ,Set/Clear Pending Bit 602" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND601 ,Set/Clear Pending Bit 601" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND600 ,Set/Clear Pending Bit 600" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND599 ,Set/Clear Pending Bit 599" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND598 ,Set/Clear Pending Bit 598" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND597 ,Set/Clear Pending Bit 597" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND596 ,Set/Clear Pending Bit 596" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND595 ,Set/Clear Pending Bit 595" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND594 ,Set/Clear Pending Bit 594" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND593 ,Set/Clear Pending Bit 593" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND592 ,Set/Clear Pending Bit 592" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND591 ,Set/Clear Pending Bit 591" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND590 ,Set/Clear Pending Bit 590" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND589 ,Set/Clear Pending Bit 589" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND588 ,Set/Clear Pending Bit 588" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND587 ,Set/Clear Pending Bit 587" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND586 ,Set/Clear Pending Bit 586" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND585 ,Set/Clear Pending Bit 585" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND584 ,Set/Clear Pending Bit 584" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND583 ,Set/Clear Pending Bit 583" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND582 ,Set/Clear Pending Bit 582" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND581 ,Set/Clear Pending Bit 581" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND580 ,Set/Clear Pending Bit 580" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND579 ,Set/Clear Pending Bit 579" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND578 ,Set/Clear Pending Bit 578" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND577 ,Set/Clear Pending Bit 577" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND576 ,Set/Clear Pending Bit 576" "Not pending,Pending" else rgroup.long 0x0248++0x03 line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) group.long 0x024C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND639 ,Set/Clear Pending Bit 639" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND638 ,Set/Clear Pending Bit 638" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND637 ,Set/Clear Pending Bit 637" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND636 ,Set/Clear Pending Bit 636" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND635 ,Set/Clear Pending Bit 635" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND634 ,Set/Clear Pending Bit 634" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND633 ,Set/Clear Pending Bit 633" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND632 ,Set/Clear Pending Bit 632" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND631 ,Set/Clear Pending Bit 631" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND630 ,Set/Clear Pending Bit 630" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND629 ,Set/Clear Pending Bit 629" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND628 ,Set/Clear Pending Bit 628" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND627 ,Set/Clear Pending Bit 627" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND626 ,Set/Clear Pending Bit 626" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND625 ,Set/Clear Pending Bit 625" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND624 ,Set/Clear Pending Bit 624" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND623 ,Set/Clear Pending Bit 623" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND622 ,Set/Clear Pending Bit 622" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND621 ,Set/Clear Pending Bit 621" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND620 ,Set/Clear Pending Bit 620" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND619 ,Set/Clear Pending Bit 619" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND618 ,Set/Clear Pending Bit 618" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND617 ,Set/Clear Pending Bit 617" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND616 ,Set/Clear Pending Bit 616" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND615 ,Set/Clear Pending Bit 615" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND614 ,Set/Clear Pending Bit 614" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND613 ,Set/Clear Pending Bit 613" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND612 ,Set/Clear Pending Bit 612" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND611 ,Set/Clear Pending Bit 611" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND610 ,Set/Clear Pending Bit 610" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND609 ,Set/Clear Pending Bit 609" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND608 ,Set/Clear Pending Bit 608" "Not pending,Pending" else rgroup.long 0x024C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) group.long 0x0250++0x03 line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND671 ,Set/Clear Pending Bit 671" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND670 ,Set/Clear Pending Bit 670" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND669 ,Set/Clear Pending Bit 669" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND668 ,Set/Clear Pending Bit 668" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND667 ,Set/Clear Pending Bit 667" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND666 ,Set/Clear Pending Bit 666" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND665 ,Set/Clear Pending Bit 665" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND664 ,Set/Clear Pending Bit 664" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND663 ,Set/Clear Pending Bit 663" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND662 ,Set/Clear Pending Bit 662" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND661 ,Set/Clear Pending Bit 661" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND660 ,Set/Clear Pending Bit 660" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND659 ,Set/Clear Pending Bit 659" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND658 ,Set/Clear Pending Bit 658" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND657 ,Set/Clear Pending Bit 657" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND656 ,Set/Clear Pending Bit 656" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND655 ,Set/Clear Pending Bit 655" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND654 ,Set/Clear Pending Bit 654" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND653 ,Set/Clear Pending Bit 653" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND652 ,Set/Clear Pending Bit 652" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND651 ,Set/Clear Pending Bit 651" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND650 ,Set/Clear Pending Bit 650" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND649 ,Set/Clear Pending Bit 649" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND648 ,Set/Clear Pending Bit 648" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND647 ,Set/Clear Pending Bit 647" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND646 ,Set/Clear Pending Bit 646" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND645 ,Set/Clear Pending Bit 645" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND644 ,Set/Clear Pending Bit 644" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND643 ,Set/Clear Pending Bit 643" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND642 ,Set/Clear Pending Bit 642" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND641 ,Set/Clear Pending Bit 641" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND640 ,Set/Clear Pending Bit 640" "Not pending,Pending" else rgroup.long 0x0250++0x03 line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) group.long 0x0254++0x03 line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND703 ,Set/Clear Pending Bit 703" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND702 ,Set/Clear Pending Bit 702" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND701 ,Set/Clear Pending Bit 701" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND700 ,Set/Clear Pending Bit 700" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND699 ,Set/Clear Pending Bit 699" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND698 ,Set/Clear Pending Bit 698" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND697 ,Set/Clear Pending Bit 697" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND696 ,Set/Clear Pending Bit 696" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND695 ,Set/Clear Pending Bit 695" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND694 ,Set/Clear Pending Bit 694" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND693 ,Set/Clear Pending Bit 693" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND692 ,Set/Clear Pending Bit 692" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND691 ,Set/Clear Pending Bit 691" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND690 ,Set/Clear Pending Bit 690" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND689 ,Set/Clear Pending Bit 689" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND688 ,Set/Clear Pending Bit 688" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND687 ,Set/Clear Pending Bit 687" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND686 ,Set/Clear Pending Bit 686" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND685 ,Set/Clear Pending Bit 685" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND684 ,Set/Clear Pending Bit 684" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND683 ,Set/Clear Pending Bit 683" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND682 ,Set/Clear Pending Bit 682" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND681 ,Set/Clear Pending Bit 681" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND680 ,Set/Clear Pending Bit 680" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND679 ,Set/Clear Pending Bit 679" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND678 ,Set/Clear Pending Bit 678" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND677 ,Set/Clear Pending Bit 677" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND676 ,Set/Clear Pending Bit 676" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND675 ,Set/Clear Pending Bit 675" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND674 ,Set/Clear Pending Bit 674" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND673 ,Set/Clear Pending Bit 673" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND672 ,Set/Clear Pending Bit 672" "Not pending,Pending" else rgroup.long 0x0254++0x03 line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) group.long 0x0258++0x03 line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND735 ,Set/Clear Pending Bit 735" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND734 ,Set/Clear Pending Bit 734" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND733 ,Set/Clear Pending Bit 733" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND732 ,Set/Clear Pending Bit 732" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND731 ,Set/Clear Pending Bit 731" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND730 ,Set/Clear Pending Bit 730" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND729 ,Set/Clear Pending Bit 729" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND728 ,Set/Clear Pending Bit 728" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND727 ,Set/Clear Pending Bit 727" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND726 ,Set/Clear Pending Bit 726" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND725 ,Set/Clear Pending Bit 725" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND724 ,Set/Clear Pending Bit 724" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND723 ,Set/Clear Pending Bit 723" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND722 ,Set/Clear Pending Bit 722" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND721 ,Set/Clear Pending Bit 721" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND720 ,Set/Clear Pending Bit 720" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND719 ,Set/Clear Pending Bit 719" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND718 ,Set/Clear Pending Bit 718" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND717 ,Set/Clear Pending Bit 717" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND716 ,Set/Clear Pending Bit 716" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND715 ,Set/Clear Pending Bit 715" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND714 ,Set/Clear Pending Bit 714" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND713 ,Set/Clear Pending Bit 713" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND712 ,Set/Clear Pending Bit 712" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND711 ,Set/Clear Pending Bit 711" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND710 ,Set/Clear Pending Bit 710" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND709 ,Set/Clear Pending Bit 709" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND708 ,Set/Clear Pending Bit 708" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND707 ,Set/Clear Pending Bit 707" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND706 ,Set/Clear Pending Bit 706" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND705 ,Set/Clear Pending Bit 705" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND704 ,Set/Clear Pending Bit 704" "Not pending,Pending" else rgroup.long 0x0258++0x03 line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) group.long 0x025C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND767 ,Set/Clear Pending Bit 767" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND766 ,Set/Clear Pending Bit 766" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND765 ,Set/Clear Pending Bit 765" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND764 ,Set/Clear Pending Bit 764" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND763 ,Set/Clear Pending Bit 763" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND762 ,Set/Clear Pending Bit 762" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND761 ,Set/Clear Pending Bit 761" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND760 ,Set/Clear Pending Bit 760" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND759 ,Set/Clear Pending Bit 759" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND758 ,Set/Clear Pending Bit 758" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND757 ,Set/Clear Pending Bit 757" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND756 ,Set/Clear Pending Bit 756" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND755 ,Set/Clear Pending Bit 755" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND754 ,Set/Clear Pending Bit 754" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND753 ,Set/Clear Pending Bit 753" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND752 ,Set/Clear Pending Bit 752" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND751 ,Set/Clear Pending Bit 751" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND750 ,Set/Clear Pending Bit 750" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND749 ,Set/Clear Pending Bit 749" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND748 ,Set/Clear Pending Bit 748" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND747 ,Set/Clear Pending Bit 747" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND746 ,Set/Clear Pending Bit 746" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND745 ,Set/Clear Pending Bit 745" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND744 ,Set/Clear Pending Bit 744" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND743 ,Set/Clear Pending Bit 743" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND742 ,Set/Clear Pending Bit 742" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND741 ,Set/Clear Pending Bit 741" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND740 ,Set/Clear Pending Bit 740" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND739 ,Set/Clear Pending Bit 739" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND738 ,Set/Clear Pending Bit 738" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND737 ,Set/Clear Pending Bit 737" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND736 ,Set/Clear Pending Bit 736" "Not pending,Pending" else rgroup.long 0x025C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) group.long 0x0260++0x03 line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND799 ,Set/Clear Pending Bit 799" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND798 ,Set/Clear Pending Bit 798" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND797 ,Set/Clear Pending Bit 797" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND796 ,Set/Clear Pending Bit 796" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND795 ,Set/Clear Pending Bit 795" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND794 ,Set/Clear Pending Bit 794" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND793 ,Set/Clear Pending Bit 793" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND792 ,Set/Clear Pending Bit 792" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND791 ,Set/Clear Pending Bit 791" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND790 ,Set/Clear Pending Bit 790" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND789 ,Set/Clear Pending Bit 789" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND788 ,Set/Clear Pending Bit 788" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND787 ,Set/Clear Pending Bit 787" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND786 ,Set/Clear Pending Bit 786" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND785 ,Set/Clear Pending Bit 785" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND784 ,Set/Clear Pending Bit 784" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND783 ,Set/Clear Pending Bit 783" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND782 ,Set/Clear Pending Bit 782" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND781 ,Set/Clear Pending Bit 781" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND780 ,Set/Clear Pending Bit 780" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND779 ,Set/Clear Pending Bit 779" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND778 ,Set/Clear Pending Bit 778" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND777 ,Set/Clear Pending Bit 777" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND776 ,Set/Clear Pending Bit 776" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND775 ,Set/Clear Pending Bit 775" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND774 ,Set/Clear Pending Bit 774" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND773 ,Set/Clear Pending Bit 773" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND772 ,Set/Clear Pending Bit 772" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND771 ,Set/Clear Pending Bit 771" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND770 ,Set/Clear Pending Bit 770" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND769 ,Set/Clear Pending Bit 769" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND768 ,Set/Clear Pending Bit 768" "Not pending,Pending" else rgroup.long 0x0260++0x03 line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) group.long 0x0264++0x03 line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND831 ,Set/Clear Pending Bit 831" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND830 ,Set/Clear Pending Bit 830" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND829 ,Set/Clear Pending Bit 829" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND828 ,Set/Clear Pending Bit 828" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND827 ,Set/Clear Pending Bit 827" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND826 ,Set/Clear Pending Bit 826" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND825 ,Set/Clear Pending Bit 825" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND824 ,Set/Clear Pending Bit 824" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND823 ,Set/Clear Pending Bit 823" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND822 ,Set/Clear Pending Bit 822" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND821 ,Set/Clear Pending Bit 821" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND820 ,Set/Clear Pending Bit 820" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND819 ,Set/Clear Pending Bit 819" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND818 ,Set/Clear Pending Bit 818" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND817 ,Set/Clear Pending Bit 817" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND816 ,Set/Clear Pending Bit 816" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND815 ,Set/Clear Pending Bit 815" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND814 ,Set/Clear Pending Bit 814" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND813 ,Set/Clear Pending Bit 813" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND812 ,Set/Clear Pending Bit 812" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND811 ,Set/Clear Pending Bit 811" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND810 ,Set/Clear Pending Bit 810" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND809 ,Set/Clear Pending Bit 809" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND808 ,Set/Clear Pending Bit 808" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND807 ,Set/Clear Pending Bit 807" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND806 ,Set/Clear Pending Bit 806" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND805 ,Set/Clear Pending Bit 805" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND804 ,Set/Clear Pending Bit 804" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND803 ,Set/Clear Pending Bit 803" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND802 ,Set/Clear Pending Bit 802" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND801 ,Set/Clear Pending Bit 801" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND800 ,Set/Clear Pending Bit 800" "Not pending,Pending" else rgroup.long 0x0264++0x03 line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) group.long 0x0268++0x03 line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND863 ,Set/Clear Pending Bit 863" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND862 ,Set/Clear Pending Bit 862" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND861 ,Set/Clear Pending Bit 861" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND860 ,Set/Clear Pending Bit 860" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND859 ,Set/Clear Pending Bit 859" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND858 ,Set/Clear Pending Bit 858" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND857 ,Set/Clear Pending Bit 857" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND856 ,Set/Clear Pending Bit 856" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND855 ,Set/Clear Pending Bit 855" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND854 ,Set/Clear Pending Bit 854" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND853 ,Set/Clear Pending Bit 853" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND852 ,Set/Clear Pending Bit 852" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND851 ,Set/Clear Pending Bit 851" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND850 ,Set/Clear Pending Bit 850" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND849 ,Set/Clear Pending Bit 849" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND848 ,Set/Clear Pending Bit 848" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND847 ,Set/Clear Pending Bit 847" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND846 ,Set/Clear Pending Bit 846" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND845 ,Set/Clear Pending Bit 845" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND844 ,Set/Clear Pending Bit 844" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND843 ,Set/Clear Pending Bit 843" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND842 ,Set/Clear Pending Bit 842" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND841 ,Set/Clear Pending Bit 841" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND840 ,Set/Clear Pending Bit 840" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND839 ,Set/Clear Pending Bit 839" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND838 ,Set/Clear Pending Bit 838" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND837 ,Set/Clear Pending Bit 837" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND836 ,Set/Clear Pending Bit 836" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND835 ,Set/Clear Pending Bit 835" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND834 ,Set/Clear Pending Bit 834" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND833 ,Set/Clear Pending Bit 833" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND832 ,Set/Clear Pending Bit 832" "Not pending,Pending" else rgroup.long 0x0268++0x03 line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) group.long 0x026C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND895 ,Set/Clear Pending Bit 895" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND894 ,Set/Clear Pending Bit 894" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND893 ,Set/Clear Pending Bit 893" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND892 ,Set/Clear Pending Bit 892" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND891 ,Set/Clear Pending Bit 891" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND890 ,Set/Clear Pending Bit 890" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND889 ,Set/Clear Pending Bit 889" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND888 ,Set/Clear Pending Bit 888" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND887 ,Set/Clear Pending Bit 887" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND886 ,Set/Clear Pending Bit 886" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND885 ,Set/Clear Pending Bit 885" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND884 ,Set/Clear Pending Bit 884" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND883 ,Set/Clear Pending Bit 883" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND882 ,Set/Clear Pending Bit 882" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND881 ,Set/Clear Pending Bit 881" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND880 ,Set/Clear Pending Bit 880" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND879 ,Set/Clear Pending Bit 879" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND878 ,Set/Clear Pending Bit 878" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND877 ,Set/Clear Pending Bit 877" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND876 ,Set/Clear Pending Bit 876" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND875 ,Set/Clear Pending Bit 875" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND874 ,Set/Clear Pending Bit 874" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND873 ,Set/Clear Pending Bit 873" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND872 ,Set/Clear Pending Bit 872" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND871 ,Set/Clear Pending Bit 871" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND870 ,Set/Clear Pending Bit 870" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND869 ,Set/Clear Pending Bit 869" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND868 ,Set/Clear Pending Bit 868" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND867 ,Set/Clear Pending Bit 867" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND866 ,Set/Clear Pending Bit 866" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND865 ,Set/Clear Pending Bit 865" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND864 ,Set/Clear Pending Bit 864" "Not pending,Pending" else rgroup.long 0x026C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) group.long 0x0270++0x03 line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND927 ,Set/Clear Pending Bit 927" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND926 ,Set/Clear Pending Bit 926" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND925 ,Set/Clear Pending Bit 925" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND924 ,Set/Clear Pending Bit 924" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND923 ,Set/Clear Pending Bit 923" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND922 ,Set/Clear Pending Bit 922" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND921 ,Set/Clear Pending Bit 921" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND920 ,Set/Clear Pending Bit 920" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND919 ,Set/Clear Pending Bit 919" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND918 ,Set/Clear Pending Bit 918" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND917 ,Set/Clear Pending Bit 917" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND916 ,Set/Clear Pending Bit 916" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND915 ,Set/Clear Pending Bit 915" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND914 ,Set/Clear Pending Bit 914" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND913 ,Set/Clear Pending Bit 913" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND912 ,Set/Clear Pending Bit 912" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND911 ,Set/Clear Pending Bit 911" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND910 ,Set/Clear Pending Bit 910" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND909 ,Set/Clear Pending Bit 909" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND908 ,Set/Clear Pending Bit 908" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND907 ,Set/Clear Pending Bit 907" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND906 ,Set/Clear Pending Bit 906" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND905 ,Set/Clear Pending Bit 905" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND904 ,Set/Clear Pending Bit 904" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND903 ,Set/Clear Pending Bit 903" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND902 ,Set/Clear Pending Bit 902" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND901 ,Set/Clear Pending Bit 901" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND900 ,Set/Clear Pending Bit 900" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND899 ,Set/Clear Pending Bit 899" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND898 ,Set/Clear Pending Bit 898" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND897 ,Set/Clear Pending Bit 897" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND896 ,Set/Clear Pending Bit 896" "Not pending,Pending" else rgroup.long 0x0270++0x03 line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) group.long 0x0274++0x03 line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND959 ,Set/Clear Pending Bit 959" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND958 ,Set/Clear Pending Bit 958" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND957 ,Set/Clear Pending Bit 957" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND956 ,Set/Clear Pending Bit 956" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND955 ,Set/Clear Pending Bit 955" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND954 ,Set/Clear Pending Bit 954" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND953 ,Set/Clear Pending Bit 953" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND952 ,Set/Clear Pending Bit 952" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND951 ,Set/Clear Pending Bit 951" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND950 ,Set/Clear Pending Bit 950" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND949 ,Set/Clear Pending Bit 949" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND948 ,Set/Clear Pending Bit 948" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND947 ,Set/Clear Pending Bit 947" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND946 ,Set/Clear Pending Bit 946" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND945 ,Set/Clear Pending Bit 945" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND944 ,Set/Clear Pending Bit 944" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND943 ,Set/Clear Pending Bit 943" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND942 ,Set/Clear Pending Bit 942" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND941 ,Set/Clear Pending Bit 941" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND940 ,Set/Clear Pending Bit 940" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND939 ,Set/Clear Pending Bit 939" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND938 ,Set/Clear Pending Bit 938" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND937 ,Set/Clear Pending Bit 937" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND936 ,Set/Clear Pending Bit 936" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND935 ,Set/Clear Pending Bit 935" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND934 ,Set/Clear Pending Bit 934" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND933 ,Set/Clear Pending Bit 933" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND932 ,Set/Clear Pending Bit 932" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND931 ,Set/Clear Pending Bit 931" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND930 ,Set/Clear Pending Bit 930" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND929 ,Set/Clear Pending Bit 929" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND928 ,Set/Clear Pending Bit 928" "Not pending,Pending" else rgroup.long 0x0274++0x03 line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) group.long 0x0278++0x03 line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND991 ,Set/Clear Pending Bit 991" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND990 ,Set/Clear Pending Bit 990" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND989 ,Set/Clear Pending Bit 989" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND988 ,Set/Clear Pending Bit 988" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND987 ,Set/Clear Pending Bit 987" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND986 ,Set/Clear Pending Bit 986" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND985 ,Set/Clear Pending Bit 985" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND984 ,Set/Clear Pending Bit 984" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND983 ,Set/Clear Pending Bit 983" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND982 ,Set/Clear Pending Bit 982" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND981 ,Set/Clear Pending Bit 981" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND980 ,Set/Clear Pending Bit 980" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND979 ,Set/Clear Pending Bit 979" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND978 ,Set/Clear Pending Bit 978" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND977 ,Set/Clear Pending Bit 977" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND976 ,Set/Clear Pending Bit 976" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND975 ,Set/Clear Pending Bit 975" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND974 ,Set/Clear Pending Bit 974" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND973 ,Set/Clear Pending Bit 973" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND972 ,Set/Clear Pending Bit 972" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND971 ,Set/Clear Pending Bit 971" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND970 ,Set/Clear Pending Bit 970" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND969 ,Set/Clear Pending Bit 969" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND968 ,Set/Clear Pending Bit 968" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND967 ,Set/Clear Pending Bit 967" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND966 ,Set/Clear Pending Bit 966" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND965 ,Set/Clear Pending Bit 965" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND964 ,Set/Clear Pending Bit 964" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND963 ,Set/Clear Pending Bit 963" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND962 ,Set/Clear Pending Bit 962" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND961 ,Set/Clear Pending Bit 961" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND960 ,Set/Clear Pending Bit 960" "Not pending,Pending" else rgroup.long 0x0278++0x03 line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)==0x1F) group.long 0x027C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND1019 ,Set/Clear Pending Bit 1019" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND1018 ,Set/Clear Pending Bit 1018" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND1017 ,Set/Clear Pending Bit 1017" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND1016 ,Set/Clear Pending Bit 1016" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND1015 ,Set/Clear Pending Bit 1015" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND1014 ,Set/Clear Pending Bit 1014" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND1013 ,Set/Clear Pending Bit 1013" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND1012 ,Set/Clear Pending Bit 1012" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND1011 ,Set/Clear Pending Bit 1011" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND1010 ,Set/Clear Pending Bit 1010" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND1009 ,Set/Clear Pending Bit 1009" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND1008 ,Set/Clear Pending Bit 1008" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND1007 ,Set/Clear Pending Bit 1007" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND1006 ,Set/Clear Pending Bit 1006" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND1005 ,Set/Clear Pending Bit 1005" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND1004 ,Set/Clear Pending Bit 1004" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND1003 ,Set/Clear Pending Bit 1003" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND1002 ,Set/Clear Pending Bit 1002" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND1001 ,Set/Clear Pending Bit 1001" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND1000 ,Set/Clear Pending Bit 1000" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND999 ,Set/Clear Pending Bit 999" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND998 ,Set/Clear Pending Bit 998" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND997 ,Set/Clear Pending Bit 997" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND996 ,Set/Clear Pending Bit 996" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND995 ,Set/Clear Pending Bit 995" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND994 ,Set/Clear Pending Bit 994" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND993 ,Set/Clear Pending Bit 993" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND992 ,Set/Clear Pending Bit 992" "Not pending,Pending" else rgroup.long 0x027C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 24. tree "Set/Clear Active Registers" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x08))&0xFF000000)==(0x0000000||0x1000000)) rgroup.long 0x0300++0x03 line.long 0x0 "GICD_ICDABR0,Active Status Register 0" bitfld.long 0x00 31. " ASB31 ,Active Status Bit 31" "Not active,Active" bitfld.long 0x00 30. " ASB30 ,Active Status Bit 30" "Not active,Active" bitfld.long 0x00 29. " ASB29 ,Active Status Bit 29" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB28 ,Active Status Bit 28" "Not active,Active" bitfld.long 0x00 27. " ASB27 ,Active Status Bit 27" "Not active,Active" bitfld.long 0x00 26. " ASB26 ,Active Status Bit 26" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB25 ,Active Status Bit 25" "Not active,Active" bitfld.long 0x00 24. " ASB24 ,Active Status Bit 24" "Not active,Active" bitfld.long 0x00 23. " ASB23 ,Active Status Bit 23" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB22 ,Active Status Bit 22" "Not active,Active" bitfld.long 0x00 21. " ASB21 ,Active Status Bit 21" "Not active,Active" bitfld.long 0x00 20. " ASB20 ,Active Status Bit 20" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB19 ,Active Status Bit 19" "Not active,Active" bitfld.long 0x00 18. " ASB18 ,Active Status Bit 18" "Not active,Active" bitfld.long 0x00 17. " ASB17 ,Active Status Bit 17" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB16 ,Active Status Bit 16" "Not active,Active" bitfld.long 0x00 15. " ASB15 ,Active Status Bit 15" "Not active,Active" bitfld.long 0x00 14. " ASB14 ,Active Status Bit 14" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB13 ,Active Status Bit 13" "Not active,Active" bitfld.long 0x00 12. " ASB12 ,Active Status Bit 12" "Not active,Active" bitfld.long 0x00 11. " ASB11 ,Active Status Bit 11" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB10 ,Active Status Bit 10" "Not active,Active" bitfld.long 0x00 9. " ASB9 ,Active Status Bit 9" "Not active,Active" bitfld.long 0x00 8. " ASB8 ,Active Status Bit 8" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB7 ,Active Status Bit 7" "Not active,Active" bitfld.long 0x00 6. " ASB6 ,Active Status Bit 6" "Not active,Active" bitfld.long 0x00 5. " ASB5 ,Active Status Bit 5" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB4 ,Active Status Bit 4" "Not active,Active" bitfld.long 0x00 3. " ASB3 ,Active Status Bit 3" "Not active,Active" bitfld.long 0x00 2. " ASB2 ,Active Status Bit 2" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB1 ,Active Status Bit 1" "Not active,Active" bitfld.long 0x00 0. " ASB0 ,Active Status Bit 0" "Not active,Active" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) rgroup.long 0x0304++0x03 line.long 0x0 "GICD_ICDABR1,Active Status Register 1" bitfld.long 0x00 31. " ASB63 ,Active Status Bit 63" "Not active,Active" bitfld.long 0x00 30. " ASB62 ,Active Status Bit 62" "Not active,Active" bitfld.long 0x00 29. " ASB61 ,Active Status Bit 61" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB60 ,Active Status Bit 60" "Not active,Active" bitfld.long 0x00 27. " ASB59 ,Active Status Bit 59" "Not active,Active" bitfld.long 0x00 26. " ASB58 ,Active Status Bit 58" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB57 ,Active Status Bit 57" "Not active,Active" bitfld.long 0x00 24. " ASB56 ,Active Status Bit 56" "Not active,Active" bitfld.long 0x00 23. " ASB55 ,Active Status Bit 55" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB54 ,Active Status Bit 54" "Not active,Active" bitfld.long 0x00 21. " ASB53 ,Active Status Bit 53" "Not active,Active" bitfld.long 0x00 20. " ASB52 ,Active Status Bit 52" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB51 ,Active Status Bit 51" "Not active,Active" bitfld.long 0x00 18. " ASB50 ,Active Status Bit 50" "Not active,Active" bitfld.long 0x00 17. " ASB49 ,Active Status Bit 49" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB48 ,Active Status Bit 48" "Not active,Active" bitfld.long 0x00 15. " ASB47 ,Active Status Bit 47" "Not active,Active" bitfld.long 0x00 14. " ASB46 ,Active Status Bit 46" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB45 ,Active Status Bit 45" "Not active,Active" bitfld.long 0x00 12. " ASB44 ,Active Status Bit 44" "Not active,Active" bitfld.long 0x00 11. " ASB43 ,Active Status Bit 43" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB42 ,Active Status Bit 42" "Not active,Active" bitfld.long 0x00 9. " ASB41 ,Active Status Bit 41" "Not active,Active" bitfld.long 0x00 8. " ASB40 ,Active Status Bit 40" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB39 ,Active Status Bit 39" "Not active,Active" bitfld.long 0x00 6. " ASB38 ,Active Status Bit 38" "Not active,Active" bitfld.long 0x00 5. " ASB37 ,Active Status Bit 37" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB36 ,Active Status Bit 36" "Not active,Active" bitfld.long 0x00 3. " ASB35 ,Active Status Bit 35" "Not active,Active" bitfld.long 0x00 2. " ASB34 ,Active Status Bit 34" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB33 ,Active Status Bit 33" "Not active,Active" bitfld.long 0x00 0. " ASB32 ,Active Status Bit 32" "Not active,Active" else rgroup.long 0x0304++0x03 line.long 0x0 "GICD_ICDABR1,Active Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) rgroup.long 0x0308++0x03 line.long 0x0 "GICD_ICDABR2,Active Status Register 2" bitfld.long 0x00 31. " ASB95 ,Active Status Bit 95" "Not active,Active" bitfld.long 0x00 30. " ASB94 ,Active Status Bit 94" "Not active,Active" bitfld.long 0x00 29. " ASB93 ,Active Status Bit 93" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB92 ,Active Status Bit 92" "Not active,Active" bitfld.long 0x00 27. " ASB91 ,Active Status Bit 91" "Not active,Active" bitfld.long 0x00 26. " ASB90 ,Active Status Bit 90" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB89 ,Active Status Bit 89" "Not active,Active" bitfld.long 0x00 24. " ASB88 ,Active Status Bit 88" "Not active,Active" bitfld.long 0x00 23. " ASB87 ,Active Status Bit 87" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB86 ,Active Status Bit 86" "Not active,Active" bitfld.long 0x00 21. " ASB85 ,Active Status Bit 85" "Not active,Active" bitfld.long 0x00 20. " ASB84 ,Active Status Bit 84" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB83 ,Active Status Bit 83" "Not active,Active" bitfld.long 0x00 18. " ASB82 ,Active Status Bit 82" "Not active,Active" bitfld.long 0x00 17. " ASB81 ,Active Status Bit 81" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB80 ,Active Status Bit 80" "Not active,Active" bitfld.long 0x00 15. " ASB79 ,Active Status Bit 79" "Not active,Active" bitfld.long 0x00 14. " ASB78 ,Active Status Bit 78" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB77 ,Active Status Bit 77" "Not active,Active" bitfld.long 0x00 12. " ASB76 ,Active Status Bit 76" "Not active,Active" bitfld.long 0x00 11. " ASB75 ,Active Status Bit 75" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB74 ,Active Status Bit 74" "Not active,Active" bitfld.long 0x00 9. " ASB73 ,Active Status Bit 73" "Not active,Active" bitfld.long 0x00 8. " ASB72 ,Active Status Bit 72" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB71 ,Active Status Bit 71" "Not active,Active" bitfld.long 0x00 6. " ASB70 ,Active Status Bit 70" "Not active,Active" bitfld.long 0x00 5. " ASB69 ,Active Status Bit 69" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB68 ,Active Status Bit 68" "Not active,Active" bitfld.long 0x00 3. " ASB67 ,Active Status Bit 67" "Not active,Active" bitfld.long 0x00 2. " ASB66 ,Active Status Bit 66" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB65 ,Active Status Bit 65" "Not active,Active" bitfld.long 0x00 0. " ASB64 ,Active Status Bit 64" "Not active,Active" else rgroup.long 0x0308++0x03 line.long 0x0 "GICD_ICDABR2,Active Status Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) rgroup.long 0x030C++0x03 line.long 0x0 "GICD_ICDABR3,Active Status Register 3" bitfld.long 0x00 31. " ASB127 ,Active Status Bit 127" "Not active,Active" bitfld.long 0x00 30. " ASB126 ,Active Status Bit 126" "Not active,Active" bitfld.long 0x00 29. " ASB125 ,Active Status Bit 125" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB124 ,Active Status Bit 124" "Not active,Active" bitfld.long 0x00 27. " ASB123 ,Active Status Bit 123" "Not active,Active" bitfld.long 0x00 26. " ASB122 ,Active Status Bit 122" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB121 ,Active Status Bit 121" "Not active,Active" bitfld.long 0x00 24. " ASB120 ,Active Status Bit 120" "Not active,Active" bitfld.long 0x00 23. " ASB119 ,Active Status Bit 119" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB118 ,Active Status Bit 118" "Not active,Active" bitfld.long 0x00 21. " ASB117 ,Active Status Bit 117" "Not active,Active" bitfld.long 0x00 20. " ASB116 ,Active Status Bit 116" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB115 ,Active Status Bit 115" "Not active,Active" bitfld.long 0x00 18. " ASB114 ,Active Status Bit 114" "Not active,Active" bitfld.long 0x00 17. " ASB113 ,Active Status Bit 113" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB112 ,Active Status Bit 112" "Not active,Active" bitfld.long 0x00 15. " ASB111 ,Active Status Bit 111" "Not active,Active" bitfld.long 0x00 14. " ASB110 ,Active Status Bit 110" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB109 ,Active Status Bit 109" "Not active,Active" bitfld.long 0x00 12. " ASB108 ,Active Status Bit 108" "Not active,Active" bitfld.long 0x00 11. " ASB107 ,Active Status Bit 107" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB106 ,Active Status Bit 106" "Not active,Active" bitfld.long 0x00 9. " ASB105 ,Active Status Bit 105" "Not active,Active" bitfld.long 0x00 8. " ASB104 ,Active Status Bit 104" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB103 ,Active Status Bit 103" "Not active,Active" bitfld.long 0x00 6. " ASB102 ,Active Status Bit 102" "Not active,Active" bitfld.long 0x00 5. " ASB101 ,Active Status Bit 101" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB100 ,Active Status Bit 100" "Not active,Active" bitfld.long 0x00 3. " ASB99 ,Active Status Bit 99" "Not active,Active" bitfld.long 0x00 2. " ASB98 ,Active Status Bit 98" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB97 ,Active Status Bit 97" "Not active,Active" bitfld.long 0x00 0. " ASB96 ,Active Status Bit 96" "Not active,Active" else rgroup.long 0x030C++0x03 line.long 0x0 "GICD_ICDABR3,Active Status Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) rgroup.long 0x0310++0x03 line.long 0x0 "GICD_ICDABR4,Active Status Register 4" bitfld.long 0x00 31. " ASB159 ,Active Status Bit 159" "Not active,Active" bitfld.long 0x00 30. " ASB158 ,Active Status Bit 158" "Not active,Active" bitfld.long 0x00 29. " ASB157 ,Active Status Bit 157" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB156 ,Active Status Bit 156" "Not active,Active" bitfld.long 0x00 27. " ASB155 ,Active Status Bit 155" "Not active,Active" bitfld.long 0x00 26. " ASB154 ,Active Status Bit 154" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB153 ,Active Status Bit 153" "Not active,Active" bitfld.long 0x00 24. " ASB152 ,Active Status Bit 152" "Not active,Active" bitfld.long 0x00 23. " ASB151 ,Active Status Bit 151" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB150 ,Active Status Bit 150" "Not active,Active" bitfld.long 0x00 21. " ASB149 ,Active Status Bit 149" "Not active,Active" bitfld.long 0x00 20. " ASB148 ,Active Status Bit 148" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB147 ,Active Status Bit 147" "Not active,Active" bitfld.long 0x00 18. " ASB146 ,Active Status Bit 146" "Not active,Active" bitfld.long 0x00 17. " ASB145 ,Active Status Bit 145" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB144 ,Active Status Bit 144" "Not active,Active" bitfld.long 0x00 15. " ASB143 ,Active Status Bit 143" "Not active,Active" bitfld.long 0x00 14. " ASB142 ,Active Status Bit 142" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB141 ,Active Status Bit 141" "Not active,Active" bitfld.long 0x00 12. " ASB140 ,Active Status Bit 140" "Not active,Active" bitfld.long 0x00 11. " ASB139 ,Active Status Bit 139" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB138 ,Active Status Bit 138" "Not active,Active" bitfld.long 0x00 9. " ASB137 ,Active Status Bit 137" "Not active,Active" bitfld.long 0x00 8. " ASB136 ,Active Status Bit 136" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB135 ,Active Status Bit 135" "Not active,Active" bitfld.long 0x00 6. " ASB134 ,Active Status Bit 134" "Not active,Active" bitfld.long 0x00 5. " ASB133 ,Active Status Bit 133" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB132 ,Active Status Bit 132" "Not active,Active" bitfld.long 0x00 3. " ASB131 ,Active Status Bit 131" "Not active,Active" bitfld.long 0x00 2. " ASB130 ,Active Status Bit 130" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB129 ,Active Status Bit 129" "Not active,Active" bitfld.long 0x00 0. " ASB128 ,Active Status Bit 128" "Not active,Active" else rgroup.long 0x0310++0x03 line.long 0x0 "GICD_ICDABR4,Active Status Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) rgroup.long 0x0314++0x03 line.long 0x0 "GICD_ICDABR5,Active Status Register 5" bitfld.long 0x00 31. " ASB191 ,Active Status Bit 191" "Not active,Active" bitfld.long 0x00 30. " ASB190 ,Active Status Bit 190" "Not active,Active" bitfld.long 0x00 29. " ASB189 ,Active Status Bit 189" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB188 ,Active Status Bit 188" "Not active,Active" bitfld.long 0x00 27. " ASB187 ,Active Status Bit 187" "Not active,Active" bitfld.long 0x00 26. " ASB186 ,Active Status Bit 186" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB185 ,Active Status Bit 185" "Not active,Active" bitfld.long 0x00 24. " ASB184 ,Active Status Bit 184" "Not active,Active" bitfld.long 0x00 23. " ASB183 ,Active Status Bit 183" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB182 ,Active Status Bit 182" "Not active,Active" bitfld.long 0x00 21. " ASB181 ,Active Status Bit 181" "Not active,Active" bitfld.long 0x00 20. " ASB180 ,Active Status Bit 180" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB179 ,Active Status Bit 179" "Not active,Active" bitfld.long 0x00 18. " ASB178 ,Active Status Bit 178" "Not active,Active" bitfld.long 0x00 17. " ASB177 ,Active Status Bit 177" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB176 ,Active Status Bit 176" "Not active,Active" bitfld.long 0x00 15. " ASB175 ,Active Status Bit 175" "Not active,Active" bitfld.long 0x00 14. " ASB174 ,Active Status Bit 174" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB173 ,Active Status Bit 173" "Not active,Active" bitfld.long 0x00 12. " ASB172 ,Active Status Bit 172" "Not active,Active" bitfld.long 0x00 11. " ASB171 ,Active Status Bit 171" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB170 ,Active Status Bit 170" "Not active,Active" bitfld.long 0x00 9. " ASB169 ,Active Status Bit 169" "Not active,Active" bitfld.long 0x00 8. " ASB168 ,Active Status Bit 168" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB167 ,Active Status Bit 167" "Not active,Active" bitfld.long 0x00 6. " ASB166 ,Active Status Bit 166" "Not active,Active" bitfld.long 0x00 5. " ASB165 ,Active Status Bit 165" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB164 ,Active Status Bit 164" "Not active,Active" bitfld.long 0x00 3. " ASB163 ,Active Status Bit 163" "Not active,Active" bitfld.long 0x00 2. " ASB162 ,Active Status Bit 162" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB161 ,Active Status Bit 161" "Not active,Active" bitfld.long 0x00 0. " ASB160 ,Active Status Bit 160" "Not active,Active" else rgroup.long 0x0314++0x03 line.long 0x0 "GICD_ICDABR5,Active Status Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) rgroup.long 0x0318++0x03 line.long 0x0 "GICD_ICDABR6,Active Status Register 6" bitfld.long 0x00 31. " ASB223 ,Active Status Bit 223" "Not active,Active" bitfld.long 0x00 30. " ASB222 ,Active Status Bit 222" "Not active,Active" bitfld.long 0x00 29. " ASB221 ,Active Status Bit 221" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB220 ,Active Status Bit 220" "Not active,Active" bitfld.long 0x00 27. " ASB219 ,Active Status Bit 219" "Not active,Active" bitfld.long 0x00 26. " ASB218 ,Active Status Bit 218" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB217 ,Active Status Bit 217" "Not active,Active" bitfld.long 0x00 24. " ASB216 ,Active Status Bit 216" "Not active,Active" bitfld.long 0x00 23. " ASB215 ,Active Status Bit 215" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB214 ,Active Status Bit 214" "Not active,Active" bitfld.long 0x00 21. " ASB213 ,Active Status Bit 213" "Not active,Active" bitfld.long 0x00 20. " ASB212 ,Active Status Bit 212" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB211 ,Active Status Bit 211" "Not active,Active" bitfld.long 0x00 18. " ASB210 ,Active Status Bit 210" "Not active,Active" bitfld.long 0x00 17. " ASB209 ,Active Status Bit 209" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB208 ,Active Status Bit 208" "Not active,Active" bitfld.long 0x00 15. " ASB207 ,Active Status Bit 207" "Not active,Active" bitfld.long 0x00 14. " ASB206 ,Active Status Bit 206" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB205 ,Active Status Bit 205" "Not active,Active" bitfld.long 0x00 12. " ASB204 ,Active Status Bit 204" "Not active,Active" bitfld.long 0x00 11. " ASB203 ,Active Status Bit 203" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB202 ,Active Status Bit 202" "Not active,Active" bitfld.long 0x00 9. " ASB201 ,Active Status Bit 201" "Not active,Active" bitfld.long 0x00 8. " ASB200 ,Active Status Bit 200" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB199 ,Active Status Bit 199" "Not active,Active" bitfld.long 0x00 6. " ASB198 ,Active Status Bit 198" "Not active,Active" bitfld.long 0x00 5. " ASB197 ,Active Status Bit 197" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB196 ,Active Status Bit 196" "Not active,Active" bitfld.long 0x00 3. " ASB195 ,Active Status Bit 195" "Not active,Active" bitfld.long 0x00 2. " ASB194 ,Active Status Bit 194" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB193 ,Active Status Bit 193" "Not active,Active" bitfld.long 0x00 0. " ASB192 ,Active Status Bit 192" "Not active,Active" else rgroup.long 0x0318++0x03 line.long 0x0 "GICD_ICDABR6,Active Status Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) rgroup.long 0x031C++0x03 line.long 0x0 "GICD_ICDABR7,Active Status Register 7" bitfld.long 0x00 31. " ASB255 ,Active Status Bit 255" "Not active,Active" bitfld.long 0x00 30. " ASB254 ,Active Status Bit 254" "Not active,Active" bitfld.long 0x00 29. " ASB253 ,Active Status Bit 253" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB252 ,Active Status Bit 252" "Not active,Active" bitfld.long 0x00 27. " ASB251 ,Active Status Bit 251" "Not active,Active" bitfld.long 0x00 26. " ASB250 ,Active Status Bit 250" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB249 ,Active Status Bit 249" "Not active,Active" bitfld.long 0x00 24. " ASB248 ,Active Status Bit 248" "Not active,Active" bitfld.long 0x00 23. " ASB247 ,Active Status Bit 247" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB246 ,Active Status Bit 246" "Not active,Active" bitfld.long 0x00 21. " ASB245 ,Active Status Bit 245" "Not active,Active" bitfld.long 0x00 20. " ASB244 ,Active Status Bit 244" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB243 ,Active Status Bit 243" "Not active,Active" bitfld.long 0x00 18. " ASB242 ,Active Status Bit 242" "Not active,Active" bitfld.long 0x00 17. " ASB241 ,Active Status Bit 241" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB240 ,Active Status Bit 240" "Not active,Active" bitfld.long 0x00 15. " ASB239 ,Active Status Bit 239" "Not active,Active" bitfld.long 0x00 14. " ASB238 ,Active Status Bit 238" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB237 ,Active Status Bit 237" "Not active,Active" bitfld.long 0x00 12. " ASB236 ,Active Status Bit 236" "Not active,Active" bitfld.long 0x00 11. " ASB235 ,Active Status Bit 235" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB234 ,Active Status Bit 234" "Not active,Active" bitfld.long 0x00 9. " ASB233 ,Active Status Bit 233" "Not active,Active" bitfld.long 0x00 8. " ASB232 ,Active Status Bit 232" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB231 ,Active Status Bit 231" "Not active,Active" bitfld.long 0x00 6. " ASB230 ,Active Status Bit 230" "Not active,Active" bitfld.long 0x00 5. " ASB229 ,Active Status Bit 229" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB228 ,Active Status Bit 228" "Not active,Active" bitfld.long 0x00 3. " ASB227 ,Active Status Bit 227" "Not active,Active" bitfld.long 0x00 2. " ASB226 ,Active Status Bit 226" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB225 ,Active Status Bit 225" "Not active,Active" bitfld.long 0x00 0. " ASB224 ,Active Status Bit 224" "Not active,Active" else rgroup.long 0x031C++0x03 line.long 0x0 "GICD_ICDABR7,Active Status Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) rgroup.long 0x0320++0x03 line.long 0x0 "GICD_ICDABR8,Active Status Register 8" bitfld.long 0x00 31. " ASB287 ,Active Status Bit 287" "Not active,Active" bitfld.long 0x00 30. " ASB286 ,Active Status Bit 286" "Not active,Active" bitfld.long 0x00 29. " ASB285 ,Active Status Bit 285" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB284 ,Active Status Bit 284" "Not active,Active" bitfld.long 0x00 27. " ASB283 ,Active Status Bit 283" "Not active,Active" bitfld.long 0x00 26. " ASB282 ,Active Status Bit 282" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB281 ,Active Status Bit 281" "Not active,Active" bitfld.long 0x00 24. " ASB280 ,Active Status Bit 280" "Not active,Active" bitfld.long 0x00 23. " ASB279 ,Active Status Bit 279" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB278 ,Active Status Bit 278" "Not active,Active" bitfld.long 0x00 21. " ASB277 ,Active Status Bit 277" "Not active,Active" bitfld.long 0x00 20. " ASB276 ,Active Status Bit 276" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB275 ,Active Status Bit 275" "Not active,Active" bitfld.long 0x00 18. " ASB274 ,Active Status Bit 274" "Not active,Active" bitfld.long 0x00 17. " ASB273 ,Active Status Bit 273" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB272 ,Active Status Bit 272" "Not active,Active" bitfld.long 0x00 15. " ASB271 ,Active Status Bit 271" "Not active,Active" bitfld.long 0x00 14. " ASB270 ,Active Status Bit 270" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB269 ,Active Status Bit 269" "Not active,Active" bitfld.long 0x00 12. " ASB268 ,Active Status Bit 268" "Not active,Active" bitfld.long 0x00 11. " ASB267 ,Active Status Bit 267" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB266 ,Active Status Bit 266" "Not active,Active" bitfld.long 0x00 9. " ASB265 ,Active Status Bit 265" "Not active,Active" bitfld.long 0x00 8. " ASB264 ,Active Status Bit 264" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB263 ,Active Status Bit 263" "Not active,Active" bitfld.long 0x00 6. " ASB262 ,Active Status Bit 262" "Not active,Active" bitfld.long 0x00 5. " ASB261 ,Active Status Bit 261" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB260 ,Active Status Bit 260" "Not active,Active" bitfld.long 0x00 3. " ASB259 ,Active Status Bit 259" "Not active,Active" bitfld.long 0x00 2. " ASB258 ,Active Status Bit 258" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB257 ,Active Status Bit 257" "Not active,Active" bitfld.long 0x00 0. " ASB256 ,Active Status Bit 256" "Not active,Active" else rgroup.long 0x0320++0x03 line.long 0x0 "GICD_ICDABR8,Active Status Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) rgroup.long 0x0324++0x03 line.long 0x0 "GICD_ICDABR9,Active Status Register 9" bitfld.long 0x00 31. " ASB319 ,Active Status Bit 319" "Not active,Active" bitfld.long 0x00 30. " ASB318 ,Active Status Bit 318" "Not active,Active" bitfld.long 0x00 29. " ASB317 ,Active Status Bit 317" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB316 ,Active Status Bit 316" "Not active,Active" bitfld.long 0x00 27. " ASB315 ,Active Status Bit 315" "Not active,Active" bitfld.long 0x00 26. " ASB314 ,Active Status Bit 314" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB313 ,Active Status Bit 313" "Not active,Active" bitfld.long 0x00 24. " ASB312 ,Active Status Bit 312" "Not active,Active" bitfld.long 0x00 23. " ASB311 ,Active Status Bit 311" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB310 ,Active Status Bit 310" "Not active,Active" bitfld.long 0x00 21. " ASB309 ,Active Status Bit 309" "Not active,Active" bitfld.long 0x00 20. " ASB308 ,Active Status Bit 308" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB307 ,Active Status Bit 307" "Not active,Active" bitfld.long 0x00 18. " ASB306 ,Active Status Bit 306" "Not active,Active" bitfld.long 0x00 17. " ASB305 ,Active Status Bit 305" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB304 ,Active Status Bit 304" "Not active,Active" bitfld.long 0x00 15. " ASB303 ,Active Status Bit 303" "Not active,Active" bitfld.long 0x00 14. " ASB302 ,Active Status Bit 302" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB301 ,Active Status Bit 301" "Not active,Active" bitfld.long 0x00 12. " ASB300 ,Active Status Bit 300" "Not active,Active" bitfld.long 0x00 11. " ASB299 ,Active Status Bit 299" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB298 ,Active Status Bit 298" "Not active,Active" bitfld.long 0x00 9. " ASB297 ,Active Status Bit 297" "Not active,Active" bitfld.long 0x00 8. " ASB296 ,Active Status Bit 296" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB295 ,Active Status Bit 295" "Not active,Active" bitfld.long 0x00 6. " ASB294 ,Active Status Bit 294" "Not active,Active" bitfld.long 0x00 5. " ASB293 ,Active Status Bit 293" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB292 ,Active Status Bit 292" "Not active,Active" bitfld.long 0x00 3. " ASB291 ,Active Status Bit 291" "Not active,Active" bitfld.long 0x00 2. " ASB290 ,Active Status Bit 290" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB289 ,Active Status Bit 289" "Not active,Active" bitfld.long 0x00 0. " ASB288 ,Active Status Bit 288" "Not active,Active" else rgroup.long 0x0324++0x03 line.long 0x0 "GICD_ICDABR9,Active Status Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) rgroup.long 0x0328++0x03 line.long 0x0 "GICD_ICDABR10,Active Status Register 10" bitfld.long 0x00 31. " ASB351 ,Active Status Bit 351" "Not active,Active" bitfld.long 0x00 30. " ASB350 ,Active Status Bit 350" "Not active,Active" bitfld.long 0x00 29. " ASB349 ,Active Status Bit 349" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB348 ,Active Status Bit 348" "Not active,Active" bitfld.long 0x00 27. " ASB347 ,Active Status Bit 347" "Not active,Active" bitfld.long 0x00 26. " ASB346 ,Active Status Bit 346" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB345 ,Active Status Bit 345" "Not active,Active" bitfld.long 0x00 24. " ASB344 ,Active Status Bit 344" "Not active,Active" bitfld.long 0x00 23. " ASB343 ,Active Status Bit 343" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB342 ,Active Status Bit 342" "Not active,Active" bitfld.long 0x00 21. " ASB341 ,Active Status Bit 341" "Not active,Active" bitfld.long 0x00 20. " ASB340 ,Active Status Bit 340" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB339 ,Active Status Bit 339" "Not active,Active" bitfld.long 0x00 18. " ASB338 ,Active Status Bit 338" "Not active,Active" bitfld.long 0x00 17. " ASB337 ,Active Status Bit 337" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB336 ,Active Status Bit 336" "Not active,Active" bitfld.long 0x00 15. " ASB335 ,Active Status Bit 335" "Not active,Active" bitfld.long 0x00 14. " ASB334 ,Active Status Bit 334" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB333 ,Active Status Bit 333" "Not active,Active" bitfld.long 0x00 12. " ASB332 ,Active Status Bit 332" "Not active,Active" bitfld.long 0x00 11. " ASB331 ,Active Status Bit 331" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB330 ,Active Status Bit 330" "Not active,Active" bitfld.long 0x00 9. " ASB329 ,Active Status Bit 329" "Not active,Active" bitfld.long 0x00 8. " ASB328 ,Active Status Bit 328" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB327 ,Active Status Bit 327" "Not active,Active" bitfld.long 0x00 6. " ASB326 ,Active Status Bit 326" "Not active,Active" bitfld.long 0x00 5. " ASB325 ,Active Status Bit 325" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB324 ,Active Status Bit 324" "Not active,Active" bitfld.long 0x00 3. " ASB323 ,Active Status Bit 323" "Not active,Active" bitfld.long 0x00 2. " ASB322 ,Active Status Bit 322" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB321 ,Active Status Bit 321" "Not active,Active" bitfld.long 0x00 0. " ASB320 ,Active Status Bit 320" "Not active,Active" else rgroup.long 0x0328++0x03 line.long 0x0 "GICD_ICDABR10,Active Status Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) rgroup.long 0x032C++0x03 line.long 0x0 "GICD_ICDABR11,Active Status Register 11" bitfld.long 0x00 31. " ASB383 ,Active Status Bit 383" "Not active,Active" bitfld.long 0x00 30. " ASB382 ,Active Status Bit 382" "Not active,Active" bitfld.long 0x00 29. " ASB381 ,Active Status Bit 381" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB380 ,Active Status Bit 380" "Not active,Active" bitfld.long 0x00 27. " ASB379 ,Active Status Bit 379" "Not active,Active" bitfld.long 0x00 26. " ASB378 ,Active Status Bit 378" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB377 ,Active Status Bit 377" "Not active,Active" bitfld.long 0x00 24. " ASB376 ,Active Status Bit 376" "Not active,Active" bitfld.long 0x00 23. " ASB375 ,Active Status Bit 375" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB374 ,Active Status Bit 374" "Not active,Active" bitfld.long 0x00 21. " ASB373 ,Active Status Bit 373" "Not active,Active" bitfld.long 0x00 20. " ASB372 ,Active Status Bit 372" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB371 ,Active Status Bit 371" "Not active,Active" bitfld.long 0x00 18. " ASB370 ,Active Status Bit 370" "Not active,Active" bitfld.long 0x00 17. " ASB369 ,Active Status Bit 369" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB368 ,Active Status Bit 368" "Not active,Active" bitfld.long 0x00 15. " ASB367 ,Active Status Bit 367" "Not active,Active" bitfld.long 0x00 14. " ASB366 ,Active Status Bit 366" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB365 ,Active Status Bit 365" "Not active,Active" bitfld.long 0x00 12. " ASB364 ,Active Status Bit 364" "Not active,Active" bitfld.long 0x00 11. " ASB363 ,Active Status Bit 363" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB362 ,Active Status Bit 362" "Not active,Active" bitfld.long 0x00 9. " ASB361 ,Active Status Bit 361" "Not active,Active" bitfld.long 0x00 8. " ASB360 ,Active Status Bit 360" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB359 ,Active Status Bit 359" "Not active,Active" bitfld.long 0x00 6. " ASB358 ,Active Status Bit 358" "Not active,Active" bitfld.long 0x00 5. " ASB357 ,Active Status Bit 357" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB356 ,Active Status Bit 356" "Not active,Active" bitfld.long 0x00 3. " ASB355 ,Active Status Bit 355" "Not active,Active" bitfld.long 0x00 2. " ASB354 ,Active Status Bit 354" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB353 ,Active Status Bit 353" "Not active,Active" bitfld.long 0x00 0. " ASB352 ,Active Status Bit 352" "Not active,Active" else rgroup.long 0x032C++0x03 line.long 0x0 "GICD_ICDABR11,Active Status Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) rgroup.long 0x0330++0x03 line.long 0x0 "GICD_ICDABR12,Active Status Register 12" bitfld.long 0x00 31. " ASB415 ,Active Status Bit 415" "Not active,Active" bitfld.long 0x00 30. " ASB414 ,Active Status Bit 414" "Not active,Active" bitfld.long 0x00 29. " ASB413 ,Active Status Bit 413" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB412 ,Active Status Bit 412" "Not active,Active" bitfld.long 0x00 27. " ASB411 ,Active Status Bit 411" "Not active,Active" bitfld.long 0x00 26. " ASB410 ,Active Status Bit 410" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB409 ,Active Status Bit 409" "Not active,Active" bitfld.long 0x00 24. " ASB408 ,Active Status Bit 408" "Not active,Active" bitfld.long 0x00 23. " ASB407 ,Active Status Bit 407" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB406 ,Active Status Bit 406" "Not active,Active" bitfld.long 0x00 21. " ASB405 ,Active Status Bit 405" "Not active,Active" bitfld.long 0x00 20. " ASB404 ,Active Status Bit 404" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB403 ,Active Status Bit 403" "Not active,Active" bitfld.long 0x00 18. " ASB402 ,Active Status Bit 402" "Not active,Active" bitfld.long 0x00 17. " ASB401 ,Active Status Bit 401" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB400 ,Active Status Bit 400" "Not active,Active" bitfld.long 0x00 15. " ASB399 ,Active Status Bit 399" "Not active,Active" bitfld.long 0x00 14. " ASB398 ,Active Status Bit 398" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB397 ,Active Status Bit 397" "Not active,Active" bitfld.long 0x00 12. " ASB396 ,Active Status Bit 396" "Not active,Active" bitfld.long 0x00 11. " ASB395 ,Active Status Bit 395" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB394 ,Active Status Bit 394" "Not active,Active" bitfld.long 0x00 9. " ASB393 ,Active Status Bit 393" "Not active,Active" bitfld.long 0x00 8. " ASB392 ,Active Status Bit 392" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB391 ,Active Status Bit 391" "Not active,Active" bitfld.long 0x00 6. " ASB390 ,Active Status Bit 390" "Not active,Active" bitfld.long 0x00 5. " ASB389 ,Active Status Bit 389" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB388 ,Active Status Bit 388" "Not active,Active" bitfld.long 0x00 3. " ASB387 ,Active Status Bit 387" "Not active,Active" bitfld.long 0x00 2. " ASB386 ,Active Status Bit 386" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB385 ,Active Status Bit 385" "Not active,Active" bitfld.long 0x00 0. " ASB384 ,Active Status Bit 384" "Not active,Active" else rgroup.long 0x0330++0x03 line.long 0x0 "GICD_ICDABR12,Active Status Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) rgroup.long 0x0334++0x03 line.long 0x0 "GICD_ICDABR13,Active Status Register 13" bitfld.long 0x00 31. " ASB447 ,Active Status Bit 447" "Not active,Active" bitfld.long 0x00 30. " ASB446 ,Active Status Bit 446" "Not active,Active" bitfld.long 0x00 29. " ASB445 ,Active Status Bit 445" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB444 ,Active Status Bit 444" "Not active,Active" bitfld.long 0x00 27. " ASB443 ,Active Status Bit 443" "Not active,Active" bitfld.long 0x00 26. " ASB442 ,Active Status Bit 442" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB441 ,Active Status Bit 441" "Not active,Active" bitfld.long 0x00 24. " ASB440 ,Active Status Bit 440" "Not active,Active" bitfld.long 0x00 23. " ASB439 ,Active Status Bit 439" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB438 ,Active Status Bit 438" "Not active,Active" bitfld.long 0x00 21. " ASB437 ,Active Status Bit 437" "Not active,Active" bitfld.long 0x00 20. " ASB436 ,Active Status Bit 436" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB435 ,Active Status Bit 435" "Not active,Active" bitfld.long 0x00 18. " ASB434 ,Active Status Bit 434" "Not active,Active" bitfld.long 0x00 17. " ASB433 ,Active Status Bit 433" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB432 ,Active Status Bit 432" "Not active,Active" bitfld.long 0x00 15. " ASB431 ,Active Status Bit 431" "Not active,Active" bitfld.long 0x00 14. " ASB430 ,Active Status Bit 430" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB429 ,Active Status Bit 429" "Not active,Active" bitfld.long 0x00 12. " ASB428 ,Active Status Bit 428" "Not active,Active" bitfld.long 0x00 11. " ASB427 ,Active Status Bit 427" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB426 ,Active Status Bit 426" "Not active,Active" bitfld.long 0x00 9. " ASB425 ,Active Status Bit 425" "Not active,Active" bitfld.long 0x00 8. " ASB424 ,Active Status Bit 424" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB423 ,Active Status Bit 423" "Not active,Active" bitfld.long 0x00 6. " ASB422 ,Active Status Bit 422" "Not active,Active" bitfld.long 0x00 5. " ASB421 ,Active Status Bit 421" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB420 ,Active Status Bit 420" "Not active,Active" bitfld.long 0x00 3. " ASB419 ,Active Status Bit 419" "Not active,Active" bitfld.long 0x00 2. " ASB418 ,Active Status Bit 418" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB417 ,Active Status Bit 417" "Not active,Active" bitfld.long 0x00 0. " ASB416 ,Active Status Bit 416" "Not active,Active" else rgroup.long 0x0334++0x03 line.long 0x0 "GICD_ICDABR13,Active Status Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) rgroup.long 0x0338++0x03 line.long 0x0 "GICD_ICDABR14,Active Status Register 14" bitfld.long 0x00 31. " ASB479 ,Active Status Bit 479" "Not active,Active" bitfld.long 0x00 30. " ASB478 ,Active Status Bit 478" "Not active,Active" bitfld.long 0x00 29. " ASB477 ,Active Status Bit 477" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB476 ,Active Status Bit 476" "Not active,Active" bitfld.long 0x00 27. " ASB475 ,Active Status Bit 475" "Not active,Active" bitfld.long 0x00 26. " ASB474 ,Active Status Bit 474" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB473 ,Active Status Bit 473" "Not active,Active" bitfld.long 0x00 24. " ASB472 ,Active Status Bit 472" "Not active,Active" bitfld.long 0x00 23. " ASB471 ,Active Status Bit 471" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB470 ,Active Status Bit 470" "Not active,Active" bitfld.long 0x00 21. " ASB469 ,Active Status Bit 469" "Not active,Active" bitfld.long 0x00 20. " ASB468 ,Active Status Bit 468" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB467 ,Active Status Bit 467" "Not active,Active" bitfld.long 0x00 18. " ASB466 ,Active Status Bit 466" "Not active,Active" bitfld.long 0x00 17. " ASB465 ,Active Status Bit 465" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB464 ,Active Status Bit 464" "Not active,Active" bitfld.long 0x00 15. " ASB463 ,Active Status Bit 463" "Not active,Active" bitfld.long 0x00 14. " ASB462 ,Active Status Bit 462" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB461 ,Active Status Bit 461" "Not active,Active" bitfld.long 0x00 12. " ASB460 ,Active Status Bit 460" "Not active,Active" bitfld.long 0x00 11. " ASB459 ,Active Status Bit 459" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB458 ,Active Status Bit 458" "Not active,Active" bitfld.long 0x00 9. " ASB457 ,Active Status Bit 457" "Not active,Active" bitfld.long 0x00 8. " ASB456 ,Active Status Bit 456" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB455 ,Active Status Bit 455" "Not active,Active" bitfld.long 0x00 6. " ASB454 ,Active Status Bit 454" "Not active,Active" bitfld.long 0x00 5. " ASB453 ,Active Status Bit 453" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB452 ,Active Status Bit 452" "Not active,Active" bitfld.long 0x00 3. " ASB451 ,Active Status Bit 451" "Not active,Active" bitfld.long 0x00 2. " ASB450 ,Active Status Bit 450" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB449 ,Active Status Bit 449" "Not active,Active" bitfld.long 0x00 0. " ASB448 ,Active Status Bit 448" "Not active,Active" else rgroup.long 0x0338++0x03 line.long 0x0 "GICD_ICDABR14,Active Status Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) rgroup.long 0x033C++0x03 line.long 0x0 "GICD_ICDABR15,Active Status Register 15" bitfld.long 0x00 31. " ASB511 ,Active Status Bit 511" "Not active,Active" bitfld.long 0x00 30. " ASB510 ,Active Status Bit 510" "Not active,Active" bitfld.long 0x00 29. " ASB509 ,Active Status Bit 509" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB508 ,Active Status Bit 508" "Not active,Active" bitfld.long 0x00 27. " ASB507 ,Active Status Bit 507" "Not active,Active" bitfld.long 0x00 26. " ASB506 ,Active Status Bit 506" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB505 ,Active Status Bit 505" "Not active,Active" bitfld.long 0x00 24. " ASB504 ,Active Status Bit 504" "Not active,Active" bitfld.long 0x00 23. " ASB503 ,Active Status Bit 503" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB502 ,Active Status Bit 502" "Not active,Active" bitfld.long 0x00 21. " ASB501 ,Active Status Bit 501" "Not active,Active" bitfld.long 0x00 20. " ASB500 ,Active Status Bit 500" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB499 ,Active Status Bit 499" "Not active,Active" bitfld.long 0x00 18. " ASB498 ,Active Status Bit 498" "Not active,Active" bitfld.long 0x00 17. " ASB497 ,Active Status Bit 497" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB496 ,Active Status Bit 496" "Not active,Active" bitfld.long 0x00 15. " ASB495 ,Active Status Bit 495" "Not active,Active" bitfld.long 0x00 14. " ASB494 ,Active Status Bit 494" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB493 ,Active Status Bit 493" "Not active,Active" bitfld.long 0x00 12. " ASB492 ,Active Status Bit 492" "Not active,Active" bitfld.long 0x00 11. " ASB491 ,Active Status Bit 491" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB490 ,Active Status Bit 490" "Not active,Active" bitfld.long 0x00 9. " ASB489 ,Active Status Bit 489" "Not active,Active" bitfld.long 0x00 8. " ASB488 ,Active Status Bit 488" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB487 ,Active Status Bit 487" "Not active,Active" bitfld.long 0x00 6. " ASB486 ,Active Status Bit 486" "Not active,Active" bitfld.long 0x00 5. " ASB485 ,Active Status Bit 485" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB484 ,Active Status Bit 484" "Not active,Active" bitfld.long 0x00 3. " ASB483 ,Active Status Bit 483" "Not active,Active" bitfld.long 0x00 2. " ASB482 ,Active Status Bit 482" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB481 ,Active Status Bit 481" "Not active,Active" bitfld.long 0x00 0. " ASB480 ,Active Status Bit 480" "Not active,Active" else rgroup.long 0x033C++0x03 line.long 0x0 "GICD_ICDABR15,Active Status Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) rgroup.long 0x0340++0x03 line.long 0x0 "GICD_ICDABR16,Active Status Register 16" bitfld.long 0x00 31. " ASB543 ,Active Status Bit 543" "Not active,Active" bitfld.long 0x00 30. " ASB542 ,Active Status Bit 542" "Not active,Active" bitfld.long 0x00 29. " ASB541 ,Active Status Bit 541" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB540 ,Active Status Bit 540" "Not active,Active" bitfld.long 0x00 27. " ASB539 ,Active Status Bit 539" "Not active,Active" bitfld.long 0x00 26. " ASB538 ,Active Status Bit 538" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB537 ,Active Status Bit 537" "Not active,Active" bitfld.long 0x00 24. " ASB536 ,Active Status Bit 536" "Not active,Active" bitfld.long 0x00 23. " ASB535 ,Active Status Bit 535" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB534 ,Active Status Bit 534" "Not active,Active" bitfld.long 0x00 21. " ASB533 ,Active Status Bit 533" "Not active,Active" bitfld.long 0x00 20. " ASB532 ,Active Status Bit 532" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB531 ,Active Status Bit 531" "Not active,Active" bitfld.long 0x00 18. " ASB530 ,Active Status Bit 530" "Not active,Active" bitfld.long 0x00 17. " ASB529 ,Active Status Bit 529" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB528 ,Active Status Bit 528" "Not active,Active" bitfld.long 0x00 15. " ASB527 ,Active Status Bit 527" "Not active,Active" bitfld.long 0x00 14. " ASB526 ,Active Status Bit 526" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB525 ,Active Status Bit 525" "Not active,Active" bitfld.long 0x00 12. " ASB524 ,Active Status Bit 524" "Not active,Active" bitfld.long 0x00 11. " ASB523 ,Active Status Bit 523" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB522 ,Active Status Bit 522" "Not active,Active" bitfld.long 0x00 9. " ASB521 ,Active Status Bit 521" "Not active,Active" bitfld.long 0x00 8. " ASB520 ,Active Status Bit 520" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB519 ,Active Status Bit 519" "Not active,Active" bitfld.long 0x00 6. " ASB518 ,Active Status Bit 518" "Not active,Active" bitfld.long 0x00 5. " ASB517 ,Active Status Bit 517" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB516 ,Active Status Bit 516" "Not active,Active" bitfld.long 0x00 3. " ASB515 ,Active Status Bit 515" "Not active,Active" bitfld.long 0x00 2. " ASB514 ,Active Status Bit 514" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB513 ,Active Status Bit 513" "Not active,Active" bitfld.long 0x00 0. " ASB512 ,Active Status Bit 512" "Not active,Active" else rgroup.long 0x0340++0x03 line.long 0x0 "GICD_ICDABR16,Active Status Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) rgroup.long 0x0344++0x03 line.long 0x0 "GICD_ICDABR17,Active Status Register 17" bitfld.long 0x00 31. " ASB575 ,Active Status Bit 575" "Not active,Active" bitfld.long 0x00 30. " ASB574 ,Active Status Bit 574" "Not active,Active" bitfld.long 0x00 29. " ASB573 ,Active Status Bit 573" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB572 ,Active Status Bit 572" "Not active,Active" bitfld.long 0x00 27. " ASB571 ,Active Status Bit 571" "Not active,Active" bitfld.long 0x00 26. " ASB570 ,Active Status Bit 570" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB569 ,Active Status Bit 569" "Not active,Active" bitfld.long 0x00 24. " ASB568 ,Active Status Bit 568" "Not active,Active" bitfld.long 0x00 23. " ASB567 ,Active Status Bit 567" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB566 ,Active Status Bit 566" "Not active,Active" bitfld.long 0x00 21. " ASB565 ,Active Status Bit 565" "Not active,Active" bitfld.long 0x00 20. " ASB564 ,Active Status Bit 564" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB563 ,Active Status Bit 563" "Not active,Active" bitfld.long 0x00 18. " ASB562 ,Active Status Bit 562" "Not active,Active" bitfld.long 0x00 17. " ASB561 ,Active Status Bit 561" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB560 ,Active Status Bit 560" "Not active,Active" bitfld.long 0x00 15. " ASB559 ,Active Status Bit 559" "Not active,Active" bitfld.long 0x00 14. " ASB558 ,Active Status Bit 558" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB557 ,Active Status Bit 557" "Not active,Active" bitfld.long 0x00 12. " ASB556 ,Active Status Bit 556" "Not active,Active" bitfld.long 0x00 11. " ASB555 ,Active Status Bit 555" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB554 ,Active Status Bit 554" "Not active,Active" bitfld.long 0x00 9. " ASB553 ,Active Status Bit 553" "Not active,Active" bitfld.long 0x00 8. " ASB552 ,Active Status Bit 552" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB551 ,Active Status Bit 551" "Not active,Active" bitfld.long 0x00 6. " ASB550 ,Active Status Bit 550" "Not active,Active" bitfld.long 0x00 5. " ASB549 ,Active Status Bit 549" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB548 ,Active Status Bit 548" "Not active,Active" bitfld.long 0x00 3. " ASB547 ,Active Status Bit 547" "Not active,Active" bitfld.long 0x00 2. " ASB546 ,Active Status Bit 546" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB545 ,Active Status Bit 545" "Not active,Active" bitfld.long 0x00 0. " ASB544 ,Active Status Bit 544" "Not active,Active" else rgroup.long 0x0344++0x03 line.long 0x0 "GICD_ICDABR17,Active Status Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) rgroup.long 0x0348++0x03 line.long 0x0 "GICD_ICDABR18,Active Status Register 18" bitfld.long 0x00 31. " ASB607 ,Active Status Bit 607" "Not active,Active" bitfld.long 0x00 30. " ASB606 ,Active Status Bit 606" "Not active,Active" bitfld.long 0x00 29. " ASB605 ,Active Status Bit 605" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB604 ,Active Status Bit 604" "Not active,Active" bitfld.long 0x00 27. " ASB603 ,Active Status Bit 603" "Not active,Active" bitfld.long 0x00 26. " ASB602 ,Active Status Bit 602" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB601 ,Active Status Bit 601" "Not active,Active" bitfld.long 0x00 24. " ASB600 ,Active Status Bit 600" "Not active,Active" bitfld.long 0x00 23. " ASB599 ,Active Status Bit 599" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB598 ,Active Status Bit 598" "Not active,Active" bitfld.long 0x00 21. " ASB597 ,Active Status Bit 597" "Not active,Active" bitfld.long 0x00 20. " ASB596 ,Active Status Bit 596" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB595 ,Active Status Bit 595" "Not active,Active" bitfld.long 0x00 18. " ASB594 ,Active Status Bit 594" "Not active,Active" bitfld.long 0x00 17. " ASB593 ,Active Status Bit 593" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB592 ,Active Status Bit 592" "Not active,Active" bitfld.long 0x00 15. " ASB591 ,Active Status Bit 591" "Not active,Active" bitfld.long 0x00 14. " ASB590 ,Active Status Bit 590" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB589 ,Active Status Bit 589" "Not active,Active" bitfld.long 0x00 12. " ASB588 ,Active Status Bit 588" "Not active,Active" bitfld.long 0x00 11. " ASB587 ,Active Status Bit 587" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB586 ,Active Status Bit 586" "Not active,Active" bitfld.long 0x00 9. " ASB585 ,Active Status Bit 585" "Not active,Active" bitfld.long 0x00 8. " ASB584 ,Active Status Bit 584" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB583 ,Active Status Bit 583" "Not active,Active" bitfld.long 0x00 6. " ASB582 ,Active Status Bit 582" "Not active,Active" bitfld.long 0x00 5. " ASB581 ,Active Status Bit 581" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB580 ,Active Status Bit 580" "Not active,Active" bitfld.long 0x00 3. " ASB579 ,Active Status Bit 579" "Not active,Active" bitfld.long 0x00 2. " ASB578 ,Active Status Bit 578" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB577 ,Active Status Bit 577" "Not active,Active" bitfld.long 0x00 0. " ASB576 ,Active Status Bit 576" "Not active,Active" else rgroup.long 0x0348++0x03 line.long 0x0 "GICD_ICDABR18,Active Status Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) rgroup.long 0x034C++0x03 line.long 0x0 "GICD_ICDABR19,Active Status Register 19" bitfld.long 0x00 31. " ASB639 ,Active Status Bit 639" "Not active,Active" bitfld.long 0x00 30. " ASB638 ,Active Status Bit 638" "Not active,Active" bitfld.long 0x00 29. " ASB637 ,Active Status Bit 637" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB636 ,Active Status Bit 636" "Not active,Active" bitfld.long 0x00 27. " ASB635 ,Active Status Bit 635" "Not active,Active" bitfld.long 0x00 26. " ASB634 ,Active Status Bit 634" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB633 ,Active Status Bit 633" "Not active,Active" bitfld.long 0x00 24. " ASB632 ,Active Status Bit 632" "Not active,Active" bitfld.long 0x00 23. " ASB631 ,Active Status Bit 631" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB630 ,Active Status Bit 630" "Not active,Active" bitfld.long 0x00 21. " ASB629 ,Active Status Bit 629" "Not active,Active" bitfld.long 0x00 20. " ASB628 ,Active Status Bit 628" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB627 ,Active Status Bit 627" "Not active,Active" bitfld.long 0x00 18. " ASB626 ,Active Status Bit 626" "Not active,Active" bitfld.long 0x00 17. " ASB625 ,Active Status Bit 625" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB624 ,Active Status Bit 624" "Not active,Active" bitfld.long 0x00 15. " ASB623 ,Active Status Bit 623" "Not active,Active" bitfld.long 0x00 14. " ASB622 ,Active Status Bit 622" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB621 ,Active Status Bit 621" "Not active,Active" bitfld.long 0x00 12. " ASB620 ,Active Status Bit 620" "Not active,Active" bitfld.long 0x00 11. " ASB619 ,Active Status Bit 619" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB618 ,Active Status Bit 618" "Not active,Active" bitfld.long 0x00 9. " ASB617 ,Active Status Bit 617" "Not active,Active" bitfld.long 0x00 8. " ASB616 ,Active Status Bit 616" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB615 ,Active Status Bit 615" "Not active,Active" bitfld.long 0x00 6. " ASB614 ,Active Status Bit 614" "Not active,Active" bitfld.long 0x00 5. " ASB613 ,Active Status Bit 613" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB612 ,Active Status Bit 612" "Not active,Active" bitfld.long 0x00 3. " ASB611 ,Active Status Bit 611" "Not active,Active" bitfld.long 0x00 2. " ASB610 ,Active Status Bit 610" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB609 ,Active Status Bit 609" "Not active,Active" bitfld.long 0x00 0. " ASB608 ,Active Status Bit 608" "Not active,Active" else rgroup.long 0x034C++0x03 line.long 0x0 "GICD_ICDABR19,Active Status Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) rgroup.long 0x0350++0x03 line.long 0x0 "GICD_ICDABR20,Active Status Register 20" bitfld.long 0x00 31. " ASB671 ,Active Status Bit 671" "Not active,Active" bitfld.long 0x00 30. " ASB670 ,Active Status Bit 670" "Not active,Active" bitfld.long 0x00 29. " ASB669 ,Active Status Bit 669" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB668 ,Active Status Bit 668" "Not active,Active" bitfld.long 0x00 27. " ASB667 ,Active Status Bit 667" "Not active,Active" bitfld.long 0x00 26. " ASB666 ,Active Status Bit 666" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB665 ,Active Status Bit 665" "Not active,Active" bitfld.long 0x00 24. " ASB664 ,Active Status Bit 664" "Not active,Active" bitfld.long 0x00 23. " ASB663 ,Active Status Bit 663" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB662 ,Active Status Bit 662" "Not active,Active" bitfld.long 0x00 21. " ASB661 ,Active Status Bit 661" "Not active,Active" bitfld.long 0x00 20. " ASB660 ,Active Status Bit 660" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB659 ,Active Status Bit 659" "Not active,Active" bitfld.long 0x00 18. " ASB658 ,Active Status Bit 658" "Not active,Active" bitfld.long 0x00 17. " ASB657 ,Active Status Bit 657" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB656 ,Active Status Bit 656" "Not active,Active" bitfld.long 0x00 15. " ASB655 ,Active Status Bit 655" "Not active,Active" bitfld.long 0x00 14. " ASB654 ,Active Status Bit 654" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB653 ,Active Status Bit 653" "Not active,Active" bitfld.long 0x00 12. " ASB652 ,Active Status Bit 652" "Not active,Active" bitfld.long 0x00 11. " ASB651 ,Active Status Bit 651" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB650 ,Active Status Bit 650" "Not active,Active" bitfld.long 0x00 9. " ASB649 ,Active Status Bit 649" "Not active,Active" bitfld.long 0x00 8. " ASB648 ,Active Status Bit 648" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB647 ,Active Status Bit 647" "Not active,Active" bitfld.long 0x00 6. " ASB646 ,Active Status Bit 646" "Not active,Active" bitfld.long 0x00 5. " ASB645 ,Active Status Bit 645" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB644 ,Active Status Bit 644" "Not active,Active" bitfld.long 0x00 3. " ASB643 ,Active Status Bit 643" "Not active,Active" bitfld.long 0x00 2. " ASB642 ,Active Status Bit 642" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB641 ,Active Status Bit 641" "Not active,Active" bitfld.long 0x00 0. " ASB640 ,Active Status Bit 640" "Not active,Active" else rgroup.long 0x0350++0x03 line.long 0x0 "GICD_ICDABR20,Active Status Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) rgroup.long 0x0354++0x03 line.long 0x0 "GICD_ICDABR21,Active Status Register 21" bitfld.long 0x00 31. " ASB703 ,Active Status Bit 703" "Not active,Active" bitfld.long 0x00 30. " ASB702 ,Active Status Bit 702" "Not active,Active" bitfld.long 0x00 29. " ASB701 ,Active Status Bit 701" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB700 ,Active Status Bit 700" "Not active,Active" bitfld.long 0x00 27. " ASB699 ,Active Status Bit 699" "Not active,Active" bitfld.long 0x00 26. " ASB698 ,Active Status Bit 698" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB697 ,Active Status Bit 697" "Not active,Active" bitfld.long 0x00 24. " ASB696 ,Active Status Bit 696" "Not active,Active" bitfld.long 0x00 23. " ASB695 ,Active Status Bit 695" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB694 ,Active Status Bit 694" "Not active,Active" bitfld.long 0x00 21. " ASB693 ,Active Status Bit 693" "Not active,Active" bitfld.long 0x00 20. " ASB692 ,Active Status Bit 692" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB691 ,Active Status Bit 691" "Not active,Active" bitfld.long 0x00 18. " ASB690 ,Active Status Bit 690" "Not active,Active" bitfld.long 0x00 17. " ASB689 ,Active Status Bit 689" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB688 ,Active Status Bit 688" "Not active,Active" bitfld.long 0x00 15. " ASB687 ,Active Status Bit 687" "Not active,Active" bitfld.long 0x00 14. " ASB686 ,Active Status Bit 686" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB685 ,Active Status Bit 685" "Not active,Active" bitfld.long 0x00 12. " ASB684 ,Active Status Bit 684" "Not active,Active" bitfld.long 0x00 11. " ASB683 ,Active Status Bit 683" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB682 ,Active Status Bit 682" "Not active,Active" bitfld.long 0x00 9. " ASB681 ,Active Status Bit 681" "Not active,Active" bitfld.long 0x00 8. " ASB680 ,Active Status Bit 680" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB679 ,Active Status Bit 679" "Not active,Active" bitfld.long 0x00 6. " ASB678 ,Active Status Bit 678" "Not active,Active" bitfld.long 0x00 5. " ASB677 ,Active Status Bit 677" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB676 ,Active Status Bit 676" "Not active,Active" bitfld.long 0x00 3. " ASB675 ,Active Status Bit 675" "Not active,Active" bitfld.long 0x00 2. " ASB674 ,Active Status Bit 674" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB673 ,Active Status Bit 673" "Not active,Active" bitfld.long 0x00 0. " ASB672 ,Active Status Bit 672" "Not active,Active" else rgroup.long 0x0354++0x03 line.long 0x0 "GICD_ICDABR21,Active Status Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) rgroup.long 0x0358++0x03 line.long 0x0 "GICD_ICDABR22,Active Status Register 22" bitfld.long 0x00 31. " ASB735 ,Active Status Bit 735" "Not active,Active" bitfld.long 0x00 30. " ASB734 ,Active Status Bit 734" "Not active,Active" bitfld.long 0x00 29. " ASB733 ,Active Status Bit 733" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB732 ,Active Status Bit 732" "Not active,Active" bitfld.long 0x00 27. " ASB731 ,Active Status Bit 731" "Not active,Active" bitfld.long 0x00 26. " ASB730 ,Active Status Bit 730" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB729 ,Active Status Bit 729" "Not active,Active" bitfld.long 0x00 24. " ASB728 ,Active Status Bit 728" "Not active,Active" bitfld.long 0x00 23. " ASB727 ,Active Status Bit 727" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB726 ,Active Status Bit 726" "Not active,Active" bitfld.long 0x00 21. " ASB725 ,Active Status Bit 725" "Not active,Active" bitfld.long 0x00 20. " ASB724 ,Active Status Bit 724" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB723 ,Active Status Bit 723" "Not active,Active" bitfld.long 0x00 18. " ASB722 ,Active Status Bit 722" "Not active,Active" bitfld.long 0x00 17. " ASB721 ,Active Status Bit 721" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB720 ,Active Status Bit 720" "Not active,Active" bitfld.long 0x00 15. " ASB719 ,Active Status Bit 719" "Not active,Active" bitfld.long 0x00 14. " ASB718 ,Active Status Bit 718" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB717 ,Active Status Bit 717" "Not active,Active" bitfld.long 0x00 12. " ASB716 ,Active Status Bit 716" "Not active,Active" bitfld.long 0x00 11. " ASB715 ,Active Status Bit 715" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB714 ,Active Status Bit 714" "Not active,Active" bitfld.long 0x00 9. " ASB713 ,Active Status Bit 713" "Not active,Active" bitfld.long 0x00 8. " ASB712 ,Active Status Bit 712" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB711 ,Active Status Bit 711" "Not active,Active" bitfld.long 0x00 6. " ASB710 ,Active Status Bit 710" "Not active,Active" bitfld.long 0x00 5. " ASB709 ,Active Status Bit 709" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB708 ,Active Status Bit 708" "Not active,Active" bitfld.long 0x00 3. " ASB707 ,Active Status Bit 707" "Not active,Active" bitfld.long 0x00 2. " ASB706 ,Active Status Bit 706" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB705 ,Active Status Bit 705" "Not active,Active" bitfld.long 0x00 0. " ASB704 ,Active Status Bit 704" "Not active,Active" else rgroup.long 0x0358++0x03 line.long 0x0 "GICD_ICDABR22,Active Status Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) rgroup.long 0x035C++0x03 line.long 0x0 "GICD_ICDABR23,Active Status Register 23" bitfld.long 0x00 31. " ASB767 ,Active Status Bit 767" "Not active,Active" bitfld.long 0x00 30. " ASB766 ,Active Status Bit 766" "Not active,Active" bitfld.long 0x00 29. " ASB765 ,Active Status Bit 765" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB764 ,Active Status Bit 764" "Not active,Active" bitfld.long 0x00 27. " ASB763 ,Active Status Bit 763" "Not active,Active" bitfld.long 0x00 26. " ASB762 ,Active Status Bit 762" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB761 ,Active Status Bit 761" "Not active,Active" bitfld.long 0x00 24. " ASB760 ,Active Status Bit 760" "Not active,Active" bitfld.long 0x00 23. " ASB759 ,Active Status Bit 759" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB758 ,Active Status Bit 758" "Not active,Active" bitfld.long 0x00 21. " ASB757 ,Active Status Bit 757" "Not active,Active" bitfld.long 0x00 20. " ASB756 ,Active Status Bit 756" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB755 ,Active Status Bit 755" "Not active,Active" bitfld.long 0x00 18. " ASB754 ,Active Status Bit 754" "Not active,Active" bitfld.long 0x00 17. " ASB753 ,Active Status Bit 753" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB752 ,Active Status Bit 752" "Not active,Active" bitfld.long 0x00 15. " ASB751 ,Active Status Bit 751" "Not active,Active" bitfld.long 0x00 14. " ASB750 ,Active Status Bit 750" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB749 ,Active Status Bit 749" "Not active,Active" bitfld.long 0x00 12. " ASB748 ,Active Status Bit 748" "Not active,Active" bitfld.long 0x00 11. " ASB747 ,Active Status Bit 747" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB746 ,Active Status Bit 746" "Not active,Active" bitfld.long 0x00 9. " ASB745 ,Active Status Bit 745" "Not active,Active" bitfld.long 0x00 8. " ASB744 ,Active Status Bit 744" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB743 ,Active Status Bit 743" "Not active,Active" bitfld.long 0x00 6. " ASB742 ,Active Status Bit 742" "Not active,Active" bitfld.long 0x00 5. " ASB741 ,Active Status Bit 741" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB740 ,Active Status Bit 740" "Not active,Active" bitfld.long 0x00 3. " ASB739 ,Active Status Bit 739" "Not active,Active" bitfld.long 0x00 2. " ASB738 ,Active Status Bit 738" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB737 ,Active Status Bit 737" "Not active,Active" bitfld.long 0x00 0. " ASB736 ,Active Status Bit 736" "Not active,Active" else rgroup.long 0x035C++0x03 line.long 0x0 "GICD_ICDABR23,Active Status Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) rgroup.long 0x0360++0x03 line.long 0x0 "GICD_ICDABR24,Active Status Register 24" bitfld.long 0x00 31. " ASB799 ,Active Status Bit 799" "Not active,Active" bitfld.long 0x00 30. " ASB798 ,Active Status Bit 798" "Not active,Active" bitfld.long 0x00 29. " ASB797 ,Active Status Bit 797" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB796 ,Active Status Bit 796" "Not active,Active" bitfld.long 0x00 27. " ASB795 ,Active Status Bit 795" "Not active,Active" bitfld.long 0x00 26. " ASB794 ,Active Status Bit 794" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB793 ,Active Status Bit 793" "Not active,Active" bitfld.long 0x00 24. " ASB792 ,Active Status Bit 792" "Not active,Active" bitfld.long 0x00 23. " ASB791 ,Active Status Bit 791" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB790 ,Active Status Bit 790" "Not active,Active" bitfld.long 0x00 21. " ASB789 ,Active Status Bit 789" "Not active,Active" bitfld.long 0x00 20. " ASB788 ,Active Status Bit 788" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB787 ,Active Status Bit 787" "Not active,Active" bitfld.long 0x00 18. " ASB786 ,Active Status Bit 786" "Not active,Active" bitfld.long 0x00 17. " ASB785 ,Active Status Bit 785" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB784 ,Active Status Bit 784" "Not active,Active" bitfld.long 0x00 15. " ASB783 ,Active Status Bit 783" "Not active,Active" bitfld.long 0x00 14. " ASB782 ,Active Status Bit 782" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB781 ,Active Status Bit 781" "Not active,Active" bitfld.long 0x00 12. " ASB780 ,Active Status Bit 780" "Not active,Active" bitfld.long 0x00 11. " ASB779 ,Active Status Bit 779" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB778 ,Active Status Bit 778" "Not active,Active" bitfld.long 0x00 9. " ASB777 ,Active Status Bit 777" "Not active,Active" bitfld.long 0x00 8. " ASB776 ,Active Status Bit 776" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB775 ,Active Status Bit 775" "Not active,Active" bitfld.long 0x00 6. " ASB774 ,Active Status Bit 774" "Not active,Active" bitfld.long 0x00 5. " ASB773 ,Active Status Bit 773" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB772 ,Active Status Bit 772" "Not active,Active" bitfld.long 0x00 3. " ASB771 ,Active Status Bit 771" "Not active,Active" bitfld.long 0x00 2. " ASB770 ,Active Status Bit 770" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB769 ,Active Status Bit 769" "Not active,Active" bitfld.long 0x00 0. " ASB768 ,Active Status Bit 768" "Not active,Active" else rgroup.long 0x0360++0x03 line.long 0x0 "GICD_ICDABR24,Active Status Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) rgroup.long 0x0364++0x03 line.long 0x0 "GICD_ICDABR25,Active Status Register 25" bitfld.long 0x00 31. " ASB831 ,Active Status Bit 831" "Not active,Active" bitfld.long 0x00 30. " ASB830 ,Active Status Bit 830" "Not active,Active" bitfld.long 0x00 29. " ASB829 ,Active Status Bit 829" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB828 ,Active Status Bit 828" "Not active,Active" bitfld.long 0x00 27. " ASB827 ,Active Status Bit 827" "Not active,Active" bitfld.long 0x00 26. " ASB826 ,Active Status Bit 826" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB825 ,Active Status Bit 825" "Not active,Active" bitfld.long 0x00 24. " ASB824 ,Active Status Bit 824" "Not active,Active" bitfld.long 0x00 23. " ASB823 ,Active Status Bit 823" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB822 ,Active Status Bit 822" "Not active,Active" bitfld.long 0x00 21. " ASB821 ,Active Status Bit 821" "Not active,Active" bitfld.long 0x00 20. " ASB820 ,Active Status Bit 820" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB819 ,Active Status Bit 819" "Not active,Active" bitfld.long 0x00 18. " ASB818 ,Active Status Bit 818" "Not active,Active" bitfld.long 0x00 17. " ASB817 ,Active Status Bit 817" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB816 ,Active Status Bit 816" "Not active,Active" bitfld.long 0x00 15. " ASB815 ,Active Status Bit 815" "Not active,Active" bitfld.long 0x00 14. " ASB814 ,Active Status Bit 814" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB813 ,Active Status Bit 813" "Not active,Active" bitfld.long 0x00 12. " ASB812 ,Active Status Bit 812" "Not active,Active" bitfld.long 0x00 11. " ASB811 ,Active Status Bit 811" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB810 ,Active Status Bit 810" "Not active,Active" bitfld.long 0x00 9. " ASB809 ,Active Status Bit 809" "Not active,Active" bitfld.long 0x00 8. " ASB808 ,Active Status Bit 808" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB807 ,Active Status Bit 807" "Not active,Active" bitfld.long 0x00 6. " ASB806 ,Active Status Bit 806" "Not active,Active" bitfld.long 0x00 5. " ASB805 ,Active Status Bit 805" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB804 ,Active Status Bit 804" "Not active,Active" bitfld.long 0x00 3. " ASB803 ,Active Status Bit 803" "Not active,Active" bitfld.long 0x00 2. " ASB802 ,Active Status Bit 802" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB801 ,Active Status Bit 801" "Not active,Active" bitfld.long 0x00 0. " ASB800 ,Active Status Bit 800" "Not active,Active" else rgroup.long 0x0364++0x03 line.long 0x0 "GICD_ICDABR25,Active Status Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) rgroup.long 0x0368++0x03 line.long 0x0 "GICD_ICDABR26,Active Status Register 26" bitfld.long 0x00 31. " ASB863 ,Active Status Bit 863" "Not active,Active" bitfld.long 0x00 30. " ASB862 ,Active Status Bit 862" "Not active,Active" bitfld.long 0x00 29. " ASB861 ,Active Status Bit 861" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB860 ,Active Status Bit 860" "Not active,Active" bitfld.long 0x00 27. " ASB859 ,Active Status Bit 859" "Not active,Active" bitfld.long 0x00 26. " ASB858 ,Active Status Bit 858" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB857 ,Active Status Bit 857" "Not active,Active" bitfld.long 0x00 24. " ASB856 ,Active Status Bit 856" "Not active,Active" bitfld.long 0x00 23. " ASB855 ,Active Status Bit 855" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB854 ,Active Status Bit 854" "Not active,Active" bitfld.long 0x00 21. " ASB853 ,Active Status Bit 853" "Not active,Active" bitfld.long 0x00 20. " ASB852 ,Active Status Bit 852" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB851 ,Active Status Bit 851" "Not active,Active" bitfld.long 0x00 18. " ASB850 ,Active Status Bit 850" "Not active,Active" bitfld.long 0x00 17. " ASB849 ,Active Status Bit 849" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB848 ,Active Status Bit 848" "Not active,Active" bitfld.long 0x00 15. " ASB847 ,Active Status Bit 847" "Not active,Active" bitfld.long 0x00 14. " ASB846 ,Active Status Bit 846" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB845 ,Active Status Bit 845" "Not active,Active" bitfld.long 0x00 12. " ASB844 ,Active Status Bit 844" "Not active,Active" bitfld.long 0x00 11. " ASB843 ,Active Status Bit 843" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB842 ,Active Status Bit 842" "Not active,Active" bitfld.long 0x00 9. " ASB841 ,Active Status Bit 841" "Not active,Active" bitfld.long 0x00 8. " ASB840 ,Active Status Bit 840" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB839 ,Active Status Bit 839" "Not active,Active" bitfld.long 0x00 6. " ASB838 ,Active Status Bit 838" "Not active,Active" bitfld.long 0x00 5. " ASB837 ,Active Status Bit 837" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB836 ,Active Status Bit 836" "Not active,Active" bitfld.long 0x00 3. " ASB835 ,Active Status Bit 835" "Not active,Active" bitfld.long 0x00 2. " ASB834 ,Active Status Bit 834" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB833 ,Active Status Bit 833" "Not active,Active" bitfld.long 0x00 0. " ASB832 ,Active Status Bit 832" "Not active,Active" else rgroup.long 0x0368++0x03 line.long 0x0 "GICD_ICDABR26,Active Status Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) rgroup.long 0x036C++0x03 line.long 0x0 "GICD_ICDABR27,Active Status Register 27" bitfld.long 0x00 31. " ASB895 ,Active Status Bit 895" "Not active,Active" bitfld.long 0x00 30. " ASB894 ,Active Status Bit 894" "Not active,Active" bitfld.long 0x00 29. " ASB893 ,Active Status Bit 893" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB892 ,Active Status Bit 892" "Not active,Active" bitfld.long 0x00 27. " ASB891 ,Active Status Bit 891" "Not active,Active" bitfld.long 0x00 26. " ASB890 ,Active Status Bit 890" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB889 ,Active Status Bit 889" "Not active,Active" bitfld.long 0x00 24. " ASB888 ,Active Status Bit 888" "Not active,Active" bitfld.long 0x00 23. " ASB887 ,Active Status Bit 887" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB886 ,Active Status Bit 886" "Not active,Active" bitfld.long 0x00 21. " ASB885 ,Active Status Bit 885" "Not active,Active" bitfld.long 0x00 20. " ASB884 ,Active Status Bit 884" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB883 ,Active Status Bit 883" "Not active,Active" bitfld.long 0x00 18. " ASB882 ,Active Status Bit 882" "Not active,Active" bitfld.long 0x00 17. " ASB881 ,Active Status Bit 881" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB880 ,Active Status Bit 880" "Not active,Active" bitfld.long 0x00 15. " ASB879 ,Active Status Bit 879" "Not active,Active" bitfld.long 0x00 14. " ASB878 ,Active Status Bit 878" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB877 ,Active Status Bit 877" "Not active,Active" bitfld.long 0x00 12. " ASB876 ,Active Status Bit 876" "Not active,Active" bitfld.long 0x00 11. " ASB875 ,Active Status Bit 875" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB874 ,Active Status Bit 874" "Not active,Active" bitfld.long 0x00 9. " ASB873 ,Active Status Bit 873" "Not active,Active" bitfld.long 0x00 8. " ASB872 ,Active Status Bit 872" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB871 ,Active Status Bit 871" "Not active,Active" bitfld.long 0x00 6. " ASB870 ,Active Status Bit 870" "Not active,Active" bitfld.long 0x00 5. " ASB869 ,Active Status Bit 869" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB868 ,Active Status Bit 868" "Not active,Active" bitfld.long 0x00 3. " ASB867 ,Active Status Bit 867" "Not active,Active" bitfld.long 0x00 2. " ASB866 ,Active Status Bit 866" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB865 ,Active Status Bit 865" "Not active,Active" bitfld.long 0x00 0. " ASB864 ,Active Status Bit 864" "Not active,Active" else rgroup.long 0x036C++0x03 line.long 0x0 "GICD_ICDABR27,Active Status Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) rgroup.long 0x0370++0x03 line.long 0x0 "GICD_ICDABR28,Active Status Register 28" bitfld.long 0x00 31. " ASB927 ,Active Status Bit 927" "Not active,Active" bitfld.long 0x00 30. " ASB926 ,Active Status Bit 926" "Not active,Active" bitfld.long 0x00 29. " ASB925 ,Active Status Bit 925" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB924 ,Active Status Bit 924" "Not active,Active" bitfld.long 0x00 27. " ASB923 ,Active Status Bit 923" "Not active,Active" bitfld.long 0x00 26. " ASB922 ,Active Status Bit 922" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB921 ,Active Status Bit 921" "Not active,Active" bitfld.long 0x00 24. " ASB920 ,Active Status Bit 920" "Not active,Active" bitfld.long 0x00 23. " ASB919 ,Active Status Bit 919" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB918 ,Active Status Bit 918" "Not active,Active" bitfld.long 0x00 21. " ASB917 ,Active Status Bit 917" "Not active,Active" bitfld.long 0x00 20. " ASB916 ,Active Status Bit 916" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB915 ,Active Status Bit 915" "Not active,Active" bitfld.long 0x00 18. " ASB914 ,Active Status Bit 914" "Not active,Active" bitfld.long 0x00 17. " ASB913 ,Active Status Bit 913" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB912 ,Active Status Bit 912" "Not active,Active" bitfld.long 0x00 15. " ASB911 ,Active Status Bit 911" "Not active,Active" bitfld.long 0x00 14. " ASB910 ,Active Status Bit 910" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB909 ,Active Status Bit 909" "Not active,Active" bitfld.long 0x00 12. " ASB908 ,Active Status Bit 908" "Not active,Active" bitfld.long 0x00 11. " ASB907 ,Active Status Bit 907" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB906 ,Active Status Bit 906" "Not active,Active" bitfld.long 0x00 9. " ASB905 ,Active Status Bit 905" "Not active,Active" bitfld.long 0x00 8. " ASB904 ,Active Status Bit 904" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB903 ,Active Status Bit 903" "Not active,Active" bitfld.long 0x00 6. " ASB902 ,Active Status Bit 902" "Not active,Active" bitfld.long 0x00 5. " ASB901 ,Active Status Bit 901" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB900 ,Active Status Bit 900" "Not active,Active" bitfld.long 0x00 3. " ASB899 ,Active Status Bit 899" "Not active,Active" bitfld.long 0x00 2. " ASB898 ,Active Status Bit 898" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB897 ,Active Status Bit 897" "Not active,Active" bitfld.long 0x00 0. " ASB896 ,Active Status Bit 896" "Not active,Active" else rgroup.long 0x0370++0x03 line.long 0x0 "GICD_ICDABR28,Active Status Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) rgroup.long 0x0374++0x03 line.long 0x0 "GICD_ICDABR29,Active Status Register 29" bitfld.long 0x00 31. " ASB959 ,Active Status Bit 959" "Not active,Active" bitfld.long 0x00 30. " ASB958 ,Active Status Bit 958" "Not active,Active" bitfld.long 0x00 29. " ASB957 ,Active Status Bit 957" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB956 ,Active Status Bit 956" "Not active,Active" bitfld.long 0x00 27. " ASB955 ,Active Status Bit 955" "Not active,Active" bitfld.long 0x00 26. " ASB954 ,Active Status Bit 954" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB953 ,Active Status Bit 953" "Not active,Active" bitfld.long 0x00 24. " ASB952 ,Active Status Bit 952" "Not active,Active" bitfld.long 0x00 23. " ASB951 ,Active Status Bit 951" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB950 ,Active Status Bit 950" "Not active,Active" bitfld.long 0x00 21. " ASB949 ,Active Status Bit 949" "Not active,Active" bitfld.long 0x00 20. " ASB948 ,Active Status Bit 948" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB947 ,Active Status Bit 947" "Not active,Active" bitfld.long 0x00 18. " ASB946 ,Active Status Bit 946" "Not active,Active" bitfld.long 0x00 17. " ASB945 ,Active Status Bit 945" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB944 ,Active Status Bit 944" "Not active,Active" bitfld.long 0x00 15. " ASB943 ,Active Status Bit 943" "Not active,Active" bitfld.long 0x00 14. " ASB942 ,Active Status Bit 942" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB941 ,Active Status Bit 941" "Not active,Active" bitfld.long 0x00 12. " ASB940 ,Active Status Bit 940" "Not active,Active" bitfld.long 0x00 11. " ASB939 ,Active Status Bit 939" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB938 ,Active Status Bit 938" "Not active,Active" bitfld.long 0x00 9. " ASB937 ,Active Status Bit 937" "Not active,Active" bitfld.long 0x00 8. " ASB936 ,Active Status Bit 936" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB935 ,Active Status Bit 935" "Not active,Active" bitfld.long 0x00 6. " ASB934 ,Active Status Bit 934" "Not active,Active" bitfld.long 0x00 5. " ASB933 ,Active Status Bit 933" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB932 ,Active Status Bit 932" "Not active,Active" bitfld.long 0x00 3. " ASB931 ,Active Status Bit 931" "Not active,Active" bitfld.long 0x00 2. " ASB930 ,Active Status Bit 930" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB929 ,Active Status Bit 929" "Not active,Active" bitfld.long 0x00 0. " ASB928 ,Active Status Bit 928" "Not active,Active" else rgroup.long 0x0374++0x03 line.long 0x0 "GICD_ICDABR29,Active Status Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) rgroup.long 0x0378++0x03 line.long 0x0 "GICD_ICDABR30,Active Status Register 30" bitfld.long 0x00 31. " ASB991 ,Active Status Bit 991" "Not active,Active" bitfld.long 0x00 30. " ASB990 ,Active Status Bit 990" "Not active,Active" bitfld.long 0x00 29. " ASB989 ,Active Status Bit 989" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB988 ,Active Status Bit 988" "Not active,Active" bitfld.long 0x00 27. " ASB987 ,Active Status Bit 987" "Not active,Active" bitfld.long 0x00 26. " ASB986 ,Active Status Bit 986" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB985 ,Active Status Bit 985" "Not active,Active" bitfld.long 0x00 24. " ASB984 ,Active Status Bit 984" "Not active,Active" bitfld.long 0x00 23. " ASB983 ,Active Status Bit 983" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB982 ,Active Status Bit 982" "Not active,Active" bitfld.long 0x00 21. " ASB981 ,Active Status Bit 981" "Not active,Active" bitfld.long 0x00 20. " ASB980 ,Active Status Bit 980" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB979 ,Active Status Bit 979" "Not active,Active" bitfld.long 0x00 18. " ASB978 ,Active Status Bit 978" "Not active,Active" bitfld.long 0x00 17. " ASB977 ,Active Status Bit 977" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB976 ,Active Status Bit 976" "Not active,Active" bitfld.long 0x00 15. " ASB975 ,Active Status Bit 975" "Not active,Active" bitfld.long 0x00 14. " ASB974 ,Active Status Bit 974" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB973 ,Active Status Bit 973" "Not active,Active" bitfld.long 0x00 12. " ASB972 ,Active Status Bit 972" "Not active,Active" bitfld.long 0x00 11. " ASB971 ,Active Status Bit 971" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB970 ,Active Status Bit 970" "Not active,Active" bitfld.long 0x00 9. " ASB969 ,Active Status Bit 969" "Not active,Active" bitfld.long 0x00 8. " ASB968 ,Active Status Bit 968" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB967 ,Active Status Bit 967" "Not active,Active" bitfld.long 0x00 6. " ASB966 ,Active Status Bit 966" "Not active,Active" bitfld.long 0x00 5. " ASB965 ,Active Status Bit 965" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB964 ,Active Status Bit 964" "Not active,Active" bitfld.long 0x00 3. " ASB963 ,Active Status Bit 963" "Not active,Active" bitfld.long 0x00 2. " ASB962 ,Active Status Bit 962" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB961 ,Active Status Bit 961" "Not active,Active" bitfld.long 0x00 0. " ASB960 ,Active Status Bit 960" "Not active,Active" else rgroup.long 0x0378++0x03 line.long 0x0 "GICD_ICDABR30,Active Status Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)==0x1F) rgroup.long 0x037C++0x03 line.long 0x0 "GICD_ICDABR31,Active Status Register 31" bitfld.long 0x00 27. " ASB1019 ,Active Status Bit 1019" "Not active,Active" bitfld.long 0x00 26. " ASB1018 ,Active Status Bit 1018" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB1017 ,Active Status Bit 1017" "Not active,Active" bitfld.long 0x00 24. " ASB1016 ,Active Status Bit 1016" "Not active,Active" bitfld.long 0x00 23. " ASB1015 ,Active Status Bit 1015" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB1014 ,Active Status Bit 1014" "Not active,Active" bitfld.long 0x00 21. " ASB1013 ,Active Status Bit 1013" "Not active,Active" bitfld.long 0x00 20. " ASB1012 ,Active Status Bit 1012" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB1011 ,Active Status Bit 1011" "Not active,Active" bitfld.long 0x00 18. " ASB1010 ,Active Status Bit 1010" "Not active,Active" bitfld.long 0x00 17. " ASB1009 ,Active Status Bit 1009" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB1008 ,Active Status Bit 1008" "Not active,Active" bitfld.long 0x00 15. " ASB1007 ,Active Status Bit 1007" "Not active,Active" bitfld.long 0x00 14. " ASB1006 ,Active Status Bit 1006" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB1005 ,Active Status Bit 1005" "Not active,Active" bitfld.long 0x00 12. " ASB1004 ,Active Status Bit 1004" "Not active,Active" bitfld.long 0x00 11. " ASB1003 ,Active Status Bit 1003" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB1002 ,Active Status Bit 1002" "Not active,Active" bitfld.long 0x00 9. " ASB1001 ,Active Status Bit 1001" "Not active,Active" bitfld.long 0x00 8. " ASB1000 ,Active Status Bit 1000" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB999 ,Active Status Bit 999" "Not active,Active" bitfld.long 0x00 6. " ASB998 ,Active Status Bit 998" "Not active,Active" bitfld.long 0x00 5. " ASB997 ,Active Status Bit 997" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB996 ,Active Status Bit 996" "Not active,Active" bitfld.long 0x00 3. " ASB995 ,Active Status Bit 995" "Not active,Active" bitfld.long 0x00 2. " ASB994 ,Active Status Bit 994" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB993 ,Active Status Bit 993" "Not active,Active" bitfld.long 0x00 0. " ASB992 ,Active Status Bit 992" "Not active,Active" else rgroup.long 0x037C++0x03 line.long 0x0 "GICD_ICDABR31,Active Status Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif else group.long 0x0300++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE31 ,Set/Clear Active Bit 31" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE30 ,Set/Clear Active Bit 30" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE29 ,Set/Clear Active Bit 29" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE28 ,Set/Clear Active Bit 28" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE27 ,Set/Clear Active Bit 27" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE26 ,Set/Clear Active Bit 26" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE25 ,Set/Clear Active Bit 25" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE24 ,Set/Clear Active Bit 24" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE23 ,Set/Clear Active Bit 23" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE22 ,Set/Clear Active Bit 22" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE21 ,Set/Clear Active Bit 21" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE20 ,Set/Clear Active Bit 20" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE19 ,Set/Clear Active Bit 19" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE18 ,Set/Clear Active Bit 18" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE17 ,Set/Clear Active Bit 17" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE16 ,Set/Clear Active Bit 16" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE15 ,Set/Clear Active Bit 15" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE14 ,Set/Clear Active Bit 14" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE13 ,Set/Clear Active Bit 13" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE12 ,Set/Clear Active Bit 12" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE11 ,Set/Clear Active Bit 11" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE10 ,Set/Clear Active Bit 10" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE9 ,Set/Clear Active Bit 9" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE8 ,Set/Clear Active Bit 8" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE7 ,Set/Clear Active Bit 7" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE6 ,Set/Clear Active Bit 6" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE5 ,Set/Clear Active Bit 5" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE4 ,Set/Clear Active Bit 4" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE3 ,Set/Clear Active Bit 3" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE2 ,Set/Clear Active Bit 2" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE1 ,Set/Clear Active Bit 1" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE0 ,Set/Clear Active Bit 0" "Not active,Active" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) group.long 0x0304++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE63 ,Set/Clear Active Bit 63" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE62 ,Set/Clear Active Bit 62" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE61 ,Set/Clear Active Bit 61" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE60 ,Set/Clear Active Bit 60" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE59 ,Set/Clear Active Bit 59" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE58 ,Set/Clear Active Bit 58" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE57 ,Set/Clear Active Bit 57" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE56 ,Set/Clear Active Bit 56" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE55 ,Set/Clear Active Bit 55" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE54 ,Set/Clear Active Bit 54" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE53 ,Set/Clear Active Bit 53" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE52 ,Set/Clear Active Bit 52" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE51 ,Set/Clear Active Bit 51" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE50 ,Set/Clear Active Bit 50" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE49 ,Set/Clear Active Bit 49" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE48 ,Set/Clear Active Bit 48" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE47 ,Set/Clear Active Bit 47" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE46 ,Set/Clear Active Bit 46" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE45 ,Set/Clear Active Bit 45" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE44 ,Set/Clear Active Bit 44" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE43 ,Set/Clear Active Bit 43" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE42 ,Set/Clear Active Bit 42" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE41 ,Set/Clear Active Bit 41" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE40 ,Set/Clear Active Bit 40" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE39 ,Set/Clear Active Bit 39" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE38 ,Set/Clear Active Bit 38" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE37 ,Set/Clear Active Bit 37" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE36 ,Set/Clear Active Bit 36" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE35 ,Set/Clear Active Bit 35" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE34 ,Set/Clear Active Bit 34" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE33 ,Set/Clear Active Bit 33" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE32 ,Set/Clear Active Bit 32" "Not active,Active" else rgroup.long 0x0304++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) group.long 0x0308++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE95 ,Set/Clear Active Bit 95" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE94 ,Set/Clear Active Bit 94" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE93 ,Set/Clear Active Bit 93" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE92 ,Set/Clear Active Bit 92" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE91 ,Set/Clear Active Bit 91" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE90 ,Set/Clear Active Bit 90" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE89 ,Set/Clear Active Bit 89" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE88 ,Set/Clear Active Bit 88" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE87 ,Set/Clear Active Bit 87" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE86 ,Set/Clear Active Bit 86" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE85 ,Set/Clear Active Bit 85" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE84 ,Set/Clear Active Bit 84" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE83 ,Set/Clear Active Bit 83" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE82 ,Set/Clear Active Bit 82" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE81 ,Set/Clear Active Bit 81" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE80 ,Set/Clear Active Bit 80" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE79 ,Set/Clear Active Bit 79" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE78 ,Set/Clear Active Bit 78" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE77 ,Set/Clear Active Bit 77" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE76 ,Set/Clear Active Bit 76" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE75 ,Set/Clear Active Bit 75" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE74 ,Set/Clear Active Bit 74" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE73 ,Set/Clear Active Bit 73" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE72 ,Set/Clear Active Bit 72" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE71 ,Set/Clear Active Bit 71" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE70 ,Set/Clear Active Bit 70" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE69 ,Set/Clear Active Bit 69" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE68 ,Set/Clear Active Bit 68" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE67 ,Set/Clear Active Bit 67" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE66 ,Set/Clear Active Bit 66" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE65 ,Set/Clear Active Bit 65" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE64 ,Set/Clear Active Bit 64" "Not active,Active" else rgroup.long 0x0308++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) group.long 0x030C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE127 ,Set/Clear Active Bit 127" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE126 ,Set/Clear Active Bit 126" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE125 ,Set/Clear Active Bit 125" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE124 ,Set/Clear Active Bit 124" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE123 ,Set/Clear Active Bit 123" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE122 ,Set/Clear Active Bit 122" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE121 ,Set/Clear Active Bit 121" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE120 ,Set/Clear Active Bit 120" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE119 ,Set/Clear Active Bit 119" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE118 ,Set/Clear Active Bit 118" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE117 ,Set/Clear Active Bit 117" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE116 ,Set/Clear Active Bit 116" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE115 ,Set/Clear Active Bit 115" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE114 ,Set/Clear Active Bit 114" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE113 ,Set/Clear Active Bit 113" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE112 ,Set/Clear Active Bit 112" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE111 ,Set/Clear Active Bit 111" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE110 ,Set/Clear Active Bit 110" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE109 ,Set/Clear Active Bit 109" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE108 ,Set/Clear Active Bit 108" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE107 ,Set/Clear Active Bit 107" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE106 ,Set/Clear Active Bit 106" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE105 ,Set/Clear Active Bit 105" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE104 ,Set/Clear Active Bit 104" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE103 ,Set/Clear Active Bit 103" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE102 ,Set/Clear Active Bit 102" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE101 ,Set/Clear Active Bit 101" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE100 ,Set/Clear Active Bit 100" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE99 ,Set/Clear Active Bit 99" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE98 ,Set/Clear Active Bit 98" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE97 ,Set/Clear Active Bit 97" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE96 ,Set/Clear Active Bit 96" "Not active,Active" else rgroup.long 0x030C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) group.long 0x0310++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE159 ,Set/Clear Active Bit 159" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE158 ,Set/Clear Active Bit 158" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE157 ,Set/Clear Active Bit 157" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE156 ,Set/Clear Active Bit 156" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE155 ,Set/Clear Active Bit 155" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE154 ,Set/Clear Active Bit 154" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE153 ,Set/Clear Active Bit 153" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE152 ,Set/Clear Active Bit 152" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE151 ,Set/Clear Active Bit 151" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE150 ,Set/Clear Active Bit 150" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE149 ,Set/Clear Active Bit 149" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE148 ,Set/Clear Active Bit 148" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE147 ,Set/Clear Active Bit 147" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE146 ,Set/Clear Active Bit 146" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE145 ,Set/Clear Active Bit 145" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE144 ,Set/Clear Active Bit 144" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE143 ,Set/Clear Active Bit 143" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE142 ,Set/Clear Active Bit 142" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE141 ,Set/Clear Active Bit 141" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE140 ,Set/Clear Active Bit 140" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE139 ,Set/Clear Active Bit 139" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE138 ,Set/Clear Active Bit 138" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE137 ,Set/Clear Active Bit 137" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE136 ,Set/Clear Active Bit 136" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE135 ,Set/Clear Active Bit 135" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE134 ,Set/Clear Active Bit 134" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE133 ,Set/Clear Active Bit 133" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE132 ,Set/Clear Active Bit 132" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE131 ,Set/Clear Active Bit 131" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE130 ,Set/Clear Active Bit 130" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE129 ,Set/Clear Active Bit 129" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE128 ,Set/Clear Active Bit 128" "Not active,Active" else rgroup.long 0x0310++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) group.long 0x0314++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE191 ,Set/Clear Active Bit 191" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE190 ,Set/Clear Active Bit 190" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE189 ,Set/Clear Active Bit 189" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE188 ,Set/Clear Active Bit 188" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE187 ,Set/Clear Active Bit 187" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE186 ,Set/Clear Active Bit 186" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE185 ,Set/Clear Active Bit 185" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE184 ,Set/Clear Active Bit 184" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE183 ,Set/Clear Active Bit 183" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE182 ,Set/Clear Active Bit 182" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE181 ,Set/Clear Active Bit 181" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE180 ,Set/Clear Active Bit 180" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE179 ,Set/Clear Active Bit 179" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE178 ,Set/Clear Active Bit 178" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE177 ,Set/Clear Active Bit 177" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE176 ,Set/Clear Active Bit 176" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE175 ,Set/Clear Active Bit 175" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE174 ,Set/Clear Active Bit 174" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE173 ,Set/Clear Active Bit 173" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE172 ,Set/Clear Active Bit 172" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE171 ,Set/Clear Active Bit 171" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE170 ,Set/Clear Active Bit 170" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE169 ,Set/Clear Active Bit 169" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE168 ,Set/Clear Active Bit 168" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE167 ,Set/Clear Active Bit 167" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE166 ,Set/Clear Active Bit 166" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE165 ,Set/Clear Active Bit 165" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE164 ,Set/Clear Active Bit 164" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE163 ,Set/Clear Active Bit 163" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE162 ,Set/Clear Active Bit 162" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE161 ,Set/Clear Active Bit 161" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE160 ,Set/Clear Active Bit 160" "Not active,Active" else rgroup.long 0x0314++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) group.long 0x0318++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE223 ,Set/Clear Active Bit 223" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE222 ,Set/Clear Active Bit 222" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE221 ,Set/Clear Active Bit 221" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE220 ,Set/Clear Active Bit 220" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE219 ,Set/Clear Active Bit 219" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE218 ,Set/Clear Active Bit 218" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE217 ,Set/Clear Active Bit 217" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE216 ,Set/Clear Active Bit 216" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE215 ,Set/Clear Active Bit 215" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE214 ,Set/Clear Active Bit 214" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE213 ,Set/Clear Active Bit 213" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE212 ,Set/Clear Active Bit 212" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE211 ,Set/Clear Active Bit 211" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE210 ,Set/Clear Active Bit 210" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE209 ,Set/Clear Active Bit 209" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE208 ,Set/Clear Active Bit 208" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE207 ,Set/Clear Active Bit 207" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE206 ,Set/Clear Active Bit 206" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE205 ,Set/Clear Active Bit 205" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE204 ,Set/Clear Active Bit 204" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE203 ,Set/Clear Active Bit 203" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE202 ,Set/Clear Active Bit 202" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE201 ,Set/Clear Active Bit 201" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE200 ,Set/Clear Active Bit 200" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE199 ,Set/Clear Active Bit 199" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE198 ,Set/Clear Active Bit 198" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE197 ,Set/Clear Active Bit 197" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE196 ,Set/Clear Active Bit 196" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE195 ,Set/Clear Active Bit 195" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE194 ,Set/Clear Active Bit 194" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE193 ,Set/Clear Active Bit 193" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE192 ,Set/Clear Active Bit 192" "Not active,Active" else rgroup.long 0x0318++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) group.long 0x031C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE255 ,Set/Clear Active Bit 255" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE254 ,Set/Clear Active Bit 254" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE253 ,Set/Clear Active Bit 253" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE252 ,Set/Clear Active Bit 252" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE251 ,Set/Clear Active Bit 251" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE250 ,Set/Clear Active Bit 250" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE249 ,Set/Clear Active Bit 249" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE248 ,Set/Clear Active Bit 248" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE247 ,Set/Clear Active Bit 247" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE246 ,Set/Clear Active Bit 246" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE245 ,Set/Clear Active Bit 245" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE244 ,Set/Clear Active Bit 244" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE243 ,Set/Clear Active Bit 243" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE242 ,Set/Clear Active Bit 242" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE241 ,Set/Clear Active Bit 241" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE240 ,Set/Clear Active Bit 240" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE239 ,Set/Clear Active Bit 239" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE238 ,Set/Clear Active Bit 238" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE237 ,Set/Clear Active Bit 237" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE236 ,Set/Clear Active Bit 236" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE235 ,Set/Clear Active Bit 235" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE234 ,Set/Clear Active Bit 234" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE233 ,Set/Clear Active Bit 233" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE232 ,Set/Clear Active Bit 232" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE231 ,Set/Clear Active Bit 231" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE230 ,Set/Clear Active Bit 230" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE229 ,Set/Clear Active Bit 229" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE228 ,Set/Clear Active Bit 228" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE227 ,Set/Clear Active Bit 227" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE226 ,Set/Clear Active Bit 226" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE225 ,Set/Clear Active Bit 225" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE224 ,Set/Clear Active Bit 224" "Not active,Active" else rgroup.long 0x031C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) group.long 0x0320++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE287 ,Set/Clear Active Bit 287" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE286 ,Set/Clear Active Bit 286" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE285 ,Set/Clear Active Bit 285" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE284 ,Set/Clear Active Bit 284" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE283 ,Set/Clear Active Bit 283" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE282 ,Set/Clear Active Bit 282" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE281 ,Set/Clear Active Bit 281" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE280 ,Set/Clear Active Bit 280" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE279 ,Set/Clear Active Bit 279" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE278 ,Set/Clear Active Bit 278" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE277 ,Set/Clear Active Bit 277" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE276 ,Set/Clear Active Bit 276" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE275 ,Set/Clear Active Bit 275" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE274 ,Set/Clear Active Bit 274" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE273 ,Set/Clear Active Bit 273" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE272 ,Set/Clear Active Bit 272" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE271 ,Set/Clear Active Bit 271" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE270 ,Set/Clear Active Bit 270" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE269 ,Set/Clear Active Bit 269" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE268 ,Set/Clear Active Bit 268" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE267 ,Set/Clear Active Bit 267" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE266 ,Set/Clear Active Bit 266" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE265 ,Set/Clear Active Bit 265" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE264 ,Set/Clear Active Bit 264" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE263 ,Set/Clear Active Bit 263" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE262 ,Set/Clear Active Bit 262" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE261 ,Set/Clear Active Bit 261" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE260 ,Set/Clear Active Bit 260" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE259 ,Set/Clear Active Bit 259" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE258 ,Set/Clear Active Bit 258" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE257 ,Set/Clear Active Bit 257" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE256 ,Set/Clear Active Bit 256" "Not active,Active" else rgroup.long 0x0320++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) group.long 0x0324++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE319 ,Set/Clear Active Bit 319" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE318 ,Set/Clear Active Bit 318" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE317 ,Set/Clear Active Bit 317" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE316 ,Set/Clear Active Bit 316" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE315 ,Set/Clear Active Bit 315" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE314 ,Set/Clear Active Bit 314" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE313 ,Set/Clear Active Bit 313" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE312 ,Set/Clear Active Bit 312" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE311 ,Set/Clear Active Bit 311" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE310 ,Set/Clear Active Bit 310" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE309 ,Set/Clear Active Bit 309" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE308 ,Set/Clear Active Bit 308" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE307 ,Set/Clear Active Bit 307" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE306 ,Set/Clear Active Bit 306" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE305 ,Set/Clear Active Bit 305" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE304 ,Set/Clear Active Bit 304" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE303 ,Set/Clear Active Bit 303" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE302 ,Set/Clear Active Bit 302" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE301 ,Set/Clear Active Bit 301" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE300 ,Set/Clear Active Bit 300" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE299 ,Set/Clear Active Bit 299" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE298 ,Set/Clear Active Bit 298" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE297 ,Set/Clear Active Bit 297" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE296 ,Set/Clear Active Bit 296" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE295 ,Set/Clear Active Bit 295" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE294 ,Set/Clear Active Bit 294" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE293 ,Set/Clear Active Bit 293" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE292 ,Set/Clear Active Bit 292" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE291 ,Set/Clear Active Bit 291" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE290 ,Set/Clear Active Bit 290" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE289 ,Set/Clear Active Bit 289" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE288 ,Set/Clear Active Bit 288" "Not active,Active" else rgroup.long 0x0324++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) group.long 0x0328++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE351 ,Set/Clear Active Bit 351" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE350 ,Set/Clear Active Bit 350" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE349 ,Set/Clear Active Bit 349" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE348 ,Set/Clear Active Bit 348" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE347 ,Set/Clear Active Bit 347" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE346 ,Set/Clear Active Bit 346" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE345 ,Set/Clear Active Bit 345" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE344 ,Set/Clear Active Bit 344" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE343 ,Set/Clear Active Bit 343" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE342 ,Set/Clear Active Bit 342" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE341 ,Set/Clear Active Bit 341" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE340 ,Set/Clear Active Bit 340" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE339 ,Set/Clear Active Bit 339" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE338 ,Set/Clear Active Bit 338" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE337 ,Set/Clear Active Bit 337" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE336 ,Set/Clear Active Bit 336" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE335 ,Set/Clear Active Bit 335" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE334 ,Set/Clear Active Bit 334" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE333 ,Set/Clear Active Bit 333" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE332 ,Set/Clear Active Bit 332" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE331 ,Set/Clear Active Bit 331" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE330 ,Set/Clear Active Bit 330" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE329 ,Set/Clear Active Bit 329" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE328 ,Set/Clear Active Bit 328" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE327 ,Set/Clear Active Bit 327" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE326 ,Set/Clear Active Bit 326" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE325 ,Set/Clear Active Bit 325" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE324 ,Set/Clear Active Bit 324" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE323 ,Set/Clear Active Bit 323" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE322 ,Set/Clear Active Bit 322" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE321 ,Set/Clear Active Bit 321" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE320 ,Set/Clear Active Bit 320" "Not active,Active" else rgroup.long 0x0328++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) group.long 0x032C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE383 ,Set/Clear Active Bit 383" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE382 ,Set/Clear Active Bit 382" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE381 ,Set/Clear Active Bit 381" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE380 ,Set/Clear Active Bit 380" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE379 ,Set/Clear Active Bit 379" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE378 ,Set/Clear Active Bit 378" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE377 ,Set/Clear Active Bit 377" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE376 ,Set/Clear Active Bit 376" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE375 ,Set/Clear Active Bit 375" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE374 ,Set/Clear Active Bit 374" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE373 ,Set/Clear Active Bit 373" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE372 ,Set/Clear Active Bit 372" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE371 ,Set/Clear Active Bit 371" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE370 ,Set/Clear Active Bit 370" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE369 ,Set/Clear Active Bit 369" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE368 ,Set/Clear Active Bit 368" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE367 ,Set/Clear Active Bit 367" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE366 ,Set/Clear Active Bit 366" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE365 ,Set/Clear Active Bit 365" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE364 ,Set/Clear Active Bit 364" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE363 ,Set/Clear Active Bit 363" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE362 ,Set/Clear Active Bit 362" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE361 ,Set/Clear Active Bit 361" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE360 ,Set/Clear Active Bit 360" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE359 ,Set/Clear Active Bit 359" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE358 ,Set/Clear Active Bit 358" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE357 ,Set/Clear Active Bit 357" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE356 ,Set/Clear Active Bit 356" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE355 ,Set/Clear Active Bit 355" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE354 ,Set/Clear Active Bit 354" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE353 ,Set/Clear Active Bit 353" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE352 ,Set/Clear Active Bit 352" "Not active,Active" else rgroup.long 0x032C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) group.long 0x0330++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE415 ,Set/Clear Active Bit 415" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE414 ,Set/Clear Active Bit 414" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE413 ,Set/Clear Active Bit 413" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE412 ,Set/Clear Active Bit 412" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE411 ,Set/Clear Active Bit 411" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE410 ,Set/Clear Active Bit 410" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE409 ,Set/Clear Active Bit 409" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE408 ,Set/Clear Active Bit 408" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE407 ,Set/Clear Active Bit 407" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE406 ,Set/Clear Active Bit 406" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE405 ,Set/Clear Active Bit 405" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE404 ,Set/Clear Active Bit 404" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE403 ,Set/Clear Active Bit 403" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE402 ,Set/Clear Active Bit 402" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE401 ,Set/Clear Active Bit 401" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE400 ,Set/Clear Active Bit 400" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE399 ,Set/Clear Active Bit 399" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE398 ,Set/Clear Active Bit 398" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE397 ,Set/Clear Active Bit 397" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE396 ,Set/Clear Active Bit 396" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE395 ,Set/Clear Active Bit 395" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE394 ,Set/Clear Active Bit 394" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE393 ,Set/Clear Active Bit 393" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE392 ,Set/Clear Active Bit 392" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE391 ,Set/Clear Active Bit 391" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE390 ,Set/Clear Active Bit 390" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE389 ,Set/Clear Active Bit 389" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE388 ,Set/Clear Active Bit 388" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE387 ,Set/Clear Active Bit 387" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE386 ,Set/Clear Active Bit 386" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE385 ,Set/Clear Active Bit 385" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE384 ,Set/Clear Active Bit 384" "Not active,Active" else rgroup.long 0x0330++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) group.long 0x0334++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE447 ,Set/Clear Active Bit 447" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE446 ,Set/Clear Active Bit 446" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE445 ,Set/Clear Active Bit 445" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE444 ,Set/Clear Active Bit 444" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE443 ,Set/Clear Active Bit 443" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE442 ,Set/Clear Active Bit 442" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE441 ,Set/Clear Active Bit 441" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE440 ,Set/Clear Active Bit 440" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE439 ,Set/Clear Active Bit 439" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE438 ,Set/Clear Active Bit 438" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE437 ,Set/Clear Active Bit 437" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE436 ,Set/Clear Active Bit 436" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE435 ,Set/Clear Active Bit 435" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE434 ,Set/Clear Active Bit 434" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE433 ,Set/Clear Active Bit 433" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE432 ,Set/Clear Active Bit 432" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE431 ,Set/Clear Active Bit 431" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE430 ,Set/Clear Active Bit 430" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE429 ,Set/Clear Active Bit 429" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE428 ,Set/Clear Active Bit 428" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE427 ,Set/Clear Active Bit 427" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE426 ,Set/Clear Active Bit 426" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE425 ,Set/Clear Active Bit 425" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE424 ,Set/Clear Active Bit 424" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE423 ,Set/Clear Active Bit 423" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE422 ,Set/Clear Active Bit 422" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE421 ,Set/Clear Active Bit 421" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE420 ,Set/Clear Active Bit 420" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE419 ,Set/Clear Active Bit 419" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE418 ,Set/Clear Active Bit 418" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE417 ,Set/Clear Active Bit 417" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE416 ,Set/Clear Active Bit 416" "Not active,Active" else rgroup.long 0x0334++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) group.long 0x0338++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE479 ,Set/Clear Active Bit 479" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE478 ,Set/Clear Active Bit 478" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE477 ,Set/Clear Active Bit 477" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE476 ,Set/Clear Active Bit 476" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE475 ,Set/Clear Active Bit 475" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE474 ,Set/Clear Active Bit 474" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE473 ,Set/Clear Active Bit 473" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE472 ,Set/Clear Active Bit 472" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE471 ,Set/Clear Active Bit 471" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE470 ,Set/Clear Active Bit 470" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE469 ,Set/Clear Active Bit 469" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE468 ,Set/Clear Active Bit 468" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE467 ,Set/Clear Active Bit 467" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE466 ,Set/Clear Active Bit 466" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE465 ,Set/Clear Active Bit 465" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE464 ,Set/Clear Active Bit 464" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE463 ,Set/Clear Active Bit 463" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE462 ,Set/Clear Active Bit 462" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE461 ,Set/Clear Active Bit 461" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE460 ,Set/Clear Active Bit 460" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE459 ,Set/Clear Active Bit 459" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE458 ,Set/Clear Active Bit 458" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE457 ,Set/Clear Active Bit 457" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE456 ,Set/Clear Active Bit 456" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE455 ,Set/Clear Active Bit 455" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE454 ,Set/Clear Active Bit 454" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE453 ,Set/Clear Active Bit 453" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE452 ,Set/Clear Active Bit 452" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE451 ,Set/Clear Active Bit 451" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE450 ,Set/Clear Active Bit 450" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE449 ,Set/Clear Active Bit 449" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE448 ,Set/Clear Active Bit 448" "Not active,Active" else rgroup.long 0x0338++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) group.long 0x033C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE511 ,Set/Clear Active Bit 511" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE510 ,Set/Clear Active Bit 510" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE509 ,Set/Clear Active Bit 509" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE508 ,Set/Clear Active Bit 508" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE507 ,Set/Clear Active Bit 507" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE506 ,Set/Clear Active Bit 506" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE505 ,Set/Clear Active Bit 505" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE504 ,Set/Clear Active Bit 504" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE503 ,Set/Clear Active Bit 503" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE502 ,Set/Clear Active Bit 502" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE501 ,Set/Clear Active Bit 501" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE500 ,Set/Clear Active Bit 500" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE499 ,Set/Clear Active Bit 499" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE498 ,Set/Clear Active Bit 498" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE497 ,Set/Clear Active Bit 497" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE496 ,Set/Clear Active Bit 496" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE495 ,Set/Clear Active Bit 495" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE494 ,Set/Clear Active Bit 494" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE493 ,Set/Clear Active Bit 493" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE492 ,Set/Clear Active Bit 492" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE491 ,Set/Clear Active Bit 491" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE490 ,Set/Clear Active Bit 490" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE489 ,Set/Clear Active Bit 489" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE488 ,Set/Clear Active Bit 488" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE487 ,Set/Clear Active Bit 487" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE486 ,Set/Clear Active Bit 486" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE485 ,Set/Clear Active Bit 485" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE484 ,Set/Clear Active Bit 484" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE483 ,Set/Clear Active Bit 483" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE482 ,Set/Clear Active Bit 482" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE481 ,Set/Clear Active Bit 481" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE480 ,Set/Clear Active Bit 480" "Not active,Active" else rgroup.long 0x033C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif rgroup.long 0x0340++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER16,Interrupt Set/Clear Active Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0344++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER17,Interrupt Set/Clear Active Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0348++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER18,Interrupt Set/Clear Active Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x034C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER19,Interrupt Set/Clear Active Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0350++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER20,Interrupt Set/Clear Active Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0354++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER21,Interrupt Set/Clear Active Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0358++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER22,Interrupt Set/Clear Active Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x035C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER23,Interrupt Set/Clear Active Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0360++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER24,Interrupt Set/Clear Active Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0364++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER25,Interrupt Set/Clear Active Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0368++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER26,Interrupt Set/Clear Active Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x036C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER27,Interrupt Set/Clear Active Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0370++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER28,Interrupt Set/Clear Active Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0374++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER29,Interrupt Set/Clear Active Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x0378++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER30,Interrupt Set/Clear Active Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " rgroup.long 0x037C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER31,Interrupt Set/Clear Active Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end tree "Priority Registers" group.long 0x400++0x03 line.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0" hexmask.long.byte 0x00 24.--31. 1. " INTID3 ,Interrupt ID3 Priority/Priority Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " INTID2 ,Interrupt ID2 Priority/Priority Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " INTID1 ,Interrupt ID1 Priority/Priority Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " INTID0 ,Interrupt ID0 Priority/Priority Byte Offset 0 " group.long 0x404++0x03 line.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1" hexmask.long.byte 0x00 24.--31. 1. " INTID7 ,Interrupt ID7 Priority/Priority Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " INTID6 ,Interrupt ID6 Priority/Priority Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " INTID5 ,Interrupt ID5 Priority/Priority Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " INTID4 ,Interrupt ID4 Priority/Priority Byte Offset 4 " group.long 0x408++0x03 line.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2" hexmask.long.byte 0x00 24.--31. 1. " INTID11 ,Interrupt ID11 Priority/Priority Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " INTID10 ,Interrupt ID10 Priority/Priority Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " INTID9 ,Interrupt ID9 Priority/Priority Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " INTID8 ,Interrupt ID8 Priority/Priority Byte Offset 8 " group.long 0x40C++0x03 line.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3" hexmask.long.byte 0x00 24.--31. 1. " INTID15 ,Interrupt ID15 Priority/Priority Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " INTID14 ,Interrupt ID14 Priority/Priority Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " INTID13 ,Interrupt ID13 Priority/Priority Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " INTID12 ,Interrupt ID12 Priority/Priority Byte Offset 12 " group.long 0x410++0x03 line.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4" hexmask.long.byte 0x00 24.--31. 1. " INTID19 ,Interrupt ID19 Priority/Priority Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " INTID18 ,Interrupt ID18 Priority/Priority Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " INTID17 ,Interrupt ID17 Priority/Priority Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " INTID16 ,Interrupt ID16 Priority/Priority Byte Offset 16 " group.long 0x414++0x03 line.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5" hexmask.long.byte 0x00 24.--31. 1. " INTID23 ,Interrupt ID23 Priority/Priority Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " INTID22 ,Interrupt ID22 Priority/Priority Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " INTID21 ,Interrupt ID21 Priority/Priority Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " INTID20 ,Interrupt ID20 Priority/Priority Byte Offset 20 " group.long 0x418++0x03 line.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6" hexmask.long.byte 0x00 24.--31. 1. " INTID27 ,Interrupt ID27 Priority/Priority Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " INTID26 ,Interrupt ID26 Priority/Priority Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " INTID25 ,Interrupt ID25 Priority/Priority Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " INTID24 ,Interrupt ID24 Priority/Priority Byte Offset 24 " group.long 0x41C++0x03 line.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7" hexmask.long.byte 0x00 24.--31. 1. " INTID31 ,Interrupt ID31 Priority/Priority Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " INTID30 ,Interrupt ID30 Priority/Priority Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " INTID29 ,Interrupt ID29 Priority/Priority Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " INTID28 ,Interrupt ID28 Priority/Priority Byte Offset 28 " if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) group.long 0x420++0x03 line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hexmask.long.byte 0x00 24.--31. 1. " INTID35 ,Interrupt ID35 Priority/Priority Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " INTID34 ,Interrupt ID34 Priority/Priority Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " INTID33 ,Interrupt ID33 Priority/Priority Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " INTID32 ,Interrupt ID32 Priority/Priority Byte Offset 32 " group.long 0x424++0x03 line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hexmask.long.byte 0x00 24.--31. 1. " INTID39 ,Interrupt ID39 Priority/Priority Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " INTID38 ,Interrupt ID38 Priority/Priority Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " INTID37 ,Interrupt ID37 Priority/Priority Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " INTID36 ,Interrupt ID36 Priority/Priority Byte Offset 36 " group.long 0x428++0x03 line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hexmask.long.byte 0x00 24.--31. 1. " INTID43 ,Interrupt ID43 Priority/Priority Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " INTID42 ,Interrupt ID42 Priority/Priority Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " INTID41 ,Interrupt ID41 Priority/Priority Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " INTID40 ,Interrupt ID40 Priority/Priority Byte Offset 40 " group.long 0x42C++0x03 line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hexmask.long.byte 0x00 24.--31. 1. " INTID47 ,Interrupt ID47 Priority/Priority Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " INTID46 ,Interrupt ID46 Priority/Priority Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " INTID45 ,Interrupt ID45 Priority/Priority Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " INTID44 ,Interrupt ID44 Priority/Priority Byte Offset 44 " group.long 0x430++0x03 line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hexmask.long.byte 0x00 24.--31. 1. " INTID51 ,Interrupt ID51 Priority/Priority Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " INTID50 ,Interrupt ID50 Priority/Priority Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " INTID49 ,Interrupt ID49 Priority/Priority Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " INTID48 ,Interrupt ID48 Priority/Priority Byte Offset 48 " group.long 0x434++0x03 line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hexmask.long.byte 0x00 24.--31. 1. " INTID55 ,Interrupt ID55 Priority/Priority Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " INTID54 ,Interrupt ID54 Priority/Priority Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " INTID53 ,Interrupt ID53 Priority/Priority Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " INTID52 ,Interrupt ID52 Priority/Priority Byte Offset 52 " group.long 0x438++0x03 line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hexmask.long.byte 0x00 24.--31. 1. " INTID59 ,Interrupt ID59 Priority/Priority Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " INTID58 ,Interrupt ID58 Priority/Priority Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " INTID57 ,Interrupt ID57 Priority/Priority Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " INTID56 ,Interrupt ID56 Priority/Priority Byte Offset 56 " group.long 0x43C++0x03 line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" hexmask.long.byte 0x00 24.--31. 1. " INTID63 ,Interrupt ID63 Priority/Priority Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " INTID62 ,Interrupt ID62 Priority/Priority Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " INTID61 ,Interrupt ID61 Priority/Priority Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " INTID60 ,Interrupt ID60 Priority/Priority Byte Offset 60 " else rgroup.long 0x420++0x03 line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" rgroup.long 0x424++0x03 line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" rgroup.long 0x428++0x03 line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" rgroup.long 0x42C++0x03 line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" rgroup.long 0x430++0x03 line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" rgroup.long 0x434++0x03 line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" rgroup.long 0x438++0x03 line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" rgroup.long 0x43C++0x03 line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) group.long 0x440++0x03 line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hexmask.long.byte 0x00 24.--31. 1. " INTID67 ,Interrupt ID67 Priority/Priority Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " INTID66 ,Interrupt ID66 Priority/Priority Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " INTID65 ,Interrupt ID65 Priority/Priority Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " INTID64 ,Interrupt ID64 Priority/Priority Byte Offset 64 " group.long 0x444++0x03 line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hexmask.long.byte 0x00 24.--31. 1. " INTID71 ,Interrupt ID71 Priority/Priority Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " INTID70 ,Interrupt ID70 Priority/Priority Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " INTID69 ,Interrupt ID69 Priority/Priority Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " INTID68 ,Interrupt ID68 Priority/Priority Byte Offset 68 " group.long 0x448++0x03 line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hexmask.long.byte 0x00 24.--31. 1. " INTID75 ,Interrupt ID75 Priority/Priority Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " INTID74 ,Interrupt ID74 Priority/Priority Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " INTID73 ,Interrupt ID73 Priority/Priority Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " INTID72 ,Interrupt ID72 Priority/Priority Byte Offset 72 " group.long 0x44C++0x03 line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hexmask.long.byte 0x00 24.--31. 1. " INTID79 ,Interrupt ID79 Priority/Priority Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " INTID78 ,Interrupt ID78 Priority/Priority Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " INTID77 ,Interrupt ID77 Priority/Priority Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " INTID76 ,Interrupt ID76 Priority/Priority Byte Offset 76 " group.long 0x450++0x03 line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hexmask.long.byte 0x00 24.--31. 1. " INTID83 ,Interrupt ID83 Priority/Priority Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " INTID82 ,Interrupt ID82 Priority/Priority Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " INTID81 ,Interrupt ID81 Priority/Priority Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " INTID80 ,Interrupt ID80 Priority/Priority Byte Offset 80 " group.long 0x454++0x03 line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hexmask.long.byte 0x00 24.--31. 1. " INTID87 ,Interrupt ID87 Priority/Priority Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " INTID86 ,Interrupt ID86 Priority/Priority Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " INTID85 ,Interrupt ID85 Priority/Priority Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " INTID84 ,Interrupt ID84 Priority/Priority Byte Offset 84 " group.long 0x458++0x03 line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hexmask.long.byte 0x00 24.--31. 1. " INTID91 ,Interrupt ID91 Priority/Priority Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " INTID90 ,Interrupt ID90 Priority/Priority Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " INTID89 ,Interrupt ID89 Priority/Priority Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " INTID88 ,Interrupt ID88 Priority/Priority Byte Offset 88 " group.long 0x45C++0x03 line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" hexmask.long.byte 0x00 24.--31. 1. " INTID95 ,Interrupt ID95 Priority/Priority Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " INTID94 ,Interrupt ID94 Priority/Priority Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " INTID93 ,Interrupt ID93 Priority/Priority Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " INTID92 ,Interrupt ID92 Priority/Priority Byte Offset 92 " else rgroup.long 0x440++0x03 line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" rgroup.long 0x444++0x03 line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" rgroup.long 0x448++0x03 line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" rgroup.long 0x44C++0x03 line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" rgroup.long 0x450++0x03 line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" rgroup.long 0x454++0x03 line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" rgroup.long 0x458++0x03 line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" rgroup.long 0x45C++0x03 line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) group.long 0x460++0x03 line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hexmask.long.byte 0x00 24.--31. 1. " INTID99 ,Interrupt ID99 Priority/Priority Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " INTID98 ,Interrupt ID98 Priority/Priority Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " INTID97 ,Interrupt ID97 Priority/Priority Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " INTID96 ,Interrupt ID96 Priority/Priority Byte Offset 96 " group.long 0x464++0x03 line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hexmask.long.byte 0x00 24.--31. 1. " INTID103 ,Interrupt ID103 Priority/Priority Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " INTID102 ,Interrupt ID102 Priority/Priority Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " INTID101 ,Interrupt ID101 Priority/Priority Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " INTID100 ,Interrupt ID100 Priority/Priority Byte Offset 100 " group.long 0x468++0x03 line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hexmask.long.byte 0x00 24.--31. 1. " INTID107 ,Interrupt ID107 Priority/Priority Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " INTID106 ,Interrupt ID106 Priority/Priority Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " INTID105 ,Interrupt ID105 Priority/Priority Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " INTID104 ,Interrupt ID104 Priority/Priority Byte Offset 104 " group.long 0x46C++0x03 line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hexmask.long.byte 0x00 24.--31. 1. " INTID111 ,Interrupt ID111 Priority/Priority Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " INTID110 ,Interrupt ID110 Priority/Priority Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " INTID109 ,Interrupt ID109 Priority/Priority Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " INTID108 ,Interrupt ID108 Priority/Priority Byte Offset 108 " group.long 0x470++0x03 line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hexmask.long.byte 0x00 24.--31. 1. " INTID115 ,Interrupt ID115 Priority/Priority Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " INTID114 ,Interrupt ID114 Priority/Priority Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " INTID113 ,Interrupt ID113 Priority/Priority Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " INTID112 ,Interrupt ID112 Priority/Priority Byte Offset 112 " group.long 0x474++0x03 line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hexmask.long.byte 0x00 24.--31. 1. " INTID119 ,Interrupt ID119 Priority/Priority Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " INTID118 ,Interrupt ID118 Priority/Priority Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " INTID117 ,Interrupt ID117 Priority/Priority Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " INTID116 ,Interrupt ID116 Priority/Priority Byte Offset 116 " group.long 0x478++0x03 line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hexmask.long.byte 0x00 24.--31. 1. " INTID123 ,Interrupt ID123 Priority/Priority Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " INTID122 ,Interrupt ID122 Priority/Priority Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " INTID121 ,Interrupt ID121 Priority/Priority Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " INTID120 ,Interrupt ID120 Priority/Priority Byte Offset 120 " group.long 0x47C++0x03 line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" hexmask.long.byte 0x00 24.--31. 1. " INTID127 ,Interrupt ID127 Priority/Priority Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " INTID126 ,Interrupt ID126 Priority/Priority Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " INTID125 ,Interrupt ID125 Priority/Priority Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " INTID124 ,Interrupt ID124 Priority/Priority Byte Offset 124 " else rgroup.long 0x460++0x03 line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" rgroup.long 0x464++0x03 line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" rgroup.long 0x468++0x03 line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" rgroup.long 0x46C++0x03 line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" rgroup.long 0x470++0x03 line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" rgroup.long 0x474++0x03 line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" rgroup.long 0x478++0x03 line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" rgroup.long 0x47C++0x03 line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) group.long 0x480++0x03 line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hexmask.long.byte 0x00 24.--31. 1. " INTID131 ,Interrupt ID131 Priority/Priority Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " INTID130 ,Interrupt ID130 Priority/Priority Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " INTID129 ,Interrupt ID129 Priority/Priority Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " INTID128 ,Interrupt ID128 Priority/Priority Byte Offset 128 " group.long 0x484++0x03 line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hexmask.long.byte 0x00 24.--31. 1. " INTID135 ,Interrupt ID135 Priority/Priority Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " INTID134 ,Interrupt ID134 Priority/Priority Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " INTID133 ,Interrupt ID133 Priority/Priority Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " INTID132 ,Interrupt ID132 Priority/Priority Byte Offset 132 " group.long 0x488++0x03 line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hexmask.long.byte 0x00 24.--31. 1. " INTID139 ,Interrupt ID139 Priority/Priority Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " INTID138 ,Interrupt ID138 Priority/Priority Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " INTID137 ,Interrupt ID137 Priority/Priority Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " INTID136 ,Interrupt ID136 Priority/Priority Byte Offset 136 " group.long 0x48C++0x03 line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hexmask.long.byte 0x00 24.--31. 1. " INTID143 ,Interrupt ID143 Priority/Priority Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " INTID142 ,Interrupt ID142 Priority/Priority Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " INTID141 ,Interrupt ID141 Priority/Priority Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " INTID140 ,Interrupt ID140 Priority/Priority Byte Offset 140 " group.long 0x490++0x03 line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hexmask.long.byte 0x00 24.--31. 1. " INTID147 ,Interrupt ID147 Priority/Priority Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " INTID146 ,Interrupt ID146 Priority/Priority Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " INTID145 ,Interrupt ID145 Priority/Priority Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " INTID144 ,Interrupt ID144 Priority/Priority Byte Offset 144 " group.long 0x494++0x03 line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hexmask.long.byte 0x00 24.--31. 1. " INTID151 ,Interrupt ID151 Priority/Priority Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " INTID150 ,Interrupt ID150 Priority/Priority Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " INTID149 ,Interrupt ID149 Priority/Priority Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " INTID148 ,Interrupt ID148 Priority/Priority Byte Offset 148 " group.long 0x498++0x03 line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hexmask.long.byte 0x00 24.--31. 1. " INTID155 ,Interrupt ID155 Priority/Priority Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " INTID154 ,Interrupt ID154 Priority/Priority Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " INTID153 ,Interrupt ID153 Priority/Priority Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " INTID152 ,Interrupt ID152 Priority/Priority Byte Offset 152 " group.long 0x49C++0x03 line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" hexmask.long.byte 0x00 24.--31. 1. " INTID159 ,Interrupt ID159 Priority/Priority Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " INTID158 ,Interrupt ID158 Priority/Priority Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " INTID157 ,Interrupt ID157 Priority/Priority Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " INTID156 ,Interrupt ID156 Priority/Priority Byte Offset 156 " else rgroup.long 0x480++0x03 line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" rgroup.long 0x484++0x03 line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" rgroup.long 0x488++0x03 line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" rgroup.long 0x48C++0x03 line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" rgroup.long 0x490++0x03 line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" rgroup.long 0x494++0x03 line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" rgroup.long 0x498++0x03 line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" rgroup.long 0x49C++0x03 line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) group.long 0x4A0++0x03 line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hexmask.long.byte 0x00 24.--31. 1. " INTID163 ,Interrupt ID163 Priority/Priority Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " INTID162 ,Interrupt ID162 Priority/Priority Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " INTID161 ,Interrupt ID161 Priority/Priority Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " INTID160 ,Interrupt ID160 Priority/Priority Byte Offset 160 " group.long 0x4A4++0x03 line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hexmask.long.byte 0x00 24.--31. 1. " INTID167 ,Interrupt ID167 Priority/Priority Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " INTID166 ,Interrupt ID166 Priority/Priority Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " INTID165 ,Interrupt ID165 Priority/Priority Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " INTID164 ,Interrupt ID164 Priority/Priority Byte Offset 164 " group.long 0x4A8++0x03 line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hexmask.long.byte 0x00 24.--31. 1. " INTID171 ,Interrupt ID171 Priority/Priority Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " INTID170 ,Interrupt ID170 Priority/Priority Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " INTID169 ,Interrupt ID169 Priority/Priority Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " INTID168 ,Interrupt ID168 Priority/Priority Byte Offset 168 " group.long 0x4AC++0x03 line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hexmask.long.byte 0x00 24.--31. 1. " INTID175 ,Interrupt ID175 Priority/Priority Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " INTID174 ,Interrupt ID174 Priority/Priority Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " INTID173 ,Interrupt ID173 Priority/Priority Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " INTID172 ,Interrupt ID172 Priority/Priority Byte Offset 172 " group.long 0x4B0++0x03 line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hexmask.long.byte 0x00 24.--31. 1. " INTID179 ,Interrupt ID179 Priority/Priority Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " INTID178 ,Interrupt ID178 Priority/Priority Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " INTID177 ,Interrupt ID177 Priority/Priority Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " INTID176 ,Interrupt ID176 Priority/Priority Byte Offset 176 " group.long 0x4B4++0x03 line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hexmask.long.byte 0x00 24.--31. 1. " INTID183 ,Interrupt ID183 Priority/Priority Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " INTID182 ,Interrupt ID182 Priority/Priority Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " INTID181 ,Interrupt ID181 Priority/Priority Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " INTID180 ,Interrupt ID180 Priority/Priority Byte Offset 180 " group.long 0x4B8++0x03 line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hexmask.long.byte 0x00 24.--31. 1. " INTID187 ,Interrupt ID187 Priority/Priority Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " INTID186 ,Interrupt ID186 Priority/Priority Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " INTID185 ,Interrupt ID185 Priority/Priority Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " INTID184 ,Interrupt ID184 Priority/Priority Byte Offset 184 " group.long 0x4BC++0x03 line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" hexmask.long.byte 0x00 24.--31. 1. " INTID191 ,Interrupt ID191 Priority/Priority Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " INTID190 ,Interrupt ID190 Priority/Priority Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " INTID189 ,Interrupt ID189 Priority/Priority Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " INTID188 ,Interrupt ID188 Priority/Priority Byte Offset 188 " else rgroup.long 0x4A0++0x03 line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" rgroup.long 0x4A4++0x03 line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" rgroup.long 0x4A8++0x03 line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" rgroup.long 0x4AC++0x03 line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" rgroup.long 0x4B0++0x03 line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" rgroup.long 0x4B4++0x03 line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" rgroup.long 0x4B8++0x03 line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" rgroup.long 0x4BC++0x03 line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) group.long 0x4C0++0x03 line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hexmask.long.byte 0x00 24.--31. 1. " INTID195 ,Interrupt ID195 Priority/Priority Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " INTID194 ,Interrupt ID194 Priority/Priority Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " INTID193 ,Interrupt ID193 Priority/Priority Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " INTID192 ,Interrupt ID192 Priority/Priority Byte Offset 192 " group.long 0x4C4++0x03 line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hexmask.long.byte 0x00 24.--31. 1. " INTID199 ,Interrupt ID199 Priority/Priority Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " INTID198 ,Interrupt ID198 Priority/Priority Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " INTID197 ,Interrupt ID197 Priority/Priority Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " INTID196 ,Interrupt ID196 Priority/Priority Byte Offset 196 " group.long 0x4C8++0x03 line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hexmask.long.byte 0x00 24.--31. 1. " INTID203 ,Interrupt ID203 Priority/Priority Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " INTID202 ,Interrupt ID202 Priority/Priority Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " INTID201 ,Interrupt ID201 Priority/Priority Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " INTID200 ,Interrupt ID200 Priority/Priority Byte Offset 200 " group.long 0x4CC++0x03 line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hexmask.long.byte 0x00 24.--31. 1. " INTID207 ,Interrupt ID207 Priority/Priority Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " INTID206 ,Interrupt ID206 Priority/Priority Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " INTID205 ,Interrupt ID205 Priority/Priority Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " INTID204 ,Interrupt ID204 Priority/Priority Byte Offset 204 " group.long 0x4D0++0x03 line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hexmask.long.byte 0x00 24.--31. 1. " INTID211 ,Interrupt ID211 Priority/Priority Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " INTID210 ,Interrupt ID210 Priority/Priority Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " INTID209 ,Interrupt ID209 Priority/Priority Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " INTID208 ,Interrupt ID208 Priority/Priority Byte Offset 208 " group.long 0x4D4++0x03 line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hexmask.long.byte 0x00 24.--31. 1. " INTID215 ,Interrupt ID215 Priority/Priority Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " INTID214 ,Interrupt ID214 Priority/Priority Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " INTID213 ,Interrupt ID213 Priority/Priority Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " INTID212 ,Interrupt ID212 Priority/Priority Byte Offset 212 " group.long 0x4D8++0x03 line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hexmask.long.byte 0x00 24.--31. 1. " INTID219 ,Interrupt ID219 Priority/Priority Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " INTID218 ,Interrupt ID218 Priority/Priority Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " INTID217 ,Interrupt ID217 Priority/Priority Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " INTID216 ,Interrupt ID216 Priority/Priority Byte Offset 216 " group.long 0x4DC++0x03 line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" hexmask.long.byte 0x00 24.--31. 1. " INTID223 ,Interrupt ID223 Priority/Priority Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " INTID222 ,Interrupt ID222 Priority/Priority Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " INTID221 ,Interrupt ID221 Priority/Priority Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " INTID220 ,Interrupt ID220 Priority/Priority Byte Offset 220 " else rgroup.long 0x4C0++0x03 line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" rgroup.long 0x4C4++0x03 line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" rgroup.long 0x4C8++0x03 line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" rgroup.long 0x4CC++0x03 line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" rgroup.long 0x4D0++0x03 line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" rgroup.long 0x4D4++0x03 line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" rgroup.long 0x4D8++0x03 line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" rgroup.long 0x4DC++0x03 line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) group.long 0x4E0++0x03 line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hexmask.long.byte 0x00 24.--31. 1. " INTID227 ,Interrupt ID227 Priority/Priority Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " INTID226 ,Interrupt ID226 Priority/Priority Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " INTID225 ,Interrupt ID225 Priority/Priority Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " INTID224 ,Interrupt ID224 Priority/Priority Byte Offset 224 " group.long 0x4E4++0x03 line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hexmask.long.byte 0x00 24.--31. 1. " INTID231 ,Interrupt ID231 Priority/Priority Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " INTID230 ,Interrupt ID230 Priority/Priority Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " INTID229 ,Interrupt ID229 Priority/Priority Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " INTID228 ,Interrupt ID228 Priority/Priority Byte Offset 228 " group.long 0x4E8++0x03 line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hexmask.long.byte 0x00 24.--31. 1. " INTID235 ,Interrupt ID235 Priority/Priority Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " INTID234 ,Interrupt ID234 Priority/Priority Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " INTID233 ,Interrupt ID233 Priority/Priority Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " INTID232 ,Interrupt ID232 Priority/Priority Byte Offset 232 " group.long 0x4EC++0x03 line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hexmask.long.byte 0x00 24.--31. 1. " INTID239 ,Interrupt ID239 Priority/Priority Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " INTID238 ,Interrupt ID238 Priority/Priority Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " INTID237 ,Interrupt ID237 Priority/Priority Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " INTID236 ,Interrupt ID236 Priority/Priority Byte Offset 236 " group.long 0x4F0++0x03 line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hexmask.long.byte 0x00 24.--31. 1. " INTID243 ,Interrupt ID243 Priority/Priority Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " INTID242 ,Interrupt ID242 Priority/Priority Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " INTID241 ,Interrupt ID241 Priority/Priority Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " INTID240 ,Interrupt ID240 Priority/Priority Byte Offset 240 " group.long 0x4F4++0x03 line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hexmask.long.byte 0x00 24.--31. 1. " INTID247 ,Interrupt ID247 Priority/Priority Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " INTID246 ,Interrupt ID246 Priority/Priority Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " INTID245 ,Interrupt ID245 Priority/Priority Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " INTID244 ,Interrupt ID244 Priority/Priority Byte Offset 244 " group.long 0x4F8++0x03 line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hexmask.long.byte 0x00 24.--31. 1. " INTID251 ,Interrupt ID251 Priority/Priority Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " INTID250 ,Interrupt ID250 Priority/Priority Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " INTID249 ,Interrupt ID249 Priority/Priority Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " INTID248 ,Interrupt ID248 Priority/Priority Byte Offset 248 " group.long 0x4FC++0x03 line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" hexmask.long.byte 0x00 24.--31. 1. " INTID255 ,Interrupt ID255 Priority/Priority Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " INTID254 ,Interrupt ID254 Priority/Priority Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " INTID253 ,Interrupt ID253 Priority/Priority Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " INTID252 ,Interrupt ID252 Priority/Priority Byte Offset 252 " else rgroup.long 0x4E0++0x03 line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" rgroup.long 0x4E4++0x03 line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" rgroup.long 0x4E8++0x03 line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" rgroup.long 0x4EC++0x03 line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" rgroup.long 0x4F0++0x03 line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" rgroup.long 0x4F4++0x03 line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" rgroup.long 0x4F8++0x03 line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" rgroup.long 0x4FC++0x03 line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) group.long 0x500++0x03 line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hexmask.long.byte 0x00 24.--31. 1. " INTID259 ,Interrupt ID259 Priority/Priority Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " INTID258 ,Interrupt ID258 Priority/Priority Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " INTID257 ,Interrupt ID257 Priority/Priority Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " INTID256 ,Interrupt ID256 Priority/Priority Byte Offset 256 " group.long 0x504++0x03 line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hexmask.long.byte 0x00 24.--31. 1. " INTID263 ,Interrupt ID263 Priority/Priority Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " INTID262 ,Interrupt ID262 Priority/Priority Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " INTID261 ,Interrupt ID261 Priority/Priority Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " INTID260 ,Interrupt ID260 Priority/Priority Byte Offset 260 " group.long 0x508++0x03 line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hexmask.long.byte 0x00 24.--31. 1. " INTID267 ,Interrupt ID267 Priority/Priority Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " INTID266 ,Interrupt ID266 Priority/Priority Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " INTID265 ,Interrupt ID265 Priority/Priority Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " INTID264 ,Interrupt ID264 Priority/Priority Byte Offset 264 " group.long 0x50C++0x03 line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hexmask.long.byte 0x00 24.--31. 1. " INTID271 ,Interrupt ID271 Priority/Priority Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " INTID270 ,Interrupt ID270 Priority/Priority Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " INTID269 ,Interrupt ID269 Priority/Priority Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " INTID268 ,Interrupt ID268 Priority/Priority Byte Offset 268 " group.long 0x510++0x03 line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hexmask.long.byte 0x00 24.--31. 1. " INTID275 ,Interrupt ID275 Priority/Priority Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " INTID274 ,Interrupt ID274 Priority/Priority Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " INTID273 ,Interrupt ID273 Priority/Priority Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " INTID272 ,Interrupt ID272 Priority/Priority Byte Offset 272 " group.long 0x514++0x03 line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hexmask.long.byte 0x00 24.--31. 1. " INTID279 ,Interrupt ID279 Priority/Priority Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " INTID278 ,Interrupt ID278 Priority/Priority Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " INTID277 ,Interrupt ID277 Priority/Priority Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " INTID276 ,Interrupt ID276 Priority/Priority Byte Offset 276 " group.long 0x518++0x03 line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hexmask.long.byte 0x00 24.--31. 1. " INTID283 ,Interrupt ID283 Priority/Priority Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " INTID282 ,Interrupt ID282 Priority/Priority Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " INTID281 ,Interrupt ID281 Priority/Priority Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " INTID280 ,Interrupt ID280 Priority/Priority Byte Offset 280 " group.long 0x51C++0x03 line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" hexmask.long.byte 0x00 24.--31. 1. " INTID287 ,Interrupt ID287 Priority/Priority Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " INTID286 ,Interrupt ID286 Priority/Priority Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " INTID285 ,Interrupt ID285 Priority/Priority Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " INTID284 ,Interrupt ID284 Priority/Priority Byte Offset 284 " else rgroup.long 0x500++0x03 line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" rgroup.long 0x504++0x03 line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" rgroup.long 0x508++0x03 line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" rgroup.long 0x50C++0x03 line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" rgroup.long 0x510++0x03 line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" rgroup.long 0x514++0x03 line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" rgroup.long 0x518++0x03 line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" rgroup.long 0x51C++0x03 line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) group.long 0x520++0x03 line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hexmask.long.byte 0x00 24.--31. 1. " INTID291 ,Interrupt ID291 Priority/Priority Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " INTID290 ,Interrupt ID290 Priority/Priority Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " INTID289 ,Interrupt ID289 Priority/Priority Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " INTID288 ,Interrupt ID288 Priority/Priority Byte Offset 288 " group.long 0x524++0x03 line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hexmask.long.byte 0x00 24.--31. 1. " INTID295 ,Interrupt ID295 Priority/Priority Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " INTID294 ,Interrupt ID294 Priority/Priority Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " INTID293 ,Interrupt ID293 Priority/Priority Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " INTID292 ,Interrupt ID292 Priority/Priority Byte Offset 292 " group.long 0x528++0x03 line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hexmask.long.byte 0x00 24.--31. 1. " INTID299 ,Interrupt ID299 Priority/Priority Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " INTID298 ,Interrupt ID298 Priority/Priority Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " INTID297 ,Interrupt ID297 Priority/Priority Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " INTID296 ,Interrupt ID296 Priority/Priority Byte Offset 296 " group.long 0x52C++0x03 line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hexmask.long.byte 0x00 24.--31. 1. " INTID303 ,Interrupt ID303 Priority/Priority Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " INTID302 ,Interrupt ID302 Priority/Priority Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " INTID301 ,Interrupt ID301 Priority/Priority Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " INTID300 ,Interrupt ID300 Priority/Priority Byte Offset 300 " group.long 0x530++0x03 line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hexmask.long.byte 0x00 24.--31. 1. " INTID307 ,Interrupt ID307 Priority/Priority Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " INTID306 ,Interrupt ID306 Priority/Priority Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " INTID305 ,Interrupt ID305 Priority/Priority Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " INTID304 ,Interrupt ID304 Priority/Priority Byte Offset 304 " group.long 0x534++0x03 line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hexmask.long.byte 0x00 24.--31. 1. " INTID311 ,Interrupt ID311 Priority/Priority Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " INTID310 ,Interrupt ID310 Priority/Priority Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " INTID309 ,Interrupt ID309 Priority/Priority Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " INTID308 ,Interrupt ID308 Priority/Priority Byte Offset 308 " group.long 0x538++0x03 line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hexmask.long.byte 0x00 24.--31. 1. " INTID315 ,Interrupt ID315 Priority/Priority Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " INTID314 ,Interrupt ID314 Priority/Priority Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " INTID313 ,Interrupt ID313 Priority/Priority Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " INTID312 ,Interrupt ID312 Priority/Priority Byte Offset 312 " group.long 0x53C++0x03 line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" hexmask.long.byte 0x00 24.--31. 1. " INTID319 ,Interrupt ID319 Priority/Priority Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " INTID318 ,Interrupt ID318 Priority/Priority Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " INTID317 ,Interrupt ID317 Priority/Priority Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " INTID316 ,Interrupt ID316 Priority/Priority Byte Offset 316 " else rgroup.long 0x520++0x03 line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" rgroup.long 0x524++0x03 line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" rgroup.long 0x528++0x03 line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" rgroup.long 0x52C++0x03 line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" rgroup.long 0x530++0x03 line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" rgroup.long 0x534++0x03 line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" rgroup.long 0x538++0x03 line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" rgroup.long 0x53C++0x03 line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) group.long 0x540++0x03 line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hexmask.long.byte 0x00 24.--31. 1. " INTID323 ,Interrupt ID323 Priority/Priority Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " INTID322 ,Interrupt ID322 Priority/Priority Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " INTID321 ,Interrupt ID321 Priority/Priority Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " INTID320 ,Interrupt ID320 Priority/Priority Byte Offset 320 " group.long 0x544++0x03 line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hexmask.long.byte 0x00 24.--31. 1. " INTID327 ,Interrupt ID327 Priority/Priority Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " INTID326 ,Interrupt ID326 Priority/Priority Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " INTID325 ,Interrupt ID325 Priority/Priority Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " INTID324 ,Interrupt ID324 Priority/Priority Byte Offset 324 " group.long 0x548++0x03 line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hexmask.long.byte 0x00 24.--31. 1. " INTID331 ,Interrupt ID331 Priority/Priority Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " INTID330 ,Interrupt ID330 Priority/Priority Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " INTID329 ,Interrupt ID329 Priority/Priority Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " INTID328 ,Interrupt ID328 Priority/Priority Byte Offset 328 " group.long 0x54C++0x03 line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hexmask.long.byte 0x00 24.--31. 1. " INTID335 ,Interrupt ID335 Priority/Priority Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " INTID334 ,Interrupt ID334 Priority/Priority Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " INTID333 ,Interrupt ID333 Priority/Priority Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " INTID332 ,Interrupt ID332 Priority/Priority Byte Offset 332 " group.long 0x550++0x03 line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hexmask.long.byte 0x00 24.--31. 1. " INTID339 ,Interrupt ID339 Priority/Priority Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " INTID338 ,Interrupt ID338 Priority/Priority Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " INTID337 ,Interrupt ID337 Priority/Priority Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " INTID336 ,Interrupt ID336 Priority/Priority Byte Offset 336 " group.long 0x554++0x03 line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hexmask.long.byte 0x00 24.--31. 1. " INTID343 ,Interrupt ID343 Priority/Priority Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " INTID342 ,Interrupt ID342 Priority/Priority Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " INTID341 ,Interrupt ID341 Priority/Priority Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " INTID340 ,Interrupt ID340 Priority/Priority Byte Offset 340 " group.long 0x558++0x03 line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hexmask.long.byte 0x00 24.--31. 1. " INTID347 ,Interrupt ID347 Priority/Priority Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " INTID346 ,Interrupt ID346 Priority/Priority Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " INTID345 ,Interrupt ID345 Priority/Priority Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " INTID344 ,Interrupt ID344 Priority/Priority Byte Offset 344 " group.long 0x55C++0x03 line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" hexmask.long.byte 0x00 24.--31. 1. " INTID351 ,Interrupt ID351 Priority/Priority Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " INTID350 ,Interrupt ID350 Priority/Priority Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " INTID349 ,Interrupt ID349 Priority/Priority Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " INTID348 ,Interrupt ID348 Priority/Priority Byte Offset 348 " else rgroup.long 0x540++0x03 line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" rgroup.long 0x544++0x03 line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" rgroup.long 0x548++0x03 line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" rgroup.long 0x54C++0x03 line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" rgroup.long 0x550++0x03 line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" rgroup.long 0x554++0x03 line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" rgroup.long 0x558++0x03 line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" rgroup.long 0x55C++0x03 line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) group.long 0x560++0x03 line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hexmask.long.byte 0x00 24.--31. 1. " INTID355 ,Interrupt ID355 Priority/Priority Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " INTID354 ,Interrupt ID354 Priority/Priority Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " INTID353 ,Interrupt ID353 Priority/Priority Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " INTID352 ,Interrupt ID352 Priority/Priority Byte Offset 352 " group.long 0x564++0x03 line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hexmask.long.byte 0x00 24.--31. 1. " INTID359 ,Interrupt ID359 Priority/Priority Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " INTID358 ,Interrupt ID358 Priority/Priority Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " INTID357 ,Interrupt ID357 Priority/Priority Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " INTID356 ,Interrupt ID356 Priority/Priority Byte Offset 356 " group.long 0x568++0x03 line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hexmask.long.byte 0x00 24.--31. 1. " INTID363 ,Interrupt ID363 Priority/Priority Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " INTID362 ,Interrupt ID362 Priority/Priority Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " INTID361 ,Interrupt ID361 Priority/Priority Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " INTID360 ,Interrupt ID360 Priority/Priority Byte Offset 360 " group.long 0x56C++0x03 line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hexmask.long.byte 0x00 24.--31. 1. " INTID367 ,Interrupt ID367 Priority/Priority Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " INTID366 ,Interrupt ID366 Priority/Priority Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " INTID365 ,Interrupt ID365 Priority/Priority Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " INTID364 ,Interrupt ID364 Priority/Priority Byte Offset 364 " group.long 0x570++0x03 line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hexmask.long.byte 0x00 24.--31. 1. " INTID371 ,Interrupt ID371 Priority/Priority Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " INTID370 ,Interrupt ID370 Priority/Priority Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " INTID369 ,Interrupt ID369 Priority/Priority Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " INTID368 ,Interrupt ID368 Priority/Priority Byte Offset 368 " group.long 0x574++0x03 line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hexmask.long.byte 0x00 24.--31. 1. " INTID375 ,Interrupt ID375 Priority/Priority Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " INTID374 ,Interrupt ID374 Priority/Priority Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " INTID373 ,Interrupt ID373 Priority/Priority Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " INTID372 ,Interrupt ID372 Priority/Priority Byte Offset 372 " group.long 0x578++0x03 line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hexmask.long.byte 0x00 24.--31. 1. " INTID379 ,Interrupt ID379 Priority/Priority Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " INTID378 ,Interrupt ID378 Priority/Priority Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " INTID377 ,Interrupt ID377 Priority/Priority Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " INTID376 ,Interrupt ID376 Priority/Priority Byte Offset 376 " group.long 0x57C++0x03 line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" hexmask.long.byte 0x00 24.--31. 1. " INTID383 ,Interrupt ID383 Priority/Priority Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " INTID382 ,Interrupt ID382 Priority/Priority Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " INTID381 ,Interrupt ID381 Priority/Priority Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " INTID380 ,Interrupt ID380 Priority/Priority Byte Offset 380 " else rgroup.long 0x560++0x03 line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" rgroup.long 0x564++0x03 line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" rgroup.long 0x568++0x03 line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" rgroup.long 0x56C++0x03 line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" rgroup.long 0x570++0x03 line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" rgroup.long 0x574++0x03 line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" rgroup.long 0x578++0x03 line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" rgroup.long 0x57C++0x03 line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) group.long 0x580++0x03 line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hexmask.long.byte 0x00 24.--31. 1. " INTID387 ,Interrupt ID387 Priority/Priority Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " INTID386 ,Interrupt ID386 Priority/Priority Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " INTID385 ,Interrupt ID385 Priority/Priority Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " INTID384 ,Interrupt ID384 Priority/Priority Byte Offset 384 " group.long 0x584++0x03 line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hexmask.long.byte 0x00 24.--31. 1. " INTID391 ,Interrupt ID391 Priority/Priority Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " INTID390 ,Interrupt ID390 Priority/Priority Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " INTID389 ,Interrupt ID389 Priority/Priority Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " INTID388 ,Interrupt ID388 Priority/Priority Byte Offset 388 " group.long 0x588++0x03 line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hexmask.long.byte 0x00 24.--31. 1. " INTID395 ,Interrupt ID395 Priority/Priority Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " INTID394 ,Interrupt ID394 Priority/Priority Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " INTID393 ,Interrupt ID393 Priority/Priority Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " INTID392 ,Interrupt ID392 Priority/Priority Byte Offset 392 " group.long 0x58C++0x03 line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hexmask.long.byte 0x00 24.--31. 1. " INTID399 ,Interrupt ID399 Priority/Priority Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " INTID398 ,Interrupt ID398 Priority/Priority Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " INTID397 ,Interrupt ID397 Priority/Priority Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " INTID396 ,Interrupt ID396 Priority/Priority Byte Offset 396 " group.long 0x590++0x03 line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hexmask.long.byte 0x00 24.--31. 1. " INTID403 ,Interrupt ID403 Priority/Priority Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " INTID402 ,Interrupt ID402 Priority/Priority Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " INTID401 ,Interrupt ID401 Priority/Priority Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " INTID400 ,Interrupt ID400 Priority/Priority Byte Offset 400 " group.long 0x594++0x03 line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hexmask.long.byte 0x00 24.--31. 1. " INTID407 ,Interrupt ID407 Priority/Priority Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " INTID406 ,Interrupt ID406 Priority/Priority Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " INTID405 ,Interrupt ID405 Priority/Priority Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " INTID404 ,Interrupt ID404 Priority/Priority Byte Offset 404 " group.long 0x598++0x03 line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hexmask.long.byte 0x00 24.--31. 1. " INTID411 ,Interrupt ID411 Priority/Priority Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " INTID410 ,Interrupt ID410 Priority/Priority Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " INTID409 ,Interrupt ID409 Priority/Priority Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " INTID408 ,Interrupt ID408 Priority/Priority Byte Offset 408 " group.long 0x59C++0x03 line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" hexmask.long.byte 0x00 24.--31. 1. " INTID415 ,Interrupt ID415 Priority/Priority Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " INTID414 ,Interrupt ID414 Priority/Priority Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " INTID413 ,Interrupt ID413 Priority/Priority Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " INTID412 ,Interrupt ID412 Priority/Priority Byte Offset 412 " else rgroup.long 0x580++0x03 line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" rgroup.long 0x584++0x03 line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" rgroup.long 0x588++0x03 line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" rgroup.long 0x58C++0x03 line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" rgroup.long 0x590++0x03 line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" rgroup.long 0x594++0x03 line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" rgroup.long 0x598++0x03 line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" rgroup.long 0x59C++0x03 line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) group.long 0x5A0++0x03 line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hexmask.long.byte 0x00 24.--31. 1. " INTID419 ,Interrupt ID419 Priority/Priority Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " INTID418 ,Interrupt ID418 Priority/Priority Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " INTID417 ,Interrupt ID417 Priority/Priority Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " INTID416 ,Interrupt ID416 Priority/Priority Byte Offset 416 " group.long 0x5A4++0x03 line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hexmask.long.byte 0x00 24.--31. 1. " INTID423 ,Interrupt ID423 Priority/Priority Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " INTID422 ,Interrupt ID422 Priority/Priority Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " INTID421 ,Interrupt ID421 Priority/Priority Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " INTID420 ,Interrupt ID420 Priority/Priority Byte Offset 420 " group.long 0x5A8++0x03 line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hexmask.long.byte 0x00 24.--31. 1. " INTID427 ,Interrupt ID427 Priority/Priority Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " INTID426 ,Interrupt ID426 Priority/Priority Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " INTID425 ,Interrupt ID425 Priority/Priority Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " INTID424 ,Interrupt ID424 Priority/Priority Byte Offset 424 " group.long 0x5AC++0x03 line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hexmask.long.byte 0x00 24.--31. 1. " INTID431 ,Interrupt ID431 Priority/Priority Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " INTID430 ,Interrupt ID430 Priority/Priority Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " INTID429 ,Interrupt ID429 Priority/Priority Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " INTID428 ,Interrupt ID428 Priority/Priority Byte Offset 428 " group.long 0x5B0++0x03 line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hexmask.long.byte 0x00 24.--31. 1. " INTID435 ,Interrupt ID435 Priority/Priority Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " INTID434 ,Interrupt ID434 Priority/Priority Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " INTID433 ,Interrupt ID433 Priority/Priority Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " INTID432 ,Interrupt ID432 Priority/Priority Byte Offset 432 " group.long 0x5B4++0x03 line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hexmask.long.byte 0x00 24.--31. 1. " INTID439 ,Interrupt ID439 Priority/Priority Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " INTID438 ,Interrupt ID438 Priority/Priority Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " INTID437 ,Interrupt ID437 Priority/Priority Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " INTID436 ,Interrupt ID436 Priority/Priority Byte Offset 436 " group.long 0x5B8++0x03 line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hexmask.long.byte 0x00 24.--31. 1. " INTID443 ,Interrupt ID443 Priority/Priority Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " INTID442 ,Interrupt ID442 Priority/Priority Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " INTID441 ,Interrupt ID441 Priority/Priority Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " INTID440 ,Interrupt ID440 Priority/Priority Byte Offset 440 " group.long 0x5BC++0x03 line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" hexmask.long.byte 0x00 24.--31. 1. " INTID447 ,Interrupt ID447 Priority/Priority Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " INTID446 ,Interrupt ID446 Priority/Priority Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " INTID445 ,Interrupt ID445 Priority/Priority Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " INTID444 ,Interrupt ID444 Priority/Priority Byte Offset 444 " else rgroup.long 0x5A0++0x03 line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" rgroup.long 0x5A4++0x03 line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" rgroup.long 0x5A8++0x03 line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" rgroup.long 0x5AC++0x03 line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" rgroup.long 0x5B0++0x03 line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" rgroup.long 0x5B4++0x03 line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" rgroup.long 0x5B8++0x03 line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" rgroup.long 0x5BC++0x03 line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) group.long 0x5C0++0x03 line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hexmask.long.byte 0x00 24.--31. 1. " INTID451 ,Interrupt ID451 Priority/Priority Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " INTID450 ,Interrupt ID450 Priority/Priority Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " INTID449 ,Interrupt ID449 Priority/Priority Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " INTID448 ,Interrupt ID448 Priority/Priority Byte Offset 448 " group.long 0x5C4++0x03 line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hexmask.long.byte 0x00 24.--31. 1. " INTID455 ,Interrupt ID455 Priority/Priority Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " INTID454 ,Interrupt ID454 Priority/Priority Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " INTID453 ,Interrupt ID453 Priority/Priority Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " INTID452 ,Interrupt ID452 Priority/Priority Byte Offset 452 " group.long 0x5C8++0x03 line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hexmask.long.byte 0x00 24.--31. 1. " INTID459 ,Interrupt ID459 Priority/Priority Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " INTID458 ,Interrupt ID458 Priority/Priority Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " INTID457 ,Interrupt ID457 Priority/Priority Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " INTID456 ,Interrupt ID456 Priority/Priority Byte Offset 456 " group.long 0x5CC++0x03 line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hexmask.long.byte 0x00 24.--31. 1. " INTID463 ,Interrupt ID463 Priority/Priority Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " INTID462 ,Interrupt ID462 Priority/Priority Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " INTID461 ,Interrupt ID461 Priority/Priority Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " INTID460 ,Interrupt ID460 Priority/Priority Byte Offset 460 " group.long 0x5D0++0x03 line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hexmask.long.byte 0x00 24.--31. 1. " INTID467 ,Interrupt ID467 Priority/Priority Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " INTID466 ,Interrupt ID466 Priority/Priority Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " INTID465 ,Interrupt ID465 Priority/Priority Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " INTID464 ,Interrupt ID464 Priority/Priority Byte Offset 464 " group.long 0x5D4++0x03 line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hexmask.long.byte 0x00 24.--31. 1. " INTID471 ,Interrupt ID471 Priority/Priority Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " INTID470 ,Interrupt ID470 Priority/Priority Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " INTID469 ,Interrupt ID469 Priority/Priority Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " INTID468 ,Interrupt ID468 Priority/Priority Byte Offset 468 " group.long 0x5D8++0x03 line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hexmask.long.byte 0x00 24.--31. 1. " INTID475 ,Interrupt ID475 Priority/Priority Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " INTID474 ,Interrupt ID474 Priority/Priority Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " INTID473 ,Interrupt ID473 Priority/Priority Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " INTID472 ,Interrupt ID472 Priority/Priority Byte Offset 472 " group.long 0x5DC++0x03 line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" hexmask.long.byte 0x00 24.--31. 1. " INTID479 ,Interrupt ID479 Priority/Priority Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " INTID478 ,Interrupt ID478 Priority/Priority Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " INTID477 ,Interrupt ID477 Priority/Priority Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " INTID476 ,Interrupt ID476 Priority/Priority Byte Offset 476 " else rgroup.long 0x5C0++0x03 line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" rgroup.long 0x5C4++0x03 line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" rgroup.long 0x5C8++0x03 line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" rgroup.long 0x5CC++0x03 line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" rgroup.long 0x5D0++0x03 line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" rgroup.long 0x5D4++0x03 line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" rgroup.long 0x5D8++0x03 line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" rgroup.long 0x5DC++0x03 line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) group.long 0x5E0++0x03 line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hexmask.long.byte 0x00 24.--31. 1. " INTID483 ,Interrupt ID483 Priority/Priority Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " INTID482 ,Interrupt ID482 Priority/Priority Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " INTID481 ,Interrupt ID481 Priority/Priority Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " INTID480 ,Interrupt ID480 Priority/Priority Byte Offset 480 " group.long 0x5E4++0x03 line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hexmask.long.byte 0x00 24.--31. 1. " INTID487 ,Interrupt ID487 Priority/Priority Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " INTID486 ,Interrupt ID486 Priority/Priority Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " INTID485 ,Interrupt ID485 Priority/Priority Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " INTID484 ,Interrupt ID484 Priority/Priority Byte Offset 484 " group.long 0x5E8++0x03 line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hexmask.long.byte 0x00 24.--31. 1. " INTID491 ,Interrupt ID491 Priority/Priority Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " INTID490 ,Interrupt ID490 Priority/Priority Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " INTID489 ,Interrupt ID489 Priority/Priority Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " INTID488 ,Interrupt ID488 Priority/Priority Byte Offset 488 " group.long 0x5EC++0x03 line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hexmask.long.byte 0x00 24.--31. 1. " INTID495 ,Interrupt ID495 Priority/Priority Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " INTID494 ,Interrupt ID494 Priority/Priority Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " INTID493 ,Interrupt ID493 Priority/Priority Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " INTID492 ,Interrupt ID492 Priority/Priority Byte Offset 492 " group.long 0x5F0++0x03 line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hexmask.long.byte 0x00 24.--31. 1. " INTID499 ,Interrupt ID499 Priority/Priority Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " INTID498 ,Interrupt ID498 Priority/Priority Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " INTID497 ,Interrupt ID497 Priority/Priority Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " INTID496 ,Interrupt ID496 Priority/Priority Byte Offset 496 " group.long 0x5F4++0x03 line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hexmask.long.byte 0x00 24.--31. 1. " INTID503 ,Interrupt ID503 Priority/Priority Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " INTID502 ,Interrupt ID502 Priority/Priority Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " INTID501 ,Interrupt ID501 Priority/Priority Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " INTID500 ,Interrupt ID500 Priority/Priority Byte Offset 500 " group.long 0x5F8++0x03 line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hexmask.long.byte 0x00 24.--31. 1. " INTID507 ,Interrupt ID507 Priority/Priority Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " INTID506 ,Interrupt ID506 Priority/Priority Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " INTID505 ,Interrupt ID505 Priority/Priority Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " INTID504 ,Interrupt ID504 Priority/Priority Byte Offset 504 " group.long 0x5FC++0x03 line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" hexmask.long.byte 0x00 24.--31. 1. " INTID511 ,Interrupt ID511 Priority/Priority Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " INTID510 ,Interrupt ID510 Priority/Priority Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " INTID509 ,Interrupt ID509 Priority/Priority Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " INTID508 ,Interrupt ID508 Priority/Priority Byte Offset 508 " else rgroup.long 0x5E0++0x03 line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" rgroup.long 0x5E4++0x03 line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" rgroup.long 0x5E8++0x03 line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" rgroup.long 0x5EC++0x03 line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" rgroup.long 0x5F0++0x03 line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" rgroup.long 0x5F4++0x03 line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" rgroup.long 0x5F8++0x03 line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" rgroup.long 0x5FC++0x03 line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) group.long 0x600++0x03 line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hexmask.long.byte 0x00 24.--31. 1. " INTID515 ,Interrupt ID515 Priority/Priority Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " INTID514 ,Interrupt ID514 Priority/Priority Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " INTID513 ,Interrupt ID513 Priority/Priority Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " INTID512 ,Interrupt ID512 Priority/Priority Byte Offset 512 " group.long 0x604++0x03 line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hexmask.long.byte 0x00 24.--31. 1. " INTID519 ,Interrupt ID519 Priority/Priority Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " INTID518 ,Interrupt ID518 Priority/Priority Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " INTID517 ,Interrupt ID517 Priority/Priority Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " INTID516 ,Interrupt ID516 Priority/Priority Byte Offset 516 " group.long 0x608++0x03 line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hexmask.long.byte 0x00 24.--31. 1. " INTID523 ,Interrupt ID523 Priority/Priority Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " INTID522 ,Interrupt ID522 Priority/Priority Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " INTID521 ,Interrupt ID521 Priority/Priority Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " INTID520 ,Interrupt ID520 Priority/Priority Byte Offset 520 " group.long 0x60C++0x03 line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hexmask.long.byte 0x00 24.--31. 1. " INTID527 ,Interrupt ID527 Priority/Priority Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " INTID526 ,Interrupt ID526 Priority/Priority Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " INTID525 ,Interrupt ID525 Priority/Priority Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " INTID524 ,Interrupt ID524 Priority/Priority Byte Offset 524 " group.long 0x610++0x03 line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hexmask.long.byte 0x00 24.--31. 1. " INTID531 ,Interrupt ID531 Priority/Priority Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " INTID530 ,Interrupt ID530 Priority/Priority Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " INTID529 ,Interrupt ID529 Priority/Priority Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " INTID528 ,Interrupt ID528 Priority/Priority Byte Offset 528 " group.long 0x614++0x03 line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hexmask.long.byte 0x00 24.--31. 1. " INTID535 ,Interrupt ID535 Priority/Priority Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " INTID534 ,Interrupt ID534 Priority/Priority Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " INTID533 ,Interrupt ID533 Priority/Priority Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " INTID532 ,Interrupt ID532 Priority/Priority Byte Offset 532 " group.long 0x618++0x03 line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hexmask.long.byte 0x00 24.--31. 1. " INTID539 ,Interrupt ID539 Priority/Priority Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " INTID538 ,Interrupt ID538 Priority/Priority Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " INTID537 ,Interrupt ID537 Priority/Priority Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " INTID536 ,Interrupt ID536 Priority/Priority Byte Offset 536 " group.long 0x61C++0x03 line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" hexmask.long.byte 0x00 24.--31. 1. " INTID543 ,Interrupt ID543 Priority/Priority Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " INTID542 ,Interrupt ID542 Priority/Priority Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " INTID541 ,Interrupt ID541 Priority/Priority Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " INTID540 ,Interrupt ID540 Priority/Priority Byte Offset 540 " else rgroup.long 0x600++0x03 line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" rgroup.long 0x604++0x03 line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" rgroup.long 0x608++0x03 line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" rgroup.long 0x60C++0x03 line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" rgroup.long 0x610++0x03 line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" rgroup.long 0x614++0x03 line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" rgroup.long 0x618++0x03 line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" rgroup.long 0x61C++0x03 line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) group.long 0x620++0x03 line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hexmask.long.byte 0x00 24.--31. 1. " INTID547 ,Interrupt ID547 Priority/Priority Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " INTID546 ,Interrupt ID546 Priority/Priority Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " INTID545 ,Interrupt ID545 Priority/Priority Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " INTID544 ,Interrupt ID544 Priority/Priority Byte Offset 544 " group.long 0x624++0x03 line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hexmask.long.byte 0x00 24.--31. 1. " INTID551 ,Interrupt ID551 Priority/Priority Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " INTID550 ,Interrupt ID550 Priority/Priority Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " INTID549 ,Interrupt ID549 Priority/Priority Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " INTID548 ,Interrupt ID548 Priority/Priority Byte Offset 548 " group.long 0x628++0x03 line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hexmask.long.byte 0x00 24.--31. 1. " INTID555 ,Interrupt ID555 Priority/Priority Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " INTID554 ,Interrupt ID554 Priority/Priority Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " INTID553 ,Interrupt ID553 Priority/Priority Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " INTID552 ,Interrupt ID552 Priority/Priority Byte Offset 552 " group.long 0x62C++0x03 line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hexmask.long.byte 0x00 24.--31. 1. " INTID559 ,Interrupt ID559 Priority/Priority Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " INTID558 ,Interrupt ID558 Priority/Priority Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " INTID557 ,Interrupt ID557 Priority/Priority Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " INTID556 ,Interrupt ID556 Priority/Priority Byte Offset 556 " group.long 0x630++0x03 line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hexmask.long.byte 0x00 24.--31. 1. " INTID563 ,Interrupt ID563 Priority/Priority Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " INTID562 ,Interrupt ID562 Priority/Priority Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " INTID561 ,Interrupt ID561 Priority/Priority Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " INTID560 ,Interrupt ID560 Priority/Priority Byte Offset 560 " group.long 0x634++0x03 line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hexmask.long.byte 0x00 24.--31. 1. " INTID567 ,Interrupt ID567 Priority/Priority Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " INTID566 ,Interrupt ID566 Priority/Priority Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " INTID565 ,Interrupt ID565 Priority/Priority Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " INTID564 ,Interrupt ID564 Priority/Priority Byte Offset 564 " group.long 0x638++0x03 line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hexmask.long.byte 0x00 24.--31. 1. " INTID571 ,Interrupt ID571 Priority/Priority Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " INTID570 ,Interrupt ID570 Priority/Priority Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " INTID569 ,Interrupt ID569 Priority/Priority Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " INTID568 ,Interrupt ID568 Priority/Priority Byte Offset 568 " group.long 0x63C++0x03 line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" hexmask.long.byte 0x00 24.--31. 1. " INTID575 ,Interrupt ID575 Priority/Priority Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " INTID574 ,Interrupt ID574 Priority/Priority Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " INTID573 ,Interrupt ID573 Priority/Priority Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " INTID572 ,Interrupt ID572 Priority/Priority Byte Offset 572 " else rgroup.long 0x620++0x03 line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" rgroup.long 0x624++0x03 line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" rgroup.long 0x628++0x03 line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" rgroup.long 0x62C++0x03 line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" rgroup.long 0x630++0x03 line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" rgroup.long 0x634++0x03 line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" rgroup.long 0x638++0x03 line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" rgroup.long 0x63C++0x03 line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) group.long 0x640++0x03 line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hexmask.long.byte 0x00 24.--31. 1. " INTID579 ,Interrupt ID579 Priority/Priority Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " INTID578 ,Interrupt ID578 Priority/Priority Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " INTID577 ,Interrupt ID577 Priority/Priority Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " INTID576 ,Interrupt ID576 Priority/Priority Byte Offset 576 " group.long 0x644++0x03 line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hexmask.long.byte 0x00 24.--31. 1. " INTID583 ,Interrupt ID583 Priority/Priority Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " INTID582 ,Interrupt ID582 Priority/Priority Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " INTID581 ,Interrupt ID581 Priority/Priority Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " INTID580 ,Interrupt ID580 Priority/Priority Byte Offset 580 " group.long 0x648++0x03 line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hexmask.long.byte 0x00 24.--31. 1. " INTID587 ,Interrupt ID587 Priority/Priority Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " INTID586 ,Interrupt ID586 Priority/Priority Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " INTID585 ,Interrupt ID585 Priority/Priority Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " INTID584 ,Interrupt ID584 Priority/Priority Byte Offset 584 " group.long 0x64C++0x03 line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hexmask.long.byte 0x00 24.--31. 1. " INTID591 ,Interrupt ID591 Priority/Priority Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " INTID590 ,Interrupt ID590 Priority/Priority Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " INTID589 ,Interrupt ID589 Priority/Priority Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " INTID588 ,Interrupt ID588 Priority/Priority Byte Offset 588 " group.long 0x650++0x03 line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hexmask.long.byte 0x00 24.--31. 1. " INTID595 ,Interrupt ID595 Priority/Priority Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " INTID594 ,Interrupt ID594 Priority/Priority Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " INTID593 ,Interrupt ID593 Priority/Priority Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " INTID592 ,Interrupt ID592 Priority/Priority Byte Offset 592 " group.long 0x654++0x03 line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hexmask.long.byte 0x00 24.--31. 1. " INTID599 ,Interrupt ID599 Priority/Priority Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " INTID598 ,Interrupt ID598 Priority/Priority Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " INTID597 ,Interrupt ID597 Priority/Priority Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " INTID596 ,Interrupt ID596 Priority/Priority Byte Offset 596 " group.long 0x658++0x03 line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hexmask.long.byte 0x00 24.--31. 1. " INTID603 ,Interrupt ID603 Priority/Priority Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " INTID602 ,Interrupt ID602 Priority/Priority Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " INTID601 ,Interrupt ID601 Priority/Priority Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " INTID600 ,Interrupt ID600 Priority/Priority Byte Offset 600 " group.long 0x65C++0x03 line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" hexmask.long.byte 0x00 24.--31. 1. " INTID607 ,Interrupt ID607 Priority/Priority Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " INTID606 ,Interrupt ID606 Priority/Priority Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " INTID605 ,Interrupt ID605 Priority/Priority Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " INTID604 ,Interrupt ID604 Priority/Priority Byte Offset 604 " else rgroup.long 0x640++0x03 line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" rgroup.long 0x644++0x03 line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" rgroup.long 0x648++0x03 line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" rgroup.long 0x64C++0x03 line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" rgroup.long 0x650++0x03 line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" rgroup.long 0x654++0x03 line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" rgroup.long 0x658++0x03 line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" rgroup.long 0x65C++0x03 line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) group.long 0x660++0x03 line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hexmask.long.byte 0x00 24.--31. 1. " INTID611 ,Interrupt ID611 Priority/Priority Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " INTID610 ,Interrupt ID610 Priority/Priority Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " INTID609 ,Interrupt ID609 Priority/Priority Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " INTID608 ,Interrupt ID608 Priority/Priority Byte Offset 608 " group.long 0x664++0x03 line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hexmask.long.byte 0x00 24.--31. 1. " INTID615 ,Interrupt ID615 Priority/Priority Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " INTID614 ,Interrupt ID614 Priority/Priority Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " INTID613 ,Interrupt ID613 Priority/Priority Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " INTID612 ,Interrupt ID612 Priority/Priority Byte Offset 612 " group.long 0x668++0x03 line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hexmask.long.byte 0x00 24.--31. 1. " INTID619 ,Interrupt ID619 Priority/Priority Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " INTID618 ,Interrupt ID618 Priority/Priority Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " INTID617 ,Interrupt ID617 Priority/Priority Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " INTID616 ,Interrupt ID616 Priority/Priority Byte Offset 616 " group.long 0x66C++0x03 line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hexmask.long.byte 0x00 24.--31. 1. " INTID623 ,Interrupt ID623 Priority/Priority Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " INTID622 ,Interrupt ID622 Priority/Priority Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " INTID621 ,Interrupt ID621 Priority/Priority Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " INTID620 ,Interrupt ID620 Priority/Priority Byte Offset 620 " group.long 0x670++0x03 line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hexmask.long.byte 0x00 24.--31. 1. " INTID627 ,Interrupt ID627 Priority/Priority Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " INTID626 ,Interrupt ID626 Priority/Priority Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " INTID625 ,Interrupt ID625 Priority/Priority Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " INTID624 ,Interrupt ID624 Priority/Priority Byte Offset 624 " group.long 0x674++0x03 line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hexmask.long.byte 0x00 24.--31. 1. " INTID631 ,Interrupt ID631 Priority/Priority Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " INTID630 ,Interrupt ID630 Priority/Priority Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " INTID629 ,Interrupt ID629 Priority/Priority Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " INTID628 ,Interrupt ID628 Priority/Priority Byte Offset 628 " group.long 0x678++0x03 line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hexmask.long.byte 0x00 24.--31. 1. " INTID635 ,Interrupt ID635 Priority/Priority Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " INTID634 ,Interrupt ID634 Priority/Priority Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " INTID633 ,Interrupt ID633 Priority/Priority Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " INTID632 ,Interrupt ID632 Priority/Priority Byte Offset 632 " group.long 0x67C++0x03 line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" hexmask.long.byte 0x00 24.--31. 1. " INTID639 ,Interrupt ID639 Priority/Priority Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " INTID638 ,Interrupt ID638 Priority/Priority Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " INTID637 ,Interrupt ID637 Priority/Priority Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " INTID636 ,Interrupt ID636 Priority/Priority Byte Offset 636 " else rgroup.long 0x660++0x03 line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" rgroup.long 0x664++0x03 line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" rgroup.long 0x668++0x03 line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" rgroup.long 0x66C++0x03 line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" rgroup.long 0x670++0x03 line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" rgroup.long 0x674++0x03 line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" rgroup.long 0x678++0x03 line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" rgroup.long 0x67C++0x03 line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) group.long 0x680++0x03 line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hexmask.long.byte 0x00 24.--31. 1. " INTID643 ,Interrupt ID643 Priority/Priority Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " INTID642 ,Interrupt ID642 Priority/Priority Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " INTID641 ,Interrupt ID641 Priority/Priority Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " INTID640 ,Interrupt ID640 Priority/Priority Byte Offset 640 " group.long 0x684++0x03 line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hexmask.long.byte 0x00 24.--31. 1. " INTID647 ,Interrupt ID647 Priority/Priority Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " INTID646 ,Interrupt ID646 Priority/Priority Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " INTID645 ,Interrupt ID645 Priority/Priority Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " INTID644 ,Interrupt ID644 Priority/Priority Byte Offset 644 " group.long 0x688++0x03 line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hexmask.long.byte 0x00 24.--31. 1. " INTID651 ,Interrupt ID651 Priority/Priority Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " INTID650 ,Interrupt ID650 Priority/Priority Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " INTID649 ,Interrupt ID649 Priority/Priority Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " INTID648 ,Interrupt ID648 Priority/Priority Byte Offset 648 " group.long 0x68C++0x03 line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hexmask.long.byte 0x00 24.--31. 1. " INTID655 ,Interrupt ID655 Priority/Priority Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " INTID654 ,Interrupt ID654 Priority/Priority Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " INTID653 ,Interrupt ID653 Priority/Priority Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " INTID652 ,Interrupt ID652 Priority/Priority Byte Offset 652 " group.long 0x690++0x03 line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hexmask.long.byte 0x00 24.--31. 1. " INTID659 ,Interrupt ID659 Priority/Priority Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " INTID658 ,Interrupt ID658 Priority/Priority Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " INTID657 ,Interrupt ID657 Priority/Priority Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " INTID656 ,Interrupt ID656 Priority/Priority Byte Offset 656 " group.long 0x694++0x03 line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hexmask.long.byte 0x00 24.--31. 1. " INTID663 ,Interrupt ID663 Priority/Priority Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " INTID662 ,Interrupt ID662 Priority/Priority Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " INTID661 ,Interrupt ID661 Priority/Priority Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " INTID660 ,Interrupt ID660 Priority/Priority Byte Offset 660 " group.long 0x698++0x03 line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hexmask.long.byte 0x00 24.--31. 1. " INTID667 ,Interrupt ID667 Priority/Priority Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " INTID666 ,Interrupt ID666 Priority/Priority Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " INTID665 ,Interrupt ID665 Priority/Priority Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " INTID664 ,Interrupt ID664 Priority/Priority Byte Offset 664 " group.long 0x69C++0x03 line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" hexmask.long.byte 0x00 24.--31. 1. " INTID671 ,Interrupt ID671 Priority/Priority Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " INTID670 ,Interrupt ID670 Priority/Priority Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " INTID669 ,Interrupt ID669 Priority/Priority Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " INTID668 ,Interrupt ID668 Priority/Priority Byte Offset 668 " else rgroup.long 0x680++0x03 line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" rgroup.long 0x684++0x03 line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" rgroup.long 0x688++0x03 line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" rgroup.long 0x68C++0x03 line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" rgroup.long 0x690++0x03 line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" rgroup.long 0x694++0x03 line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" rgroup.long 0x698++0x03 line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" rgroup.long 0x69C++0x03 line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) group.long 0x6A0++0x03 line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hexmask.long.byte 0x00 24.--31. 1. " INTID675 ,Interrupt ID675 Priority/Priority Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " INTID674 ,Interrupt ID674 Priority/Priority Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " INTID673 ,Interrupt ID673 Priority/Priority Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " INTID672 ,Interrupt ID672 Priority/Priority Byte Offset 672 " group.long 0x6A4++0x03 line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hexmask.long.byte 0x00 24.--31. 1. " INTID679 ,Interrupt ID679 Priority/Priority Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " INTID678 ,Interrupt ID678 Priority/Priority Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " INTID677 ,Interrupt ID677 Priority/Priority Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " INTID676 ,Interrupt ID676 Priority/Priority Byte Offset 676 " group.long 0x6A8++0x03 line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hexmask.long.byte 0x00 24.--31. 1. " INTID683 ,Interrupt ID683 Priority/Priority Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " INTID682 ,Interrupt ID682 Priority/Priority Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " INTID681 ,Interrupt ID681 Priority/Priority Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " INTID680 ,Interrupt ID680 Priority/Priority Byte Offset 680 " group.long 0x6AC++0x03 line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hexmask.long.byte 0x00 24.--31. 1. " INTID687 ,Interrupt ID687 Priority/Priority Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " INTID686 ,Interrupt ID686 Priority/Priority Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " INTID685 ,Interrupt ID685 Priority/Priority Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " INTID684 ,Interrupt ID684 Priority/Priority Byte Offset 684 " group.long 0x6B0++0x03 line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hexmask.long.byte 0x00 24.--31. 1. " INTID691 ,Interrupt ID691 Priority/Priority Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " INTID690 ,Interrupt ID690 Priority/Priority Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " INTID689 ,Interrupt ID689 Priority/Priority Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " INTID688 ,Interrupt ID688 Priority/Priority Byte Offset 688 " group.long 0x6B4++0x03 line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hexmask.long.byte 0x00 24.--31. 1. " INTID695 ,Interrupt ID695 Priority/Priority Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " INTID694 ,Interrupt ID694 Priority/Priority Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " INTID693 ,Interrupt ID693 Priority/Priority Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " INTID692 ,Interrupt ID692 Priority/Priority Byte Offset 692 " group.long 0x6B8++0x03 line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hexmask.long.byte 0x00 24.--31. 1. " INTID699 ,Interrupt ID699 Priority/Priority Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " INTID698 ,Interrupt ID698 Priority/Priority Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " INTID697 ,Interrupt ID697 Priority/Priority Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " INTID696 ,Interrupt ID696 Priority/Priority Byte Offset 696 " group.long 0x6BC++0x03 line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" hexmask.long.byte 0x00 24.--31. 1. " INTID703 ,Interrupt ID703 Priority/Priority Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " INTID702 ,Interrupt ID702 Priority/Priority Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " INTID701 ,Interrupt ID701 Priority/Priority Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " INTID700 ,Interrupt ID700 Priority/Priority Byte Offset 700 " else rgroup.long 0x6A0++0x03 line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" rgroup.long 0x6A4++0x03 line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" rgroup.long 0x6A8++0x03 line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" rgroup.long 0x6AC++0x03 line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" rgroup.long 0x6B0++0x03 line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" rgroup.long 0x6B4++0x03 line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" rgroup.long 0x6B8++0x03 line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" rgroup.long 0x6BC++0x03 line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) group.long 0x6C0++0x03 line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hexmask.long.byte 0x00 24.--31. 1. " INTID707 ,Interrupt ID707 Priority/Priority Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " INTID706 ,Interrupt ID706 Priority/Priority Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " INTID705 ,Interrupt ID705 Priority/Priority Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " INTID704 ,Interrupt ID704 Priority/Priority Byte Offset 704 " group.long 0x6C4++0x03 line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hexmask.long.byte 0x00 24.--31. 1. " INTID711 ,Interrupt ID711 Priority/Priority Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " INTID710 ,Interrupt ID710 Priority/Priority Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " INTID709 ,Interrupt ID709 Priority/Priority Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " INTID708 ,Interrupt ID708 Priority/Priority Byte Offset 708 " group.long 0x6C8++0x03 line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hexmask.long.byte 0x00 24.--31. 1. " INTID715 ,Interrupt ID715 Priority/Priority Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " INTID714 ,Interrupt ID714 Priority/Priority Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " INTID713 ,Interrupt ID713 Priority/Priority Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " INTID712 ,Interrupt ID712 Priority/Priority Byte Offset 712 " group.long 0x6CC++0x03 line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hexmask.long.byte 0x00 24.--31. 1. " INTID719 ,Interrupt ID719 Priority/Priority Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " INTID718 ,Interrupt ID718 Priority/Priority Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " INTID717 ,Interrupt ID717 Priority/Priority Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " INTID716 ,Interrupt ID716 Priority/Priority Byte Offset 716 " group.long 0x6D0++0x03 line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hexmask.long.byte 0x00 24.--31. 1. " INTID723 ,Interrupt ID723 Priority/Priority Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " INTID722 ,Interrupt ID722 Priority/Priority Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " INTID721 ,Interrupt ID721 Priority/Priority Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " INTID720 ,Interrupt ID720 Priority/Priority Byte Offset 720 " group.long 0x6D4++0x03 line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hexmask.long.byte 0x00 24.--31. 1. " INTID727 ,Interrupt ID727 Priority/Priority Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " INTID726 ,Interrupt ID726 Priority/Priority Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " INTID725 ,Interrupt ID725 Priority/Priority Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " INTID724 ,Interrupt ID724 Priority/Priority Byte Offset 724 " group.long 0x6D8++0x03 line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hexmask.long.byte 0x00 24.--31. 1. " INTID731 ,Interrupt ID731 Priority/Priority Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " INTID730 ,Interrupt ID730 Priority/Priority Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " INTID729 ,Interrupt ID729 Priority/Priority Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " INTID728 ,Interrupt ID728 Priority/Priority Byte Offset 728 " group.long 0x6DC++0x03 line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" hexmask.long.byte 0x00 24.--31. 1. " INTID735 ,Interrupt ID735 Priority/Priority Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " INTID734 ,Interrupt ID734 Priority/Priority Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " INTID733 ,Interrupt ID733 Priority/Priority Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " INTID732 ,Interrupt ID732 Priority/Priority Byte Offset 732 " else rgroup.long 0x6C0++0x03 line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" rgroup.long 0x6C4++0x03 line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" rgroup.long 0x6C8++0x03 line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" rgroup.long 0x6CC++0x03 line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" rgroup.long 0x6D0++0x03 line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" rgroup.long 0x6D4++0x03 line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" rgroup.long 0x6D8++0x03 line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" rgroup.long 0x6DC++0x03 line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) group.long 0x6E0++0x03 line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hexmask.long.byte 0x00 24.--31. 1. " INTID739 ,Interrupt ID739 Priority/Priority Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " INTID738 ,Interrupt ID738 Priority/Priority Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " INTID737 ,Interrupt ID737 Priority/Priority Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " INTID736 ,Interrupt ID736 Priority/Priority Byte Offset 736 " group.long 0x6E4++0x03 line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hexmask.long.byte 0x00 24.--31. 1. " INTID743 ,Interrupt ID743 Priority/Priority Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " INTID742 ,Interrupt ID742 Priority/Priority Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " INTID741 ,Interrupt ID741 Priority/Priority Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " INTID740 ,Interrupt ID740 Priority/Priority Byte Offset 740 " group.long 0x6E8++0x03 line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hexmask.long.byte 0x00 24.--31. 1. " INTID747 ,Interrupt ID747 Priority/Priority Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " INTID746 ,Interrupt ID746 Priority/Priority Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " INTID745 ,Interrupt ID745 Priority/Priority Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " INTID744 ,Interrupt ID744 Priority/Priority Byte Offset 744 " group.long 0x6EC++0x03 line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hexmask.long.byte 0x00 24.--31. 1. " INTID751 ,Interrupt ID751 Priority/Priority Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " INTID750 ,Interrupt ID750 Priority/Priority Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " INTID749 ,Interrupt ID749 Priority/Priority Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " INTID748 ,Interrupt ID748 Priority/Priority Byte Offset 748 " group.long 0x6F0++0x03 line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hexmask.long.byte 0x00 24.--31. 1. " INTID755 ,Interrupt ID755 Priority/Priority Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " INTID754 ,Interrupt ID754 Priority/Priority Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " INTID753 ,Interrupt ID753 Priority/Priority Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " INTID752 ,Interrupt ID752 Priority/Priority Byte Offset 752 " group.long 0x6F4++0x03 line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hexmask.long.byte 0x00 24.--31. 1. " INTID759 ,Interrupt ID759 Priority/Priority Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " INTID758 ,Interrupt ID758 Priority/Priority Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " INTID757 ,Interrupt ID757 Priority/Priority Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " INTID756 ,Interrupt ID756 Priority/Priority Byte Offset 756 " group.long 0x6F8++0x03 line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hexmask.long.byte 0x00 24.--31. 1. " INTID763 ,Interrupt ID763 Priority/Priority Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " INTID762 ,Interrupt ID762 Priority/Priority Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " INTID761 ,Interrupt ID761 Priority/Priority Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " INTID760 ,Interrupt ID760 Priority/Priority Byte Offset 760 " group.long 0x6FC++0x03 line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" hexmask.long.byte 0x00 24.--31. 1. " INTID767 ,Interrupt ID767 Priority/Priority Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " INTID766 ,Interrupt ID766 Priority/Priority Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " INTID765 ,Interrupt ID765 Priority/Priority Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " INTID764 ,Interrupt ID764 Priority/Priority Byte Offset 764 " else rgroup.long 0x6E0++0x03 line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" rgroup.long 0x6E4++0x03 line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" rgroup.long 0x6E8++0x03 line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" rgroup.long 0x6EC++0x03 line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" rgroup.long 0x6F0++0x03 line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" rgroup.long 0x6F4++0x03 line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" rgroup.long 0x6F8++0x03 line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" rgroup.long 0x6FC++0x03 line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) group.long 0x700++0x03 line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hexmask.long.byte 0x00 24.--31. 1. " INTID771 ,Interrupt ID771 Priority/Priority Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " INTID770 ,Interrupt ID770 Priority/Priority Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " INTID769 ,Interrupt ID769 Priority/Priority Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " INTID768 ,Interrupt ID768 Priority/Priority Byte Offset 768 " group.long 0x704++0x03 line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hexmask.long.byte 0x00 24.--31. 1. " INTID775 ,Interrupt ID775 Priority/Priority Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " INTID774 ,Interrupt ID774 Priority/Priority Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " INTID773 ,Interrupt ID773 Priority/Priority Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " INTID772 ,Interrupt ID772 Priority/Priority Byte Offset 772 " group.long 0x708++0x03 line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hexmask.long.byte 0x00 24.--31. 1. " INTID779 ,Interrupt ID779 Priority/Priority Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " INTID778 ,Interrupt ID778 Priority/Priority Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " INTID777 ,Interrupt ID777 Priority/Priority Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " INTID776 ,Interrupt ID776 Priority/Priority Byte Offset 776 " group.long 0x70C++0x03 line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hexmask.long.byte 0x00 24.--31. 1. " INTID783 ,Interrupt ID783 Priority/Priority Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " INTID782 ,Interrupt ID782 Priority/Priority Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " INTID781 ,Interrupt ID781 Priority/Priority Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " INTID780 ,Interrupt ID780 Priority/Priority Byte Offset 780 " group.long 0x710++0x03 line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hexmask.long.byte 0x00 24.--31. 1. " INTID787 ,Interrupt ID787 Priority/Priority Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " INTID786 ,Interrupt ID786 Priority/Priority Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " INTID785 ,Interrupt ID785 Priority/Priority Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " INTID784 ,Interrupt ID784 Priority/Priority Byte Offset 784 " group.long 0x714++0x03 line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hexmask.long.byte 0x00 24.--31. 1. " INTID791 ,Interrupt ID791 Priority/Priority Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " INTID790 ,Interrupt ID790 Priority/Priority Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " INTID789 ,Interrupt ID789 Priority/Priority Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " INTID788 ,Interrupt ID788 Priority/Priority Byte Offset 788 " group.long 0x718++0x03 line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hexmask.long.byte 0x00 24.--31. 1. " INTID795 ,Interrupt ID795 Priority/Priority Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " INTID794 ,Interrupt ID794 Priority/Priority Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " INTID793 ,Interrupt ID793 Priority/Priority Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " INTID792 ,Interrupt ID792 Priority/Priority Byte Offset 792 " group.long 0x71C++0x03 line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" hexmask.long.byte 0x00 24.--31. 1. " INTID799 ,Interrupt ID799 Priority/Priority Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " INTID798 ,Interrupt ID798 Priority/Priority Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " INTID797 ,Interrupt ID797 Priority/Priority Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " INTID796 ,Interrupt ID796 Priority/Priority Byte Offset 796 " else rgroup.long 0x700++0x03 line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" rgroup.long 0x704++0x03 line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" rgroup.long 0x708++0x03 line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" rgroup.long 0x70C++0x03 line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" rgroup.long 0x710++0x03 line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" rgroup.long 0x714++0x03 line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" rgroup.long 0x718++0x03 line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" rgroup.long 0x71C++0x03 line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) group.long 0x720++0x03 line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hexmask.long.byte 0x00 24.--31. 1. " INTID803 ,Interrupt ID803 Priority/Priority Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " INTID802 ,Interrupt ID802 Priority/Priority Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " INTID801 ,Interrupt ID801 Priority/Priority Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " INTID800 ,Interrupt ID800 Priority/Priority Byte Offset 800 " group.long 0x724++0x03 line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hexmask.long.byte 0x00 24.--31. 1. " INTID807 ,Interrupt ID807 Priority/Priority Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " INTID806 ,Interrupt ID806 Priority/Priority Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " INTID805 ,Interrupt ID805 Priority/Priority Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " INTID804 ,Interrupt ID804 Priority/Priority Byte Offset 804 " group.long 0x728++0x03 line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hexmask.long.byte 0x00 24.--31. 1. " INTID811 ,Interrupt ID811 Priority/Priority Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " INTID810 ,Interrupt ID810 Priority/Priority Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " INTID809 ,Interrupt ID809 Priority/Priority Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " INTID808 ,Interrupt ID808 Priority/Priority Byte Offset 808 " group.long 0x72C++0x03 line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hexmask.long.byte 0x00 24.--31. 1. " INTID815 ,Interrupt ID815 Priority/Priority Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " INTID814 ,Interrupt ID814 Priority/Priority Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " INTID813 ,Interrupt ID813 Priority/Priority Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " INTID812 ,Interrupt ID812 Priority/Priority Byte Offset 812 " group.long 0x730++0x03 line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hexmask.long.byte 0x00 24.--31. 1. " INTID819 ,Interrupt ID819 Priority/Priority Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " INTID818 ,Interrupt ID818 Priority/Priority Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " INTID817 ,Interrupt ID817 Priority/Priority Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " INTID816 ,Interrupt ID816 Priority/Priority Byte Offset 816 " group.long 0x734++0x03 line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hexmask.long.byte 0x00 24.--31. 1. " INTID823 ,Interrupt ID823 Priority/Priority Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " INTID822 ,Interrupt ID822 Priority/Priority Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " INTID821 ,Interrupt ID821 Priority/Priority Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " INTID820 ,Interrupt ID820 Priority/Priority Byte Offset 820 " group.long 0x738++0x03 line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hexmask.long.byte 0x00 24.--31. 1. " INTID827 ,Interrupt ID827 Priority/Priority Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " INTID826 ,Interrupt ID826 Priority/Priority Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " INTID825 ,Interrupt ID825 Priority/Priority Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " INTID824 ,Interrupt ID824 Priority/Priority Byte Offset 824 " group.long 0x73C++0x03 line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" hexmask.long.byte 0x00 24.--31. 1. " INTID831 ,Interrupt ID831 Priority/Priority Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " INTID830 ,Interrupt ID830 Priority/Priority Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " INTID829 ,Interrupt ID829 Priority/Priority Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " INTID828 ,Interrupt ID828 Priority/Priority Byte Offset 828 " else rgroup.long 0x720++0x03 line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" rgroup.long 0x724++0x03 line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" rgroup.long 0x728++0x03 line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" rgroup.long 0x72C++0x03 line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" rgroup.long 0x730++0x03 line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" rgroup.long 0x734++0x03 line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" rgroup.long 0x738++0x03 line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" rgroup.long 0x73C++0x03 line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) group.long 0x740++0x03 line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hexmask.long.byte 0x00 24.--31. 1. " INTID835 ,Interrupt ID835 Priority/Priority Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " INTID834 ,Interrupt ID834 Priority/Priority Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " INTID833 ,Interrupt ID833 Priority/Priority Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " INTID832 ,Interrupt ID832 Priority/Priority Byte Offset 832 " group.long 0x744++0x03 line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hexmask.long.byte 0x00 24.--31. 1. " INTID839 ,Interrupt ID839 Priority/Priority Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " INTID838 ,Interrupt ID838 Priority/Priority Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " INTID837 ,Interrupt ID837 Priority/Priority Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " INTID836 ,Interrupt ID836 Priority/Priority Byte Offset 836 " group.long 0x748++0x03 line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hexmask.long.byte 0x00 24.--31. 1. " INTID843 ,Interrupt ID843 Priority/Priority Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " INTID842 ,Interrupt ID842 Priority/Priority Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " INTID841 ,Interrupt ID841 Priority/Priority Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " INTID840 ,Interrupt ID840 Priority/Priority Byte Offset 840 " group.long 0x74C++0x03 line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hexmask.long.byte 0x00 24.--31. 1. " INTID847 ,Interrupt ID847 Priority/Priority Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " INTID846 ,Interrupt ID846 Priority/Priority Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " INTID845 ,Interrupt ID845 Priority/Priority Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " INTID844 ,Interrupt ID844 Priority/Priority Byte Offset 844 " group.long 0x750++0x03 line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hexmask.long.byte 0x00 24.--31. 1. " INTID851 ,Interrupt ID851 Priority/Priority Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " INTID850 ,Interrupt ID850 Priority/Priority Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " INTID849 ,Interrupt ID849 Priority/Priority Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " INTID848 ,Interrupt ID848 Priority/Priority Byte Offset 848 " group.long 0x754++0x03 line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hexmask.long.byte 0x00 24.--31. 1. " INTID855 ,Interrupt ID855 Priority/Priority Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " INTID854 ,Interrupt ID854 Priority/Priority Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " INTID853 ,Interrupt ID853 Priority/Priority Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " INTID852 ,Interrupt ID852 Priority/Priority Byte Offset 852 " group.long 0x758++0x03 line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hexmask.long.byte 0x00 24.--31. 1. " INTID859 ,Interrupt ID859 Priority/Priority Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " INTID858 ,Interrupt ID858 Priority/Priority Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " INTID857 ,Interrupt ID857 Priority/Priority Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " INTID856 ,Interrupt ID856 Priority/Priority Byte Offset 856 " group.long 0x75C++0x03 line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" hexmask.long.byte 0x00 24.--31. 1. " INTID863 ,Interrupt ID863 Priority/Priority Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " INTID862 ,Interrupt ID862 Priority/Priority Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " INTID861 ,Interrupt ID861 Priority/Priority Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " INTID860 ,Interrupt ID860 Priority/Priority Byte Offset 860 " else rgroup.long 0x740++0x03 line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" rgroup.long 0x744++0x03 line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" rgroup.long 0x748++0x03 line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" rgroup.long 0x74C++0x03 line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" rgroup.long 0x750++0x03 line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" rgroup.long 0x754++0x03 line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" rgroup.long 0x758++0x03 line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" rgroup.long 0x75C++0x03 line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) group.long 0x760++0x03 line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hexmask.long.byte 0x00 24.--31. 1. " INTID867 ,Interrupt ID867 Priority/Priority Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " INTID866 ,Interrupt ID866 Priority/Priority Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " INTID865 ,Interrupt ID865 Priority/Priority Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " INTID864 ,Interrupt ID864 Priority/Priority Byte Offset 864 " group.long 0x764++0x03 line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hexmask.long.byte 0x00 24.--31. 1. " INTID871 ,Interrupt ID871 Priority/Priority Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " INTID870 ,Interrupt ID870 Priority/Priority Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " INTID869 ,Interrupt ID869 Priority/Priority Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " INTID868 ,Interrupt ID868 Priority/Priority Byte Offset 868 " group.long 0x768++0x03 line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hexmask.long.byte 0x00 24.--31. 1. " INTID875 ,Interrupt ID875 Priority/Priority Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " INTID874 ,Interrupt ID874 Priority/Priority Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " INTID873 ,Interrupt ID873 Priority/Priority Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " INTID872 ,Interrupt ID872 Priority/Priority Byte Offset 872 " group.long 0x76C++0x03 line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hexmask.long.byte 0x00 24.--31. 1. " INTID879 ,Interrupt ID879 Priority/Priority Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " INTID878 ,Interrupt ID878 Priority/Priority Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " INTID877 ,Interrupt ID877 Priority/Priority Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " INTID876 ,Interrupt ID876 Priority/Priority Byte Offset 876 " group.long 0x770++0x03 line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hexmask.long.byte 0x00 24.--31. 1. " INTID883 ,Interrupt ID883 Priority/Priority Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " INTID882 ,Interrupt ID882 Priority/Priority Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " INTID881 ,Interrupt ID881 Priority/Priority Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " INTID880 ,Interrupt ID880 Priority/Priority Byte Offset 880 " group.long 0x774++0x03 line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hexmask.long.byte 0x00 24.--31. 1. " INTID887 ,Interrupt ID887 Priority/Priority Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " INTID886 ,Interrupt ID886 Priority/Priority Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " INTID885 ,Interrupt ID885 Priority/Priority Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " INTID884 ,Interrupt ID884 Priority/Priority Byte Offset 884 " group.long 0x778++0x03 line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hexmask.long.byte 0x00 24.--31. 1. " INTID891 ,Interrupt ID891 Priority/Priority Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " INTID890 ,Interrupt ID890 Priority/Priority Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " INTID889 ,Interrupt ID889 Priority/Priority Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " INTID888 ,Interrupt ID888 Priority/Priority Byte Offset 888 " group.long 0x77C++0x03 line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" hexmask.long.byte 0x00 24.--31. 1. " INTID895 ,Interrupt ID895 Priority/Priority Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " INTID894 ,Interrupt ID894 Priority/Priority Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " INTID893 ,Interrupt ID893 Priority/Priority Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " INTID892 ,Interrupt ID892 Priority/Priority Byte Offset 892 " else rgroup.long 0x760++0x03 line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" rgroup.long 0x764++0x03 line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" rgroup.long 0x768++0x03 line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" rgroup.long 0x76C++0x03 line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" rgroup.long 0x770++0x03 line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" rgroup.long 0x774++0x03 line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" rgroup.long 0x778++0x03 line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" rgroup.long 0x77C++0x03 line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) group.long 0x780++0x03 line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hexmask.long.byte 0x00 24.--31. 1. " INTID899 ,Interrupt ID899 Priority/Priority Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " INTID898 ,Interrupt ID898 Priority/Priority Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " INTID897 ,Interrupt ID897 Priority/Priority Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " INTID896 ,Interrupt ID896 Priority/Priority Byte Offset 896 " group.long 0x784++0x03 line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hexmask.long.byte 0x00 24.--31. 1. " INTID903 ,Interrupt ID903 Priority/Priority Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " INTID902 ,Interrupt ID902 Priority/Priority Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " INTID901 ,Interrupt ID901 Priority/Priority Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " INTID900 ,Interrupt ID900 Priority/Priority Byte Offset 900 " group.long 0x788++0x03 line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hexmask.long.byte 0x00 24.--31. 1. " INTID907 ,Interrupt ID907 Priority/Priority Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " INTID906 ,Interrupt ID906 Priority/Priority Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " INTID905 ,Interrupt ID905 Priority/Priority Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " INTID904 ,Interrupt ID904 Priority/Priority Byte Offset 904 " group.long 0x78C++0x03 line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hexmask.long.byte 0x00 24.--31. 1. " INTID911 ,Interrupt ID911 Priority/Priority Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " INTID910 ,Interrupt ID910 Priority/Priority Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " INTID909 ,Interrupt ID909 Priority/Priority Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " INTID908 ,Interrupt ID908 Priority/Priority Byte Offset 908 " group.long 0x790++0x03 line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hexmask.long.byte 0x00 24.--31. 1. " INTID915 ,Interrupt ID915 Priority/Priority Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " INTID914 ,Interrupt ID914 Priority/Priority Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " INTID913 ,Interrupt ID913 Priority/Priority Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " INTID912 ,Interrupt ID912 Priority/Priority Byte Offset 912 " group.long 0x794++0x03 line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hexmask.long.byte 0x00 24.--31. 1. " INTID919 ,Interrupt ID919 Priority/Priority Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " INTID918 ,Interrupt ID918 Priority/Priority Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " INTID917 ,Interrupt ID917 Priority/Priority Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " INTID916 ,Interrupt ID916 Priority/Priority Byte Offset 916 " group.long 0x798++0x03 line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hexmask.long.byte 0x00 24.--31. 1. " INTID923 ,Interrupt ID923 Priority/Priority Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " INTID922 ,Interrupt ID922 Priority/Priority Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " INTID921 ,Interrupt ID921 Priority/Priority Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " INTID920 ,Interrupt ID920 Priority/Priority Byte Offset 920 " group.long 0x79C++0x03 line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" hexmask.long.byte 0x00 24.--31. 1. " INTID927 ,Interrupt ID927 Priority/Priority Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " INTID926 ,Interrupt ID926 Priority/Priority Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " INTID925 ,Interrupt ID925 Priority/Priority Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " INTID924 ,Interrupt ID924 Priority/Priority Byte Offset 924 " else rgroup.long 0x780++0x03 line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" rgroup.long 0x784++0x03 line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" rgroup.long 0x788++0x03 line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" rgroup.long 0x78C++0x03 line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" rgroup.long 0x790++0x03 line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" rgroup.long 0x794++0x03 line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" rgroup.long 0x798++0x03 line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" rgroup.long 0x79C++0x03 line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) group.long 0x7A0++0x03 line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hexmask.long.byte 0x00 24.--31. 1. " INTID931 ,Interrupt ID931 Priority/Priority Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " INTID930 ,Interrupt ID930 Priority/Priority Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " INTID929 ,Interrupt ID929 Priority/Priority Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " INTID928 ,Interrupt ID928 Priority/Priority Byte Offset 928 " group.long 0x7A4++0x03 line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hexmask.long.byte 0x00 24.--31. 1. " INTID935 ,Interrupt ID935 Priority/Priority Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " INTID934 ,Interrupt ID934 Priority/Priority Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " INTID933 ,Interrupt ID933 Priority/Priority Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " INTID932 ,Interrupt ID932 Priority/Priority Byte Offset 932 " group.long 0x7A8++0x03 line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hexmask.long.byte 0x00 24.--31. 1. " INTID939 ,Interrupt ID939 Priority/Priority Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " INTID938 ,Interrupt ID938 Priority/Priority Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " INTID937 ,Interrupt ID937 Priority/Priority Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " INTID936 ,Interrupt ID936 Priority/Priority Byte Offset 936 " group.long 0x7AC++0x03 line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hexmask.long.byte 0x00 24.--31. 1. " INTID943 ,Interrupt ID943 Priority/Priority Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " INTID942 ,Interrupt ID942 Priority/Priority Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " INTID941 ,Interrupt ID941 Priority/Priority Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " INTID940 ,Interrupt ID940 Priority/Priority Byte Offset 940 " group.long 0x7B0++0x03 line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hexmask.long.byte 0x00 24.--31. 1. " INTID947 ,Interrupt ID947 Priority/Priority Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " INTID946 ,Interrupt ID946 Priority/Priority Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " INTID945 ,Interrupt ID945 Priority/Priority Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " INTID944 ,Interrupt ID944 Priority/Priority Byte Offset 944 " group.long 0x7B4++0x03 line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hexmask.long.byte 0x00 24.--31. 1. " INTID951 ,Interrupt ID951 Priority/Priority Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " INTID950 ,Interrupt ID950 Priority/Priority Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " INTID949 ,Interrupt ID949 Priority/Priority Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " INTID948 ,Interrupt ID948 Priority/Priority Byte Offset 948 " group.long 0x7B8++0x03 line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hexmask.long.byte 0x00 24.--31. 1. " INTID955 ,Interrupt ID955 Priority/Priority Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " INTID954 ,Interrupt ID954 Priority/Priority Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " INTID953 ,Interrupt ID953 Priority/Priority Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " INTID952 ,Interrupt ID952 Priority/Priority Byte Offset 952 " group.long 0x7BC++0x03 line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" hexmask.long.byte 0x00 24.--31. 1. " INTID959 ,Interrupt ID959 Priority/Priority Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " INTID958 ,Interrupt ID958 Priority/Priority Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " INTID957 ,Interrupt ID957 Priority/Priority Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " INTID956 ,Interrupt ID956 Priority/Priority Byte Offset 956 " else rgroup.long 0x7A0++0x03 line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" rgroup.long 0x7A4++0x03 line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" rgroup.long 0x7A8++0x03 line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" rgroup.long 0x7AC++0x03 line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" rgroup.long 0x7B0++0x03 line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" rgroup.long 0x7B4++0x03 line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" rgroup.long 0x7B8++0x03 line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" rgroup.long 0x7BC++0x03 line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) group.long 0x7C0++0x03 line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hexmask.long.byte 0x00 24.--31. 1. " INTID963 ,Interrupt ID963 Priority/Priority Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " INTID962 ,Interrupt ID962 Priority/Priority Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " INTID961 ,Interrupt ID961 Priority/Priority Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " INTID960 ,Interrupt ID960 Priority/Priority Byte Offset 960 " group.long 0x7C4++0x03 line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hexmask.long.byte 0x00 24.--31. 1. " INTID967 ,Interrupt ID967 Priority/Priority Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " INTID966 ,Interrupt ID966 Priority/Priority Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " INTID965 ,Interrupt ID965 Priority/Priority Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " INTID964 ,Interrupt ID964 Priority/Priority Byte Offset 964 " group.long 0x7C8++0x03 line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hexmask.long.byte 0x00 24.--31. 1. " INTID971 ,Interrupt ID971 Priority/Priority Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " INTID970 ,Interrupt ID970 Priority/Priority Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " INTID969 ,Interrupt ID969 Priority/Priority Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " INTID968 ,Interrupt ID968 Priority/Priority Byte Offset 968 " group.long 0x7CC++0x03 line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hexmask.long.byte 0x00 24.--31. 1. " INTID975 ,Interrupt ID975 Priority/Priority Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " INTID974 ,Interrupt ID974 Priority/Priority Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " INTID973 ,Interrupt ID973 Priority/Priority Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " INTID972 ,Interrupt ID972 Priority/Priority Byte Offset 972 " group.long 0x7D0++0x03 line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hexmask.long.byte 0x00 24.--31. 1. " INTID979 ,Interrupt ID979 Priority/Priority Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " INTID978 ,Interrupt ID978 Priority/Priority Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " INTID977 ,Interrupt ID977 Priority/Priority Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " INTID976 ,Interrupt ID976 Priority/Priority Byte Offset 976 " group.long 0x7D4++0x03 line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hexmask.long.byte 0x00 24.--31. 1. " INTID983 ,Interrupt ID983 Priority/Priority Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " INTID982 ,Interrupt ID982 Priority/Priority Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " INTID981 ,Interrupt ID981 Priority/Priority Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " INTID980 ,Interrupt ID980 Priority/Priority Byte Offset 980 " group.long 0x7D8++0x03 line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hexmask.long.byte 0x00 24.--31. 1. " INTID987 ,Interrupt ID987 Priority/Priority Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " INTID986 ,Interrupt ID986 Priority/Priority Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " INTID985 ,Interrupt ID985 Priority/Priority Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " INTID984 ,Interrupt ID984 Priority/Priority Byte Offset 984 " group.long 0x7DC++0x03 line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" hexmask.long.byte 0x00 24.--31. 1. " INTID991 ,Interrupt ID991 Priority/Priority Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " INTID990 ,Interrupt ID990 Priority/Priority Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " INTID989 ,Interrupt ID989 Priority/Priority Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " INTID988 ,Interrupt ID988 Priority/Priority Byte Offset 988 " else rgroup.long 0x7C0++0x03 line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" rgroup.long 0x7C4++0x03 line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" rgroup.long 0x7C8++0x03 line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" rgroup.long 0x7CC++0x03 line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" rgroup.long 0x7D0++0x03 line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" rgroup.long 0x7D4++0x03 line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" rgroup.long 0x7D8++0x03 line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" rgroup.long 0x7DC++0x03 line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1F) group.long 0x7E0++0x03 line.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248" hexmask.long.byte 0x00 24.--31. 1. " INTID995 ,Interrupt ID995 Priority/Priority Byte Offset 995 " hexmask.long.byte 0x00 16.--23. 1. " INTID994 ,Interrupt ID994 Priority/Priority Byte Offset 994 " hexmask.long.byte 0x00 8.--15. 1. " INTID993 ,Interrupt ID993 Priority/Priority Byte Offset 993 " hexmask.long.byte 0x00 0.--7. 1. " INTID992 ,Interrupt ID992 Priority/Priority Byte Offset 992 " group.long 0x7E4++0x03 line.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249" hexmask.long.byte 0x00 24.--31. 1. " INTID999 ,Interrupt ID999 Priority/Priority Byte Offset 999 " hexmask.long.byte 0x00 16.--23. 1. " INTID998 ,Interrupt ID998 Priority/Priority Byte Offset 998 " hexmask.long.byte 0x00 8.--15. 1. " INTID997 ,Interrupt ID997 Priority/Priority Byte Offset 997 " hexmask.long.byte 0x00 0.--7. 1. " INTID996 ,Interrupt ID996 Priority/Priority Byte Offset 996 " group.long 0x7E8++0x03 line.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250" hexmask.long.byte 0x00 24.--31. 1. " INTID1003 ,Interrupt ID1003 Priority/Priority Byte Offset 1003" hexmask.long.byte 0x00 16.--23. 1. " INTID1002 ,Interrupt ID1002 Priority/Priority Byte Offset 1002" hexmask.long.byte 0x00 8.--15. 1. " INTID1001 ,Interrupt ID1001 Priority/Priority Byte Offset 1001" hexmask.long.byte 0x00 0.--7. 1. " INTID1000 ,Interrupt ID1000 Priority/Priority Byte Offset 1000" group.long 0x7EC++0x03 line.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251" hexmask.long.byte 0x00 24.--31. 1. " INTID1007 ,Interrupt ID1007 Priority/Priority Byte Offset 1007" hexmask.long.byte 0x00 16.--23. 1. " INTID1006 ,Interrupt ID1006 Priority/Priority Byte Offset 1006" hexmask.long.byte 0x00 8.--15. 1. " INTID1005 ,Interrupt ID1005 Priority/Priority Byte Offset 1005" hexmask.long.byte 0x00 0.--7. 1. " INTID1004 ,Interrupt ID1004 Priority/Priority Byte Offset 1004" group.long 0x7F0++0x03 line.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252" hexmask.long.byte 0x00 24.--31. 1. " INTID1011 ,Interrupt ID1011 Priority/Priority Byte Offset 1011" hexmask.long.byte 0x00 16.--23. 1. " INTID1010 ,Interrupt ID1010 Priority/Priority Byte Offset 1010" hexmask.long.byte 0x00 8.--15. 1. " INTID1009 ,Interrupt ID1009 Priority/Priority Byte Offset 1009" hexmask.long.byte 0x00 0.--7. 1. " INTID1008 ,Interrupt ID1008 Priority/Priority Byte Offset 1008" group.long 0x7F4++0x03 line.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253" hexmask.long.byte 0x00 24.--31. 1. " INTID1015 ,Interrupt ID1015 Priority/Priority Byte Offset 1015" hexmask.long.byte 0x00 16.--23. 1. " INTID1014 ,Interrupt ID1014 Priority/Priority Byte Offset 1014" hexmask.long.byte 0x00 8.--15. 1. " INTID1013 ,Interrupt ID1013 Priority/Priority Byte Offset 1013" hexmask.long.byte 0x00 0.--7. 1. " INTID1012 ,Interrupt ID1012 Priority/Priority Byte Offset 1012" group.long 0x7F8++0x03 line.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254" hexmask.long.byte 0x00 24.--31. 1. " INTID1019 ,Interrupt ID1019 Priority/Priority Byte Offset 1019" hexmask.long.byte 0x00 16.--23. 1. " INTID1018 ,Interrupt ID1018 Priority/Priority Byte Offset 1018" hexmask.long.byte 0x00 8.--15. 1. " INTID1017 ,Interrupt ID1017 Priority/Priority Byte Offset 1017" hexmask.long.byte 0x00 0.--7. 1. " INTID1016 ,Interrupt ID1016 Priority/Priority Byte Offset 1016" else rgroup.long 0x7E0++0x03 line.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248" rgroup.long 0x7E4++0x03 line.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249" rgroup.long 0x7E8++0x03 line.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250" rgroup.long 0x7EC++0x03 line.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251" rgroup.long 0x7F0++0x03 line.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252" rgroup.long 0x7F4++0x03 line.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253" rgroup.long 0x7F8++0x03 line.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254" endif tree.end width 19. tree "Processor Targets Registers" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x000000E0)>0x1) rgroup.long 0x800++0x03 line.long 0x00 "GICD_ITARGETSR0,Interrupt Processor Targets Register 0" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO3 ,CPU Targets Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO2 ,CPU Targets Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1 ,CPU Targets Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO0 ,CPU Targets Byte Offset 0 " rgroup.long 0x804++0x03 line.long 0x00 "GICD_ITARGETSR1,Interrupt Processor Targets Register 1" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO7 ,CPU Targets Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO6 ,CPU Targets Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO5 ,CPU Targets Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO4 ,CPU Targets Byte Offset 4 " rgroup.long 0x808++0x03 line.long 0x00 "GICD_ITARGETSR2,Interrupt Processor Targets Register 2" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO11 ,CPU Targets Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO10 ,CPU Targets Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO9 ,CPU Targets Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO8 ,CPU Targets Byte Offset 8 " rgroup.long 0x80C++0x03 line.long 0x00 "GICD_ITARGETSR3,Interrupt Processor Targets Register 3" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO15 ,CPU Targets Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO14 ,CPU Targets Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO13 ,CPU Targets Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO12 ,CPU Targets Byte Offset 12 " rgroup.long 0x810++0x03 line.long 0x00 "GICD_ITARGETSR4,Interrupt Processor Targets Register 4" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO19 ,CPU Targets Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO18 ,CPU Targets Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO17 ,CPU Targets Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO16 ,CPU Targets Byte Offset 16 " rgroup.long 0x814++0x03 line.long 0x00 "GICD_ITARGETSR5,Interrupt Processor Targets Register 5" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO23 ,CPU Targets Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO22 ,CPU Targets Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO21 ,CPU Targets Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO20 ,CPU Targets Byte Offset 20 " rgroup.long 0x818++0x03 line.long 0x00 "GICD_ITARGETSR6,Interrupt Processor Targets Register 6" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO27 ,CPU Targets Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO26 ,CPU Targets Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO25 ,CPU Targets Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO24 ,CPU Targets Byte Offset 24 " rgroup.long 0x81C++0x03 line.long 0x00 "GICD_ITARGETSR7,Interrupt Processor Targets Register 7" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO31 ,CPU Targets Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO30 ,CPU Targets Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO29 ,CPU Targets Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO28 ,CPU Targets Byte Offset 28 " if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) group.long 0x820++0x03 line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO35 ,CPU Targets Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO34 ,CPU Targets Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO33 ,CPU Targets Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO32 ,CPU Targets Byte Offset 32 " group.long 0x824++0x03 line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO39 ,CPU Targets Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO38 ,CPU Targets Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO37 ,CPU Targets Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO36 ,CPU Targets Byte Offset 36 " group.long 0x828++0x03 line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO43 ,CPU Targets Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO42 ,CPU Targets Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO41 ,CPU Targets Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO40 ,CPU Targets Byte Offset 40 " group.long 0x82C++0x03 line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO47 ,CPU Targets Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO46 ,CPU Targets Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO45 ,CPU Targets Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO44 ,CPU Targets Byte Offset 44 " group.long 0x830++0x03 line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO51 ,CPU Targets Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO50 ,CPU Targets Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO49 ,CPU Targets Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO48 ,CPU Targets Byte Offset 48 " group.long 0x834++0x03 line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO55 ,CPU Targets Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO54 ,CPU Targets Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO53 ,CPU Targets Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO52 ,CPU Targets Byte Offset 52 " group.long 0x838++0x03 line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO59 ,CPU Targets Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO58 ,CPU Targets Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO57 ,CPU Targets Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO56 ,CPU Targets Byte Offset 56 " group.long 0x83C++0x03 line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO63 ,CPU Targets Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO62 ,CPU Targets Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO61 ,CPU Targets Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO60 ,CPU Targets Byte Offset 60 " else rgroup.long 0x820++0x03 line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" rgroup.long 0x824++0x03 line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" rgroup.long 0x828++0x03 line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" rgroup.long 0x82C++0x03 line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" rgroup.long 0x830++0x03 line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" rgroup.long 0x834++0x03 line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" rgroup.long 0x838++0x03 line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" rgroup.long 0x83C++0x03 line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) group.long 0x840++0x03 line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO67 ,CPU Targets Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO66 ,CPU Targets Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO65 ,CPU Targets Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO64 ,CPU Targets Byte Offset 64 " group.long 0x844++0x03 line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO71 ,CPU Targets Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO70 ,CPU Targets Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO69 ,CPU Targets Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO68 ,CPU Targets Byte Offset 68 " group.long 0x848++0x03 line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO75 ,CPU Targets Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO74 ,CPU Targets Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO73 ,CPU Targets Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO72 ,CPU Targets Byte Offset 72 " group.long 0x84C++0x03 line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO79 ,CPU Targets Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO78 ,CPU Targets Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO77 ,CPU Targets Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO76 ,CPU Targets Byte Offset 76 " group.long 0x850++0x03 line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO83 ,CPU Targets Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO82 ,CPU Targets Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO81 ,CPU Targets Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO80 ,CPU Targets Byte Offset 80 " group.long 0x854++0x03 line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO87 ,CPU Targets Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO86 ,CPU Targets Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO85 ,CPU Targets Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO84 ,CPU Targets Byte Offset 84 " group.long 0x858++0x03 line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO91 ,CPU Targets Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO90 ,CPU Targets Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO89 ,CPU Targets Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO88 ,CPU Targets Byte Offset 88 " group.long 0x85C++0x03 line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO95 ,CPU Targets Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO94 ,CPU Targets Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO93 ,CPU Targets Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO92 ,CPU Targets Byte Offset 92 " else rgroup.long 0x840++0x03 line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" rgroup.long 0x844++0x03 line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" rgroup.long 0x848++0x03 line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" rgroup.long 0x84C++0x03 line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" rgroup.long 0x850++0x03 line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" rgroup.long 0x854++0x03 line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" rgroup.long 0x858++0x03 line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" rgroup.long 0x85C++0x03 line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) group.long 0x860++0x03 line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO99 ,CPU Targets Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO98 ,CPU Targets Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO97 ,CPU Targets Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO96 ,CPU Targets Byte Offset 96 " group.long 0x864++0x03 line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO103 ,CPU Targets Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO102 ,CPU Targets Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO101 ,CPU Targets Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO100 ,CPU Targets Byte Offset 100 " group.long 0x868++0x03 line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO107 ,CPU Targets Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO106 ,CPU Targets Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO105 ,CPU Targets Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO104 ,CPU Targets Byte Offset 104 " group.long 0x86C++0x03 line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO111 ,CPU Targets Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO110 ,CPU Targets Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO109 ,CPU Targets Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO108 ,CPU Targets Byte Offset 108 " group.long 0x870++0x03 line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO115 ,CPU Targets Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO114 ,CPU Targets Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO113 ,CPU Targets Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO112 ,CPU Targets Byte Offset 112 " group.long 0x874++0x03 line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO119 ,CPU Targets Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO118 ,CPU Targets Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO117 ,CPU Targets Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO116 ,CPU Targets Byte Offset 116 " group.long 0x878++0x03 line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO123 ,CPU Targets Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO122 ,CPU Targets Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO121 ,CPU Targets Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO120 ,CPU Targets Byte Offset 120 " group.long 0x87C++0x03 line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO127 ,CPU Targets Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO126 ,CPU Targets Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO125 ,CPU Targets Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO124 ,CPU Targets Byte Offset 124 " else rgroup.long 0x860++0x03 line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" rgroup.long 0x864++0x03 line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" rgroup.long 0x868++0x03 line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" rgroup.long 0x86C++0x03 line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" rgroup.long 0x870++0x03 line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" rgroup.long 0x874++0x03 line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" rgroup.long 0x878++0x03 line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" rgroup.long 0x87C++0x03 line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) group.long 0x880++0x03 line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO131 ,CPU Targets Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO130 ,CPU Targets Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO129 ,CPU Targets Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO128 ,CPU Targets Byte Offset 128 " group.long 0x884++0x03 line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO135 ,CPU Targets Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO134 ,CPU Targets Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO133 ,CPU Targets Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO132 ,CPU Targets Byte Offset 132 " group.long 0x888++0x03 line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO139 ,CPU Targets Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO138 ,CPU Targets Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO137 ,CPU Targets Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO136 ,CPU Targets Byte Offset 136 " group.long 0x88C++0x03 line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO143 ,CPU Targets Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO142 ,CPU Targets Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO141 ,CPU Targets Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO140 ,CPU Targets Byte Offset 140 " group.long 0x890++0x03 line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO147 ,CPU Targets Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO146 ,CPU Targets Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO145 ,CPU Targets Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO144 ,CPU Targets Byte Offset 144 " group.long 0x894++0x03 line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO151 ,CPU Targets Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO150 ,CPU Targets Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO149 ,CPU Targets Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO148 ,CPU Targets Byte Offset 148 " group.long 0x898++0x03 line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO155 ,CPU Targets Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO154 ,CPU Targets Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO153 ,CPU Targets Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO152 ,CPU Targets Byte Offset 152 " group.long 0x89C++0x03 line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO159 ,CPU Targets Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO158 ,CPU Targets Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO157 ,CPU Targets Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO156 ,CPU Targets Byte Offset 156 " else rgroup.long 0x880++0x03 line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" rgroup.long 0x884++0x03 line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" rgroup.long 0x888++0x03 line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" rgroup.long 0x88C++0x03 line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" rgroup.long 0x890++0x03 line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" rgroup.long 0x894++0x03 line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" rgroup.long 0x898++0x03 line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" rgroup.long 0x89C++0x03 line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) group.long 0x8A0++0x03 line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO163 ,CPU Targets Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO162 ,CPU Targets Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO161 ,CPU Targets Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO160 ,CPU Targets Byte Offset 160 " group.long 0x8A4++0x03 line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO167 ,CPU Targets Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO166 ,CPU Targets Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO165 ,CPU Targets Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO164 ,CPU Targets Byte Offset 164 " group.long 0x8A8++0x03 line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO171 ,CPU Targets Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO170 ,CPU Targets Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO169 ,CPU Targets Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO168 ,CPU Targets Byte Offset 168 " group.long 0x8AC++0x03 line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO175 ,CPU Targets Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO174 ,CPU Targets Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO173 ,CPU Targets Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO172 ,CPU Targets Byte Offset 172 " group.long 0x8B0++0x03 line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO179 ,CPU Targets Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO178 ,CPU Targets Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO177 ,CPU Targets Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO176 ,CPU Targets Byte Offset 176 " group.long 0x8B4++0x03 line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO183 ,CPU Targets Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO182 ,CPU Targets Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO181 ,CPU Targets Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO180 ,CPU Targets Byte Offset 180 " group.long 0x8B8++0x03 line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO187 ,CPU Targets Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO186 ,CPU Targets Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO185 ,CPU Targets Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO184 ,CPU Targets Byte Offset 184 " group.long 0x8BC++0x03 line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO191 ,CPU Targets Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO190 ,CPU Targets Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO189 ,CPU Targets Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO188 ,CPU Targets Byte Offset 188 " else rgroup.long 0x8A0++0x03 line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" rgroup.long 0x8A4++0x03 line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" rgroup.long 0x8A8++0x03 line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" rgroup.long 0x8AC++0x03 line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" rgroup.long 0x8B0++0x03 line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" rgroup.long 0x8B4++0x03 line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" rgroup.long 0x8B8++0x03 line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" rgroup.long 0x8BC++0x03 line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) group.long 0x8C0++0x03 line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO195 ,CPU Targets Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO194 ,CPU Targets Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO193 ,CPU Targets Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO192 ,CPU Targets Byte Offset 192 " group.long 0x8C4++0x03 line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO199 ,CPU Targets Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO198 ,CPU Targets Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO197 ,CPU Targets Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO196 ,CPU Targets Byte Offset 196 " group.long 0x8C8++0x03 line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO203 ,CPU Targets Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO202 ,CPU Targets Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO201 ,CPU Targets Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO200 ,CPU Targets Byte Offset 200 " group.long 0x8CC++0x03 line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO207 ,CPU Targets Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO206 ,CPU Targets Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO205 ,CPU Targets Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO204 ,CPU Targets Byte Offset 204 " group.long 0x8D0++0x03 line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO211 ,CPU Targets Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO210 ,CPU Targets Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO209 ,CPU Targets Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO208 ,CPU Targets Byte Offset 208 " group.long 0x8D4++0x03 line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO215 ,CPU Targets Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO214 ,CPU Targets Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO213 ,CPU Targets Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO212 ,CPU Targets Byte Offset 212 " group.long 0x8D8++0x03 line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO219 ,CPU Targets Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO218 ,CPU Targets Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO217 ,CPU Targets Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO216 ,CPU Targets Byte Offset 216 " group.long 0x8DC++0x03 line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO223 ,CPU Targets Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO222 ,CPU Targets Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO221 ,CPU Targets Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO220 ,CPU Targets Byte Offset 220 " else rgroup.long 0x8C0++0x03 line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" rgroup.long 0x8C4++0x03 line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" rgroup.long 0x8C8++0x03 line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" rgroup.long 0x8CC++0x03 line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" rgroup.long 0x8D0++0x03 line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" rgroup.long 0x8D4++0x03 line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" rgroup.long 0x8D8++0x03 line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" rgroup.long 0x8DC++0x03 line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) group.long 0x8E0++0x03 line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO227 ,CPU Targets Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO226 ,CPU Targets Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO225 ,CPU Targets Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO224 ,CPU Targets Byte Offset 224 " group.long 0x8E4++0x03 line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO231 ,CPU Targets Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO230 ,CPU Targets Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO229 ,CPU Targets Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO228 ,CPU Targets Byte Offset 228 " group.long 0x8E8++0x03 line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO235 ,CPU Targets Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO234 ,CPU Targets Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO233 ,CPU Targets Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO232 ,CPU Targets Byte Offset 232 " group.long 0x8EC++0x03 line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO239 ,CPU Targets Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO238 ,CPU Targets Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO237 ,CPU Targets Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO236 ,CPU Targets Byte Offset 236 " group.long 0x8F0++0x03 line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO243 ,CPU Targets Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO242 ,CPU Targets Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO241 ,CPU Targets Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO240 ,CPU Targets Byte Offset 240 " group.long 0x8F4++0x03 line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO247 ,CPU Targets Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO246 ,CPU Targets Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO245 ,CPU Targets Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO244 ,CPU Targets Byte Offset 244 " group.long 0x8F8++0x03 line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO251 ,CPU Targets Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO250 ,CPU Targets Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO249 ,CPU Targets Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO248 ,CPU Targets Byte Offset 248 " group.long 0x8FC++0x03 line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO255 ,CPU Targets Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO254 ,CPU Targets Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO253 ,CPU Targets Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO252 ,CPU Targets Byte Offset 252 " else rgroup.long 0x8E0++0x03 line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" rgroup.long 0x8E4++0x03 line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" rgroup.long 0x8E8++0x03 line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" rgroup.long 0x8EC++0x03 line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" rgroup.long 0x8F0++0x03 line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" rgroup.long 0x8F4++0x03 line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" rgroup.long 0x8F8++0x03 line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" rgroup.long 0x8FC++0x03 line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) group.long 0x900++0x03 line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO259 ,CPU Targets Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO258 ,CPU Targets Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO257 ,CPU Targets Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO256 ,CPU Targets Byte Offset 256 " group.long 0x904++0x03 line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO263 ,CPU Targets Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO262 ,CPU Targets Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO261 ,CPU Targets Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO260 ,CPU Targets Byte Offset 260 " group.long 0x908++0x03 line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO267 ,CPU Targets Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO266 ,CPU Targets Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO265 ,CPU Targets Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO264 ,CPU Targets Byte Offset 264 " group.long 0x90C++0x03 line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO271 ,CPU Targets Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO270 ,CPU Targets Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO269 ,CPU Targets Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO268 ,CPU Targets Byte Offset 268 " group.long 0x910++0x03 line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO275 ,CPU Targets Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO274 ,CPU Targets Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO273 ,CPU Targets Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO272 ,CPU Targets Byte Offset 272 " group.long 0x914++0x03 line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO279 ,CPU Targets Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO278 ,CPU Targets Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO277 ,CPU Targets Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO276 ,CPU Targets Byte Offset 276 " group.long 0x918++0x03 line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO283 ,CPU Targets Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO282 ,CPU Targets Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO281 ,CPU Targets Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO280 ,CPU Targets Byte Offset 280 " group.long 0x91C++0x03 line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO287 ,CPU Targets Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO286 ,CPU Targets Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO285 ,CPU Targets Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO284 ,CPU Targets Byte Offset 284 " else rgroup.long 0x900++0x03 line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" rgroup.long 0x904++0x03 line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" rgroup.long 0x908++0x03 line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" rgroup.long 0x90C++0x03 line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" rgroup.long 0x910++0x03 line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" rgroup.long 0x914++0x03 line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" rgroup.long 0x918++0x03 line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" rgroup.long 0x91C++0x03 line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) group.long 0x920++0x03 line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO291 ,CPU Targets Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO290 ,CPU Targets Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO289 ,CPU Targets Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO288 ,CPU Targets Byte Offset 288 " group.long 0x924++0x03 line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO295 ,CPU Targets Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO294 ,CPU Targets Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO293 ,CPU Targets Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO292 ,CPU Targets Byte Offset 292 " group.long 0x928++0x03 line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO299 ,CPU Targets Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO298 ,CPU Targets Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO297 ,CPU Targets Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO296 ,CPU Targets Byte Offset 296 " group.long 0x92C++0x03 line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO303 ,CPU Targets Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO302 ,CPU Targets Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO301 ,CPU Targets Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO300 ,CPU Targets Byte Offset 300 " group.long 0x930++0x03 line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO307 ,CPU Targets Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO306 ,CPU Targets Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO305 ,CPU Targets Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO304 ,CPU Targets Byte Offset 304 " group.long 0x934++0x03 line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO311 ,CPU Targets Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO310 ,CPU Targets Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO309 ,CPU Targets Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO308 ,CPU Targets Byte Offset 308 " group.long 0x938++0x03 line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO315 ,CPU Targets Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO314 ,CPU Targets Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO313 ,CPU Targets Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO312 ,CPU Targets Byte Offset 312 " group.long 0x93C++0x03 line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO319 ,CPU Targets Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO318 ,CPU Targets Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO317 ,CPU Targets Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO316 ,CPU Targets Byte Offset 316 " else rgroup.long 0x920++0x03 line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" rgroup.long 0x924++0x03 line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" rgroup.long 0x928++0x03 line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" rgroup.long 0x92C++0x03 line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" rgroup.long 0x930++0x03 line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" rgroup.long 0x934++0x03 line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" rgroup.long 0x938++0x03 line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" rgroup.long 0x93C++0x03 line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) group.long 0x940++0x03 line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO323 ,CPU Targets Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO322 ,CPU Targets Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO321 ,CPU Targets Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO320 ,CPU Targets Byte Offset 320 " group.long 0x944++0x03 line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO327 ,CPU Targets Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO326 ,CPU Targets Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO325 ,CPU Targets Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO324 ,CPU Targets Byte Offset 324 " group.long 0x948++0x03 line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO331 ,CPU Targets Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO330 ,CPU Targets Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO329 ,CPU Targets Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO328 ,CPU Targets Byte Offset 328 " group.long 0x94C++0x03 line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO335 ,CPU Targets Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO334 ,CPU Targets Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO333 ,CPU Targets Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO332 ,CPU Targets Byte Offset 332 " group.long 0x950++0x03 line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO339 ,CPU Targets Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO338 ,CPU Targets Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO337 ,CPU Targets Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO336 ,CPU Targets Byte Offset 336 " group.long 0x954++0x03 line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO343 ,CPU Targets Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO342 ,CPU Targets Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO341 ,CPU Targets Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO340 ,CPU Targets Byte Offset 340 " group.long 0x958++0x03 line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO347 ,CPU Targets Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO346 ,CPU Targets Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO345 ,CPU Targets Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO344 ,CPU Targets Byte Offset 344 " group.long 0x95C++0x03 line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO351 ,CPU Targets Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO350 ,CPU Targets Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO349 ,CPU Targets Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO348 ,CPU Targets Byte Offset 348 " else rgroup.long 0x940++0x03 line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" rgroup.long 0x944++0x03 line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" rgroup.long 0x948++0x03 line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" rgroup.long 0x94C++0x03 line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" rgroup.long 0x950++0x03 line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" rgroup.long 0x954++0x03 line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" rgroup.long 0x958++0x03 line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" rgroup.long 0x95C++0x03 line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) group.long 0x960++0x03 line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO355 ,CPU Targets Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO354 ,CPU Targets Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO353 ,CPU Targets Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO352 ,CPU Targets Byte Offset 352 " group.long 0x964++0x03 line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO359 ,CPU Targets Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO358 ,CPU Targets Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO357 ,CPU Targets Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO356 ,CPU Targets Byte Offset 356 " group.long 0x968++0x03 line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO363 ,CPU Targets Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO362 ,CPU Targets Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO361 ,CPU Targets Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO360 ,CPU Targets Byte Offset 360 " group.long 0x96C++0x03 line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO367 ,CPU Targets Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO366 ,CPU Targets Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO365 ,CPU Targets Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO364 ,CPU Targets Byte Offset 364 " group.long 0x970++0x03 line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO371 ,CPU Targets Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO370 ,CPU Targets Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO369 ,CPU Targets Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO368 ,CPU Targets Byte Offset 368 " group.long 0x974++0x03 line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO375 ,CPU Targets Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO374 ,CPU Targets Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO373 ,CPU Targets Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO372 ,CPU Targets Byte Offset 372 " group.long 0x978++0x03 line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO379 ,CPU Targets Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO378 ,CPU Targets Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO377 ,CPU Targets Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO376 ,CPU Targets Byte Offset 376 " group.long 0x97C++0x03 line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO383 ,CPU Targets Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO382 ,CPU Targets Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO381 ,CPU Targets Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO380 ,CPU Targets Byte Offset 380 " else rgroup.long 0x960++0x03 line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" rgroup.long 0x964++0x03 line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" rgroup.long 0x968++0x03 line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" rgroup.long 0x96C++0x03 line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" rgroup.long 0x970++0x03 line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" rgroup.long 0x974++0x03 line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" rgroup.long 0x978++0x03 line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" rgroup.long 0x97C++0x03 line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) group.long 0x980++0x03 line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO387 ,CPU Targets Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO386 ,CPU Targets Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO385 ,CPU Targets Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO384 ,CPU Targets Byte Offset 384 " group.long 0x984++0x03 line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO391 ,CPU Targets Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO390 ,CPU Targets Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO389 ,CPU Targets Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO388 ,CPU Targets Byte Offset 388 " group.long 0x988++0x03 line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO395 ,CPU Targets Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO394 ,CPU Targets Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO393 ,CPU Targets Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO392 ,CPU Targets Byte Offset 392 " group.long 0x98C++0x03 line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO399 ,CPU Targets Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO398 ,CPU Targets Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO397 ,CPU Targets Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO396 ,CPU Targets Byte Offset 396 " group.long 0x990++0x03 line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO403 ,CPU Targets Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO402 ,CPU Targets Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO401 ,CPU Targets Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO400 ,CPU Targets Byte Offset 400 " group.long 0x994++0x03 line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO407 ,CPU Targets Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO406 ,CPU Targets Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO405 ,CPU Targets Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO404 ,CPU Targets Byte Offset 404 " group.long 0x998++0x03 line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO411 ,CPU Targets Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO410 ,CPU Targets Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO409 ,CPU Targets Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO408 ,CPU Targets Byte Offset 408 " group.long 0x99C++0x03 line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO415 ,CPU Targets Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO414 ,CPU Targets Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO413 ,CPU Targets Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO412 ,CPU Targets Byte Offset 412 " else rgroup.long 0x980++0x03 line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" rgroup.long 0x984++0x03 line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" rgroup.long 0x988++0x03 line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" rgroup.long 0x98C++0x03 line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" rgroup.long 0x990++0x03 line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" rgroup.long 0x994++0x03 line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" rgroup.long 0x998++0x03 line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" rgroup.long 0x99C++0x03 line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) group.long 0x9A0++0x03 line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO419 ,CPU Targets Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO418 ,CPU Targets Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO417 ,CPU Targets Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO416 ,CPU Targets Byte Offset 416 " group.long 0x9A4++0x03 line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO423 ,CPU Targets Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO422 ,CPU Targets Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO421 ,CPU Targets Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO420 ,CPU Targets Byte Offset 420 " group.long 0x9A8++0x03 line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO427 ,CPU Targets Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO426 ,CPU Targets Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO425 ,CPU Targets Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO424 ,CPU Targets Byte Offset 424 " group.long 0x9AC++0x03 line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO431 ,CPU Targets Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO430 ,CPU Targets Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO429 ,CPU Targets Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO428 ,CPU Targets Byte Offset 428 " group.long 0x9B0++0x03 line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO435 ,CPU Targets Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO434 ,CPU Targets Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO433 ,CPU Targets Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO432 ,CPU Targets Byte Offset 432 " group.long 0x9B4++0x03 line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO439 ,CPU Targets Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO438 ,CPU Targets Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO437 ,CPU Targets Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO436 ,CPU Targets Byte Offset 436 " group.long 0x9B8++0x03 line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO443 ,CPU Targets Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO442 ,CPU Targets Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO441 ,CPU Targets Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO440 ,CPU Targets Byte Offset 440 " group.long 0x9BC++0x03 line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO447 ,CPU Targets Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO446 ,CPU Targets Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO445 ,CPU Targets Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO444 ,CPU Targets Byte Offset 444 " else rgroup.long 0x9A0++0x03 line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" rgroup.long 0x9A4++0x03 line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" rgroup.long 0x9A8++0x03 line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" rgroup.long 0x9AC++0x03 line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" rgroup.long 0x9B0++0x03 line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" rgroup.long 0x9B4++0x03 line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" rgroup.long 0x9B8++0x03 line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" rgroup.long 0x9BC++0x03 line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) group.long 0x9C0++0x03 line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO451 ,CPU Targets Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO450 ,CPU Targets Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO449 ,CPU Targets Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO448 ,CPU Targets Byte Offset 448 " group.long 0x9C4++0x03 line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO455 ,CPU Targets Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO454 ,CPU Targets Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO453 ,CPU Targets Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO452 ,CPU Targets Byte Offset 452 " group.long 0x9C8++0x03 line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO459 ,CPU Targets Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO458 ,CPU Targets Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO457 ,CPU Targets Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO456 ,CPU Targets Byte Offset 456 " group.long 0x9CC++0x03 line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO463 ,CPU Targets Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO462 ,CPU Targets Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO461 ,CPU Targets Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO460 ,CPU Targets Byte Offset 460 " group.long 0x9D0++0x03 line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO467 ,CPU Targets Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO466 ,CPU Targets Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO465 ,CPU Targets Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO464 ,CPU Targets Byte Offset 464 " group.long 0x9D4++0x03 line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO471 ,CPU Targets Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO470 ,CPU Targets Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO469 ,CPU Targets Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO468 ,CPU Targets Byte Offset 468 " group.long 0x9D8++0x03 line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO475 ,CPU Targets Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO474 ,CPU Targets Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO473 ,CPU Targets Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO472 ,CPU Targets Byte Offset 472 " group.long 0x9DC++0x03 line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO479 ,CPU Targets Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO478 ,CPU Targets Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO477 ,CPU Targets Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO476 ,CPU Targets Byte Offset 476 " else rgroup.long 0x9C0++0x03 line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" rgroup.long 0x9C4++0x03 line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" rgroup.long 0x9C8++0x03 line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" rgroup.long 0x9CC++0x03 line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" rgroup.long 0x9D0++0x03 line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" rgroup.long 0x9D4++0x03 line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" rgroup.long 0x9D8++0x03 line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" rgroup.long 0x9DC++0x03 line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) group.long 0x9E0++0x03 line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO483 ,CPU Targets Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO482 ,CPU Targets Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO481 ,CPU Targets Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO480 ,CPU Targets Byte Offset 480 " group.long 0x9E4++0x03 line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO487 ,CPU Targets Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO486 ,CPU Targets Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO485 ,CPU Targets Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO484 ,CPU Targets Byte Offset 484 " group.long 0x9E8++0x03 line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO491 ,CPU Targets Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO490 ,CPU Targets Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO489 ,CPU Targets Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO488 ,CPU Targets Byte Offset 488 " group.long 0x9EC++0x03 line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO495 ,CPU Targets Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO494 ,CPU Targets Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO493 ,CPU Targets Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO492 ,CPU Targets Byte Offset 492 " group.long 0x9F0++0x03 line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO499 ,CPU Targets Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO498 ,CPU Targets Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO497 ,CPU Targets Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO496 ,CPU Targets Byte Offset 496 " group.long 0x9F4++0x03 line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO503 ,CPU Targets Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO502 ,CPU Targets Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO501 ,CPU Targets Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO500 ,CPU Targets Byte Offset 500 " group.long 0x9F8++0x03 line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO507 ,CPU Targets Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO506 ,CPU Targets Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO505 ,CPU Targets Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO504 ,CPU Targets Byte Offset 504 " group.long 0x9FC++0x03 line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO511 ,CPU Targets Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO510 ,CPU Targets Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO509 ,CPU Targets Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO508 ,CPU Targets Byte Offset 508 " else rgroup.long 0x9E0++0x03 line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" rgroup.long 0x9E4++0x03 line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" rgroup.long 0x9E8++0x03 line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" rgroup.long 0x9EC++0x03 line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" rgroup.long 0x9F0++0x03 line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" rgroup.long 0x9F4++0x03 line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" rgroup.long 0x9F8++0x03 line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" rgroup.long 0x9FC++0x03 line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) group.long 0xA00++0x03 line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO515 ,CPU Targets Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO514 ,CPU Targets Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO513 ,CPU Targets Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO512 ,CPU Targets Byte Offset 512 " group.long 0xA04++0x03 line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO519 ,CPU Targets Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO518 ,CPU Targets Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO517 ,CPU Targets Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO516 ,CPU Targets Byte Offset 516 " group.long 0xA08++0x03 line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO523 ,CPU Targets Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO522 ,CPU Targets Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO521 ,CPU Targets Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO520 ,CPU Targets Byte Offset 520 " group.long 0xA0C++0x03 line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO527 ,CPU Targets Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO526 ,CPU Targets Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO525 ,CPU Targets Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO524 ,CPU Targets Byte Offset 524 " group.long 0xA10++0x03 line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO531 ,CPU Targets Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO530 ,CPU Targets Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO529 ,CPU Targets Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO528 ,CPU Targets Byte Offset 528 " group.long 0xA14++0x03 line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO535 ,CPU Targets Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO534 ,CPU Targets Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO533 ,CPU Targets Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO532 ,CPU Targets Byte Offset 532 " group.long 0xA18++0x03 line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO539 ,CPU Targets Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO538 ,CPU Targets Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO537 ,CPU Targets Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO536 ,CPU Targets Byte Offset 536 " group.long 0xA1C++0x03 line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO543 ,CPU Targets Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO542 ,CPU Targets Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO541 ,CPU Targets Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO540 ,CPU Targets Byte Offset 540 " else rgroup.long 0xA00++0x03 line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" rgroup.long 0xA04++0x03 line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" rgroup.long 0xA08++0x03 line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" rgroup.long 0xA0C++0x03 line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" rgroup.long 0xA10++0x03 line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" rgroup.long 0xA14++0x03 line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" rgroup.long 0xA18++0x03 line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" rgroup.long 0xA1C++0x03 line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) group.long 0xA20++0x03 line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO547 ,CPU Targets Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO546 ,CPU Targets Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO545 ,CPU Targets Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO544 ,CPU Targets Byte Offset 544 " group.long 0xA24++0x03 line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO551 ,CPU Targets Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO550 ,CPU Targets Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO549 ,CPU Targets Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO548 ,CPU Targets Byte Offset 548 " group.long 0xA28++0x03 line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO555 ,CPU Targets Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO554 ,CPU Targets Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO553 ,CPU Targets Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO552 ,CPU Targets Byte Offset 552 " group.long 0xA2C++0x03 line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO559 ,CPU Targets Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO558 ,CPU Targets Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO557 ,CPU Targets Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO556 ,CPU Targets Byte Offset 556 " group.long 0xA30++0x03 line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO563 ,CPU Targets Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO562 ,CPU Targets Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO561 ,CPU Targets Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO560 ,CPU Targets Byte Offset 560 " group.long 0xA34++0x03 line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO567 ,CPU Targets Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO566 ,CPU Targets Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO565 ,CPU Targets Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO564 ,CPU Targets Byte Offset 564 " group.long 0xA38++0x03 line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO571 ,CPU Targets Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO570 ,CPU Targets Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO569 ,CPU Targets Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO568 ,CPU Targets Byte Offset 568 " group.long 0xA3C++0x03 line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO575 ,CPU Targets Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO574 ,CPU Targets Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO573 ,CPU Targets Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO572 ,CPU Targets Byte Offset 572 " else rgroup.long 0xA20++0x03 line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" rgroup.long 0xA24++0x03 line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" rgroup.long 0xA28++0x03 line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" rgroup.long 0xA2C++0x03 line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" rgroup.long 0xA30++0x03 line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" rgroup.long 0xA34++0x03 line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" rgroup.long 0xA38++0x03 line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" rgroup.long 0xA3C++0x03 line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) group.long 0xA40++0x03 line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO579 ,CPU Targets Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO578 ,CPU Targets Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO577 ,CPU Targets Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO576 ,CPU Targets Byte Offset 576 " group.long 0xA44++0x03 line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO583 ,CPU Targets Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO582 ,CPU Targets Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO581 ,CPU Targets Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO580 ,CPU Targets Byte Offset 580 " group.long 0xA48++0x03 line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO587 ,CPU Targets Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO586 ,CPU Targets Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO585 ,CPU Targets Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO584 ,CPU Targets Byte Offset 584 " group.long 0xA4C++0x03 line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO591 ,CPU Targets Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO590 ,CPU Targets Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO589 ,CPU Targets Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO588 ,CPU Targets Byte Offset 588 " group.long 0xA50++0x03 line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO595 ,CPU Targets Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO594 ,CPU Targets Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO593 ,CPU Targets Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO592 ,CPU Targets Byte Offset 592 " group.long 0xA54++0x03 line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO599 ,CPU Targets Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO598 ,CPU Targets Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO597 ,CPU Targets Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO596 ,CPU Targets Byte Offset 596 " group.long 0xA58++0x03 line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO603 ,CPU Targets Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO602 ,CPU Targets Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO601 ,CPU Targets Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO600 ,CPU Targets Byte Offset 600 " group.long 0xA5C++0x03 line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO607 ,CPU Targets Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO606 ,CPU Targets Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO605 ,CPU Targets Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO604 ,CPU Targets Byte Offset 604 " else rgroup.long 0xA40++0x03 line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" rgroup.long 0xA44++0x03 line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" rgroup.long 0xA48++0x03 line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" rgroup.long 0xA4C++0x03 line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" rgroup.long 0xA50++0x03 line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" rgroup.long 0xA54++0x03 line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" rgroup.long 0xA58++0x03 line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" rgroup.long 0xA5C++0x03 line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) group.long 0xA60++0x03 line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO611 ,CPU Targets Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO610 ,CPU Targets Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO609 ,CPU Targets Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO608 ,CPU Targets Byte Offset 608 " group.long 0xA64++0x03 line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO615 ,CPU Targets Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO614 ,CPU Targets Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO613 ,CPU Targets Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO612 ,CPU Targets Byte Offset 612 " group.long 0xA68++0x03 line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO619 ,CPU Targets Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO618 ,CPU Targets Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO617 ,CPU Targets Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO616 ,CPU Targets Byte Offset 616 " group.long 0xA6C++0x03 line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO623 ,CPU Targets Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO622 ,CPU Targets Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO621 ,CPU Targets Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO620 ,CPU Targets Byte Offset 620 " group.long 0xA70++0x03 line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO627 ,CPU Targets Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO626 ,CPU Targets Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO625 ,CPU Targets Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO624 ,CPU Targets Byte Offset 624 " group.long 0xA74++0x03 line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO631 ,CPU Targets Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO630 ,CPU Targets Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO629 ,CPU Targets Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO628 ,CPU Targets Byte Offset 628 " group.long 0xA78++0x03 line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO635 ,CPU Targets Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO634 ,CPU Targets Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO633 ,CPU Targets Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO632 ,CPU Targets Byte Offset 632 " group.long 0xA7C++0x03 line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO639 ,CPU Targets Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO638 ,CPU Targets Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO637 ,CPU Targets Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO636 ,CPU Targets Byte Offset 636 " else rgroup.long 0xA60++0x03 line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" rgroup.long 0xA64++0x03 line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" rgroup.long 0xA68++0x03 line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" rgroup.long 0xA6C++0x03 line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" rgroup.long 0xA70++0x03 line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" rgroup.long 0xA74++0x03 line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" rgroup.long 0xA78++0x03 line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" rgroup.long 0xA7C++0x03 line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) group.long 0xA80++0x03 line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO643 ,CPU Targets Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO642 ,CPU Targets Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO641 ,CPU Targets Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO640 ,CPU Targets Byte Offset 640 " group.long 0xA84++0x03 line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO647 ,CPU Targets Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO646 ,CPU Targets Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO645 ,CPU Targets Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO644 ,CPU Targets Byte Offset 644 " group.long 0xA88++0x03 line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO651 ,CPU Targets Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO650 ,CPU Targets Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO649 ,CPU Targets Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO648 ,CPU Targets Byte Offset 648 " group.long 0xA8C++0x03 line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO655 ,CPU Targets Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO654 ,CPU Targets Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO653 ,CPU Targets Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO652 ,CPU Targets Byte Offset 652 " group.long 0xA90++0x03 line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO659 ,CPU Targets Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO658 ,CPU Targets Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO657 ,CPU Targets Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO656 ,CPU Targets Byte Offset 656 " group.long 0xA94++0x03 line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO663 ,CPU Targets Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO662 ,CPU Targets Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO661 ,CPU Targets Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO660 ,CPU Targets Byte Offset 660 " group.long 0xA98++0x03 line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO667 ,CPU Targets Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO666 ,CPU Targets Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO665 ,CPU Targets Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO664 ,CPU Targets Byte Offset 664 " group.long 0xA9C++0x03 line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO671 ,CPU Targets Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO670 ,CPU Targets Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO669 ,CPU Targets Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO668 ,CPU Targets Byte Offset 668 " else rgroup.long 0xA80++0x03 line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" rgroup.long 0xA84++0x03 line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" rgroup.long 0xA88++0x03 line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" rgroup.long 0xA8C++0x03 line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" rgroup.long 0xA90++0x03 line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" rgroup.long 0xA94++0x03 line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" rgroup.long 0xA98++0x03 line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" rgroup.long 0xA9C++0x03 line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) group.long 0xAA0++0x03 line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO675 ,CPU Targets Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO674 ,CPU Targets Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO673 ,CPU Targets Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO672 ,CPU Targets Byte Offset 672 " group.long 0xAA4++0x03 line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO679 ,CPU Targets Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO678 ,CPU Targets Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO677 ,CPU Targets Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO676 ,CPU Targets Byte Offset 676 " group.long 0xAA8++0x03 line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO683 ,CPU Targets Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO682 ,CPU Targets Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO681 ,CPU Targets Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO680 ,CPU Targets Byte Offset 680 " group.long 0xAAC++0x03 line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO687 ,CPU Targets Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO686 ,CPU Targets Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO685 ,CPU Targets Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO684 ,CPU Targets Byte Offset 684 " group.long 0xAB0++0x03 line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO691 ,CPU Targets Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO690 ,CPU Targets Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO689 ,CPU Targets Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO688 ,CPU Targets Byte Offset 688 " group.long 0xAB4++0x03 line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO695 ,CPU Targets Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO694 ,CPU Targets Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO693 ,CPU Targets Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO692 ,CPU Targets Byte Offset 692 " group.long 0xAB8++0x03 line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO699 ,CPU Targets Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO698 ,CPU Targets Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO697 ,CPU Targets Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO696 ,CPU Targets Byte Offset 696 " group.long 0xABC++0x03 line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO703 ,CPU Targets Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO702 ,CPU Targets Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO701 ,CPU Targets Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO700 ,CPU Targets Byte Offset 700 " else rgroup.long 0xAA0++0x03 line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" rgroup.long 0xAA4++0x03 line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" rgroup.long 0xAA8++0x03 line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" rgroup.long 0xAAC++0x03 line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" rgroup.long 0xAB0++0x03 line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" rgroup.long 0xAB4++0x03 line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" rgroup.long 0xAB8++0x03 line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" rgroup.long 0xABC++0x03 line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) group.long 0xAC0++0x03 line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO707 ,CPU Targets Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO706 ,CPU Targets Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO705 ,CPU Targets Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO704 ,CPU Targets Byte Offset 704 " group.long 0xAC4++0x03 line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO711 ,CPU Targets Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO710 ,CPU Targets Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO709 ,CPU Targets Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO708 ,CPU Targets Byte Offset 708 " group.long 0xAC8++0x03 line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO715 ,CPU Targets Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO714 ,CPU Targets Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO713 ,CPU Targets Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO712 ,CPU Targets Byte Offset 712 " group.long 0xACC++0x03 line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO719 ,CPU Targets Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO718 ,CPU Targets Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO717 ,CPU Targets Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO716 ,CPU Targets Byte Offset 716 " group.long 0xAD0++0x03 line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO723 ,CPU Targets Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO722 ,CPU Targets Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO721 ,CPU Targets Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO720 ,CPU Targets Byte Offset 720 " group.long 0xAD4++0x03 line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO727 ,CPU Targets Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO726 ,CPU Targets Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO725 ,CPU Targets Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO724 ,CPU Targets Byte Offset 724 " group.long 0xAD8++0x03 line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO731 ,CPU Targets Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO730 ,CPU Targets Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO729 ,CPU Targets Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO728 ,CPU Targets Byte Offset 728 " group.long 0xADC++0x03 line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO735 ,CPU Targets Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO734 ,CPU Targets Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO733 ,CPU Targets Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO732 ,CPU Targets Byte Offset 732 " else rgroup.long 0xAC0++0x03 line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" rgroup.long 0xAC4++0x03 line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" rgroup.long 0xAC8++0x03 line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" rgroup.long 0xACC++0x03 line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" rgroup.long 0xAD0++0x03 line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" rgroup.long 0xAD4++0x03 line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" rgroup.long 0xAD8++0x03 line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" rgroup.long 0xADC++0x03 line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) group.long 0xAE0++0x03 line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO739 ,CPU Targets Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO738 ,CPU Targets Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO737 ,CPU Targets Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO736 ,CPU Targets Byte Offset 736 " group.long 0xAE4++0x03 line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO743 ,CPU Targets Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO742 ,CPU Targets Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO741 ,CPU Targets Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO740 ,CPU Targets Byte Offset 740 " group.long 0xAE8++0x03 line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO747 ,CPU Targets Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO746 ,CPU Targets Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO745 ,CPU Targets Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO744 ,CPU Targets Byte Offset 744 " group.long 0xAEC++0x03 line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO751 ,CPU Targets Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO750 ,CPU Targets Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO749 ,CPU Targets Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO748 ,CPU Targets Byte Offset 748 " group.long 0xAF0++0x03 line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO755 ,CPU Targets Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO754 ,CPU Targets Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO753 ,CPU Targets Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO752 ,CPU Targets Byte Offset 752 " group.long 0xAF4++0x03 line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO759 ,CPU Targets Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO758 ,CPU Targets Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO757 ,CPU Targets Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO756 ,CPU Targets Byte Offset 756 " group.long 0xAF8++0x03 line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO763 ,CPU Targets Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO762 ,CPU Targets Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO761 ,CPU Targets Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO760 ,CPU Targets Byte Offset 760 " group.long 0xAFC++0x03 line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO767 ,CPU Targets Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO766 ,CPU Targets Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO765 ,CPU Targets Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO764 ,CPU Targets Byte Offset 764 " else rgroup.long 0xAE0++0x03 line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" rgroup.long 0xAE4++0x03 line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" rgroup.long 0xAE8++0x03 line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" rgroup.long 0xAEC++0x03 line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" rgroup.long 0xAF0++0x03 line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" rgroup.long 0xAF4++0x03 line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" rgroup.long 0xAF8++0x03 line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" rgroup.long 0xAFC++0x03 line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) group.long 0xB00++0x03 line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO771 ,CPU Targets Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO770 ,CPU Targets Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO769 ,CPU Targets Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO768 ,CPU Targets Byte Offset 768 " group.long 0xB04++0x03 line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO775 ,CPU Targets Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO774 ,CPU Targets Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO773 ,CPU Targets Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO772 ,CPU Targets Byte Offset 772 " group.long 0xB08++0x03 line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO779 ,CPU Targets Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO778 ,CPU Targets Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO777 ,CPU Targets Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO776 ,CPU Targets Byte Offset 776 " group.long 0xB0C++0x03 line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO783 ,CPU Targets Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO782 ,CPU Targets Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO781 ,CPU Targets Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO780 ,CPU Targets Byte Offset 780 " group.long 0xB10++0x03 line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO787 ,CPU Targets Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO786 ,CPU Targets Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO785 ,CPU Targets Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO784 ,CPU Targets Byte Offset 784 " group.long 0xB14++0x03 line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO791 ,CPU Targets Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO790 ,CPU Targets Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO789 ,CPU Targets Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO788 ,CPU Targets Byte Offset 788 " group.long 0xB18++0x03 line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO795 ,CPU Targets Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO794 ,CPU Targets Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO793 ,CPU Targets Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO792 ,CPU Targets Byte Offset 792 " group.long 0xB1C++0x03 line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO799 ,CPU Targets Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO798 ,CPU Targets Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO797 ,CPU Targets Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO796 ,CPU Targets Byte Offset 796 " else rgroup.long 0xB00++0x03 line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" rgroup.long 0xB04++0x03 line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" rgroup.long 0xB08++0x03 line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" rgroup.long 0xB0C++0x03 line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" rgroup.long 0xB10++0x03 line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" rgroup.long 0xB14++0x03 line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" rgroup.long 0xB18++0x03 line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" rgroup.long 0xB1C++0x03 line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) group.long 0xB20++0x03 line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO803 ,CPU Targets Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO802 ,CPU Targets Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO801 ,CPU Targets Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO800 ,CPU Targets Byte Offset 800 " group.long 0xB24++0x03 line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO807 ,CPU Targets Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO806 ,CPU Targets Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO805 ,CPU Targets Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO804 ,CPU Targets Byte Offset 804 " group.long 0xB28++0x03 line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO811 ,CPU Targets Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO810 ,CPU Targets Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO809 ,CPU Targets Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO808 ,CPU Targets Byte Offset 808 " group.long 0xB2C++0x03 line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO815 ,CPU Targets Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO814 ,CPU Targets Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO813 ,CPU Targets Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO812 ,CPU Targets Byte Offset 812 " group.long 0xB30++0x03 line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO819 ,CPU Targets Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO818 ,CPU Targets Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO817 ,CPU Targets Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO816 ,CPU Targets Byte Offset 816 " group.long 0xB34++0x03 line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO823 ,CPU Targets Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO822 ,CPU Targets Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO821 ,CPU Targets Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO820 ,CPU Targets Byte Offset 820 " group.long 0xB38++0x03 line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO827 ,CPU Targets Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO826 ,CPU Targets Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO825 ,CPU Targets Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO824 ,CPU Targets Byte Offset 824 " group.long 0xB3C++0x03 line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO831 ,CPU Targets Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO830 ,CPU Targets Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO829 ,CPU Targets Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO828 ,CPU Targets Byte Offset 828 " else rgroup.long 0xB20++0x03 line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" rgroup.long 0xB24++0x03 line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" rgroup.long 0xB28++0x03 line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" rgroup.long 0xB2C++0x03 line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" rgroup.long 0xB30++0x03 line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" rgroup.long 0xB34++0x03 line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" rgroup.long 0xB38++0x03 line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" rgroup.long 0xB3C++0x03 line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) group.long 0xB40++0x03 line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO835 ,CPU Targets Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO834 ,CPU Targets Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO833 ,CPU Targets Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO832 ,CPU Targets Byte Offset 832 " group.long 0xB44++0x03 line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO839 ,CPU Targets Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO838 ,CPU Targets Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO837 ,CPU Targets Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO836 ,CPU Targets Byte Offset 836 " group.long 0xB48++0x03 line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO843 ,CPU Targets Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO842 ,CPU Targets Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO841 ,CPU Targets Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO840 ,CPU Targets Byte Offset 840 " group.long 0xB4C++0x03 line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO847 ,CPU Targets Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO846 ,CPU Targets Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO845 ,CPU Targets Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO844 ,CPU Targets Byte Offset 844 " group.long 0xB50++0x03 line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO851 ,CPU Targets Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO850 ,CPU Targets Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO849 ,CPU Targets Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO848 ,CPU Targets Byte Offset 848 " group.long 0xB54++0x03 line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO855 ,CPU Targets Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO854 ,CPU Targets Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO853 ,CPU Targets Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO852 ,CPU Targets Byte Offset 852 " group.long 0xB58++0x03 line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO859 ,CPU Targets Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO858 ,CPU Targets Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO857 ,CPU Targets Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO856 ,CPU Targets Byte Offset 856 " group.long 0xB5C++0x03 line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO863 ,CPU Targets Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO862 ,CPU Targets Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO861 ,CPU Targets Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO860 ,CPU Targets Byte Offset 860 " else rgroup.long 0xB40++0x03 line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" rgroup.long 0xB44++0x03 line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" rgroup.long 0xB48++0x03 line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" rgroup.long 0xB4C++0x03 line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" rgroup.long 0xB50++0x03 line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" rgroup.long 0xB54++0x03 line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" rgroup.long 0xB58++0x03 line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" rgroup.long 0xB5C++0x03 line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) group.long 0xB60++0x03 line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO867 ,CPU Targets Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO866 ,CPU Targets Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO865 ,CPU Targets Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO864 ,CPU Targets Byte Offset 864 " group.long 0xB64++0x03 line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO871 ,CPU Targets Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO870 ,CPU Targets Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO869 ,CPU Targets Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO868 ,CPU Targets Byte Offset 868 " group.long 0xB68++0x03 line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO875 ,CPU Targets Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO874 ,CPU Targets Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO873 ,CPU Targets Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO872 ,CPU Targets Byte Offset 872 " group.long 0xB6C++0x03 line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO879 ,CPU Targets Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO878 ,CPU Targets Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO877 ,CPU Targets Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO876 ,CPU Targets Byte Offset 876 " group.long 0xB70++0x03 line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO883 ,CPU Targets Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO882 ,CPU Targets Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO881 ,CPU Targets Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO880 ,CPU Targets Byte Offset 880 " group.long 0xB74++0x03 line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO887 ,CPU Targets Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO886 ,CPU Targets Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO885 ,CPU Targets Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO884 ,CPU Targets Byte Offset 884 " group.long 0xB78++0x03 line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO891 ,CPU Targets Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO890 ,CPU Targets Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO889 ,CPU Targets Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO888 ,CPU Targets Byte Offset 888 " group.long 0xB7C++0x03 line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO895 ,CPU Targets Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO894 ,CPU Targets Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO893 ,CPU Targets Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO892 ,CPU Targets Byte Offset 892 " else rgroup.long 0xB60++0x03 line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" rgroup.long 0xB64++0x03 line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" rgroup.long 0xB68++0x03 line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" rgroup.long 0xB6C++0x03 line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" rgroup.long 0xB70++0x03 line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" rgroup.long 0xB74++0x03 line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" rgroup.long 0xB78++0x03 line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" rgroup.long 0xB7C++0x03 line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) group.long 0xB80++0x03 line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO899 ,CPU Targets Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO898 ,CPU Targets Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO897 ,CPU Targets Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO896 ,CPU Targets Byte Offset 896 " group.long 0xB84++0x03 line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO903 ,CPU Targets Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO902 ,CPU Targets Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO901 ,CPU Targets Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO900 ,CPU Targets Byte Offset 900 " group.long 0xB88++0x03 line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO907 ,CPU Targets Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO906 ,CPU Targets Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO905 ,CPU Targets Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO904 ,CPU Targets Byte Offset 904 " group.long 0xB8C++0x03 line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO911 ,CPU Targets Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO910 ,CPU Targets Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO909 ,CPU Targets Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO908 ,CPU Targets Byte Offset 908 " group.long 0xB90++0x03 line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO915 ,CPU Targets Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO914 ,CPU Targets Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO913 ,CPU Targets Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO912 ,CPU Targets Byte Offset 912 " group.long 0xB94++0x03 line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO919 ,CPU Targets Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO918 ,CPU Targets Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO917 ,CPU Targets Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO916 ,CPU Targets Byte Offset 916 " group.long 0xB98++0x03 line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO923 ,CPU Targets Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO922 ,CPU Targets Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO921 ,CPU Targets Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO920 ,CPU Targets Byte Offset 920 " group.long 0xB9C++0x03 line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO927 ,CPU Targets Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO926 ,CPU Targets Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO925 ,CPU Targets Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO924 ,CPU Targets Byte Offset 924 " else rgroup.long 0xB80++0x03 line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" rgroup.long 0xB84++0x03 line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" rgroup.long 0xB88++0x03 line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" rgroup.long 0xB8C++0x03 line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" rgroup.long 0xB90++0x03 line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" rgroup.long 0xB94++0x03 line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" rgroup.long 0xB98++0x03 line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" rgroup.long 0xB9C++0x03 line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) group.long 0xBA0++0x03 line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO931 ,CPU Targets Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO930 ,CPU Targets Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO929 ,CPU Targets Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO928 ,CPU Targets Byte Offset 928 " group.long 0xBA4++0x03 line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO935 ,CPU Targets Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO934 ,CPU Targets Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO933 ,CPU Targets Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO932 ,CPU Targets Byte Offset 932 " group.long 0xBA8++0x03 line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO939 ,CPU Targets Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO938 ,CPU Targets Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO937 ,CPU Targets Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO936 ,CPU Targets Byte Offset 936 " group.long 0xBAC++0x03 line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO943 ,CPU Targets Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO942 ,CPU Targets Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO941 ,CPU Targets Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO940 ,CPU Targets Byte Offset 940 " group.long 0xBB0++0x03 line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO947 ,CPU Targets Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO946 ,CPU Targets Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO945 ,CPU Targets Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO944 ,CPU Targets Byte Offset 944 " group.long 0xBB4++0x03 line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO951 ,CPU Targets Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO950 ,CPU Targets Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO949 ,CPU Targets Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO948 ,CPU Targets Byte Offset 948 " group.long 0xBB8++0x03 line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO955 ,CPU Targets Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO954 ,CPU Targets Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO953 ,CPU Targets Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO952 ,CPU Targets Byte Offset 952 " group.long 0xBBC++0x03 line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO959 ,CPU Targets Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO958 ,CPU Targets Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO957 ,CPU Targets Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO956 ,CPU Targets Byte Offset 956 " else rgroup.long 0xBA0++0x03 line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" rgroup.long 0xBA4++0x03 line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" rgroup.long 0xBA8++0x03 line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" rgroup.long 0xBAC++0x03 line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" rgroup.long 0xBB0++0x03 line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" rgroup.long 0xBB4++0x03 line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" rgroup.long 0xBB8++0x03 line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" rgroup.long 0xBBC++0x03 line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) group.long 0xBC0++0x03 line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO963 ,CPU Targets Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO962 ,CPU Targets Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO961 ,CPU Targets Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO960 ,CPU Targets Byte Offset 960 " group.long 0xBC4++0x03 line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO967 ,CPU Targets Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO966 ,CPU Targets Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO965 ,CPU Targets Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO964 ,CPU Targets Byte Offset 964 " group.long 0xBC8++0x03 line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO971 ,CPU Targets Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO970 ,CPU Targets Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO969 ,CPU Targets Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO968 ,CPU Targets Byte Offset 968 " group.long 0xBCC++0x03 line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO975 ,CPU Targets Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO974 ,CPU Targets Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO973 ,CPU Targets Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO972 ,CPU Targets Byte Offset 972 " group.long 0xBD0++0x03 line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO979 ,CPU Targets Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO978 ,CPU Targets Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO977 ,CPU Targets Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO976 ,CPU Targets Byte Offset 976 " group.long 0xBD4++0x03 line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO983 ,CPU Targets Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO982 ,CPU Targets Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO981 ,CPU Targets Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO980 ,CPU Targets Byte Offset 980 " group.long 0xBD8++0x03 line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO987 ,CPU Targets Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO986 ,CPU Targets Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO985 ,CPU Targets Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO984 ,CPU Targets Byte Offset 984 " group.long 0xBDC++0x03 line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO991 ,CPU Targets Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO990 ,CPU Targets Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO989 ,CPU Targets Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO988 ,CPU Targets Byte Offset 988 " else rgroup.long 0xBC0++0x03 line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" rgroup.long 0xBC4++0x03 line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" rgroup.long 0xBC8++0x03 line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" rgroup.long 0xBCC++0x03 line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" rgroup.long 0xBD0++0x03 line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" rgroup.long 0xBD4++0x03 line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" rgroup.long 0xBD8++0x03 line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" rgroup.long 0xBDC++0x03 line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1F) group.long 0xBE0++0x03 line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO995 ,CPU Targets Byte Offset 995 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO994 ,CPU Targets Byte Offset 994 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO993 ,CPU Targets Byte Offset 993 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO992 ,CPU Targets Byte Offset 992 " group.long 0xBE4++0x03 line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO999 ,CPU Targets Byte Offset 999 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO998 ,CPU Targets Byte Offset 998 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO997 ,CPU Targets Byte Offset 997 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO996 ,CPU Targets Byte Offset 996 " group.long 0xBE8++0x03 line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1003 ,CPU Targets Byte Offset 1003" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1002 ,CPU Targets Byte Offset 1002" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1001 ,CPU Targets Byte Offset 1001" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1000 ,CPU Targets Byte Offset 1000" group.long 0xBEC++0x03 line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1007 ,CPU Targets Byte Offset 1007" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1006 ,CPU Targets Byte Offset 1006" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1005 ,CPU Targets Byte Offset 1005" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1004 ,CPU Targets Byte Offset 1004" group.long 0xBF0++0x03 line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1011 ,CPU Targets Byte Offset 1011" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1010 ,CPU Targets Byte Offset 1010" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1009 ,CPU Targets Byte Offset 1009" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1008 ,CPU Targets Byte Offset 1008" group.long 0xBF4++0x03 line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1015 ,CPU Targets Byte Offset 1015" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1014 ,CPU Targets Byte Offset 1014" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1013 ,CPU Targets Byte Offset 1013" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1012 ,CPU Targets Byte Offset 1012" group.long 0xBF8++0x03 line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1019 ,CPU Targets Byte Offset 1019" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1018 ,CPU Targets Byte Offset 1018" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1017 ,CPU Targets Byte Offset 1017" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1016 ,CPU Targets Byte Offset 1016" else rgroup.long 0xBE0++0x03 line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" rgroup.long 0xBE4++0x03 line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" rgroup.long 0xBE8++0x03 line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" rgroup.long 0xBEC++0x03 line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" rgroup.long 0xBF0++0x03 line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" rgroup.long 0xBF4++0x03 line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" rgroup.long 0xBF8++0x03 line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" endif else rgroup.long 0x800++0x03 line.long 0x00 "GICD_ITARGETSR0 ,Interrupt Processor Targets Register 0 " rgroup.long 0x804++0x03 line.long 0x00 "GICD_ITARGETSR1 ,Interrupt Processor Targets Register 1 " rgroup.long 0x808++0x03 line.long 0x00 "GICD_ITARGETSR2 ,Interrupt Processor Targets Register 2 " rgroup.long 0x80C++0x03 line.long 0x00 "GICD_ITARGETSR3 ,Interrupt Processor Targets Register 3 " rgroup.long 0x810++0x03 line.long 0x00 "GICD_ITARGETSR4 ,Interrupt Processor Targets Register 4 " rgroup.long 0x814++0x03 line.long 0x00 "GICD_ITARGETSR5 ,Interrupt Processor Targets Register 5 " rgroup.long 0x818++0x03 line.long 0x00 "GICD_ITARGETSR6 ,Interrupt Processor Targets Register 6 " rgroup.long 0x81C++0x03 line.long 0x00 "GICD_ITARGETSR7 ,Interrupt Processor Targets Register 7 " rgroup.long 0x820++0x03 line.long 0x00 "GICD_ITARGETSR8 ,Interrupt Processor Targets Register 8 " rgroup.long 0x824++0x03 line.long 0x00 "GICD_ITARGETSR9 ,Interrupt Processor Targets Register 9 " rgroup.long 0x828++0x03 line.long 0x00 "GICD_ITARGETSR10 ,Interrupt Processor Targets Register 10 " rgroup.long 0x82C++0x03 line.long 0x00 "GICD_ITARGETSR11 ,Interrupt Processor Targets Register 11 " rgroup.long 0x830++0x03 line.long 0x00 "GICD_ITARGETSR12 ,Interrupt Processor Targets Register 12 " rgroup.long 0x834++0x03 line.long 0x00 "GICD_ITARGETSR13 ,Interrupt Processor Targets Register 13 " rgroup.long 0x838++0x03 line.long 0x00 "GICD_ITARGETSR14 ,Interrupt Processor Targets Register 14 " rgroup.long 0x83C++0x03 line.long 0x00 "GICD_ITARGETSR15 ,Interrupt Processor Targets Register 15 " rgroup.long 0x840++0x03 line.long 0x00 "GICD_ITARGETSR16 ,Interrupt Processor Targets Register 16 " rgroup.long 0x844++0x03 line.long 0x00 "GICD_ITARGETSR17 ,Interrupt Processor Targets Register 17 " rgroup.long 0x848++0x03 line.long 0x00 "GICD_ITARGETSR18 ,Interrupt Processor Targets Register 18 " rgroup.long 0x84C++0x03 line.long 0x00 "GICD_ITARGETSR19 ,Interrupt Processor Targets Register 19 " rgroup.long 0x850++0x03 line.long 0x00 "GICD_ITARGETSR20 ,Interrupt Processor Targets Register 20 " rgroup.long 0x854++0x03 line.long 0x00 "GICD_ITARGETSR21 ,Interrupt Processor Targets Register 21 " rgroup.long 0x858++0x03 line.long 0x00 "GICD_ITARGETSR22 ,Interrupt Processor Targets Register 22 " rgroup.long 0x85C++0x03 line.long 0x00 "GICD_ITARGETSR23 ,Interrupt Processor Targets Register 23 " rgroup.long 0x860++0x03 line.long 0x00 "GICD_ITARGETSR24 ,Interrupt Processor Targets Register 24 " rgroup.long 0x864++0x03 line.long 0x00 "GICD_ITARGETSR25 ,Interrupt Processor Targets Register 25 " rgroup.long 0x868++0x03 line.long 0x00 "GICD_ITARGETSR26 ,Interrupt Processor Targets Register 26 " rgroup.long 0x86C++0x03 line.long 0x00 "GICD_ITARGETSR27 ,Interrupt Processor Targets Register 27 " rgroup.long 0x870++0x03 line.long 0x00 "GICD_ITARGETSR28 ,Interrupt Processor Targets Register 28 " rgroup.long 0x874++0x03 line.long 0x00 "GICD_ITARGETSR29 ,Interrupt Processor Targets Register 29 " rgroup.long 0x878++0x03 line.long 0x00 "GICD_ITARGETSR30 ,Interrupt Processor Targets Register 30 " rgroup.long 0x87C++0x03 line.long 0x00 "GICD_ITARGETSR31 ,Interrupt Processor Targets Register 31 " rgroup.long 0x880++0x03 line.long 0x00 "GICD_ITARGETSR32 ,Interrupt Processor Targets Register 32 " rgroup.long 0x884++0x03 line.long 0x00 "GICD_ITARGETSR33 ,Interrupt Processor Targets Register 33 " rgroup.long 0x888++0x03 line.long 0x00 "GICD_ITARGETSR34 ,Interrupt Processor Targets Register 34 " rgroup.long 0x88C++0x03 line.long 0x00 "GICD_ITARGETSR35 ,Interrupt Processor Targets Register 35 " rgroup.long 0x890++0x03 line.long 0x00 "GICD_ITARGETSR36 ,Interrupt Processor Targets Register 36 " rgroup.long 0x894++0x03 line.long 0x00 "GICD_ITARGETSR37 ,Interrupt Processor Targets Register 37 " rgroup.long 0x898++0x03 line.long 0x00 "GICD_ITARGETSR38 ,Interrupt Processor Targets Register 38 " rgroup.long 0x89C++0x03 line.long 0x00 "GICD_ITARGETSR39 ,Interrupt Processor Targets Register 39 " rgroup.long 0x8A0++0x03 line.long 0x00 "GICD_ITARGETSR40 ,Interrupt Processor Targets Register 40 " rgroup.long 0x8A4++0x03 line.long 0x00 "GICD_ITARGETSR41 ,Interrupt Processor Targets Register 41 " rgroup.long 0x8A8++0x03 line.long 0x00 "GICD_ITARGETSR42 ,Interrupt Processor Targets Register 42 " rgroup.long 0x8AC++0x03 line.long 0x00 "GICD_ITARGETSR43 ,Interrupt Processor Targets Register 43 " rgroup.long 0x8B0++0x03 line.long 0x00 "GICD_ITARGETSR44 ,Interrupt Processor Targets Register 44 " rgroup.long 0x8B4++0x03 line.long 0x00 "GICD_ITARGETSR45 ,Interrupt Processor Targets Register 45 " rgroup.long 0x8B8++0x03 line.long 0x00 "GICD_ITARGETSR46 ,Interrupt Processor Targets Register 46 " rgroup.long 0x8BC++0x03 line.long 0x00 "GICD_ITARGETSR47 ,Interrupt Processor Targets Register 47 " rgroup.long 0x8C0++0x03 line.long 0x00 "GICD_ITARGETSR48 ,Interrupt Processor Targets Register 48 " rgroup.long 0x8C4++0x03 line.long 0x00 "GICD_ITARGETSR49 ,Interrupt Processor Targets Register 49 " rgroup.long 0x8C8++0x03 line.long 0x00 "GICD_ITARGETSR50 ,Interrupt Processor Targets Register 50 " rgroup.long 0x8CC++0x03 line.long 0x00 "GICD_ITARGETSR51 ,Interrupt Processor Targets Register 51 " rgroup.long 0x8D0++0x03 line.long 0x00 "GICD_ITARGETSR52 ,Interrupt Processor Targets Register 52 " rgroup.long 0x8D4++0x03 line.long 0x00 "GICD_ITARGETSR53 ,Interrupt Processor Targets Register 53 " rgroup.long 0x8D8++0x03 line.long 0x00 "GICD_ITARGETSR54 ,Interrupt Processor Targets Register 54 " rgroup.long 0x8DC++0x03 line.long 0x00 "GICD_ITARGETSR55 ,Interrupt Processor Targets Register 55 " rgroup.long 0x8E0++0x03 line.long 0x00 "GICD_ITARGETSR56 ,Interrupt Processor Targets Register 56 " rgroup.long 0x8E4++0x03 line.long 0x00 "GICD_ITARGETSR57 ,Interrupt Processor Targets Register 57 " rgroup.long 0x8E8++0x03 line.long 0x00 "GICD_ITARGETSR58 ,Interrupt Processor Targets Register 58 " rgroup.long 0x8EC++0x03 line.long 0x00 "GICD_ITARGETSR59 ,Interrupt Processor Targets Register 59 " rgroup.long 0x8F0++0x03 line.long 0x00 "GICD_ITARGETSR60 ,Interrupt Processor Targets Register 60 " rgroup.long 0x8F4++0x03 line.long 0x00 "GICD_ITARGETSR61 ,Interrupt Processor Targets Register 61 " rgroup.long 0x8F8++0x03 line.long 0x00 "GICD_ITARGETSR62 ,Interrupt Processor Targets Register 62 " rgroup.long 0x8FC++0x03 line.long 0x00 "GICD_ITARGETSR63 ,Interrupt Processor Targets Register 63 " rgroup.long 0x900++0x03 line.long 0x00 "GICD_ITARGETSR64 ,Interrupt Processor Targets Register 64 " rgroup.long 0x904++0x03 line.long 0x00 "GICD_ITARGETSR65 ,Interrupt Processor Targets Register 65 " rgroup.long 0x908++0x03 line.long 0x00 "GICD_ITARGETSR66 ,Interrupt Processor Targets Register 66 " rgroup.long 0x90C++0x03 line.long 0x00 "GICD_ITARGETSR67 ,Interrupt Processor Targets Register 67 " rgroup.long 0x910++0x03 line.long 0x00 "GICD_ITARGETSR68 ,Interrupt Processor Targets Register 68 " rgroup.long 0x914++0x03 line.long 0x00 "GICD_ITARGETSR69 ,Interrupt Processor Targets Register 69 " rgroup.long 0x918++0x03 line.long 0x00 "GICD_ITARGETSR70 ,Interrupt Processor Targets Register 70 " rgroup.long 0x91C++0x03 line.long 0x00 "GICD_ITARGETSR71 ,Interrupt Processor Targets Register 71 " rgroup.long 0x920++0x03 line.long 0x00 "GICD_ITARGETSR72 ,Interrupt Processor Targets Register 72 " rgroup.long 0x924++0x03 line.long 0x00 "GICD_ITARGETSR73 ,Interrupt Processor Targets Register 73 " rgroup.long 0x928++0x03 line.long 0x00 "GICD_ITARGETSR74 ,Interrupt Processor Targets Register 74 " rgroup.long 0x92C++0x03 line.long 0x00 "GICD_ITARGETSR75 ,Interrupt Processor Targets Register 75 " rgroup.long 0x930++0x03 line.long 0x00 "GICD_ITARGETSR76 ,Interrupt Processor Targets Register 76 " rgroup.long 0x934++0x03 line.long 0x00 "GICD_ITARGETSR77 ,Interrupt Processor Targets Register 77 " rgroup.long 0x938++0x03 line.long 0x00 "GICD_ITARGETSR78 ,Interrupt Processor Targets Register 78 " rgroup.long 0x93C++0x03 line.long 0x00 "GICD_ITARGETSR79 ,Interrupt Processor Targets Register 79 " rgroup.long 0x940++0x03 line.long 0x00 "GICD_ITARGETSR80 ,Interrupt Processor Targets Register 80 " rgroup.long 0x944++0x03 line.long 0x00 "GICD_ITARGETSR81 ,Interrupt Processor Targets Register 81 " rgroup.long 0x948++0x03 line.long 0x00 "GICD_ITARGETSR82 ,Interrupt Processor Targets Register 82 " rgroup.long 0x94C++0x03 line.long 0x00 "GICD_ITARGETSR83 ,Interrupt Processor Targets Register 83 " rgroup.long 0x950++0x03 line.long 0x00 "GICD_ITARGETSR84 ,Interrupt Processor Targets Register 84 " rgroup.long 0x954++0x03 line.long 0x00 "GICD_ITARGETSR85 ,Interrupt Processor Targets Register 85 " rgroup.long 0x958++0x03 line.long 0x00 "GICD_ITARGETSR86 ,Interrupt Processor Targets Register 86 " rgroup.long 0x95C++0x03 line.long 0x00 "GICD_ITARGETSR87 ,Interrupt Processor Targets Register 87 " rgroup.long 0x960++0x03 line.long 0x00 "GICD_ITARGETSR88 ,Interrupt Processor Targets Register 88 " rgroup.long 0x964++0x03 line.long 0x00 "GICD_ITARGETSR89 ,Interrupt Processor Targets Register 89 " rgroup.long 0x968++0x03 line.long 0x00 "GICD_ITARGETSR90 ,Interrupt Processor Targets Register 90 " rgroup.long 0x96C++0x03 line.long 0x00 "GICD_ITARGETSR91 ,Interrupt Processor Targets Register 91 " rgroup.long 0x970++0x03 line.long 0x00 "GICD_ITARGETSR92 ,Interrupt Processor Targets Register 92 " rgroup.long 0x974++0x03 line.long 0x00 "GICD_ITARGETSR93 ,Interrupt Processor Targets Register 93 " rgroup.long 0x978++0x03 line.long 0x00 "GICD_ITARGETSR94 ,Interrupt Processor Targets Register 94 " rgroup.long 0x97C++0x03 line.long 0x00 "GICD_ITARGETSR95 ,Interrupt Processor Targets Register 95 " rgroup.long 0x980++0x03 line.long 0x00 "GICD_ITARGETSR96 ,Interrupt Processor Targets Register 96 " rgroup.long 0x984++0x03 line.long 0x00 "GICD_ITARGETSR97 ,Interrupt Processor Targets Register 97 " rgroup.long 0x988++0x03 line.long 0x00 "GICD_ITARGETSR98 ,Interrupt Processor Targets Register 98 " rgroup.long 0x98C++0x03 line.long 0x00 "GICD_ITARGETSR99 ,Interrupt Processor Targets Register 99 " rgroup.long 0x990++0x03 line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" rgroup.long 0x994++0x03 line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" rgroup.long 0x998++0x03 line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" rgroup.long 0x99C++0x03 line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" rgroup.long 0x9A0++0x03 line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" rgroup.long 0x9A4++0x03 line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" rgroup.long 0x9A8++0x03 line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" rgroup.long 0x9AC++0x03 line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" rgroup.long 0x9B0++0x03 line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" rgroup.long 0x9B4++0x03 line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" rgroup.long 0x9B8++0x03 line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" rgroup.long 0x9BC++0x03 line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" rgroup.long 0x9C0++0x03 line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" rgroup.long 0x9C4++0x03 line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" rgroup.long 0x9C8++0x03 line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" rgroup.long 0x9CC++0x03 line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" rgroup.long 0x9D0++0x03 line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" rgroup.long 0x9D4++0x03 line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" rgroup.long 0x9D8++0x03 line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" rgroup.long 0x9DC++0x03 line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" rgroup.long 0x9E0++0x03 line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" rgroup.long 0x9E4++0x03 line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" rgroup.long 0x9E8++0x03 line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" rgroup.long 0x9EC++0x03 line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" rgroup.long 0x9F0++0x03 line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" rgroup.long 0x9F4++0x03 line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" rgroup.long 0x9F8++0x03 line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" rgroup.long 0x9FC++0x03 line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" rgroup.long 0xA00++0x03 line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" rgroup.long 0xA04++0x03 line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" rgroup.long 0xA08++0x03 line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" rgroup.long 0xA0C++0x03 line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" rgroup.long 0xA10++0x03 line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" rgroup.long 0xA14++0x03 line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" rgroup.long 0xA18++0x03 line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" rgroup.long 0xA1C++0x03 line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" rgroup.long 0xA20++0x03 line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" rgroup.long 0xA24++0x03 line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" rgroup.long 0xA28++0x03 line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" rgroup.long 0xA2C++0x03 line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" rgroup.long 0xA30++0x03 line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" rgroup.long 0xA34++0x03 line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" rgroup.long 0xA38++0x03 line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" rgroup.long 0xA3C++0x03 line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" rgroup.long 0xA40++0x03 line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" rgroup.long 0xA44++0x03 line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" rgroup.long 0xA48++0x03 line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" rgroup.long 0xA4C++0x03 line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" rgroup.long 0xA50++0x03 line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" rgroup.long 0xA54++0x03 line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" rgroup.long 0xA58++0x03 line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" rgroup.long 0xA5C++0x03 line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" rgroup.long 0xA60++0x03 line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" rgroup.long 0xA64++0x03 line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" rgroup.long 0xA68++0x03 line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" rgroup.long 0xA6C++0x03 line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" rgroup.long 0xA70++0x03 line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" rgroup.long 0xA74++0x03 line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" rgroup.long 0xA78++0x03 line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" rgroup.long 0xA7C++0x03 line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" rgroup.long 0xA80++0x03 line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" rgroup.long 0xA84++0x03 line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" rgroup.long 0xA88++0x03 line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" rgroup.long 0xA8C++0x03 line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" rgroup.long 0xA90++0x03 line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" rgroup.long 0xA94++0x03 line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" rgroup.long 0xA98++0x03 line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" rgroup.long 0xA9C++0x03 line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" rgroup.long 0xAA0++0x03 line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" rgroup.long 0xAA4++0x03 line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" rgroup.long 0xAA8++0x03 line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" rgroup.long 0xAAC++0x03 line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" rgroup.long 0xAB0++0x03 line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" rgroup.long 0xAB4++0x03 line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" rgroup.long 0xAB8++0x03 line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" rgroup.long 0xABC++0x03 line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" rgroup.long 0xAC0++0x03 line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" rgroup.long 0xAC4++0x03 line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" rgroup.long 0xAC8++0x03 line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" rgroup.long 0xACC++0x03 line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" rgroup.long 0xAD0++0x03 line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" rgroup.long 0xAD4++0x03 line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" rgroup.long 0xAD8++0x03 line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" rgroup.long 0xADC++0x03 line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" rgroup.long 0xAE0++0x03 line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" rgroup.long 0xAE4++0x03 line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" rgroup.long 0xAE8++0x03 line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" rgroup.long 0xAEC++0x03 line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" rgroup.long 0xAF0++0x03 line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" rgroup.long 0xAF4++0x03 line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" rgroup.long 0xAF8++0x03 line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" rgroup.long 0xAFC++0x03 line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" rgroup.long 0xB00++0x03 line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" rgroup.long 0xB04++0x03 line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" rgroup.long 0xB08++0x03 line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" rgroup.long 0xB0C++0x03 line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" rgroup.long 0xB10++0x03 line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" rgroup.long 0xB14++0x03 line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" rgroup.long 0xB18++0x03 line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" rgroup.long 0xB1C++0x03 line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" rgroup.long 0xB20++0x03 line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" rgroup.long 0xB24++0x03 line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" rgroup.long 0xB28++0x03 line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" rgroup.long 0xB2C++0x03 line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" rgroup.long 0xB30++0x03 line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" rgroup.long 0xB34++0x03 line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" rgroup.long 0xB38++0x03 line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" rgroup.long 0xB3C++0x03 line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" rgroup.long 0xB40++0x03 line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" rgroup.long 0xB44++0x03 line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" rgroup.long 0xB48++0x03 line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" rgroup.long 0xB4C++0x03 line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" rgroup.long 0xB50++0x03 line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" rgroup.long 0xB54++0x03 line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" rgroup.long 0xB58++0x03 line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" rgroup.long 0xB5C++0x03 line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" rgroup.long 0xB60++0x03 line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" rgroup.long 0xB64++0x03 line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" rgroup.long 0xB68++0x03 line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" rgroup.long 0xB6C++0x03 line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" rgroup.long 0xB70++0x03 line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" rgroup.long 0xB74++0x03 line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" rgroup.long 0xB78++0x03 line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" rgroup.long 0xB7C++0x03 line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" rgroup.long 0xB80++0x03 line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" rgroup.long 0xB84++0x03 line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" rgroup.long 0xB88++0x03 line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" rgroup.long 0xB8C++0x03 line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" rgroup.long 0xB90++0x03 line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" rgroup.long 0xB94++0x03 line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" rgroup.long 0xB98++0x03 line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" rgroup.long 0xB9C++0x03 line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" rgroup.long 0xBA0++0x03 line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" rgroup.long 0xBA4++0x03 line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" rgroup.long 0xBA8++0x03 line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" rgroup.long 0xBAC++0x03 line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" rgroup.long 0xBB0++0x03 line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" rgroup.long 0xBB4++0x03 line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" rgroup.long 0xBB8++0x03 line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" rgroup.long 0xBBC++0x03 line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" rgroup.long 0xBC0++0x03 line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" rgroup.long 0xBC4++0x03 line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" rgroup.long 0xBC8++0x03 line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" rgroup.long 0xBCC++0x03 line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" rgroup.long 0xBD0++0x03 line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" rgroup.long 0xBD4++0x03 line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" rgroup.long 0xBD8++0x03 line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" rgroup.long 0xBDC++0x03 line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" rgroup.long 0xBE0++0x03 line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" rgroup.long 0xBE4++0x03 line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" rgroup.long 0xBE8++0x03 line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" rgroup.long 0xBEC++0x03 line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" rgroup.long 0xBF0++0x03 line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" rgroup.long 0xBF4++0x03 line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" rgroup.long 0xBF8++0x03 line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" endif tree.end width 14. tree "Configuration Registers" rgroup.long 0xC00++0x03 line.long 0x00 "GICD_ICFGR0,Interrupt Configuration Register" textline " " rgroup.long 0xC04++0x03 line.long 0x00 "GICD_ICFGR1,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1) group.long 0xC08++0x03 line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC0C++0x03 line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC08++0x03 line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" rgroup.long 0xC0C++0x03 line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x2) group.long 0xC10++0x03 line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC14++0x03 line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC10++0x03 line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" rgroup.long 0xC14++0x03 line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x3) group.long 0xC18++0x03 line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC1C++0x03 line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC18++0x03 line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" rgroup.long 0xC1C++0x03 line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x4) group.long 0xC20++0x03 line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC24++0x03 line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC20++0x03 line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" rgroup.long 0xC24++0x03 line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x5) group.long 0xC28++0x03 line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC2C++0x03 line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC28++0x03 line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" rgroup.long 0xC2C++0x03 line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x6) group.long 0xC30++0x03 line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC34++0x03 line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC30++0x03 line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" rgroup.long 0xC34++0x03 line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x7) group.long 0xC38++0x03 line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC3C++0x03 line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC38++0x03 line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" rgroup.long 0xC3C++0x03 line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x8) group.long 0xC40++0x03 line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC44++0x03 line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC40++0x03 line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" rgroup.long 0xC44++0x03 line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x9) group.long 0xC48++0x03 line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC4C++0x03 line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC48++0x03 line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" rgroup.long 0xC4C++0x03 line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0xA) group.long 0xC50++0x03 line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC54++0x03 line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC50++0x03 line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" rgroup.long 0xC54++0x03 line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0xB) group.long 0xC58++0x03 line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC5C++0x03 line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC58++0x03 line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" rgroup.long 0xC5C++0x03 line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0xC) group.long 0xC60++0x03 line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC64++0x03 line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC60++0x03 line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" rgroup.long 0xC64++0x03 line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0xD) group.long 0xC68++0x03 line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC6C++0x03 line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC68++0x03 line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" rgroup.long 0xC6C++0x03 line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0xE) group.long 0xC70++0x03 line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC74++0x03 line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC70++0x03 line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" rgroup.long 0xC74++0x03 line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0xF) group.long 0xC78++0x03 line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC7C++0x03 line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC78++0x03 line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" rgroup.long 0xC7C++0x03 line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) group.long 0xC80++0x03 line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC84++0x03 line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC80++0x03 line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" rgroup.long 0xC84++0x03 line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) group.long 0xC88++0x03 line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC8C++0x03 line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC88++0x03 line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" rgroup.long 0xC8C++0x03 line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) group.long 0xC90++0x03 line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC94++0x03 line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC90++0x03 line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" rgroup.long 0xC94++0x03 line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) group.long 0xC98++0x03 line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC9C++0x03 line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xC98++0x03 line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" rgroup.long 0xC9C++0x03 line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) group.long 0xCA0++0x03 line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCA4++0x03 line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCA0++0x03 line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" rgroup.long 0xCA4++0x03 line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) group.long 0xCA8++0x03 line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCAC++0x03 line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCA8++0x03 line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" rgroup.long 0xCAC++0x03 line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) group.long 0xCB0++0x03 line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCB4++0x03 line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCB0++0x03 line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" rgroup.long 0xCB4++0x03 line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) group.long 0xCB8++0x03 line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCBC++0x03 line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCB8++0x03 line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" rgroup.long 0xCBC++0x03 line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) group.long 0xCC0++0x03 line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCC4++0x03 line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCC0++0x03 line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" rgroup.long 0xCC4++0x03 line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) group.long 0xCC8++0x03 line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCCC++0x03 line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCC8++0x03 line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" rgroup.long 0xCCC++0x03 line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) group.long 0xCD0++0x03 line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCD4++0x03 line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCD0++0x03 line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" rgroup.long 0xCD4++0x03 line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) group.long 0xCD8++0x03 line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCDC++0x03 line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCD8++0x03 line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" rgroup.long 0xCDC++0x03 line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) group.long 0xCE0++0x03 line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCE4++0x03 line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCE0++0x03 line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" rgroup.long 0xCE4++0x03 line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) group.long 0xCE8++0x03 line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCEC++0x03 line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCE8++0x03 line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" rgroup.long 0xCEC++0x03 line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) group.long 0xCF0++0x03 line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCF4++0x03 line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCF0++0x03 line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" rgroup.long 0xCF4++0x03 line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1F) group.long 0xCF8++0x03 line.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCFC++0x03 line.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else rgroup.long 0xCF8++0x03 line.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62" rgroup.long 0xCFC++0x03 line.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63" endif tree.end width 12. tree "Peripheral Interrupt Status Registers" rgroup.long 0x0D00++0x03 line.long 0x00 "GICD_PPISR,Private Peripheral Interrupt Status Register" bitfld.long 0x00 15. " PPI3S ,nIRQ pin status" "No interrupt,Interrupt" bitfld.long 0x00 14. " PPI2S ,Non-secure Physical Timer event status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 13. " PPI1S ,Secure Physical Timer event status" "No interrupt,Interrupt" bitfld.long 0x00 12. " PPI0S ,nFIQ pin status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PPI4S ,Virtual Timer event status" "No interrupt,Interrupt" bitfld.long 0x00 10. " PPI5S ,Hypervisor Timer event status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " PPI6S ,Virtual Maintenance Status" "No interrupt,Interrupt" textline " " width 22. if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x01) rgroup.long 0x0D04++0x03 line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0" bitfld.long 0x00 31. " IRQS31 ,IRQS Status Bit 31" "Low,High" bitfld.long 0x00 30. " IRQS30 ,IRQS Status Bit 30" "Low,High" bitfld.long 0x00 29. " IRQS29 ,IRQS Status Bit 29" "Low,High" textline " " bitfld.long 0x00 28. " IRQS28 ,IRQS Status Bit 28" "Low,High" bitfld.long 0x00 27. " IRQS27 ,IRQS Status Bit 27" "Low,High" bitfld.long 0x00 26. " IRQS26 ,IRQS Status Bit 26" "Low,High" textline " " bitfld.long 0x00 25. " IRQS25 ,IRQS Status Bit 25" "Low,High" bitfld.long 0x00 24. " IRQS24 ,IRQS Status Bit 24" "Low,High" bitfld.long 0x00 23. " IRQS23 ,IRQS Status Bit 23" "Low,High" textline " " bitfld.long 0x00 22. " IRQS22 ,IRQS Status Bit 22" "Low,High" bitfld.long 0x00 21. " IRQS21 ,IRQS Status Bit 21" "Low,High" bitfld.long 0x00 20. " IRQS20 ,IRQS Status Bit 20" "Low,High" textline " " bitfld.long 0x00 19. " IRQS19 ,IRQS Status Bit 19" "Low,High" bitfld.long 0x00 18. " IRQS18 ,IRQS Status Bit 18" "Low,High" bitfld.long 0x00 17. " IRQS17 ,IRQS Status Bit 17" "Low,High" textline " " bitfld.long 0x00 16. " IRQS16 ,IRQS Status Bit 16" "Low,High" bitfld.long 0x00 15. " IRQS15 ,IRQS Status Bit 15" "Low,High" bitfld.long 0x00 14. " IRQS14 ,IRQS Status Bit 14" "Low,High" textline " " bitfld.long 0x00 13. " IRQS13 ,IRQS Status Bit 13" "Low,High" bitfld.long 0x00 12. " IRQS12 ,IRQS Status Bit 12" "Low,High" bitfld.long 0x00 11. " IRQS11 ,IRQS Status Bit 11" "Low,High" textline " " bitfld.long 0x00 10. " IRQS10 ,IRQS Status Bit 10" "Low,High" bitfld.long 0x00 9. " IRQS9 ,IRQS Status Bit 9" "Low,High" bitfld.long 0x00 8. " IRQS8 ,IRQS Status Bit 8" "Low,High" textline " " bitfld.long 0x00 7. " IRQS7 ,IRQS Status Bit 7" "Low,High" bitfld.long 0x00 6. " IRQS6 ,IRQS Status Bit 6" "Low,High" bitfld.long 0x00 5. " IRQS5 ,IRQS Status Bit 5" "Low,High" textline " " bitfld.long 0x00 4. " IRQS4 ,IRQS Status Bit 4" "Low,High" bitfld.long 0x00 3. " IRQS3 ,IRQS Status Bit 3" "Low,High" bitfld.long 0x00 2. " IRQS2 ,IRQS Status Bit 2" "Low,High" textline " " bitfld.long 0x00 1. " IRQS1 ,IRQS Status Bit 1" "Low,High" bitfld.long 0x00 0. " IRQS0 ,IRQS Status Bit 0" "Low,High" else rgroup.long 0x0D04++0x03 line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x02) rgroup.long 0x0D08++0x03 line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" bitfld.long 0x00 31. " IRQS63 ,IRQS Status Bit 63" "Low,High" bitfld.long 0x00 30. " IRQS62 ,IRQS Status Bit 62" "Low,High" bitfld.long 0x00 29. " IRQS61 ,IRQS Status Bit 61" "Low,High" textline " " bitfld.long 0x00 28. " IRQS60 ,IRQS Status Bit 60" "Low,High" bitfld.long 0x00 27. " IRQS59 ,IRQS Status Bit 59" "Low,High" bitfld.long 0x00 26. " IRQS58 ,IRQS Status Bit 58" "Low,High" textline " " bitfld.long 0x00 25. " IRQS57 ,IRQS Status Bit 57" "Low,High" bitfld.long 0x00 24. " IRQS56 ,IRQS Status Bit 56" "Low,High" bitfld.long 0x00 23. " IRQS55 ,IRQS Status Bit 55" "Low,High" textline " " bitfld.long 0x00 22. " IRQS54 ,IRQS Status Bit 54" "Low,High" bitfld.long 0x00 21. " IRQS53 ,IRQS Status Bit 53" "Low,High" bitfld.long 0x00 20. " IRQS52 ,IRQS Status Bit 52" "Low,High" textline " " bitfld.long 0x00 19. " IRQS51 ,IRQS Status Bit 51" "Low,High" bitfld.long 0x00 18. " IRQS50 ,IRQS Status Bit 50" "Low,High" bitfld.long 0x00 17. " IRQS49 ,IRQS Status Bit 49" "Low,High" textline " " bitfld.long 0x00 16. " IRQS48 ,IRQS Status Bit 48" "Low,High" bitfld.long 0x00 15. " IRQS47 ,IRQS Status Bit 47" "Low,High" bitfld.long 0x00 14. " IRQS46 ,IRQS Status Bit 46" "Low,High" textline " " bitfld.long 0x00 13. " IRQS45 ,IRQS Status Bit 45" "Low,High" bitfld.long 0x00 12. " IRQS44 ,IRQS Status Bit 44" "Low,High" bitfld.long 0x00 11. " IRQS43 ,IRQS Status Bit 43" "Low,High" textline " " bitfld.long 0x00 10. " IRQS42 ,IRQS Status Bit 42" "Low,High" bitfld.long 0x00 9. " IRQS41 ,IRQS Status Bit 41" "Low,High" bitfld.long 0x00 8. " IRQS40 ,IRQS Status Bit 40" "Low,High" textline " " bitfld.long 0x00 7. " IRQS39 ,IRQS Status Bit 39" "Low,High" bitfld.long 0x00 6. " IRQS38 ,IRQS Status Bit 38" "Low,High" bitfld.long 0x00 5. " IRQS37 ,IRQS Status Bit 37" "Low,High" textline " " bitfld.long 0x00 4. " IRQS36 ,IRQS Status Bit 36" "Low,High" bitfld.long 0x00 3. " IRQS35 ,IRQS Status Bit 35" "Low,High" bitfld.long 0x00 2. " IRQS34 ,IRQS Status Bit 34" "Low,High" textline " " bitfld.long 0x00 1. " IRQS33 ,IRQS Status Bit 33" "Low,High" bitfld.long 0x00 0. " IRQS32 ,IRQS Status Bit 32" "Low,High" else rgroup.long 0x0D08++0x03 line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x03) rgroup.long 0x0D0C++0x03 line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" bitfld.long 0x00 31. " IRQS95 ,IRQS Status Bit 95" "Low,High" bitfld.long 0x00 30. " IRQS94 ,IRQS Status Bit 94" "Low,High" bitfld.long 0x00 29. " IRQS93 ,IRQS Status Bit 93" "Low,High" textline " " bitfld.long 0x00 28. " IRQS92 ,IRQS Status Bit 92" "Low,High" bitfld.long 0x00 27. " IRQS91 ,IRQS Status Bit 91" "Low,High" bitfld.long 0x00 26. " IRQS90 ,IRQS Status Bit 90" "Low,High" textline " " bitfld.long 0x00 25. " IRQS89 ,IRQS Status Bit 89" "Low,High" bitfld.long 0x00 24. " IRQS88 ,IRQS Status Bit 88" "Low,High" bitfld.long 0x00 23. " IRQS87 ,IRQS Status Bit 87" "Low,High" textline " " bitfld.long 0x00 22. " IRQS86 ,IRQS Status Bit 86" "Low,High" bitfld.long 0x00 21. " IRQS85 ,IRQS Status Bit 85" "Low,High" bitfld.long 0x00 20. " IRQS84 ,IRQS Status Bit 84" "Low,High" textline " " bitfld.long 0x00 19. " IRQS83 ,IRQS Status Bit 83" "Low,High" bitfld.long 0x00 18. " IRQS82 ,IRQS Status Bit 82" "Low,High" bitfld.long 0x00 17. " IRQS81 ,IRQS Status Bit 81" "Low,High" textline " " bitfld.long 0x00 16. " IRQS80 ,IRQS Status Bit 80" "Low,High" bitfld.long 0x00 15. " IRQS79 ,IRQS Status Bit 79" "Low,High" bitfld.long 0x00 14. " IRQS78 ,IRQS Status Bit 78" "Low,High" textline " " bitfld.long 0x00 13. " IRQS77 ,IRQS Status Bit 77" "Low,High" bitfld.long 0x00 12. " IRQS76 ,IRQS Status Bit 76" "Low,High" bitfld.long 0x00 11. " IRQS75 ,IRQS Status Bit 75" "Low,High" textline " " bitfld.long 0x00 10. " IRQS74 ,IRQS Status Bit 74" "Low,High" bitfld.long 0x00 9. " IRQS73 ,IRQS Status Bit 73" "Low,High" bitfld.long 0x00 8. " IRQS72 ,IRQS Status Bit 72" "Low,High" textline " " bitfld.long 0x00 7. " IRQS71 ,IRQS Status Bit 71" "Low,High" bitfld.long 0x00 6. " IRQS70 ,IRQS Status Bit 70" "Low,High" bitfld.long 0x00 5. " IRQS69 ,IRQS Status Bit 69" "Low,High" textline " " bitfld.long 0x00 4. " IRQS68 ,IRQS Status Bit 68" "Low,High" bitfld.long 0x00 3. " IRQS67 ,IRQS Status Bit 67" "Low,High" bitfld.long 0x00 2. " IRQS66 ,IRQS Status Bit 66" "Low,High" textline " " bitfld.long 0x00 1. " IRQS65 ,IRQS Status Bit 65" "Low,High" bitfld.long 0x00 0. " IRQS64 ,IRQS Status Bit 64" "Low,High" else rgroup.long 0x0D0C++0x03 line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x04) rgroup.long 0x0D10++0x03 line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" bitfld.long 0x00 31. " IRQS127 ,IRQS Status Bit 127" "Low,High" bitfld.long 0x00 30. " IRQS126 ,IRQS Status Bit 126" "Low,High" bitfld.long 0x00 29. " IRQS125 ,IRQS Status Bit 125" "Low,High" textline " " bitfld.long 0x00 28. " IRQS124 ,IRQS Status Bit 124" "Low,High" bitfld.long 0x00 27. " IRQS123 ,IRQS Status Bit 123" "Low,High" bitfld.long 0x00 26. " IRQS122 ,IRQS Status Bit 122" "Low,High" textline " " bitfld.long 0x00 25. " IRQS121 ,IRQS Status Bit 121" "Low,High" bitfld.long 0x00 24. " IRQS120 ,IRQS Status Bit 120" "Low,High" bitfld.long 0x00 23. " IRQS119 ,IRQS Status Bit 119" "Low,High" textline " " bitfld.long 0x00 22. " IRQS118 ,IRQS Status Bit 118" "Low,High" bitfld.long 0x00 21. " IRQS117 ,IRQS Status Bit 117" "Low,High" bitfld.long 0x00 20. " IRQS116 ,IRQS Status Bit 116" "Low,High" textline " " bitfld.long 0x00 19. " IRQS115 ,IRQS Status Bit 115" "Low,High" bitfld.long 0x00 18. " IRQS114 ,IRQS Status Bit 114" "Low,High" bitfld.long 0x00 17. " IRQS113 ,IRQS Status Bit 113" "Low,High" textline " " bitfld.long 0x00 16. " IRQS112 ,IRQS Status Bit 112" "Low,High" bitfld.long 0x00 15. " IRQS111 ,IRQS Status Bit 111" "Low,High" bitfld.long 0x00 14. " IRQS110 ,IRQS Status Bit 110" "Low,High" textline " " bitfld.long 0x00 13. " IRQS109 ,IRQS Status Bit 109" "Low,High" bitfld.long 0x00 12. " IRQS108 ,IRQS Status Bit 108" "Low,High" bitfld.long 0x00 11. " IRQS107 ,IRQS Status Bit 107" "Low,High" textline " " bitfld.long 0x00 10. " IRQS106 ,IRQS Status Bit 106" "Low,High" bitfld.long 0x00 9. " IRQS105 ,IRQS Status Bit 105" "Low,High" bitfld.long 0x00 8. " IRQS104 ,IRQS Status Bit 104" "Low,High" textline " " bitfld.long 0x00 7. " IRQS103 ,IRQS Status Bit 103" "Low,High" bitfld.long 0x00 6. " IRQS102 ,IRQS Status Bit 102" "Low,High" bitfld.long 0x00 5. " IRQS101 ,IRQS Status Bit 101" "Low,High" textline " " bitfld.long 0x00 4. " IRQS100 ,IRQS Status Bit 100" "Low,High" bitfld.long 0x00 3. " IRQS99 ,IRQS Status Bit 99" "Low,High" bitfld.long 0x00 2. " IRQS98 ,IRQS Status Bit 98" "Low,High" textline " " bitfld.long 0x00 1. " IRQS97 ,IRQS Status Bit 97" "Low,High" bitfld.long 0x00 0. " IRQS96 ,IRQS Status Bit 96" "Low,High" else rgroup.long 0x0D10++0x03 line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x05) rgroup.long 0x0D14++0x03 line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" bitfld.long 0x00 31. " IRQS159 ,IRQS Status Bit 159" "Low,High" bitfld.long 0x00 30. " IRQS158 ,IRQS Status Bit 158" "Low,High" bitfld.long 0x00 29. " IRQS157 ,IRQS Status Bit 157" "Low,High" textline " " bitfld.long 0x00 28. " IRQS156 ,IRQS Status Bit 156" "Low,High" bitfld.long 0x00 27. " IRQS155 ,IRQS Status Bit 155" "Low,High" bitfld.long 0x00 26. " IRQS154 ,IRQS Status Bit 154" "Low,High" textline " " bitfld.long 0x00 25. " IRQS153 ,IRQS Status Bit 153" "Low,High" bitfld.long 0x00 24. " IRQS152 ,IRQS Status Bit 152" "Low,High" bitfld.long 0x00 23. " IRQS151 ,IRQS Status Bit 151" "Low,High" textline " " bitfld.long 0x00 22. " IRQS150 ,IRQS Status Bit 150" "Low,High" bitfld.long 0x00 21. " IRQS149 ,IRQS Status Bit 149" "Low,High" bitfld.long 0x00 20. " IRQS148 ,IRQS Status Bit 148" "Low,High" textline " " bitfld.long 0x00 19. " IRQS147 ,IRQS Status Bit 147" "Low,High" bitfld.long 0x00 18. " IRQS146 ,IRQS Status Bit 146" "Low,High" bitfld.long 0x00 17. " IRQS145 ,IRQS Status Bit 145" "Low,High" textline " " bitfld.long 0x00 16. " IRQS144 ,IRQS Status Bit 144" "Low,High" bitfld.long 0x00 15. " IRQS143 ,IRQS Status Bit 143" "Low,High" bitfld.long 0x00 14. " IRQS142 ,IRQS Status Bit 142" "Low,High" textline " " bitfld.long 0x00 13. " IRQS141 ,IRQS Status Bit 141" "Low,High" bitfld.long 0x00 12. " IRQS140 ,IRQS Status Bit 140" "Low,High" bitfld.long 0x00 11. " IRQS139 ,IRQS Status Bit 139" "Low,High" textline " " bitfld.long 0x00 10. " IRQS138 ,IRQS Status Bit 138" "Low,High" bitfld.long 0x00 9. " IRQS137 ,IRQS Status Bit 137" "Low,High" bitfld.long 0x00 8. " IRQS136 ,IRQS Status Bit 136" "Low,High" textline " " bitfld.long 0x00 7. " IRQS135 ,IRQS Status Bit 135" "Low,High" bitfld.long 0x00 6. " IRQS134 ,IRQS Status Bit 134" "Low,High" bitfld.long 0x00 5. " IRQS133 ,IRQS Status Bit 133" "Low,High" textline " " bitfld.long 0x00 4. " IRQS132 ,IRQS Status Bit 132" "Low,High" bitfld.long 0x00 3. " IRQS131 ,IRQS Status Bit 131" "Low,High" bitfld.long 0x00 2. " IRQS130 ,IRQS Status Bit 130" "Low,High" textline " " bitfld.long 0x00 1. " IRQS129 ,IRQS Status Bit 129" "Low,High" bitfld.long 0x00 0. " IRQS128 ,IRQS Status Bit 128" "Low,High" else rgroup.long 0x0D14++0x03 line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x06) rgroup.long 0x0D18++0x03 line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" bitfld.long 0x00 31. " IRQS191 ,IRQS Status Bit 191" "Low,High" bitfld.long 0x00 30. " IRQS190 ,IRQS Status Bit 190" "Low,High" bitfld.long 0x00 29. " IRQS189 ,IRQS Status Bit 189" "Low,High" textline " " bitfld.long 0x00 28. " IRQS188 ,IRQS Status Bit 188" "Low,High" bitfld.long 0x00 27. " IRQS187 ,IRQS Status Bit 187" "Low,High" bitfld.long 0x00 26. " IRQS186 ,IRQS Status Bit 186" "Low,High" textline " " bitfld.long 0x00 25. " IRQS185 ,IRQS Status Bit 185" "Low,High" bitfld.long 0x00 24. " IRQS184 ,IRQS Status Bit 184" "Low,High" bitfld.long 0x00 23. " IRQS183 ,IRQS Status Bit 183" "Low,High" textline " " bitfld.long 0x00 22. " IRQS182 ,IRQS Status Bit 182" "Low,High" bitfld.long 0x00 21. " IRQS181 ,IRQS Status Bit 181" "Low,High" bitfld.long 0x00 20. " IRQS180 ,IRQS Status Bit 180" "Low,High" textline " " bitfld.long 0x00 19. " IRQS179 ,IRQS Status Bit 179" "Low,High" bitfld.long 0x00 18. " IRQS178 ,IRQS Status Bit 178" "Low,High" bitfld.long 0x00 17. " IRQS177 ,IRQS Status Bit 177" "Low,High" textline " " bitfld.long 0x00 16. " IRQS176 ,IRQS Status Bit 176" "Low,High" bitfld.long 0x00 15. " IRQS175 ,IRQS Status Bit 175" "Low,High" bitfld.long 0x00 14. " IRQS174 ,IRQS Status Bit 174" "Low,High" textline " " bitfld.long 0x00 13. " IRQS173 ,IRQS Status Bit 173" "Low,High" bitfld.long 0x00 12. " IRQS172 ,IRQS Status Bit 172" "Low,High" bitfld.long 0x00 11. " IRQS171 ,IRQS Status Bit 171" "Low,High" textline " " bitfld.long 0x00 10. " IRQS170 ,IRQS Status Bit 170" "Low,High" bitfld.long 0x00 9. " IRQS169 ,IRQS Status Bit 169" "Low,High" bitfld.long 0x00 8. " IRQS168 ,IRQS Status Bit 168" "Low,High" textline " " bitfld.long 0x00 7. " IRQS167 ,IRQS Status Bit 167" "Low,High" bitfld.long 0x00 6. " IRQS166 ,IRQS Status Bit 166" "Low,High" bitfld.long 0x00 5. " IRQS165 ,IRQS Status Bit 165" "Low,High" textline " " bitfld.long 0x00 4. " IRQS164 ,IRQS Status Bit 164" "Low,High" bitfld.long 0x00 3. " IRQS163 ,IRQS Status Bit 163" "Low,High" bitfld.long 0x00 2. " IRQS162 ,IRQS Status Bit 162" "Low,High" textline " " bitfld.long 0x00 1. " IRQS161 ,IRQS Status Bit 161" "Low,High" bitfld.long 0x00 0. " IRQS160 ,IRQS Status Bit 160" "Low,High" else rgroup.long 0x0D18++0x03 line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x07) rgroup.long 0x0D1C++0x03 line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" bitfld.long 0x00 31. " IRQS223 ,IRQS Status Bit 223" "Low,High" bitfld.long 0x00 30. " IRQS222 ,IRQS Status Bit 222" "Low,High" bitfld.long 0x00 29. " IRQS221 ,IRQS Status Bit 221" "Low,High" textline " " bitfld.long 0x00 28. " IRQS220 ,IRQS Status Bit 220" "Low,High" bitfld.long 0x00 27. " IRQS219 ,IRQS Status Bit 219" "Low,High" bitfld.long 0x00 26. " IRQS218 ,IRQS Status Bit 218" "Low,High" textline " " bitfld.long 0x00 25. " IRQS217 ,IRQS Status Bit 217" "Low,High" bitfld.long 0x00 24. " IRQS216 ,IRQS Status Bit 216" "Low,High" bitfld.long 0x00 23. " IRQS215 ,IRQS Status Bit 215" "Low,High" textline " " bitfld.long 0x00 22. " IRQS214 ,IRQS Status Bit 214" "Low,High" bitfld.long 0x00 21. " IRQS213 ,IRQS Status Bit 213" "Low,High" bitfld.long 0x00 20. " IRQS212 ,IRQS Status Bit 212" "Low,High" textline " " bitfld.long 0x00 19. " IRQS211 ,IRQS Status Bit 211" "Low,High" bitfld.long 0x00 18. " IRQS210 ,IRQS Status Bit 210" "Low,High" bitfld.long 0x00 17. " IRQS209 ,IRQS Status Bit 209" "Low,High" textline " " bitfld.long 0x00 16. " IRQS208 ,IRQS Status Bit 208" "Low,High" bitfld.long 0x00 15. " IRQS207 ,IRQS Status Bit 207" "Low,High" bitfld.long 0x00 14. " IRQS206 ,IRQS Status Bit 206" "Low,High" textline " " bitfld.long 0x00 13. " IRQS205 ,IRQS Status Bit 205" "Low,High" bitfld.long 0x00 12. " IRQS204 ,IRQS Status Bit 204" "Low,High" bitfld.long 0x00 11. " IRQS203 ,IRQS Status Bit 203" "Low,High" textline " " bitfld.long 0x00 10. " IRQS202 ,IRQS Status Bit 202" "Low,High" bitfld.long 0x00 9. " IRQS201 ,IRQS Status Bit 201" "Low,High" bitfld.long 0x00 8. " IRQS200 ,IRQS Status Bit 200" "Low,High" textline " " bitfld.long 0x00 7. " IRQS199 ,IRQS Status Bit 199" "Low,High" bitfld.long 0x00 6. " IRQS198 ,IRQS Status Bit 198" "Low,High" bitfld.long 0x00 5. " IRQS197 ,IRQS Status Bit 197" "Low,High" textline " " bitfld.long 0x00 4. " IRQS196 ,IRQS Status Bit 196" "Low,High" bitfld.long 0x00 3. " IRQS195 ,IRQS Status Bit 195" "Low,High" bitfld.long 0x00 2. " IRQS194 ,IRQS Status Bit 194" "Low,High" textline " " bitfld.long 0x00 1. " IRQS193 ,IRQS Status Bit 193" "Low,High" bitfld.long 0x00 0. " IRQS192 ,IRQS Status Bit 192" "Low,High" else rgroup.long 0x0D1C++0x03 line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x08) rgroup.long 0x0D20++0x03 line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" bitfld.long 0x00 31. " IRQS255 ,IRQS Status Bit 255" "Low,High" bitfld.long 0x00 30. " IRQS254 ,IRQS Status Bit 254" "Low,High" bitfld.long 0x00 29. " IRQS253 ,IRQS Status Bit 253" "Low,High" textline " " bitfld.long 0x00 28. " IRQS252 ,IRQS Status Bit 252" "Low,High" bitfld.long 0x00 27. " IRQS251 ,IRQS Status Bit 251" "Low,High" bitfld.long 0x00 26. " IRQS250 ,IRQS Status Bit 250" "Low,High" textline " " bitfld.long 0x00 25. " IRQS249 ,IRQS Status Bit 249" "Low,High" bitfld.long 0x00 24. " IRQS248 ,IRQS Status Bit 248" "Low,High" bitfld.long 0x00 23. " IRQS247 ,IRQS Status Bit 247" "Low,High" textline " " bitfld.long 0x00 22. " IRQS246 ,IRQS Status Bit 246" "Low,High" bitfld.long 0x00 21. " IRQS245 ,IRQS Status Bit 245" "Low,High" bitfld.long 0x00 20. " IRQS244 ,IRQS Status Bit 244" "Low,High" textline " " bitfld.long 0x00 19. " IRQS243 ,IRQS Status Bit 243" "Low,High" bitfld.long 0x00 18. " IRQS242 ,IRQS Status Bit 242" "Low,High" bitfld.long 0x00 17. " IRQS241 ,IRQS Status Bit 241" "Low,High" textline " " bitfld.long 0x00 16. " IRQS240 ,IRQS Status Bit 240" "Low,High" bitfld.long 0x00 15. " IRQS239 ,IRQS Status Bit 239" "Low,High" bitfld.long 0x00 14. " IRQS238 ,IRQS Status Bit 238" "Low,High" textline " " bitfld.long 0x00 13. " IRQS237 ,IRQS Status Bit 237" "Low,High" bitfld.long 0x00 12. " IRQS236 ,IRQS Status Bit 236" "Low,High" bitfld.long 0x00 11. " IRQS235 ,IRQS Status Bit 235" "Low,High" textline " " bitfld.long 0x00 10. " IRQS234 ,IRQS Status Bit 234" "Low,High" bitfld.long 0x00 9. " IRQS233 ,IRQS Status Bit 233" "Low,High" bitfld.long 0x00 8. " IRQS232 ,IRQS Status Bit 232" "Low,High" textline " " bitfld.long 0x00 7. " IRQS231 ,IRQS Status Bit 231" "Low,High" bitfld.long 0x00 6. " IRQS230 ,IRQS Status Bit 230" "Low,High" bitfld.long 0x00 5. " IRQS229 ,IRQS Status Bit 229" "Low,High" textline " " bitfld.long 0x00 4. " IRQS228 ,IRQS Status Bit 228" "Low,High" bitfld.long 0x00 3. " IRQS227 ,IRQS Status Bit 227" "Low,High" bitfld.long 0x00 2. " IRQS226 ,IRQS Status Bit 226" "Low,High" textline " " bitfld.long 0x00 1. " IRQS225 ,IRQS Status Bit 225" "Low,High" bitfld.long 0x00 0. " IRQS224 ,IRQS Status Bit 224" "Low,High" else rgroup.long 0x0D20++0x03 line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x09) rgroup.long 0x0D24++0x03 line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" bitfld.long 0x00 31. " IRQS287 ,IRQS Status Bit 287" "Low,High" bitfld.long 0x00 30. " IRQS286 ,IRQS Status Bit 286" "Low,High" bitfld.long 0x00 29. " IRQS285 ,IRQS Status Bit 285" "Low,High" textline " " bitfld.long 0x00 28. " IRQS284 ,IRQS Status Bit 284" "Low,High" bitfld.long 0x00 27. " IRQS283 ,IRQS Status Bit 283" "Low,High" bitfld.long 0x00 26. " IRQS282 ,IRQS Status Bit 282" "Low,High" textline " " bitfld.long 0x00 25. " IRQS281 ,IRQS Status Bit 281" "Low,High" bitfld.long 0x00 24. " IRQS280 ,IRQS Status Bit 280" "Low,High" bitfld.long 0x00 23. " IRQS279 ,IRQS Status Bit 279" "Low,High" textline " " bitfld.long 0x00 22. " IRQS278 ,IRQS Status Bit 278" "Low,High" bitfld.long 0x00 21. " IRQS277 ,IRQS Status Bit 277" "Low,High" bitfld.long 0x00 20. " IRQS276 ,IRQS Status Bit 276" "Low,High" textline " " bitfld.long 0x00 19. " IRQS275 ,IRQS Status Bit 275" "Low,High" bitfld.long 0x00 18. " IRQS274 ,IRQS Status Bit 274" "Low,High" bitfld.long 0x00 17. " IRQS273 ,IRQS Status Bit 273" "Low,High" textline " " bitfld.long 0x00 16. " IRQS272 ,IRQS Status Bit 272" "Low,High" bitfld.long 0x00 15. " IRQS271 ,IRQS Status Bit 271" "Low,High" bitfld.long 0x00 14. " IRQS270 ,IRQS Status Bit 270" "Low,High" textline " " bitfld.long 0x00 13. " IRQS269 ,IRQS Status Bit 269" "Low,High" bitfld.long 0x00 12. " IRQS268 ,IRQS Status Bit 268" "Low,High" bitfld.long 0x00 11. " IRQS267 ,IRQS Status Bit 267" "Low,High" textline " " bitfld.long 0x00 10. " IRQS266 ,IRQS Status Bit 266" "Low,High" bitfld.long 0x00 9. " IRQS265 ,IRQS Status Bit 265" "Low,High" bitfld.long 0x00 8. " IRQS264 ,IRQS Status Bit 264" "Low,High" textline " " bitfld.long 0x00 7. " IRQS263 ,IRQS Status Bit 263" "Low,High" bitfld.long 0x00 6. " IRQS262 ,IRQS Status Bit 262" "Low,High" bitfld.long 0x00 5. " IRQS261 ,IRQS Status Bit 261" "Low,High" textline " " bitfld.long 0x00 4. " IRQS260 ,IRQS Status Bit 260" "Low,High" bitfld.long 0x00 3. " IRQS259 ,IRQS Status Bit 259" "Low,High" bitfld.long 0x00 2. " IRQS258 ,IRQS Status Bit 258" "Low,High" textline " " bitfld.long 0x00 1. " IRQS257 ,IRQS Status Bit 257" "Low,High" bitfld.long 0x00 0. " IRQS256 ,IRQS Status Bit 256" "Low,High" else rgroup.long 0x0D24++0x03 line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0A) rgroup.long 0x0D28++0x03 line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" bitfld.long 0x00 31. " IRQS319 ,IRQS Status Bit 319" "Low,High" bitfld.long 0x00 30. " IRQS318 ,IRQS Status Bit 318" "Low,High" bitfld.long 0x00 29. " IRQS317 ,IRQS Status Bit 317" "Low,High" textline " " bitfld.long 0x00 28. " IRQS316 ,IRQS Status Bit 316" "Low,High" bitfld.long 0x00 27. " IRQS315 ,IRQS Status Bit 315" "Low,High" bitfld.long 0x00 26. " IRQS314 ,IRQS Status Bit 314" "Low,High" textline " " bitfld.long 0x00 25. " IRQS313 ,IRQS Status Bit 313" "Low,High" bitfld.long 0x00 24. " IRQS312 ,IRQS Status Bit 312" "Low,High" bitfld.long 0x00 23. " IRQS311 ,IRQS Status Bit 311" "Low,High" textline " " bitfld.long 0x00 22. " IRQS310 ,IRQS Status Bit 310" "Low,High" bitfld.long 0x00 21. " IRQS309 ,IRQS Status Bit 309" "Low,High" bitfld.long 0x00 20. " IRQS308 ,IRQS Status Bit 308" "Low,High" textline " " bitfld.long 0x00 19. " IRQS307 ,IRQS Status Bit 307" "Low,High" bitfld.long 0x00 18. " IRQS306 ,IRQS Status Bit 306" "Low,High" bitfld.long 0x00 17. " IRQS305 ,IRQS Status Bit 305" "Low,High" textline " " bitfld.long 0x00 16. " IRQS304 ,IRQS Status Bit 304" "Low,High" bitfld.long 0x00 15. " IRQS303 ,IRQS Status Bit 303" "Low,High" bitfld.long 0x00 14. " IRQS302 ,IRQS Status Bit 302" "Low,High" textline " " bitfld.long 0x00 13. " IRQS301 ,IRQS Status Bit 301" "Low,High" bitfld.long 0x00 12. " IRQS300 ,IRQS Status Bit 300" "Low,High" bitfld.long 0x00 11. " IRQS299 ,IRQS Status Bit 299" "Low,High" textline " " bitfld.long 0x00 10. " IRQS298 ,IRQS Status Bit 298" "Low,High" bitfld.long 0x00 9. " IRQS297 ,IRQS Status Bit 297" "Low,High" bitfld.long 0x00 8. " IRQS296 ,IRQS Status Bit 296" "Low,High" textline " " bitfld.long 0x00 7. " IRQS295 ,IRQS Status Bit 295" "Low,High" bitfld.long 0x00 6. " IRQS294 ,IRQS Status Bit 294" "Low,High" bitfld.long 0x00 5. " IRQS293 ,IRQS Status Bit 293" "Low,High" textline " " bitfld.long 0x00 4. " IRQS292 ,IRQS Status Bit 292" "Low,High" bitfld.long 0x00 3. " IRQS291 ,IRQS Status Bit 291" "Low,High" bitfld.long 0x00 2. " IRQS290 ,IRQS Status Bit 290" "Low,High" textline " " bitfld.long 0x00 1. " IRQS289 ,IRQS Status Bit 289" "Low,High" bitfld.long 0x00 0. " IRQS288 ,IRQS Status Bit 288" "Low,High" else rgroup.long 0x0D28++0x03 line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0B) rgroup.long 0x0D2C++0x03 line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" bitfld.long 0x00 31. " IRQS351 ,IRQS Status Bit 351" "Low,High" bitfld.long 0x00 30. " IRQS350 ,IRQS Status Bit 350" "Low,High" bitfld.long 0x00 29. " IRQS349 ,IRQS Status Bit 349" "Low,High" textline " " bitfld.long 0x00 28. " IRQS348 ,IRQS Status Bit 348" "Low,High" bitfld.long 0x00 27. " IRQS347 ,IRQS Status Bit 347" "Low,High" bitfld.long 0x00 26. " IRQS346 ,IRQS Status Bit 346" "Low,High" textline " " bitfld.long 0x00 25. " IRQS345 ,IRQS Status Bit 345" "Low,High" bitfld.long 0x00 24. " IRQS344 ,IRQS Status Bit 344" "Low,High" bitfld.long 0x00 23. " IRQS343 ,IRQS Status Bit 343" "Low,High" textline " " bitfld.long 0x00 22. " IRQS342 ,IRQS Status Bit 342" "Low,High" bitfld.long 0x00 21. " IRQS341 ,IRQS Status Bit 341" "Low,High" bitfld.long 0x00 20. " IRQS340 ,IRQS Status Bit 340" "Low,High" textline " " bitfld.long 0x00 19. " IRQS339 ,IRQS Status Bit 339" "Low,High" bitfld.long 0x00 18. " IRQS338 ,IRQS Status Bit 338" "Low,High" bitfld.long 0x00 17. " IRQS337 ,IRQS Status Bit 337" "Low,High" textline " " bitfld.long 0x00 16. " IRQS336 ,IRQS Status Bit 336" "Low,High" bitfld.long 0x00 15. " IRQS335 ,IRQS Status Bit 335" "Low,High" bitfld.long 0x00 14. " IRQS334 ,IRQS Status Bit 334" "Low,High" textline " " bitfld.long 0x00 13. " IRQS333 ,IRQS Status Bit 333" "Low,High" bitfld.long 0x00 12. " IRQS332 ,IRQS Status Bit 332" "Low,High" bitfld.long 0x00 11. " IRQS331 ,IRQS Status Bit 331" "Low,High" textline " " bitfld.long 0x00 10. " IRQS330 ,IRQS Status Bit 330" "Low,High" bitfld.long 0x00 9. " IRQS329 ,IRQS Status Bit 329" "Low,High" bitfld.long 0x00 8. " IRQS328 ,IRQS Status Bit 328" "Low,High" textline " " bitfld.long 0x00 7. " IRQS327 ,IRQS Status Bit 327" "Low,High" bitfld.long 0x00 6. " IRQS326 ,IRQS Status Bit 326" "Low,High" bitfld.long 0x00 5. " IRQS325 ,IRQS Status Bit 325" "Low,High" textline " " bitfld.long 0x00 4. " IRQS324 ,IRQS Status Bit 324" "Low,High" bitfld.long 0x00 3. " IRQS323 ,IRQS Status Bit 323" "Low,High" bitfld.long 0x00 2. " IRQS322 ,IRQS Status Bit 322" "Low,High" textline " " bitfld.long 0x00 1. " IRQS321 ,IRQS Status Bit 321" "Low,High" bitfld.long 0x00 0. " IRQS320 ,IRQS Status Bit 320" "Low,High" else rgroup.long 0x0D2C++0x03 line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0C) rgroup.long 0x0D30++0x03 line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" bitfld.long 0x00 31. " IRQS383 ,IRQS Status Bit 383" "Low,High" bitfld.long 0x00 30. " IRQS382 ,IRQS Status Bit 382" "Low,High" bitfld.long 0x00 29. " IRQS381 ,IRQS Status Bit 381" "Low,High" textline " " bitfld.long 0x00 28. " IRQS380 ,IRQS Status Bit 380" "Low,High" bitfld.long 0x00 27. " IRQS379 ,IRQS Status Bit 379" "Low,High" bitfld.long 0x00 26. " IRQS378 ,IRQS Status Bit 378" "Low,High" textline " " bitfld.long 0x00 25. " IRQS377 ,IRQS Status Bit 377" "Low,High" bitfld.long 0x00 24. " IRQS376 ,IRQS Status Bit 376" "Low,High" bitfld.long 0x00 23. " IRQS375 ,IRQS Status Bit 375" "Low,High" textline " " bitfld.long 0x00 22. " IRQS374 ,IRQS Status Bit 374" "Low,High" bitfld.long 0x00 21. " IRQS373 ,IRQS Status Bit 373" "Low,High" bitfld.long 0x00 20. " IRQS372 ,IRQS Status Bit 372" "Low,High" textline " " bitfld.long 0x00 19. " IRQS371 ,IRQS Status Bit 371" "Low,High" bitfld.long 0x00 18. " IRQS370 ,IRQS Status Bit 370" "Low,High" bitfld.long 0x00 17. " IRQS369 ,IRQS Status Bit 369" "Low,High" textline " " bitfld.long 0x00 16. " IRQS368 ,IRQS Status Bit 368" "Low,High" bitfld.long 0x00 15. " IRQS367 ,IRQS Status Bit 367" "Low,High" bitfld.long 0x00 14. " IRQS366 ,IRQS Status Bit 366" "Low,High" textline " " bitfld.long 0x00 13. " IRQS365 ,IRQS Status Bit 365" "Low,High" bitfld.long 0x00 12. " IRQS364 ,IRQS Status Bit 364" "Low,High" bitfld.long 0x00 11. " IRQS363 ,IRQS Status Bit 363" "Low,High" textline " " bitfld.long 0x00 10. " IRQS362 ,IRQS Status Bit 362" "Low,High" bitfld.long 0x00 9. " IRQS361 ,IRQS Status Bit 361" "Low,High" bitfld.long 0x00 8. " IRQS360 ,IRQS Status Bit 360" "Low,High" textline " " bitfld.long 0x00 7. " IRQS359 ,IRQS Status Bit 359" "Low,High" bitfld.long 0x00 6. " IRQS358 ,IRQS Status Bit 358" "Low,High" bitfld.long 0x00 5. " IRQS357 ,IRQS Status Bit 357" "Low,High" textline " " bitfld.long 0x00 4. " IRQS356 ,IRQS Status Bit 356" "Low,High" bitfld.long 0x00 3. " IRQS355 ,IRQS Status Bit 355" "Low,High" bitfld.long 0x00 2. " IRQS354 ,IRQS Status Bit 354" "Low,High" textline " " bitfld.long 0x00 1. " IRQS353 ,IRQS Status Bit 353" "Low,High" bitfld.long 0x00 0. " IRQS352 ,IRQS Status Bit 352" "Low,High" else rgroup.long 0x0D30++0x03 line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0D) rgroup.long 0x0D34++0x03 line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" bitfld.long 0x00 31. " IRQS415 ,IRQS Status Bit 415" "Low,High" bitfld.long 0x00 30. " IRQS414 ,IRQS Status Bit 414" "Low,High" bitfld.long 0x00 29. " IRQS413 ,IRQS Status Bit 413" "Low,High" textline " " bitfld.long 0x00 28. " IRQS412 ,IRQS Status Bit 412" "Low,High" bitfld.long 0x00 27. " IRQS411 ,IRQS Status Bit 411" "Low,High" bitfld.long 0x00 26. " IRQS410 ,IRQS Status Bit 410" "Low,High" textline " " bitfld.long 0x00 25. " IRQS409 ,IRQS Status Bit 409" "Low,High" bitfld.long 0x00 24. " IRQS408 ,IRQS Status Bit 408" "Low,High" bitfld.long 0x00 23. " IRQS407 ,IRQS Status Bit 407" "Low,High" textline " " bitfld.long 0x00 22. " IRQS406 ,IRQS Status Bit 406" "Low,High" bitfld.long 0x00 21. " IRQS405 ,IRQS Status Bit 405" "Low,High" bitfld.long 0x00 20. " IRQS404 ,IRQS Status Bit 404" "Low,High" textline " " bitfld.long 0x00 19. " IRQS403 ,IRQS Status Bit 403" "Low,High" bitfld.long 0x00 18. " IRQS402 ,IRQS Status Bit 402" "Low,High" bitfld.long 0x00 17. " IRQS401 ,IRQS Status Bit 401" "Low,High" textline " " bitfld.long 0x00 16. " IRQS400 ,IRQS Status Bit 400" "Low,High" bitfld.long 0x00 15. " IRQS399 ,IRQS Status Bit 399" "Low,High" bitfld.long 0x00 14. " IRQS398 ,IRQS Status Bit 398" "Low,High" textline " " bitfld.long 0x00 13. " IRQS397 ,IRQS Status Bit 397" "Low,High" bitfld.long 0x00 12. " IRQS396 ,IRQS Status Bit 396" "Low,High" bitfld.long 0x00 11. " IRQS395 ,IRQS Status Bit 395" "Low,High" textline " " bitfld.long 0x00 10. " IRQS394 ,IRQS Status Bit 394" "Low,High" bitfld.long 0x00 9. " IRQS393 ,IRQS Status Bit 393" "Low,High" bitfld.long 0x00 8. " IRQS392 ,IRQS Status Bit 392" "Low,High" textline " " bitfld.long 0x00 7. " IRQS391 ,IRQS Status Bit 391" "Low,High" bitfld.long 0x00 6. " IRQS390 ,IRQS Status Bit 390" "Low,High" bitfld.long 0x00 5. " IRQS389 ,IRQS Status Bit 389" "Low,High" textline " " bitfld.long 0x00 4. " IRQS388 ,IRQS Status Bit 388" "Low,High" bitfld.long 0x00 3. " IRQS387 ,IRQS Status Bit 387" "Low,High" bitfld.long 0x00 2. " IRQS386 ,IRQS Status Bit 386" "Low,High" textline " " bitfld.long 0x00 1. " IRQS385 ,IRQS Status Bit 385" "Low,High" bitfld.long 0x00 0. " IRQS384 ,IRQS Status Bit 384" "Low,High" else rgroup.long 0x0D34++0x03 line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0E) rgroup.long 0x0D38++0x03 line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" bitfld.long 0x00 31. " IRQS447 ,IRQS Status Bit 447" "Low,High" bitfld.long 0x00 30. " IRQS446 ,IRQS Status Bit 446" "Low,High" bitfld.long 0x00 29. " IRQS445 ,IRQS Status Bit 445" "Low,High" textline " " bitfld.long 0x00 28. " IRQS444 ,IRQS Status Bit 444" "Low,High" bitfld.long 0x00 27. " IRQS443 ,IRQS Status Bit 443" "Low,High" bitfld.long 0x00 26. " IRQS442 ,IRQS Status Bit 442" "Low,High" textline " " bitfld.long 0x00 25. " IRQS441 ,IRQS Status Bit 441" "Low,High" bitfld.long 0x00 24. " IRQS440 ,IRQS Status Bit 440" "Low,High" bitfld.long 0x00 23. " IRQS439 ,IRQS Status Bit 439" "Low,High" textline " " bitfld.long 0x00 22. " IRQS438 ,IRQS Status Bit 438" "Low,High" bitfld.long 0x00 21. " IRQS437 ,IRQS Status Bit 437" "Low,High" bitfld.long 0x00 20. " IRQS436 ,IRQS Status Bit 436" "Low,High" textline " " bitfld.long 0x00 19. " IRQS435 ,IRQS Status Bit 435" "Low,High" bitfld.long 0x00 18. " IRQS434 ,IRQS Status Bit 434" "Low,High" bitfld.long 0x00 17. " IRQS433 ,IRQS Status Bit 433" "Low,High" textline " " bitfld.long 0x00 16. " IRQS432 ,IRQS Status Bit 432" "Low,High" bitfld.long 0x00 15. " IRQS431 ,IRQS Status Bit 431" "Low,High" bitfld.long 0x00 14. " IRQS430 ,IRQS Status Bit 430" "Low,High" textline " " bitfld.long 0x00 13. " IRQS429 ,IRQS Status Bit 429" "Low,High" bitfld.long 0x00 12. " IRQS428 ,IRQS Status Bit 428" "Low,High" bitfld.long 0x00 11. " IRQS427 ,IRQS Status Bit 427" "Low,High" textline " " bitfld.long 0x00 10. " IRQS426 ,IRQS Status Bit 426" "Low,High" bitfld.long 0x00 9. " IRQS425 ,IRQS Status Bit 425" "Low,High" bitfld.long 0x00 8. " IRQS424 ,IRQS Status Bit 424" "Low,High" textline " " bitfld.long 0x00 7. " IRQS423 ,IRQS Status Bit 423" "Low,High" bitfld.long 0x00 6. " IRQS422 ,IRQS Status Bit 422" "Low,High" bitfld.long 0x00 5. " IRQS421 ,IRQS Status Bit 421" "Low,High" textline " " bitfld.long 0x00 4. " IRQS420 ,IRQS Status Bit 420" "Low,High" bitfld.long 0x00 3. " IRQS419 ,IRQS Status Bit 419" "Low,High" bitfld.long 0x00 2. " IRQS418 ,IRQS Status Bit 418" "Low,High" textline " " bitfld.long 0x00 1. " IRQS417 ,IRQS Status Bit 417" "Low,High" bitfld.long 0x00 0. " IRQS416 ,IRQS Status Bit 416" "Low,High" else rgroup.long 0x0D38++0x03 line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x0F) rgroup.long 0x0D3C++0x03 line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" bitfld.long 0x00 31. " IRQS479 ,IRQS Status Bit 479" "Low,High" bitfld.long 0x00 30. " IRQS478 ,IRQS Status Bit 478" "Low,High" bitfld.long 0x00 29. " IRQS477 ,IRQS Status Bit 477" "Low,High" textline " " bitfld.long 0x00 28. " IRQS476 ,IRQS Status Bit 476" "Low,High" bitfld.long 0x00 27. " IRQS475 ,IRQS Status Bit 475" "Low,High" bitfld.long 0x00 26. " IRQS474 ,IRQS Status Bit 474" "Low,High" textline " " bitfld.long 0x00 25. " IRQS473 ,IRQS Status Bit 473" "Low,High" bitfld.long 0x00 24. " IRQS472 ,IRQS Status Bit 472" "Low,High" bitfld.long 0x00 23. " IRQS471 ,IRQS Status Bit 471" "Low,High" textline " " bitfld.long 0x00 22. " IRQS470 ,IRQS Status Bit 470" "Low,High" bitfld.long 0x00 21. " IRQS469 ,IRQS Status Bit 469" "Low,High" bitfld.long 0x00 20. " IRQS468 ,IRQS Status Bit 468" "Low,High" textline " " bitfld.long 0x00 19. " IRQS467 ,IRQS Status Bit 467" "Low,High" bitfld.long 0x00 18. " IRQS466 ,IRQS Status Bit 466" "Low,High" bitfld.long 0x00 17. " IRQS465 ,IRQS Status Bit 465" "Low,High" textline " " bitfld.long 0x00 16. " IRQS464 ,IRQS Status Bit 464" "Low,High" bitfld.long 0x00 15. " IRQS463 ,IRQS Status Bit 463" "Low,High" bitfld.long 0x00 14. " IRQS462 ,IRQS Status Bit 462" "Low,High" textline " " bitfld.long 0x00 13. " IRQS461 ,IRQS Status Bit 461" "Low,High" bitfld.long 0x00 12. " IRQS460 ,IRQS Status Bit 460" "Low,High" bitfld.long 0x00 11. " IRQS459 ,IRQS Status Bit 459" "Low,High" textline " " bitfld.long 0x00 10. " IRQS458 ,IRQS Status Bit 458" "Low,High" bitfld.long 0x00 9. " IRQS457 ,IRQS Status Bit 457" "Low,High" bitfld.long 0x00 8. " IRQS456 ,IRQS Status Bit 456" "Low,High" textline " " bitfld.long 0x00 7. " IRQS455 ,IRQS Status Bit 455" "Low,High" bitfld.long 0x00 6. " IRQS454 ,IRQS Status Bit 454" "Low,High" bitfld.long 0x00 5. " IRQS453 ,IRQS Status Bit 453" "Low,High" textline " " bitfld.long 0x00 4. " IRQS452 ,IRQS Status Bit 452" "Low,High" bitfld.long 0x00 3. " IRQS451 ,IRQS Status Bit 451" "Low,High" bitfld.long 0x00 2. " IRQS450 ,IRQS Status Bit 450" "Low,High" textline " " bitfld.long 0x00 1. " IRQS449 ,IRQS Status Bit 449" "Low,High" bitfld.long 0x00 0. " IRQS448 ,IRQS Status Bit 448" "Low,High" else rgroup.long 0x0D3C++0x03 line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x10) rgroup.long 0x0D40++0x03 line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" bitfld.long 0x00 31. " IRQS511 ,IRQS Status Bit 511" "Low,High" bitfld.long 0x00 30. " IRQS510 ,IRQS Status Bit 510" "Low,High" bitfld.long 0x00 29. " IRQS509 ,IRQS Status Bit 509" "Low,High" textline " " bitfld.long 0x00 28. " IRQS508 ,IRQS Status Bit 508" "Low,High" bitfld.long 0x00 27. " IRQS507 ,IRQS Status Bit 507" "Low,High" bitfld.long 0x00 26. " IRQS506 ,IRQS Status Bit 506" "Low,High" textline " " bitfld.long 0x00 25. " IRQS505 ,IRQS Status Bit 505" "Low,High" bitfld.long 0x00 24. " IRQS504 ,IRQS Status Bit 504" "Low,High" bitfld.long 0x00 23. " IRQS503 ,IRQS Status Bit 503" "Low,High" textline " " bitfld.long 0x00 22. " IRQS502 ,IRQS Status Bit 502" "Low,High" bitfld.long 0x00 21. " IRQS501 ,IRQS Status Bit 501" "Low,High" bitfld.long 0x00 20. " IRQS500 ,IRQS Status Bit 500" "Low,High" textline " " bitfld.long 0x00 19. " IRQS499 ,IRQS Status Bit 499" "Low,High" bitfld.long 0x00 18. " IRQS498 ,IRQS Status Bit 498" "Low,High" bitfld.long 0x00 17. " IRQS497 ,IRQS Status Bit 497" "Low,High" textline " " bitfld.long 0x00 16. " IRQS496 ,IRQS Status Bit 496" "Low,High" bitfld.long 0x00 15. " IRQS495 ,IRQS Status Bit 495" "Low,High" bitfld.long 0x00 14. " IRQS494 ,IRQS Status Bit 494" "Low,High" textline " " bitfld.long 0x00 13. " IRQS493 ,IRQS Status Bit 493" "Low,High" bitfld.long 0x00 12. " IRQS492 ,IRQS Status Bit 492" "Low,High" bitfld.long 0x00 11. " IRQS491 ,IRQS Status Bit 491" "Low,High" textline " " bitfld.long 0x00 10. " IRQS490 ,IRQS Status Bit 490" "Low,High" bitfld.long 0x00 9. " IRQS489 ,IRQS Status Bit 489" "Low,High" bitfld.long 0x00 8. " IRQS488 ,IRQS Status Bit 488" "Low,High" textline " " bitfld.long 0x00 7. " IRQS487 ,IRQS Status Bit 487" "Low,High" bitfld.long 0x00 6. " IRQS486 ,IRQS Status Bit 486" "Low,High" bitfld.long 0x00 5. " IRQS485 ,IRQS Status Bit 485" "Low,High" textline " " bitfld.long 0x00 4. " IRQS484 ,IRQS Status Bit 484" "Low,High" bitfld.long 0x00 3. " IRQS483 ,IRQS Status Bit 483" "Low,High" bitfld.long 0x00 2. " IRQS482 ,IRQS Status Bit 482" "Low,High" textline " " bitfld.long 0x00 1. " IRQS481 ,IRQS Status Bit 481" "Low,High" bitfld.long 0x00 0. " IRQS480 ,IRQS Status Bit 480" "Low,High" else rgroup.long 0x0D40++0x03 line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x11) rgroup.long 0x0D44++0x03 line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" bitfld.long 0x00 31. " IRQS543 ,IRQS Status Bit 543" "Low,High" bitfld.long 0x00 30. " IRQS542 ,IRQS Status Bit 542" "Low,High" bitfld.long 0x00 29. " IRQS541 ,IRQS Status Bit 541" "Low,High" textline " " bitfld.long 0x00 28. " IRQS540 ,IRQS Status Bit 540" "Low,High" bitfld.long 0x00 27. " IRQS539 ,IRQS Status Bit 539" "Low,High" bitfld.long 0x00 26. " IRQS538 ,IRQS Status Bit 538" "Low,High" textline " " bitfld.long 0x00 25. " IRQS537 ,IRQS Status Bit 537" "Low,High" bitfld.long 0x00 24. " IRQS536 ,IRQS Status Bit 536" "Low,High" bitfld.long 0x00 23. " IRQS535 ,IRQS Status Bit 535" "Low,High" textline " " bitfld.long 0x00 22. " IRQS534 ,IRQS Status Bit 534" "Low,High" bitfld.long 0x00 21. " IRQS533 ,IRQS Status Bit 533" "Low,High" bitfld.long 0x00 20. " IRQS532 ,IRQS Status Bit 532" "Low,High" textline " " bitfld.long 0x00 19. " IRQS531 ,IRQS Status Bit 531" "Low,High" bitfld.long 0x00 18. " IRQS530 ,IRQS Status Bit 530" "Low,High" bitfld.long 0x00 17. " IRQS529 ,IRQS Status Bit 529" "Low,High" textline " " bitfld.long 0x00 16. " IRQS528 ,IRQS Status Bit 528" "Low,High" bitfld.long 0x00 15. " IRQS527 ,IRQS Status Bit 527" "Low,High" bitfld.long 0x00 14. " IRQS526 ,IRQS Status Bit 526" "Low,High" textline " " bitfld.long 0x00 13. " IRQS525 ,IRQS Status Bit 525" "Low,High" bitfld.long 0x00 12. " IRQS524 ,IRQS Status Bit 524" "Low,High" bitfld.long 0x00 11. " IRQS523 ,IRQS Status Bit 523" "Low,High" textline " " bitfld.long 0x00 10. " IRQS522 ,IRQS Status Bit 522" "Low,High" bitfld.long 0x00 9. " IRQS521 ,IRQS Status Bit 521" "Low,High" bitfld.long 0x00 8. " IRQS520 ,IRQS Status Bit 520" "Low,High" textline " " bitfld.long 0x00 7. " IRQS519 ,IRQS Status Bit 519" "Low,High" bitfld.long 0x00 6. " IRQS518 ,IRQS Status Bit 518" "Low,High" bitfld.long 0x00 5. " IRQS517 ,IRQS Status Bit 517" "Low,High" textline " " bitfld.long 0x00 4. " IRQS516 ,IRQS Status Bit 516" "Low,High" bitfld.long 0x00 3. " IRQS515 ,IRQS Status Bit 515" "Low,High" bitfld.long 0x00 2. " IRQS514 ,IRQS Status Bit 514" "Low,High" textline " " bitfld.long 0x00 1. " IRQS513 ,IRQS Status Bit 513" "Low,High" bitfld.long 0x00 0. " IRQS512 ,IRQS Status Bit 512" "Low,High" else rgroup.long 0x0D44++0x03 line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x12) rgroup.long 0x0D48++0x03 line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" bitfld.long 0x00 31. " IRQS575 ,IRQS Status Bit 575" "Low,High" bitfld.long 0x00 30. " IRQS574 ,IRQS Status Bit 574" "Low,High" bitfld.long 0x00 29. " IRQS573 ,IRQS Status Bit 573" "Low,High" textline " " bitfld.long 0x00 28. " IRQS572 ,IRQS Status Bit 572" "Low,High" bitfld.long 0x00 27. " IRQS571 ,IRQS Status Bit 571" "Low,High" bitfld.long 0x00 26. " IRQS570 ,IRQS Status Bit 570" "Low,High" textline " " bitfld.long 0x00 25. " IRQS569 ,IRQS Status Bit 569" "Low,High" bitfld.long 0x00 24. " IRQS568 ,IRQS Status Bit 568" "Low,High" bitfld.long 0x00 23. " IRQS567 ,IRQS Status Bit 567" "Low,High" textline " " bitfld.long 0x00 22. " IRQS566 ,IRQS Status Bit 566" "Low,High" bitfld.long 0x00 21. " IRQS565 ,IRQS Status Bit 565" "Low,High" bitfld.long 0x00 20. " IRQS564 ,IRQS Status Bit 564" "Low,High" textline " " bitfld.long 0x00 19. " IRQS563 ,IRQS Status Bit 563" "Low,High" bitfld.long 0x00 18. " IRQS562 ,IRQS Status Bit 562" "Low,High" bitfld.long 0x00 17. " IRQS561 ,IRQS Status Bit 561" "Low,High" textline " " bitfld.long 0x00 16. " IRQS560 ,IRQS Status Bit 560" "Low,High" bitfld.long 0x00 15. " IRQS559 ,IRQS Status Bit 559" "Low,High" bitfld.long 0x00 14. " IRQS558 ,IRQS Status Bit 558" "Low,High" textline " " bitfld.long 0x00 13. " IRQS557 ,IRQS Status Bit 557" "Low,High" bitfld.long 0x00 12. " IRQS556 ,IRQS Status Bit 556" "Low,High" bitfld.long 0x00 11. " IRQS555 ,IRQS Status Bit 555" "Low,High" textline " " bitfld.long 0x00 10. " IRQS554 ,IRQS Status Bit 554" "Low,High" bitfld.long 0x00 9. " IRQS553 ,IRQS Status Bit 553" "Low,High" bitfld.long 0x00 8. " IRQS552 ,IRQS Status Bit 552" "Low,High" textline " " bitfld.long 0x00 7. " IRQS551 ,IRQS Status Bit 551" "Low,High" bitfld.long 0x00 6. " IRQS550 ,IRQS Status Bit 550" "Low,High" bitfld.long 0x00 5. " IRQS549 ,IRQS Status Bit 549" "Low,High" textline " " bitfld.long 0x00 4. " IRQS548 ,IRQS Status Bit 548" "Low,High" bitfld.long 0x00 3. " IRQS547 ,IRQS Status Bit 547" "Low,High" bitfld.long 0x00 2. " IRQS546 ,IRQS Status Bit 546" "Low,High" textline " " bitfld.long 0x00 1. " IRQS545 ,IRQS Status Bit 545" "Low,High" bitfld.long 0x00 0. " IRQS544 ,IRQS Status Bit 544" "Low,High" else rgroup.long 0x0D48++0x03 line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x13) rgroup.long 0x0D4C++0x03 line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" bitfld.long 0x00 31. " IRQS607 ,IRQS Status Bit 607" "Low,High" bitfld.long 0x00 30. " IRQS606 ,IRQS Status Bit 606" "Low,High" bitfld.long 0x00 29. " IRQS605 ,IRQS Status Bit 605" "Low,High" textline " " bitfld.long 0x00 28. " IRQS604 ,IRQS Status Bit 604" "Low,High" bitfld.long 0x00 27. " IRQS603 ,IRQS Status Bit 603" "Low,High" bitfld.long 0x00 26. " IRQS602 ,IRQS Status Bit 602" "Low,High" textline " " bitfld.long 0x00 25. " IRQS601 ,IRQS Status Bit 601" "Low,High" bitfld.long 0x00 24. " IRQS600 ,IRQS Status Bit 600" "Low,High" bitfld.long 0x00 23. " IRQS599 ,IRQS Status Bit 599" "Low,High" textline " " bitfld.long 0x00 22. " IRQS598 ,IRQS Status Bit 598" "Low,High" bitfld.long 0x00 21. " IRQS597 ,IRQS Status Bit 597" "Low,High" bitfld.long 0x00 20. " IRQS596 ,IRQS Status Bit 596" "Low,High" textline " " bitfld.long 0x00 19. " IRQS595 ,IRQS Status Bit 595" "Low,High" bitfld.long 0x00 18. " IRQS594 ,IRQS Status Bit 594" "Low,High" bitfld.long 0x00 17. " IRQS593 ,IRQS Status Bit 593" "Low,High" textline " " bitfld.long 0x00 16. " IRQS592 ,IRQS Status Bit 592" "Low,High" bitfld.long 0x00 15. " IRQS591 ,IRQS Status Bit 591" "Low,High" bitfld.long 0x00 14. " IRQS590 ,IRQS Status Bit 590" "Low,High" textline " " bitfld.long 0x00 13. " IRQS589 ,IRQS Status Bit 589" "Low,High" bitfld.long 0x00 12. " IRQS588 ,IRQS Status Bit 588" "Low,High" bitfld.long 0x00 11. " IRQS587 ,IRQS Status Bit 587" "Low,High" textline " " bitfld.long 0x00 10. " IRQS586 ,IRQS Status Bit 586" "Low,High" bitfld.long 0x00 9. " IRQS585 ,IRQS Status Bit 585" "Low,High" bitfld.long 0x00 8. " IRQS584 ,IRQS Status Bit 584" "Low,High" textline " " bitfld.long 0x00 7. " IRQS583 ,IRQS Status Bit 583" "Low,High" bitfld.long 0x00 6. " IRQS582 ,IRQS Status Bit 582" "Low,High" bitfld.long 0x00 5. " IRQS581 ,IRQS Status Bit 581" "Low,High" textline " " bitfld.long 0x00 4. " IRQS580 ,IRQS Status Bit 580" "Low,High" bitfld.long 0x00 3. " IRQS579 ,IRQS Status Bit 579" "Low,High" bitfld.long 0x00 2. " IRQS578 ,IRQS Status Bit 578" "Low,High" textline " " bitfld.long 0x00 1. " IRQS577 ,IRQS Status Bit 577" "Low,High" bitfld.long 0x00 0. " IRQS576 ,IRQS Status Bit 576" "Low,High" else rgroup.long 0x0D4C++0x03 line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x14) rgroup.long 0x0D50++0x03 line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" bitfld.long 0x00 31. " IRQS639 ,IRQS Status Bit 639" "Low,High" bitfld.long 0x00 30. " IRQS638 ,IRQS Status Bit 638" "Low,High" bitfld.long 0x00 29. " IRQS637 ,IRQS Status Bit 637" "Low,High" textline " " bitfld.long 0x00 28. " IRQS636 ,IRQS Status Bit 636" "Low,High" bitfld.long 0x00 27. " IRQS635 ,IRQS Status Bit 635" "Low,High" bitfld.long 0x00 26. " IRQS634 ,IRQS Status Bit 634" "Low,High" textline " " bitfld.long 0x00 25. " IRQS633 ,IRQS Status Bit 633" "Low,High" bitfld.long 0x00 24. " IRQS632 ,IRQS Status Bit 632" "Low,High" bitfld.long 0x00 23. " IRQS631 ,IRQS Status Bit 631" "Low,High" textline " " bitfld.long 0x00 22. " IRQS630 ,IRQS Status Bit 630" "Low,High" bitfld.long 0x00 21. " IRQS629 ,IRQS Status Bit 629" "Low,High" bitfld.long 0x00 20. " IRQS628 ,IRQS Status Bit 628" "Low,High" textline " " bitfld.long 0x00 19. " IRQS627 ,IRQS Status Bit 627" "Low,High" bitfld.long 0x00 18. " IRQS626 ,IRQS Status Bit 626" "Low,High" bitfld.long 0x00 17. " IRQS625 ,IRQS Status Bit 625" "Low,High" textline " " bitfld.long 0x00 16. " IRQS624 ,IRQS Status Bit 624" "Low,High" bitfld.long 0x00 15. " IRQS623 ,IRQS Status Bit 623" "Low,High" bitfld.long 0x00 14. " IRQS622 ,IRQS Status Bit 622" "Low,High" textline " " bitfld.long 0x00 13. " IRQS621 ,IRQS Status Bit 621" "Low,High" bitfld.long 0x00 12. " IRQS620 ,IRQS Status Bit 620" "Low,High" bitfld.long 0x00 11. " IRQS619 ,IRQS Status Bit 619" "Low,High" textline " " bitfld.long 0x00 10. " IRQS618 ,IRQS Status Bit 618" "Low,High" bitfld.long 0x00 9. " IRQS617 ,IRQS Status Bit 617" "Low,High" bitfld.long 0x00 8. " IRQS616 ,IRQS Status Bit 616" "Low,High" textline " " bitfld.long 0x00 7. " IRQS615 ,IRQS Status Bit 615" "Low,High" bitfld.long 0x00 6. " IRQS614 ,IRQS Status Bit 614" "Low,High" bitfld.long 0x00 5. " IRQS613 ,IRQS Status Bit 613" "Low,High" textline " " bitfld.long 0x00 4. " IRQS612 ,IRQS Status Bit 612" "Low,High" bitfld.long 0x00 3. " IRQS611 ,IRQS Status Bit 611" "Low,High" bitfld.long 0x00 2. " IRQS610 ,IRQS Status Bit 610" "Low,High" textline " " bitfld.long 0x00 1. " IRQS609 ,IRQS Status Bit 609" "Low,High" bitfld.long 0x00 0. " IRQS608 ,IRQS Status Bit 608" "Low,High" else rgroup.long 0x0D50++0x03 line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x15) rgroup.long 0x0D54++0x03 line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" bitfld.long 0x00 31. " IRQS671 ,IRQS Status Bit 671" "Low,High" bitfld.long 0x00 30. " IRQS670 ,IRQS Status Bit 670" "Low,High" bitfld.long 0x00 29. " IRQS669 ,IRQS Status Bit 669" "Low,High" textline " " bitfld.long 0x00 28. " IRQS668 ,IRQS Status Bit 668" "Low,High" bitfld.long 0x00 27. " IRQS667 ,IRQS Status Bit 667" "Low,High" bitfld.long 0x00 26. " IRQS666 ,IRQS Status Bit 666" "Low,High" textline " " bitfld.long 0x00 25. " IRQS665 ,IRQS Status Bit 665" "Low,High" bitfld.long 0x00 24. " IRQS664 ,IRQS Status Bit 664" "Low,High" bitfld.long 0x00 23. " IRQS663 ,IRQS Status Bit 663" "Low,High" textline " " bitfld.long 0x00 22. " IRQS662 ,IRQS Status Bit 662" "Low,High" bitfld.long 0x00 21. " IRQS661 ,IRQS Status Bit 661" "Low,High" bitfld.long 0x00 20. " IRQS660 ,IRQS Status Bit 660" "Low,High" textline " " bitfld.long 0x00 19. " IRQS659 ,IRQS Status Bit 659" "Low,High" bitfld.long 0x00 18. " IRQS658 ,IRQS Status Bit 658" "Low,High" bitfld.long 0x00 17. " IRQS657 ,IRQS Status Bit 657" "Low,High" textline " " bitfld.long 0x00 16. " IRQS656 ,IRQS Status Bit 656" "Low,High" bitfld.long 0x00 15. " IRQS655 ,IRQS Status Bit 655" "Low,High" bitfld.long 0x00 14. " IRQS654 ,IRQS Status Bit 654" "Low,High" textline " " bitfld.long 0x00 13. " IRQS653 ,IRQS Status Bit 653" "Low,High" bitfld.long 0x00 12. " IRQS652 ,IRQS Status Bit 652" "Low,High" bitfld.long 0x00 11. " IRQS651 ,IRQS Status Bit 651" "Low,High" textline " " bitfld.long 0x00 10. " IRQS650 ,IRQS Status Bit 650" "Low,High" bitfld.long 0x00 9. " IRQS649 ,IRQS Status Bit 649" "Low,High" bitfld.long 0x00 8. " IRQS648 ,IRQS Status Bit 648" "Low,High" textline " " bitfld.long 0x00 7. " IRQS647 ,IRQS Status Bit 647" "Low,High" bitfld.long 0x00 6. " IRQS646 ,IRQS Status Bit 646" "Low,High" bitfld.long 0x00 5. " IRQS645 ,IRQS Status Bit 645" "Low,High" textline " " bitfld.long 0x00 4. " IRQS644 ,IRQS Status Bit 644" "Low,High" bitfld.long 0x00 3. " IRQS643 ,IRQS Status Bit 643" "Low,High" bitfld.long 0x00 2. " IRQS642 ,IRQS Status Bit 642" "Low,High" textline " " bitfld.long 0x00 1. " IRQS641 ,IRQS Status Bit 641" "Low,High" bitfld.long 0x00 0. " IRQS640 ,IRQS Status Bit 640" "Low,High" else rgroup.long 0x0D54++0x03 line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x16) rgroup.long 0x0D58++0x03 line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" bitfld.long 0x00 31. " IRQS703 ,IRQS Status Bit 703" "Low,High" bitfld.long 0x00 30. " IRQS702 ,IRQS Status Bit 702" "Low,High" bitfld.long 0x00 29. " IRQS701 ,IRQS Status Bit 701" "Low,High" textline " " bitfld.long 0x00 28. " IRQS700 ,IRQS Status Bit 700" "Low,High" bitfld.long 0x00 27. " IRQS699 ,IRQS Status Bit 699" "Low,High" bitfld.long 0x00 26. " IRQS698 ,IRQS Status Bit 698" "Low,High" textline " " bitfld.long 0x00 25. " IRQS697 ,IRQS Status Bit 697" "Low,High" bitfld.long 0x00 24. " IRQS696 ,IRQS Status Bit 696" "Low,High" bitfld.long 0x00 23. " IRQS695 ,IRQS Status Bit 695" "Low,High" textline " " bitfld.long 0x00 22. " IRQS694 ,IRQS Status Bit 694" "Low,High" bitfld.long 0x00 21. " IRQS693 ,IRQS Status Bit 693" "Low,High" bitfld.long 0x00 20. " IRQS692 ,IRQS Status Bit 692" "Low,High" textline " " bitfld.long 0x00 19. " IRQS691 ,IRQS Status Bit 691" "Low,High" bitfld.long 0x00 18. " IRQS690 ,IRQS Status Bit 690" "Low,High" bitfld.long 0x00 17. " IRQS689 ,IRQS Status Bit 689" "Low,High" textline " " bitfld.long 0x00 16. " IRQS688 ,IRQS Status Bit 688" "Low,High" bitfld.long 0x00 15. " IRQS687 ,IRQS Status Bit 687" "Low,High" bitfld.long 0x00 14. " IRQS686 ,IRQS Status Bit 686" "Low,High" textline " " bitfld.long 0x00 13. " IRQS685 ,IRQS Status Bit 685" "Low,High" bitfld.long 0x00 12. " IRQS684 ,IRQS Status Bit 684" "Low,High" bitfld.long 0x00 11. " IRQS683 ,IRQS Status Bit 683" "Low,High" textline " " bitfld.long 0x00 10. " IRQS682 ,IRQS Status Bit 682" "Low,High" bitfld.long 0x00 9. " IRQS681 ,IRQS Status Bit 681" "Low,High" bitfld.long 0x00 8. " IRQS680 ,IRQS Status Bit 680" "Low,High" textline " " bitfld.long 0x00 7. " IRQS679 ,IRQS Status Bit 679" "Low,High" bitfld.long 0x00 6. " IRQS678 ,IRQS Status Bit 678" "Low,High" bitfld.long 0x00 5. " IRQS677 ,IRQS Status Bit 677" "Low,High" textline " " bitfld.long 0x00 4. " IRQS676 ,IRQS Status Bit 676" "Low,High" bitfld.long 0x00 3. " IRQS675 ,IRQS Status Bit 675" "Low,High" bitfld.long 0x00 2. " IRQS674 ,IRQS Status Bit 674" "Low,High" textline " " bitfld.long 0x00 1. " IRQS673 ,IRQS Status Bit 673" "Low,High" bitfld.long 0x00 0. " IRQS672 ,IRQS Status Bit 672" "Low,High" else rgroup.long 0x0D58++0x03 line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x17) rgroup.long 0x0D5C++0x03 line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" bitfld.long 0x00 31. " IRQS735 ,IRQS Status Bit 735" "Low,High" bitfld.long 0x00 30. " IRQS734 ,IRQS Status Bit 734" "Low,High" bitfld.long 0x00 29. " IRQS733 ,IRQS Status Bit 733" "Low,High" textline " " bitfld.long 0x00 28. " IRQS732 ,IRQS Status Bit 732" "Low,High" bitfld.long 0x00 27. " IRQS731 ,IRQS Status Bit 731" "Low,High" bitfld.long 0x00 26. " IRQS730 ,IRQS Status Bit 730" "Low,High" textline " " bitfld.long 0x00 25. " IRQS729 ,IRQS Status Bit 729" "Low,High" bitfld.long 0x00 24. " IRQS728 ,IRQS Status Bit 728" "Low,High" bitfld.long 0x00 23. " IRQS727 ,IRQS Status Bit 727" "Low,High" textline " " bitfld.long 0x00 22. " IRQS726 ,IRQS Status Bit 726" "Low,High" bitfld.long 0x00 21. " IRQS725 ,IRQS Status Bit 725" "Low,High" bitfld.long 0x00 20. " IRQS724 ,IRQS Status Bit 724" "Low,High" textline " " bitfld.long 0x00 19. " IRQS723 ,IRQS Status Bit 723" "Low,High" bitfld.long 0x00 18. " IRQS722 ,IRQS Status Bit 722" "Low,High" bitfld.long 0x00 17. " IRQS721 ,IRQS Status Bit 721" "Low,High" textline " " bitfld.long 0x00 16. " IRQS720 ,IRQS Status Bit 720" "Low,High" bitfld.long 0x00 15. " IRQS719 ,IRQS Status Bit 719" "Low,High" bitfld.long 0x00 14. " IRQS718 ,IRQS Status Bit 718" "Low,High" textline " " bitfld.long 0x00 13. " IRQS717 ,IRQS Status Bit 717" "Low,High" bitfld.long 0x00 12. " IRQS716 ,IRQS Status Bit 716" "Low,High" bitfld.long 0x00 11. " IRQS715 ,IRQS Status Bit 715" "Low,High" textline " " bitfld.long 0x00 10. " IRQS714 ,IRQS Status Bit 714" "Low,High" bitfld.long 0x00 9. " IRQS713 ,IRQS Status Bit 713" "Low,High" bitfld.long 0x00 8. " IRQS712 ,IRQS Status Bit 712" "Low,High" textline " " bitfld.long 0x00 7. " IRQS711 ,IRQS Status Bit 711" "Low,High" bitfld.long 0x00 6. " IRQS710 ,IRQS Status Bit 710" "Low,High" bitfld.long 0x00 5. " IRQS709 ,IRQS Status Bit 709" "Low,High" textline " " bitfld.long 0x00 4. " IRQS708 ,IRQS Status Bit 708" "Low,High" bitfld.long 0x00 3. " IRQS707 ,IRQS Status Bit 707" "Low,High" bitfld.long 0x00 2. " IRQS706 ,IRQS Status Bit 706" "Low,High" textline " " bitfld.long 0x00 1. " IRQS705 ,IRQS Status Bit 705" "Low,High" bitfld.long 0x00 0. " IRQS704 ,IRQS Status Bit 704" "Low,High" else rgroup.long 0x0D5C++0x03 line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x18) rgroup.long 0x060++0x03 line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" bitfld.long 0x00 31. " IRQS767 ,IRQS Status Bit 767" "Low,High" bitfld.long 0x00 30. " IRQS766 ,IRQS Status Bit 766" "Low,High" bitfld.long 0x00 29. " IRQS765 ,IRQS Status Bit 765" "Low,High" textline " " bitfld.long 0x00 28. " IRQS764 ,IRQS Status Bit 764" "Low,High" bitfld.long 0x00 27. " IRQS763 ,IRQS Status Bit 763" "Low,High" bitfld.long 0x00 26. " IRQS762 ,IRQS Status Bit 762" "Low,High" textline " " bitfld.long 0x00 25. " IRQS761 ,IRQS Status Bit 761" "Low,High" bitfld.long 0x00 24. " IRQS760 ,IRQS Status Bit 760" "Low,High" bitfld.long 0x00 23. " IRQS759 ,IRQS Status Bit 759" "Low,High" textline " " bitfld.long 0x00 22. " IRQS758 ,IRQS Status Bit 758" "Low,High" bitfld.long 0x00 21. " IRQS757 ,IRQS Status Bit 757" "Low,High" bitfld.long 0x00 20. " IRQS756 ,IRQS Status Bit 756" "Low,High" textline " " bitfld.long 0x00 19. " IRQS755 ,IRQS Status Bit 755" "Low,High" bitfld.long 0x00 18. " IRQS754 ,IRQS Status Bit 754" "Low,High" bitfld.long 0x00 17. " IRQS753 ,IRQS Status Bit 753" "Low,High" textline " " bitfld.long 0x00 16. " IRQS752 ,IRQS Status Bit 752" "Low,High" bitfld.long 0x00 15. " IRQS751 ,IRQS Status Bit 751" "Low,High" bitfld.long 0x00 14. " IRQS750 ,IRQS Status Bit 750" "Low,High" textline " " bitfld.long 0x00 13. " IRQS749 ,IRQS Status Bit 749" "Low,High" bitfld.long 0x00 12. " IRQS748 ,IRQS Status Bit 748" "Low,High" bitfld.long 0x00 11. " IRQS747 ,IRQS Status Bit 747" "Low,High" textline " " bitfld.long 0x00 10. " IRQS746 ,IRQS Status Bit 746" "Low,High" bitfld.long 0x00 9. " IRQS745 ,IRQS Status Bit 745" "Low,High" bitfld.long 0x00 8. " IRQS744 ,IRQS Status Bit 744" "Low,High" textline " " bitfld.long 0x00 7. " IRQS743 ,IRQS Status Bit 743" "Low,High" bitfld.long 0x00 6. " IRQS742 ,IRQS Status Bit 742" "Low,High" bitfld.long 0x00 5. " IRQS741 ,IRQS Status Bit 741" "Low,High" textline " " bitfld.long 0x00 4. " IRQS740 ,IRQS Status Bit 740" "Low,High" bitfld.long 0x00 3. " IRQS739 ,IRQS Status Bit 739" "Low,High" bitfld.long 0x00 2. " IRQS738 ,IRQS Status Bit 738" "Low,High" textline " " bitfld.long 0x00 1. " IRQS737 ,IRQS Status Bit 737" "Low,High" bitfld.long 0x00 0. " IRQS736 ,IRQS Status Bit 736" "Low,High" else rgroup.long 0x0D60++0x03 line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x19) rgroup.long 0x0D64++0x03 line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" bitfld.long 0x00 31. " IRQS799 ,IRQS Status Bit 799" "Low,High" bitfld.long 0x00 30. " IRQS798 ,IRQS Status Bit 798" "Low,High" bitfld.long 0x00 29. " IRQS797 ,IRQS Status Bit 797" "Low,High" textline " " bitfld.long 0x00 28. " IRQS796 ,IRQS Status Bit 796" "Low,High" bitfld.long 0x00 27. " IRQS795 ,IRQS Status Bit 795" "Low,High" bitfld.long 0x00 26. " IRQS794 ,IRQS Status Bit 794" "Low,High" textline " " bitfld.long 0x00 25. " IRQS793 ,IRQS Status Bit 793" "Low,High" bitfld.long 0x00 24. " IRQS792 ,IRQS Status Bit 792" "Low,High" bitfld.long 0x00 23. " IRQS791 ,IRQS Status Bit 791" "Low,High" textline " " bitfld.long 0x00 22. " IRQS790 ,IRQS Status Bit 790" "Low,High" bitfld.long 0x00 21. " IRQS789 ,IRQS Status Bit 789" "Low,High" bitfld.long 0x00 20. " IRQS788 ,IRQS Status Bit 788" "Low,High" textline " " bitfld.long 0x00 19. " IRQS787 ,IRQS Status Bit 787" "Low,High" bitfld.long 0x00 18. " IRQS786 ,IRQS Status Bit 786" "Low,High" bitfld.long 0x00 17. " IRQS785 ,IRQS Status Bit 785" "Low,High" textline " " bitfld.long 0x00 16. " IRQS784 ,IRQS Status Bit 784" "Low,High" bitfld.long 0x00 15. " IRQS783 ,IRQS Status Bit 783" "Low,High" bitfld.long 0x00 14. " IRQS782 ,IRQS Status Bit 782" "Low,High" textline " " bitfld.long 0x00 13. " IRQS781 ,IRQS Status Bit 781" "Low,High" bitfld.long 0x00 12. " IRQS780 ,IRQS Status Bit 780" "Low,High" bitfld.long 0x00 11. " IRQS779 ,IRQS Status Bit 779" "Low,High" textline " " bitfld.long 0x00 10. " IRQS778 ,IRQS Status Bit 778" "Low,High" bitfld.long 0x00 9. " IRQS777 ,IRQS Status Bit 777" "Low,High" bitfld.long 0x00 8. " IRQS776 ,IRQS Status Bit 776" "Low,High" textline " " bitfld.long 0x00 7. " IRQS775 ,IRQS Status Bit 775" "Low,High" bitfld.long 0x00 6. " IRQS774 ,IRQS Status Bit 774" "Low,High" bitfld.long 0x00 5. " IRQS773 ,IRQS Status Bit 773" "Low,High" textline " " bitfld.long 0x00 4. " IRQS772 ,IRQS Status Bit 772" "Low,High" bitfld.long 0x00 3. " IRQS771 ,IRQS Status Bit 771" "Low,High" bitfld.long 0x00 2. " IRQS770 ,IRQS Status Bit 770" "Low,High" textline " " bitfld.long 0x00 1. " IRQS769 ,IRQS Status Bit 769" "Low,High" bitfld.long 0x00 0. " IRQS768 ,IRQS Status Bit 768" "Low,High" else rgroup.long 0x0D64++0x03 line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1A) rgroup.long 0x0D68++0x03 line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" bitfld.long 0x00 31. " IRQS831 ,IRQS Status Bit 831" "Low,High" bitfld.long 0x00 30. " IRQS830 ,IRQS Status Bit 830" "Low,High" bitfld.long 0x00 29. " IRQS829 ,IRQS Status Bit 829" "Low,High" textline " " bitfld.long 0x00 28. " IRQS828 ,IRQS Status Bit 828" "Low,High" bitfld.long 0x00 27. " IRQS827 ,IRQS Status Bit 827" "Low,High" bitfld.long 0x00 26. " IRQS826 ,IRQS Status Bit 826" "Low,High" textline " " bitfld.long 0x00 25. " IRQS825 ,IRQS Status Bit 825" "Low,High" bitfld.long 0x00 24. " IRQS824 ,IRQS Status Bit 824" "Low,High" bitfld.long 0x00 23. " IRQS823 ,IRQS Status Bit 823" "Low,High" textline " " bitfld.long 0x00 22. " IRQS822 ,IRQS Status Bit 822" "Low,High" bitfld.long 0x00 21. " IRQS821 ,IRQS Status Bit 821" "Low,High" bitfld.long 0x00 20. " IRQS820 ,IRQS Status Bit 820" "Low,High" textline " " bitfld.long 0x00 19. " IRQS819 ,IRQS Status Bit 819" "Low,High" bitfld.long 0x00 18. " IRQS818 ,IRQS Status Bit 818" "Low,High" bitfld.long 0x00 17. " IRQS817 ,IRQS Status Bit 817" "Low,High" textline " " bitfld.long 0x00 16. " IRQS816 ,IRQS Status Bit 816" "Low,High" bitfld.long 0x00 15. " IRQS815 ,IRQS Status Bit 815" "Low,High" bitfld.long 0x00 14. " IRQS814 ,IRQS Status Bit 814" "Low,High" textline " " bitfld.long 0x00 13. " IRQS813 ,IRQS Status Bit 813" "Low,High" bitfld.long 0x00 12. " IRQS812 ,IRQS Status Bit 812" "Low,High" bitfld.long 0x00 11. " IRQS811 ,IRQS Status Bit 811" "Low,High" textline " " bitfld.long 0x00 10. " IRQS810 ,IRQS Status Bit 810" "Low,High" bitfld.long 0x00 9. " IRQS809 ,IRQS Status Bit 809" "Low,High" bitfld.long 0x00 8. " IRQS808 ,IRQS Status Bit 808" "Low,High" textline " " bitfld.long 0x00 7. " IRQS807 ,IRQS Status Bit 807" "Low,High" bitfld.long 0x00 6. " IRQS806 ,IRQS Status Bit 806" "Low,High" bitfld.long 0x00 5. " IRQS805 ,IRQS Status Bit 805" "Low,High" textline " " bitfld.long 0x00 4. " IRQS804 ,IRQS Status Bit 804" "Low,High" bitfld.long 0x00 3. " IRQS803 ,IRQS Status Bit 803" "Low,High" bitfld.long 0x00 2. " IRQS802 ,IRQS Status Bit 802" "Low,High" textline " " bitfld.long 0x00 1. " IRQS801 ,IRQS Status Bit 801" "Low,High" bitfld.long 0x00 0. " IRQS800 ,IRQS Status Bit 800" "Low,High" else rgroup.long 0x0D68++0x03 line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1B) rgroup.long 0x0D6C++0x03 line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" bitfld.long 0x00 31. " IRQS863 ,IRQS Status Bit 863" "Low,High" bitfld.long 0x00 30. " IRQS862 ,IRQS Status Bit 862" "Low,High" bitfld.long 0x00 29. " IRQS861 ,IRQS Status Bit 861" "Low,High" textline " " bitfld.long 0x00 28. " IRQS860 ,IRQS Status Bit 860" "Low,High" bitfld.long 0x00 27. " IRQS859 ,IRQS Status Bit 859" "Low,High" bitfld.long 0x00 26. " IRQS858 ,IRQS Status Bit 858" "Low,High" textline " " bitfld.long 0x00 25. " IRQS857 ,IRQS Status Bit 857" "Low,High" bitfld.long 0x00 24. " IRQS856 ,IRQS Status Bit 856" "Low,High" bitfld.long 0x00 23. " IRQS855 ,IRQS Status Bit 855" "Low,High" textline " " bitfld.long 0x00 22. " IRQS854 ,IRQS Status Bit 854" "Low,High" bitfld.long 0x00 21. " IRQS853 ,IRQS Status Bit 853" "Low,High" bitfld.long 0x00 20. " IRQS852 ,IRQS Status Bit 852" "Low,High" textline " " bitfld.long 0x00 19. " IRQS851 ,IRQS Status Bit 851" "Low,High" bitfld.long 0x00 18. " IRQS850 ,IRQS Status Bit 850" "Low,High" bitfld.long 0x00 17. " IRQS849 ,IRQS Status Bit 849" "Low,High" textline " " bitfld.long 0x00 16. " IRQS848 ,IRQS Status Bit 848" "Low,High" bitfld.long 0x00 15. " IRQS847 ,IRQS Status Bit 847" "Low,High" bitfld.long 0x00 14. " IRQS846 ,IRQS Status Bit 846" "Low,High" textline " " bitfld.long 0x00 13. " IRQS845 ,IRQS Status Bit 845" "Low,High" bitfld.long 0x00 12. " IRQS844 ,IRQS Status Bit 844" "Low,High" bitfld.long 0x00 11. " IRQS843 ,IRQS Status Bit 843" "Low,High" textline " " bitfld.long 0x00 10. " IRQS842 ,IRQS Status Bit 842" "Low,High" bitfld.long 0x00 9. " IRQS841 ,IRQS Status Bit 841" "Low,High" bitfld.long 0x00 8. " IRQS840 ,IRQS Status Bit 840" "Low,High" textline " " bitfld.long 0x00 7. " IRQS839 ,IRQS Status Bit 839" "Low,High" bitfld.long 0x00 6. " IRQS838 ,IRQS Status Bit 838" "Low,High" bitfld.long 0x00 5. " IRQS837 ,IRQS Status Bit 837" "Low,High" textline " " bitfld.long 0x00 4. " IRQS836 ,IRQS Status Bit 836" "Low,High" bitfld.long 0x00 3. " IRQS835 ,IRQS Status Bit 835" "Low,High" bitfld.long 0x00 2. " IRQS834 ,IRQS Status Bit 834" "Low,High" textline " " bitfld.long 0x00 1. " IRQS833 ,IRQS Status Bit 833" "Low,High" bitfld.long 0x00 0. " IRQS832 ,IRQS Status Bit 832" "Low,High" else rgroup.long 0x0D6C++0x03 line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1C) rgroup.long 0x0D70++0x03 line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" bitfld.long 0x00 31. " IRQS895 ,IRQS Status Bit 895" "Low,High" bitfld.long 0x00 30. " IRQS894 ,IRQS Status Bit 894" "Low,High" bitfld.long 0x00 29. " IRQS893 ,IRQS Status Bit 893" "Low,High" textline " " bitfld.long 0x00 28. " IRQS892 ,IRQS Status Bit 892" "Low,High" bitfld.long 0x00 27. " IRQS891 ,IRQS Status Bit 891" "Low,High" bitfld.long 0x00 26. " IRQS890 ,IRQS Status Bit 890" "Low,High" textline " " bitfld.long 0x00 25. " IRQS889 ,IRQS Status Bit 889" "Low,High" bitfld.long 0x00 24. " IRQS888 ,IRQS Status Bit 888" "Low,High" bitfld.long 0x00 23. " IRQS887 ,IRQS Status Bit 887" "Low,High" textline " " bitfld.long 0x00 22. " IRQS886 ,IRQS Status Bit 886" "Low,High" bitfld.long 0x00 21. " IRQS885 ,IRQS Status Bit 885" "Low,High" bitfld.long 0x00 20. " IRQS884 ,IRQS Status Bit 884" "Low,High" textline " " bitfld.long 0x00 19. " IRQS883 ,IRQS Status Bit 883" "Low,High" bitfld.long 0x00 18. " IRQS882 ,IRQS Status Bit 882" "Low,High" bitfld.long 0x00 17. " IRQS881 ,IRQS Status Bit 881" "Low,High" textline " " bitfld.long 0x00 16. " IRQS880 ,IRQS Status Bit 880" "Low,High" bitfld.long 0x00 15. " IRQS879 ,IRQS Status Bit 879" "Low,High" bitfld.long 0x00 14. " IRQS878 ,IRQS Status Bit 878" "Low,High" textline " " bitfld.long 0x00 13. " IRQS877 ,IRQS Status Bit 877" "Low,High" bitfld.long 0x00 12. " IRQS876 ,IRQS Status Bit 876" "Low,High" bitfld.long 0x00 11. " IRQS875 ,IRQS Status Bit 875" "Low,High" textline " " bitfld.long 0x00 10. " IRQS874 ,IRQS Status Bit 874" "Low,High" bitfld.long 0x00 9. " IRQS873 ,IRQS Status Bit 873" "Low,High" bitfld.long 0x00 8. " IRQS872 ,IRQS Status Bit 872" "Low,High" textline " " bitfld.long 0x00 7. " IRQS871 ,IRQS Status Bit 871" "Low,High" bitfld.long 0x00 6. " IRQS870 ,IRQS Status Bit 870" "Low,High" bitfld.long 0x00 5. " IRQS869 ,IRQS Status Bit 869" "Low,High" textline " " bitfld.long 0x00 4. " IRQS868 ,IRQS Status Bit 868" "Low,High" bitfld.long 0x00 3. " IRQS867 ,IRQS Status Bit 867" "Low,High" bitfld.long 0x00 2. " IRQS866 ,IRQS Status Bit 866" "Low,High" textline " " bitfld.long 0x00 1. " IRQS865 ,IRQS Status Bit 865" "Low,High" bitfld.long 0x00 0. " IRQS864 ,IRQS Status Bit 864" "Low,High" else rgroup.long 0x0D70++0x03 line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1D) rgroup.long 0x0D74++0x03 line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" bitfld.long 0x00 31. " IRQS927 ,IRQS Status Bit 927" "Low,High" bitfld.long 0x00 30. " IRQS926 ,IRQS Status Bit 926" "Low,High" bitfld.long 0x00 29. " IRQS925 ,IRQS Status Bit 925" "Low,High" textline " " bitfld.long 0x00 28. " IRQS924 ,IRQS Status Bit 924" "Low,High" bitfld.long 0x00 27. " IRQS923 ,IRQS Status Bit 923" "Low,High" bitfld.long 0x00 26. " IRQS922 ,IRQS Status Bit 922" "Low,High" textline " " bitfld.long 0x00 25. " IRQS921 ,IRQS Status Bit 921" "Low,High" bitfld.long 0x00 24. " IRQS920 ,IRQS Status Bit 920" "Low,High" bitfld.long 0x00 23. " IRQS919 ,IRQS Status Bit 919" "Low,High" textline " " bitfld.long 0x00 22. " IRQS918 ,IRQS Status Bit 918" "Low,High" bitfld.long 0x00 21. " IRQS917 ,IRQS Status Bit 917" "Low,High" bitfld.long 0x00 20. " IRQS916 ,IRQS Status Bit 916" "Low,High" textline " " bitfld.long 0x00 19. " IRQS915 ,IRQS Status Bit 915" "Low,High" bitfld.long 0x00 18. " IRQS914 ,IRQS Status Bit 914" "Low,High" bitfld.long 0x00 17. " IRQS913 ,IRQS Status Bit 913" "Low,High" textline " " bitfld.long 0x00 16. " IRQS912 ,IRQS Status Bit 912" "Low,High" bitfld.long 0x00 15. " IRQS911 ,IRQS Status Bit 911" "Low,High" bitfld.long 0x00 14. " IRQS910 ,IRQS Status Bit 910" "Low,High" textline " " bitfld.long 0x00 13. " IRQS909 ,IRQS Status Bit 909" "Low,High" bitfld.long 0x00 12. " IRQS908 ,IRQS Status Bit 908" "Low,High" bitfld.long 0x00 11. " IRQS907 ,IRQS Status Bit 907" "Low,High" textline " " bitfld.long 0x00 10. " IRQS906 ,IRQS Status Bit 906" "Low,High" bitfld.long 0x00 9. " IRQS905 ,IRQS Status Bit 905" "Low,High" bitfld.long 0x00 8. " IRQS904 ,IRQS Status Bit 904" "Low,High" textline " " bitfld.long 0x00 7. " IRQS903 ,IRQS Status Bit 903" "Low,High" bitfld.long 0x00 6. " IRQS902 ,IRQS Status Bit 902" "Low,High" bitfld.long 0x00 5. " IRQS901 ,IRQS Status Bit 901" "Low,High" textline " " bitfld.long 0x00 4. " IRQS900 ,IRQS Status Bit 900" "Low,High" bitfld.long 0x00 3. " IRQS899 ,IRQS Status Bit 899" "Low,High" bitfld.long 0x00 2. " IRQS898 ,IRQS Status Bit 898" "Low,High" textline " " bitfld.long 0x00 1. " IRQS897 ,IRQS Status Bit 897" "Low,High" bitfld.long 0x00 0. " IRQS896 ,IRQS Status Bit 896" "Low,High" else rgroup.long 0x0D74++0x03 line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1E) rgroup.long 0x0D78++0x03 line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" bitfld.long 0x00 31. " IRQS959 ,IRQS Status Bit 959" "Low,High" bitfld.long 0x00 30. " IRQS958 ,IRQS Status Bit 958" "Low,High" bitfld.long 0x00 29. " IRQS957 ,IRQS Status Bit 957" "Low,High" textline " " bitfld.long 0x00 28. " IRQS956 ,IRQS Status Bit 956" "Low,High" bitfld.long 0x00 27. " IRQS955 ,IRQS Status Bit 955" "Low,High" bitfld.long 0x00 26. " IRQS954 ,IRQS Status Bit 954" "Low,High" textline " " bitfld.long 0x00 25. " IRQS953 ,IRQS Status Bit 953" "Low,High" bitfld.long 0x00 24. " IRQS952 ,IRQS Status Bit 952" "Low,High" bitfld.long 0x00 23. " IRQS951 ,IRQS Status Bit 951" "Low,High" textline " " bitfld.long 0x00 22. " IRQS950 ,IRQS Status Bit 950" "Low,High" bitfld.long 0x00 21. " IRQS949 ,IRQS Status Bit 949" "Low,High" bitfld.long 0x00 20. " IRQS948 ,IRQS Status Bit 948" "Low,High" textline " " bitfld.long 0x00 19. " IRQS947 ,IRQS Status Bit 947" "Low,High" bitfld.long 0x00 18. " IRQS946 ,IRQS Status Bit 946" "Low,High" bitfld.long 0x00 17. " IRQS945 ,IRQS Status Bit 945" "Low,High" textline " " bitfld.long 0x00 16. " IRQS944 ,IRQS Status Bit 944" "Low,High" bitfld.long 0x00 15. " IRQS943 ,IRQS Status Bit 943" "Low,High" bitfld.long 0x00 14. " IRQS942 ,IRQS Status Bit 942" "Low,High" textline " " bitfld.long 0x00 13. " IRQS941 ,IRQS Status Bit 941" "Low,High" bitfld.long 0x00 12. " IRQS940 ,IRQS Status Bit 940" "Low,High" bitfld.long 0x00 11. " IRQS939 ,IRQS Status Bit 939" "Low,High" textline " " bitfld.long 0x00 10. " IRQS938 ,IRQS Status Bit 938" "Low,High" bitfld.long 0x00 9. " IRQS937 ,IRQS Status Bit 937" "Low,High" bitfld.long 0x00 8. " IRQS936 ,IRQS Status Bit 936" "Low,High" textline " " bitfld.long 0x00 7. " IRQS935 ,IRQS Status Bit 935" "Low,High" bitfld.long 0x00 6. " IRQS934 ,IRQS Status Bit 934" "Low,High" bitfld.long 0x00 5. " IRQS933 ,IRQS Status Bit 933" "Low,High" textline " " bitfld.long 0x00 4. " IRQS932 ,IRQS Status Bit 932" "Low,High" bitfld.long 0x00 3. " IRQS931 ,IRQS Status Bit 931" "Low,High" bitfld.long 0x00 2. " IRQS930 ,IRQS Status Bit 930" "Low,High" textline " " bitfld.long 0x00 1. " IRQS929 ,IRQS Status Bit 929" "Low,High" bitfld.long 0x00 0. " IRQS928 ,IRQS Status Bit 928" "Low,High" else rgroup.long 0x0D78++0x03 line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x0000001F)>=0x1F) rgroup.long 0x0D7C++0x03 line.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30" bitfld.long 0x00 27. " IRQS987 ,IRQS Status Bit 987" "Low,High" bitfld.long 0x00 26. " IRQS986 ,IRQS Status Bit 986" "Low,High" textline " " bitfld.long 0x00 25. " IRQS985 ,IRQS Status Bit 985" "Low,High" bitfld.long 0x00 24. " IRQS984 ,IRQS Status Bit 984" "Low,High" bitfld.long 0x00 23. " IRQS983 ,IRQS Status Bit 983" "Low,High" textline " " bitfld.long 0x00 22. " IRQS982 ,IRQS Status Bit 982" "Low,High" bitfld.long 0x00 21. " IRQS981 ,IRQS Status Bit 981" "Low,High" bitfld.long 0x00 20. " IRQS980 ,IRQS Status Bit 980" "Low,High" textline " " bitfld.long 0x00 19. " IRQS979 ,IRQS Status Bit 979" "Low,High" bitfld.long 0x00 18. " IRQS978 ,IRQS Status Bit 978" "Low,High" bitfld.long 0x00 17. " IRQS977 ,IRQS Status Bit 977" "Low,High" textline " " bitfld.long 0x00 16. " IRQS976 ,IRQS Status Bit 976" "Low,High" bitfld.long 0x00 15. " IRQS975 ,IRQS Status Bit 975" "Low,High" bitfld.long 0x00 14. " IRQS974 ,IRQS Status Bit 974" "Low,High" textline " " bitfld.long 0x00 13. " IRQS973 ,IRQS Status Bit 973" "Low,High" bitfld.long 0x00 12. " IRQS972 ,IRQS Status Bit 972" "Low,High" bitfld.long 0x00 11. " IRQS971 ,IRQS Status Bit 971" "Low,High" textline " " bitfld.long 0x00 10. " IRQS970 ,IRQS Status Bit 970" "Low,High" bitfld.long 0x00 9. " IRQS969 ,IRQS Status Bit 969" "Low,High" bitfld.long 0x00 8. " IRQS968 ,IRQS Status Bit 968" "Low,High" textline " " bitfld.long 0x00 7. " IRQS967 ,IRQS Status Bit 967" "Low,High" bitfld.long 0x00 6. " IRQS966 ,IRQS Status Bit 966" "Low,High" bitfld.long 0x00 5. " IRQS965 ,IRQS Status Bit 965" "Low,High" textline " " bitfld.long 0x00 4. " IRQS964 ,IRQS Status Bit 964" "Low,High" bitfld.long 0x00 3. " IRQS963 ,IRQS Status Bit 963" "Low,High" bitfld.long 0x00 2. " IRQS962 ,IRQS Status Bit 962" "Low,High" textline " " bitfld.long 0x00 1. " IRQS961 ,IRQS Status Bit 961" "Low,High" bitfld.long 0x00 0. " IRQS960 ,IRQS Status Bit 960" "Low,High" else rgroup.long 0x0D7C++0x03 line.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 25. tree "Software Generated Interrupt" if (((per.l(ad:(per.long(spr:0x31F30)&0xFFFC0000)+0x04))&0x400)==0x400) wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" bitfld.long 0x00 24.--25. " TLF ,Target List Filter" "TargetList,All CPUs,Request CPU,?..." hexmask.long.byte 0x00 16.--23. 1. " CPUTL ,CPU Target List" textline " " bitfld.long 0x00 15. " NSATT ,NSATT" "Secure,Non-secure" bitfld.long 0x00 0.--3. " SGINTID ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" bitfld.long 0x00 24.--25. " TLF ,Target List Filter" "TargetList,All CPUs,Request CPU,?..." hexmask.long.byte 0x00 16.--23. 1. " CPUTL ,CPU Target List" textline " " bitfld.long 0x00 0.--3. " SGINTID ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif group.long 0x0F20++0x03 line.long 0x00 "GICD_SET/CLR_PENDSGIR0,SGI Set/Clear Pending Register 0" setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. -0x10 30. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. -0x10 29. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. -0x10 27. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. -0x10 26. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. -0x10 24. " SET/CLR_SGI0 ,SGI0 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. -0x10 23. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. -0x10 21. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. -0x10 20. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. -0x10 18. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. -0x10 17. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI1 ,SGI1 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. -0x10 15. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. -0x10 14. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. -0x10 12. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. -0x10 11. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. -0x10 9. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. -0x10 8. " SET/CLR_SGI2 ,SGI2 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. -0x10 6. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. -0x10 5. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. -0x10 3. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. -0x10 2. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. -0x10 0. " SET/CLR_SGI3 ,SGI3 Set/Clear Pending Bit" "Disabled,Enabled" group.long 0x0F24++0x03 line.long 0x00 "GICD_SET/CLR_PENDSGIR1,SGI Set/Clear Pending Register 1" setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. -0x10 30. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. -0x10 29. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. -0x10 27. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. -0x10 26. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. -0x10 24. " SET/CLR_SGI4 ,SGI4 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. -0x10 23. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. -0x10 21. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. -0x10 20. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. -0x10 18. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. -0x10 17. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI5 ,SGI5 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. -0x10 15. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. -0x10 14. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. -0x10 12. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. -0x10 11. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. -0x10 9. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. -0x10 8. " SET/CLR_SGI6 ,SGI6 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. -0x10 6. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. -0x10 5. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. -0x10 3. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. -0x10 2. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. -0x10 0. " SET/CLR_SGI7 ,SGI7 Set/Clear Pending Bit" "Disabled,Enabled" group.long 0x0F28++0x03 line.long 0x00 "GICD_SET/CLR_PENDSGIR2,SGI Set/Clear Pending Register 2" setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. -0x10 30. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. -0x10 29. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. -0x10 27. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. -0x10 26. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. -0x10 24. " SET/CLR_SGI8 ,SGI8 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. -0x10 23. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. -0x10 21. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. -0x10 20. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. -0x10 18. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. -0x10 17. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI9 ,SGI9 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. -0x10 15. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. -0x10 14. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. -0x10 12. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. -0x10 11. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. -0x10 9. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. -0x10 8. " SET/CLR_SGI10 ,SGI10 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. -0x10 6. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. -0x10 5. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. -0x10 3. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. -0x10 2. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. -0x10 0. " SET/CLR_SGI11 ,SGI11 Set/Clear Pending Bit" "Disabled,Enabled" group.long 0x0F2C++0x03 line.long 0x00 "GICD_SET/CLR_PENDSGIR2,SGI Set/Clear Pending Register 3" setclrfld.long 0x00 31. 0x00 31. -0x10 31. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. -0x10 30. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. -0x10 29. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. -0x10 28. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. -0x10 27. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. -0x10 26. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. -0x10 25. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. -0x10 24. " SET/CLR_SGI12 ,SGI12 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. -0x10 23. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. -0x10 22. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. -0x10 21. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. -0x10 20. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. -0x10 19. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. -0x10 18. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. -0x10 17. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. -0x10 16. " SET/CLR_SGI13 ,SGI13 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. -0x10 15. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. -0x10 14. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. -0x10 13. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. -0x10 12. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. -0x10 11. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. -0x10 10. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. -0x10 9. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. -0x10 8. " SET/CLR_SGI14 ,SGI14 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. -0x10 7. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. -0x10 6. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. -0x10 5. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. -0x10 4. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. -0x10 3. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. -0x10 2. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. -0x10 1. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. -0x10 0. " SET/CLR_SGI15 ,SGI15 Set/Clear Pending Bit" "Disabled,Enabled" tree.end width 12. tree "Peripheral/Component ID Registers" rgroup.byte 0x0FE0++0x00 line.byte 0x00 "GICD_PIDR0,Peripheral ID0 Register" hexmask.byte 0x00 0.--7. 1. " DEVID ,DevID field" rgroup.byte 0x0FE4++0x00 line.byte 0x00 "GICD_PIDR1,Peripheral ID1 Register" bitfld.byte 0x00 4.--7. " ARCHID ,ArchID field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " DEVID ,DevID field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FE8++0x00 line.byte 0x00 "GICD_PIDR2,Peripheral ID2 Register" bitfld.byte 0x00 4.--7. " ARCHREV ,ArchRev field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 3. " UJEPCODE ,UsesJEPcode field" "Low,High" bitfld.byte 0x00 0.--2. " ARCHID ,ArchID field" "0,1,2,3,4,5,6,7" rgroup.byte 0x0FEC++0x00 line.byte 0x00 "GICD_PIDR3,Peripheral ID3 Register" bitfld.byte 0x00 4.--7. " REVID ,Revision field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FD0++0x00 line.byte 0x00 "GICD_PIDR4,Peripheral ID4 Register" bitfld.byte 0x00 0.--3. " CC ,ContinuationCode field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0xFD4++0x00 line.byte 0x00 "GICD_PIDR5,Peripheral ID5 Register" rgroup.byte 0xFD8++0x00 line.byte 0x00 "GICD_PIDR6,Peripheral ID6 Register" rgroup.byte 0xFDC++0x00 line.byte 0x00 "GICD_PIDR7,Peripheral ID7 Register" textline " " rgroup.byte 0xFF0++0x00 line.byte 0x00 "GICD_CIDR0,Component ID0 Register" hexmask.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.byte 0xFF4++0x00 line.byte 0x00 "GICD_CIDR1,Component ID1 Register" hexmask.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.byte 0xFF8++0x00 line.byte 0x00 "GICD_CIDR2,Component ID2 Register" hexmask.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.byte 0xFFC++0x00 line.byte 0x00 "GICD_CIDR3,Component ID3 Register" hexmask.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" textline " " tree.end tree.end width 0x0B tree.end tree.end elif (CORENAME()=="CORTEXM33F") tree.close "Core Registers (Cortex-M33F)" AUTOINDENT.PUSH AUTOINDENT.OFF tree "System Control" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 12. group.long 0x08++0x03 line.long 0x00 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 29. " EXTEXCLALL ,Allows external exclusive operations to be used in a configuration with no MPU" "No,Yes" bitfld.long 0x00 12. " DISITMATBFLUSH ,Disables ITM and DWT ATB flush" "No,Yes" bitfld.long 0x00 10. " FPEXCODIS ,Disables FPU exception outputs" "No,Yes" textline " " bitfld.long 0x00 9. " DISOOFP ,Disables floating-point" "No,Yes" bitfld.long 0x00 2. " DISFOLD ,Disables dual-issue functionality" "No,Yes" bitfld.long 0x00 0. " DISMCYCINT ,Disables interruption of multi-cycle" "No,Yes" group.long 0x0C++0x0F line.long 0x00 "CPPWR,Coprocessor Power Control Register" bitfld.long 0x00 21. " SUS10 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 20. " SU10 ,This bit indicates and allows modification of whether the state associated with the floating point unit is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 15. " SUS7 ,State unknown Secure only" "Both states,Secure only" textline " " bitfld.long 0x00 14. " SU7 ,This bit indicates and allows modification of whether the state associated with the coprocessor 7 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 13. " SUS6 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 12. " SU6 ,This bit indicates and allows modification of whether the state associated with the coprocessor 6 is permitted to become UNKNOWN" "Not permitted,Permitted" textline " " bitfld.long 0x00 11. " SUS5 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 10. " SU5 ,This bit indicates and allows modification of whether the state associated with the coprocessor 5 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 9. " SUS4 ,State unknown Secure only" "Both states,Secure only" textline " " bitfld.long 0x00 8. " SU4 ,This bit indicates and allows modification of whether the state associated with the coprocessor 4 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 7. " SUS3 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 6. " SU3 ,This bit indicates and allows modification of whether the state associated with the coprocessor 3 is permitted to become UNKNOWN" "Not permitted,Permitted" textline " " bitfld.long 0x00 5. " SUS2 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 4. " SU2 ,This bit indicates and allows modification of whether the state associated with the coprocessor 2 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 3. " SUS1 ,State unknown Secure only" "Both states,Secure only" textline " " bitfld.long 0x00 2. " SU1 ,This bit indicates and allows modification of whether the state associated with the coprocessor 1 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 1. " SUS0 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 0. " SU0 ,This bit indicates and allows modification of whether the state associated with the coprocessor 0 is permitted to become UNKNOWN" "Not permitted,Permitted" line.long 0x04 "SYST_CSR,SysTick Control and Status Register" rbitfld.long 0x04 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted" bitfld.long 0x04 2. " CLKSOURCE ,SysTick clock source" "External,Core" bitfld.long 0x04 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick" textline " " bitfld.long 0x04 0. " ENABLE ,Counter Enable" "Disabled,Enabled" line.long 0x08 "SYST_RVR,SysTick Reload Value Register" hexmask.long.tbyte 0x08 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0" line.long 0x0C "SYST_CVR,SysTick Current Value Register" hexmask.long.tbyte 0x0C 0.--23. 1. " CURRENT ,Current counter value" rgroup.long 0x1C++0x03 line.long 0x00 "SYST_CALIB,SysTick Calibration value Register" bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented" bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact" hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing" rgroup.long 0xD00++0x03 line.long 0x00 "CPUID,CPUID Base Register" abitfld.long 0x00 24.--31. " IMPLEMENTER ,Implementer code that Arm has assigned" "0x41=Arm Limited" bitfld.long 0x00 20.--23. " VARIANT ,Variant number to distinguish between different product variants or major revisions of the product" "r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r13,r14,r15" bitfld.long 0x00 16.--19. " ARCHITECTURE ,Indicates the architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8-M w/ Main Extension" newline abitfld.long 0x00 4.--15. " PARTNO ,Indicates part number" "0xD21=Cortex-M33" bitfld.long 0x00 0.--3. " REVISION ,Revision number to distinguish between different patches of the product" "p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15" group.long 0xD04++0x23 line.long 0x00 "ICSR,Interrupt Control and State Register" setclrfld.long 0x00 31. 0x00 31. 0x00 30. " PENDNMISET , On writes allows the NMI exception to be set as pending. On reads indicates whether the NMI exception is pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x00 27. " PENDSVSET , On writes allows the PendSV exception for the selected Security state to be set as pending. On reads indicates whether the PendSV for the selected Security state exception is pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x00 25. " PENDSTSET ,On writes, sets the SysTick exception as pending. On reads, indicates the current state of the exception" "Not pending,Pending" textline " " bitfld.long 0x00 24. " STTNS ,Controls whether in a single SysTick implementation the SysTick is Secure or Non-secure" "Secure,Non-secure" rbitfld.long 0x00 23. " ISRPREEMPT ,Indicates whether a pending exception will be serviced on exit from debug halt state" "Disabled,Enabled" rbitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt, generated by the NVIC, is pending" "Not pending,Pending" textline " " hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,The exception number of the highest priority pending and enabled interrupt" rbitfld.long 0x00 11. " RETTOBASE ,Indicates whether there is an active exception other than the exception indicated by the current value of the IPSR" "Present,Absent" hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception" line.long 0x04 "VTOR,Vector Table Offset Register" hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Bits[31:7] of the vector table address" line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register" hexmask.long.word 0x08 16.--31. 1. " VECTKEYSTAT ,Vector Key" rbitfld.long 0x08 15. " ENDIANNESS ,Indicates the memory system endianness" "Little endian,Big endian" bitfld.long 0x08 14. " PRIS ,Prioritize Secure exceptions" "Disabled,Enabled" textline " " bitfld.long 0x08 13. " BFHFNMINS ,BusFault BusFault HardFault and NMI Non-secure enable" "Disabled,Enabled" bitfld.long 0x08 8.--10. " PRIGROUP ,Priority grouping. Group priority field bits/Subpriority field bits" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" bitfld.long 0x08 3. " SYSRESETREQS ,System reset request Secure only" "Both states,Secure only" textline " " bitfld.long 0x08 2. " SYSRESETREQ ,System reset request" "Not requested,Requested" bitfld.long 0x08 1. " VECTCLRACTIVE ,Writing 1 to this bit clears all active state information for fixed and configurable exceptions" "No effect,Clear" line.long 0x0C "SCR,System Control Register" bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup" bitfld.long 0x0C 3. " SLEEPDEEPS ,Controls whether the SLEEPDEEP bit is only accessible from the secure state" "Both states,Secure only" bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep" textline " " bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled" line.long 0x10 "CCR,Configuration and Control Register" bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled" bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled" bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled" textline " " bitfld.long 0x10 10. " STKOFHFNMIGN ,Controls the effect of a stack limit violation while executing at a requested priority less than 0" "Not ignored,Ignored" bitfld.long 0x10 8. " BFHFNMIGN ,Determines the effect of precise busfaults on handlers running at a requested priority less than 0" "Not ignored,Ignored" bitfld.long 0x10 4. " DIV_0_TRP ,Controls the trap on divide by 0" "Disabled,Enabled" textline " " bitfld.long 0x10 3. " UNALIGN_TRP ,Controls the trapping of unaligned word or halfword accesses" "Disabled,Enabled" bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Disabled,Enabled" line.long 0x14 "SHPR1,System Handler Priority Register 1" hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of system handler 7, SecureFault" hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6, UsageFault" hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5, BusFault" textline " " hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4, MemManage" line.long 0x18 "SHPR2,System Handler Priority Register 2" hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11, SVCall" line.long 0x1C "SHPR3,System Handler Priority Register 3" hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of system handler 15, SysTick" hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of system handler 14, PendSV" hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of system handler 12, DebugMonitor" line.long 0x20 "SHCSR,System Handler Control and State Register" bitfld.long 0x20 21. " HARDFAULTPENDED ,HardFault exception status" "Not pending,Pending" bitfld.long 0x20 20. " SECUREFAULTPENDED ,SecureFault exception status" "Not pending,Pending" bitfld.long 0x20 19. " SECUREFAULTENA ,SecureFault exception enable" "Disabled,Enabled" textline " " bitfld.long 0x20 18. " USGFAULTENA ,UsageFault exception enable" "Disabled,Enabled" bitfld.long 0x20 17. " BUSFAULTENA ,BusFault exception enable" "Disabled,Enabled" bitfld.long 0x20 16. " MEMFAULTENA ,MemManage exception enable" "Disabled,Enabled" textline " " bitfld.long 0x20 15. " SVCALLPENDED ,SVCall exception status" "Not pending,Pending" bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault exception status" "Not pending,Pending" bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage exception status" "Not pending,Pending" textline " " bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault exception status" "Not pending,Pending" bitfld.long 0x20 11. " SYSTICKACT ,SysTick exception status" "Not active,Active" bitfld.long 0x20 10. " PENDSVACT ,PendSV exception status" "Not active,Active" textline " " bitfld.long 0x20 8. " MONITORACT ,Monitor exception status" "Not active,Active" bitfld.long 0x20 7. " SVCALLACT ,SVCall exception status" "Not active,Active" bitfld.long 0x20 5. " NMIACT ,NMI exception status" "Not active,Active" textline " " bitfld.long 0x20 4. " SECUREFAULTACT ,SecureFault exception status" "Not active,Active" bitfld.long 0x20 3. " USGFAULTACT ,UsageFault exception status" "Not active,Active" bitfld.long 0x20 2. " HARDFAULTACT ,HardFault exception status for the selected Security state" "Not active,Active" textline " " bitfld.long 0x20 1. " BUSFAULTACT ,BusFault exception status" "Not active,Active" bitfld.long 0x20 0. " MEMFAULTACT ,MemManage exception status" "Not active,Active" group.byte 0xD28++0x1 line.byte 0x00 "MMFSR,MemManage Status Register" bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x00 4. " MSTKERR ,Stacking Access Violations" "Not occurred,Occurred" textline " " bitfld.byte 0x00 3. " MUNSTKERR ,Unstacking Access Violations" "Not occurred,Occurred" bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred" bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred" line.byte 0x01 "BFSR,Bus Fault Status Register" bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x01 4. " STKERR ,Derived bus fault (exception entry)" "Not occurred,Occurred" textline " " bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault (exception return)" "Not occurred,Occurred" bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred" bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred" textline " " bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred" group.word 0xD2A++0x1 line.word 0x00 "UFSR,Usage Fault Status Register" eventfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error" eventfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error" eventfld.word 0x00 4. " STKOF ,Stack overflow error" "No error,Error" textline " " eventfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error" eventfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error" eventfld.word 0x00 1. " INVSTATE , Invalid Combination of EPSR and Instruction" "No error,Error" textline " " eventfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error" group.long 0xD2C++0x03 line.long 0x00 "HFSR,HardFault Status Register" bitfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred" bitfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority has been escalated to a HardFault exception" "Not occurred,Occurred" bitfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred" group.long 0xD34++0x0B line.long 0x00 "MMFAR,MemManage Fault Address Register" line.long 0x04 "BFAR,BusFault Address Register" line.long 0x08 "AFSR,Auxiliary Fault Status Register" group.long 0xD88++0x03 line.long 0x00 "CPACR,Coprocessor Access Control Register" bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Denied,Privileged,,Full" bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Denied,Privileged,,Full" bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Denied,Privileged,,Full" bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Denied,Privileged,,Full" bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Denied,Privileged,,Full" bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Denied,Privileged,,Full" if PER.ADDRESS.isSECUREEX(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD48) group.long 0xD8C++0x03 line.long 0x00 "NSACR,Non-Secure Access Control Register" bitfld.long 0x00 11. " CP11 ,Enables Non-secure access to coprocessor CP11" "Disabled,Enabled" bitfld.long 0x00 10. " CP10 ,Enables Non-secure access to coprocessor CP10" "Disabled,Enabled" bitfld.long 0x00 7. " CP7 ,Enables Non-secure access to coprocessor CP7" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " CP6 ,Enables Non-secure access to coprocessor CP6" "Disabled,Enabled" bitfld.long 0x00 5. " CP5 ,Enables Non-secure access to coprocessor CP5" "Disabled,Enabled" bitfld.long 0x00 4. " CP4 ,Enables Non-secure access to coprocessor CP4" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " CP3 ,Enables Non-secure access to coprocessor CP3" "Disabled,Enabled" bitfld.long 0x00 2. " CP2 ,Enables Non-secure access to coprocessor CP2" "Disabled,Enabled" bitfld.long 0x00 1. " CP1 ,Enables Non-secure access to coprocessor CP1" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " CP0 ,Enables Non-secure access to coprocessor CP0" "Disabled,Enabled" else hgroup.long 0xD8C++0x03 hide.long 0x00 "NSACR,Non-Secure Access Control Register (not accessible)" endif wgroup.long 0xF00++0x03 line.long 0x00 "STIR,Software Triggered Interrupt Register" hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be pended" tree "Memory System" width 10. rgroup.long 0xD78++0x03 line.long 0x00 "CLIDR,Cache Level ID Register" bitfld.long 0x00 30.--31. " ICB ,Inner cache boundary" "Not disclosed,L1 cache highest,L2 cache highest,L3 cache highest" bitfld.long 0x00 27.--29. " LOU ,LOUU" "Level 1,Level 2,?..." bitfld.long 0x00 24.--26. " LOC ,Level of Coherency" "Level 1,Level 2,?..." textline " " bitfld.long 0x00 18.--20. " CL7 ,Cache type field level 7" "No cache,Instr. only,Data only,Data and Instr.,Unified cache,?..." bitfld.long 0x00 15.--17. " CL6 ,Cache type field level 6" "No cache,?..." bitfld.long 0x00 12.--14. " CL5 ,Cache type field level 5" "No cache,?..." textline " " bitfld.long 0x00 9.--11. " CL4 ,Cache type field level 4" "No cache,?..." bitfld.long 0x00 6.--8. " CL3 ,Cache type field level 3" "No cache,?..." bitfld.long 0x00 3.--5. " CL2 ,Cache type field level 2" "No cache,?..." textline " " bitfld.long 0x00 0.--2. " CL1 ,Cache type field level 1" "No cache,Instr. only,Data only,Data and Instr.,?..." if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD7C)&0xE0000000)==0x80000000) rgroup.long 0xD7C++0x03 line.long 0x00 "CTR,Cache Type Register" bitfld.long 0x00 29.--31. " FORMAT ,Indicates the implemented CTR format" "No Cache,,,,Cache,?..." bitfld.long 0x00 24.--27. " CWG ,Cache Write-back Granule" "0,1,2,3,4,5,6,7,8,9,?..." bitfld.long 0x00 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,?..." textline " " bitfld.long 0x00 16.--19. " DMINLINE ,Log 2 of the number of words in the smallest cache line of all the data caches and unified caches that are controlled by the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " IMINLINE ,Log 2 of the number of words in the smallest cache line of all the instruction caches that are controlled by the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else rgroup.long 0xD7C++0x03 line.long 0x00 "CTR,Cache Type Register" bitfld.long 0x00 29.--31. " FORMAT ,Indicates the implemented CTR format" "No Cache,,,,Cache,?..." endif rgroup.long 0xD80++0x03 line.long 0x00 "CCSIDR,Cache Size ID Register" bitfld.long 0x00 31. " WT ,Indicates support available for Write-Through" "Not supported,Supported" bitfld.long 0x00 30. " WB ,Indicates support available for Write-Back" "Not supported,Supported" bitfld.long 0x00 29. " RA ,Indicates support available for read allocation" "Not supported,Supported" textline " " bitfld.long 0x00 28. " WA ,Indicates support available for write allocation" "Not supported,Supported" hexmask.long.word 0x00 13.--27. 1. " NUMSETS ,Indicates the number of sets as (number of sets) - 1" hexmask.long.word 0x00 3.--12. 1. " ASSOCIATIVITY ,Indicates the number of ways as (number of ways) - 1" textline " " bitfld.long 0x00 0.--2. " LINESIZE ,Indicates the number of words in each cache line" "4,8,16,32,64,128,256,512" group.long 0xD84++0x03 line.long 0x00 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. " LEVEL ,Identifies which cache level to select" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,?..." bitfld.long 0x00 0. " IND ,Identifies instruction or data cache to use" "Data/Unified,Instruction" wgroup.long 0xF50++0x03 line.long 0x00 "ICIALLU,I-Cache Invalidate All to PoU" wgroup.long 0xF58++0x23 line.long 0x00 "ICIMVAU,I-Cache Invalidate by MVA to PoU" line.long 0x04 "DCIMVAC,D-Cache Invalidate by MVA to PoC" line.long 0x08 "DCISW,D-Cache Invalidate by Set-Way" hexmask.long 0x08 4.--31. 1. " SETWAY ,Defines number of the way to operate on and number of the set to operate on" bitfld.long 0x08 1.--3. " LEVEL ,Cache level to operate on, minus" "L1,L2,L3,L4,L5,L6,L7,L8" line.long 0x0C "DCCMVAU,D-Cache Clean by MVA to PoU" line.long 0x10 "DCCMVAC,D-Cache Clean by MVA to PoC" line.long 0x14 "DCCSW,D-Cache Clean by Set-Way" hexmask.long 0x14 4.--31. 1. " SETWAY ,Defines number of the way to operate on and number of the set to operate on" bitfld.long 0x14 1.--3. " LEVEL ,Cache level to operate on, minus" "L1,L2,L3,L4,L5,L6,L7,L8" line.long 0x18 "DCCIMVAC,D-Cache Clean and Invalidate by MVA to PoC" line.long 0x1C "DCCISW,D-Cache Clean and Invalidate by Set-Way" hexmask.long 0x1C 4.--31. 1. " SETWAY ,Defines number of the way to operate on and number of the set to operate on" bitfld.long 0x1C 1.--3. " LEVEL ,Cache level to operate on, minus" "L1,L2,L3,L4,L5,L6,L7,L8" line.long 0x20 "BPIALL,Branch Predictor Invalidate All" tree.end tree "Feature Registers" width 10. rgroup.long 0xD40++0x0B line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 4.--7. " STATE1 ,T32 instruction set support" ",,,Supported,?..." bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..." line.long 0x04 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..." bitfld.long 0x04 4.--7. " SECURITY ,Security support" "Not implemented,Implemented,?..." line.long 0x08 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x08 20.--23. " MPROFDBG ,M-profile debug. Indicates the supported M-profile debug architecture" "Not supported,ARMv8-M Debug architecture,?..." rgroup.long 0xD4C++0x03 line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" rgroup.long 0xD50++0x03 line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TCM ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "1 level,2 levels,?..." textline " " bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,HW coherency,,,,,,,,,,,,,,Ignored" bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,,PMSAv8,?..." rgroup.long 0xD54++0x03 line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1" rgroup.long 0xD58++0x03 line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..." rgroup.long 0xD5C++0x03 line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3" bitfld.long 0x00 8.--11. " BPMAINT ,Indicates the supported branch predictor maintenance" "Not supported,Supported,?..." bitfld.long 0x00 4.--7. " CMAINTSW ,Indicates the supported cache maintenance operations by set/way" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " CMAINTVA ,Indicates the supported cache maintenance operations by virtual-address" "Not supported,Supported,?..." rgroup.long 0xD60++0x03 line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0" bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..." bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..." bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..." bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..." bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..." rgroup.long 0xD64++0x03 line.long 0x00 "ID_ISAR1,Instruction Set Attributes Register 1" bitfld.long 0x00 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..." bitfld.long 0x00 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..." bitfld.long 0x00 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..." textline " " bitfld.long 0x00 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Basic,Extended,?..." rgroup.long 0xD68++0x03 line.long 0x00 "ID_ISAR2,Instruction Set Attributes Register 2" bitfld.long 0x00 28.--31. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..." bitfld.long 0x00 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..." bitfld.long 0x00 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,SMULL/SMLAL,,SMULL/SMLAL/DSP,?..." textline " " bitfld.long 0x00 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MUL,MUL/MLA/MLS,?..." bitfld.long 0x00 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..." bitfld.long 0x00 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..." textline " " bitfld.long 0x00 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,,Load-acquire/Store-release/Exclusive,?..." rgroup.long 0xD6C++0x03 line.long 0x00 "ID_ISAR3,Instruction Set Attributes Register 3" bitfld.long 0x00 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..." textline " " bitfld.long 0x00 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..." bitfld.long 0x00 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Extended,?..." textline " " bitfld.long 0x00 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB/Q-bit,?..." rgroup.long 0xD70++0x03 line.long 0x00 "ID_ISAR4,Instruction Set Attributes Register 4" bitfld.long 0x00 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,CPS/MRS/MSR,?..." bitfld.long 0x00 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" ",,,Supported,?..." bitfld.long 0x00 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,,,DMB/DSB/ISB,?..." textline " " bitfld.long 0x00 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..." bitfld.long 0x00 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,,,Load/store,?..." bitfld.long 0x00 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,?..." tree.end tree "CoreSight Identification Registers" base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 11. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xFBC))&0x100000)==0x100000) rgroup.long 0xFBC++0x03 line.long 0x00 "DDEVARCH,SCS CoreSight Device Architecture Register" hexmask.long.word 0x00 21.--31. 1. " ARCHITECT ,Component architect" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" bitfld.long 0x00 16.--19. " REVISION ,Architecture revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " ARCHVER ,Architecture version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " ARCHPART ,Architecture part" else rgroup.long 0xFBC++0x03 line.long 0x00 "DDEVARCH,SCS CoreSight Device Architecture Register" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" endif rgroup.long 0xFE0++0x0F line.long 0x00 "DPIDR0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "DPIDR1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "DPIDR2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "DPIDR3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "DCIDR0,Component ID0 (Preamble)" hexmask.long.byte 0x00 0.--7. 1. " PRMBL_0 ,CoreSight component identification preamble" line.long 0x04 "DCIDR1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " PRMBL_1 ,CoreSight component class" line.long 0x08 "DCIDR2,Component ID2" hexmask.long.byte 0x08 0.--7. 1. " PRMBL_2 ,CoreSight component identification preamble" line.long 0x0c "DCIDR3,Component ID3" hexmask.long.byte 0x0C 0.--7. 1. " PRMBL_3 ,CoreSight component identification preamble" tree.end width 0xB else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Memory Protection Unit (MPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 15. rgroup.long 0xD90++0x03 line.long 0x00 "MPU_TYPE,MPU Type Register" bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..." bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,?..." group.long 0xD94++0x03 line.long 0x00 "MPU_CTRL,MPU Control Register" bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled" bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled" bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled" group.long 0xD98++0x03 line.long 0x00 "MPU_RNR,MPU Region Number Register" hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR" tree.close "MPU regions" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0 group.long 0xD9C++0x03 "Region 0" saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RLAR0,MPU Region Attribute and Size Register 0" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 0 (not implemented)" saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RLAR0,MPU Region Attribute and Size Register 0" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1 group.long 0xD9C++0x03 "Region 1" saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RLAR1,MPU Region Attribute and Size Register 1" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 1 (not implemented)" saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RLAR1,MPU Region Attribute and Size Register 1" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2 group.long 0xD9C++0x03 "Region 2" saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RLAR2,MPU Region Attribute and Size Register 2" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 2 (not implemented)" saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RLAR2,MPU Region Attribute and Size Register 2" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3 group.long 0xD9C++0x03 "Region 3" saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RLAR3,MPU Region Attribute and Size Register 3" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 3 (not implemented)" saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RLAR3,MPU Region Attribute and Size Register 3" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4 group.long 0xD9C++0x03 "Region 4" saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RLAR4,MPU Region Attribute and Size Register 4" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 4 (not implemented)" saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RLAR4,MPU Region Attribute and Size Register 4" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5 group.long 0xD9C++0x03 "Region 5" saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RLAR5,MPU Region Attribute and Size Register 5" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 5 (not implemented)" saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RLAR5,MPU Region Attribute and Size Register 5" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6 group.long 0xD9C++0x03 "Region 6" saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RLAR6,MPU Region Attribute and Size Register 6" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 6 (not implemented)" saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RLAR6,MPU Region Attribute and Size Register 6" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7 group.long 0xD9C++0x03 "Region 7" saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RLAR7,MPU Region Attribute and Size Register 7" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 7 (not implemented)" saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RLAR7,MPU Region Attribute and Size Register 7" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8 group.long 0xD9C++0x03 "Region 8" saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RLAR8,MPU Region Attribute and Size Register 8" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 8 (not implemented)" saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RLAR8,MPU Region Attribute and Size Register 8" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9 group.long 0xD9C++0x03 "Region 9" saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RLAR9,MPU Region Attribute and Size Register 9" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 9 (not implemented)" saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RLAR9,MPU Region Attribute and Size Register 9" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA group.long 0xD9C++0x03 "Region 10" saveout 0xD98 %l 0xA line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xA line.long 0x00 "MPU_RLAR10,MPU Region Attribute and Size Register 10" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 10 (not implemented)" saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RLAR10,MPU Region Attribute and Size Register 10" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB group.long 0xD9C++0x03 "Region 11" saveout 0xD98 %l 0xB line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xB line.long 0x00 "MPU_RLAR11,MPU Region Attribute and Size Register 11" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 11 (not implemented)" saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RLAR11,MPU Region Attribute and Size Register 11" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC group.long 0xD9C++0x03 "Region 12" saveout 0xD98 %l 0xC line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xC line.long 0x00 "MPU_RLAR12,MPU Region Attribute and Size Register 12" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 12 (not implemented)" saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RLAR12,MPU Region Attribute and Size Register 12" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD group.long 0xD9C++0x03 "Region 13" saveout 0xD98 %l 0xD line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xD line.long 0x00 "MPU_RLAR13,MPU Region Attribute and Size Register 13" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 13 (not implemented)" saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RLAR13,MPU Region Attribute and Size Register 13" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE group.long 0xD9C++0x03 "Region 14" saveout 0xD98 %l 0xE line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xE line.long 0x00 "MPU_RLAR14,MPU Region Attribute and Size Register 14" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 14 (not implemented)" saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RLAR14,MPU Region Attribute and Size Register 14" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF group.long 0xD9C++0x03 "Region 15" saveout 0xD98 %l 0xF line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xF line.long 0x00 "MPU_RLAR15,MPU Region Attribute and Size Register 15" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 15 (not implemented)" saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RLAR15,MPU Region Attribute and Size Register 15" endif tree.end newline group.long 0xDC0++0x07 line.long 0x00 "MPU_MAIR0,MPU Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. " ATTR3H ,Attribute 3 High. Outer memory attributes for MPU regions with an AttrIndex of 3" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 24.--27. " ATTR3L ,Attribute 3 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 3 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x00 20.--23. " ATTR2H ,Attribute 2 High. Outer memory attributes for MPU regions with an AttrIndex of 2" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 16.--19. " ATTR2L ,Attribute 2 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 2 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x00 12.--15. " ATTR1H ,Attribute 1 High. Outer memory attributes for MPU regions with an AttrIndex of 1" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 8.--11. " ATTR1L ,Attribute 1 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 1 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x00 4.--7. " ATTR0H ,Attribute 0 High. Outer memory attributes for MPU regions with an AttrIndex of 0" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 0.--3. " ATTR0L ,Attribute 0 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 0 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" line.long 0x04 "MPU_MAIR1,MPU Memory Attribute Indirection Register 1" bitfld.long 0x04 28.--31. " ATTR7H ,Attribute 7 High. Outer memory attributes for MPU regions with an AttrIndex of 7" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 24.--27. " ATTR7L ,Attribute 7 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 7 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x04 20.--23. " ATTR6H ,Attribute 6 High. Outer memory attributes for MPU regions with an AttrIndex of 6" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 16.--19. " ATTR6L ,Attribute 6 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 6 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x04 12.--15. " ATTR5H ,Attribute 5 High. Outer memory attributes for MPU regions with an AttrIndex of 5" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 8.--11. " ATTR5L ,Attribute 5 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 5 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x04 4.--7. " ATTR4H ,Attribute 4 High. Outer memory attributes for MPU regions with an AttrIndex of 4" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 0.--3. " ATTR4L ,Attribute 4 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 4 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Security Attribution Unit (SAU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 15. group.long 0xDD0++0x03 line.long 0x00 "SAU_CTRL,SAU Control Register" bitfld.long 0x00 1. " ALLNS ,When SAU_CTRL.ENABLE is 0 this bit controls if the memory is marked as Non-secure or Secure" "Secure,Non-Secure" bitfld.long 0x00 0. " ENABLE ,Enables the SAU" "Disabled,Enabled" rgroup.long 0xDD4++0x03 line.long 0x00 "SAU_TYPE,SAU Type Register" bitfld.long 0x00 0.--7. " SREGION ,The number of implemented SAU regions" "0,1,2,3,4,5,6,7,8,?..." group.long 0xDD8++0x03 line.long 0x00 "SAU_RNR,SAU Region Number Register" hexmask.long.byte 0x00 0.--7. 1. " SAU_RNR ,Indicates the SAU region accessed by SAU_RBAR and SAU_RLAR" tree.close "SAU regions" if PER.ADDRESS.isSECUREEX(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDD0) if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x0 group.long 0xDDC++0x03 "Region 0" saveout 0xDD8 %l 0x0 line.long 0x00 "SAU_RBAR0,SAU Region Base Address Register 0" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x0 line.long 0x00 "SAU_RLAR0,SAU Region Limit Address Register 0" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 0 (not implemented)" saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RBAR0,SAU Region Base Address Register 0" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RLAR0,SAU Region Limit Address Register 0" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x1 group.long 0xDDC++0x03 "Region 1" saveout 0xDD8 %l 0x1 line.long 0x00 "SAU_RBAR1,SAU Region Base Address Register 1" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x1 line.long 0x00 "SAU_RLAR1,SAU Region Limit Address Register 1" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 1 (not implemented)" saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RBAR1,SAU Region Base Address Register 1" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RLAR1,SAU Region Limit Address Register 1" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x2 group.long 0xDDC++0x03 "Region 2" saveout 0xDD8 %l 0x2 line.long 0x00 "SAU_RBAR2,SAU Region Base Address Register 2" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x2 line.long 0x00 "SAU_RLAR2,SAU Region Limit Address Register 2" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 2 (not implemented)" saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RBAR2,SAU Region Base Address Register 2" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RLAR2,SAU Region Limit Address Register 2" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x3 group.long 0xDDC++0x03 "Region 3" saveout 0xDD8 %l 0x3 line.long 0x00 "SAU_RBAR3,SAU Region Base Address Register 3" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x3 line.long 0x00 "SAU_RLAR3,SAU Region Limit Address Register 3" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 3 (not implemented)" saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RBAR3,SAU Region Base Address Register 3" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RLAR3,SAU Region Limit Address Register 3" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x4 group.long 0xDDC++0x03 "Region 4" saveout 0xDD8 %l 0x4 line.long 0x00 "SAU_RBAR4,SAU Region Base Address Register 4" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x4 line.long 0x00 "SAU_RLAR4,SAU Region Limit Address Register 4" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 4 (not implemented)" saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RBAR4,SAU Region Base Address Register 4" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RLAR4,SAU Region Limit Address Register 4" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x5 group.long 0xDDC++0x03 "Region 5" saveout 0xDD8 %l 0x5 line.long 0x00 "SAU_RBAR5,SAU Region Base Address Register 5" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x5 line.long 0x00 "SAU_RLAR5,SAU Region Limit Address Register 5" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 5 (not implemented)" saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RBAR5,SAU Region Base Address Register 5" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RLAR5,SAU Region Limit Address Register 5" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x6 group.long 0xDDC++0x03 "Region 6" saveout 0xDD8 %l 0x6 line.long 0x00 "SAU_RBAR6,SAU Region Base Address Register 6" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x6 line.long 0x00 "SAU_RLAR6,SAU Region Limit Address Register 6" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 6 (not implemented)" saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RBAR6,SAU Region Base Address Register 6" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RLAR6,SAU Region Limit Address Register 6" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x7 group.long 0xDDC++0x03 "Region 7" saveout 0xDD8 %l 0x7 line.long 0x00 "SAU_RBAR7,SAU Region Base Address Register 7" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x7 line.long 0x00 "SAU_RLAR7,SAU Region Limit Address Register 7" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 7 (not implemented)" saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RBAR7,SAU Region Base Address Register 7" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RLAR7,SAU Region Limit Address Register 7" endif else hgroup.long 0xDDC++0x03 "Region 0 (not accessible)" saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RBAR0,SAU Region Base Address Register 0" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RLAR0,SAU Region Limit Address Register 0" hgroup.long 0xDDC++0x03 "Region 1 (not accessible)" saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RBAR1,SAU Region Base Address Register 1" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RLAR1,SAU Region Limit Address Register 1" hgroup.long 0xDDC++0x03 "Region 2 (not accessible)" saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RBAR2,SAU Region Base Address Register 2" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RLAR2,SAU Region Limit Address Register 2" hgroup.long 0xDDC++0x03 "Region 3 (not accessible)" saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RBAR3,SAU Region Base Address Register 3" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RLAR3,SAU Region Limit Address Register 3" hgroup.long 0xDDC++0x03 "Region 4 (not accessible)" saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RBAR4,SAU Region Base Address Register 4" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RLAR4,SAU Region Limit Address Register 4" hgroup.long 0xDDC++0x03 "Region 5 (not accessible)" saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RBAR5,SAU Region Base Address Register 5" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RLAR5,SAU Region Limit Address Register 5" hgroup.long 0xDDC++0x03 "Region 6 (not accessible)" saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RBAR6,SAU Region Base Address Register 6" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RLAR6,SAU Region Limit Address Register 6" hgroup.long 0xDDC++0x03 "Region 7 (not accessible)" saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RBAR7,SAU Region Base Address Register 7" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RLAR7,SAU Region Limit Address Register 7" endif tree.end group.long 0xDE4++0x03 line.long 0x00 "SFSR,Secure Fault Status Register" bitfld.long 0x00 7. " LSERR ,Lazy state error flag" "Not occurred,Occurred" bitfld.long 0x00 6. " SFARVALID ,Secure fault address valid" "Not valid,Valid" bitfld.long 0x00 5. " LSPERR ,Lazy state preservation error flag" "Not occurred,Occurred" textline " " bitfld.long 0x00 4. " INVTRAN ,Invalid transition flag" "Not occurred,Occurred" bitfld.long 0x00 3. " AUVIOL ,Attribution unit violation flag" "Not occurred,Occurred" bitfld.long 0x00 2. " INVER ,Invalid exception return flag" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " INVIS ,Invalid integrity signature flag" "Not occurred,Occurred" bitfld.long 0x00 0. " INVEP ,Invalid entry point" "Not occurred,Occurred" group.long 0xDE8++0x03 line.long 0x00 "SFAR,Secure Fault Address Register" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Nested Vectored Interrupt Controller (NVIC)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 6. group.long 0x04++0x03 line.long 0x00 "ICTR,Interrupt Controller Type Register" bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,0-64,0-96,0-128,0-160,0-192,0-224,0-255,0-287,0-319,0-351,0-383,0-415,0-447,0-479,0-511" width 24. tree "Interrupt Enable Registers" group.long 0x100++0x03 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x104++0x03 line.long 0x00 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x104++0x03 hide.long 0x00 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x108++0x03 line.long 0x00 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x108++0x03 hide.long 0x00 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x10C++0x03 line.long 0x00 "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x10C++0x03 hide.long 0x00 "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x110++0x03 line.long 0x00 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x110++0x03 hide.long 0x00 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x114++0x03 line.long 0x00 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x114++0x03 hide.long 0x00 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x118++0x03 line.long 0x00 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x118++0x03 hide.long 0x00 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x11C++0x03 line.long 0x00 "IRQ224_255_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA255 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA254 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA253 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA252 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA251 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA250 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA249 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA248 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA247 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA246 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA245 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA244 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA243 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA242 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA241 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA240 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x11C++0x03 hide.long 0x00 "IRQ224_255_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x120++0x03 line.long 0x00 "IRQ256_287_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA287 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA286 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA285 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA284 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA283 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA282 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA281 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA280 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA279 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA278 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA277 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA276 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA275 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA274 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA273 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA272 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA271 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA270 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA269 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA268 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA267 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA266 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA265 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA264 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA263 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA262 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA261 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA260 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA259 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA258 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA257 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA256 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x120++0x03 hide.long 0x00 "IRQ256_287_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x124++0x03 line.long 0x00 "IRQ288_319_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA319 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA318 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA317 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA316 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA315 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA314 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA313 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA312 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA311 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA310 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA309 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA308 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA307 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA306 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA305 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA304 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA303 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA302 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA301 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA300 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA299 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA298 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA297 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA296 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA295 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA294 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA293 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA292 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA291 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA290 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA289 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA288 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x124++0x03 hide.long 0x00 "IRQ288_319_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x128++0x03 line.long 0x00 "IRQ320_351_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA351 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA350 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA349 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA348 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA347 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA346 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA345 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA344 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA343 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA342 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA341 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA340 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA339 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA338 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA337 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA336 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA335 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA334 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA333 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA332 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA331 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA330 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA329 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA328 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA327 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA326 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA325 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA324 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA323 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA322 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA321 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA320 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x128++0x03 hide.long 0x00 "IRQ320_351_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x12C++0x03 line.long 0x00 "IRQ352_383_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA383 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA382 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA381 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA380 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA379 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA378 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA377 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA376 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA375 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA374 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA373 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA372 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA371 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA370 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA369 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA368 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA367 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA366 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA365 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA364 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA363 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA362 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA361 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA360 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA359 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA358 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA357 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA356 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA355 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA354 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA353 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA352 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x12C++0x03 hide.long 0x00 "IRQ352_383_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x130++0x03 line.long 0x00 "IRQ384_415_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA415 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA414 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA413 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA412 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA411 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA410 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA409 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA408 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA407 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA406 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA405 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA404 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA403 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA402 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA401 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA400 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA399 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA398 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA397 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA396 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA395 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA394 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA393 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA392 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA391 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA390 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA389 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA388 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA387 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA386 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA385 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA384 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x130++0x03 hide.long 0x00 "IRQ384_415_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x134++0x03 line.long 0x00 "IRQ416_447_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA447 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA446 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA445 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA444 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA443 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA442 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA441 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA440 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA439 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA438 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA437 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA436 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA435 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA434 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA433 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA432 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA431 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA430 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA429 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA428 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA427 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA426 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA425 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA424 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA423 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA422 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA421 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA420 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA419 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA418 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA417 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA416 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x134++0x03 hide.long 0x00 "IRQ416_447_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x138++0x03 line.long 0x00 "IRQ448_479_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA479 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA478 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA477 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA476 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA475 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA474 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA473 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA472 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA471 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA470 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA469 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA468 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA467 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA466 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA465 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA464 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA463 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA462 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA461 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA460 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA459 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA458 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA457 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA456 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA455 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA454 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA453 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA452 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA451 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA450 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA449 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA448 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x138++0x03 hide.long 0x00 "IRQ448_479_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0F) group.long 0x13C++0x03 line.long 0x00 "IRQ480_511_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA511 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA510 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA509 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA508 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA507 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA506 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA505 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA504 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA503 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA502 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA501 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA500 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA499 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA498 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA497 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA496 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA495 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA494 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA493 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA492 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA491 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA490 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA489 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA488 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA487 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA486 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA485 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA484 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA483 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA482 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA481 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA480 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x13C++0x03 hide.long 0x00 "IRQ480_511_EN_SET/CLR,Interrupt Enable Register" endif tree.end width 24. tree "Interrupt Pending Registers" group.long 0x200++0x03 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x204++0x03 line.long 0x00 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x204++0x03 hide.long 0x00 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x208++0x03 line.long 0x00 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x208++0x03 hide.long 0x00 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x20C++0x03 line.long 0x00 "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x20C++0x03 hide.long 0x00 "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x210++0x03 line.long 0x00 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x210++0x03 hide.long 0x00 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x214++0x03 line.long 0x00 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x214++0x03 hide.long 0x00 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x218++0x03 line.long 0x00 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x218++0x03 hide.long 0x00 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x21C++0x03 line.long 0x00 "IRQ224_255_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN255 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN254 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN253 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN252 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN251 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN250 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN249 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN248 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN247 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN246 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN245 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN244 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN243 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN242 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN241 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN240 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x21C++0x03 hide.long 0x00 "IRQ224_255_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x220++0x03 line.long 0x00 "IRQ256_287_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN287 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN286 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN285 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN284 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN283 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN282 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN281 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN280 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN279 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN278 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN277 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN276 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN275 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN274 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN273 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN272 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN271 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN270 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN269 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN268 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN267 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN266 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN265 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN264 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN263 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN262 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN261 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN260 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN259 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN258 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN257 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN256 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x220++0x03 hide.long 0x00 "IRQ256_287_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x224++0x03 line.long 0x00 "IRQ288_319_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN319 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN318 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN317 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN316 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN315 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN314 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN313 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN312 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN311 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN310 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN309 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN308 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN307 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN306 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN305 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN304 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN303 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN302 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN301 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN300 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN299 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN298 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN297 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN296 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN295 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN294 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN293 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN292 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN291 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN290 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN289 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN288 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x224++0x03 hide.long 0x00 "IRQ288_319_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x228++0x03 line.long 0x00 "IRQ320_351_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN351 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN350 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN349 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN348 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN347 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN346 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN345 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN344 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN343 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN342 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN341 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN340 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN339 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN338 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN337 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN336 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN335 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN334 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN333 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN332 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN331 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN330 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN329 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN328 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN327 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN326 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN325 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN324 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN323 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN322 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN321 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN320 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x228++0x03 hide.long 0x00 "IRQ320_351_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x22C++0x03 line.long 0x00 "IRQ352_383_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN383 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN382 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN381 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN380 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN379 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN378 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN377 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN376 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN375 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN374 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN373 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN372 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN371 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN370 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN369 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN368 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN367 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN366 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN365 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN364 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN363 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN362 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN361 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN360 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN359 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN358 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN357 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN356 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN355 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN354 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN353 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN352 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x22C++0x03 hide.long 0x00 "IRQ352_383_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x230++0x03 line.long 0x00 "IRQ384_415_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN415 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN414 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN413 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN412 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN411 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN410 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN409 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN408 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN407 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN406 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN405 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN404 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN403 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN402 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN401 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN400 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN399 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN398 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN397 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN396 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN395 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN394 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN393 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN392 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN391 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN390 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN389 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN388 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN387 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN386 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN385 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN384 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x230++0x03 hide.long 0x00 "IRQ384_415_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x234++0x03 line.long 0x00 "IRQ416_447_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN447 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN446 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN445 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN444 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN443 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN442 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN441 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN440 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN439 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN438 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN437 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN436 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN435 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN434 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN433 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN432 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN431 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN430 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN429 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN428 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN427 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN426 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN425 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN424 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN423 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN422 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN421 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN420 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN419 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN418 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN417 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN416 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x234++0x03 hide.long 0x00 "IRQ416_447_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x238++0x03 line.long 0x00 "IRQ448_479_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN479 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN478 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN477 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN476 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN475 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN474 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN473 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN472 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN471 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN470 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN469 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN468 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN467 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN466 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN465 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN464 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN463 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN462 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN461 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN460 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN459 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN458 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN457 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN456 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN455 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN454 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN453 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN452 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN451 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN450 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN449 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN448 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x238++0x03 hide.long 0x00 "IRQ448_479_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0F) group.long 0x23C++0x03 line.long 0x00 "IRQ480_511_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN511 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN510 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN509 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN508 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN507 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN506 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN505 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN504 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN503 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN502 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN501 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN500 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN499 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN498 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN497 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN496 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN495 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN494 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN493 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN492 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN491 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN490 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN489 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN488 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN487 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN486 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN485 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN484 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN483 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN482 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN481 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN480 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x23C++0x03 hide.long 0x00 "IRQ480_511_PEN_SET/CLR,Interrupt Pending Register" endif tree.end width 11. tree "Interrupt Active Bit Registers" rgroup.long 0x300++0x03 line.long 0x00 "ACTIVE0,Active Bit Register 0" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) rgroup.long 0x304++0x03 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x304++0x03 hide.long 0x00 "ACTIVE1,Active Bit Register 1" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) rgroup.long 0x308++0x03 line.long 0x00 "ACTIVE2,Active Bit Register 2" bitfld.long 0x00 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x308++0x03 hide.long 0x00 "ACTIVE2,Active Bit Register 2" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) rgroup.long 0x30C++0x03 line.long 0x00 "ACTIVE3,Active Bit Register 3" bitfld.long 0x00 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x30C++0x03 hide.long 0x00 "ACTIVE3,Active Bit Register 3" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) rgroup.long 0x310++0x03 line.long 0x00 "ACTIVE4,Active Bit Register 4" bitfld.long 0x00 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x310++0x03 hide.long 0x00 "ACTIVE4,Active Bit Register 4" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) rgroup.long 0x314++0x03 line.long 0x00 "ACTIVE5,Active Bit Register 5" bitfld.long 0x00 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x314++0x03 hide.long 0x00 "ACTIVE5,Active Bit Register 5" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) rgroup.long 0x318++0x03 line.long 0x00 "ACTIVE6,Active Bit Register 6" bitfld.long 0x00 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x318++0x03 hide.long 0x00 "ACTIVE6,Active Bit Register 6" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) rgroup.long 0x31C++0x03 line.long 0x00 "ACTIVE7,Active Bit Register 7" bitfld.long 0x00 31. " ACTIVE255 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE254 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE253 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE252 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE251 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE250 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE249 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE248 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE247 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE246 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE245 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE244 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE243 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE242 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE241 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE240 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x31C++0x03 hide.long 0x00 "ACTIVE7,Active Bit Register 7" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) rgroup.long 0x320++0x03 line.long 0x00 "ACTIVE8,Active Bit Register 8" bitfld.long 0x00 31. " ACTIVE287 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE286 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE285 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE284 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE283 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE282 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE281 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE280 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE279 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE278 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE277 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE276 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE275 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE274 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE273 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE272 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE271 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE270 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE269 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE268 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE267 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE266 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE265 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE264 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE263 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE262 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE261 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE260 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE259 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE258 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE257 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE256 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x320++0x03 hide.long 0x00 "ACTIVE8,Active Bit Register 8" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) rgroup.long 0x324++0x03 line.long 0x00 "ACTIVE9,Active Bit Register 9" bitfld.long 0x00 31. " ACTIVE319 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE318 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE317 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE316 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE315 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE314 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE313 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE312 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE311 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE310 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE309 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE308 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE307 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE306 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE305 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE304 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE303 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE302 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE301 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE300 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE299 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE298 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE297 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE296 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE295 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE294 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE293 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE292 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE291 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE290 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE289 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE288 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x324++0x03 hide.long 0x00 "ACTIVE9,Active Bit Register 9" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) rgroup.long 0x328++0x03 line.long 0x00 "ACTIVE10,Active Bit Register 10" bitfld.long 0x00 31. " ACTIVE351 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE350 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE349 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE348 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE347 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE346 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE345 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE344 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE343 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE342 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE341 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE340 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE339 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE338 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE337 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE336 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE335 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE334 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE333 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE332 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE331 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE330 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE329 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE328 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE327 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE326 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE325 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE324 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE323 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE322 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE321 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE320 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x328++0x03 hide.long 0x00 "ACTIVE10,Active Bit Register 10" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) rgroup.long 0x32C++0x03 line.long 0x00 "ACTIVE11,Active Bit Register 11" bitfld.long 0x00 31. " ACTIVE383 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE382 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE381 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE380 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE379 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE378 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE377 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE376 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE375 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE374 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE373 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE372 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE371 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE370 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE369 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE368 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE367 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE366 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE365 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE364 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE363 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE362 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE361 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE360 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE359 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE358 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE357 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE356 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE355 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE354 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE353 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE352 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x32C++0x03 hide.long 0x00 "ACTIVE11,Active Bit Register 11" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) rgroup.long 0x330++0x03 line.long 0x00 "ACTIVE12,Active Bit Register 12" bitfld.long 0x00 31. " ACTIVE415 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE414 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE413 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE412 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE411 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE410 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE409 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE408 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE407 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE406 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE405 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE404 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE403 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE402 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE401 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE400 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE399 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE398 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE397 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE396 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE395 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE394 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE393 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE392 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE391 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE390 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE389 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE388 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE387 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE386 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE385 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE384 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x330++0x03 hide.long 0x00 "ACTIVE12,Active Bit Register 12" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) rgroup.long 0x334++0x03 line.long 0x00 "ACTIVE13,Active Bit Register 13" bitfld.long 0x00 31. " ACTIVE447 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE446 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE445 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE444 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE443 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE442 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE441 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE440 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE439 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE438 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE437 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE436 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE435 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE434 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE433 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE432 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE431 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE430 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE429 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE428 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE427 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE426 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE425 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE424 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE423 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE422 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE421 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE420 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE419 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE418 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE417 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE416 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x334++0x03 hide.long 0x00 "ACTIVE13,Active Bit Register 13" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) rgroup.long 0x338++0x03 line.long 0x00 "ACTIVE14,Active Bit Register 14" bitfld.long 0x00 31. " ACTIVE479 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE478 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE477 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE476 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE475 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE474 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE473 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE472 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE471 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE470 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE469 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE468 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE467 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE466 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE465 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE464 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE463 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE462 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE461 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE460 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE459 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE458 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE457 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE456 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE455 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE454 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE453 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE452 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE451 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE450 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE449 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE448 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x338++0x03 hide.long 0x00 "ACTIVE14,Active Bit Register 14" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0F) rgroup.long 0x33C++0x03 line.long 0x00 "ACTIVE15,Active Bit Register 15" bitfld.long 0x00 31. " ACTIVE511 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE510 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE509 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE508 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE507 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE506 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE505 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE504 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE503 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE502 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE501 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE500 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE499 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE498 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE497 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE496 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE495 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE494 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE493 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE492 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE491 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE490 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE489 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE488 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE487 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE486 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE485 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE484 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE483 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE482 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE481 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE480 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x33C++0x03 hide.long 0x00 "ACTIVE15,Active Bit Register 15" endif tree.end width 13. tree "Interrupt Target Non-Secure Registers" group.long 0x380++0x03 line.long 0x00 "NVIC_ITNS0,Interrupt Target Non-Secure Register 0" bitfld.long 0x00 31. " ITNS31 ,Interrupt Targets Non-secure 31" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS30 ,Interrupt Targets Non-secure 30" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS29 ,Interrupt Targets Non-secure 29" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS28 ,Interrupt Targets Non-secure 28" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS27 ,Interrupt Targets Non-secure 27" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS26 ,Interrupt Targets Non-secure 26" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS25 ,Interrupt Targets Non-secure 25" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS24 ,Interrupt Targets Non-secure 24" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS23 ,Interrupt Targets Non-secure 23" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS22 ,Interrupt Targets Non-secure 22" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS21 ,Interrupt Targets Non-secure 21" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS20 ,Interrupt Targets Non-secure 20" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS19 ,Interrupt Targets Non-secure 19" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS18 ,Interrupt Targets Non-secure 18" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS17 ,Interrupt Targets Non-secure 17" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS16 ,Interrupt Targets Non-secure 16" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS15 ,Interrupt Targets Non-secure 15" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS14 ,Interrupt Targets Non-secure 14" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS13 ,Interrupt Targets Non-secure 13" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS12 ,Interrupt Targets Non-secure 12" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS11 ,Interrupt Targets Non-secure 11" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS10 ,Interrupt Targets Non-secure 10" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS9 ,Interrupt Targets Non-secure 9" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS8 ,Interrupt Targets Non-secure 8" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS7 ,Interrupt Targets Non-secure 7" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS6 ,Interrupt Targets Non-secure 6" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS5 ,Interrupt Targets Non-secure 5" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS4 ,Interrupt Targets Non-secure 4" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS3 ,Interrupt Targets Non-secure 3" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS2 ,Interrupt Targets Non-secure 2" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS1 ,Interrupt Targets Non-secure 1" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS0 ,Interrupt Targets Non-secure 0" "Secure,Non-secure" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x384++0x03 line.long 0x00 "NVIC_ITNS1,Interrupt Target Non-Secure Register 1" bitfld.long 0x00 31. " ITNS63 ,Interrupt Targets Non-secure 63" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS62 ,Interrupt Targets Non-secure 62" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS61 ,Interrupt Targets Non-secure 61" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS60 ,Interrupt Targets Non-secure 60" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS59 ,Interrupt Targets Non-secure 59" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS58 ,Interrupt Targets Non-secure 58" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS57 ,Interrupt Targets Non-secure 57" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS56 ,Interrupt Targets Non-secure 56" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS55 ,Interrupt Targets Non-secure 55" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS54 ,Interrupt Targets Non-secure 54" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS53 ,Interrupt Targets Non-secure 53" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS52 ,Interrupt Targets Non-secure 52" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS51 ,Interrupt Targets Non-secure 51" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS50 ,Interrupt Targets Non-secure 50" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS49 ,Interrupt Targets Non-secure 49" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS48 ,Interrupt Targets Non-secure 48" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS47 ,Interrupt Targets Non-secure 47" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS46 ,Interrupt Targets Non-secure 46" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS45 ,Interrupt Targets Non-secure 45" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS44 ,Interrupt Targets Non-secure 44" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS43 ,Interrupt Targets Non-secure 43" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS42 ,Interrupt Targets Non-secure 42" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS41 ,Interrupt Targets Non-secure 41" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS40 ,Interrupt Targets Non-secure 40" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS39 ,Interrupt Targets Non-secure 39" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS38 ,Interrupt Targets Non-secure 38" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS37 ,Interrupt Targets Non-secure 37" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS36 ,Interrupt Targets Non-secure 36" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS35 ,Interrupt Targets Non-secure 35" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS34 ,Interrupt Targets Non-secure 34" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS33 ,Interrupt Targets Non-secure 33" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS32 ,Interrupt Targets Non-secure 32" "Secure,Non-secure" else hgroup.long 0x384++0x03 hide.long 0x00 "NVIC_ITNS1,Interrupt Target Non-Secure Register 1" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x388++0x03 line.long 0x00 "NVIC_ITNS2,Interrupt Target Non-Secure Register 2" bitfld.long 0x00 31. " ITNS95 ,Interrupt Targets Non-secure 95" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS94 ,Interrupt Targets Non-secure 94" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS93 ,Interrupt Targets Non-secure 93" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS92 ,Interrupt Targets Non-secure 92" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS91 ,Interrupt Targets Non-secure 91" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS90 ,Interrupt Targets Non-secure 90" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS89 ,Interrupt Targets Non-secure 89" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS88 ,Interrupt Targets Non-secure 88" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS87 ,Interrupt Targets Non-secure 87" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS86 ,Interrupt Targets Non-secure 86" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS85 ,Interrupt Targets Non-secure 85" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS84 ,Interrupt Targets Non-secure 84" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS83 ,Interrupt Targets Non-secure 83" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS82 ,Interrupt Targets Non-secure 82" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS81 ,Interrupt Targets Non-secure 81" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS80 ,Interrupt Targets Non-secure 80" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS79 ,Interrupt Targets Non-secure 79" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS78 ,Interrupt Targets Non-secure 78" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS77 ,Interrupt Targets Non-secure 77" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS76 ,Interrupt Targets Non-secure 76" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS75 ,Interrupt Targets Non-secure 75" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS74 ,Interrupt Targets Non-secure 74" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS73 ,Interrupt Targets Non-secure 73" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS72 ,Interrupt Targets Non-secure 72" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS71 ,Interrupt Targets Non-secure 71" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS70 ,Interrupt Targets Non-secure 70" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS69 ,Interrupt Targets Non-secure 69" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS68 ,Interrupt Targets Non-secure 68" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS67 ,Interrupt Targets Non-secure 67" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS66 ,Interrupt Targets Non-secure 66" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS65 ,Interrupt Targets Non-secure 65" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS64 ,Interrupt Targets Non-secure 64" "Secure,Non-secure" else hgroup.long 0x388++0x03 hide.long 0x00 "NVIC_ITNS2,Interrupt Target Non-Secure Register 2" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x38C++0x03 line.long 0x00 "NVIC_ITNS3,Interrupt Target Non-Secure Register 3" bitfld.long 0x00 31. " ITNS127 ,Interrupt Targets Non-secure 127" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS126 ,Interrupt Targets Non-secure 126" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS125 ,Interrupt Targets Non-secure 125" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS124 ,Interrupt Targets Non-secure 124" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS123 ,Interrupt Targets Non-secure 123" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS122 ,Interrupt Targets Non-secure 122" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS121 ,Interrupt Targets Non-secure 121" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS120 ,Interrupt Targets Non-secure 120" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS119 ,Interrupt Targets Non-secure 119" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS118 ,Interrupt Targets Non-secure 118" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS117 ,Interrupt Targets Non-secure 117" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS116 ,Interrupt Targets Non-secure 116" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS115 ,Interrupt Targets Non-secure 115" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS114 ,Interrupt Targets Non-secure 114" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS113 ,Interrupt Targets Non-secure 113" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS112 ,Interrupt Targets Non-secure 112" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS111 ,Interrupt Targets Non-secure 111" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS110 ,Interrupt Targets Non-secure 110" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS109 ,Interrupt Targets Non-secure 109" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS108 ,Interrupt Targets Non-secure 108" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS107 ,Interrupt Targets Non-secure 107" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS106 ,Interrupt Targets Non-secure 106" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS105 ,Interrupt Targets Non-secure 105" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS104 ,Interrupt Targets Non-secure 104" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS103 ,Interrupt Targets Non-secure 103" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS102 ,Interrupt Targets Non-secure 102" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS101 ,Interrupt Targets Non-secure 101" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS100 ,Interrupt Targets Non-secure 100" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS99 ,Interrupt Targets Non-secure 99" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS98 ,Interrupt Targets Non-secure 98" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS97 ,Interrupt Targets Non-secure 97" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS96 ,Interrupt Targets Non-secure 96" "Secure,Non-secure" else hgroup.long 0x38C++0x03 hide.long 0x00 "NVIC_ITNS3,Interrupt Target Non-Secure Register 3" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x390++0x03 line.long 0x00 "NVIC_ITNS4,Interrupt Target Non-Secure Register 4" bitfld.long 0x00 31. " ITNS159 ,Interrupt Targets Non-secure 159" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS158 ,Interrupt Targets Non-secure 158" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS157 ,Interrupt Targets Non-secure 157" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS156 ,Interrupt Targets Non-secure 156" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS155 ,Interrupt Targets Non-secure 155" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS154 ,Interrupt Targets Non-secure 154" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS153 ,Interrupt Targets Non-secure 153" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS152 ,Interrupt Targets Non-secure 152" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS151 ,Interrupt Targets Non-secure 151" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS150 ,Interrupt Targets Non-secure 150" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS149 ,Interrupt Targets Non-secure 149" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS148 ,Interrupt Targets Non-secure 148" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS147 ,Interrupt Targets Non-secure 147" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS146 ,Interrupt Targets Non-secure 146" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS145 ,Interrupt Targets Non-secure 145" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS144 ,Interrupt Targets Non-secure 144" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS143 ,Interrupt Targets Non-secure 143" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS142 ,Interrupt Targets Non-secure 142" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS141 ,Interrupt Targets Non-secure 141" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS140 ,Interrupt Targets Non-secure 140" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS139 ,Interrupt Targets Non-secure 139" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS138 ,Interrupt Targets Non-secure 138" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS137 ,Interrupt Targets Non-secure 137" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS136 ,Interrupt Targets Non-secure 136" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS135 ,Interrupt Targets Non-secure 135" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS134 ,Interrupt Targets Non-secure 134" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS133 ,Interrupt Targets Non-secure 133" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS132 ,Interrupt Targets Non-secure 132" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS131 ,Interrupt Targets Non-secure 131" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS130 ,Interrupt Targets Non-secure 130" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS129 ,Interrupt Targets Non-secure 129" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS128 ,Interrupt Targets Non-secure 128" "Secure,Non-secure" else hgroup.long 0x390++0x03 hide.long 0x00 "NVIC_ITNS4,Interrupt Target Non-Secure Register 4" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x394++0x03 line.long 0x00 "NVIC_ITNS5,Interrupt Target Non-Secure Register 5" bitfld.long 0x00 31. " ITNS191 ,Interrupt Targets Non-secure 191" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS190 ,Interrupt Targets Non-secure 190" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS189 ,Interrupt Targets Non-secure 189" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS188 ,Interrupt Targets Non-secure 188" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS187 ,Interrupt Targets Non-secure 187" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS186 ,Interrupt Targets Non-secure 186" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS185 ,Interrupt Targets Non-secure 185" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS184 ,Interrupt Targets Non-secure 184" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS183 ,Interrupt Targets Non-secure 183" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS182 ,Interrupt Targets Non-secure 182" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS181 ,Interrupt Targets Non-secure 181" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS180 ,Interrupt Targets Non-secure 180" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS179 ,Interrupt Targets Non-secure 179" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS178 ,Interrupt Targets Non-secure 178" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS177 ,Interrupt Targets Non-secure 177" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS176 ,Interrupt Targets Non-secure 176" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS175 ,Interrupt Targets Non-secure 175" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS174 ,Interrupt Targets Non-secure 174" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS173 ,Interrupt Targets Non-secure 173" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS172 ,Interrupt Targets Non-secure 172" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS171 ,Interrupt Targets Non-secure 171" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS170 ,Interrupt Targets Non-secure 170" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS169 ,Interrupt Targets Non-secure 169" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS168 ,Interrupt Targets Non-secure 168" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS167 ,Interrupt Targets Non-secure 167" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS166 ,Interrupt Targets Non-secure 166" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS165 ,Interrupt Targets Non-secure 165" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS164 ,Interrupt Targets Non-secure 164" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS163 ,Interrupt Targets Non-secure 163" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS162 ,Interrupt Targets Non-secure 162" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS161 ,Interrupt Targets Non-secure 161" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS160 ,Interrupt Targets Non-secure 160" "Secure,Non-secure" else hgroup.long 0x394++0x03 hide.long 0x00 "NVIC_ITNS5,Interrupt Target Non-Secure Register 5" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x398++0x03 line.long 0x00 "NVIC_ITNS6,Interrupt Target Non-Secure Register 6" bitfld.long 0x00 31. " ITNS223 ,Interrupt Targets Non-secure 223" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS222 ,Interrupt Targets Non-secure 222" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS221 ,Interrupt Targets Non-secure 221" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS220 ,Interrupt Targets Non-secure 220" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS219 ,Interrupt Targets Non-secure 219" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS218 ,Interrupt Targets Non-secure 218" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS217 ,Interrupt Targets Non-secure 217" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS216 ,Interrupt Targets Non-secure 216" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS215 ,Interrupt Targets Non-secure 215" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS214 ,Interrupt Targets Non-secure 214" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS213 ,Interrupt Targets Non-secure 213" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS212 ,Interrupt Targets Non-secure 212" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS211 ,Interrupt Targets Non-secure 211" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS210 ,Interrupt Targets Non-secure 210" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS209 ,Interrupt Targets Non-secure 209" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS208 ,Interrupt Targets Non-secure 208" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS207 ,Interrupt Targets Non-secure 207" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS206 ,Interrupt Targets Non-secure 206" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS205 ,Interrupt Targets Non-secure 205" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS204 ,Interrupt Targets Non-secure 204" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS203 ,Interrupt Targets Non-secure 203" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS202 ,Interrupt Targets Non-secure 202" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS201 ,Interrupt Targets Non-secure 201" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS200 ,Interrupt Targets Non-secure 200" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS199 ,Interrupt Targets Non-secure 199" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS198 ,Interrupt Targets Non-secure 198" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS197 ,Interrupt Targets Non-secure 197" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS196 ,Interrupt Targets Non-secure 196" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS195 ,Interrupt Targets Non-secure 195" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS194 ,Interrupt Targets Non-secure 194" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS193 ,Interrupt Targets Non-secure 193" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS192 ,Interrupt Targets Non-secure 192" "Secure,Non-secure" else hgroup.long 0x398++0x03 hide.long 0x00 "NVIC_ITNS6,Interrupt Target Non-Secure Register 6" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x39C++0x03 line.long 0x00 "NVIC_ITNS7,Interrupt Target Non-Secure Register 7" bitfld.long 0x00 31. " ITNS255 ,Interrupt Targets Non-secure 255" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS254 ,Interrupt Targets Non-secure 254" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS253 ,Interrupt Targets Non-secure 253" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS252 ,Interrupt Targets Non-secure 252" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS251 ,Interrupt Targets Non-secure 251" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS250 ,Interrupt Targets Non-secure 250" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS249 ,Interrupt Targets Non-secure 249" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS248 ,Interrupt Targets Non-secure 248" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS247 ,Interrupt Targets Non-secure 247" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS246 ,Interrupt Targets Non-secure 246" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS245 ,Interrupt Targets Non-secure 245" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS244 ,Interrupt Targets Non-secure 244" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS243 ,Interrupt Targets Non-secure 243" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS242 ,Interrupt Targets Non-secure 242" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS241 ,Interrupt Targets Non-secure 241" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS240 ,Interrupt Targets Non-secure 240" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS239 ,Interrupt Targets Non-secure 239" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS238 ,Interrupt Targets Non-secure 238" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS237 ,Interrupt Targets Non-secure 237" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS236 ,Interrupt Targets Non-secure 236" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS235 ,Interrupt Targets Non-secure 235" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS234 ,Interrupt Targets Non-secure 234" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS233 ,Interrupt Targets Non-secure 233" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS232 ,Interrupt Targets Non-secure 232" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS231 ,Interrupt Targets Non-secure 231" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS230 ,Interrupt Targets Non-secure 230" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS229 ,Interrupt Targets Non-secure 229" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS228 ,Interrupt Targets Non-secure 228" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS227 ,Interrupt Targets Non-secure 227" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS226 ,Interrupt Targets Non-secure 226" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS225 ,Interrupt Targets Non-secure 225" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS224 ,Interrupt Targets Non-secure 224" "Secure,Non-secure" else hgroup.long 0x39C++0x03 hide.long 0x00 "NVIC_ITNS7,Interrupt Target Non-Secure Register 7" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x3A0++0x03 line.long 0x00 "NVIC_ITNS8,Interrupt Target Non-Secure Register 8" bitfld.long 0x00 31. " ITNS287 ,Interrupt Targets Non-secure 287" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS286 ,Interrupt Targets Non-secure 286" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS285 ,Interrupt Targets Non-secure 285" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS284 ,Interrupt Targets Non-secure 284" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS283 ,Interrupt Targets Non-secure 283" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS282 ,Interrupt Targets Non-secure 282" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS281 ,Interrupt Targets Non-secure 281" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS280 ,Interrupt Targets Non-secure 280" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS279 ,Interrupt Targets Non-secure 279" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS278 ,Interrupt Targets Non-secure 278" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS277 ,Interrupt Targets Non-secure 277" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS276 ,Interrupt Targets Non-secure 276" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS275 ,Interrupt Targets Non-secure 275" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS274 ,Interrupt Targets Non-secure 274" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS273 ,Interrupt Targets Non-secure 273" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS272 ,Interrupt Targets Non-secure 272" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS271 ,Interrupt Targets Non-secure 271" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS270 ,Interrupt Targets Non-secure 270" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS269 ,Interrupt Targets Non-secure 269" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS268 ,Interrupt Targets Non-secure 268" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS267 ,Interrupt Targets Non-secure 267" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS266 ,Interrupt Targets Non-secure 266" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS265 ,Interrupt Targets Non-secure 265" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS264 ,Interrupt Targets Non-secure 264" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS263 ,Interrupt Targets Non-secure 263" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS262 ,Interrupt Targets Non-secure 262" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS261 ,Interrupt Targets Non-secure 261" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS260 ,Interrupt Targets Non-secure 260" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS259 ,Interrupt Targets Non-secure 259" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS258 ,Interrupt Targets Non-secure 258" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS257 ,Interrupt Targets Non-secure 257" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS256 ,Interrupt Targets Non-secure 256" "Secure,Non-secure" else hgroup.long 0x3A0++0x03 hide.long 0x00 "NVIC_ITNS8,Interrupt Target Non-Secure Register 8" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x3A4++0x03 line.long 0x00 "NVIC_ITNS9,Interrupt Target Non-Secure Register 9" bitfld.long 0x00 31. " ITNS319 ,Interrupt Targets Non-secure 319" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS318 ,Interrupt Targets Non-secure 318" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS317 ,Interrupt Targets Non-secure 317" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS316 ,Interrupt Targets Non-secure 316" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS315 ,Interrupt Targets Non-secure 315" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS314 ,Interrupt Targets Non-secure 314" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS313 ,Interrupt Targets Non-secure 313" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS312 ,Interrupt Targets Non-secure 312" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS311 ,Interrupt Targets Non-secure 311" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS310 ,Interrupt Targets Non-secure 310" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS309 ,Interrupt Targets Non-secure 309" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS308 ,Interrupt Targets Non-secure 308" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS307 ,Interrupt Targets Non-secure 307" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS306 ,Interrupt Targets Non-secure 306" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS305 ,Interrupt Targets Non-secure 305" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS304 ,Interrupt Targets Non-secure 304" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS303 ,Interrupt Targets Non-secure 303" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS302 ,Interrupt Targets Non-secure 302" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS301 ,Interrupt Targets Non-secure 301" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS300 ,Interrupt Targets Non-secure 300" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS299 ,Interrupt Targets Non-secure 299" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS298 ,Interrupt Targets Non-secure 298" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS297 ,Interrupt Targets Non-secure 297" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS296 ,Interrupt Targets Non-secure 296" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS295 ,Interrupt Targets Non-secure 295" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS294 ,Interrupt Targets Non-secure 294" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS293 ,Interrupt Targets Non-secure 293" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS292 ,Interrupt Targets Non-secure 292" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS291 ,Interrupt Targets Non-secure 291" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS290 ,Interrupt Targets Non-secure 290" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS289 ,Interrupt Targets Non-secure 289" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS288 ,Interrupt Targets Non-secure 288" "Secure,Non-secure" else hgroup.long 0x3A4++0x03 hide.long 0x00 "NVIC_ITNS9,Interrupt Target Non-Secure Register 9" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x3A8++0x03 line.long 0x00 "NVIC_ITNS10,Interrupt Target Non-Secure Register 10" bitfld.long 0x00 31. " ITNS351 ,Interrupt Targets Non-secure 351" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS350 ,Interrupt Targets Non-secure 350" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS349 ,Interrupt Targets Non-secure 349" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS348 ,Interrupt Targets Non-secure 348" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS347 ,Interrupt Targets Non-secure 347" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS346 ,Interrupt Targets Non-secure 346" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS345 ,Interrupt Targets Non-secure 345" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS344 ,Interrupt Targets Non-secure 344" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS343 ,Interrupt Targets Non-secure 343" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS342 ,Interrupt Targets Non-secure 342" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS341 ,Interrupt Targets Non-secure 341" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS340 ,Interrupt Targets Non-secure 340" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS339 ,Interrupt Targets Non-secure 339" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS338 ,Interrupt Targets Non-secure 338" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS337 ,Interrupt Targets Non-secure 337" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS336 ,Interrupt Targets Non-secure 336" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS335 ,Interrupt Targets Non-secure 335" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS334 ,Interrupt Targets Non-secure 334" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS333 ,Interrupt Targets Non-secure 333" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS332 ,Interrupt Targets Non-secure 332" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS331 ,Interrupt Targets Non-secure 331" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS330 ,Interrupt Targets Non-secure 330" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS329 ,Interrupt Targets Non-secure 329" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS328 ,Interrupt Targets Non-secure 328" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS327 ,Interrupt Targets Non-secure 327" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS326 ,Interrupt Targets Non-secure 326" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS325 ,Interrupt Targets Non-secure 325" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS324 ,Interrupt Targets Non-secure 324" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS323 ,Interrupt Targets Non-secure 323" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS322 ,Interrupt Targets Non-secure 322" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS321 ,Interrupt Targets Non-secure 321" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS320 ,Interrupt Targets Non-secure 320" "Secure,Non-secure" else hgroup.long 0x3A8++0x03 hide.long 0x00 "NVIC_ITNS10,Interrupt Target Non-Secure Register 10" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x3AC++0x03 line.long 0x00 "NVIC_ITNS11,Interrupt Target Non-Secure Register 11" bitfld.long 0x00 31. " ITNS383 ,Interrupt Targets Non-secure 383" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS382 ,Interrupt Targets Non-secure 382" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS381 ,Interrupt Targets Non-secure 381" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS380 ,Interrupt Targets Non-secure 380" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS379 ,Interrupt Targets Non-secure 379" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS378 ,Interrupt Targets Non-secure 378" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS377 ,Interrupt Targets Non-secure 377" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS376 ,Interrupt Targets Non-secure 376" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS375 ,Interrupt Targets Non-secure 375" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS374 ,Interrupt Targets Non-secure 374" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS373 ,Interrupt Targets Non-secure 373" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS372 ,Interrupt Targets Non-secure 372" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS371 ,Interrupt Targets Non-secure 371" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS370 ,Interrupt Targets Non-secure 370" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS369 ,Interrupt Targets Non-secure 369" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS368 ,Interrupt Targets Non-secure 368" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS367 ,Interrupt Targets Non-secure 367" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS366 ,Interrupt Targets Non-secure 366" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS365 ,Interrupt Targets Non-secure 365" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS364 ,Interrupt Targets Non-secure 364" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS363 ,Interrupt Targets Non-secure 363" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS362 ,Interrupt Targets Non-secure 362" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS361 ,Interrupt Targets Non-secure 361" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS360 ,Interrupt Targets Non-secure 360" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS359 ,Interrupt Targets Non-secure 359" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS358 ,Interrupt Targets Non-secure 358" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS357 ,Interrupt Targets Non-secure 357" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS356 ,Interrupt Targets Non-secure 356" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS355 ,Interrupt Targets Non-secure 355" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS354 ,Interrupt Targets Non-secure 354" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS353 ,Interrupt Targets Non-secure 353" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS352 ,Interrupt Targets Non-secure 352" "Secure,Non-secure" else hgroup.long 0x3AC++0x03 hide.long 0x00 "NVIC_ITNS11,Interrupt Target Non-Secure Register 11" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x3B0++0x03 line.long 0x00 "NVIC_ITNS12,Interrupt Target Non-Secure Register 12" bitfld.long 0x00 31. " ITNS415 ,Interrupt Targets Non-secure 415" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS414 ,Interrupt Targets Non-secure 414" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS413 ,Interrupt Targets Non-secure 413" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS412 ,Interrupt Targets Non-secure 412" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS411 ,Interrupt Targets Non-secure 411" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS410 ,Interrupt Targets Non-secure 410" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS409 ,Interrupt Targets Non-secure 409" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS408 ,Interrupt Targets Non-secure 408" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS407 ,Interrupt Targets Non-secure 407" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS406 ,Interrupt Targets Non-secure 406" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS405 ,Interrupt Targets Non-secure 405" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS404 ,Interrupt Targets Non-secure 404" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS403 ,Interrupt Targets Non-secure 403" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS402 ,Interrupt Targets Non-secure 402" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS401 ,Interrupt Targets Non-secure 401" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS400 ,Interrupt Targets Non-secure 400" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS399 ,Interrupt Targets Non-secure 399" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS398 ,Interrupt Targets Non-secure 398" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS397 ,Interrupt Targets Non-secure 397" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS396 ,Interrupt Targets Non-secure 396" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS395 ,Interrupt Targets Non-secure 395" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS394 ,Interrupt Targets Non-secure 394" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS393 ,Interrupt Targets Non-secure 393" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS392 ,Interrupt Targets Non-secure 392" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS391 ,Interrupt Targets Non-secure 391" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS390 ,Interrupt Targets Non-secure 390" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS389 ,Interrupt Targets Non-secure 389" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS388 ,Interrupt Targets Non-secure 388" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS387 ,Interrupt Targets Non-secure 387" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS386 ,Interrupt Targets Non-secure 386" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS385 ,Interrupt Targets Non-secure 385" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS384 ,Interrupt Targets Non-secure 384" "Secure,Non-secure" else hgroup.long 0x3B0++0x03 hide.long 0x00 "NVIC_ITNS12,Interrupt Target Non-Secure Register 12" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x3B4++0x03 line.long 0x00 "NVIC_ITNS13,Interrupt Target Non-Secure Register 13" bitfld.long 0x00 31. " ITNS447 ,Interrupt Targets Non-secure 447" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS446 ,Interrupt Targets Non-secure 446" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS445 ,Interrupt Targets Non-secure 445" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS444 ,Interrupt Targets Non-secure 444" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS443 ,Interrupt Targets Non-secure 443" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS442 ,Interrupt Targets Non-secure 442" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS441 ,Interrupt Targets Non-secure 441" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS440 ,Interrupt Targets Non-secure 440" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS439 ,Interrupt Targets Non-secure 439" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS438 ,Interrupt Targets Non-secure 438" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS437 ,Interrupt Targets Non-secure 437" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS436 ,Interrupt Targets Non-secure 436" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS435 ,Interrupt Targets Non-secure 435" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS434 ,Interrupt Targets Non-secure 434" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS433 ,Interrupt Targets Non-secure 433" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS432 ,Interrupt Targets Non-secure 432" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS431 ,Interrupt Targets Non-secure 431" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS430 ,Interrupt Targets Non-secure 430" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS429 ,Interrupt Targets Non-secure 429" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS428 ,Interrupt Targets Non-secure 428" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS427 ,Interrupt Targets Non-secure 427" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS426 ,Interrupt Targets Non-secure 426" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS425 ,Interrupt Targets Non-secure 425" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS424 ,Interrupt Targets Non-secure 424" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS423 ,Interrupt Targets Non-secure 423" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS422 ,Interrupt Targets Non-secure 422" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS421 ,Interrupt Targets Non-secure 421" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS420 ,Interrupt Targets Non-secure 420" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS419 ,Interrupt Targets Non-secure 419" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS418 ,Interrupt Targets Non-secure 418" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS417 ,Interrupt Targets Non-secure 417" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS416 ,Interrupt Targets Non-secure 416" "Secure,Non-secure" else hgroup.long 0x3B4++0x03 hide.long 0x00 "NVIC_ITNS13,Interrupt Target Non-Secure Register 13" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x3B8++0x03 line.long 0x00 "NVIC_ITNS14,Interrupt Target Non-Secure Register 14" bitfld.long 0x00 31. " ITNS479 ,Interrupt Targets Non-secure 479" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS478 ,Interrupt Targets Non-secure 478" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS477 ,Interrupt Targets Non-secure 477" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS476 ,Interrupt Targets Non-secure 476" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS475 ,Interrupt Targets Non-secure 475" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS474 ,Interrupt Targets Non-secure 474" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS473 ,Interrupt Targets Non-secure 473" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS472 ,Interrupt Targets Non-secure 472" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS471 ,Interrupt Targets Non-secure 471" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS470 ,Interrupt Targets Non-secure 470" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS469 ,Interrupt Targets Non-secure 469" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS468 ,Interrupt Targets Non-secure 468" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS467 ,Interrupt Targets Non-secure 467" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS466 ,Interrupt Targets Non-secure 466" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS465 ,Interrupt Targets Non-secure 465" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS464 ,Interrupt Targets Non-secure 464" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS463 ,Interrupt Targets Non-secure 463" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS462 ,Interrupt Targets Non-secure 462" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS461 ,Interrupt Targets Non-secure 461" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS460 ,Interrupt Targets Non-secure 460" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS459 ,Interrupt Targets Non-secure 459" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS458 ,Interrupt Targets Non-secure 458" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS457 ,Interrupt Targets Non-secure 457" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS456 ,Interrupt Targets Non-secure 456" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS455 ,Interrupt Targets Non-secure 455" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS454 ,Interrupt Targets Non-secure 454" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS453 ,Interrupt Targets Non-secure 453" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS452 ,Interrupt Targets Non-secure 452" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS451 ,Interrupt Targets Non-secure 451" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS450 ,Interrupt Targets Non-secure 450" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS449 ,Interrupt Targets Non-secure 449" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS448 ,Interrupt Targets Non-secure 448" "Secure,Non-secure" else hgroup.long 0x3B8++0x03 hide.long 0x00 "NVIC_ITNS14,Interrupt Target Non-Secure Register 14" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x0F) group.long 0x3BC++0x03 line.long 0x00 "NVIC_ITNS15,Interrupt Target Non-Secure Register 15" bitfld.long 0x00 31. " ITNS511 ,Interrupt Targets Non-secure 511" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS510 ,Interrupt Targets Non-secure 510" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS509 ,Interrupt Targets Non-secure 509" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS508 ,Interrupt Targets Non-secure 508" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS507 ,Interrupt Targets Non-secure 507" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS506 ,Interrupt Targets Non-secure 506" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS505 ,Interrupt Targets Non-secure 505" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS504 ,Interrupt Targets Non-secure 504" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS503 ,Interrupt Targets Non-secure 503" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS502 ,Interrupt Targets Non-secure 502" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS501 ,Interrupt Targets Non-secure 501" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS500 ,Interrupt Targets Non-secure 500" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS499 ,Interrupt Targets Non-secure 499" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS498 ,Interrupt Targets Non-secure 498" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS497 ,Interrupt Targets Non-secure 497" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS496 ,Interrupt Targets Non-secure 496" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS495 ,Interrupt Targets Non-secure 495" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS494 ,Interrupt Targets Non-secure 494" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS493 ,Interrupt Targets Non-secure 493" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS492 ,Interrupt Targets Non-secure 492" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS491 ,Interrupt Targets Non-secure 491" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS490 ,Interrupt Targets Non-secure 490" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS489 ,Interrupt Targets Non-secure 489" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS488 ,Interrupt Targets Non-secure 488" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS487 ,Interrupt Targets Non-secure 487" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS486 ,Interrupt Targets Non-secure 486" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS485 ,Interrupt Targets Non-secure 485" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS484 ,Interrupt Targets Non-secure 484" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS483 ,Interrupt Targets Non-secure 483" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS482 ,Interrupt Targets Non-secure 482" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS481 ,Interrupt Targets Non-secure 481" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS480 ,Interrupt Targets Non-secure 480" "Secure,Non-secure" else hgroup.long 0x3BC++0x03 hide.long 0x00 "NVIC_ITNS15,Interrupt Target Non-Secure Register 15" endif tree.end tree "Interrupt Priority Registers" group.long 0x400++0x1F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x420++0x1F line.long 0x0 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x4 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x8 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0xC "IPR11,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x10 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x14 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x18 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x1C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" else hgroup.long 0x420++0x1F hide.long 0x0 "IPR8,Interrupt Priority Register" hide.long 0x4 "IPR9,Interrupt Priority Register" hide.long 0x8 "IPR10,Interrupt Priority Register" hide.long 0xC "IPR11,Interrupt Priority Register" hide.long 0x10 "IPR12,Interrupt Priority Register" hide.long 0x14 "IPR13,Interrupt Priority Register" hide.long 0x18 "IPR14,Interrupt Priority Register" hide.long 0x1C "IPR15,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x440++0x1F line.long 0x0 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x4 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x8 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0xC "IPR19,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x10 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x14 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x18 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x1C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" else hgroup.long 0x440++0x1F hide.long 0x0 "IPR16,Interrupt Priority Register" hide.long 0x4 "IPR17,Interrupt Priority Register" hide.long 0x8 "IPR18,Interrupt Priority Register" hide.long 0xC "IPR19,Interrupt Priority Register" hide.long 0x10 "IPR20,Interrupt Priority Register" hide.long 0x14 "IPR21,Interrupt Priority Register" hide.long 0x18 "IPR22,Interrupt Priority Register" hide.long 0x1C "IPR23,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x460++0x1F line.long 0x0 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x4 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x8 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0xC "IPR27,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x10 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x14 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x18 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x1C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" else hgroup.long 0x460++0x1F hide.long 0x0 "IPR24,Interrupt Priority Register" hide.long 0x4 "IPR25,Interrupt Priority Register" hide.long 0x8 "IPR26,Interrupt Priority Register" hide.long 0xC "IPR27,Interrupt Priority Register" hide.long 0x10 "IPR28,Interrupt Priority Register" hide.long 0x14 "IPR29,Interrupt Priority Register" hide.long 0x18 "IPR30,Interrupt Priority Register" hide.long 0x1C "IPR31,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x480++0x1F line.long 0x0 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x4 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x8 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0xC "IPR35,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x10 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x14 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x18 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x1C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" else hgroup.long 0x480++0x1F hide.long 0x0 "IPR32,Interrupt Priority Register" hide.long 0x4 "IPR33,Interrupt Priority Register" hide.long 0x8 "IPR34,Interrupt Priority Register" hide.long 0xC "IPR35,Interrupt Priority Register" hide.long 0x10 "IPR36,Interrupt Priority Register" hide.long 0x14 "IPR37,Interrupt Priority Register" hide.long 0x18 "IPR38,Interrupt Priority Register" hide.long 0x1C "IPR39,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x4A0++0x1F line.long 0x0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0x4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0x8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0x10 "IPR44,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0x14 "IPR45,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0x18 "IPR46,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0x1C "IPR47,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" else hgroup.long 0x4A0++0x1F hide.long 0x0 "IPR40,Interrupt Priority Register" hide.long 0x4 "IPR41,Interrupt Priority Register" hide.long 0x8 "IPR42,Interrupt Priority Register" hide.long 0xC "IPR43,Interrupt Priority Register" hide.long 0x10 "IPR44,Interrupt Priority Register" hide.long 0x14 "IPR45,Interrupt Priority Register" hide.long 0x18 "IPR46,Interrupt Priority Register" hide.long 0x1C "IPR47,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x4C0++0x1F line.long 0x0 "IPR48,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority" line.long 0x4 "IPR49,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority" line.long 0x8 "IPR50,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority" line.long 0xC "IPR51,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority" line.long 0x10 "IPR52,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_211 ,Interrupt 211 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_210 ,Interrupt 210 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_209 ,Interrupt 209 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_208 ,Interrupt 208 Priority" line.long 0x14 "IPR53,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_215 ,Interrupt 215 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_214 ,Interrupt 214 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_213 ,Interrupt 213 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_212 ,Interrupt 212 Priority" line.long 0x18 "IPR54,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_219 ,Interrupt 219 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_218 ,Interrupt 218 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_217 ,Interrupt 217 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_216 ,Interrupt 216 Priority" line.long 0x1C "IPR55,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_223 ,Interrupt 223 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_222 ,Interrupt 222 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_221 ,Interrupt 221 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_220 ,Interrupt 220 Priority" else hgroup.long 0x4C0++0x1F hide.long 0x0 "IPR48,Interrupt Priority Register" hide.long 0x4 "IPR49,Interrupt Priority Register" hide.long 0x8 "IPR50,Interrupt Priority Register" hide.long 0xC "IPR51,Interrupt Priority Register" hide.long 0x10 "IPR52,Interrupt Priority Register" hide.long 0x14 "IPR53,Interrupt Priority Register" hide.long 0x18 "IPR54,Interrupt Priority Register" hide.long 0x1C "IPR55,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x4E0++0x1F line.long 0x0 "IPR56,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority" line.long 0x4 "IPR57,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority" line.long 0x8 "IPR58,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority" line.long 0xC "IPR59,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority" line.long 0x10 "IPR60,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_243 ,Interrupt 243 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_242 ,Interrupt 242 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_241 ,Interrupt 241 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_240 ,Interrupt 240 Priority" line.long 0x14 "IPR61,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_247 ,Interrupt 247 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_246 ,Interrupt 246 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_245 ,Interrupt 245 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_244 ,Interrupt 244 Priority" line.long 0x18 "IPR62,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_251 ,Interrupt 251 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_250 ,Interrupt 250 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_249 ,Interrupt 249 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_248 ,Interrupt 248 Priority" line.long 0x1C "IPR63,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_255 ,Interrupt 255 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_254 ,Interrupt 254 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_253 ,Interrupt 253 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_252 ,Interrupt 252 Priority" else hgroup.long 0x4E0++0x1F hide.long 0x0 "IPR56,Interrupt Priority Register" hide.long 0x4 "IPR57,Interrupt Priority Register" hide.long 0x8 "IPR58,Interrupt Priority Register" hide.long 0xC "IPR59,Interrupt Priority Register" hide.long 0x10 "IPR60,Interrupt Priority Register" hide.long 0x14 "IPR61,Interrupt Priority Register" hide.long 0x18 "IPR62,Interrupt Priority Register" hide.long 0x1C "IPR63,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x500++0x1F line.long 0x0 "IPR64,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_259 ,Interrupt 259 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_258 ,Interrupt 258 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_257 ,Interrupt 257 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_256 ,Interrupt 256 Priority" line.long 0x4 "IPR65,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_263 ,Interrupt 263 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_262 ,Interrupt 262 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_261 ,Interrupt 261 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_260 ,Interrupt 260 Priority" line.long 0x8 "IPR66,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_267 ,Interrupt 267 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_266 ,Interrupt 266 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_265 ,Interrupt 265 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_264 ,Interrupt 264 Priority" line.long 0xC "IPR67,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_271 ,Interrupt 271 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_270 ,Interrupt 270 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_269 ,Interrupt 269 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_268 ,Interrupt 268 Priority" line.long 0x10 "IPR68,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_275 ,Interrupt 275 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_274 ,Interrupt 274 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_273 ,Interrupt 273 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_272 ,Interrupt 272 Priority" line.long 0x14 "IPR69,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_279 ,Interrupt 279 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_278 ,Interrupt 278 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_277 ,Interrupt 277 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_276 ,Interrupt 276 Priority" line.long 0x18 "IPR70,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_283 ,Interrupt 283 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_282 ,Interrupt 282 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_281 ,Interrupt 281 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_280 ,Interrupt 280 Priority" line.long 0x1C "IPR71,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_287 ,Interrupt 287 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_286 ,Interrupt 286 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_285 ,Interrupt 285 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_284 ,Interrupt 284 Priority" else hgroup.long 0x500++0x1F hide.long 0x0 "IPR64,Interrupt Priority Register" hide.long 0x4 "IPR65,Interrupt Priority Register" hide.long 0x8 "IPR66,Interrupt Priority Register" hide.long 0xC "IPR67,Interrupt Priority Register" hide.long 0x10 "IPR68,Interrupt Priority Register" hide.long 0x14 "IPR69,Interrupt Priority Register" hide.long 0x18 "IPR70,Interrupt Priority Register" hide.long 0x1C "IPR71,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x520++0x1F line.long 0x0 "IPR72,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_291 ,Interrupt 291 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_290 ,Interrupt 290 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_289 ,Interrupt 289 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_288 ,Interrupt 288 Priority" line.long 0x4 "IPR73,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_295 ,Interrupt 295 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_294 ,Interrupt 294 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_293 ,Interrupt 293 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_292 ,Interrupt 292 Priority" line.long 0x8 "IPR74,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_299 ,Interrupt 299 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_298 ,Interrupt 298 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_297 ,Interrupt 297 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_296 ,Interrupt 296 Priority" line.long 0xC "IPR75,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_303 ,Interrupt 303 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_302 ,Interrupt 302 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_301 ,Interrupt 301 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_300 ,Interrupt 300 Priority" line.long 0x10 "IPR76,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_307 ,Interrupt 307 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_306 ,Interrupt 306 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_305 ,Interrupt 305 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_304 ,Interrupt 304 Priority" line.long 0x14 "IPR77,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_311 ,Interrupt 311 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_310 ,Interrupt 310 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_309 ,Interrupt 309 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_308 ,Interrupt 308 Priority" line.long 0x18 "IPR78,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_315 ,Interrupt 315 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_314 ,Interrupt 314 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_313 ,Interrupt 313 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_312 ,Interrupt 312 Priority" line.long 0x1C "IPR79,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_319 ,Interrupt 319 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_318 ,Interrupt 318 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_317 ,Interrupt 317 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_316 ,Interrupt 316 Priority" else hgroup.long 0x520++0x1F hide.long 0x0 "IPR72,Interrupt Priority Register" hide.long 0x4 "IPR73,Interrupt Priority Register" hide.long 0x8 "IPR74,Interrupt Priority Register" hide.long 0xC "IPR75,Interrupt Priority Register" hide.long 0x10 "IPR76,Interrupt Priority Register" hide.long 0x14 "IPR77,Interrupt Priority Register" hide.long 0x18 "IPR78,Interrupt Priority Register" hide.long 0x1C "IPR79,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x540++0x1F line.long 0x0 "IPR80,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_323 ,Interrupt 323 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_322 ,Interrupt 322 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_321 ,Interrupt 321 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_320 ,Interrupt 320 Priority" line.long 0x4 "IPR81,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_327 ,Interrupt 327 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_326 ,Interrupt 326 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_325 ,Interrupt 325 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_324 ,Interrupt 324 Priority" line.long 0x8 "IPR82,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_331 ,Interrupt 331 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_330 ,Interrupt 330 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_329 ,Interrupt 329 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_328 ,Interrupt 328 Priority" line.long 0xC "IPR83,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_335 ,Interrupt 335 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_334 ,Interrupt 334 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_333 ,Interrupt 333 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_332 ,Interrupt 332 Priority" line.long 0x10 "IPR84,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_339 ,Interrupt 339 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_338 ,Interrupt 338 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_337 ,Interrupt 337 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_336 ,Interrupt 336 Priority" line.long 0x14 "IPR85,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_343 ,Interrupt 343 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_342 ,Interrupt 342 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_341 ,Interrupt 341 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_340 ,Interrupt 340 Priority" line.long 0x18 "IPR86,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_347 ,Interrupt 347 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_346 ,Interrupt 346 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_345 ,Interrupt 345 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_344 ,Interrupt 344 Priority" line.long 0x1C "IPR87,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_351 ,Interrupt 351 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_350 ,Interrupt 350 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_349 ,Interrupt 349 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_348 ,Interrupt 348 Priority" else hgroup.long 0x540++0x1F hide.long 0x0 "IPR80,Interrupt Priority Register" hide.long 0x4 "IPR81,Interrupt Priority Register" hide.long 0x8 "IPR82,Interrupt Priority Register" hide.long 0xC "IPR83,Interrupt Priority Register" hide.long 0x10 "IPR84,Interrupt Priority Register" hide.long 0x14 "IPR85,Interrupt Priority Register" hide.long 0x18 "IPR86,Interrupt Priority Register" hide.long 0x1C "IPR87,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x560++0x1F line.long 0x0 "IPR88,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_355 ,Interrupt 355 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_354 ,Interrupt 354 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_353 ,Interrupt 353 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_352 ,Interrupt 352 Priority" line.long 0x4 "IPR89,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_359 ,Interrupt 359 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_358 ,Interrupt 358 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_357 ,Interrupt 357 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_356 ,Interrupt 356 Priority" line.long 0x8 "IPR90,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_363 ,Interrupt 363 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_362 ,Interrupt 362 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_361 ,Interrupt 361 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_360 ,Interrupt 360 Priority" line.long 0xC "IPR91,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_367 ,Interrupt 367 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_366 ,Interrupt 366 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_365 ,Interrupt 365 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_364 ,Interrupt 364 Priority" line.long 0x10 "IPR92,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_371 ,Interrupt 371 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_370 ,Interrupt 370 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_369 ,Interrupt 369 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_368 ,Interrupt 368 Priority" line.long 0x14 "IPR93,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_375 ,Interrupt 375 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_374 ,Interrupt 374 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_373 ,Interrupt 373 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_372 ,Interrupt 372 Priority" line.long 0x18 "IPR94,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_379 ,Interrupt 379 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_378 ,Interrupt 378 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_377 ,Interrupt 377 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_376 ,Interrupt 376 Priority" line.long 0x1C "IPR95,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_383 ,Interrupt 383 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_382 ,Interrupt 382 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_381 ,Interrupt 381 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_380 ,Interrupt 380 Priority" else hgroup.long 0x560++0x1F hide.long 0x0 "IPR88,Interrupt Priority Register" hide.long 0x4 "IPR89,Interrupt Priority Register" hide.long 0x8 "IPR90,Interrupt Priority Register" hide.long 0xC "IPR91,Interrupt Priority Register" hide.long 0x10 "IPR92,Interrupt Priority Register" hide.long 0x14 "IPR93,Interrupt Priority Register" hide.long 0x18 "IPR94,Interrupt Priority Register" hide.long 0x1C "IPR95,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x580++0x1F line.long 0x0 "IPR96,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_387 ,Interrupt 387 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_386 ,Interrupt 386 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_385 ,Interrupt 385 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_384 ,Interrupt 384 Priority" line.long 0x4 "IPR97,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_391 ,Interrupt 391 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_390 ,Interrupt 390 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_389 ,Interrupt 389 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_388 ,Interrupt 388 Priority" line.long 0x8 "IPR98,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_395 ,Interrupt 395 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_394 ,Interrupt 394 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_393 ,Interrupt 393 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_392 ,Interrupt 392 Priority" line.long 0xC "IPR99,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_399 ,Interrupt 399 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_398 ,Interrupt 398 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_397 ,Interrupt 397 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_396 ,Interrupt 396 Priority" line.long 0x10 "IPR100,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_403 ,Interrupt 403 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_402 ,Interrupt 402 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_401 ,Interrupt 401 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_400 ,Interrupt 400 Priority" line.long 0x14 "IPR101,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_407 ,Interrupt 407 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_406 ,Interrupt 406 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_405 ,Interrupt 405 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_404 ,Interrupt 404 Priority" line.long 0x18 "IPR102,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_411 ,Interrupt 411 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_410 ,Interrupt 410 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_409 ,Interrupt 409 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_408 ,Interrupt 408 Priority" line.long 0x1C "IPR103,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_415 ,Interrupt 415 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_414 ,Interrupt 414 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_413 ,Interrupt 413 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_412 ,Interrupt 412 Priority" else hgroup.long 0x580++0x1F hide.long 0x0 "IPR96,Interrupt Priority Register" hide.long 0x4 "IPR97,Interrupt Priority Register" hide.long 0x8 "IPR98,Interrupt Priority Register" hide.long 0xC "IPR99,Interrupt Priority Register" hide.long 0x10 "IPR100,Interrupt Priority Register" hide.long 0x14 "IPR101,Interrupt Priority Register" hide.long 0x18 "IPR102,Interrupt Priority Register" hide.long 0x1C "IPR103,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x5A0++0x1F line.long 0x0 "IPR104,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_419 ,Interrupt 419 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_418 ,Interrupt 418 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_417 ,Interrupt 417 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_416 ,Interrupt 416 Priority" line.long 0x4 "IPR105,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_423 ,Interrupt 423 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_422 ,Interrupt 422 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_421 ,Interrupt 421 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_420 ,Interrupt 420 Priority" line.long 0x8 "IPR106,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_427 ,Interrupt 427 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_426 ,Interrupt 426 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_425 ,Interrupt 425 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_424 ,Interrupt 424 Priority" line.long 0xC "IPR107,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_431 ,Interrupt 431 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_430 ,Interrupt 430 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_429 ,Interrupt 429 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_428 ,Interrupt 428 Priority" line.long 0x10 "IPR108,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_435 ,Interrupt 435 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_434 ,Interrupt 434 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_433 ,Interrupt 433 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_432 ,Interrupt 432 Priority" line.long 0x14 "IPR109,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_439 ,Interrupt 439 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_438 ,Interrupt 438 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_437 ,Interrupt 437 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_436 ,Interrupt 436 Priority" line.long 0x18 "IPR110,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_443 ,Interrupt 443 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_442 ,Interrupt 442 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_441 ,Interrupt 441 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_440 ,Interrupt 440 Priority" line.long 0x1C "IPR111,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_447 ,Interrupt 447 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_446 ,Interrupt 446 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_445 ,Interrupt 445 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_444 ,Interrupt 444 Priority" else hgroup.long 0x5A0++0x1F hide.long 0x0 "IPR104,Interrupt Priority Register" hide.long 0x4 "IPR105,Interrupt Priority Register" hide.long 0x8 "IPR106,Interrupt Priority Register" hide.long 0xC "IPR107,Interrupt Priority Register" hide.long 0x10 "IPR108,Interrupt Priority Register" hide.long 0x14 "IPR109,Interrupt Priority Register" hide.long 0x18 "IPR110,Interrupt Priority Register" hide.long 0x1C "IPR111,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x5C0++0x1F line.long 0x0 "IPR112,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_451 ,Interrupt 451 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_450 ,Interrupt 450 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_449 ,Interrupt 449 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_448 ,Interrupt 448 Priority" line.long 0x4 "IPR113,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_455 ,Interrupt 455 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_454 ,Interrupt 454 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_453 ,Interrupt 453 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_452 ,Interrupt 452 Priority" line.long 0x8 "IPR114,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_459 ,Interrupt 459 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_458 ,Interrupt 458 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_457 ,Interrupt 457 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_456 ,Interrupt 456 Priority" line.long 0xC "IPR115,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_463 ,Interrupt 463 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_462 ,Interrupt 462 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_461 ,Interrupt 461 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_460 ,Interrupt 460 Priority" line.long 0x10 "IPR116,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_467 ,Interrupt 467 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_466 ,Interrupt 466 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_465 ,Interrupt 465 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_464 ,Interrupt 464 Priority" line.long 0x14 "IPR117,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_471 ,Interrupt 471 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_470 ,Interrupt 470 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_469 ,Interrupt 469 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_468 ,Interrupt 468 Priority" line.long 0x18 "IPR118,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_475 ,Interrupt 475 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_474 ,Interrupt 474 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_473 ,Interrupt 473 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_472 ,Interrupt 472 Priority" line.long 0x1C "IPR119,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_479 ,Interrupt 479 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_478 ,Interrupt 478 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_477 ,Interrupt 477 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_476 ,Interrupt 476 Priority" else hgroup.long 0x5C0++0x1F hide.long 0x0 "IPR112,Interrupt Priority Register" hide.long 0x4 "IPR113,Interrupt Priority Register" hide.long 0x8 "IPR114,Interrupt Priority Register" hide.long 0xC "IPR115,Interrupt Priority Register" hide.long 0x10 "IPR116,Interrupt Priority Register" hide.long 0x14 "IPR117,Interrupt Priority Register" hide.long 0x18 "IPR118,Interrupt Priority Register" hide.long 0x1C "IPR119,Interrupt Priority Register" endif tree.end width 0x0b else newline textline "COREDEBUG component base address not specified" newline endif tree.end sif (CORENAME()=="CORTEXM33F") tree "Floating-point Unit (FPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 8. group.long 0xF34++0x0B line.long 0x00 "FPCCR,Floating-Point Context Control Register" bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled" bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled" bitfld.long 0x00 29. " LSPENS ,This bit controls whether the LSPEN bit is writeable from the Non-secure state" "Writeable,Write ignored" newline bitfld.long 0x00 28. " CLRONRET ,Clear floating point caller saved registers on exception return" "Disabled,Enabled" bitfld.long 0x00 27. " CLRONRETS ,Clear on return Secure only" "Both states,Secure only" bitfld.long 0x00 26. " TS ,Treat as Secure" "Disabled,Enabled" newline bitfld.long 0x00 10. " UFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the UsageFault exception to pending" "Not able,Able" bitfld.long 0x00 9. " SPLIMVIOL ,Indicates whether the FP context violates the stack pointer limit that was active when lazy state preservation was activated" "Low,High" bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able" newline bitfld.long 0x00 7. " SFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the SecureFault exception to pending" "Not able,Able" bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able" bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able" newline bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able" bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread" bitfld.long 0x00 2. " S ,Indicates the FP context belongs to the specified security state" "Non-secure,Secure" newline bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged" bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active" line.long 0x04 "FPCAR,Floating-Point Context Address Register" hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame" line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register" bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative" bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation" bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode" newline bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero" rgroup.long 0xF40++0x0B line.long 0x00 "MVFR0,Media and FP Feature Register 0" bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..." bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..." bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..." newline bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..." bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..." bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..." line.long 0x04 "MVFR1,Media and FP Feature Register 1" bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..." bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..." newline bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..." bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Fully denormalized,?..." line.long 0x08 "MVFR2,Media and FP Feature Register 2" bitfld.long 0x08 4.--7. " VFP_MISC ,Indicates the hardware support for FP miscellaneous features" "Not supported,,,,Supported,?..." width 0xB else newline textline "COREDEBUG component base address not specified" newline endif tree.end endif tree "Debug" tree "Core Debug" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 13. group.long 0xD30++0x03 line.long 0x00 "DFSR,Debug Fault Status Register" eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated" eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered" eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated" newline eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated" eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated" newline hgroup.long 0xDF0++0x03 hide.long 0x00 "DHCSR,Debug Halting Control and Status Register" in newline wgroup.long 0xDF4++0x03 line.long 0x00 "DCRSR,Debug Core Register Selector Register" bitfld.long 0x00 16. " REGWNR ,Specifies the access type for the transfer" "Read,Write" hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register, special-purpose register or Floating-point extension register" group.long 0xDF8++0x03 line.long 0x00 "DCRDR,Debug Core Register Data Register" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000) group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 20. " SDME ,Indicates whether the DebugMonitor targets the Secure or the Non-secure state" "Non-secure,Secure" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 11. " VC_SFERR ,SecureFault vector catch enable" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap on a fault occurring during exception entry or exception return" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception caused by a state information error" "Disabled,Enabled" bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception caused by a checking error" "Disabled,Enabled" newline bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" else group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 20. " SDME ,Indicates whether the DebugMonitor targets the Secure or the Non-secure state" "Non-secure,Secure" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 11. " VC_SFERR ,SecureFault vector catch enable" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap on a fault occurring during exception entry or exception return" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception caused by a state information error" "Disabled,Enabled" bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception caused by a checking error" "Disabled,Enabled" newline bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" endif newline group.long 0xE04++0x07 line.long 0x00 "DAUTHCTRL,Debug Authentication Control Register" bitfld.long 0x00 3. " INTSPNIDEN ,Internal secure non-invasive debug enable" "Disabled,Enabled" bitfld.long 0x00 2. " SPNIDENSEL ,Secure non-invasive debug enable select.Selects between DAUTHCTRL and the IMPLEMENTATION DEFINED external authentication interface for control of Secure non-invasive debug" "Ext. auth. interface,DAUTHCTRL.INTSPNIDEN" bitfld.long 0x00 1. " INTSPIDEN ,Internal secure invasive debug enable" "Disabled,Enabled" bitfld.long 0x00 0. " SPIDENSEL ,Secure invasive debug enable select. Selects between DAUTHCTRL and the IMPLEMENTATION DEFINED external authentication interface for control of Secure invasive debug" "Ext. auth. interface,DAUTHCTRL.INTSPIDEN" line.long 0x04 "DSCSR,Debug Security Control and Status Register" bitfld.long 0x04 16. " CDS ,This field indicates the current security state of the processor" "Non-secure,Secure" bitfld.long 0x04 1. " SBRSEL ,Secure banked register select" "Non-secure,Secure" bitfld.long 0x04 0. " SBRSELEN ,Secure banked register select enable" "Disabled,Enabled" rgroup.long 0xFB8++0x03 line.long 0x00 "DAUTHSTATUS,Debug Authentication Status Register" bitfld.long 0x00 7. " SNI ,Secure non-invasive debug implemented" ",Implemented" bitfld.long 0x00 6. " SNE ,Secure non-invasive debug enabled" "0,1" bitfld.long 0x00 5. " SI ,Secure invasive debug features implemented" ",Implemented" bitfld.long 0x00 4. " SE ,Secure invasive debug enabled" "0,1" newline bitfld.long 0x00 3. " NSNI ,Non-secure non-invasive debug features implemented" ",Implemented" bitfld.long 0x00 2. " NSNE ,Non-secure non-invasive debug enabled" "0,1" bitfld.long 0x00 1. " NSI ,Non-secure invasive debug features implemented" ",Implemented" bitfld.long 0x00 0. " NSE ,Non-secure invasive debug enabled" "0,1" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Flash Patch and Breakpoint Unit (FPB)" sif COMPonent.AVAILABLE("FPB") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1)) width 12. group.long 0x00++0x03 line.long 0x00 "FP_CTRL,Flash Patch Control Register" bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Reserved,Version 2,?..." rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,?..." rbitfld.long 0x00 8.--11. " NUM_LIT ,Number of literal comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 1. " KEY ,Key Field" "Low,High" bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled" textline " " if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x04))&0x20000000)==0x20000000) rgroup.long 0x04++0x03 line.long 0x00 "FP_REMAP,Flash Patch Remap Register" bitfld.long 0x00 29. " RMPSPT ,Indicates whether the FPB unit supports Flash Patch remap" "Not supported,Supported" hexmask.long 0x00 5.--28. 0x20 " REMAP ,Remap address" else rgroup.long 0x04++0x03 line.long 0x00 "FP_REMAP,Flash Patch Remap Register" bitfld.long 0x00 29. " RMPSPT ,Indicates whether the FPB unit supports Flash Patch remap" "Not supported,Supported" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00) group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00) group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00) group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00) group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00) group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00) group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00) group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00) group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif tree "CoreSight Identification Registers" width 12. rgroup.long 0xFCC++0x03 line.long 0x00 "FP_DEVTYPE,FPB CoreSight Device Type Register" hexmask.long.byte 0x00 4.--7. 1. " SUB ,Sub-type" hexmask.long.byte 0x00 0.--3. 1. " MAJOR ,Major type" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xFBC))&0x100000)==0x100000) rgroup.long 0xFBC++0x03 line.long 0x00 "FP_DEVARCH,FPB CoreSight Device Architecture Register" hexmask.long.word 0x00 21.--31. 1. " ARCHITECT ,Component architect" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" bitfld.long 0x00 16.--19. " REVISION ,Architecture revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " ARCHVER ,Architecture version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " ARCHPART ,Architecture part" else rgroup.long 0xFBC++0x03 line.long 0x00 "FP_DEVARCH,FPB CoreSight Device Architecture Register" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" endif rgroup.long 0xFE0++0x0F line.long 0x00 "FP_PIDR0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "FP_PIDR1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "FP_PIDR2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0C "FP_PIDR3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "FP_PIDR4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "FP_CIDR0,Component ID0 (Preamble)" hexmask.long.byte 0x00 0.--7. 1. " PRMBL_0 ,CoreSight component identification preamble" line.long 0x04 "FP_CIDR1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " PRMBL_1 ,CoreSight component class" line.long 0x08 "FP_CIDR2,Component ID2" hexmask.long.byte 0x08 0.--7. 1. " PRMBL_2 ,CoreSight component identification preamble" line.long 0x0c "FP_CIDR3,Component ID3" hexmask.long.byte 0x0C 0.--7. 1. " PRMBL_3 ,CoreSight component identification preamble" tree.end width 0x0b else newline textline "FPB component base address not specified" newline endif tree.end tree "Data Watchpoint and Trace Unit (DWT)" sif COMPonent.AVAILABLE("DWT") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)) width 16. group.long 0x00++0x03 line.long 0x00 "DWT_CTRL,Control Register" rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,?..." rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported" rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported" textline " " rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported" bitfld.long 0x00 23. " CYCDISS ,Controls whether the cycle counter is prevented from incrementing while the PE is in Secure state" "No,Yes" bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled" textline " " bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled" bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled" bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled" bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled" bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " PCSAMPLENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled" bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]" bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]" textline " " bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)))&0x1000000)==0x0000000) group.long 0x04++0x03 line.long 0x00 "DWT_CYCCNT,Cycle Count register" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)))&0x2000000)==0x0000000) group.long 0x08++0x17 line.long 0x00 "DWT_CPICNT,CPI Count register" hexmask.long.byte 0x00 0.--7. 1. " CPICNT ,Base instruction overhead counter" line.long 0x04 "DWT_EXCCNT,Exception Overhead Count Register" hexmask.long.byte 0x04 0.--7. 1. " EXCCNT ,The exception overhead counter" line.long 0x08 "DWT_SLEEPCNT,Sleep Count Register" hexmask.long.byte 0x08 0.--7. 1. " SLEEPCNT ,Sleep Counter" line.long 0x10 "DWT_LSUCNT,LSU Count Register" hexmask.long.byte 0x10 0.--7. 1. " LSUCNT ,Load-store overhead counter" line.long 0x14 "DWT_FOLDCNT,Folded-instruction Count register" hexmask.long.byte 0x14 0.--7. 1. " FOLDCNT ,Folded-instruction counter" endif rgroup.long 0x1C++0x03 line.long 0x00 "DWT_PCSR,Program Counter Sample register" textline " " if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)==0x1) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0x4) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0xC) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0xF) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" endif group.long (0x20+0x08)++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Register 0" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)==0x1) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0x4) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0xC) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0xF) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" endif group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Register 1" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)==0x1) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0x4) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0xC) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0xF) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" endif group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Register 2" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)==0x1) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0x4) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0xC) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0xF) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" endif group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Register 3" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" tree "CoreSight Identification Registers" width 13. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0xFBC))&0x100000)==0x100000) rgroup.long 0xFBC++0x03 line.long 0x00 "DWT_DEVARCH,DWT CoreSight Device Architecture Register" hexmask.long.word 0x00 21.--31. 1. " ARCHITECT ,Component architect" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" bitfld.long 0x00 16.--19. " REVISION ,Architecture revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " ARCHVER ,Architecture version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " ARCHPART ,Architecture part" else rgroup.long 0xFBC++0x03 line.long 0x00 "DWT_DEVARCH,DWT CoreSight Device Architecture Register" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" endif rgroup.long 0xFCC++0x03 line.long 0x00 "DWT_DEVTYPE,Device Type Identifier register" hexmask.long.byte 0x00 4.--7. 1. " SUB ,Sub-type" hexmask.long.byte 0x00 0.--3. 1. " MAJOR ,Major type" rgroup.long 0xFE0++0x0F line.long 0x00 "DWT_PIDR0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "DWT_PIDR1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "DWT_PIDR2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "DWT_PIDR3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "DWT_PIDR4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "DWT_CIDR0,Component ID0 (Preamble)" hexmask.long.byte 0x00 0.--7. 1. " PRMBL_0 ,CoreSight component identification preamble" line.long 0x04 "DWT_CIDR1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " PRMBL_1 ,CoreSight component class" line.long 0x08 "DWT_CIDR2,Component ID2" hexmask.long.byte 0x08 0.--7. 1. " PRMBL_2 ,CoreSight component identification preamble" line.long 0x0c "DWT_CIDR3,Component ID3" hexmask.long.byte 0x0C 0.--7. 1. " PRMBL_3 ,CoreSight component identification preamble" tree.end width 0x0b else newline textline "DWT component base address not specified" newline endif tree.end tree.end AUTOINDENT.POP tree.end elif (CORENAME()=="CORTEXM7F") tree.close "Core Registers (Cortex-M7F)" AUTOINDENT.PUSH AUTOINDENT.OFF tree "System Control" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 12. group.long 0x08++0x03 line.long 0x00 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 28. " DISFPUISSOPT ,DISFPUISSOPT" "No,Yes" bitfld.long 0x00 27. " DISCRITAXIRUW ,Disables critical AXI read-under-write" "No,Yes" bitfld.long 0x00 26. " DISDYNADD ,Disables dynamic allocation of ADD and SUB instructions" "No,Yes" textline " " bitfld.long 0x00 21.--25. " DISISSCH1 ,DISISSCH1" "Normal,Not issued in ch1,,,,,,,,,,,,,,,,,,,,Direct branches,Indirect branches,Loaded to PC,Integer MAC and MUL,VFP,?..." bitfld.long 0x00 16.--20. " DISDI ,DISDI" "Normal,ch1,,,,,,,,,,,,,,,Direct branches,Indirect branches,Loaded to PC,Integer MAC and MUL,VFP,?..." bitfld.long 0x00 15. " DISCRITAXIRUR ,Disables critical AXI read-under-read" "No,Yes" textline " " bitfld.long 0x00 14. " DISBTACALLOC ,DISBTACALLOC" "No,Yes" bitfld.long 0x00 13. " DISBTACREAD ,DISBTACREAD" "No,Yes" bitfld.long 0x00 12. " DISITMATBFLUSH ,Disables ITM and DWT ATB flush" "No,Yes" textline " " bitfld.long 0x00 11. " DISRAMODE ,Disables dynamic read allocate mode for Write-Back Write-Allocate memory regions" "No,Yes" bitfld.long 0x00 10. " FPEXCODIS ,Disables FPU exception outputs" "No,Yes" bitfld.long 0x00 2. " DISFOLD ,Disables dual-issue functionality" "No,Yes" textline "" group.long 0x10++0x03 line.long 0x00 "SYST_CSR,SysTick Control and Status Register" rbitfld.long 0x00 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted" bitfld.long 0x00 2. " CLKSOURCE ,SysTick clock source" "External,Core" bitfld.long 0x00 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick" textline " " bitfld.long 0x00 0. " ENABLE ,Counter Enable" "Disabled,Enabled" group.long 0x14++0x07 line.long 0x00 "SYST_RVR,SysTick Reload Value Register" hexmask.long.tbyte 0x00 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0" line.long 0x04 "SYST_CVR,SysTick Current Value Register" rgroup.long 0x1C++0x03 line.long 0x00 "SYST_CALIB,SysTick Calibration value Register" bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented" bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact" hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing" rgroup.long 0xD00++0x03 line.long 0x00 "CPUID,CPUID Base Register" abitfld.long 0x00 24.--31. " IMPLEMENTER ,Implementer code that Arm has assigned" "0x41=Arm Limited" bitfld.long 0x00 20.--23. " VARIANT ,Variant number to distinguish between different product variants or major revisions of the product" "r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r13,r14,r15" bitfld.long 0x00 16.--19. " ARCHITECTURE ,Indicates the architecture version" "0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,ARMv7-M" newline abitfld.long 0x00 4.--15. " PARTNO ,Indicates part number" "0xC27=Cortex-M7" bitfld.long 0x00 0.--3. " REVISION ,Revision number to distinguish between different patches of the product" "p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15" group.long 0xD04++0x23 line.long 0x00 "ICSR,Interrupt Control and State Register" bitfld.long 0x00 31. " NMIPENDSET ,On writes, makes the NMI exception active. On reads, indicates the state of the exception" "Inactive,Active" setclrfld.long 0x00 28. 0x00 28. 0x00 27. " PENDSVSET ,On writes, sets the PendSV exception as pending. On reads, indicates the current state of the exception" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x00 25. " PENDSTSET ,On writes, sets the SysTick exception as pending. On reads, indicates the current state of the exception" "Not pending,Pending" textline " " rbitfld.long 0x00 23. " ISRPREEMPT ,Indicates whether a pending exception will be serviced on exit from debug halt state" "Disabled,Enabled" rbitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt, generated by the NVIC, is pending" "Not pending,Pending" hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,The exception number of the highest priority pending and enabled interrupt" textline " " rbitfld.long 0x00 11. " RETTOBASE ,Indicates whether there is an active exception other than the exception indicated by the current value of the IPSR" "Present,Absent" hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception" line.long 0x04 "VTOR,Vector Table Offset Register" hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Bits[31:7] of the vector table address" line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register" hexmask.long.word 0x08 16.--31. 1. " VECTKEYSTAT ,Vector Key" rbitfld.long 0x08 15. " ENDIANNESS ,Indicates the memory system endianness" "Little endian,Big endian" bitfld.long 0x08 8.--10. " PRIGROUP ,Priority grouping. Group priority field bits/Subpriority field bits" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" textline " " bitfld.long 0x08 2. " SYSRESETREQ ,System Reset Request" "Not requested,Requested" bitfld.long 0x08 1. " VECTCLRACTIVE ,Writing 1 to this bit clears all active state information for fixed and configurable exceptions" "No effect,Clear" bitfld.long 0x08 0. " VECTRESET ,Writing 1 to this bit causes a local system reset" "No effect,Reset" line.long 0x0C "SCR,System Control Register" bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup" bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep" bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled" line.long 0x10 "CCR,Configuration and Control Register" bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled" bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled" bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled" textline " " bitfld.long 0x10 9. " STKALIGN ,Determines whether the exception entry sequence guarantees 8-byte stack frame alignment, adjusting the SP if necessary before saving state" "4-byte/no adjustment,8-byte/adjustment" bitfld.long 0x10 8. " BFHFNMIGN ,Determines the effect of precise data access faults on handlers running at priority -1 or priority -2" "Lockup,Ignored" bitfld.long 0x10 4. " DIV_0_TRP ,Controls the trap on divide by 0" "Disabled,Enabled" textline " " bitfld.long 0x10 3. " UNALIGN_TRP ,Controls the trapping of unaligned word or halfword accesses" "Disabled,Enabled" bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Disabled,Enabled" bitfld.long 0x10 0. " NONBASETHRDENA ,Controls whether the processor can enter Thread mode at an execution priority level other than base level" "Disabled,Enabled" line.long 0x14 "SHPR1,SSystem Handler Priority Register 1" hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of System Handler 7" hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6(UsageFault)" hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5(BusFault)" textline " " hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4(MemManage)" line.long 0x18 "SHPR2,System Handler Priority Register 2" hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11(SVCall)" hexmask.long.byte 0x18 16.--23. 1. " PRI_10 ,Priority of System Handler 10" hexmask.long.byte 0x18 8.--15. 1. " PRI_9 ,Priority of System Handler 9" textline " " hexmask.long.byte 0x18 0.--7. 1. " PRI_8 ,Priority of System Handler 8" line.long 0x1C "SHPR3,System Handler Priority Register 3" hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of System Handler 15(SysTick)" hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of System Handler 14(PendSV)" hexmask.long.byte 0x1C 8.--15. 1. " PRI_13 ,Priority of System Handler 13" textline " " hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of System Handler 12(DebugMonitor)" line.long 0x20 "SHCSR,System Handler Control and State Register" bitfld.long 0x20 18. " USGFAULTENA ,UsageFault" "Disabled,Enabled" bitfld.long 0x20 17. " BUSFAULTENA ,BusFault" "Disabled,Enabled" bitfld.long 0x20 16. " MEMFAULTENA ,MemManage" "Disabled,Enabled" textline " " bitfld.long 0x20 15. " SVCALLPENDED ,SVCall status" "Not pending,Pending" bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault status" "Not pending,Pending" bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage status" "Not pending,Pending" textline " " bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault status" "Not pending,Pending" bitfld.long 0x20 11. " SYSTICKACT ,SysTick status" "Not active,Active" bitfld.long 0x20 10. " PENDSVACT ,PendSV status" "Not active,Active" textline " " bitfld.long 0x20 8. " MONITORACT ,Monitor status" "Not active,Active" bitfld.long 0x20 7. " SVCALLACT ,SVCall status" "Not active,Active" bitfld.long 0x20 3. " USGFAULTACT ,UsageFault status" "Not active,Active" textline " " bitfld.long 0x20 1. " BUSFAULTACT ,BusFault status" "Not active,Active" bitfld.long 0x20 0. " MEMFAULTACT ,MemManage status" "Not active,Active" group.byte 0xD28++0x1 line.byte 0x00 "MMFSR,MemManage Status Register" bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x00 4. " MSTKERR ,tacking Access Violations" "Not occurred,Occurred" textline " " bitfld.byte 0x00 3. " MUNSTKERR ,Unstack Access Violations" "Not occurred,Occurred" bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred" bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred" line.byte 0x01 "BFSR,Bus Fault Status Register" bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x01 4. " STKERR ,Derived bus fault(exception entry)" "Not occurred,Occurred" textline " " bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault(exception return)" "Not occurred,Occurred" bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred" bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred" textline " " bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred" group.word 0xD2A++0x1 line.word 0x00 "USAFAULT,Usage Fault Status Register" bitfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error" bitfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error" bitfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error" textline " " bitfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error" bitfld.word 0x00 1. " INVSTATE ,Invalid Combination of EPSR and Instruction" "No error,Error" bitfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error" group.long 0xD2C++0x13 line.long 0x00 "HFSR,HardFault Status Register" eventfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred" eventfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority has been escalated to a HardFault exception" "Not occurred,Occurred" eventfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred" line.long 0x04 "DFSR,Debug Fault Status Register" eventfld.long 0x04 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not occurred,Occurred" eventfld.long 0x04 3. " VCATCH ,Indicates triggering of a Vector catch" "Not occurred,Occurred" eventfld.long 0x04 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not occurred,Occurred" textline " " eventfld.long 0x04 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not occurred,Occurred" eventfld.long 0x04 0. " HALTED ,Indicates a debug event generated by a C_HALT or C_STEP request or a step request triggered by setting DEMCR.MON_STEP to 1" "Not occurred,Occurred" line.long 0x08 "MMFAR,MemManage Fault Address Register" line.long 0x0C "BFAR,BusFault Address Register" line.long 0x10 "AFSR,Auxiliary Fault Status Register" group.long 0xD88++0x03 line.long 0x00 "CPACR,Coprocessor Access Control Register" bitfld.long 0x00 22.--23. " CP11 ,Access privileges for coprocessor 11" "Denied,Privileged,,Full" bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Denied,Privileged,,Full" bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Denied,Privileged,,Full" bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Denied,Privileged,,Full" bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Denied,Privileged,,Full" bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Denied,Privileged,,Full" bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Denied,Privileged,,Full" wgroup.long 0xF00++0x03 line.long 0x00 "STIR,Software Triggered Interrupt Register" hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be triggered" tree "Memory System" width 10. rgroup.long 0xD78++0x0B line.long 0x00 "CLIDR,Cache Level ID Register" bitfld.long 0x00 27.--29. " LOU ,Level of Unification" "Level 1,level 2,?..." bitfld.long 0x00 24.--26. " LOC ,Level of Coherency" "Level 1,level 2,?..." bitfld.long 0x00 18.--20. " CL7 ,Cache type field level 7" "No cache,?..." textline " " bitfld.long 0x00 15.--17. " CL6 ,Cache type field level 6" "No cache,?..." bitfld.long 0x00 12.--14. " CL5 ,Cache type field level 5" "No cache,?..." bitfld.long 0x00 9.--11. " CL4 ,Cache type field level 4" "No cache,?..." textline " " bitfld.long 0x00 6.--8. " CL3 ,Cache type field level 3" "No cache,?..." bitfld.long 0x00 3.--5. " CL2 ,Cache type field level 2" "No cache,?..." bitfld.long 0x00 0.--2. " CL1 ,Cache type field level 1" "No cache,Instr. only,Data only,Data and Instr.,?..." line.long 0x04 "CTR,Cache Type Register" bitfld.long 0x04 29.--31. " FORMAT ,Indicates the implemented CTR format" ",,,,ARMv7,?..." bitfld.long 0x04 24.--27. " CWG ,Cache Write-back Granule" "0,1,2,3,4,5,6,7,8,9,?..." bitfld.long 0x04 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,?..." textline " " bitfld.long 0x04 16.--19. " DMINLINE ,Log 2 of the number of words in the smallest cache line of all the data caches and unified caches that are controlled by the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " IMINLINE ,Log 2 of the number of words in the smallest cache line of all the instruction caches that are controlled by the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "CCSIDR,Cache Size ID Register" bitfld.long 0x08 31. " WT ,Indicates support available for Write-Through" "Not supported,Supported" bitfld.long 0x08 30. " WB ,Indicates support available for Write-Back" "Not supported,Supported" bitfld.long 0x08 29. " RA ,Indicates support available for read allocation" "Not supported,Supported" textline " " bitfld.long 0x08 28. " WA ,Indicates support available for write allocation" "Not supported,Supported" hexmask.long.word 0x08 13.--27. 1. " NUMSETS ,Indicates the number of sets as (number of sets) - 1" hexmask.long.word 0x08 3.--12. 1. " ASSOCIATIVITY ,Indicates the number of ways as (number of ways) - 1" textline " " bitfld.long 0x08 0.--2. " LINESIZE ,Indicates the number of words in each cache line" "4,8,16,32,64,128,256,512" group.long 0xD84++0x03 line.long 0x00 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. " LEVEL ,Identifies which cache level to select" "Level 1,?..." bitfld.long 0x00 0. " IND ,Identifies instruction or data cache to use" "Data,Instruction" wgroup.long 0xF50++0x03 line.long 0x00 "ICIALLU,Instruction cache invalidate all to Point of Unification" wgroup.long 0xF58++0x1F line.long 0x00 "ICIMVAU,Instruction cache invalidate by address to PoU" line.long 0x04 "DCIMVAC,Data cache invalidate by address to Point of Coherency (PoC)" line.long 0x08 "DCISW,Data cache invalidate by set/way" line.long 0x0C "DCCMVAU,Data cache by address to PoU" line.long 0x10 "DCCMVAC,Data cache clean by address to PoC" line.long 0x14 "DCCSW,Data cache clean by set/way" line.long 0x18 "DCCIMVAC,Data cache clean and invalidate by address to PoC" line.long 0x1C "DCCISW,Data cache clean and invalidate by set/way" group.long 0xF90++0x13 line.long 0x00 "ITCMCR,Instruction Tightly-Coupled Memory Control Register" bitfld.long 0x00 3.--6. " SZ ,TCM size" "Not implemented,,,4 KB,8 KB,16 KB,32 KB,64 KB,128 KB,256 KB,512 KB,1 MB,2 MB,4 MB,8 MB,16 MB" bitfld.long 0x00 2. " RETEN ,Retry phase enable" "Disabled,Enabled" bitfld.long 0x00 1. " RMW ,Read-Modify-Write enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " EN ,TCM enable" "Disabled,Enabled" line.long 0x04 "DTCMCR,Data Tightly-Coupled Memory Control Register" bitfld.long 0x04 3.--6. " SZ ,TCM size" "Not implemented,,,4 KB,8 KB,16 KB,32 KB,64 KB,128 KB,256 KB,512 KB,1 MB,2 MB,4 MB,8 MB,16 MB" bitfld.long 0x04 2. " RETEN ,Retry phase enable" "Disabled,Enabled" bitfld.long 0x04 1. " RMW ,Read-Modify-Write enable" "Disabled,Enabled" textline " " bitfld.long 0x04 0. " EN ,TCM enable" "Disabled,Enabled" line.long 0x08 "AHBPCR,AHBP control register" bitfld.long 0x08 1.--3. " SZ ,AHBP size" "AHBP disabled,64 MB,128 MB,256 MB,512 MB,?..." bitfld.long 0x08 0. " EN ,AHBP enable" "Disabled,Enabled" line.long 0x0C "CACR,L1 Cache Control Register" bitfld.long 0x0C 2. " FORCEWT ,Enables Force Write-through in the data cache" "Disabled,Enabled" bitfld.long 0x0C 1. " ECCDIS ,Disables ECC in the instruction and data cache" "No,Yes" bitfld.long 0x0C 0. " SIWT ,Enables limited cache coherency usage" "Disabled,Enabled" line.long 0x10 "AHBSCR,AHB Slave Control Register" bitfld.long 0x10 11.--15. " INITCOUNT ,Fairness counter initialization value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x10 2.--10. 1. " TPRI ,Threshold execution priority for AHBS traffic demotion" bitfld.long 0x10 0.--1. " CTL ,AHBS prioritization control" "AHBS,Software,AHBSCR.INITCOUNT,AHBSPRI" group.long 0xFA8++0x03 line.long 0x00 "ABFSR,Auxiliary Bus Fault Status Register" bitfld.long 0x00 8.--9. " AXIMTYPE ,Indicates the type of fault on the AXIM interface" "OKAY,EXOKAY,SLVERR,DECERR" bitfld.long 0x00 4. " EPPB ,Asynchronous fault on EPPB interface" "Not occurred,Occurred" bitfld.long 0x00 3. " AXIM ,Asynchronous fault on AXIM interface" "Not occurred,Occurred" textline " " bitfld.long 0x00 2. " AHBP ,Asynchronous fault on AHBP interface" "Not occurred,Occurred" bitfld.long 0x00 1. " DTCM ,Asynchronous fault on DTCM interface" "Not occurred,Occurred" bitfld.long 0x00 0. " ITCM ,Asynchronous fault on ITCM interface" "Not occurred,Occurred" group.long 0xFB0++0x03 line.long 0x00 "IEBR0,Instruction Error bank Register 0" bitfld.long 0x00 30.--31. " UD ,User-defined" "0,1,2,3" bitfld.long 0x00 17. " TOE ,Indicates the error type" "Correctable,Non-correctable" bitfld.long 0x00 16. " RB ,Indicates which RAM bank to use" "Tag,Data" textline " " hexmask.long.word 0x00 2.--15. 0x4 " RL ,Indicates the location in instruction cache RAM" bitfld.long 0x00 1. " LOCKED ,Indicates whether the location is locked or not locked" "Not locked,Locked" bitfld.long 0x00 0. " VALID ,Indicates whether the entry is valid or not" "Not valid,Valid" group.long 0xFB4++0x03 line.long 0x00 "IEBR1,Instruction Error bank Register 1" bitfld.long 0x00 30.--31. " UD ,User-defined" "0,1,2,3" bitfld.long 0x00 17. " TOE ,Indicates the error type" "Correctable,Non-correctable" bitfld.long 0x00 16. " RB ,Indicates which RAM bank to use" "Tag,Data" textline " " hexmask.long.word 0x00 2.--15. 0x4 " RL ,Indicates the location in instruction cache RAM" bitfld.long 0x00 1. " LOCKED ,Indicates whether the location is locked or not locked" "Not locked,Locked" bitfld.long 0x00 0. " VALID ,Indicates whether the entry is valid or not" "Not valid,Valid" group.long 0xFB8++0x03 line.long 0x00 "DEBR0,Data Error bank Register 0" bitfld.long 0x00 30.--31. " UD ,User-defined" "0,1,2,3" bitfld.long 0x00 17. " TOE ,Indicates the error type" "Correctable,Non-correctable" bitfld.long 0x00 16. " RB ,Indicates which RAM bank to use" "Tag,Data" textline " " hexmask.long.word 0x00 2.--15. 0x4 " RL ,Indicates the location in instruction cache RAM" bitfld.long 0x00 1. " LOCKED ,Indicates whether the location is locked or not locked" "Not locked,Locked" bitfld.long 0x00 0. " VALID ,Indicates whether the entry is valid or not" "Not valid,Valid" group.long 0xFBC++0x03 line.long 0x00 "DEBR1,Data Error bank Register 1" bitfld.long 0x00 30.--31. " UD ,User-defined" "0,1,2,3" bitfld.long 0x00 17. " TOE ,Indicates the error type" "Correctable,Non-correctable" bitfld.long 0x00 16. " RB ,Indicates which RAM bank to use" "Tag,Data" textline " " hexmask.long.word 0x00 2.--15. 0x4 " RL ,Indicates the location in instruction cache RAM" bitfld.long 0x00 1. " LOCKED ,Indicates whether the location is locked or not locked" "Not locked,Locked" bitfld.long 0x00 0. " VALID ,Indicates whether the entry is valid or not" "Not valid,Valid" tree.end tree "Feature Registers" width 10. rgroup.long 0xD40++0x0B line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 4.--7. " STATE1 ,Thumb instruction set support" ",,,Supported,?..." bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..." line.long 0x04 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..." line.long 0x08 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x08 20.--23. " DBGMOD ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..." hgroup.long 0xD4C++0x03 hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" rgroup.long 0xD50++0x03 line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..." bitfld.long 0x00 16.--19. " TCMSUP ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "Level 1,?..." textline " " bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored" bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..." hgroup.long 0xD54++0x03 hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1" rgroup.long 0xD58++0x03 line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..." rgroup.long 0xD60++0x13 line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0" bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..." bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..." bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..." textline " " bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..." bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..." bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..." line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1" bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..." bitfld.long 0x04 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..." bitfld.long 0x04 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..." textline " " bitfld.long 0x04 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..." line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2" bitfld.long 0x08 24.--27. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..." bitfld.long 0x08 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..." bitfld.long 0x08 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..." textline " " bitfld.long 0x08 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..." bitfld.long 0x08 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..." bitfld.long 0x08 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..." textline " " bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..." line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3" bitfld.long 0x0C 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..." bitfld.long 0x0C 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..." bitfld.long 0x0C 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..." textline " " bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x0C 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..." bitfld.long 0x0C 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..." textline " " bitfld.long 0x0C 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..." line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4" bitfld.long 0x10 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..." bitfld.long 0x10 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x10 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..." textline " " bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..." bitfld.long 0x10 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..." bitfld.long 0x10 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..." tree.end tree "CoreSight Identification Registers" width 6. rgroup.long 0xFE0++0x0F line.long 0x00 "PID0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "PID1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "PID2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0C "PID3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "CID0,Component ID0 (Preamble)" line.long 0x04 "CID1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble" line.long 0x08 "CID2,Component ID2" line.long 0x0C "CID3,Component ID3" tree.end width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Memory Protection Unit (MPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 15. rgroup.long 0xD90++0x03 line.long 0x00 "MPU_TYPE,MPU Type Register" bitfld.long 0x00 16.--23. " IREGION ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..." bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..." bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported" group.long 0xD94++0x03 line.long 0x00 "MPU_CTRL,MPU Control Register" bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled" bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled" bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled" group.long 0xD98++0x03 line.long 0x00 "MPU_RNR,MPU Region Number Register" hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR" tree.close "MPU regions" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0 group.long 0xD9C++0x03 "Region 0" saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 0 (not implemented)" saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1 group.long 0xD9C++0x03 "Region 1" saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 1 (not implemented)" saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2 group.long 0xD9C++0x03 "Region 2" saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 2 (not implemented)" saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3 group.long 0xD9C++0x03 "Region 3" saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 3 (not implemented)" saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4 group.long 0xD9C++0x03 "Region 4" saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 4 (not implemented)" saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5 group.long 0xD9C++0x03 "Region 5" saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 5 (not implemented)" saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6 group.long 0xD9C++0x03 "Region 6" saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 6 (not implemented)" saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7 group.long 0xD9C++0x03 "Region 7" saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 7 (not implemented)" saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8 group.long 0xD9C++0x03 "Region 8" saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 8 (not implemented)" saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9 group.long 0xD9C++0x03 "Region 9" saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 9 (not implemented)" saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA group.long 0xD9C++0x03 "Region 10" saveout 0xD98 %l 0xA line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xA line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 10 (not implemented)" saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB group.long 0xD9C++0x03 "Region 11" saveout 0xD98 %l 0xB line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xB line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 11 (not implemented)" saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC group.long 0xD9C++0x03 "Region 12" saveout 0xD98 %l 0xC line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xC line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 12 (not implemented)" saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD group.long 0xD9C++0x03 "Region 13" saveout 0xD98 %l 0xD line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xD line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 13 (not implemented)" saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE group.long 0xD9C++0x03 "Region 14" saveout 0xD98 %l 0xE line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xE line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 14 (not implemented)" saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF group.long 0xD9C++0x03 "Region 15" saveout 0xD98 %l 0xF line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xF line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 15 (not implemented)" saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15" textline " " textline " " endif tree.end width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Nested Vectored Interrupt Controller (NVIC)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 6. rgroup.long 0x04++0x03 line.long 0x00 "ICTR,Interrupt Controller Type Register" bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..." tree "Interrupt Enable Registers" width 23. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) group.long 0x100++0x03 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) group.long 0x100++0x7 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) group.long 0x100++0x0B line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) group.long 0x100++0x0F line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) group.long 0x100++0x13 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) group.long 0x100++0x17 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) group.long 0x100++0x1B line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) group.long 0x100++0x1F line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x100++0x1F hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register" endif tree.end tree "Interrupt Pending Registers" width 23. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) group.long 0x200++0x03 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) group.long 0x200++0x07 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) group.long 0x200++0x0B line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) group.long 0x200++0x0F line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) group.long 0x200++0x13 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) group.long 0x200++0x17 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) group.long 0x200++0x1B line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) group.long 0x200++0x1F line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x200++0x1F hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register" endif tree.end tree "Interrupt Active Bit Registers" width 9. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) rgroup.long 0x300++0x03 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) rgroup.long 0x300++0x07 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) rgroup.long 0x300++0x0B line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) rgroup.long 0x300++0x0F line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) rgroup.long 0x300++0x13 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) rgroup.long 0x300++0x17 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" line.long 0x14 "ACTIVE6,Active Bit Register 6" bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) rgroup.long 0x300++0x1B line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" line.long 0x14 "ACTIVE6,Active Bit Register 6" bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" line.long 0x18 "ACTIVE7,Active Bit Register 7" bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) rgroup.long 0x300++0x1F line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" line.long 0x14 "ACTIVE6,Active Bit Register 6" bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" line.long 0x18 "ACTIVE7,Active Bit Register 7" bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active" line.long 0x1c "ACTIVE8,Active Bit Register 8" bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x300++0x1F hide.long 0x00 "ACTIVE1,Active Bit Register 1" hide.long 0x04 "ACTIVE2,Active Bit Register 2" hide.long 0x08 "ACTIVE3,Active Bit Register 3" hide.long 0x0c "ACTIVE4,Active Bit Register 4" hide.long 0x10 "ACTIVE5,Active Bit Register 5" hide.long 0x14 "ACTIVE6,Active Bit Register 6" hide.long 0x18 "ACTIVE7,Active Bit Register 7" hide.long 0x1c "ACTIVE8,Active Bit Register 8" endif tree.end tree "Interrupt Priority Registers" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) group.long 0x400++0x1F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) group.long 0x400++0x3F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) group.long 0x400++0x5F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) group.long 0x400++0x7F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) group.long 0x400++0x9F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) group.long 0x400++0xBF line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" line.long 0xA0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0xA4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0xA8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xAC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0xB0 "IPR44,Interrupt Priority Register" hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0xB4 "IPR45,Interrupt Priority Register" hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0xB8 "IPR46,Interrupt Priority Register" hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0xBC "IPR47,Interrupt Priority Register" hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) group.long 0x400++0xDF line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" line.long 0xA0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0xA4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0xA8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xAC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0xB0 "IPR44,Interrupt Priority Register" hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0xB4 "IPR45,Interrupt Priority Register" hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0xB8 "IPR46,Interrupt Priority Register" hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0xBC "IPR47,Interrupt Priority Register" hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" line.long 0xC0 "IPR48,Interrupt Priority Register" hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority" hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority" hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority" hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority" line.long 0xC4 "IPR49,Interrupt Priority Register" hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority" hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority" hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority" hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority" line.long 0xC8 "IPR50,Interrupt Priority Register" hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority" hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority" hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority" hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority" line.long 0xCC "IPR51,Interrupt Priority Register" hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority" hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority" hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority" hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority" line.long 0xD0 "IPR52,Interrupt Priority Register" hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority" hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority" hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority" hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority" line.long 0xD4 "IPR53,Interrupt Priority Register" hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority" hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority" hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority" hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority" line.long 0xD8 "IPR54,Interrupt Priority Register" hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority" hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority" hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority" hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority" line.long 0xDC "IPR55,Interrupt Priority Register" hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority" hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority" hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority" hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) group.long 0x400++0xEF line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" line.long 0xA0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0xA4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0xA8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xAC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0xB0 "IPR44,Interrupt Priority Register" hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0xB4 "IPR45,Interrupt Priority Register" hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0xB8 "IPR46,Interrupt Priority Register" hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0xBC "IPR47,Interrupt Priority Register" hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" line.long 0xC0 "IPR48,Interrupt Priority Register" hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority" hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority" hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority" hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority" line.long 0xC4 "IPR49,Interrupt Priority Register" hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority" hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority" hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority" hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority" line.long 0xC8 "IPR50,Interrupt Priority Register" hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority" hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority" hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority" hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority" line.long 0xCC "IPR51,Interrupt Priority Register" hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority" hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority" hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority" hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority" line.long 0xD0 "IPR52,Interrupt Priority Register" hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority" hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority" hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority" hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority" line.long 0xD4 "IPR53,Interrupt Priority Register" hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority" hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority" hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority" hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority" line.long 0xD8 "IPR54,Interrupt Priority Register" hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority" hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority" hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority" hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority" line.long 0xDC "IPR55,Interrupt Priority Register" hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority" hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority" hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority" hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority" line.long 0xE0 "IPR56,Interrupt Priority Register" hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority" hexmask.long.byte 0xE0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority" hexmask.long.byte 0xE0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority" hexmask.long.byte 0xE0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority" line.long 0xE4 "IPR57,Interrupt Priority Register" hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority" hexmask.long.byte 0xE4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority" hexmask.long.byte 0xE4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority" hexmask.long.byte 0xE4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority" line.long 0xE8 "IPR58,Interrupt Priority Register" hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority" hexmask.long.byte 0xE8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority" hexmask.long.byte 0xE8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority" hexmask.long.byte 0xE8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority" line.long 0xEC "IPR59,Interrupt Priority Register" hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority" hexmask.long.byte 0xEC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority" hexmask.long.byte 0xEC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority" hexmask.long.byte 0xEC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority" else hgroup.long 0x400++0xEF hide.long 0x0 "IPR0,Interrupt Priority Register" hide.long 0x4 "IPR1,Interrupt Priority Register" hide.long 0x8 "IPR2,Interrupt Priority Register" hide.long 0xC "IPR3,Interrupt Priority Register" hide.long 0x10 "IPR4,Interrupt Priority Register" hide.long 0x14 "IPR5,Interrupt Priority Register" hide.long 0x18 "IPR6,Interrupt Priority Register" hide.long 0x1C "IPR7,Interrupt Priority Register" hide.long 0x20 "IPR8,Interrupt Priority Register" hide.long 0x24 "IPR9,Interrupt Priority Register" hide.long 0x28 "IPR10,Interrupt Priority Register" hide.long 0x2C "IPR11,Interrupt Priority Register" hide.long 0x30 "IPR12,Interrupt Priority Register" hide.long 0x34 "IPR13,Interrupt Priority Register" hide.long 0x38 "IPR14,Interrupt Priority Register" hide.long 0x3C "IPR15,Interrupt Priority Register" hide.long 0x40 "IPR16,Interrupt Priority Register" hide.long 0x44 "IPR17,Interrupt Priority Register" hide.long 0x48 "IPR18,Interrupt Priority Register" hide.long 0x4C "IPR19,Interrupt Priority Register" hide.long 0x50 "IPR20,Interrupt Priority Register" hide.long 0x54 "IPR21,Interrupt Priority Register" hide.long 0x58 "IPR22,Interrupt Priority Register" hide.long 0x5C "IPR23,Interrupt Priority Register" hide.long 0x60 "IPR24,Interrupt Priority Register" hide.long 0x64 "IPR25,Interrupt Priority Register" hide.long 0x68 "IPR26,Interrupt Priority Register" hide.long 0x6C "IPR27,Interrupt Priority Register" hide.long 0x70 "IPR28,Interrupt Priority Register" hide.long 0x74 "IPR29,Interrupt Priority Register" hide.long 0x78 "IPR30,Interrupt Priority Register" hide.long 0x7C "IPR31,Interrupt Priority Register" hide.long 0x80 "IPR32,Interrupt Priority Register" hide.long 0x84 "IPR33,Interrupt Priority Register" hide.long 0x88 "IPR34,Interrupt Priority Register" hide.long 0x8C "IPR35,Interrupt Priority Register" hide.long 0x90 "IPR36,Interrupt Priority Register" hide.long 0x94 "IPR37,Interrupt Priority Register" hide.long 0x98 "IPR38,Interrupt Priority Register" hide.long 0x9C "IPR39,Interrupt Priority Register" hide.long 0xA0 "IPR40,Interrupt Priority Register" hide.long 0xA4 "IPR41,Interrupt Priority Register" hide.long 0xA8 "IPR42,Interrupt Priority Register" hide.long 0xAC "IPR43,Interrupt Priority Register" hide.long 0xB0 "IPR44,Interrupt Priority Register" hide.long 0xB4 "IPR45,Interrupt Priority Register" hide.long 0xB8 "IPR46,Interrupt Priority Register" hide.long 0xBC "IPR47,Interrupt Priority Register" hide.long 0xC0 "IPR48,Interrupt Priority Register" hide.long 0xC4 "IPR49,Interrupt Priority Register" hide.long 0xC8 "IPR50,Interrupt Priority Register" hide.long 0xCC "IPR51,Interrupt Priority Register" hide.long 0xD0 "IPR52,Interrupt Priority Register" hide.long 0xD4 "IPR53,Interrupt Priority Register" hide.long 0xD8 "IPR54,Interrupt Priority Register" hide.long 0xDC "IPR55,Interrupt Priority Register" hide.long 0xE0 "IPR56,Interrupt Priority Register" hide.long 0xE4 "IPR57,Interrupt Priority Register" hide.long 0xE8 "IPR58,Interrupt Priority Register" hide.long 0xEC "IPR59,Interrupt Priority Register" endif tree.end width 0x0b else newline textline "COREDEBUG component base address not specified" newline endif tree.end sif CORENAME()=="CORTEXM7F" tree "Floating-point Unit (FPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 8. group.long 0xF34++0x0B line.long 0x00 "FPCCR,Floating-Point Context Control Register" bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled" bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled" bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able" newline bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able" bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able" bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able" newline bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread" bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged" bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active" line.long 0x04 "FPCAR,Floating-Point Context Address Register" hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame" line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register" bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative" bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation" bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode" newline bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero" rgroup.long 0xF40++0x0B line.long 0x00 "MVFR0,Media and FP Feature Register 0" bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..." bitfld.long 0x00 24.--27. " SRTERR ,Indicates the hardware support for FP short vectors" "Not supported,?..." bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..." newline bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..." bitfld.long 0x00 12.--15. " FPEXTRP ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..." bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..." newline bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..." bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..." line.long 0x04 "MVFR1,Media and FP Feature Register 1" bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..." bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..." newline bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..." bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..." line.long 0x08 "MVFR2,Media and FP Feature Register 2" bitfld.long 0x08 4.--7. " VFP_MISC ,Indicates the hardware support for FP miscellaneous features" "Not supported,,,,Supported,?..." width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end endif tree "Debug" tree "Core Debug" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 7. group.long 0xD30++0x03 line.long 0x00 "DFSR,Debug Fault Status Register" eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated" eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered" eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated" newline eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated" eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated" newline hgroup.long 0xDF0++0x03 hide.long 0x00 "DHCSR,Debug Halting Control and Status Register" in newline wgroup.long 0xDF4++0x03 line.long 0x00 "DCRSR,Debug Core Register Selector Register" bitfld.long 0x00 16. " REGWNR ,Specifies the access type for the transfer" "Read,Write" hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register, special-purpose register or Floating-point extension register" group.long 0xDF8++0x03 line.long 0x00 "DCRDR,Debug Core Register Data Register" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000) group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap on a fault occurring during exception entry or exception return" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception caused by a state information error" "Disabled,Enabled" newline bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception caused by a checking error" "Disabled,Enabled" bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" newline bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" else group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap on a fault occurring during exception entry or exception return" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception caused by a state information error" "Disabled,Enabled" newline bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception caused by a checking error" "Disabled,Enabled" bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" newline bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" endif width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Flash Patch and Breakpoint Unit (FPB)" sif COMPonent.AVAILABLE("FPB") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1)) width 10. group.long 0x00++0x03 line.long 0x00 "FP_CTRL,Flash Patch Control Register" bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..." rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127" bitfld.long 0x00 1. " KEY ,Key Field" "Low,High" bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled" newline if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00) group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00) group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00) group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00) group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00) group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00) group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00) group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00) group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif width 6. tree "CoreSight Identification Registers" rgroup.long 0xFE0++0x0F line.long 0x00 "PID0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "PID1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "PID2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "PID3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "CID0,Component ID0 (Preamble)" line.long 0x04 "CID1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble" line.long 0x08 "CID2,Component ID2" line.long 0x0C "CID3,Component ID3" tree.end else newline textline "FPB component base address not specified" newline endif tree.end tree "Data Watchpoint and Trace Unit (DWT)" sif COMPonent.AVAILABLE("DWT") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)) width 15. group.long 0x00++0x1B line.long 0x00 "DWT_CTRL,Control Register" rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported" rbitfld.long 0x00 26. " NOEXTTRIG ,Shows whether the implementation includes external match signals" "Supported,Not supported" newline rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported" rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported" bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled" newline bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled" bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled" bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled" newline bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled" bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled" bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled" newline bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled" bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]" bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]" newline bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled" line.long 0x04 "DWT_CYCCNT,Cycle Count register" line.long 0x08 "DWT_CPICNT,CPI Count register" hexmask.long.byte 0x08 0.--7. 1. " CPICNT ,The base CPI counter" line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register" hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT ,The exception overhead counter" line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register" hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT ,Sleep Counter" line.long 0x14 "DWT_LSUCNT,LSU Count Register" hexmask.long.byte 0x14 0.--7. 1. " LSUCNT ,Load-store counter" line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count register" hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT ,Folded-instruction counter" rgroup.long 0x1C++0x03 line.long 0x00 "DWT_PCSR,Program Counter Sample register" newline group.long 0x20++0x07 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" line.long 0x04 "DWT_MASK0,DWT Mask Registers 0" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20) group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00) group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80) group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" else group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif group.long (0x30)++0x07 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" line.long 0x04 "DWT_MASK1,DWT Mask Registers 1" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20) group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00) group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" else group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif group.long (0x40)++0x07 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" line.long 0x04 "DWT_MASK2,DWT Mask Registers 2" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20) group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00) group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" else group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif group.long (0x50)++0x07 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" line.long 0x04 "DWT_MASK3,DWT Mask Registers 3" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20) group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00) group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" else group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" newline textfld " " bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif width 6. tree "CoreSight Identification Registers" rgroup.long 0xFE0++0x0F line.long 0x00 "PID0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "PID1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "PID2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "PID3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "CID0,Component ID0 (Preamble)" line.long 0x04 "CID1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble" line.long 0x08 "CID2,Component ID2" line.long 0x0c "CID3,Component ID3" tree.end width 0x0B else newline textline "DWT component base address not specified" newline endif tree.end tree.end AUTOINDENT.POP tree.end endif AUTOINDENT.ON CENTER TREE ENUMDELIMITER "," base ad:0x0 tree "ANA (Analog Domain)" base ad:0x0 tree "ANALOG_ADC" base ad:0x44530000 group.long 0x0++0x7 line.long 0x0 "MCR,Main Configuration" bitfld.long 0x0 31. "OWREN,Overwrite enable" "0: Older valid conversion data is not overwritten..,1: Newer conversion result is always overwritten.." bitfld.long 0x0 30. "WLSIDE,Write Left Side" "0: Write right-aligned conversion data (from 11 to 0),1: Write left-aligned conversion data (from 15 to 4)" newline bitfld.long 0x0 29. "MODE,Normal scan mode select" "0: One-Shot Operation mode: configuration for one..,1: Scan Operation mode: configuration for.." bitfld.long 0x0 24. "NSTART,Normal conversion start" "0,1" newline bitfld.long 0x0 20. "JSTART,Start injection conversion" "0,1" bitfld.long 0x0 17. "CTUEN,Cross trigger unit enable" "0: The CTU is disabled and the triggered injected..,1: The CTU is enabled and the triggered injected.." newline bitfld.long 0x0 16. "CTU_MODE,Cross trigger unit mode" "0: CTU control mode is selected,1: CTU trigger mode is selected" bitfld.long 0x0 15. "STCL,Self-testing Configuration Lock" "0: Not locked,1: Locked" newline bitfld.long 0x0 14. "CALSTART,Calibration start" "0: No effect (default return value),1: Start calibration" bitfld.long 0x0 13. "AVGEN,Average enable" "0: Disable,1: Enable (default)" newline bitfld.long 0x0 11.--12. "NRSMPL,Number of averaging samples" "0: 16 samples,1: 32 samples,2: 128 samples,3: 512 samples" bitfld.long 0x0 9.--10. "TSAMP,Sample Time for Calibration" "0: 22 cycles of AD_CLK (default),1: 8 cycles of AD_CLK,2: 16 cycle of AD_CLK,3: 32 cycle of AD_CLK" newline bitfld.long 0x0 8. "ADCLKSE,Analog clock frequency select" "0: AD_CLK frequency is half,1: AD_CLK frequency is equal to bus clock frequency" bitfld.long 0x0 7. "ABORTCHAIN,Abort conversion chain" "0: Chain conversion has been aborted or chain..,1: Abort current chain conversion." newline bitfld.long 0x0 6. "ABORT,Abort Conversion" "0: Channel conversion has been aborted or channel..,1: Abort current channel conversion." bitfld.long 0x0 5. "ACKO,Auto-Clock-Off mode enable" "0: Auto-Clock-Off feature is disabled,1: Auto-Clock-Off feature is enabled" newline bitfld.long 0x0 0. "PWDN,Power-down Enable" "0: When ADC status is in Power-down mode..,1: Request to enter Power-down mode." line.long 0x4 "MSR,Main Status" rbitfld.long 0x4 31. "CALIBRTD,Calibration status" "0: Uncalibrated or calibration unsuccessful,1: Calibrated or calibration successful" eventfld.long 0x4 30. "CALFAIL,Calibration failed" "0: Calibration passed (must be checked with CALBUSY..,1: Calibration failed" newline rbitfld.long 0x4 29. "CALBUSY,Calibration busy" "0: ADC is ready for use,1: ADC is busy in a calibration process" rbitfld.long 0x4 24. "NSTART,Normal conversion status" "0: Normal conversion is not in process,1: Normal conversion is in process" newline rbitfld.long 0x4 23. "JABORT,Injected conversion abort status" "0: Injected conversion has not been aborted,1: Injected conversion has been aborted" rbitfld.long 0x4 20. "JSTART,Injected conversion status" "0: Injected conversion is not in process,1: Injected conversion is in process" newline rbitfld.long 0x4 18. "SELF_TEST_S,Self Test Status" "0: Self-test conversion is not in process,1: Self-test conversion is in process" rbitfld.long 0x4 16. "CTUSTART,CTU Conversion Status" "0,1" newline hexmask.long.byte 0x4 9.--15. 1. "CHADDR,Channel address" rbitfld.long 0x4 5. "ACKO,Auto-Clock-Off enable" "0: Auto-Clock-Off feature is not enabled,1: Auto-Clock-Off feature is enabled" newline rbitfld.long 0x4 0.--2. "ADCSTATUS,ADC status" "0,1,2,3,4,5,6,7" group.long 0x10++0xB line.long 0x0 "ISR,Interrupt Status" eventfld.long 0x0 4. "EOCTU,End of CTU conversion" "0: CTU end of conversion has not occurred,1: CTU end of conversion has occurred" eventfld.long 0x0 3. "JEOC,Injected channel end of conversion" "0: Injected channel end of conversion has not..,1: Injected channel end of conversion has occurred" newline eventfld.long 0x0 2. "JECH,Injected end of conversion chain" "0: Injected channel end of conversion chain has not..,1: Injected channel end of conversion chain has.." eventfld.long 0x0 1. "EOC,End of channel conversion" "0: Channel end of conversion has not occurred,1: Channel end of conversion has occurred" newline eventfld.long 0x0 0. "ECH,End of conversion chain" "0: End of conversion chain has not occurred,1: End of conversion chain has occurred" line.long 0x4 "CEOCFR0,Channel Pending 0" eventfld.long 0x4 7. "EOC_CH7,Channel 7 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x4 6. "EOC_CH6,Channel 6 EOC Status" "0: Conversion not complete,1: Conversion complete" newline eventfld.long 0x4 5. "EOC_CH5,Channel 5 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x4 4. "EOC_CH4,Channel 4 EOC Status" "0: Conversion not complete,1: Conversion complete" newline eventfld.long 0x4 3. "EOC_CH3,Channel 3 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x4 2. "EOC_CH2,Channel 2 EOC Status" "0: Conversion not complete,1: Conversion complete" newline eventfld.long 0x4 1. "EOC_CH1,Channel 1 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x4 0. "EOC_CH0,Channel 0 EOC Status" "0: Conversion not complete,1: Conversion complete" line.long 0x8 "CEOCFR1,Channel Pending 1" eventfld.long 0x8 7. "EOC_CH39,Channel 39 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x8 6. "EOC_CH38,Channel 38 EOC Status" "0: Conversion not complete,1: Conversion complete" newline eventfld.long 0x8 5. "EOC_CH37,Channel 37 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x8 4. "EOC_CH36,Channel 36 EOC Status" "0: Conversion not complete,1: Conversion complete" newline eventfld.long 0x8 3. "EOC_CH35,Channel 35 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x8 2. "EOC_CH34,Channel 34 EOC Status" "0: Conversion not complete,1: Conversion complete" newline eventfld.long 0x8 1. "EOC_CH33,Channel 33 EOC Status" "0: Conversion not complete,1: Conversion complete" eventfld.long 0x8 0. "EOC_CH32,Channel 32 EOC Status" "0: Conversion not complete,1: Conversion complete" group.long 0x20++0xB line.long 0x0 "IMR,Interrupt Mask" bitfld.long 0x0 4. "MSKEOCTU,End of CTU conversion interrupt mask" "0: EOCTU interrupt disabled,1: EOCTU interrupt enabled" bitfld.long 0x0 3. "MSKJEOC,End of injected conversion interrupt mask" "0: End of injected conversion interrupt disabled,1: End of injected conversion interrupt enabled" newline bitfld.long 0x0 2. "MSKJECH,End of injected chain conversion interrupt mask" "0: End of injected chain conversion interrupt..,1: End of injected chain conversion interrupt enabled" bitfld.long 0x0 1. "MSKEOC,End of conversion interrupt mask" "0: End of conversion interrupt disabled,1: End of conversion interrupt enabled" newline bitfld.long 0x0 0. "MSKECH,End of chain conversion interrupt mask" "0: End of chain conversion interrupt disabled,1: End of chain conversion interrupt enabled" line.long 0x4 "CIMR0,Channel Interrupt Mask 0" bitfld.long 0x4 7. "CIM7,Channel 7 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 6. "CIM6,Channel 6 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 5. "CIM5,Channel 5 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 4. "CIM4,Channel 4 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 3. "CIM3,Channel 3 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 2. "CIM2,Channel 2 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 1. "CIM1,Channel 1 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 0. "CIM0,Channel 0 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x8 "CIMR1,Channel Interrupt Mask 1" bitfld.long 0x8 7. "CIM39,Channel 39 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x8 6. "CIM38,Channel 38 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x8 5. "CIM37,Channel 37 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x8 4. "CIM36,Channel 36 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x8 3. "CIM35,Channel 35 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x8 2. "CIM34,Channel 34 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x8 1. "CIM33,Channel 33 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x8 0. "CIM32,Channel 32 Interrupt Enable" "0: Interrupt disabled,1: Interrupt enabled" group.long 0x30++0x7 line.long 0x0 "WTISR,Watchdog Threshold Interrupt Status" eventfld.long 0x0 15. "WDG7H,Channel 7 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 14. "WDG7L,Channel 7 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 13. "WDG6H,Channel 6 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 12. "WDG6L,Channel 6 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 11. "WDG5H,Channel 5 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 10. "WDG5L,Channel 5 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 9. "WDG4H,Channel 4 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 8. "WDG4L,Channel 4 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 7. "WDG3H,Channel 3 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 6. "WDG3L,Channel 3 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 5. "WDG2H,Channel 2 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 4. "WDG2L,Channel 2 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 3. "WDG1H,Channel 1 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 2. "WDG1L,Channel 1 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" newline eventfld.long 0x0 1. "WDG0H,Channel 0 Watchdog High Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" eventfld.long 0x0 0. "WDG0L,Channel 0 Watchdog Low Threshold Interrupt" "0: Interrupt not asserted,1: Interrupt asserted" line.long 0x4 "WTIMR,Watchdog Threshold Interrupt Mask" bitfld.long 0x4 15. "MSKWDG7H,Channel 7 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 14. "MSKWDG7L,Channel 7 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 13. "MSKWDG6H,Channel 6 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 12. "MSKWDG6L,Channel 6 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 11. "MSKWDG5H,Channel 5 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 10. "MSKWDG5L,Channel 5 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 9. "MSKWDG4H,Channel 4 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 8. "MSKWDG4L,Channel 4 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 7. "MSKWDG3H,Channel 3 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 6. "MSKWDG3L,Channel 3 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 5. "MSKWDG2H,Channel 2 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 4. "MSKWDG2L,Channel 2 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 3. "MSKWDG1H,Channel 1 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 2. "MSKWDG1L,Channel 1 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x4 1. "MSKWDG0H,Channel 0 Watchdog High Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x4 0. "MSKWDG0L,Channel 0 Watchdog Low Threshold Interrupt Mask" "0: Interrupt is disabled,1: Interrupt is enabled" group.long 0x40++0xB line.long 0x0 "DMAE,DMAE" bitfld.long 0x0 1. "DCLR,DMA Clear Eequence Enable" "0: DMA request cleared by acknowledge from DMA..,1: DMA request cleared on read of data registers" bitfld.long 0x0 0. "DMAEN,DMA Global Enable" "0: DMA feature is disabled,1: DMA feature is enabled" line.long 0x4 "DMAR0,DMA 0" bitfld.long 0x4 7. "DMA7,Channel 7 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x4 6. "DMA6,Channel 6 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" newline bitfld.long 0x4 5. "DMA5,Channel 5 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x4 4. "DMA4,Channel 4 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" newline bitfld.long 0x4 3. "DMA3,Channel 3 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x4 2. "DMA2,Channel 2 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" newline bitfld.long 0x4 1. "DMA1,Channel 1 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x4 0. "DMA0,Channel 0 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" line.long 0x8 "DMAR1,DMA 1" bitfld.long 0x8 7. "DMA39,Channel 39 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x8 6. "DMA38,Channel 38 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" newline bitfld.long 0x8 5. "DMA37,Channel 37 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x8 4. "DMA36,Channel 36 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" newline bitfld.long 0x8 3. "DMA35,Channel 35 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x8 2. "DMA34,Channel 34 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" newline bitfld.long 0x8 1. "DMA33,Channel 33 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" bitfld.long 0x8 0. "DMA32,Channel 32 DMA Enable" "0: Transfer of data in DMA mode is disabled,1: Transfer of data in DMA mode is enabled" group.long 0x60++0xF line.long 0x0 "THRHLR0,Analog Watchdog Threshold 0" hexmask.long.word 0x0 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0x0 0.--11. 1. "THRL,Low Threshold" line.long 0x4 "THRHLR1,Analog Watchdog Threshold 1" hexmask.long.word 0x4 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0x4 0.--11. 1. "THRL,Low Threshold" line.long 0x8 "THRHLR2,Analog Watchdog Threshold 2" hexmask.long.word 0x8 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0x8 0.--11. 1. "THRL,Low Threshold" line.long 0xC "THRHLR3,Analog Watchdog Threshold 3" hexmask.long.word 0xC 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0xC 0.--11. 1. "THRL,Low Threshold" group.long 0x80++0xB line.long 0x0 "PSCR,Presampling Control" bitfld.long 0x0 3.--4. "PREVAL1,Internal presampling voltage selection." "0,1,2,3" bitfld.long 0x0 1.--2. "PREVAL0,Internal presampling voltage selection." "0,1,2,3" newline bitfld.long 0x0 0. "PRECONV,Convert Presampled Value If PRECONV is set presampling is followed by the conversion" "0: Presampling is followed by sampling then..,1: Presampling is followed by the conversion." line.long 0x4 "PSR0,Presampling 0" bitfld.long 0x4 7. "PRES7,Presampling Enable for Channel 7" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x4 6. "PRES6,Presampling Enable for Channel 6" "0: Presampling is disabled,1: Presampling is enabled" newline bitfld.long 0x4 5. "PRES5,Presampling Enable for Channel 5" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x4 4. "PRES4,Presampling Enable for Channel 4" "0: Presampling is disabled,1: Presampling is enabled" newline bitfld.long 0x4 3. "PRES3,Presampling Enable for Channel 3" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x4 2. "PRES2,Presampling Enable for Channel 2" "0: Presampling is disabled,1: Presampling is enabled" newline bitfld.long 0x4 1. "PRES1,Presampling Enable for Channel 1" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x4 0. "PRES0,Presampling Enable for Channel 0" "0: Presampling is disabled,1: Presampling is enabled" line.long 0x8 "PSR1,Presampling 1" bitfld.long 0x8 7. "PRES39,Presampling Enable for Channel 39" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x8 6. "PRES38,Presampling Enable for Channel 38" "0: Presampling is disabled,1: Presampling is enabled" newline bitfld.long 0x8 5. "PRES37,Presampling Enable for Channel 37" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x8 4. "PRES36,Presampling Enable for Channel 36" "0: Presampling is disabled,1: Presampling is enabled" newline bitfld.long 0x8 3. "PRES35,Presampling Enable for Channel 35" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x8 2. "PRES34,Presampling Enable for Channel 34" "0: Presampling is disabled,1: Presampling is enabled" newline bitfld.long 0x8 1. "PRES33,Presampling Enable for Channel 33" "0: Presampling is disabled,1: Presampling is enabled" bitfld.long 0x8 0. "PRES32,Presampling Enable for Channel 32" "0: Presampling is disabled,1: Presampling is enabled" group.long 0x94++0x7 line.long 0x0 "CTR0,Conversion Timing 0" hexmask.long.byte 0x0 0.--7. 1. "INPSAMP,Sampling phase duration" line.long 0x4 "CTR1,Conversion Timing 1" hexmask.long.byte 0x4 0.--7. 1. "INPSAMP,Sampling phase duration" group.long 0xA4++0x7 line.long 0x0 "NCMR0,Normal Conversion Mask 0" bitfld.long 0x0 7. "CH7,Normal Conversion Mask for Channel 7" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x0 6. "CH6,Normal Conversion Mask for Channel 6" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" newline bitfld.long 0x0 5. "CH5,Normal Conversion Mask for Channel 5" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x0 4. "CH4,Normal Conversion Mask for Channel 4" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" newline bitfld.long 0x0 3. "CH3,Normal Conversion Mask for Channel 3" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x0 2. "CH2,Normal Conversion Mask for Channel 2" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" newline bitfld.long 0x0 1. "CH1,Normal Conversion Mask for Channel 1" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x0 0. "CH0,Normal Conversion Mask for Channel 0" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" line.long 0x4 "NCMR1,Normal Conversion Mask 1" bitfld.long 0x4 7. "CH39,Normal Conversion Mask for Channel 39" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x4 6. "CH38,Normal Conversion Mask for Channel 38" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" newline bitfld.long 0x4 5. "CH37,Normal Conversion Mask for Channel 37" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x4 4. "CH36,Normal Conversion Mask for Channel 36" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" newline bitfld.long 0x4 3. "CH35,Normal Conversion Mask for Channel 35" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x4 2. "CH34,Normal Conversion Mask for Channel 34" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" newline bitfld.long 0x4 1. "CH33,Normal Conversion Mask for Channel 33" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" bitfld.long 0x4 0. "CH32,Normal Conversion Mask for Channel 32" "0: Normal Conversion is disabled,1: Normal Conversion is enabled" group.long 0xB4++0x7 line.long 0x0 "JCMR0,Injected Conversion Mask 0" bitfld.long 0x0 7. "CH7,Injected Conversion Mask for Channel 7" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x0 6. "CH6,Injected Conversion Mask for Channel 6" "0: Injected conversion is disabled,1: Injected conversion is enabled" newline bitfld.long 0x0 5. "CH5,Injected Conversion Mask for Channel 5" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x0 4. "CH4,Injected Conversion Mask for Channel 4" "0: Injected conversion is disabled,1: Injected conversion is enabled" newline bitfld.long 0x0 3. "CH3,Injected Conversion Mask for Channel 3" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x0 2. "CH2,Injected Conversion Mask for Channel 2" "0: Injected conversion is disabled,1: Injected conversion is enabled" newline bitfld.long 0x0 1. "CH1,Injected Conversion Mask for Channel 1" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x0 0. "CH0,Injected Conversion Mask for Channel 0" "0: Injected conversion is disabled,1: Injected conversion is enabled" line.long 0x4 "JCMR1,Injected Conversion Mask 1" bitfld.long 0x4 7. "CH39,Injected Conversion Mask for Channel 39" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x4 6. "CH38,Injected Conversion Mask for Channel 38" "0: Injected conversion is disabled,1: Injected conversion is enabled" newline bitfld.long 0x4 5. "CH37,Injected Conversion Mask for Channel 37" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x4 4. "CH36,Injected Conversion Mask for Channel 36" "0: Injected conversion is disabled,1: Injected conversion is enabled" newline bitfld.long 0x4 3. "CH35,Injected Conversion Mask for Channel 35" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x4 2. "CH34,Injected Conversion Mask for Channel 34" "0: Injected conversion is disabled,1: Injected conversion is enabled" newline bitfld.long 0x4 1. "CH33,Injected Conversion Mask for Channel 33" "0: Injected conversion is disabled,1: Injected conversion is enabled" bitfld.long 0x4 0. "CH32,Injected Conversion Mask for Channel 32" "0: Injected conversion is disabled,1: Injected conversion is enabled" group.long 0xC0++0x3 line.long 0x0 "USROFSGN,User OFFSET and Gain" hexmask.long.word 0x0 16.--25. 1. "GAINUSER,User-defined gain value" hexmask.long.byte 0x0 0.--7. 1. "OFFSUSER,User defined offset" group.long 0xC8++0x3 line.long 0x0 "PDEDR,Power Down Exit Delay" hexmask.long.byte 0x0 0.--7. 1. "PDED,Power Down Exist Delay" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x100)++0x3 line.long 0x0 "PCDR[$1],Precision Channel n Data" bitfld.long 0x0 19. "VALID,Conversion Data Valid" "0: Not valid data,1: Valid data" bitfld.long 0x0 18. "OVERW,Data Overwrite" "0: Data not overwritten,1: Data overwritten" newline bitfld.long 0x0 16.--17. "RESULT,Mode of Conversion Status" "0: Data is a result of Normal conversion mode,1: Data is a result of Injected conversion mode,2: Data is a result of CTU conversion mode,?" hexmask.long.word 0x0 0.--11. 1. "CDATA,Channel Converted Data" repeat.end group.long 0x280++0xF line.long 0x0 "THRHLR4,Analog Watchdog Threshold 4" hexmask.long.word 0x0 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0x0 0.--11. 1. "THRL,Low Threshold" line.long 0x4 "THRHLR5,Analog Watchdog Threshold 5" hexmask.long.word 0x4 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0x4 0.--11. 1. "THRL,Low Threshold" line.long 0x8 "THRHLR6,Analog Watchdog Threshold 6" hexmask.long.word 0x8 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0x8 0.--11. 1. "THRL,Low Threshold" line.long 0xC "THRHLR7,Analog Watchdog Threshold 7" hexmask.long.word 0xC 16.--27. 1. "THRH,High Threshold" hexmask.long.word 0xC 0.--11. 1. "THRL,Low Threshold" group.long 0x2E0++0x7 line.long 0x0 "CWENR0,Channel Watchdog Enable 0" bitfld.long 0x0 7. "CWEN7,Watchdog Enable for Channel 7" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x0 6. "CWEN6,Watchdog Enable for Channel 6" "0: Watchdog is disabled,1: Watchdog is enabled" newline bitfld.long 0x0 5. "CWEN5,Watchdog Enable for Channel 5" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x0 4. "CWEN4,Watchdog Enable for Channel 4" "0: Watchdog is disabled,1: Watchdog is enabled" newline bitfld.long 0x0 3. "CWEN3,Watchdog Enable for Channel 3" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x0 2. "CWEN2,Watchdog Enable for Channel 2" "0: Watchdog is disabled,1: Watchdog is enabled" newline bitfld.long 0x0 1. "CWEN1,Watchdog Enable for Channel 1" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x0 0. "CWEN0,Watchdog Enable for Channel 0" "0: Watchdog is disabled,1: Watchdog is enabled" line.long 0x4 "CWENR1,Channel Watchdog Enable 1" bitfld.long 0x4 7. "CWEN39,Watchdog Enable for Channel 39" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x4 6. "CWEN38,Watchdog Enable for Channel 38" "0: Watchdog is disabled,1: Watchdog is enabled" newline bitfld.long 0x4 5. "CWEN37,Watchdog Enable for Channel 37" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x4 4. "CWEN36,Watchdog Enable for Channel 36" "0: Watchdog is disabled,1: Watchdog is enabled" newline bitfld.long 0x4 3. "CWEN35,Watchdog Enable for Channel 35" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x4 2. "CWEN34,Watchdog Enable for Channel 34" "0: Watchdog is disabled,1: Watchdog is enabled" newline bitfld.long 0x4 1. "CWEN33,Watchdog Enable for Channel 33" "0: Watchdog is disabled,1: Watchdog is enabled" bitfld.long 0x4 0. "CWEN32,Watchdog Enable for Channel 32" "0: Watchdog is disabled,1: Watchdog is enabled" group.long 0x2F0++0x7 line.long 0x0 "AWORR0,Analog Watchdog Out of Range 0" eventfld.long 0x0 7. "AWOR_CH7,Analog Watchdog Out of Range for Channel 7" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x0 6. "AWOR_CH6,Analog Watchdog Out of Range for Channel 6" "0: Converted data is in range,1: Converted data is out of range" newline eventfld.long 0x0 5. "AWOR_CH5,Analog Watchdog Out of Range for Channel 5" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x0 4. "AWOR_CH4,Analog Watchdog Out of Range for Channel 4" "0: Converted data is in range,1: Converted data is out of range" newline eventfld.long 0x0 3. "AWOR_CH3,Analog Watchdog Out of Range for Channel 3" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x0 2. "AWOR_CH2,Analog Watchdog Out of Range for Channel 2" "0: Converted data is in range,1: Converted data is out of range" newline eventfld.long 0x0 1. "AWOR_CH1,Analog Watchdog Out of Range for Channel 1" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x0 0. "AWOR_CH0,Analog Watchdog Out of Range for Channel 0" "0: Converted data is in range,1: Converted data is out of range" line.long 0x4 "AWORR1,Analog Watchdog Out of Range 1" eventfld.long 0x4 7. "AWOR_CH39,Analog Watchdog Out of Range for Channel 39" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x4 6. "AWOR_CH38,Analog Watchdog Out of Range for Channel 38" "0: Converted data is in range,1: Converted data is out of range" newline eventfld.long 0x4 5. "AWOR_CH37,Analog Watchdog Out of Range for Channel 37" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x4 4. "AWOR_CH36,Analog Watchdog Out of Range for Channel 36" "0: Converted data is in range,1: Converted data is out of range" newline eventfld.long 0x4 3. "AWOR_CH35,Analog Watchdog Out of Range for Channel 35" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x4 2. "AWOR_CH34,Analog Watchdog Out of Range for Channel 34" "0: Converted data is in range,1: Converted data is out of range" newline eventfld.long 0x4 1. "AWOR_CH33,Analog Watchdog Out of Range for Channel 33" "0: Converted data is in range,1: Converted data is out of range" eventfld.long 0x4 0. "AWOR_CH32,Analog Watchdog Out of Range for Channel 32" "0: Converted data is in range,1: Converted data is out of range" group.long 0x340++0x13 line.long 0x0 "STCR1,Self-Test Configuration 1" hexmask.long.byte 0x0 24.--31. 1. "INPSAMP_C,Sampling Configuration for Algorithm C" hexmask.long.byte 0x0 8.--15. 1. "INPSAMP_S,Sampling Configuration for Algorithm S" line.long 0x4 "STCR2,Self-Test Configuration 2" bitfld.long 0x4 27. "MSKWDSERR,Watchdog sequence error interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 26. "SERR,Error fault injection field (write-only)." "0,1" newline bitfld.long 0x4 25. "MSKWDTERR,Watchdog timer error interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 23. "MSKST_EOC,Self-Test EOC interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 18. "MSKWDG_EOA_C,End of algorithm C interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 16. "MSKWDG_EOA_S,End of algorithm S interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 15. "MSKERR_C,Error on algorithm C channel interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 13. "MSKERR_S2,Error on algorithm S2 channel interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 12. "MSKERR_S1,Error on algorithm S1 channel interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x4 11. "MSKERR_S0,Error on algorithm S0 channel interrupt mask" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x4 7. "EN,Self-testing channel enable" "0: OFF,1: ON" bitfld.long 0x4 4. "FMA_WDSERR,Fault mapping for watchdog sequence error" "0: NCF mapping,1: CF mapping" newline bitfld.long 0x4 3. "FMA_WDTERR,Fault mapping for watchdog timer error" "0: NCF mapping,1: CF mapping" bitfld.long 0x4 2. "FMA_C,Fault mapping for algorithm C" "0: NCF mapping,1: CF mapping" newline bitfld.long 0x4 0. "FMA_S,Fault mapping for BGAP algorithm" "0: Non-Critical Fault (NCF) mapping,1: Critical Fault (CF) mapping" line.long 0x8 "STCR3,Self-Test Configuration 3" bitfld.long 0x8 8.--9. "ALG,Self-test Algorithm Select" "0,1,2,3" hexmask.long.byte 0x8 0.--4. 1. "MSTEP,Self-Test Step Select" line.long 0xC "STBRR,Self-Test Baud Rate" bitfld.long 0xC 16.--18. "WDT,Watchdog Timer Value" "0: 0.1 ms ((0008h * Prescaler) cycles at 80 MHz),1: 0.5 ms ((0027h * Prescaler) cycles at 80 MHz),2: 1 ms ((004Eh * Prescaler) cycles at 80 MHz),3: 2 ms ((009Ch * Prescaler) cycles at 80 MHz),4: 5 ms ((0187h * Prescaler) cycles at 80 MHz),5: 10 ms ((030Dh * Prescaler) cycles at 80 MHz),6: 20 ms (061Ah * Prescaler) cycles at 80 MHz),7: 50 ms (0F42h *Prescaler) cycles at 80 MHz)" hexmask.long.byte 0xC 0.--7. 1. "BR,Algorithm Baud Rate" line.long 0x10 "STSR1,Self-Test Status 1" eventfld.long 0x10 27. "WDSERR,Watchdog Sequence Errors" "0: No failure,1: Failure occurred" eventfld.long 0x10 25. "WDTERR,Watchdog Timer Error" "0: No failure,1: Failure occurred" newline eventfld.long 0x10 24. "OVERWR,Overwrite Error" "0: No overwrite error,1: Overwrite error occurred" eventfld.long 0x10 23. "ST_EOC,Self-test EOC" "0: Self-test end of conversion is not complete,1: Self-test end of conversion is complete" newline eventfld.long 0x10 18. "WDG_EOA_C,Watchdog End of Algorithm C" "0: Self-test end of Algorithm C conversion is not..,1: Self-test end of Algorithm C conversion is.." eventfld.long 0x10 16. "WDG_EOA_S,Watchdog End of Algorithm S" "0: Self-test end of Algorithm S conversion is not..,1: Self-test end of Algorithm S conversion is.." newline eventfld.long 0x10 15. "ERR_C,Algorithm C Error" "0: No Algorithm C error,1: Algorithm C error occurred" eventfld.long 0x10 13. "ERR_S2,Algorithm S2 Error" "0: No error occurred on the sampled signal,1: Error occurred on the sampled signal" newline eventfld.long 0x10 12. "ERR_S1,Algorithm S1 Error" "0: No VDD ERROR,1: VDD ERROR occurred" eventfld.long 0x10 11. "ERR_S0,Algorithm S0 Error" "0: No VREF error,1: VREF error occurred" newline hexmask.long.byte 0x10 5.--9. 1. "STEP_C,Algorithm C step number error" rgroup.long 0x354++0xB line.long 0x0 "STSR2,Self-Test Status 2" bitfld.long 0x0 31. "OVFL,Overflow Bit" "0: Not Overflow,1: Overflow" hexmask.long.word 0x0 16.--27. 1. "DATA1,Test channel converted data when the ERR_S1 has occurred" newline hexmask.long.word 0x0 0.--11. 1. "DATA0,Test channel converted data when the ERR_S1 has occurred Algorithm S (step1) >= integer part of the ratio TEST (step1)/TEST (step0) = VDD/VBGAP" line.long 0x4 "STSR3,Self-Test Status 3" hexmask.long.word 0x4 16.--27. 1. "DATA1,Test channel converted data when the ERR_S2 has occurred Algorithm S (step2) >= TEST channel data = VREF/VREF" hexmask.long.word 0x4 0.--11. 1. "DATA0,Test channel converted data when the ERR_S0 has occurred Algorithm S (step0) >= TEST channel data = VBGAP/VREF" line.long 0x8 "STSR4,Self-Test Status 4" hexmask.long.word 0x8 16.--27. 1. "DATA1,Test channel converted data when ERR_C has occurred" rgroup.long 0x370++0x7 line.long 0x0 "STDR1,Self-Test Data 1" bitfld.long 0x0 19. "VALID,Valid data" "0: Data not valid,1: Data valid" bitfld.long 0x0 18. "OWERWR,Overwrite data" "0: Data not overwritten,1: Data overwritten" newline hexmask.long.word 0x0 0.--11. 1. "TCDATA,Test channel converted data" line.long 0x4 "STDR2,Self-Test Data 2" hexmask.long.word 0x4 20.--31. 1. "FDATA,Fractional data" bitfld.long 0x4 19. "VALID,Valid data" "0: Data not valid,1: Data valid" newline bitfld.long 0x4 18. "OVERWR,Overwrite data" "0: Data not overwritten,1: Data overwritten" hexmask.long.word 0x4 0.--11. 1. "IDATA,Integer data" group.long 0x380++0xF line.long 0x0 "STAW0R,Self-Test Analog Watchdog 0" bitfld.long 0x0 31. "AWDE,Analog Watchdog Enable" "0: Disabled,1: Enabled" bitfld.long 0x0 30. "WDTE,Watchdog timer enable (related to the Algorithm S)" "0: Disabled,1: Enabled" newline hexmask.long.word 0x0 16.--27. 1. "THRH,High threshold value for Algorithm S step0" hexmask.long.word 0x0 0.--11. 1. "THRL,Low threshold value for Algorithm S step0" line.long 0x4 "STAW1AR,Self-Test Analog Watchdog 1A" bitfld.long 0x4 31. "AWDE,Analog Watchdog Enable" "0: Disabled,1: Enabled" hexmask.long.word 0x4 16.--27. 1. "THRH,High Threshold Value for Algorithm S Step1" newline hexmask.long.word 0x4 0.--11. 1. "THRL,Low Threshold Value for Algorithm S Step1" line.long 0x8 "STAW1BR,Self-Test Analog Watchdog 1B" hexmask.long.word 0x8 16.--27. 1. "THRH,High Threshold Value for Algorithm S Step1" hexmask.long.word 0x8 0.--11. 1. "THRL,Low Threshold Value for Algorithm S Step1" line.long 0xC "STAW2R,Self-Test Analog Watchdog 2" bitfld.long 0xC 31. "AWDE,Analog Watchdog Enable" "0: Disabled,1: Enabled" hexmask.long.word 0xC 0.--11. 1. "THRL,Threshold level low" rgroup.long 0x390++0x3 line.long 0x0 "STAW3R,Self-Test Analog Watchdog 3" group.long 0x394++0x7 line.long 0x0 "STAW4R,Self-Test Analog Watchdog 4" bitfld.long 0x0 31. "AWDE,Analog watchdog enable (related to Algorithm C)" "0: Disabled,1: Enabled" bitfld.long 0x0 30. "WDTE,Watchdog timer enable (related to Algorithm C)." "0: Disabled,1: Enabled" newline hexmask.long.word 0x0 16.--27. 1. "THRH,High threshold value for step0 of Algorithm C." hexmask.long.word 0x0 0.--11. 1. "THRL,Low threshold value for step0 of Algorithm C." line.long 0x4 "STAW5R,Self-Test Analog Watchdog 5" hexmask.long.word 0x4 16.--27. 1. "THRH,High threshold value for step N of Algorithm C (N = 1 to CS-1)." hexmask.long.word 0x4 0.--11. 1. "THRL,Low threshold value for step0 of Algorithm C." rgroup.long 0x39C++0x3 line.long 0x0 "CALSTAT,Calibration Status" hexmask.long.word 0x0 16.--31. 1. "TEST_RESULT,TEST_RESULT" bitfld.long 0x0 11. "STAT_12,Status of Calibration step 12" "0: Test passed,1: Test failed" newline bitfld.long 0x0 10. "STAT_11,Status of calibration step 11" "0: Test passed,1: Test failed" bitfld.long 0x0 9. "STAT_10,Status of calibration step 10" "0: Test passed,1: Test failed" newline bitfld.long 0x0 8. "STAT_9,Status of calibration step 9" "0: Test passed,1: Test failed" bitfld.long 0x0 7. "STAT_8,Status of calibration step 8" "0: Test passed,1: Test failed" newline bitfld.long 0x0 6. "STAT_7,Status of calibration step 7" "0: Test passed,1: Test failed" bitfld.long 0x0 5. "STAT_6,Status of calibration step 6" "0: Test passed,1: Test failed" newline bitfld.long 0x0 4. "STAT_5,Status of calibration step 5" "0: Test passed,1: Test failed" bitfld.long 0x0 3. "STAT_4,Status of calibration step 4" "0: Test passed,1: Test failed" newline bitfld.long 0x0 2. "STAT_3,Status of calibration step 3" "0: Test passed,1: Test failed" bitfld.long 0x0 1. "STAT_2,Status of calibration step 2" "0: Test passed,1: Test failed" newline bitfld.long 0x0 0. "STAT_1,Status of calibration step 1" "0: Test passed,1: Test failed" tree.end tree "ANALOG_AGDET" base ad:0x44487000 group.long 0x4++0x7 line.long 0x0 "GD_TEST,Glitch Detector Test Register" hexmask.long.byte 0x0 20.--23. 1. "TEST_SEL,Test Mode Item Selection" rbitfld.long 0x0 11. "TEST_POS_DETECTED,Test Positive Glitch Detect Flag" "0: Pos edge is not detected in during self-test,1: Pos edge is detected in during self-test" newline rbitfld.long 0x0 10. "TEST_NEG_DETECTED,Test Negative Glitch Detect Flag" "0: Neg edge is not detected during test,1: Neg edge is detected during test" rbitfld.long 0x0 8. "TEST_DONE,Self-Test Done" "0: Self-test is not done,1: Self-test is done" newline bitfld.long 0x0 0. "TEST_EN,Enable Signal Of Self-Test" "0: Disable glitch detector self-test,1: Enable glitch detector self-test" line.long 0x4 "GD_MISC,Glitch Detector MISC Register" hexmask.long.byte 0x4 24.--31. 1. "glitch_det_trim,Glitch Detector Trim" group.long 0x200++0x3 line.long 0x0 "GD_CTRL,Glitch Detector Control Register" rbitfld.long 0x0 17. "POS_DETECTED,Posedge Detected Flag" "0: Posedge is not detected on vdd_soc,1: Posedge is detected on vdd_soc" rbitfld.long 0x0 16. "NEG_DETECTED,Negedge Detected Flag" "0: Negedge is not detected on vdd_soc,1: Negedge is detected on vdd_soc" newline hexmask.long.byte 0x0 12.--15. 1. "TH_HI_TRIM,Trim Code for Positive Edge Threshold" hexmask.long.byte 0x0 8.--11. 1. "TH_LO_TRIM,Trim Code For Negative Edge Threshold" newline bitfld.long 0x0 1. "RST_LATCH,Reset Glitch Detector Output" "?,1: Write logic 1 to this bit resets the glitch.." bitfld.long 0x0 0. "ENABLE,Enable Signal For Glitch Detector" "0: Glitch detector is disabled,1: Glitch detector is enabled" tree.end tree "ANALOG_CMU" base ad:0x44670000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree "ANALOG_FRACT_PLL" tree "AUDIO_FRACT_PLL1" base ad:0x44481100 group.long 0x0++0x6F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0: Normal mode,1: MULTIPHASE_SDM_DISABLE_MODE" newline bitfld.long 0x0 11. "DITHER_EN3,Dither Enable 3" "0: Normal mode,1: Dither enable for third stage of fractional.." newline bitfld.long 0x0 10. "DITHER_EN2,Dither Enable 2" "0: Normal mode,1: Dither enable for second stage of fractional.." newline bitfld.long 0x0 9. "DITHER_EN1,Dither Enable 1" "0: Normal mode,1: Dither enable for first stage of fractional.." newline bitfld.long 0x0 8. "SPREADCTL,Modulation type selection" "0: Modulation centered around nominal frequency.,1: Modulation spread below nominal frequency." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0x4 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0x4 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0x4 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0x4 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline eventfld.long 0x8 11. "DITHER_EN3,Dither Enable 3" "0,1" newline eventfld.long 0x8 10. "DITHER_EN2,Dither Enable 2" "0,1" newline eventfld.long 0x8 9. "DITHER_EN1,Dither Enable 1" "0,1" newline eventfld.long 0x8 8. "SPREADCTL,Modulation type selection" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0xC 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0xC 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0xC 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0xC 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x30 "SPREAD_SPECTRUM,PLL Spread Spectrum Register" hexmask.long.word 0x30 16.--31. 1. "STOP,Stop" newline bitfld.long 0x30 15. "ENABLE,ENABLE" "0: Disable spread spectrum modulation.,1: Enable spread spectrum modulation." newline hexmask.long.word 0x30 0.--14. 1. "STEP,STEP" line.long 0x34 "SPREAD_SPECTRUM_SET,PLL Spread Spectrum Register" hexmask.long.word 0x34 16.--31. 1. "STOP,Stop" newline bitfld.long 0x34 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "STEP,STEP" line.long 0x38 "SPREAD_SPECTRUM_CLR,PLL Spread Spectrum Register" hexmask.long.word 0x38 16.--31. 1. "STOP,Stop" newline eventfld.long 0x38 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x38 0.--14. 1. "STEP,STEP" line.long 0x3C "SPREAD_SPECTRUM_TOG,PLL Spread Spectrum Register" hexmask.long.word 0x3C 16.--31. 1. "STOP,Stop" newline bitfld.long 0x3C 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x3C 0.--14. 1. "STEP,STEP" line.long 0x40 "NUMERATOR,PLL Numerator Register" hexmask.long 0x40 2.--31. 1. "MFN,Numerator" line.long 0x44 "NUMERATOR_SET,PLL Numerator Register" hexmask.long 0x44 2.--31. 1. "MFN,Numerator" line.long 0x48 "NUMERATOR_CLR,PLL Numerator Register" hexmask.long 0x48 2.--31. 1. "MFN,Numerator" line.long 0x4C "NUMERATOR_TOG,PLL Numerator Register" hexmask.long 0x4C 2.--31. 1. "MFN,Numerator" line.long 0x50 "DENOMINATOR,PLL Denominator Register" hexmask.long 0x50 0.--29. 1. "MFD,Denominator" line.long 0x54 "DENOMINATOR_SET,PLL Denominator Register" hexmask.long 0x54 0.--29. 1. "MFD,Denominator" line.long 0x58 "DENOMINATOR_CLR,PLL Denominator Register" hexmask.long 0x58 0.--29. 1. "MFD,Denominator" line.long 0x5C "DENOMINATOR_TOG,PLL Denominator Register" hexmask.long 0x5C 0.--29. 1. "MFD,Denominator" line.long 0x60 "DIV,PLL Dividers Register" hexmask.long.word 0x60 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x60 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x60 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x64 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x64 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x64 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x64 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x68 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x68 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x68 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x68 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x6C "DIV_TOG,PLL Dividers Register" hexmask.long.word 0x6C 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x6C 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x6C 0.--7. 1. "ODIV,Output frequency divider for clock output" rgroup.long 0xF0++0x3 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" tree.end tree "AUDIO_FRACT_PLL2" base ad:0x44481200 group.long 0x0++0x6F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0: Normal mode,1: MULTIPHASE_SDM_DISABLE_MODE" newline bitfld.long 0x0 11. "DITHER_EN3,Dither Enable 3" "0: Normal mode,1: Dither enable for third stage of fractional.." newline bitfld.long 0x0 10. "DITHER_EN2,Dither Enable 2" "0: Normal mode,1: Dither enable for second stage of fractional.." newline bitfld.long 0x0 9. "DITHER_EN1,Dither Enable 1" "0: Normal mode,1: Dither enable for first stage of fractional.." newline bitfld.long 0x0 8. "SPREADCTL,Modulation type selection" "0: Modulation centered around nominal frequency.,1: Modulation spread below nominal frequency." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0x4 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0x4 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0x4 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0x4 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline eventfld.long 0x8 11. "DITHER_EN3,Dither Enable 3" "0,1" newline eventfld.long 0x8 10. "DITHER_EN2,Dither Enable 2" "0,1" newline eventfld.long 0x8 9. "DITHER_EN1,Dither Enable 1" "0,1" newline eventfld.long 0x8 8. "SPREADCTL,Modulation type selection" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0xC 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0xC 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0xC 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0xC 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x30 "SPREAD_SPECTRUM,PLL Spread Spectrum Register" hexmask.long.word 0x30 16.--31. 1. "STOP,Stop" newline bitfld.long 0x30 15. "ENABLE,ENABLE" "0: Disable spread spectrum modulation.,1: Enable spread spectrum modulation." newline hexmask.long.word 0x30 0.--14. 1. "STEP,STEP" line.long 0x34 "SPREAD_SPECTRUM_SET,PLL Spread Spectrum Register" hexmask.long.word 0x34 16.--31. 1. "STOP,Stop" newline bitfld.long 0x34 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "STEP,STEP" line.long 0x38 "SPREAD_SPECTRUM_CLR,PLL Spread Spectrum Register" hexmask.long.word 0x38 16.--31. 1. "STOP,Stop" newline eventfld.long 0x38 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x38 0.--14. 1. "STEP,STEP" line.long 0x3C "SPREAD_SPECTRUM_TOG,PLL Spread Spectrum Register" hexmask.long.word 0x3C 16.--31. 1. "STOP,Stop" newline bitfld.long 0x3C 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x3C 0.--14. 1. "STEP,STEP" line.long 0x40 "NUMERATOR,PLL Numerator Register" hexmask.long 0x40 2.--31. 1. "MFN,Numerator" line.long 0x44 "NUMERATOR_SET,PLL Numerator Register" hexmask.long 0x44 2.--31. 1. "MFN,Numerator" line.long 0x48 "NUMERATOR_CLR,PLL Numerator Register" hexmask.long 0x48 2.--31. 1. "MFN,Numerator" line.long 0x4C "NUMERATOR_TOG,PLL Numerator Register" hexmask.long 0x4C 2.--31. 1. "MFN,Numerator" line.long 0x50 "DENOMINATOR,PLL Denominator Register" hexmask.long 0x50 0.--29. 1. "MFD,Denominator" line.long 0x54 "DENOMINATOR_SET,PLL Denominator Register" hexmask.long 0x54 0.--29. 1. "MFD,Denominator" line.long 0x58 "DENOMINATOR_CLR,PLL Denominator Register" hexmask.long 0x58 0.--29. 1. "MFD,Denominator" line.long 0x5C "DENOMINATOR_TOG,PLL Denominator Register" hexmask.long 0x5C 0.--29. 1. "MFD,Denominator" line.long 0x60 "DIV,PLL Dividers Register" hexmask.long.word 0x60 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x60 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x60 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x64 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x64 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x64 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x64 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x68 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x68 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x68 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x68 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x6C "DIV_TOG,PLL Dividers Register" hexmask.long.word 0x6C 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x6C 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x6C 0.--7. 1. "ODIV,Output frequency divider for clock output" rgroup.long 0xF0++0x3 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" tree.end tree "SYS_FRACT_PLL1" base ad:0x44481000 group.long 0x0++0x6F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0: Normal mode,1: MULTIPHASE_SDM_DISABLE_MODE" newline bitfld.long 0x0 11. "DITHER_EN3,Dither Enable 3" "0: Normal mode,1: Dither enable for third stage of fractional.." newline bitfld.long 0x0 10. "DITHER_EN2,Dither Enable 2" "0: Normal mode,1: Dither enable for second stage of fractional.." newline bitfld.long 0x0 9. "DITHER_EN1,Dither Enable 1" "0: Normal mode,1: Dither enable for first stage of fractional.." newline bitfld.long 0x0 8. "SPREADCTL,Modulation type selection" "0: Modulation centered around nominal frequency.,1: Modulation spread below nominal frequency." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0x4 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0x4 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0x4 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0x4 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline eventfld.long 0x8 11. "DITHER_EN3,Dither Enable 3" "0,1" newline eventfld.long 0x8 10. "DITHER_EN2,Dither Enable 2" "0,1" newline eventfld.long 0x8 9. "DITHER_EN1,Dither Enable 1" "0,1" newline eventfld.long 0x8 8. "SPREADCTL,Modulation type selection" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0xC 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0xC 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0xC 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0xC 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x30 "SPREAD_SPECTRUM,PLL Spread Spectrum Register" hexmask.long.word 0x30 16.--31. 1. "STOP,Stop" newline bitfld.long 0x30 15. "ENABLE,ENABLE" "0: Disable spread spectrum modulation.,1: Enable spread spectrum modulation." newline hexmask.long.word 0x30 0.--14. 1. "STEP,STEP" line.long 0x34 "SPREAD_SPECTRUM_SET,PLL Spread Spectrum Register" hexmask.long.word 0x34 16.--31. 1. "STOP,Stop" newline bitfld.long 0x34 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "STEP,STEP" line.long 0x38 "SPREAD_SPECTRUM_CLR,PLL Spread Spectrum Register" hexmask.long.word 0x38 16.--31. 1. "STOP,Stop" newline eventfld.long 0x38 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x38 0.--14. 1. "STEP,STEP" line.long 0x3C "SPREAD_SPECTRUM_TOG,PLL Spread Spectrum Register" hexmask.long.word 0x3C 16.--31. 1. "STOP,Stop" newline bitfld.long 0x3C 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x3C 0.--14. 1. "STEP,STEP" line.long 0x40 "NUMERATOR,PLL Numerator Register" hexmask.long 0x40 2.--31. 1. "MFN,Numerator" line.long 0x44 "NUMERATOR_SET,PLL Numerator Register" hexmask.long 0x44 2.--31. 1. "MFN,Numerator" line.long 0x48 "NUMERATOR_CLR,PLL Numerator Register" hexmask.long 0x48 2.--31. 1. "MFN,Numerator" line.long 0x4C "NUMERATOR_TOG,PLL Numerator Register" hexmask.long 0x4C 2.--31. 1. "MFN,Numerator" line.long 0x50 "DENOMINATOR,PLL Denominator Register" hexmask.long 0x50 0.--29. 1. "MFD,Denominator" line.long 0x54 "DENOMINATOR_SET,PLL Denominator Register" hexmask.long 0x54 0.--29. 1. "MFD,Denominator" line.long 0x58 "DENOMINATOR_CLR,PLL Denominator Register" hexmask.long 0x58 0.--29. 1. "MFD,Denominator" line.long 0x5C "DENOMINATOR_TOG,PLL Denominator Register" hexmask.long 0x5C 0.--29. 1. "MFD,Denominator" line.long 0x60 "DIV,PLL Dividers Register" hexmask.long.word 0x60 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x60 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x60 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x64 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x64 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x64 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x64 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x68 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x68 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x68 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x68 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x6C "DIV_TOG,PLL Dividers Register" hexmask.long.word 0x6C 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x6C 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x6C 0.--7. 1. "ODIV,Output frequency divider for clock output" repeat 3. (list 0x0 0x1 0x2)(list ad:0x44481070 ad:0x44481090 ad:0x444810B0) tree "NO_OF_DFS[$1]" base $2 group.long ($2)++0x1F line.long 0x0 "DFS_CTRL_,DFS Control Register" bitfld.long 0x0 31. "ENABLE,Enable the DFS Block." "0: DFS block is disable.,1: DFS block is enable" bitfld.long 0x0 30. "CLKOUT_EN,Enable the DFS output clock." "0: DFS Clock output is disable.,1: DFS Clock output is enable" newline bitfld.long 0x0 29. "CLKOUT_DIVBY2_EN,Enable the DFS divide by 2 output clock." "0: DFS divide by 2 clock output is disable.,1: DFS divide by 2 clock output is enable" bitfld.long 0x0 23. "BYPASS_EN,Bypass the DFS." "0: DFS Clock output.,1: Bypass clock output" newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware control select disable. DFS is control..,1: Hardware control select enable.DFS is control by.." line.long 0x4 "DFS_CTRL__SET,DFS Control Register" bitfld.long 0x4 31. "ENABLE,Enable the DFS Block." "0,1" bitfld.long 0x4 30. "CLKOUT_EN,Enable the DFS output clock." "0,1" newline bitfld.long 0x4 29. "CLKOUT_DIVBY2_EN,Enable the DFS divide by 2 output clock." "0,1" bitfld.long 0x4 23. "BYPASS_EN,Bypass the DFS." "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" line.long 0x8 "DFS_CTRL__CLR,DFS Control Register" eventfld.long 0x8 31. "ENABLE,Enable the DFS Block." "0,1" eventfld.long 0x8 30. "CLKOUT_EN,Enable the DFS output clock." "0,1" newline eventfld.long 0x8 29. "CLKOUT_DIVBY2_EN,Enable the DFS divide by 2 output clock." "0,1" eventfld.long 0x8 23. "BYPASS_EN,Bypass the DFS." "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" line.long 0xC "DFS_CTRL__TOG,DFS Control Register" bitfld.long 0xC 31. "ENABLE,Enable the DFS Block." "0,1" bitfld.long 0xC 30. "CLKOUT_EN,Enable the DFS output clock." "0,1" newline bitfld.long 0xC 29. "CLKOUT_DIVBY2_EN,Enable the DFS divide by 2 output clock." "0,1" bitfld.long 0xC 23. "BYPASS_EN,Bypass the DFS." "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" line.long 0x10 "DFS_DIV_,DFS Division Register" hexmask.long.byte 0x10 8.--15. 1. "MFI,This field provides the integer part of division factor for port n." bitfld.long 0x10 0.--2. "MFN,This field provides the numerator of fractional part of division factor for port n." "0,1,2,3,4,5,6,7" line.long 0x14 "DFS_DIV__SET,DFS Division Register" hexmask.long.byte 0x14 8.--15. 1. "MFI,This field provides the integer part of division factor for port n." bitfld.long 0x14 0.--2. "MFN,This field provides the numerator of fractional part of division factor for port n." "0,1,2,3,4,5,6,7" line.long 0x18 "DFS_DIV__CLR,DFS Division Register" hexmask.long.byte 0x18 8.--15. 1. "MFI,This field provides the integer part of division factor for port n." eventfld.long 0x18 0.--2. "MFN,This field provides the numerator of fractional part of division factor for port n." "0,1,2,3,4,5,6,7" line.long 0x1C "DFS_DIV__TOG,DFS Division Register" hexmask.long.byte 0x1C 8.--15. 1. "MFI,This field provides the integer part of division factor for port n." bitfld.long 0x1C 0.--2. "MFN,This field provides the numerator of fractional part of division factor for port n." "0,1,2,3,4,5,6,7" tree.end repeat.end base ad:0x44481000 rgroup.long 0xF0++0x7 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" line.long 0x4 "DFS_STATUS,DFS Status Register" bitfld.long 0x4 0.--2. "DFS_OK,Status of clockout ok signal." "0: The corresponding dfs output clock is not valid.,1: The corresponding dfs output clock is valid.,?,?,?,?,?,?" tree.end tree "VIDEO_FRACT_PLL1" base ad:0x44481300 group.long 0x0++0x6F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0: Normal mode,1: MULTIPHASE_SDM_DISABLE_MODE" newline bitfld.long 0x0 11. "DITHER_EN3,Dither Enable 3" "0: Normal mode,1: Dither enable for third stage of fractional.." newline bitfld.long 0x0 10. "DITHER_EN2,Dither Enable 2" "0: Normal mode,1: Dither enable for second stage of fractional.." newline bitfld.long 0x0 9. "DITHER_EN1,Dither Enable 1" "0: Normal mode,1: Dither enable for first stage of fractional.." newline bitfld.long 0x0 8. "SPREADCTL,Modulation type selection" "0: Modulation centered around nominal frequency.,1: Modulation spread below nominal frequency." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0x4 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0x4 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0x4 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0x4 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline eventfld.long 0x8 11. "DITHER_EN3,Dither Enable 3" "0,1" newline eventfld.long 0x8 10. "DITHER_EN2,Dither Enable 2" "0,1" newline eventfld.long 0x8 9. "DITHER_EN1,Dither Enable 1" "0,1" newline eventfld.long 0x8 8. "SPREADCTL,Modulation type selection" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0xC 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0xC 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0xC 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0xC 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x30 "SPREAD_SPECTRUM,PLL Spread Spectrum Register" hexmask.long.word 0x30 16.--31. 1. "STOP,Stop" newline bitfld.long 0x30 15. "ENABLE,ENABLE" "0: Disable spread spectrum modulation.,1: Enable spread spectrum modulation." newline hexmask.long.word 0x30 0.--14. 1. "STEP,STEP" line.long 0x34 "SPREAD_SPECTRUM_SET,PLL Spread Spectrum Register" hexmask.long.word 0x34 16.--31. 1. "STOP,Stop" newline bitfld.long 0x34 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "STEP,STEP" line.long 0x38 "SPREAD_SPECTRUM_CLR,PLL Spread Spectrum Register" hexmask.long.word 0x38 16.--31. 1. "STOP,Stop" newline eventfld.long 0x38 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x38 0.--14. 1. "STEP,STEP" line.long 0x3C "SPREAD_SPECTRUM_TOG,PLL Spread Spectrum Register" hexmask.long.word 0x3C 16.--31. 1. "STOP,Stop" newline bitfld.long 0x3C 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x3C 0.--14. 1. "STEP,STEP" line.long 0x40 "NUMERATOR,PLL Numerator Register" hexmask.long 0x40 2.--31. 1. "MFN,Numerator" line.long 0x44 "NUMERATOR_SET,PLL Numerator Register" hexmask.long 0x44 2.--31. 1. "MFN,Numerator" line.long 0x48 "NUMERATOR_CLR,PLL Numerator Register" hexmask.long 0x48 2.--31. 1. "MFN,Numerator" line.long 0x4C "NUMERATOR_TOG,PLL Numerator Register" hexmask.long 0x4C 2.--31. 1. "MFN,Numerator" line.long 0x50 "DENOMINATOR,PLL Denominator Register" hexmask.long 0x50 0.--29. 1. "MFD,Denominator" line.long 0x54 "DENOMINATOR_SET,PLL Denominator Register" hexmask.long 0x54 0.--29. 1. "MFD,Denominator" line.long 0x58 "DENOMINATOR_CLR,PLL Denominator Register" hexmask.long 0x58 0.--29. 1. "MFD,Denominator" line.long 0x5C "DENOMINATOR_TOG,PLL Denominator Register" hexmask.long 0x5C 0.--29. 1. "MFD,Denominator" line.long 0x60 "DIV,PLL Dividers Register" hexmask.long.word 0x60 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x60 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x60 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x64 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x64 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x64 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x64 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x68 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x68 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x68 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x68 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x6C "DIV_TOG,PLL Dividers Register" hexmask.long.word 0x6C 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x6C 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x6C 0.--7. 1. "ODIV,Output frequency divider for clock output" rgroup.long 0xF0++0x3 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" tree.end tree.end tree "ANALOG_FRO" base ad:0x44485000 group.long 0x200++0x4F line.long 0x0 "CSR,FRO Control Status Register" eventfld.long 0x0 25. "TUNEONCE_DONE,FRO Tune Once Done Flag" "0: FRO tuneonce not complete.,1: FRO tuneonce done. Write-1 to clear and trigger.." rbitfld.long 0x0 24. "TRIM_LOCK,FRO Trim Lock Flag" "0: FRO auto trim locked to target frequency.,1: FRO auto trim not locked to target frequency" newline eventfld.long 0x0 18. "TRUPREQ,FRO Trim Updated Request Flag" "0: FRO Trim Updated request not detected.,1: FRO Trim Updated request detected." eventfld.long 0x0 17. "TUNE_ERR,FRO Trim Update Error Flag" "0: No Auto-Tune Error detected.,1: Auto Tune Error detected." newline eventfld.long 0x0 16. "LOL_ERR,FRO Trim Updated Loss of Lock Error Flag" "0: FRO loss of lock not detected.,1: FRO loss of lock detected." hexmask.long.byte 0x0 8.--12. 1. "CLKGATE,FRO Clkgate Enable" newline bitfld.long 0x0 7. "TUNEONCE,Tune Once Control" "0,1" bitfld.long 0x0 6. "COARSEN,Coarse Trim Enable" "0,1" newline bitfld.long 0x0 5. "TRUPEN,FRO Autotrim Updated Enable" "0: FRO configured in open loop mode. FRO frequency..,1: FRO auto trimming enabled. FRO trimmed to.." bitfld.long 0x0 4. "TREN,FRO Trim Enable" "0: FRO configured in open loop mode. FRO frequency..,1: FRO auto trimming enabled. FRO trimmed to.." newline bitfld.long 0x0 1. "SMODE,Suspend Mode" "0: FRO main clock disabled.,1: FRO main clock not disabled." bitfld.long 0x0 0. "FROEN,FRO Enable" "0,1" line.long 0x4 "CSR_SET,FRO Control Status Register" bitfld.long 0x4 25. "TUNEONCE_DONE,FRO Tune Once Done Flag" "0,1" rbitfld.long 0x4 24. "TRIM_LOCK,FRO Trim Lock Flag" "0,1" newline bitfld.long 0x4 18. "TRUPREQ,FRO Trim Updated Request Flag" "0,1" bitfld.long 0x4 17. "TUNE_ERR,FRO Trim Update Error Flag" "0,1" newline bitfld.long 0x4 16. "LOL_ERR,FRO Trim Updated Loss of Lock Error Flag" "0,1" hexmask.long.byte 0x4 8.--12. 1. "CLKGATE,FRO Clkgate Enable" newline bitfld.long 0x4 7. "TUNEONCE,Tune Once Control" "0,1" bitfld.long 0x4 6. "COARSEN,Coarse Trim Enable" "0,1" newline bitfld.long 0x4 5. "TRUPEN,FRO Autotrim Updated Enable" "0,1" bitfld.long 0x4 4. "TREN,FRO Trim Enable" "0,1" newline bitfld.long 0x4 1. "SMODE,Suspend Mode" "0,1" bitfld.long 0x4 0. "FROEN,FRO Enable" "0,1" line.long 0x8 "CSR_CLR,FRO Control Status Register" eventfld.long 0x8 25. "TUNEONCE_DONE,FRO Tune Once Done Flag" "0,1" eventfld.long 0x8 24. "TRIM_LOCK,FRO Trim Lock Flag" "0,1" newline eventfld.long 0x8 18. "TRUPREQ,FRO Trim Updated Request Flag" "0,1" eventfld.long 0x8 17. "TUNE_ERR,FRO Trim Update Error Flag" "0,1" newline eventfld.long 0x8 16. "LOL_ERR,FRO Trim Updated Loss of Lock Error Flag" "0,1" hexmask.long.byte 0x8 8.--12. 1. "CLKGATE,FRO Clkgate Enable" newline eventfld.long 0x8 7. "TUNEONCE,Tune Once Control" "0,1" eventfld.long 0x8 6. "COARSEN,Coarse Trim Enable" "0,1" newline eventfld.long 0x8 5. "TRUPEN,FRO Autotrim Updated Enable" "0,1" eventfld.long 0x8 4. "TREN,FRO Trim Enable" "0,1" newline eventfld.long 0x8 1. "SMODE,Suspend Mode" "0,1" eventfld.long 0x8 0. "FROEN,FRO Enable" "0,1" line.long 0xC "CSR_TOG,FRO Control Status Register" bitfld.long 0xC 25. "TUNEONCE_DONE,FRO Tune Once Done Flag" "0,1" rbitfld.long 0xC 24. "TRIM_LOCK,FRO Trim Lock Flag" "0,1" newline bitfld.long 0xC 18. "TRUPREQ,FRO Trim Updated Request Flag" "0,1" bitfld.long 0xC 17. "TUNE_ERR,FRO Trim Update Error Flag" "0,1" newline bitfld.long 0xC 16. "LOL_ERR,FRO Trim Updated Loss of Lock Error Flag" "0,1" hexmask.long.byte 0xC 8.--12. 1. "CLKGATE,FRO Clkgate Enable" newline bitfld.long 0xC 7. "TUNEONCE,Tune Once Control" "0,1" bitfld.long 0xC 6. "COARSEN,Coarse Trim Enable" "0,1" newline bitfld.long 0xC 5. "TRUPEN,FRO Autotrim Updated Enable" "0,1" bitfld.long 0xC 4. "TREN,FRO Trim Enable" "0,1" newline bitfld.long 0xC 1. "SMODE,Suspend Mode" "0,1" bitfld.long 0xC 0. "FROEN,FRO Enable" "0,1" line.long 0x10 "CNFG1,Trim Configuration 1 Register" hexmask.long.word 0x10 16.--31. 1. "RFCLKCNT,Reference Clock Counter" bitfld.long 0x10 14. "TRUPREQ_IE,Trim Update Request Interrupt Enable" "0: Trim update request interrupt disabled,1: Trim update request interrupt enabled" newline bitfld.long 0x10 13. "TUNE_ERR_IE,Trim Update Error Interrupt Enable" "0: Auto Trim loss of lock interrupt disabled,1: Auto Trim loss of lock interrupt enabled" bitfld.long 0x10 12. "LOL_ERR_IE,Trim Update Error Interrupt Enable" "0: Auto Trim loss of lock interrupt disabled,1: Auto Trim loss of lock interrupt enabled" newline bitfld.long 0x10 11. "FSTUPEN,FRO Fast Startup Enable" "0: FRO fast startup disabled,1: FRO fast startup enabled" hexmask.long.word 0x10 0.--10. 1. "REFDIV,OSC Reference Clock Divider" line.long 0x14 "CNFG1_SET,Trim Configuration 1 Register" hexmask.long.word 0x14 16.--31. 1. "RFCLKCNT,Reference Clock Counter" bitfld.long 0x14 14. "TRUPREQ_IE,Trim Update Request Interrupt Enable" "0,1" newline bitfld.long 0x14 13. "TUNE_ERR_IE,Trim Update Error Interrupt Enable" "0,1" bitfld.long 0x14 12. "LOL_ERR_IE,Trim Update Error Interrupt Enable" "0,1" newline bitfld.long 0x14 11. "FSTUPEN,FRO Fast Startup Enable" "0,1" hexmask.long.word 0x14 0.--10. 1. "REFDIV,OSC Reference Clock Divider" line.long 0x18 "CNFG1_CLR,Trim Configuration 1 Register" hexmask.long.word 0x18 16.--31. 1. "RFCLKCNT,Reference Clock Counter" eventfld.long 0x18 14. "TRUPREQ_IE,Trim Update Request Interrupt Enable" "0,1" newline eventfld.long 0x18 13. "TUNE_ERR_IE,Trim Update Error Interrupt Enable" "0,1" eventfld.long 0x18 12. "LOL_ERR_IE,Trim Update Error Interrupt Enable" "0,1" newline eventfld.long 0x18 11. "FSTUPEN,FRO Fast Startup Enable" "0,1" hexmask.long.word 0x18 0.--10. 1. "REFDIV,OSC Reference Clock Divider" line.long 0x1C "CNFG1_TOG,Trim Configuration 1 Register" hexmask.long.word 0x1C 16.--31. 1. "RFCLKCNT,Reference Clock Counter" bitfld.long 0x1C 14. "TRUPREQ_IE,Trim Update Request Interrupt Enable" "0,1" newline bitfld.long 0x1C 13. "TUNE_ERR_IE,Trim Update Error Interrupt Enable" "0,1" bitfld.long 0x1C 12. "LOL_ERR_IE,Trim Update Error Interrupt Enable" "0,1" newline bitfld.long 0x1C 11. "FSTUPEN,FRO Fast Startup Enable" "0,1" hexmask.long.word 0x1C 0.--10. 1. "REFDIV,OSC Reference Clock Divider" line.long 0x20 "CNFG2,Trim Configuration 2 Register" hexmask.long.word 0x20 16.--27. 1. "TRIM_DELAY,Trim Delay Register" bitfld.long 0x20 4. "CLKGATE,FRO 8M Clkgate Enable" "0,1" newline bitfld.long 0x20 0.--2. "FRODIV,FRO Clock Divider" "0,1,2,3,4,5,6,7" line.long 0x24 "CNFG2_SET,Trim Configuration 2 Register" hexmask.long.word 0x24 16.--27. 1. "TRIM_DELAY,Trim Delay Register" bitfld.long 0x24 4. "CLKGATE,FRO 8M Clkgate Enable" "0,1" newline bitfld.long 0x24 0.--2. "FRODIV,FRO Clock Divider" "0,1,2,3,4,5,6,7" line.long 0x28 "CNFG2_CLR,Trim Configuration 2 Register" hexmask.long.word 0x28 16.--27. 1. "TRIM_DELAY,Trim Delay Register" eventfld.long 0x28 4. "CLKGATE,FRO 8M Clkgate Enable" "0,1" newline eventfld.long 0x28 0.--2. "FRODIV,FRO Clock Divider" "0,1,2,3,4,5,6,7" line.long 0x2C "CNFG2_TOG,Trim Configuration 2 Register" hexmask.long.word 0x2C 16.--27. 1. "TRIM_DELAY,Trim Delay Register" bitfld.long 0x2C 4. "CLKGATE,FRO 8M Clkgate Enable" "0,1" newline bitfld.long 0x2C 0.--2. "FRODIV,FRO Clock Divider" "0,1,2,3,4,5,6,7" line.long 0x30 "FROTRIM,FRO Trim Register" hexmask.long.byte 0x30 16.--21. 1. "TRIMTEMP,Trim Temperature" hexmask.long.byte 0x30 7.--11. 1. "COARSE_TRIM,Coarse Trim Register" newline hexmask.long.byte 0x30 0.--6. 1. "FINE_TRIM,Fine Trim Register" line.long 0x34 "FROTRIM_SET,FRO Trim Register" hexmask.long.byte 0x34 16.--21. 1. "TRIMTEMP,Trim Temperature" hexmask.long.byte 0x34 7.--11. 1. "COARSE_TRIM,Coarse Trim Register" newline hexmask.long.byte 0x34 0.--6. 1. "FINE_TRIM,Fine Trim Register" line.long 0x38 "FROTRIM_CLR,FRO Trim Register" hexmask.long.byte 0x38 16.--21. 1. "TRIMTEMP,Trim Temperature" hexmask.long.byte 0x38 7.--11. 1. "COARSE_TRIM,Coarse Trim Register" newline hexmask.long.byte 0x38 0.--6. 1. "FINE_TRIM,Fine Trim Register" line.long 0x3C "FROTRIM_TOG,FRO Trim Register" hexmask.long.byte 0x3C 16.--21. 1. "TRIMTEMP,Trim Temperature" hexmask.long.byte 0x3C 7.--11. 1. "COARSE_TRIM,Coarse Trim Register" newline hexmask.long.byte 0x3C 0.--6. 1. "FINE_TRIM,Fine Trim Register" line.long 0x40 "TEXPCNT,FRO Expected Trim Count Register" hexmask.long.byte 0x40 16.--23. 1. "TEXPCNT_RANGE,Trim Expected Count Range" hexmask.long.word 0x40 0.--15. 1. "TEXPCNT,Trim Expected Count" line.long 0x44 "TEXPCNT_SET,FRO Expected Trim Count Register" hexmask.long.byte 0x44 16.--23. 1. "TEXPCNT_RANGE,Trim Expected Count Range" hexmask.long.word 0x44 0.--15. 1. "TEXPCNT,Trim Expected Count" line.long 0x48 "TEXPCNT_CLR,FRO Expected Trim Count Register" hexmask.long.byte 0x48 16.--23. 1. "TEXPCNT_RANGE,Trim Expected Count Range" hexmask.long.word 0x48 0.--15. 1. "TEXPCNT,Trim Expected Count" line.long 0x4C "TEXPCNT_TOG,FRO Expected Trim Count Register" hexmask.long.byte 0x4C 16.--23. 1. "TEXPCNT_RANGE,Trim Expected Count Range" hexmask.long.word 0x4C 0.--15. 1. "TEXPCNT,Trim Expected Count" rgroup.long 0x250++0x1F line.long 0x0 "AUTOTRIM,FRO Auto Tune Trim Register" hexmask.long.word 0x0 0.--11. 1. "AUTOTRIM,Auto Tune Trim Value" line.long 0x4 "AUTOTRIM_SET,FRO Auto Tune Trim Register" hexmask.long.word 0x4 0.--11. 1. "AUTOTRIM,Auto Tune Trim Value" line.long 0x8 "AUTOTRIM_CLR,FRO Auto Tune Trim Register" hexmask.long.word 0x8 0.--11. 1. "AUTOTRIM,Auto Tune Trim Value" line.long 0xC "AUTOTRIM_TOG,FRO Auto Tune Trim Register" hexmask.long.word 0xC 0.--11. 1. "AUTOTRIM,Auto Tune Trim Value" line.long 0x10 "TRIMCNT,FRO Trim Count Register" hexmask.long 0x10 0.--31. 1. "TRIMCNT,Trim Expected Count" line.long 0x14 "TRIMCNT_SET,FRO Trim Count Register" hexmask.long 0x14 0.--31. 1. "TRIMCNT,Trim Expected Count" line.long 0x18 "TRIMCNT_CLR,FRO Trim Count Register" hexmask.long 0x18 0.--31. 1. "TRIMCNT,Trim Expected Count" line.long 0x1C "TRIMCNT_TOG,FRO Trim Count Register" hexmask.long 0x1C 0.--31. 1. "TRIMCNT,Trim Expected Count" tree.end tree "ANALOG_IPC" base ad:0x44480000 group.long 0x90++0x3 line.long 0x0 "MRCC_EWM0,EWM0 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0x9C++0x3 line.long 0x0 "MRCC_SYSPM0,SYSPM0 reset and clock control" bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0xB0++0x7 line.long 0x0 "MRCC_WDOG0,WDOG0 reset and clock control" bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x4 "MRCC_WDOG1,WDOG1 reset and clock control" bitfld.long 0x4 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0xBC++0x3 line.long 0x0 "MRCC_SFA0,SFA0 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0xC8++0x7 line.long 0x0 "MRCC_FLEXSPI0,FLEXSPI0 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x0 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x0 4.--6. "MUX,Functional Clock Mux Select" "?,?,?,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x4 "MRCC_CRC0,CRC0 reset and clock control" rbitfld.long 0x4 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x4 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x4 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0xD4++0x3 line.long 0x0 "MRCC_TRDC0,TRDC0 reset and clock control" bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0xF8++0x37 line.long 0x0 "MRCC_LPIT0,LPIT0 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x0 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x0 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x4 "MRCC_TSTMR0,TSTMR0 reset and clock control" bitfld.long 0x4 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x8 "MRCC_TPM0,TPM0 reset and clock control" rbitfld.long 0x8 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x8 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x8 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x8 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0x8 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0xC "MRCC_TPM1,TPM1 reset and clock control" rbitfld.long 0xC 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0xC 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0xC 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0xC 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0xC 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x10 "MRCC_CAN0,CAN0 reset and clock control" rbitfld.long 0x10 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x10 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x10 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x10 4.--6. "MUX,Functional Clock Mux Select" "?,?,?,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x10 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x14 "MRCC_FLEXIO,FLEXIO reset and clock control" rbitfld.long 0x14 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x14 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x14 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x14 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x14 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x18 "MRCC_LPI2C0,LPI2C0 reset and clock control" rbitfld.long 0x18 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x18 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x18 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x18 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x18 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x1C "MRCC_LPI2C1,LPI2C1 reset and clock control" rbitfld.long 0x1C 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x1C 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x1C 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x1C 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x1C 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x20 "MRCC_I3C0,I3C0 reset and clock control" rbitfld.long 0x20 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x20 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x20 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x20 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x20 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x24 "MRCC_SAI0,SAI0 reset and clock control" rbitfld.long 0x24 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x24 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x24 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x24 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x24 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x28 "MRCC_LPSPI0,LPSPI0 reset and clock control" rbitfld.long 0x28 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x28 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x28 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x28 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x28 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x2C "MRCC_LPSPI1,LPSPI1 reset and clock control" rbitfld.long 0x2C 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x2C 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x2C 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x2C 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x2C 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x30 "MRCC_LPUART0,LPUART0 reset and clock control" rbitfld.long 0x30 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x30 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x30 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x30 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0x30 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x34 "MRCC_LPUART1,LPUART1 reset and clock control" rbitfld.long 0x34 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x34 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x34 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x34 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0x34 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0x134++0x3 line.long 0x0 "MRCC_USB0,USB0 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x0 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x0 4.--6. "MUX,Functional Clock Mux Select" "?,?,?,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0x13C++0x2F line.long 0x0 "MRCC_MICFIL0,MICFIL0 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x0 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x0 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x4 "MRCC_PORTA,PORTA reset and clock control" rbitfld.long 0x4 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x4 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x4 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x8 "MRCC_PORTB,PORTB reset and clock control" rbitfld.long 0x8 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x8 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x8 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0xC "MRCC_PORTC,PORTC reset and clock control" rbitfld.long 0xC 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0xC 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0xC 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x10 "MRCC_PORTE,PORTE reset and clock control" rbitfld.long 0x10 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x10 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x10 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x14 "MRCC_TSI0,TSI0 reset and clock control" rbitfld.long 0x14 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x14 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x14 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x14 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x14 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x18 "MRCC_LPADC0,LPADC0 reset and clock control" rbitfld.long 0x18 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x18 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x18 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x18 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x18 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x1C "MRCC_LPCMP0,LPCMP0 reset and clock control" rbitfld.long 0x1C 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x1C 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x1C 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x20 "MRCC_LPCMP1,LPCMP1 reset and clock control" rbitfld.long 0x20 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x20 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x20 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x24 "MRCC_LPDAC0,LPDAC0 reset and clock control" rbitfld.long 0x24 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x24 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x24 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x24 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x24 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x28 "MRCC_LPDAC1,LPDAC1 reset and clock control" rbitfld.long 0x28 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x28 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x28 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x28 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x28 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x2C "MRCC_VREF0,VREF0 reset and clock control" rbitfld.long 0x2C 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x2C 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x2C 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0x208++0x3 line.long 0x0 "MRCC_EDGELOCK,EDGELOCK reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0x210++0x2B line.long 0x0 "MRCC_LPIT1,LPIT1 reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x0 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x0 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x4 "MRCC_ENC0,ENC0 reset and clock control" rbitfld.long 0x4 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x4 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x4 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x8 "MRCC_PWM0,PWM0 reset and clock control" rbitfld.long 0x8 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x8 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x8 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0xC "MRCC_TPM2,TPM2 reset and clock control" rbitfld.long 0xC 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0xC 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0xC 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0xC 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0xC 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x10 "MRCC_TPM3,TPM3 reset and clock control" rbitfld.long 0x10 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x10 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x10 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x10 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0x10 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x14 "MRCC_LPI2C2,LPI2C2 reset and clock control" rbitfld.long 0x14 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x14 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x14 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x14 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x14 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x18 "MRCC_LPI2C3,LPI2C3 reset and clock control" rbitfld.long 0x18 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x18 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x18 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x18 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x18 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x1C "MRCC_LPSPI2,LPSPI2 reset and clock control" rbitfld.long 0x1C 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x1C 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x1C 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x1C 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x1C 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x20 "MRCC_LPSPI3,LPSPI3 reset and clock control" rbitfld.long 0x20 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x20 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x20 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x20 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x20 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x24 "MRCC_LPUART2,LPUART2 reset and clock control" rbitfld.long 0x24 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x24 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x24 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x24 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0x24 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x28 "MRCC_LPUART3,LPUART3 reset and clock control" rbitfld.long 0x28 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x28 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x28 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x28 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,5: 32K-CLK,?,?" newline bitfld.long 0x28 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." group.long 0x404++0x2B line.long 0x0 "MRCC_GPIOA,GPIOA reset and clock control" rbitfld.long 0x0 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x0 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x0 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x4 "MRCC_GPIOB,GPIOB reset and clock control" rbitfld.long 0x4 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x4 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x4 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x8 "MRCC_GPIOC,GPIOC reset and clock control" rbitfld.long 0x8 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x8 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x8 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0xC "MRCC_GPIOE,GPIOE reset and clock control" rbitfld.long 0xC 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0xC 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0xC 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x10 "MRCC_MICFIL0_FILTER,MICFIL0_FILTER reset and clock control" rbitfld.long 0x10 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x10 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline hexmask.long.byte 0x10 8.--11. 1. "DIV,Functional Clock Divider (0000=1 1111=16)" bitfld.long 0x10 4.--6. "MUX,Functional Clock Mux Select" "?,?,2: FRO-6M,3: FRO-192M,4: SOSC_CLK,?,?,?" newline bitfld.long 0x10 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x14 "MRCC_DMA0,DMA0 reset and clock control" rbitfld.long 0x14 31. "PR,Peripheral Present" "0: Module is not present; writes to this register..,1: Module is present" bitfld.long 0x14 30. "RSTB,Reset Negation" "0: Module is held in reset,1: Module released from reset" newline bitfld.long 0x14 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x18 "MRCC_NPX,NPX reset and clock control" bitfld.long 0x18 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x1C "MRCC_CTCM,CTCM reset and clock control" bitfld.long 0x1C 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x20 "MRCC_STCM,STCM reset and clock control" bitfld.long 0x20 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x24 "MRCC_SYSRAM0,SYSRAM0 reset and clock control" bitfld.long 0x24 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." line.long 0x28 "MRCC_SYSRAM1,SYSRAM1 reset and clock control" bitfld.long 0x28 0.--1. "CC,Clock Config" "0: Peripheral clocks are disabled; module does not..,1: Peripheral clocks are enabled; module does not..,2: Peripheral clocks are enabled unless module is..,3: Peripheral clocks are enabled unless in SLEEP.." tree.end tree "ANALOG_PMR" base ad:0x44484000 group.long 0x0++0x7 line.long 0x0 "CTRL1,Control Register CTRL" bitfld.long 0x0 24.--26. "DIV,Programmable Divider bits" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" hexmask.long.tbyte 0x0 0.--17. 1. "EN,18 Dut Ring Oscillator enable" line.long 0x4 "CTRL2,Control Register CTRL2" hexmask.long.tbyte 0x4 0.--17. 1. "CLKGEN,18 Dut Ring Oscillator (RO) Clock Gate enable" tree.end tree "ANALOG_SFA" base ad:0x44483000 group.long 0x0++0xB line.long 0x0 "CTRL,Signal Frequency Analyser (SFA) Control" bitfld.long 0x0 24. "CUT_SEL,CUT_SEL" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "CUT_PREDIV,CUT_PREDIV" newline bitfld.long 0x0 12. "TRIG_END_SEL,Signal MUX For Trigger Based Measurement End" "0,1" newline bitfld.long 0x0 8. "TRIG_START_SEL,Signal MUX For Trigger Based Measurement Start" "0,1" newline bitfld.long 0x0 6. "SFA_EN,SFA Enable" "0: The SFA is disabled.,1: The SFA is enabled." newline bitfld.long 0x0 5. "SFA_IRQ_EN,SFA Interrupt Enable" "0: Interrupts are disabled.,1: Interrupts are enabled." newline bitfld.long 0x0 4. "SFA_TRIG_MEAS_EN,SFA Triggered Measurement Enable" "0: The measurement will start by default with a..,1: The measurement will start after receiging a.." newline bitfld.long 0x0 3. "TRIG_END_POL,Trigger End Polarity" "0: Rising edge of TRIGER[TRIG_END_SEL] will end the..,1: Falling edge of TRIGGER[TRIG_END_SEL] will end.." newline bitfld.long 0x0 2. "TRIG_START_POL,Trigger Start Polarity" "0: Rising edge of TRIGGER[TRIG_START_SEL] will..,1: Falling edge of TRIGGER[TRIG_START_SEL] will.." newline bitfld.long 0x0 0.--1. "MODE,MEASUREMENT MODE" "0: Frequency measurement performed with REF..,1: Frequency measurement performed with REF..,2: CUT period measurement performed.,3: Trigger based measurement performed. Note each.." line.long 0x4 "CTRL_EXT,Signal Frequency Analyser (SFA) Control Extended" bitfld.long 0x4 16. "CUT_PIN_EN,CUT_PIN_EN" "0,1" newline bitfld.long 0x4 0. "CUT_CLK_EN,CUT_CLK_EN" "0,1" line.long 0x8 "CNT_STAT,Signal Frequency Analyser Count Status Register" eventfld.long 0x8 4. "SFA_IRQ,SFA Interrupt Request" "0,1" newline rbitfld.long 0x8 3. "REF_CNT_TIMEOUT,Reference Counter Time Out" "0,1" newline rbitfld.long 0x8 2. "MEAS_STARTED,Measurement Started Flag" "0,1" newline rbitfld.long 0x8 1. "CUT_STOPPED,CUT_STOPPED" "0,1" newline rbitfld.long 0x8 0. "REF_STOPPED,REF_STOPPED" "0,1" rgroup.long 0xC++0x7 line.long 0x0 "CUT_CNT,Signal Frequency Analyser Clock Under Test Counter" hexmask.long 0x0 0.--31. 1. "CUT_CNT,CUT_CNT" line.long 0x4 "REF_CNT,Signal Frequency Analyser Reference Clock Counter" hexmask.long 0x4 0.--31. 1. "REF_CNT,REF_CNT" group.long 0x14++0x7 line.long 0x0 "CUT_TARGET,Signal Frequency Analyser Clock Under Test Target Count" hexmask.long 0x0 0.--31. 1. "CUT_TARGET,CUT_TARGET" line.long 0x4 "REF_TARGET,Signal Frequency Analyser Reference Clock Target Count" hexmask.long 0x4 0.--31. 1. "REF_TARGET,REF_TARGET" rgroup.long 0x1C++0x7 line.long 0x0 "REF_CNT_ST_SAVED,Signal Frequency Analyser Reference Clock Count Start Saved Register" hexmask.long 0x0 0.--31. 1. "REF_CNT_ST_SAVED,REF_CNT_ST_SAVED" line.long 0x4 "REF_CNT_END_SAVED,Signal Frequency Analyser Reference Clock Count End Saved Register" hexmask.long 0x4 0.--31. 1. "REF_CNT_END_SAVED,REF_CNT_END_SAVED" tree.end tree "ANALOG_TCU" base ad:0x444C0000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" rgroup.long 0x500++0x3 line.long 0x0 "tcu_tempsenser_mode,tempsenser expose test mode" bitfld.long 0x0 16. "ipt_temp_valid,temperature data valid observation" "0,1" hexmask.long.word 0x0 0.--15. 1. "ipt_temp_data,temperature data observation" group.long 0x540++0x3 line.long 0x0 "tcu_clk_muxsel,clock sel" bitfld.long 0x0 6.--7. "ipt_osc_clkin_mux_sel0,osc clkin0 sel" "0,1,2,3" bitfld.long 0x0 4.--5. "ipt_osc_clkin_mux_sel1,osc clkin1 sel" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "ipt_clk_src_mux_sel,clock source sel" group.long 0x550++0x3 line.long 0x0 "tcu_expose,expose mode enable" bitfld.long 0x0 0. "tcu_expose_mode,dft fuse disable" "0,1" group.long 0xA50++0xF line.long 0x0 "tcu_adc_control_,ADC control register" bitfld.long 0x0 3. "adc_adc_pd,Used to drive powerdown signal when adc_all_analog_pd is set" "0,1" bitfld.long 0x0 2. "adc_all_analog_pd,Enables Powerdown cntrl by adc_adc_pd" "0,1" bitfld.long 0x0 1. "adc_tst_wren,test mode register write enable" "0,1" bitfld.long 0x0 0. "adc_muxing_en,ADC exposed mode iomux enable" "0,1" line.long 0x4 "tcu_adc_control__SET,ADC control register" bitfld.long 0x4 3. "adc_adc_pd,Used to drive powerdown signal when adc_all_analog_pd is set" "0,1" bitfld.long 0x4 2. "adc_all_analog_pd,Enables Powerdown cntrl by adc_adc_pd" "0,1" bitfld.long 0x4 1. "adc_tst_wren,test mode register write enable" "0,1" bitfld.long 0x4 0. "adc_muxing_en,ADC exposed mode iomux enable" "0,1" line.long 0x8 "tcu_adc_control__CLR,ADC control register" eventfld.long 0x8 3. "adc_adc_pd,Used to drive powerdown signal when adc_all_analog_pd is set" "0,1" eventfld.long 0x8 2. "adc_all_analog_pd,Enables Powerdown cntrl by adc_adc_pd" "0,1" eventfld.long 0x8 1. "adc_tst_wren,test mode register write enable" "0,1" eventfld.long 0x8 0. "adc_muxing_en,ADC exposed mode iomux enable" "0,1" line.long 0xC "tcu_adc_control__TOG,ADC control register" bitfld.long 0xC 3. "adc_adc_pd,Used to drive powerdown signal when adc_all_analog_pd is set" "0,1" bitfld.long 0xC 2. "adc_all_analog_pd,Enables Powerdown cntrl by adc_adc_pd" "0,1" bitfld.long 0xC 1. "adc_tst_wren,test mode register write enable" "0,1" bitfld.long 0xC 0. "adc_muxing_en,ADC exposed mode iomux enable" "0,1" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 1.--3. "tcu_fuse_obs,fuse observation" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree "ANALOG_TMPSNS" base ad:0x44482000 group.long 0x0++0x4F line.long 0x0 "CTRL0,Control 0" bitfld.long 0x0 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x0 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline bitfld.long 0x0 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." newline bitfld.long 0x0 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." newline bitfld.long 0x0 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." line.long 0x4 "CTRL0_SET,Control 0" bitfld.long 0x4 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0,1" newline bitfld.long 0x4 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0,1" newline bitfld.long 0x4 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0,1" newline bitfld.long 0x4 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x4 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline bitfld.long 0x4 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0,1" newline bitfld.long 0x4 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0,1" newline bitfld.long 0x4 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0,1" newline bitfld.long 0x4 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0,1,2,3" newline bitfld.long 0x4 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0,1,2,3" newline bitfld.long 0x4 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0,1,2,3" line.long 0x8 "CTRL0_CLR,Control 0" eventfld.long 0x8 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0,1" newline eventfld.long 0x8 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0,1" newline eventfld.long 0x8 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0,1" newline eventfld.long 0x8 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x8 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline eventfld.long 0x8 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0,1" newline eventfld.long 0x8 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0,1" newline eventfld.long 0x8 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0,1" newline eventfld.long 0x8 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0,1,2,3" newline eventfld.long 0x8 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0,1,2,3" newline eventfld.long 0x8 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0,1,2,3" line.long 0xC "CTRL0_TOG,Control 0" bitfld.long 0xC 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0,1" newline bitfld.long 0xC 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0,1" newline bitfld.long 0xC 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0,1" newline bitfld.long 0xC 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0xC 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline bitfld.long 0xC 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0,1" newline bitfld.long 0xC 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0,1" newline bitfld.long 0xC 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0,1" newline bitfld.long 0xC 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0,1,2,3" newline bitfld.long 0xC 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0,1,2,3" newline bitfld.long 0xC 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0,1,2,3" line.long 0x10 "STAT0,Status 0" rbitfld.long 0x10 31. "IDLE,Idle State" "0: Conversion,1: Idle" newline rbitfld.long 0x10 16. "DRDY0_IF,Data Ready Flag" "0: No new data,1: New data" newline rbitfld.long 0x10 14. "THR2_STAT,Threshold2 State" "0,1" newline rbitfld.long 0x10 13. "THR1_STAT,Threshold1 State" "0,1" newline rbitfld.long 0x10 12. "THR0_STAT,Threshold0 State" "0,1" newline eventfld.long 0x10 10. "THR2_IF,Threshold2 Status Flag" "0: Event did not occur,1: Event occurred" newline eventfld.long 0x10 9. "THR1_IF,Threshold1 Status Flag" "0: Event did not occur,1: Event occurred" newline eventfld.long 0x10 8. "THR0_IF,Threshold0 Status Flag" "0: Event did not occur,1: Event occurred" line.long 0x14 "STAT0_SET,Status 0" rbitfld.long 0x14 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x14 16. "DRDY0_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x14 14. "THR2_STAT,Threshold2 State" "0,1" newline rbitfld.long 0x14 13. "THR1_STAT,Threshold1 State" "0,1" newline rbitfld.long 0x14 12. "THR0_STAT,Threshold0 State" "0,1" newline bitfld.long 0x14 10. "THR2_IF,Threshold2 Status Flag" "0,1" newline bitfld.long 0x14 9. "THR1_IF,Threshold1 Status Flag" "0,1" newline bitfld.long 0x14 8. "THR0_IF,Threshold0 Status Flag" "0,1" line.long 0x18 "STAT0_CLR,Status 0" eventfld.long 0x18 31. "IDLE,Idle State" "0,1" newline eventfld.long 0x18 16. "DRDY0_IF,Data Ready Flag" "0,1" newline eventfld.long 0x18 14. "THR2_STAT,Threshold2 State" "0,1" newline eventfld.long 0x18 13. "THR1_STAT,Threshold1 State" "0,1" newline eventfld.long 0x18 12. "THR0_STAT,Threshold0 State" "0,1" newline eventfld.long 0x18 10. "THR2_IF,Threshold2 Status Flag" "0,1" newline eventfld.long 0x18 9. "THR1_IF,Threshold1 Status Flag" "0,1" newline eventfld.long 0x18 8. "THR0_IF,Threshold0 Status Flag" "0,1" line.long 0x1C "STAT0_TOG,Status 0" rbitfld.long 0x1C 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x1C 16. "DRDY0_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x1C 14. "THR2_STAT,Threshold2 State" "0,1" newline rbitfld.long 0x1C 13. "THR1_STAT,Threshold1 State" "0,1" newline rbitfld.long 0x1C 12. "THR0_STAT,Threshold0 State" "0,1" newline bitfld.long 0x1C 10. "THR2_IF,Threshold2 Status Flag" "0,1" newline bitfld.long 0x1C 9. "THR1_IF,Threshold1 Status Flag" "0,1" newline bitfld.long 0x1C 8. "THR0_IF,Threshold0 Status Flag" "0,1" line.long 0x20 "DATA0,Data 0" hexmask.long.word 0x20 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x24 "DATA0_SET,Data 0" hexmask.long.word 0x24 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x28 "DATA0_CLR,Data 0" hexmask.long.word 0x28 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x2C "DATA0_TOG,Data 0" hexmask.long.word 0x2C 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x30 "THR_CTRL01,Threshold Control 01" hexmask.long.word 0x30 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x30 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x34 "THR_CTRL01_SET,Threshold Control 01" hexmask.long.word 0x34 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x34 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x38 "THR_CTRL01_CLR,Threshold Control 01" hexmask.long.word 0x38 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x38 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x3C "THR_CTRL01_TOG,Threshold Control 01" hexmask.long.word 0x3C 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x3C 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x40 "THR_CTRL23,Threshold Control 23" hexmask.long.word 0x40 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" line.long 0x44 "THR_CTRL23_SET,Threshold Control 23" hexmask.long.word 0x44 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" line.long 0x48 "THR_CTRL23_CLR,Threshold Control 23" hexmask.long.word 0x48 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" line.long 0x4C "THR_CTRL23_TOG,Threshold Control 23" hexmask.long.word 0x4C 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" group.long 0x200++0x2F line.long 0x0 "CTRL1,Control 1" bitfld.long 0x0 31. "ENABLE,Enable TEMPSENSE" "0: Disable,1: Enable" newline bitfld.long 0x0 30. "START,Start Measurement" "0: No effect,1: Start the measurement" newline bitfld.long 0x0 29. "STOP,Stop Measurement" "0: Cleared by the HW after conversion is stopped.,1: Stops the conversion." newline bitfld.long 0x0 24.--25. "MEAS_MODE,Measurement Mode" "0: Single One-Shot Measurement,1: Continuous Measurement,2: Periodic One-Shot Measurement,?" newline bitfld.long 0x0 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 18.--19. "RESOLUTION,Resolution Mode" "0: 0.59325 ms,1: 1.10525 ms,2: 2.12925 ms,3: 4.17725 ms" newline bitfld.long 0x0 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x0 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline bitfld.long 0x0 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." newline bitfld.long 0x0 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." line.long 0x4 "CTRL1_SET,Control 1" bitfld.long 0x4 31. "ENABLE,Enable TEMPSENSE" "0,1" newline bitfld.long 0x4 30. "START,Start Measurement" "0,1" newline bitfld.long 0x4 29. "STOP,Stop Measurement" "0,1" newline bitfld.long 0x4 24.--25. "MEAS_MODE,Measurement Mode" "0,1,2,3" newline bitfld.long 0x4 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0,1" newline bitfld.long 0x4 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0,1" newline bitfld.long 0x4 18.--19. "RESOLUTION,Resolution Mode" "0,1,2,3" newline bitfld.long 0x4 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0,1" newline bitfld.long 0x4 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x4 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline bitfld.long 0x4 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0,1" newline bitfld.long 0x4 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0,1" newline bitfld.long 0x4 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0,1,2,3" newline bitfld.long 0x4 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0,1,2,3" line.long 0x8 "CTRL1_CLR,Control 1" eventfld.long 0x8 31. "ENABLE,Enable TEMPSENSE" "0,1" newline eventfld.long 0x8 30. "START,Start Measurement" "0,1" newline eventfld.long 0x8 29. "STOP,Stop Measurement" "0,1" newline eventfld.long 0x8 24.--25. "MEAS_MODE,Measurement Mode" "0,1,2,3" newline eventfld.long 0x8 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0,1" newline eventfld.long 0x8 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0,1" newline eventfld.long 0x8 18.--19. "RESOLUTION,Resolution Mode" "0,1,2,3" newline eventfld.long 0x8 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0,1" newline eventfld.long 0x8 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x8 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline eventfld.long 0x8 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0,1" newline eventfld.long 0x8 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0,1" newline eventfld.long 0x8 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0,1,2,3" newline eventfld.long 0x8 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0,1,2,3" line.long 0xC "CTRL1_TOG,Control 1" bitfld.long 0xC 31. "ENABLE,Enable TEMPSENSE" "0,1" newline bitfld.long 0xC 30. "START,Start Measurement" "0,1" newline bitfld.long 0xC 29. "STOP,Stop Measurement" "0,1" newline bitfld.long 0xC 24.--25. "MEAS_MODE,Measurement Mode" "0,1,2,3" newline bitfld.long 0xC 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0,1" newline bitfld.long 0xC 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0,1" newline bitfld.long 0xC 18.--19. "RESOLUTION,Resolution Mode" "0,1,2,3" newline bitfld.long 0xC 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0,1" newline bitfld.long 0xC 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0xC 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline bitfld.long 0xC 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0,1" newline bitfld.long 0xC 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0,1" newline bitfld.long 0xC 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0,1,2,3" newline bitfld.long 0xC 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0,1,2,3" line.long 0x10 "STAT1,Status 1" rbitfld.long 0x10 31. "IDLE,Idle State" "0: Conversion,1: Idle" newline rbitfld.long 0x10 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0: No new data,1: New data" newline rbitfld.long 0x10 16. "DRDY1_IF,Data Ready Flag" "0: No new data,1: New data" newline rbitfld.long 0x10 13. "THR5_STAT,Threshold5 State" "0,1" newline rbitfld.long 0x10 12. "THR4_STAT,Threshold4 State" "0,1" newline eventfld.long 0x10 9. "THR5_IF,Threshold5 Status Flag" "0: Event did not occur,1: Event occurred" newline eventfld.long 0x10 8. "THR4_IF,Threshold4 Status Flag" "0: Event did not occur,1: Event occurred" line.long 0x14 "STAT1_SET,Status 1" rbitfld.long 0x14 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x14 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0,1" newline rbitfld.long 0x14 16. "DRDY1_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x14 13. "THR5_STAT,Threshold5 State" "0,1" newline rbitfld.long 0x14 12. "THR4_STAT,Threshold4 State" "0,1" newline bitfld.long 0x14 9. "THR5_IF,Threshold5 Status Flag" "0,1" newline bitfld.long 0x14 8. "THR4_IF,Threshold4 Status Flag" "0,1" line.long 0x18 "STAT1_CLR,Status 1" eventfld.long 0x18 31. "IDLE,Idle State" "0,1" newline eventfld.long 0x18 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0,1" newline eventfld.long 0x18 16. "DRDY1_IF,Data Ready Flag" "0,1" newline eventfld.long 0x18 13. "THR5_STAT,Threshold5 State" "0,1" newline eventfld.long 0x18 12. "THR4_STAT,Threshold4 State" "0,1" newline eventfld.long 0x18 9. "THR5_IF,Threshold5 Status Flag" "0,1" newline eventfld.long 0x18 8. "THR4_IF,Threshold4 Status Flag" "0,1" line.long 0x1C "STAT1_TOG,Status 1" rbitfld.long 0x1C 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x1C 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0,1" newline rbitfld.long 0x1C 16. "DRDY1_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x1C 13. "THR5_STAT,Threshold5 State" "0,1" newline rbitfld.long 0x1C 12. "THR4_STAT,Threshold4 State" "0,1" newline bitfld.long 0x1C 9. "THR5_IF,Threshold5 Status Flag" "0,1" newline bitfld.long 0x1C 8. "THR4_IF,Threshold4 Status Flag" "0,1" line.long 0x20 "DATA1,Data 1" hexmask.long.word 0x20 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x24 "DATA1_SET,Data 1" hexmask.long.word 0x24 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x28 "DATA1_CLR,Data 1" hexmask.long.word 0x28 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x2C "DATA1_TOG,Data 1" hexmask.long.word 0x2C 0.--15. 1. "DATA_VAL,Temperature Data Value" group.long 0x250++0xF line.long 0x0 "THR_CTRL45,Threshold Control 45" hexmask.long.word 0x0 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0x0 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" line.long 0x4 "THR_CTRL45_SET,Threshold Control 45" hexmask.long.word 0x4 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0x4 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" line.long 0x8 "THR_CTRL45_CLR,Threshold Control 45" hexmask.long.word 0x8 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0x8 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" line.long 0xC "THR_CTRL45_TOG,Threshold Control 45" hexmask.long.word 0xC 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0xC 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" group.long 0x270++0x13 line.long 0x0 "PERIOD_CTRL,Measurement Period Control" hexmask.long.tbyte 0x0 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0x4 "PERIOD_CTRL_SET,Measurement Period Control" hexmask.long.tbyte 0x4 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0x8 "PERIOD_CTRL_CLR,Measurement Period Control" hexmask.long.tbyte 0x8 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0xC "PERIOD_CTRL_TOG,Measurement Period Control" hexmask.long.tbyte 0xC 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0x10 "REF_DIV,Ref Clock Divider Control" bitfld.long 0x10 31. "DE,Divider Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x10 16.--23. 1. "DIV,Divider Value" group.long 0x2B0++0xF line.long 0x0 "PUD_ST_CTRL,Power-Up Delay and Self-Test Control" hexmask.long.byte 0x0 16.--23. 1. "PUD,Power-Up Delay" newline bitfld.long 0x0 4.--5. "SELADCOUT,Debug ADC Output Selection" "0: ADC output,1: ADC output first half of conversion,2: ADC output second half of conversion,3: Internal register indicating reciprocal of ADC.." newline bitfld.long 0x0 0.--1. "MODE_SELFTEST,Self-Test Mode" "0: Normal temperature conversion mode,1: BJT Core BIST mode,2: ADC BIST mode,3: ADC BIST mode" line.long 0x4 "PUD_ST_CTRL_SET,Power-Up Delay and Self-Test Control" hexmask.long.byte 0x4 16.--23. 1. "PUD,Power-Up Delay" newline bitfld.long 0x4 4.--5. "SELADCOUT,Debug ADC Output Selection" "0,1,2,3" newline bitfld.long 0x4 0.--1. "MODE_SELFTEST,Self-Test Mode" "0,1,2,3" line.long 0x8 "PUD_ST_CTRL_CLR,Power-Up Delay and Self-Test Control" hexmask.long.byte 0x8 16.--23. 1. "PUD,Power-Up Delay" newline eventfld.long 0x8 4.--5. "SELADCOUT,Debug ADC Output Selection" "0,1,2,3" newline eventfld.long 0x8 0.--1. "MODE_SELFTEST,Self-Test Mode" "0,1,2,3" line.long 0xC "PUD_ST_CTRL_TOG,Power-Up Delay and Self-Test Control" hexmask.long.byte 0xC 16.--23. 1. "PUD,Power-Up Delay" newline bitfld.long 0xC 4.--5. "SELADCOUT,Debug ADC Output Selection" "0,1,2,3" newline bitfld.long 0xC 0.--1. "MODE_SELFTEST,Self-Test Mode" "0,1,2,3" rgroup.long 0x2C0++0xF line.long 0x0 "DBG_DATA,Debug Data" hexmask.long.word 0x0 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" line.long 0x4 "DBG_DATA_SET,Debug Data" hexmask.long.word 0x4 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" line.long 0x8 "DBG_DATA_CLR,Debug Data" hexmask.long.word 0x8 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" line.long 0xC "DBG_DATA_TOG,Debug Data" hexmask.long.word 0xC 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" group.long 0x2E0++0x1F line.long 0x0 "TRIM1,Trim Control 1" hexmask.long.word 0x0 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0x0 0.--15. 1. "VAL_A,VAL_A" line.long 0x4 "TRIM1_SET,Trim Control 1" hexmask.long.word 0x4 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0x4 0.--15. 1. "VAL_A,VAL_A" line.long 0x8 "TRIM1_CLR,Trim Control 1" hexmask.long.word 0x8 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0x8 0.--15. 1. "VAL_A,VAL_A" line.long 0xC "TRIM1_TOG,Trim Control 1" hexmask.long.word 0xC 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0xC 0.--15. 1. "VAL_A,VAL_A" line.long 0x10 "TRIM2,Trim Control 2" hexmask.long.word 0x10 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x10 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" line.long 0x14 "TRIM2_SET,Trim Control 2" hexmask.long.word 0x14 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x14 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" line.long 0x18 "TRIM2_CLR,Trim Control 2" hexmask.long.word 0x18 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x18 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" line.long 0x1C "TRIM2_TOG,Trim Control 2" hexmask.long.word 0x1C 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x1C 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" tree.end tree "ANALOG_VDET" base ad:0x44486000 group.long 0x200++0x1F line.long 0x0 "CTRL,Control Register" bitfld.long 0x0 24.--25. "HV_LVD_MODE_CTRL_LV,HV LVD Mode Control" "0: Sets the HV LVD in functional mode. This setting..,1: Sets the HV LVD in force mode. This bypass the..,2: Sets the HV LVD in self-test mode. In this mode..,3: Sets the HV LVD in self-test of force mode. This.." newline bitfld.long 0x0 16.--17. "CORE_LVD_MODE_CTRL_LV,LVD Mode Control" "0: Sets the core LVD in Functional mode. This..,1: Sets the core LVD in Force mode. This bypass the..,2: Sets the core LVD in self-test mode. In this..,3: Sets the core LVD in self-test of Force mode." newline bitfld.long 0x0 8.--9. "CORE_HVD_MODE_CTRL_LV,HVD Mode Control" "0: Sets the core HVD in Functional mode. This..,1: Sets the core HVD in Force mode. This bypass the..,2: Sets the core HVD in self-test mode. In this..,3: Sets the core HVD in self-test of Force mode." newline bitfld.long 0x0 5. "HV_LVD_LATCH_CLEAR_LV,Control Bit for Clearing HV LVD Latch" "0,1" newline bitfld.long 0x0 4. "CORE_LVD_LATCH_CLEAR_LV,Control Bit for Clearing Core LVD Latch" "0,1" newline bitfld.long 0x0 3. "CORE_HVD_LATCH_CLEAR_LV,Control Bit for Clearing Core HVD Latch" "0,1" newline bitfld.long 0x0 2. "EN_BUF2_LV,Enable/Disable for vref2 Output Pin Buffer of 800 mV" "0: Disable the vref2 output pin buffer of 800 mV,1: Enable the vref2 output pin buffer of 800 mV" newline bitfld.long 0x0 1. "EN_BUF1_LV,Enable/Disable for vref1 Output Pin Buffer of 600 mV" "0: Disable the vref1 output pin buffer of 600 mV,1: Enable the vref1 output pin buffer of 600 mV" newline bitfld.long 0x0 0. "EN_LV,Enable DA_IP" "0: Disables LVD/HVD/Bandgap/ Bias circuits,1: Enables LVD/HVD/Bandgap/ Bias circuits" line.long 0x4 "CTRL_SET,Control Register" bitfld.long 0x4 24.--25. "HV_LVD_MODE_CTRL_LV,HV LVD Mode Control" "0,1,2,3" newline bitfld.long 0x4 16.--17. "CORE_LVD_MODE_CTRL_LV,LVD Mode Control" "0,1,2,3" newline bitfld.long 0x4 8.--9. "CORE_HVD_MODE_CTRL_LV,HVD Mode Control" "0,1,2,3" newline bitfld.long 0x4 5. "HV_LVD_LATCH_CLEAR_LV,Control Bit for Clearing HV LVD Latch" "0,1" newline bitfld.long 0x4 4. "CORE_LVD_LATCH_CLEAR_LV,Control Bit for Clearing Core LVD Latch" "0,1" newline bitfld.long 0x4 3. "CORE_HVD_LATCH_CLEAR_LV,Control Bit for Clearing Core HVD Latch" "0,1" newline bitfld.long 0x4 2. "EN_BUF2_LV,Enable/Disable for vref2 Output Pin Buffer of 800 mV" "0,1" newline bitfld.long 0x4 1. "EN_BUF1_LV,Enable/Disable for vref1 Output Pin Buffer of 600 mV" "0,1" newline bitfld.long 0x4 0. "EN_LV,Enable DA_IP" "0,1" line.long 0x8 "CTRL_CLR,Control Register" eventfld.long 0x8 24.--25. "HV_LVD_MODE_CTRL_LV,HV LVD Mode Control" "0,1,2,3" newline eventfld.long 0x8 16.--17. "CORE_LVD_MODE_CTRL_LV,LVD Mode Control" "0,1,2,3" newline eventfld.long 0x8 8.--9. "CORE_HVD_MODE_CTRL_LV,HVD Mode Control" "0,1,2,3" newline eventfld.long 0x8 5. "HV_LVD_LATCH_CLEAR_LV,Control Bit for Clearing HV LVD Latch" "0,1" newline eventfld.long 0x8 4. "CORE_LVD_LATCH_CLEAR_LV,Control Bit for Clearing Core LVD Latch" "0,1" newline eventfld.long 0x8 3. "CORE_HVD_LATCH_CLEAR_LV,Control Bit for Clearing Core HVD Latch" "0,1" newline eventfld.long 0x8 2. "EN_BUF2_LV,Enable/Disable for vref2 Output Pin Buffer of 800 mV" "0,1" newline eventfld.long 0x8 1. "EN_BUF1_LV,Enable/Disable for vref1 Output Pin Buffer of 600 mV" "0,1" newline eventfld.long 0x8 0. "EN_LV,Enable DA_IP" "0,1" line.long 0xC "CTRL_TOG,Control Register" bitfld.long 0xC 24.--25. "HV_LVD_MODE_CTRL_LV,HV LVD Mode Control" "0,1,2,3" newline bitfld.long 0xC 16.--17. "CORE_LVD_MODE_CTRL_LV,LVD Mode Control" "0,1,2,3" newline bitfld.long 0xC 8.--9. "CORE_HVD_MODE_CTRL_LV,HVD Mode Control" "0,1,2,3" newline bitfld.long 0xC 5. "HV_LVD_LATCH_CLEAR_LV,Control Bit for Clearing HV LVD Latch" "0,1" newline bitfld.long 0xC 4. "CORE_LVD_LATCH_CLEAR_LV,Control Bit for Clearing Core LVD Latch" "0,1" newline bitfld.long 0xC 3. "CORE_HVD_LATCH_CLEAR_LV,Control Bit for Clearing Core HVD Latch" "0,1" newline bitfld.long 0xC 2. "EN_BUF2_LV,Enable/Disable for vref2 Output Pin Buffer of 800 mV" "0,1" newline bitfld.long 0xC 1. "EN_BUF1_LV,Enable/Disable for vref1 Output Pin Buffer of 600 mV" "0,1" newline bitfld.long 0xC 0. "EN_LV,Enable DA_IP" "0,1" line.long 0x10 "TRIM,Trim Control Register" hexmask.long.byte 0x10 16.--20. 1. "HV_LVD_TRIM_CTRL_LV,Core HV LVD Trim Control" newline hexmask.long.byte 0x10 8.--12. 1. "CORE_LVD_TRIM_CTRL_LV,Core LVD Trim Control" newline hexmask.long.byte 0x10 0.--4. 1. "CORE_HVD_TRIM_CTRL_LV,Core HVD Trim Control" line.long 0x14 "TRIM_SET,Trim Control Register" hexmask.long.byte 0x14 16.--20. 1. "HV_LVD_TRIM_CTRL_LV,Core HV LVD Trim Control" newline hexmask.long.byte 0x14 8.--12. 1. "CORE_LVD_TRIM_CTRL_LV,Core LVD Trim Control" newline hexmask.long.byte 0x14 0.--4. 1. "CORE_HVD_TRIM_CTRL_LV,Core HVD Trim Control" line.long 0x18 "TRIM_CLR,Trim Control Register" hexmask.long.byte 0x18 16.--20. 1. "HV_LVD_TRIM_CTRL_LV,Core HV LVD Trim Control" newline hexmask.long.byte 0x18 8.--12. 1. "CORE_LVD_TRIM_CTRL_LV,Core LVD Trim Control" newline hexmask.long.byte 0x18 0.--4. 1. "CORE_HVD_TRIM_CTRL_LV,Core HVD Trim Control" line.long 0x1C "TRIM_TOG,Trim Control Register" hexmask.long.byte 0x1C 16.--20. 1. "HV_LVD_TRIM_CTRL_LV,Core HV LVD Trim Control" newline hexmask.long.byte 0x1C 8.--12. 1. "CORE_LVD_TRIM_CTRL_LV,Core LVD Trim Control" newline hexmask.long.byte 0x1C 0.--4. 1. "CORE_HVD_TRIM_CTRL_LV,Core HVD Trim Control" rgroup.long 0x220++0xF line.long 0x0 "STATUS,Status Register" bitfld.long 0x0 24. "POWER_OK_LV,Power Ok Status" "0,1" newline bitfld.long 0x0 17. "HV_LVD_OUT_LATCH_LV,Latched HV LVD" "0,1" newline bitfld.long 0x0 16. "HV_LVD_OUT_LV,HV LVD" "0,1" newline bitfld.long 0x0 9. "CORE_LVD_OUT_LATCH_LV,Latched Core LVD at LV Supply" "0,1" newline bitfld.long 0x0 8. "CORE_LVD_OUT_LV,Core LVD at LV Supply" "0,1" newline bitfld.long 0x0 1. "CORE_HVD_OUT_LATCH_LV,Latched Core HVD at LV Supply" "0,1" newline bitfld.long 0x0 0. "CORE_HVD_OUT_LV,Core HVD at LV Supply" "0,1" line.long 0x4 "STATUS_SET,Status Register" bitfld.long 0x4 24. "POWER_OK_LV,Power Ok Status" "0,1" newline bitfld.long 0x4 17. "HV_LVD_OUT_LATCH_LV,Latched HV LVD" "0,1" newline bitfld.long 0x4 16. "HV_LVD_OUT_LV,HV LVD" "0,1" newline bitfld.long 0x4 9. "CORE_LVD_OUT_LATCH_LV,Latched Core LVD at LV Supply" "0,1" newline bitfld.long 0x4 8. "CORE_LVD_OUT_LV,Core LVD at LV Supply" "0,1" newline bitfld.long 0x4 1. "CORE_HVD_OUT_LATCH_LV,Latched Core HVD at LV Supply" "0,1" newline bitfld.long 0x4 0. "CORE_HVD_OUT_LV,Core HVD at LV Supply" "0,1" line.long 0x8 "STATUS_CLR,Status Register" eventfld.long 0x8 24. "POWER_OK_LV,Power Ok Status" "0,1" newline eventfld.long 0x8 17. "HV_LVD_OUT_LATCH_LV,Latched HV LVD" "0,1" newline eventfld.long 0x8 16. "HV_LVD_OUT_LV,HV LVD" "0,1" newline eventfld.long 0x8 9. "CORE_LVD_OUT_LATCH_LV,Latched Core LVD at LV Supply" "0,1" newline eventfld.long 0x8 8. "CORE_LVD_OUT_LV,Core LVD at LV Supply" "0,1" newline eventfld.long 0x8 1. "CORE_HVD_OUT_LATCH_LV,Latched Core HVD at LV Supply" "0,1" newline eventfld.long 0x8 0. "CORE_HVD_OUT_LV,Core HVD at LV Supply" "0,1" line.long 0xC "STATUS_TOG,Status Register" bitfld.long 0xC 24. "POWER_OK_LV,Power Ok Status" "0,1" newline bitfld.long 0xC 17. "HV_LVD_OUT_LATCH_LV,Latched HV LVD" "0,1" newline bitfld.long 0xC 16. "HV_LVD_OUT_LV,HV LVD" "0,1" newline bitfld.long 0xC 9. "CORE_LVD_OUT_LATCH_LV,Latched Core LVD at LV Supply" "0,1" newline bitfld.long 0xC 8. "CORE_LVD_OUT_LV,Core LVD at LV Supply" "0,1" newline bitfld.long 0xC 1. "CORE_HVD_OUT_LATCH_LV,Latched Core HVD at LV Supply" "0,1" newline bitfld.long 0xC 0. "CORE_HVD_OUT_LV,Core HVD at LV Supply" "0,1" tree.end tree.end tree "AON (Always-On Domain)" base ad:0x0 tree "AON_AXBS" base ad:0x44510000 group.long 0x0++0x3 line.long 0x0 "PRS0,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x10++0x3 line.long 0x0 "CRS0,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x100++0x3 line.long 0x0 "PRS1,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x110++0x3 line.long 0x0 "CRS1,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x200++0x3 line.long 0x0 "PRS2,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x210++0x3 line.long 0x0 "CRS2,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x300++0x3 line.long 0x0 "PRS3,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x310++0x3 line.long 0x0 "CRS3,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x400++0x3 line.long 0x0 "PRS4,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x410++0x3 line.long 0x0 "CRS4,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x500++0x3 line.long 0x0 "PRS5,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x510++0x3 line.long 0x0 "CRS5,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x600++0x3 line.long 0x0 "PRS6,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x610++0x3 line.long 0x0 "CRS6,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x700++0x3 line.long 0x0 "PRS7,Priority Slave Registers" bitfld.long 0x0 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." newline bitfld.long 0x0 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." bitfld.long 0x0 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8the or lowest priority.." newline bitfld.long 0x0 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or lowest priority when.." bitfld.long 0x0 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority when..,1: This master has level 2 priority when accessing..,2: This master has level 3 priority when accessing..,3: This master has level 4 priority when accessing..,4: This master has level 5 priority when accessing..,5: This master has level 6 priority when accessing..,6: This master has level 7 priority when accessing..,7: This master has level 8 or the lowest priority.." group.long 0x710++0x3 line.long 0x0 "CRS7,Control Register" bitfld.long 0x0 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x0 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7. is..,1: Master high-priority elevation for master 7. is.." newline bitfld.long 0x0 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6. is..,1: Master high-priority elevation for master 6. is.." bitfld.long 0x0 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5. is..,1: Master high-priority elevation for master 5. is.." newline bitfld.long 0x0 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4. is..,1: Master high-priority elevation for master 4. is.." bitfld.long 0x0 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3. is..,1: Master high-priority elevation for master 3. is.." newline bitfld.long 0x0 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2. is..,1: Master high-priority elevation for master 2. is.." bitfld.long 0x0 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1. is..,1: Master high-priority elevation for master 1. is.." newline bitfld.long 0x0 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0. is..,1: Master high-priority elevation for master 0. is.." bitfld.long 0x0 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?,?" newline bitfld.long 0x0 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter parks..,1: When no master makes a request the arbiter parks..,2: Low-power park. When no master makes a request..,?" bitfld.long 0x0 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" tree.end tree "AON_BLK_CTRL_NS_AONMIX" base ad:0x44210000 group.long 0x0++0x27 line.long 0x0 "GPC_CFG,GPC CORE SLEEP Request Select" bitfld.long 0x0 1. "M7_SLEEP_SEL,M7 SLEEP Request Select" "0,1" bitfld.long 0x0 0. "M33_SLEEP_SEL,M33 SLEEP Request Select" "0: Select SLEEPING as request source,1: Select SLEEPDEEP as request source" line.long 0x4 "UPPER_ADDR,UPPER ADDR BITS[35:32]" hexmask.long.byte 0x4 8.--11. 1. "mtr_master,address bit [35:32] for mtr_master" hexmask.long.byte 0x4 4.--7. 1. "edma1,address bit [35:32] for edma1" newline hexmask.long.byte 0x4 0.--3. 1. "sentinel,address bit [35:32] for sentinel" line.long 0x8 "IPG_DEBUG_CM33,IPG DEBUG MASK BIT for cm33" bitfld.long 0x8 15. "sys_ctr1,no description available" "0,1" bitfld.long 0x8 14. "pdm,no description available" "0,1" newline bitfld.long 0x8 13. "i3c1,no description available" "0,1" bitfld.long 0x8 12. "wdog2,no description available" "0,1" newline bitfld.long 0x8 11. "wdog1,no description available" "0,1" bitfld.long 0x8 10. "tpm2,no description available" "0,1" newline bitfld.long 0x8 9. "tpm1,no description available" "0,1" bitfld.long 0x8 8. "sai1,no description available" "0,1" newline bitfld.long 0x8 7. "lptmr1,no description available" "0,1" bitfld.long 0x8 6. "lpspi2,no description available" "0,1" newline bitfld.long 0x8 5. "lpspi1,no description available" "0,1" bitfld.long 0x8 4. "lpit1,no description available" "0,1" newline bitfld.long 0x8 3. "lpi2c2,no description available" "0,1" bitfld.long 0x8 2. "lpi2c1,no description available" "0,1" newline bitfld.long 0x8 1. "edma1,no description available" "0,1" bitfld.long 0x8 0. "can1,no description available" "0,1" line.long 0xC "IPG_DEBUG_CA55C0,IPG DEBUG MASK BIT CA55 CORE0" bitfld.long 0xC 14. "pdm,no description available" "0,1" bitfld.long 0xC 13. "i3c1,no description available" "0,1" newline bitfld.long 0xC 12. "wdog2,no description available" "0,1" bitfld.long 0xC 11. "wdog1,no description available" "0,1" newline bitfld.long 0xC 10. "tpm2,no description available" "0,1" bitfld.long 0xC 9. "tpm1,no description available" "0,1" newline bitfld.long 0xC 8. "sai1,no description available" "0,1" bitfld.long 0xC 7. "lptmr1,no description available" "0,1" newline bitfld.long 0xC 6. "lpspi2,no description available" "0,1" bitfld.long 0xC 5. "lpspi1,no description available" "0,1" newline bitfld.long 0xC 4. "lpit1,no description available" "0,1" bitfld.long 0xC 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0xC 2. "lpi2c1,no description available" "0,1" bitfld.long 0xC 1. "edma1,no description available" "0,1" newline bitfld.long 0xC 0. "can1,no description available" "0,1" line.long 0x10 "IPG_DEBUG_CA55C1,IPG DEBUG MASK BIT CA55 CORE0" bitfld.long 0x10 14. "pdm,no description available" "0,1" bitfld.long 0x10 13. "i3c1,no description available" "0,1" newline bitfld.long 0x10 12. "wdog2,no description available" "0,1" bitfld.long 0x10 11. "wdog1,no description available" "0,1" newline bitfld.long 0x10 10. "tpm2,no description available" "0,1" bitfld.long 0x10 9. "tpm1,no description available" "0,1" newline bitfld.long 0x10 8. "sai1,no description available" "0,1" bitfld.long 0x10 7. "lptmr1,no description available" "0,1" newline bitfld.long 0x10 6. "lpspi2,no description available" "0,1" bitfld.long 0x10 5. "lpspi1,no description available" "0,1" newline bitfld.long 0x10 4. "lpit1,no description available" "0,1" bitfld.long 0x10 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0x10 2. "lpi2c1,no description available" "0,1" bitfld.long 0x10 1. "edma1,no description available" "0,1" newline bitfld.long 0x10 0. "can1,no description available" "0,1" line.long 0x14 "IPG_DEBUG_CA55C2,IPG DEBUG MASK BIT CA55 CORE2" bitfld.long 0x14 14. "pdm,no description available" "0,1" bitfld.long 0x14 13. "i3c1,no description available" "0,1" newline bitfld.long 0x14 12. "wdog2,no description available" "0,1" bitfld.long 0x14 11. "wdog1,no description available" "0,1" newline bitfld.long 0x14 10. "tpm2,no description available" "0,1" bitfld.long 0x14 9. "tpm1,no description available" "0,1" newline bitfld.long 0x14 8. "sai1,no description available" "0,1" bitfld.long 0x14 7. "lptmr1,no description available" "0,1" newline bitfld.long 0x14 6. "lpspi2,no description available" "0,1" bitfld.long 0x14 5. "lpspi1,no description available" "0,1" newline bitfld.long 0x14 4. "lpit1,no description available" "0,1" bitfld.long 0x14 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0x14 2. "lpi2c1,no description available" "0,1" bitfld.long 0x14 1. "edma1,no description available" "0,1" newline bitfld.long 0x14 0. "can1,no description available" "0,1" line.long 0x18 "IPG_DEBUG_CA55C3,IPG DEBUG MASK BIT CA55 CORE3" bitfld.long 0x18 14. "pdm,no description available" "0,1" bitfld.long 0x18 13. "i3c1,no description available" "0,1" newline bitfld.long 0x18 12. "wdog2,no description available" "0,1" bitfld.long 0x18 11. "wdog1,no description available" "0,1" newline bitfld.long 0x18 10. "tpm2,no description available" "0,1" bitfld.long 0x18 9. "tpm1,no description available" "0,1" newline bitfld.long 0x18 8. "sai1,no description available" "0,1" bitfld.long 0x18 7. "lptmr1,no description available" "0,1" newline bitfld.long 0x18 6. "lpspi2,no description available" "0,1" bitfld.long 0x18 5. "lpspi1,no description available" "0,1" newline bitfld.long 0x18 4. "lpit1,no description available" "0,1" bitfld.long 0x18 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0x18 2. "lpi2c1,no description available" "0,1" bitfld.long 0x18 1. "edma1,no description available" "0,1" newline bitfld.long 0x18 0. "can1,no description available" "0,1" line.long 0x1C "IPG_DEBUG_CA55C4,IPG DEBUG MASK BIT CA55 CORE4" bitfld.long 0x1C 14. "pdm,no description available" "0,1" bitfld.long 0x1C 13. "i3c1,no description available" "0,1" newline bitfld.long 0x1C 12. "wdog2,no description available" "0,1" bitfld.long 0x1C 11. "wdog1,no description available" "0,1" newline bitfld.long 0x1C 10. "tpm2,no description available" "0,1" bitfld.long 0x1C 9. "tpm1,no description available" "0,1" newline bitfld.long 0x1C 8. "sai1,no description available" "0,1" bitfld.long 0x1C 7. "lptmr1,no description available" "0,1" newline bitfld.long 0x1C 6. "lpspi2,no description available" "0,1" bitfld.long 0x1C 5. "lpspi1,no description available" "0,1" newline bitfld.long 0x1C 4. "lpit1,no description available" "0,1" bitfld.long 0x1C 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0x1C 2. "lpi2c1,no description available" "0,1" bitfld.long 0x1C 1. "edma1,no description available" "0,1" newline bitfld.long 0x1C 0. "can1,no description available" "0,1" line.long 0x20 "IPG_DEBUG_CA55C5,IPG DEBUG MASK BIT CA55 CORE5" bitfld.long 0x20 14. "pdm,no description available" "0,1" bitfld.long 0x20 13. "i3c1,no description available" "0,1" newline bitfld.long 0x20 12. "wdog2,no description available" "0,1" bitfld.long 0x20 11. "wdog1,no description available" "0,1" newline bitfld.long 0x20 10. "tpm2,no description available" "0,1" bitfld.long 0x20 9. "tpm1,no description available" "0,1" newline bitfld.long 0x20 8. "sai1,no description available" "0,1" bitfld.long 0x20 7. "lptmr1,no description available" "0,1" newline bitfld.long 0x20 6. "lpspi2,no description available" "0,1" bitfld.long 0x20 5. "lpspi1,no description available" "0,1" newline bitfld.long 0x20 4. "lpit1,no description available" "0,1" bitfld.long 0x20 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0x20 2. "lpi2c1,no description available" "0,1" bitfld.long 0x20 1. "edma1,no description available" "0,1" newline bitfld.long 0x20 0. "can1,no description available" "0,1" line.long 0x24 "IPG_DEBUG_CM7,IPG DEBUG MASK BIT for cm7" bitfld.long 0x24 14. "pdm,no description available" "0,1" bitfld.long 0x24 13. "i3c1,no description available" "0,1" newline bitfld.long 0x24 12. "wdog2,no description available" "0,1" bitfld.long 0x24 11. "wdog1,no description available" "0,1" newline bitfld.long 0x24 10. "tpm2,no description available" "0,1" bitfld.long 0x24 9. "tpm1,no description available" "0,1" newline bitfld.long 0x24 8. "sai1,no description available" "0,1" bitfld.long 0x24 7. "lptmr1,no description available" "0,1" newline bitfld.long 0x24 6. "lpspi2,no description available" "0,1" bitfld.long 0x24 5. "lpspi1,no description available" "0,1" newline bitfld.long 0x24 4. "lpit1,no description available" "0,1" bitfld.long 0x24 3. "lpi2c2,no description available" "0,1" newline bitfld.long 0x24 2. "lpi2c1,no description available" "0,1" bitfld.long 0x24 1. "edma1,no description available" "0,1" newline bitfld.long 0x24 0. "can1,no description available" "0,1" rgroup.long 0x28++0x3 line.long 0x0 "FUSE_ACC_DIS,Read-only version of the OCOTP fuse-access-disable bit" bitfld.long 0x0 0. "OSCCA_FUSE_READ_DIS,1: SoC is not allowed to access the OCOTP registers 0: SoC is allowed to access the OCOTP registers" "0: SoC is allowed to access the OCOTP registers,1: SoC is not allowed to access the OCOTP registers" rgroup.long 0x30++0x3F line.long 0x0 "OCOTP_FUSE_DATA0,Read-only version of OCOTP fusedata_mtr_cfg_0" hexmask.long 0x0 0.--31. 1. "OCOTP_FUSE_DATA0,OCOTP_FUSE_DATA0" line.long 0x4 "OCOTP_FUSE_DATA1,Read-only version of OCOTP fusedata_mtr_cfg_1" hexmask.long 0x4 0.--31. 1. "OCOTP_FUSE_DATA1,OCOTP_FUSE_DATA1" line.long 0x8 "OCOTP_FUSE_DATA2,Read-only version of OCOTP fusedata_mtr_cfg_2" hexmask.long 0x8 0.--31. 1. "OCOTP_FUSE_DATA2,OCOTP_FUSE_DATA2" line.long 0xC "OCOTP_FUSE_DATA3,Read-only version of OCOTP fusedata_mtr_cfg_3" hexmask.long 0xC 0.--31. 1. "OCOTP_FUSE_DATA3,OCOTP_FUSE_DATA3" line.long 0x10 "OCOTP_FUSE_DATA4,Read-only version of OCOTP fusedata_mtr_cfg_4" hexmask.long 0x10 0.--31. 1. "OCOTP_FUSE_DATA4,OCOTP_FUSE_DATA4" line.long 0x14 "OCOTP_FUSE_DATA5,Read-only version of OCOTP fusedata_mtr_cfg_5" hexmask.long 0x14 0.--31. 1. "OCOTP_FUSE_DATA5,OCOTP_FUSE_DATA5" line.long 0x18 "OCOTP_FUSE_DATA6,Read-only version of OCOTP fusedata_mtr_cfg_6" hexmask.long 0x18 0.--31. 1. "OCOTP_FUSE_DATA6,OCOTP_FUSE_DATA6" line.long 0x1C "OCOTP_FUSE_DATA7,Read-only version of OCOTP fusedata_mtr_cfg_7" hexmask.long 0x1C 0.--31. 1. "OCOTP_FUSE_DATA7,OCOTP_FUSE_DATA7" line.long 0x20 "OCOTP_FUSE_DATA8,Read-only version of OCOTP fusedata_mem_trim_cfg0" hexmask.long 0x20 0.--31. 1. "OCOTP_FUSE_DATA8,OCOTP_FUSE_DATA8" line.long 0x24 "OCOTP_FUSE_DATA9,Read-only version of OCOTP fusedata_mem_trim_cfg1" hexmask.long 0x24 0.--31. 1. "OCOTP_FUSE_DATA9,OCOTP_FUSE_DATA9" line.long 0x28 "OCOTP_FUSE_DATA10,Read-only version of OCOTP fusedata_mem_trim_cfg2" hexmask.long 0x28 0.--31. 1. "OCOTP_FUSE_DATA10,OCOTP_FUSE_DATA10" line.long 0x2C "OCOTP_FUSE_DATA11,Read-only version of OCOTP fusedata_mem_trim_cfg3" hexmask.long 0x2C 0.--31. 1. "OCOTP_FUSE_DATA11,OCOTP_FUSE_DATA12" line.long 0x30 "OCOTP_FUSE_DATA12,Read-only version of OCOTP fusedata_mem_trim_cfg4" hexmask.long 0x30 0.--31. 1. "OCOTP_FUSE_DATA12,OCOTP_FUSE_DATA13" line.long 0x34 "OCOTP_FUSE_DATA13,Read-only version of OCOTP fusedata_mem_trim_cfg5" hexmask.long 0x34 0.--31. 1. "OCOTP_FUSE_DATA13,OCOTP_FUSE_DATA13" line.long 0x38 "OCOTP_FUSE_DATA14,Read-only version of OCOTP fusedata_mem_trim_cfg6" hexmask.long 0x38 0.--31. 1. "OCOTP_FUSE_DATA14,OCOTP_FUSE_DATA14" line.long 0x3C "OCOTP_FUSE_DATA15,Read-only version of OCOTP fusedata_mem_trim_cfg7" hexmask.long 0x3C 0.--31. 1. "OCOTP_FUSE_DATA15,OCOTP_FUSE_DATA15" group.long 0x70++0x3 line.long 0x0 "I3C1_WAKEUP,I3C1 WAKEUPX CLR" bitfld.long 0x0 0. "irq_clr,no description available" "0,1" rgroup.long 0x74++0x3 line.long 0x0 "OCOTP_STATUS,OCOTP status register" bitfld.long 0x0 0. "busy,OCOTP controller busy bit" "0,1" group.long 0x78++0xB line.long 0x0 "pdm_clk_sel,PDM clock selection register" bitfld.long 0x0 0. "sel,select source for pdm clock" "0,1" line.long 0x4 "I3C1_SDA_IRQ,I3C1 SDA IRQ CONTROL BIT" bitfld.long 0x4 0. "enable,IRQ enable bit" "0,1" line.long 0x8 "SSI,SSI master low power mode control" bitfld.long 0x8 1. "BLKHOLE_MODE_B,AONMIX SSI master blackhole mode" "0,1" rbitfld.long 0x8 0. "PAUSE_MODE,AONMIX SSI master pause mode" "0,1" rgroup.long 0x84++0x3 line.long 0x0 "fastboot_enable,fastboot enable" bitfld.long 0x0 2.--3. "BP_FASTBOOT_ENABLE,BP_FASTBOOT_ENABLE bits" "0,1,2,3" bitfld.long 0x0 0.--1. "FASTBOOT_ENABLE,FASTBOOT_ENABLE bits" "0,1,2,3" group.long 0x88++0x3 line.long 0x0 "MQS_Settings,Several MQS settings. include SAI selection. Enable. Software Reset. clock divide factor and Oversample." hexmask.long.byte 0x0 8.--15. 1. "CLK_DIVIDE,clock divide factor configuration" bitfld.long 0x0 3. "OVERSAMPLE,Oversample enable" "0,1" newline bitfld.long 0x0 2. "SOFT_RESET,Software Reset" "0,1" bitfld.long 0x0 1. "MQS_EN,MQS Enable" "0,1" rgroup.long 0x8C++0x7 line.long 0x0 "SENTINEL_FW_PRESENT,Read only bit for fuse SENTINEL_FW_PRESENT" bitfld.long 0x0 0. "sentinel_fw_present,no description available" "0,1" line.long 0x4 "AOMIX_SPARE_FUSE,Spare fuse register" bitfld.long 0x4 0.--1. "Spare_fuse,no description available" "0,1,2,3" tree.end tree "AON_BLK_CTRL_S_AONMIX" base ad:0x444F0000 group.long 0x0++0x2F line.long 0x0 "CM33_IRQ_MASK0,CM33_IRQ_MASK0" hexmask.long 0x0 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x4 "CM33_IRQ_MASK1,CM33_IRQ_MASK1" hexmask.long 0x4 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x8 "CM33_IRQ_MASK2,CM33_IRQ_MASK2" hexmask.long 0x8 0.--31. 1. "m,CM33 IRQ MASK" line.long 0xC "CM33_IRQ_MASK3,CM33_IRQ_MASK3" hexmask.long 0xC 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x10 "CM33_IRQ_MASK4,CM33_IRQ_MASK4" hexmask.long 0x10 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x14 "CM33_IRQ_MASK5,CM33_IRQ_MASK5" hexmask.long 0x14 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x18 "CM33_IRQ_MASK6,CM33_IRQ_MASK6" hexmask.long 0x18 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x1C "CM33_IRQ_MASK7,CM33_IRQ_MASK7" hexmask.long 0x1C 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x20 "CM33_IRQ_MASK8,CM33_IRQ_MASK8" hexmask.long 0x20 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x24 "CM33_IRQ_MASK9,CM33_IRQ_MASK9" hexmask.long 0x24 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x28 "CM33_IRQ_MASK10,CM33_IRQ_MASK10" hexmask.long 0x28 0.--31. 1. "m,CM33 IRQ MASK" line.long 0x2C "CM33_IRQ_MASK11,CM33_IRQ_MASK11" hexmask.long 0x2C 0.--31. 1. "m,CM33 IRQ MASK" group.long 0x40++0x2F line.long 0x0 "CA55_IRQ_MASK0,CA55_IRQ_MASK0" hexmask.long 0x0 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x4 "CA55_IRQ_MASK1,CA55_IRQ_MASK1" hexmask.long 0x4 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x8 "CA55_IRQ_MASK2,CA55_IRQ_MASK2" hexmask.long 0x8 0.--31. 1. "m,CA55 IRQ MASK" line.long 0xC "CA55_IRQ_MASK3,CA55_IRQ_MASK3" hexmask.long 0xC 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x10 "CA55_IRQ_MASK4,CA55_IRQ_MASK4" hexmask.long 0x10 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x14 "CA55_IRQ_MASK5,CA55_IRQ_MASK5" hexmask.long 0x14 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x18 "CA55_IRQ_MASK6,CA55_IRQ_MASK6" hexmask.long 0x18 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x1C "CA55_IRQ_MASK7,CA55_IRQ_MASK7" hexmask.long 0x1C 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x20 "CA55_IRQ_MASK8,CA55_IRQ_MASK8" hexmask.long 0x20 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x24 "CA55_IRQ_MASK9,CA55_IRQ_MASK9" hexmask.long 0x24 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x28 "CA55_IRQ_MASK10,CA55_IRQ_MASK10" hexmask.long 0x28 0.--31. 1. "m,CA55 IRQ MASK" line.long 0x2C "CA55_IRQ_MASK11,CA55_IRQ_MASK11" hexmask.long 0x2C 0.--31. 1. "m,CA55 IRQ MASK" group.long 0x80++0x2F line.long 0x0 "CM7_IRQ_MASK0,CM7_IRQ_MASK0" hexmask.long 0x0 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x4 "CM7_IRQ_MASK1,CM7_IRQ_MASK1" hexmask.long 0x4 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x8 "CM7_IRQ_MASK2,CM7_IRQ_MASK2" hexmask.long 0x8 0.--31. 1. "m,CM7 IRQ MASK" line.long 0xC "CM7_IRQ_MASK3,CM7_IRQ_MASK3" hexmask.long 0xC 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x10 "CM7_IRQ_MASK4,CM7_IRQ_MASK4" hexmask.long 0x10 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x14 "CM7_IRQ_MASK5,CM7_IRQ_MASK5" hexmask.long 0x14 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x18 "CM7_IRQ_MASK6,CM7_IRQ_MASK6" hexmask.long 0x18 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x1C "CM7_IRQ_MASK7,CM7_IRQ_MASK7" hexmask.long 0x1C 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x20 "CM7_IRQ_MASK8,CM7_IRQ_MASK8" hexmask.long 0x20 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x24 "CM7_IRQ_MASK9,CM7_IRQ_MASK9" hexmask.long 0x24 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x28 "CM7_IRQ_MASK10,CM7_IRQ_MASK10" hexmask.long 0x28 0.--31. 1. "m,CM7 IRQ MASK" line.long 0x2C "CM7_IRQ_MASK11,CM7_IRQ_MASK11" hexmask.long 0x2C 0.--31. 1. "m,CM7 IRQ MASK" group.long 0x100++0xB line.long 0x0 "INITSVTOR,M33 restart secure address" hexmask.long 0x0 0.--31. 1. "m33,INITSVTOR" line.long 0x4 "INITNSVTOR,M33 restart non-secure address" hexmask.long 0x4 0.--31. 1. "m33,INITSVTOR" line.long 0x8 "INITVTOR,M7restart address" hexmask.long 0x8 7.--31. 1. "M7,INITVTOR address of m7" group.long 0x120++0x7 line.long 0x0 "M33_CFG,M33 Configure Register" bitfld.long 0x0 3.--4. "TCM_SIZE,M33 TCM SIZE" "0: Regular TCM 256KB Code TCM and 256KB Sys TCM,1: Double Code TCM 512KB Code TCM,2: Double Sys TCM 512KB Sys TCM,?" bitfld.long 0x0 2. "WAIT,M33 CPU WAIT" "0,1" line.long 0x4 "M7_CFG,M7 Configure Register" bitfld.long 0x4 6. "HCLK_FORCE_ON,CM7 platform AHB clock enable" "0,1" bitfld.long 0x4 5. "CORECLK_FORCE_ON,Force CM7 core clock on in WAIT mode" "0,1" bitfld.long 0x4 4. "WAIT,M7 CPUWAIT" "0,1" newline bitfld.long 0x4 0.--2. "TCM_SIZE,M7 TCM SIZE" "0,1,2,3,4,5,6,7" group.long 0x130++0x23 line.long 0x0 "AXBS_AON_CTRL,AXBS_AON_CTRL" bitfld.long 0x0 7. "M6_HIGH_PRIORITY,M6 High Priority Control Bit" "0,1" bitfld.long 0x0 6. "M5_HIGH_PRIORITY,M5 High Priority Control Bit" "0,1" bitfld.long 0x0 5. "M4_HIGH_PRIORITY,M4 High Priority Control Bit" "0,1" newline bitfld.long 0x0 4. "M3_HIGH_PRIORITY,M3 High Priority Control Bit" "0,1" bitfld.long 0x0 3. "M2_HIGH_PRIORITY,M2 High Priority Control Bit" "0,1" bitfld.long 0x0 2. "M1_HIGH_PRIORITY,M1 High Priority Control Bit" "0,1" newline bitfld.long 0x0 1. "M0_HIGH_PRIORITY,M0 High Priority Control Bit" "0,1" bitfld.long 0x0 0. "FORCE_ROUND_ROBIN,AXBS_AON FORCE_ROUND_ROBIN" "0,1" line.long 0x4 "DAP_ACCESS_STKYBIT,Dap Access Sticky Bit" bitfld.long 0x4 1. "A55,A55 DAP_ACCESS_STKYBIT" "0,1" bitfld.long 0x4 0. "M33,M33 DAP_ACCESS_STKYBIT" "0,1" line.long 0x8 "LP_HANDSHAKE_SENTINEL,low power handshake enable register for sentinel" hexmask.long 0x8 0.--31. 1. "ENABLE,lowpower handshake enable" line.long 0xC "LP_HANDSHAKE2_SENTINEL,low power handshake enable register for sentinel" hexmask.long 0xC 0.--31. 1. "ENABLE,no description available" line.long 0x10 "LP_HANDSHAKE3_SENTINEL,low power handshake enable register for sentinel" hexmask.long 0x10 0.--31. 1. "ENABLE,no description available" line.long 0x14 "LP_HANDSHAKE_SM,low power handshake enable register for sentinel" hexmask.long 0x14 0.--31. 1. "ENABLE,no description available" line.long 0x18 "LP_HANDSHAKE2_SM,low power handshake enable register for sentinel" hexmask.long 0x18 0.--31. 1. "ENABLE,no description available" line.long 0x1C "LP_HANDSHAKE3_SM,low power handshake enable register for sentinel" hexmask.long 0x1C 0.--31. 1. "ENABLE,no description available" line.long 0x20 "sm_lp_handshake_status,Register interface for system manager to react for the lp_handshake" bitfld.long 0x20 9. "autoack,auto acknowlage enble bit" "0,1" hexmask.long.byte 0x20 2.--8. 1. "idx,id of the active lp request" rbitfld.long 0x20 1. "stat,Status for clock/reset/power" "0,1" newline bitfld.long 0x20 0. "ack,acknowledge for the lp request" "0,1" group.long 0x160++0x33 line.long 0x0 "CA55_CPUWAIT,CPUWAIT settings for CA55 CPU" bitfld.long 0x0 5. "CPU5_WAIT,CPU1_WAIT" "0,1" bitfld.long 0x0 4. "CPU4_WAIT,CPU0_WAIT" "0,1" bitfld.long 0x0 3. "CPU3_WAIT,no description available" "0,1" newline bitfld.long 0x0 2. "CPU2_WAIT,no description available" "0,1" bitfld.long 0x0 1. "CPU1_WAIT,no description available" "0,1" bitfld.long 0x0 0. "CPU0_WAIT,no description available" "0,1" line.long 0x4 "CA55_RVBARADDR0_L,CA55_RVBARADDR0_L" hexmask.long 0x4 0.--31. 1. "ADDR0_L,no description available" line.long 0x8 "CA55_RVBARADDR0_H,CA55_RVBARADDR0_H" hexmask.long.byte 0x8 0.--5. 1. "ADDR0_H,higher 6 bits of the boot address of CA55 core0 in 64bit mode" line.long 0xC "CA55_RVBARADDR1_L,CA55_RVBARADDR1_L" hexmask.long 0xC 0.--31. 1. "ADDR1_L,CA55_RVBARADDR1_L" line.long 0x10 "CA55_RVBARADDR1_H,CA55_RVBARADDR1_H" hexmask.long.byte 0x10 0.--5. 1. "ADDR1_H,CA55_RVBARADDR1_H" line.long 0x14 "CA55_RVBARADDR2_L,CA55_RVBARADDR2_L" hexmask.long 0x14 0.--31. 1. "ADDR2_L,CA55_RVBARADDR2_L" line.long 0x18 "CA55_RVBARADDR2_H,CA55_RVBARADDR2_H" hexmask.long.byte 0x18 0.--5. 1. "ADDR2_H,CA55_RVBARADDR2_H" line.long 0x1C "CA55_RVBARADDR3_L,CA55_RVBARADDR3_L" hexmask.long 0x1C 0.--31. 1. "ADDR3_L,CA55_RVBARADDR3_L" line.long 0x20 "CA55_RVBARADDR3_H,CA55_RVBARADDR3_H" hexmask.long.byte 0x20 0.--5. 1. "ADDR3_H,CA55_RVBARADDR3_H" line.long 0x24 "CA55_RVBARADDR4_L,CA55_RVBARADDR4_L" hexmask.long 0x24 0.--31. 1. "ADDR4_L,CA55_RVBARADDR4_L" line.long 0x28 "CA55_RVBARADDR4_H,CA55_RVBARADDR4_H" hexmask.long.byte 0x28 0.--5. 1. "ADDR4_H,CA55_RVBARADDR4_H" line.long 0x2C "CA55_RVBARADDR5_L,CA55_RVBARADDR5_L" hexmask.long 0x2C 0.--31. 1. "ADDR5_L,CA55_RVBARADDR5_L" line.long 0x30 "CA55_RVBARADDR5_H,CA55_RVBARADDR5_H" hexmask.long.byte 0x30 0.--5. 1. "ADDR5_H,CA55_RVBARADDR5_H" group.long 0x1A0++0x1F line.long 0x0 "S401_IRQ_MASK,Mask bits of S401 interrupt" bitfld.long 0x0 8. "wdg_reset,no description available" "0,1" bitfld.long 0x0 7. "puf_reset,no description available" "0,1" bitfld.long 0x0 6. "lc_bricked,no description available" "0,1" newline bitfld.long 0x0 5. "lmda_sys_fail,no description available" "0,1" bitfld.long 0x0 4. "noclk_32k,no description available" "0,1" bitfld.long 0x0 3. "lmda_reset_req,no description available" "0,1" newline bitfld.long 0x0 2. "lmda_32k_reset_req,no description available" "0,1" bitfld.long 0x0 1. "noclk_ref1,no description available" "0,1" bitfld.long 0x0 0. "noclk_ref2,no description available" "0,1" line.long 0x4 "S401_RESET_REQ_MASK,Mask bits of S401 reset" bitfld.long 0x4 8. "wdg_reset,no description available" "0,1" bitfld.long 0x4 7. "puf_reset,no description available" "0,1" bitfld.long 0x4 6. "lc_bricked,no description available" "0,1" newline bitfld.long 0x4 5. "lmda_sys_fail,no description available" "0,1" bitfld.long 0x4 4. "noclk_32k,no description available" "0,1" bitfld.long 0x4 3. "lmda_reset_req,no description available" "0,1" newline bitfld.long 0x4 2. "lmda_32k_reset_req,no description available" "0,1" bitfld.long 0x4 1. "noclk_ref1,no description available" "0,1" bitfld.long 0x4 0. "noclk_ref2,no description available" "0,1" line.long 0x8 "S401_HALT_ST,S401 halt status register" bitfld.long 0x8 8. "S401_HALT_EXIT_IRQ_CLR,no description available" "0,1" rbitfld.long 0x8 0. "S401_HALT_ACK,no description available" "0,1" line.long 0xC "CA55_MODE,Control the boot mode of two ca55 cores" hexmask.long.byte 0xC 0.--5. 1. "AA64nAA32,core0 initial mode control bit" line.long 0x10 "NMI_MASK,NMI MASK bits" bitfld.long 0x10 1. "CM7,no description available" "0,1" bitfld.long 0x10 0. "CM33,CM33 NMI mask bit" "0,1" line.long 0x14 "NMI_CLR,NMI clear bit" hexmask.long 0x14 2.--31. 1. "RSVD,no description available" bitfld.long 0x14 1. "CM7,no description available" "0,1" bitfld.long 0x14 0. "CM33,NMI clear bit" "0,1" line.long 0x18 "wdog_any_mask,Wdog any mask" bitfld.long 0x18 4. "wdog5,wdog5 to wdog_any mask bit" "0,1" bitfld.long 0x18 3. "wdog4,wdog4 to wdog_any mask bit" "0,1" bitfld.long 0x18 2. "wdog3,wdog3 to wdog_any mask bit" "0,1" newline bitfld.long 0x18 1. "wdog2,wdog2 to wdog_any mask bit" "0,1" bitfld.long 0x18 0. "wdog1,wdog1 to wdog_any mask bit" "0,1" line.long 0x1C "s4v1_ipi_noclk_ref1,s4v1_ipi_noclk_ref1 clear register" bitfld.long 0x1C 0. "slow_clear,clear the interrupt" "0,1" tree.end tree "AON_CAN_FD" base ad:0x443A0000 group.long 0x0++0xB line.long 0x0 "MCR,Module Configuration Register" bitfld.long 0x0 31. "MDIS,Module Disable" "0: Enable the FlexCAN module.,1: Disable the FlexCAN module." bitfld.long 0x0 30. "FRZ,Freeze Enable" "0: Not enabled to enter Freeze mode.,1: Enabled to enter Freeze mode." newline bitfld.long 0x0 29. "RFEN,Legacy Rx FIFO Enable" "0: Legacy Rx FIFO not enabled.,1: Legacy Rx FIFO enabled." bitfld.long 0x0 28. "HALT,Halt FlexCAN" "0: No Freeze mode request.,1: Enters Freeze mode if the FRZ bit is asserted." newline rbitfld.long 0x0 27. "NOTRDY,FlexCAN Not Ready" "0: FlexCAN module is either in Normal mode..,1: FlexCAN module is either in Disable mode Doze.." bitfld.long 0x0 26. "WAKMSK,Wake Up Interrupt Mask" "0: Wake Up interrupt is disabled.,1: Wake Up interrupt is enabled." newline bitfld.long 0x0 25. "SOFTRST,Soft Reset" "0: No reset request.,1: Resets the registers affected by soft reset." rbitfld.long 0x0 24. "FRZACK,Freeze Mode Acknowledge" "0: FlexCAN not in Freeze mode prescaler running.,1: FlexCAN in Freeze mode prescaler stopped." newline bitfld.long 0x0 23. "SUPV,Supervisor Mode" "0: FlexCAN is in User mode. Affected registers..,1: FlexCAN is in Supervisor mode. Affected.." bitfld.long 0x0 22. "SLFWAK,Self Wake Up" "0: FlexCAN Self Wake Up feature is disabled.,1: FlexCAN Self Wake Up feature is enabled." newline bitfld.long 0x0 21. "WRNEN,Warning Interrupt Enable" "0: TWRNINT and RWRNINT bits are zero independent of..,1: TWRNINT and RWRNINT bits are set when the.." rbitfld.long 0x0 20. "LPMACK,Low-Power Mode Acknowledge" "0: FlexCAN is not in a low-power mode.,1: FlexCAN is in a low-power mode." newline bitfld.long 0x0 19. "WAKSRC,Wake Up Source" "0: FlexCAN uses the unfiltered Rx input to detect..,1: FlexCAN uses the filtered Rx input to detect.." bitfld.long 0x0 18. "DOZE,Doze Mode Enable" "0: FlexCAN is not enabled to enter low-power mode..,1: FlexCAN is enabled to enter low-power mode when.." newline bitfld.long 0x0 17. "SRXDIS,Self Reception Disable" "0: Self-reception enabled.,1: Self-reception disabled." bitfld.long 0x0 16. "IRMQ,Individual Rx Masking And Queue Enable" "0: Individual Rx masking and queue feature are..,1: Individual Rx masking and queue feature are.." newline bitfld.long 0x0 15. "DMA,DMA Enable" "0: DMA feature for Legacy RX FIFO or Enhanced Rx..,1: DMA feature for Legacy RX FIFO or Enhanced Rx.." bitfld.long 0x0 13. "LPRIOEN,Local Priority Enable" "0: Local Priority disabled.,1: Local Priority enabled." newline bitfld.long 0x0 12. "AEN,Abort Enable" "0: Abort disabled.,1: Abort enabled." bitfld.long 0x0 11. "FDEN,CAN FD operation enable" "0: CAN FD is disabled. FlexCAN is able to receive..,1: CAN FD is enabled. FlexCAN is able to receive.." newline bitfld.long 0x0 8.--9. "IDAM,ID Acceptance Mode" "0: Format A: One full ID (standard and extended)..,1: Format B: Two full standard IDs or two partial..,2: Format C: Four partial 8-bit standard IDs per ID..,3: Format D: All frames rejected." hexmask.long.byte 0x0 0.--6. 1. "MAXMB,Number Of The Last Message Buffer" line.long 0x4 "CTRL1,Control 1 Register" hexmask.long.byte 0x4 24.--31. 1. "PRESDIV,Prescaler Division Factor" bitfld.long 0x4 22.--23. "RJW,Resync Jump Width" "0,1,2,3" newline bitfld.long 0x4 19.--21. "PSEG1,Phase Segment 1" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PSEG2,Phase Segment 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 15. "BOFFMSK,Bus Off Interrupt Mask" "0: Bus Off interrupt disabled.,1: Bus Off interrupt enabled." bitfld.long 0x4 14. "ERRMSK,Error Interrupt Mask" "0: Error interrupt disabled.,1: Error interrupt enabled." newline bitfld.long 0x4 12. "LPB,Loop Back Mode" "0: Loop Back disabled.,1: Loop Back enabled." bitfld.long 0x4 11. "TWRNMSK,Tx Warning Interrupt Mask" "0: Tx Warning interrupt disabled.,1: Tx Warning interrupt enabled." newline bitfld.long 0x4 10. "RWRNMSK,Rx Warning Interrupt Mask" "0: Rx Warning interrupt disabled.,1: Rx Warning interrupt enabled." bitfld.long 0x4 7. "SMP,CAN Bit Sampling" "0: Just one sample is used to determine the bit..,1: Three samples are used to determine the value of.." newline bitfld.long 0x4 6. "BOFFREC,Bus Off Recovery" "0: Automatic recovering from Bus Off state enabled.,1: Automatic recovering from Bus Off state disabled." bitfld.long 0x4 5. "TSYN,Timer Sync" "0: Timer sync feature disabled,1: Timer sync feature enabled" newline bitfld.long 0x4 4. "LBUF,Lowest Buffer Transmitted First" "0: Buffer with highest priority is transmitted first.,1: Lowest number buffer is transmitted first." bitfld.long 0x4 3. "LOM,Listen-Only Mode" "0: Listen-Only mode is deactivated.,1: FlexCAN module operates in Listen-Only mode." newline bitfld.long 0x4 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7" line.long 0x8 "TIMER,Free Running Timer" hexmask.long.word 0x8 0.--15. 1. "TIMER,Timer Value" group.long 0x10++0x27 line.long 0x0 "RXMGMASK,Rx Mailboxes Global Mask Register" hexmask.long 0x0 0.--31. 1. "MG,Rx Mailboxes Global Mask Bits" line.long 0x4 "RX14MASK,Rx 14 Mask Register" hexmask.long 0x4 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits" line.long 0x8 "RX15MASK,Rx 15 Mask Register" hexmask.long 0x8 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits" line.long 0xC "ECR,Error Counter" hexmask.long.byte 0xC 24.--31. 1. "RXERRCNT_FAST,Receive Error Counter for fast bits" hexmask.long.byte 0xC 16.--23. 1. "TXERRCNT_FAST,Transmit Error Counter for fast bits" newline hexmask.long.byte 0xC 8.--15. 1. "RXERRCNT,Receive Error Counter" hexmask.long.byte 0xC 0.--7. 1. "TXERRCNT,Transmit Error Counter" line.long 0x10 "ESR1,Error and Status 1 Register" rbitfld.long 0x10 31. "BIT1ERR_FAST,Bit1 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as recessive is received.." rbitfld.long 0x10 30. "BIT0ERR_FAST,Bit0 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." newline rbitfld.long 0x10 28. "CRCERR_FAST,Cyclic Redundancy Check Error in the CRC field of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 27. "FRMERR_FAST,Form Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A form error occurred since last read of this.." newline rbitfld.long 0x10 26. "STFERR_FAST,Stuffing Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A stuffing error occurred since last read of.." eventfld.long 0x10 21. "ERROVR,Error Overrun" "0: Overrun has not occurred.,1: Overrun has occurred." newline eventfld.long 0x10 20. "ERRINT_FAST,Error interrupt for errors detected in Data Phase of CAN FD frames with BRS bit set" "0: No such occurrence.,1: Indicates setting of any error bit detected in.." eventfld.long 0x10 19. "BOFFDONEINT,Bus Off Done Interrupt" "0: No such occurrence.,1: FlexCAN module has completed Bus Off process." newline rbitfld.long 0x10 18. "SYNCH,CAN Synchronization Status" "0: FlexCAN is not synchronized to the CAN bus.,1: FlexCAN is synchronized to the CAN bus." eventfld.long 0x10 17. "TWRNINT,Tx Warning Interrupt Flag" "0: No such occurrence.,1: The Tx error counter transitioned from less than.." newline eventfld.long 0x10 16. "RWRNINT,Rx Warning Interrupt Flag" "0: No such occurrence.,1: The Rx error counter transitioned from less than.." rbitfld.long 0x10 15. "BIT1ERR,Bit1 Error" "0: No such occurrence.,1: At least one bit sent as recessive is received.." newline rbitfld.long 0x10 14. "BIT0ERR,Bit0 Error" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." rbitfld.long 0x10 13. "ACKERR,Acknowledge Error" "0: No such occurrence.,1: An ACK error occurred since last read of this.." newline rbitfld.long 0x10 12. "CRCERR,Cyclic Redundancy Check Error" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 11. "FRMERR,Form Error" "0: No such occurrence.,1: A Form Error occurred since last read of this.." newline rbitfld.long 0x10 10. "STFERR,Stuffing Error" "0: No such occurrence.,1: A stuffing error occurred since last read of.." rbitfld.long 0x10 9. "TXWRN,TX Error Warning" "0: No such occurrence.,1: TXERRCNT is greater than or equal to 96." newline rbitfld.long 0x10 8. "RXWRN,Rx Error Warning" "0: No such occurrence.,1: RXERRCNT is greater than or equal to 96." rbitfld.long 0x10 7. "IDLE,IDLE" "0: No such occurrence.,1: CAN bus is now IDLE." newline rbitfld.long 0x10 6. "TX,FlexCAN In Transmission" "0: FlexCAN is not transmitting a message.,1: FlexCAN is transmitting a message." rbitfld.long 0x10 4.--5. "FLTCONF,Fault Confinement State" "0: Bus Off,1: Error Passive,2: Bus Off,3: Bus Off" newline rbitfld.long 0x10 3. "RX,FlexCAN In Reception" "0: FlexCAN is not receiving a message.,1: FlexCAN is receiving a message." eventfld.long 0x10 2. "BOFFINT,Bus Off Interrupt" "0: No such occurrence.,1: FlexCAN module entered Bus Off state." newline eventfld.long 0x10 1. "ERRINT,Error Interrupt" "0: No such occurrence.,1: Indicates setting of any error bit in the Error.." eventfld.long 0x10 0. "WAKINT,Wake-Up Interrupt" "0: No such occurrence.,1: Indicates a recessive to dominant transition was.." line.long 0x14 "IMASK2,Interrupt Masks 2 Register" hexmask.long 0x14 0.--31. 1. "BUF63TO32M,Buffer MBi Mask" line.long 0x18 "IMASK1,Interrupt Masks 1 Register" hexmask.long 0x18 0.--31. 1. "BUF31TO0M,Buffer MBi Mask" line.long 0x1C "IFLAG2,Interrupt Flags 2 Register" hexmask.long 0x1C 0.--31. 1. "BUF63TO32I,Buffer MBi Interrupt" line.long 0x20 "IFLAG1,Interrupt Flags 1 Register" hexmask.long.tbyte 0x20 8.--31. 1. "BUF31TO8I,Buffer MBi Interrupt" eventfld.long 0x20 7. "BUF7I,Buffer MB7 Interrupt Or Legacy Rx FIFO Overflow" "0: No occurrence of MB7 completing..,1: MB7 completed transmission/reception when.." newline eventfld.long 0x20 6. "BUF6I,Buffer MB6 Interrupt Or Legacy Rx FIFO Warning" "0: No occurrence of MB6 completing..,1: MB6 completed transmission/reception when.." eventfld.long 0x20 5. "BUF5I,Buffer MB5 Interrupt Or Frames available in Legacy Rx FIFO" "0: No occurrence of MB5 completing..,1: MB5 completed transmission/reception when.." newline hexmask.long.byte 0x20 1.--4. 1. "BUF4TO1I,Buffer MBi Interrupt Or Reserved" eventfld.long 0x20 0. "BUF0I,Buffer MB0 Interrupt Or Clear Legacy FIFO bit" "0: The corresponding buffer has no occurrence of..,1: The corresponding buffer has successfully.." line.long 0x24 "CTRL2,Control 2 Register" bitfld.long 0x24 31. "ERRMSK_FAST,Error Interrupt Mask for errors detected in the data phase of fast CAN FD frames" "0: ERRINT_FAST error interrupt disabled.,1: ERRINT_FAST error interrupt enabled." bitfld.long 0x24 30. "BOFFDONEMSK,Bus Off Done Interrupt Mask" "0: Bus off done interrupt disabled.,1: Bus off done interrupt enabled." newline bitfld.long 0x24 29. "ECRWRE,Error-correction Configuration Register Write Enable" "0: Disable update.,1: Enable update." bitfld.long 0x24 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0: Maintain the write access restrictions.,1: Enable unrestricted write access to FlexCAN.." newline hexmask.long.byte 0x24 24.--27. 1. "RFFN,Number Of Legacy Rx FIFO Filters" hexmask.long.byte 0x24 19.--23. 1. "TASD,Tx Arbitration Start Delay" newline bitfld.long 0x24 18. "MRP,Mailboxes Reception Priority" "0: Matching starts from Legacy Rx FIFO or Enhanced..,1: Matching starts from mailboxes and continues on.." bitfld.long 0x24 17. "RRS,Remote Request Storing" "0: Remote response frame is generated.,1: Remote request frame is stored." newline bitfld.long 0x24 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0: Rx mailbox filter's IDE bit is always compared..,1: Enables the comparison of both Rx mailbox.." bitfld.long 0x24 15. "TIMER_SRC,Timer Source" "0: The free running timer is clocked by the CAN bit..,1: The free running timer is clocked by an external.." newline bitfld.long 0x24 14. "PREXCEN,Protocol Exception Enable" "0: Protocol exception is disabled.,1: Protocol exception is enabled." bitfld.long 0x24 13. "BTE,Bit Timing Expansion enable" "0: CAN Bit timing expansion is disabled.,1: CAN bit timing expansion is enabled." newline bitfld.long 0x24 12. "ISOCANFDEN,ISO CAN FD Enable" "0: FlexCAN operates using the non-ISO CAN FD..,1: FlexCAN operates using the ISO CAN FD protocol.." bitfld.long 0x24 11. "EDFLTDIS,Edge Filter Disable" "0: Edge filter is enabled,1: Edge filter is disabled" newline bitfld.long 0x24 8.--9. "MBTSBASE,Message Buffer Time Stamp Base" "0: Message buffer time stamp base is TIMER,1: Message buffer time stamp base is lower 16 bits..,2: Message buffer time stamp base is upper 16 bits..,?" bitfld.long 0x24 6.--7. "TSTAMPCAP,Time Stamp Capture Point" "0: The high resolution time stamp capture is disabled,1: The high resolution time stamp is captured in..,2: The high resolution time stamp is captured in..,3: The high resolution time stamp is captured in.." rgroup.long 0x38++0x3 line.long 0x0 "ESR2,Error and Status 2 Register" hexmask.long.byte 0x0 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox" bitfld.long 0x0 14. "VPS,Valid Priority Status" "0: Contents of IMB and LPTM are invalid.,1: Contents of IMB and LPTM are valid." newline bitfld.long 0x0 13. "IMB,Inactive Mailbox" "0: If ESR2[VPS] is asserted the ESR2[LPTM] is not..,1: If ESR2[VPS] is asserted there is at least one.." rgroup.long 0x44++0x3 line.long 0x0 "CRCR,CRC Register" hexmask.long.byte 0x0 16.--22. 1. "MBCRC,CRC Mailbox" hexmask.long.word 0x0 0.--14. 1. "TXCRC,Transmitted CRC value" group.long 0x48++0x3 line.long 0x0 "RXFGMASK,Legacy Rx FIFO Global Mask Register" hexmask.long 0x0 0.--31. 1. "FGM,Legacy Rx FIFO Global Mask Bits" rgroup.long 0x4C++0x3 line.long 0x0 "RXFIR,Legacy Rx FIFO Information Register" hexmask.long.word 0x0 0.--8. 1. "IDHIT,Identifier Acceptance Filter Hit Indicator" group.long 0x50++0x3 line.long 0x0 "CBT,CAN Bit Timing Register" bitfld.long 0x0 31. "BTF,Bit Timing Format Enable" "0: Extended bit time definitions disabled.,1: Extended bit time definitions enabled." hexmask.long.word 0x0 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor" newline hexmask.long.byte 0x0 16.--20. 1. "ERJW,Extended Resync Jump Width" hexmask.long.byte 0x0 10.--15. 1. "EPROPSEG,Extended Propagation Segment" newline hexmask.long.byte 0x0 5.--9. 1. "EPSEG1,Extended Phase Segment 1" hexmask.long.byte 0x0 0.--4. 1. "EPSEG2,Extended Phase Segment 2" group.long 0x6C++0x3 line.long 0x0 "IMASK3,Interrupt Masks 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64M,Buffer MBi Mask" group.long 0x74++0x3 line.long 0x0 "IFLAG3,Interrupt Flags 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64,Buffer MBi Interrupt" group.long 0x80++0x3 line.long 0x0 "CS0,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_16B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_32B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_64B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x7 line.long 0x0 "MB0_8B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID0,Message Buffer 0 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_16B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_32B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_64B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x7 line.long 0x0 "MB0_8B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_16B_WORD0,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_32B_WORD0,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_64B_WORD0,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_8B_WORD0,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x7 line.long 0x0 "WORD00,Message Buffer 0 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_16B_WORD1,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_32B_WORD1,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_64B_WORD1,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_8B_WORD1,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x7 line.long 0x0 "WORD10,Message Buffer 0 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS1,Message Buffer 1 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x90++0x3 line.long 0x0 "MB0_16B_WORD2,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_32B_WORD2,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_64B_WORD2,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x7 line.long 0x0 "MB1_8B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID1,Message Buffer 1 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x94++0x3 line.long 0x0 "MB0_16B_WORD3,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_32B_WORD3,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_64B_WORD3,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x7 line.long 0x0 "MB1_8B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_32B_WORD4,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB0_64B_WORD4,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB1_16B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x98++0x3 line.long 0x0 "MB1_8B_WORD0,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x98++0x7 line.long 0x0 "WORD01,Message Buffer 1 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_32B_WORD5,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB0_64B_WORD5,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB1_16B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x9C++0x3 line.long 0x0 "MB1_8B_WORD1,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x7 line.long 0x0 "WORD11,Message Buffer 1 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS2,Message Buffer 2 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA0++0x3 line.long 0x0 "MB0_32B_WORD6,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB0_64B_WORD6,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB1_16B_WORD0,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x7 line.long 0x0 "MB2_8B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID2,Message Buffer 2 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xA4++0x3 line.long 0x0 "MB0_32B_WORD7,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB0_64B_WORD7,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB1_16B_WORD1,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x7 line.long 0x0 "MB2_8B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD8,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_16B_WORD2,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_32B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA8++0x3 line.long 0x0 "MB2_8B_WORD0,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x7 line.long 0x0 "WORD02,Message Buffer 2 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD9,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_16B_WORD3,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_32B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xAC++0x3 line.long 0x0 "MB2_8B_WORD1,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x7 line.long 0x0 "WORD12,Message Buffer 2 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS3,Message Buffer 3 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x3 line.long 0x0 "MB0_64B_WORD10,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB1_32B_WORD0,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB2_16B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x7 line.long 0x0 "MB3_8B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID3,Message Buffer 3 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x3 line.long 0x0 "MB0_64B_WORD11,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB1_32B_WORD1,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB2_16B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x7 line.long 0x0 "MB3_8B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD12,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB1_32B_WORD2,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB2_16B_WORD0,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB3_8B_WORD0,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x7 line.long 0x0 "WORD03,Message Buffer 3 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD13,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB1_32B_WORD3,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB2_16B_WORD1,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB3_8B_WORD1,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x7 line.long 0x0 "WORD13,Message Buffer 3 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS4,Message Buffer 4 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC0++0x3 line.long 0x0 "MB0_64B_WORD14,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB1_32B_WORD4,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB2_16B_WORD2,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x7 line.long 0x0 "MB4_8B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID4,Message Buffer 4 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xC4++0x3 line.long 0x0 "MB0_64B_WORD15,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB1_32B_WORD5,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB2_16B_WORD3,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x7 line.long 0x0 "MB4_8B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_32B_WORD6,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x3 line.long 0x0 "MB1_64B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB3_16B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB4_8B_WORD0,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x7 line.long 0x0 "WORD04,Message Buffer 4 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_32B_WORD7,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x3 line.long 0x0 "MB1_64B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB3_16B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB4_8B_WORD1,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x7 line.long 0x0 "WORD14,Message Buffer 4 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS5,Message Buffer 5 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB1_64B_WORD0,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x3 line.long 0x0 "MB2_32B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB3_16B_WORD0,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x7 line.long 0x0 "MB5_8B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID5,Message Buffer 5 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB1_64B_WORD1,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x3 line.long 0x0 "MB2_32B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB3_16B_WORD1,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x7 line.long 0x0 "MB5_8B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD2,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB2_32B_WORD0,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB3_16B_WORD2,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB5_8B_WORD0,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x7 line.long 0x0 "WORD05,Message Buffer 5 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD3,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB2_32B_WORD1,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB3_16B_WORD3,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB5_8B_WORD1,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x7 line.long 0x0 "WORD15,Message Buffer 5 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS6,Message Buffer 6 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x3 line.long 0x0 "MB1_64B_WORD4,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB2_32B_WORD2,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB4_16B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x7 line.long 0x0 "MB6_8B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID6,Message Buffer 6 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x3 line.long 0x0 "MB1_64B_WORD5,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB2_32B_WORD3,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB4_16B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x7 line.long 0x0 "MB6_8B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD6,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB2_32B_WORD4,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB4_16B_WORD0,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB6_8B_WORD0,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x7 line.long 0x0 "WORD06,Message Buffer 6 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD7,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB2_32B_WORD5,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB4_16B_WORD1,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB6_8B_WORD1,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x7 line.long 0x0 "WORD16,Message Buffer 6 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS7,Message Buffer 7 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF0++0x3 line.long 0x0 "MB1_64B_WORD8,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB2_32B_WORD6,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB4_16B_WORD2,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x7 line.long 0x0 "MB7_8B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID7,Message Buffer 7 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xF4++0x3 line.long 0x0 "MB1_64B_WORD9,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB2_32B_WORD7,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB4_16B_WORD3,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x7 line.long 0x0 "MB7_8B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD10,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x3 line.long 0x0 "MB3_32B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB5_16B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB7_8B_WORD0,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x7 line.long 0x0 "WORD07,Message Buffer 7 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD11,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x3 line.long 0x0 "MB3_32B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB5_16B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB7_8B_WORD1,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x7 line.long 0x0 "WORD17,Message Buffer 7 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS8,Message Buffer 8 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x100++0x3 line.long 0x0 "MB1_64B_WORD12,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB3_32B_WORD0,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB5_16B_WORD0,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x7 line.long 0x0 "MB8_8B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID8,Message Buffer 8 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x104++0x3 line.long 0x0 "MB1_64B_WORD13,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB3_32B_WORD1,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB5_16B_WORD1,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x7 line.long 0x0 "MB8_8B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD14,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB3_32B_WORD2,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB5_16B_WORD2,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB8_8B_WORD0,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x108++0x7 line.long 0x0 "WORD08,Message Buffer 8 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD15,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB3_32B_WORD3,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB5_16B_WORD3,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB8_8B_WORD1,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x7 line.long 0x0 "WORD18,Message Buffer 8 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS9,Message Buffer 9 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB2_64B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB3_32B_WORD4,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x110++0x3 line.long 0x0 "MB6_16B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x7 line.long 0x0 "MB9_8B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID9,Message Buffer 9 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB2_64B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB3_32B_WORD5,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x114++0x3 line.long 0x0 "MB6_16B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x7 line.long 0x0 "MB9_8B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB2_64B_WORD0,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB3_32B_WORD6,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB6_16B_WORD0,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB9_8B_WORD0,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x7 line.long 0x0 "WORD09,Message Buffer 9 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB2_64B_WORD1,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB3_32B_WORD7,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB6_16B_WORD1,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB9_8B_WORD1,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x7 line.long 0x0 "WORD19,Message Buffer 9 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS10,Message Buffer 10 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB10_8B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB2_64B_WORD2,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x120++0x3 line.long 0x0 "MB4_32B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x7 line.long 0x0 "MB6_16B_WORD2,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID10,Message Buffer 10 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB10_8B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB2_64B_WORD3,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x124++0x3 line.long 0x0 "MB4_32B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x7 line.long 0x0 "MB6_16B_WORD3,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD0,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB2_64B_WORD4,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB4_32B_WORD0,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB7_16B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x128++0x7 line.long 0x0 "WORD010,Message Buffer 10 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD1,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB2_64B_WORD5,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB4_32B_WORD1,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB7_16B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x12C++0x7 line.long 0x0 "WORD110,Message Buffer 10 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS11,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB11_8B_CS,Message Buffer 11 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB2_64B_WORD6,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x130++0x3 line.long 0x0 "MB4_32B_WORD2,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x130++0x7 line.long 0x0 "MB7_16B_WORD0,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID11,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB11_8B_ID,Message Buffer 11 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB2_64B_WORD7,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x134++0x3 line.long 0x0 "MB4_32B_WORD3,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x134++0x7 line.long 0x0 "MB7_16B_WORD1,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD0,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB2_64B_WORD8,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB4_32B_WORD4,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB7_16B_WORD2,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x138++0x7 line.long 0x0 "WORD011,Message Buffer 11 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD1,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB2_64B_WORD9,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB4_32B_WORD5,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB7_16B_WORD3,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x7 line.long 0x0 "WORD111,Message Buffer 11 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS12,Message Buffer 12 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB12_8B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB2_64B_WORD10,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x140++0x3 line.long 0x0 "MB4_32B_WORD6,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x140++0x7 line.long 0x0 "MB8_16B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID12,Message Buffer 12 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB12_8B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB2_64B_WORD11,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x144++0x3 line.long 0x0 "MB4_32B_WORD7,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x144++0x7 line.long 0x0 "MB8_16B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_8B_WORD0,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB2_64B_WORD12,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB5_32B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x148++0x3 line.long 0x0 "MB8_16B_WORD0,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x7 line.long 0x0 "WORD012,Message Buffer 12 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_8B_WORD1,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB2_64B_WORD13,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB5_32B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x14C++0x3 line.long 0x0 "MB8_16B_WORD1,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x7 line.long 0x0 "WORD112,Message Buffer 12 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS13,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB13_8B_CS,Message Buffer 13 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB2_64B_WORD14,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x150++0x3 line.long 0x0 "MB5_32B_WORD0,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x150++0x7 line.long 0x0 "MB8_16B_WORD2,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID13,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB13_8B_ID,Message Buffer 13 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB2_64B_WORD15,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x154++0x3 line.long 0x0 "MB5_32B_WORD1,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x154++0x7 line.long 0x0 "MB8_16B_WORD3,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD0,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB3_64B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x3 line.long 0x0 "MB5_32B_WORD2,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB9_16B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x7 line.long 0x0 "WORD013,Message Buffer 13 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD1,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB3_64B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x3 line.long 0x0 "MB5_32B_WORD3,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB9_16B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x7 line.long 0x0 "WORD113,Message Buffer 13 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS14,Message Buffer 14 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB14_8B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB3_64B_WORD0,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x160++0x3 line.long 0x0 "MB5_32B_WORD4,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x160++0x7 line.long 0x0 "MB9_16B_WORD0,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID14,Message Buffer 14 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB14_8B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB3_64B_WORD1,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x164++0x3 line.long 0x0 "MB5_32B_WORD5,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x164++0x7 line.long 0x0 "MB9_16B_WORD1,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD0,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB3_64B_WORD2,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB5_32B_WORD6,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB9_16B_WORD2,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x7 line.long 0x0 "WORD014,Message Buffer 14 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD1,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB3_64B_WORD3,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB5_32B_WORD7,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB9_16B_WORD3,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x7 line.long 0x0 "WORD114,Message Buffer 14 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS15,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB10_16B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB15_8B_CS,Message Buffer 15 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB3_64B_WORD4,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x170++0x7 line.long 0x0 "MB6_32B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID15,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB10_16B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB15_8B_ID,Message Buffer 15 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB3_64B_WORD5,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x174++0x7 line.long 0x0 "MB6_32B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_16B_WORD0,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB15_8B_WORD0,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB3_64B_WORD6,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB6_32B_WORD0,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x7 line.long 0x0 "WORD015,Message Buffer 15 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_16B_WORD1,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB15_8B_WORD1,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB3_64B_WORD7,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB6_32B_WORD1,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x7 line.long 0x0 "WORD115,Message Buffer 15 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS16,Message Buffer 16 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB10_16B_WORD2,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x180++0x3 line.long 0x0 "MB16_8B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB3_64B_WORD8,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x180++0x7 line.long 0x0 "MB6_32B_WORD2,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID16,Message Buffer 16 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB10_16B_WORD3,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x184++0x3 line.long 0x0 "MB16_8B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB3_64B_WORD9,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x184++0x7 line.long 0x0 "MB6_32B_WORD3,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x188++0x3 line.long 0x0 "MB16_8B_WORD0,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB3_64B_WORD10,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB6_32B_WORD4,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x188++0x7 line.long 0x0 "WORD016,Message Buffer 16 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x18C++0x3 line.long 0x0 "MB16_8B_WORD1,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB3_64B_WORD11,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB6_32B_WORD5,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x7 line.long 0x0 "WORD116,Message Buffer 16 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS17,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB11_16B_WORD0,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x190++0x3 line.long 0x0 "MB17_8B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB3_64B_WORD12,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x190++0x7 line.long 0x0 "MB6_32B_WORD6,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID17,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB11_16B_WORD1,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x194++0x3 line.long 0x0 "MB17_8B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB3_64B_WORD13,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x194++0x7 line.long 0x0 "MB6_32B_WORD7,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD2,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB17_8B_WORD0,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB3_64B_WORD14,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB7_32B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x198++0x7 line.long 0x0 "WORD017,Message Buffer 17 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD3,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB17_8B_WORD1,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB3_64B_WORD15,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB7_32B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x19C++0x7 line.long 0x0 "WORD117,Message Buffer 17 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS18,Message Buffer 18 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB12_16B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB18_8B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB4_64B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x7 line.long 0x0 "MB7_32B_WORD0,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID18,Message Buffer 18 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB12_16B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB18_8B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB4_64B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x7 line.long 0x0 "MB7_32B_WORD1,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD0,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB18_8B_WORD0,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB4_64B_WORD0,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB7_32B_WORD2,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x7 line.long 0x0 "WORD018,Message Buffer 18 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD1,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB18_8B_WORD1,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB4_64B_WORD1,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB7_32B_WORD3,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x7 line.long 0x0 "WORD118,Message Buffer 18 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS19,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB12_16B_WORD2,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x3 line.long 0x0 "MB19_8B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB4_64B_WORD2,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x7 line.long 0x0 "MB7_32B_WORD4,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID19,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB12_16B_WORD3,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x3 line.long 0x0 "MB19_8B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB4_64B_WORD3,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x7 line.long 0x0 "MB7_32B_WORD5,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B8++0x3 line.long 0x0 "MB19_8B_WORD0,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB4_64B_WORD4,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB7_32B_WORD6,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x7 line.long 0x0 "WORD019,Message Buffer 19 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1BC++0x3 line.long 0x0 "MB19_8B_WORD1,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB4_64B_WORD5,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB7_32B_WORD7,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x7 line.long 0x0 "WORD119,Message Buffer 19 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS20,Message Buffer 20 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB13_16B_WORD0,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x3 line.long 0x0 "MB20_8B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB4_64B_WORD6,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x7 line.long 0x0 "MB8_32B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID20,Message Buffer 20 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB13_16B_WORD1,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x3 line.long 0x0 "MB20_8B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB4_64B_WORD7,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x7 line.long 0x0 "MB8_32B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_16B_WORD2,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB20_8B_WORD0,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB4_64B_WORD8,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB8_32B_WORD0,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x7 line.long 0x0 "WORD020,Message Buffer 20 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_WORD3,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB20_8B_WORD1,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB4_64B_WORD9,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB8_32B_WORD1,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x7 line.long 0x0 "WORD120,Message Buffer 20 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS21,Message Buffer 21 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB14_16B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB21_8B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB4_64B_WORD10,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x1D0++0x7 line.long 0x0 "MB8_32B_WORD2,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID21,Message Buffer 21 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB14_16B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB21_8B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB4_64B_WORD11,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x1D4++0x7 line.long 0x0 "MB8_32B_WORD3,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD0,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB21_8B_WORD0,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB4_64B_WORD12,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB8_32B_WORD4,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x7 line.long 0x0 "WORD021,Message Buffer 21 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD1,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB21_8B_WORD1,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB4_64B_WORD13,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB8_32B_WORD5,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x7 line.long 0x0 "WORD121,Message Buffer 21 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS22,Message Buffer 22 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB14_16B_WORD2,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x3 line.long 0x0 "MB22_8B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB4_64B_WORD14,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x7 line.long 0x0 "MB8_32B_WORD6,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID22,Message Buffer 22 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB14_16B_WORD3,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x3 line.long 0x0 "MB22_8B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB4_64B_WORD15,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x7 line.long 0x0 "MB8_32B_WORD7,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB22_8B_WORD0,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1E8++0x3 line.long 0x0 "MB5_64B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB9_32B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x7 line.long 0x0 "WORD022,Message Buffer 22 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB22_8B_WORD1,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1EC++0x3 line.long 0x0 "MB5_64B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB9_32B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x7 line.long 0x0 "WORD122,Message Buffer 22 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS23,Message Buffer 23 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB15_16B_WORD0,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x3 line.long 0x0 "MB23_8B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB5_64B_WORD0,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x7 line.long 0x0 "MB9_32B_WORD0,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID23,Message Buffer 23 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB15_16B_WORD1,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x3 line.long 0x0 "MB23_8B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB5_64B_WORD1,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x7 line.long 0x0 "MB9_32B_WORD1,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD2,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB23_8B_WORD0,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB5_64B_WORD2,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB9_32B_WORD2,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x7 line.long 0x0 "WORD023,Message Buffer 23 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD3,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB23_8B_WORD1,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB5_64B_WORD3,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB9_32B_WORD3,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x7 line.long 0x0 "WORD123,Message Buffer 23 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS24,Message Buffer 24 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB16_16B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB24_8B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB5_64B_WORD4,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x200++0x7 line.long 0x0 "MB9_32B_WORD4,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID24,Message Buffer 24 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB16_16B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB24_8B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB5_64B_WORD5,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x204++0x7 line.long 0x0 "MB9_32B_WORD5,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD0,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB24_8B_WORD0,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB5_64B_WORD6,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB9_32B_WORD6,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x7 line.long 0x0 "WORD024,Message Buffer 24 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD1,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB24_8B_WORD1,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB5_64B_WORD7,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB9_32B_WORD7,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x7 line.long 0x0 "WORD124,Message Buffer 24 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS25,Message Buffer 25 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB10_32B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB16_16B_WORD2,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x210++0x3 line.long 0x0 "MB25_8B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x7 line.long 0x0 "MB5_64B_WORD8,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID25,Message Buffer 25 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB10_32B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB16_16B_WORD3,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x214++0x3 line.long 0x0 "MB25_8B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x7 line.long 0x0 "MB5_64B_WORD9,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD0,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB17_16B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x218++0x3 line.long 0x0 "MB25_8B_WORD0,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB5_64B_WORD10,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x218++0x7 line.long 0x0 "WORD025,Message Buffer 25 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD1,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB17_16B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x21C++0x3 line.long 0x0 "MB25_8B_WORD1,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB5_64B_WORD11,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x7 line.long 0x0 "WORD125,Message Buffer 25 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS26,Message Buffer 26 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x3 line.long 0x0 "MB10_32B_WORD2,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB17_16B_WORD0,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB26_8B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x7 line.long 0x0 "MB5_64B_WORD12,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID26,Message Buffer 26 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x3 line.long 0x0 "MB10_32B_WORD3,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB17_16B_WORD1,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB26_8B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x7 line.long 0x0 "MB5_64B_WORD13,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD4,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB17_16B_WORD2,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB26_8B_WORD0,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB5_64B_WORD14,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x228++0x7 line.long 0x0 "WORD026,Message Buffer 26 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD5,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB17_16B_WORD3,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB26_8B_WORD1,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB5_64B_WORD15,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x7 line.long 0x0 "WORD126,Message Buffer 26 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS27,Message Buffer 27 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB10_32B_WORD6,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x230++0x3 line.long 0x0 "MB18_16B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB27_8B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x7 line.long 0x0 "MB6_64B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID27,Message Buffer 27 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB10_32B_WORD7,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x234++0x3 line.long 0x0 "MB18_16B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB27_8B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x7 line.long 0x0 "MB6_64B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_32B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x238++0x3 line.long 0x0 "MB18_16B_WORD0,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB27_8B_WORD0,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB6_64B_WORD0,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x7 line.long 0x0 "WORD027,Message Buffer 27 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x23C++0x3 line.long 0x0 "MB18_16B_WORD1,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB27_8B_WORD1,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB6_64B_WORD1,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x7 line.long 0x0 "WORD127,Message Buffer 27 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS28,Message Buffer 28 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x3 line.long 0x0 "MB11_32B_WORD0,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB18_16B_WORD2,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB28_8B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x7 line.long 0x0 "MB6_64B_WORD2,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID28,Message Buffer 28 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x3 line.long 0x0 "MB11_32B_WORD1,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB18_16B_WORD3,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB28_8B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x7 line.long 0x0 "MB6_64B_WORD3,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD2,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB19_16B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x248++0x3 line.long 0x0 "MB28_8B_WORD0,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB6_64B_WORD4,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x248++0x7 line.long 0x0 "WORD028,Message Buffer 28 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD3,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB19_16B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x24C++0x3 line.long 0x0 "MB28_8B_WORD1,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB6_64B_WORD5,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x7 line.long 0x0 "WORD128,Message Buffer 28 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS29,Message Buffer 29 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x3 line.long 0x0 "MB11_32B_WORD4,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB19_16B_WORD0,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB29_8B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x7 line.long 0x0 "MB6_64B_WORD6,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID29,Message Buffer 29 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x3 line.long 0x0 "MB11_32B_WORD5,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB19_16B_WORD1,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB29_8B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x7 line.long 0x0 "MB6_64B_WORD7,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD6,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB19_16B_WORD2,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB29_8B_WORD0,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB6_64B_WORD8,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x258++0x7 line.long 0x0 "WORD029,Message Buffer 29 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD7,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB19_16B_WORD3,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB29_8B_WORD1,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB6_64B_WORD9,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x7 line.long 0x0 "WORD129,Message Buffer 29 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS30,Message Buffer 30 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB12_32B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB20_16B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB30_8B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x7 line.long 0x0 "MB6_64B_WORD10,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID30,Message Buffer 30 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB12_32B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB20_16B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB30_8B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x7 line.long 0x0 "MB6_64B_WORD11,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD0,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB20_16B_WORD0,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB30_8B_WORD0,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB6_64B_WORD12,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x268++0x7 line.long 0x0 "WORD030,Message Buffer 30 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD1,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB20_16B_WORD1,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB30_8B_WORD1,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB6_64B_WORD13,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x7 line.long 0x0 "WORD130,Message Buffer 30 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS31,Message Buffer 31 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x3 line.long 0x0 "MB12_32B_WORD2,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB20_16B_WORD2,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB31_8B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x7 line.long 0x0 "MB6_64B_WORD14,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID31,Message Buffer 31 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x3 line.long 0x0 "MB12_32B_WORD3,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB20_16B_WORD3,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB31_8B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x7 line.long 0x0 "MB6_64B_WORD15,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD4,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB21_16B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x3 line.long 0x0 "MB31_8B_WORD0,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB7_64B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x7 line.long 0x0 "WORD031,Message Buffer 31 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD5,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB21_16B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x3 line.long 0x0 "MB31_8B_WORD1,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB7_64B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x7 line.long 0x0 "WORD131,Message Buffer 31 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS32,Message Buffer 32 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x3 line.long 0x0 "MB12_32B_WORD6,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB21_16B_WORD0,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB32_8B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x7 line.long 0x0 "MB7_64B_WORD0,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID32,Message Buffer 32 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x3 line.long 0x0 "MB12_32B_WORD7,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB21_16B_WORD1,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB32_8B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x7 line.long 0x0 "MB7_64B_WORD1,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x288++0x3 line.long 0x0 "MB21_16B_WORD2,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB32_8B_WORD0,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB7_64B_WORD2,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x7 line.long 0x0 "WORD032,Message Buffer 32 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x28C++0x3 line.long 0x0 "MB21_16B_WORD3,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB32_8B_WORD1,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB7_64B_WORD3,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x7 line.long 0x0 "WORD132,Message Buffer 32 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS33,Message Buffer 33 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB13_32B_WORD0,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x290++0x3 line.long 0x0 "MB22_16B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB33_8B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x7 line.long 0x0 "MB7_64B_WORD4,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID33,Message Buffer 33 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB13_32B_WORD1,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x294++0x3 line.long 0x0 "MB22_16B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB33_8B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x7 line.long 0x0 "MB7_64B_WORD5,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD2,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB22_16B_WORD0,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB33_8B_WORD0,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB7_64B_WORD6,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x298++0x7 line.long 0x0 "WORD033,Message Buffer 33 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD3,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB22_16B_WORD1,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB33_8B_WORD1,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB7_64B_WORD7,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x7 line.long 0x0 "WORD133,Message Buffer 33 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS34,Message Buffer 34 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x3 line.long 0x0 "MB13_32B_WORD4,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB22_16B_WORD2,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB34_8B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x7 line.long 0x0 "MB7_64B_WORD8,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID34,Message Buffer 34 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x3 line.long 0x0 "MB13_32B_WORD5,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB22_16B_WORD3,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB34_8B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x7 line.long 0x0 "MB7_64B_WORD9,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD6,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB23_16B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A8++0x3 line.long 0x0 "MB34_8B_WORD0,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB7_64B_WORD10,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x7 line.long 0x0 "WORD034,Message Buffer 34 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD7,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB23_16B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2AC++0x3 line.long 0x0 "MB34_8B_WORD1,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB7_64B_WORD11,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x7 line.long 0x0 "WORD134,Message Buffer 34 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS35,Message Buffer 35 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB14_32B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB23_16B_WORD0,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B0++0x3 line.long 0x0 "MB35_8B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x7 line.long 0x0 "MB7_64B_WORD12,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID35,Message Buffer 35 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB14_32B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB23_16B_WORD1,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2B4++0x3 line.long 0x0 "MB35_8B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x7 line.long 0x0 "MB7_64B_WORD13,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD0,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB23_16B_WORD2,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB35_8B_WORD0,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB7_64B_WORD14,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x7 line.long 0x0 "WORD035,Message Buffer 35 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD1,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB23_16B_WORD3,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB35_8B_WORD1,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB7_64B_WORD15,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x7 line.long 0x0 "WORD135,Message Buffer 35 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS36,Message Buffer 36 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB14_32B_WORD2,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2C0++0x3 line.long 0x0 "MB24_16B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB36_8B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x7 line.long 0x0 "MB8_64B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID36,Message Buffer 36 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB14_32B_WORD3,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2C4++0x3 line.long 0x0 "MB24_16B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB36_8B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x7 line.long 0x0 "MB8_64B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_32B_WORD4,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB24_16B_WORD0,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB36_8B_WORD0,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB8_64B_WORD0,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x7 line.long 0x0 "WORD036,Message Buffer 36 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD5,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB24_16B_WORD1,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB36_8B_WORD1,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB8_64B_WORD1,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x7 line.long 0x0 "WORD136,Message Buffer 36 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS37,Message Buffer 37 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x3 line.long 0x0 "MB14_32B_WORD6,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB24_16B_WORD2,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB37_8B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x7 line.long 0x0 "MB8_64B_WORD2,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID37,Message Buffer 37 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x3 line.long 0x0 "MB14_32B_WORD7,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB24_16B_WORD3,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB37_8B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x7 line.long 0x0 "MB8_64B_WORD3,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB25_16B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB37_8B_WORD0,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x3 line.long 0x0 "MB8_64B_WORD4,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x7 line.long 0x0 "WORD037,Message Buffer 37 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB25_16B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB37_8B_WORD1,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x3 line.long 0x0 "MB8_64B_WORD5,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x7 line.long 0x0 "WORD137,Message Buffer 37 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS38,Message Buffer 38 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x3 line.long 0x0 "MB15_32B_WORD0,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB25_16B_WORD0,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB38_8B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x7 line.long 0x0 "MB8_64B_WORD6,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID38,Message Buffer 38 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x3 line.long 0x0 "MB15_32B_WORD1,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB25_16B_WORD1,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB38_8B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x7 line.long 0x0 "MB8_64B_WORD7,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD2,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB25_16B_WORD2,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB38_8B_WORD0,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB8_64B_WORD8,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x7 line.long 0x0 "WORD038,Message Buffer 38 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD3,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB25_16B_WORD3,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB38_8B_WORD1,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB8_64B_WORD9,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x7 line.long 0x0 "WORD138,Message Buffer 38 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS39,Message Buffer 39 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB15_32B_WORD4,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2F0++0x3 line.long 0x0 "MB26_16B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB39_8B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x7 line.long 0x0 "MB8_64B_WORD10,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID39,Message Buffer 39 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB15_32B_WORD5,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2F4++0x3 line.long 0x0 "MB26_16B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB39_8B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x7 line.long 0x0 "MB8_64B_WORD11,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD6,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB26_16B_WORD0,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB39_8B_WORD0,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB8_64B_WORD12,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x7 line.long 0x0 "WORD039,Message Buffer 39 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD7,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB26_16B_WORD1,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB39_8B_WORD1,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB8_64B_WORD13,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x7 line.long 0x0 "WORD139,Message Buffer 39 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS40,Message Buffer 40 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB16_32B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB26_16B_WORD2,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x300++0x3 line.long 0x0 "MB40_8B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x7 line.long 0x0 "MB8_64B_WORD14,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID40,Message Buffer 40 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB16_32B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB26_16B_WORD3,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x304++0x3 line.long 0x0 "MB40_8B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x7 line.long 0x0 "MB8_64B_WORD15,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD0,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB27_16B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x3 line.long 0x0 "MB40_8B_WORD0,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB9_64B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x7 line.long 0x0 "WORD040,Message Buffer 40 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD1,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB27_16B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x3 line.long 0x0 "MB40_8B_WORD1,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB9_64B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x7 line.long 0x0 "WORD140,Message Buffer 40 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS41,Message Buffer 41 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x3 line.long 0x0 "MB16_32B_WORD2,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB27_16B_WORD0,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB41_8B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x7 line.long 0x0 "MB9_64B_WORD0,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID41,Message Buffer 41 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x3 line.long 0x0 "MB16_32B_WORD3,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB27_16B_WORD1,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB41_8B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x7 line.long 0x0 "MB9_64B_WORD1,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD4,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB27_16B_WORD2,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB41_8B_WORD0,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB9_64B_WORD2,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x7 line.long 0x0 "WORD041,Message Buffer 41 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD5,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB27_16B_WORD3,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB41_8B_WORD1,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB9_64B_WORD3,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x7 line.long 0x0 "WORD141,Message Buffer 41 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS42,Message Buffer 42 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB16_32B_WORD6,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x320++0x3 line.long 0x0 "MB28_16B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB42_8B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x7 line.long 0x0 "MB9_64B_WORD4,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID42,Message Buffer 42 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB16_32B_WORD7,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x324++0x3 line.long 0x0 "MB28_16B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB42_8B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x7 line.long 0x0 "MB9_64B_WORD5,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x328++0x3 line.long 0x0 "MB28_16B_WORD0,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB42_8B_WORD0,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB9_64B_WORD6,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x328++0x7 line.long 0x0 "WORD042,Message Buffer 42 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x32C++0x3 line.long 0x0 "MB28_16B_WORD1,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB42_8B_WORD1,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB9_64B_WORD7,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x7 line.long 0x0 "WORD142,Message Buffer 42 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS43,Message Buffer 43 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x3 line.long 0x0 "MB17_32B_WORD0,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB28_16B_WORD2,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB43_8B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x7 line.long 0x0 "MB9_64B_WORD8,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID43,Message Buffer 43 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x3 line.long 0x0 "MB17_32B_WORD1,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB28_16B_WORD3,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB43_8B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x7 line.long 0x0 "MB9_64B_WORD9,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD2,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB29_16B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x338++0x3 line.long 0x0 "MB43_8B_WORD0,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB9_64B_WORD10,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x338++0x7 line.long 0x0 "WORD043,Message Buffer 43 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD3,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB29_16B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x33C++0x3 line.long 0x0 "MB43_8B_WORD1,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB9_64B_WORD11,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x7 line.long 0x0 "WORD143,Message Buffer 43 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS44,Message Buffer 44 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x3 line.long 0x0 "MB17_32B_WORD4,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB29_16B_WORD0,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB44_8B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x7 line.long 0x0 "MB9_64B_WORD12,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID44,Message Buffer 44 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x3 line.long 0x0 "MB17_32B_WORD5,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB29_16B_WORD1,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB44_8B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x7 line.long 0x0 "MB9_64B_WORD13,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD6,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB29_16B_WORD2,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB44_8B_WORD0,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB9_64B_WORD14,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x348++0x7 line.long 0x0 "WORD044,Message Buffer 44 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD7,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB29_16B_WORD3,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB44_8B_WORD1,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB9_64B_WORD15,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x7 line.long 0x0 "WORD144,Message Buffer 44 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS45,Message Buffer 45 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB10_64B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB18_32B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB30_16B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x7 line.long 0x0 "MB45_8B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID45,Message Buffer 45 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB10_64B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB18_32B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB30_16B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x7 line.long 0x0 "MB45_8B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD0,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB18_32B_WORD0,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB30_16B_WORD0,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB45_8B_WORD0,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x7 line.long 0x0 "WORD045,Message Buffer 45 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD1,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB18_32B_WORD1,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB30_16B_WORD1,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB45_8B_WORD1,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x7 line.long 0x0 "WORD145,Message Buffer 45 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS46,Message Buffer 46 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x360++0x3 line.long 0x0 "MB10_64B_WORD2,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB18_32B_WORD2,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB30_16B_WORD2,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x7 line.long 0x0 "MB46_8B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID46,Message Buffer 46 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x364++0x3 line.long 0x0 "MB10_64B_WORD3,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB18_32B_WORD3,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB30_16B_WORD3,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x7 line.long 0x0 "MB46_8B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD4,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB18_32B_WORD4,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB31_16B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x368++0x3 line.long 0x0 "MB46_8B_WORD0,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x368++0x7 line.long 0x0 "WORD046,Message Buffer 46 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD5,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB18_32B_WORD5,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB31_16B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x36C++0x3 line.long 0x0 "MB46_8B_WORD1,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x7 line.long 0x0 "WORD146,Message Buffer 46 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS47,Message Buffer 47 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x370++0x3 line.long 0x0 "MB10_64B_WORD6,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB18_32B_WORD6,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB31_16B_WORD0,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x370++0x7 line.long 0x0 "MB47_8B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID47,Message Buffer 47 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x374++0x3 line.long 0x0 "MB10_64B_WORD7,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB18_32B_WORD7,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB31_16B_WORD1,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x374++0x7 line.long 0x0 "MB47_8B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD8,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB19_32B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x378++0x3 line.long 0x0 "MB31_16B_WORD2,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB47_8B_WORD0,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x378++0x7 line.long 0x0 "WORD047,Message Buffer 47 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD9,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB19_32B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x37C++0x3 line.long 0x0 "MB31_16B_WORD3,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB47_8B_WORD1,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x7 line.long 0x0 "WORD147,Message Buffer 47 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS48,Message Buffer 48 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x3 line.long 0x0 "MB10_64B_WORD10,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB19_32B_WORD0,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB32_16B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x7 line.long 0x0 "MB48_8B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID48,Message Buffer 48 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x3 line.long 0x0 "MB10_64B_WORD11,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB19_32B_WORD1,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB32_16B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x7 line.long 0x0 "MB48_8B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD12,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB19_32B_WORD2,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB32_16B_WORD0,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB48_8B_WORD0,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x7 line.long 0x0 "WORD048,Message Buffer 48 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD13,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB19_32B_WORD3,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB32_16B_WORD1,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB48_8B_WORD1,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x7 line.long 0x0 "WORD148,Message Buffer 48 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS49,Message Buffer 49 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x390++0x3 line.long 0x0 "MB10_64B_WORD14,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB19_32B_WORD4,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB32_16B_WORD2,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x390++0x7 line.long 0x0 "MB49_8B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID49,Message Buffer 49 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x394++0x3 line.long 0x0 "MB10_64B_WORD15,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB19_32B_WORD5,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB32_16B_WORD3,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x394++0x7 line.long 0x0 "MB49_8B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB19_32B_WORD6,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x398++0x3 line.long 0x0 "MB33_16B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB49_8B_WORD0,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x398++0x7 line.long 0x0 "WORD049,Message Buffer 49 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB19_32B_WORD7,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x3 line.long 0x0 "MB33_16B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB49_8B_WORD1,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x7 line.long 0x0 "WORD149,Message Buffer 49 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS50,Message Buffer 50 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB11_64B_WORD0,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x3 line.long 0x0 "MB20_32B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB33_16B_WORD0,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x7 line.long 0x0 "MB50_8B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID50,Message Buffer 50 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB11_64B_WORD1,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x3 line.long 0x0 "MB20_32B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB33_16B_WORD1,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x7 line.long 0x0 "MB50_8B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD2,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB20_32B_WORD0,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB33_16B_WORD2,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB50_8B_WORD0,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x7 line.long 0x0 "WORD050,Message Buffer 50 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD3,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB20_32B_WORD1,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB33_16B_WORD3,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB50_8B_WORD1,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x7 line.long 0x0 "WORD150,Message Buffer 50 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS51,Message Buffer 51 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x3 line.long 0x0 "MB11_64B_WORD4,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB20_32B_WORD2,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB34_16B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x7 line.long 0x0 "MB51_8B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID51,Message Buffer 51 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x3 line.long 0x0 "MB11_64B_WORD5,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB20_32B_WORD3,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB34_16B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x7 line.long 0x0 "MB51_8B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD6,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB20_32B_WORD4,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB34_16B_WORD0,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB51_8B_WORD0,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x7 line.long 0x0 "WORD051,Message Buffer 51 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD7,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB20_32B_WORD5,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB34_16B_WORD1,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB51_8B_WORD1,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x7 line.long 0x0 "WORD151,Message Buffer 51 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS52,Message Buffer 52 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C0++0x3 line.long 0x0 "MB11_64B_WORD8,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB20_32B_WORD6,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB34_16B_WORD2,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x7 line.long 0x0 "MB52_8B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID52,Message Buffer 52 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3C4++0x3 line.long 0x0 "MB11_64B_WORD9,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB20_32B_WORD7,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB34_16B_WORD3,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x7 line.long 0x0 "MB52_8B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD10,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x3 line.long 0x0 "MB21_32B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB35_16B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB52_8B_WORD0,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x7 line.long 0x0 "WORD052,Message Buffer 52 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD11,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x3 line.long 0x0 "MB21_32B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB35_16B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB52_8B_WORD1,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x7 line.long 0x0 "WORD152,Message Buffer 52 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS53,Message Buffer 53 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3D0++0x3 line.long 0x0 "MB11_64B_WORD12,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB21_32B_WORD0,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB35_16B_WORD0,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x7 line.long 0x0 "MB53_8B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID53,Message Buffer 53 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3D4++0x3 line.long 0x0 "MB11_64B_WORD13,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB21_32B_WORD1,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB35_16B_WORD1,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x7 line.long 0x0 "MB53_8B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD14,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB21_32B_WORD2,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB35_16B_WORD2,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB53_8B_WORD0,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x7 line.long 0x0 "WORD053,Message Buffer 53 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD15,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB21_32B_WORD3,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB35_16B_WORD3,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB53_8B_WORD1,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x7 line.long 0x0 "WORD153,Message Buffer 53 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS54,Message Buffer 54 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB12_64B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB21_32B_WORD4,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3E0++0x3 line.long 0x0 "MB36_16B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x7 line.long 0x0 "MB54_8B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID54,Message Buffer 54 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB12_64B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB21_32B_WORD5,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3E4++0x3 line.long 0x0 "MB36_16B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x7 line.long 0x0 "MB54_8B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD0,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB21_32B_WORD6,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB36_16B_WORD0,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB54_8B_WORD0,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x7 line.long 0x0 "WORD054,Message Buffer 54 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD1,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB21_32B_WORD7,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB36_16B_WORD1,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB54_8B_WORD1,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x7 line.long 0x0 "WORD154,Message Buffer 54 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS55,Message Buffer 55 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB12_64B_WORD2,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x3 line.long 0x0 "MB22_32B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB36_16B_WORD2,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x7 line.long 0x0 "MB55_8B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID55,Message Buffer 55 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB12_64B_WORD3,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x3 line.long 0x0 "MB22_32B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB36_16B_WORD3,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x7 line.long 0x0 "MB55_8B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD4,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB22_32B_WORD0,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB37_16B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F8++0x3 line.long 0x0 "MB55_8B_WORD0,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x7 line.long 0x0 "WORD055,Message Buffer 55 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD5,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB22_32B_WORD1,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB37_16B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3FC++0x3 line.long 0x0 "MB55_8B_WORD1,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x7 line.long 0x0 "WORD155,Message Buffer 55 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS56,Message Buffer 56 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x400++0x3 line.long 0x0 "MB12_64B_WORD6,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB22_32B_WORD2,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB37_16B_WORD0,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x400++0x7 line.long 0x0 "MB56_8B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID56,Message Buffer 56 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x404++0x3 line.long 0x0 "MB12_64B_WORD7,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB22_32B_WORD3,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB37_16B_WORD1,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x404++0x7 line.long 0x0 "MB56_8B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD8,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB22_32B_WORD4,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB37_16B_WORD2,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB56_8B_WORD0,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x408++0x7 line.long 0x0 "WORD056,Message Buffer 56 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD9,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB22_32B_WORD5,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB37_16B_WORD3,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB56_8B_WORD1,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x7 line.long 0x0 "WORD156,Message Buffer 56 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS57,Message Buffer 57 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x3 line.long 0x0 "MB12_64B_WORD10,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB22_32B_WORD6,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB38_16B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x7 line.long 0x0 "MB57_8B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID57,Message Buffer 57 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x3 line.long 0x0 "MB12_64B_WORD11,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB22_32B_WORD7,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB38_16B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x7 line.long 0x0 "MB57_8B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD12,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB23_32B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x418++0x3 line.long 0x0 "MB38_16B_WORD0,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB57_8B_WORD0,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x7 line.long 0x0 "WORD057,Message Buffer 57 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD13,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB23_32B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x41C++0x3 line.long 0x0 "MB38_16B_WORD1,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB57_8B_WORD1,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x7 line.long 0x0 "WORD157,Message Buffer 57 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS58,Message Buffer 58 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x420++0x3 line.long 0x0 "MB12_64B_WORD14,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB23_32B_WORD0,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB38_16B_WORD2,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x420++0x7 line.long 0x0 "MB58_8B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID58,Message Buffer 58 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x424++0x3 line.long 0x0 "MB12_64B_WORD15,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB23_32B_WORD1,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB38_16B_WORD3,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x424++0x7 line.long 0x0 "MB58_8B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB23_32B_WORD2,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x428++0x3 line.long 0x0 "MB39_16B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB58_8B_WORD0,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x428++0x7 line.long 0x0 "WORD058,Message Buffer 58 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB23_32B_WORD3,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x3 line.long 0x0 "MB39_16B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB58_8B_WORD1,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x7 line.long 0x0 "WORD158,Message Buffer 58 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS59,Message Buffer 59 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x430++0x3 line.long 0x0 "MB13_64B_WORD0,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB23_32B_WORD4,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB39_16B_WORD0,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x7 line.long 0x0 "MB59_8B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID59,Message Buffer 59 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x434++0x3 line.long 0x0 "MB13_64B_WORD1,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB23_32B_WORD5,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB39_16B_WORD1,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x7 line.long 0x0 "MB59_8B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD2,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB23_32B_WORD6,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB39_16B_WORD2,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB59_8B_WORD0,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x438++0x7 line.long 0x0 "WORD059,Message Buffer 59 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD3,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB23_32B_WORD7,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB39_16B_WORD3,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB59_8B_WORD1,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x7 line.long 0x0 "WORD159,Message Buffer 59 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS60,Message Buffer 60 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB13_64B_WORD4,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x440++0x3 line.long 0x0 "MB24_32B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB40_16B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x7 line.long 0x0 "MB60_8B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID60,Message Buffer 60 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB13_64B_WORD5,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x444++0x3 line.long 0x0 "MB24_32B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB40_16B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x7 line.long 0x0 "MB60_8B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD6,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB24_32B_WORD0,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB40_16B_WORD0,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB60_8B_WORD0,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x7 line.long 0x0 "WORD060,Message Buffer 60 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD7,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB24_32B_WORD1,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB40_16B_WORD1,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB60_8B_WORD1,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x7 line.long 0x0 "WORD160,Message Buffer 60 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS61,Message Buffer 61 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x450++0x3 line.long 0x0 "MB13_64B_WORD8,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB24_32B_WORD2,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB40_16B_WORD2,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x7 line.long 0x0 "MB61_8B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID61,Message Buffer 61 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x454++0x3 line.long 0x0 "MB13_64B_WORD9,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB24_32B_WORD3,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB40_16B_WORD3,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x7 line.long 0x0 "MB61_8B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD10,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB24_32B_WORD4,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB41_16B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x458++0x3 line.long 0x0 "MB61_8B_WORD0,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x458++0x7 line.long 0x0 "WORD061,Message Buffer 61 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD11,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB24_32B_WORD5,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB41_16B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x45C++0x3 line.long 0x0 "MB61_8B_WORD1,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x7 line.long 0x0 "WORD161,Message Buffer 61 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS62,Message Buffer 62 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x460++0x3 line.long 0x0 "MB13_64B_WORD12,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB24_32B_WORD6,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB41_16B_WORD0,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x460++0x7 line.long 0x0 "MB62_8B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID62,Message Buffer 62 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x464++0x3 line.long 0x0 "MB13_64B_WORD13,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB24_32B_WORD7,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB41_16B_WORD1,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x464++0x7 line.long 0x0 "MB62_8B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD14,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB25_32B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x468++0x3 line.long 0x0 "MB41_16B_WORD2,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB62_8B_WORD0,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x468++0x7 line.long 0x0 "WORD062,Message Buffer 62 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD15,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB25_32B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x46C++0x3 line.long 0x0 "MB41_16B_WORD3,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB62_8B_WORD1,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x7 line.long 0x0 "WORD162,Message Buffer 62 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS63,Message Buffer 63 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB14_64B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB25_32B_WORD0,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x470++0x3 line.long 0x0 "MB42_16B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x7 line.long 0x0 "MB63_8B_CS,Message Buffer 63 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID63,Message Buffer 63 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB14_64B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB25_32B_WORD1,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x474++0x3 line.long 0x0 "MB42_16B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x7 line.long 0x0 "MB63_8B_ID,Message Buffer 63 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD0,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB25_32B_WORD2,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB42_16B_WORD0,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB63_8B_WORD0,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x7 line.long 0x0 "WORD063,Message Buffer 63 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD1,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB25_32B_WORD3,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB42_16B_WORD1,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB63_8B_WORD1,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x7 line.long 0x0 "WORD163,Message Buffer 63 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS64,Message Buffer 64 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x480++0x3 line.long 0x0 "MB14_64B_WORD2,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB25_32B_WORD4,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB42_16B_WORD2,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x7 line.long 0x0 "MB64_8B_CS,Message Buffer 64 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID64,Message Buffer 64 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x484++0x3 line.long 0x0 "MB14_64B_WORD3,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB25_32B_WORD5,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB42_16B_WORD3,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x7 line.long 0x0 "MB64_8B_ID,Message Buffer 64 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD4,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB25_32B_WORD6,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB43_16B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x488++0x3 line.long 0x0 "MB64_8B_WORD0,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x488++0x7 line.long 0x0 "WORD064,Message Buffer 64 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD5,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB25_32B_WORD7,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB43_16B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x48C++0x3 line.long 0x0 "MB64_8B_WORD1,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x7 line.long 0x0 "WORD164,Message Buffer 64 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS65,Message Buffer 65 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB14_64B_WORD6,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x490++0x3 line.long 0x0 "MB26_32B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB43_16B_WORD0,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x490++0x7 line.long 0x0 "MB65_8B_CS,Message Buffer 65 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID65,Message Buffer 65 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB14_64B_WORD7,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x494++0x3 line.long 0x0 "MB26_32B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB43_16B_WORD1,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x494++0x7 line.long 0x0 "MB65_8B_ID,Message Buffer 65 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD8,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB26_32B_WORD0,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB43_16B_WORD2,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB65_8B_WORD0,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x7 line.long 0x0 "WORD065,Message Buffer 65 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD9,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB26_32B_WORD1,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB43_16B_WORD3,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB65_8B_WORD1,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x7 line.long 0x0 "WORD165,Message Buffer 65 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS66,Message Buffer 66 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x3 line.long 0x0 "MB14_64B_WORD10,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB26_32B_WORD2,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB44_16B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x7 line.long 0x0 "MB66_8B_CS,Message Buffer 66 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID66,Message Buffer 66 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x3 line.long 0x0 "MB14_64B_WORD11,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB26_32B_WORD3,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB44_16B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x7 line.long 0x0 "MB66_8B_ID,Message Buffer 66 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD12,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB26_32B_WORD4,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB44_16B_WORD0,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB66_8B_WORD0,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x7 line.long 0x0 "WORD066,Message Buffer 66 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD13,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB26_32B_WORD5,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB44_16B_WORD1,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB66_8B_WORD1,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x7 line.long 0x0 "WORD166,Message Buffer 66 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS67,Message Buffer 67 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B0++0x3 line.long 0x0 "MB14_64B_WORD14,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB26_32B_WORD6,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB44_16B_WORD2,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x7 line.long 0x0 "MB67_8B_CS,Message Buffer 67 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID67,Message Buffer 67 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4B4++0x3 line.long 0x0 "MB14_64B_WORD15,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB26_32B_WORD7,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB44_16B_WORD3,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x7 line.long 0x0 "MB67_8B_ID,Message Buffer 67 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB27_32B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB45_16B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB67_8B_WORD0,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4B8++0x7 line.long 0x0 "WORD067,Message Buffer 67 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB27_32B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB45_16B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB67_8B_WORD1,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4BC++0x7 line.long 0x0 "WORD167,Message Buffer 67 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS68,Message Buffer 68 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4C0++0x3 line.long 0x0 "MB15_64B_WORD0,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB27_32B_WORD0,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB45_16B_WORD0,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x7 line.long 0x0 "MB68_8B_CS,Message Buffer 68 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID68,Message Buffer 68 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4C4++0x3 line.long 0x0 "MB15_64B_WORD1,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB27_32B_WORD1,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB45_16B_WORD1,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x7 line.long 0x0 "MB68_8B_ID,Message Buffer 68 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD2,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB27_32B_WORD2,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB45_16B_WORD2,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB68_8B_WORD0,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x7 line.long 0x0 "WORD068,Message Buffer 68 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD3,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB27_32B_WORD3,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB45_16B_WORD3,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB68_8B_WORD1,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x7 line.long 0x0 "WORD168,Message Buffer 68 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS69,Message Buffer 69 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x3 line.long 0x0 "MB15_64B_WORD4,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB27_32B_WORD4,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB46_16B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x7 line.long 0x0 "MB69_8B_CS,Message Buffer 69 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID69,Message Buffer 69 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x3 line.long 0x0 "MB15_64B_WORD5,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB27_32B_WORD5,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB46_16B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x7 line.long 0x0 "MB69_8B_ID,Message Buffer 69 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD6,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB27_32B_WORD6,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB46_16B_WORD0,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB69_8B_WORD0,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x7 line.long 0x0 "WORD069,Message Buffer 69 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD7,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB27_32B_WORD7,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB46_16B_WORD1,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB69_8B_WORD1,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x7 line.long 0x0 "WORD169,Message Buffer 69 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS70,Message Buffer 70 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB15_64B_WORD8,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x3 line.long 0x0 "MB28_32B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB46_16B_WORD2,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x7 line.long 0x0 "MB70_8B_CS,Message Buffer 70 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID70,Message Buffer 70 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB15_64B_WORD9,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x3 line.long 0x0 "MB28_32B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB46_16B_WORD3,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x7 line.long 0x0 "MB70_8B_ID,Message Buffer 70 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD10,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB28_32B_WORD0,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB47_16B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E8++0x3 line.long 0x0 "MB70_8B_WORD0,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x7 line.long 0x0 "WORD070,Message Buffer 70 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD11,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB28_32B_WORD1,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB47_16B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4EC++0x3 line.long 0x0 "MB70_8B_WORD1,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x7 line.long 0x0 "WORD170,Message Buffer 70 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS71,Message Buffer 71 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4F0++0x3 line.long 0x0 "MB15_64B_WORD12,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB28_32B_WORD2,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB47_16B_WORD0,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x7 line.long 0x0 "MB71_8B_CS,Message Buffer 71 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID71,Message Buffer 71 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4F4++0x3 line.long 0x0 "MB15_64B_WORD13,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB28_32B_WORD3,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB47_16B_WORD1,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x7 line.long 0x0 "MB71_8B_ID,Message Buffer 71 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD14,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB28_32B_WORD4,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB47_16B_WORD2,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB71_8B_WORD0,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x7 line.long 0x0 "WORD071,Message Buffer 71 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD15,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB28_32B_WORD5,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB47_16B_WORD3,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB71_8B_WORD1,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x7 line.long 0x0 "WORD171,Message Buffer 71 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS72,Message Buffer 72 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB16_64B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB28_32B_WORD6,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x500++0x3 line.long 0x0 "MB48_16B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x7 line.long 0x0 "MB72_8B_CS,Message Buffer 72 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID72,Message Buffer 72 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB16_64B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB28_32B_WORD7,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x504++0x3 line.long 0x0 "MB48_16B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x7 line.long 0x0 "MB72_8B_ID,Message Buffer 72 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD0,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB29_32B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x508++0x3 line.long 0x0 "MB48_16B_WORD0,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB72_8B_WORD0,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x7 line.long 0x0 "WORD072,Message Buffer 72 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD1,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB29_32B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x50C++0x3 line.long 0x0 "MB48_16B_WORD1,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB72_8B_WORD1,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x7 line.long 0x0 "WORD172,Message Buffer 72 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS73,Message Buffer 73 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x510++0x3 line.long 0x0 "MB16_64B_WORD2,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB29_32B_WORD0,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB48_16B_WORD2,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x7 line.long 0x0 "MB73_8B_CS,Message Buffer 73 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID73,Message Buffer 73 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x514++0x3 line.long 0x0 "MB16_64B_WORD3,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB29_32B_WORD1,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB48_16B_WORD3,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x7 line.long 0x0 "MB73_8B_ID,Message Buffer 73 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD4,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB29_32B_WORD2,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB49_16B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x518++0x3 line.long 0x0 "MB73_8B_WORD0,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x518++0x7 line.long 0x0 "WORD073,Message Buffer 73 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD5,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB29_32B_WORD3,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB49_16B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x51C++0x3 line.long 0x0 "MB73_8B_WORD1,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x7 line.long 0x0 "WORD173,Message Buffer 73 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS74,Message Buffer 74 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x520++0x3 line.long 0x0 "MB16_64B_WORD6,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB29_32B_WORD4,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB49_16B_WORD0,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x520++0x7 line.long 0x0 "MB74_8B_CS,Message Buffer 74 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID74,Message Buffer 74 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x524++0x3 line.long 0x0 "MB16_64B_WORD7,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB29_32B_WORD5,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB49_16B_WORD1,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x524++0x7 line.long 0x0 "MB74_8B_ID,Message Buffer 74 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD8,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB29_32B_WORD6,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB49_16B_WORD2,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB74_8B_WORD0,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x528++0x7 line.long 0x0 "WORD074,Message Buffer 74 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD9,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB29_32B_WORD7,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB49_16B_WORD3,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB74_8B_WORD1,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x7 line.long 0x0 "WORD174,Message Buffer 74 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS75,Message Buffer 75 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB16_64B_WORD10,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x530++0x3 line.long 0x0 "MB30_32B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB50_16B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x7 line.long 0x0 "MB75_8B_CS,Message Buffer 75 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID75,Message Buffer 75 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB16_64B_WORD11,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x534++0x3 line.long 0x0 "MB30_32B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB50_16B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x7 line.long 0x0 "MB75_8B_ID,Message Buffer 75 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD12,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB30_32B_WORD0,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB50_16B_WORD0,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB75_8B_WORD0,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x7 line.long 0x0 "WORD075,Message Buffer 75 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD13,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB30_32B_WORD1,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB50_16B_WORD1,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB75_8B_WORD1,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x7 line.long 0x0 "WORD175,Message Buffer 75 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS76,Message Buffer 76 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x540++0x3 line.long 0x0 "MB16_64B_WORD14,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB30_32B_WORD2,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB50_16B_WORD2,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x7 line.long 0x0 "MB76_8B_CS,Message Buffer 76 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID76,Message Buffer 76 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x544++0x3 line.long 0x0 "MB16_64B_WORD15,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB30_32B_WORD3,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB50_16B_WORD3,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x7 line.long 0x0 "MB76_8B_ID,Message Buffer 76 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB30_32B_WORD4,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x548++0x3 line.long 0x0 "MB51_16B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB76_8B_WORD0,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x548++0x7 line.long 0x0 "WORD076,Message Buffer 76 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB30_32B_WORD5,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x3 line.long 0x0 "MB51_16B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB76_8B_WORD1,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x7 line.long 0x0 "WORD176,Message Buffer 76 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS77,Message Buffer 77 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x550++0x3 line.long 0x0 "MB17_64B_WORD0,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB30_32B_WORD6,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB51_16B_WORD0,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x7 line.long 0x0 "MB77_8B_CS,Message Buffer 77 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID77,Message Buffer 77 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x554++0x3 line.long 0x0 "MB17_64B_WORD1,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB30_32B_WORD7,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB51_16B_WORD1,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x7 line.long 0x0 "MB77_8B_ID,Message Buffer 77 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD2,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB31_32B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x558++0x3 line.long 0x0 "MB51_16B_WORD2,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB77_8B_WORD0,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x558++0x7 line.long 0x0 "WORD077,Message Buffer 77 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD3,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB31_32B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x55C++0x3 line.long 0x0 "MB51_16B_WORD3,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB77_8B_WORD1,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x7 line.long 0x0 "WORD177,Message Buffer 77 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS78,Message Buffer 78 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x3 line.long 0x0 "MB17_64B_WORD4,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB31_32B_WORD0,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB52_16B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x7 line.long 0x0 "MB78_8B_CS,Message Buffer 78 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID78,Message Buffer 78 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x3 line.long 0x0 "MB17_64B_WORD5,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB31_32B_WORD1,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB52_16B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x7 line.long 0x0 "MB78_8B_ID,Message Buffer 78 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD6,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB31_32B_WORD2,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB52_16B_WORD0,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB78_8B_WORD0,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x7 line.long 0x0 "WORD078,Message Buffer 78 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD7,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB31_32B_WORD3,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB52_16B_WORD1,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB78_8B_WORD1,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x7 line.long 0x0 "WORD178,Message Buffer 78 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS79,Message Buffer 79 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x570++0x3 line.long 0x0 "MB17_64B_WORD8,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB31_32B_WORD4,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB52_16B_WORD2,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x570++0x7 line.long 0x0 "MB79_8B_CS,Message Buffer 79 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID79,Message Buffer 79 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x574++0x3 line.long 0x0 "MB17_64B_WORD9,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB31_32B_WORD5,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB52_16B_WORD3,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x574++0x7 line.long 0x0 "MB79_8B_ID,Message Buffer 79 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD10,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB31_32B_WORD6,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB53_16B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x578++0x3 line.long 0x0 "MB79_8B_WORD0,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x578++0x7 line.long 0x0 "WORD079,Message Buffer 79 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD11,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB31_32B_WORD7,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB53_16B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x57C++0x3 line.long 0x0 "MB79_8B_WORD1,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x7 line.long 0x0 "WORD179,Message Buffer 79 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS80,Message Buffer 80 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB17_64B_WORD12,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x580++0x3 line.long 0x0 "MB32_32B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB53_16B_WORD0,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x580++0x7 line.long 0x0 "MB80_8B_CS,Message Buffer 80 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID80,Message Buffer 80 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB17_64B_WORD13,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x584++0x3 line.long 0x0 "MB32_32B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB53_16B_WORD1,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x584++0x7 line.long 0x0 "MB80_8B_ID,Message Buffer 80 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD14,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB32_32B_WORD0,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB53_16B_WORD2,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB80_8B_WORD0,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x7 line.long 0x0 "WORD080,Message Buffer 80 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD15,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB32_32B_WORD1,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB53_16B_WORD3,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB80_8B_WORD1,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x7 line.long 0x0 "WORD180,Message Buffer 80 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS81,Message Buffer 81 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB18_64B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB32_32B_WORD2,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x590++0x3 line.long 0x0 "MB54_16B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x7 line.long 0x0 "MB81_8B_CS,Message Buffer 81 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID81,Message Buffer 81 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB18_64B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB32_32B_WORD3,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x594++0x3 line.long 0x0 "MB54_16B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x7 line.long 0x0 "MB81_8B_ID,Message Buffer 81 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD0,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB32_32B_WORD4,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB54_16B_WORD0,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB81_8B_WORD0,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x7 line.long 0x0 "WORD081,Message Buffer 81 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD1,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB32_32B_WORD5,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB54_16B_WORD1,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB81_8B_WORD1,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x7 line.long 0x0 "WORD181,Message Buffer 81 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS82,Message Buffer 82 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A0++0x3 line.long 0x0 "MB18_64B_WORD2,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB32_32B_WORD6,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB54_16B_WORD2,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x7 line.long 0x0 "MB82_8B_CS,Message Buffer 82 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID82,Message Buffer 82 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5A4++0x3 line.long 0x0 "MB18_64B_WORD3,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB32_32B_WORD7,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB54_16B_WORD3,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x7 line.long 0x0 "MB82_8B_ID,Message Buffer 82 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD4,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x3 line.long 0x0 "MB33_32B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB55_16B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB82_8B_WORD0,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x7 line.long 0x0 "WORD082,Message Buffer 82 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD5,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x3 line.long 0x0 "MB33_32B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB55_16B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB82_8B_WORD1,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x7 line.long 0x0 "WORD182,Message Buffer 82 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS83,Message Buffer 83 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5B0++0x3 line.long 0x0 "MB18_64B_WORD6,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB33_32B_WORD0,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB55_16B_WORD0,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x7 line.long 0x0 "MB83_8B_CS,Message Buffer 83 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID83,Message Buffer 83 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5B4++0x3 line.long 0x0 "MB18_64B_WORD7,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB33_32B_WORD1,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB55_16B_WORD1,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x7 line.long 0x0 "MB83_8B_ID,Message Buffer 83 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD8,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB33_32B_WORD2,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB55_16B_WORD2,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB83_8B_WORD0,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x7 line.long 0x0 "WORD083,Message Buffer 83 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD9,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB33_32B_WORD3,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB55_16B_WORD3,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB83_8B_WORD1,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x7 line.long 0x0 "WORD183,Message Buffer 83 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS84,Message Buffer 84 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x3 line.long 0x0 "MB18_64B_WORD10,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB33_32B_WORD4,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB56_16B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x7 line.long 0x0 "MB84_8B_CS,Message Buffer 84 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID84,Message Buffer 84 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x3 line.long 0x0 "MB18_64B_WORD11,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB33_32B_WORD5,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB56_16B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x7 line.long 0x0 "MB84_8B_ID,Message Buffer 84 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD12,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB33_32B_WORD6,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB56_16B_WORD0,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB84_8B_WORD0,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x7 line.long 0x0 "WORD084,Message Buffer 84 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD13,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB33_32B_WORD7,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB56_16B_WORD1,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB84_8B_WORD1,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x7 line.long 0x0 "WORD184,Message Buffer 84 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS85,Message Buffer 85 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB18_64B_WORD14,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x3 line.long 0x0 "MB34_32B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB56_16B_WORD2,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x7 line.long 0x0 "MB85_8B_CS,Message Buffer 85 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID85,Message Buffer 85 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB18_64B_WORD15,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x3 line.long 0x0 "MB34_32B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB56_16B_WORD3,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x7 line.long 0x0 "MB85_8B_ID,Message Buffer 85 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_CS,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB34_32B_WORD0,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x3 line.long 0x0 "MB57_16B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB85_8B_WORD0,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x7 line.long 0x0 "WORD085,Message Buffer 85 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_ID,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB34_32B_WORD1,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x3 line.long 0x0 "MB57_16B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB85_8B_WORD1,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x7 line.long 0x0 "WORD185,Message Buffer 85 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS86,Message Buffer 86 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5E0++0x3 line.long 0x0 "MB19_64B_WORD0,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB34_32B_WORD2,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB57_16B_WORD0,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x7 line.long 0x0 "MB86_8B_CS,Message Buffer 86 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID86,Message Buffer 86 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5E4++0x3 line.long 0x0 "MB19_64B_WORD1,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB34_32B_WORD3,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB57_16B_WORD1,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x7 line.long 0x0 "MB86_8B_ID,Message Buffer 86 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD2,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB34_32B_WORD4,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB57_16B_WORD2,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB86_8B_WORD0,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x7 line.long 0x0 "WORD086,Message Buffer 86 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD3,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB34_32B_WORD5,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB57_16B_WORD3,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB86_8B_WORD1,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x7 line.long 0x0 "WORD186,Message Buffer 86 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS87,Message Buffer 87 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x3 line.long 0x0 "MB19_64B_WORD4,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB34_32B_WORD6,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB58_16B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x7 line.long 0x0 "MB87_8B_CS,Message Buffer 87 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID87,Message Buffer 87 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x3 line.long 0x0 "MB19_64B_WORD5,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB34_32B_WORD7,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB58_16B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x7 line.long 0x0 "MB87_8B_ID,Message Buffer 87 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD6,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB35_32B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F8++0x3 line.long 0x0 "MB58_16B_WORD0,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB87_8B_WORD0,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x7 line.long 0x0 "WORD087,Message Buffer 87 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD7,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB35_32B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5FC++0x3 line.long 0x0 "MB58_16B_WORD1,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB87_8B_WORD1,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x7 line.long 0x0 "WORD187,Message Buffer 87 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS88,Message Buffer 88 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x600++0x3 line.long 0x0 "MB19_64B_WORD8,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB35_32B_WORD0,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB58_16B_WORD2,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x600++0x7 line.long 0x0 "MB88_8B_CS,Message Buffer 88 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID88,Message Buffer 88 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x604++0x3 line.long 0x0 "MB19_64B_WORD9,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB35_32B_WORD1,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB58_16B_WORD3,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x604++0x7 line.long 0x0 "MB88_8B_ID,Message Buffer 88 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD10,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB35_32B_WORD2,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB59_16B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x608++0x3 line.long 0x0 "MB88_8B_WORD0,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x608++0x7 line.long 0x0 "WORD088,Message Buffer 88 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD11,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB35_32B_WORD3,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB59_16B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x60C++0x3 line.long 0x0 "MB88_8B_WORD1,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x7 line.long 0x0 "WORD188,Message Buffer 88 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS89,Message Buffer 89 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x610++0x3 line.long 0x0 "MB19_64B_WORD12,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB35_32B_WORD4,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB59_16B_WORD0,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x610++0x7 line.long 0x0 "MB89_8B_CS,Message Buffer 89 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID89,Message Buffer 89 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x614++0x3 line.long 0x0 "MB19_64B_WORD13,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB35_32B_WORD5,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB59_16B_WORD1,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x614++0x7 line.long 0x0 "MB89_8B_ID,Message Buffer 89 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD14,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB35_32B_WORD6,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB59_16B_WORD2,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB89_8B_WORD0,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x618++0x7 line.long 0x0 "WORD089,Message Buffer 89 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD15,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB35_32B_WORD7,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB59_16B_WORD3,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB89_8B_WORD1,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x7 line.long 0x0 "WORD189,Message Buffer 89 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS90,Message Buffer 90 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB20_64B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB60_16B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x7 line.long 0x0 "MB90_8B_CS,Message Buffer 90 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID90,Message Buffer 90 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB20_64B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB60_16B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x7 line.long 0x0 "MB90_8B_ID,Message Buffer 90 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD0,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB60_16B_WORD0,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB90_8B_WORD0,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x7 line.long 0x0 "WORD090,Message Buffer 90 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD1,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB60_16B_WORD1,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB90_8B_WORD1,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x7 line.long 0x0 "WORD190,Message Buffer 90 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS91,Message Buffer 91 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x630++0x3 line.long 0x0 "MB20_64B_WORD2,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x3 line.long 0x0 "MB60_16B_WORD2,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x7 line.long 0x0 "MB91_8B_CS,Message Buffer 91 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID91,Message Buffer 91 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x634++0x3 line.long 0x0 "MB20_64B_WORD3,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x3 line.long 0x0 "MB60_16B_WORD3,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x7 line.long 0x0 "MB91_8B_ID,Message Buffer 91 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD4,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x638++0x3 line.long 0x0 "MB61_16B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x638++0x3 line.long 0x0 "MB91_8B_WORD0,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x638++0x7 line.long 0x0 "WORD091,Message Buffer 91 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD5,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x3 line.long 0x0 "MB61_16B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x63C++0x3 line.long 0x0 "MB91_8B_WORD1,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x7 line.long 0x0 "WORD191,Message Buffer 91 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS92,Message Buffer 92 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x640++0x3 line.long 0x0 "MB20_64B_WORD6,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x640++0x3 line.long 0x0 "MB61_16B_WORD0,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x640++0x7 line.long 0x0 "MB92_8B_CS,Message Buffer 92 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID92,Message Buffer 92 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x644++0x3 line.long 0x0 "MB20_64B_WORD7,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x644++0x3 line.long 0x0 "MB61_16B_WORD1,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x644++0x7 line.long 0x0 "MB92_8B_ID,Message Buffer 92 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD8,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB61_16B_WORD2,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB92_8B_WORD0,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x648++0x7 line.long 0x0 "WORD092,Message Buffer 92 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD9,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB61_16B_WORD3,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB92_8B_WORD1,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x7 line.long 0x0 "WORD192,Message Buffer 92 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS93,Message Buffer 93 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x3 line.long 0x0 "MB20_64B_WORD10,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x650++0x3 line.long 0x0 "MB62_16B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x7 line.long 0x0 "MB93_8B_CS,Message Buffer 93 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID93,Message Buffer 93 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x3 line.long 0x0 "MB20_64B_WORD11,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x654++0x3 line.long 0x0 "MB62_16B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x7 line.long 0x0 "MB93_8B_ID,Message Buffer 93 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD12,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB62_16B_WORD0,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB93_8B_WORD0,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x7 line.long 0x0 "WORD093,Message Buffer 93 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD13,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB62_16B_WORD1,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB93_8B_WORD1,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x7 line.long 0x0 "WORD193,Message Buffer 93 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS94,Message Buffer 94 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x660++0x3 line.long 0x0 "MB20_64B_WORD14,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x660++0x3 line.long 0x0 "MB62_16B_WORD2,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x660++0x7 line.long 0x0 "MB94_8B_CS,Message Buffer 94 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID94,Message Buffer 94 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x664++0x3 line.long 0x0 "MB20_64B_WORD15,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x664++0x3 line.long 0x0 "MB62_16B_WORD3,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x664++0x7 line.long 0x0 "MB94_8B_ID,Message Buffer 94 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB94_8B_WORD0,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x668++0x7 line.long 0x0 "WORD094,Message Buffer 94 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB94_8B_WORD1,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x66C++0x7 line.long 0x0 "WORD194,Message Buffer 94 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS95,Message Buffer 95 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x670++0x7 line.long 0x0 "MB95_8B_CS,Message Buffer 95 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID95,Message Buffer 95 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x674++0x7 line.long 0x0 "MB95_8B_ID,Message Buffer 95 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB95_8B_WORD0,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x678++0x7 line.long 0x0 "WORD095,Message Buffer 95 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB95_8B_WORD1,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x67C++0x3 line.long 0x0 "WORD195,Message Buffer 95 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "RXIMR[$1],Rx Individual Mask Registers" hexmask.long 0x0 0.--31. 1. "MI,Individual Mask Bits" repeat.end group.long 0xAE0++0xF line.long 0x0 "MECR,Memory Error Control Register" bitfld.long 0x0 31. "ECRWRDIS,Error Configuration Register Write Disable" "0: Write is enabled.,1: Write is disabled." bitfld.long 0x0 19. "HANCEI_MSK,Host Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 18. "FANCEI_MSK,FlexCAN Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." bitfld.long 0x0 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 15. "HAERRIE,Host Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." bitfld.long 0x0 14. "FAERRIE,FlexCAN Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." newline bitfld.long 0x0 13. "EXTERRIE,Extended Error Injection Enable" "0: Error injection is applied only to the 32-bit..,1: Error injection is applied to the 64-bit word." bitfld.long 0x0 9. "RERRDIS,Error Report Disable" "0: Enable updates of the error report registers.,1: Disable updates of the error report registers." newline bitfld.long 0x0 8. "ECCDIS,Error Correction Disable" "0: Enable memory error correction.,1: Disable memory error correction." bitfld.long 0x0 7. "NCEFAFRZ,Non-Correctable Errors In FlexCAN Access Put Device In Freeze Mode" "0: Keep normal operation.,1: Put FlexCAN in Freeze mode (see section 'Freeze.." line.long 0x4 "ERRIAR,Error Injection Address Register" hexmask.long.word 0x4 2.--13. 1. "INJADDR_H,Error Injection Address High" rbitfld.long 0x4 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3" line.long 0x8 "ERRIDPR,Error Injection Data Pattern Register" hexmask.long 0x8 0.--31. 1. "DFLIP,Data flip pattern" line.long 0xC "ERRIPPR,Error Injection Parity Pattern Register" hexmask.long.byte 0xC 24.--28. 1. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" hexmask.long.byte 0xC 16.--20. 1. "PFLIP2,Parity Flip Pattern For Byte 2" newline hexmask.long.byte 0xC 8.--12. 1. "PFLIP1,Parity Flip Pattern For Byte 1" hexmask.long.byte 0xC 0.--4. 1. "PFLIP0,Parity Flip Pattern For Byte 0 (Least Significant)" rgroup.long 0xAF0++0xB line.long 0x0 "RERRAR,Error Report Address Register" bitfld.long 0x0 24. "NCE,Non-Correctable Error" "0: Reporting a correctable error,1: Reporting a non-correctable error" bitfld.long 0x0 16.--18. "SAID,SAID" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 0.--13. 1. "ERRADDR,Address Where Error Detected" line.long 0x4 "RERRDR,Error Report Data Register" hexmask.long 0x4 0.--31. 1. "RDATA,Raw data word read from memory with error" line.long 0x8 "RERRSYNR,Error Report Syndrome Register" bitfld.long 0x8 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 24.--28. 1. "SYND3,Error Syndrome For Byte 3 (most significant)" newline bitfld.long 0x8 23. "BE2,Byte Enabled For Byte 2" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 16.--20. 1. "SYND2,Error Syndrome For Byte 2" newline bitfld.long 0x8 15. "BE1,Byte Enabled For Byte 1" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 8.--12. 1. "SYND1,Error Syndrome for Byte 1" newline bitfld.long 0x8 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 0.--4. 1. "SYND0,Error Syndrome For Byte 0 (least significant)" group.long 0xAFC++0x3 line.long 0x0 "ERRSR,Error Status Register" eventfld.long 0x0 19. "HANCEIF,Host Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in host..,1: A non-correctable error was detected in a host.." eventfld.long 0x0 18. "FANCEIF,FlexCAN Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in..,1: A non-correctable error was detected in a.." newline eventfld.long 0x0 16. "CEIF,Correctable Error Interrupt Flag" "0: No correctable errors were detected so far.,1: A correctable error was detected." eventfld.long 0x0 3. "HANCEIOF,Host Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in host..,1: Overrun on non-correctable errors in host access" newline eventfld.long 0x0 2. "FANCEIOF,FlexCAN Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in FlexCAN..,1: Overrun on non-correctable errors in FlexCAN.." eventfld.long 0x0 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0: No overrun on correctable errors,1: Overrun on correctable errors" group.long 0xBF0++0x17 line.long 0x0 "EPRS,Enhanced CAN Bit Timing Prescalers" hexmask.long.word 0x0 16.--25. 1. "EDPRESDIV,Extended Data Phase Prescaler Division Factor" hexmask.long.word 0x0 0.--9. 1. "ENPRESDIV,Extended Nominal Prescaler Division Factor" line.long 0x4 "ENCBT,Enhanced Nominal CAN Bit Timing" hexmask.long.byte 0x4 22.--28. 1. "NRJW,Nominal Resynchronization Jump Width" hexmask.long.byte 0x4 12.--18. 1. "NTSEG2,Nominal Time Segment 2" newline hexmask.long.byte 0x4 0.--7. 1. "NTSEG1,Nominal Time Segment 1" line.long 0x8 "EDCBT,Enhanced Data Phase CAN bit Timing" hexmask.long.byte 0x8 22.--25. 1. "DRJW,Data Phase Resynchronization Jump Width" hexmask.long.byte 0x8 12.--15. 1. "DTSEG2,Data Phase Time Segment 2" newline hexmask.long.byte 0x8 0.--4. 1. "DTSEG1,Data Phase Segment 1" line.long 0xC "ETDC,Enhanced Transceiver Delay Compensation" bitfld.long 0xC 31. "ETDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" bitfld.long 0xC 30. "TDMDIS,Transceiver Delay Measurement Disable" "0: TDC measurement is enabled,1: TDC measurement is disabled" newline hexmask.long.byte 0xC 16.--22. 1. "ETDCOFF,Enhanced Transceiver Delay Compensation Offset" eventfld.long 0xC 15. "ETDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0xC 0.--7. 1. "ETDCVAL,Enhanced Transceiver Delay Compensation Value" line.long 0x10 "FDCTRL,CAN FD Control Register" bitfld.long 0x10 31. "FDRATE,Bit Rate Switch Enable" "0: Transmit a frame in nominal rate. The BRS bit in..,1: Transmit a frame with bit rate switching if the.." bitfld.long 0x10 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." bitfld.long 0x10 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 15. "TDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" eventfld.long 0x10 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0x10 8.--12. 1. "TDCOFF,Transceiver Delay Compensation Offset" hexmask.long.byte 0x10 0.--5. 1. "TDCVAL,Transceiver Delay Compensation Value" line.long 0x14 "FDCBT,CAN FD Bit Timing Register" hexmask.long.word 0x14 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor" bitfld.long 0x14 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x14 10.--14. 1. "FPROPSEG,Fast Propagation Segment" bitfld.long 0x14 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7" rgroup.long 0xC08++0x3 line.long 0x0 "FDCRC,CAN FD CRC Register" hexmask.long.byte 0x0 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC" hexmask.long.tbyte 0x0 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value" group.long 0xC0C++0xB line.long 0x0 "ERFCR,Enhanced Rx FIFO Control Register" bitfld.long 0x0 31. "ERFEN,Enhanced Rx FIFO enable" "0: Enhanced Rx FIFO is disabled,1: Enhanced Rx FIFO is enabled" hexmask.long.byte 0x0 26.--30. 1. "DMALW,DMA Last Word" newline hexmask.long.byte 0x0 16.--22. 1. "NEXIF,Number of Extended ID Filter Elements" hexmask.long.byte 0x0 8.--13. 1. "NFE,Number of Enhanced Rx FIFO Filter Elements" newline hexmask.long.byte 0x0 0.--4. 1. "ERFWM,Enhanced Rx FIFO Watermark" line.long 0x4 "ERFIER,Enhanced Rx FIFO Interrupt Enable Register" bitfld.long 0x4 31. "ERFUFWIE,Enhanced Rx FIFO Underflow Interrupt Enable" "0: Enhanced Rx FIFO Underflow interrupt is disabled,1: Enhanced Rx FIFO Underflow interrupt is enabled" bitfld.long 0x4 30. "ERFOVFIE,Enhanced Rx FIFO Overflow Interrupt Enable" "0: Enhanced Rx FIFO Overflow is disabled,1: Enhanced Rx FIFO Overflow is enabled" newline bitfld.long 0x4 29. "ERFWMIIE,Enhanced Rx FIFO Watermark Indication Interrupt Enable" "0: Enhanced Rx FIFO Watermark interrupt is disabled,1: Enhanced Rx FIFO Watermark interrupt is enabled" bitfld.long 0x4 28. "ERFDAIE,Enhanced Rx FIFO Data Available Interrupt Enable" "0: Enhanced Rx FIFO Data Available interrupt is..,1: Enhanced Rx FIFO Data Available interrupt is.." line.long 0x8 "ERFSR,Enhanced Rx FIFO Status Register" eventfld.long 0x8 31. "ERFUFW,Enhanced Rx FIFO Underflow" "0: No such occurrence,1: Enhanced Rx FIFO underflow" eventfld.long 0x8 30. "ERFOVF,Enhanced Rx FIFO Overflow" "0: No such occurrence,1: Enhanced Rx FIFO overflow" newline eventfld.long 0x8 29. "ERFWMI,Enhanced Rx FIFO Watermark Indication" "0: No such occurrence,1: The number of messages in FIFO is greater than.." eventfld.long 0x8 28. "ERFDA,Enhanced Rx FIFO Data Available" "0: No such occurrence,1: There is at least one message stored in Enhanced.." newline bitfld.long 0x8 27. "ERFCLR,Enhanced Rx FIFO Clear" "0: No effect,1: Clear Enhanced Rx FIFO content" rbitfld.long 0x8 17. "ERFE,Enhanced Rx FIFO empty" "0: Enhanced Rx FIFO is not empty,1: Enhanced Rx FIFO is empty" newline rbitfld.long 0x8 16. "ERFF,Enhanced Rx FIFO full" "0: Enhanced Rx FIFO is not full,1: Enhanced Rx FIFO is full" hexmask.long.byte 0x8 0.--5. 1. "ERFEL,Enhanced Rx FIFO Elements" repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC30)++0x3 line.long 0x0 "HR_TIME_STAMP[$1],High Resolution Time Stamp" hexmask.long 0x0 0.--31. 1. "TS,High Resolution Time Stamp" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x3000)++0x3 line.long 0x0 "ERFFEL[$1],Enhanced Rx FIFO Filter Element" hexmask.long 0x0 0.--31. 1. "FEL,Filter Element Bits" repeat.end tree.end tree "AON_CMU" tree "AON_CMUA1" base ad:0x44540000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree "AON_CMUA2" base ad:0x44650000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree.end tree "AON_CRC" base ad:0x44660000 group.long 0x0++0xB line.long 0x0 "CFG1,Configuration Register" bitfld.long 0x0 5. "SWAP_BYTEWISE,Swap CRC_INP byte-wise" "0: Do not swap,1: Perform byte-wise swap on CRC_INP input data.." bitfld.long 0x0 4. "SWAP_BITWISE,Swap CRC_INP bit-wise" "0: Do not swap,1: Perform bit-wise swap on CRC_INP input data.." newline bitfld.long 0x0 2.--3. "POLYG,Polynomial selection" "0: CRC-CCITT polynomial,1: CRC-32 polynomial,2: CRC-8 polynomial,3: CRC-8-H2F AUTOSAR polynomial" bitfld.long 0x0 1. "SWAP,Swap selection" "0: No swap selection applied on the CRC_OUTP content,1: Swap selection (MSB to LSB LSB to MSB) applied.." newline bitfld.long 0x0 0. "INV,Inversion selection" "0: No inversion selection applied on the CRC_OUTP..,1: Inversion selection (bit x bit) applied on the.." line.long 0x4 "INP1,Input Register" hexmask.long 0x4 0.--31. 1. "INP,Input data for the CRC computation" line.long 0x8 "CSTAT1,Current Status Register" hexmask.long 0x8 0.--31. 1. "CSTAT,CRC signature status" rgroup.long 0xC++0x3 line.long 0x0 "OUTP1,Output Register" hexmask.long 0x0 0.--31. 1. "OUTP,Final CRC signature" group.long 0x10++0xB line.long 0x0 "CFG2,Configuration Register" bitfld.long 0x0 5. "SWAP_BYTEWISE,Swap CRC_INP byte-wise" "0: Do not swap,1: Perform byte-wise swap on CRC_INP input data.." bitfld.long 0x0 4. "SWAP_BITWISE,Swap CRC_INP bit-wise" "0: Do not swap,1: Perform bit-wise swap on CRC_INP input data.." newline bitfld.long 0x0 2.--3. "POLYG,Polynomial selection" "0: CRC-CCITT polynomial,1: CRC-32 polynomial,2: CRC-8 polynomial,3: CRC-8-H2F AUTOSAR polynomial" bitfld.long 0x0 1. "SWAP,Swap selection" "0: No swap selection applied on the CRC_OUTP content,1: Swap selection (MSB to LSB LSB to MSB) applied.." newline bitfld.long 0x0 0. "INV,Inversion selection" "0: No inversion selection applied on the CRC_OUTP..,1: Inversion selection (bit x bit) applied on the.." line.long 0x4 "INP2,Input Register" hexmask.long 0x4 0.--31. 1. "INP,Input data for the CRC computation" line.long 0x8 "CSTAT2,Current Status Register" hexmask.long 0x8 0.--31. 1. "CSTAT,CRC signature status" rgroup.long 0x1C++0x3 line.long 0x0 "OUTP2,Output Register" hexmask.long 0x0 0.--31. 1. "OUTP,Final CRC signature" group.long 0x20++0xB line.long 0x0 "CFG3,Configuration Register" bitfld.long 0x0 5. "SWAP_BYTEWISE,Swap CRC_INP byte-wise" "0: Do not swap,1: Perform byte-wise swap on CRC_INP input data.." bitfld.long 0x0 4. "SWAP_BITWISE,Swap CRC_INP bit-wise" "0: Do not swap,1: Perform bit-wise swap on CRC_INP input data.." newline bitfld.long 0x0 2.--3. "POLYG,Polynomial selection" "0: CRC-CCITT polynomial,1: CRC-32 polynomial,2: CRC-8 polynomial,3: CRC-8-H2F AUTOSAR polynomial" bitfld.long 0x0 1. "SWAP,Swap selection" "0: No swap selection applied on the CRC_OUTP content,1: Swap selection (MSB to LSB LSB to MSB) applied.." newline bitfld.long 0x0 0. "INV,Inversion selection" "0: No inversion selection applied on the CRC_OUTP..,1: Inversion selection (bit x bit) applied on the.." line.long 0x4 "INP3,Input Register" hexmask.long 0x4 0.--31. 1. "INP,Input data for the CRC computation" line.long 0x8 "CSTAT3,Current Status Register" hexmask.long 0x8 0.--31. 1. "CSTAT,CRC signature status" rgroup.long 0x2C++0x3 line.long 0x0 "OUTP3,Output Register" hexmask.long 0x0 0.--31. 1. "OUTP,Final CRC signature" tree.end tree "AON_CSTCU" base ad:0x44590000 group.long 0x0++0x7 line.long 0x0 "RUNSWREG,Run Software" bitfld.long 0x0 0. "RUNSW,Run Software" "0: No self-test run is in progress,1: Self-test is in progress" line.long 0x4 "LSCHLVLD,LSTCU Scheduler List Valid" bitfld.long 0x4 8. "MBPLVLD,Indicates whether LMBPTR list is valid or not." "0: List is invalid. Skip MBIST scheduling.,1: List is valid." group.long 0xC++0xB line.long 0x0 "WDG,Watchdog Timer" hexmask.long 0x0 0.--31. 1. "WDGEOC,Watchddog end of counter" line.long 0x4 "IE,Interrupt Enable" bitfld.long 0x4 0. "STEND_IE,Self-test end interrupt enable at the end of self-test execution." "0: Enable interrupt indication,1: Disable interrupt indication" line.long 0x8 "IF,Interrupt Flag" eventfld.long 0x8 0. "STEND_IF,Self-test end interrupt flag" "0: No pending interrupt.,1: Interrupt which indicates end of self-test.." group.long 0x20++0x3 line.long 0x0 "ERR_STAT,Error Status" bitfld.long 0x0 17. "RFSF,Consolidated status of occurrence of recoverable fault(s)." "0: No recoverable fault has occurred.,1: A recoverable fault has occurred within CSTCU.." bitfld.long 0x0 16. "UFSF,Consolidated status of occurrence of unrecoverable fault(s)." "0: No unrecoverable fault has occurred.,1: An unrecoverable fault has occurred within CSTCU.." newline rbitfld.long 0x0 8. "ABORTHW,Hardware abort flag" "0: No hardware abort request detected during the..,1: Hardware abort request detected during the.." rbitfld.long 0x0 1. "INVP_MB,Invalid LSTCU pointer during MBIST scheduling." "0: No invalid LSTCU pointer.,1: At least one invalid LSTCU pointer specified for.." group.long 0x28++0x3 line.long 0x0 "ERR_FM,Error Fault Mapping" bitfld.long 0x0 1. "INVPFMMB,Fault mapping" "0: Recoverable fault,1: Unrecoverable fault" rgroup.long 0x30++0x3 line.long 0x0 "LRFSTAT0,LSTCU Recoverable Fault Status" bitfld.long 0x0 4. "RFSLSTCU4,Recoverable fault occurrence status from LSTCU4." "0: No recoverable fault occurred,1: Recoverable fault occurred" bitfld.long 0x0 3. "RFSLSTCU3,Recoverable fault occurrence status from LSTCU3." "0: No recoverable fault occurred,1: Recoverable fault occurred" newline bitfld.long 0x0 2. "RFSLSTCU2,Recoverable fault occurrence status from LSTCU2." "0: No recoverable fault occurred,1: Recoverable fault occurred" bitfld.long 0x0 1. "RFSLSTCU1,Recoverable fault occurrence status from LSTCU1." "0: No recoverable fault occurred,1: Recoverable fault occurred" newline bitfld.long 0x0 0. "RFSLSTCU0,Recoverable fault occurrence status from LSTCU0." "0: No recoverable fault occurred,1: Recoverable fault occurred" rgroup.long 0x40++0x3 line.long 0x0 "LUFSTAT0,LSTCU Unrecoverable Fault Status" bitfld.long 0x0 4. "UFSLSTCU4,Unrecoverable fault occurrence status from LSTCU4." "0: No unrecoverable fault occurred,1: Unrecoverable fault occurred" bitfld.long 0x0 3. "UFSLSTCU3,Unrecoverable fault occurrence status from LSTCU3." "0: No unrecoverable fault occurred,1: Unrecoverable fault occurred" newline bitfld.long 0x0 2. "UFSLSTCU2,Unrecoverable fault occurrence status from LSTCU2." "0: No unrecoverable fault occurred,1: Unrecoverable fault occurred" bitfld.long 0x0 1. "UFSLSTCU1,Unrecoverable fault occurrence status from LSTCU1." "0: No unrecoverable fault occurred,1: Unrecoverable fault occurred" newline bitfld.long 0x0 0. "UFSLSTCU0,Unrecoverable fault occurrence status from LSTCU0." "0: No unrecoverable fault occurred,1: Unrecoverable fault occurred" group.long 0x50++0x3 line.long 0x0 "RDEN,Reset Domain Self-test Enable" bitfld.long 0x0 2. "SERD2,Enable self-test in reset domain 2." "0: Self-test is disabled,1: Self-test is enabled" bitfld.long 0x0 1. "SERD1,Enable self-test in reset domain 1." "0: Self-test is disabled,1: Self-test is enabled" newline bitfld.long 0x0 0. "SERD0,Enable self-test in reset domain 0." "0: Self-test is disabled,1: Self-test is enabled" rgroup.long 0x54++0x7 line.long 0x0 "RDENSTAT,Reset Domain Enable Status" bitfld.long 0x0 2. "SESRD2,Self-test enable status in reset domain 2." "0: Self-test is disabled,1: Self-test is enabled" bitfld.long 0x0 1. "SESRD1,Self-test enable status in reset domain 1." "0: Self-test is disabled,1: Self-test is enabled" newline bitfld.long 0x0 0. "SESRD0,Self-test enable status in reset domain 0." "0: Self-test is disabled,1: Self-test is enabled" line.long 0x4 "LASTRDEN,Last Run Reset Domain Enable" bitfld.long 0x4 2. "LRSERD2,Last run self-test enable status in reset domain 2." "0: Self-test was not disabled in the last run.,1: Self-test was enabled in the last run." bitfld.long 0x4 1. "LRSERD1,Last run self-test enable status in reset domain 1." "0: Self-test was not disabled in the last run.,1: Self-test was enabled in the last run." newline bitfld.long 0x4 0. "LRSERD0,Last run self-test enable status in reset domain 0." "0: Self-test was not disabled in the last run.,1: Self-test was enabled in the last run." group.long 0x60++0x3 line.long 0x0 "BYPLSTCU0,Bypass LSTCU" bitfld.long 0x0 4. "BYP_L4,Bypass LSTCU 4" "0: No Bypass,1: Bypass" bitfld.long 0x0 3. "BYP_L3,Bypass LSTCU 3" "0: No Bypass,1: Bypass" newline bitfld.long 0x0 2. "BYP_L2,Bypass LSTCU 2" "0: No Bypass,1: Bypass" bitfld.long 0x0 1. "BYP_L1,Bypass LSTCU 1" "0: No Bypass,1: Bypass" newline bitfld.long 0x0 0. "BYP_L0,Bypass LSTCU 0" "0: No Bypass,1: Bypass" group.long 0x70++0x3 line.long 0x0 "STAG,Stagger" hexmask.long.byte 0x0 8.--15. 1. "MB_DELAY,MBIST delay" repeat 5. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "LMBPTR[$1],LSTCU MBIST Run phase Scheduler Pointer" bitfld.long 0x0 31. "MBEOL,MBIST End of List" "0: Not end of list,1: End of list" bitfld.long 0x0 8. "MBCSM,MBIST Concurrent or Sequential Mode" "0: Sequential mode,1: Concurrent mode" newline hexmask.long.byte 0x0 0.--7. 1. "MBPTR,LSTCU pointer scheduled during MBIST run phase." repeat.end tree.end tree "AON_EDMA3_MP" base ad:0x44000000 group.long 0x0++0x3 line.long 0x0 "MP_CSR,Management Page Control" rbitfld.long 0x0 31. "ACTIVE,DMA Active Status" "0: eDMA is idle,1: eDMA is executing a channel" hexmask.long.byte 0x0 24.--28. 1. "ACTIVE_ID,Active Channel ID" newline bitfld.long 0x0 9. "CX,Cancel Transfer" "0: Normal operation,1: Cancel the remaining data transfer" bitfld.long 0x0 8. "ECX,Cancel Transfer With Error" "0: Normal operation,1: Cancel the remaining data transfer" newline bitfld.long 0x0 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication disabled for all channels,1: Master ID replication available and controlled.." bitfld.long 0x0 6. "GCLC,Global Channel Linking Control" "0: Channel linking disabled for all channels,1: Channel linking available and controlled by each.." newline bitfld.long 0x0 5. "HALT,Halt DMA Operations" "0: Normal operation,1: Stall the start of any new channels" bitfld.long 0x0 4. "HAE,Halt After Error" "0: Normal operation,1: Any error causes the HALT field to be set to 1" newline bitfld.long 0x0 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round-robin channel arbitration disabled,1: Round-robin channel arbitration enabled" bitfld.long 0x0 1. "EDBG,Enable Debug" "0: Debug mode disabled,1: Debug mode is enabled." rgroup.long 0x4++0xB line.long 0x0 "MP_ES,Management Page Error Status" bitfld.long 0x0 31. "VLD,Valid" "0: No CHn_ES[ERR] fields are set to 1,1: At least one CHn_ES[ERR] field is set to 1.." hexmask.long.byte 0x0 24.--28. 1. "ERRCHN,Error Channel Number or Canceled Channel Number" newline bitfld.long 0x0 9. "UCE,Uncorrectable TCD Error During Channel Execution" "0: No uncorrectable ECC error,1: Last recorded error was an uncorrectable TCD RAM.." bitfld.long 0x0 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: Last recorded entry was a canceled transfer by.." newline bitfld.long 0x0 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x0 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x0 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x0 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x0 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to zero.." bitfld.long 0x0 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x0 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was a bus error on a source.." bitfld.long 0x0 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was a bus error on a.." line.long 0x4 "MP_INT,Management Page Interrupt Request Status" hexmask.long 0x4 0.--30. 1. "INT,Interrupt Request Status" line.long 0x8 "MP_HRS,Management Page Hardware Request Status" hexmask.long 0x8 0.--31. 1. "HRS,Hardware Request Status" repeat 31. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CH_GRPRI[$1],Channel Arbitration Group" hexmask.long.byte 0x0 0.--4. 1. "GRPRI,Arbitration Group For Channel n" repeat.end tree.end tree "AON_EDMA3_TCD" base ad:0x44010000 group.long 0x0++0x13 line.long 0x0 "CH0_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH0_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH0_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH0_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH0_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20++0x3 line.long 0x0 "TCD0_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x24++0x3 line.word 0x0 "TCD0_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD0_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x28++0x3 line.long 0x0 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x28++0xB line.long 0x0 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD0_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x34++0x3 line.word 0x0 "TCD0_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x36++0x1 line.word 0x0 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x38++0x3 line.long 0x0 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3C++0x3 line.word 0x0 "TCD0_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3E++0x1 line.word 0x0 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x10000++0x13 line.long 0x0 "CH1_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH1_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH1_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH1_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH1_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10020++0x3 line.long 0x0 "TCD1_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x10024++0x3 line.word 0x0 "TCD1_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD1_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x10028++0x3 line.long 0x0 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x10028++0xB line.long 0x0 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD1_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x10034++0x3 line.word 0x0 "TCD1_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10036++0x1 line.word 0x0 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x10038++0x3 line.long 0x0 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1003C++0x3 line.word 0x0 "TCD1_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1003E++0x1 line.word 0x0 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x20000++0x13 line.long 0x0 "CH2_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH2_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH2_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH2_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH2_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20020++0x3 line.long 0x0 "TCD2_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x20024++0x3 line.word 0x0 "TCD2_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD2_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x20028++0x3 line.long 0x0 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x20028++0xB line.long 0x0 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD2_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x20034++0x3 line.word 0x0 "TCD2_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x20036++0x1 line.word 0x0 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x20038++0x3 line.long 0x0 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x2003C++0x3 line.word 0x0 "TCD2_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2003E++0x1 line.word 0x0 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x30000++0x13 line.long 0x0 "CH3_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH3_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH3_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH3_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH3_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x30020++0x3 line.long 0x0 "TCD3_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x30024++0x3 line.word 0x0 "TCD3_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD3_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x30028++0x3 line.long 0x0 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x30028++0xB line.long 0x0 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD3_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x30034++0x3 line.word 0x0 "TCD3_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x30036++0x1 line.word 0x0 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x30038++0x3 line.long 0x0 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3003C++0x3 line.word 0x0 "TCD3_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3003E++0x1 line.word 0x0 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x40000++0x13 line.long 0x0 "CH4_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH4_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH4_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH4_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH4_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x40020++0x3 line.long 0x0 "TCD4_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x40024++0x3 line.word 0x0 "TCD4_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD4_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x40028++0x3 line.long 0x0 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x40028++0xB line.long 0x0 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD4_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x40034++0x3 line.word 0x0 "TCD4_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x40036++0x1 line.word 0x0 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x40038++0x3 line.long 0x0 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x4003C++0x3 line.word 0x0 "TCD4_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4003E++0x1 line.word 0x0 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x50000++0x13 line.long 0x0 "CH5_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH5_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH5_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH5_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH5_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x50020++0x3 line.long 0x0 "TCD5_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x50024++0x3 line.word 0x0 "TCD5_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD5_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x50028++0x3 line.long 0x0 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x50028++0xB line.long 0x0 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD5_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x50034++0x3 line.word 0x0 "TCD5_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x50036++0x1 line.word 0x0 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x50038++0x3 line.long 0x0 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x5003C++0x3 line.word 0x0 "TCD5_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5003E++0x1 line.word 0x0 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x60000++0x13 line.long 0x0 "CH6_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH6_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH6_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH6_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH6_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x60020++0x3 line.long 0x0 "TCD6_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x60024++0x3 line.word 0x0 "TCD6_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD6_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x60028++0x3 line.long 0x0 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x60028++0xB line.long 0x0 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD6_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x60034++0x3 line.word 0x0 "TCD6_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x60036++0x1 line.word 0x0 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x60038++0x3 line.long 0x0 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x6003C++0x3 line.word 0x0 "TCD6_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6003E++0x1 line.word 0x0 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x70000++0x13 line.long 0x0 "CH7_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH7_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH7_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH7_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH7_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x70020++0x3 line.long 0x0 "TCD7_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x70024++0x3 line.word 0x0 "TCD7_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD7_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x70028++0x3 line.long 0x0 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x70028++0xB line.long 0x0 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD7_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x70034++0x3 line.word 0x0 "TCD7_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x70036++0x1 line.word 0x0 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x70038++0x3 line.long 0x0 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x7003C++0x3 line.word 0x0 "TCD7_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7003E++0x1 line.word 0x0 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x80000++0x13 line.long 0x0 "CH8_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH8_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH8_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH8_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH8_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x80020++0x3 line.long 0x0 "TCD8_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x80024++0x3 line.word 0x0 "TCD8_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD8_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x80028++0x3 line.long 0x0 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x80028++0xB line.long 0x0 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD8_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x80034++0x3 line.word 0x0 "TCD8_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x80036++0x1 line.word 0x0 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x80038++0x3 line.long 0x0 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x8003C++0x3 line.word 0x0 "TCD8_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8003E++0x1 line.word 0x0 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x90000++0x13 line.long 0x0 "CH9_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH9_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH9_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH9_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH9_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x90020++0x3 line.long 0x0 "TCD9_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x90024++0x3 line.word 0x0 "TCD9_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD9_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x90028++0x3 line.long 0x0 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x90028++0xB line.long 0x0 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD9_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x90034++0x3 line.word 0x0 "TCD9_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x90036++0x1 line.word 0x0 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x90038++0x3 line.long 0x0 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x9003C++0x3 line.word 0x0 "TCD9_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9003E++0x1 line.word 0x0 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xA0000++0x13 line.long 0x0 "CH10_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH10_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH10_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH10_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH10_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA0020++0x3 line.long 0x0 "TCD10_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0xA0024++0x3 line.word 0x0 "TCD10_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD10_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xA0028++0x3 line.long 0x0 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA0028++0xB line.long 0x0 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD10_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0xA0034++0x3 line.word 0x0 "TCD10_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA0036++0x1 line.word 0x0 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xA0038++0x3 line.long 0x0 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xA003C++0x3 line.word 0x0 "TCD10_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA003E++0x1 line.word 0x0 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xB0000++0x13 line.long 0x0 "CH11_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH11_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH11_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH11_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH11_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB0020++0x3 line.long 0x0 "TCD11_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0xB0024++0x3 line.word 0x0 "TCD11_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD11_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xB0028++0x3 line.long 0x0 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB0028++0xB line.long 0x0 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD11_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0xB0034++0x3 line.word 0x0 "TCD11_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB0036++0x1 line.word 0x0 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xB0038++0x3 line.long 0x0 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xB003C++0x3 line.word 0x0 "TCD11_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB003E++0x1 line.word 0x0 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xC0000++0x13 line.long 0x0 "CH12_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH12_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH12_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH12_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH12_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC0020++0x3 line.long 0x0 "TCD12_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0xC0024++0x3 line.word 0x0 "TCD12_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD12_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xC0028++0x3 line.long 0x0 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC0028++0xB line.long 0x0 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD12_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0xC0034++0x3 line.word 0x0 "TCD12_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC0036++0x1 line.word 0x0 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xC0038++0x3 line.long 0x0 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xC003C++0x3 line.word 0x0 "TCD12_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC003E++0x1 line.word 0x0 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xD0000++0x13 line.long 0x0 "CH13_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH13_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH13_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH13_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH13_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD0020++0x3 line.long 0x0 "TCD13_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0xD0024++0x3 line.word 0x0 "TCD13_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD13_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xD0028++0x3 line.long 0x0 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD0028++0xB line.long 0x0 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD13_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0xD0034++0x3 line.word 0x0 "TCD13_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD0036++0x1 line.word 0x0 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xD0038++0x3 line.long 0x0 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xD003C++0x3 line.word 0x0 "TCD13_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD003E++0x1 line.word 0x0 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xE0000++0x13 line.long 0x0 "CH14_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH14_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH14_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH14_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH14_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE0020++0x3 line.long 0x0 "TCD14_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0xE0024++0x3 line.word 0x0 "TCD14_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD14_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xE0028++0x3 line.long 0x0 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE0028++0xB line.long 0x0 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD14_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0xE0034++0x3 line.word 0x0 "TCD14_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE0036++0x1 line.word 0x0 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xE0038++0x3 line.long 0x0 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xE003C++0x3 line.word 0x0 "TCD14_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE003E++0x1 line.word 0x0 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xF0000++0x13 line.long 0x0 "CH15_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH15_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH15_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH15_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH15_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF0020++0x3 line.long 0x0 "TCD15_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0xF0024++0x3 line.word 0x0 "TCD15_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD15_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xF0028++0x3 line.long 0x0 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF0028++0xB line.long 0x0 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD15_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0xF0034++0x3 line.word 0x0 "TCD15_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF0036++0x1 line.word 0x0 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xF0038++0x3 line.long 0x0 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xF003C++0x3 line.word 0x0 "TCD15_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF003E++0x1 line.word 0x0 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x100000++0x13 line.long 0x0 "CH16_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH16_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH16_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH16_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH16_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x100020++0x3 line.long 0x0 "TCD16_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x100024++0x3 line.word 0x0 "TCD16_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD16_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x100028++0x3 line.long 0x0 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x100028++0xB line.long 0x0 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD16_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x100034++0x3 line.word 0x0 "TCD16_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x100036++0x1 line.word 0x0 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x100038++0x3 line.long 0x0 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x10003C++0x3 line.word 0x0 "TCD16_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10003E++0x1 line.word 0x0 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x110000++0x13 line.long 0x0 "CH17_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH17_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH17_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH17_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH17_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x110020++0x3 line.long 0x0 "TCD17_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x110024++0x3 line.word 0x0 "TCD17_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD17_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x110028++0x3 line.long 0x0 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x110028++0xB line.long 0x0 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD17_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x110034++0x3 line.word 0x0 "TCD17_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x110036++0x1 line.word 0x0 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x110038++0x3 line.long 0x0 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x11003C++0x3 line.word 0x0 "TCD17_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11003E++0x1 line.word 0x0 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x120000++0x13 line.long 0x0 "CH18_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH18_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH18_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH18_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH18_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x120020++0x3 line.long 0x0 "TCD18_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x120024++0x3 line.word 0x0 "TCD18_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD18_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x120028++0x3 line.long 0x0 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x120028++0xB line.long 0x0 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD18_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x120034++0x3 line.word 0x0 "TCD18_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x120036++0x1 line.word 0x0 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x120038++0x3 line.long 0x0 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x12003C++0x3 line.word 0x0 "TCD18_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12003E++0x1 line.word 0x0 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x130000++0x13 line.long 0x0 "CH19_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH19_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH19_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH19_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH19_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x130020++0x3 line.long 0x0 "TCD19_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x130024++0x3 line.word 0x0 "TCD19_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD19_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x130028++0x3 line.long 0x0 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x130028++0xB line.long 0x0 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD19_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x130034++0x3 line.word 0x0 "TCD19_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x130036++0x1 line.word 0x0 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x130038++0x3 line.long 0x0 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x13003C++0x3 line.word 0x0 "TCD19_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13003E++0x1 line.word 0x0 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x140000++0x13 line.long 0x0 "CH20_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH20_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH20_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH20_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH20_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x140020++0x3 line.long 0x0 "TCD20_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x140024++0x3 line.word 0x0 "TCD20_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD20_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x140028++0x3 line.long 0x0 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x140028++0xB line.long 0x0 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD20_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x140034++0x3 line.word 0x0 "TCD20_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x140036++0x1 line.word 0x0 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x140038++0x3 line.long 0x0 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x14003C++0x3 line.word 0x0 "TCD20_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14003E++0x1 line.word 0x0 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x150000++0x13 line.long 0x0 "CH21_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH21_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH21_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH21_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH21_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x150020++0x3 line.long 0x0 "TCD21_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x150024++0x3 line.word 0x0 "TCD21_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD21_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x150028++0x3 line.long 0x0 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x150028++0xB line.long 0x0 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD21_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x150034++0x3 line.word 0x0 "TCD21_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x150036++0x1 line.word 0x0 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x150038++0x3 line.long 0x0 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x15003C++0x3 line.word 0x0 "TCD21_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15003E++0x1 line.word 0x0 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x160000++0x13 line.long 0x0 "CH22_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH22_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH22_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH22_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH22_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x160020++0x3 line.long 0x0 "TCD22_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x160024++0x3 line.word 0x0 "TCD22_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD22_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x160028++0x3 line.long 0x0 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x160028++0xB line.long 0x0 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD22_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x160034++0x3 line.word 0x0 "TCD22_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x160036++0x1 line.word 0x0 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x160038++0x3 line.long 0x0 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x16003C++0x3 line.word 0x0 "TCD22_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16003E++0x1 line.word 0x0 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x170000++0x13 line.long 0x0 "CH23_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH23_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH23_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH23_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH23_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x170020++0x3 line.long 0x0 "TCD23_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x170024++0x3 line.word 0x0 "TCD23_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD23_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x170028++0x3 line.long 0x0 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x170028++0xB line.long 0x0 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD23_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x170034++0x3 line.word 0x0 "TCD23_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x170036++0x1 line.word 0x0 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x170038++0x3 line.long 0x0 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x17003C++0x3 line.word 0x0 "TCD23_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17003E++0x1 line.word 0x0 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x180000++0x13 line.long 0x0 "CH24_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH24_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH24_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH24_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH24_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x180020++0x3 line.long 0x0 "TCD24_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x180024++0x3 line.word 0x0 "TCD24_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD24_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x180028++0x3 line.long 0x0 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x180028++0xB line.long 0x0 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD24_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x180034++0x3 line.word 0x0 "TCD24_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x180036++0x1 line.word 0x0 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x180038++0x3 line.long 0x0 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x18003C++0x3 line.word 0x0 "TCD24_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18003E++0x1 line.word 0x0 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x190000++0x13 line.long 0x0 "CH25_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH25_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH25_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH25_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH25_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x190020++0x3 line.long 0x0 "TCD25_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x190024++0x3 line.word 0x0 "TCD25_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD25_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x190028++0x3 line.long 0x0 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x190028++0xB line.long 0x0 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD25_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x190034++0x3 line.word 0x0 "TCD25_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x190036++0x1 line.word 0x0 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x190038++0x3 line.long 0x0 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x19003C++0x3 line.word 0x0 "TCD25_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19003E++0x1 line.word 0x0 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1A0000++0x13 line.long 0x0 "CH26_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH26_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH26_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH26_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH26_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A0020++0x3 line.long 0x0 "TCD26_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x1A0024++0x3 line.word 0x0 "TCD26_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD26_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1A0028++0x3 line.long 0x0 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A0028++0xB line.long 0x0 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD26_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x1A0034++0x3 line.word 0x0 "TCD26_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A0036++0x1 line.word 0x0 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1A0038++0x3 line.long 0x0 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1A003C++0x3 line.word 0x0 "TCD26_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A003E++0x1 line.word 0x0 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1B0000++0x13 line.long 0x0 "CH27_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH27_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH27_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH27_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH27_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B0020++0x3 line.long 0x0 "TCD27_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x1B0024++0x3 line.word 0x0 "TCD27_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD27_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1B0028++0x3 line.long 0x0 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B0028++0xB line.long 0x0 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD27_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x1B0034++0x3 line.word 0x0 "TCD27_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B0036++0x1 line.word 0x0 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1B0038++0x3 line.long 0x0 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1B003C++0x3 line.word 0x0 "TCD27_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B003E++0x1 line.word 0x0 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1C0000++0x13 line.long 0x0 "CH28_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH28_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH28_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH28_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH28_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C0020++0x3 line.long 0x0 "TCD28_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x1C0024++0x3 line.word 0x0 "TCD28_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD28_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1C0028++0x3 line.long 0x0 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C0028++0xB line.long 0x0 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD28_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x1C0034++0x3 line.word 0x0 "TCD28_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C0036++0x1 line.word 0x0 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1C0038++0x3 line.long 0x0 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1C003C++0x3 line.word 0x0 "TCD28_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C003E++0x1 line.word 0x0 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1D0000++0x13 line.long 0x0 "CH29_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH29_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH29_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH29_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH29_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D0020++0x3 line.long 0x0 "TCD29_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x1D0024++0x3 line.word 0x0 "TCD29_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD29_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1D0028++0x3 line.long 0x0 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D0028++0xB line.long 0x0 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD29_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x1D0034++0x3 line.word 0x0 "TCD29_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D0036++0x1 line.word 0x0 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1D0038++0x3 line.long 0x0 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1D003C++0x3 line.word 0x0 "TCD29_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D003E++0x1 line.word 0x0 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1E0000++0x13 line.long 0x0 "CH30_CSR,Channel Control and Status" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x0 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does not..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request" "0: Disable asynchronous DMA request for the channel,1: Enable asynchronous DMA request for the channel" bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." line.long 0x4 "CH30_ES,Channel Error Status" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source read" newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on destination.." line.long 0x8 "CH30_INT,Channel Interrupt Status" eventfld.long 0x8 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel active" line.long 0xC "CH30_SBR,Channel System Bus" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" bitfld.long 0xC 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0xC 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline hexmask.long.byte 0xC 0.--3. 1. "MID,Master ID" line.long 0x10 "CH30_PRI,Channel Priority" bitfld.long 0x10 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a higher-priority..,1: Channel can be temporarily suspended by a.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E0020++0x3 line.long 0x0 "TCD30_SADDR,TCD Source Address" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address" group.word 0x1E0024++0x3 line.word 0x0 "TCD30_SOFF,TCD Signed Source Address Offset" hexmask.word 0x0 0.--15. 1. "SOFF,Source Address Signed Offset" line.word 0x2 "TCD30_ATTR,TCD Transfer Attributes" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source Address Modulo" bitfld.word 0x2 8.--10. "SSIZE,Source Data Transfer Size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,?" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination Address Modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1E0028++0x3 line.long 0x0 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E0028++0xB line.long 0x0 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" line.long 0x4 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" line.long 0x8 "TCD30_DADDR,TCD Destination Address" hexmask.long 0x8 0.--31. 1. "DADDR,Destination Address" group.word 0x1E0034++0x3 line.word 0x0 "TCD30_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E0036++0x1 line.word 0x0 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1E0038++0x3 line.long 0x0 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x0 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1E003C++0x3 line.word 0x0 "TCD30_CSR,TCD Control and Status" bitfld.word 0x0 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" hexmask.word.byte 0x0 8.--12. 1. "MAJORLINKCH,Major Loop Link Channel Number" newline bitfld.word 0x0 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to system..,1: Ability to store destination address to system.." bitfld.word 0x0 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x0 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x0 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies scatter/gather.." newline bitfld.word 0x0 3. "DREQ,Disable Request" "0: No operation,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x0 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x0 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x0 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." line.word 0x2 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x2 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x2 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E003E++0x1 line.word 0x0 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x0 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting Major Iteration Count" tree.end tree "AON_EIM" base ad:0x44550000 group.long 0x0++0x7 line.long 0x0 "EIMCR,Error Injection Module Configuration Register" bitfld.long 0x0 0. "GEIEN,Global Error Injection Enable" "0: Disabled,1: Enabled" line.long 0x4 "EICHEN,Error Injection Channel Enable register" bitfld.long 0x4 31. "EICH0EN,Error Injection Channel 0 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 30. "EICH1EN,Error Injection Channel 1 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 29. "EICH2EN,Error Injection Channel 2 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 28. "EICH3EN,Error Injection Channel 3 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 27. "EICH4EN,Error Injection Channel 4 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 26. "EICH5EN,Error Injection Channel 5 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 25. "EICH6EN,Error Injection Channel 6 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 24. "EICH7EN,Error Injection Channel 7 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 23. "EICH8EN,Error Injection Channel 8 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 22. "EICH9EN,Error Injection Channel 9 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 21. "EICH10EN,Error Injection Channel 10 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 20. "EICH11EN,Error Injection Channel 11 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 19. "EICH12EN,Error Injection Channel 12 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." group.long 0x100++0x7 line.long 0x0 "EICHD0_WORD0,Error Injection Channel Descriptor 0. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD0_WORD1,Error Injection Channel Descriptor 0. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x140++0x7 line.long 0x0 "EICHD1_WORD0,Error Injection Channel Descriptor 1. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD1_WORD1,Error Injection Channel Descriptor 1. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x180++0x7 line.long 0x0 "EICHD2_WORD0,Error Injection Channel Descriptor 2. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD2_WORD1,Error Injection Channel Descriptor 2. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x1C0++0x7 line.long 0x0 "EICHD3_WORD0,Error Injection Channel Descriptor 3. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD3_WORD1,Error Injection Channel Descriptor 3. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x200++0x7 line.long 0x0 "EICHD4_WORD0,Error Injection Channel Descriptor 4. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD4_WORD1,Error Injection Channel Descriptor 4. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x240++0x7 line.long 0x0 "EICHD5_WORD0,Error Injection Channel Descriptor 5. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD5_WORD1,Error Injection Channel Descriptor 5. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x280++0x7 line.long 0x0 "EICHD6_WORD0,Error Injection Channel Descriptor 6. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD6_WORD1,Error Injection Channel Descriptor 6. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x2C0++0x7 line.long 0x0 "EICHD7_WORD0,Error Injection Channel Descriptor 7. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD7_WORD1,Error Injection Channel Descriptor 7. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x300++0x7 line.long 0x0 "EICHD8_WORD0,Error Injection Channel Descriptor 8. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD8_WORD1,Error Injection Channel Descriptor 8. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x340++0x7 line.long 0x0 "EICHD9_WORD0,Error Injection Channel Descriptor 9. Word0" hexmask.long.byte 0x0 25.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD9_WORD1,Error Injection Channel Descriptor 9. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x384++0x3 line.long 0x0 "EICHD10_WORD1,Error Injection Channel Descriptor 10. Word1" bitfld.long 0x0 0.--1. "B0_3DATA_MASK,Data Mask Bytes 0-3" "0,1,2,3" group.long 0x3C4++0x3 line.long 0x0 "EICHD11_WORD1,Error Injection Channel Descriptor 11. Word1" hexmask.long.byte 0x0 0.--4. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x404++0x3 line.long 0x0 "EICHD12_WORD1,Error Injection Channel Descriptor 12. Word1" hexmask.long.byte 0x0 0.--6. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" tree.end tree "AON_FCCU" base ad:0x44570000 group.long 0x300++0x3 line.long 0x0 "GRKNTIMC0,Global Reaction Timer Period" hexmask.long 0x0 0.--31. 1. "RKTIMCFG,Reaction Timer Period" group.long 0x440++0xB line.long 0x0 "GFLTRC_C0,Global Fault Recovery" bitfld.long 0x0 31. "RHWSW31,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 30. "RHWSW30,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 29. "RHWSW29,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 28. "RHWSW28,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 27. "RHWSW27,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 26. "RHWSW26,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 25. "RHWSW25,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 24. "RHWSW24,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 23. "RHWSW23,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 22. "RHWSW22,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 21. "RHWSW21,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 20. "RHWSW20,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 19. "RHWSW19,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 18. "RHWSW18,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 17. "RHWSW17,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 16. "RHWSW16,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 15. "RHWSW15,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 14. "RHWSW14,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 13. "RHWSW13,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 12. "RHWSW12,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 11. "RHWSW11,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 10. "RHWSW10,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 9. "RHWSW9,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 8. "RHWSW8,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 7. "RHWSW7,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 6. "RHWSW6,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 5. "RHWSW5,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 4. "RHWSW4,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 3. "RHWSW3,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 2. "RHWSW2,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x0 1. "RHWSW1,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x0 0. "RHWSW0,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" line.long 0x4 "GFLTRC_C1,Global Fault Recovery" bitfld.long 0x4 31. "RHWSW63,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 30. "RHWSW62,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 29. "RHWSW61,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 28. "RHWSW60,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 27. "RHWSW59,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 26. "RHWSW58,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 25. "RHWSW57,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 24. "RHWSW56,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 23. "RHWSW55,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 22. "RHWSW54,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 21. "RHWSW53,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 20. "RHWSW52,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 19. "RHWSW51,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 18. "RHWSW50,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 17. "RHWSW49,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 16. "RHWSW48,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 15. "RHWSW47,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 14. "RHWSW46,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 13. "RHWSW45,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 12. "RHWSW44,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 11. "RHWSW43,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 10. "RHWSW42,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 9. "RHWSW41,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 8. "RHWSW40,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 7. "RHWSW39,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 6. "RHWSW38,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 5. "RHWSW37,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 4. "RHWSW36,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 3. "RHWSW35,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 2. "RHWSW34,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x4 1. "RHWSW33,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x4 0. "RHWSW32,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" line.long 0x8 "GFLTRC_C2,Global Fault Recovery" bitfld.long 0x8 15. "RHWSW79,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 14. "RHWSW78,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 13. "RHWSW77,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 12. "RHWSW76,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 11. "RHWSW75,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 10. "RHWSW74,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 9. "RHWSW73,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 8. "RHWSW72,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 7. "RHWSW71,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 6. "RHWSW70,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 5. "RHWSW69,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 4. "RHWSW68,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 3. "RHWSW67,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 2. "RHWSW66,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" newline bitfld.long 0x8 1. "RHWSW65,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" bitfld.long 0x8 0. "RHWSW64,Recovery/Clearing Mechanism Hardware Or Software" "0: Hardware clearable,1: Software clearable" group.long 0xC80++0xB line.long 0x0 "GFLTOVDC0,Global Fault Overflow Detection" bitfld.long 0x0 31. "OVF_DIS31,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 30. "OVF_DIS30,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 29. "OVF_DIS29,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 28. "OVF_DIS28,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 27. "OVF_DIS27,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 26. "OVF_DIS26,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 25. "OVF_DIS25,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 24. "OVF_DIS24,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 23. "OVF_DIS23,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 22. "OVF_DIS22,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 21. "OVF_DIS21,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 20. "OVF_DIS20,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 19. "OVF_DIS19,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 18. "OVF_DIS18,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 17. "OVF_DIS17,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 16. "OVF_DIS16,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 15. "OVF_DIS15,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 14. "OVF_DIS14,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 13. "OVF_DIS13,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 12. "OVF_DIS12,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 11. "OVF_DIS11,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 10. "OVF_DIS10,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 9. "OVF_DIS9,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 8. "OVF_DIS8,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 7. "OVF_DIS7,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 6. "OVF_DIS6,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 5. "OVF_DIS5,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 4. "OVF_DIS4,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 3. "OVF_DIS3,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 2. "OVF_DIS2,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x0 1. "OVF_DIS1,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x0 0. "OVF_DIS0,Fault Overflow Detection Disable" "0: Enables,1: Disables" line.long 0x4 "GFLTOVDC1,Global Fault Overflow Detection" bitfld.long 0x4 31. "OVF_DIS63,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 30. "OVF_DIS62,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 29. "OVF_DIS61,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 28. "OVF_DIS60,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 27. "OVF_DIS59,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 26. "OVF_DIS58,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 25. "OVF_DIS57,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 24. "OVF_DIS56,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 23. "OVF_DIS55,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 22. "OVF_DIS54,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 21. "OVF_DIS53,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 20. "OVF_DIS52,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 19. "OVF_DIS51,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 18. "OVF_DIS50,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 17. "OVF_DIS49,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 16. "OVF_DIS48,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 15. "OVF_DIS47,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 14. "OVF_DIS46,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 13. "OVF_DIS45,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 12. "OVF_DIS44,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 11. "OVF_DIS43,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 10. "OVF_DIS42,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 9. "OVF_DIS41,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 8. "OVF_DIS40,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 7. "OVF_DIS39,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 6. "OVF_DIS38,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 5. "OVF_DIS37,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 4. "OVF_DIS36,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 3. "OVF_DIS35,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 2. "OVF_DIS34,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 1. "OVF_DIS33,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x4 0. "OVF_DIS32,Fault Overflow Detection Disable" "0: Enables,1: Disables" line.long 0x8 "GFLTOVDC2,Global Fault Overflow Detection" bitfld.long 0x8 15. "OVF_DIS79,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 14. "OVF_DIS78,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 13. "OVF_DIS77,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 12. "OVF_DIS76,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 11. "OVF_DIS75,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 10. "OVF_DIS74,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 9. "OVF_DIS73,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 8. "OVF_DIS72,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 7. "OVF_DIS71,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 6. "OVF_DIS70,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 5. "OVF_DIS69,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 4. "OVF_DIS68,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 3. "OVF_DIS67,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 2. "OVF_DIS66,Fault Overflow Detection Disable" "0: Enables,1: Disables" newline bitfld.long 0x8 1. "OVF_DIS65,Fault Overflow Detection Disable" "0: Enables,1: Disables" bitfld.long 0x8 0. "OVF_DIS64,Fault Overflow Detection Disable" "0: Enables,1: Disables" rgroup.long 0xD00++0x3 line.long 0x0 "GRKNTIMS,Global Reaction Timer Status" hexmask.long 0x0 0.--31. 1. "RKTIMVAL,Current Reaction Timer" group.long 0xD04++0x7 line.long 0x0 "GCTRL,Global Space Control" bitfld.long 0x0 0. "OVF_EN,Overflow Enable" "0: Disables,1: Enables" line.long 0x4 "GINTOVFS,Global DID FSM Status" hexmask.long.byte 0x4 24.--27. 1. "OVF_DID,Overflow DID" hexmask.long.byte 0x4 16.--19. 1. "SERV_DID,Domain Being Serviced" newline eventfld.long 0x4 8. "OVF_DET,Overflow Detect" "0: Not detected,1: Detected" rbitfld.long 0x4 7. "FLTSERV,Fault Serve" "0: No fault asserted,1: At least one fault asserted" newline rbitfld.long 0x4 0.--1. "FSMSTATE,FSM State" "0: Idle,1: Immediate reaction,2: Delayed reaction,3: Global reaction" group.long 0xD10++0x3 line.long 0x0 "GOVFRKC0,Global Overflow Reaction" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0xD20++0x7 line.long 0x0 "GMEOUTDC,Global Minimum EOUT Duration" hexmask.long 0x0 0.--31. 1. "EOUTMIND,EOUT Minimum Duration" line.long 0x4 "GEOUTTCT,Global EOUT Timer Disable" bitfld.long 0x4 1. "TMRDIS1,Timer Disable" "0: Enables,1: Disables" bitfld.long 0x4 0. "TMRDIS0,Timer Disable" "0: Enables,1: Disables" group.long 0xD30++0xB line.long 0x0 "GEOUTPNC0,Global EOUT Pin" bitfld.long 0x0 31. "SOC_PAD_CTRL16,SoC Pad Control" "0,1" bitfld.long 0x0 30. "SOC_PAD_CTRL15,SoC Pad Control" "0,1" newline bitfld.long 0x0 29. "SOC_PAD_CTRL14,SoC Pad Control" "0,1" bitfld.long 0x0 28. "SOC_PAD_CTRL13,SoC Pad Control" "0,1" newline bitfld.long 0x0 27. "SOC_PAD_CTRL12,SoC Pad Control" "0,1" bitfld.long 0x0 26. "SOC_PAD_CTRL11,SoC Pad Control" "0,1" newline bitfld.long 0x0 25. "SOC_PAD_CTRL10,SoC Pad Control" "0,1" bitfld.long 0x0 24. "SOC_PAD_CTRL9,SoC Pad Control" "0,1" newline bitfld.long 0x0 23. "SOC_PAD_CTRL8,SoC Pad Control" "0,1" bitfld.long 0x0 22. "SOC_PAD_CTRL7,SoC Pad Control" "0,1" newline bitfld.long 0x0 21. "SOC_PAD_CTRL6,SoC Pad Control" "0,1" bitfld.long 0x0 20. "SOC_PAD_CTRL5,SoC Pad Control" "0,1" newline bitfld.long 0x0 19. "SOC_PAD_CTRL4,SoC Pad Control" "0,1" bitfld.long 0x0 18. "SOC_PAD_CTRL3,SoC Pad Control" "0,1" newline bitfld.long 0x0 17. "SOC_PAD_CTRL2,SoC Pad Control" "0,1" bitfld.long 0x0 16. "SOC_PAD_CTRL1,SoC Pad Control" "0,1" newline bitfld.long 0x0 10. "INV_IP,Invert Input" "0: No inversion,1: Inverted" rbitfld.long 0x0 9. "IND_STAT,Input Data From Pad" "0: 0,1: 1" newline bitfld.long 0x0 8. "IBE,Input Buffer Enable" "0: Disables,1: Enables" bitfld.long 0x0 4.--5. "VAL_CTRL,Invert Output" "0: FSM,1: Always low,2: FSM,3: Idle: high; Reaction: controlled by FSM and mode." newline rbitfld.long 0x0 3. "DO_STAT,Data Output Status" "0: Low,1: High" rbitfld.long 0x0 1. "OBE_STAT,Output Buffer Enable Status" "0: Disabled,1: Enabled" newline bitfld.long 0x0 0. "OBE_VALID,Output Buffer Enable Valid" "0: Invalid (can be overridden),1: Valid (cannot be overridden)" line.long 0x4 "GEOUTPMC0,Global EOUT Pin Map" bitfld.long 0x4 3. "SPLENB3,Special Enable Pins" "0,1" bitfld.long 0x4 2. "SPLENB2,Special Enable Pins" "0,1" newline bitfld.long 0x4 1. "SPLENB1,Special Enable Pins" "0,1" bitfld.long 0x4 0. "SPLENB0,Special Enable Pins" "0,1" line.long 0x8 "GEOUTMC0,Global EOUT Mode" bitfld.long 0x8 3. "INV,Invert EOUT" "0: Not inverted,1: Inverted" bitfld.long 0x8 0.--2. "EOUTM,EOUT Pin Mode" "0: Input only (Hi-Z default and safe-state),1: Push-pull (drive 1 for fault 0 for normal),2: Open-drain (drive 0 for fault Hi-Z for normal),3: Open-collector (drive 1 for fault Hi-Z for normal),4: Bi-stable,5: Fault-toggle,?,?" rgroup.long 0xD3C++0x3 line.long 0x0 "GEOUTTMS0,Global EOUT Timer" hexmask.long 0x0 0.--31. 1. "EOUTDVAL,EOUT Timer Current Value" group.long 0xD40++0xF line.long 0x0 "GEOUTDIC0,Global EOUT DID" hexmask.long.byte 0x0 0.--3. 1. "DID_EOUT,DID for Fault on EOUT" line.long 0x4 "GEOUTPNC1,Global EOUT Pin" bitfld.long 0x4 31. "SOC_PAD_CTRL16,SoC Pad Control" "0,1" bitfld.long 0x4 30. "SOC_PAD_CTRL15,SoC Pad Control" "0,1" newline bitfld.long 0x4 29. "SOC_PAD_CTRL14,SoC Pad Control" "0,1" bitfld.long 0x4 28. "SOC_PAD_CTRL13,SoC Pad Control" "0,1" newline bitfld.long 0x4 27. "SOC_PAD_CTRL12,SoC Pad Control" "0,1" bitfld.long 0x4 26. "SOC_PAD_CTRL11,SoC Pad Control" "0,1" newline bitfld.long 0x4 25. "SOC_PAD_CTRL10,SoC Pad Control" "0,1" bitfld.long 0x4 24. "SOC_PAD_CTRL9,SoC Pad Control" "0,1" newline bitfld.long 0x4 23. "SOC_PAD_CTRL8,SoC Pad Control" "0,1" bitfld.long 0x4 22. "SOC_PAD_CTRL7,SoC Pad Control" "0,1" newline bitfld.long 0x4 21. "SOC_PAD_CTRL6,SoC Pad Control" "0,1" bitfld.long 0x4 20. "SOC_PAD_CTRL5,SoC Pad Control" "0,1" newline bitfld.long 0x4 19. "SOC_PAD_CTRL4,SoC Pad Control" "0,1" bitfld.long 0x4 18. "SOC_PAD_CTRL3,SoC Pad Control" "0,1" newline bitfld.long 0x4 17. "SOC_PAD_CTRL2,SoC Pad Control" "0,1" bitfld.long 0x4 16. "SOC_PAD_CTRL1,SoC Pad Control" "0,1" newline bitfld.long 0x4 10. "INV_IP,Invert Input" "0: No inversion,1: Inverted" rbitfld.long 0x4 9. "IND_STAT,Input Data From Pad" "0: 0,1: 1" newline bitfld.long 0x4 8. "IBE,Input Buffer Enable" "0: Disables,1: Enables" bitfld.long 0x4 4.--5. "VAL_CTRL,Invert Output" "0: FSM,1: Always low,2: FSM,3: Idle: high; Reaction: controlled by FSM and mode." newline rbitfld.long 0x4 3. "DO_STAT,Data Output Status" "0: Low,1: High" rbitfld.long 0x4 1. "OBE_STAT,Output Buffer Enable Status" "0: Disabled,1: Enabled" newline bitfld.long 0x4 0. "OBE_VALID,Output Buffer Enable Valid" "0: Invalid (can be overridden),1: Valid (cannot be overridden)" line.long 0x8 "GEOUTPMC1,Global EOUT Pin Map" bitfld.long 0x8 3. "SPLENB3,Special Enable Pins" "0,1" bitfld.long 0x8 2. "SPLENB2,Special Enable Pins" "0,1" newline bitfld.long 0x8 1. "SPLENB1,Special Enable Pins" "0,1" bitfld.long 0x8 0. "SPLENB0,Special Enable Pins" "0,1" line.long 0xC "GEOUTMC1,Global EOUT Mode" bitfld.long 0xC 3. "INV,Invert EOUT" "0: Not inverted,1: Inverted" bitfld.long 0xC 0.--2. "EOUTM,EOUT Pin Mode" "0: Input only (Hi-Z default and safe-state),1: Push-pull (drive 1 for fault 0 for normal),2: Open-drain (drive 0 for fault Hi-Z for normal),3: Open-collector (drive 1 for fault Hi-Z for normal),4: Bi-stable,5: Fault-toggle,?,?" rgroup.long 0xD50++0x3 line.long 0x0 "GEOUTTMS1,Global EOUT Timer" hexmask.long 0x0 0.--31. 1. "EOUTDVAL,EOUT Timer Current Value" group.long 0xD54++0x3 line.long 0x0 "GEOUTDIC1,Global EOUT DID" hexmask.long.byte 0x0 0.--3. 1. "DID_EOUT,DID for Fault on EOUT" group.long 0xFB0++0x3 line.long 0x0 "GDBGCFG,Global Debug" bitfld.long 0x0 16. "FRZ,Freeze On First Fault" "0: Disables,1: Enables" rgroup.long 0xFB4++0xB line.long 0x0 "GDBGSTAT,Global Debug Status" bitfld.long 0x0 31. "RKN_REQ,Accumulative reaction request" "0,1" bitfld.long 0x0 30. "RKN_ACK,Accumulative reaction acknowledgement" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "FLTIND,Fault Index" line.long 0x4 "GDPFSTAT,Global Debug Pending Fault Status" bitfld.long 0x4 1. "PENDFLT1,Pending Fault Status for corresponding EOUT pin" "0,1" bitfld.long 0x4 0. "PENDFLT0,Pending Fault Status for corresponding EOUT pin" "0,1" line.long 0x8 "GDALTRLD,Global Debug Alternate Reload Status" bitfld.long 0x8 1. "ALTRLD1,Alternate timer reload status for corresponding EOUT pin" "0,1" bitfld.long 0x8 0. "ALTRLD0,Alternate timer reload status for corresponding EOUT pin" "0,1" group.long 0x10000++0x3 line.long 0x0 "FHCFG0,Fault Handler" bitfld.long 0x0 0. "FHIDEN,Fault Handler Enable" "0: Disables,1: Enables" rgroup.long 0x10004++0x3 line.long 0x0 "FHSRVDS0,Fault Handler Status" bitfld.long 0x0 8. "AGGFLTS,Aggregated Fault Status" "0: No faults,1: At least one fault" hexmask.long.byte 0x0 0.--3. 1. "SERV_DID,DID Being Serviced" group.long 0x10010++0xB line.long 0x0 "FHFLTENC0_0,Fault Enable" bitfld.long 0x0 31. "EN31,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 30. "EN30,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 29. "EN29,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 28. "EN28,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 27. "EN27,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 26. "EN26,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 25. "EN25,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 24. "EN24,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 23. "EN23,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 22. "EN22,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 21. "EN21,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 20. "EN20,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 19. "EN19,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 18. "EN18,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 17. "EN17,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 16. "EN16,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 15. "EN15,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 14. "EN14,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 13. "EN13,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 12. "EN12,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 11. "EN11,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 10. "EN10,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 9. "EN9,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 8. "EN8,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 7. "EN7,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 6. "EN6,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 5. "EN5,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 4. "EN4,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 3. "EN3,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 2. "EN2,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 1. "EN1,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x0 0. "EN0,Fault Enable" "0: Disables,1: Enables" line.long 0x4 "FHFLTENC0_1,Fault Enable" bitfld.long 0x4 31. "EN63,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 30. "EN62,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 29. "EN61,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 28. "EN60,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 27. "EN59,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 26. "EN58,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 25. "EN57,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 24. "EN56,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 23. "EN55,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 22. "EN54,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 21. "EN53,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 20. "EN52,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 19. "EN51,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 18. "EN50,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 17. "EN49,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 16. "EN48,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 15. "EN47,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 14. "EN46,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 13. "EN45,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 12. "EN44,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 11. "EN43,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 10. "EN42,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 9. "EN41,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 8. "EN40,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 7. "EN39,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 6. "EN38,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 5. "EN37,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 4. "EN36,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 3. "EN35,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 2. "EN34,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 1. "EN33,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x4 0. "EN32,Fault Enable" "0: Disables,1: Enables" line.long 0x8 "FHFLTENC0_2,Fault Enable" bitfld.long 0x8 15. "EN79,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 14. "EN78,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 13. "EN77,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 12. "EN76,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 11. "EN75,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 10. "EN74,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 9. "EN73,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 8. "EN72,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 7. "EN71,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 6. "EN70,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 5. "EN69,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 4. "EN68,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 3. "EN67,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 2. "EN66,Fault Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 1. "EN65,Fault Enable" "0: Disables,1: Enables" bitfld.long 0x8 0. "EN64,Fault Enable" "0: Disables,1: Enables" group.long 0x10050++0xB line.long 0x0 "FHFLTS0_0,Fault Status" eventfld.long 0x0 31. "STAT31,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 30. "STAT30,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 29. "STAT29,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 28. "STAT28,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 27. "STAT27,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 26. "STAT26,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 25. "STAT25,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 24. "STAT24,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 23. "STAT23,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 22. "STAT22,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 21. "STAT21,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 20. "STAT20,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 19. "STAT19,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 18. "STAT18,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 17. "STAT17,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 16. "STAT16,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 15. "STAT15,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 14. "STAT14,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 13. "STAT13,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 12. "STAT12,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 11. "STAT11,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 10. "STAT10,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 9. "STAT9,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 8. "STAT8,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 7. "STAT7,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 6. "STAT6,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 5. "STAT5,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 4. "STAT4,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 3. "STAT3,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 2. "STAT2,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x0 1. "STAT1,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x0 0. "STAT0,Fault Status" "0: Not latched,1: Latched" line.long 0x4 "FHFLTS0_1,Fault Status" eventfld.long 0x4 31. "STAT63,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 30. "STAT62,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 29. "STAT61,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 28. "STAT60,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 27. "STAT59,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 26. "STAT58,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 25. "STAT57,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 24. "STAT56,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 23. "STAT55,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 22. "STAT54,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 21. "STAT53,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 20. "STAT52,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 19. "STAT51,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 18. "STAT50,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 17. "STAT49,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 16. "STAT48,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 15. "STAT47,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 14. "STAT46,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 13. "STAT45,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 12. "STAT44,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 11. "STAT43,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 10. "STAT42,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 9. "STAT41,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 8. "STAT40,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 7. "STAT39,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 6. "STAT38,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 5. "STAT37,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 4. "STAT36,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 3. "STAT35,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 2. "STAT34,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x4 1. "STAT33,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x4 0. "STAT32,Fault Status" "0: Not latched,1: Latched" line.long 0x8 "FHFLTS0_2,Fault Status" eventfld.long 0x8 15. "STAT79,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 14. "STAT78,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 13. "STAT77,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 12. "STAT76,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 11. "STAT75,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 10. "STAT74,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 9. "STAT73,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 8. "STAT72,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 7. "STAT71,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 6. "STAT70,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 5. "STAT69,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 4. "STAT68,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 3. "STAT67,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 2. "STAT66,Fault Status" "0: Not latched,1: Latched" newline eventfld.long 0x8 1. "STAT65,Fault Status" "0: Not latched,1: Latched" eventfld.long 0x8 0. "STAT64,Fault Status" "0: Not latched,1: Latched" group.long 0x10090++0x4F line.long 0x0 "FHFLTRKC0_0,Fault Reaction Set Configuration" bitfld.long 0x0 24.--26. "RKNSEL3,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "RKNSEL2,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 8.--10. "RKNSEL1,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "RKNSEL0,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x4 "FHFLTRKC0_1,Fault Reaction Set Configuration" bitfld.long 0x4 24.--26. "RKNSEL7,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "RKNSEL6,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 8.--10. "RKNSEL5,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "RKNSEL4,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x8 "FHFLTRKC0_2,Fault Reaction Set Configuration" bitfld.long 0x8 24.--26. "RKNSEL11,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "RKNSEL10,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "RKNSEL9,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x8 0.--2. "RKNSEL8,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0xC "FHFLTRKC0_3,Fault Reaction Set Configuration" bitfld.long 0xC 24.--26. "RKNSEL15,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "RKNSEL14,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 8.--10. "RKNSEL13,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0xC 0.--2. "RKNSEL12,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x10 "FHFLTRKC0_4,Fault Reaction Set Configuration" bitfld.long 0x10 24.--26. "RKNSEL19,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x10 16.--18. "RKNSEL18,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 8.--10. "RKNSEL17,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x10 0.--2. "RKNSEL16,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x14 "FHFLTRKC0_5,Fault Reaction Set Configuration" bitfld.long 0x14 24.--26. "RKNSEL23,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x14 16.--18. "RKNSEL22,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 8.--10. "RKNSEL21,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x14 0.--2. "RKNSEL20,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x18 "FHFLTRKC0_6,Fault Reaction Set Configuration" bitfld.long 0x18 24.--26. "RKNSEL27,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x18 16.--18. "RKNSEL26,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x18 8.--10. "RKNSEL25,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x18 0.--2. "RKNSEL24,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x1C "FHFLTRKC0_7,Fault Reaction Set Configuration" bitfld.long 0x1C 24.--26. "RKNSEL31,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x1C 16.--18. "RKNSEL30,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 8.--10. "RKNSEL29,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x1C 0.--2. "RKNSEL28,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x20 "FHFLTRKC0_8,Fault Reaction Set Configuration" bitfld.long 0x20 24.--26. "RKNSEL35,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x20 16.--18. "RKNSEL34,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x20 8.--10. "RKNSEL33,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x20 0.--2. "RKNSEL32,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x24 "FHFLTRKC0_9,Fault Reaction Set Configuration" bitfld.long 0x24 24.--26. "RKNSEL39,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x24 16.--18. "RKNSEL38,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x24 8.--10. "RKNSEL37,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x24 0.--2. "RKNSEL36,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x28 "FHFLTRKC0_10,Fault Reaction Set Configuration" bitfld.long 0x28 24.--26. "RKNSEL43,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x28 16.--18. "RKNSEL42,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x28 8.--10. "RKNSEL41,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x28 0.--2. "RKNSEL40,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x2C "FHFLTRKC0_11,Fault Reaction Set Configuration" bitfld.long 0x2C 24.--26. "RKNSEL47,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x2C 16.--18. "RKNSEL46,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x2C 8.--10. "RKNSEL45,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x2C 0.--2. "RKNSEL44,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x30 "FHFLTRKC0_12,Fault Reaction Set Configuration" bitfld.long 0x30 24.--26. "RKNSEL51,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x30 16.--18. "RKNSEL50,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x30 8.--10. "RKNSEL49,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x30 0.--2. "RKNSEL48,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x34 "FHFLTRKC0_13,Fault Reaction Set Configuration" bitfld.long 0x34 24.--26. "RKNSEL55,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x34 16.--18. "RKNSEL54,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x34 8.--10. "RKNSEL53,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x34 0.--2. "RKNSEL52,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x38 "FHFLTRKC0_14,Fault Reaction Set Configuration" bitfld.long 0x38 24.--26. "RKNSEL59,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x38 16.--18. "RKNSEL58,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x38 8.--10. "RKNSEL57,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x38 0.--2. "RKNSEL56,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x3C "FHFLTRKC0_15,Fault Reaction Set Configuration" bitfld.long 0x3C 24.--26. "RKNSEL63,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x3C 16.--18. "RKNSEL62,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x3C 8.--10. "RKNSEL61,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x3C 0.--2. "RKNSEL60,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x40 "FHFLTRKC0_16,Fault Reaction Set Configuration" bitfld.long 0x40 24.--26. "RKNSEL67,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x40 16.--18. "RKNSEL66,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x40 8.--10. "RKNSEL65,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x40 0.--2. "RKNSEL64,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x44 "FHFLTRKC0_17,Fault Reaction Set Configuration" bitfld.long 0x44 24.--26. "RKNSEL71,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x44 16.--18. "RKNSEL70,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x44 8.--10. "RKNSEL69,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x44 0.--2. "RKNSEL68,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x48 "FHFLTRKC0_18,Fault Reaction Set Configuration" bitfld.long 0x48 24.--26. "RKNSEL75,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x48 16.--18. "RKNSEL74,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x48 8.--10. "RKNSEL73,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x48 0.--2. "RKNSEL72,Reaction Selection" "0,1,2,3,4,5,6,7" line.long 0x4C "FHFLTRKC0_19,Fault Reaction Set Configuration" bitfld.long 0x4C 24.--26. "RKNSEL79,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4C 16.--18. "RKNSEL78,Reaction Selection" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4C 8.--10. "RKNSEL77,Reaction Selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4C 0.--2. "RKNSEL76,Reaction Selection" "0,1,2,3,4,5,6,7" group.long 0x10290++0x3 line.long 0x0 "FHIMRKC0_00,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x102A0++0x3 line.long 0x0 "FHDLRKC0_00,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x102B0++0x3 line.long 0x0 "FHIMRKC0_10,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x102C0++0x3 line.long 0x0 "FHDLRKC0_10,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x102D0++0x3 line.long 0x0 "FHIMRKC0_20,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x102E0++0x3 line.long 0x0 "FHDLRKC0_20,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x102F0++0x3 line.long 0x0 "FHIMRKC0_30,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10300++0x3 line.long 0x0 "FHDLRKC0_30,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10310++0x3 line.long 0x0 "FHIMRKC0_40,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10320++0x3 line.long 0x0 "FHDLRKC0_40,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10330++0x3 line.long 0x0 "FHIMRKC0_50,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10340++0x3 line.long 0x0 "FHDLRKC0_50,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10350++0x3 line.long 0x0 "FHIMRKC0_60,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10360++0x3 line.long 0x0 "FHDLRKC0_60,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10370++0x3 line.long 0x0 "FHIMRKC0_70,Immediate Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" group.long 0x10380++0x3 line.long 0x0 "FHDLRKC0_70,Delayed Reaction Configuration" bitfld.long 0x0 8. "RKNEN6,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 7. "RKNEN5,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "RKNEN4,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 5. "RKNEN3,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 4. "RKNEN2,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 3. "RKNEN1,Reaction Line Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "RKNEN0,Reaction Line Enable" "0: Disables,1: Enables" bitfld.long 0x0 1. "EOUTEN1,EOUT Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "EOUTEN0,EOUT Enable" "0: Disables,1: Enables" tree.end tree "AON_I3C" base ad:0x44330000 group.long 0x0++0x17 line.long 0x0 "MCONFIG,Controller Configuration" hexmask.long.byte 0x0 28.--31. 1. "I2CBAUD,I2C Baud Rate" bitfld.long 0x0 25.--27. "SKEW,Skew" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24. "ODHPP,Open Drain High Push-Pull" "0: ODHPP disabled. Open-Drain SCL High half-clock..,1: ODHPP enabled. Open-Drain High SCL half-lock.." hexmask.long.byte 0x0 16.--23. 1. "ODBAUD,Open Drain Baud Rate" newline hexmask.long.byte 0x0 12.--15. 1. "PPLOW,Push-Pull Low" hexmask.long.byte 0x0 8.--11. 1. "PPBAUD,Push-Pull Baud Rate" newline bitfld.long 0x0 6. "ODSTOP,Open Drain Stop" "0: Disable open-drain stop. ODSTOP must be disabled..,1: Enable open-drain stop. STOP is emitted at.." bitfld.long 0x0 4.--5. "HKEEP,High-Keeper" "0: NONE,1: WIRED_IN,2: PASSIVE_SDA,3: PASSIVE_ON_SDA_SCL" newline bitfld.long 0x0 3. "DISTO,Disable Timeout" "0: Timeout enabled,1: Timeout disabled if timeout is configured" bitfld.long 0x0 0.--1. "MSTENA,Controller Enable" "0: CONTROLLER_OFF,1: CONTROLLER_ON,2: CONTROLLER_CAPABLE,?" line.long 0x4 "SCONFIG,Target Configuration" hexmask.long.byte 0x4 25.--31. 1. "SADDR,Static Address" hexmask.long.byte 0x4 16.--21. 1. "BAMATCH,Bus Available Match" newline bitfld.long 0x4 9. "OFFLINE,Offline" "0: Disable,1: Enables wait to ensure the bus is not in HDR mode." bitfld.long 0x4 4. "HDROK,HDR OK" "0: Disable HDR OK.,1: Enable HDR OK. Allow HDR-DDR and/or HDR-BT.." newline bitfld.long 0x4 3. "S0IGNORE,Ignore TE0/TE1 Errors" "0: Do not ignore TE0/TE1 errors,1: Ignore TE0/TE1 errors. Target does not detect.." bitfld.long 0x4 2. "MATCHSS,Match START or STOP" "0: Match START or STOP disable,1: Match START or STOP enable. START and STOP.." newline bitfld.long 0x4 1. "NACK,Not Acknowledge" "0: Always NACK disable,1: Always NACK enable. The target rejects all.." bitfld.long 0x4 0. "SLVENA,Target Enable" "0: Target ignores the I2C or I3C bus,1: Target can operate on the I2C or I3C bus" line.long 0x8 "SSTATUS,Target Status" rbitfld.long 0x8 30.--31. "TIMECTRL,Time Control" "0: NO_TIME_CONTROL,1: SYNC_MODE,2: ASYNC_MODE,3: BOTHSYNCASYNC" rbitfld.long 0x8 28.--29. "ACTSTATE,Activity State from Common Command Codes (CCC)" "0: NO_LATENCY,1: LATENCY_1MS,2: LATENCY_100MS,3: LATENCY_10S" newline rbitfld.long 0x8 27. "HJDIS,Hot-Join Disabled" "0: Hot-Join not disabled,1: Hot-Join disabled" rbitfld.long 0x8 25. "MRDIS,Controller Requests Are Disabled" "0: Controller Requests not disabled,1: Controller Requests disabled" newline rbitfld.long 0x8 24. "IBIDIS,In-Band Interrupts Are Disabled" "0: In-Band Interrupts not disabled,1: In-Band Interrupts disabled" rbitfld.long 0x8 20.--21. "EVDET,Event Details" "0: NONE,1: NO_REQUEST,2: NACKED,3: ACKED" newline eventfld.long 0x8 19. "SLVRST,Target Reset" "0,1" eventfld.long 0x8 18. "EVENT,Event" "0: No event has occurred.,1: An IBI CR or HJ has occurred." newline eventfld.long 0x8 17. "CHANDLED,Common Command Code Handled" "0: CCC handling not in progress.,1: CCC handling in progress." eventfld.long 0x8 16. "HDRMATCH,High Data Rate Command Match" "0: HDR command did not match.,1: HDR command matched the I3C Dynamic Address of.." newline rbitfld.long 0x8 15. "ERRWARN,Error Warning" "0,1" eventfld.long 0x8 14. "CCC,Common Command Code" "0: No CCC received.,1: CCC received." newline eventfld.long 0x8 13. "DACHG,Dynamic Address Change" "0: No DA change detected.,1: DA change detected. The target DA has been.." rbitfld.long 0x8 12. "TXNOTFULL,Transmit Buffer Is Not Full" "0: Transmit buffer full,1: Transmit buffer not full" newline rbitfld.long 0x8 11. "RX_PEND,Received Message Pending" "0: No received message is pending.,1: Received message is pending." eventfld.long 0x8 10. "STOP,Stop" "0: No STOP detected.,1: Stopped state detected. A STOP state was present.." newline eventfld.long 0x8 9. "MATCHED,Matched" "0: No header matched.,1: An incoming header matched the I3C Dynamic or.." eventfld.long 0x8 8. "START,Start" "0: No START seen.,1: A START or repeated START was seen after the.." newline rbitfld.long 0x8 6. "STHDR,Status High Data Rate" "0: I3C bus not in HDR-DDR mode,1: The I3C bus is in HDR-DDR mode regardless of.." rbitfld.long 0x8 5. "STDAA,Status Dynamic Address Assignment" "0: Not in ENTDAA mode.,1: I3C bus is in Enter Dynamic Address Assignment.." newline rbitfld.long 0x8 4. "STREQWR,Status Request Write" "0: REQ in process is not SDR write data from the..,1: REQ in process is SDR write data from the.." rbitfld.long 0x8 3. "STREQRD,Status Request Read" "0: REQ in process is not an SDR read from this..,1: The REQ in process is an SDR read from this.." newline rbitfld.long 0x8 2. "STCCCH,Status Common Command Code Handler" "0: No CCC message is being handled.,1: A CCC message is being handled automatically." rbitfld.long 0x8 1. "STMSG,Status message" "0: Bus target not listening or responding.,1: This bus target is listening to the bus traffic.." newline rbitfld.long 0x8 0. "STNOTSTOP,Status Not Stop" "0: I3C module is in a STOP condition.,1: The bus is busy (has activity)." line.long 0xC "SCTRL,Target Control" hexmask.long.byte 0xC 24.--31. 1. "VENDINFO,Vendor Information" bitfld.long 0xC 20.--21. "ACTSTATE,Activity State of Target" "0,1,2,3" newline hexmask.long.byte 0xC 16.--19. 1. "PENDINT,Pending Interrupt" hexmask.long.byte 0xC 8.--15. 1. "IBIDATA,In-Band Interrupt Data" newline bitfld.long 0xC 4. "MAPIDX,Map Index" "0,1" bitfld.long 0xC 3. "EXTDATA,Extended Data" "0: Extended data disabled.,1: Extended data enabled. After IBIDATA is emitted.." newline bitfld.long 0xC 0.--1. "EVENT,Event" "0: NORMAL_MODE,1: IBI,2: CONTROLLER_REQUEST,3: HOT_JOIN_REQUEST" line.long 0x10 "SINTSET,Target Interrupt Set" bitfld.long 0x10 19. "SLVRST,Target Reset" "0: Disable Target Reset interrupt,1: Enable Target Reset interrupt" bitfld.long 0x10 18. "EVENT,Event Interrupt Enable" "0: Disable Event interrupt,1: Enable Event interrupt" newline bitfld.long 0x10 17. "CHANDLED,Common Command Code (CCC) Interrupt Enable" "0: Disable CCC Handled interrupt,1: Enable CCC Handled interrupt" bitfld.long 0x10 16. "DDRMATCHED,Double Data Rate Interrupt Enable" "0: Disable DDR interrupt,1: Enable DDR interrupt" newline bitfld.long 0x10 15. "ERRWARN,Error or Warning Interrupt Enable" "0: Disable error or warning interrupt,1: Enable error or warning interrupt" bitfld.long 0x10 14. "CCC,CCC (that was not handled by I3C module) Interrupt Enable" "0: Disable CCC interrupt,1: Enable CCC interrupt" newline bitfld.long 0x10 13. "DACHG,Dynamic Address Change Interrupt Enable" "0: Disable DA Change interrupt,1: Enable DA Change interrupt" bitfld.long 0x10 12. "TXSEND,Transmit Interrupt Enable" "0: Disable Transmit interrupt,1: Enable Transmit interrupt" newline bitfld.long 0x10 11. "RXPEND,Receive Interrupt Enable" "0: Disable Receive interrupt,1: Enable Receive interrupt" bitfld.long 0x10 10. "STOP,Stop Interrupt Enable" "0: Disable STOP interrupt,1: Enable STOP interrupt" newline bitfld.long 0x10 9. "MATCHED,Match interrupt enable" "0: Disable match interrupt,1: Enable match interrupt" bitfld.long 0x10 8. "START,Start Interrupt Enable" "0: Disable START interrupt,1: Enable START interrupt" line.long 0x14 "SINTCLR,Target Interrupt Clear" eventfld.long 0x14 19. "SLVRST,Target Reset" "0,1" eventfld.long 0x14 18. "EVENT,EVENT Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 17. "CHANDLED,CHANDLED Interrupt Enable Clear" "0,1" eventfld.long 0x14 16. "DDRMATCHED,DDRMATCHED Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 15. "ERRWARN,ERRWARN Interrupt Enable Clear" "0,1" eventfld.long 0x14 14. "CCC,CCC Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 13. "DACHG,DACHG Interrupt Enable Clear" "0,1" eventfld.long 0x14 12. "TXSEND,TXSEND Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 11. "RXPEND,RXPEND Interrupt Enable Clear" "0,1" eventfld.long 0x14 10. "STOP,STOP Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 9. "MATCHED,MATCHED Interrupt Enable Clear" "0,1" eventfld.long 0x14 8. "START,START Interrupt Enable Clear" "0,1" rgroup.long 0x18++0x3 line.long 0x0 "SINTMASKED,Target Interrupt Mask" bitfld.long 0x0 18. "EVENT,EVENT Interrupt Mask" "0,1" bitfld.long 0x0 17. "CHANDLED,CHANDLED Interrupt Mask" "0,1" newline bitfld.long 0x0 16. "DDRMATCHED,DDRMATCHED Interrupt Mask" "0,1" bitfld.long 0x0 15. "ERRWARN,ERRWARN Interrupt Mask" "0,1" newline bitfld.long 0x0 14. "CCC,CCC Interrupt Mask" "0,1" bitfld.long 0x0 13. "DACHG,DACHG Interrupt Mask" "0,1" newline bitfld.long 0x0 12. "TXSEND,TXSEND Interrupt Mask" "0,1" bitfld.long 0x0 11. "RXPEND,RXPEND Interrupt Mask" "0,1" newline bitfld.long 0x0 10. "STOP,STOP Interrupt Mask" "0,1" bitfld.long 0x0 9. "MATCHED,MATCHED Interrupt Mask" "0,1" newline bitfld.long 0x0 8. "START,START interrupt mask" "0,1" group.long 0x1C++0x7 line.long 0x0 "SERRWARN,Target Errors and Warnings" eventfld.long 0x0 17. "OWRITE,Over-write Error" "0: No Overwrite error,1: Overwrite error" eventfld.long 0x0 16. "OREAD,Over-read Error" "0: No Over-read error,1: Over-read error" newline eventfld.long 0x0 11. "S0S1,TE0 or TE1 Error" "0: No TE0 or TE1 error,1: TE0 or TE1 error" eventfld.long 0x0 10. "HCRC,HDR-DDR CRC Error" "0: No HDR-DDR CRC error,1: HDR-DDR CRC error" newline eventfld.long 0x0 9. "HPAR,HDR Parity Error" "0: No HDR Parity error,1: HDR Parity error" eventfld.long 0x0 8. "SPAR,SDR Parity Error" "0: No SDR Parity error,1: SDR Parity error" newline eventfld.long 0x0 4. "INVSTART,Invalid Start Error" "0: No invalid start error,1: Invalid start error" eventfld.long 0x0 3. "TERM,Terminated Error" "0: No terminated error,1: Terminated error" newline eventfld.long 0x0 2. "URUNNACK,Underrun and Not Acknowledged (NACKED) Error" "0: No underrun and not acknowledged error,1: Underrun and not acknowledged error" eventfld.long 0x0 1. "URUN,Underrun Error" "0: No underrun error,1: Underrun error" newline eventfld.long 0x0 0. "ORUN,Overrun Error" "0: No overrun error,1: Overrun error" line.long 0x4 "SDMACTRL,Target DMA Control" bitfld.long 0x4 4.--5. "DMAWIDTH,Width of DMA Operations" "0: Byte,1: Byte,2: Half word (16 bits),?" bitfld.long 0x4 2.--3. "DMATB,DMA Write (To-bus) Trigger" "0: DMA not used,1: DMA enabled for one frame (ended by DMA or..,2: DMA enabled until turned off,?" newline bitfld.long 0x4 0.--1. "DMAFB,DMA Read (From-bus) Trigger" "0: DMA not used,1: DMA is enabled for one frame,2: DMA enabled until turned off,?" group.long 0x2C++0x3 line.long 0x0 "SDATACTRL,Target Data Control" rbitfld.long 0x0 31. "RXEMPTY,Receive Is Empty" "0: Not empty,1: Empty" rbitfld.long 0x0 30. "TXFULL,Transmit Is Full" "0: Not full,1: Full" newline hexmask.long.byte 0x0 24.--28. 1. "RXCOUNT,Count of Bytes in Receive" hexmask.long.byte 0x0 16.--20. 1. "TXCOUNT,Count of Bytes in Transmit" newline bitfld.long 0x0 6.--7. "RXTRIG,Receive Trigger Level" "0: Trigger when not empty,1: Trigger when 1/4 or more full,2: Trigger when 1/2 or more full,3: Trigger when 3/4 or more full" bitfld.long 0x0 4.--5. "TXTRIG,Transmit Trigger Level" "0: Trigger when empty,1: Trigger when 1/4 full or less,2: Trigger when 1/2 full or less,3: Default. Trigger when 1 less than full or less" newline bitfld.long 0x0 3. "UNLOCK,Unlock" "0: RXTRIG and TXTRIG fields cannot be changed on a..,1: RXTRIG and TXTRIG fields can be changed on a.." bitfld.long 0x0 1. "FLUSHFB,Flush the From-bus Buffer or FIFO" "0,1" newline bitfld.long 0x0 0. "FLUSHTB,Flush the To-bus Buffer or FIFO" "0,1" wgroup.long 0x30++0xF line.long 0x0 "SWDATAB,Target Write Data Byte" bitfld.long 0x0 16. "END_ALSO,End Also" "0: Not the end. There are more bytes in the message.,1: End. This bit marks the last byte of the message." bitfld.long 0x0 8. "END,End" "0: Not the end. There are more bytes in the message.,1: End. This bit marks the last byte of the message." newline hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" line.long 0x4 "SWDATABE,Target Write Data Byte End" hexmask.long.byte 0x4 0.--7. 1. "DATA,Data" line.long 0x8 "SWDATAH,Target Write Data Half-word" bitfld.long 0x8 16. "END,End of message" "0: Not the end. There are more bytes in the message.,1: End. This bit marks the last byte of the message." hexmask.long.byte 0x8 8.--15. 1. "DATA1,Data 1" newline hexmask.long.byte 0x8 0.--7. 1. "DATA0,Data 0" line.long 0xC "SWDATAHE,Target Write Data Half-word End" hexmask.long.byte 0xC 8.--15. 1. "DATA1,Data 1" hexmask.long.byte 0xC 0.--7. 1. "DATA0,Data 0" rgroup.long 0x40++0x3 line.long 0x0 "SRDATAB,Target Read Data Byte" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data 0" rgroup.long 0x48++0x3 line.long 0x0 "SRDATAH,Target Read Data Halfword" hexmask.long.byte 0x0 8.--15. 1. "MSB,The second byte read from the target" hexmask.long.byte 0x0 0.--7. 1. "LSB,The first byte read from the target" wgroup.long 0x54++0x3 line.long 0x0 "SWDATAB1,Target Write Data Byte" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" wgroup.long 0x54++0x3 line.long 0x0 "SWDATAH1,Target Write Data Halfword" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" rgroup.long 0x5C++0x7 line.long 0x0 "SCAPABILITIES2,Target Capabilities 2" bitfld.long 0x0 23. "SSTWR,Target-Target(s)-Tunnel Write Capable" "0: Not write capable,1: Write capable" bitfld.long 0x0 22. "SSTSUB,Target-Target(s)-Tunnel Subscriber Capable" "0: Not subscriber capable,1: Subscriber capable" newline bitfld.long 0x0 21. "AASA,Supports SETAASA" "0: Does not support SETAASA,1: Supports SETAASA" bitfld.long 0x0 18.--19. "GROUP,Group" "0: Does not supports v1.1 Group addressing,1: Supports one group,2: Supports two groups,3: Supports three groups" newline bitfld.long 0x0 17. "SLVRST,Target Reset" "0: Does not support Target Reset,1: Supports Target Reset" bitfld.long 0x0 16. "V1_1,Version 1.1" "0: Does not support GETCAPS,1: Supports GETCAPS" newline bitfld.long 0x0 9. "IBIXREG,In-Band Interrupt Extended Register" "0: Does not support extended registers for IBIs,1: Supports extended registers for IBIs" bitfld.long 0x0 8. "IBIEXT,In-Band Interrupt EXTDATA" "0: Does not support IBIEXT,1: Supports IBIEXT" newline bitfld.long 0x0 6. "I2CDEVID,I2C Device ID" "0: Does not support I2C device ID,1: Supports I2C device ID" bitfld.long 0x0 5. "I2CRST,I2C Software Reset" "0: Does not support I2C software reset,1: Supports I2C software reset" newline bitfld.long 0x0 4. "I2C10B,I2C 10-bit Address" "0: Does not support 10-bit I2C address,1: Supports 10-bit I2C address" hexmask.long.byte 0x0 0.--3. 1. "MAPCNT,Map Count" line.long 0x4 "SCAPABILITIES,Target Capabilities" bitfld.long 0x4 31. "DMA,Direct Memory Access" "0: Not supported,1: Supported" bitfld.long 0x4 30. "INT,Interrupts" "0: Not supported,1: Supported" newline bitfld.long 0x4 28.--29. "FIFORX,FIFO Receive" "0: Two or three,1: Four,2: Eight,3: 16 or larger" bitfld.long 0x4 26.--27. "FIFOTX,FIFO Transmit" "0: Two,1: Four,2: Eight,3: 16 or larger" newline bitfld.long 0x4 23.--25. "EXTFIFO,External FIFO" "0: No external FIFO is available,1: Standard available or free external FIFO,2: Request track external FIFO,?,?,?,?,?" bitfld.long 0x4 21. "TIMECTRL,Time Control" "0: No time control enabled,1: At least one time-control type supported" newline hexmask.long.byte 0x4 16.--20. 1. "IBI_MR_HJ,In-Band Interrupts Controller Requests Hot-Join Events" hexmask.long.byte 0x4 12.--15. 1. "CCCHANDLE,Common Command Codes Handling" newline bitfld.long 0x4 10.--11. "SADDR,Static Address" "0: No static address,1: Static address is fixed in hardware,2: Hardware controls the static address dynamically..,3: SCONFIG register supplies the static address" bitfld.long 0x4 9. "MASTER,Controller" "0: Not supported,1: Supported" newline bitfld.long 0x4 6.--7. "HDRSUPP,High Data Rate Support" "0: No HDR modes supported,1: Double Data Rate mode supported,?,?" hexmask.long.byte 0x4 2.--5. 1. "IDREG,ID Register" newline bitfld.long 0x4 0.--1. "IDENA,ID 48b Handler" "0: Application,1: Hardware,2: Hardware but the I3C module instance handles ID..,3: A part number register (PARTNO)" group.long 0x68++0x13 line.long 0x0 "SMAXLIMITS,Target Maximum Limits" hexmask.long.word 0x0 16.--27. 1. "MAXWR,Maximum Write Length" hexmask.long.word 0x0 0.--11. 1. "MAXRD,Maximum Read Length" line.long 0x4 "SIDPARTNO,Target ID Part Number" hexmask.long 0x4 0.--31. 1. "PARTNO,Part number" line.long 0x8 "SIDEXT,Target ID Extension" hexmask.long.byte 0x8 16.--23. 1. "BCR,Bus Characteristics Register" hexmask.long.byte 0x8 8.--15. 1. "DCR,Device Characteristic Register" line.long 0xC "SVENDORID,Target Vendor ID" hexmask.long.word 0xC 0.--14. 1. "VID,Vendor ID" line.long 0x10 "STCCLOCK,Target Time Control Clock" hexmask.long.byte 0x10 8.--15. 1. "FREQ,Clock Frequency" hexmask.long.byte 0x10 0.--7. 1. "ACCURACY,Clock Accuracy" rgroup.long 0x7C++0x3 line.long 0x0 "SMSGMAPADDR,Target Message Map Address" hexmask.long.byte 0x0 16.--19. 1. "MAPLASTM2,Matched Previous Index 2" hexmask.long.byte 0x0 8.--11. 1. "MAPLASTM1,Matched Previous Address Index 1" newline bitfld.long 0x0 4. "LASTSTATIC,Last Static Address Matched" "0: I3C dynamic address,1: I2C static address" hexmask.long.byte 0x0 0.--3. 1. "MAPLAST,Matched Address Index" group.long 0x80++0x17 line.long 0x0 "MCONFIG_EXT,Controller Extended Configuration" bitfld.long 0x0 18.--19. "I3C_CASR_DEL,I3C CAS Delay After Repeated START" "0: No Delay,1: Increases SCL clock period by 1/2.,2: Increases SCL clock period by 1.,3: Increases SCL clock period by 1 1/2." bitfld.long 0x0 16.--17. "I3C_CAS_DEL,I3C CAS Delay after START" "0: No Delay,1: Increases SCL clock period by 1/2.,2: Increases SCL clock period by 1.,3: Increases SCL clock period by 1 1/2." newline bitfld.long 0x0 9.--11. "I2C_A10BEXT,I2C_A10BEXT" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8. "I2C_A10B,I2C_A10B" "0: Disabled,1: Enabled for 10-bit addressing." newline bitfld.long 0x0 4. "I2CHS,I2C HS" "0,1" hexmask.long.byte 0x0 0.--3. 1. "I2CBLOW,I2C BAUD Low" line.long 0x4 "MCTRL,Controller Control" hexmask.long.byte 0x4 16.--23. 1. "RDTERM,Read Terminate Counter" hexmask.long.byte 0x4 9.--15. 1. "ADDR,Address" newline bitfld.long 0x4 8. "DIR,Direction" "0: Write,1: Read" bitfld.long 0x4 6.--7. "IBIRESP,In-Band Interrupt Response" "0: ACK (acknowledge),1: NACK (reject),2: Acknowledge with mandatory byte,3: Manual" newline bitfld.long 0x4 4.--5. "TYPE,Bus Type with EmitStartAddr" "0: I3C,1: I2C,2: DDR,?" bitfld.long 0x4 0.--2. "REQUEST,Request" "0: NONE,1: EMITSTARTADDR,2: EMITSTOP,3: IBIACKNACK,4: PROCESSDAA,?,6: Force Exit and Target Reset,7: AUTOIBI" line.long 0x8 "MSTATUS,Controller Status" hexmask.long.byte 0x8 24.--30. 1. "IBIADDR,IBI Address" eventfld.long 0x8 19. "NOWMASTER,Module Is Now Controller" "0: Module has not become controller,1: Module has become controller" newline rbitfld.long 0x8 15. "ERRWARN,Error Or Warning" "0: No error or warning,1: Error or warning" eventfld.long 0x8 13. "IBIWON,In-Band Interrupt (IBI) Won" "0: No IBI arbitration won,1: IBI arbitration won" newline rbitfld.long 0x8 12. "TXNOTFULL,TX Buffer or FIFO Not Full" "0: Receive buffer or FIFO full,1: Receive buffer or FIFO not full" rbitfld.long 0x8 11. "RXPEND,RXPEND" "0: No receive message pending,1: Receive message pending" newline eventfld.long 0x8 10. "COMPLETE,Complete" "0: Not complete,1: Complete" eventfld.long 0x8 9. "MCTRLDONE,Controller Control Done" "0: Not done,1: Done" newline eventfld.long 0x8 8. "SLVSTART,Target Start" "0: Target not requesting START,1: Target requesting START" rbitfld.long 0x8 6.--7. "IBITYPE,In-Band Interrupt (IBI) Type" "0: NONE,1: In-Band Interrupt,2: Controller Request,3: Hot-Join" newline rbitfld.long 0x8 5. "NACKED,Not Acknowledged" "0: Not NACKed,1: NACKed (not acknowledged)" rbitfld.long 0x8 4. "BETWEEN,Between" "0: Inactive,1: Active" newline rbitfld.long 0x8 0.--2. "STATE,State Of The Controller" "0: IDLE,1: SLVREQ,2: MSGSDR,3: NORMACT,4: MSGDDR,5: DAA,6: IBIACK,7: IBIRCV" line.long 0xC "MIBIRULES,Controller In-band Interrupt Registry and Rules" bitfld.long 0xC 31. "NOBYTE,No IBI byte" "0: With mandatory IBI byte,1: Without mandatory IBI byte" bitfld.long 0xC 30. "MSB0,Most Significant Address Bit Is 0" "0: MSB is not 0.,1: For all I3C dynamic addresses MSB is 0." newline hexmask.long.byte 0xC 24.--29. 1. "ADDR4,ADDR4" hexmask.long.byte 0xC 18.--23. 1. "ADDR3,ADDR3" newline hexmask.long.byte 0xC 12.--17. 1. "ADDR2,ADDR2" hexmask.long.byte 0xC 6.--11. 1. "ADDR1,ADDR1" newline hexmask.long.byte 0xC 0.--5. 1. "ADDR0,ADDR0" line.long 0x10 "MINTSET,Controller Interrupt Set" bitfld.long 0x10 19. "NOWMASTER,Now Controller (now this I3C module is a controller) Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x10 15. "ERRWARN,Error or Warning (ERRWARN) Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 13. "IBIWON,In-Band Interrupt (IBI) Won Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x10 12. "TXNOTFULL,TX buffer/FIFO is not full interrupt enable" "0: Disable,1: Enable" newline bitfld.long 0x10 11. "RXPEND,Rx Pending Interrupt Enable" "0,1" bitfld.long 0x10 10. "COMPLETE,Completed Message Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 9. "MCTRLDONE,Controller Control Done Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x10 8. "SLVSTART,Target Start Interrupt Enable" "0: Disable,1: Enable" line.long 0x14 "MINTCLR,Controller Interrupt Clear" eventfld.long 0x14 19. "NOWMASTER,NOWCONTROLLER Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 15. "ERRWARN,ERRWARN Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" newline eventfld.long 0x14 13. "IBIWON,IBIWON Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 12. "TXNOTFULL,TXNOTFULL Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" newline eventfld.long 0x14 11. "RXPEND,RXPEND Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 10. "COMPLETE,COMPLETE Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" newline eventfld.long 0x14 9. "MCTRLDONE,MCTRLDONE Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 8. "SLVSTART,SLVSTART Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" rgroup.long 0x98++0x3 line.long 0x0 "MINTMASKED,Controller Interrupt Mask" bitfld.long 0x0 19. "NOWMASTER,NOWCONTROLLER Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" bitfld.long 0x0 15. "ERRWARN,ERRWARN Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" newline bitfld.long 0x0 13. "IBIWON,IBIWON Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" bitfld.long 0x0 12. "TXNOTFULL,TXNOTFULL Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" newline bitfld.long 0x0 11. "RXPEND,RXPEND Interrupt Mask" "0,1" bitfld.long 0x0 10. "COMPLETE,COMPLETE Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" newline bitfld.long 0x0 9. "MCTRLDONE,MCTRLDONE Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" bitfld.long 0x0 8. "SLVSTART,SLVSTART Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" group.long 0x9C++0x7 line.long 0x0 "MERRWARN,Controller Errors and Warnings" eventfld.long 0x0 20. "TIMEOUT,Timeout Error" "0: No error,1: Error" eventfld.long 0x0 19. "INVREQ,Invalid Request Error" "0: No error,1: Error" newline eventfld.long 0x0 18. "MSGERR,Message Error" "0: No error,1: Error" eventfld.long 0x0 17. "OWRITE,Over-write Error" "0: No error,1: Error" newline eventfld.long 0x0 16. "OREAD,Over-read Error" "0: No error,1: Error" eventfld.long 0x0 10. "HCRC,High Data Rate CRC Error" "0: No error,1: Error" newline eventfld.long 0x0 9. "HPAR,High Data Rate Parity" "0: No error,1: Error" eventfld.long 0x0 3. "WRABT,Write Abort Error" "0: No error,1: Error" newline eventfld.long 0x0 2. "NACK,Not Acknowledge Error" "0: No error,1: Error" line.long 0x4 "MDMACTRL,Controller DMA Control" bitfld.long 0x4 4.--5. "DMAWIDTH,DMA Width" "0: Byte,1: Byte,2: Halfword (16 bits),?" bitfld.long 0x4 2.--3. "DMATB,DMA To Bus" "0: DMA is not used,1: Enable DMA for one frame (ended by DMA or..,2: Enable DMA until DMA is turned off,?" newline bitfld.long 0x4 0.--1. "DMAFB,DMA From Bus" "0: DMA is not used,1: Enable DMA for one frame,2: Enable DMA until DMA is turned off,?" group.long 0xAC++0x3 line.long 0x0 "MDATACTRL,Controller Data Control" rbitfld.long 0x0 31. "RXEMPTY,Receive Is Empty" "0: Receive FIFO or buffer is not yet empty.,1: Receive FIFO or buffer is empty." rbitfld.long 0x0 30. "TXFULL,Transmit Is Full" "0: Transmit FIFO or buffer is not yet full.,1: Transmit FIFO or buffer is full." newline hexmask.long.byte 0x0 24.--28. 1. "RXCOUNT,Receive Byte Count" hexmask.long.byte 0x0 16.--20. 1. "TXCOUNT,Transmit Byte Count" newline bitfld.long 0x0 6.--7. "RXTRIG,Receive Trigger Level" "0: Trigger when not empty,1: Trigger when 1/4 full or more,2: Trigger when 1/2 full or more,3: Trigger when 3/4 full or more" bitfld.long 0x0 4.--5. "TXTRIG,Transmit Trigger Level" "0: Trigger when empty,1: Trigger when 1/4 full or less,2: Trigger when 1/2 full or less,3: Default. Trigger when 1 less than full or less" newline bitfld.long 0x0 3. "UNLOCK,Unlock" "0: Locked. RXTRIG and TXTRIG fields cannot be..,1: Unlocked. RXTRIG and TXTRIG fields can be.." bitfld.long 0x0 1. "FLUSHFB,Flush From-bus Buffer or FIFO" "0: No action,1: Flush the buffer" newline bitfld.long 0x0 0. "FLUSHTB,Flush To-bus Buffer or FIFO" "0: No action,1: Flush the buffer" wgroup.long 0xB0++0xF line.long 0x0 "MWDATAB,Controller Write Data Byte" bitfld.long 0x0 16. "END_ALSO,End of Message Also" "0: Not the end. More bytes are assumed to be in the..,1: End. The END bit marks the last byte of the.." bitfld.long 0x0 8. "END,End of Message" "0: Not the end. More bytes are assumed to be in the..,1: End. The END bit marks the last byte of the.." newline hexmask.long.byte 0x0 0.--7. 1. "VALUE,Data Byte" line.long 0x4 "MWDATABE,Controller Write Data Byte End" hexmask.long.byte 0x4 0.--7. 1. "VALUE,Data" line.long 0x8 "MWDATAH,Controller Write Data Halfword" bitfld.long 0x8 16. "END,End of message" "0: Not the end. More bytes are assumed to be in the..,1: End. The END bit marks the last byte of the.." hexmask.long.byte 0x8 8.--15. 1. "DATA1,Data Byte 1" newline hexmask.long.byte 0x8 0.--7. 1. "DATA0,Data Byte 0" line.long 0xC "MWDATAHE,Controller Write Data Halfword End" hexmask.long.byte 0xC 8.--15. 1. "DATA1,Data Byte 1" hexmask.long.byte 0xC 0.--7. 1. "DATA0,Data Byte 0" rgroup.long 0xC0++0x3 line.long 0x0 "MRDATAB,Controller Read Data Byte" hexmask.long.byte 0x0 0.--7. 1. "VALUE,Value" rgroup.long 0xC8++0x3 line.long 0x0 "MRDATAH,Controller Read Data Halfword" hexmask.long.byte 0x0 8.--15. 1. "MSB,MSB" hexmask.long.byte 0x0 0.--7. 1. "LSB,LSB" wgroup.long 0xCC++0x3 line.long 0x0 "MWDATAB1,Controller Write Byte Data 1(to bus)" hexmask.long.byte 0x0 0.--7. 1. "VALUE,Value" wgroup.long 0xCC++0x7 line.long 0x0 "MWDATAH1,Controller Write Halfword Data (to bus)" hexmask.long.word 0x0 0.--15. 1. "VALUE,Value" line.long 0x4 "MWMSG_SDR_CONTROL,Controller Write Message Control in SDR mode" hexmask.long.byte 0x4 11.--15. 1. "LEN,Length" bitfld.long 0x4 10. "I2C,I2C" "0: I3C message,1: I2C message" newline bitfld.long 0x4 8. "END,End of SDR Message" "0: Not the end. SDR message ends waiting for a new..,1: End. SDR message ends at the STOP." hexmask.long.byte 0x4 1.--7. 1. "ADDR,Address" newline bitfld.long 0x4 0. "DIR,Direction" "0: Write,1: Read" wgroup.long 0xD0++0x3 line.long 0x0 "MWMSG_SDR_DATA,Controller Write Message Data in SDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA16B,Data" rgroup.long 0xD4++0x3 line.long 0x0 "MRMSG_SDR,Controller Read Message in SDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" wgroup.long 0xD8++0x3 line.long 0x0 "MWMSG_DDR_CONTROL,Controller Write Message in DDR mode: First Control Word" hexmask.long.word 0x0 0.--15. 1. "ADDRCMD,Address Command" wgroup.long 0xD8++0x3 line.long 0x0 "MWMSG_DDR_CONTROL2,Controller Write Message in DDR mode Control 2" bitfld.long 0x0 14. "END,End of message" "0: Not the end. DDR message ends waiting for a new..,1: End. DDR message ends on HDR Exit." hexmask.long.word 0x0 0.--9. 1. "LEN,Length of Message" wgroup.long 0xD8++0x3 line.long 0x0 "MWMSG_DDR_DATA,Controller Write Message Data in DDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA16B,Data" rgroup.long 0xDC++0x3 line.long 0x0 "MRMSG_DDR,Controller Read Message in DDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" group.long 0xE4++0x3 line.long 0x0 "MDYNADDR,Controller Dynamic Address" hexmask.long.byte 0x0 1.--7. 1. "DADDR,Dynamic address" bitfld.long 0x0 0. "DAVALID,Dynamic address valid" "0: No valid DA assigned,1: Valid DA assigned" group.long 0x100++0x3 line.long 0x0 "SRSTACTTIME,Timing Rules for TargetReset Recovery" hexmask.long.byte 0x0 16.--23. 1. "CUSRSTTIM,Custom Time to Recover" hexmask.long.byte 0x0 8.--15. 1. "SYSRSTTIM,Time to Recover from Chip Reset" newline hexmask.long.byte 0x0 0.--7. 1. "PERRSTTIM,Time to Recover from the I3C peripheral" group.long 0x10C++0x7 line.long 0x0 "SCCCMASK,CCC Mask for Unhandled CCCs" bitfld.long 0x0 6. "VENDD,VENDD" "0: Suppressed,1: Passed to application" bitfld.long 0x0 5. "VENDB,VENDB" "0: Suppressed,1: Passed to application" newline bitfld.long 0x0 4. "MEXTD,MEXTD" "0: Suppressed,1: Passed to application" bitfld.long 0x0 3. "MEXTB,MEXTB" "0: Suppressed,1: Passed to application" newline bitfld.long 0x0 2. "BASEDX,BASEDX" "0: Suppressed,1: Passed to application" bitfld.long 0x0 1. "BASEBX,BASEBX" "0: Suppressed,1: Passed to application" newline bitfld.long 0x0 0. "BASE,Base" "0: Suppressed,1: Passed to application" line.long 0x4 "SERRWARNMASK,Target Errors and Warnings Mask" bitfld.long 0x4 11. "S0S1,S0S1 mask" "0: Deny,1: Allow" bitfld.long 0x4 10. "HCRC,HCRC mask" "0: Deny,1: Allow" newline bitfld.long 0x4 9. "HPAR,HPAR mask" "0: Deny,1: Allow" bitfld.long 0x4 8. "SPAR,SPAR mask" "0: Deny,1: Allow" newline bitfld.long 0x4 4. "INVSTART,INVSTART mask" "0: Deny,1: Allow" bitfld.long 0x4 3. "TERM,TERM mask" "0: Deny,1: Allow" newline bitfld.long 0x4 2. "URUNNACK,URUNNACK mask" "0: Deny,1: Allow" bitfld.long 0x4 1. "URUN,URUN mask" "0: Deny,1: Allow" newline bitfld.long 0x4 0. "ORUN,ORUN mask" "0: Deny,1: Allow" rgroup.long 0x11C++0x3 line.long 0x0 "SMAPCTRL0,Map Feature Control 0" bitfld.long 0x0 8.--10. "CAUSE,Cause" "0: No information. This value occurs when not..,1: Set using ENTDAA,2: Set using SETDASA SETAASA or SETNEWDA,3: Cleared using RSTDAA,4: Auto MAP change happened last. The change may..,?,?,?" hexmask.long.byte 0x0 1.--7. 1. "DA,Dynamic Address" newline bitfld.long 0x0 0. "ENA,Enable Primary Dynamic Address" "0: Disable,1: Enable" group.long 0x120++0x3 line.long 0x0 "SMAPCTRL1,Map Feature Control 1" hexmask.long.byte 0x0 24.--31. 1. "DCR,DCR" bitfld.long 0x0 13. "AUTO,Auto DAA" "0: Disabled,1: Enabled" newline bitfld.long 0x0 12. "NACK,Not Acknowledged" "0: Do not always NACK messages,1: Always NACK messages" bitfld.long 0x0 9.--11. "SA10B,Static Address 10-bit Extension" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 8. "MAPSA,MAP Static Address" "0: I3C Dynamic Address,1: Static Address (I2C style)" hexmask.long.byte 0x0 1.--7. 1. "ADDR,Address" newline bitfld.long 0x0 0. "ENA,Enable" "0: Disable,1: Enable" group.long 0x140++0x7 line.long 0x0 "IBIEXT1,Extended IBI Data 1" hexmask.long.byte 0x0 24.--31. 1. "EXT3,Extra byte 3" hexmask.long.byte 0x0 16.--23. 1. "EXT2,Extra byte 2" newline hexmask.long.byte 0x0 8.--15. 1. "EXT1,Extra byte 1" rbitfld.long 0x0 4.--6. "MAX,Maximum" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0.--2. "CNT,Count" "0,1,2,3,4,5,6,7" line.long 0x4 "IBIEXT2,Extended IBI Data 2" hexmask.long.byte 0x4 24.--31. 1. "EXT7,Extra byte 7" hexmask.long.byte 0x4 16.--23. 1. "EXT6,Extra byte 6" newline hexmask.long.byte 0x4 8.--15. 1. "EXT5,Extra byte 5" hexmask.long.byte 0x4 0.--7. 1. "EXT4,Extra byte 4" group.long 0xFF0++0x3 line.long 0x0 "SELFRESET,Self Reset" hexmask.long.tbyte 0x0 8.--31. 1. "KEY,Key" bitfld.long 0x0 0. "RST,Reset" "0: No reset,1: Reset" tree.end tree "AON_INTM" base ad:0x44580000 group.long 0x0++0x3 line.long 0x0 "INTM_MM,Monitor Mode" bitfld.long 0x0 0. "MM,Monitor Mode" "0: Disable,1: Enable" wgroup.long 0x4++0x3 line.long 0x0 "INTM_IACK,Interrupt Acknowledge" hexmask.long.word 0x0 0.--9. 1. "IRQ,Interrupt Request" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x44580008 ad:0x44580018 ad:0x44580028 ad:0x44580038) tree "mon[$1]" base $2 group.long ($2)++0xB line.long 0x0 "INTM_IRQSEL,Interrupt Request Select for Monitor mon_index" hexmask.long.word 0x0 0.--9. 1. "IRQ,Interrupt Request" line.long 0x4 "INTM_LATENCY,Interrupt Latency for Monitor mon_index" hexmask.long.tbyte 0x4 0.--23. 1. "LAT,Latency" line.long 0x8 "INTM_TIMER,Timer for Monitor mon_index" hexmask.long.tbyte 0x8 0.--23. 1. "TIMER,Timer" rgroup.long ($2+0xC)++0x3 line.long 0x0 "INTM_STATUS,Status for Monitor mon_index" bitfld.long 0x0 0. "STATUS,Monitor status" "0: Did not exceed,1: Exceeded" tree.end repeat.end tree.end tree "AON_IRQSTEER" base ad:0x44680000 repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x4)++0x3 line.long 0x0 "CHn_MASK[$1],Channel n Interrupt Mask Register" hexmask.long 0x0 0.--31. 1. "MASKFLD,Mask bits" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x44)++0x3 line.long 0x0 "CHn_SET[$1],Channel n Interrupt Set Register" hexmask.long 0x0 0.--31. 1. "FORCEFLD,Force interrupt." repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x84)++0x3 line.long 0x0 "CHn_STATUS[$1],Channel n Interrupt Status Register" hexmask.long 0x0 0.--31. 1. "STATUS,Status of an interrupt" repeat.end group.long 0xC4++0x3 line.long 0x0 "CHn_MINTDIS,Channel n Master Interrupt Disable Register" hexmask.long.byte 0x0 0.--7. 1. "DISABLE,Each bit of this field disables the corresponding interrupts in table above." rgroup.long 0xC8++0x3 line.long 0x0 "CHn_MSTRSTAT,Channel n Master Status Register" bitfld.long 0x0 0. "STATUS,Status of all interrupts" "0: No interrupts are asserted.,1: At least one interrupt is asserted." tree.end tree "AON_LPI2C" tree "LPI2C1" base ad:0x44340000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree "LPI2C2" base ad:0x44350000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree.end tree "AON_LPIT" base ad:0x442F0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "EXT_TRIG,Number of External Trigger Inputs" hexmask.long.byte 0x4 0.--7. 1. "CHANNEL,Number of Timer Channels" group.long 0x8++0x13 line.long 0x0 "MCR,Module Control" bitfld.long 0x0 3. "DBG_EN,Debug Mode Enable" "0: Stops timer channels,1: Allows timer channels to continue running" bitfld.long 0x0 2. "DOZE_EN,DOZE Mode Enable" "0: Stops timer channels,1: Allows timer channels to continue running" newline bitfld.long 0x0 1. "SW_RST,Software Reset" "0: Does not reset,1: Resets" bitfld.long 0x0 0. "M_CEN,Module Clock Enable" "0: Disable,1: Enable" line.long 0x4 "MSR,Module Status" eventfld.long 0x4 3. "TIF3,Channel 3 Timer Interrupt Flag" "0: Not timed out,1: Timed out" eventfld.long 0x4 2. "TIF2,Channel 2 Timer Interrupt Flag" "0: Not timed out,1: Timed out" newline eventfld.long 0x4 1. "TIF1,Channel 1 Timer Interrupt Flag" "0: Not timed out,1: Timed out" eventfld.long 0x4 0. "TIF0,Channel 0 Timer Interrupt Flag" "0: Not timed out,1: Timed out" line.long 0x8 "MIER,Module Interrupt Enable" bitfld.long 0x8 3. "TIE3,Channel 3 Timer Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 2. "TIE2,Channel 2 Timer Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "TIE1,Channel 1 Timer Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TIE0,Channel 0 Timer Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "SETTEN,Set Timer Enable" bitfld.long 0xC 3. "SET_T_EN_3,Set Timer 3 Enable" "0: No effect,1: Enables timer channel 3" bitfld.long 0xC 2. "SET_T_EN_2,Set Timer 2 Enable" "0: No Effect,1: Enables timer channel 2" newline bitfld.long 0xC 1. "SET_T_EN_1,Set Timer 1 Enable" "0: No Effect,1: Enables timer channel 1" bitfld.long 0xC 0. "SET_T_EN_0,Set Timer 0 Enable" "0: No effect,1: Enables timer channel 0" line.long 0x10 "CLRTEN,Clear Timer Enable" bitfld.long 0x10 3. "CLR_T_EN_3,Clear Timer 3 Enable" "0: No action,1: Turns TCTRL3[T_EN] = 0 for timer channel 3" bitfld.long 0x10 2. "CLR_T_EN_2,Clear Timer 2 Enable" "0: No action,1: Turns TCTRL2[T_EN] = 0 for timer channel 2" newline bitfld.long 0x10 1. "CLR_T_EN_1,Clear Timer 1 Enable" "0: No action,1: Turns TCTRL1[T_EN] = 0 for timer channel 1" bitfld.long 0x10 0. "CLR_T_EN_0,Clear Timer 0 Enable" "0: No action,1: Turns TCTRL0[T_EN] = 0 for timer channel 0" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x442F0020 ad:0x442F0030 ad:0x442F0040 ad:0x442F0050) tree "CHANNEL[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "TVAL,Timer Value" hexmask.long 0x0 0.--31. 1. "TMR_VAL,Timer Value" rgroup.long ($2+0x4)++0x3 line.long 0x0 "CVAL,Current Timer Value" hexmask.long 0x0 0.--31. 1. "TMR_CUR_VAL,Current Timer Value" group.long ($2+0x8)++0x3 line.long 0x0 "TCTRL,Timer Control" hexmask.long.byte 0x0 24.--27. 1. "TRG_SEL,Trigger Select" bitfld.long 0x0 23. "TRG_SRC,Trigger Source" "0: External,1: Internal" bitfld.long 0x0 18. "TROT,Timer Reload on Trigger" "0: Does not reload,1: Reloads" newline bitfld.long 0x0 17. "TSOI,Timer Stop on Interrupt" "0: Does not stop,1: Stops" bitfld.long 0x0 16. "TSOT,Timer Start on Trigger" "0: Immediately,1: When a rising edge is detected" bitfld.long 0x0 2.--3. "MODE,Timer Operation Mode" "0: 32-bit periodic counter,1: Dual 16-bit periodic counter,2: 32-bit trigger accumulator,3: 32-bit trigger input capture" newline bitfld.long 0x0 1. "CHAIN,Chain Channel" "0: Disabled,1: Enabled" bitfld.long 0x0 0. "T_EN,Timer Enable" "0: Disable,1: Enable" tree.end repeat.end tree.end tree "AON_LPSPI" tree "LPSPI1" base ad:0x44360000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree "LPSPI2" base ad:0x44370000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree.end tree "AON_LPTMR" base ad:0x44300000 group.long 0x0++0xF line.long 0x0 "CSR,Control Status" bitfld.long 0x0 8. "TDRE,Timer DMA Request Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TCF,Timer Compare Flag" "0: CNR != (CMR + 1),1: CNR = (CMR + 1)" bitfld.long 0x0 6. "TIE,Timer Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 4.--5. "TPS,Timer Pin Select" "0: Input 0,1: Input 1,2: Input 2,3: Input 3" newline bitfld.long 0x0 3. "TPP,Timer Pin Polarity" "0: Active-high,1: Active-low" bitfld.long 0x0 2. "TFC,Timer Free-Running Counter" "0: Reset if TCF set,1: Reset on overflow" bitfld.long 0x0 1. "TMS,Timer Mode Select" "0: Time Counter mode,1: Pulse Counter mode" bitfld.long 0x0 0. "TEN,Timer Enable" "0: Disable,1: Enable" line.long 0x4 "PSR,Prescale and Glitch Filter" hexmask.long.byte 0x4 3.--6. 1. "PRESCALE,Prescale/Glitch Filter Value" bitfld.long 0x4 2. "PBYP,Prescaler/Glitch Filter Bypass" "0: Prescaler/glitch filter enable,1: Prescaler/glitch filter bypass" bitfld.long 0x4 0.--1. "PCS,Prescaler/Glitch Filter Clock Select" "0: Clock 0,1: Clock 1,2: Clock 2,3: Clock 3" line.long 0x8 "CMR,Compare" hexmask.long 0x8 0.--31. 1. "COMPARE,Compare Value" line.long 0xC "CNR,Counter" hexmask.long 0xC 0.--31. 1. "COUNTER,Counter Value" tree.end tree "AON_LPTPM" tree "LPTPM1" base ad:0x44310000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x4 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x4 0.--7. 1. "CHAN,Channel Count" group.long 0x8++0x3 line.long 0x0 "GLOBAL,TPM Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x0 0. "NOUPDATE,No Update" "0: Internal double-buffered registers update as..,1: Internal double-buffered registers do not update" group.long 0x10++0xF line.long 0x0 "SC,Status and Control" bitfld.long 0x0 8. "DMA,DMA Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" newline bitfld.long 0x0 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "CPWMS,Center-Aligned PWM Select" "0: Up counting mode,1: Up-down counting mode" newline bitfld.long 0x0 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter clock,2: TPM counter increments on the rising edge of..,3: TPM counter increments on the rising edge of the.." bitfld.long 0x0 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x4 "CNT,Counter" hexmask.long 0x4 0.--31. 1. "COUNT,Counter Value" line.long 0x8 "MOD,Modulo" hexmask.long 0x8 0.--31. 1. "MOD,Modulo Value" line.long 0xC "STATUS,Capture and Compare Status" eventfld.long 0xC 8. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0xC 3. "CH3F,Channel 3 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 2. "CH2F,Channel 2 Flag" "0: Event not occurred,1: Event occurred" eventfld.long 0xC 1. "CH1F,Channel 1 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 0. "CH0F,Channel 0 Flag" "0: Event not occurred,1: Event occurred" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x44310020 ad:0x44310028 ad:0x44310030 ad:0x44310038) tree "CHANNEL[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CSC,Channel n Status and Control" eventfld.long 0x0 7. "CHF,Channel Flag" "0: Event not occurred,1: Event occurred" bitfld.long 0x0 6. "CHIE,Channel Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "MSB,Channel Mode Select B" "0,1" bitfld.long 0x0 4. "MSA,Channel Mode Select A" "0,1" bitfld.long 0x0 3. "ELSB,Edge or Level Select B" "0,1" bitfld.long 0x0 2. "ELSA,Edge or Level Select A" "0,1" bitfld.long 0x0 0. "DMA,DMA Enable" "0: Disable,1: Enable" line.long 0x4 "CV,Channel n Value" hexmask.long 0x4 0.--31. 1. "VAL,Channel Value" tree.end repeat.end base ad:0x44310000 group.long 0x64++0x3 line.long 0x0 "COMBINE,Combine Channel" bitfld.long 0x0 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 8. "COMBINE1,Combine Channels 2 and 3" "0: Independent,1: Combined" newline bitfld.long 0x0 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 0. "COMBINE0,Combine Channels 0 and 1" "0: Independent,1: Combined" group.long 0x6C++0x7 line.long 0x0 "TRIG,Channel Trigger" bitfld.long 0x0 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 3" bitfld.long 0x0 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 2" newline bitfld.long 0x0 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 1" bitfld.long 0x0 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 0" line.long 0x4 "POL,Channel Polarity" bitfld.long 0x4 3. "POL3,Channel 3 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 2. "POL2,Channel 2 Polarity" "0: Active high,1: Active low" newline bitfld.long 0x4 1. "POL1,Channel 1 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 0. "POL0,Channel 0 Polarity" "0: Active high,1: Active low" group.long 0x78++0x3 line.long 0x0 "FILTER,Filter Control" hexmask.long.byte 0x0 12.--15. 1. "CH3FVAL,Channel 3 Filter Value" hexmask.long.byte 0x0 8.--11. 1. "CH2FVAL,Channel 2 Filter Value" newline hexmask.long.byte 0x0 4.--7. 1. "CH1FVAL,Channel 1 Filter Value" hexmask.long.byte 0x0 0.--3. 1. "CH0FVAL,Channel 0 Filter Value" group.long 0x80++0x7 line.long 0x0 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x0 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x0 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Decreasing (counter decrement),1: Increasing (counter increment)" newline rbitfld.long 0x0 1. "TOFDIR,Timer Overflow Direction" "0: Bottom of counting,1: Top of counting" bitfld.long 0x0 0. "QUADEN,Quadrature Decoder Enable" "0: Disable,1: Enable" line.long 0x4 "CONF,Configuration" bitfld.long 0x4 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or channel 1 pin input capture" bitfld.long 0x4 23. "TRGSRC,Trigger Source" "0: External,1: Internal (channel pin input capture)" newline bitfld.long 0x4 22. "TRGPOL,Trigger Polarity" "0: Active high,1: Active low" bitfld.long 0x4 19. "CPOT,Counter Pause on Trigger" "0: TPM counter continues,1: TPM counter pauses" newline bitfld.long 0x4 18. "CROT,Counter Reload on Trigger" "0: No reload,1: Reload" bitfld.long 0x4 17. "CSOO,Counter Stop on Overflow" "0: TPM counter continues,1: TPM counter stops" newline bitfld.long 0x4 16. "CSOT,Counter Start on Trigger" "0: Counter starts immediately,1: Counter starts after detection of a rising edge.." bitfld.long 0x4 9. "GTBEEN,GTB Enable" "0: Internally generated TPM counter,1: Externally generated GTB counter" newline bitfld.long 0x4 8. "GTBSYNC,GTB Synchronization" "0: Disable,1: Enable" bitfld.long 0x4 6.--7. "DBGMODE,Debug Mode" "0: TPM counter pauses,?,?,3: TPM counter continues" newline bitfld.long 0x4 5. "DOZEEN,Doze Enable" "0: TPM counter continues,1: TPM counter pauses" tree.end tree "LPTPM2" base ad:0x44320000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x4 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x4 0.--7. 1. "CHAN,Channel Count" group.long 0x8++0x3 line.long 0x0 "GLOBAL,TPM Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x0 0. "NOUPDATE,No Update" "0: Internal double-buffered registers update as..,1: Internal double-buffered registers do not update" group.long 0x10++0xF line.long 0x0 "SC,Status and Control" bitfld.long 0x0 8. "DMA,DMA Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" newline bitfld.long 0x0 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "CPWMS,Center-Aligned PWM Select" "0: Up counting mode,1: Up-down counting mode" newline bitfld.long 0x0 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter clock,2: TPM counter increments on the rising edge of..,3: TPM counter increments on the rising edge of the.." bitfld.long 0x0 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x4 "CNT,Counter" hexmask.long 0x4 0.--31. 1. "COUNT,Counter Value" line.long 0x8 "MOD,Modulo" hexmask.long 0x8 0.--31. 1. "MOD,Modulo Value" line.long 0xC "STATUS,Capture and Compare Status" eventfld.long 0xC 8. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0xC 3. "CH3F,Channel 3 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 2. "CH2F,Channel 2 Flag" "0: Event not occurred,1: Event occurred" eventfld.long 0xC 1. "CH1F,Channel 1 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 0. "CH0F,Channel 0 Flag" "0: Event not occurred,1: Event occurred" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x44320020 ad:0x44320028 ad:0x44320030 ad:0x44320038) tree "CHANNEL[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CSC,Channel n Status and Control" eventfld.long 0x0 7. "CHF,Channel Flag" "0: Event not occurred,1: Event occurred" bitfld.long 0x0 6. "CHIE,Channel Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "MSB,Channel Mode Select B" "0,1" bitfld.long 0x0 4. "MSA,Channel Mode Select A" "0,1" bitfld.long 0x0 3. "ELSB,Edge or Level Select B" "0,1" bitfld.long 0x0 2. "ELSA,Edge or Level Select A" "0,1" bitfld.long 0x0 0. "DMA,DMA Enable" "0: Disable,1: Enable" line.long 0x4 "CV,Channel n Value" hexmask.long 0x4 0.--31. 1. "VAL,Channel Value" tree.end repeat.end base ad:0x44320000 group.long 0x64++0x3 line.long 0x0 "COMBINE,Combine Channel" bitfld.long 0x0 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 8. "COMBINE1,Combine Channels 2 and 3" "0: Independent,1: Combined" newline bitfld.long 0x0 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 0. "COMBINE0,Combine Channels 0 and 1" "0: Independent,1: Combined" group.long 0x6C++0x7 line.long 0x0 "TRIG,Channel Trigger" bitfld.long 0x0 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 3" bitfld.long 0x0 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 2" newline bitfld.long 0x0 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 1" bitfld.long 0x0 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 0" line.long 0x4 "POL,Channel Polarity" bitfld.long 0x4 3. "POL3,Channel 3 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 2. "POL2,Channel 2 Polarity" "0: Active high,1: Active low" newline bitfld.long 0x4 1. "POL1,Channel 1 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 0. "POL0,Channel 0 Polarity" "0: Active high,1: Active low" group.long 0x78++0x3 line.long 0x0 "FILTER,Filter Control" hexmask.long.byte 0x0 12.--15. 1. "CH3FVAL,Channel 3 Filter Value" hexmask.long.byte 0x0 8.--11. 1. "CH2FVAL,Channel 2 Filter Value" newline hexmask.long.byte 0x0 4.--7. 1. "CH1FVAL,Channel 1 Filter Value" hexmask.long.byte 0x0 0.--3. 1. "CH0FVAL,Channel 0 Filter Value" group.long 0x80++0x7 line.long 0x0 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x0 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x0 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Decreasing (counter decrement),1: Increasing (counter increment)" newline rbitfld.long 0x0 1. "TOFDIR,Timer Overflow Direction" "0: Bottom of counting,1: Top of counting" bitfld.long 0x0 0. "QUADEN,Quadrature Decoder Enable" "0: Disable,1: Enable" line.long 0x4 "CONF,Configuration" bitfld.long 0x4 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or channel 1 pin input capture" bitfld.long 0x4 23. "TRGSRC,Trigger Source" "0: External,1: Internal (channel pin input capture)" newline bitfld.long 0x4 22. "TRGPOL,Trigger Polarity" "0: Active high,1: Active low" bitfld.long 0x4 19. "CPOT,Counter Pause on Trigger" "0: TPM counter continues,1: TPM counter pauses" newline bitfld.long 0x4 18. "CROT,Counter Reload on Trigger" "0: No reload,1: Reload" bitfld.long 0x4 17. "CSOO,Counter Stop on Overflow" "0: TPM counter continues,1: TPM counter stops" newline bitfld.long 0x4 16. "CSOT,Counter Start on Trigger" "0: Counter starts immediately,1: Counter starts after detection of a rising edge.." bitfld.long 0x4 9. "GTBEEN,GTB Enable" "0: Internally generated TPM counter,1: Externally generated GTB counter" newline bitfld.long 0x4 8. "GTBSYNC,GTB Synchronization" "0: Disable,1: Enable" bitfld.long 0x4 6.--7. "DBGMODE,Debug Mode" "0: TPM counter pauses,?,?,3: TPM counter continues" newline bitfld.long 0x4 5. "DOZEEN,Doze Enable" "0: TPM counter continues,1: TPM counter pauses" tree.end tree.end tree "AON_LPUART" tree "LPUART1" base ad:0x44380000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree "LPUART2" base ad:0x44390000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree.end tree "AON_LPWDOG" tree "LPWDOG1" base ad:0x442D0000 group.long 0x0++0xF line.long 0x0 "CS,WDOG Control and Status" bitfld.long 0x0 15. "WIN,WDOG Window" "0: Disable,1: Enable" eventfld.long 0x0 14. "FLG,WDOG Interrupt Flag" "0: No interrupt occurred,1: An interrupt occurred" bitfld.long 0x0 13. "CMD32EN,Command 32 Enable" "0: Disable,1: Enable" bitfld.long 0x0 12. "PRES,WDOG Prescaler" "0: Disable,1: Enable" newline rbitfld.long 0x0 11. "ULK,Unlock Status" "0: Locked,1: Unlocked" rbitfld.long 0x0 10. "RCS,Reconfiguration Success" "0: Unsuccessful,1: Successful" bitfld.long 0x0 8.--9. "CLK,WDOG Clock" "0,1,2,3" bitfld.long 0x0 7. "EN,WDOG Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 6. "INT,WDOG Interrupt" "0: Disable,1: Enable" bitfld.long 0x0 5. "UPDATE,Updates Allowed" "0: Updates not allowed,1: Updates allowed" bitfld.long 0x0 3.--4. "TST,WDOG Test" "0: Disable WDOG Test mode,1: Enable WDOG User mode,2: Enable WDOG Test mode,3: Enable WDOG Test mode" bitfld.long 0x0 2. "DBG,Debug Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "WAIT,Wait Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "STOP,Stop Enable" "0: Disable,1: Enable" line.long 0x4 "CNT,WDOG Counter" hexmask.long.byte 0x4 8.--15. 1. "CNTHIGH,Counter Low Byte" hexmask.long.byte 0x4 0.--7. 1. "CNTLOW,Counter High Byte" line.long 0x8 "TOVAL,WDOG Timeout Value" hexmask.long.byte 0x8 8.--15. 1. "TOVALHIGH,Timeout Value High" hexmask.long.byte 0x8 0.--7. 1. "TOVALLOW,Timeout Value Low" line.long 0xC "WIN,Watchdog Window" hexmask.long.byte 0xC 8.--15. 1. "WINHIGH,High Byte" hexmask.long.byte 0xC 0.--7. 1. "WINLOW,Low Byte" tree.end tree "LPWDOG2" base ad:0x442E0000 group.long 0x0++0xF line.long 0x0 "CS,WDOG Control and Status" bitfld.long 0x0 15. "WIN,WDOG Window" "0: Disable,1: Enable" eventfld.long 0x0 14. "FLG,WDOG Interrupt Flag" "0: No interrupt occurred,1: An interrupt occurred" bitfld.long 0x0 13. "CMD32EN,Command 32 Enable" "0: Disable,1: Enable" bitfld.long 0x0 12. "PRES,WDOG Prescaler" "0: Disable,1: Enable" newline rbitfld.long 0x0 11. "ULK,Unlock Status" "0: Locked,1: Unlocked" rbitfld.long 0x0 10. "RCS,Reconfiguration Success" "0: Unsuccessful,1: Successful" bitfld.long 0x0 8.--9. "CLK,WDOG Clock" "0,1,2,3" bitfld.long 0x0 7. "EN,WDOG Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 6. "INT,WDOG Interrupt" "0: Disable,1: Enable" bitfld.long 0x0 5. "UPDATE,Updates Allowed" "0: Updates not allowed,1: Updates allowed" bitfld.long 0x0 3.--4. "TST,WDOG Test" "0: Disable WDOG Test mode,1: Enable WDOG User mode,2: Enable WDOG Test mode,3: Enable WDOG Test mode" bitfld.long 0x0 2. "DBG,Debug Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "WAIT,Wait Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "STOP,Stop Enable" "0: Disable,1: Enable" line.long 0x4 "CNT,WDOG Counter" hexmask.long.byte 0x4 8.--15. 1. "CNTHIGH,Counter Low Byte" hexmask.long.byte 0x4 0.--7. 1. "CNTLOW,Counter High Byte" line.long 0x8 "TOVAL,WDOG Timeout Value" hexmask.long.byte 0x8 8.--15. 1. "TOVALHIGH,Timeout Value High" hexmask.long.byte 0x8 0.--7. 1. "TOVALLOW,Timeout Value Low" line.long 0xC "WIN,Watchdog Window" hexmask.long.byte 0xC 8.--15. 1. "WINHIGH,High Byte" hexmask.long.byte 0xC 0.--7. 1. "WINLOW,Low Byte" tree.end tree.end tree "AON_LSTCU" base ad:0x445A0000 group.long 0x8++0x3 line.long 0x0 "ERR_STAT,Error Status" bitfld.long 0x0 17. "RFSF,Recoverable Fault Status" "0: No recoverable fault,1: Recoverable fault has occurred" bitfld.long 0x0 16. "UFSF,Unrecoverable Fault Status" "0: No unrecoverable fault,1: Unrecoverable fault has occurred" newline rbitfld.long 0x0 1. "INVP_MB,Invalid Pointer MBIST" "0: No invalid pointer to BIST controller.,1: Invalid BIST pointer specified during BIST.." group.long 0x10++0x3 line.long 0x0 "ERR_FM,Error Fault Mapping" bitfld.long 0x0 1. "INVPFMMB,Invalid BIST Pointer Fault Mapping during MBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" rgroup.long 0x60++0x3 line.long 0x0 "MB_RSTAT0,MBIST Run Status 0" bitfld.long 0x0 0. "MBSTAT0,MBIST Run Result Status Bit 0" "0: Pass,1: Fail" group.long 0x180++0x3 line.long 0x0 "MBFM0,MBIST Fault Mapping 0" bitfld.long 0x0 0. "MBSTATFM0,MBIST_RUN_STAT0[MBSTAT0] Fault Mapping" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" group.long 0x260++0x3 line.long 0x0 "STAG,Stagger" hexmask.long.byte 0x0 8.--15. 1. "MB_DELAY,MBIST Delay" group.long 0x270++0xB line.long 0x0 "PH1_DUR,Phase 1 Duration" hexmask.long.word 0x0 0.--9. 1. "PH1DUR,Phase 1 Duration" line.long 0x4 "ISODUR,Isolation Duration" hexmask.long.word 0x4 16.--25. 1. "DIS_DUR,Disable Duration" hexmask.long.word 0x4 0.--9. 1. "EN_DUR,Enable Duration" line.long 0x8 "SRCENDUR,Synchronous Reset Clock Enable Duration" hexmask.long.word 0x8 0.--9. 1. "CLKENDUR,Synchronous Reset Clock Enable Duration (in LSTCU clock cycles)" group.long 0x300++0x3 line.long 0x0 "MBPTR0,MBIST Scheduler Pointer" bitfld.long 0x0 31. "MBEOL,MBIST End of List" "0: Not end of list,1: End of list" bitfld.long 0x0 8. "MBCSM,MBIST Concurrent or Sequential Mode" "0: Sequential mode,1: Concurrent mode" newline hexmask.long.byte 0x0 0.--7. 1. "MBPTR,MBIST Pointer" tree.end tree "AON_M33_CACHE_CTRL" tree "M33_CACHE_CTRLPC" base ad:0x44400000 group.long 0x0++0xF line.long 0x0 "CCR,Cache control register" bitfld.long 0x0 31. "GO,Initiate Cache Command" "0: Write: no effect. Read: no cache command active.,1: Write: initiate command indicated by bits 27-24." bitfld.long 0x0 27. "PUSHW1,Push Way 1" "0: No operation,1: When setting the GO bit push all modified lines.." newline bitfld.long 0x0 26. "INVW1,Invalidate Way 1" "0: No operation,1: When setting the GO bit invalidate all lines in.." bitfld.long 0x0 25. "PUSHW0,Push Way 0" "0: No operation,1: When setting the GO bit push all modified lines.." newline bitfld.long 0x0 24. "INVW0,Invalidate Way 0" "0: No operation,1: When setting the GO bit invalidate all lines in.." bitfld.long 0x0 3. "FRCNOALLC,Forces no allocation on cache misses" "0: Allocation on cache misses,1: Forces no allocation on cache misses (must also.." newline bitfld.long 0x0 2. "FRCWT,Force Write Through mode" "0: Does not force all cacheable spaces to write..,1: Forces all cacheable spaces to write through" bitfld.long 0x0 1. "ENWRBUF,Enable Write Buffer" "0: Write buffer disabled,1: Write buffer enabled" newline bitfld.long 0x0 0. "ENCACHE,Cache enable" "0: Cache disabled,1: Cache enabled" line.long 0x4 "CLCR,Cache line control register" bitfld.long 0x4 27. "LACC,Line access type" "0: Read,1: Write" bitfld.long 0x4 26. "LADSEL,Line Address Select" "0: Cache address,1: Physical address" newline bitfld.long 0x4 24.--25. "LCMD,Line Command" "0: Search and read or write,1: Invalidate,2: Push,3: Clear" bitfld.long 0x4 22. "LCWAY,Line Command Way" "0,1" newline bitfld.long 0x4 21. "LCIMB,Line Command Initial Modified Bit" "0,1" bitfld.long 0x4 20. "LCIVB,Line Command Initial Valid Bit" "0,1" newline bitfld.long 0x4 16. "TDSEL,Tag/Data Select" "0: Data,1: Tag" bitfld.long 0x4 14. "WSEL,Way select" "0: Way 0,1: Way 1" newline hexmask.long.word 0x4 2.--13. 1. "CACHEADDR,Cache address" bitfld.long 0x4 0. "LGO,Initiate Cache Line Command" "0: Write: no effect. Read: no line command active.,1: Write: initiate line command indicated by bits.." line.long 0x8 "CSAR,Cache search address register" hexmask.long 0x8 2.--31. 1. "PHYADDR,Physical Address" bitfld.long 0x8 0. "LGO,Initiate Cache Line Command" "0: Write: no effect. Read: no line command active.,1: Write: initiate line command indicated by bits.." line.long 0xC "CCVR,Cache read/write value register" hexmask.long 0xC 0.--31. 1. "DATA,Cache read/write Data" tree.end tree "M33_CACHE_CTRLPS" base ad:0x44400800 group.long 0x0++0xF line.long 0x0 "CCR,Cache control register" bitfld.long 0x0 31. "GO,Initiate Cache Command" "0: Write: no effect. Read: no cache command active.,1: Write: initiate command indicated by bits 27-24." bitfld.long 0x0 27. "PUSHW1,Push Way 1" "0: No operation,1: When setting the GO bit push all modified lines.." newline bitfld.long 0x0 26. "INVW1,Invalidate Way 1" "0: No operation,1: When setting the GO bit invalidate all lines in.." bitfld.long 0x0 25. "PUSHW0,Push Way 0" "0: No operation,1: When setting the GO bit push all modified lines.." newline bitfld.long 0x0 24. "INVW0,Invalidate Way 0" "0: No operation,1: When setting the GO bit invalidate all lines in.." bitfld.long 0x0 3. "FRCNOALLC,Forces no allocation on cache misses" "0: Allocation on cache misses,1: Forces no allocation on cache misses (must also.." newline bitfld.long 0x0 2. "FRCWT,Force Write Through mode" "0: Does not force all cacheable spaces to write..,1: Forces all cacheable spaces to write through" bitfld.long 0x0 1. "ENWRBUF,Enable Write Buffer" "0: Write buffer disabled,1: Write buffer enabled" newline bitfld.long 0x0 0. "ENCACHE,Cache enable" "0: Cache disabled,1: Cache enabled" line.long 0x4 "CLCR,Cache line control register" bitfld.long 0x4 27. "LACC,Line access type" "0: Read,1: Write" bitfld.long 0x4 26. "LADSEL,Line Address Select" "0: Cache address,1: Physical address" newline bitfld.long 0x4 24.--25. "LCMD,Line Command" "0: Search and read or write,1: Invalidate,2: Push,3: Clear" bitfld.long 0x4 22. "LCWAY,Line Command Way" "0,1" newline bitfld.long 0x4 21. "LCIMB,Line Command Initial Modified Bit" "0,1" bitfld.long 0x4 20. "LCIVB,Line Command Initial Valid Bit" "0,1" newline bitfld.long 0x4 16. "TDSEL,Tag/Data Select" "0: Data,1: Tag" bitfld.long 0x4 14. "WSEL,Way select" "0: Way 0,1: Way 1" newline hexmask.long.word 0x4 2.--13. 1. "CACHEADDR,Cache address" bitfld.long 0x4 0. "LGO,Initiate Cache Line Command" "0: Write: no effect. Read: no line command active.,1: Write: initiate line command indicated by bits.." line.long 0x8 "CSAR,Cache search address register" hexmask.long 0x8 2.--31. 1. "PHYADDR,Physical Address" bitfld.long 0x8 0. "LGO,Initiate Cache Line Command" "0: Write: no effect. Read: no line command active.,1: Write: initiate line command indicated by bits.." line.long 0xC "CCVR,Cache read/write value register" hexmask.long 0xC 0.--31. 1. "DATA,Cache read/write Data" tree.end tree.end tree "AON_MCM" base ad:0xE0080000 group.long 0x10++0xB line.long 0x0 "ISCR,Interrupt Status and Control" bitfld.long 0x0 31. "FIDCE,FPU Input Denormal Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 28. "FIXCE,FPU Inexact Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 27. "FUFCE,FPU Underflow Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 26. "FOFCE,FPU Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 25. "FDZCE,FPU Divide-by-Zero Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 24. "FIOCE,FPU Invalid Operation Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 20. "CWBEE,Cache Write Buffer Error Enable" "0: Disable,1: Enable" rbitfld.long 0x0 15. "FIDC,FPU Input Denormal Interrupt Status" "0: No interrupt,1: Interrupt occurred" rbitfld.long 0x0 12. "FIXC,FPU Inexact Interrupt Status" "0: No interrupt,1: Interrupt occurred" newline rbitfld.long 0x0 11. "FUFC,FPU Underflow Interrupt status" "0: No interrupt,1: Interrupt occurred" rbitfld.long 0x0 10. "FOFC,FPU Overflow Interrupt Status" "0: No interrupt,1: Interrupt occurred" rbitfld.long 0x0 9. "FDZC,FPU Divide-by-Zero Interrupt Status" "0: No interrupt,1: Interrupt occurred" newline rbitfld.long 0x0 8. "FIOC,FPU Invalid Operation Interrupt Status" "0: No interrupt,1: Interrupt occurred" eventfld.long 0x0 4. "CWBER,Cache Write Buffer Error Status" "0: No error,1: Error occurred" rbitfld.long 0x0 3. "DHREQ,Debug Halt Request Indicator" "0: Not initiated,1: Initiated" newline eventfld.long 0x0 2. "NMI,Nonmaskable Interrupt Pending" "0: No pending NMI,1: Pending NMI" eventfld.long 0x0 1. "IRQ,ETB-Related Interrupt Pending" "0: No pending IRQ,1: Pending IRQ" line.long 0x4 "ETBCC,ETB Counter Control" bitfld.long 0x4 3. "RLRQ,Reload Request" "0: No effect,1: Reload the counter (clear pending interrupt.." bitfld.long 0x4 1.--2. "RSPT,Response Type" "0: No response,1: Generate a normal interrupt,2: Generate an NMI,3: Generate a debug halt" bitfld.long 0x4 0. "CNTEN,Counter Enable" "0: Disable,1: Enable" line.long 0x8 "ETBRR,ETB Reload" hexmask.long.word 0x8 0.--10. 1. "RELOAD,Byte Count Reload Value" rgroup.long 0x1C++0xF line.long 0x0 "ETBCV,ETB Counter Value" hexmask.long.word 0x0 0.--10. 1. "COUNTER,Byte Count Counter Value" line.long 0x4 "FADR,Write Buffer Fault Address" hexmask.long 0x4 0.--31. 1. "ADDRESS,Fault Address" line.long 0x8 "FATR,Store Buffer Fault Attributes" bitfld.long 0x8 31. "BEOVR,Bus Error Overrun" "0: No overrun,1: Overrun" hexmask.long.byte 0x8 8.--11. 1. "BEMN,Bus Error Master Number" bitfld.long 0x8 7. "BEWT,Bus Error Write" "0: Read,1: Write" newline bitfld.long 0x8 4.--5. "BESZ,Bus Error Size" "0: 8-bit,1: 16-bit,2: 32-bit,?" bitfld.long 0x8 1. "BEMD,Bus Error Privilege Level" "0: User mode,1: Supervisor or privileged mode" bitfld.long 0x8 0. "BEDA,Bus Error Data Access Type" "0: Instruction,1: Data" line.long 0xC "FDR,Store Buffer Fault Data" hexmask.long 0xC 0.--31. 1. "DATA,Fault Data" tree.end tree "AON_MICFIL" base ad:0x44520000 group.long 0x0++0xB line.long 0x0 "CTRL_1,AON_MICFIL Control 1" bitfld.long 0x0 31. "MDIS,Module Disable" "0: Normal mode,1: DLL mode" bitfld.long 0x0 30. "DOZEN,Doze Enable" "0,1" newline bitfld.long 0x0 29. "PDMIEN,AON_MICFIL Enable" "0: Stops AON_MICFIL operation,1: Starts AON_MICFIL operation" bitfld.long 0x0 28. "DBG,Debug Mode" "0: Normal,1: Debug" newline bitfld.long 0x0 27. "SRES,Software Reset" "0: No action,1: Software reset" bitfld.long 0x0 26. "DBGE,Module Enable in Debug" "0: Disables after completing the current frame,1: Enables operation" newline bitfld.long 0x0 24.--25. "DISEL,DMA Interrupt Selection" "0: Disables DMA and interrupt requests,1: Enables DMA requests,2: Enables interrupt requests,?" bitfld.long 0x0 23. "ERREN,Error Interruption Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 20. "DECFILS,Decimation Filter Enable in Stop" "0: Stops decimation filter,1: Keeps decimation filter running" bitfld.long 0x0 16. "FSYNCEN,Frame Synchronization Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 7. "CH7EN,Channel 7 Enable" "0,1" bitfld.long 0x0 6. "CH6EN,Channel 6 Enable" "0,1" newline bitfld.long 0x0 5. "CH5EN,Channel 5 Enable" "0,1" bitfld.long 0x0 4. "CH4EN,Channel 4 Enable" "0,1" newline bitfld.long 0x0 3. "CH3EN,Channel 3 Enable" "0,1" bitfld.long 0x0 2. "CH2EN,Channel 2 Enable" "0,1" newline bitfld.long 0x0 1. "CH1EN,Channel 1 Enable" "0,1" bitfld.long 0x0 0. "CH0EN,Channel 0 Enable" "0,1" line.long 0x4 "CTRL_2,AON_MICFIL Control 2" bitfld.long 0x4 25.--27. "QSEL,Quality Mode" "0: Medium-Quality mode,1: High-Quality mode,?,?,4: Very-Low-Quality 2 mode,5: Very-Low-Quality 1 mode,6: Very-Low-Quality 0 mode,7: Low-Quality mode" hexmask.long.byte 0x4 16.--19. 1. "CICOSR,CIC Decimation Rate" newline hexmask.long.byte 0x4 0.--7. 1. "CLKDIV,Clock Divider" line.long 0x8 "STAT,AON_MICFIL Status" rbitfld.long 0x8 31. "BSY_FIL,Busy Flag" "0: AON_MICFIL is stopped,1: AON_MICFIL is running" rbitfld.long 0x8 30. "FIR_RDY,Filter Data Ready" "0: Not reliable,1: Reliable" newline eventfld.long 0x8 29. "LOWFREQF,Low Frequency Flag" "0: CLKDIV value is OK,1: CLKDIV value is too low" eventfld.long 0x8 7. "CH7F,Channel 7 Output Data Flag" "0: Not surpassed,1: Surpassed" newline eventfld.long 0x8 6. "CH6F,Channel 6 Output Data Flag" "0: Not surpassed,1: Surpassed" eventfld.long 0x8 5. "CH5F,Channel 5 Output Data Flag" "0: Not surpassed,1: Surpassed" newline eventfld.long 0x8 4. "CH4F,Channel 4 Output Data Flag" "0: Not surpassed,1: Surpassed" eventfld.long 0x8 3. "CH3F,Channel 3 Output Data Flag" "0: Not surpassed,1: Surpassed" newline eventfld.long 0x8 2. "CH2F,Channel 2 Output Data Flag" "0: Not surpassed,1: Surpassed" eventfld.long 0x8 1. "CH1F,Channel 1 Output Data Flag" "0: Not surpassed,1: Surpassed" newline eventfld.long 0x8 0. "CH0F,Channel 0 Output Data Flag" "0: Not surpassed,1: Surpassed" group.long 0x10++0x7 line.long 0x0 "FIFO_CTRL,AON_MICFIL FIFO Control" hexmask.long.byte 0x0 0.--4. 1. "FIFOWMK,FIFO Watermark Control" line.long 0x4 "FIFO_STAT,AON_MICFIL FIFO Status" eventfld.long 0x4 15. "FIFOUND7,FIFO Underflow Exception Flag for Channel 7" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" eventfld.long 0x4 14. "FIFOUND6,FIFO Underflow Exception Flag for Channel 6" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" newline eventfld.long 0x4 13. "FIFOUND5,FIFO Underflow Exception Flag for Channel 5" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" eventfld.long 0x4 12. "FIFOUND4,FIFO Underflow Exception Flag for Channel 4" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" newline eventfld.long 0x4 11. "FIFOUND3,FIFO Underflow Exception Flag for Channel 3" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" eventfld.long 0x4 10. "FIFOUND2,FIFO Underflow Exception Flag for Channel 2" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" newline eventfld.long 0x4 9. "FIFOUND1,FIFO Underflow Exception Flag for Channel 1" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" eventfld.long 0x4 8. "FIFOUND0,FIFO Underflow Exception Flag for Channel 0" "0: No exception by FIFO underflow,1: Exception by FIFO underflow" newline eventfld.long 0x4 7. "FIFOOVF7,FIFO Overflow Exception Flag for Channel 7" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x4 6. "FIFOOVF6,FIFO Overflow Exception Flag for Channel 6" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" newline eventfld.long 0x4 5. "FIFOOVF5,FIFO Overflow Exception Flag for Channel 5" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x4 4. "FIFOOVF4,FIFO Overflow Exception Flag for Channel 4" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" newline eventfld.long 0x4 3. "FIFOOVF3,FIFO Overflow Exception Flag for Channel 3" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x4 2. "FIFOOVF2,FIFO Overflow Exception Flag for Channel 2" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" newline eventfld.long 0x4 1. "FIFOOVF1,FIFO Overflow Exception Flag for Channel 1" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x4 0. "FIFOOVF0,FIFO Overflow Exception Flag for Channel 0" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x24)++0x3 line.long 0x0 "DATACH[$1],AON_MICFIL Output Result" hexmask.long 0x0 0.--31. 1. "DATA,Channel n Data" repeat.end group.long 0x64++0x7 line.long 0x0 "DC_CTRL,AON_MICFIL DC Remover Control" bitfld.long 0x0 14.--15. "DCCONFIG7,Channel 7 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" bitfld.long 0x0 12.--13. "DCCONFIG6,Channel 6 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" newline bitfld.long 0x0 10.--11. "DCCONFIG5,Channel 5 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" bitfld.long 0x0 8.--9. "DCCONFIG4,Channel 4 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" newline bitfld.long 0x0 6.--7. "DCCONFIG3,Channel 3 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" bitfld.long 0x0 4.--5. "DCCONFIG2,Channel 2 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" newline bitfld.long 0x0 2.--3. "DCCONFIG1,Channel 1 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" bitfld.long 0x0 0.--1. "DCCONFIG0,Channel 0 DC Remover Configuration" "0: 20 Hz (PDM_CLK = 3.072 MHz),1: 13.3 Hz (PDM_CLK = 3.072 MHz),2: 40 Hz (PDM_CLK = 3.072 MHz),3: DC remover is bypassed" line.long 0x4 "DC_OUT_CTRL,AON_MICFIL Output DC Remover Control" bitfld.long 0x4 14.--15. "DCCONFIG7,Channel 7 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" bitfld.long 0x4 12.--13. "DCCONFIG6,Channel 6 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" newline bitfld.long 0x4 10.--11. "DCCONFIG5,Channel 5 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" bitfld.long 0x4 8.--9. "DCCONFIG4,Channel 4 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" newline bitfld.long 0x4 6.--7. "DCCONFIG3,Channel 3 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" bitfld.long 0x4 4.--5. "DCCONFIG2,Channel 2 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" newline bitfld.long 0x4 2.--3. "DCCONFIG1,Channel 1 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" bitfld.long 0x4 0.--1. "DCCONFIG0,Channel 0 DC Remover Configuration" "0: 20 Hz (FS = 48 kHz),1: 13.3 Hz (FS = 48 kHz),2: 40 Hz (FS = 48 kHz),3: DC remover is bypassed" group.long 0x74++0x3 line.long 0x0 "RANGE_CTRL,AON_MICFIL Range Control" hexmask.long.byte 0x0 28.--31. 1. "RANGEADJ7,Channel 7 Range Adjustment" hexmask.long.byte 0x0 24.--27. 1. "RANGEADJ6,Channel 6 Range Adjustment" newline hexmask.long.byte 0x0 20.--23. 1. "RANGEADJ5,Channel 5 Range Adjustment" hexmask.long.byte 0x0 16.--19. 1. "RANGEADJ4,Channel 4 Range Adjustment" newline hexmask.long.byte 0x0 12.--15. 1. "RANGEADJ3,Channel 3 Range Adjustment" hexmask.long.byte 0x0 8.--11. 1. "RANGEADJ2,Channel 2 Range Adjustment" newline hexmask.long.byte 0x0 4.--7. 1. "RANGEADJ1,Channel 1 Range Adjustment" hexmask.long.byte 0x0 0.--3. 1. "RANGEADJ0,Channel 0 Range Adjustment" group.long 0x7C++0x7 line.long 0x0 "RANGE_STAT,AON_MICFIL Range Status" eventfld.long 0x0 23. "RANGEUNF7,Channel 7 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x0 22. "RANGEUNF6,Channel 6 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x0 21. "RANGEUNF5,Channel 5 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x0 20. "RANGEUNF4,Channel 4 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x0 19. "RANGEUNF3,Channel 3 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x0 18. "RANGEUNF2,Channel 2 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x0 17. "RANGEUNF1,Channel 1 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x0 16. "RANGEUNF0,Channel 0 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x0 7. "RANGEOVF7,Channel 7 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x0 6. "RANGEOVF6,Channel 6 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" newline eventfld.long 0x0 5. "RANGEOVF5,Channel 5 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x0 4. "RANGEOVF4,Channel 4 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" newline eventfld.long 0x0 3. "RANGEOVF3,Channel 3 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x0 2. "RANGEOVF2,Channel 2 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" newline eventfld.long 0x0 1. "RANGEOVF1,Channel 1 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x0 0. "RANGEOVF0,Channel 0 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" line.long 0x4 "FSYNC_CTRL,Frame Synchronization Control" hexmask.long 0x4 0.--31. 1. "FSYNCLEN,Frame Synchronization Window Length" rgroup.long 0x84++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 24.--27. 1. "NUM_HWVAD,Number of HWVADs" bitfld.long 0x4 19. "HWVAD_ZCD,HWVAD zero-cross detector active" "0,1" newline bitfld.long 0x4 17. "HWVAD_ENERGY_MODE,HWVAD energy mode active" "0,1" bitfld.long 0x4 16. "HWVAD,HWVAD active" "0,1" newline bitfld.long 0x4 11. "DC_OUT_BYPASS,Output DC Remover Bypass" "0: Active,1: Disabled" bitfld.long 0x4 10. "DC_BYPASS,Input DC Remover Bypass" "0: Active,1: Disabled" newline bitfld.long 0x4 9. "LOW_POWER,Low-Power Decimation Filter" "0,1" bitfld.long 0x4 8. "FIL_OUT_WIDTH_24B,Filter Output Width" "0: 16 bits,1: 24 bits" newline hexmask.long.byte 0x4 4.--7. 1. "FIFO_PTRWID,FIFO Pointer Width" hexmask.long.byte 0x4 0.--3. 1. "NPAIR,Number of Microphone Pairs" group.long 0x90++0x13 line.long 0x0 "VAD0_CTRL_1,Voice Activity Detector 0 Control register" bitfld.long 0x0 24.--26. "VADCHSEL,Voice Activity Detector Channel Selector" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 16.--19. 1. "VADCICOSR,Voice Activity Detector CIC Oversampling Rate" newline hexmask.long.byte 0x0 8.--12. 1. "VADINITT,Voice Activity Detector Initialization Time" bitfld.long 0x0 4. "VADST10,Voice Activity Detector Internal Filters Initialization" "0: Normal operation.,1: Filters are initialized." newline bitfld.long 0x0 3. "VADERIE,Voice Activity Detector Error Interruption Enable" "0: HWVAD Error Interrupts disabled,1: HWVAD Error Interrupts enabled" bitfld.long 0x0 2. "VADIE,Voice Activity Detector Interruption Enable" "0: HWVAD Interrupts disabled,1: HWVAD Interrupts enabled" newline bitfld.long 0x0 1. "VADRST,Voice Activity Detector Reset" "0,1" bitfld.long 0x0 0. "VADEN,Voice Activity Detector Enable" "0: The HWVAD is disabled,1: The HWVAD is enabled" line.long 0x4 "VAD0_CTRL_2,Voice Activity Detector 0 Control register" bitfld.long 0x4 31. "VADFRENDIS,Voice Activity Detector Frame Energy Disable" "0: Frame energy calculus enabled.,1: Frame energy calculus disabled." bitfld.long 0x4 30. "VADPREFEN,Voice Activity Detector Pre Filter Enable" "0: Pre-filter is bypassed.,1: Pre-filter is enabled." newline bitfld.long 0x4 28. "VADFOUTDIS,Voice Activity Detector Force Output Disable" "0: Output is enabled.,1: Output is disabled." hexmask.long.byte 0x4 16.--21. 1. "VADFRAMET,Voice Activity Detector Frame Time" newline hexmask.long.byte 0x4 8.--11. 1. "VADINPGAIN,Voice Activity Detector Input Gain" bitfld.long 0x4 0.--1. "VADHPF,Voice Activity Detector High-Pass Filter" "0: Filter bypassed.,1: Cut-off frequency at 1750Hz.,2: Cut-off frequency at 215Hz.,3: Cut-off frequency at 102Hz." line.long 0x8 "VAD0_STAT,Voice Activity Detector 0 Status register" rbitfld.long 0x8 31. "VADINITF,Voice Activity Detector Initialization Flag" "0: HWVAD is not being initialized.,1: HWVAD is being initialized." eventfld.long 0x8 16. "VADINSATF,Voice Activity Detector Input Saturation Flag" "0: No exception,1: Exception" newline eventfld.long 0x8 0. "VADIF,Voice Activity Detector Interrupt Flag" "0: Voice activity not detected,1: Voice activity detected" line.long 0xC "VAD0_SCONFIG,Voice Activity Detector 0 Signal Configuration" bitfld.long 0xC 31. "VADSFILEN,Voice Activity Detector Signal Filter Enable" "0: Signal filter is disabled.,1: Signal filter is enabled." bitfld.long 0xC 30. "VADSMAXEN,Voice Activity Detector Signal Maximum Enable" "0: Maximum block is bypassed.,1: Maximum block is enabled." newline hexmask.long.byte 0xC 0.--3. 1. "VADSGAIN,Voice Activity Detector Signal Gain" line.long 0x10 "VAD0_NCONFIG,Voice Activity Detector 0 Noise Configuration" bitfld.long 0x10 31. "VADNFILAUTO,Voice Activity Detector Noise Filter Auto" "0: Noise filter is always enabled.,1: Noise filter is enabled/disabled based on voice.." bitfld.long 0x10 30. "VADNMINEN,Voice Activity Detector Noise Minimum Enable" "0: Minimum block is bypassed.,1: Minimum block is enabled." newline bitfld.long 0x10 29. "VADNDECEN,Voice Activity Detector Noise Decimation Enable" "0: Noise input is not decimated.,1: Noise input is decimated." bitfld.long 0x10 28. "VADNOREN,Voice Activity Detector Noise OR Enable" "0: Noise input is not decimated.,1: Noise input is decimated." newline hexmask.long.byte 0x10 8.--12. 1. "VADNFILADJ,Voice Activity Detector Noise Filter Adjustment" hexmask.long.byte 0x10 0.--3. 1. "VADNGAIN,Voice Activity Detector Noise Gain" rgroup.long 0xA4++0x3 line.long 0x0 "VAD0_NDATA,Voice Activity Detector 0 Noise Data" hexmask.long.word 0x0 0.--15. 1. "VADNDATA,Voice Activity Detector Noise Data" group.long 0xA8++0x3 line.long 0x0 "VAD0_ZCD,Voice Activity Detector 0 Zero-Crossing Detector" hexmask.long.word 0x0 16.--25. 1. "VADZCDTH,Zero-Crossing Detector Threshold" hexmask.long.byte 0x0 8.--11. 1. "VADZCDADJ,Zero-Crossing Detector Adjustment" newline bitfld.long 0x0 4. "VADZCDAND,Zero-Crossing Detector AND Behavior" "0: Uses OR to combine the ZCD result with the..,1: Uses AND to combine the ZCD result with the.." bitfld.long 0x0 2. "VADZCDAUTO,Zero-Crossing Detector Automatic Threshold" "0: The ZCD threshold is not estimated automatically,1: The ZCD threshold is estimated automatically" newline bitfld.long 0x0 0. "VADZCDEN,Zero-Crossing Detector Enable" "0: The ZCD is disabled,1: The ZCD is enabled" tree.end tree "AON_MSGINTR" tree "MSGINTR1" base ad:0x44690000 wgroup.long 0x0++0x3 line.long 0x0 "MSIIR0,Message Signaled Interrupt Index Register 0" hexmask.long.byte 0x0 0.--4. 1. "IBS,Interrupt Bit Select" rgroup.long 0x4++0x3 line.long 0x0 "MSIR0,Message Signaled Interrupt Register 0" hexmask.long 0x0 0.--31. 1. "SHn,Message sharer n has a pending interrupt." wgroup.long 0x8++0x3 line.long 0x0 "MSIIR1,Message Signaled Interrupt Index Register 1" hexmask.long.byte 0x0 0.--4. 1. "IBS,Interrupt Bit Select" rgroup.long 0xC++0x3 line.long 0x0 "MSIR1,Message Signaled Interrupt Register 1" hexmask.long 0x0 0.--31. 1. "SHn,Message sharer n has a pending interrupt." wgroup.long 0x10++0x3 line.long 0x0 "MSIIR2,Message Signaled Interrupt Index Register 2" hexmask.long.byte 0x0 0.--4. 1. "IBS,Interrupt Bit Select" rgroup.long 0x14++0x3 line.long 0x0 "MSIR2,Message Signaled Interrupt Register 2" hexmask.long 0x0 0.--31. 1. "SHn,Message sharer n has a pending interrupt." tree.end tree "MSGINTR2" base ad:0x446A0000 wgroup.long 0x0++0x3 line.long 0x0 "MSIIR0,Message Signaled Interrupt Index Register 0" hexmask.long.byte 0x0 0.--4. 1. "IBS,Interrupt Bit Select" rgroup.long 0x4++0x3 line.long 0x0 "MSIR0,Message Signaled Interrupt Register 0" hexmask.long 0x0 0.--31. 1. "SHn,Message sharer n has a pending interrupt." wgroup.long 0x8++0x3 line.long 0x0 "MSIIR1,Message Signaled Interrupt Index Register 1" hexmask.long.byte 0x0 0.--4. 1. "IBS,Interrupt Bit Select" rgroup.long 0xC++0x3 line.long 0x0 "MSIR1,Message Signaled Interrupt Register 1" hexmask.long 0x0 0.--31. 1. "SHn,Message sharer n has a pending interrupt." wgroup.long 0x10++0x3 line.long 0x0 "MSIIR2,Message Signaled Interrupt Index Register 2" hexmask.long.byte 0x0 0.--4. 1. "IBS,Interrupt Bit Select" rgroup.long 0x14++0x3 line.long 0x0 "MSIR2,Message Signaled Interrupt Register 2" hexmask.long 0x0 0.--31. 1. "SHn,Message sharer n has a pending interrupt." tree.end tree.end tree "AON_RGPIO" base ad:0x47400000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 0.--3. 1. "IRQNUM,Interrupt Number" group.long 0xC++0x13 line.long 0x0 "LOCK,Lock" bitfld.long 0x0 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x0 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x0 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x0 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." line.long 0x4 "PCNS,Pin Control Non-Secure" bitfld.long 0x4 31. "NSE31,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 30. "NSE30,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 29. "NSE29,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 28. "NSE28,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 27. "NSE27,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 26. "NSE26,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 25. "NSE25,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 24. "NSE24,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 23. "NSE23,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 22. "NSE22,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 21. "NSE21,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 20. "NSE20,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 19. "NSE19,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 18. "NSE18,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 17. "NSE17,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 16. "NSE16,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 15. "NSE15,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 14. "NSE14,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 13. "NSE13,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 12. "NSE12,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 11. "NSE11,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 10. "NSE10,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 9. "NSE9,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 8. "NSE8,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 7. "NSE7,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 6. "NSE6,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 5. "NSE5,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 4. "NSE4,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 3. "NSE3,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 2. "NSE2,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 1. "NSE1,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 0. "NSE0,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." line.long 0x8 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x8 1. "NSE1,Non-Secure Enable" "0: The interrupt output trigger or DMA request is..,1: The interrupt output trigger or DMA request is.." bitfld.long 0x8 0. "NSE0,Non-Secure Enable" "0: The interrupt output trigger or DMA request is..,1: The interrupt output trigger or DMA request is.." line.long 0xC "PCNP,Pin Control Non-Privilege" bitfld.long 0xC 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." line.long 0x10 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x10 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." bitfld.long 0x10 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." group.long 0x40++0xF line.long 0x0 "PDOR,Port Data Output Register" bitfld.long 0x0 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." line.long 0x4 "PSOR,Port Set Output Register" bitfld.long 0x4 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." line.long 0x8 "PCOR,Port Clear Output Register" bitfld.long 0x8 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." line.long 0xC "PTOR,Port Toggle Output Register" bitfld.long 0xC 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." rgroup.long 0x50++0x3 line.long 0x0 "PDIR,Port Data Input Register" bitfld.long 0x0 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." group.long 0x54++0x7 line.long 0x0 "PDDR,Port Data Direction Register" bitfld.long 0x0 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." line.long 0x4 "PIDR,Port Input Disable Register" bitfld.long 0x4 31. "PID31,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 30. "PID30,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 29. "PID29,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 28. "PID28,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 27. "PID27,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 26. "PID26,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 25. "PID25,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 24. "PID24,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 23. "PID23,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 22. "PID22,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 21. "PID21,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 20. "PID20,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 19. "PID19,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 18. "PID18,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 17. "PID17,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 16. "PID16,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 15. "PID15,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 14. "PID14,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 13. "PID13,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 12. "PID12,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 11. "PID11,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 10. "PID10,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 9. "PID9,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 8. "PID8,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 7. "PID7,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 6. "PID6,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 5. "PID5,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 4. "PID4,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 3. "PID3,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 2. "PID2,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 1. "PID1,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 0. "PID0,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." repeat 32. (increment 0x0 0x1)(increment 0x0 0x1) group.byte ($2+0x60)++0x0 line.byte 0x0 "PDR[$1],Pin Data Register a" bitfld.byte 0x0 0. "PD,Pin Data (input and output)" "0: Pin logic level is logic zero or not configured..,1: Pin logic level is logic one." repeat.end group.long 0x80++0x87 line.long 0x0 "ICR0,Interrupt Control Register 0" eventfld.long 0x0 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x0 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x0 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x0 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4 "ICR1,Interrupt Control Register 1" eventfld.long 0x4 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x4 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x8 "ICR2,Interrupt Control Register 2" eventfld.long 0x8 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x8 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x8 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x8 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0xC "ICR3,Interrupt Control Register 3" eventfld.long 0xC 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0xC 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0xC 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0xC 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x10 "ICR4,Interrupt Control Register 4" eventfld.long 0x10 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x10 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x10 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x10 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x14 "ICR5,Interrupt Control Register 5" eventfld.long 0x14 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x14 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x14 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x14 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x18 "ICR6,Interrupt Control Register 6" eventfld.long 0x18 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x18 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x18 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x18 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x1C "ICR7,Interrupt Control Register 7" eventfld.long 0x1C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x1C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x1C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x1C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x20 "ICR8,Interrupt Control Register 8" eventfld.long 0x20 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x20 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x20 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x20 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x24 "ICR9,Interrupt Control Register 9" eventfld.long 0x24 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x24 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x24 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x24 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x28 "ICR10,Interrupt Control Register 10" eventfld.long 0x28 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x28 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x28 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x28 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x2C "ICR11,Interrupt Control Register 11" eventfld.long 0x2C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x2C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x2C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x2C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x30 "ICR12,Interrupt Control Register 12" eventfld.long 0x30 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x30 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x30 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x30 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x34 "ICR13,Interrupt Control Register 13" eventfld.long 0x34 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x34 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x34 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x34 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x38 "ICR14,Interrupt Control Register 14" eventfld.long 0x38 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x38 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x38 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x38 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x3C "ICR15,Interrupt Control Register 15" eventfld.long 0x3C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x3C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x3C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x3C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x40 "ICR16,Interrupt Control Register 16" eventfld.long 0x40 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x40 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x40 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x40 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x44 "ICR17,Interrupt Control Register 17" eventfld.long 0x44 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x44 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x44 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x44 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x48 "ICR18,Interrupt Control Register 18" eventfld.long 0x48 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x48 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x48 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x48 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4C "ICR19,Interrupt Control Register 19" eventfld.long 0x4C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x4C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x50 "ICR20,Interrupt Control Register 20" eventfld.long 0x50 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x50 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x50 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x50 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x54 "ICR21,Interrupt Control Register 21" eventfld.long 0x54 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x54 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x54 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x54 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x58 "ICR22,Interrupt Control Register 22" eventfld.long 0x58 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x58 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x58 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x58 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x5C "ICR23,Interrupt Control Register 23" eventfld.long 0x5C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x5C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x5C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x5C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x60 "ICR24,Interrupt Control Register 24" eventfld.long 0x60 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x60 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x60 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x60 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x64 "ICR25,Interrupt Control Register 25" eventfld.long 0x64 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x64 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x64 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x64 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x68 "ICR26,Interrupt Control Register 26" eventfld.long 0x68 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x68 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x68 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x68 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x6C "ICR27,Interrupt Control Register 27" eventfld.long 0x6C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x6C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x6C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x6C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x70 "ICR28,Interrupt Control Register 28" eventfld.long 0x70 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x70 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x70 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x70 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x74 "ICR29,Interrupt Control Register 29" eventfld.long 0x74 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x74 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x74 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x74 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x78 "ICR30,Interrupt Control Register 30" eventfld.long 0x78 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x78 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x78 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x78 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x7C "ICR31,Interrupt Control Register 31" eventfld.long 0x7C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x7C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x7C 20. "IRQS,Interrupt Select" "0: Interrupt/trigger output/DMA request 0.,1: Interrupt/trigger output/DMA request 1." hexmask.long.byte 0x7C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x80 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x80 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x80 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." line.long 0x84 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x84 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x84 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x120)++0x3 line.long 0x0 "ISFR[$1],Interrupt Status Flag Register" eventfld.long 0x0 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." repeat.end tree.end tree "AON_ROMCP" base ad:0x44430000 repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB4)++0x3 line.long 0x0 "ROMPATCHD$1,Data Registers" hexmask.long 0x0 0.--31. 1. "DATAX,Data Fix Registers" repeat.end group.long 0xF4++0x3 line.long 0x0 "ROMPATCHCNTL,Control Register" bitfld.long 0x0 29. "DIS,Patch Disable" "0: Does not affect any Patch operations (default),1: Disables all Patch operations: data fixing and.." bitfld.long 0x0 15. "DATAFIX15,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 14. "DATAFIX14,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 13. "DATAFIX13,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 12. "DATAFIX12,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 11. "DATAFIX11,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 10. "DATAFIX10,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 9. "DATAFIX9,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 8. "DATAFIX8,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 7. "DATAFIX7,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 6. "DATAFIX6,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 5. "DATAFIX5,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 4. "DATAFIX4,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 3. "DATAFIX3,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 2. "DATAFIX2,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 1. "DATAFIX1,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 0. "DATAFIX0,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" rgroup.long 0xF8++0x3 line.long 0x0 "ROMPATCHENH,Enable Register High" group.long 0xFC++0x3 line.long 0x0 "ROMPATCHENL,Enable Register Low" hexmask.long 0x0 0.--31. 1. "ENABLE,Enable Address Comparator" repeat 32. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "ROMPATCHA[$1],Address Registers" hexmask.long.tbyte 0x0 1.--22. 1. "ADDRX,Address Comparator Registers" bitfld.long 0x0 0. "THUMBX,THUMB Comparator Select" "0: ARM patch,1: THUMB patch (ignore if a data fix)" repeat.end group.long 0x208++0x3 line.long 0x0 "ROMPATCHSR,Status Register" eventfld.long 0x0 17. "SW,ROMCP AHB Multiple Address Comparator Match Indicator" "0: No event or comparator collisions have occurred,1: A collision has occurred" hexmask.long.byte 0x0 0.--5. 1. "SOURCE,ROMCP Source Number" tree.end tree "AON_SAI" base ad:0x443B0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--19. 1. "FRAME,Frame Size" hexmask.long.byte 0x4 8.--11. 1. "FIFO,FIFO Size" newline hexmask.long.byte 0x4 0.--3. 1. "DATALINE,Number of Datalinks" group.long 0x8++0x17 line.long 0x0 "TCSR,Transmit Control" bitfld.long 0x0 31. "TE,Transmitter Enable" "0: Transmitter is disabled.,1: Transmitter is enabled or transmitter has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode.,1: Transmitter enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled.,1: Transmit bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected.,1: Transmit underrun detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty.,1: Enabled transmit FIFO is empty." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached.,1: Transmit FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA warning.,1: Enables the DMA warning." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "TCR1,Transmit Configuration 1" hexmask.long.byte 0x4 0.--4. 1. "TFW,Transmit FIFO Watermark" line.long 0x8 "TCR2,Transmit Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "TCR3,Transmit Configuration 3" bitfld.long 0xC 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0xC 16.--17. "TCE,Transmit Channel Enable" "0,1,2,3" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "TCR4,Transmit Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO reads (from..,2: FIFO Combine mode enabled on FIFO writes (by..,3: FIFO Combine mode enabled on FIFO reads (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled.,?,2: 8-bit FIFO packing is enabled.,3: 16-bit FIFO packing is enabled." hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are 3-stated when..,1: Output mode transmit data pins are never.." newline bitfld.long 0x10 4. "MF,MSB First" "0: LSB is transmitted first.,1: MSB is transmitted first." bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." newline bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." newline bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave mode.,1: Frame sync is generated internally in Master mode." line.long 0x14 "TCR5,Transmit Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x20)++0x3 line.long 0x0 "TDR[$1],Transmit Data" hexmask.long 0x0 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x40)++0x3 line.long 0x0 "TFR[$1],Transmit FIFO" bitfld.long 0x0 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO Combine mode is enabled for FIFO writes and.." hexmask.long.byte 0x0 16.--21. 1. "WFP,Write FIFO Pointer" newline hexmask.long.byte 0x0 0.--5. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0x60++0x3 line.long 0x0 "TMR,Transmit Mask" hexmask.long 0x0 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x3 line.long 0x0 "TTCR,Transmit Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the receive..,2: Timestamp counter increments when the transmit..,3: Timestamp counter increments when the receive.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0x74++0xB line.long 0x0 "TTSR,Transmit Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "TBCR,Transmit Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x17 line.long 0x0 "RCSR,Receive Control" bitfld.long 0x0 31. "RE,Receiver Enable" "0: Receiver is disabled.,1: Receiver is enabled or receiver has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode.,1: Receiver enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled.,1: Receive bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect.,1: Software reset." newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected.,1: Receive overflow detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full.,1: Enabled receive FIFO is full." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached.,1: Receive FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables DMA warnings.,1: Enables DMA warnings." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "RCR1,Receive Configuration 1" hexmask.long.byte 0x4 0.--4. 1. "RFW,Receive FIFO Watermark" line.long 0x8 "RCR2,Receive Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "RCR3,Receive Configuration 3" bitfld.long 0xC 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0xC 16.--17. "RCE,Receive Channel Enable" "0,1,2,3" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "RCR4,Receive Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO writes (from..,2: FIFO Combine mode enabled on FIFO reads (by..,3: FIFO Combine mode enabled on FIFO writes (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame Size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 4. "MF,MSB First" "0: LSB is received first.,1: MSB is received first." newline bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." newline bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave mode.,1: Frame Sync is generated internally in Master mode." line.long 0x14 "RCR5,Receive Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xA0)++0x3 line.long 0x0 "RDR[$1],Receive Data" hexmask.long 0x0 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xC0)++0x3 line.long 0x0 "RFR[$1],Receive FIFO" hexmask.long.byte 0x0 16.--21. 1. "WFP,Write FIFO Pointer" bitfld.long 0x0 15. "RCP,Receive Channel Pointer" "0: No effect.,1: FIFO Combine mode is enabled for FIFO reads and.." newline hexmask.long.byte 0x0 0.--5. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0xE0++0x3 line.long 0x0 "RMR,Receive Mask" hexmask.long 0x0 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x3 line.long 0x0 "RTCR,Receive Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the transmit..,2: Timestamp counter increments when the receive..,3: Timestamp counter increments when the transmit.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0xF4++0xB line.long 0x0 "RTSR,Receive Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "RBCR,Receive Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x100++0x3 line.long 0x0 "MCR,MCLK Control" bitfld.long 0x0 30. "MOE,MCLK Output Enable" "0: MCLK signal pin is an input.,1: MCLK signal pin is an output." bitfld.long 0x0 24.--25. "MSEL,MCLK Select" "0: Master Clock (MCLK) 1 option selected.,?,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x0 23. "DIVEN,MCLK Post Divide Enable" "0: Output on MCLK signal pin is the audio master..,1: Output on MCLK signal pin is a post-divided.." hexmask.long.byte 0x0 0.--7. 1. "DIV,MCLK Post Divide" tree.end tree "AON_SEMA42" base ad:0x44260000 group.byte 0x0++0x3F line.byte 0x0 "GATE3,Gate" hexmask.byte 0x0 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1 "GATE2,Gate" hexmask.byte 0x1 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2 "GATE1,Gate" hexmask.byte 0x2 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3 "GATE0,Gate" hexmask.byte 0x3 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x4 "GATE7,Gate" hexmask.byte 0x4 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x5 "GATE6,Gate" hexmask.byte 0x5 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x6 "GATE5,Gate" hexmask.byte 0x6 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x7 "GATE4,Gate" hexmask.byte 0x7 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x8 "GATE11,Gate" hexmask.byte 0x8 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x9 "GATE10,Gate" hexmask.byte 0x9 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xA "GATE9,Gate" hexmask.byte 0xA 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xB "GATE8,Gate" hexmask.byte 0xB 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xC "GATE15,Gate" hexmask.byte 0xC 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xD "GATE14,Gate" hexmask.byte 0xD 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xE "GATE13,Gate" hexmask.byte 0xE 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xF "GATE12,Gate" hexmask.byte 0xF 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x10 "GATE19,Gate" hexmask.byte 0x10 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x11 "GATE18,Gate" hexmask.byte 0x11 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x12 "GATE17,Gate" hexmask.byte 0x12 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x13 "GATE16,Gate" hexmask.byte 0x13 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x14 "GATE23,Gate" hexmask.byte 0x14 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x15 "GATE22,Gate" hexmask.byte 0x15 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x16 "GATE21,Gate" hexmask.byte 0x16 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x17 "GATE20,Gate" hexmask.byte 0x17 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x18 "GATE27,Gate" hexmask.byte 0x18 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x19 "GATE26,Gate" hexmask.byte 0x19 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1A "GATE25,Gate" hexmask.byte 0x1A 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1B "GATE24,Gate" hexmask.byte 0x1B 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1C "GATE31,Gate" hexmask.byte 0x1C 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1D "GATE30,Gate" hexmask.byte 0x1D 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1E "GATE29,Gate" hexmask.byte 0x1E 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1F "GATE28,Gate" hexmask.byte 0x1F 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x20 "GATE35,Gate" hexmask.byte 0x20 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x21 "GATE34,Gate" hexmask.byte 0x21 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x22 "GATE33,Gate" hexmask.byte 0x22 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x23 "GATE32,Gate" hexmask.byte 0x23 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x24 "GATE39,Gate" hexmask.byte 0x24 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x25 "GATE38,Gate" hexmask.byte 0x25 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x26 "GATE37,Gate" hexmask.byte 0x26 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x27 "GATE36,Gate" hexmask.byte 0x27 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x28 "GATE43,Gate" hexmask.byte 0x28 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x29 "GATE42,Gate" hexmask.byte 0x29 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2A "GATE41,Gate" hexmask.byte 0x2A 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2B "GATE40,Gate" hexmask.byte 0x2B 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2C "GATE47,Gate" hexmask.byte 0x2C 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2D "GATE46,Gate" hexmask.byte 0x2D 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2E "GATE45,Gate" hexmask.byte 0x2E 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2F "GATE44,Gate" hexmask.byte 0x2F 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x30 "GATE51,Gate" hexmask.byte 0x30 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x31 "GATE50,Gate" hexmask.byte 0x31 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x32 "GATE49,Gate" hexmask.byte 0x32 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x33 "GATE48,Gate" hexmask.byte 0x33 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x34 "GATE55,Gate" hexmask.byte 0x34 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x35 "GATE54,Gate" hexmask.byte 0x35 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x36 "GATE53,Gate" hexmask.byte 0x36 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x37 "GATE52,Gate" hexmask.byte 0x37 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x38 "GATE59,Gate" hexmask.byte 0x38 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x39 "GATE58,Gate" hexmask.byte 0x39 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3A "GATE57,Gate" hexmask.byte 0x3A 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3B "GATE56,Gate" hexmask.byte 0x3B 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3C "GATE63,Gate" hexmask.byte 0x3C 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3D "GATE62,Gate" hexmask.byte 0x3D 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3E "GATE61,Gate" hexmask.byte 0x3E 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3F "GATE60,Gate" hexmask.byte 0x3F 0.--3. 1. "GTFSM,Gate Finite State Machine" rgroup.word 0x42++0x1 line.word 0x0 "RSTGT_R,Reset Gate Read" bitfld.word 0x0 12.--13. "RSTGSM,Reset Gate Finite State Machine" "0: Idle waiting for the first data pattern write.,1: Waiting for the second data pattern write,2: The 2-write sequence has completed. Generate the..,?" hexmask.word.byte 0x0 8.--11. 1. "RSTGMS,Reset Gate Domain" hexmask.word.byte 0x0 0.--7. 1. "RSTGTN,Reset Gate Number" wgroup.word 0x42++0x1 line.word 0x0 "RSTGT_W,Reset Gate Write" hexmask.word.byte 0x0 8.--15. 1. "RSTGDP,Reset Gate Data Pattern" hexmask.word.byte 0x0 0.--7. 1. "RSTGTN,Reset Gate Number" tree.end tree "AON_SYSPM" tree "M33_PCF" base ad:0x443E0000 repeat 2. (list 0x0 0x1)(list ad:0x443E0000 ad:0x443E0100) tree "PMCR[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "PMCR,Performance Monitor Control" hexmask.long.byte 0x0 25.--31. 1. "SELEVT3,Select Event 3" hexmask.long.byte 0x0 18.--24. 1. "SELEVT2,Select Event 2" hexmask.long.byte 0x0 11.--17. 1. "SELEVT1,Select Event 1" bitfld.long 0x0 10. "RECTR3,Reset Event Counter 3" "0: Run normally,1: Reset" newline bitfld.long 0x0 9. "RECTR2,Reset Event Counter 2" "0: Run normally,1: Reset" bitfld.long 0x0 8. "RECTR1,Reset Event Counter 1" "0: Run normally,1: Reset" bitfld.long 0x0 7. "RICTR,Reset Instruction Counter" "0: Do not reset,1: Clear" bitfld.long 0x0 6. "DCIFSH,Disable Counters if Stopped or Halted" "0: Continue,1: Stop" newline bitfld.long 0x0 4.--5. "CMODE,Count Mode" "0: Counted in both User and Privileged modes,?,2: Counted only in User mode,3: Counted only in Privileged mode" bitfld.long 0x0 1.--3. "SSC,Start and Stop Control" "0: Idle or no-op,1: Local stop,2: Local start,3: Local start,?,?,?,?" rbitfld.long 0x0 0. "MENB,Module Is Enabled" "0: Disabled,1: Enabled" rgroup.byte ($2+0x10)++0x0 line.byte 0x0 "PMICTR_HI_,Performance Monitor Instruction Counter" hexmask.byte 0x0 0.--7. 1. "ICTR,Instruction Counter" rgroup.long ($2+0x14)++0x3 line.long 0x0 "PMICTR_LO_,Performance Monitor Instruction Counter" hexmask.long 0x0 0.--31. 1. "ICTR,Instruction Counter" repeat 3. (list 0x0 0x1 0x2)(list 0x18 0x20 0x28) tree "PMECTR[$1]" rgroup.byte ($2)++0x0 line.byte 0x0 "PMECTR_HI_,Performance Monitor Event Counter" hexmask.byte 0x0 0.--7. 1. "ECTR,Event Counter" rgroup.long ($2+0x4)++0x3 line.long 0x0 "PMECTR_LO_,Performance Monitor Event Counter" hexmask.long 0x0 0.--31. 1. "ECTR,Event Counter" tree.end repeat.end tree.end repeat.end tree.end tree "M33_PSF1" base ad:0x443F0000 repeat 2. (list 0x0 0x1)(list ad:0x443F0000 ad:0x443F0100) tree "PMCR[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "PMCR,Performance Monitor Control" hexmask.long.byte 0x0 25.--31. 1. "SELEVT3,Select Event 3" hexmask.long.byte 0x0 18.--24. 1. "SELEVT2,Select Event 2" hexmask.long.byte 0x0 11.--17. 1. "SELEVT1,Select Event 1" bitfld.long 0x0 10. "RECTR3,Reset Event Counter 3" "0: Run normally,1: Reset" newline bitfld.long 0x0 9. "RECTR2,Reset Event Counter 2" "0: Run normally,1: Reset" bitfld.long 0x0 8. "RECTR1,Reset Event Counter 1" "0: Run normally,1: Reset" bitfld.long 0x0 7. "RICTR,Reset Instruction Counter" "0: Do not reset,1: Clear" bitfld.long 0x0 6. "DCIFSH,Disable Counters if Stopped or Halted" "0: Continue,1: Stop" newline bitfld.long 0x0 4.--5. "CMODE,Count Mode" "0: Counted in both User and Privileged modes,?,2: Counted only in User mode,3: Counted only in Privileged mode" bitfld.long 0x0 1.--3. "SSC,Start and Stop Control" "0: Idle or no-op,1: Local stop,2: Local start,3: Local start,?,?,?,?" rbitfld.long 0x0 0. "MENB,Module Is Enabled" "0: Disabled,1: Enabled" rgroup.byte ($2+0x10)++0x0 line.byte 0x0 "PMICTR_HI_,Performance Monitor Instruction Counter" hexmask.byte 0x0 0.--7. 1. "ICTR,Instruction Counter" rgroup.long ($2+0x14)++0x3 line.long 0x0 "PMICTR_LO_,Performance Monitor Instruction Counter" hexmask.long 0x0 0.--31. 1. "ICTR,Instruction Counter" repeat 3. (list 0x0 0x1 0x2)(list 0x18 0x20 0x28) tree "PMECTR[$1]" rgroup.byte ($2)++0x0 line.byte 0x0 "PMECTR_HI_,Performance Monitor Event Counter" hexmask.byte 0x0 0.--7. 1. "ECTR,Event Counter" rgroup.long ($2+0x4)++0x3 line.long 0x0 "PMECTR_LO_,Performance Monitor Event Counter" hexmask.long 0x0 0.--31. 1. "ECTR,Event Counter" tree.end repeat.end tree.end repeat.end tree.end tree.end tree "AON_TCU" base ad:0x444B0000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0x600++0x3 line.long 0x0 "tcu_mtr_mct_access_,MCT Test Mode CTRL Reg" bitfld.long 0x0 2. "mct_launch_crep,Signal in the MCT used to calculate repair while running the BIST incase of any failure" "0,1" bitfld.long 0x0 1. "mct_launch_bist_start,Signal in the MCT that is basically used to start all the BIST's selected through mct_launch_bistsel registers" "0,1" bitfld.long 0x0 0. "mct_test_mode,For using MCT test mode through the TCU this bit has to be set first which enables all the muxes related to this test mode" "0,1" group.long 0x610++0x7 line.long 0x0 "tcu_mtr_mct_access__mct_launch_algosel0,MCT Launch ALGOSEL0 Reg" hexmask.long 0x0 0.--31. 1. "out,Select the required algorithm" line.long 0x4 "tcu_mtr_mct_access__mct_launch_algosel1,MCT Launch ALGOSEL1 Reg" hexmask.long 0x4 0.--31. 1. "out,Select the required algorithm" group.long 0x620++0xF line.long 0x0 "tcu_mtr_mct_access__mct_launch_bistsel0,MCT Launch BISTSEL0 Reg" hexmask.long 0x0 0.--31. 1. "out,Selects BIST's [31:0] that will be run" line.long 0x4 "tcu_mtr_mct_access__mct_launch_bistsel1,MCT Launch BISTSEL1 Reg" hexmask.long 0x4 0.--31. 1. "out,Selects BIST's [63:32] that will be run" line.long 0x8 "tcu_mtr_mct_access__mct_launch_bistsel2,MCT Launch BISTSEL2 Reg" hexmask.long 0x8 0.--31. 1. "out,Selects BIST's [95:64] that will be run" line.long 0xC "tcu_mtr_mct_access__mct_launch_bistsel3,MCT Launch BISTSEL2 Reg" hexmask.long 0xC 0.--31. 1. "out,Selects BIST's [127:96] that will be run" group.long 0x650++0x3 line.long 0x0 "tcu_mtr_direct_bist_access_,Direct BIST Access CTRL Reg" bitfld.long 0x0 2. "bist_burnin_loop_start,start burnin BIST signal" "0,1" bitfld.long 0x0 1. "bist_burnin_loop_mode,Test mode bit to qualify the BIST start in Burn-in mode" "0,1" bitfld.long 0x0 0. "bist_mode,bist mode indication" "0,1" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" tree.end sif (cpuis("IMX95")||cpuis("IMX95-CM33")) tree "AON_TRDC_MGR" base ad:0x44270000 group.long 0x0++0x3 line.long 0x0 "TRDC_CR,TRDC Register" bitfld.long 0x0 30. "LK1,Lock Status" "0: The CR can be written by any secure privileged..,1: The CR is locked (read-only) until the next reset." newline bitfld.long 0x0 15. "GVLDR,Global Valid for Memory Region Checkers" "0: TRDC MRCs are disabled.,1: TRDC MRCs are enabled." newline bitfld.long 0x0 14. "GVLDB,Global Valid for Memory Block Checkers" "0: TRDC MBCs are disabled.,1: TRDC MBCs are enabled." newline hexmask.long.byte 0x0 1.--4. 1. "HRL,Hardware Revision Level" newline bitfld.long 0x0 0. "GVLDM,Global Valid for Domain Assignment Controllers" "0: TRDC DACs are disabled.,1: TRDC DACs are enabled." rgroup.long 0xF0++0xF line.long 0x0 "TRDC_HWCFG0,TRDC Hardware Configuration Register 0" bitfld.long 0x0 29.--31. "MID,Module ID" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 24.--28. 1. "NMRC,Number of MRCs" newline hexmask.long.byte 0x0 16.--19. 1. "NMBC,Number of MBCs" newline hexmask.long.byte 0x0 8.--15. 1. "NMSTR,Number of bus masters" newline hexmask.long.byte 0x0 0.--4. 1. "NDID,Number of domains" line.long 0x4 "TRDC_HWCFG1,TRDC Hardware Configuration Register 1" hexmask.long.byte 0x4 0.--3. 1. "DID,Domain identifier number" line.long 0x8 "TRDC_HWCFG2,TRDC Hardware Configuration Register 2" hexmask.long 0x8 0.--31. 1. "PIDPn,Process identifier present" line.long 0xC "TRDC_HWCFG3,TRDC Hardware Configuration Register 3" hexmask.long 0xC 0.--31. 1. "PIDPn,Process identifier present" rgroup.byte 0x100++0x27 line.byte 0x0 "DACFG0,Domain Assignment Configuration Register" bitfld.byte 0x0 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x0 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1 "DACFG1,Domain Assignment Configuration Register" bitfld.byte 0x1 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x2 "DACFG2,Domain Assignment Configuration Register" bitfld.byte 0x2 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x2 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x3 "DACFG3,Domain Assignment Configuration Register" bitfld.byte 0x3 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x3 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x4 "DACFG4,Domain Assignment Configuration Register" bitfld.byte 0x4 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x4 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x5 "DACFG5,Domain Assignment Configuration Register" bitfld.byte 0x5 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x5 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x6 "DACFG6,Domain Assignment Configuration Register" bitfld.byte 0x6 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x6 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x7 "DACFG7,Domain Assignment Configuration Register" bitfld.byte 0x7 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x7 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x8 "DACFG8,Domain Assignment Configuration Register" bitfld.byte 0x8 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x8 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x9 "DACFG9,Domain Assignment Configuration Register" bitfld.byte 0x9 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x9 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0xA "DACFG10,Domain Assignment Configuration Register" bitfld.byte 0xA 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0xA 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0xB "DACFG11,Domain Assignment Configuration Register" bitfld.byte 0xB 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0xB 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0xC "DACFG12,Domain Assignment Configuration Register" bitfld.byte 0xC 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0xC 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0xD "DACFG13,Domain Assignment Configuration Register" bitfld.byte 0xD 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0xD 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0xE "DACFG14,Domain Assignment Configuration Register" bitfld.byte 0xE 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0xE 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0xF "DACFG15,Domain Assignment Configuration Register" bitfld.byte 0xF 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0xF 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x10 "DACFG16,Domain Assignment Configuration Register" bitfld.byte 0x10 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x10 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x11 "DACFG17,Domain Assignment Configuration Register" bitfld.byte 0x11 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x11 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x12 "DACFG18,Domain Assignment Configuration Register" bitfld.byte 0x12 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x12 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x13 "DACFG19,Domain Assignment Configuration Register" bitfld.byte 0x13 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x13 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x14 "DACFG20,Domain Assignment Configuration Register" bitfld.byte 0x14 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x14 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x15 "DACFG21,Domain Assignment Configuration Register" bitfld.byte 0x15 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x15 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x16 "DACFG22,Domain Assignment Configuration Register" bitfld.byte 0x16 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x16 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x17 "DACFG23,Domain Assignment Configuration Register" bitfld.byte 0x17 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x17 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x18 "DACFG24,Domain Assignment Configuration Register" bitfld.byte 0x18 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x18 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x19 "DACFG25,Domain Assignment Configuration Register" bitfld.byte 0x19 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x19 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1A "DACFG26,Domain Assignment Configuration Register" bitfld.byte 0x1A 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1A 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1B "DACFG27,Domain Assignment Configuration Register" bitfld.byte 0x1B 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1B 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1C "DACFG28,Domain Assignment Configuration Register" bitfld.byte 0x1C 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1C 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1D "DACFG29,Domain Assignment Configuration Register" bitfld.byte 0x1D 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1D 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1E "DACFG30,Domain Assignment Configuration Register" bitfld.byte 0x1E 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1E 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x1F "DACFG31,Domain Assignment Configuration Register" bitfld.byte 0x1F 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x1F 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x20 "DACFG32,Domain Assignment Configuration Register" bitfld.byte 0x20 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x20 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x21 "DACFG33,Domain Assignment Configuration Register" bitfld.byte 0x21 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x21 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x22 "DACFG34,Domain Assignment Configuration Register" bitfld.byte 0x22 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x22 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x23 "DACFG35,Domain Assignment Configuration Register" bitfld.byte 0x23 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x23 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x24 "DACFG36,Domain Assignment Configuration Register" bitfld.byte 0x24 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x24 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x25 "DACFG37,Domain Assignment Configuration Register" bitfld.byte 0x25 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x25 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x26 "DACFG38,Domain Assignment Configuration Register" bitfld.byte 0x26 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x26 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" line.byte 0x27 "DACFG39,Domain Assignment Configuration Register" bitfld.byte 0x27 7. "NCM,Non-CPU Master" "0: Bus master is a processor.,1: Bus master is a non-processor." newline hexmask.byte 0x27 0.--3. 1. "NMDAR,Number of master domain assignment registers for bus master m" group.long 0x1C0++0x3 line.long 0x0 "TRDC_IDAU_CR,TRDC IDAU Control Register" rbitfld.long 0x0 31. "PCURRNS,Processor current security" "0: Processor is in Secure state,1: Processor is in Nonsecure state" newline bitfld.long 0x0 12. "LKSAU,Lock SAU" "0: Unlock these registers,1: Disable writes to the SAU_CTRL SAU_RNR SAU_RBAR.." newline bitfld.long 0x0 11. "LKNSMPU,Lock Nonsecure MPU" "0: Unlock these registers,1: Disable writes to the MPU_CTRL_NS MPU_RNR_NS.." newline bitfld.long 0x0 10. "LKSMPU,Lock Secure MPU" "0: Unlock these registers,1: Disable writes to the MPU_CTRL MPU_RNR MPU_RBAR.." newline bitfld.long 0x0 9. "LKNSVTOR,Lock Nonsecure Vector Table Offset Register" "0: Unlock this register,1: Disable writes to the VTOR_NS register" newline bitfld.long 0x0 8. "LKSVTAIRCR,Lock Secure VTOR Application interrupt and Reset Control Registers" "0: Unlock these registers,1: Disable writes to the VTOR_S AIRCR[PRIS] and.." newline rbitfld.long 0x0 6. "SAUDIS,Security Attribution Unit Disable" "0: SAU is enabled,1: SAU is disabled" newline rbitfld.long 0x0 5. "MPUNSDIS,NonSecure Memory Protection Unit Disabled" "0: Nonsecure MPU is enabled,1: Nonsecure MPU is disabled" newline rbitfld.long 0x0 4. "MPUSDIS,Secure Memory Protection Unit Disabled" "0: Secure MPU is enabled,1: Secure MPU is disabled" newline rbitfld.long 0x0 3. "CFGSECEXT,Configure Security Extension" "0: ARMv8M Security Extension is disabled,1: ARMv8-M Security Extension is enabled" newline bitfld.long 0x0 0. "VLD,Valid" "0,1" group.long 0x1E0++0x3 line.long 0x0 "TRDC_FLW_CTL,TRDC FLW Control" bitfld.long 0x0 31. "V,Valid bit" "0: FLW function is disabled.,1: FLW function is enabled." newline bitfld.long 0x0 30. "LK,Lock bit" "0: FLW registers may be modified.,1: FLW registers are locked until the next reset." rgroup.long 0x1E4++0x3 line.long 0x0 "TRDC_FLW_PBASE,TRDC FLW Physical Base" hexmask.long 0x0 0.--31. 1. "PBASE,Physical base address" group.long 0x1E8++0x7 line.long 0x0 "TRDC_FLW_ABASE,TRDC FLW Array Base" hexmask.long.word 0x0 22.--31. 1. "ABASE_H,Array base address high" newline hexmask.long.byte 0x0 15.--21. 1. "ABASE_L,Array base address low" line.long 0x4 "TRDC_FLW_BCNT,TRDC FLW Block Count" hexmask.long.word 0x4 0.--14. 1. "BCNT,Block Count" group.long 0x1FC++0x3 line.long 0x0 "TRDC_FDID,TRDC Fault Domain ID" hexmask.long.byte 0x0 0.--3. 1. "FDID,Domain ID of Faulted Access" repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x200)++0x3 line.long 0x0 "TRDC_DERRLOC[$1],TRDC Domain Error Location Register" hexmask.long.word 0x0 16.--31. 1. "MRCINST,MRC instance" newline hexmask.long.byte 0x0 0.--7. 1. "MBCINST,MBC instance" repeat.end rgroup.long 0x400++0x7 line.long 0x0 "MBC0_DERR_W0,MBC Domain Error Word0 Register" hexmask.long 0x0 0.--31. 1. "EADDR,Error address" line.long 0x4 "MBC0_DERR_W1,MBC Domain Error Word1 Register" bitfld.long 0x4 30.--31. "EST,Error state" "0: No access violation has been detected.,1: No access violation has been detected.,2: A single access violation has been detected.,3: Multiple access violations for this domain have.." newline bitfld.long 0x4 24.--26. "EPORT,Error port" "0: mbcxslv0,1: mbcxslv1,2: mbcxslv2,3: mbcxslv3,?,?,?,?" newline bitfld.long 0x4 11. "ERW,Error read/write" "0: Read access,1: Write access" newline bitfld.long 0x4 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access.,1: Secure user mode data access.,2: Secure privileged mode instruction fetch access.,3: Secure privileged mode data access.,4: Nonsecure user mode instruction fetch access.,5: Nonsecure user mode data access.,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access." newline hexmask.long.byte 0x4 0.--3. 1. "EDID,Error domain identifier" group.long 0x40C++0x3 line.long 0x0 "MBC0_DERR_W3,MBC Domain Error Word3 Register" bitfld.long 0x0 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x410++0x7 line.long 0x0 "MBC1_DERR_W0,MBC Domain Error Word0 Register" hexmask.long 0x0 0.--31. 1. "EADDR,Error address" line.long 0x4 "MBC1_DERR_W1,MBC Domain Error Word1 Register" bitfld.long 0x4 30.--31. "EST,Error state" "0: No access violation has been detected.,1: No access violation has been detected.,2: A single access violation has been detected.,3: Multiple access violations for this domain have.." newline bitfld.long 0x4 24.--26. "EPORT,Error port" "0: mbcxslv0,1: mbcxslv1,2: mbcxslv2,3: mbcxslv3,?,?,?,?" newline bitfld.long 0x4 11. "ERW,Error read/write" "0: Read access,1: Write access" newline bitfld.long 0x4 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access.,1: Secure user mode data access.,2: Secure privileged mode instruction fetch access.,3: Secure privileged mode data access.,4: Nonsecure user mode instruction fetch access.,5: Nonsecure user mode data access.,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access." newline hexmask.long.byte 0x4 0.--3. 1. "EDID,Error domain identifier" group.long 0x41C++0x3 line.long 0x0 "MBC1_DERR_W3,MBC Domain Error Word3 Register" bitfld.long 0x0 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x480++0x7 line.long 0x0 "MRC0_DERR_W0,MRC Domain Error Word0 Register" hexmask.long 0x0 0.--31. 1. "EADDR,Error address" line.long 0x4 "MRC0_DERR_W1,MRC Domain Error Word1 Register" bitfld.long 0x4 30.--31. "EST,Error state" "0: No access violation has been detected.,1: No access violation has been detected.,2: A single access violation has been detected.,3: Multiple access violations for this domain have.." newline bitfld.long 0x4 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 11. "ERW,Error read/write" "0: Read access,1: Write access" newline bitfld.long 0x4 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access.,1: Secure user mode data access.,2: Secure privileged mode instruction fetch access.,3: Secure privileged mode data access.,4: Nonsecure user mode instruction fetch access.,5: Nonsecure user mode data access.,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access." newline hexmask.long.byte 0x4 0.--3. 1. "EDID,Error domain identifier" group.long 0x48C++0x3 line.long 0x0 "MRC0_DERR_W3,MRC Domain Error Word3 Register" bitfld.long 0x0 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" group.long 0x800++0x3 line.long 0x0 "MDA_W0_0_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x820++0x3 line.long 0x0 "MDA_W0_1_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x840++0x3 line.long 0x0 "MDA_W0_2_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x860++0x3 line.long 0x0 "MDA_W0_3_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x880++0x3 line.long 0x0 "MDA_W0_4_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x8A0++0x3 line.long 0x0 "MDA_W0_5_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x8C0++0x3 line.long 0x0 "MDA_W0_6_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x8E0++0x3 line.long 0x0 "MDA_W0_7_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x900++0x3 line.long 0x0 "MDA_W0_8_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x920++0x3 line.long 0x0 "MDA_W0_9_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x940++0x3 line.long 0x0 "MDA_W0_10_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x960++0x3 line.long 0x0 "MDA_W0_11_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x980++0x3 line.long 0x0 "MDA_W0_12_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x9A0++0x3 line.long 0x0 "MDA_W0_13_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x9C0++0x3 line.long 0x0 "MDA_W0_14_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0x9E0++0x3 line.long 0x0 "MDA_W0_15_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xA00++0xB line.long 0x0 "MDA_W0_16_DFMT0,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 14.--15. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "DIDS,DID Select" "0: Use MDAm[3:0] as the domain identifier.,1: Use the input DID as the domain identifier.,2: Use MDAm[3:2] concatenated with the low-order 2..,?" newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" line.long 0x4 "MDA_W1_16_DFMT0,DAC Master Domain Assignment Register" bitfld.long 0x4 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x4 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x4 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x4 14.--15. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x4 4.--5. "DIDS,DID Select" "0: Use MDAm[3:0] as the domain identifier.,1: Use the input DID as the domain identifier.,2: Use MDAm[3:2] concatenated with the low-order 2..,?" newline hexmask.long.byte 0x4 0.--3. 1. "DID,Domain identifier" line.long 0x8 "MDA_W2_16_DFMT0,DAC Master Domain Assignment Register" bitfld.long 0x8 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x8 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x8 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x8 14.--15. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x8 4.--5. "DIDS,DID Select" "0: Use MDAm[3:0] as the domain identifier.,1: Use the input DID as the domain identifier.,2: Use MDAm[3:2] concatenated with the low-order 2..,?" newline hexmask.long.byte 0x8 0.--3. 1. "DID,Domain identifier" group.long 0xA20++0x3 line.long 0x0 "MDA_W0_17_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xA40++0x3 line.long 0x0 "MDA_W0_18_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xA60++0x3 line.long 0x0 "MDA_W0_19_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xA80++0x3 line.long 0x0 "MDA_W0_20_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xAA0++0x3 line.long 0x0 "MDA_W0_21_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xAC0++0x3 line.long 0x0 "MDA_W0_22_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xAE0++0x3 line.long 0x0 "MDA_W0_23_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xB00++0x3 line.long 0x0 "MDA_W0_24_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xB20++0x3 line.long 0x0 "MDA_W0_25_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xB40++0x3 line.long 0x0 "MDA_W0_26_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xB60++0x3 line.long 0x0 "MDA_W0_27_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xB80++0x3 line.long 0x0 "MDA_W0_28_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xBA0++0x3 line.long 0x0 "MDA_W0_29_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xBC0++0x3 line.long 0x0 "MDA_W0_30_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xBE0++0x3 line.long 0x0 "MDA_W0_31_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xC00++0x3 line.long 0x0 "MDA_W0_32_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xC20++0x3 line.long 0x0 "MDA_W0_33_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xC40++0x3 line.long 0x0 "MDA_W0_34_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xC60++0x3 line.long 0x0 "MDA_W0_35_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xC80++0x3 line.long 0x0 "MDA_W0_36_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xCA0++0x3 line.long 0x0 "MDA_W0_37_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xCC0++0x3 line.long 0x0 "MDA_W0_38_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" group.long 0xCE0++0x3 line.long 0x0 "MDA_W0_39_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x0 31. "VLD,Valid" "0: The Wr domain assignment is invalid.,1: The Wr domain assignment is valid." newline bitfld.long 0x0 30. "LK1,1-bit Lock" "0: Register can be written by any secure privileged..,1: bit Lock" newline rbitfld.long 0x0 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" newline bitfld.long 0x0 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier.,1: Use the DID input as the domain identifier." newline bitfld.long 0x0 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to secure.,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure attribute..,3: Use the bus master's secure/nonsecure attribute.." newline bitfld.long 0x0 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user.,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user attribute..,3: Use the bus master's privileged/user attribute.." newline hexmask.long.byte 0x0 0.--3. 1. "DID,Domain identifier" rgroup.long 0x10000++0xF line.long 0x0 "MBC0_MEM0_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0x0 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0x0 0.--9. 1. "NBLKS,Number of blocks in this memory" line.long 0x4 "MBC0_MEM1_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0x4 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0x4 0.--9. 1. "NBLKS,Number of blocks in this memory" line.long 0x8 "MBC0_MEM2_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0x8 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0x8 0.--9. 1. "NBLKS,Number of blocks in this memory" line.long 0xC "MBC0_MEM3_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0xC 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0xC 0.--9. 1. "NBLKS,Number of blocks in this memory" group.long 0x10010++0x1BF line.long 0x0 "MBC0_NSE_BLK_INDEX,MBC NonSecure Enable Block Index" bitfld.long 0x0 31. "DID_SEL15,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 30. "DID_SEL14,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 29. "DID_SEL13,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 28. "DID_SEL12,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 27. "DID_SEL11,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 26. "DID_SEL10,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 25. "DID_SEL9,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 24. "DID_SEL8,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 23. "DID_SEL7,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 22. "DID_SEL6,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 21. "DID_SEL5,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 20. "DID_SEL4,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 19. "DID_SEL3,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 18. "DID_SEL2,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 17. "DID_SEL1,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 16. "DID_SEL0,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline hexmask.long.byte 0x0 8.--11. 1. "MEM_SEL,Memory Select" newline hexmask.long.byte 0x0 2.--5. 1. "WNDX,Word index into the block NSE bitmap. It selects the BLK_NSE_Wn register where WNDX determines the value of n." newline bitfld.long 0x0 0. "AI,Auto Increment" "0: No effect.,1: Add 1 to the WNDX field after the register write." line.long 0x4 "MBC0_NSE_BLK_SET,MBC NonSecure Enable Block Set" hexmask.long 0x4 0.--31. 1. "W1SET,Write-1 Set" line.long 0x8 "MBC0_NSE_BLK_CLR,MBC NonSecure Enable Block Clear" hexmask.long 0x8 0.--31. 1. "W1CLR,Write-1 Clear" line.long 0xC "MBC0_NSE_BLK_CLR_ALL,MBC NonSecure Enable Block Clear All" bitfld.long 0xC 31. "DID_SEL15,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 30. "DID_SEL14,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 29. "DID_SEL13,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 28. "DID_SEL12,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 27. "DID_SEL11,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 26. "DID_SEL10,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 25. "DID_SEL9,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 24. "DID_SEL8,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 23. "DID_SEL7,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 22. "DID_SEL6,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 21. "DID_SEL5,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 20. "DID_SEL4,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 19. "DID_SEL3,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 18. "DID_SEL2,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 17. "DID_SEL1,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 16. "DID_SEL0,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline hexmask.long.byte 0xC 8.--11. 1. "MEMSEL,Memory Select" line.long 0x10 "MBC0_MEMN_GLBAC0,MBC Global Access Control" bitfld.long 0x10 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x10 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x10 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x10 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x10 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x10 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x10 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x10 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x10 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x14 "MBC0_MEMN_GLBAC1,MBC Global Access Control" bitfld.long 0x14 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x14 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x14 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x14 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x14 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x14 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x14 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x14 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x14 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x14 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x18 "MBC0_MEMN_GLBAC2,MBC Global Access Control" bitfld.long 0x18 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x18 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x18 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x18 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x18 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x18 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x18 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x18 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x18 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x18 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x1C "MBC0_MEMN_GLBAC3,MBC Global Access Control" bitfld.long 0x1C 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x1C 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x1C 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x1C 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x1C 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x1C 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x1C 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x1C 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x1C 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x1C 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x20 "MBC0_MEMN_GLBAC4,MBC Global Access Control" bitfld.long 0x20 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x20 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x20 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x20 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x20 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x20 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x20 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x20 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x20 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x20 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x24 "MBC0_MEMN_GLBAC5,MBC Global Access Control" bitfld.long 0x24 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x24 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x24 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x24 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x24 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x24 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x24 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x24 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x24 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x24 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x28 "MBC0_MEMN_GLBAC6,MBC Global Access Control" bitfld.long 0x28 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x28 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x28 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x28 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x28 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x28 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x28 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x28 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x28 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x28 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x2C "MBC0_MEMN_GLBAC7,MBC Global Access Control" bitfld.long 0x2C 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x2C 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x2C 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x2C 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x2C 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x2C 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x2C 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x2C 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x2C 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x2C 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x30 "MBC0_DOM0_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM0_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM0_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM0_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM0_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM0_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM0_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM0_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM0_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM0_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM0_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM0_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM0_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM0_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM0_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM0_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM0_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM0_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM0_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM0_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM0_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM0_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM0_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM0_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM0_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM0_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM0_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM0_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM0_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM0_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM0_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM0_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM0_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM0_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM0_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM0_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM0_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM0_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM0_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM0_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM0_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM0_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM0_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM0_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM0_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM0_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM0_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM0_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM0_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM0_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM0_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM0_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM0_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0x100 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x104 "MBC0_DOM0_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0x104 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x108 "MBC0_DOM0_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0x108 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10C "MBC0_DOM0_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0x10C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x110 "MBC0_DOM0_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0x110 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x114 "MBC0_DOM0_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0x114 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x118 "MBC0_DOM0_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0x118 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x11C "MBC0_DOM0_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0x11C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x120 "MBC0_DOM0_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0x120 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x124 "MBC0_DOM0_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0x124 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x128 "MBC0_DOM0_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0x128 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x12C "MBC0_DOM0_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0x12C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x130 "MBC0_DOM0_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM0_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM0_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM0_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM0_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x140 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x144 "MBC0_DOM0_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x144 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x148 "MBC0_DOM0_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x148 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x14C "MBC0_DOM0_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x14C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x150 "MBC0_DOM0_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x150 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x154 "MBC0_DOM0_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x154 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x158 "MBC0_DOM0_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x158 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x15C "MBC0_DOM0_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x15C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x160 "MBC0_DOM0_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM0_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM0_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x168 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x16C "MBC0_DOM0_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x16C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x170 "MBC0_DOM0_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM0_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM0_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM0_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM0_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM0_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM0_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x188 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18C "MBC0_DOM0_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x18C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x190 "MBC0_DOM0_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x190 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x194 "MBC0_DOM0_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x194 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x198 "MBC0_DOM0_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x198 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x198 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x198 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x19C "MBC0_DOM0_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x19C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x19C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x19C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1A0 "MBC0_DOM0_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x1A0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1A4 "MBC0_DOM0_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x1A4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1A8 "MBC0_DOM0_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x1A8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1A8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1A8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1AC "MBC0_DOM0_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x1AC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1AC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1AC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1B0 "MBC0_DOM0_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x1B0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1B4 "MBC0_DOM0_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1B4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1B4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1B8 "MBC0_DOM0_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x1B8 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1B8 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x1BC "MBC0_DOM0_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x1BC 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1BC 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10240++0x18F line.long 0x0 "MBC0_DOM1_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM1_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM1_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM1_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM1_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM1_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM1_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM1_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM1_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM1_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM1_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM1_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM1_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM1_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM1_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM1_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM1_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM1_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM1_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM1_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM1_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM1_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM1_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM1_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM1_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM1_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM1_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM1_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM1_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM1_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM1_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM1_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM1_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM1_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM1_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM1_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM1_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM1_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM1_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM1_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM1_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM1_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM1_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM1_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM1_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM1_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM1_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM1_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM1_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM1_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM1_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM1_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM1_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM1_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM1_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM1_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM1_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM1_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM1_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM1_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM1_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM1_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM1_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM1_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM1_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM1_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM1_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM1_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM1_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM1_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM1_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM1_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM1_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM1_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM1_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM1_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM1_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM1_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM1_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM1_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM1_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM1_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM1_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM1_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM1_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM1_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM1_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM1_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM1_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM1_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM1_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM1_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM1_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM1_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM1_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM1_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM1_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM1_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM1_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM1_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10440++0x18F line.long 0x0 "MBC0_DOM2_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM2_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM2_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM2_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM2_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM2_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM2_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM2_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM2_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM2_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM2_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM2_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM2_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM2_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM2_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM2_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM2_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM2_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM2_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM2_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM2_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM2_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM2_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM2_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM2_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM2_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM2_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM2_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM2_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM2_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM2_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM2_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM2_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM2_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM2_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM2_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM2_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM2_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM2_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM2_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM2_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM2_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM2_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM2_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM2_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM2_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM2_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM2_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM2_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM2_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM2_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM2_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM2_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM2_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM2_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM2_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM2_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM2_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM2_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM2_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM2_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM2_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM2_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM2_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM2_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM2_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM2_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM2_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM2_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM2_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM2_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM2_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM2_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM2_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM2_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM2_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM2_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM2_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM2_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM2_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM2_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM2_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM2_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM2_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM2_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM2_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM2_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM2_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM2_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM2_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM2_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM2_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM2_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM2_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM2_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM2_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM2_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM2_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM2_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM2_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10640++0x18F line.long 0x0 "MBC0_DOM3_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM3_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM3_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM3_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM3_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM3_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM3_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM3_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM3_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM3_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM3_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM3_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM3_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM3_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM3_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM3_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM3_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM3_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM3_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM3_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM3_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM3_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM3_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM3_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM3_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM3_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM3_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM3_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM3_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM3_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM3_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM3_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM3_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM3_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM3_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM3_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM3_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM3_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM3_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM3_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM3_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM3_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM3_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM3_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM3_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM3_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM3_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM3_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM3_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM3_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM3_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM3_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM3_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM3_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM3_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM3_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM3_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM3_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM3_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM3_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM3_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM3_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM3_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM3_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM3_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM3_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM3_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM3_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM3_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM3_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM3_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM3_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM3_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM3_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM3_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM3_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM3_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM3_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM3_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM3_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM3_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM3_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM3_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM3_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM3_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM3_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM3_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM3_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM3_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM3_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM3_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM3_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM3_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM3_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM3_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM3_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM3_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM3_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM3_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM3_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10840++0x18F line.long 0x0 "MBC0_DOM4_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM4_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM4_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM4_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM4_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM4_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM4_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM4_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM4_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM4_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM4_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM4_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM4_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM4_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM4_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM4_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM4_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM4_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM4_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM4_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM4_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM4_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM4_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM4_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM4_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM4_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM4_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM4_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM4_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM4_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM4_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM4_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM4_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM4_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM4_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM4_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM4_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM4_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM4_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM4_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM4_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM4_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM4_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM4_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM4_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM4_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM4_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM4_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM4_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM4_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM4_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM4_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM4_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM4_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM4_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM4_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM4_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM4_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM4_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM4_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM4_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM4_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM4_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM4_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM4_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM4_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM4_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM4_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM4_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM4_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM4_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM4_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM4_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM4_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM4_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM4_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM4_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM4_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM4_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM4_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM4_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM4_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM4_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM4_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM4_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM4_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM4_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM4_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM4_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM4_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM4_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM4_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM4_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM4_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM4_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM4_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM4_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM4_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM4_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM4_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10A40++0x18F line.long 0x0 "MBC0_DOM5_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM5_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM5_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM5_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM5_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM5_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM5_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM5_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM5_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM5_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM5_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM5_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM5_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM5_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM5_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM5_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM5_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM5_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM5_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM5_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM5_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM5_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM5_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM5_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM5_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM5_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM5_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM5_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM5_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM5_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM5_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM5_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM5_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM5_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM5_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM5_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM5_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM5_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM5_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM5_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM5_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM5_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM5_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM5_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM5_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM5_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM5_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM5_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM5_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM5_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM5_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM5_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM5_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM5_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM5_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM5_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM5_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM5_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM5_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM5_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM5_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM5_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM5_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM5_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM5_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM5_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM5_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM5_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM5_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM5_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM5_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM5_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM5_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM5_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM5_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM5_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM5_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM5_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM5_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM5_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM5_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM5_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM5_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM5_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM5_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM5_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM5_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM5_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM5_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM5_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM5_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM5_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM5_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM5_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM5_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM5_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM5_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM5_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM5_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM5_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10C40++0x18F line.long 0x0 "MBC0_DOM6_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM6_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM6_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM6_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM6_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM6_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM6_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM6_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM6_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM6_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM6_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM6_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM6_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM6_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM6_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM6_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM6_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM6_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM6_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM6_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM6_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM6_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM6_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM6_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM6_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM6_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM6_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM6_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM6_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM6_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM6_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM6_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM6_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM6_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM6_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM6_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM6_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM6_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM6_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM6_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM6_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM6_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM6_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM6_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM6_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM6_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM6_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM6_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM6_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM6_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM6_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM6_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM6_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM6_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM6_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM6_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM6_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM6_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM6_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM6_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM6_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM6_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM6_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM6_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM6_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM6_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM6_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM6_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM6_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM6_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM6_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM6_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM6_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM6_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM6_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM6_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM6_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM6_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM6_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM6_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM6_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM6_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM6_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM6_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM6_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM6_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM6_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM6_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM6_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM6_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM6_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM6_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM6_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM6_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM6_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM6_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM6_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM6_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM6_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM6_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x10E40++0x18F line.long 0x0 "MBC0_DOM7_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM7_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM7_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM7_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM7_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM7_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM7_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM7_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM7_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM7_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM7_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM7_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM7_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM7_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM7_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM7_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM7_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM7_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM7_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM7_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM7_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM7_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM7_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM7_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM7_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM7_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM7_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM7_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM7_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM7_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM7_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM7_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM7_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM7_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM7_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM7_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM7_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM7_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM7_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM7_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM7_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM7_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM7_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM7_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM7_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM7_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM7_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM7_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM7_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM7_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM7_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM7_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM7_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM7_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM7_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM7_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM7_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM7_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM7_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM7_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM7_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM7_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM7_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM7_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM7_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM7_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM7_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM7_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM7_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM7_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM7_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM7_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM7_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM7_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM7_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM7_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM7_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM7_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM7_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM7_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM7_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM7_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM7_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM7_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM7_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM7_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM7_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM7_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM7_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM7_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM7_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM7_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM7_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM7_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM7_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM7_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM7_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM7_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM7_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM7_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11040++0x18F line.long 0x0 "MBC0_DOM8_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM8_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM8_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM8_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM8_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM8_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM8_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM8_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM8_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM8_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM8_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM8_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM8_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM8_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM8_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM8_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM8_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM8_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM8_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM8_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM8_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM8_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM8_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM8_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM8_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM8_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM8_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM8_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM8_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM8_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM8_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM8_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM8_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM8_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM8_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM8_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM8_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM8_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM8_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM8_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM8_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM8_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM8_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM8_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM8_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM8_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM8_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM8_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM8_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM8_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM8_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM8_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM8_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM8_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM8_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM8_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM8_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM8_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM8_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM8_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM8_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM8_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM8_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM8_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM8_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM8_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM8_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM8_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM8_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM8_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM8_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM8_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM8_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM8_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM8_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM8_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM8_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM8_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM8_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM8_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM8_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM8_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM8_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM8_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM8_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM8_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM8_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM8_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM8_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM8_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM8_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM8_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM8_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM8_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM8_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM8_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM8_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM8_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM8_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM8_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11240++0x18F line.long 0x0 "MBC0_DOM9_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM9_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM9_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM9_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM9_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM9_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM9_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM9_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM9_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM9_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM9_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM9_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM9_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM9_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM9_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM9_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM9_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM9_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM9_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM9_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM9_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM9_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM9_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM9_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM9_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM9_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM9_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM9_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM9_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM9_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM9_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM9_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM9_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM9_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM9_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM9_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM9_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM9_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM9_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM9_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM9_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM9_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM9_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM9_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM9_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM9_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM9_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM9_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM9_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM9_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM9_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM9_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM9_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM9_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM9_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM9_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM9_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM9_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM9_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM9_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM9_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM9_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM9_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM9_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM9_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM9_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM9_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM9_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM9_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM9_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM9_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM9_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM9_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM9_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM9_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM9_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM9_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM9_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM9_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM9_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM9_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM9_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM9_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM9_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM9_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM9_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM9_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM9_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM9_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM9_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM9_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM9_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM9_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM9_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM9_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM9_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM9_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM9_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM9_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM9_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11440++0x18F line.long 0x0 "MBC0_DOM10_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM10_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM10_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM10_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM10_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM10_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM10_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM10_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM10_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM10_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM10_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM10_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM10_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM10_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM10_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM10_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM10_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM10_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM10_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM10_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM10_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM10_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM10_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM10_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM10_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM10_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM10_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM10_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM10_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM10_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM10_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM10_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM10_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM10_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM10_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM10_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM10_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM10_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM10_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM10_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM10_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM10_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM10_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM10_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM10_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM10_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM10_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM10_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM10_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM10_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM10_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM10_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM10_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM10_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM10_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM10_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM10_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM10_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM10_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM10_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM10_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM10_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM10_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM10_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM10_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM10_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM10_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM10_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM10_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM10_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM10_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM10_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM10_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM10_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM10_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM10_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM10_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM10_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM10_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM10_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM10_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM10_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM10_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM10_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM10_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM10_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM10_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM10_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM10_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM10_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM10_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM10_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM10_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM10_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM10_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM10_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM10_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM10_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM10_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM10_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11640++0x18F line.long 0x0 "MBC0_DOM11_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM11_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM11_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM11_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM11_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM11_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM11_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM11_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM11_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM11_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM11_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM11_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM11_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM11_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM11_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM11_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM11_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM11_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM11_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM11_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM11_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM11_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM11_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM11_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM11_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM11_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM11_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM11_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM11_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM11_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM11_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM11_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM11_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM11_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM11_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM11_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM11_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM11_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM11_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM11_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM11_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM11_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM11_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM11_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM11_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM11_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM11_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM11_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM11_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM11_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM11_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM11_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM11_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM11_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM11_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM11_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM11_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM11_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM11_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM11_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM11_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM11_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM11_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM11_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM11_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM11_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM11_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM11_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM11_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM11_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM11_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM11_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM11_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM11_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM11_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM11_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM11_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM11_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM11_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM11_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM11_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM11_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM11_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM11_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM11_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM11_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM11_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM11_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM11_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM11_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM11_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM11_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM11_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM11_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM11_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM11_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM11_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM11_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM11_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM11_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11840++0x18F line.long 0x0 "MBC0_DOM12_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM12_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM12_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM12_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM12_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM12_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM12_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM12_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM12_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM12_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM12_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM12_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM12_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM12_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM12_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM12_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM12_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM12_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM12_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM12_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM12_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM12_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM12_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM12_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM12_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM12_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM12_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM12_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM12_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM12_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM12_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM12_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM12_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM12_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM12_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM12_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM12_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM12_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM12_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM12_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM12_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM12_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM12_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM12_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM12_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM12_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM12_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM12_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM12_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM12_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM12_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM12_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM12_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM12_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM12_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM12_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM12_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM12_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM12_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM12_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM12_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM12_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM12_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM12_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM12_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM12_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM12_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM12_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM12_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM12_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM12_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM12_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM12_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM12_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM12_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM12_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM12_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM12_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM12_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM12_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM12_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM12_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM12_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM12_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM12_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM12_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM12_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM12_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM12_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM12_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM12_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM12_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM12_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM12_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM12_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM12_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM12_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM12_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM12_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM12_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11A40++0x18F line.long 0x0 "MBC0_DOM13_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM13_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM13_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM13_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM13_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM13_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM13_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM13_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM13_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM13_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM13_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM13_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM13_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM13_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM13_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM13_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM13_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM13_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM13_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM13_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM13_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM13_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM13_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM13_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM13_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM13_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM13_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM13_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM13_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM13_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM13_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM13_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM13_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM13_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM13_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM13_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM13_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM13_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM13_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM13_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM13_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM13_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM13_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM13_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM13_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM13_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM13_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM13_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM13_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM13_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM13_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM13_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM13_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM13_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM13_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM13_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM13_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM13_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM13_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM13_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM13_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM13_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM13_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM13_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM13_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM13_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM13_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM13_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM13_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM13_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM13_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM13_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM13_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM13_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM13_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM13_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM13_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM13_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM13_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM13_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM13_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM13_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM13_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM13_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM13_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM13_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM13_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM13_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM13_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM13_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM13_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM13_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM13_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM13_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM13_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM13_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM13_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM13_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM13_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM13_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11C40++0x18F line.long 0x0 "MBC0_DOM14_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM14_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM14_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM14_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM14_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM14_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM14_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM14_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM14_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM14_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM14_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM14_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM14_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM14_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM14_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM14_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM14_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM14_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM14_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM14_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM14_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM14_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM14_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM14_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM14_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM14_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM14_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM14_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM14_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM14_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM14_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM14_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM14_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM14_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM14_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM14_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM14_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM14_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM14_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM14_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM14_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM14_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM14_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM14_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM14_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM14_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM14_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM14_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM14_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM14_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM14_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM14_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM14_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM14_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM14_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM14_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM14_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM14_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM14_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM14_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM14_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM14_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM14_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM14_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM14_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM14_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM14_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM14_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM14_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM14_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM14_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM14_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM14_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM14_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM14_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM14_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM14_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM14_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM14_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM14_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM14_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM14_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM14_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM14_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM14_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM14_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM14_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM14_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM14_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM14_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM14_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM14_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM14_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM14_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM14_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM14_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM14_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM14_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM14_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM14_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x11E40++0x18F line.long 0x0 "MBC0_DOM15_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC0_DOM15_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC0_DOM15_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC0_DOM15_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC0_DOM15_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC0_DOM15_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC0_DOM15_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC0_DOM15_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC0_DOM15_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC0_DOM15_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC0_DOM15_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC0_DOM15_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC0_DOM15_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC0_DOM15_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC0_DOM15_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC0_DOM15_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC0_DOM15_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC0_DOM15_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC0_DOM15_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC0_DOM15_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC0_DOM15_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC0_DOM15_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC0_DOM15_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC0_DOM15_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC0_DOM15_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC0_DOM15_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC0_DOM15_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC0_DOM15_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC0_DOM15_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC0_DOM15_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC0_DOM15_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC0_DOM15_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC0_DOM15_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC0_DOM15_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC0_DOM15_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC0_DOM15_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC0_DOM15_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC0_DOM15_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC0_DOM15_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC0_DOM15_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC0_DOM15_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC0_DOM15_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC0_DOM15_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC0_DOM15_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC0_DOM15_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC0_DOM15_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC0_DOM15_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC0_DOM15_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC0_DOM15_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC0_DOM15_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC0_DOM15_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC0_DOM15_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC0_DOM15_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC0_DOM15_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC0_DOM15_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC0_DOM15_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC0_DOM15_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC0_DOM15_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC0_DOM15_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC0_DOM15_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC0_DOM15_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC0_DOM15_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC0_DOM15_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC0_DOM15_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC0_DOM15_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC0_DOM15_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC0_DOM15_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC0_DOM15_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC0_DOM15_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC0_DOM15_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC0_DOM15_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC0_DOM15_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC0_DOM15_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC0_DOM15_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC0_DOM15_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC0_DOM15_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC0_DOM15_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC0_DOM15_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC0_DOM15_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC0_DOM15_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC0_DOM15_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC0_DOM15_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC0_DOM15_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC0_DOM15_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC0_DOM15_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC0_DOM15_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC0_DOM15_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC0_DOM15_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC0_DOM15_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC0_DOM15_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC0_DOM15_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x168 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x168 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x16C "MBC0_DOM15_MEM2_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x16C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x16C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x170 "MBC0_DOM15_MEM2_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC0_DOM15_MEM2_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC0_DOM15_MEM2_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC0_DOM15_MEM2_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC0_DOM15_MEM2_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC0_DOM15_MEM2_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC0_DOM15_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x188 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x18C "MBC0_DOM15_MEM2_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x18C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." rgroup.long 0x12000++0xF line.long 0x0 "MBC1_MEM0_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0x0 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0x0 0.--9. 1. "NBLKS,Number of blocks in this memory" line.long 0x4 "MBC1_MEM1_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0x4 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0x4 0.--9. 1. "NBLKS,Number of blocks in this memory" line.long 0x8 "MBC1_MEM2_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0x8 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0x8 0.--9. 1. "NBLKS,Number of blocks in this memory" line.long 0xC "MBC1_MEM3_GLBCFG,MBC Global Configuration Register" hexmask.long.byte 0xC 16.--20. 1. "SIZE_LOG2,Log2 size per block" newline hexmask.long.word 0xC 0.--9. 1. "NBLKS,Number of blocks in this memory" group.long 0x12010++0x197 line.long 0x0 "MBC1_NSE_BLK_INDEX,MBC NonSecure Enable Block Index" bitfld.long 0x0 31. "DID_SEL15,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 30. "DID_SEL14,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 29. "DID_SEL13,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 28. "DID_SEL12,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 27. "DID_SEL11,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 26. "DID_SEL10,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 25. "DID_SEL9,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 24. "DID_SEL8,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 23. "DID_SEL7,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 22. "DID_SEL6,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 21. "DID_SEL5,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 20. "DID_SEL4,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 19. "DID_SEL3,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 18. "DID_SEL2,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 17. "DID_SEL1,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline bitfld.long 0x0 16. "DID_SEL0,DID Select" "0: No effect.,1: Selects NSE bits for this domain." newline hexmask.long.byte 0x0 8.--11. 1. "MEM_SEL,Memory Select" newline hexmask.long.byte 0x0 2.--5. 1. "WNDX,Word index into the block NSE bitmap. It selects the BLK_NSE_Wn register where WNDX determines the value of n." newline bitfld.long 0x0 0. "AI,Auto Increment" "0: No effect.,1: Add 1 to the WNDX field after the register write." line.long 0x4 "MBC1_NSE_BLK_SET,MBC NonSecure Enable Block Set" hexmask.long 0x4 0.--31. 1. "W1SET,Write-1 Set" line.long 0x8 "MBC1_NSE_BLK_CLR,MBC NonSecure Enable Block Clear" hexmask.long 0x8 0.--31. 1. "W1CLR,Write-1 Clear" line.long 0xC "MBC1_NSE_BLK_CLR_ALL,MBC NonSecure Enable Block Clear All" bitfld.long 0xC 31. "DID_SEL15,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 30. "DID_SEL14,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 29. "DID_SEL13,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 28. "DID_SEL12,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 27. "DID_SEL11,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 26. "DID_SEL10,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 25. "DID_SEL9,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 24. "DID_SEL8,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 23. "DID_SEL7,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 22. "DID_SEL6,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 21. "DID_SEL5,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 20. "DID_SEL4,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 19. "DID_SEL3,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 18. "DID_SEL2,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 17. "DID_SEL1,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline bitfld.long 0xC 16. "DID_SEL0,DID Select" "0: No effect.,1: Clear all NSE bits for this domain." newline hexmask.long.byte 0xC 8.--11. 1. "MEMSEL,Memory Select" line.long 0x10 "MBC1_MEMN_GLBAC0,MBC Global Access Control" bitfld.long 0x10 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x10 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x10 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x10 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x10 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x10 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x10 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x10 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x10 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x14 "MBC1_MEMN_GLBAC1,MBC Global Access Control" bitfld.long 0x14 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x14 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x14 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x14 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x14 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x14 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x14 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x14 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x14 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x14 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x18 "MBC1_MEMN_GLBAC2,MBC Global Access Control" bitfld.long 0x18 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x18 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x18 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x18 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x18 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x18 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x18 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x18 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x18 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x18 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x1C "MBC1_MEMN_GLBAC3,MBC Global Access Control" bitfld.long 0x1C 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x1C 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x1C 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x1C 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x1C 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x1C 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x1C 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x1C 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x1C 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x1C 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x20 "MBC1_MEMN_GLBAC4,MBC Global Access Control" bitfld.long 0x20 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x20 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x20 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x20 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x20 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x20 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x20 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x20 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x20 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x20 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x24 "MBC1_MEMN_GLBAC5,MBC Global Access Control" bitfld.long 0x24 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x24 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x24 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x24 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x24 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x24 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x24 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x24 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x24 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x24 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x28 "MBC1_MEMN_GLBAC6,MBC Global Access Control" bitfld.long 0x28 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x28 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x28 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x28 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x28 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x28 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x28 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x28 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x28 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x28 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x2C "MBC1_MEMN_GLBAC7,MBC Global Access Control" bitfld.long 0x2C 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked and cannot be altered." newline bitfld.long 0x2C 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x2C 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x2C 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x2C 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x2C 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x2C 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x2C 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x2C 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x2C 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x30 "MBC1_DOM0_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM0_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM0_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM0_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM0_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM0_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM0_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM0_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM0_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM0_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM0_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM0_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM0_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM0_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM0_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM0_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM0_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM0_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM0_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM0_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM0_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM0_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM0_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM0_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM0_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM0_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM0_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM0_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM0_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM0_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM0_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM0_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM0_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM0_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM0_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM0_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM0_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM0_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM0_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM0_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM0_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM0_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM0_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM0_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM0_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM0_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM0_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM0_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM0_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM0_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM0_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM0_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM0_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0x100 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x100 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x104 "MBC1_DOM0_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0x104 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x104 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x108 "MBC1_DOM0_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0x108 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x108 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10C "MBC1_DOM0_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0x10C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x110 "MBC1_DOM0_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0x110 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x110 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x114 "MBC1_DOM0_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0x114 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x114 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x118 "MBC1_DOM0_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0x118 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x118 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x11C "MBC1_DOM0_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0x11C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x11C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x120 "MBC1_DOM0_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0x120 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x120 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x124 "MBC1_DOM0_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0x124 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x124 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x128 "MBC1_DOM0_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0x128 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x128 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x12C "MBC1_DOM0_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0x12C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x12C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x130 "MBC1_DOM0_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM0_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM0_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM0_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM0_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x140 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x144 "MBC1_DOM0_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x144 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x148 "MBC1_DOM0_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x148 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x14C "MBC1_DOM0_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x14C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x150 "MBC1_DOM0_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x150 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x154 "MBC1_DOM0_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x154 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x158 "MBC1_DOM0_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x158 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x15C "MBC1_DOM0_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x15C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x160 "MBC1_DOM0_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM0_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x168 "MBC1_DOM0_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x168 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x168 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x16C "MBC1_DOM0_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x16C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x16C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x170 "MBC1_DOM0_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x170 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x170 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x170 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x174 "MBC1_DOM0_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x174 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x174 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x174 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x178 "MBC1_DOM0_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x178 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x178 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x178 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x17C "MBC1_DOM0_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x17C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x17C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x17C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x180 "MBC1_DOM0_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x180 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x180 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x180 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x184 "MBC1_DOM0_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x184 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x184 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x184 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x188 "MBC1_DOM0_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x188 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x188 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x188 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18C "MBC1_DOM0_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x18C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x190 "MBC1_DOM0_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x190 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x190 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x194 "MBC1_DOM0_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x194 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x194 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12240++0x167 line.long 0x0 "MBC1_DOM1_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM1_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM1_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM1_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM1_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM1_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM1_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM1_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM1_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM1_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM1_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM1_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM1_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM1_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM1_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM1_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM1_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM1_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM1_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM1_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM1_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM1_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM1_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM1_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM1_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM1_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM1_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM1_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM1_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM1_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM1_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM1_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM1_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM1_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM1_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM1_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM1_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM1_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM1_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM1_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM1_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM1_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM1_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM1_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM1_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM1_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM1_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM1_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM1_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM1_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM1_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM1_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM1_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM1_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM1_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM1_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM1_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM1_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM1_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM1_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM1_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM1_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM1_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM1_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM1_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM1_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM1_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM1_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM1_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM1_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM1_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM1_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM1_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM1_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM1_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM1_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM1_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM1_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM1_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM1_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM1_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM1_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM1_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM1_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM1_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM1_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM1_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM1_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM1_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM1_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12440++0x167 line.long 0x0 "MBC1_DOM2_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM2_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM2_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM2_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM2_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM2_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM2_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM2_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM2_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM2_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM2_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM2_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM2_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM2_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM2_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM2_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM2_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM2_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM2_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM2_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM2_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM2_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM2_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM2_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM2_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM2_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM2_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM2_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM2_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM2_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM2_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM2_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM2_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM2_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM2_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM2_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM2_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM2_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM2_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM2_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM2_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM2_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM2_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM2_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM2_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM2_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM2_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM2_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM2_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM2_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM2_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM2_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM2_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM2_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM2_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM2_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM2_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM2_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM2_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM2_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM2_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM2_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM2_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM2_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM2_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM2_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM2_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM2_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM2_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM2_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM2_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM2_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM2_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM2_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM2_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM2_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM2_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM2_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM2_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM2_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM2_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM2_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM2_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM2_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM2_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM2_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM2_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM2_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM2_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM2_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12640++0x167 line.long 0x0 "MBC1_DOM3_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM3_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM3_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM3_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM3_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM3_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM3_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM3_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM3_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM3_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM3_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM3_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM3_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM3_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM3_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM3_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM3_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM3_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM3_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM3_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM3_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM3_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM3_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM3_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM3_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM3_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM3_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM3_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM3_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM3_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM3_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM3_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM3_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM3_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM3_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM3_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM3_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM3_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM3_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM3_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM3_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM3_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM3_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM3_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM3_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM3_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM3_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM3_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM3_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM3_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM3_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM3_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM3_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM3_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM3_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM3_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM3_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM3_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM3_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM3_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM3_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM3_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM3_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM3_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM3_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM3_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM3_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM3_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM3_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM3_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM3_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM3_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM3_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM3_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM3_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM3_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM3_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM3_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM3_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM3_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM3_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM3_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM3_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM3_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM3_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM3_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM3_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM3_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM3_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM3_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12840++0x167 line.long 0x0 "MBC1_DOM4_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM4_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM4_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM4_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM4_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM4_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM4_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM4_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM4_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM4_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM4_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM4_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM4_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM4_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM4_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM4_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM4_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM4_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM4_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM4_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM4_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM4_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM4_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM4_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM4_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM4_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM4_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM4_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM4_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM4_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM4_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM4_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM4_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM4_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM4_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM4_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM4_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM4_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM4_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM4_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM4_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM4_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM4_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM4_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM4_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM4_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM4_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM4_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM4_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM4_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM4_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM4_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM4_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM4_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM4_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM4_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM4_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM4_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM4_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM4_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM4_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM4_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM4_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM4_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM4_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM4_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM4_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM4_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM4_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM4_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM4_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM4_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM4_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM4_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM4_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM4_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM4_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM4_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM4_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM4_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM4_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM4_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM4_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM4_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM4_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM4_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM4_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM4_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM4_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM4_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12A40++0x167 line.long 0x0 "MBC1_DOM5_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM5_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM5_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM5_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM5_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM5_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM5_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM5_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM5_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM5_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM5_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM5_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM5_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM5_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM5_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM5_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM5_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM5_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM5_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM5_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM5_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM5_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM5_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM5_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM5_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM5_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM5_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM5_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM5_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM5_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM5_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM5_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM5_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM5_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM5_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM5_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM5_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM5_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM5_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM5_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM5_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM5_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM5_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM5_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM5_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM5_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM5_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM5_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM5_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM5_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM5_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM5_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM5_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM5_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM5_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM5_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM5_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM5_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM5_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM5_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM5_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM5_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM5_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM5_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM5_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM5_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM5_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM5_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM5_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM5_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM5_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM5_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM5_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM5_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM5_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM5_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM5_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM5_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM5_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM5_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM5_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM5_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM5_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM5_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM5_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM5_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM5_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM5_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM5_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM5_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12C40++0x167 line.long 0x0 "MBC1_DOM6_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM6_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM6_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM6_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM6_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM6_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM6_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM6_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM6_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM6_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM6_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM6_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM6_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM6_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM6_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM6_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM6_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM6_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM6_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM6_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM6_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM6_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM6_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM6_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM6_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM6_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM6_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM6_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM6_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM6_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM6_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM6_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM6_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM6_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM6_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM6_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM6_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM6_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM6_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM6_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM6_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM6_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM6_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM6_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM6_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM6_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM6_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM6_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM6_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM6_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM6_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM6_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM6_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM6_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM6_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM6_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM6_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM6_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM6_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM6_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM6_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM6_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM6_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM6_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM6_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM6_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM6_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM6_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM6_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM6_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM6_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM6_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM6_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM6_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM6_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM6_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM6_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM6_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM6_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM6_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM6_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM6_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM6_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM6_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM6_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM6_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM6_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM6_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM6_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM6_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x12E40++0x167 line.long 0x0 "MBC1_DOM7_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM7_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM7_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM7_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM7_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM7_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM7_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM7_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM7_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM7_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM7_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM7_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM7_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM7_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM7_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM7_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM7_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM7_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM7_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM7_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM7_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM7_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM7_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM7_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM7_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM7_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM7_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM7_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM7_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM7_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM7_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM7_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM7_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM7_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM7_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM7_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM7_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM7_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM7_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM7_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM7_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM7_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM7_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM7_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM7_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM7_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM7_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM7_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM7_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM7_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM7_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM7_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM7_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM7_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM7_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM7_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM7_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM7_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM7_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM7_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM7_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM7_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM7_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM7_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM7_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM7_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM7_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM7_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM7_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM7_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM7_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM7_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM7_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM7_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM7_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM7_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM7_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM7_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM7_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM7_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM7_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM7_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM7_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM7_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM7_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM7_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM7_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM7_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM7_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM7_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13040++0x167 line.long 0x0 "MBC1_DOM8_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM8_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM8_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM8_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM8_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM8_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM8_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM8_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM8_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM8_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM8_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM8_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM8_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM8_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM8_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM8_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM8_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM8_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM8_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM8_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM8_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM8_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM8_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM8_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM8_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM8_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM8_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM8_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM8_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM8_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM8_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM8_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM8_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM8_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM8_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM8_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM8_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM8_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM8_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM8_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM8_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM8_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM8_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM8_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM8_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM8_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM8_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM8_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM8_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM8_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM8_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM8_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM8_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM8_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM8_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM8_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM8_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM8_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM8_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM8_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM8_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM8_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM8_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM8_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM8_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM8_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM8_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM8_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM8_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM8_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM8_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM8_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM8_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM8_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM8_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM8_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM8_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM8_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM8_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM8_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM8_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM8_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM8_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM8_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM8_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM8_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM8_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM8_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM8_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM8_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13240++0x167 line.long 0x0 "MBC1_DOM9_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM9_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM9_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM9_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM9_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM9_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM9_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM9_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM9_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM9_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM9_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM9_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM9_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM9_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM9_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM9_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM9_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM9_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM9_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM9_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM9_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM9_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM9_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM9_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM9_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM9_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM9_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM9_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM9_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM9_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM9_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM9_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM9_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM9_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM9_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM9_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM9_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM9_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM9_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM9_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM9_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM9_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM9_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM9_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM9_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM9_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM9_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM9_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM9_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM9_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM9_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM9_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM9_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM9_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM9_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM9_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM9_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM9_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM9_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM9_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM9_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM9_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM9_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM9_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM9_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM9_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM9_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM9_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM9_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM9_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM9_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM9_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM9_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM9_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM9_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM9_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM9_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM9_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM9_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM9_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM9_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM9_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM9_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM9_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM9_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM9_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM9_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM9_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM9_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM9_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13440++0x167 line.long 0x0 "MBC1_DOM10_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM10_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM10_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM10_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM10_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM10_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM10_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM10_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM10_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM10_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM10_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM10_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM10_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM10_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM10_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM10_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM10_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM10_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM10_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM10_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM10_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM10_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM10_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM10_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM10_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM10_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM10_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM10_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM10_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM10_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM10_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM10_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM10_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM10_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM10_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM10_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM10_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM10_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM10_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM10_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM10_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM10_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM10_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM10_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM10_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM10_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM10_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM10_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM10_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM10_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM10_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM10_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM10_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM10_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM10_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM10_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM10_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM10_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM10_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM10_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM10_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM10_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM10_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM10_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM10_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM10_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM10_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM10_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM10_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM10_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM10_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM10_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM10_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM10_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM10_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM10_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM10_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM10_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM10_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM10_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM10_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM10_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM10_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM10_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM10_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM10_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM10_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM10_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM10_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM10_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13640++0x167 line.long 0x0 "MBC1_DOM11_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM11_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM11_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM11_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM11_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM11_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM11_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM11_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM11_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM11_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM11_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM11_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM11_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM11_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM11_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM11_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM11_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM11_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM11_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM11_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM11_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM11_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM11_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM11_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM11_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM11_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM11_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM11_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM11_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM11_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM11_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM11_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM11_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM11_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM11_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM11_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM11_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM11_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM11_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM11_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM11_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM11_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM11_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM11_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM11_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM11_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM11_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM11_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM11_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM11_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM11_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM11_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM11_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM11_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM11_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM11_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM11_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM11_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM11_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM11_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM11_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM11_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM11_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM11_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM11_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM11_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM11_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM11_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM11_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM11_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM11_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM11_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM11_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM11_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM11_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM11_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM11_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM11_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM11_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM11_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM11_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM11_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM11_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM11_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM11_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM11_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM11_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM11_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM11_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM11_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13840++0x167 line.long 0x0 "MBC1_DOM12_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM12_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM12_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM12_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM12_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM12_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM12_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM12_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM12_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM12_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM12_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM12_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM12_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM12_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM12_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM12_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM12_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM12_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM12_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM12_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM12_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM12_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM12_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM12_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM12_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM12_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM12_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM12_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM12_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM12_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM12_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM12_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM12_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM12_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM12_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM12_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM12_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM12_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM12_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM12_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM12_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM12_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM12_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM12_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM12_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM12_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM12_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM12_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM12_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM12_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM12_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM12_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM12_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM12_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM12_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM12_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM12_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM12_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM12_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM12_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM12_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM12_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM12_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM12_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM12_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM12_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM12_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM12_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM12_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM12_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM12_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM12_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM12_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM12_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM12_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM12_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM12_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM12_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM12_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM12_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM12_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM12_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM12_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM12_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM12_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM12_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM12_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM12_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM12_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM12_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13A40++0x167 line.long 0x0 "MBC1_DOM13_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM13_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM13_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM13_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM13_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM13_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM13_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM13_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM13_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM13_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM13_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM13_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM13_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM13_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM13_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM13_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM13_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM13_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM13_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM13_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM13_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM13_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM13_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM13_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM13_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM13_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM13_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM13_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM13_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM13_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM13_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM13_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM13_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM13_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM13_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM13_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM13_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM13_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM13_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM13_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM13_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM13_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM13_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM13_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM13_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM13_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM13_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM13_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM13_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM13_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM13_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM13_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM13_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM13_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM13_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM13_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM13_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM13_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM13_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM13_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM13_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM13_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM13_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM13_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM13_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM13_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM13_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM13_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM13_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM13_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM13_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM13_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM13_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM13_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM13_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM13_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM13_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM13_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM13_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM13_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM13_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM13_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM13_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM13_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM13_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM13_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM13_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM13_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM13_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM13_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13C40++0x167 line.long 0x0 "MBC1_DOM14_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM14_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM14_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM14_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM14_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM14_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM14_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM14_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM14_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM14_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM14_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM14_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM14_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM14_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM14_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM14_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM14_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM14_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM14_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM14_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM14_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM14_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM14_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM14_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM14_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM14_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM14_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM14_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM14_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM14_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM14_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM14_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM14_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM14_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM14_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM14_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM14_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM14_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM14_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM14_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM14_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM14_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM14_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM14_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM14_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM14_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM14_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM14_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM14_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM14_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM14_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM14_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM14_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM14_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM14_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM14_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM14_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM14_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM14_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM14_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM14_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM14_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM14_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM14_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM14_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM14_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM14_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM14_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM14_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM14_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM14_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM14_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM14_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM14_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM14_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM14_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM14_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM14_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM14_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM14_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM14_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM14_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM14_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM14_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM14_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM14_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM14_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM14_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM14_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM14_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." group.long 0x13E40++0x167 line.long 0x0 "MBC1_DOM15_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4 "MBC1_DOM15_MEM0_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8 "MBC1_DOM15_MEM0_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC "MBC1_DOM15_MEM0_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0xC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x10 "MBC1_DOM15_MEM0_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x10 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x10 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14 "MBC1_DOM15_MEM0_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x14 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x18 "MBC1_DOM15_MEM0_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x18 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x18 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x18 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x1C "MBC1_DOM15_MEM0_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x1C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x1C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x1C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x20 "MBC1_DOM15_MEM0_BLK_CFG_W8,MBC Memory Block Configuration Word" bitfld.long 0x20 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x20 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x20 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x24 "MBC1_DOM15_MEM0_BLK_CFG_W9,MBC Memory Block Configuration Word" bitfld.long 0x24 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x24 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x24 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x28 "MBC1_DOM15_MEM0_BLK_CFG_W10,MBC Memory Block Configuration Word" bitfld.long 0x28 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x28 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x28 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x2C "MBC1_DOM15_MEM0_BLK_CFG_W11,MBC Memory Block Configuration Word" bitfld.long 0x2C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x2C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x2C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x30 "MBC1_DOM15_MEM0_BLK_CFG_W12,MBC Memory Block Configuration Word" bitfld.long 0x30 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x30 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x30 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x34 "MBC1_DOM15_MEM0_BLK_CFG_W13,MBC Memory Block Configuration Word" bitfld.long 0x34 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x34 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x34 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x38 "MBC1_DOM15_MEM0_BLK_CFG_W14,MBC Memory Block Configuration Word" bitfld.long 0x38 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x38 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x38 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x3C "MBC1_DOM15_MEM0_BLK_CFG_W15,MBC Memory Block Configuration Word" bitfld.long 0x3C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x3C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x3C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x40 "MBC1_DOM15_MEM0_BLK_CFG_W16,MBC Memory Block Configuration Word" bitfld.long 0x40 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x40 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x40 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x44 "MBC1_DOM15_MEM0_BLK_CFG_W17,MBC Memory Block Configuration Word" bitfld.long 0x44 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x44 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x44 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x48 "MBC1_DOM15_MEM0_BLK_CFG_W18,MBC Memory Block Configuration Word" bitfld.long 0x48 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x48 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x48 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x4C "MBC1_DOM15_MEM0_BLK_CFG_W19,MBC Memory Block Configuration Word" bitfld.long 0x4C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x4C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x4C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x50 "MBC1_DOM15_MEM0_BLK_CFG_W20,MBC Memory Block Configuration Word" bitfld.long 0x50 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x50 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x50 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x54 "MBC1_DOM15_MEM0_BLK_CFG_W21,MBC Memory Block Configuration Word" bitfld.long 0x54 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x54 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x54 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x58 "MBC1_DOM15_MEM0_BLK_CFG_W22,MBC Memory Block Configuration Word" bitfld.long 0x58 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x58 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x58 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x5C "MBC1_DOM15_MEM0_BLK_CFG_W23,MBC Memory Block Configuration Word" bitfld.long 0x5C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x5C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x5C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x60 "MBC1_DOM15_MEM0_BLK_CFG_W24,MBC Memory Block Configuration Word" bitfld.long 0x60 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x60 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x60 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x64 "MBC1_DOM15_MEM0_BLK_CFG_W25,MBC Memory Block Configuration Word" bitfld.long 0x64 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x64 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x64 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x68 "MBC1_DOM15_MEM0_BLK_CFG_W26,MBC Memory Block Configuration Word" bitfld.long 0x68 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x68 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x68 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x6C "MBC1_DOM15_MEM0_BLK_CFG_W27,MBC Memory Block Configuration Word" bitfld.long 0x6C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x6C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x6C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x70 "MBC1_DOM15_MEM0_BLK_CFG_W28,MBC Memory Block Configuration Word" bitfld.long 0x70 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x70 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x70 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x74 "MBC1_DOM15_MEM0_BLK_CFG_W29,MBC Memory Block Configuration Word" bitfld.long 0x74 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x74 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x74 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x78 "MBC1_DOM15_MEM0_BLK_CFG_W30,MBC Memory Block Configuration Word" bitfld.long 0x78 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x78 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x78 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x7C "MBC1_DOM15_MEM0_BLK_CFG_W31,MBC Memory Block Configuration Word" bitfld.long 0x7C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x7C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x7C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x80 "MBC1_DOM15_MEM0_BLK_CFG_W32,MBC Memory Block Configuration Word" bitfld.long 0x80 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x80 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x80 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x84 "MBC1_DOM15_MEM0_BLK_CFG_W33,MBC Memory Block Configuration Word" bitfld.long 0x84 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x84 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x84 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x88 "MBC1_DOM15_MEM0_BLK_CFG_W34,MBC Memory Block Configuration Word" bitfld.long 0x88 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x88 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x88 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x8C "MBC1_DOM15_MEM0_BLK_CFG_W35,MBC Memory Block Configuration Word" bitfld.long 0x8C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x8C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x8C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x90 "MBC1_DOM15_MEM0_BLK_CFG_W36,MBC Memory Block Configuration Word" bitfld.long 0x90 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x90 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x90 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x94 "MBC1_DOM15_MEM0_BLK_CFG_W37,MBC Memory Block Configuration Word" bitfld.long 0x94 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x94 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x94 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x98 "MBC1_DOM15_MEM0_BLK_CFG_W38,MBC Memory Block Configuration Word" bitfld.long 0x98 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x98 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x98 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x9C "MBC1_DOM15_MEM0_BLK_CFG_W39,MBC Memory Block Configuration Word" bitfld.long 0x9C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x9C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x9C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA0 "MBC1_DOM15_MEM0_BLK_CFG_W40,MBC Memory Block Configuration Word" bitfld.long 0xA0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA4 "MBC1_DOM15_MEM0_BLK_CFG_W41,MBC Memory Block Configuration Word" bitfld.long 0xA4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xA8 "MBC1_DOM15_MEM0_BLK_CFG_W42,MBC Memory Block Configuration Word" bitfld.long 0xA8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xA8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xA8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xAC "MBC1_DOM15_MEM0_BLK_CFG_W43,MBC Memory Block Configuration Word" bitfld.long 0xAC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xAC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xAC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB0 "MBC1_DOM15_MEM0_BLK_CFG_W44,MBC Memory Block Configuration Word" bitfld.long 0xB0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB4 "MBC1_DOM15_MEM0_BLK_CFG_W45,MBC Memory Block Configuration Word" bitfld.long 0xB4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xB8 "MBC1_DOM15_MEM0_BLK_CFG_W46,MBC Memory Block Configuration Word" bitfld.long 0xB8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xB8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xB8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xBC "MBC1_DOM15_MEM0_BLK_CFG_W47,MBC Memory Block Configuration Word" bitfld.long 0xBC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xBC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xBC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC0 "MBC1_DOM15_MEM0_BLK_CFG_W48,MBC Memory Block Configuration Word" bitfld.long 0xC0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC4 "MBC1_DOM15_MEM0_BLK_CFG_W49,MBC Memory Block Configuration Word" bitfld.long 0xC4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xC8 "MBC1_DOM15_MEM0_BLK_CFG_W50,MBC Memory Block Configuration Word" bitfld.long 0xC8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xC8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xC8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xCC "MBC1_DOM15_MEM0_BLK_CFG_W51,MBC Memory Block Configuration Word" bitfld.long 0xCC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xCC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xCC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD0 "MBC1_DOM15_MEM0_BLK_CFG_W52,MBC Memory Block Configuration Word" bitfld.long 0xD0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD4 "MBC1_DOM15_MEM0_BLK_CFG_W53,MBC Memory Block Configuration Word" bitfld.long 0xD4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xD8 "MBC1_DOM15_MEM0_BLK_CFG_W54,MBC Memory Block Configuration Word" bitfld.long 0xD8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xD8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xD8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xDC "MBC1_DOM15_MEM0_BLK_CFG_W55,MBC Memory Block Configuration Word" bitfld.long 0xDC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xDC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xDC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE0 "MBC1_DOM15_MEM0_BLK_CFG_W56,MBC Memory Block Configuration Word" bitfld.long 0xE0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE4 "MBC1_DOM15_MEM0_BLK_CFG_W57,MBC Memory Block Configuration Word" bitfld.long 0xE4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xE8 "MBC1_DOM15_MEM0_BLK_CFG_W58,MBC Memory Block Configuration Word" bitfld.long 0xE8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xE8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xE8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xEC "MBC1_DOM15_MEM0_BLK_CFG_W59,MBC Memory Block Configuration Word" bitfld.long 0xEC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xEC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xEC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF0 "MBC1_DOM15_MEM0_BLK_CFG_W60,MBC Memory Block Configuration Word" bitfld.long 0xF0 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF0 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF0 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF4 "MBC1_DOM15_MEM0_BLK_CFG_W61,MBC Memory Block Configuration Word" bitfld.long 0xF4 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF4 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF4 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xF8 "MBC1_DOM15_MEM0_BLK_CFG_W62,MBC Memory Block Configuration Word" bitfld.long 0xF8 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xF8 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xF8 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0xFC "MBC1_DOM15_MEM0_BLK_CFG_W63,MBC Memory Block Configuration Word" bitfld.long 0xFC 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0xFC 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0xFC 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x100 "MBC1_DOM15_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x100 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x100 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x104 "MBC1_DOM15_MEM0_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x104 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x104 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x108 "MBC1_DOM15_MEM0_BLK_NSE_W2,MBC Memory Block NonSecure Enable Word" bitfld.long 0x108 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x108 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x10C "MBC1_DOM15_MEM0_BLK_NSE_W3,MBC Memory Block NonSecure Enable Word" bitfld.long 0x10C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x10C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x110 "MBC1_DOM15_MEM0_BLK_NSE_W4,MBC Memory Block NonSecure Enable Word" bitfld.long 0x110 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x110 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x114 "MBC1_DOM15_MEM0_BLK_NSE_W5,MBC Memory Block NonSecure Enable Word" bitfld.long 0x114 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x114 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x118 "MBC1_DOM15_MEM0_BLK_NSE_W6,MBC Memory Block NonSecure Enable Word" bitfld.long 0x118 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x118 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x11C "MBC1_DOM15_MEM0_BLK_NSE_W7,MBC Memory Block NonSecure Enable Word" bitfld.long 0x11C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x11C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x120 "MBC1_DOM15_MEM0_BLK_NSE_W8,MBC Memory Block NonSecure Enable Word" bitfld.long 0x120 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x120 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x124 "MBC1_DOM15_MEM0_BLK_NSE_W9,MBC Memory Block NonSecure Enable Word" bitfld.long 0x124 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x124 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x128 "MBC1_DOM15_MEM0_BLK_NSE_W10,MBC Memory Block NonSecure Enable Word" bitfld.long 0x128 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x128 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x12C "MBC1_DOM15_MEM0_BLK_NSE_W11,MBC Memory Block NonSecure Enable Word" bitfld.long 0x12C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x12C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x130 "MBC1_DOM15_MEM0_BLK_NSE_W12,MBC Memory Block NonSecure Enable Word" bitfld.long 0x130 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x130 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x134 "MBC1_DOM15_MEM0_BLK_NSE_W13,MBC Memory Block NonSecure Enable Word" bitfld.long 0x134 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x134 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x138 "MBC1_DOM15_MEM0_BLK_NSE_W14,MBC Memory Block NonSecure Enable Word" bitfld.long 0x138 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x138 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x13C "MBC1_DOM15_MEM0_BLK_NSE_W15,MBC Memory Block NonSecure Enable Word" bitfld.long 0x13C 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x13C 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x140 "MBC1_DOM15_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x140 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x140 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x140 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x144 "MBC1_DOM15_MEM1_BLK_CFG_W1,MBC Memory Block Configuration Word" bitfld.long 0x144 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x144 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x144 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x148 "MBC1_DOM15_MEM1_BLK_CFG_W2,MBC Memory Block Configuration Word" bitfld.long 0x148 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x148 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x148 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x14C "MBC1_DOM15_MEM1_BLK_CFG_W3,MBC Memory Block Configuration Word" bitfld.long 0x14C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x14C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x14C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x150 "MBC1_DOM15_MEM1_BLK_CFG_W4,MBC Memory Block Configuration Word" bitfld.long 0x150 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x150 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x150 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x154 "MBC1_DOM15_MEM1_BLK_CFG_W5,MBC Memory Block Configuration Word" bitfld.long 0x154 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x154 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x154 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x158 "MBC1_DOM15_MEM1_BLK_CFG_W6,MBC Memory Block Configuration Word" bitfld.long 0x158 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x158 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x158 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x15C "MBC1_DOM15_MEM1_BLK_CFG_W7,MBC Memory Block Configuration Word" bitfld.long 0x15C 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." newline bitfld.long 0x15C 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x15C 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy for..,1: select MBC_MEMN_GLBAC1 access control policy for..,2: select MBC_MEMN_GLBAC2 access control policy for..,3: select MBC_MEMN_GLBAC3 access control policy for..,4: select MBC_MEMN_GLBAC4 access control policy for..,5: select MBC_MEMN_GLBAC5 access control policy for..,6: select MBC_MEMN_GLBAC6 access control policy for..,7: select MBC_MEMN_GLBAC7 access control policy for.." line.long 0x160 "MBC1_DOM15_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x160 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x160 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." line.long 0x164 "MBC1_DOM15_MEM1_BLK_NSE_W1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x164 31. "BIT31,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 30. "BIT30,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 29. "BIT29,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 28. "BIT28,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 27. "BIT27,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 26. "BIT26,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 25. "BIT25,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 24. "BIT24,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 23. "BIT23,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 22. "BIT22,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 21. "BIT21,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 20. "BIT20,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 19. "BIT19,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 18. "BIT18,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 17. "BIT17,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 16. "BIT16,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 15. "BIT15,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 14. "BIT14,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 13. "BIT13,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 12. "BIT12,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 11. "BIT11,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 10. "BIT10,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 9. "BIT9,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 8. "BIT8,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 7. "BIT7,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 6. "BIT6,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 5. "BIT5,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 4. "BIT4,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 3. "BIT3,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 2. "BIT2,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 1. "BIT1,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x164 0. "BIT0,Bit b NonSecure Enable [b = 0 - 31]" "0: Secure accesses to block B are based on..,1: Secure accesses to block B are not allowed.." rgroup.long 0x14000++0x3 line.long 0x0 "MRC0_GLBCFG,MRC Global Configuration Register" hexmask.long.byte 0x0 0.--4. 1. "NRGNS,Number of regions [1-16]" group.long 0x14010++0x6F line.long 0x0 "MRC0_NSE_RGN_INDIRECT,MRC NonSecure Enable Region Indirect" hexmask.long.word 0x0 16.--31. 1. "DID_SEL,DID Select" line.long 0x4 "MRC0_NSE_RGN_SET,MRC NonSecure Enable Region Set" hexmask.long.word 0x4 0.--15. 1. "W1SET,Write-1 Set" line.long 0x8 "MRC0_NSE_RGN_CLR,MRC NonSecure Enable Region Clear" hexmask.long.word 0x8 0.--15. 1. "W1CLR,Write-1 Clear" line.long 0xC "MRC0_NSE_RGN_CLR_ALL,MRC NonSecure Enable Region Clear All" hexmask.long.word 0xC 16.--31. 1. "DID_SEL,DID Select" line.long 0x10 "MRC0_GLBAC0,MRC Global Access Control" bitfld.long 0x10 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x10 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x10 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x10 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x10 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x10 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x10 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x10 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x10 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x10 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x14 "MRC0_GLBAC1,MRC Global Access Control" bitfld.long 0x14 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x14 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x14 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x14 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x14 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x14 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x14 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x14 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x14 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x14 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x14 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x18 "MRC0_GLBAC2,MRC Global Access Control" bitfld.long 0x18 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x18 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x18 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x18 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x18 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x18 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x18 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x18 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x18 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x18 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x18 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x1C "MRC0_GLBAC3,MRC Global Access Control" bitfld.long 0x1C 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x1C 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x1C 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x1C 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x1C 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x1C 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x1C 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x1C 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x1C 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x1C 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x1C 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x20 "MRC0_GLBAC4,MRC Global Access Control" bitfld.long 0x20 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x20 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x20 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x20 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x20 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x20 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x20 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x20 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x20 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x20 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x20 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x24 "MRC0_GLBAC5,MRC Global Access Control" bitfld.long 0x24 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x24 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x24 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x24 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x24 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x24 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x24 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x24 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x24 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x24 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x24 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x28 "MRC0_GLBAC6,MRC Global Access Control" bitfld.long 0x28 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x28 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x28 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x28 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x28 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x28 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x28 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x28 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x28 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x28 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x28 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x2C "MRC0_GLBAC7,MRC Global Access Control" bitfld.long 0x2C 31. "LK,LOCK" "0: This register is not locked and can be altered.,1: This register is locked (read-only) and cannot.." newline bitfld.long 0x2C 14. "SPR,SecurePriv Read" "0: Read access is not allowed in Secure Privilege..,1: Read access is allowed in Secure Privilege mode." newline bitfld.long 0x2C 13. "SPW,SecurePriv Write" "0: Write access is not allowed in Secure Privilege..,1: Write access is allowed in Secure Privilege mode." newline bitfld.long 0x2C 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x2C 10. "SUR,SecureUser Read" "0: Read access is not allowed in Secure User mode.,1: Read access is allowed in Secure User mode." newline bitfld.long 0x2C 9. "SUW,SecureUser Write" "0: Write access is not allowed in Secure User mode.,1: Write access is allowed in Secure User mode." newline bitfld.long 0x2C 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User mode.,1: Execute access is allowed in Secure User mode." newline bitfld.long 0x2C 6. "NPR,NonsecurePriv Read" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 5. "NPW,NonsecurePriv Write" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure Privilege.." newline bitfld.long 0x2C 2. "NUR,NonsecureUser Read" "0: Read access is not allowed in Nonsecure User mode.,1: Read access is allowed in Nonsecure User mode." newline bitfld.long 0x2C 1. "NUW,NonsecureUser Write" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode." newline bitfld.long 0x2C 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure User..,1: Execute access is allowed in Nonsecure User mode." line.long 0x30 "MRC0_DOM0_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM0_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM0_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM0_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" line.long 0x40 "MRC0_DOM0_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x40 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x40 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x44 "MRC0_DOM0_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x44 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x44 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x44 0. "VLD,Valid" "0,1" line.long 0x48 "MRC0_DOM0_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x48 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x48 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4C "MRC0_DOM0_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4C 0. "VLD,Valid" "0,1" line.long 0x50 "MRC0_DOM0_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x50 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x50 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x54 "MRC0_DOM0_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x54 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x54 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x54 0. "VLD,Valid" "0,1" line.long 0x58 "MRC0_DOM0_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x58 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x58 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x5C "MRC0_DOM0_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x5C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x5C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x5C 0. "VLD,Valid" "0,1" line.long 0x60 "MRC0_DOM0_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x60 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x60 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x64 "MRC0_DOM0_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x64 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x64 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x64 0. "VLD,Valid" "0,1" line.long 0x68 "MRC0_DOM0_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x68 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x68 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x6C "MRC0_DOM0_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x6C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x6C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x6C 0. "VLD,Valid" "0,1" group.long 0x140C0++0x3 line.long 0x0 "MRC0_DOM0_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14140++0x3F line.long 0x0 "MRC0_DOM1_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM1_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM1_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM1_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM1_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM1_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM1_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM1_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM1_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM1_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM1_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM1_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM1_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM1_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM1_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM1_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x141C0++0x3 line.long 0x0 "MRC0_DOM1_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14240++0x3F line.long 0x0 "MRC0_DOM2_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM2_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM2_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM2_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM2_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM2_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM2_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM2_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM2_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM2_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM2_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM2_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM2_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM2_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM2_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM2_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x142C0++0x3 line.long 0x0 "MRC0_DOM2_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14340++0x3F line.long 0x0 "MRC0_DOM3_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM3_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM3_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM3_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM3_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM3_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM3_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM3_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM3_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM3_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM3_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM3_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM3_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM3_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM3_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM3_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x143C0++0x3 line.long 0x0 "MRC0_DOM3_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14440++0x3F line.long 0x0 "MRC0_DOM4_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM4_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM4_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM4_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM4_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM4_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM4_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM4_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM4_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM4_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM4_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM4_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM4_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM4_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM4_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM4_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x144C0++0x3 line.long 0x0 "MRC0_DOM4_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14540++0x3F line.long 0x0 "MRC0_DOM5_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM5_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM5_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM5_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM5_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM5_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM5_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM5_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM5_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM5_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM5_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM5_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM5_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM5_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM5_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM5_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x145C0++0x3 line.long 0x0 "MRC0_DOM5_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14640++0x3F line.long 0x0 "MRC0_DOM6_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM6_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM6_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM6_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM6_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM6_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM6_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM6_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM6_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM6_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM6_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM6_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM6_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM6_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM6_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM6_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x146C0++0x3 line.long 0x0 "MRC0_DOM6_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14740++0x3F line.long 0x0 "MRC0_DOM7_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM7_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM7_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM7_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM7_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM7_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM7_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM7_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM7_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM7_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM7_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM7_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM7_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM7_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM7_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM7_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x147C0++0x3 line.long 0x0 "MRC0_DOM7_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14840++0x3F line.long 0x0 "MRC0_DOM8_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM8_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM8_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM8_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM8_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM8_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM8_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM8_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM8_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM8_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM8_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM8_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM8_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM8_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM8_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM8_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x148C0++0x3 line.long 0x0 "MRC0_DOM8_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14940++0x3F line.long 0x0 "MRC0_DOM9_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM9_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM9_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM9_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM9_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM9_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM9_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM9_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM9_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM9_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM9_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM9_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM9_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM9_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM9_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM9_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x149C0++0x3 line.long 0x0 "MRC0_DOM9_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14A40++0x3F line.long 0x0 "MRC0_DOM10_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM10_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM10_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM10_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM10_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM10_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM10_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM10_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM10_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM10_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM10_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM10_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM10_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM10_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM10_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM10_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x14AC0++0x3 line.long 0x0 "MRC0_DOM10_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14B40++0x3F line.long 0x0 "MRC0_DOM11_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM11_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM11_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM11_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM11_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM11_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM11_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM11_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM11_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM11_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM11_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM11_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM11_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM11_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM11_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM11_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x14BC0++0x3 line.long 0x0 "MRC0_DOM11_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14C40++0x3F line.long 0x0 "MRC0_DOM12_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM12_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM12_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM12_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM12_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM12_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM12_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM12_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM12_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM12_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM12_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM12_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM12_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM12_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM12_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM12_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x14CC0++0x3 line.long 0x0 "MRC0_DOM12_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14D40++0x3F line.long 0x0 "MRC0_DOM13_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM13_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM13_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM13_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM13_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM13_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM13_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM13_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM13_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM13_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM13_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM13_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM13_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM13_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM13_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM13_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x14DC0++0x3 line.long 0x0 "MRC0_DOM13_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14E40++0x3F line.long 0x0 "MRC0_DOM14_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM14_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM14_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM14_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM14_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM14_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM14_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM14_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM14_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM14_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM14_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM14_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM14_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM14_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM14_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM14_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x14EC0++0x3 line.long 0x0 "MRC0_DOM14_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." group.long 0x14F40++0x3F line.long 0x0 "MRC0_DOM15_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x0 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x0 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x4 "MRC0_DOM15_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x4 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x4 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x4 0. "VLD,Valid" "0,1" line.long 0x8 "MRC0_DOM15_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x8 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x8 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0xC "MRC0_DOM15_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0xC 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0xC 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "MRC0_DOM15_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x10 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x10 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x14 "MRC0_DOM15_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x14 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x14 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x14 0. "VLD,Valid" "0,1" line.long 0x18 "MRC0_DOM15_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x18 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x18 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x1C "MRC0_DOM15_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x1C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x1C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x1C 0. "VLD,Valid" "0,1" line.long 0x20 "MRC0_DOM15_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x20 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x20 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x24 "MRC0_DOM15_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x24 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x24 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x24 0. "VLD,Valid" "0,1" line.long 0x28 "MRC0_DOM15_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x28 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x28 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x2C "MRC0_DOM15_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x2C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x2C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x2C 0. "VLD,Valid" "0,1" line.long 0x30 "MRC0_DOM15_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x30 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x30 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x34 "MRC0_DOM15_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x34 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x34 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x34 0. "VLD,Valid" "0,1" line.long 0x38 "MRC0_DOM15_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x38 14.--31. 1. "STRT_ADDR,Start Address" newline bitfld.long 0x38 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" line.long 0x3C "MRC0_DOM15_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x3C 14.--31. 1. "END_ADDR,End Address" newline bitfld.long 0x3C 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x3C 0. "VLD,Valid" "0,1" group.long 0x14FC0++0x3 line.long 0x0 "MRC0_DOM15_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x0 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x0 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region r are based on..,1: Secure accesses to region r are not allowed.." tree.end endif tree "CACHE_ECC_MCM" base ad:0x44401000 group.long 0x0++0x3 line.long 0x0 "CACHE_ECCR,CACHE ECC Control Register" bitfld.long 0x0 1. "RECC_DIS,Disable Cache ECC Read Check" "0: Enable ECC check on CACHE read data,1: Disable ECC check on CACHE read data" newline bitfld.long 0x0 0. "WECC_DIS,Disable CACHE ECC Write Generation" "0: Enable ECC generation on CACHE write data,1: Disable ECC generation on CACHE write data" group.long 0x20++0xB line.long 0x0 "INT_STATUS,Interrupt Status Register" eventfld.long 0x0 15. "SYSTEM_CACHE_ECC_ERRS_OVER_INT,SYSTEM CACHE access more than one multi-bit ECC Error Interrupt Status" "0: SYSTEM CACHE more than single-bit ECC error does..,1: SYSTEM CACHE more than single-bit ECC error.." newline eventfld.long 0x0 14. "SYSTEM_CACHE_ECC_ERRM_OVER_INT,SYSTEM CACHE access more than one multi-bit ECC Error Interrupt Status" "0: SYSTEM CACHE more than one multi-bit ECC error..,1: SYSTEM CACHE more than one multi-bit ECC error.." newline eventfld.long 0x0 13. "SYSTEM_CACHE_ECC_ERRS_INT,SYSTEM CACHE access single-bit ECC Error Interrupt Status" "0: SYSTEM CACHE single-bit ECC error does not happen,1: SYSTEM CACHE single-bit ECC error happens." newline eventfld.long 0x0 12. "SYSTEM_CACHE_ECC_ERRM_INT,SYSTEM CACHE access multi-bit ECC Error Interrupt Status" "0: SYSTEM CACHE multi-bit ECC error does not happen,1: SYSTEM CACHE multi-bit ECC error happens." newline eventfld.long 0x0 11. "CODE_CACHE_ECC_ERRS_OVER_INT,CODE CACHE access more than one single-bit ECC Error Interrupt Status" "0: CODE CACHE more than one single-bit ECC error..,1: CODE CACHE more than one single-bit ECC error.." newline eventfld.long 0x0 10. "CODE_CACHE_ECC_ERRM_OVER_INT,CODE CACHE access more than one multi-bit ECC Error Interrupt Status" "0: CODE CACHE more than one multi-bit ECC error..,1: CODE CACHE more than one multi-bit ECC error.." newline eventfld.long 0x0 9. "CODE_CACHE_ECC_ERRS_INT,CODE CACHE access single-bit ECC Error Interrupt Status" "0: CODE CACHE single-bit ECC error does not happen,1: CODE CACHE single-bit ECC error happens." newline eventfld.long 0x0 8. "CODE_CACHE_ECC_ERRM_INT,CODE CACHE Access multi-bit ECC Error Interrupt Status" "0: CODE CACHE multi-bit ECC error does not happen,1: CODE CACHE multi-bit ECC error happens." line.long 0x4 "INT_STAT_EN,Interrupt Status Enable Register" bitfld.long 0x4 15. "SYSTEM_CACHE_ECC_ERRS_OVER_INT_EN,SYSTEM CACHE Access more than one single bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 14. "SYSTEM_CACHE_ECC_ERRM_OVER_INT_EN,SYSTEM CACHE Access more than one multi bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 13. "SYSTEM_CACHE_ECC_ERRS_INT_EN,SYSTEM CACHE Access single bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 12. "SYSTEM_CACHE_ECC_ERRM_INT_EN,SYSTEM CACHE Access multi bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 11. "CODE_CACHE_ERRS_OVER_INT_EN,CODE CACHE Access more than single bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 10. "CODE_CACHE_ERRM_OVER_INT_EN,CODE CACHE Access more than multi bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 9. "CODE_CACHE_ERRS_INT_EN,CODE CACHE Access single bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 8. "CODE_CACHE_ERRM_INT_EN,CODE CACHE Access multi bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" line.long 0x8 "INT_SIG_EN,Interrupt Enable Register" bitfld.long 0x8 15. "SYSTEM_CACHE_ERRS_OVER_INT_SIG_EN,SYSTEM CACHE Access single bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 14. "SYSTEM_CACHE_ERRM_OVER_INT_SIG_EN,SYSTEM CACHE Access more than one multi bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 13. "SYSTEM_CACHE_ERRS_INT_SIG_EN,SYSTEM CACHE Access single bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 12. "SYSTEM_CACHE_ERRM_INT_SIG_EN,SYSTEM CACHE Access multi bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 11. "CODE_CACHE_ERRS_OVER_INT_SIG_EN,CODE CACHE Access more than one single bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 10. "CODE_CACHE_ERRM_OVER_INT_SIG_EN,CODE CACHE Access more than one multi bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 9. "CODE_CACHE_ERRS_INT_SIG_EN,CODE CACHE Access single bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 8. "CODE_CACHE_ERRM_INT_SIG_EN,CODE CACHE Access multi bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" rgroup.long 0x5C++0x7 line.long 0x0 "CODE_CACHE_ECC_SINGLE_ERROR_INFO,CODE CACHE single bit ECC Error Information Register" hexmask.long.byte 0x0 16.--22. 1. "CODE_CACHE_ECCS_EFSYN,CODE CACHE single bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--13. 1. "CODE_CACHE_ECCS_EFPRT,CODE CACHE single bit ECC error protection field" newline hexmask.long.byte 0x0 4.--7. 1. "CODE_CACHE_ECCS_EFMST,CODE CACHE single bit ECC error master number" newline bitfld.long 0x0 1. "CODE_CACHE_ECCS_CMD,CODE CACHE single bit ECC error on cache command" "0: No single bit ECC error on cache command.,1: Single bit ECC error occurs on cache command." newline bitfld.long 0x0 0. "CODE_CACHE_ECCS_TAG,CODE CACHE single bit ECC error" "0: tag,1: data" line.long 0x4 "CODE_CACHE_ECC_SINGLE_ERROR_ADDR,CODE_CACHE single-bit ECC Error Address Register" hexmask.long 0x4 0.--31. 1. "CODE_CACHE_ECCS_ERRED_ADDR,CODE CACHE single-bit ECC error address" rgroup.long 0x68++0x3 line.long 0x0 "CODE_CACHE_ECC_MULTI_ERROR_INFO,CODE CACHE multi-bit ECC Error Information Register" hexmask.long.byte 0x0 16.--22. 1. "CODE_CACHE_ECCM_EFSYN,CODE CACHE multi-bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--13. 1. "CODE_CACHE_ECCM_EFPRT,CODE CACHE multi-bit ECC error protection field" newline hexmask.long.byte 0x0 4.--7. 1. "CODE_CACHE_ECCM_EFMST,CODE CACHE multi-bit ECC error master number" newline bitfld.long 0x0 1. "CODE_CACHE_ECCM_CMD,CODE CACHE multiple bit ECC error on code cache command" "0: No multi bit ECC error on cache command.,1: Multi bit ECC error on cache command." newline bitfld.long 0x0 0. "CODE_CACHE_ECCM_TAG,CODE CACHE multiple bit ECC error" "0: tag,1: data" rgroup.long 0x74++0x7 line.long 0x0 "SYSTEM_CACHE_ECC_SINGLE_ERROR_INFO,SYSTEM CACHE single bit ECC Error Information Register" hexmask.long.byte 0x0 16.--22. 1. "SYSTEM_CACHE_ECCS_EFSYN,SYSTEM CACHE single bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--13. 1. "SYSTEM_CACHE_ECCS_EFPRT,SYSTEM CACHE single bit ECC error protection field" newline hexmask.long.byte 0x0 4.--7. 1. "SYSTEM_CACHE_ECCS_EFMST,SYSTEM CACHE single bit ECC error master number" newline bitfld.long 0x0 1. "SYSTEM_CACHE_ECCS_CMD,SYSTEM CACHE single bit ECC error on cache command" "0: No single bit ECC error on cache command.,1: Single bit ECC error on cache command." newline bitfld.long 0x0 0. "SYSTEM_CACHE_ECCS_TAG,SYSTEM CACHE single bit ECC error" "0: tag,1: data" line.long 0x4 "SYSTEM_CACHE_ECC_SINGLE_ERROR_ADDR,SYSTEM_CACHE single-bit ECC Error Address Register" hexmask.long 0x4 0.--31. 1. "SYSTEM_CACHE_ECCS_ERRED_ADDR,SYSTEM CACHE single-bit ECC error address" rgroup.long 0x80++0x7 line.long 0x0 "SYSTEM_CACHE_ECC_MULTI_ERROR_INFO,SYSTEM CACHE multi-bit ECC Error Information Register" hexmask.long.byte 0x0 16.--22. 1. "SYSTEM_CACHE_ECCM_EFSYN,SYSTEM CACHE multi-bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--13. 1. "SYSTEM_CACHE_ECCM_EFPRT,SYSTEM CACHE multi-bit ECC error protection field" newline hexmask.long.byte 0x0 4.--7. 1. "SYSTEM_CACHE_ECCM_EFMST,SYSTEM CACHE multi-bit ECC error master number" newline bitfld.long 0x0 1. "SYSTEM_CACHE_ECCM_CMD,SYSTEM CACHE multiple bit ECC error on SYSTEM CACHE command" "0: No multi bit ECC error on cache command.,1: Multi bit ECC error on cache command." newline bitfld.long 0x0 0. "SYSTEM_CACHE_ECCM_TAG,SYSTEM CACHE multiple bit ECC error" "0: tag,1: data" line.long 0x4 "SYSTEM_CACHE_ECC_MULTI_ERROR_DATA,SYSTEM CACHE multi-bit ECC Error Data Register" hexmask.long 0x4 0.--31. 1. "SYSTEM_CACHE_ECCM_ERRED_DATA,SYSTEM CACHE multi-bit ECC error data" group.long 0x8C++0x1F line.long 0x0 "CODE_CACHE_TAG0_ECC_ERROR_INJEC,CODE CACHE TAG0 ECC Error Injection Register" bitfld.long 0x0 19. "CODE_CACHE_TAG0_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on CODE CACHE TAG0 write access" "0,1" newline bitfld.long 0x0 18. "CODE_CACHE_TAG0_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on CODE CACHE TAG0 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x0 17. "CODE_CACHE_TAG0_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on CODE CACHE TAG0 write access" "0,1" newline bitfld.long 0x0 16. "CODE_CACHE_TAG0_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on CODE CACHE TAG0 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x0 8.--14. 1. "CODE_CACHE_TAG0_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error." newline hexmask.long.byte 0x0 0.--6. 1. "CODE_CACHE_TAG0_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0x4 "CODE_CACHE_TAG1_ECC_ERROR_INJEC,CODE CACHE TAG1 ECC Error Injection Register" bitfld.long 0x4 19. "CODE_CACHE_TAG1_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on CODE CACHE TAG1 write access" "0,1" newline bitfld.long 0x4 18. "CODE_CACHE_TAG1_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on CODE_CACHE_TAG1 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x4 17. "CODE_CACHE_TAG1_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on CODE CACHE TAG1 write access" "0,1" newline bitfld.long 0x4 16. "CODE_CACHE_TAG1_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on CODE CACHE TAG1 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x4 8.--14. 1. "CODE_CACHE_TAG1_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error." newline hexmask.long.byte 0x4 0.--6. 1. "CODE_CACHE_TAG1_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0x8 "CODE_CACHE_DATA0_ECC_ERROR_INJEC,CODE CACHE DATA0 ECC Error Injection Register" bitfld.long 0x8 19. "CODE_CACHE_DATA0_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on CODE_CACHE_DATA0 write access" "0,1" newline bitfld.long 0x8 18. "CODE_CACHE_DATA0_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on CODE CACHE DATA0 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x8 17. "CODE_CACHE_DATA0_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on CODE CACHE DATA0 write access" "0,1" newline bitfld.long 0x8 16. "CODE_CACHE_DATA0_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on CODE CACHE DATA0 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x8 8.--14. 1. "CODE_CACHE_DATA0_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error" newline hexmask.long.byte 0x8 0.--6. 1. "CODE_CACHE_DATA0_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0xC "CODE_CACHE_DATA1_ECC_ERROR_INJEC,CODE CACHE DATA1 ECC Error Injection Register" bitfld.long 0xC 19. "CODE_CACHE_DATA1_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on CODE CACHE DATA1 write access" "0,1" newline bitfld.long 0xC 18. "CODE_CACHE_DATA1_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on CODE CACHE DATA1 write access" "?,1: Bit Data Inversions" newline bitfld.long 0xC 17. "CODE_CACHE_DATA1_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on CODE CACHE DATA1 write access" "0,1" newline bitfld.long 0xC 16. "CODE_CACHE_DATA1_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on CODE CACHE DATA1 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0xC 8.--14. 1. "CODE_CACHE_DATA1_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error" newline hexmask.long.byte 0xC 0.--6. 1. "CODE_CACHE_DATA1_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection" line.long 0x10 "SYTEM_CACHE_TAG0_ECC_ERROR_INJEC,SYSTEM CACHE TAG0 ECC Error Injection Register" bitfld.long 0x10 19. "SYSTEM_CACHE_TAG0_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on CODE CACHE TAG0 write access" "0,1" newline bitfld.long 0x10 18. "SYSTEM_CACHE_TAG0_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on CODE CACHE TAG0 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x10 17. "SYSTEM_CACHE_TAG0_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on SYSTEM CACHE TAG0 write access" "0,1" newline bitfld.long 0x10 16. "SYSTEM_CACHE_TAG0_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on SYSTEM CACHE TAG0 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x10 8.--14. 1. "SYSTEM_CACHE_TAG0_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error." newline hexmask.long.byte 0x10 0.--6. 1. "SYSTEM_CACHE_TAG0_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0x14 "SYSTEM_CACHE_TAG1_ECC_ERROR_INJEC,SYSTEM CACHE TAG1 ECC Error Injection Register" bitfld.long 0x14 19. "SYSTEM_CACHE_TAG1_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on SYSTEM CACHE TAG1 write access" "0,1" newline bitfld.long 0x14 18. "SYSTEM_CACHE_TAG1_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on SYSTEM_CACHE_TAG1 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x14 17. "SYSTEM_CACHE_TAG1_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on SYSTEM CACHE TAG1 write access" "0,1" newline bitfld.long 0x14 16. "SYSTEM_CACHE_TAG1_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on SYSTEM CACHE TAG1 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x14 8.--14. 1. "SYSTEMCACHE_TAG1_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error." newline hexmask.long.byte 0x14 0.--6. 1. "SYSTEM_CACHE_TAG1_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0x18 "SYSTEM_CACHE_DATA0_ECC_ERROR_INJEC,SYSTEM CACHE DATA0 ECC Error Injection Register" bitfld.long 0x18 19. "SYSTEM_CACHE_DATA0_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on SYSTEM CACHE DATA0 write access" "0,1" newline bitfld.long 0x18 18. "SYSTEM_CACHE_DATA0_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on SYSTEM CACHE DATA0 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x18 17. "SYSTEM_CACHE_DATA0_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on SYSTEM CACHE DATA0 write access" "0,1" newline bitfld.long 0x18 16. "SYSTEM_CACHE_DATA0_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on SYSTEM CACHE DATA0 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x18 8.--14. 1. "SYSTEM_CACHE_DATA0_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error" newline hexmask.long.byte 0x18 0.--6. 1. "SYSTEM_CACHE_DATA0_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0x1C "STSTEM_CACHE_DATA1_ECC_ERROR_INJEC,SYSTEM CACHE DATA1 ECC Error Injection Register" bitfld.long 0x1C 19. "SYSTEM_CACHE_DATA1_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on SYSTEM CACHE DATA1 write access" "0,1" newline bitfld.long 0x1C 18. "SYSTEM_CACHE_DATA1_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on SYSTEM CACHE DATA1 write access" "?,1: Bit Data Inversions" newline bitfld.long 0x1C 17. "SYSTEM_CACHE_DATA1_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on SYSTEM CACHE DATA1 write access" "0,1" newline bitfld.long 0x1C 16. "SYSTEM_CACHE_DATA1_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on SYSTEM CACHE DATA1 write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x1C 8.--14. 1. "SYSTEM_CACHE_DATA1_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error" newline hexmask.long.byte 0x1C 0.--6. 1. "SYSTEM_CACHE_DATA1_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection" tree.end tree "SYS_CTR" tree "SYS_CTR_COMPARE" base ad:0x442A0000 group.long 0x20++0x7 line.long 0x0 "CMPCVL0,Compare Count Value Low Register" hexmask.long 0x0 0.--31. 1. "CMPCV0,Compare Count Value bits [31:0]" line.long 0x4 "CMPCVH0,Compare Count Value High Register" hexmask.long.tbyte 0x4 0.--23. 1. "CMPCV1,Compare Count Value bits [55:32]" group.long 0x2C++0x3 line.long 0x0 "CMPCR0,Compare Control Register" rbitfld.long 0x0 2. "ISTAT,Interrupt Status" "0: Counter value is less than the compare value or..,1: Counter value is greater than or equal to the.." bitfld.long 0x0 1. "IMASK,Interrupt Request Mask" "0: Interrupt output signal is not masked.,1: Interrupt output signal is masked." bitfld.long 0x0 0. "EN,Enable" "0: Compare disabled,1: Compare enabled" group.long 0x120++0x7 line.long 0x0 "CMPCVL1,Compare Count Value Low Register" hexmask.long 0x0 0.--31. 1. "CMPCV0,Compare Count Value bits [31:0]" line.long 0x4 "CMPCVH1,Compare Count Value High Register" hexmask.long.tbyte 0x4 0.--23. 1. "CMPCV1,Compare Count Value bits [55:32]" group.long 0x12C++0x3 line.long 0x0 "CMPCR1,Compare Control Register" rbitfld.long 0x0 2. "ISTAT,Interrupt Status" "0: Counter value is less than the compare value or..,1: Counter value is greater than or equal to the.." bitfld.long 0x0 1. "IMASK,Interrupt Request Mask" "0: Interrupt output signal is not masked.,1: Interrupt output signal is masked." bitfld.long 0x0 0. "EN,Enable" "0: Compare disabled,1: Compare enabled" rgroup.long 0xFD0++0x3 line.long 0x0 "CNTID0,Counter ID Register" hexmask.long 0x0 0.--31. 1. "CNTID,Counter Identification" tree.end tree "SYS_CTR_CONTROL" base ad:0x44290000 group.long 0x0++0x3 line.long 0x0 "CNTCR,Counter Control Register" bitfld.long 0x0 9. "FCR1,Frequency Change Request ID 1" "0: No change.,1: Select frequency modes table entry 1 the base.." bitfld.long 0x0 8. "FCR0,Frequency Change Request ID 0" "0: No change.,1: Select frequency modes table entry 0 the base.." newline bitfld.long 0x0 1. "HDBG,Enable Debug Halt" "0: The assertion of the debug input is ignored.,1: The assertion of the debug input causes the.." bitfld.long 0x0 0. "EN,Enable Counting" "0: Counter disabled,1: Counter enabled" rgroup.long 0x4++0x3 line.long 0x0 "CNTSR,Counter Status Register" bitfld.long 0x0 9. "FCA1,Frequency Change Acknowledge ID 1" "0: Base frequency is not selected.,1: Base frequency is selected." bitfld.long 0x0 8. "FCA0,Frequency Change Acknowledge ID 0" "0: Base frequency is not selected.,1: Base frequency is selected." newline bitfld.long 0x0 0. "DBGH,Debug Halt" "0: Counter is not halted by debug.,1: Counter is halted by debug." group.long 0x8++0x7 line.long 0x0 "CNTCV0,Counter Count Value Low Register" hexmask.long 0x0 0.--31. 1. "CNTCV0,Counter Count Value bits [31:0]" line.long 0x4 "CNTCV1,Counter Count Value High Register" hexmask.long.tbyte 0x4 0.--23. 1. "CNTCV1,Counter Count Value bits [55:32]" rgroup.long 0x20++0xB line.long 0x0 "CNTFID0,Frequency Modes Table 0 Register" hexmask.long 0x0 0.--31. 1. "CNTFID0,Counter Frequency ID 0" line.long 0x4 "CNTFID1,Frequency Modes Table 1 Register" hexmask.long 0x4 0.--31. 1. "CNTFID1,Counter Frequency ID 1" line.long 0x8 "CNTFID2,Frequency Modes Table 2 Register" hexmask.long 0x8 0.--31. 1. "CNTFID2,Counter Frequency ID 2" group.long 0xC0++0x3 line.long 0x0 "CNTCR2,Counter Control Register 2" bitfld.long 0x0 0. "HWFC_EN,Hardware Frequency Change Enable" "0: No effect on the SYS_CTR behavior,1: Used to perform the same frequency change.." rgroup.long 0xFD0++0x3 line.long 0x0 "CNTID0,Counter ID Register" hexmask.long 0x0 0.--31. 1. "CNTID,Counter Identification" tree.end tree "SYS_CTR_READ" base ad:0x442B0000 rgroup.long 0x8++0x7 line.long 0x0 "CNTCV0,Counter Count Value Low Register" hexmask.long 0x0 0.--31. 1. "CNTCV0,Counter Count Value bits [31:0]" line.long 0x4 "CNTCV1,Counter Count Value High Register" hexmask.long.tbyte 0x4 0.--23. 1. "CNTCV1,Counter Count Value bits [55:32]" rgroup.long 0xFD0++0x3 line.long 0x0 "CNTID0,Counter ID Register" hexmask.long 0x0 0.--31. 1. "CNTID,Counter Identification" tree.end tree.end tree.end tree "BBSM_BBNSM" base ad:0x44440000 rgroup.long 0x0++0x7 line.long 0x0 "BBNSM_VID,BBNSM Version ID Register" hexmask.long.byte 0x0 16.--23. 1. "BBNSM_VID,BBNSM Version ID" hexmask.long.byte 0x0 8.--15. 1. "BBNSM_REV,BBNSM Revision" newline hexmask.long.byte 0x0 0.--7. 1. "BBNSM_IPID,BBNSM IP ID" line.long 0x4 "BBNSM_FEATURES,BBNSM Features Register" hexmask.long.byte 0x4 2.--7. 1. "GPR_SZ,GPR Register Array Size" group.long 0x8++0x3 line.long 0x0 "BBNSM_CTRL,BBNSM Control Register" bitfld.long 0x0 26.--28. "BTN_CONFIG,Button Configuration." "0: Button signal is active high,1: Button signal is active low,2: Button signal is active on the falling edge,3: Button signal is active on the rising edge,4: Button signal is active on any edge,?,?,?" bitfld.long 0x0 25. "TOSP,Turn Off System Power" "0: Leave system power on.,1: Turn off system power when Dumb PMIC is enabled." newline bitfld.long 0x0 24. "DP_EN,Dumb PMIC Enable" "0: Smart PMIC is enabled.,1: Dumb PMIC is enabled." bitfld.long 0x0 23. "PK_OVR,PMIC On Request Override" "0: PMIC On Request Override is disabled.,1: PMIC On Request Override is enabled." newline bitfld.long 0x0 22. "PK_EN,PMIC On Request Enable" "0: PMIC On Request is disabled.,1: PMIC On Request is enabled." bitfld.long 0x0 20.--21. "TURN_ON_TIME,Turn-On Time" "0: 500 milliseconds.,1: 50 milliseconds.,2: 100 milliseconds.,3: 0 milliseconds." newline bitfld.long 0x0 18.--19. "DEBOUNCE,Debounce Time" "0: 50 milliseconds.,1: 100 milliseconds.,2: 500 milliseconds.,3: 0 milliseconds." bitfld.long 0x0 16.--17. "BTN_TIMEOUT,Button Press Timeout" "0: 5 seconds.,1: 10 seconds.,2: 15 seconds.,3: Timeout disabled. Long button presses will not.." newline hexmask.long.byte 0x0 8.--12. 1. "CAL_VAL,Calibration Value" bitfld.long 0x0 4. "CAL_EN,Calibration Enable" "0: RTC Time calibration is disabled.,1: RTC Time calibration is enabled." newline bitfld.long 0x0 2.--3. "TA_EN,Time Alarm Enable" "?,1: Disable the time alarm.,2: Enable the time alarm. A time alarm event occurs..,?" bitfld.long 0x0 0.--1. "RTC_EN,Real-Time Counter Enable" "?,1: Disable the real-time counter.,2: Enable the real-time counter.,?" group.long 0x10++0x7 line.long 0x0 "BBNSM_INT_EN,BBNSM Interrupt Enable Register" bitfld.long 0x0 4. "BTN_INT_EN,Button Interrupt Enable" "0: Interrupt Disabled,1: Interrupt Enabled" bitfld.long 0x0 2.--3. "TA_INT_EN,Time Alarm Interrupt Enable" "?,1: Do not issue an interrupt when RTC has reached..,2: Issue an interrupt when RTC has reached alarm..,?" newline bitfld.long 0x0 0.--1. "RTC_INT_EN,Real-Time Counter Rollover Interrupt Enable" "?,1: Do not issue an interrupt when RTC has rolled..,2: Issue an interrupt when RTC has rolled over.,?" line.long 0x4 "BBNSM_EVENTS,BBNSM Events Register" eventfld.long 0x4 8. "BI,Button Interrupt" "0,1" rbitfld.long 0x4 7. "BTN,Button" "0: BTN not pressed,1: BTN pressed" newline eventfld.long 0x4 6. "PWR_ON,Set Power On Event" "0: The power on interrupt has not been requested.,1: The power on interrupt has been requested." eventfld.long 0x4 5. "PWR_OFF,Set Power Off Event" "0: The power off interrupt has not been requested.,1: The power off interrupt has been requested." newline eventfld.long 0x4 4. "EMG_OFF,Emergency Off Event" "0: An emergency power off has not been requested.,1: An emergency power off has been requested." bitfld.long 0x4 2.--3. "TA,Time Alarm Event" "?,1: The real-time counter has not reached the alarm..,2: The real-time counter has reached the alarm time.,?" newline bitfld.long 0x4 0.--1. "RTC_ROLL,Real-Time Counter Rollover Event" "?,1: The real-time counter has not rolled over.,2: The real-time counter has rolled over.,?" group.long 0x24++0x3 line.long 0x0 "BBNSM_PAD_CTRL,BBNSM External Pad Control Register" bitfld.long 0x0 15. "PAD_CTRL15,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 14. "PAD_CTRL14,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 13. "PAD_CTRL13,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 12. "PAD_CTRL12,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 11. "PAD_CTRL11,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 10. "PAD_CTRL10,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 9. "PAD_CTRL9,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 8. "PAD_CTRL8,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 7. "PAD_CTRL7,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 6. "PAD_CTRL6,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 5. "PAD_CTRL5,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 4. "PAD_CTRL4,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 3. "PAD_CTRL3,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 2. "PAD_CTRL2,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" newline bitfld.long 0x0 1. "PAD_CTRL1,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" bitfld.long 0x0 0. "PAD_CTRL0,Control I/O Pads" "0: Deasserts bit n in bbnsm_pad_ctrl[n],1: Assert bit n in bbnsm_pad_ctrl[n]" group.long 0x40++0x7 line.long 0x0 "BBNSM_RTC_LS,BBNSM Real-Time Counter LS Register" hexmask.long 0x0 0.--31. 1. "RTC,Real-time Counter" line.long 0x4 "BBNSM_RTC_MS,BBNSM Real-Time Counter MS Register" hexmask.long.word 0x4 0.--14. 1. "RTC,Real-Time Counter" group.long 0x50++0x3 line.long 0x0 "BBNSM_TA,BBNSM Time Alarm Register" hexmask.long 0x0 0.--31. 1. "TA,Time Alarm Value" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x300)++0x3 line.long 0x0 "GPR[$1],General Purpose Register Word word" hexmask.long 0x0 0.--31. 1. "GPR,32 bits of the GPR." repeat.end tree.end tree "BBSM_TCU" base ad:0x444E0000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" newline bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" tree.end tree "CAMERA (Camera Domain)" base ad:0x0 tree "CAMERA_BLK_CTRL_CAMERAMIX" base ad:0x4AC10000 group.long 0x0++0x17 line.long 0x0 "ISP_Clock_gating_control,ISP Clock gating control" bitfld.long 0x0 6. "ISP_ISP_clock,ISP clock gate control of the ISP" "0: Do not gate the ISP clock of the ISP,1: Gate the ISP clock of the ISP" newline bitfld.long 0x0 5. "ISP_Pixel_clock,Pixel clock gate control of the ISP" "0: Do not gate the Pixel clock of the ISP,1: Gate the Pixel clock of the ISP" newline bitfld.long 0x0 4. "ISP_AXI_clock,AXI clock gate control of the ISP" "0: Do not gate the AXI clock of the ISP,1: Gate the AXI clock of the ISP" newline bitfld.long 0x0 1. "CSI2_pixel_formatting_1,Pixel link clock gate control of the CSI2 pixel formatting 1 (Combo)" "0: Do not gate the Pixel link clock of the CSI2..,1: Gate the Pixel link clock of the CSI2 pixel.." newline bitfld.long 0x0 0. "CSI2_pixel_formatting_0,Pixel link clock gate control of the CSI2 pixel formatting 0 (Standalone)" "0: Do not gate the Pixel link clock of the CSI2..,1: Gate the Pixel link clock of the CSI2 pixel.." line.long 0x4 "ISP_AxCache_control,ISP AxCache control" hexmask.long.byte 0x4 8.--11. 1. "AwCache,Set the AXI AwCache signal for the AXI write master ports" newline hexmask.long.byte 0x4 0.--3. 1. "ArCache,Set the AXI ArCache signal for the AXI read master ports" line.long 0x8 "ISP_QoS_setting,ISP QoS setting" bitfld.long 0x8 12.--14. "Ar_local_panic_QoS,Set the AXI Hurry/Pressure QoS signal when the o_arpostqos of the AXI read port are set to '1'." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "ArQoS,Set the AXI ArQoS signal for all ISP AXI write ports." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "AwQoS,Set the AXI AwQoS signal for all ISP AXI write ports." "0,1,2,3,4,5,6,7" line.long 0xC "ISI_AxCache_control,ISI AxCache control" hexmask.long.byte 0xC 8.--11. 1. "AwCache,Set the AXI AwCache signal for the AXI write master ports" newline hexmask.long.byte 0xC 0.--3. 1. "ArCache,Set the AXI ArCache signal for the AXI read master ports" line.long 0x10 "ISI_QoS_setting,ISI QoS setting" bitfld.long 0x10 0.--2. "AwQoS,Set the AXI AwQoS signal for all ISI AXI write ports." "0,1,2,3,4,5,6,7" line.long 0x14 "Panic_Qos,ISI QoS setting" bitfld.long 0x14 0.--2. "Panic_QoS,Set the AXI Hurry AwQoS signal for all ISI and ISP AXI write ports when corresponding panic signals are active." "0,1,2,3,4,5,6,7" rgroup.long 0x18++0x3 line.long 0x0 "Init_pending_Tx,Init_pending_Tx" bitfld.long 0x0 9. "eDMA,eDMA pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 8. "CM0P,CM0P pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 7. "Write_V_ISI,Write_V_ISI pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 6. "Write_U_ISI,Write_U_ISI pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 5. "Write_Y_ISI,Write_Y_ISI pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 4. "Read_ISI,Read_ISI pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 3. "Write_AXI_ISP_1,Write_AXI_ISP_1 pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 2. "Write_AXI_ISP_0,Write_AXI_ISP_0 pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 1. "Read_AXI_ISP_1,Read_AXI_ISP_1 pending transaction" "0: No pending transaction,1: Pending transaction" newline bitfld.long 0x0 0. "Read_AXI_ISP_0,Read_AXI_ISP_0 pending transaction" "0: No pending transaction,1: Pending transaction" group.long 0x20++0x2B line.long 0x0 "CSI0_VC0_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x0 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x0 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x4 "CSI0_VC1_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x4 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x4 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x8 "CSI0_VC2_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x8 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x8 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xC "CSI0_VC3_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xC 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xC 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x10 "CSI0_VC4_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x10 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x10 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x14 "CSI0_VC5_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x14 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x14 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x18 "CSI0_VC6_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x18 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x18 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x1C "CSI0_VC7_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0x1C 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0x1C 0.--13. 1. "Odd_line_count,Odd line count" line.long 0x20 "CSI0_VC_interlaced_ctrl,CSI0 VC Interlaced Control" bitfld.long 0x20 14.--15. "CSI0_VC7_interlace_mode,CSI0 VC7 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 12.--13. "CSI0_VC6_interlace_mode,CSI0 VC6 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 10.--11. "CSI0_VC5_interlace_mode,CSI0 VC5 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 8.--9. "CSI0_VC4_interlace_mode,CSI0 VC4 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 6.--7. "CSI0_VC3_interlace_mode,CSI0 VC3 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 4.--5. "CSI0_VC2_interlace_mode,CSI0 VC2 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 2.--3. "CSI0_VC1_interlace_mode,CSI0 VC1 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0x20 0.--1. "CSI0_VC0_interlace_mode,CSI0 VC0 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." line.long 0x24 "CSI0_VC_Interlaced_error,CSI0 VC Interlaced Error" eventfld.long 0x24 7. "CSI0_VC7,CSI0 VC7 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 6. "CSI0_VC6,CSI0 VC6 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 5. "CSI0_VC5,CSI0 VC5 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 4. "CSI0_VC4,CSI0 VC4 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 3. "CSI0_VC3,CSI0 VC3 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 2. "CSI0_VC2,CSI0 VC2 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 1. "CSI0_VC1,CSI0 VC1 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0x24 0. "CSI0_VC0,CSI0 VC1 line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" line.long 0x28 "CSI0_YUV420_first_line_even,CSI0 YUV420 First Line Even" bitfld.long 0x28 7. "VC7,CSI0 VC7 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 6. "VC6,CSI0 VC6 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 5. "VC5,CSI0 VC5 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 4. "VC4,CSI0 VC4 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 3. "VC3,CSI0 VC3 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 2. "VC2,CSI0 VC2 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 1. "VC1,CSI0 VC1 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0x28 0. "VC0,CSI0 VC0 first line even" "0: First line is ODD,1: First line is EVEN" group.long 0x50++0x7 line.long 0x0 "CSI0_RAW32_CTR,CSI0 RAW32 Control" hexmask.long.byte 0x0 8.--15. 1. "CSI0_RAW_SWAP_MODE,Defines if a virtual channel is set in RAW SWAP mode when index corresponding to the virtual channel is set to '1'." newline bitfld.long 0x0 7. "CSI0_VC7_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 6. "CSI0_VC6_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 5. "CSI0_VC5_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 4. "CSI0_VC4_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 3. "CSI0_VC3_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 2. "CSI0_VC2_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 1. "CSI0_VC1_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 0. "CSI0_VC0_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" line.long 0x4 "CSI0_STREAM_FENCING_CTRL,Stream fencing control." hexmask.long.byte 0x4 8.--15. 1. "CSI0_Reset_Fencing_SM,SW reset of Fencing state machine. One per Virtual channel.[8] : Virtual channel 0...[15]: Virtual channel 7" newline hexmask.long.byte 0x4 0.--7. 1. "CSI0_Fencing_Control,[0] Fence VC0...[7] Fence VC7" rgroup.long 0x58++0x3 line.long 0x0 "CSI0_STREAM_FENCING_STATUS,Stream fencing status." hexmask.long.byte 0x0 0.--7. 1. "CSI0_Fencing_Status,Indicates when a virtual channel is fenced when set to '1'. [0] VC0 is fenced...[7] VC7 is fenced" group.long 0x60++0xEB line.long 0x0 "CSI0_NP_data_type_VC0,CSI0 VC0 non-pixel data type" hexmask.long.tbyte 0x0 0.--21. 1. "CSI0_VC0_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x4 "CSI0_NP_data_type_VC1,CSI0 VC1 non-pixel data type" hexmask.long.tbyte 0x4 0.--21. 1. "CSI0_VC1_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x8 "CSI0_NP_data_type_VC2,CSI0 VC2 non-pixel data type" hexmask.long.tbyte 0x8 0.--21. 1. "CSI0_VC2_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0xC "CSI0_NP_data_type_VC3,CSI0 VC3 non-pixel data type" hexmask.long.tbyte 0xC 0.--21. 1. "CSI0_VC3_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x10 "CSI0_NP_data_type_VC4,CSI0 VC4 non-pixel data type" hexmask.long.tbyte 0x10 0.--21. 1. "CSI0_VC4_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x14 "CSI0_NP_data_type_VC5,CSI0 VC5 non-pixel data type" hexmask.long.tbyte 0x14 0.--21. 1. "CSI0_VC5_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x18 "CSI0_NP_data_type_VC6,CSI0 VC6 non-pixel data type" hexmask.long.tbyte 0x18 0.--21. 1. "CSI0_VC6_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x1C "CSI0_NP_data_type_VC7,CSI0 VC7 non-pixel data type" hexmask.long.tbyte 0x1C 0.--21. 1. "CSI0_VC7_NP_data_type_en,Enables transport of non-pixel data on pixel link." line.long 0x20 "CSI0_Pixel_data_ctrl_VC0,CSI0 Pixel Data Control VC0" bitfld.long 0x20 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x20 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x24 "CSI0_Pixel_data_ctrl_VC1,CSI0 Pixel Data Control VC1" bitfld.long 0x24 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x24 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x28 "CSI0_Pixel_data_ctrl_VC2,CSI0 Pixel Data Control VC2" bitfld.long 0x28 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x28 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x2C "CSI0_Pixel_data_ctrl_VC3,CSI0 Pixel Data Control VC3" bitfld.long 0x2C 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x2C 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x30 "CSI0_Pixel_data_ctrl_VC4,CSI0 Pixel Data Control VC4" bitfld.long 0x30 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x30 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x34 "CSI0_Pixel_data_ctrl_VC5,CSI0 Pixel Data Control VC5" bitfld.long 0x34 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x34 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x38 "CSI0_Pixel_data_ctrl_VC6,CSI0 Pixel Data Control VC6" bitfld.long 0x38 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x38 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x3C "CSI0_Pixel_data_ctrl_VC7,CSI0 Pixel Data Control VC7" bitfld.long 0x3C 1.--3. "New_VC,Defines the virtual channel on which the pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x3C 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0: Pixel data are not re-routed.,1: Pixel are routed to VC defined by New_VC." line.long 0x40 "CSI0_Route_Pixel_data_type_VC0,CSI0 Route Pixel Data Type VC0" hexmask.long.word 0x40 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x40 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x44 "CSI0_Route_Pixel_data_type_VC1,CSI0 Route Pixel Data Type VC1" hexmask.long.word 0x44 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x44 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x48 "CSI0_Route_Pixel_data_type_VC2,CSI0 Route Pixel Data Type VC2" hexmask.long.word 0x48 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x48 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x4C "CSI0_Route_Pixel_data_type_VC3,CSI0 Route Pixel Data Type VC3" hexmask.long.word 0x4C 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x4C 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x50 "CSI0_Route_Pixel_data_type_VC4,CSI0 Route Pixel Data Type VC4" hexmask.long.word 0x50 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x50 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x54 "CSI0_Route_Pixel_data_type_VC5,CSI0 Route Pixel Data Type VC5" hexmask.long.word 0x54 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x54 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x58 "CSI0_Route_Pixel_data_type_VC6,CSI0 Route Pixel Data Type VC6" hexmask.long.word 0x58 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x58 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x5C "CSI0_Route_Pixel_data_type_VC7,CSI0 Route Pixel Data Type VC7" hexmask.long.word 0x5C 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x5C 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x60 "CSI0_Non_Pixel_data_ctrl_VC0,CSI0 Non-Pixel Data Control VC0" bitfld.long 0x60 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x60 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x64 "CSI0_Non_Pixel_data_ctrl_VC1,CSI0 Non-Pixel Data Control VC1" bitfld.long 0x64 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x68 "CSI0_Non_Pixel_data_ctrl_VC2,CSI0 Non-Pixel Data Control VC2" bitfld.long 0x68 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x68 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x6C "CSI0_Non_Pixel_data_ctrl_VC3,CSI0 Non-Pixel Data Control VC3" bitfld.long 0x6C 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x6C 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x70 "CSI0_Non_Pixel_data_ctrl_VC4,CSI0 Non-Pixel Data Control VC4" bitfld.long 0x70 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x70 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x74 "CSI0_Non_Pixel_data_ctrl_VC5,CSI0 Non-Pixel Data Control VC5" bitfld.long 0x74 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x74 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x78 "CSI0_Non_Pixel_data_ctrl_VC6,CSI0 Non-Pixel Data Control VC6" bitfld.long 0x78 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x78 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x7C "CSI0_Non_Pixel_data_ctrl_VC7,CSI0 Non-Pixel Data Control VC7" bitfld.long 0x7C 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x7C 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x80 "CSI0_Pixel_data_type_VC0,CSI0 Pixel Data Type VC0" hexmask.long.tbyte 0x80 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x84 "CSI0_Pixel_data_type_VC1,CSI0 Pixel Data Type VC1" hexmask.long.tbyte 0x84 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x88 "CSI0_Pixel_data_type_VC2,CSI0 Pixel Data Type VC2" hexmask.long.tbyte 0x88 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x8C "CSI0_Pixel_data_type_VC3,CSI0 Pixel Data Type VC3" hexmask.long.tbyte 0x8C 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x90 "CSI0_Pixel_data_type_VC4,CSI0 Pixel Data Type VC4" hexmask.long.tbyte 0x90 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x94 "CSI0_Pixel_data_type_VC5,CSI0 Pixel Data Type VC5" hexmask.long.tbyte 0x94 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x98 "CSI0_Pixel_data_type_VC6,CSI0 Pixel Data Type VC6" hexmask.long.tbyte 0x98 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x9C "CSI0_Pixel_data_type_VC7,CSI0 Pixel Data Type VC7" hexmask.long.tbyte 0x9C 0.--23. 1. "type_enable,Pixel data type enable" line.long 0xA0 "CSI0_Pixel_data_type_err_VC0,CSI0 Pixel Data Type Error VC0" hexmask.long.tbyte 0xA0 0.--23. 1. "type_error,Pixel data type error" line.long 0xA4 "CSI0_Pixel_data_type_err_VC1,CSI0 Pixel Data Type Error VC1" hexmask.long.tbyte 0xA4 0.--23. 1. "type_error,Pixel data type error" line.long 0xA8 "CSI0_Pixel_data_type_err_VC2,CSI0 Pixel Data Type Error VC2" hexmask.long.tbyte 0xA8 0.--23. 1. "type_error,Pixel data type error" line.long 0xAC "CSI0_Pixel_data_type_err_VC3,CSI0 Pixel Data Type Error VC3" hexmask.long.tbyte 0xAC 0.--23. 1. "type_error,Pixel data type error" line.long 0xB0 "CSI0_Pixel_data_type_err_VC4,CSI0 Pixel Data Type Error VC4" hexmask.long.tbyte 0xB0 0.--23. 1. "type_error,Pixel data type error" line.long 0xB4 "CSI0_Pixel_data_type_err_VC5,CSI0 Pixel Data Type Error VC5" hexmask.long.tbyte 0xB4 0.--23. 1. "type_error,Pixel data type error" line.long 0xB8 "CSI0_Pixel_data_type_err_VC6,CSI0 Pixel Data Type Error VC6" hexmask.long.tbyte 0xB8 0.--23. 1. "type_error,Pixel data type error" line.long 0xBC "CSI0_Pixel_data_type_err_VC7,CSI0 Pixel Data Type Error VC7" hexmask.long.tbyte 0xBC 0.--23. 1. "type_error,Pixel data type error" line.long 0xC0 "CSI1_VC0_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xC0 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xC0 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xC4 "CSI1_VC1_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xC4 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xC4 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xC8 "CSI1_VC2_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xC8 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xC8 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xCC "CSI1_VC3_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xCC 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xCC 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xD0 "CSI1_VC4_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xD0 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xD0 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xD4 "CSI1_VC5_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xD4 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xD4 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xD8 "CSI1_VC6_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xD8 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xD8 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xDC "CSI1_VC7_interlaced_Line_count_set,Virtual Channel interlaced Line count" hexmask.long.word 0xDC 16.--29. 1. "Even_line_count,Even line count" newline hexmask.long.word 0xDC 0.--13. 1. "Odd_line_count,Odd line count" line.long 0xE0 "CSI1_VC_interlaced_ctrl,CSI1 VC Interlaced Control" bitfld.long 0xE0 14.--15. "CSI1_VC7_interlace_mode,CSI1 VC7 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 12.--13. "CSI1_VC6_interlace_mode,CSI1 VC6 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 10.--11. "CSI1_VC5_interlace_mode,CSI1 VC5 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 8.--9. "CSI1_VC4_interlace_mode,CSI1 VC4 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 6.--7. "CSI1_VC3_interlace_mode,CSI1 VC3 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 4.--5. "CSI1_VC2_interlace_mode,CSI1 VC2 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 2.--3. "CSI1_VC1_interlace_mode,CSI1 VC1 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." newline bitfld.long 0xE0 0.--1. "CSI1_VC0_interlace_mode,CSI1 VC0 interlace mode" "0: Virtual Channel is not interlaced : pixel link..,1: Virtual Channel is interlaced and generation..,2: Virtual Channel is interlaced and generation..,3: Virtual Channel is interlaced. First received.." line.long 0xE4 "CSI1_VC_Interlaced_error,CSI1 VC Interlaced Error" eventfld.long 0xE4 7. "CSI1_VC7,CSI1 VC7 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 6. "CSI1_VC6,CSI1 VC6 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 5. "CSI1_VC5,CSI1 VC5 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 4. "CSI1_VC4,CSI1 VC4 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 3. "CSI1_VC3,CSI1 VC3 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 2. "CSI1_VC2,CSI1 VC2 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 1. "CSI1_VC1,CSI1 VC1 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" newline eventfld.long 0xE4 0. "CSI1_VC0,CSI1 VC0 Line count mismatch" "0: No line count mismatch error,1: Line count mismatch error" line.long 0xE8 "CSI1_YUV420_first_line_even,CSI1 YUV420 First Line Even" bitfld.long 0xE8 7. "VC7,CSI1 VC7 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0xE8 6. "VC6,CSI1 VC6 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0xE8 5. "VC5,CSI1 VC5 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0xE8 4. "VC4,CSI1 VC4 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0xE8 3. "VC3,CSI1 VC3 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0xE8 2. "VC2,CSI1 VC2 first line even" "0: First line is ODD,1: First line is EVEN" newline bitfld.long 0xE8 1. "VC1,CSI1 VC1 first line even" "0,1" newline bitfld.long 0xE8 0. "VC0,CSI1 VC0 first line even" "0: First line is ODD,1: First line is EVEN" group.long 0x150++0x7 line.long 0x0 "CSI1_RAW32_CTR,CSI1 RAW32 Control" hexmask.long.byte 0x0 8.--15. 1. "CSI1_RAW_SWAP_MODE,Defines if a virtual channel is set in RAW SWAP mode when index corresponding to the virtual channel is set to '1'." newline bitfld.long 0x0 7. "CSI1_VC7_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 6. "CSI1_VC6_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 5. "CSI1_VC5_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 4. "CSI1_VC4_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 3. "CSI1_VC3_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 2. "CSI1_VC2_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 1. "CSI1_VC1_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" newline bitfld.long 0x0 0. "CSI1_VC0_RAW32_MODE,Defines if a virtual channel is set in RAW32 mode" "0: VC is not set in RAW32 mode,1: VC is set in RAW32 mode" line.long 0x4 "CSI1_STREAM_FENCING_CTRL,Stream fencing control." hexmask.long.byte 0x4 8.--15. 1. "CSI1_Reset_Fencing_SM,SW reset of Fencing state machine. One per Virtual channel.[8] : Virtual channel 0...[15]: Virtual channel 7" newline hexmask.long.byte 0x4 0.--7. 1. "CSI1_Fencing_Control,[0] Fence VC0...[7] Fence VC7" rgroup.long 0x158++0x3 line.long 0x0 "CSI1_STREAM_FENCING_STATUS,Stream fencing status." hexmask.long.byte 0x0 0.--7. 1. "CSI1_Fencing_Status,Indicates when a virtual channel is fenced when set to '1'. [0] VC0 is fenced...[7] VC7 is fenced" group.long 0x160++0xCF line.long 0x0 "CSI1_NP_data_type_VC0,CSI1 VC0 non-pixel data type" hexmask.long.tbyte 0x0 0.--21. 1. "CSI1_VC0_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x4 "CSI1_NP_data_type_VC1,CSI1 VC1 non-pixel data type" hexmask.long.tbyte 0x4 0.--21. 1. "CSI1_VC1_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x8 "CSI1_NP_data_type_VC2,CSI1 VC2 non-pixel data type" hexmask.long.tbyte 0x8 0.--21. 1. "CSI1_VC2_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0xC "CSI1_NP_data_type_VC3,CSI1 VC3 non-pixel data type" hexmask.long.tbyte 0xC 0.--21. 1. "CSI1_VC3_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x10 "CSI1_NP_data_type_VC4,CSI1 VC4 non-pixel data type" hexmask.long.tbyte 0x10 0.--21. 1. "CSI1_VC4_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x14 "CSI1_NP_data_type_VC5,CSI1 VC5 non-pixel data type" hexmask.long.tbyte 0x14 0.--21. 1. "CSI1_VC5_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x18 "CSI1_NP_data_type_VC6,CSI1 VC6 non-pixel data type" hexmask.long.tbyte 0x18 0.--21. 1. "CSI1_VC6_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x1C "CSI1_NP_data_type_VC7,CSI1 VC7 non-pixel data type" hexmask.long.tbyte 0x1C 0.--21. 1. "CSI1_VC7_NP_data_type_en,Enables transport of non-pixel data on pixel link" line.long 0x20 "CSI1_Pixel_data_ctrl_VC0,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x20 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x20 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x24 "CSI1_Pixel_data_ctrl_VC1,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x24 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x24 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x28 "CSI1_Pixel_data_ctrl_VC2,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x28 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x28 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x2C "CSI1_Pixel_data_ctrl_VC3,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x2C 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x2C 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x30 "CSI1_Pixel_data_ctrl_VC4,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x30 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x30 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x34 "CSI1_Pixel_data_ctrl_VC5,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x34 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x34 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x38 "CSI1_Pixel_data_ctrl_VC6,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x38 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x38 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x3C "CSI1_Pixel_data_ctrl_VC7,Control of the routing of the pixel data on Pixel link virtual channel." bitfld.long 0x3C 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x3C 0. "Reroute_VC,Defines if the pixel data are routed to another VC or not" "0,1" line.long 0x40 "CSI1_Route_Pixel_data_type_VC0,CSI1 Route Pixel Data Type VC0" hexmask.long.word 0x40 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x40 0.--12. 1. "Others,Route RAW pixel data type enable" line.long 0x44 "CSI1_Route_Pixel_data_type_VC1,CSI1 Route Pixel Data Type VC1" hexmask.long.word 0x44 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x44 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x48 "CSI1_Route_Pixel_data_type_VC2,CSI1 Route Pixel Data Type VC2" hexmask.long.word 0x48 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x48 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x4C "CSI1_Route_Pixel_data_type_VC3,CSI1 Route Pixel Data Type VC3" hexmask.long.word 0x4C 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x4C 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x50 "CSI1_Route_Pixel_data_type_VC4,CSI1 Route Pixel Data Type VC4" hexmask.long.word 0x50 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x50 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x54 "CSI1_Route_Pixel_data_type_VC5,CSI1 Route Pixel Data Type VC5" hexmask.long.word 0x54 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x54 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x58 "CSI1_Route_Pixel_data_type_VC6,CSI1 Route Pixel Data Type VC6" hexmask.long.word 0x58 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x58 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x5C "CSI1_Route_Pixel_data_type_VC7,CSI1 Route Pixel Data Type VC7" hexmask.long.word 0x5C 15.--23. 1. "RAW,Route RAW pixel data type enable" newline hexmask.long.word 0x5C 0.--12. 1. "Others,Route other pixel data type enable" line.long 0x60 "CSI1_Non_Pixel_data_ctrl_VC0,CSI1 Non-Pixel Data Control VC0" bitfld.long 0x60 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x60 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x64 "CSI1_Non_Pixel_data_ctrl_VC1,CSI1 Non-Pixel Data Control VC1" bitfld.long 0x64 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x68 "CSI1_Non_Pixel_data_ctrl_VC2,CSI1 Non-Pixel Data Control VC2" bitfld.long 0x68 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x68 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x6C "CSI1_Non_Pixel_data_ctrl_VC3,CSI1 Non-Pixel Data Control VC3" bitfld.long 0x6C 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x6C 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x70 "CSI1_Non_Pixel_data_ctrl_VC4,CSI1 Non-Pixel Data Control VC4" bitfld.long 0x70 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x70 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x74 "CSI1_Non_Pixel_data_ctrl_VC5,CSI1 Non-Pixel Data Control VC5" bitfld.long 0x74 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x74 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x78 "CSI1_Non_Pixel_data_ctrl_VC6,CSI1 Non-Pixel Data Control VC6" bitfld.long 0x78 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x78 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x7C "CSI1_Non_Pixel_data_ctrl_VC7,CSI1 Non-Pixel Data Control VC7" bitfld.long 0x7C 1.--3. "New_VC,Defines the virtual channel on which the non-pixel data are transported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x7C 0. "Reroute_VC,Defines if the non-pixel data are routed to another VC or not" "0: Non-pixel data are not re-routed.,1: Non-pixel data are routed to VC defined by New_VC." line.long 0x80 "CSI1_Pixel_data_type_VC0,CSI1 Pixel Data Type VC0" hexmask.long.tbyte 0x80 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x84 "CSI1_Pixel_data_type_VC1,CSI1 Pixel Data Type VC1" hexmask.long.tbyte 0x84 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x88 "CSI1_Pixel_data_type_VC2,CSI1 Pixel Data Type VC2" hexmask.long.tbyte 0x88 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x8C "CSI1_Pixel_data_type_VC3,CSI1 Pixel Data Type VC3" hexmask.long.tbyte 0x8C 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x90 "CSI1_Pixel_data_type_VC4,CSI1 Pixel Data Type VC4" hexmask.long.tbyte 0x90 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x94 "CSI1_Pixel_data_type_VC5,CSI1 Pixel Data Type VC5" hexmask.long.tbyte 0x94 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x98 "CSI1_Pixel_data_type_VC6,CSI1 Pixel Data Type VC6" hexmask.long.tbyte 0x98 0.--23. 1. "type_enable,Pixel data type enable" line.long 0x9C "CSI1_Pixel_data_type_VC7,CSI1 Pixel Data Type VC7" hexmask.long.tbyte 0x9C 0.--23. 1. "type_enable,Pixel data type enable" line.long 0xA0 "CSI1_Pixel_data_type_err_VC0,CSI1 Pixel Data Type Error VC0" hexmask.long.tbyte 0xA0 0.--23. 1. "type_error,Pixel data type error" line.long 0xA4 "CSI1_Pixel_data_type_err_VC1,CSI1 Pixel Data Type Error VC1" hexmask.long.tbyte 0xA4 0.--23. 1. "type_error,type enable" line.long 0xA8 "CSI1_Pixel_data_type_err_VC2,CSI1 Pixel Data Type Error VC2" hexmask.long.tbyte 0xA8 0.--23. 1. "type_error,Pixel data type error" line.long 0xAC "CSI1_Pixel_data_type_err_VC3,CSI1 Pixel Data Type Error VC3" hexmask.long.tbyte 0xAC 0.--23. 1. "type_error,Pixel data type error" line.long 0xB0 "CSI1_Pixel_data_type_err_VC4,CSI1 Pixel Data Type Error VC4" hexmask.long.tbyte 0xB0 0.--23. 1. "type_error,Pixel data type error" line.long 0xB4 "CSI1_Pixel_data_type_err_VC5,CSI1 Pixel Data Type Error VC5" hexmask.long.tbyte 0xB4 0.--23. 1. "type_error,Pixel data type error" line.long 0xB8 "CSI1_Pixel_data_type_err_VC6,CSI1 Pixel Data Type Error VC6" hexmask.long.tbyte 0xB8 0.--23. 1. "type_error,Pixel data type error" line.long 0xBC "CSI1_Pixel_data_type_err_VC7,CSI1 Pixel Data Type Error VC7" hexmask.long.tbyte 0xBC 0.--23. 1. "type_error,Pixel data type error" line.long 0xC0 "CSI0_Pixel_link_RAW10_format,Pixel link RAW10 format" hexmask.long.byte 0xC0 0.--7. 1. "RAW10P,RAW10P" line.long 0xC4 "CSI1_Pixel_link_RAW10_format,Pixel link RAW10 format" hexmask.long.byte 0xC4 0.--7. 1. "RAW10P,RAW10P" line.long 0xC8 "CSI0_Buffer_Overflow,Buffer Overflow" eventfld.long 0xC8 0. "Buffer_Overflow,Set when the rate adaptation buffer overflows" "0,1" line.long 0xCC "CSI1_Buffer_Overflow,Buffer Overflow" eventfld.long 0xCC 0. "Buffer_Overflow,Set when the rate adaptation buffer overflows" "0,1" group.long 0x300++0x17 line.long 0x0 "CM0P_ADDR_OFFSET1,Cortex-M0+ Address Offset 1" hexmask.long.tbyte 0x0 8.--31. 1. "OFFSET,CM0P_ADDR_OFFSET1" line.long 0x4 "CM0P_ADDR_OFFSET2,Cortex-M0+ Address Offset 2" hexmask.long.tbyte 0x4 8.--31. 1. "OFFSET,CM0P_ADDR_OFFSET2" line.long 0x8 "CM0P_CPUWAIT,Cortex-M0+ CPUWAIT" bitfld.long 0x8 1. "RST,Software reset of CM0P core and LPCAC" "0: CM0P logic is not reset,1: CM0P logic is reset" newline bitfld.long 0x8 0. "CPW,Controls CM0P CPUWAIT input signal" "0: Processor is running,1: Processor is waiting" line.long 0xC "CM0P_CTL,Cortex-M0+ Control" bitfld.long 0xC 19. "OCRAM__in_init_req,OCRAM Initialization request" "0,1" newline bitfld.long 0xC 18. "parity_fault_en,Enable parity error reporting" "0: Disable parity errors and parity error related..,1: Enable parity errors and parity error related.." newline bitfld.long 0xC 17. "parity_miss_en,Miss on error (parity_miss_en)" "0: Disable parity generation parity checking and..,1: Enable parity generation parity checking and.." newline bitfld.long 0xC 16. "lim_lpcac_wtbf,Limit write buffer (lim_lpcac_wtbf)" "0: If write buffer is enabled buffer all writes to..,1: If write buffer is enabled buffer all writes to.." newline bitfld.long 0xC 15. "Boot,Boot source" "0: Boot from OCRAM_L,1: Boot from DDR" newline bitfld.long 0xC 13. "DIS,Disable LPCAC (dis_lpcac)" "0: Enable LPCAC,1: Disable LPCAC" newline bitfld.long 0xC 12. "DWB,Disable LPCAC write buffer (dis_lpcac_wtbf)" "0: Enable write buffer,1: Disable write buffer" newline bitfld.long 0xC 11. "NAL,Disable LPCAC data cache allocation (frc_no_alloc)" "0: Enable LPCAC data cache allocation,1: Disable LPCAC data cache allocation (Bit DWB.." newline bitfld.long 0xC 10. "CLR,Clear LPCAC data cache (clr_lpcac)" "0: Disable clear of LPCAC data cache,1: Enable clear LPCAC data cache" newline hexmask.long.byte 0xC 2.--9. 1. "ILT,Controls the CM0Px IRQLATENCY[7:0] input" line.long 0x10 "CM0P_STAT,Cortex-M0+ Status" bitfld.long 0x10 0. "LKP,CM0P LOCKUP output signal value" "0: Processor is not in lockup state,1: Processor is in lockup state as a result of an.." line.long 0x14 "LPCAC_Error,LPCAC Error" rbitfld.long 0x14 2.--3. "BUSERR,Bus Error size. In case of Cache write-buffer error or Cache data parity error the LPCAC. Be_size is latched in that register." "0,1,2,3" newline eventfld.long 0x14 1. "CACHE_WE,Cache write-buffer error (cache_wb_error). Output of that register is connected to mix output signal 'lpcac_cache_wb_error'" "0,1" newline eventfld.long 0x14 0. "CACHE_PE,Cache data parity error (cache_data_pe). Output of that register is connected to mix output signal 'lpcac_cache_data_pe'" "0,1" rgroup.long 0x318++0x3 line.long 0x0 "LPCAC_Error_Addr,LPCAC Error Address" hexmask.long 0x0 0.--31. 1. "BUSERR_ADDR,In case of Cache write-buffer error or Cache data parity error the bus error address is latched in this register" group.long 0x31C++0x3 line.long 0x0 "ISP_config,ISP Configuration" bitfld.long 0x0 0.--1. "Pixel_link_sel,Select the pixel link connected to the ISP" "0: CSI Pixel Link 0 is connected to the ISP,1: CSI Pixel Link 1 is connected to the ISP,?,?" tree.end tree "CAMERA_CSI_COMBO" base ad:0x4AD40000 rgroup.long 0x0++0x3 line.long 0x0 "VERSION,Core version." hexmask.long 0x0 0.--31. 1. "version,This field indicates the version of the CSI-2 host controller." group.long 0x4++0x7 line.long 0x0 "N_LANES,Number of lanes." bitfld.long 0x0 0.--2. "n_lanes,Number of active data lanes." "0: 1 Data Lane,1: 2 Data Lanes,2: 3 Data Lanes,3: 4 Data Lanes,?,?,?,?" line.long 0x4 "CSI2_RESETN,Logic Reset." bitfld.long 0x4 0. "csi2_resetn,CSI-2 host controller reset." "0: Put the CSI-2 internal logic in the reset state.,1: Release the CSI-2 internal logic from the reset.." rgroup.long 0xC++0x3 line.long 0x0 "INT_ST_MAIN,Main interrupt status." bitfld.long 0x0 17. "status_int_st_line,Status of int_st_line" "0: No error.,1: An interrupt source in INT_ST_LINE is set." newline bitfld.long 0x0 16. "status_int_st_phy,Status of int_st_phy." "0: No error.,1: An interrupt source in INT_ST_PHY is set." newline bitfld.long 0x0 7. "status_int_st_ecc_corrected,Status of int_st_ecc_corrected." "0: No error.,1: An interrupt source in INT_ST_ECC_CORRECTED is.." newline bitfld.long 0x0 6. "status_int_st_data_id,Status of int_st_data_id." "0: No error.,1: An interrupt source in INT_ST_DATA_ID is set." newline bitfld.long 0x0 5. "status_int_st_pld_crc_fatal,Status of int_st_pld_crc_fatal." "0: No error.,1: An interrupt source in INT_ST_PLD_CRC_FATAL is.." newline bitfld.long 0x0 4. "status_int_st_crc_frame_fatal,Status of int_st_crc_frame_fatal." "0: No error.,1: An interrupt source in INT_ST_CRC_FRAME_FATAL is.." newline bitfld.long 0x0 3. "status_int_st_seq_frame_fatal,Status of int_st_seq_frame_fatal." "0: No error.,1: An interrupt source in INT_ST_SEQ_FRAME_FATAL is.." newline bitfld.long 0x0 2. "status_int_st_bndry_frame_fatal,Status of int_st_bndry_frame_fatal." "0: No error.,1: An interrupt source in INT_ST_BNDRY_FRAME_FATAL.." newline bitfld.long 0x0 1. "status_int_st_pkt_fatal,Status of int_st_pkt_fatal." "0: No error.,1: An interrupt source in INT_ST_PKT_FATAL is set." newline bitfld.long 0x0 0. "status_int_st_phy_fatal,Status of int_st_phy_fatal." "0: No error.,1: An interrupt source in INT_ST_PHY_FATAL is set." group.long 0x10++0x7 line.long 0x0 "DATA_IDS_1,Data Type fields for Data ID Monitors 1." hexmask.long.byte 0x0 24.--29. 1. "di3_dt,Data type for programmed data ID 3." newline hexmask.long.byte 0x0 16.--21. 1. "di2_dt,Data type for programmed Data ID 2." newline hexmask.long.byte 0x0 8.--13. 1. "di1_dt,Data type for programmed data ID 1." newline hexmask.long.byte 0x0 0.--5. 1. "di0_dt,Data type for programmed data ID 0." line.long 0x4 "DATA_IDS_2,Data Type fields for Data ID Monitors 2." hexmask.long.byte 0x4 24.--29. 1. "di7_dt,Data type for programmed data ID 7." newline hexmask.long.byte 0x4 16.--21. 1. "di6_dt,Data type for programmed data ID 6." newline hexmask.long.byte 0x4 8.--13. 1. "di5_dt,Data type for programmed data ID 5." newline hexmask.long.byte 0x4 0.--5. 1. "di4_dt,Data type for programmed data ID 4." group.long 0x30++0x7 line.long 0x0 "DATA_IDS_VC_1,Virtual Channel fields for Data ID Monitors 1." bitfld.long 0x0 26.--27. "di3_vcx_0_1,Virtual channel extension for programmed data ID 3." "0,1,2,3" newline bitfld.long 0x0 24.--25. "di3_vc,Virtual channel for programmed data ID 3." "0,1,2,3" newline bitfld.long 0x0 18.--19. "di2_vcx_0_1,Virtual channel extension for programmed data ID 2." "0,1,2,3" newline bitfld.long 0x0 16.--17. "di2_vc,Virtual channel for programmed data ID 2." "0,1,2,3" newline bitfld.long 0x0 10.--11. "di1_vcx_0_1,Virtual channel extension for programmed data ID 1." "0,1,2,3" newline bitfld.long 0x0 8.--9. "di1_vc,Virtual channel for programmed data ID 1." "0,1,2,3" newline bitfld.long 0x0 2.--3. "di0_vcx_0_1,Virtual channel extension for programmed data ID 0." "0,1,2,3" newline bitfld.long 0x0 0.--1. "di0_vc,Virtual channel for programmed data ID 0." "0,1,2,3" line.long 0x4 "DATA_IDS_VC_2,Virtual Channel fields for Data ID Monitors 2." bitfld.long 0x4 26.--27. "di7_vcx_0_1,Virtual channel extension for programmed data ID 7." "0,1,2,3" newline bitfld.long 0x4 24.--25. "di7_vc,Virtual channel for programmed data ID 7." "0,1,2,3" newline bitfld.long 0x4 18.--19. "di6_vcx_0_1,Virtual channel extension for programmed data ID 6." "0,1,2,3" newline bitfld.long 0x4 16.--17. "di6_vc,Virtual channel for programmed data ID 6." "0,1,2,3" newline bitfld.long 0x4 10.--11. "di5_vcx_0_1,Virtual channel extension for programmed data ID 5." "0,1,2,3" newline bitfld.long 0x4 8.--9. "di5_vc,Virtual channel for programmed data ID 5." "0,1,2,3" newline bitfld.long 0x4 2.--3. "di4_vcx_0_1,Virtual channel extension for programmed data ID 4." "0,1,2,3" newline bitfld.long 0x4 0.--1. "di4_vc,Virtual channel for programmed data ID 4." "0,1,2,3" group.long 0x40++0x7 line.long 0x0 "PHY_SHUTDOWNZ,PHY Shutdown." bitfld.long 0x0 0. "phy_shutdownz,Shutdown input." "0: Enter power down mode.,1: Exit from power down mode." line.long 0x4 "DPHY_RSTZ,DPHY reset." bitfld.long 0x4 0. "dphy_rstz,PHY reset." "0: Put PHY in reset.,1: Release PHY from reset." rgroup.long 0x48++0x7 line.long 0x0 "PHY_RX,RX PHY status." bitfld.long 0x0 17. "phy_rxclkactivehs,Indicates that D-PHY clock lane is actively receiving a DDR clock" "0: No clock signal is received in the clock lane.,1: High-speed clock signal is received in clock lane." newline bitfld.long 0x0 16. "phy_rxulpsclknot,Indicates that D-PHY Clock Lane module has entered the Ultra Low Power state." "0: Clock lane is detected in ULPM.,1: Clock lane is not in ULPM." newline bitfld.long 0x0 3. "phy_rxulpsesc_3,Lane module 3 has entered the Ultra Low Power mode" "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." newline bitfld.long 0x0 2. "phy_rxulpsesc_2,Lane module 2 has entered the Ultra Low Power mode" "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." newline bitfld.long 0x0 1. "phy_rxulpsesc_1,Lane module 1 has entered the Ultra Low Power mode" "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." newline bitfld.long 0x0 0. "phy_rxulpsesc_0,Lane module 0 has entered the Ultra Low Power mode." "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." line.long 0x4 "PHY_STOPSTATE,STOPSTATE PHY status." bitfld.long 0x4 16. "phy_stopstateclk,D-PHY Clock lane in Stop state" "0: Clock lane is not in Stop state.,1: Clock lane is in Stop state." newline bitfld.long 0x4 3. "phy_stopstatedata_3,Data lane 3 in Stop state" "0: Data lane is not in Stop state.,1: Data lane is in Stop state." newline bitfld.long 0x4 2. "phy_stopstatedata_2,Data lane 2 in Stop state" "0: Data lane is not in Stop state.,1: Data lane is in Stop state." newline bitfld.long 0x4 1. "phy_stopstatedata_1,Data lane 1 in Stop state" "0: Data lane is not in Stop state.,1: Data lane is in Stop state." newline bitfld.long 0x4 0. "phy_stopstatedata_0,Data lane 0 in Stop state." "0: Data lane is not in Stop state.,1: Data lane is in Stop state." group.long 0x50++0x7 line.long 0x0 "PHY_TEST_CTRL0,PHY Test and Control interface 0." bitfld.long 0x0 1. "phy_testclk,Clock to capture testdin bus contents into the macro with testen signal controlling the operation selection." "0,1" newline bitfld.long 0x0 0. "phy_testclr,When active performs vendor specific interface initialization." "0,1" line.long 0x4 "PHY_TEST_CTRL1,PHY Test and Control interface 1." bitfld.long 0x4 16. "phy_testen,Data write on the rising edge of TESTCLK or address write on the falling edge of TESTCLK" "0: Configures a data write operation on the rising..,1: Configures an address write operation on the.." newline hexmask.long.byte 0x4 8.--15. 1. "phy_testdout,Vendor-specific 8-bit data output for reading data and other probing functionalities." newline hexmask.long.byte 0x4 0.--7. 1. "phy_testdin,Test interface 8-bit data input for programming internal registers and accessing test functionalities." group.long 0xC8++0x3 line.long 0x0 "VC_EXTENSION,Virtual Channel Extension." bitfld.long 0x0 0. "vcx,Virtual channel extension" "0: Virtual channel extension is enabled.,1: Legacy mode. Virtual channel extension is.." rgroup.long 0xCC++0x3 line.long 0x0 "PHY_CAL,PHY Calibration." bitfld.long 0x0 0. "rxskewcalhs,A low-to-high transition on rxskewcalhs signal means that the PHY has initiated the de-skew calibration." "0: No calibration.,1: PHY has initiated the de-skew calibration." rgroup.long 0xE0++0x3 line.long 0x0 "INT_ST_PHY_FATAL,Fatal interruption caused by PHY." bitfld.long 0x0 3. "phy_errsotsynchs_3,Start of transmission error on data lane 3 (no synchronization achieved)" "0: No error,1: Start of transmission error on data lane 3" newline bitfld.long 0x0 2. "phy_errsotsynchs_2,Start of transmission error on data lane 2 (no synchronization achieved)" "0: No error,1: Start of transmission error on data lane 2" newline bitfld.long 0x0 1. "phy_errsotsynchs_1,Start of transmission error on data lane 1 (no synchronization achieved)" "0: No error,1: Start of transmission error on data lane 1" newline bitfld.long 0x0 0. "phy_errsotsynchs_0,Start of transmission error on data lane 0 (no synchronization achieved)." "0: No error,1: Start of transmission error on data lane 0" group.long 0xE4++0x7 line.long 0x0 "INT_MSK_PHY_FATAL,Mask for fatal interruption caused by PHY." bitfld.long 0x0 3. "mask_phy_errsotsynchs_3,Mask for phy_errsotsynchs_3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "mask_phy_errsotsynchs_2,Mask for phy_errsotsynchs_2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "mask_phy_errsotsynchs_1,Mask for phy_errsotsynchs_1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_phy_errsotsynchs_0,Mask for phy_errsotsynchs_0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PHY_FATAL,Force for fatal interruption caused by PHY." bitfld.long 0x4 3. "force_phy_errsotsynchs_3,Force phy_errsotsynchs_3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "force_phy_errsotsynchs_2,Force phy_errsotsynchs_2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "force_phy_errsotsynchs_1,Force phy_errsotsynchs_1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_phy_errsotsynchs_0,Force phy_errsotsynchs_0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0xF0++0x3 line.long 0x0 "INT_ST_PKT_FATAL,Fatal interruption caused during Packet Construction." bitfld.long 0x0 1. "shorter_payload,D-PHY mode: Reported greater WC than received unrecoverable." "0: No error.,1: Reported greater Word Count than received.." newline bitfld.long 0x0 0. "err_ecc_double,D-PHY mode: Header ECC contains at least 2 errors unrecoverable." "0: No error.,1: Header ECC contains at least 2 errors.." group.long 0xF4++0x7 line.long 0x0 "INT_MSK_PKT_FATAL,Mask for fatal interruption caused during Packet Construction." bitfld.long 0x0 1. "mask_shorter_payload,Mask for shorter_payload." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_err_ecc_double,Mask for err_ecc_double." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PKT_FATAL,Force for fatal interruption caused during Packet Construction." bitfld.long 0x4 1. "force_shorter_payload,Force shorter_payload." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_err_ecc_double,Force err_ecc_double." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x110++0x3 line.long 0x0 "INT_ST_PHY,Interruption caused by PHY." bitfld.long 0x0 19. "phy_erresc_3,Escape Entry Error on data lane 3" "0: No error,1: Escape entry error on data lane 3" newline bitfld.long 0x0 18. "phy_erresc_2,Escape Entry Error on data lane 2" "0: No error,1: Escape entry error on data lane 2" newline bitfld.long 0x0 17. "phy_erresc_1,Escape Entry Error on data lane 1" "0: No error,1: Escape entry error on data lane 1" newline bitfld.long 0x0 16. "phy_erresc_0,Escape Entry Error on data lane 0." "0: No error,1: Escape entry error on data lane 0" newline bitfld.long 0x0 3. "phy_errsoths_3,Start of transmission error on data lane 3 (synchronization can still be achieved)" "0: No error,1: Start of transmission error on data lane 3" newline bitfld.long 0x0 2. "phy_errsoths_2,Start of transmission error on data lane 2 (synchronization can still be achieved)" "0: No error,1: Start of transmission error on data lane 2" newline bitfld.long 0x0 1. "phy_errsoths_1,Start of transmission error on data lane 1 (synchronization can still be achieved)" "0: No error,1: Start of transmission error on data lane 1" newline bitfld.long 0x0 0. "phy_errsoths_0,Start of transmission error on data lane 0 (synchronization can still be achieved)." "0: No error,1: Start of transmission error on data lane 0" group.long 0x114++0x7 line.long 0x0 "INT_MSK_PHY,Mask for interruption caused by PHY." bitfld.long 0x0 19. "mask_phy_erresc_3,Mask for phy_erresc_3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 18. "mask_phy_erresc_2,Mask for phy_erresc_2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 17. "mask_phy_erresc_1,Mask for phy_erresc_1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 16. "mask_phy_erresc_0,Mask for phy_erresc_0." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "mask_phy_errsoths_3,Mask for phy_errsoths_3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "mask_phy_errsoths_2,Mask for phy_errsoths_2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "mask_phy_errsoths_1,Mask for phy_errsoths_1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_phy_errsoths_0,Mask for phy_errsoths_0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PHY,Force for interruption caused by PHY." bitfld.long 0x4 19. "force_phy_erresc_3,Force phy_erresc_3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 18. "force_phy_erresc_2,Force phy_erresc_2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 17. "force_phy_erresc_1,Force phy_erresc_1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 16. "force_phy_erresc_0,Force phy_erresc_0" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "force_phy_errsoths_3,Force phy_errsoths_3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "force_phy_errsoths_2,Force phy_errsoths_2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "force_phy_errsoths_1,Force phy_errsoths_1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_phy_errsoths_0,Force phy_errsoths_0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x130++0x3 line.long 0x0 "INT_ST_LINE,Interruption occurred during Line construction." bitfld.long 0x0 23. "err_l_seq_di7,Error in the sequence of lines for vc7 and dt7" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 22. "err_l_seq_di6,Error in the sequence of lines for vc6 and dt6" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 21. "err_l_seq_di5,Error in the sequence of lines for vc5 and dt5" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 20. "err_l_seq_di4,Error in the sequence of lines for vc4 and dt4" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 19. "err_l_seq_di3,Error in the sequence of lines for vc3 and dt3" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 18. "err_l_seq_di2,Error in the sequence of lines for vc2 and dt2" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 17. "err_l_seq_di1,Error in the sequence of lines for vc1 and dt1" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 16. "err_l_seq_di0,Error in the sequence of lines for vc0 and dt0" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 7. "err_l_bndry_match_di7,Error matching line start with line end for vc7 and dt7" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 6. "err_l_bndry_match_di6,Error matching line start with line end for vc6 and dt6" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 5. "err_l_bndry_match_di5,Error matching line start with line end for vc5 and dt5" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 4. "err_l_bndry_match_di4,Error matching line start with line end for vc4 and dt4" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 3. "err_l_bndry_match_di3,Error matching line start with line end for vc3 and dt3" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 2. "err_l_bndry_match_di2,Error matching line start with line end for vc2 and dt2" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 1. "err_l_bndry_match_di1,Error matching line start with line end for vc1 and dt1" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 0. "err_l_bndry_match_di0,Error matching line start with line end for vc0 and dt0" "0: No error.,1: Line start and line end mismatch error occurred." group.long 0x134++0x7 line.long 0x0 "INT_MSK_LINE,Mask for interruption occurred during Line construction." bitfld.long 0x0 23. "mask_err_l_seq_di7,Mask for err_l_seq_di7" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 22. "mask_err_l_seq_di6,Mask for err_l_seq_di6" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 21. "mask_err_l_seq_di5,Mask for err_l_seq_di5" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 20. "mask_err_l_seq_di4,Mask for err_l_seq_di4" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 19. "mask_err_l_seq_di3,Mask for err_l_seq_di3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 18. "mask_err_l_seq_di2,Mask for err_l_seq_di2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 17. "mask_err_l_seq_di1,Mask for err_l_seq_di1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 16. "mask_err_l_seq_di0,Mask for err_l_seq_di0" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "mask_err_l_bndry_match_di7,Mask for err_l_bndry_match_di7" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "mask_err_l_bndry_match_di6,Mask for err_l_bndry_match_di6" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "mask_err_l_bndry_match_di5,Mask for err_l_bndry_match_di5" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "mask_err_l_bndry_match_di4,Mask for err_l_bndry_match_di4" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "mask_err_l_bndry_match_di3,Mask for err_l_bndry_match_di3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "mask_err_l_bndry_match_di2,Mask for err_l_bndry_match_di2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "mask_err_l_bndry_match_di1,Mask for err_l_bndry_match_di1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_err_l_bndry_match_di0,Mask for err_l_bndry_match_di0" "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_LINE,Force for interruption occurred during Line construction." bitfld.long 0x4 23. "force_err_l_seq_di7,Force err_l_seq_di7" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 22. "force_err_l_seq_di6,Force err_l_seq_di6" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 21. "force_err_l_seq_di5,Force err_l_seq_di5" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 20. "force_err_l_seq_di4,Force err_l_seq_di4" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 19. "force_err_l_seq_di3,Force err_l_seq_di3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 18. "force_err_l_seq_di2,Force err_l_seq_di2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 17. "force_err_l_seq_di1,Force err_l_seq_di1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 16. "force_err_l_seq_di0,Force err_l_seq_di0" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "force_err_l_bndry_match_di7,Force err_l_bndry_match_di7" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "force_err_l_bndry_match_di6,Force err_l_bndry_match_di6" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "force_err_l_bndry_match_di5,Force err_l_bndry_match_di5" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "force_err_l_bndry_match_di4,Force err_l_bndry_match_di4" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "force_err_l_bndry_match_di3,Force err_l_bndry_match_di3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "force_err_l_bndry_match_di2,Force err_l_bndry_match_di2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "force_err_l_bndry_match_di1,Force err_l_bndry_match_di1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_err_l_bndry_match_di0,Force err_l_bndry_match_di0" "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x280++0x3 line.long 0x0 "INT_ST_BNDRY_FRAME_FATAL,Fatal Interruption caused by Frame Boundaries." bitfld.long 0x0 15. "err_f_bndry_match_vc15,Error matching Frame Start with Frame End for virtual channel 15." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 14. "err_f_bndry_match_vc14,Error matching Frame Start with Frame End for virtual channel 14." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 13. "err_f_bndry_match_vc13,Error matching Frame Start with Frame End for virtual channel 13." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 12. "err_f_bndry_match_vc12,Error matching Frame Start with Frame End for virtual channel 12." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 11. "err_f_bndry_match_vc11,Error matching Frame Start with Frame End for virtual channel 11." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 10. "err_f_bndry_match_vc10,Error matching Frame Start with Frame End for virtual channel 10." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 9. "err_f_bndry_match_vc9,Error matching Frame Start with Frame End for virtual channel 9." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 8. "err_f_bndry_match_vc8,Error matching Frame Start with Frame End for virtual channel 8." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 7. "err_f_bndry_match_vc7,Error matching Frame Start with Frame End for virtual channel 7." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 6. "err_f_bndry_match_vc6,Error matching Frame Start with Frame End for virtual channel 6." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 5. "err_f_bndry_match_vc5,Error matching Frame Start with Frame End for virtual channel 5." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 4. "err_f_bndry_match_vc4,Error matching Frame Start with Frame End for virtual channel 4." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 3. "err_f_bndry_match_vc3,Error matching Frame Start with Frame End for virtual channel 3." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 2. "err_f_bndry_match_vc2,Error matching Frame Start with Frame End for virtual channel 2." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 1. "err_f_bndry_match_vc1,Error matching Frame Start with Frame End for virtual channel 1." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 0. "err_f_bndry_match_vc0,Error matching Frame Start with Frame End for virtual channel 0." "0: No error.,1: Matching frame start with frame end error is.." group.long 0x284++0x7 line.long 0x0 "INT_MSK_BNDRY_FRAME_FATAL,Mask for fatal interruption caused by Frame Boundaries." bitfld.long 0x0 15. "err_f_bndry_match_vc15,Mask for err_f_bndry_match_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_f_bndry_match_vc14,Mask for err_f_bndry_match_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_f_bndry_match_vc13,Mask for err_f_bndry_match_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_f_bndry_match_vc12,Mask for err_f_bndry_match_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_f_bndry_match_vc11,Mask for err_f_bndry_match_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_f_bndry_match_vc10,Mask for err_f_bndry_match_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_f_bndry_match_vc9,Mask for err_f_bndry_match_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_f_bndry_match_vc8,Mask for err_f_bndry_match_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_f_bndry_match_vc7,Mask for err_f_bndry_match_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_f_bndry_match_vc6,Mask for err_f_bndry_match_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_f_bndry_match_vc5,Mask for err_f_bndry_match_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_f_bndry_match_vc4,Mask for err_f_bndry_match_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_f_bndry_match_vc3,Mask for err_f_bndry_match_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_f_bndry_match_vc2,Mask for err_f_bndry_match_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_f_bndry_match_vc1,Mask for err_f_bndry_match_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_f_bndry_match_vc0,Mask for err_f_bndry_match_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_BNDRY_FRAME_FATAL,Force for fatal interruption caused by Frame Boundaries." bitfld.long 0x4 15. "err_f_bndry_match_vc15,Force err_f_bndry_match_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_f_bndry_match_vc14,Force err_f_bndry_match_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_f_bndry_match_vc13,Force err_f_bndry_match_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_f_bndry_match_vc12,Force err_f_bndry_match_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_f_bndry_match_vc11,Force err_f_bndry_match_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_f_bndry_match_vc10,Force err_f_bndry_match_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_f_bndry_match_vc9,Force err_f_bndry_match_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_f_bndry_match_vc8,Force err_f_bndry_match_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_f_bndry_match_vc7,Force err_f_bndry_match_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_f_bndry_match_vc6,Force err_f_bndry_match_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_f_bndry_match_vc5,Force err_f_bndry_match_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_f_bndry_match_vc4,Force err_f_bndry_match_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_f_bndry_match_vc3,Force err_f_bndry_match_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_f_bndry_match_vc2,Force err_f_bndry_match_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_f_bndry_match_vc1,Force err_f_bndry_match_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_f_bndry_match_vc0,Force err_f_bndry_match_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x290++0x3 line.long 0x0 "INT_ST_SEQ_FRAME_FATAL,Fatal Interruption caused by Frame Sequence." bitfld.long 0x0 15. "err_f_seq_vc15,Incorrect Frame sequence detected in virtual channel 15." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 14. "err_f_seq_vc14,Incorrect Frame sequence detected in virtual channel 14." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 13. "err_f_seq_vc13,Incorrect Frame sequence detected in virtual channel 13." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 12. "err_f_seq_vc12,Incorrect Frame sequence detected in virtual channel 12." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 11. "err_f_seq_vc11,Incorrect Frame sequence detected in virtual channel 11." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 10. "err_f_seq_vc10,Incorrect Frame sequence detected in virtual channel 10." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 9. "err_f_seq_vc9,Incorrect Frame sequence detected in virtual channel 9." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 8. "err_f_seq_vc8,Incorrect Frame sequence detected in virtual channel 8." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 7. "err_f_seq_vc7,Incorrect Frame sequence detected in virtual channel 7." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 6. "err_f_seq_vc6,Incorrect Frame sequence detected in virtual channel 6." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 5. "err_f_seq_vc5,Incorrect Frame sequence detected in virtual channel 5." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 4. "err_f_seq_vc4,Incorrect Frame sequence detected in virtual channel 4." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 3. "err_f_seq_vc3,Incorrect Frame sequence detected in virtual channel 3." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 2. "err_f_seq_vc2,Incorrect Frame sequence detected in virtual channel 2." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 1. "err_f_seq_vc1,Incorrect Frame sequence detected in virtual channel 1." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 0. "err_f_seq_vc0,Incorrect Frame sequence detected in virtual channel 0." "0: No error.,1: Incorrect frame sequence error is detected." group.long 0x294++0x7 line.long 0x0 "INT_MSK_SEQ_FRAME_FATAL,Mask for fatal interruption caused by Frame Sequence." bitfld.long 0x0 15. "err_f_seq_vc15,Mask for err_f_seq_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_f_seq_vc14,Mask for err_f_seq_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_f_seq_vc13,Mask for err_f_seq_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_f_seq_vc12,Mask for err_f_seq_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_f_seq_vc11,Mask for err_f_seq_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_f_seq_vc10,Mask for err_f_seq_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_f_seq_vc9,Mask for err_f_seq_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_f_seq_vc8,Mask for err_f_seq_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_f_seq_vc7,Mask for err_f_seq_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_f_seq_vc6,Mask for err_f_seq_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_f_seq_vc5,Mask for err_f_seq_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_f_seq_vc4,Mask for err_f_seq_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_f_seq_vc3,Mask for err_f_seq_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_f_seq_vc2,Mask for err_f_seq_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_f_seq_vc1,Mask for err_f_seq_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_f_seq_vc0,Mask for err_f_seq_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_SEQ_FRAME_FATAL,Force for fatal interruption caused by Frame Sequence." bitfld.long 0x4 15. "err_f_seq_vc15,Force err_f_seq_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_f_seq_vc14,Force err_f_seq_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_f_seq_vc13,Force err_f_seq_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_f_seq_vc12,Force err_f_seq_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_f_seq_vc11,Force err_f_seq_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_f_seq_vc10,Force err_f_seq_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_f_seq_vc9,Force err_f_seq_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_f_seq_vc8,Force err_f_seq_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_f_seq_vc7,Force err_f_seq_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_f_seq_vc6,Force err_f_seq_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_f_seq_vc5,Force err_f_seq_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_f_seq_vc4,Force err_f_seq_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_f_seq_vc3,Force err_f_seq_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_f_seq_vc2,Force err_f_seq_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_f_seq_vc1,Force err_f_seq_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_f_seq_vc0,Force err_f_seq_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2A0++0x3 line.long 0x0 "INT_ST_CRC_FRAME_FATAL,Fatal Interruption caused by Frame CRC." bitfld.long 0x0 15. "err_frame_data_vc15,Last received Frame in virtual channel 15 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 14. "err_frame_data_vc14,Last received Frame in virtual channel 14 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 13. "err_frame_data_vc13,Last received Frame in virtual channel 13 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 12. "err_frame_data_vc12,Last received Frame in virtual channel 12 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 11. "err_frame_data_vc11,Last received Frame in virtual channel 11 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 10. "err_frame_data_vc10,Last received Frame in virtual channel 10 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 9. "err_frame_data_vc9,Last received Frame in virtual channel 9 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 8. "err_frame_data_vc8,Last received Frame in virtual channel 8 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 7. "err_frame_data_vc7,Last received Frame in virtual channel 7 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 6. "err_frame_data_vc6,Last received Frame in virtual channel 6 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 5. "err_frame_data_vc5,Last received Frame in virtual channel 5 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 4. "err_frame_data_vc4,Last received Frame in virtual channel 4 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 3. "err_frame_data_vc3,Last received Frame in virtual channel 3 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 2. "err_frame_data_vc2,Last received Frame in virtual channel 2 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 1. "err_frame_data_vc1,Last received Frame in virtual channel 1 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 0. "err_frame_data_vc0,Last received Frame in virtual channel 0 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." group.long 0x2A4++0x7 line.long 0x0 "INT_MSK_CRC_FRAME_FATAL,Mask for fatal interruption caused by Frame CRC." bitfld.long 0x0 15. "err_frame_data_vc15,Mask for err_frame_data_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_frame_data_vc14,Mask for err_frame_data_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_frame_data_vc13,Mask for err_frame_data_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_frame_data_vc12,Mask for err_frame_data_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_frame_data_vc11,Mask for err_frame_data_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_frame_data_vc10,Mask for err_frame_data_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_frame_data_vc9,Mask for err_frame_data_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_frame_data_vc8,Mask for err_frame_data_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_frame_data_vc7,Mask for err_frame_data_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_frame_data_vc6,Mask for err_frame_data_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_frame_data_vc5,Mask for err_frame_data_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_frame_data_vc4,Mask for err_frame_data_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_frame_data_vc3,Mask for err_frame_data_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_frame_data_vc2,Mask for err_frame_data_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_frame_data_vc1,Mask for err_frame_data_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_frame_data_vc0,Mask for err_frame_data_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_CRC_FRAME_FATAL,Force for fatal interruption caused by Frame CRC." bitfld.long 0x4 15. "err_frame_data_vc15,Force err_frame_data_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_frame_data_vc14,Force err_frame_data_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_frame_data_vc13,Force err_frame_data_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_frame_data_vc12,Force err_frame_data_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_frame_data_vc11,Force err_frame_data_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_frame_data_vc10,Force err_frame_data_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_frame_data_vc9,Force err_frame_data_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_frame_data_vc8,Force err_frame_data_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_frame_data_vc7,Force err_frame_data_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_frame_data_vc6,Force err_frame_data_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_frame_data_vc5,Force err_frame_data_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_frame_data_vc4,Force err_frame_data_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_frame_data_vc3,Force err_frame_data_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_frame_data_vc2,Force err_frame_data_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_frame_data_vc1,Force err_frame_data_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_frame_data_vc0,Force err_frame_data_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2B0++0x3 line.long 0x0 "INT_ST_PLD_CRC_FATAL,Fatal Interruption caused by Payload CRC." bitfld.long 0x0 15. "err_crc_vc15,Payload Checksum error detected on virtual channel 15." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 14. "err_crc_vc14,Payload Checksum error detected on virtual channel 14." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 13. "err_crc_vc13,Payload Checksum error detected on virtual channel 13." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 12. "err_crc_vc12,Payload Checksum error detected on virtual channel 12." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 11. "err_crc_vc11,Payload Checksum error detected on virtual channel 11." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 10. "err_crc_vc10,Payload Checksum error detected on virtual channel 10." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 9. "err_crc_vc9,Payload Checksum error detected on virtual channel 9." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 8. "err_crc_vc8,Payload Checksum error detected on virtual channel 8." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 7. "err_crc_vc7,Payload Checksum error detected on virtual channel 7." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 6. "err_crc_vc6,Payload Checksum error detected on virtual channel 6." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 5. "err_crc_vc5,Payload Checksum error detected on virtual channel 5." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 4. "err_crc_vc4,Payload Checksum error detected on virtual channel 4." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 3. "err_crc_vc3,Payload Checksum error detected on virtual channel 3." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 2. "err_crc_vc2,Payload Checksum error detected on virtual channel 2." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 1. "err_crc_vc1,Payload Checksum error detected on virtual channel 1." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 0. "err_crc_vc0,Payload Checksum error detected on virtual channel 0." "0: No error.,1: Payload checksum error is detected." group.long 0x2B4++0x7 line.long 0x0 "INT_MSK_PLD_CRC_FATAL,Mask for fatal interruption caused by Payload CRC." bitfld.long 0x0 15. "err_crc_vc15,Mask for err_crc_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_crc_vc14,Mask for err_crc_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_crc_vc13,Mask for err_crc_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_crc_vc12,Mask for err_crc_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_crc_vc11,Mask for err_crc_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_crc_vc10,Mask for err_crc_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_crc_vc9,Mask for err_crc_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_crc_vc8,Mask for err_crc_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_crc_vc7,Mask for err_crc_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_crc_vc6,Mask for err_crc_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_crc_vc5,Mask for err_crc_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_crc_vc4,Mask for err_crc_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_crc_vc3,Mask for err_crc_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_crc_vc2,Mask for err_crc_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_crc_vc1,Mask for err_crc_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_crc_vc0,Mask for err_crc_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PLD_CRC_FATAL,Force for fatal interruption caused by Payload CRC." bitfld.long 0x4 15. "err_crc_vc15,Force err_crc_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_crc_vc14,Force err_crc_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_crc_vc13,Force err_crc_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_crc_vc12,Force err_crc_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_crc_vc11,Force err_crc_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_crc_vc10,Force err_crc_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_crc_vc9,Force err_crc_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_crc_vc8,Force err_crc_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_crc_vc7,Force err_crc_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_crc_vc6,Force err_crc_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_crc_vc5,Force err_crc_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_crc_vc4,Force err_crc_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_crc_vc3,Force err_crc_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_crc_vc2,Force err_crc_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_crc_vc1,Force err_crc_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_crc_vc0,Force err_crc_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2C0++0x3 line.long 0x0 "INT_ST_DATA_ID,Interruption caused by Data Type." bitfld.long 0x0 15. "err_id_vc15,Unrecognized or unimplemented data type detected in virtual channel 15." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 14. "err_id_vc14,Unrecognized or unimplemented data type detected in virtual channel 14." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 13. "err_id_vc13,Unrecognized or unimplemented data type detected in virtual channel 13." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 12. "err_id_vc12,Unrecognized or unimplemented data type detected in virtual channel 12." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 11. "err_id_vc11,Unrecognized or unimplemented data type detected in virtual channel 11." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 10. "err_id_vc10,Unrecognized or unimplemented data type detected in virtual channel 10." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 9. "err_id_vc9,Unrecognized or unimplemented data type detected in virtual channel 9." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 8. "err_id_vc8,Unrecognized or unimplemented data type detected in virtual channel 8." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 7. "err_id_vc7,Unrecognized or unimplemented data type detected in virtual channel 7." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 6. "err_id_vc6,Unrecognized or unimplemented data type detected in virtual channel 6." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 5. "err_id_vc5,Unrecognized or unimplemented data type detected in virtual channel 5." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 4. "err_id_vc4,Unrecognized or unimplemented data type detected in virtual channel 4." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 3. "err_id_vc3,Unrecognized or unimplemented data type detected in virtual channel 3." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 2. "err_id_vc2,Unrecognized or unimplemented data type detected in virtual channel 2." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 1. "err_id_vc1,Unrecognized or unimplemented data type detected in virtual channel 1." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 0. "err_id_vc0,Unrecognized or unimplemented data type detected in virtual channel 0." "0: No error.,1: Unrecognized or unimplemented data type error is.." group.long 0x2C4++0x7 line.long 0x0 "INT_MSK_DATA_ID,Mask for interruption caused by Data Type." bitfld.long 0x0 15. "err_id_vc15,Mask for err_id_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_id_vc14,Mask for err_id_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_id_vc13,Mask for err_id_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_id_vc12,Mask for err_id_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_id_vc11,Mask for err_id_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_id_vc10,Mask for err_id_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_id_vc9,Mask for err_id_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_id_vc8,Mask for err_id_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_id_vc7,Mask for err_id_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_id_vc6,Mask for err_id_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_id_vc5,Mask for err_id_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_id_vc4,Mask for err_id_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_id_vc3,Mask for err_id_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_id_vc2,Mask for err_id_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_id_vc1,Mask for err_id_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_id_vc0,Mask for err_id_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_DATA_ID,Force for interruption caused by Data Type." bitfld.long 0x4 15. "err_id_vc15,Force err_id_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_id_vc14,Force err_id_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_id_vc13,Force err_id_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_id_vc12,Force err_id_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_id_vc11,Force err_id_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_id_vc10,Force err_id_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_id_vc9,Force err_id_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_id_vc8,Force err_id_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_id_vc7,Force err_id_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_id_vc6,Force err_id_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_id_vc5,Force err_id_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_id_vc4,Force err_id_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_id_vc3,Force err_id_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_id_vc2,Force err_id_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_id_vc1,Force err_id_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_id_vc0,Force err_id_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2D0++0x3 line.long 0x0 "INT_ST_ECC_CORRECTED,Interruption caused by Header single bit errors." bitfld.long 0x0 15. "err_ecc_corrected_vc15,Header error detected and corrected on virtual channel 15." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 14. "err_ecc_corrected_vc14,Header error detected and corrected on virtual channel 14." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 13. "err_ecc_corrected_vc13,Header error detected and corrected on virtual channel 13." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 12. "err_ecc_corrected_vc12,Header error detected and corrected on virtual channel 12." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 11. "err_ecc_corrected_vc11,Header error detected and corrected on virtual channel 11." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 10. "err_ecc_corrected_vc10,Header error detected and corrected on virtual channel 10." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 9. "err_ecc_corrected_vc9,Header error detected and corrected on virtual channel 9." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 8. "err_ecc_corrected_vc8,Header error detected and corrected on virtual channel 8." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 7. "err_ecc_corrected_vc7,Header error detected and corrected on virtual channel 7." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 6. "err_ecc_corrected_vc6,Header error detected and corrected on virtual channel 6." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 5. "err_ecc_corrected_vc5,Header error detected and corrected on virtual channel 5." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 4. "err_ecc_corrected_vc4,Header error detected and corrected on virtual channel 4." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 3. "err_ecc_corrected_vc3,Header error detected and corrected on virtual channel 3." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 2. "err_ecc_corrected_vc2,Header error detected and corrected on virtual channel 2." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 1. "err_ecc_corrected_vc1,Header error detected and corrected on virtual channel 1." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 0. "err_ecc_corrected_vc0,Header error detected and corrected on virtual channel 0." "0: No error.,1: Header error detected and corrected." group.long 0x2D4++0x7 line.long 0x0 "INT_MSK_ECC_CORRECTED,Mask for interruption caused by Header single bit errors." bitfld.long 0x0 15. "err_ecc_corrected_vc15,Mask for err_ecc_corrected_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_ecc_corrected_vc14,Mask for err_ecc_corrected_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_ecc_corrected_vc13,Mask for err_ecc_corrected_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_ecc_corrected_vc12,Mask for err_ecc_corrected_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_ecc_corrected_vc11,Mask for err_ecc_corrected_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_ecc_corrected_vc10,Mask for err_ecc_corrected_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_ecc_corrected_vc9,Mask for err_ecc_corrected_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_ecc_corrected_vc8,Mask for err_ecc_corrected_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_ecc_corrected_vc7,Mask for err_ecc_corrected_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_ecc_corrected_vc6,Mask for err_ecc_corrected_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_ecc_corrected_vc5,Mask for err_ecc_corrected_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_ecc_corrected_vc4,Mask for err_ecc_corrected_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_ecc_corrected_vc3,Mask for err_ecc_corrected_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_ecc_corrected_vc2,Mask for err_ecc_corrected_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_ecc_corrected_vc1,Mask for err_ecc_corrected_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_ecc_corrected_vc0,Mask for err_ecc_corrected_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_ECC_CORRECTED,Force for interruption caused by Header single bit errors." bitfld.long 0x4 15. "err_ecc_corrected_vc15,Force err_ecc_corrected_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_ecc_corrected_vc14,Force err_ecc_corrected_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_ecc_corrected_vc13,Force err_ecc_corrected_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_ecc_corrected_vc12,Force err_ecc_corrected_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_ecc_corrected_vc11,Force err_ecc_corrected_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_ecc_corrected_vc10,Force err_ecc_corrected_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_ecc_corrected_vc9,Force err_ecc_corrected_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_ecc_corrected_vc8,Force err_ecc_corrected_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_ecc_corrected_vc7,Force err_ecc_corrected_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_ecc_corrected_vc6,Force err_ecc_corrected_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_ecc_corrected_vc5,Force err_ecc_corrected_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_ecc_corrected_vc4,Force err_ecc_corrected_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_ecc_corrected_vc3,Force err_ecc_corrected_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_ecc_corrected_vc2,Force err_ecc_corrected_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_ecc_corrected_vc1,Force err_ecc_corrected_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_ecc_corrected_vc0,Force err_ecc_corrected_vc0." "0: Do not force the error event.,1: Force the error event to trigger." group.long 0x300++0x13 line.long 0x0 "SCRAMBLING,Data De-Scrambling." bitfld.long 0x0 0. "scramble_enable,Enables data de-scrambling on the controller side." "0: Disable data de-scrambling,1: Enable data de-scrambling" line.long 0x4 "SCRAMBLING_SEED1,De-scrambler seed for lane1." hexmask.long.word 0x4 0.--15. 1. "scramble_seed_lane1,Seed used by De-scrambler block for lane 1" line.long 0x8 "SCRAMBLING_SEED2,De-scrambler seed for lane2." hexmask.long.word 0x8 0.--15. 1. "scramble_seed_lane2,Seed used by De-scrambler block for lane 2" line.long 0xC "SCRAMBLING_SEED3,De-scrambler seed for lane3." hexmask.long.word 0xC 0.--15. 1. "scramble_seed_lane3,Seed used by De-scrambler block for lane 3" line.long 0x10 "SCRAMBLING_SEED4,De-scrambler seed for lane4." hexmask.long.word 0x10 0.--15. 1. "scramble_seed_lane4,Seed used by De-scrambler block for lane 4" tree.end tree "CAMERA_DSI" base ad:0x4ACF0000 rgroup.long 0x0++0x3 line.long 0x0 "VERSION,Core Version" hexmask.long 0x0 0.--31. 1. "version,This field indicates the version of the MIPI DSI host" group.long 0x4++0x17 line.long 0x0 "PWR_UP,Power up" hexmask.long 0x0 1.--31. 1. "reserved_31_1,Reserved and read as zero" newline bitfld.long 0x0 0. "shutdownz,This bit configures the controller either to power up or to reset" "0: Reset the controller,1: Power up the controller" line.long 0x4 "CLKMGR_CFG,Factor for internal dividers" hexmask.long.word 0x4 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.byte 0x4 8.--15. 1. "to_clk_division,Time out clock division" newline hexmask.long.byte 0x4 0.--7. 1. "tx_esc_clk_division,This field indicates the division factor for the TX Escape clock source (lanebyteclk)" line.long 0x8 "DPI_VCID,DPI Virtual Channel ID" hexmask.long 0x8 2.--31. 1. "reserved_31_2,Reserved and read as zero" newline bitfld.long 0x8 0.--1. "dpi_vcid,This field configures the DPI virtual channel id that is indexed to the Video mode packets" "0,1,2,3" line.long 0xC "DPI_COLOR_CODING,DPI color coding" hexmask.long.tbyte 0xC 9.--31. 1. "reserved_31_9,Reserved and read as zero" newline bitfld.long 0xC 8. "loosely18_en,When set to 1 this bit activates loosely packed variant to 18-bit configurations" "0,1" newline hexmask.long.byte 0xC 4.--7. 1. "reserved_7_4,Reserved and read as zero" newline hexmask.long.byte 0xC 0.--3. 1. "dpi_color_coding,This field configures the DPI color for Video Mode/eDPI Command Mode coding as follows:" line.long 0x10 "DPI_CFG_POL,DPI signals polarity" hexmask.long 0x10 5.--31. 1. "reserved_31_5,Reserved and read as zero" newline bitfld.long 0x10 4. "colorm_active_low,When set to 1 this bit configures the color mode pin (dpicolorm) as active low" "0,1" newline bitfld.long 0x10 3. "shutd_active_low,When set to 1 this bit configures the shutdown pin (dpishutdn) as active low" "0,1" newline bitfld.long 0x10 2. "hsync_active_low,When set to 1 this bit configures the horizontal synchronism pin (dpihsync) as active low" "0,1" newline bitfld.long 0x10 1. "vsync_active_low,When set to 1 this bit configures the vertical synchronism pin (dpivsync) as active low" "0,1" newline bitfld.long 0x10 0. "dataen_active_low,When set to 1 this bit configures the data enable pin (dpidataen) as active low" "0,1" line.long 0x14 "DPI_LP_CMD_TIM,Low Power commands' timing" hexmask.long.byte 0x14 24.--31. 1. "reserved_31_24,Reserved and read as zero" newline hexmask.long.byte 0x14 16.--23. 1. "outvact_lpcmd_time,This field is used for the transmission of commands in low-power mode" newline hexmask.long.byte 0x14 8.--15. 1. "reserved_15_8,Reserved and read as zero" newline hexmask.long.byte 0x14 0.--7. 1. "invact_lpcmd_time,This field is used for the transmission of commands in low-power mode" group.long 0x2C++0x47 line.long 0x0 "PCKHDL_CFG,EoTp. BTA. CRC and ECC Configuration" hexmask.long 0x0 6.--31. 1. "reserved_31_6,Reserved and read as zero" newline bitfld.long 0x0 5. "eotp_tx_lp_en,When set to 1 this bit enables the EoTp transmission in low-power" "0,1" newline bitfld.long 0x0 4. "crc_rx_en,When set to 1 this bit enables the CRC reception and error reporting" "0,1" newline bitfld.long 0x0 3. "ecc_rx_en,When set to 1 this bit enables the ECC reception error correction and reporting" "0,1" newline bitfld.long 0x0 2. "bta_en,When set to 1 this bit enables the Bus Turn-Around (BTA) request" "0,1" newline bitfld.long 0x0 1. "eotp_rx_en,When set to 1 this bit enables the EoTp reception" "0,1" newline bitfld.long 0x0 0. "eotp_tx_en,When set to 1 this bit enables the EoTp transmission in high-speed" "0,1" line.long 0x4 "GEN_VCID,Read responses Virtual Channel ID" hexmask.long.word 0x4 18.--31. 1. "reserved_31_18,Reserved and read as zero" newline bitfld.long 0x4 16.--17. "gen_vcid_tx_auto,This field indicates the Generic interface virtual channel identification where generic packet is automatically generated & transmitted" "0,1,2,3" newline hexmask.long.byte 0x4 10.--15. 1. "reserved_15_10,Reserved and read as zero" newline bitfld.long 0x4 8.--9. "gen_vcid_tear_auto,This field indicates the virtual channel identification for tear effect by hardware" "0,1,2,3" newline hexmask.long.byte 0x4 2.--7. 1. "reserved_7_2,Reserved and read as zero" newline bitfld.long 0x4 0.--1. "gen_vcid_rx,This field indicates the Generic interface read-back virtual channel identification" "0,1,2,3" line.long 0x8 "MODE_CFG,Operation mode" hexmask.long 0x8 1.--31. 1. "reserved_31_1,Reserved and read as zero" newline bitfld.long 0x8 0. "cmd_video_mode,This bit configures the operation mode:" "0: video mode,1: command mode" line.long 0xC "VID_MODE_CFG,Video mode configuration" hexmask.long.byte 0xC 25.--31. 1. "reserved_31_25,Reserved and read as zero" newline bitfld.long 0xC 24. "vpg_orientation,This field indicates the color bar orientation as follows:" "0: Vertical mode,1: Horizontal mode" newline rbitfld.long 0xC 21.--23. "reserved_23_21,Reserved and read as zero" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 20. "vpg_mode,This field is to select the pattern:" "0: horizontal or vertical,1: vertical only" newline rbitfld.long 0xC 17.--19. "reserved_19_17,Reserved and read as zero" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 16. "vpg_en,When set to 1 this bit enables the video mode pattern generator" "0,1" newline bitfld.long 0xC 15. "lp_cmd_en,When set to 1 this bit enables the command transmission only in low-power mode" "0,1" newline bitfld.long 0xC 14. "frame_bta_ack_en,When set to 1 this bit enables the request for an acknowledge response at the end of a frame" "0,1" newline bitfld.long 0xC 13. "lp_hfp_en,When set to 1 this bit enables the return to low-power inside the HFP period when timing allows" "0,1" newline bitfld.long 0xC 12. "lp_hbp_en,When set to 1 this bit enables the return to low-power inside the HBP period when timing allows" "0,1" newline bitfld.long 0xC 11. "lp_vact_en,When set to 1 this bit enables the return to low-power inside the VACT period when timing allows" "0,1" newline bitfld.long 0xC 10. "lp_vfp_en,When set to 1 this bit enables the return to low-power inside the VFP period when timing allows" "0,1" newline bitfld.long 0xC 9. "lp_vbp_en,When set to 1 this bit enables the return to low-power inside the VBP period when timing allows" "0,1" newline bitfld.long 0xC 8. "lp_vsa_en,When set to 1 this bit enables the return to low-power inside the VSA period when timing allows" "0,1" newline hexmask.long.byte 0xC 2.--7. 1. "reserved_7_2,Reserved and read as zero" newline bitfld.long 0xC 0.--1. "vid_mode_type,This field indicates the video mode transmission type as follows:" "0: Non-burst with sync pulses,1: Non-burst with sync events,2: Burst mode,3: Burst mode" line.long 0x10 "VID_PKT_SIZE,Video Packets size" hexmask.long.tbyte 0x10 14.--31. 1. "reserved_31_14,Reserved and read as zero" newline hexmask.long.word 0x10 0.--13. 1. "vid_pkt_size,This field configures the number of pixels in a single video packet" line.long 0x14 "VID_NUM_CHUNKS,Number of Chunks" hexmask.long.tbyte 0x14 13.--31. 1. "reserved_31_13,Reserved and read as zero" newline hexmask.long.word 0x14 0.--12. 1. "vid_num_chunks,This register configures the number of chunks to be transmitted during a Line period (a chunk is pair made of a video packet and a null packet)" line.long 0x18 "VID_NULL_SIZE,Null Packets size" hexmask.long.tbyte 0x18 13.--31. 1. "reserved_31_13,Reserved and read as zero" newline hexmask.long.word 0x18 0.--12. 1. "vid_null_size,This register configures the number of bytes inside a null packet" line.long 0x1C "VID_HSA_TIME,HSA time" hexmask.long.tbyte 0x1C 12.--31. 1. "reserved_31_12,Reserved and read as zero" newline hexmask.long.word 0x1C 0.--11. 1. "vid_hsa_time,This field configures the Horizontal Synchronism Active period in lane byte clock cycles" line.long 0x20 "VID_HBP_TIME,HBP time" hexmask.long.tbyte 0x20 12.--31. 1. "reserved_31_12,Reserved and read as zero" newline hexmask.long.word 0x20 0.--11. 1. "vid_hbp_time,This field configures the Horizontal Back Porch period in lane byte clock cycles" line.long 0x24 "VID_HLINE_TIME,Overall video line time" hexmask.long.tbyte 0x24 15.--31. 1. "reserved_31_15,Reserved and read as zero" newline hexmask.long.word 0x24 0.--14. 1. "vid_hline_time,This field configures the size of the total line time (HSA+HBP+HACT+HFP) counted in lane byte clock cycles" line.long 0x28 "VID_VSA_LINES,VSA period" hexmask.long.tbyte 0x28 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline hexmask.long.word 0x28 0.--9. 1. "vsa_lines,This field configures the Vertical Synchronism Active period measured in number of horizontal lines" line.long 0x2C "VID_VBP_LINES,VBP period" hexmask.long.tbyte 0x2C 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline hexmask.long.word 0x2C 0.--9. 1. "vbp_lines,This field configures the Vertical Back Porch period measured in number of horizontal lines" line.long 0x30 "VID_VFP_LINES,VFP period" hexmask.long.tbyte 0x30 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline hexmask.long.word 0x30 0.--9. 1. "vfp_lines,This field configures the Vertical Front Porch period measured in number of horizontal lines" line.long 0x34 "VID_VACTIVE_LINES,Video vertical resolution" hexmask.long.tbyte 0x34 14.--31. 1. "reserved_31_14,Reserved and read as zero" newline hexmask.long.word 0x34 0.--13. 1. "v_active_lines,This field configures the Vertical Active period measured in number of horizontal lines" line.long 0x38 "EDPI_CMD_SIZE,eDPI packets size" hexmask.long.word 0x38 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.word 0x38 0.--15. 1. "edpi_allowed_cmd_size,This field configures the maximum allowed size for an eDPI write memory command measured in pixels" line.long 0x3C "CMD_MODE_CFG,Command Mode operation configuration" hexmask.long.byte 0x3C 25.--31. 1. "reserved_31_25,Reserved and read as zero" newline bitfld.long 0x3C 24. "max_rd_pkt_size,This bit configures the maximum read packet size command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline hexmask.long.byte 0x3C 20.--23. 1. "reserved_23_20,Reserved and read as zero" newline bitfld.long 0x3C 19. "dcs_lw_tx,This bit configures the DCS long write packet command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 18. "dcs_sr_0p_tx,This bit configures the DCS short read packet with zero parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 17. "dcs_sw_1p_tx,This bit configures the DCS short write packet with one parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 16. "dcs_sw_0p_tx,This bit configures the DCS short write packet with zero parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline rbitfld.long 0x3C 15. "reserved_15,Reserved and read as zero" "0,1" newline bitfld.long 0x3C 14. "gen_lw_tx,This bit configures the Generic long write packet command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 13. "gen_sr_2p_tx,This bit configures the Generic short read packet with two parameters command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 12. "gen_sr_1p_tx,This bit configures the Generic short read packet with one parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 11. "gen_sr_0p_tx,This bit configures the Generic short read packet with zero parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 10. "gen_sw_2p_tx,This bit configures the Generic short write packet with two parameters command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 9. "gen_sw_1p_tx,This bit configures the Generic short write packet with one parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline bitfld.long 0x3C 8. "gen_sw_0p_tx,This bit configures the Generic short write packet with zero parameter command transmission type:" "0: Transition type is high-speed,1: Transition type is low-power" newline hexmask.long.byte 0x3C 2.--7. 1. "reserved_7_2,Reserved and read as zero" newline bitfld.long 0x3C 1. "ack_rqst_en,When set to 1 this bit enables the acknowledge request after each packet transmission" "0,1" newline bitfld.long 0x3C 0. "tear_fx_en,When set to 1 this bit enables the tearing effect acknowledge request" "0,1" line.long 0x40 "GEN_HDR,Generic Interface Packet Header" hexmask.long.byte 0x40 24.--31. 1. "reserved_31_24,Reserved and read as zero" newline hexmask.long.byte 0x40 16.--23. 1. "gen_wc_msbyte,This field configures the most significant byte of the header packet's word count for long packets or data 1 for short packets" newline hexmask.long.byte 0x40 8.--15. 1. "gen_wc_lsbyte,This field configures the least significant byte of the header packet's Word count for long packets or data 0 for short packets" newline bitfld.long 0x40 6.--7. "gen_vc,This field configures the Virtual Channel ID of the header packet" "0,1,2,3" newline hexmask.long.byte 0x40 0.--5. 1. "gen_dt,This field configures the packet Data Type of the header packet" line.long 0x44 "GEN_PLD_DATA,Generic Interface Packets Payload" hexmask.long.byte 0x44 24.--31. 1. "gen_pld_b4,This field indicates byte 4 of the packet payload" newline hexmask.long.byte 0x44 16.--23. 1. "gen_pld_b3,This field indicates byte 3 of the packet payload" newline hexmask.long.byte 0x44 8.--15. 1. "gen_pld_b2,This field indicates byte 2 of the packet payload" newline hexmask.long.byte 0x44 0.--7. 1. "gen_pld_b1,This field indicates byte 1 of the packet payload" rgroup.long 0x74++0x3 line.long 0x0 "CMD_PKT_STATUS,Generic Interface and DBI FIFO status" hexmask.long.byte 0x0 28.--31. 1. "reserved_31_28,Reserved and read as zero" newline bitfld.long 0x0 27. "reserved_27,Reserved and read as zero" "0,1" newline bitfld.long 0x0 26. "reserved_26,Reserved and read as zero" "0,1" newline bitfld.long 0x0 25. "reserved_25,Reserved and read as zero" "0,1" newline bitfld.long 0x0 24. "reserved_24,Reserved and read as zero" "0,1" newline hexmask.long.byte 0x0 20.--23. 1. "reserved_23_20,Reserved and read as zero" newline bitfld.long 0x0 19. "gen_buff_pld_full,This bit indicates the full status of the generic payload internal buffer" "0,1" newline bitfld.long 0x0 18. "gen_buff_pld_empty,This bit indicates the empty status of the generic payload internal buffer" "0,1" newline bitfld.long 0x0 17. "gen_buff_cmd_full,This bit indicates the full status of the generic command internal buffer" "0,1" newline bitfld.long 0x0 16. "gen_buff_cmd_empty,This bit indicates the empty status of the generic command internal buffer" "0,1" newline bitfld.long 0x0 15. "reserved_15,Reserved and read as zero" "0,1" newline bitfld.long 0x0 14. "reserved_14,Reserved and read as zero" "0,1" newline bitfld.long 0x0 13. "reserved_13,Reserved and read as zero" "0,1" newline bitfld.long 0x0 12. "reserved_12,Reserved and read as zero" "0,1" newline bitfld.long 0x0 11. "reserved_11,Reserved and read as zero" "0,1" newline bitfld.long 0x0 10. "reserved_10,Reserved and read as zero" "0,1" newline bitfld.long 0x0 9. "reserved_9,Reserved and read as zero" "0,1" newline bitfld.long 0x0 8. "reserved_8,Reserved and read as zero" "0,1" newline bitfld.long 0x0 7. "reserved_7,Reserved and read as zero" "0,1" newline bitfld.long 0x0 6. "gen_rd_cmd_busy,This bit is set when a read command is issued and cleared when the entire response is stored in the FIFO for GENERIC interface" "0,1" newline bitfld.long 0x0 5. "gen_pld_r_full,This bit indicates the full status of the generic read payload FIFO" "0,1" newline bitfld.long 0x0 4. "gen_pld_r_empty,This bit indicates the empty status of the generic read payload FIFO" "0,1" newline bitfld.long 0x0 3. "gen_pld_w_full,This bit indicates the full status of the generic write payload FIFO" "0,1" newline bitfld.long 0x0 2. "gen_pld_w_empty,This bit indicates the empty status of the generic write payload FIFO" "0,1" newline bitfld.long 0x0 1. "gen_cmd_full,This bit indicates the full status of the generic command FIFO" "0,1" newline bitfld.long 0x0 0. "gen_cmd_empty,This bit indicates the empty status of the generic command FIFO" "0,1" group.long 0x78++0x37 line.long 0x0 "TO_CNT_CFG,Timeout Trigger Configuration" hexmask.long.word 0x0 16.--31. 1. "hstx_to_cnt,This field configures the timeout counter that triggers a high-speed transmission timeout contention detection (measured in TO_CLK_DIVISION cycles)" newline hexmask.long.word 0x0 0.--15. 1. "lprx_to_cnt,This field configures the timeout counter that triggers a low-power reception timeout contention detection (measured in TO_CLK_DIVISION cycles)" line.long 0x4 "HS_RD_TO_CNT,Peripheral timeout after HS read operations" hexmask.long.word 0x4 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.word 0x4 0.--15. 1. "hs_rd_to_cnt,This field sets a period for which MIPI DSI host keeps the link still after sending a high-speed Read operation" line.long 0x8 "LP_RD_TO_CNT,Peripheral timeout after LP read operations" hexmask.long.word 0x8 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.word 0x8 0.--15. 1. "lp_rd_to_cnt,This field sets a period for which MIPI DSI host keeps the link still after sending a low-power Read operation" line.long 0xC "HS_WR_TO_CNT,Peripheral timeout after HS write operations" hexmask.long.byte 0xC 25.--31. 1. "reserved_31_25,Reserved and read as zero" newline bitfld.long 0xC 24. "presp_to_mode,presp_to_mode" "0,1" newline hexmask.long.byte 0xC 16.--23. 1. "reserved_23_16,Reserved and read as zero" newline hexmask.long.word 0xC 0.--15. 1. "hs_wr_to_cnt,This field sets a period for which MIPI DSI host keeps the link still after sending a high-speed Write operation" line.long 0x10 "LP_WR_TO_CNT,Peripheral timeout after LP write operations" hexmask.long.word 0x10 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.word 0x10 0.--15. 1. "lp_wr_to_cnt,This field sets a period for which MIPI DSI host keeps the link still after sending a low-power Write operation" line.long 0x14 "BTA_TO_CNT,Peripheral timeout after BTA completion" hexmask.long.word 0x14 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.word 0x14 0.--15. 1. "bta_to_cnt,This field sets a period for which MIPI DSI host keeps the link still after completing a Bus Turnaround" line.long 0x18 "SDF_3D,3D information for VSS packets" hexmask.long.word 0x18 17.--31. 1. "reserved_31_17,Reserved and read as zero" newline bitfld.long 0x18 16. "send_3d_cfg,When set causes the next VSS packet to include 3D control payload in every VSS packet" "0,1" newline hexmask.long.word 0x18 6.--15. 1. "reserved_15_6,Reserved and read as zero" newline bitfld.long 0x18 5. "right_first,This bit defines the left/right order:" "0: left eye is sent first then right eye,1: right eye data is sent first then left eye" newline bitfld.long 0x18 4. "second_vsync,This field defines whether there is a second VSYNC pulse between Left and Right Images when 3D Image Format is Frame-based:" "0: No sync pulses between left and right data,1: Sync pulse HSYNC VSYNC blanking between left and.." newline bitfld.long 0x18 2.--3. "format_3d,This field defines 3D Image Format:" "0: Alternating lines of left and right data,1: Alternating frames of left and right data,2: Alternating pixels of left and right data,?" newline bitfld.long 0x18 0.--1. "mode_3d,This field defines 3D Mode On/Off and Display Orientation:" "0: 3D Mode Off 2D Mode On,1: 3D Mode On Portrait Orientation,2: 3D Mode On Landscape Orientation,?" line.long 0x1C "LPCLK_CTRL,Non-continuous Clock configuration" hexmask.long 0x1C 2.--31. 1. "reserved_31_2,Reserved and read as zero" newline bitfld.long 0x1C 1. "auto_clklane_ctrl,This bit enables the automatic mechanism to stop providing clock in the clock lane when time allows" "0,1" newline bitfld.long 0x1C 0. "phy_txrequestclkhs,This bit controls the D-PHY PPI txrequestclkhs signal" "0,1" line.long 0x20 "PHY_TMR_LPCLK_CFG,Time configuration for (clock lane) transitions between HS and LP" hexmask.long.byte 0x20 26.--31. 1. "reserved_31_26,Reserved and read as zero" newline hexmask.long.word 0x20 16.--25. 1. "phy_clkhs2lp_time,High speed to low-power transmission time for D-PHY clock lane" newline hexmask.long.byte 0x20 10.--15. 1. "reserved_15_10,Reserved and read as zero" newline hexmask.long.word 0x20 0.--9. 1. "phy_clklp2hs_time,Low-Power to High speed transmission time for D-PHY clock lane" line.long 0x24 "PHY_TMR_CFG,Time configuration for (data lanes) transitions between HS and LP" hexmask.long.byte 0x24 26.--31. 1. "reserved_31_26,Reserved and read as zero" newline hexmask.long.word 0x24 16.--25. 1. "phy_hs2lp_time,High-speed to low-power transmission time for D-PHY data lanes" newline hexmask.long.byte 0x24 10.--15. 1. "reserved_15_10,Reserved and read as zero" newline hexmask.long.word 0x24 0.--9. 1. "phy_lp2hs_time,Low-power to high-speed transmission time for D-PHY data lanes" line.long 0x28 "PHY_RSTZ,D-PHY's PLL and Resets" hexmask.long 0x28 4.--31. 1. "reserved_31_4,Reserved and read as zero" newline bitfld.long 0x28 3. "phy_forcepll,When the D-PHY is in ULPS this bit enables the D-PHY PLL" "0,1" newline bitfld.long 0x28 2. "phy_enableclk,When set to 1 this bit enables the D-PHY Clock Lane Module" "0,1" newline bitfld.long 0x28 1. "phy_rstz,When set to 0 this bit places the digital section of the D-PHY in the reset state" "0,1" newline bitfld.long 0x28 0. "phy_shutdownz,When set to 0 this bit places the complete D-PHY macro in power-down state" "0,1" line.long 0x2C "PHY_IF_CFG,Active lanes and Stop State minimum time in Stop State" hexmask.long.word 0x2C 16.--31. 1. "reserved_31_16,Reserved and read as zero" newline hexmask.long.byte 0x2C 8.--15. 1. "phy_stop_wait_time,This field configures the minimum time PHY needs to stay in StopState before requesting an high-speed transmission" newline hexmask.long.byte 0x2C 2.--7. 1. "reserved_7_2,Reserved and read as zero" newline bitfld.long 0x2C 0.--1. "n_lanes,This field configures the number of active data lanes:" "0: lane 0,1: lanes 0 and 1,2: lanes 0 1 and 2,3: lanes 0 1 2 and 3" line.long 0x30 "PHY_ULPS_CTRL,Transitions from and to ULPS. using D-PHY" hexmask.long 0x30 4.--31. 1. "reserved_31_4,Reserved and read as zero" newline bitfld.long 0x30 3. "phy_txexitulpslan,ULPS mode Exit on all active data lanes" "0,1" newline bitfld.long 0x30 2. "phy_txrequlpslan,ULPS mode Request on all active data lanes" "0,1" newline bitfld.long 0x30 1. "phy_txexitulpsclk,ULPS mode Exit on clock lane" "0,1" newline bitfld.long 0x30 0. "phy_txrequlpsclk,ULPS mode Request on clock lane" "0,1" line.long 0x34 "PHY_TX_TRIGGERS,Pins related to D-PHY triggers" hexmask.long 0x34 4.--31. 1. "reserved_31_4,Reserved and read as zero" newline hexmask.long.byte 0x34 0.--3. 1. "phy_tx_triggers,This field controls the trigger transmissions" rgroup.long 0xB0++0x3 line.long 0x0 "PHY_STATUS,D-PHY Status" hexmask.long.tbyte 0x0 13.--31. 1. "reserved_31_13,Reserved and read as zero" newline bitfld.long 0x0 12. "phy_ulpsactivenot3lane,This bit indicates the status of ulpsactivenot3lane D-PHY signal" "0,1" newline bitfld.long 0x0 11. "phy_stopstate3lane,This bit indicates the status of phystopstate3lane D-PHY signal" "0,1" newline bitfld.long 0x0 10. "phy_ulpsactivenot2lane,This bit indicates the status of ulpsactivenot2lane D-PHY signal" "0,1" newline bitfld.long 0x0 9. "phy_stopstate2lane,This bit indicates the status of phystopstate2lane D-PHY signal" "0,1" newline bitfld.long 0x0 8. "phy_ulpsactivenot1lane,This bit indicates the status of ulpsactivenot1lane D-PHY signal" "0,1" newline bitfld.long 0x0 7. "phy_stopstate1lane,This bit indicates the status of phystopstate1lane D-PHY signal" "0,1" newline bitfld.long 0x0 6. "phy_rxulpsesc0lane,This bit indicates the status of rxulpsesc0lane D-PHY signal" "0,1" newline bitfld.long 0x0 5. "phy_ulpsactivenot0lane,This bit indicates the status of ulpsactivenot0lane D-PHY signal" "0,1" newline bitfld.long 0x0 4. "phy_stopstate0lane,This bit indicates the status of phystopstate0lane D-PHY signal" "0,1" newline bitfld.long 0x0 3. "phy_ulpsactivenotclk,This bit indicates the status of phyulpsactivenotclk D-PHY signal" "0,1" newline bitfld.long 0x0 2. "phy_stopstateclklane,This bit indicates the status of phystopstateclklane D-PHY signal" "0,1" newline bitfld.long 0x0 1. "phy_direction,This bit indicates the status of phydirection D-PHY signal" "0,1" newline bitfld.long 0x0 0. "phy_lock,This bit indicates the status of phylock D-PHY signal" "0,1" group.long 0xB4++0x7 line.long 0x0 "PHY_TST_CTRL0,D-PHY control and clear pins" hexmask.long 0x0 2.--31. 1. "reserved_31_2,Reserved and read as zero" newline bitfld.long 0x0 1. "phy_testclk,This bit is used to clock the TX TESTDIN bus into the D-PHY" "0,1" newline bitfld.long 0x0 0. "phy_testclr,Bi-Dir D-PHY TX test interface clear (active high)" "0,1" line.long 0x4 "PHY_TST_CTRL1,D-PHY data and enable pins" hexmask.long.word 0x4 18.--31. 1. "reserved_31_18,Reserved and read as zero" newline bitfld.long 0x4 17. "reserved_17,Reserved and read as zero" "0,1" newline bitfld.long 0x4 16. "phy_testen,PHY test interface operation selector:" "0: the data write operation is set on the rising..,1: the address write operation is set on the.." newline hexmask.long.byte 0x4 8.--15. 1. "pht_testdout,PHY output 8-bit data bus for read-back and internal probing functionalities" newline hexmask.long.byte 0x4 0.--7. 1. "phy_testdin,PHY test interface input 8-bit data bus for internal register programming and test functionalities access" rgroup.long 0xBC++0x7 line.long 0x0 "INT_ST0,Interrupts status 0" hexmask.long.word 0x0 21.--31. 1. "reserved_31_21,Reserved and read as zero" newline bitfld.long 0x0 20. "dphy_errors_4,This bit indicates LP1 contention error ErrContentionLP1 from Lane 0" "0,1" newline bitfld.long 0x0 19. "dphy_errors_3,This bit indicates LP0 contention error ErrContentionLP0 from Lane 0" "0,1" newline bitfld.long 0x0 18. "dphy_errors_2,This bit indicates control error ErrControl from Lane 0" "0,1" newline bitfld.long 0x0 17. "dphy_errors_1,This bit indicates ErrSyncEsc low-power data transmission synchronization error from Lane 0" "0,1" newline bitfld.long 0x0 16. "dphy_errors_0,This bit indicates ErrEsc escape entry error from Lane 0" "0,1" newline bitfld.long 0x0 15. "ack_with_err_15,This bit retrieves the DSI protocol violation from the Acknowledge error report" "0,1" newline bitfld.long 0x0 14. "ack_with_err_14,This bit retrieves the reserved (specific to device) from the Acknowledge error report" "0,1" newline bitfld.long 0x0 13. "ack_with_err_13,This bit retrieves the invalid transmission length from the Acknowledge error report" "0,1" newline bitfld.long 0x0 12. "ack_with_err_12,This bit retrieves the DSI VC ID Invalid from the Acknowledge error report" "0,1" newline bitfld.long 0x0 11. "ack_with_err_11,This bit retrieves the not recognized DSI data type from the Acknowledge error report" "0,1" newline bitfld.long 0x0 10. "ack_with_err_10,This bit retrieves the checksum error (long packet only) from the Acknowledge error report" "0,1" newline bitfld.long 0x0 9. "ack_with_err_9,This bit retrieves the ECC error multi-bit (detected not corrected) from the Acknowledge error report" "0,1" newline bitfld.long 0x0 8. "ack_with_err_8,This bit retrieves the ECC error single-bit (detected and corrected) from the Acknowledge error report" "0,1" newline bitfld.long 0x0 7. "ack_with_err_7,This bit retrieves the Contention Detected error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 6. "ack_with_err_6,This bit retrieves the False Control error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 5. "ack_with_err_5,This bit retrieves the Peripheral Timeout error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 4. "ack_with_err_4,This bit retrieves the low-power Transmit Sync error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 3. "ack_with_err_3,This bit retrieves the Escape Mode Entry Command error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 2. "ack_with_err_2,This bit retrieves the EoT Sync error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 1. "ack_with_err_1,This bit retrieves the SoT Sync error from the Acknowledge error report" "0,1" newline bitfld.long 0x0 0. "ack_with_err_0,This bit retrieves the SoT error from the Acknowledge error report" "0,1" line.long 0x4 "INT_ST1,Interrupts Status 1" hexmask.long.word 0x4 21.--31. 1. "reserved_31_21,Reserved and read as zero" newline bitfld.long 0x4 20. "tear_request_err,This bit indicates that tear_request has occurred but tear effect is not active in DSI host and device" "0,1" newline bitfld.long 0x4 19. "dpi_buff_pld_under,This bit indicates that an underflow has occurred when reading payload to build DSI packet for video mode" "0,1" newline bitfld.long 0x4 18. "reserved_18,Reserved and read as zero" "0,1" newline bitfld.long 0x4 17. "reserved_17,Reserved and read as zero" "0,1" newline bitfld.long 0x4 16. "reserved_16,Reserved and read as zero" "0,1" newline bitfld.long 0x4 15. "reserved_15,Reserved and read as zero" "0,1" newline bitfld.long 0x4 14. "reserved_14,Reserved and read as zero" "0,1" newline bitfld.long 0x4 13. "reserved_13,Reserved and read as zero" "0,1" newline bitfld.long 0x4 12. "gen_pld_recev_err,This bit indicates that during a generic interface packet read back the payload FIFO becomes full and the received data is corrupted" "0,1" newline bitfld.long 0x4 11. "gen_pld_rd_err,This bit indicates that during a DCS read data the payload FIFO becomes empty and the data sent to the interface is corrupted" "0,1" newline bitfld.long 0x4 10. "gen_pld_send_err,This bit indicates that during a Generic interface packet build the payload FIFO becomes empty and corrupt data is sent" "0,1" newline bitfld.long 0x4 9. "gen_pld_wr_err,This bit indicates that the system tried to write a payload data through the Generic interface and the FIFO is full" "0,1" newline bitfld.long 0x4 8. "gen_cmd_wr_err,This bit indicates that the system tried to write a command through the Generic interface and the FIFO is full" "0,1" newline bitfld.long 0x4 7. "dpi_pld_wr_err,This bit indicates that during a DPI pixel line storage the payload FIFO becomes full and the data stored is corrupted" "0,1" newline bitfld.long 0x4 6. "eopt_err,This bit indicates that the EoTp packet has not been received at the end of the incoming peripheral transmission" "0,1" newline bitfld.long 0x4 5. "pkt_size_err,This bit indicates that the packet size error has been detected during the packet reception" "0,1" newline bitfld.long 0x4 4. "crc_err,This bit indicates that the CRC error has been detected in the received packet payload" "0,1" newline bitfld.long 0x4 3. "ecc_multpl_err,This bit indicates that the ECC multiple error has been detected in a received packet" "0,1" newline bitfld.long 0x4 2. "ecc_single_err,This bit indicates that the ECC single error has been detected and corrected in a received packet" "0,1" newline bitfld.long 0x4 1. "to_lp_rx,This bit indicates that the low-power reception timeout counter reached the end and contention has been detected" "0,1" newline bitfld.long 0x4 0. "to_hs_tx,This bit indicates that the high-speed transmission timeout counter reached the end and contention has been detected" "0,1" group.long 0xC4++0xB line.long 0x0 "INT_MSK0,INT_ST0 mask" hexmask.long.word 0x0 21.--31. 1. "reserved_31_21,Reserved and read as zero" newline bitfld.long 0x0 20. "mask_dphy_errors_4,Mask for dphy_errors_4" "0,1" newline bitfld.long 0x0 19. "mask_dphy_errors_3,Mask for dphy_errors_3" "0,1" newline bitfld.long 0x0 18. "mask_dphy_errors_2,Mask for dphy_errors_2" "0,1" newline bitfld.long 0x0 17. "mask_dphy_errors_1,Mask for dphy_errors_1" "0,1" newline bitfld.long 0x0 16. "mask_dphy_errors_0,Mask for dphy_errors_0" "0,1" newline bitfld.long 0x0 15. "mask_ack_with_err_15,Mask for ack_with_err_15" "0,1" newline bitfld.long 0x0 14. "mask_ack_with_err_14,Mask for ack_with_err_14" "0,1" newline bitfld.long 0x0 13. "mask_ack_with_err_13,Mask for ack_with_err_13" "0,1" newline bitfld.long 0x0 12. "mask_ack_with_err_12,Mask for ack_with_err_12" "0,1" newline bitfld.long 0x0 11. "mask_ack_with_err_11,Mask for ack_with_err_11" "0,1" newline bitfld.long 0x0 10. "mask_ack_with_err_10,Mask for ack_with_err_10" "0,1" newline bitfld.long 0x0 9. "mask_ack_with_err_9,Mask for ack_with_err_9" "0,1" newline bitfld.long 0x0 8. "mask_ack_with_err_8,Mask for ack_with_err_8" "0,1" newline bitfld.long 0x0 7. "mask_ack_with_err_7,Mask for ack_with_err_7" "0,1" newline bitfld.long 0x0 6. "mask_ack_with_err_6,Mask for ack_with_err_6" "0,1" newline bitfld.long 0x0 5. "mask_ack_with_err_5,Mask for ack_with_err_5" "0,1" newline bitfld.long 0x0 4. "mask_ack_with_err_4,Mask for ack_with_err_4" "0,1" newline bitfld.long 0x0 3. "mask_ack_with_err_3,Mask for ack_with_err_3" "0,1" newline bitfld.long 0x0 2. "mask_ack_with_err_2,Mask for ack_with_err_2" "0,1" newline bitfld.long 0x0 1. "mask_ack_with_err_1,Mask for ack_with_err_1" "0,1" newline bitfld.long 0x0 0. "mask_ack_with_err_0,Mask for ack_with_err_0" "0,1" line.long 0x4 "INT_MSK1,INT_ST1 mask" hexmask.long.word 0x4 21.--31. 1. "reserved_31_21,Reserved and read as zero" newline bitfld.long 0x4 20. "mask_tear_request_err,Mask for tear_request_err" "0,1" newline bitfld.long 0x4 19. "mask_dpi_buff_pld_under,Mask for dpi_buff_pld_under" "0,1" newline rbitfld.long 0x4 18. "reserved_18,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 17. "reserved_17,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 16. "reserved_16,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 15. "reserved_15,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 14. "reserved_14,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 13. "reserved_13,Reserved and read as zero" "0,1" newline bitfld.long 0x4 12. "mask_gen_pld_recev_err,Mask for gen_pld_recev_err" "0,1" newline bitfld.long 0x4 11. "mask_gen_pld_rd_err,Mask for gen_pld_rd_err" "0,1" newline bitfld.long 0x4 10. "mask_gen_pld_send_err,Mask for gen_pld_send_err" "0,1" newline bitfld.long 0x4 9. "mask_gen_pld_wr_err,Mask for gen_pld_wr_err" "0,1" newline bitfld.long 0x4 8. "mask_gen_cmd_wr_err,Mask for gen_cmd_wr_err" "0,1" newline bitfld.long 0x4 7. "mask_dpi_pld_wr_err,Mask for dpi_pld_wr_err" "0,1" newline bitfld.long 0x4 6. "mask_eopt_err,Mask for eopt_err" "0,1" newline bitfld.long 0x4 5. "mask_pkt_size_err,Mask for pkt_size_err" "0,1" newline bitfld.long 0x4 4. "mask_crc_err,Mask for crc_err" "0,1" newline bitfld.long 0x4 3. "mask_ecc_multpl_err,Mask for ecc_multpl_err" "0,1" newline bitfld.long 0x4 2. "mask_ecc_single_err,Mask for ecc_single_err" "0,1" newline bitfld.long 0x4 1. "mask_to_lp_rx,Mask for to_lp_rx" "0,1" newline bitfld.long 0x4 0. "mask_to_hs_tx,Mask for to_hs_tx" "0,1" line.long 0x8 "PHY_CAL,D-PHY skew calibration" hexmask.long 0x8 1.--31. 1. "reserved_31_1,Reserved and read as zero" newline bitfld.long 0x8 0. "txskewcalhs,High-speed skew calibration is started when txskewcalhs is set high (assuming that PHY is in Stop state)" "0,1" group.long 0xD8++0x13 line.long 0x0 "INT_FORCE0,Force INT_ST0" hexmask.long.word 0x0 21.--31. 1. "reserved_31_21,Reserved and read as zero" newline bitfld.long 0x0 20. "force_dphy_errors_4,Force dphy_errors_4" "0,1" newline bitfld.long 0x0 19. "force_dphy_errors_3,Force dphy_errors_3" "0,1" newline bitfld.long 0x0 18. "force_dphy_errors_2,Force dphy_errors_2" "0,1" newline bitfld.long 0x0 17. "force_dphy_errors_1,Force dphy_errors_1" "0,1" newline bitfld.long 0x0 16. "force_dphy_errors_0,Force dphy_errors_0" "0,1" newline bitfld.long 0x0 15. "force_ack_with_err_15,Force ack_with_err_15" "0,1" newline bitfld.long 0x0 14. "force_ack_with_err_14,Force ack_with_err_14" "0,1" newline bitfld.long 0x0 13. "force_ack_with_err_13,Force ack_with_err_13" "0,1" newline bitfld.long 0x0 12. "force_ack_with_err_12,Force ack_with_err_12" "0,1" newline bitfld.long 0x0 11. "force_ack_with_err_11,Force ack_with_err_11" "0,1" newline bitfld.long 0x0 10. "force_ack_with_err_10,Force ack_with_err_10" "0,1" newline bitfld.long 0x0 9. "force_ack_with_err_9,Force ack_with_err_9" "0,1" newline bitfld.long 0x0 8. "force_ack_with_err_8,Force ack_with_err_8" "0,1" newline bitfld.long 0x0 7. "force_ack_with_err_7,Force ack_with_err_7" "0,1" newline bitfld.long 0x0 6. "force_ack_with_err_6,Force ack_with_err_6" "0,1" newline bitfld.long 0x0 5. "force_ack_with_err_5,Force ack_with_err_5" "0,1" newline bitfld.long 0x0 4. "force_ack_with_err_4,Force ack_with_err_4" "0,1" newline bitfld.long 0x0 3. "force_ack_with_err_3,Force ack_with_err_3" "0,1" newline bitfld.long 0x0 2. "force_ack_with_err_2,Force ack_with_err_2" "0,1" newline bitfld.long 0x0 1. "force_ack_with_err_1,Force ack_with_err_1" "0,1" newline bitfld.long 0x0 0. "force_ack_with_err_0,Force ack_with_err_0" "0,1" line.long 0x4 "INT_FORCE1,Force INT_ST1" hexmask.long.word 0x4 21.--31. 1. "reserved_31_21,Reserved and read as zero" newline bitfld.long 0x4 20. "force_tear_request_err,Force for tear_request_err" "0,1" newline bitfld.long 0x4 19. "force_dpi_buff_pld_under,Force for dpi_buff_pld_under" "0,1" newline rbitfld.long 0x4 18. "reserved_18,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 17. "reserved_17,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 16. "reserved_16,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 15. "reserved_15,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 14. "reserved_14,Reserved and read as zero" "0,1" newline rbitfld.long 0x4 13. "reserved_13,Reserved and read as zero" "0,1" newline bitfld.long 0x4 12. "force_gen_pld_recev_err,Force gen_pld_recev_err" "0,1" newline bitfld.long 0x4 11. "force_gen_pld_rd_err,Force gen_pld_rd_err" "0,1" newline bitfld.long 0x4 10. "force_gen_pld_send_err,Force gen_pld_send_err" "0,1" newline bitfld.long 0x4 9. "force_gen_pld_wr_err,Force gen_pld_wr_err" "0,1" newline bitfld.long 0x4 8. "force_gen_cmd_wr_err,Force gen_cmd_wr_err" "0,1" newline bitfld.long 0x4 7. "force_dpi_pld_wr_err,Force dpi_pld_wr_err" "0,1" newline bitfld.long 0x4 6. "force_eopt_err,Force eopt_err" "0,1" newline bitfld.long 0x4 5. "force_pkt_size_err,Force pkt_size_err" "0,1" newline bitfld.long 0x4 4. "force_crc_err,Force crc_err" "0,1" newline bitfld.long 0x4 3. "force_ecc_multpl_err,Force ecc_multpl_err" "0,1" newline bitfld.long 0x4 2. "force_ecc_single_err,Force ecc_single_err" "0,1" newline bitfld.long 0x4 1. "force_to_lp_rx,Force to_lp_rx" "0,1" newline bitfld.long 0x4 0. "force_to_hs_tx,Force to_hs_tx" "0,1" line.long 0x8 "AUTO_ULPS_MODE,Automatic ULPS control" hexmask.long.word 0x8 18.--31. 1. "reserved_31_18,Reserved and read as zero" newline bitfld.long 0x8 17. "pre_pll_off_req,When pll_off_ulps is active allows to turn off PLL before the request to enter in ULPS" "0,1" newline bitfld.long 0x8 16. "pll_off_ulps,Turn off the D-PHY PLL during ULPS" "0,1" newline hexmask.long.word 0x8 1.--15. 1. "reserved_15_1,Reserved and read as zero" newline bitfld.long 0x8 0. "auto_ulps,This bit enables the automatic mechanism to enter and exit ULPS" "0,1" line.long 0xC "AUTO_ULPS_ENTRY_DELAY,ULPS transition delay" hexmask.long 0xC 0.--31. 1. "ulps_entry_delay,Configures the delay (in lanebyteclk) to wait before entering ULPS" line.long 0x10 "AUTO_ULPS_WAKEUP_TIME,D-PHY wakeup time" hexmask.long.word 0x10 16.--31. 1. "twakeup_cnt,Twakeup counter" newline hexmask.long.word 0x10 0.--15. 1. "twakeup_clk_div,Twakeup clock divider" group.long 0xF0++0xB line.long 0x0 "DSC_PARAMETER,Display Stream Compression" hexmask.long.word 0x0 18.--31. 1. "reserved_31_18,Reserved and read as zero" newline bitfld.long 0x0 16.--17. "pps_sel,This field indicates the PPS selector:" "0: PPS Table 1,1: PPS Table 2,2: PPS Table 3,3: PPS Table 4" newline hexmask.long.byte 0x0 10.--15. 1. "reserved_15_10,Reserved and read as zero" newline bitfld.long 0x0 8.--9. "compress_algo,This field indicates the algorithm identifier:" "0: VESA DSC Standard 1.1,?,?,3: vendor-specific algorithm" newline hexmask.long.byte 0x0 1.--7. 1. "reserved_7_1,Reserved and read as zero" newline bitfld.long 0x0 0. "compression_mode,When set to 1 this bit enables the compression mode" "0,1" line.long 0x4 "PHY_TMR_RD_CFG,PHY timings" hexmask.long.tbyte 0x4 15.--31. 1. "reserved_31_15,Reserved and read as zero" newline hexmask.long.word 0x4 0.--14. 1. "max_rd_time,This field configures the maximum time required to perform a read command in lane byte clock cycles" line.long 0x8 "AUTO_ULPS_MIN_TIME,PHY Timings - Transition between ulpsactivenot and ulpsexitreq" hexmask.long.tbyte 0x8 12.--31. 1. "reserved_31_12,Reserved and read as zero" newline hexmask.long.word 0x8 0.--11. 1. "ulps_min_time,Configures the minimum time required by PHY between ulpsactivenot and ulpsexitreq for clock and data lane" group.long 0x100++0x3 line.long 0x0 "VID_SHADOW_CTRL,DPI Shadow Feature" hexmask.long.word 0x0 17.--31. 1. "reserved_31_17,Reserved and read as zero" newline bitfld.long 0x0 16. "vid_shadow_pin_req,When set to 1 the video request is done by external pin" "0,1" newline hexmask.long.byte 0x0 9.--15. 1. "reserved_15_9,Reserved and read as zero" newline bitfld.long 0x0 8. "vid_shadow_req,When set to 1 this bit request that the dpi registers from regbank are copied to the auxiliary registers" "0,1" newline hexmask.long.byte 0x0 1.--7. 1. "reserved_7_1,Reserved and read as zero" newline bitfld.long 0x0 0. "vid_shadow_en,When set to 1 DPI receives the active configuration from the auxiliary registers" "0,1" rgroup.long 0x10C++0x7 line.long 0x0 "DPI_VCID_ACT,Actual DPI Virtual Channel ID" hexmask.long 0x0 2.--31. 1. "reserved_31_2,Reserved and read as zero" newline bitfld.long 0x0 0.--1. "dpi_vcid,This field specifies the DPI virtual channel id that is indexed to the Video mode packets" "0,1,2,3" line.long 0x4 "DPI_COLOR_CODING_ACT,Actual DPI Color Coding" hexmask.long.tbyte 0x4 9.--31. 1. "reserved_31_9,Reserved and read as zero" newline bitfld.long 0x4 8. "loosely18_en,When 1 this bit activates loosely packed variant to 18-bit configurations" "0,1" newline hexmask.long.byte 0x4 4.--7. 1. "reserved_7_4,Reserved and read as zero" newline hexmask.long.byte 0x4 0.--3. 1. "dpi_color_coding,This field configures the DPI color for Video Mode/eDPI Command Mode coding as follows:" rgroup.long 0x118++0x3 line.long 0x0 "DPI_LP_CMD_TIM_ACT,Actual DPI Low Power Commands' Timing" hexmask.long.byte 0x0 24.--31. 1. "reserved_31_24,Reserved and read as zero" newline hexmask.long.byte 0x0 16.--23. 1. "outvact_lpcmd_time,This field is used for the transmission of commands in low-power mode" newline hexmask.long.byte 0x0 8.--15. 1. "reserved_15_8,Reserved and read as zero" newline hexmask.long.byte 0x0 0.--7. 1. "invact_lpcmd_time,This field is used for the transmission of commands in low-power mode" group.long 0x11C++0x3 line.long 0x0 "EDPI_TE_HW_CFG,TE for Hardware operations" hexmask.long.word 0x0 16.--31. 1. "scan_line_parameter,When hw_set_scan_line = 1 this bit configures the parameter that describes the Tearing Effect Output Line mode" newline hexmask.long.word 0x0 5.--15. 1. "reserved_15_5,Reserved and read as zero" newline bitfld.long 0x0 4. "hw_set_scan_line,When hw_tear_effect_on = 1 this bit configures DCS packet type to be issued by MIPI DSI host to the display module:" "0: After tearing effect request set_tear_on is..,1: After tearing effect request set_tear_scan_line.." newline rbitfld.long 0x0 2.--3. "reserved_3_2,Reserved and read as zero" "0,1,2,3" newline bitfld.long 0x0 1. "hw_tear_effect_gen,When hw_tear_effect = 1 this bit changes tear effect by Hardware priorities:" "0: After tearing effect request tear effect..,1: After tearing effect request tear effect.." newline bitfld.long 0x0 0. "hw_tear_effect_on,This bit activates Tearing effect by hardware:" "0: Tearing effect request is triggered by a..,1: Tearing effect request is triggered by the.." rgroup.long 0x138++0x2B line.long 0x0 "VID_MODE_CFG_ACT,VID_MODE_CFG" hexmask.long.tbyte 0x0 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline bitfld.long 0x0 9. "lp_cmd_en,When 1 this bit enables the command transmission only in low-power mode" "0,1" newline bitfld.long 0x0 8. "frame_bta_ack_en,When 1 this bit enables the request for an acknowledge response at the end of a frame" "0,1" newline bitfld.long 0x0 7. "lp_hfp_en,When 1 this bit enables the return to low-power inside the HFP period when timing allows" "0,1" newline bitfld.long 0x0 6. "lp_hbp_en,When 1 this bit enables the return to low-power inside the HBP period when timing allows" "0,1" newline bitfld.long 0x0 5. "lp_vact_en,When 1 this bit enables the return to low-power inside the VACT period when timing allows" "0,1" newline bitfld.long 0x0 4. "lp_vfp_en,When 1 this bit enables the return to low-power inside the VFP period when timing allows" "0,1" newline bitfld.long 0x0 3. "lp_vbp_en,When 1 this bit enables the return to low-power inside the VBP period when timing allows" "0,1" newline bitfld.long 0x0 2. "lp_vsa_en,When 1 this bit enables the return to low-power inside the VSA period when timing allows" "0,1" newline bitfld.long 0x0 0.--1. "vid_mode_type,This field specifies the video mode transmission type as follows:" "0: Non-burst with sync pulses,1: Non-burst with sync events,2: Burst mode,3: Burst mode" line.long 0x4 "VID_PKT_SIZE_ACT,Actual VID_PKT_SIZE" hexmask.long.tbyte 0x4 14.--31. 1. "reserved_31_14,Reserved and read as zero" newline hexmask.long.word 0x4 0.--13. 1. "vid_pkt_size,This field specifies the number of pixels in a single video packet" line.long 0x8 "VID_NUM_CHUNKS_ACT,Actual VID_NUM_CHUNKS" hexmask.long.tbyte 0x8 13.--31. 1. "reserved_31_13,Reserved and read as zero" newline hexmask.long.word 0x8 0.--12. 1. "vid_num_chunks,This register specifies the number of chunks to be transmitted during a Line period (a chunk is pair made of a video packet and a null packet)" line.long 0xC "VID_NULL_SIZE_ACT,Actual VID_NULL_SIZE" hexmask.long.tbyte 0xC 13.--31. 1. "reserved_31_13,Reserved and read as zero" newline hexmask.long.word 0xC 0.--12. 1. "vid_null_size,This register specifies the number of bytes inside a null packet" line.long 0x10 "VID_HSA_TIME_ACT,Actual VID_HSA_TIME" hexmask.long.tbyte 0x10 12.--31. 1. "reserved_31_12,Reserved and read as zero" newline hexmask.long.word 0x10 0.--11. 1. "vid_hsa_time,This field specifies the Horizontal Synchronism Active period in lane byte clock cycles" line.long 0x14 "VID_HBP_TIME_ACT,Actual VID_HBP_TIME" hexmask.long.tbyte 0x14 12.--31. 1. "reserved_31_12,Reserved and read as zero" newline hexmask.long.word 0x14 0.--11. 1. "vid_hbp_time,This field specifies the Horizontal Back Porch period in lane byte clock cycles" line.long 0x18 "VID_HLINE_TIME_ACT,Actual VID_HLINE_TIME" hexmask.long.tbyte 0x18 15.--31. 1. "reserved_31_15,Reserved and read as zero" newline hexmask.long.word 0x18 0.--14. 1. "vid_hline_time,This field specifies the size of the total line time (HSA+HBP+HACT+HFP) counted in lane byte clock cycles" line.long 0x1C "VID_VSA_LINES_ACT,Actual VID_VSA_LINES" hexmask.long.tbyte 0x1C 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline hexmask.long.word 0x1C 0.--9. 1. "vsa_lines,This field specifies the Vertical Synchronism Active period measured in number of horizontal lines" line.long 0x20 "VID_VBP_LINES_ACT,VID_VBP_LINES" hexmask.long.tbyte 0x20 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline hexmask.long.word 0x20 0.--9. 1. "vbp_lines,This field specifies the Vertical Back Porch period measured in number of horizontal lines" line.long 0x24 "VID_VFP_LINES_ACT,Actual VID_VFP_LINES" hexmask.long.tbyte 0x24 10.--31. 1. "reserved_31_10,Reserved and read as zero" newline hexmask.long.word 0x24 0.--9. 1. "vfp_lines,This field specifies the Vertical Front Porch period measured in number of horizontal lines" line.long 0x28 "VID_VACTIVE_LINES_ACT,Actual VID_VACTIVE_LINES" hexmask.long.tbyte 0x28 14.--31. 1. "reserved_31_14,Reserved and read as zero" newline hexmask.long.word 0x28 0.--13. 1. "v_active_lines,This field specifies the Vertical Active period measured in number of horizontal lines" rgroup.long 0x168++0x3 line.long 0x0 "VID_PKT_STATUS,eDPI and DPI FIFOs status" hexmask.long.byte 0x0 24.--31. 1. "reserved_31_24,Reserved and read as zero" newline bitfld.long 0x0 23. "edpi_buff_pld_full,This bit indicates the full status of the edpi payload internal buffer" "0,1" newline bitfld.long 0x0 22. "edpi_buff_pld_empty,This bit indicates the empty status of the edpi payload internal buffer" "0,1" newline bitfld.long 0x0 21. "edpi_buff_cmd_full,This bit indicates the full status of the edpi command internal buffer" "0,1" newline bitfld.long 0x0 20. "edpi_buff_cmd_empty,This bit indicates the empty status of the edpi command internal buffer" "0,1" newline bitfld.long 0x0 18.--19. "reserved_19_18,Reserved and read as zero" "0,1,2,3" newline bitfld.long 0x0 17. "dpi_buff_pld_full,This bit indicates the full status of the payload internal buffer for video Mode" "0,1" newline bitfld.long 0x0 16. "dpi_buff_pld_empty,This bit indicates the empty status of the payload internal buffer for video Mode" "0,1" newline hexmask.long.byte 0x0 8.--15. 1. "reserved_15_8,Reserved and read as zero" newline bitfld.long 0x0 7. "edpi_pld_w_full,This bit indicates the full status of write payload FIFO for command Mode" "0,1" newline bitfld.long 0x0 6. "edpi_pld_w_empty,This bit indicates the empty status of write payload FIFO for command Mode" "0,1" newline bitfld.long 0x0 5. "edpi_cmd_w_full,This bit indicates the full status of write command FIFO for command Mode" "0,1" newline bitfld.long 0x0 4. "edpi_cmd_w_empty,This bit indicates the empty status of write command FIFO for command Mode" "0,1" newline bitfld.long 0x0 3. "dpi_pld_w_full,This bit indicates the full status of write payload FIFO for video Mode" "0,1" newline bitfld.long 0x0 2. "dpi_pld_w_empty,This bit indicates the empty status of write payload FIFO for video Mode" "0,1" newline bitfld.long 0x0 1. "dpi_cmd_w_full,This bit indicates the full status of write command FIFO for video Mode" "0,1" newline bitfld.long 0x0 0. "dpi_cmd_w_empty,This bit indicates the empty status of write command FIFO for video Mode" "0,1" rgroup.long 0x190++0x3 line.long 0x0 "SDF_3D_ACT,SDF_3D" hexmask.long.word 0x0 17.--31. 1. "reserved_31_17,Reserved and read as zero" newline bitfld.long 0x0 16. "send_3d_cfg,When set causes the next VSS packet to include 3D control payload in every VSS packet" "0,1" newline hexmask.long.word 0x0 6.--15. 1. "reserved_15_6,Reserved and read as zero" newline bitfld.long 0x0 5. "right_first,This bit specifies the left/right order:" "0: left eye is sent first then right eye,1: right eye data is sent first then left eye" newline bitfld.long 0x0 4. "second_vsync,This field specifies whether there is a second VSYNC pulse between Left and Right Images when 3D Image Format is Frame-based:" "0: No sync pulses between left and right data,1: Sync pulse (HSYNC VSYNC blanking) between left.." newline bitfld.long 0x0 2.--3. "format_3d,This field specifies 3D Image Format:" "0: Alternating lines of left and right data,1: Alternating frames of left and right data,2: Alternating pixels of left and right data,?" newline bitfld.long 0x0 0.--1. "mode_3d,This field specifies 3D Mode On/Off and Display Orientation:" "0: 3D Mode Off 2D Mode On,1: 3D Mode On Portrait Orientation,2: 3D Mode On Landscape Orientation,?" tree.end tree "CAMERA_DSI_CAMID_CSR" base ad:0x4ADE0000 group.long 0x0++0x3 line.long 0x0 "ISP_CAMID,ISP CAMID" bitfld.long 0x0 12.--14. "ARUSER1,AXI USER setting - READ bus 1" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "ARUSER0,AXI USER setting - READ bus 0" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4.--6. "AWUSER1,AXI USER setting - WRITE bus 1" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "AWUSER0,AXI USER setting - WRITE bus 0" "0,1,2,3,4,5,6,7" tree.end tree "CAMERA_DSI_MASTER_CSR" base ad:0x4AD10000 group.long 0x0++0xB line.long 0x0 "DSI_Clock_gating_control,DSI Clock Gating Control" bitfld.long 0x0 4. "Dphy_pll_clkext,Controls the clock gating of the DPHY PLL clkext" "0: clkext is enabled,1: clkext is disabled (gated)" newline bitfld.long 0x0 3. "Dphy_pll_clkout,Controls the clock gating of the DPHY PLL clkout" "0: clkout is enabled,1: clkout is disabled (gated)" newline bitfld.long 0x0 2. "Dphy_pll_clkin,Controls the clock gating of the DPHY PLL clkin" "0: clkin is enabled,1: clkin is disabled (gated)" newline bitfld.long 0x0 1. "Display_1_async_fifo,Controls the gating of the processing clock (pixel clock) of Display_1_async_FIFO (Pixel link slave)" "0: Pixel clock is enabled,1: Pixel clock is disabled (gated)" newline bitfld.long 0x0 0. "Display_0_async_fifo,Controls the gating of the processing clock (pixel clock) of Display_0_async_FIFO (Pixel link slave)" "0: Pixel clock is enabled,1: Pixel clock is disabled (gated)" line.long 0x4 "DSI_PIXEL_LINK_CONTROL,DSI Pixel Link Control" bitfld.long 0x4 0. "Pixel_link_sel,Selects the pixel link connected to the DSI host controller" "0: Pixel Link 0,1: Pixel Link 1" line.long 0x8 "DSI_Clock_setting,DSI Clock Setting" bitfld.long 0x8 17. "PL_slv_dsi1_ingress_clk_sel,Selects the ingress clock of the PL slave DSI1 (from Pixel Link 1)" "0: ingress_clk = egress_clk,1: ingress_clk = divided DSI PLL output" newline bitfld.long 0x8 16. "PL_slv_dsi0_ingress_clk_sel,Selects the ingress clock of the PL slave DSI0 (from Pixel Link 0)" "0: ingress_clk = egress_clk,1: ingress_clk = divided DSI PLL output" newline hexmask.long.byte 0x8 8.--11. 1. "Dphy_pll_div,Defines the division factor of the DPHY_PLL clkout when used as display engine clock source" newline bitfld.long 0x8 7. "Dphy_ref_clock_source,Select the DPHY PLL clock source" "0: 24 MHz,1: Pixel link clock divided by 'Dphy_ref_clock_div'" newline bitfld.long 0x8 6. "Dphy_bypass_clock,Select the DPHY PLL clkext (PLL bypass clock)" "0: clkext is CCM.DPHY_PLL_BYPASS_CLOCK,1: clkext is pixel link clock divided by.." newline hexmask.long.byte 0x8 0.--3. 1. "Dphy_ref_clock_div,Defines the division factor of the Pixel link clock (when used as PLL clock source)" tree.end tree "CAMERA_DSI_OR_CSI_PHY_CSR" base ad:0x4AD20000 group.long 0x0++0xB line.long 0x0 "STANDALONE_PHY_MODE_CONTROL,Rx DPHY mode control" hexmask.long.byte 0x0 4.--7. 1. "PHY_ENABLE_EXT,PHY lane enable for individual lane control" line.long 0x4 "STANDALONE_PHY_FREQ_CONTROL,Rx DPHY frequency control" hexmask.long.byte 0x4 16.--22. 1. "Phy_hsfreqrange,High-speed frequency range selection" newline hexmask.long.byte 0x4 0.--5. 1. "Phy_cfgclkfreqrange,System clock frequency configuration preset." line.long 0x8 "STANDALONE_PHY_TEST_MODE_CONTROL,Rx DPHY test mode control" bitfld.long 0x8 15. "turnrequest_0,Turn around request." "0,1" newline bitfld.long 0x8 14. "phy_enable_byp,Mux select between controllers (CSI/DSI) generated PHY enable signal and external phy_enable_ext." "0,1" newline bitfld.long 0x8 13. "turndisable_0,Disable Turn Around for Lane 0" "0: Allow turn around,1: Disable turn around" newline bitfld.long 0x8 12. "enableclk_ext,Expose enable signal for Clock Lane" "0,1" newline bitfld.long 0x8 11. "forcerxmode_3,Force lane module into receive mode/wait for Stop State for lane 3" "0,1" newline bitfld.long 0x8 10. "forcerxmode_2,Force lane module into receive mode/wait for Stop State for lane 2" "0,1" newline bitfld.long 0x8 9. "forcerxmode_1,Force lane module into receive mode/wait for Stop State for lane 1" "0,1" newline bitfld.long 0x8 8. "forcerxmode_0,Force lane module into receive mode/wait for Stop State for lane 0" "0,1" newline bitfld.long 0x8 4. "forcetxstopmode_0,Force lane module into transmit mode and generate Stop state for lane 0" "0,1" newline bitfld.long 0x8 0. "basedir_0,Base direction for lane 0" "0: Configure lane as TX,1: Configure lane as RX" rgroup.long 0xC++0x3 line.long 0x0 "STANDALONE_PHY_TEST_MODE_STATUS,Rx DPHY test mode status" bitfld.long 0x0 9. "ulpsactivenotclk,Indicates that the clock lane is in the ULP state" "0: Clock lane is in ULP state,1: Clock lane is not in ULP state" newline bitfld.long 0x0 8. "direction_0,Indicates the current direction of lane 0" "0: The lane is in transmit mode,1: The lane is in receive mode" newline bitfld.long 0x0 7. "errcontrol_3,Indicates control error for lane 3" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 6. "errcontrol_2,Indicates control error for lane 2" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 5. "errcontrol_1,Indicates control error for lane 1" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 4. "errcontrol_0,Indicates control error for lane 0" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 3. "ulpsactivenot_3,Indicates lane 3 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" newline bitfld.long 0x0 2. "ulpsactivenot_2,Indicates lane 2 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" newline bitfld.long 0x0 1. "ulpsactivenot_1,Indicates lane 1 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" newline bitfld.long 0x0 0. "ulpsactivenot_0,Indicates lane 0 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" group.long 0x10++0x3 line.long 0x0 "STANDALONE_PHY_TEST_IO_CONT,Rx DPHY test IO continuity" hexmask.long.word 0x0 16.--26. 1. "Phy_cont_data,Continuity data signals" newline bitfld.long 0x0 0. "Phy_Cont_en,IO continuity test mode enable" "0: Disable IO continuity test mode,1: Enable IO continuity test mode" group.long 0x100++0xB line.long 0x0 "COMBO_PHY_MODE_CONTROL,Rx/Tx DPHY mode control" hexmask.long.byte 0x0 4.--7. 1. "PHY_enable_ext,PHY lane enable for individual lane control." newline bitfld.long 0x0 3. "PLL_gp_clk_en,Enable signal for clkout_gp clock." "0: Disable gp_clk_en,1: Enable" newline bitfld.long 0x0 1.--2. "PLL_clksel,Control of PLL clock output selection" "0: Clocks stopped,1: Clock generation,2: Buffered clkext,?" newline bitfld.long 0x0 0. "Tx_Rxz,PHY configuration" "0: CSI mode,1: DSI mode" line.long 0x4 "COMBO_PHY_FREQ_CONTROL,Rx/Tx DPHY frequency control" hexmask.long.byte 0x4 16.--22. 1. "Phy_hsfreqrange,High-speed frequency range selection" newline hexmask.long.byte 0x4 0.--7. 1. "Phy_cfgclkfreqrange,System clock frequency configuration preset" line.long 0x8 "COMBO_PHY_TEST_MODE_CONTROL,Rx/Tx DPHY test mode control" bitfld.long 0x8 21. "biston,Starts the HS bist test." "0,1" newline bitfld.long 0x8 20. "txclkesc_sel,Mux select between controller generated and external escape mode transmit clock" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 19. "txlp_data_esc_sel,Mux select between controller generated and external escape mode transmit data signals" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 18. "txulpsclk_sel,Mux select between controller generated and external transmit ULP signals" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 17. "txbyteclkhs_sel,Mux select between controller generated and external high-speed transmit clock" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 16. "txdatahs_sel,Mux select between controller generated and external high-speed data lanes" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 15. "turnrequest_0_sel,Mux select between controller generated and external turn around request signal" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 14. "phy_enable_byp,Mux select between CSI/DSI controllers generated PHY enable signals and external phy_enable_ext" "0: Controller generated signals,1: External signals" newline bitfld.long 0x8 13. "turndisable_0,Disable turn around for lane 0" "0: Allow turn around,1: Disable turn around" newline bitfld.long 0x8 12. "enableclk_ext,Enable clock lane" "0: Disable clock lane,1: Enable clock lane" newline bitfld.long 0x8 11. "forcerxmode_3,Force lane module into receive mode/wait for Stop State for lane 3" "0: Do not force lane module into receive mode and..,1: Force lane module into receive mode and wait for.." newline bitfld.long 0x8 10. "forcerxmode_2,Force lane module into receive mode/wait for Stop State for lane 2" "0: Do not force lane module into receive mode and..,1: Force lane module into receive mode and wait for.." newline bitfld.long 0x8 9. "forcerxmode_1,Force lane module into receive mode/wait for Stop State for lane 1" "0: Do not force lane module into receive mode and..,1: Force lane module into receive mode and wait for.." newline bitfld.long 0x8 8. "forcerxmode_0,Force lane module into receive mode/wait for Stop State for lane 0" "0: Do not force lane module into receive mode and..,1: Force lane module into receive mode and wait for.." newline bitfld.long 0x8 7. "forcetxstopmode_3,Force lane module into transmit mode and generate Stop state for lane 3" "0: Do not force lane module into transmit mode and..,1: Force lane module into transmit mode and Stop.." newline bitfld.long 0x8 6. "forcetxstopmode_2,Force lane module into transmit mode and generate Stop state for lane 2" "0: Do not force lane module into transmit mode and..,1: Force lane module into transmit mode and Stop.." newline bitfld.long 0x8 5. "forcetxstopmode_1,Force lane module into transmit mode and generate Stop state for lane 1" "0: Do not force lane module into transmit mode and..,1: Force lane module into transmit mode and Stop.." newline bitfld.long 0x8 4. "forcetxstopmode_0,Force lane module into transmit mode and generate Stop state for lane 0" "0: Do not force lane module into transmit mode and..,1: Force lane module into transmit mode and Stop.." newline bitfld.long 0x8 3. "basedir_3,Base direction for lane 3" "0: Configure lane as TX,1: Configure lane as RX" newline bitfld.long 0x8 2. "basedir_2,Base direction for lane 2" "0: Configure lane as TX,1: Configure lane as RX" newline bitfld.long 0x8 1. "basedir_1,Base direction for lane 1" "0: Configure lane as TX,1: Configure lane as RX" newline bitfld.long 0x8 0. "basedir_0,Base direction for lane 0" "0: Configure lane as TX,1: Configure lane as RX" rgroup.long 0x10C++0x3 line.long 0x0 "COMBO_PHY_TEST_MODE_STATUS,Rx/Tx DPHY test mode status" bitfld.long 0x0 13. "bistok,HS bist test OK indication" "0: If bistdone 1 BIST test is OK,1: If bistdone 1 BIST test completed with errors" newline bitfld.long 0x0 12. "bistdone,HS bist test done." "0: HS bist test not done.,1: HS bist test done." newline bitfld.long 0x0 11. "phy_lock,PLL lock indication" "0: PLL is not locked,1: PLL is locked" newline bitfld.long 0x0 9. "ulpsactivenotclk,Indicates that the clock lane is in the ULP state" "0: Clock lane is in ULP state,1: Clock lane is not in ULP state" newline bitfld.long 0x0 8. "rxulpsclknot,Indicates that the clock lane module has entered the ULP state" "0: Clock lane is in ULP state,1: Clock lane is not in ULP state" newline bitfld.long 0x0 7. "errcontrol_3,Indicates control error for lane 3" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 6. "errcontrol_2,Indicates control error for lane 2" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 5. "errcontrol_1,Indicates control error for lane 1" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 4. "errcontrol_0,Indicates control error for lane 0" "0: No control error detected,1: Control error detected" newline bitfld.long 0x0 3. "ulpsactivenot_3,Indicates lane 3 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" newline bitfld.long 0x0 2. "ulpsactivenot_2,Indicates lane 2 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" newline bitfld.long 0x0 1. "ulpsactivenot_1,Indicates lane 1 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" newline bitfld.long 0x0 0. "ulpsactivenot_0,Indicates lane 0 is in the Ultra Low Power (ULP) state" "0: Lane is in ULP state,1: Lane is not in ULP state" group.long 0x110++0x3 line.long 0x0 "COMBO_PHY_TEST_IO_CONT,Rx/Tx DPHY test IO continuity" hexmask.long.word 0x0 16.--26. 1. "Phy_cont_data,Continuity data signals" newline bitfld.long 0x0 0. "Phy_Cont_en,IO continuity test mode enable" "0: Disable IO continuity test mode,1: Enable IO continuity test mode" tree.end tree "CAMERA_DSI_PIXEL_FORMATTING" base ad:0x4AC00000 group.long 0x0++0xB line.long 0x0 "DSI_HOST_CONFIGURATION,DSI Host Configuration" bitfld.long 0x0 0.--2. "PIXEL_LINK_FORMAT,Defines the pixel format transported on the pixel link" "0: RGB 24-bit,1: RGB 20-bit,2: RGB 18-bit,3: RGB 16-bit,4: 20-bit YCbCr 4:2:2 format,5: 16-bit YCbCr 4:2:2 format,?,?" line.long 0x4 "DSI_PARITY_ERROR_STATUS,DSI Parity Error Status" eventfld.long 0x4 1. "PARITY123_ERROR,Detected parity[3:1] error has reached the PARITY123_ERROR_MAX" "0: Number of detected error on parity[3:1] is below..,1: Number of detected error on parity[3:1] is above.." newline eventfld.long 0x4 0. "PARITY0_ERROR,Detected parity[0] error has reached the PARITY0_ERROR_MAX" "0: Number of detected error on parity[0] is below..,1: Number of detected error on parity[0] is above.." line.long 0x8 "DSI_PARITY_ERR_THRESH,DSI Parity Error Threshold" hexmask.long.word 0x8 16.--25. 1. "PARITY123_ERR_MAX,Parity123_error max threshold" newline hexmask.long.word 0x8 0.--9. 1. "PARITY0_ERR_MAX,Parity0_error max threshold" tree.end tree "CAMERA_DSI_STREAM_CSR" base ad:0x4AD00000 group.long 0x0++0xB line.long 0x0 "DSI_Host_Configuration,DSI Host Configuration" bitfld.long 0x0 5. "colormode,That bit is directly connected to the dpicolorm input of the CSI2 host controller. It's used to switch between normal color and reduced color mode." "0: '1' to '0': Send a Color Mode Off Command (Short..,1: '0' to '1': Send a Color Mode On Command (Short.." newline bitfld.long 0x0 4. "shutdown,That bit is directly connected to the dpishutdn input of the CSI2 host controller. It's used to shutdown the distant DSI peripheral." "0: '1' to '0': send a turn on peripheral command..,1: '0' to '1': send a shut down peripheral command.." newline bitfld.long 0x0 0.--2. "Pixel_link_format,Configures the pixel link format transported on the pixel link" "0: RGB 24-bit,1: RGB 30-bit,2: RGB 18-bit,3: RGB 16-bit,4: 20-bit YCbCr 4:2:2 format,5: 16-bit YCbCr 4:2:2 format,?,?" line.long 0x4 "DSI_Parity_error_status,DSI Parity Error Status" eventfld.long 0x4 1. "Parity123_error,Parity 123 error status" "0: The number of detected errors on parity 123 is..,1: The number of detected errors on parity 123 has.." newline eventfld.long 0x4 0. "Parity0_error,Parity 0 error status" "0: The number of detected errors on parity 0 is..,1: The number of detected errors on parity 0 is.." line.long 0x8 "DSI_Parity_error_threshold,DSI Parity Error Threshold" hexmask.long.word 0x8 16.--25. 1. "parity123_error_max,Max parity 123 threshold" newline hexmask.long.word 0x8 0.--9. 1. "parity0_error_max,Max parity 0 threshold" tree.end tree "CAMERA_EDMA5_MP" base ad:0x4AE10000 group.long 0x0++0x3 line.long 0x0 "MP_CSR,Management Page Control Register" rbitfld.long 0x0 31. "ACTIVE,DMA Active Status" "0: eDMA is idle.,1: eDMA is executing a channel." hexmask.long.byte 0x0 24.--28. 1. "ACTIVE_ID,Active channel ID" newline hexmask.long.byte 0x0 16.--23. 1. "VER,eDMA version" bitfld.long 0x0 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication is disabled for all..,1: Master ID replication is available and is.." newline bitfld.long 0x0 6. "GCLC,Global Channel Linking Control" "0: Channel linking is disabled for all channels.,1: Channel linking is available and controlled by.." bitfld.long 0x0 5. "HALT,Halt DMA Operations" "0: Normal operation,1: Stall the start of any new channels. Executing.." newline bitfld.long 0x0 4. "HAE,Halt After Error" "0: Normal operation,1: Any error causes the HALT bit to set." bitfld.long 0x0 3. "GCPC,Global Channel Preemption Control" "0: Preemption is disabled for all channels.,1: Preemption is available." newline bitfld.long 0x0 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round robin channel arbitration is disabled.,1: Round robin channel arbitration is enabled." bitfld.long 0x0 1. "EDBG,Enable Debug" "0: Debug mode is disabled.,1: Debug mode is enabled." rgroup.long 0x4++0x7 line.long 0x0 "MP_ES,Management Page Error Status Register" bitfld.long 0x0 31. "VLD,Valid" "0: No ERR bits are set.,1: At least one ERR bit is set indicating a valid.." hexmask.long.byte 0x0 24.--28. 1. "ERRCHN,Error Channel Number or Canceled Channel Number" newline bitfld.long 0x0 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." bitfld.long 0x0 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." newline bitfld.long 0x0 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." bitfld.long 0x0 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." bitfld.long 0x0 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to zero.." bitfld.long 0x0 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." bitfld.long 0x0 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x4 "MP_INT_LOW,Management Page Interrupt Request Status Register" hexmask.long 0x4 0.--31. 1. "INT,Interrupt Request Status" rgroup.long 0x10++0x3 line.long 0x0 "MP_HRS_LOW,Hardware Request Status Register" hexmask.long 0x0 0.--31. 1. "HRS,Hardware Request Status" group.long 0x20++0x3 line.long 0x0 "MP_STOPCH,Stop Channel Register" bitfld.long 0x0 7. "ERR,Stop channel with error exit" "0: Stop channel without error reporting,1: Stop channel with error reporting" hexmask.long.byte 0x0 0.--4. 1. "STOPCH,Stop Channel" rgroup.long 0x30++0x3 line.long 0x0 "MP_SSR_LOW,Stop Status Register" hexmask.long 0x0 0.--31. 1. "CSS,Channel Stop Status" group.long 0x40++0x3 line.long 0x0 "MP_VPAS_LOW,Virtual/Physical Address Select Register" hexmask.long 0x0 0.--31. 1. "EVA,Enable Virtual Addressing" repeat 32. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CH_GRPRI[$1],Channel Arbitration Group Register" hexmask.long.byte 0x0 0.--5. 1. "GRPRI,Arbitration group per channel." repeat.end repeat 32. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x400)++0x3 line.long 0x0 "CH_PROT[$1],Channel Protection Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--4. 1. "MID,Master ID" repeat.end tree.end tree "CAMERA_EDMA5_TCD" base ad:0x4AE20000 group.long 0x0++0x13 line.long 0x0 "CH0_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH0_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH0_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH0_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH0_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x18++0x3 line.long 0x0 "CH0_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x20++0x7 line.long 0x0 "TCD0_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD0_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x28++0x3 line.word 0x0 "TCD0_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD0_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2C++0x3 line.long 0x0 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2C++0x1B line.long 0x0 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD0_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD0_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD0_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD0_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x48++0x3 line.word 0x0 "TCD0_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4A++0x5 line.word 0x0 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD0_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4E++0x1 line.word 0x0 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x10000++0x13 line.long 0x0 "CH1_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH1_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH1_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH1_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH1_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10018++0x3 line.long 0x0 "CH1_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x10020++0x7 line.long 0x0 "TCD1_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD1_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x10028++0x3 line.word 0x0 "TCD1_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD1_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1002C++0x3 line.long 0x0 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1002C++0x1B line.long 0x0 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD1_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD1_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD1_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD1_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x10048++0x3 line.word 0x0 "TCD1_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1004A++0x5 line.word 0x0 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD1_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1004E++0x1 line.word 0x0 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x20000++0x13 line.long 0x0 "CH2_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH2_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH2_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH2_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH2_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20018++0x3 line.long 0x0 "CH2_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x20020++0x7 line.long 0x0 "TCD2_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD2_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x20028++0x3 line.word 0x0 "TCD2_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD2_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2002C++0x3 line.long 0x0 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2002C++0x1B line.long 0x0 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD2_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD2_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD2_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD2_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x20048++0x3 line.word 0x0 "TCD2_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x2004A++0x5 line.word 0x0 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD2_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2004E++0x1 line.word 0x0 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x30000++0x13 line.long 0x0 "CH3_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH3_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH3_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH3_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH3_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x30018++0x3 line.long 0x0 "CH3_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x30020++0x7 line.long 0x0 "TCD3_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD3_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x30028++0x3 line.word 0x0 "TCD3_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD3_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x3002C++0x3 line.long 0x0 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x3002C++0x1B line.long 0x0 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD3_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD3_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD3_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD3_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x30048++0x3 line.word 0x0 "TCD3_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x3004A++0x5 line.word 0x0 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD3_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3004E++0x1 line.word 0x0 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x40000++0x13 line.long 0x0 "CH4_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH4_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH4_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH4_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH4_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x40018++0x3 line.long 0x0 "CH4_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x40020++0x7 line.long 0x0 "TCD4_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD4_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x40028++0x3 line.word 0x0 "TCD4_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD4_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x4002C++0x3 line.long 0x0 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x4002C++0x1B line.long 0x0 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD4_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD4_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD4_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD4_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x40048++0x3 line.word 0x0 "TCD4_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4004A++0x5 line.word 0x0 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD4_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4004E++0x1 line.word 0x0 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x50000++0x13 line.long 0x0 "CH5_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH5_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH5_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH5_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH5_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x50018++0x3 line.long 0x0 "CH5_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x50020++0x7 line.long 0x0 "TCD5_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD5_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x50028++0x3 line.word 0x0 "TCD5_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD5_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x5002C++0x3 line.long 0x0 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x5002C++0x1B line.long 0x0 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD5_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD5_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD5_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD5_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x50048++0x3 line.word 0x0 "TCD5_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x5004A++0x5 line.word 0x0 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD5_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5004E++0x1 line.word 0x0 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x60000++0x13 line.long 0x0 "CH6_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH6_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH6_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH6_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH6_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x60018++0x3 line.long 0x0 "CH6_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x60020++0x7 line.long 0x0 "TCD6_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD6_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x60028++0x3 line.word 0x0 "TCD6_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD6_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x6002C++0x3 line.long 0x0 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x6002C++0x1B line.long 0x0 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD6_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD6_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD6_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD6_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x60048++0x3 line.word 0x0 "TCD6_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x6004A++0x5 line.word 0x0 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD6_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6004E++0x1 line.word 0x0 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x70000++0x13 line.long 0x0 "CH7_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH7_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH7_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH7_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH7_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x70018++0x3 line.long 0x0 "CH7_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x70020++0x7 line.long 0x0 "TCD7_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD7_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x70028++0x3 line.word 0x0 "TCD7_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD7_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x7002C++0x3 line.long 0x0 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x7002C++0x1B line.long 0x0 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD7_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD7_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD7_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD7_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x70048++0x3 line.word 0x0 "TCD7_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x7004A++0x5 line.word 0x0 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD7_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7004E++0x1 line.word 0x0 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x80000++0x13 line.long 0x0 "CH8_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH8_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH8_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH8_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH8_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x80018++0x3 line.long 0x0 "CH8_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x80020++0x7 line.long 0x0 "TCD8_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD8_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x80028++0x3 line.word 0x0 "TCD8_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD8_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x8002C++0x3 line.long 0x0 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x8002C++0x1B line.long 0x0 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD8_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD8_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD8_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD8_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x80048++0x3 line.word 0x0 "TCD8_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x8004A++0x5 line.word 0x0 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD8_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8004E++0x1 line.word 0x0 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x90000++0x13 line.long 0x0 "CH9_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH9_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH9_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH9_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH9_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x90018++0x3 line.long 0x0 "CH9_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x90020++0x7 line.long 0x0 "TCD9_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD9_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x90028++0x3 line.word 0x0 "TCD9_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD9_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x9002C++0x3 line.long 0x0 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x9002C++0x1B line.long 0x0 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD9_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD9_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD9_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD9_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x90048++0x3 line.word 0x0 "TCD9_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x9004A++0x5 line.word 0x0 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD9_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9004E++0x1 line.word 0x0 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xA0000++0x13 line.long 0x0 "CH10_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH10_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH10_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH10_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH10_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA0018++0x3 line.long 0x0 "CH10_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xA0020++0x7 line.long 0x0 "TCD10_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD10_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0xA0028++0x3 line.word 0x0 "TCD10_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD10_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xA002C++0x3 line.long 0x0 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xA002C++0x1B line.long 0x0 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD10_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD10_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD10_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD10_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xA0048++0x3 line.word 0x0 "TCD10_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA004A++0x5 line.word 0x0 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD10_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA004E++0x1 line.word 0x0 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xB0000++0x13 line.long 0x0 "CH11_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH11_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH11_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH11_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH11_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB0018++0x3 line.long 0x0 "CH11_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xB0020++0x7 line.long 0x0 "TCD11_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD11_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0xB0028++0x3 line.word 0x0 "TCD11_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD11_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xB002C++0x3 line.long 0x0 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xB002C++0x1B line.long 0x0 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD11_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD11_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD11_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD11_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xB0048++0x3 line.word 0x0 "TCD11_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB004A++0x5 line.word 0x0 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD11_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB004E++0x1 line.word 0x0 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xC0000++0x13 line.long 0x0 "CH12_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH12_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH12_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH12_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH12_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC0018++0x3 line.long 0x0 "CH12_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xC0020++0x7 line.long 0x0 "TCD12_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD12_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0xC0028++0x3 line.word 0x0 "TCD12_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD12_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xC002C++0x3 line.long 0x0 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xC002C++0x1B line.long 0x0 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD12_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD12_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD12_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD12_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xC0048++0x3 line.word 0x0 "TCD12_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC004A++0x5 line.word 0x0 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD12_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC004E++0x1 line.word 0x0 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xD0000++0x13 line.long 0x0 "CH13_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH13_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH13_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH13_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH13_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD0018++0x3 line.long 0x0 "CH13_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xD0020++0x7 line.long 0x0 "TCD13_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD13_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0xD0028++0x3 line.word 0x0 "TCD13_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD13_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xD002C++0x3 line.long 0x0 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xD002C++0x1B line.long 0x0 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD13_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD13_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD13_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD13_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xD0048++0x3 line.word 0x0 "TCD13_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD004A++0x5 line.word 0x0 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD13_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD004E++0x1 line.word 0x0 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xE0000++0x13 line.long 0x0 "CH14_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH14_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH14_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH14_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH14_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE0018++0x3 line.long 0x0 "CH14_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xE0020++0x7 line.long 0x0 "TCD14_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD14_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0xE0028++0x3 line.word 0x0 "TCD14_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD14_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xE002C++0x3 line.long 0x0 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xE002C++0x1B line.long 0x0 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD14_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD14_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD14_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD14_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xE0048++0x3 line.word 0x0 "TCD14_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE004A++0x5 line.word 0x0 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD14_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE004E++0x1 line.word 0x0 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xF0000++0x13 line.long 0x0 "CH15_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH15_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH15_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH15_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH15_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF0018++0x3 line.long 0x0 "CH15_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xF0020++0x7 line.long 0x0 "TCD15_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD15_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0xF0028++0x3 line.word 0x0 "TCD15_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD15_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xF002C++0x3 line.long 0x0 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xF002C++0x1B line.long 0x0 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD15_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD15_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD15_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD15_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xF0048++0x3 line.word 0x0 "TCD15_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF004A++0x5 line.word 0x0 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD15_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF004E++0x1 line.word 0x0 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x100000++0x13 line.long 0x0 "CH16_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH16_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH16_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH16_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH16_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x100018++0x3 line.long 0x0 "CH16_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x100020++0x7 line.long 0x0 "TCD16_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD16_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x100028++0x3 line.word 0x0 "TCD16_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD16_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x10002C++0x3 line.long 0x0 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x10002C++0x1B line.long 0x0 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD16_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD16_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD16_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD16_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x100048++0x3 line.word 0x0 "TCD16_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10004A++0x5 line.word 0x0 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD16_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10004E++0x1 line.word 0x0 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x110000++0x13 line.long 0x0 "CH17_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH17_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH17_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH17_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH17_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x110018++0x3 line.long 0x0 "CH17_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x110020++0x7 line.long 0x0 "TCD17_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD17_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x110028++0x3 line.word 0x0 "TCD17_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD17_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x11002C++0x3 line.long 0x0 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x11002C++0x1B line.long 0x0 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD17_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD17_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD17_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD17_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x110048++0x3 line.word 0x0 "TCD17_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x11004A++0x5 line.word 0x0 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD17_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11004E++0x1 line.word 0x0 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x120000++0x13 line.long 0x0 "CH18_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH18_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH18_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH18_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH18_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x120018++0x3 line.long 0x0 "CH18_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x120020++0x7 line.long 0x0 "TCD18_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD18_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x120028++0x3 line.word 0x0 "TCD18_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD18_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x12002C++0x3 line.long 0x0 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x12002C++0x1B line.long 0x0 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD18_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD18_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD18_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD18_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x120048++0x3 line.word 0x0 "TCD18_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x12004A++0x5 line.word 0x0 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD18_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12004E++0x1 line.word 0x0 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x130000++0x13 line.long 0x0 "CH19_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH19_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH19_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH19_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH19_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x130018++0x3 line.long 0x0 "CH19_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x130020++0x7 line.long 0x0 "TCD19_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD19_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x130028++0x3 line.word 0x0 "TCD19_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD19_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x13002C++0x3 line.long 0x0 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x13002C++0x1B line.long 0x0 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD19_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD19_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD19_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD19_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x130048++0x3 line.word 0x0 "TCD19_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x13004A++0x5 line.word 0x0 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD19_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13004E++0x1 line.word 0x0 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x140000++0x13 line.long 0x0 "CH20_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH20_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH20_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH20_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH20_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x140018++0x3 line.long 0x0 "CH20_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x140020++0x7 line.long 0x0 "TCD20_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD20_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x140028++0x3 line.word 0x0 "TCD20_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD20_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x14002C++0x3 line.long 0x0 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x14002C++0x1B line.long 0x0 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD20_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD20_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD20_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD20_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x140048++0x3 line.word 0x0 "TCD20_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x14004A++0x5 line.word 0x0 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD20_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14004E++0x1 line.word 0x0 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x150000++0x13 line.long 0x0 "CH21_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH21_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH21_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH21_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH21_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x150018++0x3 line.long 0x0 "CH21_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x150020++0x7 line.long 0x0 "TCD21_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD21_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x150028++0x3 line.word 0x0 "TCD21_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD21_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x15002C++0x3 line.long 0x0 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x15002C++0x1B line.long 0x0 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD21_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD21_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD21_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD21_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x150048++0x3 line.word 0x0 "TCD21_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x15004A++0x5 line.word 0x0 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD21_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15004E++0x1 line.word 0x0 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x160000++0x13 line.long 0x0 "CH22_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH22_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH22_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH22_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH22_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x160018++0x3 line.long 0x0 "CH22_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x160020++0x7 line.long 0x0 "TCD22_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD22_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x160028++0x3 line.word 0x0 "TCD22_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD22_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x16002C++0x3 line.long 0x0 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x16002C++0x1B line.long 0x0 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD22_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD22_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD22_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD22_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x160048++0x3 line.word 0x0 "TCD22_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x16004A++0x5 line.word 0x0 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD22_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16004E++0x1 line.word 0x0 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x170000++0x13 line.long 0x0 "CH23_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH23_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH23_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH23_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH23_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x170018++0x3 line.long 0x0 "CH23_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x170020++0x7 line.long 0x0 "TCD23_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD23_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x170028++0x3 line.word 0x0 "TCD23_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD23_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x17002C++0x3 line.long 0x0 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x17002C++0x1B line.long 0x0 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD23_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD23_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD23_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD23_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x170048++0x3 line.word 0x0 "TCD23_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x17004A++0x5 line.word 0x0 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD23_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17004E++0x1 line.word 0x0 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x180000++0x13 line.long 0x0 "CH24_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH24_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH24_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH24_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH24_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x180018++0x3 line.long 0x0 "CH24_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x180020++0x7 line.long 0x0 "TCD24_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD24_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x180028++0x3 line.word 0x0 "TCD24_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD24_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x18002C++0x3 line.long 0x0 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x18002C++0x1B line.long 0x0 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD24_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD24_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD24_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD24_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x180048++0x3 line.word 0x0 "TCD24_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x18004A++0x5 line.word 0x0 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD24_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18004E++0x1 line.word 0x0 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x190000++0x13 line.long 0x0 "CH25_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH25_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH25_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH25_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH25_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x190018++0x3 line.long 0x0 "CH25_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x190020++0x7 line.long 0x0 "TCD25_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD25_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x190028++0x3 line.word 0x0 "TCD25_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD25_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x19002C++0x3 line.long 0x0 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x19002C++0x1B line.long 0x0 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD25_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD25_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD25_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD25_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x190048++0x3 line.word 0x0 "TCD25_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x19004A++0x5 line.word 0x0 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD25_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19004E++0x1 line.word 0x0 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1A0000++0x13 line.long 0x0 "CH26_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH26_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH26_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH26_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH26_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A0018++0x3 line.long 0x0 "CH26_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1A0020++0x7 line.long 0x0 "TCD26_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD26_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x1A0028++0x3 line.word 0x0 "TCD26_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD26_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1A002C++0x3 line.long 0x0 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1A002C++0x1B line.long 0x0 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD26_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD26_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD26_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD26_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1A0048++0x3 line.word 0x0 "TCD26_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A004A++0x5 line.word 0x0 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD26_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A004E++0x1 line.word 0x0 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1B0000++0x13 line.long 0x0 "CH27_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH27_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH27_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH27_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH27_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B0018++0x3 line.long 0x0 "CH27_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1B0020++0x7 line.long 0x0 "TCD27_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD27_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x1B0028++0x3 line.word 0x0 "TCD27_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD27_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1B002C++0x3 line.long 0x0 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1B002C++0x1B line.long 0x0 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD27_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD27_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD27_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD27_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1B0048++0x3 line.word 0x0 "TCD27_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B004A++0x5 line.word 0x0 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD27_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B004E++0x1 line.word 0x0 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1C0000++0x13 line.long 0x0 "CH28_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH28_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH28_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH28_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH28_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C0018++0x3 line.long 0x0 "CH28_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1C0020++0x7 line.long 0x0 "TCD28_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD28_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x1C0028++0x3 line.word 0x0 "TCD28_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD28_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1C002C++0x3 line.long 0x0 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1C002C++0x1B line.long 0x0 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD28_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD28_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD28_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD28_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1C0048++0x3 line.word 0x0 "TCD28_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C004A++0x5 line.word 0x0 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD28_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C004E++0x1 line.word 0x0 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1D0000++0x13 line.long 0x0 "CH29_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH29_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH29_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH29_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH29_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D0018++0x3 line.long 0x0 "CH29_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1D0020++0x7 line.long 0x0 "TCD29_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD29_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x1D0028++0x3 line.word 0x0 "TCD29_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD29_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1D002C++0x3 line.long 0x0 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1D002C++0x1B line.long 0x0 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD29_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD29_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD29_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD29_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1D0048++0x3 line.word 0x0 "TCD29_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D004A++0x5 line.word 0x0 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD29_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D004E++0x1 line.word 0x0 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1E0000++0x13 line.long 0x0 "CH30_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH30_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH30_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH30_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH30_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E0018++0x3 line.long 0x0 "CH30_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1E0020++0x7 line.long 0x0 "TCD30_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD30_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x1E0028++0x3 line.word 0x0 "TCD30_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD30_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1E002C++0x3 line.long 0x0 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1E002C++0x1B line.long 0x0 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD30_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD30_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD30_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD30_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1E0048++0x3 line.word 0x0 "TCD30_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E004A++0x5 line.word 0x0 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD30_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E004E++0x1 line.word 0x0 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1F0000++0x13 line.long 0x0 "CH31_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH31_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH31_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH31_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--20. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH31_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F0018++0x3 line.long 0x0 "CH31_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1F0020++0x7 line.long 0x0 "TCD31_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD31_SADDR_HIGH,TCD Source Address Register" hexmask.long.word 0x4 0.--11. 1. "SADDR,Source Address bits [63:32]" group.word 0x1F0028++0x3 line.word 0x0 "TCD31_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD31_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1F002C++0x3 line.long 0x0 "TCD31_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1F002C++0x1B line.long 0x0 "TCD31_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD31_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD31_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long.word 0x8 0.--11. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD31_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD31_DADDR_HIGH,TCD Destination Address Register" hexmask.long.word 0x10 0.--11. 1. "DADDR,Destination Address" line.long 0x14 "TCD31_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD31_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long.word 0x18 0.--11. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1F0048++0x3 line.word 0x0 "TCD31_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD31_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F004A++0x5 line.word 0x0 "TCD31_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD31_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--12. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." newline bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." newline bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." newline bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD31_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F004E++0x1 line.word 0x0 "TCD31_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--13. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" tree.end tree "CAMERA_ISI" base ad:0x4AD50000 group.long 0x0++0xBB line.long 0x0 "CHNL_CTRL,Channel Control" bitfld.long 0x0 31. "CHNL_EN,Enable Channel Processing" "0: Disabled,1: Enabled" newline bitfld.long 0x0 30. "CLK_EN,Channel Clock Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x0 29. "CHNL_BYPASS,Channel Bypass Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x0 25.--26. "CHAIN_BUF,Chain Line Buffer Control" "0: No line buffers chained (supports 2048 or less..,1: 2 line buffers chained (supports 4096 horizontal..,?,?" newline bitfld.long 0x0 24. "SW_RST,Software Reset Bit" "0: No reset,1: Channel pipeline is under software reset." newline bitfld.long 0x0 22. "RAW_MSB_ALIGN,RAW to MSB Align" "0: LSB aligned selection,1: MSB aligned selection" newline hexmask.long.byte 0x0 18.--21. 1. "VER_ID,Version ID" newline bitfld.long 0x0 16. "VC_ID_1,Virtual Channel ID" "0: Virtual Channel 0 to 3 selected.,1: Virtual Channel 4 to 7 selected." newline bitfld.long 0x0 8.--10. "SEC_LB_SRC,Secondary Line Buffer Source" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 6.--7. "VC_ID_0,Virtual Channel ID" "0: Virtual Channel 0 selected or no virtual channel..,1: Virtual Channel 1 selected.,2: Virtual Channel 2 selected.,3: Virtual Channel 3 selected." newline bitfld.long 0x0 4. "SRC_TYPE,Type of Selected Input Image Source" "0: Image input source is Pixel Link.,1: Image input source is Memory." newline bitfld.long 0x0 0.--2. "SRC,Input Image Source Port Selection" "0: Image will be sourced from input port 0 of the..,1: Image will be sourced from input port 1 of the..,2: Image will be sourced from input port 2 of the..,3: Image will be sourced from input port 3 of the..,4: Image will be sourced from input port 4 of the..,?,?,?" line.long 0x4 "CHNL_IMG_CTRL,Channel Image Control" hexmask.long.byte 0x4 24.--30. 1. "FORMAT,Output Image Format" newline hexmask.long.byte 0x4 16.--23. 1. "GBL_ALPHA_VAL,Global alpha value" newline bitfld.long 0x4 15. "GBL_ALPHA_EN,Global alpha value insertion enable" "0: Global Alpha value insertion is disabled,1: Global Alpha value insertion is enabled" newline bitfld.long 0x4 12.--14. "DEINT,De-interlace control" "0: No de-interlacing done,1: No de-interlacing done,2: Weave de-interlacing (Odd Even) method used,3: Weave de-interlacing (Even Odd) method used,4: Blending or linear interpolation (Odd + Even)..,5: Blending or linear interpolation (Even + Odd)..,6: Line doubling de-interlacing method used. Both..,7: Line doubling de-interlacing method used. Both.." newline bitfld.long 0x4 10.--11. "DEC_X,Horizontal pre-decimation control" "0: Pre-decimation filter is disabled. Bilinear..,1: Decimate by 2,2: Decimate by 4,3: Decimate by 8" newline bitfld.long 0x4 8.--9. "DEC_Y,Vertical pre-decimation control" "0: Pre-decimation filter is disabled. Bilinear..,1: Decimate by 2,2: Decimate by 4,3: Decimate by 8" newline bitfld.long 0x4 7. "CROP_EN,Output image cropping enable" "0: Image cropping is disabled,1: Image cropping is enabled" newline bitfld.long 0x4 6. "VFLIP_EN,Vertical flip control" "0: Vertical image flip disabled,1: Vertical image flip enabled" newline bitfld.long 0x4 5. "HFLIP_EN,Horizontal flip control" "0: Horizontal image flip disabled,1: Horizontal image flip enabled" newline rbitfld.long 0x4 4. "RSVD2,Reserved field. Reads only zeros" "0,1" newline bitfld.long 0x4 3. "YCBCR_MODE,YCbCr Mode" "0: YCbCr mode is disabled,1: YCbCr mode is enabled" newline bitfld.long 0x4 1.--2. "CSC_MODE,Color Space Conversion operating mode" "0: Convert from YUV to RGB,1: Convert from YCbCr to RGB,2: Convert from RGB to YUV,3: Convert from RGB to YCbCr" newline bitfld.long 0x4 0. "CSC_BYP,Color Space Conversion bypass control" "0: CSC is operational,1: CSC is bypassed" line.long 0x8 "CHNL_OUT_BUF_CTRL,Channel Output Buffer Control" bitfld.long 0x8 31. "MAX_WR_BEATS_Y,Maximum AXI write beats for Y-buffer" "0: Maximum write beats per write request are 8..,1: Maximum write beats per write request are 16.." newline bitfld.long 0x8 30. "MAX_WR_BEATS_UV,Maximum AXI write beats for U and V-buffers" "0: Maximum write beats per write request are 8..,1: Maximum write beats per write request are 16.." newline hexmask.long.byte 0x8 16.--19. 1. "PANIC_SET_THD_V,Overflow panic set threshold value for V output buffer" newline bitfld.long 0x8 15. "LOAD_BUF2_ADDR,Load Buffer 2 Address from CHNLOUT_BUF2_ADDR_* registers" "0,1" newline bitfld.long 0x8 14. "LOAD_BUF1_ADDR,Load Buffer 1 Address from CHNLOUT_BUF1_ADDR_* registers" "0,1" newline hexmask.long.byte 0x8 8.--11. 1. "PANIC_SET_THD_U,Overflow panic set threshold value for U output buffer" newline hexmask.long.byte 0x8 0.--3. 1. "PANIC_SET_THD_Y,Overflow panic set threshold value for Y/RGB output buffer" line.long 0xC "CHNL_IMG_CFG,Channel Image Configuration" rbitfld.long 0xC 30.--31. "RSVD1,Reserved field. Reads only zeros." "0,1,2,3" newline hexmask.long.word 0xC 16.--29. 1. "HEIGHT,Input image height (lines)" newline rbitfld.long 0xC 13.--15. "RSVD0,Reserved field. Reads only zeros." "0,1,2,3,4,5,6,7" newline hexmask.long.word 0xC 0.--12. 1. "WIDTH,Input image width (pixels)" line.long 0x10 "CHNL_IER,Channel Interrupt Enable" bitfld.long 0x10 31. "MEM_RD_DONE_EN,Memory read complete interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 30. "LINE_RCVD_EN,Line received interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 29. "FRM_RCVD_EN,Frame received interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 28. "AXI_WR_ERR_V_EN,AXI bus read error interrupt enable bit for V data buffer" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 27. "AXI_WR_ERR_U_EN,AXI bus read error interrupt enable bit for U data buffer" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 26. "AXI_WR_ERR_Y_EN,AXI bus read error interrupt enable bit for Y/RGB data buffer" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 25. "AXI_RD_ERR_EN,AXI bus read error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 23. "PANIC_V_BUF_EN,V output buffer potential overflow panic interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 22. "OFLW_V_BUF_EN,V output buffer overflow interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 21. "PANIC_U_BUF_EN,U output buffer potential overflow panic interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 20. "OFLW_U_BUF_EN,U output buffer overflow interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 19. "PANIC_Y_BUF_EN,Y output buffer potential overflow panic interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 18. "OFLW_Y_BUF_EN,Y output buffer overflow interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 17. "EARLY_VSYNC_ERR_EN,VSYNC timing (Early) error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 16. "LATE_VSYNC_ERR_EN,VSYNC timing (Late) error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 6. "OUT_MEM_LOC_V_EN,Tentative write out of valid Channel Chroma (V/Cr) Output Buffer error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 5. "OUT_MEM_LOC_U_EN,Tentative write out of valid Channel Chroma (U/Cb/UV/CbCr) Output Buffer error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 4. "OUT_MEM_LOC_Y_EN,Tentative write out of valid Channel RGB or Luma (Y) Output Buffer error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 3. "LATE_HSYNC_ERR_EN,HSYNC timing (Late) error interrupt flag error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 2. "LATE_HSYNC2_ERR_EN,HSYNC timing (Late) error interrupt enable bit for RAW32 staggered pixel lines" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 1. "FRAME_NO_PIXEL_ERR_EN,No pixel data is detected in a frame error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x10 0. "LINE_NO_PIXEL_ERR_EN,No pixel data is detected in a line error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" line.long 0x14 "CHNL_STS,Channel Status" eventfld.long 0x14 31. "MEM_RD_DONE,Memory read complete interrupt flag" "0: Image read from memory not complete or not started,1: Image read from memory completed" newline eventfld.long 0x14 30. "LINE_STRD,Line received and stored interrupt flag" "0: No new line received,1: New line received and stored into memory" newline eventfld.long 0x14 29. "FRM_STRD,Frame stored successfully interrupt flag" "0: No frame being received or in progress,1: One full frame has been received and stored in.." newline eventfld.long 0x14 28. "AXI_WR_ERR_V,AXI Bus write error interrupt flag for V data buffer" "0: No error,1: Error occurred during write" newline eventfld.long 0x14 27. "AXI_WR_ERR_U,AXI Bus write error interrupt flag for U data buffer" "0: No error,1: Error occurred during write" newline eventfld.long 0x14 26. "AXI_WR_ERR_Y,AXI Bus write error interrupt flag for Y/RGB data buffer" "0: No error,1: Error occurred during write" newline eventfld.long 0x14 25. "AXI_RD_ERR,AXI Bus read error interrupt flag" "0: No error,1: Error occurred during read" newline eventfld.long 0x14 23. "PANIC_V_BUF,V output buffer potential overflow panic alert interrupt flag" "0: Buffer has not crossed the panic threshold limit,1: Panic threshold limit crossed. Software must.." newline eventfld.long 0x14 22. "OFLW_V_BUF,Overflow in U output buffer interrupt flag" "0: No overflow,1: Overflow has occurred in the channel" newline eventfld.long 0x14 21. "PANIC_U_BUF,U output buffer potential overflow panic alert interrupt flag" "0: Buffer has not crossed the panic threshold limit,1: Panic threshold limit crossed. Software must.." newline eventfld.long 0x14 20. "OFLW_U_BUF,Overflow in U output buffer interrupt flag" "0: No overflow,1: Overflow has occurred in the channel" newline eventfld.long 0x14 19. "PANIC_Y_BUF,Y/RGB output buffer potential overflow panic alert interrupt flag" "0: Buffer has not crossed the panic threshold limit,1: Panic threshold limit crossed. Software must.." newline eventfld.long 0x14 18. "OFLW_Y_BUF,Overflow in Y/RGB output buffer interrupt flag" "0: No overflow,1: Overflow has occurred in the channel" newline eventfld.long 0x14 17. "EARLY_VSYNC_ERR,VSYNC timing (Early) error interrupt flag" "0: No error,1: VSYNC detected earlier than expected" newline eventfld.long 0x14 16. "LATE_VSYNC_ERR,VSYNC timing (Late) error interrupt flag" "0: No error,1: VSYNC detected later than expected" newline rbitfld.long 0x14 10. "MEM_RD_OFLOW,Memory read FIFO overflow error status" "0: No overflow occurred during memory read,1: FIFO overflow occurred during memory read" newline rbitfld.long 0x14 9. "BUF2_ACTIVE,Current frame being stored in Buffer 2 Address" "0: Buffer 2 Address inactive,1: Buffer 2 Address in use" newline rbitfld.long 0x14 8. "BUF1_ACTIVE,Current frame being stored in Buffer 1 Address" "0: Buffer 1 Address inactive,1: Buffer 1 Address in use" newline eventfld.long 0x14 6. "OUT_MEM_LOC_V,Tentative write is detected out of valid Channel Chroma (V/Cr) Output Buffer" "0: No error,1: Tentative write is detected" newline eventfld.long 0x14 5. "OUT_MEM_LOC_U,Tentative write is detected out of valid Channel Chroma (U/Cb/UV/CbCr) Output Buffer" "0: No error,1: Tentative write is detected" newline eventfld.long 0x14 4. "OUT_MEM_LOC_Y,Tentative write out of valid Channel RGB or Luma (Y) Output Buffer" "0: No error,1: Tentative write is detected" newline eventfld.long 0x14 3. "LATE_HSYNC_ERR,HSYNC timing (Late) error interrupt flag" "0: No error,1: HSYNC detected later than expected" newline eventfld.long 0x14 2. "LATE_HSYNC2_ERR,HSYNC timing (Late) error interrupt flag for RAW32 staggered pixel lines" "0: No error,1: HSYNC detected later than expected" newline eventfld.long 0x14 1. "FRAME_NO_PIXEL,No pixel data is detected in a frame" "0: No error,1: No pixel is detected in a frame" newline eventfld.long 0x14 0. "LINE_NO_PIXEL,No pixel data is detected in a line" "0: No error,1: No pixel is detected in a line" line.long 0x18 "CHNL_SCALE_FACTOR,Channel Scale Factor" rbitfld.long 0x18 30.--31. "RSVD0,Reserved field. Reads only zeros" "0,1,2,3" newline hexmask.long.word 0x18 16.--29. 1. "Y_SCALE,Vertical scaling factor" newline rbitfld.long 0x18 14.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3" newline hexmask.long.word 0x18 0.--13. 1. "X_SCALE,Horizontal scaling factor" line.long 0x1C "CHNL_SCALE_OFFSET,Channel Scale Offset" hexmask.long.byte 0x1C 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x1C 16.--27. 1. "Y_OFFSET,Vertical scaling offset" newline hexmask.long.byte 0x1C 12.--15. 1. "RSVD1,Reserved field. Reads only zeros" newline hexmask.long.word 0x1C 0.--11. 1. "X_OFFSET,Horizontal scaling offset" line.long 0x20 "CHNL_CROP_ULC,Channel Crop Upper Left Corner Coordinate" hexmask.long.byte 0x20 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x20 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x20 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x20 0.--12. 1. "Y,Upper Left Y-coordinate" line.long 0x24 "CHNL_CROP_LRC,Channel Crop Lower Right Corner Coordinate" hexmask.long.byte 0x24 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x24 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x24 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x24 0.--12. 1. "Y,Lower Right Y-coordinate" line.long 0x28 "CHNL_CSC_COEFF0,Channel Color Space Conversion Coefficient 0" hexmask.long.byte 0x28 27.--31. 1. "RSVD0,Reserved Field. Reads only zeros" newline hexmask.long.word 0x28 16.--26. 1. "A2,CSC Coefficient A2 value" newline hexmask.long.byte 0x28 11.--15. 1. "RSVD1,Reserved Field. Reads only zeros" newline hexmask.long.word 0x28 0.--10. 1. "A1,CSC Coefficient A1 value" line.long 0x2C "CHNL_CSC_COEFF1,Channel Color Space Conversion Coefficient 1" hexmask.long.byte 0x2C 27.--31. 1. "RSVD0,Reserved Field. Reads only zeros" newline hexmask.long.word 0x2C 16.--26. 1. "B1,CSC Coefficient B1 value" newline hexmask.long.byte 0x2C 11.--15. 1. "RSVD1,Reserved Field. Reads only zeros" newline hexmask.long.word 0x2C 0.--10. 1. "A3,CSC Coefficient A3 value" line.long 0x30 "CHNL_CSC_COEFF2,Channel Color Space Conversion Coefficient 2" hexmask.long.byte 0x30 27.--31. 1. "RSVD0,Reserved Field. Reads only zeros" newline hexmask.long.word 0x30 16.--26. 1. "B3,CSC Coefficient B3 value" newline hexmask.long.byte 0x30 11.--15. 1. "RSVD1,Reserved Field. Reads only zeros" newline hexmask.long.word 0x30 0.--10. 1. "B2,CSC Coefficient B2 value" line.long 0x34 "CHNL_CSC_COEFF3,Channel Color Space Conversion Coefficient 3" hexmask.long.byte 0x34 27.--31. 1. "RSVD0,Reserved Field. Reads only zeros" newline hexmask.long.word 0x34 16.--26. 1. "C2,CSC Coefficient C2 value" newline hexmask.long.byte 0x34 11.--15. 1. "RSVD1,Reserved Field. Reads only zeros" newline hexmask.long.word 0x34 0.--10. 1. "C1,CSC Coefficient C1 value" line.long 0x38 "CHNL_CSC_COEFF4,Channel Color Space Conversion Coefficient 4" hexmask.long.byte 0x38 25.--31. 1. "RSVD0,Reserved Field. Reads only zeros" newline hexmask.long.word 0x38 16.--24. 1. "D1,CSC Coefficient D1 value" newline hexmask.long.byte 0x38 11.--15. 1. "RSVD1,Reserved Field. Reads only zeros" newline hexmask.long.word 0x38 0.--10. 1. "C3,CSC Coefficient C3 value" line.long 0x3C "CHNL_CSC_COEFF5,Channel Color Space Conversion Coefficient 5" hexmask.long.byte 0x3C 25.--31. 1. "RSVD0,Reserved Field. Reads only zeros" newline hexmask.long.word 0x3C 16.--24. 1. "D3,CSC Coefficient D3 value" newline hexmask.long.byte 0x3C 9.--15. 1. "RSVD1,Reserved Field. Reads only zeros" newline hexmask.long.word 0x3C 0.--8. 1. "D2,CSC Coefficient D2 value" line.long 0x40 "CHNL_ROI_0_ALPHA,Channel Alpha Value for Region of Interest 0" hexmask.long.byte 0x40 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" newline hexmask.long.byte 0x40 17.--23. 1. "RSVD0,Reserved field. Reads only zeros" newline bitfld.long 0x40 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" newline hexmask.long.word 0x40 0.--15. 1. "RSVD1,Reserved field. Reads only zeros" line.long 0x44 "CHNL_ROI_0_ULC,Channel Upper Left Coordinate for Region of Interest 0" hexmask.long.byte 0x44 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x44 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x44 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x44 0.--12. 1. "Y,Upper Left Y-coordinate" line.long 0x48 "CHNL_ROI_0_LRC,Channel Lower Right Coordinate for Region of Interest 0" hexmask.long.byte 0x48 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x48 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x48 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x48 0.--12. 1. "Y,Lower Right Y-coordinate" line.long 0x4C "CHNL_ROI_1_ALPHA,Channel Alpha Value for Region of Interest 1" hexmask.long.byte 0x4C 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" newline hexmask.long.byte 0x4C 17.--23. 1. "RSVD0,Reserved field. Reads only zeros" newline bitfld.long 0x4C 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" newline hexmask.long.word 0x4C 0.--15. 1. "RSVD1,Reserved field. Reads only zeros" line.long 0x50 "CHNL_ROI_1_ULC,Channel Upper Left Coordinate for Region of Interest 1" hexmask.long.byte 0x50 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x50 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x50 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x50 0.--12. 1. "Y,Upper Left Y-coordinate" line.long 0x54 "CHNL_ROI_1_LRC,Channel Lower Right Coordinate for Region of Interest 1" hexmask.long.byte 0x54 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x54 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x54 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x54 0.--12. 1. "Y,Lower Right Y-coordinate" line.long 0x58 "CHNL_ROI_2_ALPHA,Channel Alpha Value for Region of Interest 2" hexmask.long.byte 0x58 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" newline hexmask.long.byte 0x58 17.--23. 1. "RSVD0,Reserved field. Reads only zeros" newline bitfld.long 0x58 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" newline hexmask.long.word 0x58 0.--15. 1. "RSVD1,Reserved field. Reads only zeros" line.long 0x5C "CHNL_ROI_2_ULC,Channel Upper Left Coordinate for Region of Interest 2" hexmask.long.byte 0x5C 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x5C 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x5C 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x5C 0.--12. 1. "Y,Upper Left Y-coordinate" line.long 0x60 "CHNL_ROI_2_LRC,Channel Lower Right Coordinate for Region of Interest 2" hexmask.long.byte 0x60 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x60 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x60 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x60 0.--12. 1. "Y,Lower Right Y-coordinate" line.long 0x64 "CHNL_ROI_3_ALPHA,Channel Alpha Value for Region of Interest 3" hexmask.long.byte 0x64 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" newline hexmask.long.byte 0x64 17.--23. 1. "RSVD0,Reserved field. Reads only zeros" newline bitfld.long 0x64 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" newline hexmask.long.word 0x64 0.--15. 1. "RSVD1,Reserved field. Reads only zeros" line.long 0x68 "CHNL_ROI_3_ULC,Channel Upper Left Coordinate for Region of Interest 3" hexmask.long.byte 0x68 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x68 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x68 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x68 0.--12. 1. "Y,Upper Left Y-coordinate" line.long 0x6C "CHNL_ROI_3_LRC,Channel Lower Right Coordinate for Region of Interest 3" hexmask.long.byte 0x6C 28.--31. 1. "RSVD0,Reserved field. Reads only zeros" newline hexmask.long.word 0x6C 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x6C 13.--15. "RSVD1,Reserved field. Reads only zeros" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x6C 0.--12. 1. "Y,Lower Right Y-coordinate" line.long 0x70 "CHNL_OUT_BUF1_ADDR_Y,Channel RGB or Luma (Y) Output Buffer 1 Address" hexmask.long 0x70 0.--31. 1. "ADDR,Starting address for the RGB or Y (luma) memory location" line.long 0x74 "CHNL_OUT_BUF1_ADDR_U,Channel Chroma (U/Cb/UV/CbCr) Output Buffer 1 Address" hexmask.long 0x74 0.--31. 1. "ADDR,Starting address for the U/Cb or 2 plane UV/CbCr Chroma memory location" line.long 0x78 "CHNL_OUT_BUF1_ADDR_V,Channel Chroma (V/Cr) Output Buffer 1 Address" hexmask.long 0x78 0.--31. 1. "ADDR,Starting address for the V/Cr memory location" line.long 0x7C "CHNL_OUT_BUF_PITCH,Channel Output Buffer Pitch" hexmask.long.word 0x7C 0.--15. 1. "LINE_PITCH,Output Buffer Line Pitch" line.long 0x80 "CHNL_IN_BUF_ADDR,Channel Input Buffer Address" hexmask.long 0x80 0.--31. 1. "ADDR,Starting Address from where the input image is read in from" line.long 0x84 "CHNL_IN_BUF_PITCH,Channel Input Buffer Pitch" hexmask.long.word 0x84 16.--31. 1. "FRM_PITCH,Frame Pitch" newline hexmask.long.word 0x84 0.--15. 1. "LINE_PITCH,Line Pitch" line.long 0x88 "CHNL_MEM_RD_CTRL,Channel Memory Read Control" hexmask.long.byte 0x88 28.--31. 1. "IMG_TYPE,Input image format" newline hexmask.long 0x88 1.--27. 1. "RSVD0,Reserved field. Reads only zeros" newline bitfld.long 0x88 0. "READ_MEM,Initiate read from memory" "0: No reads from memory done,1: Reads from memory initiated" line.long 0x8C "CHNL_OUT_BUF2_ADDR_Y,Channel RGB or Luma (Y) Output Buffer 2 Address" hexmask.long 0x8C 0.--31. 1. "ADDR,Starting address for the RGB or Y (luma) memory location" line.long 0x90 "CHNL_OUT_BUF2_ADDR_U,Channel Chroma (U/Cb/UV/CbCr) Output Buffer 2 Address" hexmask.long 0x90 0.--31. 1. "ADDR,Starting address for the U/Cb or 2 plane UV/CbCr Chroma memory location" line.long 0x94 "CHNL_OUT_BUF2_ADDR_V,Channel Chroma (V/Cr) Output Buffer 2 Address" hexmask.long 0x94 0.--31. 1. "ADDR,Starting address for the V/Cr memory location" line.long 0x98 "CHNL_SCL_IMG_CFG,Channel Scaled Image Configuration" rbitfld.long 0x98 30.--31. "RSVD3,Reserved" "0,1,2,3" newline hexmask.long.word 0x98 16.--29. 1. "HEIGHT,Scaled image height (lines)" newline rbitfld.long 0x98 13.--15. "RSVD1,Reserved" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x98 0.--12. 1. "WIDTH,Scaled image width (pixels)" line.long 0x9C "CHNL_FLOW_CTRL,Channel Flow Control" hexmask.long.byte 0x9C 16.--23. 1. "FC_NUMER,Numerator value of fraction of usable bandwidth" newline hexmask.long.byte 0x9C 0.--7. 1. "FC_DENOM,Denominator value of fraction of usable bandwidth" line.long 0xA0 "CHNL_Y_BUF1_XTND_ADDR,Channel Output Y-Buffer 1 Extended Address Bits" hexmask.long.word 0xA0 0.--11. 1. "Y1ADDR_MSB,Extended Address Most Significant Bits" line.long 0xA4 "CHNL_U_BUF1_XTND_ADDR,Channel Output U-Buffer 1 Extended Address Bits" hexmask.long.word 0xA4 0.--11. 1. "U1ADDR_MSB,Extended Address Most Significant Bits" line.long 0xA8 "CHNL_V_BUF1_XTND_ADDR,Channel Output V-Buffer 1 Extended Address Bits" hexmask.long.word 0xA8 0.--11. 1. "V1ADDR_MSB,Extended Address Most Significant Bits" line.long 0xAC "CHNL_Y_BUF2_XTND_ADDR,Channel Output Y-Buffer 2 Extended Address Bits" hexmask.long.word 0xAC 0.--11. 1. "Y2ADDR_MSB,Extended Address Most Significant Bits" line.long 0xB0 "CHNL_U_BUF2_XTND_ADDR,Channel Output U-Buffer 2 Extended Address Bits" hexmask.long.word 0xB0 0.--11. 1. "U2ADDR_MSB,Extended Address Most Significant Bits" line.long 0xB4 "CHNL_V_BUF2_XTND_ADDR,Channel Output V-Buffer 2 Extended Address Bits" hexmask.long.word 0xB4 0.--11. 1. "V2ADDR_MSB,Extended Address Most Significant Bits" line.long 0xB8 "CHNL_IN_BUF_XTND_ADDR,Channel Input Buffer Extended Address Bits" hexmask.long.word 0xB8 0.--11. 1. "XADDR_MSB,Extended Address Most Significant Bits" group.long 0xC0++0x1B line.long 0x0 "PIXEL_DATA_ADDR_OFFSET,RAW32 Pixel Data Offset" hexmask.long 0x0 0.--31. 1. "PIXEL_OFFSET,Pixel Data Offset" line.long 0x4 "STAT_DATA_ADDR_OFFSET,RAW32 Statistics Data Offset" hexmask.long 0x4 0.--31. 1. "STAT_OFFSET,Statistics Data Offset" line.long 0x8 "CHNL_IMG_CFG2,Channel Image Configuration 2" hexmask.long.tbyte 0x8 13.--31. 1. "RSVD0,Reserved field. Reads only zeros." newline hexmask.long.word 0x8 0.--12. 1. "WIDTH,Input image width (pixels)" line.long 0xC "CHNL_IMG_CFG3,Channel Image Configuration 3" hexmask.long.tbyte 0xC 13.--31. 1. "RSVD0,Reserved field. Reads only zeros." newline hexmask.long.word 0xC 0.--12. 1. "HEIGHT,Non-pixel data height" line.long 0x10 "CHNL_OUT_BUF_MAX_SIZE_Y,Channel RGB or Luma (Y) Output Buffer Max Size" hexmask.long 0x10 0.--31. 1. "MS,Max Size" line.long 0x14 "CHNL_OUT_BUF_MAX_SIZE_U,Channel Chroma (U/Cb/UV/CbCr) Output Buffer Max Size" hexmask.long 0x14 0.--31. 1. "MS,Max Size" line.long 0x18 "CHNL_OUT_BUF_MAX_SIZE_V,Channel Chroma (V/Cr) Output Buffer Max Size" hexmask.long 0x18 0.--31. 1. "MS,Max Size" tree.end tree "CAMERA_ISP" tree "ALIAS" base ad:0x4AE02000 repeat 84. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2)++0x3 line.long 0x0 "ALIAS_REG[$1],Alias CTXT_ITER Read Register" hexmask.long 0x0 0.--31. 1. "VAL,Read only value: Returns contents of target register." repeat.end tree.end tree "AUTOFOCUS" base ad:0x4AE01700 group.long 0x0++0x47 line.long 0x0 "ROI0_POS_CAM0,Camera 0 Autofocus ROI 0 Position Register" hexmask.long.word 0x0 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x0 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x4 "ROI0_SIZE_CAM0,Camera 0 Autofocus ROI 0 Size Register" hexmask.long.word 0x4 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x4 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x8 "ROI1_POS_CAM0,Camera 0 Autofocus ROI 1 Position Register" hexmask.long.word 0x8 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x8 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0xC "ROI1_SIZE_CAM0,Camera 0 Autofocus ROI 1 Size Register" hexmask.long.word 0xC 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0xC 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x10 "ROI2_POS_CAM0,Camera 0 Autofocus ROI 2 Position Register" hexmask.long.word 0x10 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x10 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x14 "ROI2_SIZE_CAM0,Camera 0 Autofocus ROI 2 Size Register" hexmask.long.word 0x14 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x14 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x18 "ROI3_POS_CAM0,Camera 0 Autofocus ROI 3 Position Register" hexmask.long.word 0x18 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x18 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x1C "ROI3_SIZE_CAM0,Camera 0 Autofocus ROI 3 Size Register" hexmask.long.word 0x1C 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x1C 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x20 "ROI4_POS_CAM0,Camera 0 Autofocus ROI 4 Position Register" hexmask.long.word 0x20 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x20 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x24 "ROI4_SIZE_CAM0,Camera 0 Autofocus ROI 4 Size Register" hexmask.long.word 0x24 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x24 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x28 "ROI5_POS_CAM0,Camera 0 Autofocus ROI 5 Position Register" hexmask.long.word 0x28 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x28 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x2C "ROI5_SIZE_CAM0,Camera 0 Autofocus ROI 5 Size Register" hexmask.long.word 0x2C 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x2C 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x30 "ROI6_POS_CAM0,Camera 0 Autofocus ROI 6 Position Register" hexmask.long.word 0x30 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x30 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x34 "ROI6_SIZE_CAM0,Camera 0 Autofocus ROI 6 Size Register" hexmask.long.word 0x34 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x34 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x38 "ROI7_POS_CAM0,Camera 0 Autofocus ROI 7 Position Register" hexmask.long.word 0x38 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x38 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x3C "ROI7_SIZE_CAM0,Camera 0 Autofocus ROI 7 Size Register" hexmask.long.word 0x3C 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x3C 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." line.long 0x40 "ROI8_POS_CAM0,Camera 0 Autofocus ROI 8 Position Register" hexmask.long.word 0x40 16.--31. 1. "YPOS,YPOS: Vertical line start position" hexmask.long.word 0x40 0.--15. 1. "XPOS,XPOS: Horizontal pixel start position" line.long 0x44 "ROI8_SIZE_CAM0,Camera 0 Autofocus ROI 8 Size Register" hexmask.long.word 0x44 16.--31. 1. "HEIGHT,Height: Vertical height of the ROI." hexmask.long.word 0x44 0.--15. 1. "WIDTH,Width: Horizontal width of the ROI." group.long 0x50++0x1F line.long 0x0 "FIL0_COEFFS0_CAM0,Camera 0 Autofocus Filter 0 Coefficient Set 0 Register" hexmask.long.byte 0x0 24.--31. 1. "COEFF3,Coefficient3: coefficient in signed format" hexmask.long.byte 0x0 16.--23. 1. "COEFF2,Coefficient2: coefficient in signed format" hexmask.long.byte 0x0 8.--15. 1. "COEFF1,Coefficient1: coefficient in signed format" hexmask.long.byte 0x0 0.--7. 1. "COEFF0,Coefficient0: coefficient in signed format" line.long 0x4 "FIL0_COEFFS1_CAM0,Camera 0 Autofocus Filter 0 Coefficient Set 1 Register" hexmask.long.byte 0x4 24.--31. 1. "COEFF7,Coefficient7: coefficient in signed format" hexmask.long.byte 0x4 16.--23. 1. "COEFF6,Coefficient6: coefficient in signed format" hexmask.long.byte 0x4 8.--15. 1. "COEFF5,Coefficient1: coefficient in signed format" hexmask.long.byte 0x4 0.--7. 1. "COEFF4,Coefficient4: coefficient in signed format" line.long 0x8 "FIL0_COEFFS2_CAM0,Camera 0 Autofocus Filter 0 Coefficient Set 2 Register" hexmask.long.byte 0x8 0.--7. 1. "COEFF8,Coefficient8: coefficient in signed format" line.long 0xC "FIL0_SHIFT_CAM0,Camera 0 Autofocus Filter 0 Shift Register" hexmask.long.byte 0xC 0.--4. 1. "SHIFT,Shift-value: 5-bit shift value." line.long 0x10 "FIL1_COEFFS0_CAM0,Camera 0 Autofocus Filter 1 Coefficient Set 0 Register" hexmask.long.byte 0x10 24.--31. 1. "COEFF3,Coefficient3: coefficient in signed format" hexmask.long.byte 0x10 16.--23. 1. "COEFF2,Coefficient2: coefficient in signed format" hexmask.long.byte 0x10 8.--15. 1. "COEFF1,Coefficient1: coefficient in signed format" hexmask.long.byte 0x10 0.--7. 1. "COEFF0,Coefficient0: coefficient in signed format" line.long 0x14 "FIL1_COEFFS1_CAM0,Camera 0 Autofocus Filter 1 Coefficient Set 1 Register" hexmask.long.byte 0x14 24.--31. 1. "COEFF7,Coefficient7: coefficient in signed format" hexmask.long.byte 0x14 16.--23. 1. "COEFF6,Coefficient6: coefficient in signed format" hexmask.long.byte 0x14 8.--15. 1. "COEFF5,Coefficient1: coefficient in signed format" hexmask.long.byte 0x14 0.--7. 1. "COEFF4,Coefficient4: coefficient in signed format" line.long 0x18 "FIL1_COEFFS2_CAM0,Camera 0 Autofocus Filter 1 Coefficient Set 2 Register" hexmask.long.byte 0x18 0.--7. 1. "COEFF8,Coefficient8: coefficient in signed format" line.long 0x1C "FIL1_SHIFT_CAM0,Camera 0 Autofocus Filter 1 Shift Register" hexmask.long.byte 0x1C 0.--4. 1. "SHIFT,Shift-value: 5-bit shift value." rgroup.long 0x70++0x47 line.long 0x0 "ROI0_SUM0_CAM0,Camera 0 Autofocus ROI 0 SUM Filter 0 Register" hexmask.long 0x0 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x4 "ROI0_SUM1_CAM0,Camera 0 Autofocus ROI 0 SUM Filter 1 Register" hexmask.long 0x4 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x8 "ROI1_SUM0_CAM0,Camera 0 Autofocus ROI 1 SUM Filter 0 Register" hexmask.long 0x8 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0xC "ROI1_SUM1_CAM0,Camera 0 Autofocus ROI 1 SUM Filter 1 Register" hexmask.long 0xC 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x10 "ROI2_SUM0_CAM0,Camera 0 Autofocus ROI 2 SUM Filter 0 Register" hexmask.long 0x10 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x14 "ROI2_SUM1_CAM0,Camera 0 Autofocus ROI 2 SUM Filter 1 Register" hexmask.long 0x14 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x18 "ROI3_SUM0_CAM0,Camera 0 Autofocus ROI 3 SUM Filter 0 Register" hexmask.long 0x18 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x1C "ROI3_SUM1_CAM0,Camera 0 Autofocus ROI 3 SUM Filter 1 Register" hexmask.long 0x1C 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x20 "ROI4_SUM0_CAM0,Camera 0 Autofocus ROI 4 SUM Filter 0 Register" hexmask.long 0x20 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x24 "ROI4_SUM1_CAM0,Camera 0 Autofocus ROI 4 SUM Filter 1 Register" hexmask.long 0x24 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x28 "ROI5_SUM0_CAM0,Camera 0 Autofocus ROI 5 SUM Filter 0 Register" hexmask.long 0x28 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x2C "ROI5_SUM1_CAM0,Camera 0 Autofocus ROI 5 SUM Filter 1 Register" hexmask.long 0x2C 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x30 "ROI6_SUM0_CAM0,Camera 0 Autofocus ROI 6 SUM Filter 0 Register" hexmask.long 0x30 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x34 "ROI6_SUM1_CAM0,Camera 0 Autofocus ROI 6 SUM Filter 1 Register" hexmask.long 0x34 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x38 "ROI7_SUM0_CAM0,Camera 0 Autofocus ROI 7 SUM Filter 0 Register" hexmask.long 0x38 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x3C "ROI7_SUM1_CAM0,Camera 0 Autofocus ROI 7 SUM Filter 1 Register" hexmask.long 0x3C 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." line.long 0x40 "ROI8_SUM0_CAM0,Camera 0 Autofocus ROI 8 SUM Filter 0 Register" hexmask.long 0x40 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 0." line.long 0x44 "ROI8_SUM1_CAM0,Camera 0 Autofocus ROI 8 SUM Filter 1 Register" hexmask.long 0x44 0.--31. 1. "SUM,SUM: 32-bit sum value for filter 1." tree.end tree "BNR" base ad:0x4AE00800 group.long 0x0++0x5B line.long 0x0 "CTRL_CAM0,Camera 0 BNR Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls the enabling or disabling of the BNR unit for respective camera context" "0: Disabled,1: Enabled" bitfld.long 0x0 16. "NHOOD,Neighbourhood Pattern: Indicates the NHOOD channel is how many pixels location apart (for both horizontal and vertical NHOOD)" "0: 2x2 NHOOD is 2 pixel positions,1: 1x1 NHOOD is 1 pixel position" newline bitfld.long 0x0 8.--10. "DEBUG,Debug view for on-target tuning" "0: Off,1: Final edge decision vs texture,2: Final edge decision vs black,3: Edge pixel decision according to L filter rule,4: Edge pixel decision according to S filter rule,5: L vs S decision,?,?" bitfld.long 0x0 2.--3. "OBPP,OBPP: Indicates the size of pixel components that should be outputted from the BNR unit" "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" line.long 0x4 "YPEAK_CAM0,Camera 0 BNR YPEAK register" bitfld.long 0x4 31. "PEAK_OUTSEL,PEAK_OUTSEL: Provides selection for scaling the output of the clipping function of the BNR unit." "0: No scaling,1: Enable scaling. The clipped output is scaled.." hexmask.long.word 0x4 16.--27. 1. "PEAK_HIGH,PEAK_HIGH: Higher scale value of the clipping function. Value specified is in u4.8 format." newline bitfld.long 0x4 14.--15. "PEAK_SEL,PEAK_SEL: Provides selection for selecting the boundary pixel among the sorted list" "0: Select pixel at 1 position away from the extreme,1: Select pixel at 2 position away from the extreme,2: Select pixel at 3 position away from the extreme,3: Select pixel at 4 position from the extreme.." hexmask.long.word 0x4 0.--11. 1. "PEAK_LOW,PEAK_LOW: Lower scale value of the clipping function. Value specified is in u4.8 format." line.long 0x8 "YEDGE_TH0_CAM0,Camera 0 BNR YEdge Threshold 0 Register" hexmask.long.tbyte 0x8 0.--19. 1. "EDGE_TH0,Edge Threshold 0: 20-bit lower threshold for blending coefficient calculation" line.long 0xC "YEDGE_SCALE_CAM0,Camera 0 BNR Long YEdge Scale Register" hexmask.long.byte 0xC 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for blending factor determination" hexmask.long.word 0xC 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for blending factor determination" line.long 0x10 "YEDGES_TH0_CAM0,Camera 0 BNR Short Y Edge Threshold 0 Register" hexmask.long.tbyte 0x10 0.--19. 1. "EDGE_TH0,Edge Threshold 0: 20-bit lower threshold for blending coefficient calculation" line.long 0x14 "YEDGES_SCALE_CAM0,Camera 0 BNR Short YEdge Scale Register" hexmask.long.byte 0x14 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for blending factor determination" hexmask.long.word 0x14 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for blending factor determination" line.long 0x18 "YEDGEA_TH0_CAM0,Camera 0 BNR Alpha Y Edge Threshold 0 Register" hexmask.long.tbyte 0x18 0.--19. 1. "EDGE_TH0,Edge Threshold 0: 20-bit lower threshold for blending coefficient calculation" line.long 0x1C "YEDGEA_SCALE_CAM0,Camera 0 BNR Alpha YEdge Scale Register" hexmask.long.byte 0x1C 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for blending factor determination" hexmask.long.word 0x1C 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for blending factor determination" line.long 0x20 "YLUMA_X_TH0_CAM0,Camera 0 BNR YLuma X Threshold 0 Register" hexmask.long.tbyte 0x20 0.--19. 1. "TH,TH: 20-bit value for X threshold 0." line.long 0x24 "YLUMA_Y_TH_CAM0,Camera 0 BNR YLuma Y Threshold Register" hexmask.long.word 0x24 16.--25. 1. "LUMA_Y_TH1,LUMA_Y_TH1: 10-bit value for Y threshold 1." hexmask.long.word 0x24 0.--9. 1. "LUMA_Y_TH0,LUMA_Y_TH0: 10-bit value for Y threshold 0." line.long 0x28 "YLUMA_SCALE_CAM0,Camera 0 BNR YLuma Scale Register" hexmask.long.byte 0x28 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for luma determination" hexmask.long.word 0x28 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for luma determination" line.long 0x2C "YALPHA_GAIN_CAM0,Camera 0 BNR YAlpha Gain Register" hexmask.long.word 0x2C 16.--31. 1. "OFFSET,Offset: Provides the offset value (addition factor) for the gain'd alpha coefficient determined by BNR operation" hexmask.long.word 0x2C 0.--15. 1. "GAIN,Gain: Provides the gain value (multiplication factor) for the alpha coefficient determined by BNR operation" line.long 0x30 "CPEAK_CAM0,Camera 0 BNR CPEAK register" bitfld.long 0x30 31. "PEAK_OUTSEL,PEAK_OUTSEL: Provides selection for scaling the output of the clipping function of the BNR unit." "0: No scaling,1: Enable scaling. The clipped output is scaled.." hexmask.long.word 0x30 16.--27. 1. "PEAK_HIGH,PEAK_HIGH: Higher scale value of the clipping function. Value specified is in u4.8 format." newline bitfld.long 0x30 14.--15. "PEAK_SEL,PEAK_SEL: Provides selection for selecting the boundary pixel among the sorted list" "0: Select pixel at 1 position away from the extreme,1: Select pixel at 2 position away from the extreme,2: Select pixel at 3 position away from the extreme,3: Select pixel at 4 position from the extreme.." hexmask.long.word 0x30 0.--11. 1. "PEAK_LOW,PEAK_LOW: Lower scale value of the clipping function. Value specified is in u4.8 format." line.long 0x34 "CEDGE_TH0_CAM0,Camera 0 BNR CEdge Threshold 0 Register" hexmask.long.tbyte 0x34 0.--19. 1. "EDGE_TH0,Edge Threshold 0: 20-bit lower threshold for blending coefficient calculation" line.long 0x38 "CEDGE_SCALE_CAM0,Camera 0 BNR CEdge Scale Register" hexmask.long.byte 0x38 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for blending factor determination" hexmask.long.word 0x38 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for blending factor determination" line.long 0x3C "CEDGES_TH0_CAM0,Camera 0 BNR Short CEdge Threshold 0 Register" hexmask.long.tbyte 0x3C 0.--19. 1. "EDGE_TH0,Edge Threshold 0: 20-bit lower threshold for blending coefficient calculation" line.long 0x40 "CEDGES_SCALE_CAM0,Camera 0 BNR Short CEdge Scale Register" hexmask.long.byte 0x40 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for blending factor determination" hexmask.long.word 0x40 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for blending factor determination" line.long 0x44 "CEDGEA_TH0_CAM0,Camera 0 BNR Alpha CEdge Threshold 0 Register" hexmask.long.tbyte 0x44 0.--19. 1. "EDGE_TH0,Edge Threshold 0: 20-bit lower threshold for blending coefficient calculation" line.long 0x48 "CEDGEA_SCALE_CAM0,Camera 0 BNR Alpha CEdge Scale Register" hexmask.long.byte 0x48 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for blending factor determination" hexmask.long.word 0x48 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for blending factor determination" line.long 0x4C "CLUMA_X_TH0_CAM0,Camera 0 BNR CLuma X Threshold 0 Register" hexmask.long.tbyte 0x4C 0.--19. 1. "TH,TH: 20-bit value for X threshold 0." line.long 0x50 "CLUMA_Y_TH_CAM0,Camera 0 BNR CLuma Y Threshold Register" hexmask.long.word 0x50 16.--25. 1. "LUMA_Y_TH1,LUMA_Y_TH1: 10-bit value for Y threshold 1." hexmask.long.word 0x50 0.--9. 1. "LUMA_Y_TH0,LUMA_Y_TH0: 10-bit value for Y threshold 0." line.long 0x54 "CLUMA_SCALE_CAM0,Camera 0 BNR CLuma Scale Register" hexmask.long.byte 0x54 16.--20. 1. "SHIFT,Shift: Provides the shift (right shift) factor for luma determination" hexmask.long.word 0x54 0.--15. 1. "SCALE,Scale: Provides the scaling (multiplication) factor for luma determination" line.long 0x58 "CALPHA_GAIN_CAM0,Camera 0 BNR CAlpha Gain Register" hexmask.long.word 0x58 16.--31. 1. "OFFSET,Offset: Provides the offset value (addition factor) for the gain'd alpha coefficient determined by BNR operation" hexmask.long.word 0x58 0.--15. 1. "GAIN,Gain: Provides the gain value (multiplication factor) for the alpha coefficient determined by BNR operation" rgroup.long 0x5C++0x7 line.long 0x0 "EDGE_STAT_CAM0,Camera 0BNR Edge Pixel Counter Status Register for L Threshold" hexmask.long.tbyte 0x0 0.--23. 1. "EDGE_PIXELS,EDGECNTL: Allows reading the total number of edge pixels that are above the L threshold." line.long 0x4 "EDGES_STAT_CAM0,Camera 0BNR Edge Pixel Counter Status Register for S Threshold" hexmask.long.tbyte 0x4 0.--23. 1. "EDGE_PIXELS,EDGE_PIXELS: Allows reading the total number of edge pixels that are above the S threshold." group.long 0x64++0x3 line.long 0x0 "STRETCH_CAM0,Camera 0 BNR Pixel Stretch (Gain) Register" hexmask.long.word 0x0 0.--15. 1. "GAIN,Gain: Provides the gain value (multiplication factor)" tree.end tree "CAS" base ad:0x4AE01500 group.long 0x4++0xB line.long 0x0 "GAIN_CAM0,Camera 0 CAS Gain Register" hexmask.long.byte 0x0 16.--23. 1. "SHIFT,Shift: Shift value for the suppression factor determination" hexmask.long.word 0x0 0.--15. 1. "SCALE,Scale: Scale factor for the suppression factor determination and specified unsigned format." line.long 0x4 "CORR_CAM0,Camera 0 CAS Correction Register" hexmask.long.word 0x4 0.--15. 1. "CORR,Correction: Minimum correction factor for dark pixels in u8" line.long 0x8 "OFFSET_CAM0,Camera 0 CAS Offset Register" hexmask.long.word 0x8 0.--15. 1. "OFFSET,Offset: Offset value for the suppression factor determination and specified in unsigned format." tree.end tree "CCONVMED" base ad:0x4AE014C0 group.long 0x0++0x3 line.long 0x0 "CTRL_CAM0,Camera 0 CCONVMED Control Register" bitfld.long 0x0 4.--5. "FLT,Filter type: This field controls the type of filtering to be executed." "0: Bypassed,1: Filter type is convolution (5x5 binomial),2: Filter type is median (5x5),?" tree.end tree "COLOR_TEMP" base ad:0x4AE00400 group.long 0x0++0x4B line.long 0x0 "CTRL_CAM0,Camera 0 COLORTEMP Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls the enabling or disabling of the COLORTEMP unit." "0: Disabled. The input pixels are left unchanged..,1: Enabled" bitfld.long 0x0 4. "CSCON,Color Space Correction ON: This field controls the COLORTEMP operation for the color space correction for input image" "0: No color space correction,1: Perform color space correction" bitfld.long 0x0 0.--1. "IBPP,IBPP: Indicates the size of pixel components coming into the COLORTEMP unit." "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" line.long 0x4 "ROI_POS_CAM0,Camera 0 COLORTEMP Region of Interest Position Register" hexmask.long.word 0x4 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI" hexmask.long.word 0x4 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI" line.long 0x8 "ROI_SIZE_CAM0,Camera 0 COLORTEMP Region of Interest Size Register" hexmask.long.word 0x8 16.--31. 1. "HEIGHT,Vertical height: This field provide the vertical height of the ROI" hexmask.long.word 0x8 0.--15. 1. "WIDTH,Horizontal width: This field provide the horizontal width of the ROI" line.long 0xC "REDGAIN_CAM0,Camera 0 COLORTEMP Red Gain Register" hexmask.long.byte 0xC 16.--23. 1. "MAX,Maximum gain: This field provide the maximum gain for the RED channel" hexmask.long.byte 0xC 0.--7. 1. "MIN,Minimum gain: This field provide the minimum gain for the RED channel" line.long 0x10 "BLUEGAIN_CAM0,Camera 0 COLORTEMP Blue Gain Register" hexmask.long.byte 0x10 16.--23. 1. "MAX,Maximum gain: This field provide the maximum gain for the BLUE channel" hexmask.long.byte 0x10 0.--7. 1. "MIN,Minimum gain: This field provide the minimum gain for the BLUE channel" line.long 0x14 "POINT1_CAM0,Camera 0 COLORTEMP Point1 Register" hexmask.long.byte 0x14 16.--23. 1. "RED,RED: Provides the point 1 value for RED/GREEN curve. Value specified is in u2.6 format." hexmask.long.byte 0x14 0.--7. 1. "BLUE,BLUE: Provides the point 1 value for BLUE/GREEN curve. Value specified is in u2.6 format." line.long 0x18 "POINT2_CAM0,Camera 0 COLORTEMP Point2 Register" hexmask.long.byte 0x18 16.--23. 1. "RED,RED: Provides the point 2 value for RED/GREEN curve. Value specified is in u2.6 format." hexmask.long.byte 0x18 0.--7. 1. "BLUE,BLUE: Provides the point 2 value for BLUE/GREEN curve. Value specified is in u2.6 format." line.long 0x1C "HOFFSET_CAM0,Camera 0 COLORTEMP Horizontal Offset Register" hexmask.long.byte 0x1C 16.--23. 1. "LEFT,LEFT: Provides the offset in decreasing horizontal indices. Value specified is in u2.6 format." hexmask.long.byte 0x1C 0.--7. 1. "RIGHT,RIGHT: Provides the offset in increasing horizontal indices. Value specified is in u2.6 format." line.long 0x20 "VOFFSET_CAM0,Camera 0 COLORTEMP Vertical Offset Register" hexmask.long.byte 0x20 16.--23. 1. "DOWN,DOWN: Provides the offset in decreasing vertical indices. Value specified is in u2.6 format." hexmask.long.byte 0x20 0.--7. 1. "UP,UP: Provides the offset in increasing vertical indices. Value specified is in u2.6 format." line.long 0x24 "POINT1_SLOPE_CAM0,Camera 0 COLORTEMP Point 1 Slope Register" hexmask.long.word 0x24 16.--31. 1. "SLOPE_R,SLOPE_R: Provides the RIGHT slope for point 1. Value specified is in s8.8 format." hexmask.long.word 0x24 0.--15. 1. "SLOPE_L,SLOPE_L: Provides the LEFT slope for point 1. Value specified is in s8.8 format." line.long 0x28 "POINT2_SLOPE_CAM0,Camera 0 COLORTEMP Point 2 Slope Register" hexmask.long.word 0x28 16.--31. 1. "SLOPE_R,SLOPE_R: Provides the RIGHT slope for point 2. Value specified is in s8.8 format." hexmask.long.word 0x28 0.--15. 1. "SLOPE_L,SLOPE_L: Provides the LEFT slope for point 2. Value specified is in s8.8 format." line.long 0x2C "LUMA_TH_CAM0,Camera 0 COLORTEMP Luma Threshold Register" hexmask.long.word 0x2C 16.--31. 1. "THH,High threshold: Provides the high threshold for luminance range check." hexmask.long.word 0x2C 0.--15. 1. "THL,Low threshold: Provides the low threshold for luminance range check." line.long 0x30 "CSC_MAT0_CAM0,Camera 0 COLORTEMP Color Space Correction Matrix 0 Register" hexmask.long.word 0x30 16.--31. 1. "R0C1,R0C1: Provides of the value of element at position (0 1) in the color space correction matrix." hexmask.long.word 0x30 0.--15. 1. "R0C0,R0C0: Provides of the value of element at position (0 0) in the color space correction matrix." line.long 0x34 "CSC_MAT1_CAM0,Camera 0 COLORTEMP Color Space Correction Matrix 1 Register" hexmask.long.word 0x34 16.--31. 1. "R1C0,R1C0: Provides of the value of element at position (1 0) in the color space correction matrix." hexmask.long.word 0x34 0.--15. 1. "R0C2,R0C2: Provides of the value of element at position (0 2) in the color space correction matrix." line.long 0x38 "CSC_MAT2_CAM0,Camera 0 COLORTEMP Color Space Correction Matrix 2 Register" hexmask.long.word 0x38 16.--31. 1. "R1C2,R1C2: Provides of the value of element at position (1 2) in the color space correction matrix." hexmask.long.word 0x38 0.--15. 1. "R1C1,R1C1: Provides of the value of element at position (1 1) in the color space correction matrix." line.long 0x3C "CSC_MAT3_CAM0,Camera 0 COLORTEMP Color Space Correction Matrix 3 Register" hexmask.long.word 0x3C 16.--31. 1. "R2C1,R2C1: Provides of the value of element at position (2 1) in the color space correction matrix." hexmask.long.word 0x3C 0.--15. 1. "R2C0,R2C0: Provides of the value of element at position (2 0) in the color space correction matrix." line.long 0x40 "CSC_MAT4_CAM0,Camera 0 COLORTEMP Color Space Correction Matrix 4 Register" hexmask.long.word 0x40 0.--15. 1. "R2C2,R2C2: Provides of the value of element at position (2 2) in the color space correction matrix." line.long 0x44 "R_GR_OFFSET_CAM0,Camera 0 COLORTEMP R Gr Offset Register" hexmask.long.word 0x44 16.--31. 1. "OFFSET1,Offset 1: Provides of the correction value of odd pixel position (pixel 1 3 5" hexmask.long.word 0x44 0.--15. 1. "OFFSET0,Offset 0: Provides of the correction value of even pixel position (pixel 0 2 4" line.long 0x48 "GB_B_OFFSET_CAM0,Camera 0 COLORTEMP Gb B Offset Register" hexmask.long.word 0x48 16.--31. 1. "OFFSET1,Offset 1: Provides of the correction value of odd pixel position (pixel 1 3 5" hexmask.long.word 0x48 0.--15. 1. "OFFSET0,Offset 0: Provides of the correction value of even pixel position (pixel 0 2 4" rgroup.long 0x4C++0x2B line.long 0x0 "CNT_WHITE_CAM0,Camera 0 COLORTEMP White Count Register" hexmask.long 0x0 0.--31. 1. "WHITE,White: Number of white pixels" line.long 0x4 "SUMRL_CAM0,Camera 0 COLORTEMP Red Sum Low Register" hexmask.long 0x4 0.--31. 1. "SUM,Sum: Lower 32-bits of accumulated RED channel pixel components values." line.long 0x8 "SUMRH_CAM0,Camera 0 COLORTEMP Red Sum High Register" hexmask.long 0x8 0.--31. 1. "SUM,Sum: Higher 32-bits of accumulated RED channel pixel components values." line.long 0xC "SUMGL_CAM0,Camera 0 COLORTEMP Green Sum Low Register" hexmask.long 0xC 0.--31. 1. "SUM,Sum: Lower 32-bits of accumulated GREEN channel pixel components values." line.long 0x10 "SUMGH_CAM0,Camera 0 COLORTEMP Green Sum High Register" hexmask.long 0x10 0.--31. 1. "SUM,Sum: Higher 32-bits of accumulated GREEN channel pixel components values." line.long 0x14 "SUMBL_CAM0,Camera 0 COLORTEMP Blue Sum Low Register" hexmask.long 0x14 0.--31. 1. "SUM,Sum: Lower 32-bits of accumulated BLUE channel pixel components values." line.long 0x18 "SUMBH_CAM0,Camera 0 COLORTEMP Blue Sum High Register" hexmask.long 0x18 0.--31. 1. "SUM,Sum: Higher 32-bits of accumulated BLUE channel pixel components values." line.long 0x1C "SUMRGL_CAM0,Camera 0 COLORTEMP R/G Sum Low Register" hexmask.long 0x1C 0.--31. 1. "SUM,Sum: Lower 32-bits of accumulated R/G gain." line.long 0x20 "SUMRGH_CAM0,Camera 0 COLORTEMP R/G Sum High Register" hexmask.long 0x20 0.--31. 1. "SUM,Sum: Higher 32-bits of accumulated RED/GREEN gain." line.long 0x24 "SUMBGL_CAM0,Camera 0 COLORTEMP B/G Sum Low Register" hexmask.long 0x24 0.--31. 1. "SUM,Sum: Lower 32-bits of accumulated B/G gain." line.long 0x28 "SUMBGH_CAM0,Camera 0 COLORTEMP B/G Sum High Register" hexmask.long 0x28 0.--31. 1. "SUM,Sum: Higher 32-bits of accumulated BLUE/GREEN gain." group.long 0x80++0x3 line.long 0x0 "STAT_BLK_SIZE0,Camera 0 COLORTEMP Statistics Block Size Register" hexmask.long.word 0x0 16.--31. 1. "YSIZE,Lines per block: Number of image lines per block. Should always be multiple of 2." hexmask.long.word 0x0 0.--15. 1. "XSIZE,Pixels per block: Number of pixels per block. Should always be multiple of 2." rgroup.long 0x88++0x3 line.long 0x0 "STAT_CURR_BLK_Y0,Camera 0 COLORTEMP Statistics Block Y Status" bitfld.long 0x0 16.--18. "BLKROW,Current block row: Maximum number of 8 block rows." "0,1,2,3,4,5,6,7" hexmask.long.word 0x0 0.--15. 1. "BLKLNE,Current block line index: Index of current line inside block" group.long 0x90++0x3 line.long 0x0 "CROI0_POS_CAM0,Camera 0 Color ROI 0 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0x98++0xF line.long 0x0 "CROI0_PIXCNT_CAM0,Camera 0 Color ROI 0 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI0_SUMRED_CAM0,Camera 0 Color ROI 0 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI0_SUMGREEN_CAM0,Camera 0 Color ROI 0 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI0_SUMBLUE_CAM0,Camera 0 Color ROI 0 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0xA8++0x3 line.long 0x0 "CROI1_POS_CAM0,Camera 0 Color ROI 1 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0xB0++0xF line.long 0x0 "CROI1_PIXCNT_CAM0,Camera 0 Color ROI 1 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI1_SUMRED_CAM0,Camera 0 Color ROI 1 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI1_SUMGREEN_CAM0,Camera 0 Color ROI 1 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI1_SUMBLUE_CAM0,Camera 0 Color ROI 1 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0xC0++0x3 line.long 0x0 "CROI2_POS_CAM0,Camera 0 Color ROI 2 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0xC8++0xF line.long 0x0 "CROI2_PIXCNT_CAM0,Camera 0 Color ROI 2 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI2_SUMRED_CAM0,Camera 0 Color ROI 2 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI2_SUMGREEN_CAM0,Camera 0 Color ROI 2 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI2_SUMBLUE_CAM0,Camera 0 Color ROI 2 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0xD8++0x3 line.long 0x0 "CROI3_POS_CAM0,Camera 0 Color ROI 3 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0xE0++0xF line.long 0x0 "CROI3_PIXCNT_CAM0,Camera 0 Color ROI 3 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI3_SUMRED_CAM0,Camera 0 Color ROI 3 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI3_SUMGREEN_CAM0,Camera 0 Color ROI 3 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI3_SUMBLUE_CAM0,Camera 0 Color ROI 3 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0xF0++0x3 line.long 0x0 "CROI4_POS_CAM0,Camera 0 Color ROI 4 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0xF8++0xF line.long 0x0 "CROI4_PIXCNT_CAM0,Camera 0 Color ROI 4 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI4_SUMRED_CAM0,Camera 0 Color ROI 4 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI4_SUMGREEN_CAM0,Camera 0 Color ROI 4 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI4_SUMBLUE_CAM0,Camera 0 Color ROI 4 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0x108++0x3 line.long 0x0 "CROI5_POS_CAM0,Camera 0 Color ROI 5 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0x110++0xF line.long 0x0 "CROI5_PIXCNT_CAM0,Camera 0 Color ROI 5 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI5_SUMRED_CAM0,Camera 0 Color ROI 5 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI5_SUMGREEN_CAM0,Camera 0 Color ROI 5 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI5_SUMBLUE_CAM0,Camera 0 Color ROI 5 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0x120++0x3 line.long 0x0 "CROI6_POS_CAM0,Camera 0 Color ROI 6 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0x128++0xF line.long 0x0 "CROI6_PIXCNT_CAM0,Camera 0 Color ROI 6 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI6_SUMRED_CAM0,Camera 0 Color ROI 6 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI6_SUMGREEN_CAM0,Camera 0 Color ROI 6 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI6_SUMBLUE_CAM0,Camera 0 Color ROI 6 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0x138++0x3 line.long 0x0 "CROI7_POS_CAM0,Camera 0 Color ROI 7 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0x140++0xF line.long 0x0 "CROI7_PIXCNT_CAM0,Camera 0 Color ROI 7 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI7_SUMRED_CAM0,Camera 0 Color ROI 7 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI7_SUMGREEN_CAM0,Camera 0 Color ROI 7 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI7_SUMBLUE_CAM0,Camera 0 Color ROI 7 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0x150++0x3 line.long 0x0 "CROI8_POS_CAM0,Camera 0 Color ROI 8 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0x158++0xF line.long 0x0 "CROI8_PIXCNT_CAM0,Camera 0 Color ROI 8 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI8_SUMRED_CAM0,Camera 0 Color ROI 8 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI8_SUMGREEN_CAM0,Camera 0 Color ROI 8 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI8_SUMBLUE_CAM0,Camera 0 Color ROI 8 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0x168++0x3 line.long 0x0 "CROI9_POS_CAM0,Camera 0 Color ROI 9 Position Register" hexmask.long.byte 0x0 24.--31. 1. "BOVERG_HIGH,High value of B/G: Higher value of B/G" hexmask.long.byte 0x0 16.--23. 1. "BOVERG_LOW,Low value of B/G: Lower value of B/G" hexmask.long.byte 0x0 8.--15. 1. "ROVERG_HIGH,High value of R/G: Higher value of R/G" newline hexmask.long.byte 0x0 0.--7. 1. "ROVERG_LOW,Low value of R/G: Lower value of R/G" rgroup.long 0x170++0xF line.long 0x0 "CROI9_PIXCNT_CAM0,Camera 0 Color ROI 9 Pixel Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "PIXCNT,Pixel count: Count saturates once it reaches all 1s." line.long 0x4 "CROI9_SUMRED_CAM0,Camera 0 Color ROI 9 SUM Red Register" hexmask.long 0x4 0.--31. 1. "SUM,Accumulated RED value: For each of the white pixel in corresponding ROI" line.long 0x8 "CROI9_SUMGREEN_CAM0,Camera 0 Color ROI 9 SUM Green Register" hexmask.long 0x8 0.--31. 1. "SUM,Accumulated GREEN value: For each of the white pixel in corresponding ROI" line.long 0xC "CROI9_SUMBLUE_CAM0,Camera 0 Color ROI 9 SUM Blue Register" hexmask.long 0xC 0.--31. 1. "SUM,Accumulated BLUE value: For each of the white pixel in corresponding ROI" group.long 0x184++0x7 line.long 0x0 "GR_AVG_IN_CAM0,Camera 0 GR average input value" hexmask.long.tbyte 0x0 0.--19. 1. "GR_AGV,Input average value: This value gets subtracted from the GR values before accumulation into the GR vs" line.long 0x4 "GB_AVG_IN_CAM0,Camera 0 GB average input value" hexmask.long.tbyte 0x4 0.--19. 1. "GB_AGV,Input average value: This value gets subtracted from the GB values before accumulation into the GR vs" rgroup.long 0x18C++0x17 line.long 0x0 "GR_GB_CNT_CAM0,Camera 0 Pixel count for the GR vs GB sums" hexmask.long 0x0 0.--31. 1. "CNT,Pixel Count: Returns the number of counted pixels in the GR vs GB sums" line.long 0x4 "GR_SUM_CAM0,Camera 0 Sum of counted GR values" hexmask.long 0x4 0.--31. 1. "SUM,Pixel Sum: Sum(GR-GR_AVG). The sum has 27 bits mantissa (bit[31:5]) and 5 bits exponent (bit[4:0])." line.long 0x8 "GB_SUM_CAM0,Camera 0 Sum of counted GB values" hexmask.long 0x8 0.--31. 1. "SUM,Pixel Sum: Sum(GB-GB_AVG). The sum has 27 bits mantissa (bit[31:5]) and 5 bits exponent (bit[4:0])." line.long 0xC "GR2_SUM_CAM0,Camera 0 Sum of squared GR values" hexmask.long 0xC 0.--31. 1. "SUM,Squared Sum: Sum((GR-GR_AVG)*(GR-GR_AVG))" line.long 0x10 "GB2_SUM_CAM0,Camera 0 Sum of squared GB values" hexmask.long 0x10 0.--31. 1. "SUM,Squared Sum: Sum((GB-GB_AVG)*(GB-GB_AVG))" line.long 0x14 "GRGB_SUM_CAM0,Camera 0 Sum of GR*GB values" hexmask.long 0x14 0.--31. 1. "SUM,GRGB Sum: Sum((GR-GR_AVG)*(GB-GB_AVG))" tree.end tree "DEMOSAIC" base ad:0x4AE01180 group.long 0x0++0xF line.long 0x0 "CTRL_CAM0,Camera 0 Demosaic Control Register" bitfld.long 0x0 4.--5. "FMT,Format: This field provide the format of the input image of the demosaic." "0: Input image is RGGB bayer image,1: Input image is RCCC image,2: Input image is Monochrome image,?" line.long 0x4 "ACTIVITY_CTL_CAM0,Camera 0 Demosaic Activity Control Register" hexmask.long.word 0x4 16.--31. 1. "ACT_RATIO,Ratio from minimum activity to activity of direction for selecting the respective green value of that direction for interpolation." hexmask.long.word 0x4 0.--8. 1. "ALPHA,Blending factor between block (0) and color (256) activity." line.long 0x8 "DYNAMICS_CTL0_CAM0,Camera 0 Demosaic Dynamics Control 0 Register" hexmask.long.word 0x8 16.--31. 1. "STRENGTHC,Feedback strength for color (red or blue) pixel interpolation: The value is in u8.8 format." hexmask.long.word 0x8 0.--15. 1. "STRENGTHG,Feedback strength for green pixel interpolation: The value is in u8.8 format." line.long 0xC "DYNAMICS_CTL2_CAM0,Camera 0 Demosaic Dynamics Control 2 Register" hexmask.long.word 0xC 0.--15. 1. "MAX_IMPACT,Maximum feedback impact of the dynamics on the interpolated values The value is in u8.8 format." tree.end tree "DF" base ad:0x4AE01440 group.long 0x0++0xF line.long 0x0 "CTRL_CAM0,Camera 0 DF Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls if the direction filter is turned on" "0: off,1: on" bitfld.long 0x0 8.--10. "DEBUG,Debug / Tuning view" "0: off,1: filtered+texture,2: filtered+white,3: horizontal filtered + white,4: vertical filtered + white,5: diagonal1 filtered + white,6: diagonal2 filtered + white,?" line.long 0x4 "TH_SCALE_CAM0,Camera 0 DF Blending Scale Register" hexmask.long.tbyte 0x4 0.--19. 1. "SCALE,Scale: Scale factor for the blending factor determination" line.long 0x8 "BLEND_SHIFT_CAM0,Camera 0 DF Blending Shift Register" hexmask.long.byte 0x8 0.--5. 1. "SHIFT,Shift: Shift factor for the blending factor determination" line.long 0xC "BLEND_TH0_CAM0,Camera 0 DF Blend Threshold 0 Register" hexmask.long.tbyte 0xC 0.--19. 1. "TH,Threshold 0: Provides threshold 0 value for determining the blending factor" rgroup.long 0x10++0x3 line.long 0x0 "EDGECNT_CAM0,Camera 0 DF Edge Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "EDGE_PIXELS,EdgeCnt: Provides the number of edge pixels for the given blending settings and the image" tree.end tree "DRC" base ad:0x4AE01300 group.long 0x0++0x17 line.long 0x0 "ROI0_POS_CAM0,Camera 0 DRC Region of Interest 0 Position Register" hexmask.long.word 0x0 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI0." hexmask.long.word 0x0 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI0." line.long 0x4 "ROI0_SIZE_CAM0,Camera 0 DRC Region of Interest 0 Size Register" hexmask.long.word 0x4 16.--31. 1. "HEIGHT,Vertical height: Provide the vertical height of the ROI0." hexmask.long.word 0x4 0.--15. 1. "WIDTH,Horizontal width: Provide the horizontal width of the ROI0." line.long 0x8 "ROI1_POS_CAM0,Camera 0 DRC Region of Interest 1 Position Register" hexmask.long.word 0x8 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI1." hexmask.long.word 0x8 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI1." line.long 0xC "ROI1_SIZE_CAM0,Camera 0 DRC Region of Interest 1 Size Register" hexmask.long.word 0xC 16.--31. 1. "HEIGHT,Vertical height: Provides the vertical height of the ROI1." hexmask.long.word 0xC 0.--15. 1. "WIDTH,Horizontal width: Provides the horizontal width of the ROI1." line.long 0x10 "GROI_SUM_SHIFT_CAM0,Camera 0 DRC Global ROI 0.1 Sum Shift Register" hexmask.long.byte 0x10 16.--20. 1. "SHIFT1,GROI1 Sum Shift Value: Provides shift value for GROI1 SUM" hexmask.long.byte 0x10 0.--4. 1. "SHIFT0,GROI0 Sum Shift Value: Provides shift value for GROI0 SUM" line.long 0x14 "GBL_GAIN_CAM0,Camera 0 DRC Global Gain Register" hexmask.long.word 0x14 0.--15. 1. "GAIN,Gain: Provides a gain for the global DRC in unsigned 8" group.long 0x20++0x17 line.long 0x0 "LCL_BLK_SIZE_CAM0,Camera 0 DRC Local Block Size Register" hexmask.long.word 0x0 16.--31. 1. "YSIZE,Y Size: Provides number of rows per block." hexmask.long.word 0x0 0.--15. 1. "XSIZE,X Size: Provides number of pixels per block." line.long 0x4 "LCL_STRETCH_CAM0,Camera 0 DRC Local Stretch and Offset Register" hexmask.long.word 0x4 16.--31. 1. "OFFSET,Offset: Black level value before applying gamma" hexmask.long.word 0x4 0.--15. 1. "STRETCH,Stretch value: Provides local DRC stretch value of the input before applying gamma" line.long 0x8 "LCL_BLK_STEPY_CAM0,Camera 0 DRC Local Block Y Step Register" hexmask.long.word 0x8 0.--15. 1. "STEP,Y Step: Vertical scaling factor specified in u0.16 format." line.long 0xC "LCL_BLK_STEPX_CAM0,Camera 0 DRC Local Block X Step Register" hexmask.long.word 0xC 0.--15. 1. "STEP,X Step: Horizontal scaling factor specified in u0.16 format." line.long 0x10 "LCL_SUM_SHIFT_CAM0,Camera 0 DRC Local Sum Shift Register" hexmask.long.byte 0x10 0.--4. 1. "SHIFT,Local Sum Shift Value: Provides shift value for building the local DRC's 32x32 SUMs" line.long 0x14 "ALPHA_CAM0,Camera 0 DRC Alpha Blending Register" hexmask.long.word 0x14 0.--8. 1. "ALPHA,Blending factor: Alpha value for blending step between global and local DRC" rgroup.long 0x40++0x7 line.long 0x0 "GROI0_SUM_CAM0,Camera 0 DRC Global ROI0 Sum Register" hexmask.long 0x0 0.--31. 1. "VAL,Value: Provides the 32-bits of ROI0 sum." line.long 0x4 "GROI1_SUM_CAM0,Camera 0 DRC Global ROI1 Sum Register" hexmask.long 0x4 0.--31. 1. "VAL,Value: Provides the 32-bits of ROI1 sum." rgroup.long 0x50++0x7 line.long 0x0 "STAT_BLK_Y_CAM0,Camera 0 DRC Current Local Block Y Status" hexmask.long.byte 0x0 16.--23. 1. "BLKROW,Current block row: Maximum number of 32 block rows." hexmask.long.word 0x0 0.--15. 1. "BLKLNE,Current block line index: Index of current line inside block" line.long 0x4 "CURR_YFRACT_CAM0,Camera 0 DRC Current Local Block Y Fraction" hexmask.long 0x4 0.--31. 1. "FRACT,Current block line fraction: Fractional part for interpolation in Y direction of the current line" tree.end tree "EE" base ad:0x4AE01480 group.long 0x0++0xF line.long 0x0 "CTRL_CAM0,Camera 0 EE Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls if the edge enhancement is turned on" "0: off,1: on" bitfld.long 0x0 8.--9. "DEBUG,Debug / Tuning view" "0: off,1: filtered as normal texture,2: filtered as black,?" line.long 0x4 "CORING_CAM0,Camera 0 EE Coring Register" hexmask.long.tbyte 0x4 0.--19. 1. "CORING,Coring: Coring value for the mask factor determination" line.long 0x8 "CLIP_CAM0,Camera 0 EE Clip Register" hexmask.long.tbyte 0x8 0.--19. 1. "CLIP,Clip: Clip value for the mask factor determination" line.long 0xC "MASKGAIN_CAM0,Camera 0 EE Mask Gain Register" hexmask.long.byte 0xC 0.--7. 1. "GAIN,Gain: Gain value for the HPF factor determination. Value specified is in u4.4 format." rgroup.long 0x10++0x3 line.long 0x0 "EDGECNT_CAM0,Camera 0 EE Edge Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "EDGE_PIXELS,EdgeCnt: Provides the number of edge pixels for the given blending settings and the image" tree.end tree "GCM" base ad:0x4AE01600 group.long 0x0++0x7 line.long 0x0 "IMAT0_CAM0,Camera 0 GCM Input Matrix 0 Register" hexmask.long.word 0x0 16.--31. 1. "R0C1,Value: Provides the value of the element at position (0 1) in the input Gamma correction matrix" hexmask.long.word 0x0 0.--15. 1. "R0C0,Value: Provides the value of the element at position (0 0) in the input Gamma correction matrix" line.long 0x4 "IMAT1_CAM0,Camera 0 GCM Input Matrix 1 Register" hexmask.long.word 0x4 0.--15. 1. "R0C2,Value: Provides the value of the element at position (0 2) in the input Gamma correction matrix" group.long 0xC++0x7 line.long 0x0 "IMAT2_CAM0,Camera 0 GCM Input Matrix 2 Register" hexmask.long.word 0x0 16.--31. 1. "R1C1,Value: Provides the value of the element at position (1 1) in the input Gamma correction matrix" hexmask.long.word 0x0 0.--15. 1. "R1C0,Value: Provides the value of the element at position (1 0) in the input Gamma correction matrix" line.long 0x4 "IMAT3_CAM0,Camera 0 GCM Input Matrix 3 Register" hexmask.long.word 0x4 0.--15. 1. "R1C2,Value: Provides the value of the element at position (1 2) in the input Gamma correction matrix" group.long 0x18++0x13 line.long 0x0 "IMAT4_CAM0,Camera 0 GCM Input Matrix 4 Register" hexmask.long.word 0x0 16.--31. 1. "R2C1,Value: Provides the value of the element at position (2 1) in the input Gamma correction matrix" hexmask.long.word 0x0 0.--15. 1. "R2C0,Value: Provides the value of the element at position (2 0) in the input Gamma correction matrix" line.long 0x4 "IMAT5_CAM0,Camera 0 GCM Input Matrix 5 Register" hexmask.long.word 0x4 0.--15. 1. "R2C2,Value: Provides the value of the element at position (2 2) in the input Gamma correction matrix" line.long 0x8 "IOFFSET0_CAM0,Camera 0 GCM Input Offset0 Register" hexmask.long.word 0x8 0.--15. 1. "OFFSET0,Offset0: Provides the offset value for input channel 0" line.long 0xC "IOFFSET1_CAM0,Camera 0 GCM Input Offset1 Register" hexmask.long.word 0xC 0.--15. 1. "OFFSET1,Offset1: Provides the offset value for input channel 1" line.long 0x10 "IOFFSET2_CAM0,Camera 0 GCM Input Offset2 Register" hexmask.long.word 0x10 0.--15. 1. "OFFSET2,Offset2: Provides the offset value for input channel 2" group.long 0x30++0x23 line.long 0x0 "OMAT0_CAM0,Camera 0 GCM Output Matrix 0 Register" hexmask.long.word 0x0 16.--31. 1. "R0C1,Value: Provides the value of the element at position (0 1) in the output Gamma correction matrix" hexmask.long.word 0x0 0.--15. 1. "R0C0,Value: Provides the value of the element at position (0 0) in the output Gamma correction matrix" line.long 0x4 "OMAT1_CAM0,Camera 0 GCM Output Matrix 1 Register" hexmask.long.word 0x4 0.--15. 1. "R0C2,Value: Provides the value of the element at position (0 2) in the output Gamma correction matrix" line.long 0x8 "OMAT2_CAM0,Camera 0 GCM Output Matrix 2 Register" hexmask.long.word 0x8 16.--31. 1. "R1C1,Value: Provides the value of the element at position (1 1) in the output Gamma correction matrix" hexmask.long.word 0x8 0.--15. 1. "R1C0,Value: Provides the value of the element at position (1 0) in the output Gamma correction matrix" line.long 0xC "OMAT3_CAM0,Camera 0 GCM Output Matrix 3 Register" hexmask.long.word 0xC 0.--15. 1. "R1C2,Value: Provides the value of the element at position (1 2) in the output Gamma correction matrix" line.long 0x10 "OMAT4_CAM0,Camera 0 GCM Output Matrix 4 Register" hexmask.long.word 0x10 16.--31. 1. "R2C1,Value: Provides the value of the element at position (2 1) in the output Gamma correction matrix." hexmask.long.word 0x10 0.--15. 1. "R2C0,Value: Provides the value of the element at position (2 0) in the output Gamma correction matrix." line.long 0x14 "OMAT5_CAM0,Camera 0 GCM Output Matrix 5 Register" hexmask.long.word 0x14 0.--15. 1. "R2C2,Value: Provides the value of the element at position (2 2) in the output Gamma correction matrix." line.long 0x18 "OOFFSET0_CAM0,Camera 0 GCM Output Offset 0 Register" hexmask.long.word 0x18 0.--12. 1. "OFFSET0,Value: Provides the offset value for output channel 0 of the output Gamma correction matrix" line.long 0x1C "OOFFSET1_CAM0,Camera 0 GCM Output Offset 1 Register" hexmask.long.word 0x1C 0.--12. 1. "OFFSET1,Value: Provides the offset value for output channel 1 of the output Gamma correction matrix" line.long 0x20 "OOFFSET2_CAM0,Camera 0 GCM Output Offset 2 Register" hexmask.long.word 0x20 0.--12. 1. "OFFSET2,Value: Provides the offset value for output channel 2 of the output Gamma correction matrix" group.long 0x60++0x23 line.long 0x0 "GAMMA0_CAM0,Camera 0 GCM Gamma 0 Register" hexmask.long.word 0x0 16.--27. 1. "OFFSET0,Value: Provides the offset value." hexmask.long.word 0x0 0.--8. 1. "GAMMA0,Gamma0: Provides the gamma value. Value specified is in unsigned(u1.8) format." line.long 0x4 "GAMMA1_CAM0,Camera 0 GCM Gamma 1 Register" hexmask.long.word 0x4 16.--27. 1. "OFFSET1,Value: Provides the offset value." hexmask.long.word 0x4 0.--8. 1. "GAMMA1,Gamma1: Provides the gamma value. Value specified is in unsigned(u1.8) format." line.long 0x8 "GAMMA2_CAM0,Camera 0 GCM Gamma 2 Register" hexmask.long.word 0x8 16.--27. 1. "OFFSET2,Value: Provides the offset value." hexmask.long.word 0x8 0.--8. 1. "GAMMA2,Gamma2: Provides the gamma value. Value specified is in unsigned(u1.8) format." line.long 0xC "BLKLVL0_CTRL_CAM0,Camera 0 Linear 0 Control" hexmask.long.word 0xC 16.--31. 1. "GAIN0,Gain: Gain value for the linear part of the gamma curve" hexmask.long.word 0xC 0.--15. 1. "OFFSET0,Offset: blacklevel value to be subtracted before applying the gain or gamma." line.long 0x10 "BLKLVL1_CTRL_CAM0,Camera 0 Linear 1 Control" hexmask.long.word 0x10 16.--31. 1. "GAIN1,Gain: Gain value for the linear part of the gamma curve" hexmask.long.word 0x10 0.--15. 1. "OFFSET1,Offset: blacklevel value to be subtracted before applying the gain or gamma." line.long 0x14 "BLKLVL2_CTRL_CAM0,Camera 0 Linear 1 Control" hexmask.long.word 0x14 16.--31. 1. "GAIN2,Gain: Gain value for the linear part of the gamma curve" hexmask.long.word 0x14 0.--15. 1. "OFFSET2,Offset: blacklevel value to be subtracted before applying the gain or gamma." line.long 0x18 "LOWTH_CTRL01_CAM0,Camera 0 Linear Threshold channel 0 and 1" hexmask.long.word 0x18 16.--31. 1. "THRESHOLD1,Threshold1: input values of channel 1 less or equal than the threshold are processed using the linear low area function" hexmask.long.word 0x18 0.--15. 1. "THRESHOLD0,Threshold0: input values of channel 0 less or equal than the threshold are processed using the linear low area function" line.long 0x1C "LOWTH_CTRL2_CAM0,Camera 0 Threshold channel 2" hexmask.long.word 0x1C 0.--15. 1. "THRESHOLD2,Threshold0: input values of channel 2 less or equal than the threshold are processed using the linear low area function" line.long 0x20 "MAT_CONFG_CAM0,Camera 0 GCM Configuration Register" bitfld.long 0x20 0. "SIGN_CONFG,Sign Confg: Provides the sign configuration for the GCM unit output pixels channel 1 and 2." "0: Signed,1: Unsigned" tree.end tree "HC" base ad:0x4AE000C0 group.long 0x0++0x3 line.long 0x0 "CTRL_CAM0,Camera 0 Head Color Control Register" bitfld.long 0x0 2.--3. "VOFFSET,Vertical Head Line offset: Provides offset in terms of no. of lines" "0: RED component line is at 0 th image line.,1: RED component line is at 1 st image line.,2: RED component line is at 2 nd image line.,3: RED component line is at 3 rd image line." bitfld.long 0x0 0.--1. "HOFFSET,Horizontal Head Pixel offset: Provides offset in terms of no. of pixels" "0: RED component is at 0 th pixel position.,1: RED component is at 1 st pixel position.,2: RED component is at 2 nd pixel position.,3: RED component is at 3 rd pixel position." tree.end tree "HDR_DECOMPRESS" tree "HDR_DECOMPRESS0" base ad:0x4AE00100 group.long 0x0++0x47 line.long 0x0 "CTRL_CAM0,Camera 0 HDR Decompress Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls the HDR decompression unit" "0: HDR decompression operation is disabled. The..,1: HDR decompression operation is enabled." line.long 0x4 "KNEE_POINT1_CAM0,Camera 0 HDR Decompress KneePoint 1 Register" hexmask.long.word 0x4 0.--15. 1. "KNEEPOINT,Knee point: Knee point 1" line.long 0x8 "KNEE_POINT2_CAM0,Camera 0 HDR Decompress KneePoint 2 Register" hexmask.long.word 0x8 0.--15. 1. "KNEEPOINT,Knee point: Knee point 2" line.long 0xC "KNEE_POINT3_CAM0,Camera 0 HDR Decompress KneePoint 3 Register" hexmask.long.word 0xC 0.--15. 1. "KNEEPOINT,Knee point: Knee point 3" line.long 0x10 "KNEE_POINT4_CAM0,Camera 0 HDR Decompress KneePoint 4 Register" hexmask.long.word 0x10 0.--15. 1. "KNEEPOINT,Knee point: Knee point 4" line.long 0x14 "KNEE_OFFSET0_CAM0,Camera 0 HDR Decompress Knee Offset 0 Register" hexmask.long.word 0x14 0.--15. 1. "OFFSET,Knee offset: Knee offset 0" line.long 0x18 "KNEE_OFFSET1_CAM0,Camera 0 HDR Decompress Knee Offset 1 Register" hexmask.long.word 0x18 0.--15. 1. "OFFSET,Knee offset: Knee offset 1" line.long 0x1C "KNEE_OFFSET2_CAM0,Camera 0 HDR Decompress Knee Offset 2] Register" hexmask.long.word 0x1C 0.--15. 1. "OFFSET,Knee offset: Knee offset 2" line.long 0x20 "KNEE_OFFSET3_CAM0,Camera 0 HDR Decompress Knee Offset 3 Register" hexmask.long.word 0x20 0.--15. 1. "OFFSET,Knee offset: Knee offset 3" line.long 0x24 "KNEE_OFFSET4_CAM0,Camera 0 HDR Decompress Knee Offset 4 Register" hexmask.long.word 0x24 0.--15. 1. "OFFSET,Knee offset: Knee offset 4" line.long 0x28 "KNEE_RATIO01_CAM0,Camera 0 HDR Decompress Knee Ratio 01 Register" hexmask.long.word 0x28 16.--27. 1. "RATIO1,Knee ratio: Knee ratio 1. This value is in u7.5." hexmask.long.word 0x28 0.--11. 1. "RATIO0,Knee ratio: Knee ratio 0. This value is in u7.5." line.long 0x2C "KNEE_RATIO23_CAM0,Camera 0 HDR Decompress Knee Ratio 23 Register" hexmask.long.word 0x2C 16.--27. 1. "RATIO3,Knee ratio: Knee ratio 3. This value is in u7.5." hexmask.long.word 0x2C 0.--11. 1. "RATIO2,Knee ratio: Knee ratio 2. This value is in u7.5." line.long 0x30 "KNEE_RATIO4_CAM0,Camera 0 HDR Decompress Knee Ratio 4 Register" hexmask.long.word 0x30 0.--11. 1. "RATIO4,Knee ratio: Knee ratio 4. This value is in u7.5." line.long 0x34 "KNEE_NPOINT0_CAM0,Camera 0 HDR Decompress New KneePoint 0 Register" hexmask.long.tbyte 0x34 0.--19. 1. "KNEEPOINT,Knee point: Knee point 0" line.long 0x38 "KNEE_NPOINT1_CAM0,Camera 0 HDR Decompress New KneePoint 1 Register" hexmask.long.tbyte 0x38 0.--19. 1. "KNEEPOINT,Knee point: Knee point 1" line.long 0x3C "KNEE_NPOINT2_CAM0,Camera 0 HDR Decompress New KneePoint 2 Register" hexmask.long.tbyte 0x3C 0.--19. 1. "KNEEPOINT,Knee point: Knee point 2" line.long 0x40 "KNEE_NPOINT3_CAM0,Camera 0 HDR Decompress New KneePoint 3 Register" hexmask.long.tbyte 0x40 0.--19. 1. "KNEEPOINT,Knee point: Knee point 3" line.long 0x44 "KNEE_NPOINT4_CAM0,Camera 0 HDR Decompress New KneePoint 4 Register" hexmask.long.tbyte 0x44 0.--19. 1. "KNEEPOINT,Knee point: Knee point 4" tree.end tree "HDR_DECOMPRESS1" base ad:0x4AE00180 group.long 0x0++0x47 line.long 0x0 "CTRL_CAM0,Camera 0 HDR Decompress Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls the HDR decompression unit" "0: HDR decompression operation is disabled. The..,1: HDR decompression operation is enabled." line.long 0x4 "KNEE_POINT1_CAM0,Camera 0 HDR Decompress KneePoint 1 Register" hexmask.long.word 0x4 0.--15. 1. "KNEEPOINT,Knee point: Knee point 1" line.long 0x8 "KNEE_POINT2_CAM0,Camera 0 HDR Decompress KneePoint 2 Register" hexmask.long.word 0x8 0.--15. 1. "KNEEPOINT,Knee point: Knee point 2" line.long 0xC "KNEE_POINT3_CAM0,Camera 0 HDR Decompress KneePoint 3 Register" hexmask.long.word 0xC 0.--15. 1. "KNEEPOINT,Knee point: Knee point 3" line.long 0x10 "KNEE_POINT4_CAM0,Camera 0 HDR Decompress KneePoint 4 Register" hexmask.long.word 0x10 0.--15. 1. "KNEEPOINT,Knee point: Knee point 4" line.long 0x14 "KNEE_OFFSET0_CAM0,Camera 0 HDR Decompress Knee Offset 0 Register" hexmask.long.word 0x14 0.--15. 1. "OFFSET,Knee offset: Knee offset 0" line.long 0x18 "KNEE_OFFSET1_CAM0,Camera 0 HDR Decompress Knee Offset 1 Register" hexmask.long.word 0x18 0.--15. 1. "OFFSET,Knee offset: Knee offset 1" line.long 0x1C "KNEE_OFFSET2_CAM0,Camera 0 HDR Decompress Knee Offset 2] Register" hexmask.long.word 0x1C 0.--15. 1. "OFFSET,Knee offset: Knee offset 2" line.long 0x20 "KNEE_OFFSET3_CAM0,Camera 0 HDR Decompress Knee Offset 3 Register" hexmask.long.word 0x20 0.--15. 1. "OFFSET,Knee offset: Knee offset 3" line.long 0x24 "KNEE_OFFSET4_CAM0,Camera 0 HDR Decompress Knee Offset 4 Register" hexmask.long.word 0x24 0.--15. 1. "OFFSET,Knee offset: Knee offset 4" line.long 0x28 "KNEE_RATIO01_CAM0,Camera 0 HDR Decompress Knee Ratio 01 Register" hexmask.long.word 0x28 16.--27. 1. "RATIO1,Knee ratio: Knee ratio 1. This value is in u7.5." hexmask.long.word 0x28 0.--11. 1. "RATIO0,Knee ratio: Knee ratio 0. This value is in u7.5." line.long 0x2C "KNEE_RATIO23_CAM0,Camera 0 HDR Decompress Knee Ratio 23 Register" hexmask.long.word 0x2C 16.--27. 1. "RATIO3,Knee ratio: Knee ratio 3. This value is in u7.5." hexmask.long.word 0x2C 0.--11. 1. "RATIO2,Knee ratio: Knee ratio 2. This value is in u7.5." line.long 0x30 "KNEE_RATIO4_CAM0,Camera 0 HDR Decompress Knee Ratio 4 Register" hexmask.long.word 0x30 0.--11. 1. "RATIO4,Knee ratio: Knee ratio 4. This value is in u7.5." line.long 0x34 "KNEE_NPOINT0_CAM0,Camera 0 HDR Decompress New KneePoint 0 Register" hexmask.long.word 0x34 0.--15. 1. "KNEEPOINT,Knee point: Knee point 0" line.long 0x38 "KNEE_NPOINT1_CAM0,Camera 0 HDR Decompress New KneePoint 1 Register" hexmask.long.word 0x38 0.--15. 1. "KNEEPOINT,Knee point: Knee point 1" line.long 0x3C "KNEE_NPOINT2_CAM0,Camera 0 HDR Decompress New KneePoint 2 Register" hexmask.long.word 0x3C 0.--15. 1. "KNEEPOINT,Knee point: Knee point 2" line.long 0x40 "KNEE_NPOINT3_CAM0,Camera 0 HDR Decompress New KneePoint 3 Register" hexmask.long.word 0x40 0.--15. 1. "KNEEPOINT,Knee point: Knee point 3" line.long 0x44 "KNEE_NPOINT4_CAM0,Camera 0 HDR Decompress New KneePoint 4 Register" hexmask.long.word 0x44 0.--15. 1. "KNEEPOINT,Knee point: Knee point 4" tree.end tree.end tree "HDR_MERGE" base ad:0x4AE00300 group.long 0x0++0x47 line.long 0x0 "CTRL_CAM0,Camera 0 HDR Merge Control Register" bitfld.long 0x0 31. "ENABLE,HDR Enable" "0: off,1: on" bitfld.long 0x0 18.--19. "GAIN1BPP,Gain 1 BPP: Indicates the size of pixel components after applying the gain/leveling function on line path 1 of the HDR Merge" "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" bitfld.long 0x0 16.--17. "GAIN0BPP,Gain 0 BPP: Indicates the size of pixel components after applying the gain/leveling function on line path 0 of the HDR Merge" "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" bitfld.long 0x0 9. "BLEND_3X3,Selects the HDR blending mode" "0: 1x1,1: 3x3" bitfld.long 0x0 8. "MOTION_FIX_EN,Enable fixing of HDR artifacts due to motion" "0: Off,1: On" bitfld.long 0x0 4. "SAFETY_ON,Safety/testline operation: This field controls the HDR merge operation when a test lines are fed the HDR merge unit" "0: Off,1: On" newline bitfld.long 0x0 2.--3. "OBPP,OBPP: Indicates the size of pixel components that should be outputted from the HDR Merge unit" "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" line.long 0x4 "GAIN_OFFSET_CAM0,Camera 0 HDR Merge Gain Offset Register" hexmask.long.word 0x4 16.--31. 1. "OFFSET1,Offset for image 1: Provides the offset that is subtracted from pixel components of input image 1." hexmask.long.word 0x4 0.--15. 1. "OFFSET0,Offset for image 0: Provides the offset that is subtracted from pixel components of input image 0." line.long 0x8 "GAIN_SCALE_CAM0,Camera 0 HDR Merge Gain Scale Register" hexmask.long.word 0x8 16.--31. 1. "SCALE1,Scale for image 1: Provides the scaling factor with which input pixel components of image 1 are multiplied" hexmask.long.word 0x8 0.--15. 1. "SCALE0,Scale for image 0: Provides the scaling factor with which input pixel components of image 0 are multiplied" line.long 0xC "GAIN_SHIFT_CAM0,Camera 0 HDR Merge Gain Shift Register" hexmask.long.byte 0xC 16.--20. 1. "SHIFT1,Shift for image 1: Provides the shift factor (right shift) for gained image 1." hexmask.long.byte 0xC 0.--4. 1. "SHIFT0,Shift for image 0: Provides the shift factor (right shift) for gained image 0." line.long 0x10 "LUMA_TH_CAM0,Camera 0 HDR Merge Luma Threshold Register" hexmask.long.word 0x10 0.--15. 1. "TH0,Threshold 0: Provides luminance threshold 0." line.long 0x14 "LUMA_SCALE_CAM0,Camera 0 HDR Merge Luma Scale Register" hexmask.long.byte 0x14 24.--28. 1. "THSHIFT,Threshold Luma shift value: Provides a right shift value for binomial output before applying the threshold function" hexmask.long.byte 0x14 16.--20. 1. "SHIFT,Shift value: Provides a right shift value the scaling factor" hexmask.long.word 0x14 0.--15. 1. "SCALE,Scale: Provides a scaling value which multiplies the threshold-conditioned approximated luminance" line.long 0x18 "DOWNSCALE_CAM0,Camera 0 HDR Merge Down Scale Register" hexmask.long.byte 0x18 16.--20. 1. "IMGSCALE1,Down scale for image 1: Provides the down scaling (right shift) value corresponding to image 1" hexmask.long.byte 0x18 0.--4. 1. "IMGSCALE0,Down scale for image0: Provides the down scaling (right shift) value corresponding to image 0" line.long 0x1C "UPSCALE_CAM0,Camera 0 HDR Merge Up Scale Register" hexmask.long.byte 0x1C 16.--19. 1. "IMGSCALE1,Up scale for image 1: Provides the up scaling (left shift) value corresponding to image 1" hexmask.long.byte 0x1C 0.--3. 1. "IMGSCALE0,Up scale for image0: Provides the up scaling (left shift) value corresponding to image 0" line.long 0x20 "POST_SCALE_CAM0,Camera 0 HDR Merge Post Scale Register" hexmask.long.byte 0x20 0.--4. 1. "SCALE,Post down scale: Provides the down scaling (right shift) of the final blended output" line.long 0x24 "S_GAIN_OFFSET_CAM0,Camera 0 HDR Merge Safety Gain Offset Register" hexmask.long.word 0x24 16.--31. 1. "OFFSET1,Offset for image 1: Provides the offset that is subtracted from pixel components of input image 1." hexmask.long.word 0x24 0.--15. 1. "OFFSET0,Offset for image 0: Provides the offset that is subtracted from pixel components of input image 0." line.long 0x28 "S_GAIN_SCALE_CAM0,Camera 0 HDR Merge Safety Gain Scale Register" hexmask.long.word 0x28 16.--31. 1. "SCALE1,Scale for image 1: Provides the scaling factor with which input pixel components of image 1 are multiplied" hexmask.long.word 0x28 0.--15. 1. "SCALE0,Scale for image 0: Provides the scaling factor with which input pixel components of image 0 are multiplied" line.long 0x2C "S_GAIN_SHIFT_CAM0,Camera 0 HDR Merge Safety Gain Shift Register" hexmask.long.byte 0x2C 16.--20. 1. "SHIFT1,Shift for image 1: Provides the shift factor (right shift for gained image 1." hexmask.long.byte 0x2C 0.--4. 1. "SHIFT0,Shift for image 0: Provides the shift factor (right shift) for gained image 0." line.long 0x30 "S_LUMA_TH_CAM0,Camera 0 HDR Merge Safety Luma Threshold Register" hexmask.long.word 0x30 0.--15. 1. "TH0,Threshold 0: Provides luminance threshold 0." line.long 0x34 "S_LUMA_SCALE_CAM0,Camera 0 HDR Merge Safety Luma Scale Register" hexmask.long.byte 0x34 24.--28. 1. "THSHIFT,Threshold Luma shift value: Provides a right shift value for binomial output before applying the threshold function" hexmask.long.byte 0x34 16.--20. 1. "SHIFT,Shift value: Provides a right shift value the scaling factor" hexmask.long.word 0x34 0.--15. 1. "SCALE,Scale: Provides a scaling value which multiplies the threshold-conditioned approximated luminance" line.long 0x38 "S_DOWNSCALE_CAM0,Camera 0 HDR Merge Safety Down Scale Register" hexmask.long.byte 0x38 16.--20. 1. "IMGSCALE1,Down scale for image 1: Provides the down scaling (right shift) value corresponding to image 1" hexmask.long.byte 0x38 0.--4. 1. "IMGSCALE0,Down scale for image0: Provides the down scaling (right shift) value corresponding to image 0" line.long 0x3C "S_UPSCALE_CAM0,Camera 0 HDR Merge Safety Up Scale Register" hexmask.long.byte 0x3C 16.--19. 1. "IMGSCALE1,Up scale for image 1: Provides the up scaling (left shift) value corresponding to image 1" hexmask.long.byte 0x3C 0.--3. 1. "IMGSCALE0,Up scale for image0: Provides the up scaling (left shift) value corresponding to image 0" line.long 0x40 "S_POST_SCALE_CAM0,Camera 0 HDR Merge Safety Post Scale Register" hexmask.long.byte 0x40 0.--4. 1. "SCALE,Post down scale: Provides the down scaling (right shift) of the final blended output" line.long 0x44 "S_LINE_NUM_CAM0,Camera 0 HDR Merge Safety Line Number Register" hexmask.long.word 0x44 1.--15. 1. "LINE,Safety line index: Provides the index of the first safety line for both the input images" tree.end tree "IDBG" tree "IDBG1" base ad:0x4AE00FC0 group.long 0x0++0x3 line.long 0x0 "LINE_NUM,IMA Debug Line Number Register" hexmask.long.tbyte 0x0 0.--16. 1. "LINE_NUM,Line number: Provides line number to be debugged. A value of all 1s disable debug." rgroup.long 0x4++0x3 line.long 0x0 "CURR_LINE_NUM,IMA Debug Current Line Number Register" bitfld.long 0x0 31. "DBG_HIT,Debug hit: Status of debug hit/entered for a given line number." "0,1" hexmask.long.tbyte 0x0 0.--16. 1. "CURR_LINE_NUM,Current Line number: Provides status of current line number." group.long 0x8++0x7 line.long 0x0 "IMA,IMA Debug Address Register" rbitfld.long 0x0 30.--31. "WDWF,Write Double Word Flag: Provides status of number of IMD write accesses to be performed before the line buffer address index is incremented This is a status flag for software information" "0: 4 Writes are required before incrementing line..,1: 3 Writes are required before incrementing line..,2: 2 Writes are required before incrementing line..,3: Next write will increment line buffer address.." rbitfld.long 0x0 28.--29. "RDWF,Read Double Word Flag: Provides status of number of IMD read accesses to be performed before the line buffer address index is incremented This is a status flag for software information" "0: 4 Reads are required before incrementing line..,1: 3 Reads are required before incrementing line..,2: 2 Reads are required before incrementing line..,3: Next read will increment line buffer address index" newline hexmask.long.byte 0x0 16.--20. 1. "NAME,Line number index: Provides index of line buffer to be accessed." hexmask.long.word 0x0 0.--11. 1. "ADDR,Line number address: Provides address of memory word to be accessed for a line buffer." line.long 0x4 "IMD,IMA Debug Data Register" hexmask.long 0x4 0.--31. 1. "DATA,Data: Data value to be returned." rgroup.long 0x10++0x3 line.long 0x0 "DONE_STAT,Debug Line Done Status Register" bitfld.long 0x0 12. "RGBIR,RGBIR done" "0,1" bitfld.long 0x0 11. "HC,Head Color done" "0,1" newline bitfld.long 0x0 10. "HDRDECOMP0,HDR Decompression 0 done" "0,1" bitfld.long 0x0 9. "HDRDECOMP1,HDR Decompression 1 done" "0,1" newline bitfld.long 0x0 8. "OBWB0,OB_WB0 done" "0,1" bitfld.long 0x0 7. "OBWB1,OB_WB1 done" "0,1" newline bitfld.long 0x0 6. "OB_WB2,OB_WB2 done" "0,1" bitfld.long 0x0 5. "CTEMP,CTEMP done" "0,1" newline bitfld.long 0x0 4. "STAT,STAT done" "0,1" bitfld.long 0x0 3. "BNR0,BNR0 done" "0,1" newline bitfld.long 0x0 2. "HDRMERGE,HDR Merge done" "0,1" bitfld.long 0x0 1. "IRCOMP,IR Compression done" "0,1" newline bitfld.long 0x0 0. "VIG,Vignetting done" "0,1" tree.end tree "IDBG2" base ad:0x4AE01FC0 group.long 0x0++0x3 line.long 0x0 "LINE_NUM,IMA Debug Line Number Register" hexmask.long.tbyte 0x0 0.--16. 1. "LINE_NUM,Line number: Provides line number to be debugged. A value of all 1s disable debug." rgroup.long 0x4++0x3 line.long 0x0 "CURR_LINE_NUM,IMA Debug Current Line Number Register" bitfld.long 0x0 31. "DBG_HIT,Debug hit: Status of debug hit/entered for a given line number." "0,1" hexmask.long.tbyte 0x0 0.--16. 1. "CURR_LINE_NUM,Current Line number: Provides status of current line number." group.long 0x8++0x7 line.long 0x0 "IMA,IMA Debug Address Register" rbitfld.long 0x0 30.--31. "WDWF,Write Double Word Flag: Provides status of number of IMD write accesses to be performed before the line buffer address index is incremented This is a status flag for software information" "0: 4 Writes are required before incrementing line..,1: 3 Writes are required before incrementing line..,2: 2 Writes are required before incrementing line..,3: Next write will increment line buffer address.." rbitfld.long 0x0 28.--29. "RDWF,Read Double Word Flag: Provides status of number of IMD read accesses to be performed before the line buffer address index is incremented This is a status flag for software information" "0: 4 Reads are required before incrementing line..,1: 3 Reads are required before incrementing line..,2: 2 Reads are required before incrementing line..,3: Next read will increment line buffer address index" newline hexmask.long.byte 0x0 16.--21. 1. "NAME,Line number index: Provides index of line buffer to be accessed." hexmask.long.word 0x0 0.--11. 1. "ADDR,Line number address: Provides address of memory word to be accessed for a line buffer." line.long 0x4 "IMD,IMA Debug Data Register" hexmask.long 0x4 0.--31. 1. "DATA,Data: Data value to be returned." rgroup.long 0x10++0x3 line.long 0x0 "DONE_STAT,Debug Line Done Status Register" bitfld.long 0x0 11. "PKT,Packetizer done" "0,1" bitfld.long 0x0 10. "DRC,DRC done" "0,1" newline bitfld.long 0x0 9. "CSC,CSC done" "0,1" bitfld.long 0x0 8. "DEMOSAIC,DEMOSAIC done" "0,1" newline bitfld.long 0x0 7. "NR,NR done" "0,1" bitfld.long 0x0 6. "DMAP,DMAP done" "0,1" newline bitfld.long 0x0 5. "DF,DF done" "0,1" bitfld.long 0x0 4. "EE,EE done" "0,1" newline bitfld.long 0x0 3. "CCONVMED,CCONVMED done" "0,1" bitfld.long 0x0 2. "CAS,CAS done" "0,1" newline bitfld.long 0x0 1. "GCM,Gamma Correction Matrix done" "0,1" bitfld.long 0x0 0. "AF,Auto Focus done" "0,1" tree.end tree.end tree "IR_COMPRESS" base ad:0x4AE00780 group.long 0x0++0x47 line.long 0x0 "CTRL_CAM0,Camera 0 IR Compress Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls the IR compression unit for respective camera context" "0: IR compression operation is disabled and the..,1: IR compression operation is enabled." bitfld.long 0x0 0. "OBPP,Output BPP: This field controls bpp of compressed output IR." "0: Output is 8bpp.,1: Output is 16bpp." line.long 0x4 "KNEE_POINT1_CAM0,Camera 0 IR Compress KneePoint 1 Register" hexmask.long.tbyte 0x4 0.--19. 1. "KNEEPOINT,Knee point: Knee point 1" line.long 0x8 "KNEE_POINT2_CAM0,Camera 0 IR Compress KneePoint 2 Register" hexmask.long.tbyte 0x8 0.--19. 1. "KNEEPOINT,Knee point: Knee point 2" line.long 0xC "KNEE_POINT3_CAM0,Camera 0 IR Compress KneePoint 3 Register" hexmask.long.tbyte 0xC 0.--19. 1. "KNEEPOINT,Knee point: Knee point 3" line.long 0x10 "KNEE_POINT4_CAM0,Camera 0 IR Compress KneePoint 4 Register" hexmask.long.tbyte 0x10 0.--19. 1. "KNEEPOINT,Knee point: Knee point 4" line.long 0x14 "KNEE_OFFSET0_CAM0,Camera 0 IR Compress Knee Offset 0 Register" hexmask.long.tbyte 0x14 0.--19. 1. "OFFSET,Knee offset: Knee offset 0" line.long 0x18 "KNEE_OFFSET1_CAM0,Camera 0 IR Compress Knee Offset 1 Register" hexmask.long.tbyte 0x18 0.--19. 1. "OFFSET,Knee offset: Knee offset 1" line.long 0x1C "KNEE_OFFSET2_CAM0,Camera 0 IR Compress Knee Offset 2 Register" hexmask.long.tbyte 0x1C 0.--19. 1. "OFFSET,Knee offset: Knee offset 2" line.long 0x20 "KNEE_OFFSET3_CAM0,Camera 0 IR Compress Knee Offset 3 Register" hexmask.long.tbyte 0x20 0.--19. 1. "OFFSET,Knee offset: Knee offset 3" line.long 0x24 "KNEE_OFFSET4_CAM0,Camera 0 IR Compress Knee Offset 4 Register" hexmask.long.tbyte 0x24 0.--19. 1. "OFFSET,Knee offset: Knee offset 4" line.long 0x28 "KNEE_RATIO01_CAM0,Camera 0 IR Compress Knee Ratio 01 Register" hexmask.long.word 0x28 16.--31. 1. "RATIO1,Knee ratio: Knee ratio 1. Value is specified in u1.15 format." hexmask.long.word 0x28 0.--15. 1. "RATIO0,Knee ratio: Knee ratio 0. Value is specified in u1.15 format." line.long 0x2C "KNEE_RATIO23_CAM0,Camera 0 IR Compress Knee Ratio 23 Register" hexmask.long.word 0x2C 16.--31. 1. "RATIO3,Knee ratio: Knee ratio 3. Value is specified in u1.15 format." hexmask.long.word 0x2C 0.--15. 1. "RATIO2,Knee ratio: Knee ratio 2. Value is specified in u1.15 format." line.long 0x30 "KNEE_RATIO4_CAM0,Camera 0 IR Compress Knee Ratio 4 Register" hexmask.long.word 0x30 0.--15. 1. "RATIO4,Knee ratio: Knee ratio 4. Value is specified in u1.15 format." line.long 0x34 "KNEE_NPOINT0_CAM0,Camera 0 IR Compress New KneePoint 0 Register" hexmask.long.word 0x34 0.--15. 1. "KNEEPOINT,Knee point: New knee point 0" line.long 0x38 "KNEE_NPOINT1_CAM0,Camera 0 IR Compress New KneePoint 1 Register" hexmask.long.word 0x38 0.--15. 1. "KNEEPOINT,Knee point: New knee point 1" line.long 0x3C "KNEE_NPOINT2_CAM0,Camera 0 IR Compress New KneePoint 2 Register" hexmask.long.word 0x3C 0.--15. 1. "KNEEPOINT,Knee point: New knee point 2" line.long 0x40 "KNEE_NPOINT3_CAM0,Camera 0 IR Compress New KneePoint 3 Register" hexmask.long.word 0x40 0.--15. 1. "KNEEPOINT,Knee point: New knee point 3" line.long 0x44 "KNEE_NPOINT4_CAM0,Camera 0 IR Compress New KneePoint 4 Register" hexmask.long.word 0x44 0.--15. 1. "KNEEPOINT,Knee point: New knee point 4" tree.end tree "NR" base ad:0x4AE01400 group.long 0x0++0xB line.long 0x0 "CTRL_CAM0,Camera 0 NR Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls if the noise reduction is turned on" "0: off,1: on" bitfld.long 0x0 8.--9. "DEBUG,Debug / Tuning view" "0: off,1: filtered as normal texture,2: filtered as black,?" line.long 0x4 "BLEND_SCALE_CAM0,Camera 0 NR Blending Scale Register" hexmask.long.byte 0x4 24.--31. 1. "GAIN,Gain: Gain value for the blending factor determination" hexmask.long.byte 0x4 16.--23. 1. "SHIFT,Shift: Shift value for the blending factor determination" hexmask.long.word 0x4 0.--15. 1. "SCALE,Scale: Scale factor for the blending factor determination" line.long 0x8 "BLEND_TH0_CAM0,Camera 0 NR Blend Threshold 0 Register" hexmask.long.tbyte 0x8 0.--19. 1. "TH,Threshold 0: Provides threshold 0 value for determining the blending factor" rgroup.long 0x10++0x3 line.long 0x0 "EDGECNT_CAM0,Camera 0 NR Edge Count Register" hexmask.long.tbyte 0x0 0.--23. 1. "EDGE_PIXELS,EdgeCnt: Provides the number of edge pixels for the given blending settings and the image" tree.end tree "OB_WB" tree "OB_WB0" base ad:0x4AE00200 group.long 0x0++0x13 line.long 0x0 "CTRL_CAM0,Camera 0 OB WB Control Register" bitfld.long 0x0 2.--3. "OBPP,OBPP: Indicates the size of pixel components that should be outputted from the OB_WB unit for respective camera context" "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" line.long 0x4 "R_CTRL_CAM0,Camera 0 OB_WB Red Channel Control Register" hexmask.long.word 0x4 16.--31. 1. "GAIN,Gain: Provides gain for RED channel" hexmask.long.word 0x4 0.--15. 1. "OFFSET,Offset: Provides offset for RED channel. Value specified is in unsigned 16-bit format." line.long 0x8 "GR_CTRL_CAM0,Camera 0 OB_WB GreenR Channel Control Register" hexmask.long.word 0x8 16.--31. 1. "GAIN,Gain: Provides gain for GreenR channel" hexmask.long.word 0x8 0.--15. 1. "OFFSET,Offset: Provides offset for GreenR channel. Value specified is in unsigned 16-bit format." line.long 0xC "GB_CTRL_CAM0,Camera 0 OB_WB GreenB Channel Control Register" hexmask.long.word 0xC 16.--31. 1. "GAIN,Gain: Provides gain for GreenB channel" hexmask.long.word 0xC 0.--15. 1. "OFFSET,Offset: Provides offset for GreenB channel. Value specified is in unsigned 16-bit format." line.long 0x10 "B_CTRL_CAM0,Camera 0 OB_WB Blue Channel Control Register" hexmask.long.word 0x10 16.--31. 1. "GAIN,Gain: Provides gain for BLUE channel" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Offset: Provides offset for BLUE channel. Value specified is in unsigned 16-bit format." tree.end tree "OB_WB1" base ad:0x4AE00240 group.long 0x0++0x13 line.long 0x0 "CTRL_CAM0,Camera 0 OB WB Control Register" bitfld.long 0x0 2.--3. "OBPP,OBPP: Indicates the size of pixel components that should be outputted from the OB_WB unit for respective camera context" "0: 12 bpp,1: 14 bpp,2: 16 bpp,?" line.long 0x4 "R_CTRL_CAM0,Camera 0 OB_WB Red Channel Control Register" hexmask.long.word 0x4 16.--31. 1. "GAIN,Gain: Provides gain for RED channel" hexmask.long.word 0x4 0.--15. 1. "OFFSET,Offset: Provides offset for RED channel. Value specified is in unsigned 16-bit format." line.long 0x8 "GR_CTRL_CAM0,Camera 0 OB_WB GreenR Channel Control Register" hexmask.long.word 0x8 16.--31. 1. "GAIN,Gain: Provides gain for GreenR channel" hexmask.long.word 0x8 0.--15. 1. "OFFSET,Offset: Provides offset for GreenR channel. Value specified is in unsigned 16-bit format." line.long 0xC "GB_CTRL_CAM0,Camera 0 OB_WB GreenB Channel Control Register" hexmask.long.word 0xC 16.--31. 1. "GAIN,Gain: Provides gain for GreenB channel" hexmask.long.word 0xC 0.--15. 1. "OFFSET,Offset: Provides offset for GreenB channel. Value specified is in unsigned 16-bit format." line.long 0x10 "B_CTRL_CAM0,Camera 0 OB_WB Blue Channel Control Register" hexmask.long.word 0x10 16.--31. 1. "GAIN,Gain: Provides gain for BLUE channel" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Offset: Provides offset for BLUE channel. Value specified is in unsigned 16-bit format." tree.end tree "OB_WB2" base ad:0x4AE00280 group.long 0x0++0x13 line.long 0x0 "CTRL_CAM0,Camera 0 OB WB Control Register" bitfld.long 0x0 2.--3. "OBPP,OBPP: Indicates the size of pixel components that should be outputted from the OB_WB unit for respective camera context" "0: 12 bpp,1: 14 bpp,2: 16 bpp,3: 20 bpp" line.long 0x4 "R_CTRL_CAM0,Camera 0 OB_WB Red Channel Control Register" hexmask.long.word 0x4 16.--31. 1. "GAIN,Gain: Provides gain for RED channel" hexmask.long.word 0x4 0.--15. 1. "OFFSET,Offset: Provides offset for RED channel. Value specified is in unsigned 16-bit format." line.long 0x8 "GR_CTRL_CAM0,Camera 0 OB_WB GreenR Channel Control Register" hexmask.long.word 0x8 16.--31. 1. "GAIN,Gain: Provides gain for GreenR channel" hexmask.long.word 0x8 0.--15. 1. "OFFSET,Offset: Provides offset for GreenR channel. Value specified is in unsigned 16-bit format." line.long 0xC "GB_CTRL_CAM0,Camera 0 OB_WB GreenB Channel Control Register" hexmask.long.word 0xC 16.--31. 1. "GAIN,Gain: Provides gain for GreenB channel" hexmask.long.word 0xC 0.--15. 1. "OFFSET,Offset: Provides offset for GreenB channel. Value specified is in unsigned 16-bit format." line.long 0x10 "B_CTRL_CAM0,Camera 0 OB_WB Blue Channel Control Register" hexmask.long.word 0x10 16.--31. 1. "GAIN,Gain: Provides gain for BLUE channel" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Offset: Provides offset for BLUE channel. Value specified is in unsigned 16-bit format." tree.end tree.end tree "PACKETIZER" base ad:0x4AE01580 group.long 0x0++0xB line.long 0x0 "CH0_CTRL_CAM0,Camera 0 Channel 0 Control Register" bitfld.long 0x0 12.--14. "LSA,Left shift for alignment: Provides the left shift value applied after the right shift operation on channel 0" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "RSA,Right shift for alignment: Provides the right shift value before performing subsequent operation on channel 0" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 0.--3. 1. "OBPP,Output BPP: Provides the BPP for the channel 0 storage" line.long 0x4 "CH12_CTRL_CAM0,Camera 0 Channel 1.2 Control Register" bitfld.long 0x4 16.--17. "SUBSAMPLE,Sub-sampling of UV: Provides the sub-sampling factor for U & V." "0: No subsample. For YUV444 storage.,1: Horizontal subsampling. For YUV422 storage.,2: Horizontal & vertical subsampling. For YUV420..,?" bitfld.long 0x4 12.--14. "LSA,Left shift for alignment: Provides the left shift value applied after the right shift operation on channel 1 & 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 8.--10. "RSA,Right shift for alignment: Provides the right shift value before performing subsequent operation on channel 1 & 2" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x4 0.--3. 1. "OBPP,Output BPP: Provides the BPP for the channel 1 & 2 storage" line.long 0x8 "PACK_CTRL_CAM0,Camera 0 Pack Control Register" hexmask.long.byte 0x8 16.--19. 1. "A0S,Append 0s: Provides the mechanism to append 0s towards MSBs for interelaved packing type." bitfld.long 0x8 12.--13. "ORDER2,Order of Channel 2: Provides the relative order of channel 2 w" "?,?,2: Provides the relative order of channel 2 w,?" newline bitfld.long 0x8 10.--11. "ORDER1,Order of Channel 1: Provides the relative order of channel 1 w" "?,1: Provides the relative order of channel 1 w,?,?" bitfld.long 0x8 8.--9. "ORDER0,Order of Channel 0: Provides the relative order of channel 0 w" "0: Provides the relative order of channel 0 w,?,?,?" newline bitfld.long 0x8 0. "TYPE,Packing type BPP: Provides the choice between semi-planar and interleaved" "0: Semi-planar: Y as a separate plane in memory..,1: Interleaved: Y in same plane as UV in memory.." tree.end tree "PIPE_CONF" base ad:0x4AE00000 group.long 0x0++0xB line.long 0x0 "SOFT_RESET,NEO Soft Reset Register" bitfld.long 0x0 1. "HARD_RESET,Hard reset: Writing 1 provides a hard reset to the pipeline" "0,1" bitfld.long 0x0 0. "SOFT_RESET,Soft reset: Writing 1 provides a soft reset to the pipeline" "0,1" line.long 0x4 "BUS_TXPARAM,NEO Bus Transaction Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "BSIZE,Burst Size: Provides mechanism to control the number of beats within a single bust on read transactions from NEO" hexmask.long.byte 0x4 16.--23. 1. "POSTQOS,Post QoS Escalation: Provides a threshold above which an independent QoS signal on the output of NEO is set" newline hexmask.long.byte 0x4 8.--15. 1. "OTHT,Outstanding Transaction High Threshold: Provides a high threshold below which the Quality of Service (QoS) parameter associated with a bus transfer is set if the outstanding transaction low threshold is satisfied" hexmask.long.byte 0x4 0.--7. 1. "OTLT,Outstanding Transaction Low Threshold: Provides a low threshold above which the Quality of Service (QoS) parameter associated with a bus transfer is set" line.long 0x8 "REG_XFR_DIS,NEO Register Transfer Error Disable" bitfld.long 0x8 31. "XFR_ERR_DIS,Transfer error disable: Writing 1 disables error response on all registers of pipeline 1 and pipeline 2" "0,1" group.long 0x10++0x13 line.long 0x0 "CSI_CTRL,NEO CSI Control Register" bitfld.long 0x0 31. "CSI_EN,Enables CSI stream control into the Neo." "0: CSI streaming is disabled. Input image(s) are..,1: CSI streaming is enabled. No read operation is.." bitfld.long 0x0 30. "DEVL,Dual Exposure VSYNC lock: Setting this field to 1 enables Neo block to lock onto ongoing CSI frame" "0,1" newline bitfld.long 0x0 29. "SSEN,Single Step Frame: Setting this field to 1 enables Neo block to single step over the CSI frame" "0,1" hexmask.long.byte 0x0 8.--12. 1. "VID1,Provides virtual channel ID for line path 1" newline hexmask.long.byte 0x0 0.--4. 1. "VID0,Provides virtual channel ID for line path 0" line.long 0x4 "FRAME_NUM,NEO Frame Number Register" hexmask.long.word 0x4 16.--31. 1. "SHD_FRAME,Shadowed frame number: When the register shadowing update is triggered by software (rather than at every frame start) then this register provides the frame number at which the register shadowing was done by the hardware and the corresponding.." hexmask.long.word 0x4 0.--15. 1. "CURR_FRAME,Current frame number: A free running counter incremented at every frame start of pipeline 1" line.long 0x8 "REG_SHD_CTRL,NEO Register Shadowing Control Register" bitfld.long 0x8 31. "CTRL,Register Shadowing Control." "0: Register shadowing is done at every..,1: Register shadowing is done at frame/context.." line.long 0xC "REG_SHD_CMD,NEO Register Shadowing Command Register" hexmask.long 0xC 0.--31. 1. "CMD,Register Shadowing Command." line.long 0x10 "TRIG_CAM0,NEO Camera 0 Trigger Register" hexmask.long 0x10 0.--31. 1. "TRIGGER,Trigger: Performing a write operation provides a trigger to the NEO pipeline." group.long 0x30++0x7 line.long 0x0 "IMG_CONF_CAM0,NEO Camera 0 Image Configuration Register" bitfld.long 0x0 21. "LPALIGN1,Line path 1 pixel alignment: This field indicates the pixel alignment for the line path 1 of NEO pipeline for respective camera context" "0: LSB aligned - load the active pixel value..,1: MSB aligned - load the active pixel value.." bitfld.long 0x0 20. "INALIGN1,Input image 1 pixel alignment: This field indicates the pixel alignment of image 1 in the input buffer 1 for respective camera context" "0: LSB aligned - lower order bits hold pixel value,1: MSB aligned - higher order bits hold pixel values" newline hexmask.long.byte 0x0 16.--19. 1. "IBPP1,Input image 1 bpp: Indicates the size of pixel components of image 1 in input buffer 1." bitfld.long 0x0 5. "LPALIGN0,Line path 0 pixel alignment: This field indicates the pixel alignment for the line path 0 of NEO pipeline for respective camera context" "0: LSB aligned - load the active pixel value..,1: MSB aligned - load the active pixel value.." newline bitfld.long 0x0 4. "INALIGN0,Input image 0 pixel alignment: This field indicates the pixel alignment of image 0 in the input buffer 0 for respective camera context" "0: LSB aligned - lower order bits hold pixel value,1: MSB aligned - higher order bits hold pixel values" hexmask.long.byte 0x0 0.--3. 1. "IBPP0,Input image 0 bpp: Indicates the size of pixel components of image 0 in input buffer 0." line.long 0x4 "IMG_SIZE_CAM0,NEO Camera 0 Image Size Register" hexmask.long.word 0x4 16.--31. 1. "HEIGHT,Height: Provides the height of the image 0 and image 1 in terms of number of horizontal lines for respective camera context" hexmask.long.word 0x4 0.--15. 1. "WIDTH,Width: Provides the width of the image 0 and image 1 in terms of number of pixels (pixels per line) for respective camera context" group.long 0x3C++0x37 line.long 0x0 "IMG0_IN_ADDR_CAM0,NEO Camera 0 Input Image 0 Base Address Register" hexmask.long 0x0 0.--31. 1. "ADDR,Address: Upper 32-bits of 36-bit Base address of image frame for processing (4 LSBs of 36 bit address are assumed 0s)" line.long 0x4 "IMG1_IN_ADDR_CAM0,NEO Camera 0 Input Image 1 Base Address Register" hexmask.long 0x4 0.--31. 1. "ADDR,Address: Upper 32-bits of 36-bit Base address of image frame for processing (4 LSBs of 36 bit address are assumed 0s)" line.long 0x8 "OUTCH0_ADDR_CAM0,NEO Camera 0 Output Channel 0 Base Address Register" hexmask.long 0x8 0.--31. 1. "ADDR,Address: Upper 32-bits of 36-bit Base address for storage (4 LSBs of 36 bit address are assumed 0s)" line.long 0xC "OUTCH1_ADDR_CAM0,NEO Camera 0 Output Channel 1 Base Address Register" hexmask.long 0xC 0.--31. 1. "ADDR,Address: Upper 32-bits of 36-bit Base address for storage (4 LSBs of 36 bit address are assumed 0s)" line.long 0x10 "OUTIR_ADDR_CAM0,NEO Camera 0 Output IR Component Base Address Register" hexmask.long 0x10 0.--31. 1. "ADDR,Address: Upper 32-bits of 36-bit Base address for IR storage (4 LSBs of 36 bit address are assumed 0s)" line.long 0x14 "IMG0_IN_LS_CAM0,NEO Camera 0 Input Image 0 Line Stride Register" hexmask.long 0x14 4.--31. 1. "LS,Line stride: Line stride for input image 0" line.long 0x18 "IMG1_IN_LS_CAM0,NEO Camera 0 Input Image 1 Line Stride Register" hexmask.long 0x18 4.--31. 1. "LS,Line stride: Line stride for input image 1" line.long 0x1C "OUTCH0_LS_CAM0,NEO Camera 0 Output Y Component Line Stride Register" hexmask.long 0x1C 4.--31. 1. "LS,Line stride: Line stride for output channel 0" line.long 0x20 "OUTCH1_LS_CAM0,NEO Camera 0 Output Channel 1 Component Line Stride Register" hexmask.long 0x20 4.--31. 1. "LS,Line stride: Line stride for output channel" line.long 0x24 "OUTIR_LS_CAM0,NEO Camera 0 Output IR Component Line Stride Register" hexmask.long 0x24 4.--31. 1. "LS,Line stride: Line stride for output IR" line.long 0x28 "SKIP_CTRL0,NEO Camera 0 Pixel Skip Control Register" hexmask.long.word 0x28 16.--31. 1. "POSTSKIP,Post skip: This field provide the number of pixel components to be skipped before the end of each line" hexmask.long.word 0x28 0.--15. 1. "PRESKIP,Pre skip: This field provide the number of pixel components to be skipped at the start of each line" line.long 0x2C "INT_EN0,NEO Camera 0 Interrupt Enable Register" bitfld.long 0x2C 30. "EN_TRIG_ERR,Interrupt enable on a trigger error: Programming a 1 enables generation of interrupt on trigger error" "0,1" bitfld.long 0x2C 29. "EN_CSI_TERR,Interrupt enable on a CSI timing error: Programming a 1 enables generation of interrupt on CSI interface timing error" "0,1" newline hexmask.long.byte 0x2C 16.--19. 1. "EN_BUS_ERR,Interrupt enable on a bus error response: Programming a 1 enables generation of interrupt when a corresponding bus response is received" bitfld.long 0x2C 5. "EN_DRCD,Interrupt enable on DRC done on pipeline 2: Programming a 1 enables generation of interrupt on complete of frame processing for DRC" "0,1" newline bitfld.long 0x2C 4. "EN_STATD,Interrupt enable on a statistics done on pipeline 1: Programming a 1 enables generation of interrupt on complete of frame processing for statistics" "?,1: Programming a 1 enables generation of interrupt.." bitfld.long 0x2C 3. "EN_FD2,Interrupt enable on a frame done of pipeline 2: Programming a 1 enables generation of interrupt on complete of frame processing for pipeline 2" "0,1" newline bitfld.long 0x2C 2. "EN_FD1,Interrupt enable on a frame done of pipeline 1: Programming a 1 enables generation of interrupt on complete of frame processing for pipeline 1" "?,1: Programming a 1 enables generation of interrupt.." bitfld.long 0x2C 1. "EN_FS2,Interrupt enable on a frame start of pipeline 2: Programming a 1 enables generation of interrupt on generation of frame start for pipeline 2" "0,1" newline bitfld.long 0x2C 0. "EN_FS1,Interrupt enable on a frame start of pipeline 1: Programming a 1 enables generation of interrupt on generation of frame start for pipeline 1" "?,1: Programming a 1 enables generation of interrupt.." line.long 0x30 "INT_STAT0,NEO Camera 0 Interrupt Status Register" rbitfld.long 0x30 31. "BUSY,Pipeline busy : Provides the running/operation status for the pipeline." "0: Pipeline is ready to accept more triggers,1: Pipeline is busy and cannot accept more triggers" eventfld.long 0x30 30. "S_TRIG_ERR,Trigger error: Hardware sets this field when it receives multiple trigger request during pipeline operation than it can handle" "0: No trigger error,1: Trigger error generated" newline eventfld.long 0x30 29. "S_CSI_TERR,Status on CSI timing error: Hardware sets this field when it receives a timing error from the CSI interface when enabled" "0,1" hexmask.long.byte 0x30 16.--19. 1. "S_BUS_ERR,Status on bus error response: Hardware sets this field when read and write DMA receive a bus error response from the bus interface unit" newline eventfld.long 0x30 5. "S_DRCD,Status on DRC done on pipeline 2: Hardware sets this field when DRC block of pipeline 2 finishes its frame processing" "0,1" eventfld.long 0x30 4. "S_STATD,Status on statistics done on pipeline 1: Hardware sets this field when statistics inside pipeline 1 are complete over the whole image" "?,1: Hardware sets this field when statistics inside.." newline eventfld.long 0x30 3. "S_FD2,Status on frame done of pipeline 2: Hardware sets this field when pipeline 2 finishes its frame processing and all bus transactions" "0,1" eventfld.long 0x30 2. "S_FD1,Status on frame done of pipeline 1: Hardware sets this field when pipeline 1 finishes its frame processing" "?,1: Hardware sets this field when pipeline 1.." newline eventfld.long 0x30 1. "S_FS2,Status on frame start of pipeline 2: Hardware sets this field when pipeline 2 begins its frame processing" "0,1" eventfld.long 0x30 0. "S_FS1,Status of frame start of pipeline 1: Hardware sets this field when pipeline 1 begins its frame processing" "?,1: Hardware sets this field when pipeline 1 begins.." line.long 0x34 "CSI_STAT,NEO CSI Timing Status Register" eventfld.long 0x34 31. "S_STOP,Status of acknowledgement of STOP/disablement of CSI interface: Hardware sets it to 1 when it acknowledges stop/disablement of CSI interface" "0,1" eventfld.long 0x34 23. "S_DATA_LP1,Status of data overflow from pipeline for CSI data on linepath 1: Hardware sets it to 1 if it receives CSI data on linepath 1 faster than what it could process" "?,1: Hardware sets it to 1" newline eventfld.long 0x34 22. "S_LL_LP1,Status of long line: Hardware sets it to 1 if no" "0,1" eventfld.long 0x34 21. "S_CMD_LP1,Status of command signals to pipeline: Hardware sets it to 1 if it is not able to transfer the command signals such VSYNC HSYNC and DATA to Neo block for linepath 1" "0,1" newline eventfld.long 0x34 20. "S_LO_LP1,Status of line pointer storage to pipeline: Hardware sets it to 1 if it is not able to set subsequent internal pointer for pipeline to start of linepath 1" "0,1" eventfld.long 0x34 19. "S_LOC_LP1,Status of line pointer retrieval from pipeline for pipeline clock: Hardware sets it to 1 if it is not able to fetch internal pointer for storing the pixel data for the pipeline clock domain of linepath 1" "0,1" newline eventfld.long 0x34 18. "S_DO_LP1,Status of data overflow: Hardware sets it to 1 if it is not able to transfer the pixel data into Neo block for a given data rate of linepath 1" "0,1" eventfld.long 0x34 17. "S_SF_LP1,Status of short frame: Hardware sets it to 1 if no" "0,1" newline eventfld.long 0x34 16. "S_SL_LP1,Status of short line: Hardware sets it to 1 if no" "0,1" eventfld.long 0x34 7. "S_DATA_LP0,Status of data overflow from pipeline for CSI data on linepath 0: Hardware sets it to 1 if it receives CSI data on linepath 0 faster than what it could process" "0: Hardware sets it to 1,?" newline eventfld.long 0x34 6. "S_LL_LP0,Status of long line: Hardware sets it to 1 if no" "0,1" eventfld.long 0x34 5. "S_CMD_LP0,Status of command signals to pipeline: Hardware sets it to 1 if it is not able to transfer the command signals such VSYNC HSYNC and DATA to Neo block for linepath 0" "0,1" newline eventfld.long 0x34 4. "S_LO_LP0,Status of line pointer storage to pipeline: Hardware sets it to 1 if it is not able to set subsequent internal pointer for pipeline to start of linepath 0" "0,1" eventfld.long 0x34 3. "S_LOC_LP0,Status of line pointer retrieval from pipeline for pipeline clock: Hardware sets it to 1 if it is not able to fetch internal pointer for storing the pixel data for the pipeline clock domain of linepath 0" "0,1" newline eventfld.long 0x34 2. "S_DO_LP0,Status of data overflow: Hardware sets it to 1 if it is not able to transfer the pixel data into Neo block for a given data rate of linepath 0" "0,1" eventfld.long 0x34 1. "S_SF_LP0,Status of short frame: Hardware sets it to 1 if no" "0,1" newline eventfld.long 0x34 0. "S_SL_LP0,Status of short line: Hardware sets it to 1 if no" "0,1" tree.end tree "RGB_TO_YUV" base ad:0x4AE011C0 group.long 0x0++0x1B line.long 0x0 "GAIN_CTRL_CAM0,Camera 0 CSC Gain Control Register" hexmask.long.word 0x0 16.--31. 1. "BGAIN,Blue Gain: Provides the gain factor corresponding to blue component" hexmask.long.word 0x0 0.--15. 1. "RGAIN,Red Gain: Provides the gain factor corresponding to red component" line.long 0x4 "MAT0_CAM0,Camera 0 CSC Matrix 0 Register" hexmask.long.word 0x4 16.--31. 1. "R0C1,R0C1: Provides of the value of element at position (0 1) [Row Column] in the color space conversion matrix" hexmask.long.word 0x4 0.--15. 1. "R0C0,R0C0: Provides of the value of element at position (0 0) [Row Column] in the color space conversion matrix" line.long 0x8 "MAT1_CAM0,Camera 0 CSC Matrix 1 Register" hexmask.long.word 0x8 0.--15. 1. "R0C2,R0C2: Provides of the value of element at position (0 2) [Row Column] in the color space conversion matrix" line.long 0xC "MAT2_CAM0,Camera 0 CSC Matrix 2 Register" hexmask.long.word 0xC 16.--31. 1. "R1C1,R1C1: Provides of the value of element at position (1 1) [Row Column] in the color space conversion matrix" hexmask.long.word 0xC 0.--15. 1. "R1C0,R1C0: Provides of the value of element at position (1 0) [Row Column] in the color space conversion matrix" line.long 0x10 "MAT3_CAM0,Camera 0 CSC Matrix 3 Register" hexmask.long.word 0x10 0.--15. 1. "R1C2,R1C2: Provides of the value of element at position (1 2) [Row Column] in the color space conversion matrix" line.long 0x14 "MAT4_CAM0,Camera 0 CSC Matrix 4 Register" hexmask.long.word 0x14 16.--31. 1. "R2C1,R2C1: Provides of the value of element at position (2 1) [Row Column] in the color space conversion matrix" hexmask.long.word 0x14 0.--15. 1. "R2C0,R2C0: Provides of the value of element at position (2 0) [Row Column] in the color space conversion matrix" line.long 0x18 "MAT5_CAM0,Camera 0 CSC Matrix 5 Register" hexmask.long.word 0x18 0.--15. 1. "R2C2,R2C2: Provides of the value of element at position (2 2) [Row Column] in the color space conversion matrix" group.long 0x20++0xB line.long 0x0 "OFFSET0_CAM0,Camera 0 CSC Offset 0 Register" hexmask.long.tbyte 0x0 0.--20. 1. "OFFSET,Offset: Provides the offset value. Value specified is in s21 format." line.long 0x4 "OFFSET1_CAM0,Camera 0 CSC Offset 1 Register" hexmask.long.tbyte 0x4 0.--20. 1. "OFFSET,Offset: Provides the offset value. Value specified is in s21 format." line.long 0x8 "OFFSET2_CAM0,Camera 0 CSC Offset 2 Register" hexmask.long.tbyte 0x8 0.--20. 1. "OFFSET,Offset: Provides the offset value. Value specified is in s21 format." tree.end tree "RGBIR" base ad:0x4AE00600 group.long 0x0++0x1B line.long 0x0 "CTRL_CAM0,Camera 0 RGBIR Control Register" bitfld.long 0x0 31. "ENABLE,Enable: Control for RGBIR unit" "0: Disabled RGBIR output is same format is input,1: Enabled" line.long 0x4 "CCM0_CAM0,Camera 0 Color 0 Correction Register" hexmask.long.word 0x4 0.--15. 1. "CCM,Scaling factor: multiplication value in s4.12 format" line.long 0x8 "CCM1_CAM0,Camera 0 Color 1/2 Correction Register" hexmask.long.word 0x8 0.--15. 1. "CCM,Scaling factor: multiplication value in s4.12 format" line.long 0xC "CCM2_CAM0,Camera 0 Color 3 Correction Register" hexmask.long.word 0xC 0.--15. 1. "CCM,Scaling factor: multiplication value in s4.12 format" line.long 0x10 "CCM0_TH_CAM0,Camera 0 IR channel to channel 0 (Red) Crosstalk Threshold Register" hexmask.long.tbyte 0x10 0.--19. 1. "THRESHOLD,Threshold: Pixel with higher values than the threshold are treated as saturated and crosstalk removal is not performed" line.long 0x14 "CCM1_TH_CAM0,Camera 0 IR channel to channel 1 (Green) Crosstalk Threshold Register" hexmask.long.tbyte 0x14 0.--19. 1. "THRESHOLD,Threshold: Pixel with higher values than the threshold are treated as saturated and crosstalk removal is not performed" line.long 0x18 "CCM2_TH_CAM0,Camera 0 IR channel to channel 2 (Blue) Crosstalk Threshold Register" hexmask.long.tbyte 0x18 0.--19. 1. "THRESHOLD,Threshold: Pixel with higher values than the threshold are treated as saturated and crosstalk removal is not performed" group.long 0x20++0x1F line.long 0x0 "ROI0_POS_CAM0,Camera 0 Statistics Region of Interest 0 Position Register" hexmask.long.word 0x0 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI0." hexmask.long.word 0x0 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI0." line.long 0x4 "ROI0_SIZE_CAM0,Camera 0 Statistics Region of Interest 0 Size Register" hexmask.long.word 0x4 16.--31. 1. "HEIGHT,Vertical height: Provide the vertical height of the ROI0." hexmask.long.word 0x4 0.--15. 1. "WIDTH,Horizontal width: Provide the horizontal width of the ROI0." line.long 0x8 "ROI1_POS_CAM0,Camera 0 Statistics Region of Interest 1 Position Register" hexmask.long.word 0x8 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI1." hexmask.long.word 0x8 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI1." line.long 0xC "ROI1_SIZE_CAM0,Camera 0 Statistics Region of Interest 1 Size Register" hexmask.long.word 0xC 16.--31. 1. "HEIGHT,Vertical height: Provides the vertical height of the ROI1." hexmask.long.word 0xC 0.--15. 1. "WIDTH,Horizontal width: Provides the horizontal width of the ROI1." line.long 0x10 "HIST0_CTRL_CAM0,Camera 0 RGBIR Histogram 0 Control Register" hexmask.long.word 0x10 16.--31. 1. "OFFSET,Black level offset: black level correction offset for each pixel before performing histogram bin index determination" hexmask.long.byte 0x10 8.--11. 1. "CHANNEL,Channel: Binary value of channel for binning on respective histogram" newline bitfld.long 0x10 2. "PATTERN,1x1 vs 2x2: for locating the neighbouring pixel (horizontally only) define whether a 1x1 or 2x2 pattern" "0: 1x1: Neighbouring pixel is 1 position to the left,1: 2x2: Neighbouring pixel is 2 position to the left" bitfld.long 0x10 1. "DIR_VS_DIF,Direct vs Difference" "0: Direct: After correcting the black level offset..,1: Difference: After correcting the black level.." newline bitfld.long 0x10 0. "LIN_VS_LOG,Linear vs Logarithmic" "0: Linear: Scaled pixel value provides the bin..,1: Logarithmic: Log operation is performed scaled.." line.long 0x14 "HIST0_SCALE_CAM0,Camera 0 RGBIR Histogram 0 Scale Register" hexmask.long.tbyte 0x14 0.--23. 1. "SCALE,Scaling factor: gain factor on the input pixel for bin determination" line.long 0x18 "HIST1_CTRL_CAM0,Camera 0 RGBIR Histogram 1 Control Register" hexmask.long.word 0x18 16.--31. 1. "OFFSET,Black level offset: black level correction offset for each pixel before performing histogram bin index determination" hexmask.long.byte 0x18 8.--11. 1. "CHANNEL,Channel: Binary value of channel for binning on respective histogram" newline bitfld.long 0x18 2. "PATTERN,1x1 vs 2x2: for locating the neighbouring pixel (horizontally only) define whether a 1x1 or 2x2 pattern" "0: 1x1: Neighbouring pixel is 1 position to the left,1: 2x2: Neighbouring pixel is 2 position to the left" bitfld.long 0x18 1. "DIR_VS_DIF,Direct vs Difference" "0: Direct: After correcting the black level offset..,1: Difference: After correcting the black level.." newline bitfld.long 0x18 0. "LIN_VS_LOG,Linear vs Logarithmic" "0: Linear: Scaled pixel value provides the bin..,1: Logarithmic: Log operation is performed scaled.." line.long 0x1C "HIST1_SCALE_CAM0,Camera 0 RGBIR Histogram 1 Scale Register" hexmask.long.tbyte 0x1C 0.--23. 1. "SCALE,Scaling factor: gain factor on the input pixel for bin determination" tree.end tree "STAT" base ad:0x4AE00700 group.long 0x0++0xF line.long 0x0 "ROI0_POS_CAM0,Camera 0 Statistics Region of Interest 0 Position Register" hexmask.long.word 0x0 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI0." hexmask.long.word 0x0 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI0." line.long 0x4 "ROI0_SIZE_CAM0,Camera 0 Statistics Region of Interest 0 Size Register" hexmask.long.word 0x4 16.--31. 1. "HEIGHT,Vertical height: Provide the vertical height of the ROI0." hexmask.long.word 0x4 0.--15. 1. "WIDTH,Horizontal width: Provide the horizontal width of the ROI0." line.long 0x8 "ROI1_POS_CAM0,Camera 0 Statistics Region of Interest 1 Position Register" hexmask.long.word 0x8 16.--31. 1. "YPOS,Vertical position: Provides the vertical start position (line number) of the ROI1." hexmask.long.word 0x8 0.--15. 1. "XPOS,Horizontal position: Provides the horizontal start position (pixel number) of the ROI1." line.long 0xC "ROI1_SIZE_CAM0,Camera 0 Statistics Region of Interest 1 Size Register" hexmask.long.word 0xC 16.--31. 1. "HEIGHT,Vertical height: Provides the vertical height of the ROI1." hexmask.long.word 0xC 0.--15. 1. "WIDTH,Horizontal width: Provides the horizontal width of the ROI1." group.long 0x20++0x1F line.long 0x0 "HIST0_CTRL_CAM0,Camera 0 Histogram 0 Control Register" hexmask.long.word 0x0 16.--31. 1. "OFFSET,Black level offset: black level correction offset for each pixel before performing histogram bin index determination" hexmask.long.byte 0x0 8.--11. 1. "CHANNEL,Channel: Binary value of channel for binning on respective histogram." newline bitfld.long 0x0 2. "PATTERN,1x1 vs 2x2: for locating the neighbouring pixel (horizontally only) define whether a 1x1 or 2x2 pattern" "0: 1x1: Neighbouring pixel is 1 position to the left,1: 2x2: Neighbouring pixel is 2 position to the left" bitfld.long 0x0 1. "DIR_VS_DIF,Direct vs Difference" "0: Direct: Use pixel value for correcting the black..,1: Difference: Use difference with neighbouring.." newline bitfld.long 0x0 0. "LIN_VS_LOG,Linear vs Logarithmic" "0: Linear: Scaled pixel value provides the bin..,1: Logarithmic: Log operation is performed scaled.." line.long 0x4 "HIST0_SCALE_CAM0,Camera 0 Histogram 0 Scale Register" hexmask.long.tbyte 0x4 0.--23. 1. "SCALE,Scaling factor: gain factor on the input pixel for bin determination" line.long 0x8 "HIST1_CTRL_CAM0,Camera 0 Histogram 1 Control Register" hexmask.long.word 0x8 16.--31. 1. "OFFSET,Black level offset: black level correction offset for each pixel before performing histogram bin index determination" hexmask.long.byte 0x8 8.--11. 1. "CHANNEL,Channel: Binary value of channel for binning on respective histogram." newline bitfld.long 0x8 2. "PATTERN,1x1 vs 2x2: for locating the neighbouring pixel (horizontally only) define whether a 1x1 or 2x2 pattern" "0: 1x1: Neighbouring pixel is 1 position to the left,1: 2x2: Neighbouring pixel is 2 position to the left" bitfld.long 0x8 1. "DIR_VS_DIF,Direct vs Difference" "0: Direct: Use pixel value for correcting the black..,1: Difference: Use difference with neighbouring.." newline bitfld.long 0x8 0. "LIN_VS_LOG,Linear vs Logarithmic" "0: Linear: Scaled pixel value provides the bin..,1: Logarithmic: Log operation is performed scaled.." line.long 0xC "HIST1_SCALE_CAM0,Camera 0 Histogram 1 Scale Register" hexmask.long.tbyte 0xC 0.--23. 1. "SCALE,Scaling factor: gain factor on the input pixel for bin determination" line.long 0x10 "HIST2_CTRL_CAM0,Camera 0 Histogram 2 Control Register" hexmask.long.word 0x10 16.--31. 1. "OFFSET,Black level offset: black level correction offset for each pixel before performing histogram bin index determination" hexmask.long.byte 0x10 8.--11. 1. "CHANNEL,Channel: Binary value of channel for binning on respective histogram." newline bitfld.long 0x10 2. "PATTERN,1x1 vs 2x2: for locating the neighbouring pixel (horizontally only) define whether a 1x1 or 2x2 pattern" "0: 1x1: Neighbouring pixel is 1 position to the left,1: 2x2: Neighbouring pixel is 2 position to the left" bitfld.long 0x10 1. "DIR_VS_DIF,Direct vs Difference" "0: Direct: Use pixel value for correcting the black..,1: Difference: Use difference with neighbouring.." newline bitfld.long 0x10 0. "LIN_VS_LOG,Linear vs Logarithmic" "0: Linear: Scaled pixel value provides the bin..,1: Logarithmic: Log operation is performed scaled.." line.long 0x14 "HIST2_SCALE_CAM0,Camera 0 Histogram 2 Scale Register" hexmask.long.tbyte 0x14 0.--23. 1. "SCALE,Scaling factor: gain factor on the input pixel for bin determination" line.long 0x18 "HIST3_CTRL_CAM0,Camera 0 Histogram 3 Control Register" hexmask.long.word 0x18 16.--31. 1. "OFFSET,Black level offset: black level correction offset for each pixel before performing histogram bin index determination" hexmask.long.byte 0x18 8.--11. 1. "CHANNEL,Channel: Binary value of channel for binning on respective histogram." newline bitfld.long 0x18 2. "PATTERN,1x1 vs 2x2: for locating the neighbouring pixel (horizontally only) define whether a 1x1 or 2x2 pattern" "0: 1x1: Neighbouring pixel is 1 position to the left,1: 2x2: Neighbouring pixel is 2 position to the left" bitfld.long 0x18 1. "DIR_VS_DIF,Direct vs Difference" "0: Direct: Use pixel value for correcting the black..,1: Difference: Use difference with neighbouring.." newline bitfld.long 0x18 0. "LIN_VS_LOG,Linear vs Logarithmic" "0: Linear: Scaled pixel value provides the bin..,1: Logarithmic: Log operation is performed scaled.." line.long 0x1C "HIST3_SCALE_CAM0,Camera 0 Histogram 3 Scale Register" hexmask.long.tbyte 0x1C 0.--23. 1. "SCALE,Scaling factor: gain factor on the input pixel for bin determination" tree.end tree "VIGNETTING" base ad:0x4AE00900 group.long 0x0++0x13 line.long 0x0 "CTRL_CAM0,Camera 0 VIGNETTING Control Register" bitfld.long 0x0 31. "ENABLE,Enable: This field controls the enabling or disabling of the Vignetting unit for respective camera context" "0: Disabled; the input pixels are passed unchanged..,1: Enabled" line.long 0x4 "BLK_CONF_CAM0,Camera 0 Block Configuration Register" hexmask.long.byte 0x4 16.--23. 1. "ROWS,Block rows: Provides number of rows into which the input image is partitioned." hexmask.long.byte 0x4 0.--7. 1. "COLS,Block Columns: Provides number of columns into which the input image is partitioned." line.long 0x8 "BLK_SIZE_CAM0,Camera 0 Block Size Register" hexmask.long.word 0x8 16.--31. 1. "YSIZE,Y Size: Provides number of rows per block. Should always be multiple of 2." hexmask.long.word 0x8 0.--15. 1. "XSIZE,X Size: Provides number of pixels per block." line.long 0xC "BLK_STEPY_CAM0,Camera 0 Block Y Step Register" hexmask.long.word 0xC 0.--15. 1. "STEP,Y Step: Vertical scaling factor specified in u0.16 format." line.long 0x10 "BLK_STEPX_CAM0,Camera 0 Block X Step Register" hexmask.long.word 0x10 0.--15. 1. "STEP,X Step: Horizontal scaling factor specified in u0.16 format." rgroup.long 0x20++0xB line.long 0x0 "BLK_C_LINE_CAM0,Camera 0 Current Line Inside Block Register" hexmask.long.word 0x0 0.--15. 1. "LINE,Current Line inside Block" line.long 0x4 "BLK_C_ROW_CAM0,Camera 0 Current Block Row Register" hexmask.long.byte 0x4 0.--7. 1. "BLKROW,Current block row" line.long 0x8 "BLK_C_FRACY_CAM0,Camera 0 Current Y Step Register" hexmask.long 0x8 0.--31. 1. "FRAC,Current Y scaling factor Value is in u16.16 format." tree.end tree.end tree "CAMERA_MIPI_CSI2" base ad:0x4AD30000 rgroup.long 0x0++0x3 line.long 0x0 "VERSION,Core version." hexmask.long 0x0 0.--31. 1. "version,This field indicates the version of the MIPI CSI-2 host controller." group.long 0x4++0x7 line.long 0x0 "N_LANES,Number of lanes." bitfld.long 0x0 0.--2. "n_lanes,Number of active data lanes." "0: 1 Data Lane,1: 2 Data Lanes,2: 3 Data Lanes,3: 4 Data Lanes,?,?,?,?" line.long 0x4 "CSI2_RESETN,Logic Reset." bitfld.long 0x4 0. "csi2_resetn,MIPI CSI-2 host controller reset." "0: Put the CSI-2 internal logic in the reset state.,1: Release the CSI-2 internal logic from the reset.." rgroup.long 0xC++0x3 line.long 0x0 "INT_ST_MAIN,Main interrupt status." bitfld.long 0x0 17. "status_int_st_line,Status of int_st_line" "0: No error.,1: An interrupt source in INT_ST_LINE is set." newline bitfld.long 0x0 16. "status_int_st_phy,Status of int_st_phy." "0: No error.,1: An interrupt source in INT_ST_PHY is set." newline bitfld.long 0x0 7. "status_int_st_ecc_corrected,Status of int_st_ecc_corrected." "0: No error.,1: An interrupt source in INT_ST_ECC_CORRECTED is.." newline bitfld.long 0x0 6. "status_int_st_data_id,Status of int_st_data_id." "0: No error.,1: An interrupt source in INT_ST_DATA_ID is set." newline bitfld.long 0x0 5. "status_int_st_pld_crc_fatal,Status of int_st_pld_crc_fatal." "0: No error.,1: An interrupt source in INT_ST_PLD_CRC_FATAL is.." newline bitfld.long 0x0 4. "status_int_st_crc_frame_fatal,Status of int_st_crc_frame_fatal." "0: No error.,1: An interrupt source in INT_ST_CRC_FRAME_FATAL is.." newline bitfld.long 0x0 3. "status_int_st_seq_frame_fatal,Status of int_st_seq_frame_fatal." "0: No error.,1: An interrupt source in INT_ST_SEQ_FRAME_FATAL is.." newline bitfld.long 0x0 2. "status_int_st_bndry_frame_fatal,Status of int_st_bndry_frame_fatal." "0: No error.,1: An interrupt source in INT_ST_BNDRY_FRAME_FATAL.." newline bitfld.long 0x0 1. "status_int_st_pkt_fatal,Status of int_st_pkt_fatal." "0: No error.,1: An interrupt source in INT_ST_PKT_FATAL is set." newline bitfld.long 0x0 0. "status_int_st_phy_fatal,Status of int_st_phy_fatal." "0: No error.,1: An interrupt source in INT_ST_PHY_FATAL is set." group.long 0x10++0x7 line.long 0x0 "DATA_IDS_1,Data Type fields for Data ID Monitors 1." hexmask.long.byte 0x0 24.--29. 1. "di3_dt,Data type for programmed data ID 3." newline hexmask.long.byte 0x0 16.--21. 1. "di2_dt,Data type for programmed Data ID 2." newline hexmask.long.byte 0x0 8.--13. 1. "di1_dt,Data type for programmed data ID 1." newline hexmask.long.byte 0x0 0.--5. 1. "di0_dt,Data type for programmed data ID 0." line.long 0x4 "DATA_IDS_2,Data Type fields for Data ID Monitors 2." hexmask.long.byte 0x4 24.--29. 1. "di7_dt,Data type for programmed data ID 7." newline hexmask.long.byte 0x4 16.--21. 1. "di6_dt,Data type for programmed data ID 6." newline hexmask.long.byte 0x4 8.--13. 1. "di5_dt,Data type for programmed data ID 5." newline hexmask.long.byte 0x4 0.--5. 1. "di4_dt,Data type for programmed data ID 4." group.long 0x30++0x7 line.long 0x0 "DATA_IDS_VC_1,Virtual Channel fields for Data ID Monitors 1." bitfld.long 0x0 26.--27. "di3_vcx_0_1,Virtual channel extension for programmed data ID 3." "0,1,2,3" newline bitfld.long 0x0 24.--25. "di3_vc,Virtual channel for programmed data ID 3." "0,1,2,3" newline bitfld.long 0x0 18.--19. "di2_vcx_0_1,Virtual channel extension for programmed data ID 2." "0,1,2,3" newline bitfld.long 0x0 16.--17. "di2_vc,Virtual channel for programmed data ID 2." "0,1,2,3" newline bitfld.long 0x0 10.--11. "di1_vcx_0_1,Virtual channel extension for programmed data ID 1." "0,1,2,3" newline bitfld.long 0x0 8.--9. "di1_vc,Virtual channel for programmed data ID 1." "0,1,2,3" newline bitfld.long 0x0 2.--3. "di0_vcx_0_1,Virtual channel extension for programmed data ID 0." "0,1,2,3" newline bitfld.long 0x0 0.--1. "di0_vc,Virtual channel for programmed data ID 0." "0,1,2,3" line.long 0x4 "DATA_IDS_VC_2,Virtual Channel fields for Data ID Monitors 2." bitfld.long 0x4 26.--27. "di7_vcx_0_1,Virtual channel extension for programmed data ID 7." "0,1,2,3" newline bitfld.long 0x4 24.--25. "di7_vc,Virtual channel for programmed data ID 7." "0,1,2,3" newline bitfld.long 0x4 18.--19. "di6_vcx_0_1,Virtual channel extension for programmed data ID 6." "0,1,2,3" newline bitfld.long 0x4 16.--17. "di6_vc,Virtual channel for programmed data ID 6." "0,1,2,3" newline bitfld.long 0x4 10.--11. "di5_vcx_0_1,Virtual channel extension for programmed data ID 5." "0,1,2,3" newline bitfld.long 0x4 8.--9. "di5_vc,Virtual channel for programmed data ID 5." "0,1,2,3" newline bitfld.long 0x4 2.--3. "di4_vcx_0_1,Virtual channel extension for programmed data ID 4." "0,1,2,3" newline bitfld.long 0x4 0.--1. "di4_vc,Virtual channel for programmed data ID 4." "0,1,2,3" group.long 0x40++0x7 line.long 0x0 "PHY_SHUTDOWNZ,PHY Shutdown." bitfld.long 0x0 0. "phy_shutdownz,Shutdown input." "0: Enter power down mode.,1: Exit from power down mode." line.long 0x4 "DPHY_RSTZ,DPHY reset." bitfld.long 0x4 0. "dphy_rstz,PHY reset." "0: Put PHY in reset.,1: Release PHY from reset." rgroup.long 0x48++0x7 line.long 0x0 "PHY_RX,RX PHY status." bitfld.long 0x0 17. "phy_rxclkactivehs,Indicates that D-PHY clock lane is actively receiving a DDR clock" "0: No clock signal is received in the clock lane.,1: High-speed clock signal is received in clock lane." newline bitfld.long 0x0 16. "phy_rxulpsclknot,Indicates that D-PHY Clock Lane module has entered the Ultra Low Power state." "0: Clock lane is detected in ULPM.,1: Clock lane is not in ULPM." newline bitfld.long 0x0 3. "phy_rxulpsesc_3,Lane module 3 has entered the Ultra Low Power mode" "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." newline bitfld.long 0x0 2. "phy_rxulpsesc_2,Lane module 2 has entered the Ultra Low Power mode" "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." newline bitfld.long 0x0 1. "phy_rxulpsesc_1,Lane module 1 has entered the Ultra Low Power mode" "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." newline bitfld.long 0x0 0. "phy_rxulpsesc_0,Lane module 0 has entered the Ultra Low Power mode." "0: Data lane is not in ULPM.,1: Data lane has entered ULPM." line.long 0x4 "PHY_STOPSTATE,STOPSTATE PHY status." bitfld.long 0x4 16. "phy_stopstateclk,D-PHY Clock lane in Stop state" "0: Clock lane is not in Stop state.,1: Clock lane is in Stop state." newline bitfld.long 0x4 3. "phy_stopstatedata_3,Data lane 3 in Stop state" "0: Data lane is not in Stop state.,1: Data lane is in Stop state." newline bitfld.long 0x4 2. "phy_stopstatedata_2,Data lane 2 in Stop state" "0: Data lane is not in Stop state.,1: Data lane is in Stop state." newline bitfld.long 0x4 1. "phy_stopstatedata_1,Data lane 1 in Stop state" "0: Data lane is not in Stop state.,1: Data lane is in Stop state." newline bitfld.long 0x4 0. "phy_stopstatedata_0,Data lane 0 in Stop state." "0: Data lane is not in Stop state.,1: Data lane is in Stop state." group.long 0x50++0x7 line.long 0x0 "PHY_TEST_CTRL0,D-PHY Test and Control interface 0." bitfld.long 0x0 1. "phy_testclk,Clock to capture testdin bus contents into the module with testen signal controlling the operation selection." "0,1" newline bitfld.long 0x0 0. "phy_testclr,Performs vendor specific interface initialization." "0,1" line.long 0x4 "PHY_TEST_CTRL1,D-PHY Test and Control interface 1." bitfld.long 0x4 16. "phy_testen,Data write on the rising edge of TESTCLK or address write on the falling edge of TESTCLK" "0: Configures a data write operation on the rising..,1: Configures an address write operation on the.." newline hexmask.long.byte 0x4 8.--15. 1. "phy_testdout,Vendor-specific 8-bit data output for reading data and other probing functionalities." newline hexmask.long.byte 0x4 0.--7. 1. "phy_testdin,Test interface 8-bit data input for programming internal registers and accessing test functionalities." group.long 0xC8++0x3 line.long 0x0 "VC_EXTENSION,Virtual Channel Extension." bitfld.long 0x0 0. "vcx,Virtual channel extension" "0: Virtual channel extension is enabled.,1: Legacy mode. Virtual channel extension is.." rgroup.long 0xCC++0x3 line.long 0x0 "PHY_CAL,PHY Calibration." bitfld.long 0x0 0. "rxskewcalhs,A low-to-high transition on rxskewcalhs signal means that the PHY has initiated the de-skew calibration." "0: No calibration.,1: PHY has initiated the de-skew calibration." rgroup.long 0xE0++0x3 line.long 0x0 "INT_ST_PHY_FATAL,Fatal interruption caused by PHY." bitfld.long 0x0 3. "phy_errsotsynchs_3,Start of transmission error on data lane 3 (no synchronization achieved)" "0: No error,1: Start of transmission error on data lane 3" newline bitfld.long 0x0 2. "phy_errsotsynchs_2,Start of transmission error on data lane 2 (no synchronization achieved)" "0: No error,1: Start of transmission error on data lane 2" newline bitfld.long 0x0 1. "phy_errsotsynchs_1,Start of transmission error on data lane 1 (no synchronization achieved)" "0: No error,1: Start of transmission error on data lane 1" newline bitfld.long 0x0 0. "phy_errsotsynchs_0,Start of transmission error on data lane 0 (no synchronization achieved)." "0: No error,1: Start of transmission error on data lane 0" group.long 0xE4++0x7 line.long 0x0 "INT_MSK_PHY_FATAL,Mask for fatal interruption caused by PHY." bitfld.long 0x0 3. "mask_phy_errsotsynchs_3,Mask for phy_errsotsynchs_3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "mask_phy_errsotsynchs_2,Mask for phy_errsotsynchs_2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "mask_phy_errsotsynchs_1,Mask for phy_errsotsynchs_1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_phy_errsotsynchs_0,Mask for phy_errsotsynchs_0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PHY_FATAL,Force for fatal interruption caused by PHY." bitfld.long 0x4 3. "force_phy_errsotsynchs_3,Force phy_errsotsynchs_3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "force_phy_errsotsynchs_2,Force phy_errsotsynchs_2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "force_phy_errsotsynchs_1,Force phy_errsotsynchs_1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_phy_errsotsynchs_0,Force phy_errsotsynchs_0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0xF0++0x3 line.long 0x0 "INT_ST_PKT_FATAL,Fatal interruption caused during Packet Construction." bitfld.long 0x0 1. "shorter_payload,Reported greater WC than received unrecoverable." "0: No error.,1: Reported greater Word Count than received.." newline bitfld.long 0x0 0. "err_ecc_double,Header ECC contains at least 2 errors unrecoverable." "0: No error.,1: Header ECC contains at least 2 errors.." group.long 0xF4++0x7 line.long 0x0 "INT_MSK_PKT_FATAL,Mask for fatal interruption caused during Packet Construction." bitfld.long 0x0 1. "mask_shorter_payload,Mask for shorter_payload." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_err_ecc_double,Mask for err_ecc_double." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PKT_FATAL,Force for fatal interruption caused during Packet Construction." bitfld.long 0x4 1. "force_shorter_payload,Force shorter_payload." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_err_ecc_double,Force err_ecc_double." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x110++0x3 line.long 0x0 "INT_ST_PHY,Interruption caused by PHY." bitfld.long 0x0 19. "phy_erresc_3,Escape Entry Error on data lane 3" "0: No error,1: Escape entry error on data lane 3" newline bitfld.long 0x0 18. "phy_erresc_2,Escape Entry Error on data lane 2" "0: No error,1: Escape entry error on data lane 2" newline bitfld.long 0x0 17. "phy_erresc_1,Escape Entry Error on data lane 1" "0: No error,1: Escape entry error on data lane 1" newline bitfld.long 0x0 16. "phy_erresc_0,Escape Entry Error on data lane 0." "0: No error,1: Escape entry error on data lane 0" newline bitfld.long 0x0 3. "phy_errsoths_3,Start of transmission error on data lane 3 (synchronization can still be achieved)" "0: No error,1: Start of transmission error on data lane 3" newline bitfld.long 0x0 2. "phy_errsoths_2,Start of transmission error on data lane 2 (synchronization can still be achieved)" "0: No error,1: Start of transmission error on data lane 2" newline bitfld.long 0x0 1. "phy_errsoths_1,Start of transmission error on data lane 1 (synchronization can still be achieved)" "0: No error,1: Start of transmission error on data lane 1" newline bitfld.long 0x0 0. "phy_errsoths_0,Start of transmission error on data lane 0 (synchronization can still be achieved)." "0: No error,1: Start of transmission error on data lane 0" group.long 0x114++0x7 line.long 0x0 "INT_MSK_PHY,Mask for interruption caused by PHY." bitfld.long 0x0 19. "mask_phy_erresc_3,Mask for phy_erresc_3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 18. "mask_phy_erresc_2,Mask for phy_erresc_2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 17. "mask_phy_erresc_1,Mask for phy_erresc_1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 16. "mask_phy_erresc_0,Mask for phy_erresc_0." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "mask_phy_errsoths_3,Mask for phy_errsoths_3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "mask_phy_errsoths_2,Mask for phy_errsoths_2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "mask_phy_errsoths_1,Mask for phy_errsoths_1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_phy_errsoths_0,Mask for phy_errsoths_0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PHY,Force for interruption caused by PHY." bitfld.long 0x4 19. "force_phy_erresc_3,Force phy_erresc_3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 18. "force_phy_erresc_2,Force phy_erresc_2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 17. "force_phy_erresc_1,Force phy_erresc_1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 16. "force_phy_erresc_0,Force phy_erresc_0" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "force_phy_errsoths_3,Force phy_errsoths_3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "force_phy_errsoths_2,Force phy_errsoths_2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "force_phy_errsoths_1,Force phy_errsoths_1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_phy_errsoths_0,Force phy_errsoths_0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x130++0x3 line.long 0x0 "INT_ST_LINE,Interruption occurred during Line construction." bitfld.long 0x0 23. "err_l_seq_di7,Error in the sequence of lines for vc7 and dt7" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 22. "err_l_seq_di6,Error in the sequence of lines for vc6 and dt6" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 21. "err_l_seq_di5,Error in the sequence of lines for vc5 and dt5" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 20. "err_l_seq_di4,Error in the sequence of lines for vc4 and dt4" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 19. "err_l_seq_di3,Error in the sequence of lines for vc3 and dt3" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 18. "err_l_seq_di2,Error in the sequence of lines for vc2 and dt2" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 17. "err_l_seq_di1,Error in the sequence of lines for vc1 and dt1" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 16. "err_l_seq_di0,Error in the sequence of lines for vc0 and dt0" "0: No error.,1: Line sequence error occurred." newline bitfld.long 0x0 7. "err_l_bndry_match_di7,Error matching line start with line end for vc7 and dt7" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 6. "err_l_bndry_match_di6,Error matching line start with line end for vc6 and dt6" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 5. "err_l_bndry_match_di5,Error matching line start with line end for vc5 and dt5" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 4. "err_l_bndry_match_di4,Error matching line start with line end for vc4 and dt4" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 3. "err_l_bndry_match_di3,Error matching line start with line end for vc3 and dt3" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 2. "err_l_bndry_match_di2,Error matching line start with line end for vc2 and dt2" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 1. "err_l_bndry_match_di1,Error matching line start with line end for vc1 and dt1" "0: No error.,1: Line start and line end mismatch error occurred." newline bitfld.long 0x0 0. "err_l_bndry_match_di0,Error matching line start with line end for vc0 and dt0" "0: No error.,1: Line start and line end mismatch error occurred." group.long 0x134++0x7 line.long 0x0 "INT_MSK_LINE,Mask for interruption occurred during Line construction." bitfld.long 0x0 23. "mask_err_l_seq_di7,Mask for err_l_seq_di7" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 22. "mask_err_l_seq_di6,Mask for err_l_seq_di6" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 21. "mask_err_l_seq_di5,Mask for err_l_seq_di5" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 20. "mask_err_l_seq_di4,Mask for err_l_seq_di4" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 19. "mask_err_l_seq_di3,Mask for err_l_seq_di3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 18. "mask_err_l_seq_di2,Mask for err_l_seq_di2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 17. "mask_err_l_seq_di1,Mask for err_l_seq_di1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 16. "mask_err_l_seq_di0,Mask for err_l_seq_di0" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "mask_err_l_bndry_match_di7,Mask for err_l_bndry_match_di7" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "mask_err_l_bndry_match_di6,Mask for err_l_bndry_match_di6" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "mask_err_l_bndry_match_di5,Mask for err_l_bndry_match_di5" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "mask_err_l_bndry_match_di4,Mask for err_l_bndry_match_di4" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "mask_err_l_bndry_match_di3,Mask for err_l_bndry_match_di3" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "mask_err_l_bndry_match_di2,Mask for err_l_bndry_match_di2" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "mask_err_l_bndry_match_di1,Mask for err_l_bndry_match_di1" "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "mask_err_l_bndry_match_di0,Mask for err_l_bndry_match_di0" "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_LINE,Force for interruption occurred during Line construction." bitfld.long 0x4 23. "force_err_l_seq_di7,Force err_l_seq_di7" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 22. "force_err_l_seq_di6,Force err_l_seq_di6" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 21. "force_err_l_seq_di5,Force err_l_seq_di5" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 20. "force_err_l_seq_di4,Force err_l_seq_di4" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 19. "force_err_l_seq_di3,Force err_l_seq_di3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 18. "force_err_l_seq_di2,Force err_l_seq_di2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 17. "force_err_l_seq_di1,Force err_l_seq_di1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 16. "force_err_l_seq_di0,Force err_l_seq_di0" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "force_err_l_bndry_match_di7,Force err_l_bndry_match_di7" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "force_err_l_bndry_match_di6,Force err_l_bndry_match_di6" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "force_err_l_bndry_match_di5,Force err_l_bndry_match_di5" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "force_err_l_bndry_match_di4,Force err_l_bndry_match_di4" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "force_err_l_bndry_match_di3,Force err_l_bndry_match_di3" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "force_err_l_bndry_match_di2,Force err_l_bndry_match_di2" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "force_err_l_bndry_match_di1,Force err_l_bndry_match_di1" "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "force_err_l_bndry_match_di0,Force err_l_bndry_match_di0" "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x280++0x3 line.long 0x0 "INT_ST_BNDRY_FRAME_FATAL,Fatal Interruption caused by Frame Boundaries." bitfld.long 0x0 15. "err_f_bndry_match_vc15,Error matching Frame Start with Frame End for virtual channel 15." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 14. "err_f_bndry_match_vc14,Error matching Frame Start with Frame End for virtual channel 14." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 13. "err_f_bndry_match_vc13,Error matching Frame Start with Frame End for virtual channel 13." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 12. "err_f_bndry_match_vc12,Error matching Frame Start with Frame End for virtual channel 12." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 11. "err_f_bndry_match_vc11,Error matching Frame Start with Frame End for virtual channel 11." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 10. "err_f_bndry_match_vc10,Error matching Frame Start with Frame End for virtual channel 10." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 9. "err_f_bndry_match_vc9,Error matching Frame Start with Frame End for virtual channel 9." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 8. "err_f_bndry_match_vc8,Error matching Frame Start with Frame End for virtual channel 8." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 7. "err_f_bndry_match_vc7,Error matching Frame Start with Frame End for virtual channel 7." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 6. "err_f_bndry_match_vc6,Error matching Frame Start with Frame End for virtual channel 6." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 5. "err_f_bndry_match_vc5,Error matching Frame Start with Frame End for virtual channel 5." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 4. "err_f_bndry_match_vc4,Error matching Frame Start with Frame End for virtual channel 4." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 3. "err_f_bndry_match_vc3,Error matching Frame Start with Frame End for virtual channel 3." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 2. "err_f_bndry_match_vc2,Error matching Frame Start with Frame End for virtual channel 2." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 1. "err_f_bndry_match_vc1,Error matching Frame Start with Frame End for virtual channel 1." "0: No error.,1: Matching frame start with frame end error is.." newline bitfld.long 0x0 0. "err_f_bndry_match_vc0,Error matching Frame Start with Frame End for virtual channel 0." "0: No error.,1: Matching frame start with frame end error is.." group.long 0x284++0x7 line.long 0x0 "INT_MSK_BNDRY_FRAME_FATAL,Mask for fatal interruption caused by Frame Boundaries." bitfld.long 0x0 15. "err_f_bndry_match_vc15,Mask for err_f_bndry_match_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_f_bndry_match_vc14,Mask for err_f_bndry_match_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_f_bndry_match_vc13,Mask for err_f_bndry_match_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_f_bndry_match_vc12,Mask for err_f_bndry_match_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_f_bndry_match_vc11,Mask for err_f_bndry_match_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_f_bndry_match_vc10,Mask for err_f_bndry_match_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_f_bndry_match_vc9,Mask for err_f_bndry_match_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_f_bndry_match_vc8,Mask for err_f_bndry_match_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_f_bndry_match_vc7,Mask for err_f_bndry_match_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_f_bndry_match_vc6,Mask for err_f_bndry_match_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_f_bndry_match_vc5,Mask for err_f_bndry_match_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_f_bndry_match_vc4,Mask for err_f_bndry_match_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_f_bndry_match_vc3,Mask for err_f_bndry_match_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_f_bndry_match_vc2,Mask for err_f_bndry_match_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_f_bndry_match_vc1,Mask for err_f_bndry_match_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_f_bndry_match_vc0,Mask for err_f_bndry_match_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_BNDRY_FRAME_FATAL,Force for fatal interruption caused by Frame Boundaries." bitfld.long 0x4 15. "err_f_bndry_match_vc15,Force err_f_bndry_match_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_f_bndry_match_vc14,Force err_f_bndry_match_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_f_bndry_match_vc13,Force err_f_bndry_match_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_f_bndry_match_vc12,Force err_f_bndry_match_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_f_bndry_match_vc11,Force err_f_bndry_match_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_f_bndry_match_vc10,Force err_f_bndry_match_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_f_bndry_match_vc9,Force err_f_bndry_match_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_f_bndry_match_vc8,Force err_f_bndry_match_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_f_bndry_match_vc7,Force err_f_bndry_match_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_f_bndry_match_vc6,Force err_f_bndry_match_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_f_bndry_match_vc5,Force err_f_bndry_match_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_f_bndry_match_vc4,Force err_f_bndry_match_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_f_bndry_match_vc3,Force err_f_bndry_match_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_f_bndry_match_vc2,Force err_f_bndry_match_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_f_bndry_match_vc1,Force err_f_bndry_match_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_f_bndry_match_vc0,Force err_f_bndry_match_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x290++0x3 line.long 0x0 "INT_ST_SEQ_FRAME_FATAL,Fatal Interruption caused by Frame Sequence." bitfld.long 0x0 15. "err_f_seq_vc15,Incorrect Frame sequence detected in virtual channel 15." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 14. "err_f_seq_vc14,Incorrect Frame sequence detected in virtual channel 14." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 13. "err_f_seq_vc13,Incorrect Frame sequence detected in virtual channel 13." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 12. "err_f_seq_vc12,Incorrect Frame sequence detected in virtual channel 12." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 11. "err_f_seq_vc11,Incorrect Frame sequence detected in virtual channel 11." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 10. "err_f_seq_vc10,Incorrect Frame sequence detected in virtual channel 10." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 9. "err_f_seq_vc9,Incorrect Frame sequence detected in virtual channel 9." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 8. "err_f_seq_vc8,Incorrect Frame sequence detected in virtual channel 8." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 7. "err_f_seq_vc7,Incorrect Frame sequence detected in virtual channel 7." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 6. "err_f_seq_vc6,Incorrect Frame sequence detected in virtual channel 6." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 5. "err_f_seq_vc5,Incorrect Frame sequence detected in virtual channel 5." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 4. "err_f_seq_vc4,Incorrect Frame sequence detected in virtual channel 4." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 3. "err_f_seq_vc3,Incorrect Frame sequence detected in virtual channel 3." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 2. "err_f_seq_vc2,Incorrect Frame sequence detected in virtual channel 2." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 1. "err_f_seq_vc1,Incorrect Frame sequence detected in virtual channel 1." "0: No error.,1: Incorrect frame sequence error is detected." newline bitfld.long 0x0 0. "err_f_seq_vc0,Incorrect Frame sequence detected in virtual channel 0." "0: No error.,1: Incorrect frame sequence error is detected." group.long 0x294++0x7 line.long 0x0 "INT_MSK_SEQ_FRAME_FATAL,Mask for fatal interruption caused by Frame Sequence." bitfld.long 0x0 15. "err_f_seq_vc15,Mask for err_f_seq_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_f_seq_vc14,Mask for err_f_seq_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_f_seq_vc13,Mask for err_f_seq_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_f_seq_vc12,Mask for err_f_seq_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_f_seq_vc11,Mask for err_f_seq_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_f_seq_vc10,Mask for err_f_seq_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_f_seq_vc9,Mask for err_f_seq_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_f_seq_vc8,Mask for err_f_seq_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_f_seq_vc7,Mask for err_f_seq_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_f_seq_vc6,Mask for err_f_seq_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_f_seq_vc5,Mask for err_f_seq_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_f_seq_vc4,Mask for err_f_seq_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_f_seq_vc3,Mask for err_f_seq_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_f_seq_vc2,Mask for err_f_seq_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_f_seq_vc1,Mask for err_f_seq_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_f_seq_vc0,Mask for err_f_seq_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_SEQ_FRAME_FATAL,Force for fatal interruption caused by Frame Sequence." bitfld.long 0x4 15. "err_f_seq_vc15,Force err_f_seq_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_f_seq_vc14,Force err_f_seq_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_f_seq_vc13,Force err_f_seq_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_f_seq_vc12,Force err_f_seq_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_f_seq_vc11,Force err_f_seq_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_f_seq_vc10,Force err_f_seq_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_f_seq_vc9,Force err_f_seq_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_f_seq_vc8,Force err_f_seq_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_f_seq_vc7,Force err_f_seq_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_f_seq_vc6,Force err_f_seq_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_f_seq_vc5,Force err_f_seq_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_f_seq_vc4,Force err_f_seq_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_f_seq_vc3,Force err_f_seq_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_f_seq_vc2,Force err_f_seq_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_f_seq_vc1,Force err_f_seq_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_f_seq_vc0,Force err_f_seq_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2A0++0x3 line.long 0x0 "INT_ST_CRC_FRAME_FATAL,Fatal Interruption caused by Frame CRC." bitfld.long 0x0 15. "err_frame_data_vc15,Last received Frame in virtual channel 15 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 14. "err_frame_data_vc14,Last received Frame in virtual channel 14 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 13. "err_frame_data_vc13,Last received Frame in virtual channel 13 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 12. "err_frame_data_vc12,Last received Frame in virtual channel 12 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 11. "err_frame_data_vc11,Last received Frame in virtual channel 11 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 10. "err_frame_data_vc10,Last received Frame in virtual channel 10 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 9. "err_frame_data_vc9,Last received Frame in virtual channel 9 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 8. "err_frame_data_vc8,Last received Frame in virtual channel 8 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 7. "err_frame_data_vc7,Last received Frame in virtual channel 7 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 6. "err_frame_data_vc6,Last received Frame in virtual channel 6 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 5. "err_frame_data_vc5,Last received Frame in virtual channel 5 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 4. "err_frame_data_vc4,Last received Frame in virtual channel 4 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 3. "err_frame_data_vc3,Last received Frame in virtual channel 3 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 2. "err_frame_data_vc2,Last received Frame in virtual channel 2 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 1. "err_frame_data_vc1,Last received Frame in virtual channel 1 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." newline bitfld.long 0x0 0. "err_frame_data_vc0,Last received Frame in virtual channel 0 had at least one CRC error." "0: No error.,1: Frame CRC error is detected." group.long 0x2A4++0x7 line.long 0x0 "INT_MSK_CRC_FRAME_FATAL,Mask for fatal interruption caused by Frame CRC." bitfld.long 0x0 15. "err_frame_data_vc15,Mask for err_frame_data_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_frame_data_vc14,Mask for err_frame_data_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_frame_data_vc13,Mask for err_frame_data_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_frame_data_vc12,Mask for err_frame_data_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_frame_data_vc11,Mask for err_frame_data_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_frame_data_vc10,Mask for err_frame_data_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_frame_data_vc9,Mask for err_frame_data_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_frame_data_vc8,Mask for err_frame_data_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_frame_data_vc7,Mask for err_frame_data_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_frame_data_vc6,Mask for err_frame_data_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_frame_data_vc5,Mask for err_frame_data_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_frame_data_vc4,Mask for err_frame_data_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_frame_data_vc3,Mask for err_frame_data_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_frame_data_vc2,Mask for err_frame_data_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_frame_data_vc1,Mask for err_frame_data_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_frame_data_vc0,Mask for err_frame_data_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_CRC_FRAME_FATAL,Force for fatal interruption caused by Frame CRC." bitfld.long 0x4 15. "err_frame_data_vc15,Force err_frame_data_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_frame_data_vc14,Force err_frame_data_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_frame_data_vc13,Force err_frame_data_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_frame_data_vc12,Force err_frame_data_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_frame_data_vc11,Force err_frame_data_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_frame_data_vc10,Force err_frame_data_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_frame_data_vc9,Force err_frame_data_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_frame_data_vc8,Force err_frame_data_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_frame_data_vc7,Force err_frame_data_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_frame_data_vc6,Force err_frame_data_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_frame_data_vc5,Force err_frame_data_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_frame_data_vc4,Force err_frame_data_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_frame_data_vc3,Force err_frame_data_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_frame_data_vc2,Force err_frame_data_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_frame_data_vc1,Force err_frame_data_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_frame_data_vc0,Force err_frame_data_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2B0++0x3 line.long 0x0 "INT_ST_PLD_CRC_FATAL,Fatal Interruption caused by Payload CRC." bitfld.long 0x0 15. "err_crc_vc15,Payload Checksum error detected on virtual channel 15." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 14. "err_crc_vc14,Payload Checksum error detected on virtual channel 14." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 13. "err_crc_vc13,Payload Checksum error detected on virtual channel 13." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 12. "err_crc_vc12,Payload Checksum error detected on virtual channel 12." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 11. "err_crc_vc11,Payload Checksum error detected on virtual channel 11." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 10. "err_crc_vc10,Payload Checksum error detected on virtual channel 10." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 9. "err_crc_vc9,Payload Checksum error detected on virtual channel 9." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 8. "err_crc_vc8,Payload Checksum error detected on virtual channel 8." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 7. "err_crc_vc7,Payload Checksum error detected on virtual channel 7." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 6. "err_crc_vc6,Payload Checksum error detected on virtual channel 6." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 5. "err_crc_vc5,Payload Checksum error detected on virtual channel 5." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 4. "err_crc_vc4,Payload Checksum error detected on virtual channel 4." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 3. "err_crc_vc3,Payload Checksum error detected on virtual channel 3." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 2. "err_crc_vc2,Payload Checksum error detected on virtual channel 2." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 1. "err_crc_vc1,Payload Checksum error detected on virtual channel 1." "0: No error.,1: Payload checksum error is detected." newline bitfld.long 0x0 0. "err_crc_vc0,Payload Checksum error detected on virtual channel 0." "0: No error.,1: Payload checksum error is detected." group.long 0x2B4++0x7 line.long 0x0 "INT_MSK_PLD_CRC_FATAL,Mask for fatal interruption caused by Payload CRC." bitfld.long 0x0 15. "err_crc_vc15,Mask for err_crc_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_crc_vc14,Mask for err_crc_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_crc_vc13,Mask for err_crc_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_crc_vc12,Mask for err_crc_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_crc_vc11,Mask for err_crc_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_crc_vc10,Mask for err_crc_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_crc_vc9,Mask for err_crc_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_crc_vc8,Mask for err_crc_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_crc_vc7,Mask for err_crc_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_crc_vc6,Mask for err_crc_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_crc_vc5,Mask for err_crc_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_crc_vc4,Mask for err_crc_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_crc_vc3,Mask for err_crc_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_crc_vc2,Mask for err_crc_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_crc_vc1,Mask for err_crc_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_crc_vc0,Mask for err_crc_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_PLD_CRC_FATAL,Force for fatal interruption caused by Payload CRC." bitfld.long 0x4 15. "err_crc_vc15,Force err_crc_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_crc_vc14,Force err_crc_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_crc_vc13,Force err_crc_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_crc_vc12,Force err_crc_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_crc_vc11,Force err_crc_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_crc_vc10,Force err_crc_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_crc_vc9,Force err_crc_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_crc_vc8,Force err_crc_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_crc_vc7,Force err_crc_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_crc_vc6,Force err_crc_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_crc_vc5,Force err_crc_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_crc_vc4,Force err_crc_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_crc_vc3,Force err_crc_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_crc_vc2,Force err_crc_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_crc_vc1,Force err_crc_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_crc_vc0,Force err_crc_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2C0++0x3 line.long 0x0 "INT_ST_DATA_ID,Interruption caused by Data Type." bitfld.long 0x0 15. "err_id_vc15,Unrecognized or unimplemented data type detected in virtual channel 15." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 14. "err_id_vc14,Unrecognized or unimplemented data type detected in virtual channel 14." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 13. "err_id_vc13,Unrecognized or unimplemented data type detected in virtual channel 13." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 12. "err_id_vc12,Unrecognized or unimplemented data type detected in virtual channel 12." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 11. "err_id_vc11,Unrecognized or unimplemented data type detected in virtual channel 11." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 10. "err_id_vc10,Unrecognized or unimplemented data type detected in virtual channel 10." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 9. "err_id_vc9,Unrecognized or unimplemented data type detected in virtual channel 9." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 8. "err_id_vc8,Unrecognized or unimplemented data type detected in virtual channel 8." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 7. "err_id_vc7,Unrecognized or unimplemented data type detected in virtual channel 7." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 6. "err_id_vc6,Unrecognized or unimplemented data type detected in virtual channel 6." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 5. "err_id_vc5,Unrecognized or unimplemented data type detected in virtual channel 5." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 4. "err_id_vc4,Unrecognized or unimplemented data type detected in virtual channel 4." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 3. "err_id_vc3,Unrecognized or unimplemented data type detected in virtual channel 3." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 2. "err_id_vc2,Unrecognized or unimplemented data type detected in virtual channel 2." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 1. "err_id_vc1,Unrecognized or unimplemented data type detected in virtual channel 1." "0: No error.,1: Unrecognized or unimplemented data type error is.." newline bitfld.long 0x0 0. "err_id_vc0,Unrecognized or unimplemented data type detected in virtual channel 0." "0: No error.,1: Unrecognized or unimplemented data type error is.." group.long 0x2C4++0x7 line.long 0x0 "INT_MSK_DATA_ID,Mask for interruption caused by Data Type." bitfld.long 0x0 15. "err_id_vc15,Mask for err_id_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_id_vc14,Mask for err_id_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_id_vc13,Mask for err_id_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_id_vc12,Mask for err_id_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_id_vc11,Mask for err_id_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_id_vc10,Mask for err_id_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_id_vc9,Mask for err_id_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_id_vc8,Mask for err_id_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_id_vc7,Mask for err_id_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_id_vc6,Mask for err_id_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_id_vc5,Mask for err_id_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_id_vc4,Mask for err_id_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_id_vc3,Mask for err_id_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_id_vc2,Mask for err_id_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_id_vc1,Mask for err_id_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_id_vc0,Mask for err_id_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_DATA_ID,Force for interruption caused by Data Type." bitfld.long 0x4 15. "err_id_vc15,Force err_id_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_id_vc14,Force err_id_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_id_vc13,Force err_id_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_id_vc12,Force err_id_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_id_vc11,Force err_id_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_id_vc10,Force err_id_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_id_vc9,Force err_id_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_id_vc8,Force err_id_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_id_vc7,Force err_id_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_id_vc6,Force err_id_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_id_vc5,Force err_id_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_id_vc4,Force err_id_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_id_vc3,Force err_id_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_id_vc2,Force err_id_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_id_vc1,Force err_id_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_id_vc0,Force err_id_vc0." "0: Do not force the error event.,1: Force the error event to trigger." rgroup.long 0x2D0++0x3 line.long 0x0 "INT_ST_ECC_CORRECTED,Interruption caused by Header single bit errors." bitfld.long 0x0 15. "err_ecc_corrected_vc15,D-PHY mode: Header error detected and corrected on virtual channel 15." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 14. "err_ecc_corrected_vc14,D-PHY mode: Header error detected and corrected on virtual channel 14." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 13. "err_ecc_corrected_vc13,D-PHY mode: Header error detected and corrected on virtual channel 13." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 12. "err_ecc_corrected_vc12,D-PHY mode: Header error detected and corrected on virtual channel 12." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 11. "err_ecc_corrected_vc11,D-PHY mode: Header error detected and corrected on virtual channel 11." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 10. "err_ecc_corrected_vc10,D-PHY mode: Header error detected and corrected on virtual channel 10." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 9. "err_ecc_corrected_vc9,D-PHY mode: Header error detected and corrected on virtual channel 9." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 8. "err_ecc_corrected_vc8,D-PHY mode: Header error detected and corrected on virtual channel 8." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 7. "err_ecc_corrected_vc7,D-PHY mode: Header error detected and corrected on virtual channel 7." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 6. "err_ecc_corrected_vc6,D-PHY mode: Header error detected and corrected on virtual channel 6." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 5. "err_ecc_corrected_vc5,D-PHY mode: Header error detected and corrected on virtual channel 5." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 4. "err_ecc_corrected_vc4,D-PHY mode: Header error detected and corrected on virtual channel 4." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 3. "err_ecc_corrected_vc3,D-PHY mode: Header error detected and corrected on virtual channel 3." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 2. "err_ecc_corrected_vc2,D-PHY mode: Header error detected and corrected on virtual channel 2." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 1. "err_ecc_corrected_vc1,D-PHY mode: Header error detected and corrected on virtual channel 1." "0: No error.,1: Header error detected and corrected." newline bitfld.long 0x0 0. "err_ecc_corrected_vc0,D-PHY mode: Header error detected and corrected on virtual channel 0." "0: No error.,1: Header error detected and corrected." group.long 0x2D4++0x7 line.long 0x0 "INT_MSK_ECC_CORRECTED,Mask for interruption caused by Header single bit errors." bitfld.long 0x0 15. "err_ecc_corrected_vc15,Mask for err_ecc_corrected_vc15." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 14. "err_ecc_corrected_vc14,Mask for err_ecc_corrected_vc14." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 13. "err_ecc_corrected_vc13,Mask for err_ecc_corrected_vc13." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 12. "err_ecc_corrected_vc12,Mask for err_ecc_corrected_vc12." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 11. "err_ecc_corrected_vc11,Mask for err_ecc_corrected_vc11." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 10. "err_ecc_corrected_vc10,Mask for err_ecc_corrected_vc10." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 9. "err_ecc_corrected_vc9,Mask for err_ecc_corrected_vc9." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 8. "err_ecc_corrected_vc8,Mask for err_ecc_corrected_vc8." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 7. "err_ecc_corrected_vc7,Mask for err_ecc_corrected_vc7." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 6. "err_ecc_corrected_vc6,Mask for err_ecc_corrected_vc6." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 5. "err_ecc_corrected_vc5,Mask for err_ecc_corrected_vc5." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 4. "err_ecc_corrected_vc4,Mask for err_ecc_corrected_vc4." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 3. "err_ecc_corrected_vc3,Mask for err_ecc_corrected_vc3." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 2. "err_ecc_corrected_vc2,Mask for err_ecc_corrected_vc2." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 1. "err_ecc_corrected_vc1,Mask for err_ecc_corrected_vc1." "0: Interrupt source is masked.,1: Enable the interrupt source." newline bitfld.long 0x0 0. "err_ecc_corrected_vc0,Mask for err_ecc_corrected_vc0." "0: Interrupt source is masked.,1: Enable the interrupt source." line.long 0x4 "INT_FORCE_ECC_CORRECTED,Force for interruption caused by Header single bit errors." bitfld.long 0x4 15. "err_ecc_corrected_vc15,Force err_ecc_corrected_vc15." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 14. "err_ecc_corrected_vc14,Force err_ecc_corrected_vc14." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 13. "err_ecc_corrected_vc13,Force err_ecc_corrected_vc13." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 12. "err_ecc_corrected_vc12,Force err_ecc_corrected_vc12." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 11. "err_ecc_corrected_vc11,Force err_ecc_corrected_vc11." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 10. "err_ecc_corrected_vc10,Force err_ecc_corrected_vc10." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 9. "err_ecc_corrected_vc9,Force err_ecc_corrected_vc9." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 8. "err_ecc_corrected_vc8,Force err_ecc_corrected_vc8." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 7. "err_ecc_corrected_vc7,Force err_ecc_corrected_vc7." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 6. "err_ecc_corrected_vc6,Force err_ecc_corrected_vc6." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 5. "err_ecc_corrected_vc5,Force err_ecc_corrected_vc5." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 4. "err_ecc_corrected_vc4,Force err_ecc_corrected_vc4." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 3. "err_ecc_corrected_vc3,Force err_ecc_corrected_vc3." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 2. "err_ecc_corrected_vc2,Force err_ecc_corrected_vc2." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 1. "err_ecc_corrected_vc1,Force err_ecc_corrected_vc1." "0: Do not force the error event.,1: Force the error event to trigger." newline bitfld.long 0x4 0. "err_ecc_corrected_vc0,Force err_ecc_corrected_vc0." "0: Do not force the error event.,1: Force the error event to trigger." group.long 0x300++0x13 line.long 0x0 "SCRAMBLING,Data De-Scrambling." bitfld.long 0x0 0. "scramble_enable,Enables data de-scrambling on the controller side." "0: Disable data de-scrambling.,1: Enable data de-scrambling." line.long 0x4 "SCRAMBLING_SEED1,De-scrambler seed for lane1." hexmask.long.word 0x4 0.--15. 1. "scramble_seed_lane1,Seed used by De-scrambler block for lane 1" line.long 0x8 "SCRAMBLING_SEED2,De-scrambler seed for lane2." hexmask.long.word 0x8 0.--15. 1. "scramble_seed_lane2,Seed used by De-scrambler block for lane 2" line.long 0xC "SCRAMBLING_SEED3,De-scrambler seed for lane3." hexmask.long.word 0xC 0.--15. 1. "scramble_seed_lane3,Seed used by De-scrambler block for lane 3" line.long 0x10 "SCRAMBLING_SEED4,De-scrambler seed for lane4." hexmask.long.word 0x10 0.--15. 1. "scramble_seed_lane4,Seed used by De-scrambler block for lane 4" tree.end tree "CAMERA_OCRAM_MECC" base ad:0x4AF80000 group.long 0x0++0xF line.long 0x0 "RAMCR,RAM Control" bitfld.long 0x0 8. "INIT_SYSA,Initialize With System Address" "0: Local,1: System" bitfld.long 0x0 1.--2. "IWS,Initialization Wait States" "0: Zero,1: One,2: Two,3: Three" newline bitfld.long 0x0 0. "INIT,Initialization Request" "0: Not requested,1: Requested" line.long 0x4 "RAMIAS,RAM Initialization Address Start" hexmask.long 0x4 0.--31. 1. "IAS,Initialization Address Start" line.long 0x8 "RAMIAE,RAM Initialization Address End" hexmask.long 0x8 0.--31. 1. "IAE,Initialization Address End" line.long 0xC "RAMSR,RAM Status" hexmask.long.byte 0xC 16.--23. 1. "EINFO,Event Information" hexmask.long.byte 0xC 8.--15. 1. "SYND,ECC Syndrome Value" newline eventfld.long 0xC 7. "SGLERR,ECC Single-Bit Error" "0: No error occurred,1: An error occurred" eventfld.long 0xC 6. "MLTERR,ECC Multi-Bit Error" "0: No error occurred,1: An error occurred" newline eventfld.long 0xC 5. "AERR,ECC Address Error" "0: No error occurred,1: An error occurred" eventfld.long 0xC 3. "AVALID,Addresses Valid" "0: Addresses do not correspond to an event,1: Addresses correspond to an event" newline rbitfld.long 0xC 2. "IPEND,Initialization Pending" "0: Not in progress,1: In progress" eventfld.long 0xC 1. "BUSERR,Bus Error" "0: No error occurred since the last time this field..,1: An error occurred" newline eventfld.long 0xC 0. "IDONE,Initialization Done" "0: An initialization was not requested is in..,1: An initialization completed successfully" rgroup.long 0x10++0x3 line.long 0x0 "RAMMEMA,RAM ECC Address" hexmask.long.byte 0x0 20.--24. 1. "BANK,RAM Bank ID" hexmask.long.tbyte 0x0 0.--16. 1. "MEMA,RAM Bank Address" rgroup.long 0x18++0x3 line.long 0x0 "RAMSYSA,RAM System Address" hexmask.long 0x0 0.--31. 1. "SYSA,System Address" group.long 0x1C++0xF line.long 0x0 "RAMECCNT,RAM Correctable Error Count" hexmask.long.byte 0x0 0.--7. 1. "ECCNT,ECC Correctable Error Count" line.long 0x4 "RAMEID0,RAM Error Injection Data 0" hexmask.long 0x4 0.--31. 1. "EID_W0,Error Injection Data Word 0" line.long 0x8 "RAMEID1,RAM Error Injection Data 1" hexmask.long 0x8 0.--31. 1. "EID_W1,Error Injection Data Word 1" line.long 0xC "RAMEIDC,RAM Error Injection Data Control" bitfld.long 0xC 31. "EID_EN,Error Injection Data Enable" "0: No injection,1: Local injection" bitfld.long 0xC 30. "EIA_EN,Error Injection Address Enable" "0: Ignore RAMEIA and RAMEIAM,1: Enable RAMEIA and RAMEIAM" newline bitfld.long 0xC 24. "EIP_EN,Error Injection Into Pipeline Enable" "0: No error injected,1: Error injected" hexmask.long.byte 0xC 0.--7. 1. "EID_CKB,Error Injection Data Checkbits" group.long 0x30++0x7 line.long 0x0 "RAMEIA,RAM Error Injection Base Address" hexmask.long 0x0 0.--31. 1. "EIA,Error Injection Base Address" line.long 0x4 "RAMEIAM,RAM Error Injection Address Mask" hexmask.long 0x4 0.--31. 1. "EIAM,Error Injection Address Mask" group.long 0x40++0x3 line.long 0x0 "RAMMAXA,RAM Maximum-Value Address" hexmask.long 0x0 0.--31. 1. "MAXA,Maximum Address" group.long 0x80++0x3 line.long 0x0 "RAMCR2,RAM Control 2" bitfld.long 0x0 1.--2. "WBUF,Write Buffer Control" "0: Disable write buffer for all write transactions,1: Enable write buffer for write transactions that..,2: Enable write buffer for write transactions that..,?" tree.end tree "CAMERA_TCU" base ad:0x4AC00000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0x820++0x7 line.long 0x0 "tcu_pixel_slv_test_mode,PIXEL LINK slave test mode" bitfld.long 0x0 15. "pixel_slv_test_unpause,To drive pixel_slv_test_unpause signal" "0,1" rbitfld.long 0x0 14. "pixel_slv_test_error_valid,pixel loop test error valid" "0,1" bitfld.long 0x0 13. "pixel_slv_test_load,PIXEL SLV TEST LOAD" "0,1" newline bitfld.long 0x0 12. "pixel_slv_test_start,PIXEL SLV TEST START" "0,1" rbitfld.long 0x0 11. "pixel_slv3_test_pass_fail_b,pixel_slv3_test_pass_fail_b" "0,1" rbitfld.long 0x0 10. "pixel_slv3_test_done,pixel_slv3_test_done" "0,1" newline bitfld.long 0x0 9. "pixel_slv3_test_mode,pixel_slv3_test_mode" "0,1" rbitfld.long 0x0 8. "pixel_slv2_test_pass_fail_b,pixel_slv2_test_pass_fail_b" "0,1" rbitfld.long 0x0 7. "pixel_slv2_test_done,pixel_slv2_test_done" "0,1" newline bitfld.long 0x0 6. "pixel_slv2_test_mode,pixel_slv2_test_mode" "0,1" rbitfld.long 0x0 5. "pixel_slv1_test_pass_fail_b,pixel loop test pass/fail indication" "0,1" rbitfld.long 0x0 4. "pixel_slv1_test_done,pixel loop test done indication" "0,1" newline bitfld.long 0x0 3. "pixel_slv1_test_mode,pixel loop test production mode" "0,1" rbitfld.long 0x0 2. "pixel_slv0_test_pass_fail_b,pixel loop test pass/fail indication" "0,1" rbitfld.long 0x0 1. "pixel_slv0_test_done,pixel loop test done indication" "0,1" newline bitfld.long 0x0 0. "pixel_slv0_test_mode,pixel loop test production mode" "0,1" line.long 0x4 "tcu_pixel_slv_test_input_,PIXEL LINK slave test input" hexmask.long 0x4 0.--31. 1. "pixel_slv_test_input,pixel link test inputs" rgroup.long 0x828++0x3 line.long 0x0 "tcu_pixel_slv_test_error_bit,PIXEL LINK slave test error bits" hexmask.long 0x0 0.--31. 1. "pixel_slv_test_error_bit,test error bits observation" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" tree.end tree.end tree "CCMSRCGPC (Clocks Reset and Power Domain)" base ad:0x0 tree "CCMSRCGPC_CCM_CTRL" base ad:0x44450000 repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list ad:0x44450000 ad:0x44450080 ad:0x44450100 ad:0x44450180 ad:0x44450200 ad:0x44450280 ad:0x44450300 ad:0x44450380 ad:0x44450400 ad:0x44450480 ad:0x44450500 ad:0x44450580 ad:0x44450600 ad:0x44450680 ad:0x44450700 ad:0x44450780) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list ad:0x44450800 ad:0x44450880 ad:0x44450900 ad:0x44450980 ad:0x44450A00 ad:0x44450A80 ad:0x44450B00 ad:0x44450B80 ad:0x44450C00 ad:0x44450C80 ad:0x44450D00 ad:0x44450D80 ad:0x44450E00 ad:0x44450E80 ad:0x44450F00 ad:0x44450F80) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F)(list ad:0x44451000 ad:0x44451080 ad:0x44451100 ad:0x44451180 ad:0x44451200 ad:0x44451280 ad:0x44451300 ad:0x44451380 ad:0x44451400 ad:0x44451480 ad:0x44451500 ad:0x44451580 ad:0x44451600 ad:0x44451680 ad:0x44451700 ad:0x44451780) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F)(list ad:0x44451800 ad:0x44451880 ad:0x44451900 ad:0x44451980 ad:0x44451A00 ad:0x44451A80 ad:0x44451B00 ad:0x44451B80 ad:0x44451C00 ad:0x44451C80 ad:0x44451D00 ad:0x44451D80 ad:0x44451E00 ad:0x44451E80 ad:0x44451F00 ad:0x44451F80) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x40 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0x4B 0x4C 0x4D 0x4E 0x4F)(list ad:0x44452000 ad:0x44452080 ad:0x44452100 ad:0x44452180 ad:0x44452200 ad:0x44452280 ad:0x44452300 ad:0x44452380 ad:0x44452400 ad:0x44452480 ad:0x44452500 ad:0x44452580 ad:0x44452600 ad:0x44452680 ad:0x44452700 ad:0x44452780) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x50 0x51 0x52 0x53 0x54 0x55 0x56 0x57 0x58 0x59 0x5A 0x5B 0x5C 0x5D 0x5E 0x5F)(list ad:0x44452800 ad:0x44452880 ad:0x44452900 ad:0x44452980 ad:0x44452A00 ad:0x44452A80 ad:0x44452B00 ad:0x44452B80 ad:0x44452C00 ad:0x44452C80 ad:0x44452D00 ad:0x44452D80 ad:0x44452E00 ad:0x44452E80 ad:0x44452F00 ad:0x44452F80) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x60 0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F)(list ad:0x44453000 ad:0x44453080 ad:0x44453100 ad:0x44453180 ad:0x44453200 ad:0x44453280 ad:0x44453300 ad:0x44453380 ad:0x44453400 ad:0x44453480 ad:0x44453500 ad:0x44453580 ad:0x44453600 ad:0x44453680 ad:0x44453700 ad:0x44453780) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end repeat 16. (list 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E 0x7F)(list ad:0x44453800 ad:0x44453880 ad:0x44453900 ad:0x44453980 ad:0x44453A00 ad:0x44453A80 ad:0x44453B00 ad:0x44453B80 ad:0x44453C00 ad:0x44453C80 ad:0x44453D00 ad:0x44453D80 ad:0x44453E00 ad:0x44453E80 ad:0x44453F00 ad:0x44453F80) tree "CLOCK_ROOT[$1]" base $2 group.long ($2)++0xF line.long 0x0 "CLOCK_ROOT_CONTROL,Clock Root Control Register" bitfld.long 0x0 24. "OFF,Shutdown clock root." "0: Clock is running.,1: Turn off clock." bitfld.long 0x0 8.--9. "MUX,Clock multiplexer." "0: Select clock source 0,1: Select clock source 1,2: Select clock source 2,3: Select clock source 3" newline hexmask.long.byte 0x0 0.--7. 1. "DIV,Clock division fraction." line.long 0x4 "CLOCK_ROOT_CONTROL_SET,Clock Root Control Register" bitfld.long 0x4 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0x4 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x4 0.--7. 1. "DIV,Clock division fraction." line.long 0x8 "CLOCK_ROOT_CONTROL_CLR,Clock Root Control Register" eventfld.long 0x8 24. "OFF,Shutdown clock root." "0,1" eventfld.long 0x8 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--7. 1. "DIV,Clock division fraction." line.long 0xC "CLOCK_ROOT_CONTROL_TOG,Clock Root Control Register" bitfld.long 0xC 24. "OFF,Shutdown clock root." "0,1" bitfld.long 0xC 8.--9. "MUX,Clock multiplexer." "0,1,2,3" newline hexmask.long.byte 0xC 0.--7. 1. "DIV,Clock division fraction." rgroup.long ($2+0x20)++0x3 line.long 0x0 "CLOCK_ROOT_STATUS0,Clock root working status" bitfld.long 0x0 28. "SLICE_BUSY,Indication for clock generation logic is applying new setting." "0: Clock generation logic is not busy.,1: Clock generation logic is applying new setting." bitfld.long 0x0 24. "OFF,Current clock root OFF setting" "0: Clock is running.,1: Turn off clock." newline bitfld.long 0x0 8.--9. "MUX,Current clock root MUX setting" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DIV,Current clock root DIV setting" group.long ($2+0x30)++0x3 line.long 0x0 "CLOCK_ROOT_AUTHEN,Clock root access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Root settings cannot be changed in user..,1: Clock Root settings can be changed in user mode." tree.end repeat.end base ad:0x44450000 group.long 0x4800++0x5F line.long 0x0 "GPR_SHARED0,General Purpose Register" line.long 0x4 "GPR_SHARED0_SET,General Purpose Register" line.long 0x8 "GPR_SHARED0_CLR,General Purpose Register" line.long 0xC "GPR_SHARED0_TOG,General Purpose Register" line.long 0x10 "GPR_SHARED0_AUTHEN,GPR access control" hexmask.long.word 0x10 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x10 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x10 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x10 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x10 8. "TZ_USER,User access permission" "0: Registers of shared GPR slice cannot be changed..,1: Registers of shared GPR slice can be changed in.." line.long 0x14 "GPR_SHARED0_AUTHEN_SET,GPR access control" hexmask.long.word 0x14 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x14 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x14 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline bitfld.long 0x14 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x14 8. "TZ_USER,User access permission" "0,1" line.long 0x18 "GPR_SHARED0_AUTHEN_CLR,GPR access control" hexmask.long.word 0x18 16.--31. 1. "WHITE_LIST,White list settings" newline eventfld.long 0x18 15. "LOCK_LIST,Lock white list" "0,1" newline eventfld.long 0x18 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline eventfld.long 0x18 9. "TZ_NS,Non-secure access permission" "0,1" newline eventfld.long 0x18 8. "TZ_USER,User access permission" "0,1" line.long 0x1C "GPR_SHARED0_AUTHEN_TOG,GPR access control" hexmask.long.word 0x1C 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x1C 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x1C 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline bitfld.long 0x1C 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x1C 8. "TZ_USER,User access permission" "0,1" line.long 0x20 "GPR_SHARED1,General Purpose Register" bitfld.long 0x20 0. "CA55_CLOCK_SELECT,Clock select signal between ccm clock root and ARM PLL clock" "0: Clkroot_arm_a55 is used.,1: The clock output of ARM PLL is selected." line.long 0x24 "GPR_SHARED1_SET,General Purpose Register" bitfld.long 0x24 0. "CA55_CLOCK_SELECT,Clock select signal between ccm clock root and ARM PLL clock" "0,1" line.long 0x28 "GPR_SHARED1_CLR,General Purpose Register" eventfld.long 0x28 0. "CA55_CLOCK_SELECT,Clock select signal between ccm clock root and ARM PLL clock" "0,1" line.long 0x2C "GPR_SHARED1_TOG,General Purpose Register" bitfld.long 0x2C 0. "CA55_CLOCK_SELECT,Clock select signal between ccm clock root and ARM PLL clock" "0,1" line.long 0x30 "GPR_SHARED1_AUTHEN,GPR access control" hexmask.long.word 0x30 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x30 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x30 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x30 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x30 8. "TZ_USER,User access permission" "0: Registers of shared GPR slice cannot be changed..,1: Registers of shared GPR slice can be changed in.." line.long 0x34 "GPR_SHARED1_AUTHEN_SET,GPR access control" hexmask.long.word 0x34 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x34 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x34 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline bitfld.long 0x34 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x34 8. "TZ_USER,User access permission" "0,1" line.long 0x38 "GPR_SHARED1_AUTHEN_CLR,GPR access control" hexmask.long.word 0x38 16.--31. 1. "WHITE_LIST,White list settings" newline eventfld.long 0x38 15. "LOCK_LIST,Lock white list" "0,1" newline eventfld.long 0x38 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline eventfld.long 0x38 9. "TZ_NS,Non-secure access permission" "0,1" newline eventfld.long 0x38 8. "TZ_USER,User access permission" "0,1" line.long 0x3C "GPR_SHARED1_AUTHEN_TOG,GPR access control" hexmask.long.word 0x3C 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x3C 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x3C 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline bitfld.long 0x3C 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x3C 8. "TZ_USER,User access permission" "0,1" line.long 0x40 "GPR_SHARED2,General Purpose Register" bitfld.long 0x40 0. "DRAM_PLL_BYPASS,Clock select signal between ccm clock root and DRAM PLL clock" "0: The clock output of DRAM PLL is selected.,1: Dram_alt_clk_root is selected." line.long 0x44 "GPR_SHARED2_SET,General Purpose Register" bitfld.long 0x44 0. "DRAM_PLL_BYPASS,Clock select signal between ccm clock root and DRAM PLL clock" "0,1" line.long 0x48 "GPR_SHARED2_CLR,General Purpose Register" eventfld.long 0x48 0. "DRAM_PLL_BYPASS,Clock select signal between ccm clock root and DRAM PLL clock" "0,1" line.long 0x4C "GPR_SHARED2_TOG,General Purpose Register" bitfld.long 0x4C 0. "DRAM_PLL_BYPASS,Clock select signal between ccm clock root and DRAM PLL clock" "0,1" line.long 0x50 "GPR_SHARED2_AUTHEN,GPR access control" hexmask.long.word 0x50 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x50 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x50 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x50 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x50 8. "TZ_USER,User access permission" "0: Registers of shared GPR slice cannot be changed..,1: Registers of shared GPR slice can be changed in.." line.long 0x54 "GPR_SHARED2_AUTHEN_SET,GPR access control" hexmask.long.word 0x54 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x54 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x54 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline bitfld.long 0x54 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x54 8. "TZ_USER,User access permission" "0,1" line.long 0x58 "GPR_SHARED2_AUTHEN_CLR,GPR access control" hexmask.long.word 0x58 16.--31. 1. "WHITE_LIST,White list settings" newline eventfld.long 0x58 15. "LOCK_LIST,Lock white list" "0,1" newline eventfld.long 0x58 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline eventfld.long 0x58 9. "TZ_NS,Non-secure access permission" "0,1" newline eventfld.long 0x58 8. "TZ_USER,User access permission" "0,1" line.long 0x5C "GPR_SHARED2_AUTHEN_TOG,GPR access control" hexmask.long.word 0x5C 16.--31. 1. "WHITE_LIST,White list settings" newline bitfld.long 0x5C 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x5C 11. "LOCK_TZ,Lock Trustzone settings" "0,1" newline bitfld.long 0x5C 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x5C 8. "TZ_USER,User access permission" "0,1" repeat 5. (list 0x0 0x1 0x2 0x3 0x4)(list ad:0x44454860 ad:0x44454880 ad:0x444548A0 ad:0x444548C0 ad:0x444548E0) tree "GPR_SHARED[$1]" base $2 group.long ($2)++0x1F line.long 0x0 "GPR_SHARED,General Purpose Register" line.long 0x4 "GPR_SHARED_SET,General Purpose Register" line.long 0x8 "GPR_SHARED_CLR,General Purpose Register" line.long 0xC "GPR_SHARED_TOG,General Purpose Register" line.long 0x10 "GPR_SHARED_AUTHEN,GPR access control" hexmask.long.word 0x10 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x10 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x10 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x10 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x10 8. "TZ_USER,User access permission" "0: Registers of shared GPR slice cannot be changed..,1: Registers of shared GPR slice can be changed in.." line.long 0x14 "GPR_SHARED_AUTHEN_SET,GPR access control" hexmask.long.word 0x14 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x14 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x14 11. "LOCK_TZ,Lock Trustzone settings" "0,1" bitfld.long 0x14 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x14 8. "TZ_USER,User access permission" "0,1" line.long 0x18 "GPR_SHARED_AUTHEN_CLR,GPR access control" hexmask.long.word 0x18 16.--31. 1. "WHITE_LIST,White list settings" eventfld.long 0x18 15. "LOCK_LIST,Lock white list" "0,1" newline eventfld.long 0x18 11. "LOCK_TZ,Lock Trustzone settings" "0,1" eventfld.long 0x18 9. "TZ_NS,Non-secure access permission" "0,1" newline eventfld.long 0x18 8. "TZ_USER,User access permission" "0,1" line.long 0x1C "GPR_SHARED_AUTHEN_TOG,GPR access control" hexmask.long.word 0x1C 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x1C 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x1C 11. "LOCK_TZ,Lock Trustzone settings" "0,1" bitfld.long 0x1C 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x1C 8. "TZ_USER,User access permission" "0,1" tree.end repeat.end repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list ad:0x44454C00 ad:0x44454C20 ad:0x44454C40 ad:0x44454C60 ad:0x44454C80 ad:0x44454CA0 ad:0x44454CC0 ad:0x44454CE0 ad:0x44454D00 ad:0x44454D20 ad:0x44454D40 ad:0x44454D60 ad:0x44454D80 ad:0x44454DA0 ad:0x44454DC0 ad:0x44454DE0) tree "GPR_PRIVATE[$1]" base $2 group.long ($2)++0x1F line.long 0x0 "GPR_PRIVATE,General purpose register" hexmask.long 0x0 0.--31. 1. "GPR,GP register" line.long 0x4 "GPR_PRIVATE_SET,General purpose register" hexmask.long 0x4 0.--31. 1. "GPR,GP register" line.long 0x8 "GPR_PRIVATE_CLR,General purpose register" hexmask.long 0x8 0.--31. 1. "GPR,GP register" line.long 0xC "GPR_PRIVATE_TOG,General purpose register" hexmask.long 0xC 0.--31. 1. "GPR,GP register" line.long 0x10 "GPR_PRIVATE_AUTHEN,GPR access control" hexmask.long.word 0x10 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x10 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x10 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." bitfld.long 0x10 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x10 8. "TZ_USER,User access permission" "0: Registers of private GPR cannot be changed in..,1: Registers of private GPR can be changed in user.." line.long 0x14 "GPR_PRIVATE_AUTHEN_SET,GPR access control" hexmask.long.word 0x14 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x14 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x14 11. "LOCK_TZ,Lock Trustzone settings" "0,1" bitfld.long 0x14 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x14 8. "TZ_USER,User access permission" "0,1" line.long 0x18 "GPR_PRIVATE_AUTHEN_CLR,GPR access control" hexmask.long.word 0x18 16.--31. 1. "WHITE_LIST,White list settings" eventfld.long 0x18 15. "LOCK_LIST,Lock white list" "0,1" newline eventfld.long 0x18 11. "LOCK_TZ,Lock Trustzone settings" "0,1" eventfld.long 0x18 9. "TZ_NS,Non-secure access permission" "0,1" newline eventfld.long 0x18 8. "TZ_USER,User access permission" "0,1" line.long 0x1C "GPR_PRIVATE_AUTHEN_TOG,GPR access control" hexmask.long.word 0x1C 16.--31. 1. "WHITE_LIST,White list settings" bitfld.long 0x1C 15. "LOCK_LIST,Lock white list" "0,1" newline bitfld.long 0x1C 11. "LOCK_TZ,Lock Trustzone settings" "0,1" bitfld.long 0x1C 9. "TZ_NS,Non-secure access permission" "0,1" newline bitfld.long 0x1C 8. "TZ_USER,User access permission" "0,1" tree.end repeat.end repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list ad:0x44455000 ad:0x44455040 ad:0x44455080 ad:0x444550C0 ad:0x44455100 ad:0x44455140 ad:0x44455180 ad:0x444551C0 ad:0x44455200 ad:0x44455240 ad:0x44455280 ad:0x444552C0 ad:0x44455300 ad:0x44455340 ad:0x44455380 ad:0x444553C0) tree "OSCPLL[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "OSCPLL_DIRECT,Clock source direct control" bitfld.long 0x0 0. "ON,Turn on clock source" "0: Clock source is OFF.,1: Clock source is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "OSCPLL_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "OSCPLL_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "OSCPLL_LPM0,Clock source low power mode setting" bitfld.long 0x0 28.--30. "LPM_SETTING_D7,Clock Source low power mode setting in DOMAIN7" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 24.--26. "LPM_SETTING_D6,Clock Source low power mode setting in DOMAIN6" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 20.--22. "LPM_SETTING_D5,Clock Source low power mode setting in DOMAIN5" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 16.--18. "LPM_SETTING_D4,Clock Source low power mode setting in DOMAIN4" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 12.--14. "LPM_SETTING_D3,Clock Source low power mode setting in DOMAIN3" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 8.--10. "LPM_SETTING_D2,Clock Source low power mode setting in DOMAIN2" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 4.--6. "LPM_SETTING_D1,Clock Source low power mode setting in DOMAIN1" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 0.--2. "LPM_SETTING_D0,Clock Source low power mode setting in DOMAIN0" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" line.long 0x4 "OSCPLL_LPM1,clock source low power mode setting" bitfld.long 0x4 28.--30. "LPM_SETTING_D15,Clock Source LPM in DOMAIN15" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D14,Clock Source LPM in DOMAIN14" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D13,Clock Source LPM in DOMAIN13" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D12,Clock Source LPM in DOMAIN12" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D11,Clock Source LPM in DOMAIN11" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D10,Clock Source LPM in DOMAIN10" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D9,Clock Source LPM in DOMAIN9" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D8,Clock Source LPM in DOMAIN8" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" rgroup.long ($2+0x1C)++0xB line.long 0x0 "OSCPLL_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--2. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3,4,5,6,7" line.long 0x4 "OSCPLL_STATUS0,Clock source working status" bitfld.long 0x4 12. "IN_USE,This Clock Source is being used or not." "0: Clock Source is not being used.,1: Clock Source is being used." newline bitfld.long 0x4 5. "STATUS_LATE,Late ready signal sent from PLL. This signal means clock source is ready to be used." "0,1" newline bitfld.long 0x4 4. "STATUS_EARLY,Early ready signal sent from PLL control module" "0,1" newline bitfld.long 0x4 0. "ON,Clock source current state" "0: Clock source is OFF.,1: Clock source is ON." line.long 0x8 "OSCPLL_STATUS1,Clock source domain status" hexmask.long.word 0x8 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x8 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "OSCPLL_AUTHEN,Clock Source access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Source settings cannot be changed in user..,1: Clock Source settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE and AUTO_CTRL cannot be changed" "0: CPULPM_MODE and AUTO_CTRL is not locked.,1: CPULPM_MODE and AUTO_CTRL is locked." newline bitfld.long 0x0 3. "AUTO_CTRL,Auto mode enable" "0: Disable Auto mode,1: Enable Auto mode" newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode.,1: Enable CPULPM mode." tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list ad:0x44455400 ad:0x44455440 ad:0x44455480 ad:0x444554C0 ad:0x44455500 ad:0x44455540 ad:0x44455580 ad:0x444555C0 ad:0x44455600 ad:0x44455640 ad:0x44455680 ad:0x444556C0 ad:0x44455700 ad:0x44455740 ad:0x44455780 ad:0x444557C0) tree "OSCPLL[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "OSCPLL_DIRECT,Clock source direct control" bitfld.long 0x0 0. "ON,Turn on clock source" "0: Clock source is OFF.,1: Clock source is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "OSCPLL_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "OSCPLL_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable OSCPLL. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "OSCPLL_LPM0,Clock source low power mode setting" bitfld.long 0x0 28.--30. "LPM_SETTING_D7,Clock Source low power mode setting in DOMAIN7" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 24.--26. "LPM_SETTING_D6,Clock Source low power mode setting in DOMAIN6" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 20.--22. "LPM_SETTING_D5,Clock Source low power mode setting in DOMAIN5" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 16.--18. "LPM_SETTING_D4,Clock Source low power mode setting in DOMAIN4" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 12.--14. "LPM_SETTING_D3,Clock Source low power mode setting in DOMAIN3" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 8.--10. "LPM_SETTING_D2,Clock Source low power mode setting in DOMAIN2" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 4.--6. "LPM_SETTING_D1,Clock Source low power mode setting in DOMAIN1" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x0 0.--2. "LPM_SETTING_D0,Clock Source low power mode setting in DOMAIN0" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" line.long 0x4 "OSCPLL_LPM1,clock source low power mode setting" bitfld.long 0x4 28.--30. "LPM_SETTING_D15,Clock Source LPM in DOMAIN15" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D14,Clock Source LPM in DOMAIN14" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D13,Clock Source LPM in DOMAIN13" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D12,Clock Source LPM in DOMAIN12" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D11,Clock Source LPM in DOMAIN11" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D10,Clock Source LPM in DOMAIN10" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D9,Clock Source LPM in DOMAIN9" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D8,Clock Source LPM in DOMAIN8" "0: Clock Source will be OFF in any CPU mode.,1: Clock Source will be ON in RUN mode OFF in..,2: Clock Source will be ON in RUN/WAIT mode OFF in..,3: Clock Source will be ON in RUN/WAIT/STOP mode..,4: Clock Source will be ON in RUN/WAIT/STOP/SUSPEND..,?,?,?" rgroup.long ($2+0x1C)++0xB line.long 0x0 "OSCPLL_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--2. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3,4,5,6,7" line.long 0x4 "OSCPLL_STATUS0,Clock source working status" bitfld.long 0x4 12. "IN_USE,This Clock Source is being used or not." "0: Clock Source is not being used.,1: Clock Source is being used." newline bitfld.long 0x4 5. "STATUS_LATE,Late ready signal sent from PLL. This signal means clock source is ready to be used." "0,1" newline bitfld.long 0x4 4. "STATUS_EARLY,Early ready signal sent from PLL control module" "0,1" newline bitfld.long 0x4 0. "ON,Clock source current state" "0: Clock source is OFF.,1: Clock source is ON." line.long 0x8 "OSCPLL_STATUS1,Clock source domain status" hexmask.long.word 0x8 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x8 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "OSCPLL_AUTHEN,Clock Source access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: Clock Source settings cannot be changed in user..,1: Clock Source settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE and AUTO_CTRL cannot be changed" "0: CPULPM_MODE and AUTO_CTRL is not locked.,1: CPULPM_MODE and AUTO_CTRL is locked." newline bitfld.long 0x0 3. "AUTO_CTRL,Auto mode enable" "0: Disable Auto mode,1: Enable Auto mode" newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode.,1: Enable CPULPM mode." tree.end repeat.end repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list ad:0x44458000 ad:0x44458040 ad:0x44458080 ad:0x444580C0 ad:0x44458100 ad:0x44458140 ad:0x44458180 ad:0x444581C0 ad:0x44458200 ad:0x44458240 ad:0x44458280 ad:0x444582C0 ad:0x44458300 ad:0x44458340 ad:0x44458380 ad:0x444583C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list ad:0x44458400 ad:0x44458440 ad:0x44458480 ad:0x444584C0 ad:0x44458500 ad:0x44458540 ad:0x44458580 ad:0x444585C0 ad:0x44458600 ad:0x44458640 ad:0x44458680 ad:0x444586C0 ad:0x44458700 ad:0x44458740 ad:0x44458780 ad:0x444587C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F)(list ad:0x44458800 ad:0x44458840 ad:0x44458880 ad:0x444588C0 ad:0x44458900 ad:0x44458940 ad:0x44458980 ad:0x444589C0 ad:0x44458A00 ad:0x44458A40 ad:0x44458A80 ad:0x44458AC0 ad:0x44458B00 ad:0x44458B40 ad:0x44458B80 ad:0x44458BC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F)(list ad:0x44458C00 ad:0x44458C40 ad:0x44458C80 ad:0x44458CC0 ad:0x44458D00 ad:0x44458D40 ad:0x44458D80 ad:0x44458DC0 ad:0x44458E00 ad:0x44458E40 ad:0x44458E80 ad:0x44458EC0 ad:0x44458F00 ad:0x44458F40 ad:0x44458F80 ad:0x44458FC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x40 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0x4B 0x4C 0x4D 0x4E 0x4F)(list ad:0x44459000 ad:0x44459040 ad:0x44459080 ad:0x444590C0 ad:0x44459100 ad:0x44459140 ad:0x44459180 ad:0x444591C0 ad:0x44459200 ad:0x44459240 ad:0x44459280 ad:0x444592C0 ad:0x44459300 ad:0x44459340 ad:0x44459380 ad:0x444593C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x50 0x51 0x52 0x53 0x54 0x55 0x56 0x57 0x58 0x59 0x5A 0x5B 0x5C 0x5D 0x5E 0x5F)(list ad:0x44459400 ad:0x44459440 ad:0x44459480 ad:0x444594C0 ad:0x44459500 ad:0x44459540 ad:0x44459580 ad:0x444595C0 ad:0x44459600 ad:0x44459640 ad:0x44459680 ad:0x444596C0 ad:0x44459700 ad:0x44459740 ad:0x44459780 ad:0x444597C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x60 0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F)(list ad:0x44459800 ad:0x44459840 ad:0x44459880 ad:0x444598C0 ad:0x44459900 ad:0x44459940 ad:0x44459980 ad:0x444599C0 ad:0x44459A00 ad:0x44459A40 ad:0x44459A80 ad:0x44459AC0 ad:0x44459B00 ad:0x44459B40 ad:0x44459B80 ad:0x44459BC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E 0x7F)(list ad:0x44459C00 ad:0x44459C40 ad:0x44459C80 ad:0x44459CC0 ad:0x44459D00 ad:0x44459D40 ad:0x44459D80 ad:0x44459DC0 ad:0x44459E00 ad:0x44459E40 ad:0x44459E80 ad:0x44459EC0 ad:0x44459F00 ad:0x44459F40 ad:0x44459F80 ad:0x44459FC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x80 0x81 0x82 0x83 0x84 0x85 0x86 0x87 0x88 0x89 0x8A 0x8B 0x8C 0x8D 0x8E 0x8F)(list ad:0x4445A000 ad:0x4445A040 ad:0x4445A080 ad:0x4445A0C0 ad:0x4445A100 ad:0x4445A140 ad:0x4445A180 ad:0x4445A1C0 ad:0x4445A200 ad:0x4445A240 ad:0x4445A280 ad:0x4445A2C0 ad:0x4445A300 ad:0x4445A340 ad:0x4445A380 ad:0x4445A3C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0x90 0x91 0x92 0x93 0x94 0x95 0x96 0x97 0x98 0x99 0x9A 0x9B 0x9C 0x9D 0x9E 0x9F)(list ad:0x4445A400 ad:0x4445A440 ad:0x4445A480 ad:0x4445A4C0 ad:0x4445A500 ad:0x4445A540 ad:0x4445A580 ad:0x4445A5C0 ad:0x4445A600 ad:0x4445A640 ad:0x4445A680 ad:0x4445A6C0 ad:0x4445A700 ad:0x4445A740 ad:0x4445A780 ad:0x4445A7C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0xA0 0xA1 0xA2 0xA3 0xA4 0xA5 0xA6 0xA7 0xA8 0xA9 0xAA 0xAB 0xAC 0xAD 0xAE 0xAF)(list ad:0x4445A800 ad:0x4445A840 ad:0x4445A880 ad:0x4445A8C0 ad:0x4445A900 ad:0x4445A940 ad:0x4445A980 ad:0x4445A9C0 ad:0x4445AA00 ad:0x4445AA40 ad:0x4445AA80 ad:0x4445AAC0 ad:0x4445AB00 ad:0x4445AB40 ad:0x4445AB80 ad:0x4445ABC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0xB0 0xB1 0xB2 0xB3 0xB4 0xB5 0xB6 0xB7 0xB8 0xB9 0xBA 0xBB 0xBC 0xBD 0xBE 0xBF)(list ad:0x4445AC00 ad:0x4445AC40 ad:0x4445AC80 ad:0x4445ACC0 ad:0x4445AD00 ad:0x4445AD40 ad:0x4445AD80 ad:0x4445ADC0 ad:0x4445AE00 ad:0x4445AE40 ad:0x4445AE80 ad:0x4445AEC0 ad:0x4445AF00 ad:0x4445AF40 ad:0x4445AF80 ad:0x4445AFC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0xC0 0xC1 0xC2 0xC3 0xC4 0xC5 0xC6 0xC7 0xC8 0xC9 0xCA 0xCB 0xCC 0xCD 0xCE 0xCF)(list ad:0x4445B000 ad:0x4445B040 ad:0x4445B080 ad:0x4445B0C0 ad:0x4445B100 ad:0x4445B140 ad:0x4445B180 ad:0x4445B1C0 ad:0x4445B200 ad:0x4445B240 ad:0x4445B280 ad:0x4445B2C0 ad:0x4445B300 ad:0x4445B340 ad:0x4445B380 ad:0x4445B3C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0xD0 0xD1 0xD2 0xD3 0xD4 0xD5 0xD6 0xD7 0xD8 0xD9 0xDA 0xDB 0xDC 0xDD 0xDE 0xDF)(list ad:0x4445B400 ad:0x4445B440 ad:0x4445B480 ad:0x4445B4C0 ad:0x4445B500 ad:0x4445B540 ad:0x4445B580 ad:0x4445B5C0 ad:0x4445B600 ad:0x4445B640 ad:0x4445B680 ad:0x4445B6C0 ad:0x4445B700 ad:0x4445B740 ad:0x4445B780 ad:0x4445B7C0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0xE0 0xE1 0xE2 0xE3 0xE4 0xE5 0xE6 0xE7 0xE8 0xE9 0xEA 0xEB 0xEC 0xED 0xEE 0xEF)(list ad:0x4445B800 ad:0x4445B840 ad:0x4445B880 ad:0x4445B8C0 ad:0x4445B900 ad:0x4445B940 ad:0x4445B980 ad:0x4445B9C0 ad:0x4445BA00 ad:0x4445BA40 ad:0x4445BA80 ad:0x4445BAC0 ad:0x4445BB00 ad:0x4445BB40 ad:0x4445BB80 ad:0x4445BBC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end repeat 16. (list 0xF0 0xF1 0xF2 0xF3 0xF4 0xF5 0xF6 0xF7 0xF8 0xF9 0xFA 0xFB 0xFC 0xFD 0xFE 0xFF)(list ad:0x4445BC00 ad:0x4445BC40 ad:0x4445BC80 ad:0x4445BCC0 ad:0x4445BD00 ad:0x4445BD40 ad:0x4445BD80 ad:0x4445BDC0 ad:0x4445BE00 ad:0x4445BE40 ad:0x4445BE80 ad:0x4445BEC0 ad:0x4445BF00 ad:0x4445BF40 ad:0x4445BF80 ad:0x4445BFC0) tree "LPCG[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "LPCG_DIRECT,LPCG direct control" bitfld.long 0x0 2. "CLKOFF_ACK_TIMEOUT_EN,Clock off handshake timeout enable" "0: disable,1: enable" newline bitfld.long 0x0 0. "ON,Turn on LPCG" "0: LPCG is OFF.,1: LPCG is ON." rgroup.long ($2+0x4)++0x7 line.long 0x0 "LPCG_LPM_STATUS0,Low power mode information transfer status" bitfld.long 0x0 30. "TRANS_REQ_DOMAIN7,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 28.--29. "CPU_MODE_DOMAIN7,Current mode of CPU domain 7" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 26. "TRANS_REQ_DOMAIN6,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 24.--25. "CPU_MODE_DOMAIN6,Current mode of CPU domain 6" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 22. "TRANS_REQ_DOMAIN5,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 20.--21. "CPU_MODE_DOMAIN5,Current mode of CPU domain 5" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 18. "TRANS_REQ_DOMAIN4,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 16.--17. "CPU_MODE_DOMAIN4,Current mode of CPU domain 4" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 14. "TRANS_REQ_DOMAIN3,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 12.--13. "CPU_MODE_DOMAIN3,Current mode of CPU domain 3" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 10. "TRANS_REQ_DOMAIN2,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 8.--9. "CPU_MODE_DOMAIN2,Current mode of CPU domain 2" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 6. "TRANS_REQ_DOMAIN1,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 4.--5. "CPU_MODE_DOMAIN1,Current mode of CPU domain 1" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x0 2. "TRANS_REQ_DOMAIN0,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x0 0.--1. "CPU_MODE_DOMAIN0,Current mode of CPU domain 0" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" line.long 0x4 "LPCG_LPM_STATUS1,Low power mode information transfer status" bitfld.long 0x4 30. "TRANS_REQ_DOMAIN15,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 28.--29. "CPU_MODE_DOMAIN15,Current mode of CPU domain 15" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 26. "TRANS_REQ_DOMAIN14,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 24.--25. "CPU_MODE_DOMAIN14,Current mode of CPU domain 14" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 22. "TRANS_REQ_DOMAIN13,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 20.--21. "CPU_MODE_DOMAIN13,Current mode of CPU domain 13" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 18. "TRANS_REQ_DOMAIN12,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 16.--17. "CPU_MODE_DOMAIN12,Current mode of CPU domain 12" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 14. "TRANS_REQ_DOMAIN11,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 12.--13. "CPU_MODE_DOMAIN11,Current mode of CPU domain 11" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 10. "TRANS_REQ_DOMAIN10,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 8.--9. "CPU_MODE_DOMAIN10,Current mode of CPU domain 10" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 6. "TRANS_REQ_DOMAIN9,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 4.--5. "CPU_MODE_DOMAIN9,Current mode of CPU domain 9" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" newline bitfld.long 0x4 2. "TRANS_REQ_DOMAIN8,GPC request CCM to enable or disable LPCG. This signal will turn to low once CCM complete response to GPC." "0,1" newline bitfld.long 0x4 0.--1. "CPU_MODE_DOMAIN8,Current mode of CPU domain 8" "0: CPU is in RUN mode,1: CPU is in WAIT mode,2: CPU is in STOP mode,3: CPU is in SUSPEND mode" group.long ($2+0x10)++0x7 line.long 0x0 "LPCG_LPM0,LPCG low power mode setting" bitfld.long 0x0 28.--29. "LPM_SETTING_D7,LPCG low power mode setting in DOMAIN7" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 24.--25. "LPM_SETTING_D6,LPCG low power mode setting in DOMAIN6" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 20.--21. "LPM_SETTING_D5,LPCG low power mode setting in DOMAIN5" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 16.--17. "LPM_SETTING_D4,LPCG low power mode setting in DOMAIN4" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 12.--13. "LPM_SETTING_D3,LPCG low power mode setting in DOMAIN3" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 8.--9. "LPM_SETTING_D2,LPCG low power mode setting in DOMAIN2" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 4.--5. "LPM_SETTING_D1,LPCG low power mode setting in DOMAIN1" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x0 0.--1. "LPM_SETTING_D0,LPCG low power mode setting in DOMAIN0" "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." line.long 0x4 "LPCG_LPM1,LPCG low power mode setting" bitfld.long 0x4 28.--29. "LPM_SETTING_D15,LPCG low power mode setting in DOMAIN15." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 24.--25. "LPM_SETTING_D14,LPCG low power mode setting in DOMAIN14." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 20.--21. "LPM_SETTING_D13,LPCG low power mode setting in DOMAIN13." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 16.--17. "LPM_SETTING_D12,LPCG low power mode setting in DOMAIN12." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 12.--13. "LPM_SETTING_D11,LPCG low power mode setting in DOMAIN11." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 8.--9. "LPM_SETTING_D10,LPCG low power mode setting in DOMAIN10." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 4.--5. "LPM_SETTING_D9,LPCG low power mode setting in DOMAIN9." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." newline bitfld.long 0x4 0.--1. "LPM_SETTING_D8,LPCG low power mode setting in DOMAIN8." "0: LPCG will be OFF in any CPU mode.,1: LPCG will be ON in RUN mode OFF in..,2: LPCG will be ON in RUN/WAIT mode OFF in..,3: LPCG will be ON in RUN/WAIT/STOP mode OFF in.." group.long ($2+0x1C)++0x3 line.long 0x0 "LPCG_LPM_CUR,LPM setting of current CPU domain" bitfld.long 0x0 0.--1. "LPM_SETTING_CUR,LPM SETTING of current CPU DOMAIN" "0,1,2,3" rgroup.long ($2+0x20)++0x7 line.long 0x0 "LPCG_STATUS0,LPCG working status" bitfld.long 0x0 0. "ON,LPCG work status" "0: LPCG is OFF.,1: LPCG is ON." line.long 0x4 "LPCG_STATUS1,LPCG domain status" hexmask.long.word 0x4 16.--31. 1. "DOMAIN_ENABLE,Domain enable" newline hexmask.long.word 0x4 0.--15. 1. "DOMAIN_ACTIVE,Domain active" group.long ($2+0x30)++0x3 line.long 0x0 "LPCG_AUTHEN,LPCG access control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,White list" newline bitfld.long 0x0 15. "LOCK_LIST,Lock white list" "0: White list is not locked.,1: White list is locked." newline bitfld.long 0x0 11. "LOCK_TZ,Lock Trustzone settings" "0: Trustzone settings is not locked.,1: Trustzone settings is locked." newline bitfld.long 0x0 9. "TZ_NS,Non-secure access permission" "0: Cannot be changed in Non-secure mode.,1: Can be changed in Non-secure mode." newline bitfld.long 0x0 8. "TZ_USER,User access permission" "0: LPCG settings cannot be changed in user mode.,1: LPCG settings can be changed in user mode." newline bitfld.long 0x0 7. "LOCK_MODE,When this bit is set CPULPM_MODE cannot be changed" "0: CPULPM_MODE is not locked.,1: CPULPM_MODE is locked." newline bitfld.long 0x0 2. "CPULPM_MODE,CPULPM mode enable" "0: Disable CPULPM mode this LPCG is in Direct..,1: Enable CPULPM mode this LPCG is in CPULPM mode." tree.end repeat.end tree.end tree "CCMSRCGPC_TCU" base ad:0x444D0000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" newline bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" tree.end tree "GPC_CPU_CTRL" tree "GPC_CTRL_CA55_0" base ad:0x44471000 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CA55_1" base ad:0x44471800 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CA55_2" base ad:0x44472000 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CA55_3" base ad:0x44472800 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CA55_4" base ad:0x44473000 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CA55_5" base ad:0x44473800 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CA55_CLUSTER" base ad:0x44474000 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CM7" base ad:0x44470800 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree "GPC_CTRL_CM33" base ad:0x44470000 group.long 0x4++0x3 line.long 0x0 "CMC_AUTHEN_CTRL,CMC Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode control,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0xC++0x7 line.long 0x0 "CMC_MISC,Miscellaneous" bitfld.long 0x0 6. "SW_WAKEUP,software wakeup. Used for CPU hotplug." "0,1" newline bitfld.long 0x0 5. "IRQ_MUX,IRQ select" "0: From raw IRQ,1: From GIC" newline rbitfld.long 0x0 4. "GIC_WAKEUP_STAT,GIC wakeup request status" "0,1" newline rbitfld.long 0x0 2. "SLEEP_HOLD_STAT,Status of cpu_sleep_hold_ack_b" "0: CPU sleep hold is acknowledged,1: CPU is not in sleep hold" newline bitfld.long 0x0 1. "SLEEP_HOLD_EN,Allow cpu_sleep_hold_req assert during CPU low power status" "0: Disable cpu_sleep_hold_req,1: Allow cpu_sleep_hold_req to assert during CPU.." newline rbitfld.long 0x0 0. "NMI_STAT,Non-masked interrupt status" "0: NMI is not asserted,1: NMI is asserted" line.long 0x4 "CMC_MODE_CTRL,CPU mode control" bitfld.long 0x4 4. "WFE_EN,WFE assertion can be sleep event" "0: WFE assertion can not trigger low power,1: WFE assertion can trigger low power" newline bitfld.long 0x4 0.--1. "CPU_MODE_TARGET,The CPU mode the CPU platform should transit to on next sleep event" "0: Stay in RUN mode,1: Transit to WAIT mode,2: Transit to STOP mode,3: Transit to SUSPEND mode" rgroup.long 0x14++0x7 line.long 0x0 "CMC_MODE_STAT,CPU mode Status" hexmask.long.byte 0x0 24.--28. 1. "FSM_STATE,CPU mode trans FSM state." newline bitfld.long 0x0 18. "WAKEUP_REQUEST,'ORed' of all unmasked IRQ in." "0,1" newline bitfld.long 0x0 17. "WFE_REQUEST,Status of standby_wfe input port" "0,1" newline bitfld.long 0x0 16. "SLEEP_REQUEST,Status of sleep_request input port" "0,1" newline bitfld.long 0x0 10. "SLEEPING_IDLE,Completed CPU mode and set point transition of sleep sequence in a sleeping_idle state." "0,1" newline bitfld.long 0x0 9. "WAKEUP_TRANS_BUSY,Busy on CPU mode transition of wakeup not include set point trans busy." "0,1" newline bitfld.long 0x0 8. "SLEEP_TRANS_BUSY,Busy on CPU mode transition of sleep not include set point trans busy." "0,1" newline bitfld.long 0x0 2.--3. "CPU_MODE_PREVIOUS,Previous CPU mode" "0: CPU was previously in RUN mode,1: CPU was previously in WAIT mode,2: CPU was previously in STOP mode,3: CPU was previously in SUSPEND mode" newline bitfld.long 0x0 0.--1. "CPU_MODE_CURRENT,Current CPU mode" "0: CPU is currently in RUN mode,1: CPU is currently in WAIT mode,2: CPU is currently in STOP mode,3: CPU is currently in SUSPEND mode" line.long 0x4 "CMC_PIN_STAT,CMC pin Status" bitfld.long 0x4 31. "DEBUG_WAKEUP_ACK_STAT,debug wakeup acknowledge pin status" "0,1" newline bitfld.long 0x4 29.--30. "CPU_MODE_STAT,cpu_power_mode pin status" "0,1,2,3" newline bitfld.long 0x4 25. "SYSMAN_DONE_STAT,cpu_mode_trans_sysman_done pin status." "0,1" newline bitfld.long 0x4 24. "MTR_DONE_STAT,cpu_mode_trans_mtr_done pin status" "0,1" newline bitfld.long 0x4 23. "POWER_DONE_STAT,cpu_mode_trans_power_done pin status" "0,1" newline bitfld.long 0x4 22. "RESET_DONE_STAT,cpu_mode_trans_reset_done pin status" "0,1" newline bitfld.long 0x4 21. "MEM_DONE_STAT,cpu_mode_trans_mem_done pin status" "0,1" newline bitfld.long 0x4 20. "ISO_DONE_STAT,cpu_mode_trans_iso_done pin status" "0,1" newline bitfld.long 0x4 19. "PLL_DONE_STAT,cpu_mode_trans_pll_done pin status" "0,1" newline bitfld.long 0x4 18. "LPCG_DONE_STAT,cpu_mode_trans_lpcg_done pin status" "0,1" newline bitfld.long 0x4 17. "SSAR_DONE_STAT,cpu_mode_trans_ssar_done pin status" "0,1" newline bitfld.long 0x4 16. "A55_HDSK_DONE_STAT,cpu_mode_trans_a55_hdsk_done pin status" "0,1" newline bitfld.long 0x4 9. "SYSMAN_REQUEST_STAT,cpu_mode_trans_sysman_request pin status" "0,1" newline bitfld.long 0x4 8. "MTR_REQUEST_STAT,cpu_mode_trans_mtr_request pin status" "0,1" newline bitfld.long 0x4 7. "POWER_REQUEST_STAT,cpu_mode_trans_power_request pin status" "0,1" newline bitfld.long 0x4 6. "RESET_REQUEST_STAT,cpu_mode_trans_reset_request pin status" "0,1" newline bitfld.long 0x4 5. "MEM_REQUEST_STAT,cpu_mode_trans_mem_request pin status" "0,1" newline bitfld.long 0x4 4. "ISO_REQUEST_STAT,cpu_mode_trans_iso_request pin status" "0,1" newline bitfld.long 0x4 3. "PLL_REQUEST_STAT,cpu_mode_trans_pll_request pin status" "0,1" newline bitfld.long 0x4 2. "LPCG_REQUEST_STAT,cpu_mode_trans_lpcg_request pin status" "0,1" newline bitfld.long 0x4 1. "SSAR_REQUEST_STAT,cpu_mode_trans_ssar_request pin status" "0,1" newline bitfld.long 0x4 0. "A55_HDSK_REQUEST_STAT,cpu_mode_trans_a55_hdsk_request pin status" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_MASK_[$1],IRQ wake-up mask register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_MASK,IRQ Wake-up mask" repeat.end group.long 0x140++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_MASK,CMC non-IRQ wakeup mask" bitfld.long 0x0 1. "DEBUG_WAKEUP_MASK,'1' means the debug_wakeup_request cannot wakeup CPU platform" "0,1" newline bitfld.long 0x0 0. "EVENT_WAKEUP_MASK,'1' means the event cannot wakeup CPU platform" "0,1" repeat 12. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x150)++0x3 line.long 0x0 "CMC_IRQ_WAKEUP_STAT_[$1],IRQ status register" hexmask.long 0x0 0.--31. 1. "IRQ_WAKEUP_STAT,IRQ status" repeat.end rgroup.long 0x190++0x3 line.long 0x0 "CMC_NON_IRQ_WAKEUP_STAT,CMC non-IRQ wakeup status" bitfld.long 0x0 1. "DEBUG_WAKEUP_STAT,Debug wakeup status" "0: No debug wakeup is requested,1: Debug wakeup is requested" newline bitfld.long 0x0 0. "EVENT_WAKEUP_STAT,Event wakeup status" "0: No event wakeup is requested,1: Event wakeup is requested" group.long 0x200++0x3 line.long 0x0 "CMC_SLEEP_A55_HDSK_CTRL,CMC sleep A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x208++0x3 line.long 0x0 "CMC_SLEEP_SSAR_CTRL,CMC sleep SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x210++0x3 line.long 0x0 "CMC_SLEEP_LPCG_CTRL,CMC sleep LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x218++0x3 line.long 0x0 "CMC_SLEEP_PLL_CTRL,CMC sleep PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x220++0x3 line.long 0x0 "CMC_SLEEP_ISO_CTRL,CMC sleep isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x228++0x3 line.long 0x0 "CMC_SLEEP_MEM_CTRL,CMC sleep memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x230++0x3 line.long 0x0 "CMC_SLEEP_RESET_CTRL,CMC sleep reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x238++0x3 line.long 0x0 "CMC_SLEEP_POWER_CTRL,CMC sleep power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x240++0x3 line.long 0x0 "CMC_SLEEP_RSV2_CTRL,CMC sleep rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x248++0x3 line.long 0x0 "CMC_SLEEP_SYSMAN_CTRL,CMC sleep Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE." group.long 0x288++0x3 line.long 0x0 "CMC_WAKEUP_RSV2_CTRL,CMC wakeup rsv2 control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x290++0x3 line.long 0x0 "CMC_WAKEUP_POWER_CTRL,CMC wakeup power control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x298++0x3 line.long 0x0 "CMC_WAKEUP_MEM_CTRL,CMC wakeup memory control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A0++0x3 line.long 0x0 "CMC_WAKEUP_RESET_CTRL,CMC wakeup reset control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2A8++0x3 line.long 0x0 "CMC_WAKEUP_ISO_CTRL,CMC wakeup isolation control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B0++0x3 line.long 0x0 "CMC_WAKEUP_PLL_CTRL,CMC wakeup PLL control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2B8++0x3 line.long 0x0 "CMC_WAKEUP_LPCG_CTRL,CMC wakeup LPCG control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C0++0x3 line.long 0x0 "CMC_WAKEUP_MTR_CTRL,CMC wakeup MTR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2C8++0x3 line.long 0x0 "CMC_WAKEUP_SSAR_CTRL,CMC wakeup SSAR control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D0++0x3 line.long 0x0 "CMC_WAKEUP_A55_HDSK_CTRL,CMC wakeup A55_HDSK control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x2D8++0x3 line.long 0x0 "CMC_WAKEUP_SYSMAN_CTRL,CMC wakeup Sysman control" bitfld.long 0x0 31. "DISABLE,Disable this step" "0: This step is enabled.,1: This step is disabled. GPC will skip this step.." newline bitfld.long 0x0 28.--29. "CNT_MODE,Count mode" "0: Counter disable mode: not use step counter step..,1: Counter delay mode: delay after receiving..,2: Ignore step_done response the counter starts to..,3: Time out mode the counter starts to count once.." newline hexmask.long.tbyte 0x0 0.--23. 1. "STEP_CNT,Step count usage depends on CNT_MODE" group.long 0x380++0x3 line.long 0x0 "CMC_SYS_SLEEP_CTRL,CMC system sleep control" rbitfld.long 0x0 17. "SYS_WAKEUP_BUSY,Indicates the CPU is busy exiting system sleep mode." "0,1" newline rbitfld.long 0x0 16. "SYS_SLEEP_BUSY,Indicates the CPU is busy entering system sleep mode." "0,1" newline bitfld.long 0x0 2. "SS_SUSPEND,Request system sleep when CPU is in SUSPEND mode" "0: Do not request system sleep when CPU is in..,1: Request system sleep when CPU is in SUSPEND mode" newline bitfld.long 0x0 1. "SS_STOP,Request system sleep when CPU is in STOP mode" "0: Do not request system sleep when CPU is in STOP..,1: Request system sleep when CPU is in STOP mode" newline bitfld.long 0x0 0. "SS_WAIT,Request system sleep when CPU is in WAIT mode" "0: Do not request system sleep when CPU is in WAIT..,1: Request system sleep when CPU is in WAIT mode" group.long 0x390++0x3 line.long 0x0 "CMC_DEBUG,CMC debug" bitfld.long 0x0 0. "PRETEND_SLEEP,Write 1 to force CMC into sleep. Used to debug GPC status. Locked by LOCK_CFG field." "0,1" tree.end tree.end tree "GPC_GLOBAL" base ad:0x44474800 group.long 0x4++0x3 line.long 0x0 "GPC_GLOB_AUTHEN_CTRL,GPC Global Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST is not locked,1: WHITE_LIST is locked" newline bitfld.long 0x0 11. "LOCK_SETTING,Lock NONSECURE and USER" "0: NONSECURE and USER fields are not locked,1: NONSECURE and USER fields are locked" newline bitfld.long 0x0 9. "NONSECURE,Allow non-secure mode access" "0: Allow only secure mode to access CPU mode..,1: Allow both secure and non-secure mode to access.." newline bitfld.long 0x0 8. "USER,Allow user mode access" "0: Allow only privilege mode to access CPU mode..,1: Allow both privilege and user mode to access CPU.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: The value of low power configuration fields are..,1: The value of low power configuration fields are.." group.long 0x18++0x7 line.long 0x0 "GPC_DOMAIN_SEL,GPC domain assignment select" bitfld.long 0x0 0. "DOMAIN_SEL,Domain select" "0: Domain assignment from register,1: Domain assignment from TRDC" line.long 0x4 "GPC_MASTER,GPC master CPU configuration" hexmask.long.word 0x4 0.--8. 1. "CPU_MASTER,Setting to 1 means CPU is the master CPU of its domain" group.long 0x40++0x3 line.long 0x0 "GPC_SYS_SLEEP,GPC system sleep control" hexmask.long.word 0x0 16.--24. 1. "FORCE_CPU_DISABLE,Force CPU into a system sleep status" repeat 9. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x50)++0x3 line.long 0x0 "GPC_CPU_DOMAIN_ASSIGNMENT[$1],GPC domain assignment" hexmask.long.byte 0x0 0.--3. 1. "CPU_DOMAIN,CPU domain assignment" repeat.end group.long 0x100++0xB line.long 0x0 "GPC_PMIC_CTRL,PMIC standby control from GPC" bitfld.long 0x0 0. "PMIC_STBY_EN,Assert the pmic standby request when system sleep" "0,1" line.long 0x4 "GPC_PMIC_PRE_DLY_CTRL,PMIC standby pre delay control" hexmask.long.word 0x4 16.--31. 1. "DLY_PRE_STBY_OFF,Delay before pmic_standby off. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--15. 1. "DLY_PRE_STBY_ON,Delay before pmic_standby on. Locked by LOCK_CFG field." line.long 0x8 "GPC_PMIC_STBY_ACK_CTRL,PMIC standby acknowledge control" bitfld.long 0x8 30.--31. "STBY_OFF_CNT_MODE,PMIC standby off acknowledge count mode. Locked by LOCK_CFG field." "0: Finish the process once pmic_standby signal..,1: Finish the process once getting acknowledge from..,2: Ignore PMIC acknowledge the delay counter starts..,3: Time out mode the counter starts to count once.." newline hexmask.long.word 0x8 16.--27. 1. "STBY_OFF_CNT_CFG,PMIC standby off acknowledge count configure. Usage depends on STBY_OFF_CNT_MODE. Locked by LOCK_CFG field." newline bitfld.long 0x8 14.--15. "STBY_ON_CNT_MODE,PMIC standby on acknowledge count mode. Locked by LOCK_CFG field." "0: Finish the process once pmic_standby signal..,1: Finish the process once getting acknowledge from..,2: Ignore PMIC acknowledge the delay counter starts..,3: Time out mode the counter starts to count once.." newline hexmask.long.word 0x8 0.--11. 1. "STBY_ON_CNT_CFG,PMIC standby on acknowledge count configure. Usage depends on STBY_ON_CNT_MODE. Locked by LOCK_CFG field." group.long 0x200++0xB line.long 0x0 "GPC_ROSC_CTRL,RCOSC control" bitfld.long 0x0 0. "ROSC_OFF_EN,Shut off the 24 MHz RCOSC clock when system sleep" "0: Keep 24 MHz ROSC clock running during system sleep,1: Shut off 24 MHz ROSC clock during system sleep" line.long 0x4 "GPC_AON_MEM_CTRL,AON Memory control" bitfld.long 0x4 0. "AON_MEM_LP_EN,AON memory enter LP enable" "0: Do not enter AON memories into retention during..,1: Enter AON memories into retention during system.." line.long 0x8 "GPC_EFUSE_CTRL,eFUSE control" bitfld.long 0x8 0. "EFUSE_PD_EN,eFUSE power down enable" "0: Do not Power Down efuse during system sleep,1: Power Down efuse during system sleep" tree.end tree "SRC_GENERAL_REG" base ad:0x44460000 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: LOCK_LIST and WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock TZ_NS and TZ_USER bits" "0: TZ_NS and TZ_USER value can be changed.,1: LOCK_TZ TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: General registers can only be written in secure..,1: General registers can be written either in.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: General registers can only be written in..,1: General registers can be written either in.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: General registers are not locked.,1: LOCK_CFG and registers in the list are locked." group.long 0x10++0xB line.long 0x0 "SCR,SRC Control Register" bitfld.long 0x0 14. "Boot_reset_release_VPUMIX,VPUMIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 13. "Boot_reset_release_NETCMIX,NETCMIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 12. "Boot_reset_release_M7MIX,M7MIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 11. "Boot_reset_release_GPUMIX,GPUMIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 10. "Boot_reset_release_DISPLAYMIX,DISPLAYMIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 9. "Boot_reset_release_DDRMIX,If M33 boot the DDRMIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 8. "Boot_reset_release_CAMERAMIX,CAMERAMIX will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 7. "Boot_reset_release_A55_PLAT,If M33 boot the CA55 Platform will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 6. "Boot_reset_release_A55_CPU5,If M33 boot the CA55 CPU5 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 5. "Boot_reset_release_A55_CPU4,If M33 boot the CA55 CPU4 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 4. "Boot_reset_release_A55_CPU3,If M33 boot the CA55 CPU3 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 3. "Boot_reset_release_A55_CPU2,If M33 boot the CA55 CPU2 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 2. "Boot_reset_release_A55_CPU1,If M33 boot the CA55 CPU1 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 1. "Boot_reset_release_A55_CPU0,If M33 boot the CA55 CPU0 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." newline bitfld.long 0x0 0. "Boot_reset_release_M33,If A55 boot the CM33 will be held under reset until boot core writes this bit to 1. Once this bit is set to 1 it will be locked." "0: Hold reset.,1: Release reset." line.long 0x4 "SRTMR,SRC RESET TRIGGER MODE REGISTER" hexmask.long.word 0x4 0.--13. 1. "RESET_EVT_MODE,Reset event behaviour configuration" line.long 0x8 "SRMASK,SRC RESET TRIGGER MODE REGISTER MASK" hexmask.long.word 0x8 0.--13. 1. "RESET_EVT_MASK,Reset event mask register" rgroup.long 0x40++0x7 line.long 0x0 "SBMR1,SRC Boot Mode Register 1" hexmask.long 0x0 0.--31. 1. "BOOT_CFG0,This bit field stores the BOOT_CFG8 fuse values. Please refer to the Fusemap for the fuse details." line.long 0x4 "SBMR2,SRC Boot Mode Register 2" bitfld.long 0x4 31. "DIR_BT_DIS,Stores the value of DIR_BT_DIS from fusemap. Please see the fusemap for fuse details." "0,1" newline hexmask.long.byte 0x4 24.--29. 1. "IPP_BOOT_MODE,Boot mode from pins" newline bitfld.long 0x4 22.--23. "CCMSRCGPCMIX_BLK_CTRL,Stores the value of CCMSRCGPCMIX_BLK_CTRL[1:0] from fusemap. Please see the fusemap for fuse details." "0,1,2,3" newline hexmask.long.byte 0x4 18.--21. 1. "BOOT_CFG2,This bit field stores the BOOT_CFG0[31:28] fuse values. Please refer to the Fusemap for the fuse details." newline bitfld.long 0x4 16. "SDP_DIS,Stores the value of SDP_DIS from fusemap. Please see the fusemap for fuse details." "0,1" newline hexmask.long.word 0x4 0.--15. 1. "BOOT_CFG1,This bit field stores the BOOT_CFG0[15:0] fuse values. Please refer to the Fusemap for the fuse details." group.long 0x4C++0x53 line.long 0x0 "SMRSR,SRC Mix Slices Reset Status Register" hexmask.long.tbyte 0x0 0.--20. 1. "RESET_DOMAIN_FLAG,Indicates which reset event request asserted the reset" line.long 0x4 "SRESR,SRC Reset Events Status Register" hexmask.long.word 0x4 1.--14. 1. "RESET_EVT_FLAG,Indicates which reset event request asserted the reset" newline eventfld.long 0x4 0. "SRC_POR_B_FLAG,Indicates whether the reset was the result of the system_por_b" "0: Reset is not asserted by system_por_b,1: Reset is asserted by system_por_b" line.long 0x8 "GPR1,SRC General Purpose Register 1" hexmask.long 0x8 0.--31. 1. "GPR,General purpose regsiter" line.long 0xC "GPR2,SRC General Purpose Register 2" hexmask.long 0xC 0.--31. 1. "GPR,General purpose regsiter" line.long 0x10 "GPR3,SRC General Purpose Register 3" hexmask.long 0x10 0.--31. 1. "GPR,General purpose regsiter" line.long 0x14 "GPR4,SRC General Purpose Register 4" hexmask.long 0x14 0.--31. 1. "GPR,General purpose regsiter" line.long 0x18 "GPR5,SRC General Purpose Register 5" hexmask.long 0x18 0.--31. 1. "GPR,General purpose regsiter" line.long 0x1C "GPR6,SRC General Purpose Register 6" hexmask.long 0x1C 0.--31. 1. "GPR,General purpose regsiter" line.long 0x20 "GPR7,SRC General Purpose Register 7" hexmask.long 0x20 0.--31. 1. "GPR,General purpose regsiter" line.long 0x24 "GPR8,SRC General Purpose Register 8" hexmask.long 0x24 0.--31. 1. "GPR,General purpose regsiter" line.long 0x28 "GPR9,SRC General Purpose Register 9" hexmask.long 0x28 0.--31. 1. "GPR,General purpose regsiter" line.long 0x2C "GPR10,SRC General Purpose Register 10" hexmask.long 0x2C 0.--31. 1. "GPR,General purpose regsiter" line.long 0x30 "GPR11,SRC General Purpose Register 11" hexmask.long 0x30 0.--31. 1. "GPR,General purpose regsiter" line.long 0x34 "GPR12,SRC General Purpose Register 12" hexmask.long 0x34 0.--31. 1. "GPR,General purpose regsiter" line.long 0x38 "GPR13,SRC General Purpose Register 13" hexmask.long 0x38 0.--31. 1. "GPR,General purpose regsiter" line.long 0x3C "GPR14,SRC General Purpose Register 14" hexmask.long 0x3C 0.--31. 1. "GPR,General purpose regsiter" line.long 0x40 "GPR15,SRC General Purpose Register 15" hexmask.long 0x40 0.--31. 1. "GPR,General purpose regsiter" line.long 0x44 "GPR16,SRC General Purpose Register 16" hexmask.long 0x44 0.--31. 1. "GPR,General purpose regsiter" line.long 0x48 "GPR17,SRC General Purpose Register 17" hexmask.long 0x48 0.--31. 1. "GPR,General purpose regsiter" line.long 0x4C "GPR18,SRC General Purpose Register 18" hexmask.long 0x4C 0.--31. 1. "GPR,General purpose regsiter" line.long 0x50 "GPR19,SRC General Purpose Register 19" hexmask.long 0x50 0.--31. 1. "GPR,General purpose regsiter" group.long 0x100++0x13 line.long 0x0 "GPR20,SRC General Purpose Register 20" hexmask.long 0x0 0.--31. 1. "GPR,General purpose regsiter" line.long 0x4 "CM_QUIESCE,SRC_CORTEX_M_QUIESCE" rbitfld.long 0x4 1. "SAFE_CM33_AHB_ACK_STAT,CM33 platform safe reset ahb ack status" "0: No CM33 platform safe reset req or it could not..,1: CM33 platform is in safe state for reset.." newline bitfld.long 0x4 0. "SAFE_CM33_AHB_REQ,CM33 platform safe reset req control" "0: No effect,1: request CM33 platform to be reset at safe state" line.long 0x8 "COLD_RESET_SSAR_ACK_CTRL,Cold reset SSAR acknowledge control" bitfld.long 0x8 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field" "0: Not use counter raise done to..,1: Delay after receiving EdgeLock Enclave ack delay..,2: Ignore EdgeLock Enclave ack raise done to..,3: Time out mode raise done to.." newline hexmask.long.word 0x8 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE locked by LOCK_CFG field" line.long 0xC "SP_ISO_CTRL,SRC special ISO Control" bitfld.long 0xC 14. "WAKEUPMIX_GPIO_ISO,Software control for WAKEUPMIX GPIO isolation enable" "0,1" newline bitfld.long 0xC 13. "WAKEUPMIX_EARC_PHY_ISO,Software control for WAKEUPMIX EARC PHY isolation enable" "0,1" newline bitfld.long 0xC 12. "NETCMIX_ETH_PHY_ISO,Software control for NETCMIX Ethernet PHY isolation enable" "0,1" newline bitfld.long 0xC 11. "HSIOMIX_USB2_PHY_ISO,Software control for HSIOMIX USB2 PHY isolation enable" "0,1" newline bitfld.long 0xC 10. "HSIOMIX_USB1_PHY_ISO,Software control for HSIOMIX USB1 PHY isolation enable" "0,1" newline bitfld.long 0xC 9. "HSIOMIX_PCIE2_PHY_ISO,Software control for HSIOMIX PCIe2 PHY isolation enable" "0,1" newline bitfld.long 0xC 8. "HSIOMIX_PCIE1_PHY_ISO,Software control for HSIOMIX PCIe1 PHY isolation enable" "0,1" newline bitfld.long 0xC 7. "DISPLAYMIX_PLL_ISO,Software control for DISPLAYMIX PLLs isolation enable" "0,1" newline bitfld.long 0xC 6. "DDRMIX_DDR_PHY_ISO,Software control for DDRMIX DDR PHY isolation enable" "0,1" newline bitfld.long 0xC 5. "DDRMIX_DRAM_PLL_ISO,Software control for DDRMIX DRAM PLL isolation enable" "0,1" newline bitfld.long 0xC 4. "CORTEXAMIX_MISC0_ISO,Software control for CORTEXAMIX Miscellaneous isolation enable for ARM_PLL Tempsense etc" "0,1" newline bitfld.long 0xC 3. "CAMERAMIX_MIPI_CSI1_ISO,Software control for CAMERAMIX MIPI CSI1 isolation enable" "0,1" newline bitfld.long 0xC 2. "CAMERAMIX_MIPI_DSICSI1_ISO,Software control for CAMERAMIX MIPI DSICSI1 isolation enable" "0,1" newline bitfld.long 0xC 1. "CAMERAMIX_MPLL_ISO,Software control for CAMERAMIX MPLL isolation enable" "0,1" newline bitfld.long 0xC 0. "ANAMIX_MISC0_ISO,Software control for ANAMIX Miscellaneous isolation enable for PLL TSENSOR etc" "0,1" line.long 0x10 "ROM_LP_CTRL,ROM Low Power Control" bitfld.long 0x10 0. "AONMIX_ROM_LP_EN,Low power control enable for ROM in AONMIX" "0,1" rgroup.long 0x114++0x3 line.long 0x0 "A55_DENY_STAT,A55 Q_Channel Deny Status" bitfld.long 0x0 7. "A55_CLUSTER_CLKOFF_DENY_STAT,A55 Cluster Q_Channel clockoff deny status" "0,1" newline bitfld.long 0x0 6. "A55_CLUSTER_PWRDN_DENY_STAT,A55 Cluster Q_Channel pwrdn deny status" "0,1" newline bitfld.long 0x0 5. "A55_CORE5_PWRDN_DENY_STAT,A55 CORE 5 Q_Channel pwrdn deny status" "0,1" newline bitfld.long 0x0 4. "A55_CORE4_PWRDN_DENY_STAT,A55 CORE 4 Q_Channel pwrdn deny status" "0,1" newline bitfld.long 0x0 3. "A55_CORE3_PWRDN_DENY_STAT,A55 CORE 3 Q_Channel pwrdn deny status" "0,1" newline bitfld.long 0x0 2. "A55_CORE2_PWRDN_DENY_STAT,A55 CORE 2 Q_Channel pwrdn deny status" "0,1" newline bitfld.long 0x0 1. "A55_CORE1_PWRDN_DENY_STAT,A55 CORE 1 Q_Channel pwrdn deny status" "0,1" newline bitfld.long 0x0 0. "A55_CORE0_PWRDN_DENY_STAT,A55 CORE 0 Q_Channel pwrdn deny status" "0,1" repeat 14. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x120)++0x3 line.long 0x0 "SRMR_[$1],SRC Reset Mode Register (SRMR)" hexmask.long.tbyte 0x0 0.--20. 1. "SRMR,A bit set to 1 means reset event can reset that particular reset domain." repeat.end tree.end tree "SRC_MEM_SLICE" tree "SRC_A55_L3_MEM" base ad:0x44466800 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_A55_SCU_MEM" base ad:0x44466400 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_A55C0_MEM" base ad:0x44465C00 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_A55C1_MEM" base ad:0x44466000 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_AON_MEM" base ad:0x44463800 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_DDR_MEM" base ad:0x44464000 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_DPHY_MEM" base ad:0x44464400 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_HSIO_MEM" base ad:0x44465400 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_MEDIA_MEM" base ad:0x44465800 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_ML_MEM" base ad:0x44464800 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_NIC_MEM" base ad:0x44464C00 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_NIC_OCRAM" base ad:0x44465000 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree "SRC_WKUP_MEM" base ad:0x44463C00 group.long 0x4++0x7 line.long 0x0 "MEM_CTRL,MEM Low Power Control" bitfld.long 0x0 24. "LOCK_CFG,Configuration lock" "0: Not locked.,1: Locked." hexmask.long.byte 0x0 16.--23. 1. "MEM_HF_CNT_CFG,MEM power up counter" newline hexmask.long.byte 0x0 8.--15. 1. "MEM_LF_CNT_CFG,MEM power up counter" bitfld.long 0x0 2. "MEM_LP_EN,Enable MEM low power control. Locked by LOCK_CFG field" "0,1" newline bitfld.long 0x0 1. "MEM_LP_MODE,MEM low power mode. Locked by LOCK_CFG field." "0: Power down mode,1: Retention mode" bitfld.long 0x0 0. "SW_MEM_CTRL,Software control MEM low power" "0: software control MEM to exit low power,1: software control MEM to enter low power" line.long 0x4 "MEMLP_CTRL_0,MEM Low Power Control_0" hexmask.long 0x4 0.--31. 1. "MEMLP_ENT_CNT,Delay counter to start entering to memory low power mode. Locked by LOCK_CFG field" group.long 0x10++0x7 line.long 0x0 "MEMLP_CTRL_1,MEM Low Power Control_1" hexmask.long 0x0 0.--31. 1. "MEMLP_RET_PGEN_CNT,Delay counter to interval for retn to pgen. Locked by LOCK_CFG field" line.long 0x4 "MEMLP_CTRL_2,MEM Low Power Control_2" hexmask.long 0x4 0.--31. 1. "MEMLP_EXT_CNT,Delay counter to start exiting from memory low power mode. Locked by LOCK_CFG field" rgroup.long 0x18++0x3 line.long 0x0 "MEM_STAT,MEM Status" bitfld.long 0x0 8. "MEM_STAT,MEM status" "0: MEM exit low power,1: MEM enter low power - rentention1 mode or power.." bitfld.long 0x0 6. "PGEN_STAT,PGEN status" "0,1" newline bitfld.long 0x0 5. "RET1N_STAT,RET1N status" "0,1" bitfld.long 0x0 4. "RET2N_STAT,RET2N status" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "MEM_FSM_STAT,MEM FSM status" tree.end tree.end tree "SRC_MIX_SLICE" tree "SRC_A55C0_SLICE" base ad:0x44462C00 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_A55C1_SLICE" base ad:0x44463000 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_A55P_SLICE" base ad:0x44463400 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_AON_SLICE" base ad:0x44460800 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_DDR_SLICE" base ad:0x44461000 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_DPHY_SLICE" base ad:0x44461400 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_EDGELOCK_SLICE" base ad:0x44460400 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_HSIO_SLICE" base ad:0x44462000 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_M33P_SLICE" base ad:0x44462800 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_MEDIA_SLICE" base ad:0x44462400 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_ML_SLICE" base ad:0x44461800 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_NIC_SLICE" base ad:0x44461C00 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree "SRC_WKUP_SLICE" base ad:0x44460C00 group.long 0x4++0x3 line.long 0x0 "AUTHEN_CTRL,Authentication Control" hexmask.long.word 0x0 16.--31. 1. "WHITE_LIST,Domain ID white list" newline bitfld.long 0x0 15. "LOCK_LIST,White list lock" "0: WHITE_LIST value can be changed.,1: WHITE_LIST value cannot be changed." newline bitfld.long 0x0 11. "LOCK_TZ,Lock NONSECURE and USER" "0: TZ_NS and TZ_USER value can be changed.,1: TZ_NS and TZ_USER value cannot be changed." newline bitfld.long 0x0 9. "TZ_NS,Allow non-secure mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 8. "TZ_USER,Allow user mode access" "0: This MIX SLICE registers can only be written in..,1: This MIX SLICE registers can be written either.." newline bitfld.long 0x0 7. "LOCK_CFG,Configuration lock" "0: Low power configuration fields are not locked.,1: Low power configuration fields are locked." newline bitfld.long 0x0 2. "LPM_MODE,Low power control mode" "0: Low power mode controlled by software,1: Low power mode controlled by GPC hardware" group.long 0x10++0xB line.long 0x0 "LPM_SETTING_0,LPM Setting 0" bitfld.long 0x0 0.--2. "LPM_SETTING_CD,LPM setting of current domain" "0,1,2,3,4,5,6,7" line.long 0x4 "LPM_SETTING_1,LPM Setting 1" bitfld.long 0x4 28.--30. "LPM_SETTING_D7,LPM setting of domain 7" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 24.--26. "LPM_SETTING_D6,LPM setting of domain 6" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 20.--22. "LPM_SETTING_D5,LPM setting of domain 5" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 16.--18. "LPM_SETTING_D4,LPM setting of domain 4" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 12.--14. "LPM_SETTING_D3,LPM setting of domain 3" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 8.--10. "LPM_SETTING_D2,LPM setting of domain 2" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 4.--6. "LPM_SETTING_D1,LPM setting of domain 1" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x4 0.--2. "LPM_SETTING_D0,LPM setting of domain 0" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" line.long 0x8 "LPM_SETTING_2,LPM Setting 2" bitfld.long 0x8 28.--30. "LPM_SETTING_D15,LPM setting of domain 15" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 24.--26. "LPM_SETTING_D14,LPM setting of domain 14" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 20.--22. "LPM_SETTING_D13,LPM setting of domain 13" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 16.--18. "LPM_SETTING_D12,LPM setting of domain 12" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 12.--14. "LPM_SETTING_D11,LPM setting of domain 11" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 8.--10. "LPM_SETTING_D10,LPM setting of domain 10" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 4.--6. "LPM_SETTING_D9,LPM setting of domain 9" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" newline bitfld.long 0x8 0.--2. "LPM_SETTING_D8,LPM setting of domain 8" "0: Power always off,1: power on when domain n is in RUN off in..,2: power on when domain n is in RUN/WAIT off in..,3: power on when domain n is in RUN/WAIT/STOP off..,4: power always on,5: power always on,6: power always on,7: power always on" group.long 0x20++0x7 line.long 0x0 "SLICE_SW_CTRL,Slice software control" bitfld.long 0x0 31. "PDN_SOFT,Software power trans control including reset iso and power switch. Locked by LPM_MODE field." "0: No effect or software power up,1: Software power down" newline hexmask.long.byte 0x0 24.--30. 1. "ISO_CTRL_SOFT,Software isolation control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 20.--23. 1. "RST_CTRL_SOFT,Software reset control. Locked by LPM_MODE field." newline hexmask.long.byte 0x0 16.--19. 1. "SAFE_RESET,Only for CM33 safe reset feature" newline bitfld.long 0x0 14. "MEM_PGEN_ACK_SW_OVERRIDE,Software Override for Memory acknowledge signal 'PRDYN'" "0: No effect. HW will wait for 'PRDYN' ack from..,1: HW will NOT wait for 'PRDYN' ack from memory for.." newline bitfld.long 0x0 12. "SYSMAN_CTRL_SOFT,Software System manager handshake control. Locked by LPM_MODE field." "0: No effect or software notify System manager..,1: Software notifySystem manager power down info" newline bitfld.long 0x0 10. "A55_HDSK_CTRL_SOFT,Software A55 handshake control. Locked by LPM_MODE field." "0: No effect or software notify A55 power up info,1: Software notify A55 power down info" newline bitfld.long 0x0 8. "SSAR_CTRL_SOFT,Software SSAR control. Locked by LPM_MODE field." "0: No effect or software SSAR restore,1: Software SSAR save" newline bitfld.long 0x0 6. "MTR_LOAD_SOFT,Software control MTR repair load. Locked by LPM_MODE field." "0: No effect,1: Software load MTR repair" newline bitfld.long 0x0 4. "PSW_CTRL_SOFT,Software power switch control. Locked by LPM_MODE field." "0: No effect or software power switch on,1: Software power switch off" line.long 0x4 "SINGLE_RESET_SW_CTRL,Single reset by software control" bitfld.long 0x4 10. "RST_CTRL_SOFT_5,Locked by LPM_MODE field." "0: software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 8. "RST_CTRL_SOFT_4,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 6. "RST_CTRL_SOFT_3,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 4. "RST_CTRL_SOFT_2,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 2. "RST_CTRL_SOFT_1,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" newline bitfld.long 0x4 0. "RST_CTRL_SOFT_0,Locked by LPM_MODE field." "0: Software reset assert,1: No effect or software reset deassert" group.long 0x40++0x3 line.long 0x0 "A55_HDSK_ACK_CTRL,A55 handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise a55_hdsk done to GPC once..,1: Delay after receiving a55 ack delay cycle number..,2: Ignore A55 ack raise a55_hdsk done to GPC when..,3: Time out mode raise a55_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "A55_HDSK_CNT_CFG,A55 handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x44++0x3 line.long 0x0 "A55_HDSK_ACK_STAT,A55 handshake acknowledge status" bitfld.long 0x0 31. "BUSY_A55_PUP_HDSK,Busy requesting A55 power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_A55_PDN_HDSK,Busy requesting A55 power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,A55 handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,A55 handshake power down acknowledge count." group.long 0x48++0x3 line.long 0x0 "SYSMAN_ACK_CTRL,System Manager handshake acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise sysman_hdsk done to GPC..,1: Delay after receiving system manager ack delay..,2: Ignore system manager ack raise sysman_hdsk done..,3: Time out mode raise sysman_hdsk done to GPC when.." newline hexmask.long.byte 0x0 0.--7. 1. "SYSMAN_CNT_CFG,System Manager handshake count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x4C++0x3 line.long 0x0 "SYSMAN_ACK_STAT,System manager handshake acknowledge status" bitfld.long 0x0 31. "BUSY_SYSMAN_PUP,Busy requesting System manager power up handshake" "0,1" newline bitfld.long 0x0 30. "BUSY_SYSMAN_PDN,Busy requesting System Manager power down handshake" "0,1" newline hexmask.long.byte 0x0 16.--23. 1. "PUP_ACK_CNT,System manager handshake power up acknowledge count" newline hexmask.long.byte 0x0 0.--7. 1. "PDN_ACK_CNT,System manager handshake power down acknowledge count." group.long 0x50++0x3 line.long 0x0 "SSAR_ACK_CTRL,SSAR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise ssar_save/restore done to..,1: Delay after receiving Edgelock Enclave ack delay..,2: Ignore Edgelock Enclave ack raise..,3: Time out mode raise ssar_save/restore done to.." newline hexmask.long.word 0x0 0.--13. 1. "SSAR_CNT_CFG,ssar count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x54++0x3 line.long 0x0 "SSAR_ACK_STAT,SSAR acknowledge status" bitfld.long 0x0 31. "BUSY_RESTORE,Busy requesting SSAR restore" "0,1" newline bitfld.long 0x0 30. "BUSY_SAVED,Busy requesting SSAR save" "0,1" newline bitfld.long 0x0 29. "SAVED,Indicate this mix power down info have accepted Edgelock Enclave ack" "0,1" newline hexmask.long.word 0x0 14.--27. 1. "RESTORE_ACK_CNT,RESTORE acknowledge count record the delay from stat change to acknowledge received" newline hexmask.long.word 0x0 0.--13. 1. "SAVE_ACK_CNT,SAVE acknowledge count record the delay from stat change to acknowledge received" group.long 0x5C++0xF line.long 0x0 "ISO_OFF_DLY_POR,iso off delay control when por" hexmask.long 0x0 0.--31. 1. "DLY_PRE_ISO_OFF_POR,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0x4 "ISO_ON_DLY,iso on delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_ISO_ON,Delay from receiving iso_on request to isolation enable. Locked by LOCK_CFG field." line.long 0x8 "ISO_OFF_DLY,iso off delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_ISO_OFF,Delay from receiving iso off request to isolation disable. Locked by LOCK_CFG field." line.long 0xC "PSW_OFF_LF_DLY,psw off lf delay control" hexmask.long 0xC 0.--31. 1. "DLY_PRE_PSW_OFF_LF,Delay from receiving power off lf request to power switch shut off. Locked by LOCK_CFG field." group.long 0x70++0xB line.long 0x0 "PSW_OFF_HF_DLY,psw off hf delay control" hexmask.long 0x0 0.--31. 1. "DLY_PRE_PSW_OFF_HF,Delay from receiving power off hf request to power switch shut off. Locked by LOCK_CFG field." line.long 0x4 "PSW_ON_LF_DLY,psw on lf delay control" hexmask.long 0x4 0.--31. 1. "DLY_PRE_PSW_ON_LF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." line.long 0x8 "PSW_ON_HF_DLY,psw on hf delay control" hexmask.long 0x8 0.--31. 1. "DLY_PRE_PSW_ON_HF,Delay from receiving power on lf request to power switch turns on. Locked by LOCK_CFG field." group.long 0x80++0x7 line.long 0x0 "PSW_ACK_CTRL_0,Power switch acknowledge control" bitfld.long 0x0 31. "HF_ACK_INVERT,HF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 30. "LF_ACK_INVERT,LF Acknowledge value is inverted from power switch control. Locked by LOCK_CFG field." "0,1" newline bitfld.long 0x0 28.--29. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise power_on/off done to GPC..,1: Delay after receiving psw ack delay cycle number..,2: Ignore psw ack raise power_on/off done to GPC..,3: Time out mode raise power_on/off done to GPC.." newline hexmask.long.word 0x0 16.--25. 1. "PUP_HF_CNT_CFG,PUP HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x0 0.--9. 1. "PUP_LF_CNT_CFG,PUP LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." line.long 0x4 "PSW_ACK_CTRL_1,Power switch acknowledge control" hexmask.long.word 0x4 16.--25. 1. "PDN_HF_CNT_CFG,PDN HF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." newline hexmask.long.word 0x4 0.--9. 1. "PDN_LF_CNT_CFG,PDN LF Count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x88++0x3 line.long 0x0 "PSW_ACK_STAT,PSW acknowledge status" bitfld.long 0x0 31. "HF_ACK_STAT,HF PSW acknowledge status" "0,1" newline bitfld.long 0x0 30. "LF_ACK_STAT,LF PSW acknowledge status" "0,1" newline hexmask.long.word 0x0 16.--25. 1. "HF_ACK_CNT,HF PSW acknowledge count" newline hexmask.long.word 0x0 0.--9. 1. "LF_ACK_CNT,LF PSW acknowledge count" group.long 0x90++0x3 line.long 0x0 "MTR_ACK_CTRL,MTR acknowledge control" bitfld.long 0x0 30.--31. "CNT_MODE,Configure the acknowledge counter working mode. Locked by LOCK_CFG field." "0: Not use counter raise mtr done to GPC once get..,1: Delay after receiving MTR ack delay cycle number..,2: Ignore MTR ack raise mtr done to GPC when..,3: Time out mode raise mtr done to GPC when either.." newline hexmask.long.byte 0x0 0.--7. 1. "MTR_CNT_CFG,MTR count configure. Usage depends on CNT_MODE. Locked by LOCK_CFG field." rgroup.long 0x94++0x3 line.long 0x0 "MTR_ACK_STAT,MTR acknowledge status" bitfld.long 0x0 31. "BUSY_MTR,Busy requesting MTR" "0,1" newline bitfld.long 0x0 30. "MTR_DONE,Indicate MTR load repair finished" "0,1" newline hexmask.long.byte 0x0 0.--7. 1. "MTR_ACK_CNT,MTR acknowledge count record the delay from stat change to acknowledge received" rgroup.long 0xA0++0x17 line.long 0x0 "UPI_STAT_0,UPI status 0" hexmask.long.word 0x0 16.--31. 1. "UPI_POWER_REQUEST,CPU mode trans power request of 16 domains" newline hexmask.long.word 0x0 0.--15. 1. "UPI_ISO_REQUEST,CPU mode trans iso request of 16 domains" line.long 0x4 "UPI_STAT_1,UPI status 1" hexmask.long.word 0x4 16.--31. 1. "UPI_SSAR_REQUEST,CPU mode trans ssar request of 16 domains" newline hexmask.long.word 0x4 0.--15. 1. "UPI_RESET_REQUEST,CPU mode trans reset request of 16 domains" line.long 0x8 "UPI_STAT_2,UPI status 2" hexmask.long.word 0x8 16.--31. 1. "UPI_A55_HDSK_REQUEST,CPU mode trans A55 handshake request of 16 domains" newline hexmask.long.word 0x8 0.--15. 1. "UPI_MTR_REQUEST,CPU mode trans mtr request of 16 domains" line.long 0xC "UPI_STAT_3,UPI status 3" hexmask.long.word 0xC 16.--31. 1. "UPI_SYSMAN_REQUEST,CPU mode trans system manager request of 16 domains" newline hexmask.long.word 0xC 0.--15. 1. "UPI_MEM_REQUEST,CPU mode trans mem request of 16 domains" line.long 0x10 "FSM_STAT,FSM status" hexmask.long.byte 0x10 28.--31. 1. "SYSMAN_STAT,System Manager handshake FSM status" newline bitfld.long 0x10 24.--26. "MEM_STAT,Memory FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 20.--23. 1. "A55_HDSK_STAT,A55 handshake FSM status" newline bitfld.long 0x10 16.--18. "SSAR_STAT,SSAR FSM status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 12.--14. "MTR_STAT,MTR FSM status" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x10 8.--11. 1. "ISO_STAT,Isolation FSM status" newline hexmask.long.byte 0x10 4.--7. 1. "RST_STAT,Reset FSM status" newline hexmask.long.byte 0x10 0.--3. 1. "PSW_STAT,Power switch FSM status" line.long 0x14 "FUNC_STAT,function status" bitfld.long 0x14 14. "SYSMAN_STAT,System Manager handshake status" "0: No effect or power up handshake with SYSMAN done,1: Power down handshake with SYSMAN done" newline bitfld.long 0x14 12. "MEM_STAT,Memory w/ status" "0: No effect or memory w/ exit LP done,1: Memory w/ enter LP done" newline bitfld.long 0x14 10. "A55_HDSK_STAT,A55 handshake status" "0: No effect or power up handshake with A55..,1: Power down handshake with A55 done(just for A55.." newline bitfld.long 0x14 8. "SSAR_STAT,ssar status" "0: No effect or power up handshake with Edgelock..,1: Power down handshake with Edgelock Enclave done" newline bitfld.long 0x14 6. "MTR_STAT,MTR status" "0: No effect,1: Memory repair/trim done" newline bitfld.long 0x14 4. "ISO_STAT,Isolation status" "0: Isolation off,1: Isolation on" newline bitfld.long 0x14 2. "RST_STAT,Reset status" "0: Reset assert,1: Reset release" newline bitfld.long 0x14 0. "PSW_STAT,Power switch status" "0: Power switch on,1: Power switch off" tree.end tree.end tree.end tree "CORTEXA_FRACT_PLL" base ad:0x44481600 group.long 0x0++0x2F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" group.long 0x60++0xF line.long 0x0 "DIV,PLL Dividers Register" hexmask.long.word 0x0 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x0 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x0 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x4 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x4 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x4 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x8 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x8 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x8 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0xC "DIV_TOG,PLL Dividers Register" hexmask.long.word 0xC 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0xC 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 0.--7. 1. "ODIV,Output frequency divider for clock output" rgroup.long 0xF0++0x3 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" tree.end tree "CORTEXA_TCU" base ad:0x4A400000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" hexmask.long.word 0x0 1.--9. 1. "tcu_fuse_obs,fuse observation" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree "CORTEXA_TMPSNS" base ad:0x4A440000 group.long 0x0++0x4F line.long 0x0 "CTRL0,Control 0" bitfld.long 0x0 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x0 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline bitfld.long 0x0 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." newline bitfld.long 0x0 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." newline bitfld.long 0x0 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." line.long 0x4 "CTRL0_SET,Control 0" bitfld.long 0x4 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0,1" newline bitfld.long 0x4 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0,1" newline bitfld.long 0x4 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0,1" newline bitfld.long 0x4 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x4 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline bitfld.long 0x4 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0,1" newline bitfld.long 0x4 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0,1" newline bitfld.long 0x4 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0,1" newline bitfld.long 0x4 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0,1,2,3" newline bitfld.long 0x4 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0,1,2,3" newline bitfld.long 0x4 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0,1,2,3" line.long 0x8 "CTRL0_CLR,Control 0" eventfld.long 0x8 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0,1" newline eventfld.long 0x8 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0,1" newline eventfld.long 0x8 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0,1" newline eventfld.long 0x8 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x8 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline eventfld.long 0x8 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0,1" newline eventfld.long 0x8 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0,1" newline eventfld.long 0x8 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0,1" newline eventfld.long 0x8 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0,1,2,3" newline eventfld.long 0x8 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0,1,2,3" newline eventfld.long 0x8 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0,1,2,3" line.long 0xC "CTRL0_TOG,Control 0" bitfld.long 0xC 22. "FILT2_CNT_CLR,Filter2 Counter Clear" "0,1" newline bitfld.long 0xC 21. "FILT1_CNT_CLR,Filter1 Counter Clear" "0,1" newline bitfld.long 0xC 20. "FILT0_CNT_CLR,Filter0 Counter Clear" "0,1" newline bitfld.long 0xC 16. "DRDY0_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0xC 12.--15. 1. "N_FILT_0,Filter Length for Threshold Flag" newline bitfld.long 0xC 10. "THR2_IE,Threshold2 Comparator Interrupt Enable" "0,1" newline bitfld.long 0xC 9. "THR1_IE,Threshold1 Comparator Interrupt Enable" "0,1" newline bitfld.long 0xC 8. "THR0_IE,Threshold0 Comparator Interrupt Enable" "0,1" newline bitfld.long 0xC 4.--5. "THR2_MODE,Threshold2 Comparator Mode" "0,1,2,3" newline bitfld.long 0xC 2.--3. "THR1_MODE,Threshold1 Comparator Mode" "0,1,2,3" newline bitfld.long 0xC 0.--1. "THR0_MODE,Threshold0 Comparator Mode" "0,1,2,3" line.long 0x10 "STAT0,Status 0" rbitfld.long 0x10 31. "IDLE,Idle State" "0: Conversion,1: Idle" newline rbitfld.long 0x10 16. "DRDY0_IF,Data Ready Flag" "0: No new data,1: New data" newline rbitfld.long 0x10 14. "THR2_STAT,Threshold2 State" "0,1" newline rbitfld.long 0x10 13. "THR1_STAT,Threshold1 State" "0,1" newline rbitfld.long 0x10 12. "THR0_STAT,Threshold0 State" "0,1" newline eventfld.long 0x10 10. "THR2_IF,Threshold2 Status Flag" "0: Event did not occur,1: Event occurred" newline eventfld.long 0x10 9. "THR1_IF,Threshold1 Status Flag" "0: Event did not occur,1: Event occurred" newline eventfld.long 0x10 8. "THR0_IF,Threshold0 Status Flag" "0: Event did not occur,1: Event occurred" line.long 0x14 "STAT0_SET,Status 0" rbitfld.long 0x14 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x14 16. "DRDY0_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x14 14. "THR2_STAT,Threshold2 State" "0,1" newline rbitfld.long 0x14 13. "THR1_STAT,Threshold1 State" "0,1" newline rbitfld.long 0x14 12. "THR0_STAT,Threshold0 State" "0,1" newline bitfld.long 0x14 10. "THR2_IF,Threshold2 Status Flag" "0,1" newline bitfld.long 0x14 9. "THR1_IF,Threshold1 Status Flag" "0,1" newline bitfld.long 0x14 8. "THR0_IF,Threshold0 Status Flag" "0,1" line.long 0x18 "STAT0_CLR,Status 0" eventfld.long 0x18 31. "IDLE,Idle State" "0,1" newline eventfld.long 0x18 16. "DRDY0_IF,Data Ready Flag" "0,1" newline eventfld.long 0x18 14. "THR2_STAT,Threshold2 State" "0,1" newline eventfld.long 0x18 13. "THR1_STAT,Threshold1 State" "0,1" newline eventfld.long 0x18 12. "THR0_STAT,Threshold0 State" "0,1" newline eventfld.long 0x18 10. "THR2_IF,Threshold2 Status Flag" "0,1" newline eventfld.long 0x18 9. "THR1_IF,Threshold1 Status Flag" "0,1" newline eventfld.long 0x18 8. "THR0_IF,Threshold0 Status Flag" "0,1" line.long 0x1C "STAT0_TOG,Status 0" rbitfld.long 0x1C 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x1C 16. "DRDY0_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x1C 14. "THR2_STAT,Threshold2 State" "0,1" newline rbitfld.long 0x1C 13. "THR1_STAT,Threshold1 State" "0,1" newline rbitfld.long 0x1C 12. "THR0_STAT,Threshold0 State" "0,1" newline bitfld.long 0x1C 10. "THR2_IF,Threshold2 Status Flag" "0,1" newline bitfld.long 0x1C 9. "THR1_IF,Threshold1 Status Flag" "0,1" newline bitfld.long 0x1C 8. "THR0_IF,Threshold0 Status Flag" "0,1" line.long 0x20 "DATA0,Data 0" hexmask.long.word 0x20 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x24 "DATA0_SET,Data 0" hexmask.long.word 0x24 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x28 "DATA0_CLR,Data 0" hexmask.long.word 0x28 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x2C "DATA0_TOG,Data 0" hexmask.long.word 0x2C 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x30 "THR_CTRL01,Threshold Control 01" hexmask.long.word 0x30 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x30 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x34 "THR_CTRL01_SET,Threshold Control 01" hexmask.long.word 0x34 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x34 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x38 "THR_CTRL01_CLR,Threshold Control 01" hexmask.long.word 0x38 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x38 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x3C "THR_CTRL01_TOG,Threshold Control 01" hexmask.long.word 0x3C 16.--31. 1. "TEMPERATURE_THRESHOLD1,Temperature Threshold1" newline hexmask.long.word 0x3C 0.--15. 1. "TEMPERATURE_THRESHOLD0,Temperature Threshold0" line.long 0x40 "THR_CTRL23,Threshold Control 23" hexmask.long.word 0x40 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" line.long 0x44 "THR_CTRL23_SET,Threshold Control 23" hexmask.long.word 0x44 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" line.long 0x48 "THR_CTRL23_CLR,Threshold Control 23" hexmask.long.word 0x48 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" line.long 0x4C "THR_CTRL23_TOG,Threshold Control 23" hexmask.long.word 0x4C 0.--15. 1. "TEMPERATURE_THRESHOLD2,Temperature Threshold2" group.long 0x200++0x2F line.long 0x0 "CTRL1,Control 1" bitfld.long 0x0 31. "ENABLE,Enable TEMPSENSE" "0: Disable,1: Enable" newline bitfld.long 0x0 30. "START,Start Measurement" "0: No effect,1: Start the measurement" newline bitfld.long 0x0 29. "STOP,Stop Measurement" "0: Cleared by the HW after conversion is stopped.,1: Stops the conversion." newline bitfld.long 0x0 24.--25. "MEAS_MODE,Measurement Mode" "0: Single One-Shot Measurement,1: Continuous Measurement,2: Periodic One-Shot Measurement,?" newline bitfld.long 0x0 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0: Settles to 0 after clearing the counter,1: Clear the internal counter" newline bitfld.long 0x0 18.--19. "RESOLUTION,Resolution Mode" "0: 0.59325 ms,1: 1.10525 ms,2: 2.12925 ms,3: 4.17725 ms" newline bitfld.long 0x0 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x0 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline bitfld.long 0x0 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." newline bitfld.long 0x0 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0: Less than or equal to threshold,1: Greater than threshold,2: Temperature data transition is from high to low..,3: Temperature data transition is from low to high.." line.long 0x4 "CTRL1_SET,Control 1" bitfld.long 0x4 31. "ENABLE,Enable TEMPSENSE" "0,1" newline bitfld.long 0x4 30. "START,Start Measurement" "0,1" newline bitfld.long 0x4 29. "STOP,Stop Measurement" "0,1" newline bitfld.long 0x4 24.--25. "MEAS_MODE,Measurement Mode" "0,1,2,3" newline bitfld.long 0x4 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0,1" newline bitfld.long 0x4 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0,1" newline bitfld.long 0x4 18.--19. "RESOLUTION,Resolution Mode" "0,1,2,3" newline bitfld.long 0x4 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0,1" newline bitfld.long 0x4 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x4 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline bitfld.long 0x4 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0,1" newline bitfld.long 0x4 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0,1" newline bitfld.long 0x4 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0,1,2,3" newline bitfld.long 0x4 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0,1,2,3" line.long 0x8 "CTRL1_CLR,Control 1" eventfld.long 0x8 31. "ENABLE,Enable TEMPSENSE" "0,1" newline eventfld.long 0x8 30. "START,Start Measurement" "0,1" newline eventfld.long 0x8 29. "STOP,Stop Measurement" "0,1" newline eventfld.long 0x8 24.--25. "MEAS_MODE,Measurement Mode" "0,1,2,3" newline eventfld.long 0x8 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0,1" newline eventfld.long 0x8 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0,1" newline eventfld.long 0x8 18.--19. "RESOLUTION,Resolution Mode" "0,1,2,3" newline eventfld.long 0x8 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0,1" newline eventfld.long 0x8 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0x8 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline eventfld.long 0x8 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0,1" newline eventfld.long 0x8 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0,1" newline eventfld.long 0x8 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0,1,2,3" newline eventfld.long 0x8 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0,1,2,3" line.long 0xC "CTRL1_TOG,Control 1" bitfld.long 0xC 31. "ENABLE,Enable TEMPSENSE" "0,1" newline bitfld.long 0xC 30. "START,Start Measurement" "0,1" newline bitfld.long 0xC 29. "STOP,Stop Measurement" "0,1" newline bitfld.long 0xC 24.--25. "MEAS_MODE,Measurement Mode" "0,1,2,3" newline bitfld.long 0xC 21. "FILT5_CNT_CLR,Filter5 Counter Clear" "0,1" newline bitfld.long 0xC 20. "FILT4_CNT_CLR,Filter4 Counter Clear" "0,1" newline bitfld.long 0xC 18.--19. "RESOLUTION,Resolution Mode" "0,1,2,3" newline bitfld.long 0xC 17. "DBG_DRDY_IE,Debug ADCOUT Data-Ready Interrupt Enable" "0,1" newline bitfld.long 0xC 16. "DRDY1_IE,Data-Ready Interrupt Enable" "0,1" newline hexmask.long.byte 0xC 12.--15. 1. "N_FILT_1,Filter Length for Threshold Flag" newline bitfld.long 0xC 9. "THR5_IE,Threshold Comparator5 Interrupt Enable" "0,1" newline bitfld.long 0xC 8. "THR4_IE,Threshold Comparator4 Interrupt Enable" "0,1" newline bitfld.long 0xC 2.--3. "THR5_MODE,Threshold5 Comparator Mode" "0,1,2,3" newline bitfld.long 0xC 0.--1. "THR4_MODE,Threshold4 Comparator Mode" "0,1,2,3" line.long 0x10 "STAT1,Status 1" rbitfld.long 0x10 31. "IDLE,Idle State" "0: Conversion,1: Idle" newline rbitfld.long 0x10 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0: No new data,1: New data" newline rbitfld.long 0x10 16. "DRDY1_IF,Data Ready Flag" "0: No new data,1: New data" newline rbitfld.long 0x10 13. "THR5_STAT,Threshold5 State" "0,1" newline rbitfld.long 0x10 12. "THR4_STAT,Threshold4 State" "0,1" newline eventfld.long 0x10 9. "THR5_IF,Threshold5 Status Flag" "0: Event did not occur,1: Event occurred" newline eventfld.long 0x10 8. "THR4_IF,Threshold4 Status Flag" "0: Event did not occur,1: Event occurred" line.long 0x14 "STAT1_SET,Status 1" rbitfld.long 0x14 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x14 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0,1" newline rbitfld.long 0x14 16. "DRDY1_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x14 13. "THR5_STAT,Threshold5 State" "0,1" newline rbitfld.long 0x14 12. "THR4_STAT,Threshold4 State" "0,1" newline bitfld.long 0x14 9. "THR5_IF,Threshold5 Status Flag" "0,1" newline bitfld.long 0x14 8. "THR4_IF,Threshold4 Status Flag" "0,1" line.long 0x18 "STAT1_CLR,Status 1" eventfld.long 0x18 31. "IDLE,Idle State" "0,1" newline eventfld.long 0x18 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0,1" newline eventfld.long 0x18 16. "DRDY1_IF,Data Ready Flag" "0,1" newline eventfld.long 0x18 13. "THR5_STAT,Threshold5 State" "0,1" newline eventfld.long 0x18 12. "THR4_STAT,Threshold4 State" "0,1" newline eventfld.long 0x18 9. "THR5_IF,Threshold5 Status Flag" "0,1" newline eventfld.long 0x18 8. "THR4_IF,Threshold4 Status Flag" "0,1" line.long 0x1C "STAT1_TOG,Status 1" rbitfld.long 0x1C 31. "IDLE,Idle State" "0,1" newline rbitfld.long 0x1C 17. "DBG_DRDY_IF,Debug ADCOUT Data Valid Flag" "0,1" newline rbitfld.long 0x1C 16. "DRDY1_IF,Data Ready Flag" "0,1" newline rbitfld.long 0x1C 13. "THR5_STAT,Threshold5 State" "0,1" newline rbitfld.long 0x1C 12. "THR4_STAT,Threshold4 State" "0,1" newline bitfld.long 0x1C 9. "THR5_IF,Threshold5 Status Flag" "0,1" newline bitfld.long 0x1C 8. "THR4_IF,Threshold4 Status Flag" "0,1" line.long 0x20 "DATA1,Data 1" hexmask.long.word 0x20 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x24 "DATA1_SET,Data 1" hexmask.long.word 0x24 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x28 "DATA1_CLR,Data 1" hexmask.long.word 0x28 0.--15. 1. "DATA_VAL,Temperature Data Value" line.long 0x2C "DATA1_TOG,Data 1" hexmask.long.word 0x2C 0.--15. 1. "DATA_VAL,Temperature Data Value" group.long 0x250++0xF line.long 0x0 "THR_CTRL45,Threshold Control 45" hexmask.long.word 0x0 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0x0 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" line.long 0x4 "THR_CTRL45_SET,Threshold Control 45" hexmask.long.word 0x4 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0x4 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" line.long 0x8 "THR_CTRL45_CLR,Threshold Control 45" hexmask.long.word 0x8 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0x8 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" line.long 0xC "THR_CTRL45_TOG,Threshold Control 45" hexmask.long.word 0xC 16.--31. 1. "TEMPERATURE_THRESHOLD5,Temperature Threshold5" newline hexmask.long.word 0xC 0.--15. 1. "TEMPERATURE_THRESHOLD4,Temperature Threshold4" group.long 0x270++0x13 line.long 0x0 "PERIOD_CTRL,Measurement Period Control" hexmask.long.tbyte 0x0 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0x4 "PERIOD_CTRL_SET,Measurement Period Control" hexmask.long.tbyte 0x4 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0x8 "PERIOD_CTRL_CLR,Measurement Period Control" hexmask.long.tbyte 0x8 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0xC "PERIOD_CTRL_TOG,Measurement Period Control" hexmask.long.tbyte 0xC 0.--23. 1. "MEAS_FREQ,TEMPSENSE Periodic Measurement Frequency" line.long 0x10 "REF_DIV,Ref Clock Divider Control" bitfld.long 0x10 31. "DE,Divider Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x10 16.--23. 1. "DIV,Divider Value" group.long 0x2B0++0xF line.long 0x0 "PUD_ST_CTRL,Power-Up Delay and Self-Test Control" hexmask.long.byte 0x0 16.--23. 1. "PUD,Power-Up Delay" newline bitfld.long 0x0 4.--5. "SELADCOUT,Debug ADC Output Selection" "0: ADC output,1: ADC output first half of conversion,2: ADC output second half of conversion,3: Internal register indicating reciprocal of ADC.." newline bitfld.long 0x0 0.--1. "MODE_SELFTEST,Self-Test Mode" "0: Normal temperature conversion mode,1: BJT Core BIST mode,2: ADC BIST mode,3: ADC BIST mode" line.long 0x4 "PUD_ST_CTRL_SET,Power-Up Delay and Self-Test Control" hexmask.long.byte 0x4 16.--23. 1. "PUD,Power-Up Delay" newline bitfld.long 0x4 4.--5. "SELADCOUT,Debug ADC Output Selection" "0,1,2,3" newline bitfld.long 0x4 0.--1. "MODE_SELFTEST,Self-Test Mode" "0,1,2,3" line.long 0x8 "PUD_ST_CTRL_CLR,Power-Up Delay and Self-Test Control" hexmask.long.byte 0x8 16.--23. 1. "PUD,Power-Up Delay" newline eventfld.long 0x8 4.--5. "SELADCOUT,Debug ADC Output Selection" "0,1,2,3" newline eventfld.long 0x8 0.--1. "MODE_SELFTEST,Self-Test Mode" "0,1,2,3" line.long 0xC "PUD_ST_CTRL_TOG,Power-Up Delay and Self-Test Control" hexmask.long.byte 0xC 16.--23. 1. "PUD,Power-Up Delay" newline bitfld.long 0xC 4.--5. "SELADCOUT,Debug ADC Output Selection" "0,1,2,3" newline bitfld.long 0xC 0.--1. "MODE_SELFTEST,Self-Test Mode" "0,1,2,3" rgroup.long 0x2C0++0xF line.long 0x0 "DBG_DATA,Debug Data" hexmask.long.word 0x0 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" line.long 0x4 "DBG_DATA_SET,Debug Data" hexmask.long.word 0x4 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" line.long 0x8 "DBG_DATA_CLR,Debug Data" hexmask.long.word 0x8 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" line.long 0xC "DBG_DATA_TOG,Debug Data" hexmask.long.word 0xC 0.--15. 1. "DBG_ADCOUT,ADC Debug Data" group.long 0x2E0++0x1F line.long 0x0 "TRIM1,Trim Control 1" hexmask.long.word 0x0 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0x0 0.--15. 1. "VAL_A,VAL_A" line.long 0x4 "TRIM1_SET,Trim Control 1" hexmask.long.word 0x4 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0x4 0.--15. 1. "VAL_A,VAL_A" line.long 0x8 "TRIM1_CLR,Trim Control 1" hexmask.long.word 0x8 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0x8 0.--15. 1. "VAL_A,VAL_A" line.long 0xC "TRIM1_TOG,Trim Control 1" hexmask.long.word 0xC 16.--31. 1. "VAL_B,VAL_B" newline hexmask.long.word 0xC 0.--15. 1. "VAL_A,VAL_A" line.long 0x10 "TRIM2,Trim Control 2" hexmask.long.word 0x10 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x10 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" line.long 0x14 "TRIM2_SET,Trim Control 2" hexmask.long.word 0x14 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x14 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" line.long 0x18 "TRIM2_CLR,Trim Control 2" hexmask.long.word 0x18 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x18 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" line.long 0x1C "TRIM2_TOG,Trim Control 2" hexmask.long.word 0x1C 16.--31. 1. "VAL_OFFSET,VAL_OFFSET" newline hexmask.long.word 0x1C 0.--15. 1. "VAL_ALPHA,VAL_ALPHA" tree.end tree "DISPLAY (Display Domain)" base ad:0x0 tree "DISPLAY_BLK_CTRL_DISPLAYMIX" base ad:0x4B010000 group.long 0x0++0x23 line.long 0x0 "Display_engines_clock_control,Display engines clock control" bitfld.long 0x0 2.--3. "DSIP_CLK1_SEL,Select the clock feeding the display engine 1" "0: CCM.video_pll_clk,1: DSI PLL Div clock,2: LVDS PLL Div/7 clock,?" newline bitfld.long 0x0 0.--1. "DSIP_CLK0_SEL,Select the clock feeding the display engine 0" "0: CCM.video_pll_clk,1: DSI PLL Div clock,2: LVDS PLL Div/7 clock,?" line.long 0x4 "Pixel_interleaver_control,Pixel interleaver control" bitfld.long 0x4 1. "Disp_in_sel,Select the input stream when mode is set in split mode #2" "0: Display input stream 0 is interleaved.,1: Display input stream 1 is interleaved." newline bitfld.long 0x4 0. "Mode,Select the pixel interleaver mode" "0: Pixel interleaver is in bypass mode.,1: Pixel interleaver is in split mode #2." line.long 0x8 "Pixel_link_ctrl,Pixel Link Control" bitfld.long 0x8 5. "PL1_valid,Indicates valid pixels / control" "0: Not valid pixels/control,1: Valid pixels/control" newline bitfld.long 0x8 4. "PL1_enable,Start Pixel Link1" "0: Do not start Pixel Link 1,1: Start Pixel Link 1" newline bitfld.long 0x8 1. "PL0_valid,Indicates valid pixels / control" "0: Not valid pixels/control,1: Valid pixels/control" newline bitfld.long 0x8 0. "PL0_enable,Start Pixel Link 0" "0: Do not start Pixel Link 0,1: Start Pixel Link 0" line.long 0xC "FrameGen_Synchronization,Frame Generator Synchronization" bitfld.long 0xC 12. "FramGen1_reset_n,Reset synchronization logic" "0: Reset FrameGen1.,1: Do not reset FrameGen1." newline bitfld.long 0xC 9.--11. "FrameGen1_CAM_VC_sel,Select which virtual channel is used for synchronization" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 8. "FrameGen1_Sync_en,Enable FrameGen1 synchronization feature" "0: Disable FrameGen1 synchronization feature.,1: Enable FrameGen1 synchronization feature." newline bitfld.long 0xC 4. "FramGen0_reset_n,Reset synchronization logic" "0: Reset FrameGen0.,1: Do not reset FrameGen0." newline bitfld.long 0xC 1.--3. "FrameGen0_CAM_VC_sel,Select which virtual channel is used for synchronization" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 0. "FrameGen0_Sync_en,Enable FrameGen0 synchronization feature" "0: Disable FrameGen0 synchronization feature.,1: Enable FrameGen0 synchronization feature." line.long 0x10 "FrameGen_Hsync,FrameGen Hsync Delay" hexmask.long.word 0x10 16.--25. 1. "Hsync1_delay,Number of DSP_CLK1 clock cycles to delay the input CSI#1 Hsync" newline hexmask.long.word 0x10 0.--9. 1. "Hsync0_delay,Number of DSP_CLK0 clock cycles to delay the input CSI#0 Hsync" line.long 0x14 "GP_timers_Control,GP Timers Control" bitfld.long 0x14 29.--31. "GPT_Timer3_CAM_VC_sel,Propagate Event GPT3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 27.--28. "GPT_Timer3_cap2_sel,Select camera stream event and virtual channel" "0: CSI#0 VSYNC,1: CSI#0 HSYNC,2: CSI#1 VSYNC,3: CSI#1 HSYNC" newline bitfld.long 0x14 25.--26. "GPT_Timer3_cap1_sel,Display stream event selection (to ipp_ind_capi1)" "0,1,2,3" newline bitfld.long 0x14 24. "GPT_Timer3_clk_sel,GP timer 3 clock selection" "0: DISP_CLK1,1: DISP_CLK0" newline bitfld.long 0x14 21.--23. "GPT_Timer2_CAM_VC_sel,Propagate Event" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 19.--20. "GPT_Timer2_cap2_sel,Camera stream event selection & Virtual channel selection" "0,1,2,3" newline bitfld.long 0x14 17.--18. "GPT_Timer2_cap1_sel,Select display stream event (to ipp_ind_capi1)" "0: DISP_OUT0_VSYNC,1: DISP_OUT0_HSYNC,2: DISP_OUT1_VSYNC,3: DISP_OUT1_VSYNC" newline bitfld.long 0x14 16. "GPT_Timer2_clk_sel,GP timer 2 clock selection" "0: DISP_CLK1,1: DISP_CLK0" newline bitfld.long 0x14 13.--15. "GPT_Timer1_CAM_VC_sel,Propagate Event" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 11.--12. "GPT_Timer1_cap2_sel,Camera stream event selection & Virtual channel selection" "0,1,2,3" newline bitfld.long 0x14 9.--10. "GPT_Timer1_cap1_sel,Select display stream event (to ipp_ind_capi1)" "0: DISP_OUT0_VSYNC,1: DISP_OUT0_HSYNC,2: DISP_OUT1_VSYNC,3: DISP_OUT1_VSYNC" newline bitfld.long 0x14 8. "GPT_Timer1_clk_sel,GP timer 1 clock selection" "0: DISP_CLK1,1: DISP_CLK0" newline bitfld.long 0x14 5.--7. "GPT_Timer0_CAM_VC_sel,Propagate Event" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 3.--4. "GPT_Timer0_cap2_sel,Camera stream event selection & Virtual channel selection" "0,1,2,3" newline bitfld.long 0x14 1.--2. "GPT_Timer0_cap1_sel,Display stream event selection (to ipp_ind_capi1)" "0,1,2,3" newline bitfld.long 0x14 0. "GPT_Timer0_clk_sel,GP timer 0 clock selection" "0: DISP_CLK1,1: DISP_CLK0" line.long 0x18 "AxCache_Control,AxCache control" hexmask.long.byte 0x18 20.--23. 1. "CmdSeq_AwCache,Set the AXI AWCache signal for the 32-bit AXI write master ports (command sequencer) of the Seeris IP" newline hexmask.long.byte 0x18 16.--19. 1. "CmdSeq_ArCache,Set the AXI ArCache signal for the 32-bit AXI read master ports (command sequencer) of the Seeris IP" newline hexmask.long.byte 0x18 8.--11. 1. "AwCache,Set the AXI AwCache signal for the AXI write master port (blitter output) of the Seeris IP except for the command sequencer one" newline hexmask.long.byte 0x18 0.--3. 1. "ArCache,Set the AXI ArCache signal for all AXI read master ports of the Seeris IP except for the command sequencer one" line.long 0x1C "QoS_Setting,QoS setting" bitfld.long 0x1C 16.--18. "CmdSeq_QoS,Set the AXI AxQoS signal for the AXI read and write master port of the command sequencer" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 8.--10. "Blitter_AxQoS,Set the AXI AxQoS signal for the AXI read and write master port of the blitter fetch units." "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 4.--6. "Display_Panic_QoS,Set the AXI Hurry QoS signal for all AXI NIU connected to display controller fetch units when the display FIFO panic signal is active." "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 0.--2. "Display_ArQoS,Set the AXI ArQoS signal for all AXI read master ports of the Display controller part of the Seeris IP" "0,1,2,3,4,5,6,7" line.long 0x20 "DisplayEngine_Plane_Association,Display Engine Plane Association" bitfld.long 0x20 12. "VideoPlane_2,FetchYUV#2 + FetchEco#2" "0: Fetch unit is associated with Display Engine 0.,1: Fetch unit is associated with Display Engine 1." newline bitfld.long 0x20 10. "VideoPlane_1,FetchYUV#1 + FetchEco#1" "0: Fetch unit is associated with Display Engine 0.,1: Fetch unit is associated with Display Engine 1." newline bitfld.long 0x20 8. "VideoPlane_0,FetchYUV#0 + FetchEco#0" "0: Fetch unit is associated with Display Engine 0.,1: Fetch unit is associated with Display Engine 1." newline bitfld.long 0x20 6. "IntPlane_0,FetchYUV#4" "0: Fetch unit is associated with Display Engine 0.,1: Fetch unit is associated with Display Engine 1." newline bitfld.long 0x20 2. "FracPlane_1,FetchLayer#1" "0: Fetch unit is associated with Display Engine 0.,1: Fetch unit is associated with Display Engine 1." newline bitfld.long 0x20 0. "FracPlane_0,FetchLayer#0" "0: Fetch unit is associated with Display Engine 0.,1: Fetch unit is associated with Display Engine 1." tree.end tree "DISPLAY_BLK_CTRL_LVDS" base ad:0x4B0C0000 group.long 0x0++0xF line.long 0x0 "LVDS_PHY_CLOCK_CONTROL,LVDS PHY Clock Control" bitfld.long 0x0 5. "LVDS_PLL_clock_ctrl,Control the clock gating logic of the LVDS PLL input clock" "0: LVDS PLL input clock are not clocked,1: LVDS PLL input clock are clocked" newline bitfld.long 0x0 4. "PixelMapper_Di1_clock_Ctrl,LVDS pixel mapper Di1 clock gate control" "0: LVDS pixel mapper Di1 are clocked,1: LVDS pixel mapper Di1 are not clocked" newline bitfld.long 0x0 3. "PixelMapper_Di0_clock_Ctrl,LVDS pixel mapper Di0 clock gate control" "0: LVDS pixel mapper Di0 are clocked,1: LVDS pixel mapper Di0 are not clocked" newline bitfld.long 0x0 2. "Serializer_Ch1_clock_Ctrl,LVDS serializer channel 1 clock gate control" "0: LVDS serializer channel 1 are clocked,1: LVDS serializer channel 1 are not clocked" newline bitfld.long 0x0 1. "Serializer_Ch0_clock_Ctrl,LVDS serializer channel 0 clock gate control" "0: LVDS serializer channel 0 are clocked,1: LVDS serializer channel 0 are not clocked" newline bitfld.long 0x0 0. "LVDS_PHY_DIV,Defines the PHY clock divider ratio" "0: PHY clock frequency is equal to PLL clock..,1: PHY clock frequency is equal to PLL clock.." line.long 0x4 "PIXEL_MAPPER_CONTROL,Pixel mapper control" bitfld.long 0x4 25.--27. "ASYNC_FIFO_THRESHOLD,Reset value for the LDB counter which determines when the shift registers are loaded with data." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 24. "ASYNC_FIFO_ENABLE,Channel 0 and channel 1 a sync FIFO enable" "0: Disable,1: Enable async FIFO to buffer RGB data" newline bitfld.long 0x4 15. "BGREF_RRMODE,Select reference resistor for bandgap" "0: External resistor of 29kOhm is selected,1: Internal resistor is selected" newline bitfld.long 0x4 12. "CH1_ASYNC_FIFO_RESET,LVDS channel 1 async FIFO software reset" "0: No action,1: Software reset" newline bitfld.long 0x4 11. "CH0_ASYNC_FIFO_RESET,LVDS channel 0 async FIFO software reset" "0: No action,1: Software reset" newline bitfld.long 0x4 10. "DI1_VSYNC_POLARITY,VSYNC polarity select for DI1" "0: VSYNC is active high,1: VSYNC is active low" newline bitfld.long 0x4 9. "DI0_VSYNC_POLARITY,VSYNC polarity select for DI0" "0: VSYNC is active high,1: VSYNC is active low" newline bitfld.long 0x4 8. "CH1_BIT_MAPPING,Data mapping for LVDS channel 1" "0: Use SPWG standard,1: Use JEIDA standard" newline bitfld.long 0x4 7. "CH1_DATA_WIDTH,Data width for LVDS channel 1" "0: Data width is 18 bits wide,1: Data width is 24 bits wide" newline bitfld.long 0x4 6. "CH0_BIT_MAPPING,Data mapping for LVDS channel 0" "0: Use SPWG standard,1: Use JEIDA standard" newline bitfld.long 0x4 5. "CH0_DATA_WIDTH,Data width for LVDS channel 0" "0: Data width is 18 bits wide,1: Data width is 24 bits wide" newline bitfld.long 0x4 4. "SPLIT_MODE,Enable split mode" "0: Split mode is disabled.,1: Split mode is enabled. In this mode both.." newline bitfld.long 0x4 3. "CH1_DI_SELECT,LVDS channel 1 source select" "0: From DI0,1: From DI1" newline bitfld.long 0x4 2. "CH1_ENABLE,LVDS channel 1 enable" "0: Normal mode,1: Channel enabled" newline bitfld.long 0x4 1. "CH0_DI_SELECT,LVDS channel 0 source select" "0: From DI0,1: From DI1" newline bitfld.long 0x4 0. "CH0_ENABLE,LVDS channel 0 enable" "0: Normal mode,1: Channel enabled" line.long 0x8 "LVDS0_CONTROL,LVDS0 control" bitfld.long 0x8 25.--27. "SPARE_IN,Spare ports" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 24. "TEST_RANDOM_NUM_EN,Random number generator enable" "0: Disable,1: Enable" newline bitfld.long 0x8 22.--23. "TEST_MUX_SRC,Select which signals to test" "0: test_do[0],1: test_do[1],2: test_do[2],3: test_do[3]" newline bitfld.long 0x8 21. "TEST_EN,Test enable" "0: Disable,1: Enable" newline bitfld.long 0x8 20. "TEST_DIV4,Divide the input signal/clock by 4." "0: Disable,1: Enable" newline bitfld.long 0x8 17.--19. "VBG_ADJ,Bandgap adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 14.--16. "SLEW_ADJ,Output transition time adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 11.--13. "CC_ADJ,Output current adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "CM_ADJ,Output common mode (Vos) adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 5.--7. "PRE_EMPH_ADJ,Pre-emphasis adjustment." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4. "PRE_EMPH_EN,Enable pre-emphasis" "0: Disable,1: Enable" newline bitfld.long 0x8 3. "HS_EN,Enable 100 ohm termination in the chip enable which also doubles power dissipation." "0: Disable,1: Enable" newline bitfld.long 0x8 2. "BG_EN,Channel 0 enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "LVDS_EN,LVDS PHY enable" "0: Enable. LVDS function is normal.,1: Disable" newline bitfld.long 0x8 0. "CH0_EN,Channel 0 enable" "0: Disable,1: Enable" line.long 0xC "LVDS1_CONTROL,LVDS1 Control" bitfld.long 0xC 25.--27. "SPARE_IN,Spare ports" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 24. "TEST_RANDOM_NUM_EN,Random number generator enable" "0: Disable,1: Enable" newline bitfld.long 0xC 22.--23. "TEST_MUX_SRC,Select which signals to test" "0: test_do[0],1: test_do[1],2: test_do[2],3: test_do[3]" newline bitfld.long 0xC 21. "TEST_EN,Test enable" "0: Disable,1: Enable" newline bitfld.long 0xC 20. "TEST_DIV4,Divide the input signal/clock by 4." "0: Disable,1: Enable" newline bitfld.long 0xC 17.--19. "VBG_ADJ,Bandgap adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 14.--16. "SLEW_ADJ,Output transition time adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 11.--13. "CC_ADJ,Output current adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 8.--10. "CM_ADJ,Output common mode (Vos) adjustment" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 5.--7. "PRE_EMPH_ADJ,Pre-emphasis adjustment." "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 4. "PRE_EMPH_EN,Enable pre-emphasis" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "HS_EN,Enable 100 ohm termination in the chip enable which also doubles power dissipation." "0: Disable,1: Enable" newline bitfld.long 0xC 2. "BG_EN,Channel 0 enable" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "LVDS_EN,LVDS PHY enable" "0: Enable. LVDS function is normal.,1: Disable" newline bitfld.long 0xC 0. "CH0_EN,Channel 0 enable" "0: Disable,1: Enable" tree.end tree "DISPLAY_FRACT_PLL" base ad:0x44481800 group.long 0x0++0x6F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0: Normal mode,1: MULTIPHASE_SDM_DISABLE_MODE" newline bitfld.long 0x0 11. "DITHER_EN3,Dither Enable 3" "0: Normal mode,1: Dither enable for third stage of fractional.." newline bitfld.long 0x0 10. "DITHER_EN2,Dither Enable 2" "0: Normal mode,1: Dither enable for second stage of fractional.." newline bitfld.long 0x0 9. "DITHER_EN1,Dither Enable 1" "0: Normal mode,1: Dither enable for first stage of fractional.." newline bitfld.long 0x0 8. "SPREADCTL,Modulation type selection" "0: Modulation centered around nominal frequency.,1: Modulation spread below nominal frequency." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0x4 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0x4 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0x4 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0x4 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline eventfld.long 0x8 11. "DITHER_EN3,Dither Enable 3" "0,1" newline eventfld.long 0x8 10. "DITHER_EN2,Dither Enable 2" "0,1" newline eventfld.long 0x8 9. "DITHER_EN1,Dither Enable 1" "0,1" newline eventfld.long 0x8 8. "SPREADCTL,Modulation type selection" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0xC 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0xC 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0xC 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0xC 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x30 "SPREAD_SPECTRUM,PLL Spread Spectrum Register" hexmask.long.word 0x30 16.--31. 1. "STOP,Stop" newline bitfld.long 0x30 15. "ENABLE,ENABLE" "0: Disable spread spectrum modulation.,1: Enable spread spectrum modulation." newline hexmask.long.word 0x30 0.--14. 1. "STEP,STEP" line.long 0x34 "SPREAD_SPECTRUM_SET,PLL Spread Spectrum Register" hexmask.long.word 0x34 16.--31. 1. "STOP,Stop" newline bitfld.long 0x34 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "STEP,STEP" line.long 0x38 "SPREAD_SPECTRUM_CLR,PLL Spread Spectrum Register" hexmask.long.word 0x38 16.--31. 1. "STOP,Stop" newline eventfld.long 0x38 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x38 0.--14. 1. "STEP,STEP" line.long 0x3C "SPREAD_SPECTRUM_TOG,PLL Spread Spectrum Register" hexmask.long.word 0x3C 16.--31. 1. "STOP,Stop" newline bitfld.long 0x3C 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x3C 0.--14. 1. "STEP,STEP" line.long 0x40 "NUMERATOR,PLL Numerator Register" hexmask.long 0x40 2.--31. 1. "MFN,Numerator" line.long 0x44 "NUMERATOR_SET,PLL Numerator Register" hexmask.long 0x44 2.--31. 1. "MFN,Numerator" line.long 0x48 "NUMERATOR_CLR,PLL Numerator Register" hexmask.long 0x48 2.--31. 1. "MFN,Numerator" line.long 0x4C "NUMERATOR_TOG,PLL Numerator Register" hexmask.long 0x4C 2.--31. 1. "MFN,Numerator" line.long 0x50 "DENOMINATOR,PLL Denominator Register" hexmask.long 0x50 0.--29. 1. "MFD,Denominator" line.long 0x54 "DENOMINATOR_SET,PLL Denominator Register" hexmask.long 0x54 0.--29. 1. "MFD,Denominator" line.long 0x58 "DENOMINATOR_CLR,PLL Denominator Register" hexmask.long 0x58 0.--29. 1. "MFD,Denominator" line.long 0x5C "DENOMINATOR_TOG,PLL Denominator Register" hexmask.long 0x5C 0.--29. 1. "MFD,Denominator" line.long 0x60 "DIV,PLL Dividers Register" hexmask.long.word 0x60 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x60 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x60 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x64 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x64 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x64 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x64 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x68 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x68 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x68 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x68 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x6C "DIV_TOG,PLL Dividers Register" hexmask.long.word 0x6C 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x6C 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x6C 0.--7. 1. "ODIV,Output frequency divider for clock output" rgroup.long 0xF0++0x3 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" tree.end tree "DISPLAY_GPT" tree "GPT0" base ad:0x4B070000 group.long 0x0++0xF line.long 0x0 "CR,GPT Control Register" bitfld.long 0x0 31. "FO3,Force Output Compare for Channel 3" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 30. "FO2,Force Output Compare for Channel 2" "0: No effect,1: Trigger the programmed response on the output.." newline bitfld.long 0x0 29. "FO1,Force Output Compare for Channel 1" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 26.--28. "OM3,Output Compare Operating Mode for Channel 3" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 23.--25. "OM2,Output Compare Operating Mode for Channel 2" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." bitfld.long 0x0 20.--22. "OM1,Output Compare Operating Mode for Channel 1" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 18.--19. "IM2,Input Capture Operating Mode for Channel 2" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" bitfld.long 0x0 16.--17. "IM1,Input Capture Operating Mode for Channel 1" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" newline bitfld.long 0x0 15. "SWR,Software Reset" "0: GPT is not in software reset state,1: GPT is in software reset state" bitfld.long 0x0 10. "EN_24M,Enable Oscillator Clock Input" "0: Disable,1: Enable" newline bitfld.long 0x0 9. "FRR,Free-Run or Restart Mode" "0: Restart mode. After a compare event the counter..,1: Free-Run mode. After a compare event the counter.." bitfld.long 0x0 6.--8. "CLKSRC,Clock Source Select" "0: No clock,1: Peripheral Clock (ipg_clk),2: High Frequency Reference Clock (ipg_clk_highfreq),3: External Clock,4: Low Frequency Reference Clock (ipg_clk_32k),5: Oscillator as Reference Clock (ipg_clk_24M),?,?" newline bitfld.long 0x0 5. "STOPEN,GPT Stop Mode Enable" "0: Disable in Stop mode,1: Enable in Stop mode" bitfld.long 0x0 4. "DOZEEN,GPT Doze Mode Enable" "0: Disable in Doze mode,1: Enable in Doze mode" newline bitfld.long 0x0 3. "WAITEN,GPT Wait Mode Enable" "0: Disable in Wait mode,1: Enable in Wait mode" bitfld.long 0x0 2. "DBGEN,GPT Debug Mode Enable" "0: Disable in Debug mode,1: Enable in Debug mode" newline bitfld.long 0x0 1. "ENMOD,GPT Enable Mode" "0: Restart counting from their frozen values after..,1: Reset counting from 0 after GPT is enabled (EN=1)." bitfld.long 0x0 0. "EN,GPT Enable" "0: Disable,1: Enable" line.long 0x4 "PR,GPT Prescaler Register" hexmask.long.byte 0x4 12.--15. 1. "PRESCALER24M,Prescaler divide value for the oscillator clock" hexmask.long.word 0x4 0.--11. 1. "PRESCALER,Prescaler divide value" line.long 0x8 "SR,GPT Status Register" eventfld.long 0x8 5. "ROV,Rollover Flag" "0: Rollover has not occurred.,1: Rollover has occurred." eventfld.long 0x8 4. "IF2,Input Capture Flag for Channel 2" "0: Capture event has not occurred.,1: Capture event has occurred." newline eventfld.long 0x8 3. "IF1,Input Capture Flag for Channel 1" "0: Capture event has not occurred.,1: Capture event has occurred." eventfld.long 0x8 2. "OF3,Output Compare Flag for Channel 3" "0: Compare event has not occurred.,1: Compare event has occurred." newline eventfld.long 0x8 1. "OF2,Output Compare Flag for Channel 2" "0: Compare event has not occurred.,1: Compare event has occurred." eventfld.long 0x8 0. "OF1,Output Compare Flag for Channel 1" "0: Compare event has not occurred.,1: Compare event has occurred." line.long 0xC "IR,GPT Interrupt Register" bitfld.long 0xC 5. "ROVIE,Rollover Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 4. "IF2IE,Input Capture Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "IF1IE,Input Capture Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 2. "OF3IE,Output Compare Flag for Channel 3 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "OF2IE,Output Compare Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 0. "OF1IE,Output Compare Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "OCR$1,GPT Output Compare Register" hexmask.long 0x0 0.--31. 1. "COMP,Compare Value" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x1C)++0x3 line.long 0x0 "ICR$1,GPT Input Capture Register" hexmask.long 0x0 0.--31. 1. "CAPT,Capture Value" repeat.end rgroup.long 0x24++0x3 line.long 0x0 "CNT,GPT Counter Register" hexmask.long 0x0 0.--31. 1. "COUNT,Counter Value" tree.end tree "GPT1" base ad:0x4B080000 group.long 0x0++0xF line.long 0x0 "CR,GPT Control Register" bitfld.long 0x0 31. "FO3,Force Output Compare for Channel 3" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 30. "FO2,Force Output Compare for Channel 2" "0: No effect,1: Trigger the programmed response on the output.." newline bitfld.long 0x0 29. "FO1,Force Output Compare for Channel 1" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 26.--28. "OM3,Output Compare Operating Mode for Channel 3" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 23.--25. "OM2,Output Compare Operating Mode for Channel 2" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." bitfld.long 0x0 20.--22. "OM1,Output Compare Operating Mode for Channel 1" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 18.--19. "IM2,Input Capture Operating Mode for Channel 2" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" bitfld.long 0x0 16.--17. "IM1,Input Capture Operating Mode for Channel 1" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" newline bitfld.long 0x0 15. "SWR,Software Reset" "0: GPT is not in software reset state,1: GPT is in software reset state" bitfld.long 0x0 10. "EN_24M,Enable Oscillator Clock Input" "0: Disable,1: Enable" newline bitfld.long 0x0 9. "FRR,Free-Run or Restart Mode" "0: Restart mode. After a compare event the counter..,1: Free-Run mode. After a compare event the counter.." bitfld.long 0x0 6.--8. "CLKSRC,Clock Source Select" "0: No clock,1: Peripheral Clock (ipg_clk),2: High Frequency Reference Clock (ipg_clk_highfreq),3: External Clock,4: Low Frequency Reference Clock (ipg_clk_32k),5: Oscillator as Reference Clock (ipg_clk_24M),?,?" newline bitfld.long 0x0 5. "STOPEN,GPT Stop Mode Enable" "0: Disable in Stop mode,1: Enable in Stop mode" bitfld.long 0x0 4. "DOZEEN,GPT Doze Mode Enable" "0: Disable in Doze mode,1: Enable in Doze mode" newline bitfld.long 0x0 3. "WAITEN,GPT Wait Mode Enable" "0: Disable in Wait mode,1: Enable in Wait mode" bitfld.long 0x0 2. "DBGEN,GPT Debug Mode Enable" "0: Disable in Debug mode,1: Enable in Debug mode" newline bitfld.long 0x0 1. "ENMOD,GPT Enable Mode" "0: Restart counting from their frozen values after..,1: Reset counting from 0 after GPT is enabled (EN=1)." bitfld.long 0x0 0. "EN,GPT Enable" "0: Disable,1: Enable" line.long 0x4 "PR,GPT Prescaler Register" hexmask.long.byte 0x4 12.--15. 1. "PRESCALER24M,Prescaler divide value for the oscillator clock" hexmask.long.word 0x4 0.--11. 1. "PRESCALER,Prescaler divide value" line.long 0x8 "SR,GPT Status Register" eventfld.long 0x8 5. "ROV,Rollover Flag" "0: Rollover has not occurred.,1: Rollover has occurred." eventfld.long 0x8 4. "IF2,Input Capture Flag for Channel 2" "0: Capture event has not occurred.,1: Capture event has occurred." newline eventfld.long 0x8 3. "IF1,Input Capture Flag for Channel 1" "0: Capture event has not occurred.,1: Capture event has occurred." eventfld.long 0x8 2. "OF3,Output Compare Flag for Channel 3" "0: Compare event has not occurred.,1: Compare event has occurred." newline eventfld.long 0x8 1. "OF2,Output Compare Flag for Channel 2" "0: Compare event has not occurred.,1: Compare event has occurred." eventfld.long 0x8 0. "OF1,Output Compare Flag for Channel 1" "0: Compare event has not occurred.,1: Compare event has occurred." line.long 0xC "IR,GPT Interrupt Register" bitfld.long 0xC 5. "ROVIE,Rollover Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 4. "IF2IE,Input Capture Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "IF1IE,Input Capture Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 2. "OF3IE,Output Compare Flag for Channel 3 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "OF2IE,Output Compare Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 0. "OF1IE,Output Compare Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "OCR$1,GPT Output Compare Register" hexmask.long 0x0 0.--31. 1. "COMP,Compare Value" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x1C)++0x3 line.long 0x0 "ICR$1,GPT Input Capture Register" hexmask.long 0x0 0.--31. 1. "CAPT,Capture Value" repeat.end rgroup.long 0x24++0x3 line.long 0x0 "CNT,GPT Counter Register" hexmask.long 0x0 0.--31. 1. "COUNT,Counter Value" tree.end tree "GPT2" base ad:0x4B090000 group.long 0x0++0xF line.long 0x0 "CR,GPT Control Register" bitfld.long 0x0 31. "FO3,Force Output Compare for Channel 3" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 30. "FO2,Force Output Compare for Channel 2" "0: No effect,1: Trigger the programmed response on the output.." newline bitfld.long 0x0 29. "FO1,Force Output Compare for Channel 1" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 26.--28. "OM3,Output Compare Operating Mode for Channel 3" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 23.--25. "OM2,Output Compare Operating Mode for Channel 2" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." bitfld.long 0x0 20.--22. "OM1,Output Compare Operating Mode for Channel 1" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 18.--19. "IM2,Input Capture Operating Mode for Channel 2" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" bitfld.long 0x0 16.--17. "IM1,Input Capture Operating Mode for Channel 1" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" newline bitfld.long 0x0 15. "SWR,Software Reset" "0: GPT is not in software reset state,1: GPT is in software reset state" bitfld.long 0x0 10. "EN_24M,Enable Oscillator Clock Input" "0: Disable,1: Enable" newline bitfld.long 0x0 9. "FRR,Free-Run or Restart Mode" "0: Restart mode. After a compare event the counter..,1: Free-Run mode. After a compare event the counter.." bitfld.long 0x0 6.--8. "CLKSRC,Clock Source Select" "0: No clock,1: Peripheral Clock (ipg_clk),2: High Frequency Reference Clock (ipg_clk_highfreq),3: External Clock,4: Low Frequency Reference Clock (ipg_clk_32k),5: Oscillator as Reference Clock (ipg_clk_24M),?,?" newline bitfld.long 0x0 5. "STOPEN,GPT Stop Mode Enable" "0: Disable in Stop mode,1: Enable in Stop mode" bitfld.long 0x0 4. "DOZEEN,GPT Doze Mode Enable" "0: Disable in Doze mode,1: Enable in Doze mode" newline bitfld.long 0x0 3. "WAITEN,GPT Wait Mode Enable" "0: Disable in Wait mode,1: Enable in Wait mode" bitfld.long 0x0 2. "DBGEN,GPT Debug Mode Enable" "0: Disable in Debug mode,1: Enable in Debug mode" newline bitfld.long 0x0 1. "ENMOD,GPT Enable Mode" "0: Restart counting from their frozen values after..,1: Reset counting from 0 after GPT is enabled (EN=1)." bitfld.long 0x0 0. "EN,GPT Enable" "0: Disable,1: Enable" line.long 0x4 "PR,GPT Prescaler Register" hexmask.long.byte 0x4 12.--15. 1. "PRESCALER24M,Prescaler divide value for the oscillator clock" hexmask.long.word 0x4 0.--11. 1. "PRESCALER,Prescaler divide value" line.long 0x8 "SR,GPT Status Register" eventfld.long 0x8 5. "ROV,Rollover Flag" "0: Rollover has not occurred.,1: Rollover has occurred." eventfld.long 0x8 4. "IF2,Input Capture Flag for Channel 2" "0: Capture event has not occurred.,1: Capture event has occurred." newline eventfld.long 0x8 3. "IF1,Input Capture Flag for Channel 1" "0: Capture event has not occurred.,1: Capture event has occurred." eventfld.long 0x8 2. "OF3,Output Compare Flag for Channel 3" "0: Compare event has not occurred.,1: Compare event has occurred." newline eventfld.long 0x8 1. "OF2,Output Compare Flag for Channel 2" "0: Compare event has not occurred.,1: Compare event has occurred." eventfld.long 0x8 0. "OF1,Output Compare Flag for Channel 1" "0: Compare event has not occurred.,1: Compare event has occurred." line.long 0xC "IR,GPT Interrupt Register" bitfld.long 0xC 5. "ROVIE,Rollover Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 4. "IF2IE,Input Capture Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "IF1IE,Input Capture Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 2. "OF3IE,Output Compare Flag for Channel 3 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "OF2IE,Output Compare Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 0. "OF1IE,Output Compare Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "OCR$1,GPT Output Compare Register" hexmask.long 0x0 0.--31. 1. "COMP,Compare Value" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x1C)++0x3 line.long 0x0 "ICR$1,GPT Input Capture Register" hexmask.long 0x0 0.--31. 1. "CAPT,Capture Value" repeat.end rgroup.long 0x24++0x3 line.long 0x0 "CNT,GPT Counter Register" hexmask.long 0x0 0.--31. 1. "COUNT,Counter Value" tree.end tree "GPT3" base ad:0x4B0A0000 group.long 0x0++0xF line.long 0x0 "CR,GPT Control Register" bitfld.long 0x0 31. "FO3,Force Output Compare for Channel 3" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 30. "FO2,Force Output Compare for Channel 2" "0: No effect,1: Trigger the programmed response on the output.." newline bitfld.long 0x0 29. "FO1,Force Output Compare for Channel 1" "0: No effect,1: Trigger the programmed response on the output.." bitfld.long 0x0 26.--28. "OM3,Output Compare Operating Mode for Channel 3" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 23.--25. "OM2,Output Compare Operating Mode for Channel 2" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." bitfld.long 0x0 20.--22. "OM1,Output Compare Operating Mode for Channel 1" "0: Generate a low pulse that is one input clock..,1: Toggle output,2: Clear output,3: Set output,4: Generate a low pulse that is one input clock..,5: Generate a low pulse that is one input clock..,6: Generate a low pulse that is one input clock..,7: Generate a low pulse that is one input clock.." newline bitfld.long 0x0 18.--19. "IM2,Input Capture Operating Mode for Channel 2" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" bitfld.long 0x0 16.--17. "IM1,Input Capture Operating Mode for Channel 1" "0: Capture disabled,1: Capture on rising edge only,2: Capture on falling edge only,3: Capture on both edges" newline bitfld.long 0x0 15. "SWR,Software Reset" "0: GPT is not in software reset state,1: GPT is in software reset state" bitfld.long 0x0 10. "EN_24M,Enable Oscillator Clock Input" "0: Disable,1: Enable" newline bitfld.long 0x0 9. "FRR,Free-Run or Restart Mode" "0: Restart mode. After a compare event the counter..,1: Free-Run mode. After a compare event the counter.." bitfld.long 0x0 6.--8. "CLKSRC,Clock Source Select" "0: No clock,1: Peripheral Clock (ipg_clk),2: High Frequency Reference Clock (ipg_clk_highfreq),3: External Clock,4: Low Frequency Reference Clock (ipg_clk_32k),5: Oscillator as Reference Clock (ipg_clk_24M),?,?" newline bitfld.long 0x0 5. "STOPEN,GPT Stop Mode Enable" "0: Disable in Stop mode,1: Enable in Stop mode" bitfld.long 0x0 4. "DOZEEN,GPT Doze Mode Enable" "0: Disable in Doze mode,1: Enable in Doze mode" newline bitfld.long 0x0 3. "WAITEN,GPT Wait Mode Enable" "0: Disable in Wait mode,1: Enable in Wait mode" bitfld.long 0x0 2. "DBGEN,GPT Debug Mode Enable" "0: Disable in Debug mode,1: Enable in Debug mode" newline bitfld.long 0x0 1. "ENMOD,GPT Enable Mode" "0: Restart counting from their frozen values after..,1: Reset counting from 0 after GPT is enabled (EN=1)." bitfld.long 0x0 0. "EN,GPT Enable" "0: Disable,1: Enable" line.long 0x4 "PR,GPT Prescaler Register" hexmask.long.byte 0x4 12.--15. 1. "PRESCALER24M,Prescaler divide value for the oscillator clock" hexmask.long.word 0x4 0.--11. 1. "PRESCALER,Prescaler divide value" line.long 0x8 "SR,GPT Status Register" eventfld.long 0x8 5. "ROV,Rollover Flag" "0: Rollover has not occurred.,1: Rollover has occurred." eventfld.long 0x8 4. "IF2,Input Capture Flag for Channel 2" "0: Capture event has not occurred.,1: Capture event has occurred." newline eventfld.long 0x8 3. "IF1,Input Capture Flag for Channel 1" "0: Capture event has not occurred.,1: Capture event has occurred." eventfld.long 0x8 2. "OF3,Output Compare Flag for Channel 3" "0: Compare event has not occurred.,1: Compare event has occurred." newline eventfld.long 0x8 1. "OF2,Output Compare Flag for Channel 2" "0: Compare event has not occurred.,1: Compare event has occurred." eventfld.long 0x8 0. "OF1,Output Compare Flag for Channel 1" "0: Compare event has not occurred.,1: Compare event has occurred." line.long 0xC "IR,GPT Interrupt Register" bitfld.long 0xC 5. "ROVIE,Rollover Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 4. "IF2IE,Input Capture Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "IF1IE,Input Capture Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 2. "OF3IE,Output Compare Flag for Channel 3 Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "OF2IE,Output Compare Flag for Channel 2 Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0xC 0. "OF1IE,Output Compare Flag for Channel 1 Interrupt Enable" "0: Disable,1: Enable" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "OCR$1,GPT Output Compare Register" hexmask.long 0x0 0.--31. 1. "COMP,Compare Value" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x1C)++0x3 line.long 0x0 "ICR$1,GPT Input Capture Register" hexmask.long 0x0 0.--31. 1. "CAPT,Capture Value" repeat.end rgroup.long 0x24++0x3 line.long 0x0 "CNT,GPT Counter Register" hexmask.long 0x0 0.--31. 1. "COUNT,Counter Value" tree.end tree.end tree "DISPLAY_IRQSTEER" base ad:0x4B0B0000 repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x4)++0x3 line.long 0x0 "CHn_MASK[$1],Channel n Interrupt Mask Register" hexmask.long 0x0 0.--31. 1. "MASKFLD,Mask bits" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x44)++0x3 line.long 0x0 "CHn_SET[$1],Channel n Interrupt Set Register" hexmask.long 0x0 0.--31. 1. "FORCEFLD,Force interrupt." repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x84)++0x3 line.long 0x0 "CHn_STATUS[$1],Channel n Interrupt Status Register" hexmask.long 0x0 0.--31. 1. "STATUS,Status of an interrupt" repeat.end group.long 0xC4++0x3 line.long 0x0 "CHn_MINTDIS,Channel n Master Interrupt Disable Register" hexmask.long.byte 0x0 0.--7. 1. "DISABLE,Each bit of this field disables the corresponding interrupts in table above." rgroup.long 0xC8++0x3 line.long 0x0 "CHn_MSTRSTAT,Channel n Master Status Register" bitfld.long 0x0 0. "STATUS,Status of all interrupts" "0: No interrupts are asserted.,1: At least one interrupt is asserted." tree.end tree "DISPLAY_OCRAM_MECC" base ad:0x4B0F0000 group.long 0x0++0xF line.long 0x0 "RAMCR,RAM Control" bitfld.long 0x0 8. "INIT_SYSA,Initialize With System Address" "0: Local,1: System" bitfld.long 0x0 1.--2. "IWS,Initialization Wait States" "0: Zero,1: One,2: Two,3: Three" newline bitfld.long 0x0 0. "INIT,Initialization Request" "0: Not requested,1: Requested" line.long 0x4 "RAMIAS,RAM Initialization Address Start" hexmask.long 0x4 0.--31. 1. "IAS,Initialization Address Start" line.long 0x8 "RAMIAE,RAM Initialization Address End" hexmask.long 0x8 0.--31. 1. "IAE,Initialization Address End" line.long 0xC "RAMSR,RAM Status" hexmask.long.byte 0xC 16.--23. 1. "EINFO,Event Information" hexmask.long.byte 0xC 8.--15. 1. "SYND,ECC Syndrome Value" newline eventfld.long 0xC 7. "SGLERR,ECC Single-Bit Error" "0: No error occurred,1: An error occurred" eventfld.long 0xC 6. "MLTERR,ECC Multi-Bit Error" "0: No error occurred,1: An error occurred" newline eventfld.long 0xC 5. "AERR,ECC Address Error" "0: No error occurred,1: An error occurred" eventfld.long 0xC 3. "AVALID,Addresses Valid" "0: Addresses do not correspond to an event,1: Addresses correspond to an event" newline rbitfld.long 0xC 2. "IPEND,Initialization Pending" "0: Not in progress,1: In progress" eventfld.long 0xC 1. "BUSERR,Bus Error" "0: No error occurred since the last time this field..,1: An error occurred" newline eventfld.long 0xC 0. "IDONE,Initialization Done" "0: An initialization was not requested is in..,1: An initialization completed successfully" rgroup.long 0x10++0x3 line.long 0x0 "RAMMEMA,RAM ECC Address" hexmask.long.byte 0x0 20.--24. 1. "BANK,RAM Bank ID" hexmask.long.tbyte 0x0 0.--16. 1. "MEMA,RAM Bank Address" rgroup.long 0x18++0x3 line.long 0x0 "RAMSYSA,RAM System Address" hexmask.long 0x0 0.--31. 1. "SYSA,System Address" group.long 0x1C++0xF line.long 0x0 "RAMECCNT,RAM Correctable Error Count" hexmask.long.byte 0x0 0.--7. 1. "ECCNT,ECC Correctable Error Count" line.long 0x4 "RAMEID0,RAM Error Injection Data 0" hexmask.long 0x4 0.--31. 1. "EID_W0,Error Injection Data Word 0" line.long 0x8 "RAMEID1,RAM Error Injection Data 1" hexmask.long 0x8 0.--31. 1. "EID_W1,Error Injection Data Word 1" line.long 0xC "RAMEIDC,RAM Error Injection Data Control" bitfld.long 0xC 31. "EID_EN,Error Injection Data Enable" "0: No injection,1: Local injection" bitfld.long 0xC 30. "EIA_EN,Error Injection Address Enable" "0: Ignore RAMEIA and RAMEIAM,1: Enable RAMEIA and RAMEIAM" newline bitfld.long 0xC 24. "EIP_EN,Error Injection Into Pipeline Enable" "0: No error injected,1: Error injected" hexmask.long.byte 0xC 0.--7. 1. "EID_CKB,Error Injection Data Checkbits" group.long 0x30++0x7 line.long 0x0 "RAMEIA,RAM Error Injection Base Address" hexmask.long 0x0 0.--31. 1. "EIA,Error Injection Base Address" line.long 0x4 "RAMEIAM,RAM Error Injection Address Mask" hexmask.long 0x4 0.--31. 1. "EIAM,Error Injection Address Mask" group.long 0x40++0x3 line.long 0x0 "RAMMAXA,RAM Maximum-Value Address" hexmask.long 0x0 0.--31. 1. "MAXA,Maximum Address" group.long 0x80++0x3 line.long 0x0 "RAMCR2,RAM Control 2" bitfld.long 0x0 1.--2. "WBUF,Write Buffer Control" "0: Disable write buffer for all write transactions,1: Enable write buffer for write transactions that..,2: Enable write buffer for write transactions that..,?" tree.end tree "DISPLAY_PIXEL_INTERLEAVER" base ad:0x4B0D0000 repeat 2. (list 0x0 0x1)(list ad:0x4B0D0000 ad:0x4B0E0000) tree "DISPLAY[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "CTRL,DISP_INn Control Register" bitfld.long 0x0 13. "YUV_CONV,YUV444 to YUV422 conversion enable" "0: Disable,1: Enable" bitfld.long 0x0 12. "PIXEL_FORMAT,Pixel format" "0: RGB format,1: YUV format" bitfld.long 0x0 11. "DE_POLARITY,DE polarity" "0: Active high,1: Active low" bitfld.long 0x0 10. "VSYNC_POLARITY,Vsync polarity" "0: Active high,1: Active low" newline bitfld.long 0x0 9. "HSYNC_POLARITY,Hsync polarity" "0: Active high,1: Active low" group.long ($2+0x20)++0x3 line.long 0x0 "SWRST,DISP_INn Software Reset Control Register" bitfld.long 0x0 1. "SW_RST,Software reset" "0: No action,1: Software reset is available" group.long ($2+0x30)++0x3 line.long 0x0 "IE,DISP_INn Interrupt Enable Register" bitfld.long 0x0 1. "FOVF_IE1,FIFO 1 overflow interrupt enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "FOVF_IE0,FIFO 0 overflow interrupt enable" "0: Disable,1: Enable" group.long ($2+0x40)++0x3 line.long 0x0 "IS,DISP_INn Interrupt Status Register" eventfld.long 0x0 1. "FOVF_IS1,FIFO 1 overflow interrupt status" "0: Did not occur,1: Occurred" eventfld.long 0x0 0. "FOVF_IS0,FIFO 0 overflow interrupt status" "0: Did not occur,1: Occurred" group.long ($2+0x50)++0x3 line.long 0x0 "ICTRL,DISP_INn Interleaving Control Register" hexmask.long.word 0x0 0.--11. 1. "WIDTH,Width control for interleaving operation" tree.end repeat.end tree.end tree "DISPLAY_SEERIS" base ad:0x4B400000 group.long 0x0++0x3 line.long 0x0 "comctrl_IPIdentifier,IP Identifier for this SEERIS derivate." hexmask.long.byte 0x0 28.--31. 1. "comctrl_IPFamily,IP family" newline hexmask.long.byte 0x0 24.--27. 1. "comctrl_IPConfiguration,Ip configuration" newline hexmask.long.byte 0x0 20.--23. 1. "comctrl_IPApplication,IP application" newline hexmask.long.byte 0x0 16.--19. 1. "comctrl_IPFeatureSet,IP feature set (complexity of implemented features e." newline hexmask.long.byte 0x0 12.--15. 1. "comctrl_IPEvolution,IP evolution" newline hexmask.long.byte 0x0 8.--11. 1. "comctrl_DesignMaturityLevel,Design maturity level (corresponds to status at time of IP delivery)" newline hexmask.long.byte 0x0 4.--7. 1. "comctrl_DesignDeliveryID,Design delivery ID (increased with each official delivery when maturity keeps the same)." newline hexmask.long.byte 0x0 0.--3. 1. "comctrl_Reserved,Reserved bits" wgroup.long 0x1000++0x3 line.long 0x0 "irq_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "irq_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1004++0x3 line.long 0x0 "irq_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "irq_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "irq_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "irq_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1008++0xB line.long 0x0 "irq_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "irq_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "irq_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "irq_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "irq_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "irq_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x1014++0x17 line.long 0x0 "irq_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "irq_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "irq_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "irq_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "irq_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "irq_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "irq_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "irq_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "irq_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "irq_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "irq_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "irq_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x102C++0xB line.long 0x0 "irq_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "irq_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "irq_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "irq_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "irq_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "irq_InterruptStatus2,Same as InterruptStatus2." wgroup.long 0x2000++0x3 line.long 0x0 "domainmask_MaskLockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "domainmask_MaskLockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2004++0x3 line.long 0x0 "domainmask_MaskLockStatus,Protection status of this address block." bitfld.long 0x0 8. "domainmask_MaskFreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "domainmask_MaskPrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "domainmask_MaskLockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2008++0x27 line.long 0x0 "domainmask_store9_domain_mask0,Pixel Engine domain mask 0 for endpoint store9." bitfld.long 0x0 31. "domainmask_store9_dm_vscaler4,Processing unit vscaler4 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 30. "domainmask_store9_dm_hscaler4,Processing unit hscaler4 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 29. "domainmask_store9_dm_matrix4,Processing unit matrix4 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 28. "domainmask_store9_dm_fetcheco2,Processing unit fetcheco2 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 27. "domainmask_store9_dm_fetchyuv2,Processing unit fetchyuv2 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 26. "domainmask_store9_dm_fetcheco1,Processing unit fetcheco1 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 25. "domainmask_store9_dm_fetchyuv1,Processing unit fetchyuv1 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 24. "domainmask_store9_dm_fetcheco0,Processing unit fetcheco0 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 23. "domainmask_store9_dm_fetchyuv0,Processing unit fetchyuv0 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 22. "domainmask_store9_dm_fetchyuv3,Processing unit fetchyuv3 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 21. "domainmask_store9_dm_fetchlayer1,Processing unit fetchlayer1 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 20. "domainmask_store9_dm_fetchlayer0,Processing unit fetchlayer0 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 19. "domainmask_store9_dm_layerblend6,Processing unit layerblend6 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 18. "domainmask_store9_dm_layerblend5,Processing unit layerblend5 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 17. "domainmask_store9_dm_layerblend4,Processing unit layerblend4 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 16. "domainmask_store9_dm_layerblend3,Processing unit layerblend3 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 15. "domainmask_store9_dm_layerblend2,Processing unit layerblend2 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 14. "domainmask_store9_dm_layerblend1,Processing unit layerblend1 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 13. "domainmask_store9_dm_constframe5,Processing unit constframe5 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 12. "domainmask_store9_dm_constframe1,Processing unit constframe1 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 11. "domainmask_store9_dm_constframe4,Processing unit constframe4 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 10. "domainmask_store9_dm_constframe0,Processing unit constframe0 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 9. "domainmask_store9_dm_filter9,Processing unit filter9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 8. "domainmask_store9_dm_vscaler9,Processing unit vscaler9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 7. "domainmask_store9_dm_hscaler9,Processing unit hscaler9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 6. "domainmask_store9_dm_fetcheco9,Processing unit fetcheco9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 5. "domainmask_store9_dm_fetchdecode9,Processing unit fetchdecode9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 4. "domainmask_store9_dm_fetchrot9,Processing unit fetchrot9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 3. "domainmask_store9_dm_blitblend9,Processing unit blitblend9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 2. "domainmask_store9_dm_matrix9,Processing unit matrix9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 1. "domainmask_store9_dm_clut9,Processing unit clut9 allowed for endpoint store9." "0,1" newline bitfld.long 0x0 0. "domainmask_store9_dm_rop9,Processing unit rop9 allowed for endpoint store9." "0,1" line.long 0x4 "domainmask_extdst0_domain_mask0,Pixel Engine domain mask 0 for endpoint extdst0." bitfld.long 0x4 31. "domainmask_extdst0_dm_vscaler4,Processing unit vscaler4 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 30. "domainmask_extdst0_dm_hscaler4,Processing unit hscaler4 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 29. "domainmask_extdst0_dm_matrix4,Processing unit matrix4 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 28. "domainmask_extdst0_dm_fetcheco2,Processing unit fetcheco2 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 27. "domainmask_extdst0_dm_fetchyuv2,Processing unit fetchyuv2 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 26. "domainmask_extdst0_dm_fetcheco1,Processing unit fetcheco1 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 25. "domainmask_extdst0_dm_fetchyuv1,Processing unit fetchyuv1 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 24. "domainmask_extdst0_dm_fetcheco0,Processing unit fetcheco0 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 23. "domainmask_extdst0_dm_fetchyuv0,Processing unit fetchyuv0 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 22. "domainmask_extdst0_dm_fetchyuv3,Processing unit fetchyuv3 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 21. "domainmask_extdst0_dm_fetchlayer1,Processing unit fetchlayer1 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 20. "domainmask_extdst0_dm_fetchlayer0,Processing unit fetchlayer0 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 19. "domainmask_extdst0_dm_layerblend6,Processing unit layerblend6 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 18. "domainmask_extdst0_dm_layerblend5,Processing unit layerblend5 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 17. "domainmask_extdst0_dm_layerblend4,Processing unit layerblend4 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 16. "domainmask_extdst0_dm_layerblend3,Processing unit layerblend3 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 15. "domainmask_extdst0_dm_layerblend2,Processing unit layerblend2 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 14. "domainmask_extdst0_dm_layerblend1,Processing unit layerblend1 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 13. "domainmask_extdst0_dm_constframe5,Processing unit constframe5 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 12. "domainmask_extdst0_dm_constframe1,Processing unit constframe1 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 11. "domainmask_extdst0_dm_constframe4,Processing unit constframe4 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 10. "domainmask_extdst0_dm_constframe0,Processing unit constframe0 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 9. "domainmask_extdst0_dm_filter9,Processing unit filter9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 8. "domainmask_extdst0_dm_vscaler9,Processing unit vscaler9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 7. "domainmask_extdst0_dm_hscaler9,Processing unit hscaler9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 6. "domainmask_extdst0_dm_fetcheco9,Processing unit fetcheco9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 5. "domainmask_extdst0_dm_fetchdecode9,Processing unit fetchdecode9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 4. "domainmask_extdst0_dm_fetchrot9,Processing unit fetchrot9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 3. "domainmask_extdst0_dm_blitblend9,Processing unit blitblend9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 2. "domainmask_extdst0_dm_matrix9,Processing unit matrix9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 1. "domainmask_extdst0_dm_clut9,Processing unit clut9 allowed for endpoint extdst0." "0,1" newline bitfld.long 0x4 0. "domainmask_extdst0_dm_rop9,Processing unit rop9 allowed for endpoint extdst0." "0,1" line.long 0x8 "domainmask_extdst4_domain_mask0,Pixel Engine domain mask 0 for endpoint extdst4." bitfld.long 0x8 31. "domainmask_extdst4_dm_vscaler4,Processing unit vscaler4 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 30. "domainmask_extdst4_dm_hscaler4,Processing unit hscaler4 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 29. "domainmask_extdst4_dm_matrix4,Processing unit matrix4 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 28. "domainmask_extdst4_dm_fetcheco2,Processing unit fetcheco2 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 27. "domainmask_extdst4_dm_fetchyuv2,Processing unit fetchyuv2 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 26. "domainmask_extdst4_dm_fetcheco1,Processing unit fetcheco1 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 25. "domainmask_extdst4_dm_fetchyuv1,Processing unit fetchyuv1 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 24. "domainmask_extdst4_dm_fetcheco0,Processing unit fetcheco0 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 23. "domainmask_extdst4_dm_fetchyuv0,Processing unit fetchyuv0 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 22. "domainmask_extdst4_dm_fetchyuv3,Processing unit fetchyuv3 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 21. "domainmask_extdst4_dm_fetchlayer1,Processing unit fetchlayer1 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 20. "domainmask_extdst4_dm_fetchlayer0,Processing unit fetchlayer0 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 19. "domainmask_extdst4_dm_layerblend6,Processing unit layerblend6 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 18. "domainmask_extdst4_dm_layerblend5,Processing unit layerblend5 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 17. "domainmask_extdst4_dm_layerblend4,Processing unit layerblend4 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 16. "domainmask_extdst4_dm_layerblend3,Processing unit layerblend3 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 15. "domainmask_extdst4_dm_layerblend2,Processing unit layerblend2 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 14. "domainmask_extdst4_dm_layerblend1,Processing unit layerblend1 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 13. "domainmask_extdst4_dm_constframe5,Processing unit constframe5 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 12. "domainmask_extdst4_dm_constframe1,Processing unit constframe1 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 11. "domainmask_extdst4_dm_constframe4,Processing unit constframe4 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 10. "domainmask_extdst4_dm_constframe0,Processing unit constframe0 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 9. "domainmask_extdst4_dm_filter9,Processing unit filter9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 8. "domainmask_extdst4_dm_vscaler9,Processing unit vscaler9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 7. "domainmask_extdst4_dm_hscaler9,Processing unit hscaler9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 6. "domainmask_extdst4_dm_fetcheco9,Processing unit fetcheco9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 5. "domainmask_extdst4_dm_fetchdecode9,Processing unit fetchdecode9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 4. "domainmask_extdst4_dm_fetchrot9,Processing unit fetchrot9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 3. "domainmask_extdst4_dm_blitblend9,Processing unit blitblend9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 2. "domainmask_extdst4_dm_matrix9,Processing unit matrix9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 1. "domainmask_extdst4_dm_clut9,Processing unit clut9 allowed for endpoint extdst4." "0,1" newline bitfld.long 0x8 0. "domainmask_extdst4_dm_rop9,Processing unit rop9 allowed for endpoint extdst4." "0,1" line.long 0xC "domainmask_extdst1_domain_mask0,Pixel Engine domain mask 0 for endpoint extdst1." bitfld.long 0xC 31. "domainmask_extdst1_dm_vscaler4,Processing unit vscaler4 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 30. "domainmask_extdst1_dm_hscaler4,Processing unit hscaler4 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 29. "domainmask_extdst1_dm_matrix4,Processing unit matrix4 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 28. "domainmask_extdst1_dm_fetcheco2,Processing unit fetcheco2 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 27. "domainmask_extdst1_dm_fetchyuv2,Processing unit fetchyuv2 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 26. "domainmask_extdst1_dm_fetcheco1,Processing unit fetcheco1 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 25. "domainmask_extdst1_dm_fetchyuv1,Processing unit fetchyuv1 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 24. "domainmask_extdst1_dm_fetcheco0,Processing unit fetcheco0 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 23. "domainmask_extdst1_dm_fetchyuv0,Processing unit fetchyuv0 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 22. "domainmask_extdst1_dm_fetchyuv3,Processing unit fetchyuv3 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 21. "domainmask_extdst1_dm_fetchlayer1,Processing unit fetchlayer1 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 20. "domainmask_extdst1_dm_fetchlayer0,Processing unit fetchlayer0 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 19. "domainmask_extdst1_dm_layerblend6,Processing unit layerblend6 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 18. "domainmask_extdst1_dm_layerblend5,Processing unit layerblend5 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 17. "domainmask_extdst1_dm_layerblend4,Processing unit layerblend4 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 16. "domainmask_extdst1_dm_layerblend3,Processing unit layerblend3 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 15. "domainmask_extdst1_dm_layerblend2,Processing unit layerblend2 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 14. "domainmask_extdst1_dm_layerblend1,Processing unit layerblend1 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 13. "domainmask_extdst1_dm_constframe5,Processing unit constframe5 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 12. "domainmask_extdst1_dm_constframe1,Processing unit constframe1 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 11. "domainmask_extdst1_dm_constframe4,Processing unit constframe4 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 10. "domainmask_extdst1_dm_constframe0,Processing unit constframe0 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 9. "domainmask_extdst1_dm_filter9,Processing unit filter9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 8. "domainmask_extdst1_dm_vscaler9,Processing unit vscaler9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 7. "domainmask_extdst1_dm_hscaler9,Processing unit hscaler9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 6. "domainmask_extdst1_dm_fetcheco9,Processing unit fetcheco9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 5. "domainmask_extdst1_dm_fetchdecode9,Processing unit fetchdecode9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 4. "domainmask_extdst1_dm_fetchrot9,Processing unit fetchrot9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 3. "domainmask_extdst1_dm_blitblend9,Processing unit blitblend9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 2. "domainmask_extdst1_dm_matrix9,Processing unit matrix9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 1. "domainmask_extdst1_dm_clut9,Processing unit clut9 allowed for endpoint extdst1." "0,1" newline bitfld.long 0xC 0. "domainmask_extdst1_dm_rop9,Processing unit rop9 allowed for endpoint extdst1." "0,1" line.long 0x10 "domainmask_extdst5_domain_mask0,Pixel Engine domain mask 0 for endpoint extdst5." bitfld.long 0x10 31. "domainmask_extdst5_dm_vscaler4,Processing unit vscaler4 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 30. "domainmask_extdst5_dm_hscaler4,Processing unit hscaler4 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 29. "domainmask_extdst5_dm_matrix4,Processing unit matrix4 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 28. "domainmask_extdst5_dm_fetcheco2,Processing unit fetcheco2 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 27. "domainmask_extdst5_dm_fetchyuv2,Processing unit fetchyuv2 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 26. "domainmask_extdst5_dm_fetcheco1,Processing unit fetcheco1 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 25. "domainmask_extdst5_dm_fetchyuv1,Processing unit fetchyuv1 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 24. "domainmask_extdst5_dm_fetcheco0,Processing unit fetcheco0 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 23. "domainmask_extdst5_dm_fetchyuv0,Processing unit fetchyuv0 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 22. "domainmask_extdst5_dm_fetchyuv3,Processing unit fetchyuv3 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 21. "domainmask_extdst5_dm_fetchlayer1,Processing unit fetchlayer1 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 20. "domainmask_extdst5_dm_fetchlayer0,Processing unit fetchlayer0 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 19. "domainmask_extdst5_dm_layerblend6,Processing unit layerblend6 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 18. "domainmask_extdst5_dm_layerblend5,Processing unit layerblend5 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 17. "domainmask_extdst5_dm_layerblend4,Processing unit layerblend4 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 16. "domainmask_extdst5_dm_layerblend3,Processing unit layerblend3 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 15. "domainmask_extdst5_dm_layerblend2,Processing unit layerblend2 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 14. "domainmask_extdst5_dm_layerblend1,Processing unit layerblend1 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 13. "domainmask_extdst5_dm_constframe5,Processing unit constframe5 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 12. "domainmask_extdst5_dm_constframe1,Processing unit constframe1 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 11. "domainmask_extdst5_dm_constframe4,Processing unit constframe4 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 10. "domainmask_extdst5_dm_constframe0,Processing unit constframe0 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 9. "domainmask_extdst5_dm_filter9,Processing unit filter9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 8. "domainmask_extdst5_dm_vscaler9,Processing unit vscaler9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 7. "domainmask_extdst5_dm_hscaler9,Processing unit hscaler9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 6. "domainmask_extdst5_dm_fetcheco9,Processing unit fetcheco9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 5. "domainmask_extdst5_dm_fetchdecode9,Processing unit fetchdecode9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 4. "domainmask_extdst5_dm_fetchrot9,Processing unit fetchrot9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 3. "domainmask_extdst5_dm_blitblend9,Processing unit blitblend9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 2. "domainmask_extdst5_dm_matrix9,Processing unit matrix9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 1. "domainmask_extdst5_dm_clut9,Processing unit clut9 allowed for endpoint extdst5." "0,1" newline bitfld.long 0x10 0. "domainmask_extdst5_dm_rop9,Processing unit rop9 allowed for endpoint extdst5." "0,1" line.long 0x14 "domainmask_SEERIS_Display_Static,Global settings for SEERIS Display configuration." bitfld.long 0x14 0. "domainmask_display_pipeline_synchronization,Enables synchronization of display pipelines for dual pipeline operation." "0,1" line.long 0x18 "domainmask_extdst0_Static,Static pixel engine configuration for extdst0" bitfld.long 0x18 15. "domainmask_extdst0_is_display_master,Defines the extdst0 synchronizer pipeline endpoint is the synchronization master" "0,1" line.long 0x1C "domainmask_extdst4_Static,Static pixel engine configuration for extdst4" bitfld.long 0x1C 15. "domainmask_extdst4_is_display_master,Defines the extdst4 synchronizer pipeline endpoint is the synchronization master" "0,1" line.long 0x20 "domainmask_extdst1_Static,Static pixel engine configuration for extdst1" bitfld.long 0x20 15. "domainmask_extdst1_is_display_master,Defines the extdst1 synchronizer pipeline endpoint is the synchronization master" "0,1" line.long 0x24 "domainmask_extdst5_Static,Static pixel engine configuration for extdst5" bitfld.long 0x24 15. "domainmask_extdst5_is_display_master,Defines the extdst5 synchronizer pipeline endpoint is the synchronization master" "0,1" wgroup.long 0x3000++0x3 line.long 0x0 "cmdseqmask_MaskLockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "cmdseqmask_MaskLockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x3004++0x3 line.long 0x0 "cmdseqmask_MaskLockStatus,Protection status of this address block." bitfld.long 0x0 8. "cmdseqmask_MaskFreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "cmdseqmask_MaskPrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "cmdseqmask_MaskLockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x3008++0x7 line.long 0x0 "cmdseqmask_cmdseq_access_mask0,Each bit describes whether register in the corresponding 64kByte address block is allowed to be written from the command sequencer." hexmask.long 0x0 0.--31. 1. "cmdseqmask_cs_access_mask0,Bit N is the mask for SEERIS 64kByte address block beginning at address N*64kByte." line.long 0x4 "cmdseqmask_cmdseq_access_mask1,Each bit describes whether register in the corresponding 64kByte address block is allowed to be written from the command sequencer." hexmask.long 0x4 0.--31. 1. "cmdseqmask_cs_access_mask1,Bit N is the mask for SEERIS 64kByte address block beginning at address (N+32)*64kByte." group.long 0x10000++0x3 line.long 0x0 "cmdseq_HIF,Command input buffer" hexmask.long 0x0 0.--31. 1. "cmdseq_CommandFIFO,Writing an instruction to this field will add it to the command FIFO." wgroup.long 0x10100++0x3 line.long 0x0 "cmdseq_LockUnlockHIF,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "cmdseq_LockUnlockHIF,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x10104++0x3 line.long 0x0 "cmdseq_LockStatusHIF,Protection status of this address block." bitfld.long 0x0 8. "cmdseq_FreezeStatusHIF,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "cmdseq_PrivilegeStatusHIF,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "cmdseq_LockStatusHIF,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" wgroup.long 0x10180++0x3 line.long 0x0 "cmdseq_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "cmdseq_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x10184++0x3 line.long 0x0 "cmdseq_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "cmdseq_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "cmdseq_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "cmdseq_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x10188++0xF line.long 0x0 "cmdseq_BufferAddress,Command buffer address register" hexmask.long 0x0 5.--31. 1. "cmdseq_Addr,Command buffer base address." newline bitfld.long 0x0 0. "cmdseq_Local,When enabled a local buffer is used as command FIFO instead of the external one which is specified by 'Addr' and 'Size' fields." "0,1" line.long 0x4 "cmdseq_BufferAddressMSB,Command buffer address register" hexmask.long.byte 0x4 0.--7. 1. "cmdseq_AddrMSB,Command buffer base address." line.long 0x8 "cmdseq_BufferSize,Command buffer size register" hexmask.long.word 0x8 3.--15. 1. "cmdseq_Size,Size of command buffer in multiples of 32 byte; a value of 0 is equal to 0x10000 words (0x40000 bytes)." line.long 0xC "cmdseq_WatermarkControl,Watermark Control register" hexmask.long.word 0xC 16.--31. 1. "cmdseq_HighWM,High water mark" newline hexmask.long.word 0xC 0.--15. 1. "cmdseq_LowWM,Low water mark" wgroup.long 0x10198++0x3 line.long 0x0 "cmdseq_Control,Control register" bitfld.long 0x0 4. "cmdseq_Clear,Clear internal data pipelines and core state by writing a 1" "0,1" newline bitfld.long 0x0 3. "cmdseq_ClrCmdBuf,Clear command buffer by writing a 1" "0,1" newline bitfld.long 0x0 2. "cmdseq_ClrRbuf,Clear read prefetch buffer by writing a 1" "0,1" newline bitfld.long 0x0 0. "cmdseq_ClrAxiw,Clear axiwrite controller by writing a 1" "0,1" rgroup.long 0x1019C++0x3 line.long 0x0 "cmdseq_Status,Status register" bitfld.long 0x0 31. "cmdseq_ErrorHalt,Execution stopped after illegal instruction" "0,1" newline bitfld.long 0x0 30. "cmdseq_Idle,Command sequencer is in IDLE state" "0,1" newline bitfld.long 0x0 29. "cmdseq_WriteBusy,If this is 1 then the command sequencer write paths are not idle." "0,1" newline bitfld.long 0x0 28. "cmdseq_ReadBusy,If this is 1 then the command sequencer AXI read path is not idle." "0,1" newline bitfld.long 0x0 27. "cmdseq_Watchdog,Watchdog expired" "0,1" newline bitfld.long 0x0 26. "cmdseq_FIFOWMState,Water mark state" "0,1" newline bitfld.long 0x0 25. "cmdseq_FIFOFull,Command FIFO full flag" "0,1" newline bitfld.long 0x0 24. "cmdseq_FIFOEmpty,Command FIFO empty flag" "0,1" newline hexmask.long.tbyte 0x0 0.--16. 1. "cmdseq_FIFOSpace,Available space in command FIFO in number of 32-bit words." group.long 0x101A0++0xF line.long 0x0 "cmdseq_PrefetchWindowStart,PrefetchWindowStart register" hexmask.long 0x0 2.--31. 1. "cmdseq_PWStart,Start address of prefetch window" line.long 0x4 "cmdseq_PrefetchWindowStartMSB,PrefetchWindowStart register MSB bits" hexmask.long.byte 0x4 0.--7. 1. "cmdseq_PWStartMSB,Start address of prefetch window" line.long 0x8 "cmdseq_PrefetchWindowEnd,PrefetchWindowEnd register" hexmask.long 0x8 2.--31. 1. "cmdseq_PWEnd,End address of prefetch window" line.long 0xC "cmdseq_PrefetchWindowEndMSB,PrefetchWindowEnd register MSB bits" hexmask.long.byte 0xC 0.--7. 1. "cmdseq_PWEndMSB,End address of prefetch window" wgroup.long 0x11000++0x3 line.long 0x0 "cmdseqirq_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "cmdseqirq_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x11004++0x3 line.long 0x0 "cmdseqirq_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "cmdseqirq_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "cmdseqirq_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "cmdseqirq_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x11008++0xB line.long 0x0 "cmdseqirq_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "cmdseqirq_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "cmdseqirq_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "cmdseqirq_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "cmdseqirq_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "cmdseqirq_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x11014++0x17 line.long 0x0 "cmdseqirq_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "cmdseqirq_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "cmdseqirq_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "cmdseqirq_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "cmdseqirq_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "cmdseqirq_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "cmdseqirq_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "cmdseqirq_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "cmdseqirq_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "cmdseqirq_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "cmdseqirq_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "cmdseqirq_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x1102C++0xB line.long 0x0 "cmdseqirq_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "cmdseqirq_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "cmdseqirq_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "cmdseqirq_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "cmdseqirq_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "cmdseqirq_InterruptStatus2,Same as InterruptStatus2." group.long 0x12000++0x3 line.long 0x0 "generalpurpose_GeneralPurpose,General purpose config memory" hexmask.long 0x0 0.--31. 1. "generalpurpose_GeneralPurpose,General purpose config memory entry does not have any function." group.long 0x20000++0xF line.long 0x0 "xpc_Control,xpc_Control" bitfld.long 0x0 31. "xpc_OTCDisable,Disable OTC Counters" "0,1" newline bitfld.long 0x0 30. "xpc_IncrementMode,Enable increment mode for latency measurement" "0,1" newline bitfld.long 0x0 1.--2. "xpc_Mode,Measurement mode" "0,1,2,3" newline bitfld.long 0x0 0. "xpc_Enable,Measurement enable" "0,1" line.long 0x4 "xpc_Timer,xpc_Timer" hexmask.long.byte 0x4 28.--31. 1. "xpc_Divider,Predivider value of timer; preset value is 2^Divider - 1" newline hexmask.long 0x4 0.--27. 1. "xpc_Load,Timer preset value" line.long 0x8 "xpc_MeasurementTimeControl,xpc_MeasurementTimeControl" bitfld.long 0x8 31. "xpc_MTEnable,Enable measurment time" "0,1" newline hexmask.long.tbyte 0x8 0.--19. 1. "xpc_MTDivider,Predivider for Measurement Time" line.long 0xC "xpc_SW_Tag,xpc_SW_Tag" hexmask.long 0xC 0.--31. 1. "xpc_Tag,Tag for SW usage" rgroup.long 0x20010++0x7 line.long 0x0 "xpc_MeasurementTime,xpc_MeasurementTime" hexmask.long 0x0 0.--31. 1. "xpc_Time,Current timestamp of measurement" line.long 0x4 "xpc_Global_Counter,xpc_Global_Counter" hexmask.long 0x4 0.--31. 1. "xpc_Global,Counts total number of clock cycles of measurement period" group.long 0x20018++0x3 line.long 0x0 "xpc_MU00_Switch,xpc_MU00_Switch" hexmask.long.byte 0x0 0.--3. 1. "xpc_MU00_Select,Selects measurement source" rgroup.long 0x2001C++0x13 line.long 0x0 "xpc_MU00_Data_Counter,xpc_MU00_Data_Counter" hexmask.long 0x0 0.--31. 1. "xpc_MU00_Data,Counts valid data cycles within measurement period" line.long 0x4 "xpc_MU00_Busy_Counter,xpc_MU00_Busy_Counter" hexmask.long 0x4 0.--31. 1. "xpc_MU00_Busy,Counts busy cycles within measurement period" line.long 0x8 "xpc_MU00_Transfer_Counter,xpc_MU00_Transfer_Counter" hexmask.long 0x8 0.--31. 1. "xpc_MU00_Transfer,Counts number of transfers within measurement period" line.long 0xC "xpc_MU00_Addrbusy_Counter,xpc_MU00_Addrbusy_Counter" hexmask.long 0xC 0.--31. 1. "xpc_MU00_Addrbusy,Counts address bus busy cycles within measurement period" line.long 0x10 "xpc_MU00_Latency_Counter,xpc_MU00_Latency_Counter" hexmask.long 0x10 0.--31. 1. "xpc_MU00_Latency,Accumulates outstanding transfers within measurement period" group.long 0x20030++0x3 line.long 0x0 "xpc_MU01_Switch,xpc_MU01_Switch" hexmask.long.byte 0x0 0.--3. 1. "xpc_MU01_Select,Selects measurement source" rgroup.long 0x20034++0x13 line.long 0x0 "xpc_MU01_Data_Counter,xpc_MU01_Data_Counter" hexmask.long 0x0 0.--31. 1. "xpc_MU01_Data,Counts valid data cycles within measurement period" line.long 0x4 "xpc_MU01_Busy_Counter,xpc_MU01_Busy_Counter" hexmask.long 0x4 0.--31. 1. "xpc_MU01_Busy,Counts busy cycles within measurement period" line.long 0x8 "xpc_MU01_Transfer_Counter,xpc_MU01_Transfer_Counter" hexmask.long 0x8 0.--31. 1. "xpc_MU01_Transfer,Counts number of transfers within measurement period" line.long 0xC "xpc_MU01_Addrbusy_Counter,xpc_MU01_Addrbusy_Counter" hexmask.long 0xC 0.--31. 1. "xpc_MU01_Addrbusy,Counts address bus busy cycles within measurement period" line.long 0x10 "xpc_MU01_Latency_Counter,xpc_MU01_Latency_Counter" hexmask.long 0x10 0.--31. 1. "xpc_MU01_Latency,Accumulates outstanding transfers within measurement period" group.long 0x20048++0x3 line.long 0x0 "xpc_MU02_Switch,xpc_MU02_Switch" hexmask.long.byte 0x0 0.--3. 1. "xpc_MU02_Select,Selects measurement source" rgroup.long 0x2004C++0x13 line.long 0x0 "xpc_MU02_Data_Counter,xpc_MU02_Data_Counter" hexmask.long 0x0 0.--31. 1. "xpc_MU02_Data,Counts valid data cycles within measurement period" line.long 0x4 "xpc_MU02_Busy_Counter,xpc_MU02_Busy_Counter" hexmask.long 0x4 0.--31. 1. "xpc_MU02_Busy,Counts busy cycles within measurement period" line.long 0x8 "xpc_MU02_Transfer_Counter,xpc_MU02_Transfer_Counter" hexmask.long 0x8 0.--31. 1. "xpc_MU02_Transfer,Counts number of transfers within measurement period" line.long 0xC "xpc_MU02_Addrbusy_Counter,xpc_MU02_Addrbusy_Counter" hexmask.long 0xC 0.--31. 1. "xpc_MU02_Addrbusy,Counts address bus busy cycles within measurement period" line.long 0x10 "xpc_MU02_Latency_Counter,xpc_MU02_Latency_Counter" hexmask.long 0x10 0.--31. 1. "xpc_MU02_Latency,Accumulates outstanding transfers within measurement period" group.long 0x20060++0x3 line.long 0x0 "xpc_MU03_Switch,xpc_MU03_Switch" hexmask.long.byte 0x0 0.--3. 1. "xpc_MU03_Select,Selects measurement source" rgroup.long 0x20064++0x13 line.long 0x0 "xpc_MU03_Data_Counter,xpc_MU03_Data_Counter" hexmask.long 0x0 0.--31. 1. "xpc_MU03_Data,Counts valid data cycles within measurement period" line.long 0x4 "xpc_MU03_Busy_Counter,xpc_MU03_Busy_Counter" hexmask.long 0x4 0.--31. 1. "xpc_MU03_Busy,Counts busy cycles within measurement period" line.long 0x8 "xpc_MU03_Transfer_Counter,xpc_MU03_Transfer_Counter" hexmask.long 0x8 0.--31. 1. "xpc_MU03_Transfer,Counts number of transfers within measurement period" line.long 0xC "xpc_MU03_Addrbusy_Counter,xpc_MU03_Addrbusy_Counter" hexmask.long 0xC 0.--31. 1. "xpc_MU03_Addrbusy,Counts address bus busy cycles within measurement period" line.long 0x10 "xpc_MU03_Latency_Counter,xpc_MU03_Latency_Counter" hexmask.long 0x10 0.--31. 1. "xpc_MU03_Latency,Accumulates outstanding transfers within measurement period" group.long 0x20078++0x3 line.long 0x0 "xpc_MU04_Switch,xpc_MU04_Switch" hexmask.long.byte 0x0 0.--3. 1. "xpc_MU04_Select,Selects measurement source" rgroup.long 0x2007C++0x13 line.long 0x0 "xpc_MU04_Data_Counter,xpc_MU04_Data_Counter" hexmask.long 0x0 0.--31. 1. "xpc_MU04_Data,Counts valid data cycles within measurement period" line.long 0x4 "xpc_MU04_Busy_Counter,xpc_MU04_Busy_Counter" hexmask.long 0x4 0.--31. 1. "xpc_MU04_Busy,Counts busy cycles within measurement period" line.long 0x8 "xpc_MU04_Transfer_Counter,xpc_MU04_Transfer_Counter" hexmask.long 0x8 0.--31. 1. "xpc_MU04_Transfer,Counts number of transfers within measurement period" line.long 0xC "xpc_MU04_Addrbusy_Counter,xpc_MU04_Addrbusy_Counter" hexmask.long 0xC 0.--31. 1. "xpc_MU04_Addrbusy,Counts address bus busy cycles within measurement period" line.long 0x10 "xpc_MU04_Latency_Counter,xpc_MU04_Latency_Counter" hexmask.long 0x10 0.--31. 1. "xpc_MU04_Latency,Accumulates outstanding transfers within measurement period" wgroup.long 0x31000++0x3 line.long 0x0 "blitirq_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "blitirq_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x31004++0x3 line.long 0x0 "blitirq_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "blitirq_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "blitirq_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "blitirq_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x31008++0xB line.long 0x0 "blitirq_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "blitirq_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "blitirq_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "blitirq_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "blitirq_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "blitirq_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x31014++0x17 line.long 0x0 "blitirq_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "blitirq_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "blitirq_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "blitirq_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "blitirq_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "blitirq_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "blitirq_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "blitirq_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "blitirq_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "blitirq_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "blitirq_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "blitirq_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x3102C++0xB line.long 0x0 "blitirq_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "blitirq_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "blitirq_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "blitirq_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "blitirq_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "blitirq_InterruptStatus2,Same as InterruptStatus2." wgroup.long 0x40000++0x3 line.long 0x0 "pixeng_rop9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_rop9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x40004++0x3 line.long 0x0 "pixeng_rop9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_rop9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_rop9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_rop9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x40008++0xB line.long 0x0 "pixeng_rop9_StaticControl,Raster Operation static control register" bitfld.long 0x0 0. "pixeng_rop9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_rop9_Control,Raster Operation control register" bitfld.long 0x4 10. "pixeng_rop9_TertDiv2,Selects whether to divide the tertiary input color components by two or not for ADD mode." "0,1" newline bitfld.long 0x4 9. "pixeng_rop9_SecDiv2,Selects whether to divide the secondary input color components by two or not for ADD mode." "0,1" newline bitfld.long 0x4 8. "pixeng_rop9_PrimDiv2,Selects whether to divide the primary input color components by two or not for ADD mode." "0,1" newline bitfld.long 0x4 7. "pixeng_rop9_RedMode,Selects the mode for the red component channel has no effect in NEUTRAL mode" "0,1" newline bitfld.long 0x4 6. "pixeng_rop9_GreenMode,Selects the mode for the green component channel has no effect in NEUTRAL mode" "0,1" newline bitfld.long 0x4 5. "pixeng_rop9_BlueMode,Selects the mode for the blue component channel has no effect in NEUTRAL mode" "0,1" newline bitfld.long 0x4 4. "pixeng_rop9_AlphaMode,Selects the mode for the alpha component channel has no effect in NEUTRAL mode" "0,1" newline bitfld.long 0x4 0. "pixeng_rop9_Mode,Operation mode for rop" "0,1" line.long 0x8 "pixeng_rop9_RasterOperationIndices,ROP operation indices" hexmask.long.byte 0x8 24.--31. 1. "pixeng_rop9_OpIndexRed,Red operation index" newline hexmask.long.byte 0x8 16.--23. 1. "pixeng_rop9_OpIndexGreen,Green operation index" newline hexmask.long.byte 0x8 8.--15. 1. "pixeng_rop9_OpIndexBlue,Blue operation index" newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_rop9_OpIndexAlpha,Alpha operation index" rgroup.long 0x40014++0xB line.long 0x0 "pixeng_rop9_PrimControlWord,Value of last received primary control word" hexmask.long 0x0 0.--31. 1. "pixeng_rop9_P_VAL,Value of last received control word on the primary input." line.long 0x4 "pixeng_rop9_SecControlWord,Value of last received secondary control word" hexmask.long 0x4 0.--31. 1. "pixeng_rop9_S_VAL,Value of last received control word on the secondary input." line.long 0x8 "pixeng_rop9_TertControlWord,Value of last received tertiary control word" hexmask.long 0x8 0.--31. 1. "pixeng_rop9_T_VAL,Value of last received control word on the tertiary input." wgroup.long 0x41000++0x3 line.long 0x0 "pixeng_rop9cfg_rop9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_rop9cfg_rop9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x41004++0x3 line.long 0x0 "pixeng_rop9cfg_rop9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_rop9cfg_rop9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_rop9cfg_rop9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_rop9cfg_rop9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x41008++0x3 line.long 0x0 "pixeng_rop9cfg_rop9_Dynamic,Dynamic pixel engine configuration for rop9" bitfld.long 0x0 24.--25. "pixeng_rop9cfg_rop9_clken,Enable of rop9 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 16.--21. 1. "pixeng_rop9cfg_rop9_tert_sel,Selection of the source for the tert input of the rop9 module" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_rop9cfg_rop9_sec_sel,Selection of the source for the sec input of the rop9 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_rop9cfg_rop9_prim_sel,Selection of the source for the prim input of the rop9 module" rgroup.long 0x4100C++0x3 line.long 0x0 "pixeng_rop9cfg_rop9_Status,Status information for pixel engine configuration of rop9" bitfld.long 0x0 16.--18. "pixeng_rop9cfg_rop9_sel,Status of the connection of the rop9 module" "0,1,2,3,4,5,6,7" wgroup.long 0x50000++0x3 line.long 0x0 "pixeng_clut9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_clut9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x50004++0x3 line.long 0x0 "pixeng_clut9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_clut9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_clut9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_clut9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x50008++0xF line.long 0x0 "pixeng_clut9_StaticControl,CLUT static control register" bitfld.long 0x0 0. "pixeng_clut9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_clut9_UnshadowedControl,CLUT unshadowed control register" bitfld.long 0x4 2. "pixeng_clut9_R_EN,Write enable for writing the red color LUT entry from the host (allows writing a single color entry without a read-modify-write cycle)" "0,1" newline bitfld.long 0x4 1. "pixeng_clut9_G_EN,Write enable for writing the green color LUT entry from the host (allows writing a single color entry without a read-modify-write cycle)" "0,1" newline bitfld.long 0x4 0. "pixeng_clut9_B_EN,Write enable for writing the blue color LUT entry from the host (allows writing a single color entry without a read-modify-write cycle)" "0,1" line.long 0x8 "pixeng_clut9_Control,CLUT control register" hexmask.long.byte 0x8 8.--11. 1. "pixeng_clut9_IDX_BITS,CLut: Number of msb bits of the red color input used for the LUT index input in R_TO_RGB(A) mode." newline bitfld.long 0x8 6. "pixeng_clut9_AlphaInvert,Chooses whether to disable lookup for alpha components smaller or greater/equal than 128." "0,1" newline bitfld.long 0x8 5. "pixeng_clut9_AlphaMask,Enables the alpha mask mode." "0,1" newline bitfld.long 0x8 4. "pixeng_clut9_COL_8BIT,Color (red green blue) output bitwidth select" "0,1" newline bitfld.long 0x8 0.--1. "pixeng_clut9_MODE,Operation mode for color lookup table" "0,1,2,3" line.long 0xC "pixeng_clut9_Status,CLUT status register" bitfld.long 0xC 4. "pixeng_clut9_READ_TIMEOUT,Timeout detected when reading from the LUT" "0,1" newline bitfld.long 0xC 0. "pixeng_clut9_WRITE_TIMEOUT,Timeout detected when writing to the LUT" "0,1" rgroup.long 0x50018++0x3 line.long 0x0 "pixeng_clut9_LastControlWord,Value of last received control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_clut9_L_VAL,Value of last received control word." group.long 0x50400++0x3 line.long 0x0 "pixeng_clut9_LUT,Look Up Table" hexmask.long.word 0x0 20.--29. 1. "pixeng_clut9_RED,Red component" newline hexmask.long.word 0x0 10.--19. 1. "pixeng_clut9_GREEN,Green component" newline hexmask.long.word 0x0 0.--9. 1. "pixeng_clut9_BLUE,Blue component" wgroup.long 0x51000++0x3 line.long 0x0 "pixeng_clut9cfg_clut9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_clut9cfg_clut9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x51004++0x3 line.long 0x0 "pixeng_clut9cfg_clut9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_clut9cfg_clut9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_clut9cfg_clut9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_clut9cfg_clut9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x51008++0x3 line.long 0x0 "pixeng_clut9cfg_clut9_Dynamic,Dynamic pixel engine configuration for clut9" hexmask.long.byte 0x0 0.--5. 1. "pixeng_clut9cfg_clut9_src_sel,Selection of the source for the src input of the clut9 module" rgroup.long 0x5100C++0x3 line.long 0x0 "pixeng_clut9cfg_clut9_Status,Status information for pixel engine configuration of clut9" bitfld.long 0x0 16.--18. "pixeng_clut9cfg_clut9_sel,Status of the connection of the clut9 module" "0,1,2,3,4,5,6,7" wgroup.long 0x60000++0x3 line.long 0x0 "pixeng_matrix9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_matrix9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x60004++0x3 line.long 0x0 "pixeng_matrix9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_matrix9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_matrix9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_matrix9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x60008++0x2F line.long 0x0 "pixeng_matrix9_StaticControl,Color Matrix static control register" bitfld.long 0x0 0. "pixeng_matrix9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_matrix9_Control,Color Matrix control register" bitfld.long 0x4 5. "pixeng_matrix9_AlphaInvert,Value 1 inverts the effect of the alpha mask mode when enabled (pixels with alpha value greater or equal 0." "0,1" newline bitfld.long 0x4 4. "pixeng_matrix9_AlphaMask,Value 1 enables the alpha mask mode." "0,1" newline bitfld.long 0x4 0.--1. "pixeng_matrix9_MODE,Operation mode for color matrix" "0,1,2,3" line.long 0x8 "pixeng_matrix9_Red0,Matrix values for calculation of the red output value." hexmask.long.word 0x8 16.--28. 1. "pixeng_matrix9_A12,Value for green input." newline hexmask.long.word 0x8 0.--12. 1. "pixeng_matrix9_A11,Value for red input." line.long 0xC "pixeng_matrix9_Red1,Matrix values for calculation of the red output value." hexmask.long.word 0xC 16.--28. 1. "pixeng_matrix9_A14,Value for alpha input." newline hexmask.long.word 0xC 0.--12. 1. "pixeng_matrix9_A13,Value for blue input." line.long 0x10 "pixeng_matrix9_Green0,Matrix values for calculation of the green output value." hexmask.long.word 0x10 16.--28. 1. "pixeng_matrix9_A22,Value for green input." newline hexmask.long.word 0x10 0.--12. 1. "pixeng_matrix9_A21,Value for red input." line.long 0x14 "pixeng_matrix9_Green1,Matrix values for calculation of the green output value." hexmask.long.word 0x14 16.--28. 1. "pixeng_matrix9_A24,Value for alpha input." newline hexmask.long.word 0x14 0.--12. 1. "pixeng_matrix9_A23,Value for blue input." line.long 0x18 "pixeng_matrix9_Blue0,Matrix values for calculation of the blue output value." hexmask.long.word 0x18 16.--28. 1. "pixeng_matrix9_A32,Value for green input." newline hexmask.long.word 0x18 0.--12. 1. "pixeng_matrix9_A31,Value for red input." line.long 0x1C "pixeng_matrix9_Blue1,Matrix values for calculation of the blue output value." hexmask.long.word 0x1C 16.--28. 1. "pixeng_matrix9_A34,Value for alpha input." newline hexmask.long.word 0x1C 0.--12. 1. "pixeng_matrix9_A33,Value for blue input." line.long 0x20 "pixeng_matrix9_Alpha0,Matrix values for calculation of the alpha output value." hexmask.long.word 0x20 16.--28. 1. "pixeng_matrix9_A42,Value for green input." newline hexmask.long.word 0x20 0.--12. 1. "pixeng_matrix9_A41,Value for red input." line.long 0x24 "pixeng_matrix9_Alpha1,Matrix values for calculation of the alpha output value." hexmask.long.word 0x24 16.--28. 1. "pixeng_matrix9_A44,Value for alpha input." newline hexmask.long.word 0x24 0.--12. 1. "pixeng_matrix9_A43,Value for blue input." line.long 0x28 "pixeng_matrix9_OffsetVector0,Offset vectors for red and green output." hexmask.long.word 0x28 16.--28. 1. "pixeng_matrix9_C2,Green output offset." newline hexmask.long.word 0x28 0.--12. 1. "pixeng_matrix9_C1,Red output offset." line.long 0x2C "pixeng_matrix9_OffsetVector1,Offset vectors for blue and alpha output." hexmask.long.word 0x2C 16.--28. 1. "pixeng_matrix9_C4,Value is a twos complement used for 10bit color component." newline hexmask.long.word 0x2C 0.--12. 1. "pixeng_matrix9_C3,Blue output offset." rgroup.long 0x60038++0x3 line.long 0x0 "pixeng_matrix9_LastControlWord,Value of last received control word. for debugging." hexmask.long 0x0 0.--31. 1. "pixeng_matrix9_L_VAL,Value of last received control word." wgroup.long 0x61000++0x3 line.long 0x0 "pixeng_matrix9cfg_matrix9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_matrix9cfg_matrix9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x61004++0x3 line.long 0x0 "pixeng_matrix9cfg_matrix9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_matrix9cfg_matrix9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_matrix9cfg_matrix9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_matrix9cfg_matrix9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x61008++0x3 line.long 0x0 "pixeng_matrix9cfg_matrix9_Dynamic,Dynamic pixel engine configuration for matrix9" bitfld.long 0x0 24.--25. "pixeng_matrix9cfg_matrix9_clken,Enable of matrix9 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_matrix9cfg_matrix9_src_sel,Selection of the source for the src input of the matrix9 module" rgroup.long 0x6100C++0x3 line.long 0x0 "pixeng_matrix9cfg_matrix9_Status,Status information for pixel engine configuration of matrix9" bitfld.long 0x0 16.--18. "pixeng_matrix9cfg_matrix9_sel,Status of the connection of the matrix9 module" "0,1,2,3,4,5,6,7" wgroup.long 0x70000++0x3 line.long 0x0 "pixeng_blitblend9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_blitblend9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x70004++0x3 line.long 0x0 "pixeng_blitblend9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_blitblend9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_blitblend9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_blitblend9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x70008++0x2B line.long 0x0 "pixeng_blitblend9_StaticControl,BlitBlend static control register" bitfld.long 0x0 0. "pixeng_blitblend9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_blitblend9_Control,BlitBlend control register" bitfld.long 0x4 0. "pixeng_blitblend9_Mode,Operation mode for BlitBlend" "0,1" line.long 0x8 "pixeng_blitblend9_NeutralBorder,Neutral border setup register" bitfld.long 0x8 12.--14. "pixeng_blitblend9_NeutralBorderRight,Number of neutral right border pixels" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_blitblend9_NeutralBorderLeft,Number of neutral left border pixels" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0. "pixeng_blitblend9_NeutralBorderMode,Chooses whether to bypass primary or secondary input pixels" "0,1" line.long 0xC "pixeng_blitblend9_ConstantColor,Constant color register" hexmask.long.byte 0xC 24.--31. 1. "pixeng_blitblend9_ConstantRed,Red and Y (luma)." newline hexmask.long.byte 0xC 16.--23. 1. "pixeng_blitblend9_ConstantGreen,Green and U (chroma)." newline hexmask.long.byte 0xC 8.--15. 1. "pixeng_blitblend9_ConstantBlue,Blue and V (chroma)." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_blitblend9_ConstantAlpha,Alpha." line.long 0x10 "pixeng_blitblend9_ColorRedBlendFunction,Open GL RGB blending factors" hexmask.long.word 0x10 16.--31. 1. "pixeng_blitblend9_BlendFuncColorRedDst,Red component destination blend function" newline hexmask.long.word 0x10 0.--15. 1. "pixeng_blitblend9_BlendFuncColorRedSrc,Red component source blend function" line.long 0x14 "pixeng_blitblend9_ColorGreenBlendFunction,Open GL RGB blending factors" hexmask.long.word 0x14 16.--31. 1. "pixeng_blitblend9_BlendFuncColorGreenDst,Green component destination blend function" newline hexmask.long.word 0x14 0.--15. 1. "pixeng_blitblend9_BlendFuncColorGreenSrc,Green component source blend function" line.long 0x18 "pixeng_blitblend9_ColorBlueBlendFunction,Open GL RGB blending factors" hexmask.long.word 0x18 16.--31. 1. "pixeng_blitblend9_BlendFuncColorBlueDst,Blue component destination blend function" newline hexmask.long.word 0x18 0.--15. 1. "pixeng_blitblend9_BlendFuncColorBlueSrc,Blue component source blend function" line.long 0x1C "pixeng_blitblend9_AlphaBlendFunction,Open GL alpha blending factors" hexmask.long.word 0x1C 16.--31. 1. "pixeng_blitblend9_BlendFuncAlphaDst,Alpha component destination blend function" newline hexmask.long.word 0x1C 0.--15. 1. "pixeng_blitblend9_BlendFuncAlphaSrc,Alpha component source blend function" line.long 0x20 "pixeng_blitblend9_BlendMode1,Open GL and Open VG blending modes for colors red and green" hexmask.long.word 0x20 16.--31. 1. "pixeng_blitblend9_BlendModeColorGreen,Green component blend mode" newline hexmask.long.word 0x20 0.--15. 1. "pixeng_blitblend9_BlendModeColorRed,Red component blend mode" line.long 0x24 "pixeng_blitblend9_BlendMode2,Open GL and Open VG blending modes for color blue and alpha" hexmask.long.word 0x24 16.--31. 1. "pixeng_blitblend9_BlendModeAlpha,Alpha component blend mode" newline hexmask.long.word 0x24 0.--15. 1. "pixeng_blitblend9_BlendModeColorBlue,Blue component blend mode" line.long 0x28 "pixeng_blitblend9_DirectSetup,Direct Control of the BlitBlend Datapath multiplexers. do not change" hexmask.long.word 0x28 16.--25. 1. "pixeng_blitblend9_AlphaDebug,Sets the multiplexers of the alpha datapath directly do not change" newline hexmask.long.word 0x28 0.--9. 1. "pixeng_blitblend9_ColorDebug,Sets the multiplexers of the color datapath directly do not change" rgroup.long 0x70034++0x7 line.long 0x0 "pixeng_blitblend9_PrimControlWord,Value of last received primary control word" hexmask.long 0x0 0.--31. 1. "pixeng_blitblend9_P_VAL,Value of last received control word on primary input." line.long 0x4 "pixeng_blitblend9_SecControlWord,Value of last received secondary control word" hexmask.long 0x4 0.--31. 1. "pixeng_blitblend9_S_VAL,Value of last received control word on secondary input." wgroup.long 0x71000++0x3 line.long 0x0 "pixeng_blitblend9cfg_blitblend9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_blitblend9cfg_blitblend9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x71004++0x3 line.long 0x0 "pixeng_blitblend9cfg_blitblend9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_blitblend9cfg_blitblend9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_blitblend9cfg_blitblend9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_blitblend9cfg_blitblend9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x71008++0x3 line.long 0x0 "pixeng_blitblend9cfg_blitblend9_Dynamic,Dynamic pixel engine configuration for blitblend9" bitfld.long 0x0 24.--25. "pixeng_blitblend9cfg_blitblend9_clken,Enable of blitblend9 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_blitblend9cfg_blitblend9_sec_sel,Selection of the source for the sec input of the blitblend9 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_blitblend9cfg_blitblend9_prim_sel,Selection of the source for the prim input of the blitblend9 module" rgroup.long 0x7100C++0x3 line.long 0x0 "pixeng_blitblend9cfg_blitblend9_Status,Status information for pixel engine configuration of blitblend9" bitfld.long 0x0 16.--18. "pixeng_blitblend9cfg_blitblend9_sel,Status of the connection of the blitblend9 module" "0,1,2,3,4,5,6,7" wgroup.long 0x80000++0x3 line.long 0x0 "pixeng_fetchrot9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchrot9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x80004++0x3 line.long 0x0 "pixeng_fetchrot9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchrot9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchrot9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchrot9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x80008++0x4B line.long 0x0 "pixeng_fetchrot9_StaticControl,Common static control options." bitfld.long 0x0 4. "pixeng_fetchrot9_BaseAddressSelect,Select source of Baseaddress." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchrot9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchrot9_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 31. "pixeng_fetchrot9_LineMode,Fetch buffer cache control." "0,1" newline bitfld.long 0x4 30. "pixeng_fetchrot9_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetchrot9_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetchrot9_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetchrot9_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetchrot9_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchrot9_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetchrot9_RingBufStartAddr0,Ring buffer setup for layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchrot9_RingBufStartAddr0,Start address of the ring buffer." line.long 0xC "pixeng_fetchrot9_RingBufStartAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchrot9_RingBufStartAddrMSB0,MSB bits for start address of the ring buffer." line.long 0x10 "pixeng_fetchrot9_RingBufWrapAddr0,Ring buffer setup for layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetchrot9_RingBufWrapAddr0,End address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_fetchrot9_RingBufWrapAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchrot9_RingBufWrapAddrMSB0,MSB bits of end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_fetchrot9_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x18 0.--31. 1. "pixeng_fetchrot9_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x1C "pixeng_fetchrot9_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x1C 0.--7. 1. "pixeng_fetchrot9_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x20 "pixeng_fetchrot9_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x20 0.--31. 1. "pixeng_fetchrot9_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0x24 "pixeng_fetchrot9_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x24 0.--7. 1. "pixeng_fetchrot9_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x28 "pixeng_fetchrot9_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x28 31. "pixeng_fetchrot9_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x28 30. "pixeng_fetchrot9_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x28 16.--21. 1. "pixeng_fetchrot9_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x28 0.--15. 1. "pixeng_fetchrot9_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x2C "pixeng_fetchrot9_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x2C 16.--29. 1. "pixeng_fetchrot9_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x2C 0.--13. 1. "pixeng_fetchrot9_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x30 "pixeng_fetchrot9_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x30 31. "pixeng_fetchrot9_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x30 24.--27. 1. "pixeng_fetchrot9_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x30 16.--19. 1. "pixeng_fetchrot9_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x30 8.--11. 1. "pixeng_fetchrot9_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x30 0.--3. 1. "pixeng_fetchrot9_ComponentBitsAlpha0,Alpha." line.long 0x34 "pixeng_fetchrot9_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x34 24.--28. 1. "pixeng_fetchrot9_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x34 16.--20. 1. "pixeng_fetchrot9_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x34 8.--12. 1. "pixeng_fetchrot9_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x34 0.--4. 1. "pixeng_fetchrot9_ComponentShiftAlpha0,Alpha." line.long 0x38 "pixeng_fetchrot9_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x38 16.--30. 1. "pixeng_fetchrot9_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x38 0.--14. 1. "pixeng_fetchrot9_LayerXOffset0,Horizontal offset (X)." line.long 0x3C "pixeng_fetchrot9_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x3C 16.--30. 1. "pixeng_fetchrot9_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x3C 0.--14. 1. "pixeng_fetchrot9_ClipWindowXOffset0,Horizontal position (X)." line.long 0x40 "pixeng_fetchrot9_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x40 16.--29. 1. "pixeng_fetchrot9_ClipWindowHeight0,Height." newline hexmask.long.word 0x40 0.--13. 1. "pixeng_fetchrot9_ClipWindowWidth0,Width." line.long 0x44 "pixeng_fetchrot9_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x44 24.--31. 1. "pixeng_fetchrot9_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x44 16.--23. 1. "pixeng_fetchrot9_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x44 8.--15. 1. "pixeng_fetchrot9_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x44 0.--7. 1. "pixeng_fetchrot9_ConstantAlpha0,Alpha." line.long 0x48 "pixeng_fetchrot9_LayerProperty0,Common properties of layer 0." bitfld.long 0x48 31. "pixeng_fetchrot9_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x48 30. "pixeng_fetchrot9_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x48 20. "pixeng_fetchrot9_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x48 17.--18. "pixeng_fetchrot9_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x48 16. "pixeng_fetchrot9_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x48 15. "pixeng_fetchrot9_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x48 14. "pixeng_fetchrot9_RGBAlphaMaskEnable0,Value 1 enables mask alpha (read by another Fetch unit from a separate alpha layer) for RGB pre-multiply." "0,1" newline bitfld.long 0x48 13. "pixeng_fetchrot9_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x48 12. "pixeng_fetchrot9_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x48 11. "pixeng_fetchrot9_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x48 10. "pixeng_fetchrot9_AlphaMaskEnable0,Value 1 enables mask alpha for computing the output alpha." "0,1" newline bitfld.long 0x48 9. "pixeng_fetchrot9_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x48 8. "pixeng_fetchrot9_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x48 4.--5. "pixeng_fetchrot9_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x80058++0x3B line.long 0x0 "pixeng_fetchrot9_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchrot9_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchrot9_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchrot9_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchrot9_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchrot9_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchrot9_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchrot9_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchrot9_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchrot9_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchrot9_WarpControl,Warping control options." bitfld.long 0x8 20. "pixeng_fetchrot9_WRPT_Select,Selects the table for warp reference point calculation." "0,1" newline bitfld.long 0x8 18.--19. "pixeng_fetchrot9_WRPT_YRaster,Selects the Y raster for the warp reference points." "0,1,2,3" newline bitfld.long 0x8 16.--17. "pixeng_fetchrot9_WRPT_XRaster,Selects the X raster for the warp reference points." "0,1,2,3" newline bitfld.long 0x8 12. "pixeng_fetchrot9_WarpSymmetricOffset,Value 1 enables symmetric range for negative and positive coordinate values by adding an offset of +0." "0,1" newline bitfld.long 0x8 8.--9. "pixeng_fetchrot9_WarpCoordinateMode,Content of pixel data in the coordinate layer." "0,1,2,3" newline hexmask.long.byte 0x8 0.--5. 1. "pixeng_fetchrot9_WarpBitsPerPixel,Number of bits per pixel in the coordinate layer which is read by another Fetch unit." line.long 0xC "pixeng_fetchrot9_AffineStartX,Start value X for affine warping." hexmask.long.tbyte 0xC 11.--31. 1. "pixeng_fetchrot9_AffineStartX,Start value for cartesian X coordinate relative to origin." line.long 0x10 "pixeng_fetchrot9_AffineStartY,Start value Y for affine warping." hexmask.long.tbyte 0x10 11.--31. 1. "pixeng_fetchrot9_AffineStartY,Start value for cartesian Y coordinate relative to origin." line.long 0x14 "pixeng_fetchrot9_AffineDeltaXX,DeltaXX increment for affine warping." hexmask.long 0x14 0.--24. 1. "pixeng_fetchrot9_AffineDeltaXX,Increment of cartesian X coordinate for horizontal step (X) in destination frame." line.long 0x18 "pixeng_fetchrot9_AffineDeltaXY,DeltaXY increment for affine warping." hexmask.long 0x18 0.--24. 1. "pixeng_fetchrot9_AffineDeltaXY,Increment of cartesian Y coordinate for horizontal step (X) in destination frame." line.long 0x1C "pixeng_fetchrot9_AffineDeltaYX,DeltaYX increment for affine warping." hexmask.long 0x1C 0.--24. 1. "pixeng_fetchrot9_AffineDeltaYX,Increment of cartesian X coordinate for vertical step (Y) in destination frame." line.long 0x20 "pixeng_fetchrot9_AffineDeltaYY,DeltaYY increment for affine warping." hexmask.long 0x20 0.--24. 1. "pixeng_fetchrot9_AffineDeltaYY,Increment of cartesian Y coordinate for vertical step (Y) in destination frame." line.long 0x24 "pixeng_fetchrot9_ArbStartX,Start value X for arbitrary warping." hexmask.long.tbyte 0x24 0.--20. 1. "pixeng_fetchrot9_ArbStartX,Start point for sample-point interpolation (X coordinate)." line.long 0x28 "pixeng_fetchrot9_ArbStartY,Start value Y for arbitrary warping." hexmask.long.tbyte 0x28 0.--20. 1. "pixeng_fetchrot9_ArbStartY,Start point for sample-point interpolation (Y coordinate)." line.long 0x2C "pixeng_fetchrot9_ArbDelta,Start values for delta incrementation of arbitrary warping." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchrot9_ArbDeltaYY,Y coordinate of vector between start and first sample point." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchrot9_ArbDeltaYX,X coordinate of vector between start and first sample point." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchrot9_ArbDeltaXY,Y coordinate of vector between first and second sample point." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchrot9_ArbDeltaXX,X coordinate of vector between first and second sample point." line.long 0x30 "pixeng_fetchrot9_FIRPositions,FIR sequence control register." hexmask.long.byte 0x30 12.--15. 1. "pixeng_fetchrot9_FIR3Position,Position of fourth pixel." newline hexmask.long.byte 0x30 8.--11. 1. "pixeng_fetchrot9_FIR2Position,Position of third pixel." newline hexmask.long.byte 0x30 4.--7. 1. "pixeng_fetchrot9_FIR1Position,Position of second pixel." newline hexmask.long.byte 0x30 0.--3. 1. "pixeng_fetchrot9_FIR0Position,Position of first pixel." line.long 0x34 "pixeng_fetchrot9_FIRCoefficients,FIR coefficients register." hexmask.long.byte 0x34 24.--31. 1. "pixeng_fetchrot9_FIR3Coefficient,Fourth coefficient." newline hexmask.long.byte 0x34 16.--23. 1. "pixeng_fetchrot9_FIR2Coefficient,Third coefficient." newline hexmask.long.byte 0x34 8.--15. 1. "pixeng_fetchrot9_FIR1Coefficient,Second coefficient." newline hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetchrot9_FIR0Coefficient,First coefficient." line.long 0x38 "pixeng_fetchrot9_Control,Shared common control settings for all layers." bitfld.long 0x38 28.--29. "pixeng_fetchrot9_YUVRot_Mode,Selects the order of YUV component ordering in the source buffer." "0,1,2,3" newline bitfld.long 0x38 27. "pixeng_fetchrot9_YUVRot_En,Enables the rotation for YUV pixel formats." "0,1" newline bitfld.long 0x38 26. "pixeng_fetchrot9_WRPT_En,Enables the warp reference point calculation." "0,1" newline bitfld.long 0x38 25. "pixeng_fetchrot9_Sync_En,Enables synchroniztation input." "0,1" newline bitfld.long 0x38 22.--24. "pixeng_fetchrot9_FilterMode,Use this to select between nearest and bilinear filtering." "0,1,2,3,4,5,6,7" newline bitfld.long 0x38 16. "pixeng_fetchrot9_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x38 7. "pixeng_fetchrot9_RawPixel,Raw pixel mode." "0,1" newline bitfld.long 0x38 5. "pixeng_fetchrot9_YUV422UpsamplingMode,Selects a method for horizontal up-sampling of YUV 4:2:2/4:2:0 input data." "0,1" newline bitfld.long 0x38 3.--4. "pixeng_fetchrot9_InputSelect,Selects function for the frame input port." "0,1,2,3" newline bitfld.long 0x38 0.--2. "pixeng_fetchrot9_RasterMode,Selects a method how to generate source buffer sample points." "0,1,2,3,4,5,6,7" wgroup.long 0x80094++0x7 line.long 0x0 "pixeng_fetchrot9_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchrot9_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchrot9_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchrot9_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x8009C++0xF line.long 0x0 "pixeng_fetchrot9_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchrot9_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetchrot9_ReadAddress0,Ring buffer synchronization for layer 0." hexmask.long 0x4 0.--31. 1. "pixeng_fetchrot9_ReadAddress0,Last burst address that was read from the layer's source buffer." line.long 0x8 "pixeng_fetchrot9_ReadAddressMSB0,Ring buffer synchronization for layer 0." hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchrot9_ReadAddressMSB0,MSB bits of last burst address that was read from the layer's source buffer." line.long 0xC "pixeng_fetchrot9_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0xC 8.--12. 1. "pixeng_fetchrot9_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchrot9_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x800AC++0x3 line.long 0x0 "pixeng_fetchrot9_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchrot9_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchrot9_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x800B0++0xF line.long 0x0 "pixeng_fetchrot9_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchrot9_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchrot9_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchrot9_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchrot9_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetchrot9_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchrot9_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchrot9_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetchrot9_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetchrot9_StatusBusy,Fetch unit is busy." "0,1" line.long 0xC "pixeng_fetchrot9_WarpLineOffset,Offest between current used line and reference line." hexmask.long.word 0xC 16.--30. 1. "pixeng_fetchrot9_MaxLineOffset,Maximum line offset for last frame." newline hexmask.long.word 0xC 0.--14. 1. "pixeng_fetchrot9_MinLineOffset,Minimum line offset for last frame." group.long 0x80100++0x3 line.long 0x0 "pixeng_fetchrot9_WarpInterpolater_X_FilterTable0,Warp x interpolator table." hexmask.long.tbyte 0x0 14.--30. 1. "pixeng_fetchrot9_WINTP_X_Tbl00,Weight for pixel 0." newline hexmask.long.word 0x0 0.--12. 1. "pixeng_fetchrot9_WINTP_X_Tblm1,Weight for pixel -1." group.long 0x80200++0x3 line.long 0x0 "pixeng_fetchrot9_WarpInterpolater_X_FilterTable1,Warp x interpolator table." hexmask.long.word 0x0 18.--30. 1. "pixeng_fetchrot9_WINTP_X_Tblp2,Weight for pixel +2." newline hexmask.long.tbyte 0x0 0.--16. 1. "pixeng_fetchrot9_WINTP_X_Tblp1,Weight for pixel +1." group.long 0x80400++0x3 line.long 0x0 "pixeng_fetchrot9_WarpInterpolater_Y_FilterTable0,Warp y interpolator table." hexmask.long.tbyte 0x0 14.--30. 1. "pixeng_fetchrot9_WINTP_Y_Tbl00,Weight for line 0 +2." newline hexmask.long.word 0x0 0.--12. 1. "pixeng_fetchrot9_WINTP_Y_Tblm1,Weight for line -1 +1." group.long 0x80600++0x3 line.long 0x0 "pixeng_fetchrot9_WRPT_TBL_Control,Warping reference point table. write select." bitfld.long 0x0 0. "pixeng_fetchrot9_WRPT_cfg_Select,Selects the table for warp reference point config access." "0,1" group.long 0x82000++0x3 line.long 0x0 "pixeng_fetchrot9_WarpReferencePointsTable0,Warp reference points table 0." hexmask.long.word 0x0 16.--31. 1. "pixeng_fetchrot9_WRPT0_deltaX,X delta of the warp point (Table 0)." newline hexmask.long.word 0x0 0.--15. 1. "pixeng_fetchrot9_WRPT0_deltaY,Y delta of the warp point (Table 0)." group.long 0x84000++0x3 line.long 0x0 "pixeng_fetchrot9_WarpReferencePointsTable1,Warp reference points table 1." hexmask.long.word 0x0 16.--31. 1. "pixeng_fetchrot9_WRPT1_deltaX,X delta of the warp point (Table 1)." newline hexmask.long.word 0x0 0.--15. 1. "pixeng_fetchrot9_WRPT1_deltaY,Y delta of the warp point (Table 1)." wgroup.long 0x86000++0x3 line.long 0x0 "pixeng_fetchrot9cfg_fetchrot9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchrot9cfg_fetchrot9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x86004++0x3 line.long 0x0 "pixeng_fetchrot9cfg_fetchrot9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchrot9cfg_fetchrot9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchrot9cfg_fetchrot9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchrot9cfg_fetchrot9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x86008++0x3 line.long 0x0 "pixeng_fetchrot9cfg_fetchrot9_Dynamic,Dynamic pixel engine configuration for fetchrot9" hexmask.long.byte 0x0 0.--5. 1. "pixeng_fetchrot9cfg_fetchrot9_src_sel,Selection of the source for the src input of the fetchrot9 module" rgroup.long 0x8600C++0x3 line.long 0x0 "pixeng_fetchrot9cfg_fetchrot9_Status,Status information for pixel engine configuration of fetchrot9" bitfld.long 0x0 16.--18. "pixeng_fetchrot9cfg_fetchrot9_sel,Status of the connection of the fetchrot9 module" "0,1,2,3,4,5,6,7" wgroup.long 0x90000++0x3 line.long 0x0 "pixeng_fetchdecode9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchdecode9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x90004++0x3 line.long 0x0 "pixeng_fetchdecode9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchdecode9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchdecode9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchdecode9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x90008++0x1B line.long 0x0 "pixeng_fetchdecode9_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchdecode9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchdecode9_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetchdecode9_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetchdecode9_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetchdecode9_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetchdecode9_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetchdecode9_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchdecode9_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetchdecode9_RingBufStartAddr0,Ring buffer setup for layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchdecode9_RingBufStartAddr0,Start address of the ring buffer." line.long 0xC "pixeng_fetchdecode9_RingBufStartAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchdecode9_RingBufStartAddrMSB0,MSB bits for start address of the ring buffer." line.long 0x10 "pixeng_fetchdecode9_RingBufWrapAddr0,Ring buffer setup for layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetchdecode9_RingBufWrapAddr0,End address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_fetchdecode9_RingBufWrapAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchdecode9_RingBufWrapAddrMSB0,MSB bits of end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_fetchdecode9_FrameProperties0,Frame property setup for layer 0." bitfld.long 0x18 0. "pixeng_fetchdecode9_FieldId0,Field identifier that is generated for subsequent units (0 = progressive frame or interlaced field with even line indices 1 = odd field)." "0: progressive frame or interlaced field with even..,1: odd field)" group.long 0x90028++0x33 line.long 0x0 "pixeng_fetchdecode9_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchdecode9_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchdecode9_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchdecode9_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchdecode9_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchdecode9_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchdecode9_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchdecode9_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchdecode9_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchdecode9_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchdecode9_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchdecode9_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchdecode9_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchdecode9_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchdecode9_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchdecode9_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchdecode9_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchdecode9_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchdecode9_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchdecode9_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchdecode9_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchdecode9_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchdecode9_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchdecode9_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchdecode9_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchdecode9_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchdecode9_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchdecode9_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchdecode9_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchdecode9_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchdecode9_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchdecode9_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchdecode9_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchdecode9_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchdecode9_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchdecode9_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchdecode9_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchdecode9_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchdecode9_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchdecode9_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchdecode9_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchdecode9_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchdecode9_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchdecode9_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchdecode9_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchdecode9_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchdecode9_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchdecode9_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 14. "pixeng_fetchdecode9_RGBAlphaMaskEnable0,Value 1 enables mask alpha (read by another Fetch unit from a separate alpha layer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchdecode9_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchdecode9_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchdecode9_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 10. "pixeng_fetchdecode9_AlphaMaskEnable0,Value 1 enables mask alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchdecode9_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchdecode9_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchdecode9_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchdecode9_PaletteEnable0,Enables (value = 1) a color palette with 8 bits input and 24 bits output." "0,1" group.long 0x90060++0x13 line.long 0x0 "pixeng_fetchdecode9_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchdecode9_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchdecode9_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchdecode9_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchdecode9_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchdecode9_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchdecode9_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchdecode9_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchdecode9_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchdecode9_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchdecode9_DecodeControl,Control options for RLAD decompression." hexmask.long.byte 0x8 28.--31. 1. "pixeng_fetchdecode9_RLADCompBitsAlpha,Maximum for average number of bits per compressed pixel for Alpha channel." newline hexmask.long.byte 0x8 24.--27. 1. "pixeng_fetchdecode9_RLADCompBitsBlue,Maximum for average number of bits per compressed pixel for Blue or V (chroma) channel." newline hexmask.long.byte 0x8 20.--23. 1. "pixeng_fetchdecode9_RLADCompBitsGreen,Maximum for average number of bits per compressed pixel for Green or U (chroma) channel." newline hexmask.long.byte 0x8 16.--19. 1. "pixeng_fetchdecode9_RLADCompBitsRed,Maximum for average number of bits per compressed pixel for Red or Y (luma) channel." newline bitfld.long 0x8 15. "pixeng_fetchdecode9_RLADEndianness,Changes endianness of decoder for RL mode does not affect any other CompressionModes" "0,1" newline bitfld.long 0x8 0.--1. "pixeng_fetchdecode9_CompressionMode,Algorithm that the encoder used for compression." "0,1,2,3" line.long 0xC "pixeng_fetchdecode9_SourceBufferLength,Source buffer length for compressed data." hexmask.long 0xC 0.--28. 1. "pixeng_fetchdecode9_RLEWords,Number of 32-bit words minus one that are required to decode the run length encoded source buffer." line.long 0x10 "pixeng_fetchdecode9_Control,Shared common control settings for all layers." bitfld.long 0x10 16. "pixeng_fetchdecode9_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x10 8.--10. "pixeng_fetchdecode9_PaletteIdxWidth,Number minus one of least significant bits of pixel data read from the source buffer that are used as index value for color palette look-up." "0,1,2,3,4,5,6,7" newline bitfld.long 0x10 7. "pixeng_fetchdecode9_RawPixel,Raw pixel mode." "0,1" newline bitfld.long 0x10 5. "pixeng_fetchdecode9_YUV422UpsamplingMode,Selects a method for horizontal up-sampling of YUV 4:2:2/4:2:0 input data." "0,1" newline bitfld.long 0x10 3.--4. "pixeng_fetchdecode9_InputSelect,Selects function for the frame input port." "0,1,2,3" newline bitfld.long 0x10 0.--2. "pixeng_fetchdecode9_RasterMode,Selects a method how to generate source buffer sample points." "0,1,2,3,4,5,6,7" wgroup.long 0x90074++0x7 line.long 0x0 "pixeng_fetchdecode9_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchdecode9_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchdecode9_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchdecode9_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x9007C++0x3 line.long 0x0 "pixeng_fetchdecode9_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchdecode9_FetchType,This field can be used to determine what kind of fetch unit this is." group.long 0x90080++0x3 line.long 0x0 "pixeng_fetchdecode9_DecoderStatus,Status information of the RLAD decoder." bitfld.long 0x0 1. "pixeng_fetchdecode9_BufferTooLarge,The buffer size given by RLEWords is too large." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchdecode9_BufferTooSmall,The buffer size given by RLEWords is too small." "0,1" rgroup.long 0x90088++0xB line.long 0x0 "pixeng_fetchdecode9_ReadAddress0,Ring buffer synchronization for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchdecode9_ReadAddress0,Last burst address that was read from the layer's source buffer." line.long 0x4 "pixeng_fetchdecode9_ReadAddressMSB0,Ring buffer synchronization for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchdecode9_ReadAddressMSB0,MSB bits of last burst address that was read from the layer's source buffer." line.long 0x8 "pixeng_fetchdecode9_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x8 8.--12. 1. "pixeng_fetchdecode9_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchdecode9_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x90094++0x3 line.long 0x0 "pixeng_fetchdecode9_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchdecode9_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchdecode9_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x90098++0xB line.long 0x0 "pixeng_fetchdecode9_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchdecode9_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchdecode9_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchdecode9_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchdecode9_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetchdecode9_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchdecode9_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchdecode9_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetchdecode9_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetchdecode9_StatusBusy,Fetch unit is busy." "0,1" group.long 0x90400++0x3 line.long 0x0 "pixeng_fetchdecode9_ColorPalette,Color palette look up table." hexmask.long.tbyte 0x0 0.--23. 1. "pixeng_fetchdecode9_ColorPalette,Entry of the color palette look-up table" wgroup.long 0x91000++0x3 line.long 0x0 "pixeng_fetchdecode9cfg_fetchdecode9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchdecode9cfg_fetchdecode9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x91004++0x3 line.long 0x0 "pixeng_fetchdecode9cfg_fetchdecode9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchdecode9cfg_fetchdecode9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchdecode9cfg_fetchdecode9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchdecode9cfg_fetchdecode9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x91008++0x3 line.long 0x0 "pixeng_fetchdecode9cfg_fetchdecode9_Dynamic,Dynamic pixel engine configuration for fetchdecode9" hexmask.long.byte 0x0 0.--5. 1. "pixeng_fetchdecode9cfg_fetchdecode9_src_sel,Selection of the source for the src input of the fetchdecode9 module" rgroup.long 0x9100C++0x3 line.long 0x0 "pixeng_fetchdecode9cfg_fetchdecode9_Status,Status information for pixel engine configuration of fetchdecode9" bitfld.long 0x0 16.--18. "pixeng_fetchdecode9cfg_fetchdecode9_sel,Status of the connection of the fetchdecode9 module" "0,1,2,3,4,5,6,7" wgroup.long 0xA0000++0x3 line.long 0x0 "pixeng_fetcheco9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xA0004++0x3 line.long 0x0 "pixeng_fetcheco9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xA0008++0x3B line.long 0x0 "pixeng_fetcheco9_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetcheco9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetcheco9_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetcheco9_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetcheco9_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetcheco9_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetcheco9_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco9_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco9_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetcheco9_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetcheco9_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0xC "pixeng_fetcheco9_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetcheco9_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x10 "pixeng_fetcheco9_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetcheco9_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0x14 "pixeng_fetcheco9_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetcheco9_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x18 "pixeng_fetcheco9_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x18 31. "pixeng_fetcheco9_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x18 30. "pixeng_fetcheco9_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x18 16.--21. 1. "pixeng_fetcheco9_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x18 0.--15. 1. "pixeng_fetcheco9_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x1C "pixeng_fetcheco9_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x1C 16.--29. 1. "pixeng_fetcheco9_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x1C 0.--13. 1. "pixeng_fetcheco9_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x20 "pixeng_fetcheco9_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x20 31. "pixeng_fetcheco9_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x20 24.--27. 1. "pixeng_fetcheco9_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x20 16.--19. 1. "pixeng_fetcheco9_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x20 8.--11. 1. "pixeng_fetcheco9_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x20 0.--3. 1. "pixeng_fetcheco9_ComponentBitsAlpha0,Alpha." line.long 0x24 "pixeng_fetcheco9_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x24 24.--28. 1. "pixeng_fetcheco9_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x24 16.--20. 1. "pixeng_fetcheco9_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x24 8.--12. 1. "pixeng_fetcheco9_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x24 0.--4. 1. "pixeng_fetcheco9_ComponentShiftAlpha0,Alpha." line.long 0x28 "pixeng_fetcheco9_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x28 16.--30. 1. "pixeng_fetcheco9_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x28 0.--14. 1. "pixeng_fetcheco9_LayerXOffset0,Horizontal offset (X)." line.long 0x2C "pixeng_fetcheco9_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x2C 16.--30. 1. "pixeng_fetcheco9_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x2C 0.--14. 1. "pixeng_fetcheco9_ClipWindowXOffset0,Horizontal position (X)." line.long 0x30 "pixeng_fetcheco9_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x30 16.--29. 1. "pixeng_fetcheco9_ClipWindowHeight0,Height." newline hexmask.long.word 0x30 0.--13. 1. "pixeng_fetcheco9_ClipWindowWidth0,Width." line.long 0x34 "pixeng_fetcheco9_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x34 24.--31. 1. "pixeng_fetcheco9_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x34 16.--23. 1. "pixeng_fetcheco9_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x34 8.--15. 1. "pixeng_fetcheco9_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetcheco9_ConstantAlpha0,Alpha." line.long 0x38 "pixeng_fetcheco9_LayerProperty0,Common properties of layer 0." bitfld.long 0x38 31. "pixeng_fetcheco9_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x38 30. "pixeng_fetcheco9_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x38 4.--5. "pixeng_fetcheco9_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0xA0048++0xB line.long 0x0 "pixeng_fetcheco9_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetcheco9_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetcheco9_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetcheco9_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetcheco9_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetcheco9_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetcheco9_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetcheco9_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetcheco9_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetcheco9_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetcheco9_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetcheco9_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 7. "pixeng_fetcheco9_RawPixel,Raw pixel mode." "0,1" wgroup.long 0xA0054++0x7 line.long 0x0 "pixeng_fetcheco9_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetcheco9_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetcheco9_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetcheco9_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0xA005C++0x7 line.long 0x0 "pixeng_fetcheco9_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetcheco9_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetcheco9_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco9_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco9_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." rgroup.long 0xA0068++0xB line.long 0x0 "pixeng_fetcheco9_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco9_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetcheco9_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco9_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetcheco9_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetcheco9_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetcheco9_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetcheco9_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetcheco9_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetcheco9_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0xA1000++0x3 line.long 0x0 "pixeng_fetcheco9cfg_fetcheco9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco9cfg_fetcheco9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xA1004++0x7 line.long 0x0 "pixeng_fetcheco9cfg_fetcheco9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco9cfg_fetcheco9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco9cfg_fetcheco9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco9cfg_fetcheco9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_fetcheco9cfg_fetcheco9_Status,Status information for pixel engine configuration of fetcheco9" bitfld.long 0x4 16.--18. "pixeng_fetcheco9cfg_fetcheco9_sel,Status of the connection of the fetcheco9 module" "0,1,2,3,4,5,6,7" wgroup.long 0xB0000++0x3 line.long 0x0 "pixeng_hscaler9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_hscaler9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xB0004++0x3 line.long 0x0 "pixeng_hscaler9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_hscaler9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_hscaler9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_hscaler9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xB0008++0xF line.long 0x0 "pixeng_hscaler9_StaticControl,Static control settings that must typically be setup once only." bitfld.long 0x0 0. "pixeng_hscaler9_ShdEn,Shadow enable for RWS type configuration fields (0 = write-through 1 = shadows enabled)" "0: write-through,1: shadows enabled)" line.long 0x4 "pixeng_hscaler9_Setup1,Phase interpolator setup." hexmask.long.tbyte 0x4 0.--19. 1. "pixeng_hscaler9_scale_factor,Scale factor (unsigned fix-point 1." line.long 0x8 "pixeng_hscaler9_Setup2,Phase interpolator setup." hexmask.long.tbyte 0x8 0.--20. 1. "pixeng_hscaler9_phase_offset,Phase shift (signed fix-point 2." line.long 0xC "pixeng_hscaler9_Control,Scaler operation control." hexmask.long.word 0xC 16.--29. 1. "pixeng_hscaler9_output_size,Number of output pixel per input line." newline bitfld.long 0xC 8. "pixeng_hscaler9_filter_mode,Selects scaling filter algorithm." "0,1" newline bitfld.long 0xC 4. "pixeng_hscaler9_scale_mode,Scale mode." "0,1" newline bitfld.long 0xC 0. "pixeng_hscaler9_mode,Switches scaler on/off in datapath." "0,1" wgroup.long 0xB1000++0x3 line.long 0x0 "pixeng_hscaler9cfg_hscaler9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_hscaler9cfg_hscaler9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xB1004++0x3 line.long 0x0 "pixeng_hscaler9cfg_hscaler9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_hscaler9cfg_hscaler9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_hscaler9cfg_hscaler9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_hscaler9cfg_hscaler9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xB1008++0x3 line.long 0x0 "pixeng_hscaler9cfg_hscaler9_Dynamic,Dynamic pixel engine configuration for hscaler9" bitfld.long 0x0 24.--25. "pixeng_hscaler9cfg_hscaler9_clken,Enable of hscaler9 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_hscaler9cfg_hscaler9_src_sel,Selection of the source for the src input of the hscaler9 module" rgroup.long 0xB100C++0x3 line.long 0x0 "pixeng_hscaler9cfg_hscaler9_Status,Status information for pixel engine configuration of hscaler9" bitfld.long 0x0 16.--18. "pixeng_hscaler9cfg_hscaler9_sel,Status of the connection of the hscaler9 module" "0,1,2,3,4,5,6,7" wgroup.long 0xC0000++0x3 line.long 0x0 "pixeng_vscaler9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_vscaler9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xC0004++0x3 line.long 0x0 "pixeng_vscaler9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_vscaler9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_vscaler9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_vscaler9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xC0008++0xF line.long 0x0 "pixeng_vscaler9_StaticControl,Static control settings that must typically be setup once only." bitfld.long 0x0 0. "pixeng_vscaler9_ShdEn,Shadow enable for RWS type configuration fields (0 = write-through 1 = shadows enabled)" "0: write-through,1: shadows enabled)" line.long 0x4 "pixeng_vscaler9_Setup1,Phase interpolator setup." hexmask.long.tbyte 0x4 0.--19. 1. "pixeng_vscaler9_scale_factor,Scale factor (unsigned fix-point 1." line.long 0x8 "pixeng_vscaler9_Setup2,Phase interpolator setup. selected if input and output field polarity is 0." hexmask.long.tbyte 0x8 0.--20. 1. "pixeng_vscaler9_phase_offset,Phase shift (signed fix-point 2." line.long 0xC "pixeng_vscaler9_Control,Scaler operation control." hexmask.long.word 0xC 16.--29. 1. "pixeng_vscaler9_output_size,Number of output lines per input frame." newline bitfld.long 0xC 8. "pixeng_vscaler9_filter_mode,Scaling filter." "0,1" newline bitfld.long 0xC 4. "pixeng_vscaler9_scale_mode,Operation mode." "0,1" newline bitfld.long 0xC 0. "pixeng_vscaler9_mode,Operation mode." "0,1" wgroup.long 0xC1000++0x3 line.long 0x0 "pixeng_vscaler9cfg_vscaler9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_vscaler9cfg_vscaler9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xC1004++0x3 line.long 0x0 "pixeng_vscaler9cfg_vscaler9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_vscaler9cfg_vscaler9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_vscaler9cfg_vscaler9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_vscaler9cfg_vscaler9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xC1008++0x3 line.long 0x0 "pixeng_vscaler9cfg_vscaler9_Dynamic,Dynamic pixel engine configuration for vscaler9" bitfld.long 0x0 24.--25. "pixeng_vscaler9cfg_vscaler9_clken,Enable of vscaler9 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_vscaler9cfg_vscaler9_src_sel,Selection of the source for the src input of the vscaler9 module" rgroup.long 0xC100C++0x3 line.long 0x0 "pixeng_vscaler9cfg_vscaler9_Status,Status information for pixel engine configuration of vscaler9" bitfld.long 0x0 16.--18. "pixeng_vscaler9cfg_vscaler9_sel,Status of the connection of the vscaler9 module" "0,1,2,3,4,5,6,7" wgroup.long 0xD0000++0x3 line.long 0x0 "pixeng_filter9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_filter9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xD0004++0x3 line.long 0x0 "pixeng_filter9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_filter9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_filter9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_filter9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xD0008++0x27 line.long 0x0 "pixeng_filter9_StaticControl,Static control settings that must typically be setup once only." bitfld.long 0x0 0. "pixeng_filter9_ShdEn,If ShdEn==1 shadow registers are loaded when indicated by hardware signal ( a command signal in the data stream at frame start )." "0,1" line.long 0x4 "pixeng_filter9_Control,Filter operation main control." bitfld.long 0x4 28.--29. "pixeng_filter9_buffer_format,Selects the pixel storage format for the line buffers." "0,1,2,3" newline hexmask.long.word 0x4 8.--23. 1. "pixeng_filter9_filter_mode,Filter mode of operation is controlled by filter_mode field." newline bitfld.long 0x4 4.--5. "pixeng_filter9_tile_mode,Selects how filter samples outside the input frame are treated." "0,1,2,3" newline bitfld.long 0x4 0. "pixeng_filter9_mode,The filter can be by-passed or switched by mode field." "0,1" line.long 0x8 "pixeng_filter9_FIR_control,FIR filter operation control." hexmask.long.byte 0x8 8.--11. 1. "pixeng_filter9_FIR_exponent,FIR product sum is divided by 2**FIR_exponent and rounded." newline hexmask.long.byte 0x8 0.--3. 1. "pixeng_filter9_FIR_component_select,Bit 3 enables R or Y component for filtering bit 2 G or U bit 1 B or V and bit 0 alpha component." line.long 0xC "pixeng_filter9_Coefficients0,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0xC 24.--31. 1. "pixeng_filter9_coeff3_0,Coefficient[3][0]." newline hexmask.long.byte 0xC 16.--23. 1. "pixeng_filter9_coeff2_0,Coefficient[2][0]." newline hexmask.long.byte 0xC 8.--15. 1. "pixeng_filter9_coeff1_0,Coefficient[1][0]." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_filter9_coeff0_0,Coefficient[0][0]." line.long 0x10 "pixeng_filter9_Coefficients1,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0x10 24.--31. 1. "pixeng_filter9_coeff2_1,Coefficient[2][1]." newline hexmask.long.byte 0x10 16.--23. 1. "pixeng_filter9_coeff1_1,Coefficient[1][1]." newline hexmask.long.byte 0x10 8.--15. 1. "pixeng_filter9_coeff0_1,Coefficient[0][1]." newline hexmask.long.byte 0x10 0.--7. 1. "pixeng_filter9_coeff4_0,Coefficient[4][0]." line.long 0x14 "pixeng_filter9_Coefficients2,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0x14 24.--31. 1. "pixeng_filter9_coeff1_2,Coefficient[1][2]." newline hexmask.long.byte 0x14 16.--23. 1. "pixeng_filter9_coeff0_2,Coefficient[0][2]." newline hexmask.long.byte 0x14 8.--15. 1. "pixeng_filter9_coeff4_1,Coefficient[4][1]." newline hexmask.long.byte 0x14 0.--7. 1. "pixeng_filter9_coeff3_1,Coefficient[3][1]." line.long 0x18 "pixeng_filter9_Coefficients3,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0x18 24.--31. 1. "pixeng_filter9_coeff0_3,Coefficient[0][3]." newline hexmask.long.byte 0x18 16.--23. 1. "pixeng_filter9_coeff4_2,Coefficient[4][2]." newline hexmask.long.byte 0x18 8.--15. 1. "pixeng_filter9_coeff3_2,Coefficient[3][2]." newline hexmask.long.byte 0x18 0.--7. 1. "pixeng_filter9_coeff2_2,Coefficient[2][2]." line.long 0x1C "pixeng_filter9_Coefficients4,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0x1C 24.--31. 1. "pixeng_filter9_coeff4_3,Coefficient[4][3]." newline hexmask.long.byte 0x1C 16.--23. 1. "pixeng_filter9_coeff3_3,Coefficient[3][3]." newline hexmask.long.byte 0x1C 8.--15. 1. "pixeng_filter9_coeff2_3,Coefficient[2][3]." newline hexmask.long.byte 0x1C 0.--7. 1. "pixeng_filter9_coeff1_3,Coefficient[1][3]." line.long 0x20 "pixeng_filter9_Coefficients5,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0x20 24.--31. 1. "pixeng_filter9_coeff3_4,Coefficient[3][4]." newline hexmask.long.byte 0x20 16.--23. 1. "pixeng_filter9_coeff2_4,Coefficient[2][4]." newline hexmask.long.byte 0x20 8.--15. 1. "pixeng_filter9_coeff1_4,Coefficient[1][4]." newline hexmask.long.byte 0x20 0.--7. 1. "pixeng_filter9_coeff0_4,Coefficient[0][4]." line.long 0x24 "pixeng_filter9_Coefficients6,FIR coefficients[column][row] for 5x5 window for filter_mode FIR." hexmask.long.byte 0x24 0.--7. 1. "pixeng_filter9_coeff4_4,Coefficient[4][4]." wgroup.long 0xD1000++0x3 line.long 0x0 "pixeng_filter9cfg_filter9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_filter9cfg_filter9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xD1004++0x3 line.long 0x0 "pixeng_filter9cfg_filter9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_filter9cfg_filter9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_filter9cfg_filter9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_filter9cfg_filter9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xD1008++0x3 line.long 0x0 "pixeng_filter9cfg_filter9_Dynamic,Dynamic pixel engine configuration for filter9" bitfld.long 0x0 24.--25. "pixeng_filter9cfg_filter9_clken,Enable of filter9 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_filter9cfg_filter9_src_sel,Selection of the source for the src input of the filter9 module" rgroup.long 0xD100C++0x3 line.long 0x0 "pixeng_filter9cfg_filter9_Status,Status information for pixel engine configuration of filter9" bitfld.long 0x0 16.--18. "pixeng_filter9cfg_filter9_sel,Status of the connection of the filter9 module" "0,1,2,3,4,5,6,7" wgroup.long 0xE0000++0x3 line.long 0x0 "pixeng_store9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_store9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xE0004++0x3 line.long 0x0 "pixeng_store9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_store9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_store9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_store9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xE0008++0x2B line.long 0x0 "pixeng_store9_StaticControl,Store unit static control register." bitfld.long 0x0 8. "pixeng_store9_BaseAddressAutoUpdate,If enabled (value 1) the base address is automatically updated at the start of each frame." "0,1" newline bitfld.long 0x0 0. "pixeng_store9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_store9_BurstBufferManagement,Burst Buffer setup register." hexmask.long.byte 0x4 24.--31. 1. "pixeng_store9_BurstTimeout,The burst timeout value set as 1024 AXI cycles multiplied by this value." newline bitfld.long 0x4 23. "pixeng_store9_BurstTimerEn,This field enables the timeout for the flexible burst controller." "0,1" newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_store9_FlexibleBurstLengthMax,This field sets the maximum allowed burst length between 1 and 256." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_store9_SetBurstLength,Set this to the burst length that should be used on the AXI interface." line.long 0x8 "pixeng_store9_RingBufStartAddr,Ring buffer setup for destination." hexmask.long 0x8 0.--31. 1. "pixeng_store9_RingBufStartAddr,Lower 32 bits of the start address of the ring buffer." line.long 0xC "pixeng_store9_RingBufStartAddrMSB,Ring buffer setup for destination." hexmask.long.byte 0xC 0.--7. 1. "pixeng_store9_RingBufStartAddrMSB,Upper 8 bits of the start address of the ring buffer." line.long 0x10 "pixeng_store9_RingBufWrapAddr,Ring buffer setup for destination." hexmask.long 0x10 0.--31. 1. "pixeng_store9_RingBufWrapAddr,Lower 32 bits of the end address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_store9_RingBufWrapAddrMSB,Ring buffer setup for destination." hexmask.long.byte 0x14 0.--7. 1. "pixeng_store9_RingBufWrapAddrMSB,Upper 8 bits of the end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_store9_BaseAddress0,Destination buffer 0 base address." hexmask.long 0x18 0.--31. 1. "pixeng_store9_BaseAddress0,Lower 32 bits of the byte aligned start address of the destination buffer 0." line.long 0x1C "pixeng_store9_BaseAddressMSB0,Destination buffer 0 base address." hexmask.long.byte 0x1C 0.--7. 1. "pixeng_store9_BaseAddressMSB0,Upper 8 bits of the byte aligned start address of the destination buffer 0." line.long 0x20 "pixeng_store9_AutoUpdateBaseAddress0,Destination buffer 0 base address for auto update feature." hexmask.long 0x20 0.--31. 1. "pixeng_store9_AutoUpdateBaseAddress0,Lower 32 bits of the byte aligned start address of the destination buffer 0." line.long 0x24 "pixeng_store9_AutoUpdateBaseAddressMSB0,Destination buffer 0 base address for auto update feature." hexmask.long.byte 0x24 0.--7. 1. "pixeng_store9_AutoUpdateBaseAddressMSB0,Upper 8 bits of the byte aligned start address of the destination buffer 0." line.long 0x28 "pixeng_store9_DestinationBufferAttributes0,Destination buffer 0 attributes." bitfld.long 0x28 31. "pixeng_store9_DWordByteSwap0,Swap the Bytes within one DWord before writing into memory." "0,1" newline hexmask.long.byte 0x28 24.--30. 1. "pixeng_store9_BitsPerPixel0,Size of a pixel in the destination buffer 0 in bits." newline bitfld.long 0x28 23. "pixeng_store9_BlueEnable0,Enables Blue Component for this buffer." "0,1" newline bitfld.long 0x28 22. "pixeng_store9_GreenEnable0,Enables Green Component for this buffer." "0,1" newline bitfld.long 0x28 21. "pixeng_store9_RedEnable0,Enables Red Component for this buffer." "0,1" newline bitfld.long 0x28 20. "pixeng_store9_AlphaEnable0,Enables Alpha Component for this buffer." "0,1" newline hexmask.long.tbyte 0x28 0.--16. 1. "pixeng_store9_Stride0,Destination buffer 0 stride in bytes minus one used for address generation." group.long 0xE0038++0xB line.long 0x0 "pixeng_store9_BaseAddress1,Destination buffer 1 base address." hexmask.long 0x0 0.--31. 1. "pixeng_store9_BaseAddress1,Lower 32 bits of the byte aligned start address of the destination buffer 1." line.long 0x4 "pixeng_store9_BaseAddressMSB1,Destination buffer 1 base address." hexmask.long.byte 0x4 0.--7. 1. "pixeng_store9_BaseAddressMSB1,Upper 8 bits of the byte aligned start address of the destination buffer 1." line.long 0x8 "pixeng_store9_DestinationBufferAttributes1,Destination buffer 1 attributes." bitfld.long 0x8 31. "pixeng_store9_DWordByteSwap1,Swap the Bytes within one DWord before writing into memory." "0,1" newline hexmask.long.byte 0x8 24.--29. 1. "pixeng_store9_BitsPerPixel1,Size of a pixel in the destination buffer 1 in bits." newline bitfld.long 0x8 23. "pixeng_store9_BlueEnable1,Enables Blue Component for this buffer." "0,1" newline bitfld.long 0x8 22. "pixeng_store9_GreenEnable1,Enables Green Component for this buffer." "0,1" newline bitfld.long 0x8 21. "pixeng_store9_RedEnable1,Enables Red Component for this buffer." "0,1" newline bitfld.long 0x8 20. "pixeng_store9_AlphaEnable1,Enables Alpha Component for this buffer." "0,1" newline bitfld.long 0x8 18. "pixeng_store9_YDownscale1,Enables vertical downscaling." "0,1" newline bitfld.long 0x8 17. "pixeng_store9_XDownscale1,Enables horizontal downscaling." "0,1" newline hexmask.long.tbyte 0x8 0.--16. 1. "pixeng_store9_Stride1,Destination buffer 1 stride in bytes minus one used for address generation." group.long 0xE0048++0x1F line.long 0x0 "pixeng_store9_BaseAddress2,Destination buffer 2 base address." hexmask.long 0x0 0.--31. 1. "pixeng_store9_BaseAddress2,Lower 32 bits of the byte aligned start address of the destination buffer 2." line.long 0x4 "pixeng_store9_BaseAddressMSB2,Destination buffer 2 base address (upper 8 bits)." hexmask.long.byte 0x4 0.--7. 1. "pixeng_store9_BaseAddressMSB2,Upper 8 bits of the byte aligned start address of the destination buffer 2." line.long 0x8 "pixeng_store9_DestinationBufferAttributes2,Destination buffer 2 attributes." bitfld.long 0x8 31. "pixeng_store9_DWordByteSwap2,Swap the Bytes within one DWord before writing into memory." "0,1" newline hexmask.long.byte 0x8 24.--29. 1. "pixeng_store9_BitsPerPixel2,Size of a pixel in the destination buffer 2 in bits." newline bitfld.long 0x8 23. "pixeng_store9_BlueEnable2,Enables Blue Component for this buffer." "0,1" newline bitfld.long 0x8 22. "pixeng_store9_GreenEnable2,Enables Green Component for this buffer." "0,1" newline bitfld.long 0x8 21. "pixeng_store9_RedEnable2,Enables Red Component for this buffer." "0,1" newline bitfld.long 0x8 20. "pixeng_store9_AlphaEnable2,Enables Alpha Component for this buffer." "0,1" newline bitfld.long 0x8 18. "pixeng_store9_YDownscale2,Enables vertical downscaling." "0,1" newline bitfld.long 0x8 17. "pixeng_store9_XDownscale2,Enables horizontal downscaling." "0,1" newline hexmask.long.tbyte 0x8 0.--16. 1. "pixeng_store9_Stride2,Destination buffer 2 stride in bytes minus one used for address generation." line.long 0xC "pixeng_store9_DestinationBufferDimension,Destination buffer dimension." hexmask.long.word 0xC 16.--29. 1. "pixeng_store9_LineCount,Number of lines of the destination buffer in pixels minus one." newline hexmask.long.word 0xC 0.--13. 1. "pixeng_store9_LineWidth,Width of the destination buffer in pixels minus one." line.long 0x10 "pixeng_store9_FrameOffset,Offset between destination frame and buffer." hexmask.long.word 0x10 16.--30. 1. "pixeng_store9_FrameYOffset,Vertical offset (Y)." newline hexmask.long.word 0x10 0.--14. 1. "pixeng_store9_FrameXOffset,Horizontal offset (X)." line.long 0x14 "pixeng_store9_ColorComponentBits,Color component size of destination buffer" hexmask.long.byte 0x14 24.--27. 1. "pixeng_store9_ComponentBitsRed,Red/Y component bits." newline hexmask.long.byte 0x14 16.--19. 1. "pixeng_store9_ComponentBitsGreen,Green/U component bits." newline hexmask.long.byte 0x14 8.--11. 1. "pixeng_store9_ComponentBitsBlue,Blue/V component bits." newline hexmask.long.byte 0x14 0.--3. 1. "pixeng_store9_ComponentBitsAlpha,Alpha component bits." line.long 0x18 "pixeng_store9_ColorComponentShift,Color component offset of destination buffer." hexmask.long.byte 0x18 24.--28. 1. "pixeng_store9_ComponentShiftRed,Red/Y component shift." newline hexmask.long.byte 0x18 16.--20. 1. "pixeng_store9_ComponentShiftGreen,Green/U component shift." newline hexmask.long.byte 0x18 8.--12. 1. "pixeng_store9_ComponentShiftBlue,Blue/V component shift." newline hexmask.long.byte 0x18 0.--4. 1. "pixeng_store9_ComponentShiftAlpha,Alpha component shift." line.long 0x1C "pixeng_store9_Control,Store unit dynamic control register" bitfld.long 0x1C 22. "pixeng_store9_YUV420DownsamplingMode,Selects a method for horizontal down-sampling when RasterMode is YUV422." "0,1" newline bitfld.long 0x1C 20.--21. "pixeng_store9_YUV422DownsamplingMode,Selects a method for horizontal down-sampling when RasterMode is YUV422." "0,1,2,3" newline bitfld.long 0x1C 18.--19. "pixeng_store9_RasterMode,Selects a method for destination buffer data from input pixels." "0,1,2,3" newline bitfld.long 0x1C 16.--17. "pixeng_store9_YUVConversionMode,Enables different kind of RGB to YUV conversions." "0,1,2,3" newline bitfld.long 0x1C 12. "pixeng_store9_GammaApplyEnable,Enable gamma conversion stage to apply gamma function." "0,1" newline hexmask.long.byte 0x1C 4.--7. 1. "pixeng_store9_DitherOffset,Dither offset that is additionally applied to the spatial offset which is internally generated from the pixel position." newline bitfld.long 0x1C 1. "pixeng_store9_AlphaDitherEnable,Controls whether spatial dithering (value 1) or LSB truncation (value 0) is used when ComponentBitsAlpha is smaller than 8 bits." "0,1" newline bitfld.long 0x1C 0. "pixeng_store9_ColorDitherEnable,Controls whether spatial dithering (value 1) or LSB truncation (value 0) is used when ComponentBitsRed/Green/Blue is smaller than 10 bits for Store derivate or 8 bit for StoreL derivate." "0,1" wgroup.long 0xE0068++0x3 line.long 0x0 "pixeng_store9_Start,Store unit start register" bitfld.long 0x0 0. "pixeng_store9_Start,Writing a one starts processing of the pixel engine." "0,1" rgroup.long 0xE0070++0x17 line.long 0x0 "pixeng_store9_WriteAddress,Ring buffer synchronization." hexmask.long 0x0 0.--31. 1. "pixeng_store9_WriteAddress,Lower 32 bits of the last burst address that was written to the destination buffer." line.long 0x4 "pixeng_store9_WriteAddressMSB,Ring buffer synchronization." hexmask.long.byte 0x4 0.--7. 1. "pixeng_store9_WriteAddressMSB,Upper 8 bits of the last burst address that was written to the destination buffer." line.long 0x8 "pixeng_store9_FrameProperties,Ring buffer synchronization." bitfld.long 0x8 0. "pixeng_store9_FieldId,Field identifier for interlaced video streams (0/1 = even/odd line indices of progressive frame)." "?,1: even/odd line indices of progressive frame)" line.long 0xC "pixeng_store9_BurstBufferProperties,Burst Buffer Property register" hexmask.long.byte 0xC 8.--12. 1. "pixeng_store9_MaxBurstLength,Maximum Burst Length that can be configured." line.long 0x10 "pixeng_store9_LastControlWord,Shows the last control word received" hexmask.long 0x10 0.--31. 1. "pixeng_store9_L_VAL,Shows the last control word received from the pixel engine." line.long 0x14 "pixeng_store9_PerfCounter,Performance counter result" hexmask.long 0x14 0.--31. 1. "pixeng_store9_PerfResult,Returns the performance counter value." group.long 0xE0088++0x3 line.long 0x0 "pixeng_store9_Status,Shows status information" bitfld.long 0x0 8. "pixeng_store9_PixelbusError,A pixel bus error has occured." "0,1" newline rbitfld.long 0x0 6. "pixeng_store9_StatusComplete,Store unit completed all requested AXI transfers" "0,1" newline rbitfld.long 0x0 5. "pixeng_store9_StatusRequest,Store unit requesting on the AXI interface waiting for acknowledge" "0,1" newline rbitfld.long 0x0 4. "pixeng_store9_StatusBuffersIdle,AXI interface buffers are idle" "0,1" newline rbitfld.long 0x0 0. "pixeng_store9_StatusBusy,Store unit is busy" "0,1" wgroup.long 0xE1000++0x3 line.long 0x0 "pixeng_store9cfg_store9_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_store9cfg_store9_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xE1004++0x3 line.long 0x0 "pixeng_store9cfg_store9_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_store9cfg_store9_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_store9cfg_store9_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_store9cfg_store9_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xE1008++0xB line.long 0x0 "pixeng_store9cfg_store9_Static,Static pixel engine configuration for store9" hexmask.long.byte 0x0 16.--23. 1. "pixeng_store9cfg_store9_div,store9 clock dividing factor (ratio is register_value/128 values above 128 are reserved)." newline bitfld.long 0x0 11. "pixeng_store9cfg_store9_SW_Reset,Software reset for store9 synchronizer for debug purposes only" "0,1" newline bitfld.long 0x0 8. "pixeng_store9cfg_store9_Sync_Mode,Synchronization mode for store9 pipeline endpoint synchronizer" "0,1" newline bitfld.long 0x0 4. "pixeng_store9cfg_store9_powerdown,Set this to 1 to activate powerdown or to 0 to deactivate powerdown for the store9 endpoint." "0,1" newline bitfld.long 0x0 0. "pixeng_store9cfg_store9_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed) for pixelbus configuration of pipeline with endpoint store9." "0: write_through,1: shadowed) for pixelbus configuration of pipeline.." line.long 0x4 "pixeng_store9cfg_store9_Dynamic,Dynamic pixel engine configuration for store9" hexmask.long.byte 0x4 0.--5. 1. "pixeng_store9cfg_store9_src_sel,Selection of the source for the src input of the store9 module" line.long 0x8 "pixeng_store9cfg_store9_Request,ShadowLoadRequest register for endpoint store9" hexmask.long.word 0x8 1.--16. 1. "pixeng_store9cfg_store9_ShdLdReq,Vector of shadow load request flag of all sources for destination store9." newline bitfld.long 0x8 0. "pixeng_store9cfg_store9_sel_ShdLdReq,Shadow load request flag for destination store9." "0,1" wgroup.long 0xE1014++0x3 line.long 0x0 "pixeng_store9cfg_store9_Trigger,Trigger bits for pixel engine configuration of store9" bitfld.long 0x0 4. "pixeng_store9cfg_store9_trigger_sequence_complete,pixeng_store9cfg_store9_trigger_sequence_complete" "0,1" newline bitfld.long 0x0 0. "pixeng_store9cfg_store9_Sync_Trigger,Writing a '1' to this field triggers reconfiguration of the pipeline with endpoint store9" "0,1" rgroup.long 0xE1018++0x3 line.long 0x0 "pixeng_store9cfg_store9_Status,Status information for pixel engine configuration of store9" bitfld.long 0x0 8. "pixeng_store9cfg_store9_sync_busy,Synchronization busy status of store9 endpoint" "0,1" newline bitfld.long 0x0 0.--1. "pixeng_store9cfg_store9_pipeline_status,Status of pipeline with endpoint store9" "0,1,2,3" wgroup.long 0xF0000++0x3 line.long 0x0 "pixeng_constframe0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xF0004++0x3 line.long 0x0 "pixeng_constframe0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0xF0008++0xB line.long 0x0 "pixeng_constframe0_StaticControl,ConstFrame unit static control register" bitfld.long 0x0 0. "pixeng_constframe0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_constframe0_FrameDimensions,Output frame dimensions." bitfld.long 0x4 31. "pixeng_constframe0_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x4 16.--29. 1. "pixeng_constframe0_FrameHeight,Frame height in pixels minus one." newline hexmask.long.word 0x4 0.--13. 1. "pixeng_constframe0_FrameWidth,Frame width in pixels minus one." line.long 0x8 "pixeng_constframe0_ConstantColor,Color of output frame." hexmask.long.byte 0x8 24.--31. 1. "pixeng_constframe0_ConstantRed,Red component." newline hexmask.long.byte 0x8 16.--23. 1. "pixeng_constframe0_ConstantGreen,Green component." newline hexmask.long.byte 0x8 8.--15. 1. "pixeng_constframe0_ConstantBlue,Blue component." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_constframe0_ConstantAlpha,Alpha component." wgroup.long 0xF0014++0x7 line.long 0x0 "pixeng_constframe0_ControlTrigger,ConstFrame unit trigger register" bitfld.long 0x0 0. "pixeng_constframe0_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_constframe0_Start,ConstFrame unit start register" bitfld.long 0x4 0. "pixeng_constframe0_Start,Writing a one starts processing it is recommended to use this for debug purposes only." "0,1" rgroup.long 0xF001C++0x3 line.long 0x0 "pixeng_constframe0_Status,Shows status information" bitfld.long 0x0 1. "pixeng_constframe0_ShadowStatus,Shadow load status." "0,1" newline bitfld.long 0x0 0. "pixeng_constframe0_StatusBusy,Unit is busy." "0,1" wgroup.long 0xF1000++0x3 line.long 0x0 "pixeng_constframe0cfg_constframe0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe0cfg_constframe0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0xF1004++0x7 line.long 0x0 "pixeng_constframe0cfg_constframe0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe0cfg_constframe0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe0cfg_constframe0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe0cfg_constframe0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_constframe0cfg_constframe0_Status,Status information for pixel engine configuration of constframe0" bitfld.long 0x4 16.--18. "pixeng_constframe0cfg_constframe0_sel,Status of the connection of the constframe0 module" "0,1,2,3,4,5,6,7" wgroup.long 0x100000++0x3 line.long 0x0 "pixeng_constframe4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x100004++0x3 line.long 0x0 "pixeng_constframe4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x100008++0xB line.long 0x0 "pixeng_constframe4_StaticControl,ConstFrame unit static control register" bitfld.long 0x0 0. "pixeng_constframe4_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_constframe4_FrameDimensions,Output frame dimensions." bitfld.long 0x4 31. "pixeng_constframe4_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x4 16.--29. 1. "pixeng_constframe4_FrameHeight,Frame height in pixels minus one." newline hexmask.long.word 0x4 0.--13. 1. "pixeng_constframe4_FrameWidth,Frame width in pixels minus one." line.long 0x8 "pixeng_constframe4_ConstantColor,Color of output frame." hexmask.long.byte 0x8 24.--31. 1. "pixeng_constframe4_ConstantRed,Red component." newline hexmask.long.byte 0x8 16.--23. 1. "pixeng_constframe4_ConstantGreen,Green component." newline hexmask.long.byte 0x8 8.--15. 1. "pixeng_constframe4_ConstantBlue,Blue component." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_constframe4_ConstantAlpha,Alpha component." wgroup.long 0x100014++0x7 line.long 0x0 "pixeng_constframe4_ControlTrigger,ConstFrame unit trigger register" bitfld.long 0x0 0. "pixeng_constframe4_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_constframe4_Start,ConstFrame unit start register" bitfld.long 0x4 0. "pixeng_constframe4_Start,Writing a one starts processing it is recommended to use this for debug purposes only." "0,1" rgroup.long 0x10001C++0x3 line.long 0x0 "pixeng_constframe4_Status,Shows status information" bitfld.long 0x0 1. "pixeng_constframe4_ShadowStatus,Shadow load status." "0,1" newline bitfld.long 0x0 0. "pixeng_constframe4_StatusBusy,Unit is busy." "0,1" wgroup.long 0x101000++0x3 line.long 0x0 "pixeng_constframe4cfg_constframe4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe4cfg_constframe4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x101004++0x7 line.long 0x0 "pixeng_constframe4cfg_constframe4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe4cfg_constframe4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe4cfg_constframe4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe4cfg_constframe4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_constframe4cfg_constframe4_Status,Status information for pixel engine configuration of constframe4" bitfld.long 0x4 16.--18. "pixeng_constframe4cfg_constframe4_sel,Status of the connection of the constframe4 module" "0,1,2,3,4,5,6,7" wgroup.long 0x110000++0x3 line.long 0x0 "pixeng_extdst0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x110004++0x3 line.long 0x0 "pixeng_extdst0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x110008++0x7 line.long 0x0 "pixeng_extdst0_StaticControl,External Destination static control register" bitfld.long 0x0 12. "pixeng_extdst0_PerfCountMode,Value 1 enables performance counter mode which does not generate an output frame but processes input data as fast as possible instead." "0,1" newline bitfld.long 0x0 8. "pixeng_extdst0_KICK_MODE,Operation mode of generated kick signal" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_extdst0_Control,External Destination shadowed control register" bitfld.long 0x4 0. "pixeng_extdst0_GammaApplyEnable,Enable gamma conversion stage to apply gamma function." "0,1" wgroup.long 0x110010++0x3 line.long 0x0 "pixeng_extdst0_SoftwareKick,External Destination software kick" bitfld.long 0x0 0. "pixeng_extdst0_KICK,Software kick forces a kick signal independent of KICK_MODE." "0,1" group.long 0x110014++0x3 line.long 0x0 "pixeng_extdst0_Status,External Destination Unit current status" bitfld.long 0x0 0. "pixeng_extdst0_CNT_ERR_STS,Pixel count error" "0,1" rgroup.long 0x110018++0xF line.long 0x0 "pixeng_extdst0_ControlWord,Value of last received control word" hexmask.long 0x0 0.--31. 1. "pixeng_extdst0_CW_VAL,Value of last received control word" line.long 0x4 "pixeng_extdst0_CurPixelCnt,pixel count of currently running frame" hexmask.long.word 0x4 16.--31. 1. "pixeng_extdst0_C_YVAL,value of vertical line counter internal counter counting from max-1 to 0" newline hexmask.long.word 0x4 0.--15. 1. "pixeng_extdst0_C_XVAL,value of horizontal pixel counter internal counter counting from max-1 to 0" line.long 0x8 "pixeng_extdst0_LastPixelCnt,pixel count between last two control words" hexmask.long.word 0x8 16.--31. 1. "pixeng_extdst0_L_YVAL,value of vertical line counter" newline hexmask.long.word 0x8 0.--15. 1. "pixeng_extdst0_L_XVAL,value of horizontal pixel counter" line.long 0xC "pixeng_extdst0_PerfCounter,Performance counter result" hexmask.long 0xC 0.--31. 1. "pixeng_extdst0_PerfResult,Returns the performance counter value." wgroup.long 0x111000++0x3 line.long 0x0 "pixeng_extdst0cfg_extdst0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst0cfg_extdst0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x111004++0x3 line.long 0x0 "pixeng_extdst0cfg_extdst0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst0cfg_extdst0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst0cfg_extdst0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst0cfg_extdst0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x111008++0xB line.long 0x0 "pixeng_extdst0cfg_extdst0_Static,Static pixel engine configuration for extdst0" hexmask.long.byte 0x0 16.--23. 1. "pixeng_extdst0cfg_extdst0_div,extdst0 clock dividing factor (ratio is register_value/128 values above 128 are reserved)." newline bitfld.long 0x0 11. "pixeng_extdst0cfg_extdst0_SW_Reset,Software reset for extdst0 synchronizer for debug purposes only" "0,1" newline bitfld.long 0x0 8. "pixeng_extdst0cfg_extdst0_Sync_Mode,Synchronization mode for extdst0 pipeline endpoint synchronizer" "0,1" newline bitfld.long 0x0 4. "pixeng_extdst0cfg_extdst0_powerdown,Set this to 1 to activate powerdown or to 0 to deactivate powerdown for the extdst0 endpoint." "0,1" newline bitfld.long 0x0 0. "pixeng_extdst0cfg_extdst0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed) for pixelbus configuration of pipeline with endpoint extdst0." "0: write_through,1: shadowed) for pixelbus configuration of pipeline.." line.long 0x4 "pixeng_extdst0cfg_extdst0_Dynamic,Dynamic pixel engine configuration for extdst0" hexmask.long.byte 0x4 0.--5. 1. "pixeng_extdst0cfg_extdst0_src_sel,Selection of the source for the src input of the extdst0 module" line.long 0x8 "pixeng_extdst0cfg_extdst0_Request,ShadowLoadRequest register for endpoint extdst0" hexmask.long.word 0x8 1.--16. 1. "pixeng_extdst0cfg_extdst0_ShdLdReq,Vector of shadow load request flag of all sources for destination extdst0." newline bitfld.long 0x8 0. "pixeng_extdst0cfg_extdst0_sel_ShdLdReq,Shadow load request flag for destination extdst0." "0,1" wgroup.long 0x111014++0x3 line.long 0x0 "pixeng_extdst0cfg_extdst0_Trigger,Trigger bits for pixel engine configuration of extdst0" bitfld.long 0x0 4. "pixeng_extdst0cfg_extdst0_trigger_sequence_complete,pixeng_extdst0cfg_extdst0_trigger_sequence_complete" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst0cfg_extdst0_Sync_Trigger,Writing a '1' to this field triggers reconfiguration of the pipeline with endpoint extdst0" "0,1" rgroup.long 0x111018++0x3 line.long 0x0 "pixeng_extdst0cfg_extdst0_Status,Status information for pixel engine configuration of extdst0" bitfld.long 0x0 8. "pixeng_extdst0cfg_extdst0_sync_busy,Synchronization busy status of extdst0 endpoint" "0,1" newline bitfld.long 0x0 0.--1. "pixeng_extdst0cfg_extdst0_pipeline_status,Status of pipeline with endpoint extdst0" "0,1,2,3" wgroup.long 0x120000++0x3 line.long 0x0 "pixeng_extdst4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x120004++0x3 line.long 0x0 "pixeng_extdst4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x120008++0x7 line.long 0x0 "pixeng_extdst4_StaticControl,External Destination static control register" bitfld.long 0x0 12. "pixeng_extdst4_PerfCountMode,Value 1 enables performance counter mode which does not generate an output frame but processes input data as fast as possible instead." "0,1" newline bitfld.long 0x0 8. "pixeng_extdst4_KICK_MODE,Operation mode of generated kick signal" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst4_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_extdst4_Control,External Destination shadowed control register" bitfld.long 0x4 0. "pixeng_extdst4_GammaApplyEnable,Enable gamma conversion stage to apply gamma function." "0,1" wgroup.long 0x120010++0x3 line.long 0x0 "pixeng_extdst4_SoftwareKick,External Destination software kick" bitfld.long 0x0 0. "pixeng_extdst4_KICK,Software kick forces a kick signal independent of KICK_MODE." "0,1" group.long 0x120014++0x3 line.long 0x0 "pixeng_extdst4_Status,External Destination Unit current status" bitfld.long 0x0 0. "pixeng_extdst4_CNT_ERR_STS,Pixel count error" "0,1" rgroup.long 0x120018++0xF line.long 0x0 "pixeng_extdst4_ControlWord,Value of last received control word" hexmask.long 0x0 0.--31. 1. "pixeng_extdst4_CW_VAL,Value of last received control word" line.long 0x4 "pixeng_extdst4_CurPixelCnt,pixel count of currently running frame" hexmask.long.word 0x4 16.--31. 1. "pixeng_extdst4_C_YVAL,value of vertical line counter internal counter counting from max-1 to 0" newline hexmask.long.word 0x4 0.--15. 1. "pixeng_extdst4_C_XVAL,value of horizontal pixel counter internal counter counting from max-1 to 0" line.long 0x8 "pixeng_extdst4_LastPixelCnt,pixel count between last two control words" hexmask.long.word 0x8 16.--31. 1. "pixeng_extdst4_L_YVAL,value of vertical line counter" newline hexmask.long.word 0x8 0.--15. 1. "pixeng_extdst4_L_XVAL,value of horizontal pixel counter" line.long 0xC "pixeng_extdst4_PerfCounter,Performance counter result" hexmask.long 0xC 0.--31. 1. "pixeng_extdst4_PerfResult,Returns the performance counter value." wgroup.long 0x121000++0x3 line.long 0x0 "pixeng_extdst4cfg_extdst4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst4cfg_extdst4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x121004++0x3 line.long 0x0 "pixeng_extdst4cfg_extdst4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst4cfg_extdst4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst4cfg_extdst4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst4cfg_extdst4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x121008++0xB line.long 0x0 "pixeng_extdst4cfg_extdst4_Static,Static pixel engine configuration for extdst4" hexmask.long.byte 0x0 16.--23. 1. "pixeng_extdst4cfg_extdst4_div,extdst4 clock dividing factor (ratio is register_value/128 values above 128 are reserved)." newline bitfld.long 0x0 11. "pixeng_extdst4cfg_extdst4_SW_Reset,Software reset for extdst4 synchronizer for debug purposes only" "0,1" newline bitfld.long 0x0 8. "pixeng_extdst4cfg_extdst4_Sync_Mode,Synchronization mode for extdst4 pipeline endpoint synchronizer" "0,1" newline bitfld.long 0x0 4. "pixeng_extdst4cfg_extdst4_powerdown,Set this to 1 to activate powerdown or to 0 to deactivate powerdown for the extdst4 endpoint." "0,1" newline bitfld.long 0x0 0. "pixeng_extdst4cfg_extdst4_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed) for pixelbus configuration of pipeline with endpoint extdst4." "0: write_through,1: shadowed) for pixelbus configuration of pipeline.." line.long 0x4 "pixeng_extdst4cfg_extdst4_Dynamic,Dynamic pixel engine configuration for extdst4" hexmask.long.byte 0x4 0.--5. 1. "pixeng_extdst4cfg_extdst4_src_sel,Selection of the source for the src input of the extdst4 module" line.long 0x8 "pixeng_extdst4cfg_extdst4_Request,ShadowLoadRequest register for endpoint extdst4" hexmask.long.word 0x8 1.--16. 1. "pixeng_extdst4cfg_extdst4_ShdLdReq,Vector of shadow load request flag of all sources for destination extdst4." newline bitfld.long 0x8 0. "pixeng_extdst4cfg_extdst4_sel_ShdLdReq,Shadow load request flag for destination extdst4." "0,1" wgroup.long 0x121014++0x3 line.long 0x0 "pixeng_extdst4cfg_extdst4_Trigger,Trigger bits for pixel engine configuration of extdst4" bitfld.long 0x0 4. "pixeng_extdst4cfg_extdst4_trigger_sequence_complete,pixeng_extdst4cfg_extdst4_trigger_sequence_complete" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst4cfg_extdst4_Sync_Trigger,Writing a '1' to this field triggers reconfiguration of the pipeline with endpoint extdst4" "0,1" rgroup.long 0x121018++0x3 line.long 0x0 "pixeng_extdst4cfg_extdst4_Status,Status information for pixel engine configuration of extdst4" bitfld.long 0x0 8. "pixeng_extdst4cfg_extdst4_sync_busy,Synchronization busy status of extdst4 endpoint" "0,1" newline bitfld.long 0x0 0.--1. "pixeng_extdst4cfg_extdst4_pipeline_status,Status of pipeline with endpoint extdst4" "0,1,2,3" wgroup.long 0x130000++0x3 line.long 0x0 "pixeng_constframe1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x130004++0x3 line.long 0x0 "pixeng_constframe1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x130008++0xB line.long 0x0 "pixeng_constframe1_StaticControl,ConstFrame unit static control register" bitfld.long 0x0 0. "pixeng_constframe1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_constframe1_FrameDimensions,Output frame dimensions." bitfld.long 0x4 31. "pixeng_constframe1_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x4 16.--29. 1. "pixeng_constframe1_FrameHeight,Frame height in pixels minus one." newline hexmask.long.word 0x4 0.--13. 1. "pixeng_constframe1_FrameWidth,Frame width in pixels minus one." line.long 0x8 "pixeng_constframe1_ConstantColor,Color of output frame." hexmask.long.byte 0x8 24.--31. 1. "pixeng_constframe1_ConstantRed,Red component." newline hexmask.long.byte 0x8 16.--23. 1. "pixeng_constframe1_ConstantGreen,Green component." newline hexmask.long.byte 0x8 8.--15. 1. "pixeng_constframe1_ConstantBlue,Blue component." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_constframe1_ConstantAlpha,Alpha component." wgroup.long 0x130014++0x7 line.long 0x0 "pixeng_constframe1_ControlTrigger,ConstFrame unit trigger register" bitfld.long 0x0 0. "pixeng_constframe1_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_constframe1_Start,ConstFrame unit start register" bitfld.long 0x4 0. "pixeng_constframe1_Start,Writing a one starts processing it is recommended to use this for debug purposes only." "0,1" rgroup.long 0x13001C++0x3 line.long 0x0 "pixeng_constframe1_Status,Shows status information" bitfld.long 0x0 1. "pixeng_constframe1_ShadowStatus,Shadow load status." "0,1" newline bitfld.long 0x0 0. "pixeng_constframe1_StatusBusy,Unit is busy." "0,1" wgroup.long 0x131000++0x3 line.long 0x0 "pixeng_constframe1cfg_constframe1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe1cfg_constframe1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x131004++0x7 line.long 0x0 "pixeng_constframe1cfg_constframe1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe1cfg_constframe1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe1cfg_constframe1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe1cfg_constframe1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_constframe1cfg_constframe1_Status,Status information for pixel engine configuration of constframe1" bitfld.long 0x4 16.--18. "pixeng_constframe1cfg_constframe1_sel,Status of the connection of the constframe1 module" "0,1,2,3,4,5,6,7" wgroup.long 0x140000++0x3 line.long 0x0 "pixeng_constframe5_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe5_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x140004++0x3 line.long 0x0 "pixeng_constframe5_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe5_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe5_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe5_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x140008++0xB line.long 0x0 "pixeng_constframe5_StaticControl,ConstFrame unit static control register" bitfld.long 0x0 0. "pixeng_constframe5_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_constframe5_FrameDimensions,Output frame dimensions." bitfld.long 0x4 31. "pixeng_constframe5_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x4 16.--29. 1. "pixeng_constframe5_FrameHeight,Frame height in pixels minus one." newline hexmask.long.word 0x4 0.--13. 1. "pixeng_constframe5_FrameWidth,Frame width in pixels minus one." line.long 0x8 "pixeng_constframe5_ConstantColor,Color of output frame." hexmask.long.byte 0x8 24.--31. 1. "pixeng_constframe5_ConstantRed,Red component." newline hexmask.long.byte 0x8 16.--23. 1. "pixeng_constframe5_ConstantGreen,Green component." newline hexmask.long.byte 0x8 8.--15. 1. "pixeng_constframe5_ConstantBlue,Blue component." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_constframe5_ConstantAlpha,Alpha component." wgroup.long 0x140014++0x7 line.long 0x0 "pixeng_constframe5_ControlTrigger,ConstFrame unit trigger register" bitfld.long 0x0 0. "pixeng_constframe5_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_constframe5_Start,ConstFrame unit start register" bitfld.long 0x4 0. "pixeng_constframe5_Start,Writing a one starts processing it is recommended to use this for debug purposes only." "0,1" rgroup.long 0x14001C++0x3 line.long 0x0 "pixeng_constframe5_Status,Shows status information" bitfld.long 0x0 1. "pixeng_constframe5_ShadowStatus,Shadow load status." "0,1" newline bitfld.long 0x0 0. "pixeng_constframe5_StatusBusy,Unit is busy." "0,1" wgroup.long 0x141000++0x3 line.long 0x0 "pixeng_constframe5cfg_constframe5_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_constframe5cfg_constframe5_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x141004++0x7 line.long 0x0 "pixeng_constframe5cfg_constframe5_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_constframe5cfg_constframe5_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_constframe5cfg_constframe5_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_constframe5cfg_constframe5_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_constframe5cfg_constframe5_Status,Status information for pixel engine configuration of constframe5" bitfld.long 0x4 16.--18. "pixeng_constframe5cfg_constframe5_sel,Status of the connection of the constframe5 module" "0,1,2,3,4,5,6,7" wgroup.long 0x150000++0x3 line.long 0x0 "pixeng_extdst1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x150004++0x3 line.long 0x0 "pixeng_extdst1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x150008++0x7 line.long 0x0 "pixeng_extdst1_StaticControl,External Destination static control register" bitfld.long 0x0 12. "pixeng_extdst1_PerfCountMode,Value 1 enables performance counter mode which does not generate an output frame but processes input data as fast as possible instead." "0,1" newline bitfld.long 0x0 8. "pixeng_extdst1_KICK_MODE,Operation mode of generated kick signal" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_extdst1_Control,External Destination shadowed control register" bitfld.long 0x4 0. "pixeng_extdst1_GammaApplyEnable,Enable gamma conversion stage to apply gamma function." "0,1" wgroup.long 0x150010++0x3 line.long 0x0 "pixeng_extdst1_SoftwareKick,External Destination software kick" bitfld.long 0x0 0. "pixeng_extdst1_KICK,Software kick forces a kick signal independent of KICK_MODE." "0,1" group.long 0x150014++0x3 line.long 0x0 "pixeng_extdst1_Status,External Destination Unit current status" bitfld.long 0x0 0. "pixeng_extdst1_CNT_ERR_STS,Pixel count error" "0,1" rgroup.long 0x150018++0xF line.long 0x0 "pixeng_extdst1_ControlWord,Value of last received control word" hexmask.long 0x0 0.--31. 1. "pixeng_extdst1_CW_VAL,Value of last received control word" line.long 0x4 "pixeng_extdst1_CurPixelCnt,pixel count of currently running frame" hexmask.long.word 0x4 16.--31. 1. "pixeng_extdst1_C_YVAL,value of vertical line counter internal counter counting from max-1 to 0" newline hexmask.long.word 0x4 0.--15. 1. "pixeng_extdst1_C_XVAL,value of horizontal pixel counter internal counter counting from max-1 to 0" line.long 0x8 "pixeng_extdst1_LastPixelCnt,pixel count between last two control words" hexmask.long.word 0x8 16.--31. 1. "pixeng_extdst1_L_YVAL,value of vertical line counter" newline hexmask.long.word 0x8 0.--15. 1. "pixeng_extdst1_L_XVAL,value of horizontal pixel counter" line.long 0xC "pixeng_extdst1_PerfCounter,Performance counter result" hexmask.long 0xC 0.--31. 1. "pixeng_extdst1_PerfResult,Returns the performance counter value." wgroup.long 0x151000++0x3 line.long 0x0 "pixeng_extdst1cfg_extdst1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst1cfg_extdst1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x151004++0x3 line.long 0x0 "pixeng_extdst1cfg_extdst1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst1cfg_extdst1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst1cfg_extdst1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst1cfg_extdst1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x151008++0xB line.long 0x0 "pixeng_extdst1cfg_extdst1_Static,Static pixel engine configuration for extdst1" hexmask.long.byte 0x0 16.--23. 1. "pixeng_extdst1cfg_extdst1_div,extdst1 clock dividing factor (ratio is register_value/128 values above 128 are reserved)." newline bitfld.long 0x0 11. "pixeng_extdst1cfg_extdst1_SW_Reset,Software reset for extdst1 synchronizer for debug purposes only" "0,1" newline bitfld.long 0x0 8. "pixeng_extdst1cfg_extdst1_Sync_Mode,Synchronization mode for extdst1 pipeline endpoint synchronizer" "0,1" newline bitfld.long 0x0 4. "pixeng_extdst1cfg_extdst1_powerdown,Set this to 1 to activate powerdown or to 0 to deactivate powerdown for the extdst1 endpoint." "0,1" newline bitfld.long 0x0 0. "pixeng_extdst1cfg_extdst1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed) for pixelbus configuration of pipeline with endpoint extdst1." "0: write_through,1: shadowed) for pixelbus configuration of pipeline.." line.long 0x4 "pixeng_extdst1cfg_extdst1_Dynamic,Dynamic pixel engine configuration for extdst1" hexmask.long.byte 0x4 0.--5. 1. "pixeng_extdst1cfg_extdst1_src_sel,Selection of the source for the src input of the extdst1 module" line.long 0x8 "pixeng_extdst1cfg_extdst1_Request,ShadowLoadRequest register for endpoint extdst1" hexmask.long.word 0x8 1.--16. 1. "pixeng_extdst1cfg_extdst1_ShdLdReq,Vector of shadow load request flag of all sources for destination extdst1." newline bitfld.long 0x8 0. "pixeng_extdst1cfg_extdst1_sel_ShdLdReq,Shadow load request flag for destination extdst1." "0,1" wgroup.long 0x151014++0x3 line.long 0x0 "pixeng_extdst1cfg_extdst1_Trigger,Trigger bits for pixel engine configuration of extdst1" bitfld.long 0x0 4. "pixeng_extdst1cfg_extdst1_trigger_sequence_complete,pixeng_extdst1cfg_extdst1_trigger_sequence_complete" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst1cfg_extdst1_Sync_Trigger,Writing a '1' to this field triggers reconfiguration of the pipeline with endpoint extdst1" "0,1" rgroup.long 0x151018++0x3 line.long 0x0 "pixeng_extdst1cfg_extdst1_Status,Status information for pixel engine configuration of extdst1" bitfld.long 0x0 8. "pixeng_extdst1cfg_extdst1_sync_busy,Synchronization busy status of extdst1 endpoint" "0,1" newline bitfld.long 0x0 0.--1. "pixeng_extdst1cfg_extdst1_pipeline_status,Status of pipeline with endpoint extdst1" "0,1,2,3" wgroup.long 0x160000++0x3 line.long 0x0 "pixeng_extdst5_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst5_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x160004++0x3 line.long 0x0 "pixeng_extdst5_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst5_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst5_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst5_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x160008++0x7 line.long 0x0 "pixeng_extdst5_StaticControl,External Destination static control register" bitfld.long 0x0 12. "pixeng_extdst5_PerfCountMode,Value 1 enables performance counter mode which does not generate an output frame but processes input data as fast as possible instead." "0,1" newline bitfld.long 0x0 8. "pixeng_extdst5_KICK_MODE,Operation mode of generated kick signal" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst5_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_extdst5_Control,External Destination shadowed control register" bitfld.long 0x4 0. "pixeng_extdst5_GammaApplyEnable,Enable gamma conversion stage to apply gamma function." "0,1" wgroup.long 0x160010++0x3 line.long 0x0 "pixeng_extdst5_SoftwareKick,External Destination software kick" bitfld.long 0x0 0. "pixeng_extdst5_KICK,Software kick forces a kick signal independent of KICK_MODE." "0,1" group.long 0x160014++0x3 line.long 0x0 "pixeng_extdst5_Status,External Destination Unit current status" bitfld.long 0x0 0. "pixeng_extdst5_CNT_ERR_STS,Pixel count error" "0,1" rgroup.long 0x160018++0xF line.long 0x0 "pixeng_extdst5_ControlWord,Value of last received control word" hexmask.long 0x0 0.--31. 1. "pixeng_extdst5_CW_VAL,Value of last received control word" line.long 0x4 "pixeng_extdst5_CurPixelCnt,pixel count of currently running frame" hexmask.long.word 0x4 16.--31. 1. "pixeng_extdst5_C_YVAL,value of vertical line counter internal counter counting from max-1 to 0" newline hexmask.long.word 0x4 0.--15. 1. "pixeng_extdst5_C_XVAL,value of horizontal pixel counter internal counter counting from max-1 to 0" line.long 0x8 "pixeng_extdst5_LastPixelCnt,pixel count between last two control words" hexmask.long.word 0x8 16.--31. 1. "pixeng_extdst5_L_YVAL,value of vertical line counter" newline hexmask.long.word 0x8 0.--15. 1. "pixeng_extdst5_L_XVAL,value of horizontal pixel counter" line.long 0xC "pixeng_extdst5_PerfCounter,Performance counter result" hexmask.long 0xC 0.--31. 1. "pixeng_extdst5_PerfResult,Returns the performance counter value." wgroup.long 0x161000++0x3 line.long 0x0 "pixeng_extdst5cfg_extdst5_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_extdst5cfg_extdst5_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x161004++0x3 line.long 0x0 "pixeng_extdst5cfg_extdst5_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_extdst5cfg_extdst5_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_extdst5cfg_extdst5_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_extdst5cfg_extdst5_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x161008++0xB line.long 0x0 "pixeng_extdst5cfg_extdst5_Static,Static pixel engine configuration for extdst5" hexmask.long.byte 0x0 16.--23. 1. "pixeng_extdst5cfg_extdst5_div,extdst5 clock dividing factor (ratio is register_value/128 values above 128 are reserved)." newline bitfld.long 0x0 11. "pixeng_extdst5cfg_extdst5_SW_Reset,Software reset for extdst5 synchronizer for debug purposes only" "0,1" newline bitfld.long 0x0 8. "pixeng_extdst5cfg_extdst5_Sync_Mode,Synchronization mode for extdst5 pipeline endpoint synchronizer" "0,1" newline bitfld.long 0x0 4. "pixeng_extdst5cfg_extdst5_powerdown,Set this to 1 to activate powerdown or to 0 to deactivate powerdown for the extdst5 endpoint." "0,1" newline bitfld.long 0x0 0. "pixeng_extdst5cfg_extdst5_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed) for pixelbus configuration of pipeline with endpoint extdst5." "0: write_through,1: shadowed) for pixelbus configuration of pipeline.." line.long 0x4 "pixeng_extdst5cfg_extdst5_Dynamic,Dynamic pixel engine configuration for extdst5" hexmask.long.byte 0x4 0.--5. 1. "pixeng_extdst5cfg_extdst5_src_sel,Selection of the source for the src input of the extdst5 module" line.long 0x8 "pixeng_extdst5cfg_extdst5_Request,ShadowLoadRequest register for endpoint extdst5" hexmask.long.word 0x8 1.--16. 1. "pixeng_extdst5cfg_extdst5_ShdLdReq,Vector of shadow load request flag of all sources for destination extdst5." newline bitfld.long 0x8 0. "pixeng_extdst5cfg_extdst5_sel_ShdLdReq,Shadow load request flag for destination extdst5." "0,1" wgroup.long 0x161014++0x3 line.long 0x0 "pixeng_extdst5cfg_extdst5_Trigger,Trigger bits for pixel engine configuration of extdst5" bitfld.long 0x0 4. "pixeng_extdst5cfg_extdst5_trigger_sequence_complete,pixeng_extdst5cfg_extdst5_trigger_sequence_complete" "0,1" newline bitfld.long 0x0 0. "pixeng_extdst5cfg_extdst5_Sync_Trigger,Writing a '1' to this field triggers reconfiguration of the pipeline with endpoint extdst5" "0,1" rgroup.long 0x161018++0x3 line.long 0x0 "pixeng_extdst5cfg_extdst5_Status,Status information for pixel engine configuration of extdst5" bitfld.long 0x0 8. "pixeng_extdst5cfg_extdst5_sync_busy,Synchronization busy status of extdst5 endpoint" "0,1" newline bitfld.long 0x0 0.--1. "pixeng_extdst5cfg_extdst5_pipeline_status,Status of pipeline with endpoint extdst5" "0,1,2,3" wgroup.long 0x170000++0x3 line.long 0x0 "pixeng_layerblend1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x170004++0x3 line.long 0x0 "pixeng_layerblend1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x170008++0xF line.long 0x0 "pixeng_layerblend1_StaticControl,Static control settings." bitfld.long 0x0 3.--4. "pixeng_layerblend1_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3" newline bitfld.long 0x0 1.--2. "pixeng_layerblend1_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3" newline bitfld.long 0x0 0. "pixeng_layerblend1_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" line.long 0x4 "pixeng_layerblend1_Control,Common control settings." hexmask.long.byte 0x4 22.--25. 1. "pixeng_layerblend1_SecOddRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is odd." newline hexmask.long.byte 0x4 18.--21. 1. "pixeng_layerblend1_SecOddRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is odd and column index is even." newline hexmask.long.byte 0x4 14.--17. 1. "pixeng_layerblend1_SecEvenRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is even and column index is odd." newline hexmask.long.byte 0x4 10.--13. 1. "pixeng_layerblend1_SecEvenRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is even." newline bitfld.long 0x4 9. "pixeng_layerblend1_SecReplicateEn,Enables horizontal replication of pixels by factor 2 on secondary input port." "0,1" newline bitfld.long 0x4 8. "pixeng_layerblend1_SecLowPassEn,Enables a horizontal low-pass filter for the secondary input port." "0,1" newline bitfld.long 0x4 4.--6. "pixeng_layerblend1_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2. "pixeng_layerblend1_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" newline bitfld.long 0x4 0. "pixeng_layerblend1_MODE,Operation mode." "0,1" line.long 0x8 "pixeng_layerblend1_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "pixeng_layerblend1_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "pixeng_layerblend1_SEC_A_BLD_FUNC,Secondary (overlay) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_layerblend1_PRIM_A_BLD_FUNC,Primary (background) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "pixeng_layerblend1_SEC_C_BLD_FUNC,Secondary (overlay) input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "pixeng_layerblend1_PRIM_C_BLD_FUNC,Primary (background) input color blending function" "0,1,2,3,4,5,6,7" line.long 0xC "pixeng_layerblend1_Position,Position of secondary (overlay) input frame" hexmask.long.word 0xC 16.--31. 1. "pixeng_layerblend1_YPOS,vertical position first pixel is at 0 format s15 (twos complement)" newline hexmask.long.word 0xC 0.--15. 1. "pixeng_layerblend1_XPOS,horizontal position first pixel is at 0 format s15 (twos complement)" rgroup.long 0x170018++0x7 line.long 0x0 "pixeng_layerblend1_PrimControlWord,Value of last received primary (background) control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_layerblend1_P_VAL,Value of last received control word" line.long 0x4 "pixeng_layerblend1_SecControlWord,Value of last received secondary (overlay) control word. for debugging" hexmask.long 0x4 0.--31. 1. "pixeng_layerblend1_S_VAL,Value of last received control word" wgroup.long 0x171000++0x3 line.long 0x0 "pixeng_layerblend1cfg_layerblend1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend1cfg_layerblend1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x171004++0x3 line.long 0x0 "pixeng_layerblend1cfg_layerblend1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend1cfg_layerblend1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend1cfg_layerblend1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend1cfg_layerblend1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x171008++0x3 line.long 0x0 "pixeng_layerblend1cfg_layerblend1_Dynamic,Dynamic pixel engine configuration for layerblend1" bitfld.long 0x0 24.--25. "pixeng_layerblend1cfg_layerblend1_clken,Enable of layerblend1 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_layerblend1cfg_layerblend1_sec_sel,Selection of the source for the sec input of the layerblend1 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_layerblend1cfg_layerblend1_prim_sel,Selection of the source for the prim input of the layerblend1 module" rgroup.long 0x17100C++0x3 line.long 0x0 "pixeng_layerblend1cfg_layerblend1_Status,Status information for pixel engine configuration of layerblend1" bitfld.long 0x0 16.--18. "pixeng_layerblend1cfg_layerblend1_sel,Status of the connection of the layerblend1 module" "0,1,2,3,4,5,6,7" wgroup.long 0x180000++0x3 line.long 0x0 "pixeng_layerblend2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x180004++0x3 line.long 0x0 "pixeng_layerblend2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x180008++0xF line.long 0x0 "pixeng_layerblend2_StaticControl,Static control settings." bitfld.long 0x0 3.--4. "pixeng_layerblend2_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3" newline bitfld.long 0x0 1.--2. "pixeng_layerblend2_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3" newline bitfld.long 0x0 0. "pixeng_layerblend2_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" line.long 0x4 "pixeng_layerblend2_Control,Common control settings." hexmask.long.byte 0x4 22.--25. 1. "pixeng_layerblend2_SecOddRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is odd." newline hexmask.long.byte 0x4 18.--21. 1. "pixeng_layerblend2_SecOddRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is odd and column index is even." newline hexmask.long.byte 0x4 14.--17. 1. "pixeng_layerblend2_SecEvenRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is even and column index is odd." newline hexmask.long.byte 0x4 10.--13. 1. "pixeng_layerblend2_SecEvenRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is even." newline bitfld.long 0x4 9. "pixeng_layerblend2_SecReplicateEn,Enables horizontal replication of pixels by factor 2 on secondary input port." "0,1" newline bitfld.long 0x4 8. "pixeng_layerblend2_SecLowPassEn,Enables a horizontal low-pass filter for the secondary input port." "0,1" newline bitfld.long 0x4 4.--6. "pixeng_layerblend2_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2. "pixeng_layerblend2_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" newline bitfld.long 0x4 0. "pixeng_layerblend2_MODE,Operation mode." "0,1" line.long 0x8 "pixeng_layerblend2_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "pixeng_layerblend2_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "pixeng_layerblend2_SEC_A_BLD_FUNC,Secondary (overlay) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_layerblend2_PRIM_A_BLD_FUNC,Primary (background) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "pixeng_layerblend2_SEC_C_BLD_FUNC,Secondary (overlay) input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "pixeng_layerblend2_PRIM_C_BLD_FUNC,Primary (background) input color blending function" "0,1,2,3,4,5,6,7" line.long 0xC "pixeng_layerblend2_Position,Position of secondary (overlay) input frame" hexmask.long.word 0xC 16.--31. 1. "pixeng_layerblend2_YPOS,vertical position first pixel is at 0 format s15 (twos complement)" newline hexmask.long.word 0xC 0.--15. 1. "pixeng_layerblend2_XPOS,horizontal position first pixel is at 0 format s15 (twos complement)" rgroup.long 0x180018++0x7 line.long 0x0 "pixeng_layerblend2_PrimControlWord,Value of last received primary (background) control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_layerblend2_P_VAL,Value of last received control word" line.long 0x4 "pixeng_layerblend2_SecControlWord,Value of last received secondary (overlay) control word. for debugging" hexmask.long 0x4 0.--31. 1. "pixeng_layerblend2_S_VAL,Value of last received control word" wgroup.long 0x181000++0x3 line.long 0x0 "pixeng_layerblend2cfg_layerblend2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend2cfg_layerblend2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x181004++0x3 line.long 0x0 "pixeng_layerblend2cfg_layerblend2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend2cfg_layerblend2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend2cfg_layerblend2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend2cfg_layerblend2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x181008++0x3 line.long 0x0 "pixeng_layerblend2cfg_layerblend2_Dynamic,Dynamic pixel engine configuration for layerblend2" bitfld.long 0x0 24.--25. "pixeng_layerblend2cfg_layerblend2_clken,Enable of layerblend2 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_layerblend2cfg_layerblend2_sec_sel,Selection of the source for the sec input of the layerblend2 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_layerblend2cfg_layerblend2_prim_sel,Selection of the source for the prim input of the layerblend2 module" rgroup.long 0x18100C++0x3 line.long 0x0 "pixeng_layerblend2cfg_layerblend2_Status,Status information for pixel engine configuration of layerblend2" bitfld.long 0x0 16.--18. "pixeng_layerblend2cfg_layerblend2_sel,Status of the connection of the layerblend2 module" "0,1,2,3,4,5,6,7" wgroup.long 0x190000++0x3 line.long 0x0 "pixeng_layerblend3_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend3_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x190004++0x3 line.long 0x0 "pixeng_layerblend3_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend3_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend3_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend3_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x190008++0xF line.long 0x0 "pixeng_layerblend3_StaticControl,Static control settings." bitfld.long 0x0 3.--4. "pixeng_layerblend3_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3" newline bitfld.long 0x0 1.--2. "pixeng_layerblend3_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3" newline bitfld.long 0x0 0. "pixeng_layerblend3_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" line.long 0x4 "pixeng_layerblend3_Control,Common control settings." hexmask.long.byte 0x4 22.--25. 1. "pixeng_layerblend3_SecOddRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is odd." newline hexmask.long.byte 0x4 18.--21. 1. "pixeng_layerblend3_SecOddRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is odd and column index is even." newline hexmask.long.byte 0x4 14.--17. 1. "pixeng_layerblend3_SecEvenRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is even and column index is odd." newline hexmask.long.byte 0x4 10.--13. 1. "pixeng_layerblend3_SecEvenRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is even." newline bitfld.long 0x4 9. "pixeng_layerblend3_SecReplicateEn,Enables horizontal replication of pixels by factor 2 on secondary input port." "0,1" newline bitfld.long 0x4 8. "pixeng_layerblend3_SecLowPassEn,Enables a horizontal low-pass filter for the secondary input port." "0,1" newline bitfld.long 0x4 4.--6. "pixeng_layerblend3_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2. "pixeng_layerblend3_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" newline bitfld.long 0x4 0. "pixeng_layerblend3_MODE,Operation mode." "0,1" line.long 0x8 "pixeng_layerblend3_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "pixeng_layerblend3_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "pixeng_layerblend3_SEC_A_BLD_FUNC,Secondary (overlay) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_layerblend3_PRIM_A_BLD_FUNC,Primary (background) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "pixeng_layerblend3_SEC_C_BLD_FUNC,Secondary (overlay) input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "pixeng_layerblend3_PRIM_C_BLD_FUNC,Primary (background) input color blending function" "0,1,2,3,4,5,6,7" line.long 0xC "pixeng_layerblend3_Position,Position of secondary (overlay) input frame" hexmask.long.word 0xC 16.--31. 1. "pixeng_layerblend3_YPOS,vertical position first pixel is at 0 format s15 (twos complement)" newline hexmask.long.word 0xC 0.--15. 1. "pixeng_layerblend3_XPOS,horizontal position first pixel is at 0 format s15 (twos complement)" rgroup.long 0x190018++0x7 line.long 0x0 "pixeng_layerblend3_PrimControlWord,Value of last received primary (background) control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_layerblend3_P_VAL,Value of last received control word" line.long 0x4 "pixeng_layerblend3_SecControlWord,Value of last received secondary (overlay) control word. for debugging" hexmask.long 0x4 0.--31. 1. "pixeng_layerblend3_S_VAL,Value of last received control word" wgroup.long 0x191000++0x3 line.long 0x0 "pixeng_layerblend3cfg_layerblend3_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend3cfg_layerblend3_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x191004++0x3 line.long 0x0 "pixeng_layerblend3cfg_layerblend3_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend3cfg_layerblend3_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend3cfg_layerblend3_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend3cfg_layerblend3_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x191008++0x3 line.long 0x0 "pixeng_layerblend3cfg_layerblend3_Dynamic,Dynamic pixel engine configuration for layerblend3" bitfld.long 0x0 24.--25. "pixeng_layerblend3cfg_layerblend3_clken,Enable of layerblend3 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_layerblend3cfg_layerblend3_sec_sel,Selection of the source for the sec input of the layerblend3 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_layerblend3cfg_layerblend3_prim_sel,Selection of the source for the prim input of the layerblend3 module" rgroup.long 0x19100C++0x3 line.long 0x0 "pixeng_layerblend3cfg_layerblend3_Status,Status information for pixel engine configuration of layerblend3" bitfld.long 0x0 16.--18. "pixeng_layerblend3cfg_layerblend3_sel,Status of the connection of the layerblend3 module" "0,1,2,3,4,5,6,7" wgroup.long 0x1A0000++0x3 line.long 0x0 "pixeng_layerblend4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1A0004++0x3 line.long 0x0 "pixeng_layerblend4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1A0008++0xF line.long 0x0 "pixeng_layerblend4_StaticControl,Static control settings." bitfld.long 0x0 3.--4. "pixeng_layerblend4_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3" newline bitfld.long 0x0 1.--2. "pixeng_layerblend4_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3" newline bitfld.long 0x0 0. "pixeng_layerblend4_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" line.long 0x4 "pixeng_layerblend4_Control,Common control settings." hexmask.long.byte 0x4 22.--25. 1. "pixeng_layerblend4_SecOddRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is odd." newline hexmask.long.byte 0x4 18.--21. 1. "pixeng_layerblend4_SecOddRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is odd and column index is even." newline hexmask.long.byte 0x4 14.--17. 1. "pixeng_layerblend4_SecEvenRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is even and column index is odd." newline hexmask.long.byte 0x4 10.--13. 1. "pixeng_layerblend4_SecEvenRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is even." newline bitfld.long 0x4 9. "pixeng_layerblend4_SecReplicateEn,Enables horizontal replication of pixels by factor 2 on secondary input port." "0,1" newline bitfld.long 0x4 8. "pixeng_layerblend4_SecLowPassEn,Enables a horizontal low-pass filter for the secondary input port." "0,1" newline bitfld.long 0x4 4.--6. "pixeng_layerblend4_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2. "pixeng_layerblend4_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" newline bitfld.long 0x4 0. "pixeng_layerblend4_MODE,Operation mode." "0,1" line.long 0x8 "pixeng_layerblend4_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "pixeng_layerblend4_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "pixeng_layerblend4_SEC_A_BLD_FUNC,Secondary (overlay) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_layerblend4_PRIM_A_BLD_FUNC,Primary (background) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "pixeng_layerblend4_SEC_C_BLD_FUNC,Secondary (overlay) input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "pixeng_layerblend4_PRIM_C_BLD_FUNC,Primary (background) input color blending function" "0,1,2,3,4,5,6,7" line.long 0xC "pixeng_layerblend4_Position,Position of secondary (overlay) input frame" hexmask.long.word 0xC 16.--31. 1. "pixeng_layerblend4_YPOS,vertical position first pixel is at 0 format s15 (twos complement)" newline hexmask.long.word 0xC 0.--15. 1. "pixeng_layerblend4_XPOS,horizontal position first pixel is at 0 format s15 (twos complement)" rgroup.long 0x1A0018++0x7 line.long 0x0 "pixeng_layerblend4_PrimControlWord,Value of last received primary (background) control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_layerblend4_P_VAL,Value of last received control word" line.long 0x4 "pixeng_layerblend4_SecControlWord,Value of last received secondary (overlay) control word. for debugging" hexmask.long 0x4 0.--31. 1. "pixeng_layerblend4_S_VAL,Value of last received control word" wgroup.long 0x1A1000++0x3 line.long 0x0 "pixeng_layerblend4cfg_layerblend4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend4cfg_layerblend4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1A1004++0x3 line.long 0x0 "pixeng_layerblend4cfg_layerblend4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend4cfg_layerblend4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend4cfg_layerblend4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend4cfg_layerblend4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1A1008++0x3 line.long 0x0 "pixeng_layerblend4cfg_layerblend4_Dynamic,Dynamic pixel engine configuration for layerblend4" bitfld.long 0x0 24.--25. "pixeng_layerblend4cfg_layerblend4_clken,Enable of layerblend4 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_layerblend4cfg_layerblend4_sec_sel,Selection of the source for the sec input of the layerblend4 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_layerblend4cfg_layerblend4_prim_sel,Selection of the source for the prim input of the layerblend4 module" rgroup.long 0x1A100C++0x3 line.long 0x0 "pixeng_layerblend4cfg_layerblend4_Status,Status information for pixel engine configuration of layerblend4" bitfld.long 0x0 16.--18. "pixeng_layerblend4cfg_layerblend4_sel,Status of the connection of the layerblend4 module" "0,1,2,3,4,5,6,7" wgroup.long 0x1B0000++0x3 line.long 0x0 "pixeng_layerblend5_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend5_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1B0004++0x3 line.long 0x0 "pixeng_layerblend5_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend5_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend5_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend5_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1B0008++0xF line.long 0x0 "pixeng_layerblend5_StaticControl,Static control settings." bitfld.long 0x0 3.--4. "pixeng_layerblend5_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3" newline bitfld.long 0x0 1.--2. "pixeng_layerblend5_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3" newline bitfld.long 0x0 0. "pixeng_layerblend5_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" line.long 0x4 "pixeng_layerblend5_Control,Common control settings." hexmask.long.byte 0x4 22.--25. 1. "pixeng_layerblend5_SecOddRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is odd." newline hexmask.long.byte 0x4 18.--21. 1. "pixeng_layerblend5_SecOddRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is odd and column index is even." newline hexmask.long.byte 0x4 14.--17. 1. "pixeng_layerblend5_SecEvenRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is even and column index is odd." newline hexmask.long.byte 0x4 10.--13. 1. "pixeng_layerblend5_SecEvenRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is even." newline bitfld.long 0x4 9. "pixeng_layerblend5_SecReplicateEn,Enables horizontal replication of pixels by factor 2 on secondary input port." "0,1" newline bitfld.long 0x4 8. "pixeng_layerblend5_SecLowPassEn,Enables a horizontal low-pass filter for the secondary input port." "0,1" newline bitfld.long 0x4 4.--6. "pixeng_layerblend5_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2. "pixeng_layerblend5_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" newline bitfld.long 0x4 0. "pixeng_layerblend5_MODE,Operation mode." "0,1" line.long 0x8 "pixeng_layerblend5_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "pixeng_layerblend5_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "pixeng_layerblend5_SEC_A_BLD_FUNC,Secondary (overlay) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_layerblend5_PRIM_A_BLD_FUNC,Primary (background) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "pixeng_layerblend5_SEC_C_BLD_FUNC,Secondary (overlay) input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "pixeng_layerblend5_PRIM_C_BLD_FUNC,Primary (background) input color blending function" "0,1,2,3,4,5,6,7" line.long 0xC "pixeng_layerblend5_Position,Position of secondary (overlay) input frame" hexmask.long.word 0xC 16.--31. 1. "pixeng_layerblend5_YPOS,vertical position first pixel is at 0 format s15 (twos complement)" newline hexmask.long.word 0xC 0.--15. 1. "pixeng_layerblend5_XPOS,horizontal position first pixel is at 0 format s15 (twos complement)" rgroup.long 0x1B0018++0x7 line.long 0x0 "pixeng_layerblend5_PrimControlWord,Value of last received primary (background) control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_layerblend5_P_VAL,Value of last received control word" line.long 0x4 "pixeng_layerblend5_SecControlWord,Value of last received secondary (overlay) control word. for debugging" hexmask.long 0x4 0.--31. 1. "pixeng_layerblend5_S_VAL,Value of last received control word" wgroup.long 0x1B1000++0x3 line.long 0x0 "pixeng_layerblend5cfg_layerblend5_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend5cfg_layerblend5_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1B1004++0x3 line.long 0x0 "pixeng_layerblend5cfg_layerblend5_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend5cfg_layerblend5_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend5cfg_layerblend5_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend5cfg_layerblend5_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1B1008++0x3 line.long 0x0 "pixeng_layerblend5cfg_layerblend5_Dynamic,Dynamic pixel engine configuration for layerblend5" bitfld.long 0x0 24.--25. "pixeng_layerblend5cfg_layerblend5_clken,Enable of layerblend5 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_layerblend5cfg_layerblend5_sec_sel,Selection of the source for the sec input of the layerblend5 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_layerblend5cfg_layerblend5_prim_sel,Selection of the source for the prim input of the layerblend5 module" rgroup.long 0x1B100C++0x3 line.long 0x0 "pixeng_layerblend5cfg_layerblend5_Status,Status information for pixel engine configuration of layerblend5" bitfld.long 0x0 16.--18. "pixeng_layerblend5cfg_layerblend5_sel,Status of the connection of the layerblend5 module" "0,1,2,3,4,5,6,7" wgroup.long 0x1C0000++0x3 line.long 0x0 "pixeng_layerblend6_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend6_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1C0004++0x3 line.long 0x0 "pixeng_layerblend6_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend6_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend6_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend6_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1C0008++0xF line.long 0x0 "pixeng_layerblend6_StaticControl,Static control settings." bitfld.long 0x0 3.--4. "pixeng_layerblend6_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3" newline bitfld.long 0x0 1.--2. "pixeng_layerblend6_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3" newline bitfld.long 0x0 0. "pixeng_layerblend6_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" line.long 0x4 "pixeng_layerblend6_Control,Common control settings." hexmask.long.byte 0x4 22.--25. 1. "pixeng_layerblend6_SecOddRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is odd." newline hexmask.long.byte 0x4 18.--21. 1. "pixeng_layerblend6_SecOddRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is odd and column index is even." newline hexmask.long.byte 0x4 14.--17. 1. "pixeng_layerblend6_SecEvenRowOddColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row index is even and column index is odd." newline hexmask.long.byte 0x4 10.--13. 1. "pixeng_layerblend6_SecEvenRowEvenColDis,Disable bits for R/Y G/U B/V and A channels of secondary input when row and column index is even." newline bitfld.long 0x4 9. "pixeng_layerblend6_SecReplicateEn,Enables horizontal replication of pixels by factor 2 on secondary input port." "0,1" newline bitfld.long 0x4 8. "pixeng_layerblend6_SecLowPassEn,Enables a horizontal low-pass filter for the secondary input port." "0,1" newline bitfld.long 0x4 4.--6. "pixeng_layerblend6_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2. "pixeng_layerblend6_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" newline bitfld.long 0x4 0. "pixeng_layerblend6_MODE,Operation mode." "0,1" line.long 0x8 "pixeng_layerblend6_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "pixeng_layerblend6_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "pixeng_layerblend6_SEC_A_BLD_FUNC,Secondary (overlay) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "pixeng_layerblend6_PRIM_A_BLD_FUNC,Primary (background) input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "pixeng_layerblend6_SEC_C_BLD_FUNC,Secondary (overlay) input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "pixeng_layerblend6_PRIM_C_BLD_FUNC,Primary (background) input color blending function" "0,1,2,3,4,5,6,7" line.long 0xC "pixeng_layerblend6_Position,Position of secondary (overlay) input frame" hexmask.long.word 0xC 16.--31. 1. "pixeng_layerblend6_YPOS,vertical position first pixel is at 0 format s15 (twos complement)" newline hexmask.long.word 0xC 0.--15. 1. "pixeng_layerblend6_XPOS,horizontal position first pixel is at 0 format s15 (twos complement)" rgroup.long 0x1C0018++0x7 line.long 0x0 "pixeng_layerblend6_PrimControlWord,Value of last received primary (background) control word. for debugging" hexmask.long 0x0 0.--31. 1. "pixeng_layerblend6_P_VAL,Value of last received control word" line.long 0x4 "pixeng_layerblend6_SecControlWord,Value of last received secondary (overlay) control word. for debugging" hexmask.long 0x4 0.--31. 1. "pixeng_layerblend6_S_VAL,Value of last received control word" wgroup.long 0x1C1000++0x3 line.long 0x0 "pixeng_layerblend6cfg_layerblend6_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_layerblend6cfg_layerblend6_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1C1004++0x3 line.long 0x0 "pixeng_layerblend6cfg_layerblend6_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_layerblend6cfg_layerblend6_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_layerblend6cfg_layerblend6_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_layerblend6cfg_layerblend6_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1C1008++0x3 line.long 0x0 "pixeng_layerblend6cfg_layerblend6_Dynamic,Dynamic pixel engine configuration for layerblend6" bitfld.long 0x0 24.--25. "pixeng_layerblend6cfg_layerblend6_clken,Enable of layerblend6 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 8.--13. 1. "pixeng_layerblend6cfg_layerblend6_sec_sel,Selection of the source for the sec input of the layerblend6 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_layerblend6cfg_layerblend6_prim_sel,Selection of the source for the prim input of the layerblend6 module" rgroup.long 0x1C100C++0x3 line.long 0x0 "pixeng_layerblend6cfg_layerblend6_Status,Status information for pixel engine configuration of layerblend6" bitfld.long 0x0 16.--18. "pixeng_layerblend6cfg_layerblend6_sel,Status of the connection of the layerblend6 module" "0,1,2,3,4,5,6,7" wgroup.long 0x1D0000++0x3 line.long 0x0 "pixeng_fetchlayer0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1D0004++0x3 line.long 0x0 "pixeng_fetchlayer0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchlayer0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchlayer0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchlayer0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1D0008++0xB line.long 0x0 "pixeng_fetchlayer0_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchlayer0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchlayer0_ShdLdReqControl,Shadow load request flags for each layer." bitfld.long 0x4 7. "pixeng_fetchlayer0_ShdLdReqSticky7,Shadow load request flags for layer7 (always load)." "0,1" newline bitfld.long 0x4 6. "pixeng_fetchlayer0_ShdLdReqSticky6,Shadow load request flags for layer6 (always load)." "0,1" newline bitfld.long 0x4 5. "pixeng_fetchlayer0_ShdLdReqSticky5,Shadow load request flags for layer5 (always load)." "0,1" newline bitfld.long 0x4 4. "pixeng_fetchlayer0_ShdLdReqSticky4,Shadow load request flags for layer4 (always load)." "0,1" newline bitfld.long 0x4 3. "pixeng_fetchlayer0_ShdLdReqSticky3,Shadow load request flags for layer3 (always load)." "0,1" newline bitfld.long 0x4 2. "pixeng_fetchlayer0_ShdLdReqSticky2,Shadow load request flags for layer2 (always load)." "0,1" newline bitfld.long 0x4 1. "pixeng_fetchlayer0_ShdLdReqSticky1,Shadow load request flags for layer1 (always load)." "0,1" newline bitfld.long 0x4 0. "pixeng_fetchlayer0_ShdLdReqSticky0,Shadow load request flags for layer0 (always load)." "0,1" line.long 0x8 "pixeng_fetchlayer0_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x8 30. "pixeng_fetchlayer0_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x8 29. "pixeng_fetchlayer0_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x8 21.--28. 1. "pixeng_fetchlayer0_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x8 13.--20. 1. "pixeng_fetchlayer0_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x8 8.--12. 1. "pixeng_fetchlayer0_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchlayer0_SetNumBuffers,Set this to the number of bursts that should be buffered." group.long 0x1D0018++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable0,Enables (value = 1) a color palette with 8 bits input and 24 bits output." "0,1" group.long 0x1D0050++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress1,Source buffer base address of layer 1." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress1,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB1,Source buffer base address of layer 1." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB1,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress1,Source buffer base address of layer 1." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress1,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB1,Source buffer base address of layer 1." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB1,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes1,Source buffer attributes for layer 1." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap1,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate1,Enable flag for continuous shadow load of AutoUpdateBaseAddress1." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel1,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride1,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension1,Source buffer dimensions of layer 1." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount1,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth1,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits1,Size of color components for RGB. YUV and index formats (layer 1)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat1,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed1,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen1,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue1,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha1,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift1,Bit position of color components for RGB. YUV and index formats (layer 1)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed1,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen1,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue1,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha1,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset1,Position of layer 1 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset1,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset1,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset1,Clip window position for layer 1." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset1,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset1,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions1,Clip window size for layer 1." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight1,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth1,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor1,Constant color for layer 1." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed1,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen1,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue1,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha1,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty1,Common properties of layer 1." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable1,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable1,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable1,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode1,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB1,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable1,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable1,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable1,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable1,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable1,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable1,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode1,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable1,See PaletteEnable0." "0,1" group.long 0x1D0088++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress2,Source buffer base address of layer 2." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress2,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB2,Source buffer base address of layer 2." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB2,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress2,Source buffer base address of layer 2." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress2,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB2,Source buffer base address of layer 2." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB2,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes2,Source buffer attributes for layer 2." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap2,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate2,Enable flag for continuous shadow load of AutoUpdateBaseAddress2." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel2,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride2,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension2,Source buffer dimensions of layer 2." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount2,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth2,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits2,Size of color components for RGB. YUV and index formats (layer 2)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat2,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed2,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen2,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue2,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha2,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift2,Bit position of color components for RGB. YUV and index formats (layer 2)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed2,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen2,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue2,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha2,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset2,Position of layer 2 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset2,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset2,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset2,Clip window position for layer 2." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset2,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset2,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions2,Clip window size for layer 2." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight2,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth2,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor2,Constant color for layer 2." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed2,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen2,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue2,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha2,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty2,Common properties of layer 2." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable2,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable2,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable2,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode2,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB2,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable2,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable2,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable2,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable2,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable2,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable2,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode2,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable2,See PaletteEnable0." "0,1" group.long 0x1D00C0++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress3,Source buffer base address of layer 3." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress3,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB3,Source buffer base address of layer 3." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB3,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress3,Source buffer base address of layer 3." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress3,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB3,Source buffer base address of layer 3." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB3,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes3,Source buffer attributes for layer 3." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap3,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate3,Enable flag for continuous shadow load of AutoUpdateBaseAddress3." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel3,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride3,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension3,Source buffer dimensions of layer 3." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount3,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth3,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits3,Size of color components for RGB. YUV and index formats (layer 3)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat3,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed3,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen3,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue3,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha3,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift3,Bit position of color components for RGB. YUV and index formats (layer 3)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed3,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen3,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue3,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha3,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset3,Position of layer 3 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset3,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset3,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset3,Clip window position for layer 3." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset3,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset3,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions3,Clip window size for layer 3." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight3,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth3,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor3,Constant color for layer 3." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed3,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen3,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue3,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha3,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty3,Common properties of layer 3." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable3,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable3,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable3,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode3,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB3,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable3,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable3,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable3,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable3,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable3,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable3,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode3,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable3,See PaletteEnable0." "0,1" group.long 0x1D00F8++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress4,Source buffer base address of layer 4." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress4,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB4,Source buffer base address of layer 4." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB4,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress4,Source buffer base address of layer 4." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress4,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB4,Source buffer base address of layer 4." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB4,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes4,Source buffer attributes for layer 4." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap4,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate4,Enable flag for continuous shadow load of AutoUpdateBaseAddress4." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel4,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride4,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension4,Source buffer dimensions of layer 4." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount4,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth4,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits4,Size of color components for RGB. YUV and index formats (layer 4)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat4,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed4,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen4,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue4,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha4,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift4,Bit position of color components for RGB. YUV and index formats (layer 4)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed4,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen4,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue4,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha4,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset4,Position of layer 4 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset4,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset4,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset4,Clip window position for layer 4." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset4,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset4,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions4,Clip window size for layer 4." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight4,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth4,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor4,Constant color for layer 4." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed4,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen4,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue4,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha4,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty4,Common properties of layer 4." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable4,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable4,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable4,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode4,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB4,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable4,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable4,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable4,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable4,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable4,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable4,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode4,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable4,See PaletteEnable0." "0,1" group.long 0x1D0130++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress5,Source buffer base address of layer 5." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress5,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB5,Source buffer base address of layer 5." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB5,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress5,Source buffer base address of layer 5." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress5,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB5,Source buffer base address of layer 5." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB5,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes5,Source buffer attributes for layer 5." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap5,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate5,Enable flag for continuous shadow load of AutoUpdateBaseAddress5." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel5,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride5,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension5,Source buffer dimensions of layer 5." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount5,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth5,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits5,Size of color components for RGB. YUV and index formats (layer 5)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat5,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed5,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen5,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue5,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha5,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift5,Bit position of color components for RGB. YUV and index formats (layer 5)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed5,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen5,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue5,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha5,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset5,Position of layer 5 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset5,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset5,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset5,Clip window position for layer 5." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset5,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset5,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions5,Clip window size for layer 5." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight5,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth5,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor5,Constant color for layer 5." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed5,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen5,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue5,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha5,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty5,Common properties of layer 5." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable5,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable5,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable5,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode5,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB5,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable5,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable5,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable5,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable5,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable5,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable5,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode5,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable5,See PaletteEnable0." "0,1" group.long 0x1D0168++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress6,Source buffer base address of layer 6." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress6,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB6,Source buffer base address of layer 6." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB6,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress6,Source buffer base address of layer 6." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress6,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB6,Source buffer base address of layer 6." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB6,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes6,Source buffer attributes for layer 6." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap6,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate6,Enable flag for continuous shadow load of AutoUpdateBaseAddress6." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel6,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride6,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension6,Source buffer dimensions of layer 6." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount6,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth6,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits6,Size of color components for RGB. YUV and index formats (layer 6)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat6,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed6,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen6,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue6,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha6,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift6,Bit position of color components for RGB. YUV and index formats (layer 6)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed6,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen6,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue6,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha6,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset6,Position of layer 6 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset6,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset6,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset6,Clip window position for layer 6." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset6,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset6,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions6,Clip window size for layer 6." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight6,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth6,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor6,Constant color for layer 6." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed6,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen6,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue6,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha6,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty6,Common properties of layer 6." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable6,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable6,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable6,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode6,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB6,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable6,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable6,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable6,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable6,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable6,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable6,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode6,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable6,See PaletteEnable0." "0,1" group.long 0x1D01A0++0x33 line.long 0x0 "pixeng_fetchlayer0_BaseAddress7,Source buffer base address of layer 7." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_BaseAddress7,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer0_BaseAddressMSB7,Source buffer base address of layer 7." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_BaseAddressMSB7,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer0_AutoUpdateBaseAddress7,Source buffer base address of layer 7." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddress7,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB7,Source buffer base address of layer 7." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_AutoUpdateBaseAddressMSB7,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer0_SourceBufferAttributes7,Source buffer attributes for layer 7." bitfld.long 0x10 31. "pixeng_fetchlayer0_DWordByteSwap7,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer0_BaseAddressAutoUpdate7,Enable flag for continuous shadow load of AutoUpdateBaseAddress7." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer0_BitsPerPixel7,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer0_Stride7,See Stride0." line.long 0x14 "pixeng_fetchlayer0_SourceBufferDimension7,Source buffer dimensions of layer 7." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer0_LineCount7,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer0_LineWidth7,See LineWidth0." line.long 0x18 "pixeng_fetchlayer0_ColorComponentBits7,Size of color components for RGB. YUV and index formats (layer 7)." bitfld.long 0x18 31. "pixeng_fetchlayer0_ITUFormat7,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer0_ComponentBitsRed7,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer0_ComponentBitsGreen7,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer0_ComponentBitsBlue7,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer0_ComponentBitsAlpha7,Alpha." line.long 0x1C "pixeng_fetchlayer0_ColorComponentShift7,Bit position of color components for RGB. YUV and index formats (layer 7)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer0_ComponentShiftRed7,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer0_ComponentShiftGreen7,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer0_ComponentShiftBlue7,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer0_ComponentShiftAlpha7,Alpha." line.long 0x20 "pixeng_fetchlayer0_LayerOffset7,Position of layer 7 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer0_LayerYOffset7,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer0_LayerXOffset7,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer0_ClipWindowOffset7,Clip window position for layer 7." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer0_ClipWindowYOffset7,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer0_ClipWindowXOffset7,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer0_ClipWindowDimensions7,Clip window size for layer 7." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer0_ClipWindowHeight7,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer0_ClipWindowWidth7,Width." line.long 0x2C "pixeng_fetchlayer0_ConstantColor7,Constant color for layer 7." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer0_ConstantRed7,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer0_ConstantGreen7,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer0_ConstantBlue7,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_ConstantAlpha7,Alpha." line.long 0x30 "pixeng_fetchlayer0_LayerProperty7,Common properties of layer 7." bitfld.long 0x30 31. "pixeng_fetchlayer0_SourceBufferEnable7,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer0_ClipWindowEnable7,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer0_GammaRemoveEnable7,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer0_YUVConversionMode7,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer0_PremulConstRGB7,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer0_RGBAlphaTransEnable7,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer0_RGBAlphaConstEnable7,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer0_RGBAlphaSrcEnable7,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer0_AlphaTransEnable7,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer0_AlphaConstEnable7,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer0_AlphaSrcEnable7,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer0_TileMode7,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer0_PaletteEnable7,See PaletteEnable0." "0,1" group.long 0x1D01D8++0xF line.long 0x0 "pixeng_fetchlayer0_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchlayer0_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchlayer0_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchlayer0_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchlayer0_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchlayer0_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchlayer0_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchlayer0_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchlayer0_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchlayer0_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchlayer0_Control,Shared common control settings for all layers." hexmask.long.byte 0x8 17.--20. 1. "pixeng_fetchlayer0_ClipLayer,Index of the layer which is used to fill the clipping area of the frame layout when ClipColor is set to LAYER." newline bitfld.long 0x8 16. "pixeng_fetchlayer0_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 8.--10. "pixeng_fetchlayer0_PaletteIdxWidth,Number minus one of least significant bits of pixel data read from the source buffer that are used as index value for color palette look-up." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 7. "pixeng_fetchlayer0_RawPixel,Raw pixel mode." "0,1" line.long 0xC "pixeng_fetchlayer0_TriggerEnable,Shadow load enable flags for all layers." bitfld.long 0xC 7. "pixeng_fetchlayer0_ShdLdReq7,Shadow load request flags for layer7 (one time load)." "0,1" newline bitfld.long 0xC 6. "pixeng_fetchlayer0_ShdLdReq6,Shadow load request flags for layer6 (one time load)." "0,1" newline bitfld.long 0xC 5. "pixeng_fetchlayer0_ShdLdReq5,Shadow load request flags for layer5 (one time load)." "0,1" newline bitfld.long 0xC 4. "pixeng_fetchlayer0_ShdLdReq4,Shadow load request flags for layer4 (one time load)." "0,1" newline bitfld.long 0xC 3. "pixeng_fetchlayer0_ShdLdReq3,Shadow load request flags for layer3 (one time load)." "0,1" newline bitfld.long 0xC 2. "pixeng_fetchlayer0_ShdLdReq2,Shadow load request flags for layer2 (one time load)." "0,1" newline bitfld.long 0xC 1. "pixeng_fetchlayer0_ShdLdReq1,Shadow load request flags for layer1 (one time load)." "0,1" newline bitfld.long 0xC 0. "pixeng_fetchlayer0_ShdLdReq0,Shadow load request flags for layer0 (one time load)." "0,1" wgroup.long 0x1D01E8++0x7 line.long 0x0 "pixeng_fetchlayer0_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchlayer0_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchlayer0_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchlayer0_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x1D01F0++0x3 line.long 0x0 "pixeng_fetchlayer0_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchlayer0_FetchType,This field can be used to determine what kind of fetch unit this is." rgroup.long 0x1D01F8++0x3 line.long 0x0 "pixeng_fetchlayer0_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x0 8.--12. 1. "pixeng_fetchlayer0_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x0 0.--7. 1. "pixeng_fetchlayer0_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x1D01FC++0x3 line.long 0x0 "pixeng_fetchlayer0_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchlayer0_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchlayer0_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x1D0200++0x43 line.long 0x0 "pixeng_fetchlayer0_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchlayer0_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchlayer0_CurBaseAddress1,Source buffer base address of layer 1." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress1,Current Working BaseAddress for layer 1." line.long 0xC "pixeng_fetchlayer0_CurBaseAddressMSB1,MSB bits of Current Working BaseAddress for layer 1." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB1,MSB bits of Current Working BaseAddress for layer 1." line.long 0x10 "pixeng_fetchlayer0_CurBaseAddress2,Source buffer base address of layer 2." hexmask.long 0x10 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress2,Current Working BaseAddress for layer 2." line.long 0x14 "pixeng_fetchlayer0_CurBaseAddressMSB2,MSB bits of Current Working BaseAddress for layer 2." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB2,MSB bits of Current Working BaseAddress for layer 2." line.long 0x18 "pixeng_fetchlayer0_CurBaseAddress3,Source buffer base address of layer 3." hexmask.long 0x18 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress3,Current Working BaseAddress for layer 3." line.long 0x1C "pixeng_fetchlayer0_CurBaseAddressMSB3,MSB bits of Current Working BaseAddress for layer 3." hexmask.long.byte 0x1C 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB3,MSB bits of Current Working BaseAddress for layer 3." line.long 0x20 "pixeng_fetchlayer0_CurBaseAddress4,Source buffer base address of layer 4." hexmask.long 0x20 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress4,Current Working BaseAddress for layer 4." line.long 0x24 "pixeng_fetchlayer0_CurBaseAddressMSB4,MSB bits of Current Working BaseAddress for layer 4." hexmask.long.byte 0x24 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB4,MSB bits of Current Working BaseAddress for layer 4." line.long 0x28 "pixeng_fetchlayer0_CurBaseAddress5,Source buffer base address of layer 5." hexmask.long 0x28 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress5,Current Working BaseAddress for layer 5." line.long 0x2C "pixeng_fetchlayer0_CurBaseAddressMSB5,MSB bits of Current Working BaseAddress for layer 5." hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB5,MSB bits of Current Working BaseAddress for layer 5." line.long 0x30 "pixeng_fetchlayer0_CurBaseAddress6,Source buffer base address of layer 6." hexmask.long 0x30 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress6,Current Working BaseAddress for layer 6." line.long 0x34 "pixeng_fetchlayer0_CurBaseAddressMSB6,MSB bits of Current Working BaseAddress for layer 6." hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB6,MSB bits of Current Working BaseAddress for layer 6." line.long 0x38 "pixeng_fetchlayer0_CurBaseAddress7,Source buffer base address of layer 7." hexmask.long 0x38 0.--31. 1. "pixeng_fetchlayer0_CurBaseAddress7,Current Working BaseAddress for layer 7." line.long 0x3C "pixeng_fetchlayer0_CurBaseAddressMSB7,MSB bits of Current Working BaseAddress for layer 7." hexmask.long.byte 0x3C 0.--7. 1. "pixeng_fetchlayer0_CurBaseAddressMSB7,MSB bits of Current Working BaseAddress for layer 7." line.long 0x40 "pixeng_fetchlayer0_HiddenStatus,Hidden status informations." bitfld.long 0x40 15. "pixeng_fetchlayer0_ShadowStatus7,Shadow load status for layer7." "0,1" newline bitfld.long 0x40 14. "pixeng_fetchlayer0_ShadowStatus6,Shadow load status for layer6." "0,1" newline bitfld.long 0x40 13. "pixeng_fetchlayer0_ShadowStatus5,Shadow load status for layer5." "0,1" newline bitfld.long 0x40 12. "pixeng_fetchlayer0_ShadowStatus4,Shadow load status for layer4." "0,1" newline bitfld.long 0x40 11. "pixeng_fetchlayer0_ShadowStatus3,Shadow load status for layer3." "0,1" newline bitfld.long 0x40 10. "pixeng_fetchlayer0_ShadowStatus2,Shadow load status for layer2." "0,1" newline bitfld.long 0x40 9. "pixeng_fetchlayer0_ShadowStatus1,Shadow load status for layer1." "0,1" newline bitfld.long 0x40 8. "pixeng_fetchlayer0_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x40 6. "pixeng_fetchlayer0_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x40 5. "pixeng_fetchlayer0_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x40 4. "pixeng_fetchlayer0_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x40 0. "pixeng_fetchlayer0_StatusBusy,Fetch unit is busy." "0,1" group.long 0x1D0400++0x3 line.long 0x0 "pixeng_fetchlayer0_ColorPalette,Color palette look up table." hexmask.long.tbyte 0x0 0.--23. 1. "pixeng_fetchlayer0_ColorPalette,Entry of the color palette look-up table" wgroup.long 0x1D1000++0x3 line.long 0x0 "pixeng_fetchlayer0cfg_fetchlayer0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer0cfg_fetchlayer0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1D1004++0x7 line.long 0x0 "pixeng_fetchlayer0cfg_fetchlayer0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchlayer0cfg_fetchlayer0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchlayer0cfg_fetchlayer0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchlayer0cfg_fetchlayer0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_fetchlayer0cfg_fetchlayer0_Status,Status information for pixel engine configuration of fetchlayer0" bitfld.long 0x4 16.--18. "pixeng_fetchlayer0cfg_fetchlayer0_sel,Status of the connection of the fetchlayer0 module" "0,1,2,3,4,5,6,7" wgroup.long 0x1E0000++0x3 line.long 0x0 "pixeng_fetchlayer1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1E0004++0x3 line.long 0x0 "pixeng_fetchlayer1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchlayer1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchlayer1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchlayer1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1E0008++0xB line.long 0x0 "pixeng_fetchlayer1_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchlayer1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchlayer1_ShdLdReqControl,Shadow load request flags for each layer." bitfld.long 0x4 7. "pixeng_fetchlayer1_ShdLdReqSticky7,Shadow load request flags for layer7 (always load)." "0,1" newline bitfld.long 0x4 6. "pixeng_fetchlayer1_ShdLdReqSticky6,Shadow load request flags for layer6 (always load)." "0,1" newline bitfld.long 0x4 5. "pixeng_fetchlayer1_ShdLdReqSticky5,Shadow load request flags for layer5 (always load)." "0,1" newline bitfld.long 0x4 4. "pixeng_fetchlayer1_ShdLdReqSticky4,Shadow load request flags for layer4 (always load)." "0,1" newline bitfld.long 0x4 3. "pixeng_fetchlayer1_ShdLdReqSticky3,Shadow load request flags for layer3 (always load)." "0,1" newline bitfld.long 0x4 2. "pixeng_fetchlayer1_ShdLdReqSticky2,Shadow load request flags for layer2 (always load)." "0,1" newline bitfld.long 0x4 1. "pixeng_fetchlayer1_ShdLdReqSticky1,Shadow load request flags for layer1 (always load)." "0,1" newline bitfld.long 0x4 0. "pixeng_fetchlayer1_ShdLdReqSticky0,Shadow load request flags for layer0 (always load)." "0,1" line.long 0x8 "pixeng_fetchlayer1_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x8 30. "pixeng_fetchlayer1_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x8 29. "pixeng_fetchlayer1_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x8 21.--28. 1. "pixeng_fetchlayer1_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x8 13.--20. 1. "pixeng_fetchlayer1_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x8 8.--12. 1. "pixeng_fetchlayer1_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchlayer1_SetNumBuffers,Set this to the number of bursts that should be buffered." group.long 0x1E0018++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable0,Enables (value = 1) a color palette with 8 bits input and 24 bits output." "0,1" group.long 0x1E0050++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress1,Source buffer base address of layer 1." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress1,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB1,Source buffer base address of layer 1." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB1,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress1,Source buffer base address of layer 1." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress1,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB1,Source buffer base address of layer 1." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB1,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes1,Source buffer attributes for layer 1." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap1,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate1,Enable flag for continuous shadow load of AutoUpdateBaseAddress1." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel1,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride1,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension1,Source buffer dimensions of layer 1." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount1,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth1,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits1,Size of color components for RGB. YUV and index formats (layer 1)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat1,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed1,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen1,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue1,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha1,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift1,Bit position of color components for RGB. YUV and index formats (layer 1)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed1,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen1,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue1,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha1,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset1,Position of layer 1 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset1,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset1,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset1,Clip window position for layer 1." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset1,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset1,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions1,Clip window size for layer 1." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight1,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth1,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor1,Constant color for layer 1." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed1,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen1,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue1,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha1,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty1,Common properties of layer 1." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable1,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable1,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable1,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode1,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB1,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable1,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable1,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable1,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable1,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable1,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable1,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode1,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable1,See PaletteEnable0." "0,1" group.long 0x1E0088++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress2,Source buffer base address of layer 2." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress2,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB2,Source buffer base address of layer 2." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB2,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress2,Source buffer base address of layer 2." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress2,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB2,Source buffer base address of layer 2." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB2,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes2,Source buffer attributes for layer 2." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap2,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate2,Enable flag for continuous shadow load of AutoUpdateBaseAddress2." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel2,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride2,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension2,Source buffer dimensions of layer 2." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount2,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth2,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits2,Size of color components for RGB. YUV and index formats (layer 2)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat2,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed2,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen2,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue2,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha2,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift2,Bit position of color components for RGB. YUV and index formats (layer 2)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed2,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen2,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue2,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha2,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset2,Position of layer 2 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset2,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset2,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset2,Clip window position for layer 2." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset2,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset2,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions2,Clip window size for layer 2." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight2,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth2,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor2,Constant color for layer 2." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed2,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen2,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue2,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha2,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty2,Common properties of layer 2." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable2,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable2,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable2,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode2,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB2,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable2,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable2,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable2,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable2,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable2,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable2,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode2,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable2,See PaletteEnable0." "0,1" group.long 0x1E00C0++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress3,Source buffer base address of layer 3." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress3,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB3,Source buffer base address of layer 3." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB3,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress3,Source buffer base address of layer 3." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress3,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB3,Source buffer base address of layer 3." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB3,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes3,Source buffer attributes for layer 3." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap3,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate3,Enable flag for continuous shadow load of AutoUpdateBaseAddress3." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel3,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride3,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension3,Source buffer dimensions of layer 3." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount3,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth3,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits3,Size of color components for RGB. YUV and index formats (layer 3)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat3,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed3,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen3,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue3,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha3,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift3,Bit position of color components for RGB. YUV and index formats (layer 3)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed3,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen3,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue3,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha3,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset3,Position of layer 3 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset3,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset3,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset3,Clip window position for layer 3." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset3,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset3,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions3,Clip window size for layer 3." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight3,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth3,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor3,Constant color for layer 3." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed3,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen3,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue3,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha3,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty3,Common properties of layer 3." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable3,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable3,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable3,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode3,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB3,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable3,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable3,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable3,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable3,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable3,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable3,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode3,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable3,See PaletteEnable0." "0,1" group.long 0x1E00F8++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress4,Source buffer base address of layer 4." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress4,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB4,Source buffer base address of layer 4." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB4,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress4,Source buffer base address of layer 4." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress4,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB4,Source buffer base address of layer 4." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB4,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes4,Source buffer attributes for layer 4." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap4,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate4,Enable flag for continuous shadow load of AutoUpdateBaseAddress4." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel4,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride4,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension4,Source buffer dimensions of layer 4." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount4,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth4,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits4,Size of color components for RGB. YUV and index formats (layer 4)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat4,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed4,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen4,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue4,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha4,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift4,Bit position of color components for RGB. YUV and index formats (layer 4)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed4,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen4,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue4,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha4,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset4,Position of layer 4 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset4,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset4,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset4,Clip window position for layer 4." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset4,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset4,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions4,Clip window size for layer 4." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight4,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth4,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor4,Constant color for layer 4." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed4,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen4,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue4,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha4,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty4,Common properties of layer 4." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable4,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable4,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable4,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode4,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB4,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable4,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable4,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable4,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable4,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable4,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable4,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode4,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable4,See PaletteEnable0." "0,1" group.long 0x1E0130++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress5,Source buffer base address of layer 5." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress5,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB5,Source buffer base address of layer 5." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB5,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress5,Source buffer base address of layer 5." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress5,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB5,Source buffer base address of layer 5." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB5,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes5,Source buffer attributes for layer 5." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap5,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate5,Enable flag for continuous shadow load of AutoUpdateBaseAddress5." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel5,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride5,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension5,Source buffer dimensions of layer 5." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount5,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth5,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits5,Size of color components for RGB. YUV and index formats (layer 5)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat5,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed5,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen5,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue5,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha5,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift5,Bit position of color components for RGB. YUV and index formats (layer 5)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed5,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen5,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue5,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha5,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset5,Position of layer 5 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset5,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset5,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset5,Clip window position for layer 5." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset5,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset5,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions5,Clip window size for layer 5." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight5,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth5,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor5,Constant color for layer 5." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed5,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen5,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue5,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha5,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty5,Common properties of layer 5." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable5,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable5,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable5,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode5,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB5,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable5,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable5,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable5,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable5,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable5,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable5,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode5,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable5,See PaletteEnable0." "0,1" group.long 0x1E0168++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress6,Source buffer base address of layer 6." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress6,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB6,Source buffer base address of layer 6." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB6,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress6,Source buffer base address of layer 6." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress6,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB6,Source buffer base address of layer 6." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB6,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes6,Source buffer attributes for layer 6." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap6,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate6,Enable flag for continuous shadow load of AutoUpdateBaseAddress6." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel6,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride6,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension6,Source buffer dimensions of layer 6." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount6,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth6,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits6,Size of color components for RGB. YUV and index formats (layer 6)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat6,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed6,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen6,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue6,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha6,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift6,Bit position of color components for RGB. YUV and index formats (layer 6)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed6,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen6,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue6,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha6,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset6,Position of layer 6 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset6,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset6,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset6,Clip window position for layer 6." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset6,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset6,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions6,Clip window size for layer 6." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight6,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth6,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor6,Constant color for layer 6." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed6,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen6,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue6,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha6,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty6,Common properties of layer 6." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable6,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable6,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable6,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode6,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB6,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable6,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable6,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable6,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable6,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable6,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable6,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode6,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable6,See PaletteEnable0." "0,1" group.long 0x1E01A0++0x33 line.long 0x0 "pixeng_fetchlayer1_BaseAddress7,Source buffer base address of layer 7." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_BaseAddress7,See BaseAddress0." line.long 0x4 "pixeng_fetchlayer1_BaseAddressMSB7,Source buffer base address of layer 7." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_BaseAddressMSB7,See BaseAddressMSB0." line.long 0x8 "pixeng_fetchlayer1_AutoUpdateBaseAddress7,Source buffer base address of layer 7." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddress7,See AutoUpdateBaseAddress0." line.long 0xC "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB7,Source buffer base address of layer 7." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_AutoUpdateBaseAddressMSB7,See AutoUpdateBaseAddressMSB0." line.long 0x10 "pixeng_fetchlayer1_SourceBufferAttributes7,Source buffer attributes for layer 7." bitfld.long 0x10 31. "pixeng_fetchlayer1_DWordByteSwap7,See DWordByteSwap0." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchlayer1_BaseAddressAutoUpdate7,Enable flag for continuous shadow load of AutoUpdateBaseAddress7." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchlayer1_BitsPerPixel7,See BitsPerPixel0." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchlayer1_Stride7,See Stride0." line.long 0x14 "pixeng_fetchlayer1_SourceBufferDimension7,Source buffer dimensions of layer 7." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchlayer1_LineCount7,See LineCount0." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchlayer1_LineWidth7,See LineWidth0." line.long 0x18 "pixeng_fetchlayer1_ColorComponentBits7,Size of color components for RGB. YUV and index formats (layer 7)." bitfld.long 0x18 31. "pixeng_fetchlayer1_ITUFormat7,See ITUFormat0." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchlayer1_ComponentBitsRed7,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchlayer1_ComponentBitsGreen7,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchlayer1_ComponentBitsBlue7,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchlayer1_ComponentBitsAlpha7,Alpha." line.long 0x1C "pixeng_fetchlayer1_ColorComponentShift7,Bit position of color components for RGB. YUV and index formats (layer 7)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchlayer1_ComponentShiftRed7,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchlayer1_ComponentShiftGreen7,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchlayer1_ComponentShiftBlue7,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchlayer1_ComponentShiftAlpha7,Alpha." line.long 0x20 "pixeng_fetchlayer1_LayerOffset7,Position of layer 7 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchlayer1_LayerYOffset7,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchlayer1_LayerXOffset7,Horizontal offset (X)." line.long 0x24 "pixeng_fetchlayer1_ClipWindowOffset7,Clip window position for layer 7." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchlayer1_ClipWindowYOffset7,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchlayer1_ClipWindowXOffset7,Horizontal position (X)." line.long 0x28 "pixeng_fetchlayer1_ClipWindowDimensions7,Clip window size for layer 7." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchlayer1_ClipWindowHeight7,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchlayer1_ClipWindowWidth7,Width." line.long 0x2C "pixeng_fetchlayer1_ConstantColor7,Constant color for layer 7." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchlayer1_ConstantRed7,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchlayer1_ConstantGreen7,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchlayer1_ConstantBlue7,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_ConstantAlpha7,Alpha." line.long 0x30 "pixeng_fetchlayer1_LayerProperty7,Common properties of layer 7." bitfld.long 0x30 31. "pixeng_fetchlayer1_SourceBufferEnable7,See SourceBufferEnable0." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchlayer1_ClipWindowEnable7,See ClipWindowEnable0." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchlayer1_GammaRemoveEnable7,See GammaRemoveEnable0." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchlayer1_YUVConversionMode7,See YUVConversionMode0." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchlayer1_PremulConstRGB7,See PremulConstRGB0." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchlayer1_RGBAlphaTransEnable7,See RGBAlphaTransSelect0." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchlayer1_RGBAlphaConstEnable7,See RGBAlphaConstSelect0." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchlayer1_RGBAlphaSrcEnable7,See RGBAlphaSrcSelect0." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchlayer1_AlphaTransEnable7,See AlphaTransSelect0." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchlayer1_AlphaConstEnable7,See AlphaConstSelect0." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchlayer1_AlphaSrcEnable7,See AlphaSrcSelect0." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchlayer1_TileMode7,See TileMode0." "0,1,2,3" newline bitfld.long 0x30 0. "pixeng_fetchlayer1_PaletteEnable7,See PaletteEnable0." "0,1" group.long 0x1E01D8++0xF line.long 0x0 "pixeng_fetchlayer1_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchlayer1_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchlayer1_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchlayer1_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchlayer1_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchlayer1_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchlayer1_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchlayer1_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchlayer1_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchlayer1_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchlayer1_Control,Shared common control settings for all layers." hexmask.long.byte 0x8 17.--20. 1. "pixeng_fetchlayer1_ClipLayer,Index of the layer which is used to fill the clipping area of the frame layout when ClipColor is set to LAYER." newline bitfld.long 0x8 16. "pixeng_fetchlayer1_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 8.--10. "pixeng_fetchlayer1_PaletteIdxWidth,Number minus one of least significant bits of pixel data read from the source buffer that are used as index value for color palette look-up." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 7. "pixeng_fetchlayer1_RawPixel,Raw pixel mode." "0,1" line.long 0xC "pixeng_fetchlayer1_TriggerEnable,Shadow load enable flags for all layers." bitfld.long 0xC 7. "pixeng_fetchlayer1_ShdLdReq7,Shadow load request flags for layer7 (one time load)." "0,1" newline bitfld.long 0xC 6. "pixeng_fetchlayer1_ShdLdReq6,Shadow load request flags for layer6 (one time load)." "0,1" newline bitfld.long 0xC 5. "pixeng_fetchlayer1_ShdLdReq5,Shadow load request flags for layer5 (one time load)." "0,1" newline bitfld.long 0xC 4. "pixeng_fetchlayer1_ShdLdReq4,Shadow load request flags for layer4 (one time load)." "0,1" newline bitfld.long 0xC 3. "pixeng_fetchlayer1_ShdLdReq3,Shadow load request flags for layer3 (one time load)." "0,1" newline bitfld.long 0xC 2. "pixeng_fetchlayer1_ShdLdReq2,Shadow load request flags for layer2 (one time load)." "0,1" newline bitfld.long 0xC 1. "pixeng_fetchlayer1_ShdLdReq1,Shadow load request flags for layer1 (one time load)." "0,1" newline bitfld.long 0xC 0. "pixeng_fetchlayer1_ShdLdReq0,Shadow load request flags for layer0 (one time load)." "0,1" wgroup.long 0x1E01E8++0x7 line.long 0x0 "pixeng_fetchlayer1_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchlayer1_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchlayer1_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchlayer1_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x1E01F0++0x3 line.long 0x0 "pixeng_fetchlayer1_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchlayer1_FetchType,This field can be used to determine what kind of fetch unit this is." rgroup.long 0x1E01F8++0x3 line.long 0x0 "pixeng_fetchlayer1_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x0 8.--12. 1. "pixeng_fetchlayer1_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x0 0.--7. 1. "pixeng_fetchlayer1_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x1E01FC++0x3 line.long 0x0 "pixeng_fetchlayer1_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchlayer1_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchlayer1_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x1E0200++0x43 line.long 0x0 "pixeng_fetchlayer1_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchlayer1_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchlayer1_CurBaseAddress1,Source buffer base address of layer 1." hexmask.long 0x8 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress1,Current Working BaseAddress for layer 1." line.long 0xC "pixeng_fetchlayer1_CurBaseAddressMSB1,MSB bits of Current Working BaseAddress for layer 1." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB1,MSB bits of Current Working BaseAddress for layer 1." line.long 0x10 "pixeng_fetchlayer1_CurBaseAddress2,Source buffer base address of layer 2." hexmask.long 0x10 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress2,Current Working BaseAddress for layer 2." line.long 0x14 "pixeng_fetchlayer1_CurBaseAddressMSB2,MSB bits of Current Working BaseAddress for layer 2." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB2,MSB bits of Current Working BaseAddress for layer 2." line.long 0x18 "pixeng_fetchlayer1_CurBaseAddress3,Source buffer base address of layer 3." hexmask.long 0x18 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress3,Current Working BaseAddress for layer 3." line.long 0x1C "pixeng_fetchlayer1_CurBaseAddressMSB3,MSB bits of Current Working BaseAddress for layer 3." hexmask.long.byte 0x1C 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB3,MSB bits of Current Working BaseAddress for layer 3." line.long 0x20 "pixeng_fetchlayer1_CurBaseAddress4,Source buffer base address of layer 4." hexmask.long 0x20 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress4,Current Working BaseAddress for layer 4." line.long 0x24 "pixeng_fetchlayer1_CurBaseAddressMSB4,MSB bits of Current Working BaseAddress for layer 4." hexmask.long.byte 0x24 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB4,MSB bits of Current Working BaseAddress for layer 4." line.long 0x28 "pixeng_fetchlayer1_CurBaseAddress5,Source buffer base address of layer 5." hexmask.long 0x28 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress5,Current Working BaseAddress for layer 5." line.long 0x2C "pixeng_fetchlayer1_CurBaseAddressMSB5,MSB bits of Current Working BaseAddress for layer 5." hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB5,MSB bits of Current Working BaseAddress for layer 5." line.long 0x30 "pixeng_fetchlayer1_CurBaseAddress6,Source buffer base address of layer 6." hexmask.long 0x30 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress6,Current Working BaseAddress for layer 6." line.long 0x34 "pixeng_fetchlayer1_CurBaseAddressMSB6,MSB bits of Current Working BaseAddress for layer 6." hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB6,MSB bits of Current Working BaseAddress for layer 6." line.long 0x38 "pixeng_fetchlayer1_CurBaseAddress7,Source buffer base address of layer 7." hexmask.long 0x38 0.--31. 1. "pixeng_fetchlayer1_CurBaseAddress7,Current Working BaseAddress for layer 7." line.long 0x3C "pixeng_fetchlayer1_CurBaseAddressMSB7,MSB bits of Current Working BaseAddress for layer 7." hexmask.long.byte 0x3C 0.--7. 1. "pixeng_fetchlayer1_CurBaseAddressMSB7,MSB bits of Current Working BaseAddress for layer 7." line.long 0x40 "pixeng_fetchlayer1_HiddenStatus,Hidden status informations." bitfld.long 0x40 15. "pixeng_fetchlayer1_ShadowStatus7,Shadow load status for layer7." "0,1" newline bitfld.long 0x40 14. "pixeng_fetchlayer1_ShadowStatus6,Shadow load status for layer6." "0,1" newline bitfld.long 0x40 13. "pixeng_fetchlayer1_ShadowStatus5,Shadow load status for layer5." "0,1" newline bitfld.long 0x40 12. "pixeng_fetchlayer1_ShadowStatus4,Shadow load status for layer4." "0,1" newline bitfld.long 0x40 11. "pixeng_fetchlayer1_ShadowStatus3,Shadow load status for layer3." "0,1" newline bitfld.long 0x40 10. "pixeng_fetchlayer1_ShadowStatus2,Shadow load status for layer2." "0,1" newline bitfld.long 0x40 9. "pixeng_fetchlayer1_ShadowStatus1,Shadow load status for layer1." "0,1" newline bitfld.long 0x40 8. "pixeng_fetchlayer1_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x40 6. "pixeng_fetchlayer1_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x40 5. "pixeng_fetchlayer1_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x40 4. "pixeng_fetchlayer1_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x40 0. "pixeng_fetchlayer1_StatusBusy,Fetch unit is busy." "0,1" group.long 0x1E0400++0x3 line.long 0x0 "pixeng_fetchlayer1_ColorPalette,Color palette look up table." hexmask.long.tbyte 0x0 0.--23. 1. "pixeng_fetchlayer1_ColorPalette,Entry of the color palette look-up table" wgroup.long 0x1E1000++0x3 line.long 0x0 "pixeng_fetchlayer1cfg_fetchlayer1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchlayer1cfg_fetchlayer1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1E1004++0x7 line.long 0x0 "pixeng_fetchlayer1cfg_fetchlayer1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchlayer1cfg_fetchlayer1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchlayer1cfg_fetchlayer1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchlayer1cfg_fetchlayer1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_fetchlayer1cfg_fetchlayer1_Status,Status information for pixel engine configuration of fetchlayer1" bitfld.long 0x4 16.--18. "pixeng_fetchlayer1cfg_fetchlayer1_sel,Status of the connection of the fetchlayer1 module" "0,1,2,3,4,5,6,7" wgroup.long 0x1F0000++0x3 line.long 0x0 "pixeng_fetchyuv3_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv3_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1F0004++0x3 line.long 0x0 "pixeng_fetchyuv3_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv3_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv3_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv3_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1F0008++0x1B line.long 0x0 "pixeng_fetchyuv3_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchyuv3_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchyuv3_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetchyuv3_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetchyuv3_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetchyuv3_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetchyuv3_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetchyuv3_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv3_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetchyuv3_RingBufStartAddr0,Ring buffer setup for layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv3_RingBufStartAddr0,Start address of the ring buffer." line.long 0xC "pixeng_fetchyuv3_RingBufStartAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv3_RingBufStartAddrMSB0,MSB bits for start address of the ring buffer." line.long 0x10 "pixeng_fetchyuv3_RingBufWrapAddr0,Ring buffer setup for layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetchyuv3_RingBufWrapAddr0,End address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_fetchyuv3_RingBufWrapAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchyuv3_RingBufWrapAddrMSB0,MSB bits of end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_fetchyuv3_FrameProperties0,Frame property setup for layer 0." bitfld.long 0x18 0. "pixeng_fetchyuv3_FieldId0,Field identifier that is generated for subsequent units (0 = progressive frame or interlaced field with even line indices 1 = odd field)." "0: progressive frame or interlaced field with even..,1: odd field)" group.long 0x1F0028++0x33 line.long 0x0 "pixeng_fetchyuv3_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv3_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchyuv3_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv3_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchyuv3_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv3_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchyuv3_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv3_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchyuv3_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchyuv3_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchyuv3_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchyuv3_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchyuv3_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchyuv3_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchyuv3_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchyuv3_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchyuv3_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchyuv3_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchyuv3_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchyuv3_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchyuv3_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchyuv3_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchyuv3_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchyuv3_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchyuv3_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchyuv3_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchyuv3_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchyuv3_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchyuv3_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchyuv3_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchyuv3_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchyuv3_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchyuv3_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchyuv3_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchyuv3_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchyuv3_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchyuv3_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchyuv3_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchyuv3_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchyuv3_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchyuv3_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchyuv3_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchyuv3_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchyuv3_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchyuv3_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchyuv3_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchyuv3_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchyuv3_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 14. "pixeng_fetchyuv3_RGBAlphaMaskEnable0,Value 1 enables mask alpha (read by another Fetch unit from a separate alpha layer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchyuv3_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchyuv3_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchyuv3_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 10. "pixeng_fetchyuv3_AlphaMaskEnable0,Value 1 enables mask alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchyuv3_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchyuv3_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchyuv3_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x1F0060++0xB line.long 0x0 "pixeng_fetchyuv3_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchyuv3_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchyuv3_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchyuv3_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchyuv3_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchyuv3_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchyuv3_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchyuv3_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchyuv3_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchyuv3_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchyuv3_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetchyuv3_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 13.--14. "pixeng_fetchyuv3_YUV420UpsamplingMode,Selects a method for vertical up-sampling of YUV 4:2:0 input data into YUV 4:2:2 data." "0,1,2,3" newline bitfld.long 0x8 11.--12. "pixeng_fetchyuv3_SecInputSelect,Selects function for the second frame input port." "0,1,2,3" newline bitfld.long 0x8 7. "pixeng_fetchyuv3_RawPixel,Raw pixel mode." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv3_ChromaHReplEn,Selects a method for vertical up-sampling of YUV 4:2:0 input data." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv3_YUV422UpsamplingMode,Selects a method for horizontal up-sampling of YUV 4:2:2/4:2:0 input data." "0,1" newline bitfld.long 0x8 3.--4. "pixeng_fetchyuv3_InputSelect,Selects function for the frame input port." "0,1,2,3" newline bitfld.long 0x8 0.--2. "pixeng_fetchyuv3_RasterMode,Selects a method how to generate source buffer sample points." "0,1,2,3,4,5,6,7" wgroup.long 0x1F006C++0x7 line.long 0x0 "pixeng_fetchyuv3_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchyuv3_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchyuv3_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchyuv3_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x1F0074++0xF line.long 0x0 "pixeng_fetchyuv3_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchyuv3_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetchyuv3_ReadAddress0,Ring buffer synchronization for layer 0." hexmask.long 0x4 0.--31. 1. "pixeng_fetchyuv3_ReadAddress0,Last burst address that was read from the layer's source buffer." line.long 0x8 "pixeng_fetchyuv3_ReadAddressMSB0,Ring buffer synchronization for layer 0." hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchyuv3_ReadAddressMSB0,MSB bits of last burst address that was read from the layer's source buffer." line.long 0xC "pixeng_fetchyuv3_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0xC 8.--12. 1. "pixeng_fetchyuv3_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv3_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x1F0084++0x3 line.long 0x0 "pixeng_fetchyuv3_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchyuv3_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchyuv3_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x1F0088++0xB line.long 0x0 "pixeng_fetchyuv3_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv3_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchyuv3_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv3_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchyuv3_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetchyuv3_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv3_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv3_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetchyuv3_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetchyuv3_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x1F1000++0x3 line.long 0x0 "pixeng_fetchyuv3cfg_fetchyuv3_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv3cfg_fetchyuv3_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x1F1004++0x3 line.long 0x0 "pixeng_fetchyuv3cfg_fetchyuv3_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv3cfg_fetchyuv3_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv3cfg_fetchyuv3_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv3cfg_fetchyuv3_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x1F1008++0x3 line.long 0x0 "pixeng_fetchyuv3cfg_fetchyuv3_Dynamic,Dynamic pixel engine configuration for fetchyuv3" hexmask.long.byte 0x0 8.--13. 1. "pixeng_fetchyuv3cfg_fetchyuv3_sec_sel,Selection of the source for the sec input of the fetchyuv3 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_fetchyuv3cfg_fetchyuv3_src_sel,Selection of the source for the src input of the fetchyuv3 module" rgroup.long 0x1F100C++0x3 line.long 0x0 "pixeng_fetchyuv3cfg_fetchyuv3_Status,Status information for pixel engine configuration of fetchyuv3" bitfld.long 0x0 16.--18. "pixeng_fetchyuv3cfg_fetchyuv3_sel,Status of the connection of the fetchyuv3 module" "0,1,2,3,4,5,6,7" wgroup.long 0x200000++0x3 line.long 0x0 "pixeng_fetchyuv0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x200004++0x3 line.long 0x0 "pixeng_fetchyuv0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x200008++0x1B line.long 0x0 "pixeng_fetchyuv0_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchyuv0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchyuv0_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetchyuv0_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetchyuv0_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetchyuv0_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetchyuv0_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetchyuv0_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv0_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetchyuv0_RingBufStartAddr0,Ring buffer setup for layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv0_RingBufStartAddr0,Start address of the ring buffer." line.long 0xC "pixeng_fetchyuv0_RingBufStartAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv0_RingBufStartAddrMSB0,MSB bits for start address of the ring buffer." line.long 0x10 "pixeng_fetchyuv0_RingBufWrapAddr0,Ring buffer setup for layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetchyuv0_RingBufWrapAddr0,End address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_fetchyuv0_RingBufWrapAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchyuv0_RingBufWrapAddrMSB0,MSB bits of end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_fetchyuv0_FrameProperties0,Frame property setup for layer 0." bitfld.long 0x18 0. "pixeng_fetchyuv0_FieldId0,Field identifier that is generated for subsequent units (0 = progressive frame or interlaced field with even line indices 1 = odd field)." "0: progressive frame or interlaced field with even..,1: odd field)" group.long 0x200028++0x33 line.long 0x0 "pixeng_fetchyuv0_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv0_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchyuv0_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv0_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchyuv0_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv0_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchyuv0_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv0_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchyuv0_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchyuv0_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchyuv0_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchyuv0_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchyuv0_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchyuv0_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchyuv0_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchyuv0_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchyuv0_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchyuv0_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchyuv0_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchyuv0_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchyuv0_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchyuv0_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchyuv0_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchyuv0_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchyuv0_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchyuv0_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchyuv0_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchyuv0_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchyuv0_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchyuv0_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchyuv0_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchyuv0_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchyuv0_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchyuv0_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchyuv0_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchyuv0_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchyuv0_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchyuv0_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchyuv0_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchyuv0_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchyuv0_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchyuv0_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchyuv0_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchyuv0_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchyuv0_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchyuv0_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchyuv0_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchyuv0_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 14. "pixeng_fetchyuv0_RGBAlphaMaskEnable0,Value 1 enables mask alpha (read by another Fetch unit from a separate alpha layer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchyuv0_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchyuv0_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchyuv0_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 10. "pixeng_fetchyuv0_AlphaMaskEnable0,Value 1 enables mask alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchyuv0_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchyuv0_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchyuv0_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x200060++0xB line.long 0x0 "pixeng_fetchyuv0_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchyuv0_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchyuv0_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchyuv0_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchyuv0_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchyuv0_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchyuv0_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchyuv0_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchyuv0_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchyuv0_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchyuv0_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetchyuv0_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 13.--14. "pixeng_fetchyuv0_YUV420UpsamplingMode,Selects a method for vertical up-sampling of YUV 4:2:0 input data into YUV 4:2:2 data." "0,1,2,3" newline bitfld.long 0x8 11.--12. "pixeng_fetchyuv0_SecInputSelect,Selects function for the second frame input port." "0,1,2,3" newline bitfld.long 0x8 7. "pixeng_fetchyuv0_RawPixel,Raw pixel mode." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv0_ChromaHReplEn,Selects a method for vertical up-sampling of YUV 4:2:0 input data." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv0_YUV422UpsamplingMode,Selects a method for horizontal up-sampling of YUV 4:2:2/4:2:0 input data." "0,1" newline bitfld.long 0x8 3.--4. "pixeng_fetchyuv0_InputSelect,Selects function for the frame input port." "0,1,2,3" newline bitfld.long 0x8 0.--2. "pixeng_fetchyuv0_RasterMode,Selects a method how to generate source buffer sample points." "0,1,2,3,4,5,6,7" wgroup.long 0x20006C++0x7 line.long 0x0 "pixeng_fetchyuv0_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchyuv0_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchyuv0_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchyuv0_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x200074++0xF line.long 0x0 "pixeng_fetchyuv0_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchyuv0_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetchyuv0_ReadAddress0,Ring buffer synchronization for layer 0." hexmask.long 0x4 0.--31. 1. "pixeng_fetchyuv0_ReadAddress0,Last burst address that was read from the layer's source buffer." line.long 0x8 "pixeng_fetchyuv0_ReadAddressMSB0,Ring buffer synchronization for layer 0." hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchyuv0_ReadAddressMSB0,MSB bits of last burst address that was read from the layer's source buffer." line.long 0xC "pixeng_fetchyuv0_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0xC 8.--12. 1. "pixeng_fetchyuv0_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv0_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x200084++0x3 line.long 0x0 "pixeng_fetchyuv0_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchyuv0_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchyuv0_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x200088++0xB line.long 0x0 "pixeng_fetchyuv0_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv0_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchyuv0_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv0_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchyuv0_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetchyuv0_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv0_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv0_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetchyuv0_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetchyuv0_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x201000++0x3 line.long 0x0 "pixeng_fetchyuv0cfg_fetchyuv0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv0cfg_fetchyuv0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x201004++0x3 line.long 0x0 "pixeng_fetchyuv0cfg_fetchyuv0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv0cfg_fetchyuv0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv0cfg_fetchyuv0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv0cfg_fetchyuv0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x201008++0x3 line.long 0x0 "pixeng_fetchyuv0cfg_fetchyuv0_Dynamic,Dynamic pixel engine configuration for fetchyuv0" hexmask.long.byte 0x0 8.--13. 1. "pixeng_fetchyuv0cfg_fetchyuv0_sec_sel,Selection of the source for the sec input of the fetchyuv0 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_fetchyuv0cfg_fetchyuv0_src_sel,Selection of the source for the src input of the fetchyuv0 module" rgroup.long 0x20100C++0x3 line.long 0x0 "pixeng_fetchyuv0cfg_fetchyuv0_Status,Status information for pixel engine configuration of fetchyuv0" bitfld.long 0x0 16.--18. "pixeng_fetchyuv0cfg_fetchyuv0_sel,Status of the connection of the fetchyuv0 module" "0,1,2,3,4,5,6,7" wgroup.long 0x210000++0x3 line.long 0x0 "pixeng_fetcheco0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x210004++0x3 line.long 0x0 "pixeng_fetcheco0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x210008++0x3B line.long 0x0 "pixeng_fetcheco0_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetcheco0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetcheco0_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetcheco0_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetcheco0_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetcheco0_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetcheco0_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco0_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco0_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetcheco0_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetcheco0_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0xC "pixeng_fetcheco0_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetcheco0_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x10 "pixeng_fetcheco0_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetcheco0_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0x14 "pixeng_fetcheco0_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetcheco0_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x18 "pixeng_fetcheco0_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x18 31. "pixeng_fetcheco0_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x18 30. "pixeng_fetcheco0_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x18 16.--21. 1. "pixeng_fetcheco0_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x18 0.--15. 1. "pixeng_fetcheco0_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x1C "pixeng_fetcheco0_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x1C 16.--29. 1. "pixeng_fetcheco0_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x1C 0.--13. 1. "pixeng_fetcheco0_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x20 "pixeng_fetcheco0_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x20 31. "pixeng_fetcheco0_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x20 24.--27. 1. "pixeng_fetcheco0_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x20 16.--19. 1. "pixeng_fetcheco0_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x20 8.--11. 1. "pixeng_fetcheco0_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x20 0.--3. 1. "pixeng_fetcheco0_ComponentBitsAlpha0,Alpha." line.long 0x24 "pixeng_fetcheco0_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x24 24.--28. 1. "pixeng_fetcheco0_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x24 16.--20. 1. "pixeng_fetcheco0_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x24 8.--12. 1. "pixeng_fetcheco0_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x24 0.--4. 1. "pixeng_fetcheco0_ComponentShiftAlpha0,Alpha." line.long 0x28 "pixeng_fetcheco0_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x28 16.--30. 1. "pixeng_fetcheco0_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x28 0.--14. 1. "pixeng_fetcheco0_LayerXOffset0,Horizontal offset (X)." line.long 0x2C "pixeng_fetcheco0_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x2C 16.--30. 1. "pixeng_fetcheco0_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x2C 0.--14. 1. "pixeng_fetcheco0_ClipWindowXOffset0,Horizontal position (X)." line.long 0x30 "pixeng_fetcheco0_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x30 16.--29. 1. "pixeng_fetcheco0_ClipWindowHeight0,Height." newline hexmask.long.word 0x30 0.--13. 1. "pixeng_fetcheco0_ClipWindowWidth0,Width." line.long 0x34 "pixeng_fetcheco0_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x34 24.--31. 1. "pixeng_fetcheco0_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x34 16.--23. 1. "pixeng_fetcheco0_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x34 8.--15. 1. "pixeng_fetcheco0_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetcheco0_ConstantAlpha0,Alpha." line.long 0x38 "pixeng_fetcheco0_LayerProperty0,Common properties of layer 0." bitfld.long 0x38 31. "pixeng_fetcheco0_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x38 30. "pixeng_fetcheco0_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x38 4.--5. "pixeng_fetcheco0_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x210048++0xB line.long 0x0 "pixeng_fetcheco0_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetcheco0_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetcheco0_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetcheco0_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetcheco0_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetcheco0_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetcheco0_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetcheco0_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetcheco0_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetcheco0_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetcheco0_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetcheco0_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 7. "pixeng_fetcheco0_RawPixel,Raw pixel mode." "0,1" wgroup.long 0x210054++0x7 line.long 0x0 "pixeng_fetcheco0_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetcheco0_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetcheco0_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetcheco0_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x21005C++0x7 line.long 0x0 "pixeng_fetcheco0_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetcheco0_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetcheco0_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco0_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco0_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." rgroup.long 0x210068++0xB line.long 0x0 "pixeng_fetcheco0_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco0_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetcheco0_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco0_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetcheco0_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetcheco0_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetcheco0_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetcheco0_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetcheco0_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetcheco0_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x211000++0x3 line.long 0x0 "pixeng_fetcheco0cfg_fetcheco0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco0cfg_fetcheco0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x211004++0x7 line.long 0x0 "pixeng_fetcheco0cfg_fetcheco0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco0cfg_fetcheco0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco0cfg_fetcheco0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco0cfg_fetcheco0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_fetcheco0cfg_fetcheco0_Status,Status information for pixel engine configuration of fetcheco0" bitfld.long 0x4 16.--18. "pixeng_fetcheco0cfg_fetcheco0_sel,Status of the connection of the fetcheco0 module" "0,1,2,3,4,5,6,7" wgroup.long 0x220000++0x3 line.long 0x0 "pixeng_fetchyuv1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x220004++0x3 line.long 0x0 "pixeng_fetchyuv1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x220008++0x1B line.long 0x0 "pixeng_fetchyuv1_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchyuv1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchyuv1_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetchyuv1_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetchyuv1_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetchyuv1_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetchyuv1_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetchyuv1_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv1_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetchyuv1_RingBufStartAddr0,Ring buffer setup for layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv1_RingBufStartAddr0,Start address of the ring buffer." line.long 0xC "pixeng_fetchyuv1_RingBufStartAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv1_RingBufStartAddrMSB0,MSB bits for start address of the ring buffer." line.long 0x10 "pixeng_fetchyuv1_RingBufWrapAddr0,Ring buffer setup for layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetchyuv1_RingBufWrapAddr0,End address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_fetchyuv1_RingBufWrapAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchyuv1_RingBufWrapAddrMSB0,MSB bits of end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_fetchyuv1_FrameProperties0,Frame property setup for layer 0." bitfld.long 0x18 0. "pixeng_fetchyuv1_FieldId0,Field identifier that is generated for subsequent units (0 = progressive frame or interlaced field with even line indices 1 = odd field)." "0: progressive frame or interlaced field with even..,1: odd field)" group.long 0x220028++0x33 line.long 0x0 "pixeng_fetchyuv1_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv1_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchyuv1_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv1_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchyuv1_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv1_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchyuv1_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv1_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchyuv1_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchyuv1_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchyuv1_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchyuv1_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchyuv1_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchyuv1_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchyuv1_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchyuv1_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchyuv1_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchyuv1_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchyuv1_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchyuv1_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchyuv1_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchyuv1_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchyuv1_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchyuv1_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchyuv1_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchyuv1_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchyuv1_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchyuv1_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchyuv1_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchyuv1_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchyuv1_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchyuv1_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchyuv1_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchyuv1_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchyuv1_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchyuv1_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchyuv1_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchyuv1_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchyuv1_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchyuv1_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchyuv1_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchyuv1_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchyuv1_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchyuv1_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchyuv1_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchyuv1_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchyuv1_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchyuv1_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 14. "pixeng_fetchyuv1_RGBAlphaMaskEnable0,Value 1 enables mask alpha (read by another Fetch unit from a separate alpha layer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchyuv1_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchyuv1_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchyuv1_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 10. "pixeng_fetchyuv1_AlphaMaskEnable0,Value 1 enables mask alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchyuv1_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchyuv1_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchyuv1_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x220060++0xB line.long 0x0 "pixeng_fetchyuv1_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchyuv1_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchyuv1_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchyuv1_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchyuv1_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchyuv1_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchyuv1_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchyuv1_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchyuv1_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchyuv1_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchyuv1_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetchyuv1_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 13.--14. "pixeng_fetchyuv1_YUV420UpsamplingMode,Selects a method for vertical up-sampling of YUV 4:2:0 input data into YUV 4:2:2 data." "0,1,2,3" newline bitfld.long 0x8 11.--12. "pixeng_fetchyuv1_SecInputSelect,Selects function for the second frame input port." "0,1,2,3" newline bitfld.long 0x8 7. "pixeng_fetchyuv1_RawPixel,Raw pixel mode." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv1_ChromaHReplEn,Selects a method for vertical up-sampling of YUV 4:2:0 input data." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv1_YUV422UpsamplingMode,Selects a method for horizontal up-sampling of YUV 4:2:2/4:2:0 input data." "0,1" newline bitfld.long 0x8 3.--4. "pixeng_fetchyuv1_InputSelect,Selects function for the frame input port." "0,1,2,3" newline bitfld.long 0x8 0.--2. "pixeng_fetchyuv1_RasterMode,Selects a method how to generate source buffer sample points." "0,1,2,3,4,5,6,7" wgroup.long 0x22006C++0x7 line.long 0x0 "pixeng_fetchyuv1_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchyuv1_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchyuv1_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchyuv1_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x220074++0xF line.long 0x0 "pixeng_fetchyuv1_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchyuv1_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetchyuv1_ReadAddress0,Ring buffer synchronization for layer 0." hexmask.long 0x4 0.--31. 1. "pixeng_fetchyuv1_ReadAddress0,Last burst address that was read from the layer's source buffer." line.long 0x8 "pixeng_fetchyuv1_ReadAddressMSB0,Ring buffer synchronization for layer 0." hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchyuv1_ReadAddressMSB0,MSB bits of last burst address that was read from the layer's source buffer." line.long 0xC "pixeng_fetchyuv1_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0xC 8.--12. 1. "pixeng_fetchyuv1_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv1_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x220084++0x3 line.long 0x0 "pixeng_fetchyuv1_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchyuv1_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchyuv1_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x220088++0xB line.long 0x0 "pixeng_fetchyuv1_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv1_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchyuv1_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv1_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchyuv1_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetchyuv1_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv1_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv1_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetchyuv1_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetchyuv1_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x221000++0x3 line.long 0x0 "pixeng_fetchyuv1cfg_fetchyuv1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv1cfg_fetchyuv1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x221004++0x3 line.long 0x0 "pixeng_fetchyuv1cfg_fetchyuv1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv1cfg_fetchyuv1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv1cfg_fetchyuv1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv1cfg_fetchyuv1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x221008++0x3 line.long 0x0 "pixeng_fetchyuv1cfg_fetchyuv1_Dynamic,Dynamic pixel engine configuration for fetchyuv1" hexmask.long.byte 0x0 8.--13. 1. "pixeng_fetchyuv1cfg_fetchyuv1_sec_sel,Selection of the source for the sec input of the fetchyuv1 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_fetchyuv1cfg_fetchyuv1_src_sel,Selection of the source for the src input of the fetchyuv1 module" rgroup.long 0x22100C++0x3 line.long 0x0 "pixeng_fetchyuv1cfg_fetchyuv1_Status,Status information for pixel engine configuration of fetchyuv1" bitfld.long 0x0 16.--18. "pixeng_fetchyuv1cfg_fetchyuv1_sel,Status of the connection of the fetchyuv1 module" "0,1,2,3,4,5,6,7" wgroup.long 0x230000++0x3 line.long 0x0 "pixeng_fetcheco1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x230004++0x3 line.long 0x0 "pixeng_fetcheco1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x230008++0x3B line.long 0x0 "pixeng_fetcheco1_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetcheco1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetcheco1_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetcheco1_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetcheco1_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetcheco1_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetcheco1_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco1_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco1_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetcheco1_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetcheco1_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0xC "pixeng_fetcheco1_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetcheco1_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x10 "pixeng_fetcheco1_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetcheco1_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0x14 "pixeng_fetcheco1_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetcheco1_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x18 "pixeng_fetcheco1_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x18 31. "pixeng_fetcheco1_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x18 30. "pixeng_fetcheco1_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x18 16.--21. 1. "pixeng_fetcheco1_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x18 0.--15. 1. "pixeng_fetcheco1_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x1C "pixeng_fetcheco1_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x1C 16.--29. 1. "pixeng_fetcheco1_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x1C 0.--13. 1. "pixeng_fetcheco1_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x20 "pixeng_fetcheco1_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x20 31. "pixeng_fetcheco1_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x20 24.--27. 1. "pixeng_fetcheco1_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x20 16.--19. 1. "pixeng_fetcheco1_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x20 8.--11. 1. "pixeng_fetcheco1_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x20 0.--3. 1. "pixeng_fetcheco1_ComponentBitsAlpha0,Alpha." line.long 0x24 "pixeng_fetcheco1_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x24 24.--28. 1. "pixeng_fetcheco1_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x24 16.--20. 1. "pixeng_fetcheco1_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x24 8.--12. 1. "pixeng_fetcheco1_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x24 0.--4. 1. "pixeng_fetcheco1_ComponentShiftAlpha0,Alpha." line.long 0x28 "pixeng_fetcheco1_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x28 16.--30. 1. "pixeng_fetcheco1_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x28 0.--14. 1. "pixeng_fetcheco1_LayerXOffset0,Horizontal offset (X)." line.long 0x2C "pixeng_fetcheco1_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x2C 16.--30. 1. "pixeng_fetcheco1_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x2C 0.--14. 1. "pixeng_fetcheco1_ClipWindowXOffset0,Horizontal position (X)." line.long 0x30 "pixeng_fetcheco1_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x30 16.--29. 1. "pixeng_fetcheco1_ClipWindowHeight0,Height." newline hexmask.long.word 0x30 0.--13. 1. "pixeng_fetcheco1_ClipWindowWidth0,Width." line.long 0x34 "pixeng_fetcheco1_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x34 24.--31. 1. "pixeng_fetcheco1_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x34 16.--23. 1. "pixeng_fetcheco1_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x34 8.--15. 1. "pixeng_fetcheco1_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetcheco1_ConstantAlpha0,Alpha." line.long 0x38 "pixeng_fetcheco1_LayerProperty0,Common properties of layer 0." bitfld.long 0x38 31. "pixeng_fetcheco1_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x38 30. "pixeng_fetcheco1_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x38 4.--5. "pixeng_fetcheco1_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x230048++0xB line.long 0x0 "pixeng_fetcheco1_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetcheco1_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetcheco1_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetcheco1_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetcheco1_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetcheco1_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetcheco1_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetcheco1_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetcheco1_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetcheco1_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetcheco1_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetcheco1_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 7. "pixeng_fetcheco1_RawPixel,Raw pixel mode." "0,1" wgroup.long 0x230054++0x7 line.long 0x0 "pixeng_fetcheco1_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetcheco1_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetcheco1_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetcheco1_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x23005C++0x7 line.long 0x0 "pixeng_fetcheco1_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetcheco1_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetcheco1_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco1_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco1_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." rgroup.long 0x230068++0xB line.long 0x0 "pixeng_fetcheco1_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco1_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetcheco1_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco1_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetcheco1_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetcheco1_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetcheco1_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetcheco1_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetcheco1_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetcheco1_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x231000++0x3 line.long 0x0 "pixeng_fetcheco1cfg_fetcheco1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco1cfg_fetcheco1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x231004++0x7 line.long 0x0 "pixeng_fetcheco1cfg_fetcheco1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco1cfg_fetcheco1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco1cfg_fetcheco1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco1cfg_fetcheco1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_fetcheco1cfg_fetcheco1_Status,Status information for pixel engine configuration of fetcheco1" bitfld.long 0x4 16.--18. "pixeng_fetcheco1cfg_fetcheco1_sel,Status of the connection of the fetcheco1 module" "0,1,2,3,4,5,6,7" wgroup.long 0x240000++0x3 line.long 0x0 "pixeng_fetchyuv2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x240004++0x3 line.long 0x0 "pixeng_fetchyuv2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x240008++0x1B line.long 0x0 "pixeng_fetchyuv2_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetchyuv2_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetchyuv2_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetchyuv2_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetchyuv2_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetchyuv2_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetchyuv2_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetchyuv2_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv2_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetchyuv2_RingBufStartAddr0,Ring buffer setup for layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv2_RingBufStartAddr0,Start address of the ring buffer." line.long 0xC "pixeng_fetchyuv2_RingBufStartAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv2_RingBufStartAddrMSB0,MSB bits for start address of the ring buffer." line.long 0x10 "pixeng_fetchyuv2_RingBufWrapAddr0,Ring buffer setup for layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetchyuv2_RingBufWrapAddr0,End address of the ring buffer (last byte of the buffer plus one)." line.long 0x14 "pixeng_fetchyuv2_RingBufWrapAddrMSB0,Ring buffer setup for layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetchyuv2_RingBufWrapAddrMSB0,MSB bits of end address of the ring buffer (last byte of the buffer plus one)." line.long 0x18 "pixeng_fetchyuv2_FrameProperties0,Frame property setup for layer 0." bitfld.long 0x18 0. "pixeng_fetchyuv2_FieldId0,Field identifier that is generated for subsequent units (0 = progressive frame or interlaced field with even line indices 1 = odd field)." "0: progressive frame or interlaced field with even..,1: odd field)" group.long 0x240028++0x33 line.long 0x0 "pixeng_fetchyuv2_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv2_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0x4 "pixeng_fetchyuv2_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv2_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x8 "pixeng_fetchyuv2_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetchyuv2_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0xC "pixeng_fetchyuv2_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv2_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x10 "pixeng_fetchyuv2_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x10 31. "pixeng_fetchyuv2_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x10 30. "pixeng_fetchyuv2_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x10 16.--21. 1. "pixeng_fetchyuv2_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x10 0.--15. 1. "pixeng_fetchyuv2_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x14 "pixeng_fetchyuv2_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x14 16.--29. 1. "pixeng_fetchyuv2_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x14 0.--13. 1. "pixeng_fetchyuv2_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x18 "pixeng_fetchyuv2_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x18 31. "pixeng_fetchyuv2_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x18 24.--27. 1. "pixeng_fetchyuv2_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x18 16.--19. 1. "pixeng_fetchyuv2_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x18 8.--11. 1. "pixeng_fetchyuv2_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x18 0.--3. 1. "pixeng_fetchyuv2_ComponentBitsAlpha0,Alpha." line.long 0x1C "pixeng_fetchyuv2_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x1C 24.--28. 1. "pixeng_fetchyuv2_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x1C 16.--20. 1. "pixeng_fetchyuv2_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x1C 8.--12. 1. "pixeng_fetchyuv2_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x1C 0.--4. 1. "pixeng_fetchyuv2_ComponentShiftAlpha0,Alpha." line.long 0x20 "pixeng_fetchyuv2_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x20 16.--30. 1. "pixeng_fetchyuv2_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x20 0.--14. 1. "pixeng_fetchyuv2_LayerXOffset0,Horizontal offset (X)." line.long 0x24 "pixeng_fetchyuv2_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x24 16.--30. 1. "pixeng_fetchyuv2_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x24 0.--14. 1. "pixeng_fetchyuv2_ClipWindowXOffset0,Horizontal position (X)." line.long 0x28 "pixeng_fetchyuv2_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x28 16.--29. 1. "pixeng_fetchyuv2_ClipWindowHeight0,Height." newline hexmask.long.word 0x28 0.--13. 1. "pixeng_fetchyuv2_ClipWindowWidth0,Width." line.long 0x2C "pixeng_fetchyuv2_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x2C 24.--31. 1. "pixeng_fetchyuv2_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x2C 16.--23. 1. "pixeng_fetchyuv2_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x2C 8.--15. 1. "pixeng_fetchyuv2_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x2C 0.--7. 1. "pixeng_fetchyuv2_ConstantAlpha0,Alpha." line.long 0x30 "pixeng_fetchyuv2_LayerProperty0,Common properties of layer 0." bitfld.long 0x30 31. "pixeng_fetchyuv2_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x30 30. "pixeng_fetchyuv2_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x30 20. "pixeng_fetchyuv2_GammaRemoveEnable0,Value 1 enables the stage to remove a gamma from RGB components." "0,1" newline bitfld.long 0x30 17.--18. "pixeng_fetchyuv2_YUVConversionMode0,Enables different kind of YUV to RGB conversions." "0,1,2,3" newline bitfld.long 0x30 16. "pixeng_fetchyuv2_PremulConstRGB0,When enabled (value 1) the values given by ConstantRed/Green/Blue are used instead of alpha for source RGB pre-multiply." "0,1" newline bitfld.long 0x30 15. "pixeng_fetchyuv2_RGBAlphaTransEnable0,Value 1 enables transparent alpha (0 or 1 depending on RGB matching ConstantColor setting) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 14. "pixeng_fetchyuv2_RGBAlphaMaskEnable0,Value 1 enables mask alpha (read by another Fetch unit from a separate alpha layer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 13. "pixeng_fetchyuv2_RGBAlphaConstEnable0,Value 1 enables constant alpha (ConstAlpha fields) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 12. "pixeng_fetchyuv2_RGBAlphaSrcEnable0,Value 1 enables source alpha (stored together with color component in the source buffer) for RGB pre-multiply." "0,1" newline bitfld.long 0x30 11. "pixeng_fetchyuv2_AlphaTransEnable0,Value 1 enables transparent alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 10. "pixeng_fetchyuv2_AlphaMaskEnable0,Value 1 enables mask alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 9. "pixeng_fetchyuv2_AlphaConstEnable0,Value 1 enables constant alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 8. "pixeng_fetchyuv2_AlphaSrcEnable0,Value 1 enables source alpha for computing the output alpha." "0,1" newline bitfld.long 0x30 4.--5. "pixeng_fetchyuv2_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x240060++0xB line.long 0x0 "pixeng_fetchyuv2_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetchyuv2_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetchyuv2_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetchyuv2_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetchyuv2_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetchyuv2_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetchyuv2_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetchyuv2_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetchyuv2_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetchyuv2_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetchyuv2_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetchyuv2_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 13.--14. "pixeng_fetchyuv2_YUV420UpsamplingMode,Selects a method for vertical up-sampling of YUV 4:2:0 input data into YUV 4:2:2 data." "0,1,2,3" newline bitfld.long 0x8 11.--12. "pixeng_fetchyuv2_SecInputSelect,Selects function for the second frame input port." "0,1,2,3" newline bitfld.long 0x8 7. "pixeng_fetchyuv2_RawPixel,Raw pixel mode." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv2_ChromaHReplEn,Selects a method for vertical up-sampling of YUV 4:2:0 input data." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv2_YUV422UpsamplingMode,Selects a method for horizontal up-sampling of YUV 4:2:2/4:2:0 input data." "0,1" newline bitfld.long 0x8 3.--4. "pixeng_fetchyuv2_InputSelect,Selects function for the frame input port." "0,1,2,3" newline bitfld.long 0x8 0.--2. "pixeng_fetchyuv2_RasterMode,Selects a method how to generate source buffer sample points." "0,1,2,3,4,5,6,7" wgroup.long 0x24006C++0x7 line.long 0x0 "pixeng_fetchyuv2_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetchyuv2_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetchyuv2_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetchyuv2_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x240074++0xF line.long 0x0 "pixeng_fetchyuv2_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetchyuv2_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetchyuv2_ReadAddress0,Ring buffer synchronization for layer 0." hexmask.long 0x4 0.--31. 1. "pixeng_fetchyuv2_ReadAddress0,Last burst address that was read from the layer's source buffer." line.long 0x8 "pixeng_fetchyuv2_ReadAddressMSB0,Ring buffer synchronization for layer 0." hexmask.long.byte 0x8 0.--7. 1. "pixeng_fetchyuv2_ReadAddressMSB0,MSB bits of last burst address that was read from the layer's source buffer." line.long 0xC "pixeng_fetchyuv2_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0xC 8.--12. 1. "pixeng_fetchyuv2_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetchyuv2_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." group.long 0x240084++0x3 line.long 0x0 "pixeng_fetchyuv2_Status,Status informations." bitfld.long 0x0 4. "pixeng_fetchyuv2_ReadTimeout,Timeout detected when reading from the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" newline bitfld.long 0x0 0. "pixeng_fetchyuv2_WriteTimeout,Timeout detected when writing to the palette entries or shadow token trigger enables in fetchlayer derivate." "0,1" rgroup.long 0x240088++0xB line.long 0x0 "pixeng_fetchyuv2_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv2_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetchyuv2_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetchyuv2_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetchyuv2_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetchyuv2_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetchyuv2_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetchyuv2_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetchyuv2_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetchyuv2_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x241000++0x3 line.long 0x0 "pixeng_fetchyuv2cfg_fetchyuv2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetchyuv2cfg_fetchyuv2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x241004++0x3 line.long 0x0 "pixeng_fetchyuv2cfg_fetchyuv2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetchyuv2cfg_fetchyuv2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetchyuv2cfg_fetchyuv2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetchyuv2cfg_fetchyuv2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x241008++0x3 line.long 0x0 "pixeng_fetchyuv2cfg_fetchyuv2_Dynamic,Dynamic pixel engine configuration for fetchyuv2" hexmask.long.byte 0x0 8.--13. 1. "pixeng_fetchyuv2cfg_fetchyuv2_sec_sel,Selection of the source for the sec input of the fetchyuv2 module" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_fetchyuv2cfg_fetchyuv2_src_sel,Selection of the source for the src input of the fetchyuv2 module" rgroup.long 0x24100C++0x3 line.long 0x0 "pixeng_fetchyuv2cfg_fetchyuv2_Status,Status information for pixel engine configuration of fetchyuv2" bitfld.long 0x0 16.--18. "pixeng_fetchyuv2cfg_fetchyuv2_sel,Status of the connection of the fetchyuv2 module" "0,1,2,3,4,5,6,7" wgroup.long 0x250000++0x3 line.long 0x0 "pixeng_fetcheco2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x250004++0x3 line.long 0x0 "pixeng_fetcheco2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x250008++0x3B line.long 0x0 "pixeng_fetcheco2_StaticControl,Common static control options." bitfld.long 0x0 0. "pixeng_fetcheco2_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_fetcheco2_BurstBufferManagement,AXI interface buffer management register" bitfld.long 0x4 30. "pixeng_fetcheco2_CombinerLineFlush_Enable,Enable Burst combiner Line end flush." "0,1" newline bitfld.long 0x4 29. "pixeng_fetcheco2_CombinerTimeout_Enable,Enable Burst combiner Timeout." "0,1" newline hexmask.long.byte 0x4 21.--28. 1. "pixeng_fetcheco2_CombinerTimeout,Timeout value in 1024 * AXI cycles after this the read request is issued and not waited for more burst data." newline hexmask.long.byte 0x4 13.--20. 1. "pixeng_fetcheco2_SetMaxBurstLength,Set this to the (maxium_burst_length - 1) that should be used on the AXI interface after combining dedicated bursts to a single burst." newline hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco2_SetBurstLength,Set this to the burst length that should be used on the AXI interface." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco2_SetNumBuffers,Set this to the number of bursts that should be buffered." line.long 0x8 "pixeng_fetcheco2_BaseAddress0,Source buffer base address of layer 0." hexmask.long 0x8 0.--31. 1. "pixeng_fetcheco2_BaseAddress0,Byte aligned start address of the layer source buffer." line.long 0xC "pixeng_fetcheco2_BaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0xC 0.--7. 1. "pixeng_fetcheco2_BaseAddressMSB0,MSB bits of byte aligned start address of the layer source buffer." line.long 0x10 "pixeng_fetcheco2_AutoUpdateBaseAddress0,Source buffer base address of layer 0." hexmask.long 0x10 0.--31. 1. "pixeng_fetcheco2_AutoUpdateBaseAddress0,AutoUpdateBaseAddress0 is updated when AutoUpdateBaseAddressMSB0 is written." line.long 0x14 "pixeng_fetcheco2_AutoUpdateBaseAddressMSB0,Source buffer base address of layer 0." hexmask.long.byte 0x14 0.--7. 1. "pixeng_fetcheco2_AutoUpdateBaseAddressMSB0,AutoUpdateBaseAddress used with next framestart if BaseAddressAutoUpdate feature is enabled." line.long 0x18 "pixeng_fetcheco2_SourceBufferAttributes0,Source buffer attributes for layer 0." bitfld.long 0x18 31. "pixeng_fetcheco2_DWordByteSwap0,Swap the Bytes within one DWord after reading from memory." "0,1" newline bitfld.long 0x18 30. "pixeng_fetcheco2_BaseAddressAutoUpdate0,Enable flag for continuous shadow load of AutoUpdateBaseAddress0." "0,1" newline hexmask.long.byte 0x18 16.--21. 1. "pixeng_fetcheco2_BitsPerPixel0,Number of bits per pixel in the source buffer." newline hexmask.long.word 0x18 0.--15. 1. "pixeng_fetcheco2_Stride0,Source buffer stride of the layer in bytes minus one used for address generation." line.long 0x1C "pixeng_fetcheco2_SourceBufferDimension0,Source buffer dimension of layer 0." hexmask.long.word 0x1C 16.--29. 1. "pixeng_fetcheco2_LineCount0,Number of lines of the source buffer of the layer minus one." newline hexmask.long.word 0x1C 0.--13. 1. "pixeng_fetcheco2_LineWidth0,Width of the source buffer of the layer in pixels minus one." line.long 0x20 "pixeng_fetcheco2_ColorComponentBits0,Size of color components for RGB. YUV and index formats (layer 0)." bitfld.long 0x20 31. "pixeng_fetcheco2_ITUFormat0,When ComponentBitsRed/Green/Blue is set to 10 and this mode enabled (value 1) then input format is considered 8." "0,1" newline hexmask.long.byte 0x20 24.--27. 1. "pixeng_fetcheco2_ComponentBitsRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x20 16.--19. 1. "pixeng_fetcheco2_ComponentBitsGreen0,Green and U (chroma)." newline hexmask.long.byte 0x20 8.--11. 1. "pixeng_fetcheco2_ComponentBitsBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x20 0.--3. 1. "pixeng_fetcheco2_ComponentBitsAlpha0,Alpha." line.long 0x24 "pixeng_fetcheco2_ColorComponentShift0,Bit position of color components for RGB. YUV and index formats (layer 0)." hexmask.long.byte 0x24 24.--28. 1. "pixeng_fetcheco2_ComponentShiftRed0,Red Y (luma) and palette index." newline hexmask.long.byte 0x24 16.--20. 1. "pixeng_fetcheco2_ComponentShiftGreen0,Green and U (chroma)." newline hexmask.long.byte 0x24 8.--12. 1. "pixeng_fetcheco2_ComponentShiftBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x24 0.--4. 1. "pixeng_fetcheco2_ComponentShiftAlpha0,Alpha." line.long 0x28 "pixeng_fetcheco2_LayerOffset0,Position of layer 0 within the destination frame." hexmask.long.word 0x28 16.--30. 1. "pixeng_fetcheco2_LayerYOffset0,Vertical offset (Y)." newline hexmask.long.word 0x28 0.--14. 1. "pixeng_fetcheco2_LayerXOffset0,Horizontal offset (X)." line.long 0x2C "pixeng_fetcheco2_ClipWindowOffset0,Clip window position for layer 0." hexmask.long.word 0x2C 16.--30. 1. "pixeng_fetcheco2_ClipWindowYOffset0,Vertical position (Y)." newline hexmask.long.word 0x2C 0.--14. 1. "pixeng_fetcheco2_ClipWindowXOffset0,Horizontal position (X)." line.long 0x30 "pixeng_fetcheco2_ClipWindowDimensions0,Clip window size for layer 0." hexmask.long.word 0x30 16.--29. 1. "pixeng_fetcheco2_ClipWindowHeight0,Height." newline hexmask.long.word 0x30 0.--13. 1. "pixeng_fetcheco2_ClipWindowWidth0,Width." line.long 0x34 "pixeng_fetcheco2_ConstantColor0,Constant color for layer 0." hexmask.long.byte 0x34 24.--31. 1. "pixeng_fetcheco2_ConstantRed0,Red and Y (luma)." newline hexmask.long.byte 0x34 16.--23. 1. "pixeng_fetcheco2_ConstantGreen0,Green and U (chroma)." newline hexmask.long.byte 0x34 8.--15. 1. "pixeng_fetcheco2_ConstantBlue0,Blue and V (chroma)." newline hexmask.long.byte 0x34 0.--7. 1. "pixeng_fetcheco2_ConstantAlpha0,Alpha." line.long 0x38 "pixeng_fetcheco2_LayerProperty0,Common properties of layer 0." bitfld.long 0x38 31. "pixeng_fetcheco2_SourceBufferEnable0,Value 1 enables the source buffer for this layer." "0,1" newline bitfld.long 0x38 30. "pixeng_fetcheco2_ClipWindowEnable0,Value 1 enables the clip window for this layer." "0,1" newline bitfld.long 0x38 4.--5. "pixeng_fetcheco2_TileMode0,Select the tile mode for pixels outside the source buffer." "0,1,2,3" group.long 0x250048++0xB line.long 0x0 "pixeng_fetcheco2_FrameDimensions,Output frame dimension." bitfld.long 0x0 31. "pixeng_fetcheco2_EmptyFrame,When enabled output frame is empty." "0,1" newline hexmask.long.word 0x0 16.--29. 1. "pixeng_fetcheco2_FrameHeight,Frame height minus one." newline hexmask.long.word 0x0 0.--13. 1. "pixeng_fetcheco2_FrameWidth,Frame width minus one." line.long 0x4 "pixeng_fetcheco2_FrameResampling,Resampling options for output frame." bitfld.long 0x4 24. "pixeng_fetcheco2_SwapDirection,Swaps X and Y directions for re-sampling." "0,1" newline hexmask.long.byte 0x4 18.--23. 1. "pixeng_fetcheco2_DeltaY,Increment of Y coordinate for vertical step in destination frame." newline hexmask.long.byte 0x4 12.--17. 1. "pixeng_fetcheco2_DeltaX,Increment of X coordinate for horizontal step in destination frame." newline hexmask.long.byte 0x4 6.--11. 1. "pixeng_fetcheco2_StartY,Y coordinate of first sample point relative to origin." newline hexmask.long.byte 0x4 0.--5. 1. "pixeng_fetcheco2_StartX,X coordinate of first sample point relative to origin." line.long 0x8 "pixeng_fetcheco2_Control,Shared common control settings for all layers." bitfld.long 0x8 16. "pixeng_fetcheco2_ClipColor,Selects which color to take for pixels that do not lie inside the clip window of any layer." "0,1" newline bitfld.long 0x8 7. "pixeng_fetcheco2_RawPixel,Raw pixel mode." "0,1" wgroup.long 0x250054++0x7 line.long 0x0 "pixeng_fetcheco2_ControlTrigger,Shadow load trigger." bitfld.long 0x0 0. "pixeng_fetcheco2_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" line.long 0x4 "pixeng_fetcheco2_Start,Frame start trigger." bitfld.long 0x4 0. "pixeng_fetcheco2_Start,Writing a 1 to this field will start generating one frame (for debugging purposes only)." "0,1" rgroup.long 0x25005C++0x7 line.long 0x0 "pixeng_fetcheco2_FetchType,Fetch unit type." hexmask.long.byte 0x0 0.--3. 1. "pixeng_fetcheco2_FetchType,This field can be used to determine what kind of fetch unit this is." line.long 0x4 "pixeng_fetcheco2_BurstBufferProperties,Burst buffer properties." hexmask.long.byte 0x4 8.--12. 1. "pixeng_fetcheco2_BurstLengthForMaxBuffers,Maximum Burst Length that can be used when ManagedBurstBuffers burst buffers are used." newline hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco2_ManagedBurstBuffers,Maximum number of burst buffers that can be administrated in the AXI interface." rgroup.long 0x250068++0xB line.long 0x0 "pixeng_fetcheco2_CurBaseAddress0,Current Working BaseAddress for layer 0." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco2_CurBaseAddress0,Current Working BaseAddress for layer 0." line.long 0x4 "pixeng_fetcheco2_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." hexmask.long.byte 0x4 0.--7. 1. "pixeng_fetcheco2_CurBaseAddressMSB0,MSB bits of Current Working BaseAddress for layer 0." line.long 0x8 "pixeng_fetcheco2_HiddenStatus,Hidden status informations." bitfld.long 0x8 8. "pixeng_fetcheco2_ShadowStatus0,Shadow load status for layer0." "0,1" newline bitfld.long 0x8 6. "pixeng_fetcheco2_StatusComplete,Fetch unit completed all requested AXI transfers." "0,1" newline bitfld.long 0x8 5. "pixeng_fetcheco2_StatusRequest,Fetch unit requesting on the AXI interface waiting for acknowledge." "0,1" newline bitfld.long 0x8 4. "pixeng_fetcheco2_StatusBuffersIdle,AXI interface buffers are idle." "0,1" newline bitfld.long 0x8 0. "pixeng_fetcheco2_StatusBusy,Fetch unit is busy." "0,1" wgroup.long 0x251000++0x3 line.long 0x0 "pixeng_fetcheco2cfg_fetcheco2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_fetcheco2cfg_fetcheco2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x251004++0x7 line.long 0x0 "pixeng_fetcheco2cfg_fetcheco2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_fetcheco2cfg_fetcheco2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_fetcheco2cfg_fetcheco2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_fetcheco2cfg_fetcheco2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" line.long 0x4 "pixeng_fetcheco2cfg_fetcheco2_Status,Status information for pixel engine configuration of fetcheco2" bitfld.long 0x4 16.--18. "pixeng_fetcheco2cfg_fetcheco2_sel,Status of the connection of the fetcheco2 module" "0,1,2,3,4,5,6,7" wgroup.long 0x260000++0x3 line.long 0x0 "pixeng_matrix4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_matrix4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x260004++0x3 line.long 0x0 "pixeng_matrix4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_matrix4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_matrix4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_matrix4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x260008++0x2F line.long 0x0 "pixeng_matrix4_StaticControl,Color Matrix static control register" bitfld.long 0x0 0. "pixeng_matrix4_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "pixeng_matrix4_Control,Color Matrix control register" bitfld.long 0x4 5. "pixeng_matrix4_AlphaInvert,Value 1 inverts the effect of the alpha mask mode when enabled (pixels with alpha value greater or equal 0." "0,1" newline bitfld.long 0x4 4. "pixeng_matrix4_AlphaMask,Value 1 enables the alpha mask mode." "0,1" newline bitfld.long 0x4 0.--1. "pixeng_matrix4_MODE,Operation mode for color matrix" "0,1,2,3" line.long 0x8 "pixeng_matrix4_Red0,Matrix values for calculation of the red output value." hexmask.long.word 0x8 16.--28. 1. "pixeng_matrix4_A12,Value for green input." newline hexmask.long.word 0x8 0.--12. 1. "pixeng_matrix4_A11,Value for red input." line.long 0xC "pixeng_matrix4_Red1,Matrix values for calculation of the red output value." hexmask.long.word 0xC 16.--28. 1. "pixeng_matrix4_A14,Value for alpha input." newline hexmask.long.word 0xC 0.--12. 1. "pixeng_matrix4_A13,Value for blue input." line.long 0x10 "pixeng_matrix4_Green0,Matrix values for calculation of the green output value." hexmask.long.word 0x10 16.--28. 1. "pixeng_matrix4_A22,Value for green input." newline hexmask.long.word 0x10 0.--12. 1. "pixeng_matrix4_A21,Value for red input." line.long 0x14 "pixeng_matrix4_Green1,Matrix values for calculation of the green output value." hexmask.long.word 0x14 16.--28. 1. "pixeng_matrix4_A24,Value for alpha input." newline hexmask.long.word 0x14 0.--12. 1. "pixeng_matrix4_A23,Value for blue input." line.long 0x18 "pixeng_matrix4_Blue0,Matrix values for calculation of the blue output value." hexmask.long.word 0x18 16.--28. 1. "pixeng_matrix4_A32,Value for green input." newline hexmask.long.word 0x18 0.--12. 1. "pixeng_matrix4_A31,Value for red input." line.long 0x1C "pixeng_matrix4_Blue1,Matrix values for calculation of the blue output value." hexmask.long.word 0x1C 16.--28. 1. "pixeng_matrix4_A34,Value for alpha input." newline hexmask.long.word 0x1C 0.--12. 1. "pixeng_matrix4_A33,Value for blue input." line.long 0x20 "pixeng_matrix4_Alpha0,Matrix values for calculation of the alpha output value." hexmask.long.word 0x20 16.--28. 1. "pixeng_matrix4_A42,Value for green input." newline hexmask.long.word 0x20 0.--12. 1. "pixeng_matrix4_A41,Value for red input." line.long 0x24 "pixeng_matrix4_Alpha1,Matrix values for calculation of the alpha output value." hexmask.long.word 0x24 16.--28. 1. "pixeng_matrix4_A44,Value for alpha input." newline hexmask.long.word 0x24 0.--12. 1. "pixeng_matrix4_A43,Value for blue input." line.long 0x28 "pixeng_matrix4_OffsetVector0,Offset vectors for red and green output." hexmask.long.word 0x28 16.--28. 1. "pixeng_matrix4_C2,Green output offset." newline hexmask.long.word 0x28 0.--12. 1. "pixeng_matrix4_C1,Red output offset." line.long 0x2C "pixeng_matrix4_OffsetVector1,Offset vectors for blue and alpha output." hexmask.long.word 0x2C 16.--28. 1. "pixeng_matrix4_C4,Value is a twos complement used for 10bit color component." newline hexmask.long.word 0x2C 0.--12. 1. "pixeng_matrix4_C3,Blue output offset." rgroup.long 0x260038++0x3 line.long 0x0 "pixeng_matrix4_LastControlWord,Value of last received control word. for debugging." hexmask.long 0x0 0.--31. 1. "pixeng_matrix4_L_VAL,Value of last received control word." wgroup.long 0x261000++0x3 line.long 0x0 "pixeng_matrix4cfg_matrix4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_matrix4cfg_matrix4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x261004++0x3 line.long 0x0 "pixeng_matrix4cfg_matrix4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_matrix4cfg_matrix4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_matrix4cfg_matrix4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_matrix4cfg_matrix4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x261008++0x3 line.long 0x0 "pixeng_matrix4cfg_matrix4_Dynamic,Dynamic pixel engine configuration for matrix4" bitfld.long 0x0 24.--25. "pixeng_matrix4cfg_matrix4_clken,Enable of matrix4 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_matrix4cfg_matrix4_src_sel,Selection of the source for the src input of the matrix4 module" rgroup.long 0x26100C++0x3 line.long 0x0 "pixeng_matrix4cfg_matrix4_Status,Status information for pixel engine configuration of matrix4" bitfld.long 0x0 16.--18. "pixeng_matrix4cfg_matrix4_sel,Status of the connection of the matrix4 module" "0,1,2,3,4,5,6,7" wgroup.long 0x270000++0x3 line.long 0x0 "pixeng_hscaler4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_hscaler4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x270004++0x3 line.long 0x0 "pixeng_hscaler4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_hscaler4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_hscaler4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_hscaler4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x270008++0xF line.long 0x0 "pixeng_hscaler4_StaticControl,Static control settings that must typically be setup once only." bitfld.long 0x0 0. "pixeng_hscaler4_ShdEn,Shadow enable for RWS type configuration fields (0 = write-through 1 = shadows enabled)" "0: write-through,1: shadows enabled)" line.long 0x4 "pixeng_hscaler4_Setup1,Phase interpolator setup." hexmask.long.tbyte 0x4 0.--19. 1. "pixeng_hscaler4_scale_factor,Scale factor (unsigned fix-point 1." line.long 0x8 "pixeng_hscaler4_Setup2,Phase interpolator setup." hexmask.long.tbyte 0x8 0.--20. 1. "pixeng_hscaler4_phase_offset,Phase shift (signed fix-point 2." line.long 0xC "pixeng_hscaler4_Control,Scaler operation control." hexmask.long.word 0xC 16.--29. 1. "pixeng_hscaler4_output_size,Number of output pixel per input line." newline bitfld.long 0xC 8. "pixeng_hscaler4_filter_mode,Selects scaling filter algorithm." "0,1" newline bitfld.long 0xC 4. "pixeng_hscaler4_scale_mode,Scale mode." "0,1" newline bitfld.long 0xC 0. "pixeng_hscaler4_mode,Switches scaler on/off in datapath." "0,1" wgroup.long 0x271000++0x3 line.long 0x0 "pixeng_hscaler4cfg_hscaler4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_hscaler4cfg_hscaler4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x271004++0x3 line.long 0x0 "pixeng_hscaler4cfg_hscaler4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_hscaler4cfg_hscaler4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_hscaler4cfg_hscaler4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_hscaler4cfg_hscaler4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x271008++0x3 line.long 0x0 "pixeng_hscaler4cfg_hscaler4_Dynamic,Dynamic pixel engine configuration for hscaler4" bitfld.long 0x0 24.--25. "pixeng_hscaler4cfg_hscaler4_clken,Enable of hscaler4 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_hscaler4cfg_hscaler4_src_sel,Selection of the source for the src input of the hscaler4 module" rgroup.long 0x27100C++0x3 line.long 0x0 "pixeng_hscaler4cfg_hscaler4_Status,Status information for pixel engine configuration of hscaler4" bitfld.long 0x0 16.--18. "pixeng_hscaler4cfg_hscaler4_sel,Status of the connection of the hscaler4 module" "0,1,2,3,4,5,6,7" wgroup.long 0x280000++0x3 line.long 0x0 "pixeng_vscaler4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_vscaler4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x280004++0x3 line.long 0x0 "pixeng_vscaler4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_vscaler4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_vscaler4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_vscaler4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x280008++0xF line.long 0x0 "pixeng_vscaler4_StaticControl,Static control settings that must typically be setup once only." bitfld.long 0x0 0. "pixeng_vscaler4_ShdEn,Shadow enable for RWS type configuration fields (0 = write-through 1 = shadows enabled)" "0: write-through,1: shadows enabled)" line.long 0x4 "pixeng_vscaler4_Setup1,Phase interpolator setup." hexmask.long.tbyte 0x4 0.--19. 1. "pixeng_vscaler4_scale_factor,Scale factor (unsigned fix-point 1." line.long 0x8 "pixeng_vscaler4_Setup2,Phase interpolator setup. selected if input and output field polarity is 0." hexmask.long.tbyte 0x8 0.--20. 1. "pixeng_vscaler4_phase_offset,Phase shift (signed fix-point 2." line.long 0xC "pixeng_vscaler4_Control,Scaler operation control." hexmask.long.word 0xC 16.--29. 1. "pixeng_vscaler4_output_size,Number of output lines per input frame." newline bitfld.long 0xC 8. "pixeng_vscaler4_filter_mode,Scaling filter." "0,1" newline bitfld.long 0xC 4. "pixeng_vscaler4_scale_mode,Operation mode." "0,1" newline bitfld.long 0xC 0. "pixeng_vscaler4_mode,Operation mode." "0,1" wgroup.long 0x281000++0x3 line.long 0x0 "pixeng_vscaler4cfg_vscaler4_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "pixeng_vscaler4cfg_vscaler4_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x281004++0x3 line.long 0x0 "pixeng_vscaler4cfg_vscaler4_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "pixeng_vscaler4cfg_vscaler4_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "pixeng_vscaler4cfg_vscaler4_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "pixeng_vscaler4cfg_vscaler4_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x281008++0x3 line.long 0x0 "pixeng_vscaler4cfg_vscaler4_Dynamic,Dynamic pixel engine configuration for vscaler4" bitfld.long 0x0 24.--25. "pixeng_vscaler4cfg_vscaler4_clken,Enable of vscaler4 clock (this setting has to be the same for all modules of one processing pipeline)." "0,1,2,3" newline hexmask.long.byte 0x0 0.--5. 1. "pixeng_vscaler4cfg_vscaler4_src_sel,Selection of the source for the src input of the vscaler4 module" rgroup.long 0x28100C++0x3 line.long 0x0 "pixeng_vscaler4cfg_vscaler4_Status,Status information for pixel engine configuration of vscaler4" bitfld.long 0x0 16.--18. "pixeng_vscaler4cfg_vscaler4_sel,Status of the connection of the vscaler4 module" "0,1,2,3,4,5,6,7" wgroup.long 0x2A0000++0x3 line.long 0x0 "diseng_domainblend0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_domainblend0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2A0004++0x3 line.long 0x0 "diseng_domainblend0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_domainblend0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_domainblend0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_domainblend0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2A0008++0x3 line.long 0x0 "diseng_domainblend0_StaticControl,Static control settings." bitfld.long 0x0 4.--6. "diseng_domainblend0_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 1.--3. "diseng_domainblend0_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "diseng_domainblend0_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" wgroup.long 0x2A000C++0x3 line.long 0x0 "diseng_domainblend0_ControlTrigger,Shadow load and sequence complete triggers." bitfld.long 0x0 1. "diseng_domainblend0_Trigger_Sequence_Complete,By writing a '1' to this register field you can trigger the sequence complete interrupt that will occur as soon as the pipeline is empty." "0,1" newline bitfld.long 0x0 0. "diseng_domainblend0_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" group.long 0x2A0010++0xB line.long 0x0 "diseng_domainblend0_ModeControl,Operation mode of the domainblend" bitfld.long 0x0 0.--1. "diseng_domainblend0_MODE,Operation mode." "0,1,2,3" line.long 0x4 "diseng_domainblend0_AlphaControl,Alpha mask settings." bitfld.long 0x4 1.--3. "diseng_domainblend0_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 0. "diseng_domainblend0_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" line.long 0x8 "diseng_domainblend0_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "diseng_domainblend0_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "diseng_domainblend0_SEC_A_BLD_FUNC,Secondary input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "diseng_domainblend0_PRIM_A_BLD_FUNC,Primary input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "diseng_domainblend0_SEC_C_BLD_FUNC,Secondary input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "diseng_domainblend0_PRIM_C_BLD_FUNC,Primary input color blending function" "0,1,2,3,4,5,6,7" rgroup.long 0x2A001C++0x3 line.long 0x0 "diseng_domainblend0_Timeout_Feedback,The status of primary and secondary sources waiting for pixels." bitfld.long 0x0 1. "diseng_domainblend0_SecWait,Domainblend is waiting for secondary source pixel." "0,1" newline bitfld.long 0x0 0. "diseng_domainblend0_PrimWait,Domainblend is waiting for primary source pixel." "0,1" wgroup.long 0x2A0020++0x3 line.long 0x0 "diseng_domainblend0_Lockup_Clear,The register can be used to internally reset domainblend if it gets stuck by pending pixels from one source." bitfld.long 0x0 0. "diseng_domainblend0_LockupClear,Internal reset for the domainblend." "0,1" group.long 0x2A0024++0x3 line.long 0x0 "diseng_domainblend0_Delay_Counter_En,The register enables the delay and error counters that report on the delay on prim and sec sources." bitfld.long 0x0 0. "diseng_domainblend0_DelayCountEn,Enables the delay counters." "0,1" rgroup.long 0x2A0028++0x13 line.long 0x0 "diseng_domainblend0_Delay_Counter_Prim,The number of inavtive clock cycles during which the domainblend is waiting for pixels from primary source." hexmask.long 0x0 0.--27. 1. "diseng_domainblend0_DelayCountPrim,Primary delay counter value" line.long 0x4 "diseng_domainblend0_Delay_Counter_Sec,The number of inavtive clock cycles during which the domainblend is waiting for pixels from secondary source." hexmask.long 0x4 0.--27. 1. "diseng_domainblend0_DelayCountSec,Secondary delay counter value" line.long 0x8 "diseng_domainblend0_Error_Counter_Prim,The number of inavtive clock cycles on the primary source till the synchronization loss of domainblend." hexmask.long 0x8 0.--27. 1. "diseng_domainblend0_ErrCountPrim,Primary error counter value" line.long 0xC "diseng_domainblend0_Error_Counter_Sec,The number of inavtive clock cycles on the secondary source till the synchronization loss of domainblend." hexmask.long 0xC 0.--27. 1. "diseng_domainblend0_ErrCountSec,Secondary error counter value" line.long 0x10 "diseng_domainblend0_Source_Status,Source protocol error detection for primary and secondary sources" bitfld.long 0x10 2. "diseng_domainblend0_WrongInput,Neither command word nor pixel data is expected." "0,1" newline bitfld.long 0x10 1. "diseng_domainblend0_WrongPixelData,A pixel data is received when a command word is expected." "0,1" newline bitfld.long 0x10 0. "diseng_domainblend0_WrongCommandWord,A command word is received when a pixel data is expected." "0,1" wgroup.long 0x2A003C++0x3 line.long 0x0 "diseng_domainblend0_Source_Status_Clear,Clearing source protocol error status for both primary and secondary sources" bitfld.long 0x0 2. "diseng_domainblend0_ClearWrongInput,Clear the wrong input error status." "0,1" newline bitfld.long 0x0 1. "diseng_domainblend0_ClearWrongPixelData,Clear the wrong pixel data error status." "0,1" newline bitfld.long 0x0 0. "diseng_domainblend0_ClearWrongCommandWord,Clear the wrong command word error status." "0,1" rgroup.long 0x2A0040++0x7 line.long 0x0 "diseng_domainblend0_PrimControlWord,Value of last received primary control word. for debugging" hexmask.long 0x0 0.--31. 1. "diseng_domainblend0_P_VAL,Value of last received control word" line.long 0x4 "diseng_domainblend0_SecControlWord,Value of last received secondary control word. for debugging" hexmask.long 0x4 0.--31. 1. "diseng_domainblend0_S_VAL,Value of last received control word" wgroup.long 0x2B0000++0x3 line.long 0x0 "diseng_framegen0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_framegen0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2B0004++0x3 line.long 0x0 "diseng_framegen0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_framegen0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_framegen0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_framegen0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2B0008++0x87 line.long 0x0 "diseng_framegen0_FgStCtrl,FrameGen Static Control Register" bitfld.long 0x0 30. "diseng_framegen0_Force_Disable,Force a Disable of Framegen." "0,1" newline bitfld.long 0x0 4. "diseng_framegen0_FgShdTokGenSyncMode,Determines the mode for the shadow token generation." "0,1" newline bitfld.long 0x0 1.--3. "diseng_framegen0_FgSyncMode,Determines the operating mode of the framegen unit for side-by-side synchronization." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "diseng_framegen0_ShdEn,Enables shadowing for RWS type configuration fields." "0,1" line.long 0x4 "diseng_framegen0_HtCfg1,FrameGen Horizontal Timing Config Register 1" hexmask.long.word 0x4 16.--29. 1. "diseng_framegen0_Htotal,Total horizontal size of frame in pixels." newline hexmask.long.word 0x4 0.--13. 1. "diseng_framegen0_Hact,Horizontal size of active display area in pixels." line.long 0x8 "diseng_framegen0_HtCfg2,FrameGen Horizontal Timing Config Register 2" bitfld.long 0x8 31. "diseng_framegen0_HsEn,Enables generation of HSYNC pulse." "0,1" newline hexmask.long.word 0x8 16.--29. 1. "diseng_framegen0_Hsbp,Width of HSYNC pulse plus width of horizontal back porch in pixels." newline hexmask.long.word 0x8 0.--13. 1. "diseng_framegen0_Hsync,Width of HSYNC pulse in pixels." line.long 0xC "diseng_framegen0_VtCfg1,FrameGen Vertical Timing Config Register 1" hexmask.long.word 0xC 16.--29. 1. "diseng_framegen0_Vtotal,Total vertical size of frame in lines." newline hexmask.long.word 0xC 0.--13. 1. "diseng_framegen0_Vact,Vertical size of active display area in lines." line.long 0x10 "diseng_framegen0_VtCfg2,FrameGen Vertical Timing Config Register 2" bitfld.long 0x10 31. "diseng_framegen0_VsEn,Enables generation of VSYNC pulse." "0,1" newline hexmask.long.word 0x10 16.--29. 1. "diseng_framegen0_Vsbp,Width of VSYNC pulse plus width of vertical back porch in lines." newline hexmask.long.word 0x10 0.--13. 1. "diseng_framegen0_Vsync,Width of VSYNC pulse in lines." line.long 0x14 "diseng_framegen0_Int0Config,Coordinates of the trigger point for generation of the Int0 interrupt signal" bitfld.long 0x14 31. "diseng_framegen0_Int0En,Enables Int0." "0,1" newline hexmask.long.word 0x14 16.--29. 1. "diseng_framegen0_Int0Row,Specifies on which row of the display raster the Int0 signal is triggered (1 ." newline bitfld.long 0x14 15. "diseng_framegen0_Int0HsEn,When enabled Int0Row setting is ignored so that the interrupt occurs every line at position given by Int0Col." "0,1" newline hexmask.long.word 0x14 0.--13. 1. "diseng_framegen0_Int0Col,Specifies on which column of the display raster the Int0 signal is triggered (1 ." line.long 0x18 "diseng_framegen0_Int1Config,Coordinates of the trigger point for generation of the Int1 interrupt signal" bitfld.long 0x18 31. "diseng_framegen0_Int1En,Enables Int1 (irq[1])." "0,1" newline hexmask.long.word 0x18 16.--29. 1. "diseng_framegen0_Int1Row,Specifies on which row of the display raster the Int1 signal is triggered (1 ." newline bitfld.long 0x18 15. "diseng_framegen0_Int1HsEn,When enabled Int1Row setting is ignored so that the interrupt occurs every line at position given by Int1Col." "0,1" newline hexmask.long.word 0x18 0.--13. 1. "diseng_framegen0_Int1Col,Specifies on which column of the display raster the Int1 signal is triggered (1 ." line.long 0x1C "diseng_framegen0_Int2Config,Coordinates of the trigger point for generation of the Int2 interrupt signal" bitfld.long 0x1C 31. "diseng_framegen0_Int2En,Enables Int2." "0,1" newline hexmask.long.word 0x1C 16.--29. 1. "diseng_framegen0_Int2Row,Specifies on which row of the display raster the Int2 signal is triggered (1 ." newline bitfld.long 0x1C 15. "diseng_framegen0_Int2HsEn,When enabled Int2Row setting is ignored so that the interrupt occurs every line at position given by Int2Col." "0,1" newline hexmask.long.word 0x1C 0.--13. 1. "diseng_framegen0_Int2Col,Specifies on which column of the display raster the Int2 signal is triggered (1 ." line.long 0x20 "diseng_framegen0_Int3Config,Coordinates of the trigger point for generation of the Int3 interrupt signal" bitfld.long 0x20 31. "diseng_framegen0_Int3En,Enables Int3." "0,1" newline hexmask.long.word 0x20 16.--29. 1. "diseng_framegen0_Int3Row,Specifies on which row of the display raster the Int3 signal is triggered (1 ." newline bitfld.long 0x20 15. "diseng_framegen0_Int3HsEn,When enabled Int3Row setting is ignored so that the interrupt occurs every line at position given by Int3Col." "0,1" newline hexmask.long.word 0x20 0.--13. 1. "diseng_framegen0_Int3Col,Specifies on which column of the display raster the Int3 signal is triggered (1 ." line.long 0x24 "diseng_framegen0_PKickConfig,Coordinates of the trigger point for generation of the primary kick signal" bitfld.long 0x24 31. "diseng_framegen0_PKickEn,Enables pkick signal." "0,1" newline hexmask.long.word 0x24 16.--29. 1. "diseng_framegen0_PKickRow,Specifies on which row of the display raster the pkick signal is triggered (1 ." newline bitfld.long 0x24 15. "diseng_framegen0_PKickInt0En,If enabled maps the primary kick signal (pkick) on the interrupt pin int0." "0,1" newline hexmask.long.word 0x24 0.--13. 1. "diseng_framegen0_PKickCol,Specifies on which column of the display raster the pkick signal is triggered (1 ." line.long 0x28 "diseng_framegen0_SKickConfig,Coordinates of the trigger point for generation of the secondary kick signal" bitfld.long 0x28 31. "diseng_framegen0_SKickEn,Enables generation of internal skick signal." "0,1" newline bitfld.long 0x28 30. "diseng_framegen0_SKickTrig,Select source for skick generation." "0,1" newline hexmask.long.word 0x28 16.--29. 1. "diseng_framegen0_SKickRow,Specifies on which row of the display raster the skick signal is triggered (1 ." newline bitfld.long 0x28 15. "diseng_framegen0_SKickInt1En,If enabled maps the secondary kick signal (skick) on the interrupt pin int1." "0,1" newline hexmask.long.word 0x28 0.--13. 1. "diseng_framegen0_SKickCol,Specifies on which column of the display raster the skick signal is triggered (1 ." line.long 0x2C "diseng_framegen0_SecStatConfig,Configuration register for controlling the behaviour of the SecSyncStat field in the FgSecChStat register." hexmask.long.byte 0x2C 8.--11. 1. "diseng_framegen0_LevSkewInRange,Number of continous frames the measured skew value shall be within the range defined by SyncRangeLow and SyncRangeHigh." newline hexmask.long.byte 0x2C 4.--7. 1. "diseng_framegen0_LevBadFrames,Not used." newline hexmask.long.byte 0x2C 0.--3. 1. "diseng_framegen0_LevGoodFrames,Number of continous correct frames that must be processed before SecSyncStat field goes 1 (in sync)." line.long 0x30 "diseng_framegen0_FgSRCR1,FrameGen Skew Regulation Control Register 1." bitfld.long 0x30 30.--31. "diseng_framegen0_CsSyncSel,Select of external synchronization sync protocol." "0,1,2,3" newline bitfld.long 0x30 13. "diseng_framegen0_SRExt,Enables synchronization of FrameGen timing to external capture source (Capture Sync Mode)." "0,1" newline bitfld.long 0x30 11.--12. "diseng_framegen0_SRClock_Mode,Synchronization mode of FrameGen timing with clock regulation." "0,1,2,3" newline bitfld.long 0x30 10. "diseng_framegen0_SREpOff,Disables the skew Extrapolation in blanking." "0,1" newline bitfld.long 0x30 9. "diseng_framegen0_SRDbgDisp,If enabled the pixels are displayed that are read from FIFO when secondary channel is not in sync yet." "0,1" newline bitfld.long 0x30 7.--8. "diseng_framegen0_SRQVal,If SRQAlign is enabled this field determines the fixed value of the two LSB bits of HTOTAL." "0,1,2,3" newline bitfld.long 0x30 6. "diseng_framegen0_SRQAlign,Enables alignment of HTOTAL to be a multiple of 4." "0,1" newline bitfld.long 0x30 5. "diseng_framegen0_SRFastSync,Fast Synchronization Mode." "0,1" newline bitfld.long 0x30 4. "diseng_framegen0_SREven,Total line length HTOTAL is even when SRAdj is enabled." "0,1" newline bitfld.long 0x30 3. "diseng_framegen0_SRAdj,Enables line length adjustment for HTOTAL." "0,1" newline bitfld.long 0x30 1.--2. "diseng_framegen0_SRMode,Skew Control Operating Mode." "0,1,2,3" newline bitfld.long 0x30 0. "diseng_framegen0_SREn,If enabled skew control for secondary channel is active." "0,1" line.long 0x34 "diseng_framegen0_FgSRCR2,FrameGen Skew Regulation Control Register 2" hexmask.long.word 0x34 16.--29. 1. "diseng_framegen0_HTotalMax,Maximum value of htotal when horizontal regulation is enabled." newline hexmask.long.word 0x34 0.--13. 1. "diseng_framegen0_HTotalMin,Minimum value of htotal when horizontal regulation is enabled." line.long 0x38 "diseng_framegen0_FgSRCR3,FrameGen Skew Regulation Control Register 3" hexmask.long.word 0x38 16.--29. 1. "diseng_framegen0_VTotalMax,Maximum value of vtotal when vertical regulation is enabled." newline hexmask.long.word 0x38 0.--13. 1. "diseng_framegen0_VTotalMin,Minimum value of vtotal when vertical regulation is enabled." line.long 0x3C "diseng_framegen0_FgSRCR4,FrameGen Skew Regulation Control Register 4" hexmask.long 0x3C 0.--28. 1. "diseng_framegen0_TargetSkew,Horizontal target skew value for horizontal and vertical skew regulation (signed value)." line.long 0x40 "diseng_framegen0_FgSRCR5,FrameGen Skew Regulation Control Register 5" hexmask.long 0x40 0.--28. 1. "diseng_framegen0_SyncRangeLow,Sync range of horizontal and vertical skew regulation." line.long 0x44 "diseng_framegen0_FgSRCR6,FrameGen Skew Regulation Control Register 6" hexmask.long 0x44 0.--28. 1. "diseng_framegen0_SyncRangeHigh,Sync range of horizontal and vertical skew regulation." line.long 0x48 "diseng_framegen0_FgSRCR7,FrameGen Skew Regulation Control Register 7" hexmask.long.byte 0x48 27.--31. 1. "diseng_framegen0_VerticalIncrement,Vertical increment between two synchronization trigger points." newline hexmask.long 0x48 0.--26. 1. "diseng_framegen0_HorizontalIncrement,Horizontal increment between two synchronization trigger points." line.long 0x4C "diseng_framegen0_FgSRCR8,FrameGen Skew Regulation Control Register 8" hexmask.long.tbyte 0x4C 0.--17. 1. "diseng_framegen0_StartOffset,Pixel Offset between the frist pixel of the pipeline and the regulation start of the external timing input." line.long 0x50 "diseng_framegen0_FgSRCR9,FrameGen Skew Regulation Control Register 9" hexmask.long.tbyte 0x50 0.--19. 1. "diseng_framegen0_clockperiod_ref,Reference clock period for clock regulation." line.long 0x54 "diseng_framegen0_FgSRCR10,FrameGen Skew Regulation Control Register 10" hexmask.long.tbyte 0x54 0.--19. 1. "diseng_framegen0_clockperiod_min,Minimum clock period for clock regulation." line.long 0x58 "diseng_framegen0_FgSRCR11,FrameGen Skew Regulation Control Register 11" hexmask.long.tbyte 0x58 0.--19. 1. "diseng_framegen0_clockperiod_max,Maximum clock period for clock regulation." line.long 0x5C "diseng_framegen0_FgSRCR12,FrameGen Skew Regulation Control Register 12" hexmask.long 0x5C 0.--31. 1. "diseng_framegen0_pixel_period,Input pixel period of one output pixel (fixed point value 8." line.long 0x60 "diseng_framegen0_FgSRCR13,FrameGen Skew Regulation Control Register 13" bitfld.long 0x60 7. "diseng_framegen0_CMSyncSel,Select of clock measurement sync protocol." "0,1" newline bitfld.long 0x60 4.--6. "diseng_framegen0_CSR_updaterate,Update rate for clock measurement." "0,1,2,3,4,5,6,7" newline bitfld.long 0x60 2.--3. "diseng_framegen0_CSR_filterrate,Filter of clock measurement results." "0,1,2,3" line.long 0x64 "diseng_framegen0_FgSRCR14,FrameGen Skew Regulation Control Register 14" hexmask.long.word 0x64 16.--29. 1. "diseng_framegen0_SkewOffset_Threshold,Allowed Skew offset before skew regulation starts re-correcting." newline bitfld.long 0x64 12.--14. "diseng_framegen0_CSR_phasegainsync,Clock period offset for phase regulation." "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 8.--10. "diseng_framegen0_CSR_phasegain,Clock period offset for phase regulation." "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 7. "diseng_framegen0_CSR_ramprate_en,Enables ramp steps." "0,1" newline bitfld.long 0x64 4.--6. "diseng_framegen0_CSR_ramprate,Ramp step size for phase regulation." "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 3. "diseng_framegen0_CSR_SSCGTrack_en,Enables SSCG regulation." "0,1" newline bitfld.long 0x64 0. "diseng_framegen0_Clockperiod_val,Set this bit if the clockperiod registers from framegen are setup and valid." "0,1" line.long 0x68 "diseng_framegen0_FgSRCR15,FrameGen Skew Regulation Control Register 15" hexmask.long.word 0x68 16.--29. 1. "diseng_framegen0_CsDelay,Delay (in lines) between the first HSYNC of external capture timing " newline bitfld.long 0x68 15. "diseng_framegen0_CsVsPol,Polarity of VSYNC synchronization signal of external capture source." "0,1" newline bitfld.long 0x68 14. "diseng_framegen0_CsHsPol,Polarity of HSYNC synchronization signal of external capture source." "0,1" line.long 0x6C "diseng_framegen0_FgKSDR,FrameGen Kick System Debug Register" bitfld.long 0x6C 16.--18. "diseng_framegen0_SCntCplMax,Maximum Value for spendcnt_cpl_s complementary secondary kick counter." "0,1,2,3,4,5,6,7" newline bitfld.long 0x6C 0.--2. "diseng_framegen0_PCntCplMax,Maximum Value for ppendcnt_cpl_s complementary primary kick counter." "0,1,2,3,4,5,6,7" line.long 0x70 "diseng_framegen0_PaCfg,FrameGen Primary Area Config Register 1 (shadowed)" hexmask.long.word 0x70 16.--29. 1. "diseng_framegen0_Pstarty,Primary screen upper left corner y component." newline hexmask.long.word 0x70 0.--13. 1. "diseng_framegen0_Pstartx,Primary screen upper left corner x component." line.long 0x74 "diseng_framegen0_SaCfg,FrameGen Secondary Area Config Register 1 (shadowed)" hexmask.long.word 0x74 16.--29. 1. "diseng_framegen0_Sstarty,Secondary screen upper left corner y component." newline hexmask.long.word 0x74 0.--13. 1. "diseng_framegen0_Sstartx,Secondary screen upper left corner x component." line.long 0x78 "diseng_framegen0_FgInCtrl,FrameGen Input Control Register (shadowed)" bitfld.long 0x78 4. "diseng_framegen0_EnSecAlpha,When enabled alpha plane of secondary channel is considered for screen composition." "0,1" newline bitfld.long 0x78 3. "diseng_framegen0_EnPrimAlpha,When enabled alpha plane of primary channel is considered for screen composition." "0,1" newline bitfld.long 0x78 0.--2. "diseng_framegen0_FgDm,Frame Generator Display Mode." "0,1,2,3,4,5,6,7" line.long 0x7C "diseng_framegen0_FgInCtrlPanic,FrameGen Input Control Panic Register (shadowed)" bitfld.long 0x7C 4. "diseng_framegen0_EnSecAlphaPanic,When enabled alpha plane of secondary channel is considered for screen composition." "0,1" newline bitfld.long 0x7C 3. "diseng_framegen0_EnPrimAlphaPanic,When enabled alpha plane of primary channel is considered for screen composition." "0,1" newline bitfld.long 0x7C 0.--2. "diseng_framegen0_FgDmPanic,Frame Generator Display Mode when Panic Switch active." "0,1,2,3,4,5,6,7" line.long 0x80 "diseng_framegen0_FgCCR,FrameGen Constant Color Register (shadowed)" bitfld.long 0x80 30.--31. "diseng_framegen0_CcAlpha,Constant color - alpha value." "0,1,2,3" newline hexmask.long.word 0x80 20.--29. 1. "diseng_framegen0_CcRed,Constant color - red component." newline hexmask.long.word 0x80 10.--19. 1. "diseng_framegen0_CcGreen,Constant color - green component." newline hexmask.long.word 0x80 0.--9. 1. "diseng_framegen0_CcBlue,Constant color - blue component." line.long 0x84 "diseng_framegen0_FgEnable,FrameGen Enable Register" bitfld.long 0x84 0. "diseng_framegen0_FgEn,Frame Generator Enable." "0,1" wgroup.long 0x2B0090++0x3 line.long 0x0 "diseng_framegen0_FgSlr,FrameGen Shadow Load Register" bitfld.long 0x0 0. "diseng_framegen0_ShdTokGen,Generate shadow load token." "0,1" rgroup.long 0x2B0094++0xB line.long 0x0 "diseng_framegen0_FgEnSts,FrameGen Enable Status Register" bitfld.long 0x0 1. "diseng_framegen0_PanicStat,Current status of panic mode (0=normal operation mode 1=panic mode; not locked)." "0: normal operation mode,1: panic mode; not locked)" newline bitfld.long 0x0 0. "diseng_framegen0_EnSts,Indicates the current operating mode of the frame generator." "0,1" line.long 0x4 "diseng_framegen0_FgTimeStamp,Time stamp status." hexmask.long.tbyte 0x4 14.--31. 1. "diseng_framegen0_FrameIndex,Index of the output frame that is currently generated (starts with 0 after reset for first output frame)." newline hexmask.long.word 0x4 0.--13. 1. "diseng_framegen0_LineIndex,Index of the output line that is currently generated (starts with 0 for first active output line)." line.long 0x8 "diseng_framegen0_FgChStat,FrameGen Channel Status Register" bitfld.long 0x8 24. "diseng_framegen0_SecSyncStat,Current status secondary channel synchronization (0 = out of sync 1 = in sync; not locked)." "0: out of sync,1: in sync; not locked)" newline bitfld.long 0x8 17. "diseng_framegen0_SkewRangeErr,The secondary channel skew value has run out of the limit defined by SyncRangeLow and SyncRangeHigh." "0,1" newline bitfld.long 0x8 16. "diseng_framegen0_SFifoEmpty,Read request to empty secondary pixel FIFO detected." "0,1" newline bitfld.long 0x8 8. "diseng_framegen0_PrimSyncStat,Current status primary channel synchronization (0 = out of sync (frame tearing) 1 = in sync (normal operation); not locked)." "0: out of sync,1: in sync" newline bitfld.long 0x8 0. "diseng_framegen0_PFifoEmpty,Read request to empty primary pixel FIFO detected." "0,1" wgroup.long 0x2B00A0++0x3 line.long 0x0 "diseng_framegen0_FgChStatClr,FrameGen Channel Status Clear Register" bitfld.long 0x0 16. "diseng_framegen0_ClrSecStat,Clears SFifoEmpty and SkewRangeErr in FgChStat register." "0,1" newline bitfld.long 0x0 0. "diseng_framegen0_ClrPrimStat,Clears PFifoEmpty in FgChStat register." "0,1" rgroup.long 0x2B00A4++0xB line.long 0x0 "diseng_framegen0_FgSkewMon,FrameGen Skew Monitor Register for Secondary Channel Skew Control" hexmask.long 0x0 0.--28. 1. "diseng_framegen0_SkewMon,Current skew value monitor for secondary channel skew control." line.long 0x4 "diseng_framegen0_FgPFifoMin,FrameGen Primary FIFO Min Fill Register" hexmask.long.word 0x4 0.--15. 1. "diseng_framegen0_PFifoMin,Shows the minimal fill level of the primary channel pixel FIFO." line.long 0x8 "diseng_framegen0_FgPFifoMax,FrameGen Primary FIFO Max Fill Register" hexmask.long.word 0x8 0.--15. 1. "diseng_framegen0_PFifoMax,Shows the maximal fill level of the primary channel pixel FIFO." wgroup.long 0x2B00B0++0x3 line.long 0x0 "diseng_framegen0_FgPFifoFillClr,FrameGen Primary FIFO Fill Clear Register" bitfld.long 0x0 0. "diseng_framegen0_PFifoFillClr,Write for clearing register FgPFifoMin and FgPFifoMax." "0,1" group.long 0x2B00B4++0x3 line.long 0x0 "diseng_framegen0_FgPFifoTres,FrameGen Primary FIFO Thresholds" hexmask.long.word 0x0 16.--31. 1. "diseng_framegen0_PFifoTres1,Threshold value for primary channel pixel FIFO." newline hexmask.long.word 0x0 0.--15. 1. "diseng_framegen0_PFifoTres0,Threshold value for primary channel pixel FIFO." rgroup.long 0x2B00B8++0x7 line.long 0x0 "diseng_framegen0_FgSFifoMin,FrameGen Secondary FIFO Min Fill Register" hexmask.long.word 0x0 0.--15. 1. "diseng_framegen0_SFifoMin,Shows the minimal fill level of the secondary channel pixel FIFO." line.long 0x4 "diseng_framegen0_FgSFifoMax,FrameGen Secondary FIFO Max Fill Register" hexmask.long.word 0x4 0.--15. 1. "diseng_framegen0_SFifoMax,Shows the maximal fill level of the secondary channel pixel FIFO." wgroup.long 0x2B00C0++0x3 line.long 0x0 "diseng_framegen0_FgSFifoFillClr,FrameGen Secondary FIFO Fill Clear Register" bitfld.long 0x0 0. "diseng_framegen0_SFifoFillClr,Write for clearing register FgSFifoMin and FgSFifoMax." "0,1" rgroup.long 0x2B00C4++0x13 line.long 0x0 "diseng_framegen0_FgSrEpD,FrameGen Skew Regulation ExtraPolation Debug Register" hexmask.long 0x0 0.--28. 1. "diseng_framegen0_EpVal,Calculated value for line skew extrapolation in blanking." line.long 0x4 "diseng_framegen0_FgSrFtD,FrameGen Skew Regulation Frame Total Debug Register" hexmask.long 0x4 0.--27. 1. "diseng_framegen0_FrTot,Measured value for frame total measured in display clock cycles." line.long 0x8 "diseng_framegen0_FgSrCSHTotal,FrameGen Skew Regulation External Sync HTotal Debug Register" hexmask.long 0x8 0.--31. 1. "diseng_framegen0_FrCSHTotal,Measured value for capture sync input htotal." line.long 0xC "diseng_framegen0_FgSrClockDiv,FrameGen Skew Regulation External PLL Clock divider" hexmask.long.tbyte 0xC 0.--19. 1. "diseng_framegen0_FrClockDiv,Measured value for PLL clock divider from clock measurement." line.long 0x10 "diseng_framegen0_FgSl,FrameGen Scanline Register" bitfld.long 0x10 31. "diseng_framegen0_VBlank,Indicates whether the current read scanline is in vertical blanking." "0,1" newline hexmask.long.word 0x10 0.--13. 1. "diseng_framegen0_ScanLine,Reads current scanline of framegen display timing." wgroup.long 0x2C0000++0x3 line.long 0x0 "diseng_idhash0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_idhash0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2C0004++0x3 line.long 0x0 "diseng_idhash0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_idhash0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_idhash0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_idhash0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2C0008++0x13 line.long 0x0 "diseng_idhash0_StaticControl,Global configuration" bitfld.long 0x0 4. "diseng_idhash0_ShdLdSel,Source select for events that will load shadow registers into the active configuration" "0,1" newline bitfld.long 0x0 0. "diseng_idhash0_EnCalc,When enabled (value 1) the Idhash is calculated and stored in memory." "0,1" line.long 0x4 "diseng_idhash0_PanicThreshold,Set and reset thresholds applying to Window_Panic interrupts and status bits" hexmask.long.byte 0x4 16.--23. 1. "diseng_idhash0_PanicThresReset,Number of consecutive 'MATCH' frames before resetting respective Window Panic bit" newline hexmask.long.byte 0x4 0.--7. 1. "diseng_idhash0_PanicThres,Number of 'ERROR' frames before generating panic interrupt and asserting respective Window Panic status bit" line.long 0x8 "diseng_idhash0_PanicColor,Overlay color for evaluation windows in panic mode" bitfld.long 0x8 30.--31. "diseng_idhash0_PanicAlpha,Alpha mask bit" "0,1,2,3" newline hexmask.long.byte 0x8 22.--29. 1. "diseng_idhash0_PanicRed,Red color component" newline hexmask.long.byte 0x8 12.--19. 1. "diseng_idhash0_PanicGreen,Green color component" newline hexmask.long.byte 0x8 2.--9. 1. "diseng_idhash0_PanicBlue,Blue color component" line.long 0xC "diseng_idhash0_ShadowLoad,Shadow load control register" hexmask.long.byte 0xC 24.--31. 1. "diseng_idhash0_SetupID,ID which can be used to identify the setup." newline hexmask.long.byte 0xC 0.--3. 1. "diseng_idhash0_ShdLdReq,Shadow load request for each evaluation window (bit index = window index)" line.long 0x10 "diseng_idhash0_ContinuousMode,Idhash operation mode control" bitfld.long 0x10 0. "diseng_idhash0_EnCont,EnCont = 0: disables continuous mode" "0: disables continuous mode,?" rgroup.long 0x2C001C++0x3 line.long 0x0 "diseng_idhash0_Idhash_Status,Idhash status" bitfld.long 0x0 0. "diseng_idhash0_IdhashState,Run state of the module" "0,1" group.long 0x2C0020++0xE3 line.long 0x0 "diseng_idhash0_Run_Status,Idhash evaluation status" hexmask.long.byte 0x0 24.--31. 1. "diseng_idhash0_ResultSetupID,SetupID which was used for this result." newline bitfld.long 0x0 16. "diseng_idhash0_IdhashValid,Measured Idhash values are valid" "0,1" newline hexmask.long.byte 0x0 8.--11. 1. "diseng_idhash0_Window_Panic,Panic status bits for all evaluation windows (bit index = window index)" newline hexmask.long.byte 0x0 0.--3. 1. "diseng_idhash0_Window_Error,Error status bits for all evaluation windows (bit index = window index)" line.long 0x4 "diseng_idhash0_Control_Window0,Window 0. Control settings" bitfld.long 0x4 24. "diseng_idhash0_GlobalPanic_Window0,When enabled (value 1) the panic status of this window (Window_Panic bit0) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response." "0,1" newline hexmask.long.byte 0x4 16.--19. 1. "diseng_idhash0_LocalPanic_Window0,When enabled Bit0 (value 1) a panic status of Window 0 will replace all pixels inside this window (Window0) by a constant color on the display." newline bitfld.long 0x4 10. "diseng_idhash0_AlphaSel_Window0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x4 9. "diseng_idhash0_AlphaInv_Window0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x4 8. "diseng_idhash0_AlphaMask_Window0,When enabled (value 1) pixels with alpha bit = 0 are ignored for Idhash computation" "0,1" newline bitfld.long 0x4 0.--2. "diseng_idhash0_Mode_Window0,Defines the operation mode of this window." "0,1,2,3,4,5,6,7" line.long 0x8 "diseng_idhash0_UpperLeft_Window0,Window 0. Upper Left Coordinates" hexmask.long.word 0x8 16.--29. 1. "diseng_idhash0_UpperLeft_Y_Window0,Y coordinate" newline hexmask.long.word 0x8 0.--13. 1. "diseng_idhash0_UpperLeft_X_Window0,X coordinate" line.long 0xC "diseng_idhash0_LowerRight_Window0,Window 0. Lower Right Coordinates" hexmask.long.word 0xC 16.--29. 1. "diseng_idhash0_LowerRight_Y_Window0,Y coordinate" newline hexmask.long.word 0xC 0.--13. 1. "diseng_idhash0_LowerRight_X_Window0,X coordinate" line.long 0x10 "diseng_idhash0_Tile_Window0,Window 0. Tile dimensions" hexmask.long.byte 0x10 4.--7. 1. "diseng_idhash0_Tile_Y_Window0,Y tile size - 1 i." newline hexmask.long.byte 0x10 0.--3. 1. "diseng_idhash0_Tile_X_Window0,X tile size - 1 i." line.long 0x14 "diseng_idhash0_Address_Window0,Window 0. Memory word Address for Idhash" hexmask.long.word 0x14 2.--11. 1. "diseng_idhash0_Address_Window0,Window 0 Memory word Address for Idhash" line.long 0x18 "diseng_idhash0_Config_Window0,Window 0. Idhash Configuration settings" hexmask.long.byte 0x18 24.--31. 1. "diseng_idhash0_RGB_Th_Window0,Threshold for RGB mode." newline hexmask.long.byte 0x18 16.--23. 1. "diseng_idhash0_Tolerance_Window0,Tolerance Level" newline hexmask.long.byte 0x18 8.--15. 1. "diseng_idhash0_Th_BG_Window0,Threshold value for background color component range." newline hexmask.long.byte 0x18 0.--7. 1. "diseng_idhash0_Th_FG_Window0,Threshold value for foreground color component range." line.long 0x1C "diseng_idhash0_Limits_Window0,Window 0. check Limit settings" hexmask.long.word 0x1C 16.--29. 1. "diseng_idhash0_Drop_cnt_SumLimit_Window0,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x1C 0.--13. 1. "diseng_idhash0_FG_cnt_SumLimit_Window0,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x20 "diseng_idhash0_Foreground0_Window0,Window 0. Foregound 0 Color settings." hexmask.long.byte 0x20 24.--31. 1. "diseng_idhash0_Foreground0_Red_Window0,Red color of foreground 0" newline hexmask.long.byte 0x20 16.--23. 1. "diseng_idhash0_Foreground0_Green_Window0,Green color of foreground 0" newline hexmask.long.byte 0x20 8.--15. 1. "diseng_idhash0_Foreground0_Blue_Window0,Blue color of foreground 0" line.long 0x24 "diseng_idhash0_Foreground0_Limits_Window0,Window 0. check Limit settings for Telltale mode or for foreground color 0 in icon mode." hexmask.long.word 0x24 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg0Limit_Window0,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x24 0.--11. 1. "diseng_idhash0_FG_cnt_Fg0Limit_Window0,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x28 "diseng_idhash0_Foreground1_Window0,Window 0. Foregound 1 Color settings. Used for Icon Mode." hexmask.long.byte 0x28 24.--31. 1. "diseng_idhash0_Foreground1_Red_Window0,Red color of foreground 1" newline hexmask.long.byte 0x28 16.--23. 1. "diseng_idhash0_Foreground1_Green_Window0,Green color of foreground 1" newline hexmask.long.byte 0x28 8.--15. 1. "diseng_idhash0_Foreground1_Blue_Window0,Blue color of foreground 1" line.long 0x2C "diseng_idhash0_Foreground1_Limits_Window0,Window 0. check Limit settings for foreground color 1 in icon mode." hexmask.long.word 0x2C 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg1Limit_Window0,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x2C 0.--11. 1. "diseng_idhash0_FG_cnt_Fg1Limit_Window0,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x30 "diseng_idhash0_Foreground2_Window0,Window 0. Foregound 2 Color settings" hexmask.long.byte 0x30 24.--31. 1. "diseng_idhash0_Foreground2_Red_Window0,Red color of foreground 2" newline hexmask.long.byte 0x30 16.--23. 1. "diseng_idhash0_Foreground2_Green_Window0,Green color of foreground 2" newline hexmask.long.byte 0x30 8.--15. 1. "diseng_idhash0_Foreground2_Blue_Window0,Blue color of foreground 2" line.long 0x34 "diseng_idhash0_Foreground2_Limits_Window0,Window 0. check Limit settings for foreground color 2 in icon mode." hexmask.long.word 0x34 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg2Limit_Window0,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x34 0.--11. 1. "diseng_idhash0_FG_cnt_Fg2Limit_Window0,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x38 "diseng_idhash0_Idx_Table_Window0,Window 0. Index Table" bitfld.long 0x38 29. "diseng_idhash0_idx3_fg2_FG_BGn_Window0,Foreground 2 foreground background select for Index 3" "0,1" newline bitfld.long 0x38 28. "diseng_idhash0_idx3_fg2_EN_Window0,Foreground 2 Enable for Index 3" "0,1" newline bitfld.long 0x38 27. "diseng_idhash0_idx3_fg1_FG_BGn_Window0,Foreground 1 foreground background select for Index 3" "0,1" newline bitfld.long 0x38 26. "diseng_idhash0_idx3_fg1_EN_Window0,Foreground 1 Enable for Index 3" "0,1" newline bitfld.long 0x38 25. "diseng_idhash0_idx3_fg0_FG_BGn_Window0,Foreground 0 foreground background select for Index 3" "0,1" newline bitfld.long 0x38 24. "diseng_idhash0_idx3_fg0_EN_Window0,Foreground 0 Enable for Index 3" "0,1" newline bitfld.long 0x38 21. "diseng_idhash0_idx2_fg2_FG_BGn_Window0,Foreground 2 foreground background select for Index 2" "0,1" newline bitfld.long 0x38 20. "diseng_idhash0_idx2_fg2_EN_Window0,Foreground 2 Enable for Index 2" "0,1" newline bitfld.long 0x38 19. "diseng_idhash0_idx2_fg1_FG_BGn_Window0,Foreground 1 foreground background select for Index 2" "0,1" newline bitfld.long 0x38 18. "diseng_idhash0_idx2_fg1_EN_Window0,Foreground 1 Enable for Index 2" "0,1" newline bitfld.long 0x38 17. "diseng_idhash0_idx2_fg0_FG_BGn_Window0,Foreground 0 foreground background select for Index 2" "0,1" newline bitfld.long 0x38 16. "diseng_idhash0_idx2_fg0_EN_Window0,Foreground 0 Enable for Index 2" "0,1" newline bitfld.long 0x38 13. "diseng_idhash0_idx1_fg2_FG_BGn_Window0,Foreground 2 foreground background select for Index 1" "0,1" newline bitfld.long 0x38 12. "diseng_idhash0_idx1_fg2_EN_Window0,Foreground 2 Enable for Index 1" "0,1" newline bitfld.long 0x38 11. "diseng_idhash0_idx1_fg1_FG_BGn_Window0,Foreground 1 foreground background select for Index 1" "0,1" newline bitfld.long 0x38 10. "diseng_idhash0_idx1_fg1_EN_Window0,Foreground 1 Enable for Index 1" "0,1" newline bitfld.long 0x38 9. "diseng_idhash0_idx1_fg0_FG_BGn_Window0,Foreground 0 foreground background select for Index 1" "0,1" newline bitfld.long 0x38 8. "diseng_idhash0_idx1_fg0_EN_Window0,Foreground 0 Enable for Index 1" "0,1" newline bitfld.long 0x38 5. "diseng_idhash0_idx0_fg2_FG_BGn_Window0,Foreground 2 foreground background select for Index 0" "0,1" newline bitfld.long 0x38 4. "diseng_idhash0_idx0_fg2_EN_Window0,Foreground 2 Enable for Index 0" "0,1" newline bitfld.long 0x38 3. "diseng_idhash0_idx0_fg1_FG_BGn_Window0,Foreground 1 foreground background select for Index 0" "0,1" newline bitfld.long 0x38 2. "diseng_idhash0_idx0_fg1_EN_Window0,Foreground 1 Enable for Index 0" "0,1" newline bitfld.long 0x38 1. "diseng_idhash0_idx0_fg0_FG_BGn_Window0,Foreground 0 foreground background select for Index 0" "0,1" newline bitfld.long 0x38 0. "diseng_idhash0_idx0_fg0_EN_Window0,Foreground 0 Enable for Index 0" "0,1" line.long 0x3C "diseng_idhash0_Control_Window1,Window 1. Control settings" bitfld.long 0x3C 24. "diseng_idhash0_GlobalPanic_Window1,When enabled (value 1) the panic status of this window (Window_Panic bit1) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response." "0,1" newline hexmask.long.byte 0x3C 16.--19. 1. "diseng_idhash0_LocalPanic_Window1,When enabled Bit0 (value 1) a panic status of Window 0 will replace all pixels inside this window (Window1) by a constant color on the display." newline bitfld.long 0x3C 10. "diseng_idhash0_AlphaSel_Window1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x3C 9. "diseng_idhash0_AlphaInv_Window1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x3C 8. "diseng_idhash0_AlphaMask_Window1,When enabled (value 1) pixels with alpha bit = 0 are ignored for Idhash computation" "0,1" newline bitfld.long 0x3C 0.--2. "diseng_idhash0_Mode_Window1,Defines the operation mode of this window." "0,1,2,3,4,5,6,7" line.long 0x40 "diseng_idhash0_UpperLeft_Window1,Window 1. Upper Left Coordinates" hexmask.long.word 0x40 16.--29. 1. "diseng_idhash0_UpperLeft_Y_Window1,Y coordinate" newline hexmask.long.word 0x40 0.--13. 1. "diseng_idhash0_UpperLeft_X_Window1,X coordinate" line.long 0x44 "diseng_idhash0_LowerRight_Window1,Window 1. Lower Right Coordinates" hexmask.long.word 0x44 16.--29. 1. "diseng_idhash0_LowerRight_Y_Window1,Y coordinate" newline hexmask.long.word 0x44 0.--13. 1. "diseng_idhash0_LowerRight_X_Window1,X coordinate" line.long 0x48 "diseng_idhash0_Tile_Window1,Window 1. Tile dimensions" hexmask.long.byte 0x48 4.--7. 1. "diseng_idhash0_Tile_Y_Window1,Y tile size - 1 i." newline hexmask.long.byte 0x48 0.--3. 1. "diseng_idhash0_Tile_X_Window1,X tile size - 1 i." line.long 0x4C "diseng_idhash0_Address_Window1,Window 1. Memory word Address for Idhash" hexmask.long.word 0x4C 2.--11. 1. "diseng_idhash0_Address_Window1,Window 1 Memory word Address for Idhash" line.long 0x50 "diseng_idhash0_Config_Window1,Window 1. Idhash Configuration settings" hexmask.long.byte 0x50 24.--31. 1. "diseng_idhash0_RGB_Th_Window1,Threshold for RGB mode." newline hexmask.long.byte 0x50 16.--23. 1. "diseng_idhash0_Tolerance_Window1,Tolerance Level" newline hexmask.long.byte 0x50 8.--15. 1. "diseng_idhash0_Th_BG_Window1,Threshold value for background color component range." newline hexmask.long.byte 0x50 0.--7. 1. "diseng_idhash0_Th_FG_Window1,Threshold value for foreground color component range." line.long 0x54 "diseng_idhash0_Limits_Window1,Window 1. check Limit settings" hexmask.long.word 0x54 16.--29. 1. "diseng_idhash0_Drop_cnt_SumLimit_Window1,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x54 0.--13. 1. "diseng_idhash0_FG_cnt_SumLimit_Window1,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x58 "diseng_idhash0_Foreground0_Window1,Window 1. Foregound 0 Color settings." hexmask.long.byte 0x58 24.--31. 1. "diseng_idhash0_Foreground0_Red_Window1,Red color of foreground 0" newline hexmask.long.byte 0x58 16.--23. 1. "diseng_idhash0_Foreground0_Green_Window1,Green color of foreground 0" newline hexmask.long.byte 0x58 8.--15. 1. "diseng_idhash0_Foreground0_Blue_Window1,Blue color of foreground 0" line.long 0x5C "diseng_idhash0_Foreground0_Limits_Window1,Window 1. check Limit settings for Telltale mode or for foreground color 0 in icon mode." hexmask.long.word 0x5C 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg0Limit_Window1,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x5C 0.--11. 1. "diseng_idhash0_FG_cnt_Fg0Limit_Window1,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x60 "diseng_idhash0_Foreground1_Window1,Window 1. Foregound 1 Color settings. Used for Icon Mode." hexmask.long.byte 0x60 24.--31. 1. "diseng_idhash0_Foreground1_Red_Window1,Red color of foreground 1" newline hexmask.long.byte 0x60 16.--23. 1. "diseng_idhash0_Foreground1_Green_Window1,Green color of foreground 1" newline hexmask.long.byte 0x60 8.--15. 1. "diseng_idhash0_Foreground1_Blue_Window1,Blue color of foreground 1" line.long 0x64 "diseng_idhash0_Foreground1_Limits_Window1,Window 1. check Limit settings for foreground color 1 in icon mode." hexmask.long.word 0x64 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg1Limit_Window1,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x64 0.--11. 1. "diseng_idhash0_FG_cnt_Fg1Limit_Window1,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x68 "diseng_idhash0_Foreground2_Window1,Window 1. Foregound 2 Color settings" hexmask.long.byte 0x68 24.--31. 1. "diseng_idhash0_Foreground2_Red_Window1,Red color of foreground 2" newline hexmask.long.byte 0x68 16.--23. 1. "diseng_idhash0_Foreground2_Green_Window1,Green color of foreground 2" newline hexmask.long.byte 0x68 8.--15. 1. "diseng_idhash0_Foreground2_Blue_Window1,Blue color of foreground 2" line.long 0x6C "diseng_idhash0_Foreground2_Limits_Window1,Window 1. check Limit settings for foreground color 2 in icon mode." hexmask.long.word 0x6C 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg2Limit_Window1,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x6C 0.--11. 1. "diseng_idhash0_FG_cnt_Fg2Limit_Window1,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x70 "diseng_idhash0_Idx_Table_Window1,Window 1. Index Table" bitfld.long 0x70 29. "diseng_idhash0_idx3_fg2_FG_BGn_Window1,Foreground 2 foreground background select for Index 3" "0,1" newline bitfld.long 0x70 28. "diseng_idhash0_idx3_fg2_EN_Window1,Foreground 2 Enable for Index 3" "0,1" newline bitfld.long 0x70 27. "diseng_idhash0_idx3_fg1_FG_BGn_Window1,Foreground 1 foreground background select for Index 3" "0,1" newline bitfld.long 0x70 26. "diseng_idhash0_idx3_fg1_EN_Window1,Foreground 1 Enable for Index 3" "0,1" newline bitfld.long 0x70 25. "diseng_idhash0_idx3_fg0_FG_BGn_Window1,Foreground 0 foreground background select for Index 3" "0,1" newline bitfld.long 0x70 24. "diseng_idhash0_idx3_fg0_EN_Window1,Foreground 0 Enable for Index 3" "0,1" newline bitfld.long 0x70 21. "diseng_idhash0_idx2_fg2_FG_BGn_Window1,Foreground 2 foreground background select for Index 2" "0,1" newline bitfld.long 0x70 20. "diseng_idhash0_idx2_fg2_EN_Window1,Foreground 2 Enable for Index 2" "0,1" newline bitfld.long 0x70 19. "diseng_idhash0_idx2_fg1_FG_BGn_Window1,Foreground 1 foreground background select for Index 2" "0,1" newline bitfld.long 0x70 18. "diseng_idhash0_idx2_fg1_EN_Window1,Foreground 1 Enable for Index 2" "0,1" newline bitfld.long 0x70 17. "diseng_idhash0_idx2_fg0_FG_BGn_Window1,Foreground 0 foreground background select for Index 2" "0,1" newline bitfld.long 0x70 16. "diseng_idhash0_idx2_fg0_EN_Window1,Foreground 0 Enable for Index 2" "0,1" newline bitfld.long 0x70 13. "diseng_idhash0_idx1_fg2_FG_BGn_Window1,Foreground 2 foreground background select for Index 1" "0,1" newline bitfld.long 0x70 12. "diseng_idhash0_idx1_fg2_EN_Window1,Foreground 2 Enable for Index 1" "0,1" newline bitfld.long 0x70 11. "diseng_idhash0_idx1_fg1_FG_BGn_Window1,Foreground 1 foreground background select for Index 1" "0,1" newline bitfld.long 0x70 10. "diseng_idhash0_idx1_fg1_EN_Window1,Foreground 1 Enable for Index 1" "0,1" newline bitfld.long 0x70 9. "diseng_idhash0_idx1_fg0_FG_BGn_Window1,Foreground 0 foreground background select for Index 1" "0,1" newline bitfld.long 0x70 8. "diseng_idhash0_idx1_fg0_EN_Window1,Foreground 0 Enable for Index 1" "0,1" newline bitfld.long 0x70 5. "diseng_idhash0_idx0_fg2_FG_BGn_Window1,Foreground 2 foreground background select for Index 0" "0,1" newline bitfld.long 0x70 4. "diseng_idhash0_idx0_fg2_EN_Window1,Foreground 2 Enable for Index 0" "0,1" newline bitfld.long 0x70 3. "diseng_idhash0_idx0_fg1_FG_BGn_Window1,Foreground 1 foreground background select for Index 0" "0,1" newline bitfld.long 0x70 2. "diseng_idhash0_idx0_fg1_EN_Window1,Foreground 1 Enable for Index 0" "0,1" newline bitfld.long 0x70 1. "diseng_idhash0_idx0_fg0_FG_BGn_Window1,Foreground 0 foreground background select for Index 0" "0,1" newline bitfld.long 0x70 0. "diseng_idhash0_idx0_fg0_EN_Window1,Foreground 0 Enable for Index 0" "0,1" line.long 0x74 "diseng_idhash0_Control_Window2,Window 2. Control settings" bitfld.long 0x74 24. "diseng_idhash0_GlobalPanic_Window2,When enabled (value 1) the panic status of this window (Window_Panic bit2) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response." "0,1" newline hexmask.long.byte 0x74 16.--19. 1. "diseng_idhash0_LocalPanic_Window2,When enabled Bit0 (value 1) a panic status of Window 0 will replace all pixels inside this window (Window2) by a constant color on the display." newline bitfld.long 0x74 10. "diseng_idhash0_AlphaSel_Window2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x74 9. "diseng_idhash0_AlphaInv_Window2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x74 8. "diseng_idhash0_AlphaMask_Window2,When enabled (value 1) pixels with alpha bit = 0 are ignored for Idhash computation" "0,1" newline bitfld.long 0x74 0.--2. "diseng_idhash0_Mode_Window2,Defines the operation mode of this window." "0,1,2,3,4,5,6,7" line.long 0x78 "diseng_idhash0_UpperLeft_Window2,Window 2. Upper Left Coordinates" hexmask.long.word 0x78 16.--29. 1. "diseng_idhash0_UpperLeft_Y_Window2,Y coordinate" newline hexmask.long.word 0x78 0.--13. 1. "diseng_idhash0_UpperLeft_X_Window2,X coordinate" line.long 0x7C "diseng_idhash0_LowerRight_Window2,Window 2. Lower Right Coordinates" hexmask.long.word 0x7C 16.--29. 1. "diseng_idhash0_LowerRight_Y_Window2,Y coordinate" newline hexmask.long.word 0x7C 0.--13. 1. "diseng_idhash0_LowerRight_X_Window2,X coordinate" line.long 0x80 "diseng_idhash0_Tile_Window2,Window 2. Tile dimensions" hexmask.long.byte 0x80 4.--7. 1. "diseng_idhash0_Tile_Y_Window2,Y tile size - 1 i." newline hexmask.long.byte 0x80 0.--3. 1. "diseng_idhash0_Tile_X_Window2,X tile size - 1 i." line.long 0x84 "diseng_idhash0_Address_Window2,Window 2. Memory word Address for Idhash" hexmask.long.word 0x84 2.--11. 1. "diseng_idhash0_Address_Window2,Window 2 Memory word Address for Idhash" line.long 0x88 "diseng_idhash0_Config_Window2,Window 2. Idhash Configuration settings" hexmask.long.byte 0x88 24.--31. 1. "diseng_idhash0_RGB_Th_Window2,Threshold for RGB mode." newline hexmask.long.byte 0x88 16.--23. 1. "diseng_idhash0_Tolerance_Window2,Tolerance Level" newline hexmask.long.byte 0x88 8.--15. 1. "diseng_idhash0_Th_BG_Window2,Threshold value for background color component range." newline hexmask.long.byte 0x88 0.--7. 1. "diseng_idhash0_Th_FG_Window2,Threshold value for foreground color component range." line.long 0x8C "diseng_idhash0_Limits_Window2,Window 2. check Limit settings" hexmask.long.word 0x8C 16.--29. 1. "diseng_idhash0_Drop_cnt_SumLimit_Window2,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x8C 0.--13. 1. "diseng_idhash0_FG_cnt_SumLimit_Window2,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x90 "diseng_idhash0_Foreground0_Window2,Window 2. Foregound 0 Color settings." hexmask.long.byte 0x90 24.--31. 1. "diseng_idhash0_Foreground0_Red_Window2,Red color of foreground 0" newline hexmask.long.byte 0x90 16.--23. 1. "diseng_idhash0_Foreground0_Green_Window2,Green color of foreground 0" newline hexmask.long.byte 0x90 8.--15. 1. "diseng_idhash0_Foreground0_Blue_Window2,Blue color of foreground 0" line.long 0x94 "diseng_idhash0_Foreground0_Limits_Window2,Window 2. check Limit settings for Telltale mode or for foreground color 0 in icon mode." hexmask.long.word 0x94 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg0Limit_Window2,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x94 0.--11. 1. "diseng_idhash0_FG_cnt_Fg0Limit_Window2,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0x98 "diseng_idhash0_Foreground1_Window2,Window 2. Foregound 1 Color settings. Used for Icon Mode." hexmask.long.byte 0x98 24.--31. 1. "diseng_idhash0_Foreground1_Red_Window2,Red color of foreground 1" newline hexmask.long.byte 0x98 16.--23. 1. "diseng_idhash0_Foreground1_Green_Window2,Green color of foreground 1" newline hexmask.long.byte 0x98 8.--15. 1. "diseng_idhash0_Foreground1_Blue_Window2,Blue color of foreground 1" line.long 0x9C "diseng_idhash0_Foreground1_Limits_Window2,Window 2. check Limit settings for foreground color 1 in icon mode." hexmask.long.word 0x9C 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg1Limit_Window2,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0x9C 0.--11. 1. "diseng_idhash0_FG_cnt_Fg1Limit_Window2,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0xA0 "diseng_idhash0_Foreground2_Window2,Window 2. Foregound 2 Color settings" hexmask.long.byte 0xA0 24.--31. 1. "diseng_idhash0_Foreground2_Red_Window2,Red color of foreground 2" newline hexmask.long.byte 0xA0 16.--23. 1. "diseng_idhash0_Foreground2_Green_Window2,Green color of foreground 2" newline hexmask.long.byte 0xA0 8.--15. 1. "diseng_idhash0_Foreground2_Blue_Window2,Blue color of foreground 2" line.long 0xA4 "diseng_idhash0_Foreground2_Limits_Window2,Window 2. check Limit settings for foreground color 2 in icon mode." hexmask.long.word 0xA4 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg2Limit_Window2,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0xA4 0.--11. 1. "diseng_idhash0_FG_cnt_Fg2Limit_Window2,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0xA8 "diseng_idhash0_Idx_Table_Window2,Window 2. Index Table" bitfld.long 0xA8 29. "diseng_idhash0_idx3_fg2_FG_BGn_Window2,Foreground 2 foreground background select for Index 3" "0,1" newline bitfld.long 0xA8 28. "diseng_idhash0_idx3_fg2_EN_Window2,Foreground 2 Enable for Index 3" "0,1" newline bitfld.long 0xA8 27. "diseng_idhash0_idx3_fg1_FG_BGn_Window2,Foreground 1 foreground background select for Index 3" "0,1" newline bitfld.long 0xA8 26. "diseng_idhash0_idx3_fg1_EN_Window2,Foreground 1 Enable for Index 3" "0,1" newline bitfld.long 0xA8 25. "diseng_idhash0_idx3_fg0_FG_BGn_Window2,Foreground 0 foreground background select for Index 3" "0,1" newline bitfld.long 0xA8 24. "diseng_idhash0_idx3_fg0_EN_Window2,Foreground 0 Enable for Index 3" "0,1" newline bitfld.long 0xA8 21. "diseng_idhash0_idx2_fg2_FG_BGn_Window2,Foreground 2 foreground background select for Index 2" "0,1" newline bitfld.long 0xA8 20. "diseng_idhash0_idx2_fg2_EN_Window2,Foreground 2 Enable for Index 2" "0,1" newline bitfld.long 0xA8 19. "diseng_idhash0_idx2_fg1_FG_BGn_Window2,Foreground 1 foreground background select for Index 2" "0,1" newline bitfld.long 0xA8 18. "diseng_idhash0_idx2_fg1_EN_Window2,Foreground 1 Enable for Index 2" "0,1" newline bitfld.long 0xA8 17. "diseng_idhash0_idx2_fg0_FG_BGn_Window2,Foreground 0 foreground background select for Index 2" "0,1" newline bitfld.long 0xA8 16. "diseng_idhash0_idx2_fg0_EN_Window2,Foreground 0 Enable for Index 2" "0,1" newline bitfld.long 0xA8 13. "diseng_idhash0_idx1_fg2_FG_BGn_Window2,Foreground 2 foreground background select for Index 1" "0,1" newline bitfld.long 0xA8 12. "diseng_idhash0_idx1_fg2_EN_Window2,Foreground 2 Enable for Index 1" "0,1" newline bitfld.long 0xA8 11. "diseng_idhash0_idx1_fg1_FG_BGn_Window2,Foreground 1 foreground background select for Index 1" "0,1" newline bitfld.long 0xA8 10. "diseng_idhash0_idx1_fg1_EN_Window2,Foreground 1 Enable for Index 1" "0,1" newline bitfld.long 0xA8 9. "diseng_idhash0_idx1_fg0_FG_BGn_Window2,Foreground 0 foreground background select for Index 1" "0,1" newline bitfld.long 0xA8 8. "diseng_idhash0_idx1_fg0_EN_Window2,Foreground 0 Enable for Index 1" "0,1" newline bitfld.long 0xA8 5. "diseng_idhash0_idx0_fg2_FG_BGn_Window2,Foreground 2 foreground background select for Index 0" "0,1" newline bitfld.long 0xA8 4. "diseng_idhash0_idx0_fg2_EN_Window2,Foreground 2 Enable for Index 0" "0,1" newline bitfld.long 0xA8 3. "diseng_idhash0_idx0_fg1_FG_BGn_Window2,Foreground 1 foreground background select for Index 0" "0,1" newline bitfld.long 0xA8 2. "diseng_idhash0_idx0_fg1_EN_Window2,Foreground 1 Enable for Index 0" "0,1" newline bitfld.long 0xA8 1. "diseng_idhash0_idx0_fg0_FG_BGn_Window2,Foreground 0 foreground background select for Index 0" "0,1" newline bitfld.long 0xA8 0. "diseng_idhash0_idx0_fg0_EN_Window2,Foreground 0 Enable for Index 0" "0,1" line.long 0xAC "diseng_idhash0_Control_Window3,Window 3. Control settings" bitfld.long 0xAC 24. "diseng_idhash0_GlobalPanic_Window3,When enabled (value 1) the panic status of this window (Window_Panic bit3) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response." "0,1" newline hexmask.long.byte 0xAC 16.--19. 1. "diseng_idhash0_LocalPanic_Window3,When enabled Bit0 (value 1) a panic status of Window 0 will replace all pixels inside this window (Window3) by a constant color on the display." newline bitfld.long 0xAC 10. "diseng_idhash0_AlphaSel_Window3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xAC 9. "diseng_idhash0_AlphaInv_Window3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xAC 8. "diseng_idhash0_AlphaMask_Window3,When enabled (value 1) pixels with alpha bit = 0 are ignored for Idhash computation" "0,1" newline bitfld.long 0xAC 0.--2. "diseng_idhash0_Mode_Window3,Defines the operation mode of this window." "0,1,2,3,4,5,6,7" line.long 0xB0 "diseng_idhash0_UpperLeft_Window3,Window 3. Upper Left Coordinates" hexmask.long.word 0xB0 16.--29. 1. "diseng_idhash0_UpperLeft_Y_Window3,Y coordinate" newline hexmask.long.word 0xB0 0.--13. 1. "diseng_idhash0_UpperLeft_X_Window3,X coordinate" line.long 0xB4 "diseng_idhash0_LowerRight_Window3,Window 3. Lower Right Coordinates" hexmask.long.word 0xB4 16.--29. 1. "diseng_idhash0_LowerRight_Y_Window3,Y coordinate" newline hexmask.long.word 0xB4 0.--13. 1. "diseng_idhash0_LowerRight_X_Window3,X coordinate" line.long 0xB8 "diseng_idhash0_Tile_Window3,Window 3. Tile dimensions" hexmask.long.byte 0xB8 4.--7. 1. "diseng_idhash0_Tile_Y_Window3,Y tile size - 1 i." newline hexmask.long.byte 0xB8 0.--3. 1. "diseng_idhash0_Tile_X_Window3,X tile size - 1 i." line.long 0xBC "diseng_idhash0_Address_Window3,Window 3. Memory word Address for Idhash" hexmask.long.word 0xBC 2.--11. 1. "diseng_idhash0_Address_Window3,Window 3 Memory word Address for Idhash" line.long 0xC0 "diseng_idhash0_Config_Window3,Window 3. Idhash Configuration settings" hexmask.long.byte 0xC0 24.--31. 1. "diseng_idhash0_RGB_Th_Window3,Threshold for RGB mode." newline hexmask.long.byte 0xC0 16.--23. 1. "diseng_idhash0_Tolerance_Window3,Tolerance Level" newline hexmask.long.byte 0xC0 8.--15. 1. "diseng_idhash0_Th_BG_Window3,Threshold value for background color component range." newline hexmask.long.byte 0xC0 0.--7. 1. "diseng_idhash0_Th_FG_Window3,Threshold value for foreground color component range." line.long 0xC4 "diseng_idhash0_Limits_Window3,Window 3. check Limit settings" hexmask.long.word 0xC4 16.--29. 1. "diseng_idhash0_Drop_cnt_SumLimit_Window3,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0xC4 0.--13. 1. "diseng_idhash0_FG_cnt_SumLimit_Window3,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0xC8 "diseng_idhash0_Foreground0_Window3,Window 3. Foregound 0 Color settings." hexmask.long.byte 0xC8 24.--31. 1. "diseng_idhash0_Foreground0_Red_Window3,Red color of foreground 0" newline hexmask.long.byte 0xC8 16.--23. 1. "diseng_idhash0_Foreground0_Green_Window3,Green color of foreground 0" newline hexmask.long.byte 0xC8 8.--15. 1. "diseng_idhash0_Foreground0_Blue_Window3,Blue color of foreground 0" line.long 0xCC "diseng_idhash0_Foreground0_Limits_Window3,Window 3. check Limit settings for Telltale mode or for foreground color 0 in icon mode." hexmask.long.word 0xCC 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg0Limit_Window3,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0xCC 0.--11. 1. "diseng_idhash0_FG_cnt_Fg0Limit_Window3,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0xD0 "diseng_idhash0_Foreground1_Window3,Window 3. Foregound 1 Color settings. Used for Icon Mode." hexmask.long.byte 0xD0 24.--31. 1. "diseng_idhash0_Foreground1_Red_Window3,Red color of foreground 1" newline hexmask.long.byte 0xD0 16.--23. 1. "diseng_idhash0_Foreground1_Green_Window3,Green color of foreground 1" newline hexmask.long.byte 0xD0 8.--15. 1. "diseng_idhash0_Foreground1_Blue_Window3,Blue color of foreground 1" line.long 0xD4 "diseng_idhash0_Foreground1_Limits_Window3,Window 3. check Limit settings for foreground color 1 in icon mode." hexmask.long.word 0xD4 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg1Limit_Window3,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0xD4 0.--11. 1. "diseng_idhash0_FG_cnt_Fg1Limit_Window3,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0xD8 "diseng_idhash0_Foreground2_Window3,Window 3. Foregound 2 Color settings" hexmask.long.byte 0xD8 24.--31. 1. "diseng_idhash0_Foreground2_Red_Window3,Red color of foreground 2" newline hexmask.long.byte 0xD8 16.--23. 1. "diseng_idhash0_Foreground2_Green_Window3,Green color of foreground 2" newline hexmask.long.byte 0xD8 8.--15. 1. "diseng_idhash0_Foreground2_Blue_Window3,Blue color of foreground 2" line.long 0xDC "diseng_idhash0_Foreground2_Limits_Window3,Window 3. check Limit settings for foreground color 2 in icon mode." hexmask.long.word 0xDC 16.--27. 1. "diseng_idhash0_Drop_cnt_Fg2Limit_Window3,Maximum Number of Drop tiles which are allowed for passing the test." newline hexmask.long.word 0xDC 0.--11. 1. "diseng_idhash0_FG_cnt_Fg2Limit_Window3,Minimum Number of Foreground tiles which needed to be found for passing the test." line.long 0xE0 "diseng_idhash0_Idx_Table_Window3,Window 3. Index Table" bitfld.long 0xE0 29. "diseng_idhash0_idx3_fg2_FG_BGn_Window3,Foreground 2 foreground background select for Index 3" "0,1" newline bitfld.long 0xE0 28. "diseng_idhash0_idx3_fg2_EN_Window3,Foreground 2 Enable for Index 3" "0,1" newline bitfld.long 0xE0 27. "diseng_idhash0_idx3_fg1_FG_BGn_Window3,Foreground 1 foreground background select for Index 3" "0,1" newline bitfld.long 0xE0 26. "diseng_idhash0_idx3_fg1_EN_Window3,Foreground 1 Enable for Index 3" "0,1" newline bitfld.long 0xE0 25. "diseng_idhash0_idx3_fg0_FG_BGn_Window3,Foreground 0 foreground background select for Index 3" "0,1" newline bitfld.long 0xE0 24. "diseng_idhash0_idx3_fg0_EN_Window3,Foreground 0 Enable for Index 3" "0,1" newline bitfld.long 0xE0 21. "diseng_idhash0_idx2_fg2_FG_BGn_Window3,Foreground 2 foreground background select for Index 2" "0,1" newline bitfld.long 0xE0 20. "diseng_idhash0_idx2_fg2_EN_Window3,Foreground 2 Enable for Index 2" "0,1" newline bitfld.long 0xE0 19. "diseng_idhash0_idx2_fg1_FG_BGn_Window3,Foreground 1 foreground background select for Index 2" "0,1" newline bitfld.long 0xE0 18. "diseng_idhash0_idx2_fg1_EN_Window3,Foreground 1 Enable for Index 2" "0,1" newline bitfld.long 0xE0 17. "diseng_idhash0_idx2_fg0_FG_BGn_Window3,Foreground 0 foreground background select for Index 2" "0,1" newline bitfld.long 0xE0 16. "diseng_idhash0_idx2_fg0_EN_Window3,Foreground 0 Enable for Index 2" "0,1" newline bitfld.long 0xE0 13. "diseng_idhash0_idx1_fg2_FG_BGn_Window3,Foreground 2 foreground background select for Index 1" "0,1" newline bitfld.long 0xE0 12. "diseng_idhash0_idx1_fg2_EN_Window3,Foreground 2 Enable for Index 1" "0,1" newline bitfld.long 0xE0 11. "diseng_idhash0_idx1_fg1_FG_BGn_Window3,Foreground 1 foreground background select for Index 1" "0,1" newline bitfld.long 0xE0 10. "diseng_idhash0_idx1_fg1_EN_Window3,Foreground 1 Enable for Index 1" "0,1" newline bitfld.long 0xE0 9. "diseng_idhash0_idx1_fg0_FG_BGn_Window3,Foreground 0 foreground background select for Index 1" "0,1" newline bitfld.long 0xE0 8. "diseng_idhash0_idx1_fg0_EN_Window3,Foreground 0 Enable for Index 1" "0,1" newline bitfld.long 0xE0 5. "diseng_idhash0_idx0_fg2_FG_BGn_Window3,Foreground 2 foreground background select for Index 0" "0,1" newline bitfld.long 0xE0 4. "diseng_idhash0_idx0_fg2_EN_Window3,Foreground 2 Enable for Index 0" "0,1" newline bitfld.long 0xE0 3. "diseng_idhash0_idx0_fg1_FG_BGn_Window3,Foreground 1 foreground background select for Index 0" "0,1" newline bitfld.long 0xE0 2. "diseng_idhash0_idx0_fg1_EN_Window3,Foreground 1 Enable for Index 0" "0,1" newline bitfld.long 0xE0 1. "diseng_idhash0_idx0_fg0_FG_BGn_Window3,Foreground 0 foreground background select for Index 0" "0,1" newline bitfld.long 0xE0 0. "diseng_idhash0_idx0_fg0_EN_Window3,Foreground 0 Enable for Index 0" "0,1" group.long 0x2C1000++0x3 line.long 0x0 "diseng_idhash0_IDRAM,SRAM. usage according to module register setup." hexmask.long 0x0 0.--31. 1. "diseng_idhash0_data,SRAM data word." wgroup.long 0x2C3000++0x3 line.long 0x0 "diseng_idhash0cfg_LockUnlock0,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_idhash0cfg_LockUnlock0,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2C3004++0x3 line.long 0x0 "diseng_idhash0cfg_LockStatus0,Protection status of this address block." bitfld.long 0x0 8. "diseng_idhash0cfg_FreezeStatus0,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_idhash0cfg_PrivilegeStatus0,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_idhash0cfg_LockStatus0,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2C3008++0x3 line.long 0x0 "diseng_idhash0cfg_SrcSelect,Tap selection for IDHash0." bitfld.long 0x0 0.--1. "diseng_idhash0cfg_idhash0_select,Selects a source for IDHash#0 unit." "0,1,2,3" wgroup.long 0x2D0000++0x3 line.long 0x0 "diseng_sig0_LockUnlock,Register to change the protection status of this address block" hexmask.long 0x0 0.--31. 1. "diseng_sig0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2D0004++0x3 line.long 0x0 "diseng_sig0_LockStatus,Protection status of this address block" bitfld.long 0x0 8. "diseng_sig0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed" "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_sig0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active" "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_sig0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)" "0: inactive,1: active" group.long 0x2D0008++0x17 line.long 0x0 "diseng_sig0_StaticControl,Global configuration" bitfld.long 0x0 4. "diseng_sig0_ShdLdSel,Source select for events that will load shadow registers into the active configuration" "0,1" newline bitfld.long 0x0 0. "diseng_sig0_ShdEn,Enables shadow registers for RWS type fields (0 = write through 1 = shadowed)" "0: write through,1: shadowed)" line.long 0x4 "diseng_sig0_ErrorThreshold,Set and reset thresholds applying to Window_Error and Cluster_Error interrupts and status bits" hexmask.long.byte 0x4 16.--23. 1. "diseng_sig0_ErrThresReset,Number of consecutive 'MATCH' frames before resetting respective Error/Error bit" newline hexmask.long.byte 0x4 0.--7. 1. "diseng_sig0_ErrThres,Number of 'ERROR' frames before generating error interrupt and asserting respective Error/Error status bit" line.long 0x8 "diseng_sig0_MatchThreshold,Set and reset thresholds applying to Match interrupt and status bits" hexmask.long.byte 0x8 16.--23. 1. "diseng_sig0_MatchThresReset,Number of consecutive 'ERROR' frames before resetting respective Match bit" newline hexmask.long.byte 0x8 0.--7. 1. "diseng_sig0_MatchThres,Number of 'MATCH' frames before generating match interrupt and asserting respective Match bit" line.long 0xC "diseng_sig0_PanicColor,Overlay color for evaluation windows in panic mode" hexmask.long.byte 0xC 24.--31. 1. "diseng_sig0_PanicRed,Red color component" newline hexmask.long.byte 0xC 16.--23. 1. "diseng_sig0_PanicGreen,Green color component" newline hexmask.long.byte 0xC 8.--15. 1. "diseng_sig0_PanicBlue,Blue color component" newline hexmask.long.byte 0xC 0.--7. 1. "diseng_sig0_PanicAlpha,Alpha mask bit" line.long 0x10 "diseng_sig0_ShadowLoad,Shadow load control register" hexmask.long.byte 0x10 0.--7. 1. "diseng_sig0_ShdLdReq,Shadow load request for each evaluation window (bit index = window index)" line.long 0x14 "diseng_sig0_ContinuousMode,Signature operation mode control" bitfld.long 0x14 0. "diseng_sig0_EnCont,EnCont = 0: disables continuous mode" "0: disables continuous mode,?" wgroup.long 0x2D0020++0x3 line.long 0x0 "diseng_sig0_SoftwareKick,Signature measurement trigger" bitfld.long 0x0 0. "diseng_sig0_Kick,ContinueMode." "0,1" group.long 0x2D0024++0x3 line.long 0x0 "diseng_sig0_SkipWindow,Enable skipping window feature." bitfld.long 0x0 0. "diseng_sig0_SkipWinEn,If skip window feature is enabled the pixels overlapping multiple windows will be computed for CRC and statistics only in the highest priority window." "0,1" rgroup.long 0x2D0028++0x3 line.long 0x0 "diseng_sig0_Status,Signature evaluation status" hexmask.long.byte 0x0 20.--23. 1. "diseng_sig0_Cluster_Match,Match status bits for all evaluation clusters (bit index = cluster index)" newline hexmask.long.byte 0x0 16.--19. 1. "diseng_sig0_Cluster_Error,Error status bits for all evaluation clusters (bit index = cluster index)" newline hexmask.long.byte 0x0 8.--15. 1. "diseng_sig0_Window_Error,Error status bits for all evaluation windows (bit index = window index)" newline bitfld.long 0x0 1. "diseng_sig0_SigValid,Measured signature values are valid" "0,1" newline bitfld.long 0x0 0. "diseng_sig0_SigState,Run state of the module" "0,1" group.long 0x2D002C++0x1CF line.long 0x0 "diseng_sig0_Control_Window0,Window 0. Control settings" bitfld.long 0x0 24. "diseng_sig0_Sum_Window0,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x0 17. "diseng_sig0_GlobalPanic_Window0,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x0 16. "diseng_sig0_LocalPanic_Window0,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x0 10. "diseng_sig0_AlphaSel_Window0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x0 9. "diseng_sig0_AlphaInv_Window0,When enabled (value 1) the effect of AlphaMask (in enabled mode) is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x0 8. "diseng_sig0_AlphaMask_Window0,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x0 1. "diseng_sig0_CRC_Window0,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x0 0. "diseng_sig0_En_Window0,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x4 "diseng_sig0_UpperLeft_Window0,Window 0. Upper Left Coordinates" hexmask.long.word 0x4 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window0,Y coordinate" newline hexmask.long.word 0x4 0.--13. 1. "diseng_sig0_UpperLeft_X_Window0,X coordinate" line.long 0x8 "diseng_sig0_LowerRight_Window0,Window 0. Lower Right Coordinates" hexmask.long.word 0x8 16.--29. 1. "diseng_sig0_LowerRight_Y_Window0,Y coordinate" newline hexmask.long.word 0x8 0.--13. 1. "diseng_sig0_LowerRight_X_Window0,X coordinate" line.long 0xC "diseng_sig0_Ref_R_Window0,Window 0. Reference CRC Value of Red Channel" hexmask.long 0xC 0.--31. 1. "diseng_sig0_Ref_R_Window0,Reference value that is compared against measured CRC_R value" line.long 0x10 "diseng_sig0_Ref_G_Window0,Window 0. Reference CRC Value of Green Channel" hexmask.long 0x10 0.--31. 1. "diseng_sig0_Ref_G_Window0,Reference value that is compared against measured CRC_G value" line.long 0x14 "diseng_sig0_Ref_B_Window0,Window 0. Reference CRC Value of Blue Channel" hexmask.long 0x14 0.--31. 1. "diseng_sig0_Ref_B_Window0,Reference value that is compared against measured CRC_B value" line.long 0x18 "diseng_sig0_Stats0_Window0,Controls of Statistics Block 0. Window 0" bitfld.long 0x18 2. "diseng_sig0_AlphaSel_S0_Win0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x18 1. "diseng_sig0_AlphaInv_S0_Win0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x18 0. "diseng_sig0_AlphaMask_S0_Win0,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x1C "diseng_sig0_Stats1_Window0,Controls of Statistics Block 0. Window 0" bitfld.long 0x1C 2. "diseng_sig0_AlphaSel_S1_Win0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x1C 1. "diseng_sig0_AlphaInv_S1_Win0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x1C 0. "diseng_sig0_AlphaMask_S1_Win0,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x20 "diseng_sig0_Min_RedSum_Window0,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0x20 0.--31. 1. "diseng_sig0_Min_RSum_Win0,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0x24 "diseng_sig0_Min_GreenSum_Window0,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0x24 0.--31. 1. "diseng_sig0_Min_GSum_Win0,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0x28 "diseng_sig0_Min_BlueSum_Window0,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0x28 0.--31. 1. "diseng_sig0_Min_BSum_Win0,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0x2C "diseng_sig0_Min_LumSum_Window0,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0x2C 0.--31. 1. "diseng_sig0_Min_LSum_Win0,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0x30 "diseng_sig0_Max_RedSum_Window0,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0x30 0.--31. 1. "diseng_sig0_Max_RSum_Win0,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0x34 "diseng_sig0_Max_GreenSum_Window0,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0x34 0.--31. 1. "diseng_sig0_Max_GSum_Win0,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0x38 "diseng_sig0_Max_BlueSum_Window0,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0x38 0.--31. 1. "diseng_sig0_Max_BSum_Win0,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0x3C "diseng_sig0_Max_LumSum_Window0,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0x3C 0.--31. 1. "diseng_sig0_Max_LSum_Win0,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x40 "diseng_sig0_Control_Window1,Window 1. Control settings" bitfld.long 0x40 24. "diseng_sig0_Sum_Window1,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x40 17. "diseng_sig0_GlobalPanic_Window1,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x40 16. "diseng_sig0_LocalPanic_Window1,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x40 10. "diseng_sig0_AlphaSel_Window1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x40 9. "diseng_sig0_AlphaInv_Window1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x40 8. "diseng_sig0_AlphaMask_Window1,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x40 1. "diseng_sig0_CRC_Window1,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x40 0. "diseng_sig0_En_Window1,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x44 "diseng_sig0_UpperLeft_Window1,Window 1. Upper Left Coordinates" hexmask.long.word 0x44 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window1,Y coordinate" newline hexmask.long.word 0x44 0.--13. 1. "diseng_sig0_UpperLeft_X_Window1,X coordinate" line.long 0x48 "diseng_sig0_LowerRight_Window1,Window 1. Lower Right Coordinates" hexmask.long.word 0x48 16.--29. 1. "diseng_sig0_LowerRight_Y_Window1,Y coordinate" newline hexmask.long.word 0x48 0.--13. 1. "diseng_sig0_LowerRight_X_Window1,X coordinate" line.long 0x4C "diseng_sig0_Ref_R_Window1,Window 1. Reference CRC Value of Red Channel" hexmask.long 0x4C 0.--31. 1. "diseng_sig0_Ref_R_Window1,Reference value that is compared against measured CRC_R value" line.long 0x50 "diseng_sig0_Ref_G_Window1,Window 1. Reference CRC Value of Green Channel" hexmask.long 0x50 0.--31. 1. "diseng_sig0_Ref_G_Window1,Reference value that is compared against measured CRC_G value" line.long 0x54 "diseng_sig0_Ref_B_Window1,Window 1. Reference CRC Value of Blue Channel" hexmask.long 0x54 0.--31. 1. "diseng_sig0_Ref_B_Window1,Reference value that is compared against measured CRC_B value" line.long 0x58 "diseng_sig0_Stats0_Window1,Controls of Statistics Block 0. Window 1" bitfld.long 0x58 2. "diseng_sig0_AlphaSel_S0_Win1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x58 1. "diseng_sig0_AlphaInv_S0_Win1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x58 0. "diseng_sig0_AlphaMask_S0_Win1,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x5C "diseng_sig0_Stats1_Window1,Controls of Statistics Block 0. Window 1" bitfld.long 0x5C 2. "diseng_sig0_AlphaSel_S1_Win1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x5C 1. "diseng_sig0_AlphaInv_S1_Win1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x5C 0. "diseng_sig0_AlphaMask_S1_Win1,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x60 "diseng_sig0_Min_RedSum_Window1,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0x60 0.--31. 1. "diseng_sig0_Min_RSum_Win1,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0x64 "diseng_sig0_Min_GreenSum_Window1,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0x64 0.--31. 1. "diseng_sig0_Min_GSum_Win1,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0x68 "diseng_sig0_Min_BlueSum_Window1,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0x68 0.--31. 1. "diseng_sig0_Min_BSum_Win1,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0x6C "diseng_sig0_Min_LumSum_Window1,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0x6C 0.--31. 1. "diseng_sig0_Min_LSum_Win1,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0x70 "diseng_sig0_Max_RedSum_Window1,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0x70 0.--31. 1. "diseng_sig0_Max_RSum_Win1,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0x74 "diseng_sig0_Max_GreenSum_Window1,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0x74 0.--31. 1. "diseng_sig0_Max_GSum_Win1,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0x78 "diseng_sig0_Max_BlueSum_Window1,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0x78 0.--31. 1. "diseng_sig0_Max_BSum_Win1,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0x7C "diseng_sig0_Max_LumSum_Window1,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0x7C 0.--31. 1. "diseng_sig0_Max_LSum_Win1,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x80 "diseng_sig0_Control_Window2,Window 2. Control settings" bitfld.long 0x80 24. "diseng_sig0_Sum_Window2,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x80 17. "diseng_sig0_GlobalPanic_Window2,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x80 16. "diseng_sig0_LocalPanic_Window2,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x80 10. "diseng_sig0_AlphaSel_Window2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x80 9. "diseng_sig0_AlphaInv_Window2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x80 8. "diseng_sig0_AlphaMask_Window2,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x80 1. "diseng_sig0_CRC_Window2,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x80 0. "diseng_sig0_En_Window2,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x84 "diseng_sig0_UpperLeft_Window2,Window 2. Upper Left Coordinates" hexmask.long.word 0x84 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window2,Y coordinate" newline hexmask.long.word 0x84 0.--13. 1. "diseng_sig0_UpperLeft_X_Window2,X coordinate" line.long 0x88 "diseng_sig0_LowerRight_Window2,Window 2. Lower Right Coordinates" hexmask.long.word 0x88 16.--29. 1. "diseng_sig0_LowerRight_Y_Window2,Y coordinate" newline hexmask.long.word 0x88 0.--13. 1. "diseng_sig0_LowerRight_X_Window2,X coordinate" line.long 0x8C "diseng_sig0_Ref_R_Window2,Window 2. Reference CRC Value of Red Channel" hexmask.long 0x8C 0.--31. 1. "diseng_sig0_Ref_R_Window2,Reference value that is compared against measured CRC_R value" line.long 0x90 "diseng_sig0_Ref_G_Window2,Window 2. Reference CRC Value of Green Channel" hexmask.long 0x90 0.--31. 1. "diseng_sig0_Ref_G_Window2,Reference value that is compared against measured CRC_G value" line.long 0x94 "diseng_sig0_Ref_B_Window2,Window 2. Reference CRC Value of Blue Channel" hexmask.long 0x94 0.--31. 1. "diseng_sig0_Ref_B_Window2,Reference value that is compared against measured CRC_B value" line.long 0x98 "diseng_sig0_Stats0_Window2,Controls of Statistics Block 0. Window 2" bitfld.long 0x98 2. "diseng_sig0_AlphaSel_S0_Win2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x98 1. "diseng_sig0_AlphaInv_S0_Win2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x98 0. "diseng_sig0_AlphaMask_S0_Win2,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x9C "diseng_sig0_Stats1_Window2,Controls of Statistics Block 0. Window 2" bitfld.long 0x9C 2. "diseng_sig0_AlphaSel_S1_Win2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x9C 1. "diseng_sig0_AlphaInv_S1_Win2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x9C 0. "diseng_sig0_AlphaMask_S1_Win2,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xA0 "diseng_sig0_Min_RedSum_Window2,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0xA0 0.--31. 1. "diseng_sig0_Min_RSum_Win2,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0xA4 "diseng_sig0_Min_GreenSum_Window2,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0xA4 0.--31. 1. "diseng_sig0_Min_GSum_Win2,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0xA8 "diseng_sig0_Min_BlueSum_Window2,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0xA8 0.--31. 1. "diseng_sig0_Min_BSum_Win2,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0xAC "diseng_sig0_Min_LumSum_Window2,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0xAC 0.--31. 1. "diseng_sig0_Min_LSum_Win2,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0xB0 "diseng_sig0_Max_RedSum_Window2,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0xB0 0.--31. 1. "diseng_sig0_Max_RSum_Win2,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0xB4 "diseng_sig0_Max_GreenSum_Window2,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0xB4 0.--31. 1. "diseng_sig0_Max_GSum_Win2,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0xB8 "diseng_sig0_Max_BlueSum_Window2,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0xB8 0.--31. 1. "diseng_sig0_Max_BSum_Win2,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0xBC "diseng_sig0_Max_LumSum_Window2,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0xBC 0.--31. 1. "diseng_sig0_Max_LSum_Win2,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0xC0 "diseng_sig0_Control_Window3,Window 3. Control settings" bitfld.long 0xC0 24. "diseng_sig0_Sum_Window3,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0xC0 17. "diseng_sig0_GlobalPanic_Window3,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0xC0 16. "diseng_sig0_LocalPanic_Window3,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0xC0 10. "diseng_sig0_AlphaSel_Window3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xC0 9. "diseng_sig0_AlphaInv_Window3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xC0 8. "diseng_sig0_AlphaMask_Window3,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0xC0 1. "diseng_sig0_CRC_Window3,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0xC0 0. "diseng_sig0_En_Window3,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0xC4 "diseng_sig0_UpperLeft_Window3,Window 3. Upper Left Coordinates" hexmask.long.word 0xC4 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window3,Y coordinate" newline hexmask.long.word 0xC4 0.--13. 1. "diseng_sig0_UpperLeft_X_Window3,X coordinate" line.long 0xC8 "diseng_sig0_LowerRight_Window3,Window 3. Lower Right Coordinates" hexmask.long.word 0xC8 16.--29. 1. "diseng_sig0_LowerRight_Y_Window3,Y coordinate" newline hexmask.long.word 0xC8 0.--13. 1. "diseng_sig0_LowerRight_X_Window3,X coordinate" line.long 0xCC "diseng_sig0_Ref_R_Window3,Window 3. Reference CRC Value of Red Channel" hexmask.long 0xCC 0.--31. 1. "diseng_sig0_Ref_R_Window3,Reference value that is compared against measured CRC_R value" line.long 0xD0 "diseng_sig0_Ref_G_Window3,Window 3. Reference CRC Value of Green Channel" hexmask.long 0xD0 0.--31. 1. "diseng_sig0_Ref_G_Window3,Reference value that is compared against measured CRC_G value" line.long 0xD4 "diseng_sig0_Ref_B_Window3,Window 3. Reference CRC Value of Blue Channel" hexmask.long 0xD4 0.--31. 1. "diseng_sig0_Ref_B_Window3,Reference value that is compared against measured CRC_B value" line.long 0xD8 "diseng_sig0_Stats0_Window3,Controls of Statistics Block 0. Window 3" bitfld.long 0xD8 2. "diseng_sig0_AlphaSel_S0_Win3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xD8 1. "diseng_sig0_AlphaInv_S0_Win3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xD8 0. "diseng_sig0_AlphaMask_S0_Win3,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xDC "diseng_sig0_Stats1_Window3,Controls of Statistics Block 0. Window 3" bitfld.long 0xDC 2. "diseng_sig0_AlphaSel_S1_Win3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xDC 1. "diseng_sig0_AlphaInv_S1_Win3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xDC 0. "diseng_sig0_AlphaMask_S1_Win3,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xE0 "diseng_sig0_Min_RedSum_Window3,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0xE0 0.--31. 1. "diseng_sig0_Min_RSum_Win3,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0xE4 "diseng_sig0_Min_GreenSum_Window3,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0xE4 0.--31. 1. "diseng_sig0_Min_GSum_Win3,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0xE8 "diseng_sig0_Min_BlueSum_Window3,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0xE8 0.--31. 1. "diseng_sig0_Min_BSum_Win3,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0xEC "diseng_sig0_Min_LumSum_Window3,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0xEC 0.--31. 1. "diseng_sig0_Min_LSum_Win3,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0xF0 "diseng_sig0_Max_RedSum_Window3,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0xF0 0.--31. 1. "diseng_sig0_Max_RSum_Win3,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0xF4 "diseng_sig0_Max_GreenSum_Window3,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0xF4 0.--31. 1. "diseng_sig0_Max_GSum_Win3,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0xF8 "diseng_sig0_Max_BlueSum_Window3,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0xF8 0.--31. 1. "diseng_sig0_Max_BSum_Win3,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0xFC "diseng_sig0_Max_LumSum_Window3,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0xFC 0.--31. 1. "diseng_sig0_Max_LSum_Win3,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x100 "diseng_sig0_Control_Window4,Window 4. Control settings" bitfld.long 0x100 17. "diseng_sig0_GlobalPanic_Window4,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x100 16. "diseng_sig0_LocalPanic_Window4,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x100 10. "diseng_sig0_AlphaSel_Window4,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x100 9. "diseng_sig0_AlphaInv_Window4,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x100 8. "diseng_sig0_AlphaMask_Window4,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x100 1. "diseng_sig0_CRC_Window4,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x100 0. "diseng_sig0_En_Window4,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x104 "diseng_sig0_UpperLeft_Window4,Window 4. Upper Left Coordinates" hexmask.long.word 0x104 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window4,Y coordinate" newline hexmask.long.word 0x104 0.--13. 1. "diseng_sig0_UpperLeft_X_Window4,X coordinate" line.long 0x108 "diseng_sig0_LowerRight_Window4,Window 4. Lower Right Coordinates" hexmask.long.word 0x108 16.--29. 1. "diseng_sig0_LowerRight_Y_Window4,Y coordinate" newline hexmask.long.word 0x108 0.--13. 1. "diseng_sig0_LowerRight_X_Window4,X coordinate" line.long 0x10C "diseng_sig0_Ref_R_Window4,Window 4. Reference CRC Value of Red Channel" hexmask.long 0x10C 0.--31. 1. "diseng_sig0_Ref_R_Window4,Reference value that is compared against measured CRC_R value" line.long 0x110 "diseng_sig0_Ref_G_Window4,Window 4. Reference CRC Value of Green Channel" hexmask.long 0x110 0.--31. 1. "diseng_sig0_Ref_G_Window4,Reference value that is compared against measured CRC_G value" line.long 0x114 "diseng_sig0_Ref_B_Window4,Window 4. Reference CRC Value of Blue Channel" hexmask.long 0x114 0.--31. 1. "diseng_sig0_Ref_B_Window4,Reference value that is compared against measured CRC_B value" line.long 0x118 "diseng_sig0_Control_Window5,Window 5. Control settings" bitfld.long 0x118 17. "diseng_sig0_GlobalPanic_Window5,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x118 16. "diseng_sig0_LocalPanic_Window5,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x118 10. "diseng_sig0_AlphaSel_Window5,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x118 9. "diseng_sig0_AlphaInv_Window5,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x118 8. "diseng_sig0_AlphaMask_Window5,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x118 1. "diseng_sig0_CRC_Window5,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x118 0. "diseng_sig0_En_Window5,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x11C "diseng_sig0_UpperLeft_Window5,Window 5. Upper Left Coordinates" hexmask.long.word 0x11C 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window5,Y coordinate" newline hexmask.long.word 0x11C 0.--13. 1. "diseng_sig0_UpperLeft_X_Window5,X coordinate" line.long 0x120 "diseng_sig0_LowerRight_Window5,Window 5. Lower Right Coordinates" hexmask.long.word 0x120 16.--29. 1. "diseng_sig0_LowerRight_Y_Window5,Y coordinate" newline hexmask.long.word 0x120 0.--13. 1. "diseng_sig0_LowerRight_X_Window5,X coordinate" line.long 0x124 "diseng_sig0_Ref_R_Window5,Window 5. Reference CRC Value of Red Channel" hexmask.long 0x124 0.--31. 1. "diseng_sig0_Ref_R_Window5,Reference value that is compared against measured CRC_R value" line.long 0x128 "diseng_sig0_Ref_G_Window5,Window 5. Reference CRC Value of Green Channel" hexmask.long 0x128 0.--31. 1. "diseng_sig0_Ref_G_Window5,Reference value that is compared against measured CRC_G value" line.long 0x12C "diseng_sig0_Ref_B_Window5,Window 5. Reference CRC Value of Blue Channel" hexmask.long 0x12C 0.--31. 1. "diseng_sig0_Ref_B_Window5,Reference value that is compared against measured CRC_B value" line.long 0x130 "diseng_sig0_Control_Window6,Window 6. Control settings" bitfld.long 0x130 17. "diseng_sig0_GlobalPanic_Window6,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x130 16. "diseng_sig0_LocalPanic_Window6,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x130 10. "diseng_sig0_AlphaSel_Window6,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x130 9. "diseng_sig0_AlphaInv_Window6,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x130 8. "diseng_sig0_AlphaMask_Window6,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x130 1. "diseng_sig0_CRC_Window6,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x130 0. "diseng_sig0_En_Window6,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x134 "diseng_sig0_UpperLeft_Window6,Window 6. Upper Left Coordinates" hexmask.long.word 0x134 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window6,Y coordinate" newline hexmask.long.word 0x134 0.--13. 1. "diseng_sig0_UpperLeft_X_Window6,X coordinate" line.long 0x138 "diseng_sig0_LowerRight_Window6,Window 6. Lower Right Coordinates" hexmask.long.word 0x138 16.--29. 1. "diseng_sig0_LowerRight_Y_Window6,Y coordinate" newline hexmask.long.word 0x138 0.--13. 1. "diseng_sig0_LowerRight_X_Window6,X coordinate" line.long 0x13C "diseng_sig0_Ref_R_Window6,Window 6. Reference CRC Value of Red Channel" hexmask.long 0x13C 0.--31. 1. "diseng_sig0_Ref_R_Window6,Reference value that is compared against measured CRC_R value" line.long 0x140 "diseng_sig0_Ref_G_Window6,Window 6. Reference CRC Value of Green Channel" hexmask.long 0x140 0.--31. 1. "diseng_sig0_Ref_G_Window6,Reference value that is compared against measured CRC_G value" line.long 0x144 "diseng_sig0_Ref_B_Window6,Window 6. Reference CRC Value of Blue Channel" hexmask.long 0x144 0.--31. 1. "diseng_sig0_Ref_B_Window6,Reference value that is compared against measured CRC_B value" line.long 0x148 "diseng_sig0_Control_Window7,Window 7. Control settings" bitfld.long 0x148 17. "diseng_sig0_GlobalPanic_Window7,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x148 16. "diseng_sig0_LocalPanic_Window7,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x148 10. "diseng_sig0_AlphaSel_Window7,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x148 9. "diseng_sig0_AlphaInv_Window7,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x148 8. "diseng_sig0_AlphaMask_Window7,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x148 1. "diseng_sig0_CRC_Window7,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x148 0. "diseng_sig0_En_Window7,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x14C "diseng_sig0_UpperLeft_Window7,Window 7. Upper Left Coordinates" hexmask.long.word 0x14C 16.--29. 1. "diseng_sig0_UpperLeft_Y_Window7,Y coordinate" newline hexmask.long.word 0x14C 0.--13. 1. "diseng_sig0_UpperLeft_X_Window7,X coordinate" line.long 0x150 "diseng_sig0_LowerRight_Window7,Window 7. Lower Right Coordinates" hexmask.long.word 0x150 16.--29. 1. "diseng_sig0_LowerRight_Y_Window7,Y coordinate" newline hexmask.long.word 0x150 0.--13. 1. "diseng_sig0_LowerRight_X_Window7,X coordinate" line.long 0x154 "diseng_sig0_Ref_R_Window7,Window 7. Reference CRC Value of Red Channel" hexmask.long 0x154 0.--31. 1. "diseng_sig0_Ref_R_Window7,Reference value that is compared against measured CRC_R value" line.long 0x158 "diseng_sig0_Ref_G_Window7,Window 7. Reference CRC Value of Green Channel" hexmask.long 0x158 0.--31. 1. "diseng_sig0_Ref_G_Window7,Reference value that is compared against measured CRC_G value" line.long 0x15C "diseng_sig0_Ref_B_Window7,Window 7. Reference CRC Value of Blue Channel" hexmask.long 0x15C 0.--31. 1. "diseng_sig0_Ref_B_Window7,Reference value that is compared against measured CRC_B value" line.long 0x160 "diseng_sig0_Control_Cluster0,Cluster 0. Control settings" hexmask.long.byte 0x160 24.--31. 1. "diseng_sig0_MaskRed_Cluster0,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x160 16.--23. 1. "diseng_sig0_MaskGreen_Cluster0,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x160 8.--15. 1. "diseng_sig0_MaskBlue_Cluster0,Bit mask applied to blue channel before sampling" newline bitfld.long 0x160 7. "diseng_sig0_Pix3_En_Cluster0,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x160 6. "diseng_sig0_Pix2_En_Cluster0,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x160 5. "diseng_sig0_Pix1_En_Cluster0,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x160 4. "diseng_sig0_Pix0_En_Cluster0,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x160 0. "diseng_sig0_En_Cluster0,Cluster 0 enable" "0,1" line.long 0x164 "diseng_sig0_Pix0_Cluster0,Cluster 0. Coordinate of Pixel 0" hexmask.long.word 0x164 16.--29. 1. "diseng_sig0_Y0_Cluster0,Vertical coordinate of pixel 0" newline hexmask.long.word 0x164 0.--13. 1. "diseng_sig0_X0_Cluster0,Horizontal coordinate of pixel 0" line.long 0x168 "diseng_sig0_Pix1_Cluster0,Cluster 0. Coordinate of Pixel 1" hexmask.long.word 0x168 16.--29. 1. "diseng_sig0_Y1_Cluster0,Vertical coordinate of pixel 1" newline hexmask.long.word 0x168 0.--13. 1. "diseng_sig0_X1_Cluster0,Horizontal coordinate of pixel 1" line.long 0x16C "diseng_sig0_Pix2_Cluster0,Cluster 0. Coordinate of Pixel 2" hexmask.long.word 0x16C 16.--29. 1. "diseng_sig0_Y2_Cluster0,Vertical coordinate of pixel 2" newline hexmask.long.word 0x16C 0.--13. 1. "diseng_sig0_X2_Cluster0,Horizontal coordinate of pixel 2" line.long 0x170 "diseng_sig0_Pix3_Cluster0,Cluster 0. Coordinate of Pixel 3" hexmask.long.word 0x170 16.--29. 1. "diseng_sig0_Y3_Cluster0,Vertical coordinate of pixel 3" newline hexmask.long.word 0x170 0.--13. 1. "diseng_sig0_X3_Cluster0,Horizontal coordinate of pixel 3" line.long 0x174 "diseng_sig0_Ref0_Cluster0,Cluster 0. Reference Vector 0" hexmask.long.tbyte 0x174 0.--23. 1. "diseng_sig0_Ref0_Cluster0,Reference value." line.long 0x178 "diseng_sig0_Ref1_Cluster0,Cluster 0. Reference Vector 1" hexmask.long.tbyte 0x178 0.--23. 1. "diseng_sig0_Ref1_Cluster0,Reference value." line.long 0x17C "diseng_sig0_Control_Cluster1,Cluster 1. Control settings" hexmask.long.byte 0x17C 24.--31. 1. "diseng_sig0_MaskRed_Cluster1,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x17C 16.--23. 1. "diseng_sig0_MaskGreen_Cluster1,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x17C 8.--15. 1. "diseng_sig0_MaskBlue_Cluster1,Bit mask applied to blue channel before sampling" newline bitfld.long 0x17C 7. "diseng_sig0_Pix3_En_Cluster1,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x17C 6. "diseng_sig0_Pix2_En_Cluster1,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x17C 5. "diseng_sig0_Pix1_En_Cluster1,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x17C 4. "diseng_sig0_Pix0_En_Cluster1,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x17C 0. "diseng_sig0_En_Cluster1,Cluster 1 enable" "0,1" line.long 0x180 "diseng_sig0_Pix0_Cluster1,Cluster 1. Coordinate of Pixel 0" hexmask.long.word 0x180 16.--29. 1. "diseng_sig0_Y0_Cluster1,Vertical coordinate of pixel 0" newline hexmask.long.word 0x180 0.--13. 1. "diseng_sig0_X0_Cluster1,Horizontal coordinate of pixel 0" line.long 0x184 "diseng_sig0_Pix1_Cluster1,Cluster 1. Coordinate of Pixel 1" hexmask.long.word 0x184 16.--29. 1. "diseng_sig0_Y1_Cluster1,Vertical coordinate of pixel 1" newline hexmask.long.word 0x184 0.--13. 1. "diseng_sig0_X1_Cluster1,Horizontal coordinate of pixel 1" line.long 0x188 "diseng_sig0_Pix2_Cluster1,Cluster 1. Coordinate of Pixel 2" hexmask.long.word 0x188 16.--29. 1. "diseng_sig0_Y2_Cluster1,Vertical coordinate of pixel 2" newline hexmask.long.word 0x188 0.--13. 1. "diseng_sig0_X2_Cluster1,Horizontal coordinate of pixel 2" line.long 0x18C "diseng_sig0_Pix3_Cluster1,Cluster 1. Coordinate of Pixel 3" hexmask.long.word 0x18C 16.--29. 1. "diseng_sig0_Y3_Cluster1,Vertical coordinate of pixel 3" newline hexmask.long.word 0x18C 0.--13. 1. "diseng_sig0_X3_Cluster1,Horizontal coordinate of pixel 3" line.long 0x190 "diseng_sig0_Ref0_Cluster1,Cluster 1. Reference Vector 0" hexmask.long.tbyte 0x190 0.--23. 1. "diseng_sig0_Ref0_Cluster1,Reference value." line.long 0x194 "diseng_sig0_Ref1_Cluster1,Cluster 1. Reference Vector 1" hexmask.long.tbyte 0x194 0.--23. 1. "diseng_sig0_Ref1_Cluster1,Reference value." line.long 0x198 "diseng_sig0_Control_Cluster2,Cluster 2. Control settings" hexmask.long.byte 0x198 24.--31. 1. "diseng_sig0_MaskRed_Cluster2,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x198 16.--23. 1. "diseng_sig0_MaskGreen_Cluster2,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x198 8.--15. 1. "diseng_sig0_MaskBlue_Cluster2,Bit mask applied to blue channel before sampling" newline bitfld.long 0x198 7. "diseng_sig0_Pix3_En_Cluster2,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x198 6. "diseng_sig0_Pix2_En_Cluster2,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x198 5. "diseng_sig0_Pix1_En_Cluster2,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x198 4. "diseng_sig0_Pix0_En_Cluster2,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x198 0. "diseng_sig0_En_Cluster2,Cluster 2 enable" "0,1" line.long 0x19C "diseng_sig0_Pix0_Cluster2,Cluster 2. Coordinate of Pixel 0" hexmask.long.word 0x19C 16.--29. 1. "diseng_sig0_Y0_Cluster2,Vertical coordinate of pixel 0" newline hexmask.long.word 0x19C 0.--13. 1. "diseng_sig0_X0_Cluster2,Horizontal coordinate of pixel 0" line.long 0x1A0 "diseng_sig0_Pix1_Cluster2,Cluster 2. Coordinate of Pixel 1" hexmask.long.word 0x1A0 16.--29. 1. "diseng_sig0_Y1_Cluster2,Vertical coordinate of pixel 1" newline hexmask.long.word 0x1A0 0.--13. 1. "diseng_sig0_X1_Cluster2,Horizontal coordinate of pixel 1" line.long 0x1A4 "diseng_sig0_Pix2_Cluster2,Cluster 2. Coordinate of Pixel 2" hexmask.long.word 0x1A4 16.--29. 1. "diseng_sig0_Y2_Cluster2,Vertical coordinate of pixel 2" newline hexmask.long.word 0x1A4 0.--13. 1. "diseng_sig0_X2_Cluster2,Horizontal coordinate of pixel 2" line.long 0x1A8 "diseng_sig0_Pix3_Cluster2,Cluster 2. Coordinate of Pixel 3" hexmask.long.word 0x1A8 16.--29. 1. "diseng_sig0_Y3_Cluster2,Vertical coordinate of pixel 3" newline hexmask.long.word 0x1A8 0.--13. 1. "diseng_sig0_X3_Cluster2,Horizontal coordinate of pixel 3" line.long 0x1AC "diseng_sig0_Ref0_Cluster2,Cluster 2. Reference Vector 0" hexmask.long.tbyte 0x1AC 0.--23. 1. "diseng_sig0_Ref0_Cluster2,Reference value." line.long 0x1B0 "diseng_sig0_Ref1_Cluster2,Cluster 2. Reference Vector 1" hexmask.long.tbyte 0x1B0 0.--23. 1. "diseng_sig0_Ref1_Cluster2,Reference value." line.long 0x1B4 "diseng_sig0_Control_Cluster3,Cluster 3. Control settings" hexmask.long.byte 0x1B4 24.--31. 1. "diseng_sig0_MaskRed_Cluster3,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x1B4 16.--23. 1. "diseng_sig0_MaskGreen_Cluster3,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x1B4 8.--15. 1. "diseng_sig0_MaskBlue_Cluster3,Bit mask applied to blue channel before sampling" newline bitfld.long 0x1B4 7. "diseng_sig0_Pix3_En_Cluster3,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x1B4 6. "diseng_sig0_Pix2_En_Cluster3,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x1B4 5. "diseng_sig0_Pix1_En_Cluster3,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x1B4 4. "diseng_sig0_Pix0_En_Cluster3,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x1B4 0. "diseng_sig0_En_Cluster3,Cluster 3 enable" "0,1" line.long 0x1B8 "diseng_sig0_Pix0_Cluster3,Cluster 3. Coordinate of Pixel 0" hexmask.long.word 0x1B8 16.--29. 1. "diseng_sig0_Y0_Cluster3,Vertical coordinate of pixel 0" newline hexmask.long.word 0x1B8 0.--13. 1. "diseng_sig0_X0_Cluster3,Horizontal coordinate of pixel 0" line.long 0x1BC "diseng_sig0_Pix1_Cluster3,Cluster 3. Coordinate of Pixel 1" hexmask.long.word 0x1BC 16.--29. 1. "diseng_sig0_Y1_Cluster3,Vertical coordinate of pixel 1" newline hexmask.long.word 0x1BC 0.--13. 1. "diseng_sig0_X1_Cluster3,Horizontal coordinate of pixel 1" line.long 0x1C0 "diseng_sig0_Pix2_Cluster3,Cluster 3. Coordinate of Pixel 2" hexmask.long.word 0x1C0 16.--29. 1. "diseng_sig0_Y2_Cluster3,Vertical coordinate of pixel 2" newline hexmask.long.word 0x1C0 0.--13. 1. "diseng_sig0_X2_Cluster3,Horizontal coordinate of pixel 2" line.long 0x1C4 "diseng_sig0_Pix3_Cluster3,Cluster 3. Coordinate of Pixel 3" hexmask.long.word 0x1C4 16.--29. 1. "diseng_sig0_Y3_Cluster3,Vertical coordinate of pixel 3" newline hexmask.long.word 0x1C4 0.--13. 1. "diseng_sig0_X3_Cluster3,Horizontal coordinate of pixel 3" line.long 0x1C8 "diseng_sig0_Ref0_Cluster3,Cluster 3. Reference Vector 0" hexmask.long.tbyte 0x1C8 0.--23. 1. "diseng_sig0_Ref0_Cluster3,Reference value." line.long 0x1CC "diseng_sig0_Ref1_Cluster3,Cluster 3. Reference Vector 1" hexmask.long.tbyte 0x1CC 0.--23. 1. "diseng_sig0_Ref1_Cluster3,Reference value." rgroup.long 0x2D0400++0x18F line.long 0x0 "diseng_sig0_CRC_R_Window0,Window 0. Measured CRC Value of Red Channel" hexmask.long 0x0 0.--31. 1. "diseng_sig0_CRC_R_Window0,CRC value from red channel" line.long 0x4 "diseng_sig0_CRC_G_Window0,Window 0. Measured CRC Value of Green Channel" hexmask.long 0x4 0.--31. 1. "diseng_sig0_CRC_G_Window0,CRC value from green channel" line.long 0x8 "diseng_sig0_CRC_B_Window0,Window 0. Measured CRC Value of Blue Channel" hexmask.long 0x8 0.--31. 1. "diseng_sig0_CRC_B_Window0,CRC value from blue channel" line.long 0xC "diseng_sig0_CRC_R_Window1,Window 1. Measured CRC Value of Red Channel" hexmask.long 0xC 0.--31. 1. "diseng_sig0_CRC_R_Window1,CRC value from red channel" line.long 0x10 "diseng_sig0_CRC_G_Window1,Window 1. Measured CRC Value of Green Channel" hexmask.long 0x10 0.--31. 1. "diseng_sig0_CRC_G_Window1,CRC value from green channel" line.long 0x14 "diseng_sig0_CRC_B_Window1,Window 1. Measured CRC Value of Blue Channel" hexmask.long 0x14 0.--31. 1. "diseng_sig0_CRC_B_Window1,CRC value from blue channel" line.long 0x18 "diseng_sig0_CRC_R_Window2,Window 2. Measured CRC Value of Red Channel" hexmask.long 0x18 0.--31. 1. "diseng_sig0_CRC_R_Window2,CRC value from red channel" line.long 0x1C "diseng_sig0_CRC_G_Window2,Window 2. Measured CRC Value of Green Channel" hexmask.long 0x1C 0.--31. 1. "diseng_sig0_CRC_G_Window2,CRC value from green channel" line.long 0x20 "diseng_sig0_CRC_B_Window2,Window 2. Measured CRC Value of Blue Channel" hexmask.long 0x20 0.--31. 1. "diseng_sig0_CRC_B_Window2,CRC value from blue channel" line.long 0x24 "diseng_sig0_CRC_R_Window3,Window 3. Measured CRC Value of Red Channel" hexmask.long 0x24 0.--31. 1. "diseng_sig0_CRC_R_Window3,CRC value from red channel" line.long 0x28 "diseng_sig0_CRC_G_Window3,Window 3. Measured CRC Value of Green Channel" hexmask.long 0x28 0.--31. 1. "diseng_sig0_CRC_G_Window3,CRC value from green channel" line.long 0x2C "diseng_sig0_CRC_B_Window3,Window 3. Measured CRC Value of Blue Channel" hexmask.long 0x2C 0.--31. 1. "diseng_sig0_CRC_B_Window3,CRC value from blue channel" line.long 0x30 "diseng_sig0_CRC_R_Window4,Window 4. Measured CRC Value of Red Channel" hexmask.long 0x30 0.--31. 1. "diseng_sig0_CRC_R_Window4,CRC value from red channel" line.long 0x34 "diseng_sig0_CRC_G_Window4,Window 4. Measured CRC Value of Green Channel" hexmask.long 0x34 0.--31. 1. "diseng_sig0_CRC_G_Window4,CRC value from green channel" line.long 0x38 "diseng_sig0_CRC_B_Window4,Window 4. Measured CRC Value of Blue Channel" hexmask.long 0x38 0.--31. 1. "diseng_sig0_CRC_B_Window4,CRC value from blue channel" line.long 0x3C "diseng_sig0_CRC_R_Window5,Window 5. Measured CRC Value of Red Channel" hexmask.long 0x3C 0.--31. 1. "diseng_sig0_CRC_R_Window5,CRC value from red channel" line.long 0x40 "diseng_sig0_CRC_G_Window5,Window 5. Measured CRC Value of Green Channel" hexmask.long 0x40 0.--31. 1. "diseng_sig0_CRC_G_Window5,CRC value from green channel" line.long 0x44 "diseng_sig0_CRC_B_Window5,Window 5. Measured CRC Value of Blue Channel" hexmask.long 0x44 0.--31. 1. "diseng_sig0_CRC_B_Window5,CRC value from blue channel" line.long 0x48 "diseng_sig0_CRC_R_Window6,Window 6. Measured CRC Value of Red Channel" hexmask.long 0x48 0.--31. 1. "diseng_sig0_CRC_R_Window6,CRC value from red channel" line.long 0x4C "diseng_sig0_CRC_G_Window6,Window 6. Measured CRC Value of Green Channel" hexmask.long 0x4C 0.--31. 1. "diseng_sig0_CRC_G_Window6,CRC value from green channel" line.long 0x50 "diseng_sig0_CRC_B_Window6,Window 6. Measured CRC Value of Blue Channel" hexmask.long 0x50 0.--31. 1. "diseng_sig0_CRC_B_Window6,CRC value from blue channel" line.long 0x54 "diseng_sig0_CRC_R_Window7,Window 7. Measured CRC Value of Red Channel" hexmask.long 0x54 0.--31. 1. "diseng_sig0_CRC_R_Window7,CRC value from red channel" line.long 0x58 "diseng_sig0_CRC_G_Window7,Window 7. Measured CRC Value of Green Channel" hexmask.long 0x58 0.--31. 1. "diseng_sig0_CRC_G_Window7,CRC value from green channel" line.long 0x5C "diseng_sig0_CRC_B_Window7,Window 7. Measured CRC Value of Blue Channel" hexmask.long 0x5C 0.--31. 1. "diseng_sig0_CRC_B_Window7,CRC value from blue channel" line.long 0x60 "diseng_sig0_Status_Cluster0,Cluster 0. Status" bitfld.long 0x60 7. "diseng_sig0_Sts31_Cluster0,Evaluation of Vector3_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 6. "diseng_sig0_Sts30_Cluster0,Evaluation of Vector3_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 5. "diseng_sig0_Sts21_Cluster0,Evaluation of Vector2_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 4. "diseng_sig0_Sts20_Cluster0,Evaluation of Vector2_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 3. "diseng_sig0_Sts11_Cluster0,Evaluation of Vector1_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 2. "diseng_sig0_Sts10_Cluster0,Evaluation of Vector1_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 1. "diseng_sig0_Sts01_Cluster0,Evaluation of Vector0_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 0. "diseng_sig0_Sts00_Cluster0,Evaluation of Vector0_Cluster0 against reference Ref0_Cluster0" "0,1" line.long 0x64 "diseng_sig0_Counter_Cluster0,Cluster 0. Match and Error Counters" hexmask.long.byte 0x64 16.--23. 1. "diseng_sig0_ErrorCount_Cluster0,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x64 0.--7. 1. "diseng_sig0_MatchCount_Cluster0,Number of evaluations where at least one match occurred" line.long 0x68 "diseng_sig0_Vector0_Cluster0,Cluster 0. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x68 22.--23. "diseng_sig0_Pix3_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 20.--21. "diseng_sig0_Pix3_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 18.--19. "diseng_sig0_Pix3_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 16.--17. "diseng_sig0_Pix2_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 14.--15. "diseng_sig0_Pix2_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 12.--13. "diseng_sig0_Pix2_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 10.--11. "diseng_sig0_Pix1_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 8.--9. "diseng_sig0_Pix1_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 6.--7. "diseng_sig0_Pix1_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 4.--5. "diseng_sig0_Pix0_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x68 2.--3. "diseng_sig0_Pix0_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x68 0.--1. "diseng_sig0_Pix0_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x6C "diseng_sig0_Vector1_Cluster0,Cluster 0. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x6C 22.--23. "diseng_sig0_Pix3_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 20.--21. "diseng_sig0_Pix3_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 18.--19. "diseng_sig0_Pix3_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 16.--17. "diseng_sig0_Pix2_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 14.--15. "diseng_sig0_Pix2_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 12.--13. "diseng_sig0_Pix2_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 10.--11. "diseng_sig0_Pix1_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 8.--9. "diseng_sig0_Pix1_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 6.--7. "diseng_sig0_Pix1_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 4.--5. "diseng_sig0_Pix0_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x6C 2.--3. "diseng_sig0_Pix0_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x6C 0.--1. "diseng_sig0_Pix0_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x70 "diseng_sig0_Vector2_Cluster0,Cluster 0. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0x70 22.--23. "diseng_sig0_Pix3_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 20.--21. "diseng_sig0_Pix3_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 18.--19. "diseng_sig0_Pix3_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 16.--17. "diseng_sig0_Pix2_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 14.--15. "diseng_sig0_Pix2_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 12.--13. "diseng_sig0_Pix2_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 10.--11. "diseng_sig0_Pix1_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 8.--9. "diseng_sig0_Pix1_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 6.--7. "diseng_sig0_Pix1_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 4.--5. "diseng_sig0_Pix0_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x70 2.--3. "diseng_sig0_Pix0_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x70 0.--1. "diseng_sig0_Pix0_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x74 "diseng_sig0_Vector3_Cluster0,Cluster 0. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0x74 22.--23. "diseng_sig0_Pix3_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 20.--21. "diseng_sig0_Pix3_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 18.--19. "diseng_sig0_Pix3_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 16.--17. "diseng_sig0_Pix2_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 14.--15. "diseng_sig0_Pix2_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 12.--13. "diseng_sig0_Pix2_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 10.--11. "diseng_sig0_Pix1_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 8.--9. "diseng_sig0_Pix1_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 6.--7. "diseng_sig0_Pix1_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 4.--5. "diseng_sig0_Pix0_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x74 2.--3. "diseng_sig0_Pix0_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x74 0.--1. "diseng_sig0_Pix0_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x78 "diseng_sig0_Status_Cluster1,Cluster 1. Status" bitfld.long 0x78 7. "diseng_sig0_Sts31_Cluster1,Evaluation of Vector3_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 6. "diseng_sig0_Sts30_Cluster1,Evaluation of Vector3_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 5. "diseng_sig0_Sts21_Cluster1,Evaluation of Vector2_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 4. "diseng_sig0_Sts20_Cluster1,Evaluation of Vector2_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 3. "diseng_sig0_Sts11_Cluster1,Evaluation of Vector1_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 2. "diseng_sig0_Sts10_Cluster1,Evaluation of Vector1_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 1. "diseng_sig0_Sts01_Cluster1,Evaluation of Vector0_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 0. "diseng_sig0_Sts00_Cluster1,Evaluation of Vector0_Cluster1 against reference Ref0_Cluster1" "0,1" line.long 0x7C "diseng_sig0_Counter_Cluster1,Cluster 1. Match and Error Counters" hexmask.long.byte 0x7C 16.--23. 1. "diseng_sig0_ErrorCount_Cluster1,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x7C 0.--7. 1. "diseng_sig0_MatchCount_Cluster1,Number of evaluations where at least one match occurred" line.long 0x80 "diseng_sig0_Vector0_Cluster1,Cluster 1. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x80 22.--23. "diseng_sig0_Pix3_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 20.--21. "diseng_sig0_Pix3_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 18.--19. "diseng_sig0_Pix3_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 16.--17. "diseng_sig0_Pix2_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 14.--15. "diseng_sig0_Pix2_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 12.--13. "diseng_sig0_Pix2_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 10.--11. "diseng_sig0_Pix1_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 8.--9. "diseng_sig0_Pix1_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 6.--7. "diseng_sig0_Pix1_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 4.--5. "diseng_sig0_Pix0_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x80 2.--3. "diseng_sig0_Pix0_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x80 0.--1. "diseng_sig0_Pix0_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x84 "diseng_sig0_Vector1_Cluster1,Cluster 1. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x84 22.--23. "diseng_sig0_Pix3_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 20.--21. "diseng_sig0_Pix3_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 18.--19. "diseng_sig0_Pix3_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 16.--17. "diseng_sig0_Pix2_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 14.--15. "diseng_sig0_Pix2_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 12.--13. "diseng_sig0_Pix2_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 10.--11. "diseng_sig0_Pix1_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 8.--9. "diseng_sig0_Pix1_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 6.--7. "diseng_sig0_Pix1_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 4.--5. "diseng_sig0_Pix0_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x84 2.--3. "diseng_sig0_Pix0_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x84 0.--1. "diseng_sig0_Pix0_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x88 "diseng_sig0_Vector2_Cluster1,Cluster 1. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0x88 22.--23. "diseng_sig0_Pix3_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 20.--21. "diseng_sig0_Pix3_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 18.--19. "diseng_sig0_Pix3_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 16.--17. "diseng_sig0_Pix2_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 14.--15. "diseng_sig0_Pix2_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 12.--13. "diseng_sig0_Pix2_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 10.--11. "diseng_sig0_Pix1_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 8.--9. "diseng_sig0_Pix1_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 6.--7. "diseng_sig0_Pix1_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 4.--5. "diseng_sig0_Pix0_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x88 2.--3. "diseng_sig0_Pix0_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x88 0.--1. "diseng_sig0_Pix0_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x8C "diseng_sig0_Vector3_Cluster1,Cluster 1. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0x8C 22.--23. "diseng_sig0_Pix3_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 20.--21. "diseng_sig0_Pix3_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 18.--19. "diseng_sig0_Pix3_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 16.--17. "diseng_sig0_Pix2_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 14.--15. "diseng_sig0_Pix2_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 12.--13. "diseng_sig0_Pix2_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 10.--11. "diseng_sig0_Pix1_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 8.--9. "diseng_sig0_Pix1_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 6.--7. "diseng_sig0_Pix1_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 4.--5. "diseng_sig0_Pix0_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x8C 2.--3. "diseng_sig0_Pix0_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x8C 0.--1. "diseng_sig0_Pix0_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x90 "diseng_sig0_Status_Cluster2,Cluster 2. Status" bitfld.long 0x90 7. "diseng_sig0_Sts31_Cluster2,Evaluation of Vector3_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 6. "diseng_sig0_Sts30_Cluster2,Evaluation of Vector3_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 5. "diseng_sig0_Sts21_Cluster2,Evaluation of Vector2_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 4. "diseng_sig0_Sts20_Cluster2,Evaluation of Vector2_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 3. "diseng_sig0_Sts11_Cluster2,Evaluation of Vector1_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 2. "diseng_sig0_Sts10_Cluster2,Evaluation of Vector1_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 1. "diseng_sig0_Sts01_Cluster2,Evaluation of Vector0_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 0. "diseng_sig0_Sts00_Cluster2,Evaluation of Vector0_Cluster2 against reference Ref0_Cluster2" "0,1" line.long 0x94 "diseng_sig0_Counter_Cluster2,Cluster 2. Match and Error Counters" hexmask.long.byte 0x94 16.--23. 1. "diseng_sig0_ErrorCount_Cluster2,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x94 0.--7. 1. "diseng_sig0_MatchCount_Cluster2,Number of evaluations where at least one match occurred" line.long 0x98 "diseng_sig0_Vector0_Cluster2,Cluster 2. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x98 22.--23. "diseng_sig0_Pix3_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 20.--21. "diseng_sig0_Pix3_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 18.--19. "diseng_sig0_Pix3_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 16.--17. "diseng_sig0_Pix2_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 14.--15. "diseng_sig0_Pix2_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 12.--13. "diseng_sig0_Pix2_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 10.--11. "diseng_sig0_Pix1_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 8.--9. "diseng_sig0_Pix1_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 6.--7. "diseng_sig0_Pix1_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 4.--5. "diseng_sig0_Pix0_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x98 2.--3. "diseng_sig0_Pix0_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x98 0.--1. "diseng_sig0_Pix0_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0x9C "diseng_sig0_Vector1_Cluster2,Cluster 2. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x9C 22.--23. "diseng_sig0_Pix3_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 20.--21. "diseng_sig0_Pix3_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 18.--19. "diseng_sig0_Pix3_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 16.--17. "diseng_sig0_Pix2_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 14.--15. "diseng_sig0_Pix2_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 12.--13. "diseng_sig0_Pix2_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 10.--11. "diseng_sig0_Pix1_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 8.--9. "diseng_sig0_Pix1_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 6.--7. "diseng_sig0_Pix1_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 4.--5. "diseng_sig0_Pix0_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x9C 2.--3. "diseng_sig0_Pix0_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x9C 0.--1. "diseng_sig0_Pix0_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA0 "diseng_sig0_Vector2_Cluster2,Cluster 2. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0xA0 22.--23. "diseng_sig0_Pix3_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 20.--21. "diseng_sig0_Pix3_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 18.--19. "diseng_sig0_Pix3_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 16.--17. "diseng_sig0_Pix2_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 14.--15. "diseng_sig0_Pix2_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 12.--13. "diseng_sig0_Pix2_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 10.--11. "diseng_sig0_Pix1_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 8.--9. "diseng_sig0_Pix1_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 6.--7. "diseng_sig0_Pix1_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 4.--5. "diseng_sig0_Pix0_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA0 2.--3. "diseng_sig0_Pix0_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA0 0.--1. "diseng_sig0_Pix0_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA4 "diseng_sig0_Vector3_Cluster2,Cluster 2. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0xA4 22.--23. "diseng_sig0_Pix3_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 20.--21. "diseng_sig0_Pix3_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 18.--19. "diseng_sig0_Pix3_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 16.--17. "diseng_sig0_Pix2_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 14.--15. "diseng_sig0_Pix2_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 12.--13. "diseng_sig0_Pix2_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 10.--11. "diseng_sig0_Pix1_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 8.--9. "diseng_sig0_Pix1_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 6.--7. "diseng_sig0_Pix1_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 4.--5. "diseng_sig0_Pix0_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA4 2.--3. "diseng_sig0_Pix0_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA4 0.--1. "diseng_sig0_Pix0_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA8 "diseng_sig0_Status_Cluster3,Cluster 3. Status" bitfld.long 0xA8 7. "diseng_sig0_Sts31_Cluster3,Evaluation of Vector3_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 6. "diseng_sig0_Sts30_Cluster3,Evaluation of Vector3_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 5. "diseng_sig0_Sts21_Cluster3,Evaluation of Vector2_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 4. "diseng_sig0_Sts20_Cluster3,Evaluation of Vector2_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 3. "diseng_sig0_Sts11_Cluster3,Evaluation of Vector1_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 2. "diseng_sig0_Sts10_Cluster3,Evaluation of Vector1_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 1. "diseng_sig0_Sts01_Cluster3,Evaluation of Vector0_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 0. "diseng_sig0_Sts00_Cluster3,Evaluation of Vector0_Cluster3 against reference Ref0_Cluster3" "0,1" line.long 0xAC "diseng_sig0_Counter_Cluster3,Cluster 3. Match and Error Counters" hexmask.long.byte 0xAC 16.--23. 1. "diseng_sig0_ErrorCount_Cluster3,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0xAC 0.--7. 1. "diseng_sig0_MatchCount_Cluster3,Number of evaluations where at least one match occurred" line.long 0xB0 "diseng_sig0_Vector0_Cluster3,Cluster 3. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0xB0 22.--23. "diseng_sig0_Pix3_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 20.--21. "diseng_sig0_Pix3_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 18.--19. "diseng_sig0_Pix3_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 16.--17. "diseng_sig0_Pix2_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 14.--15. "diseng_sig0_Pix2_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 12.--13. "diseng_sig0_Pix2_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 10.--11. "diseng_sig0_Pix1_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 8.--9. "diseng_sig0_Pix1_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 6.--7. "diseng_sig0_Pix1_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 4.--5. "diseng_sig0_Pix0_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB0 2.--3. "diseng_sig0_Pix0_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB0 0.--1. "diseng_sig0_Pix0_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xB4 "diseng_sig0_Vector1_Cluster3,Cluster 3. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0xB4 22.--23. "diseng_sig0_Pix3_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 20.--21. "diseng_sig0_Pix3_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 18.--19. "diseng_sig0_Pix3_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 16.--17. "diseng_sig0_Pix2_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 14.--15. "diseng_sig0_Pix2_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 12.--13. "diseng_sig0_Pix2_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 10.--11. "diseng_sig0_Pix1_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 8.--9. "diseng_sig0_Pix1_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 6.--7. "diseng_sig0_Pix1_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 4.--5. "diseng_sig0_Pix0_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB4 2.--3. "diseng_sig0_Pix0_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB4 0.--1. "diseng_sig0_Pix0_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xB8 "diseng_sig0_Vector2_Cluster3,Cluster 3. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0xB8 22.--23. "diseng_sig0_Pix3_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 20.--21. "diseng_sig0_Pix3_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 18.--19. "diseng_sig0_Pix3_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 16.--17. "diseng_sig0_Pix2_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 14.--15. "diseng_sig0_Pix2_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 12.--13. "diseng_sig0_Pix2_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 10.--11. "diseng_sig0_Pix1_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 8.--9. "diseng_sig0_Pix1_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 6.--7. "diseng_sig0_Pix1_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 4.--5. "diseng_sig0_Pix0_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB8 2.--3. "diseng_sig0_Pix0_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB8 0.--1. "diseng_sig0_Pix0_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xBC "diseng_sig0_Vector3_Cluster3,Cluster 3. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0xBC 22.--23. "diseng_sig0_Pix3_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 20.--21. "diseng_sig0_Pix3_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 18.--19. "diseng_sig0_Pix3_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 16.--17. "diseng_sig0_Pix2_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 14.--15. "diseng_sig0_Pix2_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 12.--13. "diseng_sig0_Pix2_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 10.--11. "diseng_sig0_Pix1_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 8.--9. "diseng_sig0_Pix1_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 6.--7. "diseng_sig0_Pix1_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 4.--5. "diseng_sig0_Pix0_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xBC 2.--3. "diseng_sig0_Pix0_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xBC 0.--1. "diseng_sig0_Pix0_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xC0 "diseng_sig0_PixCnt_Stats0_Win0,Pixel Counter Register. Statistics Block 0. Window 0" hexmask.long 0xC0 0.--27. 1. "diseng_sig0_Px_Cnt_S0_Win0,Pixel counter determines number of valid pixels in related window." line.long 0xC4 "diseng_sig0_PixMax_Stats0_Win0,Pixel Max Values Register. Statistics Block 0. Window 0" hexmask.long.byte 0xC4 16.--23. 1. "diseng_sig0_Rd_Max_S0_Win0,Max value of red component of pixels in related window." newline hexmask.long.byte 0xC4 8.--15. 1. "diseng_sig0_Gn_Max_S0_Win0,Max value of green component of pixels in related window." newline hexmask.long.byte 0xC4 0.--7. 1. "diseng_sig0_Bl_Max_S0_Win0,Max value of blue component of pixels in related window." line.long 0xC8 "diseng_sig0_PixMin_Stats0_Win0,Pixel Min Values Register. Statistics Block 0. Window 0" hexmask.long.byte 0xC8 16.--23. 1. "diseng_sig0_Rd_Min_S0_Win0,Min value of red component of pixels in related window." newline hexmask.long.byte 0xC8 8.--15. 1. "diseng_sig0_Gn_Min_S0_Win0,Min value of green component of pixels in related window." newline hexmask.long.byte 0xC8 0.--7. 1. "diseng_sig0_Bl_Min_S0_Win0,Min value of blue component of pixels in related window." line.long 0xCC "diseng_sig0_RedSum_Stats0_Win0,Red Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xCC 0.--31. 1. "diseng_sig0_Rd_Sum_S0_Win0,Sum of Red Component Values of Pixels in related Window." line.long 0xD0 "diseng_sig0_GreenSum_Stats0_Win0,Green Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD0 0.--31. 1. "diseng_sig0_Gn_Sum_S0_Win0,Sum of Green Component Values of Pixels in related Window." line.long 0xD4 "diseng_sig0_BlueSum_Stats0_Win0,Blue Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD4 0.--31. 1. "diseng_sig0_Bl_Sum_S0_Win0,Sum of Blue Component Values of Pixels in related Window." line.long 0xD8 "diseng_sig0_LumSum_Stats0_Win0,Luminance Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD8 0.--31. 1. "diseng_sig0_Lm_Sum_S0_Win0,Sum of Luminance Values of Pixels in related Window." line.long 0xDC "diseng_sig0_PixCnt_Stats1_Win0,Pixel Counter Register. Statistics Block 1. Window 0" hexmask.long 0xDC 0.--27. 1. "diseng_sig0_Px_Cnt_S1_Win0,Pixel counter determines number of valid pixels in related window." line.long 0xE0 "diseng_sig0_PixMax_Stats1_Win0,Pixel Max Values Register. Statistics Block 1. Window 0" hexmask.long.byte 0xE0 16.--23. 1. "diseng_sig0_Rd_Max_S1_Win0,Max value of red component of pixels in related window." newline hexmask.long.byte 0xE0 8.--15. 1. "diseng_sig0_Gn_Max_S1_Win0,Max value of green component of pixels in related window." newline hexmask.long.byte 0xE0 0.--7. 1. "diseng_sig0_Bl_Max_S1_Win0,Max value of blue component of pixels in related window." line.long 0xE4 "diseng_sig0_PixMin_Stats1_Win0,Pixel Min Values Register. Statistics Block 1. Window 0" hexmask.long.byte 0xE4 16.--23. 1. "diseng_sig0_Rd_Min_S1_Win0,Min value of red component of pixels in related window." newline hexmask.long.byte 0xE4 8.--15. 1. "diseng_sig0_Gn_Min_S1_Win0,Min value of green component of pixels in related window." newline hexmask.long.byte 0xE4 0.--7. 1. "diseng_sig0_Bl_Min_S1_Win0,Min value of blue component of pixels in related window." line.long 0xE8 "diseng_sig0_RedSum_Stats1_Win0,Red Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xE8 0.--31. 1. "diseng_sig0_Rd_Sum_S1_Win0,Sum of Red Component Values of Pixels in related Window." line.long 0xEC "diseng_sig0_GreenSum_Stats1_Win0,Green Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xEC 0.--31. 1. "diseng_sig0_Gn_Sum_S1_Win0,Sum of Green Component Values of Pixels in related Window." line.long 0xF0 "diseng_sig0_BlueSum_Stats1_Win0,Blue Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xF0 0.--31. 1. "diseng_sig0_Bl_Sum_S1_Win0,Sum of Blue Component Values of Pixels in related Window." line.long 0xF4 "diseng_sig0_PixCnt_Stats0_Win1,Pixel Counter Register. Statistics Block 0. Window 1" hexmask.long 0xF4 0.--27. 1. "diseng_sig0_Px_Cnt_S0_Win1,Pixel counter determines number of valid pixels in related window." line.long 0xF8 "diseng_sig0_PixMax_Stats0_Win1,Pixel Max Values Register. Statistics Block 0. Window 1" hexmask.long.byte 0xF8 16.--23. 1. "diseng_sig0_Rd_Max_S0_Win1,Max value of red component of pixels in related window." newline hexmask.long.byte 0xF8 8.--15. 1. "diseng_sig0_Gn_Max_S0_Win1,Max value of green component of pixels in related window." newline hexmask.long.byte 0xF8 0.--7. 1. "diseng_sig0_Bl_Max_S0_Win1,Max value of blue component of pixels in related window." line.long 0xFC "diseng_sig0_PixMin_Stats0_Win1,Pixel Min Values Register. Statistics Block 0. Window 1" hexmask.long.byte 0xFC 16.--23. 1. "diseng_sig0_Rd_Min_S0_Win1,Min value of red component of pixels in related window." newline hexmask.long.byte 0xFC 8.--15. 1. "diseng_sig0_Gn_Min_S0_Win1,Min value of green component of pixels in related window." newline hexmask.long.byte 0xFC 0.--7. 1. "diseng_sig0_Bl_Min_S0_Win1,Min value of blue component of pixels in related window." line.long 0x100 "diseng_sig0_RedSum_Stats0_Win1,Red Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x100 0.--31. 1. "diseng_sig0_Rd_Sum_S0_Win1,Sum of Red Component Values of Pixels in related Window." line.long 0x104 "diseng_sig0_GreenSum_Stats0_Win1,Green Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x104 0.--31. 1. "diseng_sig0_Gn_Sum_S0_Win1,Sum of Green Component Values of Pixels in related Window." line.long 0x108 "diseng_sig0_BlueSum_Stats0_Win1,Blue Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x108 0.--31. 1. "diseng_sig0_Bl_Sum_S0_Win1,Sum of Blue Component Values of Pixels in related Window." line.long 0x10C "diseng_sig0_LumSum_Stats0_Win1,Luminance Sum Register. Statistics Block 0. Window 1" hexmask.long 0x10C 0.--31. 1. "diseng_sig0_Lm_Sum_S0_Win1,Sum of Luminance Values of Pixels in related Window." line.long 0x110 "diseng_sig0_PixCnt_Stats1_Win1,Pixel Counter Register. Statistics Block 1. Window 1" hexmask.long 0x110 0.--27. 1. "diseng_sig0_Px_Cnt_S1_Win1,Pixel counter determines number of valid pixels in related window." line.long 0x114 "diseng_sig0_PixMax_Stats1_Win1,Pixel Max Values Register. Statistics Block 1. Window 1" hexmask.long.byte 0x114 16.--23. 1. "diseng_sig0_Rd_Max_S1_Win1,Max value of red component of pixels in related window." newline hexmask.long.byte 0x114 8.--15. 1. "diseng_sig0_Gn_Max_S1_Win1,Max value of green component of pixels in related window." newline hexmask.long.byte 0x114 0.--7. 1. "diseng_sig0_Bl_Max_S1_Win1,Max value of blue component of pixels in related window." line.long 0x118 "diseng_sig0_PixMin_Stats1_Win1,Pixel Min Values Register. Statistics Block 1. Window 1" hexmask.long.byte 0x118 16.--23. 1. "diseng_sig0_Rd_Min_S1_Win1,Min value of red component of pixels in related window." newline hexmask.long.byte 0x118 8.--15. 1. "diseng_sig0_Gn_Min_S1_Win1,Min value of green component of pixels in related window." newline hexmask.long.byte 0x118 0.--7. 1. "diseng_sig0_Bl_Min_S1_Win1,Min value of blue component of pixels in related window." line.long 0x11C "diseng_sig0_RedSum_Stats1_Win1,Red Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x11C 0.--31. 1. "diseng_sig0_Rd_Sum_S1_Win1,Sum of Red Component Values of Pixels in related Window." line.long 0x120 "diseng_sig0_GreenSum_Stats1_Win1,Green Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x120 0.--31. 1. "diseng_sig0_Gn_Sum_S1_Win1,Sum of Green Component Values of Pixels in related Window." line.long 0x124 "diseng_sig0_BlueSum_Stats1_Win1,Blue Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x124 0.--31. 1. "diseng_sig0_Bl_Sum_S1_Win1,Sum of Blue Component Values of Pixels in related Window." line.long 0x128 "diseng_sig0_PixCnt_Stats0_Win2,Pixel Counter Register. Statistics Block 0. Window 2" hexmask.long 0x128 0.--27. 1. "diseng_sig0_Px_Cnt_S0_Win2,Pixel counter determines number of valid pixels in related window." line.long 0x12C "diseng_sig0_PixMax_Stats0_Win2,Pixel Max Values Register. Statistics Block 0. Window 2" hexmask.long.byte 0x12C 16.--23. 1. "diseng_sig0_Rd_Max_S0_Win2,Max value of red component of pixels in related window." newline hexmask.long.byte 0x12C 8.--15. 1. "diseng_sig0_Gn_Max_S0_Win2,Max value of green component of pixels in related window." newline hexmask.long.byte 0x12C 0.--7. 1. "diseng_sig0_Bl_Max_S0_Win2,Max value of blue component of pixels in related window." line.long 0x130 "diseng_sig0_PixMin_Stats0_Win2,Pixel Min Values Register. Statistics Block 0. Window 2" hexmask.long.byte 0x130 16.--23. 1. "diseng_sig0_Rd_Min_S0_Win2,Min value of red component of pixels in related window." newline hexmask.long.byte 0x130 8.--15. 1. "diseng_sig0_Gn_Min_S0_Win2,Min value of green component of pixels in related window." newline hexmask.long.byte 0x130 0.--7. 1. "diseng_sig0_Bl_Min_S0_Win2,Min value of blue component of pixels in related window." line.long 0x134 "diseng_sig0_RedSum_Stats0_Win2,Red Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x134 0.--31. 1. "diseng_sig0_Rd_Sum_S0_Win2,Sum of Red Component Values of Pixels in related Window." line.long 0x138 "diseng_sig0_GreenSum_Stats0_Win2,Green Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x138 0.--31. 1. "diseng_sig0_Gn_Sum_S0_Win2,Sum of Green Component Values of Pixels in related Window." line.long 0x13C "diseng_sig0_BlueSum_Stats0_Win2,Blue Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x13C 0.--31. 1. "diseng_sig0_Bl_Sum_S0_Win2,Sum of Blue Component Values of Pixels in related Window." line.long 0x140 "diseng_sig0_LumSum_Stats0_Win2,Luminance Sum Register. Statistics Block 0. Window 2" hexmask.long 0x140 0.--31. 1. "diseng_sig0_Lm_Sum_S0_Win2,Sum of Luminance Values of Pixels in related Window." line.long 0x144 "diseng_sig0_PixCnt_Stats1_Win2,Pixel Counter Register. Statistics Block 1. Window 2" hexmask.long 0x144 0.--27. 1. "diseng_sig0_Px_Cnt_S1_Win2,Pixel counter determines number of valid pixels in related window." line.long 0x148 "diseng_sig0_PixMax_Stats1_Win2,Pixel Max Values Register. Statistics Block 1. Window 2" hexmask.long.byte 0x148 16.--23. 1. "diseng_sig0_Rd_Max_S1_Win2,Max value of red component of pixels in related window." newline hexmask.long.byte 0x148 8.--15. 1. "diseng_sig0_Gn_Max_S1_Win2,Max value of green component of pixels in related window." newline hexmask.long.byte 0x148 0.--7. 1. "diseng_sig0_Bl_Max_S1_Win2,Max value of blue component of pixels in related window." line.long 0x14C "diseng_sig0_PixMin_Stats1_Win2,Pixel Min Values Register. Statistics Block 1. Window 2" hexmask.long.byte 0x14C 16.--23. 1. "diseng_sig0_Rd_Min_S1_Win2,Min value of red component of pixels in related window." newline hexmask.long.byte 0x14C 8.--15. 1. "diseng_sig0_Gn_Min_S1_Win2,Min value of green component of pixels in related window." newline hexmask.long.byte 0x14C 0.--7. 1. "diseng_sig0_Bl_Min_S1_Win2,Min value of blue component of pixels in related window." line.long 0x150 "diseng_sig0_RedSum_Stats1_Win2,Red Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x150 0.--31. 1. "diseng_sig0_Rd_Sum_S1_Win2,Sum of Red Component Values of Pixels in related Window." line.long 0x154 "diseng_sig0_GreenSum_Stats1_Win2,Green Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x154 0.--31. 1. "diseng_sig0_Gn_Sum_S1_Win2,Sum of Green Component Values of Pixels in related Window." line.long 0x158 "diseng_sig0_BlueSum_Stats1_Win2,Blue Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x158 0.--31. 1. "diseng_sig0_Bl_Sum_S1_Win2,Sum of Blue Component Values of Pixels in related Window." line.long 0x15C "diseng_sig0_PixCnt_Stats0_Win3,Pixel Counter Register. Statistics Block 0. Window 3" hexmask.long 0x15C 0.--27. 1. "diseng_sig0_Px_Cnt_S0_Win3,Pixel counter determines number of valid pixels in related window." line.long 0x160 "diseng_sig0_PixMax_Stats0_Win3,Pixel Max Values Register. Statistics Block 0. Window 3" hexmask.long.byte 0x160 16.--23. 1. "diseng_sig0_Rd_Max_S0_Win3,Max value of red component of pixels in related window." newline hexmask.long.byte 0x160 8.--15. 1. "diseng_sig0_Gn_Max_S0_Win3,Max value of green component of pixels in related window." newline hexmask.long.byte 0x160 0.--7. 1. "diseng_sig0_Bl_Max_S0_Win3,Max value of blue component of pixels in related window." line.long 0x164 "diseng_sig0_PixMin_Stats0_Win3,Pixel Min Values Register. Statistics Block 0. Window 3" hexmask.long.byte 0x164 16.--23. 1. "diseng_sig0_Rd_Min_S0_Win3,Min value of red component of pixels in related window." newline hexmask.long.byte 0x164 8.--15. 1. "diseng_sig0_Gn_Min_S0_Win3,Min value of green component of pixels in related window." newline hexmask.long.byte 0x164 0.--7. 1. "diseng_sig0_Bl_Min_S0_Win3,Min value of blue component of pixels in related window." line.long 0x168 "diseng_sig0_RedSum_Stats0_Win3,Red Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x168 0.--31. 1. "diseng_sig0_Rd_Sum_S0_Win3,Sum of Red Component Values of Pixels in related Window." line.long 0x16C "diseng_sig0_GreenSum_Stats0_Win3,Green Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x16C 0.--31. 1. "diseng_sig0_Gn_Sum_S0_Win3,Sum of Green Component Values of Pixels in related Window." line.long 0x170 "diseng_sig0_BlueSum_Stats0_Win3,Blue Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x170 0.--31. 1. "diseng_sig0_Bl_Sum_S0_Win3,Sum of Blue Component Values of Pixels in related Window." line.long 0x174 "diseng_sig0_LumSum_Stats0_Win3,Luminance Sum Register. Statistics Block 0. Window 3" hexmask.long 0x174 0.--31. 1. "diseng_sig0_Lm_Sum_S0_Win3,Sum of Luminance Values of Pixels in related Window." line.long 0x178 "diseng_sig0_PixCnt_Stats1_Win3,Pixel Counter Register. Statistics Block 1. Window 3" hexmask.long 0x178 0.--27. 1. "diseng_sig0_Px_Cnt_S1_Win3,Pixel counter determines number of valid pixels in related window." line.long 0x17C "diseng_sig0_PixMax_Stats1_Win3,Pixel Max Values Register. Statistics Block 1. Window 3" hexmask.long.byte 0x17C 16.--23. 1. "diseng_sig0_Rd_Max_S1_Win3,Max value of red component of pixels in related window." newline hexmask.long.byte 0x17C 8.--15. 1. "diseng_sig0_Gn_Max_S1_Win3,Max value of green component of pixels in related window." newline hexmask.long.byte 0x17C 0.--7. 1. "diseng_sig0_Bl_Max_S1_Win3,Max value of blue component of pixels in related window." line.long 0x180 "diseng_sig0_PixMin_Stats1_Win3,Pixel Min Values Register. Statistics Block 1. Window 3" hexmask.long.byte 0x180 16.--23. 1. "diseng_sig0_Rd_Min_S1_Win3,Min value of red component of pixels in related window." newline hexmask.long.byte 0x180 8.--15. 1. "diseng_sig0_Gn_Min_S1_Win3,Min value of green component of pixels in related window." newline hexmask.long.byte 0x180 0.--7. 1. "diseng_sig0_Bl_Min_S1_Win3,Min value of blue component of pixels in related window." line.long 0x184 "diseng_sig0_RedSum_Stats1_Win3,Red Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x184 0.--31. 1. "diseng_sig0_Rd_Sum_S1_Win3,Sum of Red Component Values of Pixels in related Window." line.long 0x188 "diseng_sig0_GreenSum_Stats1_Win3,Green Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x188 0.--31. 1. "diseng_sig0_Gn_Sum_S1_Win3,Sum of Green Component Values of Pixels in related Window." line.long 0x18C "diseng_sig0_BlueSum_Stats1_Win3,Blue Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x18C 0.--31. 1. "diseng_sig0_Bl_Sum_S1_Win3,Sum of Blue Component Values of Pixels in related Window." wgroup.long 0x2D1000++0x3 line.long 0x0 "diseng_sig0cfg_LockUnlock0,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_sig0cfg_LockUnlock0,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2D1004++0x3 line.long 0x0 "diseng_sig0cfg_LockStatus0,Protection status of this address block." bitfld.long 0x0 8. "diseng_sig0cfg_FreezeStatus0,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_sig0cfg_PrivilegeStatus0,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_sig0cfg_LockStatus0,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2D1008++0x3 line.long 0x0 "diseng_sig0cfg_SrcSelect,Tap selection for sig0." bitfld.long 0x0 0.--1. "diseng_sig0cfg_sig0_select,Selects a source for Sig#0 unit." "0,1,2,3" wgroup.long 0x2E0000++0x3 line.long 0x0 "diseng_sig2_LockUnlock,Register to change the protection status of this address block" hexmask.long 0x0 0.--31. 1. "diseng_sig2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2E0004++0x3 line.long 0x0 "diseng_sig2_LockStatus,Protection status of this address block" bitfld.long 0x0 8. "diseng_sig2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed" "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_sig2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active" "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_sig2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)" "0: inactive,1: active" group.long 0x2E0008++0x17 line.long 0x0 "diseng_sig2_StaticControl,Global configuration" bitfld.long 0x0 4. "diseng_sig2_ShdLdSel,Source select for events that will load shadow registers into the active configuration" "0,1" newline bitfld.long 0x0 0. "diseng_sig2_ShdEn,Enables shadow registers for RWS type fields (0 = write through 1 = shadowed)" "0: write through,1: shadowed)" line.long 0x4 "diseng_sig2_ErrorThreshold,Set and reset thresholds applying to Window_Error and Cluster_Error interrupts and status bits" hexmask.long.byte 0x4 16.--23. 1. "diseng_sig2_ErrThresReset,Number of consecutive 'MATCH' frames before resetting respective Error/Error bit" newline hexmask.long.byte 0x4 0.--7. 1. "diseng_sig2_ErrThres,Number of 'ERROR' frames before generating error interrupt and asserting respective Error/Error status bit" line.long 0x8 "diseng_sig2_MatchThreshold,Set and reset thresholds applying to Match interrupt and status bits" hexmask.long.byte 0x8 16.--23. 1. "diseng_sig2_MatchThresReset,Number of consecutive 'ERROR' frames before resetting respective Match bit" newline hexmask.long.byte 0x8 0.--7. 1. "diseng_sig2_MatchThres,Number of 'MATCH' frames before generating match interrupt and asserting respective Match bit" line.long 0xC "diseng_sig2_PanicColor,Overlay color for evaluation windows in panic mode" hexmask.long.byte 0xC 24.--31. 1. "diseng_sig2_PanicRed,Red color component" newline hexmask.long.byte 0xC 16.--23. 1. "diseng_sig2_PanicGreen,Green color component" newline hexmask.long.byte 0xC 8.--15. 1. "diseng_sig2_PanicBlue,Blue color component" newline hexmask.long.byte 0xC 0.--7. 1. "diseng_sig2_PanicAlpha,Alpha mask bit" line.long 0x10 "diseng_sig2_ShadowLoad,Shadow load control register" hexmask.long.byte 0x10 0.--7. 1. "diseng_sig2_ShdLdReq,Shadow load request for each evaluation window (bit index = window index)" line.long 0x14 "diseng_sig2_ContinuousMode,Signature operation mode control" bitfld.long 0x14 0. "diseng_sig2_EnCont,EnCont = 0: disables continuous mode" "0: disables continuous mode,?" wgroup.long 0x2E0020++0x3 line.long 0x0 "diseng_sig2_SoftwareKick,Signature measurement trigger" bitfld.long 0x0 0. "diseng_sig2_Kick,ContinueMode." "0,1" group.long 0x2E0024++0x3 line.long 0x0 "diseng_sig2_SkipWindow,Enable skipping window feature." bitfld.long 0x0 0. "diseng_sig2_SkipWinEn,If skip window feature is enabled the pixels overlapping multiple windows will be computed for CRC and statistics only in the highest priority window." "0,1" rgroup.long 0x2E0028++0x3 line.long 0x0 "diseng_sig2_Status,Signature evaluation status" hexmask.long.byte 0x0 20.--23. 1. "diseng_sig2_Cluster_Match,Match status bits for all evaluation clusters (bit index = cluster index)" newline hexmask.long.byte 0x0 16.--19. 1. "diseng_sig2_Cluster_Error,Error status bits for all evaluation clusters (bit index = cluster index)" newline hexmask.long.byte 0x0 8.--15. 1. "diseng_sig2_Window_Error,Error status bits for all evaluation windows (bit index = window index)" newline bitfld.long 0x0 1. "diseng_sig2_SigValid,Measured signature values are valid" "0,1" newline bitfld.long 0x0 0. "diseng_sig2_SigState,Run state of the module" "0,1" group.long 0x2E002C++0x1CF line.long 0x0 "diseng_sig2_Control_Window0,Window 0. Control settings" bitfld.long 0x0 24. "diseng_sig2_Sum_Window0,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x0 17. "diseng_sig2_GlobalPanic_Window0,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x0 16. "diseng_sig2_LocalPanic_Window0,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x0 10. "diseng_sig2_AlphaSel_Window0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x0 9. "diseng_sig2_AlphaInv_Window0,When enabled (value 1) the effect of AlphaMask (in enabled mode) is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x0 8. "diseng_sig2_AlphaMask_Window0,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x0 1. "diseng_sig2_CRC_Window0,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x0 0. "diseng_sig2_En_Window0,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x4 "diseng_sig2_UpperLeft_Window0,Window 0. Upper Left Coordinates" hexmask.long.word 0x4 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window0,Y coordinate" newline hexmask.long.word 0x4 0.--13. 1. "diseng_sig2_UpperLeft_X_Window0,X coordinate" line.long 0x8 "diseng_sig2_LowerRight_Window0,Window 0. Lower Right Coordinates" hexmask.long.word 0x8 16.--29. 1. "diseng_sig2_LowerRight_Y_Window0,Y coordinate" newline hexmask.long.word 0x8 0.--13. 1. "diseng_sig2_LowerRight_X_Window0,X coordinate" line.long 0xC "diseng_sig2_Ref_R_Window0,Window 0. Reference CRC Value of Red Channel" hexmask.long 0xC 0.--31. 1. "diseng_sig2_Ref_R_Window0,Reference value that is compared against measured CRC_R value" line.long 0x10 "diseng_sig2_Ref_G_Window0,Window 0. Reference CRC Value of Green Channel" hexmask.long 0x10 0.--31. 1. "diseng_sig2_Ref_G_Window0,Reference value that is compared against measured CRC_G value" line.long 0x14 "diseng_sig2_Ref_B_Window0,Window 0. Reference CRC Value of Blue Channel" hexmask.long 0x14 0.--31. 1. "diseng_sig2_Ref_B_Window0,Reference value that is compared against measured CRC_B value" line.long 0x18 "diseng_sig2_Stats0_Window0,Controls of Statistics Block 0. Window 0" bitfld.long 0x18 2. "diseng_sig2_AlphaSel_S0_Win0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x18 1. "diseng_sig2_AlphaInv_S0_Win0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x18 0. "diseng_sig2_AlphaMask_S0_Win0,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x1C "diseng_sig2_Stats1_Window0,Controls of Statistics Block 0. Window 0" bitfld.long 0x1C 2. "diseng_sig2_AlphaSel_S1_Win0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x1C 1. "diseng_sig2_AlphaInv_S1_Win0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x1C 0. "diseng_sig2_AlphaMask_S1_Win0,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x20 "diseng_sig2_Min_RedSum_Window0,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0x20 0.--31. 1. "diseng_sig2_Min_RSum_Win0,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0x24 "diseng_sig2_Min_GreenSum_Window0,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0x24 0.--31. 1. "diseng_sig2_Min_GSum_Win0,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0x28 "diseng_sig2_Min_BlueSum_Window0,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0x28 0.--31. 1. "diseng_sig2_Min_BSum_Win0,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0x2C "diseng_sig2_Min_LumSum_Window0,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0x2C 0.--31. 1. "diseng_sig2_Min_LSum_Win0,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0x30 "diseng_sig2_Max_RedSum_Window0,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0x30 0.--31. 1. "diseng_sig2_Max_RSum_Win0,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0x34 "diseng_sig2_Max_GreenSum_Window0,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0x34 0.--31. 1. "diseng_sig2_Max_GSum_Win0,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0x38 "diseng_sig2_Max_BlueSum_Window0,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0x38 0.--31. 1. "diseng_sig2_Max_BSum_Win0,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0x3C "diseng_sig2_Max_LumSum_Window0,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0x3C 0.--31. 1. "diseng_sig2_Max_LSum_Win0,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x40 "diseng_sig2_Control_Window1,Window 1. Control settings" bitfld.long 0x40 24. "diseng_sig2_Sum_Window1,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x40 17. "diseng_sig2_GlobalPanic_Window1,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x40 16. "diseng_sig2_LocalPanic_Window1,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x40 10. "diseng_sig2_AlphaSel_Window1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x40 9. "diseng_sig2_AlphaInv_Window1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x40 8. "diseng_sig2_AlphaMask_Window1,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x40 1. "diseng_sig2_CRC_Window1,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x40 0. "diseng_sig2_En_Window1,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x44 "diseng_sig2_UpperLeft_Window1,Window 1. Upper Left Coordinates" hexmask.long.word 0x44 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window1,Y coordinate" newline hexmask.long.word 0x44 0.--13. 1. "diseng_sig2_UpperLeft_X_Window1,X coordinate" line.long 0x48 "diseng_sig2_LowerRight_Window1,Window 1. Lower Right Coordinates" hexmask.long.word 0x48 16.--29. 1. "diseng_sig2_LowerRight_Y_Window1,Y coordinate" newline hexmask.long.word 0x48 0.--13. 1. "diseng_sig2_LowerRight_X_Window1,X coordinate" line.long 0x4C "diseng_sig2_Ref_R_Window1,Window 1. Reference CRC Value of Red Channel" hexmask.long 0x4C 0.--31. 1. "diseng_sig2_Ref_R_Window1,Reference value that is compared against measured CRC_R value" line.long 0x50 "diseng_sig2_Ref_G_Window1,Window 1. Reference CRC Value of Green Channel" hexmask.long 0x50 0.--31. 1. "diseng_sig2_Ref_G_Window1,Reference value that is compared against measured CRC_G value" line.long 0x54 "diseng_sig2_Ref_B_Window1,Window 1. Reference CRC Value of Blue Channel" hexmask.long 0x54 0.--31. 1. "diseng_sig2_Ref_B_Window1,Reference value that is compared against measured CRC_B value" line.long 0x58 "diseng_sig2_Stats0_Window1,Controls of Statistics Block 0. Window 1" bitfld.long 0x58 2. "diseng_sig2_AlphaSel_S0_Win1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x58 1. "diseng_sig2_AlphaInv_S0_Win1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x58 0. "diseng_sig2_AlphaMask_S0_Win1,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x5C "diseng_sig2_Stats1_Window1,Controls of Statistics Block 0. Window 1" bitfld.long 0x5C 2. "diseng_sig2_AlphaSel_S1_Win1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x5C 1. "diseng_sig2_AlphaInv_S1_Win1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x5C 0. "diseng_sig2_AlphaMask_S1_Win1,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x60 "diseng_sig2_Min_RedSum_Window1,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0x60 0.--31. 1. "diseng_sig2_Min_RSum_Win1,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0x64 "diseng_sig2_Min_GreenSum_Window1,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0x64 0.--31. 1. "diseng_sig2_Min_GSum_Win1,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0x68 "diseng_sig2_Min_BlueSum_Window1,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0x68 0.--31. 1. "diseng_sig2_Min_BSum_Win1,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0x6C "diseng_sig2_Min_LumSum_Window1,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0x6C 0.--31. 1. "diseng_sig2_Min_LSum_Win1,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0x70 "diseng_sig2_Max_RedSum_Window1,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0x70 0.--31. 1. "diseng_sig2_Max_RSum_Win1,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0x74 "diseng_sig2_Max_GreenSum_Window1,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0x74 0.--31. 1. "diseng_sig2_Max_GSum_Win1,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0x78 "diseng_sig2_Max_BlueSum_Window1,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0x78 0.--31. 1. "diseng_sig2_Max_BSum_Win1,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0x7C "diseng_sig2_Max_LumSum_Window1,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0x7C 0.--31. 1. "diseng_sig2_Max_LSum_Win1,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x80 "diseng_sig2_Control_Window2,Window 2. Control settings" bitfld.long 0x80 24. "diseng_sig2_Sum_Window2,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x80 17. "diseng_sig2_GlobalPanic_Window2,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x80 16. "diseng_sig2_LocalPanic_Window2,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x80 10. "diseng_sig2_AlphaSel_Window2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x80 9. "diseng_sig2_AlphaInv_Window2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x80 8. "diseng_sig2_AlphaMask_Window2,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x80 1. "diseng_sig2_CRC_Window2,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x80 0. "diseng_sig2_En_Window2,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x84 "diseng_sig2_UpperLeft_Window2,Window 2. Upper Left Coordinates" hexmask.long.word 0x84 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window2,Y coordinate" newline hexmask.long.word 0x84 0.--13. 1. "diseng_sig2_UpperLeft_X_Window2,X coordinate" line.long 0x88 "diseng_sig2_LowerRight_Window2,Window 2. Lower Right Coordinates" hexmask.long.word 0x88 16.--29. 1. "diseng_sig2_LowerRight_Y_Window2,Y coordinate" newline hexmask.long.word 0x88 0.--13. 1. "diseng_sig2_LowerRight_X_Window2,X coordinate" line.long 0x8C "diseng_sig2_Ref_R_Window2,Window 2. Reference CRC Value of Red Channel" hexmask.long 0x8C 0.--31. 1. "diseng_sig2_Ref_R_Window2,Reference value that is compared against measured CRC_R value" line.long 0x90 "diseng_sig2_Ref_G_Window2,Window 2. Reference CRC Value of Green Channel" hexmask.long 0x90 0.--31. 1. "diseng_sig2_Ref_G_Window2,Reference value that is compared against measured CRC_G value" line.long 0x94 "diseng_sig2_Ref_B_Window2,Window 2. Reference CRC Value of Blue Channel" hexmask.long 0x94 0.--31. 1. "diseng_sig2_Ref_B_Window2,Reference value that is compared against measured CRC_B value" line.long 0x98 "diseng_sig2_Stats0_Window2,Controls of Statistics Block 0. Window 2" bitfld.long 0x98 2. "diseng_sig2_AlphaSel_S0_Win2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x98 1. "diseng_sig2_AlphaInv_S0_Win2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x98 0. "diseng_sig2_AlphaMask_S0_Win2,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x9C "diseng_sig2_Stats1_Window2,Controls of Statistics Block 0. Window 2" bitfld.long 0x9C 2. "diseng_sig2_AlphaSel_S1_Win2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x9C 1. "diseng_sig2_AlphaInv_S1_Win2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x9C 0. "diseng_sig2_AlphaMask_S1_Win2,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xA0 "diseng_sig2_Min_RedSum_Window2,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0xA0 0.--31. 1. "diseng_sig2_Min_RSum_Win2,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0xA4 "diseng_sig2_Min_GreenSum_Window2,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0xA4 0.--31. 1. "diseng_sig2_Min_GSum_Win2,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0xA8 "diseng_sig2_Min_BlueSum_Window2,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0xA8 0.--31. 1. "diseng_sig2_Min_BSum_Win2,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0xAC "diseng_sig2_Min_LumSum_Window2,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0xAC 0.--31. 1. "diseng_sig2_Min_LSum_Win2,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0xB0 "diseng_sig2_Max_RedSum_Window2,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0xB0 0.--31. 1. "diseng_sig2_Max_RSum_Win2,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0xB4 "diseng_sig2_Max_GreenSum_Window2,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0xB4 0.--31. 1. "diseng_sig2_Max_GSum_Win2,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0xB8 "diseng_sig2_Max_BlueSum_Window2,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0xB8 0.--31. 1. "diseng_sig2_Max_BSum_Win2,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0xBC "diseng_sig2_Max_LumSum_Window2,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0xBC 0.--31. 1. "diseng_sig2_Max_LSum_Win2,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0xC0 "diseng_sig2_Control_Window3,Window 3. Control settings" bitfld.long 0xC0 24. "diseng_sig2_Sum_Window3,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0xC0 17. "diseng_sig2_GlobalPanic_Window3,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0xC0 16. "diseng_sig2_LocalPanic_Window3,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0xC0 10. "diseng_sig2_AlphaSel_Window3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xC0 9. "diseng_sig2_AlphaInv_Window3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xC0 8. "diseng_sig2_AlphaMask_Window3,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0xC0 1. "diseng_sig2_CRC_Window3,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0xC0 0. "diseng_sig2_En_Window3,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0xC4 "diseng_sig2_UpperLeft_Window3,Window 3. Upper Left Coordinates" hexmask.long.word 0xC4 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window3,Y coordinate" newline hexmask.long.word 0xC4 0.--13. 1. "diseng_sig2_UpperLeft_X_Window3,X coordinate" line.long 0xC8 "diseng_sig2_LowerRight_Window3,Window 3. Lower Right Coordinates" hexmask.long.word 0xC8 16.--29. 1. "diseng_sig2_LowerRight_Y_Window3,Y coordinate" newline hexmask.long.word 0xC8 0.--13. 1. "diseng_sig2_LowerRight_X_Window3,X coordinate" line.long 0xCC "diseng_sig2_Ref_R_Window3,Window 3. Reference CRC Value of Red Channel" hexmask.long 0xCC 0.--31. 1. "diseng_sig2_Ref_R_Window3,Reference value that is compared against measured CRC_R value" line.long 0xD0 "diseng_sig2_Ref_G_Window3,Window 3. Reference CRC Value of Green Channel" hexmask.long 0xD0 0.--31. 1. "diseng_sig2_Ref_G_Window3,Reference value that is compared against measured CRC_G value" line.long 0xD4 "diseng_sig2_Ref_B_Window3,Window 3. Reference CRC Value of Blue Channel" hexmask.long 0xD4 0.--31. 1. "diseng_sig2_Ref_B_Window3,Reference value that is compared against measured CRC_B value" line.long 0xD8 "diseng_sig2_Stats0_Window3,Controls of Statistics Block 0. Window 3" bitfld.long 0xD8 2. "diseng_sig2_AlphaSel_S0_Win3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xD8 1. "diseng_sig2_AlphaInv_S0_Win3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xD8 0. "diseng_sig2_AlphaMask_S0_Win3,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xDC "diseng_sig2_Stats1_Window3,Controls of Statistics Block 0. Window 3" bitfld.long 0xDC 2. "diseng_sig2_AlphaSel_S1_Win3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xDC 1. "diseng_sig2_AlphaInv_S1_Win3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xDC 0. "diseng_sig2_AlphaMask_S1_Win3,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xE0 "diseng_sig2_Min_RedSum_Window3,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0xE0 0.--31. 1. "diseng_sig2_Min_RSum_Win3,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0xE4 "diseng_sig2_Min_GreenSum_Window3,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0xE4 0.--31. 1. "diseng_sig2_Min_GSum_Win3,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0xE8 "diseng_sig2_Min_BlueSum_Window3,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0xE8 0.--31. 1. "diseng_sig2_Min_BSum_Win3,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0xEC "diseng_sig2_Min_LumSum_Window3,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0xEC 0.--31. 1. "diseng_sig2_Min_LSum_Win3,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0xF0 "diseng_sig2_Max_RedSum_Window3,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0xF0 0.--31. 1. "diseng_sig2_Max_RSum_Win3,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0xF4 "diseng_sig2_Max_GreenSum_Window3,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0xF4 0.--31. 1. "diseng_sig2_Max_GSum_Win3,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0xF8 "diseng_sig2_Max_BlueSum_Window3,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0xF8 0.--31. 1. "diseng_sig2_Max_BSum_Win3,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0xFC "diseng_sig2_Max_LumSum_Window3,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0xFC 0.--31. 1. "diseng_sig2_Max_LSum_Win3,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x100 "diseng_sig2_Control_Window4,Window 4. Control settings" bitfld.long 0x100 17. "diseng_sig2_GlobalPanic_Window4,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x100 16. "diseng_sig2_LocalPanic_Window4,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x100 10. "diseng_sig2_AlphaSel_Window4,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x100 9. "diseng_sig2_AlphaInv_Window4,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x100 8. "diseng_sig2_AlphaMask_Window4,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x100 1. "diseng_sig2_CRC_Window4,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x100 0. "diseng_sig2_En_Window4,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x104 "diseng_sig2_UpperLeft_Window4,Window 4. Upper Left Coordinates" hexmask.long.word 0x104 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window4,Y coordinate" newline hexmask.long.word 0x104 0.--13. 1. "diseng_sig2_UpperLeft_X_Window4,X coordinate" line.long 0x108 "diseng_sig2_LowerRight_Window4,Window 4. Lower Right Coordinates" hexmask.long.word 0x108 16.--29. 1. "diseng_sig2_LowerRight_Y_Window4,Y coordinate" newline hexmask.long.word 0x108 0.--13. 1. "diseng_sig2_LowerRight_X_Window4,X coordinate" line.long 0x10C "diseng_sig2_Ref_R_Window4,Window 4. Reference CRC Value of Red Channel" hexmask.long 0x10C 0.--31. 1. "diseng_sig2_Ref_R_Window4,Reference value that is compared against measured CRC_R value" line.long 0x110 "diseng_sig2_Ref_G_Window4,Window 4. Reference CRC Value of Green Channel" hexmask.long 0x110 0.--31. 1. "diseng_sig2_Ref_G_Window4,Reference value that is compared against measured CRC_G value" line.long 0x114 "diseng_sig2_Ref_B_Window4,Window 4. Reference CRC Value of Blue Channel" hexmask.long 0x114 0.--31. 1. "diseng_sig2_Ref_B_Window4,Reference value that is compared against measured CRC_B value" line.long 0x118 "diseng_sig2_Control_Window5,Window 5. Control settings" bitfld.long 0x118 17. "diseng_sig2_GlobalPanic_Window5,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x118 16. "diseng_sig2_LocalPanic_Window5,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x118 10. "diseng_sig2_AlphaSel_Window5,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x118 9. "diseng_sig2_AlphaInv_Window5,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x118 8. "diseng_sig2_AlphaMask_Window5,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x118 1. "diseng_sig2_CRC_Window5,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x118 0. "diseng_sig2_En_Window5,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x11C "diseng_sig2_UpperLeft_Window5,Window 5. Upper Left Coordinates" hexmask.long.word 0x11C 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window5,Y coordinate" newline hexmask.long.word 0x11C 0.--13. 1. "diseng_sig2_UpperLeft_X_Window5,X coordinate" line.long 0x120 "diseng_sig2_LowerRight_Window5,Window 5. Lower Right Coordinates" hexmask.long.word 0x120 16.--29. 1. "diseng_sig2_LowerRight_Y_Window5,Y coordinate" newline hexmask.long.word 0x120 0.--13. 1. "diseng_sig2_LowerRight_X_Window5,X coordinate" line.long 0x124 "diseng_sig2_Ref_R_Window5,Window 5. Reference CRC Value of Red Channel" hexmask.long 0x124 0.--31. 1. "diseng_sig2_Ref_R_Window5,Reference value that is compared against measured CRC_R value" line.long 0x128 "diseng_sig2_Ref_G_Window5,Window 5. Reference CRC Value of Green Channel" hexmask.long 0x128 0.--31. 1. "diseng_sig2_Ref_G_Window5,Reference value that is compared against measured CRC_G value" line.long 0x12C "diseng_sig2_Ref_B_Window5,Window 5. Reference CRC Value of Blue Channel" hexmask.long 0x12C 0.--31. 1. "diseng_sig2_Ref_B_Window5,Reference value that is compared against measured CRC_B value" line.long 0x130 "diseng_sig2_Control_Window6,Window 6. Control settings" bitfld.long 0x130 17. "diseng_sig2_GlobalPanic_Window6,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x130 16. "diseng_sig2_LocalPanic_Window6,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x130 10. "diseng_sig2_AlphaSel_Window6,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x130 9. "diseng_sig2_AlphaInv_Window6,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x130 8. "diseng_sig2_AlphaMask_Window6,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x130 1. "diseng_sig2_CRC_Window6,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x130 0. "diseng_sig2_En_Window6,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x134 "diseng_sig2_UpperLeft_Window6,Window 6. Upper Left Coordinates" hexmask.long.word 0x134 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window6,Y coordinate" newline hexmask.long.word 0x134 0.--13. 1. "diseng_sig2_UpperLeft_X_Window6,X coordinate" line.long 0x138 "diseng_sig2_LowerRight_Window6,Window 6. Lower Right Coordinates" hexmask.long.word 0x138 16.--29. 1. "diseng_sig2_LowerRight_Y_Window6,Y coordinate" newline hexmask.long.word 0x138 0.--13. 1. "diseng_sig2_LowerRight_X_Window6,X coordinate" line.long 0x13C "diseng_sig2_Ref_R_Window6,Window 6. Reference CRC Value of Red Channel" hexmask.long 0x13C 0.--31. 1. "diseng_sig2_Ref_R_Window6,Reference value that is compared against measured CRC_R value" line.long 0x140 "diseng_sig2_Ref_G_Window6,Window 6. Reference CRC Value of Green Channel" hexmask.long 0x140 0.--31. 1. "diseng_sig2_Ref_G_Window6,Reference value that is compared against measured CRC_G value" line.long 0x144 "diseng_sig2_Ref_B_Window6,Window 6. Reference CRC Value of Blue Channel" hexmask.long 0x144 0.--31. 1. "diseng_sig2_Ref_B_Window6,Reference value that is compared against measured CRC_B value" line.long 0x148 "diseng_sig2_Control_Window7,Window 7. Control settings" bitfld.long 0x148 17. "diseng_sig2_GlobalPanic_Window7,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x148 16. "diseng_sig2_LocalPanic_Window7,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x148 10. "diseng_sig2_AlphaSel_Window7,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x148 9. "diseng_sig2_AlphaInv_Window7,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x148 8. "diseng_sig2_AlphaMask_Window7,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x148 1. "diseng_sig2_CRC_Window7,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x148 0. "diseng_sig2_En_Window7,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x14C "diseng_sig2_UpperLeft_Window7,Window 7. Upper Left Coordinates" hexmask.long.word 0x14C 16.--29. 1. "diseng_sig2_UpperLeft_Y_Window7,Y coordinate" newline hexmask.long.word 0x14C 0.--13. 1. "diseng_sig2_UpperLeft_X_Window7,X coordinate" line.long 0x150 "diseng_sig2_LowerRight_Window7,Window 7. Lower Right Coordinates" hexmask.long.word 0x150 16.--29. 1. "diseng_sig2_LowerRight_Y_Window7,Y coordinate" newline hexmask.long.word 0x150 0.--13. 1. "diseng_sig2_LowerRight_X_Window7,X coordinate" line.long 0x154 "diseng_sig2_Ref_R_Window7,Window 7. Reference CRC Value of Red Channel" hexmask.long 0x154 0.--31. 1. "diseng_sig2_Ref_R_Window7,Reference value that is compared against measured CRC_R value" line.long 0x158 "diseng_sig2_Ref_G_Window7,Window 7. Reference CRC Value of Green Channel" hexmask.long 0x158 0.--31. 1. "diseng_sig2_Ref_G_Window7,Reference value that is compared against measured CRC_G value" line.long 0x15C "diseng_sig2_Ref_B_Window7,Window 7. Reference CRC Value of Blue Channel" hexmask.long 0x15C 0.--31. 1. "diseng_sig2_Ref_B_Window7,Reference value that is compared against measured CRC_B value" line.long 0x160 "diseng_sig2_Control_Cluster0,Cluster 0. Control settings" hexmask.long.byte 0x160 24.--31. 1. "diseng_sig2_MaskRed_Cluster0,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x160 16.--23. 1. "diseng_sig2_MaskGreen_Cluster0,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x160 8.--15. 1. "diseng_sig2_MaskBlue_Cluster0,Bit mask applied to blue channel before sampling" newline bitfld.long 0x160 7. "diseng_sig2_Pix3_En_Cluster0,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x160 6. "diseng_sig2_Pix2_En_Cluster0,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x160 5. "diseng_sig2_Pix1_En_Cluster0,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x160 4. "diseng_sig2_Pix0_En_Cluster0,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x160 0. "diseng_sig2_En_Cluster0,Cluster 0 enable" "0,1" line.long 0x164 "diseng_sig2_Pix0_Cluster0,Cluster 0. Coordinate of Pixel 0" hexmask.long.word 0x164 16.--29. 1. "diseng_sig2_Y0_Cluster0,Vertical coordinate of pixel 0" newline hexmask.long.word 0x164 0.--13. 1. "diseng_sig2_X0_Cluster0,Horizontal coordinate of pixel 0" line.long 0x168 "diseng_sig2_Pix1_Cluster0,Cluster 0. Coordinate of Pixel 1" hexmask.long.word 0x168 16.--29. 1. "diseng_sig2_Y1_Cluster0,Vertical coordinate of pixel 1" newline hexmask.long.word 0x168 0.--13. 1. "diseng_sig2_X1_Cluster0,Horizontal coordinate of pixel 1" line.long 0x16C "diseng_sig2_Pix2_Cluster0,Cluster 0. Coordinate of Pixel 2" hexmask.long.word 0x16C 16.--29. 1. "diseng_sig2_Y2_Cluster0,Vertical coordinate of pixel 2" newline hexmask.long.word 0x16C 0.--13. 1. "diseng_sig2_X2_Cluster0,Horizontal coordinate of pixel 2" line.long 0x170 "diseng_sig2_Pix3_Cluster0,Cluster 0. Coordinate of Pixel 3" hexmask.long.word 0x170 16.--29. 1. "diseng_sig2_Y3_Cluster0,Vertical coordinate of pixel 3" newline hexmask.long.word 0x170 0.--13. 1. "diseng_sig2_X3_Cluster0,Horizontal coordinate of pixel 3" line.long 0x174 "diseng_sig2_Ref0_Cluster0,Cluster 0. Reference Vector 0" hexmask.long.tbyte 0x174 0.--23. 1. "diseng_sig2_Ref0_Cluster0,Reference value." line.long 0x178 "diseng_sig2_Ref1_Cluster0,Cluster 0. Reference Vector 1" hexmask.long.tbyte 0x178 0.--23. 1. "diseng_sig2_Ref1_Cluster0,Reference value." line.long 0x17C "diseng_sig2_Control_Cluster1,Cluster 1. Control settings" hexmask.long.byte 0x17C 24.--31. 1. "diseng_sig2_MaskRed_Cluster1,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x17C 16.--23. 1. "diseng_sig2_MaskGreen_Cluster1,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x17C 8.--15. 1. "diseng_sig2_MaskBlue_Cluster1,Bit mask applied to blue channel before sampling" newline bitfld.long 0x17C 7. "diseng_sig2_Pix3_En_Cluster1,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x17C 6. "diseng_sig2_Pix2_En_Cluster1,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x17C 5. "diseng_sig2_Pix1_En_Cluster1,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x17C 4. "diseng_sig2_Pix0_En_Cluster1,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x17C 0. "diseng_sig2_En_Cluster1,Cluster 1 enable" "0,1" line.long 0x180 "diseng_sig2_Pix0_Cluster1,Cluster 1. Coordinate of Pixel 0" hexmask.long.word 0x180 16.--29. 1. "diseng_sig2_Y0_Cluster1,Vertical coordinate of pixel 0" newline hexmask.long.word 0x180 0.--13. 1. "diseng_sig2_X0_Cluster1,Horizontal coordinate of pixel 0" line.long 0x184 "diseng_sig2_Pix1_Cluster1,Cluster 1. Coordinate of Pixel 1" hexmask.long.word 0x184 16.--29. 1. "diseng_sig2_Y1_Cluster1,Vertical coordinate of pixel 1" newline hexmask.long.word 0x184 0.--13. 1. "diseng_sig2_X1_Cluster1,Horizontal coordinate of pixel 1" line.long 0x188 "diseng_sig2_Pix2_Cluster1,Cluster 1. Coordinate of Pixel 2" hexmask.long.word 0x188 16.--29. 1. "diseng_sig2_Y2_Cluster1,Vertical coordinate of pixel 2" newline hexmask.long.word 0x188 0.--13. 1. "diseng_sig2_X2_Cluster1,Horizontal coordinate of pixel 2" line.long 0x18C "diseng_sig2_Pix3_Cluster1,Cluster 1. Coordinate of Pixel 3" hexmask.long.word 0x18C 16.--29. 1. "diseng_sig2_Y3_Cluster1,Vertical coordinate of pixel 3" newline hexmask.long.word 0x18C 0.--13. 1. "diseng_sig2_X3_Cluster1,Horizontal coordinate of pixel 3" line.long 0x190 "diseng_sig2_Ref0_Cluster1,Cluster 1. Reference Vector 0" hexmask.long.tbyte 0x190 0.--23. 1. "diseng_sig2_Ref0_Cluster1,Reference value." line.long 0x194 "diseng_sig2_Ref1_Cluster1,Cluster 1. Reference Vector 1" hexmask.long.tbyte 0x194 0.--23. 1. "diseng_sig2_Ref1_Cluster1,Reference value." line.long 0x198 "diseng_sig2_Control_Cluster2,Cluster 2. Control settings" hexmask.long.byte 0x198 24.--31. 1. "diseng_sig2_MaskRed_Cluster2,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x198 16.--23. 1. "diseng_sig2_MaskGreen_Cluster2,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x198 8.--15. 1. "diseng_sig2_MaskBlue_Cluster2,Bit mask applied to blue channel before sampling" newline bitfld.long 0x198 7. "diseng_sig2_Pix3_En_Cluster2,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x198 6. "diseng_sig2_Pix2_En_Cluster2,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x198 5. "diseng_sig2_Pix1_En_Cluster2,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x198 4. "diseng_sig2_Pix0_En_Cluster2,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x198 0. "diseng_sig2_En_Cluster2,Cluster 2 enable" "0,1" line.long 0x19C "diseng_sig2_Pix0_Cluster2,Cluster 2. Coordinate of Pixel 0" hexmask.long.word 0x19C 16.--29. 1. "diseng_sig2_Y0_Cluster2,Vertical coordinate of pixel 0" newline hexmask.long.word 0x19C 0.--13. 1. "diseng_sig2_X0_Cluster2,Horizontal coordinate of pixel 0" line.long 0x1A0 "diseng_sig2_Pix1_Cluster2,Cluster 2. Coordinate of Pixel 1" hexmask.long.word 0x1A0 16.--29. 1. "diseng_sig2_Y1_Cluster2,Vertical coordinate of pixel 1" newline hexmask.long.word 0x1A0 0.--13. 1. "diseng_sig2_X1_Cluster2,Horizontal coordinate of pixel 1" line.long 0x1A4 "diseng_sig2_Pix2_Cluster2,Cluster 2. Coordinate of Pixel 2" hexmask.long.word 0x1A4 16.--29. 1. "diseng_sig2_Y2_Cluster2,Vertical coordinate of pixel 2" newline hexmask.long.word 0x1A4 0.--13. 1. "diseng_sig2_X2_Cluster2,Horizontal coordinate of pixel 2" line.long 0x1A8 "diseng_sig2_Pix3_Cluster2,Cluster 2. Coordinate of Pixel 3" hexmask.long.word 0x1A8 16.--29. 1. "diseng_sig2_Y3_Cluster2,Vertical coordinate of pixel 3" newline hexmask.long.word 0x1A8 0.--13. 1. "diseng_sig2_X3_Cluster2,Horizontal coordinate of pixel 3" line.long 0x1AC "diseng_sig2_Ref0_Cluster2,Cluster 2. Reference Vector 0" hexmask.long.tbyte 0x1AC 0.--23. 1. "diseng_sig2_Ref0_Cluster2,Reference value." line.long 0x1B0 "diseng_sig2_Ref1_Cluster2,Cluster 2. Reference Vector 1" hexmask.long.tbyte 0x1B0 0.--23. 1. "diseng_sig2_Ref1_Cluster2,Reference value." line.long 0x1B4 "diseng_sig2_Control_Cluster3,Cluster 3. Control settings" hexmask.long.byte 0x1B4 24.--31. 1. "diseng_sig2_MaskRed_Cluster3,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x1B4 16.--23. 1. "diseng_sig2_MaskGreen_Cluster3,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x1B4 8.--15. 1. "diseng_sig2_MaskBlue_Cluster3,Bit mask applied to blue channel before sampling" newline bitfld.long 0x1B4 7. "diseng_sig2_Pix3_En_Cluster3,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x1B4 6. "diseng_sig2_Pix2_En_Cluster3,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x1B4 5. "diseng_sig2_Pix1_En_Cluster3,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x1B4 4. "diseng_sig2_Pix0_En_Cluster3,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x1B4 0. "diseng_sig2_En_Cluster3,Cluster 3 enable" "0,1" line.long 0x1B8 "diseng_sig2_Pix0_Cluster3,Cluster 3. Coordinate of Pixel 0" hexmask.long.word 0x1B8 16.--29. 1. "diseng_sig2_Y0_Cluster3,Vertical coordinate of pixel 0" newline hexmask.long.word 0x1B8 0.--13. 1. "diseng_sig2_X0_Cluster3,Horizontal coordinate of pixel 0" line.long 0x1BC "diseng_sig2_Pix1_Cluster3,Cluster 3. Coordinate of Pixel 1" hexmask.long.word 0x1BC 16.--29. 1. "diseng_sig2_Y1_Cluster3,Vertical coordinate of pixel 1" newline hexmask.long.word 0x1BC 0.--13. 1. "diseng_sig2_X1_Cluster3,Horizontal coordinate of pixel 1" line.long 0x1C0 "diseng_sig2_Pix2_Cluster3,Cluster 3. Coordinate of Pixel 2" hexmask.long.word 0x1C0 16.--29. 1. "diseng_sig2_Y2_Cluster3,Vertical coordinate of pixel 2" newline hexmask.long.word 0x1C0 0.--13. 1. "diseng_sig2_X2_Cluster3,Horizontal coordinate of pixel 2" line.long 0x1C4 "diseng_sig2_Pix3_Cluster3,Cluster 3. Coordinate of Pixel 3" hexmask.long.word 0x1C4 16.--29. 1. "diseng_sig2_Y3_Cluster3,Vertical coordinate of pixel 3" newline hexmask.long.word 0x1C4 0.--13. 1. "diseng_sig2_X3_Cluster3,Horizontal coordinate of pixel 3" line.long 0x1C8 "diseng_sig2_Ref0_Cluster3,Cluster 3. Reference Vector 0" hexmask.long.tbyte 0x1C8 0.--23. 1. "diseng_sig2_Ref0_Cluster3,Reference value." line.long 0x1CC "diseng_sig2_Ref1_Cluster3,Cluster 3. Reference Vector 1" hexmask.long.tbyte 0x1CC 0.--23. 1. "diseng_sig2_Ref1_Cluster3,Reference value." rgroup.long 0x2E0400++0x18F line.long 0x0 "diseng_sig2_CRC_R_Window0,Window 0. Measured CRC Value of Red Channel" hexmask.long 0x0 0.--31. 1. "diseng_sig2_CRC_R_Window0,CRC value from red channel" line.long 0x4 "diseng_sig2_CRC_G_Window0,Window 0. Measured CRC Value of Green Channel" hexmask.long 0x4 0.--31. 1. "diseng_sig2_CRC_G_Window0,CRC value from green channel" line.long 0x8 "diseng_sig2_CRC_B_Window0,Window 0. Measured CRC Value of Blue Channel" hexmask.long 0x8 0.--31. 1. "diseng_sig2_CRC_B_Window0,CRC value from blue channel" line.long 0xC "diseng_sig2_CRC_R_Window1,Window 1. Measured CRC Value of Red Channel" hexmask.long 0xC 0.--31. 1. "diseng_sig2_CRC_R_Window1,CRC value from red channel" line.long 0x10 "diseng_sig2_CRC_G_Window1,Window 1. Measured CRC Value of Green Channel" hexmask.long 0x10 0.--31. 1. "diseng_sig2_CRC_G_Window1,CRC value from green channel" line.long 0x14 "diseng_sig2_CRC_B_Window1,Window 1. Measured CRC Value of Blue Channel" hexmask.long 0x14 0.--31. 1. "diseng_sig2_CRC_B_Window1,CRC value from blue channel" line.long 0x18 "diseng_sig2_CRC_R_Window2,Window 2. Measured CRC Value of Red Channel" hexmask.long 0x18 0.--31. 1. "diseng_sig2_CRC_R_Window2,CRC value from red channel" line.long 0x1C "diseng_sig2_CRC_G_Window2,Window 2. Measured CRC Value of Green Channel" hexmask.long 0x1C 0.--31. 1. "diseng_sig2_CRC_G_Window2,CRC value from green channel" line.long 0x20 "diseng_sig2_CRC_B_Window2,Window 2. Measured CRC Value of Blue Channel" hexmask.long 0x20 0.--31. 1. "diseng_sig2_CRC_B_Window2,CRC value from blue channel" line.long 0x24 "diseng_sig2_CRC_R_Window3,Window 3. Measured CRC Value of Red Channel" hexmask.long 0x24 0.--31. 1. "diseng_sig2_CRC_R_Window3,CRC value from red channel" line.long 0x28 "diseng_sig2_CRC_G_Window3,Window 3. Measured CRC Value of Green Channel" hexmask.long 0x28 0.--31. 1. "diseng_sig2_CRC_G_Window3,CRC value from green channel" line.long 0x2C "diseng_sig2_CRC_B_Window3,Window 3. Measured CRC Value of Blue Channel" hexmask.long 0x2C 0.--31. 1. "diseng_sig2_CRC_B_Window3,CRC value from blue channel" line.long 0x30 "diseng_sig2_CRC_R_Window4,Window 4. Measured CRC Value of Red Channel" hexmask.long 0x30 0.--31. 1. "diseng_sig2_CRC_R_Window4,CRC value from red channel" line.long 0x34 "diseng_sig2_CRC_G_Window4,Window 4. Measured CRC Value of Green Channel" hexmask.long 0x34 0.--31. 1. "diseng_sig2_CRC_G_Window4,CRC value from green channel" line.long 0x38 "diseng_sig2_CRC_B_Window4,Window 4. Measured CRC Value of Blue Channel" hexmask.long 0x38 0.--31. 1. "diseng_sig2_CRC_B_Window4,CRC value from blue channel" line.long 0x3C "diseng_sig2_CRC_R_Window5,Window 5. Measured CRC Value of Red Channel" hexmask.long 0x3C 0.--31. 1. "diseng_sig2_CRC_R_Window5,CRC value from red channel" line.long 0x40 "diseng_sig2_CRC_G_Window5,Window 5. Measured CRC Value of Green Channel" hexmask.long 0x40 0.--31. 1. "diseng_sig2_CRC_G_Window5,CRC value from green channel" line.long 0x44 "diseng_sig2_CRC_B_Window5,Window 5. Measured CRC Value of Blue Channel" hexmask.long 0x44 0.--31. 1. "diseng_sig2_CRC_B_Window5,CRC value from blue channel" line.long 0x48 "diseng_sig2_CRC_R_Window6,Window 6. Measured CRC Value of Red Channel" hexmask.long 0x48 0.--31. 1. "diseng_sig2_CRC_R_Window6,CRC value from red channel" line.long 0x4C "diseng_sig2_CRC_G_Window6,Window 6. Measured CRC Value of Green Channel" hexmask.long 0x4C 0.--31. 1. "diseng_sig2_CRC_G_Window6,CRC value from green channel" line.long 0x50 "diseng_sig2_CRC_B_Window6,Window 6. Measured CRC Value of Blue Channel" hexmask.long 0x50 0.--31. 1. "diseng_sig2_CRC_B_Window6,CRC value from blue channel" line.long 0x54 "diseng_sig2_CRC_R_Window7,Window 7. Measured CRC Value of Red Channel" hexmask.long 0x54 0.--31. 1. "diseng_sig2_CRC_R_Window7,CRC value from red channel" line.long 0x58 "diseng_sig2_CRC_G_Window7,Window 7. Measured CRC Value of Green Channel" hexmask.long 0x58 0.--31. 1. "diseng_sig2_CRC_G_Window7,CRC value from green channel" line.long 0x5C "diseng_sig2_CRC_B_Window7,Window 7. Measured CRC Value of Blue Channel" hexmask.long 0x5C 0.--31. 1. "diseng_sig2_CRC_B_Window7,CRC value from blue channel" line.long 0x60 "diseng_sig2_Status_Cluster0,Cluster 0. Status" bitfld.long 0x60 7. "diseng_sig2_Sts31_Cluster0,Evaluation of Vector3_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 6. "diseng_sig2_Sts30_Cluster0,Evaluation of Vector3_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 5. "diseng_sig2_Sts21_Cluster0,Evaluation of Vector2_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 4. "diseng_sig2_Sts20_Cluster0,Evaluation of Vector2_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 3. "diseng_sig2_Sts11_Cluster0,Evaluation of Vector1_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 2. "diseng_sig2_Sts10_Cluster0,Evaluation of Vector1_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 1. "diseng_sig2_Sts01_Cluster0,Evaluation of Vector0_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 0. "diseng_sig2_Sts00_Cluster0,Evaluation of Vector0_Cluster0 against reference Ref0_Cluster0" "0,1" line.long 0x64 "diseng_sig2_Counter_Cluster0,Cluster 0. Match and Error Counters" hexmask.long.byte 0x64 16.--23. 1. "diseng_sig2_ErrorCount_Cluster0,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x64 0.--7. 1. "diseng_sig2_MatchCount_Cluster0,Number of evaluations where at least one match occurred" line.long 0x68 "diseng_sig2_Vector0_Cluster0,Cluster 0. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x68 22.--23. "diseng_sig2_Pix3_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 20.--21. "diseng_sig2_Pix3_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 18.--19. "diseng_sig2_Pix3_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 16.--17. "diseng_sig2_Pix2_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 14.--15. "diseng_sig2_Pix2_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 12.--13. "diseng_sig2_Pix2_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 10.--11. "diseng_sig2_Pix1_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 8.--9. "diseng_sig2_Pix1_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 6.--7. "diseng_sig2_Pix1_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 4.--5. "diseng_sig2_Pix0_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x68 2.--3. "diseng_sig2_Pix0_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x68 0.--1. "diseng_sig2_Pix0_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x6C "diseng_sig2_Vector1_Cluster0,Cluster 0. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x6C 22.--23. "diseng_sig2_Pix3_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 20.--21. "diseng_sig2_Pix3_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 18.--19. "diseng_sig2_Pix3_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 16.--17. "diseng_sig2_Pix2_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 14.--15. "diseng_sig2_Pix2_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 12.--13. "diseng_sig2_Pix2_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 10.--11. "diseng_sig2_Pix1_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 8.--9. "diseng_sig2_Pix1_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 6.--7. "diseng_sig2_Pix1_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 4.--5. "diseng_sig2_Pix0_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x6C 2.--3. "diseng_sig2_Pix0_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x6C 0.--1. "diseng_sig2_Pix0_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x70 "diseng_sig2_Vector2_Cluster0,Cluster 0. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0x70 22.--23. "diseng_sig2_Pix3_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 20.--21. "diseng_sig2_Pix3_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 18.--19. "diseng_sig2_Pix3_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 16.--17. "diseng_sig2_Pix2_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 14.--15. "diseng_sig2_Pix2_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 12.--13. "diseng_sig2_Pix2_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 10.--11. "diseng_sig2_Pix1_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 8.--9. "diseng_sig2_Pix1_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 6.--7. "diseng_sig2_Pix1_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 4.--5. "diseng_sig2_Pix0_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x70 2.--3. "diseng_sig2_Pix0_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x70 0.--1. "diseng_sig2_Pix0_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x74 "diseng_sig2_Vector3_Cluster0,Cluster 0. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0x74 22.--23. "diseng_sig2_Pix3_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 20.--21. "diseng_sig2_Pix3_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 18.--19. "diseng_sig2_Pix3_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 16.--17. "diseng_sig2_Pix2_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 14.--15. "diseng_sig2_Pix2_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 12.--13. "diseng_sig2_Pix2_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 10.--11. "diseng_sig2_Pix1_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 8.--9. "diseng_sig2_Pix1_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 6.--7. "diseng_sig2_Pix1_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 4.--5. "diseng_sig2_Pix0_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x74 2.--3. "diseng_sig2_Pix0_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x74 0.--1. "diseng_sig2_Pix0_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x78 "diseng_sig2_Status_Cluster1,Cluster 1. Status" bitfld.long 0x78 7. "diseng_sig2_Sts31_Cluster1,Evaluation of Vector3_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 6. "diseng_sig2_Sts30_Cluster1,Evaluation of Vector3_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 5. "diseng_sig2_Sts21_Cluster1,Evaluation of Vector2_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 4. "diseng_sig2_Sts20_Cluster1,Evaluation of Vector2_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 3. "diseng_sig2_Sts11_Cluster1,Evaluation of Vector1_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 2. "diseng_sig2_Sts10_Cluster1,Evaluation of Vector1_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 1. "diseng_sig2_Sts01_Cluster1,Evaluation of Vector0_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 0. "diseng_sig2_Sts00_Cluster1,Evaluation of Vector0_Cluster1 against reference Ref0_Cluster1" "0,1" line.long 0x7C "diseng_sig2_Counter_Cluster1,Cluster 1. Match and Error Counters" hexmask.long.byte 0x7C 16.--23. 1. "diseng_sig2_ErrorCount_Cluster1,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x7C 0.--7. 1. "diseng_sig2_MatchCount_Cluster1,Number of evaluations where at least one match occurred" line.long 0x80 "diseng_sig2_Vector0_Cluster1,Cluster 1. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x80 22.--23. "diseng_sig2_Pix3_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 20.--21. "diseng_sig2_Pix3_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 18.--19. "diseng_sig2_Pix3_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 16.--17. "diseng_sig2_Pix2_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 14.--15. "diseng_sig2_Pix2_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 12.--13. "diseng_sig2_Pix2_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 10.--11. "diseng_sig2_Pix1_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 8.--9. "diseng_sig2_Pix1_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 6.--7. "diseng_sig2_Pix1_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 4.--5. "diseng_sig2_Pix0_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x80 2.--3. "diseng_sig2_Pix0_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x80 0.--1. "diseng_sig2_Pix0_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x84 "diseng_sig2_Vector1_Cluster1,Cluster 1. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x84 22.--23. "diseng_sig2_Pix3_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 20.--21. "diseng_sig2_Pix3_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 18.--19. "diseng_sig2_Pix3_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 16.--17. "diseng_sig2_Pix2_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 14.--15. "diseng_sig2_Pix2_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 12.--13. "diseng_sig2_Pix2_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 10.--11. "diseng_sig2_Pix1_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 8.--9. "diseng_sig2_Pix1_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 6.--7. "diseng_sig2_Pix1_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 4.--5. "diseng_sig2_Pix0_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x84 2.--3. "diseng_sig2_Pix0_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x84 0.--1. "diseng_sig2_Pix0_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x88 "diseng_sig2_Vector2_Cluster1,Cluster 1. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0x88 22.--23. "diseng_sig2_Pix3_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 20.--21. "diseng_sig2_Pix3_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 18.--19. "diseng_sig2_Pix3_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 16.--17. "diseng_sig2_Pix2_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 14.--15. "diseng_sig2_Pix2_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 12.--13. "diseng_sig2_Pix2_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 10.--11. "diseng_sig2_Pix1_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 8.--9. "diseng_sig2_Pix1_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 6.--7. "diseng_sig2_Pix1_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 4.--5. "diseng_sig2_Pix0_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x88 2.--3. "diseng_sig2_Pix0_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x88 0.--1. "diseng_sig2_Pix0_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x8C "diseng_sig2_Vector3_Cluster1,Cluster 1. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0x8C 22.--23. "diseng_sig2_Pix3_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 20.--21. "diseng_sig2_Pix3_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 18.--19. "diseng_sig2_Pix3_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 16.--17. "diseng_sig2_Pix2_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 14.--15. "diseng_sig2_Pix2_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 12.--13. "diseng_sig2_Pix2_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 10.--11. "diseng_sig2_Pix1_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 8.--9. "diseng_sig2_Pix1_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 6.--7. "diseng_sig2_Pix1_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 4.--5. "diseng_sig2_Pix0_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x8C 2.--3. "diseng_sig2_Pix0_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x8C 0.--1. "diseng_sig2_Pix0_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x90 "diseng_sig2_Status_Cluster2,Cluster 2. Status" bitfld.long 0x90 7. "diseng_sig2_Sts31_Cluster2,Evaluation of Vector3_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 6. "diseng_sig2_Sts30_Cluster2,Evaluation of Vector3_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 5. "diseng_sig2_Sts21_Cluster2,Evaluation of Vector2_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 4. "diseng_sig2_Sts20_Cluster2,Evaluation of Vector2_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 3. "diseng_sig2_Sts11_Cluster2,Evaluation of Vector1_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 2. "diseng_sig2_Sts10_Cluster2,Evaluation of Vector1_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 1. "diseng_sig2_Sts01_Cluster2,Evaluation of Vector0_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 0. "diseng_sig2_Sts00_Cluster2,Evaluation of Vector0_Cluster2 against reference Ref0_Cluster2" "0,1" line.long 0x94 "diseng_sig2_Counter_Cluster2,Cluster 2. Match and Error Counters" hexmask.long.byte 0x94 16.--23. 1. "diseng_sig2_ErrorCount_Cluster2,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x94 0.--7. 1. "diseng_sig2_MatchCount_Cluster2,Number of evaluations where at least one match occurred" line.long 0x98 "diseng_sig2_Vector0_Cluster2,Cluster 2. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x98 22.--23. "diseng_sig2_Pix3_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 20.--21. "diseng_sig2_Pix3_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 18.--19. "diseng_sig2_Pix3_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 16.--17. "diseng_sig2_Pix2_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 14.--15. "diseng_sig2_Pix2_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 12.--13. "diseng_sig2_Pix2_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 10.--11. "diseng_sig2_Pix1_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 8.--9. "diseng_sig2_Pix1_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 6.--7. "diseng_sig2_Pix1_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 4.--5. "diseng_sig2_Pix0_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x98 2.--3. "diseng_sig2_Pix0_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x98 0.--1. "diseng_sig2_Pix0_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0x9C "diseng_sig2_Vector1_Cluster2,Cluster 2. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x9C 22.--23. "diseng_sig2_Pix3_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 20.--21. "diseng_sig2_Pix3_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 18.--19. "diseng_sig2_Pix3_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 16.--17. "diseng_sig2_Pix2_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 14.--15. "diseng_sig2_Pix2_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 12.--13. "diseng_sig2_Pix2_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 10.--11. "diseng_sig2_Pix1_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 8.--9. "diseng_sig2_Pix1_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 6.--7. "diseng_sig2_Pix1_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 4.--5. "diseng_sig2_Pix0_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x9C 2.--3. "diseng_sig2_Pix0_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x9C 0.--1. "diseng_sig2_Pix0_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA0 "diseng_sig2_Vector2_Cluster2,Cluster 2. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0xA0 22.--23. "diseng_sig2_Pix3_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 20.--21. "diseng_sig2_Pix3_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 18.--19. "diseng_sig2_Pix3_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 16.--17. "diseng_sig2_Pix2_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 14.--15. "diseng_sig2_Pix2_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 12.--13. "diseng_sig2_Pix2_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 10.--11. "diseng_sig2_Pix1_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 8.--9. "diseng_sig2_Pix1_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 6.--7. "diseng_sig2_Pix1_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 4.--5. "diseng_sig2_Pix0_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA0 2.--3. "diseng_sig2_Pix0_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA0 0.--1. "diseng_sig2_Pix0_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA4 "diseng_sig2_Vector3_Cluster2,Cluster 2. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0xA4 22.--23. "diseng_sig2_Pix3_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 20.--21. "diseng_sig2_Pix3_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 18.--19. "diseng_sig2_Pix3_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 16.--17. "diseng_sig2_Pix2_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 14.--15. "diseng_sig2_Pix2_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 12.--13. "diseng_sig2_Pix2_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 10.--11. "diseng_sig2_Pix1_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 8.--9. "diseng_sig2_Pix1_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 6.--7. "diseng_sig2_Pix1_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 4.--5. "diseng_sig2_Pix0_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA4 2.--3. "diseng_sig2_Pix0_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA4 0.--1. "diseng_sig2_Pix0_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA8 "diseng_sig2_Status_Cluster3,Cluster 3. Status" bitfld.long 0xA8 7. "diseng_sig2_Sts31_Cluster3,Evaluation of Vector3_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 6. "diseng_sig2_Sts30_Cluster3,Evaluation of Vector3_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 5. "diseng_sig2_Sts21_Cluster3,Evaluation of Vector2_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 4. "diseng_sig2_Sts20_Cluster3,Evaluation of Vector2_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 3. "diseng_sig2_Sts11_Cluster3,Evaluation of Vector1_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 2. "diseng_sig2_Sts10_Cluster3,Evaluation of Vector1_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 1. "diseng_sig2_Sts01_Cluster3,Evaluation of Vector0_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 0. "diseng_sig2_Sts00_Cluster3,Evaluation of Vector0_Cluster3 against reference Ref0_Cluster3" "0,1" line.long 0xAC "diseng_sig2_Counter_Cluster3,Cluster 3. Match and Error Counters" hexmask.long.byte 0xAC 16.--23. 1. "diseng_sig2_ErrorCount_Cluster3,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0xAC 0.--7. 1. "diseng_sig2_MatchCount_Cluster3,Number of evaluations where at least one match occurred" line.long 0xB0 "diseng_sig2_Vector0_Cluster3,Cluster 3. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0xB0 22.--23. "diseng_sig2_Pix3_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 20.--21. "diseng_sig2_Pix3_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 18.--19. "diseng_sig2_Pix3_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 16.--17. "diseng_sig2_Pix2_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 14.--15. "diseng_sig2_Pix2_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 12.--13. "diseng_sig2_Pix2_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 10.--11. "diseng_sig2_Pix1_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 8.--9. "diseng_sig2_Pix1_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 6.--7. "diseng_sig2_Pix1_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 4.--5. "diseng_sig2_Pix0_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB0 2.--3. "diseng_sig2_Pix0_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB0 0.--1. "diseng_sig2_Pix0_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xB4 "diseng_sig2_Vector1_Cluster3,Cluster 3. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0xB4 22.--23. "diseng_sig2_Pix3_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 20.--21. "diseng_sig2_Pix3_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 18.--19. "diseng_sig2_Pix3_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 16.--17. "diseng_sig2_Pix2_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 14.--15. "diseng_sig2_Pix2_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 12.--13. "diseng_sig2_Pix2_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 10.--11. "diseng_sig2_Pix1_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 8.--9. "diseng_sig2_Pix1_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 6.--7. "diseng_sig2_Pix1_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 4.--5. "diseng_sig2_Pix0_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB4 2.--3. "diseng_sig2_Pix0_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB4 0.--1. "diseng_sig2_Pix0_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xB8 "diseng_sig2_Vector2_Cluster3,Cluster 3. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0xB8 22.--23. "diseng_sig2_Pix3_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 20.--21. "diseng_sig2_Pix3_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 18.--19. "diseng_sig2_Pix3_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 16.--17. "diseng_sig2_Pix2_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 14.--15. "diseng_sig2_Pix2_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 12.--13. "diseng_sig2_Pix2_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 10.--11. "diseng_sig2_Pix1_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 8.--9. "diseng_sig2_Pix1_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 6.--7. "diseng_sig2_Pix1_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 4.--5. "diseng_sig2_Pix0_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB8 2.--3. "diseng_sig2_Pix0_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB8 0.--1. "diseng_sig2_Pix0_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xBC "diseng_sig2_Vector3_Cluster3,Cluster 3. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0xBC 22.--23. "diseng_sig2_Pix3_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 20.--21. "diseng_sig2_Pix3_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 18.--19. "diseng_sig2_Pix3_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 16.--17. "diseng_sig2_Pix2_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 14.--15. "diseng_sig2_Pix2_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 12.--13. "diseng_sig2_Pix2_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 10.--11. "diseng_sig2_Pix1_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 8.--9. "diseng_sig2_Pix1_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 6.--7. "diseng_sig2_Pix1_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 4.--5. "diseng_sig2_Pix0_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xBC 2.--3. "diseng_sig2_Pix0_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xBC 0.--1. "diseng_sig2_Pix0_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xC0 "diseng_sig2_PixCnt_Stats0_Win0,Pixel Counter Register. Statistics Block 0. Window 0" hexmask.long 0xC0 0.--27. 1. "diseng_sig2_Px_Cnt_S0_Win0,Pixel counter determines number of valid pixels in related window." line.long 0xC4 "diseng_sig2_PixMax_Stats0_Win0,Pixel Max Values Register. Statistics Block 0. Window 0" hexmask.long.byte 0xC4 16.--23. 1. "diseng_sig2_Rd_Max_S0_Win0,Max value of red component of pixels in related window." newline hexmask.long.byte 0xC4 8.--15. 1. "diseng_sig2_Gn_Max_S0_Win0,Max value of green component of pixels in related window." newline hexmask.long.byte 0xC4 0.--7. 1. "diseng_sig2_Bl_Max_S0_Win0,Max value of blue component of pixels in related window." line.long 0xC8 "diseng_sig2_PixMin_Stats0_Win0,Pixel Min Values Register. Statistics Block 0. Window 0" hexmask.long.byte 0xC8 16.--23. 1. "diseng_sig2_Rd_Min_S0_Win0,Min value of red component of pixels in related window." newline hexmask.long.byte 0xC8 8.--15. 1. "diseng_sig2_Gn_Min_S0_Win0,Min value of green component of pixels in related window." newline hexmask.long.byte 0xC8 0.--7. 1. "diseng_sig2_Bl_Min_S0_Win0,Min value of blue component of pixels in related window." line.long 0xCC "diseng_sig2_RedSum_Stats0_Win0,Red Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xCC 0.--31. 1. "diseng_sig2_Rd_Sum_S0_Win0,Sum of Red Component Values of Pixels in related Window." line.long 0xD0 "diseng_sig2_GreenSum_Stats0_Win0,Green Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD0 0.--31. 1. "diseng_sig2_Gn_Sum_S0_Win0,Sum of Green Component Values of Pixels in related Window." line.long 0xD4 "diseng_sig2_BlueSum_Stats0_Win0,Blue Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD4 0.--31. 1. "diseng_sig2_Bl_Sum_S0_Win0,Sum of Blue Component Values of Pixels in related Window." line.long 0xD8 "diseng_sig2_LumSum_Stats0_Win0,Luminance Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD8 0.--31. 1. "diseng_sig2_Lm_Sum_S0_Win0,Sum of Luminance Values of Pixels in related Window." line.long 0xDC "diseng_sig2_PixCnt_Stats1_Win0,Pixel Counter Register. Statistics Block 1. Window 0" hexmask.long 0xDC 0.--27. 1. "diseng_sig2_Px_Cnt_S1_Win0,Pixel counter determines number of valid pixels in related window." line.long 0xE0 "diseng_sig2_PixMax_Stats1_Win0,Pixel Max Values Register. Statistics Block 1. Window 0" hexmask.long.byte 0xE0 16.--23. 1. "diseng_sig2_Rd_Max_S1_Win0,Max value of red component of pixels in related window." newline hexmask.long.byte 0xE0 8.--15. 1. "diseng_sig2_Gn_Max_S1_Win0,Max value of green component of pixels in related window." newline hexmask.long.byte 0xE0 0.--7. 1. "diseng_sig2_Bl_Max_S1_Win0,Max value of blue component of pixels in related window." line.long 0xE4 "diseng_sig2_PixMin_Stats1_Win0,Pixel Min Values Register. Statistics Block 1. Window 0" hexmask.long.byte 0xE4 16.--23. 1. "diseng_sig2_Rd_Min_S1_Win0,Min value of red component of pixels in related window." newline hexmask.long.byte 0xE4 8.--15. 1. "diseng_sig2_Gn_Min_S1_Win0,Min value of green component of pixels in related window." newline hexmask.long.byte 0xE4 0.--7. 1. "diseng_sig2_Bl_Min_S1_Win0,Min value of blue component of pixels in related window." line.long 0xE8 "diseng_sig2_RedSum_Stats1_Win0,Red Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xE8 0.--31. 1. "diseng_sig2_Rd_Sum_S1_Win0,Sum of Red Component Values of Pixels in related Window." line.long 0xEC "diseng_sig2_GreenSum_Stats1_Win0,Green Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xEC 0.--31. 1. "diseng_sig2_Gn_Sum_S1_Win0,Sum of Green Component Values of Pixels in related Window." line.long 0xF0 "diseng_sig2_BlueSum_Stats1_Win0,Blue Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xF0 0.--31. 1. "diseng_sig2_Bl_Sum_S1_Win0,Sum of Blue Component Values of Pixels in related Window." line.long 0xF4 "diseng_sig2_PixCnt_Stats0_Win1,Pixel Counter Register. Statistics Block 0. Window 1" hexmask.long 0xF4 0.--27. 1. "diseng_sig2_Px_Cnt_S0_Win1,Pixel counter determines number of valid pixels in related window." line.long 0xF8 "diseng_sig2_PixMax_Stats0_Win1,Pixel Max Values Register. Statistics Block 0. Window 1" hexmask.long.byte 0xF8 16.--23. 1. "diseng_sig2_Rd_Max_S0_Win1,Max value of red component of pixels in related window." newline hexmask.long.byte 0xF8 8.--15. 1. "diseng_sig2_Gn_Max_S0_Win1,Max value of green component of pixels in related window." newline hexmask.long.byte 0xF8 0.--7. 1. "diseng_sig2_Bl_Max_S0_Win1,Max value of blue component of pixels in related window." line.long 0xFC "diseng_sig2_PixMin_Stats0_Win1,Pixel Min Values Register. Statistics Block 0. Window 1" hexmask.long.byte 0xFC 16.--23. 1. "diseng_sig2_Rd_Min_S0_Win1,Min value of red component of pixels in related window." newline hexmask.long.byte 0xFC 8.--15. 1. "diseng_sig2_Gn_Min_S0_Win1,Min value of green component of pixels in related window." newline hexmask.long.byte 0xFC 0.--7. 1. "diseng_sig2_Bl_Min_S0_Win1,Min value of blue component of pixels in related window." line.long 0x100 "diseng_sig2_RedSum_Stats0_Win1,Red Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x100 0.--31. 1. "diseng_sig2_Rd_Sum_S0_Win1,Sum of Red Component Values of Pixels in related Window." line.long 0x104 "diseng_sig2_GreenSum_Stats0_Win1,Green Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x104 0.--31. 1. "diseng_sig2_Gn_Sum_S0_Win1,Sum of Green Component Values of Pixels in related Window." line.long 0x108 "diseng_sig2_BlueSum_Stats0_Win1,Blue Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x108 0.--31. 1. "diseng_sig2_Bl_Sum_S0_Win1,Sum of Blue Component Values of Pixels in related Window." line.long 0x10C "diseng_sig2_LumSum_Stats0_Win1,Luminance Sum Register. Statistics Block 0. Window 1" hexmask.long 0x10C 0.--31. 1. "diseng_sig2_Lm_Sum_S0_Win1,Sum of Luminance Values of Pixels in related Window." line.long 0x110 "diseng_sig2_PixCnt_Stats1_Win1,Pixel Counter Register. Statistics Block 1. Window 1" hexmask.long 0x110 0.--27. 1. "diseng_sig2_Px_Cnt_S1_Win1,Pixel counter determines number of valid pixels in related window." line.long 0x114 "diseng_sig2_PixMax_Stats1_Win1,Pixel Max Values Register. Statistics Block 1. Window 1" hexmask.long.byte 0x114 16.--23. 1. "diseng_sig2_Rd_Max_S1_Win1,Max value of red component of pixels in related window." newline hexmask.long.byte 0x114 8.--15. 1. "diseng_sig2_Gn_Max_S1_Win1,Max value of green component of pixels in related window." newline hexmask.long.byte 0x114 0.--7. 1. "diseng_sig2_Bl_Max_S1_Win1,Max value of blue component of pixels in related window." line.long 0x118 "diseng_sig2_PixMin_Stats1_Win1,Pixel Min Values Register. Statistics Block 1. Window 1" hexmask.long.byte 0x118 16.--23. 1. "diseng_sig2_Rd_Min_S1_Win1,Min value of red component of pixels in related window." newline hexmask.long.byte 0x118 8.--15. 1. "diseng_sig2_Gn_Min_S1_Win1,Min value of green component of pixels in related window." newline hexmask.long.byte 0x118 0.--7. 1. "diseng_sig2_Bl_Min_S1_Win1,Min value of blue component of pixels in related window." line.long 0x11C "diseng_sig2_RedSum_Stats1_Win1,Red Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x11C 0.--31. 1. "diseng_sig2_Rd_Sum_S1_Win1,Sum of Red Component Values of Pixels in related Window." line.long 0x120 "diseng_sig2_GreenSum_Stats1_Win1,Green Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x120 0.--31. 1. "diseng_sig2_Gn_Sum_S1_Win1,Sum of Green Component Values of Pixels in related Window." line.long 0x124 "diseng_sig2_BlueSum_Stats1_Win1,Blue Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x124 0.--31. 1. "diseng_sig2_Bl_Sum_S1_Win1,Sum of Blue Component Values of Pixels in related Window." line.long 0x128 "diseng_sig2_PixCnt_Stats0_Win2,Pixel Counter Register. Statistics Block 0. Window 2" hexmask.long 0x128 0.--27. 1. "diseng_sig2_Px_Cnt_S0_Win2,Pixel counter determines number of valid pixels in related window." line.long 0x12C "diseng_sig2_PixMax_Stats0_Win2,Pixel Max Values Register. Statistics Block 0. Window 2" hexmask.long.byte 0x12C 16.--23. 1. "diseng_sig2_Rd_Max_S0_Win2,Max value of red component of pixels in related window." newline hexmask.long.byte 0x12C 8.--15. 1. "diseng_sig2_Gn_Max_S0_Win2,Max value of green component of pixels in related window." newline hexmask.long.byte 0x12C 0.--7. 1. "diseng_sig2_Bl_Max_S0_Win2,Max value of blue component of pixels in related window." line.long 0x130 "diseng_sig2_PixMin_Stats0_Win2,Pixel Min Values Register. Statistics Block 0. Window 2" hexmask.long.byte 0x130 16.--23. 1. "diseng_sig2_Rd_Min_S0_Win2,Min value of red component of pixels in related window." newline hexmask.long.byte 0x130 8.--15. 1. "diseng_sig2_Gn_Min_S0_Win2,Min value of green component of pixels in related window." newline hexmask.long.byte 0x130 0.--7. 1. "diseng_sig2_Bl_Min_S0_Win2,Min value of blue component of pixels in related window." line.long 0x134 "diseng_sig2_RedSum_Stats0_Win2,Red Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x134 0.--31. 1. "diseng_sig2_Rd_Sum_S0_Win2,Sum of Red Component Values of Pixels in related Window." line.long 0x138 "diseng_sig2_GreenSum_Stats0_Win2,Green Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x138 0.--31. 1. "diseng_sig2_Gn_Sum_S0_Win2,Sum of Green Component Values of Pixels in related Window." line.long 0x13C "diseng_sig2_BlueSum_Stats0_Win2,Blue Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x13C 0.--31. 1. "diseng_sig2_Bl_Sum_S0_Win2,Sum of Blue Component Values of Pixels in related Window." line.long 0x140 "diseng_sig2_LumSum_Stats0_Win2,Luminance Sum Register. Statistics Block 0. Window 2" hexmask.long 0x140 0.--31. 1. "diseng_sig2_Lm_Sum_S0_Win2,Sum of Luminance Values of Pixels in related Window." line.long 0x144 "diseng_sig2_PixCnt_Stats1_Win2,Pixel Counter Register. Statistics Block 1. Window 2" hexmask.long 0x144 0.--27. 1. "diseng_sig2_Px_Cnt_S1_Win2,Pixel counter determines number of valid pixels in related window." line.long 0x148 "diseng_sig2_PixMax_Stats1_Win2,Pixel Max Values Register. Statistics Block 1. Window 2" hexmask.long.byte 0x148 16.--23. 1. "diseng_sig2_Rd_Max_S1_Win2,Max value of red component of pixels in related window." newline hexmask.long.byte 0x148 8.--15. 1. "diseng_sig2_Gn_Max_S1_Win2,Max value of green component of pixels in related window." newline hexmask.long.byte 0x148 0.--7. 1. "diseng_sig2_Bl_Max_S1_Win2,Max value of blue component of pixels in related window." line.long 0x14C "diseng_sig2_PixMin_Stats1_Win2,Pixel Min Values Register. Statistics Block 1. Window 2" hexmask.long.byte 0x14C 16.--23. 1. "diseng_sig2_Rd_Min_S1_Win2,Min value of red component of pixels in related window." newline hexmask.long.byte 0x14C 8.--15. 1. "diseng_sig2_Gn_Min_S1_Win2,Min value of green component of pixels in related window." newline hexmask.long.byte 0x14C 0.--7. 1. "diseng_sig2_Bl_Min_S1_Win2,Min value of blue component of pixels in related window." line.long 0x150 "diseng_sig2_RedSum_Stats1_Win2,Red Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x150 0.--31. 1. "diseng_sig2_Rd_Sum_S1_Win2,Sum of Red Component Values of Pixels in related Window." line.long 0x154 "diseng_sig2_GreenSum_Stats1_Win2,Green Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x154 0.--31. 1. "diseng_sig2_Gn_Sum_S1_Win2,Sum of Green Component Values of Pixels in related Window." line.long 0x158 "diseng_sig2_BlueSum_Stats1_Win2,Blue Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x158 0.--31. 1. "diseng_sig2_Bl_Sum_S1_Win2,Sum of Blue Component Values of Pixels in related Window." line.long 0x15C "diseng_sig2_PixCnt_Stats0_Win3,Pixel Counter Register. Statistics Block 0. Window 3" hexmask.long 0x15C 0.--27. 1. "diseng_sig2_Px_Cnt_S0_Win3,Pixel counter determines number of valid pixels in related window." line.long 0x160 "diseng_sig2_PixMax_Stats0_Win3,Pixel Max Values Register. Statistics Block 0. Window 3" hexmask.long.byte 0x160 16.--23. 1. "diseng_sig2_Rd_Max_S0_Win3,Max value of red component of pixels in related window." newline hexmask.long.byte 0x160 8.--15. 1. "diseng_sig2_Gn_Max_S0_Win3,Max value of green component of pixels in related window." newline hexmask.long.byte 0x160 0.--7. 1. "diseng_sig2_Bl_Max_S0_Win3,Max value of blue component of pixels in related window." line.long 0x164 "diseng_sig2_PixMin_Stats0_Win3,Pixel Min Values Register. Statistics Block 0. Window 3" hexmask.long.byte 0x164 16.--23. 1. "diseng_sig2_Rd_Min_S0_Win3,Min value of red component of pixels in related window." newline hexmask.long.byte 0x164 8.--15. 1. "diseng_sig2_Gn_Min_S0_Win3,Min value of green component of pixels in related window." newline hexmask.long.byte 0x164 0.--7. 1. "diseng_sig2_Bl_Min_S0_Win3,Min value of blue component of pixels in related window." line.long 0x168 "diseng_sig2_RedSum_Stats0_Win3,Red Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x168 0.--31. 1. "diseng_sig2_Rd_Sum_S0_Win3,Sum of Red Component Values of Pixels in related Window." line.long 0x16C "diseng_sig2_GreenSum_Stats0_Win3,Green Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x16C 0.--31. 1. "diseng_sig2_Gn_Sum_S0_Win3,Sum of Green Component Values of Pixels in related Window." line.long 0x170 "diseng_sig2_BlueSum_Stats0_Win3,Blue Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x170 0.--31. 1. "diseng_sig2_Bl_Sum_S0_Win3,Sum of Blue Component Values of Pixels in related Window." line.long 0x174 "diseng_sig2_LumSum_Stats0_Win3,Luminance Sum Register. Statistics Block 0. Window 3" hexmask.long 0x174 0.--31. 1. "diseng_sig2_Lm_Sum_S0_Win3,Sum of Luminance Values of Pixels in related Window." line.long 0x178 "diseng_sig2_PixCnt_Stats1_Win3,Pixel Counter Register. Statistics Block 1. Window 3" hexmask.long 0x178 0.--27. 1. "diseng_sig2_Px_Cnt_S1_Win3,Pixel counter determines number of valid pixels in related window." line.long 0x17C "diseng_sig2_PixMax_Stats1_Win3,Pixel Max Values Register. Statistics Block 1. Window 3" hexmask.long.byte 0x17C 16.--23. 1. "diseng_sig2_Rd_Max_S1_Win3,Max value of red component of pixels in related window." newline hexmask.long.byte 0x17C 8.--15. 1. "diseng_sig2_Gn_Max_S1_Win3,Max value of green component of pixels in related window." newline hexmask.long.byte 0x17C 0.--7. 1. "diseng_sig2_Bl_Max_S1_Win3,Max value of blue component of pixels in related window." line.long 0x180 "diseng_sig2_PixMin_Stats1_Win3,Pixel Min Values Register. Statistics Block 1. Window 3" hexmask.long.byte 0x180 16.--23. 1. "diseng_sig2_Rd_Min_S1_Win3,Min value of red component of pixels in related window." newline hexmask.long.byte 0x180 8.--15. 1. "diseng_sig2_Gn_Min_S1_Win3,Min value of green component of pixels in related window." newline hexmask.long.byte 0x180 0.--7. 1. "diseng_sig2_Bl_Min_S1_Win3,Min value of blue component of pixels in related window." line.long 0x184 "diseng_sig2_RedSum_Stats1_Win3,Red Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x184 0.--31. 1. "diseng_sig2_Rd_Sum_S1_Win3,Sum of Red Component Values of Pixels in related Window." line.long 0x188 "diseng_sig2_GreenSum_Stats1_Win3,Green Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x188 0.--31. 1. "diseng_sig2_Gn_Sum_S1_Win3,Sum of Green Component Values of Pixels in related Window." line.long 0x18C "diseng_sig2_BlueSum_Stats1_Win3,Blue Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x18C 0.--31. 1. "diseng_sig2_Bl_Sum_S1_Win3,Sum of Blue Component Values of Pixels in related Window." wgroup.long 0x2E1000++0x3 line.long 0x0 "diseng_sig2cfg_LockUnlock0,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_sig2cfg_LockUnlock0,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2E1004++0x3 line.long 0x0 "diseng_sig2cfg_LockStatus0,Protection status of this address block." bitfld.long 0x0 8. "diseng_sig2cfg_FreezeStatus0,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_sig2cfg_PrivilegeStatus0,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_sig2cfg_LockStatus0,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2E1008++0x3 line.long 0x0 "diseng_sig2cfg_SrcSelect,Tap selection for sig2." bitfld.long 0x0 0.--1. "diseng_sig2cfg_sig2_select,Selects a source for Sig#2 unit." "0,1,2,3" wgroup.long 0x2F0000++0x3 line.long 0x0 "diseng_matrix0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_matrix0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x2F0004++0x3 line.long 0x0 "diseng_matrix0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_matrix0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_matrix0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_matrix0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x2F0008++0x1F line.long 0x0 "diseng_matrix0_StaticControl,Color Matrix static control register" bitfld.long 0x0 0. "diseng_matrix0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "diseng_matrix0_Control,Color Matrix control register" bitfld.long 0x4 5. "diseng_matrix0_AlphaInvert,Value 1 inverts the effect of the alpha mask mode when enabled (pixels with alpha value greater or equal 0." "0,1" newline bitfld.long 0x4 4. "diseng_matrix0_AlphaMask,Value 1 enables the alpha mask mode." "0,1" newline bitfld.long 0x4 0.--1. "diseng_matrix0_MODE,Operation mode for color matrix" "0,1,2,3" line.long 0x8 "diseng_matrix0_Red0,Matrix values for calculation of the red output value." hexmask.long.word 0x8 16.--28. 1. "diseng_matrix0_A12,Value for green input." newline hexmask.long.word 0x8 0.--12. 1. "diseng_matrix0_A11,Value for red input." line.long 0xC "diseng_matrix0_Red1,Matrix values for calculation of the red output value." hexmask.long.word 0xC 0.--12. 1. "diseng_matrix0_A13,Value for blue input." line.long 0x10 "diseng_matrix0_Green0,Matrix values for calculation of the green output value." hexmask.long.word 0x10 16.--28. 1. "diseng_matrix0_A22,Value for green input." newline hexmask.long.word 0x10 0.--12. 1. "diseng_matrix0_A21,Value for red input." line.long 0x14 "diseng_matrix0_Green1,Matrix values for calculation of the green output value." hexmask.long.word 0x14 0.--12. 1. "diseng_matrix0_A23,Value for blue input." line.long 0x18 "diseng_matrix0_Blue0,Matrix values for calculation of the blue output value." hexmask.long.word 0x18 16.--28. 1. "diseng_matrix0_A32,Value for green input." newline hexmask.long.word 0x18 0.--12. 1. "diseng_matrix0_A31,Value for red input." line.long 0x1C "diseng_matrix0_Blue1,Matrix values for calculation of the blue output value." hexmask.long.word 0x1C 0.--12. 1. "diseng_matrix0_A33,Value for blue input." group.long 0x2F0030++0x7 line.long 0x0 "diseng_matrix0_OffsetVector0,Offset vectors for red and green output." hexmask.long.word 0x0 16.--28. 1. "diseng_matrix0_C2,Green output offset." newline hexmask.long.word 0x0 0.--12. 1. "diseng_matrix0_C1,Red output offset." line.long 0x4 "diseng_matrix0_OffsetVector1,Offset vectors for blue and alpha output." hexmask.long.word 0x4 0.--12. 1. "diseng_matrix0_C3,Blue output offset." rgroup.long 0x2F0038++0x3 line.long 0x0 "diseng_matrix0_LastControlWord,Value of last received control word. for debugging." hexmask.long 0x0 0.--31. 1. "diseng_matrix0_L_VAL,Value of last received control word." wgroup.long 0x300000++0x3 line.long 0x0 "diseng_lut3d0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_lut3d0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x300004++0x3 line.long 0x0 "diseng_lut3d0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_lut3d0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_lut3d0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_lut3d0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x300008++0x7 line.long 0x0 "diseng_lut3d0_StaticControl,lut3d static control register" bitfld.long 0x0 0. "diseng_lut3d0_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "diseng_lut3d0_Control,lut3d control register" hexmask.long.byte 0x4 8.--11. 1. "diseng_lut3d0_IDX_BITS,CLut/CLutL: Number of msb bits of the red color input used for the LUT index input in R_TO_RGB(A) mode." newline bitfld.long 0x4 6. "diseng_lut3d0_AlphaInvert,Chooses whether to disable lookup for alpha components smaller or greater/equal than 128." "0,1" newline bitfld.long 0x4 5. "diseng_lut3d0_AlphaMask,Enables the alpha mask mode." "0,1" newline bitfld.long 0x4 3. "diseng_lut3d0_DITH_EN,Color LUT data output bitwidth select" "0,1" newline bitfld.long 0x4 0.--2. "diseng_lut3d0_MODE,Operation mode for 3D lookup table" "0,1,2,3,4,5,6,7" group.long 0x302000++0x3 line.long 0x0 "diseng_lut3d0_LUT,Look Up Table" hexmask.long.tbyte 0x0 0.--19. 1. "diseng_lut3d0_DATA,LUT Data component" wgroup.long 0x310000++0x3 line.long 0x0 "diseng_dither0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_dither0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x310004++0x3 line.long 0x0 "diseng_dither0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_dither0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_dither0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_dither0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x310008++0xB line.long 0x0 "diseng_dither0_Control,Dither Unit common control." bitfld.long 0x0 0.--1. "diseng_dither0_mode,Mode which switches Dither Unit on/off/10bit/12bit." "0,1,2,3" line.long 0x4 "diseng_dither0_DitherControl10bits,Dither Unit processing control." bitfld.long 0x4 8.--10. "diseng_dither0_red_range_select_10bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "diseng_dither0_green_range_select_10bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 0.--2. "diseng_dither0_blue_range_select_10bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" line.long 0x8 "diseng_dither0_DitherControl12bits,Dither Unit processing control." bitfld.long 0x8 24.--25. "diseng_dither0_alpha_mode,Enables/disables that dithering can be switched by alpha bit." "0,1,2,3" newline bitfld.long 0x8 20.--21. "diseng_dither0_algo_select,The number of output colors that can virtually be displayed by dithering is slightly lower than the number of physical input colors." "0,1,2,3" newline bitfld.long 0x8 16. "diseng_dither0_offset_select,Selects the method how the dither offset is calculated." "0,1" newline bitfld.long 0x8 8.--10. "diseng_dither0_red_range_select_12bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "diseng_dither0_green_range_select_12bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "diseng_dither0_blue_range_select_12bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" wgroup.long 0x311000++0x3 line.long 0x0 "diseng_dither0cfg_LockUnlock0,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_dither0cfg_LockUnlock0,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x311004++0x3 line.long 0x0 "diseng_dither0cfg_LockStatus0,Protection status of this address block." bitfld.long 0x0 8. "diseng_dither0cfg_FreezeStatus0,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_dither0cfg_PrivilegeStatus0,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_dither0cfg_LockStatus0,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x311008++0x3 line.long 0x0 "diseng_dither0cfg_PolarityCtrl0,Polarity control for display stream #0." bitfld.long 0x0 2. "diseng_dither0cfg_PolEn0,Polarity of Data_Enable signal." "0,1" newline bitfld.long 0x0 1. "diseng_dither0cfg_PolVs0,Polarity of vsync signal." "0,1" newline bitfld.long 0x0 0. "diseng_dither0cfg_PolHs0,Polarity of hsync signal." "0,1" wgroup.long 0x320000++0x3 line.long 0x0 "diseng_domainblend1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_domainblend1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x320004++0x3 line.long 0x0 "diseng_domainblend1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_domainblend1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_domainblend1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_domainblend1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x320008++0x3 line.long 0x0 "diseng_domainblend1_StaticControl,Static control settings." bitfld.long 0x0 4.--6. "diseng_domainblend1_ShdTokSel,Controls when a shadow load token is generated on the output port which controls shadow load in subsequent processing units." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 1.--3. "diseng_domainblend1_ShdLdSel,Controls when shadow fields of this unit are loaded into the active configuration in case that ShdEn is enabled." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "diseng_domainblend1_ShdEn,Enables shadowing of all RWS type fields of this unit (0 = write through 1 = shadowed)." "0: write through,1: shadowed)" wgroup.long 0x32000C++0x3 line.long 0x0 "diseng_domainblend1_ControlTrigger,Shadow load and sequence complete triggers." bitfld.long 0x0 1. "diseng_domainblend1_Trigger_Sequence_Complete,By writing a '1' to this register field you can trigger the sequence complete interrupt that will occur as soon as the pipeline is empty." "0,1" newline bitfld.long 0x0 0. "diseng_domainblend1_ShdTokGen,Writing a 1 to this will load shadow registers into the active configuration with the next start of frame and send a shadow load token to subsequent units." "0,1" group.long 0x320010++0xB line.long 0x0 "diseng_domainblend1_ModeControl,Operation mode of the domainblend" bitfld.long 0x0 0.--1. "diseng_domainblend1_MODE,Operation mode." "0,1,2,3" line.long 0x4 "diseng_domainblend1_AlphaControl,Alpha mask settings." bitfld.long 0x4 1.--3. "diseng_domainblend1_AlphaMaskMode,AlphaMaskMode determines how the output alpha is generated when AlphaMaskEnable is set to ENABLE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 0. "diseng_domainblend1_AlphaMaskEnable,Enables Alpha Mask feature." "0,1" line.long 0x8 "diseng_domainblend1_BlendControl,Options for blend operations" hexmask.long.byte 0x8 16.--23. 1. "diseng_domainblend1_BlendAlpha,Constant alpha value used for constant alpha blending" newline bitfld.long 0x8 12.--14. "diseng_domainblend1_SEC_A_BLD_FUNC,Secondary input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 8.--10. "diseng_domainblend1_PRIM_A_BLD_FUNC,Primary input alpha blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "diseng_domainblend1_SEC_C_BLD_FUNC,Secondary input color blending function" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "diseng_domainblend1_PRIM_C_BLD_FUNC,Primary input color blending function" "0,1,2,3,4,5,6,7" rgroup.long 0x32001C++0x3 line.long 0x0 "diseng_domainblend1_Timeout_Feedback,The status of primary and secondary sources waiting for pixels." bitfld.long 0x0 1. "diseng_domainblend1_SecWait,Domainblend is waiting for secondary source pixel." "0,1" newline bitfld.long 0x0 0. "diseng_domainblend1_PrimWait,Domainblend is waiting for primary source pixel." "0,1" wgroup.long 0x320020++0x3 line.long 0x0 "diseng_domainblend1_Lockup_Clear,The register can be used to internally reset domainblend if it gets stuck by pending pixels from one source." bitfld.long 0x0 0. "diseng_domainblend1_LockupClear,Internal reset for the domainblend." "0,1" group.long 0x320024++0x3 line.long 0x0 "diseng_domainblend1_Delay_Counter_En,The register enables the delay and error counters that report on the delay on prim and sec sources." bitfld.long 0x0 0. "diseng_domainblend1_DelayCountEn,Enables the delay counters." "0,1" rgroup.long 0x320028++0x13 line.long 0x0 "diseng_domainblend1_Delay_Counter_Prim,The number of inavtive clock cycles during which the domainblend is waiting for pixels from primary source." hexmask.long 0x0 0.--27. 1. "diseng_domainblend1_DelayCountPrim,Primary delay counter value" line.long 0x4 "diseng_domainblend1_Delay_Counter_Sec,The number of inavtive clock cycles during which the domainblend is waiting for pixels from secondary source." hexmask.long 0x4 0.--27. 1. "diseng_domainblend1_DelayCountSec,Secondary delay counter value" line.long 0x8 "diseng_domainblend1_Error_Counter_Prim,The number of inavtive clock cycles on the primary source till the synchronization loss of domainblend." hexmask.long 0x8 0.--27. 1. "diseng_domainblend1_ErrCountPrim,Primary error counter value" line.long 0xC "diseng_domainblend1_Error_Counter_Sec,The number of inavtive clock cycles on the secondary source till the synchronization loss of domainblend." hexmask.long 0xC 0.--27. 1. "diseng_domainblend1_ErrCountSec,Secondary error counter value" line.long 0x10 "diseng_domainblend1_Source_Status,Source protocol error detection for primary and secondary sources" bitfld.long 0x10 2. "diseng_domainblend1_WrongInput,Neither command word nor pixel data is expected." "0,1" newline bitfld.long 0x10 1. "diseng_domainblend1_WrongPixelData,A pixel data is received when a command word is expected." "0,1" newline bitfld.long 0x10 0. "diseng_domainblend1_WrongCommandWord,A command word is received when a pixel data is expected." "0,1" wgroup.long 0x32003C++0x3 line.long 0x0 "diseng_domainblend1_Source_Status_Clear,Clearing source protocol error status for both primary and secondary sources" bitfld.long 0x0 2. "diseng_domainblend1_ClearWrongInput,Clear the wrong input error status." "0,1" newline bitfld.long 0x0 1. "diseng_domainblend1_ClearWrongPixelData,Clear the wrong pixel data error status." "0,1" newline bitfld.long 0x0 0. "diseng_domainblend1_ClearWrongCommandWord,Clear the wrong command word error status." "0,1" rgroup.long 0x320040++0x7 line.long 0x0 "diseng_domainblend1_PrimControlWord,Value of last received primary control word. for debugging" hexmask.long 0x0 0.--31. 1. "diseng_domainblend1_P_VAL,Value of last received control word" line.long 0x4 "diseng_domainblend1_SecControlWord,Value of last received secondary control word. for debugging" hexmask.long 0x4 0.--31. 1. "diseng_domainblend1_S_VAL,Value of last received control word" wgroup.long 0x330000++0x3 line.long 0x0 "diseng_framegen1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_framegen1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x330004++0x3 line.long 0x0 "diseng_framegen1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_framegen1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_framegen1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_framegen1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x330008++0x87 line.long 0x0 "diseng_framegen1_FgStCtrl,FrameGen Static Control Register" bitfld.long 0x0 30. "diseng_framegen1_Force_Disable,Force a Disable of Framegen." "0,1" newline bitfld.long 0x0 4. "diseng_framegen1_FgShdTokGenSyncMode,Determines the mode for the shadow token generation." "0,1" newline bitfld.long 0x0 1.--3. "diseng_framegen1_FgSyncMode,Determines the operating mode of the framegen unit for side-by-side synchronization." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "diseng_framegen1_ShdEn,Enables shadowing for RWS type configuration fields." "0,1" line.long 0x4 "diseng_framegen1_HtCfg1,FrameGen Horizontal Timing Config Register 1" hexmask.long.word 0x4 16.--29. 1. "diseng_framegen1_Htotal,Total horizontal size of frame in pixels." newline hexmask.long.word 0x4 0.--13. 1. "diseng_framegen1_Hact,Horizontal size of active display area in pixels." line.long 0x8 "diseng_framegen1_HtCfg2,FrameGen Horizontal Timing Config Register 2" bitfld.long 0x8 31. "diseng_framegen1_HsEn,Enables generation of HSYNC pulse." "0,1" newline hexmask.long.word 0x8 16.--29. 1. "diseng_framegen1_Hsbp,Width of HSYNC pulse plus width of horizontal back porch in pixels." newline hexmask.long.word 0x8 0.--13. 1. "diseng_framegen1_Hsync,Width of HSYNC pulse in pixels." line.long 0xC "diseng_framegen1_VtCfg1,FrameGen Vertical Timing Config Register 1" hexmask.long.word 0xC 16.--29. 1. "diseng_framegen1_Vtotal,Total vertical size of frame in lines." newline hexmask.long.word 0xC 0.--13. 1. "diseng_framegen1_Vact,Vertical size of active display area in lines." line.long 0x10 "diseng_framegen1_VtCfg2,FrameGen Vertical Timing Config Register 2" bitfld.long 0x10 31. "diseng_framegen1_VsEn,Enables generation of VSYNC pulse." "0,1" newline hexmask.long.word 0x10 16.--29. 1. "diseng_framegen1_Vsbp,Width of VSYNC pulse plus width of vertical back porch in lines." newline hexmask.long.word 0x10 0.--13. 1. "diseng_framegen1_Vsync,Width of VSYNC pulse in lines." line.long 0x14 "diseng_framegen1_Int0Config,Coordinates of the trigger point for generation of the Int0 interrupt signal" bitfld.long 0x14 31. "diseng_framegen1_Int0En,Enables Int0." "0,1" newline hexmask.long.word 0x14 16.--29. 1. "diseng_framegen1_Int0Row,Specifies on which row of the display raster the Int0 signal is triggered (1 ." newline bitfld.long 0x14 15. "diseng_framegen1_Int0HsEn,When enabled Int0Row setting is ignored so that the interrupt occurs every line at position given by Int0Col." "0,1" newline hexmask.long.word 0x14 0.--13. 1. "diseng_framegen1_Int0Col,Specifies on which column of the display raster the Int0 signal is triggered (1 ." line.long 0x18 "diseng_framegen1_Int1Config,Coordinates of the trigger point for generation of the Int1 interrupt signal" bitfld.long 0x18 31. "diseng_framegen1_Int1En,Enables Int1 (irq[1])." "0,1" newline hexmask.long.word 0x18 16.--29. 1. "diseng_framegen1_Int1Row,Specifies on which row of the display raster the Int1 signal is triggered (1 ." newline bitfld.long 0x18 15. "diseng_framegen1_Int1HsEn,When enabled Int1Row setting is ignored so that the interrupt occurs every line at position given by Int1Col." "0,1" newline hexmask.long.word 0x18 0.--13. 1. "diseng_framegen1_Int1Col,Specifies on which column of the display raster the Int1 signal is triggered (1 ." line.long 0x1C "diseng_framegen1_Int2Config,Coordinates of the trigger point for generation of the Int2 interrupt signal" bitfld.long 0x1C 31. "diseng_framegen1_Int2En,Enables Int2." "0,1" newline hexmask.long.word 0x1C 16.--29. 1. "diseng_framegen1_Int2Row,Specifies on which row of the display raster the Int2 signal is triggered (1 ." newline bitfld.long 0x1C 15. "diseng_framegen1_Int2HsEn,When enabled Int2Row setting is ignored so that the interrupt occurs every line at position given by Int2Col." "0,1" newline hexmask.long.word 0x1C 0.--13. 1. "diseng_framegen1_Int2Col,Specifies on which column of the display raster the Int2 signal is triggered (1 ." line.long 0x20 "diseng_framegen1_Int3Config,Coordinates of the trigger point for generation of the Int3 interrupt signal" bitfld.long 0x20 31. "diseng_framegen1_Int3En,Enables Int3." "0,1" newline hexmask.long.word 0x20 16.--29. 1. "diseng_framegen1_Int3Row,Specifies on which row of the display raster the Int3 signal is triggered (1 ." newline bitfld.long 0x20 15. "diseng_framegen1_Int3HsEn,When enabled Int3Row setting is ignored so that the interrupt occurs every line at position given by Int3Col." "0,1" newline hexmask.long.word 0x20 0.--13. 1. "diseng_framegen1_Int3Col,Specifies on which column of the display raster the Int3 signal is triggered (1 ." line.long 0x24 "diseng_framegen1_PKickConfig,Coordinates of the trigger point for generation of the primary kick signal" bitfld.long 0x24 31. "diseng_framegen1_PKickEn,Enables pkick signal." "0,1" newline hexmask.long.word 0x24 16.--29. 1. "diseng_framegen1_PKickRow,Specifies on which row of the display raster the pkick signal is triggered (1 ." newline bitfld.long 0x24 15. "diseng_framegen1_PKickInt0En,If enabled maps the primary kick signal (pkick) on the interrupt pin int0." "0,1" newline hexmask.long.word 0x24 0.--13. 1. "diseng_framegen1_PKickCol,Specifies on which column of the display raster the pkick signal is triggered (1 ." line.long 0x28 "diseng_framegen1_SKickConfig,Coordinates of the trigger point for generation of the secondary kick signal" bitfld.long 0x28 31. "diseng_framegen1_SKickEn,Enables generation of internal skick signal." "0,1" newline bitfld.long 0x28 30. "diseng_framegen1_SKickTrig,Select source for skick generation." "0,1" newline hexmask.long.word 0x28 16.--29. 1. "diseng_framegen1_SKickRow,Specifies on which row of the display raster the skick signal is triggered (1 ." newline bitfld.long 0x28 15. "diseng_framegen1_SKickInt1En,If enabled maps the secondary kick signal (skick) on the interrupt pin int1." "0,1" newline hexmask.long.word 0x28 0.--13. 1. "diseng_framegen1_SKickCol,Specifies on which column of the display raster the skick signal is triggered (1 ." line.long 0x2C "diseng_framegen1_SecStatConfig,Configuration register for controlling the behaviour of the SecSyncStat field in the FgSecChStat register." hexmask.long.byte 0x2C 8.--11. 1. "diseng_framegen1_LevSkewInRange,Number of continous frames the measured skew value shall be within the range defined by SyncRangeLow and SyncRangeHigh." newline hexmask.long.byte 0x2C 4.--7. 1. "diseng_framegen1_LevBadFrames,Not used." newline hexmask.long.byte 0x2C 0.--3. 1. "diseng_framegen1_LevGoodFrames,Number of continous correct frames that must be processed before SecSyncStat field goes 1 (in sync)." line.long 0x30 "diseng_framegen1_FgSRCR1,FrameGen Skew Regulation Control Register 1." bitfld.long 0x30 30.--31. "diseng_framegen1_CsSyncSel,Select of external synchronization sync protocol." "0,1,2,3" newline bitfld.long 0x30 13. "diseng_framegen1_SRExt,Enables synchronization of FrameGen timing to external capture source (Capture Sync Mode)." "0,1" newline bitfld.long 0x30 11.--12. "diseng_framegen1_SRClock_Mode,Synchronization mode of FrameGen timing with clock regulation." "0,1,2,3" newline bitfld.long 0x30 10. "diseng_framegen1_SREpOff,Disables the skew Extrapolation in blanking." "0,1" newline bitfld.long 0x30 9. "diseng_framegen1_SRDbgDisp,If enabled the pixels are displayed that are read from FIFO when secondary channel is not in sync yet." "0,1" newline bitfld.long 0x30 7.--8. "diseng_framegen1_SRQVal,If SRQAlign is enabled this field determines the fixed value of the two LSB bits of HTOTAL." "0,1,2,3" newline bitfld.long 0x30 6. "diseng_framegen1_SRQAlign,Enables alignment of HTOTAL to be a multiple of 4." "0,1" newline bitfld.long 0x30 5. "diseng_framegen1_SRFastSync,Fast Synchronization Mode." "0,1" newline bitfld.long 0x30 4. "diseng_framegen1_SREven,Total line length HTOTAL is even when SRAdj is enabled." "0,1" newline bitfld.long 0x30 3. "diseng_framegen1_SRAdj,Enables line length adjustment for HTOTAL." "0,1" newline bitfld.long 0x30 1.--2. "diseng_framegen1_SRMode,Skew Control Operating Mode." "0,1,2,3" newline bitfld.long 0x30 0. "diseng_framegen1_SREn,If enabled skew control for secondary channel is active." "0,1" line.long 0x34 "diseng_framegen1_FgSRCR2,FrameGen Skew Regulation Control Register 2" hexmask.long.word 0x34 16.--29. 1. "diseng_framegen1_HTotalMax,Maximum value of htotal when horizontal regulation is enabled." newline hexmask.long.word 0x34 0.--13. 1. "diseng_framegen1_HTotalMin,Minimum value of htotal when horizontal regulation is enabled." line.long 0x38 "diseng_framegen1_FgSRCR3,FrameGen Skew Regulation Control Register 3" hexmask.long.word 0x38 16.--29. 1. "diseng_framegen1_VTotalMax,Maximum value of vtotal when vertical regulation is enabled." newline hexmask.long.word 0x38 0.--13. 1. "diseng_framegen1_VTotalMin,Minimum value of vtotal when vertical regulation is enabled." line.long 0x3C "diseng_framegen1_FgSRCR4,FrameGen Skew Regulation Control Register 4" hexmask.long 0x3C 0.--28. 1. "diseng_framegen1_TargetSkew,Horizontal target skew value for horizontal and vertical skew regulation (signed value)." line.long 0x40 "diseng_framegen1_FgSRCR5,FrameGen Skew Regulation Control Register 5" hexmask.long 0x40 0.--28. 1. "diseng_framegen1_SyncRangeLow,Sync range of horizontal and vertical skew regulation." line.long 0x44 "diseng_framegen1_FgSRCR6,FrameGen Skew Regulation Control Register 6" hexmask.long 0x44 0.--28. 1. "diseng_framegen1_SyncRangeHigh,Sync range of horizontal and vertical skew regulation." line.long 0x48 "diseng_framegen1_FgSRCR7,FrameGen Skew Regulation Control Register 7" hexmask.long.byte 0x48 27.--31. 1. "diseng_framegen1_VerticalIncrement,Vertical increment between two synchronization trigger points." newline hexmask.long 0x48 0.--26. 1. "diseng_framegen1_HorizontalIncrement,Horizontal increment between two synchronization trigger points." line.long 0x4C "diseng_framegen1_FgSRCR8,FrameGen Skew Regulation Control Register 8" hexmask.long.tbyte 0x4C 0.--17. 1. "diseng_framegen1_StartOffset,Pixel Offset between the frist pixel of the pipeline and the regulation start of the external timing input." line.long 0x50 "diseng_framegen1_FgSRCR9,FrameGen Skew Regulation Control Register 9" hexmask.long.tbyte 0x50 0.--19. 1. "diseng_framegen1_clockperiod_ref,Reference clock period for clock regulation." line.long 0x54 "diseng_framegen1_FgSRCR10,FrameGen Skew Regulation Control Register 10" hexmask.long.tbyte 0x54 0.--19. 1. "diseng_framegen1_clockperiod_min,Minimum clock period for clock regulation." line.long 0x58 "diseng_framegen1_FgSRCR11,FrameGen Skew Regulation Control Register 11" hexmask.long.tbyte 0x58 0.--19. 1. "diseng_framegen1_clockperiod_max,Maximum clock period for clock regulation." line.long 0x5C "diseng_framegen1_FgSRCR12,FrameGen Skew Regulation Control Register 12" hexmask.long 0x5C 0.--31. 1. "diseng_framegen1_pixel_period,Input pixel period of one output pixel (fixed point value 8." line.long 0x60 "diseng_framegen1_FgSRCR13,FrameGen Skew Regulation Control Register 13" bitfld.long 0x60 7. "diseng_framegen1_CMSyncSel,Select of clock measurement sync protocol." "0,1" newline bitfld.long 0x60 4.--6. "diseng_framegen1_CSR_updaterate,Update rate for clock measurement." "0,1,2,3,4,5,6,7" newline bitfld.long 0x60 2.--3. "diseng_framegen1_CSR_filterrate,Filter of clock measurement results." "0,1,2,3" line.long 0x64 "diseng_framegen1_FgSRCR14,FrameGen Skew Regulation Control Register 14" hexmask.long.word 0x64 16.--29. 1. "diseng_framegen1_SkewOffset_Threshold,Allowed Skew offset before skew regulation starts re-correcting." newline bitfld.long 0x64 12.--14. "diseng_framegen1_CSR_phasegainsync,Clock period offset for phase regulation." "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 8.--10. "diseng_framegen1_CSR_phasegain,Clock period offset for phase regulation." "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 7. "diseng_framegen1_CSR_ramprate_en,Enables ramp steps." "0,1" newline bitfld.long 0x64 4.--6. "diseng_framegen1_CSR_ramprate,Ramp step size for phase regulation." "0,1,2,3,4,5,6,7" newline bitfld.long 0x64 3. "diseng_framegen1_CSR_SSCGTrack_en,Enables SSCG regulation." "0,1" newline bitfld.long 0x64 0. "diseng_framegen1_Clockperiod_val,Set this bit if the clockperiod registers from framegen are setup and valid." "0,1" line.long 0x68 "diseng_framegen1_FgSRCR15,FrameGen Skew Regulation Control Register 15" hexmask.long.word 0x68 16.--29. 1. "diseng_framegen1_CsDelay,Delay (in lines) between the first HSYNC of external capture timing " newline bitfld.long 0x68 15. "diseng_framegen1_CsVsPol,Polarity of VSYNC synchronization signal of external capture source." "0,1" newline bitfld.long 0x68 14. "diseng_framegen1_CsHsPol,Polarity of HSYNC synchronization signal of external capture source." "0,1" line.long 0x6C "diseng_framegen1_FgKSDR,FrameGen Kick System Debug Register" bitfld.long 0x6C 16.--18. "diseng_framegen1_SCntCplMax,Maximum Value for spendcnt_cpl_s complementary secondary kick counter." "0,1,2,3,4,5,6,7" newline bitfld.long 0x6C 0.--2. "diseng_framegen1_PCntCplMax,Maximum Value for ppendcnt_cpl_s complementary primary kick counter." "0,1,2,3,4,5,6,7" line.long 0x70 "diseng_framegen1_PaCfg,FrameGen Primary Area Config Register 1 (shadowed)" hexmask.long.word 0x70 16.--29. 1. "diseng_framegen1_Pstarty,Primary screen upper left corner y component." newline hexmask.long.word 0x70 0.--13. 1. "diseng_framegen1_Pstartx,Primary screen upper left corner x component." line.long 0x74 "diseng_framegen1_SaCfg,FrameGen Secondary Area Config Register 1 (shadowed)" hexmask.long.word 0x74 16.--29. 1. "diseng_framegen1_Sstarty,Secondary screen upper left corner y component." newline hexmask.long.word 0x74 0.--13. 1. "diseng_framegen1_Sstartx,Secondary screen upper left corner x component." line.long 0x78 "diseng_framegen1_FgInCtrl,FrameGen Input Control Register (shadowed)" bitfld.long 0x78 4. "diseng_framegen1_EnSecAlpha,When enabled alpha plane of secondary channel is considered for screen composition." "0,1" newline bitfld.long 0x78 3. "diseng_framegen1_EnPrimAlpha,When enabled alpha plane of primary channel is considered for screen composition." "0,1" newline bitfld.long 0x78 0.--2. "diseng_framegen1_FgDm,Frame Generator Display Mode." "0,1,2,3,4,5,6,7" line.long 0x7C "diseng_framegen1_FgInCtrlPanic,FrameGen Input Control Panic Register (shadowed)" bitfld.long 0x7C 4. "diseng_framegen1_EnSecAlphaPanic,When enabled alpha plane of secondary channel is considered for screen composition." "0,1" newline bitfld.long 0x7C 3. "diseng_framegen1_EnPrimAlphaPanic,When enabled alpha plane of primary channel is considered for screen composition." "0,1" newline bitfld.long 0x7C 0.--2. "diseng_framegen1_FgDmPanic,Frame Generator Display Mode when Panic Switch active." "0,1,2,3,4,5,6,7" line.long 0x80 "diseng_framegen1_FgCCR,FrameGen Constant Color Register (shadowed)" bitfld.long 0x80 30.--31. "diseng_framegen1_CcAlpha,Constant color - alpha value." "0,1,2,3" newline hexmask.long.word 0x80 20.--29. 1. "diseng_framegen1_CcRed,Constant color - red component." newline hexmask.long.word 0x80 10.--19. 1. "diseng_framegen1_CcGreen,Constant color - green component." newline hexmask.long.word 0x80 0.--9. 1. "diseng_framegen1_CcBlue,Constant color - blue component." line.long 0x84 "diseng_framegen1_FgEnable,FrameGen Enable Register" bitfld.long 0x84 0. "diseng_framegen1_FgEn,Frame Generator Enable." "0,1" wgroup.long 0x330090++0x3 line.long 0x0 "diseng_framegen1_FgSlr,FrameGen Shadow Load Register" bitfld.long 0x0 0. "diseng_framegen1_ShdTokGen,Generate shadow load token." "0,1" rgroup.long 0x330094++0xB line.long 0x0 "diseng_framegen1_FgEnSts,FrameGen Enable Status Register" bitfld.long 0x0 1. "diseng_framegen1_PanicStat,Current status of panic mode (0=normal operation mode 1=panic mode; not locked)." "0: normal operation mode,1: panic mode; not locked)" newline bitfld.long 0x0 0. "diseng_framegen1_EnSts,Indicates the current operating mode of the frame generator." "0,1" line.long 0x4 "diseng_framegen1_FgTimeStamp,Time stamp status." hexmask.long.tbyte 0x4 14.--31. 1. "diseng_framegen1_FrameIndex,Index of the output frame that is currently generated (starts with 0 after reset for first output frame)." newline hexmask.long.word 0x4 0.--13. 1. "diseng_framegen1_LineIndex,Index of the output line that is currently generated (starts with 0 for first active output line)." line.long 0x8 "diseng_framegen1_FgChStat,FrameGen Channel Status Register" bitfld.long 0x8 24. "diseng_framegen1_SecSyncStat,Current status secondary channel synchronization (0 = out of sync 1 = in sync; not locked)." "0: out of sync,1: in sync; not locked)" newline bitfld.long 0x8 17. "diseng_framegen1_SkewRangeErr,The secondary channel skew value has run out of the limit defined by SyncRangeLow and SyncRangeHigh." "0,1" newline bitfld.long 0x8 16. "diseng_framegen1_SFifoEmpty,Read request to empty secondary pixel FIFO detected." "0,1" newline bitfld.long 0x8 8. "diseng_framegen1_PrimSyncStat,Current status primary channel synchronization (0 = out of sync (frame tearing) 1 = in sync (normal operation); not locked)." "0: out of sync,1: in sync" newline bitfld.long 0x8 0. "diseng_framegen1_PFifoEmpty,Read request to empty primary pixel FIFO detected." "0,1" wgroup.long 0x3300A0++0x3 line.long 0x0 "diseng_framegen1_FgChStatClr,FrameGen Channel Status Clear Register" bitfld.long 0x0 16. "diseng_framegen1_ClrSecStat,Clears SFifoEmpty and SkewRangeErr in FgChStat register." "0,1" newline bitfld.long 0x0 0. "diseng_framegen1_ClrPrimStat,Clears PFifoEmpty in FgChStat register." "0,1" rgroup.long 0x3300A4++0xB line.long 0x0 "diseng_framegen1_FgSkewMon,FrameGen Skew Monitor Register for Secondary Channel Skew Control" hexmask.long 0x0 0.--28. 1. "diseng_framegen1_SkewMon,Current skew value monitor for secondary channel skew control." line.long 0x4 "diseng_framegen1_FgPFifoMin,FrameGen Primary FIFO Min Fill Register" hexmask.long.word 0x4 0.--15. 1. "diseng_framegen1_PFifoMin,Shows the minimal fill level of the primary channel pixel FIFO." line.long 0x8 "diseng_framegen1_FgPFifoMax,FrameGen Primary FIFO Max Fill Register" hexmask.long.word 0x8 0.--15. 1. "diseng_framegen1_PFifoMax,Shows the maximal fill level of the primary channel pixel FIFO." wgroup.long 0x3300B0++0x3 line.long 0x0 "diseng_framegen1_FgPFifoFillClr,FrameGen Primary FIFO Fill Clear Register" bitfld.long 0x0 0. "diseng_framegen1_PFifoFillClr,Write for clearing register FgPFifoMin and FgPFifoMax." "0,1" group.long 0x3300B4++0x3 line.long 0x0 "diseng_framegen1_FgPFifoTres,FrameGen Primary FIFO Thresholds" hexmask.long.word 0x0 16.--31. 1. "diseng_framegen1_PFifoTres1,Threshold value for primary channel pixel FIFO." newline hexmask.long.word 0x0 0.--15. 1. "diseng_framegen1_PFifoTres0,Threshold value for primary channel pixel FIFO." rgroup.long 0x3300B8++0x7 line.long 0x0 "diseng_framegen1_FgSFifoMin,FrameGen Secondary FIFO Min Fill Register" hexmask.long.word 0x0 0.--15. 1. "diseng_framegen1_SFifoMin,Shows the minimal fill level of the secondary channel pixel FIFO." line.long 0x4 "diseng_framegen1_FgSFifoMax,FrameGen Secondary FIFO Max Fill Register" hexmask.long.word 0x4 0.--15. 1. "diseng_framegen1_SFifoMax,Shows the maximal fill level of the secondary channel pixel FIFO." wgroup.long 0x3300C0++0x3 line.long 0x0 "diseng_framegen1_FgSFifoFillClr,FrameGen Secondary FIFO Fill Clear Register" bitfld.long 0x0 0. "diseng_framegen1_SFifoFillClr,Write for clearing register FgSFifoMin and FgSFifoMax." "0,1" rgroup.long 0x3300C4++0x13 line.long 0x0 "diseng_framegen1_FgSrEpD,FrameGen Skew Regulation ExtraPolation Debug Register" hexmask.long 0x0 0.--28. 1. "diseng_framegen1_EpVal,Calculated value for line skew extrapolation in blanking." line.long 0x4 "diseng_framegen1_FgSrFtD,FrameGen Skew Regulation Frame Total Debug Register" hexmask.long 0x4 0.--27. 1. "diseng_framegen1_FrTot,Measured value for frame total measured in display clock cycles." line.long 0x8 "diseng_framegen1_FgSrCSHTotal,FrameGen Skew Regulation External Sync HTotal Debug Register" hexmask.long 0x8 0.--31. 1. "diseng_framegen1_FrCSHTotal,Measured value for capture sync input htotal." line.long 0xC "diseng_framegen1_FgSrClockDiv,FrameGen Skew Regulation External PLL Clock divider" hexmask.long.tbyte 0xC 0.--19. 1. "diseng_framegen1_FrClockDiv,Measured value for PLL clock divider from clock measurement." line.long 0x10 "diseng_framegen1_FgSl,FrameGen Scanline Register" bitfld.long 0x10 31. "diseng_framegen1_VBlank,Indicates whether the current read scanline is in vertical blanking." "0,1" newline hexmask.long.word 0x10 0.--13. 1. "diseng_framegen1_ScanLine,Reads current scanline of framegen display timing." wgroup.long 0x340000++0x3 line.long 0x0 "diseng_sig1_LockUnlock,Register to change the protection status of this address block" hexmask.long 0x0 0.--31. 1. "diseng_sig1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x340004++0x3 line.long 0x0 "diseng_sig1_LockStatus,Protection status of this address block" bitfld.long 0x0 8. "diseng_sig1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed" "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_sig1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active" "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_sig1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)" "0: inactive,1: active" group.long 0x340008++0x17 line.long 0x0 "diseng_sig1_StaticControl,Global configuration" bitfld.long 0x0 4. "diseng_sig1_ShdLdSel,Source select for events that will load shadow registers into the active configuration" "0,1" newline bitfld.long 0x0 0. "diseng_sig1_ShdEn,Enables shadow registers for RWS type fields (0 = write through 1 = shadowed)" "0: write through,1: shadowed)" line.long 0x4 "diseng_sig1_ErrorThreshold,Set and reset thresholds applying to Window_Error and Cluster_Error interrupts and status bits" hexmask.long.byte 0x4 16.--23. 1. "diseng_sig1_ErrThresReset,Number of consecutive 'MATCH' frames before resetting respective Error/Error bit" newline hexmask.long.byte 0x4 0.--7. 1. "diseng_sig1_ErrThres,Number of 'ERROR' frames before generating error interrupt and asserting respective Error/Error status bit" line.long 0x8 "diseng_sig1_MatchThreshold,Set and reset thresholds applying to Match interrupt and status bits" hexmask.long.byte 0x8 16.--23. 1. "diseng_sig1_MatchThresReset,Number of consecutive 'ERROR' frames before resetting respective Match bit" newline hexmask.long.byte 0x8 0.--7. 1. "diseng_sig1_MatchThres,Number of 'MATCH' frames before generating match interrupt and asserting respective Match bit" line.long 0xC "diseng_sig1_PanicColor,Overlay color for evaluation windows in panic mode" hexmask.long.byte 0xC 24.--31. 1. "diseng_sig1_PanicRed,Red color component" newline hexmask.long.byte 0xC 16.--23. 1. "diseng_sig1_PanicGreen,Green color component" newline hexmask.long.byte 0xC 8.--15. 1. "diseng_sig1_PanicBlue,Blue color component" newline hexmask.long.byte 0xC 0.--7. 1. "diseng_sig1_PanicAlpha,Alpha mask bit" line.long 0x10 "diseng_sig1_ShadowLoad,Shadow load control register" hexmask.long.byte 0x10 0.--7. 1. "diseng_sig1_ShdLdReq,Shadow load request for each evaluation window (bit index = window index)" line.long 0x14 "diseng_sig1_ContinuousMode,Signature operation mode control" bitfld.long 0x14 0. "diseng_sig1_EnCont,EnCont = 0: disables continuous mode" "0: disables continuous mode,?" wgroup.long 0x340020++0x3 line.long 0x0 "diseng_sig1_SoftwareKick,Signature measurement trigger" bitfld.long 0x0 0. "diseng_sig1_Kick,ContinueMode." "0,1" group.long 0x340024++0x3 line.long 0x0 "diseng_sig1_SkipWindow,Enable skipping window feature." bitfld.long 0x0 0. "diseng_sig1_SkipWinEn,If skip window feature is enabled the pixels overlapping multiple windows will be computed for CRC and statistics only in the highest priority window." "0,1" rgroup.long 0x340028++0x3 line.long 0x0 "diseng_sig1_Status,Signature evaluation status" hexmask.long.byte 0x0 20.--23. 1. "diseng_sig1_Cluster_Match,Match status bits for all evaluation clusters (bit index = cluster index)" newline hexmask.long.byte 0x0 16.--19. 1. "diseng_sig1_Cluster_Error,Error status bits for all evaluation clusters (bit index = cluster index)" newline hexmask.long.byte 0x0 8.--15. 1. "diseng_sig1_Window_Error,Error status bits for all evaluation windows (bit index = window index)" newline bitfld.long 0x0 1. "diseng_sig1_SigValid,Measured signature values are valid" "0,1" newline bitfld.long 0x0 0. "diseng_sig1_SigState,Run state of the module" "0,1" group.long 0x34002C++0x1CF line.long 0x0 "diseng_sig1_Control_Window0,Window 0. Control settings" bitfld.long 0x0 24. "diseng_sig1_Sum_Window0,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x0 17. "diseng_sig1_GlobalPanic_Window0,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x0 16. "diseng_sig1_LocalPanic_Window0,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x0 10. "diseng_sig1_AlphaSel_Window0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x0 9. "diseng_sig1_AlphaInv_Window0,When enabled (value 1) the effect of AlphaMask (in enabled mode) is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x0 8. "diseng_sig1_AlphaMask_Window0,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x0 1. "diseng_sig1_CRC_Window0,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x0 0. "diseng_sig1_En_Window0,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x4 "diseng_sig1_UpperLeft_Window0,Window 0. Upper Left Coordinates" hexmask.long.word 0x4 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window0,Y coordinate" newline hexmask.long.word 0x4 0.--13. 1. "diseng_sig1_UpperLeft_X_Window0,X coordinate" line.long 0x8 "diseng_sig1_LowerRight_Window0,Window 0. Lower Right Coordinates" hexmask.long.word 0x8 16.--29. 1. "diseng_sig1_LowerRight_Y_Window0,Y coordinate" newline hexmask.long.word 0x8 0.--13. 1. "diseng_sig1_LowerRight_X_Window0,X coordinate" line.long 0xC "diseng_sig1_Ref_R_Window0,Window 0. Reference CRC Value of Red Channel" hexmask.long 0xC 0.--31. 1. "diseng_sig1_Ref_R_Window0,Reference value that is compared against measured CRC_R value" line.long 0x10 "diseng_sig1_Ref_G_Window0,Window 0. Reference CRC Value of Green Channel" hexmask.long 0x10 0.--31. 1. "diseng_sig1_Ref_G_Window0,Reference value that is compared against measured CRC_G value" line.long 0x14 "diseng_sig1_Ref_B_Window0,Window 0. Reference CRC Value of Blue Channel" hexmask.long 0x14 0.--31. 1. "diseng_sig1_Ref_B_Window0,Reference value that is compared against measured CRC_B value" line.long 0x18 "diseng_sig1_Stats0_Window0,Controls of Statistics Block 0. Window 0" bitfld.long 0x18 2. "diseng_sig1_AlphaSel_S0_Win0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x18 1. "diseng_sig1_AlphaInv_S0_Win0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x18 0. "diseng_sig1_AlphaMask_S0_Win0,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x1C "diseng_sig1_Stats1_Window0,Controls of Statistics Block 0. Window 0" bitfld.long 0x1C 2. "diseng_sig1_AlphaSel_S1_Win0,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x1C 1. "diseng_sig1_AlphaInv_S1_Win0,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x1C 0. "diseng_sig1_AlphaMask_S1_Win0,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x20 "diseng_sig1_Min_RedSum_Window0,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0x20 0.--31. 1. "diseng_sig1_Min_RSum_Win0,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0x24 "diseng_sig1_Min_GreenSum_Window0,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0x24 0.--31. 1. "diseng_sig1_Min_GSum_Win0,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0x28 "diseng_sig1_Min_BlueSum_Window0,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0x28 0.--31. 1. "diseng_sig1_Min_BSum_Win0,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0x2C "diseng_sig1_Min_LumSum_Window0,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0x2C 0.--31. 1. "diseng_sig1_Min_LSum_Win0,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0x30 "diseng_sig1_Max_RedSum_Window0,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0x30 0.--31. 1. "diseng_sig1_Max_RSum_Win0,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0x34 "diseng_sig1_Max_GreenSum_Window0,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0x34 0.--31. 1. "diseng_sig1_Max_GSum_Win0,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0x38 "diseng_sig1_Max_BlueSum_Window0,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0x38 0.--31. 1. "diseng_sig1_Max_BSum_Win0,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0x3C "diseng_sig1_Max_LumSum_Window0,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0x3C 0.--31. 1. "diseng_sig1_Max_LSum_Win0,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x40 "diseng_sig1_Control_Window1,Window 1. Control settings" bitfld.long 0x40 24. "diseng_sig1_Sum_Window1,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x40 17. "diseng_sig1_GlobalPanic_Window1,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x40 16. "diseng_sig1_LocalPanic_Window1,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x40 10. "diseng_sig1_AlphaSel_Window1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x40 9. "diseng_sig1_AlphaInv_Window1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x40 8. "diseng_sig1_AlphaMask_Window1,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x40 1. "diseng_sig1_CRC_Window1,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x40 0. "diseng_sig1_En_Window1,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x44 "diseng_sig1_UpperLeft_Window1,Window 1. Upper Left Coordinates" hexmask.long.word 0x44 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window1,Y coordinate" newline hexmask.long.word 0x44 0.--13. 1. "diseng_sig1_UpperLeft_X_Window1,X coordinate" line.long 0x48 "diseng_sig1_LowerRight_Window1,Window 1. Lower Right Coordinates" hexmask.long.word 0x48 16.--29. 1. "diseng_sig1_LowerRight_Y_Window1,Y coordinate" newline hexmask.long.word 0x48 0.--13. 1. "diseng_sig1_LowerRight_X_Window1,X coordinate" line.long 0x4C "diseng_sig1_Ref_R_Window1,Window 1. Reference CRC Value of Red Channel" hexmask.long 0x4C 0.--31. 1. "diseng_sig1_Ref_R_Window1,Reference value that is compared against measured CRC_R value" line.long 0x50 "diseng_sig1_Ref_G_Window1,Window 1. Reference CRC Value of Green Channel" hexmask.long 0x50 0.--31. 1. "diseng_sig1_Ref_G_Window1,Reference value that is compared against measured CRC_G value" line.long 0x54 "diseng_sig1_Ref_B_Window1,Window 1. Reference CRC Value of Blue Channel" hexmask.long 0x54 0.--31. 1. "diseng_sig1_Ref_B_Window1,Reference value that is compared against measured CRC_B value" line.long 0x58 "diseng_sig1_Stats0_Window1,Controls of Statistics Block 0. Window 1" bitfld.long 0x58 2. "diseng_sig1_AlphaSel_S0_Win1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x58 1. "diseng_sig1_AlphaInv_S0_Win1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x58 0. "diseng_sig1_AlphaMask_S0_Win1,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x5C "diseng_sig1_Stats1_Window1,Controls of Statistics Block 0. Window 1" bitfld.long 0x5C 2. "diseng_sig1_AlphaSel_S1_Win1,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x5C 1. "diseng_sig1_AlphaInv_S1_Win1,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x5C 0. "diseng_sig1_AlphaMask_S1_Win1,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x60 "diseng_sig1_Min_RedSum_Window1,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0x60 0.--31. 1. "diseng_sig1_Min_RSum_Win1,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0x64 "diseng_sig1_Min_GreenSum_Window1,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0x64 0.--31. 1. "diseng_sig1_Min_GSum_Win1,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0x68 "diseng_sig1_Min_BlueSum_Window1,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0x68 0.--31. 1. "diseng_sig1_Min_BSum_Win1,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0x6C "diseng_sig1_Min_LumSum_Window1,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0x6C 0.--31. 1. "diseng_sig1_Min_LSum_Win1,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0x70 "diseng_sig1_Max_RedSum_Window1,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0x70 0.--31. 1. "diseng_sig1_Max_RSum_Win1,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0x74 "diseng_sig1_Max_GreenSum_Window1,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0x74 0.--31. 1. "diseng_sig1_Max_GSum_Win1,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0x78 "diseng_sig1_Max_BlueSum_Window1,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0x78 0.--31. 1. "diseng_sig1_Max_BSum_Win1,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0x7C "diseng_sig1_Max_LumSum_Window1,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0x7C 0.--31. 1. "diseng_sig1_Max_LSum_Win1,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x80 "diseng_sig1_Control_Window2,Window 2. Control settings" bitfld.long 0x80 24. "diseng_sig1_Sum_Window2,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0x80 17. "diseng_sig1_GlobalPanic_Window2,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x80 16. "diseng_sig1_LocalPanic_Window2,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x80 10. "diseng_sig1_AlphaSel_Window2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x80 9. "diseng_sig1_AlphaInv_Window2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x80 8. "diseng_sig1_AlphaMask_Window2,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x80 1. "diseng_sig1_CRC_Window2,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x80 0. "diseng_sig1_En_Window2,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x84 "diseng_sig1_UpperLeft_Window2,Window 2. Upper Left Coordinates" hexmask.long.word 0x84 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window2,Y coordinate" newline hexmask.long.word 0x84 0.--13. 1. "diseng_sig1_UpperLeft_X_Window2,X coordinate" line.long 0x88 "diseng_sig1_LowerRight_Window2,Window 2. Lower Right Coordinates" hexmask.long.word 0x88 16.--29. 1. "diseng_sig1_LowerRight_Y_Window2,Y coordinate" newline hexmask.long.word 0x88 0.--13. 1. "diseng_sig1_LowerRight_X_Window2,X coordinate" line.long 0x8C "diseng_sig1_Ref_R_Window2,Window 2. Reference CRC Value of Red Channel" hexmask.long 0x8C 0.--31. 1. "diseng_sig1_Ref_R_Window2,Reference value that is compared against measured CRC_R value" line.long 0x90 "diseng_sig1_Ref_G_Window2,Window 2. Reference CRC Value of Green Channel" hexmask.long 0x90 0.--31. 1. "diseng_sig1_Ref_G_Window2,Reference value that is compared against measured CRC_G value" line.long 0x94 "diseng_sig1_Ref_B_Window2,Window 2. Reference CRC Value of Blue Channel" hexmask.long 0x94 0.--31. 1. "diseng_sig1_Ref_B_Window2,Reference value that is compared against measured CRC_B value" line.long 0x98 "diseng_sig1_Stats0_Window2,Controls of Statistics Block 0. Window 2" bitfld.long 0x98 2. "diseng_sig1_AlphaSel_S0_Win2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x98 1. "diseng_sig1_AlphaInv_S0_Win2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x98 0. "diseng_sig1_AlphaMask_S0_Win2,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0x9C "diseng_sig1_Stats1_Window2,Controls of Statistics Block 0. Window 2" bitfld.long 0x9C 2. "diseng_sig1_AlphaSel_S1_Win2,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x9C 1. "diseng_sig1_AlphaInv_S1_Win2,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x9C 0. "diseng_sig1_AlphaMask_S1_Win2,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xA0 "diseng_sig1_Min_RedSum_Window2,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0xA0 0.--31. 1. "diseng_sig1_Min_RSum_Win2,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0xA4 "diseng_sig1_Min_GreenSum_Window2,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0xA4 0.--31. 1. "diseng_sig1_Min_GSum_Win2,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0xA8 "diseng_sig1_Min_BlueSum_Window2,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0xA8 0.--31. 1. "diseng_sig1_Min_BSum_Win2,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0xAC "diseng_sig1_Min_LumSum_Window2,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0xAC 0.--31. 1. "diseng_sig1_Min_LSum_Win2,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0xB0 "diseng_sig1_Max_RedSum_Window2,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0xB0 0.--31. 1. "diseng_sig1_Max_RSum_Win2,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0xB4 "diseng_sig1_Max_GreenSum_Window2,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0xB4 0.--31. 1. "diseng_sig1_Max_GSum_Win2,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0xB8 "diseng_sig1_Max_BlueSum_Window2,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0xB8 0.--31. 1. "diseng_sig1_Max_BSum_Win2,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0xBC "diseng_sig1_Max_LumSum_Window2,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0xBC 0.--31. 1. "diseng_sig1_Max_LSum_Win2,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0xC0 "diseng_sig1_Control_Window3,Window 3. Control settings" bitfld.long 0xC0 24. "diseng_sig1_Sum_Window3,When enabled (value 1) each of the measured sum of stats0 (red blue green luminance) is checked against the minimum and maximum threshold values." "0,1" newline bitfld.long 0xC0 17. "diseng_sig1_GlobalPanic_Window3,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0xC0 16. "diseng_sig1_LocalPanic_Window3,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0xC0 10. "diseng_sig1_AlphaSel_Window3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xC0 9. "diseng_sig1_AlphaInv_Window3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xC0 8. "diseng_sig1_AlphaMask_Window3,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0xC0 1. "diseng_sig1_CRC_Window3,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0xC0 0. "diseng_sig1_En_Window3,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0xC4 "diseng_sig1_UpperLeft_Window3,Window 3. Upper Left Coordinates" hexmask.long.word 0xC4 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window3,Y coordinate" newline hexmask.long.word 0xC4 0.--13. 1. "diseng_sig1_UpperLeft_X_Window3,X coordinate" line.long 0xC8 "diseng_sig1_LowerRight_Window3,Window 3. Lower Right Coordinates" hexmask.long.word 0xC8 16.--29. 1. "diseng_sig1_LowerRight_Y_Window3,Y coordinate" newline hexmask.long.word 0xC8 0.--13. 1. "diseng_sig1_LowerRight_X_Window3,X coordinate" line.long 0xCC "diseng_sig1_Ref_R_Window3,Window 3. Reference CRC Value of Red Channel" hexmask.long 0xCC 0.--31. 1. "diseng_sig1_Ref_R_Window3,Reference value that is compared against measured CRC_R value" line.long 0xD0 "diseng_sig1_Ref_G_Window3,Window 3. Reference CRC Value of Green Channel" hexmask.long 0xD0 0.--31. 1. "diseng_sig1_Ref_G_Window3,Reference value that is compared against measured CRC_G value" line.long 0xD4 "diseng_sig1_Ref_B_Window3,Window 3. Reference CRC Value of Blue Channel" hexmask.long 0xD4 0.--31. 1. "diseng_sig1_Ref_B_Window3,Reference value that is compared against measured CRC_B value" line.long 0xD8 "diseng_sig1_Stats0_Window3,Controls of Statistics Block 0. Window 3" bitfld.long 0xD8 2. "diseng_sig1_AlphaSel_S0_Win3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xD8 1. "diseng_sig1_AlphaInv_S0_Win3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xD8 0. "diseng_sig1_AlphaMask_S0_Win3,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xDC "diseng_sig1_Stats1_Window3,Controls of Statistics Block 0. Window 3" bitfld.long 0xDC 2. "diseng_sig1_AlphaSel_S1_Win3,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0xDC 1. "diseng_sig1_AlphaInv_S1_Win3,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0xDC 0. "diseng_sig1_AlphaMask_S1_Win3,When disabled (value 0) all incoming pixels contribute to statistics computation irrespective of alpha bit and AlphaInv" "0,1" line.long 0xE0 "diseng_sig1_Min_RedSum_Window3,Minimum sum-threshold for red component of the pixels in a window." hexmask.long 0xE0 0.--31. 1. "diseng_sig1_Min_RSum_Win3,If sum of red component of pixels inside a window is less than this value an error is detected." line.long 0xE4 "diseng_sig1_Min_GreenSum_Window3,Minimum sum-threshold for green component of the pixels in a window." hexmask.long 0xE4 0.--31. 1. "diseng_sig1_Min_GSum_Win3,If sum of green component of pixels inside a window is less than this value an error is detected." line.long 0xE8 "diseng_sig1_Min_BlueSum_Window3,Minimum sum-threshold for blue component of the pixels in a window." hexmask.long 0xE8 0.--31. 1. "diseng_sig1_Min_BSum_Win3,If sum of blue component of pixels inside a window is less than this value an error is detected." line.long 0xEC "diseng_sig1_Min_LumSum_Window3,Minimum sum-threshold for luminance of the pixels in a window." hexmask.long 0xEC 0.--31. 1. "diseng_sig1_Min_LSum_Win3,If sum of luminance of pixels inside a window is less than this value an error is detected." line.long 0xF0 "diseng_sig1_Max_RedSum_Window3,Maximum sum-threshold for red component of the pixels in a window." hexmask.long 0xF0 0.--31. 1. "diseng_sig1_Max_RSum_Win3,If sum of red component of pixels inside a window is greater than this value an error is detected." line.long 0xF4 "diseng_sig1_Max_GreenSum_Window3,Maximum sum-threshold for green component of the pixels in a window." hexmask.long 0xF4 0.--31. 1. "diseng_sig1_Max_GSum_Win3,If sum of green component of pixels inside a window is greater than this value an error is detected." line.long 0xF8 "diseng_sig1_Max_BlueSum_Window3,Maximum sum-threshold for blue component of the pixels in a window." hexmask.long 0xF8 0.--31. 1. "diseng_sig1_Max_BSum_Win3,If sum of blue component of pixels inside a window is greater than this value an error is detected." line.long 0xFC "diseng_sig1_Max_LumSum_Window3,Maximum sum-threshold for luminance of the pixels in a window." hexmask.long 0xFC 0.--31. 1. "diseng_sig1_Max_LSum_Win3,If sum of luminance of pixels inside a window is greater than this value an error is detected." line.long 0x100 "diseng_sig1_Control_Window4,Window 4. Control settings" bitfld.long 0x100 17. "diseng_sig1_GlobalPanic_Window4,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x100 16. "diseng_sig1_LocalPanic_Window4,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x100 10. "diseng_sig1_AlphaSel_Window4,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x100 9. "diseng_sig1_AlphaInv_Window4,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x100 8. "diseng_sig1_AlphaMask_Window4,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x100 1. "diseng_sig1_CRC_Window4,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x100 0. "diseng_sig1_En_Window4,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x104 "diseng_sig1_UpperLeft_Window4,Window 4. Upper Left Coordinates" hexmask.long.word 0x104 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window4,Y coordinate" newline hexmask.long.word 0x104 0.--13. 1. "diseng_sig1_UpperLeft_X_Window4,X coordinate" line.long 0x108 "diseng_sig1_LowerRight_Window4,Window 4. Lower Right Coordinates" hexmask.long.word 0x108 16.--29. 1. "diseng_sig1_LowerRight_Y_Window4,Y coordinate" newline hexmask.long.word 0x108 0.--13. 1. "diseng_sig1_LowerRight_X_Window4,X coordinate" line.long 0x10C "diseng_sig1_Ref_R_Window4,Window 4. Reference CRC Value of Red Channel" hexmask.long 0x10C 0.--31. 1. "diseng_sig1_Ref_R_Window4,Reference value that is compared against measured CRC_R value" line.long 0x110 "diseng_sig1_Ref_G_Window4,Window 4. Reference CRC Value of Green Channel" hexmask.long 0x110 0.--31. 1. "diseng_sig1_Ref_G_Window4,Reference value that is compared against measured CRC_G value" line.long 0x114 "diseng_sig1_Ref_B_Window4,Window 4. Reference CRC Value of Blue Channel" hexmask.long 0x114 0.--31. 1. "diseng_sig1_Ref_B_Window4,Reference value that is compared against measured CRC_B value" line.long 0x118 "diseng_sig1_Control_Window5,Window 5. Control settings" bitfld.long 0x118 17. "diseng_sig1_GlobalPanic_Window5,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x118 16. "diseng_sig1_LocalPanic_Window5,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x118 10. "diseng_sig1_AlphaSel_Window5,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x118 9. "diseng_sig1_AlphaInv_Window5,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x118 8. "diseng_sig1_AlphaMask_Window5,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x118 1. "diseng_sig1_CRC_Window5,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x118 0. "diseng_sig1_En_Window5,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x11C "diseng_sig1_UpperLeft_Window5,Window 5. Upper Left Coordinates" hexmask.long.word 0x11C 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window5,Y coordinate" newline hexmask.long.word 0x11C 0.--13. 1. "diseng_sig1_UpperLeft_X_Window5,X coordinate" line.long 0x120 "diseng_sig1_LowerRight_Window5,Window 5. Lower Right Coordinates" hexmask.long.word 0x120 16.--29. 1. "diseng_sig1_LowerRight_Y_Window5,Y coordinate" newline hexmask.long.word 0x120 0.--13. 1. "diseng_sig1_LowerRight_X_Window5,X coordinate" line.long 0x124 "diseng_sig1_Ref_R_Window5,Window 5. Reference CRC Value of Red Channel" hexmask.long 0x124 0.--31. 1. "diseng_sig1_Ref_R_Window5,Reference value that is compared against measured CRC_R value" line.long 0x128 "diseng_sig1_Ref_G_Window5,Window 5. Reference CRC Value of Green Channel" hexmask.long 0x128 0.--31. 1. "diseng_sig1_Ref_G_Window5,Reference value that is compared against measured CRC_G value" line.long 0x12C "diseng_sig1_Ref_B_Window5,Window 5. Reference CRC Value of Blue Channel" hexmask.long 0x12C 0.--31. 1. "diseng_sig1_Ref_B_Window5,Reference value that is compared against measured CRC_B value" line.long 0x130 "diseng_sig1_Control_Window6,Window 6. Control settings" bitfld.long 0x130 17. "diseng_sig1_GlobalPanic_Window6,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x130 16. "diseng_sig1_LocalPanic_Window6,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x130 10. "diseng_sig1_AlphaSel_Window6,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x130 9. "diseng_sig1_AlphaInv_Window6,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x130 8. "diseng_sig1_AlphaMask_Window6,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x130 1. "diseng_sig1_CRC_Window6,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x130 0. "diseng_sig1_En_Window6,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x134 "diseng_sig1_UpperLeft_Window6,Window 6. Upper Left Coordinates" hexmask.long.word 0x134 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window6,Y coordinate" newline hexmask.long.word 0x134 0.--13. 1. "diseng_sig1_UpperLeft_X_Window6,X coordinate" line.long 0x138 "diseng_sig1_LowerRight_Window6,Window 6. Lower Right Coordinates" hexmask.long.word 0x138 16.--29. 1. "diseng_sig1_LowerRight_Y_Window6,Y coordinate" newline hexmask.long.word 0x138 0.--13. 1. "diseng_sig1_LowerRight_X_Window6,X coordinate" line.long 0x13C "diseng_sig1_Ref_R_Window6,Window 6. Reference CRC Value of Red Channel" hexmask.long 0x13C 0.--31. 1. "diseng_sig1_Ref_R_Window6,Reference value that is compared against measured CRC_R value" line.long 0x140 "diseng_sig1_Ref_G_Window6,Window 6. Reference CRC Value of Green Channel" hexmask.long 0x140 0.--31. 1. "diseng_sig1_Ref_G_Window6,Reference value that is compared against measured CRC_G value" line.long 0x144 "diseng_sig1_Ref_B_Window6,Window 6. Reference CRC Value of Blue Channel" hexmask.long 0x144 0.--31. 1. "diseng_sig1_Ref_B_Window6,Reference value that is compared against measured CRC_B value" line.long 0x148 "diseng_sig1_Control_Window7,Window 7. Control settings" bitfld.long 0x148 17. "diseng_sig1_GlobalPanic_Window7,When enabled (value 1) the error status of this window (Window_Error) will activate the panic mode of the display stream's Frame Generator which can switch to another display mode in response" "0,1" newline bitfld.long 0x148 16. "diseng_sig1_LocalPanic_Window7,When enabled (value 1) the error status this window (Window_Error) will replace all pixels inside the window by a constant color on the display." "0,1" newline bitfld.long 0x148 10. "diseng_sig1_AlphaSel_Window7,If AlphaSel==1 alpha_in[1] is used for processing else alpha_in[0]." "0,1" newline bitfld.long 0x148 9. "diseng_sig1_AlphaInv_Window7,When enabled (value 1) the effect of AlphaMask is inverted (pixels with alpha bit = 1 are ignored then)" "0,1" newline bitfld.long 0x148 8. "diseng_sig1_AlphaMask_Window7,When disabled (value 0) all incoming pixels contribute to signature computation irrespective of alpha bit and AlphaInv" "0,1" newline bitfld.long 0x148 1. "diseng_sig1_CRC_Window7,When enabled (value 1) the measured signature is checked against a reference value (Ref)" "0,1" newline bitfld.long 0x148 0. "diseng_sig1_En_Window7,When enabled (value 1) a CRC signature is computed for all pixels inside this evaluation window (CRC)" "0,1" line.long 0x14C "diseng_sig1_UpperLeft_Window7,Window 7. Upper Left Coordinates" hexmask.long.word 0x14C 16.--29. 1. "diseng_sig1_UpperLeft_Y_Window7,Y coordinate" newline hexmask.long.word 0x14C 0.--13. 1. "diseng_sig1_UpperLeft_X_Window7,X coordinate" line.long 0x150 "diseng_sig1_LowerRight_Window7,Window 7. Lower Right Coordinates" hexmask.long.word 0x150 16.--29. 1. "diseng_sig1_LowerRight_Y_Window7,Y coordinate" newline hexmask.long.word 0x150 0.--13. 1. "diseng_sig1_LowerRight_X_Window7,X coordinate" line.long 0x154 "diseng_sig1_Ref_R_Window7,Window 7. Reference CRC Value of Red Channel" hexmask.long 0x154 0.--31. 1. "diseng_sig1_Ref_R_Window7,Reference value that is compared against measured CRC_R value" line.long 0x158 "diseng_sig1_Ref_G_Window7,Window 7. Reference CRC Value of Green Channel" hexmask.long 0x158 0.--31. 1. "diseng_sig1_Ref_G_Window7,Reference value that is compared against measured CRC_G value" line.long 0x15C "diseng_sig1_Ref_B_Window7,Window 7. Reference CRC Value of Blue Channel" hexmask.long 0x15C 0.--31. 1. "diseng_sig1_Ref_B_Window7,Reference value that is compared against measured CRC_B value" line.long 0x160 "diseng_sig1_Control_Cluster0,Cluster 0. Control settings" hexmask.long.byte 0x160 24.--31. 1. "diseng_sig1_MaskRed_Cluster0,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x160 16.--23. 1. "diseng_sig1_MaskGreen_Cluster0,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x160 8.--15. 1. "diseng_sig1_MaskBlue_Cluster0,Bit mask applied to blue channel before sampling" newline bitfld.long 0x160 7. "diseng_sig1_Pix3_En_Cluster0,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x160 6. "diseng_sig1_Pix2_En_Cluster0,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x160 5. "diseng_sig1_Pix1_En_Cluster0,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x160 4. "diseng_sig1_Pix0_En_Cluster0,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x160 0. "diseng_sig1_En_Cluster0,Cluster 0 enable" "0,1" line.long 0x164 "diseng_sig1_Pix0_Cluster0,Cluster 0. Coordinate of Pixel 0" hexmask.long.word 0x164 16.--29. 1. "diseng_sig1_Y0_Cluster0,Vertical coordinate of pixel 0" newline hexmask.long.word 0x164 0.--13. 1. "diseng_sig1_X0_Cluster0,Horizontal coordinate of pixel 0" line.long 0x168 "diseng_sig1_Pix1_Cluster0,Cluster 0. Coordinate of Pixel 1" hexmask.long.word 0x168 16.--29. 1. "diseng_sig1_Y1_Cluster0,Vertical coordinate of pixel 1" newline hexmask.long.word 0x168 0.--13. 1. "diseng_sig1_X1_Cluster0,Horizontal coordinate of pixel 1" line.long 0x16C "diseng_sig1_Pix2_Cluster0,Cluster 0. Coordinate of Pixel 2" hexmask.long.word 0x16C 16.--29. 1. "diseng_sig1_Y2_Cluster0,Vertical coordinate of pixel 2" newline hexmask.long.word 0x16C 0.--13. 1. "diseng_sig1_X2_Cluster0,Horizontal coordinate of pixel 2" line.long 0x170 "diseng_sig1_Pix3_Cluster0,Cluster 0. Coordinate of Pixel 3" hexmask.long.word 0x170 16.--29. 1. "diseng_sig1_Y3_Cluster0,Vertical coordinate of pixel 3" newline hexmask.long.word 0x170 0.--13. 1. "diseng_sig1_X3_Cluster0,Horizontal coordinate of pixel 3" line.long 0x174 "diseng_sig1_Ref0_Cluster0,Cluster 0. Reference Vector 0" hexmask.long.tbyte 0x174 0.--23. 1. "diseng_sig1_Ref0_Cluster0,Reference value." line.long 0x178 "diseng_sig1_Ref1_Cluster0,Cluster 0. Reference Vector 1" hexmask.long.tbyte 0x178 0.--23. 1. "diseng_sig1_Ref1_Cluster0,Reference value." line.long 0x17C "diseng_sig1_Control_Cluster1,Cluster 1. Control settings" hexmask.long.byte 0x17C 24.--31. 1. "diseng_sig1_MaskRed_Cluster1,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x17C 16.--23. 1. "diseng_sig1_MaskGreen_Cluster1,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x17C 8.--15. 1. "diseng_sig1_MaskBlue_Cluster1,Bit mask applied to blue channel before sampling" newline bitfld.long 0x17C 7. "diseng_sig1_Pix3_En_Cluster1,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x17C 6. "diseng_sig1_Pix2_En_Cluster1,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x17C 5. "diseng_sig1_Pix1_En_Cluster1,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x17C 4. "diseng_sig1_Pix0_En_Cluster1,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x17C 0. "diseng_sig1_En_Cluster1,Cluster 1 enable" "0,1" line.long 0x180 "diseng_sig1_Pix0_Cluster1,Cluster 1. Coordinate of Pixel 0" hexmask.long.word 0x180 16.--29. 1. "diseng_sig1_Y0_Cluster1,Vertical coordinate of pixel 0" newline hexmask.long.word 0x180 0.--13. 1. "diseng_sig1_X0_Cluster1,Horizontal coordinate of pixel 0" line.long 0x184 "diseng_sig1_Pix1_Cluster1,Cluster 1. Coordinate of Pixel 1" hexmask.long.word 0x184 16.--29. 1. "diseng_sig1_Y1_Cluster1,Vertical coordinate of pixel 1" newline hexmask.long.word 0x184 0.--13. 1. "diseng_sig1_X1_Cluster1,Horizontal coordinate of pixel 1" line.long 0x188 "diseng_sig1_Pix2_Cluster1,Cluster 1. Coordinate of Pixel 2" hexmask.long.word 0x188 16.--29. 1. "diseng_sig1_Y2_Cluster1,Vertical coordinate of pixel 2" newline hexmask.long.word 0x188 0.--13. 1. "diseng_sig1_X2_Cluster1,Horizontal coordinate of pixel 2" line.long 0x18C "diseng_sig1_Pix3_Cluster1,Cluster 1. Coordinate of Pixel 3" hexmask.long.word 0x18C 16.--29. 1. "diseng_sig1_Y3_Cluster1,Vertical coordinate of pixel 3" newline hexmask.long.word 0x18C 0.--13. 1. "diseng_sig1_X3_Cluster1,Horizontal coordinate of pixel 3" line.long 0x190 "diseng_sig1_Ref0_Cluster1,Cluster 1. Reference Vector 0" hexmask.long.tbyte 0x190 0.--23. 1. "diseng_sig1_Ref0_Cluster1,Reference value." line.long 0x194 "diseng_sig1_Ref1_Cluster1,Cluster 1. Reference Vector 1" hexmask.long.tbyte 0x194 0.--23. 1. "diseng_sig1_Ref1_Cluster1,Reference value." line.long 0x198 "diseng_sig1_Control_Cluster2,Cluster 2. Control settings" hexmask.long.byte 0x198 24.--31. 1. "diseng_sig1_MaskRed_Cluster2,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x198 16.--23. 1. "diseng_sig1_MaskGreen_Cluster2,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x198 8.--15. 1. "diseng_sig1_MaskBlue_Cluster2,Bit mask applied to blue channel before sampling" newline bitfld.long 0x198 7. "diseng_sig1_Pix3_En_Cluster2,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x198 6. "diseng_sig1_Pix2_En_Cluster2,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x198 5. "diseng_sig1_Pix1_En_Cluster2,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x198 4. "diseng_sig1_Pix0_En_Cluster2,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x198 0. "diseng_sig1_En_Cluster2,Cluster 2 enable" "0,1" line.long 0x19C "diseng_sig1_Pix0_Cluster2,Cluster 2. Coordinate of Pixel 0" hexmask.long.word 0x19C 16.--29. 1. "diseng_sig1_Y0_Cluster2,Vertical coordinate of pixel 0" newline hexmask.long.word 0x19C 0.--13. 1. "diseng_sig1_X0_Cluster2,Horizontal coordinate of pixel 0" line.long 0x1A0 "diseng_sig1_Pix1_Cluster2,Cluster 2. Coordinate of Pixel 1" hexmask.long.word 0x1A0 16.--29. 1. "diseng_sig1_Y1_Cluster2,Vertical coordinate of pixel 1" newline hexmask.long.word 0x1A0 0.--13. 1. "diseng_sig1_X1_Cluster2,Horizontal coordinate of pixel 1" line.long 0x1A4 "diseng_sig1_Pix2_Cluster2,Cluster 2. Coordinate of Pixel 2" hexmask.long.word 0x1A4 16.--29. 1. "diseng_sig1_Y2_Cluster2,Vertical coordinate of pixel 2" newline hexmask.long.word 0x1A4 0.--13. 1. "diseng_sig1_X2_Cluster2,Horizontal coordinate of pixel 2" line.long 0x1A8 "diseng_sig1_Pix3_Cluster2,Cluster 2. Coordinate of Pixel 3" hexmask.long.word 0x1A8 16.--29. 1. "diseng_sig1_Y3_Cluster2,Vertical coordinate of pixel 3" newline hexmask.long.word 0x1A8 0.--13. 1. "diseng_sig1_X3_Cluster2,Horizontal coordinate of pixel 3" line.long 0x1AC "diseng_sig1_Ref0_Cluster2,Cluster 2. Reference Vector 0" hexmask.long.tbyte 0x1AC 0.--23. 1. "diseng_sig1_Ref0_Cluster2,Reference value." line.long 0x1B0 "diseng_sig1_Ref1_Cluster2,Cluster 2. Reference Vector 1" hexmask.long.tbyte 0x1B0 0.--23. 1. "diseng_sig1_Ref1_Cluster2,Reference value." line.long 0x1B4 "diseng_sig1_Control_Cluster3,Cluster 3. Control settings" hexmask.long.byte 0x1B4 24.--31. 1. "diseng_sig1_MaskRed_Cluster3,Bit mask applied to red channel before sampling" newline hexmask.long.byte 0x1B4 16.--23. 1. "diseng_sig1_MaskGreen_Cluster3,Bit mask applied to green channel before sampling" newline hexmask.long.byte 0x1B4 8.--15. 1. "diseng_sig1_MaskBlue_Cluster3,Bit mask applied to blue channel before sampling" newline bitfld.long 0x1B4 7. "diseng_sig1_Pix3_En_Cluster3,Enables evaluation of pixel 3 having coordinates defined in register Pix3." "0,1" newline bitfld.long 0x1B4 6. "diseng_sig1_Pix2_En_Cluster3,Enables evaluation of pixel 2 having coordinates defined in register Pix2." "0,1" newline bitfld.long 0x1B4 5. "diseng_sig1_Pix1_En_Cluster3,Enables evaluation of pixel 1 having coordinates defined in register Pix1." "0,1" newline bitfld.long 0x1B4 4. "diseng_sig1_Pix0_En_Cluster3,Enables evaluation of pixel 0 having coordinates defined in register Pix0." "0,1" newline bitfld.long 0x1B4 0. "diseng_sig1_En_Cluster3,Cluster 3 enable" "0,1" line.long 0x1B8 "diseng_sig1_Pix0_Cluster3,Cluster 3. Coordinate of Pixel 0" hexmask.long.word 0x1B8 16.--29. 1. "diseng_sig1_Y0_Cluster3,Vertical coordinate of pixel 0" newline hexmask.long.word 0x1B8 0.--13. 1. "diseng_sig1_X0_Cluster3,Horizontal coordinate of pixel 0" line.long 0x1BC "diseng_sig1_Pix1_Cluster3,Cluster 3. Coordinate of Pixel 1" hexmask.long.word 0x1BC 16.--29. 1. "diseng_sig1_Y1_Cluster3,Vertical coordinate of pixel 1" newline hexmask.long.word 0x1BC 0.--13. 1. "diseng_sig1_X1_Cluster3,Horizontal coordinate of pixel 1" line.long 0x1C0 "diseng_sig1_Pix2_Cluster3,Cluster 3. Coordinate of Pixel 2" hexmask.long.word 0x1C0 16.--29. 1. "diseng_sig1_Y2_Cluster3,Vertical coordinate of pixel 2" newline hexmask.long.word 0x1C0 0.--13. 1. "diseng_sig1_X2_Cluster3,Horizontal coordinate of pixel 2" line.long 0x1C4 "diseng_sig1_Pix3_Cluster3,Cluster 3. Coordinate of Pixel 3" hexmask.long.word 0x1C4 16.--29. 1. "diseng_sig1_Y3_Cluster3,Vertical coordinate of pixel 3" newline hexmask.long.word 0x1C4 0.--13. 1. "diseng_sig1_X3_Cluster3,Horizontal coordinate of pixel 3" line.long 0x1C8 "diseng_sig1_Ref0_Cluster3,Cluster 3. Reference Vector 0" hexmask.long.tbyte 0x1C8 0.--23. 1. "diseng_sig1_Ref0_Cluster3,Reference value." line.long 0x1CC "diseng_sig1_Ref1_Cluster3,Cluster 3. Reference Vector 1" hexmask.long.tbyte 0x1CC 0.--23. 1. "diseng_sig1_Ref1_Cluster3,Reference value." rgroup.long 0x340400++0x18F line.long 0x0 "diseng_sig1_CRC_R_Window0,Window 0. Measured CRC Value of Red Channel" hexmask.long 0x0 0.--31. 1. "diseng_sig1_CRC_R_Window0,CRC value from red channel" line.long 0x4 "diseng_sig1_CRC_G_Window0,Window 0. Measured CRC Value of Green Channel" hexmask.long 0x4 0.--31. 1. "diseng_sig1_CRC_G_Window0,CRC value from green channel" line.long 0x8 "diseng_sig1_CRC_B_Window0,Window 0. Measured CRC Value of Blue Channel" hexmask.long 0x8 0.--31. 1. "diseng_sig1_CRC_B_Window0,CRC value from blue channel" line.long 0xC "diseng_sig1_CRC_R_Window1,Window 1. Measured CRC Value of Red Channel" hexmask.long 0xC 0.--31. 1. "diseng_sig1_CRC_R_Window1,CRC value from red channel" line.long 0x10 "diseng_sig1_CRC_G_Window1,Window 1. Measured CRC Value of Green Channel" hexmask.long 0x10 0.--31. 1. "diseng_sig1_CRC_G_Window1,CRC value from green channel" line.long 0x14 "diseng_sig1_CRC_B_Window1,Window 1. Measured CRC Value of Blue Channel" hexmask.long 0x14 0.--31. 1. "diseng_sig1_CRC_B_Window1,CRC value from blue channel" line.long 0x18 "diseng_sig1_CRC_R_Window2,Window 2. Measured CRC Value of Red Channel" hexmask.long 0x18 0.--31. 1. "diseng_sig1_CRC_R_Window2,CRC value from red channel" line.long 0x1C "diseng_sig1_CRC_G_Window2,Window 2. Measured CRC Value of Green Channel" hexmask.long 0x1C 0.--31. 1. "diseng_sig1_CRC_G_Window2,CRC value from green channel" line.long 0x20 "diseng_sig1_CRC_B_Window2,Window 2. Measured CRC Value of Blue Channel" hexmask.long 0x20 0.--31. 1. "diseng_sig1_CRC_B_Window2,CRC value from blue channel" line.long 0x24 "diseng_sig1_CRC_R_Window3,Window 3. Measured CRC Value of Red Channel" hexmask.long 0x24 0.--31. 1. "diseng_sig1_CRC_R_Window3,CRC value from red channel" line.long 0x28 "diseng_sig1_CRC_G_Window3,Window 3. Measured CRC Value of Green Channel" hexmask.long 0x28 0.--31. 1. "diseng_sig1_CRC_G_Window3,CRC value from green channel" line.long 0x2C "diseng_sig1_CRC_B_Window3,Window 3. Measured CRC Value of Blue Channel" hexmask.long 0x2C 0.--31. 1. "diseng_sig1_CRC_B_Window3,CRC value from blue channel" line.long 0x30 "diseng_sig1_CRC_R_Window4,Window 4. Measured CRC Value of Red Channel" hexmask.long 0x30 0.--31. 1. "diseng_sig1_CRC_R_Window4,CRC value from red channel" line.long 0x34 "diseng_sig1_CRC_G_Window4,Window 4. Measured CRC Value of Green Channel" hexmask.long 0x34 0.--31. 1. "diseng_sig1_CRC_G_Window4,CRC value from green channel" line.long 0x38 "diseng_sig1_CRC_B_Window4,Window 4. Measured CRC Value of Blue Channel" hexmask.long 0x38 0.--31. 1. "diseng_sig1_CRC_B_Window4,CRC value from blue channel" line.long 0x3C "diseng_sig1_CRC_R_Window5,Window 5. Measured CRC Value of Red Channel" hexmask.long 0x3C 0.--31. 1. "diseng_sig1_CRC_R_Window5,CRC value from red channel" line.long 0x40 "diseng_sig1_CRC_G_Window5,Window 5. Measured CRC Value of Green Channel" hexmask.long 0x40 0.--31. 1. "diseng_sig1_CRC_G_Window5,CRC value from green channel" line.long 0x44 "diseng_sig1_CRC_B_Window5,Window 5. Measured CRC Value of Blue Channel" hexmask.long 0x44 0.--31. 1. "diseng_sig1_CRC_B_Window5,CRC value from blue channel" line.long 0x48 "diseng_sig1_CRC_R_Window6,Window 6. Measured CRC Value of Red Channel" hexmask.long 0x48 0.--31. 1. "diseng_sig1_CRC_R_Window6,CRC value from red channel" line.long 0x4C "diseng_sig1_CRC_G_Window6,Window 6. Measured CRC Value of Green Channel" hexmask.long 0x4C 0.--31. 1. "diseng_sig1_CRC_G_Window6,CRC value from green channel" line.long 0x50 "diseng_sig1_CRC_B_Window6,Window 6. Measured CRC Value of Blue Channel" hexmask.long 0x50 0.--31. 1. "diseng_sig1_CRC_B_Window6,CRC value from blue channel" line.long 0x54 "diseng_sig1_CRC_R_Window7,Window 7. Measured CRC Value of Red Channel" hexmask.long 0x54 0.--31. 1. "diseng_sig1_CRC_R_Window7,CRC value from red channel" line.long 0x58 "diseng_sig1_CRC_G_Window7,Window 7. Measured CRC Value of Green Channel" hexmask.long 0x58 0.--31. 1. "diseng_sig1_CRC_G_Window7,CRC value from green channel" line.long 0x5C "diseng_sig1_CRC_B_Window7,Window 7. Measured CRC Value of Blue Channel" hexmask.long 0x5C 0.--31. 1. "diseng_sig1_CRC_B_Window7,CRC value from blue channel" line.long 0x60 "diseng_sig1_Status_Cluster0,Cluster 0. Status" bitfld.long 0x60 7. "diseng_sig1_Sts31_Cluster0,Evaluation of Vector3_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 6. "diseng_sig1_Sts30_Cluster0,Evaluation of Vector3_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 5. "diseng_sig1_Sts21_Cluster0,Evaluation of Vector2_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 4. "diseng_sig1_Sts20_Cluster0,Evaluation of Vector2_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 3. "diseng_sig1_Sts11_Cluster0,Evaluation of Vector1_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 2. "diseng_sig1_Sts10_Cluster0,Evaluation of Vector1_Cluster0 against reference Ref0_Cluster0" "0,1" newline bitfld.long 0x60 1. "diseng_sig1_Sts01_Cluster0,Evaluation of Vector0_Cluster0 against reference Ref1_Cluster0" "0,1" newline bitfld.long 0x60 0. "diseng_sig1_Sts00_Cluster0,Evaluation of Vector0_Cluster0 against reference Ref0_Cluster0" "0,1" line.long 0x64 "diseng_sig1_Counter_Cluster0,Cluster 0. Match and Error Counters" hexmask.long.byte 0x64 16.--23. 1. "diseng_sig1_ErrorCount_Cluster0,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x64 0.--7. 1. "diseng_sig1_MatchCount_Cluster0,Number of evaluations where at least one match occurred" line.long 0x68 "diseng_sig1_Vector0_Cluster0,Cluster 0. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x68 22.--23. "diseng_sig1_Pix3_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 20.--21. "diseng_sig1_Pix3_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 18.--19. "diseng_sig1_Pix3_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x68 16.--17. "diseng_sig1_Pix2_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 14.--15. "diseng_sig1_Pix2_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 12.--13. "diseng_sig1_Pix2_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x68 10.--11. "diseng_sig1_Pix1_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 8.--9. "diseng_sig1_Pix1_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 6.--7. "diseng_sig1_Pix1_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x68 4.--5. "diseng_sig1_Pix0_R10_Cluster0,Red component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x68 2.--3. "diseng_sig1_Pix0_G10_Cluster0,Green component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x68 0.--1. "diseng_sig1_Pix0_B10_Cluster0,Blue component bits[1:0] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x6C "diseng_sig1_Vector1_Cluster0,Cluster 0. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x6C 22.--23. "diseng_sig1_Pix3_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 20.--21. "diseng_sig1_Pix3_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 18.--19. "diseng_sig1_Pix3_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x6C 16.--17. "diseng_sig1_Pix2_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 14.--15. "diseng_sig1_Pix2_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 12.--13. "diseng_sig1_Pix2_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x6C 10.--11. "diseng_sig1_Pix1_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 8.--9. "diseng_sig1_Pix1_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 6.--7. "diseng_sig1_Pix1_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x6C 4.--5. "diseng_sig1_Pix0_R32_Cluster0,Red component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x6C 2.--3. "diseng_sig1_Pix0_G32_Cluster0,Green component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x6C 0.--1. "diseng_sig1_Pix0_B32_Cluster0,Blue component bits[3:2] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x70 "diseng_sig1_Vector2_Cluster0,Cluster 0. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0x70 22.--23. "diseng_sig1_Pix3_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 20.--21. "diseng_sig1_Pix3_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 18.--19. "diseng_sig1_Pix3_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x70 16.--17. "diseng_sig1_Pix2_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 14.--15. "diseng_sig1_Pix2_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 12.--13. "diseng_sig1_Pix2_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x70 10.--11. "diseng_sig1_Pix1_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 8.--9. "diseng_sig1_Pix1_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 6.--7. "diseng_sig1_Pix1_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x70 4.--5. "diseng_sig1_Pix0_R54_Cluster0,Red component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x70 2.--3. "diseng_sig1_Pix0_G54_Cluster0,Green component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x70 0.--1. "diseng_sig1_Pix0_B54_Cluster0,Blue component bits[5:4] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x74 "diseng_sig1_Vector3_Cluster0,Cluster 0. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0x74 22.--23. "diseng_sig1_Pix3_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 20.--21. "diseng_sig1_Pix3_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 18.--19. "diseng_sig1_Pix3_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 3" "0,1,2,3" newline bitfld.long 0x74 16.--17. "diseng_sig1_Pix2_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 14.--15. "diseng_sig1_Pix2_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 12.--13. "diseng_sig1_Pix2_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 2" "0,1,2,3" newline bitfld.long 0x74 10.--11. "diseng_sig1_Pix1_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 8.--9. "diseng_sig1_Pix1_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 6.--7. "diseng_sig1_Pix1_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 1" "0,1,2,3" newline bitfld.long 0x74 4.--5. "diseng_sig1_Pix0_R76_Cluster0,Red component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x74 2.--3. "diseng_sig1_Pix0_G76_Cluster0,Green component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" newline bitfld.long 0x74 0.--1. "diseng_sig1_Pix0_B76_Cluster0,Blue component bits[7:6] of Cluster 0 Pixel 0" "0,1,2,3" line.long 0x78 "diseng_sig1_Status_Cluster1,Cluster 1. Status" bitfld.long 0x78 7. "diseng_sig1_Sts31_Cluster1,Evaluation of Vector3_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 6. "diseng_sig1_Sts30_Cluster1,Evaluation of Vector3_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 5. "diseng_sig1_Sts21_Cluster1,Evaluation of Vector2_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 4. "diseng_sig1_Sts20_Cluster1,Evaluation of Vector2_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 3. "diseng_sig1_Sts11_Cluster1,Evaluation of Vector1_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 2. "diseng_sig1_Sts10_Cluster1,Evaluation of Vector1_Cluster1 against reference Ref0_Cluster1" "0,1" newline bitfld.long 0x78 1. "diseng_sig1_Sts01_Cluster1,Evaluation of Vector0_Cluster1 against reference Ref1_Cluster1" "0,1" newline bitfld.long 0x78 0. "diseng_sig1_Sts00_Cluster1,Evaluation of Vector0_Cluster1 against reference Ref0_Cluster1" "0,1" line.long 0x7C "diseng_sig1_Counter_Cluster1,Cluster 1. Match and Error Counters" hexmask.long.byte 0x7C 16.--23. 1. "diseng_sig1_ErrorCount_Cluster1,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x7C 0.--7. 1. "diseng_sig1_MatchCount_Cluster1,Number of evaluations where at least one match occurred" line.long 0x80 "diseng_sig1_Vector0_Cluster1,Cluster 1. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x80 22.--23. "diseng_sig1_Pix3_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 20.--21. "diseng_sig1_Pix3_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 18.--19. "diseng_sig1_Pix3_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x80 16.--17. "diseng_sig1_Pix2_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 14.--15. "diseng_sig1_Pix2_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 12.--13. "diseng_sig1_Pix2_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x80 10.--11. "diseng_sig1_Pix1_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 8.--9. "diseng_sig1_Pix1_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 6.--7. "diseng_sig1_Pix1_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x80 4.--5. "diseng_sig1_Pix0_R10_Cluster1,Red component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x80 2.--3. "diseng_sig1_Pix0_G10_Cluster1,Green component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x80 0.--1. "diseng_sig1_Pix0_B10_Cluster1,Blue component bits[1:0] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x84 "diseng_sig1_Vector1_Cluster1,Cluster 1. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x84 22.--23. "diseng_sig1_Pix3_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 20.--21. "diseng_sig1_Pix3_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 18.--19. "diseng_sig1_Pix3_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x84 16.--17. "diseng_sig1_Pix2_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 14.--15. "diseng_sig1_Pix2_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 12.--13. "diseng_sig1_Pix2_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x84 10.--11. "diseng_sig1_Pix1_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 8.--9. "diseng_sig1_Pix1_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 6.--7. "diseng_sig1_Pix1_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x84 4.--5. "diseng_sig1_Pix0_R32_Cluster1,Red component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x84 2.--3. "diseng_sig1_Pix0_G32_Cluster1,Green component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x84 0.--1. "diseng_sig1_Pix0_B32_Cluster1,Blue component bits[3:2] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x88 "diseng_sig1_Vector2_Cluster1,Cluster 1. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0x88 22.--23. "diseng_sig1_Pix3_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 20.--21. "diseng_sig1_Pix3_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 18.--19. "diseng_sig1_Pix3_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x88 16.--17. "diseng_sig1_Pix2_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 14.--15. "diseng_sig1_Pix2_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 12.--13. "diseng_sig1_Pix2_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x88 10.--11. "diseng_sig1_Pix1_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 8.--9. "diseng_sig1_Pix1_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 6.--7. "diseng_sig1_Pix1_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x88 4.--5. "diseng_sig1_Pix0_R54_Cluster1,Red component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x88 2.--3. "diseng_sig1_Pix0_G54_Cluster1,Green component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x88 0.--1. "diseng_sig1_Pix0_B54_Cluster1,Blue component bits[5:4] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x8C "diseng_sig1_Vector3_Cluster1,Cluster 1. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0x8C 22.--23. "diseng_sig1_Pix3_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 20.--21. "diseng_sig1_Pix3_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 18.--19. "diseng_sig1_Pix3_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 3" "0,1,2,3" newline bitfld.long 0x8C 16.--17. "diseng_sig1_Pix2_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 14.--15. "diseng_sig1_Pix2_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 12.--13. "diseng_sig1_Pix2_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 2" "0,1,2,3" newline bitfld.long 0x8C 10.--11. "diseng_sig1_Pix1_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 8.--9. "diseng_sig1_Pix1_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 6.--7. "diseng_sig1_Pix1_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 1" "0,1,2,3" newline bitfld.long 0x8C 4.--5. "diseng_sig1_Pix0_R76_Cluster1,Red component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x8C 2.--3. "diseng_sig1_Pix0_G76_Cluster1,Green component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" newline bitfld.long 0x8C 0.--1. "diseng_sig1_Pix0_B76_Cluster1,Blue component bits[7:6] of Cluster 1 Pixel 0" "0,1,2,3" line.long 0x90 "diseng_sig1_Status_Cluster2,Cluster 2. Status" bitfld.long 0x90 7. "diseng_sig1_Sts31_Cluster2,Evaluation of Vector3_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 6. "diseng_sig1_Sts30_Cluster2,Evaluation of Vector3_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 5. "diseng_sig1_Sts21_Cluster2,Evaluation of Vector2_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 4. "diseng_sig1_Sts20_Cluster2,Evaluation of Vector2_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 3. "diseng_sig1_Sts11_Cluster2,Evaluation of Vector1_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 2. "diseng_sig1_Sts10_Cluster2,Evaluation of Vector1_Cluster2 against reference Ref0_Cluster2" "0,1" newline bitfld.long 0x90 1. "diseng_sig1_Sts01_Cluster2,Evaluation of Vector0_Cluster2 against reference Ref1_Cluster2" "0,1" newline bitfld.long 0x90 0. "diseng_sig1_Sts00_Cluster2,Evaluation of Vector0_Cluster2 against reference Ref0_Cluster2" "0,1" line.long 0x94 "diseng_sig1_Counter_Cluster2,Cluster 2. Match and Error Counters" hexmask.long.byte 0x94 16.--23. 1. "diseng_sig1_ErrorCount_Cluster2,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0x94 0.--7. 1. "diseng_sig1_MatchCount_Cluster2,Number of evaluations where at least one match occurred" line.long 0x98 "diseng_sig1_Vector0_Cluster2,Cluster 2. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0x98 22.--23. "diseng_sig1_Pix3_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 20.--21. "diseng_sig1_Pix3_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 18.--19. "diseng_sig1_Pix3_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x98 16.--17. "diseng_sig1_Pix2_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 14.--15. "diseng_sig1_Pix2_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 12.--13. "diseng_sig1_Pix2_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x98 10.--11. "diseng_sig1_Pix1_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 8.--9. "diseng_sig1_Pix1_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 6.--7. "diseng_sig1_Pix1_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x98 4.--5. "diseng_sig1_Pix0_R10_Cluster2,Red component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x98 2.--3. "diseng_sig1_Pix0_G10_Cluster2,Green component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x98 0.--1. "diseng_sig1_Pix0_B10_Cluster2,Blue component bits[1:0] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0x9C "diseng_sig1_Vector1_Cluster2,Cluster 2. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0x9C 22.--23. "diseng_sig1_Pix3_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 20.--21. "diseng_sig1_Pix3_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 18.--19. "diseng_sig1_Pix3_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0x9C 16.--17. "diseng_sig1_Pix2_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 14.--15. "diseng_sig1_Pix2_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 12.--13. "diseng_sig1_Pix2_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0x9C 10.--11. "diseng_sig1_Pix1_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 8.--9. "diseng_sig1_Pix1_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 6.--7. "diseng_sig1_Pix1_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0x9C 4.--5. "diseng_sig1_Pix0_R32_Cluster2,Red component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x9C 2.--3. "diseng_sig1_Pix0_G32_Cluster2,Green component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0x9C 0.--1. "diseng_sig1_Pix0_B32_Cluster2,Blue component bits[3:2] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA0 "diseng_sig1_Vector2_Cluster2,Cluster 2. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0xA0 22.--23. "diseng_sig1_Pix3_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 20.--21. "diseng_sig1_Pix3_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 18.--19. "diseng_sig1_Pix3_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA0 16.--17. "diseng_sig1_Pix2_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 14.--15. "diseng_sig1_Pix2_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 12.--13. "diseng_sig1_Pix2_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA0 10.--11. "diseng_sig1_Pix1_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 8.--9. "diseng_sig1_Pix1_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 6.--7. "diseng_sig1_Pix1_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA0 4.--5. "diseng_sig1_Pix0_R54_Cluster2,Red component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA0 2.--3. "diseng_sig1_Pix0_G54_Cluster2,Green component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA0 0.--1. "diseng_sig1_Pix0_B54_Cluster2,Blue component bits[5:4] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA4 "diseng_sig1_Vector3_Cluster2,Cluster 2. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0xA4 22.--23. "diseng_sig1_Pix3_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 20.--21. "diseng_sig1_Pix3_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 18.--19. "diseng_sig1_Pix3_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 3" "0,1,2,3" newline bitfld.long 0xA4 16.--17. "diseng_sig1_Pix2_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 14.--15. "diseng_sig1_Pix2_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 12.--13. "diseng_sig1_Pix2_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 2" "0,1,2,3" newline bitfld.long 0xA4 10.--11. "diseng_sig1_Pix1_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 8.--9. "diseng_sig1_Pix1_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 6.--7. "diseng_sig1_Pix1_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 1" "0,1,2,3" newline bitfld.long 0xA4 4.--5. "diseng_sig1_Pix0_R76_Cluster2,Red component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA4 2.--3. "diseng_sig1_Pix0_G76_Cluster2,Green component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" newline bitfld.long 0xA4 0.--1. "diseng_sig1_Pix0_B76_Cluster2,Blue component bits[7:6] of Cluster 2 Pixel 0" "0,1,2,3" line.long 0xA8 "diseng_sig1_Status_Cluster3,Cluster 3. Status" bitfld.long 0xA8 7. "diseng_sig1_Sts31_Cluster3,Evaluation of Vector3_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 6. "diseng_sig1_Sts30_Cluster3,Evaluation of Vector3_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 5. "diseng_sig1_Sts21_Cluster3,Evaluation of Vector2_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 4. "diseng_sig1_Sts20_Cluster3,Evaluation of Vector2_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 3. "diseng_sig1_Sts11_Cluster3,Evaluation of Vector1_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 2. "diseng_sig1_Sts10_Cluster3,Evaluation of Vector1_Cluster3 against reference Ref0_Cluster3" "0,1" newline bitfld.long 0xA8 1. "diseng_sig1_Sts01_Cluster3,Evaluation of Vector0_Cluster3 against reference Ref1_Cluster3" "0,1" newline bitfld.long 0xA8 0. "diseng_sig1_Sts00_Cluster3,Evaluation of Vector0_Cluster3 against reference Ref0_Cluster3" "0,1" line.long 0xAC "diseng_sig1_Counter_Cluster3,Cluster 3. Match and Error Counters" hexmask.long.byte 0xAC 16.--23. 1. "diseng_sig1_ErrorCount_Cluster3,Number of evaluations where no match at all occurred" newline hexmask.long.byte 0xAC 0.--7. 1. "diseng_sig1_MatchCount_Cluster3,Number of evaluations where at least one match occurred" line.long 0xB0 "diseng_sig1_Vector0_Cluster3,Cluster 3. Result Vector 0. RGB bitslices[1:0]" bitfld.long 0xB0 22.--23. "diseng_sig1_Pix3_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 20.--21. "diseng_sig1_Pix3_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 18.--19. "diseng_sig1_Pix3_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB0 16.--17. "diseng_sig1_Pix2_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 14.--15. "diseng_sig1_Pix2_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 12.--13. "diseng_sig1_Pix2_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB0 10.--11. "diseng_sig1_Pix1_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 8.--9. "diseng_sig1_Pix1_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 6.--7. "diseng_sig1_Pix1_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB0 4.--5. "diseng_sig1_Pix0_R10_Cluster3,Red component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB0 2.--3. "diseng_sig1_Pix0_G10_Cluster3,Green component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB0 0.--1. "diseng_sig1_Pix0_B10_Cluster3,Blue component bits[1:0] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xB4 "diseng_sig1_Vector1_Cluster3,Cluster 3. Result Vector 1. RGB bitslices[3:2]" bitfld.long 0xB4 22.--23. "diseng_sig1_Pix3_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 20.--21. "diseng_sig1_Pix3_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 18.--19. "diseng_sig1_Pix3_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB4 16.--17. "diseng_sig1_Pix2_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 14.--15. "diseng_sig1_Pix2_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 12.--13. "diseng_sig1_Pix2_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB4 10.--11. "diseng_sig1_Pix1_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 8.--9. "diseng_sig1_Pix1_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 6.--7. "diseng_sig1_Pix1_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB4 4.--5. "diseng_sig1_Pix0_R32_Cluster3,Red component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB4 2.--3. "diseng_sig1_Pix0_G32_Cluster3,Green component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB4 0.--1. "diseng_sig1_Pix0_B32_Cluster3,Blue component bits[3:2] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xB8 "diseng_sig1_Vector2_Cluster3,Cluster 3. Result Vector 2. RGB bitslices[5:4]" bitfld.long 0xB8 22.--23. "diseng_sig1_Pix3_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 20.--21. "diseng_sig1_Pix3_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 18.--19. "diseng_sig1_Pix3_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xB8 16.--17. "diseng_sig1_Pix2_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 14.--15. "diseng_sig1_Pix2_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 12.--13. "diseng_sig1_Pix2_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xB8 10.--11. "diseng_sig1_Pix1_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 8.--9. "diseng_sig1_Pix1_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 6.--7. "diseng_sig1_Pix1_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xB8 4.--5. "diseng_sig1_Pix0_R54_Cluster3,Red component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB8 2.--3. "diseng_sig1_Pix0_G54_Cluster3,Green component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xB8 0.--1. "diseng_sig1_Pix0_B54_Cluster3,Blue component bits[5:4] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xBC "diseng_sig1_Vector3_Cluster3,Cluster 3. Result Vector 3. RGB bitslices[7:6]" bitfld.long 0xBC 22.--23. "diseng_sig1_Pix3_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 20.--21. "diseng_sig1_Pix3_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 18.--19. "diseng_sig1_Pix3_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 3" "0,1,2,3" newline bitfld.long 0xBC 16.--17. "diseng_sig1_Pix2_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 14.--15. "diseng_sig1_Pix2_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 12.--13. "diseng_sig1_Pix2_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 2" "0,1,2,3" newline bitfld.long 0xBC 10.--11. "diseng_sig1_Pix1_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 8.--9. "diseng_sig1_Pix1_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 6.--7. "diseng_sig1_Pix1_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 1" "0,1,2,3" newline bitfld.long 0xBC 4.--5. "diseng_sig1_Pix0_R76_Cluster3,Red component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xBC 2.--3. "diseng_sig1_Pix0_G76_Cluster3,Green component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" newline bitfld.long 0xBC 0.--1. "diseng_sig1_Pix0_B76_Cluster3,Blue component bits[7:6] of Cluster 3 Pixel 0" "0,1,2,3" line.long 0xC0 "diseng_sig1_PixCnt_Stats0_Win0,Pixel Counter Register. Statistics Block 0. Window 0" hexmask.long 0xC0 0.--27. 1. "diseng_sig1_Px_Cnt_S0_Win0,Pixel counter determines number of valid pixels in related window." line.long 0xC4 "diseng_sig1_PixMax_Stats0_Win0,Pixel Max Values Register. Statistics Block 0. Window 0" hexmask.long.byte 0xC4 16.--23. 1. "diseng_sig1_Rd_Max_S0_Win0,Max value of red component of pixels in related window." newline hexmask.long.byte 0xC4 8.--15. 1. "diseng_sig1_Gn_Max_S0_Win0,Max value of green component of pixels in related window." newline hexmask.long.byte 0xC4 0.--7. 1. "diseng_sig1_Bl_Max_S0_Win0,Max value of blue component of pixels in related window." line.long 0xC8 "diseng_sig1_PixMin_Stats0_Win0,Pixel Min Values Register. Statistics Block 0. Window 0" hexmask.long.byte 0xC8 16.--23. 1. "diseng_sig1_Rd_Min_S0_Win0,Min value of red component of pixels in related window." newline hexmask.long.byte 0xC8 8.--15. 1. "diseng_sig1_Gn_Min_S0_Win0,Min value of green component of pixels in related window." newline hexmask.long.byte 0xC8 0.--7. 1. "diseng_sig1_Bl_Min_S0_Win0,Min value of blue component of pixels in related window." line.long 0xCC "diseng_sig1_RedSum_Stats0_Win0,Red Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xCC 0.--31. 1. "diseng_sig1_Rd_Sum_S0_Win0,Sum of Red Component Values of Pixels in related Window." line.long 0xD0 "diseng_sig1_GreenSum_Stats0_Win0,Green Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD0 0.--31. 1. "diseng_sig1_Gn_Sum_S0_Win0,Sum of Green Component Values of Pixels in related Window." line.long 0xD4 "diseng_sig1_BlueSum_Stats0_Win0,Blue Component Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD4 0.--31. 1. "diseng_sig1_Bl_Sum_S0_Win0,Sum of Blue Component Values of Pixels in related Window." line.long 0xD8 "diseng_sig1_LumSum_Stats0_Win0,Luminance Sum Register. Statistics Block 0. Window 0" hexmask.long 0xD8 0.--31. 1. "diseng_sig1_Lm_Sum_S0_Win0,Sum of Luminance Values of Pixels in related Window." line.long 0xDC "diseng_sig1_PixCnt_Stats1_Win0,Pixel Counter Register. Statistics Block 1. Window 0" hexmask.long 0xDC 0.--27. 1. "diseng_sig1_Px_Cnt_S1_Win0,Pixel counter determines number of valid pixels in related window." line.long 0xE0 "diseng_sig1_PixMax_Stats1_Win0,Pixel Max Values Register. Statistics Block 1. Window 0" hexmask.long.byte 0xE0 16.--23. 1. "diseng_sig1_Rd_Max_S1_Win0,Max value of red component of pixels in related window." newline hexmask.long.byte 0xE0 8.--15. 1. "diseng_sig1_Gn_Max_S1_Win0,Max value of green component of pixels in related window." newline hexmask.long.byte 0xE0 0.--7. 1. "diseng_sig1_Bl_Max_S1_Win0,Max value of blue component of pixels in related window." line.long 0xE4 "diseng_sig1_PixMin_Stats1_Win0,Pixel Min Values Register. Statistics Block 1. Window 0" hexmask.long.byte 0xE4 16.--23. 1. "diseng_sig1_Rd_Min_S1_Win0,Min value of red component of pixels in related window." newline hexmask.long.byte 0xE4 8.--15. 1. "diseng_sig1_Gn_Min_S1_Win0,Min value of green component of pixels in related window." newline hexmask.long.byte 0xE4 0.--7. 1. "diseng_sig1_Bl_Min_S1_Win0,Min value of blue component of pixels in related window." line.long 0xE8 "diseng_sig1_RedSum_Stats1_Win0,Red Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xE8 0.--31. 1. "diseng_sig1_Rd_Sum_S1_Win0,Sum of Red Component Values of Pixels in related Window." line.long 0xEC "diseng_sig1_GreenSum_Stats1_Win0,Green Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xEC 0.--31. 1. "diseng_sig1_Gn_Sum_S1_Win0,Sum of Green Component Values of Pixels in related Window." line.long 0xF0 "diseng_sig1_BlueSum_Stats1_Win0,Blue Component Sum Register. Statistics Block 1. Window 0" hexmask.long 0xF0 0.--31. 1. "diseng_sig1_Bl_Sum_S1_Win0,Sum of Blue Component Values of Pixels in related Window." line.long 0xF4 "diseng_sig1_PixCnt_Stats0_Win1,Pixel Counter Register. Statistics Block 0. Window 1" hexmask.long 0xF4 0.--27. 1. "diseng_sig1_Px_Cnt_S0_Win1,Pixel counter determines number of valid pixels in related window." line.long 0xF8 "diseng_sig1_PixMax_Stats0_Win1,Pixel Max Values Register. Statistics Block 0. Window 1" hexmask.long.byte 0xF8 16.--23. 1. "diseng_sig1_Rd_Max_S0_Win1,Max value of red component of pixels in related window." newline hexmask.long.byte 0xF8 8.--15. 1. "diseng_sig1_Gn_Max_S0_Win1,Max value of green component of pixels in related window." newline hexmask.long.byte 0xF8 0.--7. 1. "diseng_sig1_Bl_Max_S0_Win1,Max value of blue component of pixels in related window." line.long 0xFC "diseng_sig1_PixMin_Stats0_Win1,Pixel Min Values Register. Statistics Block 0. Window 1" hexmask.long.byte 0xFC 16.--23. 1. "diseng_sig1_Rd_Min_S0_Win1,Min value of red component of pixels in related window." newline hexmask.long.byte 0xFC 8.--15. 1. "diseng_sig1_Gn_Min_S0_Win1,Min value of green component of pixels in related window." newline hexmask.long.byte 0xFC 0.--7. 1. "diseng_sig1_Bl_Min_S0_Win1,Min value of blue component of pixels in related window." line.long 0x100 "diseng_sig1_RedSum_Stats0_Win1,Red Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x100 0.--31. 1. "diseng_sig1_Rd_Sum_S0_Win1,Sum of Red Component Values of Pixels in related Window." line.long 0x104 "diseng_sig1_GreenSum_Stats0_Win1,Green Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x104 0.--31. 1. "diseng_sig1_Gn_Sum_S0_Win1,Sum of Green Component Values of Pixels in related Window." line.long 0x108 "diseng_sig1_BlueSum_Stats0_Win1,Blue Component Sum Register. Statistics Block 0. Window 1" hexmask.long 0x108 0.--31. 1. "diseng_sig1_Bl_Sum_S0_Win1,Sum of Blue Component Values of Pixels in related Window." line.long 0x10C "diseng_sig1_LumSum_Stats0_Win1,Luminance Sum Register. Statistics Block 0. Window 1" hexmask.long 0x10C 0.--31. 1. "diseng_sig1_Lm_Sum_S0_Win1,Sum of Luminance Values of Pixels in related Window." line.long 0x110 "diseng_sig1_PixCnt_Stats1_Win1,Pixel Counter Register. Statistics Block 1. Window 1" hexmask.long 0x110 0.--27. 1. "diseng_sig1_Px_Cnt_S1_Win1,Pixel counter determines number of valid pixels in related window." line.long 0x114 "diseng_sig1_PixMax_Stats1_Win1,Pixel Max Values Register. Statistics Block 1. Window 1" hexmask.long.byte 0x114 16.--23. 1. "diseng_sig1_Rd_Max_S1_Win1,Max value of red component of pixels in related window." newline hexmask.long.byte 0x114 8.--15. 1. "diseng_sig1_Gn_Max_S1_Win1,Max value of green component of pixels in related window." newline hexmask.long.byte 0x114 0.--7. 1. "diseng_sig1_Bl_Max_S1_Win1,Max value of blue component of pixels in related window." line.long 0x118 "diseng_sig1_PixMin_Stats1_Win1,Pixel Min Values Register. Statistics Block 1. Window 1" hexmask.long.byte 0x118 16.--23. 1. "diseng_sig1_Rd_Min_S1_Win1,Min value of red component of pixels in related window." newline hexmask.long.byte 0x118 8.--15. 1. "diseng_sig1_Gn_Min_S1_Win1,Min value of green component of pixels in related window." newline hexmask.long.byte 0x118 0.--7. 1. "diseng_sig1_Bl_Min_S1_Win1,Min value of blue component of pixels in related window." line.long 0x11C "diseng_sig1_RedSum_Stats1_Win1,Red Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x11C 0.--31. 1. "diseng_sig1_Rd_Sum_S1_Win1,Sum of Red Component Values of Pixels in related Window." line.long 0x120 "diseng_sig1_GreenSum_Stats1_Win1,Green Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x120 0.--31. 1. "diseng_sig1_Gn_Sum_S1_Win1,Sum of Green Component Values of Pixels in related Window." line.long 0x124 "diseng_sig1_BlueSum_Stats1_Win1,Blue Component Sum Register. Statistics Block 1. Window 1" hexmask.long 0x124 0.--31. 1. "diseng_sig1_Bl_Sum_S1_Win1,Sum of Blue Component Values of Pixels in related Window." line.long 0x128 "diseng_sig1_PixCnt_Stats0_Win2,Pixel Counter Register. Statistics Block 0. Window 2" hexmask.long 0x128 0.--27. 1. "diseng_sig1_Px_Cnt_S0_Win2,Pixel counter determines number of valid pixels in related window." line.long 0x12C "diseng_sig1_PixMax_Stats0_Win2,Pixel Max Values Register. Statistics Block 0. Window 2" hexmask.long.byte 0x12C 16.--23. 1. "diseng_sig1_Rd_Max_S0_Win2,Max value of red component of pixels in related window." newline hexmask.long.byte 0x12C 8.--15. 1. "diseng_sig1_Gn_Max_S0_Win2,Max value of green component of pixels in related window." newline hexmask.long.byte 0x12C 0.--7. 1. "diseng_sig1_Bl_Max_S0_Win2,Max value of blue component of pixels in related window." line.long 0x130 "diseng_sig1_PixMin_Stats0_Win2,Pixel Min Values Register. Statistics Block 0. Window 2" hexmask.long.byte 0x130 16.--23. 1. "diseng_sig1_Rd_Min_S0_Win2,Min value of red component of pixels in related window." newline hexmask.long.byte 0x130 8.--15. 1. "diseng_sig1_Gn_Min_S0_Win2,Min value of green component of pixels in related window." newline hexmask.long.byte 0x130 0.--7. 1. "diseng_sig1_Bl_Min_S0_Win2,Min value of blue component of pixels in related window." line.long 0x134 "diseng_sig1_RedSum_Stats0_Win2,Red Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x134 0.--31. 1. "diseng_sig1_Rd_Sum_S0_Win2,Sum of Red Component Values of Pixels in related Window." line.long 0x138 "diseng_sig1_GreenSum_Stats0_Win2,Green Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x138 0.--31. 1. "diseng_sig1_Gn_Sum_S0_Win2,Sum of Green Component Values of Pixels in related Window." line.long 0x13C "diseng_sig1_BlueSum_Stats0_Win2,Blue Component Sum Register. Statistics Block 0. Window 2" hexmask.long 0x13C 0.--31. 1. "diseng_sig1_Bl_Sum_S0_Win2,Sum of Blue Component Values of Pixels in related Window." line.long 0x140 "diseng_sig1_LumSum_Stats0_Win2,Luminance Sum Register. Statistics Block 0. Window 2" hexmask.long 0x140 0.--31. 1. "diseng_sig1_Lm_Sum_S0_Win2,Sum of Luminance Values of Pixels in related Window." line.long 0x144 "diseng_sig1_PixCnt_Stats1_Win2,Pixel Counter Register. Statistics Block 1. Window 2" hexmask.long 0x144 0.--27. 1. "diseng_sig1_Px_Cnt_S1_Win2,Pixel counter determines number of valid pixels in related window." line.long 0x148 "diseng_sig1_PixMax_Stats1_Win2,Pixel Max Values Register. Statistics Block 1. Window 2" hexmask.long.byte 0x148 16.--23. 1. "diseng_sig1_Rd_Max_S1_Win2,Max value of red component of pixels in related window." newline hexmask.long.byte 0x148 8.--15. 1. "diseng_sig1_Gn_Max_S1_Win2,Max value of green component of pixels in related window." newline hexmask.long.byte 0x148 0.--7. 1. "diseng_sig1_Bl_Max_S1_Win2,Max value of blue component of pixels in related window." line.long 0x14C "diseng_sig1_PixMin_Stats1_Win2,Pixel Min Values Register. Statistics Block 1. Window 2" hexmask.long.byte 0x14C 16.--23. 1. "diseng_sig1_Rd_Min_S1_Win2,Min value of red component of pixels in related window." newline hexmask.long.byte 0x14C 8.--15. 1. "diseng_sig1_Gn_Min_S1_Win2,Min value of green component of pixels in related window." newline hexmask.long.byte 0x14C 0.--7. 1. "diseng_sig1_Bl_Min_S1_Win2,Min value of blue component of pixels in related window." line.long 0x150 "diseng_sig1_RedSum_Stats1_Win2,Red Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x150 0.--31. 1. "diseng_sig1_Rd_Sum_S1_Win2,Sum of Red Component Values of Pixels in related Window." line.long 0x154 "diseng_sig1_GreenSum_Stats1_Win2,Green Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x154 0.--31. 1. "diseng_sig1_Gn_Sum_S1_Win2,Sum of Green Component Values of Pixels in related Window." line.long 0x158 "diseng_sig1_BlueSum_Stats1_Win2,Blue Component Sum Register. Statistics Block 1. Window 2" hexmask.long 0x158 0.--31. 1. "diseng_sig1_Bl_Sum_S1_Win2,Sum of Blue Component Values of Pixels in related Window." line.long 0x15C "diseng_sig1_PixCnt_Stats0_Win3,Pixel Counter Register. Statistics Block 0. Window 3" hexmask.long 0x15C 0.--27. 1. "diseng_sig1_Px_Cnt_S0_Win3,Pixel counter determines number of valid pixels in related window." line.long 0x160 "diseng_sig1_PixMax_Stats0_Win3,Pixel Max Values Register. Statistics Block 0. Window 3" hexmask.long.byte 0x160 16.--23. 1. "diseng_sig1_Rd_Max_S0_Win3,Max value of red component of pixels in related window." newline hexmask.long.byte 0x160 8.--15. 1. "diseng_sig1_Gn_Max_S0_Win3,Max value of green component of pixels in related window." newline hexmask.long.byte 0x160 0.--7. 1. "diseng_sig1_Bl_Max_S0_Win3,Max value of blue component of pixels in related window." line.long 0x164 "diseng_sig1_PixMin_Stats0_Win3,Pixel Min Values Register. Statistics Block 0. Window 3" hexmask.long.byte 0x164 16.--23. 1. "diseng_sig1_Rd_Min_S0_Win3,Min value of red component of pixels in related window." newline hexmask.long.byte 0x164 8.--15. 1. "diseng_sig1_Gn_Min_S0_Win3,Min value of green component of pixels in related window." newline hexmask.long.byte 0x164 0.--7. 1. "diseng_sig1_Bl_Min_S0_Win3,Min value of blue component of pixels in related window." line.long 0x168 "diseng_sig1_RedSum_Stats0_Win3,Red Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x168 0.--31. 1. "diseng_sig1_Rd_Sum_S0_Win3,Sum of Red Component Values of Pixels in related Window." line.long 0x16C "diseng_sig1_GreenSum_Stats0_Win3,Green Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x16C 0.--31. 1. "diseng_sig1_Gn_Sum_S0_Win3,Sum of Green Component Values of Pixels in related Window." line.long 0x170 "diseng_sig1_BlueSum_Stats0_Win3,Blue Component Sum Register. Statistics Block 0. Window 3" hexmask.long 0x170 0.--31. 1. "diseng_sig1_Bl_Sum_S0_Win3,Sum of Blue Component Values of Pixels in related Window." line.long 0x174 "diseng_sig1_LumSum_Stats0_Win3,Luminance Sum Register. Statistics Block 0. Window 3" hexmask.long 0x174 0.--31. 1. "diseng_sig1_Lm_Sum_S0_Win3,Sum of Luminance Values of Pixels in related Window." line.long 0x178 "diseng_sig1_PixCnt_Stats1_Win3,Pixel Counter Register. Statistics Block 1. Window 3" hexmask.long 0x178 0.--27. 1. "diseng_sig1_Px_Cnt_S1_Win3,Pixel counter determines number of valid pixels in related window." line.long 0x17C "diseng_sig1_PixMax_Stats1_Win3,Pixel Max Values Register. Statistics Block 1. Window 3" hexmask.long.byte 0x17C 16.--23. 1. "diseng_sig1_Rd_Max_S1_Win3,Max value of red component of pixels in related window." newline hexmask.long.byte 0x17C 8.--15. 1. "diseng_sig1_Gn_Max_S1_Win3,Max value of green component of pixels in related window." newline hexmask.long.byte 0x17C 0.--7. 1. "diseng_sig1_Bl_Max_S1_Win3,Max value of blue component of pixels in related window." line.long 0x180 "diseng_sig1_PixMin_Stats1_Win3,Pixel Min Values Register. Statistics Block 1. Window 3" hexmask.long.byte 0x180 16.--23. 1. "diseng_sig1_Rd_Min_S1_Win3,Min value of red component of pixels in related window." newline hexmask.long.byte 0x180 8.--15. 1. "diseng_sig1_Gn_Min_S1_Win3,Min value of green component of pixels in related window." newline hexmask.long.byte 0x180 0.--7. 1. "diseng_sig1_Bl_Min_S1_Win3,Min value of blue component of pixels in related window." line.long 0x184 "diseng_sig1_RedSum_Stats1_Win3,Red Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x184 0.--31. 1. "diseng_sig1_Rd_Sum_S1_Win3,Sum of Red Component Values of Pixels in related Window." line.long 0x188 "diseng_sig1_GreenSum_Stats1_Win3,Green Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x188 0.--31. 1. "diseng_sig1_Gn_Sum_S1_Win3,Sum of Green Component Values of Pixels in related Window." line.long 0x18C "diseng_sig1_BlueSum_Stats1_Win3,Blue Component Sum Register. Statistics Block 1. Window 3" hexmask.long 0x18C 0.--31. 1. "diseng_sig1_Bl_Sum_S1_Win3,Sum of Blue Component Values of Pixels in related Window." wgroup.long 0x341000++0x3 line.long 0x0 "diseng_sig1cfg_LockUnlock1,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_sig1cfg_LockUnlock1,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x341004++0x3 line.long 0x0 "diseng_sig1cfg_LockStatus1,Protection status of this address block." bitfld.long 0x0 8. "diseng_sig1cfg_FreezeStatus1,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_sig1cfg_PrivilegeStatus1,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_sig1cfg_LockStatus1,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x341008++0x3 line.long 0x0 "diseng_sig1cfg_SrcSelect,Tap selection for Signature1." bitfld.long 0x0 0.--1. "diseng_sig1cfg_sig1_select,Selects a source for Sig#1 unit." "0,1,2,3" wgroup.long 0x350000++0x3 line.long 0x0 "diseng_lut3d1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_lut3d1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x350004++0x3 line.long 0x0 "diseng_lut3d1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_lut3d1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_lut3d1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_lut3d1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x350008++0x7 line.long 0x0 "diseng_lut3d1_StaticControl,lut3d static control register" bitfld.long 0x0 0. "diseng_lut3d1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "diseng_lut3d1_Control,lut3d control register" hexmask.long.byte 0x4 8.--11. 1. "diseng_lut3d1_IDX_BITS,CLut/CLutL: Number of msb bits of the red color input used for the LUT index input in R_TO_RGB(A) mode." newline bitfld.long 0x4 6. "diseng_lut3d1_AlphaInvert,Chooses whether to disable lookup for alpha components smaller or greater/equal than 128." "0,1" newline bitfld.long 0x4 5. "diseng_lut3d1_AlphaMask,Enables the alpha mask mode." "0,1" newline bitfld.long 0x4 3. "diseng_lut3d1_DITH_EN,Color LUT data output bitwidth select" "0,1" newline bitfld.long 0x4 0.--2. "diseng_lut3d1_MODE,Operation mode for 3D lookup table" "0,1,2,3,4,5,6,7" group.long 0x352000++0x3 line.long 0x0 "diseng_lut3d1_LUT,Look Up Table" hexmask.long.tbyte 0x0 0.--19. 1. "diseng_lut3d1_DATA,LUT Data component" wgroup.long 0x360000++0x3 line.long 0x0 "diseng_matrix1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_matrix1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x360004++0x3 line.long 0x0 "diseng_matrix1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_matrix1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_matrix1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_matrix1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x360008++0x1F line.long 0x0 "diseng_matrix1_StaticControl,Color Matrix static control register" bitfld.long 0x0 0. "diseng_matrix1_ShdEn,Enables shadowing of all RWS type registers (0=write_through 1=shadowed)." "0: write_through,1: shadowed)" line.long 0x4 "diseng_matrix1_Control,Color Matrix control register" bitfld.long 0x4 5. "diseng_matrix1_AlphaInvert,Value 1 inverts the effect of the alpha mask mode when enabled (pixels with alpha value greater or equal 0." "0,1" newline bitfld.long 0x4 4. "diseng_matrix1_AlphaMask,Value 1 enables the alpha mask mode." "0,1" newline bitfld.long 0x4 0.--1. "diseng_matrix1_MODE,Operation mode for color matrix" "0,1,2,3" line.long 0x8 "diseng_matrix1_Red0,Matrix values for calculation of the red output value." hexmask.long.word 0x8 16.--28. 1. "diseng_matrix1_A12,Value for green input." newline hexmask.long.word 0x8 0.--12. 1. "diseng_matrix1_A11,Value for red input." line.long 0xC "diseng_matrix1_Red1,Matrix values for calculation of the red output value." hexmask.long.word 0xC 0.--12. 1. "diseng_matrix1_A13,Value for blue input." line.long 0x10 "diseng_matrix1_Green0,Matrix values for calculation of the green output value." hexmask.long.word 0x10 16.--28. 1. "diseng_matrix1_A22,Value for green input." newline hexmask.long.word 0x10 0.--12. 1. "diseng_matrix1_A21,Value for red input." line.long 0x14 "diseng_matrix1_Green1,Matrix values for calculation of the green output value." hexmask.long.word 0x14 0.--12. 1. "diseng_matrix1_A23,Value for blue input." line.long 0x18 "diseng_matrix1_Blue0,Matrix values for calculation of the blue output value." hexmask.long.word 0x18 16.--28. 1. "diseng_matrix1_A32,Value for green input." newline hexmask.long.word 0x18 0.--12. 1. "diseng_matrix1_A31,Value for red input." line.long 0x1C "diseng_matrix1_Blue1,Matrix values for calculation of the blue output value." hexmask.long.word 0x1C 0.--12. 1. "diseng_matrix1_A33,Value for blue input." group.long 0x360030++0x7 line.long 0x0 "diseng_matrix1_OffsetVector0,Offset vectors for red and green output." hexmask.long.word 0x0 16.--28. 1. "diseng_matrix1_C2,Green output offset." newline hexmask.long.word 0x0 0.--12. 1. "diseng_matrix1_C1,Red output offset." line.long 0x4 "diseng_matrix1_OffsetVector1,Offset vectors for blue and alpha output." hexmask.long.word 0x4 0.--12. 1. "diseng_matrix1_C3,Blue output offset." rgroup.long 0x360038++0x3 line.long 0x0 "diseng_matrix1_LastControlWord,Value of last received control word. for debugging." hexmask.long 0x0 0.--31. 1. "diseng_matrix1_L_VAL,Value of last received control word." wgroup.long 0x370000++0x3 line.long 0x0 "diseng_dither1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_dither1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x370004++0x3 line.long 0x0 "diseng_dither1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "diseng_dither1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_dither1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_dither1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x370008++0xB line.long 0x0 "diseng_dither1_Control,Dither Unit common control." bitfld.long 0x0 0.--1. "diseng_dither1_mode,Mode which switches Dither Unit on/off/10bit/12bit." "0,1,2,3" line.long 0x4 "diseng_dither1_DitherControl10bits,Dither Unit processing control." bitfld.long 0x4 8.--10. "diseng_dither1_red_range_select_10bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "diseng_dither1_green_range_select_10bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 0.--2. "diseng_dither1_blue_range_select_10bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" line.long 0x8 "diseng_dither1_DitherControl12bits,Dither Unit processing control." bitfld.long 0x8 24.--25. "diseng_dither1_alpha_mode,Enables/disables that dithering can be switched by alpha bit." "0,1,2,3" newline bitfld.long 0x8 20.--21. "diseng_dither1_algo_select,The number of output colors that can virtually be displayed by dithering is slightly lower than the number of physical input colors." "0,1,2,3" newline bitfld.long 0x8 16. "diseng_dither1_offset_select,Selects the method how the dither offset is calculated." "0,1" newline bitfld.long 0x8 8.--10. "diseng_dither1_red_range_select_12bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 4.--6. "diseng_dither1_green_range_select_12bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "diseng_dither1_blue_range_select_12bit,Mode which sets the reduction of component widths." "0,1,2,3,4,5,6,7" wgroup.long 0x371000++0x3 line.long 0x0 "diseng_dither1cfg_LockUnlock1,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "diseng_dither1cfg_LockUnlock1,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x371004++0x3 line.long 0x0 "diseng_dither1cfg_LockStatus1,Protection status of this address block." bitfld.long 0x0 8. "diseng_dither1cfg_FreezeStatus1,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "diseng_dither1cfg_PrivilegeStatus1,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "diseng_dither1cfg_LockStatus1,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x371008++0x3 line.long 0x0 "diseng_dither1cfg_PolarityCtrl1,Polarity control for display stream #1." bitfld.long 0x0 2. "diseng_dither1cfg_PolEn1,Polarity of Data_Enable signal." "0,1" newline bitfld.long 0x0 1. "diseng_dither1cfg_PolVs1,Polarity of vsync signal." "0,1" newline bitfld.long 0x0 0. "diseng_dither1cfg_PolHs1,Polarity of hsync signal." "0,1" wgroup.long 0x381000++0x3 line.long 0x0 "dispirq0_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "dispirq0_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x381004++0x3 line.long 0x0 "dispirq0_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "dispirq0_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "dispirq0_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "dispirq0_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x381008++0xB line.long 0x0 "dispirq0_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "dispirq0_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq0_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "dispirq0_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq0_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "dispirq0_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x381014++0x17 line.long 0x0 "dispirq0_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "dispirq0_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq0_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "dispirq0_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq0_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq0_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "dispirq0_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "dispirq0_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "dispirq0_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "dispirq0_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "dispirq0_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "dispirq0_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x38102C++0xB line.long 0x0 "dispirq0_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "dispirq0_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "dispirq0_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "dispirq0_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "dispirq0_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq0_InterruptStatus2,Same as InterruptStatus2." wgroup.long 0x391000++0x3 line.long 0x0 "dispirq1_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "dispirq1_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x391004++0x3 line.long 0x0 "dispirq1_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "dispirq1_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "dispirq1_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "dispirq1_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x391008++0xB line.long 0x0 "dispirq1_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "dispirq1_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq1_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "dispirq1_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq1_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "dispirq1_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x391014++0x17 line.long 0x0 "dispirq1_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "dispirq1_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq1_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "dispirq1_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq1_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq1_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "dispirq1_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "dispirq1_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "dispirq1_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "dispirq1_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "dispirq1_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "dispirq1_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x39102C++0xB line.long 0x0 "dispirq1_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "dispirq1_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "dispirq1_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "dispirq1_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "dispirq1_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq1_InterruptStatus2,Same as InterruptStatus2." wgroup.long 0x3A1000++0x3 line.long 0x0 "dispirq2_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "dispirq2_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x3A1004++0x3 line.long 0x0 "dispirq2_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "dispirq2_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "dispirq2_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "dispirq2_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x3A1008++0xB line.long 0x0 "dispirq2_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "dispirq2_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq2_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "dispirq2_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq2_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "dispirq2_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x3A1014++0x17 line.long 0x0 "dispirq2_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "dispirq2_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq2_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "dispirq2_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq2_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq2_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "dispirq2_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "dispirq2_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "dispirq2_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "dispirq2_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "dispirq2_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "dispirq2_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x3A102C++0xB line.long 0x0 "dispirq2_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "dispirq2_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "dispirq2_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "dispirq2_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "dispirq2_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq2_InterruptStatus2,Same as InterruptStatus2." wgroup.long 0x3B1000++0x3 line.long 0x0 "dispirq3_LockUnlock,Register to change the protection status of this address block." hexmask.long 0x0 0.--31. 1. "dispirq3_LockUnlock,The protection status is changed by writing one of the following key values to this field:" rgroup.long 0x3B1004++0x3 line.long 0x0 "dispirq3_LockStatus,Protection status of this address block." bitfld.long 0x0 8. "dispirq3_FreezeStatus,Current freeze status: 0 = protection status can be changed 1 = cannot be changed." "0: protection status can be changed,1: cannot be changed" newline bitfld.long 0x0 4. "dispirq3_PrivilegeStatus,Current status of privilege protection: 0 = inactive 1 = active." "0: inactive,1: active" newline bitfld.long 0x0 0. "dispirq3_LockStatus,Current status of lock protection: 0 = inactive (unlock counter > 0) 1 = active (unlock counter == 0)." "0: inactive,1: active" group.long 0x3B1008++0xB line.long 0x0 "dispirq3_InterruptEnable0,Interrupt Enable register 0." hexmask.long 0x0 0.--31. 1. "dispirq3_InterruptEnable0,Same as InterruptEnable0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq3_InterruptEnable1,Interrupt Enable register 1." hexmask.long 0x4 0.--31. 1. "dispirq3_InterruptEnable1,Same as InterruptEnable1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq3_InterruptEnable2,Interrupt Enable register 2." hexmask.long.tbyte 0x8 0.--21. 1. "dispirq3_InterruptEnable2,Same as InterruptEnable2 except only effective for bits which are set in InterruptMask2." wgroup.long 0x3B1014++0x17 line.long 0x0 "dispirq3_InterruptPreset0,Interrupt Preset register 0" hexmask.long 0x0 0.--31. 1. "dispirq3_InterruptPreset0,Same as InterruptPreset0 except only effective for bits which are set in InterruptMask0." line.long 0x4 "dispirq3_InterruptPreset1,Interrupt Preset register 1" hexmask.long 0x4 0.--31. 1. "dispirq3_InterruptPreset1,Same as InterruptPreset1 except only effective for bits which are set in InterruptMask1." line.long 0x8 "dispirq3_InterruptPreset2,Interrupt Preset register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq3_InterruptPreset2,Same as InterruptPreset2 except only effective for bits which are set in InterruptMask2." line.long 0xC "dispirq3_InterruptClear0,Interrupt Clear register 0" hexmask.long 0xC 0.--31. 1. "dispirq3_InterruptClear0,Same as InterruptClear0 except only effective for bits which are set in InterruptMask0." line.long 0x10 "dispirq3_InterruptClear1,Interrupt Clear register 1" hexmask.long 0x10 0.--31. 1. "dispirq3_InterruptClear1,Same as InterruptClear1 except only effective for bits which are set in InterruptMask1." line.long 0x14 "dispirq3_InterruptClear2,Interrupt Clear register 2" hexmask.long.tbyte 0x14 0.--21. 1. "dispirq3_InterruptClear2,Same as InterruptClear2 except only effective for bits which are set in InterruptMask2." rgroup.long 0x3B102C++0xB line.long 0x0 "dispirq3_InterruptStatus0,Interrupt Status register 0" hexmask.long 0x0 0.--31. 1. "dispirq3_InterruptStatus0,Same as InterruptStatus0." line.long 0x4 "dispirq3_InterruptStatus1,Interrupt Status register 1" hexmask.long 0x4 0.--31. 1. "dispirq3_InterruptStatus1,Same as InterruptStatus1." line.long 0x8 "dispirq3_InterruptStatus2,Interrupt Status register 2" hexmask.long.tbyte 0x8 0.--21. 1. "dispirq3_InterruptStatus2,Same as InterruptStatus2." tree.end tree "DISPLAY_TCU" base ad:0x4B000000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0x810++0x7 line.long 0x0 "tcu_pixel_mst_test_mode,PIXEL LINK master test mode" bitfld.long 0x0 3. "pixel_mst_test_load,pixel link test load" "0,1" bitfld.long 0x0 2. "pixel_mst_test_start,pixel link test start" "0,1" bitfld.long 0x0 1. "pixel_mst1_test_mode,pixel loop test production mode" "0,1" bitfld.long 0x0 0. "pixel_mst0_test_mode,pixel loop test production mode" "0,1" line.long 0x4 "tcu_pixel_mst_test_input_,PIXEL LINK master test input" hexmask.long 0x4 0.--31. 1. "pixel_mst_test_input,pixel link test inputs" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 2. "tcu_fuse_obs_2,fuse observation" "0,1" rbitfld.long 0x0 1. "tcu_fuse_obs_1,fuse observation" "0,1" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree.end tree "DPHY_RX" base ad:0x4AC00000 group.byte 0x0++0xA line.byte 0x0 "testcode_x_reg,Testcode extension" hexmask.byte 0x0 4.--7. 1. "reserved_0,Unused" newline hexmask.byte 0x0 0.--3. 1. "testcode_x,Extends the testcode's MSB" line.byte 0x1 "RX_SYS_0,System configuration" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "hsfreqrange_ovr_en,HS frequency range of operation selection override" "0,1" newline hexmask.byte 0x1 1.--4. 1. "target_state,Target FSM state to which FSM will move when force_state = 1'b1 4'b0000: POWERDWN: Power Down 4'b0001: BGPON: Common block enable 4'b0010: CAL_TYPE: Termination Calibration Type 4'b0011: BURNIN_CAL: Termination Calibration without rext.." newline bitfld.byte 0x1 0. "force_state,Force FSM to move to target state" "0,1" line.byte 0x2 "RX_SYS_1,System configuration" bitfld.byte 0x2 7. "timebase_ovr_en,4us timebase override enable." "0,1" newline hexmask.byte 0x2 0.--6. 1. "hsfreqrange_ovr,HS frequency range of operation selection override" line.byte 0x3 "RX_SYS_2,System configuration" hexmask.byte 0x3 0.--7. 1. "timebase_ovr,4us timebase override." line.byte 0x4 "RX_SYS_3,System configuration" rbitfld.byte 0x4 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x4 5. "cmp_polarity,Comparator polarity" "0,1" newline bitfld.byte 0x4 4. "noext_burnin_res_cal,Selection between type of calibration (if 1 no REXT will be done)" "0,1" newline bitfld.byte 0x4 3. "hsdirect,Allows to set PHY in HS mode without going through LP states" "0,1" newline bitfld.byte 0x4 2. "reserved_1,Reserved field" "0,1" newline bitfld.byte 0x4 1. "thsexit_min_ovr_en,Ths-exit minimum time override enable" "0,1" newline bitfld.byte 0x4 0. "thsexit_min_ovr,Ths-exit minimum time override enable value" "0,1" line.byte 0x5 "RX_SYS_4,System configuration" rbitfld.byte 0x5 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x5 6. "hsrxtclkmisspd_ovr_en,Tclk-miss detection override enable." "0,1" newline bitfld.byte 0x5 5. "hsrxtclkmisspd_ovr,Tclk-miss detection override." "0,1" newline bitfld.byte 0x5 3.--4. "tclk_miss_opt,Allows optimization of Tclk-miss detection structure response" "0,1,2,3" newline bitfld.byte 0x5 0.--2. "number_of_ready_count,Latency of measurement of analog data for data lane offset cal after changing setting" "0,1,2,3,4,5,6,7" line.byte 0x6 "RX_SYS_5,System configuration" hexmask.byte 0x6 0.--7. 1. "offst_comp_threshold_7_0,1s 0s threshold to increase/decrease offset voltage setting" line.byte 0x7 "RX_SYS_6,System configuration" hexmask.byte 0x7 0.--7. 1. "tolerance,Tolerance of offset comparator threshold (register 0x76)" line.byte 0x8 "RX_SYS_7,System configuration" bitfld.byte 0x8 7. "tclk_miss_div2_ovr_en,Use divider by 2 on Tclk-miss detection circuit override." "0,1" newline bitfld.byte 0x8 6. "tclk_miss_div2_ovr,Use divider by 2 on Tclk-miss detection circuit override." "0,1" newline bitfld.byte 0x8 5. "deskew_polarity,De-skew Calibration pattern control (only used in backwards compatibility)" "0,1" newline bitfld.byte 0x8 3.--4. "deskew_latency,number of cycles 2'b00: 3 cycles 2'b01: 4 cycles 2'b10: 5 cycles 2'b11: 6 cycles" "0,1,2,3" newline rbitfld.byte 0x8 2. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x8 1. "skew_mux_sel,Selects between auto mode and manual selection of de-skew cal mechanism" "0,1" newline bitfld.byte 0x8 0. "skew_mux_run,Selects type of de-skew calibration mode to run (internal or burst based)" "0,1" line.byte 0x9 "RX_SYS_8,System configuration" bitfld.byte 0x9 7. "tafailsafez,Enable error contention detection in all LP modes" "0,1" newline bitfld.byte 0x9 5.--6. "aligner_dk_cnf,Used in the lane aligner to set the number of ones to identify in the deskew sync pattern." "0: Look for 8 + 0 ones,1: Look for 8 + 2 ones,2: Look for 8 + 4 ones,3: Look for 8 + 6 ones" newline bitfld.byte 0x9 4. "noalign_error,No alignment error bit" "0,1" newline bitfld.byte 0x9 2.--3. "deskew_jump2steps,De-skew Calibration steps control." "0: Jump 1 step at a time,1: Jump 2 step at a time,2: Jump 3 step at a time,3: Jump 4 step at a time" newline bitfld.byte 0x9 1. "deskew_overflow,Feature that forces de-skew algorithm convergence by setting 2nd edge pointer to step 31 (for situations where eventual DDL variation over PVT could cause potential failures)" "0,1" newline bitfld.byte 0x9 0. "deskew_numedges_update,Procedure Set deskew_nemedge_update to 1'b0; Change deskew_numedges to desired value; Set deskew_nemedge_update to 1'b1; Circuitry ensures synchronous update of internal counters" "0,1" line.byte 0xA "RX_SYS_9,System configuration" hexmask.byte 0xA 0.--7. 1. "deskew_numedges,De-skew accumulator size (sinusoidal jitter tolerance)" rgroup.byte 0x1E++0x3 line.byte 0x0 "RD_RX_SYS_0,System configuration observability" bitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "hsdirect_if,Direct HS indication (volatile)" "0,1" newline bitfld.byte 0x0 4. "cb_det_supply,Supply presence detection (volatile)" "0,1" newline hexmask.byte 0x0 0.--3. 1. "state_main,Main FSM state (volatile)" line.byte 0x1 "RD_RX_SYS_1,System configuration observability" bitfld.byte 0x1 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x1 0.--6. 1. "hsfreqrange,HS frequency range selected (volatile)" line.byte 0x2 "RD_RX_SYS_2,System configuration observability" hexmask.byte 0x2 0.--7. 1. "timebase_7_0,4us timebase (volatile)" line.byte 0x3 "RD_RX_SYS_3,System configuration observability" bitfld.byte 0x3 7. "ulpsactivenot_global,Global ULPS entry signal (from all lanes) (volatile)" "0,1" newline bitfld.byte 0x3 6. "txulpsexit_global,Global ULPS exit signal (from all lanes) (volatile)" "0,1" newline bitfld.byte 0x3 5. "cb_cal_en_ifpowerctrl,Output of main FSM signaling termination calibration enable (volatile)" "0,1" newline bitfld.byte 0x3 4. "lptxenpulldwn_ifpowerctrl,Main FSM's LP-TX pull down enable (volatile)" "0,1" newline bitfld.byte 0x3 3. "lptxdin_ifpowerctrl,Main FSM's LP-TX data in (volatile)" "0,1" newline bitfld.byte 0x3 2. "lptxena_ifpowerctrl,Main FSM's LP-TX driver enable (volatile)" "0,1" newline bitfld.byte 0x3 1. "lptxpon_ifpowerctrl,Main FSM's LP-TX driver power on (volatile)" "0,1" newline bitfld.byte 0x3 0. "bintpon_ifpowerctrl,Main FSM's level shifter power on (volatile)" "0,1" rgroup.byte 0x23++0x2 line.byte 0x0 "RD_CONT_DATA_0,IO continuity feature internal observability" hexmask.byte 0x0 0.--7. 1. "cont_data_7_0,top level cont_data[7:0] observability (volatile)" line.byte 0x1 "RD_CONT_DATA_1,IO continuity feature internal observability" hexmask.byte 0x1 3.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x1 0.--2. "cont_data_10_8,top level cont_data[10:8] observability (volatile)" "0,1,2,3,4,5,6,7" line.byte 0x2 "RD_RX_SYS_4,RX System signal observation" hexmask.byte 0x2 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0.--1. "rx_rxhs_prog_1_0,Analog programmability (volatile)" "0,1,2,3" group.byte 0x37++0x2 line.byte 0x0 "RX_SYS_DDL_0,DDL programmability" hexmask.byte 0x0 0.--7. 1. "rx_ddl_offst_error_7_0,bits [7:0]: RX DDL offset error" line.byte 0x1 "RX_SYS_DDL_1,DDL programmability" hexmask.byte 0x1 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x1 0.--3. 1. "rx_ddl_offst_error_11_8,bits [7:0]: RX DDL offset error" line.byte 0x2 "RX_SYS_DDL_2,DDL programmability" hexmask.byte 0x2 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0.--1. "rx_rxhs_ddl_clk_out_div,RX HS DDL output clock divider bits" "0,1,2,3" group.byte 0x4E++0xB line.byte 0x0 "RX_SYSTIMERS_0,System timers" hexmask.byte 0x0 0.--7. 1. "timeinitbg,Timer is loaded with value 10'bXXXXXXXX00" line.byte 0x1 "RX_SYSTIMERS_1,System timers" hexmask.byte 0x1 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x1 0.--1. "timeinitbg__9_8,Timer is loaded with value 10'bXXXXXXXX00" "0,1,2,3" line.byte 0x2 "RX_SYSTIMERS_2,System timers" rbitfld.byte 0x2 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline hexmask.byte 0x2 0.--5. 1. "ttago,Number of cycles that the TX drives the bridge state during a turnaround procedure" line.byte 0x3 "RX_SYSTIMERS_3,System timers" rbitfld.byte 0x3 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline hexmask.byte 0x3 0.--5. 1. "ttasure,Number of cycles that the RX waits after a bridge state has been detected during a turnaround procedure" line.byte 0x4 "RX_SYSTIMERS_4,System timers" rbitfld.byte 0x4 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline hexmask.byte 0x4 0.--5. 1. "ttawait,Number of cycles that the PHY waits for until a turnaround request is processed" line.byte 0x5 "RX_SYSTIMERS_5,System timers" hexmask.byte 0x5 0.--7. 1. "twakeupulpm,Timer is loaded with value 10'bXXXXXXXX11" line.byte 0x6 "RX_SYSTIMERS_6,System timers" hexmask.byte 0x6 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x6 0.--1. "twakeupulpm__9_8,Timer is loaded with value 10'bXXXXXXXX11" "0,1,2,3" line.byte 0x7 "RX_SYSTIMERS_7,System timers" hexmask.byte 0x7 0.--7. 1. "txdindlytime,Timer is loaded with value 10'bXXXXXXXX00" line.byte 0x8 "RX_SYSTIMERS_8,System timers" hexmask.byte 0x8 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x8 0.--1. "txdindlytime__9_8,Timer is loaded with value 10'bXXXXXXXX00" "0,1,2,3" line.byte 0x9 "RX_SYSTIMERS_9,System timers" hexmask.byte 0x9 0.--7. 1. "txstarttime,Timer is loaded with value 10'bXXXXXXXX00" line.byte 0xA "RX_SYSTIMERS_10,System timers" hexmask.byte 0xA 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0xA 0.--1. "txstarttime__9_8,Timer is loaded with value 10'bXXXXXXXX00" "0,1,2,3" line.byte 0xB "RX_SYSTIMERS_11,System timers" hexmask.byte 0xB 0.--7. 1. "rxpontime,Timer used in offset calibration for state machine power up." rgroup.byte 0x7A++0x0 line.byte 0x0 "RD_RX_SYSTIMERS_0,System timers" bitfld.byte 0x0 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x0 0.--6. 1. "hsrxthssettle_datalns,HS RX THSSettle Timing Counter (volatile)" rgroup.byte 0xC7++0x4 line.byte 0x0 "RD_RX_STARTUP_OBS_0,System startup observability" bitfld.byte 0x0 7. "hsrxpon_clkln_ifpowerctrl,Output of main FSM enabling clock lane HS receiver analog circuitry (volatile)" "0,1" newline bitfld.byte 0x0 6. "hsrxencal_lane_offst_ifpowerctrl,Output of main FSM enabling digital data lane offset calibration machine (volatile)" "0,1" newline bitfld.byte 0x0 5. "clk_en_lns,Clock enable lanes (volatile)" "0,1" newline bitfld.byte 0x0 4. "des_endataln_offst_cal_ifpwrctrl,Output of main FSM enabling feed of clock lane receivers with internal oscillator signal (volatile)" "0,1" newline bitfld.byte 0x0 3. "rxln_feed_int_clk_ifpowerctrl,Output of main FSM enabling feed of data lane receivers with internal oscillator signal (volatile)" "0,1" newline bitfld.byte 0x0 2. "rxclk_rxhs_feed_int_clk_if,Indicates the input to the HS-RX clock lane." "0: Signal from dp/dn.,1: Signal from internal clock." newline bitfld.byte 0x0 1. "rxclk_feed_int_clk_ifpowerctrl,Output of main FSM enabling feed of clock lane receivers with internal oscillator signal (volatile)" "0,1" newline bitfld.byte 0x0 0. "burnin_cal_en_if,Burnin oscillator enable signal (volatile)" "0,1" line.byte 0x1 "RD_RX_STARTUP_OBS_1,System startup observability" bitfld.byte 0x1 7. "skew_back_comp_en,de-skew backwards compatibility observation (volatile)" "0,1" newline bitfld.byte 0x1 6. "skew_back_comp_en_ifpowerctrl,Output of main FSM signalling backwards compatibility de-skew compensation enable (volatile)" "0,1" newline bitfld.byte 0x1 5. "perform_skew,Internal signaling to distinguish de-skew calibration through internal oscillator or external burst training sequence (1 if compatibility mode) (volatile)" "0,1" newline bitfld.byte 0x1 4. "rx_rxhs_compatibility_mode,compatibility mode observation (volatile)" "0,1" newline bitfld.byte 0x1 3. "global_ddltunning_done,Flag indicating that the DDL calibrations for all the active lanes are finished (volatile)" "0,1" newline bitfld.byte 0x1 2. "ddltunning_en_ifpowerctrl,Output of main FSM enabling DDL calibration (volatile)" "0,1" newline bitfld.byte 0x1 1. "global_offst_cal_done,Flag indicating that the offset calibration for all the active lanes are finished (volatile)" "0,1" newline bitfld.byte 0x1 0. "hsrxpon_dataln_ifpowerctrl,Output of main FSM enabling data lane HS receiver analog circuitry (volatile)" "0,1" line.byte 0x2 "RD_RX_STARTUP_OBS_2,System startup observability" bitfld.byte 0x2 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x2 5. "deskew_legacyz,De-skew algorithm currently enabled (1'b0 for backwards compatibility) (volatile)" "0,1" newline bitfld.byte 0x2 4. "enable_lns,Lanes enable observation (volatile)" "0,1" newline bitfld.byte 0x2 2.--3. "rx_rxhs_gmode_1_0,RX HS gmode observation (volatile)" "0,1,2,3" newline bitfld.byte 0x2 1. "align_error,No alignment error bit" "0,1" newline bitfld.byte 0x2 0. "global_skew_cal_done,Flag indicating that the de-skew calibrations for all the active lanes are finished (volatile)" "0,1" line.byte 0x3 "RD_RX_STARTUP_OBS_3,System startup observability" hexmask.byte 0x3 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x3 0.--3. 1. "counter_for_des_en_if,Observation of the counter needed to meet GTP ( min and max clocklane settle time) (volatile)" line.byte 0x4 "RD_RX_STARTUP_OBS_4,System startup observability" bitfld.byte 0x4 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x4 0.--6. 1. "hsfreqrange_top,hsfreqrange observation after mux override (volatile)" group.byte 0xE0++0x5 line.byte 0x0 "RX_STARTUP_OVR_0,System startup observability" bitfld.byte 0x0 7. "rx_rxhs_compatibility_mode_ovr_en,compatibility mode override enable" "0,1" newline bitfld.byte 0x0 6. "bypass_skew_machine,Bypass of de-skew machine" "0,1" newline bitfld.byte 0x0 5. "skew_back_comp_en_ovr,De-skew backwards compatibility override enable value." "0,1" newline bitfld.byte 0x0 4. "skew_back_comp_en_ovr_en,De-skew backwards compatibility override enable control." "0,1" newline bitfld.byte 0x0 3. "bypass_ddltunning_machine,Bypass DDL tunning machine" "0,1" newline bitfld.byte 0x0 2. "bypass_offst_machine,Bypass offset machine bit" "0,1" newline bitfld.byte 0x0 1. "clk_en_lns_tester,Clock enable lanes for tester." "0,1" newline bitfld.byte 0x0 0. "clk_en_lns_bypass,Clock enable lanes bypass" "0,1" line.byte 0x1 "RX_STARTUP_OVR_1,System startup override" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "deskew_legacyz_ovr_en,De-skew algorithm override enable." "0,1" newline bitfld.byte 0x1 4. "deskew_legacyz_ovr,De-skew algorithm override (requires deskew_legacyz_ovr_en = 1'b1)." "0,1" newline bitfld.byte 0x1 3. "enable_lns_ovr,Lanes enable override (requires enable_lanes_ovr_e = 1'b1)" "0,1" newline bitfld.byte 0x1 2. "enable_lns_ovr_en,Lanes enable override enable" "0,1" newline bitfld.byte 0x1 1. "rxclk_rxhs_ddr_clk_en_bypass,HS RX DDR clock enable bypass control" "0,1" newline bitfld.byte 0x1 0. "rx_rxhs_compatibility_mode_ovr,compatibility mode override value (needs rx_rxhs_compatibility_mode_ovr_en = 1'b1)" "0,1" line.byte 0x2 "RX_STARTUP_OVR_2,System startup override" hexmask.byte 0x2 0.--7. 1. "ddl_osc_freq_target_ovr__7_0,DDL oscillation frequency override value ( Main )." line.byte 0x3 "RX_STARTUP_OVR_3,System startup override" hexmask.byte 0x3 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x3 0.--3. 1. "ddl_osc_freq_target_ovr__11_8,DDL oscillation frequency override value ( Main )." line.byte 0x4 "RX_STARTUP_OVR_4,System startup override" hexmask.byte 0x4 4.--7. 1. "counter_for_des_en_config_if,Override value of the counter used to meet the min and max clocklane settle time" newline bitfld.byte 0x4 2.--3. "rx_rxhs_gmode_if_ovr,RX HS gmode override value" "0,1,2,3" newline bitfld.byte 0x4 1. "rx_rxhs_gmode_if_ovr_en,RX HS gmode override enable control" "0,1" newline bitfld.byte 0x4 0. "ddl_osc_freq_target_ovr_en,DDL oscillation frequency override enable" "0,1" line.byte 0x5 "RX_STARTUP_OVR_5,System startup override" hexmask.byte 0x5 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x5 0. "counter_for_des_en_bypass,Override value of the counter used to meet the min and max clocklane settle time" "0,1" group.byte 0xF1++0x0 line.byte 0x0 "RX_STARTUP_OVR_17,System startup override" bitfld.byte 0x0 7. "hsrxthssettle_ovr_en_datalns,HS_SETTLE timer override enable for datalanes" "0,1" newline hexmask.byte 0x0 0.--6. 1. "hsrxthssettle_datalns_ovr,HS_SETTLE timer override value for datalanes" group.byte 0x107++0x2 line.byte 0x0 "RX_BIST_0,Data pattern generator configuration" hexmask.byte 0x0 4.--7. 1. "pg_mode_r,Pattern Generator modes selection" newline bitfld.byte 0x0 3. "pg_bist_error,Automatic error insertion control for the pattern generator" "0,1" newline bitfld.byte 0x0 2. "pg_data_polarity,Allows inversion of pattern generator's output data (for dp/dn swap)" "0,1" newline bitfld.byte 0x0 1. "pg_data_swap,Allows reordering of pattern generator's output data ([7:0] -> [0:7])" "0,1" newline bitfld.byte 0x0 0. "pg_reg_err_r,Trigger for Pattern generator error insertion" "0,1" line.byte 0x1 "RX_BIST_1,Data pattern generator configuration" hexmask.byte 0x1 0.--7. 1. "pg_usert_pat,Pattern Generator User Defined Data Control" line.byte 0x2 "RX_BIST_2,Clock pattern generator configuration" hexmask.byte 0x2 0.--7. 1. "rxclk_lbck_data_if,Clock pattern to be serialized (BIST requires a square wave clock pattern)" group.byte 0x113++0x1 line.byte 0x0 "RX_BIST_OVR_3,Miscellaneous override control" bitfld.byte 0x0 7. "rx_rxhs_prog_ovr_en,AFE internal clock routing attachment to receiver override enable." "0,1" newline bitfld.byte 0x0 5.--6. "rx_rxhs_prog_ovr,bit [1] is unused and should be considered reserved." "0,1,2,3" newline bitfld.byte 0x0 4. "rxclk_lb_sel_ovr_en,Analog loopback multiplexer override enable." "0,1" newline bitfld.byte 0x0 3. "rxclk_lb_sel_ovr,Analog loopback multiplexer override" "0,1" newline bitfld.byte 0x0 2. "fsm_trigger_ovr_en,PLL boot completed flag override enable." "0,1" newline bitfld.byte 0x0 1. "fsm_trigger_ovr,PLL boot completed flag override. Used to bypass PLL boot sequence of BIST machine." "0,1" newline bitfld.byte 0x0 0. "del_dataln_ovr_en,Serializer timer override enable." "0,1" line.byte 0x1 "RX_BIST_PIPE_TIMER,Configuration timer for pipe clean while performing BIST" hexmask.byte 0x1 0.--7. 1. "pipe_clean_time,Timer set in pulses of cfg_clk." rgroup.byte 0x11E++0x1 line.byte 0x0 "RD_RX_BIST_0,BIST related observability" bitfld.byte 0x0 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x0 6. "rx3_error_latch_if,Lane 3 error indication (volatile)" "0,1" newline bitfld.byte 0x0 5. "rx2_error_latch_if,Lane 2 error indication (volatile)" "0,1" newline bitfld.byte 0x0 4. "rx1_error_latch_if,Lane 1 error indication (volatile)" "0,1" newline bitfld.byte 0x0 3. "rx0_error_latch_if,Lane 0 error indication (volatile)" "0,1" newline bitfld.byte 0x0 2. "pg_sel,Indication that Pattern Generator is enabled (volatile)" "0,1" newline bitfld.byte 0x0 1. "pg_pat_strobe,Indication that a PRBS complete run has occurred (volatile)" "0,1" newline bitfld.byte 0x0 0. "biston_lns,Indication of bist enable to core (volatile)" "0,1" line.byte 0x1 "RD_RX_BIST_1,BIST related observability" bitfld.byte 0x1 7. "rxclk_lbck_clk_en_if,Clock serializer divider reset (volatile)" "0,1" newline bitfld.byte 0x1 6. "rxclk_lbck_div_en_if,Clock serializer divider enable (volatile)" "0,1" newline bitfld.byte 0x1 5. "rxclk_lbck_serial_clk_en_if,Clock serializer clock enable (volatile)" "0,1" newline bitfld.byte 0x1 4. "rxclk_lbck_serial_en_if,Clock serializer enable (volatile)" "0,1" newline bitfld.byte 0x1 3. "rxclk_lbdata_clk_en_if,Data serializer divider reset (volatile)" "0,1" newline bitfld.byte 0x1 2. "rxclk_lbdata_div_en_if,Data serializer divider enable (volatile)" "0,1" newline bitfld.byte 0x1 1. "rxclk_lbdata_serial_clk_en_if,Data serializer clock enable (volatile)" "0,1" newline bitfld.byte 0x1 0. "rxclk_lbdata_serial_en_if,Data serializer enable (volatile)" "0,1" group.byte 0x133++0x0 line.byte 0x0 "RX_DUAL_PHY_0,TX dual PHY control" hexmask.byte 0x0 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 0. "mastermacro,PHY which has its own clock lane enabled should set this field to 1'b1 (master PHY)" "0,1" rgroup.byte 0x148++0x2 line.byte 0x0 "RD_RX_DUAL_PHY_0,RX dual PHY observability" bitfld.byte 0x0 7. "rxclk_rxhs_rx_en_in,Input rxclk_rxhs_rx_en_in of slave PHY should be connected to output rxclk_rxhs_rx_en_out of master PHY" "0,1" newline bitfld.byte 0x0 6. "rxclk_rxhs_rx_en_out,Output rxclk_rxhs_rx_en_out of master PHY should be connected to input rxclk_rxhs_rx_en_out of master PHY" "0,1" newline bitfld.byte 0x0 5. "rxclk_rxhs_rx_pon_in,Input rxclk_rxhs_rx_pon_in of slave PHY should be connected to output rxclk_rxhs_rx_pon_out of master PHY" "0,1" newline bitfld.byte 0x0 4. "rxclk_rxhs_rx_pon_out,Output rxclk_rxhs_rx_pon_out of master PHY should be connected to input rxclk_rxhs_rx_pon_out of master PHY" "0,1" newline bitfld.byte 0x0 3. "rxclk_rxhs_rx_enlogic_in,Input rxclk_rxhs_rx_enlogic_in of slave PHY should be connected to output rxclk_rxhs_rx_enlogic_out of master PHY" "0,1" newline bitfld.byte 0x0 2. "rxclk_rxhs_rx_enlogic_out,Output rxclk_rxhs_rx_enlogic_out of master PHY should be connected to input rxclk_rxhs_rx_enlogic_out of master PHY" "0,1" newline bitfld.byte 0x0 1. "rxclk_rxhs_clk_en_in,Input rxclk_rxhs_clk_en_in of slave PHY should be connected to output rxclk_rxhs_clk_en_out of master PHY" "0,1" newline bitfld.byte 0x0 0. "rxclk_rxhs_clk_en_out,Output rxclk_rxhs_clk_en_out of master PHY should be connected to input rxclk_rxhs_clk_en_out of master PHY" "0,1" line.byte 0x1 "RD_RX_DUAL_PHY_1,RX dual PHY observability" bitfld.byte 0x1 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x1 6. "rxclk_rxhs_feed_int_clk_in,Input rxclk_rxhs_feed_int_clk_in of slave PHY should be connected to output rxclk_rxhs_feed_int_clk_out of master PHY" "0,1" newline bitfld.byte 0x1 5. "rxclk_rxhs_feed_int_clk_out,Output rxclk_rxhs_feed_int_clk_out of master PHY should be connected to input rxclk_rxhs_feed_int_clk_out of master PHY" "0,1" newline bitfld.byte 0x1 3.--4. "rx_rxhs_prog_in_1_0,Input rx_rxhs_prog_in of slave PHY should be connected to output rx_rxhs_prog_out of master PHY" "0,1,2,3" newline bitfld.byte 0x1 1.--2. "rx_rxhs_prog_out_1_0,Output rx_rxhs_prog_out of master PHY should be connected to input rx_rxhs_prog_out of master PHY" "0,1,2,3" newline bitfld.byte 0x1 0. "ulpsactivenotclk_in,Input ulpsactivenotclk_in of slave PHY should be connected to output ulpsactivenotclk of master PHY" "0,1" line.byte 0x2 "RD_RX_DUAL_PHY_2,RX dual PHY observability" hexmask.byte 0x2 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 1. "launch_des_en_in,Input launch_des_en_in of slave PHY should be connected to output launch_des_en_out of master PHY" "0,1" newline bitfld.byte 0x2 0. "launch_des_en_out,Output launch_des_en_out of master PHY should be connected to input launch_des_en_out of master PHY" "0,1" group.byte 0x16F++0x0 line.byte 0x0 "RX_PLL_18,PLL control" hexmask.byte 0x0 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 1. "pll_reset_ovr,PLL reset override" "0,1" newline bitfld.byte 0x0 0. "pll_reset_ovr_en,PLL reset override enable" "0,1" group.byte 0x1AA++0x6 line.byte 0x0 "RX_CB_0,Common block control" rbitfld.byte 0x0 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x0 5.--6. "cb_sel_vrefcd_lprx,LPRX contention detector voltage reference selection: 00 : 275mV 01 : 300mV 10 : 325mV 11 : 350mV" "0,1,2,3" newline bitfld.byte 0x0 2.--4. "cb_sel_v400_prog,Select value of cb_v400 1XX : 400mV 011 : 450mV 010 : 350mV 001 : 300mV 000 : 200mV" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x0 1. "cb_sel_chop_clk,Select bandgap clock source: 0 : Internal oscillator (internal clk source) 1 : External clock signal (cb_chop_clk)" "0: Internal oscillator,1: External clock signal" newline bitfld.byte 0x0 0. "cb_chop_clk_en,Bandgap chop clock enable 0 : Chop clock gated 1 : Chop clock switching" "0: Chop clock gated,1: Chop clock switching" line.byte 0x1 "RX_CB_1,Common block control" rbitfld.byte 0x1 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x1 6. "cb_atb_vbe_sel,VBe selection to Analog Test Bus" "0,1" newline bitfld.byte 0x1 3.--5. "txlp_prog,LP-TX programmability" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 2. "cb_sel_vreflptx_prog,LPTX voltage reference selection: 0 : 1100mV 1 : 1200mV" "0,1" newline bitfld.byte 0x1 0.--1. "cb_sel_vref_lprx,LPRX voltage reference selection: 00 : 600mV 01 : 625mV 10 : 650mV 11 : 675mV" "0,1,2,3" line.byte 0x2 "RX_CB_2,Common block control" rbitfld.byte 0x2 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x2 6. "rx_rxlp_bias_prog,LP-RX biasing control" "0,1" newline bitfld.byte 0x2 4.--5. "reserved_1,Reserved field" "0,1,2,3" newline bitfld.byte 0x2 3. "rx_cb_pre_iref_on,common block reference current control" "0,1" newline bitfld.byte 0x2 2. "cb_atb_ext_con,allows direct connecting ATB line into ATB pin: 0 : disable 1 : enable" "0: disable,1: enable" newline bitfld.byte 0x2 0.--1. "cb_atb_sel,Analog Test Bus selection: cb_atb_sel[1]: 0 : ATB LINE (atb_line) 1 : External resistors cb_atb_sel[0]: 0 : DAC 1 : TX/RX replica" "0: DAC,1: TX/RX replica,?,?" line.byte 0x3 "RX_CB_3,Common block control" bitfld.byte 0x3 7. "cb_lpibias_en_ovr_en,Override Enable voltage control to LPTX and currents for LPTX LPRX" "0,1" newline bitfld.byte 0x3 6. "cb_bg_en_ovr,Bandgap enable override" "0,1" newline bitfld.byte 0x3 5. "cb_bg_en_ovr_en,Bandgap enable override" "0,1" newline bitfld.byte 0x3 4. "cb_atb_comp_clk_ovr,Clock used in analog comparator override" "0,1" newline bitfld.byte 0x3 3. "cb_atb_comp_clk_ovr_en,Clock used in analog comparator override" "0,1" newline bitfld.byte 0x3 0.--2. "cb_vref_mpll_reg_sel,PLL reference voltage control" "0,1,2,3,4,5,6,7" line.byte 0x4 "RX_CB_4,Common block control" bitfld.byte 0x4 7. "cb_atb_on_ovr_en,Analog Test Bus enable override" "0,1" newline hexmask.byte 0x4 3.--6. 1. "reserved_0,Reserved field" newline bitfld.byte 0x4 2. "cb_on_ovr,Common Block power on override control" "0,1" newline bitfld.byte 0x4 1. "cb_on_ovr_en,Common Block power on override control" "0,1" newline bitfld.byte 0x4 0. "cb_lpibias_en_ovr,Override Enable voltage control to LPTX and currents for LPTX LPRX" "0,1" line.byte 0x5 "RX_CB_5,Common block control" hexmask.byte 0x5 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x5 0. "cb_atb_on_ovr,Analog Test Bus enable override" "0,1" line.byte 0x6 "RX_CB_6,Common block control" rbitfld.byte 0x6 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x6 4. "rx_cb_lb_en_rext_if,Static termination driver test REXT enable" "0,1" newline bitfld.byte 0x6 1.--3. "rx_cb_lb_setrx_if,comparator threshold (resistance mismatch to REXT) : 3'b111: -20% : 3'b011: -15% : 3'b101: -10% : 3'b001: -5% : 3'b110: 5% : 3'b010: 10% : 3'b100: 15% : 3'b000: 20%" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x6 0. "rx_cb_ibias_en_if,Enable currents for LP-TX LP-RX and HS-RX" "0,1" rgroup.byte 0x1C4++0x0 line.byte 0x0 "RD_RX_ANA_CB_0,Common block observability" bitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "cb_on,Common block level shifter enable (volatile)" "0,1" newline bitfld.byte 0x0 4. "cb_lpibias_en,Enable voltage currents for LP-TX and LP-RX (volatile)" "0,1" newline bitfld.byte 0x0 3. "cb_ical_x4,Programmable current for external resistor calibration (volatile)" "0,1" newline bitfld.byte 0x0 2. "cb_bg_en,Bandgap enable (volatile)" "0,1" newline bitfld.byte 0x0 1. "cb_atb_on,Analog test bus enable (volatile)" "0,1" newline bitfld.byte 0x0 0. "cb_atb_comp_clk,Analog test bus comparator clock (volatile)" "0,1" group.byte 0x1DA++0x3 line.byte 0x0 "RX_DAC_0,DAC/ADC control" hexmask.byte 0x0 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 1. "adc_done_clear,Clears last ADC procedure status" "0,1" newline bitfld.byte 0x0 0. "adc_en,ADC enable triggers ADC conversion" "0,1" line.byte 0x1 "RX_DAC_1,DAC/ADC control" hexmask.byte 0x1 0.--7. 1. "cb_dac_prog_ovr,Digital word to be translated to analog voltage override" line.byte 0x2 "RX_DAC_2,DAC/ADC control" hexmask.byte 0x2 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0.--1. "cb_dac_prog_ovr__9_8,Digital word to be translated to analog voltage override" "0,1,2,3" line.byte 0x3 "RX_DAC_3,DAC/ADC control" hexmask.byte 0x3 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x3 0. "cb_dac_prog_ovr_en,Digital word to be translated to analog voltage override enable" "0,1" rgroup.byte 0x1F2++0x2 line.byte 0x0 "RD_RX_DAC_0,DAC/ADC observability" hexmask.byte 0x0 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 0. "adc_done,Done flag for observation in ADC machine (volatile)" "0,1" line.byte 0x1 "RD_RX_DAC_1,DAC/ADC observability" hexmask.byte 0x1 0.--7. 1. "cb_dac_prog_7_0,ADC digital word representing analog voltage SAR algorithm result (volatile)" line.byte 0x2 "RD_RX_DAC_2,DAC/ADC observability" hexmask.byte 0x2 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0.--1. "cb_dac_prog_9_8,ADC digital word representing analog voltage SAR algorithm result (volatile)" "0,1,2,3" group.byte 0x209++0x2 line.byte 0x0 "RX_TERM_CAL_0,Termination calibration control" hexmask.byte 0x0 4.--7. 1. "cb_cal_repl_ovr,Calibration word for termination lower section override" newline rbitfld.byte 0x0 2.--3. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 1. "cb_cal_en_ovr,Allow to override the lower part termination control" "0,1" newline bitfld.byte 0x0 0. "cb_cal_en_ovr_en,Allow to override the lower part termination control" "0,1" line.byte 0x1 "RX_TERM_CAL_1,Termination calibration control" bitfld.byte 0x1 7. "cb_en_45_ohm,Selection for 45ohm termination impedance" "0,1" newline hexmask.byte 0x1 1.--6. 1. "reserved_0,Reserved field" newline bitfld.byte 0x1 0. "cb_cal_repl_ovr_en,Calibration word for termination lower section replica override enable" "0,1" line.byte 0x2 "RX_TERM_CAL_2,Termination calibration control" hexmask.byte 0x2 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 1. "cb_ical_x4_ovr,Programming current for termination calibration algorithm override" "0,1" newline bitfld.byte 0x2 0. "cb_ical_x4_ovr_en,Programming current for termination calibration algorithm override" "0,1" rgroup.byte 0x220++0x2 line.byte 0x0 "RD_RX_TERM_CAL_0,Termination calibration observability" bitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline hexmask.byte 0x0 2.--5. 1. "cb_cal_repl,Termination lower section replica setting (volatile)" newline bitfld.byte 0x0 1. "reserved_1,Reserved field (volatile)" "0,1" newline bitfld.byte 0x0 0. "cb_cal_en,Termination lower section analog circuitry enable (volatile)" "0,1" line.byte 0x1 "RD_RX_TERM_CAL_1,Termination calibration observability" bitfld.byte 0x1 7. "rescal_done,Lower section termination calibration algorithm done (volatile)" "0,1" newline bitfld.byte 0x1 6. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x1 5. "rescal_en,Lower section termination calibration algorithm enable (volatile)" "0,1" newline bitfld.byte 0x1 4. "cb_comp_out,Analog comparator output (volatile)" "0,1" newline hexmask.byte 0x1 0.--3. 1. "reserved_1,Reserved field (volatile)" line.byte 0x2 "RD_RX_TERM_CAL_2,Termination calibration observability" hexmask.byte 0x2 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0. "rescal_error,Termination lower section calibration algorithm error (volatile)" "0,1" group.byte 0x237++0x6 line.byte 0x0 "RX_NOREXTTUNE_0,Termination calibration without external resistor control" hexmask.byte 0x0 0.--7. 1. "count_ref,Termination calibration without REXT decision threshold (to increase/decrease resistance)" line.byte 0x1 "RX_NOREXTTUNE_1,Termination calibration without external resistor control" hexmask.byte 0x1 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x1 0.--1. "count_ref__9_8,Termination calibration without REXT decision threshold (to increase/decrease resistance)" "0,1,2,3" line.byte 0x2 "RX_NOREXTTUNE_2,Termination calibration without external resistor control" hexmask.byte 0x2 4.--7. 1. "setr_min,Termination calibration without REXT minimum oscillation threshold" newline hexmask.byte 0x2 0.--3. 1. "setr_max,Termination calibration without REXT maximum oscillation threshold" line.byte 0x3 "RX_NOREXTTUNE_3,Termination calibration without external resistor control" hexmask.byte 0x3 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x3 0.--3. 1. "setr_typ,Termination calibration without REXT typical oscillation threshold" line.byte 0x4 "RX_NOREXTTUNE_4,Termination calibration without external resistor control" hexmask.byte 0x4 0.--7. 1. "stability_time,Additional stability time for internal oscillator used for termination calibration without REXT" line.byte 0x5 "RX_NOREXTTUNE_5,Termination calibration without external resistor control" bitfld.byte 0x5 5.--7. "rx_rxhs_setr_ovr,Termination calibration word override (needs rx_rxhs_setr_ovr_en = 1'b1)" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x5 4. "rx_rxhs_setr_ovr_en,Termination calibration word override enable" "0,1" newline bitfld.byte 0x5 3. "rxclk_rxhs_osc_res_en_ovr,Oscillator mode (poly/MOS) to analog circuitry override" "0,1" newline bitfld.byte 0x5 2. "rxclk_rxhs_osc_res_en_ovr_en,Oscillator mode (poly/MOS) to analog circuitry override enable" "0,1" newline bitfld.byte 0x5 1. "rxclk_rxhs_osc_pon_ovr,Oscillator power-on override" "0,1" newline bitfld.byte 0x5 0. "rxclk_rxhs_osc_pon_ovr_en,Oscillator power-on override enable" "0,1" line.byte 0x6 "RX_NOREXTTUNE_6,Termination calibration without external resistor control" hexmask.byte 0x6 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x6 3. "burnin_cal_en_ovr,Burnin oscillator setting override value (needs burnin_cal_en_ovr_en = 1'b1)" "0,1" newline bitfld.byte 0x6 2. "burnin_cal_en_ovr_en,Burnin oscillator setting override value (needs burnin_cal_en_ovr_en = 1'b1)" "0,1" newline bitfld.byte 0x6 1. "norexttune_done_ovr,Termination calibration (without external reference resistor) override control" "0,1" newline bitfld.byte 0x6 0. "norexttune_done_ovr_en,Termination calibration (without external reference resistor) override control" "0,1" rgroup.byte 0x252++0x4 line.byte 0x0 "RD_RX_NOREXTTUNE_0,Termination calibration without external resistor observability" hexmask.byte 0x0 0.--7. 1. "count_osc0_7_0,Counter Oscillator (volatile)" line.byte 0x1 "RD_RX_NOREXTTUNE_1,Termination calibration without external resistor observability" hexmask.byte 0x1 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x1 0.--1. "count_osc0_9_8,Counter Oscillator (volatile)" "0,1,2,3" line.byte 0x2 "RD_RX_NOREXTTUNE_2,Termination calibration without external resistor observability" hexmask.byte 0x2 0.--7. 1. "count_osc1_7_0,Counter oscillator (volatile)" line.byte 0x3 "RD_RX_NOREXTTUNE_3,Termination calibration without external resistor observability" bitfld.byte 0x3 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline hexmask.byte 0x3 2.--5. 1. "setr_burnin,NOREXT calibration result word (volatile)" newline bitfld.byte 0x3 0.--1. "count_osc1_9_8,Counter oscillator (volatile)" "0,1,2,3" line.byte 0x4 "RD_RX_NOREXTTUNE_4,Termination calibration without external resistor observability" bitfld.byte 0x4 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x4 6. "noext_burn_error,Termination calibration without external resistor error (volatile)" "0,1" newline bitfld.byte 0x4 5. "norexttune_done,Termination calibration without external resistor done (volatile)" "0,1" newline bitfld.byte 0x4 2.--4. "rx_rxhs_setr_2_0,Termination setting (volatile)" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x4 1. "rxclk_rxhs_osc_res_en,Burn-in oscillator mode enable (volatile)" "0,1" newline bitfld.byte 0x4 0. "rxclk_rxhs_osc_pon,Burn-in oscillator power on (volatile)" "0,1" group.byte 0x301++0x1 line.byte 0x0 "RX_CLKLN_LN_0,Clock lane control" bitfld.byte 0x0 7. "hsrx_en_bypass_clkln,Clock lane HS receiver override enable" "0,1" newline bitfld.byte 0x0 6. "bintpon_clkln,Bias block power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x0 5. "bintpon_bypass_clkln,Bias block power-on bypass override" "0,1" newline hexmask.byte 0x0 1.--4. 1. "atb_sel_clkln,Analog Test Bus signals selection: 000: disconnected 001: vp 010: vpclk 011: gd 100: Voltage steering termination switches" newline rbitfld.byte 0x0 0. "reserved_0,Reserved field" "0,1" line.byte 0x1 "RX_CLKLN_LN_1,Clock lane control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "hsrxpon_if_clkln,Power on of RX HS" "0,1" newline bitfld.byte 0x1 3. "hsrxpon_bypass_clkln,Power on of RX HS bypass bit" "0,1" newline bitfld.byte 0x1 2. "hsrxenterm_if_clkln,RX HS enable term bit" "0,1" newline bitfld.byte 0x1 1. "hsrxenterm_bypass_clkln,RX HS enable term bypass bit" "0,1" newline bitfld.byte 0x1 0. "hsrx_en_if_clkln_tester,HS RX clock lane enable" "0,1" group.byte 0x304++0x1 line.byte 0x0 "RX_CLKLN_LN_3,Clock lane control" bitfld.byte 0x0 7. "lprxponcd_bypass_clkln,Power on the low power contention detector receiver bypass control" "0,1" newline hexmask.byte 0x0 0.--6. 1. "reserved_0,Reserved field" line.byte 0x1 "RX_CLKLN_LN_4,Clock lane control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "lprxponulp_clkln,Power on of ULP mode" "0,1" newline bitfld.byte 0x1 3. "lprxponulp_bypass_clkln,Power on of ULP mode of bypass control" "0,1" newline bitfld.byte 0x1 2. "lprxponlp_clkln,Power on of the low power receiver" "0,1" newline bitfld.byte 0x1 1. "lprxponlp_bypass_clkln,Power on of the low power receiver bypass control" "0,1" newline bitfld.byte 0x1 0. "lprxponcd_clkln,Power on the low power contention detector receiver" "0,1" group.byte 0x307++0x2 line.byte 0x0 "RX_CLKLN_LN_6,Clock lane control" bitfld.byte 0x0 7. "rxclk_rxhs_pull_long_channel_if,RX HS pull long channel" "0: Lines in Hi-Z.,1: Lines pulled to known voltage." newline bitfld.byte 0x0 6. "rxclk_rxhs_int_clk_sel,RX HS internal clock selection" "0,1" newline bitfld.byte 0x0 5. "rxclk_rxhs_feed_int_clk_ovr_en,RX HS source data override enable control" "0,1" newline bitfld.byte 0x0 4. "rxclk_rxhs_feed_int_clk_ovr,RX HS source data override" "0: Use the signal from dp/dn.,1: Use the signal from internal clock." newline bitfld.byte 0x0 3. "rxclk_rxhs_ddr_clk_en_if,RX HS DDR clock enable" "0,1" newline bitfld.byte 0x0 2. "rxclk_rxhs_clk_to_long_channel_if,RX HS clock to long channel bits" "0,1" newline rbitfld.byte 0x0 1. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x0 0. "polarity_clkln,Clock lane dp/dn swap. Active high" "0,1" line.byte 0x1 "RX_CLKLN_LN_7,Clock lane control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "rxclk_rxhs_rx_en200mode_if,Clock lane's 200 ohm differential termination enable control" "0,1" newline bitfld.byte 0x1 3. "rxclk_rxhs_ddr_clk_sel_if,DDR clock lane source selection control (internal or external through long channel)" "0,1" newline bitfld.byte 0x1 1.--2. "rxclk_rxhs_ddr_clk_div_ovr,Clock lane's DDR clock division factor override" "0,1,2,3" newline bitfld.byte 0x1 0. "rxclk_rxhs_ddr_clk_div_ovr_en,Clock lane's DDR clock division factor override enable" "0,1" line.byte 0x2 "RX_CLKLN_LN_8,Clock lane termination test control" rbitfld.byte 0x2 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x2 3.--6. 1. "rxclk_lb_prog_if,clock lane receiver biasing currents" newline bitfld.byte 0x2 2. "rxclk_lb_res_cm_en_if,clock lane static termination driver middle point pull down enable" "0,1" newline bitfld.byte 0x2 1. "rxclk_lb_res_dn_en_if,clock lane static termination driver test dn line enable" "0,1" newline bitfld.byte 0x2 0. "rxclk_lb_res_dp_en_if,clock lane static termination driver test dp line enable" "0,1" rgroup.byte 0x32B++0x3 line.byte 0x0 "RD_RX_CLKLN_LN_0,Clock lane observability" bitfld.byte 0x0 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x0 5.--6. "lprxdoutlp_clkln_if_1_0,LP-RX receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x0 3.--4. "lprxdoutcd_clkln_if_1_0,LP-CD receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x0 2. "hsrx_en_if_clkln,HS RX clock lane enable (volatile)" "0,1" newline bitfld.byte 0x0 1. "enable_clkln,Enable signal for clock lane (volatile)" "0,1" newline bitfld.byte 0x0 0. "bintpon_if_clkln,Bias block power-on override enable (volatile)" "0,1" line.byte 0x1 "RD_RX_CLKLN_LN_1,Clock lane observability" hexmask.byte 0x1 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x1 0.--1. "lprxdoutulp_clkln_if_1_0,Low power RX ULP output data (volatile)" "0,1,2,3" line.byte 0x2 "RD_RX_CLKLN_LN_2,Clock lane observability" bitfld.byte 0x2 7. "rxclk_rxhs_rx_enterm_if,Clock lane HS termination enable (volatile)" "0,1" newline bitfld.byte 0x2 6. "rxclk_rxhs_rx_enlogic_if,Clock lane level shifter enable (volatile)" "0,1" newline bitfld.byte 0x2 5. "rxclk_rxhs_rx_en_if,Clock lane HS receiver enable (volatile)" "0,1" newline bitfld.byte 0x2 4. "rxclk_rxhs_osc_out_if,Internal burnin oscillator clock (volatile)" "0,1" newline bitfld.byte 0x2 3. "rxclk_rxhs_ddr_clk_if,Clock lane's divided DDR clock (volatile)" "0,1" newline bitfld.byte 0x2 1.--2. "rxclk_rxhs_ddr_clk_div_1_0,DDR clock division ratio (volatile)" "0,1,2,3" newline bitfld.byte 0x2 0. "lsrxclk_clkln,Low power clock lane clock (volatile)" "0,1" line.byte 0x3 "RD_RX_CLKLN_LN_3,Clock lane observability" hexmask.byte 0x3 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x3 3. "rxclk_rxlp_ponulp_if,Clock lane ULP receiver (volatile)" "0,1" newline bitfld.byte 0x3 2. "rxclk_rxlp_ponlp_if,Clock lane LP receiver (volatile)" "0,1" newline bitfld.byte 0x3 1. "rxclk_rxlp_poncd_if,Clock lane LP contention detector (volatile)" "0,1" newline bitfld.byte 0x3 0. "rxclk_rxhs_rx_pon_if,Clock lane HS receiver power on (volatile)" "0,1" group.byte 0x37A++0x1 line.byte 0x0 "RX_CLKLN_OFFST_CAL_0,Clock lane offset cancellation control" hexmask.byte 0x0 2.--7. 1. "rxclk_rxhs_clk_offst_cal_ovr_5_0,RX HS clock offset calibration override control" newline bitfld.byte 0x0 1. "rxclk_caldone_ovr,Clock lane offset calibration done override" "0,1" newline bitfld.byte 0x0 0. "rxclk_caldone_ovr_en,Clock lane offset calibration done override enable" "0,1" line.byte 0x1 "RX_CLKLN_OFFST_CAL_1,Clock lane offset cancellation control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "rxclk_start_cal_ovr_rw,Clock lane digital offset start calibration override enable control" "0,1" newline bitfld.byte 0x1 3. "rxclk_start_cal_ovr_en_rw,Clock lane digital offset start calibration override enable control" "0,1" newline bitfld.byte 0x1 2. "rxclk_rxhs_start_cal_ovr_rw,Clock lane analog offset start calibration override enable control" "0,1" newline bitfld.byte 0x1 1. "rxclk_rxhs_start_cal_ovr_en_rw,Clock lane analog offset start calibration override enable control" "0,1" newline bitfld.byte 0x1 0. "rxclk_rxhs_clk_offst_cal_ovr_en,RX HS clock offset calibration override enable control" "0,1" rgroup.byte 0x39D++0x2 line.byte 0x0 "RD_RX_CLKLN_OFFST_CAL_0,Clock lane offset cancellation observability" bitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rxclk_rxhs_clk_m_cal,Clock lane offset calibration m-line comparator output (volatile)" "0,1" newline hexmask.byte 0x0 1.--4. 1. "rxclk_errcal,Clock lane offset calibration error (volatile)" newline bitfld.byte 0x0 0. "rxclk_caldone,Clock lane offset calibration done (volatile)" "0: Clock lane offset calibration not done.,1: Clock lane offset calibration done." line.byte 0x1 "RD_RX_CLKLN_OFFST_CAL_1,Clock lane offset cancellation observability" bitfld.byte 0x1 7. "rxclk_rxhs_start_cal,Clock lane analog offset start calibration (volatile)" "0,1" newline bitfld.byte 0x1 6. "rxclk_rxhs_clk_p_cal,Clock lane offset calibration p-line comparator output (volatile)" "0,1" newline hexmask.byte 0x1 0.--5. 1. "rxclk_rxhs_clk_offst_cal_5_0,Clock lane offset calibration setting (volatile)" line.byte 0x2 "RD_RX_CLKLN_OFFST_CAL_2,Clock lane offset cancellation observability" hexmask.byte 0x2 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0. "rxclk_start_cal,Clock lane digital offset start calibration (volatile)" "0,1" group.byte 0x501++0x1 line.byte 0x0 "RX_LN0_LN_0,Lane 0 control" bitfld.byte 0x0 7. "hsrx_en_bypass_ln0,HS RX enable bypass" "0,1" newline bitfld.byte 0x0 6. "bintpon_ln0,Bias block power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x0 5. "bintpon_bypass_ln0,Bias block power-on bypass override" "0,1" newline hexmask.byte 0x0 1.--4. 1. "atb_sel_ln0,Analog Test Bus signals selection:" newline bitfld.byte 0x0 0. "atb_lptx1200_on_ln0,Selection to to probe in analog test bus LP transmitter voltage reference" "0,1" line.byte 0x1 "RX_LN0_LN_1,Lane 0 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "hsrxpon_if_ln0,Power on of the RX HS" "0,1" newline bitfld.byte 0x1 3. "hsrxpon_bypass_ln0,Power on of the RX HS bypass control" "0,1" newline bitfld.byte 0x1 2. "hsrxenterm_if_ln0,RX HS enable term" "0,1" newline bitfld.byte 0x1 1. "hsrxenterm_bypass_ln0,Bypass control of RX high speed enable term" "0,1" newline bitfld.byte 0x1 0. "hsrx_en_if_ln0_tester,HS RX enable for tester" "0,1" group.byte 0x504++0x6 line.byte 0x0 "RX_LN0_LN_3,Lane 0 control" bitfld.byte 0x0 7. "lprxponcd_bypass_ln0,LP RX Contention Detector power-on bypass override" "0,1" newline hexmask.byte 0x0 0.--6. 1. "reserved_0,Reserved field" line.byte 0x1 "RX_LN0_LN_4,Lane 0 control" bitfld.byte 0x1 6.--7. "lptxdin_ln0_1_0,LP TX Driver Data input can be overridden if bypass signal is 1'b1" "0,1,2,3" newline bitfld.byte 0x1 5. "lptxdin_bypass_ln0,LP TX Driver Data input bypass override" "0,1" newline bitfld.byte 0x1 4. "lprxponulp_ln0,LP RX ULP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 3. "lprxponulp_bypass_ln0,LP RX ULP power-on bypass override" "0,1" newline bitfld.byte 0x1 2. "lprxponlp_ln0,LP RX LP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 1. "lprxponlp_bypass_ln0,LP RX LP power-on bypass override" "0,1" newline bitfld.byte 0x1 0. "lprxponcd_ln0,LP RX Contention Detector power-on; can be overridden if bypass signal is 1'b1" "0,1" line.byte 0x2 "RX_LN0_LN_5,Lane 0 control" bitfld.byte 0x2 7. "lptxpon_ln0,LP TX power-on" "0,1" newline bitfld.byte 0x2 6. "lptxpon_bypass_ln0,LP TX power-on bypass bit" "0,1" newline bitfld.byte 0x2 5. "lptxenulp_ln0,LP TX enable ULP" "0,1" newline bitfld.byte 0x2 4. "lptxenulp_bypass_ln0,LP TX enable ULP bypass bit" "0,1" newline bitfld.byte 0x2 3. "lptxenpulldwn_ln0,LP TX enable pull-down" "0,1" newline bitfld.byte 0x2 2. "lptxenpulldwn_bypass_ln0,LP TX enable pull-down bypass bit" "0,1" newline bitfld.byte 0x2 1. "lptxena_ln0,LP TX enable" "0,1" newline bitfld.byte 0x2 0. "lptxena_bypass_ln0,LP TX enable bypass bit" "0,1" line.byte 0x3 "RX_LN0_LN_6,Lane 0 control" rbitfld.byte 0x3 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x3 5. "rx0_rxhs_feed_int_clk_ovr_en,HS-RX source clock override enable control for lane 0" "0,1" newline bitfld.byte 0x3 4. "rx0_rxhs_feed_int_clk_ovr,HS-RX source clock override control for lane 0" "0,1" newline bitfld.byte 0x3 1.--3. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x3 0. "polarity_ln0,Polarity change control 0 - Two PHYs with P/N ports connected to P/N respectively 1 - Two PHYs with P/N ports connected to N/P respectively" "0: Two PHYs with P/N ports connected to P/N..,?" line.byte 0x4 "RX_LN0_LN_7,Lane 0 control" rbitfld.byte 0x4 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x4 5. "rx0_rxhs_clk_from_long_channel_if,RX HS clock from long channel" "0,1" newline bitfld.byte 0x4 4. "recal_ln0_ovr,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x4 3. "recal_ln0_ovr_en,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x4 0.--2. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x5 "RX_LN0_LN_8,Lane 0 control" bitfld.byte 0x5 7. "rx_des_en_ln0,RX deserializer enable" "0,1" newline bitfld.byte 0x5 6. "rx_des_en_bypass_ln0,RX deserializer enable bypass control" "0,1" newline bitfld.byte 0x5 5. "rx0_txlp_sr_bypass_if,LP TX slew-rate bypass" "0,1" newline bitfld.byte 0x5 3.--4. "rx0_txlp_eniocont_if,RX IO continuity enable" "0,1,2,3" newline bitfld.byte 0x5 0.--2. "rx0_rxhs_data_eq_if,RX HS data equalizer" "0,1,2,3,4,5,6,7" line.byte 0x6 "RX_LN0_LN_9,Lane 0 control" bitfld.byte 0x6 7. "rx0_pm_sample_error_counter,strobe to read the error counter" "0,1" newline bitfld.byte 0x6 6. "rx0_pm_start_control_ovr_en,Pattern matcher start override enable." "0,1" newline bitfld.byte 0x6 5. "rx0_pm_start_control_ovr,Pattern matcher start override." "0,1" newline hexmask.byte 0x6 1.--4. 1. "rx0_pm_mode_r,Configuration mode for the pattern matcher" newline bitfld.byte 0x6 0. "rx0_data_retiming_out_swap_sel,retiming mux control" "0,1" group.byte 0x50D++0x0 line.byte 0x0 "RX_LN0_LN_12,Lane 0 control" bitfld.byte 0x0 7. "rx0_pm_man_error_latch,Allows manual pattern matcher error counter latch" "0,1" newline hexmask.byte 0x0 3.--6. 1. "rx0_lb_prog_if,lane 0 receiver biasing currents" newline bitfld.byte 0x0 2. "rx0_lb_res_cm_en_if,lane 0 static termination driver middle point pull down enable" "0,1" newline bitfld.byte 0x0 1. "rx0_lb_res_dn_en_if,lane 0 static termination driver test dn line enable" "0,1" newline bitfld.byte 0x0 0. "rx0_lb_res_dp_en_if,lane 0 static termination driver test dp line enable" "0,1" rgroup.byte 0x52B++0x9 line.byte 0x0 "RD_RX_LN0_LN_0,Lane 0 observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx0_rxhs_deserial_data_en_if,HS-RX deserializer reset observation for lane 0 (volatile)" "0,1" newline bitfld.byte 0x0 2. "hsrx_en_if_ln0,HS-RX enable of lane 0 (volatile)" "0,1" newline bitfld.byte 0x0 1. "enable_ln0,Signal that passes AFE control from soft macro to lane 0 (volatile)" "0,1" newline bitfld.byte 0x0 0. "bintpon_if_ln0,Level shifter enable of lane 0 (volatile)" "0,1" line.byte 0x1 "RD_RX_LN0_LN_1,Lane 0 observability" bitfld.byte 0x1 7. "lptxpon_if_ln0,LP-TX power on (volatile)" "0,1" newline bitfld.byte 0x1 6. "lptxenulp_if_ln0,LP-TX pull up enable (for stopstate) (volatile)" "0,1" newline bitfld.byte 0x1 5. "lptxenpulldn_if_ln0,LP-TX pull down enable (for ULP) (volatile)" "0,1" newline bitfld.byte 0x1 4. "lptxena_if_ln0,LP-TX driver enable (volatile)" "0,1" newline bitfld.byte 0x1 2.--3. "lptxdin_if_ln0_1_0,LP-TX data in (volatile)" "0,1,2,3" newline bitfld.byte 0x1 0.--1. "reserved_0,Reserved field" "0,1,2,3" line.byte 0x2 "RD_RX_LN0_LN_2,Lane 0 observability" bitfld.byte 0x2 7. "rx0_rxhs_rx_enterm_if,RX HS enable term (volatile)" "0,1" newline bitfld.byte 0x2 6. "rx0_rxhs_rx_enlogic_if,RX HS enlogic (volatile)" "0,1" newline bitfld.byte 0x2 5. "rx0_rxhs_rx_en_if,RX HS enable (volatile)" "0,1" newline hexmask.byte 0x2 0.--4. 1. "reserved_0,Reserved field" line.byte 0x3 "RD_RX_LN0_LN_3,Lane 0 observability" bitfld.byte 0x3 6.--7. "lprxdoutlp_ln0_1_0,LP-RX receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x3 4.--5. "lprxdoutcd_ln0_1_0,LP-CD receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x3 1.--3. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x3 0. "rx0_rxhs_rx_pon_if,RX HS power on (volatile)" "0,1" line.byte 0x4 "RD_RX_LN0_LN_4,Lane 0 observability" bitfld.byte 0x4 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x4 4. "rx0_deskewcalfailed_if,Deskew calibration failed (volatile)" "0,1" newline bitfld.byte 0x4 3. "rx0_deskewcaldone_if,Deskew calibration done (volatile)" "0,1" newline bitfld.byte 0x4 2. "lsrxclk_ln0,Low speed clock (XOR'ed from data lines) (volatile)" "0,1" newline bitfld.byte 0x4 0.--1. "lprxdoutulp_ln0_1_0,LP-RX ULP receiver outputs (volatile)" "0,1,2,3" line.byte 0x5 "RD_RX_LN0_LN_5,Lane 0 observability" hexmask.byte 0x5 0.--7. 1. "rx0_rxhs_data_if_7_0,RX HS data (volatile)" line.byte 0x6 "RD_RX_LN0_LN_6,Lane 0 observability" bitfld.byte 0x6 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x6 5. "rx0_pm_error_pm,Observation of the error flag generated by the master (volatile)" "0,1" newline bitfld.byte 0x6 3.--4. "rx0_txlp_iocont_if_1_0,IO continuity receiver output (volatile)" "0,1,2,3" newline bitfld.byte 0x6 2. "rx0_rxhs_word_clk_if,RX HS word clock (volatile)" "0,1" newline bitfld.byte 0x6 1. "rx0_rxhs_feed_int_clk_if,RX HS internal clock feedback (volatile)" "0,1" newline bitfld.byte 0x6 0. "rx0_rxhs_des_en_if,RX HS deserializer enable (volatile)" "0,1" line.byte 0x7 "RD_RX_LN0_LN_7,Lane 0 observability" hexmask.byte 0x7 0.--7. 1. "rx0_pm_error_counter_7_0,Error counter value (volatile)" line.byte 0x8 "RD_RX_LN0_LN_8,Lane 0 observability" hexmask.byte 0x8 0.--7. 1. "rx0_pm_error_counter_15_8,Error counter value (volatile)" line.byte 0x9 "RD_RX_LN0_LN_9,Lane 0 observability" hexmask.byte 0x9 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x9 0. "rx0_pm_start,Pattern matcher start flag observation (volatile)" "0,1" rgroup.byte 0x556++0x1 line.byte 0x0 "RD_RX_LN0_AFE_OBS_2,Lane 0 observability" bitfld.byte 0x0 7. "tx0_txlp_enulp,LP-TX ULP enable (volatile)" "0,1" newline bitfld.byte 0x0 6. "tx0_txlp_ena,LP-TX driver enable (volatile)" "0,1" newline bitfld.byte 0x0 5. "tx0_txlp_enlogic,LP-TX level shifter enable (volatile)" "0,1" newline bitfld.byte 0x0 4. "tx0_txlp_pon,LP-TX driver power on (volatile)" "0,1" newline hexmask.byte 0x0 0.--3. 1. "reserved_0,Reserved field" line.byte 0x1 "RD_TX_LN0_AFE_OBS_3,Lane 0 observability" bitfld.byte 0x1 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x1 6. "tx0_rxlp_ponulp,LP-RX ULP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 5. "tx0_rxlp_ponlp,LP-RX LP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 4. "tx0_rxlp_poncd,LP-RX contention detector receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 3. "tx0_txlp_sr_bypass,HS-TX slew rate circuitry bypass (volatile)" "0,1" newline bitfld.byte 0x1 2. "tx0_txlp_enpulldwn,LP-TX pull down enable (volatile)" "0,1" newline bitfld.byte 0x1 0.--1. "tx0_txlp_din_1_0,LP-TX driver data in (volatile)" "0,1,2,3" group.byte 0x57B++0x3 line.byte 0x0 "RX_LN0_OFFST_CAL_0,Lane 0 offset compensation control" bitfld.byte 0x0 7. "rx0_rxhs_data_offst_cal_en_ovr_en,Data offset calibration override enable control" "0,1" newline bitfld.byte 0x0 6. "rx0_cal_done_ovr,Calibration done override" "0,1" newline bitfld.byte 0x0 5. "rx0_cal_done_ovr_en,Calibration done override enable control" "0,1" newline bitfld.byte 0x0 4. "rx0_start_cal_ovr_rw,RX start calibration override" "0,1" newline bitfld.byte 0x0 3. "rx0_start_cal_ovr_en_rw,RX start calibration override enable" "0,1" newline rbitfld.byte 0x0 0.--2. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x1 "RX_LN0_OFFST_CAL_1,Lane 0 offset compensation control" bitfld.byte 0x1 7. "rx0_rxhs_data_offst_cal_ovr_en,Offset calibration setting override" "0,1" newline hexmask.byte 0x1 1.--6. 1. "rx0_rxhs_data_offst_cal_ovr_5_0,Offset calibration override value" newline bitfld.byte 0x1 0. "rx0_rxhs_data_offst_cal_en_ovr,Data offset calibration override enable control" "0,1" line.byte 0x2 "RX_LN0_OFFST_CAL_2,Lane 0 offset compensation control" hexmask.byte 0x2 0.--7. 1. "rx0_rxhs_data_ovr,RX HS data override" line.byte 0x3 "RX_LN0_OFFST_CAL_3,Lane 0 offset compensation control" hexmask.byte 0x3 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x3 1. "rx0_rxhs_repeatcal,RX HS repeat calibration" "0,1" newline bitfld.byte 0x3 0. "rx0_rxhs_data_ovr_en,RX HS data override enable" "0,1" rgroup.byte 0x59F++0x3 line.byte 0x0 "RD_RX_LN0_OFFST_CAL_0,Lane 0 offset compensation observability" hexmask.byte 0x0 3.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 2. "rx0_cal_error,Offset calibration algorithm error (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx0_cal_done,Offset calibration algorithm done (volatile)" "0,1" newline bitfld.byte 0x0 0. "rx0_start_cal,Offset calibration algorithm start (volatile)" "0,1" line.byte 0x1 "RD_RX_LN0_OFFST_CAL_1,Lane 0 offset compensation observability" hexmask.byte 0x1 0.--7. 1. "rx0_rxhs_data_int_7_0,HS-RX data received (AFE output) (volatile)" line.byte 0x2 "RD_RX_LN0_OFFST_CAL_2,Lane 0 offset compensation observability" bitfld.byte 0x2 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x2 6. "rx0_rxhs_data_offst_cal_en,Offset calibration algorithm enable (volatile)" "0,1" newline hexmask.byte 0x2 0.--5. 1. "rx0_rxhs_data_offst_cal_5_0,Offset calibration algorithm setting chosen (volatile)" line.byte 0x3 "RD_RX_LN0_OFFST_CAL_3,Lane 0 offset compensation observability" hexmask.byte 0x3 0.--7. 1. "rx0_total_ones_7_0,Offset calibration algorithm counter of 1s (volatile)" rgroup.byte 0x5E0++0x7 line.byte 0x0 "RD_RX_LN0_DDL_0,Lane 0 DDL tune observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx0_ddl_start_cal_if,DDL tune digital algorithm start (volatile)" "0,1" newline bitfld.byte 0x0 2. "rx0_ddl_finished_if,DDL tune done indication (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx0_ddl_error_flag_if,DDL tune error (volatile)" "0,1" newline bitfld.byte 0x0 0. "ddl_tune_en_ln0_if,DDL tune analog circuitry enable indication (volatile)" "0,1" line.byte 0x1 "RD_RX_LN0_DDL_1,Lane 0 DDL tune observability" hexmask.byte 0x1 0.--7. 1. "rx0_freq_meas_out_if_7_0,RX DDL tunning oscillation measurement (volatile)" line.byte 0x2 "RD_RX_LN0_DDL_2,Lane 0 DDL tune observability" hexmask.byte 0x2 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x2 0.--3. 1. "rx0_freq_meas_out_if_11_8,RX DDL tunning oscillation measurement (volatile)" line.byte 0x3 "RD_RX_LN0_DDL_3,Lane 0 DDL tune observability" hexmask.byte 0x3 0.--7. 1. "rx0_osc_freq_target_if_7_0,RX oscillator frequency target obs (volatile)" line.byte 0x4 "RD_RX_LN0_DDL_4,Lane 0 DDL tune observability" hexmask.byte 0x4 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x4 0.--3. 1. "rx0_osc_freq_target_if_11_8,RX oscillator frequency target obs (volatile)" line.byte 0x5 "RD_RX_LN0_DDL_5,Lane 0 DDL tune observability" bitfld.byte 0x5 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x5 5. "rx0_rxhs_ddl_phase_change_p_if,RX HS DDL phase change (volatile)" "0,1" newline hexmask.byte 0x5 0.--4. 1. "rx0_rxhs_ddl_tune_if_4_0,RX HS DDL tunning setting (volatile)" line.byte 0x6 "RD_RX_LN0_DDL_6,Lane 0 DDL tune observability" bitfld.byte 0x6 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline hexmask.byte 0x6 0.--4. 1. "rx0_rxhs_ddl_phase_clk_if_4_0,Clock DDL setting chosen (volatile)" line.byte 0x7 "RD_RX_LN0_DDL_7,Lane 0 DDL tune observability" hexmask.byte 0x7 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x7 0.--3. 1. "rx0_rxhs_ddl_phase_data_if,Data DDL setting chosen (volatile)" group.byte 0x606++0x6 line.byte 0x0 "RX_LN0_DDL_0,Lane 0 DDL tune control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx0_rxhs_ddl_tune_en_if,RX HS DDL tune enable" "0,1" newline bitfld.byte 0x0 4. "rx0_rxhs_ddl_tune_en_bypass,RX HS DDL tune enable bypass" "0,1" newline bitfld.byte 0x0 3. "rx0_ddl_start_cal_ovr_rw,RX DDL tunning calibration start override" "0,1" newline bitfld.byte 0x0 2. "rx0_ddl_start_cal_ovr_en_rw,RX DDL tunning calibration start override enable" "0,1" newline bitfld.byte 0x0 1. "rx0_ddl_finished_ovr,RX DDL tunning done override" "0,1" newline bitfld.byte 0x0 0. "rx0_ddl_finished_ovr_en,RX DDL tunning done override enable" "0,1" line.byte 0x1 "RX_LN0_DDL_1,Lane 0 DDL tune control" bitfld.byte 0x1 7. "rx0_rxhs_ddl_phase_change_p_ovr,RX HS DDL phase changed override value" "0,1" newline bitfld.byte 0x1 6. "rx0_rxhs_ddl_phase_change_p_ovr_en,RX HS DDL phase changed override control" "0,1" newline bitfld.byte 0x1 5. "rx0_rxhs_ddl_tune_ovr_en,RX HS DDL tune override enable control" "0,1" newline hexmask.byte 0x1 0.--4. 1. "rx0_rxhs_ddl_tune_ovr,RX HS DDL tune override for lane 0" line.byte 0x2 "RX_LN0_DDL_2,Lane 0 DDL tune control" rbitfld.byte 0x2 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x2 5. "rx0_rxhs_ddl_phase_clk_ovr_en,RX HS DDL phase clock override control" "0,1" newline hexmask.byte 0x2 0.--4. 1. "rx0_rxhs_ddl_phase_clk_ovr,RX HS DDL phase clock override value" line.byte 0x3 "RX_LN0_DDL_3,Lane 0 DDL tune control" rbitfld.byte 0x3 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x3 4. "rx0_rxhs_ddl_phase_data_ovr_en,Override enable for ddl phase data" "0,1" newline hexmask.byte 0x3 0.--3. 1. "rx0_rxhs_ddl_phase_data_ovr,RX HS DDL phase data override" line.byte 0x4 "RX_LN0_DDL_4,Lane 0 DDL tune control" hexmask.byte 0x4 0.--7. 1. "rx0_osc_freq_target_if_ovr__7_0,Target oscillating frequency override" line.byte 0x5 "RX_LN0_DDL_5,Lane 0 DDL tune control" hexmask.byte 0x5 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x5 0.--3. 1. "rx0_osc_freq_target_if_ovr__11_8,Oscillating frequency override Target" line.byte 0x6 "RX_LN0_DDL_6,Lane 0 DDL tune control" hexmask.byte 0x6 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x6 0. "rx0_osc_freq_target_if_ovr_en,Override for oscillation frequency target" "0,1" group.byte 0x701++0x1 line.byte 0x0 "RX_LN1_LN_0,Lane 1 control" bitfld.byte 0x0 7. "hsrx_en_bypass_ln1,HS RX enable bypass" "0,1" newline bitfld.byte 0x0 6. "bintpon_ln1,Bias block power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x0 5. "bintpon_bypass_ln1,Bias block power-on bypass override" "0,1" newline hexmask.byte 0x0 1.--4. 1. "atb_sel_ln1,Analog Test Bus signals selection:" newline rbitfld.byte 0x0 0. "reserved_0,Reserved field" "0,1" line.byte 0x1 "RX_LN1_LN_1,Lane 1 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "hsrxpon_if_ln1,Power on of the RX HS" "0,1" newline bitfld.byte 0x1 3. "hsrxpon_bypass_ln1,Power on of the RX HS bypass control" "0,1" newline bitfld.byte 0x1 2. "hsrxenterm_if_ln1,RX HS enable term" "0,1" newline bitfld.byte 0x1 1. "hsrxenterm_bypass_ln1,Bypass control of RX high speed enable term" "0,1" newline bitfld.byte 0x1 0. "hsrx_en_if_ln1_tester,HS RX enable for tester" "0,1" group.byte 0x704++0x1 line.byte 0x0 "RX_LN1_LN_3,Lane 1 control" bitfld.byte 0x0 7. "lprxponcd_bypass_ln1,LP RX Contention Detector power-on bypass override" "0,1" newline hexmask.byte 0x0 0.--6. 1. "reserved_0,Reserved field" line.byte 0x1 "RX_LN1_LN_4,Lane 1 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "lprxponulp_ln1,LP RX ULP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 3. "lprxponulp_bypass_ln1,LP RX ULP power-on bypass override" "0,1" newline bitfld.byte 0x1 2. "lprxponlp_ln1,LP RX LP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 1. "lprxponlp_bypass_ln1,LP RX LP power-on bypass override" "0,1" newline bitfld.byte 0x1 0. "lprxponcd_ln1,LP RX Contention Detector power-on; can be overridden if bypass signal is 1'b1" "0,1" group.byte 0x707++0x6 line.byte 0x0 "RX_LN1_LN_6,Lane 1 control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx1_rxhs_feed_int_clk_ovr_en,HS-RX source clock override enable control for lane 1" "0,1" newline bitfld.byte 0x0 4. "rx1_rxhs_feed_int_clk_ovr,HS-RX source clock override control for lane 1" "0,1" newline bitfld.byte 0x0 1.--3. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x0 0. "polarity_ln1,Polarity change control 0 - Two PHYs with P/N ports connected to P/N respectively 1 - Two PHYs with P/N ports connected to N/P respectively" "0: Two PHYs with P/N ports connected to P/N..,?" line.byte 0x1 "RX_LN1_LN_7,Lane 1 control" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "rx1_rxhs_clk_from_long_channel_if,RX HS clock from long channel" "0,1" newline bitfld.byte 0x1 4. "recal_ln1_ovr,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x1 3. "recal_ln1_ovr_en,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x1 0.--2. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x2 "RX_LN1_LN_8,Lane 1 control" bitfld.byte 0x2 7. "rx_des_en_ln1,RX deserializer enable" "0,1" newline bitfld.byte 0x2 6. "rx_des_en_bypass_ln1,RX deserializer enable bypass control" "0,1" newline rbitfld.byte 0x2 3.--5. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x2 0.--2. "rx1_rxhs_data_eq_if,RX HS data equalizer" "0,1,2,3,4,5,6,7" line.byte 0x3 "RX_LN1_LN_9,Lane 1 control" bitfld.byte 0x3 7. "rx1_pm_sample_error_counter,strobe to read the error counter" "0,1" newline bitfld.byte 0x3 6. "rx1_pm_start_control_ovr_en,Pattern matcher start override enable." "0,1" newline bitfld.byte 0x3 5. "rx1_pm_start_control_ovr,Pattern matcher start override." "0,1" newline hexmask.byte 0x3 1.--4. 1. "rx1_pm_mode_r,Configuration mode for the pattern matcher" newline bitfld.byte 0x3 0. "rx1_data_retiming_out_swap_sel,retiming mux control" "0,1" line.byte 0x4 "RX_LN1_LN_10,Lane 1 control" bitfld.byte 0x4 7. "rx1_rxhs_ddl_phase_clk_ovr_en,RX HS DDL phase data override control" "0,1" newline hexmask.byte 0x4 2.--6. 1. "rx1_rxhs_ddl_phase_clk_ovr,RX HS DDL phase clock override" newline bitfld.byte 0x4 1. "rx1_rxhs_ddl_phase_change_p_ovr_en,RX HS DDL phase changed override control" "0,1" newline bitfld.byte 0x4 0. "rx1_rxhs_ddl_phase_change_p_ovr,RX HS DDL phase changed override control" "0,1" line.byte 0x5 "RX_LN1_LN_11,Lane 1 control" rbitfld.byte 0x5 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x5 4. "rx1_rxhs_ddl_phase_data_ovr_en,Override enable for ddl phase data" "0,1" newline hexmask.byte 0x5 0.--3. 1. "rx1_rxhs_ddl_phase_data_ovr,RX HS DDL phase clock override" line.byte 0x6 "RX_LN1_LN_12,Lane 1 control" bitfld.byte 0x6 7. "rx1_pm_man_error_latch,Allows manual pattern matcher error counter latch" "0,1" newline hexmask.byte 0x6 3.--6. 1. "rx1_lb_prog_if,lane 1 receiver biasing currents" newline bitfld.byte 0x6 2. "rx1_lb_res_cm_en_if,lane 1 static termination driver middle point pull down enable" "0,1" newline bitfld.byte 0x6 1. "rx1_lb_res_dn_en_if,lane 1 static termination driver test dn line enable" "0,1" newline bitfld.byte 0x6 0. "rx1_lb_res_dp_en_if,lane 1 static termination driver test dp line enable" "0,1" rgroup.byte 0x72B++0x0 line.byte 0x0 "RD_RX_LN1_LN_0,Lane 1 observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx1_rxhs_deserial_data_en_if,HS-RX deserializer reset observation for lane 1 (volatile)" "0,1" newline bitfld.byte 0x0 2. "hsrx_en_if_ln1,HS-RX enable of lane 1 (volatile)" "0,1" newline bitfld.byte 0x0 1. "enable_ln1,Signal that passes AFE control from soft macro to lane 1 (volatile)" "0,1" newline bitfld.byte 0x0 0. "bintpon_if_ln1,Level shifter enable of lane 1 (volatile)" "0,1" rgroup.byte 0x72D++0x8 line.byte 0x0 "RD_RX_LN1_LN_2,Lane 1 observability" bitfld.byte 0x0 7. "rx1_rxhs_rx_enterm_if,RX HS enable term (volatile)" "0,1" newline bitfld.byte 0x0 6. "rx1_rxhs_rx_enlogic_if,RX HS enlogic (volatile)" "0,1" newline bitfld.byte 0x0 5. "rx1_rxhs_rx_en_if,RX HS enable (volatile)" "0,1" newline hexmask.byte 0x0 0.--4. 1. "reserved_0,Reserved field" line.byte 0x1 "RD_RX_LN1_LN_3,Lane 1 observability" bitfld.byte 0x1 6.--7. "lprxdoutlp_ln1_1_0,LP-RX receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x1 4.--5. "lprxdoutcd_ln1_1_0,LP-CD receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x1 3. "rx1_rxlp_ponulp_if,LP-RX ULP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 2. "rx1_rxlp_ponlp_if,LP-RX LP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 1. "rx1_rxlp_poncd_if,LP-RX contention detector power on (volatile)" "0,1" newline bitfld.byte 0x1 0. "rx1_rxhs_rx_pon_if,RX HS power on (volatile)" "0,1" line.byte 0x2 "RD_RX_LN1_LN_4,Lane 1 observability" bitfld.byte 0x2 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x2 4. "rx1_deskewcalfailed_if,Deskew calibration failed (volatile)" "0,1" newline bitfld.byte 0x2 3. "rx1_deskewcaldone_if,Deskew calibration done (volatile)" "0,1" newline bitfld.byte 0x2 2. "lsrxclk_ln1,Low speed clock (XOR'ed from data lines) (volatile)" "0,1" newline bitfld.byte 0x2 0.--1. "lprxdoutulp_ln1_1_0,LP-RX ULP receiver outputs (volatile)" "0,1,2,3" line.byte 0x3 "RD_RX_LN1_LN_5,Lane 1 observability" hexmask.byte 0x3 0.--7. 1. "rx1_rxhs_data_if_7_0,RX HS data (volatile)" line.byte 0x4 "RD_RX_LN1_LN_6,Lane 1 observability" bitfld.byte 0x4 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x4 5. "rx1_pm_error_pm,Observation of the error flag generated by the master (volatile)" "0,1" newline bitfld.byte 0x4 3.--4. "reserved_1,Reserved field (volatile)" "0,1,2,3" newline bitfld.byte 0x4 2. "rx1_rxhs_word_clk_if,RX HS word clock (volatile)" "0,1" newline bitfld.byte 0x4 1. "rx1_rxhs_feed_int_clk_if,RX HS internal clock feedback (volatile)" "0,1" newline bitfld.byte 0x4 0. "rx1_rxhs_des_en_if,RX HS deserializer enable (volatile)" "0,1" line.byte 0x5 "RD_RX_LN1_LN_7,Lane 1 observability" hexmask.byte 0x5 0.--7. 1. "rx1_pm_error_counter_7_0,Error counter value (volatile)" line.byte 0x6 "RD_RX_LN1_LN_8,Lane 1 observability" hexmask.byte 0x6 0.--7. 1. "rx1_pm_error_counter_15_8,Error counter value (volatile)" line.byte 0x7 "RD_RX_LN1_LN_9,Lane 1 observability" bitfld.byte 0x7 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x7 2.--6. 1. "rx1_rxhs_ddl_phase_clk_if_4_0,Clock DDL setting chosen (volatile)" newline bitfld.byte 0x7 1. "rx1_rxhs_ddl_phase_change_p_if,DDL setting change latch pulse (volatile)" "0,1" newline bitfld.byte 0x7 0. "rx1_pm_start,Pattern matcher start flag observation (volatile)" "0,1" line.byte 0x8 "RD_RX_LN1_LN_10,Lane 1 observability" hexmask.byte 0x8 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x8 0.--3. 1. "rx1_rxhs_ddl_phase_data_if,Data DDl setting chosen (volatile)" group.byte 0x77B++0x3 line.byte 0x0 "RX_LN1_OFFST_CAL_0,Lane 1 offset compensation control" bitfld.byte 0x0 7. "rx1_rxhs_data_offst_cal_en_ovr_en,Data offset calibration override enable control" "0,1" newline bitfld.byte 0x0 6. "rx1_cal_done_ovr,Calibration done override" "0,1" newline bitfld.byte 0x0 5. "rx1_cal_done_ovr_en,Calibration done override enable control" "0,1" newline bitfld.byte 0x0 4. "rx1_start_cal_ovr_rw,RX start calibration override" "0,1" newline bitfld.byte 0x0 3. "rx1_start_cal_ovr_en_rw,RX start calibration override enable" "0,1" newline rbitfld.byte 0x0 0.--2. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x1 "RX_LN1_OFFST_CAL_1,Lane 1 offset compensation control" bitfld.byte 0x1 7. "rx1_rxhs_data_offst_cal_ovr_en,Offset calibration setting override" "0,1" newline hexmask.byte 0x1 1.--6. 1. "rx1_rxhs_data_offst_cal_ovr_5_0,Offset calibration override value" newline bitfld.byte 0x1 0. "rx1_rxhs_data_offst_cal_en_ovr,Data offset calibration override enable control" "0,1" line.byte 0x2 "RX_LN1_OFFST_CAL_2,Lane 1 offset compensation control" hexmask.byte 0x2 0.--7. 1. "rx1_rxhs_data_ovr,RX HS data override" line.byte 0x3 "RX_LN1_OFFST_CAL_3,Lane 1 offset compensation control" hexmask.byte 0x3 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x3 1. "rx1_rxhs_repeatcal,RX HS repeat calibration" "0,1" newline bitfld.byte 0x3 0. "rx1_rxhs_data_ovr_en,RX HS data override enable" "0,1" rgroup.byte 0x79F++0x3 line.byte 0x0 "RD_RX_LN1_OFFST_CAL_0,Lane 1 offset compensation observability" hexmask.byte 0x0 3.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 2. "rx1_cal_error,Offset calibration algorithm error (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx1_cal_done,Offset calibration algorithm done (volatile)" "0,1" newline bitfld.byte 0x0 0. "rx1_start_cal,Offset calibration algorithm start (volatile)" "0,1" line.byte 0x1 "RD_RX_LN1_OFFST_CAL_1,Lane 1 offset compensation observability" hexmask.byte 0x1 0.--7. 1. "rx1_rxhs_data_int_7_0,HS-RX data received (AFE output) (volatile)" line.byte 0x2 "RD_RX_LN1_OFFST_CAL_2,Lane 1 offset compensation observability" bitfld.byte 0x2 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x2 6. "rx1_rxhs_data_offst_cal_en,Offset calibration algorithm enable (volatile)" "0,1" newline hexmask.byte 0x2 0.--5. 1. "rx1_rxhs_data_offst_cal_5_0,Offset calibration algorithm setting chosen (volatile)" line.byte 0x3 "RD_RX_LN1_OFFST_CAL_3,Lane 1 offset compensation observability" hexmask.byte 0x3 0.--7. 1. "rx1_total_ones_7_0,Offset calibration algorithm counter of 1s (volatile)" rgroup.byte 0x7E0++0x5 line.byte 0x0 "RD_RX_LN1_DDL_0,Lane 1 DDL tune observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx1_ddl_start_cal_if,DDL tune digital algorithm start (volatile)" "0,1" newline bitfld.byte 0x0 2. "rx1_ddl_finished_if,DDL tune done indication (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx1_ddl_error_flag_if,DDL tune error (volatile)" "0,1" newline bitfld.byte 0x0 0. "ddl_tune_en_ln1_if,DDL tune analog circuitry enable indication (volatile)" "0,1" line.byte 0x1 "RD_RX_LN1_DDL_1,Lane 1 DDL tune observability" hexmask.byte 0x1 0.--7. 1. "rx1_freq_meas_out_if_7_0,RX DDL tunning oscillation measurement (volatile)" line.byte 0x2 "RD_RX_LN1_DDL_2,Lane 1 DDL tune observability" hexmask.byte 0x2 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x2 0.--3. 1. "rx1_freq_meas_out_if_11_8,RX DDL tunning oscillation measurement (volatile)" line.byte 0x3 "RD_RX_LN1_DDL_3,Lane 1 DDL tune observability" hexmask.byte 0x3 0.--7. 1. "rx1_osc_freq_target_if_7_0,RX oscillator frequency target obs (volatile)" line.byte 0x4 "RD_RX_LN1_DDL_4,Lane 1 DDL tune observability" hexmask.byte 0x4 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x4 0.--3. 1. "rx1_osc_freq_target_if_11_8,RX oscillator frequency target obs (volatile)" line.byte 0x5 "RD_RX_LN1_DDL_5,Lane 1 DDL tune observability" bitfld.byte 0x5 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline hexmask.byte 0x5 0.--4. 1. "rx1_rxhs_ddl_tune_if_4_0,RX HS DDL tunning setting (volatile)" group.byte 0x806++0x1 line.byte 0x0 "RX_LN1_DDL_0,Lane 1 DDL tune control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx1_rxhs_ddl_tune_en_if,RX HS DDL tune enable" "0,1" newline bitfld.byte 0x0 4. "rx1_rxhs_ddl_tune_en_bypass,RX HS DDL tune enable bypass" "0,1" newline bitfld.byte 0x0 3. "rx1_ddl_start_cal_ovr_rw,RX DDL tunning calibration start override" "0,1" newline bitfld.byte 0x0 2. "rx1_ddl_start_cal_ovr_en_rw,RX DDL tunning calibration start override enable" "0,1" newline bitfld.byte 0x0 1. "rx1_ddl_finished_ovr,RX DDL tunning done override" "0,1" newline bitfld.byte 0x0 0. "rx1_ddl_finished_ovr_en,RX DDL tunning done override enable" "0,1" line.byte 0x1 "RX_LN1_DDL_1,Lane 1 DDL tune control" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "rx1_rxhs_ddl_tune_ovr_en,RX HS DDL tune override enable control" "0,1" newline hexmask.byte 0x1 0.--4. 1. "rx1_rxhs_ddl_tune_ovr,RX HS DDL tune override for lane 1" group.byte 0x80A++0x2 line.byte 0x0 "RX_LN1_DDL_4,Lane 1 DDL tune control" hexmask.byte 0x0 0.--7. 1. "rx1_osc_freq_target_if_ovr__7_0,Target oscillating frequency override" line.byte 0x1 "RX_LN1_DDL_5,Lane 1 DDL tune control" hexmask.byte 0x1 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x1 0.--3. 1. "rx1_osc_freq_target_if_ovr__11_8,Oscillating frequency override Target" line.byte 0x2 "RX_LN1_DDL_6,Lane 1 DDL tune control" hexmask.byte 0x2 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0. "rx1_osc_freq_target_if_ovr_en,Override for oscillation frequency target" "0,1" group.byte 0x901++0x1 line.byte 0x0 "RX_LN2_LN_0,Lane 2 control" bitfld.byte 0x0 7. "hsrx_en_bypass_ln2,HS RX enable bypass" "0,1" newline bitfld.byte 0x0 6. "bintpon_ln2,Bias block power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x0 5. "bintpon_bypass_ln2,Bias block power-on bypass override" "0,1" newline hexmask.byte 0x0 1.--4. 1. "atb_sel_ln2,Analog Test Bus signals selection:" newline rbitfld.byte 0x0 0. "reserved_0,Reserved field" "0,1" line.byte 0x1 "RX_LN2_LN_1,Lane 2 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "hsrxpon_if_ln2,Power on of the RX HS" "0,1" newline bitfld.byte 0x1 3. "hsrxpon_bypass_ln2,Power on of the RX HS bypass control" "0,1" newline bitfld.byte 0x1 2. "hsrxenterm_if_ln2,RX HS enable term" "0,1" newline bitfld.byte 0x1 1. "hsrxenterm_bypass_ln2,Bypass control of RX high speed enable term" "0,1" newline bitfld.byte 0x1 0. "hsrx_en_if_ln2_tester,HS RX enable for tester" "0,1" group.byte 0x904++0x1 line.byte 0x0 "RX_LN2_LN_3,Lane 2 control" bitfld.byte 0x0 7. "lprxponcd_bypass_ln2,LP RX Contention Detector power-on bypass override" "0,1" newline hexmask.byte 0x0 0.--6. 1. "reserved_0,Reserved field" line.byte 0x1 "RX_LN2_LN_4,Lane 2 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "lprxponulp_ln2,LP RX ULP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 3. "lprxponulp_bypass_ln2,LP RX ULP power-on bypass override" "0,1" newline bitfld.byte 0x1 2. "lprxponlp_ln2,LP RX LP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 1. "lprxponlp_bypass_ln2,LP RX LP power-on bypass override" "0,1" newline bitfld.byte 0x1 0. "lprxponcd_ln2,LP RX Contention Detector power-on; can be overridden if bypass signal is 1'b1" "0,1" group.byte 0x907++0x6 line.byte 0x0 "RX_LN2_LN_6,Lane 2 control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx2_rxhs_feed_int_clk_ovr_en,HS-RX source clock override enable control for lane 2" "0,1" newline bitfld.byte 0x0 4. "rx2_rxhs_feed_int_clk_ovr,HS-RX source clock override control for lane 2" "0,1" newline bitfld.byte 0x0 1.--3. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x0 0. "polarity_ln2,Polarity change control 0 - Two PHYs with P/N ports connected to P/N respectively 1 - Two PHYs with P/N ports connected to N/P respectively" "0: Two PHYs with P/N ports connected to P/N..,?" line.byte 0x1 "RX_LN2_LN_7,Lane 2 control" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "rx2_rxhs_clk_from_long_channel_if,RX HS clock from long channel" "0,1" newline bitfld.byte 0x1 4. "recal_ln2_ovr,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x1 3. "recal_ln2_ovr_en,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x1 0.--2. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x2 "RX_LN2_LN_8,Lane 2 control" bitfld.byte 0x2 7. "rx_des_en_ln2,RX deserializer enable" "0,1" newline bitfld.byte 0x2 6. "rx_des_en_bypass_ln2,RX deserializer enable bypass control" "0,1" newline rbitfld.byte 0x2 3.--5. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x2 0.--2. "rx2_rxhs_data_eq_if,RX HS data equalizer" "0,1,2,3,4,5,6,7" line.byte 0x3 "RX_LN2_LN_9,Lane 2 control" bitfld.byte 0x3 7. "rx2_pm_sample_error_counter,strobe to read the error counter" "0,1" newline bitfld.byte 0x3 6. "rx2_pm_start_control_ovr_en,Pattern matcher start override enable." "0,1" newline bitfld.byte 0x3 5. "rx2_pm_start_control_ovr,Pattern matcher start override." "0,1" newline hexmask.byte 0x3 1.--4. 1. "rx2_pm_mode_r,Configuration mode for the pattern matcher" newline bitfld.byte 0x3 0. "rx2_data_retiming_out_swap_sel,retiming mux control" "0,1" line.byte 0x4 "RX_LN2_LN_10,Lane 2 control" bitfld.byte 0x4 7. "rx2_rxhs_ddl_phase_clk_ovr_en,RX HS DDL phase data override control" "0,1" newline hexmask.byte 0x4 2.--6. 1. "rx2_rxhs_ddl_phase_clk_ovr,RX HS DDL phase clock override" newline bitfld.byte 0x4 1. "rx2_rxhs_ddl_phase_change_p_ovr_en,RX HS DDL phase changed override control" "0,1" newline bitfld.byte 0x4 0. "rx2_rxhs_ddl_phase_change_p_ovr,RX HS DDL phase changed override control" "0,1" line.byte 0x5 "RX_LN2_LN_11,Lane 2 control" rbitfld.byte 0x5 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x5 4. "rx2_rxhs_ddl_phase_data_ovr_en,Override enable for ddl phase data" "0,1" newline hexmask.byte 0x5 0.--3. 1. "rx2_rxhs_ddl_phase_data_ovr,RX HS DDL phase clock override" line.byte 0x6 "RX_LN2_LN_12,Lane 2 control" bitfld.byte 0x6 7. "rx2_pm_man_error_latch,Allows manual pattern matcher error counter latch" "0,1" newline hexmask.byte 0x6 3.--6. 1. "rx2_lb_prog_if,lane 2 receiver biasing currents" newline bitfld.byte 0x6 2. "rx2_lb_res_cm_en_if,lane 2 static termination driver middle point pull down enable" "0,1" newline bitfld.byte 0x6 1. "rx2_lb_res_dn_en_if,lane 2 static termination driver test dn line enable" "0,1" newline bitfld.byte 0x6 0. "rx2_lb_res_dp_en_if,lane 2 static termination driver test dp line enable" "0,1" rgroup.byte 0x92B++0x0 line.byte 0x0 "RD_RX_LN2_LN_0,Lane 2 observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx2_rxhs_deserial_data_en_if,HS-RX deserializer reset observation for lane 2 (volatile)" "0,1" newline bitfld.byte 0x0 2. "hsrx_en_if_ln2,HS-RX enable of lane 2 (volatile)" "0,1" newline bitfld.byte 0x0 1. "enable_ln2,Signal that passes AFE control from soft macro to lane 2 (volatile)" "0,1" newline bitfld.byte 0x0 0. "bintpon_if_ln2,Level shifter enable of lane 2 (volatile)" "0,1" rgroup.byte 0x92D++0x8 line.byte 0x0 "RD_RX_LN2_LN_2,Lane 2 observability" bitfld.byte 0x0 7. "rx2_rxhs_rx_enterm_if,RX HS enable term (volatile)" "0,1" newline bitfld.byte 0x0 6. "rx2_rxhs_rx_enlogic_if,RX HS enlogic (volatile)" "0,1" newline bitfld.byte 0x0 5. "rx2_rxhs_rx_en_if,RX HS enable (volatile)" "0,1" newline hexmask.byte 0x0 0.--4. 1. "reserved_0,Reserved field" line.byte 0x1 "RD_RX_LN2_LN_3,Lane 2 observability" bitfld.byte 0x1 6.--7. "lprxdoutlp_ln2_1_0,LP-RX receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x1 4.--5. "lprxdoutcd_ln2_1_0,LP-CD receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x1 3. "rx2_rxlp_ponulp_if,LP-RX ULP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 2. "rx2_rxlp_ponlp_if,LP-RX LP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 1. "rx2_rxlp_poncd_if,LP-RX contention detector power on (volatile)" "0,1" newline bitfld.byte 0x1 0. "rx2_rxhs_rx_pon_if,RX HS power on (volatile)" "0,1" line.byte 0x2 "RD_RX_LN2_LN_4,Lane 2 observability" bitfld.byte 0x2 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x2 4. "rx2_deskewcalfailed_if,Deskew calibration failed (volatile)" "0,1" newline bitfld.byte 0x2 3. "rx2_deskewcaldone_if,Deskew calibration done (volatile)" "0,1" newline bitfld.byte 0x2 2. "lsrxclk_ln2,Low speed clock (XOR'ed from data lines) (volatile)" "0,1" newline bitfld.byte 0x2 0.--1. "lprxdoutulp_ln2_1_0,LP-RX ULP receiver outputs (volatile)" "0,1,2,3" line.byte 0x3 "RD_RX_LN2_LN_5,Lane 2 observability" hexmask.byte 0x3 0.--7. 1. "rx2_rxhs_data_if_7_0,RX HS data (volatile)" line.byte 0x4 "RD_RX_LN2_LN_6,Lane 2 observability" bitfld.byte 0x4 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x4 5. "rx2_pm_error_pm,Observation of the error flag generated by the master (volatile)" "0,1" newline bitfld.byte 0x4 3.--4. "reserved_1,Reserved field (volatile)" "0,1,2,3" newline bitfld.byte 0x4 2. "rx2_rxhs_word_clk_if,RX HS word clock (volatile)" "0,1" newline bitfld.byte 0x4 1. "rx2_rxhs_feed_int_clk_if,RX HS internal clock feedback (volatile)" "0,1" newline bitfld.byte 0x4 0. "rx2_rxhs_des_en_if,RX HS deserializer enable (volatile)" "0,1" line.byte 0x5 "RD_RX_LN2_LN_7,Lane 2 observability" hexmask.byte 0x5 0.--7. 1. "rx2_pm_error_counter_7_0,Error counter value (volatile)" line.byte 0x6 "RD_RX_LN2_LN_8,Lane 2 observability" hexmask.byte 0x6 0.--7. 1. "rx2_pm_error_counter_15_8,Error counter value (volatile)" line.byte 0x7 "RD_RX_LN2_LN_9,Lane 2 observability" bitfld.byte 0x7 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x7 2.--6. 1. "rx2_rxhs_ddl_phase_clk_if_4_0,Clock DDL setting chosen (volatile)" newline bitfld.byte 0x7 1. "rx2_rxhs_ddl_phase_change_p_if,DDL setting change latch pulse (volatile)" "0,1" newline bitfld.byte 0x7 0. "rx2_pm_start,Pattern matcher start flag observation (volatile)" "0,1" line.byte 0x8 "RD_RX_LN2_LN_10,Lane 2 observability" hexmask.byte 0x8 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x8 0.--3. 1. "rx2_rxhs_ddl_phase_data_if,Data DDl setting chosen (volatile)" group.byte 0x97B++0x3 line.byte 0x0 "RX_LN2_OFFST_CAL_0,Lane 2 offset compensation control" bitfld.byte 0x0 7. "rx2_rxhs_data_offst_cal_en_ovr_en,Data offset calibration override enable control" "0,1" newline bitfld.byte 0x0 6. "rx2_cal_done_ovr,Calibration done override" "0,1" newline bitfld.byte 0x0 5. "rx2_cal_done_ovr_en,Calibration done override enable control" "0,1" newline bitfld.byte 0x0 4. "rx2_start_cal_ovr_rw,RX start calibration override" "0,1" newline bitfld.byte 0x0 3. "rx2_start_cal_ovr_en_rw,RX start calibration override enable" "0,1" newline rbitfld.byte 0x0 0.--2. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x1 "RX_LN2_OFFST_CAL_1,Lane 2 offset compensation control" bitfld.byte 0x1 7. "rx2_rxhs_data_offst_cal_ovr_en,Offset calibration setting override" "0,1" newline hexmask.byte 0x1 1.--6. 1. "rx2_rxhs_data_offst_cal_ovr_5_0,Offset calibration override value" newline bitfld.byte 0x1 0. "rx2_rxhs_data_offst_cal_en_ovr,Data offset calibration override enable control" "0,1" line.byte 0x2 "RX_LN2_OFFST_CAL_2,Lane 2 offset compensation control" hexmask.byte 0x2 0.--7. 1. "rx2_rxhs_data_ovr,RX HS data override" line.byte 0x3 "RX_LN2_OFFST_CAL_3,Lane 2 offset compensation control" hexmask.byte 0x3 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x3 1. "rx2_rxhs_repeatcal,RX HS repeat calibration" "0,1" newline bitfld.byte 0x3 0. "rx2_rxhs_data_ovr_en,RX HS data override enable" "0,1" rgroup.byte 0x99F++0x3 line.byte 0x0 "RD_RX_LN2_OFFST_CAL_0,Lane 2 offset compensation observability" hexmask.byte 0x0 3.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 2. "rx2_cal_error,Offset calibration algorithm error (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx2_cal_done,Offset calibration algorithm done (volatile)" "0,1" newline bitfld.byte 0x0 0. "rx2_start_cal,Offset calibration algorithm start (volatile)" "0,1" line.byte 0x1 "RD_RX_LN2_OFFST_CAL_1,Lane 2 offset compensation observability" hexmask.byte 0x1 0.--7. 1. "rx2_rxhs_data_int_7_0,HS-RX data received (AFE output) (volatile)" line.byte 0x2 "RD_RX_LN2_OFFST_CAL_2,Lane 2 offset compensation observability" bitfld.byte 0x2 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x2 6. "rx2_rxhs_data_offst_cal_en,Offset calibration algorithm enable (volatile)" "0,1" newline hexmask.byte 0x2 0.--5. 1. "rx2_rxhs_data_offst_cal_5_0,Offset calibration algorithm setting chosen (volatile)" line.byte 0x3 "RD_RX_LN2_OFFST_CAL_3,Lane 2 offset compensation observability" hexmask.byte 0x3 0.--7. 1. "rx2_total_ones_7_0,Offset calibration algorithm counter of 1s (volatile)" rgroup.byte 0x9E0++0x5 line.byte 0x0 "RD_RX_LN2_DDL_0,Lane 2 DDL tune observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx2_ddl_start_cal_if,DDL tune digital algorithm start (volatile)" "0,1" newline bitfld.byte 0x0 2. "rx2_ddl_finished_if,DDL tune done indication (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx2_ddl_error_flag_if,DDL tune error (volatile)" "0,1" newline bitfld.byte 0x0 0. "ddl_tune_en_ln2_if,DDL tune analog circuitry enable indication (volatile)" "0,1" line.byte 0x1 "RD_RX_LN2_DDL_1,Lane 2 DDL tune observability" hexmask.byte 0x1 0.--7. 1. "rx2_freq_meas_out_if_7_0,RX DDL tunning oscillation measurement (volatile)" line.byte 0x2 "RD_RX_LN2_DDL_2,Lane 2 DDL tune observability" hexmask.byte 0x2 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x2 0.--3. 1. "rx2_freq_meas_out_if_11_8,RX DDL tunning oscillation measurement (volatile)" line.byte 0x3 "RD_RX_LN2_DDL_3,Lane 2 DDL tune observability" hexmask.byte 0x3 0.--7. 1. "rx2_osc_freq_target_if_7_0,RX oscillator frequency target obs (volatile)" line.byte 0x4 "RD_RX_LN2_DDL_4,Lane 2 DDL tune observability" hexmask.byte 0x4 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x4 0.--3. 1. "rx2_osc_freq_target_if_11_8,RX oscillator frequency target obs (volatile)" line.byte 0x5 "RD_RX_LN2_DDL_5,Lane 2 DDL tune observability" bitfld.byte 0x5 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline hexmask.byte 0x5 0.--4. 1. "rx2_rxhs_ddl_tune_if_4_0,RX HS DDL tunning setting (volatile)" group.byte 0xA06++0x1 line.byte 0x0 "RX_LN2_DDL_0,Lane 2 DDL tune control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx2_rxhs_ddl_tune_en_if,RX HS DDL tune enable" "0,1" newline bitfld.byte 0x0 4. "rx2_rxhs_ddl_tune_en_bypass,RX HS DDL tune enable bypass" "0,1" newline bitfld.byte 0x0 3. "rx2_ddl_start_cal_ovr_rw,RX DDL tunning calibration start override" "0,1" newline bitfld.byte 0x0 2. "rx2_ddl_start_cal_ovr_en_rw,RX DDL tunning calibration start override enable" "0,1" newline bitfld.byte 0x0 1. "rx2_ddl_finished_ovr,RX DDL tunning done override" "0,1" newline bitfld.byte 0x0 0. "rx2_ddl_finished_ovr_en,RX DDL tunning done override enable" "0,1" line.byte 0x1 "RX_LN2_DDL_1,Lane 2 DDL tune control" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "rx2_rxhs_ddl_tune_ovr_en,RX HS DDL tune override enable control" "0,1" newline hexmask.byte 0x1 0.--4. 1. "rx2_rxhs_ddl_tune_ovr,RX HS DDL tune override for lane 2" group.byte 0xA0A++0x2 line.byte 0x0 "RX_LN2_DDL_4,Lane 2 DDL tune control" hexmask.byte 0x0 0.--7. 1. "rx2_osc_freq_target_if_ovr__7_0,Target oscillating frequency override" line.byte 0x1 "RX_LN2_DDL_5,Lane 2 DDL tune control" hexmask.byte 0x1 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x1 0.--3. 1. "rx2_osc_freq_target_if_ovr__11_8,Oscillating frequency override Target" line.byte 0x2 "RX_LN2_DDL_6,Lane 2 DDL tune control" hexmask.byte 0x2 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0. "rx2_osc_freq_target_if_ovr_en,Override for oscillation frequency target" "0,1" group.byte 0xB01++0x1 line.byte 0x0 "RX_LN3_LN_0,Lane 3 control" bitfld.byte 0x0 7. "hsrx_en_bypass_ln3,HS RX enable bypass" "0,1" newline bitfld.byte 0x0 6. "bintpon_ln3,Bias block power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x0 5. "bintpon_bypass_ln3,Bias block power-on bypass override" "0,1" newline hexmask.byte 0x0 1.--4. 1. "atb_sel_ln3,Analog Test Bus signals selection:" newline rbitfld.byte 0x0 0. "reserved_0,Reserved field" "0,1" line.byte 0x1 "RX_LN3_LN_1,Lane 3 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "hsrxpon_if_ln3,Power on of the RX HS" "0,1" newline bitfld.byte 0x1 3. "hsrxpon_bypass_ln3,Power on of the RX HS bypass control" "0,1" newline bitfld.byte 0x1 2. "hsrxenterm_if_ln3,RX HS enable term" "0,1" newline bitfld.byte 0x1 1. "hsrxenterm_bypass_ln3,Bypass control of RX high speed enable term" "0,1" newline bitfld.byte 0x1 0. "hsrx_en_if_ln3_tester,HS RX enable for tester" "0,1" group.byte 0xB04++0x1 line.byte 0x0 "RX_LN3_LN_3,Lane 3 control" bitfld.byte 0x0 7. "lprxponcd_bypass_ln3,LP RX Contention Detector power-on bypass override" "0,1" newline hexmask.byte 0x0 0.--6. 1. "reserved_0,Reserved field" line.byte 0x1 "RX_LN3_LN_4,Lane 3 control" rbitfld.byte 0x1 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x1 4. "lprxponulp_ln3,LP RX ULP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 3. "lprxponulp_bypass_ln3,LP RX ULP power-on bypass override" "0,1" newline bitfld.byte 0x1 2. "lprxponlp_ln3,LP RX LP power-on; can be overridden if bypass signal is 1'b1" "0,1" newline bitfld.byte 0x1 1. "lprxponlp_bypass_ln3,LP RX LP power-on bypass override" "0,1" newline bitfld.byte 0x1 0. "lprxponcd_ln3,LP RX Contention Detector power-on; can be overridden if bypass signal is 1'b1" "0,1" group.byte 0xB07++0x6 line.byte 0x0 "RX_LN3_LN_6,Lane 3 control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx3_rxhs_feed_int_clk_ovr_en,HS-RX source clock override enable control for lane 3" "0,1" newline bitfld.byte 0x0 4. "rx3_rxhs_feed_int_clk_ovr,HS-RX source clock override control for lane 3" "0,1" newline bitfld.byte 0x0 1.--3. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x0 0. "polarity_ln3,Polarity change control 0 - Two PHYs with P/N ports connected to P/N respectively 1 - Two PHYs with P/N ports connected to N/P respectively" "0: Two PHYs with P/N ports connected to P/N..,?" line.byte 0x1 "RX_LN3_LN_7,Lane 3 control" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "rx3_rxhs_clk_from_long_channel_if,RX HS clock from long channel" "0,1" newline bitfld.byte 0x1 4. "recal_ln3_ovr,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x1 3. "recal_ln3_ovr_en,Override Enable voltage control for recal" "0,1" newline bitfld.byte 0x1 0.--2. "reserved_1,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x2 "RX_LN3_LN_8,Lane 3 control" bitfld.byte 0x2 7. "rx_des_en_ln3,RX deserializer enable" "0,1" newline bitfld.byte 0x2 6. "rx_des_en_bypass_ln3,RX deserializer enable bypass control" "0,1" newline rbitfld.byte 0x2 3.--5. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x2 0.--2. "rx3_rxhs_data_eq_if,RX HS data equalizer" "0,1,2,3,4,5,6,7" line.byte 0x3 "RX_LN3_LN_9,Lane 3 control" bitfld.byte 0x3 7. "rx3_pm_sample_error_counter,strobe to read the error counter" "0,1" newline bitfld.byte 0x3 6. "rx3_pm_start_control_ovr_en,Pattern matcher start override enable." "0,1" newline bitfld.byte 0x3 5. "rx3_pm_start_control_ovr,Pattern matcher start override." "0,1" newline hexmask.byte 0x3 1.--4. 1. "rx3_pm_mode_r,Configuration mode for the pattern matcher" newline bitfld.byte 0x3 0. "rx3_data_retiming_out_swap_sel,retiming mux control" "0,1" line.byte 0x4 "RX_LN3_LN_10,Lane 3 control" bitfld.byte 0x4 7. "rx3_rxhs_ddl_phase_clk_ovr_en,RX HS DDL phase data override control" "0,1" newline hexmask.byte 0x4 2.--6. 1. "rx3_rxhs_ddl_phase_clk_ovr,RX HS DDL phase clock override" newline bitfld.byte 0x4 1. "rx3_rxhs_ddl_phase_change_p_ovr_en,RX HS DDL phase changed override control" "0,1" newline bitfld.byte 0x4 0. "rx3_rxhs_ddl_phase_change_p_ovr,RX HS DDL phase changed override control" "0,1" line.byte 0x5 "RX_LN3_LN_11,Lane 3 control" rbitfld.byte 0x5 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x5 4. "rx3_rxhs_ddl_phase_data_ovr_en,Override enable for ddl phase data" "0,1" newline hexmask.byte 0x5 0.--3. 1. "rx3_rxhs_ddl_phase_data_ovr,RX HS DDL phase clock override" line.byte 0x6 "RX_LN3_LN_12,Lane 3 control" bitfld.byte 0x6 7. "rx3_pm_man_error_latch,Allows manual pattern matcher error counter latch" "0,1" newline hexmask.byte 0x6 3.--6. 1. "rx3_lb_prog_if,lane 3 receiver biasing currents" newline bitfld.byte 0x6 2. "rx3_lb_res_cm_en_if,lane 3 static termination driver middle point pull down enable" "0,1" newline bitfld.byte 0x6 1. "rx3_lb_res_dn_en_if,lane 3 static termination driver test dn line enable" "0,1" newline bitfld.byte 0x6 0. "rx3_lb_res_dp_en_if,lane 3 static termination driver test dp line enable" "0,1" rgroup.byte 0xB2B++0x0 line.byte 0x0 "RD_RX_LN3_LN_0,Lane 3 observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx3_rxhs_deserial_data_en_if,HS-RX deserializer reset observation for lane 3 (volatile)" "0,1" newline bitfld.byte 0x0 2. "hsrx_en_if_ln3,HS-RX enable of lane 3 (volatile)" "0,1" newline bitfld.byte 0x0 1. "enable_ln3,Signal that passes AFE control from soft macro to lane 3 (volatile)" "0,1" newline bitfld.byte 0x0 0. "bintpon_if_ln3,Level shifter enable of lane 3 (volatile)" "0,1" rgroup.byte 0xB2D++0x8 line.byte 0x0 "RD_RX_LN3_LN_2,Lane 3 observability" bitfld.byte 0x0 7. "rx3_rxhs_rx_enterm_if,RX HS enable term (volatile)" "0,1" newline bitfld.byte 0x0 6. "rx3_rxhs_rx_enlogic_if,RX HS enlogic (volatile)" "0,1" newline bitfld.byte 0x0 5. "rx3_rxhs_rx_en_if,RX HS enable (volatile)" "0,1" newline hexmask.byte 0x0 0.--4. 1. "reserved_0,Reserved field" line.byte 0x1 "RD_RX_LN3_LN_3,Lane 3 observability" bitfld.byte 0x1 6.--7. "lprxdoutlp_ln3_1_0,LP-RX receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x1 4.--5. "lprxdoutcd_ln3_1_0,LP-CD receiver outputs (volatile)" "0,1,2,3" newline bitfld.byte 0x1 3. "rx3_rxlp_ponulp_if,LP-RX ULP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 2. "rx3_rxlp_ponlp_if,LP-RX LP receiver power on (volatile)" "0,1" newline bitfld.byte 0x1 1. "rx3_rxlp_poncd_if,LP-RX contention detector power on (volatile)" "0,1" newline bitfld.byte 0x1 0. "rx3_rxhs_rx_pon_if,RX HS power on (volatile)" "0,1" line.byte 0x2 "RD_RX_LN3_LN_4,Lane 3 observability" bitfld.byte 0x2 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline bitfld.byte 0x2 4. "rx3_deskewcalfailed_if,Deskew calibration failed (volatile)" "0,1" newline bitfld.byte 0x2 3. "rx3_deskewcaldone_if,Deskew calibration done (volatile)" "0,1" newline bitfld.byte 0x2 2. "lsrxclk_ln3,Low speed clock (XOR'ed from data lines) (volatile)" "0,1" newline bitfld.byte 0x2 0.--1. "lprxdoutulp_ln3_1_0,LP-RX ULP receiver outputs (volatile)" "0,1,2,3" line.byte 0x3 "RD_RX_LN3_LN_5,Lane 3 observability" hexmask.byte 0x3 0.--7. 1. "rx3_rxhs_data_if_7_0,RX HS data (volatile)" line.byte 0x4 "RD_RX_LN3_LN_6,Lane 3 observability" bitfld.byte 0x4 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x4 5. "rx3_pm_error_pm,Observation of the error flag generated by the master (volatile)" "0,1" newline bitfld.byte 0x4 3.--4. "reserved_1,Reserved field (volatile)" "0,1,2,3" newline bitfld.byte 0x4 2. "rx3_rxhs_word_clk_if,RX HS word clock (volatile)" "0,1" newline bitfld.byte 0x4 1. "rx3_rxhs_feed_int_clk_if,RX HS internal clock feedback (volatile)" "0,1" newline bitfld.byte 0x4 0. "rx3_rxhs_des_en_if,RX HS deserializer enable (volatile)" "0,1" line.byte 0x5 "RD_RX_LN3_LN_7,Lane 3 observability" hexmask.byte 0x5 0.--7. 1. "rx3_pm_error_counter_7_0,Error counter value (volatile)" line.byte 0x6 "RD_RX_LN3_LN_8,Lane 3 observability" hexmask.byte 0x6 0.--7. 1. "rx3_pm_error_counter_15_8,Error counter value (volatile)" line.byte 0x7 "RD_RX_LN3_LN_9,Lane 3 observability" bitfld.byte 0x7 7. "reserved_0,Reserved field" "0,1" newline hexmask.byte 0x7 2.--6. 1. "rx3_rxhs_ddl_phase_clk_if_4_0,Clock DDL setting chosen (volatile)" newline bitfld.byte 0x7 1. "rx3_rxhs_ddl_phase_change_p_if,DDL setting change latch pulse (volatile)" "0,1" newline bitfld.byte 0x7 0. "rx3_pm_start,Pattern matcher start flag observation (volatile)" "0,1" line.byte 0x8 "RD_RX_LN3_LN_10,Lane 3 observability" hexmask.byte 0x8 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x8 0.--3. 1. "rx3_rxhs_ddl_phase_data_if,Data DDl setting chosen (volatile)" group.byte 0xB7B++0x3 line.byte 0x0 "RX_LN3_OFFST_CAL_0,Lane 3 offset compensation control" bitfld.byte 0x0 7. "rx3_rxhs_data_offst_cal_en_ovr_en,Data offset calibration override enable control" "0,1" newline bitfld.byte 0x0 6. "rx3_cal_done_ovr,Calibration done override" "0,1" newline bitfld.byte 0x0 5. "rx3_cal_done_ovr_en,Calibration done override enable control" "0,1" newline bitfld.byte 0x0 4. "rx3_start_cal_ovr_rw,RX start calibration override" "0,1" newline bitfld.byte 0x0 3. "rx3_start_cal_ovr_en_rw,RX start calibration override enable" "0,1" newline rbitfld.byte 0x0 0.--2. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" line.byte 0x1 "RX_LN3_OFFST_CAL_1,Lane 3 offset compensation control" bitfld.byte 0x1 7. "rx3_rxhs_data_offst_cal_ovr_en,Offset calibration setting override" "0,1" newline hexmask.byte 0x1 1.--6. 1. "rx3_rxhs_data_offst_cal_ovr_5_0,Offset calibration override value" newline bitfld.byte 0x1 0. "rx3_rxhs_data_offst_cal_en_ovr,Data offset calibration override enable control" "0,1" line.byte 0x2 "RX_LN3_OFFST_CAL_2,Lane 3 offset compensation control" hexmask.byte 0x2 0.--7. 1. "rx3_rxhs_data_ovr,RX HS data override" line.byte 0x3 "RX_LN3_OFFST_CAL_3,Lane 3 offset compensation control" hexmask.byte 0x3 2.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x3 1. "rx3_rxhs_repeatcal,RX HS repeat calibration" "0,1" newline bitfld.byte 0x3 0. "rx3_rxhs_data_ovr_en,RX HS data override enable" "0,1" rgroup.byte 0xB9F++0x3 line.byte 0x0 "RD_RX_LN3_OFFST_CAL_0,Lane 3 offset compensation observability" hexmask.byte 0x0 3.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 2. "rx3_cal_error,Offset calibration algorithm error (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx3_cal_done,Offset calibration algorithm done (volatile)" "0,1" newline bitfld.byte 0x0 0. "rx3_start_cal,Offset calibration algorithm start (volatile)" "0,1" line.byte 0x1 "RD_RX_LN3_OFFST_CAL_1,Lane 3 offset compensation observability" hexmask.byte 0x1 0.--7. 1. "rx3_rxhs_data_int_7_0,HS-RX data received (AFE output) (volatile)" line.byte 0x2 "RD_RX_LN3_OFFST_CAL_2,Lane 3 offset compensation observability" bitfld.byte 0x2 7. "reserved_0,Reserved field" "0,1" newline bitfld.byte 0x2 6. "rx3_rxhs_data_offst_cal_en,Offset calibration algorithm enable (volatile)" "0,1" newline hexmask.byte 0x2 0.--5. 1. "rx3_rxhs_data_offst_cal_5_0,Offset calibration algorithm setting chosen (volatile)" line.byte 0x3 "RD_RX_LN3_OFFST_CAL_3,Lane 3 offset compensation observability" hexmask.byte 0x3 0.--7. 1. "rx3_total_ones_7_0,Offset calibration algorithm counter of 1s (volatile)" rgroup.byte 0xBE0++0x5 line.byte 0x0 "RD_RX_LN3_DDL_0,Lane 3 DDL tune observability" hexmask.byte 0x0 4.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x0 3. "rx3_ddl_start_cal_if,DDL tune digital algorithm start (volatile)" "0,1" newline bitfld.byte 0x0 2. "rx3_ddl_finished_if,DDL tune done indication (volatile)" "0,1" newline bitfld.byte 0x0 1. "rx3_ddl_error_flag_if,DDL tune error (volatile)" "0,1" newline bitfld.byte 0x0 0. "ddl_tune_en_ln3_if,DDL tune analog circuitry enable indication (volatile)" "0,1" line.byte 0x1 "RD_RX_LN3_DDL_1,Lane 3 DDL tune observability" hexmask.byte 0x1 0.--7. 1. "rx3_freq_meas_out_if_7_0,RX DDL tunning oscillation measurement (volatile)" line.byte 0x2 "RD_RX_LN3_DDL_2,Lane 3 DDL tune observability" hexmask.byte 0x2 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x2 0.--3. 1. "rx3_freq_meas_out_if_11_8,RX DDL tunning oscillation measurement (volatile)" line.byte 0x3 "RD_RX_LN3_DDL_3,Lane 3 DDL tune observability" hexmask.byte 0x3 0.--7. 1. "rx3_osc_freq_target_if_7_0,RX oscillator frequency target obs (volatile)" line.byte 0x4 "RD_RX_LN3_DDL_4,Lane 3 DDL tune observability" hexmask.byte 0x4 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x4 0.--3. 1. "rx3_osc_freq_target_if_11_8,RX oscillator frequency target obs (volatile)" line.byte 0x5 "RD_RX_LN3_DDL_5,Lane 3 DDL tune observability" bitfld.byte 0x5 5.--7. "reserved_0,Reserved field" "0,1,2,3,4,5,6,7" newline hexmask.byte 0x5 0.--4. 1. "rx3_rxhs_ddl_tune_if_4_0,RX HS DDL tunning setting (volatile)" group.byte 0xC06++0x1 line.byte 0x0 "RX_LN3_DDL_0,Lane 3 DDL tune control" rbitfld.byte 0x0 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x0 5. "rx3_rxhs_ddl_tune_en_if,RX HS DDL tune enable" "0,1" newline bitfld.byte 0x0 4. "rx3_rxhs_ddl_tune_en_bypass,RX HS DDL tune enable bypass" "0,1" newline bitfld.byte 0x0 3. "rx3_ddl_start_cal_ovr_rw,RX DDL tunning calibration start override" "0,1" newline bitfld.byte 0x0 2. "rx3_ddl_start_cal_ovr_en_rw,RX DDL tunning calibration start override enable" "0,1" newline bitfld.byte 0x0 1. "rx3_ddl_finished_ovr,RX DDL tunning done override" "0,1" newline bitfld.byte 0x0 0. "rx3_ddl_finished_ovr_en,RX DDL tunning done override enable" "0,1" line.byte 0x1 "RX_LN3_DDL_1,Lane 3 DDL tune control" rbitfld.byte 0x1 6.--7. "reserved_0,Reserved field" "0,1,2,3" newline bitfld.byte 0x1 5. "rx3_rxhs_ddl_tune_ovr_en,RX HS DDL tune override enable control" "0,1" newline hexmask.byte 0x1 0.--4. 1. "rx3_rxhs_ddl_tune_ovr,RX HS DDL tune override for lane 3" group.byte 0xC0A++0x2 line.byte 0x0 "RX_LN3_DDL_4,Lane 3 DDL tune control" hexmask.byte 0x0 0.--7. 1. "rx3_osc_freq_target_if_ovr__7_0,Target oscillating frequency override" line.byte 0x1 "RX_LN3_DDL_5,Lane 3 DDL tune control" hexmask.byte 0x1 4.--7. 1. "reserved_0,Reserved field" newline hexmask.byte 0x1 0.--3. 1. "rx3_osc_freq_target_if_ovr__11_8,Oscillating frequency override Target" line.byte 0x2 "RX_LN3_DDL_6,Lane 3 DDL tune control" hexmask.byte 0x2 1.--7. 1. "reserved_0,Reserved field" newline bitfld.byte 0x2 0. "rx3_osc_freq_target_if_ovr_en,Override for oscillation frequency target" "0,1" tree.end tree "DRAM (DRAM Domain)" base ad:0x0 tree "DDR_BLK_CTRL_DDRMIX" base ad:0x4E010000 group.long 0x0++0x3 line.long 0x0 "HWFFC_CTRL,DDRPHY DfiClk. DflCtlClk HWFFC Control" bitfld.long 0x0 1. "HWFFC_SEL,DDRPHY DfiClk DfiCtlClk HWFFC Select" "0,1" bitfld.long 0x0 0. "HWFFC_EN,DDRPHY DfiClk DfiCtlClk HWFFC Enable" "0,1" group.long 0xC++0x7 line.long 0x0 "DDRC_STOP_CTRL,DDR Controller ipg_stop SW control" hexmask.long.tbyte 0x0 8.--31. 1. "DDRC_STOP_HOLD_PERIOD,DDR Controller ipg_stop hold period before clearing." bitfld.long 0x0 4. "DDRC_STOP_HOLD_EN,DDR Controller ipg_stop holds for a period of time before clearing." "0,1" rbitfld.long 0x0 2. "DDRC_DRAM_SELF_REFRESH,DDR Controller ddrc_dram_self_refresh." "0,1" rbitfld.long 0x0 1. "DDRC_STOP_ACK,DDR Controller ipg_stop_ack." "0,1" newline bitfld.long 0x0 0. "DDRC_STOP,DDR Controller ipg_stop." "0,1" line.long 0x4 "AUTO_CG_CTRL,DDR Controller automatic clock gating control when no AXI transmit" bitfld.long 0x4 30. "GATE_DDRPHY_APBCLK,DDR Auto Clock Gating is allowed for DDRPHY APBCLK clock." "0,1" bitfld.long 0x4 28. "GATE_DDRPHY_DFICLK,DDR Auto Clock Gating is allowed for DDRPHY DfiClk clock." "0,1" bitfld.long 0x4 26. "GATE_DDRC_IPS_CLK,DDR Auto Clock Gating is allowed for DDR Controller IPS clock ips_clk_ddrc." "0,1" bitfld.long 0x4 24. "GATE_DDRC_CLK,DDR Auto Clock Gating is allowed for DDR Controller clock ipg_clk_ddrc." "0,1" newline bitfld.long 0x4 17. "HWFFC_ACG_FORCE_B,DDR Controller hwffc and auto CG send ipg_stop allow bit. Can only programmed once." "0,1" bitfld.long 0x4 16. "AUTO_CG_ENA,DDR Controller automatic clock gating enable bit." "0,1" hexmask.long.word 0x4 0.--15. 1. "SSI_IDLE_STRAP,Number of cycles for SSI being idle before DDRC clock gating." group.long 0x18++0x1F line.long 0x0 "DDRC_EXCLUSIVE_EN,DDRC AXI exclusive access monitor enable" bitfld.long 0x0 0. "EXCLUSIVE_EN,DDRC AXI exclusive access monitor enable" "0,1" line.long 0x4 "DDRC_URGENT_EN,DDRC real_time read urgent and read urgent enable" bitfld.long 0x4 1. "AR_RT_URGENT_EN,DDRC ipa_ar_rt_urgent is enabled" "0,1" bitfld.long 0x4 0. "READ_URGENT_EN,DDRC ddrc_read_urgent is enabled" "0,1" line.long 0x8 "RT_MASTER_ID_0_1,DDRC real_time master 6bit extend-ID range 0 and range 1" bitfld.long 0x8 31. "RANGE_1_EN,DDRC real_time master ID range 1 enable" "0,1" hexmask.long.byte 0x8 24.--29. 1. "RANGE_1_MASK,DDRC real_time master ID range 1 ID mask" hexmask.long.byte 0x8 16.--21. 1. "RANGE_1_ID,DDRC real_time master ID range 1 ID" bitfld.long 0x8 15. "RANGE_0_EN,DDRC real_time master ID range 0 enable" "0,1" newline hexmask.long.byte 0x8 8.--13. 1. "RANGE_0_MASK,DDRC real_time master ID range 0 ID mask" hexmask.long.byte 0x8 0.--5. 1. "RANGE_0_ID,DDRC real_time master ID range 0 ID" line.long 0xC "RT_MASTER_ID_2_3,DDRC real_time master 6bit extend-ID range 2 and range 3" bitfld.long 0xC 31. "RANGE_3_EN,DDRC real_time master ID range 3 enable" "0,1" hexmask.long.byte 0xC 24.--29. 1. "RANGE_3_MASK,DDRC real_time master ID range 3 ID mask" hexmask.long.byte 0xC 16.--21. 1. "RANGE_3_ID,DDRC real_time master ID range 3 ID" bitfld.long 0xC 15. "RANGE_2_EN,DDRC real_time master ID range 2 enable" "0,1" newline hexmask.long.byte 0xC 8.--13. 1. "RANGE_2_MASK,DDRC real_time master ID range 2 ID mask" hexmask.long.byte 0xC 0.--5. 1. "RANGE_2_ID,DDRC real_time master ID range 2 ID" line.long 0x10 "AXI_PARITY_ERR_CLR,DDRMIX AXI parity check clear register" bitfld.long 0x10 19. "ERR_HOLD_EN,DDRMIX DDRC error hold enable" "0,1" bitfld.long 0x10 16.--18. "ERR_HOLD,DDRMIX AXI parity error hold time" "0,1,2,3,4,5,6,7" bitfld.long 0x10 8. "SLV_ERR_CLR,DDRMIX AXI parity slave d_ip_axi_parity_slave error clear" "0,1" bitfld.long 0x10 0. "MST_ERR_CLR,DDRMIX AXI parity master d_ip_axi_parity_master error clear" "0,1" line.long 0x14 "AXI_PARITY_ERR_INJECT,DDRMIX AXI parity error injection register" bitfld.long 0x14 16. "RDATA_ERR_INJ,DDRMIX AXI parity error injection on rdatachk[0]" "0,1" bitfld.long 0x14 0. "WDATA_ERR_INJ,DDRMIX AXI parity error injection on wdatachk[0]" "0,1" line.long 0x18 "RT_MASTER_ID_4_5,DDRC real_time master 6bit extend-ID range 4 and range 5" bitfld.long 0x18 31. "RANGE_5_EN,DDRC real_time master ID range 5 enable" "0,1" hexmask.long.byte 0x18 24.--29. 1. "RANGE_5_MASK,DDRC real_time master ID range 5 ID mask" hexmask.long.byte 0x18 16.--21. 1. "RANGE_5_ID,DDRC real_time master ID range 5 ID" bitfld.long 0x18 15. "RANGE_4_EN,DDRC real_time master ID range 4 enable" "0,1" newline hexmask.long.byte 0x18 8.--13. 1. "RANGE_4_MASK,DDRC real_time master ID range 4 ID mask" hexmask.long.byte 0x18 0.--5. 1. "RANGE_4_ID,DDRC real_time master ID range 4 ID" line.long 0x1C "RT_MASTER_ID_6_7,DDRC real_time master 6bit extend-ID range 6 and range 7" bitfld.long 0x1C 31. "RANGE_7_EN,DDRC real_time master ID range 7 enable" "0,1" hexmask.long.byte 0x1C 24.--29. 1. "RANGE_7_MASK,DDRC real_time master ID range 7 ID mask" hexmask.long.byte 0x1C 16.--21. 1. "RANGE_7_ID,DDRC real_time master ID range 7 ID" bitfld.long 0x1C 15. "RANGE_6_EN,DDRC real_time master ID range 6 enable" "0,1" newline hexmask.long.byte 0x1C 8.--13. 1. "RANGE_6_MASK,DDRC real_time master ID range 6 ID mask" hexmask.long.byte 0x1C 0.--5. 1. "RANGE_6_ID,DDRC real_time master ID range 6 ID" rgroup.long 0x38++0x3 line.long 0x0 "FUSE_DISABLE_DDRMIX,Fuse to ddrmix_blk_ctrl" bitfld.long 0x0 0.--1. "FUSE_DISABLE_DDRMIX,Read only reg for fuse mapped to ddrmix_blk_ctrl." "0,1,2,3" tree.end tree "DDR_CMU" tree "CMU_1" base ad:0x4E060000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree "CMU_2" base ad:0x4E070000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree.end tree "DDR_DDRC" base ad:0x4E080000 repeat 2. (list 0x0 0x1)(list ad:0x4E080000 ad:0x4E080008) tree "CS_BNDS[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "CS_BNDS,Rank n Memory Bounds" hexmask.long.word 0x0 16.--31. 1. "SA,Starting Address" hexmask.long.word 0x0 0.--15. 1. "EA,Ending Address" tree.end repeat.end base ad:0x4E080000 group.long 0x20++0x47 line.long 0x0 "REMAP_0A,Remap Region 0A Configuration" bitfld.long 0x0 31. "REG_0_REMAP_EN,Region 0 Remap Enable" "0: Disables,1: Enables" newline hexmask.long.word 0x0 0.--11. 1. "REG_0_REMAP_ADDR,Region 0 Remap Starting Address" line.long 0x4 "REMAP_0B,Remap Region 0B Configuration" hexmask.long.word 0x4 16.--27. 1. "REG_0_SA,Region 0 Starting Address" newline hexmask.long.word 0x4 0.--11. 1. "REG_0_EA,Region 0 Ending Address" line.long 0x8 "REMAP_1A,Remap Region 1A Configuration" bitfld.long 0x8 31. "REG_1_REMAP_EN,Region 1 Remap Enable" "0: Disables,1: Enables" newline hexmask.long.word 0x8 0.--11. 1. "REG_1_REMAP_ADDR,Region 1 Remap Starting Address" line.long 0xC "REMAP_1B,Remap Region 1B Configuration" hexmask.long.word 0xC 16.--27. 1. "REG_1_SA,Region 1 Starting Address" newline hexmask.long.word 0xC 0.--11. 1. "REG_1_EA,Region 1 Ending Address" line.long 0x10 "REMAP_2A,Remap Region 2A Configuration" bitfld.long 0x10 31. "REG_2_REMAP_EN,Region 2 Remap Enable" "0: Disables,1: Enables" newline hexmask.long.word 0x10 0.--11. 1. "REG_2_REMAP_ADDR,Region 2 Remap Starting Address" line.long 0x14 "REMAP_2B,Remap Region 2B Configuration" hexmask.long.word 0x14 16.--27. 1. "REG_2_SA,Region 2 Starting Address" newline hexmask.long.word 0x14 0.--11. 1. "REG_2_EA,Region 2 Ending Address" line.long 0x18 "REMAP_3A,Remap Region 3A Configuration" bitfld.long 0x18 31. "REG_3_REMAP_EN,Region 3 Remap Enable" "0: Disables,1: Enables" newline hexmask.long.word 0x18 0.--11. 1. "REG_3_REMAP_ADDR,Region 3 Remap Starting Address" line.long 0x1C "REMAP_3B,Remap Region 3B Configuration" hexmask.long.word 0x1C 16.--27. 1. "REG_3_SA,Region 3 Starting Address" newline hexmask.long.word 0x1C 0.--11. 1. "REG_3_EA,Region 3 Ending Address" line.long 0x20 "DDR_ADDR_DEC_0,DDRC Address Decode 0" hexmask.long.byte 0x20 26.--31. 1. "ROW17_OVRD,Row 17 Override" newline hexmask.long.byte 0x20 18.--23. 1. "ROW16_OVRD,Row 16 Override" newline hexmask.long.byte 0x20 10.--15. 1. "ROW15_OVRD,Row 15 Override" newline hexmask.long.byte 0x20 2.--7. 1. "ROW14_OVRD,Row 14 Override" line.long 0x24 "DDR_ADDR_DEC_1,DDRC Address Decode 1" hexmask.long.byte 0x24 26.--31. 1. "ROW13_OVRD,Row 13 Override" newline hexmask.long.byte 0x24 18.--23. 1. "ROW12_OVRD,Row 12 Override" newline hexmask.long.byte 0x24 10.--15. 1. "ROW11_OVRD,Row 11 Override" newline hexmask.long.byte 0x24 2.--7. 1. "ROW10_OVRD,Row 10 Override" line.long 0x28 "DDR_ADDR_DEC_2,DDRC Address Decode 2" hexmask.long.byte 0x28 26.--31. 1. "ROW9_OVRD,Row 9 Override" newline hexmask.long.byte 0x28 18.--23. 1. "ROW8_OVRD,Row 8 Override" newline hexmask.long.byte 0x28 10.--15. 1. "ROW7_OVRD,Row 7 Override" newline hexmask.long.byte 0x28 2.--7. 1. "ROW6_OVRD,Row 6 Override" line.long 0x2C "DDR_ADDR_DEC_3,DDRC Address Decode 3" hexmask.long.byte 0x2C 26.--31. 1. "ROW5_OVRD,Row 5 Override" newline hexmask.long.byte 0x2C 18.--23. 1. "ROW4_OVRD,Row 4 Override" newline hexmask.long.byte 0x2C 10.--15. 1. "ROW3_OVRD,Row 3 Override" newline hexmask.long.byte 0x2C 2.--7. 1. "ROW2_OVRD,Row 2 Override" line.long 0x30 "DDR_ADDR_DEC_4,DDRC Address Decode 4" hexmask.long.byte 0x30 26.--31. 1. "ROW1_OVRD,Row 1 Override" newline hexmask.long.byte 0x30 18.--23. 1. "ROW0_OVRD,Row 0 Override" newline hexmask.long.byte 0x30 10.--15. 1. "COL10_OVRD,Col 10 Override" newline hexmask.long.byte 0x30 2.--7. 1. "COL9_OVRD,Col 9 Override" line.long 0x34 "DDR_ADDR_DEC_5,DDRC Address Decode 5" hexmask.long.byte 0x34 26.--31. 1. "COL8_OVRD,Col 8 Override" newline hexmask.long.byte 0x34 18.--23. 1. "COL7_OVRD,Col 7 Override" newline hexmask.long.byte 0x34 10.--15. 1. "COL6_OVRD,Col 6 Override" newline hexmask.long.byte 0x34 2.--7. 1. "COL5_OVRD,Col 5 Override" line.long 0x38 "DDR_ADDR_DEC_6,DDRC Address Decode 6" hexmask.long.byte 0x38 26.--31. 1. "COL4_OVRD,Col 4 Override" newline hexmask.long.byte 0x38 18.--23. 1. "COL3_OVRD,Col 3 Override" newline hexmask.long.byte 0x38 10.--15. 1. "COL2_OVRD,Col 2 Override" newline hexmask.long.byte 0x38 2.--7. 1. "COL1_OVRD,Col 1 Override" line.long 0x3C "DDR_ADDR_DEC_7,DDRC Address Decode 7" hexmask.long.byte 0x3C 26.--31. 1. "COL0_OVRD,Col 0 Override" newline hexmask.long.byte 0x3C 18.--23. 1. "BA1_OVRD,Bank 1 Override" newline hexmask.long.byte 0x3C 10.--15. 1. "BA0_OVRD,Bank 0 Override" newline hexmask.long.byte 0x3C 2.--7. 1. "CID1_OVRD,CID 1 Override" line.long 0x40 "DDR_ADDR_DEC_8,DDRC Address Decode 8" hexmask.long.byte 0x40 26.--31. 1. "CID0_OVRD,CID 0 Override" newline hexmask.long.byte 0x40 18.--23. 1. "CS1_OVRD,Interleaved Rank 1 Override" newline hexmask.long.byte 0x40 10.--15. 1. "CS0_OVRD,Interleaved Rank 0 Override" newline hexmask.long.byte 0x40 2.--7. 1. "BG1_OVRD,Bank Group 1 Override" line.long 0x44 "DDR_ADDR_DEC_9,DDRC Address Decode 9" hexmask.long.byte 0x44 26.--31. 1. "BG0_OVRD,Bank Group 0 Override" newline bitfld.long 0x44 0. "ADDR_DEC_OVRD,Address Decode Override" "0,1" group.long 0x80++0x7 line.long 0x0 "CS0_CONFIG,Rank 0 Configuration" bitfld.long 0x0 31. "CS_EN,Rank Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 23. "AP_EN,Auto-Precharge Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 8.--10. "ROW_BITS_CS,Row Bits" "0: 12,1: 13,2: 14,3: 15,4: 16,5: 17,?,?" newline bitfld.long 0x0 4.--5. "BG_BITS_CS,Bank Group Bits" "0: 0,1: Must be set to 1 to enable the 3rd bank address..,?,?" newline bitfld.long 0x0 0.--2. "COL_BITS_CS,Column Bits" "0: 8,1: 9,2: 10,3: 11,?,?,?,?" line.long 0x4 "CS1_CONFIG,Rank 1 Configuration" bitfld.long 0x4 31. "CS_EN,Rank Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 23. "AP_EN,Auto-Precharge Enable" "0: Disables,1: Enables" newline bitfld.long 0x4 8.--10. "ROW_BITS_CS,Row Bits" "0: 12,1: 13,2: 14,3: 15,4: 16,5: 17,?,?" newline bitfld.long 0x4 4.--5. "BG_BITS_CS,Bank Group Bits" "0: 0,1: Must be set to 1 to enable the 3rd bank address..,?,?" newline bitfld.long 0x4 0.--2. "COL_BITS_CS,Column Bits" "0: 8,1: 9,2: 10,3: 11,?,?,?,?" group.long 0x100++0x17 line.long 0x0 "TIMING_CFG_3,DDR SDRAM Timing Configuration 3" bitfld.long 0x0 28.--29. "EXT_PRETOACT,Extended Precharge-To-Activate Time" "0,1,2,3" newline bitfld.long 0x0 24.--26. "EXT_ACTTOPRE,Extended Activate-To-Precharge Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 22.--23. "EXT_ACTTORW,Extended Activate To Read Or Write Time" "0,1,2,3" newline hexmask.long.byte 0x0 16.--21. 1. "EXT_REFREC,Extended Refresh Recovery" newline bitfld.long 0x0 12.--14. "EXT_CASLAT,Extended CAS Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 11. "EXT_WR_LAT_2,Extended Write Latency 2" "0,1" newline bitfld.long 0x0 8.--9. "EXT_WRREC,Extended Write Recovery" "0,1,2,3" newline bitfld.long 0x0 4.--5. "EXT_CKE_PLS,Extended MCKE Pulse" "0,1,2,3" newline bitfld.long 0x0 3. "EXT_FOUR_ACT,Extended Four Activate" "0,1" newline bitfld.long 0x0 1. "EXT_ACTTOACT,Extended Activate-To-Activate Time" "0,1" newline bitfld.long 0x0 0. "EXT_WRTORD,Extended Write-To-Read Time" "0,1" line.long 0x4 "TIMING_CFG_0,DDR SDRAM Timing Configuration 0" bitfld.long 0x4 30.--31. "RWT,Read-To-Write Turnaround To Different Ranks" "0,1,2,3" newline bitfld.long 0x4 28.--29. "WRT,Write-To-Read Turnaround To Different Ranks" "0,1,2,3" newline bitfld.long 0x4 26.--27. "RRT,Read-To-Read Turnaround To Different Ranks" "0,1,2,3" newline bitfld.long 0x4 24.--25. "WWT,Write-To-Write Turnaround To Different Ranks" "0,1,2,3" newline hexmask.long.byte 0x4 20.--23. 1. "ACT_PD_EXIT,Active Powerdown Exit" newline hexmask.long.byte 0x4 16.--19. 1. "PRE_PD_EXIT,Precharge Power-Down Exit" newline bitfld.long 0x4 14.--15. "EXT_PRE_PD_EXIT,Extended Precharge Power-Down Exit" "0,1,2,3" newline bitfld.long 0x4 12. "EXT_ACT_PD_EXIT,Extended Active Power-Down Exit" "0,1" newline hexmask.long.byte 0x4 0.--5. 1. "MRS_CYC,MRW Cycle Time" line.long 0x8 "TIMING_CFG_1,DDR SDRAM Timing Configuration 1" hexmask.long.byte 0x8 28.--31. 1. "PRETOACT,Precharge-To-Activate Time" newline hexmask.long.byte 0x8 24.--27. 1. "ACTTOPRE,Activate-To-Precharge Time" newline hexmask.long.byte 0x8 20.--23. 1. "ACTTORW,Activate To Read Or Write" newline bitfld.long 0x8 17.--19. "CASLAT,CAS Latency" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 12.--15. 1. "REFREC,Refresh Recovery" newline hexmask.long.byte 0x8 8.--11. 1. "WRREC,Write Recovery" newline hexmask.long.byte 0x8 4.--7. 1. "ACTTOACT,Activate-To-Activate Interval" newline hexmask.long.byte 0x8 0.--3. 1. "WRTORD,Write-To-Read Interval" line.long 0xC "TIMING_CFG_2,DDR SDRAM Timing Configuration 2" hexmask.long.byte 0xC 28.--31. 1. "DERATE_VAL,Derate Value" newline hexmask.long.byte 0xC 19.--22. 1. "WR_LAT,Write Latency" newline bitfld.long 0xC 18. "EXT_WR_LAT,Extended Write Latency" "0,1" newline hexmask.long.byte 0xC 13.--17. 1. "RD_TO_PRE,Read-To-Precharge Time" newline bitfld.long 0xC 6.--8. "CKE_PLS,MCKE Pulse" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 0.--5. 1. "FOUR_ACT,Four Activate" line.long 0x10 "DDR_SDRAM_CFG,DDR SDRAM Control Configuration" bitfld.long 0x10 31. "MEM_EN,DDRC Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 30. "SREN,Self-Refresh Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 24.--26. "SDRAM_TYPE,DDR SDRAM Type" "?,1: LPDDR5 SDRAM,?,?,4: LPDDR4X SDRAM,?,?,?" newline bitfld.long 0x10 21. "DYN_PWR,Dynamic Power Management" "0: No,1: Yes" newline bitfld.long 0x10 19.--20. "DBW,DDR SDRAM Data Bus Width" "?,1: 32 bits,2: 16 bits,?" newline bitfld.long 0x10 16. "DC_EN,Dual Channel Enable" "0: Dual independent 16-bit channels are not used,1: Dual independent 16-bit channels are used" newline hexmask.long.byte 0x10 8.--14. 1. "BA_INTLV_CTL,Rank Interleaving Control" newline bitfld.long 0x10 1. "MEM_HALT,DDRC Halt" "0: Accepts new transactions,1: Completes any remaining transactions and remains.." newline bitfld.long 0x10 0. "BI,Bypass Initialization" "?,1: Initialization routine is bypassed" line.long 0x14 "DDR_SDRAM_CFG_2,DDR SDRAM Control Configuration 2" bitfld.long 0x14 31. "FRC_SR,Force Self-Refresh" "0: Normal mode,1: Self-Refresh mode" newline hexmask.long.byte 0x14 24.--27. 1. "MCK_DIS,MCK Disable" newline bitfld.long 0x14 21.--22. "ODT_CFG,ODT Configuration" "0: Never assert ODT to internal IOs,?,2: Assert ODT to internal IOs only during reads to..,?" newline hexmask.long.byte 0x14 12.--15. 1. "NUM_PR,Number Of Posted Refreshes" newline bitfld.long 0x14 11. "DDR_SLOW,DDR Slow Frequency" "0: DDRC runs at data rates of 1250 MT/s or higher.,1: DDRC runs at data rates of less than 1250 MT/s." newline bitfld.long 0x14 10. "X4_EN,x4 DDR SDRAM enable." "0: x8 or x16 memories are used such that 1..,1: x4 memories are used such that 1 DQS/DQS_B pair.." newline bitfld.long 0x14 4. "D_INIT,DDR SDRAM Data Initialization" "0: No data initialization in progress and none..,1: DDRC to initialize the DDR SDRAM after DDRC is.." group.long 0x120++0xB line.long 0x0 "DDR_SDRAM_MD_CNTL,DDR SDRAM Mode Control" bitfld.long 0x0 31. "MD_EN,Mode Enable" "0: Does not need to be issued,1: Valid data contained in the register ready to be.." newline bitfld.long 0x0 28.--30. "CS_SEL,Select Rank" "0: 0,1: 1,?,?,4: 0 and 1,?,?,?" newline hexmask.long.byte 0x0 24.--27. 1. "MD_SEL,Mode Register Select" newline bitfld.long 0x0 23. "SET_REF,Set Refresh" "0: No,1: Yes" newline bitfld.long 0x0 22. "SET_PRE,Set Precharge" "0: No,1: Yes" newline bitfld.long 0x0 20.--21. "CKE_CNTL,Clock Enable Control" "0: Not forced,1: Forced to a lower value,2: Forced to a higher value,?" newline hexmask.long.tbyte 0x0 0.--17. 1. "MD_VALUE,Mode Register Value" line.long 0x4 "DDR_SDRAM_INTERVAL,DDR SDRAM Interval Configuration" hexmask.long.word 0x4 16.--31. 1. "REFINT,Refresh Interval" newline hexmask.long.word 0x4 0.--13. 1. "BSTOPRE,Precharge Interval" line.long 0x8 "DDR_DATA_INIT,DDR SDRAM Data Initialization" hexmask.long 0x8 0.--31. 1. "INIT_VALUE,Initialization Value" group.long 0x130++0x3 line.long 0x0 "DDR_SDRAM_CLK_CNTL,DDR SDRAM Clock Control" hexmask.long.byte 0x0 22.--26. 1. "CLK_ADJUST,Clock Adjust" group.long 0x148++0x7 line.long 0x0 "DDR_INIT_ADDR,DDR Training Initialization Address" hexmask.long 0x0 0.--31. 1. "INIT_ADDR,Initialization Address" line.long 0x4 "DDR_INIT_EXT_ADDRESS,DDR Training Initialization Extended Address" bitfld.long 0x4 31. "UIA,Use Initialization Address" "0: Use the default address for training sequence as..,1: Use the initialization address programmed in.." newline hexmask.long.byte 0x4 0.--7. 1. "INIT_EXT_ADDR,Initialization Extended Address" group.long 0x160++0x3 line.long 0x0 "TIMING_CFG_4,DDR SDRAM Timing Configuration 4" hexmask.long.byte 0x0 28.--31. 1. "RWT,Read-To-Write Turnaround For Same Rank" newline hexmask.long.byte 0x0 24.--27. 1. "WRT,Write-To-Read Turnaround For Same Rank" newline hexmask.long.byte 0x0 20.--23. 1. "RRT,Read-To-Read Turnaround For Same Rank" newline hexmask.long.byte 0x0 16.--19. 1. "WWT,Write-To-Write Turnaround For Same Rank" newline bitfld.long 0x0 14.--15. "EXT_RWT,Extended Read-To-Write Turnaround" "0,1,2,3" newline bitfld.long 0x0 12.--13. "EXT_WRT,Extended Write-To-Read Turnaround" "0,1,2,3" newline bitfld.long 0x0 10.--11. "EXT_RRT,Extended Read-To-Read Turnaround" "0,1,2,3" newline bitfld.long 0x0 8.--9. "EXT_WWT,Extended Write-To-Write Turnaround" "0,1,2,3" newline bitfld.long 0x0 4. "EXT_REFINT,Extended Refresh Interval" "0: 0,1: 65 536" newline bitfld.long 0x0 0.--1. "DLL_LOCK,DDR SDRAM DLL Lock Time" "?,?,2: 1024 clocks,3: 2048 clocks" group.long 0x16C++0x7 line.long 0x0 "TIMING_CFG_7,DDR SDRAM Timing Configuration 7" bitfld.long 0x0 28.--29. "CKE_RST,MCKE Reset Time" "0: 200,1: 256,2: 512,3: 4096" newline hexmask.long.byte 0x0 24.--27. 1. "CKSRE,Clock After Self-Refresh Entry" newline hexmask.long.byte 0x0 20.--23. 1. "CKSRX,Clock After Self-Refresh Exit" line.long 0x4 "DDR_ZQ_CNTL,DDR SDRAM ZQ Calibration Control" bitfld.long 0x4 31. "ZQ_EN,ZQ Calibration Enable" "0: Used,1: Not used" newline hexmask.long.byte 0x4 24.--27. 1. "ZQINIT,ZQ Calibration Initialization Time" newline hexmask.long.byte 0x4 16.--19. 1. "ZQOPER,ZQ Calibration Operation Time" newline hexmask.long.byte 0x4 8.--11. 1. "ZQCS,ZQ Calibration Short Time" newline hexmask.long.byte 0x4 0.--3. 1. "ZQCS_INT,ZQCS Interval" group.long 0x17C++0x3 line.long 0x0 "DDR_SR_CNTR,DDR SDRAM Self-Refresh Counter" hexmask.long.byte 0x0 16.--19. 1. "SR_IT,Self-Refresh Idle Threshold" group.long 0x250++0x7 line.long 0x0 "TIMING_CFG_8,DDR SDRAM Timing Configuration 8" hexmask.long.byte 0x0 0.--5. 1. "PRE_ALL_REC,Precharge All-To-Activate Interval" line.long 0x4 "TIMING_CFG_9,DDR SDRAM timing configuration 9" hexmask.long.word 0x4 16.--25. 1. "REFREC_PB,Refresh Recovery Per-Bank Refresh" newline hexmask.long.word 0x4 0.--9. 1. "REFTOREF_PB,Refresh-to-refresh interval for per-bank refresh." group.long 0x260++0x3 line.long 0x0 "DDR_SDRAM_CFG_3,DDR SDRAM Control Configuration 3" bitfld.long 0x0 31. "DDRC_RST,DDRC Reset" "0: Operating normally,1: Undergoing reset" newline bitfld.long 0x0 18. "RH_AVD_EN,Row Hammering Avoidance Enable" "0: Row hammering avoidance not enabled,1: Row hammering avoidance enabled" newline bitfld.long 0x0 17. "CHB_SWP_EN,Channel B Swap Enable" "0: Channel B is not byte swapped,1: Channel B is byte swapped" newline bitfld.long 0x0 16. "CHA_SWP_EN,Channel A Swap Enable" "0: Channel A is not byte swapped,1: Channel A is byte swapped" newline bitfld.long 0x0 12.--14. "DM_CFG,Data Mask Configuration" "0: Normal data masks based on the settings defined..,?,2: DBI,3: Neither data masks nor DBI,4: DBI with data masks,?,?,?" newline bitfld.long 0x0 11. "DRAIN_FOR_SR,Drain Queues For Self-Refresh" "0: Do not drain,1: Drain" newline bitfld.long 0x0 7. "DYN_REF_RATE_EN,Dynamic Refresh Rate Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 3. "NON_PWR_2,Non Power of 2 Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 1. "SR_FAST_WK_EN,Self Refresh Fast Wakeup Enable" "0: Slow,1: Fast" group.long 0x30C++0xB line.long 0x0 "TIMING_CFG_15,DDR SDRAM Timing Configuration 15" hexmask.long.word 0x0 16.--25. 1. "REFREC_PB_HS,Refresh Recovery During Per-Bank Refresh." newline hexmask.long.word 0x0 0.--9. 1. "REFTOREF_PB_HS,Refresh-to-refresh interval for per-bank refresh." line.long 0x4 "TIMING_CFG_16,DDR SDRAM Timing Configuration 16" hexmask.long.word 0x4 0.--14. 1. "T_STAB_HS,Stabilization Wait Time at Half Speed" line.long 0x8 "TIMING_CFG_17,DDR SDRAM Timing Configuration 17" hexmask.long.byte 0x8 24.--27. 1. "ZQINIT_HS,ZQ Calibration Initialization Time" newline hexmask.long.byte 0x8 16.--19. 1. "ZQOPER_HS,ZQ Calibration Operation Time" newline hexmask.long.byte 0x8 8.--11. 1. "ZQCS_HS,ZQ Calibration Short Time" newline hexmask.long.byte 0x8 0.--3. 1. "ZQCS_INT_HS,ZQCS Interval" group.long 0x800++0x3 line.long 0x0 "TX_CFG_1,Transaction Configuration Register 1." hexmask.long.byte 0x0 7.--11. 1. "TS_DEPTH,Transaction Scheduler Depth" rgroup.long 0xB20++0x3 line.long 0x0 "DDRDSR_1,DDR Debug Status Register 1" bitfld.long 0x0 15. "CZ,Command Impedance." "0,1" newline bitfld.long 0x0 7. "DZ,Data Impedance." "0,1" group.long 0xB24++0xB line.long 0x0 "DDRDSR_2,DDR SDRAM Debug Status 2" rbitfld.long 0x0 31. "IDLE,Memory controller idle (read only)." "0: Memory controller is busy.,1: Memory controller is idle." newline rbitfld.long 0x0 30. "NML,No Modified Lines" "0: Exist,1: Do not exist" newline eventfld.long 0x0 1. "RPD_ST,Rapid Clear Of Memory Start" "0: Not started,1: Started" newline eventfld.long 0x0 0. "RPD_END,Rapid Clear Of Memory End" "0: Not complete,1: Complete" line.long 0x4 "DDRCDR_1,DDR Control Driver 1" bitfld.long 0x4 31. "DHC_EN,Driver Hardware Calibration Enable." "0,1" newline bitfld.long 0x4 18.--19. "ODT,On-Die-Termination." "0,1,2,3" newline bitfld.long 0x4 17. "DSO_C_EN,Override Enable for Command Impedance." "0,1" newline bitfld.long 0x4 16. "DSO_D_EN,Override Enable for Data Impedance." "0,1" newline bitfld.long 0x4 15. "DSO_CZ,Override for Command Impedance." "0,1" newline bitfld.long 0x4 7. "DSO_DZ,Override For Data Impedance." "0,1" line.long 0x8 "DDRCDR_2,DDR Control Driver Register 2" bitfld.long 0x8 31. "DSO_CLK_EN,Override Enable for Clock Impedance." "0,1" newline bitfld.long 0x8 27. "DSO_CLKZ,Override Value for Clock Impedance." "0,1" newline bitfld.long 0x8 0. "ODT,On-Die Termination" "0,1" rgroup.long 0xBF8++0x3 line.long 0x0 "DDR_IP_REV1,DDRC Revision 1" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP Block ID" newline hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major Revision" newline hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor Revision" group.long 0xD00++0x3 line.long 0x0 "DDR_MTCR,DDR SDRAM Memory Test Control" bitfld.long 0x0 31. "MT_EN,Memory Test Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 24.--25. "MT_TYP,Memory Test Type" "0: Both writes and reads,1: Only writes,2: Only reads,?" newline hexmask.long.byte 0x0 16.--19. 1. "MT_TRNARND,Memory Test Turnaround" newline bitfld.long 0x0 9. "MT_ADDR_EN,Memory Test Address Range Enable" "0: Memory range that the CSn_BNDS registers define,1: Memory range that the DDR_MT_ST_EXT_ADDR.." newline bitfld.long 0x0 0. "MT_STAT,Memory Test Status" "0: No fail detected,1: Data miscompare detected" repeat 10. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD20)++0x3 line.long 0x0 "DDR_MTP[$1],DDR SDRAM Memory Test Pattern n" hexmask.long 0x0 0.--31. 1. "DDR_PATT,DDR SDRAM Pattern" repeat.end group.long 0xD60++0xF line.long 0x0 "DDR_MT_ST_EXT_ADDR,DDR SDRAM Memory Test Start Extended Address" hexmask.long.byte 0x0 0.--7. 1. "MT_ST_EXT_ADDR,Memory Test Start Extended Address" line.long 0x4 "DDR_MT_ST_ADDR,DDR SDRAM Memory Test Start Address" hexmask.long 0x4 0.--31. 1. "MT_ST_ADDR,Memory Test Start Address" line.long 0x8 "DDR_MT_END_EXT_ADDR,DDR SDRAM Memory Test End Extended Address" hexmask.long.byte 0x8 0.--7. 1. "MT_END_EXT_ADDR,Memory Test End Extended Address" line.long 0xC "DDR_MT_END_ADDR,DDR SDRAM Memory Test End Address" hexmask.long 0xC 0.--31. 1. "MT_END_ADDR,Memory Test End Address" group.long 0xE00++0x3 line.long 0x0 "PMGC0,Performance Monitor Global Control" bitfld.long 0x0 31. "FAC,Freeze All Counters" "0: Incremented,1: Not incremented" newline bitfld.long 0x0 30. "PMIE,Performance Monitor Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 29. "FCECE,Freeze Counters On Enabled Condition Or Event" "0: Enabled if PMLCAn[CE] = 1 until an event or..,1: Enabled if PMLCAn[CE] = 1 until an event or.." group.long 0xE10++0x1B line.long 0x0 "PMLCA0,Performance Monitor Local Control A0" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions for PMC0n cannot..,1: Counter overflow conditions occur when the.." line.long 0x4 "PMLCB0,Performance Monitor Local Control B0" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" line.long 0x8 "PMC0a,PMC 0a" hexmask.long 0x8 0.--31. 1. "PMC0,Counter 0" line.long 0xC "PMC0b,PMC 0b" hexmask.long 0xC 0.--31. 1. "PMC0,Counter 0" line.long 0x10 "PMLCA1,Performance Monitor Local Control A" bitfld.long 0x10 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x10 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x10 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x10 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x10 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x10 0.--5. 1. "BDIST,Burst Distance" line.long 0x14 "PMLCB1,Performance Monitor Local Control B" hexmask.long.byte 0x14 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x14 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x14 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x14 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x14 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x14 0.--5. 1. "THRESHOLD,Threshold" line.long 0x18 "PMC1,Performance Monitor Counter" hexmask.long 0x18 0.--31. 1. "PMC1,Event Count" group.long 0xE30++0xB line.long 0x0 "PMLCA2,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB2,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC2,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC2,Event Count" group.long 0xE40++0xB line.long 0x0 "PMLCA3,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB3,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC3,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC3,Event Count" group.long 0xE50++0xB line.long 0x0 "PMLCA4,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB4,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC4,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC4,Event Count" group.long 0xE60++0xB line.long 0x0 "PMLCA5,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB5,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC5,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC5,Event Count" group.long 0xE70++0xB line.long 0x0 "PMLCA6,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB6,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC6,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC6,Event Count" group.long 0xE80++0xB line.long 0x0 "PMLCA7,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB7,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC7,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC7,Event Count" group.long 0xE90++0xB line.long 0x0 "PMLCA8,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB8,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC8,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC8,Event Count" group.long 0xEA0++0xB line.long 0x0 "PMLCA9,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB9,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC9,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC9,Event Count" group.long 0xEB0++0xB line.long 0x0 "PMLCA10,Performance Monitor Local Control A" bitfld.long 0x0 31. "FC,Freeze Counter" "0: Enabled,1: Disabled" newline bitfld.long 0x0 26. "CE,Condition Enable" "0: Counter overflow conditions cannot occur,1: Counter overflow conditions occur" newline hexmask.long.byte 0x0 16.--22. 1. "EVENT,Event Selector" newline hexmask.long.byte 0x0 11.--15. 1. "BSIZE,Burst Size" newline hexmask.long.byte 0x0 6.--10. 1. "BGRAN,Burst Granularity" newline hexmask.long.byte 0x0 0.--5. 1. "BDIST,Burst Distance" line.long 0x4 "PMLCB10,Performance Monitor Local Control B" hexmask.long.byte 0x4 26.--29. 1. "TRIGONSEL,Trigger-On Select" newline hexmask.long.byte 0x4 20.--23. 1. "TRIGOFFSEL,Trigger-Off Select" newline bitfld.long 0x4 18.--19. "TRIGONCNTL,Trigger-On Control" "0: Triggering off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 16.--17. "TRIGOFFCNTL,Trigger-Off Control" "0: Trigger off (no triggering to start),1: Trigger on change,2: Trigger on overflow,?" newline bitfld.long 0x4 8.--10. "TBMULT,Threshold And Burstiness Multiplier" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline hexmask.long.byte 0x4 0.--5. 1. "THRESHOLD,Threshold" line.long 0x8 "PMC10,Performance Monitor Counter" hexmask.long 0x8 0.--31. 1. "PMC10,Event Count" group.long 0x1000++0x3 line.long 0x0 "ERR_EN,Error Enable" bitfld.long 0x0 31. "ECC_EN,ECC Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 30. "INLINE_ECC_EN,Inline ECC Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 9. "CRC_1_EN,CRC Enable For Group 1 Registers" "0: Disables,1: Enables" newline bitfld.long 0x0 8. "CRC_2_EN,CRC Enable For Group 2 Registers" "0: Disables,1: Enables" newline bitfld.long 0x0 7. "ECC_EN_RAM_1,ECC Enable For On-Chip RAM 1" "0: Disables,1: Enables" newline bitfld.long 0x0 6. "ECC_EN_RAM_2,ECC Enable For On-Chip RAM 2" "0: Disables,1: Enables" newline bitfld.long 0x0 5. "PAR_1_EN,Parity Enable For Internal Errors" "0: Disables,1: Enables" newline bitfld.long 0x0 3. "LKSTP_1_EN,Lockstep 1 Enable" "0: Disables,1: Enables. You must run self-test prior to.." newline bitfld.long 0x0 2. "LKSTP_2_EN,Lockstep 2 Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 1. "RTE_EN,Read Tag Error Enable" "0: Disables,1: Enables" newline bitfld.long 0x0 0. "WTE_EN,Write Tag Error Enable" "0: Disables,1: Enables" group.long 0x1100++0xF line.long 0x0 "DATA_ERR_INJECT_HI,Memory Data Path Error Injection Mask High" hexmask.long 0x0 0.--31. 1. "EIMH,Error Injection Mask High Data Path" line.long 0x4 "DATA_ERR_INJECT_LO,Memory Data Path Error Injection Mask Low" hexmask.long 0x4 0.--31. 1. "EIML,Error Injection Mask Low Data Bit" line.long 0x8 "ERR_INJECT,Memory Data Path Error Injection Mask ECC" bitfld.long 0x8 31. "ADDR_TEN,Address Trigger Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 24.--25. "PAR_INJ_SRC,Parity Error Injection Source" "?,1: On-chip parity 1,2: On-chip parity 2,?" newline bitfld.long 0x8 23. "FRC2B,Force 2-Bit Error" "0: SBE,1: 2-bit error" newline bitfld.long 0x8 21.--22. "ECC_INJ_SRC,ECC Injection Source" "0: DDR SDRAM ECC using programmed data and ECC..,1: On-chip RAM ECC 1,2: On-chip RAM ECC 2,3: DDR SDRAM ECC. This setting forces a 1 or 2-bit.." newline bitfld.long 0x8 18.--20. "INTIES,Internal Error Injection Source" "0: Read tag,1: Write tag,2: Read tag timeout,3: Write tag timeout,4: Lockstep 1,5: Lockstep 2,6: Lockstep redundant 1,7: Lockstep redundant 2" newline bitfld.long 0x8 17. "INTEIN,Internal Error Injection Enable" "0: Disables,1: Enables" newline bitfld.long 0x8 16. "PIEN,Parity Error Injection Enable" "0: Disables,1: Enables" newline hexmask.long.byte 0x8 12.--15. 1. "NUM_ECC_INJ,Number Of ECC Errors Injected" newline bitfld.long 0x8 8. "EIEN,Error Injection Enable" "0: Disables,1: Enables" newline hexmask.long.byte 0x8 0.--7. 1. "EEIM,ECC Error Injection Mask" line.long 0xC "ADDR_ERR_INJ,Address Error Inject" hexmask.long 0xC 0.--31. 1. "ADDR,Address" group.long 0x1118++0x13 line.long 0x0 "CAPTURE_EXT_DATA_HI,Memory Extended Data Path Read Capture High" hexmask.long 0x0 0.--31. 1. "ECEHD,Error Capture Extended High Data Path" line.long 0x4 "CAPTURE_EXT_DATA_LO,Memory Extended Data Path Read Capture Low" hexmask.long 0x4 0.--31. 1. "ECELD,Error Capture Extended Low Data Path" line.long 0x8 "CAPTURE_DATA_HI,Memory Data Path Read Capture High" hexmask.long 0x8 0.--31. 1. "ECHD,Error Capture High Data Path" line.long 0xC "CAPTURE_DATA_LO,Memory Data Path Read Capture Low" hexmask.long 0xC 0.--31. 1. "ECLD,Error Capture Low Data Path" line.long 0x10 "CAPTURE_ECC,Memory Data Path Read Capture ECC" hexmask.long 0x10 0.--31. 1. "ECE,Error Capture ECC" group.long 0x1140++0x1B line.long 0x0 "ERR_DETECT,Memory Error Detect" eventfld.long 0x0 31. "MME,Multiple Memory Errors" "0: Not detected,1: Detected" newline eventfld.long 0x0 30. "RTMTE,Read Timeout Error" "0: Not detected,1: Detected" newline eventfld.long 0x0 29. "RTTE,Read Tag Timeout Error" "0: Disables,1: Enables" newline eventfld.long 0x0 28. "WTTE,Write Tag Timeout Error" "0: Disables,1: Enables" newline eventfld.long 0x0 27. "RTAGE,Read Tag Error" "0: Not detected,1: Detected" newline eventfld.long 0x0 26. "WTAGE,Write Tag Error" "0: Not detected,1: Detected" newline eventfld.long 0x0 25. "SSBE1,SRAM SBE 1" "0: Did not occur,1: Occurred" newline eventfld.long 0x0 24. "SSBE2,SRAM SBE 2" "0: Did not occur,1: Occurred" newline eventfld.long 0x0 23. "SMBE1,SRAM Multi-Bit Error 1" "0: Did not occur,1: Occurred" newline eventfld.long 0x0 22. "SMBE2,SRAM Multi-Bit Error 2" "0: Did not occur,1: Occurred" newline eventfld.long 0x0 21. "CRCE,Configuration CRC Error" "0: Did not occur,1: Occurred" newline eventfld.long 0x0 20. "UPDTMTE,Update Timeout Error" "0: Not detected,1: Detected" newline eventfld.long 0x0 19. "IPE,Internal Parity Error" "0: Not detected,1: Detected" newline eventfld.long 0x0 9. "LKSTP1E,Lockstep 1 error." "0: A Lockstep 1 error has not been detected.,1: A Lockstep 1 error has been detected." newline eventfld.long 0x0 8. "LKSTP2E,Lockstep 2 error." "0: A Lockstep 2 error has not been detected.,1: A Lockstep 2 error has been detected." newline eventfld.long 0x0 7. "REFRATEE,Refresh rate error." "0: A refresh rate error has not been detected.,1: A refresh rate error has been detected." newline eventfld.long 0x0 3. "MBE,Multiple-Bit Error" "0: Not detected,1: Detected" newline eventfld.long 0x0 2. "SBE,Single-Bit ECC Errors" "0: Did not cross,1: Crossed" newline eventfld.long 0x0 0. "MSE,Memory-Select Error" "0: Not detected,1: Detected" line.long 0x4 "ERR_DISABLE,Memory Error Disable" bitfld.long 0x4 20. "UPDTMTED,Update Timeout Error Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 7. "REFRATEED,Refresh Rate Error Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 3. "MBED,Multiple-Bit ECC Error Disable" "0: Detected,1: Not detected or reported" newline bitfld.long 0x4 2. "SBED,Single-Bit ECC Error Disable" "0: Enables,1: Disables" newline bitfld.long 0x4 0. "MSED,Memory-Select Error Disable" "0: Enables,1: Disables" line.long 0x8 "ERR_INT_EN,Memory Error Interrupt Enable" bitfld.long 0x8 20. "UPDTMTEE,Update Timeout Interrupt Enable" "0: No,1: Yes" newline bitfld.long 0x8 7. "REFRATEEE,Refresh Rate Interrupt Enable" "0: No,1: Yes" newline bitfld.long 0x8 4. "SSBE12E,SRAM Single-Bit Error Interrupt Enable" "0: No,1: Yes" newline bitfld.long 0x8 3. "MBEE,Multiple-Bit ECC Error Interrupt Enable" "0: No,1: Yes" newline bitfld.long 0x8 2. "SBEE,Single-Bit ECC Error Interrupt Enable" "0: No,1: Yes" newline bitfld.long 0x8 0. "MSEE,Memory-Select Error Interrupt Enable" "0: No,1: Yes" line.long 0xC "CAPTURE_ATTRIBUTES,Memory Error Attributes Capture" bitfld.long 0xC 28.--30. "BNUM,Data Beat Number" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 12.--13. "TTYP,Error Transaction Type" "?,1: Write,2: Read,3: Read-modify-write" newline bitfld.long 0xC 0. "VLD,Valid" "0,1" line.long 0x10 "CAPTURE_ADDRESS,Memory Error Address Capture" hexmask.long 0x10 0.--31. 1. "CADDR,Captured Address" line.long 0x14 "CAPTURE_EXT_ADDRESS,Memory Error Extended Address Capture" hexmask.long.byte 0x14 0.--7. 1. "CEADDR,Captured Extended Address" line.long 0x18 "ERR_SBE,Single-Bit ECC Memory Error Management" hexmask.long.byte 0x18 16.--23. 1. "SBET,SBE Threshold" newline hexmask.long.byte 0x18 0.--7. 1. "SBEC,SBE Counter" group.long 0x1200++0x3 line.long 0x0 "REG_LKSTP_CNTL,Lockstep Register Control" bitfld.long 0x0 1. "CLR_LKSTP1,Clear Lockstep 1 Error" "0: Does not clear Lockstep 1 error,1: Clears Lockstep 1 error" newline bitfld.long 0x0 0. "CLR_LKSTP2,Clear Lockstep 2 Error" "0: Does not clear Lockstep 2 error,1: Clears Lockstep 2 error" group.long 0x1210++0x7 line.long 0x0 "REG_CRC_GRP_1,Register CRC Code For Group 1" hexmask.long 0x0 0.--31. 1. "CRC_1,Programmed CRC Code" line.long 0x4 "REG_CRC_GRP_2,Register CRC Code For Group 2" hexmask.long 0x4 0.--31. 1. "CRC_2,Programmed CRC Code" group.long 0x1240++0x1F line.long 0x0 "ECC_REG_0,ECC Region 0 Configuration" bitfld.long 0x0 31. "REG_0_EN,Region 0 Enable" "0: Does not use region 0 for ECC enablement,1: Protects addresses from region 0 with ECC" newline hexmask.long.word 0x0 16.--27. 1. "REG_0_SA,Region 0 Start Address" newline hexmask.long.word 0x0 0.--11. 1. "REG_0_EA,Region 0 End Address" line.long 0x4 "ECC_REG_1,ECC Region 1 Configuration" bitfld.long 0x4 31. "REG_1_EN,Region 1 Enable" "0: Does not use region 1 for ECC enablement,1: Protects addresses from region 1 with ECC" newline hexmask.long.word 0x4 16.--27. 1. "REG_1_SA,Region 1 Start Address" newline hexmask.long.word 0x4 0.--11. 1. "REG_1_EA,Region 1 End Address" line.long 0x8 "ECC_REG_2,ECC Region 2 Configuration" bitfld.long 0x8 31. "REG_2_EN,Region 2 Enable" "0: Does not use region 2 for ECC enablement,1: Protects addresses from region 2 with ECC" newline hexmask.long.word 0x8 16.--27. 1. "REG_2_SA,Region 2 Start Address" newline hexmask.long.word 0x8 0.--11. 1. "REG_2_EA,Region 2 End Address" line.long 0xC "ECC_REG_3,ECC Region 3 Configuration" bitfld.long 0xC 31. "REG_3_EN,Region 3 Enable" "0: Does not use region 3 for ECC enablement,1: Protects addresses from region 3 with ECC" newline hexmask.long.word 0xC 16.--27. 1. "REG_3_SA,Region 3 Start Address" newline hexmask.long.word 0xC 0.--11. 1. "REG_3_EA,Region 3 End Address" line.long 0x10 "ECC_REG_4,ECC Region 4 Configuration" bitfld.long 0x10 31. "REG_4_EN,Region 4 Enable" "0: Does not use region 4 for ECC enablement,1: Protects addresses from region 4 with ECC" newline hexmask.long.word 0x10 16.--27. 1. "REG_4_SA,Region 4 Start Address" newline hexmask.long.word 0x10 0.--11. 1. "REG_4_EA,Region 4 End Address" line.long 0x14 "ECC_REG_5,ECC Region 5 Configuration" bitfld.long 0x14 31. "REG_5_EN,Region 5 Enable" "0: Does not use region 5 for ECC enablement,1: Protects addresses from region 5 with ECC" newline hexmask.long.word 0x14 16.--27. 1. "REG_5_SA,Region 5 Start Address" newline hexmask.long.word 0x14 0.--11. 1. "REG_5_EA,Region 5 End Address" line.long 0x18 "ECC_REG_6,ECC Region 6 Configuration" bitfld.long 0x18 31. "REG_6_EN,Region 6 Enable" "0: Does not use region 6 for ECC enablement,1: Protects addresses from region 6 with ECC" newline hexmask.long.word 0x18 16.--27. 1. "REG_6_SA,Region 6 Start Address" newline hexmask.long.word 0x18 0.--11. 1. "REG_6_EA,Region 6 End Address" line.long 0x1C "ECC_REG_7,ECC Region 7 Configuration" bitfld.long 0x1C 31. "REG_7_EN,Region 7 Enable" "0: Does not use region 7 for ECC enablement,1: Protects addresses from region 7 with ECC" newline hexmask.long.word 0x1C 16.--27. 1. "REG_7_SA,Region 7 Start Address" newline hexmask.long.word 0x1C 0.--11. 1. "REG_7_EA,Region 7 End Address" tree.end tree "DDR_FRACT_PLL" base ad:0x44481300 group.long 0x0++0x6F line.long 0x0 "CTRL,PLL Control Register" bitfld.long 0x0 31. "LOCK_BYPASS,Lock Bypass" "0: Lock bypassing disabled.,1: Lock bypassing enabled." newline bitfld.long 0x0 16. "HW_CTRL_SEL,Hardware control select" "0: Hardware Control Select Disable.,1: Hardware Control Select Enable." newline bitfld.long 0x0 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0: Normal mode,1: MULTIPHASE_SDM_DISABLE_MODE" newline bitfld.long 0x0 11. "DITHER_EN3,Dither Enable 3" "0: Normal mode,1: Dither enable for third stage of fractional.." newline bitfld.long 0x0 10. "DITHER_EN2,Dither Enable 2" "0: Normal mode,1: Dither enable for second stage of fractional.." newline bitfld.long 0x0 9. "DITHER_EN1,Dither Enable 1" "0: Normal mode,1: Dither enable for first stage of fractional.." newline bitfld.long 0x0 8. "SPREADCTL,Modulation type selection" "0: Modulation centered around nominal frequency.,1: Modulation spread below nominal frequency." newline bitfld.long 0x0 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0: Normal mode,1: PLL Bypass mode" newline bitfld.long 0x0 1. "CLKMUX_EN,CLKMUX ENABLE" "0: Disable the output clock,1: Enable the output clock" newline bitfld.long 0x0 0. "POWERUP,POWERUP" "0: PLL is Disabled,1: PLL is Enabled" line.long 0x4 "CTRL_SET,PLL Control Register" bitfld.long 0x4 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0x4 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0x4 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0x4 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0x4 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0x4 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0x4 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0x4 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0x4 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0x4 0. "POWERUP,POWERUP" "0,1" line.long 0x8 "CTRL_CLR,PLL Control Register" eventfld.long 0x8 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline eventfld.long 0x8 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline eventfld.long 0x8 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline eventfld.long 0x8 11. "DITHER_EN3,Dither Enable 3" "0,1" newline eventfld.long 0x8 10. "DITHER_EN2,Dither Enable 2" "0,1" newline eventfld.long 0x8 9. "DITHER_EN1,Dither Enable 1" "0,1" newline eventfld.long 0x8 8. "SPREADCTL,Modulation type selection" "0,1" newline eventfld.long 0x8 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline eventfld.long 0x8 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline eventfld.long 0x8 0. "POWERUP,POWERUP" "0,1" line.long 0xC "CTRL_TOG,PLL Control Register" bitfld.long 0xC 31. "LOCK_BYPASS,Lock Bypass" "0,1" newline bitfld.long 0xC 16. "HW_CTRL_SEL,Hardware control select" "0,1" newline bitfld.long 0xC 12. "MULTIPHASE_SDM_DISABLE,MULTIPHASE_SDM_DISABLE" "0,1" newline bitfld.long 0xC 11. "DITHER_EN3,Dither Enable 3" "0,1" newline bitfld.long 0xC 10. "DITHER_EN2,Dither Enable 2" "0,1" newline bitfld.long 0xC 9. "DITHER_EN1,Dither Enable 1" "0,1" newline bitfld.long 0xC 8. "SPREADCTL,Modulation type selection" "0,1" newline bitfld.long 0xC 2. "CLKMUX_BYPASS,CLKMUX_BYPASS" "0,1" newline bitfld.long 0xC 1. "CLKMUX_EN,CLKMUX ENABLE" "0,1" newline bitfld.long 0xC 0. "POWERUP,POWERUP" "0,1" line.long 0x10 "ANA_PRG,PLL Analog Program Register" hexmask.long.byte 0x10 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x10 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0: 128 reference clock cycles,1: 192 reference clock cycles,2: 256 reference clock cycles,3: 384 reference clock cycles,4: 512 reference clock cycles,5: 768 reference clock cycles,6: 1023 reference clock cycles,7: 64 reference clock cycles" newline bitfld.long 0x10 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0: Enable the lock/unlock accuracy relax feature..,1: Disable the lock/unlock accuracy relax feature.." newline bitfld.long 0x10 18.--19. "WIN_PER,WIN_PER" "0: 200 VCO cycles,1: 300 VCO cycles,2: 400 VCO cycles,3: 100 VCO cycles" newline bitfld.long 0x10 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x10 14.--15. "V2I_CTRL,V2I_CTRL" "0: I,1: 0.75 I,2: 1.5 I,3: 1.25 I" newline bitfld.long 0x10 12.--13. "ICP_CTRL,ICP_CTRL" "0: I,1: 0.5 I,2: 2 I,3: 1.5 I" newline bitfld.long 0x10 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x10 6.--7. "LOCK_WAIT,LOCK_WAIT" "0: 8 cycles,1: 4 cycles,2: 16 cycles,3: 31 cycles" newline bitfld.long 0x10 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0: +/-4.5%,1: +/-8.5%,2: +/-16.5%,3: +/-2.5%" newline bitfld.long 0x10 2.--3. "LOCKCTRL,LOCKCTRL" "0: +/-1.5%,1: +/-2.5%,2: +/-4.5%,3: +/-8.5%" newline bitfld.long 0x10 1. "DOUBLE_LF,DOUBLE_LF" "0: Normal mode,1: Increase the frequency of loop filter by 2x" newline bitfld.long 0x10 0. "HALF_LF,HALF_LF" "0: Normal mode,1: Reduces the frequency of loop filter by 2x" line.long 0x14 "ANA_PRG_SET,PLL Analog Program Register" hexmask.long.byte 0x14 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x14 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x14 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x14 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x14 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x14 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x14 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x14 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x14 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x14 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x14 0. "HALF_LF,HALF_LF" "0,1" line.long 0x18 "ANA_PRG_CLR,PLL Analog Program Register" hexmask.long.byte 0x18 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline eventfld.long 0x18 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline eventfld.long 0x18 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline eventfld.long 0x18 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline eventfld.long 0x18 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline eventfld.long 0x18 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline eventfld.long 0x18 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline eventfld.long 0x18 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline eventfld.long 0x18 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline eventfld.long 0x18 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline eventfld.long 0x18 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline eventfld.long 0x18 0. "HALF_LF,HALF_LF" "0,1" line.long 0x1C "ANA_PRG_TOG,PLL Analog Program Register" hexmask.long.byte 0x1C 24.--31. 1. "ANA_MISC,Analog miscellaneous bits" newline bitfld.long 0x1C 21.--23. "LOCK_BYP_DELAY,LOCK_BYP_DELAY" "0,1,2,3,4,5,6,7" newline bitfld.long 0x1C 20. "SSC_LOCK_RELAX_DISABLE,SSC_LOCK_RELAX_DISABLE" "0,1" newline bitfld.long 0x1C 18.--19. "WIN_PER,WIN_PER" "0,1,2,3" newline bitfld.long 0x1C 16.--17. "IREF_CTRL,IREF_CTRL" "0,1,2,3" newline bitfld.long 0x1C 14.--15. "V2I_CTRL,V2I_CTRL" "0,1,2,3" newline bitfld.long 0x1C 12.--13. "ICP_CTRL,ICP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 10.--11. "V2I_CP_CTRL,V2I_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 8.--9. "IPTAT_CP_CTRL,IPTAT_CP_CTRL" "0,1,2,3" newline bitfld.long 0x1C 6.--7. "LOCK_WAIT,LOCK_WAIT" "0,1,2,3" newline bitfld.long 0x1C 4.--5. "UNLOCKCTRL,UNLOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 2.--3. "LOCKCTRL,LOCKCTRL" "0,1,2,3" newline bitfld.long 0x1C 1. "DOUBLE_LF,DOUBLE_LF" "0,1" newline bitfld.long 0x1C 0. "HALF_LF,HALF_LF" "0,1" line.long 0x20 "TEST,PLL TEST Register" bitfld.long 0x20 10. "STRESS_MODE,STRESS_MODE" "0: Normal mode,1: PLL is in EVS mode." newline bitfld.long 0x20 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x20 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0: Normal mode,1: PLL is in DVS mode." newline bitfld.long 0x20 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0: Disable TEST MUX. atpsense pin remains tristated.,1: Enable TEST MUX. ANAMUX_CTRL values are.." newline bitfld.long 0x20 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0: Bring out PLL 0.8V supply voltage through the..,1: Bring out V2I test current through the atpsense..,2: Bring out Charge Pump UP Current through the..,3: Bring out Charge Pump DN Current through the..,4: Bring out IREF test current through atpsense pin.,5: Bring out PLL control voltage through atpsense..,6: Bring out PLL Vring voltage through the atpsense..,7: Bring out PLL 0.8V supply voltage through the.." line.long 0x24 "TEST_SET,PLL TEST Register" bitfld.long 0x24 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x24 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x24 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x24 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x24 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x28 "TEST_CLR,PLL TEST Register" eventfld.long 0x28 10. "STRESS_MODE,STRESS_MODE" "0,1" newline eventfld.long 0x28 9. "MODE,1:1 MODE" "0,1" newline eventfld.long 0x28 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline eventfld.long 0x28 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline eventfld.long 0x28 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x2C "TEST_TOG,PLL TEST Register" bitfld.long 0x2C 10. "STRESS_MODE,STRESS_MODE" "0,1" newline bitfld.long 0x2C 9. "MODE,1:1 MODE" "0,1" newline bitfld.long 0x2C 8. "OPEN_LOOP_MODE,OPEN_LOOP_MODE" "0,1" newline bitfld.long 0x2C 3. "TEST_MUX_ENABLE,TEST_MUX_ENABLE" "0,1" newline bitfld.long 0x2C 0.--2. "ANAMUX_CTRL,Analog test signal selection. Valid when TEST_MUX_ENABLE is 1'b1" "0,1,2,3,4,5,6,7" line.long 0x30 "SPREAD_SPECTRUM,PLL Spread Spectrum Register" hexmask.long.word 0x30 16.--31. 1. "STOP,Stop" newline bitfld.long 0x30 15. "ENABLE,ENABLE" "0: Disable spread spectrum modulation.,1: Enable spread spectrum modulation." newline hexmask.long.word 0x30 0.--14. 1. "STEP,STEP" line.long 0x34 "SPREAD_SPECTRUM_SET,PLL Spread Spectrum Register" hexmask.long.word 0x34 16.--31. 1. "STOP,Stop" newline bitfld.long 0x34 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "STEP,STEP" line.long 0x38 "SPREAD_SPECTRUM_CLR,PLL Spread Spectrum Register" hexmask.long.word 0x38 16.--31. 1. "STOP,Stop" newline eventfld.long 0x38 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x38 0.--14. 1. "STEP,STEP" line.long 0x3C "SPREAD_SPECTRUM_TOG,PLL Spread Spectrum Register" hexmask.long.word 0x3C 16.--31. 1. "STOP,Stop" newline bitfld.long 0x3C 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x3C 0.--14. 1. "STEP,STEP" line.long 0x40 "NUMERATOR,PLL Numerator Register" hexmask.long 0x40 2.--31. 1. "MFN,Numerator" line.long 0x44 "NUMERATOR_SET,PLL Numerator Register" hexmask.long 0x44 2.--31. 1. "MFN,Numerator" line.long 0x48 "NUMERATOR_CLR,PLL Numerator Register" hexmask.long 0x48 2.--31. 1. "MFN,Numerator" line.long 0x4C "NUMERATOR_TOG,PLL Numerator Register" hexmask.long 0x4C 2.--31. 1. "MFN,Numerator" line.long 0x50 "DENOMINATOR,PLL Denominator Register" hexmask.long 0x50 0.--29. 1. "MFD,Denominator" line.long 0x54 "DENOMINATOR_SET,PLL Denominator Register" hexmask.long 0x54 0.--29. 1. "MFD,Denominator" line.long 0x58 "DENOMINATOR_CLR,PLL Denominator Register" hexmask.long 0x58 0.--29. 1. "MFD,Denominator" line.long 0x5C "DENOMINATOR_TOG,PLL Denominator Register" hexmask.long 0x5C 0.--29. 1. "MFD,Denominator" line.long 0x60 "DIV,PLL Dividers Register" hexmask.long.word 0x60 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x60 13.--15. "RDIV,Input clock predivider" "0: Divide by 1,1: Divide by 1,2: Divide by 2,3: Divide by 3,4: Divide by 4,5: Divide by 5,6: Divide by 6,7: Divide by 7" newline hexmask.long.byte 0x60 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x64 "DIV_SET,PLL Dividers Register" hexmask.long.word 0x64 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x64 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x64 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x68 "DIV_CLR,PLL Dividers Register" hexmask.long.word 0x68 16.--24. 1. "MFI,Integer portion of loop divider" newline eventfld.long 0x68 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x68 0.--7. 1. "ODIV,Output frequency divider for clock output" line.long 0x6C "DIV_TOG,PLL Dividers Register" hexmask.long.word 0x6C 16.--24. 1. "MFI,Integer portion of loop divider" newline bitfld.long 0x6C 13.--15. "RDIV,Input clock predivider" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x6C 0.--7. 1. "ODIV,Output frequency divider for clock output" rgroup.long 0xF0++0x3 line.long 0x0 "PLL_STATUS,PLL Status Register" hexmask.long 0x0 2.--31. 1. "ANA_MFN,ANA_MFN" newline bitfld.long 0x0 1. "PLL_LOL,PLL_LOL" "0,1" newline bitfld.long 0x0 0. "PLL_LOCK,PLL_LOCK" "0,1" tree.end tree "DDR_LSTCU" base ad:0x4E050000 group.long 0x8++0x3 line.long 0x0 "ERR_STAT,Error Status" bitfld.long 0x0 17. "RFSF,Recoverable Fault Status" "0: No recoverable fault,1: Recoverable fault has occurred" bitfld.long 0x0 16. "UFSF,Unrecoverable Fault Status" "0: No unrecoverable fault,1: Unrecoverable fault has occurred" newline rbitfld.long 0x0 2. "INVP_LB,Invalid pointer LBIST" "0: Invalid scheduling of LSTCU by CSTCU occurs when..,1: Invalid scheduling of LSTCU by CSTCU for BIST.." rbitfld.long 0x0 1. "INVP_MB,Invalid Pointer MBIST" "0: No invalid pointer to BIST controller.,1: Invalid BIST pointer specified during BIST.." newline rbitfld.long 0x0 0. "INVP_FB,Invalid Pointer FBIST" "0: Invalid scheduling of LSTCU by CSTCU occurs when..,1: Invalid scheduling of LSTCU by CSTCU for BIST.." group.long 0x10++0x3 line.long 0x0 "ERR_FM,Error Fault Mapping" bitfld.long 0x0 2. "INVPFMLB,Invalid BIST Pointer Fault Mapping during LBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" bitfld.long 0x0 1. "INVPFMMB,Invalid BIST Pointer Fault Mapping during MBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" newline bitfld.long 0x0 0. "INVPFMFB,Invalid BIST Pointer Fault Mapping during functional mode BIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" rgroup.long 0x60++0x3 line.long 0x0 "MB_RSTAT0,MBIST Run Status 0" bitfld.long 0x0 0. "MBSTAT0,MBIST Run Result Status Bit 0" "0: Pass,1: Fail" group.long 0x180++0x3 line.long 0x0 "MBFM0,MBIST Fault Mapping 0" bitfld.long 0x0 0. "MBSTATFM0,MBIST_RUN_STAT0[MBSTAT0] Fault Mapping" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" group.long 0x260++0x3 line.long 0x0 "STAG,Stagger" hexmask.long.byte 0x0 8.--15. 1. "MB_DELAY,MBIST Delay" group.long 0x270++0xB line.long 0x0 "PH1_DUR,Phase 1 Duration" hexmask.long.word 0x0 0.--9. 1. "PH1DUR,Phase 1 Duration" line.long 0x4 "ISODUR,Isolation Duration" hexmask.long.word 0x4 16.--25. 1. "DIS_DUR,Disable Duration" hexmask.long.word 0x4 0.--9. 1. "EN_DUR,Enable Duration" line.long 0x8 "SRCENDUR,Synchronous Reset Clock Enable Duration" hexmask.long.word 0x8 0.--9. 1. "CLKENDUR,Synchronous Reset Clock Enable Duration (in LSTCU clock cycles)" group.long 0x300++0x3 line.long 0x0 "MBPTR0,MBIST Scheduler Pointer" bitfld.long 0x0 31. "MBEOL,MBIST End of List" "0: Not end of list,1: End of list" bitfld.long 0x0 8. "MBCSM,MBIST Concurrent or Sequential Mode" "0: Sequential mode,1: Concurrent mode" newline hexmask.long.byte 0x0 0.--7. 1. "MBPTR,MBIST Pointer" tree.end tree "DDR_TCU" base ad:0x4E000000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0x560++0x3 line.long 0x0 "tcu_dft_divider,clk divider bypass control" bitfld.long 0x0 0. "tcu_dft_divider_disable,dft divider disable" "0,1" group.long 0x580++0x3 line.long 0x0 "tcu_dft_phy,CRR control on TxBypassOE" bitfld.long 0x0 0. "tcu_crr_txbypassoe,dft fuse disable" "0,1" group.long 0xB80++0xF line.long 0x0 "tcu_ddr_bsr_control_,TCU DDR BSR control register" bitfld.long 0x0 2. "ddr_io_bypass_out_data,ddr_io_bypass_out_data" "0,1" bitfld.long 0x0 1. "ddr_io_bypass_out_en,ddr_io_bypass_out_en" "0,1" bitfld.long 0x0 0. "ddr_io_bypass_mode_en,ddr_io_bypass_mode_en" "0,1" line.long 0x4 "tcu_ddr_bsr_control__SET,TCU DDR BSR control register" bitfld.long 0x4 2. "ddr_io_bypass_out_data,ddr_io_bypass_out_data" "0,1" bitfld.long 0x4 1. "ddr_io_bypass_out_en,ddr_io_bypass_out_en" "0,1" bitfld.long 0x4 0. "ddr_io_bypass_mode_en,ddr_io_bypass_mode_en" "0,1" line.long 0x8 "tcu_ddr_bsr_control__CLR,TCU DDR BSR control register" eventfld.long 0x8 2. "ddr_io_bypass_out_data,ddr_io_bypass_out_data" "0,1" eventfld.long 0x8 1. "ddr_io_bypass_out_en,ddr_io_bypass_out_en" "0,1" eventfld.long 0x8 0. "ddr_io_bypass_mode_en,ddr_io_bypass_mode_en" "0,1" line.long 0xC "tcu_ddr_bsr_control__TOG,TCU DDR BSR control register" bitfld.long 0xC 2. "ddr_io_bypass_out_data,ddr_io_bypass_out_data" "0,1" bitfld.long 0xC 1. "ddr_io_bypass_out_en,ddr_io_bypass_out_en" "0,1" bitfld.long 0xC 0. "ddr_io_bypass_mode_en,ddr_io_bypass_mode_en" "0,1" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 1.--2. "tcu_fuse_obs,fuse observation" "0,1,2,3" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree.end tree "DWC_USB3" base ad:0x4C100000 rgroup.long 0x0++0x1F line.long 0x0 "CAPLENGTH,Capability Registers Length and Host Controller Operational Registers" hexmask.long.word 0x0 16.--31. 1. "HCIVERSION,Host Controller Interface Version Number" newline hexmask.long.byte 0x0 0.--7. 1. "CAPLENGTH,Capability Registers Length" line.long 0x4 "HCSPARAMS1,Structural Parameters 1 Register" hexmask.long.byte 0x4 24.--31. 1. "MAXPORTS,Number of Ports" newline hexmask.long.word 0x4 8.--18. 1. "MAXINTRS,Number of Interrupters" newline hexmask.long.byte 0x4 0.--7. 1. "MAXSLOTS,Number of Device Slots" line.long 0x8 "HCSPARAMS2,Structural Parameters 2 Register" hexmask.long.byte 0x8 27.--31. 1. "MAXSCRATCHPADBUFS,Max Scratchpad Bufs Lo" newline bitfld.long 0x8 26. "SPR,Scratchpad Restore" "0,1" newline hexmask.long.byte 0x8 21.--25. 1. "MAXSCRATCHPADBUFS_HI,Max Scratchpad Bufs HI" newline hexmask.long.byte 0x8 4.--7. 1. "ERSTMAX,Event Ring Segment Table Max" newline hexmask.long.byte 0x8 0.--3. 1. "IST,Isochronous Scheduling Threshold" line.long 0xC "HCSPARAMS3,Structural Parameters 3 Register" hexmask.long.word 0xC 16.--31. 1. "U2_DEVICE_EXIT_LAT,U2 Device Exit Latency" newline hexmask.long.byte 0xC 0.--7. 1. "U1_DEVICE_EXIT_LAT,U1 Device Exit Latency" line.long 0x10 "HCCPARAMS1,Capability Parameters 1 Register" hexmask.long.word 0x10 16.--31. 1. "XECP,xHCI Extended Capabilities Pointer" newline hexmask.long.byte 0x10 12.--15. 1. "MAXPSASIZE,Maximum Primary Stream Array Size" newline bitfld.long 0x10 11. "CFC,Contiguous Frame ID Capability" "0,1" newline bitfld.long 0x10 10. "SEC,Stopped EDLTA Capability" "0,1" newline bitfld.long 0x10 9. "SPC,Short Packet Capability" "0,1" newline bitfld.long 0x10 8. "PAE,Parse All Event Data" "0,1" newline bitfld.long 0x10 7. "NSS,No Secondary SID Support" "0,1" newline bitfld.long 0x10 6. "LTC,Latency Tolerance Messaging Capability" "0,1" newline bitfld.long 0x10 5. "LHRC,Light HC Reset Capability" "0,1" newline bitfld.long 0x10 4. "PIND,Port Indicators" "0,1" newline bitfld.long 0x10 3. "PPC,Port Power Control" "0,1" newline bitfld.long 0x10 2. "CSZ,Context Size" "0,1" newline bitfld.long 0x10 1. "BNC,BW Negotiation Capability" "0,1" newline bitfld.long 0x10 0. "AC64,64-bit Addressing Capability" "0,1" line.long 0x14 "DBOFF,Doorbell Offset Register" hexmask.long 0x14 2.--31. 1. "DOORBELL_ARRAY_OFFSET,Doorbell Array Offset" line.long 0x18 "RTSOFF,Runtime Register Space Offset Register" hexmask.long 0x18 5.--31. 1. "RUNTIME_REG_SPACE_OFFSET,Runtime Register Space Offset" line.long 0x1C "HCCPARAMS2,Host Controller Capability Parameters 2" bitfld.long 0x1C 5. "CIC,Configuration Information Capability" "0,1" newline bitfld.long 0x1C 4. "LEC,Large ESIT Payload Capability" "0,1" newline bitfld.long 0x1C 3. "CTC,Compliance Transition Capability" "0,1" newline bitfld.long 0x1C 2. "FSC,Force Save Context Capability" "0,1" newline bitfld.long 0x1C 1. "CMC,Configure Endpoint Command Max Exit Latency Too Large Capability" "0,1" newline bitfld.long 0x1C 0. "U3C,U3 Entry Capability" "0,1" group.long 0x20++0x7 line.long 0x0 "USBCMD,USB Command Register" bitfld.long 0x0 13. "CME,CEM Enable" "0,1" newline bitfld.long 0x0 11. "EU3S,Enable U3 MFINDEX Stop" "0,1" newline bitfld.long 0x0 10. "EWE,Enable Wrap Event" "0,1" newline bitfld.long 0x0 9. "CRS,Controller Restore State" "0,1" newline bitfld.long 0x0 8. "CSS,Controller Save State" "0,1" newline bitfld.long 0x0 7. "LHCRST,Light Host Controller Reset" "0,1" newline bitfld.long 0x0 3. "HSEE,Host System Error Enable" "0,1" newline bitfld.long 0x0 2. "INTE,Interrupter Enable" "0,1" newline bitfld.long 0x0 1. "HCRST,Host Controller Reset" "0,1" newline bitfld.long 0x0 0. "R_S,Run/Stop" "0,1" line.long 0x4 "USBSTS,USB Status Register" rbitfld.long 0x4 12. "HCE,Host Controller Error" "0,1" newline rbitfld.long 0x4 11. "CNR,Controller Not Ready" "0,1" newline bitfld.long 0x4 10. "SRE,Save/Restore Error" "0,1" newline rbitfld.long 0x4 9. "RSS,Restore State Status" "0,1" newline rbitfld.long 0x4 8. "SSS,Save State Status" "0,1" newline bitfld.long 0x4 4. "PCD,Port Change Detect" "0,1" newline bitfld.long 0x4 3. "EINT,Event Interrupt" "0,1" newline bitfld.long 0x4 2. "HSE,Host System Error" "0,1" newline rbitfld.long 0x4 0. "HCH,HC Halted" "0,1" rgroup.long 0x28++0x3 line.long 0x0 "PAGESIZE,Page Size Register" hexmask.long.word 0x0 0.--15. 1. "PAGE_SIZE,Page Size" group.long 0x34++0xB line.long 0x0 "DNCTRL,Device Notification Register" hexmask.long.word 0x0 0.--15. 1. "N0_N15,Notification Enable" line.long 0x4 "CRCR_LO,Command Ring Control Register - Low" hexmask.long 0x4 6.--31. 1. "CMD_RING_PNTR,Command Ring Pointer" newline rbitfld.long 0x4 3. "CRR,Command Ring Running" "0,1" newline bitfld.long 0x4 2. "CA,Command Abort" "0,1" newline bitfld.long 0x4 1. "CS,Command Stop" "0,1" newline bitfld.long 0x4 0. "RCS,Ring Cycle State" "0,1" line.long 0x8 "CRCR_HI,Command Ring Control Register - High" hexmask.long 0x8 0.--31. 1. "CMD_RING_PNTR,Command Ring Pointer" group.long 0x50++0xB line.long 0x0 "DCBAAP_LO,Device Context Base Address Array Pointer Register - Low" hexmask.long 0x0 6.--31. 1. "DEVICE_CONTEXT_BAAP,Device Context Base Address Array Pointer" line.long 0x4 "DCBAAP_HI,Device Context Base Address Array Pointer Register -High" hexmask.long 0x4 0.--31. 1. "DEVICE_CONTEXT_BAAP,Device Context Base Address Array Pointer" line.long 0x8 "CONFIG,Configuration Register" bitfld.long 0x8 9. "CIE,Configuration Information Enable" "0,1" newline bitfld.long 0x8 8. "U3E,U3 Entry Enable" "0,1" newline hexmask.long.byte 0x8 0.--7. 1. "MAXSLOTSEN,Max Device Slots Enabled" group.long 0x100++0x3 line.long 0x0 "USB1_WAKEUP_CTRL,USB1 Wakeup Register" bitfld.long 0x0 31. "OTG_WAKE_ENABLE,Global Wakeup Interrupt Enable" "0,1" newline bitfld.long 0x0 16. "PHY_BYPASSSEL,Transmitter Digital Bypass Select" "0,1" newline bitfld.long 0x0 15. "PHY_BYPASSDPEN,DP Transmitter Digital Bypass Enable" "0,1" newline bitfld.long 0x0 14. "PHY_BYPASSDPDATA,Data for DP Transmitter Digital Bypass" "0,1" newline bitfld.long 0x0 13. "PHY_BYPASSDMEN,DM Transmitter Digital Bypass Enable" "0,1" newline bitfld.long 0x0 12. "PHY_BYPASSDMDATA,Data for DM Transmitter Digital Bypass" "0,1" newline bitfld.long 0x0 11. "LOWSPEED_EN,Enable low speed AutoResume feature." "0: Full/high speed,1: Low speed" newline bitfld.long 0x0 10. "AUTORESUME_ENDLY,Tuning the timing between dp/dm data and enable signal when AutoResume finish" "0,1" newline bitfld.long 0x0 9. "AUTORESUME_DATADLY,See to the bitfield description for AUTORESUME_ENDLY." "0: Disable,1: Enable" newline bitfld.long 0x0 8. "AUTORESUME_EN,Enable AutoResume feature. When using phy_bypass signal it should be 1'b0." "0: Disable,1: Enable" newline bitfld.long 0x0 5. "OTG_CONN_WAKEUP_EN,Enable signal for wakeup from connection or disconnection only for SuperSpeed." "0,1" newline bitfld.long 0x0 4. "OTG_VBUS_SOURCE_SEL,no description available" "0: Select vbus_valid,1: Select sessvld" newline bitfld.long 0x0 3. "OTG_U3_WAKE_EN,Enable signal for wake up from u3 state only for SuperSpeed." "0: Disable,1: Enable" newline bitfld.long 0x0 2. "OTG_ID_WAKEUP_EN,Enable signal for wake up from id change." "0: Disable,1: Enable" newline bitfld.long 0x0 1. "OTG_VBUS_WAKE_EN,Enable signal for wake up from vbus valid or session valid changes." "0: Disable,1: Enable" newline bitfld.long 0x0 0. "OTG_WKDPDMCHG_EN,Enable signal for wake up from dp/dm change." "0: Disable,1: Enable" rgroup.long 0x104++0x3 line.long 0x0 "USB1_WAKEUP_STATUS,USB1 Wakeup Status Register" bitfld.long 0x0 31. "OTG_WAKEUP_INTERRUPT,It is OR of all wakeup interrupt then AND with otg_wakeup_enable" "0,1" newline bitfld.long 0x0 13. "OTG_CONN_WAKEUP_INTERRUPT,Interrupt status of connection" "0,1" newline bitfld.long 0x0 11.--12. "PIPE3_POWERDOWN,Pipe powerdown" "0,1,2,3" newline bitfld.long 0x0 10. "OTG_HOST_MODE,USB drd mode indicator" "0: Device mode,1: Host mode" newline bitfld.long 0x0 9. "PIPE_RXELECIDLE,Pipe_rxelecidel wakeup source" "0,1" newline bitfld.long 0x0 8. "OTG_PHY_OTGSESSVLD0,Session valid wakeup source" "0,1" newline bitfld.long 0x0 7. "OTG_PHY_VBUSVALID0,Vbus valid wakeup source" "0,1" newline bitfld.long 0x0 6. "OTG_PHY_IDDIG0,ID status wakeup source" "0,1" newline bitfld.long 0x0 5. "OTG_PHY_LINESTATE0_1,Linestate[1] wakeup source" "0,1" newline bitfld.long 0x0 4. "OTG_PHY_LINESTATE0_0,Linestate[0] wakeup source" "0,1" newline bitfld.long 0x0 3. "OTG_U3_WAKEUP_INTERRUPT,Interrupt status of wakeup from u3 state" "0,1" newline bitfld.long 0x0 2. "OTG_ID_WAKEUP_INTERRUPT,Interrupt status of wakeup from id." "0,1" newline bitfld.long 0x0 1. "OTG_VBUS_SESSVLD_WAKEUP_INTERRUPT,Interrupt status of vbus or session valid signal" "0,1" newline bitfld.long 0x0 0. "OTG_DP_DM_WAKEUP_INTERRUPT,Interrupt status of dm or dp otg_dp_wakeup_interrupt | otg_dm_wakeup_interrupt" "0,1" group.long 0x108++0x3 line.long 0x0 "USB2_WAKEUP_CTRL,USB2 Wakeup Register" bitfld.long 0x0 31. "OTG_WAKE_ENABLE,Global Wakeup Interrupt Enable" "0,1" newline bitfld.long 0x0 16. "PHY_BYPASSSEL,Transmitter Digital Bypass Select" "0,1" newline bitfld.long 0x0 15. "PHY_BYPASSDPEN,DP Transmitter Digital Bypass Enable" "0,1" newline bitfld.long 0x0 14. "PHY_BYPASSDPDATA,Data for DP Transmitter Digital Bypass" "0,1" newline bitfld.long 0x0 13. "PHY_BYPASSDMEN,DM Transmitter Digital Bypass Enable" "0,1" newline bitfld.long 0x0 12. "PHY_BYPASSDMDATA,Data for DM Transmitter Digital Bypass" "0,1" newline bitfld.long 0x0 11. "LOWSPEED_EN,Enable low speed AutoResume feature." "0: Full/high speed,1: Low speed" newline bitfld.long 0x0 10. "AUTORESUME_ENDLY,Tuning the timing between dp/dm data and enable signal when AutoResume finish" "0,1" newline bitfld.long 0x0 9. "AUTORESUME_DATADLY,See to the bitfield description for AUTORESUME_ENDLY." "0: Disable,1: Enable" newline bitfld.long 0x0 8. "AUTORESUME_EN,Enable AutoResume feature. When using phy_bypass signal it should be 1'b0." "0: Disable,1: Enable" newline bitfld.long 0x0 5. "OTG_CONN_WAKEUP_EN,Enable signal for wakeup from connection or disconnection only for SuperSpeed." "0,1" newline bitfld.long 0x0 4. "OTG_VBUS_SOURCE_SEL,no description available" "0: Select vbus_valid,1: Select sessvld" newline bitfld.long 0x0 3. "OTG_U3_WAKE_EN,Enable signal for wake up from u3 state only for SuperSpeed." "0: Disable,1: Enable" newline bitfld.long 0x0 2. "OTG_ID_WAKEUP_EN,Enable signal for wake up from id change." "0: Disable,1: Enable" newline bitfld.long 0x0 1. "OTG_VBUS_WAKE_EN,Enable signal for wake up from vbus valid or session valid changes." "0: Disable,1: Enable" newline bitfld.long 0x0 0. "OTG_WKDPDMCHG_EN,Enable signal for wake up from dp/dm change." "0: Disable,1: Enable" rgroup.long 0x10C++0x3 line.long 0x0 "USB2_WAKEUP_STATUS,USB2 Wakeup Status Register" bitfld.long 0x0 31. "OTG_WAKEUP_INTERRUPT,It is OR of all wakeup interrupt then AND with otg_wakeup_enable" "0,1" newline bitfld.long 0x0 13. "OTG_CONN_WAKEUP_INTERRUPT,Interrupt status of connection" "0,1" newline bitfld.long 0x0 11.--12. "PIPE3_POWERDOWN,Pipe powerdown" "0,1,2,3" newline bitfld.long 0x0 10. "OTG_HOST_MODE,USB drd mode indicator" "0: Device mode,1: Host mode" newline bitfld.long 0x0 9. "PIPE_RXELECIDLE,Pipe_rxelecidel wakeup source" "0,1" newline bitfld.long 0x0 8. "OTG_PHY_OTGSESSVLD0,Session valid wakeup source" "0,1" newline bitfld.long 0x0 7. "OTG_PHY_VBUSVALID0,Vbus valid wakeup source" "0,1" newline bitfld.long 0x0 6. "OTG_PHY_IDDIG0,ID status wakeup source" "0,1" newline bitfld.long 0x0 5. "OTG_PHY_LINESTATE0_1,Linestate[1] wakeup source" "0,1" newline bitfld.long 0x0 4. "OTG_PHY_LINESTATE0_0,Linestate[0] wakeup source" "0,1" newline bitfld.long 0x0 3. "OTG_U3_WAKEUP_INTERRUPT,Interrupt status of wakeup from u3 state" "0,1" newline bitfld.long 0x0 2. "OTG_ID_WAKEUP_INTERRUPT,Interrupt status of wakeup from id." "0,1" newline bitfld.long 0x0 1. "OTG_VBUS_SESSVLD_WAKEUP_INTERRUPT,Interrupt status of vbus or session valid signal" "0,1" newline bitfld.long 0x0 0. "OTG_DP_DM_WAKEUP_INTERRUPT,Interrupt status of dm or dp otg_dp_wakeup_interrupt | otg_dm_wakeup_interrupt" "0,1" group.long 0x420++0x7 line.long 0x0 "PORTSC_20,USB2 Port Status and Control Register" rbitfld.long 0x0 30. "DR,Device Removable" "0,1" newline bitfld.long 0x0 27. "WOE,Wake on Overcurrent Enable" "0,1" newline bitfld.long 0x0 26. "WDE,Wake on Disconnect Enable" "0,1" newline bitfld.long 0x0 25. "WCE,Wake on Connect Enable" "0,1" newline rbitfld.long 0x0 24. "CAS,Cold Attach Status" "0,1" newline eventfld.long 0x0 22. "PLC,Port Link State Change" "0,1" newline eventfld.long 0x0 21. "PRC,Port Reset Change" "0,1" newline eventfld.long 0x0 20. "OCC,Over Current Change" "0,1" newline eventfld.long 0x0 18. "PEC,Port Enabled/Disabled Change" "0,1" newline eventfld.long 0x0 17. "CSC,Connect Status Change" "0,1" newline bitfld.long 0x0 16. "LWS,Port Link State Write Strobe" "0,1" newline bitfld.long 0x0 14.--15. "PIC,Port Indicator Control" "0,1,2,3" newline hexmask.long.byte 0x0 10.--13. 1. "PORTSPEED,Port Speed" newline bitfld.long 0x0 9. "PP,Port Power" "0,1" newline hexmask.long.byte 0x0 5.--8. 1. "PLS,Port Link State" newline bitfld.long 0x0 4. "PR,Port Reset" "0,1" newline rbitfld.long 0x0 3. "OCA,Over Current Active" "0,1" newline eventfld.long 0x0 1. "PED,Port Enabled/Disabled" "0,1" newline rbitfld.long 0x0 0. "CCS,Current Connect Status" "0,1" line.long 0x4 "PORTPMSC_20,USB2 Port Power Management Status and Control Register" hexmask.long.byte 0x4 28.--31. 1. "PRTTSTCTRL,Port Test Control When this field is '0' the port is NOT operating in a test mode" newline bitfld.long 0x4 16. "HLE,Hardware LPM Enable" "0,1" newline hexmask.long.byte 0x4 8.--15. 1. "L1DSLOT,L1 Device Slot" newline hexmask.long.byte 0x4 4.--7. 1. "BESL,Best Effort Service Latency" newline bitfld.long 0x4 3. "RWE,Remote Wake Enable" "0,1" newline rbitfld.long 0x4 0.--2. "L1S,L1 Status" "0,1,2,3,4,5,6,7" rgroup.long 0x428++0x3 line.long 0x0 "PORTLI_20,USB2 Port Link Information Register" group.long 0x42C++0xB line.long 0x0 "PORTHLPMC_20,USB2 Port Hardware LPM Control Register" hexmask.long.byte 0x0 10.--13. 1. "BESLD,Best Effort Service Latency Deep" newline hexmask.long.byte 0x0 2.--9. 1. "L1_TIMEOUT,L1 Timeout" newline bitfld.long 0x0 0.--1. "HIRDM,Host Initiated Resume Duration Mode" "0,1,2,3" line.long 0x4 "PORTSC_30,USB3 Port Status and Control Register" bitfld.long 0x4 31. "WPR,Warm Port Reset" "0,1" newline rbitfld.long 0x4 30. "DR,Device Removable" "0,1" newline bitfld.long 0x4 27. "WOE,Wake on Overcurrent Enable" "0,1" newline bitfld.long 0x4 26. "WDE,Wake on Disconnect Enable" "0,1" newline bitfld.long 0x4 25. "WCE,Wake on Connect Enable" "0,1" newline rbitfld.long 0x4 24. "CAS,Cold Attach Status" "0,1" newline eventfld.long 0x4 23. "CEC,Port Config Error Change" "0,1" newline eventfld.long 0x4 22. "PLC,Port Link State Change" "0,1" newline eventfld.long 0x4 21. "PRC,Port Reset Change" "0,1" newline eventfld.long 0x4 20. "OCC,Over Current Change" "0,1" newline eventfld.long 0x4 19. "WRC,Warm Port Reset Change" "0,1" newline eventfld.long 0x4 18. "PEC,Port Enabled/Disabled Change" "0,1" newline eventfld.long 0x4 17. "CSC,Connect Status Change" "0,1" newline bitfld.long 0x4 16. "LWS,Port Link State Write Strobe" "0,1" newline bitfld.long 0x4 14.--15. "PIC,Port Indicator Control" "0,1,2,3" newline hexmask.long.byte 0x4 10.--13. 1. "PORTSPEED,Port Speed" newline bitfld.long 0x4 9. "PP,Port Power" "0,1" newline hexmask.long.byte 0x4 5.--8. 1. "PLS,Port Link State" newline bitfld.long 0x4 4. "PR,Port Reset" "0,1" newline rbitfld.long 0x4 3. "OCA,Over Current Active" "0,1" newline eventfld.long 0x4 1. "PED,Port Enabled/Disabled" "0,1" newline rbitfld.long 0x4 0. "CCS,Current Connect Status" "0,1" line.long 0x8 "PORTPMSC_30,USB3 Port Power Management Status and Control Register" bitfld.long 0x8 16. "FLA,Force Link PM Accept" "0,1" newline hexmask.long.byte 0x8 8.--15. 1. "U2_TIMEOUT,U2 Timeout" newline hexmask.long.byte 0x8 0.--7. 1. "U1_TIMEOUT,U1 Timeout" rgroup.long 0x438++0xB line.long 0x0 "PORTLI_30,USB3 Port Link Information Register" hexmask.long.word 0x0 0.--15. 1. "LINK_ERROR_COUNT,Link Error Count" line.long 0x4 "PORTHLPMC_30,USB3 Port Hardware LPM Control Register" line.long 0x8 "MFINDEX,Microframe Index Register" hexmask.long.word 0x8 0.--13. 1. "MICROFRAME_INDEX,Microframe Index" group.long 0x460++0xB line.long 0x0 "IMAN,Interrupter Management Register" bitfld.long 0x0 1. "IE,Interrupt Enable" "0,1" newline eventfld.long 0x0 0. "IP,Interrupt Pending" "0,1" line.long 0x4 "IMOD,Interrupter Moderation Register" hexmask.long.word 0x4 16.--31. 1. "IMODC,Interrupt Moderation Counter" newline hexmask.long.word 0x4 0.--15. 1. "IMODI,Interrupt Moderation Interval" line.long 0x8 "ERSTSZ,Event Ring Segment Table Size Register" hexmask.long.word 0x8 0.--15. 1. "ERS_TABLE_SIZE,Event Ring Segment Table Size" group.long 0x470++0x13 line.long 0x0 "ERSTBA_LO,Event Ring Segment Table Base Address Register - Low" hexmask.long 0x0 6.--31. 1. "ERS_TABLE_BAR,Event Ring Segment Table Base Address" line.long 0x4 "ERSTBA_HI,Event Ring Segment Table Base Address Register -Low" hexmask.long 0x4 0.--31. 1. "ERS_TABLE_BAR,Event Ring Segment Table Base Address" line.long 0x8 "ERDP_LO,Event Ring Dequeue Register - Low" hexmask.long 0x8 4.--31. 1. "ERD_PNTR,Event Ring Dequeue Pointer" newline eventfld.long 0x8 3. "EHB,Event Handler Busy" "0,1" newline bitfld.long 0x8 0.--2. "DESI,Dequeue ERST Segment Index" "0,1,2,3,4,5,6,7" line.long 0xC "ERDP_HI,Event Ring Dequeue Register - Low" hexmask.long 0xC 0.--31. 1. "ERD_PNTR,Event Ring Dequeue Pointer" line.long 0x10 "DB,Doorbell Register" hexmask.long.word 0x10 16.--31. 1. "DB_STREAM_ID,Doorbell Stream ID" newline hexmask.long.byte 0x10 0.--7. 1. "DB_TARGET,Doorbell Target" group.long 0x880++0x7 line.long 0x0 "USBLEGSUP,USB Legacy Support Capability Register" bitfld.long 0x0 24. "HC_OS_OWNED,HC OS Owned Semaphore" "0,1" newline bitfld.long 0x0 16. "HC_BIOS_OWNED,HC BIOS Owned Semaphore" "0,1" newline hexmask.long.byte 0x0 8.--15. 1. "NEXT_CAPABILITY_POINTER,Next Capability Pointer" newline hexmask.long.byte 0x0 0.--7. 1. "CAPABILITY_ID,Capability ID" line.long 0x4 "USBLEGCTLSTS,USB Legacy Support Control/Status Register" bitfld.long 0x4 31. "SMI_ON_BAR,SMI on BAR" "0,1" newline bitfld.long 0x4 30. "SMI_ON_PCI,SMI on PCI Command" "0,1" newline bitfld.long 0x4 29. "SMI_ON_OS,SMI on Ownership Change" "0,1" newline rbitfld.long 0x4 20. "SMI_ON_HOST,SMI on Host System Error" "0,1" newline rbitfld.long 0x4 16. "SMI_ON_EVENT,SMI on Event Enable" "0,1" newline bitfld.long 0x4 15. "SMI_ON_BAR_E,SMI on BAR Enable" "0,1" newline bitfld.long 0x4 14. "SMI_ON_PCI_E,SMI on PCI Command Enable" "0,1" newline bitfld.long 0x4 13. "SMI_ON_OS_E,SMI on OS Ownership Enable" "0,1" newline bitfld.long 0x4 4. "SMI_ON_HOST_E,SMI on Host System Error Enable" "0,1" newline bitfld.long 0x4 0. "USB_SMI_ENABLE,USB SMI Enable" "0,1" rgroup.long 0x890++0x1F line.long 0x0 "SUPTPRT2_DW0,USB2 xHCI Supported Protocol Capability Data Word 0 Register" hexmask.long.byte 0x0 24.--31. 1. "MAJOR_REVISION,Major Revision" newline hexmask.long.byte 0x0 16.--23. 1. "MINOR_REVISION,Minor Revision" newline hexmask.long.byte 0x0 8.--15. 1. "NEXT_CAPABILITY_POINTER,Next Capability Pointer" newline hexmask.long.byte 0x0 0.--7. 1. "CAPABILITY_ID,Capability ID" line.long 0x4 "SUPTPRT2_DW1,USB2 xHCI Supported Protocol Capability Data Word 1 Register" hexmask.long 0x4 0.--31. 1. "NAME_STRING,Name String" line.long 0x8 "SUPTPRT2_DW2,USB2 xHCI Supported Protocol Capability Data Word 2 Register" hexmask.long.byte 0x8 28.--31. 1. "PSIC,Protocol Speed ID Count" newline bitfld.long 0x8 25.--27. "MHD,Hub Depth" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 20. "BLC,BESL LPM Capability" "0,1" newline bitfld.long 0x8 19. "HLC,Compatible Port Offset" "0,1" newline bitfld.long 0x8 18. "IHI,IHI" "0,1" newline bitfld.long 0x8 17. "HSO,HSO" "0,1" newline hexmask.long.byte 0x8 8.--15. 1. "COMPATIBLE_PORT_COUNT,Compatible Port Count" newline hexmask.long.byte 0x8 0.--7. 1. "COMPATIBLE_PORT_OFFSET,Compatible Port Offset" line.long 0xC "SUPTPRT2_DW3,USB2 xHCI Supported Protocol Capability Data Word 3 Register" hexmask.long.byte 0xC 0.--4. 1. "PROTCL_SLT_TY,Protocol Slot Type" line.long 0x10 "SUPTPRT3_DW0,USB3 xHCI Supported Protocol Capability Data Word 0 Register" hexmask.long.byte 0x10 24.--31. 1. "MAJOR_REVISION,Major Revision" newline hexmask.long.byte 0x10 16.--23. 1. "MINOR_REVISION,Minor Revision" newline hexmask.long.byte 0x10 8.--15. 1. "NEXT_CAPABILITY_POINTER,Next Capability Pointer" newline hexmask.long.byte 0x10 0.--7. 1. "CAPABILITY_ID,Capability ID" line.long 0x14 "SUPTPRT3_DW1,USB3 xHCI Supported Protocol Capability Data Word 1 Register" hexmask.long 0x14 0.--31. 1. "NAME_STRING,Name String" line.long 0x18 "SUPTPRT3_DW2,USB3 xHCI Supported Protocol Capability Data Word 2 Register" hexmask.long.byte 0x18 28.--31. 1. "PSIC,Protocol Speed ID Count" newline bitfld.long 0x18 25.--27. "MHD,Hub Depth" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x18 8.--15. 1. "COMPATIBLE_PORT_COUNT,Compatible Port Count" newline hexmask.long.byte 0x18 0.--7. 1. "COMPATIBLE_PORT_OFFSET,Compatible Port Offset" line.long 0x1C "SUPTPRT3_DW3,USB3 xHCI Supported Protocol Capability Data Word 3 Register" hexmask.long.byte 0x1C 0.--4. 1. "PROTCL_SLT_TY,Protocol Slot Type" group.long 0xC100++0x13 line.long 0x0 "GSBUSCFG0,Global SoC Bus Configuration Register 0" hexmask.long.byte 0x0 28.--31. 1. "DATRDREQINFO,DATRDREQINFO AHB-prot/AXI-cache/OCP-ReqInfo for Data Read (DatRdReqInfo) Input to BUS-GM." newline hexmask.long.byte 0x0 24.--27. 1. "DESRDREQINFO,DESRDREQINFO AHB-prot/AXI-cache/OCP-ReqInfo for Descriptor Read (DesRdReqInfo). Input to BUS-GM." newline hexmask.long.byte 0x0 20.--23. 1. "DATWRREQINFO,DATWRREQINFO AHB-prot/AXI-cache/OCP-ReqInfo for Data Write (DatWrReqInfo). Input to BUS-GM." newline hexmask.long.byte 0x0 16.--19. 1. "DESWRREQINFO,DESWRREQINFO AHB-prot/AXI-cache/OCP-ReqInfo for Descriptor Write (DesWrReqInfo) Input to BUS-GM." newline bitfld.long 0x0 11. "DATBIGEND,Data Access is Big Endian" "0,1" newline bitfld.long 0x0 10. "DESBIGEND,Descriptor Access is Big Endian" "0,1" newline bitfld.long 0x0 7. "INCR256BRSTENA,INCR256 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 6. "INCR128BRSTENA,INCR128 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 5. "INCR64BRSTENA,INCR64 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 4. "INCR32BRSTENA,INCR32 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 3. "INCR16BRSTENA,INCR16 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 2. "INCR8BRSTENA,INCR8 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 1. "INCR4BRSTENA,INCR4 Burst Type Enable Input to BUS-GM" "0,1" newline bitfld.long 0x0 0. "INCRBRSTENA,Undefined Length INCR Burst Type Enable Input to BUS-GM" "0,1" line.long 0x4 "GSBUSCFG1,Global SoC Bus Configuration Register 1" bitfld.long 0x4 12. "EN1KPAGE,1k Page Boundary Enable" "0,1" newline hexmask.long.byte 0x4 8.--11. 1. "PIPETRANSLIMIT,AXI Pipelined Transfers Burst Request Limit" line.long 0x8 "GTXTHRCFG,Global Tx Threshold Control Register" bitfld.long 0x8 29. "USBTXPKTCNTSEL,USB Transmit Packet Count Enable" "0,1" newline hexmask.long.byte 0x8 24.--27. 1. "USBTXPKTCNT,USB Transmit Packet Count" newline hexmask.long.byte 0x8 16.--23. 1. "USBMAXTXBURSTSIZE,USB Maximum TX Burst Size" line.long 0xC "GRXTHRCFG,Global Rx Threshold Control Register" bitfld.long 0xC 29. "USBRXPKTCNTSEL,USB Receive Packet Count Enable" "0,1" newline hexmask.long.byte 0xC 24.--27. 1. "USBRXPKTCNT,USB Receive Packet Count" newline hexmask.long.byte 0xC 19.--23. 1. "USBMAXRXBURSTSIZE,USB Maximum Receive Burst Size" newline hexmask.long.word 0xC 0.--12. 1. "RESVISOCOUTSPC,Space Reserved in Rx FIFO for ISOC OUT" line.long 0x10 "GCTL,Global Core Control Register" hexmask.long.word 0x10 19.--31. 1. "PWRDNSCALE,Power Down Scale" newline bitfld.long 0x10 18. "MASTERFILTBYPASS,Master Filter Bypass" "0,1" newline bitfld.long 0x10 17. "BYPSSETADDR,Bypass SetAddress in Device Mode" "0,1" newline bitfld.long 0x10 16. "U2RSTECN,If the SuperSpeed connection fails during POLL or LMP exchange the device connects at non-SS mode" "0,1" newline bitfld.long 0x10 14.--15. "FRMSCLDWN,This field scales down device view of a SOF/USOF/ITP duration" "0,1,2,3" newline bitfld.long 0x10 12.--13. "PRTCAPDIR,Port Capability Direction" "0,1,2,3" newline bitfld.long 0x10 11. "CORESOFTRESET,Core Soft Reset" "0,1" newline bitfld.long 0x10 10. "SOFITPSYNC,If this bit is set to '0' operating in host mode the core keeps the UTMI/ULPI PHY on the first port in a non-suspended state whenever there is a SuperSpeed port that is not in Rx" "0,1" newline bitfld.long 0x10 9. "U1U2TimerScale,Disable U1/U2 timer Scaledown" "0,1" newline bitfld.long 0x10 8. "DEBUGATTACH,Debug Attach" "0,1" newline bitfld.long 0x10 6.--7. "RAMCLKSEL,RAM Clock Select" "0,1,2,3" newline bitfld.long 0x10 4.--5. "SCALEDOWN,Scale-Down Mode" "0,1,2,3" newline bitfld.long 0x10 3. "DISSCRAMBLE,Disable Scrambling" "0,1" newline bitfld.long 0x10 2. "U2EXIT_LFPS,If this bit is - 0: the link treats 248ns LFPS as a valid U2 exit" "0: the link treats 248ns LFPS as a valid U2 exit,?" newline rbitfld.long 0x10 1. "GblHibernationEn,Global Hibernation Enable" "0,1" newline bitfld.long 0x10 0. "DSBLCLKGTNG,Disable Clock Gating" "0,1" group.long 0xC118++0x7 line.long 0x0 "GSTS,Global Status Register" hexmask.long.word 0x0 20.--31. 1. "CBELT,Current BELT Value" newline rbitfld.long 0x0 11. "SSIC_IP,SSIC Interrupt Pending" "0,1" newline rbitfld.long 0x0 9. "BC_IP,Battery Charger Interrupt Pending" "0,1" newline rbitfld.long 0x0 7. "Host_IP,Host Interrupt Pending" "0,1" newline rbitfld.long 0x0 6. "Device_IP,Device Interrupt Pending" "0,1" newline bitfld.long 0x0 5. "CSRTimeout,CSR Timeout" "0,1" newline bitfld.long 0x0 4. "BUSERRADDRVLD,Bus Error Address Valid" "0,1" newline rbitfld.long 0x0 0.--1. "CURMOD,Current Mode of Operation" "0,1,2,3" line.long 0x4 "GUCTL1,Global User Control Register 1" bitfld.long 0x4 31. "DEV_DECOUPLE_L1L2_EVT,DEV_DECOUPLE_L1L2_EVT - 0: Default behavior no change in device events L1/L2U3 events are not decoupled (old behavior of v2" "0: Default behavior,?" newline bitfld.long 0x4 30. "DS_RXDET_MAX_TOUT_CTRL,DS_RXDET_MAX_TOUT_CTRL This bit is used to control the tRxDetectTimeoutDFP timer for the SuperSpeed link" "0,1" newline bitfld.long 0x4 29. "FILTER_SE0_FSLS_EOP,FILTER_SE0_FSLS_EOP - 0: Default behavior no change in Linestate check for SE0 detection in FS/LS - 1: Feature enabled FS/LS SE0 is filtered for 2 clocks for detecting EOP This bit is applicable for FS/LS operation" "0: Default behavior,1: Feature enabled" newline bitfld.long 0x4 28. "TX_IPGAP_LINECHECK_DIS,TX_IPGAP_LINECHECK_DIS - 0: Default behavior no change in Linestate check - 1: Feature enabled 2" "0: Default behavior,1: Feature enabled" newline bitfld.long 0x4 27. "DEV_TRB_OUT_SPR_IND,DEV_TRB_OUT_SPR_IND - 0: Default behavior no change in TRB status dword - 1: Feature enabled OUT TRB status indicates Short Packet This bit is applicable for device mode only (and ignored in host mode)" "0: Default behavior,1: Feature enabled" newline bitfld.long 0x4 26. "DEV_FORCE_20_CLK_FOR_30_CLK,DEV_FORCE_20_CLK_FOR_30_CLK - 0: Default behavior Uses 3" "0: Default behavior,?" newline bitfld.long 0x4 25. "P3_IN_U2,P3_IN_U2 - 0: Default behavior When SuperSpeed link is in U2 PowerState P2 is attempted on the PIPE Interface" "0: Default behavior,?" newline bitfld.long 0x4 24. "DEV_L1_EXIT_BY_HW,DEV_L1_EXIT_BY_HW - 0: Default behavior disables device L1 hardware exit logic - 1: feature enabled This bit is applicable for device mode (2" "0: Default behavior,1: feature enabled This bit is applicable for.." newline bitfld.long 0x4 21.--23. "IP_GAP_ADD_ON,This register field is used to add on to the default inter packet gap setting in the USB 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20. "DEV_LSP_TAIL_LOCK_DIS,DEV_LSP_TAIL_LOCK_DIS - 0: Default behavior enables device lsp lock logic for tail TRB update - 1: Fix disabled This is a bug fix for STAR 9000716195 that affects the CSP mode for OUT endpoints in device mode" "0: Default behavior,1: Fix disabled This is a bug fix for STAR.." newline bitfld.long 0x4 19. "NAK_PER_ENH_FS,NAK_PER_ENH_FS - 1: Enables performance enhancement for FS async endpoints in the presence of NAKs - 0: Enhancement not applied If a periodic endpoint is present and if a bulk endpoint which is also active is being NAKed by the device .." "0: Enhancement not applied If a periodic endpoint..,1: Enables performance enhancement for FS async.." newline bitfld.long 0x4 18. "NAK_PER_ENH_HS,NAK_PER_ENH_HS - 1: Enables performance enhancement for HS async endpoints in the presence of NAKs - 0: Enhancement not applied If a periodic endpoint is present and if a bulk endpoint which is also active is being NAKed by the device .." "0: Enhancement not applied If a periodic endpoint..,1: Enables performance enhancement for HS async.." newline bitfld.long 0x4 17. "PARKMODE_DISABLE_SS,PARKMODE_DISABLE_SS This bit is used only in host mode and is for debug purpose only" "0,1" newline bitfld.long 0x4 16. "PARKMODE_DISABLE_HS,PARKMODE_DISABLE_HS This bit is used only in host mode" "0,1" newline bitfld.long 0x4 15. "PARKMODE_DISABLE_FSLS,PARKMODE_DISABLE_FSLS This bit is used only in host mode and is for debug purpose only" "0,1" newline bitfld.long 0x4 10. "RESUME_OPMODE_HS_HOST,RESUME_OPMODE_HS_HOST This bit is used only in host mode and is for USB 2" "0,1" newline bitfld.long 0x4 9. "DEV_HS_NYET_BULK_SPR,DEV_HS_NYET_BULK_SPR - 0: Default behavior no change in device response - 1: Feature enabled HS bulk OUT short packet gets NYET response This bit is applicable for device mode only (and ignored in host mode) to be used in 2" "0: Default behavior,1: Feature enabled" newline bitfld.long 0x4 8. "L1_SUSP_THRLD_EN_FOR_HOST,L1_SUSP_THRLD_EN_FOR_HOST This bit is used only in host mode" "0,1" newline hexmask.long.byte 0x4 4.--7. 1. "L1_SUSP_THRLD_FOR_HOST,L1_SUSP_THRLD_FOR_HOST This field is effective only when the L1_SUSP_THRLD_EN_FOR_HOST bit is set to 1" newline bitfld.long 0x4 3. "HC_ERRATA_ENABLE,Host ELD Enable" "0,1" newline bitfld.long 0x4 2. "HC_PARCHK_DISABLE,Host Parameter Check Disable" "0,1" newline bitfld.long 0x4 1. "OVRLD_L1_SUSP_COM,OVRLD_L1_SUSP_COM If this bit is set the utmi_l1_suspend_com_n is overloaded with the utmi_sleep_n signal" "0,1" newline bitfld.long 0x4 0. "LOA_FILTER_EN,LOA_FILTER_EN If this bit is set the USB 2" "0,1" group.long 0xC128++0x7 line.long 0x0 "GUID,Global User ID Register" hexmask.long 0x0 0.--31. 1. "USERID,User ID" line.long 0x4 "GUCTL,Global User Control Register" hexmask.long.word 0x4 22.--31. 1. "REFCLKPER,This field indicates in terms of nano seconds the period of ref_clk" newline bitfld.long 0x4 21. "NoExtrDl,No Extra Delay Between SOF and the First Packet" "0,1" newline bitfld.long 0x4 17. "SprsCtrlTransEn,Sparse Control Transaction Enable" "0,1" newline bitfld.long 0x4 16. "ResBwHSEPS,Reserving 85% Bandwidth for HS Periodic EPs" "0,1" newline bitfld.long 0x4 14. "USBHstInAutoRetryEn,Host IN Auto Retry" "0,1" newline bitfld.long 0x4 13. "EnOverlapChk,Enable Check for LFPS Overlap During Remote Ux Exit: If this bit is set to - 1'b1: The SuperSpeed link when exiting U1/U2/U3 waits for either the remote link LFPS or TS1/TS2 training symbols before it confirms that the LFPS handshake is.." "?,1: The SuperSpeed link when exiting U1/U2/U3 waits.." newline bitfld.long 0x4 12. "ExtCapSupptEN,External Extended Capability Support Enable" "0,1" newline bitfld.long 0x4 11. "InsrtExtrFSBODI,Insert Extra Delay Between FS Bulk OUT Transactions" "0,1" newline bitfld.long 0x4 9.--10. "DTCT,Device Timeout Coarse Tuning" "0,1,2,3" newline hexmask.long.word 0x4 0.--8. 1. "DTFT,Device Timeout Fine Tuning" rgroup.long 0xC130++0x7 line.long 0x0 "GBUSERRADDRLO,Global SoC Bus Error Address Register - Low" hexmask.long 0x0 0.--31. 1. "BUSERRADDR,Bus Address - Low" line.long 0x4 "GBUSERRADDRHI,Global SoC Bus Error Address Register - High" hexmask.long 0x4 0.--31. 1. "BUSERRADDR,Bus Address - High" group.long 0xC138++0x7 line.long 0x0 "GPRTBIMAPLO,Global SS Port to Bus Instance Mapping Register - Low" hexmask.long.byte 0x0 28.--31. 1. "BINUM8,SS USB Instance Number for Port 8. Application-programmable ID field." newline hexmask.long.byte 0x0 24.--27. 1. "BINUM7,SS USB Instance Number for Port 7. Application-programmable ID field." newline hexmask.long.byte 0x0 20.--23. 1. "BINUM6,SS USB Instance Number for Port 6. Application-programmable ID field." newline hexmask.long.byte 0x0 16.--19. 1. "BINUM5,SS USB Instance Number for Port 5. Application-programmable ID field." newline hexmask.long.byte 0x0 12.--15. 1. "BINUM4,SS USB Instance Number for Port 4. Application-programmable ID field." newline hexmask.long.byte 0x0 8.--11. 1. "BINUM3,SS USB Instance Number for Port 3. Application-programmable ID field." newline hexmask.long.byte 0x0 4.--7. 1. "BINUM2,SS USB Instance Number for Port 2. Application-programmable ID field." newline hexmask.long.byte 0x0 0.--3. 1. "BINUM1,SS USB Instance Number for Port 1. Application-programmable ID field." line.long 0x4 "GPRTBIMAPHI,Global SS Port to Bus Instance Mapping Register - High" hexmask.long.byte 0x4 24.--27. 1. "BINUM15,SS USB Instance Number for Port 15. Application-programmable ID field." newline hexmask.long.byte 0x4 20.--23. 1. "BINUM14,SS USB Instance Number for Port 14. Application-programmable ID field." newline hexmask.long.byte 0x4 16.--19. 1. "BINUM13,SS USB Instance Number for Port 13. Application-programmable ID field." newline hexmask.long.byte 0x4 12.--15. 1. "BINUM12,SS USB Instance Number for Port 12. Application-programmable ID field." newline hexmask.long.byte 0x4 8.--11. 1. "BINUM11,SS USB Instance Number for Port 11. Application-programmable ID field." newline hexmask.long.byte 0x4 4.--7. 1. "BINUM10,SS USB Instance Number for Port 10. Application-programmable ID field." newline hexmask.long.byte 0x4 0.--3. 1. "BINUM9,SS USB Instance Number for Port 9. Application-programmable ID field." rgroup.long 0xC140++0x1F line.long 0x0 "GHWPARAMS0,Global Hardware Parameters Register 0" hexmask.long.byte 0x0 24.--31. 1. "GHWPARAMS0_31_24,`DWC_USB3_AWIDTH" newline hexmask.long.byte 0x0 16.--23. 1. "GHWPARAMS0_23_16,`DWC_USB3_SDWIDTH" newline hexmask.long.byte 0x0 8.--15. 1. "GHWPARAMS0_15_8,`DWC_USB3_MDWIDTH" newline bitfld.long 0x0 6.--7. "GHWPARAMS0_7_6,`DWC_USB3_SBUS_TYPE" "0,1,2,3" newline bitfld.long 0x0 3.--5. "GHWPARAMS0_5_3,`DWC_USB3_MBUS_TYPE" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0.--2. "GHWPARAMS0_2_0,`DWC_USB3_MODE" "0,1,2,3,4,5,6,7" line.long 0x4 "GHWPARAMS1,Global Hardware Parameters Register 1" bitfld.long 0x4 31. "GHWPARAMS1_31,`DWC_USB3_EN_DBC" "0,1" newline bitfld.long 0x4 30. "GHWPARAMS1_30,`DWC_USB3_RM_OPT_FEATURES" "0,1" newline bitfld.long 0x4 29. "GHWPARAMS1_29,Reserved1" "0,1" newline bitfld.long 0x4 28. "GHWPARAMS1_28,`DWC_USB3_RAM_BUS_CLKS_SYNC" "0,1" newline bitfld.long 0x4 27. "GHWPARAMS1_27,`DWC_USB3_MAC_RAM_CLKS_SYNC" "0,1" newline bitfld.long 0x4 26. "GHWPARAMS1_26,`DWC_USB3_MAC_PHY_CLKS_SYNC" "0,1" newline bitfld.long 0x4 24.--25. "GHWPARAMS1_25_24,`DWC_USB3_EN_PWROPT" "0,1,2,3" newline bitfld.long 0x4 23. "GHWPARAMS1_23,`DWC_USB3_SPRAM_TYP" "0,1" newline bitfld.long 0x4 21.--22. "GHWPARAMS1_22_21,`DWC_USB3_NUM_RAMS" "0,1,2,3" newline hexmask.long.byte 0x4 15.--20. 1. "GHWPARAMS1_20_15,`DWC_USB3_DEVICE_NUM_INT For details on `DWC_USB3_DEVICE_NUM_INT refer to /src/DWC_usb3_params" newline bitfld.long 0x4 12.--14. "GHWPARAMS1_14_12,`DWC_USB3_ASPACEWIDTH" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 9.--11. "GHWPARAMS1_11_9,`DWC_USB3_REQINFOWIDTH" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 6.--8. "GHWPARAMS1_8_6,`DWC_USB3_DATAINFOWIDTH" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 3.--5. "GHWPARAMS1_5_3,`DWC_USB3_BURSTWIDTH-1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 0.--2. "GHWPARAMS1_2_0,`DWC_USB3_IDWIDTH-1" "0,1,2,3,4,5,6,7" line.long 0x8 "GHWPARAMS2,Global Hardware Parameters Register 2" hexmask.long 0x8 0.--31. 1. "GHWPARAMS2_31_0,`DWC_USB3_USERID" line.long 0xC "GHWPARAMS3,Global Hardware Parameters Register 3" hexmask.long.byte 0xC 23.--30. 1. "GHWPARAMS3_30_23,`DWC_USB3_CACHE_TOTAL_XFER_RESOURCES" newline hexmask.long.byte 0xC 18.--22. 1. "GHWPARAMS3_22_18,`DWC_USB3_NUM_IN_EPS" newline hexmask.long.byte 0xC 12.--17. 1. "GHWPARAMS3_17_12,`DWC_USB3_NUM_EPS" newline bitfld.long 0xC 11. "GHWPARAMS3_11,`DWC_USB3_ULPI_CARKIT" "0,1" newline bitfld.long 0xC 10. "GHWPARAMS3_10,`DWC_USB3_VENDOR_CTL_INTERFACE" "0,1" newline bitfld.long 0xC 6.--7. "GHWPARAMS3_7_6,`DWC_USB3_HSPHY_DWIDTH" "0,1,2,3" newline bitfld.long 0xC 4.--5. "GHWPARAMS3_5_4,`DWC_USB3_FSPHY_INTERFACE" "0,1,2,3" newline bitfld.long 0xC 2.--3. "GHWPARAMS3_3_2,`DWC_USB3_HSPHY_INTERFACE" "0,1,2,3" newline bitfld.long 0xC 0.--1. "GHWPARAMS3_1_0,`DWC_USB3_SSPHY_INTERFACE" "0,1,2,3" line.long 0x10 "GHWPARAMS4,Global Hardware Parameters Register 4" hexmask.long.byte 0x10 28.--31. 1. "GHWPARAMS4_31_28,`DWC_USB3_BMU_LSP_DEPTH" newline hexmask.long.byte 0x10 24.--27. 1. "GHWPARAMS4_27_24,`DWC_USB3_BMU_PTL_DEPTH-1" newline bitfld.long 0x10 23. "GHWPARAMS4_23,`DWC_USB3_EN_ISOC_SUPT" "0,1" newline bitfld.long 0x10 21. "GHWPARAMS4_21,`DWC_USB3_EXT_BUFF_CONTROL" "0,1" newline hexmask.long.byte 0x10 17.--20. 1. "GHWPARAMS4_20_17,`DWC_USB3_NUM_SS_USB_INSTANCES" newline hexmask.long.byte 0x10 13.--16. 1. "GHWPARAMS4_16_13,`DWC_USB3_HIBER_SCRATCHBUFS Number of external scratchpad buffers the core requires to save its internal state in the device mode" newline bitfld.long 0x10 12. "GHWPARAMS4_12,`DWC_USB3_EN_SSIC - 1'b0: if DWC_USB3_EN_SSIC == 0 - 1'b1: if DWC_USB3_EN_SSIC != 0 Note: When the DWC_USB3_NUM_SSIC_PORTS parameter is set to zero this bit is Reserved" "0: if DWC_USB3_EN_SSIC == 0,1: if DWC_USB3_EN_SSIC != 0 Note: When the.." newline bitfld.long 0x10 11. "GHWPARAMS4_11,`DWC_USB3_SSIC_NON_SNPS_MPHY This field indicates whether M-PHY or a third-party M-PHY is used with SSIC ports" "0,1" newline bitfld.long 0x10 9.--10. "GHWPARAMS4_10_9,`DWC_USB3_SSIC_GEAR This field indicates DWC_USB3_SSIC_GEAR parameter value chosen by the user - 2'b00: Reserved - 2'b01: HS-G1 - 2'b10: HS-G2 - 2'b11: HS-G3 Note: When the DWC_USB3_NUM_SSIC_PORTS parameter is set to zero this field is.." "0: Reserved,1: HS-G1,2: HS-G2,3: HS-G3 Note: When the DWC_USB3_NUM_SSIC_PORTS.." newline bitfld.long 0x10 7.--8. "GHWPARAMS4_8_7,`DWC_USB3_NUM_SSIC_NUM_LANE This bit indicates `DWC_USB3_SSIC_NUM_LANE parameter value chosen by the user - 2'b00: 4 lane - 2'b01: 1 lane - 2'b10: 2 lane - 2'b11: Reserved Note: When the DWC_USB3_NUM_SSIC_PORTS parameter is set to zero .." "?,?,?,3: Reserved Note: When the DWC_USB3_NUM_SSIC_PORTS.." newline hexmask.long.byte 0x10 0.--5. 1. "GHWPARAMS4_5_0,DWC_USB3_CACHE_TRBS_PER_TRANSFER" line.long 0x14 "GHWPARAMS5,Global Hardware Parameters Register 5" hexmask.long.byte 0x14 22.--27. 1. "GHWPARAMS5_27_22,`DWC_USB3_DFQ_FIFO_DEPTH" newline hexmask.long.byte 0x14 16.--21. 1. "GHWPARAMS5_21_16,`DWC_USB3_DWQ_FIFO_DEPTH" newline hexmask.long.byte 0x14 10.--15. 1. "GHWPARAMS5_15_10,`DWC_USB3_TXQ_FIFO_DEPTH" newline hexmask.long.byte 0x14 4.--9. 1. "GHWPARAMS5_9_4,`DWC_USB3_RXQ_FIFO_DEPTH" newline hexmask.long.byte 0x14 0.--3. 1. "GHWPARAMS5_3_0,`DWC_USB3_BMU_BUSGM_DEPTH" line.long 0x18 "GHWPARAMS6,Global Hardware Parameters Register 6" hexmask.long.word 0x18 16.--31. 1. "GHWPARAMS6_31_16,`DWC_USB3_RAM0_DEPTH" newline bitfld.long 0x18 15. "BUSFLTRSSUPPORT,`DWC_USB3_EN_BUS_FILTERS" "0,1" newline bitfld.long 0x18 14. "BCSupport,`DWC_USB3_EN_BC" "0,1" newline bitfld.long 0x18 7. "GHWPARAMS6_7,`DWC_USB3_EN_FPGA" "0,1" newline bitfld.long 0x18 6. "GHWPARAMS6_6,`DWC_USB3_EN_DBG_PORTS" "0,1" newline hexmask.long.byte 0x18 0.--5. 1. "GHWPARAMS6_5_0,`DWC_USB3_PSQ_FIFO_DEPTH" line.long 0x1C "GHWPARAMS7,Global Hardware Parameters Register 7" hexmask.long.word 0x1C 16.--31. 1. "GHWPARAMS7_31_16,`DWC_USB3_RAM2_DEPTH" newline hexmask.long.word 0x1C 0.--15. 1. "GHWPARAMS7_15_0,`DWC_USB3_RAM1_DEPTH" group.long 0xC180++0xF line.long 0x0 "GPRTBIMAP_HSLO,Global High-Speed Port to Bus Instance Mapping Register - Low" hexmask.long.byte 0x0 28.--31. 1. "BINUM8,HS USB Instance Number for Port 8. Application-programmable ID field." newline hexmask.long.byte 0x0 24.--27. 1. "BINUM7,HS USB Instance Number for Port 7. Application-programmable ID field." newline hexmask.long.byte 0x0 20.--23. 1. "BINUM6,USB Instance Number for Port 6. Application-programmable ID field." newline hexmask.long.byte 0x0 16.--19. 1. "BINUM5,HS USB Instance Number for Port 5. Application-programmable ID field." newline hexmask.long.byte 0x0 12.--15. 1. "BINUM4,HS USB Instance Number for Port 4. Application-programmable ID field." newline hexmask.long.byte 0x0 8.--11. 1. "BINUM3,HS USB Instance Number for Port 3. Application-programmable ID field." newline hexmask.long.byte 0x0 4.--7. 1. "BINUM2,HS USB Instance Number for Port 2. Application-programmable ID field." newline hexmask.long.byte 0x0 0.--3. 1. "BINUM1,HS USB Instance Number for Port 1. Application-programmable ID field." line.long 0x4 "GPRTBIMAP_HSHI,Global High-Speed Port to Bus Instance Mapping Register - High" hexmask.long.byte 0x4 24.--27. 1. "BINUM15,HS USB Instance Number for Port 15. Application-programmable ID field." newline hexmask.long.byte 0x4 20.--23. 1. "BINUM14,HS USB Instance Number for Port 14. Application-programmable ID field." newline hexmask.long.byte 0x4 16.--19. 1. "BINUM13,HS USB Instance Number for Port 13. Application-programmable ID field." newline hexmask.long.byte 0x4 12.--15. 1. "BINUM12,HS USB Instance Number for Port 12. Application-programmable ID field." newline hexmask.long.byte 0x4 8.--11. 1. "BINUM11,HS USB Instance Number for 11. Application-programmable ID field." newline hexmask.long.byte 0x4 4.--7. 1. "BINUM10,HS USB Instance Number for Port 10. Application-programmable ID field." newline hexmask.long.byte 0x4 0.--3. 1. "BINUM9,HS USB Instance Number for Port 9. Application-programmable ID field." line.long 0x8 "GPRTBIMAP_FSLO,Global Full-Speed Port to Bus Instance Mapping Register - Low" hexmask.long.byte 0x8 28.--31. 1. "BINUM8,FS USB Instance Number for Port 8. Application-programmable ID field." newline hexmask.long.byte 0x8 24.--27. 1. "BINUM7,FS USB Instance Number for Port 7. Application-programmable ID field." newline hexmask.long.byte 0x8 20.--23. 1. "BINUM6,FS USB Instance Number for Port 6. Application-programmable ID field." newline hexmask.long.byte 0x8 16.--19. 1. "BINUM5,FS USB Instance Number for Port 5. Application-programmable ID field." newline hexmask.long.byte 0x8 12.--15. 1. "BINUM4,FS USB Instance Number for Port 4. Application-programmable ID field." newline hexmask.long.byte 0x8 8.--11. 1. "BINUM3,FS USB Instance Number for Port 3. Application-programmable ID field." newline hexmask.long.byte 0x8 4.--7. 1. "BINUM2,FS USB Instance Number for Port 2. Application-programmable ID field." newline hexmask.long.byte 0x8 0.--3. 1. "BINUM1,FS USB Instance Number for Port 1. Application-programmable ID field." line.long 0xC "GPRTBIMAP_FSHI,Global Full-Speed Port to Bus Instance Mapping Register - High" hexmask.long.byte 0xC 24.--27. 1. "BINUM15,FS USB Instance Number for Port 15. Application-programmable ID field" newline hexmask.long.byte 0xC 20.--23. 1. "BINUM14,FS USB Instance Number for Port 14. Application-programmable ID field" newline hexmask.long.byte 0xC 16.--19. 1. "BINUM13,FS USB Instance Number for Port 13. Application-programmable ID field" newline hexmask.long.byte 0xC 12.--15. 1. "BINUM12,FS USB Instance Number for Port 12. Application-programmable ID field" newline hexmask.long.byte 0xC 8.--11. 1. "BINUM11,FS USB Instance Number for Port 11. Application-programmable ID field" newline hexmask.long.byte 0xC 4.--7. 1. "BINUM10,FS USB Instance Number for Port 10. Application-programmable ID field" newline hexmask.long.byte 0xC 0.--3. 1. "BINUM9,FS USB Instance Number for Port 9. Application-programmable ID field." group.long 0xC194++0xB line.long 0x0 "GERRINJCTL_1,Global Error Injection 1 Control Register" line.long 0x4 "GERRINJCTL_2,Global Error Injection 2 Control Register" line.long 0x8 "GUCTL2,Global User Control Register 2" hexmask.long.byte 0x8 19.--25. 1. "EN_HP_PM_TIMER,This register field is used to set new HP and PM timers" newline hexmask.long.byte 0x8 15.--18. 1. "NOLOWPWRDUR,No Low Power Duration" newline bitfld.long 0x8 14. "RST_ACTBITLATER,Enable clearing of the command active bit for the ENDXFER command after the command execution is completed" "0,1" newline bitfld.long 0x8 12. "ENABLEEPCACHEEVICT,Enable Evicting Endpoint Cache after Flow Control for bulk endpoints" "0,1" newline bitfld.long 0x8 11. "DISABLECFC,Disable xHCI Errata Feature Contiguous Frame ID Capability" "0,1" newline hexmask.long.byte 0x8 5.--10. 1. "RXPINGDURATION,Receive Ping Maximum Duration" newline hexmask.long.byte 0x8 0.--4. 1. "TXPINGDURATION,Transmit Ping Maximum Duration" group.long 0xC200++0x3 line.long 0x0 "GUSB2PHYCFG,Global USB2 PHY Configuration Register" bitfld.long 0x0 31. "PHYSOFTRST,UTMI PHY Soft Reset" "0,1" newline bitfld.long 0x0 30. "U2_FREECLK_EXISTS,U2_FREECLK_EXISTS" "0,1" newline bitfld.long 0x0 29. "ULPI_LPM_WITH_OPMODE_CHK,Support the LPM over ULPI without NOPID token to the ULPI PHY" "0,1" newline rbitfld.long 0x0 27.--28. "HSIC_CON_WIDTH_ADJ,This bit is used in the HSIC device mode of operation." "0,1,2,3" newline rbitfld.long 0x0 26. "INV_SEL_HSIC,The application driver uses this bit to control the HSIC enable/disable function." "0,1" newline bitfld.long 0x0 25. "OVRD_FSLS_DISC_TIME,Overriding the FS/LS Disconnect Time" "0,1" newline bitfld.long 0x0 22.--24. "LSTRD,LS Turnaround Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 19.--21. "LSIPD,LS Inter-Packet Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 18. "ULPIEXTVBUSINDIACTOR,ULPI External VBUS Indicator" "0,1" newline bitfld.long 0x0 17. "ULPIEXTVBUSDRV,ULPI External VBUS Drive" "0,1" newline bitfld.long 0x0 15. "ULPIAUTORES,ULPI Auto Resume" "0,1" newline hexmask.long.byte 0x0 10.--13. 1. "USBTRDTIM,USB 2.0 Turnaround Time" newline bitfld.long 0x0 9. "XCVRDLY,Transceiver Delay" "0,1" newline bitfld.long 0x0 8. "ENBLSLPM,Enable utmi_sleep_n and utmi_l1_suspend_" "0,1" newline bitfld.long 0x0 7. "PHYSEL,USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select" "0,1" newline bitfld.long 0x0 6. "SUSPENDUSB20,Suspend USB2.0 HS/FS/LS PHY" "0,1" newline rbitfld.long 0x0 5. "FSINTF,Full-Speed Serial Interface Select" "0,1" newline rbitfld.long 0x0 4. "ULPI_UTMI_Sel,ULPI or UTMI+ Select" "0,1" newline bitfld.long 0x0 3. "PHYIF,PHY Interface" "0,1" newline bitfld.long 0x0 0.--2. "TOutCal,HS/FS Timeout Calibration" "0,1,2,3,4,5,6,7" group.long 0xC2C0++0x3 line.long 0x0 "GUSB3PIPECTL,Global USB 3.0 PIPE Control Register" bitfld.long 0x0 31. "PHYSoftRst,USB3 PHY Soft Reset" "0,1" newline bitfld.long 0x0 30. "HstPrtCmpl,This feature tests the PIPE PHY compliance patterns without having to have a test fixture on the USB 3" "0,1" newline bitfld.long 0x0 29. "U2P3ok,P3 OK for U2" "0,1" newline bitfld.long 0x0 28. "DisRxDetP3,Disabled Receiver Detection in P3" "0,1" newline bitfld.long 0x0 27. "Ux_exit_in_Px,Ux Exit in Px" "0,1" newline bitfld.long 0x0 26. "ping_enhancement_en,Ping Enhancement Enable" "0,1" newline bitfld.long 0x0 25. "u1u2exitfail_to_recov,U1U2exitfail to Recovery" "0,1" newline bitfld.long 0x0 24. "request_p1p2p3,Always Request P1/P2/P3 for U1/U2/U3" "0,1" newline bitfld.long 0x0 23. "StartRxDetU3RxDet,Start Receiver Detection in U3/Rx.Detect" "0,1" newline bitfld.long 0x0 22. "DisRxDetU3RxDet,Disable Receiver Detection in U3/Rx.Detect" "0,1" newline bitfld.long 0x0 19.--21. "DelayP1P2P3,Delay P1P2P3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 18. "DELAYP1TRANS,Delay PHY Power" "0,1" newline bitfld.long 0x0 17. "SUSPENDENABLE,Suspend USB3 SS PHY" "0,1" newline rbitfld.long 0x0 15.--16. "DATWIDTH,PIPE Data Width" "0,1,2,3" newline bitfld.long 0x0 14. "AbortRxDetInU2,Abort Rx Detect in U2" "0,1" newline bitfld.long 0x0 13. "SkipRxDet,Skip Rx Detect" "0,1" newline bitfld.long 0x0 12. "LFPSP0Algn,LFPS P0 Align" "0,1" newline bitfld.long 0x0 11. "P3P2TranOK,P3 P2 Transitions OK" "0,1" newline bitfld.long 0x0 10. "P3ExSigP2,P3 Exit Signal in P2" "0,1" newline bitfld.long 0x0 9. "LFPSFILTER,LFPS Filter" "0,1" newline bitfld.long 0x0 8. "RX_DETECT_to_Polling_LFPS_Control,RX_DETECT to Polling" "0,1" newline bitfld.long 0x0 7. "SSICEn,USB3 SSIC Enable" "0,1" newline bitfld.long 0x0 6. "TX_SWING,Tx Swing" "0,1" newline bitfld.long 0x0 3.--5. "TX_MARGIN,Tx Margin [2:0]" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 1.--2. "SS_TX_DE_EMPHASIS,Tx De emphasis" "0,1,2,3" newline bitfld.long 0x0 0. "ELASTIC_BUFFER_MODE,Elastic Buffer Mode" "0,1" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC300)++0x3 line.long 0x0 "GTXFIFOSIZ[$1],Global Transmit FIFO Size Register" hexmask.long.word 0x0 16.--31. 1. "TXFSTADDR_N,Transmit FIFOn RAM Start Address" newline hexmask.long.word 0x0 0.--15. 1. "TXFDEP_N,TXFIFO depth" repeat.end repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC380)++0x3 line.long 0x0 "GRXFIFOSIZ[$1],Global Receive FIFO Size Register" hexmask.long.word 0x0 16.--31. 1. "RXFSTADDR_N,RxFIFOn RAM Start Address" newline hexmask.long.word 0x0 0.--15. 1. "RXFDEP_N,RxFIFO Depth" repeat.end group.long 0xC400++0xF line.long 0x0 "GEVNTADRLO,Global Event Buffer Address Low Register" hexmask.long 0x0 0.--31. 1. "EVNTADRLO,Event Buffer Address" line.long 0x4 "GEVNTADRHI,Global Event Buffer Address High Register" hexmask.long 0x4 0.--31. 1. "EVNTADRHI,Event Buffer Address" line.long 0x8 "GEVNTSIZ,Global Event Buffer Size Register" bitfld.long 0x8 31. "EVNTINTRPTMASK,Event Interrupt Mask." "0,1" newline hexmask.long.word 0x8 0.--15. 1. "EVENTSIZ,Event Buffer Size in Bytes" line.long 0xC "GEVNTCOUNT,Global Event Buffer Count Register" bitfld.long 0xC 31. "EVNT_HANDLER_BUSY,Event Handler Busy" "0,1" newline hexmask.long.word 0xC 0.--15. 1. "EVNTCOUNT,Event Count" rgroup.long 0xC600++0x3 line.long 0x0 "GHWPARAMS8,Global Hardware Parameters Register 8" hexmask.long 0x0 0.--31. 1. "GHWPARAMS8_32_0,`DWC_USB3_DCACHE_DEPTH_INFO" group.long 0xC60C++0x7 line.long 0x0 "GUCTL3,Global User Control Register 3" bitfld.long 0x0 16. "SCH_PING_EARLY,Enable SuperSpeed Ping Transaction Packet scheduling early in the microframe" "0,1" line.long 0x4 "GTXFIFOPRIDEV,Global Device TX FIFO DMA Priority Register" hexmask.long.byte 0x4 0.--7. 1. "gtxfifopridev,Device TxFIFO priority" group.long 0xC618++0xF line.long 0x0 "GTXFIFOPRIHST,Global Host TX FIFO DMA Priority Register" hexmask.long.byte 0x0 0.--3. 1. "gtxfifoprihst,Host TxFIFO priority" line.long 0x4 "GRXFIFOPRIHST,Global Host RX FIFO DMA Priority Register" bitfld.long 0x4 0.--2. "grxfifoprihst,Host RxFIFO priority" "0,1,2,3,4,5,6,7" line.long 0x8 "GFIFOPRIDBC,Global Host Debug Capability DMA Priority Register" bitfld.long 0x8 0.--1. "gfifopridbc,Host DbC DMA priority" "0,1,2,3" line.long 0xC "GDMAHLRATIO,Global Host FIFO DMA High-Low Priority Ratio Register" hexmask.long.byte 0xC 8.--12. 1. "hstrxfifo,Host RXFIFO DMA High-Low Priority" newline hexmask.long.byte 0xC 0.--4. 1. "hsttxfifo,Host TXFIFO DMA High-Low Priority" group.long 0xC630++0x3 line.long 0x0 "GFLADJ,Global Frame Length Adjustment Register" bitfld.long 0x0 31. "GFLADJ_REFCLK_240MHZDECR_PLS1,This field indicates that the decrement value that the controller applies for each ref_clk must be GFLADJ_REFCLK_240MHZ_DECR and GFLADJ_REFCLK_240MHZ_DECR +1 alternatively on each ref_clk" "0,1" newline hexmask.long.byte 0x0 24.--30. 1. "GFLADJ_REFCLK_240MHZ_DECR,This field indicates the decrement value that the controller applies for each ref_clk in order to derive a frame timer in terms of a 240-MHz clock" newline bitfld.long 0x0 23. "GFLADJ_REFCLK_LPM_SEL,This bit enables the functionality of running SOF/ITP counters on the ref_clk" "0,1" newline hexmask.long.word 0x0 8.--21. 1. "GFLADJ_REFCLK_FLADJ,This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk" newline bitfld.long 0x0 7. "GFLADJ_30MHZ_SDBND_SEL,This field selects whether to use the input signal fladj_30mhz_reg or the GFLADJ" "0,1" newline hexmask.long.byte 0x0 0.--5. 1. "GFLADJ_30MHZ,This field indicates the value that is used for frame length adjustment instead of considering from the sideband input signal fladj_30mhz_reg" group.long 0xC640++0x3 line.long 0x0 "GUSB2RHBCTL,Global USB 2.0 Root Hub Control Register" hexmask.long.byte 0x0 0.--3. 1. "OVRD_L1TIMEOUT,Overriding Driver Programmed L1Timeout Value" group.long 0xC700++0x17 line.long 0x0 "DCFG,Device Configuration Register" bitfld.long 0x0 23. "IgnStrmPP,Ignore Stream PP" "0,1" newline bitfld.long 0x0 22. "LPMCAP,LPM Capable" "0,1" newline hexmask.long.byte 0x0 17.--21. 1. "NUMP,Number of Receive Buffers" newline hexmask.long.byte 0x0 12.--16. 1. "INTRNUM,Interrupt Number" newline hexmask.long.byte 0x0 3.--9. 1. "DEVADDR,Device Address" newline bitfld.long 0x0 0.--2. "DEVSPD,Device Speed" "0: no description available,1: no description available,?,?,4: no description available,?,?,?" line.long 0x4 "DCTL,Device Control Register" bitfld.long 0x4 31. "RUN_STOP,Run/Stop" "0,1" newline bitfld.long 0x4 30. "CSFTRST,Core Soft Reset" "0,1" newline hexmask.long.byte 0x4 24.--28. 1. "HIRDTHRES,HIRD Threshold" newline hexmask.long.byte 0x4 20.--23. 1. "LPM_NYET_thres,LPM NYET Threshold" newline bitfld.long 0x4 19. "KeepConnect,Keep Connect" "0,1" newline bitfld.long 0x4 18. "L1HibernationEn,L1 Hibernation Enable" "0,1" newline bitfld.long 0x4 17. "CRS,Controller Restore State" "0,1" newline bitfld.long 0x4 16. "CSS,Controller Save State" "0,1" newline bitfld.long 0x4 12. "INITU2ENA,Initiate U2 Enable" "0,1" newline bitfld.long 0x4 11. "ACCEPTU2ENA,Accept U2 Enable" "0,1" newline bitfld.long 0x4 10. "INITU1ENA,Initiate U1 Enable" "0,1" newline bitfld.long 0x4 9. "ACCEPTU1ENA,Accept U1 Enable" "0,1" newline hexmask.long.byte 0x4 5.--8. 1. "ULSTCHNGREQ,Software writes this field to issue a USB/Link state change request" newline hexmask.long.byte 0x4 1.--4. 1. "TSTCTL,Test Control" line.long 0x8 "DEVTEN,Device Event Enable Register" rbitfld.long 0x8 16. "ECCERREN,ECC Error Enable" "0,1" newline bitfld.long 0x8 14. "L1WKUPEVTEN,L1 Resume Detected Event Enable" "0,1" newline bitfld.long 0x8 12. "VENDEVTSTRCVDEN,Vendor Device Test LMP Received Event" "0,1" newline bitfld.long 0x8 9. "ERRTICERREVTEN,Erratic Error Event Enable" "0,1" newline bitfld.long 0x8 8. "L1SUSPEN,L1 Suspend Event Enable" "0,1" newline bitfld.long 0x8 7. "SOFTEVTEN,Start of (u)frame" "0,1" newline bitfld.long 0x8 6. "U3L2L1SuspEn,U3/L2 or U3/L2L1 Suspend Event Enable" "0,1" newline bitfld.long 0x8 5. "HibernationReqEvtEn,Hibernation Request Event" "0,1" newline bitfld.long 0x8 4. "WKUPEVTEN,U3/L2 or U3/L2L1 Resume Detected Event Enable" "0,1" newline bitfld.long 0x8 3. "ULSTCNGEN,USB/Link State Change Event Enable" "0,1" newline bitfld.long 0x8 2. "CONNECTDONEEVTEN,Connection Done Enable" "0,1" newline bitfld.long 0x8 1. "USBRSTEVTEN,USB Reset Enable" "0,1" newline bitfld.long 0x8 0. "DISSCONNEVTEN,Disconnect Detected Event Enable" "0,1" line.long 0xC "DSTS,Device Status Register" rbitfld.long 0xC 29. "DCNRD,Device Controller Not Ready" "0,1" newline bitfld.long 0xC 28. "SRE,Save Restore Error" "0,1" newline rbitfld.long 0xC 25. "RSS,Restore State Status" "0,1" newline rbitfld.long 0xC 24. "SSS,Save State Status" "0,1" newline rbitfld.long 0xC 23. "COREIDLE,Core Idle" "0,1" newline rbitfld.long 0xC 22. "DEVCTRLHLT,Device Controller Halted" "0,1" newline hexmask.long.byte 0xC 18.--21. 1. "USBLNKST,USB/Link State" newline rbitfld.long 0xC 17. "RXFIFOEMPTY,RxFIFO Empty." "0,1" newline hexmask.long.word 0xC 3.--16. 1. "SOFFN,Frame/Microframe Number of the Received SOF" newline rbitfld.long 0xC 0.--2. "CONNECTSPD,Connected Speed" "0: no description available,1: no description available,?,?,4: no description available,?,?,?" line.long 0x10 "DGCMDPAR,Device Generic Command Parameter Register" hexmask.long 0x10 0.--31. 1. "PARAMETER,PARAMETER" line.long 0x14 "DGCMD,Device Generic Command Register" hexmask.long.byte 0x14 12.--15. 1. "CMDSTATUS,Command Status" newline bitfld.long 0x14 10. "CMDACT,Command Active" "0,1" newline bitfld.long 0x14 8. "CMDIOC,Command Interrupt on Complete" "0,1" newline hexmask.long.byte 0x14 0.--7. 1. "CMDTYP,Generic Command Type" group.long 0xC720++0x3 line.long 0x0 "DALEPENA,Device Active USB Endpoint Enable Register" hexmask.long 0x0 0.--31. 1. "USBACTEP,USB active endpoints This bit indicates if a USB endpoint is active in the current configuration and interface" group.long 0xC800++0xF line.long 0x0 "DEPCMDPAR2,Device Physical Endpoint-n Command Parameter 2 Register" hexmask.long 0x0 0.--31. 1. "PARAMETER,PARAMETER" line.long 0x4 "DEPCMDPAR1,Device Physical Endpoint-n Command Parameter 1 Register" hexmask.long 0x4 0.--31. 1. "PARAMETER,PARAMETER" line.long 0x8 "DEPCMDPAR0,Device Physical Endpoint-n Command Parameter 0 Register" hexmask.long 0x8 0.--31. 1. "PARAMETER,PARAMETER" line.long 0xC "DEPCMD,Device Physical Endpoint-n Command Register" hexmask.long.word 0xC 16.--31. 1. "COMMANDPARAM,Command Parameters or Event Parameters Command Parameters" newline hexmask.long.byte 0xC 12.--15. 1. "CMDSTATUS,Command Completion Status" newline bitfld.long 0xC 11. "HIPRI_FORCERM,High Priority/ForceRM" "0,1" newline bitfld.long 0xC 10. "CMDACT,Command Active" "0,1" newline bitfld.long 0xC 8. "CMDIOC,CMDIOC Command Interrupt on Complete" "0,1" newline hexmask.long.byte 0xC 0.--3. 1. "CMDTYP,Command Type" group.long 0xCA00++0x3 line.long 0x0 "DEV_IMOD,Device Interrupt Moderation Register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_IMODC,Interrupt Moderation Down Counter" newline hexmask.long.word 0x0 0.--15. 1. "DEVICE_IMODI,Moderation Interval" group.long 0xCC30++0x3 line.long 0x0 "BCFG,BC Configuration Register" bitfld.long 0x0 1. "IDDIG_SEL,IDDIG Select" "0,1" newline bitfld.long 0x0 0. "CHIRP_EN,Chirp Enable" "0,1" group.long 0xCC38++0x7 line.long 0x0 "BCEVT,BC Event Register" bitfld.long 0x0 24. "MV_ChngEvnt,Multi-Valued Input Changed Event" "0,1" newline hexmask.long.byte 0x0 0.--4. 1. "MultValIdBc,Multi Valued ID pin" line.long 0x4 "BCEVTEN,BC Event Enable Register" bitfld.long 0x4 24. "MV_ChngEvntEna,Multi-Valued Input changed Event Enable" "0,1" group.long 0xD000++0x3 line.long 0x0 "LU1LFPSRXTIM0,U1/U2 LFPS Rx Timer Register" hexmask.long.byte 0x0 8.--15. 1. "U1U2_LFPS_EXIT_RX_CLK,Programmable U1U2 LFPS EXIT RX CLKS" newline hexmask.long.byte 0x0 0.--7. 1. "U1U2_EXIT_RSP_RX_CLK,Programmable U1U2 EXIT RESP RX CLKS" group.long 0xD020++0xB line.long 0x0 "LINK_SETTINGS0,Link Setting Register" bitfld.long 0x0 28.--30. "U1_RESID_TIMER_US,Programmable U1 MIN RESIDENCY TIMER" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "PM_LC_TIMER_US,Programmable PM_LC_TIMER" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 20.--23. 1. "PM_ENTRY_TIMER_US,Programmable PM_ENTRY_TIMER" line.long 0x4 "LLUCTL0,Link User Control Register" bitfld.long 0x4 29. "SUPPORT_P4_PG,PHY P4 Power Gate Mode (PG) Enabled" "0,1" newline bitfld.long 0x4 28. "SUPPORT_P4,Support PHY P3.CPM and P4 Power States" "0,1" newline bitfld.long 0x4 23. "DISRXDET_LTSSM_TIMER_OVRRD,When DisRxDetU3RxDet is asserted in Polling or U1 the timeout expires immediately." "0,1" newline bitfld.long 0x4 12. "U2P3CPMok,P3CPM OK for U2/SSInactive" "0,1" newline bitfld.long 0x4 11. "EN_RESET_PIPE_AFTER_PHY_MUX,The controller issues USB 3.0 PHY reset after DisRxDetU3RxDet is de-asserted." "0,1" newline bitfld.long 0x4 7. "MASK_PIPE_RESET,Mask Pipe Reset" "0,1" newline bitfld.long 0x4 5. "NO_UX_EXIT_P0_TRANS,Link LTSSM detects Ux_exit LFPS when P0 transition is on-going by default" "0,1" line.long 0x8 "LPTMDPDELAY0,Link Datapath Delay Register" hexmask.long.word 0x8 10.--21. 1. "P3CPMP4_RESIDENCY,Programmable PM_ENTRY_TIMER" group.long 0xD800++0x3 line.long 0x0 "BU3RHBDBG,U3 Root Hub Debug Register" bitfld.long 0x0 3. "TPCFG_TOUT_CTRL,This bit controls the USB 3" "0,1" rgroup.long 0xD850++0xB line.long 0x0 "BRSERRCNT,Block RAM Single Bit Error Count Register" hexmask.long.byte 0x0 16.--23. 1. "RAM2SERRCNT,RAM2 Single bit Error Count" newline hexmask.long.byte 0x0 8.--15. 1. "RAM1SERRCNT,RAM1 Single bit Error Count" newline hexmask.long.byte 0x0 0.--7. 1. "RAM0SERRCNT,RAM0 Single bit Error Count" line.long 0x4 "BRMERRCNT,Block RAM Multiple Bit Error Count Register" hexmask.long.byte 0x4 16.--23. 1. "RAM2MERRCNT,RAM2 Multiple bit Error Count" newline hexmask.long.byte 0x4 8.--15. 1. "RAM1MERRCNT,RAM1 Multiple bit Error Count" newline hexmask.long.byte 0x4 0.--7. 1. "RAM0MERRCNT,RAM0 Multiple bit Error Count" line.long 0x8 "BRMECCERR,Block RAM ECC Error Vector Register" bitfld.long 0x8 7. "RAMSERR,RAM Single bit Error Status" "0,1" newline bitfld.long 0x8 6. "RAMMERR,RAM Multiple bit Error Status" "0,1" newline bitfld.long 0x8 3.--5. "RAMSERRVEC,RAM Single Error Vector" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0.--2. "RAMMERRVEC,RAM Multiple Error Vector" "0,1,2,3,4,5,6,7" group.long 0xD85C++0x3 line.long 0x0 "BRERRCTL,Block RAM ECC Error Control Register" bitfld.long 0x0 3. "ECCERRINJECT,This bit should be used for testing purposes only. 1: Inject ECC error 0: No ECC error injected" "0: No ECC error injected,1: Inject ECC error" newline bitfld.long 0x0 2. "ECCEN,ECC Enable (1) or Disable (0)" "0,1" newline bitfld.long 0x0 1. "RSERRCLR,RAM Single bit Error Clear" "0,1" newline bitfld.long 0x0 0. "RMERRCLR,RAM Multiple bit Error Clear" "0,1" rgroup.long 0xD860++0xB line.long 0x0 "BRAM0ADDRERR,Block RAM0 Address Error Register" hexmask.long.word 0x0 0.--15. 1. "RAM0ADDRLOC,RAM0 Address Location" line.long 0x4 "BRAM1ADDRERR,Block RAM1 Address Error Register" hexmask.long.word 0x4 0.--15. 1. "RAM1ADDRLOC,RAM1 Address Location" line.long 0x8 "BRAM2ADDRERR,Block RAM2 Address Error Register" hexmask.long.word 0x8 0.--15. 1. "RAM2ADDRLOC,RAM2 Address Location" tree.end tree "ENET_PHY" base ad:0x0 tree " (dwc_e16mp_phy_x1_ns)" base ad:0x4C800000 rgroup.word 0x0++0x1 line.word 0x0 "IDCODE_LO,Low 16 bits of IDCODE" hexmask.word 0x0 0.--15. 1. "VAL,VAL" rgroup.word 0x4++0x1 line.word 0x0 "IDCODE_HI,High 16 bits of IDCODE" hexmask.word 0x0 0.--15. 1. "VAL,VAL" group.word 0x8++0x1 line.word 0x0 "REFCLK_OVRD_IN,Override values for incoming REFCLK and RESET controls from ASIC" bitfld.word 0x0 12. "OVRD_EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 11. "REF_CLKDET_EN,Override value for ref_clkdet_en" "0,1" newline bitfld.word 0x0 10. "BG_EN,Override value for bg_en" "0,1" newline bitfld.word 0x0 7.--8. "VPH_NOMINAL,override value for vph_nominal" "0,1,2,3" newline bitfld.word 0x0 4.--6. "REF_CLK_RANGE,Override value for ref_range" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3. "REF_REPEAT_CLK_EN,Override value for ref_repeat_clk_en" "0,1" newline bitfld.word 0x0 2. "REF_USE_PAD,Override value for ref_use_pad" "0,1" newline bitfld.word 0x0 1. "REF_CLK_DIV2_EN,Override value for ref_clk_div2_en" "0,1" newline bitfld.word 0x0 0. "REF_CLK_EN,Override value for ref_clk_en" "0,1" group.word 0xC++0x1 line.word 0x0 "MPLLA_B_DIV_CLK_OVRD_IN,Override values for incoming MPLLA_B_DIV_CLK controls from ASIC" hexmask.word.byte 0x0 9.--15. 1. "MPLLB_DIV_MULTIPLIER,Override value for mpllb_div_multiplier" newline bitfld.word 0x0 8. "MPLLB_DIV_CLK_EN,Override value for mpllb_div_clk_en" "0,1" newline hexmask.word.byte 0x0 1.--7. 1. "MPLLA_DIV_MULTIPLIER,Override value for mplla_div_multiplier" newline bitfld.word 0x0 0. "MPLLA_DIV_CLK_EN,Override value for mplla_div_clk_en" "0,1" group.word 0x10++0x1 line.word 0x0 "SUP_OVRD_IN_0,Override values for support block ASIC inputs. register #0" bitfld.word 0x0 4. "RES_OVRD_EN,Enable override of res_req_in and res_ack_in" "0,1" newline bitfld.word 0x0 3. "RES_ACK_IN,Override value for res_ack_in" "0,1" newline bitfld.word 0x0 2. "RES_REQ_IN,Override value for res_req_in" "0,1" newline bitfld.word 0x0 1. "RTN_OVRD_EN,Enable override of rtune_req" "0,1" newline bitfld.word 0x0 0. "RTN_REQ,Override value for rtune_req" "0,1" group.word 0x14++0x1 line.word 0x0 "SUP_OVRD_IN_1,Override values for support block ASIC inputs. register #1" bitfld.word 0x0 15. "RX_TERM_OFST_OVRD_EN,Offset enable for RX termination" "0,1" newline hexmask.word.byte 0x0 10.--14. 1. "RX_TERM_OFST,Offset value for RX termination" newline bitfld.word 0x0 9. "TXUP_TERM_OFST_OVRD_EN,Offset enable for TXUP termination" "0,1" newline hexmask.word 0x0 0.--8. 1. "TXUP_TERM_OFST,Offset value for TXUP termination" group.word 0x18++0x1 line.word 0x0 "SUP_OVRD_IN_2,Override values for support block ASIC inputs. register #2" bitfld.word 0x0 9. "TXDN_TERM_OFST_OVRD_EN,Offset enable for TXDN termination" "0,1" newline hexmask.word 0x0 0.--8. 1. "TXDN_TERM_OFST,Offset value for TXDN termination" group.word 0x1C++0x1 line.word 0x0 "SUP_OVRD_OUT,Override values for support block ASIC outputs" bitfld.word 0x0 9. "BG_SUP_OVRD_EN,Enable override value for bg_sup_state signal" "0,1" newline bitfld.word 0x0 8. "BG_SUP_STATE_OVRD,Override value for bg_sup_state signal" "0,1" newline bitfld.word 0x0 7. "BG_LANE_OVRD_EN,Enable override value for bg_lane_state signal" "0,1" newline bitfld.word 0x0 6. "BG_LANE_STATE_OVRD,Override value for bg_lane_state signal" "0,1" newline bitfld.word 0x0 5. "OVRD_EN,Enable override values for all outputs controlled by this register" "0,1" newline bitfld.word 0x0 4. "MPLLB_STATE,Override value for mpllb_state output" "0,1" newline bitfld.word 0x0 3. "MPLLA_STATE,Override value for mplla_state output" "0,1" newline bitfld.word 0x0 2. "RES_ACK_OUT,Override value for res_ack_out output" "0,1" newline bitfld.word 0x0 1. "RES_REQ_OUT,Override value for res_req_out output" "0,1" newline bitfld.word 0x0 0. "RTN_ACK,Override value for rtune_ack output" "0,1" group.word 0x20++0x1 line.word 0x0 "LVL_OVRD_IN,Override values for level settings" bitfld.word 0x0 9. "TX_VBST_LVL_EN,Enable override value for tx_vboost_lvl" "0,1" newline bitfld.word 0x0 6.--8. "TX_VBST_LVL,Override value for tx_vboost_lvl" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 5. "RX_VREF_CTRL_EN,Enable override value for rx_vref_ctrl" "0,1" newline hexmask.word.byte 0x0 0.--4. 1. "RX_VREF_CTRL,Override value for rx_vref_ctrl" group.word 0x24++0x1 line.word 0x0 "DEBUG,Debug controls" bitfld.word 0x0 0.--2. "DTB_SEL,The lane DTB's are OR'd together with the support DTB signals selected with the below encodings" "0,1,2,3,4,5,6,7" rgroup.word 0x28++0x1 line.word 0x0 "MPLLA_B_DIV_CLK_ASIC_IN,Current values for incoming MPLLA_B_DIV_CLK controls from ASIC" hexmask.word.byte 0x0 9.--15. 1. "MPLLB_DIV_MULTIPLIER,Value from mpllb_div_multiplier" newline bitfld.word 0x0 8. "MPLLB_DIV_CLK_EN,Value from mpllb_div_clk_en" "0,1" newline hexmask.word.byte 0x0 1.--7. 1. "MPLLA_DIV_MULTIPLIER,Value from mplla_div_multiplier" newline bitfld.word 0x0 0. "MPLLA_DIV_CLK_EN,Value from mplla_div_clk_en" "0,1" rgroup.word 0x2C++0x1 line.word 0x0 "SUP_ASIC_IN,Current values for incoming SUP control signals from ASIC" bitfld.word 0x0 15. "BG_EN,Value from ASIC for bg_en" "0,1" newline bitfld.word 0x0 14. "MPLLB_STATE,Value to ASIC for mpllb_state_i" "0,1" newline bitfld.word 0x0 13. "MPLLA_STATE,Value to ASIC for mplla_state_i" "0,1" newline bitfld.word 0x0 12. "RES_ACK_OUT,Value to ASIC for res_ack_out_i" "0,1" newline bitfld.word 0x0 11. "RES_ACK_IN,Value from ASIC for res_req_in" "0,1" newline bitfld.word 0x0 10. "RES_REQ_OUT,Value to ASIC for res_ack_out_i" "0,1" newline bitfld.word 0x0 9. "RES_REQ_IN,Value from ASIC for res_req_in" "0,1" newline bitfld.word 0x0 8. "RTN_ACK,Value to ASIC for rtune_ack_i" "0,1" newline bitfld.word 0x0 7. "RTN_REQ,Value from ASIC for rtune_req" "0,1" newline bitfld.word 0x0 6. "TEST_POWERDOWN,Value from ASIC for test_powerdown" "0,1" newline bitfld.word 0x0 5. "TEST_BURNIN,Value from ASIC for test_burnin" "0,1" newline bitfld.word 0x0 4. "REF_USE_PAD,Value from ASIC for ref_use_pad" "0,1" newline bitfld.word 0x0 3. "REF_REPEAT_CLK_EN,Value from ASIC for ref_repeat_clk_en" "0,1" newline bitfld.word 0x0 2. "REF_CLK_DIV2_EN,Value from ASIC for ref_clk_div2_en" "0,1" newline bitfld.word 0x0 1. "REF_CLK_EN,Value from ASIC for ref_clk_en" "0,1" newline bitfld.word 0x0 0. "PHY_RESET,Value from ASIC for phy_reset" "0,1" rgroup.word 0x30++0x1 line.word 0x0 "LVL_ASIC_IN,Current values for incoming level controls from ASIC" hexmask.word.byte 0x0 10.--14. 1. "RX_TERM_OFST,Value from ASIC for" newline bitfld.word 0x0 9. "REF_CLKDET_EN,Value from ASIC for ref_clkdet_en" "0,1" newline bitfld.word 0x0 8. "REF_CLKDET_RESULT,Value from ASIC for ref_clkdet_result" "0,1" newline bitfld.word 0x0 5.--7. "TX_VBST_LVL,Value from ASIC for tx_vboost_lvl" "0,1,2,3,4,5,6,7" newline hexmask.word.byte 0x0 0.--4. 1. "RX_VREF_CTRL,Value from ASIC for rx_vref_ctrl" group.word 0x34++0x1 line.word 0x0 "SUP_OVRD_MISC,Override values for incoming SUP MISC BUS from ASIC" bitfld.word 0x0 8. "SUP_MISC_OVRD_EN,Override Enable for sup_misc[7:0]" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "SUP_MISC_OVRD_VAL,Override value for sup_misc[7:0]" group.word 0x38++0x1 line.word 0x0 "CLK_RST_BG_PU_T_0,BG Power UP Time Register #0" bitfld.word 0x0 9. "FST_BG_WAIT,Enable fast BG times (simulation only)" "0,1" newline hexmask.word 0x0 0.--8. 1. "BG_SUP_EN_T,Power up time (in ref_range cycles) for bandgap in SUP (spec >=5us)" group.word 0x3C++0x1 line.word 0x0 "CLK_RST_BG_PU_T_1,BG Power UP Time Register #1" hexmask.word 0x0 0.--8. 1. "BG_LANE_EN_T,Power up time (in ref_range cycles) for bandgap in LANE (spec >=5us)" group.word 0x40++0x1 line.word 0x0 "SUP_ANA_RTN_CTRL,RTUNE_CTRL" bitfld.word 0x0 7. "rt_en_frcon,Local rtune block enable control force rtune block on if asserted" "0,1" newline bitfld.word 0x0 6. "rt_ibias_1p5x,Increase bias current to 1." "0,1" newline bitfld.word 0x0 4.--5. "rt_dac_mode,Margin DAC mode control bits" "0,1,2,3" newline bitfld.word 0x0 3. "rt_dac_chop,[RT_DAC_CHOP RT_DAC_MODE]" "0,1" newline bitfld.word 0x0 2. "rt_atb,RTUNE ATB mode control." "0,1" newline bitfld.word 0x0 1. "rt_sel_atbp,RTUNE ATB input select" "0,1" newline bitfld.word 0x0 0. "rt_sel_atbf,RTUNE ATB input select" "0,1" group.word 0x44++0x1 line.word 0x0 "SUP_ANA_SWITCH_PWR_MEAS,SWITCH_PWR_MEAS" bitfld.word 0x0 7. "temp_meas,Measure bandgap's PNP diode voltage (temperature)" "0,1" newline bitfld.word 0x0 6. "atb_switch_6,Connect atb_s_p to atb_s_m if asserted" "0,1" newline bitfld.word 0x0 5. "atb_switch_5,Connect atb_s_p to vph/2 if asserted" "0,1" newline bitfld.word 0x0 4. "atb_switch_4,Connect atb_s_m to gd if asserted" "0,1" newline bitfld.word 0x0 3. "atb_switch_3,Connect atb_s_p to vp if asserted" "0,1" newline bitfld.word 0x0 2. "atb_switch_2,Connect atb_s_p to fastvreg_vref if asserted" "0,1" newline bitfld.word 0x0 1. "atb_switch_1,Connect atb_s_p to vph if bit 5 is not asserted" "0,1" newline bitfld.word 0x0 0. "atb_switch_0,Connect atb_s_p to slowvreg_vref if asserted" "0,1" group.word 0x48++0x1 line.word 0x0 "SUP_ANA_SWITCH_MISC_MEAS,SWITCH_MISC_MEAS" bitfld.word 0x0 5.--7. "vref_sel_slowreg_vph1p2,Sets value of slowreg_vref for VPH=1." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 2.--4. "vref_sel_slowreg_vph1p5,Sets value of slowreg_vref for VPH=1." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--1. "hyst_ref,Sets prescaler input buffer hysteresis" "0,1,2,3" group.word 0x4C++0x1 line.word 0x0 "SUP_ANA_BG,BG" bitfld.word 0x0 6.--7. "NC76,Reserved" "0,1,2,3" newline bitfld.word 0x0 5. "chop_en_int,Enable chopper clock for bandgap" "0,1" newline bitfld.word 0x0 3.--4. "vref_sel_fastreg_vph1p2,Sets value of fastreg_vref for VPH=1." "0,1,2,3" newline bitfld.word 0x0 1.--2. "vref_sel_fastreg_vph1p5,Sets value of fastreg_vref for VPH=1." "0,1,2,3" newline bitfld.word 0x0 0. "bypass_bg,Bypass bandgap with VP" "0,1" group.word 0x50++0x1 line.word 0x0 "RTN_DEBUG,Resistor tuning debug controls" bitfld.word 0x0 15. "TXUP_GO,Enable TxUP tune to continue in manual tune mode when TYPE is TxUP tune." "0,1" newline hexmask.word 0x0 5.--14. 1. "VALUE,Value to use when triggering SET_VAL field only the 6 LSB's are used when setting rx or tx cal values" newline bitfld.word 0x0 3.--4. "TYPE,Type of manual tuning or register read/write to execute 0 - ADC or read/write rt_value" "0: ADC,?,?,?" newline bitfld.word 0x0 2. "SET_VAL,Set value Write to a 1 to manually write the register specified by the TYPE field to the value in the VALUE field" "0,1" newline bitfld.word 0x0 1. "MAN_TN,Write to a 1 to do a manual tuning specified by TYPE field starting a manual tune while a tune is currently running can cause unpredictable results." "0,1" newline bitfld.word 0x0 0. "FLIP_CMP,Invert analog comparator output" "0,1" group.word 0x54++0x1 line.word 0x0 "RTN_CONFIG,Configure Rtune Operation" bitfld.word 0x0 0. "SKIP_RX_CAL,Skip calibration of rx resistor" "0,1" rgroup.word 0x58++0x1 line.word 0x0 "RTN_STAT,Resistor tuning register status" bitfld.word 0x0 10.--11. "DTB_RTN,DTB sampling for rtune" "0,1,2,3" newline hexmask.word 0x0 0.--9. 1. "STAT,Current value of the register specifed by the DEBUG." group.word 0x5C++0x1 line.word 0x0 "RTN_RX_SET_VAL,Set value of RX Resistor" hexmask.word.byte 0x0 0.--5. 1. "RX_SET_VAL,Set value of rx resistor Writing a value to this register will set the rx resistor value." group.word 0x60++0x1 line.word 0x0 "RTN_TXDN_SET_VAL,Set value of TX-DN Resistor" hexmask.word 0x0 0.--9. 1. "TXDN_SET_VAL,Set value of tx-dn resistor Writing a value to this register will set the tx-dn resistor value." group.word 0x64++0x1 line.word 0x0 "RTN_TXUP_SET_VAL,Set value of TX-UP Resistor" hexmask.word 0x0 0.--9. 1. "TXUP_SET_VAL,Set value of tx-up resistor Writing a value to this register will set the tx-up resistor value." rgroup.word 0x68++0x1 line.word 0x0 "RTN_RX_STAT,RX Resistor tuning register status" hexmask.word.byte 0x0 0.--5. 1. "RX_STAT,Current value of the rx resistor tuning register" rgroup.word 0x6C++0x1 line.word 0x0 "RTN_TXDN_STAT,TX-DN Resistor tuning register status" hexmask.word 0x0 0.--9. 1. "TXDN_STAT,Current value of the tx-dn resistor tuning register" rgroup.word 0x70++0x1 line.word 0x0 "RTN_TXUP_STAT,TX-UP Resistor tuning register status" hexmask.word 0x0 0.--9. 1. "TXUP_STAT,Current value of the tx-up resistor tuning register" group.word 0x74++0x1 line.word 0x0 "SUP_RTN_OVRD_OUT,Override value for RTUNE signals going to ANA" bitfld.word 0x0 14. "RTN_OVRD_EN,Override bit for rtune (rt_ana_* and term) outputs" "0,1" newline hexmask.word 0x0 4.--13. 1. "RTN_VALUE,Overrides the rt_ana_value[9:0] signal" newline bitfld.word 0x0 3. "RTN_EN,Overrides the rt_ana_en signal" "0,1" newline bitfld.word 0x0 1.--2. "RTN_MODE,Overrides the rt_ana_mode[1:0] signal" "0,1,2,3" newline bitfld.word 0x0 0. "RTN_CMP_RST,Overrides the rt_ana_comp_rst signal" "0,1" group.word 0x78++0x1 line.word 0x0 "SUP_RX_TERM_OVRD_OUT,Override value for RX termination signals going to ANA" hexmask.word.byte 0x0 0.--5. 1. "RX_TERM_VAL,Overrides the rx_ana_term_val[5:0] signal" rgroup.word 0x7C++0x1 line.word 0x0 "SUP_STAT,SUP input status register for SUP ANA outputs" bitfld.word 0x0 1. "REF_ANA_CLKDET_RESULT,Value from ANA for ref_ana_clkdet_result" "0,1" newline bitfld.word 0x0 0. "RT_ANA_CMP_RESULT,Value from ANA for rt_ana_comp_result" "0,1" group.word 0x80++0x1 line.word 0x0 "SUP_BG_OVRD_OUT,Override values for bandgap signals going to ANA" bitfld.word 0x0 2. "BG_OVRD_EN,Override bit for bandgap outputs" "0,1" newline bitfld.word 0x0 1. "BG_EN,Overrides the bg_ana_en signal" "0,1" newline bitfld.word 0x0 0. "BG_FST_START,Overrides the bg_ana_vref_fast_start signal" "0,1" rgroup.word 0x84++0x1 line.word 0x0 "FREQ_CNT_PEAK_ASIC_IN,Current values for incoming level controls from ASIC" hexmask.word.byte 0x0 8.--15. 1. "MPLLA_SSC_F_CNT_PEAK,Value from ASIC for MPLLA_SSC_FREQ_CNT_PEAK" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_SSC_F_CNT_PEAK,Value from ASIC for MPLLB_SSC_FREQ_CNT_PEAK" rgroup.word 0x88++0x1 line.word 0x0 "TXUP_TERM_OFST_ASIC_IN,Current values for incoming level controls from ASIC" hexmask.word 0x0 0.--8. 1. "TXUP_TERM_OFST,Value from ASIC for txup_term_offset" rgroup.word 0x8C++0x1 line.word 0x0 "TXDN_TERM_OFST_ASIC_IN,Current values for incoming level controls from ASIC" hexmask.word 0x0 0.--8. 1. "TXDN_TERM_OFST,Value from ASIC for txup_term_offset" rgroup.word 0x90++0x1 line.word 0x0 "MISC_ASIC_IN,Current values for incoming level controls from ASIC" bitfld.word 0x0 9. "TEST_FLYOVER_EN,Value from ASIC for test_flyover_en" "0,1" newline bitfld.word 0x0 8. "TEST_STOP_CLK_EN,Value from ASIC for test_stop_clk_en" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "SUP_MISC,Value from ASIC for sup_misc" group.word 0x94++0x1 line.word 0x0 "CMN_CTL,Common control register" bitfld.word 0x0 0. "PHY_FUNC_RST,Resets the PHY except registers in the Raw PCS common and always-on registers." "0,1" group.word 0x98++0x1 line.word 0x0 "L_FSM_OP_XTND,Lane FSM OP XTND control register" bitfld.word 0x0 0. "VAL,Required when accessing the analog CREGs in firmware to prevent timing violations across ANA-DIG interface." "0,1" group.word 0x9C++0x1 line.word 0x0 "TERM_OFST_OVRD_IN_0,Override values for incoming TX term offset" bitfld.word 0x0 9. "TXUP_TERM_OFST_OVRD_EN,Override Enable for txup_term_offset[8:0]" "0,1" newline hexmask.word 0x0 0.--8. 1. "TXUP_TERM_OFST_OVRD_VAL,Override value for txup_term_offset[8:0]" group.word 0xA0++0x1 line.word 0x0 "TERM_OFST_OVRD_IN_1,Override values for incoming TX/RX term offset" bitfld.word 0x0 15. "RX_TERM_OFST_OVRD_EN,Override enable for rx_term_offset[4:0]" "0,1" newline hexmask.word.byte 0x0 10.--14. 1. "RX_TERM_OFST_OVRD_VAL,Override value for rx_term_offset[4:0]" newline bitfld.word 0x0 9. "TXDN_TERM_OFST_OVRD_EN,Override enable for txdn_term_offset[8:0]" "0,1" newline hexmask.word 0x0 0.--8. 1. "TXDN_TERM_OFST_OVRD_VAL,Override value for txdn_term_offset[8:0]" group.word 0xA4++0x1 line.word 0x0 "CMN_CTL_1,Common control register 1" bitfld.word 0x0 5. "RTN_REQ_OVRD_EN,Override enable for rtune_req" "0,1" newline bitfld.word 0x0 4. "RTN_REQ_OVRD_VAL,Override value for rtune_req" "0,1" newline bitfld.word 0x0 3. "MPLLB_INIT_CAL_DIS_OVRD_EN,Override enable for mpllb_init_cal_disable" "0,1" newline bitfld.word 0x0 2. "MPLLB_INIT_CAL_DIS_OVRD_VAL,Override value for mpllb_init_cal_disable" "0,1" newline bitfld.word 0x0 1. "MPLLA_INIT_CAL_DIS_OVRD_EN,Override enable for mplla_init_cal_disable" "0,1" newline bitfld.word 0x0 0. "MPLLA_INIT_CAL_DIS_OVRD_VAL,Override value for mplla_init_cal_disable" "0,1" group.word 0xA8++0x1 line.word 0x0 "MPLL_OFF_T,Wait Time for turning MPLL off" hexmask.word.byte 0x0 0.--5. 1. "MPLLA_OFF_T,Wait Counter for turning off MPLL" group.word 0xAC++0x1 line.word 0x0 "ATE_ALU_CTRL,ATE ALU module Control Register" hexmask.word.byte 0x0 0.--3. 1. "ATE_ALU_OPCODE,OPCode for ATE ALU Module." group.word 0xB0++0x1 line.word 0x0 "ATE_ALU_ADDR,Address for Read and Write Command for ATE ALU Module" hexmask.word 0x0 0.--15. 1. "ADDR,Address for read and write command for ATE ALU module" group.word 0xB4++0x1 line.word 0x0 "ATE_ALU_DAT,Data for Write Command for ATE ALU Module" hexmask.word 0x0 0.--15. 1. "DAT,Data for read and write command for ATE ALU module" rgroup.word 0xB8++0x1 line.word 0x0 "ATE_ALU_FLAGS,Flags from ATE ALU Module" bitfld.word 0x0 0. "ATE_ALU_ACCUM_SIGN,Indicate the sign of the accumulator in ATE ALU" "0,1" rgroup.word 0xBC++0x1 line.word 0x0 "ATE_ALU_ACCUM,Stores the ATE ALU Accumulator result" hexmask.word 0x0 0.--15. 1. "VAL,Stores the ATE ALU Accumulator result" rgroup.word 0xC0++0x1 line.word 0x0 "MPLL_IN,Current values for incoming MPLL controls from PCS (pre-override Input Monitor)" bitfld.word 0x0 1. "MPLLB_INIT_CAL_DIS,Value from PCS for mpllb_init_cal_disable" "0,1" newline bitfld.word 0x0 0. "MPLLA_INIT_CAL_DIS,Value from PCS for mplla_init_cal_disable" "0,1" group.word 0xC4++0x1 line.word 0x0 "FW_PU_DN,Firmware Power-up Done Status" bitfld.word 0x0 0. "DN,Firmware Power-up Status for phy_reset and pg_reset" "0,1" group.word 0xC8++0x1 line.word 0x0 "MPLL_CLK_ASYNC_EN,Controls the MPLL Output Clocks Asynchronously" bitfld.word 0x0 1. "MPLLB_CLK_EN,Asynchronously enables the MPLLB output clocks." "0,1" newline bitfld.word 0x0 0. "MPLLA_CLK_EN,Asynchronously enables the MPLLA output clocks This can only be changed if the MPLLA is off to avoid the glitch on the MPLLA output clocks" "0,1" group.word 0xCC++0x1 line.word 0x0 "ATE_ALU_SPARE_0,Spare register #1 for ATE ALU operations" hexmask.word 0x0 0.--15. 1. "DAT,Spare for ATE ALU operations" group.word 0xD0++0x1 line.word 0x0 "ATE_ALU_SPARE_1,Spare register #2 for ATE ALU operations" hexmask.word 0x0 0.--15. 1. "DAT,Spare for ATE ALU operations" group.word 0xD4++0x1 line.word 0x0 "MPLL_STATE_OVRD_IN,Override for MPLLA/B State Outputs" bitfld.word 0x0 3. "MPLLB_STATE_OVRD_EN,Override enable for mpllb_state" "0,1" newline bitfld.word 0x0 2. "MPLLB_STATE_OVRD_VAL,Override value for mpllb_state" "0,1" newline bitfld.word 0x0 1. "MPLLA_STATE_OVRD_EN,Override enable for mplla_state" "0,1" newline bitfld.word 0x0 0. "MPLLA_STATE_OVRD_VAL,Override value for mplla_state" "0,1" group.word 0xD8++0x1 line.word 0x0 "AON_SRAM_PGATE_BL_EN,Enable SRAM bootloader on power-gated exit" bitfld.word 0x0 0. "SRAM_PGATE_BL_EN,Enable SRAM bootloader on power-gated exit." "0,1" group.word 0xDC++0x1 line.word 0x0 "AON_MPLL_CAL_BK_SEL_OVRD,Override the incoming mplla/b_recal_bank_sel input" bitfld.word 0x0 5. "MPLLB_CAL_BK_SEL_OVRD_EN,Enable override for mplla_cal_bank_sel" "0,1" newline bitfld.word 0x0 3.--4. "MPLLB_CAL_BK_SEL_OVRD_VAL,Override value for incoming input mpllb_recal_bank_sel" "0,1,2,3" newline bitfld.word 0x0 2. "MPLLA_CAL_BK_SEL_OVRD_EN,Enable override for mplla_recal_bank_sel" "0,1" newline bitfld.word 0x0 0.--1. "MPLLA_CAL_BK_SEL_OVRD_VAL,Override value for incoming input mplla_recal_bank_sel" "0,1,2,3" group.word 0xE0++0x1 line.word 0x0 "AON_PG_OVRD_IN,Override values for incoming power-gating signals" bitfld.word 0x0 7. "BG_EN_OVRD_EN,Override enable for bg_en." "0,1" newline bitfld.word 0x0 6. "BG_EN_OVRD_VAL,Override value for bg_en." "0,1" newline bitfld.word 0x0 5. "PG_MODE_EN_OVRD_EN,Override enable for pg_mode_en." "0,1" newline bitfld.word 0x0 4. "PG_MODE_EN_OVRD_VAL,Override value for pg_mode_en." "0,1" newline bitfld.word 0x0 3. "PG_RESET_OVRD_EN,Override enable for pg_reset." "0,1" newline bitfld.word 0x0 2. "PG_RESET_OVRD_VAL,Override value for pg_reset." "0,1" newline bitfld.word 0x0 1. "PCS_PWR_STABLE_OVRD,Enable overriding value for pcs_pwr_stable." "0,1" newline bitfld.word 0x0 0. "PMA_PWR_STABLE_OVRD,Enable overriding value for pma_pwr_stable." "0,1" group.word 0xE4++0x1 line.word 0x0 "AON_PG_OVRD_OUT,Override values for outgoing power-gating signals" bitfld.word 0x0 1. "PCS_PWR_EN_OVRD,Enable overriding value for pcs_pwr_en." "0,1" newline bitfld.word 0x0 0. "PMA_PWR_EN_OVRD,Enable overriding value for pma_pwr_en." "0,1" group.word 0xE8++0x1 line.word 0x0 "AON_SUP_OVRD_IN,Override Values for Incoming Support Block signals" bitfld.word 0x0 5. "REF_CLK_EN_OVRD_EN,Override enable for ref_clk_en" "0,1" newline bitfld.word 0x0 4. "REF_CLK_EN_OVRD_VAL,Override value for ref_clk_en" "0,1" newline bitfld.word 0x0 3. "MPLLB_FORCE_EN_OVRD_EN,Override enable for mpllb_force_en" "0,1" newline bitfld.word 0x0 2. "MPLLB_FORCE_EN_OVRD_VAL,Override value for mpllb_force_en" "0,1" newline bitfld.word 0x0 1. "MPLLA_FORCE_EN_OVRD_EN,Override enable for mplla_force_en" "0,1" newline bitfld.word 0x0 0. "MPLLA_FORCE_EN_OVRD_VAL,Override value for mplla_force_en" "0,1" group.word 0xEC++0x1 line.word 0x0 "AON_SUP_OVRD_OUT,Override Values for Out-going Support Block signals" bitfld.word 0x0 3. "MPLLB_FORCE_ACK_OVRD_EN,Override enable for output mpllb_force_ack." "0,1" newline bitfld.word 0x0 2. "MPLLB_FORCE_ACK_OVRD_VAL,Override value for output mpllb_force_ack." "0,1" newline bitfld.word 0x0 1. "MPLLA_FORCE_ACK_OVRD_EN,Override enable for output mplla_force_ack." "0,1" newline bitfld.word 0x0 0. "MPLLA_FORCE_ACK_OVRD_VAL,Override value for output mplla_force_ack." "0,1" group.word 0xF0++0x1 line.word 0x0 "AON_RTN_RX_VAL,Resistor Tune RX Value" hexmask.word.byte 0x0 0.--5. 1. "RTN_RX_VAL,Stored resister tune RX value" group.word 0xF4++0x1 line.word 0x0 "AON_RTN_TXDN_VAL,Resistor Tune TX Down Value" hexmask.word 0x0 0.--9. 1. "RTN_TXDN_VAL,Stored resister tune TX down value" group.word 0xF8++0x1 line.word 0x0 "AON_RTN_TXUP_VAL,Resistor Tune TX Up Value" hexmask.word 0x0 0.--9. 1. "RTN_TXUP_VAL,Stored resister tune TX up value" group.word 0xFC++0x1 line.word 0x0 "AON_CMNCAL_STATUS,Common Calibration Status" bitfld.word 0x0 1. "CMNCAL_DN,Indicates whether common calibration (mpll and rtune) has been completed by this lane or not." "0,1" newline bitfld.word 0x0 0. "CMNCAL_INIT,Indicates whether common calibration (mpll and rtune) has been started by this lane or not." "0,1" group.word 0x100++0x1 line.word 0x0 "AON_SRAM_OVRD_IN,Override for incoming SRAM inputs" bitfld.word 0x0 3. "SRAM_BYP_OVRD_EN,Override enable for input sram_bypass" "0,1" newline bitfld.word 0x0 2. "SRAM_BYP_OVRD_VAL,Override value for input sram_bypass" "0,1" newline bitfld.word 0x0 1. "SRAM_EXT_LD_DN_OVRD_EN,Override enable for input sram_ext_ld_done" "0,1" newline bitfld.word 0x0 0. "SRAM_EXT_LD_DN_OVRD_VAL,Override value for input sram_ext_ld_done" "0,1" rgroup.word 0x104++0x1 line.word 0x0 "AON_SRAM_IN,Monitor for SRAM inputs" bitfld.word 0x0 1. "SRAM_EXT_LD_DN,Value from RAW PCS for sram_ext_ld_done" "0,1" newline bitfld.word 0x0 0. "SRAM_BYP,Value from RAW PCS for sram_bypass" "0,1" rgroup.word 0x108++0x1 line.word 0x0 "AON_SRAM_OUT,Monitor for SRAM outputs" bitfld.word 0x0 0. "SRAM_INIT_DN,Value from RAW PCS for sram_init_done" "0,1" group.word 0x10C++0x1 line.word 0x0 "AON_FW_VERSION_0,Firmware Version Register 0" hexmask.word.byte 0x0 12.--15. 1. "MAJOR_VER,A major firmware label which corresponds to significant change in PCS RAW PMA or firmware algorithm or structure" newline hexmask.word.byte 0x0 4.--11. 1. "MINOR_VER,Minor update in firmware for any bug fixes of function enhancement" newline hexmask.word.byte 0x0 0.--3. 1. "BRANCH,BRANCH" group.word 0x110++0x1 line.word 0x0 "AON_FW_VERSION_1,Firmware Version Register 1" hexmask.word.byte 0x0 12.--15. 1. "FW_EN,selectively enable or disable certain FW features for the same branch" newline hexmask.word.byte 0x0 7.--11. 1. "DAY,Day (1-31)" newline hexmask.word.byte 0x0 3.--6. 1. "MONTH,Month(1-12)" newline bitfld.word 0x0 0.--2. "YEAR,Year (2018 = 0 2019 = 1 etc." "0,1,2,3,4,5,6,7" group.word 0x20000++0x1 line.word 0x0 "MPLLA_OVRD_IN_0,Override values for incoming MPLLA controls from ASIC. register #0" bitfld.word 0x0 15. "OVRD_EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 13.--14. "MPLLA_TX_CLK_DIV,Override value for mplla_tx_clk_div" "0,1,2,3" newline hexmask.word.byte 0x0 5.--12. 1. "MPLLA_MULTIPLIER,Override value for mplla_multiplier" newline bitfld.word 0x0 4. "MPLLA_DIV16P5_CLK_EN,Override value for mplla_div16p5_clk_en" "0,1" newline bitfld.word 0x0 3. "MPLLA_DIV10_CLK_EN,Override value for mplla_div10_clk_en" "0,1" newline bitfld.word 0x0 2. "MPLLA_DIV8_CLK_EN,Override value for mplla_div8_clk_en" "0,1" newline bitfld.word 0x0 1. "REF_CLK_MPLLA_DIV2_EN,Override value for ref_clk_mplla_div2_en" "0,1" newline bitfld.word 0x0 0. "MPLLA_EN,Override value for mplla_en" "0,1" group.word 0x20004++0x1 line.word 0x0 "MPLLA_OVRD_IN_1,Override values for incoming MPLLA controls from ASIC. register #1" bitfld.word 0x0 13. "MPLLA_SSC_CLK_SEL,Override value for mplla_ssc_clk_sel[2:0]" "0,1" newline hexmask.word 0x0 2.--12. 1. "MPLLA_FRACN_CTRL,Override value for mplla_fracn_ctrl" newline bitfld.word 0x0 1. "MPLLA_SSC_UP_SPREAD,Override value for mplla_ssc_up_spread" "0,1" newline bitfld.word 0x0 0. "MPLLA_SSC_EN,Override value for mplla_ssc_en" "0,1" group.word 0x20008++0x1 line.word 0x0 "MPLLA_OVRD_IN_2,Override values for incoming MPLLA controls from ASIC. register #2" hexmask.word 0x0 0.--11. 1. "MPLLA_SSC_F_CNT_INIT,Override value for mplla_ssc_freq_cnt_init[11:0]" group.word 0x2000C++0x1 line.word 0x0 "MPLLA_OVRD_IN_3,Override values for incoming MPLLA controls from ASIC. register #3" hexmask.word.byte 0x0 0.--7. 1. "MPLLA_SSC_F_CNT_PEAK,Override value for mplla_ssc_freq_cnt_peak[7:0]" group.word 0x20010++0x1 line.word 0x0 "MPLLA_OVRD_IN_4,Override values for incoming MPLLA controls from ASIC. register #4" hexmask.word 0x0 0.--15. 1. "MPLLA_BANDWIDTH,Override value for mplla_bandwidth[15:0]" rgroup.word 0x20014++0x1 line.word 0x0 "MPLLA_ASIC_IN_0,Current values for incoming MPLLA controls from ASIC. register #0" bitfld.word 0x0 13.--14. "MPLLA_TX_CLK_DIV,Value from ASIC for mplla_tx_clk_div" "0,1,2,3" newline hexmask.word.byte 0x0 5.--12. 1. "MPLLA_MULTIPLIER,Value from ASIC for mplla_multiplier" newline bitfld.word 0x0 4. "MPLLA_DIV16P5_CLK_EN,Value from ASIC for mplla_div16p5_clk_en" "0,1" newline bitfld.word 0x0 3. "MPLLA_DIV10_CLK_EN,Value from ASIC for mplla_div10_clk_en" "0,1" newline bitfld.word 0x0 2. "MPLLA_DIV8_CLK_EN,Value from ASIC for mplla_div8_clk_en" "0,1" newline bitfld.word 0x0 1. "REF_CLK_MPLLA_DIV2_EN,Value from ASIC for ref_clk_mplla_div2_en" "0,1" newline bitfld.word 0x0 0. "MPLLA_EN,Value from ASIC for mplla_en" "0,1" rgroup.word 0x20018++0x1 line.word 0x0 "MPLLA_ASIC_IN_1,Current values for incoming MPLLA controls from ASIC. register #1" bitfld.word 0x0 13. "MPLLA_SSC_CLK_SEL,Value from mplla_ssc_clk_sel" "0,1" newline hexmask.word 0x0 2.--12. 1. "MPLLA_FRACN_CTRL,Value from mplla_fracn_ctrl" newline bitfld.word 0x0 1. "MPLLA_SSC_UP_SPREAD,Value from mplla_ssc_up_spread" "0,1" newline bitfld.word 0x0 0. "MPLLA_SSC_EN,Value from mplla_ssc_en" "0,1" rgroup.word 0x2001C++0x1 line.word 0x0 "MPLLA_ASIC_IN_2,Current values for incoming MPLLA controls from ASIC. register #2" hexmask.word 0x0 0.--15. 1. "MPLLA_BANDWIDTH,Value from ASIC for mplla_bandwidth" rgroup.word 0x20020++0x1 line.word 0x0 "MPLLA_FREQ_CNT_INIT_ASIC_IN,Current values for incoming level controls from ASIC" hexmask.word 0x0 0.--11. 1. "MPLLA_SSC_F_CNT_INIT,Value from ASIC for MPLLA_SSC_FREQ_CNT_INIT" group.word 0x20024++0x1 line.word 0x0 "MPLLA_CAL_CTRL,MPLL Calibration controls" bitfld.word 0x0 15. "EXT_CAL_DN,Set the external calibration status to done" "0,1" newline hexmask.word.byte 0x0 7.--14. 1. "EXT_CRS_TN,Value of mpll_ana_coarse_tune_i[7:0] in external calibration mode" newline bitfld.word 0x0 6. "EXT_CHKFRQ_EN,Check the frequency of the MPLL Only valid in external calibration mode" "0,1" newline bitfld.word 0x0 5. "MPLL_EXTCAL,Enable external calibration of MPLL" "0,1" newline bitfld.word 0x0 4. "MPLL_SKIPCAL,Skip automatic (internal) calibration of MPLL (and also skip external calibration if it is enabled)" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "LOAD_CNT,MSBs for the CHKFRQ FSM ld_val[10:0] load value 0x0 - gives a ld_val of 0 no PPM difference can be detected" group.word 0x20028++0x1 line.word 0x0 "MPLLA_MPLL_OVRD,MPLL override controls" hexmask.word.byte 0x0 5.--9. 1. "DTB_SEL,DTB select for MPLL dtb signals possible values are:" newline bitfld.word 0x0 4. "FST_MPLL_LOCK,Enable fast MPLL locking" "0,1" newline bitfld.word 0x0 3. "FST_MPLL_PU,Enable fast MPLL powerup" "0,1" newline bitfld.word 0x0 2. "MPLL_PCLK_EN,Overrides the PWR FSM mpll_pclk_en signal" "0,1" newline bitfld.word 0x0 1. "MPLL_FBDIGCLK_EN,Overrides the PWR FSM mpll_fb_dig_clk_en signal" "0,1" newline bitfld.word 0x0 0. "OVRD_SEL,Override enable bit" "0,1" rgroup.word 0x2002C++0x1 line.word 0x0 "MPLLA_STAT,MPLL status register" bitfld.word 0x0 14. "MPLL_ANA_EN,Current value of mpll_ana_en_i" "0,1" newline bitfld.word 0x0 13. "MPLL_RST,Current value of mpll_ana_rst_i" "0,1" newline bitfld.word 0x0 12. "MPLL_CAL,Current value of mpll_ana_cal_i" "0,1" newline bitfld.word 0x0 11. "MPLL_FBCLK_EN,Current value of mpll_ana_fb_clk_en_i" "0,1" newline bitfld.word 0x0 10. "MPLL_OUTPUT_EN,Current value of mpll_ana_output_en_i" "0,1" newline bitfld.word 0x0 9. "MPLL_PCLK_EN,Current value of mpll_pclk_en" "0,1" newline bitfld.word 0x0 8. "MPLL_L_LANES,Current value of lane_mpll_l" "0,1" newline bitfld.word 0x0 7. "MPLL_R_LANES,Current value of lane_mpll_r" "0,1" newline bitfld.word 0x0 6. "MPLL_CAL_RDY,Current value of mpll_cal_rdy" "0,1" newline bitfld.word 0x0 5. "CHKFRQ_DN,Current value of mpll_chkfrq_done" "0,1" newline bitfld.word 0x0 4. "MPLL_TOOSL,Current value of mpll_tooslow" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "FSM_STATE,Current value of the PWR FSM state register" group.word 0x20030++0x1 line.word 0x0 "MPLLA_MPLL_MISC_T_THR,Thresholds for MPLL CAL Update timer and MPLL VCO Stabilization timer" hexmask.word.byte 0x0 9.--12. 1. "MPLL_CAL_UPD_T_THR,Threshold for the MPLL calibration control word update timer in terms of number of ref_rang_clk cycles" newline hexmask.word 0x0 0.--8. 1. "VCO_STAB_T_THR,Threshold for the VCO stabilization timer in terms of number of reference clock cycles" group.word 0x20034++0x1 line.word 0x0 "MPLLA_PCLK_VCO_CLK,Thresholds for PCLK enable and MPLL VCO Clock Stabilization timer" hexmask.word.byte 0x0 11.--15. 1. "PCLK_EN_T_THR,Threshold for the PCLK enable timer in terms of number of ref_range_clk cycles" newline hexmask.word 0x0 0.--10. 1. "VCO_CLK_STAB_T_THR,Threshold for the VCO clock stabilization timer in terms of number of reference clock cycles" group.word 0x20038++0x1 line.word 0x0 "MPLLA_PCLK_DIS_AND_MPLL_VCO_PD_THR,Thresholds for PCLK disable and MPLL VCO POWER DOWN and MPLL ANA POWER UP timer" hexmask.word.byte 0x0 5.--9. 1. "MPLL_VCO_PD_T_THR,Threshold for the MPLL VCO power down timer in terms of number of ref_range_clk cycles" newline hexmask.word.byte 0x0 0.--4. 1. "PCLK_DIS_T_THR,Threshold for the PCLK disable timer in terms of number of ref_range_clk cycles" group.word 0x2003C++0x1 line.word 0x0 "MPLLA_MPLL_ANA_PU_T_THR,Thresholds for PCLK disable and MPLL VCO POWER DOWN and MPLL ANA POWER UP timer" hexmask.word.byte 0x0 0.--6. 1. "MPLL_ANA_PU_T_THR,Threshold for the MPLL analog power up timer in terms of number of ref_range_clk cycles" group.word 0x20040++0x1 line.word 0x0 "MPLLA_MPLL_FBCLK_FBDIGCLK,Thresholds for MPLL feedback clock enable and MPLL feedback digital clock disable timer" hexmask.word.byte 0x0 4.--7. 1. "MPLL_FBDIGCLK_DIS_T_THR,Threshold for the MPLL feedback digital clock disable timer in terms of number of ref_range_clk cycles" newline hexmask.word.byte 0x0 0.--3. 1. "MPLL_FBCLK_EN_T_THR,Threshold for the MPLL feedback clock enable timer in terms of number of ref_range_clk cycles" rgroup.word 0x20044++0x1 line.word 0x0 "MPLLA_MPLL_CRS_TN_VAL,MPLL coarse_tune value register" hexmask.word.byte 0x0 0.--7. 1. "MPLL_CRS_TN_VAL,Current value of mpll_ana_coarse_tune_i" group.word 0x20048++0x1 line.word 0x0 "MPLLA_MPLL_SKIPCAL_CRS_TN,Value for MPLL coarse_tune when skipping calibration" hexmask.word.byte 0x0 0.--7. 1. "MPLL_SKIPCAL_CRS_TN,Value for MPLL coarse_tune when calibration is skipped" group.word 0x2004C++0x1 line.word 0x0 "MPLLA_SSC_SS_PH,Current MPLL phase selector value" hexmask.word.byte 0x0 12.--15. 1. "FRACN_CTRL_DIV,FracN Ctrl Divisor to get better resolution and lower PPM errors when synthesizing from a non-integer reference clock." newline bitfld.word 0x0 11. "ZERO_F,Zero frequency register." "0,1" newline hexmask.word 0x0 2.--10. 1. "VAL,Phase value from zero reference (volatile and 2 reads needed to read value)" newline bitfld.word 0x0 0.--1. "DTHR,Bits below the useful resolution (volatile and 2 reads needed to read value)" "0,1,2,3" group.word 0x20050++0x1 line.word 0x0 "MPLLA_SSC_SS_FREQ_0,Frequency Control for Spread Spectrum #0" bitfld.word 0x0 12. "F_0_OVRD,Frequency Reigster Override." "0,1" newline hexmask.word 0x0 0.--11. 1. "F_CNT_INIT,Initial Frequency Counter Value (volatile and 2 reads needed to read value)" group.word 0x20054++0x1 line.word 0x0 "MPLLA_SSC_SS_FREQ_1,Frequency Control for Spread Spectrum #1" bitfld.word 0x0 8. "F_1_OVRD,Frequency Reigster Override." "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "F_PEAK,Peak Frequency Value (for changing direction) (volatile and 2 reads needed to read value)" group.word 0x20058++0x1 line.word 0x0 "SUP_ANA_MPLLA_LOOP_CTRL,MPLLA_LOOP_CTRL" bitfld.word 0x0 6.--7. "pfd_pw_ctrl,FD reset pulse width control" "0,1,2,3" newline bitfld.word 0x0 5. "lpn_vreg,vreg_vco draws power from vph instead of vp when asserted" "0,1" newline bitfld.word 0x0 4. "meas_iv_23,VCO control buffer bypass (active high)" "0,1" newline bitfld.word 0x0 3. "pr_bypass,Set local pr bypass control to ON" "0,1" newline bitfld.word 0x0 2. "mode_old_ssc,Switch back to 2-bit ssc" "0,1" newline bitfld.word 0x0 1. "ovrd_pr_bypass,Enable local control of PR bypass signal" "0,1" newline bitfld.word 0x0 0. "NC0,Reserved" "0,1" group.word 0x2005C++0x1 line.word 0x0 "SUP_ANA_MPLLA_OVRD,MPLLA_OVRD" bitfld.word 0x0 7. "reset_reg,set local reset control to ON" "0,1" newline bitfld.word 0x0 6. "ovrd_reset,enable local control of reset signal (mpll_rst)" "0,1" newline bitfld.word 0x0 5. "fb_clk_en_reg,set local feedback clock control to ON" "0,1" newline bitfld.word 0x0 4. "ovrd_fb_clk_en,enable local control of feedback clock control signal (mpll_fb_clk_en)" "0,1" newline bitfld.word 0x0 3. "cal_reg,set local calibration control to ON" "0,1" newline bitfld.word 0x0 2. "ovrd_cal,enable local control of calibration signal (mpll_cal)" "0,1" newline bitfld.word 0x0 1. "enable_reg,set local enable control to ON" "0,1" newline bitfld.word 0x0 0. "ovrd_enable,enable local control of enable signal (mpll_en)" "0,1" group.word 0x20060++0x1 line.word 0x0 "SUP_ANA_MPLLA_ATB1,MPLLA_ATB1" bitfld.word 0x0 7. "meas_iv_7,Measure vreg_left (atb_s_p)" "0,1" newline bitfld.word 0x0 6. "meas_iv_6,Measure vreg_s in MPLL voltage regulator on atb_s_p and measure vreg_s_drv in MPLL voltage regulator on atb_s_m" "0,1" newline bitfld.word 0x0 5. "meas_iv_5,Measure vreg_vco on atb_s_p" "0,1" newline bitfld.word 0x0 4. "meas_iv_4,Override vreg_cp to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 3. "meas_iv_3,Override vreg_vp to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 2. "meas_iv_2,Override vreg_left to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 1. "meas_iv_1,Override vreg_right to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 0. "meas_iv_0,Override vreg_vco to be 1X of voltage on atb_s_m" "0,1" group.word 0x20064++0x1 line.word 0x0 "SUP_ANA_MPLLA_ATB2,MPLLA_ATB2" bitfld.word 0x0 7. "meas_iv_15,Measure reference voltage for VCO magnitude control amp on atb_s_m" "0,1" newline bitfld.word 0x0 6. "meas_iv_14,Measure VCO magnitude control signal vdrive on atb_s_p" "0,1" newline bitfld.word 0x0 5. "meas_iv_13,Measure buffered version of ctrl_fine_int on atb_s_p" "0,1" newline bitfld.word 0x0 4. "meas_iv_12,Measure GD in MPLL on atb_s_p" "0,1" newline bitfld.word 0x0 3. "meas_iv_11,Measure VP in MPLL on atb_s_p" "0,1" newline bitfld.word 0x0 2. "meas_iv_10,Measure vreg_cp on atb_s_p" "0,1" newline bitfld.word 0x0 1. "meas_iv_9,Measure vreg_vp on atb_s_p" "0,1" newline bitfld.word 0x0 0. "meas_iv_8,Measure vreg_right on atb_s_p" "0,1" group.word 0x20068++0x1 line.word 0x0 "SUP_ANA_MPLLA_ATB3,MPLLA_ATB3" bitfld.word 0x0 7. "meas_iv_22,Measure CP vsense on atb_s_p" "0,1" newline bitfld.word 0x0 6. "atb_select,Connect internal ATB_S signals to external ATB_S signals" "0,1" newline bitfld.word 0x0 5. "meas_iv_21,Measure DLL nbias on atb_s_m" "0,1" newline bitfld.word 0x0 4. "meas_iv_20,Override VCO amp reference to be smaller than the default setting" "0,1" newline bitfld.word 0x0 3. "meas_iv_19,Override VCO amp reference to be larger than the default setting" "0,1" newline bitfld.word 0x0 2. "meas_iv_18,Override VCO amp reference to be the voltage on atb_s_m" "0,1" newline bitfld.word 0x0 1. "meas_iv_17,Force fine control voltage to be ~45mV lower than mid value in cal mode (min value)" "0,1" newline bitfld.word 0x0 0. "meas_iv_16,Force fine control voltage to be ~45mV higher than mid value in cal mode (max value)" "0,1" group.word 0x2006C++0x1 line.word 0x0 "SUP_MPLLA_OVRD_OUT,Override value for mplla signals going to ANA" bitfld.word 0x0 11. "OVRD_SEL,Override bit for mplla_ana outputs" "0,1" newline bitfld.word 0x0 10. "MPLLA_DIV_CLK_EN,Overrides the mplla_ana_div_clk_en signal" "0,1" newline bitfld.word 0x0 9. "MPLLA_DIV16P5_CLK_EN,Overrides the mplla_ana_div16p5_clk_en signal" "0,1" newline bitfld.word 0x0 8. "MPLLA_FBCLK_EN,Overrides the mplla_fb_clk_en signal" "0,1" newline bitfld.word 0x0 7. "MPLLA_DIV10_CLK_EN,Overrides the mplla_ana_div10_clk_en signal" "0,1" newline bitfld.word 0x0 6. "MPLLA_DIV8_CLK_EN,Overrides the mplla_ana_div8_clk_en signal" "0,1" newline bitfld.word 0x0 5. "MPLLA_OUTPUT_R_EN,Overrides the mplla_ana_output_r_en signal" "0,1" newline bitfld.word 0x0 4. "MPLLA_OUTPUT_L_EN,Overrides the mplla_ana_output_l_en signal" "0,1" newline bitfld.word 0x0 3. "MPLLA_OUTPUT_EN,Overrides the mplla_ana_output_en signal" "0,1" newline bitfld.word 0x0 2. "MPLLA_CAL,Overrides the mplla_ana_cal signal" "0,1" newline bitfld.word 0x0 1. "MPLLA_RST,Overrides the mplla_ana_rst signal" "0,1" newline bitfld.word 0x0 0. "MPLLA_ANA_EN,Overrides the mplla_ana_en signal" "0,1" group.word 0x20070++0x1 line.word 0x0 "SUP_MPLLA_PMIX_OVRD_OUT,Override value for mplla pmix signals going to ANA" bitfld.word 0x0 10. "MPLLA_PMIX_OVRD_EN,Override bit for mplla_ana_pmix_sel signal" "0,1" newline bitfld.word 0x0 9. "MPLLA_PMIX_EN,Override bit for mplla_ana_pmix_en signal" "0,1" newline bitfld.word 0x0 8. "MPLLA_PMIX_SEL_OVRD_EN,Override bit for mplla_ana_pmix_en signal" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLA_PMIX_SEL,Overrides the mplla_ana_pmix_sel signal" group.word 0x20074++0x1 line.word 0x0 "MPLLA_BW_OVRD_IN,Override values for incoming MPLLA bandwidth" hexmask.word 0x0 0.--15. 1. "MPLLA_BW_OVRD_VAL,Override value for mplla_bandwidth[15:0]" group.word 0x20078++0x1 line.word 0x0 "MPLLA_SSC_CTL_OVRD_IN,Override values for incoming MPLLA SSC control settings" bitfld.word 0x0 13. "MPLLA_SSC_CTL_OVRD_EN,Override value for MPLLA SSC control settings" "0,1" newline bitfld.word 0x0 12. "MPLLA_SSC_CLK_SEL,Override value for mplla_ssc_clk_sel" "0,1" newline bitfld.word 0x0 11. "MPLLA_SSC_UP_SPREAD,Override value for mplla_ssc_up_spread" "0,1" newline hexmask.word 0x0 0.--10. 1. "MPLLA_FRACN_CTRL,Override value for mplla_fracn_ctrl[10:0]" group.word 0x2007C++0x1 line.word 0x0 "MPLLA_SSC_EN_OVRD_IN,Override values for incoming MPLLA SSC Input Signals" bitfld.word 0x0 14. "MPLLA_SSC_EN_OVRD_EN,Override enable for MPLLA SSC enable" "0,1" newline bitfld.word 0x0 13. "MPLLA_SSC_EN_OVRD_VAL,Override value for MPLLA SSC enable" "0,1" newline bitfld.word 0x0 12. "MPLLA_SSC_F_CNT_INIT_EN,Override value for mplla_ssc_freq_cnt_init" "0,1" newline hexmask.word 0x0 0.--11. 1. "MPLLA_SSC_F_CNT_INIT,Override value for mplla_ssc_freq_cnt_init" group.word 0x20080++0x1 line.word 0x0 "MPLLA_MISC_OVRD_IN,Override values for incoming MPLLA-related Input Signals" bitfld.word 0x0 11. "MPLLA_OVRD_EN,Override enable for mplla_bandwidth and mplla_tx_clk_div" "0,1" newline bitfld.word 0x0 9.--10. "MPLLA_TX_CLK_DIV_OVRD_VAL,Override value for MPLLA SSC enable" "0,1,2,3" newline bitfld.word 0x0 8. "MPLLA_SSC_F_CNT_PEAK_EN,Override value for mplla_ssc_freq_cnt_peak" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLA_SSC_F_CNT_PEAK,Override value for mplla_ssc_freq_cnt_peak[7:0]" group.word 0x20084++0x1 line.word 0x0 "AON_MPLLA_CRS_TN_BK_0,MPLLA Coarse Tune Value for Bank 0" bitfld.word 0x0 8. "MPLLA_CRS_TN_DN_BK_0,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLA_CRS_TN_BK_0,Stored bank0 coarse tune value for MPLLA" group.word 0x20088++0x1 line.word 0x0 "AON_MPLLA_CRS_TN_BK_1,MPLLA Coarse Tune Value for Bank 1" bitfld.word 0x0 8. "MPLLA_CRS_TN_DN_BK_1,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLA_CRS_TN_BK_1,Stored bank 1 coarse tune value for MPLLA" group.word 0x2008C++0x1 line.word 0x0 "AON_MPLLA_CRS_TN_BK_2,MPLLA Coarse Tune Value for Bank 2" bitfld.word 0x0 8. "MPLLA_CRS_TN_DN_BK_2,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLA_CRS_TN_BK_2,Stored bank 2 coarse tune value for MPLLA" group.word 0x20090++0x1 line.word 0x0 "AON_MPLLA_CRS_TN_BK_3,MPLLA Coarse Tune Value for Bank 3" bitfld.word 0x0 8. "MPLLA_CRS_TN_DN_BK_3,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLA_CRS_TN_BK_3,Stored bank 3 coarse tune value for MPLLA" rgroup.word 0x20094++0x1 line.word 0x0 "AON_MPLLA_CAL_BK_SEL,Value for MPLLA Bank Select" bitfld.word 0x0 0.--1. "MPLLA_CAL_BK_SEL,Value for MPLLA Bank select" "0,1,2,3" rgroup.word 0x20098++0x1 line.word 0x0 "AON_MPLLA_CRS_TN_DN,Indicates if the Selected MPLLA Calibration bank has the valid calibrated value" bitfld.word 0x0 0. "MPLLA_CRS_TN_DN,Indicates if the selected MPLLA Calibration bank has the valid calibrated value" "0,1" rgroup.word 0x2009C++0x1 line.word 0x0 "AON_MPLLA_CRS_TN,Selected COARSE TUNE Value for MPLLA" hexmask.word.byte 0x0 0.--7. 1. "MPLLA_CRS_TN,Selected coarse tune value for MPLLA" group.word 0x200A0++0x1 line.word 0x0 "AON_MPLLA_IN_RECAL,Indicates if MPLLA is in Re-calibration" bitfld.word 0x0 0. "MPLLA_IN_RECAL,Indicates if MPLLA is in re-calibration" "0,1" group.word 0x200A4++0x1 line.word 0x0 "AON_PMA_MPLLA_RECAL_BK_SEL,Current Bank selected for MPLLA Coarse Tune in PMA" bitfld.word 0x0 0.--1. "PMA_MPLLA_RECAL_BK_SEL,Current Bank selected for MPLLA coarse tune in PMA" "0,1,2,3" rgroup.word 0x200A8++0x1 line.word 0x0 "AON_MPLLA_BK_SEL_DN,Status for MPLLA Re-calibration or Switching" bitfld.word 0x0 0. "DN,Status for MPLLA re-calibration or Switching" "0,1" group.word 0x40000++0x1 line.word 0x0 "MPLLB_OVRD_IN_0,Override values for incoming MPLLB controls from ASIC. register #0" bitfld.word 0x0 14. "OVRD_EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 12.--13. "MPLLB_TX_CLK_DIV,Override value for mpllb_tx_clk_div" "0,1,2,3" newline hexmask.word.byte 0x0 4.--11. 1. "MPLLB_MULTIPLIER,Override value for mpllb_multiplier" newline bitfld.word 0x0 3. "MPLLB_DIV10_CLK_EN,Override value for mpllb_div10_clk_en" "0,1" newline bitfld.word 0x0 2. "MPLLB_DIV8_CLK_EN,Override value for mpllb_div8_clk_en" "0,1" newline bitfld.word 0x0 1. "REF_CLK_MPLLB_DIV2_EN,Override value for ref_clk_mpllb_div2_en" "0,1" newline bitfld.word 0x0 0. "MPLLB_EN,Override value for mpllb_en" "0,1" group.word 0x40004++0x1 line.word 0x0 "MPLLB_OVRD_IN_1,Override values for incoming MPLLB controls from ASIC. register #1" bitfld.word 0x0 13. "MPLLB_SSC_CLK_SEL,Override value for mpllb_ssc_clk_sel[2:0]" "0,1" newline hexmask.word 0x0 2.--12. 1. "MPLLB_FRACN_CTRL,Override value for mpllb_fracn_ctrl" newline bitfld.word 0x0 1. "MPLLB_SSC_UP_SPREAD,Override value for mpllb_ssc_up_spread" "0,1" newline bitfld.word 0x0 0. "MPLLB_SSC_EN,Override value for mpllb_ssc_en" "0,1" group.word 0x40008++0x1 line.word 0x0 "MPLLB_OVRD_IN_2,Override values for incoming MPLLA controls from ASIC. register #2" hexmask.word 0x0 0.--11. 1. "MPLLB_SSC_F_CNT_INIT,Override value for mpllb_ssc_freq_cnt_init[11:0]" group.word 0x4000C++0x1 line.word 0x0 "MPLLB_OVRD_IN_3,Override values for incoming MPLLA controls from ASIC. register #3" hexmask.word.byte 0x0 0.--7. 1. "MPLLB_SSC_F_CNT_PEAK,Override value for mpllb_ssc_freq_cnt_peak[7:0]" group.word 0x40010++0x1 line.word 0x0 "MPLLB_OVRD_IN_4,Override values for incoming MPLLB controls from ASIC. register #4" hexmask.word 0x0 0.--15. 1. "MPLLB_BANDWIDTH,Override value for mpllb_bandwidth[15:0]" rgroup.word 0x40014++0x1 line.word 0x0 "MPLLB_ASIC_IN_0,Current values for incoming MPLLB controls from ASIC. register #0" bitfld.word 0x0 12.--13. "MPLLB_TX_CLK_DIV,Value from ASIC for mpllb_tx_clk_div" "0,1,2,3" newline hexmask.word.byte 0x0 4.--11. 1. "MPLLB_MULTIPLIER,Value from ASIC for mpllb_multiplier" newline bitfld.word 0x0 3. "MPLLB_DIV10_CLK_EN,Value from ASIC for mpllb_div10_clk_en" "0,1" newline bitfld.word 0x0 2. "MPLLB_DIV8_CLK_EN,Value from ASIC for mpllb_div8_clk_en" "0,1" newline bitfld.word 0x0 1. "REF_CLK_MPLLB_DIV2_EN,Value from ASIC for ref_clk_mpllb_div2_en" "0,1" newline bitfld.word 0x0 0. "MPLLB_EN,Value from ASIC for mpllb_en" "0,1" rgroup.word 0x40018++0x1 line.word 0x0 "MPLLB_ASIC_IN_1,Current values for incoming MPLLB controls from ASIC. register #1" bitfld.word 0x0 14.--15. "VPH_NOMINAL,Value from vph_nominal" "0,1,2,3" newline bitfld.word 0x0 13. "MPLLB_SSC_CLK_SEL,Value from mpllb_ssc_clk_sel[2:0]" "0,1" newline hexmask.word 0x0 2.--12. 1. "MPLLB_FRACN_CTRL,Value from mpllb_fracn_ctrl" newline bitfld.word 0x0 1. "MPLLB_SSC_UP_SPREAD,Value from mpllb_ssc_up_spread" "0,1" newline bitfld.word 0x0 0. "MPLLB_SSC_EN,Value from mpllb_ssc_en" "0,1" rgroup.word 0x4001C++0x1 line.word 0x0 "MPLLB_ASIC_IN_2,Current values for incoming MPLLB controls from ASIC. register #2" hexmask.word 0x0 0.--15. 1. "MPLLB_BANDWIDTH,Value from ASIC for mpllb_bandwidth" rgroup.word 0x40020++0x1 line.word 0x0 "MPLLB_FREQ_CNT_INIT_ASIC_IN,Current values for incoming level controls from ASIC" hexmask.word 0x0 0.--11. 1. "MPLLB_SSC_F_CNT_INIT,Value from ASIC for MPLLB_SSC_FREQ_CNT_INIT" group.word 0x40024++0x1 line.word 0x0 "MPLLB_CAL_CTRL,MPLL Calibration controls" bitfld.word 0x0 15. "EXT_CAL_DN,Set the external calibration status to done" "0,1" newline hexmask.word.byte 0x0 7.--14. 1. "EXT_CRS_TN,Value of mpll_ana_coarse_tune_i[7:0] in external calibration mode" newline bitfld.word 0x0 6. "EXT_CHKFRQ_EN,Check the frequency of the MPLL Only valid in external calibration mode" "0,1" newline bitfld.word 0x0 5. "MPLL_EXTCAL,Enable external calibration of MPLL" "0,1" newline bitfld.word 0x0 4. "MPLL_SKIPCAL,Skip automatic (internal) calibration of MPLL (and also skip external calibration if it is enabled)" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "LOAD_CNT,MSBs for the CHKFRQ FSM ld_val[10:0] load value 0x0 - gives a ld_val of 0 no PPM difference can be detected" group.word 0x40028++0x1 line.word 0x0 "MPLLB_MPLL_OVRD,MPLL override controls" hexmask.word.byte 0x0 5.--9. 1. "DTB_SEL,DTB select for MPLL dtb signals possible values are:" newline bitfld.word 0x0 4. "FST_MPLL_LOCK,Enable fast MPLL locking" "0,1" newline bitfld.word 0x0 3. "FST_MPLL_PU,Enable fast MPLL powerup" "0,1" newline bitfld.word 0x0 2. "MPLL_PCLK_EN,Overrides the PWR FSM mpll_pclk_en signal" "0,1" newline bitfld.word 0x0 1. "MPLL_FBDIGCLK_EN,Overrides the PWR FSM mpll_fb_dig_clk_en signal" "0,1" newline bitfld.word 0x0 0. "OVRD_SEL,Override enable bit" "0,1" rgroup.word 0x4002C++0x1 line.word 0x0 "MPLLB_STAT,MPLL status register" bitfld.word 0x0 14. "MPLL_ANA_EN,Current value of mpll_ana_en_i" "0,1" newline bitfld.word 0x0 13. "MPLL_RST,Current value of mpll_ana_rst_i" "0,1" newline bitfld.word 0x0 12. "MPLL_CAL,Current value of mpll_ana_cal_i" "0,1" newline bitfld.word 0x0 11. "MPLL_FBCLK_EN,Current value of mpll_ana_fb_clk_en_i" "0,1" newline bitfld.word 0x0 10. "MPLL_OUTPUT_EN,Current value of mpll_ana_output_en_i" "0,1" newline bitfld.word 0x0 9. "MPLL_PCLK_EN,Current value of mpll_pclk_en" "0,1" newline bitfld.word 0x0 8. "MPLL_L_LANES,Current value of lane_mpll_l" "0,1" newline bitfld.word 0x0 7. "MPLL_R_LANES,Current value of lane_mpll_r" "0,1" newline bitfld.word 0x0 6. "MPLL_CAL_RDY,Current value of mpll_cal_rdy" "0,1" newline bitfld.word 0x0 5. "CHKFRQ_DN,Current value of mpll_chkfrq_done" "0,1" newline bitfld.word 0x0 4. "MPLL_TOOSL,Current value of mpll_tooslow" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "FSM_STATE,Current value of the PWR FSM state register" group.word 0x40030++0x1 line.word 0x0 "MPLLB_MPLL_MISC_T_THR,Thresholds for MPLL CAL Update timer and MPLL VCO Stabilization timer" hexmask.word.byte 0x0 9.--12. 1. "MPLL_CAL_UPD_T_THR,Threshold for the MPLL calibration control word update timer in terms of number of ref_rang_clk cycles" newline hexmask.word 0x0 0.--8. 1. "VCO_STAB_T_THR,Threshold for the VCO stabilization timer in terms of number of reference clock cycles" group.word 0x40034++0x1 line.word 0x0 "MPLLB_PCLK_VCO_CLK,Thresholds for PCLK enable and MPLL VCO Clock Stabilization timer" hexmask.word.byte 0x0 11.--15. 1. "PCLK_EN_T_THR,Threshold for the PCLK enable timer in terms of number of ref_range_clk cycles" newline hexmask.word 0x0 0.--10. 1. "VCO_CLK_STAB_T_THR,Threshold for the VCO clock stabilization timer in terms of number of reference clock cycles" group.word 0x40038++0x1 line.word 0x0 "MPLLB_PCLK_DIS_AND_MPLL_VCO_PD_THR,Thresholds for PCLK disable and MPLL VCO POWER DOWN and MPLL ANA POWER UP timer" hexmask.word.byte 0x0 5.--9. 1. "MPLL_VCO_PD_T_THR,Threshold for the MPLL VCO power down timer in terms of number of ref_range_clk cycles" newline hexmask.word.byte 0x0 0.--4. 1. "PCLK_DIS_T_THR,Threshold for the PCLK disable timer in terms of number of ref_range_clk cycles" group.word 0x4003C++0x1 line.word 0x0 "MPLLB_MPLL_ANA_PU_T_THR,Thresholds for PCLK disable and MPLL VCO POWER DOWN and MPLL ANA POWER UP timer" hexmask.word.byte 0x0 0.--6. 1. "MPLL_ANA_PU_T_THR,Threshold for the MPLL analog power up timer in terms of number of ref_range_clk cycles" group.word 0x40040++0x1 line.word 0x0 "MPLLB_MPLL_FBCLK_FBDIGCLK,Thresholds for MPLL feedback clock enable and MPLL feedback digital clock disable timer" hexmask.word.byte 0x0 4.--7. 1. "MPLL_FBDIGCLK_DIS_T_THR,Threshold for the MPLL feedback digital clock disable timer in terms of number of ref_range_clk cycles" newline hexmask.word.byte 0x0 0.--3. 1. "MPLL_FBCLK_EN_T_THR,Threshold for the MPLL feedback clock enable timer in terms of number of ref_range_clk cycles" rgroup.word 0x40044++0x1 line.word 0x0 "MPLLB_MPLL_CRS_TN_VAL,MPLL coarse_tune value register" hexmask.word.byte 0x0 0.--7. 1. "MPLL_CRS_TN_VAL,Current value of mpll_ana_coarse_tune_i" group.word 0x40048++0x1 line.word 0x0 "MPLLB_MPLL_SKIPCAL_CRS_TN,Value for MPLL coarse_tune when skipping calibration" hexmask.word.byte 0x0 0.--7. 1. "MPLL_SKIPCAL_CRS_TN,Value for MPLL coarse_tune when calibration is skipped" group.word 0x4004C++0x1 line.word 0x0 "MPLLB_SSC_SS_PH,Current MPLL phase selector value" hexmask.word.byte 0x0 12.--15. 1. "FRACN_CTRL_DIV,FracN Ctrl Divisor to get better resolution and lower PPM errors when synthesizing from a non-integer reference clock." newline bitfld.word 0x0 11. "ZERO_F,Zero frequency register." "0,1" newline hexmask.word 0x0 2.--10. 1. "VAL,Phase value from zero reference (volatile and 2 reads needed to read value)" newline bitfld.word 0x0 0.--1. "DTHR,Bits below the useful resolution (volatile and 2 reads needed to read value)" "0,1,2,3" group.word 0x40050++0x1 line.word 0x0 "MPLLB_SSC_SS_FREQ_0,Frequency Control for Spread Spectrum #0" bitfld.word 0x0 12. "F_0_OVRD,Frequency Reigster Override." "0,1" newline hexmask.word 0x0 0.--11. 1. "F_CNT_INIT,Initial Frequency Counter Value (volatile and 2 reads needed to read value)" group.word 0x40054++0x1 line.word 0x0 "MPLLB_SSC_SS_FREQ_1,Frequency Control for Spread Spectrum #1" bitfld.word 0x0 8. "F_1_OVRD,Frequency Reigster Override." "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "F_PEAK,Peak Frequency Value (for changing direction) (volatile and 2 reads needed to read value)" group.word 0x40058++0x1 line.word 0x0 "SUP_ANA_MPLLB_LOOP_CTRL,MPLLB_LOOP_CTRL" bitfld.word 0x0 6.--7. "pfd_pw_ctrl,PFD reset pulse width control" "0,1,2,3" newline bitfld.word 0x0 5. "lpn_vreg,vreg_vco draws power from vph instead of vp when asserted" "0,1" newline bitfld.word 0x0 4. "meas_iv_23,VCO control buffer bypass (active high)" "0,1" newline bitfld.word 0x0 3. "pr_bypass,Set local pr bypass control to ON" "0,1" newline bitfld.word 0x0 2. "mode_old_ssc,Switch back to 2-bit ssc" "0,1" newline bitfld.word 0x0 1. "ovrd_pr_bypass,Enable local control of PR bypass signal" "0,1" newline bitfld.word 0x0 0. "NC0,Reserved" "0,1" group.word 0x4005C++0x1 line.word 0x0 "SUP_ANA_MPLLB_OVRD,MPLLB_OVRD" bitfld.word 0x0 7. "reset_reg,set local reset control to ON" "0,1" newline bitfld.word 0x0 6. "ovrd_reset,enable local control of reset signal (mpll_rst)" "0,1" newline bitfld.word 0x0 5. "fb_clk_en_reg,set local feedback clock control to ON" "0,1" newline bitfld.word 0x0 4. "ovrd_fb_clk_en,enable local control of feedback clock control signal (mpll_fb_clk_en)" "0,1" newline bitfld.word 0x0 3. "cal_reg,set local calibration control to ON" "0,1" newline bitfld.word 0x0 2. "ovrd_cal,enable local control of calibration signal (mpll_cal)" "0,1" newline bitfld.word 0x0 1. "enable_reg,set local enable control to ON" "0,1" newline bitfld.word 0x0 0. "ovrd_enable,enable local control of enable signal (mpll_en)" "0,1" group.word 0x40060++0x1 line.word 0x0 "SUP_ANA_MPLLB_ATB1,MPLLB_ATB1" bitfld.word 0x0 7. "meas_iv_7,Measure vreg_left (atb_s_p)" "0,1" newline bitfld.word 0x0 6. "meas_iv_6,Measure vreg_s in MPLL voltage regulator on atb_s_p and measure vreg_s_drv in MPLL voltage regulator on atb_s_m" "0,1" newline bitfld.word 0x0 5. "meas_iv_5,Measure vreg_vco on atb_s_p" "0,1" newline bitfld.word 0x0 4. "meas_iv_4,Override vreg_cp to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 3. "meas_iv_3,Override vreg_vp to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 2. "meas_iv_2,Override vreg_left to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 1. "meas_iv_1,Override vreg_right to be 16/11X of voltage on atb_s_m" "0,1" newline bitfld.word 0x0 0. "meas_iv_0,Override vreg_vco to be 1X of voltage on atb_s_m" "0,1" group.word 0x40064++0x1 line.word 0x0 "SUP_ANA_MPLLB_ATB2,MPLLB_ATB2" bitfld.word 0x0 7. "meas_iv_15,Measure reference voltage for VCO magnitude control amp on atb_s_m" "0,1" newline bitfld.word 0x0 6. "meas_iv_14,Measure VCO magnitude control signal vdrive on atb_s_p" "0,1" newline bitfld.word 0x0 5. "meas_iv_13,Measure buffered version of ctrl_fine_int on atb_s_p" "0,1" newline bitfld.word 0x0 4. "meas_iv_12,Measure GD in MPLL on atb_s_p" "0,1" newline bitfld.word 0x0 3. "meas_iv_11,Measure VP in MPLL on atb_s_p" "0,1" newline bitfld.word 0x0 2. "meas_iv_10,Measure vreg_cp on atb_s_p" "0,1" newline bitfld.word 0x0 1. "meas_iv_9,Measure vreg_vp on atb_s_p" "0,1" newline bitfld.word 0x0 0. "meas_iv_8,Measure vreg_right on atb_s_p" "0,1" group.word 0x40068++0x1 line.word 0x0 "SUP_ANA_MPLLB_ATB3,MPLLB_ATB3" bitfld.word 0x0 7. "meas_iv_22,Measure CP vsense on atb_s_p" "0,1" newline bitfld.word 0x0 6. "atb_select,Connect internal ATB_S signals to external ATB_S signals" "0,1" newline bitfld.word 0x0 5. "meas_iv_21,Measure DLL nbias on atb_s_m" "0,1" newline bitfld.word 0x0 4. "meas_iv_20,Override VCO amp reference to be smaller than the default setting" "0,1" newline bitfld.word 0x0 3. "meas_iv_19,Override VCO amp reference to be larger than the default setting" "0,1" newline bitfld.word 0x0 2. "meas_iv_18,Override VCO amp reference to be the voltage on atb_s_m" "0,1" newline bitfld.word 0x0 1. "meas_iv_17,Force fine control voltage to be ~45mV lower than mid value in cal mode (min value)" "0,1" newline bitfld.word 0x0 0. "meas_iv_16,Force fine control voltage to be ~45mV higher than mid value in cal mode (max value)" "0,1" group.word 0x4006C++0x1 line.word 0x0 "SUP_MPLLB_OVRD_OUT,Override value for mpllb signals going to ANA" bitfld.word 0x0 10. "OVRD_SEL,Override bit for mpllb_ana outputs" "0,1" newline bitfld.word 0x0 9. "MPLLB_DIV_CLK_EN,Overrides the mpllb_ana_div_clk_en signal" "0,1" newline bitfld.word 0x0 8. "MPLLB_FBCLK_EN,Overrides the mpllb_fb_clk_en signal" "0,1" newline bitfld.word 0x0 7. "MPLLB_DIV10_CLK_EN,Overrides the mpllb_ana_div10_clk_en signal" "0,1" newline bitfld.word 0x0 6. "MPLLB_DIV8_CLK_EN,Overrides the mpllb_ana_div8_clk_en signal" "0,1" newline bitfld.word 0x0 5. "MPLLB_OUTPUT_R_EN,Overrides the mpllb_ana_output_r_en signal" "0,1" newline bitfld.word 0x0 4. "MPLLB_OUTPUT_L_EN,Overrides the mpllb_ana_output_l_en signal" "0,1" newline bitfld.word 0x0 3. "MPLLB_OUTPUT_EN,Overrides the mpllb_ana_output_en signal" "0,1" newline bitfld.word 0x0 2. "MPLLB_CAL,Overrides the mpllb_ana_cal signal" "0,1" newline bitfld.word 0x0 1. "MPLLB_RST,Overrides the mpllb_ana_rst signal" "0,1" newline bitfld.word 0x0 0. "MPLLB_ANA_EN,Overrides the mpllb_ana_en signal" "0,1" group.word 0x40070++0x1 line.word 0x0 "SUP_MPLLB_PMIX_OVRD_OUT,Override value for mpllb pmix signals going to ANA" bitfld.word 0x0 10. "MPLLB_PMIX_OVRD_EN,Override bit for mpllb_ana_pmix_sel/en signals" "0,1" newline bitfld.word 0x0 9. "MPLLB_PMIX__EN,Override bit for mpllb_ana_pmix_en signal" "0,1" newline bitfld.word 0x0 8. "MPLLB_PMIX_SEL_OVRD_EN,Override bit for mplla_ana_pmix_en signal" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_PMIX_SEL,Overrides the mpllb_ana_pmix_sel signal" group.word 0x40074++0x1 line.word 0x0 "MPLLB_BW_OVRD_IN,Override values for incoming MPLLB bandwidth" hexmask.word 0x0 0.--15. 1. "MPLLB_BW_OVRD_VAL,Override value for mpllb_bandwidth[15:0]" group.word 0x40078++0x1 line.word 0x0 "MPLLB_SSC_CTL_OVRD_IN,Override values for incoming MPLLB SSC control settings" bitfld.word 0x0 13. "MPLLB_SSC_CTL_OVRD_EN,Override value for MPLLB SSC control settings" "0,1" newline bitfld.word 0x0 12. "MPLLB_SSC_CLK_SEL,Override value for mpllb_ssc_clk_sel" "0,1" newline bitfld.word 0x0 11. "MPLLB_SSC_UP_SPREAD,Override value for mpllb_ssc_up_spread" "0,1" newline hexmask.word 0x0 0.--10. 1. "MPLLB_FRACN_CTRL,Override value for mpllb_fracn_ctrl[10:0]" group.word 0x4007C++0x1 line.word 0x0 "MPLLB_SSC_EN_OVRD_IN,Override values for incoming MPLLB SSC Input Signals" bitfld.word 0x0 14. "MPLLB_SSC_EN_OVRD_EN,Override enable for MPLLB SSC enable" "0,1" newline bitfld.word 0x0 13. "MPLLB_SSC_EN_OVRD_VAL,Override value for MPLLB SSC enable" "0,1" newline bitfld.word 0x0 12. "MPLLB_SSC_F_CNT_INIT_EN,Override value for mpllb_ssc_freq_cnt_init" "0,1" newline hexmask.word 0x0 0.--11. 1. "MPLLB_SSC_F_CNT_INIT,Override value for mpllb_ssc_freq_cnt_init" group.word 0x40080++0x1 line.word 0x0 "MPLLB_MISC_OVRD_IN,Override values for incoming MPLLB-related Input Signals" bitfld.word 0x0 11. "MPLLB_OVRD_EN,Override enable for mpllb_bandwidth and mpllb_tx_clk_div" "0,1" newline bitfld.word 0x0 9.--10. "MPLLB_TX_CLK_DIV_OVRD_VAL,Override value for mpllb_tx_clk_div" "0,1,2,3" newline bitfld.word 0x0 8. "MPLLB_SSC_F_CNT_PEAK_EN,Override value for mpllb_ssc_freq_cnt_peak" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_SSC_F_CNT_PEAK,Override value for mpllb_ssc_freq_cnt_peak[7:0]" group.word 0x40084++0x1 line.word 0x0 "AON_MPLLB_CRS_TN_BK_0,MPLLB Coarse Tune Value for Bank 0" bitfld.word 0x0 8. "MPLLB_CRS_TN_DN_BK_0,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_CRS_TN_BK_0,Stored bank0 coarse tune value for MPLLB" group.word 0x40088++0x1 line.word 0x0 "AON_MPLLB_CRS_TN_BK_1,MPLLB Coarse Tune Value for Bank 1" bitfld.word 0x0 8. "MPLLB_CRS_TN_DN_BK_1,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_CRS_TN_BK_1,Stored bank 1 coarse tune value for MPLLB" group.word 0x4008C++0x1 line.word 0x0 "AON_MPLLB_CRS_TN_BK_2,MPLLB Coarse Tune Value for Bank 2" bitfld.word 0x0 8. "MPLLB_CRS_TN_DN_BK_2,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_CRS_TN_BK_2,Stored bank 2 coarse tune value for MPLLB" group.word 0x40090++0x1 line.word 0x0 "AON_MPLLB_CRS_TN_BK_3,MPLLB Coarse Tune Value for Bank 3" bitfld.word 0x0 8. "MPLLB_CRS_TN_DN_BK_3,Indicates if the coarse tune value is calibrated value" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "MPLLB_CRS_TN_BK_3,Stored bank 3 coarse tune value for MPLLB" rgroup.word 0x40094++0x1 line.word 0x0 "AON_MPLLB_CAL_BK_SEL,Value for MPLLB Bank Select" bitfld.word 0x0 0.--1. "MPLLB_CAL_BK_SEL,Value for MPLL B Bank select" "0,1,2,3" rgroup.word 0x40098++0x1 line.word 0x0 "AON_MPLLB_CRS_TN_DN,Indicates if the selected MPLLB Calibration bank has the valid calibrated value" bitfld.word 0x0 0. "MPLLB_CRS_TN_DN,Indicates if the selected MPLLB Calibration bank has the valid calibrated value" "0,1" rgroup.word 0x4009C++0x1 line.word 0x0 "AON_MPLLB_CRS_TN,Selected COARSE TUNE Value for MPLLB" hexmask.word.byte 0x0 0.--7. 1. "MPLLB_CRS_TN,Selected coarse tune value for MPLLB" group.word 0x400A0++0x1 line.word 0x0 "AON_MPLLB_IN_RECAL,Indicates if MPLLB is in Re-calibration" bitfld.word 0x0 0. "MPLLB_IN_RECAL,Indicates if MPLLB is in re-calibration" "0,1" group.word 0x400A4++0x1 line.word 0x0 "AON_PMA_MPLLB_RECAL_BK_SEL,Current Bank selected for MPLLB Coarse Tune in PMA" bitfld.word 0x0 0.--1. "PMA_MPLLB_RECAL_BK_SEL,Current Bank selected for MPLLB coarse tune in PMA" "0,1,2,3" rgroup.word 0x400A8++0x1 line.word 0x0 "AON_MPLLB_BK_SEL_DN,Status for MPLLB Re-calibration or Switching" bitfld.word 0x0 0. "DN,Status for MPLLB re-calibration or Switching" "0,1" group.word 0x60000++0x1 line.word 0x0 "L0_ASIC_L_OVRD_IN,Override values for incoming LANE controls from ASIC" bitfld.word 0x0 2. "EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 1. "LANE_RX2TX_PAR_LB,Override value for lane_rx2tx_par_lb_en_r" "0,1" newline bitfld.word 0x0 0. "LANE_TX2RX_SER_LB,Override value for lane_tx2rx_ser_lb_en_r" "0,1" group.word 0x60004++0x1 line.word 0x0 "L0_ASIC_TX_OVRD_IN_0,Override values for incoming TX controls from ASIC. register #0" bitfld.word 0x0 15. "EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 14. "DETECT_RX_REQ,Override value for tx_detrx_req" "0,1" newline bitfld.word 0x0 13. "MPLLB_SEL,Override value for tx_mpllb_sel" "0,1" newline bitfld.word 0x0 11.--12. "WIDTH,Override value for tx_width[1:0]" "0,1,2,3" newline bitfld.word 0x0 8.--10. "RATE,Override value for tx_rate[2:0]" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 6.--7. "PSTATE,Override value for tx_pstate[1:0]" "0,1,2,3" newline bitfld.word 0x0 5. "LPD,Override value for tx_lpd" "0,1" newline bitfld.word 0x0 4. "REQ,Override value for tx_req" "0,1" newline bitfld.word 0x0 3. "DAT_EN,Override value for tx_data_en" "0,1" newline bitfld.word 0x0 2. "INVERT,Override value for tx_invert" "0,1" newline bitfld.word 0x0 1. "RESET,Override value for tx_reset" "0,1" newline bitfld.word 0x0 0. "CLK_RDY,Override value for tx_clk_rdy" "0,1" group.word 0x60008++0x1 line.word 0x0 "L0_ASIC_TX_OVRD_IN_1,Override values for incoming TX drive controls from ASIC. register #1" bitfld.word 0x0 15. "MAIN_OVRD_EN,Enable override values for TX EQ main input" "0,1" newline hexmask.word.byte 0x0 9.--14. 1. "TX_MAIN_CURSOR,Override value for tx_eq_main" newline bitfld.word 0x0 8. "EN,Enable override values for inputs below controlled by this register" "0,1" newline bitfld.word 0x0 7. "VBST_EN,Override value for tx_vboost_en" "0,1" newline hexmask.word.byte 0x0 3.--6. 1. "IBST_LVL,Override value for tx_iboost_lvl" newline bitfld.word 0x0 2. "BEACON_EN,Override value for tx_beacon_en" "0,1" newline bitfld.word 0x0 1. "DIS,Override value for tx_disable" "0,1" newline bitfld.word 0x0 0. "NYQUIST_DAT,Override incoming data to nyquist" "0,1" group.word 0x6000C++0x1 line.word 0x0 "L0_ASIC_TX_OVRD_IN_2,Override values for incoming TX drive controls from ASIC. register #2" bitfld.word 0x0 13. "POST_OVRD_EN,Enable override values for TX EQ post input" "0,1" newline hexmask.word.byte 0x0 7.--12. 1. "TX_POST_CURSOR,Override value for tx_eq_post" newline bitfld.word 0x0 6. "PRE_OVRD_EN,Enable override values for TX EQ pre input" "0,1" newline hexmask.word.byte 0x0 0.--5. 1. "TX_PRE_CURSOR,Override value for tx_eq_pre" group.word 0x60010++0x1 line.word 0x0 "L0_ASIC_TX_OVRD_OUT,Override values for outgoing TX controls to ASIC" bitfld.word 0x0 3. "EN_DETRX_RESULT,Enable for override value for tx_detrx_result" "0,1" newline bitfld.word 0x0 2. "DETRX_RESULT,Override value for tx_detrx_result" "0,1" newline bitfld.word 0x0 1. "EN_TX_ACK,Enable for override value for tx_ack" "0,1" newline bitfld.word 0x0 0. "TX_ACK,Override value for tx_ack" "0,1" group.word 0x60014++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_IN_0,Override values for incoming RX controls from ASIC. register #0" bitfld.word 0x0 13. "EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 12. "RX_DFE_BYP,Override value for rx_dfe_bypass" "0,1" newline bitfld.word 0x0 11. "DIV16P5_CLK_EN,Override value for rx_div16p5_clk_en" "0,1" newline bitfld.word 0x0 9.--10. "WIDTH,Override value for rx_width" "0,1,2,3" newline bitfld.word 0x0 7.--8. "RATE,Override value for rx_rate" "0,1,2,3" newline bitfld.word 0x0 5.--6. "PSTATE,Override value for rx_pstate" "0,1,2,3" newline bitfld.word 0x0 4. "LPD,Override value for rx_lpd" "0,1" newline bitfld.word 0x0 3. "REQ,Override value for rx_req" "0,1" newline bitfld.word 0x0 2. "DAT_EN,Override value for rx_data_en" "0,1" newline bitfld.word 0x0 1. "INVERT,Override value for rx_invert" "0,1" newline bitfld.word 0x0 0. "RESET,Override value for rx_reset" "0,1" group.word 0x60018++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_IN_1,Override values for incoming RX controls from ASIC. register #1" bitfld.word 0x0 11. "RX_CDR_VCO_STP_CTRL,override value for rx_cdr_vco_step_ctrl" "0,1" newline bitfld.word 0x0 10. "RX_CDR_VCO_TMP_CMP_EN,override value for rx_cdr_vco_temp_comp_en" "0,1" newline bitfld.word 0x0 9. "EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 7.--8. "RX_CDR_VCO_FBAND_1_0,Override value for rx_cdr_vco_freqband" "0,1,2,3" newline hexmask.word.byte 0x0 0.--6. 1. "RX_REF_LD_VAL,Override value for rx_ref_ld_val[6:0]" group.word 0x6001C++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_IN_2,Override values for incoming RX controls from ASIC. register #2" bitfld.word 0x0 13. "EN,Enable override values for all inputs controlled by this register" "0,1" newline hexmask.word 0x0 0.--12. 1. "RX_VCO_LD_VAL,Override value for rx_vco_ld_val" group.word 0x60020++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_IN_3,Override values for incoming RX controls from ASIC. register #3" bitfld.word 0x0 11. "EN,Enable override values for all inputs controlled by this register" "0,1" newline bitfld.word 0x0 10. "TERM_ACDC,Override value for rx_term_acdc" "0,1" newline bitfld.word 0x0 9. "TERM_EN,Override value for rx_term_en" "0,1" newline bitfld.word 0x0 8. "LOS_LPFS_EN,Override value for rx_los_lfps_en" "0,1" newline bitfld.word 0x0 5.--7. "LOS_THR,Override value for rx_los_threshold" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "DIS,Override value for rx_disable" "0,1" newline bitfld.word 0x0 3. "CLK_SHIFT,Override value for rx_clk_shift" "0,1" newline bitfld.word 0x0 2. "ALIGN_EN,Override value for rx_align_en" "0,1" newline bitfld.word 0x0 1. "CDR_SSC_EN,Override value for rx_cdr_ssc_en" "0,1" newline bitfld.word 0x0 0. "CDR_TRACK_EN,Override value for rx_cdr_track_en" "0,1" group.word 0x60024++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_EQ_IN_0,Override values for incoming RX EQ controls from ASIC. register #0" hexmask.word.byte 0x0 9.--13. 1. "EQ_CTLE_BST,Override value for rx_eq_ctle_boost" newline bitfld.word 0x0 6.--8. "EQ_VGA2_G,Override value for rx_eq_vga2_gain" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "EQ_VGA1_G,Override value for rx_eq_vga1_gain" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "EQ_ATT_LVL,Override value for rx_eq_att_lvl" "0,1,2,3,4,5,6,7" group.word 0x60028++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_EQ_IN_1,Override values for incoming RX EQ controls from ASIC. register #1" bitfld.word 0x0 10. "EQ_OVRD_EN,Enable override value for rx_eq_* inputs" "0,1" newline hexmask.word.byte 0x0 2.--9. 1. "EQ_DFE_TAP1,Override value for rx_eq_dfe_tap1" newline bitfld.word 0x0 0.--1. "EQ_CTLE_POLE,Override value for rx_eq_ctle_pole" "0,1,2,3" group.word 0x6002C++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_OUT_0,Override values for outgoing RX controls to ASIC. register #0" bitfld.word 0x0 4. "EN_CTL,Enable override values for all control outputs of this register" "0,1" newline bitfld.word 0x0 2.--3. "ADPT_STS,Override value for rx_adapt_sts" "0,1,2,3" newline bitfld.word 0x0 1. "LOS,Override value for rx_los" "0,1" newline bitfld.word 0x0 0. "ACK,Override value for rx_ack" "0,1" rgroup.word 0x60030++0x1 line.word 0x0 "L0_ASIC_L_ASIC_IN,Current values for incoming LANE controls from ASIC" bitfld.word 0x0 1. "LANE_RX2TX_PAR_LB,Value from ASIC for lane_rx2tx_par_lb_en_r" "0,1" newline bitfld.word 0x0 0. "LANE_TX2RX_SER_LB,Value from ASIC for lane_tx2rx_ser_lb_en_r" "0,1" rgroup.word 0x60034++0x1 line.word 0x0 "L0_ASIC_TX_ASIC_IN_0,Current values for incoming TX controls from ASIC. register #0" bitfld.word 0x0 15. "DIS,Value from ASIC for tx_disable" "0,1" newline bitfld.word 0x0 14. "DETECT_RX_REQ,Value from ASIC for tx_detrx_req" "0,1" newline bitfld.word 0x0 13. "MPLLB_SEL,Value from ASIC for tx_mpllb_sel" "0,1" newline bitfld.word 0x0 11.--12. "WIDTH,Value from ASIC for tx_width[1:0]" "0,1,2,3" newline bitfld.word 0x0 8.--10. "RATE,Value from ASIC for tx_rate[2:0]" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 6.--7. "PSTATE,Value from ASIC for tx_pstate[1:0]" "0,1,2,3" newline bitfld.word 0x0 5. "LPD,Value from ASIC for tx_lpd" "0,1" newline bitfld.word 0x0 4. "REQ,Value from ASIC for tx_req" "0,1" newline bitfld.word 0x0 3. "DAT_EN,Value from ASIC for tx_data_en" "0,1" newline bitfld.word 0x0 2. "INVERT,Value from ASIC for tx_invert" "0,1" newline bitfld.word 0x0 1. "RESET,Value from ASIC for tx_reset" "0,1" newline bitfld.word 0x0 0. "CLK_RDY,Value from ASIC for tx_clk_rdy" "0,1" rgroup.word 0x60038++0x1 line.word 0x0 "L0_ASIC_TX_ASIC_IN_1,Current values for incoming TX controls from ASIC. register #1" hexmask.word.byte 0x0 6.--11. 1. "TX_MAIN_CURSOR,Value from ASIC for tx_eq_main" newline bitfld.word 0x0 5. "VBST_EN,Value from ASIC for tx_vboost_en" "0,1" newline hexmask.word.byte 0x0 1.--4. 1. "IBST_LVL,Value from ASIC for tx_iboost_lvl" newline bitfld.word 0x0 0. "BEACON_EN,Value from ASIC for tx_beacon_en" "0,1" rgroup.word 0x6003C++0x1 line.word 0x0 "L0_ASIC_TX_ASIC_IN_2,Current values for incoming TX controls from ASIC. register #2" hexmask.word.byte 0x0 6.--11. 1. "TX_POST_CURSOR,Value from ASIC for tx_eq_post" newline hexmask.word.byte 0x0 0.--5. 1. "TX_PRE_CURSOR,Value from ASIC for tx_eq_pre" rgroup.word 0x60040++0x1 line.word 0x0 "L0_ASIC_TX_ASIC_OUT,Current values for outgoing TX status controls from PHY" bitfld.word 0x0 1. "DETRX_RESULT,Value from PHY for tx_detrx_result" "0,1" newline bitfld.word 0x0 0. "TX_ACK,Value from PHY for tx_ack" "0,1" rgroup.word 0x60044++0x1 line.word 0x0 "L0_ASIC_RX_ASIC_IN_0,Current values for incoming RX controls from ASIC. register #0" bitfld.word 0x0 13. "CDR_TRACK_EN,Value from ASIC for rx_cdr_track_en" "0,1" newline bitfld.word 0x0 12. "RX_DFE_BYP,Value from ASIC for rx_dfe_bypass" "0,1" newline bitfld.word 0x0 11. "DIV16P5_CLK_EN,Value from ASIC for rx_div16p5_clk_en" "0,1" newline bitfld.word 0x0 9.--10. "WIDTH,Value from ASIC for rx_width" "0,1,2,3" newline bitfld.word 0x0 7.--8. "RATE,Value from ASIC for rx_rate" "0,1,2,3" newline bitfld.word 0x0 5.--6. "PSTATE,Value from ASIC for rx_pstate" "0,1,2,3" newline bitfld.word 0x0 4. "LPD,Value from ASIC for rx_lpd" "0,1" newline bitfld.word 0x0 3. "REQ,Value from ASIC for rx_req" "0,1" newline bitfld.word 0x0 2. "DAT_EN,Value from ASIC for rx_data_en" "0,1" newline bitfld.word 0x0 1. "INVERT,Value from ASIC for rx_invert" "0,1" newline bitfld.word 0x0 0. "RESET,Value from ASIC for rx_reset" "0,1" rgroup.word 0x60048++0x1 line.word 0x0 "L0_ASIC_RX_ASIC_IN_1,Current values for incoming RX controls from ASIC. register #1" bitfld.word 0x0 9. "RX_TERM_ACDC,Value from ASIC for rx_term_acdc" "0,1" newline bitfld.word 0x0 8. "RX_TERM_EN,Value from ASIC for rx_term_en" "0,1" newline bitfld.word 0x0 7. "LOS_LPFS_EN,Value from ASIC for rx_los_lfps_en" "0,1" newline bitfld.word 0x0 4.--6. "LOS_THR,Value from ASIC for rx_los_threshold" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3. "DIS,Value from ASIC for rx_disable" "0,1" newline bitfld.word 0x0 2. "CLK_SHIFT,Value from ASIC for rx_clk_shift" "0,1" newline bitfld.word 0x0 1. "ALIGN_EN,Value from ASIC for rx_align_en" "0,1" newline bitfld.word 0x0 0. "CDR_SSC_EN,Value from ASIC for rx_cdr_ssc_en" "0,1" rgroup.word 0x6004C++0x1 line.word 0x0 "L0_ASIC_RX_EQ_ASIC_IN_0,Current values for incoming RX EQ controls from ASIC. register #0" hexmask.word.byte 0x0 9.--13. 1. "EQ_CTLE_BST,Value from ASIC for rx_eq_ctle_boost" newline bitfld.word 0x0 6.--8. "EQ_VGA2_G,Value from ASIC for rx_eq_vga2_gain" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "EQ_VGA1_G,Value from ASIC for rx_eq_vga1_gain" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "EQ_ATT_LVL,Value from ASIC for rx_eq_att_lvl" "0,1,2,3,4,5,6,7" rgroup.word 0x60050++0x1 line.word 0x0 "L0_ASIC_RX_EQ_ASIC_IN_1,Current values for incoming RX EQ controls from ASIC. register #1" hexmask.word.byte 0x0 2.--9. 1. "EQ_DFE_TAP1,Value from ASIC for rx_eq_dfe_tap1" newline bitfld.word 0x0 0.--1. "EQ_CTLE_POLE,Value from ASIC for rx_eq_ctle_pole" "0,1,2,3" rgroup.word 0x60054++0x1 line.word 0x0 "L0_ASIC_RX_CDR_VCO_ASIC_IN_0,Current values for incoming RX CDR VCO controls from ASIC. register #0" hexmask.word.byte 0x0 4.--10. 1. "RX_REF_LD_VAL,Value from ASIC for rx_ref_ld_val" newline bitfld.word 0x0 2.--3. "RX_CDR_VCO_FBAND,Value from ASIC for rx_cdr_vco_freqband" "0,1,2,3" newline bitfld.word 0x0 1. "RX_CDR_VCO_STP_CTRL,Value from ASIC for rx_cdr_vco_step_ctrl" "0,1" newline bitfld.word 0x0 0. "RX_CDR_VCO_TMP_CMP_EN,Value from ASIC for rx_cdr_vco_temp_comp_en" "0,1" rgroup.word 0x60058++0x1 line.word 0x0 "L0_ASIC_RX_CDR_VCO_ASIC_IN_1,Current values for incoming RX CDR VCO controls from ASIC. register #1" hexmask.word 0x0 0.--12. 1. "RX_VCO_LD_VAL,Value from ASIC for rx_vco_ld_val" rgroup.word 0x6005C++0x1 line.word 0x0 "L0_ASIC_RX_ASIC_OUT_0,Current values for outgoing RX status controls from PHY. register #0" bitfld.word 0x0 3.--4. "ADPT_STS,Value from PHY for rx_adapt_sts" "0,1,2,3" newline bitfld.word 0x0 2. "VALID,Value from PHY for rx_valid" "0,1" newline bitfld.word 0x0 1. "LOS,Value from PHY for rx_los" "0,1" newline bitfld.word 0x0 0. "ACK,Value from PHY for rx_ack" "0,1" group.word 0x60060++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_EQ_IN_2,Override values for incoming RX EQ controls from ASIC. register #2" hexmask.word.byte 0x0 7.--13. 1. "EQ_DFE_TAP3,Override value for rx_eq_dfe_tap3" newline hexmask.word.byte 0x0 0.--6. 1. "EQ_DFE_TAP2,Override value for rx_eq_dfe_tap2" group.word 0x60064++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_EQ_IN_3,Override values for incoming RX EQ controls from ASIC. register #3" hexmask.word.byte 0x0 7.--13. 1. "EQ_DFE_TAP5,Override value for rx_eq_dfe_tap5" newline hexmask.word.byte 0x0 0.--6. 1. "EQ_DFE_TAP4,Override value for rx_eq_dfe_tap4" group.word 0x60068++0x1 line.word 0x0 "L0_ASIC_TX_OVRD_MISC,Override values for incoming TX MISC BUS from ASIC" bitfld.word 0x0 8. "TX_MISC_OVRD_EN,Override Enable for tx_misc[7:0]" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "TX_MISC_OVRD_VAL,Override value for tx_misc[7:0]" group.word 0x6006C++0x1 line.word 0x0 "L0_ASIC_RX_OVRD_MISC,Override values for incoming RX MISC BUS from ASIC" bitfld.word 0x0 8. "RX_MISC_OVRD_EN,Override Enable for rx_misc[7:0]" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "RX_MISC_OVRD_VAL,Override value for rx_misc[7:0]" group.word 0x60070++0x1 line.word 0x0 "L0_TX_PSTATE_P0,TX Power State Control Register for P0" bitfld.word 0x0 8. "TX_P0_ALL_RXDET,If asserted then rxdet request is allowed in P0" "0,1" newline bitfld.word 0x0 7. "TX_P0_DAT_EN,This is ANDed with top-level tx_data_en asic input" "0,1" newline bitfld.word 0x0 6. "TX_P0_DIG_CLK_EN,Enable/Disable TX digital clocks in P0" "0,1" newline bitfld.word 0x0 5. "TX_P0_ANA_SERIAL_EN,Value of TX ana serial_en in P0" "0,1" newline bitfld.word 0x0 4. "TX_P0_ANA_RESET,Value of TX ana reset in P0" "0,1" newline bitfld.word 0x0 3. "TX_P0_ANA_WORD_CLK_EN,Value of TX ana word_clk_en in P0" "0,1" newline bitfld.word 0x0 2. "TX_P0_ANA_CLK_EN,Value of TX ana clk_en in P0" "0,1" newline bitfld.word 0x0 1. "TX_P0_ANA_VCM_HOLD,Value of TX ana vcm_hold in P0" "0,1" newline bitfld.word 0x0 0. "TX_P0_ANA_REFGEN_EN,Value of TX ana refgen_en in P0" "0,1" group.word 0x60074++0x1 line.word 0x0 "L0_TX_PSTATE_P0S,TX Power State Control Register for P0S" bitfld.word 0x0 8. "TX_P0S_ALL_RXDET,If asserted then rxdet request is allowed in P0S" "0,1" newline bitfld.word 0x0 7. "TX_P0S_DAT_EN,This is ANDed with top-level tx_data_en asic input" "0,1" newline bitfld.word 0x0 6. "TX_P0S_DIG_CLK_EN,Enable/Disable TX digital clocks in P0S" "0,1" newline bitfld.word 0x0 5. "TX_P0S_ANA_SERIAL_EN,Value of TX ana serial_en in P0S" "0,1" newline bitfld.word 0x0 4. "TX_P0S_ANA_RESET,Value of TX ana reset in P0S" "0,1" newline bitfld.word 0x0 3. "TX_P0S_ANA_WORD_CLK_EN,Value of TX ana word_clk_en in P0S" "0,1" newline bitfld.word 0x0 2. "TX_P0S_ANA_CLK_EN,Value of TX ana clk_en in P0S" "0,1" newline bitfld.word 0x0 1. "TX_P0S_ANA_VCM_HOLD,Value of TX ana vcm_hold in P0S" "0,1" newline bitfld.word 0x0 0. "TX_P0S_ANA_REFGEN_EN,Value of TX ana refgen_en in P0S" "0,1" group.word 0x60078++0x1 line.word 0x0 "L0_TX_PSTATE_P1,TX Power State Control Register for P1" bitfld.word 0x0 8. "TX_P1_ALL_RXDET,If asserted then rxdet request is allowed in P1" "0,1" newline bitfld.word 0x0 7. "TX_P1_DAT_EN,This is ANDed with top-level tx_data_en asic input" "0,1" newline bitfld.word 0x0 6. "TX_P1_DIG_CLK_EN,Enable/Disable TX digital clocks in P1" "0,1" newline bitfld.word 0x0 5. "TX_P1_ANA_SERIAL_EN,Value of TX ana serial_en in P1" "0,1" newline bitfld.word 0x0 4. "TX_P1_ANA_RESET,Value of TX ana reset in P1" "0,1" newline bitfld.word 0x0 3. "TX_P1_ANA_WORD_CLK_EN,Value of TX ana word_clk_en in P1" "0,1" newline bitfld.word 0x0 2. "TX_P1_ANA_CLK_EN,Value of TX ana clk_en in P1" "0,1" newline bitfld.word 0x0 1. "TX_P1_ANA_VCM_HOLD,Value of TX ana vcm_hold in P1" "0,1" newline bitfld.word 0x0 0. "TX_P1_ANA_REFGEN_EN,Value of TX ana refgen_en in P1" "0,1" group.word 0x6007C++0x1 line.word 0x0 "L0_TX_PSTATE_P2,TX Power State Control Register for P2" bitfld.word 0x0 8. "TX_P2_ALL_RXDET,If asserted then rxdet request is allowed" "0,1" newline bitfld.word 0x0 7. "TX_P2_DAT_EN,This is ANDed with top-level tx_data_en asic input" "0,1" newline bitfld.word 0x0 6. "TX_P2_DIG_CLK_EN,Enable/Disable TX digital clocks in P2" "0,1" newline bitfld.word 0x0 5. "TX_P2_ANA_SERIAL_EN,Value of TX ana serial_en in P2" "0,1" newline bitfld.word 0x0 4. "TX_P2_ANA_RESET,Value of TX ana reset in P2" "0,1" newline bitfld.word 0x0 3. "TX_P2_ANA_WORD_CLK_EN,Value of TX ana word_clk_en in P2" "0,1" newline bitfld.word 0x0 2. "TX_P2_ANA_CLK_EN,Value of TX ana clk_en in P2" "0,1" newline bitfld.word 0x0 1. "TX_P2_ANA_VCM_HOLD,Value of TX ana vcm_hold in P2" "0,1" newline bitfld.word 0x0 0. "TX_P2_ANA_REFGEN_EN,Value of TX ana refgen_en in P2" "0,1" group.word 0x60080++0x1 line.word 0x0 "L0_TX_PU_T_0,TX Power UP Time Register #0" hexmask.word.byte 0x0 8.--15. 1. "TX_CLK_EN,Power up time (in ref_range cycles) for TX ana clock enable (spec: >=1us)" newline hexmask.word.byte 0x0 0.--7. 1. "TX_REFGEN_EN_T,Power up time (in ref_range cycles) for TX ana refgen enable (spec: >=1us)" group.word 0x60084++0x1 line.word 0x0 "L0_TX_PU_T_1,TX Power UP Time Register #1" bitfld.word 0x0 15. "SKIP_TX_VCM_HOLD_WAIT,Skip wait for TX common mode hold power up" "0,1" newline hexmask.word 0x0 0.--14. 1. "TX_VCM_HOLD_T,Power up time (in ref_range cycles) for TX ana vreg enable (spec: >=800us)" group.word 0x60088++0x1 line.word 0x0 "L0_TX_PU_T_2,TX Power UP Time Register #2" bitfld.word 0x0 13.--15. "DTB_SEL,Selects data to drive on DTB" "0,1,2,3,4,5,6,7" newline hexmask.word 0x0 0.--12. 1. "TX_VBST_DIS_T,TX vboost disable time (in ref_range cycles) (spec: >=160us)" group.word 0x6008C++0x1 line.word 0x0 "L0_TX_PU_T_3,TX Power UP Time Register #3" bitfld.word 0x0 11.--12. "TX_RESET_T,TX Reset deassertion time (in ref_range cycles) (spec: >=50ns)" "0,1,2,3" newline bitfld.word 0x0 10. "FST_TX_RXDET,Enable fast TX RX-detection (simulation only)" "0,1" newline hexmask.word 0x0 0.--9. 1. "TX_RXDET_T,RX Detect up time (in ref_range cycles) starting from asserting rxdet_en (spec: 12us < time < 26us)" group.word 0x60090++0x1 line.word 0x0 "L0_TX_PU_T_4,TX Power UP Time Register #4" hexmask.word.byte 0x0 0.--4. 1. "TX_SERIAL_EN_T,Power up time (in ref_range cycles) for TX ana serial enable (spec: 130ns < time < 1us)" group.word 0x60094++0x1 line.word 0x0 "L0_TX_FIFO_BYP,TX fifo bypass Register" bitfld.word 0x0 0. "TX_FIFO_BYP,By-pass TX datapath FIFO" "0,1" group.word 0x60098++0x1 line.word 0x0 "L0_TX_PU_T_5,TX Power UP Time Register #4" hexmask.word 0x0 0.--14. 1. "TX_VCM_HOLD_GS_T,TX common mode gear-shift time (in ref range cycles) (spec: >=400us)" group.word 0x6009C++0x1 line.word 0x0 "L0_DIG_TX_LBERT_CTL,Pattern Generator controls" hexmask.word 0x0 5.--14. 1. "PAT0,Pattern for modes 3-5" newline bitfld.word 0x0 4. "TRIGGER_ERR,Insert a single error into a lsb Any write of a 1 to this bit will insert an error" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "MODE,Pattern to generate When changing modes you must change to disabled first" group.word 0x600A0++0x1 line.word 0x0 "L0_RX_PSTATE_P0,RX Power State Control Register for P0" bitfld.word 0x0 12. "RX_P0_FORCE_DFE_BYP,Enable/Disable RX DFE in P0" "0,1" newline bitfld.word 0x0 11. "RX_P0_DIG_CLK_EN,Enable/Disable RX digital clocks in P0" "0,1" newline bitfld.word 0x0 10. "RX_P0_VCO_CONTCAL_EN,Enable/Disable continous calibration of the RX VCO in P0" "0,1" newline bitfld.word 0x0 9. "RX_P0_VCO_CAL_RST,Enable/Disable resetting the RX VCO in P0" "0,1" newline bitfld.word 0x0 8. "RX_P0_VCO_F_RST,Enable/Disable resetting the RX VCO frequency in P0" "0,1" newline bitfld.word 0x0 7. "RX_P0_ANA_CDR_EN,Value of RX ana cdr_en in P0" "0,1" newline bitfld.word 0x0 6. "RX_P0_ANA_DESER_EN,Value of RX ana deserial_en in P0" "0,1" newline bitfld.word 0x0 5. "RX_P0_ANA_CLK_DCC_EN,Value of RX ana CLK_DCC_EN in P0" "0,1" newline bitfld.word 0x0 4. "RX_P0_ANA_CLK_EN,Value of RX ana clk_en in P0" "0,1" newline bitfld.word 0x0 3. "RX_P0_ANA_DIV16P5_CLK_EN,Value of RX ana div16p5_clk_en in P0" "0,1" newline bitfld.word 0x0 2. "RX_P0_ANA_CLK_VREG_EN,Value of RX ana clk_vreg_en in P0" "0,1" newline bitfld.word 0x0 1. "RX_P0_ANA_AFE_EN,Value of RX ana afe_en in P0" "0,1" newline bitfld.word 0x0 0. "RX_P0_ANA_LOS_EN,Value of RX ana los_en in P0" "0,1" group.word 0x600A4++0x1 line.word 0x0 "L0_RX_PSTATE_P0S,RX Power State Control Register for P0S" bitfld.word 0x0 12. "RX_P0s_FORCE_DFE_BYP,Enable/Disable RX DFE in P0s" "0,1" newline bitfld.word 0x0 11. "RX_P0S_DIG_CLK_EN,Enable/Disable RX digital clocks in P0S" "0,1" newline bitfld.word 0x0 10. "RX_P0S_VCO_CONTCAL_EN,Enable/Disable continous calibration of the RX VCO in P0S" "0,1" newline bitfld.word 0x0 9. "RX_P0S_VCO_CAL_RST,Enable/Disable resetting the RX VCO in P0S" "0,1" newline bitfld.word 0x0 8. "RX_P0S_VCO_F_RST,Enable/Disable resetting the RX VCO frequency in P0S" "0,1" newline bitfld.word 0x0 7. "RX_P0S_ANA_CDR_EN,Value of RX ana cdr_en in P0S" "0,1" newline bitfld.word 0x0 6. "RX_P0S_ANA_DESER_EN,Value of RX ana deserial_en in P0S" "0,1" newline bitfld.word 0x0 5. "RX_P0S_ANA_CLK_DCC_EN,Value of RX ana CLK_DCC_EN in P0S" "0,1" newline bitfld.word 0x0 4. "RX_P0S_ANA_CLK_EN,Value of RX ana clk_en in P0S" "0,1" newline bitfld.word 0x0 3. "RX_P0S_ANA_DIV16P5_CLK_EN,Value of RX ana div16p5_clk_en in P0S" "0,1" newline bitfld.word 0x0 2. "RX_P0S_ANA_CLK_VREG_EN,Value of RX ana clk_vreg_en in P0S" "0,1" newline bitfld.word 0x0 1. "RX_P0S_ANA_AFE_EN,Value of RX ana afe_en in P0S" "0,1" newline bitfld.word 0x0 0. "RX_P0S_ANA_LOS_EN,Value of RX ana los_en in P0S" "0,1" group.word 0x600A8++0x1 line.word 0x0 "L0_RX_PSTATE_P1,RX Power State Control Register for P1" bitfld.word 0x0 12. "RX_P1_FORCE_DFE_BYP,Enable/Disable RX DFE in P1" "0,1" newline bitfld.word 0x0 11. "RX_P1_DIG_CLK_EN,Enable/Disable RX digital clocks in P1" "0,1" newline bitfld.word 0x0 10. "RX_P1_VCO_CONTCAL_EN,Enable/Disable continous calibration of the RX VCO in P1" "0,1" newline bitfld.word 0x0 9. "RX_P1_VCO_CAL_RST,Enable/Disable resetting the RX VCO in P1" "0,1" newline bitfld.word 0x0 8. "RX_P1_VCO_F_RST,Enable/Disable resetting the RX VCO frequency in P1" "0,1" newline bitfld.word 0x0 7. "RX_P1_ANA_CDR_EN,Value of RX ana cdr_en in P1" "0,1" newline bitfld.word 0x0 6. "RX_P1_ANA_DESER_EN,Value of RX ana deserial_en in P1" "0,1" newline bitfld.word 0x0 5. "RX_P1_ANA_CLK_DCC_EN,Value of RX ana CLK_DCC_EN in P1" "0,1" newline bitfld.word 0x0 4. "RX_P1_ANA_CLK_EN,Value of RX ana clk_en in P1" "0,1" newline bitfld.word 0x0 3. "RX_P1_ANA_DIV16P5_CLK_EN,Value of RX ana div16p5_clk_en in P1" "0,1" newline bitfld.word 0x0 2. "RX_P1_ANA_CLK_VREG_EN,Value of RX ana clk_vreg_en in P1" "0,1" newline bitfld.word 0x0 1. "RX_P1_ANA_AFE_EN,Value of RX ana afe_en in P1" "0,1" newline bitfld.word 0x0 0. "RX_P1_ANA_LOS_EN,Value of RX ana los_en in P1" "0,1" group.word 0x600AC++0x1 line.word 0x0 "L0_RX_PSTATE_P2,RX Power State Control Register for P2" bitfld.word 0x0 12. "RX_P2_FORCE_DFE_BYP,Enable/Disable RX DFE in P2" "0,1" newline bitfld.word 0x0 11. "RX_P2_DIG_CLK_EN,Enable/Disable RX digital clocks in P2" "0,1" newline bitfld.word 0x0 10. "RX_P2_VCO_CONTCAL_EN,Enable/Disable continous calibration of the RX VCO in P2" "0,1" newline bitfld.word 0x0 9. "RX_P2_VCO_CAL_RST,Enable/Disable resetting the RX VCO in P2" "0,1" newline bitfld.word 0x0 8. "RX_P2_VCO_F_RST,Enable/Disable resetting the RX VCO frequency in P2" "0,1" newline bitfld.word 0x0 7. "RX_P2_ANA_CDR_EN,Value of RX ana cdr_en in P2" "0,1" newline bitfld.word 0x0 6. "RX_P2_ANA_DESER_EN,Value of RX ana deserial_en in P2" "0,1" newline bitfld.word 0x0 5. "RX_P2_ANA_CLK_DCC_EN,Value of RX ana CLK_DCC_EN in P2" "0,1" newline bitfld.word 0x0 4. "RX_P2_ANA_CLK_EN,Value of RX ana clk_en in P2" "0,1" newline bitfld.word 0x0 3. "RX_P2_ANA_DIV16P5_CLK_EN,Value of RX ana div16p5_clk_en in P2" "0,1" newline bitfld.word 0x0 2. "RX_P2_ANA_CLK_VREG_EN,Value of RX ana clk_vreg_en in P2" "0,1" newline bitfld.word 0x0 1. "RX_P2_ANA_AFE_EN,Value of RX ana afe_en in P2" "0,1" newline bitfld.word 0x0 0. "RX_P2_ANA_LOS_EN,Value of RX ana los_en in P2" "0,1" group.word 0x600B0++0x1 line.word 0x0 "L0_RX_PU_T_0,RX Power UP Time Register #0" bitfld.word 0x0 10. "FST_RX_LOS_EN_WAIT,Enable Fast wait for RX LOS enable (simulation Only)" "0,1" newline hexmask.word 0x0 0.--9. 1. "RX_LOS_EN_T,Power up time (in ref_range cycles) for RX ana los enable (spec >=1." group.word 0x600B4++0x1 line.word 0x0 "L0_RX_PU_T_1,RX Power UP Time Register #1" bitfld.word 0x0 9. "FST_RX_VREG_EN,Enable fast RX VREG enable (simulation only)" "0,1" newline hexmask.word.byte 0x0 2.--8. 1. "RX_VREG_EN_T,Power up time (in ref_range cycles divided by 2) for RX ana vreg enable (spec >2us)" newline bitfld.word 0x0 0.--1. "RX_RATE_T,Power up time (in ref_range cycles) for RX ana rate or width change" "0,1,2,3" group.word 0x600B8++0x1 line.word 0x0 "L0_RX_PU_T_2,RX Power UP Time Register #2" bitfld.word 0x0 7.--8. "RX_DESER_DIS_T,Power down time in (ref_range cycles) for RX ana deserial enable" "0,1,2,3" newline bitfld.word 0x0 5.--6. "RX_DESER_EN_T,Power up time (in ref_range cycles) for RX ana deserial enable" "0,1,2,3" newline hexmask.word.byte 0x0 0.--4. 1. "RX_CDR_EN_T,Power up time (in ref_range cycles) for RX ana cdr (or dfe/dfe_taps) enable (spec 200ns)" group.word 0x600BC++0x1 line.word 0x0 "L0_RX_PU_T_3,RX Power UP Control Register #0" bitfld.word 0x0 10. "FST_RX_CLK_DCC_EN,Enable fast RX clock dcc enable (simulation only)" "0,1" newline hexmask.word 0x0 0.--9. 1. "RX_CLK_DCC_EN_T,Power up time (in ref_range cycles) for RX ana clk dcc enable (spec >1us)" group.word 0x600C0++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_CAL_CTRL_0,RX VCO calibration controls register #0" bitfld.word 0x0 0.--2. "INT_G_CAL_BNCE_CNT,Number of bounces (i." "0,1,2,3,4,5,6,7" group.word 0x600C4++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_CAL_CTRL_1,RX VCO calibration controls register #1" hexmask.word.byte 0x0 9.--15. 1. "DTB_SEL,DTB select for RX VCO dtb signals" newline hexmask.word.byte 0x0 5.--8. 1. "DPLL_CAL_UG,DPLL calibration update on int_gain code" newline bitfld.word 0x0 4. "DIS_INT_CAL_MODE,When asserted then the DPLL frequency register is never modified by the RX VCO calibration FSM (even if DPLL_CAL_UG is non-zero)." "0,1" newline bitfld.word 0x0 3. "RX_VCO_CONTCAL_EN,Override value for the continous calibration enable from the RX PWRSM" "0,1" newline bitfld.word 0x0 2. "RX_VCO_CAL_RST,Override value for the calibration reset from the RX PWRSM" "0,1" newline bitfld.word 0x0 1. "RX_VCO_F_RST,Override value for the frequency reset from the RX PWRSM" "0,1" newline bitfld.word 0x0 0. "RX_VCO_OVRD_SEL,Override the calibration controls from the RX PWRSM" "0,1" group.word 0x600C8++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_CAL_CTRL_2,RX VCO calibration controls register #2" hexmask.word.byte 0x0 10.--13. 1. "FREG_TN_CAL_STPS,Number of cal steps of freq tune" newline hexmask.word 0x0 0.--9. 1. "FREG_TN_START_VAL,Starting value of freq tune code" group.word 0x600CC++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_CAL_T_0,RX Power UP Time Register #0" bitfld.word 0x0 12. "FST_RX_VCO_WAIT,Enable fast RX VCO wait times (simulation only)" "0,1" newline hexmask.word.byte 0x0 4.--11. 1. "RX_VCO_CNTR_PU_T,Power up time for Rx ana vco cnter (spec: >2us)" newline hexmask.word.byte 0x0 0.--3. 1. "RX_VCO_UPD_T,Settle time in (ref_range cycles) for RX ana vco update (freq_tune or int_gain) (spec >350ns)" group.word 0x600D0++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_CAL_T_1,RX Power UP Time Register #1" hexmask.word.byte 0x0 4.--10. 1. "RX_VCO_SU_T,Power up time in ref_range cycles for RX ana vco startup (spec >250ns)" newline bitfld.word 0x0 3. "FST_RX_VCO_CAL,Enable fast RX VCO calibration (skips calibration) (simulation only)" "0,1" newline bitfld.word 0x0 0.--2. "RX_VCO_CNTR_STTL_T,RX VCO counter value settling time in (ref_dig_clk cycles) (spec: 1 ref_dig_clk cycle)" "0,1,2,3,4,5,6,7" rgroup.word 0x600D4++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_STAT_0,RX VCO status register #0" bitfld.word 0x0 14. "RX_ANA_CLK_EN,Current value of rx_ana_clk_en_i" "0,1" newline bitfld.word 0x0 13. "RX_ANA_CDR_VCO_EN,Current value of rx_ana_cdr_vco_en_i" "0,1" newline bitfld.word 0x0 12. "RX_ANA_CDR_SU,Current value of rx_ana_cdr_startup_i" "0,1" newline bitfld.word 0x0 11. "RX_ANA_VCO_CNTR_EN,Current value of rx_ana_vco_cntr_en_i" "0,1" newline bitfld.word 0x0 10. "RX_ANA_VCO_CNTR_PD,Current value of rx_ana_vco_cntr_pd_i" "0,1" newline hexmask.word 0x0 0.--9. 1. "RX_ANA_CDR_F_TN,Current value of rx_ana_cdr_freq_tune_i" rgroup.word 0x600D8++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_STAT_1,RX VCO status register #1" bitfld.word 0x0 8. "DPLL_F_RST,Indicates that the RX integral frequency is reset or not" "0,1" newline bitfld.word 0x0 7. "RX_VCO_CAL_DN,Indicates that the RX VCO has completed calibration" "0,1" newline bitfld.word 0x0 6. "RX_VCO_CONTCAL_EN,Value of the continous calibration enable from the RX PWRSM" "0,1" newline bitfld.word 0x0 5. "RX_VCO_CAL_RST,Value of the calibration reset from the RX PWRSM" "0,1" newline bitfld.word 0x0 4. "RX_VCO_F_RST,Value of the RX VCO frequency reset from the RX PWRSM" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "RX_VCO_FSM_STATE,Value of the RX VCO CAL FSM" rgroup.word 0x600DC++0x1 line.word 0x0 "L0_DIG_RX__RX_VCO_STAT_2,RX VCO status register #2" bitfld.word 0x0 15. "RX_VCO_UP,Indicates that the RX VCO is ready" "0,1" newline bitfld.word 0x0 14. "RX_VCO_CORRECT,Indicates that the RX VCO clock has the correct frequency" "0,1" newline bitfld.word 0x0 13. "VCOCLK_TOO_FST,Indicates that the RX VCO clock frequency is too fast" "0,1" newline hexmask.word 0x0 0.--12. 1. "VCO_CNTR_FINAL,Value of Rx VCO counter when refclk counter expired" group.word 0x600E0++0x1 line.word 0x0 "L0_DIG_RX_RX_ALIGN_XAUI_COMM_MASK,XAUI_COMMA Mask" hexmask.word 0x0 0.--9. 1. "XAUI_COMM_MASK,XAUI_COMMA Mask." group.word 0x600E4++0x1 line.word 0x0 "L0_DIG_RX_LBERT_CTL,Pattern Matcher controls" bitfld.word 0x0 4. "SYNC,Synchronize pattern matcher LFSR with incoming data" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "MODE,Pattern to match When changing modes you must change to disabled first" group.word 0x600E8++0x1 line.word 0x0 "L0_DIG_RX_LBERT_ERR,Pattern match error counter" bitfld.word 0x0 15. "OV14,If active multiply COUNT by 128." "0,1" newline hexmask.word 0x0 0.--14. 1. "COUNT,A read of this register or a sync of the PM resets the error count." group.word 0x600EC++0x1 line.word 0x0 "L0_DIG_RX_CDR_CDR_CTL_0,Control bits for receiver in recovered domain" hexmask.word.byte 0x0 7.--10. 1. "DTB_SEL,Select to drive various signals onto the dtb" newline bitfld.word 0x0 6. "ALWAYS_REALIGN,Realign on any misaligned comma" "0,1" newline bitfld.word 0x0 5. "PHDET_EN_PR_MODE,Enable partial response phase detector mode" "0,1" newline bitfld.word 0x0 4. "PHDET_POL,Reverse polarity of phase error" "0,1" newline bitfld.word 0x0 2.--3. "PHDET_EDGE,Edges to use for phase detection." "0,1,2,3" newline bitfld.word 0x0 0.--1. "PHDET_EN,Enable phase detector." "0,1,2,3" group.word 0x600F0++0x1 line.word 0x0 "L0_DIG_RX_CDR_CDR_CTL_1,CDR Control Register #1" hexmask.word.byte 0x0 10.--15. 1. "SSC_OFF_CNT1,When SSC mode is disabled the 12-bit word count in gain stage 1 is:" newline hexmask.word 0x0 0.--9. 1. "SSC_OFF_CNT0,When SSC mode is disabled the 12-bit word count in gain stage 0 is:" group.word 0x600F4++0x1 line.word 0x0 "L0_DIG_RX_CDR_CDR_CTL_2,CDR Control Register #2" hexmask.word.byte 0x0 9.--15. 1. "SSC_ON_CNT1,When SSC mode is enabled the 12-bit word count in gain stage 1 is:" newline hexmask.word 0x0 0.--8. 1. "SSC_ON_CNT0,When SSC mode is enabled the 12-bit word count in gain stage 0 is:" group.word 0x600F8++0x1 line.word 0x0 "L0_DIG_RX_CDR_CDR_CTL_3,CDR Control Register #3" bitfld.word 0x0 13.--15. "FRUG_OVRD_VALUE,Override value for FRUG (frequency update gain)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 10.--12. "PHUG_OVRD_VALUE,Override value for PHUG (phase update gain)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 9. "OVRD_DPLL_G,Override PHUG and FRUG values" "0,1" newline bitfld.word 0x0 6.--8. "SSC_OFF_FRUG0,When SSC mode is disabled the frug value in gain stage 0 is SSC_OFF_FRUG0" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "SSC_OFF_PHUG1,When SSC mode is disabled the phug value in gain stage 1 is SSC_OFF_PHUG1" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "SSC_OFF_PHUG0,When SSC mode is disabled the phug value in gain stage 0 is SSC_OFF_PHUG0" "0,1,2,3,4,5,6,7" group.word 0x600FC++0x1 line.word 0x0 "L0_DIG_RX_CDR_CDR_CTL_4,CDR Control Register #4" bitfld.word 0x0 12.--14. "SSC_ON_PHUG1,When SSC mode is enabled the phug value in gain stage 1 is SSC_ON_PHUG1" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 9.--11. "SSC_ON_PHUG0,When SSC mode is enabled the phug value in gain stage 0 is SSC_ON_PHUG0" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 6.--8. "SSC_ON_FRUG1,When SSC mode is enabled the frug value in gain stage 1 is SSC_ON_FRUG1" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "SSC_ON_FRUG0,When SSC mode is enabled the frug value in gain stage 0 is SSC_ON_FRUG0" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "SSC_OFF_FRUG1,When SSC mode is disabled the frug value in gain stage 1 is SSC_OFF_FRUG1" "0,1,2,3,4,5,6,7" rgroup.word 0x60100++0x1 line.word 0x0 "L0_DIG_RX_CDR_STAT,Current output values to dpll (phug. frug)" bitfld.word 0x0 3.--5. "FRUG_VALUE,NOTES: Current value for dpll_frug[2:0]" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "PHUG_VALUE,NOTES: Current value for dpll_phug[2:0]" "0,1,2,3,4,5,6,7" group.word 0x60104++0x1 line.word 0x0 "L0_DIG_RX_DPLL_FREQ,Current frequency integrator value." hexmask.word 0x0 0.--13. 1. "VAL,Freq is 125*VAL ppm from the reference (volatile and 2 reads needed to read value)" group.word 0x60108++0x1 line.word 0x0 "L0_DIG_RX_DPLL_FREQ_BOUND_0,Frequency Bounds for incoming data stream #0" hexmask.word 0x0 1.--10. 1. "UPPER_F_BOUND,Upper frequency bound in terms of LSBs of the integral control code" newline bitfld.word 0x0 0. "F_BOUND_EN,Enable the frequency bounds feature" "0,1" group.word 0x6010C++0x1 line.word 0x0 "L0_DIG_RX_DPLL_FREQ_BOUND_1,Frequency Bounds for incoming data stream #1" hexmask.word 0x0 0.--9. 1. "LER_F_BOUND,Lower frequency bound in terms of LSBs of the integral control code" group.word 0x60110++0x1 line.word 0x0 "L0_ADPT_CFG_0,Adaptation Configuration Register #0" bitfld.word 0x0 15. "ADPT_CLK_DIV4_EN,Set the adaptation clock to be divided by 4 (default is div2)" "0,1" newline bitfld.word 0x0 14. "START_ASM1,Start adaptation state machine #1 (VGA CTLE DFE EYEH) This register-bit is self-clearing" "0,1" newline hexmask.word.byte 0x0 10.--13. 1. "N_TGG_ASM1,Number of toggle loop iterations for ASM1" newline hexmask.word 0x0 0.--9. 1. "N_TOP_ASM1,Number of top level loop iterations for ASM1" group.word 0x60114++0x1 line.word 0x0 "L0_ADPT_CFG_1,Adaptation Configuration Register #1" bitfld.word 0x0 11. "DFE_T1_ANA_DIS,Disable updating DFE tap1 analog values during adaptation" "0,1" newline bitfld.word 0x0 10. "CTLE_POLE_OVRD_EN,Override CTLE pole value (only valid if adaptation is run)" "0,1" newline bitfld.word 0x0 8.--9. "CTLE_POLE_OVRD_VAL,CTLE Pole override value to load at start of adaptation" "0,1,2,3" newline bitfld.word 0x0 7. "FST_AFE_DFE_STTL,Enable fast AFE and DFE settling time (simulation only)" "0,1" newline hexmask.word.byte 0x0 0.--6. 1. "N_WAIT_ASM1,Number of wait cycles for Adaptation SM #1" group.word 0x60118++0x1 line.word 0x0 "L0_ADPT_CFG_2,Adaptation Configuration Register #2" hexmask.word.byte 0x0 5.--9. 1. "TGG_PTTRN_1,Pattern for the second toggle loop Error slicer is moved upward by Data tap1 if this pattern is matched" newline hexmask.word.byte 0x0 0.--4. 1. "TGG_PTTRN_0,Pattern for the first toggle loop Error slicer is moved downward by Data tap1 if this pattern is matched" group.word 0x6011C++0x1 line.word 0x0 "L0_ADPT_CFG_3,Adaptation Configuration Register #3" bitfld.word 0x0 15. "ESL_TWICE_DSL,Assert if error slicer has twice the voltage range as the data slicer (for the same 8 bits)." "0,1" newline bitfld.word 0x0 14. "TGG_EN,Enable toggling of the error slicer" "0,1" newline bitfld.word 0x0 13. "EYEHO_EN,Enable eye height measurement using odd error slicer" "0,1" newline bitfld.word 0x0 12. "EYEHE_EN,Enable eye height measurement using even error slicer" "0,1" newline hexmask.word.byte 0x0 7.--11. 1. "DFE_EN,Enable DFE adaptation for taps 5-1" newline bitfld.word 0x0 6. "ATT_EN,Enable ATT adaptation" "0,1" newline bitfld.word 0x0 5. "VGA_EN,Enable VGA adaptation" "0,1" newline hexmask.word.byte 0x0 0.--4. 1. "CTLE_EN,Enable CTLE boost adaptation The five bits determine which correlators are used to adapt the CTLE" group.word 0x60120++0x1 line.word 0x0 "L0_ADPT_CFG_4,Adaptation Configuration Register #4" hexmask.word.byte 0x0 12.--15. 1. "DFE2_TH,DFE Tap2 correlation decision threshold (2^N-1)" newline hexmask.word.byte 0x0 8.--11. 1. "DFE1_TH,DFE Tap1 correlation decision threshold (2^N-1)" newline hexmask.word.byte 0x0 4.--7. 1. "VGA_TH,VGA correlation decision threshold (2^N-1) During eye height measurement the VGA_TH is repurporsed for error slicer updates." newline hexmask.word.byte 0x0 0.--3. 1. "CTLE_TH,CTLE correlation decision threshold (2^N-1)" group.word 0x60124++0x1 line.word 0x0 "L0_ADPT_CFG_5,Adaptation Configuration Register #5" hexmask.word.byte 0x0 12.--15. 1. "TH_OFST,Apply an offset to the decision threshold" newline hexmask.word.byte 0x0 8.--11. 1. "DFE5_TH,DFE Tap5 correlation decision threshold (2^N-1)" newline hexmask.word.byte 0x0 4.--7. 1. "DFE4_TH,DFE Tap4 correlation decision threshold (2^N-1)" newline hexmask.word.byte 0x0 0.--3. 1. "DFE3_TH,DFE Tap3 correlation decision threshold (2^N-1)" group.word 0x60128++0x1 line.word 0x0 "L0_ADPT_CFG_6,Adaptation Configuration Register #6" bitfld.word 0x0 13.--15. "ATT_L_TH,ATT low threshold" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 12. "VGA_SAT_CNT_STICKY,If deasserted then VGA saturation counts must be consecutive to change ATT" "0,1" newline bitfld.word 0x0 9.--11. "VGA_SAT_CNT,VGA saturation count" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 6.--8. "ATT_MU,ATT gain code update gain (2^N)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "VGA_MU,VGA gain code update gain (2^N) During eye height measurement the VGA_MU is repurporsed for error slicer updates." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "CTLE_MU,CTLE Boost code update gain (2^N)" "0,1,2,3,4,5,6,7" group.word 0x6012C++0x1 line.word 0x0 "L0_ADPT_CFG_7,Adaptation Configuration Register #7" hexmask.word.byte 0x0 8.--11. 1. "VGA_LEV_L,VGA level low saturation limit" newline hexmask.word.byte 0x0 4.--7. 1. "VGA_LEV_H,VGA level high saturation limit" newline hexmask.word.byte 0x0 0.--3. 1. "VGA_MIN_SAT,VGA minimum saturation limit" group.word 0x60130++0x1 line.word 0x0 "L0_ADPT_CFG_8,Adaptation Configuration Register #8" bitfld.word 0x0 12.--14. "DFE5_MU,DFE tap5 code update gain (2^N)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 9.--11. "DFE4_MU,DFE tap4 code update gain (2^N)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 6.--8. "DFE3_MU,DFE tap3 code update gain (2^N)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "DFE2_MU,DFE tap2 code update gain (2^N)" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "DFE1_MU,DFE tap1 code update gain (2^N)" "0,1,2,3,4,5,6,7" group.word 0x60134++0x1 line.word 0x0 "L0_ADPT_CFG_9,Adaptation Configuration Register #9" hexmask.word.byte 0x0 8.--15. 1. "ERR_SLO_ADPT_INIT,The error odd slicer is initialized to this value at the start of a new adaptation request." newline hexmask.word.byte 0x0 0.--7. 1. "ERR_SLE_ADPT_INIT,The error even slicer is initialized to this value at the start of a new adaptation request." group.word 0x60138++0x1 line.word 0x0 "L0_RST_ADPT_CFG,Reset Adaptation Configuration Register" bitfld.word 0x0 4. "RST_ADPT_TAP1,Reset Data Tap1 when turning off DFE adaptation (Taps 2-5 are always turned off when DFE adaptation is turned off)" "0,1" newline bitfld.word 0x0 3. "RST_ADPT_CTLE_POLE,Reset CTLE Pole when turning off AFE adaptation" "0,1" newline bitfld.word 0x0 2. "RST_ADPT_CTLE_BST,Reset CTLE Boost when turning off AFE adaptation" "0,1" newline bitfld.word 0x0 1. "RST_ADPT_VGA,Reset VGA when turning off AFE adaptation" "0,1" newline bitfld.word 0x0 0. "RST_ADPT_ATT,Reset ATT when turning off AFE adaptation" "0,1" rgroup.word 0x6013C++0x1 line.word 0x0 "L0_ATT_STATUS,Value of ATT Adaptation code" bitfld.word 0x0 8. "ASM1_DON,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "ATT_ADPT_CODE,Value of ATT adaptation code" rgroup.word 0x60140++0x1 line.word 0x0 "L0_VGA_STATUS,Value of VGA Adaptation code" bitfld.word 0x0 9. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word 0x0 0.--8. 1. "VGA_ADPT_CODE,Value of VGA adaptation code" rgroup.word 0x60144++0x1 line.word 0x0 "L0_CTLE_STATUS,Value of CTLE Adaptation code" bitfld.word 0x0 12. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline bitfld.word 0x0 10.--11. "CTLE_POLE_ADPT_CODE,Value of CTLE Pole adaptation code" "0,1,2,3" newline hexmask.word 0x0 0.--9. 1. "CTLE_BST_ADPT_CODE,Value of CTLE Boost adaptation code" rgroup.word 0x60148++0x1 line.word 0x0 "L0_DFE_TAP1_STATUS,Value of DFE Tap1 Adaptation code" bitfld.word 0x0 13. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word 0x0 0.--12. 1. "DFE_TAP1_ADPT_CODE,Value of DFE tap1 adaptation code" rgroup.word 0x6014C++0x1 line.word 0x0 "L0_DFE_TAP2_STATUS,Value of DFE Tap2 Adaptation code" bitfld.word 0x0 12. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word 0x0 0.--11. 1. "DFE_TAP2_ADPT_CODE,Value of DFE tap2 adaptation code" rgroup.word 0x60150++0x1 line.word 0x0 "L0_DFE_TAP3_STATUS,Value of DFE Tap3 Adaptation code" bitfld.word 0x0 12. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word 0x0 0.--11. 1. "DFE_TAP3_ADPT_CODE,Value of DFE tap3 adaptation code" rgroup.word 0x60154++0x1 line.word 0x0 "L0_DFE_TAP4_STATUS,Value of DFE Tap4 Adaptation code" bitfld.word 0x0 12. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word 0x0 0.--11. 1. "DFE_TAP4_ADPT_CODE,Value of DFE tap4 adaptation code" rgroup.word 0x60158++0x1 line.word 0x0 "L0_DFE_TAP5_STATUS,Value of DFE Tap5 Adaptation code" bitfld.word 0x0 12. "ASM1_DN,Asserts when Adaptation state machine #1 is done" "0,1" newline hexmask.word 0x0 0.--11. 1. "DFE_TAP5_ADPT_CODE,Value of DFE tap5 adaptation code" group.word 0x6015C++0x1 line.word 0x0 "L0_DFE_DAT_EVN_H,Offset values for RX DFE Data Even High vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_EVN_H_VDAC_OFST,Offset value for DFE Data Even High vDAC" group.word 0x60160++0x1 line.word 0x0 "L0_DFE_DAT_EVN_L,Offset values for RX DFE Data Even Low vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_EVN_L_VDAC_OFST,Offset value for DFE Data Even Low vDAC" group.word 0x60164++0x1 line.word 0x0 "L0_DFE_DAT_ODD_H,Offset values for RX DFE Data Odd High vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_ODD_H_VDAC_OFST,Offset value for DFE Data Odd High vDAC" group.word 0x60168++0x1 line.word 0x0 "L0_DFE_DAT_ODD_L,Offset values for RX DFE Data Odd Low vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_ODD_L_VDAC_OFST,Offset value for DFE Data Odd Low vDAC" group.word 0x6016C++0x1 line.word 0x0 "L0_RX_SLICER_CTRL_EVN,Sets values for RX SLICER CTRL EVEN signals going to ANA" hexmask.word.byte 0x0 0.--3. 1. "RX_ANA_SLICER_CTRL_E,Value for rx_ana_slicer_ctrl_e[3:0]" group.word 0x60170++0x1 line.word 0x0 "L0_RX_SLICER_CTRL_ODD,Sets values for RX SLICER CTRL ODD signals going to ANA" hexmask.word.byte 0x0 0.--3. 1. "RX_ANA_SLICER_CTRL_O,Value for rx_ana_slicer_ctrl_o[3:0]" group.word 0x60174++0x1 line.word 0x0 "L0_DFE_ERR_EVN_VDAC_OFST,Offset values for RX DFE Error Even vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_ERR_EVN_VDAC_OFST,Offset value for DFE Error Even vDAC" group.word 0x60178++0x1 line.word 0x0 "L0_DFE_ERR_ODD_VDAC_OFST,Offset values for RX DFE Error Odd vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_ERR_ODD_VDAC_OFST,Offset value for DFE Error Odd vDAC" rgroup.word 0x6017C++0x1 line.word 0x0 "L0_ERR_SLICER_LEVEL,Value of Error Slicer Level" hexmask.word.byte 0x0 8.--15. 1. "E_SLE_LVL,Even Error Slicer Level" newline hexmask.word.byte 0x0 0.--7. 1. "E_SLO_LVL,Odd Error Slicer Level" group.word 0x60180++0x1 line.word 0x0 "L0_DFE_BYP_EVN_VDAC_OFST,Offset values for RX DFE By-Pass Even vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_BYP_EVN_VDAC_OFST,Offset value for DFE By-Pass Even vDAC" group.word 0x60184++0x1 line.word 0x0 "L0_DFE_BYP_ODD_VDAC_OFST,Offset values for RX DFE By-Pass Odd vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_BYP_ODD_VDAC_OFST,Offset value for DFE By-Pass Odd vDAC" group.word 0x60188++0x1 line.word 0x0 "L0_ADPT_RESET,Adaptation reset register" bitfld.word 0x0 0. "RESET_ASM1,Resets adaptation state machine (ASM1) as well as the stats capture block." "0,1" group.word 0x6018C++0x1 line.word 0x0 "L0_ADPT_CFG_10,Adaptation Configuration Register #10" bitfld.word 0x0 0.--2. "CTLE_T1_WT,When calculating CTLE correlation tap1 correlation will be right shifted by CTLE_T1_WT before being used." "0,1,2,3,4,5,6,7" group.word 0x60190++0x1 line.word 0x0 "L0_DIG_RX_STAT_LD_VAL_1,Stat load value for the sample counter #1" bitfld.word 0x0 15. "SC1_START,Start sample counter #1 This is a self-clearing bit" "0,1" newline hexmask.word 0x0 0.--14. 1. "SC1_LD_VAL,Sample counter #1 load value" group.word 0x60194++0x1 line.word 0x0 "L0_DIG_RX_STAT_DAT_MSK,Stat data mask bits [15:0]" hexmask.word 0x0 0.--15. 1. "DAT_MSK_15_0,Value of data_msk_r[15:0]" group.word 0x60198++0x1 line.word 0x0 "L0_DIG_RX_STAT_MATCH_CTL0,Stat match controls register #0" bitfld.word 0x0 14.--15. "SCOPE_DLY,# of clock cycle delays on scope_data_rx_clk An additional MSB is added in SCOPE_DLY_2" "0,1,2,3" newline hexmask.word.byte 0x0 10.--13. 1. "DAT_MSK_19_16,Value of data_msk_r[19:16]" newline hexmask.word.byte 0x0 5.--9. 1. "PTTRN_CR1A_4_0,Value of pattern A for 1st correlator (bits 4:0)" newline hexmask.word.byte 0x0 0.--4. 1. "PTTRN_MSK_CR1A_4_0,Value of pattern A mask for 1st correlator (bits 4:0)" group.word 0x6019C++0x1 line.word 0x0 "L0_DIG_RX_STAT_MATCH_CTL1,Stat match controls register #1" bitfld.word 0x0 11. "PTTRN_CR1A_ADPT_EN,Enable ORing of adapation pattern with pattern CR1A" "0,1" newline hexmask.word.byte 0x0 6.--10. 1. "PTTRN_CR1B_4_0,Value of pattern B for 1st correlator (bits 4:0)" newline hexmask.word.byte 0x0 1.--5. 1. "PTTRN_MSK_CR1B_4_0,Value of pattern B mask for 1st correlator (bits 4:0)" newline bitfld.word 0x0 0. "PTTRN_CR1B_EN,Enable pattern B matching for 1st correlator" "0,1" group.word 0x601A0++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CTL0,Stat controls register #0" bitfld.word 0x0 15. "SKIP_EN,Value of skip_en_r" "0,1" newline bitfld.word 0x0 14. "SC_TR_MODE,Sample counter operation mode" "0,1" newline bitfld.word 0x0 13. "STAT_RXCLK_SEL,Select stat clock" "0,1" newline bitfld.word 0x0 10.--12. "STAT_SRC_SEL,Select stat source input" "0,1,2,3,4,5,6,7" newline hexmask.word.byte 0x0 6.--9. 1. "STAT_SHFT_SEL,Select stat source shift value" newline bitfld.word 0x0 5. "CORR_MODE_EN,Enable correlation mode" "0,1" newline bitfld.word 0x0 3.--4. "CORR_SRC_SEL,Select correlation input source" "0,1,2,3" newline bitfld.word 0x0 2. "CORR_SHFT_SEL,Select shift for phase." "0,1" newline bitfld.word 0x0 1. "CORR_SHFT_SEL_VGA,Select shift for error going to VGA." "0,1" group.word 0x601A4++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CTL1,Stat controls register #1" bitfld.word 0x0 14.--15. "VLD_CTL,Gating configuration of stats collection" "0,1,2,3" newline bitfld.word 0x0 13. "VLD_LOSS_CLR,Clearing of stats collection upon loss of valid 0x0 - hold sample and stat counters 0x1 - clear sample and stat counters" "0: hold sample and stat counters 0x1,?" newline bitfld.word 0x0 11.--12. "DAT_DLY_SEL,# of clock cycle delays on rx_data[19:0] An additional MSB is added in DATA_DLY_SEL_2" "0,1,2,3" newline bitfld.word 0x0 10. "STAT_CLK_EN,Clock gate enable for stat clock" "0,1" newline bitfld.word 0x0 9. "SC_PAUSE,Pause the sample counter and stat counters" "0,1" newline bitfld.word 0x0 6. "STAT_CNT_6_EN,Enable for stat counter 6" "0,1" newline bitfld.word 0x0 5. "STAT_CNT_5_EN,Enable for stat counter 5" "0,1" newline bitfld.word 0x0 4. "STAT_CNT_4_EN,Enable for stat counter 4" "0,1" newline bitfld.word 0x0 3. "STAT_CNT_3_EN,Enable for stat counter 3 Only counter to be enabled by default since used for offset calibration" "0,1" newline bitfld.word 0x0 2. "STAT_CNT_2_EN,Enable for stat counter 2" "0,1" newline bitfld.word 0x0 1. "STAT_CNT_1_EN,Enable for stat counter 1" "0,1" newline bitfld.word 0x0 0. "STAT_CNT_0_EN,Enable for stat counter 0" "0,1" rgroup.word 0x601A8++0x1 line.word 0x0 "L0_DIG_RX_STAT_SMPL_CNT1,Sample Counter #1 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "SMPL_CNT1,Current value of sample counter #1" rgroup.word 0x601AC++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_0,Stat Counter 0 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_0,Current value of stat counter #0" rgroup.word 0x601B0++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_1,Stat Counter 1 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_1,Current value of stat counter #1" rgroup.word 0x601B4++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_2,Stat Counter 2 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_2,Current value of stat counter #2" rgroup.word 0x601B8++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_3,Stat Counter 3 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_3,Current value of stat counter #3" rgroup.word 0x601BC++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_4,Stat Counter 4 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_4,Current value of stat counter #4" rgroup.word 0x601C0++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_5,Stat Counter 5 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_5,Current value of stat counter #5" rgroup.word 0x601C4++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CNT_6,Stat Counter 6 Status" bitfld.word 0x0 15. "SMPL_CNT1_DN,Status of sample counter #1" "0,1" newline hexmask.word 0x0 0.--14. 1. "STAT_CNT_6,Current value of stat counter #6" group.word 0x601C8++0x1 line.word 0x0 "L0_DIG_RX_STAT_CAL_COMP_CLK_CTL,Calibration Comparator Control" bitfld.word 0x0 3.--5. "REF_DIV_CNT,Ref range clock count (e." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "PRECHRGE_CNT,Precharge Count (e." "0,1,2,3,4,5,6,7" group.word 0x601CC++0x1 line.word 0x0 "L0_DIG_RX_STAT_MATCH_CTL2,Stat match controls register #2" hexmask.word 0x0 0.--14. 1. "PTTRN_CR1A_19_5,Value of pattern A for 1st correlator (bits 19:5)" group.word 0x601D0++0x1 line.word 0x0 "L0_DIG_RX_STAT_MATCH_CTL3,Stat match controls register #3" hexmask.word 0x0 0.--14. 1. "PTTRN_MSK_CR1A_19_5,Value of pattern A mask for 1st correlator (bits 19:5)" group.word 0x601D4++0x1 line.word 0x0 "L0_DIG_RX_STAT_MATCH_CTL4,Stat match controls register #4" hexmask.word 0x0 0.--14. 1. "PTTRN_CR1B_19_5,Value of pattern B for 1st correlator (bits 19:5)" group.word 0x601D8++0x1 line.word 0x0 "L0_DIG_RX_STAT_MATCH_CTL5,Stat match controls register #5" hexmask.word 0x0 0.--14. 1. "PTTRN_MSK_CR1B_19_5,Value of pattern B mask for 1st correlator (bits 19:5)" group.word 0x601DC++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_CTL2,Stat controls register #2" bitfld.word 0x0 1. "SCOPE_DLY_2,Additional MSB bit for SCOPE_DLY to extend the delay range to 0->7" "0,1" newline bitfld.word 0x0 0. "DAT_DLY_SEL_2,Additional MSB bit for DATA_DLY_SEL to extend the delay range to 0->7" "0,1" group.word 0x601E0++0x1 line.word 0x0 "L0_DIG_RX_STAT_STAT_STOP,Stat stop register" bitfld.word 0x0 0. "SC1_STOP,Stop sample counters #1 and associated stat counters." "0,1" group.word 0x601E4++0x1 line.word 0x0 "L0_TX_OVRD_OUT,Override values for TX signals going to ANA" bitfld.word 0x0 15. "TX_OVRD_EN,Enable override values for all outputs controlled by this register" "0,1" newline bitfld.word 0x0 14. "TX_RXDET_EN,Override value for tx_ana_rxdet_en" "0,1" newline bitfld.word 0x0 13. "TX_DIV4_EN,Override value for tx_ana_div4_en" "0,1" newline bitfld.word 0x0 10.--12. "TX_ANA_DAT_RATE,Override value for tx_ana_data_rate" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 9. "TX_ANA_SERIAL_EN,Override value for tx_ana_serial_en" "0,1" newline bitfld.word 0x0 8. "TX_ANA_RESET,Override value for tx_ana_reset" "0,1" newline bitfld.word 0x0 7. "TX_ANA_MPLLB_CLK_EN,Override value for tx_ana_mpllb_clk_en" "0,1" newline bitfld.word 0x0 6. "TX_ANA_MPLLA_CLK_EN,Override value for tx_ana_mplla_clk_en" "0,1" newline bitfld.word 0x0 5. "TX_ANA_WORD_CLK_EN,Override value for tx_ana_word_clk_en" "0,1" newline bitfld.word 0x0 4. "TX_ANA_CLK_EN,Override value for tx_ana_clk_en" "0,1" newline bitfld.word 0x0 3. "TX_ANA_VCM_HOLD,Override value for tx_ana_vcm_hold" "0,1" newline bitfld.word 0x0 2. "TX_ANA_REFGEN_EN,Override value for tx_ana_refgen_en" "0,1" newline bitfld.word 0x0 1. "TX_ANA_DAT_EN,Override value for tx_ana_data_en" "0,1" newline bitfld.word 0x0 0. "TX_ANA_CLK_SHIFT,Override value for tx_ana_clk_shift" "0,1" group.word 0x601E8++0x1 line.word 0x0 "L0_TX_TERM_UP_CODE_OVRD_OUT,Override value for TX termination code up going to ANA" bitfld.word 0x0 12. "TX_ANA_VCM_HOLD_GS,Override value for tx_ana_vcm_hold_gs" "0,1" newline bitfld.word 0x0 11. "TX_CLK_LB_EN,Override value for tx_ana_clk_lb_en (override enabled by TX_OVRD_EN)." "0,1" newline bitfld.word 0x0 10. "TX_TERM_UP_OVRD_EN,Overrides enable for the tx_ana_term_code_up[9:0] signal" "0,1" newline hexmask.word 0x0 0.--9. 1. "TX_TERM_UP_CODEP,Overrides the tx_ana_term_code_up[9:0] signal" group.word 0x601EC++0x1 line.word 0x0 "L0_TX_TERM_DN_CODE_OVRD_OUT,Override value for TX termination down code going to ANA" bitfld.word 0x0 10. "TX_TERM_DN_OVRD_EN,Overrides enable for the tx_ana_term_code_dn[9:0] signal" "0,1" newline hexmask.word 0x0 0.--9. 1. "TX_TERM_DN_CODE,Overrides the tx_ana_term_code_dn[9:0] signal" group.word 0x601F0++0x1 line.word 0x0 "L0_TX_EQ_OVRD_OUT_0,Override values for TX EQ signals going to ANA register #0" bitfld.word 0x0 15. "TX_EQ_OVRD_EN,Override enable for tx eq signals" "0,1" newline hexmask.word 0x0 1.--14. 1. "TX_ANA_CTRL_ATTEN_13_0,Override value for tx_ana_ctrl_atten[13:0]" newline bitfld.word 0x0 0. "TX_ANA_LOAD_CLK,Override value for tx_ana_load_clk" "0,1" group.word 0x601F4++0x1 line.word 0x0 "L0_TX_EQ_OVRD_OUT_1,Override values for TX EQ signals going to ANA register #1" hexmask.word 0x0 0.--15. 1. "TX_ANA_CTRL_ATTEN_29_14,Override value for tx_ana_ctrl_atten[29:14]" group.word 0x601F8++0x1 line.word 0x0 "L0_TX_EQ_OVRD_OUT_2,Override values for TX EQ signals going to ANA register #2" hexmask.word 0x0 7.--15. 1. "TX_ANA_CTRL_PRE,Override value for tx_ana_ctrl_pre[8:0]" newline bitfld.word 0x0 6. "TX_ANA_CTRL_HALF_DN,Override value for tx_ana_ctrl_half_dn" "0,1" newline bitfld.word 0x0 5. "TX_ANA_CTRL_HALF_UP,Override value for tx_ana_ctrl_half_up" "0,1" newline hexmask.word.byte 0x0 0.--4. 1. "TX_ANA_CTRL_ATTEN_34_30,Override value for tx_ana_ctrl_atten[34:30]" group.word 0x601FC++0x1 line.word 0x0 "L0_TX_EQ_OVRD_OUT_3,Override values for TX EQ signals going to ANA register #3" bitfld.word 0x0 4.--5. "TX_ANA_CTRL_POST_QTR,Override value for tx_ana_ctrl_post_qtr[1:0]" "0,1,2,3" newline bitfld.word 0x0 3. "TX_ANA_CTRL_POST_HALF,Override value for tx_ana_ctrl_post_half" "0,1" newline bitfld.word 0x0 1.--2. "TX_ANA_CTRL_PRE_QTR,Override value for tx_ana_ctrl_pre_qtr[1:0]" "0,1,2,3" newline bitfld.word 0x0 0. "TX_ANA_CTRL_PRE_HALF,Override value for tx_ana_ctrl_pre_half" "0,1" group.word 0x60200++0x1 line.word 0x0 "L0_TX_EQ_OVRD_OUT_4,Override values for TX EQ signals going to ANA register #4" hexmask.word 0x0 0.--13. 1. "TX_ANA_CTRL_POST,Override value for tx_ana_ctrl_post[13:0]" group.word 0x60204++0x1 line.word 0x0 "L0_RX_CTL_OVRD_OUT,Override values for RX control signals going to ANA" bitfld.word 0x0 8. "RX_CTL_OVRD_EN,Enable override values for outputs [8-0] below" "0,1" newline bitfld.word 0x0 7. "RX_LBK_CLK_EN,Override value for rx_ana_loopback_clk_en" "0,1" newline bitfld.word 0x0 6. "RX_ANA_DFE_BYP_N,Override value for rx_ana_dfe_bypass_n" "0,1" newline bitfld.word 0x0 5. "RX_ANA_DFE_TAPS_EN,Override value for rx_ana_dfe_taps_en" "0,1" newline bitfld.word 0x0 4. "RX_ANA_DIV4_EN,Override value for rx_ana_div4_en" "0,1" newline bitfld.word 0x0 3. "RX_ANA_WORD_CLK_EN,Override value for rx_ana_word_clk_en" "0,1" newline bitfld.word 0x0 1.--2. "RX_ANA_DAT_RATE,Override value for rx_ana_data_rate" "0,1,2,3" newline bitfld.word 0x0 0. "RX_ANA_DIV16P5_CLK_EN,Override value for rx_ana_div16p5_clk_en" "0,1" group.word 0x60208++0x1 line.word 0x0 "L0_RX_PWR_OVRD_OUT,Override values for RX PWR UP/DN signals going to ANA" bitfld.word 0x0 7. "RX_PWR_OVRD_EN,Enable override values for all outputs controlled by this register" "0,1" newline bitfld.word 0x0 6. "RX_ANA_DESERIAL_EN,Override value for rx_ana_deserial_en" "0,1" newline bitfld.word 0x0 5. "RX_ANA_CDR_EN,Override value for rx_ana_cdr_en" "0,1" newline bitfld.word 0x0 4. "RX_ANA_CLK_EN,Override value for rx_ana_clk_en" "0,1" newline bitfld.word 0x0 3. "RX_ANA_CLK_DCC_EN,Override value for rx_ana_clk_dcc_en" "0,1" newline bitfld.word 0x0 2. "RX_ANA_CLK_VREG_EN,Override value for rx_ana_clk_vreg_en" "0,1" newline bitfld.word 0x0 1. "RX_ANA_AFE_EN,Override value for rx_ana_afe_en" "0,1" newline bitfld.word 0x0 0. "RX_ANA_LOS_EN,Override value for rx_ana_los_en" "0,1" group.word 0x6020C++0x1 line.word 0x0 "L0_RX_VCO_OVRD_OUT_0,Override values for RX VCO signals going to ANA #0" bitfld.word 0x0 15. "RX_CDR_F_TN_OVRD_EN,Enable override value for rx_ana_cdr_freq_tune" "0,1" newline bitfld.word 0x0 14. "RX_ANA_VCO_CNTR_CLK,Override value for rx_ana_vco_cntr_clk" "0,1" newline bitfld.word 0x0 13. "RX_ANA_VCO_CNTR_EN,Override value for rx_ana_vco_cntr_en" "0,1" newline hexmask.word 0x0 3.--12. 1. "RX_ANA_CDR_F_TN,Override value for rx_ana_cdr_freq_tune" newline bitfld.word 0x0 2. "RX_VCO_CDR_OVRD_EN,Enable override values for cdr_vco_en and cdr_startup" "0,1" newline bitfld.word 0x0 1. "RX_ANA_CDR_SU,Override value for rx_ana_cdr_startup" "0,1" newline bitfld.word 0x0 0. "RX_ANA_CDR_VCO_EN,Override value for rx_ana_cdr_vco_en" "0,1" group.word 0x60210++0x1 line.word 0x0 "L0_RX_VCO_OVRD_OUT_1,Override values for RX VCO signals going to ANA #1" bitfld.word 0x0 8. "RX_ANA_CDR_VCO_STP_CTRL_OVRD_EN,Override enable for rx_ana_cdr_vco_step_ctrl" "0,1" newline bitfld.word 0x0 7. "RX_ANA_CDR_VCO_STP_CTRL,Override value for rx_ana_cdr_vco_step_ctrl" "0,1" newline bitfld.word 0x0 6. "RX_ANA_CDR_VCO_TMP_CMP_OVRD_EN,Override enable for rx_ana_cdr_vco_temp_comp_en" "0,1" newline bitfld.word 0x0 5. "RX_ANA_CDR_VCO_TMP_CMP_EN,Override value for rx_ana_cdr_vco_temp_comp" "0,1" newline bitfld.word 0x0 4. "RX_ANA_VCO_CNTR_OVER_EN,Override enable for rx_ana_vco_cntr_pd" "0,1" newline bitfld.word 0x0 3. "RX_ANA_VCO_CNTR_PD,Override value for rx_ana_vco_cntr_pd" "0,1" newline bitfld.word 0x0 2. "RX_ANA_CDR_VCO_FBAND_OVRD_EN,Override enable for rx_ana_cdr_vco_freqband" "0,1" newline bitfld.word 0x0 0.--1. "RX_ANA_CDR_VCO_FBAND,Override value for rx_ana_cdr_vco_freqband" "0,1,2,3" group.word 0x60214++0x1 line.word 0x0 "L0_RX_VCO_OVRD_OUT_2,Override values for RX VCO signals going to ANA #2" bitfld.word 0x0 0. "RX_ANA_CDR_F_TN_CLK,Override value for rx_ana_cdr_freq_tune_clk - Self-clearing to generate a pulse 1 cr_clk wide" "0,1" group.word 0x60218++0x1 line.word 0x0 "L0_RX_CAL,Sets values for RX CAL signals going to ANA register" bitfld.word 0x0 15. "RX_ANA_CAL_CMP_EN,Value for rx_ana_cal_comp_en" "0,1" newline bitfld.word 0x0 13.--14. "RX_ANA_CAL_MODE,Value for rx_ana_cal_mode[1:0] 00 - Differential comparison" "0: Differential comparison,?,?,?" newline bitfld.word 0x0 12. "RX_ANA_SLICER_CAL_EN,Value for rx_ana_slicer_cal_en" "0,1" newline bitfld.word 0x0 11. "RX_ANA_CAL_SHORT_EN,Value for rx_ana_cal_short_en" "0,1" newline bitfld.word 0x0 10. "RX_ANA_CAL_LPFBYP_EN,Value for rx_ana_cal_lpfbyp_en" "0,1" newline hexmask.word.byte 0x0 5.--9. 1. "RX_ANA_CAL_MUXB_SEL,Value for rx_ana_cal_muxb_sel[4:0]" newline hexmask.word.byte 0x0 0.--4. 1. "RX_ANA_CAL_MUXA_SEL,Value for rx_ana_cal_muxa_sel[4:0]" group.word 0x6021C++0x1 line.word 0x0 "L0_RX_VDAC_RANGE_SEL,Sets values for RX DAC CTRL value going to ANA" bitfld.word 0x0 1. "RX_ANA_CAL_VDAC_DERANGE_SEL,Value for rx_ana_cal_vdac_derange" "0,1" newline bitfld.word 0x0 0. "RX_ANA_CAL_VDAC_PRANGE_SEL,Value for rx_ana_cal_vdac_prange" "0,1" group.word 0x60220++0x1 line.word 0x0 "L0_RX_DAC_CTRL,Sets values for RX DAC CTRL value going to ANA" hexmask.word.byte 0x0 0.--7. 1. "RX_ANA_CAL_DAC_CTRL,Value for rx_ana_cal_dac_ctrl[7:0]" group.word 0x60224++0x1 line.word 0x0 "L0_RX_ANA_RTRIM,Set value for RX RTRIM going to ANA" bitfld.word 0x0 8. "RX_AFE_TRIM_EN_R,enable for signal rx_afe_trim_en" "0,1" newline hexmask.word.byte 0x0 2.--7. 1. "RX_ANA_AFE_TRIM_THR_R,Threshold Value for rx_ana_afe_trim" newline bitfld.word 0x0 1. "RX_ANA_AFE_TRIM_OVRD_EN,Override enable rx_ana_afe_trim_ovrd_en" "0,1" newline bitfld.word 0x0 0. "RX_ANA_AFE_TRIM_OVRD_VAL,Override Value for rx_ana_afe_trim_ovrd_val" "0,1" group.word 0x60228++0x1 line.word 0x0 "L0_RX_DAC_CTRL_OVRD,Overrides RX DAC CTRL bus (en/val/sel) going to ANA" bitfld.word 0x0 0. "RX_CAL_DAC_CTRL_OVRD,Override enable for Cal DAC control" "0,1" group.word 0x6022C++0x1 line.word 0x0 "L0_RX_DAC_CTRL_SEL,Sets values for RX DAC CTRL Select signal going to ANA" hexmask.word.byte 0x0 0.--4. 1. "RX_ANA_CAL_DAC_CTRL_SEL,Value for rx_ana_cal_dac_ctrl_sel[4:0]" group.word 0x60230++0x1 line.word 0x0 "L0_RX_AFE_ATT_VGA,Value for RX AFE ATT & VGA signals going to ANA" bitfld.word 0x0 9. "RX_AFE_OVRD_EN,Override enable for AFE control" "0,1" newline bitfld.word 0x0 6.--8. "RX_ANA_AFE_VGA2_G,Value for rx_ana_afe_vga2_gain[2:0]" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "RX_ANA_AFE_VGA1_G,Value for rx_ana_afe_vga1_gain[2:0]" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "RX_ANA_AFE_ATT_LVL,Value for rx_ana_afe_att_lvl[2:0]" "0,1,2,3,4,5,6,7" group.word 0x60234++0x1 line.word 0x0 "L0_RX_AFE_CTLE,Values for RX AFE CTLE signals going to ANA" bitfld.word 0x0 7.--8. "RX_ANA_AFE_BIAS_MT,Value for rx_ana_afe_bias_mt[1:0]" "0,1,2,3" newline hexmask.word.byte 0x0 2.--6. 1. "RX_ANA_AFE_CTLE_BST,Value for rx_ana_afe_ctle_boost[30:0]" newline bitfld.word 0x0 0.--1. "RX_ANA_AFE_CTLE_POLE,Value for rx_ana_afe_ctle_pole[14:0]" "0,1,2,3" group.word 0x60238++0x1 line.word 0x0 "L0_RX_SCOPE,Values for RX SCOPE signals going to ANA" bitfld.word 0x0 11. "RX_ANA_SCOPE_CLK_EN,Enable the scope clocks going to the scope slicer and the lane digital part" "0,1" newline hexmask.word.byte 0x0 3.--10. 1. "RX_ANA_SCOPE_PH,Sets value for rx_ana_scope_phase[7:0]" newline bitfld.word 0x0 2. "RX_ANA_SCOPE_PH_CLK,Sets value for rx_ana_scope_ph_clk - This bit is self-clearing (i." "0,1" newline bitfld.word 0x0 1. "RX_ANA_SCOPE_SEL,Sets value for rx_ana_scope_sel" "0,1" newline bitfld.word 0x0 0. "RX_ANA_SCOPE_EN,Sets value for rx_ana_scope_en" "0,1" group.word 0x6023C++0x1 line.word 0x0 "L0_RX_SLICER_CTRL,Sets values for RX Slicer Ctrl signals going to ANA register" bitfld.word 0x0 8. "RX_ANA_SLICER_CTRL_OVRD_EN,Override enable for Rx ANA Slicer Ctrl" "0,1" newline hexmask.word.byte 0x0 4.--7. 1. "RX_ANA_SLICER_CTRL_O,Value for rx_ana_slicer_ctrl_o[3:0]" newline hexmask.word.byte 0x0 0.--3. 1. "RX_ANA_SLICER_CTRL_E,Value for rx_ana_slicer_ctrl_e[3:0]" group.word 0x60240++0x1 line.word 0x0 "L0_RX_ANA_IQ_PH_ADJ,Sets values for RX ANA IQ PHASE Adjust signal going to ANA register" hexmask.word.byte 0x0 0.--6. 1. "RX_ANA_IQ_PH_ADJ,Value for rx_ana_iq_phase_adjust[6:0]" group.word 0x60244++0x1 line.word 0x0 "L0_RX_ANA_IQ_SENSE_EN,Sets values for RX ANA IQ SENSE signal" bitfld.word 0x0 0. "RX_ANA_IQ_SENSE_EN,Value for rx_ana_iq_sense_en" "0,1" group.word 0x60248++0x1 line.word 0x0 "L0_RX_ANA_CAL_DAC_CTRL_EN,DAC CTRL enable signal" bitfld.word 0x0 1. "DAC_CTRL_SC_DIS,Disable self-clearing for the rx_ana_cal_dac_ctrl_en register" "0,1" newline bitfld.word 0x0 0. "RX_ANA_CAL_DAC_CTRL_EN,Value for rx_ana_cal_dac_ctrl_en" "0,1" group.word 0x6024C++0x1 line.word 0x0 "L0_RX_ANA_SIGS_CHGS_EN,Afe update enable signal" bitfld.word 0x0 1. "AFE_UPD_SC_DIS,Disable self-clearing for the rx_ana_afe_update_en register" "0,1" newline bitfld.word 0x0 0. "RX_ANA_AFE_UPD_EN,Value for rx_ana_afe_update_en" "0,1" group.word 0x60250++0x1 line.word 0x0 "L0_RX_ANA_PH_ADJ_CLK,Phase adjust clock signal" bitfld.word 0x0 1. "PH_ADJ_SC_DIS,Disable self-clearing for the rx_ana_iq_phase_adjust_clk register" "0,1" newline bitfld.word 0x0 0. "RX_ANA_IQ_PH_ADJ_CLK,Value for rx_ana_iq_phase_adjust_clk - If PHASE_ADJUST_SELF_CLEAR_DISABLE=0 then this bit is self-clearing (i." "0,1" rgroup.word 0x60254++0x1 line.word 0x0 "L0_STATUS_0,Lane input status register #0" bitfld.word 0x0 7. "RX_ANA_SCOPE_DAT,Value from ANA for rx_ana_scope_data" "0,1" newline bitfld.word 0x0 6. "RX_ANA_CAL_RESULT,Value from ANA for rx_ana_cal_result" "0,1" newline bitfld.word 0x0 5. "RX_ANA_LOS,Value from ANA for rx_ana_los" "0,1" newline bitfld.word 0x0 4. "TX_ANA_CLK_LB_EN,Value of tx_ana_clk_lb_en" "0,1" newline bitfld.word 0x0 3. "TX_ANA_LOOPBACK_EN,Value of tx_ana_loopback_en" "0,1" newline bitfld.word 0x0 2. "TX_ANA_RXDETM_RESULT,Value from ANA for tx_ana_rxdetm_result" "0,1" newline bitfld.word 0x0 1. "TX_ANA_RXDETP_RESULT,Value from ANA for tx_ana_rxdetp_result" "0,1" newline bitfld.word 0x0 0. "TX_ANA_CLK_SHIFT_ACK,Value from ANA for tx_ana_clk_shift_ack" "0,1" rgroup.word 0x60258++0x1 line.word 0x0 "L0_STATUS_1,Lane input status register #1" hexmask.word 0x0 0.--12. 1. "RX_ANA_VCO_CNTR,Value from ANA for rx_ana_vco_cntr" group.word 0x6025C++0x1 line.word 0x0 "L0_ANA_TX_OVRD_MEAS,TX_OVRD_MEAS" bitfld.word 0x0 7. "pull_dn_reg,pull down TX output if asserted" "0,1" newline bitfld.word 0x0 6. "pull_up_reg,pull up TX output if asserted" "0,1" newline bitfld.word 0x0 5. "vcm_hold_reg,set tx in common mode if asserted together with bit4" "0,1" newline bitfld.word 0x0 4. "ovrd_vcm_hold,If asserted bit 5 takes effect on control Tx common mode" "0,1" newline bitfld.word 0x0 3. "meas_samp_p,Measure clock p DCD through atb_s_p on clock psample" "0,1" newline bitfld.word 0x0 2. "meas_samp_m,Measure clock m DCD through atb_s_p on clock m sample" "0,1" newline bitfld.word 0x0 1. "clk_shift_reg,Controls clock shift if asserted with bit 0" "0,1" newline bitfld.word 0x0 0. "ovrd_clk_shift,If asserted allow analog register to control clock shift function" "0,1" group.word 0x60260++0x1 line.word 0x0 "L0_ANA_TX_PWR_OVRD,TX_PWR_OVRD" bitfld.word 0x0 7. "ovrd_en,Enable analog register to take control TX power state if asserted" "0,1" newline bitfld.word 0x0 6. "serial_en_reg,Enable TX serializer if asserted with bit 7" "0,1" newline bitfld.word 0x0 5. "clk_en_reg,Enable TX clock if asserted with bit 7" "0,1" newline bitfld.word 0x0 4. "data_en_reg_int,Enable TX driver data path if asserted with bit 7" "0,1" newline bitfld.word 0x0 3. "clk_div_en_reg,Enable TX divider if asserted with bit 7 overrides !tx_reset" "0,1" newline bitfld.word 0x0 2. "refgen_en_reg,Enable TX biasing if asserted with bit 7" "0,1" newline bitfld.word 0x0 1. "loopback_en_reg,Enables TX loopback path to RX if asserted along with bit 0" "0,1" newline bitfld.word 0x0 0. "ovrd_tx_loopback,Enables TX loopback mode over ridden by analog register if asserted" "0,1" group.word 0x60264++0x1 line.word 0x0 "L0_ANA_TX_ALT_BUS,TX_ALT_BUS" bitfld.word 0x0 7. "jtag_data_reg,when bit 2 is asserted it replace jtag data" "0,1" newline bitfld.word 0x0 6. "osc_vp,VP powered high threshold core device ring oscillator outputs from TX when asserted" "0,1" newline bitfld.word 0x0 5. "osc_vp_lvt,VP powered low threshold core device ring oscillator outputs from tx when asserted" "0,1" newline bitfld.word 0x0 4. "osc_vptx,vptx powered core device ring oscillator outputs from TX when asserted" "0,1" newline bitfld.word 0x0 3. "osc_vph,vph powered I/O device ring oscillator outputs from TX when asserted" "0,1" newline bitfld.word 0x0 2. "ovrd_alt_bus,Jtag data and tx data source selection function is controlled by bit<1:0> and 7 when asserted" "0: and 7 when asserted,?" newline bitfld.word 0x0 0.--1. "drv_source_reg,When bit 2 is asserted drv_source_reg<1:0> takes control of TX function overrides tx_data_source<1:0>" "0: takes control of TX function,?,?,?" group.word 0x60268++0x1 line.word 0x0 "L0_ANA_TX_ATB1,TX_ATB1" bitfld.word 0x0 7. "atb_vreg_s,put TX slow regulator output on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 6. "atb_iboost,put iboost output on atb_f_p when asserted" "0,1" newline bitfld.word 0x0 5. "atb_vreg0,Put TX fast regulator output on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 4. "override_regref_0,use atb_s_m as TX fast regulator reference voltage when asserted" "0,1" newline bitfld.word 0x0 3. "atb_vptx,Put TX driver local vptx on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 2. "atb_vdccp,Put DCC control voltage p on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 1. "atb_vdccm,Put DCC control voltage m on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 0. "atb_gd,Put tx local gd on atb_s_p when asserted" "0,1" group.word 0x6026C++0x1 line.word 0x0 "L0_ANA_TX_ATB2,TX_ATB2" bitfld.word 0x0 7. "atb_pbias,Put TX pbias on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 6. "atb_nbias,Put TX nbias on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 5. "atb_rxdetref,Put TX RX detection reference voltage on atb_s_p when asserted" "0,1" newline bitfld.word 0x0 4. "atb_txfp,Overdrive tx_p through atb_f_p when asserted" "0,1" newline bitfld.word 0x0 3. "atb_txfm,Overdrive tx_m through atb_f_p when asserted" "0,1" newline bitfld.word 0x0 2. "atb_txsp,Measure tx_p through atb_s_p when asserted" "0,1" newline bitfld.word 0x0 1. "atb_txsm,Measure tx_m through atb_s_m when asserted" "0,1" newline bitfld.word 0x0 0. "atb_vcm,Measure Tx vcm through atb_s_p when asserted" "0,1" group.word 0x60270++0x1 line.word 0x0 "L0_ANA_TX_VBST,TX_VBOOST" bitfld.word 0x0 7. "ovrd_vboost_en,Enable TX boost mode to be override by bit 6" "0,1" newline bitfld.word 0x0 6. "vboost_en_reg,If bit 7 is set to 1 analog register takes control of Tx vboost enable/disable" "0,1" newline bitfld.word 0x0 5. "boost_vptx_mode_n,If asserted TX boost mode becomes a direct boost mode." "0,1" newline bitfld.word 0x0 4. "atb_vboost,Measure vptx/2 through atb_s_p when TX boost is enabled" "0,1" newline bitfld.word 0x0 3. "atb_vboost_vref,Measure tx boost reference voltage through atb_s_p" "0,1" newline bitfld.word 0x0 2. "override_vref_boost_ref,If enabled atb_s_m is used to provide Tx boost reference voltage instead of bandgap voltage tx_vboost_vref" "0,1" newline bitfld.word 0x0 1. "atb_s_enable,Enables TX atb function if asserted." "0,1" newline bitfld.word 0x0 0. "meas_atb_vph_half,Measure vph/2 on atb_s_p" "0,1" group.word 0x60274++0x1 line.word 0x0 "L0_ANA_TX_TERM_CODE_DN,TX_TERM_CODE_DN" hexmask.word.byte 0x0 1.--7. 1. "term_code_dn_reg,TX nmos leg biasing register (7 MSBs) this is Term_code_dn_reg<9:3>" newline bitfld.word 0x0 0. "term_code_dn_ovrd,Enable analog register to overdrive TX nmos leg biasing" "0,1" group.word 0x60278++0x1 line.word 0x0 "L0_ANA_TX_TERM_CODE_UP,TX_TERM_CODE_UP" hexmask.word.byte 0x0 1.--7. 1. "term_code_up_reg,TX pmos leg biasing register (7 MSBs) this is Term_code_up_reg<9:3>" newline bitfld.word 0x0 0. "term_code_up_ovrd,Enable analog register to overdrive TX pmos leg biasing" "0,1" group.word 0x6027C++0x1 line.word 0x0 "L0_ANA_TX_IBST_CODE,TX_IBOOST_CODE" hexmask.word.byte 0x0 4.--7. 1. "iboost_code_reg,When TX boost is enabled and bit 3 is asserted these 4 bits (Iboost_code<3:0>) take control of TX boost." newline bitfld.word 0x0 3. "iboost_code_ovrd,Enable analog register overdrive for TX boost" "0,1" newline bitfld.word 0x0 2. "term_code_dn_reg_2,TX nmos leg biasing register bit 2 this is Term_code_dn_reg<2>" "0,1" newline bitfld.word 0x0 1. "term_code_up_reg_2,TX pmos leg biasing register bit 2 this is Term_code_up_reg<2>" "0,1" newline bitfld.word 0x0 0. "lfps_high_priority,If asserted lfps/beacon enable has higher priority than data enable" "0,1" group.word 0x60280++0x1 line.word 0x0 "L0_ANA_TX_OVRD_CLK,TX_OVRD_CLK" bitfld.word 0x0 7. "ovrd_word_clk_en,If asserted it allows bit 6 to override tx word clock enable" "0,1" newline bitfld.word 0x0 6. "word_clk_en_reg,Tx word clock enable/disable when bit 7 is asserted" "0,1" newline bitfld.word 0x0 5. "ovrd_mpllab_en,If asserted it allows bit 3 or 4 to take control of selecting MPLL clocks" "0,1" newline bitfld.word 0x0 4. "mplla_clk_en_reg,When asserted with bit 5 selects MPLLA clock as TX data output clock Only bit 3 or bit 4 or bit 1 can be asserted" "0,1" newline bitfld.word 0x0 3. "mpllb_clk_en_reg,When asserted with bit 5 selects MPLLB clock as TX data output clock Only bit 3 or bit 4 or bit 1can be asserted" "0,1" newline bitfld.word 0x0 2. "ovrd_lb_en,If asserted it allows bit 1 takes control of RX clock loopback to TX" "0,1" newline bitfld.word 0x0 1. "clk_lb_en_reg,When asserted with bit 2 selects RX clock for TX data output clock" "0,1" newline bitfld.word 0x0 0. "override_regref_1,Use atb_s_m to override TX fast regulator reference voltage when asserted" "0,1" group.word 0x60284++0x1 line.word 0x0 "L0_ANA_TX_MISC,TX_MISC" bitfld.word 0x0 7. "override_rxdetref,If asserted atb_s_m is used to override RX detection reference voltage" "0,1" newline bitfld.word 0x0 6. "meas_atb_bias_vptx,Measure TX bias local vptx through atb_s_p when asserted" "0,1" newline bitfld.word 0x0 5. "osc_nmos,nmos device ring oscillator outputs from TX when asserted" "0,1" newline bitfld.word 0x0 4. "osc_pmos,pmos device ring oscillator outputs from TX when asserted" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "NC30,Reserved" group.word 0x60288++0x1 line.word 0x0 "L0_ANA_RX_ATB_IQSKEW,RX_ATB_IQSKEW" bitfld.word 0x0 7. "master_atb_en,If asserted enable RX ATB sensing bus atb_s_p/m visible externally." "0,1" newline bitfld.word 0x0 6. "meas_atb_vp,If asserted vp is measured through atb_s_p" "0,1" newline hexmask.word.byte 0x0 0.--5. 1. "iq_phase_adjust_reg,iq phase adjust reg." group.word 0x6028C++0x1 line.word 0x0 "L0_ANA_RX_DCC_OVRD,RX_DCC_OVRD" bitfld.word 0x0 7. "dcc_en_reg,When bit 6 is asserted this bit takes control of RX DCC enable" "0,1" newline bitfld.word 0x0 6. "ovrd_dccandafe_en,When asserted override RX DCC enable and AFE data rate by analog register" "0,1" newline bitfld.word 0x0 5. "word_clk_en_reg,If asserted it allows bit 4 to override rx word clock enable" "0,1" newline bitfld.word 0x0 4. "ovrd_word_clk_en,rx word clock enable/disable when bit 5 is asserted" "0,1" newline bitfld.word 0x0 2.--3. "meas_atb_vdcc,Meas_atb_vdcc<1:0>" "0,1,2,3" newline bitfld.word 0x0 0.--1. "afe_rate_reg,when bit 6 is asserted this (afe_rate_reg<1:0>) two bits override RX AFE rate which controls CTLE boost frequency" "0,1,2,3" group.word 0x60290++0x1 line.word 0x0 "L0_ANA_RX_PWR_CTRL1,RX_PWR_CTRL1" bitfld.word 0x0 7. "pwron_reg,When asserted with bit 6 enables AFE" "0,1" newline bitfld.word 0x0 6. "ovrd_pwron,If asserted bit 7 takes control of AFE enable/disable" "0,1" newline bitfld.word 0x0 5. "los_en_reg,If asserted bit 5 take control of LOS enable/disable" "0,1" newline bitfld.word 0x0 4. "ovrd_los_en,If asserted bit 5 take control of LOS enable/disable" "0,1" newline bitfld.word 0x0 3. "clk_en_reg,When asserted with bit 2 enables RX clock" "0,1" newline bitfld.word 0x0 2. "ovrd_clk_en,If asserted bit 3 take control of RX clock enable/disable" "0,1" newline bitfld.word 0x0 1. "acjt_en_reg,When asserted with bit 0 enables ACJTAG" "0,1" newline bitfld.word 0x0 0. "ovrd_acjt_en,If asserted bit 1 take control of ACJTAG enable/disable" "0,1" group.word 0x60294++0x1 line.word 0x0 "L0_ANA_RX_ATB_REGREF,RX_ATB_REGREF" bitfld.word 0x0 5.--7. "meas_atb_cal_mux,Meas_atb_cal_mux is 3 bit signal Meas_atb_cal_mux<2:0>" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "override_regref_clk,If asserted RX clock regulator reference is overridden through atb_s_m" "0,1" newline bitfld.word 0x0 3. "override_regref_scope,If asserted RX scope regulator reference is overridden through atb_s_m" "0,1" newline bitfld.word 0x0 2. "cdr_vco_dac_filt_bypass_reg,Bypass ibias active filter in mission mode when asserted" "0,1" newline bitfld.word 0x0 0.--1. "meas_atb_samp,Meas_atb_samp<1:0>" "0,1,2,3" group.word 0x60298++0x1 line.word 0x0 "L0_ANA_RX_CDR_AFE,RX_CDR_AFE" bitfld.word 0x0 7. "phdet_even_reg,If asserted CDR phase detector uses even data path" "0,1" newline bitfld.word 0x0 6. "phdet_odd_reg,If asserted CDR phase detector uses odd data path" "0,1" newline bitfld.word 0x0 5. "meas_sum_ereg,If asserted place even summer outp/m nodes on atb_s_p|m_int" "0,1" newline bitfld.word 0x0 4. "meas_sum_oreg,If asserted place odd summer outp/m nodes on atb_s_p|m_int" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "meas_atb_rx,This is meas_atb_rx<9:6> bit each bit correspond to ==>" group.word 0x6029C++0x1 line.word 0x0 "L0_ANA_RX_PWR_CTRL2,RX_PWR_CTRL2" bitfld.word 0x0 7. "loopback_en_reg,If asserted with bit 6 enables Tx to Rx data loopback" "0,1" newline bitfld.word 0x0 6. "ovrd_loopback_en,If asserted bit 7 takes control of TX to Rx data loopback enable/disable" "0,1" newline bitfld.word 0x0 5. "deserial_en_reg,If asserted with bit 4 enables Rx deserializer" "0,1" newline bitfld.word 0x0 4. "ovrd_des_en,If asserted bit 5 takes control of Rx deserializer enable/disable" "0,1" newline bitfld.word 0x0 3. "dfe_en_reg,If asserted with bit 2 enables RX DFE" "0,1" newline bitfld.word 0x0 2. "ovrd_dfe_en,If asserted bit 3 takes control of RX DFE enable/disable" "0,1" newline bitfld.word 0x0 0.--1. "afe_bias_cc,setting of the biasing current for neg-c peaking circuit in AFE" "0,1,2,3" group.word 0x602A0++0x1 line.word 0x0 "L0_ANA_RX_MISC_OVRD,RX_MISC_OVRD" bitfld.word 0x0 7. "ovrd_short_en,If asserted bit 6 enable/disables RX front short function" "0,1" newline bitfld.word 0x0 6. "shor_en_reg,If asserted with bit 7 RX input is shorted" "0,1" newline bitfld.word 0x0 5. "ovrd_rx_los_lfps_en,if asserted bit 4 enable/disables RX true LFPS detection" "0,1" newline bitfld.word 0x0 4. "rx_los_lfps_en_reg,if asserted with bit 5 enables true LFPS detection" "0,1" newline bitfld.word 0x0 3. "afe_ibias_inc_0,bit 0 of the two bit control of the AFE main bias currents" "0,1" newline bitfld.word 0x0 2. "loopback_clk_sel_reg,selects b/w iand qv phase for loopback clocks" "0,1" newline bitfld.word 0x0 1. "rx_loopback_clk_en_reg,loopback clk en ." "0,1" newline bitfld.word 0x0 0. "ovrd_rx_loopback_clk_en,overrides loopback en from digital and selects loopback_clk_en from regs" "0,1" group.word 0x602A4++0x1 line.word 0x0 "L0_ANA_RX_CAL_MUXA,RX_CAL_MUXA" bitfld.word 0x0 7. "ovrd_cal_muxa_sel,If asserted selects analog register setting to control RX calibration path A" "0,1" newline hexmask.word.byte 0x0 2.--6. 1. "cal_muxa_sel_reg,Analog registers to control RX calibration path A - if bit 7 is asserted this is cal_muxa_sel_reg<4:0>" newline bitfld.word 0x0 1. "meas_atb_vibias_vco,If asserted measure CDR VCO bias current through atb_s_p (25uA)" "0,1" newline bitfld.word 0x0 0. "meas_atv_vco_200u,If asserted measure CDR VCO bias current through atb_s_m (200uA)" "0,1" group.word 0x602A8++0x1 line.word 0x0 "L0_ANA_RX_ATB_MEAS1,RX_ATB_MEAS1" bitfld.word 0x0 7. "atb_frc_vlos,If asserted force los detection reference voltage through atb_s_m" "0,1" newline hexmask.word.byte 0x0 1.--6. 1. "meas_atb_rx,This is meas_atb_rx<5:0> bits where each bit correspond to" newline bitfld.word 0x0 0. "afe_att_cm_sel_n,If set to 0 this bit selects the Gm/R biasing for VCM_AFE generation if set to 1 this bit selects the Vbg/R biasing for VCM_AFE generation" "0,1" group.word 0x602AC++0x1 line.word 0x0 "L0_ANA_RX_ATB_MEAS2,RX_ATB_MEAS2" bitfld.word 0x0 7. "meas_gd,If asserted measure RX regulator local gd through atb_s_p" "0,1" newline bitfld.word 0x0 6. "meas_vreg_s,If asserted measure RX slow regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 5. "meas_vreg_clk,If asserted measure RX fast clock regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 4. "afe_eq_cm_sel,VCM reference of the ATT output" "0,1" newline bitfld.word 0x0 3. "meas_vreg_scope,If asserted measure RX fast scope regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 2. "meas_vreg_vco,If asserted measure RX VCO regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 1. "meas_atb_vco_gd,If asserted measure CDR VCO local gd through atb_s_m" "0,1" newline bitfld.word 0x0 0. "meas_atb_vco_vosc,If asserted measure CDR VCO oscillation bias current through atb_s_m" "0,1" group.word 0x602B0++0x1 line.word 0x0 "L0_ANA_RX_CAL_MUXB,RX_CAL_MUXB" bitfld.word 0x0 7. "ovrd_cal_muxb_sel,If asserted selects analog register setting to control RX calibration path B" "0,1" newline hexmask.word.byte 0x0 2.--6. 1. "cal_muxb_sel_reg,Analog registers to control RX calibration path B - if bit 7 is asserted this is cal_muxb_sel_reg<4:0>" newline bitfld.word 0x0 1. "ovrd_pwron_taps,If 1 allows for bit 0 to control DFE tap2 to tap5 currents" "0,1" newline bitfld.word 0x0 0. "dfe_taps_en_reg,If bit 1 is asserted controls DFE tap2 to tap5" "0,1" group.word 0x602B4++0x1 line.word 0x0 "L0_ANA_RX_TERM,RX_TERM" bitfld.word 0x0 7. "ovrd_rx_term_dc_en,If asserted the DC termination enable value is controlled via registers" "0,1" newline bitfld.word 0x0 6. "rx_term_dc_en_reg,If termination override is asserted controls the DC termination enable" "0,1" newline bitfld.word 0x0 5. "ovrd_rx_term_gd_en,If asserted the ground termination enable value is controlled via registers" "0,1" newline bitfld.word 0x0 4. "rx_term_gd_en_reg,If termination override is asserted controls the ground termination enable" "0,1" newline bitfld.word 0x0 3. "ovrd_iq_phase_adjust,If asserted the iq_phase_adjust value is controlled via registers" "0,1" newline bitfld.word 0x0 2. "afe_ibias_inc_1,bit 1 of the two bit control of the AFE main bias currents" "0,1" newline bitfld.word 0x0 0.--1. "afe_att_cm_regs,2 bit control of the vcm_eq voltage to be used as the ATT common mode reference voltage" "0,1,2,3" group.word 0x602B8++0x1 line.word 0x0 "L0_ANA_RX_SLC_CTRL,RX_SLC_CTRL" hexmask.word.byte 0x0 4.--7. 1. "rx_slicer_ctrl_e_reg,If ovrd_rx_slicer_ctrl_reg is asserted controls the even slicer configuration" newline hexmask.word.byte 0x0 0.--3. 1. "rx_slicer_ctrl_o_reg,If ovrd_rx_slicer_ctrl_reg is asserted controls the odd slicer configuration" group.word 0x602BC++0x1 line.word 0x0 "L0_ANA_RX_ATB_VREG,RX_ATB_VREG" bitfld.word 0x0 7. "ovrd_regref_iqc,If asserted main PMIX regulator reference is overridden through atb_s_m" "0,1" newline bitfld.word 0x0 6. "ovrd_regref_iqc_scope,If asserted scope PMIX regulator reference is overridden through atb_s_m" "0,1" newline bitfld.word 0x0 5. "meas_atb_vreg_dfe,If asserted measure RX fast DFE regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 4. "meas_atb_vreg_dfe_byp,If asserted measure RX fast DFE bypass regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 3. "meas_atb_vreg_iqc,If asserted measure RX fast main PMIX regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 2. "meas_atb_vreg_iqc_scope,If asserted measure RX fast scope PMIX regulator output voltage through atb_s_p" "0,1" newline bitfld.word 0x0 1. "ovrd_iqc_vref_sel,If asserted the vref on the iqc regulator is controlled via registers" "0,1" newline bitfld.word 0x0 0. "ovrd_rx_slicer_ctrl_reg,If asserted the slicer configuration value is controlled via registers" "0,1" group.word 0x602C0++0x1 line.word 0x0 "L0_ANA_RX_CDR_VCO_CTRL,RX_CDR_VCO_CTRL" hexmask.word.byte 0x0 4.--7. 1. "creg_cdr_vco_misc_ctrl,creg_cdr_vco_misc_ctrl" newline bitfld.word 0x0 2.--3. "creg_cdr_vco_lowfreq,bit 1 shuts off part of ibias current mirrors when asserted bit 0 engages varactor in oscillator when asserted" "0,1,2,3" newline bitfld.word 0x0 1. "creg_rx_vco_vreg_bypass,forces vreg_rx_vco to vph (regulator bypass) when asserted" "0,1" newline bitfld.word 0x0 0. "afe_att_cm_regs_ovrd,if asserted the rx_misc<4:3> is overridden by the afe_att_cm_regs for setting the vcm_eq level" "0,1" group.word 0x602C4++0x1 line.word 0x0 "L0_XF_TX_OVRD_IN,Override values for incoming TX controls from PCS" bitfld.word 0x0 14. "MSTR_MPLLB_STATE_OVRD_EN,Override enable for tx_master_mpllb_state" "0,1" newline bitfld.word 0x0 13. "MSTR_MPLLA_STATE_OVRD_EN,Override enable for tx_master_mplla_state" "0,1" newline bitfld.word 0x0 12. "OVRD_EN,Override enable for all input signals below Input signals overridden by it:" "0,1" newline bitfld.word 0x0 11. "MSTR_MPLLB_STATE,Override value for tx_master_mpllb_state." "0,1" newline bitfld.word 0x0 10. "MSTR_MPLLA_STATE,Override value for tx_master_mplla_state." "0,1" newline bitfld.word 0x0 9. "MPLL_EN,Override value for tx_mpll_en." "0,1" newline bitfld.word 0x0 8. "MPLLB_SEL,Override value for tx_mpllb_sel." "0,1" newline bitfld.word 0x0 5.--7. "RATE,Override value for tx_rate." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--4. "WIDTH,Override value for tx_width." "0,1,2,3" newline bitfld.word 0x0 2. "LPD,Override value for tx_lpd." "0,1" newline bitfld.word 0x0 0.--1. "PSTATE,Override value for tx_pstate." "0,1,2,3" group.word 0x602C8++0x1 line.word 0x0 "L0_XF_TX_OVRD_IN_1,Override values for incoming TX controls from PCS. register #1" bitfld.word 0x0 12. "IBST_LVL_OVRD_EN,Override enable for tx_iboost_lvl[3:0] Input signal overridden by it: tx_iboost_lvl" "0,1" newline hexmask.word.byte 0x0 8.--11. 1. "IBST_LVL_OVRD_VAL,Override value for tx_iboost_lvl[3:0]." newline bitfld.word 0x0 7. "VBST_EN_OVRD_EN,Override enable for tx_vboost_en." "0,1" newline bitfld.word 0x0 6. "VBST_EN_OVRD_VAL,Override value for tx_vboost_en." "0,1" newline bitfld.word 0x0 5. "DETRX_REQ_OVRD_EN,Override enable for tx_detrx_req Input signal overridden by it: tx_detrx_req" "0,1" newline bitfld.word 0x0 4. "DETRX_REQ_OVRD_VAL,Override value for tx_detrx_req." "0,1" newline bitfld.word 0x0 3. "REQ_OVRD_EN,Override enable for tx_req." "0,1" newline bitfld.word 0x0 2. "REQ_OVRD_VAL,Override value for tx_req." "0,1" newline bitfld.word 0x0 1. "RESET_OVRD_EN,Override enable for tx_reset Input signal overridden by it: tx_reset" "0,1" newline bitfld.word 0x0 0. "RESET_OVRD_VAL,Override value for tx_reset." "0,1" rgroup.word 0x602CC++0x1 line.word 0x0 "L0_XF_TX_PCS_IN,Current values for incoming TX controls from PCS (pre-override Input Monitor)" bitfld.word 0x0 14. "DETRX_REQ,Value from PCS for tx_detrx_req" "0,1" newline bitfld.word 0x0 13. "MSTR_MPLLA_STATE,Value from PCS for tx_master_mplla_state" "0,1" newline bitfld.word 0x0 12. "MSTR_MPLLB_STATE,Value from PCS for tx_master_mpllb_state" "0,1" newline bitfld.word 0x0 11. "MPLL_EN,Value from PCS for tx_mpll_en" "0,1" newline bitfld.word 0x0 10. "MPLLB_SEL,Value from PCS for tx_mpllb_sel" "0,1" newline bitfld.word 0x0 7.--9. "RATE,Value from PCS for tx_rate" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 5.--6. "WIDTH,Value from PCS for tx_width" "0,1,2,3" newline bitfld.word 0x0 4. "LPD,Value from PCS for tx_lpd" "0,1" newline bitfld.word 0x0 2.--3. "PSTATE,Value from PCS for tx_pstate" "0,1,2,3" newline bitfld.word 0x0 1. "REQ,Value from PCS for tx_req" "0,1" newline bitfld.word 0x0 0. "RESET,Value from PCS for tx_reset" "0,1" group.word 0x602D0++0x1 line.word 0x0 "L0_XF_TX_OVRD_OUT,Override values for outgoing TX controls to PCS" bitfld.word 0x0 2. "EN_CTL,Enable override values for all control outputs of this register Output Signal overridden by it: tx_detrx_result tx_ack" "0,1" newline bitfld.word 0x0 1. "DETRX_RESULT,Override value for tx_detrx_result." "0,1" newline bitfld.word 0x0 0. "ACK,Override value for tx_ack." "0,1" rgroup.word 0x602D4++0x1 line.word 0x0 "L0_XF_TX_PCS_OUT,Current values for outgoing TX status controls from Raw PCS (pre-override Output Monitor)" bitfld.word 0x0 0. "ACK,Value from Raw PCS for tx_ack" "0,1" group.word 0x602D8++0x1 line.word 0x0 "L0_XF_RX_OVRD_IN,Override values for incoming RX controls from PCS" bitfld.word 0x0 8. "DFE_BYP,Override value for rx_dfe_bypass." "0,1" newline bitfld.word 0x0 7. "OVRD_EN,Enable override values for all fields in this register Input signals overridden by it:" "0,1" newline bitfld.word 0x0 6. "LPD,Override value for rx_lpd." "0,1" newline bitfld.word 0x0 4.--5. "PSTATE,Override value for rx_pstate." "0,1,2,3" newline bitfld.word 0x0 2.--3. "WIDTH,Override value for rx_width." "0,1,2,3" newline bitfld.word 0x0 0.--1. "RATE,Override value for rx_rate." "0,1,2,3" group.word 0x602DC++0x1 line.word 0x0 "L0_XF_RX_OVRD_IN_1,Override values for incoming RX controls from PCS. register #1" bitfld.word 0x0 3. "REQ_OVRD_EN,Override enable for rx_req Input signals overridden by it: rx_req" "0,1" newline bitfld.word 0x0 2. "REQ_OVRD_VAL,Override value for rx_req." "0,1" newline bitfld.word 0x0 1. "RESET_OVRD_EN,Override enable for rx_reset Input signals overridden by it: rx_reset" "0,1" newline bitfld.word 0x0 0. "RESET_OVRD_VAL,Override value for rx_reset." "0,1" group.word 0x602E0++0x1 line.word 0x0 "L0_XF_RX_OVRD_IN_2,Override values for incoming RX controls from PCS. register #2" bitfld.word 0x0 13. "VCO_LD_VAL_OVRD_EN,Enable override for rx_vco_ld_val Input signals overridden by it: rx_vco_ld_val" "0,1" newline hexmask.word 0x0 0.--12. 1. "VCO_LD_VAL_OVRD,Override value for rx_vco_ld_val." group.word 0x602E4++0x1 line.word 0x0 "L0_XF_ATE_OVRD_IN_2,ATE Override input to control top-level inputs. register #3" bitfld.word 0x0 8. "CONT_OVRD_EN,Enable override values for rx_adapt_cont and rx_offcan_cont Input signals overridden by it: rx_adapt_cont rx_offcan_cont" "0,1" newline bitfld.word 0x0 7. "OFFCAN_CONT,Override value for rx_offcan_cont." "0,1" newline bitfld.word 0x0 6. "ADPT_CONT,Override value for rx_adapt_cont." "0,1" newline bitfld.word 0x0 5. "ADPT_REQ_OVRD_EN,Enable override values for rx_adapt_req Input signals overridden by it: rx_adapt_req" "0,1" newline bitfld.word 0x0 4. "ADPT_REQ,Override value for rx_adapt_req." "0,1" newline bitfld.word 0x0 3. "RX_LOS_THR_OVRD_EN,Enable override for rx_los_threshold." "0,1" newline bitfld.word 0x0 0.--2. "RX_LOS_THR_OVRD_VAL,Override value for rx_los_threshold." "0,1,2,3,4,5,6,7" rgroup.word 0x602E8++0x1 line.word 0x0 "L0_XF_RX_PCS_IN,Current values for incoming RX controls from PCS (Monitor on post ATE override)" bitfld.word 0x0 14. "RESET,Value from PCS for rx_reset" "0,1" newline bitfld.word 0x0 13. "OFFCAN_CONT,Value from PCS for rx_offcan_cont" "0,1" newline bitfld.word 0x0 12. "ADPT_CONT,Value from PCS for rx_adapt_cont" "0,1" newline bitfld.word 0x0 11. "ADPT_REQ,Value from PCS for rx_adapt_req" "0,1" newline bitfld.word 0x0 10. "RX_DFE_BYP,Value from PCS for rx_dfe_bypass" "0,1" newline bitfld.word 0x0 8.--9. "CDR_VCO_FBAND,Value from PCS for rx_cdr_vco_freqband" "0,1,2,3" newline bitfld.word 0x0 7. "LPD,Value from PCS for rx_lpd" "0,1" newline bitfld.word 0x0 5.--6. "PSTATE,Value from PCS for rx_pstate" "0,1,2,3" newline bitfld.word 0x0 3.--4. "WIDTH,Value from PCS for rx_width" "0,1,2,3" newline bitfld.word 0x0 1.--2. "RATE,Value from PCS for rx_rate" "0,1,2,3" newline bitfld.word 0x0 0. "REQ,Value from PCS for rx_req" "0,1" rgroup.word 0x602EC++0x1 line.word 0x0 "L0_XF_RX_PCS_IN_1,Current values for incoming RX controls from PCS. register #1 (Monitor on pre-override signals)" hexmask.word.byte 0x0 0.--6. 1. "REF_LD_VAL,Value from PCS for rx_ref_ld_val" rgroup.word 0x602F0++0x1 line.word 0x0 "L0_XF_RX_PCS_IN_2,Current values for incoming RX controls from PCS. register #2 (Monitor on the pre-override signals)" hexmask.word 0x0 0.--12. 1. "VCO_LD_VAL,Value from PCS for rx_vco_ld_val" rgroup.word 0x602F4++0x1 line.word 0x0 "L0_XF_RX_PCS_IN_3,Current values for incoming RX controls from PCS. register #3 ((Monitor on the pre-override signals)" hexmask.word.byte 0x0 9.--13. 1. "EQ_CTLE_BST,Value from ASIC for rx_eq_ctle_boost" newline bitfld.word 0x0 6.--8. "EQ_VGA2_G,Value from ASIC for rx_eq_vga2_gain" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "EQ_VGA1_G,Value from ASIC for rx_eq_vga1_gain" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "EQ_ATT_LVL,Value from ASIC for rx_eq_att_lvl" "0,1,2,3,4,5,6,7" rgroup.word 0x602F8++0x1 line.word 0x0 "L0_XF_RX_PCS_IN_4,Current values for incoming RX controls from PCS. register #4 ((Monitor on the pre-override signals)" hexmask.word.byte 0x0 2.--9. 1. "EQ_DFE_TAP1,Value from ASIC for rx_eq_dfe_tap1" newline bitfld.word 0x0 0.--1. "EQ_CTLE_POLE,Value from ASIC for rx_eq_ctle_pole" "0,1,2,3" group.word 0x602FC++0x1 line.word 0x0 "L0_XF_RX_OVRD_OUT,Override values for outgoing RX controls to PCS" bitfld.word 0x0 1. "EN_CTL,Enable override values for all control outputs of this register Output Signal overridden by it rx_ack" "0,1" newline bitfld.word 0x0 0. "ACK,Override value for rx_ack Its override enable is RX_OVRD_OUT." "0,1" rgroup.word 0x60300++0x1 line.word 0x0 "L0_XF_RX_PCS_OUT,Current values for outgoing RX status controls from Raw PCS" bitfld.word 0x0 0. "ACK,Value from Raw PCS for rx_ack" "0,1" group.word 0x60304++0x1 line.word 0x0 "L0_XF_RX_ADPT_ACK,RX Adaptation Acknowledge" bitfld.word 0x0 0. "RX_ADPT_ACK,RX Adaptation Acknowledge" "0,1" group.word 0x60308++0x1 line.word 0x0 "L0_XF_RX_ADPT_FOM,RX Adaptation Figure of Merit" hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_FOM,RX Adaptation Figure of Merit" group.word 0x6030C++0x1 line.word 0x0 "L0_XF_RX_TXPRE_DIR,RX calculated direction for TX-pre" bitfld.word 0x0 0.--1. "RX_TXPRE_DIR,RX calculated direction for TX-pre" "0,1,2,3" group.word 0x60310++0x1 line.word 0x0 "L0_XF_RX_TXMAIN_DIR,RX calculated direction for TX-Main" bitfld.word 0x0 0.--1. "RX_TXMAIN_DIR,RX calculated direction for TX-Main" "0,1,2,3" group.word 0x60314++0x1 line.word 0x0 "L0_XF_RX_TXPOST_DIR,RX calculated direction for TX-Post" bitfld.word 0x0 0.--1. "RX_TXPOST_DIR,RX calculated direction for TX-Post" "0,1,2,3" rgroup.word 0x60318++0x1 line.word 0x0 "L0_XF_L_NUMBER,Current lane number" hexmask.word.byte 0x0 0.--3. 1. "LANE_NUMBER,Current lane number" group.word 0x6031C++0x1 line.word 0x0 "L0_XF_ATE_OVRD_IN,ATE Override input to control top-level inputs. register #1" bitfld.word 0x0 15. "RX_WIDTH_ATE_OVRD_EN,Enable ATE override value for rx_width input" "0,1" newline bitfld.word 0x0 13.--14. "RX_WIDTH_ATE_OVRD_VAL,ATE Override value for rx_width input" "0,1,2,3" newline bitfld.word 0x0 12. "RX_RATE_ATE_OVRD_EN,Enable ATE override value for rx_rate input" "0,1" newline bitfld.word 0x0 10.--11. "RX_RATE_ATE_OVRD_VAL,ATE Override value for rx_rate input" "0,1,2,3" newline bitfld.word 0x0 9. "RX_DFE_BYP_ATE_OVRD_EN,Enable ATE override value for rx_dfe_bypass input" "0,1" newline bitfld.word 0x0 8. "RX_DFE_BYP_ATE_OVRD_VAL,ATE Override value for rx_dfe_bypass input" "0,1" newline bitfld.word 0x0 7. "TX_REQ_ATE_OVRD_EN,Enable ATE override vale for tx_req input" "0,1" newline bitfld.word 0x0 6. "TX_REQ_ATE_OVRD_VAL,ATE Override value for top-level tx_req input" "0,1" newline bitfld.word 0x0 5. "RX_REQ_ATE_OVRD_EN,Enable ATE override value for rx_req input" "0,1" newline bitfld.word 0x0 4. "RX_REQ_ATE_OVRD_VAL,ATE Override value for top-level rx_req input" "0,1" newline bitfld.word 0x0 3. "TX_RESET_ATE_OVRD_EN,Enable ATE override value for tx_reset input" "0,1" newline bitfld.word 0x0 2. "TX_RESET_ATE_OVRD_VAL,ATE Override value for top-level tx_reset input" "0,1" newline bitfld.word 0x0 1. "RX_RESET_ATE_OVRD_EN,Enable ATE override value for rx_reset input" "0,1" newline bitfld.word 0x0 0. "RX_RESET_ATE_OVRD_VAL,ATE Override value for top-level rx_reset input" "0,1" group.word 0x60320++0x1 line.word 0x0 "L0_XF_RX_OVRD_OUT_1,Overrides the RX Output Clocks during the PHY Initialization. register #1" bitfld.word 0x0 1. "RX_DIV16P5_CLK_EN,Enable the outgoing rx_div16p5_clk" "0,1" newline bitfld.word 0x0 0. "RX_CLK_EN,Enable the outgoing rx_clk" "0,1" group.word 0x60324++0x1 line.word 0x0 "L0_XF_RX_OVRD_IN_4,Override values for incoming RX controls from PCS. register #4" bitfld.word 0x0 14. "REF_LD_VAL_OVRD_EN,Enable override for rx_ref_ld_val Input signals overridden by it rx_ref_ld_val" "0,1" newline hexmask.word.byte 0x0 7.--13. 1. "REF_LD_VAL_OVRD,Override value for rx_ref_ld_val." newline bitfld.word 0x0 6. "VCO_FBAND_VAL_OVRD_EN,Enable override for rx_cdr_vco_freqband Input signals overridden by it: rx_cdr_vco_freqband" "0,1" newline bitfld.word 0x0 4.--5. "VCO_FBAND_VAL_OVRD,Override value for rx_cdr_vco_freqband." "0,1,2,3" newline bitfld.word 0x0 3. "RX_CDR_VCO_TMP_CMP_EN_OVRD_EN,Enable override for rx_cdr_vco_temp_comp_en Input signals overridden by it: rx_cdr_vco_temp_comp_en" "0,1" newline bitfld.word 0x0 2. "RX_CDR_VCO_TMP_CMP_EN_OVRD_VAL,Override value for rx_cdr_vco_temp_comp_en." "0,1" newline bitfld.word 0x0 1. "RX_CDR_VCO_STP_CTRL_OVRD_EN,Enable override for rx_cdr_vco_step_ctrl Input signals overridden by it: rx_cdr_vco_step_ctrl" "0,1" newline bitfld.word 0x0 0. "RX_CDR_VCO_STP_CTRL_OVRD_VAL,Override value for rx_cdr_vco_step_ctrl." "0,1" group.word 0x60328++0x1 line.word 0x0 "L0_XF_RX_OVRD_IN_5,rx adaptation mode override register" bitfld.word 0x0 14. "ADPT_REQ_OVRD_EN,Enable override values for rx_adapt_req Input signals overridden by it: rx_adapt_req" "0,1" newline bitfld.word 0x0 13. "ADPT_REQ,Override value for rx_adapt_req." "0,1" newline bitfld.word 0x0 12. "RX_ADPT_IN_PROG_OVRD_EN,Enable override for RX adaptation in progress Input signals overridden by it: rx_adapt_in_prog" "0,1" newline bitfld.word 0x0 11. "RX_ADPT_IN_PROG_OVRD,Overridden value for the RX adaptation in progress." "0,1" newline bitfld.word 0x0 10. "RX_CDR_PPM_MAX_OVRD_EN,Enable overidde for the RX CDR PPM Max Input signals overridden by it: rx_cdr_ppm_max" "0,1" newline hexmask.word.byte 0x0 5.--9. 1. "RX_CDR_PPM_MAX_OVRD,Overidden value for RX CDR PPM Max." newline bitfld.word 0x0 4. "RX_ADPT_MODE_OVRD_EN,Enable override for the RX adaptation mode Input signals overridden by it: rx_adapt_mode" "0,1" newline bitfld.word 0x0 2.--3. "RX_ADPT_MODE,Overridden value for RX adaptation mode." "0,1,2,3" newline bitfld.word 0x0 1. "RX_ADPT_SEL_OVRD_EN,Enable override the RX adaptation setting Input signals overridden by it: rx_adapt_sel" "0,1" newline bitfld.word 0x0 0. "RX_ADPT_SEL_OVRD,Overridden value for the RX adaptation setting." "0,1" rgroup.word 0x6032C++0x1 line.word 0x0 "L0_XF_RX_PCS_IN_5,Current values for incoming RX controls from PCS. register #5" bitfld.word 0x0 14. "RX_ADPT_IN_PROG,Value from ASIC for rx_adapt_in_prog" "0,1" newline hexmask.word.byte 0x0 7.--13. 1. "RX_MARGIN_IQ,Value from ASIC for rx_margin_iq" newline hexmask.word.byte 0x0 3.--6. 1. "RX_DELTA_IQ,Value from ASIC for rx_delta_iq" newline bitfld.word 0x0 2. "RX_ADPT_SEL,Value from ASIC for rx_adapt_sel" "0,1" newline bitfld.word 0x0 0.--1. "ADPT_MODE,Value from ASIC for rx_adapt_mode" "0,1,2,3" group.word 0x60330++0x1 line.word 0x0 "L0_XF_RX_OVRD_IN_6,override register for rx IQ setting" bitfld.word 0x0 12. "RX_MARGIN_DELTA_OVRD_EN,Enable Override the rx margin IQ setting Input signals overridden by it: rx_margin_iq" "0,1" newline hexmask.word.byte 0x0 5.--11. 1. "RX_MARGIN_DELTA_OVRD,Override the rx margin IQ setting." newline bitfld.word 0x0 4. "RX_DELTA_IQ_OVRD_EN,Enable Override the rx Delta IQ setting Input signals overridden by it: rx_delta_iq" "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "RX_DELTA_IQ_OVRD,Override the rx Delta IQ seeting." group.word 0x60334++0x1 line.word 0x0 "L0_XF_RX_EQ_OVRD_IN_1,Override values for incoming RX EQ controls from PCS. register #1" bitfld.word 0x0 9. "RX_EQ_OVRD_EN,Enable override values for all RX EQ settings Input signals overridden by it:" "0,1" newline bitfld.word 0x0 6.--8. "RX_EQ_ATT_LVL_OVRD_VAL,Override value for rx_eq_att_lvl[2:0]." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 3.--5. "RX_EQ_VGA2_G_OVRD_VAL,Override value for rx_eq_vga2_gain[3:0]." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "RX_EQ_VGA1_G_OVRD_VAL,Override value for rx_eq_vga1_gain[3:0]." "0,1,2,3,4,5,6,7" rgroup.word 0x60338++0x1 line.word 0x0 "L0_XF_RX_PCS_IN_6,Current values for incoming RX controls from PCS. register #6" hexmask.word.byte 0x0 5.--12. 1. "RX_MISC,Value from ASIC fro rx_misc" newline hexmask.word.byte 0x0 0.--4. 1. "RX_CDR_PPM_MAX,Value from ASIC for rx_cdr_ppm_max" group.word 0x6033C++0x1 line.word 0x0 "L0_XF_ATE_OVRD_IN_1,ATE Override input to control top-level inputs. register #2" bitfld.word 0x0 11. "RX_ADPT_SEL_ATE_OVRD_EN,Enable ATE override value for rx_adapt_sel input" "0,1" newline bitfld.word 0x0 10. "RX_ADPT_SEL_ATE_OVRD_VAL,ATE Override value for top-level rx_adapt_sel input" "0,1" newline bitfld.word 0x0 9. "RX_DELTA_IQ_ATE_OVRD_EN,Enable ATE override value for rx_delta_iq input" "0,1" newline hexmask.word.byte 0x0 5.--8. 1. "RX_DELTA_IQ_ATE_OVRD_VAL,ATE Override value for top-level rx_delta_iq input" newline bitfld.word 0x0 4. "RX_LPD_ATE_OVRD_EN,Enable ATE override value for rx_lpd input" "0,1" newline bitfld.word 0x0 3. "RX_LPD_ATE_OVRD_VAL,ATE Override value for top-level rx_lpd input" "0,1" newline bitfld.word 0x0 2. "RX_PSTATE_ATE_OVRD_EN,Enable ATE override value for rx_pstate input" "0,1" newline bitfld.word 0x0 0.--1. "RX_PSTATE_ATE_OVRD_VAL,ATE Override value for top-level rx_pstate input" "0,1,2,3" group.word 0x60340++0x1 line.word 0x0 "L0_XF_RX_EQ_OVRD_IN_2,Override values for incoming RX EQ controls from PCS. register #2" bitfld.word 0x0 13.--14. "RX_EQ_CTLE_POLE_OVRD_VAL,Override value for rx_eq_ctle_pole[2:0]." "0,1,2,3" newline hexmask.word.byte 0x0 8.--12. 1. "RX_EQ_CTLE_BST_OVRD_VAL,Override value for rx_eq_ctle_boost[4:0]." newline hexmask.word.byte 0x0 0.--7. 1. "RX_EQ_DFE_TAP1_OVRD_VAL,Override value for rx_eq_dfe_tap1[7:0] Its override enable is: RX_EQ_OVRD_IN_1." group.word 0x60344++0x1 line.word 0x0 "L0_FSM_OVRD_CTL,FSM override control register" bitfld.word 0x0 14. "FSM_OVRD_EN,Enable overriding the FSM execution of commands Must be asserted to use FSM_CMD_START and FSM_JMP_EN features" "0,1" newline bitfld.word 0x0 13. "FSM_CMD_START,Execute the current command or resume from breakpoint This is a self-clearing bit" "0,1" newline bitfld.word 0x0 12. "FSM_JMP_EN,Force the FSM to jump to FSM_JMP_ADDR in the program memory Is applied when FSM_CMD_START is pulsed." "0,1" newline hexmask.word 0x0 0.--11. 1. "FSM_JMP_ADDR,The jump address used when FSM_JUMP_EN=1 The address is encoded as follows: [11:8] mem_lane [7:5] bank [4:0] register" group.word 0x60348++0x1 line.word 0x0 "L0_FSM_JMP_BK,FSM Jump Bank Register" bitfld.word 0x0 0.--1. "BK,The jump bank used when FSM_JUMP_EN=1 This bank need to be updated accordingly along with FSM_OVRD_CTL." "0,1,2,3" group.word 0x6034C++0x1 line.word 0x0 "L0_MEM_BREAKPOINT_0,FSM Breakpoint 0 on SRAM Address for Debugging" bitfld.word 0x0 14. "BREAKPOINT_EN,Enables the Breakpoint 0 Clearing this bit will automatically resume the FSM if it is stopped at MEM_BREAKPOINT_0." "0,1" newline hexmask.word 0x0 0.--13. 1. "BREAKPOINT_ADDR,Memory Address for Breakpoint 0" group.word 0x60350++0x1 line.word 0x0 "L0_MEM_BREAKPOINT_1,FSM Breakpoint 1 on SRAM Address for Debugging" bitfld.word 0x0 14. "BREAKPOINT_EN,Enables the Breakpoint 1 Clearing this bit will automatically resume the FSM if it is stopped at MEM_BREAKPOINT_1." "0,1" newline hexmask.word 0x0 0.--13. 1. "BREAKPOINT_ADDR,Memory Address for Breakpoint 1" rgroup.word 0x60354++0x1 line.word 0x0 "L0_MEM_ADDR_MON,Memory Address Monitor" hexmask.word 0x0 0.--15. 1. "MEM_ADDR,Current value of memory address used in Lane FSM" rgroup.word 0x60358++0x1 line.word 0x0 "L0_STATUS_MON,FSM Status Monitor" bitfld.word 0x0 10. "RDMSK_DISD,Check if read mask is currently disabled (i." "0,1" newline bitfld.word 0x0 9. "WRMSK_DISD,Check if write mask is currently disabled (i." "0,1" newline bitfld.word 0x0 8. "WAIT_CNT_EQ0,Check if wait counter currently equals zero" "0,1" newline bitfld.word 0x0 7. "ALU_RES_EQ0,Check if ALU result register currently equals zero" "0,1" newline bitfld.word 0x0 6. "ALU_OVFLW,Current value of ALU overflow bit" "0,1" newline bitfld.word 0x0 5. "CMD_RDY,New command is ready for execution (applicable when FSM_OVRD_EN=1)" "0,1" newline hexmask.word.byte 0x0 0.--4. 1. "STATE,Current state of Lane FSM" rgroup.word 0x6035C++0x1 line.word 0x0 "L0_FST_RX_SU_CAL,Status of Fast RX Start Up Calibration" bitfld.word 0x0 0. "FST_RX_SU_CAL,Status of fast RX start-up calibration" "0,1" rgroup.word 0x60360++0x1 line.word 0x0 "L0_FST_RX_ADPT,Status of Fast RX Adaptation" bitfld.word 0x0 0. "FST_RX_ADPT,Status of fast RX adaptation" "0,1" rgroup.word 0x60364++0x1 line.word 0x0 "L0_FST_SUP,Status of Fast Support block" bitfld.word 0x0 0. "FST_SUP,Status of fast Support block (MPLL and Rtune)" "0,1" rgroup.word 0x60368++0x1 line.word 0x0 "L0_FST_TX_CMN_MODE,Status of Fast TX Common-mode Charge-up" bitfld.word 0x0 0. "FST_TX_CMN_MODE,Status of fast TX Common-mode Charge-up" "0,1" rgroup.word 0x6036C++0x1 line.word 0x0 "L0_FST_TX_RXDET,Status of Fast TX detect RX" bitfld.word 0x0 0. "FST_TX_RXDET,Status of fast TX detect RX" "0,1" rgroup.word 0x60370++0x1 line.word 0x0 "L0_FST_RX_PU,Status of Fast RX Power-up" bitfld.word 0x0 0. "FST_RX_PU,Status of fast RX Power-up (LOS VREG/AFE and DCC)" "0,1" rgroup.word 0x60374++0x1 line.word 0x0 "L0_FST_RX_VCO_WAIT,Status of Fast RX VCO Wait Times" bitfld.word 0x0 0. "FST_RX_VCO_WAIT,Status of fast RX VCO wait times" "0,1" rgroup.word 0x60378++0x1 line.word 0x0 "L0_FST_RX_VCO_CAL,Status of Fast RX VCO Calibration" bitfld.word 0x0 0. "FST_RX_VCO_CAL,Status of fast RX VCO Calibration" "0,1" rgroup.word 0x6037C++0x1 line.word 0x0 "L0_FST_RX_CONT_CAL_ADPT,Status of Fast RX Continuous Calibration/Adaptation" bitfld.word 0x0 0. "FST_RX_CONT_CAL_ADPT,Status of fast RX continuous calibration/adaptation" "0,1" rgroup.word 0x60380++0x1 line.word 0x0 "L0_FST_RX_CONT_ADPT,Status of Fast RX Continuous Adaptation" bitfld.word 0x0 0. "FST_RX_CONT_ADPT,Status of fast RX continuous adaptation" "0,1" rgroup.word 0x60384++0x1 line.word 0x0 "L0_SKIP_RX_AFE_SU_CAL,Status of RX AFE Startup Calibration" bitfld.word 0x0 0. "SKIP_RX_AFE_SU_CAL,Status of RX AFE start-up calibration" "0,1" rgroup.word 0x60388++0x1 line.word 0x0 "L0_SKIP_RX_DFE_SU_CAL,Status of RX DFE Startup Calibration" bitfld.word 0x0 0. "SKIP_RX_DFE_SU_CAL,Status of RX DFE Startup Calibration" "0,1" rgroup.word 0x6038C++0x1 line.word 0x0 "L0_SKIP_RX_DFE_EXT_SU_CAL,Status of DFE extended start-up Calibration" bitfld.word 0x0 0. "SKIP_RX_DFE_EXT_SU_CAL,Status of DFE extended start-up Calibration" "0,1" rgroup.word 0x60390++0x1 line.word 0x0 "L0_SKIP_RX_IQ_DELTA_SU,Status of RX IQ Fixed Offset" bitfld.word 0x0 0. "SKIP_RX_IQ_DELTA_SU,Status of RX IQ Fixed Offset" "0,1" rgroup.word 0x60394++0x1 line.word 0x0 "L0_SKIP_RX_IQ_SU_CAL,Status of RX IQ start-up calibration" bitfld.word 0x0 0. "SKIP_RX_IQ_SU_CAL,Status of RX IQ start-up calibration" "0,1" rgroup.word 0x60398++0x1 line.word 0x0 "L0_SKIP_RX_AFE_SU_ADPT,Status of RX AFE start-up Adaptation" bitfld.word 0x0 0. "SKIP_RX_AFE_SU_ADPT,Status of RX AFE DAC start-up adaptation" "0,1" rgroup.word 0x6039C++0x1 line.word 0x0 "L0_SKIP_RX_DFE_SU_ADPT,Status of RX DFE start-up Adaptation" bitfld.word 0x0 0. "SKIP_RX_DFE_SU_ADPT,Status of RX DFE DAC start-up adaptation" "0,1" rgroup.word 0x603A0++0x1 line.word 0x0 "L0_SKIP_RX_IQ_SU_ADPT,Status of RX IO Start-up Adaptation" bitfld.word 0x0 0. "SKIP_RX_IQ_SU_ADPT,Status of RX IQ start-up adaptation" "0,1" rgroup.word 0x603A4++0x1 line.word 0x0 "L0_SKIP_RX_CONT_PH_CAL,Status of RX Continuous Phase Calibration" bitfld.word 0x0 0. "SKIP_RX_CONT_PH_CAL,Status of RX continuous phase calibration" "0,1" rgroup.word 0x603A8++0x1 line.word 0x0 "L0_SKIP_RX_AFE_CONT_CAL,Status of RX AFE Continuous Calibration" bitfld.word 0x0 0. "SKIP_RX_AFE_CONT_CAL,Status of RX AFE continuous calibration" "0,1" rgroup.word 0x603AC++0x1 line.word 0x0 "L0_SKIP_RX_REFLVL_CONT_ADPT,Status of RX Reference Level Continuous Adaptation" bitfld.word 0x0 0. "SKIP_RX_REFLVL_CONT_ADPT,Status of RX Reference Level continuous adaptation" "0,1" rgroup.word 0x603B0++0x1 line.word 0x0 "L0_SKIP_RX_VGA_CONT_ADPT,Status of RX VGA Continuous Adaptation" bitfld.word 0x0 0. "SKIP_RX_VGA_CONT_ADPT,Status of RX VGA continuous adaptation" "0,1" rgroup.word 0x603B4++0x1 line.word 0x0 "L0_SKIP_RX_PHS_SU_CAL,Status of RX Phase Start-up Calibration" bitfld.word 0x0 0. "SKIP_RX_PHS_SU_CAL,Status of RX Phase start-up calibration" "0,1" rgroup.word 0x603B8++0x1 line.word 0x0 "L0_SKIP_RX_PHS_EXT_SU_CAL,Status of RX Phase Extended Start-up Calibration" bitfld.word 0x0 0. "SKIP_RX_PHS_EXT_SU_CAL,Status of RX Phase extended start-up calibration" "0,1" group.word 0x603BC++0x1 line.word 0x0 "L0_FW_STATES_1,Stores various states for Firmware - State #2" hexmask.word 0x0 0.--15. 1. "SPARE_STATE_0,Spare fields to be used by Firmware" group.word 0x603C0++0x1 line.word 0x0 "L0_AON_AFE_ATT,Offset value for RX AFE ATT iDAC" hexmask.word.byte 0x0 0.--7. 1. "AFE_ATT_IDAC_OFST,Offset value for AFE ATT iDAC" group.word 0x603C4++0x1 line.word 0x0 "L0_AON_AFE_CTLE,Offset value for RX AFE CTLE iDAC" hexmask.word.byte 0x0 0.--7. 1. "AFE_CTLE_IDAC_OFST,Offset value for AFE CTLE iDAC" group.word 0x603C8++0x1 line.word 0x0 "L0_AON_AFE_VGA1,Offset values for RX AFE VGA1 iDAC" hexmask.word.byte 0x0 0.--7. 1. "AFE_VGA1_IDAC_OFST,Offset value for AFE VGA1 iDAC" group.word 0x603CC++0x1 line.word 0x0 "L0_AON_DFE_PH_EVN_VDAC_OFST,Offset values for RX DFE Phase Even vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_PH_EVN_VDAC_OFST,Offset value for DFE Phase Even vDAC" group.word 0x603D0++0x1 line.word 0x0 "L0_AON_DFE_PH_ODD_VDAC_OFST,Offset values for RX DFE Phase Odd vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_PH_ODD_VDAC_OFST,Offset value for DFE Phase Odd vDAC" group.word 0x603D4++0x1 line.word 0x0 "L0_AON_DFE_PH_EVN_L,Offset values for RX DFE Phase Even Low vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_PH_EVN_L_VDAC_OFST,Offset value for DFE Phase Even Low vDAC" group.word 0x603D8++0x1 line.word 0x0 "L0_AON_DFE_PH_ODD_L,Offset values for RX DFE Phase Odd Low vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_PH_ODD_L_VDAC_OFST,Offset value for DFE Phase Odd Low vDAC" group.word 0x603DC++0x1 line.word 0x0 "L0_AON_RX_PHSADJ_LIN,RX Phase Adjust Linear Value" hexmask.word.byte 0x0 0.--5. 1. "RX_PHSADJ_LIN,Linear value for RX phase adjust" group.word 0x603E0++0x1 line.word 0x0 "L0_AON_DFE_DAT_EVN_H,Offset values for RX DFE Data Even High vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_EVN_H_VDAC_OFST,Offset value for DFE Data Even High vDAC" group.word 0x603E4++0x1 line.word 0x0 "L0_AON_DFE_DAT_EVN_L,Offset values for RX DFE Data Even Low vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_EVN_L_VDAC_OFST,Offset value for DFE Data Even Low vDAC" group.word 0x603E8++0x1 line.word 0x0 "L0_AON_DFE_DAT_ODD_H,Offset values for RX DFE Data Odd High vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_ODD_H_VDAC_OFST,Offset value for DFE Data Odd High vDAC" group.word 0x603EC++0x1 line.word 0x0 "L0_AON_DFE_DAT_ODD_L,Offset values for RX DFE Data Odd Low vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_DAT_ODD_L_VDAC_OFST,Offset value for DFE Data Odd Low vDAC" group.word 0x603F0++0x1 line.word 0x0 "L0_AON_DFE_BYP_EVN_VDAC_OFST,Offset values for RX DFE By-Pass Even vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_BYP_EVN_VDAC_OFST,Offset value for DFE By-Pass Even vDAC" group.word 0x603F4++0x1 line.word 0x0 "L0_AON_DFE_BYP_ODD_VDAC_OFST,Offset values for RX DFE By-Pass Odd vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_BYP_ODD_VDAC_OFST,Offset value for DFE By-Pass Odd vDAC" group.word 0x603F8++0x1 line.word 0x0 "L0_AON_DFE_ERR_EVN_VDAC_OFST,Offset values for RX DFE Error Even vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_ERR_EVN_VDAC_OFST,Offset value for DFE Error Even vDAC" group.word 0x603FC++0x1 line.word 0x0 "L0_AON_DFE_ERR_ODD_VDAC_OFST,Offset values for RX DFE Error Odd vDAC" hexmask.word.byte 0x0 0.--7. 1. "DFE_ERR_ODD_VDAC_OFST,Offset value for DFE Error Odd vDAC" group.word 0x60400++0x1 line.word 0x0 "L0_AON_RX_CAL_IQ,Value for RX Calibrated IQ Phase" hexmask.word.byte 0x0 0.--6. 1. "RX_CAL_IQ,Value for RX Calibrated IQ Phase" group.word 0x60404++0x1 line.word 0x0 "L0_AON_RX_SU_ALGO_CTL,Set to Skip Firmware startup algorithms" bitfld.word 0x0 14. "SKIP_RX_VGA_EXT_SU,Skip RX start-up VGA calibration in extended mode" "0,1" newline bitfld.word 0x0 13. "SKIP_RX_REF_CAL_EXT_SU,Skip RX start-up reference level calibration in extended mode" "0,1" newline bitfld.word 0x0 12. "SKIP_RX_DFE_ADPT_SU,Skip RX DFE DAC start-up adaptation" "0,1" newline bitfld.word 0x0 11. "SKIP_RX_DFE_CAL_SU,Skip RX DFE slicer start-up calibration" "0,1" newline bitfld.word 0x0 10. "SKIP_RX_DFE_CAL_EXT_SU,Skip RX DFE slicer extended start-up calibration" "0,1" newline bitfld.word 0x0 9. "SKIP_RX_AFE_ADPT_SU,Skip RX AFE DAC start-up adaptation" "0,1" newline bitfld.word 0x0 8. "SKIP_RX_AFE_CAL_SU,Skip RX AFE DAC start-up calibration" "0,1" newline bitfld.word 0x0 7. "SKIP_RX_PHS_CAL_SU,Skip RX phase slicer startup calibration" "0,1" newline bitfld.word 0x0 6. "SKIP_RX_PHS_CAL_EXT_SU,Skip RX extended phase slicer startup calibration" "0,1" newline bitfld.word 0x0 5. "SKIP_RX_FOM_SU,Skip RX start-up FOM measurement" "0,1" newline bitfld.word 0x0 4. "SKIP_RX_TX_INC_DEC_SU,Skip RX continuous phase calibration" "0,1" newline bitfld.word 0x0 3. "SKIP_RX_IQ_CAL_SU,Skip RX IQ start-up calibration" "0,1" newline bitfld.word 0x0 2. "SKIP_RX_IQ_DELTA_SU,Skip RX IQ fixed offset" "0,1" newline bitfld.word 0x0 1. "SKIP_RX_IQ_ADPT_SU,Skip RX IQ start-up adaptation" "0,1" newline bitfld.word 0x0 0. "SKIP_RX_REF_CAL_SU,Skip RX start-up reference level calibration" "0,1" group.word 0x60408++0x1 line.word 0x0 "L0_AON_RX_CONT_ALGO_CTL,Set to Skip Firmware mission-mode algorithms" bitfld.word 0x0 8. "SKIP_RX_CTLE_BST_CONT,Skip RX CTLE Boost continuous adaptation" "0,1" newline bitfld.word 0x0 7. "SKIP_RX_DFE_ADPT1_CONT,Skip RX DFE DAC continuous adaptation for tap1" "0,1" newline bitfld.word 0x0 6. "SKIP_RX_DFE_ADPT25_CONT,Skip RX DFE DAC continuous adaptation for tap2 - tap5" "0,1" newline bitfld.word 0x0 5. "SKIP_RX_DFE_CAL_CONT,Skip RX DFE slicer continuous calibration" "0,1" newline bitfld.word 0x0 4. "SKIP_RX_AFE_CAL_CONT,Skip RX AFE DAC continuous calibration" "0,1" newline bitfld.word 0x0 3. "SKIP_RX_PHS_CAL_CONT,Skip RX phase slicer offset calibration" "0,1" newline bitfld.word 0x0 2. "SKIP_RX_VGA_ADPT_CONT,Skip RX VGA continuous adaptation" "0,1" newline bitfld.word 0x0 1. "SKIP_RX_REFLVL_ADPT_CONT,Skip RX REF continuous adaptation" "0,1" newline bitfld.word 0x0 0. "SKIP_RX_FOM_CONT,Skip RX continuous FOM measurement" "0,1" group.word 0x6040C++0x1 line.word 0x0 "L0_AON_INIT_PU_DN,Initial Power-Up Done Status" bitfld.word 0x0 0. "INIT_PU_DN,Indicates whether initial power-up has completed or not." "0,1" group.word 0x60410++0x1 line.word 0x0 "L0_AON_RX_ADPT_ATT,RX Adapted value of ATT" hexmask.word.byte 0x0 0.--7. 1. "ATT_ADPT_VAL,Stored RX adapted ATT value." group.word 0x60414++0x1 line.word 0x0 "L0_AON_RX_ADPT_VGA,RX Adapted value of VGA" hexmask.word 0x0 0.--8. 1. "VGA_ADPT_VAL,Stored RX adapted VGA value." group.word 0x60418++0x1 line.word 0x0 "L0_AON_RX_ADPT_CTLE,RX Adapted value of CTLE" bitfld.word 0x0 10.--11. "CTLE_POLE_ADPT_VAL,Stored RX adapted CTLE pole value" "0,1,2,3" newline hexmask.word 0x0 0.--9. 1. "CTLE_BST_ADPT_VAL,Stored RX adapted CTLE boost value." group.word 0x6041C++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP1,RX Adapted value of DFE TAP1" hexmask.word 0x0 0.--12. 1. "DFE_TAP1_ADPT_VAL,Stored RX adapted DFE TAP1 value." group.word 0x60420++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP2,RX Adapted value of DFE TAP2" hexmask.word 0x0 0.--11. 1. "DFE_TAP2_ADPT_VAL,Stored RX adapted DFE TAP2 value." group.word 0x60424++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP3,RX Adapted value of DFE TAP3" hexmask.word 0x0 0.--11. 1. "DFE_TAP3_ADPT_VAL,Stored RX adapted DFE TAP3 value." group.word 0x60428++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP4,RX Adapted value of DFE TAP4" hexmask.word 0x0 0.--11. 1. "DFE_TAP4_ADPT_VAL,Stored RX adapted DFE TAP4 value." group.word 0x6042C++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP5,RX Adapted value of DFE TAP5" hexmask.word 0x0 0.--11. 1. "DFE_TAP5_ADPT_VAL,Stored RX adapted DFE TAP5 value." group.word 0x60430++0x1 line.word 0x0 "L0_AON_RX_ADPT_IQ,RX Adapted value of IQ for bank 0" hexmask.word.byte 0x0 0.--6. 1. "RX_ADPT_IQ,RX adapted value of IQ for bank 0" group.word 0x60434++0x1 line.word 0x0 "L0_AON_RX_ADPT_REF_ERR,RX Adapted value of Reference Level for Error Slicer for bank 0" hexmask.word.byte 0x0 8.--15. 1. "RX_ADPT_REF_ERR_ODD,RX Adapted value of reference level for error odd slicer for bank 0" newline hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_REF_ERR_EVN,RX Adapted value of reference level for error even slicer for bank 0" group.word 0x60438++0x1 line.word 0x0 "L0_AON_RX_ADPT_DN,RX Adaptation Done Status" bitfld.word 0x0 1. "RX_ADPT_IQ_VLD,Indicates if the RX adapted value of IQ for bank 0 is valid" "0,1" newline bitfld.word 0x0 0. "RX_ADPT_DN,Indicates whether RX adaptation has completed or not." "0,1" group.word 0x6043C++0x1 line.word 0x0 "L0_AON_RX_ADPT_ATT_B1,RX Adapted value of ATT for bank 1" hexmask.word.byte 0x0 0.--7. 1. "ATT_ADPT_VAL,Stored RX adapted ATT value." group.word 0x60440++0x1 line.word 0x0 "L0_AON_RX_ADPT_VGA_B1,RX Adapted value of VGA for bank 1" hexmask.word 0x0 0.--8. 1. "VGA_ADPT_VAL,Stored RX adapted VGA value." group.word 0x60444++0x1 line.word 0x0 "L0_AON_RX_ADPT_CTLE_B1,RX Adapted value of CTLE for bank 1" bitfld.word 0x0 10.--11. "CTLE_POLE_ADPT_VAL,Stored RX adapted CTLE pole value" "0,1,2,3" newline hexmask.word 0x0 0.--9. 1. "CTLE_BST_ADPT_VAL,Stored RX adapted CTLE boost value." group.word 0x60448++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP1_B1,RX Adapted value of DFE TAP1 for bank 1" hexmask.word 0x0 0.--12. 1. "DFE_TAP1_ADPT_VAL,Stored RX adapted DFE TAP1 value." group.word 0x6044C++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP2_B1,RX Adapted value of DFE TAP2 for bank 1" hexmask.word 0x0 0.--11. 1. "DFE_TAP2_ADPT_VAL,Stored RX adapted DFE TAP2 value." group.word 0x60450++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP3_B1,RX Adapted value of DFE TAP3 for bank 1" hexmask.word 0x0 0.--11. 1. "DFE_TAP3_ADPT_VAL,Stored RX adapted DFE TAP3 value." group.word 0x60454++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP4_B1,RX Adapted value of DFE TAP4 for bank 1" hexmask.word 0x0 0.--11. 1. "DFE_TAP4_ADPT_VAL,Stored RX adapted DFE TAP4 value." group.word 0x60458++0x1 line.word 0x0 "L0_AON_RX_ADPT_DFE_TAP5_B1,RX Adapted value of DFE TAP5 for bank 1" hexmask.word 0x0 0.--11. 1. "DFE_TAP5_ADPT_VAL,Stored RX adapted DFE TAP5 value." group.word 0x6045C++0x1 line.word 0x0 "L0_AON_RX_ADPT_IQ_B1,RX Adapted value of IQ for bank 1" hexmask.word.byte 0x0 0.--6. 1. "RX_ADPT_IQ_B1,RX adapted value of IQ for bank 1" group.word 0x60460++0x1 line.word 0x0 "L0_AON_RX_ADPT_REF_ERR_B1,RX Adapted value of Reference Level for Error Slicer for bank 1" hexmask.word.byte 0x0 8.--15. 1. "RX_ADPT_REF_ERR_ODD_B1,RX Adapted value of reference level for error odd slicer for bank 1" newline hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_REF_ERR_EVN_B1,RX Adapted value of reference level for error even slicer for bank 1" group.word 0x60464++0x1 line.word 0x0 "L0_AON_RX_ADPT_DN_B1,RX Adaptation Done Status for bank 1" bitfld.word 0x0 1. "RX_ADPT_IQ_VLD_B1,Indicates if the RX adapted value of IQ for bank 1 is valid" "0,1" newline bitfld.word 0x0 0. "RX_ADPT_DN_B1,Indicates whether Bank 1 RX adaptation has completed or not." "0,1" group.word 0x60468++0x1 line.word 0x0 "L0_AON_FST_FLAGS,Fast flags for simulation only" bitfld.word 0x0 9. "FST_RX_VCO_CAL,Enable fast RX VCO Calibration" "0,1" newline bitfld.word 0x0 8. "FST_RX_VCO_WAIT,Enable fast RX VCO wait times" "0,1" newline bitfld.word 0x0 7. "FST_RX_PU,Enable fast RX power-up (LOS VREG/AFE and DCC)" "0,1" newline bitfld.word 0x0 6. "FST_TX_RXDET,Enable fast TX Detect RX" "0,1" newline bitfld.word 0x0 5. "FST_TX_CMN_MODE,Enable fast TX Common Mode Charge-up" "0,1" newline bitfld.word 0x0 4. "FST_SUP,Enable fast Support block (MPLL and Rtune)" "0,1" newline bitfld.word 0x0 3. "FST_RX_CONT_CAL_ADPT,Enables fast RX continuous calibration/adaptation" "0,1" newline bitfld.word 0x0 2. "FST_RX_CONT_ADPT,Enables fast RX continuous adaptation" "0,1" newline bitfld.word 0x0 1. "FST_RX_ADPT,Enables fast RX adaptation" "0,1" newline bitfld.word 0x0 0. "FST_RX_SU_CAL,Enables fast RX start-up calibration" "0,1" group.word 0x6046C++0x1 line.word 0x0 "L0_AON_FW_STATES_0,Stores various states for Firmware - State #1" hexmask.word 0x0 0.--15. 1. "SPARE_STATE_0,Spare fields to be used by Firmware" group.word 0x60470++0x1 line.word 0x0 "L0_AON_TXRX_OVRD_IN,Override values for incoming AON TX/RX controls from PCS" bitfld.word 0x0 3. "TX_DIS_OVRD_EN,Override enable for tx_disable" "0,1" newline bitfld.word 0x0 2. "TX_DIS_OVRD_VAL,Override value for tx_disable" "0,1" newline bitfld.word 0x0 1. "RX_DIS_OVRD_EN,Override enable for rx_disable" "0,1" newline bitfld.word 0x0 0. "RX_DIS_OVRD_VAL,Override value for rx_disable" "0,1" group.word 0x60474++0x1 line.word 0x0 "L0_AON_TX_EQ_DIR_POLARITY_CTL,Controls the equalization direction polarity setting in PCS RAW" bitfld.word 0x0 2. "TXPOST_DIR_INV,Invert the txpost_dir polarity" "0,1" newline bitfld.word 0x0 1. "TXPRE_DIR_INV,Invert the txpre_dir polarity" "0,1" newline bitfld.word 0x0 0. "TXMAIN_DIR_INV,Invert teh txmain_dir polarity" "0,1" group.word 0x60478++0x1 line.word 0x0 "L0_AON_TX_PRE_DIV,TX pre threshold div" hexmask.word.byte 0x0 5.--8. 1. "TX_PRE_THR_DIV,TX pre threshold div" newline hexmask.word.byte 0x0 0.--4. 1. "TX_PRE_OFF_MULT,TX pre offset mult" group.word 0x6047C++0x1 line.word 0x0 "L0_AON_TX_MAIN_ATT_THR,TX main ATT high and low threshold" bitfld.word 0x0 3.--5. "TX_MAIN_ATT_H_THR,TX main ATT high threshold" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0.--2. "TX_MAIN_ATT_L_THR,TX main ATT low threshold" "0,1,2,3,4,5,6,7" group.word 0x60480++0x1 line.word 0x0 "L0_AON_TX_MAIN_VGA_THR,TX main vga high and low threshold" hexmask.word.byte 0x0 4.--7. 1. "TX_MAIN_VGA_H_THR,TX main vga high threshold" newline hexmask.word.byte 0x0 0.--3. 1. "TX_MAIN_VGA_L_THR,TX main vga low threshold" group.word 0x60484++0x1 line.word 0x0 "L0_AON_TX_POST_BST_THR,TX post boost high and low threshold" hexmask.word.byte 0x0 5.--9. 1. "TX_POST_BST_H_THR,TX post boost high threshold" newline hexmask.word.byte 0x0 0.--4. 1. "TX_POST_BST_L_THR,TX post boost low threshold" group.word 0x60488++0x1 line.word 0x0 "L0_AON_TX_POST_TAP1_THR,TX post tap1 high and low threshold" hexmask.word.byte 0x0 8.--15. 1. "TX_POST_TAP1_H_THR,TX post tap1 high threshold" newline hexmask.word.byte 0x0 0.--7. 1. "TX_POST_TAP1_L_THR,TX post tap1 low threshold" group.word 0x6048C++0x1 line.word 0x0 "L0_AON_RX_CAL_REF_EE,Value for reference level error even slicer" hexmask.word.byte 0x0 0.--7. 1. "RX_CAL_REF_EE_VDAC_OFST,Value for reference level error even slicer" group.word 0x60490++0x1 line.word 0x0 "L0_AON_RX_CAL_REF_EO,Value for reference level error odd slicer" hexmask.word.byte 0x0 0.--7. 1. "RX_CAL_REF_EO_VDAC_OFST,Value for reference level error odd slicer" group.word 0x60494++0x1 line.word 0x0 "L0_AON_DFE_EE,Value for DFE Error Even Low and High Slicer in Mission Mode" hexmask.word.byte 0x0 8.--15. 1. "DFE_EEL_VDAC_OFST,Value for DFE error even low slicer in mission mode" newline hexmask.word.byte 0x0 0.--7. 1. "DFE_EEH_VDAC_OFST,Value for DFE error even high slicer in mission mode" group.word 0x60498++0x1 line.word 0x0 "L0_AON_DFE_EO,Value for DFE Error Odd Low and High Slicer in Mission Mode" hexmask.word.byte 0x0 8.--15. 1. "DFE_EOL_VDAC_OFST,Value for DFE error odd low slicer in mission mode" newline hexmask.word.byte 0x0 0.--7. 1. "DFE_EOH_VDAC_OFST,Value for DFE error odd high slicer in mission mode" group.word 0x6049C++0x1 line.word 0x0 "L0_AON_RX_ADPT_ERR_SLC_MODE,RX Adaptation Error Slicer Mode for Reference-Level Calibration" bitfld.word 0x0 0.--1. "RX_ADPT_ERR_SLC_MODE,RX Adaptation error slicer mode for reference-level calibration" "0,1,2,3" group.word 0x604A0++0x1 line.word 0x0 "L0_AON_SETUP_REF_CTLE,Offset value for AFE CTLE IDAC During Reference-Level Calibration" hexmask.word.byte 0x0 0.--7. 1. "SETUP_REF_CTLE_IDAC_OFST,Offset value for AFE CTLE iDAC during reference-level Calibration" group.word 0x604A4++0x1 line.word 0x0 "L0_AON_SETUP_REF_VGA1,Offset value for AFE VGA1 IDAC During Reference-Level Calibration" hexmask.word.byte 0x0 0.--7. 1. "SETUP_REF_VGA1_IDAC_OFST,Offset value for AFE CTLE VGA1 during reference-level Calibration" group.word 0x604A8++0x1 line.word 0x0 "L0_AON_SETUP_SLC_VGA1,Offset Value for AFE VGA1 for Slicer Setup Calibration" hexmask.word.byte 0x0 0.--7. 1. "SETUP_SLC_VGA1_IDAC_OFST,Offset value for AFE VGA1 for slicer setup calibration" group.word 0x604AC++0x1 line.word 0x0 "L0_AON_RX_CDR_DET_CTL,RX CDR Detector Control" bitfld.word 0x0 2. "DIS_IN_ADPT,Disable the CDR Detector state machine for during adaptation" "0,1" newline bitfld.word 0x0 1. "RX_CDR_PPM_MON_MODE,Enable the CDR Detector in Monitor Mode." "0,1" newline bitfld.word 0x0 0. "RX_CDR_DETECTOR_EN,Enable the CDR Detector in Detector Mode." "0,1" group.word 0x604B0++0x1 line.word 0x0 "L0_AON_RX_CDR_RECOV_T,RX CDR Recovery Time in reference clock for the intended PPM" hexmask.word 0x0 0.--11. 1. "RX_CDR_RECOV_T,RX CDR Recovery Time in reference clock for intended PPM this default CDR Recovery Time is determined based on 15000 ppm drift on serial data." group.word 0x604B4++0x1 line.word 0x0 "L0_AON_MEM_BREAKPOINT_2,FSM Breakpoint 2 on SRAM Address for Debugging" bitfld.word 0x0 14. "BREAKPOINT_EN,Enables the Breakpoint 2 Clearing this bit will automatically resume the FSM if it is stopped at MEM_BREAKPOINT_2." "0,1" newline hexmask.word 0x0 0.--13. 1. "BREAKPOINT_ADDR,Memory Address for Breakpoint 2" group.word 0x604B8++0x1 line.word 0x0 "L0_AON_ADPT_CTL_0,Adaptation Control register #0" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x604BC++0x1 line.word 0x0 "L0_AON_ADPT_CTL_1,Adaptation Control register #1" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x604C0++0x1 line.word 0x0 "L0_CTL_RESET_RTN_REQ,Reset routine request" bitfld.word 0x0 0. "RESET_RTN_REQ,Reset routine request" "0,1" rgroup.word 0x604C4++0x1 line.word 0x0 "L0_CTL_RX_RESET_IRQ,RX reset interrupt" bitfld.word 0x0 0. "RX_RESET,RX reset interrupt" "0,1" rgroup.word 0x604C8++0x1 line.word 0x0 "L0_CTL_RX_REQ_IRQ,RX request interrupt" bitfld.word 0x0 0. "RX_REQ,RX request interrupt" "0,1" rgroup.word 0x604CC++0x1 line.word 0x0 "L0_CTL_RX_RATE_IRQ,RX rate change interrupt request" bitfld.word 0x0 0. "RX_RATE_IRQ,RX rate change interrupt request" "0,1" rgroup.word 0x604D0++0x1 line.word 0x0 "L0_CTL_RX_PSTATE_IRQ,RX pstate change interrupt request" bitfld.word 0x0 0. "RX_PSTATE_IRQ,RX pstate change interrupt request" "0,1" rgroup.word 0x604D4++0x1 line.word 0x0 "L0_CTL_RX_ADPT_REQ_IRQ,RX adaptation request interrupt" bitfld.word 0x0 0. "RX_ADPT_REQ_IRQ,RX adaptation request interrupt" "0,1" rgroup.word 0x604D8++0x1 line.word 0x0 "L0_CTL_RX_ADPT_DIS_IRQ,RX adaptation disable interrupt" bitfld.word 0x0 0. "RX_ADPT_DIS_IRQ,RX adaptation disable interrupt" "0,1" group.word 0x604DC++0x1 line.word 0x0 "L0_CTL_RX_RESET_IRQ_CLR,RX reset interrupt clear" bitfld.word 0x0 0. "RX_RESET_IRQ_CLR,RX reset interrupt clear (self-clearing)" "0,1" group.word 0x604E0++0x1 line.word 0x0 "L0_CTL_RX_REQ_IRQ_CLR,RX request interrupt clear" bitfld.word 0x0 0. "RX_REQ_IRQ_CLR,RX request interrupt clear (self-clearing)" "0,1" group.word 0x604E4++0x1 line.word 0x0 "L0_CTL_RX_RATE_IRQ_CLR,RX rate change interrupt clear" bitfld.word 0x0 0. "RX_RATE_IRQ_CLR,RX rate change interrupt clear (self-clearing)" "0,1" group.word 0x604E8++0x1 line.word 0x0 "L0_CTL_RX_PSTATE_IRQ_CLR,RX pstate change interrupt clear" bitfld.word 0x0 0. "RX_PSTATE_IRQ_CLR,RX pstate change interrupt clear (self-clearing)" "0,1" group.word 0x604EC++0x1 line.word 0x0 "L0_CTL_RX_ADPT_REQ_IRQ_CLR,RX adaptation request interrupt clear" bitfld.word 0x0 0. "RX_ADPT_REQ_IRQ_CLR,RX adaptation request interrupt clear (self-clearing)" "0,1" group.word 0x604F0++0x1 line.word 0x0 "L0_CTL_RX_ADPT_DIS_IRQ_CLR,RX adaptation disable interrupt clear" bitfld.word 0x0 0. "RX_ADPT_DIS_IRQ_CLR,RX adaptation disable interrupt clear (self-clearing)" "0,1" group.word 0x604F4++0x1 line.word 0x0 "L0_CTL_IRQ_MASK,Interrupt Mask" bitfld.word 0x0 7. "RX_IQ_IRQ_MSK,Mask for RX IQ interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 6. "MPLL_RECAL_IRQ_MSK,Mask for MPLL re-calibration interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 5. "RX_RESET_IRQ_MSK,Mask for RX reset interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 4. "RX_ADPT_DIS_IRQ_MSK,Mask for RX adaptation disable interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 3. "RX_ADPT_REQ_IRQ_MSK,Mask for RX adaptation request interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 2. "RX_PSTATE_IRQ_MSK,Mask for RX pstate change interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 1. "RX_RATE_IRQ_MSK,Mask for RX rate change interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" newline bitfld.word 0x0 0. "RX_REQ_IRQ_MSK,Mask for RX request interrupt (0 = cannot interrupt)" "0: cannot interrupt),?" rgroup.word 0x604F8++0x1 line.word 0x0 "L0_CTL_MPLL_RECAL_IRQ,MPLLA/B Re-calibration interrupt" bitfld.word 0x0 0. "MPLL_RECAL_IRQ,MPLLA/B Re-calibration interrupt" "0,1" group.word 0x604FC++0x1 line.word 0x0 "L0_CTL_MPLL_RECAL_IRQ_CLR,MPLL Re-calibration interrupt clear" bitfld.word 0x0 0. "MPLL_RECAL_IRQ_CLR,MPLL Re-Calibration interrupt clear (self-clearing)" "0,1" rgroup.word 0x60500++0x1 line.word 0x0 "L0_CTL_RX_IQ_IRQ,RX IQ interrupt" bitfld.word 0x0 0. "RX_IQ_IRQ,RX IQ interrupt" "0,1" group.word 0x60504++0x1 line.word 0x0 "L0_CTL_RX_IQ_IRQ_CLR,RX IQ interrupt clear" bitfld.word 0x0 0. "RX_IQ_IRQ_CLR,RX IQ interrupt clear (self-clearing)" "0,1" group.word 0x60508++0x1 line.word 0x0 "L0_DIG_PMA_XF_L_OVRD_IN,Override values for incoming LANE controls" bitfld.word 0x0 2. "LANE_OVRD_EN,Override enable for signals in this register Input Sigals overridden by it:" "0,1" newline bitfld.word 0x0 1. "LANE_MPLLB_EN_IN,Override value for lane_mpllb_en_in." "0,1" newline bitfld.word 0x0 0. "LANE_MPLLA_EN_IN,Override value for lane_mplla_en_in." "0,1" group.word 0x6050C++0x1 line.word 0x0 "L0_DIG_PMA_XF_L_OVRD_OUT,Override values for outgoing LANE controls" bitfld.word 0x0 2. "LANE_OVRD_EN,Override enable for signals in this register Output Signals overridden by it:" "0,1" newline bitfld.word 0x0 1. "LANE_MPLLB_EN_OUT,Override value for lane_mpllb_en_out." "0,1" newline bitfld.word 0x0 0. "LANE_MPLLA_EN_OUT,Override value for lane_mplla_en_out." "0,1" group.word 0x60510++0x1 line.word 0x0 "L0_DIG_PMA_XF_SUP_OVRD_IN,Override values for incoming SUP controls from PMA" bitfld.word 0x0 2. "SUP_STATE_OVRD_EN,Override enable for signals in this register Input Signals overridden by it:" "0,1" newline bitfld.word 0x0 1. "MPLLB_STATE,Override value for mpllb_state." "0,1" newline bitfld.word 0x0 0. "MPLLA_STATE,Override value for mplla_state." "0,1" rgroup.word 0x60514++0x1 line.word 0x0 "L0_DIG_PMA_XF_SUP_PMA_IN,Current values for coming SUP status controls from PMA" bitfld.word 0x0 2. "RTN_ACK,Value from PMA for rtune_ack" "0,1" newline bitfld.word 0x0 1. "MPLLB_STATE,Value from PMA for mpllb_state" "0,1" newline bitfld.word 0x0 0. "MPLLA_STATE,Value from PMA for mplla_state" "0,1" group.word 0x60518++0x1 line.word 0x0 "L0_DIG_PMA_XF_TX_OVRD_OUT,Override values for outgoing TX controls to PMA" bitfld.word 0x0 3. "TX_RESET_OVRD_EN,Override enable for tx_reset Output Signals to PMA overridden by it: tx_reset" "0,1" newline bitfld.word 0x0 2. "TX_RESET_OVRD_VAL,Override value for tx_reset." "0,1" newline bitfld.word 0x0 1. "TX_REQ_OVRD_EN,Override enable for tx_req Output Signals to PMA overridden by it: tx_req" "0,1" newline bitfld.word 0x0 0. "TX_REQ_OVRD_VAL,Override value for tx_req." "0,1" rgroup.word 0x6051C++0x1 line.word 0x0 "L0_DIG_PMA_XF_TX_PMA_IN,Current values for coming TX status controls from PMA" bitfld.word 0x0 0. "ACK,Value from PMA for tx_ack" "0,1" group.word 0x60520++0x1 line.word 0x0 "L0_DIG_PMA_XF_RX_OVRD_OUT,Override values for outgoing RX controls to PMA" bitfld.word 0x0 3. "RX_RESET_OVRD_EN,Override enable for rx_reset Output Signals to PMA overridden by it: rx_reset" "0,1" newline bitfld.word 0x0 2. "RX_RESET_OVRD_VAL,Override value for rx_reset." "0,1" newline bitfld.word 0x0 1. "RX_REQ_OVRD_EN,Override enable for rx_req Output Signals to PMA overridden by it: rx_req" "0,1" newline bitfld.word 0x0 0. "RX_REQ_OVRD_VAL,Override value for rx_req." "0,1" rgroup.word 0x60524++0x1 line.word 0x0 "L0_DIG_PMA_XF_RX_PMA_IN,Current values for coming RX status controls from PMA" bitfld.word 0x0 0. "ACK,Value from PMA for rx_ack" "0,1" group.word 0x60528++0x1 line.word 0x0 "L0_DIG_PMA_XF_L_RTN_CTL,Lane Rtune Controls" bitfld.word 0x0 0. "LANE_RTN_REQ,Lane value for rtune_req" "0,1" group.word 0x6052C++0x1 line.word 0x0 "L0_DIG_PMA_XF_RX_OVRD_IN,Override values for incoming RX controls from PMA" bitfld.word 0x0 1. "RX_ACK_OVRD_EN,Override enable for rx_ack Input signal from PMA overridden by it: rx_ac" "0,1" newline bitfld.word 0x0 0. "RX_ACK_OVRD_VAL,Override value for rx_ack Its override enable is: RX_OVRD_IN." "0,1" rgroup.word 0x60530++0x1 line.word 0x0 "L0_DIG_PMA_XF_SRAM_REC_EN,SRAM Record Enable" bitfld.word 0x0 0. "REC_EN,Enable the SRAM Recording" "0,1" group.word 0x60534++0x1 line.word 0x0 "L0_TX_FSM_CTL,TX FSM Control" bitfld.word 0x0 3. "TX_P0_ALL_RXDET,If asserted then rxdet request is allowed in P0" "0,1" newline bitfld.word 0x0 2. "TX_P0S_ALL_RXDET,If asserted then rxdet request is allowed in P0S" "0,1" newline bitfld.word 0x0 1. "TX_P1_ALL_RXDET,If asserted then rxdet request is allowed in P1" "0,1" newline bitfld.word 0x0 0. "TX_P2_ALL_RXDET,If asserted then rxdet request is allowed in P2" "0,1" group.word 0x60538++0x1 line.word 0x0 "L0_TX_CLK_CTL,Select clock to act as TX input clock" hexmask.word.byte 0x0 1.--4. 1. "TX_CLK_SEL,Select clock source for tx_pma_clk" newline bitfld.word 0x0 0. "TX_CLK_EN,Enable the tx_clk to pma tx lane TX_CLK_EN must be de-asserted when switching TX_CLK_SEL" "0,1" group.word 0x6053C++0x1 line.word 0x0 "L0_RX_FSM_CTL,RX FSM control register" bitfld.word 0x0 1. "RATE_CHG_IN_P1,Rate change in P0/P0s" "0,1" newline bitfld.word 0x0 0. "EN_RX_CTL_FSM,EN_RX_CTL_FSM" "0,1" group.word 0x60540++0x1 line.word 0x0 "L0_RX_LOS_MASK_CTL,RX LOS Mask Control" hexmask.word 0x0 0.--8. 1. "RX_LOS_MASK_CNT,Number of cycles (ref_range_clk) to mask out the rx_los output from the time the los is powered-on." group.word 0x60544++0x1 line.word 0x0 "L0_RX_DAT_EN_OVRD_CTL,RX Data Enable Override Control" hexmask.word 0x0 5.--15. 1. "INT_REF_TRCK_CNT,Number of ref_range cycles to wait for integral reference tracking to settle." newline hexmask.word.byte 0x0 0.--4. 1. "RX_DAT_EN_OVRD_CNT,Number of ref_range cycles to override rx_data_en to 1." rgroup.word 0x60548++0x1 line.word 0x0 "L0_OFFCAN_CONT_STATUS,RX continuous offset cancellation status" bitfld.word 0x0 0. "ENABLE,Enable status for rx continuous offset cancellation" "0,1" rgroup.word 0x6054C++0x1 line.word 0x0 "L0_ADPT_CONT_STATUS,RX continuous adaptation status" bitfld.word 0x0 0. "ENABLE,Enable status for rx continuous adaptation" "0,1" rgroup.word 0x60550++0x1 line.word 0x0 "L0_RX_ADPT_MODE,RX adaptation mode" bitfld.word 0x0 0.--1. "ADPT_MODE,RX adaptation mode" "0,1,2,3" rgroup.word 0x60554++0x1 line.word 0x0 "L0_RX_ADPT_SEL,Select Between Two Banks Adaptation Settings for RX Adaptation" bitfld.word 0x0 0. "RX_ADPT_SEL,Select Between Two Banks Adaptation Settings for RX Adaptation" "0,1" rgroup.word 0x60558++0x1 line.word 0x0 "L0_RX_PPM_DRIFT,RX CDR PPM Drift on rx clock" bitfld.word 0x0 14. "RX_PPM_DRIFT_VLD,Indicates if the PPM Drift is valid." "0,1" newline hexmask.word 0x0 0.--13. 1. "RX_PPM_DRIFT,Indicates the amount of drift on rx clock when RX_PPM_DRIFT_VLD is asserted" rgroup.word 0x6055C++0x1 line.word 0x0 "L0_RX_CDR_DET_STATUS,RX CDR Detector Status Register" bitfld.word 0x0 0.--2. "CDR_DET_STATE,Indicate the current state for the state machine in CDR Detector" "0,1,2,3,4,5,6,7" group.word 0x60560++0x1 line.word 0x0 "L0_RX_PMA_MISC_CTL,Values for outgoing RX controls to PMA" bitfld.word 0x0 3. "RX_DFE_TAP1_ADPT_OVRD_EN,Enable override the DFE Tap1 to zero during RX Adaptation" "0,1" newline bitfld.word 0x0 2. "RX_CDR_TRACK_EN,Value for rx_cdr_track_en to PMA" "0,1" newline bitfld.word 0x0 1. "RX_ALIGH_EN,Value for rx_align_en to PMA" "0,1" newline bitfld.word 0x0 0. "RX_CLK_SHIFT,Value for rx_clk_shift to PMA" "0,1" rgroup.word 0x60564++0x1 line.word 0x0 "L0_RX_PMA_EQ_IQ,RX PMA Equalization IQ Phase value" hexmask.word.byte 0x0 0.--5. 1. "RX_PMA_EQ_IQ,RX PMA equalization IQ phase value" group.word 0x60568++0x1 line.word 0x0 "L0_RX_ADPT_MODE_OVRD_EN,Enable RX Adapt Mode Override (using Custom Setting for RX Adaptation)" bitfld.word 0x0 3. "RX_ADPT_MODE_3_OVRD_EN,Enables RX adapt mode override when adapt_mode is 2'b11" "0,1" newline bitfld.word 0x0 2. "RX_ADPT_MODE_2_OVRD_EN,Enables RX adapt mode override when adapt_mode is 2'b10" "0,1" newline bitfld.word 0x0 1. "RX_ADPT_MODE_1_OVRD_EN,Enables RX adapt mode override when adapt_mode is 2'b01" "0,1" newline bitfld.word 0x0 0. "RX_ADPT_MODE_0_OVRD_EN,Enables RX adapt mode override when adapt_mode is 2'b00" "0,1" rgroup.word 0x6056C++0x1 line.word 0x0 "L0_RX_ADPT_MODE_EN,Enable Using Four Different RX Adaptation Modes" bitfld.word 0x0 0. "RX_ADPT_MODE_EN,Enable using four different RX adaptation modes" "0,1" group.word 0x60570++0x1 line.word 0x0 "L0_RX_ADPT_MM_FOM,RX Adaptation Mission-Mode Figure of Merit" hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_MM_FOM,RX Adaptation Mission-Mode Figure of Merit" group.word 0x60574++0x1 line.word 0x0 "L0_RX_ADPT_SU_FOM,RX Adaptation Start-up Figure of Merit (Base Mode or Extended Mode)" hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_SU_FOM,RX Adaptation Start-up Figure of Merit (Base Mode or Extended Mode)" group.word 0x60578++0x1 line.word 0x0 "L0_RX_ADPT_REF_ERR_EVN,RX Adapted value of Reference Level for Error Even Slicer" hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_REF_ERR_EVN,RX Adapted value of reference level for error even slicer for bank 0" group.word 0x6057C++0x1 line.word 0x0 "L0_RX_ADPT_REF_ERR_ODD,RX Adapted value of Reference Level for Error Odd Slicer" hexmask.word.byte 0x0 0.--7. 1. "RX_ADPT_REF_ERR_ODD,RX Adapted value of reference level for error odd slicer" rgroup.word 0x60580++0x1 line.word 0x0 "L0_RX_PHSADJ_MAP,RX Phase Adjust Mapped Value" hexmask.word.byte 0x0 0.--5. 1. "RX_PHSADJ_MAP,Mapped value for RX phase adjust" group.word 0x60584++0x1 line.word 0x0 "L0_RX_DAC_IN_USE,Indicates state of the DAC Interface" bitfld.word 0x0 0. "DAC_IN_USE,Indicates state of the DAC interface This is used by firmware only" "0,1" group.word 0x60588++0x1 line.word 0x0 "L0_AON_ADPT_CTL_2,Adaptation Control register #2" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x6058C++0x1 line.word 0x0 "L0_AON_ADPT_CTL_3,Adaptation Control register #3" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x60590++0x1 line.word 0x0 "L0_AON_ADPT_CTL_4,Adaptation Control register #4" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x60594++0x1 line.word 0x0 "L0_AON_ADPT_CTL_5,Adaptation Control register #5" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x60598++0x1 line.word 0x0 "L0_AON_ADPT_CTL_6,Adaptation Control register #6" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x6059C++0x1 line.word 0x0 "L0_AON_ADPT_CTL_7,Adaptation Control register #7" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605A0++0x1 line.word 0x0 "L0_AON_ADPT_CTL_8,Adaptation Control register #8" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605A4++0x1 line.word 0x0 "L0_AON_ADPT_CTL_9,Adaptation Control register #9" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605A8++0x1 line.word 0x0 "L0_AON_ADPT_CTL_10,Adaptation Control register #10" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605AC++0x1 line.word 0x0 "L0_AON_ADPT_CTL_11,Adaptation Control register #11" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605B0++0x1 line.word 0x0 "L0_AON_ADPT_CTL_12,Adaptation Control register #12" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605B4++0x1 line.word 0x0 "L0_AON_ADPT_CTL_13,Adaptation Control register #13" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605B8++0x1 line.word 0x0 "L0_AON_ADPT_CTL_14,Adaptation Control register #14" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605BC++0x1 line.word 0x0 "L0_AON_ADPT_CTL_15,Adaptation Control register #15" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605C0++0x1 line.word 0x0 "L0_AON_ADPT_CTL_16,Adaptation Control register #16" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605C4++0x1 line.word 0x0 "L0_AON_ADPT_CTL_17,Adaptation Control register #17" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605C8++0x1 line.word 0x0 "L0_AON_ADPT_CTL_18,Adaptation Control register #18" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605CC++0x1 line.word 0x0 "L0_AON_ADPT_CTL_19,Adaptation Control register #19" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605D0++0x1 line.word 0x0 "L0_AON_ADPT_CTL_20,Adaptation Control register #20" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605D4++0x1 line.word 0x0 "L0_AON_ADPT_CTL_21,Adaptation Control register #21" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605D8++0x1 line.word 0x0 "L0_AON_ADPT_CTL_22,Adaptation Control register #22" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605DC++0x1 line.word 0x0 "L0_AON_ADPT_CTL_23,Adaptation Control register #23" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605E0++0x1 line.word 0x0 "L0_AON_ADPT_CTL_24,Adaptation Control register #24" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605E4++0x1 line.word 0x0 "L0_AON_ADPT_CTL_25,Adaptation Control register #25" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605E8++0x1 line.word 0x0 "L0_AON_ADPT_CTL_26,Adaptation Control register #26" hexmask.word 0x0 0.--15. 1. "VAL,Value of adaptation control" group.word 0x605EC++0x1 line.word 0x0 "L0_AON_SRAM_REC_CTRL,SRAM Record Control" bitfld.word 0x0 2. "REC_EN,Enable the SRAM Recording" "0,1" newline bitfld.word 0x0 1. "REC_MODE,The SRAM Recording Mode This field is programmed as follows:" "0,1" newline bitfld.word 0x0 0. "REC_INIT_DN,Indicates if the SRAM_REC_ADDR and SRAM_REC_ITER have been initialized." "0,1" group.word 0x605F0++0x1 line.word 0x0 "L0_AON_SRAM_REC_ADDR,Current SRAM Recording Address" hexmask.word 0x0 0.--15. 1. "SRAM_REC_ADDR,Current SRAM Recording Address" group.word 0x605F4++0x1 line.word 0x0 "L0_AON_SRAM_REC_ITER,Current Iteration Count for SRAM Recording" hexmask.word 0x0 0.--9. 1. "SRAM_REC_ITER,Current Iteration Count for SRAM Recording" group.word 0x605F8++0x1 line.word 0x0 "L0_AON_RX_SU_ALGO_CTL_1,Set to Skip Firmware startup/rate-change algorithms" bitfld.word 0x0 2. "SKIP_RX_VGA_SLICER_CAL_SU,Skip RX VGA slicer start-up calibration" "0,1" newline bitfld.word 0x0 1. "SKIP_RX_BYP_CAL_SU,Skip RX bypass slicer start-up calibration" "0,1" newline bitfld.word 0x0 0. "SKIP_RX_ERR_CAL_SU,Skip RX error slicer start-up calibration" "0,1" group.word 0x605FC++0x1 line.word 0x0 "L0_AON_RX_IQ_CTL,RX IQ Adaptation Control Register #1" bitfld.word 0x0 4.--6. "IQ_ADPT_RESERVED,reserved" "0,1,2,3,4,5,6,7" newline hexmask.word.byte 0x0 0.--3. 1. "IQ_ADPT_OFST,Initial IQ offset for IQ adaptation." group.word 0x60600++0x1 line.word 0x0 "L0_AON_RX_IQ_CTL_1,RX IQ Adaptation Control Register #2" hexmask.word 0x0 1.--15. 1. "DPLL_THR,DPLL frequency threshold" newline bitfld.word 0x0 0. "DPLL_THR_CENTER,Indicates the center of the DPLL threshold value" "0,1" group.word 0x60604++0x1 line.word 0x0 "L0_AON_RX_ADPT_IQ_LIMIT,RX IQ Adaptation Offset Limit" hexmask.word.byte 0x0 5.--9. 1. "RIGHT_LIMIT,The max IQ offset from Calibrated IQ for right-side IQ sweep" newline hexmask.word.byte 0x0 0.--4. 1. "LEFT_LIMIT,The max IQ offset from Calibrated IQ for left-side IQ sweep" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list ad:0x4C880000 ad:0x4C880400 ad:0x4C880800 ad:0x4C880C00 ad:0x4C881000 ad:0x4C881400 ad:0x4C881800 ad:0x4C881C00 ad:0x4C882000 ad:0x4C882400 ad:0x4C882800 ad:0x4C882C00 ad:0x4C883000 ad:0x4C883400 ad:0x4C883800 ad:0x4C883C00) tree "RAWMEM_D_ROM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_ROM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list ad:0x4C884000 ad:0x4C884400 ad:0x4C884800 ad:0x4C884C00 ad:0x4C885000 ad:0x4C885400 ad:0x4C885800 ad:0x4C885C00 ad:0x4C886000 ad:0x4C886400 ad:0x4C886800 ad:0x4C886C00 ad:0x4C887000 ad:0x4C887400 ad:0x4C887800 ad:0x4C887C00) tree "RAWMEM_D_ROM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_ROM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F)(list ad:0x4C888000 ad:0x4C888400 ad:0x4C888800 ad:0x4C888C00 ad:0x4C889000 ad:0x4C889400 ad:0x4C889800 ad:0x4C889C00 ad:0x4C88A000 ad:0x4C88A400 ad:0x4C88A800 ad:0x4C88AC00 ad:0x4C88B000 ad:0x4C88B400 ad:0x4C88B800 ad:0x4C88BC00) tree "RAWMEM_D_ROM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_ROM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F)(list ad:0x4C88C000 ad:0x4C88C400 ad:0x4C88C800 ad:0x4C88CC00 ad:0x4C88D000 ad:0x4C88D400 ad:0x4C88D800 ad:0x4C88DC00 ad:0x4C88E000 ad:0x4C88E400 ad:0x4C88E800 ad:0x4C88EC00 ad:0x4C88F000 ad:0x4C88F400 ad:0x4C88F800 ad:0x4C88FC00) tree "RAWMEM_D_ROM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_ROM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_ROM_CMNx_By_Rz[$1]" rgroup.word ($2)++0x1 line.word 0x0 "RAWMEM_D_ROM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list ad:0x4C8A0000 ad:0x4C8A0400 ad:0x4C8A0800 ad:0x4C8A0C00 ad:0x4C8A1000 ad:0x4C8A1400 ad:0x4C8A1800 ad:0x4C8A1C00 ad:0x4C8A2000 ad:0x4C8A2400 ad:0x4C8A2800 ad:0x4C8A2C00 ad:0x4C8A3000 ad:0x4C8A3400 ad:0x4C8A3800 ad:0x4C8A3C00) tree "RAWMEM_D_RAM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_RAM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list ad:0x4C8A4000 ad:0x4C8A4400 ad:0x4C8A4800 ad:0x4C8A4C00 ad:0x4C8A5000 ad:0x4C8A5400 ad:0x4C8A5800 ad:0x4C8A5C00 ad:0x4C8A6000 ad:0x4C8A6400 ad:0x4C8A6800 ad:0x4C8A6C00 ad:0x4C8A7000 ad:0x4C8A7400 ad:0x4C8A7800 ad:0x4C8A7C00) tree "RAWMEM_D_RAM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_RAM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F)(list ad:0x4C8A8000 ad:0x4C8A8400 ad:0x4C8A8800 ad:0x4C8A8C00 ad:0x4C8A9000 ad:0x4C8A9400 ad:0x4C8A9800 ad:0x4C8A9C00 ad:0x4C8AA000 ad:0x4C8AA400 ad:0x4C8AA800 ad:0x4C8AAC00 ad:0x4C8AB000 ad:0x4C8AB400 ad:0x4C8AB800 ad:0x4C8ABC00) tree "RAWMEM_D_RAM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_RAM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end repeat 16. (list 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F)(list ad:0x4C8AC000 ad:0x4C8AC400 ad:0x4C8AC800 ad:0x4C8ACC00 ad:0x4C8AD000 ad:0x4C8AD400 ad:0x4C8AD800 ad:0x4C8ADC00 ad:0x4C8AE000 ad:0x4C8AE400 ad:0x4C8AE800 ad:0x4C8AEC00 ad:0x4C8AF000 ad:0x4C8AF400 ad:0x4C8AF800 ad:0x4C8AFC00) tree "RAWMEM_D_RAM_CMNx[$1]" base $2 repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list 0x0 0x80 0x100 0x180 0x200 0x280 0x300 0x380) tree "RAWMEM_D_RAM_CMNx_By[$1]" repeat 16. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF)(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end repeat 16. (list 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F)(list 0x40 0x44 0x48 0x4C 0x50 0x54 0x58 0x5C 0x60 0x64 0x68 0x6C 0x70 0x74 0x78 0x7C) tree "RAWMEM_D_RAM_CMNx_By_Rz[$1]" group.word ($2)++0x1 line.word 0x0 "RAWMEM_D_RAM_CMN_B_R,Common mem #x. Bank #y. Reg #z" hexmask.word 0x0 0.--15. 1. "DAT,Memory data" tree.end repeat.end tree.end repeat.end tree.end repeat.end tree.end tree "" base ad:0x4C800000 group.word 0x114++0x1 line.word 0x0 "GLOBAL_CTRL_EX_0,PHY Global extra controll register" bitfld.word 0x0 0. "PHY_SRAM_BYPASS,SRAM bypass" "0,1" group.word 0x118++0x1 line.word 0x0 "GLOBAL_CTRL_EX_1,PHY Global extra controll register" bitfld.word 0x0 4. "PHY_TEST_STOP_CLK_EN,Stop clock test mode enable" "0,1" bitfld.word 0x0 0. "PHY_TEST_FLYOVER_EN,Enable flyover test mode" "0,1" group.word 0x124++0x1 line.word 0x0 "GLOBAL_CTRL_EX_4,PHY Global extra controll register" bitfld.word 0x0 14. "PHY_PMA_PWR_STABLE,Power stable for PMA" "0,1" bitfld.word 0x0 12. "PHY_PG_RESET,Power gated reset" "0,1" bitfld.word 0x0 10. "PHY_PG_MODE_EN,Power gating support enable" "0,1" bitfld.word 0x0 8. "PHY_PCS_PWR_STABLE,Power stable for Raw PCS" "0,1" bitfld.word 0x0 0.--1. "PHY_VPH_NOMINAL,VPH Nominal Selection (vph_nominal)" "0,1,2,3" group.word 0x200AC++0x1 line.word 0x0 "MPLLA_CTRL_EX_0,MPLLA extra controll register" bitfld.word 0x0 0. "PHY_MPLLA_FORCE_EN,MPLLA force enable" "0,1" group.word 0x400AC++0x1 line.word 0x0 "MPLLB_CTRL_EX_0,MPLLB extra controll register" bitfld.word 0x0 0. "PHY_MPLLB_FORCE_EN,MPLLA force enable" "0,1" tree.end tree.end tree "GPU (Graphics Processing Unit Domain)" base ad:0x0 tree "GPU_BLK_CTRL_GPUMIX" base ad:0x4D810000 group.long 0x0++0xB line.long 0x0 "STRIPING_GRANULE,Striping Granule Register" hexmask.long.byte 0x0 0.--3. 1. "STRIPING_GRANULE,Striping Granule Bits" line.long 0x4 "TEXFMTENABLE,TEXFMT Enable Register" hexmask.long 0x4 0.--31. 1. "TEXFMTENABLE,TEXFMT Enable Bits" line.long 0x8 "GPURESET,GPU RESET Relase Register" bitfld.long 0x8 0. "GPURR,GPU Reset Release" "0,1" tree.end tree "GPU_MALI" tree "GPU_MALI_DOORBELLS" base ad:0x4D980000 wgroup.long 0x0++0x3 line.long 0x0 "DOORBELL0,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x10000++0x3 line.long 0x0 "DOORBELL1,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x20000++0x3 line.long 0x0 "DOORBELL2,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x30000++0x3 line.long 0x0 "DOORBELL3,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x40000++0x3 line.long 0x0 "DOORBELL4,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x50000++0x3 line.long 0x0 "DOORBELL5,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x60000++0x3 line.long 0x0 "DOORBELL6,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x70000++0x3 line.long 0x0 "DOORBELL7,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x80000++0x3 line.long 0x0 "DOORBELL8,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x90000++0x3 line.long 0x0 "DOORBELL9,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0xA0000++0x3 line.long 0x0 "DOORBELL10,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0xB0000++0x3 line.long 0x0 "DOORBELL11,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0xC0000++0x3 line.long 0x0 "DOORBELL12,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0xD0000++0x3 line.long 0x0 "DOORBELL13,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0xE0000++0x3 line.long 0x0 "DOORBELL14,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0xF0000++0x3 line.long 0x0 "DOORBELL15,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x100000++0x3 line.long 0x0 "DOORBELL16,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x110000++0x3 line.long 0x0 "DOORBELL17,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x120000++0x3 line.long 0x0 "DOORBELL18,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x130000++0x3 line.long 0x0 "DOORBELL19,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x140000++0x3 line.long 0x0 "DOORBELL20,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x150000++0x3 line.long 0x0 "DOORBELL21,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x160000++0x3 line.long 0x0 "DOORBELL22,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x170000++0x3 line.long 0x0 "DOORBELL23,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x180000++0x3 line.long 0x0 "DOORBELL24,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x190000++0x3 line.long 0x0 "DOORBELL25,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x1A0000++0x3 line.long 0x0 "DOORBELL26,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x1B0000++0x3 line.long 0x0 "DOORBELL27,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x1C0000++0x3 line.long 0x0 "DOORBELL28,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x1D0000++0x3 line.long 0x0 "DOORBELL29,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x1E0000++0x3 line.long 0x0 "DOORBELL30,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x1F0000++0x3 line.long 0x0 "DOORBELL31,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x200000++0x3 line.long 0x0 "DOORBELL32,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x210000++0x3 line.long 0x0 "DOORBELL33,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x220000++0x3 line.long 0x0 "DOORBELL34,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x230000++0x3 line.long 0x0 "DOORBELL35,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x240000++0x3 line.long 0x0 "DOORBELL36,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x250000++0x3 line.long 0x0 "DOORBELL37,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x260000++0x3 line.long 0x0 "DOORBELL38,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x270000++0x3 line.long 0x0 "DOORBELL39,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x280000++0x3 line.long 0x0 "DOORBELL40,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x290000++0x3 line.long 0x0 "DOORBELL41,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x2A0000++0x3 line.long 0x0 "DOORBELL42,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x2B0000++0x3 line.long 0x0 "DOORBELL43,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x2C0000++0x3 line.long 0x0 "DOORBELL44,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x2D0000++0x3 line.long 0x0 "DOORBELL45,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x2E0000++0x3 line.long 0x0 "DOORBELL46,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x2F0000++0x3 line.long 0x0 "DOORBELL47,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x300000++0x3 line.long 0x0 "DOORBELL48,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x310000++0x3 line.long 0x0 "DOORBELL49,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x320000++0x3 line.long 0x0 "DOORBELL50,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x330000++0x3 line.long 0x0 "DOORBELL51,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x340000++0x3 line.long 0x0 "DOORBELL52,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x350000++0x3 line.long 0x0 "DOORBELL53,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x360000++0x3 line.long 0x0 "DOORBELL54,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x370000++0x3 line.long 0x0 "DOORBELL55,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x380000++0x3 line.long 0x0 "DOORBELL56,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x390000++0x3 line.long 0x0 "DOORBELL57,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x3A0000++0x3 line.long 0x0 "DOORBELL58,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x3B0000++0x3 line.long 0x0 "DOORBELL59,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x3C0000++0x3 line.long 0x0 "DOORBELL60,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x3D0000++0x3 line.long 0x0 "DOORBELL61,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x3E0000++0x3 line.long 0x0 "DOORBELL62,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" wgroup.long 0x3F0000++0x3 line.long 0x0 "DOORBELL63,DOORBELL" hexmask.long 0x0 0.--31. 1. "MASK,MASK" tree.end tree "GPU_MALI_GPU_REGISTERS" base ad:0x4D900000 rgroup.long 0x0++0x1F line.long 0x0 "GPU_ID,GPU_ID" hexmask.long.byte 0x0 28.--31. 1. "ARCH_MAJOR,ARCH_MAJOR" hexmask.long.byte 0x0 24.--27. 1. "ARCH_MINOR,ARCH_MINOR" newline hexmask.long.byte 0x0 20.--23. 1. "ARCH_REV,ARCH_REV" hexmask.long.byte 0x0 16.--19. 1. "PRODUCT_MAJOR,PRODUCT_MAJOR" newline hexmask.long.byte 0x0 12.--15. 1. "VERSION_MAJOR,VERSION_MAJOR" hexmask.long.byte 0x0 4.--11. 1. "VERSION_MINOR,VERSION_MINOR" newline hexmask.long.byte 0x0 0.--3. 1. "VERSION_STATUS,VERSION_STATUS" line.long 0x4 "L2_FEATURES,L2_FEATURES" hexmask.long.byte 0x4 24.--31. 1. "BUS_WIDTH,BUS_WIDTH" hexmask.long.byte 0x4 16.--23. 1. "CACHE_SIZE,CACHE_SIZE" newline hexmask.long.byte 0x4 8.--15. 1. "ASSOCIATIVITY,ASSOCIATIVITY" hexmask.long.byte 0x4 0.--7. 1. "LINE_SIZE,LINE_SIZE" line.long 0x8 "CORE_FEATURES,CORE_FEATURES" hexmask.long.tbyte 0x8 8.--31. 1. "reserved_word0_bit8_width24,reserved_word0_bit8_width24" hexmask.long.byte 0x8 0.--7. 1. "CORE_VARIANT,CORE_VARIANT" line.long 0xC "TILER_FEATURES,TILER_FEATURES" hexmask.long.tbyte 0xC 12.--31. 1. "reserved_word0_bit12_width20,reserved_word0_bit12_width20" hexmask.long.byte 0xC 8.--11. 1. "MAX_LEVELS,MAX_LEVELS" newline bitfld.long 0xC 6.--7. "reserved_word0_bit6_width2,reserved_word0_bit6_width2" "0,1,2,3" hexmask.long.byte 0xC 0.--5. 1. "BIN_SIZE,BIN_SIZE" line.long 0x10 "MEM_FEATURES,MEM_FEATURES" hexmask.long.tbyte 0x10 12.--31. 1. "reserved_word0_bit12_width20,reserved_word0_bit12_width20" hexmask.long.byte 0x10 8.--11. 1. "L2_SLICES,L2_SLICES" newline hexmask.long.byte 0x10 2.--7. 1. "reserved_word0_bit2_width6,reserved_word0_bit2_width6" bitfld.long 0x10 1. "COHERENT_SUPER_GROUP,COHERENT_SUPER_GROUP" "0,1" newline bitfld.long 0x10 0. "COHERENT_CORE_GROUP,COHERENT_CORE_GROUP" "0,1" line.long 0x14 "MMU_FEATURES,MMU_FEATURES" hexmask.long.word 0x14 16.--31. 1. "reserved_word0_bit16_width16,reserved_word0_bit16_width16" hexmask.long.byte 0x14 8.--15. 1. "PA_BITS,PA_BITS" newline hexmask.long.byte 0x14 0.--7. 1. "VA_BITS,VA_BITS" line.long 0x18 "AS_PRESENT,AS_PRESENT" hexmask.long 0x18 0.--31. 1. "present,present" line.long 0x1C "CSF_ID,CSF_ID" hexmask.long.byte 0x1C 26.--31. 1. "CSHW_MAJOR,CSHW_MAJOR" hexmask.long.byte 0x1C 20.--25. 1. "CSHW_MINOR,CSHW_MINOR" newline hexmask.long.byte 0x1C 16.--19. 1. "CSHW_REV,CSHW_REV" hexmask.long.byte 0x1C 10.--15. 1. "MCU_MAJOR,MCU_MAJOR" newline hexmask.long.byte 0x1C 4.--9. 1. "MCU_MINOR,MCU_MINOR" hexmask.long.byte 0x1C 0.--3. 1. "MCU_REV,MCU_REV" group.long 0x20++0xB line.long 0x0 "GPU_IRQ_RAWSTAT,GPU_IRQ_RAWSTAT" hexmask.long.word 0x0 20.--31. 1. "reserved_word0_bit20_width12,reserved_word0_bit20_width12" bitfld.long 0x0 19. "MCU_STATUS,MCU_STATUS" "0,1" newline rbitfld.long 0x0 18. "DOORBELL_MIRROR,DOORBELL_MIRROR" "0,1" bitfld.long 0x0 17. "CLEAN_CACHES_COMPLETED,CLEAN_CACHES_COMPLETED" "0,1" newline hexmask.long.byte 0x0 11.--16. 1. "reserved_word0_bit11_width6,reserved_word0_bit11_width6" bitfld.long 0x0 10. "POWER_CHANGED_ALL,POWER_CHANGED_ALL" "0,1" newline bitfld.long 0x0 9. "POWER_CHANGED_SINGLE,POWER_CHANGED_SINGLE" "0,1" bitfld.long 0x0 8. "RESET_COMPLETED,RESET_COMPLETED" "0,1" newline hexmask.long.byte 0x0 2.--7. 1. "reserved_word0_bit2_width6,reserved_word0_bit2_width6" bitfld.long 0x0 1. "GPU_PROTECTED_FAULT,GPU_PROTECTED_FAULT" "0,1" newline bitfld.long 0x0 0. "GPU_FAULT,GPU_FAULT" "0,1" line.long 0x4 "GPU_IRQ_CLEAR,GPU_IRQ_CLEAR" hexmask.long.word 0x4 20.--31. 1. "reserved_word0_bit20_width12,reserved_word0_bit20_width12" bitfld.long 0x4 19. "MCU_STATUS,MCU_STATUS" "0,1" newline rbitfld.long 0x4 18. "reserved_word0_bit18_width1,reserved_word0_bit18_width1" "0,1" bitfld.long 0x4 17. "CLEAN_CACHES_COMPLETED,CLEAN_CACHES_COMPLETED" "0,1" newline hexmask.long.byte 0x4 11.--16. 1. "reserved_word0_bit11_width6,reserved_word0_bit11_width6" bitfld.long 0x4 10. "POWER_CHANGED_ALL,POWER_CHANGED_ALL" "0,1" newline bitfld.long 0x4 9. "POWER_CHANGED_SINGLE,POWER_CHANGED_SINGLE" "0,1" bitfld.long 0x4 8. "RESET_COMPLETED,RESET_COMPLETED" "0,1" newline hexmask.long.byte 0x4 2.--7. 1. "reserved_word0_bit2_width6,reserved_word0_bit2_width6" bitfld.long 0x4 1. "GPU_PROTECTED_FAULT,GPU_PROTECTED_FAULT" "0,1" newline bitfld.long 0x4 0. "GPU_FAULT,GPU_FAULT" "0,1" line.long 0x8 "GPU_IRQ_MASK,GPU_IRQ_MASK" hexmask.long.word 0x8 20.--31. 1. "reserved_word0_bit20_width12,reserved_word0_bit20_width12" bitfld.long 0x8 19. "MCU_STATUS,MCU_STATUS" "0,1" newline bitfld.long 0x8 18. "DOORBELL_MIRROR,DOORBELL_MIRROR" "0,1" bitfld.long 0x8 17. "CLEAN_CACHES_COMPLETED,CLEAN_CACHES_COMPLETED" "0,1" newline hexmask.long.byte 0x8 11.--16. 1. "reserved_word0_bit11_width6,reserved_word0_bit11_width6" bitfld.long 0x8 10. "POWER_CHANGED_ALL,POWER_CHANGED_ALL" "0,1" newline bitfld.long 0x8 9. "POWER_CHANGED_SINGLE,POWER_CHANGED_SINGLE" "0,1" bitfld.long 0x8 8. "RESET_COMPLETED,RESET_COMPLETED" "0,1" newline hexmask.long.byte 0x8 2.--7. 1. "reserved_word0_bit2_width6,reserved_word0_bit2_width6" bitfld.long 0x8 1. "GPU_PROTECTED_FAULT,GPU_PROTECTED_FAULT" "0,1" newline bitfld.long 0x8 0. "GPU_FAULT,GPU_FAULT" "0,1" rgroup.long 0x2C++0x3 line.long 0x0 "GPU_IRQ_STATUS,GPU_IRQ_STATUS" hexmask.long.word 0x0 20.--31. 1. "reserved_word0_bit20_width12,reserved_word0_bit20_width12" bitfld.long 0x0 19. "MCU_STATUS,MCU_STATUS" "0,1" newline bitfld.long 0x0 18. "DOORBELL_MIRROR,DOORBELL_MIRROR" "0,1" bitfld.long 0x0 17. "CLEAN_CACHES_COMPLETED,CLEAN_CACHES_COMPLETED" "0,1" newline hexmask.long.byte 0x0 11.--16. 1. "reserved_word0_bit11_width6,reserved_word0_bit11_width6" bitfld.long 0x0 10. "POWER_CHANGED_ALL,POWER_CHANGED_ALL" "0,1" newline bitfld.long 0x0 9. "POWER_CHANGED_SINGLE,POWER_CHANGED_SINGLE" "0,1" bitfld.long 0x0 8. "RESET_COMPLETED,RESET_COMPLETED" "0,1" newline hexmask.long.byte 0x0 2.--7. 1. "reserved_word0_bit2_width6,reserved_word0_bit2_width6" bitfld.long 0x0 1. "GPU_PROTECTED_FAULT,GPU_PROTECTED_FAULT" "0,1" newline bitfld.long 0x0 0. "GPU_FAULT,GPU_FAULT" "0,1" wgroup.long 0x30++0x3 line.long 0x0 "GPU_COMMAND,GPU_COMMAND" hexmask.long.tbyte 0x0 8.--31. 1. "payload,payload" hexmask.long.byte 0x0 0.--7. 1. "command,command" rgroup.long 0x34++0x3 line.long 0x0 "GPU_STATUS,GPU_STATUS" bitfld.long 0x0 31. "reserved_word0_bit31_width1,reserved_word0_bit31_width1" "0,1" hexmask.long.tbyte 0x0 9.--30. 1. "reserved_word0_bit9_width22,reserved_word0_bit9_width22" newline bitfld.long 0x0 8. "GPU_DBG_ENABLED,GPU_DBG_ENABLED" "0,1" bitfld.long 0x0 7. "PROTECTED_MODE_ACTIVE,PROTECTED_MODE_ACTIVE" "0,1" newline bitfld.long 0x0 5.--6. "reserved_word0_bit5_width2,reserved_word0_bit5_width2" "0,1,2,3" bitfld.long 0x0 4. "PAGE_FAULT,PAGE_FAULT" "0,1" newline bitfld.long 0x0 2.--3. "reserved_word0_bit2_width2,reserved_word0_bit2_width2" "0,1,2,3" bitfld.long 0x0 1. "PWR_ACTIVE,PWR_ACTIVE" "0,1" newline bitfld.long 0x0 0. "GPU_ACTIVE,GPU_ACTIVE" "0,1" rgroup.long 0x3C++0xB line.long 0x0 "GPU_FAULTSTATUS,GPU_FAULTSTATUS" hexmask.long.word 0x0 16.--31. 1. "SOURCE_ID,SOURCE_ID" hexmask.long.byte 0x0 12.--15. 1. "JASID,JASID" newline bitfld.long 0x0 11. "JASID_VALID,JASID_VALID" "0,1" bitfld.long 0x0 10. "ADDRESS_VALID,ADDRESS_VALID" "0,1" newline bitfld.long 0x0 8.--9. "ACCESS_TYPE,ACCESS_TYPE" "0: no description available,1: no description available,2: no description available,3: no description available" hexmask.long.byte 0x0 0.--7. 1. "EXCEPTION_TYPE,EXCEPTION_TYPE" line.long 0x4 "GPU_FAULTADDRESS_LO,GPU_FAULTADDRESS_LO" hexmask.long 0x4 0.--31. 1. "pointer,pointer" line.long 0x8 "GPU_FAULTADDRESS_HI,GPU_FAULTADDRESS_HI" hexmask.long 0x8 0.--31. 1. "pointer,pointer" group.long 0x48++0x3 line.long 0x0 "L2_CONFIG,L2_CONFIG" hexmask.long.byte 0x0 24.--31. 1. "HASH_FUNCTION,HASH_FUNCTION" hexmask.long.byte 0x0 16.--23. 1. "CACHE_SIZE,CACHE_SIZE" newline hexmask.long.word 0x0 0.--15. 1. "reserved_word0_bit0_width16,reserved_word0_bit0_width16" wgroup.long 0x50++0x3 line.long 0x0 "PWR_KEY,PWR_KEY" hexmask.long 0x0 0.--31. 1. "key,key" group.long 0x54++0x7 line.long 0x0 "PWR_OVERRIDE0,PWR_OVERRIDE0" rbitfld.long 0x0 30.--31. "reserved_word0_bit30_width2,reserved_word0_bit30_width2" "0,1,2,3" hexmask.long.byte 0x0 24.--29. 1. "THROTTLE_LIMIT,THROTTLE_LIMIT" newline bitfld.long 0x0 23. "THROTTLE_ENABLE,THROTTLE_ENABLE" "0,1" rbitfld.long 0x0 22. "reserved_word0_bit22_width1,reserved_word0_bit22_width1" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "PWRTRANS_LIMIT,PWRTRANS_LIMIT" bitfld.long 0x0 14.--15. "FUNC_ISO_ACK_OVERRIDE,FUNC_ISO_ACK_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" newline bitfld.long 0x0 12.--13. "FUNC_ISO_OVERRIDE,FUNC_ISO_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" bitfld.long 0x0 10.--11. "ISOLATE_ACK_OVERRIDE,ISOLATE_ACK_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" newline bitfld.long 0x0 8.--9. "PWRUP_ACK_OVERRIDE,PWRUP_ACK_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" rbitfld.long 0x0 6.--7. "reserved_word0_bit6_width2,reserved_word0_bit6_width2" "0,1,2,3" newline bitfld.long 0x0 4.--5. "RESET_OVERRIDE,RESET_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" bitfld.long 0x0 2.--3. "ISOLATE_OVERRIDE,ISOLATE_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" newline bitfld.long 0x0 0.--1. "PWRUP_OVERRIDE,PWRUP_OVERRIDE" "0: no description available,1: no description available,2: no description available,3: no description available" line.long 0x4 "PWR_OVERRIDE1,PWR_OVERRIDE1" hexmask.long 0x4 0.--31. 1. "PWRTRANS_VENDOR,PWRTRANS_VENDOR" group.long 0x88++0x7 line.long 0x0 "TIMESTAMP_OFFSET_LO,TIMESTAMP_OFFSET_LO" hexmask.long 0x0 0.--31. 1. "offset,offset" line.long 0x4 "TIMESTAMP_OFFSET_HI,TIMESTAMP_OFFSET_HI" hexmask.long 0x4 0.--31. 1. "offset,offset" rgroup.long 0x90++0x2F line.long 0x0 "CYCLE_COUNT_LO,CYCLE_COUNT_LO" hexmask.long 0x0 0.--31. 1. "count,count" line.long 0x4 "CYCLE_COUNT_HI,CYCLE_COUNT_HI" hexmask.long 0x4 0.--31. 1. "count,count" line.long 0x8 "TIMESTAMP_LO,TIMESTAMP_LO" hexmask.long 0x8 0.--31. 1. "timestamp,timestamp" line.long 0xC "TIMESTAMP_HI,TIMESTAMP_HI" hexmask.long 0xC 0.--31. 1. "timestamp,timestamp" line.long 0x10 "THREAD_MAX_THREADS,THREAD_MAX_THREADS" hexmask.long 0x10 0.--31. 1. "threads,threads" line.long 0x14 "THREAD_MAX_WORKGROUP_SIZE,THREAD_MAX_WORKGROUP_SIZE" hexmask.long 0x14 0.--31. 1. "threads,threads" line.long 0x18 "THREAD_MAX_BARRIER_SIZE,THREAD_MAX_BARRIER_SIZE" hexmask.long 0x18 0.--31. 1. "threads,threads" line.long 0x1C "THREAD_FEATURES,THREAD_FEATURES" hexmask.long.byte 0x1C 24.--31. 1. "MAX_TASK_QUEUE,MAX_TASK_QUEUE" bitfld.long 0x1C 22.--23. "IMPLEMENTATION_TECHNOLOGY,IMPLEMENTATION_TECHNOLOGY" "0: no description available,1: no description available,2: no description available,3: no description available" newline hexmask.long.tbyte 0x1C 0.--21. 1. "MAX_REGISTERS,MAX_REGISTERS" line.long 0x20 "TEXTURE_FEATURES_0,TEXTURE_FEATURES_0" hexmask.long 0x20 0.--31. 1. "format,format" line.long 0x24 "TEXTURE_FEATURES_1,TEXTURE_FEATURES_1" hexmask.long 0x24 0.--31. 1. "reserved_word0_bit0_width32,reserved_word0_bit0_width32" line.long 0x28 "TEXTURE_FEATURES_2,TEXTURE_FEATURES_2" hexmask.long 0x28 0.--31. 1. "reserved_word0_bit0_width32,reserved_word0_bit0_width32" line.long 0x2C "TEXTURE_FEATURES_3,TEXTURE_FEATURES_3" hexmask.long 0x2C 0.--31. 1. "reserved_word0_bit0_width32,reserved_word0_bit0_width32" rgroup.long 0x100++0x7 line.long 0x0 "SHADER_PRESENT_LO,SHADER_PRESENT_LO" hexmask.long 0x0 0.--31. 1. "present,present" line.long 0x4 "SHADER_PRESENT_HI,SHADER_PRESENT_HI" hexmask.long 0x4 0.--31. 1. "present,present" rgroup.long 0x110++0x7 line.long 0x0 "TILER_PRESENT_LO,TILER_PRESENT_LO" hexmask.long 0x0 0.--31. 1. "present,present" line.long 0x4 "TILER_PRESENT_HI,TILER_PRESENT_HI" hexmask.long 0x4 0.--31. 1. "present,present" rgroup.long 0x120++0x7 line.long 0x0 "L2_PRESENT_LO,L2_PRESENT_LO" hexmask.long 0x0 0.--31. 1. "present,present" line.long 0x4 "L2_PRESENT_HI,L2_PRESENT_HI" hexmask.long 0x4 0.--31. 1. "present,present" rgroup.long 0x140++0x7 line.long 0x0 "SHADER_READY_LO,SHADER_READY_LO" hexmask.long 0x0 0.--31. 1. "ready,ready" line.long 0x4 "SHADER_READY_HI,SHADER_READY_HI" hexmask.long 0x4 0.--31. 1. "ready,ready" rgroup.long 0x150++0x7 line.long 0x0 "TILER_READY_LO,TILER_READY_LO" hexmask.long 0x0 0.--31. 1. "ready,ready" line.long 0x4 "TILER_READY_HI,TILER_READY_HI" hexmask.long 0x4 0.--31. 1. "ready,ready" rgroup.long 0x160++0x7 line.long 0x0 "L2_READY_LO,L2_READY_LO" hexmask.long 0x0 0.--31. 1. "ready,ready" line.long 0x4 "L2_READY_HI,L2_READY_HI" hexmask.long 0x4 0.--31. 1. "ready,ready" wgroup.long 0x180++0x7 line.long 0x0 "SHADER_PWRON_LO,SHADER_PWRON_LO" hexmask.long 0x0 0.--31. 1. "request,request" line.long 0x4 "SHADER_PWRON_HI,SHADER_PWRON_HI" hexmask.long 0x4 0.--31. 1. "request,request" wgroup.long 0x190++0x7 line.long 0x0 "TILER_PWRON_LO,TILER_PWRON_LO" hexmask.long 0x0 0.--31. 1. "request,request" line.long 0x4 "TILER_PWRON_HI,TILER_PWRON_HI" hexmask.long 0x4 0.--31. 1. "request,request" wgroup.long 0x1A0++0x7 line.long 0x0 "L2_PWRON_LO,L2_PWRON_LO" hexmask.long 0x0 0.--31. 1. "request,request" line.long 0x4 "L2_PWRON_HI,L2_PWRON_HI" hexmask.long 0x4 0.--31. 1. "request,request" wgroup.long 0x1C0++0x7 line.long 0x0 "SHADER_PWROFF_LO,SHADER_PWROFF_LO" hexmask.long 0x0 0.--31. 1. "request,request" line.long 0x4 "SHADER_PWROFF_HI,SHADER_PWROFF_HI" hexmask.long 0x4 0.--31. 1. "request,request" wgroup.long 0x1D0++0x7 line.long 0x0 "TILER_PWROFF_LO,TILER_PWROFF_LO" hexmask.long 0x0 0.--31. 1. "request,request" line.long 0x4 "TILER_PWROFF_HI,TILER_PWROFF_HI" hexmask.long 0x4 0.--31. 1. "request,request" wgroup.long 0x1E0++0x7 line.long 0x0 "L2_PWROFF_LO,L2_PWROFF_LO" hexmask.long 0x0 0.--31. 1. "request,request" line.long 0x4 "L2_PWROFF_HI,L2_PWROFF_HI" hexmask.long 0x4 0.--31. 1. "request,request" rgroup.long 0x200++0x7 line.long 0x0 "SHADER_PWRTRANS_LO,SHADER_PWRTRANS_LO" hexmask.long 0x0 0.--31. 1. "changing,changing" line.long 0x4 "SHADER_PWRTRANS_HI,SHADER_PWRTRANS_HI" hexmask.long 0x4 0.--31. 1. "changing,changing" rgroup.long 0x210++0x7 line.long 0x0 "TILER_PWRTRANS_LO,TILER_PWRTRANS_LO" hexmask.long 0x0 0.--31. 1. "changing,changing" line.long 0x4 "TILER_PWRTRANS_HI,TILER_PWRTRANS_HI" hexmask.long 0x4 0.--31. 1. "changing,changing" rgroup.long 0x220++0x7 line.long 0x0 "L2_PWRTRANS_LO,L2_PWRTRANS_LO" hexmask.long 0x0 0.--31. 1. "changing,changing" line.long 0x4 "L2_PWRTRANS_HI,L2_PWRTRANS_HI" hexmask.long 0x4 0.--31. 1. "changing,changing" rgroup.long 0x240++0x7 line.long 0x0 "SHADER_PWRACTIVE_LO,SHADER_PWRACTIVE_LO" hexmask.long 0x0 0.--31. 1. "active,active" line.long 0x4 "SHADER_PWRACTIVE_HI,SHADER_PWRACTIVE_HI" hexmask.long 0x4 0.--31. 1. "active,active" rgroup.long 0x250++0x7 line.long 0x0 "TILER_PWRACTIVE_LO,TILER_PWRACTIVE_LO" hexmask.long 0x0 0.--31. 1. "active,active" line.long 0x4 "TILER_PWRACTIVE_HI,TILER_PWRACTIVE_HI" hexmask.long 0x4 0.--31. 1. "active,active" rgroup.long 0x260++0x7 line.long 0x0 "L2_PWRACTIVE_LO,L2_PWRACTIVE_LO" hexmask.long 0x0 0.--31. 1. "active,active" line.long 0x4 "L2_PWRACTIVE_HI,L2_PWRACTIVE_HI" hexmask.long 0x4 0.--31. 1. "active,active" rgroup.long 0x280++0x3 line.long 0x0 "REVIDR,REVIDR" hexmask.long 0x0 0.--31. 1. "revision,revision" rgroup.long 0x300++0x3 line.long 0x0 "COHERENCY_FEATURES,COHERENCY_FEATURES" hexmask.long 0x0 2.--31. 1. "reserved_word0_bit2_width30,reserved_word0_bit2_width30" bitfld.long 0x0 1. "ace,ace" "0,1" newline bitfld.long 0x0 0. "ace_lite,ace_lite" "0,1" group.long 0x304++0x3 line.long 0x0 "COHERENCY_ENABLE,COHERENCY_ENABLE" hexmask.long 0x0 0.--31. 1. "l2_cache_protocol_select,l2_cache_protocol_select" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4D900400 ad:0x4D900440 ad:0x4D900480 ad:0x4D9004C0 ad:0x4D900500 ad:0x4D900540 ad:0x4D900580 ad:0x4D9005C0) tree "AS[$1]" base $2 group.long ($2+0x2000)++0x17 line.long 0x0 "TRANSTAB_LO,TRANSTAB_LO" hexmask.long 0x0 4.--31. 1. "BASE,BASE" hexmask.long.byte 0x0 0.--3. 1. "BASE_RESERVED,BASE_RESERVED" line.long 0x4 "TRANSTAB_HI,TRANSTAB_HI" hexmask.long.tbyte 0x4 8.--31. 1. "BASE_RESERVED,BASE_RESERVED" hexmask.long.byte 0x4 0.--7. 1. "BASE,BASE" line.long 0x8 "MEMATTR_LO,MEMATTR_LO" hexmask.long.byte 0x8 24.--31. 1. "ATTRIBUTE3,ATTRIBUTE3" hexmask.long.byte 0x8 16.--23. 1. "ATTRIBUTE2,ATTRIBUTE2" newline hexmask.long.byte 0x8 8.--15. 1. "ATTRIBUTE1,ATTRIBUTE1" hexmask.long.byte 0x8 0.--7. 1. "ATTRIBUTE0,ATTRIBUTE0" line.long 0xC "MEMATTR_HI,MEMATTR_HI" hexmask.long.byte 0xC 24.--31. 1. "ATTRIBUTE7,ATTRIBUTE7" hexmask.long.byte 0xC 16.--23. 1. "ATTRIBUTE6,ATTRIBUTE6" newline hexmask.long.byte 0xC 8.--15. 1. "ATTRIBUTE5,ATTRIBUTE5" hexmask.long.byte 0xC 0.--7. 1. "ATTRIBUTE4,ATTRIBUTE4" line.long 0x10 "LOCKADDR_LO,LOCKADDR_LO" hexmask.long.tbyte 0x10 12.--31. 1. "LOCKADDR_BASE,LOCKADDR_BASE" hexmask.long.byte 0x10 6.--11. 1. "reserved_word0_bit6_width6,reserved_word0_bit6_width6" newline hexmask.long.byte 0x10 0.--5. 1. "LOCKADDR_SIZE,LOCKADDR_SIZE" line.long 0x14 "LOCKADDR_HI,LOCKADDR_HI" hexmask.long.word 0x14 16.--31. 1. "LOCKADDR_BASE_RESERVED,LOCKADDR_BASE_RESERVED" hexmask.long.word 0x14 0.--15. 1. "LOCKADDR_BASE,LOCKADDR_BASE" wgroup.long ($2+0x2018)++0x3 line.long 0x0 "COMMAND,COMMAND" hexmask.long.tbyte 0x0 8.--31. 1. "reserved_word0_bit8_width24,reserved_word0_bit8_width24" hexmask.long.byte 0x0 0.--7. 1. "command,command" rgroup.long ($2+0x201C)++0xF line.long 0x0 "FAULTSTATUS,FAULTSTATUS" hexmask.long.word 0x0 16.--31. 1. "SOURCE_ID,SOURCE_ID" hexmask.long.byte 0x0 10.--15. 1. "reserved_word0_bit10_width6,reserved_word0_bit10_width6" newline bitfld.long 0x0 8.--9. "ACCESS_TYPE,ACCESS_TYPE" "0: no description available,1: no description available,2: no description available,3: no description available" hexmask.long.byte 0x0 0.--7. 1. "EXCEPTION_TYPE,EXCEPTION_TYPE" line.long 0x4 "FAULTADDRESS_LO,FAULTADDRESS_LO" hexmask.long 0x4 0.--31. 1. "FAULT_ADDRESS,FAULT_ADDRESS" line.long 0x8 "FAULTADDRESS_HI,FAULTADDRESS_HI" hexmask.long 0x8 0.--31. 1. "FAULT_ADDRESS,FAULT_ADDRESS" line.long 0xC "STATUS,STATUS" hexmask.long 0xC 2.--31. 1. "reserved_word0_bit2_width30,reserved_word0_bit2_width30" bitfld.long 0xC 1. "AS_ACTIVE_INT,AS_ACTIVE_INT" "0,1" newline bitfld.long 0xC 0. "AS_ACTIVE_EXT,AS_ACTIVE_EXT" "0,1" group.long ($2+0x2030)++0x7 line.long 0x0 "TRANSCFG_LO,TRANSCFG_LO" rbitfld.long 0x0 31. "reserved_word0_bit31_width2,reserved_word0_bit31_width2" "0,1" bitfld.long 0x0 30. "R_ALLOCATE,R_ALLOCATE" "0: no description available,1: no description available" newline bitfld.long 0x0 28.--29. "PTW_SH,PTW_SH" "0: no description available,?,2: no description available,3: no description available" rbitfld.long 0x0 26.--27. "reserved_word0_bit26_width2,reserved_word0_bit26_width2" "0,1,2,3" newline bitfld.long 0x0 24.--25. "PTW_MEMATTR,PTW_MEMATTR" "?,1: no description available,2: no description available,?" rbitfld.long 0x0 23. "reserved_word0_bit23_width1,reserved_word0_bit23_width1" "0,1" newline bitfld.long 0x0 22. "SL_CONCAT_EN,SL_CONCAT_EN" "0,1" rbitfld.long 0x0 19.--21. "reserved_word0_bit19_width3,reserved_word0_bit19_width3" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 14.--18. 1. "OUTA_BITS,OUTA_BITS" rbitfld.long 0x0 11.--13. "reserved_word0_bit11_width3,reserved_word0_bit11_width3" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 6.--10. 1. "INA_BITS,INA_BITS" rbitfld.long 0x0 4.--5. "reserved_word0_bit4_width2,reserved_word0_bit4_width2" "0,1,2,3" newline hexmask.long.byte 0x0 0.--3. 1. "MODE,MODE" line.long 0x4 "TRANSCFG_HI,TRANSCFG_HI" hexmask.long.byte 0x4 28.--31. 1. "PTW_PBHA,PTW_PBHA" hexmask.long.tbyte 0x4 5.--27. 1. "reserved_word0_bit37_width23,reserved_word0_bit37_width23" newline bitfld.long 0x4 4. "XREADABLE,XREADABLE" "0,1" bitfld.long 0x4 3. "WXN,WXN" "0,1" newline bitfld.long 0x4 2. "DISABLE_AF_FAULT,DISABLE_AF_FAULT" "0,1" bitfld.long 0x4 1. "DISABLE_HIER_AP,DISABLE_HIER_AP" "0,1" newline rbitfld.long 0x4 0. "reserved_word0_bit31_width2,reserved_word0_bit31_width2" "0,1" rgroup.long ($2+0x2038)++0x7 line.long 0x0 "FAULTEXTRA_LO,FAULTEXTRA_LO" hexmask.long 0x0 0.--31. 1. "FAULT_ADDRESS,FAULT_ADDRESS" line.long 0x4 "FAULTEXTRA_HI,FAULTEXTRA_HI" hexmask.long 0x4 0.--31. 1. "FAULT_ADDRESS,FAULT_ADDRESS" tree.end repeat.end base ad:0x4D900000 group.long 0x700++0x3 line.long 0x0 "MCU_CONTROL,MCU_CONTROL" hexmask.long 0x0 2.--31. 1. "reserved_word0_bit2_width30,reserved_word0_bit2_width30" bitfld.long 0x0 0.--1. "REQ,REQ" "0: no description available,1: no description available,2: no description available,?" rgroup.long 0x704++0x3 line.long 0x0 "MCU_STATUS,MCU_STATUS" hexmask.long 0x0 2.--31. 1. "reserved_word0_bit2_width30,reserved_word0_bit2_width30" bitfld.long 0x0 0.--1. "VALUE,VALUE" "0: no description available,1: no description available,2: no description available,3: no description available" group.long 0x1000++0x3 line.long 0x0 "JOB_IRQ_RAWSTAT,JOB_IRQ_RAWSTAT" bitfld.long 0x0 31. "glb,glb" "0,1" hexmask.long 0x0 0.--30. 1. "csg,csg" wgroup.long 0x1004++0x3 line.long 0x0 "JOB_IRQ_CLEAR,JOB_IRQ_CLEAR" bitfld.long 0x0 31. "glb,glb" "0,1" hexmask.long 0x0 0.--30. 1. "csg,csg" group.long 0x1008++0x3 line.long 0x0 "JOB_IRQ_MASK,JOB_IRQ_MASK" bitfld.long 0x0 31. "glb,glb" "0,1" hexmask.long 0x0 0.--30. 1. "csg,csg" rgroup.long 0x100C++0x3 line.long 0x0 "JOB_IRQ_STATUS,JOB_IRQ_STATUS" bitfld.long 0x0 31. "glb,glb" "0,1" hexmask.long 0x0 0.--30. 1. "csg,csg" group.long 0x2000++0x3 line.long 0x0 "IRQ_RAWSTAT,IRQ_RAWSTAT" hexmask.long.word 0x0 16.--31. 1. "COMMAND_COMPLETED,COMMAND_COMPLETED" hexmask.long.word 0x0 0.--15. 1. "PAGE_FAULT,PAGE_FAULT" wgroup.long 0x2004++0x3 line.long 0x0 "IRQ_CLEAR,IRQ_CLEAR" hexmask.long.word 0x0 16.--31. 1. "COMMAND_COMPLETED,COMMAND_COMPLETED" hexmask.long.word 0x0 0.--15. 1. "PAGE_FAULT,PAGE_FAULT" group.long 0x2008++0x3 line.long 0x0 "IRQ_MASK,IRQ_MASK" hexmask.long.byte 0x0 24.--31. 1. "COMMAND_COMPLETED_RESERVED,COMMAND_COMPLETED_RESERVED" hexmask.long.byte 0x0 16.--23. 1. "COMMAND_COMPLETED,COMMAND_COMPLETED" newline hexmask.long.byte 0x0 8.--15. 1. "PAGE_FAULT_RESERVED,PAGE_FAULT_RESERVED" hexmask.long.byte 0x0 0.--7. 1. "PAGE_FAULT,PAGE_FAULT" rgroup.long 0x200C++0x3 line.long 0x0 "IRQ_STATUS,IRQ_STATUS" hexmask.long.word 0x0 16.--31. 1. "COMMAND_COMPLETED,COMMAND_COMPLETED" hexmask.long.word 0x0 0.--15. 1. "PAGE_FAULT,PAGE_FAULT" tree.end tree "GPU_MALI_IPA_CONTROL" base ad:0x4D940000 group.long 0x0++0x3 line.long 0x0 "COMMAND,COMMAND" hexmask.long.tbyte 0x0 8.--31. 1. "reserved_word0_bit8_width24,reserved_word0_bit8_width24" hexmask.long.byte 0x0 0.--7. 1. "command,command" rgroup.long 0x4++0x3 line.long 0x0 "STATUS,STATUS" bitfld.long 0x0 31. "timer_enabled,timer_enabled" "0,1" hexmask.long.tbyte 0x0 10.--30. 1. "reserved_word0_bit10_width21,reserved_word0_bit10_width21" bitfld.long 0x0 9. "reset,reset" "0,1" newline bitfld.long 0x0 8. "protected_mode,protected_mode" "0,1" hexmask.long.byte 0x0 3.--7. 1. "reserved_word0_bit3_width5,reserved_word0_bit3_width5" bitfld.long 0x0 2. "auto_active,auto_active" "0,1" newline bitfld.long 0x0 1. "timer_active,timer_active" "0,1" bitfld.long 0x0 0. "command_active,command_active" "0,1" group.long 0x8++0x3 line.long 0x0 "TIMER,TIMER" hexmask.long 0x0 0.--31. 1. "timeout,timeout" group.long 0x10++0x1F line.long 0x0 "SELECT_CSHW_LO,SELECT_CSHW_LO" hexmask.long.byte 0x0 24.--31. 1. "select3,select3" hexmask.long.byte 0x0 16.--23. 1. "select2,select2" hexmask.long.byte 0x0 8.--15. 1. "select1,select1" newline hexmask.long.byte 0x0 0.--7. 1. "select0,select0" line.long 0x4 "SELECT_CSHW_HI,SELECT_CSHW_HI" hexmask.long.byte 0x4 24.--31. 1. "select7,select7" hexmask.long.byte 0x4 16.--23. 1. "select6,select6" hexmask.long.byte 0x4 8.--15. 1. "select5,select5" newline hexmask.long.byte 0x4 0.--7. 1. "select4,select4" line.long 0x8 "SELECT_MEMSYS_LO,SELECT_MEMSYS_LO" hexmask.long.byte 0x8 24.--31. 1. "select3,select3" hexmask.long.byte 0x8 16.--23. 1. "select2,select2" hexmask.long.byte 0x8 8.--15. 1. "select1,select1" newline hexmask.long.byte 0x8 0.--7. 1. "select0,select0" line.long 0xC "SELECT_MEMSYS_HI,SELECT_MEMSYS_HI" hexmask.long.byte 0xC 24.--31. 1. "select7,select7" hexmask.long.byte 0xC 16.--23. 1. "select6,select6" hexmask.long.byte 0xC 8.--15. 1. "select5,select5" newline hexmask.long.byte 0xC 0.--7. 1. "select4,select4" line.long 0x10 "SELECT_TILER_LO,SELECT_TILER_LO" hexmask.long.byte 0x10 24.--31. 1. "select3,select3" hexmask.long.byte 0x10 16.--23. 1. "select2,select2" hexmask.long.byte 0x10 8.--15. 1. "select1,select1" newline hexmask.long.byte 0x10 0.--7. 1. "select0,select0" line.long 0x14 "SELECT_TILER_HI,SELECT_TILER_HI" hexmask.long.byte 0x14 24.--31. 1. "select7,select7" hexmask.long.byte 0x14 16.--23. 1. "select6,select6" hexmask.long.byte 0x14 8.--15. 1. "select5,select5" newline hexmask.long.byte 0x14 0.--7. 1. "select4,select4" line.long 0x18 "SELECT_SHADER_LO,SELECT_SHADER_LO" hexmask.long.byte 0x18 24.--31. 1. "select3,select3" hexmask.long.byte 0x18 16.--23. 1. "select2,select2" hexmask.long.byte 0x18 8.--15. 1. "select1,select1" newline hexmask.long.byte 0x18 0.--7. 1. "select0,select0" line.long 0x1C "SELECT_SHADER_HI,SELECT_SHADER_HI" hexmask.long.byte 0x1C 24.--31. 1. "select7,select7" hexmask.long.byte 0x1C 16.--23. 1. "select6,select6" hexmask.long.byte 0x1C 8.--15. 1. "select5,select5" newline hexmask.long.byte 0x1C 0.--7. 1. "select4,select4" rgroup.long 0x100++0xFF line.long 0x0 "VALUE_CSHW_N_LO_0,VALUE_CSHW_N_LO_0" hexmask.long 0x0 0.--31. 1. "value,value" line.long 0x4 "VALUE_CSHW_N_HI_0,VALUE_CSHW_N_HI_0" hexmask.long 0x4 0.--31. 1. "value,value" line.long 0x8 "VALUE_CSHW_N_LO_1,VALUE_CSHW_N_LO_1" hexmask.long 0x8 0.--31. 1. "value,value" line.long 0xC "VALUE_CSHW_N_HI_1,VALUE_CSHW_N_HI_1" hexmask.long 0xC 0.--31. 1. "value,value" line.long 0x10 "VALUE_CSHW_N_LO_2,VALUE_CSHW_N_LO_2" hexmask.long 0x10 0.--31. 1. "value,value" line.long 0x14 "VALUE_CSHW_N_HI_2,VALUE_CSHW_N_HI_2" hexmask.long 0x14 0.--31. 1. "value,value" line.long 0x18 "VALUE_CSHW_N_LO_3,VALUE_CSHW_N_LO_3" hexmask.long 0x18 0.--31. 1. "value,value" line.long 0x1C "VALUE_CSHW_N_HI_3,VALUE_CSHW_N_HI_3" hexmask.long 0x1C 0.--31. 1. "value,value" line.long 0x20 "VALUE_CSHW_N_LO_4,VALUE_CSHW_N_LO_4" hexmask.long 0x20 0.--31. 1. "value,value" line.long 0x24 "VALUE_CSHW_N_HI_4,VALUE_CSHW_N_HI_4" hexmask.long 0x24 0.--31. 1. "value,value" line.long 0x28 "VALUE_CSHW_N_LO_5,VALUE_CSHW_N_LO_5" hexmask.long 0x28 0.--31. 1. "value,value" line.long 0x2C "VALUE_CSHW_N_HI_5,VALUE_CSHW_N_HI_5" hexmask.long 0x2C 0.--31. 1. "value,value" line.long 0x30 "VALUE_CSHW_N_LO_6,VALUE_CSHW_N_LO_6" hexmask.long 0x30 0.--31. 1. "value,value" line.long 0x34 "VALUE_CSHW_N_HI_6,VALUE_CSHW_N_HI_6" hexmask.long 0x34 0.--31. 1. "value,value" line.long 0x38 "VALUE_CSHW_N_LO_7,VALUE_CSHW_N_LO_7" hexmask.long 0x38 0.--31. 1. "value,value" line.long 0x3C "VALUE_CSHW_N_HI_7,VALUE_CSHW_N_HI_7" hexmask.long 0x3C 0.--31. 1. "value,value" line.long 0x40 "VALUE_MEMSYS_N_LO_0,VALUE_MEMSYS_N_LO_0" hexmask.long 0x40 0.--31. 1. "value,value" line.long 0x44 "VALUE_MEMSYS_N_HI_0,VALUE_MEMSYS_N_HI_0" hexmask.long 0x44 0.--31. 1. "value,value" line.long 0x48 "VALUE_MEMSYS_N_LO_1,VALUE_MEMSYS_N_LO_1" hexmask.long 0x48 0.--31. 1. "value,value" line.long 0x4C "VALUE_MEMSYS_N_HI_1,VALUE_MEMSYS_N_HI_1" hexmask.long 0x4C 0.--31. 1. "value,value" line.long 0x50 "VALUE_MEMSYS_N_LO_2,VALUE_MEMSYS_N_LO_2" hexmask.long 0x50 0.--31. 1. "value,value" line.long 0x54 "VALUE_MEMSYS_N_HI_2,VALUE_MEMSYS_N_HI_2" hexmask.long 0x54 0.--31. 1. "value,value" line.long 0x58 "VALUE_MEMSYS_N_LO_3,VALUE_MEMSYS_N_LO_3" hexmask.long 0x58 0.--31. 1. "value,value" line.long 0x5C "VALUE_MEMSYS_N_HI_3,VALUE_MEMSYS_N_HI_3" hexmask.long 0x5C 0.--31. 1. "value,value" line.long 0x60 "VALUE_MEMSYS_N_LO_4,VALUE_MEMSYS_N_LO_4" hexmask.long 0x60 0.--31. 1. "value,value" line.long 0x64 "VALUE_MEMSYS_N_HI_4,VALUE_MEMSYS_N_HI_4" hexmask.long 0x64 0.--31. 1. "value,value" line.long 0x68 "VALUE_MEMSYS_N_LO_5,VALUE_MEMSYS_N_LO_5" hexmask.long 0x68 0.--31. 1. "value,value" line.long 0x6C "VALUE_MEMSYS_N_HI_5,VALUE_MEMSYS_N_HI_5" hexmask.long 0x6C 0.--31. 1. "value,value" line.long 0x70 "VALUE_MEMSYS_N_LO_6,VALUE_MEMSYS_N_LO_6" hexmask.long 0x70 0.--31. 1. "value,value" line.long 0x74 "VALUE_MEMSYS_N_HI_6,VALUE_MEMSYS_N_HI_6" hexmask.long 0x74 0.--31. 1. "value,value" line.long 0x78 "VALUE_MEMSYS_N_LO_7,VALUE_MEMSYS_N_LO_7" hexmask.long 0x78 0.--31. 1. "value,value" line.long 0x7C "VALUE_MEMSYS_N_HI_7,VALUE_MEMSYS_N_HI_7" hexmask.long 0x7C 0.--31. 1. "value,value" line.long 0x80 "VALUE_TILER_N_LO_0,VALUE_TILER_N_LO_0" hexmask.long 0x80 0.--31. 1. "value,value" line.long 0x84 "VALUE_TILER_N_HI_0,VALUE_TILER_N_HI_0" hexmask.long 0x84 0.--31. 1. "value,value" line.long 0x88 "VALUE_TILER_N_LO_1,VALUE_TILER_N_LO_1" hexmask.long 0x88 0.--31. 1. "value,value" line.long 0x8C "VALUE_TILER_N_HI_1,VALUE_TILER_N_HI_1" hexmask.long 0x8C 0.--31. 1. "value,value" line.long 0x90 "VALUE_TILER_N_LO_2,VALUE_TILER_N_LO_2" hexmask.long 0x90 0.--31. 1. "value,value" line.long 0x94 "VALUE_TILER_N_HI_2,VALUE_TILER_N_HI_2" hexmask.long 0x94 0.--31. 1. "value,value" line.long 0x98 "VALUE_TILER_N_LO_3,VALUE_TILER_N_LO_3" hexmask.long 0x98 0.--31. 1. "value,value" line.long 0x9C "VALUE_TILER_N_HI_3,VALUE_TILER_N_HI_3" hexmask.long 0x9C 0.--31. 1. "value,value" line.long 0xA0 "VALUE_TILER_N_LO_4,VALUE_TILER_N_LO_4" hexmask.long 0xA0 0.--31. 1. "value,value" line.long 0xA4 "VALUE_TILER_N_HI_4,VALUE_TILER_N_HI_4" hexmask.long 0xA4 0.--31. 1. "value,value" line.long 0xA8 "VALUE_TILER_N_LO_5,VALUE_TILER_N_LO_5" hexmask.long 0xA8 0.--31. 1. "value,value" line.long 0xAC "VALUE_TILER_N_HI_5,VALUE_TILER_N_HI_5" hexmask.long 0xAC 0.--31. 1. "value,value" line.long 0xB0 "VALUE_TILER_N_LO_6,VALUE_TILER_N_LO_6" hexmask.long 0xB0 0.--31. 1. "value,value" line.long 0xB4 "VALUE_TILER_N_HI_6,VALUE_TILER_N_HI_6" hexmask.long 0xB4 0.--31. 1. "value,value" line.long 0xB8 "VALUE_TILER_N_LO_7,VALUE_TILER_N_LO_7" hexmask.long 0xB8 0.--31. 1. "value,value" line.long 0xBC "VALUE_TILER_N_HI_7,VALUE_TILER_N_HI_7" hexmask.long 0xBC 0.--31. 1. "value,value" line.long 0xC0 "VALUE_SHADER_N_LO_0,VALUE_SHADER_N_LO_0" hexmask.long 0xC0 0.--31. 1. "value,value" line.long 0xC4 "VALUE_SHADER_N_HI_0,VALUE_SHADER_N_HI_0" hexmask.long 0xC4 0.--31. 1. "value,value" line.long 0xC8 "VALUE_SHADER_N_LO_1,VALUE_SHADER_N_LO_1" hexmask.long 0xC8 0.--31. 1. "value,value" line.long 0xCC "VALUE_SHADER_N_HI_1,VALUE_SHADER_N_HI_1" hexmask.long 0xCC 0.--31. 1. "value,value" line.long 0xD0 "VALUE_SHADER_N_LO_2,VALUE_SHADER_N_LO_2" hexmask.long 0xD0 0.--31. 1. "value,value" line.long 0xD4 "VALUE_SHADER_N_HI_2,VALUE_SHADER_N_HI_2" hexmask.long 0xD4 0.--31. 1. "value,value" line.long 0xD8 "VALUE_SHADER_N_LO_3,VALUE_SHADER_N_LO_3" hexmask.long 0xD8 0.--31. 1. "value,value" line.long 0xDC "VALUE_SHADER_N_HI_3,VALUE_SHADER_N_HI_3" hexmask.long 0xDC 0.--31. 1. "value,value" line.long 0xE0 "VALUE_SHADER_N_LO_4,VALUE_SHADER_N_LO_4" hexmask.long 0xE0 0.--31. 1. "value,value" line.long 0xE4 "VALUE_SHADER_N_HI_4,VALUE_SHADER_N_HI_4" hexmask.long 0xE4 0.--31. 1. "value,value" line.long 0xE8 "VALUE_SHADER_N_LO_5,VALUE_SHADER_N_LO_5" hexmask.long 0xE8 0.--31. 1. "value,value" line.long 0xEC "VALUE_SHADER_N_HI_5,VALUE_SHADER_N_HI_5" hexmask.long 0xEC 0.--31. 1. "value,value" line.long 0xF0 "VALUE_SHADER_N_LO_6,VALUE_SHADER_N_LO_6" hexmask.long 0xF0 0.--31. 1. "value,value" line.long 0xF4 "VALUE_SHADER_N_HI_6,VALUE_SHADER_N_HI_6" hexmask.long 0xF4 0.--31. 1. "value,value" line.long 0xF8 "VALUE_SHADER_N_LO_7,VALUE_SHADER_N_LO_7" hexmask.long 0xF8 0.--31. 1. "value,value" line.long 0xFC "VALUE_SHADER_N_HI_7,VALUE_SHADER_N_HI_7" hexmask.long 0xFC 0.--31. 1. "value,value" tree.end tree "GPU_MALI_USER" base ad:0x4D910000 rgroup.long 0x0++0x3 line.long 0x0 "LATEST_FLUSH,LATEST_FLUSH" bitfld.long 0x0 31. "ACTIVE,ACTIVE" "0,1" hexmask.long.byte 0x0 24.--30. 1. "reserved_word0_bit24_width7,reserved_word0_bit24_width7" hexmask.long.tbyte 0x0 0.--23. 1. "flush_id,flush_id" tree.end tree.end tree "GPU_TCU" base ad:0x4D800000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 1. "tcu_fuse_obs,fuse observation" "0,1" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree.end tree "HSIO_BLK_CTRL_HSIOMIX" base ad:0x4C010000 group.long 0x0++0xB line.long 0x0 "GPR_REG0,GPR Register 0" bitfld.long 0x0 8. "CRS_CLEAR,Clear Configuration Retry Status interrupt" "0,1" bitfld.long 0x0 7. "CFG_READY,Configuration ready" "0,1" newline bitfld.long 0x0 6. "USB_PHY_REF_CLK_SEL,USB PHY ref clock selection" "0: 24 MHz external oscillator,1: 100 MHz high performance PLL" bitfld.long 0x0 1. "PCIE2_PERST_N,PCIE2_PERST_N" "0,1" newline bitfld.long 0x0 0. "PCIE1_PERST_N,PCIE1_PERST_N" "0,1" line.long 0x4 "USB1_WAKEUP_CTRL,USB1 Wakeup Control" bitfld.long 0x4 31. "OTG_WAKE_ENABLE,Global wakeup interrupt enable. Used to clear interrupt. Default 0 same as WIE before." "0: Disable,1: Enable" bitfld.long 0x4 16. "PHY_BYPASSSEL,Transmitter Digital Bypass Select" "0,1" newline bitfld.long 0x4 15. "PHY_BYPASSDPEN,DP Transmitter Digital Bypass Enable" "0: Disable,1: Enable" bitfld.long 0x4 14. "PHY_BYPASSDPDATA,Data for DP Transmitter Digital Bypass" "0,1" newline bitfld.long 0x4 13. "PHY_BYPASSDMEN,DM Transmitter Digital Bypass Enable" "0: Disable,1: Enable" bitfld.long 0x4 12. "PHY_BYPASSDMDATA,Data for DM Transmitter Digital Bypass" "0,1" newline bitfld.long 0x4 11. "LOWSPEED_EN,Enable low-speed auto-resume feature" "0: Full/high speed,1: Low speed" bitfld.long 0x4 10. "AUTORESUME_ENDLY,Tuning the timing between dp/dm data and enable signal when auto-resume finish." "0,1" newline bitfld.long 0x4 9. "AUTORESUME_DATADLY,Please refer to the bit field description for AUTORESUME_ENDLY." "0,1" bitfld.long 0x4 8. "AUTORESUME_EN,Enable auto-resume feature. When using phy_bypass signal this bit should be 1'b0." "0: Disable,1: Enable" newline bitfld.long 0x4 5. "OTG_CONN_WAKEUP_EN,Enable signal for wakeup from connection or disconnection only for super-speed." "0: Disable,1: Enable" bitfld.long 0x4 4. "OTG_VBUS_SOURCE_SEL,otg_vbus_source_sel" "0: Select vbus_valid,1: Select sessvld" newline bitfld.long 0x4 3. "OTG_U3_WAKE_EN,Enable signal for wake up from u3 state only for super-speed" "0: Disable,1: Enable" bitfld.long 0x4 2. "OTG_ID_WAKEUP_EN,Enable signal for wake up from id change" "0: Disable,1: Enable" newline bitfld.long 0x4 1. "OTG_VBUS_WAKE_EN,Enable signal for wake up from vbus valid or session valid changes" "0: Disable,1: Enable" bitfld.long 0x4 0. "OTG_WKDPDMCHG_EN,Enable signal for wake up from dp/dm change." "0: Disable,1: Enable" line.long 0x8 "USB2_WAKEUP_CTRL,USB2 Wakeup Control" bitfld.long 0x8 31. "OTG_WAKE_ENABLE,Global wakeup interrupt enable. Used to clear interrupt. Default 0 same as WIE before." "0: Disable,1: Enable" bitfld.long 0x8 16. "PHY_BYPASSSEL,Transmitter Digital Bypass Select" "0,1" newline bitfld.long 0x8 15. "PHY_BYPASSDPEN,DP Transmitter Digital Bypass Enable" "0: Disable,1: Enable" bitfld.long 0x8 14. "PHY_BYPASSDPDATA,Data for DP Transmitter Digital Bypass" "0,1" newline bitfld.long 0x8 13. "PHY_BYPASSDMEN,DM Transmitter Digital Bypass Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "PHY_BYPASSDMDATA,Data for DM Transmitter Digital Bypass" "0,1" newline bitfld.long 0x8 11. "LOWSPEED_EN,Enable low-speed auto-resume feature" "0: Full/high speed,1: Low speed" bitfld.long 0x8 10. "AUTORESUME_ENDLY,Tuning the timing between dp/dm data and enable signal when auto-resume finish." "0,1" newline bitfld.long 0x8 9. "AUTORESUME_DATADLY,Please refer to the bitfield description for AUTORESUME_ENDLY." "0,1" bitfld.long 0x8 8. "AUTORESUME_EN,Enable auto-resume feature. When using phy_bypass signal this bit should be 1'b0." "0: Disable,1: Enable" newline bitfld.long 0x8 5. "OTG_CONN_WAKEUP_EN,Enable signal for wakeup from connection or disconnection only for super-speed." "0,1" bitfld.long 0x8 4. "OTG_VBUS_SOURCE_SEL,otg_vbus_source_sel" "0: Select vbus_valid,1: Select ssvld" newline bitfld.long 0x8 3. "OTG_U3_WAKE_EN,Enable signal for wake up from u3 state only for super-speed" "0: Disable,1: Enable" bitfld.long 0x8 2. "OTG_ID_WAKEUP_EN,Enable signal for wake up from id change" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "OTG_VBUS_WAKE_EN,Enable signal for wake up from vbus valid or session valid changes" "0: Disable,1: Enable" bitfld.long 0x8 0. "OTG_WKDPDMCHG_EN,Enable signal for wake up from dp/dm change" "0: Disable,1: Enable" rgroup.long 0xC++0x7 line.long 0x0 "USB1_WAKEUP_STATUS,USB1 Wakeup Status" bitfld.long 0x0 31. "OTG_WAKEUP_INTERRUPT,Same as WIR before it's OR of all wakeup interrupt then AND with otg_wakeup_enable." "0,1" bitfld.long 0x0 13. "OTG_CONN_WAKEUP_INTERRUPT,Interrupt status of connection" "0,1" newline bitfld.long 0x0 11.--12. "PIPE3_POWERDOWN,Pipe power-down" "0,1,2,3" bitfld.long 0x0 10. "OTG_HOST_MODE,USB drd mode indicator" "0,1" newline bitfld.long 0x0 9. "PIPE_RXELECIDLE,pipe_rxelecidel wakeup source" "0,1" bitfld.long 0x0 8. "OTG_PHY_OTGSESSVLD0,session valid wakeup source" "0,1" newline bitfld.long 0x0 7. "OTG_PHY_VBUSVALID0,vbus valid wakeup source" "0,1" bitfld.long 0x0 6. "OTG_PHY_IDDIG0,ID status wakeup source" "0,1" newline bitfld.long 0x0 5. "OTG_PHY_LINESTATE0_1,linestate[1] wakeup source" "0,1" bitfld.long 0x0 4. "OTG_PHY_LINESTATE0_0,linestate[0] wakeup source" "0,1" newline bitfld.long 0x0 3. "OTG_U3_WAKEUP_INTERRUP,Interrupt status of wakeup from u3 state" "0,1" bitfld.long 0x0 2. "OTG_ID_WAKEUP_INTERRUPT,Interrupt status of wakeup from id" "0,1" newline bitfld.long 0x0 1. "OTG_VBUS_SESSVLD_WAKEUP_INTERRUPT,Interrupt status of vbus or session valid signal. otg_vbus_wakeup_interrupt | otg_sessvld_wakeup_interrupt" "0,1" bitfld.long 0x0 0. "OTG_DP_DM_WAKEUP_INTERRUPT,Interrupt status of dm or dp otg_dp_wakeup_interrupt | otg_dm_wakeup_interrupt" "0,1" line.long 0x4 "USB2_WAKEUP_STATUS,USB2 Wakeup Status" bitfld.long 0x4 31. "OTG_WAKEUP_INTERRUPT,Same as WIR before it's OR of all wakeup interrupt then AND with otg_wakeup_enable." "0,1" bitfld.long 0x4 13. "OTG_CONN_WAKEUP_INTERRUPT,Interrupt status of connection" "0,1" newline bitfld.long 0x4 11.--12. "PIPE3_POWERDOWN,Pipe power-down" "0,1,2,3" bitfld.long 0x4 10. "OTG_HOST_MODE,USB drd mode indicator" "0: Device mode,1: Host mode" newline bitfld.long 0x4 9. "PIPE_RXELECIDLE,pipe_rxelecidel wakeup source" "0,1" bitfld.long 0x4 8. "OTG_PHY_OTGSESSVLD0,session valid wakeup source" "0,1" newline bitfld.long 0x4 7. "OTG_PHY_VBUSVALID0,vbus valid wakeup source" "0,1" bitfld.long 0x4 6. "OTG_PHY_IDDIG0,ID status wakeup source" "0,1" newline bitfld.long 0x4 5. "OTG_PHY_LINESTATE0_1,linestate[1] wakeup source" "0,1" bitfld.long 0x4 4. "OTG_PHY_LINESTATE0_0,linestate[0] wakeup source" "0,1" newline bitfld.long 0x4 3. "OTG_U3_WAKEUP_INTERRUP,Interrupt status of wakeup from u3 state" "0,1" bitfld.long 0x4 2. "OTG_ID_WAKEUP_INTERRUPT,Interrupt status of wakeup from id" "0,1" newline bitfld.long 0x4 1. "OTG_VBUS_SESSVLD_WAKEUP_INTERRUPT,Interrupt status of vbus or session valid signal. otg_vbus_wakeup_interrupt | otg_sessvld_wakeup_interrupt" "0,1" bitfld.long 0x4 0. "OTG_DP_DM_WAKEUP_INTERRUPT,Interrupt status of dm or dp otg_dp_wakeup_interrupt | otg_dm_wakeup_interrupt" "0,1" group.long 0x14++0x27 line.long 0x0 "PCIE1_DMA_XFER_GO_TOGG,PCIE1 DMA engine descriptor transfer go toggle register." bitfld.long 0x0 24.--26. "DMA_WDXFER_DONE_TOGG,DMA write engine descriptor transfer done toggle" "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "DMA_RDXFER_DONE_TOGG,DMA read engine descriptor transfer done toggle" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 8.--10. "DMA_WDXFER_GO_TOGG,DMA write engine descriptor transfer go toggle" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "DMA_RDXFER_GO_TOGG,DMA read engine descriptor transfer go toggle" "0,1,2,3,4,5,6,7" line.long 0x4 "PCIE2_DMA_XFER_GO_TOGG,PCIE2 DMA engine descriptor transfer go toggle register." bitfld.long 0x4 24.--26. "DMA_WDXFER_DONE_TOGG,DMA write engine descriptor transfer done toggle" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "DMA_RDXFER_DONE_TOGG,DMA read engine descriptor transfer done toggle" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 8.--10. "DMA_WDXFER_GO_TOGG,DMA write engine descriptor transfer go toggle" "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "DMA_RDXFER_GO_TOGG,DMA read engine descriptor transfer go toggle" "0,1,2,3,4,5,6,7" line.long 0x8 "USB1_AxQOS_DEFAULT,USB1 AXi master QoS programmable register" bitfld.long 0x8 8.--10. "AR_QOS_DEFAULT,Read channel Qos default value register" "0,1,2,3,4,5,6,7" bitfld.long 0x8 0.--2. "AW_QOS_DEFAULT,write channel Qos default value register" "0,1,2,3,4,5,6,7" line.long 0xC "USB1_AxQOS_PANIC,USB1 AXi master QoS (panic mode) programmable register" bitfld.long 0xC 8.--10. "AR_QOS_PANIC,Read channel Qos panic value register" "0,1,2,3,4,5,6,7" bitfld.long 0xC 0.--2. "AW_QOS_PANIC,write channel Qos panic value register" "0,1,2,3,4,5,6,7" line.long 0x10 "USB2_AxQOS_DEFAULT,USB2 AXi master QoS programmable register" bitfld.long 0x10 8.--10. "AR_QOS_DEFAULT,Read channel Qos default value register" "0,1,2,3,4,5,6,7" bitfld.long 0x10 0.--2. "AW_QOS_DEFAULT,write channel Qos default value register" "0,1,2,3,4,5,6,7" line.long 0x14 "USB2_AxQOS_PANIC,USB2 AXi master QoS (panic mode) programmable register" bitfld.long 0x14 8.--10. "AR_QOS_PANIC,Read channel Qos panic value register" "0,1,2,3,4,5,6,7" bitfld.long 0x14 0.--2. "AW_QOS_PANIC,write channel Qos panic value register" "0,1,2,3,4,5,6,7" line.long 0x18 "PCIE1_AxQOS_DEFAULT,PCIE1 AXi master QoS programmable register" bitfld.long 0x18 8.--10. "AR_QOS_DEFAULT,Read channel Qos default value register" "0,1,2,3,4,5,6,7" bitfld.long 0x18 0.--2. "AW_QOS_DEFAULT,write channel Qos default value register" "0,1,2,3,4,5,6,7" line.long 0x1C "PCIE1_AxQOS_PANIC,PCIE1 AXi master QoS (panic mode) programmable register" bitfld.long 0x1C 8.--10. "AR_QOS_PANIC,Read channel Qos panic value register" "0,1,2,3,4,5,6,7" bitfld.long 0x1C 0.--2. "AW_QOS_PANIC,write channel Qos panic value register" "0,1,2,3,4,5,6,7" line.long 0x20 "PCIE2_AxQOS_DEFAULT,PCIE2 AXi master QoS programmable register" bitfld.long 0x20 8.--10. "AR_QOS_DEFAULT,Read channel Qos default value register" "0,1,2,3,4,5,6,7" bitfld.long 0x20 0.--2. "AW_QOS_DEFAULT,write channel Qos default value register" "0,1,2,3,4,5,6,7" line.long 0x24 "PCIE2_AxQOS_PANIC,PCIE2 AXi master QoS (panic mode) programmable register" bitfld.long 0x24 8.--10. "AR_QOS_PANIC,Read channel Qos panic value register" "0,1,2,3,4,5,6,7" bitfld.long 0x24 0.--2. "AW_QOS_PANIC,write channel Qos panic value register" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "LFAST_IO_REG,GPR registers for LFAST IO" bitfld.long 0x0 14. "SWING_TEST_SEL,Lfast IO continuous 0/1 output for swing test" "0,1" bitfld.long 0x0 13. "TX_AURORA_MODE,Control bit to be set only if using Cref for Aurora protocol." "0,1" newline bitfld.long 0x0 11.--12. "TEST_MODE_SEL,Test mode control signal to expose internal signals on" "0,1,2,3" bitfld.long 0x0 10. "IREF_TX_OPT4,Control signal to adjust/boost transmitter current reference by 19% . Must be programmed through Fuse" "0,1" newline bitfld.long 0x0 9. "IREF_TX_OPT3,Control signal to adjust/boost transmitter current reference by 18% . Must be programmed through Fuse" "0,1" bitfld.long 0x0 8. "IREF_TX_OPT2,Control signal to adjust/boost transmitter current reference by 17% . Must be programmed through Fuse" "0,1" newline bitfld.long 0x0 7. "IREF_TX_OPT1,Control signal to adjust/boost transmitter current reference by 16% . Must be programmed through Fuse" "0,1" bitfld.long 0x0 6. "CREF_EN,Enable current reference control signal" "0,1" newline bitfld.long 0x0 5. "ESD_BOOST,ESD boost bus" "0,1" bitfld.long 0x0 4. "POWER_ON,Power ON indicator from Core_v_det cell. Must be 0 when dvdd is below functional limit." "0,1" newline bitfld.long 0x0 3. "TERM_EN,Enable internal 100ohm termination. Only use for test. Should be 0 for functional mode" "0,1" bitfld.long 0x0 2. "FUNC_OUPUT_EN,functional output transmitter enable" "0,1" newline rbitfld.long 0x0 1. "LOOPBACK_LV,Loopback data to the core side from transmitter output stage" "0,1" bitfld.long 0x0 0. "INT_LOOPBACK_EN,Enable signal for internal loopback testing for ATE" "0,1" rgroup.long 0x44++0x7 line.long 0x0 "PCIE1_REG,PCIe1 register" bitfld.long 0x0 0. "RADM_CPL_TIMEOUT,Indicates that the completion TLP for a request has not been received within the expected time window." "0,1" line.long 0x4 "PCIE2_REG,PCIe2 register" bitfld.long 0x4 0. "RADM_CPL_TIMEOUT,Indicates that the completion TLP for a request has not been received within the expected time window." "0,1" tree.end tree "HSIO_PCIE" base ad:0x0 tree "PCIE1" base ad:0x4C300000 group.long 0x0++0x23 line.long 0x0 "PCIE_PHY_GEN_CTRL,PCIe PHY General Control" bitfld.long 0x0 31. "PCS_RX0_CMN_REFCLK_MODE,RX common reference clock mode" "0: Disabled,1: Enabled" newline bitfld.long 0x0 30. "PCS_RX0_EB_EMPTY_MODE,Elastic buffer mode" "0: Nominal Half-Full Buffer mode,1: Hybrid Pipe Buffer Mode" newline bitfld.long 0x0 29. "PCS_RX0_RECAL_CONT_EN,Enable re-locking" "0: Disabled,1: Enabled" newline rbitfld.long 0x0 25. "PHY_RTUNE_STS,Resistor Tune Status" "0: Tuning has not started or completed,1: Tuning completed" newline bitfld.long 0x0 24. "PHY_RTUNE_REQ,Resistor Tune Request" "0: Driven to 0,1: Driven to 1" newline hexmask.long.byte 0x0 18.--23. 1. "PCS_RX0_IDLE_LOS_CNT,Control to disable the CDR" newline bitfld.long 0x0 17. "REF_USE_PAD,Reference Is From External Pad" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 16. "REF_REPEAT_CLK_EN,Repeat Reference Clock Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 15. "RX0_DIV16P5_CLK_EN,Enable signal for div 16.5 clock" "0: Disabled,1: Enabled" newline bitfld.long 0x0 14. "RX0_125MHZ_CLK_EN,Enable signal for 125MHz clock" "0: Disabled,1: Enabled" newline bitfld.long 0x0 10. "RX0_TERM_ACDC,Receiver Termination Control For Rx0" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 9. "RX_SRIS_MODE,SRIS Enable As Defined In PCIe ECN" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "CR_PARA_CLK_DIV2_EN,CR Parallel Clock Divider Control" "0: Same as PHY ref_dig_fr_clk,1: Half of ref_dig_fr_clk" newline bitfld.long 0x0 0. "EXT_PCLK_REQ,pipeP_pclk Required By External Logic" "0: Driven to 0,1: Driven to 1" line.long 0x4 "PCIE_PHY_LPBK_CTRL,PCIe PHY Loopback Control" bitfld.long 0x4 1. "LANE0_RX2TX_PAR_LB_EN,Lane0 Parallel (RX to TX) Loopback Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x4 0. "LANE0_TX2RX_LOOPBK,Lane0 Analog Serial Loopback Control" "0: Driven to 0,1: Driven to 1" line.long 0x8 "PCIE_PHY_SRAM_CSR,PCIe PHY SRAM Control And Status" rbitfld.long 0x8 6. "RX_ACK,Receiver acknowledge" "0: Request not completed,1: Request completed" newline rbitfld.long 0x8 4. "TX_ACK,Transmitter acknowledge" "0: Request not completed,1: Request completed" newline rbitfld.long 0x8 2. "SRAM_INIT_DONE,SRAM Initialization Done" "0: 0,1: 1" newline bitfld.long 0x8 1. "SRAM_EXT_LD_DONE,SRAM External Load Done" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x8 0. "SRAM_BYPASS,SRAM Bypass" "0: Disables SRAM Bypass,1: Enables SRAM Bypass" line.long 0xC "PCIE_PHY_PM_CTRL,PCIe PHY power management control" bitfld.long 0xC 4. "TX0_BEACON_EN_OVRD,TX0_BEACON override enable" "0,1" newline bitfld.long 0xC 0. "TX0_BEACON_EN,Transmitter beaconing/LFPS (low frequency period signaling) enable." "0,1" line.long 0x10 "PCIE_PHY_MPLLA_CTRL,PCIe PHY MPLLA Control" rbitfld.long 0x10 31. "MPLLA_STATE,MPLLA State Indicator" "0: 0,1: 1" newline rbitfld.long 0x10 30. "MPLL_STATE,MPLLA or MPLLB State Indicator" "0: phy0_mplla_state and phy0_mpllb_state are 0,1: phy0_mplla_state or phy0_mpllb_state is 1" newline bitfld.long 0x10 5. "MPLLA_INIT_CAL_DISABLE_OVRD,MPLLA calibration disable override" "0: Calibration Disable override disabled,1: Calibration disable override enabled" newline bitfld.long 0x10 4. "MPLLA_INIT_CAL_DISABLE,MPLLA calibration disable control" "0: Enabled MPLLA calibration,1: Disabled MPLLA calibration" newline rbitfld.long 0x10 2. "MPLLA_FORCE_ACK,MPLLA Force Acknowledge" "0,1" newline bitfld.long 0x10 0. "MPLLA_FORCE_EN,MPLLA Force Enable" "0: Driven to 0,1: Driven to 1" line.long 0x14 "PCIE_PHY_MPLLB_CTRL,PCIe PHY MPLLB Control" rbitfld.long 0x14 31. "MPLLB_STATE,MPLLB State Indicator" "0: 0,1: 1" newline rbitfld.long 0x14 30. "MPLL_STATE,MPLLA or MPLLB State Indicator" "0: phy0_mplla_state and phy0_mpllb_state are 0,1: phy0_mplla_state or phy0_mpllb_state is 1" newline bitfld.long 0x14 5. "MPLLB_INIT_CAL_DISABLE_OVRD,MPLLB calibration disable override" "0: Calibration Disable override disabled,1: Calibration disable override enabled" newline bitfld.long 0x14 4. "MPLLB_INIT_CAL_DISABLE,MPLLB calibration disable control" "0: Enabled MPLLB calibration,1: Disabled MPLLB calibration" newline rbitfld.long 0x14 2. "MPLLB_FORCE_ACK,MPLLB Force Acknowledge" "0,1" newline bitfld.long 0x14 0. "MPLLB_FORCE_EN,MPLLB Force Enable" "0: Driven to 0,1: Driven to 1" line.long 0x18 "PCIE_PHY_EXT_CTRL_SEL,PCIe PHY Setting External Control" bitfld.long 0x18 0. "EXT_PHY_CTRL_SEL,External Control Of PHY Setting" "0: Driven to 0,1: Driven to 1" line.long 0x1C "PCIE_PHY_EXT_BS_CTRL,PCIe PHY Boundary Scan Control" bitfld.long 0x1C 6. "EXT_BS_TX_LOWSWING,TX Boundary Scan Low Swing" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x1C 5. "EXT_BS_RX_BIGSWING,RX Boundary Scan Big Swing" "0: Driven to 0,1: Driven to 1" newline hexmask.long.byte 0x1C 0.--4. 1. "EXT_BS_RX_LEVEL,ACJTAG Receiver Sensitivity Level Control" line.long 0x20 "PCIE_PHY_REF_CLK_CTRL,PCIe Reference Clock Control" bitfld.long 0x20 3.--5. "REF_RANGE,Input Reference Clock frequency Range" "0,1,2,3,4,5,6,7" newline bitfld.long 0x20 2. "REF_CLK_DIV2_EN,Input Reference Clock Divider Control" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x20 1. "REF_CLK_MPLLB_DIV2_EN,MPLLB Reference Clock Divider Control" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x20 0. "REF_CLK_MPLLA_DIV2_EN,MPLLA Reference Clock Divider Control" "0: Driven to 0,1: Driven to 1" group.long 0x30++0xB line.long 0x0 "PCIE_PHY_EXT_MPLLA_CTRL_1,PCIe PHY MPLLA Control 1" hexmask.long.byte 0x0 24.--31. 1. "EXT_MPLLA_DIV_MULTIPLIER,MPLLA Output Frequency Multiplier Control" newline bitfld.long 0x0 19. "EXT_MPLLA_DIV_CLK_EN,MPLLA Divide Clock Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 18. "EXT_MPLLA_DIV8_CLK_EN,MPLLA Divide by 8 Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 17. "EXT_MPLLA_DIV16P5_CLK_EN,MPLLA Divide by 16.5 Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 16. "EXT_MPLLA_DIV10_CLK_EN,MPLLA Divide by 10 Enable" "0: Driven to 0,1: Driven to 1" newline hexmask.long.word 0x0 0.--15. 1. "EXT_MPLLA_BANDWIDTH,MPLLA Bandwidth Control" line.long 0x4 "PCIE_PHY_EXT_MPLLA_CTRL_2,PCIe PHY MPLLA Control 2" hexmask.long.word 0x4 12.--22. 1. "EXT_MPLLA_FRACN_CTRL,MPLLA Fractional Control" newline hexmask.long.byte 0x4 0.--7. 1. "EXT_MPLLA_MULTIPLIER,MPLLA Frequency Multiplier Control" line.long 0x8 "PCIE_PHY_EXT_MPLLA_CTRL_3,PCIe PHY MPLLA Control 3" bitfld.long 0x8 31. "EXT_MPLLA_WORD_DIV2_EN,MPLLA Word Clock Divide by 2" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x8 28.--30. "EXT_MPLLA_TX_CLK_DIV,MPLLA Tx Clock Divide" "0,1,2,3,4,5,6,7" group.long 0x40++0xB line.long 0x0 "PCIE_PHY_EXT_MPLLB_CTRL_1,PCIe PHY MPLLB Control 1" hexmask.long.byte 0x0 24.--31. 1. "EXT_MPLLB_DIV_MULTIPLIER,MPLLB Output Frequency Multiplier Control" newline bitfld.long 0x0 19. "EXT_MPLLB_DIV_CLK_EN,MPLLB Divide Clock Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 18. "EXT_MPLLB_DIV8_CLK_EN,MPLLB Divide by 8 Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 16. "EXT_MPLLB_DIV10_CLK_EN,MPLLB Divide by 10 Enable" "0: Driven to 0,1: Driven to 1" newline hexmask.long.word 0x0 0.--15. 1. "EXT_MPLLB_BANDWIDTH,MPLLB Bandwidth Control" line.long 0x4 "PCIE_PHY_EXT_MPLLB_CTRL_2,PCIe PHY MPLLB Control 2" hexmask.long.word 0x4 12.--22. 1. "EXT_MPLLB_FRACN_CTRL,MPLLB Fractional Control" newline hexmask.long.byte 0x4 0.--7. 1. "EXT_MPLLB_MULTIPLIER,MPLLB Frequency Multiplier Control" line.long 0x8 "PCIE_PHY_EXT_MPLLB_CTRL_3,PCIe PHY MPLLB Control 3" bitfld.long 0x8 31. "EXT_MPLLB_WORD_DIV2_EN,MPLLB Word Clock Divide by 2" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x8 28.--30. "EXT_MPLLB_TX_CLK_DIV,MPLLB Tx Clock Divide" "0,1,2,3,4,5,6,7" group.long 0x50++0xB line.long 0x0 "PCIE_PHY_EXT_RX_EQ_CTRL_1A,PCIe PHY RX Equalization Control 1 For Gen1 Speed" hexmask.long.byte 0x0 25.--28. 1. "EXT_RX_EQ_CTLE_POLE_G1,RX Equalization CTLE Pole" newline hexmask.long.byte 0x0 16.--20. 1. "EXT_RX_EQ_CTLE_BOOST_G1,RX Equalization CTLE Boost" newline bitfld.long 0x0 4.--6. "EXT_RX_EQ_ATT_LVL_G1,RX Equalization Attenuation Level" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2. "EXT_RX_ADAPT_DFE_EN_G1,RX DFE Enable" "0,1" newline bitfld.long 0x0 0. "EXT_RX_ADAPT_AFE_EN_G1,RX Adaptation Enable" "0,1" line.long 0x4 "PCIE_PHY_EXT_RX_EQ_CTRL_1B,PCIe PHY RX Equalization Control 2 For Gen1 Speed" hexmask.long.byte 0x4 24.--31. 1. "EXT_RX_EQ_VGA2_GAIN_G1,RX Equalization VGA Gain 2" newline hexmask.long.byte 0x4 16.--23. 1. "EXT_RX_EQ_VGA1_GAIN_G1,RX Equalization VGA Gain 1" newline hexmask.long.word 0x4 0.--15. 1. "EXT_RX_EQ_DFE_TAP1_G1,RX Equalization DFE Tap1" line.long 0x8 "PCIE_PHY_EXT_RX_EQ_CTRL_1C,PCIe PHY RX Equalization Control 3 For Gen1 Speed" hexmask.long.byte 0x8 0.--7. 1. "EXT_RX_EQ_DELTA_IQ_G1,RX Equalization DELTA IQ" group.long 0x60++0xB line.long 0x0 "PCIE_PHY_EXT_RX_EQ_CTRL_2A,PCIe PHY RX Equalization Control 1 For Gen2 Speed" hexmask.long.byte 0x0 26.--31. 1. "EXT_RX_EQ_CTLE_POLE_G2,RX Equalization CTLE Pole" newline hexmask.long.word 0x0 16.--25. 1. "EXT_RX_EQ_CTLE_BOOST_G2,RX Equalization CTLE Boost" newline hexmask.long.byte 0x0 4.--9. 1. "EXT_RX_EQ_ATT_LVL_G2,RX Equalization Attenuation Level" newline bitfld.long 0x0 2.--3. "EXT_RX_ADAPT_DFE_EN_G2,RX DFE Enable" "0,1,2,3" newline bitfld.long 0x0 0.--1. "EXT_RX_ADAPT_AFE_EN_G2,RX Adaptation Enable" "0,1,2,3" line.long 0x4 "PCIE_PHY_EXT_RX_EQ_CTRL_2B,PCIe PHY RX Equalization Control 2 For Gen2 Speed" hexmask.long.byte 0x4 24.--31. 1. "EXT_RX_EQ_VGA2_GAIN_G2,RX Equalization VGA Gain 2" newline hexmask.long.byte 0x4 16.--23. 1. "EXT_RX_EQ_VGA1_GAIN_G2,RX Equalization VGA Gain 1" newline hexmask.long.word 0x4 0.--15. 1. "EXT_RX_EQ_DFE_TAP1_G2,RX Equalization DFE Tap1" line.long 0x8 "PCIE_PHY_EXT_RX_EQ_CTRL_2C,PCIe PHY RX Equalization Control 3 For Gen2 Speed" hexmask.long.byte 0x8 0.--7. 1. "EXT_RX_EQ_DELTA_IQ_G2,RX Equalization DELTA IQ" group.long 0x70++0xB line.long 0x0 "PCIE_PHY_EXT_RX_EQ_CTRL_3A,PCIe PHY RX Equalization Control 1 For Gen3 Speed" hexmask.long.byte 0x0 26.--31. 1. "EXT_RX_EQ_CTLE_POLE_G3,RX Equalization CTLE Pole" newline hexmask.long.word 0x0 16.--25. 1. "EXT_RX_EQ_CTLE_BOOST_G3,RX Equalization CTLE Boost" newline hexmask.long.byte 0x0 4.--9. 1. "EXT_RX_EQ_ATT_LVL_G3,RX Equalization Attenuation Level" newline bitfld.long 0x0 2.--3. "EXT_RX_ADAPT_DFE_EN_G3,RX DFE Enable" "0,1,2,3" newline bitfld.long 0x0 0.--1. "EXT_RX_ADAPT_AFE_EN_G3,RX Adaptation Enable" "0,1,2,3" line.long 0x4 "PCIE_PHY_EXT_RX_EQ_CTRL_3B,PCIe PHY RX Equalization Control 2 For Gen3 Speed" hexmask.long.byte 0x4 24.--31. 1. "EXT_RX_EQ_VGA2_GAIN_G3,RX Equalization VGA Gain 2" newline hexmask.long.byte 0x4 16.--23. 1. "EXT_RX_EQ_VGA1_GAIN_G3,RX Equalization VGA Gain 1" newline hexmask.long.word 0x4 0.--15. 1. "EXT_RX_EQ_DFE_TAP1_G3,RX Equalization DFE Tap1" line.long 0x8 "PCIE_PHY_EXT_RX_EQ_CTRL_3C,PCIe PHY RX Equalization Control 3 For Gen3 Speed" hexmask.long.byte 0x8 0.--7. 1. "EXT_RX_EQ_DELTA_IQ_G3,RX Equalization DELTA IQ" group.long 0x90++0xB line.long 0x0 "PCIE_PHY_EXT_CALI_CTRL_1,PCIe PHY Calibration Control For Gen1 Speed" bitfld.long 0x0 31. "PROTOCOL0_EXT_RX_CDR_VCO_LOWFREQ_G1,Overrides settings for receiver vco" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "EXT_RX_REF_LD_VAL_G1,RX VCO Calibration Reference Load Value" newline hexmask.long.word 0x0 0.--12. 1. "EXT_RX_VCO_LD_VAL_G1,RX VCO Calibration Load Value" line.long 0x4 "PCIE_PHY_EXT_CALI_CTRL_2,PCIe PHY Calibration Control For Gen2 Speed" bitfld.long 0x4 31. "PROTOCOL0_EXT_RX_CDR_VCO_LOWFREQ_G2,Overrides settings for receiver vco" "0,1" newline hexmask.long.byte 0x4 16.--21. 1. "EXT_RX_REF_LD_VAL_G2,RX VCO Calibration Reference Load Value" newline hexmask.long.word 0x4 0.--12. 1. "EXT_RX_VCO_LD_VAL_G2,RX VCO Calibration Load Value" line.long 0x8 "PCIE_PHY_EXT_CALI_CTRL_3,PCIe PHY Calibration Control For Gen3 Speed" bitfld.long 0x8 31. "PROTOCOL0_EXT_RX_CDR_VCO_LOWFREQ_G3,Overrides settings for receiver vco" "0,1" newline hexmask.long.byte 0x8 16.--21. 1. "EXT_RX_REF_LD_VAL_G3,RX VCO Calibration Reference Load Value" newline hexmask.long.word 0x8 0.--12. 1. "EXT_RX_VCO_LD_VAL_G3,RX VCO Calibration Load Value" group.long 0xA0++0x7 line.long 0x0 "PCIE_PHY_EXT_MISC_CTRL_1,PCIe PHY Miscellaneous Control 1" bitfld.long 0x0 29.--31. "EXT_RX_TERM_CTRL,RX Term Control" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 24.--28. 1. "EXT_RX_VREF_CTRL,RX Biasing Current Control" newline bitfld.long 0x0 1.--3. "EXT_RX_LOS_THRESHOLD,Receiver LOS Threshold" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "EXT_RX_LOS_LFPS_EN,Receiver LOS LFPS Enable" "0: Driven to 0,1: Driven to 1" line.long 0x4 "PCIE_PHY_EXT_MISC_CTRL_2,PCIe PHY Miscellaneous Control 2" bitfld.long 0x4 31. "PROTOCOL0_EXT_TX_VBOOST_EN,Transmitter voltage boost enable" "0: Disabled,1: Enabled" newline bitfld.long 0x4 24.--26. "EXT_TX_TERM_CTRL,Tx Term Control" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 16.--18. "EXT_TX_VBOOST_LVL,TX Voltage Boost Maximum Level" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 0.--3. 1. "EXT_TX_IBOOST_LVL,Transmitter Current Boost Level" group.long 0xB0++0xB line.long 0x0 "PCIE_PHY_EXT_TX_EQ_CTRL_1,PCIe PHY TX Equalization Control For Gen1 Speed" bitfld.long 0x0 28. "EXT_TX_EQ_OVRD_G1,TX Equalization Override Enable" "0,1" newline hexmask.long.byte 0x0 16.--20. 1. "EXT_TX_EQ_MAIN_G1,TX Equalization Amplitude Adjustment Control" newline hexmask.long.byte 0x0 8.--11. 1. "EXT_TX_EQ_PRE_G1,TX Equalization Pre-Emphasis Level Adjustment Control" newline hexmask.long.byte 0x0 0.--3. 1. "EXT_TX_EQ_POST_G1,TX Equalization Post-Emphasis Level Adjustment Control" line.long 0x4 "PCIE_PHY_EXT_TX_EQ_CTRL_2,PCIe PHY TX Equalization Control For Gen2 Speed" bitfld.long 0x4 28.--29. "EXT_TX_EQ_OVRD_G2,TX Equalization Override Enable" "0,1,2,3" newline hexmask.long.byte 0x4 16.--20. 1. "EXT_TX_EQ_MAIN_G2,TX Equalization Amplitude Adjustment Control" newline hexmask.long.byte 0x4 8.--11. 1. "EXT_TX_EQ_PRE_G2,TX Equalization Pre-Emphasis Level Adjustment Control" newline hexmask.long.byte 0x4 0.--3. 1. "EXT_TX_EQ_POST_G2,TX Equalization Post-Emphasis Level Adjustment Control" line.long 0x8 "PCIE_PHY_EXT_TX_EQ_CTRL_3,PCIe PHY TX Equalization Control For Gen3 Speed" bitfld.long 0x8 28.--29. "EXT_TX_EQ_OVRD_G3,TX Equalization Override Enable" "0,1,2,3" newline hexmask.long.byte 0x8 16.--20. 1. "EXT_TX_EQ_MAIN_G3,TX Equalization Amplitude Adjustment Control" newline hexmask.long.byte 0x8 8.--11. 1. "EXT_TX_EQ_PRE_G3,TX Equalization Pre-Emphasis Level Adjustment Control" newline hexmask.long.byte 0x8 0.--3. 1. "EXT_TX_EQ_POST_G3,TX Equalization Post-Emphasis Level Adjustment Control" rgroup.long 0xE0++0xF line.long 0x0 "SS_RO_REG_0,Subsystem Read-Only Register 0" hexmask.long.byte 0x0 26.--31. 1. "MSTR_ARMISC_INFO_DMA,DMA Bits Of The AXI Read Master Transaction" newline bitfld.long 0x0 19. "CDM_REG_CHK_CMPLT,Register Checking Complete" "0: Not completed,1: Completed" newline bitfld.long 0x0 18. "CDM_REG_CHK_CMP_ERR,CDM Comparison Error" "0: The values are not matched.,1: The values are matched." newline bitfld.long 0x0 17. "CDM_REG_CHK_LOGIC_ERR,Error In Register-Checking Logic" "0: No error,1: Error" newline hexmask.long.byte 0x0 5.--12. 1. "MSI_CTRL_INT_VEC,DSP AXI MSI Interrupt Vector" newline bitfld.long 0x0 4. "MSTR_ARMISC_INFO_LAST_DCMP_TLP,Last TLP Of The PCIe Controller's AXI Master Read Request" "0: The TLP in the transaction is not the last TLP..,1: The TLP in the transaction is the last TLP of.." newline bitfld.long 0x0 3. "MSTR_AWMISC_INFO_LAST_DCMP_TLP,Last TLP Of The PCIe controller's AXI Master Write Request" "0: The TLP in the transaction is not the last TLP..,1: The TLP in the transaction is the last TLP of.." newline bitfld.long 0x0 2. "PHY_RX1_LOS,Receive Loss Of Signal (LOS) Output 1" "0: The receiver has not lost the signal.,1: The receiver has lost the signal." newline bitfld.long 0x0 1. "PHY_RX0_LOS,Receive Loss Of Signal (LOS) Output 0" "0: The receiver has not lost the signal.,1: The receiver has lost the signal." line.long 0x4 "SS_RO_REG_1,Subsystem Read-Only Register 1" hexmask.long.word 0x4 17.--27. 1. "SLV_RMISC_INFO,Miscellaneous Read Information" newline hexmask.long.word 0x4 6.--16. 1. "SLV_BMISC_INFO,Miscellaneous Write Information" newline hexmask.long.byte 0x4 0.--5. 1. "MSTR_AWMISC_INFO_DMA,DMA Bits Of The AXI Write Master Transaction" line.long 0x8 "SS_RO_REG_2,Subsystem Read-Only Register 2" hexmask.long 0x8 0.--31. 1. "REG2,Subsystem Read Only Register 2" line.long 0xC "SS_RO_REG_3,Subsystem Read-Only Register 3" hexmask.long 0xC 0.--31. 1. "REG3,Subsystem Read Only Register 3" group.long 0xF0++0x17 line.long 0x0 "SS_RW_REG_0,Subsystem Read/Write Register 0" bitfld.long 0x0 31. "MSTR_RMISC_INFO,Miscellaneous Information Related To AXI Master Read-Response Transactions" "0: The controller operates normally.,1: The controller sets the Poisoned TLP (EP) bit in.." newline bitfld.long 0x0 30. "MDR,Memory Data Retention" "0: The subsystem retains data stored in memory and..,1: The subsystem does not retain data stored in.." newline bitfld.long 0x0 29. "PHY_TEST_TX_REF_CLK_EN,TX Reference Clock Output Enable" "0: Normal functional operation,1: The reference clock inputs (ref_pad_clk_{p m} or.." newline bitfld.long 0x0 27. "PHY_TEST_POWERDOWN,All Circuits Power-Down Control" "0: The PHY circuitry operates normally.,1: The PHY deactivates all its circuitry for IDDQ.." newline bitfld.long 0x0 25. "SLV_AWMISC_INFO_ATU_BYPASS,AXI Slave Write Request iATU Bypass" "0: The iATU must process this request.,1: The iATU must not process this request." newline bitfld.long 0x0 24. "SLV_ARMISC_INFO_ATU_BYPASS,AXI Slave Read Request iATU Bypass" "0: The iATU must process this request.,1: The iATU must not process this request." newline bitfld.long 0x0 23. "CLKEN,PCIe Reference Clock Enable" "0: External clock (phy0_ref_pad_clk_m..,1: Internal clock (PCIE_REF_CLK) is the reference.." newline hexmask.long.byte 0x0 15.--22. 1. "SLV_AWMISC_INFO_P_TAG,AXI Slave Write Request Tag" newline bitfld.long 0x0 14. "SLV_WMISC_INFO,Miscellaneous Information Related To AXI Slave Write-Data Transactions" "0: The controller operates normally.,1: The controller sets the Poisoned TLP (EP) bit in.." newline bitfld.long 0x0 12.--13. "MSTR_RMISC_INFO_CPL_STAT,AXI Master Read Response Selection Bus" "0: Successful completion,1: Completer abort,2: Unsupported request,3: Successful completion" newline bitfld.long 0x0 10.--11. "MSTR_BMISC_INFO_CPL_STAT,AXI Master Write Response Selection Bus" "0: Successful completion,1: Completer abort,2: Unsupported request,3: Successful completion" newline bitfld.long 0x0 9. "PHY0_CR_PARA_SEL,Control Register (CR) Parallel Interface Select" "0: Select the JTAG interface.,1: Select the CR interface." newline bitfld.long 0x0 7. "APP_XFER_PENDING,Application Transfer Pending" "0: No transactions exist outside the core,1: Transactions exist outside the core and the core.." newline bitfld.long 0x0 6. "SYS_INT,System Interrupt" "0,1" newline bitfld.long 0x0 5. "SYS_EML_INTERLOCK_ENGAGED,System Electromechanical Interlock Engaged" "0: Electromechanical interlock is not engaged,1: Electromechanical interlock is engaged" newline bitfld.long 0x0 4. "SYS_CMD_CPLED_INT,Command Completed Interrupt" "0: Command not completed,1: Command completed" newline bitfld.long 0x0 3. "SYS_ATTEN_BUTTON_PRESSED,Attention Button Pressed" "0,1" newline bitfld.long 0x0 0.--2. "SUBSYS_MODE,Subsystem Mode Selection" "0,1,2,3,4,5,6,7" line.long 0x4 "SS_RW_REG_1,Subsystem Read/Write Register 1" bitfld.long 0x4 7. "PARITY_MODE_SLV_RD_DATA,Parity Error Injection In AXI Slave Read Data Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 6. "PARITY_MODE_MSTR_WR_DATA,Parity Error Injection In AXI Master Write Data Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 5. "PARITY_MODE_MSTR_WR_ADDR,Parity Error Injection In AXI Master Write Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 4. "PARITY_MODE_MSTR_RD_ADDR,Parity Error Injection In AXI Master Read Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 3. "PARITY_MODE_SLV_WR_DATA,Parity Error Injection In AXI Slave Write Data Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 2. "PARITY_MODE_SLV_WR_ADDR,Parity Error Injection In AXI Slave Write Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 1. "PARITY_MODE_SLV_RD_ADDR,Parity Error Injection In AXI Slave Read Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 0. "PARITY_MODE_MSTR_RD_DATA,Parity Error Injection In AXI Master Read Data Bus" "0: No error injected,1: Error injected" line.long 0x8 "SS_RW_REG_2,Subsystem Read/Write Register 2" hexmask.long.tbyte 0x8 0.--21. 1. "SLV_ARMISC_INFO,Miscellaneous Information Associated With The AXI Slave Read Transaction" line.long 0xC "SS_RW_REG_3,Subsystem Read/Write Register 3" hexmask.long.tbyte 0xC 0.--21. 1. "SLV_AWMISC_INFO,Miscellaneous Information Associated With The AXI Slave Write Transaction" line.long 0x10 "SS_RW_REG_4,Subsystem Read/Write Register 4" hexmask.long 0x10 0.--31. 1. "SLV_AWMISC_INFO_HDR_3DW,AXI Slave Third Header DWs" line.long 0x14 "SS_RW_REG_5,Subsystem Read/Write Register 5" hexmask.long 0x14 0.--31. 1. "SLV_AWMISC_INFO_HDR_4DW,AXI Slave Fourth Header DWs" rgroup.long 0x1000++0x3 line.long 0x0 "PCIE_SUBSYSTEM_VERSION,PCIe Subsystem Version" hexmask.long 0x0 0.--31. 1. "VERSION,PCIe Subsystem Version" group.long 0x1004++0x17 line.long 0x0 "PE0_CLKREQ_CTRL,PCIe Controller Clock Request Override" bitfld.long 0x0 1. "SW_CLK_REQ,Software override for clkreq input of pcie controller." "0,1" newline bitfld.long 0x0 0. "CLKREQ_OVER,CLKREQ override" "0: CLKREQ is driven by system,1: CLKREQ is driven by software" line.long 0x4 "PE0_LUT_ACSCTRL,LUT access Control" bitfld.long 0x4 16. "RWA,LUT Entry Read/Write access control" "0: Write into RBP_LUT entry specified in ENTRY_LOC..,1: Read from the RBP_LUT entry specified in.." newline hexmask.long.byte 0x4 0.--4. 1. "ENLOC,LUT Entry location to be accessed" line.long 0x8 "PE0_LUT_DATA1,LUT Data1 register" bitfld.long 0x8 31. "VLD,LUT Entry is valid for matching" "0: Disable,1: Enable" newline bitfld.long 0x8 8.--10. "DAC_ID,DAC Index" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 0.--5. 1. "STREAM_ID,VFID of VF at the target port corresponding to REQID" line.long 0xC "PE0_LUT_DATA2,LUT Data2 register" hexmask.long.word 0xC 16.--31. 1. "REQID,REQID value to matched with master port RID (in RC mode) and {BAR# PF# VFA VF# } (in EP mode)" newline hexmask.long.word 0xC 0.--15. 1. "MASK,Mask to be used for matching with REQID field" line.long 0x10 "PE0_LUT_INT_STS,LUT Interrupt Status" eventfld.long 0x10 31. "LUTWMS,LUT Write Request Miss Status" "0,1" newline eventfld.long 0x10 30. "LUTRMS,LUT Read Request Miss Status" "0,1" line.long 0x14 "PE0_LUT_INT_CTRL,LUT Interrupt Control" bitfld.long 0x14 31. "LUTWMIE,LUT Write request Miss Interrupt Enable" "0: Interrupt Disable,1: Interrupt Enable" newline bitfld.long 0x14 30. "LUTRMIE,LUT Read request Miss Interrupt Enable" "0: Interrupt Disable,1: Interrupt Enable" newline bitfld.long 0x14 0. "DEFAULT_MATCH_ERR_EN,Default entry match error reporting enable" "0: Disabled no error reporting on default match.,1: Error reported on default entry match." rgroup.long 0x101C++0x3 line.long 0x0 "PE0_LUT_CREQID,LUT Request ID Register" hexmask.long.word 0x0 16.--31. 1. "CREQID_WR,Captured Write Requester ID Field" newline hexmask.long.word 0x0 0.--15. 1. "CREQID_RD,Captured Read Requester ID Field" group.long 0x1020++0x3 line.long 0x0 "FLR_CTRL_STS,Function Level Reset (FLR) Control and Status Register" bitfld.long 0x0 31. "FLRDNBYP,Bypass SW wait for FLR DONE confirmation" "0: NOT BYPASSED,1: BYPASSED" newline rbitfld.long 0x0 0. "FLRIS,Indicates the FLR request ." "0: No FLR request pending,1: FLR request arrived approval pending." group.long 0x1040++0x3 line.long 0x0 "LINK_INT_CTRL_STS,Link Interrupt Control And Status" eventfld.long 0x0 11. "RDLH_LINK_DOWN_INT_STS,RDLH Link down event interrupt status" "0: No interrupt pending,1: Interrupt is pending" newline bitfld.long 0x0 10. "RDLH_LINK_DOWN_INT_EN,Interrupt enable for RDLH Link down event" "0: Interrupt disable,1: Interrupt enable" newline eventfld.long 0x0 9. "RDLH_LINK_UP_INT_STS,RDLH Link up event interrupt status" "0: No interrupt pending,1: Interrupt is pending" newline bitfld.long 0x0 8. "RDLH_LINK_UP_INT_EN,Interrupt enable for RDLH Link up event" "0: Interrupt disable,1: Interrupt enable" newline rbitfld.long 0x0 6. "LTSSM_STATE_RCVRY_EQ,Recovery Equalization State Status" "0: Not in Recovery Equalization state,1: In Recovery Equalization state" newline bitfld.long 0x0 5. "PHY_LINK_UP_INT_EN,PHY Link Up Interrupt Enable Control" "0: Disable,1: Enable" newline bitfld.long 0x0 4. "PHY_LINK_DOWN_INT_EN,PHY Link Down Interrupt Enable Control" "0: Disable,1: Enable" newline bitfld.long 0x0 2. "LINK_REQ_RST_NOT_CLR,Clear Link Request Reset Status" "0: Do not change LINK_REQ_RST_NOT_STS,1: Change LINK_REQ_RST_NOT_STS to 0" newline bitfld.long 0x0 1. "LINK_REQ_RST_NOT_INT_EN,Link Request Reset Interrupt Enable Control" "0: Disable,1: Enable" newline rbitfld.long 0x0 0. "LINK_REQ_RST_NOT_STS,Link Request Reset Status" "0: Not set,1: Set" group.long 0x1050++0x13 line.long 0x0 "PE0_GEN_CTRL_1,PCIe Controller 0 General Control 1" bitfld.long 0x0 12. "ECAM_BUS_ERR_CTRL,Return error on system bus for invalid ECAM accesses from system" "0: Do not return error,1: Return error" newline bitfld.long 0x0 8. "SRIS_MODE,SRIS Operation Mode" "0: Non-SRIS,1: SRIS" newline hexmask.long.byte 0x0 0.--3. 1. "DEVICE_TYPE,Device Type" line.long 0x4 "PE0_GEN_CTRL_2,PCIe Controller 0 General Control 2" bitfld.long 0x4 29. "FLRIE,Interrupt enable for FLR request PE0_ERR_STS[FLRIN_STS]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 24. "PM_LINKST_ENTR_L1SUB_INT_EN,Interrupt enable for PM_LINKST_ENTR_L1SUB_STS" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 11. "LTR_MSG_RCVD_INT_EN,Interrupt enable for LTR_MSG_RCVD" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 10. "MSI_INT_CTRL,MSI interrupt mapping Control" "0: Interrupt is mapped to pcie0_msi_ctrl_int,1: Interrupt is mapped to INTA interrupt" newline bitfld.long 0x4 9. "SLV_ACLK_UNGATE,AXI Slave Clock Gating Control" "0: Gate,1: Do not gate" newline bitfld.long 0x4 8. "MSTR_ACLK_UNGATE,AXI Master Clock Gating Control" "0: Gate,1: Do not gate" newline bitfld.long 0x4 5. "CFG_LINK_EQ_REQ_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[LINK_EQ_REQ_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 4. "CFG_BW_MGT_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[BW_MGT_MSI_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 3. "CFG_LINK_AUTO_BW_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[LINK_AUTO_BW_MSI_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 2. "HP_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[HP_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 1. "CFG_PME_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[PME_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 0. "CFG_AER_RC_ERR_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[AER_RC_ERR_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" line.long 0x8 "PE0_GEN_CTRL_3,PCIe Controller 0 General Control 3" bitfld.long 0x8 13.--15. "DIAG_CTRL_BUS,Diagnostic Control Bus" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 2. "HOT_RESET,Hot Reset" "?,1: Trigger a hot reset" newline bitfld.long 0x8 1. "CRS_EN,Configuration Request Retry Status (CRS) Enable" "0: PCIe controller does not complete incoming..,1: PCIe controller completes incoming configuration.." newline bitfld.long 0x8 0. "LTSSM_EN,LTSSM Enable" "0: Hold LTSSM in the Detect state until your..,1: Allow LTSSM to continue link establishment and.." line.long 0xC "PE0_GEN_CTRL_4,PCIe Controller 0 General Control 4" bitfld.long 0xC 31. "CRS_EN_CLR_MASK,CRS_EN Clear Mask" "0: CRS_EN does not change,1: CRS_EN goes to its reset value" newline bitfld.long 0xC 30. "LTSSM_EN_CLR_MASK,LTSSM_EN Clear Mask" "0: LTSSM_EN does not change,1: LTSSM_EN goes to its reset value" line.long 0x10 "PE0_PM_CTRL,PCIe Controller 0 PM Control" bitfld.long 0x10 31. "BEACON_INT_EN,Beacon Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 21. "APP_CLK_PM_EN,Clock PM Feature Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 20. "APP_CLK_REQ,Wake Up Reference Clock" "0: No request to wake up,1: Explicit request to wake up" newline bitfld.long 0x10 19. "READY_ENTER_L23,Ready To Enter L23" "0: Not ready,1: Ready" newline bitfld.long 0x10 18. "EXIT_ASPM_L1,Request To Exit ASPM State L1" "0: No request to exit,1: Explicit request to exit" newline bitfld.long 0x10 17. "ENTER_ASPM_L1,Request To Enter ASPM State L1" "0: No request to enter,1: Explicit request to enter" newline bitfld.long 0x10 16. "PM_PME_REQ,PM_PME Message Request" "0,1" newline bitfld.long 0x10 7. "APP_L1SUB_DISABLE,Disable L1 sub-states entry" "0: Entry to L1 sub-states is not gated,1: Entry to L1 sub-states is gated" newline hexmask.long.byte 0x10 0.--4. 1. "PME_PF_INDEX,PF Index Of PM_PME Request And PM Status" rgroup.long 0x1064++0x3 line.long 0x0 "PE0_PM_STS,PCIe Controller 0 PM Status" hexmask.long.byte 0x0 25.--29. 1. "PM_SLAVE_STATE,Power management slave FSM state" newline hexmask.long.byte 0x0 20.--24. 1. "PM_MASTER_STATE,Power management master FSM state" newline bitfld.long 0x0 16. "PM_LINKST_IN_L1SUB_STS,Power management is in L1 substate" "0,1" newline bitfld.long 0x0 15. "PM_LINKST_L2_EXIT,Power Management is Exiting L2 State" "0: Not in L2 exit,1: In L2 exit" newline bitfld.long 0x0 14. "PM_LINKST_IN_L2,Power Management in L2 State" "0: Not in L2,1: In L2" newline bitfld.long 0x0 13. "PM_ASPM_L1_ENTR_RDY,Power Management L1 Entry Ready" "0,1" newline bitfld.long 0x0 12. "PM_LINKST_IN_L1,Power Management In L1 State" "0: Not in L1,1: In L1" newline bitfld.long 0x0 11. "PM_LINKST_IN_L0S,Power Management In L0s State" "0: Not in L0s,1: In L0s" newline bitfld.long 0x0 8.--10. "PM_CURNT_STATE,PM Controller's Current Power State" "0: L0 and others,1: L0S,2: L1,3: L2,4: L3,?,?,?" newline bitfld.long 0x0 5.--7. "L1_SUBSTATE_FSM,Power management L1 sub-states FSM state" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4. "PM_STATUS,PME Status Mirror" "0,1" newline bitfld.long 0x0 3. "PM_PME_EN,PME Enable Mirror" "0,1" newline bitfld.long 0x0 0.--2. "PM_DSTATE,Current Power Management D-State" "0: D0,1: D1,2: D2,3: D3,4: Uninitialized,?,?,?" group.long 0x1068++0x1B line.long 0x0 "PE0_TX_LTR_MSG_LATENCY,PCIe Controller LTR message latency" hexmask.long 0x0 0.--31. 1. "LTR_MSG_LATENCY,LTR message to be sent." line.long 0x4 "PE0_TX_LTR_MSG_FUNC_NUM,Function number that is requesting to send an LTR message." bitfld.long 0x4 0.--2. "LTR_MSG_FUNC_NUM,Function number that is requesting to send an LTR message. Function numbering starts at '0'." "0,1,2,3,4,5,6,7" line.long 0x8 "PE0_TX_MSG_HDR_1,PCIe Controller 0 Transmit Message Header 1" bitfld.long 0x8 29.--30. "MSG_HDR_FM,Format Field" "0,1,2,3" newline hexmask.long.byte 0x8 24.--28. 1. "MSG_HDR_TYPE,Type Field" newline bitfld.long 0x8 20.--22. "MSG_HDR_TC,Traffic Class" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 15. "MSG_HDR_TD,TLP Digest (TD)" "0,1" newline bitfld.long 0x8 14. "MSG_HDR_EP,Poisoned TLP (EP)" "0,1" newline bitfld.long 0x8 12.--13. "MSG_HDR_ATTR,Attribute[1:0] Relaxing Ordering and No Snoop" "0,1,2,3" newline hexmask.long.word 0x8 0.--9. 1. "MSG_HDR_LENGTH,Tied to 0." line.long 0xC "PE0_TX_MSG_HDR_2,PCIe Controller 0 Transmit Message Header 2" hexmask.long.byte 0xC 24.--31. 1. "MSG_HDR_BYTE4,Requester ID[15:8] Byte 4" newline hexmask.long.byte 0xC 16.--23. 1. "MSG_HDR_BYTE5,Requester ID[7:0] Byte 5" newline hexmask.long.byte 0xC 8.--15. 1. "MSG_HDR_BYTE6,Message Tag Byte 6" newline hexmask.long.byte 0xC 0.--7. 1. "MSG_HDR_BYTE7,Message Code Byte 7" line.long 0x10 "PE0_TX_MSG_HDR_3,PCIe Controller 0 Transmit Message Header 3" hexmask.long.byte 0x10 24.--31. 1. "MSG_HDR_BYTE8,Byte 8" newline hexmask.long.byte 0x10 16.--23. 1. "MSG_HDR_BYTE9,Byte 9" newline hexmask.long.byte 0x10 8.--15. 1. "MSG_HDR_BYTE10,Byte 10" newline hexmask.long.byte 0x10 0.--7. 1. "MSG_HDR_BYTE11,Byte 11" line.long 0x14 "PE0_TX_MSG_HDR_4,PCIe controller 0 transmit message header 4" hexmask.long.byte 0x14 24.--31. 1. "MSG_HDR_BYTE12,Byte 12" newline hexmask.long.byte 0x14 16.--23. 1. "MSG_HDR_BYTE13,Byte 13" newline hexmask.long.byte 0x14 8.--15. 1. "MSG_HDR_BYTE14,Byte 14" newline hexmask.long.byte 0x14 0.--7. 1. "MSG_HDR_BYTE15,Byte 15" line.long 0x18 "PE0_TX_MSG_REQ,PCIe Controller 0 Transmit Message Request" bitfld.long 0x18 20. "UNLOCK_REQ,Unlock message" "0,1" newline bitfld.long 0x18 19. "PME_TURN_OFF_REQ,PME_Turn_Off Message Request" "0,1" newline bitfld.long 0x18 17. "VEN_MSG_REQ,Vendor-Defined Message Request" "0: Normal operation,1: Trigger a vendor-defined message request" newline bitfld.long 0x18 16. "LTR_MSG_REQ,Request to send an LTR message" "0: LTR message request is not pending,1: Send LTR message" rgroup.long 0x1084++0x7 line.long 0x0 "PE0_RX_SLOT_PWR_PAYLD,DW data of Set_Slot_Power_Limit message" hexmask.long 0x0 0.--31. 1. "SLOT_PWR_PAYLD,MDW data of Set_Slot_Power_Limit message" line.long 0x4 "PE0_RX_CURR_LTR_LATENCY,Current LTR values" hexmask.long 0x4 0.--31. 1. "CURR_LTR_LATENCY,The current LTR values reported and in-use by the downstream device." rgroup.long 0x1090++0xF line.long 0x0 "PE0_RX_MSG_HDR_1,PCIe Controller 0 Receive Message Header 1" hexmask.long.byte 0x0 24.--31. 1. "MSG_HDR_BYTE0,Byte 0" newline hexmask.long.byte 0x0 16.--23. 1. "MSG_HDR_BYTE1,Byte 1" newline hexmask.long.byte 0x0 8.--15. 1. "MSG_HDR_BYTE2,Byte 2" newline hexmask.long.byte 0x0 0.--7. 1. "MSG_HDR_BYTE3,Byte 3" line.long 0x4 "PE0_RX_MSG_HDR_2,PCIe Controller 0 Receive Message Header 2" hexmask.long.byte 0x4 24.--31. 1. "MSG_HDR_BYTE4,Byte 4" newline hexmask.long.byte 0x4 16.--23. 1. "MSG_HDR_BYTE5,Byte 5" newline hexmask.long.byte 0x4 8.--15. 1. "MSG_HDR_BYTE6,Byte 6" newline hexmask.long.byte 0x4 0.--7. 1. "MSG_HDR_BYTE7,Byte 7" line.long 0x8 "PE0_RX_MSG_HDR_3,PCIe Controller 0 Receive Message Header 3" hexmask.long.byte 0x8 24.--31. 1. "MSG_HDR_BYTE8,Byte 8" newline hexmask.long.byte 0x8 16.--23. 1. "MSG_HDR_BYTE9,Byte 9" newline hexmask.long.byte 0x8 8.--15. 1. "MSG_HDR_BYTE10,Byte 10" newline hexmask.long.byte 0x8 0.--7. 1. "MSG_HDR_BYTE11,Byte 11" line.long 0xC "PE0_RX_MSG_HDR_4,PCIe Controller 0 Receive Message Header 4" hexmask.long.byte 0xC 24.--31. 1. "MSG_HDR_BYTE12,Byte 12" newline hexmask.long.byte 0xC 16.--23. 1. "MSG_HDR_BYTE13,Byte 13" newline hexmask.long.byte 0xC 8.--15. 1. "MSG_HDR_BYTE14,Byte 14" newline hexmask.long.byte 0xC 0.--7. 1. "MSG_HDR_BYTE15,Byte 15" group.long 0x10A0++0xB line.long 0x0 "PE0_RX_MSG_STS,PCIe Controller 0 Receive Message Status" eventfld.long 0x0 31. "MSGQ_OVERFLOW,Receive Message Queue Overflow Status" "0,1" newline eventfld.long 0x0 20. "UNLOCK_STS,Unlock Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 19. "PME_TURN_OFF_STS,PME_Turn_Off Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 18. "VDM_TYPE1_STS,Vendor-Defined Type 1 Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 17. "VDM_TYPE0_STS,Vendor-Defined Type 0 Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 12. "PM_PME_STS,PM_PME Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 11. "PME_TO_ACK_STS,PME_TO_Ack message status" "0: Not captured,1: Captured" newline eventfld.long 0x0 1. "SET_SLOT_PWR_RCVD_STS,Set_Slot_Power_Limit message" "0: Message not received,1: Message received" newline eventfld.long 0x0 0. "LTR_MSG_RCVD_STS,LTR message receive indication" "0: No new LTR message is received,1: Controller has received and LTR message" line.long 0x4 "PE0_RX_MSG_CAP_CTRL,PCIe Controller 0 Receive Message Capture Control" bitfld.long 0x4 20. "CAP_UNLOCK,Capture Unlock message in received Message Header register." "0: Disable,1: Enable" newline bitfld.long 0x4 19. "CAP_PME_TURN_OFF,Capture PME_Turn_Off Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 18. "CAP_VDM_TYPE1,Capture Vendor-Defined Type 1 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 17. "CAP_VDM_TYPE0,Capture Vendor-Defined Type 0 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 16. "CAP_LTR_MSG,Received message header capture enable for LTR messages." "0: Disable Header capture,1: Enable capture enabled" newline bitfld.long 0x4 12. "CAP_PM_PME,Capture PM_PME Message In Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 11. "CAP_PME_TO_ACK,Capture PME_TO_Ack Message In Received Message Header Register" "0: Disable,1: Enable" line.long 0x8 "PE0_RX_MSG_INT_CTRL,PCIe Controller 0 Receive Message Interrupt Control" bitfld.long 0x8 31. "MSGQ_OVERFLOW_INT_EN,Interrupt Enable when Message Queue Overflows" "0: Disable,1: Enable" newline bitfld.long 0x8 20. "UNLOCK_INT_EN,Interrupt Enable when Unlock Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 19. "PME_TURN_OFF_INT_EN,Interrupt Enable when PME_Turn_Off Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 18. "VDM_TYPE1_INT_EN,Interrupt Enable when Vendor-Defined Type 1 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 17. "VDM_TYPE0_INT_EN,Interrupt Enable when Vendor-Defined Type 0 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 12. "PM_PME_INT_EN,Interrupt Enable when PM_PME Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "PME_TO_ACK_INT_EN,Interrupt Enable when PME_TO_Ack Message in Received Message Header Register" "0: Disable,1: Enable" rgroup.long 0x10B0++0x7 line.long 0x0 "PE0_LINK_DBG_1,PCIe Controller 0 Link Debug 1" bitfld.long 0x0 16. "SYMBOL_LOCK,Symbol Lock" "0,1" newline bitfld.long 0x0 0. "RECEIVER_DETECTED,Receiver Detected On Lanes" "0,1" line.long 0x4 "PE0_LINK_DBG_2,PCIe Controller 0 Link Debug 2" bitfld.long 0x4 24. "CDM_IN_RESET,CDM Register In Reset" "0: Not in reset or will not be reset,1: In reset or will be reset" newline bitfld.long 0x4 23. "BRDG_SLV_XFER_PENDING,AXI Slave Non-DBI Transfer Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 22. "BRDG_DBI_XFER_PENDING,AXI Slave DBI Transfer Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 21. "EDMA_XFER_PENDING,eDMA Transfer Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 20. "RADM_XFER_PENDING,Receive Request Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 16. "VC0_Q_NOT_EMPTY,VC0 Queue Not Empty" "0: Empty,1: Not empty" newline bitfld.long 0x4 10.--12. "PHY_POWRDOWN,PHY Power State" "0: P0 (L0): Normal,1: P0s (L0s): Low recovery time power saving,2: P1 (L1): Longer recovery time additional power..,3: P2 (L2): Lowest power state,?,?,?,?" newline bitfld.long 0x4 8.--9. "RATE,Link Signaling Rate" "0: 2.5 GT/s,1: 5.0 GT/s,2: 8.0 GT/s,3: 16.0 GT/s" newline bitfld.long 0x4 7. "RDLH_LINK_UP,Data Link Layer Up or Down Indicator" "0,1" newline bitfld.long 0x4 6. "SMLH_LINK_UP,PHY Link Up or Down Indicator" "0: Down,1: Up" newline hexmask.long.byte 0x4 0.--5. 1. "SMLH_LTSSM_STATE,LTSSM State" rgroup.long 0x10C0++0x7 line.long 0x0 "PE0_AXI_MSTR_DBG_1,PCIe Controller 0 AXI Master Debug 1" hexmask.long.byte 0x0 24.--31. 1. "MSTR_WR_ERR,AXI Master Write Response Error Counter" newline hexmask.long.byte 0x0 16.--23. 1. "MSTR_WR_REQ_PEND,AXI Master Write Pending Request Counter" newline hexmask.long.word 0x0 0.--15. 1. "MSTR_WR_REQ,AXI Master Write Request Counter" line.long 0x4 "PE0_AXI_MSTR_DBG_2,PCIe Controller 0 AXI Master Debug 2" hexmask.long.byte 0x4 24.--31. 1. "MSTR_RD_ERR,AXI Master Read Response Error Counter" newline hexmask.long.byte 0x4 16.--23. 1. "MSTR_RD_REQ_PEND,AXI Master Read Pending Request Counter" newline hexmask.long.word 0x4 0.--15. 1. "MSTR_RD_REQ,AXI Master Read Request Counter" rgroup.long 0x10D0++0x7 line.long 0x0 "PE0_AXI_SLV_DBG_1,PCIe Controller 0 AXI Slave Debug 1" hexmask.long.byte 0x0 24.--31. 1. "SLV_WR_ERR,AXI Slave Write Response Error Counter" newline hexmask.long.byte 0x0 16.--23. 1. "SLV_WR_REQ_PEND,AXI Slave Write Pending Request Counter" newline hexmask.long.word 0x0 0.--15. 1. "SLV_WR_REQ,AXI Slave Write Request Counter" line.long 0x4 "PE0_AXI_SLV_DBG_2,PCIe Controller 0 AXI Slave Debug 2" hexmask.long.byte 0x4 24.--31. 1. "SLV_RD_ERR,AXI Slave Read Response Error Counter" newline hexmask.long.byte 0x4 16.--23. 1. "SLV_RD_REQ_PEND,AXI Slave Read Pending Request Counter" newline hexmask.long.word 0x4 0.--15. 1. "SLV_RD_REQ,AXI Slave Read Request Counter" group.long 0x10E0++0x13 line.long 0x0 "PE0_ERR_STS,PCIe Controller 0 Error Status" eventfld.long 0x0 31. "APBSLV_TIMEOUT_STS,APB Slave Timeout Error" "0: No timeout error detected,1: Timeout error detected" newline eventfld.long 0x0 30. "LINK_DOWN_STS,Link Down Event" "0: No link down error detected,1: Link down error detected" newline eventfld.long 0x0 28. "RMLH_DESKEW_ALIGNMENT_ERR,Deskew logic overflow." "0,1" newline eventfld.long 0x0 27. "SMLH_RCVD_LANE_REV,Receiver detected lane reversal." "0: No lane reversal detected,1: Lane reversal detected" newline eventfld.long 0x0 16. "VC_QOVERFLOW,RADM Queue Overflow Error" "0: No overflow error detected,1: Overflow error detected" newline eventfld.long 0x0 3. "XDLH_SMLH_START_LINK_RETRAIN,Received watchdog timer expired" "0: No link retrain request active,1: Link retrain request is active" newline eventfld.long 0x0 2. "RTLH_REQ_LINK_RETRAIN,Received watchdog timer expired" "0: Watchdog timer not expired,1: Watchdog timer expired" line.long 0x4 "PE0_ERR_INT_CTRL,PCIe Controller 0 Error Interrupt Control" bitfld.long 0x4 31. "APBSLV_TIMEOUT_INT_EN,Interrupt Enable for APB Slave Timeout Error" "0: Disable,1: Enable" newline bitfld.long 0x4 30. "LINK_DOWN_INT_EN,Interrupt Enable for Link Down Event" "0: Disable,1: Enable" newline bitfld.long 0x4 28. "RMLH_DESKEW_ALIGNMENT_ERR_INT_EN,Interrupt enable for PE0_ERR_STS[RMLH_DESKEW_ALIGNMENT_ERR]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 27. "SMLH_RCVD_LANE_REV_INT_EN,Interrupt enable for PE0_ERR_STS[SMLH_RCVD_LANE_REV]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 16. "VC_QOVERFLOW_INT_EN,Interrupt Enable for RADM Queue Overflow Error" "0: Disable,1: Enable" newline bitfld.long 0x4 7. "RXDATA_PERR_INT_EN,Interrupt Enable for Parity Error in the Receive Datapath" "0: Disable,1: Enable" newline bitfld.long 0x4 6. "TXDATA_PERR_BACK_INT_EN,Interrupt Enable for Parity Error at Back End of the Transmit Datapath" "0: Disable,1: Enable" newline bitfld.long 0x4 5. "TXDATA_PERR_FRONT_INT_EN,Interrupt Enable for Parity Error at Front End of the Transmit Datapath" "0: Disable,1: Enable" newline bitfld.long 0x4 4. "USP_EQ_REDO_EXECUTED_INT_EN,Enabled interrupt corresponding to USP_EQ_REDO_EXECUTED_INT_STAT" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 3. "XDLH_SMLH_START_LINK_RETRAIN_INT_EN,Interrupt enable for PE0_ERR_STS[XDLH_SMLH_START_LINK_RETRAIN]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 2. "RTLH_REQ_LINK_RETRAIN_INT_EN,Interrupt enable for PE0_ERR_STS[RTLH_REQ_LINK_RETRAIN]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 1. "SET_SLOT_PWR_RCVD_INT_EN,Interrupt enable for SET_SLOT_PWR_RCVD" "0: Interrupt Disabled,1: Interrupt Enabled" line.long 0x8 "PE0_INT_STS,PCIe Controller 0 Interrupt Status" eventfld.long 0x8 29. "FLRIN_STS,FLR Interrupt Status" "0: No interrupt pending,1: Interrupt is pending" newline eventfld.long 0x8 24. "PM_LINKST_ENTR_L1SUB_STS,Indicates that the controller has entered in the L1 substate." "0,1" newline eventfld.long 0x8 13. "BW_MGT_MSI_STS,Link Bandwidth Management MSI Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 12. "LINK_AUTO_BW_MSI_STS,Link Autonomous Bandwidth MSI Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 10. "LINK_EQ_REQ_INT_STS,Link Equalization Request Interrupt Status" "0: LINK_CONTROL2_LINK_STATUS2_REG[PCIE_CAP_LINK_EQ_REQ] = 0 or LINK_CONTROL3_REG[EQ_REQ_INT_EN] = 0..,1: LINK_CONTROL2_LINK_STATUS2_REG[PCIE_CAP_LINK_EQ_REQ] = LINK_CONTROL3_REG[EQ_REQ_INT_EN] = 1.." newline eventfld.long 0x8 9. "BW_MGT_INT_STS,Link Bandwidth Management Interrupt Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 8. "LINK_AUTO_BW_INT_STS,Link Autonomous Bandwidth Interrupt Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 7. "SYS_ERR_RC_STS,System Error Status" "0: No device reports any system error or the..,1: A device reports a system error and the.." newline eventfld.long 0x8 6. "HP_INT_STS,Hot-Plug Status" "0,1" newline eventfld.long 0x8 5. "PME_INT_STS,PME Interrupt Status" "0: ROOT_CONTROL_ROOT_CAPABILITIES_REG[PCIE_CAP_PME_INT_EN] = 0 or ROOT_STATUS_REG[PCIE_CAP_PME_STATUS] = 0..,1: ROOT_CONTROL_ROOT_CAPABILITIES_REG[PCIE_CAP_PME_INT_EN] = ROOT_STATUS_REG[PCIE_CAP_PME_STATUS] = 1.." newline eventfld.long 0x8 4. "AER_RC_ERR_INT_STS,Root Complex Advanced Error Reporting Status" "0: Fields in ROOT_ERR_STATUS_OFF are 0 or fields in..,1: A field in ROOT_ERR_STATUS_OFF is 1 and its.." newline eventfld.long 0x8 3. "USP_EQ_REDO_EXECUTED_INT_STAT,Interrupt indicating the EQ redo is executed by USP" "0: EQ Redo is executed,1: No EQ Redo executed" newline rbitfld.long 0x8 2. "ERR_INT_STS,Internal Error Interrupt Status" "0,1" newline rbitfld.long 0x8 1. "RX_MSG_INT_STS,Receive Message Interrupt Status" "0,1" line.long 0xC "PE0_MSI_GEN_CTRL,PCIe Controller 0 MSI Generation Control" hexmask.long 0xC 0.--31. 1. "MSI_INT,MSI Vector" line.long 0x10 "PE0_FSM_TRACK_1,PCIe Controller 0 FSM Track 1" rbitfld.long 0x10 31. "EVENT_B_3,TS2 Status in FSM State 3" "0: Not received,1: Received" newline rbitfld.long 0x10 30. "EVENT_A_3,TS1 Status in FSM State 3" "0: Not received,1: Received" newline hexmask.long.byte 0x10 24.--29. 1. "FSM_3,FSM State 3" newline rbitfld.long 0x10 23. "EVENT_B_2,TS2 Status In FSM State 2" "0: Not received,1: Received" newline rbitfld.long 0x10 22. "EVENT_A_2,TS1 Status In FSM State 2" "0: Not received,1: Received" newline hexmask.long.byte 0x10 16.--21. 1. "FSM_2,FSM State 2" newline rbitfld.long 0x10 15. "EVENT_B_1,TS2 Status In FSM State 1" "0: Not received,1: Received" newline rbitfld.long 0x10 14. "EVENT_A_1,TS1 Status In FSM State 1" "0: Not received,1: Received" newline hexmask.long.byte 0x10 8.--13. 1. "FSM_1,FSM State 1" newline bitfld.long 0x10 6. "FSM_MON_EN,FSM Track Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x10 0.--5. 1. "FSM_TRIG,Trigger State Of FSM Track" rgroup.long 0x10F4++0x3 line.long 0x0 "PE0_FSM_TRACK_2,PCIe Controller 0 FSM Track 2" bitfld.long 0x0 31. "EVENT_B_7,TS2 Status in FSM State 7" "0: Not received,1: Received" newline bitfld.long 0x0 30. "EVENT_A_7,TS1 Status in FSM State 7" "0: Not received,1: Received" newline hexmask.long.byte 0x0 24.--29. 1. "FSM_7,FSM State 7" newline bitfld.long 0x0 23. "EVENT_B_6,TS2 Status in FSM State 6" "0: Not received,1: Received" newline bitfld.long 0x0 22. "EVENT_A_6,TS1 Status in FSM State 6" "0: Not received,1: Received" newline hexmask.long.byte 0x0 16.--21. 1. "FSM_6,FSM State 6" newline bitfld.long 0x0 15. "EVENT_B_5,TS2 Status in FSM State 5" "0: Not received,1: Received" newline bitfld.long 0x0 14. "EVENT_A_5,TS1 Status in FSM State 5" "0: Not received,1: Received" newline hexmask.long.byte 0x0 8.--13. 1. "FSM_5,FSM State 5" newline bitfld.long 0x0 7. "EVENT_B_4,TS2 Status in FSM State 4" "0: Not received,1: Received" newline bitfld.long 0x0 6. "EVENT_A_4,TS1 Status in FSM State 4" "0: Not received,1: Received" newline hexmask.long.byte 0x0 0.--5. 1. "FSM_4,FSM State 4" group.long 0x3000++0x3 line.long 0x0 "APB_BRIDGE_TO_CTRL,APB Bridge Timeout Control" hexmask.long.word 0x0 16.--31. 1. "APB_TIMER_LIMT,APB Watchdog Timeout Threshold (us)" newline bitfld.long 0x0 10. "APB_TIMEOUT_DIS,APB Timeout Control Disable" "0: Enable,1: Disable" newline hexmask.long.word 0x0 0.--9. 1. "APBCLK_FREQ,APB Clock Frequency (MHz)" group.long 0x3008++0xB line.long 0x0 "PHY_REG_ADDR,PHY Register Address" bitfld.long 0x0 31. "PHY_REG_EN,Indirect PHY Register Access Enable" "0: Disable,1: Enable" newline hexmask.long.word 0x0 0.--15. 1. "ADDR,Indirect PHY Register Access Address" line.long 0x4 "PHY_REG_DATA,PHY Register Data" hexmask.long.word 0x4 0.--15. 1. "DATA,Indirect PHY Register Access Data" line.long 0x8 "RST_CTRL,Reset Control" bitfld.long 0x8 0. "COLD_RST,Cold Reset Control" "0: Deassert,1: Assert" tree.end tree "PCIE2" base ad:0x4C380000 group.long 0x0++0x23 line.long 0x0 "PCIE_PHY_GEN_CTRL,PCIe PHY General Control" bitfld.long 0x0 31. "PCS_RX0_CMN_REFCLK_MODE,RX common reference clock mode" "0: Disabled,1: Enabled" newline bitfld.long 0x0 30. "PCS_RX0_EB_EMPTY_MODE,Elastic buffer mode" "0: Nominal Half-Full Buffer mode,1: Hybrid Pipe Buffer Mode" newline bitfld.long 0x0 29. "PCS_RX0_RECAL_CONT_EN,Enable re-locking" "0: Disabled,1: Enabled" newline rbitfld.long 0x0 25. "PHY_RTUNE_STS,Resistor Tune Status" "0: Tuning has not started or completed,1: Tuning completed" newline bitfld.long 0x0 24. "PHY_RTUNE_REQ,Resistor Tune Request" "0: Driven to 0,1: Driven to 1" newline hexmask.long.byte 0x0 18.--23. 1. "PCS_RX0_IDLE_LOS_CNT,Control to disable the CDR" newline bitfld.long 0x0 17. "REF_USE_PAD,Reference Is From External Pad" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 16. "REF_REPEAT_CLK_EN,Repeat Reference Clock Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 15. "RX0_DIV16P5_CLK_EN,Enable signal for div 16.5 clock" "0: Disabled,1: Enabled" newline bitfld.long 0x0 14. "RX0_125MHZ_CLK_EN,Enable signal for 125MHz clock" "0: Disabled,1: Enabled" newline bitfld.long 0x0 10. "RX0_TERM_ACDC,Receiver Termination Control For Rx0" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 9. "RX_SRIS_MODE,SRIS Enable As Defined In PCIe ECN" "0: Disables,1: Enables" newline bitfld.long 0x0 2. "CR_PARA_CLK_DIV2_EN,CR Parallel Clock Divider Control" "0: Same as PHY ref_dig_fr_clk,1: Half of ref_dig_fr_clk" newline bitfld.long 0x0 0. "EXT_PCLK_REQ,pipeP_pclk Required By External Logic" "0: Driven to 0,1: Driven to 1" line.long 0x4 "PCIE_PHY_LPBK_CTRL,PCIe PHY Loopback Control" bitfld.long 0x4 1. "LANE0_RX2TX_PAR_LB_EN,Lane0 Parallel (RX to TX) Loopback Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x4 0. "LANE0_TX2RX_LOOPBK,Lane0 Analog Serial Loopback Control" "0: Driven to 0,1: Driven to 1" line.long 0x8 "PCIE_PHY_SRAM_CSR,PCIe PHY SRAM Control And Status" rbitfld.long 0x8 6. "RX_ACK,Receiver acknowledge" "0: Request not completed,1: Request completed" newline rbitfld.long 0x8 4. "TX_ACK,Transmitter acknowledge" "0: Request not completed,1: Request completed" newline rbitfld.long 0x8 2. "SRAM_INIT_DONE,SRAM Initialization Done" "0: 0,1: 1" newline bitfld.long 0x8 1. "SRAM_EXT_LD_DONE,SRAM External Load Done" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x8 0. "SRAM_BYPASS,SRAM Bypass" "0: Disables SRAM Bypass,1: Enables SRAM Bypass" line.long 0xC "PCIE_PHY_PM_CTRL,PCIe PHY power management control" bitfld.long 0xC 4. "TX0_BEACON_EN_OVRD,TX0_BEACON override enable" "0,1" newline bitfld.long 0xC 0. "TX0_BEACON_EN,Transmitter beaconing/LFPS (low frequency period signaling) enable." "0,1" line.long 0x10 "PCIE_PHY_MPLLA_CTRL,PCIe PHY MPLLA Control" rbitfld.long 0x10 31. "MPLLA_STATE,MPLLA State Indicator" "0: 0,1: 1" newline rbitfld.long 0x10 30. "MPLL_STATE,MPLLA or MPLLB State Indicator" "0: phy0_mplla_state and phy0_mpllb_state are 0,1: phy0_mplla_state or phy0_mpllb_state is 1" newline bitfld.long 0x10 5. "MPLLA_INIT_CAL_DISABLE_OVRD,MPLLA calibration disable override" "0: Calibration Disable override disabled,1: Calibration disable override enabled" newline bitfld.long 0x10 4. "MPLLA_INIT_CAL_DISABLE,MPLLA calibration disable control" "0: Enabled MPLLA calibration,1: Disabled MPLLA calibration" newline rbitfld.long 0x10 2. "MPLLA_FORCE_ACK,MPLLA Force Acknowledge" "0,1" newline bitfld.long 0x10 0. "MPLLA_FORCE_EN,MPLLA Force Enable" "0: Driven to 0,1: Driven to 1" line.long 0x14 "PCIE_PHY_MPLLB_CTRL,PCIe PHY MPLLB Control" rbitfld.long 0x14 31. "MPLLB_STATE,MPLLB State Indicator" "0: 0,1: 1" newline rbitfld.long 0x14 30. "MPLL_STATE,MPLLA or MPLLB State Indicator" "0: phy0_mplla_state and phy0_mpllb_state are 0,1: phy0_mplla_state or phy0_mpllb_state is 1" newline bitfld.long 0x14 5. "MPLLB_INIT_CAL_DISABLE_OVRD,MPLLB calibration disable override" "0: Calibration Disable override disabled,1: Calibration disable override enabled" newline bitfld.long 0x14 4. "MPLLB_INIT_CAL_DISABLE,MPLLB calibration disable control" "0: Enabled MPLLB calibration,1: Disabled MPLLB calibration" newline rbitfld.long 0x14 2. "MPLLB_FORCE_ACK,MPLLB Force Acknowledge" "0,1" newline bitfld.long 0x14 0. "MPLLB_FORCE_EN,MPLLB Force Enable" "0: Driven to 0,1: Driven to 1" line.long 0x18 "PCIE_PHY_EXT_CTRL_SEL,PCIe PHY Setting External Control" bitfld.long 0x18 0. "EXT_PHY_CTRL_SEL,External Control Of PHY Setting" "0: Driven to 0,1: Driven to 1" line.long 0x1C "PCIE_PHY_EXT_BS_CTRL,PCIe PHY Boundary Scan Control" bitfld.long 0x1C 6. "EXT_BS_TX_LOWSWING,TX Boundary Scan Low Swing" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x1C 5. "EXT_BS_RX_BIGSWING,RX Boundary Scan Big Swing" "0: Driven to 0,1: Driven to 1" newline hexmask.long.byte 0x1C 0.--4. 1. "EXT_BS_RX_LEVEL,ACJTAG Receiver Sensitivity Level Control" line.long 0x20 "PCIE_PHY_REF_CLK_CTRL,PCIe Reference Clock Control" bitfld.long 0x20 3.--5. "REF_RANGE,Input Reference Clock frequency Range" "0,1,2,3,4,5,6,7" newline bitfld.long 0x20 2. "REF_CLK_DIV2_EN,Input Reference Clock Divider Control" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x20 1. "REF_CLK_MPLLB_DIV2_EN,MPLLB Reference Clock Divider Control" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x20 0. "REF_CLK_MPLLA_DIV2_EN,MPLLA Reference Clock Divider Control" "0: Driven to 0,1: Driven to 1" group.long 0x30++0xB line.long 0x0 "PCIE_PHY_EXT_MPLLA_CTRL_1,PCIe PHY MPLLA Control 1" hexmask.long.byte 0x0 24.--31. 1. "EXT_MPLLA_DIV_MULTIPLIER,MPLLA Output Frequency Multiplier Control" newline bitfld.long 0x0 19. "EXT_MPLLA_DIV_CLK_EN,MPLLA Divide Clock Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 18. "EXT_MPLLA_DIV8_CLK_EN,MPLLA Divide by 8 Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 17. "EXT_MPLLA_DIV16P5_CLK_EN,MPLLA Divide by 16.5 Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 16. "EXT_MPLLA_DIV10_CLK_EN,MPLLA Divide by 10 Enable" "0: Driven to 0,1: Driven to 1" newline hexmask.long.word 0x0 0.--15. 1. "EXT_MPLLA_BANDWIDTH,MPLLA Bandwidth Control" line.long 0x4 "PCIE_PHY_EXT_MPLLA_CTRL_2,PCIe PHY MPLLA Control 2" hexmask.long.word 0x4 12.--22. 1. "EXT_MPLLA_FRACN_CTRL,MPLLA Fractional Control" newline hexmask.long.byte 0x4 0.--7. 1. "EXT_MPLLA_MULTIPLIER,MPLLA Frequency Multiplier Control" line.long 0x8 "PCIE_PHY_EXT_MPLLA_CTRL_3,PCIe PHY MPLLA Control 3" bitfld.long 0x8 31. "EXT_MPLLA_WORD_DIV2_EN,MPLLA Word Clock Divide by 2" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x8 28.--30. "EXT_MPLLA_TX_CLK_DIV,MPLLA Tx Clock Divide" "0,1,2,3,4,5,6,7" group.long 0x40++0xB line.long 0x0 "PCIE_PHY_EXT_MPLLB_CTRL_1,PCIe PHY MPLLB Control 1" hexmask.long.byte 0x0 24.--31. 1. "EXT_MPLLB_DIV_MULTIPLIER,MPLLB Output Frequency Multiplier Control" newline bitfld.long 0x0 19. "EXT_MPLLB_DIV_CLK_EN,MPLLB Divide Clock Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 18. "EXT_MPLLB_DIV8_CLK_EN,MPLLB Divide by 8 Enable" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x0 16. "EXT_MPLLB_DIV10_CLK_EN,MPLLB Divide by 10 Enable" "0: Driven to 0,1: Driven to 1" newline hexmask.long.word 0x0 0.--15. 1. "EXT_MPLLB_BANDWIDTH,MPLLB Bandwidth Control" line.long 0x4 "PCIE_PHY_EXT_MPLLB_CTRL_2,PCIe PHY MPLLB Control 2" hexmask.long.word 0x4 12.--22. 1. "EXT_MPLLB_FRACN_CTRL,MPLLB Fractional Control" newline hexmask.long.byte 0x4 0.--7. 1. "EXT_MPLLB_MULTIPLIER,MPLLB Frequency Multiplier Control" line.long 0x8 "PCIE_PHY_EXT_MPLLB_CTRL_3,PCIe PHY MPLLB Control 3" bitfld.long 0x8 31. "EXT_MPLLB_WORD_DIV2_EN,MPLLB Word Clock Divide by 2" "0: Driven to 0,1: Driven to 1" newline bitfld.long 0x8 28.--30. "EXT_MPLLB_TX_CLK_DIV,MPLLB Tx Clock Divide" "0,1,2,3,4,5,6,7" group.long 0x50++0xB line.long 0x0 "PCIE_PHY_EXT_RX_EQ_CTRL_1A,PCIe PHY RX Equalization Control 1 For Gen1 Speed" hexmask.long.byte 0x0 25.--28. 1. "EXT_RX_EQ_CTLE_POLE_G1,RX Equalization CTLE Pole" newline hexmask.long.byte 0x0 16.--20. 1. "EXT_RX_EQ_CTLE_BOOST_G1,RX Equalization CTLE Boost" newline bitfld.long 0x0 4.--6. "EXT_RX_EQ_ATT_LVL_G1,RX Equalization Attenuation Level" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2. "EXT_RX_ADAPT_DFE_EN_G1,RX DFE Enable" "0,1" newline bitfld.long 0x0 0. "EXT_RX_ADAPT_AFE_EN_G1,RX Adaptation Enable" "0,1" line.long 0x4 "PCIE_PHY_EXT_RX_EQ_CTRL_1B,PCIe PHY RX Equalization Control 2 For Gen1 Speed" hexmask.long.byte 0x4 24.--31. 1. "EXT_RX_EQ_VGA2_GAIN_G1,RX Equalization VGA Gain 2" newline hexmask.long.byte 0x4 16.--23. 1. "EXT_RX_EQ_VGA1_GAIN_G1,RX Equalization VGA Gain 1" newline hexmask.long.word 0x4 0.--15. 1. "EXT_RX_EQ_DFE_TAP1_G1,RX Equalization DFE Tap1" line.long 0x8 "PCIE_PHY_EXT_RX_EQ_CTRL_1C,PCIe PHY RX Equalization Control 3 For Gen1 Speed" hexmask.long.byte 0x8 0.--7. 1. "EXT_RX_EQ_DELTA_IQ_G1,RX Equalization DELTA IQ" group.long 0x60++0xB line.long 0x0 "PCIE_PHY_EXT_RX_EQ_CTRL_2A,PCIe PHY RX Equalization Control 1 For Gen2 Speed" hexmask.long.byte 0x0 26.--31. 1. "EXT_RX_EQ_CTLE_POLE_G2,RX Equalization CTLE Pole" newline hexmask.long.word 0x0 16.--25. 1. "EXT_RX_EQ_CTLE_BOOST_G2,RX Equalization CTLE Boost" newline hexmask.long.byte 0x0 4.--9. 1. "EXT_RX_EQ_ATT_LVL_G2,RX Equalization Attenuation Level" newline bitfld.long 0x0 2.--3. "EXT_RX_ADAPT_DFE_EN_G2,RX DFE Enable" "0,1,2,3" newline bitfld.long 0x0 0.--1. "EXT_RX_ADAPT_AFE_EN_G2,RX Adaptation Enable" "0,1,2,3" line.long 0x4 "PCIE_PHY_EXT_RX_EQ_CTRL_2B,PCIe PHY RX Equalization Control 2 For Gen2 Speed" hexmask.long.byte 0x4 24.--31. 1. "EXT_RX_EQ_VGA2_GAIN_G2,RX Equalization VGA Gain 2" newline hexmask.long.byte 0x4 16.--23. 1. "EXT_RX_EQ_VGA1_GAIN_G2,RX Equalization VGA Gain 1" newline hexmask.long.word 0x4 0.--15. 1. "EXT_RX_EQ_DFE_TAP1_G2,RX Equalization DFE Tap1" line.long 0x8 "PCIE_PHY_EXT_RX_EQ_CTRL_2C,PCIe PHY RX Equalization Control 3 For Gen2 Speed" hexmask.long.byte 0x8 0.--7. 1. "EXT_RX_EQ_DELTA_IQ_G2,RX Equalization DELTA IQ" group.long 0x70++0xB line.long 0x0 "PCIE_PHY_EXT_RX_EQ_CTRL_3A,PCIe PHY RX Equalization Control 1 For Gen3 Speed" hexmask.long.byte 0x0 26.--31. 1. "EXT_RX_EQ_CTLE_POLE_G3,RX Equalization CTLE Pole" newline hexmask.long.word 0x0 16.--25. 1. "EXT_RX_EQ_CTLE_BOOST_G3,RX Equalization CTLE Boost" newline hexmask.long.byte 0x0 4.--9. 1. "EXT_RX_EQ_ATT_LVL_G3,RX Equalization Attenuation Level" newline bitfld.long 0x0 2.--3. "EXT_RX_ADAPT_DFE_EN_G3,RX DFE Enable" "0,1,2,3" newline bitfld.long 0x0 0.--1. "EXT_RX_ADAPT_AFE_EN_G3,RX Adaptation Enable" "0,1,2,3" line.long 0x4 "PCIE_PHY_EXT_RX_EQ_CTRL_3B,PCIe PHY RX Equalization Control 2 For Gen3 Speed" hexmask.long.byte 0x4 24.--31. 1. "EXT_RX_EQ_VGA2_GAIN_G3,RX Equalization VGA Gain 2" newline hexmask.long.byte 0x4 16.--23. 1. "EXT_RX_EQ_VGA1_GAIN_G3,RX Equalization VGA Gain 1" newline hexmask.long.word 0x4 0.--15. 1. "EXT_RX_EQ_DFE_TAP1_G3,RX Equalization DFE Tap1" line.long 0x8 "PCIE_PHY_EXT_RX_EQ_CTRL_3C,PCIe PHY RX Equalization Control 3 For Gen3 Speed" hexmask.long.byte 0x8 0.--7. 1. "EXT_RX_EQ_DELTA_IQ_G3,RX Equalization DELTA IQ" group.long 0x90++0xB line.long 0x0 "PCIE_PHY_EXT_CALI_CTRL_1,PCIe PHY Calibration Control For Gen1 Speed" bitfld.long 0x0 31. "PROTOCOL0_EXT_RX_CDR_VCO_LOWFREQ_G1,Overrides settings for receiver vco" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "EXT_RX_REF_LD_VAL_G1,RX VCO Calibration Reference Load Value" newline hexmask.long.word 0x0 0.--12. 1. "EXT_RX_VCO_LD_VAL_G1,RX VCO Calibration Load Value" line.long 0x4 "PCIE_PHY_EXT_CALI_CTRL_2,PCIe PHY Calibration Control For Gen2 Speed" bitfld.long 0x4 31. "PROTOCOL0_EXT_RX_CDR_VCO_LOWFREQ_G2,Overrides settings for receiver vco" "0,1" newline hexmask.long.byte 0x4 16.--21. 1. "EXT_RX_REF_LD_VAL_G2,RX VCO Calibration Reference Load Value" newline hexmask.long.word 0x4 0.--12. 1. "EXT_RX_VCO_LD_VAL_G2,RX VCO Calibration Load Value" line.long 0x8 "PCIE_PHY_EXT_CALI_CTRL_3,PCIe PHY Calibration Control For Gen3 Speed" bitfld.long 0x8 31. "PROTOCOL0_EXT_RX_CDR_VCO_LOWFREQ_G3,Overrides settings for receiver vco" "0,1" newline hexmask.long.byte 0x8 16.--21. 1. "EXT_RX_REF_LD_VAL_G3,RX VCO Calibration Reference Load Value" newline hexmask.long.word 0x8 0.--12. 1. "EXT_RX_VCO_LD_VAL_G3,RX VCO Calibration Load Value" group.long 0xA0++0x7 line.long 0x0 "PCIE_PHY_EXT_MISC_CTRL_1,PCIe PHY Miscellaneous Control 1" bitfld.long 0x0 29.--31. "EXT_RX_TERM_CTRL,RX Term Control" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 24.--28. 1. "EXT_RX_VREF_CTRL,RX Biasing Current Control" newline bitfld.long 0x0 1.--3. "EXT_RX_LOS_THRESHOLD,Receiver LOS Threshold" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "EXT_RX_LOS_LFPS_EN,Receiver LOS LFPS Enable" "0: Driven to 0,1: Driven to 1" line.long 0x4 "PCIE_PHY_EXT_MISC_CTRL_2,PCIe PHY Miscellaneous Control 2" bitfld.long 0x4 31. "PROTOCOL0_EXT_TX_VBOOST_EN,Transmitter voltage boost enable" "0: Disabled,1: Enabled" newline bitfld.long 0x4 24.--26. "EXT_TX_TERM_CTRL,Tx Term Control" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 16.--18. "EXT_TX_VBOOST_LVL,TX Voltage Boost Maximum Level" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 0.--3. 1. "EXT_TX_IBOOST_LVL,Transmitter Current Boost Level" group.long 0xB0++0xB line.long 0x0 "PCIE_PHY_EXT_TX_EQ_CTRL_1,PCIe PHY TX Equalization Control For Gen1 Speed" bitfld.long 0x0 28. "EXT_TX_EQ_OVRD_G1,TX Equalization Override Enable" "0,1" newline hexmask.long.byte 0x0 16.--20. 1. "EXT_TX_EQ_MAIN_G1,TX Equalization Amplitude Adjustment Control" newline hexmask.long.byte 0x0 8.--11. 1. "EXT_TX_EQ_PRE_G1,TX Equalization Pre-Emphasis Level Adjustment Control" newline hexmask.long.byte 0x0 0.--3. 1. "EXT_TX_EQ_POST_G1,TX Equalization Post-Emphasis Level Adjustment Control" line.long 0x4 "PCIE_PHY_EXT_TX_EQ_CTRL_2,PCIe PHY TX Equalization Control For Gen2 Speed" bitfld.long 0x4 28.--29. "EXT_TX_EQ_OVRD_G2,TX Equalization Override Enable" "0,1,2,3" newline hexmask.long.byte 0x4 16.--20. 1. "EXT_TX_EQ_MAIN_G2,TX Equalization Amplitude Adjustment Control" newline hexmask.long.byte 0x4 8.--11. 1. "EXT_TX_EQ_PRE_G2,TX Equalization Pre-Emphasis Level Adjustment Control" newline hexmask.long.byte 0x4 0.--3. 1. "EXT_TX_EQ_POST_G2,TX Equalization Post-Emphasis Level Adjustment Control" line.long 0x8 "PCIE_PHY_EXT_TX_EQ_CTRL_3,PCIe PHY TX Equalization Control For Gen3 Speed" bitfld.long 0x8 28.--29. "EXT_TX_EQ_OVRD_G3,TX Equalization Override Enable" "0,1,2,3" newline hexmask.long.byte 0x8 16.--20. 1. "EXT_TX_EQ_MAIN_G3,TX Equalization Amplitude Adjustment Control" newline hexmask.long.byte 0x8 8.--11. 1. "EXT_TX_EQ_PRE_G3,TX Equalization Pre-Emphasis Level Adjustment Control" newline hexmask.long.byte 0x8 0.--3. 1. "EXT_TX_EQ_POST_G3,TX Equalization Post-Emphasis Level Adjustment Control" rgroup.long 0xE0++0xF line.long 0x0 "SS_RO_REG_0,Subsystem Read-Only Register 0" hexmask.long.byte 0x0 26.--31. 1. "MSTR_ARMISC_INFO_DMA,DMA Bits Of The AXI Read Master Transaction" newline bitfld.long 0x0 19. "CDM_REG_CHK_CMPLT,Register Checking Complete" "0: Not completed,1: Completed" newline bitfld.long 0x0 18. "CDM_REG_CHK_CMP_ERR,CDM Comparison Error" "0: The values are not matched.,1: The values are matched." newline bitfld.long 0x0 17. "CDM_REG_CHK_LOGIC_ERR,Error In Register-Checking Logic" "0: No error,1: Error" newline hexmask.long.byte 0x0 5.--12. 1. "MSI_CTRL_INT_VEC,DSP AXI MSI Interrupt Vector" newline bitfld.long 0x0 4. "MSTR_ARMISC_INFO_LAST_DCMP_TLP,Last TLP Of The PCIe Controller's AXI Master Read Request" "0: The TLP in the transaction is not the last TLP..,1: The TLP in the transaction is the last TLP of.." newline bitfld.long 0x0 3. "MSTR_AWMISC_INFO_LAST_DCMP_TLP,Last TLP Of The PCIe controller's AXI Master Write Request" "0: The TLP in the transaction is not the last TLP..,1: The TLP in the transaction is the last TLP of.." newline bitfld.long 0x0 2. "PHY_RX1_LOS,Receive Loss Of Signal (LOS) Output 1" "0: The receiver has not lost the signal.,1: The receiver has lost the signal." newline bitfld.long 0x0 1. "PHY_RX0_LOS,Receive Loss Of Signal (LOS) Output 0" "0: The receiver has not lost the signal.,1: The receiver has lost the signal." line.long 0x4 "SS_RO_REG_1,Subsystem Read-Only Register 1" hexmask.long.word 0x4 17.--27. 1. "SLV_RMISC_INFO,Miscellaneous Read Information" newline hexmask.long.word 0x4 6.--16. 1. "SLV_BMISC_INFO,Miscellaneous Write Information" newline hexmask.long.byte 0x4 0.--5. 1. "MSTR_AWMISC_INFO_DMA,DMA Bits Of The AXI Write Master Transaction" line.long 0x8 "SS_RO_REG_2,Subsystem Read-Only Register 2" hexmask.long 0x8 0.--31. 1. "REG2,Subsystem Read Only Register 2" line.long 0xC "SS_RO_REG_3,Subsystem Read-Only Register 3" hexmask.long 0xC 0.--31. 1. "REG3,Subsystem Read Only Register 3" group.long 0xF0++0x17 line.long 0x0 "SS_RW_REG_0,Subsystem Read/Write Register 0" bitfld.long 0x0 31. "MSTR_RMISC_INFO,Miscellaneous Information Related To AXI Master Read-Response Transactions" "0: The controller operates normally.,1: The controller sets the Poisoned TLP (EP) bit in.." newline bitfld.long 0x0 30. "MDR,Memory Data Retention" "0: The subsystem retains data stored in memory and..,1: The subsystem does not retain data stored in.." newline bitfld.long 0x0 29. "PHY_TEST_TX_REF_CLK_EN,TX Reference Clock Output Enable" "0: Normal functional operation,1: The reference clock inputs (ref_pad_clk_{p m} or.." newline bitfld.long 0x0 27. "PHY_TEST_POWERDOWN,All Circuits Power-Down Control" "0: The PHY circuitry operates normally.,1: The PHY deactivates all its circuitry for IDDQ.." newline bitfld.long 0x0 25. "SLV_AWMISC_INFO_ATU_BYPASS,AXI Slave Write Request iATU Bypass" "0: The iATU must process this request.,1: The iATU must not process this request." newline bitfld.long 0x0 24. "SLV_ARMISC_INFO_ATU_BYPASS,AXI Slave Read Request iATU Bypass" "0: The iATU must process this request.,1: The iATU must not process this request." newline bitfld.long 0x0 23. "CLKEN,PCIe Reference Clock Enable" "0: External clock (phy0_ref_pad_clk_m..,1: Internal clock (PCIE_REF_CLK) is the reference.." newline hexmask.long.byte 0x0 15.--22. 1. "SLV_AWMISC_INFO_P_TAG,AXI Slave Write Request Tag" newline bitfld.long 0x0 14. "SLV_WMISC_INFO,Miscellaneous Information Related To AXI Slave Write-Data Transactions" "0: The controller operates normally.,1: The controller sets the Poisoned TLP (EP) bit in.." newline bitfld.long 0x0 12.--13. "MSTR_RMISC_INFO_CPL_STAT,AXI Master Read Response Selection Bus" "0: Successful completion,1: Completer abort,2: Unsupported request,3: Successful completion" newline bitfld.long 0x0 10.--11. "MSTR_BMISC_INFO_CPL_STAT,AXI Master Write Response Selection Bus" "0: Successful completion,1: Completer abort,2: Unsupported request,3: Successful completion" newline bitfld.long 0x0 9. "PHY0_CR_PARA_SEL,Control Register (CR) Parallel Interface Select" "0: Select the JTAG interface.,1: Select the CR interface." newline bitfld.long 0x0 7. "APP_XFER_PENDING,Application Transfer Pending" "0: No transactions exist outside the core,1: Transactions exist outside the core and the core.." newline bitfld.long 0x0 6. "SYS_INT,System Interrupt" "0,1" newline bitfld.long 0x0 5. "SYS_EML_INTERLOCK_ENGAGED,System Electromechanical Interlock Engaged" "0: Electromechanical interlock is not engaged,1: Electromechanical interlock is engaged" newline bitfld.long 0x0 4. "SYS_CMD_CPLED_INT,Command Completed Interrupt" "0: Command not completed,1: Command completed" newline bitfld.long 0x0 3. "SYS_ATTEN_BUTTON_PRESSED,Attention Button Pressed" "0,1" newline bitfld.long 0x0 0.--2. "SUBSYS_MODE,Subsystem Mode Selection" "0,1,2,3,4,5,6,7" line.long 0x4 "SS_RW_REG_1,Subsystem Read/Write Register 1" bitfld.long 0x4 7. "PARITY_MODE_SLV_RD_DATA,Parity Error Injection In AXI Slave Read Data Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 6. "PARITY_MODE_MSTR_WR_DATA,Parity Error Injection In AXI Master Write Data Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 5. "PARITY_MODE_MSTR_WR_ADDR,Parity Error Injection In AXI Master Write Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 4. "PARITY_MODE_MSTR_RD_ADDR,Parity Error Injection In AXI Master Read Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 3. "PARITY_MODE_SLV_WR_DATA,Parity Error Injection In AXI Slave Write Data Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 2. "PARITY_MODE_SLV_WR_ADDR,Parity Error Injection In AXI Slave Write Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 1. "PARITY_MODE_SLV_RD_ADDR,Parity Error Injection In AXI Slave Read Address Bus" "0: No error injected,1: Error injected" newline bitfld.long 0x4 0. "PARITY_MODE_MSTR_RD_DATA,Parity Error Injection In AXI Master Read Data Bus" "0: No error injected,1: Error injected" line.long 0x8 "SS_RW_REG_2,Subsystem Read/Write Register 2" hexmask.long.tbyte 0x8 0.--21. 1. "SLV_ARMISC_INFO,Miscellaneous Information Associated With The AXI Slave Read Transaction" line.long 0xC "SS_RW_REG_3,Subsystem Read/Write Register 3" hexmask.long.tbyte 0xC 0.--21. 1. "SLV_AWMISC_INFO,Miscellaneous Information Associated With The AXI Slave Write Transaction" line.long 0x10 "SS_RW_REG_4,Subsystem Read/Write Register 4" hexmask.long 0x10 0.--31. 1. "SLV_AWMISC_INFO_HDR_3DW,AXI Slave Third Header DWs" line.long 0x14 "SS_RW_REG_5,Subsystem Read/Write Register 5" hexmask.long 0x14 0.--31. 1. "SLV_AWMISC_INFO_HDR_4DW,AXI Slave Fourth Header DWs" rgroup.long 0x1000++0x3 line.long 0x0 "PCIE_SUBSYSTEM_VERSION,PCIe Subsystem Version" hexmask.long 0x0 0.--31. 1. "VERSION,PCIe Subsystem Version" group.long 0x1004++0x17 line.long 0x0 "PE0_CLKREQ_CTRL,PCIe Controller Clock Request Override" bitfld.long 0x0 1. "SW_CLK_REQ,Software override for clkreq input of pcie controller." "0,1" newline bitfld.long 0x0 0. "CLKREQ_OVER,CLKREQ override" "0: CLKREQ is driven by system,1: CLKREQ is driven by software" line.long 0x4 "PE0_LUT_ACSCTRL,LUT access Control" bitfld.long 0x4 16. "RWA,LUT Entry Read/Write access control" "0: Write into RBP_LUT entry specified in ENTRY_LOC..,1: Read from the RBP_LUT entry specified in.." newline hexmask.long.byte 0x4 0.--4. 1. "ENLOC,LUT Entry location to be accessed" line.long 0x8 "PE0_LUT_DATA1,LUT Data1 register" bitfld.long 0x8 31. "VLD,LUT Entry is valid for matching" "0: Disable,1: Enable" newline bitfld.long 0x8 8.--10. "DAC_ID,DAC Index" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 0.--5. 1. "STREAM_ID,VFID of VF at the target port corresponding to REQID" line.long 0xC "PE0_LUT_DATA2,LUT Data2 register" hexmask.long.word 0xC 16.--31. 1. "REQID,REQID value to matched with master port RID (in RC mode) and {BAR# PF# VFA VF# } (in EP mode)" newline hexmask.long.word 0xC 0.--15. 1. "MASK,Mask to be used for matching with REQID field" line.long 0x10 "PE0_LUT_INT_STS,LUT Interrupt Status" eventfld.long 0x10 31. "LUTWMS,LUT Write Request Miss Status" "0,1" newline eventfld.long 0x10 30. "LUTRMS,LUT Read Request Miss Status" "0,1" line.long 0x14 "PE0_LUT_INT_CTRL,LUT Interrupt Control" bitfld.long 0x14 31. "LUTWMIE,LUT Write request Miss Interrupt Enable" "0: Interrupt Disable,1: Interrupt Enable" newline bitfld.long 0x14 30. "LUTRMIE,LUT Read request Miss Interrupt Enable" "0: Interrupt Disable,1: Interrupt Enable" newline bitfld.long 0x14 0. "DEFAULT_MATCH_ERR_EN,Default entry match error reporting enable" "0: Disabled no error reporting on default match.,1: Error reported on default entry match." rgroup.long 0x101C++0x3 line.long 0x0 "PE0_LUT_CREQID,LUT Request ID Register" hexmask.long.word 0x0 16.--31. 1. "CREQID_WR,Captured Write Requester ID Field" newline hexmask.long.word 0x0 0.--15. 1. "CREQID_RD,Captured Read Requester ID Field" group.long 0x1020++0x3 line.long 0x0 "FLR_CTRL_STS,Function Level Reset (FLR) Control and Status Register" bitfld.long 0x0 31. "FLRDNBYP,Bypass SW wait for FLR DONE confirmation" "0: NOT BYPASSED,1: BYPASSED" newline rbitfld.long 0x0 0. "FLRIS,Indicates the FLR request ." "0: No FLR request pending,1: FLR request arrived approval pending." group.long 0x1040++0x3 line.long 0x0 "LINK_INT_CTRL_STS,Link Interrupt Control And Status" eventfld.long 0x0 11. "RDLH_LINK_DOWN_INT_STS,RDLH Link down event interrupt status" "0: No interrupt pending,1: Interrupt is pending" newline bitfld.long 0x0 10. "RDLH_LINK_DOWN_INT_EN,Interrupt enable for RDLH Link down event" "0: Interrupt disable,1: Interrupt enable" newline eventfld.long 0x0 9. "RDLH_LINK_UP_INT_STS,RDLH Link up event interrupt status" "0: No interrupt pending,1: Interrupt is pending" newline bitfld.long 0x0 8. "RDLH_LINK_UP_INT_EN,Interrupt enable for RDLH Link up event" "0: Interrupt disable,1: Interrupt enable" newline rbitfld.long 0x0 6. "LTSSM_STATE_RCVRY_EQ,Recovery Equalization State Status" "0: Not in Recovery Equalization state,1: In Recovery Equalization state" newline bitfld.long 0x0 5. "PHY_LINK_UP_INT_EN,PHY Link Up Interrupt Enable Control" "0: Disable,1: Enable" newline bitfld.long 0x0 4. "PHY_LINK_DOWN_INT_EN,PHY Link Down Interrupt Enable Control" "0: Disable,1: Enable" newline bitfld.long 0x0 2. "LINK_REQ_RST_NOT_CLR,Clear Link Request Reset Status" "0: Do not change LINK_REQ_RST_NOT_STS,1: Change LINK_REQ_RST_NOT_STS to 0" newline bitfld.long 0x0 1. "LINK_REQ_RST_NOT_INT_EN,Link Request Reset Interrupt Enable Control" "0: Disable,1: Enable" newline rbitfld.long 0x0 0. "LINK_REQ_RST_NOT_STS,Link Request Reset Status" "0: Not set,1: Set" group.long 0x1050++0x13 line.long 0x0 "PE0_GEN_CTRL_1,PCIe Controller 0 General Control 1" bitfld.long 0x0 12. "ECAM_BUS_ERR_CTRL,Return error on system bus for invalid ECAM accesses from system" "0: Do not return error,1: Return error" newline bitfld.long 0x0 8. "SRIS_MODE,SRIS Operation Mode" "0: Non-SRIS,1: SRIS" newline hexmask.long.byte 0x0 0.--3. 1. "DEVICE_TYPE,Device Type" line.long 0x4 "PE0_GEN_CTRL_2,PCIe Controller 0 General Control 2" bitfld.long 0x4 29. "FLRIE,Interrupt enable for FLR request PE0_ERR_STS[FLRIN_STS]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 24. "PM_LINKST_ENTR_L1SUB_INT_EN,Interrupt enable for PM_LINKST_ENTR_L1SUB_STS" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 11. "LTR_MSG_RCVD_INT_EN,Interrupt enable for LTR_MSG_RCVD" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 10. "MSI_INT_CTRL,MSI interrupt mapping Control" "0: Interrupt is mapped to pcie0_msi_ctrl_int,1: Interrupt is mapped to INTA interrupt" newline bitfld.long 0x4 9. "SLV_ACLK_UNGATE,AXI Slave Clock Gating Control" "0: Gate,1: Do not gate" newline bitfld.long 0x4 8. "MSTR_ACLK_UNGATE,AXI Master Clock Gating Control" "0: Gate,1: Do not gate" newline bitfld.long 0x4 5. "CFG_LINK_EQ_REQ_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[LINK_EQ_REQ_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 4. "CFG_BW_MGT_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[BW_MGT_MSI_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 3. "CFG_LINK_AUTO_BW_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[LINK_AUTO_BW_MSI_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 2. "HP_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[HP_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 1. "CFG_PME_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[PME_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" newline bitfld.long 0x4 0. "CFG_AER_RC_ERR_INT_CTRL,INTA interrupt mapping control for PE0_INT_STS[AER_RC_ERR_INT_STS]" "0: Error is mapped to register bit,1: Error is mapped to INTA interrupt" line.long 0x8 "PE0_GEN_CTRL_3,PCIe Controller 0 General Control 3" bitfld.long 0x8 13.--15. "DIAG_CTRL_BUS,Diagnostic Control Bus" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 2. "HOT_RESET,Hot Reset" "?,1: Trigger a hot reset" newline bitfld.long 0x8 1. "CRS_EN,Configuration Request Retry Status (CRS) Enable" "0: PCIe controller does not complete incoming..,1: PCIe controller completes incoming configuration.." newline bitfld.long 0x8 0. "LTSSM_EN,LTSSM Enable" "0: Hold LTSSM in the Detect state until your..,1: Allow LTSSM to continue link establishment and.." line.long 0xC "PE0_GEN_CTRL_4,PCIe Controller 0 General Control 4" bitfld.long 0xC 31. "CRS_EN_CLR_MASK,CRS_EN Clear Mask" "0: CRS_EN does not change,1: CRS_EN goes to its reset value" newline bitfld.long 0xC 30. "LTSSM_EN_CLR_MASK,LTSSM_EN Clear Mask" "0: LTSSM_EN does not change,1: LTSSM_EN goes to its reset value" line.long 0x10 "PE0_PM_CTRL,PCIe Controller 0 PM Control" bitfld.long 0x10 31. "BEACON_INT_EN,Beacon Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 21. "APP_CLK_PM_EN,Clock PM Feature Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 20. "APP_CLK_REQ,Wake Up Reference Clock" "0: No request to wake up,1: Explicit request to wake up" newline bitfld.long 0x10 19. "READY_ENTER_L23,Ready To Enter L23" "0: Not ready,1: Ready" newline bitfld.long 0x10 18. "EXIT_ASPM_L1,Request To Exit ASPM State L1" "0: No request to exit,1: Explicit request to exit" newline bitfld.long 0x10 17. "ENTER_ASPM_L1,Request To Enter ASPM State L1" "0: No request to enter,1: Explicit request to enter" newline bitfld.long 0x10 16. "PM_PME_REQ,PM_PME Message Request" "0,1" newline bitfld.long 0x10 7. "APP_L1SUB_DISABLE,Disable L1 sub-states entry" "0: Entry to L1 sub-states is not gated,1: Entry to L1 sub-states is gated" newline hexmask.long.byte 0x10 0.--4. 1. "PME_PF_INDEX,PF Index Of PM_PME Request And PM Status" rgroup.long 0x1064++0x3 line.long 0x0 "PE0_PM_STS,PCIe Controller 0 PM Status" hexmask.long.byte 0x0 25.--29. 1. "PM_SLAVE_STATE,Power management slave FSM state" newline hexmask.long.byte 0x0 20.--24. 1. "PM_MASTER_STATE,Power management master FSM state" newline bitfld.long 0x0 16. "PM_LINKST_IN_L1SUB_STS,Power management is in L1 substate" "0,1" newline bitfld.long 0x0 15. "PM_LINKST_L2_EXIT,Power Management is Exiting L2 State" "0: Not in L2 exit,1: In L2 exit" newline bitfld.long 0x0 14. "PM_LINKST_IN_L2,Power Management in L2 State" "0: Not in L2,1: In L2" newline bitfld.long 0x0 13. "PM_ASPM_L1_ENTR_RDY,Power Management L1 Entry Ready" "0,1" newline bitfld.long 0x0 12. "PM_LINKST_IN_L1,Power Management In L1 State" "0: Not in L1,1: In L1" newline bitfld.long 0x0 11. "PM_LINKST_IN_L0S,Power Management In L0s State" "0: Not in L0s,1: In L0s" newline bitfld.long 0x0 8.--10. "PM_CURNT_STATE,PM Controller's Current Power State" "0: L0 and others,1: L0S,2: L1,3: L2,4: L3,?,?,?" newline bitfld.long 0x0 5.--7. "L1_SUBSTATE_FSM,Power management L1 sub-states FSM state" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4. "PM_STATUS,PME Status Mirror" "0,1" newline bitfld.long 0x0 3. "PM_PME_EN,PME Enable Mirror" "0,1" newline bitfld.long 0x0 0.--2. "PM_DSTATE,Current Power Management D-State" "0: D0,1: D1,2: D2,3: D3,4: Uninitialized,?,?,?" group.long 0x1068++0x1B line.long 0x0 "PE0_TX_LTR_MSG_LATENCY,PCIe Controller LTR message latency" hexmask.long 0x0 0.--31. 1. "LTR_MSG_LATENCY,LTR message to be sent." line.long 0x4 "PE0_TX_LTR_MSG_FUNC_NUM,Function number that is requesting to send an LTR message." bitfld.long 0x4 0.--2. "LTR_MSG_FUNC_NUM,Function number that is requesting to send an LTR message. Function numbering starts at '0'." "0,1,2,3,4,5,6,7" line.long 0x8 "PE0_TX_MSG_HDR_1,PCIe Controller 0 Transmit Message Header 1" bitfld.long 0x8 29.--30. "MSG_HDR_FM,Format Field" "0,1,2,3" newline hexmask.long.byte 0x8 24.--28. 1. "MSG_HDR_TYPE,Type Field" newline bitfld.long 0x8 20.--22. "MSG_HDR_TC,Traffic Class" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 15. "MSG_HDR_TD,TLP Digest (TD)" "0,1" newline bitfld.long 0x8 14. "MSG_HDR_EP,Poisoned TLP (EP)" "0,1" newline bitfld.long 0x8 12.--13. "MSG_HDR_ATTR,Attribute[1:0] Relaxing Ordering and No Snoop" "0,1,2,3" newline hexmask.long.word 0x8 0.--9. 1. "MSG_HDR_LENGTH,Tied to 0." line.long 0xC "PE0_TX_MSG_HDR_2,PCIe Controller 0 Transmit Message Header 2" hexmask.long.byte 0xC 24.--31. 1. "MSG_HDR_BYTE4,Requester ID[15:8] Byte 4" newline hexmask.long.byte 0xC 16.--23. 1. "MSG_HDR_BYTE5,Requester ID[7:0] Byte 5" newline hexmask.long.byte 0xC 8.--15. 1. "MSG_HDR_BYTE6,Message Tag Byte 6" newline hexmask.long.byte 0xC 0.--7. 1. "MSG_HDR_BYTE7,Message Code Byte 7" line.long 0x10 "PE0_TX_MSG_HDR_3,PCIe Controller 0 Transmit Message Header 3" hexmask.long.byte 0x10 24.--31. 1. "MSG_HDR_BYTE8,Byte 8" newline hexmask.long.byte 0x10 16.--23. 1. "MSG_HDR_BYTE9,Byte 9" newline hexmask.long.byte 0x10 8.--15. 1. "MSG_HDR_BYTE10,Byte 10" newline hexmask.long.byte 0x10 0.--7. 1. "MSG_HDR_BYTE11,Byte 11" line.long 0x14 "PE0_TX_MSG_HDR_4,PCIe controller 0 transmit message header 4" hexmask.long.byte 0x14 24.--31. 1. "MSG_HDR_BYTE12,Byte 12" newline hexmask.long.byte 0x14 16.--23. 1. "MSG_HDR_BYTE13,Byte 13" newline hexmask.long.byte 0x14 8.--15. 1. "MSG_HDR_BYTE14,Byte 14" newline hexmask.long.byte 0x14 0.--7. 1. "MSG_HDR_BYTE15,Byte 15" line.long 0x18 "PE0_TX_MSG_REQ,PCIe Controller 0 Transmit Message Request" bitfld.long 0x18 20. "UNLOCK_REQ,Unlock message" "0,1" newline bitfld.long 0x18 19. "PME_TURN_OFF_REQ,PME_Turn_Off Message Request" "0,1" newline bitfld.long 0x18 17. "VEN_MSG_REQ,Vendor-Defined Message Request" "0: Normal operation,1: Trigger a vendor-defined message request" newline bitfld.long 0x18 16. "LTR_MSG_REQ,Request to send an LTR message" "0: LTR message request is not pending,1: Send LTR message" rgroup.long 0x1084++0x7 line.long 0x0 "PE0_RX_SLOT_PWR_PAYLD,DW data of Set_Slot_Power_Limit message" hexmask.long 0x0 0.--31. 1. "SLOT_PWR_PAYLD,MDW data of Set_Slot_Power_Limit message" line.long 0x4 "PE0_RX_CURR_LTR_LATENCY,Current LTR values" hexmask.long 0x4 0.--31. 1. "CURR_LTR_LATENCY,The current LTR values reported and in-use by the downstream device." rgroup.long 0x1090++0xF line.long 0x0 "PE0_RX_MSG_HDR_1,PCIe Controller 0 Receive Message Header 1" hexmask.long.byte 0x0 24.--31. 1. "MSG_HDR_BYTE0,Byte 0" newline hexmask.long.byte 0x0 16.--23. 1. "MSG_HDR_BYTE1,Byte 1" newline hexmask.long.byte 0x0 8.--15. 1. "MSG_HDR_BYTE2,Byte 2" newline hexmask.long.byte 0x0 0.--7. 1. "MSG_HDR_BYTE3,Byte 3" line.long 0x4 "PE0_RX_MSG_HDR_2,PCIe Controller 0 Receive Message Header 2" hexmask.long.byte 0x4 24.--31. 1. "MSG_HDR_BYTE4,Byte 4" newline hexmask.long.byte 0x4 16.--23. 1. "MSG_HDR_BYTE5,Byte 5" newline hexmask.long.byte 0x4 8.--15. 1. "MSG_HDR_BYTE6,Byte 6" newline hexmask.long.byte 0x4 0.--7. 1. "MSG_HDR_BYTE7,Byte 7" line.long 0x8 "PE0_RX_MSG_HDR_3,PCIe Controller 0 Receive Message Header 3" hexmask.long.byte 0x8 24.--31. 1. "MSG_HDR_BYTE8,Byte 8" newline hexmask.long.byte 0x8 16.--23. 1. "MSG_HDR_BYTE9,Byte 9" newline hexmask.long.byte 0x8 8.--15. 1. "MSG_HDR_BYTE10,Byte 10" newline hexmask.long.byte 0x8 0.--7. 1. "MSG_HDR_BYTE11,Byte 11" line.long 0xC "PE0_RX_MSG_HDR_4,PCIe Controller 0 Receive Message Header 4" hexmask.long.byte 0xC 24.--31. 1. "MSG_HDR_BYTE12,Byte 12" newline hexmask.long.byte 0xC 16.--23. 1. "MSG_HDR_BYTE13,Byte 13" newline hexmask.long.byte 0xC 8.--15. 1. "MSG_HDR_BYTE14,Byte 14" newline hexmask.long.byte 0xC 0.--7. 1. "MSG_HDR_BYTE15,Byte 15" group.long 0x10A0++0xB line.long 0x0 "PE0_RX_MSG_STS,PCIe Controller 0 Receive Message Status" eventfld.long 0x0 31. "MSGQ_OVERFLOW,Receive Message Queue Overflow Status" "0,1" newline eventfld.long 0x0 20. "UNLOCK_STS,Unlock Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 19. "PME_TURN_OFF_STS,PME_Turn_Off Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 18. "VDM_TYPE1_STS,Vendor-Defined Type 1 Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 17. "VDM_TYPE0_STS,Vendor-Defined Type 0 Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 12. "PM_PME_STS,PM_PME Message Status" "0: Not captured,1: Captured" newline eventfld.long 0x0 11. "PME_TO_ACK_STS,PME_TO_Ack message status" "0: Not captured,1: Captured" newline eventfld.long 0x0 1. "SET_SLOT_PWR_RCVD_STS,Set_Slot_Power_Limit message" "0: Message not received,1: Message received" newline eventfld.long 0x0 0. "LTR_MSG_RCVD_STS,LTR message receive indication" "0: No new LTR message is received,1: Controller has received and LTR message" line.long 0x4 "PE0_RX_MSG_CAP_CTRL,PCIe Controller 0 Receive Message Capture Control" bitfld.long 0x4 20. "CAP_UNLOCK,Capture Unlock message in received Message Header register." "0: Disable,1: Enable" newline bitfld.long 0x4 19. "CAP_PME_TURN_OFF,Capture PME_Turn_Off Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 18. "CAP_VDM_TYPE1,Capture Vendor-Defined Type 1 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 17. "CAP_VDM_TYPE0,Capture Vendor-Defined Type 0 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 16. "CAP_LTR_MSG,Received message header capture enable for LTR messages." "0: Disable Header capture,1: Enable capture enabled" newline bitfld.long 0x4 12. "CAP_PM_PME,Capture PM_PME Message In Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x4 11. "CAP_PME_TO_ACK,Capture PME_TO_Ack Message In Received Message Header Register" "0: Disable,1: Enable" line.long 0x8 "PE0_RX_MSG_INT_CTRL,PCIe Controller 0 Receive Message Interrupt Control" bitfld.long 0x8 31. "MSGQ_OVERFLOW_INT_EN,Interrupt Enable when Message Queue Overflows" "0: Disable,1: Enable" newline bitfld.long 0x8 20. "UNLOCK_INT_EN,Interrupt Enable when Unlock Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 19. "PME_TURN_OFF_INT_EN,Interrupt Enable when PME_Turn_Off Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 18. "VDM_TYPE1_INT_EN,Interrupt Enable when Vendor-Defined Type 1 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 17. "VDM_TYPE0_INT_EN,Interrupt Enable when Vendor-Defined Type 0 Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 12. "PM_PME_INT_EN,Interrupt Enable when PM_PME Message in Received Message Header Register" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "PME_TO_ACK_INT_EN,Interrupt Enable when PME_TO_Ack Message in Received Message Header Register" "0: Disable,1: Enable" rgroup.long 0x10B0++0x7 line.long 0x0 "PE0_LINK_DBG_1,PCIe Controller 0 Link Debug 1" bitfld.long 0x0 16. "SYMBOL_LOCK,Symbol Lock" "0,1" newline bitfld.long 0x0 0. "RECEIVER_DETECTED,Receiver Detected On Lanes" "0,1" line.long 0x4 "PE0_LINK_DBG_2,PCIe Controller 0 Link Debug 2" bitfld.long 0x4 24. "CDM_IN_RESET,CDM Register In Reset" "0: Not in reset or will not be reset,1: In reset or will be reset" newline bitfld.long 0x4 23. "BRDG_SLV_XFER_PENDING,AXI Slave Non-DBI Transfer Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 22. "BRDG_DBI_XFER_PENDING,AXI Slave DBI Transfer Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 21. "EDMA_XFER_PENDING,eDMA Transfer Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 20. "RADM_XFER_PENDING,Receive Request Pending Status" "0: No pending request,1: Pending request exists" newline bitfld.long 0x4 16. "VC0_Q_NOT_EMPTY,VC0 Queue Not Empty" "0: Empty,1: Not empty" newline bitfld.long 0x4 10.--12. "PHY_POWRDOWN,PHY Power State" "0: P0 (L0): Normal,1: P0s (L0s): Low recovery time power saving,2: P1 (L1): Longer recovery time additional power..,3: P2 (L2): Lowest power state,?,?,?,?" newline bitfld.long 0x4 8.--9. "RATE,Link Signaling Rate" "0: 2.5 GT/s,1: 5.0 GT/s,2: 8.0 GT/s,3: 16.0 GT/s" newline bitfld.long 0x4 7. "RDLH_LINK_UP,Data Link Layer Up or Down Indicator" "0,1" newline bitfld.long 0x4 6. "SMLH_LINK_UP,PHY Link Up or Down Indicator" "0: Down,1: Up" newline hexmask.long.byte 0x4 0.--5. 1. "SMLH_LTSSM_STATE,LTSSM State" rgroup.long 0x10C0++0x7 line.long 0x0 "PE0_AXI_MSTR_DBG_1,PCIe Controller 0 AXI Master Debug 1" hexmask.long.byte 0x0 24.--31. 1. "MSTR_WR_ERR,AXI Master Write Response Error Counter" newline hexmask.long.byte 0x0 16.--23. 1. "MSTR_WR_REQ_PEND,AXI Master Write Pending Request Counter" newline hexmask.long.word 0x0 0.--15. 1. "MSTR_WR_REQ,AXI Master Write Request Counter" line.long 0x4 "PE0_AXI_MSTR_DBG_2,PCIe Controller 0 AXI Master Debug 2" hexmask.long.byte 0x4 24.--31. 1. "MSTR_RD_ERR,AXI Master Read Response Error Counter" newline hexmask.long.byte 0x4 16.--23. 1. "MSTR_RD_REQ_PEND,AXI Master Read Pending Request Counter" newline hexmask.long.word 0x4 0.--15. 1. "MSTR_RD_REQ,AXI Master Read Request Counter" rgroup.long 0x10D0++0x7 line.long 0x0 "PE0_AXI_SLV_DBG_1,PCIe Controller 0 AXI Slave Debug 1" hexmask.long.byte 0x0 24.--31. 1. "SLV_WR_ERR,AXI Slave Write Response Error Counter" newline hexmask.long.byte 0x0 16.--23. 1. "SLV_WR_REQ_PEND,AXI Slave Write Pending Request Counter" newline hexmask.long.word 0x0 0.--15. 1. "SLV_WR_REQ,AXI Slave Write Request Counter" line.long 0x4 "PE0_AXI_SLV_DBG_2,PCIe Controller 0 AXI Slave Debug 2" hexmask.long.byte 0x4 24.--31. 1. "SLV_RD_ERR,AXI Slave Read Response Error Counter" newline hexmask.long.byte 0x4 16.--23. 1. "SLV_RD_REQ_PEND,AXI Slave Read Pending Request Counter" newline hexmask.long.word 0x4 0.--15. 1. "SLV_RD_REQ,AXI Slave Read Request Counter" group.long 0x10E0++0x13 line.long 0x0 "PE0_ERR_STS,PCIe Controller 0 Error Status" eventfld.long 0x0 31. "APBSLV_TIMEOUT_STS,APB Slave Timeout Error" "0: No timeout error detected,1: Timeout error detected" newline eventfld.long 0x0 30. "LINK_DOWN_STS,Link Down Event" "0: No link down error detected,1: Link down error detected" newline eventfld.long 0x0 28. "RMLH_DESKEW_ALIGNMENT_ERR,Deskew logic overflow." "0,1" newline eventfld.long 0x0 27. "SMLH_RCVD_LANE_REV,Receiver detected lane reversal." "0: No lane reversal detected,1: Lane reversal detected" newline eventfld.long 0x0 16. "VC_QOVERFLOW,RADM Queue Overflow Error" "0: No overflow error detected,1: Overflow error detected" newline eventfld.long 0x0 3. "XDLH_SMLH_START_LINK_RETRAIN,Received watchdog timer expired" "0: No link retrain request active,1: Link retrain request is active" newline eventfld.long 0x0 2. "RTLH_REQ_LINK_RETRAIN,Received watchdog timer expired" "0: Watchdog timer not expired,1: Watchdog timer expired" line.long 0x4 "PE0_ERR_INT_CTRL,PCIe Controller 0 Error Interrupt Control" bitfld.long 0x4 31. "APBSLV_TIMEOUT_INT_EN,Interrupt Enable for APB Slave Timeout Error" "0: Disable,1: Enable" newline bitfld.long 0x4 30. "LINK_DOWN_INT_EN,Interrupt Enable for Link Down Event" "0: Disable,1: Enable" newline bitfld.long 0x4 28. "RMLH_DESKEW_ALIGNMENT_ERR_INT_EN,Interrupt enable for PE0_ERR_STS[RMLH_DESKEW_ALIGNMENT_ERR]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 27. "SMLH_RCVD_LANE_REV_INT_EN,Interrupt enable for PE0_ERR_STS[SMLH_RCVD_LANE_REV]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 16. "VC_QOVERFLOW_INT_EN,Interrupt Enable for RADM Queue Overflow Error" "0: Disable,1: Enable" newline bitfld.long 0x4 7. "RXDATA_PERR_INT_EN,Interrupt Enable for Parity Error in the Receive Datapath" "0: Disable,1: Enable" newline bitfld.long 0x4 6. "TXDATA_PERR_BACK_INT_EN,Interrupt Enable for Parity Error at Back End of the Transmit Datapath" "0: Disable,1: Enable" newline bitfld.long 0x4 5. "TXDATA_PERR_FRONT_INT_EN,Interrupt Enable for Parity Error at Front End of the Transmit Datapath" "0: Disable,1: Enable" newline bitfld.long 0x4 4. "USP_EQ_REDO_EXECUTED_INT_EN,Enabled interrupt corresponding to USP_EQ_REDO_EXECUTED_INT_STAT" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 3. "XDLH_SMLH_START_LINK_RETRAIN_INT_EN,Interrupt enable for PE0_ERR_STS[XDLH_SMLH_START_LINK_RETRAIN]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 2. "RTLH_REQ_LINK_RETRAIN_INT_EN,Interrupt enable for PE0_ERR_STS[RTLH_REQ_LINK_RETRAIN]" "0: Interrupt Disabled,1: Interrupt Enabled" newline bitfld.long 0x4 1. "SET_SLOT_PWR_RCVD_INT_EN,Interrupt enable for SET_SLOT_PWR_RCVD" "0: Interrupt Disabled,1: Interrupt Enabled" line.long 0x8 "PE0_INT_STS,PCIe Controller 0 Interrupt Status" eventfld.long 0x8 29. "FLRIN_STS,FLR Interrupt Status" "0: No interrupt pending,1: Interrupt is pending" newline eventfld.long 0x8 24. "PM_LINKST_ENTR_L1SUB_STS,Indicates that the controller has entered in the L1 substate." "0,1" newline eventfld.long 0x8 13. "BW_MGT_MSI_STS,Link Bandwidth Management MSI Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 12. "LINK_AUTO_BW_MSI_STS,Link Autonomous Bandwidth MSI Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 10. "LINK_EQ_REQ_INT_STS,Link Equalization Request Interrupt Status" "0: LINK_CONTROL2_LINK_STATUS2_REG[PCIE_CAP_LINK_EQ_REQ] = 0 or LINK_CONTROL3_REG[EQ_REQ_INT_EN] = 0..,1: LINK_CONTROL2_LINK_STATUS2_REG[PCIE_CAP_LINK_EQ_REQ] = LINK_CONTROL3_REG[EQ_REQ_INT_EN] = 1.." newline eventfld.long 0x8 9. "BW_MGT_INT_STS,Link Bandwidth Management Interrupt Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 8. "LINK_AUTO_BW_INT_STS,Link Autonomous Bandwidth Interrupt Status" "0: The conditions in the field description are not..,1: The conditions in the field description are met" newline eventfld.long 0x8 7. "SYS_ERR_RC_STS,System Error Status" "0: No device reports any system error or the..,1: A device reports a system error and the.." newline eventfld.long 0x8 6. "HP_INT_STS,Hot-Plug Status" "0,1" newline eventfld.long 0x8 5. "PME_INT_STS,PME Interrupt Status" "0: ROOT_CONTROL_ROOT_CAPABILITIES_REG[PCIE_CAP_PME_INT_EN] = 0 or ROOT_STATUS_REG[PCIE_CAP_PME_STATUS] = 0..,1: ROOT_CONTROL_ROOT_CAPABILITIES_REG[PCIE_CAP_PME_INT_EN] = ROOT_STATUS_REG[PCIE_CAP_PME_STATUS] = 1.." newline eventfld.long 0x8 4. "AER_RC_ERR_INT_STS,Root Complex Advanced Error Reporting Status" "0: Fields in ROOT_ERR_STATUS_OFF are 0 or fields in..,1: A field in ROOT_ERR_STATUS_OFF is 1 and its.." newline eventfld.long 0x8 3. "USP_EQ_REDO_EXECUTED_INT_STAT,Interrupt indicating the EQ redo is executed by USP" "0: EQ Redo is executed,1: No EQ Redo executed" newline rbitfld.long 0x8 2. "ERR_INT_STS,Internal Error Interrupt Status" "0,1" newline rbitfld.long 0x8 1. "RX_MSG_INT_STS,Receive Message Interrupt Status" "0,1" line.long 0xC "PE0_MSI_GEN_CTRL,PCIe Controller 0 MSI Generation Control" hexmask.long 0xC 0.--31. 1. "MSI_INT,MSI Vector" line.long 0x10 "PE0_FSM_TRACK_1,PCIe Controller 0 FSM Track 1" rbitfld.long 0x10 31. "EVENT_B_3,TS2 Status in FSM State 3" "0: Not received,1: Received" newline rbitfld.long 0x10 30. "EVENT_A_3,TS1 Status in FSM State 3" "0: Not received,1: Received" newline hexmask.long.byte 0x10 24.--29. 1. "FSM_3,FSM State 3" newline rbitfld.long 0x10 23. "EVENT_B_2,TS2 Status In FSM State 2" "0: Not received,1: Received" newline rbitfld.long 0x10 22. "EVENT_A_2,TS1 Status In FSM State 2" "0: Not received,1: Received" newline hexmask.long.byte 0x10 16.--21. 1. "FSM_2,FSM State 2" newline rbitfld.long 0x10 15. "EVENT_B_1,TS2 Status In FSM State 1" "0: Not received,1: Received" newline rbitfld.long 0x10 14. "EVENT_A_1,TS1 Status In FSM State 1" "0: Not received,1: Received" newline hexmask.long.byte 0x10 8.--13. 1. "FSM_1,FSM State 1" newline bitfld.long 0x10 6. "FSM_MON_EN,FSM Track Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x10 0.--5. 1. "FSM_TRIG,Trigger State Of FSM Track" rgroup.long 0x10F4++0x3 line.long 0x0 "PE0_FSM_TRACK_2,PCIe Controller 0 FSM Track 2" bitfld.long 0x0 31. "EVENT_B_7,TS2 Status in FSM State 7" "0: Not received,1: Received" newline bitfld.long 0x0 30. "EVENT_A_7,TS1 Status in FSM State 7" "0: Not received,1: Received" newline hexmask.long.byte 0x0 24.--29. 1. "FSM_7,FSM State 7" newline bitfld.long 0x0 23. "EVENT_B_6,TS2 Status in FSM State 6" "0: Not received,1: Received" newline bitfld.long 0x0 22. "EVENT_A_6,TS1 Status in FSM State 6" "0: Not received,1: Received" newline hexmask.long.byte 0x0 16.--21. 1. "FSM_6,FSM State 6" newline bitfld.long 0x0 15. "EVENT_B_5,TS2 Status in FSM State 5" "0: Not received,1: Received" newline bitfld.long 0x0 14. "EVENT_A_5,TS1 Status in FSM State 5" "0: Not received,1: Received" newline hexmask.long.byte 0x0 8.--13. 1. "FSM_5,FSM State 5" newline bitfld.long 0x0 7. "EVENT_B_4,TS2 Status in FSM State 4" "0: Not received,1: Received" newline bitfld.long 0x0 6. "EVENT_A_4,TS1 Status in FSM State 4" "0: Not received,1: Received" newline hexmask.long.byte 0x0 0.--5. 1. "FSM_4,FSM State 4" group.long 0x3000++0x3 line.long 0x0 "APB_BRIDGE_TO_CTRL,APB Bridge Timeout Control" hexmask.long.word 0x0 16.--31. 1. "APB_TIMER_LIMT,APB Watchdog Timeout Threshold (us)" newline bitfld.long 0x0 10. "APB_TIMEOUT_DIS,APB Timeout Control Disable" "0: Enable,1: Disable" newline hexmask.long.word 0x0 0.--9. 1. "APBCLK_FREQ,APB Clock Frequency (MHz)" group.long 0x3008++0xB line.long 0x0 "PHY_REG_ADDR,PHY Register Address" bitfld.long 0x0 31. "PHY_REG_EN,Indirect PHY Register Access Enable" "0: Disable,1: Enable" newline hexmask.long.word 0x0 0.--15. 1. "ADDR,Indirect PHY Register Access Address" line.long 0x4 "PHY_REG_DATA,PHY Register Data" hexmask.long.word 0x4 0.--15. 1. "DATA,Indirect PHY Register Access Data" line.long 0x8 "RST_CTRL,Reset Control" bitfld.long 0x8 0. "COLD_RST,Cold Reset Control" "0: Deassert,1: Assert" tree.end tree.end tree "HSIO_TCU" base ad:0x4C000000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0x910++0x13 line.long 0x0 "tcu_pcie0_phy_control_,TCU PCIE0 PHY test control register" bitfld.long 0x0 4. "test_tx_ref_clk_en,Test ref clock enable" "0,1" bitfld.long 0x0 3. "test_stop_clk_en,Test stop clock" "0,1" bitfld.long 0x0 2. "test_powerdown,powers down all circuit" "0,1" bitfld.long 0x0 1. "test_burnin,testburnin functional for USB PHY stress test" "0,1" newline bitfld.long 0x0 0. "bs_ce,boundary scan enable" "0,1" line.long 0x4 "tcu_pcie0_phy_control__SET,TCU PCIE0 PHY test control register" bitfld.long 0x4 4. "test_tx_ref_clk_en,Test ref clock enable" "0,1" bitfld.long 0x4 3. "test_stop_clk_en,Test stop clock" "0,1" bitfld.long 0x4 2. "test_powerdown,powers down all circuit" "0,1" bitfld.long 0x4 1. "test_burnin,testburnin functional for USB PHY stress test" "0,1" newline bitfld.long 0x4 0. "bs_ce,boundary scan enable" "0,1" line.long 0x8 "tcu_pcie0_phy_control__CLR,TCU PCIE0 PHY test control register" eventfld.long 0x8 4. "test_tx_ref_clk_en,Test ref clock enable" "0,1" eventfld.long 0x8 3. "test_stop_clk_en,Test stop clock" "0,1" eventfld.long 0x8 2. "test_powerdown,powers down all circuit" "0,1" eventfld.long 0x8 1. "test_burnin,testburnin functional for USB PHY stress test" "0,1" newline eventfld.long 0x8 0. "bs_ce,boundary scan enable" "0,1" line.long 0xC "tcu_pcie0_phy_control__TOG,TCU PCIE0 PHY test control register" bitfld.long 0xC 4. "test_tx_ref_clk_en,Test ref clock enable" "0,1" bitfld.long 0xC 3. "test_stop_clk_en,Test stop clock" "0,1" bitfld.long 0xC 2. "test_powerdown,powers down all circuit" "0,1" bitfld.long 0xC 1. "test_burnin,testburnin functional for USB PHY stress test" "0,1" newline bitfld.long 0xC 0. "bs_ce,boundary scan enable" "0,1" line.long 0x10 "tcu_pcie1_phy_control_,TCU PCIE0 PHY test control register" bitfld.long 0x10 4. "test_tx_ref_clk_en,Ref test clock enable" "0,1" bitfld.long 0x10 3. "test_stop_clk_en,Test clock stop" "0,1" bitfld.long 0x10 2. "test_powerdown,enable signal for usb loopback test" "0,1" bitfld.long 0x10 1. "test_burnin,testburnin functional for USB PHY stress test" "0,1" newline bitfld.long 0x10 0. "bs_ce,boundary scan enable" "0,1" group.long 0xA10++0xF line.long 0x0 "tcu_usb2_phy_control_,TCU USB2 PHY control register" bitfld.long 0x0 30. "atereset,atereset for advanced USB test interface" "0,1" bitfld.long 0x0 29. "testdataoutsel,testdataoutsel for advanced USB test interface" "0,1" hexmask.long.byte 0x0 21.--28. 1. "testdatain,testdatain[7:0] for advanced USB test interface" hexmask.long.byte 0x0 17.--20. 1. "testaddr,testaddr[3:0] for advanced USB test interface" newline bitfld.long 0x0 16. "testclk,testclk for advanced USB test interface" "0,1" bitfld.long 0x0 5. "suspendm0,suspend mode" "0,1" bitfld.long 0x0 3.--4. "vatestenb,Analog probes selection" "0,1,2,3" bitfld.long 0x0 2. "loopbackenb,enable signal for usb loopback test" "0,1" newline bitfld.long 0x0 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" bitfld.long 0x0 0. "test_mode,usb_phy_test_mode" "0,1" line.long 0x4 "tcu_usb2_phy_control__SET,TCU USB2 PHY control register" bitfld.long 0x4 30. "atereset,atereset for advanced USB test interface" "0,1" bitfld.long 0x4 29. "testdataoutsel,testdataoutsel for advanced USB test interface" "0,1" hexmask.long.byte 0x4 21.--28. 1. "testdatain,testdatain[7:0] for advanced USB test interface" hexmask.long.byte 0x4 17.--20. 1. "testaddr,testaddr[3:0] for advanced USB test interface" newline bitfld.long 0x4 16. "testclk,testclk for advanced USB test interface" "0,1" bitfld.long 0x4 5. "suspendm0,suspend mode" "0,1" bitfld.long 0x4 3.--4. "vatestenb,Analog probes selection" "0,1,2,3" bitfld.long 0x4 2. "loopbackenb,enable signal for usb loopback test" "0,1" newline bitfld.long 0x4 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" bitfld.long 0x4 0. "test_mode,usb_phy_test_mode" "0,1" line.long 0x8 "tcu_usb2_phy_control__CLR,TCU USB2 PHY control register" eventfld.long 0x8 30. "atereset,atereset for advanced USB test interface" "0,1" eventfld.long 0x8 29. "testdataoutsel,testdataoutsel for advanced USB test interface" "0,1" hexmask.long.byte 0x8 21.--28. 1. "testdatain,testdatain[7:0] for advanced USB test interface" hexmask.long.byte 0x8 17.--20. 1. "testaddr,testaddr[3:0] for advanced USB test interface" newline eventfld.long 0x8 16. "testclk,testclk for advanced USB test interface" "0,1" eventfld.long 0x8 5. "suspendm0,suspend mode" "0,1" eventfld.long 0x8 3.--4. "vatestenb,Analog probes selection" "0,1,2,3" eventfld.long 0x8 2. "loopbackenb,enable signal for usb loopback test" "0,1" newline eventfld.long 0x8 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" eventfld.long 0x8 0. "test_mode,usb_phy_test_mode" "0,1" line.long 0xC "tcu_usb2_phy_control__TOG,TCU USB2 PHY control register" bitfld.long 0xC 30. "atereset,atereset for advanced USB test interface" "0,1" bitfld.long 0xC 29. "testdataoutsel,testdataoutsel for advanced USB test interface" "0,1" hexmask.long.byte 0xC 21.--28. 1. "testdatain,testdatain[7:0] for advanced USB test interface" hexmask.long.byte 0xC 17.--20. 1. "testaddr,testaddr[3:0] for advanced USB test interface" newline bitfld.long 0xC 16. "testclk,testclk for advanced USB test interface" "0,1" bitfld.long 0xC 5. "suspendm0,suspend mode" "0,1" bitfld.long 0xC 3.--4. "vatestenb,Analog probes selection" "0,1,2,3" bitfld.long 0xC 2. "loopbackenb,enable signal for usb loopback test" "0,1" newline bitfld.long 0xC 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" bitfld.long 0xC 0. "test_mode,usb_phy_test_mode" "0,1" rgroup.long 0xA20++0xF line.long 0x0 "usb2_phy_testdata,test data out for usb2" hexmask.long.byte 0x0 0.--3. 1. "out,bit output for status monitor" line.long 0x4 "usb2_phy_testdata_SET,test data out for usb2" hexmask.long.byte 0x4 0.--3. 1. "out,bit output for status monitor" line.long 0x8 "usb2_phy_testdata_CLR,test data out for usb2" hexmask.long.byte 0x8 0.--3. 1. "out,bit output for status monitor" line.long 0xC "usb2_phy_testdata_TOG,test data out for usb2" hexmask.long.byte 0xC 0.--3. 1. "out,bit output for status monitor" group.long 0xA30++0xF line.long 0x0 "tcu_usb3_phy_control_,TCU USB3 PHY control register" bitfld.long 0x0 30. "atereset,ate reset" "0,1" bitfld.long 0x0 5. "test_powerdown_ssp,SS power down" "0,1" bitfld.long 0x0 4. "test_powerdown_hsp,HS power down" "0,1" bitfld.long 0x0 3. "vatestenb,Analog probes selection" "0,1" newline bitfld.long 0x0 2. "loopbackenb,enable signal for usb loopback test" "0,1" bitfld.long 0x0 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" bitfld.long 0x0 0. "test_mode,usb_phy_test_mode" "0,1" line.long 0x4 "tcu_usb3_phy_control__SET,TCU USB3 PHY control register" bitfld.long 0x4 30. "atereset,ate reset" "0,1" bitfld.long 0x4 5. "test_powerdown_ssp,SS power down" "0,1" bitfld.long 0x4 4. "test_powerdown_hsp,HS power down" "0,1" bitfld.long 0x4 3. "vatestenb,Analog probes selection" "0,1" newline bitfld.long 0x4 2. "loopbackenb,enable signal for usb loopback test" "0,1" bitfld.long 0x4 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" bitfld.long 0x4 0. "test_mode,usb_phy_test_mode" "0,1" line.long 0x8 "tcu_usb3_phy_control__CLR,TCU USB3 PHY control register" eventfld.long 0x8 30. "atereset,ate reset" "0,1" eventfld.long 0x8 5. "test_powerdown_ssp,SS power down" "0,1" eventfld.long 0x8 4. "test_powerdown_hsp,HS power down" "0,1" eventfld.long 0x8 3. "vatestenb,Analog probes selection" "0,1" newline eventfld.long 0x8 2. "loopbackenb,enable signal for usb loopback test" "0,1" eventfld.long 0x8 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" eventfld.long 0x8 0. "test_mode,usb_phy_test_mode" "0,1" line.long 0xC "tcu_usb3_phy_control__TOG,TCU USB3 PHY control register" bitfld.long 0xC 30. "atereset,ate reset" "0,1" bitfld.long 0xC 5. "test_powerdown_ssp,SS power down" "0,1" bitfld.long 0xC 4. "test_powerdown_hsp,HS power down" "0,1" bitfld.long 0xC 3. "vatestenb,Analog probes selection" "0,1" newline bitfld.long 0xC 2. "loopbackenb,enable signal for usb loopback test" "0,1" bitfld.long 0xC 1. "testburnin,testburnin functional for USB PHY stress test" "0,1" bitfld.long 0xC 0. "test_mode,usb_phy_test_mode" "0,1" rgroup.long 0xA40++0xF line.long 0x0 "usb3_phy_testdata,test data out for usb3" hexmask.long.byte 0x0 0.--3. 1. "out,bit output for status monitor" line.long 0x4 "usb3_phy_testdata_SET,test data out for usb3" hexmask.long.byte 0x4 0.--3. 1. "out,bit output for status monitor" line.long 0x8 "usb3_phy_testdata_CLR,test data out for usb3" hexmask.long.byte 0x8 0.--3. 1. "out,bit output for status monitor" line.long 0xC "usb3_phy_testdata_TOG,test data out for usb3" hexmask.long.byte 0xC 0.--3. 1. "out,bit output for status monitor" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" tree.end tree "IEPRC_IERB" base ad:0x508A0000 repeat 2. (list 0x0 0x1)(list ad:0x508A0000 ad:0x508A0020) tree "BUSx[$1]" base $2 group.long ($2)++0xB line.long 0x0 "B_EC_F0_CFH_DIDVID,Bus n EC Function 0 config header device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device shown in the PCIe Device ID Register (02h)" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device as shown in the PCIe Vendor ID Register (00h)" line.long 0x4 "B_EC_F0_CFH_SIDSVID,Bus n EC Function 0 config header subsystem ID and subsystem vendor ID register" hexmask.long.word 0x4 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem Device ID This field identifies the particular subsystem as shown in the PCIe Subsystem ID Register (2Eh)" hexmask.long.word 0x4 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem Vendor ID This field identifies the manufacturer of the subsystem as shown in the PCIe Subsystem Vendor ID Register (2Ch)" line.long 0x8 "B_EC_F0_CFH_REVID,Bus n EC Function 0 config header revision register" hexmask.long.byte 0x8 0.--7. 1. "REVISION_ID,Revision ID This field identifies the revision ID of the device shown in the PCIe Revision ID Register (08h)" tree.end repeat.end base ad:0x508A0000 rgroup.long 0x2000++0x3 line.long 0x0 "CAP0,Capability 0 register" hexmask.long.byte 0x0 24.--30. 1. "NUM_RCEC,Number of RCECs (Event Collector) This field defines number of Event Collectors supported by iEPRC" hexmask.long.byte 0x0 16.--22. 1. "NUM_PCI_BUS,Number of PCIe Bus This field defines number of PCIe buses of ECAM space supported by iEPRC." bitfld.long 0x0 3. "INT_TYPE,Interrupt Type This field defines type of PCIe interrupt supported by iEP-RC" "0,1" bitfld.long 0x0 0.--2. "NUM_EP,Number of Integrated Endpoints This field defines number of Integrated Endpoints supported by iEPRC" "0,1,2,3,4,5,6,7" group.long 0x2010++0x3 line.long 0x0 "EC_CFG,EC Configuration register" hexmask.long.byte 0x0 3.--7. 1. "DEV_NUM,Device number This field defines PCI device number in ECAM space where RCEC function is placed on every bus" bitfld.long 0x0 0.--2. "FUNC_NUM,Function number This field defines PCI function number in ECAM space where RCEC function is placed on every bus" "0,1,2,3,4,5,6,7" tree.end tree "IEPRC_PCI" base ad:0x0 tree "IEPRC_B0_EC_F0_PCI_HDR_TYPE0" base ad:0x4CA08000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device" group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 10. "INTR_DISABLE,Interrupt disable Controls the ability of a Event Collector to generate INTx interrupts" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" bitfld.word 0x0 3. "INTR_STATUS,Interrupt Status When set indicates that an INTx interrupt is pending for the Event Collector" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the Root Complex contains multiple Event Collectors." "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This read only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This read only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" group.byte 0x3C++0x0 line.byte 0x0 "PCI_CFH_INT_LINE,PCI interrupt line register" hexmask.byte 0x0 0.--7. 1. "INT_LINE,Interrupt Line register communicates interrupt line routing information" rgroup.byte 0x3D++0x0 line.byte 0x0 "PCI_CFH_INT_PIN,PCI interrupt pin register" hexmask.byte 0x0 0.--7. 1. "INT_PIN,The Interrupt Pin register is a read-only register that identifies the legacy interrupt Message(s) the function uses" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability This bit applies to Endpoints only hardwired to 0b." "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending When set this bit indicates that the Event Collector has issued Non-Posted Requests that have not been completed" "0,1" group.word 0x5C++0x1 line.word 0x0 "PCI_CFC_PCIE_ROOT_CTL,PCI PCIe root control register" bitfld.word 0x0 3. "PME_INT_EN,PME interrupt enable When Set this bit enables PME interrupt generation upon receipt of a PME Message as reflected in the PME Status bit" "0,1" group.long 0x60++0x3 line.long 0x0 "PCI_CFC_PCIE_ROOT_STAT,PCI PCIe root status register" rbitfld.long 0x0 17. "PME_PEND,PME pending This bit indicates that another PME is pending when the PME Status bit is Set" "0,1" eventfld.long 0x0 16. "PME_STATUS,PME status This bit indicates that PME was asserted by the PME Requester indicated in the PME Requester ID field" "0,1" hexmask.long.word 0x0 0.--15. 1. "PME_REQ_ID,PME requester ID This field indicates the PCI Requester ID of the last PME Requester" rgroup.word 0x80++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Event Collector does not support generating PM_PME notifications hardwired to 00h." bitfld.word 0x2 0.--2. "VERSION,Version RCEC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x84++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when RCEC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by EC) 10b = D2 (not supported by EC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x87++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x12C++0x7 line.long 0x0 "PCIE_CFC_AER_ROOT_ERR_CMD,PCIe AER root error command register" bitfld.long 0x0 2. "FATAL_ERR_RPT_EN,Fatal error reporting enable When set this bit enables the generation of an interrupt when a fatal error is reported by any of the Integrated Endpoints (iEPs) or the Event Collector itself" "0,1" bitfld.long 0x0 1. "NON_FATAL_ERR_RPT_EN,Non-fatal error reporting enable When set this bit enables the generation of an interrupt when a non-fatal error is reported by any of the Integrated Endpoints (iEPs) or the Event Collector itself" "0,1" bitfld.long 0x0 0. "CORR_ERR_RPT_EN,Correctable error reporting enable When set this bit enables the generation of an interrupt when a correctable error is reported by any of the Integrated Endpoints (iEPs) or the Event Collector itself" "0,1" line.long 0x4 "PCIE_CFC_AER_ROOT_ERR_STAT,PCIe AER root error status register" eventfld.long 0x4 6. "ERR_FATAL,Fatal error received Set when one or more fatal uncorrectable error messages have been received" "0,1" eventfld.long 0x4 5. "ERR_NON_FATAL,Non-fatal error received Set when one or more non-fatal uncorrectable error messages have been received" "0,1" eventfld.long 0x4 4. "FIRST_UCORR_FATAL,First uncorrectable error fatal Set when the first uncorrectable error message received is for a fatal error" "0,1" newline eventfld.long 0x4 3. "MULT_ERR_FATAL_NON_FATAL,Multiple fatal/non-fatal errors received Set when either a fatal or a non-fatal error is received and ERR_FATAL_NON_FATAL received is already set" "0,1" eventfld.long 0x4 2. "ERR_FATAL_NON_FATAL,Fatal/Non-fatal error received Set when either a fatal or a non-fatal error message is received and this bit is not already set" "0,1" eventfld.long 0x4 1. "MULT_ERR_CORR,Multiple correctable errors received Set when a correctable error message is received and ERR_CORR received is already set" "0,1" newline eventfld.long 0x4 0. "ERR_CORR,Correctable error received Set when a correctable error message is received and this bit is not already set" "0,1" rgroup.long 0x134++0xB line.long 0x0 "PCIE_CFC_AER_ERR_SRC_ID,PCIe AER error source identification register" hexmask.long.word 0x0 16.--31. 1. "ERR_FATAL_NON_FATAL_SRC_ID,ERR_FATAL_NON_FATAL Source Identification Loaded with the Requester ID indicated in the received ERR_FATAL_NON_FATAL message when the ERR_FATAL_NON_FATAL received bit is not already set" hexmask.long.word 0x0 0.--15. 1. "ERR_CORR_SRC_ID,ERR_CORR Source Identification Loaded with the Requester ID indicated in the received ERR_CORR message when the ERR_CORR received bit is not already set" line.long 0x4 "PCIE_CFC_RCEC_EPA_EXT_CAP_HDR,PCIe RCEC Endpoint association extended capability header" hexmask.long.word 0x4 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x4 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x4 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Event Collector Endpoint Association Capability is 0007h." line.long 0x8 "PCIE_CFC_RCEC_EPA_BITMAP,PCIe RCEC Endpoint association bitmap register" hexmask.long 0x8 0.--31. 1. "DEV_BITMAP,Associated Endpoint device bitmap 31-0" tree.end tree "IEPRC_B1_EC_F0_PCI_HDR_TYPE0" base ad:0x4CB08000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device" group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 10. "INTR_DISABLE,Interrupt disable Controls the ability of a Event Collector to generate INTx interrupts" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" bitfld.word 0x0 3. "INTR_STATUS,Interrupt Status When set indicates that an INTx interrupt is pending for the Event Collector" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the Root Complex contains multiple Event Collectors." "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This read only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This read only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" group.byte 0x3C++0x0 line.byte 0x0 "PCI_CFH_INT_LINE,PCI interrupt line register" hexmask.byte 0x0 0.--7. 1. "INT_LINE,Interrupt Line register communicates interrupt line routing information" rgroup.byte 0x3D++0x0 line.byte 0x0 "PCI_CFH_INT_PIN,PCI interrupt pin register" hexmask.byte 0x0 0.--7. 1. "INT_PIN,The Interrupt Pin register is a read-only register that identifies the legacy interrupt Message(s) the function uses" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability This bit applies to Endpoints only hardwired to 0b." "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending When set this bit indicates that the Event Collector has issued Non-Posted Requests that have not been completed" "0,1" group.word 0x5C++0x1 line.word 0x0 "PCI_CFC_PCIE_ROOT_CTL,PCI PCIe root control register" bitfld.word 0x0 3. "PME_INT_EN,PME interrupt enable When Set this bit enables PME interrupt generation upon receipt of a PME Message as reflected in the PME Status bit" "0,1" group.long 0x60++0x3 line.long 0x0 "PCI_CFC_PCIE_ROOT_STAT,PCI PCIe root status register" rbitfld.long 0x0 17. "PME_PEND,PME pending This bit indicates that another PME is pending when the PME Status bit is Set" "0,1" eventfld.long 0x0 16. "PME_STATUS,PME status This bit indicates that PME was asserted by the PME Requester indicated in the PME Requester ID field" "0,1" hexmask.long.word 0x0 0.--15. 1. "PME_REQ_ID,PME requester ID This field indicates the PCI Requester ID of the last PME Requester" rgroup.word 0x80++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Event Collector does not support generating PM_PME notifications hardwired to 00h." bitfld.word 0x2 0.--2. "VERSION,Version RCEC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x84++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when RCEC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by EC) 10b = D2 (not supported by EC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x87++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x12C++0x7 line.long 0x0 "PCIE_CFC_AER_ROOT_ERR_CMD,PCIe AER root error command register" bitfld.long 0x0 2. "FATAL_ERR_RPT_EN,Fatal error reporting enable When set this bit enables the generation of an interrupt when a fatal error is reported by any of the Integrated Endpoints (iEPs) or the Event Collector itself" "0,1" bitfld.long 0x0 1. "NON_FATAL_ERR_RPT_EN,Non-fatal error reporting enable When set this bit enables the generation of an interrupt when a non-fatal error is reported by any of the Integrated Endpoints (iEPs) or the Event Collector itself" "0,1" bitfld.long 0x0 0. "CORR_ERR_RPT_EN,Correctable error reporting enable When set this bit enables the generation of an interrupt when a correctable error is reported by any of the Integrated Endpoints (iEPs) or the Event Collector itself" "0,1" line.long 0x4 "PCIE_CFC_AER_ROOT_ERR_STAT,PCIe AER root error status register" eventfld.long 0x4 6. "ERR_FATAL,Fatal error received Set when one or more fatal uncorrectable error messages have been received" "0,1" eventfld.long 0x4 5. "ERR_NON_FATAL,Non-fatal error received Set when one or more non-fatal uncorrectable error messages have been received" "0,1" eventfld.long 0x4 4. "FIRST_UCORR_FATAL,First uncorrectable error fatal Set when the first uncorrectable error message received is for a fatal error" "0,1" newline eventfld.long 0x4 3. "MULT_ERR_FATAL_NON_FATAL,Multiple fatal/non-fatal errors received Set when either a fatal or a non-fatal error is received and ERR_FATAL_NON_FATAL received is already set" "0,1" eventfld.long 0x4 2. "ERR_FATAL_NON_FATAL,Fatal/Non-fatal error received Set when either a fatal or a non-fatal error message is received and this bit is not already set" "0,1" eventfld.long 0x4 1. "MULT_ERR_CORR,Multiple correctable errors received Set when a correctable error message is received and ERR_CORR received is already set" "0,1" newline eventfld.long 0x4 0. "ERR_CORR,Correctable error received Set when a correctable error message is received and this bit is not already set" "0,1" rgroup.long 0x134++0xB line.long 0x0 "PCIE_CFC_AER_ERR_SRC_ID,PCIe AER error source identification register" hexmask.long.word 0x0 16.--31. 1. "ERR_FATAL_NON_FATAL_SRC_ID,ERR_FATAL_NON_FATAL Source Identification Loaded with the Requester ID indicated in the received ERR_FATAL_NON_FATAL message when the ERR_FATAL_NON_FATAL received bit is not already set" hexmask.long.word 0x0 0.--15. 1. "ERR_CORR_SRC_ID,ERR_CORR Source Identification Loaded with the Requester ID indicated in the received ERR_CORR message when the ERR_CORR received bit is not already set" line.long 0x4 "PCIE_CFC_RCEC_EPA_EXT_CAP_HDR,PCIe RCEC Endpoint association extended capability header" hexmask.long.word 0x4 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x4 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x4 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Event Collector Endpoint Association Capability is 0007h." line.long 0x8 "PCIE_CFC_RCEC_EPA_BITMAP,PCIe RCEC Endpoint association bitmap register" hexmask.long 0x8 0.--31. 1. "DEV_BITMAP,Associated Endpoint device bitmap 31-0" tree.end tree.end tree "IEPRC_PRB" base ad:0x508C0000 group.long 0x0++0x3 line.long 0x0 "RR,Reset register" bitfld.long 0x0 1. "LOCK,Lock" "0,1" bitfld.long 0x0 0. "SR,Soft reset" "0,1" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "EC_RR[$1],EC Reset register" bitfld.long 0x0 0. "ECSR,EC Soft reset" "0,1" repeat.end tree.end tree "IOMUXC" base ad:0x443C0000 group.long 0x0++0x5FB line.long 0x0 "SW_MUX_CTL_PAD_DAP_TDI,SW_MUX_CTL_PAD_DAP_TDI SW MUX Control Register" bitfld.long 0x0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad DAP_TDI" newline bitfld.long 0x0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port: JTAG_MUX_TDI of..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x4 "SW_MUX_CTL_PAD_DAP_TMS_SWDIO,SW_MUX_CTL_PAD_DAP_TMS_SWDIO SW MUX Control Register" bitfld.long 0x4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad DAP_TMS_SWDIO" newline bitfld.long 0x4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port: JTAG_MUX_TMS of..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x8 "SW_MUX_CTL_PAD_DAP_TCLK_SWCLK,SW_MUX_CTL_PAD_DAP_TCLK_SWCLK SW MUX Control Register" bitfld.long 0x8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad DAP_TCLK_SWCLK" newline bitfld.long 0x8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port: JTAG_MUX_TCK of..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0xC "SW_MUX_CTL_PAD_DAP_TDO_TRACESWO,SW_MUX_CTL_PAD_DAP_TDO_TRACESWO SW MUX Control Register" bitfld.long 0xC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad DAP_TDO_TRACESWO" newline bitfld.long 0xC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port: JTAG_MUX_TDO of..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x10 "SW_MUX_CTL_PAD_GPIO_IO00,SW_MUX_CTL_PAD_GPIO_IO00 SW MUX Control Register" bitfld.long 0x10 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO00" newline bitfld.long 0x10 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x14 "SW_MUX_CTL_PAD_GPIO_IO01,SW_MUX_CTL_PAD_GPIO_IO01 SW MUX Control Register" bitfld.long 0x14 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO01" newline bitfld.long 0x14 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x18 "SW_MUX_CTL_PAD_GPIO_IO02,SW_MUX_CTL_PAD_GPIO_IO02 SW MUX Control Register" bitfld.long 0x18 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO02" newline bitfld.long 0x18 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x1C "SW_MUX_CTL_PAD_GPIO_IO03,SW_MUX_CTL_PAD_GPIO_IO03 SW MUX Control Register" bitfld.long 0x1C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO03" newline bitfld.long 0x1C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x20 "SW_MUX_CTL_PAD_GPIO_IO04,SW_MUX_CTL_PAD_GPIO_IO04 SW MUX Control Register" bitfld.long 0x20 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO04" newline bitfld.long 0x20 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x24 "SW_MUX_CTL_PAD_GPIO_IO05,SW_MUX_CTL_PAD_GPIO_IO05 SW MUX Control Register" bitfld.long 0x24 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO05" newline bitfld.long 0x24 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x28 "SW_MUX_CTL_PAD_GPIO_IO06,SW_MUX_CTL_PAD_GPIO_IO06 SW MUX Control Register" bitfld.long 0x28 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO06" newline bitfld.long 0x28 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x2C "SW_MUX_CTL_PAD_GPIO_IO07,SW_MUX_CTL_PAD_GPIO_IO07 SW MUX Control Register" bitfld.long 0x2C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO07" newline bitfld.long 0x2C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x30 "SW_MUX_CTL_PAD_GPIO_IO08,SW_MUX_CTL_PAD_GPIO_IO08 SW MUX Control Register" bitfld.long 0x30 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO08" newline bitfld.long 0x30 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x34 "SW_MUX_CTL_PAD_GPIO_IO09,SW_MUX_CTL_PAD_GPIO_IO09 SW MUX Control Register" bitfld.long 0x34 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO09" newline bitfld.long 0x34 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x38 "SW_MUX_CTL_PAD_GPIO_IO10,SW_MUX_CTL_PAD_GPIO_IO10 SW MUX Control Register" bitfld.long 0x38 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO10" newline bitfld.long 0x38 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x3C "SW_MUX_CTL_PAD_GPIO_IO11,SW_MUX_CTL_PAD_GPIO_IO11 SW MUX Control Register" bitfld.long 0x3C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO11" newline bitfld.long 0x3C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x40 "SW_MUX_CTL_PAD_GPIO_IO12,SW_MUX_CTL_PAD_GPIO_IO12 SW MUX Control Register" bitfld.long 0x40 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO12" newline bitfld.long 0x40 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x44 "SW_MUX_CTL_PAD_GPIO_IO13,SW_MUX_CTL_PAD_GPIO_IO13 SW MUX Control Register" bitfld.long 0x44 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO13" newline bitfld.long 0x44 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x48 "SW_MUX_CTL_PAD_GPIO_IO14,SW_MUX_CTL_PAD_GPIO_IO14 SW MUX Control Register" bitfld.long 0x48 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO14" newline bitfld.long 0x48 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x4C "SW_MUX_CTL_PAD_GPIO_IO15,SW_MUX_CTL_PAD_GPIO_IO15 SW MUX Control Register" bitfld.long 0x4C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO15" newline bitfld.long 0x4C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x50 "SW_MUX_CTL_PAD_GPIO_IO16,SW_MUX_CTL_PAD_GPIO_IO16 SW MUX Control Register" bitfld.long 0x50 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO16" newline bitfld.long 0x50 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x54 "SW_MUX_CTL_PAD_GPIO_IO17,SW_MUX_CTL_PAD_GPIO_IO17 SW MUX Control Register" bitfld.long 0x54 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO17" newline bitfld.long 0x54 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x58 "SW_MUX_CTL_PAD_GPIO_IO18,SW_MUX_CTL_PAD_GPIO_IO18 SW MUX Control Register" bitfld.long 0x58 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO18" newline bitfld.long 0x58 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x5C "SW_MUX_CTL_PAD_GPIO_IO19,SW_MUX_CTL_PAD_GPIO_IO19 SW MUX Control Register" bitfld.long 0x5C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO19" newline bitfld.long 0x5C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x60 "SW_MUX_CTL_PAD_GPIO_IO20,SW_MUX_CTL_PAD_GPIO_IO20 SW MUX Control Register" bitfld.long 0x60 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO20" newline bitfld.long 0x60 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x64 "SW_MUX_CTL_PAD_GPIO_IO21,SW_MUX_CTL_PAD_GPIO_IO21 SW MUX Control Register" bitfld.long 0x64 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO21" newline bitfld.long 0x64 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x68 "SW_MUX_CTL_PAD_GPIO_IO22,SW_MUX_CTL_PAD_GPIO_IO22 SW MUX Control Register" bitfld.long 0x68 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO22" newline bitfld.long 0x68 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x6C "SW_MUX_CTL_PAD_GPIO_IO23,SW_MUX_CTL_PAD_GPIO_IO23 SW MUX Control Register" bitfld.long 0x6C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO23" newline bitfld.long 0x6C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,?,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x70 "SW_MUX_CTL_PAD_GPIO_IO24,SW_MUX_CTL_PAD_GPIO_IO24 SW MUX Control Register" bitfld.long 0x70 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO24" newline bitfld.long 0x70 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port: JTAG_MUX_TDO of..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x74 "SW_MUX_CTL_PAD_GPIO_IO25,SW_MUX_CTL_PAD_GPIO_IO25 SW MUX Control Register" bitfld.long 0x74 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO25" newline bitfld.long 0x74 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port: JTAG_MUX_TCK of..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x78 "SW_MUX_CTL_PAD_GPIO_IO26,SW_MUX_CTL_PAD_GPIO_IO26 SW MUX Control Register" bitfld.long 0x78 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO26" newline bitfld.long 0x78 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port: JTAG_MUX_TDI of..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x7C "SW_MUX_CTL_PAD_GPIO_IO27,SW_MUX_CTL_PAD_GPIO_IO27 SW MUX Control Register" bitfld.long 0x7C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO27" newline bitfld.long 0x7C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port: JTAG_MUX_TMS of..,6: Select mux mode: ALT6 mux port:..,7: Select mux mode: ALT7 mux port:.." line.long 0x80 "SW_MUX_CTL_PAD_GPIO_IO28,SW_MUX_CTL_PAD_GPIO_IO28 SW MUX Control Register" bitfld.long 0x80 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO28" newline bitfld.long 0x80 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,?,?,?,7: Select mux mode: ALT7 mux port:.." line.long 0x84 "SW_MUX_CTL_PAD_GPIO_IO29,SW_MUX_CTL_PAD_GPIO_IO29 SW MUX Control Register" bitfld.long 0x84 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO29" newline bitfld.long 0x84 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,?,?,?,7: Select mux mode: ALT7 mux port:.." line.long 0x88 "SW_MUX_CTL_PAD_GPIO_IO30,SW_MUX_CTL_PAD_GPIO_IO30 SW MUX Control Register" bitfld.long 0x88 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO30" newline bitfld.long 0x88 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,?,?,?,7: Select mux mode: ALT7 mux port:.." line.long 0x8C "SW_MUX_CTL_PAD_GPIO_IO31,SW_MUX_CTL_PAD_GPIO_IO31 SW MUX Control Register" bitfld.long 0x8C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO31" newline bitfld.long 0x8C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,?,?,?,7: Select mux mode: ALT7 mux port:.." line.long 0x90 "SW_MUX_CTL_PAD_GPIO_IO32,SW_MUX_CTL_PAD_GPIO_IO32 SW MUX Control Register" bitfld.long 0x90 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO32" newline bitfld.long 0x90 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,?,?,?" line.long 0x94 "SW_MUX_CTL_PAD_GPIO_IO33,SW_MUX_CTL_PAD_GPIO_IO33 SW MUX Control Register" bitfld.long 0x94 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO33" newline bitfld.long 0x94 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,?,?,?" line.long 0x98 "SW_MUX_CTL_PAD_GPIO_IO34,SW_MUX_CTL_PAD_GPIO_IO34 SW MUX Control Register" bitfld.long 0x98 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO34" newline bitfld.long 0x98 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,?,?,?" line.long 0x9C "SW_MUX_CTL_PAD_GPIO_IO35,SW_MUX_CTL_PAD_GPIO_IO35 SW MUX Control Register" bitfld.long 0x9C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO35" newline bitfld.long 0x9C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,?,?,?" line.long 0xA0 "SW_MUX_CTL_PAD_GPIO_IO36,SW_MUX_CTL_PAD_GPIO_IO36 SW MUX Control Register" bitfld.long 0xA0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO36" newline bitfld.long 0xA0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,?,?,?" line.long 0xA4 "SW_MUX_CTL_PAD_GPIO_IO37,SW_MUX_CTL_PAD_GPIO_IO37 SW MUX Control Register" bitfld.long 0xA4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad GPIO_IO37" newline bitfld.long 0xA4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,?,?,?" line.long 0xA8 "SW_MUX_CTL_PAD_CCM_CLKO1,SW_MUX_CTL_PAD_CCM_CLKO1 SW MUX Control Register" bitfld.long 0xA8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad CCM_CLKO1" newline bitfld.long 0xA8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xAC "SW_MUX_CTL_PAD_CCM_CLKO2,SW_MUX_CTL_PAD_CCM_CLKO2 SW MUX Control Register" bitfld.long 0xAC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad CCM_CLKO2" newline bitfld.long 0xAC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xB0 "SW_MUX_CTL_PAD_CCM_CLKO3,SW_MUX_CTL_PAD_CCM_CLKO3 SW MUX Control Register" bitfld.long 0xB0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad CCM_CLKO3" newline bitfld.long 0xB0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xB4 "SW_MUX_CTL_PAD_CCM_CLKO4,SW_MUX_CTL_PAD_CCM_CLKO4 SW MUX Control Register" bitfld.long 0xB4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad CCM_CLKO4" newline bitfld.long 0xB4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xB8 "SW_MUX_CTL_PAD_ENET1_MDC,SW_MUX_CTL_PAD_ENET1_MDC SW MUX Control Register" bitfld.long 0xB8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_MDC" newline bitfld.long 0xB8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xBC "SW_MUX_CTL_PAD_ENET1_MDIO,SW_MUX_CTL_PAD_ENET1_MDIO SW MUX Control Register" bitfld.long 0xBC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_MDIO" newline bitfld.long 0xBC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xC0 "SW_MUX_CTL_PAD_ENET1_TD3,SW_MUX_CTL_PAD_ENET1_TD3 SW MUX Control Register" bitfld.long 0xC0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_TD3" newline bitfld.long 0xC0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xC4 "SW_MUX_CTL_PAD_ENET1_TD2,SW_MUX_CTL_PAD_ENET1_TD2 SW MUX Control Register" bitfld.long 0xC4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_TD2" newline bitfld.long 0xC4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xC8 "SW_MUX_CTL_PAD_ENET1_TD1,SW_MUX_CTL_PAD_ENET1_TD1 SW MUX Control Register" bitfld.long 0xC8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_TD1" newline bitfld.long 0xC8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0xCC "SW_MUX_CTL_PAD_ENET1_TD0,SW_MUX_CTL_PAD_ENET1_TD0 SW MUX Control Register" bitfld.long 0xCC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_TD0" newline bitfld.long 0xCC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xD0 "SW_MUX_CTL_PAD_ENET1_TX_CTL,SW_MUX_CTL_PAD_ENET1_TX_CTL SW MUX Control Register" bitfld.long 0xD0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_TX_CTL" newline bitfld.long 0xD0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xD4 "SW_MUX_CTL_PAD_ENET1_TXC,SW_MUX_CTL_PAD_ENET1_TXC SW MUX Control Register" bitfld.long 0xD4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_TXC" newline bitfld.long 0xD4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xD8 "SW_MUX_CTL_PAD_ENET1_RX_CTL,SW_MUX_CTL_PAD_ENET1_RX_CTL SW MUX Control Register" bitfld.long 0xD8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_RX_CTL" newline bitfld.long 0xD8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xDC "SW_MUX_CTL_PAD_ENET1_RXC,SW_MUX_CTL_PAD_ENET1_RXC SW MUX Control Register" bitfld.long 0xDC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_RXC" newline bitfld.long 0xDC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xE0 "SW_MUX_CTL_PAD_ENET1_RD0,SW_MUX_CTL_PAD_ENET1_RD0 SW MUX Control Register" bitfld.long 0xE0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_RD0" newline bitfld.long 0xE0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xE4 "SW_MUX_CTL_PAD_ENET1_RD1,SW_MUX_CTL_PAD_ENET1_RD1 SW MUX Control Register" bitfld.long 0xE4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_RD1" newline bitfld.long 0xE4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xE8 "SW_MUX_CTL_PAD_ENET1_RD2,SW_MUX_CTL_PAD_ENET1_RD2 SW MUX Control Register" bitfld.long 0xE8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_RD2" newline bitfld.long 0xE8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xEC "SW_MUX_CTL_PAD_ENET1_RD3,SW_MUX_CTL_PAD_ENET1_RD3 SW MUX Control Register" bitfld.long 0xEC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET1_RD3" newline bitfld.long 0xEC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xF0 "SW_MUX_CTL_PAD_ENET2_MDC,SW_MUX_CTL_PAD_ENET2_MDC SW MUX Control Register" bitfld.long 0xF0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_MDC" newline bitfld.long 0xF0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xF4 "SW_MUX_CTL_PAD_ENET2_MDIO,SW_MUX_CTL_PAD_ENET2_MDIO SW MUX Control Register" bitfld.long 0xF4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_MDIO" newline bitfld.long 0xF4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xF8 "SW_MUX_CTL_PAD_ENET2_TD3,SW_MUX_CTL_PAD_ENET2_TD3 SW MUX Control Register" bitfld.long 0xF8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_TD3" newline bitfld.long 0xF8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0xFC "SW_MUX_CTL_PAD_ENET2_TD2,SW_MUX_CTL_PAD_ENET2_TD2 SW MUX Control Register" bitfld.long 0xFC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_TD2" newline bitfld.long 0xFC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x100 "SW_MUX_CTL_PAD_ENET2_TD1,SW_MUX_CTL_PAD_ENET2_TD1 SW MUX Control Register" bitfld.long 0x100 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_TD1" newline bitfld.long 0x100 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x104 "SW_MUX_CTL_PAD_ENET2_TD0,SW_MUX_CTL_PAD_ENET2_TD0 SW MUX Control Register" bitfld.long 0x104 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_TD0" newline bitfld.long 0x104 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x108 "SW_MUX_CTL_PAD_ENET2_TX_CTL,SW_MUX_CTL_PAD_ENET2_TX_CTL SW MUX Control Register" bitfld.long 0x108 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_TX_CTL" newline bitfld.long 0x108 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x10C "SW_MUX_CTL_PAD_ENET2_TXC,SW_MUX_CTL_PAD_ENET2_TXC SW MUX Control Register" bitfld.long 0x10C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_TXC" newline bitfld.long 0x10C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x110 "SW_MUX_CTL_PAD_ENET2_RX_CTL,SW_MUX_CTL_PAD_ENET2_RX_CTL SW MUX Control Register" bitfld.long 0x110 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_RX_CTL" newline bitfld.long 0x110 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x114 "SW_MUX_CTL_PAD_ENET2_RXC,SW_MUX_CTL_PAD_ENET2_RXC SW MUX Control Register" bitfld.long 0x114 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_RXC" newline bitfld.long 0x114 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x118 "SW_MUX_CTL_PAD_ENET2_RD0,SW_MUX_CTL_PAD_ENET2_RD0 SW MUX Control Register" bitfld.long 0x118 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_RD0" newline bitfld.long 0x118 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x11C "SW_MUX_CTL_PAD_ENET2_RD1,SW_MUX_CTL_PAD_ENET2_RD1 SW MUX Control Register" bitfld.long 0x11C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_RD1" newline bitfld.long 0x11C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x120 "SW_MUX_CTL_PAD_ENET2_RD2,SW_MUX_CTL_PAD_ENET2_RD2 SW MUX Control Register" bitfld.long 0x120 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_RD2" newline bitfld.long 0x120 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x124 "SW_MUX_CTL_PAD_ENET2_RD3,SW_MUX_CTL_PAD_ENET2_RD3 SW MUX Control Register" bitfld.long 0x124 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad ENET2_RD3" newline bitfld.long 0x124 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x128 "SW_MUX_CTL_PAD_SD1_CLK,SW_MUX_CTL_PAD_SD1_CLK SW MUX Control Register" bitfld.long 0x128 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_CLK" newline bitfld.long 0x128 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x12C "SW_MUX_CTL_PAD_SD1_CMD,SW_MUX_CTL_PAD_SD1_CMD SW MUX Control Register" bitfld.long 0x12C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_CMD" newline bitfld.long 0x12C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x130 "SW_MUX_CTL_PAD_SD1_DATA0,SW_MUX_CTL_PAD_SD1_DATA0 SW MUX Control Register" bitfld.long 0x130 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA0" newline bitfld.long 0x130 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x134 "SW_MUX_CTL_PAD_SD1_DATA1,SW_MUX_CTL_PAD_SD1_DATA1 SW MUX Control Register" bitfld.long 0x134 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA1" newline bitfld.long 0x134 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x138 "SW_MUX_CTL_PAD_SD1_DATA2,SW_MUX_CTL_PAD_SD1_DATA2 SW MUX Control Register" bitfld.long 0x138 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA2" newline bitfld.long 0x138 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x13C "SW_MUX_CTL_PAD_SD1_DATA3,SW_MUX_CTL_PAD_SD1_DATA3 SW MUX Control Register" bitfld.long 0x13C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA3" newline bitfld.long 0x13C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x140 "SW_MUX_CTL_PAD_SD1_DATA4,SW_MUX_CTL_PAD_SD1_DATA4 SW MUX Control Register" bitfld.long 0x140 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA4" newline bitfld.long 0x140 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x144 "SW_MUX_CTL_PAD_SD1_DATA5,SW_MUX_CTL_PAD_SD1_DATA5 SW MUX Control Register" bitfld.long 0x144 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA5" newline bitfld.long 0x144 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x148 "SW_MUX_CTL_PAD_SD1_DATA6,SW_MUX_CTL_PAD_SD1_DATA6 SW MUX Control Register" bitfld.long 0x148 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA6" newline bitfld.long 0x148 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x14C "SW_MUX_CTL_PAD_SD1_DATA7,SW_MUX_CTL_PAD_SD1_DATA7 SW MUX Control Register" bitfld.long 0x14C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_DATA7" newline bitfld.long 0x14C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x150 "SW_MUX_CTL_PAD_SD1_STROBE,SW_MUX_CTL_PAD_SD1_STROBE SW MUX Control Register" bitfld.long 0x150 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD1_STROBE" newline bitfld.long 0x150 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x154 "SW_MUX_CTL_PAD_SD2_VSELECT,SW_MUX_CTL_PAD_SD2_VSELECT SW MUX Control Register" bitfld.long 0x154 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_VSELECT" newline bitfld.long 0x154 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x158 "SW_MUX_CTL_PAD_SD3_CLK,SW_MUX_CTL_PAD_SD3_CLK SW MUX Control Register" bitfld.long 0x158 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD3_CLK" newline bitfld.long 0x158 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x15C "SW_MUX_CTL_PAD_SD3_CMD,SW_MUX_CTL_PAD_SD3_CMD SW MUX Control Register" bitfld.long 0x15C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD3_CMD" newline bitfld.long 0x15C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x160 "SW_MUX_CTL_PAD_SD3_DATA0,SW_MUX_CTL_PAD_SD3_DATA0 SW MUX Control Register" bitfld.long 0x160 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD3_DATA0" newline bitfld.long 0x160 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x164 "SW_MUX_CTL_PAD_SD3_DATA1,SW_MUX_CTL_PAD_SD3_DATA1 SW MUX Control Register" bitfld.long 0x164 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD3_DATA1" newline bitfld.long 0x164 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x168 "SW_MUX_CTL_PAD_SD3_DATA2,SW_MUX_CTL_PAD_SD3_DATA2 SW MUX Control Register" bitfld.long 0x168 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD3_DATA2" newline bitfld.long 0x168 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x16C "SW_MUX_CTL_PAD_SD3_DATA3,SW_MUX_CTL_PAD_SD3_DATA3 SW MUX Control Register" bitfld.long 0x16C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD3_DATA3" newline bitfld.long 0x16C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x170 "SW_MUX_CTL_PAD_XSPI1_DATA0,SW_MUX_CTL_PAD_XSPI1_DATA0 SW MUX Control Register" bitfld.long 0x170 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA0" newline bitfld.long 0x170 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x174 "SW_MUX_CTL_PAD_XSPI1_DATA1,SW_MUX_CTL_PAD_XSPI1_DATA1 SW MUX Control Register" bitfld.long 0x174 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA1" newline bitfld.long 0x174 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x178 "SW_MUX_CTL_PAD_XSPI1_DATA2,SW_MUX_CTL_PAD_XSPI1_DATA2 SW MUX Control Register" bitfld.long 0x178 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA2" newline bitfld.long 0x178 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x17C "SW_MUX_CTL_PAD_XSPI1_DATA3,SW_MUX_CTL_PAD_XSPI1_DATA3 SW MUX Control Register" bitfld.long 0x17C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA3" newline bitfld.long 0x17C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x180 "SW_MUX_CTL_PAD_XSPI1_DATA4,SW_MUX_CTL_PAD_XSPI1_DATA4 SW MUX Control Register" bitfld.long 0x180 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA4" newline bitfld.long 0x180 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x184 "SW_MUX_CTL_PAD_XSPI1_DATA5,SW_MUX_CTL_PAD_XSPI1_DATA5 SW MUX Control Register" bitfld.long 0x184 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA5" newline bitfld.long 0x184 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x188 "SW_MUX_CTL_PAD_XSPI1_DATA6,SW_MUX_CTL_PAD_XSPI1_DATA6 SW MUX Control Register" bitfld.long 0x188 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA6" newline bitfld.long 0x188 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x18C "SW_MUX_CTL_PAD_XSPI1_DATA7,SW_MUX_CTL_PAD_XSPI1_DATA7 SW MUX Control Register" bitfld.long 0x18C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DATA7" newline bitfld.long 0x18C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x190 "SW_MUX_CTL_PAD_XSPI1_DQS,SW_MUX_CTL_PAD_XSPI1_DQS SW MUX Control Register" bitfld.long 0x190 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_DQS" newline bitfld.long 0x190 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x194 "SW_MUX_CTL_PAD_XSPI1_SCLK,SW_MUX_CTL_PAD_XSPI1_SCLK SW MUX Control Register" bitfld.long 0x194 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_SCLK" newline bitfld.long 0x194 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x198 "SW_MUX_CTL_PAD_XSPI1_SS0_B,SW_MUX_CTL_PAD_XSPI1_SS0_B SW MUX Control Register" bitfld.long 0x198 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_SS0_B" newline bitfld.long 0x198 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x19C "SW_MUX_CTL_PAD_XSPI1_SS1_B,SW_MUX_CTL_PAD_XSPI1_SS1_B SW MUX Control Register" bitfld.long 0x19C 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad XSPI1_SS1_B" newline bitfld.long 0x19C 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,?,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1A0 "SW_MUX_CTL_PAD_SD2_CD_B,SW_MUX_CTL_PAD_SD2_CD_B SW MUX Control Register" bitfld.long 0x1A0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_CD_B" newline bitfld.long 0x1A0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1A4 "SW_MUX_CTL_PAD_SD2_CLK,SW_MUX_CTL_PAD_SD2_CLK SW MUX Control Register" bitfld.long 0x1A4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_CLK" newline bitfld.long 0x1A4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1A8 "SW_MUX_CTL_PAD_SD2_CMD,SW_MUX_CTL_PAD_SD2_CMD SW MUX Control Register" bitfld.long 0x1A8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_CMD" newline bitfld.long 0x1A8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1AC "SW_MUX_CTL_PAD_SD2_DATA0,SW_MUX_CTL_PAD_SD2_DATA0 SW MUX Control Register" bitfld.long 0x1AC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_DATA0" newline bitfld.long 0x1AC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1B0 "SW_MUX_CTL_PAD_SD2_DATA1,SW_MUX_CTL_PAD_SD2_DATA1 SW MUX Control Register" bitfld.long 0x1B0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_DATA1" newline bitfld.long 0x1B0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1B4 "SW_MUX_CTL_PAD_SD2_DATA2,SW_MUX_CTL_PAD_SD2_DATA2 SW MUX Control Register" bitfld.long 0x1B4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_DATA2" newline bitfld.long 0x1B4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1B8 "SW_MUX_CTL_PAD_SD2_DATA3,SW_MUX_CTL_PAD_SD2_DATA3 SW MUX Control Register" bitfld.long 0x1B8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_DATA3" newline bitfld.long 0x1B8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1BC "SW_MUX_CTL_PAD_SD2_RESET_B,SW_MUX_CTL_PAD_SD2_RESET_B SW MUX Control Register" bitfld.long 0x1BC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SD2_RESET_B" newline bitfld.long 0x1BC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1C0 "SW_MUX_CTL_PAD_I2C1_SCL,SW_MUX_CTL_PAD_I2C1_SCL SW MUX Control Register" bitfld.long 0x1C0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad I2C1_SCL" newline bitfld.long 0x1C0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1C4 "SW_MUX_CTL_PAD_I2C1_SDA,SW_MUX_CTL_PAD_I2C1_SDA SW MUX Control Register" bitfld.long 0x1C4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad I2C1_SDA" newline bitfld.long 0x1C4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1C8 "SW_MUX_CTL_PAD_I2C2_SCL,SW_MUX_CTL_PAD_I2C2_SCL SW MUX Control Register" bitfld.long 0x1C8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad I2C2_SCL" newline bitfld.long 0x1C8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1CC "SW_MUX_CTL_PAD_I2C2_SDA,SW_MUX_CTL_PAD_I2C2_SDA SW MUX Control Register" bitfld.long 0x1CC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad I2C2_SDA" newline bitfld.long 0x1CC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,?,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1D0 "SW_MUX_CTL_PAD_UART1_RXD,SW_MUX_CTL_PAD_UART1_RXD SW MUX Control Register" bitfld.long 0x1D0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad UART1_RXD" newline bitfld.long 0x1D0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port: S400_UART_RX of..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,?,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1D4 "SW_MUX_CTL_PAD_UART1_TXD,SW_MUX_CTL_PAD_UART1_TXD SW MUX Control Register" bitfld.long 0x1D4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad UART1_TXD" newline bitfld.long 0x1D4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port: S400_UART_TX of..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,?,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1D8 "SW_MUX_CTL_PAD_UART2_RXD,SW_MUX_CTL_PAD_UART2_RXD SW MUX Control Register" bitfld.long 0x1D8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad UART2_RXD" newline bitfld.long 0x1D8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1DC "SW_MUX_CTL_PAD_UART2_TXD,SW_MUX_CTL_PAD_UART2_TXD SW MUX Control Register" bitfld.long 0x1DC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad UART2_TXD" newline bitfld.long 0x1DC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,?,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1E0 "SW_MUX_CTL_PAD_PDM_CLK,SW_MUX_CTL_PAD_PDM_CLK SW MUX Control Register" bitfld.long 0x1E0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad PDM_CLK" newline bitfld.long 0x1E0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,?,?,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1E4 "SW_MUX_CTL_PAD_PDM_BIT_STREAM0,SW_MUX_CTL_PAD_PDM_BIT_STREAM0 SW MUX Control Register" bitfld.long 0x1E4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad PDM_BIT_STREAM0" newline bitfld.long 0x1E4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1E8 "SW_MUX_CTL_PAD_PDM_BIT_STREAM1,SW_MUX_CTL_PAD_PDM_BIT_STREAM1 SW MUX Control Register" bitfld.long 0x1E8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad PDM_BIT_STREAM1" newline bitfld.long 0x1E8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port: NMI_GLUE_NMI of..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,6: Select mux mode: ALT6 mux port:..,?" line.long 0x1EC "SW_MUX_CTL_PAD_SAI1_TXFS,SW_MUX_CTL_PAD_SAI1_TXFS SW MUX Control Register" bitfld.long 0x1EC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SAI1_TXFS" newline bitfld.long 0x1EC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1F0 "SW_MUX_CTL_PAD_SAI1_TXC,SW_MUX_CTL_PAD_SAI1_TXC SW MUX Control Register" bitfld.long 0x1F0 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SAI1_TXC" newline bitfld.long 0x1F0 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1F4 "SW_MUX_CTL_PAD_SAI1_TXD0,SW_MUX_CTL_PAD_SAI1_TXD0 SW MUX Control Register" bitfld.long 0x1F4 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SAI1_TXD0" newline bitfld.long 0x1F4 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1F8 "SW_MUX_CTL_PAD_SAI1_RXD0,SW_MUX_CTL_PAD_SAI1_RXD0 SW MUX Control Register" bitfld.long 0x1F8 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad SAI1_RXD0" newline bitfld.long 0x1F8 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port:..,1: Select mux mode: ALT1 mux port:..,2: Select mux mode: ALT2 mux port:..,3: Select mux mode: ALT3 mux port:..,4: Select mux mode: ALT4 mux port:..,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x1FC "SW_MUX_CTL_PAD_WDOG_ANY,SW_MUX_CTL_PAD_WDOG_ANY SW MUX Control Register" bitfld.long 0x1FC 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad WDOG_ANY" newline bitfld.long 0x1FC 0.--2. "MUX_MODE,MUX Mode Select Field." "0: Select mux mode: ALT0 mux port: WDOG1_WDOG_ANY..,1: Select mux mode: ALT1 mux port:..,?,?,?,5: Select mux mode: ALT5 mux port:..,?,?" line.long 0x200 "SW_MUX_CTL_PAD_FCCU_ERR0,SW_MUX_CTL_PAD_FCCU_ERR0 SW MUX Control Register" bitfld.long 0x200 4. "SION,Software Input On Field." "0: Input Path is determined by functionality,1: Force input path of pad FCCU_ERR0" line.long 0x204 "SW_PAD_CTL_PAD_DAP_TDI,SW_PAD_CTL_PAD_DAP_TDI SW PAD Control Register" hexmask.long.byte 0x204 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x204 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x204 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x204 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x204 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x204 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x204 1.--6. 1. "DSE,Drive Strength Field" line.long 0x208 "SW_PAD_CTL_PAD_DAP_TMS_SWDIO,SW_PAD_CTL_PAD_DAP_TMS_SWDIO SW PAD Control Register" hexmask.long.byte 0x208 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x208 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x208 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x208 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x208 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x208 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x208 1.--6. 1. "DSE,Drive Strength Field" line.long 0x20C "SW_PAD_CTL_PAD_DAP_TCLK_SWCLK,SW_PAD_CTL_PAD_DAP_TCLK_SWCLK SW PAD Control Register" hexmask.long.byte 0x20C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x20C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x20C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x20C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x20C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x20C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x20C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x210 "SW_PAD_CTL_PAD_DAP_TDO_TRACESWO,SW_PAD_CTL_PAD_DAP_TDO_TRACESWO SW PAD Control Register" hexmask.long.byte 0x210 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x210 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x210 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x210 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x210 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x210 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x210 1.--6. 1. "DSE,Drive Strength Field" line.long 0x214 "SW_PAD_CTL_PAD_GPIO_IO00,SW_PAD_CTL_PAD_GPIO_IO00 SW PAD Control Register" hexmask.long.byte 0x214 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x214 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x214 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x214 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x214 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x214 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x214 1.--6. 1. "DSE,Drive Strength Field" line.long 0x218 "SW_PAD_CTL_PAD_GPIO_IO01,SW_PAD_CTL_PAD_GPIO_IO01 SW PAD Control Register" hexmask.long.byte 0x218 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x218 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x218 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x218 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x218 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x218 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x218 1.--6. 1. "DSE,Drive Strength Field" line.long 0x21C "SW_PAD_CTL_PAD_GPIO_IO02,SW_PAD_CTL_PAD_GPIO_IO02 SW PAD Control Register" hexmask.long.byte 0x21C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x21C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x21C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x21C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x21C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x21C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x21C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x220 "SW_PAD_CTL_PAD_GPIO_IO03,SW_PAD_CTL_PAD_GPIO_IO03 SW PAD Control Register" hexmask.long.byte 0x220 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x220 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x220 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x220 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x220 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x220 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x220 1.--6. 1. "DSE,Drive Strength Field" line.long 0x224 "SW_PAD_CTL_PAD_GPIO_IO04,SW_PAD_CTL_PAD_GPIO_IO04 SW PAD Control Register" hexmask.long.byte 0x224 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x224 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x224 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x224 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x224 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x224 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x224 1.--6. 1. "DSE,Drive Strength Field" line.long 0x228 "SW_PAD_CTL_PAD_GPIO_IO05,SW_PAD_CTL_PAD_GPIO_IO05 SW PAD Control Register" hexmask.long.byte 0x228 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x228 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x228 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x228 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x228 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x228 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x228 1.--6. 1. "DSE,Drive Strength Field" line.long 0x22C "SW_PAD_CTL_PAD_GPIO_IO06,SW_PAD_CTL_PAD_GPIO_IO06 SW PAD Control Register" hexmask.long.byte 0x22C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x22C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x22C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x22C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x22C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x22C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x22C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x230 "SW_PAD_CTL_PAD_GPIO_IO07,SW_PAD_CTL_PAD_GPIO_IO07 SW PAD Control Register" hexmask.long.byte 0x230 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x230 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x230 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x230 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x230 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x230 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x230 1.--6. 1. "DSE,Drive Strength Field" line.long 0x234 "SW_PAD_CTL_PAD_GPIO_IO08,SW_PAD_CTL_PAD_GPIO_IO08 SW PAD Control Register" hexmask.long.byte 0x234 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x234 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x234 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x234 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x234 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x234 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x234 1.--6. 1. "DSE,Drive Strength Field" line.long 0x238 "SW_PAD_CTL_PAD_GPIO_IO09,SW_PAD_CTL_PAD_GPIO_IO09 SW PAD Control Register" hexmask.long.byte 0x238 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x238 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x238 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x238 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x238 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x238 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x238 1.--6. 1. "DSE,Drive Strength Field" line.long 0x23C "SW_PAD_CTL_PAD_GPIO_IO10,SW_PAD_CTL_PAD_GPIO_IO10 SW PAD Control Register" hexmask.long.byte 0x23C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x23C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x23C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x23C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x23C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x23C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x23C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x240 "SW_PAD_CTL_PAD_GPIO_IO11,SW_PAD_CTL_PAD_GPIO_IO11 SW PAD Control Register" hexmask.long.byte 0x240 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x240 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x240 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x240 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x240 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x240 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x240 1.--6. 1. "DSE,Drive Strength Field" line.long 0x244 "SW_PAD_CTL_PAD_GPIO_IO12,SW_PAD_CTL_PAD_GPIO_IO12 SW PAD Control Register" hexmask.long.byte 0x244 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x244 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x244 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x244 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x244 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x244 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x244 1.--6. 1. "DSE,Drive Strength Field" line.long 0x248 "SW_PAD_CTL_PAD_GPIO_IO13,SW_PAD_CTL_PAD_GPIO_IO13 SW PAD Control Register" hexmask.long.byte 0x248 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x248 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x248 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x248 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x248 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x248 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x248 1.--6. 1. "DSE,Drive Strength Field" line.long 0x24C "SW_PAD_CTL_PAD_GPIO_IO14,SW_PAD_CTL_PAD_GPIO_IO14 SW PAD Control Register" hexmask.long.byte 0x24C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x24C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x24C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x24C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x24C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x24C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x24C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x250 "SW_PAD_CTL_PAD_GPIO_IO15,SW_PAD_CTL_PAD_GPIO_IO15 SW PAD Control Register" hexmask.long.byte 0x250 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x250 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x250 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x250 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x250 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x250 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x250 1.--6. 1. "DSE,Drive Strength Field" line.long 0x254 "SW_PAD_CTL_PAD_GPIO_IO16,SW_PAD_CTL_PAD_GPIO_IO16 SW PAD Control Register" hexmask.long.byte 0x254 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x254 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x254 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x254 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x254 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x254 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x254 1.--6. 1. "DSE,Drive Strength Field" line.long 0x258 "SW_PAD_CTL_PAD_GPIO_IO17,SW_PAD_CTL_PAD_GPIO_IO17 SW PAD Control Register" hexmask.long.byte 0x258 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x258 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x258 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x258 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x258 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x258 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x258 1.--6. 1. "DSE,Drive Strength Field" line.long 0x25C "SW_PAD_CTL_PAD_GPIO_IO18,SW_PAD_CTL_PAD_GPIO_IO18 SW PAD Control Register" hexmask.long.byte 0x25C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x25C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x25C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x25C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x25C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x25C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x25C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x260 "SW_PAD_CTL_PAD_GPIO_IO19,SW_PAD_CTL_PAD_GPIO_IO19 SW PAD Control Register" hexmask.long.byte 0x260 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x260 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x260 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x260 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x260 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x260 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x260 1.--6. 1. "DSE,Drive Strength Field" line.long 0x264 "SW_PAD_CTL_PAD_GPIO_IO20,SW_PAD_CTL_PAD_GPIO_IO20 SW PAD Control Register" hexmask.long.byte 0x264 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x264 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x264 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x264 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x264 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x264 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x264 1.--6. 1. "DSE,Drive Strength Field" line.long 0x268 "SW_PAD_CTL_PAD_GPIO_IO21,SW_PAD_CTL_PAD_GPIO_IO21 SW PAD Control Register" hexmask.long.byte 0x268 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x268 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x268 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x268 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x268 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x268 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x268 1.--6. 1. "DSE,Drive Strength Field" line.long 0x26C "SW_PAD_CTL_PAD_GPIO_IO22,SW_PAD_CTL_PAD_GPIO_IO22 SW PAD Control Register" hexmask.long.byte 0x26C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x26C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x26C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x26C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x26C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x26C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x26C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x270 "SW_PAD_CTL_PAD_GPIO_IO23,SW_PAD_CTL_PAD_GPIO_IO23 SW PAD Control Register" hexmask.long.byte 0x270 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x270 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x270 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x270 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x270 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x270 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x270 1.--6. 1. "DSE,Drive Strength Field" line.long 0x274 "SW_PAD_CTL_PAD_GPIO_IO24,SW_PAD_CTL_PAD_GPIO_IO24 SW PAD Control Register" hexmask.long.byte 0x274 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x274 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x274 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x274 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x274 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x274 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x274 1.--6. 1. "DSE,Drive Strength Field" line.long 0x278 "SW_PAD_CTL_PAD_GPIO_IO25,SW_PAD_CTL_PAD_GPIO_IO25 SW PAD Control Register" hexmask.long.byte 0x278 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x278 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x278 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x278 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x278 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x278 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x278 1.--6. 1. "DSE,Drive Strength Field" line.long 0x27C "SW_PAD_CTL_PAD_GPIO_IO26,SW_PAD_CTL_PAD_GPIO_IO26 SW PAD Control Register" hexmask.long.byte 0x27C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x27C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x27C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x27C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x27C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x27C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x27C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x280 "SW_PAD_CTL_PAD_GPIO_IO27,SW_PAD_CTL_PAD_GPIO_IO27 SW PAD Control Register" hexmask.long.byte 0x280 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x280 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x280 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x280 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x280 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x280 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x280 1.--6. 1. "DSE,Drive Strength Field" line.long 0x284 "SW_PAD_CTL_PAD_GPIO_IO28,SW_PAD_CTL_PAD_GPIO_IO28 SW PAD Control Register" hexmask.long.byte 0x284 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x284 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x284 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x284 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x284 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x284 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x284 1.--6. 1. "DSE,Drive Strength Field" line.long 0x288 "SW_PAD_CTL_PAD_GPIO_IO29,SW_PAD_CTL_PAD_GPIO_IO29 SW PAD Control Register" hexmask.long.byte 0x288 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x288 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x288 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x288 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x288 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x288 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x288 1.--6. 1. "DSE,Drive Strength Field" line.long 0x28C "SW_PAD_CTL_PAD_GPIO_IO30,SW_PAD_CTL_PAD_GPIO_IO30 SW PAD Control Register" hexmask.long.byte 0x28C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x28C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x28C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x28C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x28C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x28C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x28C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x290 "SW_PAD_CTL_PAD_GPIO_IO31,SW_PAD_CTL_PAD_GPIO_IO31 SW PAD Control Register" hexmask.long.byte 0x290 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x290 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x290 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x290 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x290 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x290 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x290 1.--6. 1. "DSE,Drive Strength Field" line.long 0x294 "SW_PAD_CTL_PAD_GPIO_IO32,SW_PAD_CTL_PAD_GPIO_IO32 SW PAD Control Register" hexmask.long.byte 0x294 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x294 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x294 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x294 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x294 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x294 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x294 1.--6. 1. "DSE,Drive Strength Field" line.long 0x298 "SW_PAD_CTL_PAD_GPIO_IO33,SW_PAD_CTL_PAD_GPIO_IO33 SW PAD Control Register" hexmask.long.byte 0x298 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x298 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x298 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x298 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x298 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x298 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x298 1.--6. 1. "DSE,Drive Strength Field" line.long 0x29C "SW_PAD_CTL_PAD_GPIO_IO34,SW_PAD_CTL_PAD_GPIO_IO34 SW PAD Control Register" hexmask.long.byte 0x29C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x29C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x29C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x29C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x29C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x29C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x29C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2A0 "SW_PAD_CTL_PAD_GPIO_IO35,SW_PAD_CTL_PAD_GPIO_IO35 SW PAD Control Register" hexmask.long.byte 0x2A0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2A0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2A0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2A0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2A0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2A0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2A0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2A4 "SW_PAD_CTL_PAD_GPIO_IO36,SW_PAD_CTL_PAD_GPIO_IO36 SW PAD Control Register" hexmask.long.byte 0x2A4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2A4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2A4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2A4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2A4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2A4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2A4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2A8 "SW_PAD_CTL_PAD_GPIO_IO37,SW_PAD_CTL_PAD_GPIO_IO37 SW PAD Control Register" hexmask.long.byte 0x2A8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2A8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2A8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2A8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2A8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2A8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2A8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2AC "SW_PAD_CTL_PAD_CCM_CLKO1,SW_PAD_CTL_PAD_CCM_CLKO1 SW PAD Control Register" hexmask.long.byte 0x2AC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2AC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2AC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2AC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2AC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2AC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2AC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2B0 "SW_PAD_CTL_PAD_CCM_CLKO2,SW_PAD_CTL_PAD_CCM_CLKO2 SW PAD Control Register" hexmask.long.byte 0x2B0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2B0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2B0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2B0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2B0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2B0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2B0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2B4 "SW_PAD_CTL_PAD_CCM_CLKO3,SW_PAD_CTL_PAD_CCM_CLKO3 SW PAD Control Register" hexmask.long.byte 0x2B4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2B4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2B4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2B4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2B4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2B4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2B4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2B8 "SW_PAD_CTL_PAD_CCM_CLKO4,SW_PAD_CTL_PAD_CCM_CLKO4 SW PAD Control Register" hexmask.long.byte 0x2B8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2B8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2B8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2B8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2B8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2B8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2B8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2BC "SW_PAD_CTL_PAD_ENET1_MDC,SW_PAD_CTL_PAD_ENET1_MDC SW PAD Control Register" hexmask.long.byte 0x2BC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2BC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2BC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2BC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2BC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2BC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2BC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2C0 "SW_PAD_CTL_PAD_ENET1_MDIO,SW_PAD_CTL_PAD_ENET1_MDIO SW PAD Control Register" hexmask.long.byte 0x2C0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2C0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2C0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2C0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2C0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2C0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2C0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2C4 "SW_PAD_CTL_PAD_ENET1_TD3,SW_PAD_CTL_PAD_ENET1_TD3 SW PAD Control Register" hexmask.long.byte 0x2C4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2C4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2C4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2C4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2C4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2C4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2C4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2C8 "SW_PAD_CTL_PAD_ENET1_TD2,SW_PAD_CTL_PAD_ENET1_TD2 SW PAD Control Register" hexmask.long.byte 0x2C8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2C8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2C8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2C8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2C8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2C8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2C8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2CC "SW_PAD_CTL_PAD_ENET1_TD1,SW_PAD_CTL_PAD_ENET1_TD1 SW PAD Control Register" hexmask.long.byte 0x2CC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2CC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2CC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2CC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2CC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2CC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2CC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2D0 "SW_PAD_CTL_PAD_ENET1_TD0,SW_PAD_CTL_PAD_ENET1_TD0 SW PAD Control Register" hexmask.long.byte 0x2D0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2D0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2D0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2D0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2D0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2D0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2D0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2D4 "SW_PAD_CTL_PAD_ENET1_TX_CTL,SW_PAD_CTL_PAD_ENET1_TX_CTL SW PAD Control Register" hexmask.long.byte 0x2D4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2D4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2D4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2D4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2D4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2D4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2D4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2D8 "SW_PAD_CTL_PAD_ENET1_TXC,SW_PAD_CTL_PAD_ENET1_TXC SW PAD Control Register" hexmask.long.byte 0x2D8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2D8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2D8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2D8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2D8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2D8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2D8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2DC "SW_PAD_CTL_PAD_ENET1_RX_CTL,SW_PAD_CTL_PAD_ENET1_RX_CTL SW PAD Control Register" hexmask.long.byte 0x2DC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2DC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2DC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2DC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2DC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2DC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2DC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2E0 "SW_PAD_CTL_PAD_ENET1_RXC,SW_PAD_CTL_PAD_ENET1_RXC SW PAD Control Register" hexmask.long.byte 0x2E0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2E0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2E0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2E0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2E0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2E0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2E0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2E4 "SW_PAD_CTL_PAD_ENET1_RD0,SW_PAD_CTL_PAD_ENET1_RD0 SW PAD Control Register" hexmask.long.byte 0x2E4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2E4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2E4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2E4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2E4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2E4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2E4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2E8 "SW_PAD_CTL_PAD_ENET1_RD1,SW_PAD_CTL_PAD_ENET1_RD1 SW PAD Control Register" hexmask.long.byte 0x2E8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2E8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2E8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2E8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2E8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2E8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2E8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2EC "SW_PAD_CTL_PAD_ENET1_RD2,SW_PAD_CTL_PAD_ENET1_RD2 SW PAD Control Register" hexmask.long.byte 0x2EC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2EC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2EC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2EC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2EC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2EC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2EC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2F0 "SW_PAD_CTL_PAD_ENET1_RD3,SW_PAD_CTL_PAD_ENET1_RD3 SW PAD Control Register" hexmask.long.byte 0x2F0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2F0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2F0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2F0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2F0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2F0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2F0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2F4 "SW_PAD_CTL_PAD_ENET2_MDC,SW_PAD_CTL_PAD_ENET2_MDC SW PAD Control Register" hexmask.long.byte 0x2F4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2F4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2F4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2F4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2F4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2F4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2F4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2F8 "SW_PAD_CTL_PAD_ENET2_MDIO,SW_PAD_CTL_PAD_ENET2_MDIO SW PAD Control Register" hexmask.long.byte 0x2F8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2F8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2F8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2F8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2F8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2F8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2F8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x2FC "SW_PAD_CTL_PAD_ENET2_TD3,SW_PAD_CTL_PAD_ENET2_TD3 SW PAD Control Register" hexmask.long.byte 0x2FC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x2FC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x2FC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x2FC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x2FC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x2FC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x2FC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x300 "SW_PAD_CTL_PAD_ENET2_TD2,SW_PAD_CTL_PAD_ENET2_TD2 SW PAD Control Register" hexmask.long.byte 0x300 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x300 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x300 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x300 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x300 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x300 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x300 1.--6. 1. "DSE,Drive Strength Field" line.long 0x304 "SW_PAD_CTL_PAD_ENET2_TD1,SW_PAD_CTL_PAD_ENET2_TD1 SW PAD Control Register" hexmask.long.byte 0x304 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x304 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x304 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x304 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x304 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x304 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x304 1.--6. 1. "DSE,Drive Strength Field" line.long 0x308 "SW_PAD_CTL_PAD_ENET2_TD0,SW_PAD_CTL_PAD_ENET2_TD0 SW PAD Control Register" hexmask.long.byte 0x308 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x308 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x308 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x308 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x308 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x308 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x308 1.--6. 1. "DSE,Drive Strength Field" line.long 0x30C "SW_PAD_CTL_PAD_ENET2_TX_CTL,SW_PAD_CTL_PAD_ENET2_TX_CTL SW PAD Control Register" hexmask.long.byte 0x30C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x30C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x30C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x30C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x30C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x30C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x30C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x310 "SW_PAD_CTL_PAD_ENET2_TXC,SW_PAD_CTL_PAD_ENET2_TXC SW PAD Control Register" hexmask.long.byte 0x310 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x310 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x310 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x310 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x310 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x310 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x310 1.--6. 1. "DSE,Drive Strength Field" line.long 0x314 "SW_PAD_CTL_PAD_ENET2_RX_CTL,SW_PAD_CTL_PAD_ENET2_RX_CTL SW PAD Control Register" hexmask.long.byte 0x314 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x314 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x314 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x314 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x314 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x314 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x314 1.--6. 1. "DSE,Drive Strength Field" line.long 0x318 "SW_PAD_CTL_PAD_ENET2_RXC,SW_PAD_CTL_PAD_ENET2_RXC SW PAD Control Register" hexmask.long.byte 0x318 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x318 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x318 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x318 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x318 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x318 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x318 1.--6. 1. "DSE,Drive Strength Field" line.long 0x31C "SW_PAD_CTL_PAD_ENET2_RD0,SW_PAD_CTL_PAD_ENET2_RD0 SW PAD Control Register" hexmask.long.byte 0x31C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x31C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x31C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x31C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x31C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x31C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x31C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x320 "SW_PAD_CTL_PAD_ENET2_RD1,SW_PAD_CTL_PAD_ENET2_RD1 SW PAD Control Register" hexmask.long.byte 0x320 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x320 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x320 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x320 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x320 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x320 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x320 1.--6. 1. "DSE,Drive Strength Field" line.long 0x324 "SW_PAD_CTL_PAD_ENET2_RD2,SW_PAD_CTL_PAD_ENET2_RD2 SW PAD Control Register" hexmask.long.byte 0x324 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x324 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x324 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x324 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x324 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x324 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x324 1.--6. 1. "DSE,Drive Strength Field" line.long 0x328 "SW_PAD_CTL_PAD_ENET2_RD3,SW_PAD_CTL_PAD_ENET2_RD3 SW PAD Control Register" hexmask.long.byte 0x328 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x328 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x328 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x328 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x328 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x328 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x328 1.--6. 1. "DSE,Drive Strength Field" line.long 0x32C "SW_PAD_CTL_PAD_SD1_CLK,SW_PAD_CTL_PAD_SD1_CLK SW PAD Control Register" hexmask.long.byte 0x32C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x32C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x32C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x32C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x32C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x32C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x32C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x330 "SW_PAD_CTL_PAD_SD1_CMD,SW_PAD_CTL_PAD_SD1_CMD SW PAD Control Register" hexmask.long.byte 0x330 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x330 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x330 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x330 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x330 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x330 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x330 1.--6. 1. "DSE,Drive Strength Field" line.long 0x334 "SW_PAD_CTL_PAD_SD1_DATA0,SW_PAD_CTL_PAD_SD1_DATA0 SW PAD Control Register" hexmask.long.byte 0x334 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x334 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x334 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x334 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x334 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x334 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x334 1.--6. 1. "DSE,Drive Strength Field" line.long 0x338 "SW_PAD_CTL_PAD_SD1_DATA1,SW_PAD_CTL_PAD_SD1_DATA1 SW PAD Control Register" hexmask.long.byte 0x338 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x338 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x338 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x338 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x338 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x338 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x338 1.--6. 1. "DSE,Drive Strength Field" line.long 0x33C "SW_PAD_CTL_PAD_SD1_DATA2,SW_PAD_CTL_PAD_SD1_DATA2 SW PAD Control Register" hexmask.long.byte 0x33C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x33C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x33C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x33C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x33C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x33C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x33C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x340 "SW_PAD_CTL_PAD_SD1_DATA3,SW_PAD_CTL_PAD_SD1_DATA3 SW PAD Control Register" hexmask.long.byte 0x340 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x340 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x340 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x340 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x340 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x340 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x340 1.--6. 1. "DSE,Drive Strength Field" line.long 0x344 "SW_PAD_CTL_PAD_SD1_DATA4,SW_PAD_CTL_PAD_SD1_DATA4 SW PAD Control Register" hexmask.long.byte 0x344 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x344 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x344 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x344 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x344 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x344 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x344 1.--6. 1. "DSE,Drive Strength Field" line.long 0x348 "SW_PAD_CTL_PAD_SD1_DATA5,SW_PAD_CTL_PAD_SD1_DATA5 SW PAD Control Register" hexmask.long.byte 0x348 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x348 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x348 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x348 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x348 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x348 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x348 1.--6. 1. "DSE,Drive Strength Field" line.long 0x34C "SW_PAD_CTL_PAD_SD1_DATA6,SW_PAD_CTL_PAD_SD1_DATA6 SW PAD Control Register" hexmask.long.byte 0x34C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x34C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x34C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x34C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x34C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x34C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x34C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x350 "SW_PAD_CTL_PAD_SD1_DATA7,SW_PAD_CTL_PAD_SD1_DATA7 SW PAD Control Register" hexmask.long.byte 0x350 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x350 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x350 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x350 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x350 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x350 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x350 1.--6. 1. "DSE,Drive Strength Field" line.long 0x354 "SW_PAD_CTL_PAD_SD1_STROBE,SW_PAD_CTL_PAD_SD1_STROBE SW PAD Control Register" hexmask.long.byte 0x354 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x354 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x354 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x354 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x354 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x354 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x354 1.--6. 1. "DSE,Drive Strength Field" line.long 0x358 "SW_PAD_CTL_PAD_SD2_VSELECT,SW_PAD_CTL_PAD_SD2_VSELECT SW PAD Control Register" hexmask.long.byte 0x358 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x358 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x358 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x358 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x358 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x358 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x358 1.--6. 1. "DSE,Drive Strength Field" line.long 0x35C "SW_PAD_CTL_PAD_SD3_CLK,SW_PAD_CTL_PAD_SD3_CLK SW PAD Control Register" hexmask.long.byte 0x35C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x35C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x35C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x35C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x35C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x35C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x35C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x360 "SW_PAD_CTL_PAD_SD3_CMD,SW_PAD_CTL_PAD_SD3_CMD SW PAD Control Register" hexmask.long.byte 0x360 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x360 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x360 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x360 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x360 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x360 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x360 1.--6. 1. "DSE,Drive Strength Field" line.long 0x364 "SW_PAD_CTL_PAD_SD3_DATA0,SW_PAD_CTL_PAD_SD3_DATA0 SW PAD Control Register" hexmask.long.byte 0x364 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x364 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x364 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x364 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x364 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x364 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x364 1.--6. 1. "DSE,Drive Strength Field" line.long 0x368 "SW_PAD_CTL_PAD_SD3_DATA1,SW_PAD_CTL_PAD_SD3_DATA1 SW PAD Control Register" hexmask.long.byte 0x368 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x368 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x368 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x368 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x368 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x368 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x368 1.--6. 1. "DSE,Drive Strength Field" line.long 0x36C "SW_PAD_CTL_PAD_SD3_DATA2,SW_PAD_CTL_PAD_SD3_DATA2 SW PAD Control Register" hexmask.long.byte 0x36C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x36C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x36C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x36C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x36C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x36C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x36C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x370 "SW_PAD_CTL_PAD_SD3_DATA3,SW_PAD_CTL_PAD_SD3_DATA3 SW PAD Control Register" hexmask.long.byte 0x370 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x370 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x370 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x370 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x370 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x370 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x370 1.--6. 1. "DSE,Drive Strength Field" line.long 0x374 "SW_PAD_CTL_PAD_XSPI1_DATA0,SW_PAD_CTL_PAD_XSPI1_DATA0 SW PAD Control Register" hexmask.long.byte 0x374 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x374 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x374 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x374 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x374 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x374 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x374 1.--6. 1. "DSE,Drive Strength Field" line.long 0x378 "SW_PAD_CTL_PAD_XSPI1_DATA1,SW_PAD_CTL_PAD_XSPI1_DATA1 SW PAD Control Register" hexmask.long.byte 0x378 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x378 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x378 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x378 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x378 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x378 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x378 1.--6. 1. "DSE,Drive Strength Field" line.long 0x37C "SW_PAD_CTL_PAD_XSPI1_DATA2,SW_PAD_CTL_PAD_XSPI1_DATA2 SW PAD Control Register" hexmask.long.byte 0x37C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x37C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x37C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x37C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x37C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x37C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x37C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x380 "SW_PAD_CTL_PAD_XSPI1_DATA3,SW_PAD_CTL_PAD_XSPI1_DATA3 SW PAD Control Register" hexmask.long.byte 0x380 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x380 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x380 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x380 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x380 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x380 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x380 1.--6. 1. "DSE,Drive Strength Field" line.long 0x384 "SW_PAD_CTL_PAD_XSPI1_DATA4,SW_PAD_CTL_PAD_XSPI1_DATA4 SW PAD Control Register" hexmask.long.byte 0x384 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x384 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x384 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x384 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x384 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x384 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x384 1.--6. 1. "DSE,Drive Strength Field" line.long 0x388 "SW_PAD_CTL_PAD_XSPI1_DATA5,SW_PAD_CTL_PAD_XSPI1_DATA5 SW PAD Control Register" hexmask.long.byte 0x388 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x388 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x388 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x388 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x388 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x388 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x388 1.--6. 1. "DSE,Drive Strength Field" line.long 0x38C "SW_PAD_CTL_PAD_XSPI1_DATA6,SW_PAD_CTL_PAD_XSPI1_DATA6 SW PAD Control Register" hexmask.long.byte 0x38C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x38C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x38C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x38C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x38C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x38C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x38C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x390 "SW_PAD_CTL_PAD_XSPI1_DATA7,SW_PAD_CTL_PAD_XSPI1_DATA7 SW PAD Control Register" hexmask.long.byte 0x390 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x390 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x390 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x390 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x390 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x390 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x390 1.--6. 1. "DSE,Drive Strength Field" line.long 0x394 "SW_PAD_CTL_PAD_XSPI1_DQS,SW_PAD_CTL_PAD_XSPI1_DQS SW PAD Control Register" hexmask.long.byte 0x394 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x394 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x394 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x394 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x394 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x394 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x394 1.--6. 1. "DSE,Drive Strength Field" line.long 0x398 "SW_PAD_CTL_PAD_XSPI1_SCLK,SW_PAD_CTL_PAD_XSPI1_SCLK SW PAD Control Register" hexmask.long.byte 0x398 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x398 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x398 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x398 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x398 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x398 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x398 1.--6. 1. "DSE,Drive Strength Field" line.long 0x39C "SW_PAD_CTL_PAD_XSPI1_SS0_B,SW_PAD_CTL_PAD_XSPI1_SS0_B SW PAD Control Register" hexmask.long.byte 0x39C 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x39C 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x39C 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x39C 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x39C 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x39C 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x39C 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3A0 "SW_PAD_CTL_PAD_XSPI1_SS1_B,SW_PAD_CTL_PAD_XSPI1_SS1_B SW PAD Control Register" hexmask.long.byte 0x3A0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3A0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3A0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3A0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3A0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3A0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3A0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3A4 "SW_PAD_CTL_PAD_SD2_CD_B,SW_PAD_CTL_PAD_SD2_CD_B SW PAD Control Register" hexmask.long.byte 0x3A4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3A4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3A4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3A4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3A4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3A4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3A4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3A8 "SW_PAD_CTL_PAD_SD2_CLK,SW_PAD_CTL_PAD_SD2_CLK SW PAD Control Register" hexmask.long.byte 0x3A8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3A8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3A8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3A8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3A8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3A8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3A8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3AC "SW_PAD_CTL_PAD_SD2_CMD,SW_PAD_CTL_PAD_SD2_CMD SW PAD Control Register" hexmask.long.byte 0x3AC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3AC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3AC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3AC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3AC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3AC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3AC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3B0 "SW_PAD_CTL_PAD_SD2_DATA0,SW_PAD_CTL_PAD_SD2_DATA0 SW PAD Control Register" hexmask.long.byte 0x3B0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3B0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3B0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3B0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3B0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3B0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3B0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3B4 "SW_PAD_CTL_PAD_SD2_DATA1,SW_PAD_CTL_PAD_SD2_DATA1 SW PAD Control Register" hexmask.long.byte 0x3B4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3B4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3B4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3B4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3B4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3B4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3B4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3B8 "SW_PAD_CTL_PAD_SD2_DATA2,SW_PAD_CTL_PAD_SD2_DATA2 SW PAD Control Register" hexmask.long.byte 0x3B8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3B8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3B8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3B8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3B8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3B8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3B8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3BC "SW_PAD_CTL_PAD_SD2_DATA3,SW_PAD_CTL_PAD_SD2_DATA3 SW PAD Control Register" hexmask.long.byte 0x3BC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3BC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3BC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3BC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3BC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3BC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3BC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3C0 "SW_PAD_CTL_PAD_SD2_RESET_B,SW_PAD_CTL_PAD_SD2_RESET_B SW PAD Control Register" hexmask.long.byte 0x3C0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3C0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3C0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3C0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3C0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3C0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3C0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3C4 "SW_PAD_CTL_PAD_I2C1_SCL,SW_PAD_CTL_PAD_I2C1_SCL SW PAD Control Register" hexmask.long.byte 0x3C4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3C4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3C4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3C4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3C4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3C4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3C4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3C8 "SW_PAD_CTL_PAD_I2C1_SDA,SW_PAD_CTL_PAD_I2C1_SDA SW PAD Control Register" hexmask.long.byte 0x3C8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3C8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3C8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3C8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3C8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3C8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3C8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3CC "SW_PAD_CTL_PAD_I2C2_SCL,SW_PAD_CTL_PAD_I2C2_SCL SW PAD Control Register" hexmask.long.byte 0x3CC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3CC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3CC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3CC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3CC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3CC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3CC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3D0 "SW_PAD_CTL_PAD_I2C2_SDA,SW_PAD_CTL_PAD_I2C2_SDA SW PAD Control Register" hexmask.long.byte 0x3D0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3D0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3D0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3D0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3D0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3D0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3D0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3D4 "SW_PAD_CTL_PAD_UART1_RXD,SW_PAD_CTL_PAD_UART1_RXD SW PAD Control Register" hexmask.long.byte 0x3D4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3D4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3D4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3D4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3D4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3D4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3D4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3D8 "SW_PAD_CTL_PAD_UART1_TXD,SW_PAD_CTL_PAD_UART1_TXD SW PAD Control Register" hexmask.long.byte 0x3D8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3D8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3D8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3D8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3D8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3D8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3D8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3DC "SW_PAD_CTL_PAD_UART2_RXD,SW_PAD_CTL_PAD_UART2_RXD SW PAD Control Register" hexmask.long.byte 0x3DC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3DC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3DC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3DC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3DC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3DC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3DC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3E0 "SW_PAD_CTL_PAD_UART2_TXD,SW_PAD_CTL_PAD_UART2_TXD SW PAD Control Register" hexmask.long.byte 0x3E0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3E0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3E0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3E0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3E0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3E0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3E0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3E4 "SW_PAD_CTL_PAD_PDM_CLK,SW_PAD_CTL_PAD_PDM_CLK SW PAD Control Register" hexmask.long.byte 0x3E4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3E4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3E4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3E4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3E4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3E4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3E4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3E8 "SW_PAD_CTL_PAD_PDM_BIT_STREAM0,SW_PAD_CTL_PAD_PDM_BIT_STREAM0 SW PAD Control Register" hexmask.long.byte 0x3E8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3E8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3E8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3E8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3E8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3E8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3E8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3EC "SW_PAD_CTL_PAD_PDM_BIT_STREAM1,SW_PAD_CTL_PAD_PDM_BIT_STREAM1 SW PAD Control Register" hexmask.long.byte 0x3EC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3EC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3EC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3EC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3EC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3EC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3EC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3F0 "SW_PAD_CTL_PAD_SAI1_TXFS,SW_PAD_CTL_PAD_SAI1_TXFS SW PAD Control Register" hexmask.long.byte 0x3F0 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3F0 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3F0 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3F0 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3F0 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3F0 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3F0 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3F4 "SW_PAD_CTL_PAD_SAI1_TXC,SW_PAD_CTL_PAD_SAI1_TXC SW PAD Control Register" hexmask.long.byte 0x3F4 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3F4 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3F4 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3F4 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3F4 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3F4 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3F4 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3F8 "SW_PAD_CTL_PAD_SAI1_TXD0,SW_PAD_CTL_PAD_SAI1_TXD0 SW PAD Control Register" hexmask.long.byte 0x3F8 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3F8 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3F8 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3F8 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3F8 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3F8 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3F8 1.--6. 1. "DSE,Drive Strength Field" line.long 0x3FC "SW_PAD_CTL_PAD_SAI1_RXD0,SW_PAD_CTL_PAD_SAI1_RXD0 SW PAD Control Register" hexmask.long.byte 0x3FC 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x3FC 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x3FC 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x3FC 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x3FC 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x3FC 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x3FC 1.--6. 1. "DSE,Drive Strength Field" line.long 0x400 "SW_PAD_CTL_PAD_WDOG_ANY,SW_PAD_CTL_PAD_WDOG_ANY SW PAD Control Register" hexmask.long.byte 0x400 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x400 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x400 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x400 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x400 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x400 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x400 1.--6. 1. "DSE,Drive Strength Field" line.long 0x404 "SW_PAD_CTL_PAD_FCCU_ERR0,SW_PAD_CTL_PAD_FCCU_ERR0 SW PAD Control Register" hexmask.long.byte 0x404 24.--31. 1. "APC,Domain Access Field" newline bitfld.long 0x404 12. "HYS,Schmitt trigger Field" "0: No Schmitt input,1: Schmitt input" newline bitfld.long 0x404 11. "OD,Open Drain Field" "0: Open Drain Disable,1: Open Drain Enable" newline bitfld.long 0x404 10. "PD,Pull Down Field" "0: Not pull down,1: Pull down" newline bitfld.long 0x404 9. "PU,Pull Up Field" "0: No pull up,1: Pull up" newline bitfld.long 0x404 7.--8. "FSEL1,Slew Rate Field" "0: no description available,1: no description available,2: Slight Fast Slew Rate,3: Fast Slew Rate" newline hexmask.long.byte 0x404 1.--6. 1. "DSE,Drive Strength Field" line.long 0x408 "CAN1_IPP_IND_CANRX_SELECT_INPUT,CAN1_IPP_IND_CANRX_SELECT_INPUT DAISY Register" bitfld.long 0x408 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: PDM_BIT_STREAM0 for Mode: ALT6,1: Selecting Pad: SAI1_TXC for Mode: ALT4" line.long 0x40C "PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_0,PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_0 DAISY Register" bitfld.long 0x40C 0.--1. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: PDM_BIT_STREAM0 for Mode: ALT0,1: Selecting Pad: GPIO_IO05 for Mode: ALT2,2: Selecting Pad: GPIO_IO20 for Mode: ALT2,?" line.long 0x410 "PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_1,PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_1 DAISY Register" bitfld.long 0x410 0.--1. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: PDM_BIT_STREAM1 for Mode: ALT0,1: Selecting Pad: GPIO_IO06 for Mode: ALT2,2: Selecting Pad: GPIO_IO26 for Mode: ALT2,?" line.long 0x414 "PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_2,PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_2 DAISY Register" bitfld.long 0x414 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO12 for Mode: ALT2,1: Selecting Pad: GPIO_IO16 for Mode: ALT2" line.long 0x418 "PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_3,PDM_IPP_IND_MIC_PDM_BITSTREAM_SELECT_INPUT_3 DAISY Register" bitfld.long 0x418 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO13 for Mode: ALT2,1: Selecting Pad: GPIO_IO19 for Mode: ALT2" line.long 0x41C "SAI1_IPP_IND_SAI_MCLK_SELECT_INPUT,SAI1_IPP_IND_SAI_MCLK_SELECT_INPUT DAISY Register" bitfld.long 0x41C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: UART2_RXD for Mode: ALT4,1: Selecting Pad: SAI1_RXD0 for Mode: ALT1" line.long 0x420 "EXT1_CLK_SELECT_INPUT,EXT1_CLK_SELECT_INPUT DAISY Register" bitfld.long 0x420 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: PDM_BIT_STREAM1 for Mode: ALT6,1: Selecting Pad: SD2_VSELECT for Mode: ALT6" line.long 0x424 "NETC_CMPLX_EMDC_IN_SELECT_INPUT,NETC_CMPLX_EMDC_IN_SELECT_INPUT DAISY Register" bitfld.long 0x424 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_MDC for Mode: ALT0,1: Selecting Pad: ENET2_MDC for Mode: ALT0" line.long 0x428 "NETC_CMPLX_EMDIO_IN_SELECT_INPUT,NETC_CMPLX_EMDIO_IN_SELECT_INPUT DAISY Register" bitfld.long 0x428 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_MDIO for Mode: ALT0,1: Selecting Pad: ENET2_MDIO for Mode: ALT0" line.long 0x42C "NETC_CMPLX_ETH0_RMII_RX_ER_SELECT_INPUT,NETC_CMPLX_ETH0_RMII_RX_ER_SELECT_INPUT DAISY Register" bitfld.long 0x42C 0.--1. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_RXC for Mode: ALT1,1: Selecting Pad: ENET1_RD2 for Mode: ALT2,2: Selecting Pad: ENET2_RXC for Mode: ALT1,3: Selecting Pad: ENET2_RD2 for Mode: ALT6" line.long 0x430 "NETC_CMPLX_TMR_1588_TRIG1_SELECT_INPUT,NETC_CMPLX_TMR_1588_TRIG1_SELECT_INPUT DAISY Register" bitfld.long 0x430 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: CCM_CLKO1 for Mode: ALT1,1: Selecting Pad: SD2_CD_B for Mode: ALT1" line.long 0x434 "NETC_CMPLX_TMR_1588_TRIG2_SELECT_INPUT,NETC_CMPLX_TMR_1588_TRIG2_SELECT_INPUT DAISY Register" bitfld.long 0x434 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: CCM_CLKO3 for Mode: ALT1,1: Selecting Pad: SD2_CMD for Mode: ALT1" line.long 0x438 "SAI2_IPP_IND_SAI_RXDATA_SELECT_INPUT_6,SAI2_IPP_IND_SAI_RXDATA_SELECT_INPUT_6 DAISY Register" bitfld.long 0x438 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: XSPI1_DATA5 for Mode: ALT3,1: Selecting Pad: XSPI1_DQS for Mode: ALT3" line.long 0x43C "SAI2_IPP_IND_SAI_RXDATA_SELECT_INPUT_7,SAI2_IPP_IND_SAI_RXDATA_SELECT_INPUT_7 DAISY Register" bitfld.long 0x43C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: XSPI1_DATA6 for Mode: ALT3,1: Selecting Pad: XSPI1_SS1_B for Mode: ALT3" line.long 0x440 "CAN2_IPP_IND_CANRX_SELECT_INPUT,CAN2_IPP_IND_CANRX_SELECT_INPUT DAISY Register" bitfld.long 0x440 0.--1. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TDO_TRACESWO for Mode: ALT3,1: Selecting Pad: ENET1_TD2 for Mode: ALT2,2: Selecting Pad: GPIO_IO27 for Mode: ALT2,3: Selecting Pad: SD2_DATA1 for Mode: ALT2" line.long 0x444 "CAN3_IPP_IND_CANRX_SELECT_INPUT,CAN3_IPP_IND_CANRX_SELECT_INPUT DAISY Register" bitfld.long 0x444 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: CCM_CLKO4 for Mode: ALT2,1: Selecting Pad: GPIO_IO29 for Mode: ALT2" line.long 0x448 "CAN4_IPP_IND_CANRX_SELECT_INPUT,CAN4_IPP_IND_CANRX_SELECT_INPUT DAISY Register" bitfld.long 0x448 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TCLK_SWCLK for Mode: ALT2,1: Selecting Pad: GPIO_IO05 for Mode: ALT3" line.long 0x44C "CAN5_IPP_IND_CANRX_SELECT_INPUT,CAN5_IPP_IND_CANRX_SELECT_INPUT DAISY Register" bitfld.long 0x44C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO23 for Mode: ALT3,1: Selecting Pad: GPIO_IO31 for Mode: ALT2" line.long 0x450 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_26,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_26 DAISY Register" bitfld.long 0x450 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: CCM_CLKO1 for Mode: ALT4,1: Selecting Pad: GPIO_IO26 for Mode: ALT3" line.long 0x454 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_27,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_27 DAISY Register" bitfld.long 0x454 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: CCM_CLKO2 for Mode: ALT4,1: Selecting Pad: GPIO_IO27 for Mode: ALT7" line.long 0x458 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_30,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_30 DAISY Register" bitfld.long 0x458 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TCLK_SWCLK for Mode: ALT4,1: Selecting Pad: GPIO_IO30 for Mode: ALT7" line.long 0x45C "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_31,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_31 DAISY Register" bitfld.long 0x45C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TDO_TRACESWO for Mode: ALT4,1: Selecting Pad: GPIO_IO31 for Mode: ALT7" line.long 0x460 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_0,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_0 DAISY Register" bitfld.long 0x460 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO00 for Mode: ALT7,1: Selecting Pad: SD2_CD_B for Mode: ALT4" line.long 0x464 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_1,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_1 DAISY Register" bitfld.long 0x464 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO01 for Mode: ALT7,1: Selecting Pad: SD2_CLK for Mode: ALT4" line.long 0x468 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_2,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_2 DAISY Register" bitfld.long 0x468 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO02 for Mode: ALT7,1: Selecting Pad: SD2_CMD for Mode: ALT4" line.long 0x46C "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_3,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_3 DAISY Register" bitfld.long 0x46C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO03 for Mode: ALT7,1: Selecting Pad: SD2_DATA0 for Mode: ALT4" line.long 0x470 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_4,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_4 DAISY Register" bitfld.long 0x470 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO04 for Mode: ALT7,1: Selecting Pad: SD2_DATA1 for Mode: ALT4" line.long 0x474 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_5,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_5 DAISY Register" bitfld.long 0x474 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO05 for Mode: ALT7,1: Selecting Pad: SD2_DATA2 for Mode: ALT4" line.long 0x478 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_6,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_6 DAISY Register" bitfld.long 0x478 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO06 for Mode: ALT7,1: Selecting Pad: SD2_DATA3 for Mode: ALT4" line.long 0x47C "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_7,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_7 DAISY Register" bitfld.long 0x47C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO07 for Mode: ALT7,1: Selecting Pad: SD2_RESET_B for Mode: ALT4" line.long 0x480 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_8,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_8 DAISY Register" bitfld.long 0x480 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO08 for Mode: ALT7,1: Selecting Pad: SD1_CLK for Mode: ALT4" line.long 0x484 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_9,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_9 DAISY Register" bitfld.long 0x484 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO09 for Mode: ALT7,1: Selecting Pad: SD1_CMD for Mode: ALT4" line.long 0x488 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_10,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_10 DAISY Register" bitfld.long 0x488 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO10 for Mode: ALT7,1: Selecting Pad: SD1_DATA0 for Mode: ALT4" line.long 0x48C "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_11,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_11 DAISY Register" bitfld.long 0x48C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO11 for Mode: ALT7,1: Selecting Pad: SD1_DATA1 for Mode: ALT4" line.long 0x490 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_12,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_12 DAISY Register" bitfld.long 0x490 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO12 for Mode: ALT3,1: Selecting Pad: SD1_DATA2 for Mode: ALT4" line.long 0x494 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_13,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_13 DAISY Register" bitfld.long 0x494 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO13 for Mode: ALT7,1: Selecting Pad: SD1_DATA3 for Mode: ALT4" line.long 0x498 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_14,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_14 DAISY Register" bitfld.long 0x498 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO14 for Mode: ALT7,1: Selecting Pad: SD1_DATA4 for Mode: ALT4" line.long 0x49C "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_15,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_15 DAISY Register" bitfld.long 0x49C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO15 for Mode: ALT7,1: Selecting Pad: SD1_DATA5 for Mode: ALT4" line.long 0x4A0 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_16,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_16 DAISY Register" bitfld.long 0x4A0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO16 for Mode: ALT7,1: Selecting Pad: SD1_DATA6 for Mode: ALT4" line.long 0x4A4 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_17,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_17 DAISY Register" bitfld.long 0x4A4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO17 for Mode: ALT7,1: Selecting Pad: SD1_DATA7 for Mode: ALT4" line.long 0x4A8 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_18,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_18 DAISY Register" bitfld.long 0x4A8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO18 for Mode: ALT7,1: Selecting Pad: SD1_STROBE for Mode: ALT4" line.long 0x4AC "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_19,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_19 DAISY Register" bitfld.long 0x4AC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO19 for Mode: ALT3,1: Selecting Pad: SD2_VSELECT for Mode: ALT4" line.long 0x4B0 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_20,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_20 DAISY Register" bitfld.long 0x4B0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO20 for Mode: ALT7,1: Selecting Pad: SD3_CLK for Mode: ALT4" line.long 0x4B4 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_21,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_21 DAISY Register" bitfld.long 0x4B4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO21 for Mode: ALT3,1: Selecting Pad: SD3_CMD for Mode: ALT4" line.long 0x4B8 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_22,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_22 DAISY Register" bitfld.long 0x4B8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO22 for Mode: ALT7,1: Selecting Pad: SD3_DATA0 for Mode: ALT4" line.long 0x4BC "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_23,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_23 DAISY Register" bitfld.long 0x4BC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO23 for Mode: ALT7,1: Selecting Pad: SD3_DATA1 for Mode: ALT4" line.long 0x4C0 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_24,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_24 DAISY Register" bitfld.long 0x4C0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO24 for Mode: ALT7,1: Selecting Pad: SD3_DATA2 for Mode: ALT4" line.long 0x4C4 "FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_25,FLEXIO1_IPP_IND_FLEXIO_SELECT_INPUT_25 DAISY Register" bitfld.long 0x4C4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO25 for Mode: ALT7,1: Selecting Pad: SD3_DATA3 for Mode: ALT4" line.long 0x4C8 "FLEXSPI1_I_IPP_IND_DQS_FA_SELECT_INPUT,FLEXSPI1_I_IPP_IND_DQS_FA_SELECT_INPUT DAISY Register" bitfld.long 0x4C8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD1_STROBE for Mode: ALT1,1: Selecting Pad: XSPI1_DQS for Mode: ALT0" line.long 0x4CC "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_0,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_0 DAISY Register" bitfld.long 0x4CC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA0 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA0 for Mode: ALT0" line.long 0x4D0 "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_1,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_1 DAISY Register" bitfld.long 0x4D0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA1 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA1 for Mode: ALT0" line.long 0x4D4 "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_2,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_2 DAISY Register" bitfld.long 0x4D4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA2 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA2 for Mode: ALT0" line.long 0x4D8 "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_3,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_3 DAISY Register" bitfld.long 0x4D8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA3 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA3 for Mode: ALT0" line.long 0x4DC "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_4,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_4 DAISY Register" bitfld.long 0x4DC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD1_DATA4 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA4 for Mode: ALT0" line.long 0x4E0 "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_5,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_5 DAISY Register" bitfld.long 0x4E0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD1_DATA5 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA5 for Mode: ALT0" line.long 0x4E4 "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_6,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_6 DAISY Register" bitfld.long 0x4E4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD1_DATA6 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA6 for Mode: ALT0" line.long 0x4E8 "FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_7,FLEXSPI1_I_IPP_IND_IO_FA_SELECT_INPUT_7 DAISY Register" bitfld.long 0x4E8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD1_DATA7 for Mode: ALT1,1: Selecting Pad: XSPI1_DATA7 for Mode: ALT0" line.long 0x4EC "FLEXSPI1_I_IPP_IND_SCK_FA_SELECT_INPUT,FLEXSPI1_I_IPP_IND_SCK_FA_SELECT_INPUT DAISY Register" bitfld.long 0x4EC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_CLK for Mode: ALT1,1: Selecting Pad: XSPI1_SCLK for Mode: ALT0" line.long 0x4F0 "I3C2_PIN_SCL_IN_SELECT_INPUT,I3C2_PIN_SCL_IN_SELECT_INPUT DAISY Register" bitfld.long 0x4F0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_MDC for Mode: ALT2,1: Selecting Pad: SD2_CD_B for Mode: ALT2" line.long 0x4F4 "I3C2_PIN_SDA_IN_SELECT_INPUT,I3C2_PIN_SDA_IN_SELECT_INPUT DAISY Register" bitfld.long 0x4F4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_MDIO for Mode: ALT2,1: Selecting Pad: SD2_CLK for Mode: ALT2" line.long 0x4F8 "I_IPP_IND_IO_FA_SELECT_INPUT_0,I_IPP_IND_IO_FA_SELECT_INPUT_0 DAISY Register" bitfld.long 0x4F8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA0 for Mode: ALT6,1: Selecting Pad: XSPI1_DATA0 for Mode: ALT4" line.long 0x4FC "I_IPP_IND_IO_FA_SELECT_INPUT_1,I_IPP_IND_IO_FA_SELECT_INPUT_1 DAISY Register" bitfld.long 0x4FC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA1 for Mode: ALT6,1: Selecting Pad: XSPI1_DATA1 for Mode: ALT4" line.long 0x500 "I_IPP_IND_IO_FA_SELECT_INPUT_2,I_IPP_IND_IO_FA_SELECT_INPUT_2 DAISY Register" bitfld.long 0x500 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA2 for Mode: ALT6,1: Selecting Pad: XSPI1_DATA2 for Mode: ALT4" line.long 0x504 "I_IPP_IND_IO_FA_SELECT_INPUT_3,I_IPP_IND_IO_FA_SELECT_INPUT_3 DAISY Register" bitfld.long 0x504 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA3 for Mode: ALT6,1: Selecting Pad: XSPI1_DATA3 for Mode: ALT4" line.long 0x508 "I_IPP_IND_SCK_FA_SELECT_INPUT,I_IPP_IND_SCK_FA_SELECT_INPUT DAISY Register" bitfld.long 0x508 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_CLK for Mode: ALT6,1: Selecting Pad: XSPI1_SCLK for Mode: ALT4" line.long 0x50C "LPI2C3_IPP_IND_LPI2C_SCL_SELECT_INPUT,LPI2C3_IPP_IND_LPI2C_SCL_SELECT_INPUT DAISY Register" bitfld.long 0x50C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO01 for Mode: ALT1,1: Selecting Pad: GPIO_IO29 for Mode: ALT1" line.long 0x510 "LPI2C3_IPP_IND_LPI2C_SDA_SELECT_INPUT,LPI2C3_IPP_IND_LPI2C_SDA_SELECT_INPUT DAISY Register" bitfld.long 0x510 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO00 for Mode: ALT1,1: Selecting Pad: GPIO_IO28 for Mode: ALT1" line.long 0x514 "LPI2C4_IPP_IND_LPI2C_SCL_SELECT_INPUT,LPI2C4_IPP_IND_LPI2C_SCL_SELECT_INPUT DAISY Register" bitfld.long 0x514 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO03 for Mode: ALT1,1: Selecting Pad: GPIO_IO31 for Mode: ALT1" line.long 0x518 "LPI2C4_IPP_IND_LPI2C_SDA_SELECT_INPUT,LPI2C4_IPP_IND_LPI2C_SDA_SELECT_INPUT DAISY Register" bitfld.long 0x518 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO02 for Mode: ALT1,1: Selecting Pad: GPIO_IO30 for Mode: ALT1" line.long 0x51C "LPI2C5_IPP_IND_LPI2C_SCL_SELECT_INPUT,LPI2C5_IPP_IND_LPI2C_SCL_SELECT_INPUT DAISY Register" bitfld.long 0x51C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO01 for Mode: ALT6,1: Selecting Pad: GPIO_IO23 for Mode: ALT6" line.long 0x520 "LPI2C5_IPP_IND_LPI2C_SDA_SELECT_INPUT,LPI2C5_IPP_IND_LPI2C_SDA_SELECT_INPUT DAISY Register" bitfld.long 0x520 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO00 for Mode: ALT6,1: Selecting Pad: GPIO_IO22 for Mode: ALT6" line.long 0x524 "LPI2C6_IPP_IND_LPI2C_SCL_SELECT_INPUT,LPI2C6_IPP_IND_LPI2C_SCL_SELECT_INPUT DAISY Register" bitfld.long 0x524 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO03 for Mode: ALT6,1: Selecting Pad: GPIO_IO05 for Mode: ALT6" line.long 0x528 "LPI2C6_IPP_IND_LPI2C_SDA_SELECT_INPUT,LPI2C6_IPP_IND_LPI2C_SDA_SELECT_INPUT DAISY Register" bitfld.long 0x528 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO02 for Mode: ALT6,1: Selecting Pad: GPIO_IO04 for Mode: ALT6" line.long 0x52C "LPI2C7_IPP_IND_LPI2C_SCL_SELECT_INPUT,LPI2C7_IPP_IND_LPI2C_SCL_SELECT_INPUT DAISY Register" bitfld.long 0x52C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO07 for Mode: ALT6,1: Selecting Pad: GPIO_IO09 for Mode: ALT6" line.long 0x530 "LPI2C7_IPP_IND_LPI2C_SDA_SELECT_INPUT,LPI2C7_IPP_IND_LPI2C_SDA_SELECT_INPUT DAISY Register" bitfld.long 0x530 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO06 for Mode: ALT6,1: Selecting Pad: GPIO_IO08 for Mode: ALT6" line.long 0x534 "LPI2C8_IPP_IND_LPI2C_SCL_SELECT_INPUT,LPI2C8_IPP_IND_LPI2C_SCL_SELECT_INPUT DAISY Register" bitfld.long 0x534 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO11 for Mode: ALT6,1: Selecting Pad: GPIO_IO13 for Mode: ALT6" line.long 0x538 "LPI2C8_IPP_IND_LPI2C_SDA_SELECT_INPUT,LPI2C8_IPP_IND_LPI2C_SDA_SELECT_INPUT DAISY Register" bitfld.long 0x538 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO10 for Mode: ALT6,1: Selecting Pad: GPIO_IO12 for Mode: ALT6" line.long 0x53C "LPSPI4_IPP_IND_LPSPI_PCS_SELECT_INPUT_0,LPSPI4_IPP_IND_LPSPI_PCS_SELECT_INPUT_0 DAISY Register" bitfld.long 0x53C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO34 for Mode: ALT4,1: Selecting Pad: GPIO_IO18 for Mode: ALT5" line.long 0x540 "LPSPI4_IPP_IND_LPSPI_PCS_SELECT_INPUT_1,LPSPI4_IPP_IND_LPSPI_PCS_SELECT_INPUT_1 DAISY Register" bitfld.long 0x540 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO33 for Mode: ALT4,1: Selecting Pad: GPIO_IO17 for Mode: ALT5" line.long 0x544 "LPSPI4_IPP_IND_LPSPI_PCS_SELECT_INPUT_2,LPSPI4_IPP_IND_LPSPI_PCS_SELECT_INPUT_2 DAISY Register" bitfld.long 0x544 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO32 for Mode: ALT4,1: Selecting Pad: GPIO_IO16 for Mode: ALT5" line.long 0x548 "LPSPI4_IPP_IND_LPSPI_SCK_SELECT_INPUT,LPSPI4_IPP_IND_LPSPI_SCK_SELECT_INPUT DAISY Register" bitfld.long 0x548 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO37 for Mode: ALT4,1: Selecting Pad: GPIO_IO21 for Mode: ALT5" line.long 0x54C "LPSPI4_IPP_IND_LPSPI_SDI_SELECT_INPUT,LPSPI4_IPP_IND_LPSPI_SDI_SELECT_INPUT DAISY Register" bitfld.long 0x54C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO35 for Mode: ALT4,1: Selecting Pad: GPIO_IO19 for Mode: ALT5" line.long 0x550 "LPSPI4_IPP_IND_LPSPI_SDO_SELECT_INPUT,LPSPI4_IPP_IND_LPSPI_SDO_SELECT_INPUT DAISY Register" bitfld.long 0x550 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO36 for Mode: ALT4,1: Selecting Pad: GPIO_IO20 for Mode: ALT5" line.long 0x554 "LPTMR2_IPP_IND_LPTIMER_SELECT_INPUT_0,LPTMR2_IPP_IND_LPTIMER_SELECT_INPUT_0 DAISY Register" bitfld.long 0x554 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_RD1 for Mode: ALT3,1: Selecting Pad: SD2_DATA3 for Mode: ALT1" line.long 0x558 "LPTMR2_IPP_IND_LPTIMER_SELECT_INPUT_1,LPTMR2_IPP_IND_LPTIMER_SELECT_INPUT_1 DAISY Register" bitfld.long 0x558 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_RD2 for Mode: ALT3,1: Selecting Pad: SD2_RESET_B for Mode: ALT1" line.long 0x55C "LPTMR2_IPP_IND_LPTIMER_SELECT_INPUT_2,LPTMR2_IPP_IND_LPTIMER_SELECT_INPUT_2 DAISY Register" bitfld.long 0x55C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_RD3 for Mode: ALT3,1: Selecting Pad: SD2_VSELECT for Mode: ALT2" line.long 0x560 "LPUART3_IPP_IND_LPUART_CTS_N_SELECT_INPUT,LPUART3_IPP_IND_LPUART_CTS_N_SELECT_INPUT DAISY Register" bitfld.long 0x560 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_RD1 for Mode: ALT1,1: Selecting Pad: GPIO_IO16 for Mode: ALT4" line.long 0x564 "LPUART3_IPP_IND_LPUART_RXD_SELECT_INPUT,LPUART3_IPP_IND_LPUART_RXD_SELECT_INPUT DAISY Register" bitfld.long 0x564 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_RD0 for Mode: ALT1,1: Selecting Pad: GPIO_IO15 for Mode: ALT1" line.long 0x568 "LPUART3_IPP_IND_LPUART_TXD_SELECT_INPUT,LPUART3_IPP_IND_LPUART_TXD_SELECT_INPUT DAISY Register" bitfld.long 0x568 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET1_TD0 for Mode: ALT1,1: Selecting Pad: GPIO_IO14 for Mode: ALT1" line.long 0x56C "LPUART4_IPP_IND_LPUART_CTS_N_SELECT_INPUT,LPUART4_IPP_IND_LPUART_CTS_N_SELECT_INPUT DAISY Register" bitfld.long 0x56C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_RD2 for Mode: ALT1,1: Selecting Pad: GPIO_IO16 for Mode: ALT6" line.long 0x570 "LPUART4_IPP_IND_LPUART_RXD_SELECT_INPUT,LPUART4_IPP_IND_LPUART_RXD_SELECT_INPUT DAISY Register" bitfld.long 0x570 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_RD0 for Mode: ALT1,1: Selecting Pad: GPIO_IO15 for Mode: ALT6" line.long 0x574 "LPUART4_IPP_IND_LPUART_TXD_SELECT_INPUT,LPUART4_IPP_IND_LPUART_TXD_SELECT_INPUT DAISY Register" bitfld.long 0x574 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_TD0 for Mode: ALT1,1: Selecting Pad: GPIO_IO14 for Mode: ALT6" line.long 0x578 "LPUART5_IPP_IND_LPUART_CTS_N_SELECT_INPUT,LPUART5_IPP_IND_LPUART_CTS_N_SELECT_INPUT DAISY Register" bitfld.long 0x578 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TCLK_SWCLK for Mode: ALT6,1: Selecting Pad: GPIO_IO02 for Mode: ALT5" line.long 0x57C "LPUART5_IPP_IND_LPUART_RXD_SELECT_INPUT,LPUART5_IPP_IND_LPUART_RXD_SELECT_INPUT DAISY Register" bitfld.long 0x57C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TDI for Mode: ALT6,1: Selecting Pad: GPIO_IO01 for Mode: ALT5" line.long 0x580 "LPUART5_IPP_IND_LPUART_TXD_SELECT_INPUT,LPUART5_IPP_IND_LPUART_TXD_SELECT_INPUT DAISY Register" bitfld.long 0x580 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TDO_TRACESWO for Mode: ALT6,1: Selecting Pad: GPIO_IO00 for Mode: ALT5" line.long 0x584 "LPUART6_IPP_IND_LPUART_CTS_N_SELECT_INPUT,LPUART6_IPP_IND_LPUART_CTS_N_SELECT_INPUT DAISY Register" bitfld.long 0x584 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO34 for Mode: ALT2,1: Selecting Pad: GPIO_IO06 for Mode: ALT5" line.long 0x588 "LPUART6_IPP_IND_LPUART_RXD_SELECT_INPUT,LPUART6_IPP_IND_LPUART_RXD_SELECT_INPUT DAISY Register" bitfld.long 0x588 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO33 for Mode: ALT2,1: Selecting Pad: GPIO_IO05 for Mode: ALT5" line.long 0x58C "LPUART6_IPP_IND_LPUART_TXD_SELECT_INPUT,LPUART6_IPP_IND_LPUART_TXD_SELECT_INPUT DAISY Register" bitfld.long 0x58C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO32 for Mode: ALT2,1: Selecting Pad: GPIO_IO04 for Mode: ALT5" line.long 0x590 "LPUART7_IPP_IND_LPUART_RXD_SELECT_INPUT,LPUART7_IPP_IND_LPUART_RXD_SELECT_INPUT DAISY Register" bitfld.long 0x590 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO37 for Mode: ALT2,1: Selecting Pad: GPIO_IO09 for Mode: ALT5" line.long 0x594 "LPUART7_IPP_IND_LPUART_TXD_SELECT_INPUT,LPUART7_IPP_IND_LPUART_TXD_SELECT_INPUT DAISY Register" bitfld.long 0x594 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO36 for Mode: ALT2,1: Selecting Pad: GPIO_IO08 for Mode: ALT5" line.long 0x598 "SAI3_IPP_IND_SAI_RXBCLK_SELECT_INPUT,SAI3_IPP_IND_SAI_RXBCLK_SELECT_INPUT DAISY Register" bitfld.long 0x598 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO18 for Mode: ALT1,1: Selecting Pad: GPIO_IO21 for Mode: ALT7" line.long 0x59C "SAI3_IPP_IND_SAI_RXSYNC_SELECT_INPUT,SAI3_IPP_IND_SAI_RXSYNC_SELECT_INPUT DAISY Register" bitfld.long 0x59C 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO12 for Mode: ALT7,1: Selecting Pad: GPIO_IO19 for Mode: ALT1" line.long 0x5A0 "SAI4_IPP_IND_SAI_RXBCLK_SELECT_INPUT,SAI4_IPP_IND_SAI_RXBCLK_SELECT_INPUT DAISY Register" bitfld.long 0x5A0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_RD0 for Mode: ALT3,1: Selecting Pad: XSPI1_SS0_B for Mode: ALT2" line.long 0x5A4 "SAI4_IPP_IND_SAI_RXDATA_SELECT_INPUT_0,SAI4_IPP_IND_SAI_RXDATA_SELECT_INPUT_0 DAISY Register" bitfld.long 0x5A4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_RD1 for Mode: ALT3,1: Selecting Pad: XSPI1_DATA3 for Mode: ALT2" line.long 0x5A8 "SAI4_IPP_IND_SAI_RXSYNC_SELECT_INPUT,SAI4_IPP_IND_SAI_RXSYNC_SELECT_INPUT DAISY Register" bitfld.long 0x5A8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_RXC for Mode: ALT3,1: Selecting Pad: XSPI1_SCLK for Mode: ALT2" line.long 0x5AC "SAI4_IPP_IND_SAI_TXBCLK_SELECT_INPUT,SAI4_IPP_IND_SAI_TXBCLK_SELECT_INPUT DAISY Register" bitfld.long 0x5AC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_TD1 for Mode: ALT3,1: Selecting Pad: XSPI1_DATA0 for Mode: ALT2" line.long 0x5B0 "SAI4_IPP_IND_SAI_TXSYNC_SELECT_INPUT,SAI4_IPP_IND_SAI_TXSYNC_SELECT_INPUT DAISY Register" bitfld.long 0x5B0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_TD2 for Mode: ALT3,1: Selecting Pad: XSPI1_DATA1 for Mode: ALT2" line.long 0x5B4 "SAI5_IPP_IND_SAI_RXBCLK_SELECT_INPUT,SAI5_IPP_IND_SAI_RXBCLK_SELECT_INPUT DAISY Register" bitfld.long 0x5B4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA0 for Mode: ALT3,1: Selecting Pad: XSPI1_SS1_B for Mode: ALT1" line.long 0x5B8 "SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_0,SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_0 DAISY Register" bitfld.long 0x5B8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_CLK for Mode: ALT3,1: Selecting Pad: XSPI1_DATA7 for Mode: ALT1" line.long 0x5BC "SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_1,SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_1 DAISY Register" bitfld.long 0x5BC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA1 for Mode: ALT2,1: Selecting Pad: XSPI1_DATA4 for Mode: ALT2" line.long 0x5C0 "SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_2,SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_2 DAISY Register" bitfld.long 0x5C0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA2 for Mode: ALT2,1: Selecting Pad: XSPI1_DATA5 for Mode: ALT2" line.long 0x5C4 "SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_3,SAI5_IPP_IND_SAI_RXDATA_SELECT_INPUT_3 DAISY Register" bitfld.long 0x5C4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA3 for Mode: ALT2,1: Selecting Pad: XSPI1_DATA6 for Mode: ALT2" line.long 0x5C8 "SAI5_IPP_IND_SAI_RXSYNC_SELECT_INPUT,SAI5_IPP_IND_SAI_RXSYNC_SELECT_INPUT DAISY Register" bitfld.long 0x5C8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_CMD for Mode: ALT3,1: Selecting Pad: XSPI1_DQS for Mode: ALT1" line.long 0x5CC "SAI5_IPP_IND_SAI_TXBCLK_SELECT_INPUT,SAI5_IPP_IND_SAI_TXBCLK_SELECT_INPUT DAISY Register" bitfld.long 0x5CC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA3 for Mode: ALT3,1: Selecting Pad: XSPI1_DATA6 for Mode: ALT1" line.long 0x5D0 "SAI5_IPP_IND_SAI_TXSYNC_SELECT_INPUT,SAI5_IPP_IND_SAI_TXSYNC_SELECT_INPUT DAISY Register" bitfld.long 0x5D0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: SD3_DATA2 for Mode: ALT3,1: Selecting Pad: XSPI1_DATA5 for Mode: ALT1" line.long 0x5D4 "SPDIF_I_SELECT_INPUT,SPDIF_I_SELECT_INPUT DAISY Register" bitfld.long 0x5D4 0.--1. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: ENET2_RD1 for Mode: ALT1,1: Selecting Pad: ENET2_RD3 for Mode: ALT2,2: Selecting Pad: GPIO_IO22 for Mode: ALT2,?" line.long 0x5D8 "USDHC3_IPP_CARD_CLK_IN_SELECT_INPUT,USDHC3_IPP_CARD_CLK_IN_SELECT_INPUT DAISY Register" bitfld.long 0x5D8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO22 for Mode: ALT1,1: Selecting Pad: SD3_CLK for Mode: ALT0" line.long 0x5DC "USDHC3_IPP_CMD_IN_SELECT_INPUT,USDHC3_IPP_CMD_IN_SELECT_INPUT DAISY Register" bitfld.long 0x5DC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO23 for Mode: ALT1,1: Selecting Pad: SD3_CMD for Mode: ALT0" line.long 0x5E0 "USDHC3_IPP_DAT0_IN_SELECT_INPUT,USDHC3_IPP_DAT0_IN_SELECT_INPUT DAISY Register" bitfld.long 0x5E0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO24 for Mode: ALT1,1: Selecting Pad: SD3_DATA0 for Mode: ALT0" line.long 0x5E4 "USDHC3_IPP_DAT1_IN_SELECT_INPUT,USDHC3_IPP_DAT1_IN_SELECT_INPUT DAISY Register" bitfld.long 0x5E4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO25 for Mode: ALT1,1: Selecting Pad: SD3_DATA1 for Mode: ALT0" line.long 0x5E8 "USDHC3_IPP_DAT2_IN_SELECT_INPUT,USDHC3_IPP_DAT2_IN_SELECT_INPUT DAISY Register" bitfld.long 0x5E8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO26 for Mode: ALT1,1: Selecting Pad: SD3_DATA2 for Mode: ALT0" line.long 0x5EC "USDHC3_IPP_DAT3_IN_SELECT_INPUT,USDHC3_IPP_DAT3_IN_SELECT_INPUT DAISY Register" bitfld.long 0x5EC 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: GPIO_IO27 for Mode: ALT1,1: Selecting Pad: SD3_DATA3 for Mode: ALT0" line.long 0x5F0 "JTAG_MUX_TCK_SELECT_INPUT,JTAG_MUX_TCK_SELECT_INPUT DAISY Register" bitfld.long 0x5F0 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TCLK_SWCLK for Mode: ALT0,1: Selecting Pad: GPIO_IO25 for Mode: ALT5" line.long 0x5F4 "JTAG_MUX_TDI_SELECT_INPUT,JTAG_MUX_TDI_SELECT_INPUT DAISY Register" bitfld.long 0x5F4 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TDI for Mode: ALT0,1: Selecting Pad: GPIO_IO26 for Mode: ALT5" line.long 0x5F8 "JTAG_MUX_TMS_SELECT_INPUT,JTAG_MUX_TMS_SELECT_INPUT DAISY Register" bitfld.long 0x5F8 0. "DAISY,Selecting Pads Involved in Daisy Chain." "0: Selecting Pad: DAP_TMS_SWDIO for Mode: ALT0,1: Selecting Pad: GPIO_IO27 for Mode: ALT5" tree.end tree "IOMUXC_GPR" base ad:0x443D0000 group.long 0x0++0x3 line.long 0x0 "GPR0,GPR0 General Purpose Register" hexmask.long 0x0 0.--31. 1. "GPR,General purpose bits" tree.end tree "M7_CMU" base ad:0x0 tree "CMU_M0" base ad:0x4A080000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree "CMU_M1" base ad:0x4A090000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree.end tree "M7_EIM" base ad:0x4A060000 group.long 0x0++0x7 line.long 0x0 "EIMCR,Error Injection Module Configuration Register" bitfld.long 0x0 0. "GEIEN,Global Error Injection Enable" "0: Disabled,1: Enabled" line.long 0x4 "EICHEN,Error Injection Channel Enable register" bitfld.long 0x4 31. "EICH0EN,Error Injection Channel 0 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 30. "EICH1EN,Error Injection Channel 1 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 29. "EICH2EN,Error Injection Channel 2 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 28. "EICH3EN,Error Injection Channel 3 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 27. "EICH4EN,Error Injection Channel 4 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." group.long 0x100++0xB line.long 0x0 "EICHD0_WORD0,Error Injection Channel Descriptor 0. Word0" hexmask.long.word 0x0 18.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD0_WORD1,Error Injection Channel Descriptor 0. Word1" hexmask.long.word 0x4 0.--11. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD0_WORD2,Error Injection Channel Descriptor 0. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" group.long 0x140++0x13 line.long 0x0 "EICHD1_WORD0,Error Injection Channel Descriptor 1. Word0" hexmask.long.word 0x0 16.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD1_WORD1,Error Injection Channel Descriptor 1. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD1_WORD2,Error Injection Channel Descriptor 1. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" line.long 0xC "EICHD1_WORD3,Error Injection Channel Descriptor 1. Word3" hexmask.long 0xC 0.--31. 1. "B8_11DATA_MASK,Data Mask Bytes 8-11" line.long 0x10 "EICHD1_WORD4,Error Injection Channel Descriptor 1. Word4" hexmask.long 0x10 0.--31. 1. "B12_15DATA_MASK,Data Mask Bytes 12-15" group.long 0x180++0x13 line.long 0x0 "EICHD2_WORD0,Error Injection Channel Descriptor 2. Word0" hexmask.long 0x0 4.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD2_WORD1,Error Injection Channel Descriptor 2. Word1" hexmask.long.byte 0x4 0.--7. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD2_WORD2,Error Injection Channel Descriptor 2. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" line.long 0xC "EICHD2_WORD3,Error Injection Channel Descriptor 2. Word3" hexmask.long 0xC 0.--31. 1. "B8_11DATA_MASK,Data Mask Bytes 8-11" line.long 0x10 "EICHD2_WORD4,Error Injection Channel Descriptor 2. Word4" hexmask.long 0x10 0.--31. 1. "B12_15DATA_MASK,Data Mask Bytes 12-15" group.long 0x1C0++0x13 line.long 0x0 "EICHD3_WORD0,Error Injection Channel Descriptor 3. Word0" hexmask.long 0x0 4.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD3_WORD1,Error Injection Channel Descriptor 3. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD3_WORD2,Error Injection Channel Descriptor 3. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" line.long 0xC "EICHD3_WORD3,Error Injection Channel Descriptor 3. Word3" hexmask.long 0xC 0.--31. 1. "B8_11DATA_MASK,Data Mask Bytes 8-11" line.long 0x10 "EICHD3_WORD4,Error Injection Channel Descriptor 3. Word4" hexmask.long 0x10 0.--31. 1. "B12_15DATA_MASK,Data Mask Bytes 12-15" group.long 0x200++0x13 line.long 0x0 "EICHD4_WORD0,Error Injection Channel Descriptor 4. Word0" hexmask.long 0x0 4.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD4_WORD1,Error Injection Channel Descriptor 4. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD4_WORD2,Error Injection Channel Descriptor 4. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" line.long 0xC "EICHD4_WORD3,Error Injection Channel Descriptor 4. Word3" hexmask.long 0xC 0.--31. 1. "B8_11DATA_MASK,Data Mask Bytes 8-11" line.long 0x10 "EICHD4_WORD4,Error Injection Channel Descriptor 4. Word4" hexmask.long 0x10 0.--31. 1. "B12_15DATA_MASK,Data Mask Bytes 12-15" tree.end tree "M7_ERM" base ad:0x4A070000 group.long 0x0++0x3 line.long 0x0 "CR0,ERM Configuration Register 0" bitfld.long 0x0 31. "ESCIE0,ESCIE0" "0: Interrupt notification of Memory 0 single-bit..,1: Interrupt notification of Memory 0 single-bit.." bitfld.long 0x0 30. "ENCIE0,ENCIE0" "0: Interrupt notification of Memory 0..,1: Interrupt notification of Memory 0.." newline bitfld.long 0x0 27. "ESCIE1,ESCIE1" "0: Interrupt notification of Memory 1 single-bit..,1: Interrupt notification of Memory 1 single-bit.." bitfld.long 0x0 26. "ENCIE1,ENCIE1" "0: Interrupt notification of Memory 1..,1: Interrupt notification of Memory 1.." newline bitfld.long 0x0 23. "ESCIE2,ESCIE2" "0: Interrupt notification of Memory 2 single-bit..,1: Interrupt notification of Memory 2 single-bit.." bitfld.long 0x0 22. "ENCIE2,ENCIE2" "0: Interrupt notification of Memory 2..,1: Interrupt notification of Memory 2.." newline bitfld.long 0x0 19. "ESCIE3,ESCIE3" "0: Interrupt notification of Memory 3 single-bit..,1: Interrupt notification of Memory 3 single-bit.." bitfld.long 0x0 18. "ENCIE3,ENCIE3" "0: Interrupt notification of Memory 3..,1: Interrupt notification of Memory 3.." group.long 0x10++0x3 line.long 0x0 "SR0,ERM Status Register 0" eventfld.long 0x0 31. "SBC0,SBC0" "0: No single-bit correction event on Memory 0..,1: Single-bit correction event on Memory 0 detected." eventfld.long 0x0 30. "NCE0,NCE0" "0: No non-correctable error event on Memory 0..,1: Non-correctable error event on Memory 0 detected." newline eventfld.long 0x0 27. "SBC1,SBC1" "0: No single-bit correction event on Memory 1..,1: Single-bit correction event on Memory 1 detected." eventfld.long 0x0 26. "NCE1,NCE1" "0: No non-correctable error event on Memory 1..,1: Non-correctable error event on Memory 1 detected." newline eventfld.long 0x0 23. "SBC2,SBC2" "0: No single-bit correction event on Memory 2..,1: Single-bit correction event on Memory 2 detected." eventfld.long 0x0 22. "NCE2,NCE2" "0: No non-correctable error event on Memory 2..,1: Non-correctable error event on Memory 2 detected." newline eventfld.long 0x0 19. "SBC3,SBC3" "0: No single-bit correction event on Memory 3..,1: Single-bit correction event on Memory 3 detected." eventfld.long 0x0 18. "NCE3,NCE3" "0: No non-correctable error event on Memory 3..,1: Non-correctable error event on Memory 3 detected." group.long 0x108++0x3 line.long 0x0 "CORR_ERR_CNT0,ERM Memory 0 Correctable Error Count Register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Memory n Correctable Error Count" group.long 0x118++0x3 line.long 0x0 "CORR_ERR_CNT1,ERM Memory 1 Correctable Error Count Register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Memory n Correctable Error Count" group.long 0x128++0x3 line.long 0x0 "CORR_ERR_CNT2,ERM Memory 2 Correctable Error Count Register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Memory n Correctable Error Count" group.long 0x138++0x3 line.long 0x0 "CORR_ERR_CNT3,ERM Memory 3 Correctable Error Count Register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Memory n Correctable Error Count" tree.end tree "M7_LSTCU_M7MIX" base ad:0x4A050000 group.long 0x8++0x3 line.long 0x0 "ERR_STAT,Error Status" bitfld.long 0x0 17. "RFSF,Recoverable Fault Status" "0: No recoverable fault,1: Recoverable fault has occurred" bitfld.long 0x0 16. "UFSF,Unrecoverable Fault Status" "0: No unrecoverable fault,1: Unrecoverable fault has occurred" newline rbitfld.long 0x0 2. "INVP_LB,Invalid pointer LBIST" "0: Invalid scheduling of LSTCU by CSTCU occurs when..,1: Invalid scheduling of LSTCU by CSTCU for BIST.." rbitfld.long 0x0 1. "INVP_MB,Invalid Pointer MBIST" "0: No invalid pointer to BIST controller.,1: Invalid BIST pointer specified during BIST.." newline rbitfld.long 0x0 0. "INVP_FB,Invalid Pointer FBIST" "0: Invalid scheduling of LSTCU by CSTCU occurs when..,1: Invalid scheduling of LSTCU by CSTCU for BIST.." group.long 0x10++0x3 line.long 0x0 "ERR_FM,Error Fault Mapping" bitfld.long 0x0 2. "INVPFMLB,Invalid BIST Pointer Fault Mapping during LBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" bitfld.long 0x0 1. "INVPFMMB,Invalid BIST Pointer Fault Mapping during MBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" newline bitfld.long 0x0 0. "INVPFMFB,Invalid BIST Pointer Fault Mapping during functional mode BIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" rgroup.long 0x60++0x3 line.long 0x0 "MB_RSTAT0,MBIST Run Status 0" bitfld.long 0x0 0. "MBSTAT0,MBIST Run Result Status Bit 0" "0: Pass,1: Fail" group.long 0x180++0x3 line.long 0x0 "MBFM0,MBIST Fault Mapping 0" bitfld.long 0x0 0. "MBSTATFM0,MBIST_RUN_STAT0[MBSTAT0] Fault Mapping" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" group.long 0x260++0x3 line.long 0x0 "STAG,Stagger" hexmask.long.byte 0x0 8.--15. 1. "MB_DELAY,MBIST Delay" group.long 0x270++0xB line.long 0x0 "PH1_DUR,Phase 1 Duration" hexmask.long.word 0x0 0.--9. 1. "PH1DUR,Phase 1 Duration" line.long 0x4 "ISODUR,Isolation Duration" hexmask.long.word 0x4 16.--25. 1. "DIS_DUR,Disable Duration" hexmask.long.word 0x4 0.--9. 1. "EN_DUR,Enable Duration" line.long 0x8 "SRCENDUR,Synchronous Reset Clock Enable Duration" hexmask.long.word 0x8 0.--9. 1. "CLKENDUR,Synchronous Reset Clock Enable Duration (in LSTCU clock cycles)" group.long 0x300++0x3 line.long 0x0 "MBPTR0,MBIST Scheduler Pointer" bitfld.long 0x0 31. "MBEOL,MBIST End of List" "0: Not end of list,1: End of list" bitfld.long 0x0 8. "MBCSM,MBIST Concurrent or Sequential Mode" "0: Sequential mode,1: Concurrent mode" newline hexmask.long.byte 0x0 0.--7. 1. "MBPTR,MBIST Pointer" tree.end tree "M7_TCU" base ad:0x4A000000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 1. "tcu_fuse_obs,fuse observation" "0,1" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree "MAC_ADAPTER" base ad:0x4C800000 group.word 0x200++0x1 line.word 0x0 "MAC_ADAPTER_LOCK_PHY,LOCK Register for PHY" hexmask.word.byte 0x0 12.--15. 1. "WHOAMI,port ID" bitfld.word 0x0 7. "LOCK,lock bit" "0,1" hexmask.word.byte 0x0 0.--3. 1. "LOCK_OWNER,lock owner" group.word 0x204++0x1 line.word 0x0 "MAC_ADAPTER_LOCK_MPLLA,LOCK Register for PHY" hexmask.word.byte 0x0 12.--15. 1. "WHOAMI,port ID" bitfld.word 0x0 7. "LOCK,lock bit" "0,1" hexmask.word.byte 0x0 0.--3. 1. "LOCK_OWNER,lock owner" group.word 0x208++0x1 line.word 0x0 "MAC_ADAPTER_LOCK_MPLLB,LOCK Register for PHY" hexmask.word.byte 0x0 12.--15. 1. "WHOAMI,port ID" bitfld.word 0x0 7. "LOCK,lock bit" "0,1" hexmask.word.byte 0x0 0.--3. 1. "LOCK_OWNER,lock owner" group.word 0x20C++0x1 line.word 0x0 "MAC_ADAPTER_LOCK_ROM,LOCK Register for PHY" hexmask.word.byte 0x0 12.--15. 1. "WHOAMI,port ID" bitfld.word 0x0 7. "LOCK,lock bit" "0,1" hexmask.word.byte 0x0 0.--3. 1. "LOCK_OWNER,lock owner" group.word 0x210++0x1 line.word 0x0 "MAC_ADAPTER_LOCK_RAM,LOCK Register for PHY" hexmask.word.byte 0x0 12.--15. 1. "WHOAMI,port ID" bitfld.word 0x0 7. "LOCK,lock bit" "0,1" hexmask.word.byte 0x0 0.--3. 1. "LOCK_OWNER,lock owner" group.word 0x214++0x1 line.word 0x0 "MAC_ADAPTER_ERROR_EVENT,Error event register for FIFO" eventfld.word 0x0 12. "XGMII_TX_FIFO_UDF,FIFO underflow for XGMII tx path" "0,1" eventfld.word 0x0 8. "XGMII_RX_FIFO_OVF,FIFO overflow for XGMII rx path" "0,1" eventfld.word 0x0 4. "SGMII_TX_FIFO_UDF,FIFO underflow for SGMII tx path" "0,1" eventfld.word 0x0 0. "SGMII_RX_FIFO_OVF,FIFO overflow for SGMII rx path" "0,1" tree.end tree "MU (Message Unit)" base ad:0x0 tree "MU1_MUB" base ad:0x44230000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x8 4. "RSTH,Processor A Reset Hold" "0: Release from reset,1: Hold in reset" newline bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU2_MUB" base ad:0x445C0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x8 4. "RSTH,Processor A Reset Hold" "0: Release from reset,1: Hold in reset" newline bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU3_MUB" base ad:0x445E0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x8 4. "RSTH,Processor A Reset Hold" "0: Release from reset,1: Hold in reset" newline bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU4_MUB" base ad:0x44600000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x8 4. "RSTH,Processor A Reset Hold" "0: Release from reset,1: Hold in reset" newline bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU5_MUB" base ad:0x44620000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x8 4. "RSTH,Processor A Reset Hold" "0: Release from reset,1: Hold in reset" newline bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU6_MUB" base ad:0x44640000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." newline rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" newline rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." newline rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU7_MUB" base ad:0x42440000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU8_MUB" base ad:0x42740000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUB Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUB Receive Full Pending Flag" "0: Not pending. MUA is not writing to a TRn register.,1: Pending. MUA is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUB Transmit Empty Pending" "0: Not pending. MUA is reading no RRn register.,1: Pending. MUA is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUB General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUB Flags Update Pending" "0: No pending update flags (initiated by MUB),1: Pending update flags (initiated by MUB)" rbitfld.long 0x4 2. "EP,MUB Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset.,1: Processor A issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor A clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor B Hardware Reset Mask" "0: MUA_CCR0[HR] is not masked and the hardware..,1: MUA_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor A Hardware Reset" "0: De-assert hardware reset to Processor A.,1: Assert hardware reset to Processor A." bitfld.long 0x8 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 7. "PDIE,Processor A Power-down mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0xC 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 7. "PD,Processor A Power-down mode Entry Interrupt Pending" "0: Processor A did not enter Power-down mode.,1: Processor A entered Power-down mode" eventfld.long 0x10 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode.,1: Processor A entered Stop Mode" newline eventfld.long 0x10 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode.,1: Processor A entered Wait Mode" eventfld.long 0x10 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode.,1: Processor A entered Halt Mode" newline eventfld.long 0x10 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x10 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode.,1: Processor A entered Run Mode" newline eventfld.long 0x10 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUA_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 7. "PD,Processor A Power-down mode Entry" "0: Not in Power-down mode,1: In Power-down mode" bitfld.long 0x0 6. "STOP,Processor A Stop Mode Entry" "0: Not in Stop mode,1: In Stop mode" newline bitfld.long 0x0 5. "WAIT,Processor A Wait Mode Entry" "0: Not in Wait mode,1: In Wait mode" bitfld.long 0x0 4. "HALT,Processor A Halt Mode Entry" "0: Not in Halt mode,1: In Halt mode" newline bitfld.long 0x0 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" bitfld.long 0x0 2. "RUN,Processor A Run Mode Entry" "0: Not in Run Mode,1: In Run Mode." group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." bitfld.long 0x0 1. "F1,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUB to MUA Flag n" "0: Clear MUA_FSR[Fn].,1: Set MUA_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUA to MUB-Side Flag n" "0: MUA_FCR[Fn] = 0.,1: MUA_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUB General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUB General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUB General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUB Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUB Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUB Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 2. "RF2,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." newline bitfld.long 0x0 1. "RF1,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." bitfld.long 0x0 0. "RF0,MUB Receive Register n Full" "0: Not full,1: MUB_RRn register has received data from MUA TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end tree "MU_A1_MUA" base ad:0x4AC60000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A1_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A2_MUA" base ad:0x4AC70000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A2_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A3_MUA" base ad:0x4AC80000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A3_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A4_MUA" base ad:0x4AC90000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A4_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A5_MUA" base ad:0x4ACA0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A5_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A6_MUA" base ad:0x4ACB0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A6_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A7_MUA" base ad:0x4ACC0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A7_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A8_MUA" base ad:0x4ACD0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A8_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A9_MUA" base ad:0x4ACE0000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree "MU_A9_MUB" base ad:0x4AC00000 rgroup.long 0x0++0x7 line.long 0x0 "VER,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Set Number" line.long 0x4 "PAR,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x4 16.--23. 1. "GIR_NUM,General-purpose Interrupt Request Number" newline hexmask.long.byte 0x4 8.--15. 1. "RR_NUM,Receive Register Number" hexmask.long.byte 0x4 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x8++0x13 line.long 0x0 "CR,Control Register" bitfld.long 0x0 1. "MURIE,MUA Reset Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "MUR,MU Reset" "0: Idle,1: Reset" line.long 0x4 "SR,Status Register" rbitfld.long 0x4 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending.,1: Core operation mode entry event pending." rbitfld.long 0x4 6. "RFP,MUA Receive Full Pending Flag" "0: Not pending. MUB is not writing to a TRn register.,1: Pending. MUB is writing to a TRn register." newline rbitfld.long 0x4 5. "TEP,MUA Transmit Empty Pending" "0: Not pending. MUB is reading no RRn register.,1: Pending. MUB is reading an RRn register." rbitfld.long 0x4 4. "GIRP,MUA General-purpose Interrupt Pending" "0: No request sent,1: Request sent" newline rbitfld.long 0x4 3. "FUP,MUA Flags Update Pending" "0: No pending update flags (initiated by MUA),1: Pending update flags (initiated by MUA)" rbitfld.long 0x4 2. "EP,MUA Side Event Pending" "0: Not pending,1: Pending" newline eventfld.long 0x4 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset.,1: Processor B issued MU reset." rbitfld.long 0x4 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset state.,1: MUA or MUB is in reset state." line.long 0x8 "CCR0,Core Control Register 0" bitfld.long 0x8 3. "CLKE,Processor B clock enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "HRM,Processor A Hardware Reset Mask" "0: MUB_CCR0[HR] is not masked and the hardware..,1: MUB_CCR0[HR] is masked and the hardware reset.." newline bitfld.long 0x8 1. "HR,Processor B Hardware Reset" "0: De-assert hardware reset to Processor B.,1: Assert hardware reset to Processor B." bitfld.long 0x8 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt issued,1: Non-maskable interrupt not issued" line.long 0xC "CIER0,Core Interrupt Enable Register 0" bitfld.long 0xC 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0xC 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disabled,1: Enabled" line.long 0x10 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x10 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x10 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Clear MUB_CCR0[NMI]" rgroup.long 0x1C++0x3 line.long 0x0 "CSR0,Core Status Register 0" bitfld.long 0x0 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Not in reset,1: In reset" group.long 0x100++0x3 line.long 0x0 "FCR,Flag Control Register" bitfld.long 0x0 2. "F2,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." bitfld.long 0x0 1. "F1,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." newline bitfld.long 0x0 0. "F0,MUA to MUB Flag n" "0: Clear MUB_FSR[Fn].,1: Set MUB_FSR[Fn]." rgroup.long 0x104++0x3 line.long 0x0 "FSR,Flag Status Register" bitfld.long 0x0 2. "F2,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." bitfld.long 0x0 1. "F1,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." newline bitfld.long 0x0 0. "F0,MUB to MUA-Side Flag n" "0: MUB_FCR[Fn] = 0.,1: MUB_FCR[Fn] = 1." group.long 0x110++0xB line.long 0x0 "GIER,General-purpose Interrupt Enable Register" bitfld.long 0x0 3. "GIE3,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "GIE2,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "GIE1,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "GIE0,MUA General-purpose Interrupt Enable n" "0: Disable,1: Enable" line.long 0x4 "GCR,General-purpose Control Register" bitfld.long 0x4 3. "GIR3,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 2. "GIR2,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" newline bitfld.long 0x4 1. "GIR1,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" bitfld.long 0x4 0. "GIR0,MUA General-purpose Interrupt Request n" "0: Not requested,1: Requested" line.long 0x8 "GSR,General-purpose Status Register" eventfld.long 0x8 3. "GIP3,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 2. "GIP2,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" newline eventfld.long 0x8 1. "GIP1,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" eventfld.long 0x8 0. "GIP0,MUA General-purpose Interrupt Request Pending n" "0: Not pending,1: Pending" group.long 0x120++0x3 line.long 0x0 "TCR,Transmit Control Register" bitfld.long 0x0 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x124++0x3 line.long 0x0 "TSR,Transmit Status Register" bitfld.long 0x0 3. "TE3,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 2. "TE2,MUA Transmit Register n Empty" "0: Not empty,1: Empty" newline bitfld.long 0x0 1. "TE1,MUA Transmit Register n Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "TE0,MUA Transmit Register n Empty" "0: Not empty,1: Empty" group.long 0x128++0x3 line.long 0x0 "RCR,Receive Control Register" bitfld.long 0x0 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" bitfld.long 0x0 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disable,1: Enable" rgroup.long 0x12C++0x3 line.long 0x0 "RSR,Receive Status Register" bitfld.long 0x0 3. "RF3,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 2. "RF2,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." newline bitfld.long 0x0 1. "RF1,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." bitfld.long 0x0 0. "RF0,MUA Receive Register n Full" "0: Not full,1: MUA_RRn register has received data from MUB TRn.." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "TR[$1],Transmit Register" hexmask.long 0x0 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x280)++0x3 line.long 0x0 "RR[$1],Receive Register" hexmask.long 0x0 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end tree.end tree "NETC (Ethernet Controller Domain)" base ad:0x0 tree "NETC_BLK_CTRL_NETCMIX" base ad:0x4C810000 group.long 0x0++0x23 line.long 0x0 "MQS_SETTING,MQS Settings" hexmask.long.byte 0x0 9.--16. 1. "CLK_DIVIDE,clock divide factor configuration" bitfld.long 0x0 4. "OVERSAMPLE,Oversample enable" "0,1" bitfld.long 0x0 3. "SOFT_RESET,Software Reset" "0,1" bitfld.long 0x0 2. "MQS_EN,MQS Enable" "0,1" bitfld.long 0x0 0.--1. "SAI_SEL,sai.ipg_clk_sai_mclk selection" "0,1,2,3" line.long 0x4 "SAI_CLK_SEL,SAI clock select" hexmask.long.byte 0x4 6.--10. 1. "SAI2_MCLK3,selection signal for sai2.sai_mclk_in[3]" hexmask.long.byte 0x4 1.--5. 1. "SAI2_MCLK2,selection signal for sai2.sai_mclk_in[2]" bitfld.long 0x4 0. "SAI2_MCLK1,selection signal for sai2.ipg_clk_sai_mclk" "0,1" line.long 0x8 "IPG_DEBUG_SAI2,Each core's debug mode" bitfld.long 0x8 7. "IPG_DEBUG_M7,m7 in debug mode" "0,1" bitfld.long 0x8 6. "IPG_DEBUG_CM33,cm33 in debug mode" "0,1" bitfld.long 0x8 5. "IPG_DEBUG_CA55_CORE5,ca55 core5 in debug mode" "0,1" bitfld.long 0x8 4. "IPG_DEBUG_CA55_CORE4,ca55 core4 in debug mode" "0,1" bitfld.long 0x8 3. "IPG_DEBUG_CA55_CORE3,ca55 core3 in debug mode" "0,1" newline bitfld.long 0x8 2. "IPG_DEBUG_CA55_CORE2,ca55 core2 in debug mode" "0,1" bitfld.long 0x8 1. "IPG_DEBUG_CA55_CORE1,ca55 core1 in debug mode" "0,1" bitfld.long 0x8 0. "IPG_DEBUG_CA55_CORE0,ca55 core0 in debug mode" "0,1" line.long 0xC "CFG_LINK_IO_VAR,netc cfg_link_io_var" hexmask.long.byte 0xC 8.--11. 1. "CFG_LINK_IO_VAR_2,cfg_link_io_var link2" hexmask.long.byte 0xC 4.--7. 1. "CFG_LINK_IO_VAR_1,cfg_link_io_var link1" hexmask.long.byte 0xC 0.--3. 1. "CFG_LINK_IO_VAR_0,cfg_link_io_var link0" line.long 0x10 "CFG_LINK_MII_PROT,netc cfg_link_mii_prot" hexmask.long.byte 0x10 8.--11. 1. "CFG_LINK_MII_PROT_2,netc cfg_link_mii_prot link2" hexmask.long.byte 0x10 4.--7. 1. "CFG_LINK_MII_PROT_1,netc cfg_link_mii_prot link1" hexmask.long.byte 0x10 0.--3. 1. "CFG_LINK_MII_PROT_0,netc cfg_link_mii_prot link0" line.long 0x14 "CFG_LINK_PCS_PROT_0,netc cfg_link_pcs_prot link0" hexmask.long.word 0x14 0.--15. 1. "CFG_LINK_PCS_PROT_0,netc cfg_link_pcs_prot link0" line.long 0x18 "CFG_LINK_PCS_PROT_1,netc cfg_link_pcs_prot link1" hexmask.long.word 0x18 0.--15. 1. "CFG_LINK_PCS_PROT_1,netc cfg_link_pcs_prot link1" line.long 0x1C "CFG_LINK_PCS_PROT_2,netc cfg_link_pcs_prot link2" hexmask.long.word 0x1C 0.--15. 1. "CFG_LINK_PCS_PROT_2,netc cfg_link_pcs_prot link2" line.long 0x20 "CFG_SRC_ID,netc cfg_src_id" hexmask.long.byte 0x20 0.--7. 1. "CFG_SRC_ID,netc cfgsrc_id" tree.end tree "NETC_EMDIO" base ad:0x4CDC0000 group.long 0x1C00++0xF line.long 0x0 "EMDIO_CFG,External MDIO configuration register" rbitfld.long 0x0 31. "BSY1,MDIO busy" "0,1" eventfld.long 0x0 30. "CMP,MDIO command completion event. Bit is cleared by writing `1'." "0,1" bitfld.long 0x0 29. "CIM,MDIO command completion interrupt enable mask." "0,1" eventfld.long 0x0 28. "ADDR_ERR,Address error" "0,1" bitfld.long 0x0 23. "NEG,NEG edge select" "0,1" bitfld.long 0x0 22. "EHOLD,Extended HOLD select" "0,1" newline rbitfld.long 0x0 16.--18. "WHOAMI,Returns the virtual port ID." "0,1,2,3,4,5,6,7" hexmask.long.word 0x0 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor." bitfld.long 0x0 6. "ENC45,Enable Clause 45 support." "0,1" bitfld.long 0x0 5. "PRE_DIS,MDIO preamble disable." "0,1" bitfld.long 0x0 2.--4. "MDIO_HOLD,MDIO hold time" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY2,MDIO busy (same as bit 31)" "0,1" line.long 0x4 "EMDIO_CTL,External MDIO interface control register" rbitfld.long 0x4 31. "BSY,MDIO busy" "0,1" bitfld.long 0x4 15. "READ,MDIO read initiation." "0,1" bitfld.long 0x4 14. "POST_INC,MDIO read with address post-increment initiation. Self-clearing once transaction is complete." "0,1" hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" line.long 0x8 "EMDIO_DATA,External MDIO interface data register" hexmask.long.word 0x8 0.--15. 1. "MDIO_DATA,16-bit MDIO data." line.long 0xC "EMDIO_ADDR,External MDIO register address register" hexmask.long.word 0xC 0.--15. 1. "REGADDR,MDIO PHY register address." rgroup.long 0x1C10++0x3 line.long 0x0 "EMDIO_STAT,External MDIO status register" bitfld.long 0x0 19. "REQ_TYPE,Port ID" "0,1" bitfld.long 0x0 16.--18. "PORT_ID,Port ID" "0,1,2,3,4,5,6,7" bitfld.long 0x0 15. "WHT_LIST_ENA,PHY white list enable" "0,1" hexmask.long.byte 0x0 8.--12. 1. "WHT_LIST,PHY white list" bitfld.long 0x0 0. "BSY,Global MDIO busy" "0,1" group.long 0x1C20++0x7 line.long 0x0 "PHY_STATUS_CFG,PHY status configuration register" hexmask.long.word 0x0 16.--31. 1. "STATUS_INTERVAL,PHY status read interval" rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" rbitfld.long 0x0 0. "BSY,MDIO busy" "0,1" line.long 0x4 "PHY_STATUS_CTL,PHY status control register" hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" rgroup.long 0x1C28++0x3 line.long 0x0 "PHY_STATUS_DATA,PHY status data register" hexmask.long.word 0x0 16.--31. 1. "CURR_CNT,Current count" hexmask.long.word 0x0 0.--15. 1. "MDIO_DATA,16-bit MDIO data" group.long 0x1C2C++0xB line.long 0x0 "PHY_STATUS_ADDR,PHY status register address register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address. Address of the register within the Clause 45 PHY device from which data is to be read." line.long 0x4 "PHY_STATUS_EVENT,PHY status event register" hexmask.long.word 0x4 16.--31. 1. "STATUS_EVENT_LH,Status event low-to-high. Set to 1 if a 0->1 transition on a corresponding data bit has occurred. Write 1 to clear." hexmask.long.word 0x4 0.--15. 1. "STATUS_EVENT_HL,Status event high-to-low. Set to 1 if a 1->0 transition on a corresponding data bit has occurred. Write 1 to clear." line.long 0x8 "PHY_STATUS_MASK,PHY status mask register" hexmask.long.word 0x8 16.--31. 1. "STATUS_MASK_LH,Status mask low-to-high. If set to 1 assert an interrupt if the corresponding event bit is set." hexmask.long.word 0x8 0.--15. 1. "STATUS_MASK_HL,Status high-to-low mask. If set to 1 assert an interrupt if the corresponding event bit is set." rgroup.long 0x1C40++0x3 line.long 0x0 "MDIO_CFG,MDIO configuration register" bitfld.long 0x0 5. "MDC_MODE,MDC pin mode" "0,1" bitfld.long 0x0 4. "MDIO_MODE,MDIO pin mode" "0,1" tree.end tree "NETC_ETH_LINK" tree "ENETC0_PORT" base ad:0x4CC14000 group.long 0x1008++0x3 line.long 0x0 "PM0_COMMAND_CONFIG,Port MAC 0 Command and Configuration Register" bitfld.long 0x0 31. "MG,Magic Packet detection enable." "0,1" newline bitfld.long 0x0 30. "TS_MODE,Transmit timestamp mode" "0,1" newline bitfld.long 0x0 28. "RX_FLUSH,Ingress flush enable" "0,1" newline bitfld.long 0x0 26. "SWR,Software Reset. Self clearing bit." "0,1" newline bitfld.long 0x0 23. "TX_LOWP_ENA,Transmit Low Power Idle Enable." "0: (default) the MAC operates in normal mode.,1: The MAC completes the transmission of the.." newline bitfld.long 0x0 22. "TX_FLUSH,Tx flush" "0,1" newline bitfld.long 0x0 18. "HD_FCEN,Half Duplex Flow Control Enable" "0,1" newline bitfld.long 0x0 15. "TXP,Enable padding of frames in transmit direction (1 default)." "0,1" newline bitfld.long 0x0 14. "TS_PNT,Timestamp Point" "0,1" newline bitfld.long 0x0 13. "CNT_FRM_EN,Control frame reception enable" "0,1" newline bitfld.long 0x0 11.--12. "LPBK_MODE,Loopback mode" "0,1,2,3" newline bitfld.long 0x0 10. "LOOP_ENA,Loopback enable" "0,1" newline bitfld.long 0x0 8. "PAUSE_IGN,Ignore PAUSE frame quanta" "0,1" newline bitfld.long 0x0 7. "PAUSE_FWD,Terminate/forward received PAUSE frames" "0,1" newline bitfld.long 0x0 1. "RX_EN,MAC receive path enable" "0,1" newline bitfld.long 0x0 0. "TX_EN,MAC transmit path enable" "0,1" rgroup.long 0x100C++0x7 line.long 0x0 "PM0_MAC_ADDR_0,Port MAC 0 MAC Address Register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR_0,MAC address 0" line.long 0x4 "PM0_MAC_ADDR_1,Port MAC 0 MAC Address Register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR_1,MAC address 1" group.long 0x1014++0x3 line.long 0x0 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register" hexmask.long.word 0x0 16.--31. 1. "TX_MTU,Maximum transmit frame length" newline hexmask.long.word 0x0 0.--15. 1. "MAXFRM,Maximum supported received frame length." group.long 0x103C++0x7 line.long 0x0 "PM0_MDIO_ADDR,Port MAC 0 Internal MDIO Register Address Register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address." line.long 0x4 "PM0_IEVENT,Port MAC 0 Interrupt Event Register" eventfld.long 0x4 28. "MRG_AERR,MAC merge frame assembly error event" "0,1" newline eventfld.long 0x4 27. "MRG_SERR,MAC merge frame SMD error received event" "0,1" newline eventfld.long 0x4 23. "SPD_DUP,Speed/Duplex Change" "0,1" newline eventfld.long 0x4 22. "RX_CSD,Rx Clock Stop Detection" "0,1" newline eventfld.long 0x4 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline eventfld.long 0x4 14. "MGI,Magic packet detection indication event" "0,1" newline eventfld.long 0x4 12. "RX_OVFL,Receive FIFO overflow event." "0,1" newline eventfld.long 0x4 11. "TX_UNFL,Transmit FIFO underflow event." "0,1" newline eventfld.long 0x4 10. "TX_OVFL,Transmit FIFO overflow event." "0,1" newline rbitfld.long 0x4 6. "RX_EMPTY,Receive idle event" "0,1" newline rbitfld.long 0x4 5. "TX_EMPTY,Transmit FIFO empty event" "0,1" newline rbitfld.long 0x4 4. "RX_LOWP,Low Power Idle event" "0,1" group.long 0x104C++0x3 line.long 0x0 "PM0_IMASK,Port MAC 0 Interrupt Mask Register(INT_MASK)" bitfld.long 0x0 28. "MRG_AERR,MAC merge frame assembly error event interrupt mask" "0,1" newline bitfld.long 0x0 27. "MRG_SERR,MAC merge frame SMD error received event interrupt mask" "0,1" newline bitfld.long 0x0 23. "SPD_DUP,Speed/Duplex change event mask." "0,1" newline bitfld.long 0x0 22. "RX_CSD,Rx Clock Stop Detection" "0,1" newline bitfld.long 0x0 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline bitfld.long 0x0 14. "MGI,Magic packet detection indication event mask." "0,1" group.long 0x1054++0x3 line.long 0x0 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register" hexmask.long.word 0x0 0.--15. 1. "PQNT,Value to be used for the quanta value when XOFF is triggered." group.long 0x1064++0x3 line.long 0x0 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register" hexmask.long.word 0x0 0.--15. 1. "QTH,Quanta threshold." rgroup.long 0x1074++0x3 line.long 0x0 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register" bitfld.long 0x0 0. "PSTAT,Pause status." "0,1" group.long 0x10B8++0xB line.long 0x0 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register" hexmask.long.tbyte 0x0 0.--23. 1. "TW_SYS_TX,EEE System transmit wait time" line.long 0x4 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register" hexmask.long.tbyte 0x4 0.--23. 1. "SLEEPT,Defines the number of NETC cycles (which represents time) where Tx is idle before mac transmits low power EEE" line.long 0x8 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register" bitfld.long 0x8 31. "EN,IEEE-1588 Single-Step enable." "0,1" newline hexmask.long.word 0x8 7.--15. 1. "OFFSET,Start offset from the beginning of a frame where the field to update is found (index to MS byte)" newline bitfld.long 0x8 6. "CH,Checksum update" "0,1" group.long 0x10D0++0x7 line.long 0x0 "PM0_HD_BACKOFF_ENTROPY,Port MAC 0 half-duplex backoff entropy register" bitfld.long 0x0 31. "SW_ENTROPY_VALID,SW programmable entropy valid" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "HD_BACKOFF_ENTROPY,Half duplex backoff entropy" line.long 0x4 "PM0_HD_FLOW_CTRL,Port MAC 0 Half-Duplex Flow Control Register" hexmask.long.word 0x4 16.--27. 1. "HD_BP_ON_MAX,Half-Duplex Back-Pressure On Maximum" newline hexmask.long.word 0x4 0.--11. 1. "HD_BP_OFF_MIN,Half-Duplex Back-Pressure Off Minimum" group.long 0x10E0++0x3 line.long 0x0 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register" bitfld.long 0x0 3. "WEN,Write enable for Tx/Rx stats registers" "0,1" newline eventfld.long 0x0 2. "CLR,1 - all counters will be reset to 0" "?,1: all counters will be reset to 0" newline bitfld.long 0x0 1. "COD,0 - (default) counters are not affected by read.1 - a read to a counter resets it to 0." "?,1: a read to a counter resets it to 0" newline bitfld.long 0x0 0. "SAT,0 - (default) counters are wrapping around1- the counters saturate at the maximum value" "?,1: the counters saturate at the maximum value" rgroup.quad 0x1100++0xF line.quad 0x0 "PM0_REOCTn,Port MAC 0 Receive Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "REOCTn,Incremented for each octet received in both good and bad packets." line.quad 0x8 "PM0_ROCTn,Port MAC 0 Receive Octets Counter(iflnOctetsn)" hexmask.quad 0x8 0.--63. 1. "ROCTn,Incremented for each octet received except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames received." rgroup.quad 0x1118++0xB7 line.quad 0x0 "PM0_RXPFn,Port MAC 0 Receive Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "RXPFn,Incremented for each valid PAUSE frame received ." line.quad 0x8 "PM0_RFRMn,Port MAC 0 Receive Frame Counter Register(aFramesReceivedOKn)" hexmask.quad 0x8 0.--63. 1. "RFRMn,Incremented for each frame received without error including PAUSE frames." line.quad 0x10 "PM0_RFCSn,Port MAC 0 Receive Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "RFCSn,Incremented for each frame received with a CRC-32 error but the frame is otherwise of correct length." line.quad 0x18 "PM0_RVLANn,Port MAC 0 Receive VLAN Frame Counter Register(VLANReceivedOKn)" hexmask.quad 0x18 0.--63. 1. "RVLANn,Incremented for each valid VLAN tagged frame received with ethertype 0x8100" line.quad 0x20 "PM0_RERRn,Port MAC 0 Receive Frame Error Counter Register(ifInErrorsn)" hexmask.quad 0x20 0.--63. 1. "RERRn,Incremented for each frame received with an error (except for undersized/fragment frame):" line.quad 0x28 "PM0_RUCAn,Port MAC 0 Receive Unicast Frame Counter Register(ifInUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "RUCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 0 ." line.quad 0x30 "PM0_RMCAn,Port MAC 0 Receive Multicast Frame Counter Register(ifInMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "RMCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1)" line.quad 0x38 "PM0_RBCAn,Port MAC 0 Receive Broadcast Frame Counter Register(ifInBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "RBCAn,Incremented for each valid frame received(on the receive FIFO interface) in which all bits of the destination address were 1 ." line.quad 0x40 "PM0_RDRPn,Port MAC 0 Receive Dropped Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0x40 0.--63. 1. "RDRPn,Incremented for each dropped packet due to internal errors of the MAC client" line.quad 0x48 "PM0_RPKTn,Port MAC 0 Receive Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x48 0.--63. 1. "RPKTn,Incremented for each good or bad packet received." line.quad 0x50 "PM0_RUNDn,Port MAC 0 Receive Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x50 0.--63. 1. "RUNDn,Incremented for each packet received that was less than 64 octets and greater than or equal to 18 octets" line.quad 0x58 "PM0_R64n,Port MAC 0 Receive 64-Octet Packet Counter Register(etherStatsPkts64OctetsN)" hexmask.quad 0x58 0.--63. 1. "R64n,Incremented for each 64-octet frame received good or bad." line.quad 0x60 "PM0_R127n,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register(etherStatsPkts65to127OctetsN)" hexmask.quad 0x60 0.--63. 1. "R127n,Incremented for each 65- to 127-octet frame received good or bad." line.quad 0x68 "PM0_R255n,Port MAC 0 Receive 128 to 255-Octet Packet Counter Register(etherStatsPkts128to255OctetsN)" hexmask.quad 0x68 0.--63. 1. "R255n,Incremented for each 128- to 255-octet frame received good or bad." line.quad 0x70 "PM0_R511n,Port MAC 0 Receive 256 to 511-Octet Packet Counter Register(etherStatsPkts256to511OctetsN)" hexmask.quad 0x70 0.--63. 1. "R511n,Incremented for each 256- to 511-octet frame received good or bad." line.quad 0x78 "PM0_R1023n,Port MAC 0 Receive 512 to 1023-Octet Packet Counter Register(etherStatsPkts512to1023OctetsN)" hexmask.quad 0x78 0.--63. 1. "R1023n,Incremented for each 512- to 1023-octet frame received good or bad." line.quad 0x80 "PM0_R1522n,Port MAC 0 Receive 1024 to 1522-Octet Packet Counter Register(etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x80 0.--63. 1. "R1522n,Incremented for each 1024- to 1522-octet frame received good or bad." line.quad 0x88 "PM0_R1523Xn,Port MAC 0 Receive 1523 to Max-Octet Packet Counter Register(etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x88 0.--63. 1. "R1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[MAXFRM]) received good or bad" line.quad 0x90 "PM0_ROVRn,Port MAC 0 Receive Oversized Packet Counter Register(etherStatsOversizePktsn)" hexmask.quad 0x90 0.--63. 1. "ROVRn,Incremented for each packet which is larger than the maximum frame length specified in the MAXFRM(FRAME_LENGTH) register (excluding framing bits but including FCS octets) received with a good frame check sequence" line.quad 0x98 "PM0_RJBRn,Port MAC 0 Receive Jabber Packet Counter Register(etherStatsJabbersn)" hexmask.quad 0x98 0.--63. 1. "RJBRn,Incremented for each packet which is larger than the maximum frame length specified in register PMa_MAXFRM[MAXFRM] (excluding framing bits but including FCS octets) received with a bad frame check sequence" line.quad 0xA0 "PM0_RFRGn,Port MAC 0 Receive Fragment Packet Counter Register(etherStatsFragmentsn" hexmask.quad 0xA0 0.--63. 1. "RFRGn,Incremented for each packet which is shorter than 64 bytes and received with a wrong CRC" line.quad 0xA8 "PM0_RCNPn,Port MAC 0 Receive Control Packet Counter Register" hexmask.quad 0xA8 0.--63. 1. "RCNPn,Incremented for each valid control packet (type 0x8808) but not for PAUSE packets" line.quad 0xB0 "PM0_RDRNTPn,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0xB0 0.--63. 1. "RDRNTPn,Incremented for each fully dropped packet (not truncated) due to internal errors of the MAC client. Occurs when a receive FIFO overflows." rgroup.quad 0x1200++0xF line.quad 0x0 "PM0_TEOCTn,Port MAC 0 Transmit Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "TEOCTn,Incremented for each octet transmitted in both good and bad packets." line.quad 0x8 "PM0_TOCTn,Port MAC 0 Transmit Octets Counter Register(ifOutOctetsn)" hexmask.quad 0x8 0.--63. 1. "TOCTn,Incremented for each octet transmitted except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames transmitted" rgroup.quad 0x1218++0x3F line.quad 0x0 "PM0_TXPFn,Port MAC 0 Transmit Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "TXPFn,Incremented for each valid PAUSE frame transmitted . Note: Pause frames forwarded to the MAC from MAC Client are not counted by TXPFn." line.quad 0x8 "PM0_TFRMn,Port MAC 0 Transmit Frame Counter Register(aFramesTransmittedOKn)" hexmask.quad 0x8 0.--63. 1. "TFRMn,Incremented for each frame transmitted without error including PAUSE frames." line.quad 0x10 "PM0_TFCSn,Port MAC 0 Transmit Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "TFCSn,Incremented for each frame transmitted with a CRC-32 error except for underflows." line.quad 0x18 "PM0_TVLANn,Port MAC 0 Transmit VLAN Frame Counter Register(VLANTransmittedOKn)" hexmask.quad 0x18 0.--63. 1. "TVLANn,Incremented for each valid VLAN tagged frame transmitted with ethertype 0x8100." line.quad 0x20 "PM0_TERRn,Port MAC 0 Transmit Frame Error Counter Register(ifOutErrorsn)" hexmask.quad 0x20 0.--63. 1. "TERRn,Transmit frame error count" line.quad 0x28 "PM0_TUCAn,Port MAC 0 Transmit Unicast Frame Counter Register(ifOutUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "TUCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 0." line.quad 0x30 "PM0_TMCAn,Port MAC 0 Transmit Multicast Frame Counter Register(ifOutMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "TMCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1 )" line.quad 0x38 "PM0_TBCAn,Port MAC 0 Transmit Broadcast Frame Counter Register(ifOutBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "TBCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which all bits of the destination address were 1 ." rgroup.quad 0x1260++0x47 line.quad 0x0 "PM0_TPKTn,Port MAC 0 Transmit Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x0 0.--63. 1. "TPKTn,Incremented for each good or bad packet transmitted." line.quad 0x8 "PM0_TUNDn,Port MAC 0 Transmit Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x8 0.--63. 1. "TUNDn,Incremented for each packet transmitted that was less than 64 octets long with a good CRC." line.quad 0x10 "PM0_T64n,Port MAC 0 Transmit 64-Octet Packet Counter Register (etherStatsPkts64OctetsN)" hexmask.quad 0x10 0.--63. 1. "T64n,Incremented for each 64-octet frame transmitted good or bad." line.quad 0x18 "PM0_T127n,Port MAC 0 Transmit 65 to 127-Octet Packet Counter Register (etherStatsPkts65to127OctetsN)" hexmask.quad 0x18 0.--63. 1. "T127n,Incremented for each 65 to 127-octet frame transmitted good or bad." line.quad 0x20 "PM0_T255n,Port MAC 0 Transmit 128 to 255-Octet Packet Counter Register (etherStatsPkts128to255OctetsN)" hexmask.quad 0x20 0.--63. 1. "T255n,Incremented for each 128 to 255-octet frame transmitted good or bad." line.quad 0x28 "PM0_T511n,Port MAC 0 Transmit 256 to 511-Octet Packet Counter Register (etherStatsPkts256to511OctetsN)" hexmask.quad 0x28 0.--63. 1. "T511n,Incremented for each 256 to 511-octet frame transmitted good or bad." line.quad 0x30 "PM0_T1023n,Port MAC 0 Transmit 512 to 1023-Octet Packet Counter Register (etherStatsPkts512to1023OctetsN)" hexmask.quad 0x30 0.--63. 1. "T1023n,Incremented for each 512 to 1023-octet frame transmitted good or bad." line.quad 0x38 "PM0_T1522n,Port MAC 0 Transmit 1024 to 1522-Octet Packet Counter Register (etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x38 0.--63. 1. "T1522n,Incremented for each 1024- to 1522-octet frame transmitted good or bad." line.quad 0x40 "PM0_T1523Xn,Port MAC 0 Transmit 1523 to TX_MTU-Octet Packet Counter Register (etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x40 0.--63. 1. "T1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[TX_MTU]) transmitted good or bad" rgroup.quad 0x12C0++0x7 line.quad 0x0 "PM0_TCNPn,Port MAC 0 Transmit Control Packet Counter Register" hexmask.quad 0x0 0.--63. 1. "TCNPn,Incremented for each valid control packet transmitted (type 0x8808) but not for PAUSE packets" rgroup.quad 0x12D0++0x27 line.quad 0x0 "PM0_TDFRn,Port MAC 0 Transmit Deferred Packet Counter Register(aFramesWithDeferredXmissions)" hexmask.quad 0x0 0.--63. 1. "TDFRn,Increments for successful transmissions without retransmits that were deferred (half-duplex only)." line.quad 0x8 "PM0_TMCOLn,Port MAC 0 Transmit Multiple Collisions Counter Register(aMultipleCollisionFrames)" hexmask.quad 0x8 0.--63. 1. "TMCOLn,Increments for successful transmission after more than one retransmission (half-duplex only)." line.quad 0x10 "PM0_TSCOLn,Port MAC 0 Transmit Single Collision Counter(aSingleCollisionFrames) Register" hexmask.quad 0x10 0.--63. 1. "TSCOLn,Increments for successful transmission after one retransmission (half-duplex only)." line.quad 0x18 "PM0_TLCOLn,Port MAC 0 Transmit Late Collision Counter(aLateCollisions) Register" hexmask.quad 0x18 0.--63. 1. "TLCOLn,Late collision occurred. Frame corrupted / discarded (half-duplex only)" line.quad 0x20 "PM0_TECOLn,Port MAC 0 Transmit Excessive Collisions Counter Register" hexmask.quad 0x20 0.--63. 1. "TECOLn,Excessive collisions occurred. Frame was discarded (half-duplex only)" group.long 0x1300++0x3 line.long 0x0 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register" bitfld.long 0x0 15. "ENA,AN Enable" "0: SSP and SFD bits determine the RGMII link speed..,1: RGMII Auto-Negotiation Enabled - PHY in-band.." newline bitfld.long 0x0 13.--14. "SSP,Set Speed" "0: 100 Mbps,1: 10 Mbps,2: 1 Gbps,?" newline bitfld.long 0x0 12. "CLK_STOP,Clock Stop" "0: Not stoppable,1: Stoppable" newline bitfld.long 0x0 6. "HD,Half-duplex" "0: full duplex,1: half duplex" newline bitfld.long 0x0 4. "M10,0 - 100 Mbps RMII 1 - 10 Mbps RMII" "0: 100 Mbps,1: 10 Mbps" newline bitfld.long 0x0 3. "REVMII,Reverse Mode" "0: Reverse mode disabled - port is in MAC mode,1: Reverse mode enabled - port is in PHY mode" newline bitfld.long 0x0 0.--2. "IFMODE,Interface mode" "0,1,2,3,4,5,6,7" rgroup.long 0x1304++0x3 line.long 0x0 "PM0_IF_STATUS,Port MAC 0 Interface Status Register" bitfld.long 0x0 15. "RGLNK,RGMII link" "0,1" newline bitfld.long 0x0 13.--14. "RGSP,RGMII speed setting" "0,1,2,3" newline bitfld.long 0x0 12. "RGFD,RGMII full duplex" "0,1" group.long 0x1408++0x3 line.long 0x0 "PM1_COMMAND_CONFIG,Port MAC 1 Command and Configuration Register" bitfld.long 0x0 31. "MG,Magic Packet detection enable." "0,1" newline bitfld.long 0x0 30. "TS_MODE,Transmit timestamp mode" "0,1" newline bitfld.long 0x0 28. "RX_FLUSH,Ingress flush enable" "0,1" newline bitfld.long 0x0 26. "SWR,Software Reset. Self clearing bit." "0,1" newline bitfld.long 0x0 23. "TX_LOWP_ENA,Transmit Low Power Idle Enable." "0: (default) the MAC operates in normal mode.,1: The MAC completes the transmission of the.." newline bitfld.long 0x0 22. "TX_FLUSH,Tx flush" "0,1" newline bitfld.long 0x0 18. "HD_FCEN,Half Duplex Flow Control Enable" "0,1" newline bitfld.long 0x0 15. "TXP,Enable padding of frames in transmit direction (1 default)." "0,1" newline bitfld.long 0x0 14. "TS_PNT,Timestamp Point" "0,1" newline bitfld.long 0x0 13. "CNT_FRM_EN,Control frame reception enable" "0,1" newline bitfld.long 0x0 11.--12. "LPBK_MODE,Loopback mode" "0,1,2,3" newline bitfld.long 0x0 10. "LOOP_ENA,Loopback enable" "0,1" newline bitfld.long 0x0 8. "PAUSE_IGN,Ignore PAUSE frame quanta" "0,1" newline bitfld.long 0x0 7. "PAUSE_FWD,Terminate/forward received PAUSE frames" "0,1" newline bitfld.long 0x0 1. "RX_EN,MAC receive path enable" "0,1" newline bitfld.long 0x0 0. "TX_EN,MAC transmit path enable" "0,1" rgroup.long 0x140C++0x7 line.long 0x0 "PM1_MAC_ADDR_0,Port MAC 1 MAC Address Register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR_0,MAC address 0" line.long 0x4 "PM1_MAC_ADDR_1,Port MAC 1 MAC Address Register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR_1,MAC address 1" group.long 0x1414++0x3 line.long 0x0 "PM1_MAXFRM,Port MAC 1 Maximum Frame Length Register" hexmask.long.word 0x0 16.--31. 1. "TX_MTU,Maximum transmit frame length" newline hexmask.long.word 0x0 0.--15. 1. "MAXFRM,Maximum supported received frame length." group.long 0x1440++0x3 line.long 0x0 "PM1_IEVENT,Port MAC 1 Interrupt Event Register" eventfld.long 0x0 28. "MRG_AERR,MAC merge frame assembly error event" "0,1" newline eventfld.long 0x0 27. "MRG_SERR,MAC merge frame SMD error received event" "0,1" newline eventfld.long 0x0 23. "SPD_DUP,Speed/Duplex Change" "0,1" newline eventfld.long 0x0 22. "RX_CSD,Rx Clock Stop Detection" "0,1" newline eventfld.long 0x0 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline eventfld.long 0x0 14. "MGI,Magic packet detection indication event" "0,1" newline eventfld.long 0x0 12. "RX_OVFL,Receive FIFO overflow event." "0,1" newline eventfld.long 0x0 11. "TX_UNFL,Transmit FIFO underflow event." "0,1" newline eventfld.long 0x0 10. "TX_OVFL,Transmit FIFO overflow event." "0,1" newline rbitfld.long 0x0 6. "RX_EMPTY,Receive idle event" "0,1" newline rbitfld.long 0x0 5. "TX_EMPTY,Transmit FIFO empty event" "0,1" group.long 0x144C++0x3 line.long 0x0 "PM1_IMASK,Port MAC 1 Interrupt Mask Register(INT_MASK)" bitfld.long 0x0 28. "MRG_AERR,MAC merge frame assembly error event interrupt mask" "0,1" newline bitfld.long 0x0 27. "MRG_SERR,MAC merge frame SMD error received event interrupt mask" "0,1" newline bitfld.long 0x0 23. "SPD_DUP,Speed/Duplex change event mask." "0,1" newline bitfld.long 0x0 22. "RX_CSD,Rx Clock Stop Detection" "0,1" newline bitfld.long 0x0 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline bitfld.long 0x0 14. "MGI,Magic packet detection indication event mask." "0,1" group.long 0x1454++0x3 line.long 0x0 "PM1_PAUSE_QUANTA,Port MAC 1 Pause Quanta Register" hexmask.long.word 0x0 0.--15. 1. "PQNT,Value to be used for the quanta value when XOFF is triggered." group.long 0x1464++0x3 line.long 0x0 "PM1_PAUSE_THRESH,Port MAC 1 Pause Quanta Threshold Register" hexmask.long.word 0x0 0.--15. 1. "QTH,Quanta threshold." rgroup.long 0x1474++0x3 line.long 0x0 "PM1_RX_PAUSE_STATUS,Port MAC 1 Receive Pause Status Register" bitfld.long 0x0 0. "PSTAT,Pause status." "0,1" group.long 0x14B8++0xB line.long 0x0 "PM1_LPWAKE_TIMER,Port MAC 1 EEE Low Power Wakeup Timer Register" hexmask.long.tbyte 0x0 0.--23. 1. "TW_SYS_TX,EEE System transmit wait time" line.long 0x4 "PM1_SLEEP_TIMER,Port MAC 1 Transmit EEE Low Power Timer Register" hexmask.long.tbyte 0x4 0.--23. 1. "SLEEPT,Defines the number of NETC cycles (which represents time) where Tx is idle before mac transmits low power EEE" line.long 0x8 "PM1_SINGLE_STEP,Port MAC 1 IEEE1588 Single-Step Control Register" bitfld.long 0x8 31. "EN,IEEE-1588 Single-Step enable." "0,1" newline hexmask.long.word 0x8 7.--15. 1. "OFFSET,Start offset from the beginning of a frame where the field to update is found (index to MS byte)" newline bitfld.long 0x8 6. "CH,Checksum update" "0,1" group.long 0x14D0++0x7 line.long 0x0 "PM1_HD_BACKOFF_ENTROPY,Port MAC 1 half-duplex backoff entropy register" bitfld.long 0x0 31. "SW_ENTROPY_VALID,SW programmable entropy valid" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "HD_BACKOFF_ENTROPY,Half duplex backoff entropy" line.long 0x4 "PM1_HD_FLOW_CTRL,Port MAC 1 Half-Duplex Flow Control Register" hexmask.long.word 0x4 16.--27. 1. "HD_BP_ON_MAX,Half-Duplex Back-Pressure On Maximum" newline hexmask.long.word 0x4 0.--11. 1. "HD_BP_OFF_MIN,Half-Duplex Back-Pressure Off Minimum" group.long 0x14E0++0x3 line.long 0x0 "PM1_STATN_CONFIG,Port MAC 1 Statistics Configuration Register" bitfld.long 0x0 3. "WEN,Write enable for Tx/Rx stats registers" "0,1" newline eventfld.long 0x0 2. "CLR,1 - all counters will be reset to 0" "?,1: all counters will be reset to 0" newline bitfld.long 0x0 1. "COD,0 - (default) counters are not affected by read.1 - a read to a counter resets it to 0." "?,1: a read to a counter resets it to 0" newline bitfld.long 0x0 0. "SAT,0 - (default) counters are wrapping around1- the counters saturate at the maximum value" "?,1: the counters saturate at the maximum value" rgroup.quad 0x1500++0xF line.quad 0x0 "PM1_REOCTn,Port MAC 1 Receive Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "REOCTn,Incremented for each octet received in both good and bad packets." line.quad 0x8 "PM1_ROCTn,Port MAC 1 Receive Octets Counter(iflnOctetsn)" hexmask.quad 0x8 0.--63. 1. "ROCTn,Incremented for each octet received except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames received." rgroup.quad 0x1518++0xB7 line.quad 0x0 "PM1_RXPFn,Port MAC 1 Receive Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "RXPFn,Incremented for each valid PAUSE frame received ." line.quad 0x8 "PM1_RFRMn,Port MAC 1 Receive Frame Counter Register(aFramesReceivedOKn)" hexmask.quad 0x8 0.--63. 1. "RFRMn,Incremented for each frame received without error including PAUSE frames." line.quad 0x10 "PM1_RFCSn,Port MAC 1 Receive Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "RFCSn,Incremented for each frame received with a CRC-32 error but the frame is otherwise of correct length." line.quad 0x18 "PM1_RVLANn,Port MAC 1 Receive VLAN Frame Counter Register(VLANReceivedOKn)" hexmask.quad 0x18 0.--63. 1. "RVLANn,Incremented for each valid VLAN tagged frame received with ethertype 0x8100" line.quad 0x20 "PM1_RERRn,Port MAC 1 Receive Frame Error Counter Register(ifInErrorsn)" hexmask.quad 0x20 0.--63. 1. "RERRn,Incremented for each frame received with an error (except for undersized/fragment frame):" line.quad 0x28 "PM1_RUCAn,Port MAC 1 Receive Unicast Frame Counter Register(ifInUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "RUCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 0 ." line.quad 0x30 "PM1_RMCAn,Port MAC 1 Receive Multicast Frame Counter Register(ifInMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "RMCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1)" line.quad 0x38 "PM1_RBCAn,Port MAC 1 Receive Broadcast Frame Counter Register(ifInBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "RBCAn,Incremented for each valid frame received(on the receive FIFO interface) in which all bits of the destination address were 1 ." line.quad 0x40 "PM1_RDRPn,Port MAC 1 Receive Dropped Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0x40 0.--63. 1. "RDRPn,Incremented for each dropped packet due to internal errors of the MAC client" line.quad 0x48 "PM1_RPKTn,Port MAC 1 Receive Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x48 0.--63. 1. "RPKTn,Incremented for each good or bad packet received." line.quad 0x50 "PM1_RUNDn,Port MAC 1 Receive Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x50 0.--63. 1. "RUNDn,Incremented for each packet received that was less than 64 octets and greater than or equal to 18 octets" line.quad 0x58 "PM1_R64n,Port MAC 1 Receive 64-Octet Packet Counter Register(etherStatsPkts64OctetsN)" hexmask.quad 0x58 0.--63. 1. "R64n,Incremented for each 64-octet frame received good or bad." line.quad 0x60 "PM1_R127n,Port MAC 1 Receive 65 to 127-Octet Packet Counter Register(etherStatsPkts65to127OctetsN)" hexmask.quad 0x60 0.--63. 1. "R127n,Incremented for each 65- to 127-octet frame received good or bad." line.quad 0x68 "PM1_R255n,Port MAC 1 Receive 128 to 255-Octet Packet Counter Register(etherStatsPkts128to255OctetsN)" hexmask.quad 0x68 0.--63. 1. "R255n,Incremented for each 128- to 255-octet frame received good or bad." line.quad 0x70 "PM1_R511n,Port MAC 1 Receive 256 to 511-Octet Packet Counter Register(etherStatsPkts256to511OctetsN)" hexmask.quad 0x70 0.--63. 1. "R511n,Incremented for each 256- to 511-octet frame received good or bad." line.quad 0x78 "PM1_R1023n,Port MAC 1 Receive 512 to 1023-Octet Packet Counter Register(etherStatsPkts512to1023OctetsN)" hexmask.quad 0x78 0.--63. 1. "R1023n,Incremented for each 512- to 1023-octet frame received good or bad." line.quad 0x80 "PM1_R1522n,Port MAC 1 Receive 1024 to 1522-Octet Packet Counter Register(etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x80 0.--63. 1. "R1522n,Incremented for each 1024- to 1522-octet frame received good or bad." line.quad 0x88 "PM1_R1523Xn,Port MAC 1 Receive 1523 to Max-Octet Packet Counter Register(etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x88 0.--63. 1. "R1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[MAXFRM]) received good or bad" line.quad 0x90 "PM1_ROVRn,Port MAC 1 Receive Oversized Packet Counter Register(etherStatsOversizePktsn)" hexmask.quad 0x90 0.--63. 1. "ROVRn,Incremented for each packet which is larger than the maximum frame length specified in the MAXFRM(FRAME_LENGTH) register (excluding framing bits but including FCS octets) received with a good frame check sequence" line.quad 0x98 "PM1_RJBRn,Port MAC 1 Receive Jabber Packet Counter Register(etherStatsJabbersn)" hexmask.quad 0x98 0.--63. 1. "RJBRn,Incremented for each packet which is larger than the maximum frame length specified in register PMa_MAXFRM[MAXFRM] (excluding framing bits but including FCS octets) received with a bad frame check sequence" line.quad 0xA0 "PM1_RFRGn,Port MAC 1 Receive Fragment Packet Counter Register(etherStatsFragmentsn" hexmask.quad 0xA0 0.--63. 1. "RFRGn,Incremented for each packet which is shorter than 64 bytes and received with a wrong CRC" line.quad 0xA8 "PM1_RCNPn,Port MAC 1 Receive Control Packet Counter Register" hexmask.quad 0xA8 0.--63. 1. "RCNPn,Incremented for each valid control packet (type 0x8808) but not for PAUSE packets" line.quad 0xB0 "PM1_RDRNTPn,Port MAC 1 Receive Dropped Not Truncated Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0xB0 0.--63. 1. "RDRNTPn,Incremented for each fully dropped packet (not truncated) due to internal errors of the MAC client. Occurs when a receive FIFO overflows." rgroup.quad 0x1600++0xF line.quad 0x0 "PM1_TEOCTn,Port MAC 1 Transmit Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "TEOCTn,Incremented for each octet transmitted in both good and bad packets." line.quad 0x8 "PM1_TOCTn,Port MAC 1 Transmit Octets Counter Register(ifOutOctetsn)" hexmask.quad 0x8 0.--63. 1. "TOCTn,Incremented for each octet transmitted except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames transmitted" rgroup.quad 0x1618++0x3F line.quad 0x0 "PM1_TXPFn,Port MAC 1 Transmit Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "TXPFn,Incremented for each valid PAUSE frame transmitted . Note: Pause frames forwarded to the MAC from MAC Client are not counted by TXPFn." line.quad 0x8 "PM1_TFRMn,Port MAC 1 Transmit Frame Counter Register(aFramesTransmittedOKn)" hexmask.quad 0x8 0.--63. 1. "TFRMn,Incremented for each frame transmitted without error including PAUSE frames." line.quad 0x10 "PM1_TFCSn,Port MAC 1 Transmit Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "TFCSn,Incremented for each frame transmitted with a CRC-32 error except for underflows." line.quad 0x18 "PM1_TVLANn,Port MAC 1 Transmit VLAN Frame Counter Register(VLANTransmittedOKn)" hexmask.quad 0x18 0.--63. 1. "TVLANn,Incremented for each valid VLAN tagged frame transmitted with ethertype 0x8100." line.quad 0x20 "PM1_TERRn,Port MAC 1 Transmit Frame Error Counter Register(ifOutErrorsn)" hexmask.quad 0x20 0.--63. 1. "TERRn,Transmit frame error count" line.quad 0x28 "PM1_TUCAn,Port MAC 1 Transmit Unicast Frame Counter Register(ifOutUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "TUCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 0." line.quad 0x30 "PM1_TMCAn,Port MAC 1 Transmit Multicast Frame Counter Register(ifOutMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "TMCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1 )" line.quad 0x38 "PM1_TBCAn,Port MAC 1 Transmit Broadcast Frame Counter Register(ifOutBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "TBCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which all bits of the destination address were 1 ." rgroup.quad 0x1660++0x47 line.quad 0x0 "PM1_TPKTn,Port MAC 1 Transmit Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x0 0.--63. 1. "TPKTn,Incremented for each good or bad packet transmitted." line.quad 0x8 "PM1_TUNDn,Port MAC 1 Transmit Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x8 0.--63. 1. "TUNDn,Incremented for each packet transmitted that was less than 64 octets long with a good CRC." line.quad 0x10 "PM1_T64n,Port MAC 1 Transmit 64-Octet Packet Counter Register (etherStatsPkts64OctetsN)" hexmask.quad 0x10 0.--63. 1. "T64n,Incremented for each 64-octet frame transmitted good or bad." line.quad 0x18 "PM1_T127n,Port MAC 1 Transmit 65 to 127-Octet Packet Counter Register (etherStatsPkts65to127OctetsN)" hexmask.quad 0x18 0.--63. 1. "T127n,Incremented for each 65 to 127-octet frame transmitted good or bad." line.quad 0x20 "PM1_T255n,Port MAC 1 Transmit 128 to 255-Octet Packet Counter Register (etherStatsPkts128to255OctetsN)" hexmask.quad 0x20 0.--63. 1. "T255n,Incremented for each 128 to 255-octet frame transmitted good or bad." line.quad 0x28 "PM1_T511n,Port MAC 1 Transmit 256 to 511-Octet Packet Counter Register (etherStatsPkts256to511OctetsN)" hexmask.quad 0x28 0.--63. 1. "T511n,Incremented for each 256 to 511-octet frame transmitted good or bad." line.quad 0x30 "PM1_T1023n,Port MAC 1 Transmit 512 to 1023-Octet Packet Counter Register (etherStatsPkts512to1023OctetsN)" hexmask.quad 0x30 0.--63. 1. "T1023n,Incremented for each 512 to 1023-octet frame transmitted good or bad." line.quad 0x38 "PM1_T1522n,Port MAC 1 Transmit 1024 to 1522-Octet Packet Counter Register (etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x38 0.--63. 1. "T1522n,Incremented for each 1024- to 1522-octet frame transmitted good or bad." line.quad 0x40 "PM1_T1523Xn,Port MAC 1 Transmit 1523 to TX_MTU-Octet Packet Counter Register (etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x40 0.--63. 1. "T1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[TX_MTU]) transmitted good or bad" rgroup.quad 0x16C0++0x7 line.quad 0x0 "PM1_TCNPn,Port MAC 1 Transmit Control Packet Counter Register" hexmask.quad 0x0 0.--63. 1. "TCNPn,Incremented for each valid control packet transmitted (type 0x8808) but not for PAUSE packets" rgroup.quad 0x16D0++0x27 line.quad 0x0 "PM1_TDFRn,Port MAC 1 Transmit Deferred Packet Counter Register(aFramesWithDeferredXmissions)" hexmask.quad 0x0 0.--63. 1. "TDFRn,Increments for successful transmissions without retransmits that were deferred (half-duplex only)." line.quad 0x8 "PM1_TMCOLn,Port MAC 1 Transmit Multiple Collisions Counter Register(aMultipleCollisionFrames)" hexmask.quad 0x8 0.--63. 1. "TMCOLn,Increments for successful transmission after more than one retransmission (half-duplex only)." line.quad 0x10 "PM1_TSCOLn,Port MAC 1 Transmit Single Collision Counter(aSingleCollisionFrames) Register" hexmask.quad 0x10 0.--63. 1. "TSCOLn,Increments for successful transmission after one retransmission (half-duplex only)." line.quad 0x18 "PM1_TLCOLn,Port MAC 1 Transmit Late Collision Counter(aLateCollisions) Register" hexmask.quad 0x18 0.--63. 1. "TLCOLn,Late collision occurred. Frame corrupted / discarded (half-duplex only)" line.quad 0x20 "PM1_TECOLn,Port MAC 1 Transmit Excessive Collisions Counter Register" hexmask.quad 0x20 0.--63. 1. "TECOLn,Excessive collisions occurred. Frame was discarded (half-duplex only)" group.long 0x1700++0x3 line.long 0x0 "PM1_IF_MODE,Port MAC 1 Interface Mode Control Register" bitfld.long 0x0 15. "ENA,AN Enable" "0: SSP and SFD bits determine the RGMII link speed..,1: RGMII Auto-Negotiation Enabled - PHY in-band.." newline bitfld.long 0x0 13.--14. "SSP,Set Speed" "0: 100 Mbps,1: 10 Mbps,2: 1 Gbps,?" newline bitfld.long 0x0 12. "CLK_STOP,Clock Stop" "0: Not stoppable,1: Stoppable" newline bitfld.long 0x0 6. "HD,Half-duplex" "0: full duplex,1: half duplex" newline bitfld.long 0x0 4. "M10,0 - 100 Mbps RMII 1 - 10 Mbps RMII" "0: 100 Mbps,1: 10 Mbps" newline bitfld.long 0x0 3. "REVMII,Reverse Mode" "0: Reverse mode disabled - port is in MAC mode,1: Reverse mode enabled - port is in PHY mode" newline bitfld.long 0x0 0.--2. "IFMODE,Interface mode" "0,1,2,3,4,5,6,7" rgroup.long 0x1704++0x3 line.long 0x0 "PM1_IF_STATUS,Port MAC 1 Interface Status Register" bitfld.long 0x0 15. "RGLNK,RGMII link" "0,1" newline bitfld.long 0x0 13.--14. "RGSP,RGMII speed setting" "0,1,2,3" newline bitfld.long 0x0 12. "RGFD,RGMII full duplex" "0,1" group.long 0x1800++0x3 line.long 0x0 "MAC_MERGE_MMCSR,Port MAC Merge Control and Status Register" bitfld.long 0x0 31. "LINK_FAIL,Link Fail" "0,1" newline hexmask.long.byte 0x0 23.--29. 1. "VT,Verify Time" newline rbitfld.long 0x0 21.--22. "TXSTS,Merge status" "0,1,2,3" newline rbitfld.long 0x0 18.--20. "VSTS,Verify status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 17. "VDIS,Verify disabled" "0,1" newline bitfld.long 0x0 15.--16. "ME,Merge enabled" "0,1,2,3" newline bitfld.long 0x0 8.--9. "RAFS,Remote additional fragment size" "0,1,2,3" newline bitfld.long 0x0 7. "RPA,Remote preemption active" "0,1" newline bitfld.long 0x0 6. "RPE,Remote preemption enabled" "0,1" newline bitfld.long 0x0 5. "RPS,Remote preemption supported" "0,1" newline rbitfld.long 0x0 3.--4. "LAFS,Local additional fragment size" "0,1,2,3" newline rbitfld.long 0x0 2. "LPA,Local preemption active" "0,1" newline rbitfld.long 0x0 1. "LPE,Local preemption enabled" "0,1" newline rbitfld.long 0x0 0. "LPS,Local preemption supported" "0,1" group.long 0x1808++0x17 line.long 0x0 "MAC_MERGE_MMFAECR,Port MAC Merge Frame Assembly Error Count Register" hexmask.long 0x0 0.--31. 1. "MMFAEC,A count of MAC frames with reassembly errors." line.long 0x4 "MAC_MERGE_MMFSECR,Port MAC Merge Frame SMD Error Count Register" hexmask.long 0x4 0.--31. 1. "MMFSEC,A count of received MAC frames / MAC frame fragments rejected due to unknown SMD value or arriving with an SMD-C when no frame is in progress" line.long 0x8 "MAC_MERGE_MMFAOCR,Port MAC Merge Frame Assembly OK Count Register" hexmask.long 0x8 0.--31. 1. "MMFAOC,A count of MAC frames that were successfully reassembled and delivered to the MAC." line.long 0xC "MAC_MERGE_MMFCRXR,Port MAC Merge Fragment Count RX Register" hexmask.long 0xC 0.--31. 1. "MMFCRX,A count of the number of additional mPackets received due to preemption." line.long 0x10 "MAC_MERGE_MMFCTXR,Port MAC Merge Fragment Count TX Register" hexmask.long 0x10 0.--31. 1. "MMFCTX,A count of the number of additional mPackets transmitted due to preemption." line.long 0x14 "MAC_MERGE_MMHCR,Port MAC Merge Hold Count Register" hexmask.long 0x14 0.--31. 1. "MMHC,A count of the number of times the variable hold transitions from false to true." group.long 0x1C00++0xF line.long 0x0 "PEMDIOCR,Port external MDIO configuration register" rbitfld.long 0x0 31. "BSY1,MDIO busy" "0,1" newline eventfld.long 0x0 30. "CMP,MDIO command completion event. Bit is cleared by writing `1'." "0,1" newline bitfld.long 0x0 29. "CIM,MDIO command completion interrupt enable mask." "0,1" newline eventfld.long 0x0 28. "ADDR_ERR,Address error" "0,1" newline bitfld.long 0x0 23. "NEG,NEG edge select" "0,1" newline bitfld.long 0x0 22. "EHOLD,Extended HOLD select" "0,1" newline rbitfld.long 0x0 16.--18. "WHOAMI,Returns the link ID." "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor." newline bitfld.long 0x0 6. "ENC45,Enable Clause 45 support." "0,1" newline bitfld.long 0x0 5. "PRE_DIS,MDIO preamble disable." "0,1" newline bitfld.long 0x0 2.--4. "MDIO_HOLD,MDIO hold time" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY2,MDIO busy (same as bit 31)" "0,1" line.long 0x4 "PEMDIOICR,Port external MDIO interface control register" rbitfld.long 0x4 31. "BSY,MDIO busy" "0,1" newline bitfld.long 0x4 15. "READ,MDIO read initiation." "0,1" newline bitfld.long 0x4 14. "POST_INC,MDIO read with address post-increment initiation. Self-clearing once transaction is complete." "0,1" newline hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" newline hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" line.long 0x8 "PEMDIOIDR,Port external MDIO interface data register" hexmask.long.word 0x8 0.--15. 1. "MDIO_DATA,16-bit MDIO data." line.long 0xC "PEMDIORAR,Port external MDIO register address register" hexmask.long.word 0xC 0.--15. 1. "REGADDR,MDIO PHY register address." rgroup.long 0x1C10++0x3 line.long 0x0 "PEMDIOSR,Port external MDIO status register" bitfld.long 0x0 19. "REQ_TYPE,Port ID" "0,1" newline bitfld.long 0x0 16.--18. "PORT_ID,Port ID" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 15. "WHT_LIST_ENA,PHY white list enable" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "WHT_LIST,PHY white list" newline bitfld.long 0x0 0. "BSY,Global MDIO busy" "0,1" group.long 0x1C20++0x7 line.long 0x0 "PPSCR,PHY status configuration register" hexmask.long.word 0x0 16.--31. 1. "STATUS_INTERVAL,PHY status read interval" newline rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY,MDIO busy" "0,1" line.long 0x4 "PPSCTRLR,Port PHY status control register" hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" newline hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" rgroup.long 0x1C28++0x3 line.long 0x0 "PPSDR,Port PHY status data register" hexmask.long.word 0x0 16.--31. 1. "CURR_CNT,Current count" newline hexmask.long.word 0x0 0.--15. 1. "MDIO_DATA,16-bit MDIO data" group.long 0x1C2C++0xB line.long 0x0 "PPSRAR,Port PHY status register address register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address. Address of the register within the Clause 45 PHY device from which data is to be read." line.long 0x4 "PPSER,Port PHY status event register" hexmask.long.word 0x4 16.--31. 1. "STATUS_EVENT_LH,Status event low-to-high. Set to 1 if a 0->1 transition on a corresponding data bit has occurred. Write 1 to clear." newline hexmask.long.word 0x4 0.--15. 1. "STATUS_EVENT_HL,Status event high-to-low. Set to 1 if a 1->0 transition on a corresponding data bit has occurred. Write 1 to clear." line.long 0x8 "PPSMR,Port PHY status mask register" hexmask.long.word 0x8 16.--31. 1. "STATUS_MASK_LH,Status mask low-to-high. If set to 1 assert an interrupt if the corresponding event bit is set." newline hexmask.long.word 0x8 0.--15. 1. "STATUS_MASK_HL,Status high-to-low mask. If set to 1 assert an interrupt if the corresponding event bit is set." tree.end tree "ENETC1_PORT" base ad:0x4CC94000 group.long 0x1008++0x3 line.long 0x0 "PM0_COMMAND_CONFIG,Port MAC 0 Command and Configuration Register" bitfld.long 0x0 31. "MG,Magic Packet detection enable." "0,1" newline bitfld.long 0x0 30. "TS_MODE,Transmit timestamp mode" "0,1" newline bitfld.long 0x0 28. "RX_FLUSH,Ingress flush enable" "0,1" newline bitfld.long 0x0 26. "SWR,Software Reset. Self clearing bit." "0,1" newline bitfld.long 0x0 23. "TX_LOWP_ENA,Transmit Low Power Idle Enable." "0: (default) the MAC operates in normal mode.,1: The MAC completes the transmission of the.." newline bitfld.long 0x0 22. "TX_FLUSH,Tx flush" "0,1" newline bitfld.long 0x0 18. "HD_FCEN,Half Duplex Flow Control Enable" "0,1" newline bitfld.long 0x0 15. "TXP,Enable padding of frames in transmit direction (1 default)." "0,1" newline bitfld.long 0x0 14. "TS_PNT,Timestamp Point" "0,1" newline bitfld.long 0x0 13. "CNT_FRM_EN,Control frame reception enable" "0,1" newline bitfld.long 0x0 11.--12. "LPBK_MODE,Loopback mode" "0,1,2,3" newline bitfld.long 0x0 10. "LOOP_ENA,Loopback enable" "0,1" newline bitfld.long 0x0 8. "PAUSE_IGN,Ignore PAUSE frame quanta" "0,1" newline bitfld.long 0x0 7. "PAUSE_FWD,Terminate/forward received PAUSE frames" "0,1" newline bitfld.long 0x0 1. "RX_EN,MAC receive path enable" "0,1" newline bitfld.long 0x0 0. "TX_EN,MAC transmit path enable" "0,1" rgroup.long 0x100C++0x7 line.long 0x0 "PM0_MAC_ADDR_0,Port MAC 0 MAC Address Register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR_0,MAC address 0" line.long 0x4 "PM0_MAC_ADDR_1,Port MAC 0 MAC Address Register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR_1,MAC address 1" group.long 0x1014++0x3 line.long 0x0 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register" hexmask.long.word 0x0 16.--31. 1. "TX_MTU,Maximum transmit frame length" newline hexmask.long.word 0x0 0.--15. 1. "MAXFRM,Maximum supported received frame length." group.long 0x103C++0x7 line.long 0x0 "PM0_MDIO_ADDR,Port MAC 0 Internal MDIO Register Address Register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address." line.long 0x4 "PM0_IEVENT,Port MAC 0 Interrupt Event Register" eventfld.long 0x4 23. "SPD_DUP,Speed/Duplex Change" "0,1" newline eventfld.long 0x4 22. "RX_CSD,Rx Clock Stop Detection" "0,1" newline eventfld.long 0x4 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline eventfld.long 0x4 14. "MGI,Magic packet detection indication event" "0,1" newline eventfld.long 0x4 12. "RX_OVFL,Receive FIFO overflow event." "0,1" newline eventfld.long 0x4 11. "TX_UNFL,Transmit FIFO underflow event." "0,1" newline eventfld.long 0x4 10. "TX_OVFL,Transmit FIFO overflow event." "0,1" newline rbitfld.long 0x4 6. "RX_EMPTY,Receive idle event" "0,1" newline rbitfld.long 0x4 5. "TX_EMPTY,Transmit FIFO empty event" "0,1" newline rbitfld.long 0x4 4. "RX_LOWP,Low Power Idle event" "0,1" group.long 0x104C++0x3 line.long 0x0 "PM0_IMASK,Port MAC 0 Interrupt Mask Register(INT_MASK)" bitfld.long 0x0 23. "SPD_DUP,Speed/Duplex change event mask." "0,1" newline bitfld.long 0x0 22. "RX_CSD,Rx Clock Stop Detection" "0,1" newline bitfld.long 0x0 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline bitfld.long 0x0 14. "MGI,Magic packet detection indication event mask." "0,1" group.long 0x1054++0x3 line.long 0x0 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register" hexmask.long.word 0x0 0.--15. 1. "PQNT,Value to be used for the quanta value when XOFF is triggered." group.long 0x1064++0x3 line.long 0x0 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register" hexmask.long.word 0x0 0.--15. 1. "QTH,Quanta threshold." rgroup.long 0x1074++0x3 line.long 0x0 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register" bitfld.long 0x0 0. "PSTAT,Pause status." "0,1" group.long 0x10B8++0xB line.long 0x0 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register" hexmask.long.tbyte 0x0 0.--23. 1. "TW_SYS_TX,EEE System transmit wait time" line.long 0x4 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register" hexmask.long.tbyte 0x4 0.--23. 1. "SLEEPT,Defines the number of NETC cycles (which represents time) where Tx is idle before mac transmits low power EEE" line.long 0x8 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register" bitfld.long 0x8 31. "EN,IEEE-1588 Single-Step enable." "0,1" newline hexmask.long.word 0x8 7.--15. 1. "OFFSET,Start offset from the beginning of a frame where the field to update is found (index to MS byte)" newline bitfld.long 0x8 6. "CH,Checksum update" "0,1" group.long 0x10D0++0x7 line.long 0x0 "PM0_HD_BACKOFF_ENTROPY,Port MAC 0 half-duplex backoff entropy register" bitfld.long 0x0 31. "SW_ENTROPY_VALID,SW programmable entropy valid" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "HD_BACKOFF_ENTROPY,Half duplex backoff entropy" line.long 0x4 "PM0_HD_FLOW_CTRL,Port MAC 0 Half-Duplex Flow Control Register" hexmask.long.word 0x4 16.--27. 1. "HD_BP_ON_MAX,Half-Duplex Back-Pressure On Maximum" newline hexmask.long.word 0x4 0.--11. 1. "HD_BP_OFF_MIN,Half-Duplex Back-Pressure Off Minimum" group.long 0x10E0++0x3 line.long 0x0 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register" bitfld.long 0x0 3. "WEN,Write enable for Tx/Rx stats registers" "0,1" newline eventfld.long 0x0 2. "CLR,1 - all counters will be reset to 0" "?,1: all counters will be reset to 0" newline bitfld.long 0x0 1. "COD,0 - (default) counters are not affected by read.1 - a read to a counter resets it to 0." "?,1: a read to a counter resets it to 0" newline bitfld.long 0x0 0. "SAT,0 - (default) counters are wrapping around1- the counters saturate at the maximum value" "?,1: the counters saturate at the maximum value" rgroup.quad 0x1100++0xF line.quad 0x0 "PM0_REOCTn,Port MAC 0 Receive Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "REOCTn,Incremented for each octet received in both good and bad packets." line.quad 0x8 "PM0_ROCTn,Port MAC 0 Receive Octets Counter(iflnOctetsn)" hexmask.quad 0x8 0.--63. 1. "ROCTn,Incremented for each octet received except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames received." rgroup.quad 0x1118++0xB7 line.quad 0x0 "PM0_RXPFn,Port MAC 0 Receive Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "RXPFn,Incremented for each valid PAUSE frame received ." line.quad 0x8 "PM0_RFRMn,Port MAC 0 Receive Frame Counter Register(aFramesReceivedOKn)" hexmask.quad 0x8 0.--63. 1. "RFRMn,Incremented for each frame received without error including PAUSE frames." line.quad 0x10 "PM0_RFCSn,Port MAC 0 Receive Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "RFCSn,Incremented for each frame received with a CRC-32 error but the frame is otherwise of correct length." line.quad 0x18 "PM0_RVLANn,Port MAC 0 Receive VLAN Frame Counter Register(VLANReceivedOKn)" hexmask.quad 0x18 0.--63. 1. "RVLANn,Incremented for each valid VLAN tagged frame received with ethertype 0x8100" line.quad 0x20 "PM0_RERRn,Port MAC 0 Receive Frame Error Counter Register(ifInErrorsn)" hexmask.quad 0x20 0.--63. 1. "RERRn,Incremented for each frame received with an error (except for undersized/fragment frame):" line.quad 0x28 "PM0_RUCAn,Port MAC 0 Receive Unicast Frame Counter Register(ifInUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "RUCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 0 ." line.quad 0x30 "PM0_RMCAn,Port MAC 0 Receive Multicast Frame Counter Register(ifInMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "RMCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1)" line.quad 0x38 "PM0_RBCAn,Port MAC 0 Receive Broadcast Frame Counter Register(ifInBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "RBCAn,Incremented for each valid frame received(on the receive FIFO interface) in which all bits of the destination address were 1 ." line.quad 0x40 "PM0_RDRPn,Port MAC 0 Receive Dropped Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0x40 0.--63. 1. "RDRPn,Incremented for each dropped packet due to internal errors of the MAC client" line.quad 0x48 "PM0_RPKTn,Port MAC 0 Receive Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x48 0.--63. 1. "RPKTn,Incremented for each good or bad packet received." line.quad 0x50 "PM0_RUNDn,Port MAC 0 Receive Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x50 0.--63. 1. "RUNDn,Incremented for each packet received that was less than 64 octets and greater than or equal to 18 octets" line.quad 0x58 "PM0_R64n,Port MAC 0 Receive 64-Octet Packet Counter Register(etherStatsPkts64OctetsN)" hexmask.quad 0x58 0.--63. 1. "R64n,Incremented for each 64-octet frame received good or bad." line.quad 0x60 "PM0_R127n,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register(etherStatsPkts65to127OctetsN)" hexmask.quad 0x60 0.--63. 1. "R127n,Incremented for each 65- to 127-octet frame received good or bad." line.quad 0x68 "PM0_R255n,Port MAC 0 Receive 128 to 255-Octet Packet Counter Register(etherStatsPkts128to255OctetsN)" hexmask.quad 0x68 0.--63. 1. "R255n,Incremented for each 128- to 255-octet frame received good or bad." line.quad 0x70 "PM0_R511n,Port MAC 0 Receive 256 to 511-Octet Packet Counter Register(etherStatsPkts256to511OctetsN)" hexmask.quad 0x70 0.--63. 1. "R511n,Incremented for each 256- to 511-octet frame received good or bad." line.quad 0x78 "PM0_R1023n,Port MAC 0 Receive 512 to 1023-Octet Packet Counter Register(etherStatsPkts512to1023OctetsN)" hexmask.quad 0x78 0.--63. 1. "R1023n,Incremented for each 512- to 1023-octet frame received good or bad." line.quad 0x80 "PM0_R1522n,Port MAC 0 Receive 1024 to 1522-Octet Packet Counter Register(etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x80 0.--63. 1. "R1522n,Incremented for each 1024- to 1522-octet frame received good or bad." line.quad 0x88 "PM0_R1523Xn,Port MAC 0 Receive 1523 to Max-Octet Packet Counter Register(etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x88 0.--63. 1. "R1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[MAXFRM]) received good or bad" line.quad 0x90 "PM0_ROVRn,Port MAC 0 Receive Oversized Packet Counter Register(etherStatsOversizePktsn)" hexmask.quad 0x90 0.--63. 1. "ROVRn,Incremented for each packet which is larger than the maximum frame length specified in the MAXFRM(FRAME_LENGTH) register (excluding framing bits but including FCS octets) received with a good frame check sequence" line.quad 0x98 "PM0_RJBRn,Port MAC 0 Receive Jabber Packet Counter Register(etherStatsJabbersn)" hexmask.quad 0x98 0.--63. 1. "RJBRn,Incremented for each packet which is larger than the maximum frame length specified in register PMa_MAXFRM[MAXFRM] (excluding framing bits but including FCS octets) received with a bad frame check sequence" line.quad 0xA0 "PM0_RFRGn,Port MAC 0 Receive Fragment Packet Counter Register(etherStatsFragmentsn" hexmask.quad 0xA0 0.--63. 1. "RFRGn,Incremented for each packet which is shorter than 64 bytes and received with a wrong CRC" line.quad 0xA8 "PM0_RCNPn,Port MAC 0 Receive Control Packet Counter Register" hexmask.quad 0xA8 0.--63. 1. "RCNPn,Incremented for each valid control packet (type 0x8808) but not for PAUSE packets" line.quad 0xB0 "PM0_RDRNTPn,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0xB0 0.--63. 1. "RDRNTPn,Incremented for each fully dropped packet (not truncated) due to internal errors of the MAC client. Occurs when a receive FIFO overflows." rgroup.quad 0x1200++0xF line.quad 0x0 "PM0_TEOCTn,Port MAC 0 Transmit Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "TEOCTn,Incremented for each octet transmitted in both good and bad packets." line.quad 0x8 "PM0_TOCTn,Port MAC 0 Transmit Octets Counter Register(ifOutOctetsn)" hexmask.quad 0x8 0.--63. 1. "TOCTn,Incremented for each octet transmitted except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames transmitted" rgroup.quad 0x1218++0x3F line.quad 0x0 "PM0_TXPFn,Port MAC 0 Transmit Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "TXPFn,Incremented for each valid PAUSE frame transmitted . Note: Pause frames forwarded to the MAC from MAC Client are not counted by TXPFn." line.quad 0x8 "PM0_TFRMn,Port MAC 0 Transmit Frame Counter Register(aFramesTransmittedOKn)" hexmask.quad 0x8 0.--63. 1. "TFRMn,Incremented for each frame transmitted without error including PAUSE frames." line.quad 0x10 "PM0_TFCSn,Port MAC 0 Transmit Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "TFCSn,Incremented for each frame transmitted with a CRC-32 error except for underflows." line.quad 0x18 "PM0_TVLANn,Port MAC 0 Transmit VLAN Frame Counter Register(VLANTransmittedOKn)" hexmask.quad 0x18 0.--63. 1. "TVLANn,Incremented for each valid VLAN tagged frame transmitted with ethertype 0x8100." line.quad 0x20 "PM0_TERRn,Port MAC 0 Transmit Frame Error Counter Register(ifOutErrorsn)" hexmask.quad 0x20 0.--63. 1. "TERRn,Transmit frame error count" line.quad 0x28 "PM0_TUCAn,Port MAC 0 Transmit Unicast Frame Counter Register(ifOutUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "TUCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 0." line.quad 0x30 "PM0_TMCAn,Port MAC 0 Transmit Multicast Frame Counter Register(ifOutMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "TMCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1 )" line.quad 0x38 "PM0_TBCAn,Port MAC 0 Transmit Broadcast Frame Counter Register(ifOutBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "TBCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which all bits of the destination address were 1 ." rgroup.quad 0x1260++0x47 line.quad 0x0 "PM0_TPKTn,Port MAC 0 Transmit Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x0 0.--63. 1. "TPKTn,Incremented for each good or bad packet transmitted." line.quad 0x8 "PM0_TUNDn,Port MAC 0 Transmit Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x8 0.--63. 1. "TUNDn,Incremented for each packet transmitted that was less than 64 octets long with a good CRC." line.quad 0x10 "PM0_T64n,Port MAC 0 Transmit 64-Octet Packet Counter Register (etherStatsPkts64OctetsN)" hexmask.quad 0x10 0.--63. 1. "T64n,Incremented for each 64-octet frame transmitted good or bad." line.quad 0x18 "PM0_T127n,Port MAC 0 Transmit 65 to 127-Octet Packet Counter Register (etherStatsPkts65to127OctetsN)" hexmask.quad 0x18 0.--63. 1. "T127n,Incremented for each 65 to 127-octet frame transmitted good or bad." line.quad 0x20 "PM0_T255n,Port MAC 0 Transmit 128 to 255-Octet Packet Counter Register (etherStatsPkts128to255OctetsN)" hexmask.quad 0x20 0.--63. 1. "T255n,Incremented for each 128 to 255-octet frame transmitted good or bad." line.quad 0x28 "PM0_T511n,Port MAC 0 Transmit 256 to 511-Octet Packet Counter Register (etherStatsPkts256to511OctetsN)" hexmask.quad 0x28 0.--63. 1. "T511n,Incremented for each 256 to 511-octet frame transmitted good or bad." line.quad 0x30 "PM0_T1023n,Port MAC 0 Transmit 512 to 1023-Octet Packet Counter Register (etherStatsPkts512to1023OctetsN)" hexmask.quad 0x30 0.--63. 1. "T1023n,Incremented for each 512 to 1023-octet frame transmitted good or bad." line.quad 0x38 "PM0_T1522n,Port MAC 0 Transmit 1024 to 1522-Octet Packet Counter Register (etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x38 0.--63. 1. "T1522n,Incremented for each 1024- to 1522-octet frame transmitted good or bad." line.quad 0x40 "PM0_T1523Xn,Port MAC 0 Transmit 1523 to TX_MTU-Octet Packet Counter Register (etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x40 0.--63. 1. "T1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[TX_MTU]) transmitted good or bad" rgroup.quad 0x12C0++0x7 line.quad 0x0 "PM0_TCNPn,Port MAC 0 Transmit Control Packet Counter Register" hexmask.quad 0x0 0.--63. 1. "TCNPn,Incremented for each valid control packet transmitted (type 0x8808) but not for PAUSE packets" rgroup.quad 0x12D0++0x27 line.quad 0x0 "PM0_TDFRn,Port MAC 0 Transmit Deferred Packet Counter Register(aFramesWithDeferredXmissions)" hexmask.quad 0x0 0.--63. 1. "TDFRn,Increments for successful transmissions without retransmits that were deferred (half-duplex only)." line.quad 0x8 "PM0_TMCOLn,Port MAC 0 Transmit Multiple Collisions Counter Register(aMultipleCollisionFrames)" hexmask.quad 0x8 0.--63. 1. "TMCOLn,Increments for successful transmission after more than one retransmission (half-duplex only)." line.quad 0x10 "PM0_TSCOLn,Port MAC 0 Transmit Single Collision Counter(aSingleCollisionFrames) Register" hexmask.quad 0x10 0.--63. 1. "TSCOLn,Increments for successful transmission after one retransmission (half-duplex only)." line.quad 0x18 "PM0_TLCOLn,Port MAC 0 Transmit Late Collision Counter(aLateCollisions) Register" hexmask.quad 0x18 0.--63. 1. "TLCOLn,Late collision occurred. Frame corrupted / discarded (half-duplex only)" line.quad 0x20 "PM0_TECOLn,Port MAC 0 Transmit Excessive Collisions Counter Register" hexmask.quad 0x20 0.--63. 1. "TECOLn,Excessive collisions occurred. Frame was discarded (half-duplex only)" group.long 0x1300++0x3 line.long 0x0 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register" bitfld.long 0x0 15. "ENA,AN Enable" "0: SSP and SFD bits determine the RGMII link speed..,1: RGMII Auto-Negotiation Enabled - PHY in-band.." newline bitfld.long 0x0 13.--14. "SSP,Set Speed" "0: 100 Mbps,1: 10 Mbps,2: 1 Gbps,?" newline bitfld.long 0x0 12. "CLK_STOP,Clock Stop" "0: Not stoppable,1: Stoppable" newline bitfld.long 0x0 6. "HD,Half-duplex" "0: full duplex,1: half duplex" newline bitfld.long 0x0 4. "M10,0 - 100 Mbps RMII 1 - 10 Mbps RMII" "0: 100 Mbps,1: 10 Mbps" newline bitfld.long 0x0 3. "REVMII,Reverse Mode" "0: Reverse mode disabled - port is in MAC mode,1: Reverse mode enabled - port is in PHY mode" newline bitfld.long 0x0 0.--2. "IFMODE,Interface mode" "0,1,2,3,4,5,6,7" rgroup.long 0x1304++0x3 line.long 0x0 "PM0_IF_STATUS,Port MAC 0 Interface Status Register" bitfld.long 0x0 15. "RGLNK,RGMII link" "0,1" newline bitfld.long 0x0 13.--14. "RGSP,RGMII speed setting" "0,1,2,3" newline bitfld.long 0x0 12. "RGFD,RGMII full duplex" "0,1" group.long 0x1C00++0xF line.long 0x0 "PEMDIOCR,Port external MDIO configuration register" rbitfld.long 0x0 31. "BSY1,MDIO busy" "0,1" newline eventfld.long 0x0 30. "CMP,MDIO command completion event. Bit is cleared by writing `1'." "0,1" newline bitfld.long 0x0 29. "CIM,MDIO command completion interrupt enable mask." "0,1" newline eventfld.long 0x0 28. "ADDR_ERR,Address error" "0,1" newline bitfld.long 0x0 23. "NEG,NEG edge select" "0,1" newline bitfld.long 0x0 22. "EHOLD,Extended HOLD select" "0,1" newline rbitfld.long 0x0 16.--18. "WHOAMI,Returns the link ID." "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor." newline bitfld.long 0x0 6. "ENC45,Enable Clause 45 support." "0,1" newline bitfld.long 0x0 5. "PRE_DIS,MDIO preamble disable." "0,1" newline bitfld.long 0x0 2.--4. "MDIO_HOLD,MDIO hold time" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY2,MDIO busy (same as bit 31)" "0,1" line.long 0x4 "PEMDIOICR,Port external MDIO interface control register" rbitfld.long 0x4 31. "BSY,MDIO busy" "0,1" newline bitfld.long 0x4 15. "READ,MDIO read initiation." "0,1" newline bitfld.long 0x4 14. "POST_INC,MDIO read with address post-increment initiation. Self-clearing once transaction is complete." "0,1" newline hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" newline hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" line.long 0x8 "PEMDIOIDR,Port external MDIO interface data register" hexmask.long.word 0x8 0.--15. 1. "MDIO_DATA,16-bit MDIO data." line.long 0xC "PEMDIORAR,Port external MDIO register address register" hexmask.long.word 0xC 0.--15. 1. "REGADDR,MDIO PHY register address." rgroup.long 0x1C10++0x3 line.long 0x0 "PEMDIOSR,Port external MDIO status register" bitfld.long 0x0 19. "REQ_TYPE,Port ID" "0,1" newline bitfld.long 0x0 16.--18. "PORT_ID,Port ID" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 15. "WHT_LIST_ENA,PHY white list enable" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "WHT_LIST,PHY white list" newline bitfld.long 0x0 0. "BSY,Global MDIO busy" "0,1" group.long 0x1C20++0x7 line.long 0x0 "PPSCR,PHY status configuration register" hexmask.long.word 0x0 16.--31. 1. "STATUS_INTERVAL,PHY status read interval" newline rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY,MDIO busy" "0,1" line.long 0x4 "PPSCTRLR,Port PHY status control register" hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" newline hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" rgroup.long 0x1C28++0x3 line.long 0x0 "PPSDR,Port PHY status data register" hexmask.long.word 0x0 16.--31. 1. "CURR_CNT,Current count" newline hexmask.long.word 0x0 0.--15. 1. "MDIO_DATA,16-bit MDIO data" group.long 0x1C2C++0xB line.long 0x0 "PPSRAR,Port PHY status register address register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address. Address of the register within the Clause 45 PHY device from which data is to be read." line.long 0x4 "PPSER,Port PHY status event register" hexmask.long.word 0x4 16.--31. 1. "STATUS_EVENT_LH,Status event low-to-high. Set to 1 if a 0->1 transition on a corresponding data bit has occurred. Write 1 to clear." newline hexmask.long.word 0x4 0.--15. 1. "STATUS_EVENT_HL,Status event high-to-low. Set to 1 if a 1->0 transition on a corresponding data bit has occurred. Write 1 to clear." line.long 0x8 "PPSMR,Port PHY status mask register" hexmask.long.word 0x8 16.--31. 1. "STATUS_MASK_LH,Status mask low-to-high. If set to 1 assert an interrupt if the corresponding event bit is set." newline hexmask.long.word 0x8 0.--15. 1. "STATUS_MASK_HL,Status high-to-low mask. If set to 1 assert an interrupt if the corresponding event bit is set." tree.end tree "ENETC2_PORT" base ad:0x4CD14000 group.long 0x1008++0x3 line.long 0x0 "PM0_COMMAND_CONFIG,Port MAC 0 Command and Configuration Register" bitfld.long 0x0 31. "MG,Magic Packet detection enable." "0,1" bitfld.long 0x0 30. "TS_MODE,Transmit timestamp mode" "0,1" newline bitfld.long 0x0 28. "RX_FLUSH,Ingress flush enable" "0,1" bitfld.long 0x0 26. "SWR,Software Reset. Self clearing bit." "0,1" newline bitfld.long 0x0 24. "REG_LOWP_RXETY,Rx low power empty indicator" "0,1" bitfld.long 0x0 23. "TX_LOWP_ENA,Transmit Low Power Idle Enable." "0: (default) the MAC operates in normal mode.,1: The MAC completes the transmission of the.." newline bitfld.long 0x0 22. "TX_FLUSH,Tx flush" "0,1" bitfld.long 0x0 21. "SFD,Disable check of SFD (0xd5) character at frame start." "0,1" newline bitfld.long 0x0 18. "HD_FCEN,Half Duplex Flow Control Enable" "0,1" bitfld.long 0x0 16. "SEND_IDLE,Force send idle" "0,1" newline bitfld.long 0x0 15. "TXP,Enable padding of frames in transmit direction (1 default)." "0,1" bitfld.long 0x0 14. "TS_PNT,Timestamp Point" "0,1" newline bitfld.long 0x0 13. "CNT_FRM_EN,Control frame reception enable" "0,1" bitfld.long 0x0 11.--12. "LPBK_MODE,Loopback mode" "0,1,2,3" newline bitfld.long 0x0 10. "LOOP_ENA,Loopback enable" "0,1" bitfld.long 0x0 8. "PAUSE_IGN,Ignore PAUSE frame quanta" "0,1" newline bitfld.long 0x0 7. "PAUSE_FWD,Terminate/forward received PAUSE frames" "0,1" bitfld.long 0x0 1. "RX_EN,MAC receive path enable" "0,1" newline bitfld.long 0x0 0. "TX_EN,MAC transmit path enable" "0,1" rgroup.long 0x100C++0x7 line.long 0x0 "PM0_MAC_ADDR_0,Port MAC 0 MAC Address Register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR_0,MAC address 0" line.long 0x4 "PM0_MAC_ADDR_1,Port MAC 0 MAC Address Register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR_1,MAC address 1" group.long 0x1014++0x3 line.long 0x0 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register" hexmask.long.word 0x0 16.--31. 1. "TX_MTU,Maximum transmit frame length" hexmask.long.word 0x0 0.--15. 1. "MAXFRM,Maximum supported received frame length." group.long 0x103C++0x7 line.long 0x0 "PM0_MDIO_ADDR,Port MAC 0 Internal MDIO Register Address Register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address." line.long 0x4 "PM0_IEVENT,Port MAC 0 Interrupt Event Register" eventfld.long 0x4 26. "AN_DONE,Auto-Negotiation Done" "0,1" eventfld.long 0x4 25. "LINK_DOWN,Link Down" "0,1" newline eventfld.long 0x4 24. "LINK_UP,Link Up" "0,1" eventfld.long 0x4 23. "SPD_DUP,Speed/Duplex Change" "0,1" newline eventfld.long 0x4 22. "RX_CSD,Rx Clock Stop Detection" "0,1" eventfld.long 0x4 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline eventfld.long 0x4 14. "MGI,Magic packet detection indication event" "0,1" eventfld.long 0x4 12. "RX_OVFL,Receive FIFO overflow event." "0,1" newline eventfld.long 0x4 11. "TX_UNFL,Transmit FIFO underflow event." "0,1" eventfld.long 0x4 10. "TX_OVFL,Transmit FIFO overflow event." "0,1" newline eventfld.long 0x4 7. "LI_FAULT,Link Interruption fault event (XGMII)" "0,1" rbitfld.long 0x4 6. "RX_EMPTY,Receive idle event" "0,1" newline rbitfld.long 0x4 5. "TX_EMPTY,Transmit FIFO empty event" "0,1" rbitfld.long 0x4 4. "RX_LOWP,Low Power Idle event" "0,1" newline eventfld.long 0x4 1. "REM_FAULT,Remote fault event (XGMII)" "0,1" eventfld.long 0x4 0. "LOC_FAULT,Local fault event (XGMII)" "0,1" group.long 0x104C++0x3 line.long 0x0 "PM0_IMASK,Port MAC 0 Interrupt Mask Register(INT_MASK)" bitfld.long 0x0 26. "AN_DONE,Auto-Negotiation Done" "0,1" bitfld.long 0x0 25. "LINK_DOWN,Link Down" "0,1" newline bitfld.long 0x0 24. "LINK_UP,Link Up" "0,1" bitfld.long 0x0 23. "SPD_DUP,Speed/Duplex change event mask." "0,1" newline bitfld.long 0x0 22. "RX_CSD,Rx Clock Stop Detection" "0,1" bitfld.long 0x0 21. "TX_CSD,Tx Clock Stop Detection" "0,1" newline bitfld.long 0x0 14. "MGI,Magic packet detection indication event mask." "0,1" bitfld.long 0x0 7. "LI_FAULT,Link Interruption fault (XGMII) event mask" "0,1" newline bitfld.long 0x0 1. "REM_FAULT,Remote fault event (XGMII) mask" "0,1" bitfld.long 0x0 0. "LOC_FAULT,Local fault event (XGMII) mask" "0,1" group.long 0x1054++0x3 line.long 0x0 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register" hexmask.long.word 0x0 0.--15. 1. "PQNT,Value to be used for the quanta value when XOFF is triggered." group.long 0x1064++0x3 line.long 0x0 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register" hexmask.long.word 0x0 0.--15. 1. "QTH,Quanta threshold." rgroup.long 0x1074++0x3 line.long 0x0 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register" bitfld.long 0x0 0. "PSTAT,Pause status." "0,1" group.long 0x10B8++0xB line.long 0x0 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register" hexmask.long.tbyte 0x0 0.--23. 1. "TW_SYS_TX,EEE System transmit wait time" line.long 0x4 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register" hexmask.long.tbyte 0x4 0.--23. 1. "SLEEPT,Defines the number of NETC cycles (which represents time) where Tx is idle before mac transmits low power EEE" line.long 0x8 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register" bitfld.long 0x8 31. "EN,IEEE-1588 Single-Step enable." "0,1" hexmask.long.word 0x8 7.--15. 1. "OFFSET,Start offset from the beginning of a frame where the field to update is found (index to MS byte)" newline bitfld.long 0x8 6. "CH,Checksum update" "0,1" group.long 0x10D0++0x7 line.long 0x0 "PM0_HD_BACKOFF_ENTROPY,Port MAC 0 half-duplex backoff entropy register" bitfld.long 0x0 31. "SW_ENTROPY_VALID,SW programmable entropy valid" "0,1" hexmask.long.word 0x0 0.--9. 1. "HD_BACKOFF_ENTROPY,Half duplex backoff entropy" line.long 0x4 "PM0_HD_FLOW_CTRL,Port MAC 0 Half-Duplex Flow Control Register" hexmask.long.word 0x4 16.--27. 1. "HD_BP_ON_MAX,Half-Duplex Back-Pressure On Maximum" hexmask.long.word 0x4 0.--11. 1. "HD_BP_OFF_MIN,Half-Duplex Back-Pressure Off Minimum" group.long 0x10E0++0x3 line.long 0x0 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register" bitfld.long 0x0 3. "WEN,Write enable for Tx/Rx stats registers" "0,1" eventfld.long 0x0 2. "CLR,1 - all counters will be reset to 0" "?,1: all counters will be reset to 0" newline bitfld.long 0x0 1. "COD,0 - (default) counters are not affected by read.1 - a read to a counter resets it to 0." "?,1: a read to a counter resets it to 0" bitfld.long 0x0 0. "SAT,0 - (default) counters are wrapping around1- the counters saturate at the maximum value" "?,1: the counters saturate at the maximum value" rgroup.quad 0x1100++0xF line.quad 0x0 "PM0_REOCTn,Port MAC 0 Receive Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "REOCTn,Incremented for each octet received in both good and bad packets." line.quad 0x8 "PM0_ROCTn,Port MAC 0 Receive Octets Counter(iflnOctetsn)" hexmask.quad 0x8 0.--63. 1. "ROCTn,Incremented for each octet received except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames received." rgroup.quad 0x1118++0xB7 line.quad 0x0 "PM0_RXPFn,Port MAC 0 Receive Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "RXPFn,Incremented for each valid PAUSE frame received ." line.quad 0x8 "PM0_RFRMn,Port MAC 0 Receive Frame Counter Register(aFramesReceivedOKn)" hexmask.quad 0x8 0.--63. 1. "RFRMn,Incremented for each frame received without error including PAUSE frames." line.quad 0x10 "PM0_RFCSn,Port MAC 0 Receive Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "RFCSn,Incremented for each frame received with a CRC-32 error but the frame is otherwise of correct length." line.quad 0x18 "PM0_RVLANn,Port MAC 0 Receive VLAN Frame Counter Register(VLANReceivedOKn)" hexmask.quad 0x18 0.--63. 1. "RVLANn,Incremented for each valid VLAN tagged frame received with ethertype 0x8100" line.quad 0x20 "PM0_RERRn,Port MAC 0 Receive Frame Error Counter Register(ifInErrorsn)" hexmask.quad 0x20 0.--63. 1. "RERRn,Incremented for each frame received with an error (except for undersized/fragment frame):" line.quad 0x28 "PM0_RUCAn,Port MAC 0 Receive Unicast Frame Counter Register(ifInUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "RUCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 0 ." line.quad 0x30 "PM0_RMCAn,Port MAC 0 Receive Multicast Frame Counter Register(ifInMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "RMCAn,Incremented for each valid frame received(on the receive FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1)" line.quad 0x38 "PM0_RBCAn,Port MAC 0 Receive Broadcast Frame Counter Register(ifInBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "RBCAn,Incremented for each valid frame received(on the receive FIFO interface) in which all bits of the destination address were 1 ." line.quad 0x40 "PM0_RDRPn,Port MAC 0 Receive Dropped Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0x40 0.--63. 1. "RDRPn,Incremented for each dropped packet due to internal errors of the MAC client" line.quad 0x48 "PM0_RPKTn,Port MAC 0 Receive Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x48 0.--63. 1. "RPKTn,Incremented for each good or bad packet received." line.quad 0x50 "PM0_RUNDn,Port MAC 0 Receive Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x50 0.--63. 1. "RUNDn,Incremented for each packet received that was less than 64 octets and greater than or equal to 18 octets" line.quad 0x58 "PM0_R64n,Port MAC 0 Receive 64-Octet Packet Counter Register(etherStatsPkts64OctetsN)" hexmask.quad 0x58 0.--63. 1. "R64n,Incremented for each 64-octet frame received good or bad." line.quad 0x60 "PM0_R127n,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register(etherStatsPkts65to127OctetsN)" hexmask.quad 0x60 0.--63. 1. "R127n,Incremented for each 65- to 127-octet frame received good or bad." line.quad 0x68 "PM0_R255n,Port MAC 0 Receive 128 to 255-Octet Packet Counter Register(etherStatsPkts128to255OctetsN)" hexmask.quad 0x68 0.--63. 1. "R255n,Incremented for each 128- to 255-octet frame received good or bad." line.quad 0x70 "PM0_R511n,Port MAC 0 Receive 256 to 511-Octet Packet Counter Register(etherStatsPkts256to511OctetsN)" hexmask.quad 0x70 0.--63. 1. "R511n,Incremented for each 256- to 511-octet frame received good or bad." line.quad 0x78 "PM0_R1023n,Port MAC 0 Receive 512 to 1023-Octet Packet Counter Register(etherStatsPkts512to1023OctetsN)" hexmask.quad 0x78 0.--63. 1. "R1023n,Incremented for each 512- to 1023-octet frame received good or bad." line.quad 0x80 "PM0_R1522n,Port MAC 0 Receive 1024 to 1522-Octet Packet Counter Register(etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x80 0.--63. 1. "R1522n,Incremented for each 1024- to 1522-octet frame received good or bad." line.quad 0x88 "PM0_R1523Xn,Port MAC 0 Receive 1523 to Max-Octet Packet Counter Register(etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x88 0.--63. 1. "R1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[MAXFRM]) received good or bad" line.quad 0x90 "PM0_ROVRn,Port MAC 0 Receive Oversized Packet Counter Register(etherStatsOversizePktsn)" hexmask.quad 0x90 0.--63. 1. "ROVRn,Incremented for each packet which is larger than the maximum frame length specified in the MAXFRM(FRAME_LENGTH) register (excluding framing bits but including FCS octets) received with a good frame check sequence" line.quad 0x98 "PM0_RJBRn,Port MAC 0 Receive Jabber Packet Counter Register(etherStatsJabbersn)" hexmask.quad 0x98 0.--63. 1. "RJBRn,Incremented for each packet which is larger than the maximum frame length specified in register PMa_MAXFRM[MAXFRM] (excluding framing bits but including FCS octets) received with a bad frame check sequence" line.quad 0xA0 "PM0_RFRGn,Port MAC 0 Receive Fragment Packet Counter Register(etherStatsFragmentsn" hexmask.quad 0xA0 0.--63. 1. "RFRGn,Incremented for each packet which is shorter than 64 bytes and received with a wrong CRC" line.quad 0xA8 "PM0_RCNPn,Port MAC 0 Receive Control Packet Counter Register" hexmask.quad 0xA8 0.--63. 1. "RCNPn,Incremented for each valid control packet (type 0x8808) but not for PAUSE packets" line.quad 0xB0 "PM0_RDRNTPn,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register(etherStatsDropEventsn)" hexmask.quad 0xB0 0.--63. 1. "RDRNTPn,Incremented for each fully dropped packet (not truncated) due to internal errors of the MAC client. Occurs when a receive FIFO overflows." rgroup.quad 0x1200++0xF line.quad 0x0 "PM0_TEOCTn,Port MAC 0 Transmit Ethernet Octets Counter(etherStatsOctetsn)" hexmask.quad 0x0 0.--63. 1. "TEOCTn,Incremented for each octet transmitted in both good and bad packets." line.quad 0x8 "PM0_TOCTn,Port MAC 0 Transmit Octets Counter Register(ifOutOctetsn)" hexmask.quad 0x8 0.--63. 1. "TOCTn,Incremented for each octet transmitted except preamble (that is Header Payload Pad and FCS) for all valid frames and valid PAUSE frames transmitted" rgroup.quad 0x1218++0x3F line.quad 0x0 "PM0_TXPFn,Port MAC 0 Transmit Valid Pause Frame Counter Register(aPAUSEMACCtrlFramesReceivedn)" hexmask.quad 0x0 0.--63. 1. "TXPFn,Incremented for each valid PAUSE frame transmitted . Note: Pause frames forwarded to the MAC from MAC Client are not counted by TXPFn." line.quad 0x8 "PM0_TFRMn,Port MAC 0 Transmit Frame Counter Register(aFramesTransmittedOKn)" hexmask.quad 0x8 0.--63. 1. "TFRMn,Incremented for each frame transmitted without error including PAUSE frames." line.quad 0x10 "PM0_TFCSn,Port MAC 0 Transmit Frame Check Sequence Error Counter Register()" hexmask.quad 0x10 0.--63. 1. "TFCSn,Incremented for each frame transmitted with a CRC-32 error except for underflows." line.quad 0x18 "PM0_TVLANn,Port MAC 0 Transmit VLAN Frame Counter Register(VLANTransmittedOKn)" hexmask.quad 0x18 0.--63. 1. "TVLANn,Incremented for each valid VLAN tagged frame transmitted with ethertype 0x8100." line.quad 0x20 "PM0_TERRn,Port MAC 0 Transmit Frame Error Counter Register(ifOutErrorsn)" hexmask.quad 0x20 0.--63. 1. "TERRn,Transmit frame error count" line.quad 0x28 "PM0_TUCAn,Port MAC 0 Transmit Unicast Frame Counter Register(ifOutUcastPktsn)" hexmask.quad 0x28 0.--63. 1. "TUCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 0." line.quad 0x30 "PM0_TMCAn,Port MAC 0 Transmit Multicast Frame Counter Register(ifOutMulticastPktsn)" hexmask.quad 0x30 0.--63. 1. "TMCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which bit 0 of the destination address was 1 but not the broadcast address (all bits set to 1 )" line.quad 0x38 "PM0_TBCAn,Port MAC 0 Transmit Broadcast Frame Counter Register(ifOutBroadcastPktsn)" hexmask.quad 0x38 0.--63. 1. "TBCAn,Incremented for each valid frame transmitted(to the FIFO interface) in which all bits of the destination address were 1 ." rgroup.quad 0x1260++0x47 line.quad 0x0 "PM0_TPKTn,Port MAC 0 Transmit Packets Counter Register(etherStatsPktsn)" hexmask.quad 0x0 0.--63. 1. "TPKTn,Incremented for each good or bad packet transmitted." line.quad 0x8 "PM0_TUNDn,Port MAC 0 Transmit Undersized Packet Counter Register(etherStatsUndersizePktsn)" hexmask.quad 0x8 0.--63. 1. "TUNDn,Incremented for each packet transmitted that was less than 64 octets long with a good CRC." line.quad 0x10 "PM0_T64n,Port MAC 0 Transmit 64-Octet Packet Counter Register (etherStatsPkts64OctetsN)" hexmask.quad 0x10 0.--63. 1. "T64n,Incremented for each 64-octet frame transmitted good or bad." line.quad 0x18 "PM0_T127n,Port MAC 0 Transmit 65 to 127-Octet Packet Counter Register (etherStatsPkts65to127OctetsN)" hexmask.quad 0x18 0.--63. 1. "T127n,Incremented for each 65 to 127-octet frame transmitted good or bad." line.quad 0x20 "PM0_T255n,Port MAC 0 Transmit 128 to 255-Octet Packet Counter Register (etherStatsPkts128to255OctetsN)" hexmask.quad 0x20 0.--63. 1. "T255n,Incremented for each 128 to 255-octet frame transmitted good or bad." line.quad 0x28 "PM0_T511n,Port MAC 0 Transmit 256 to 511-Octet Packet Counter Register (etherStatsPkts256to511OctetsN)" hexmask.quad 0x28 0.--63. 1. "T511n,Incremented for each 256 to 511-octet frame transmitted good or bad." line.quad 0x30 "PM0_T1023n,Port MAC 0 Transmit 512 to 1023-Octet Packet Counter Register (etherStatsPkts512to1023OctetsN)" hexmask.quad 0x30 0.--63. 1. "T1023n,Incremented for each 512 to 1023-octet frame transmitted good or bad." line.quad 0x38 "PM0_T1522n,Port MAC 0 Transmit 1024 to 1522-Octet Packet Counter Register (etherStatsPkts1024to1522OctetsN)" hexmask.quad 0x38 0.--63. 1. "T1522n,Incremented for each 1024- to 1522-octet frame transmitted good or bad." line.quad 0x40 "PM0_T1523Xn,Port MAC 0 Transmit 1523 to TX_MTU-Octet Packet Counter Register (etherStatsPkts1523toMaxOctetsN)" hexmask.quad 0x40 0.--63. 1. "T1523Xn,Incremented for each 1523-octet frame and larger (up to the maximum frame length specified in register PMa_MAXFRM[TX_MTU]) transmitted good or bad" rgroup.quad 0x12C0++0x7 line.quad 0x0 "PM0_TCNPn,Port MAC 0 Transmit Control Packet Counter Register" hexmask.quad 0x0 0.--63. 1. "TCNPn,Incremented for each valid control packet transmitted (type 0x8808) but not for PAUSE packets" group.long 0x1300++0x3 line.long 0x0 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register" bitfld.long 0x0 3. "REVMII,Reverse Mode" "0: Reverse mode disabled - port is in MAC mode,1: Reverse mode enabled - port is in PHY mode" bitfld.long 0x0 0.--2. "IFMODE,Interface mode" "0,1,2,3,4,5,6,7" rgroup.long 0x1304++0x3 line.long 0x0 "PM0_IF_STATUS,Port MAC 0 Interface Status Register" bitfld.long 0x0 15. "RGLNK,RGMII link" "0,1" bitfld.long 0x0 13.--14. "RGSP,RGMII speed setting" "0,1,2,3" newline bitfld.long 0x0 12. "RGFD,RGMII full duplex" "0,1" group.long 0x1C00++0xF line.long 0x0 "PEMDIOCR,Port external MDIO configuration register" rbitfld.long 0x0 31. "BSY1,MDIO busy" "0,1" eventfld.long 0x0 30. "CMP,MDIO command completion event. Bit is cleared by writing `1'." "0,1" newline bitfld.long 0x0 29. "CIM,MDIO command completion interrupt enable mask." "0,1" eventfld.long 0x0 28. "ADDR_ERR,Address error" "0,1" newline bitfld.long 0x0 23. "NEG,NEG edge select" "0,1" bitfld.long 0x0 22. "EHOLD,Extended HOLD select" "0,1" newline rbitfld.long 0x0 16.--18. "WHOAMI,Returns the link ID." "0,1,2,3,4,5,6,7" hexmask.long.word 0x0 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor." newline bitfld.long 0x0 6. "ENC45,Enable Clause 45 support." "0,1" bitfld.long 0x0 5. "PRE_DIS,MDIO preamble disable." "0,1" newline bitfld.long 0x0 2.--4. "MDIO_HOLD,MDIO hold time" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY2,MDIO busy (same as bit 31)" "0,1" line.long 0x4 "PEMDIOICR,Port external MDIO interface control register" rbitfld.long 0x4 31. "BSY,MDIO busy" "0,1" bitfld.long 0x4 15. "READ,MDIO read initiation." "0,1" newline bitfld.long 0x4 14. "POST_INC,MDIO read with address post-increment initiation. Self-clearing once transaction is complete." "0,1" hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" newline hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" line.long 0x8 "PEMDIOIDR,Port external MDIO interface data register" hexmask.long.word 0x8 0.--15. 1. "MDIO_DATA,16-bit MDIO data." line.long 0xC "PEMDIORAR,Port external MDIO register address register" hexmask.long.word 0xC 0.--15. 1. "REGADDR,MDIO PHY register address." rgroup.long 0x1C10++0x3 line.long 0x0 "PEMDIOSR,Port external MDIO status register" bitfld.long 0x0 19. "REQ_TYPE,Port ID" "0,1" bitfld.long 0x0 16.--18. "PORT_ID,Port ID" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 15. "WHT_LIST_ENA,PHY white list enable" "0,1" hexmask.long.byte 0x0 8.--12. 1. "WHT_LIST,PHY white list" newline bitfld.long 0x0 0. "BSY,Global MDIO busy" "0,1" group.long 0x1C20++0x7 line.long 0x0 "PPSCR,PHY status configuration register" hexmask.long.word 0x0 16.--31. 1. "STATUS_INTERVAL,PHY status read interval" rbitfld.long 0x0 1. "MDIO_RD_ER,MDIO read error" "0,1" newline rbitfld.long 0x0 0. "BSY,MDIO busy" "0,1" line.long 0x4 "PPSCTRLR,Port PHY status control register" hexmask.long.byte 0x4 5.--9. 1. "PORT_ADDR,5-bit MDIO port address (Clause 45) / PHY address (Clause 22)" hexmask.long.byte 0x4 0.--4. 1. "DEV_ADDR,5-bit MDIO device address (Clause 45) / register address (Clause 22)" rgroup.long 0x1C28++0x3 line.long 0x0 "PPSDR,Port PHY status data register" hexmask.long.word 0x0 16.--31. 1. "CURR_CNT,Current count" hexmask.long.word 0x0 0.--15. 1. "MDIO_DATA,16-bit MDIO data" group.long 0x1C2C++0xB line.long 0x0 "PPSRAR,Port PHY status register address register" hexmask.long.word 0x0 0.--15. 1. "REGADDR,MDIO PHY register address. Address of the register within the Clause 45 PHY device from which data is to be read." line.long 0x4 "PPSER,Port PHY status event register" hexmask.long.word 0x4 16.--31. 1. "STATUS_EVENT_LH,Status event low-to-high. Set to 1 if a 0->1 transition on a corresponding data bit has occurred. Write 1 to clear." hexmask.long.word 0x4 0.--15. 1. "STATUS_EVENT_HL,Status event high-to-low. Set to 1 if a 1->0 transition on a corresponding data bit has occurred. Write 1 to clear." line.long 0x8 "PPSMR,Port PHY status mask register" hexmask.long.word 0x8 16.--31. 1. "STATUS_MASK_LH,Status mask low-to-high. If set to 1 assert an interrupt if the corresponding event bit is set." hexmask.long.word 0x8 0.--15. 1. "STATUS_MASK_HL,Status high-to-low mask. If set to 1 assert an interrupt if the corresponding event bit is set." tree.end tree.end tree "NETC_GLOBAL" tree "EMDIO_GLOBAL" base ad:0x4CDD0000 rgroup.long 0x4++0x7 line.long 0x0 "SMDTR,Shared memory depletion threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Shared memory depletion threshold in Words" line.long 0x4 "SMACR,Shared memory available count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of available shared memory in words" rgroup.long 0x10++0x17 line.long 0x0 "SMCLWMR,Shared memory count low watermark register" hexmask.long.tbyte 0x0 0.--23. 1. "WATERMARK,Shows the low watermark for shared memory in words since the last read of this register" line.long 0x4 "SMBUCR,Shared memory buffer unassigned count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of unassigned Shared memory buffer in words" line.long 0x8 "SMBUCHWMR,Shared memory buffer unassigned count high watermark register" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,Shows the high watermark for unassigned memory since the last read of this register in words" line.long 0xC "SMLCR,Shared memory loss count register" bitfld.long 0xC 31. "IFDC,Indeterminate frame descriptor corruption Number of words lost due to frame's key meta data (reference count or number of IMUs) corruption" "0,1" bitfld.long 0xC 30. "IFLC,Indeterminate free list corruption Number of words lost due to free list corruption" "0,1" hexmask.long.tbyte 0xC 0.--23. 1. "COUNT,Determinate number of lost words" line.long 0x10 "HBTCAPR,Hash bucket table capability register" hexmask.long.byte 0x10 28.--31. 1. "MAX_VISITS,Specifies the maximum number of hash entries visited during a table management search command" bitfld.long 0x10 24.--26. "MAX_COL,Specifies the maximum exact match hash collisions chain allowed" "0,1,2,3,4,5,6,7" hexmask.long.word 0x10 0.--15. 1. "NUM_ENTRIES,Specifies the total number of allocate bucket entries for use." line.long 0x14 "HBTOR0,Hash bucket table operational register 0" hexmask.long.word 0x14 16.--31. 1. "HWM_ENTRIES,Specifies the high watermark of used buckets Register is reset to NUM_ENTRIES after read." hexmask.long.word 0x14 0.--15. 1. "NUM_ENTRIES,Specifies the amount of entries used" rgroup.long 0x2C++0x3 line.long 0x0 "HBTOR2,Hash bucket table operational register 2" hexmask.long.byte 0x0 16.--19. 1. "HWM_COL,Length of the longest hash collision chain noticed since the last read. Range: 0..8" hexmask.long.byte 0x0 8.--15. 1. "RUN_AVG_INT,The integer portion of the running average length of hash lookup" hexmask.long.byte 0x0 0.--7. 1. "RUN_AVG_FRACT,The fractional portion of the running average length of hash lookup" rgroup.long 0x40++0xB line.long 0x0 "SMERBCAPR,Shared memory ENETC receive buffer capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 Bytes 1-3: reserved" "?,?,?,3: reserved" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Threshold in words of receive buffer memory used by all ENETC functions" line.long 0x4 "SMERBOR0,Shared memory ENETC receive buffer operational register 0" hexmask.long.tbyte 0x4 0.--23. 1. "AMOUNT,Number of words in use for buffers and frame descriptors." line.long 0x8 "SMERBOR1,Shared memory ENETC receive buffer operational 1" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,High watermark of words in use by buffers and frame descriptors since the last read" rgroup.long 0x100++0x7 line.long 0x0 "PCE0OR,PCE 0 operational register" hexmask.long.byte 0x0 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the PCE block" hexmask.long.byte 0x0 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x0 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Parse Classifier Engine." line.long 0x4 "RFE0OR,Replication Forwarding Engine 0 operational register" hexmask.long.byte 0x4 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the RFE block" hexmask.long.byte 0x4 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x4 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Replication and Forwarding Engine." rgroup.long 0x164++0x3 line.long 0x0 "NETCCLKR,NETC clock register" hexmask.long.word 0x0 0.--10. 1. "FREQ,Frequency" rgroup.long 0x200++0xF line.long 0x0 "HTA0CAPR,HTA 0 capability register" hexmask.long.byte 0x0 8.--15. 1. "MAX_TX_FRAMES,Maximum number of Tx frames the HTA hardware block can process concurrently." hexmask.long.byte 0x0 0.--7. 1. "MAX_RX_FRAMES,Maximum number of Rx frames the HTA hardware block can process concurrently." line.long 0x4 "HTA0RFCOR,HTA 0 receive frame count operational register" hexmask.long.byte 0x4 24.--31. 1. "LP_HWM,Low watermark of concurrent Rx frames being processed since the last read of this register" hexmask.long.byte 0x4 16.--23. 1. "LP_COUNT,Number of active low priority tier Rx frames currently being processed by the host transfer engine." hexmask.long.byte 0x4 8.--15. 1. "HP_HWM,High watermark of concurrent Rx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x4 0.--7. 1. "HP_COUNT,Number of active high priority tier Rx frames currently being processed by the host transfer engine" line.long 0x8 "HTA0HPBCOR,HTA 0 high priority byte count operational register" hexmask.long.word 0x8 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0x8 0.--15. 1. "HP_COUNT,Amount of DMA bytes in progress for all high priority tier HTA threads." line.long 0xC "HTA0LPBCOR,HTA 0 low priority byte count operational register" hexmask.long.word 0xC 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0xC 0.--15. 1. "LP_COUNT,Amount of DMA bytes in progress for all low priority tier HTA threads." rgroup.long 0x224++0x3 line.long 0x0 "HTA0TFCOR,HTA 0 transmit frame count operational register" hexmask.long.byte 0x0 24.--31. 1. "LP_HWM,Low watermark of concurrent Tx frames being processed since the last read of this register" hexmask.long.byte 0x0 16.--23. 1. "LP_COUNT,Number of active low priority tier Tx frames currently being processed by the host transfer engine." hexmask.long.byte 0x0 8.--15. 1. "HP_HWM,High watermark of concurrent Tx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x0 0.--7. 1. "HP_COUNT,Number of active high priority tier Tx frames currently being processed by the host transfer engine" group.long 0x300++0x3 line.long 0x0 "RC0SBRLAR,Root complex 0 system bus read latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x304++0x3 line.long 0x0 "RC0SBRLHWMR,Root complex 0 system bus read latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." group.long 0x308++0x3 line.long 0x0 "RC0SBWLAR,Root complex 0 system bus write latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x30C++0x3 line.long 0x0 "RC0SBWLHWMR,Root complex 0 system bus write latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0xBF8++0x7 line.long 0x0 "IPBRR0,IP block revision register 0" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP block ID" hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision" hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision" line.long 0x4 "IPBRR1,IP block revision register 1" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,IP block integration options Bit 23-16: Reserved" hexmask.long.byte 0x4 8.--15. 1. "IP_MNT,IP block maintenance version" hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,IP block configuration options" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xD00)++0x3 line.long 0x0 "FBLPR[$1],Function boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value" repeat.end group.long 0xE20++0x7 line.long 0x0 "EMDIOUFSBECR,EMDIO uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "EMDIOUFSBESR,EMDIO uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 0.--3. 1. "SB_ID,System Bus ID" tree.end tree "ENETC0_GLOBAL" base ad:0x4CC20000 rgroup.long 0x4++0x7 line.long 0x0 "SMDTR,Shared memory depletion threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Shared memory depletion threshold in Words" line.long 0x4 "SMACR,Shared memory available count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of available shared memory in words" rgroup.long 0x10++0x17 line.long 0x0 "SMCLWMR,Shared memory count low watermark register" hexmask.long.tbyte 0x0 0.--23. 1. "WATERMARK,Shows the low watermark for shared memory in words since the last read of this register" line.long 0x4 "SMBUCR,Shared memory buffer unassigned count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of unassigned Shared memory buffer in words" line.long 0x8 "SMBUCHWMR,Shared memory buffer unassigned count high watermark register" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,Shows the high watermark for unassigned memory since the last read of this register in words" line.long 0xC "SMLCR,Shared memory loss count register" bitfld.long 0xC 31. "IFDC,Indeterminate frame descriptor corruption Number of words lost due to frame's key meta data (reference count or number of IMUs) corruption" "0,1" bitfld.long 0xC 30. "IFLC,Indeterminate free list corruption Number of words lost due to free list corruption" "0,1" hexmask.long.tbyte 0xC 0.--23. 1. "COUNT,Determinate number of lost words" line.long 0x10 "HBTCAPR,Hash bucket table capability register" hexmask.long.byte 0x10 28.--31. 1. "MAX_VISITS,Specifies the maximum number of hash entries visited during a table management search command" bitfld.long 0x10 24.--26. "MAX_COL,Specifies the maximum exact match hash collisions chain allowed" "0,1,2,3,4,5,6,7" hexmask.long.word 0x10 0.--15. 1. "NUM_ENTRIES,Specifies the total number of allocate bucket entries for use." line.long 0x14 "HBTOR0,Hash bucket table operational register 0" hexmask.long.word 0x14 16.--31. 1. "HWM_ENTRIES,Specifies the high watermark of used buckets Register is reset to NUM_ENTRIES after read." hexmask.long.word 0x14 0.--15. 1. "NUM_ENTRIES,Specifies the amount of entries used" rgroup.long 0x2C++0x3 line.long 0x0 "HBTOR2,Hash bucket table operational register 2" hexmask.long.byte 0x0 16.--19. 1. "HWM_COL,Length of the longest hash collision chain noticed since the last read. Range: 0..8" hexmask.long.byte 0x0 8.--15. 1. "RUN_AVG_INT,The integer portion of the running average length of hash lookup" hexmask.long.byte 0x0 0.--7. 1. "RUN_AVG_FRACT,The fractional portion of the running average length of hash lookup" rgroup.long 0x40++0xB line.long 0x0 "SMERBCAPR,Shared memory ENETC receive buffer capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 Bytes 1-3: reserved" "?,?,?,3: reserved" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Threshold in words of receive buffer memory used by all ENETC functions" line.long 0x4 "SMERBOR0,Shared memory ENETC receive buffer operational register 0" hexmask.long.tbyte 0x4 0.--23. 1. "AMOUNT,Number of words in use for buffers and frame descriptors." line.long 0x8 "SMERBOR1,Shared memory ENETC receive buffer operational 1" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,High watermark of words in use by buffers and frame descriptors since the last read" rgroup.long 0x100++0x7 line.long 0x0 "PCE0OR,PCE 0 operational register" hexmask.long.byte 0x0 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the PCE block" hexmask.long.byte 0x0 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x0 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Parse Classifier Engine." line.long 0x4 "RFE0OR,Replication Forwarding Engine 0 operational register" hexmask.long.byte 0x4 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the RFE block" hexmask.long.byte 0x4 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x4 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Replication and Forwarding Engine." rgroup.long 0x164++0x3 line.long 0x0 "NETCCLKR,NETC clock register" hexmask.long.word 0x0 0.--10. 1. "FREQ,Frequency" rgroup.long 0x200++0xF line.long 0x0 "HTA0CAPR,HTA 0 capability register" hexmask.long.byte 0x0 8.--15. 1. "MAX_TX_FRAMES,Maximum number of Tx frames the HTA hardware block can process concurrently." hexmask.long.byte 0x0 0.--7. 1. "MAX_RX_FRAMES,Maximum number of Rx frames the HTA hardware block can process concurrently." line.long 0x4 "HTA0RFCOR,HTA 0 receive frame count operational register" hexmask.long.byte 0x4 24.--31. 1. "LP_HWM,Low watermark of concurrent Rx frames being processed since the last read of this register" hexmask.long.byte 0x4 16.--23. 1. "LP_COUNT,Number of active low priority tier Rx frames currently being processed by the host transfer engine." hexmask.long.byte 0x4 8.--15. 1. "HP_HWM,High watermark of concurrent Rx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x4 0.--7. 1. "HP_COUNT,Number of active high priority tier Rx frames currently being processed by the host transfer engine" line.long 0x8 "HTA0HPBCOR,HTA 0 high priority byte count operational register" hexmask.long.word 0x8 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0x8 0.--15. 1. "HP_COUNT,Amount of DMA bytes in progress for all high priority tier HTA threads." line.long 0xC "HTA0LPBCOR,HTA 0 low priority byte count operational register" hexmask.long.word 0xC 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0xC 0.--15. 1. "LP_COUNT,Amount of DMA bytes in progress for all low priority tier HTA threads." rgroup.long 0x224++0x3 line.long 0x0 "HTA0TFCOR,HTA 0 transmit frame count operational register" hexmask.long.byte 0x0 24.--31. 1. "LP_HWM,Low watermark of concurrent Tx frames being processed since the last read of this register" hexmask.long.byte 0x0 16.--23. 1. "LP_COUNT,Number of active low priority tier Tx frames currently being processed by the host transfer engine." hexmask.long.byte 0x0 8.--15. 1. "HP_HWM,High watermark of concurrent Tx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x0 0.--7. 1. "HP_COUNT,Number of active high priority tier Tx frames currently being processed by the host transfer engine" group.long 0x300++0x3 line.long 0x0 "RC0SBRLAR,Root complex 0 system bus read latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x304++0x3 line.long 0x0 "RC0SBRLHWMR,Root complex 0 system bus read latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." group.long 0x308++0x3 line.long 0x0 "RC0SBWLAR,Root complex 0 system bus write latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x30C++0x3 line.long 0x0 "RC0SBWLHWMR,Root complex 0 system bus write latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0xBF8++0x7 line.long 0x0 "IPBRR0,IP block revision register 0" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP block ID" hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision" hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision" line.long 0x4 "IPBRR1,IP block revision register 1" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,IP block integration options Bit 23-16: Reserved" hexmask.long.byte 0x4 8.--15. 1. "IP_MNT,IP block maintenance version" hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,IP block configuration options" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xD00)++0x3 line.long 0x0 "FBLPR[$1],Function boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value" repeat.end tree.end tree "ENETC1_GLOBAL" base ad:0x4CCA0000 rgroup.long 0x4++0x7 line.long 0x0 "SMDTR,Shared memory depletion threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Shared memory depletion threshold in Words" line.long 0x4 "SMACR,Shared memory available count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of available shared memory in words" rgroup.long 0x10++0x17 line.long 0x0 "SMCLWMR,Shared memory count low watermark register" hexmask.long.tbyte 0x0 0.--23. 1. "WATERMARK,Shows the low watermark for shared memory in words since the last read of this register" line.long 0x4 "SMBUCR,Shared memory buffer unassigned count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of unassigned Shared memory buffer in words" line.long 0x8 "SMBUCHWMR,Shared memory buffer unassigned count high watermark register" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,Shows the high watermark for unassigned memory since the last read of this register in words" line.long 0xC "SMLCR,Shared memory loss count register" bitfld.long 0xC 31. "IFDC,Indeterminate frame descriptor corruption Number of words lost due to frame's key meta data (reference count or number of IMUs) corruption" "0,1" bitfld.long 0xC 30. "IFLC,Indeterminate free list corruption Number of words lost due to free list corruption" "0,1" hexmask.long.tbyte 0xC 0.--23. 1. "COUNT,Determinate number of lost words" line.long 0x10 "HBTCAPR,Hash bucket table capability register" hexmask.long.byte 0x10 28.--31. 1. "MAX_VISITS,Specifies the maximum number of hash entries visited during a table management search command" bitfld.long 0x10 24.--26. "MAX_COL,Specifies the maximum exact match hash collisions chain allowed" "0,1,2,3,4,5,6,7" hexmask.long.word 0x10 0.--15. 1. "NUM_ENTRIES,Specifies the total number of allocate bucket entries for use." line.long 0x14 "HBTOR0,Hash bucket table operational register 0" hexmask.long.word 0x14 16.--31. 1. "HWM_ENTRIES,Specifies the high watermark of used buckets Register is reset to NUM_ENTRIES after read." hexmask.long.word 0x14 0.--15. 1. "NUM_ENTRIES,Specifies the amount of entries used" rgroup.long 0x2C++0x3 line.long 0x0 "HBTOR2,Hash bucket table operational register 2" hexmask.long.byte 0x0 16.--19. 1. "HWM_COL,Length of the longest hash collision chain noticed since the last read. Range: 0..8" hexmask.long.byte 0x0 8.--15. 1. "RUN_AVG_INT,The integer portion of the running average length of hash lookup" hexmask.long.byte 0x0 0.--7. 1. "RUN_AVG_FRACT,The fractional portion of the running average length of hash lookup" rgroup.long 0x40++0xB line.long 0x0 "SMERBCAPR,Shared memory ENETC receive buffer capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 Bytes 1-3: reserved" "?,?,?,3: reserved" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Threshold in words of receive buffer memory used by all ENETC functions" line.long 0x4 "SMERBOR0,Shared memory ENETC receive buffer operational register 0" hexmask.long.tbyte 0x4 0.--23. 1. "AMOUNT,Number of words in use for buffers and frame descriptors." line.long 0x8 "SMERBOR1,Shared memory ENETC receive buffer operational 1" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,High watermark of words in use by buffers and frame descriptors since the last read" rgroup.long 0x100++0x7 line.long 0x0 "PCE0OR,PCE 0 operational register" hexmask.long.byte 0x0 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the PCE block" hexmask.long.byte 0x0 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x0 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Parse Classifier Engine." line.long 0x4 "RFE0OR,Replication Forwarding Engine 0 operational register" hexmask.long.byte 0x4 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the RFE block" hexmask.long.byte 0x4 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x4 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Replication and Forwarding Engine." rgroup.long 0x164++0x3 line.long 0x0 "NETCCLKR,NETC clock register" hexmask.long.word 0x0 0.--10. 1. "FREQ,Frequency" rgroup.long 0x200++0xF line.long 0x0 "HTA0CAPR,HTA 0 capability register" hexmask.long.byte 0x0 8.--15. 1. "MAX_TX_FRAMES,Maximum number of Tx frames the HTA hardware block can process concurrently." hexmask.long.byte 0x0 0.--7. 1. "MAX_RX_FRAMES,Maximum number of Rx frames the HTA hardware block can process concurrently." line.long 0x4 "HTA0RFCOR,HTA 0 receive frame count operational register" hexmask.long.byte 0x4 24.--31. 1. "LP_HWM,Low watermark of concurrent Rx frames being processed since the last read of this register" hexmask.long.byte 0x4 16.--23. 1. "LP_COUNT,Number of active low priority tier Rx frames currently being processed by the host transfer engine." hexmask.long.byte 0x4 8.--15. 1. "HP_HWM,High watermark of concurrent Rx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x4 0.--7. 1. "HP_COUNT,Number of active high priority tier Rx frames currently being processed by the host transfer engine" line.long 0x8 "HTA0HPBCOR,HTA 0 high priority byte count operational register" hexmask.long.word 0x8 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0x8 0.--15. 1. "HP_COUNT,Amount of DMA bytes in progress for all high priority tier HTA threads." line.long 0xC "HTA0LPBCOR,HTA 0 low priority byte count operational register" hexmask.long.word 0xC 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0xC 0.--15. 1. "LP_COUNT,Amount of DMA bytes in progress for all low priority tier HTA threads." rgroup.long 0x224++0x3 line.long 0x0 "HTA0TFCOR,HTA 0 transmit frame count operational register" hexmask.long.byte 0x0 24.--31. 1. "LP_HWM,Low watermark of concurrent Tx frames being processed since the last read of this register" hexmask.long.byte 0x0 16.--23. 1. "LP_COUNT,Number of active low priority tier Tx frames currently being processed by the host transfer engine." hexmask.long.byte 0x0 8.--15. 1. "HP_HWM,High watermark of concurrent Tx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x0 0.--7. 1. "HP_COUNT,Number of active high priority tier Tx frames currently being processed by the host transfer engine" group.long 0x300++0x3 line.long 0x0 "RC0SBRLAR,Root complex 0 system bus read latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x304++0x3 line.long 0x0 "RC0SBRLHWMR,Root complex 0 system bus read latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." group.long 0x308++0x3 line.long 0x0 "RC0SBWLAR,Root complex 0 system bus write latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x30C++0x3 line.long 0x0 "RC0SBWLHWMR,Root complex 0 system bus write latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0xBF8++0x7 line.long 0x0 "IPBRR0,IP block revision register 0" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP block ID" hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision" hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision" line.long 0x4 "IPBRR1,IP block revision register 1" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,IP block integration options Bit 23-16: Reserved" hexmask.long.byte 0x4 8.--15. 1. "IP_MNT,IP block maintenance version" hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,IP block configuration options" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xD00)++0x3 line.long 0x0 "FBLPR[$1],Function boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value" repeat.end tree.end tree "ENETC2_GLOBAL" base ad:0x4CD20000 rgroup.long 0x4++0x7 line.long 0x0 "SMDTR,Shared memory depletion threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Shared memory depletion threshold in Words" line.long 0x4 "SMACR,Shared memory available count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of available shared memory in words" rgroup.long 0x10++0x17 line.long 0x0 "SMCLWMR,Shared memory count low watermark register" hexmask.long.tbyte 0x0 0.--23. 1. "WATERMARK,Shows the low watermark for shared memory in words since the last read of this register" line.long 0x4 "SMBUCR,Shared memory buffer unassigned count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of unassigned Shared memory buffer in words" line.long 0x8 "SMBUCHWMR,Shared memory buffer unassigned count high watermark register" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,Shows the high watermark for unassigned memory since the last read of this register in words" line.long 0xC "SMLCR,Shared memory loss count register" bitfld.long 0xC 31. "IFDC,Indeterminate frame descriptor corruption Number of words lost due to frame's key meta data (reference count or number of IMUs) corruption" "0,1" bitfld.long 0xC 30. "IFLC,Indeterminate free list corruption Number of words lost due to free list corruption" "0,1" hexmask.long.tbyte 0xC 0.--23. 1. "COUNT,Determinate number of lost words" line.long 0x10 "HBTCAPR,Hash bucket table capability register" hexmask.long.byte 0x10 28.--31. 1. "MAX_VISITS,Specifies the maximum number of hash entries visited during a table management search command" bitfld.long 0x10 24.--26. "MAX_COL,Specifies the maximum exact match hash collisions chain allowed" "0,1,2,3,4,5,6,7" hexmask.long.word 0x10 0.--15. 1. "NUM_ENTRIES,Specifies the total number of allocate bucket entries for use." line.long 0x14 "HBTOR0,Hash bucket table operational register 0" hexmask.long.word 0x14 16.--31. 1. "HWM_ENTRIES,Specifies the high watermark of used buckets Register is reset to NUM_ENTRIES after read." hexmask.long.word 0x14 0.--15. 1. "NUM_ENTRIES,Specifies the amount of entries used" rgroup.long 0x2C++0x3 line.long 0x0 "HBTOR2,Hash bucket table operational register 2" hexmask.long.byte 0x0 16.--19. 1. "HWM_COL,Length of the longest hash collision chain noticed since the last read. Range: 0..8" hexmask.long.byte 0x0 8.--15. 1. "RUN_AVG_INT,The integer portion of the running average length of hash lookup" hexmask.long.byte 0x0 0.--7. 1. "RUN_AVG_FRACT,The fractional portion of the running average length of hash lookup" rgroup.long 0x40++0xB line.long 0x0 "SMERBCAPR,Shared memory ENETC receive buffer capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 Bytes 1-3: reserved" "?,?,?,3: reserved" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Threshold in words of receive buffer memory used by all ENETC functions" line.long 0x4 "SMERBOR0,Shared memory ENETC receive buffer operational register 0" hexmask.long.tbyte 0x4 0.--23. 1. "AMOUNT,Number of words in use for buffers and frame descriptors." line.long 0x8 "SMERBOR1,Shared memory ENETC receive buffer operational 1" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,High watermark of words in use by buffers and frame descriptors since the last read" rgroup.long 0x100++0x7 line.long 0x0 "PCE0OR,PCE 0 operational register" hexmask.long.byte 0x0 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the PCE block" hexmask.long.byte 0x0 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x0 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Parse Classifier Engine." line.long 0x4 "RFE0OR,Replication Forwarding Engine 0 operational register" hexmask.long.byte 0x4 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the RFE block" hexmask.long.byte 0x4 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x4 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Replication and Forwarding Engine." rgroup.long 0x164++0x3 line.long 0x0 "NETCCLKR,NETC clock register" hexmask.long.word 0x0 0.--10. 1. "FREQ,Frequency" rgroup.long 0x200++0xF line.long 0x0 "HTA0CAPR,HTA 0 capability register" hexmask.long.byte 0x0 8.--15. 1. "MAX_TX_FRAMES,Maximum number of Tx frames the HTA hardware block can process concurrently." hexmask.long.byte 0x0 0.--7. 1. "MAX_RX_FRAMES,Maximum number of Rx frames the HTA hardware block can process concurrently." line.long 0x4 "HTA0RFCOR,HTA 0 receive frame count operational register" hexmask.long.byte 0x4 24.--31. 1. "LP_HWM,Low watermark of concurrent Rx frames being processed since the last read of this register" hexmask.long.byte 0x4 16.--23. 1. "LP_COUNT,Number of active low priority tier Rx frames currently being processed by the host transfer engine." hexmask.long.byte 0x4 8.--15. 1. "HP_HWM,High watermark of concurrent Rx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x4 0.--7. 1. "HP_COUNT,Number of active high priority tier Rx frames currently being processed by the host transfer engine" line.long 0x8 "HTA0HPBCOR,HTA 0 high priority byte count operational register" hexmask.long.word 0x8 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0x8 0.--15. 1. "HP_COUNT,Amount of DMA bytes in progress for all high priority tier HTA threads." line.long 0xC "HTA0LPBCOR,HTA 0 low priority byte count operational register" hexmask.long.word 0xC 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0xC 0.--15. 1. "LP_COUNT,Amount of DMA bytes in progress for all low priority tier HTA threads." rgroup.long 0x224++0x3 line.long 0x0 "HTA0TFCOR,HTA 0 transmit frame count operational register" hexmask.long.byte 0x0 24.--31. 1. "LP_HWM,Low watermark of concurrent Tx frames being processed since the last read of this register" hexmask.long.byte 0x0 16.--23. 1. "LP_COUNT,Number of active low priority tier Tx frames currently being processed by the host transfer engine." hexmask.long.byte 0x0 8.--15. 1. "HP_HWM,High watermark of concurrent Tx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x0 0.--7. 1. "HP_COUNT,Number of active high priority tier Tx frames currently being processed by the host transfer engine" group.long 0x300++0x3 line.long 0x0 "RC0SBRLAR,Root complex 0 system bus read latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x304++0x3 line.long 0x0 "RC0SBRLHWMR,Root complex 0 system bus read latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." group.long 0x308++0x3 line.long 0x0 "RC0SBWLAR,Root complex 0 system bus write latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x30C++0x3 line.long 0x0 "RC0SBWLHWMR,Root complex 0 system bus write latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0xBF8++0x7 line.long 0x0 "IPBRR0,IP block revision register 0" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP block ID" hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision" hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision" line.long 0x4 "IPBRR1,IP block revision register 1" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,IP block integration options Bit 23-16: Reserved" hexmask.long.byte 0x4 8.--15. 1. "IP_MNT,IP block maintenance version" hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,IP block configuration options" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xD00)++0x3 line.long 0x0 "FBLPR[$1],Function boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value" repeat.end tree.end tree "TMR0_GLOBAL" base ad:0x4CD90000 rgroup.long 0x4++0x7 line.long 0x0 "SMDTR,Shared memory depletion threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Shared memory depletion threshold in Words" line.long 0x4 "SMACR,Shared memory available count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of available shared memory in words" rgroup.long 0x10++0x17 line.long 0x0 "SMCLWMR,Shared memory count low watermark register" hexmask.long.tbyte 0x0 0.--23. 1. "WATERMARK,Shows the low watermark for shared memory in words since the last read of this register" line.long 0x4 "SMBUCR,Shared memory buffer unassigned count register" hexmask.long.tbyte 0x4 0.--23. 1. "COUNT,Shows the current amount of unassigned Shared memory buffer in words" line.long 0x8 "SMBUCHWMR,Shared memory buffer unassigned count high watermark register" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,Shows the high watermark for unassigned memory since the last read of this register in words" line.long 0xC "SMLCR,Shared memory loss count register" bitfld.long 0xC 31. "IFDC,Indeterminate frame descriptor corruption Number of words lost due to frame's key meta data (reference count or number of IMUs) corruption" "0,1" bitfld.long 0xC 30. "IFLC,Indeterminate free list corruption Number of words lost due to free list corruption" "0,1" hexmask.long.tbyte 0xC 0.--23. 1. "COUNT,Determinate number of lost words" line.long 0x10 "HBTCAPR,Hash bucket table capability register" hexmask.long.byte 0x10 28.--31. 1. "MAX_VISITS,Specifies the maximum number of hash entries visited during a table management search command" bitfld.long 0x10 24.--26. "MAX_COL,Specifies the maximum exact match hash collisions chain allowed" "0,1,2,3,4,5,6,7" hexmask.long.word 0x10 0.--15. 1. "NUM_ENTRIES,Specifies the total number of allocate bucket entries for use." line.long 0x14 "HBTOR0,Hash bucket table operational register 0" hexmask.long.word 0x14 16.--31. 1. "HWM_ENTRIES,Specifies the high watermark of used buckets Register is reset to NUM_ENTRIES after read." hexmask.long.word 0x14 0.--15. 1. "NUM_ENTRIES,Specifies the amount of entries used" rgroup.long 0x2C++0x3 line.long 0x0 "HBTOR2,Hash bucket table operational register 2" hexmask.long.byte 0x0 16.--19. 1. "HWM_COL,Length of the longest hash collision chain noticed since the last read. Range: 0..8" hexmask.long.byte 0x0 8.--15. 1. "RUN_AVG_INT,The integer portion of the running average length of hash lookup" hexmask.long.byte 0x0 0.--7. 1. "RUN_AVG_FRACT,The fractional portion of the running average length of hash lookup" rgroup.long 0x40++0xB line.long 0x0 "SMERBCAPR,Shared memory ENETC receive buffer capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 Bytes 1-3: reserved" "?,?,?,3: reserved" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Threshold in words of receive buffer memory used by all ENETC functions" line.long 0x4 "SMERBOR0,Shared memory ENETC receive buffer operational register 0" hexmask.long.tbyte 0x4 0.--23. 1. "AMOUNT,Number of words in use for buffers and frame descriptors." line.long 0x8 "SMERBOR1,Shared memory ENETC receive buffer operational 1" hexmask.long.tbyte 0x8 0.--23. 1. "WATERMARK,High watermark of words in use by buffers and frame descriptors since the last read" rgroup.long 0x100++0x7 line.long 0x0 "PCE0OR,PCE 0 operational register" hexmask.long.byte 0x0 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the PCE block" hexmask.long.byte 0x0 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x0 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Parse Classifier Engine." line.long 0x4 "RFE0OR,Replication Forwarding Engine 0 operational register" hexmask.long.byte 0x4 16.--21. 1. "MAX_FRAMES,Maximum number of concurrent frames that can be processed by the RFE block" hexmask.long.byte 0x4 8.--13. 1. "HWM_FRAMES,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.byte 0x4 0.--5. 1. "NUM_FRAMES,Number of active frames currently being processed by the Replication and Forwarding Engine." rgroup.long 0x164++0x3 line.long 0x0 "NETCCLKR,NETC clock register" hexmask.long.word 0x0 0.--10. 1. "FREQ,Frequency" rgroup.long 0x200++0xF line.long 0x0 "HTA0CAPR,HTA 0 capability register" hexmask.long.byte 0x0 8.--15. 1. "MAX_TX_FRAMES,Maximum number of Tx frames the HTA hardware block can process concurrently." hexmask.long.byte 0x0 0.--7. 1. "MAX_RX_FRAMES,Maximum number of Rx frames the HTA hardware block can process concurrently." line.long 0x4 "HTA0RFCOR,HTA 0 receive frame count operational register" hexmask.long.byte 0x4 24.--31. 1. "LP_HWM,Low watermark of concurrent Rx frames being processed since the last read of this register" hexmask.long.byte 0x4 16.--23. 1. "LP_COUNT,Number of active low priority tier Rx frames currently being processed by the host transfer engine." hexmask.long.byte 0x4 8.--15. 1. "HP_HWM,High watermark of concurrent Rx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x4 0.--7. 1. "HP_COUNT,Number of active high priority tier Rx frames currently being processed by the host transfer engine" line.long 0x8 "HTA0HPBCOR,HTA 0 high priority byte count operational register" hexmask.long.word 0x8 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0x8 0.--15. 1. "HP_COUNT,Amount of DMA bytes in progress for all high priority tier HTA threads." line.long 0xC "HTA0LPBCOR,HTA 0 low priority byte count operational register" hexmask.long.word 0xC 16.--31. 1. "HWM,High watermark of concurrent frames being processed since the last read of this register" hexmask.long.word 0xC 0.--15. 1. "LP_COUNT,Amount of DMA bytes in progress for all low priority tier HTA threads." rgroup.long 0x224++0x3 line.long 0x0 "HTA0TFCOR,HTA 0 transmit frame count operational register" hexmask.long.byte 0x0 24.--31. 1. "LP_HWM,Low watermark of concurrent Tx frames being processed since the last read of this register" hexmask.long.byte 0x0 16.--23. 1. "LP_COUNT,Number of active low priority tier Tx frames currently being processed by the host transfer engine." hexmask.long.byte 0x0 8.--15. 1. "HP_HWM,High watermark of concurrent Tx frames being processed by HTA since the last read of this register" hexmask.long.byte 0x0 0.--7. 1. "HP_COUNT,Number of active high priority tier Tx frames currently being processed by the host transfer engine" group.long 0x300++0x3 line.long 0x0 "RC0SBRLAR,Root complex 0 system bus read latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x304++0x3 line.long 0x0 "RC0SBRLHWMR,Root complex 0 system bus read latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." group.long 0x308++0x3 line.long 0x0 "RC0SBWLAR,Root complex 0 system bus write latency average register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0x30C++0x3 line.long 0x0 "RC0SBWLHWMR,Root complex 0 system bus write latency high watermark register" hexmask.long.word 0x0 8.--19. 1. "INT,Integer portion of the latency value." hexmask.long.byte 0x0 0.--7. 1. "FRACT,Fractional portion of the latency value." rgroup.long 0xBF8++0x7 line.long 0x0 "IPBRR0,IP block revision register 0" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP block ID" hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision" hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision" line.long 0x4 "IPBRR1,IP block revision register 1" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,IP block integration options Bit 23-16: Reserved" hexmask.long.byte 0x4 8.--15. 1. "IP_MNT,IP block maintenance version" hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,IP block configuration options" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xD00)++0x3 line.long 0x0 "FBLPR[$1],Function boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value" repeat.end group.long 0xE20++0x7 line.long 0x0 "TUFSBECR,Timer uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "TUFSBESR,Timer uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 0.--3. 1. "SB_ID,System Bus ID" tree.end tree.end tree "NETC_IERB" base ad:0x4CFC0000 rgroup.long 0x0++0xF line.long 0x0 "CAPR0,Capability register 0" hexmask.long.byte 0x0 24.--30. 1. "NUM_VSI,Total number of ENETC VSI's instances supported. Range: 0..64" hexmask.long.byte 0x0 19.--23. 1. "NUM_ENETC,Number of ENETC instances supported. Range: 0..23" bitfld.long 0x0 16.--17. "NUM_SW,Number of switch instances supported. Range: 0..2" "0,1,2,3" newline hexmask.long.byte 0x0 8.--12. 1. "NUM_LINKS,Indicates the number of links supported (internal and external). Range: 0..31" bitfld.long 0x0 6.--7. "NUM_TMR,Number of timer instances supported. Range: 0..2" "0,1,2,3" bitfld.long 0x0 4. "NUM_EMDIO,Number of EMDIO instances supported. Range: 0..1" "0,1" line.long 0x4 "CAPR1,Capability register 1" hexmask.long.word 0x4 16.--25. 1. "NUM_TX_BDR,Total number of transmit BD rings supported by NETC. Range: 0..1023" hexmask.long.word 0x4 0.--9. 1. "NUM_RX_BDR,Total number of receive BD rings supported by NETC. Range: 0..1023" line.long 0x8 "CAPR2,Capability register 2" hexmask.long.word 0x8 0.--10. 1. "NUM_MSIX,Number of MSI-X table entries available for allocation by NETC functions" line.long 0xC "CAPR3,Capability register 3" hexmask.long.word 0xC 16.--27. 1. "NUM_VLAN_FTE,Total number of ENETC SI VLAN filter rules supported by NETC." hexmask.long.word 0xC 0.--11. 1. "NUM_MAC_AFTE,Total number of ENETC SI MAC address filter rules supported by NETC." rgroup.long 0x20++0x3 line.long 0x0 "CMCAPR,Common memory capability register" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes 0: 24B 1-3: reserved" "?,?,?,3: reserved" hexmask.long.tbyte 0x0 0.--23. 1. "NUM_WORDS,Total amount of common memory in words available to NETC" rgroup.long 0x30++0x3 line.long 0x0 "ITTMCAPR,Ingress ternary table memory capability register" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bits 0: 48 bits 1-3: reserved" "?,?,?,3: reserved" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Total amount of ternary memory in words available to NETC for ingress port filtering" group.long 0x80++0x7 line.long 0x0 "SMDTR,Shared memory depletion threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Shared memory depletion threshold in Words" line.long 0x4 "ERSMBAR,ENETC receive shared memory buffer allotment register" hexmask.long.tbyte 0x4 0.--23. 1. "THRESH,Threshold in words for internal receive buffer memory used by all ENETC functions" group.long 0xC0++0x7 line.long 0x0 "HTA0HPCR,HTA 0 HP configuration register" hexmask.long.byte 0x0 24.--31. 1. "FLIMIT,HTA global high priority frame limit" hexmask.long.word 0x0 0.--15. 1. "BLIMIT,HTA global high priority byte limit setting" line.long 0x4 "HTA0LPCR,HTA 0 LP configuration register" hexmask.long.byte 0x4 24.--31. 1. "FLIMIT,HTA global low priority Frame Limit" hexmask.long.word 0x4 0.--15. 1. "BLIMIT,HTA global low priority byte limit setting" group.long 0x100++0x7 line.long 0x0 "HBTMAR,Hash bucket table memory allocation register" rbitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" rbitfld.long 0x0 24.--26. "NEPW,Number of table entries per word." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 16.--23. 1. "MIN_WORDS,Minimum number of words required by hardware's hash table algorithm" newline hexmask.long.word 0x0 0.--13. 1. "NUM_WORDS,Number of words allocated from Common Memory" line.long 0x4 "HBTCR,Hash bucket table configuration register" hexmask.long.byte 0x4 4.--7. 1. "MAX_VISITS,Specifies the maximum number of Hash Entries Visited during a Search Table Management Command" bitfld.long 0x4 0.--2. "MAX_COL,Specifies the maximum EM/IM Hash collisions chain length allowed" "0,1,2,3,4,5,6,7" group.long 0x130++0x3 line.long 0x0 "ITTCR,Ingress ternary table configuration register" hexmask.long.byte 0x0 0.--3. 1. "MAX_VISITS,Specifies the maximum number of TCAM Entries Visited during a Search Table Management Command" group.long 0x170++0x3 line.long 0x0 "NETCFLRCR,NETC FLR configuration register" rbitfld.long 0x0 9.--11. "SCALE,Scale" "0,1,2,3,4,5,6,7" hexmask.long.word 0x0 0.--8. 1. "VALUE,Time duration value expressed in SCALE units." group.long 0x178++0x13 line.long 0x0 "NETCCLKFR,NETC clock period fractional register" hexmask.long 0x0 0.--31. 1. "FRAC,NETC Clock Period's fractional nanosecond expressed as the number of fractional nanoseconds per NETC clock" line.long 0x4 "NETCCLKCR,NETC clock configuration register" hexmask.long.word 0x4 16.--25. 1. "PERIOD,Period" hexmask.long.word 0x4 0.--10. 1. "FREQ,Frequency" line.long 0x8 "SBCR,System bus configuration register" bitfld.long 0x8 2.--3. "RBS,System Bus Maximum Read Burst Size" "0,1,2,3" bitfld.long 0x8 0.--1. "WBS,System Bus Maximum Write Burst Size" "0,1,2,3" line.long 0xC "SBOTCR,System bus outstanding transaction control register" hexmask.long 0xC 0.--31. 1. "OT_LIMIT,This is a 32-bit read-write field however only bits 23-16 and 7-0 have any effect on device behavior" line.long 0x10 "SBLGRCR,System bus latency group resource control register" hexmask.long.byte 0x10 8.--11. 1. "LG1_LIMIT,Specifies the maximum share of DMA thread resources that ENETC latency group 1 may occupy" hexmask.long.byte 0x10 0.--3. 1. "LG0_LIMIT,Specifies the maximum share of DMA thread resources that ENETC latency group 0 may occupy at any one time" group.long 0x190++0x3 line.long 0x0 "SGLTTR,Stream gating lag time for timestamp refresh register" hexmask.long.byte 0x0 0.--4. 1. "LAG_TIME,Lag time is a nanosecond value = 2LAG_TIME" group.long 0x208++0x7 line.long 0x0 "RC0MSICAR,Root complex 0 MSI-X cache attribute register" bitfld.long 0x0 6.--7. "MSI_WRSNP,MSI-X write snoop This is the snoop attribute setting used when NETC generates MSI-X events" "0,1,2,3" bitfld.long 0x0 4.--5. "MSI_WRDOMAIN,MSI-X write domain This is the domain attribute setting used when NETC generates MSI-X events." "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "MSI_WRCACHE,MSI-X write cache type This is the cache attribute setting used when NETC generates MSI-X events." line.long 0x4 "RC0MSIAMQR,Root complex 0 MSI access management qualifier register" hexmask.long.byte 0x4 20.--23. 1. "AWQOS,Address Write QoS." rgroup.long 0x314++0x3 line.long 0x0 "EMDIOMCR,EMDIO MSI-X configuration register" bitfld.long 0x0 0. "NUM_MSIX,Number of MSI-X vectors supported. Formula: NUM_MSIX+1 Range: 1" "0,1" group.long 0x320++0x7 line.long 0x0 "EMDIO_CFH_DIDVID,EMDIO config header device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device shown in the PCIe Device ID Register (02h)" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device as shown in the PCIe Vendor ID Register (00h)" line.long 0x4 "EMDIO_CFH_SIDSVID,EMDIO config header subsystem ID and subsystem vendor ID register" hexmask.long.word 0x4 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem Device ID This field identifies the particular subsystem as shown in the PCIe Subsystem ID Register (2Eh)" hexmask.long.word 0x4 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem Vendor ID This field identifies the manufacturer of the subsystem as shown in the PCIe Subsystem Vendor ID Register (2Ch)" rgroup.long 0x344++0x3 line.long 0x0 "EMDIOFAUXR,EMDIO function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x348)++0x3 line.long 0x0 "EMDIOBLPR[$1],EMDIO boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x350++0x3 line.long 0x0 "EMDIO_CFG,EMDIO configuration register" bitfld.long 0x0 5. "MDC_MODE,MDC pin mode 0 Push-pull 1 Open drain" "0,1" bitfld.long 0x0 4. "MDIO_MODE,MDIO pin mode 0 Push-pull 1 Open drain" "0,1" group.long 0x360++0x3 line.long 0x0 "EMDIORIDAR,EMDIO RID assignment register" hexmask.long.byte 0x0 16.--23. 1. "PBUS,Physical bus number within the ECAM space where this function resides." hexmask.long.word 0x0 0.--15. 1. "RID,Function's RID value where RID consists: 15-8 Bus number 7-3 Device number 2-0 Function number The address of the PCIe function's Type0 header within the ECAM space is determined as follows: PBUS<<20 + (RID & 0xFF)<<12)" group.long 0x414++0x3 line.long 0x0 "T0MCR,Timer 0 MSI-X configuration register" bitfld.long 0x0 0. "NUM_MSIX,Number of MSI-X vectors supported for timer function" "0,1" group.long 0x420++0x7 line.long 0x0 "T0_CFH_DIDVID,Timer 0 config header device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device shown in the PCIe Device ID Register (02h)" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device as shown in the PCIe Vendor ID Register (00h)" line.long 0x4 "T0_CFH_SIDSVID,Timer 0 config header subsystem ID and subsystem vendor ID register" hexmask.long.word 0x4 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem Device ID This field identifies the particular subsystem as shown in the PCIe Subsystem ID Register (2Eh)" hexmask.long.word 0x4 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem Vendor ID This field identifies the manufacturer of the subsystem as shown in the PCIe Subsystem Vendor ID Register (2Ch)" group.long 0x430++0x3 line.long 0x0 "T0CAR,Timer 0 cache attribute register" bitfld.long 0x0 22.--23. "RDSNP,Read snoop This is the snoop attribute setting used when NETC reads the generate timestamp array in memory" "0,1,2,3" bitfld.long 0x0 20.--21. "RDDOMAIN,Read domain This is the domain attribute setting used when NETC reads the generate timestamp array in memory" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "RDCACHE,Read cache type This is the cache attribute setting used when NETC reads the generate timestamp array in memory" newline bitfld.long 0x0 6.--7. "WRSNP,Write snoop This is the snoop attribute setting used when NETC writes the receive timestamp array in memory" "0,1,2,3" bitfld.long 0x0 4.--5. "WRDOMAIN,Write domain This is the domain attribute setting used when NETC writes the receive timestamp array in memory" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "WRCACHE,Write cache type This is the cache attribute setting used when NETC writes the receive timestamp array in memory" group.long 0x440++0x3 line.long 0x0 "T0AMQR,Timer 0 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS." hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS." rgroup.long 0x444++0x3 line.long 0x0 "T0FAUXR,Timer 0 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x448++0x7 line.long 0x0 "T0BLPR0,Timer 0 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "T0BLPR1,Timer 0 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." group.long 0x460++0x3 line.long 0x0 "T0RIDAR,Timer 0 RID assignment register" hexmask.long.byte 0x0 16.--23. 1. "PBUS,Physical bus number within the ECAM space where this function resides." hexmask.long.word 0x0 0.--15. 1. "RID,Function's RID value where RID consists: 15-8 Bus number 7-3 Device number 2-0 Function number The address of the PCIe function's Type0 header within the ECAM space is determined as follows: PBUS<<20 + (RID & 0xFF)<<12)" rgroup.long 0x800++0xB line.long 0x0 "TGSMCAPR,Time gate scheduling memory capability register" hexmask.long.byte 0x0 0.--3. 1. "NUM_MEM,The number of time gate scheduler memories is NUM_MEM+1" line.long 0x4 "TGSM0MAPR,Time gate scheduling memory 0 mapping register" hexmask.long.word 0x4 16.--31. 1. "ENETCn,Here 'n' stands for ENETC instance 0 to 15" hexmask.long.word 0x4 0.--15. 1. "SWn,Here 'n' stands for switch instance 0 to 15" line.long 0x8 "TGSM0CAPR,Time gate scheduling memory 0 capability register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,The number of memory words within this time gate scheduling memory." rgroup.long 0x1000++0xB line.long 0x0 "L0CAPR,Link 0 capability register" bitfld.long 0x0 29. "CBS,Credit Based Shaping" "0,1" bitfld.long 0x0 28. "TGS,Time Gate Scheduling" "0,1" hexmask.long.byte 0x0 12.--15. 1. "NUM_TC,Number of Traffic Classes (TCs) supported Formula: NUM_TC+1" newline bitfld.long 0x0 4. "LINK_TYPE,Indicates the link type 0 External Link 1 Pseudo Link" "0,1" line.long 0x4 "L0MCAPR,Link 0 MAC capability register" hexmask.long.byte 0x4 24.--27. 1. "MII_PROT,Indicates the MII protocol supported" bitfld.long 0x4 9.--10. "FP,Indicates if frame preemption is supported" "0,1,2,3" bitfld.long 0x4 8. "HD,Half Duplex capability" "0,1" newline bitfld.long 0x4 4.--5. "EFPAD,Egress frame padding capability" "0,1,2,3" bitfld.long 0x4 0.--2. "MAC_VAR,MAC Variant" "0,1,2,3,4,5,6,7" line.long 0x8 "L0IOCAPR,Link 0 I/O capability register" bitfld.long 0x8 31. "REVMII,Reverse Mode Device Configuration" "0,1" bitfld.long 0x8 30. "REVMII_RATE,RevMII MII rate" "0,1" bitfld.long 0x8 28. "EMDIO,External MDIO supported." "0,1" newline hexmask.long.byte 0x8 24.--27. 1. "IO_VAR,IO Variants supported" hexmask.long.word 0x8 0.--15. 1. "PCS_PROT,PCS protocols supported" group.long 0x1010++0x3 line.long 0x0 "L0BCR,Link 0 binding configuration register" hexmask.long.byte 0x0 8.--12. 1. "MDIO_PHYAD_PRTAD,This value indicate an MDIO PHY address" rbitfld.long 0x0 6. "NETC_FUNC,Primary link end's NETC Function Type" "0,1" hexmask.long.byte 0x0 0.--4. 1. "SW_PORT_ENETC_INST,NETC_FUNC=ENETC: Primary link end's ENETC instance number mapped to this link end" group.long 0x1020++0x7 line.long 0x0 "L0E0MAR0,Link 0 end 0 MAC address register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "L0E0MAR1,Link 0 end 0 MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x1040++0xB line.long 0x0 "L1CAPR,Link 1 capability register" bitfld.long 0x0 29. "CBS,Credit Based Shaping" "0,1" bitfld.long 0x0 28. "TGS,Time Gate Scheduling" "0,1" hexmask.long.byte 0x0 12.--15. 1. "NUM_TC,Number of Traffic Classes (TCs) supported Formula: NUM_TC+1" newline bitfld.long 0x0 4. "LINK_TYPE,Indicates the link type 0 External Link 1 Pseudo Link" "0,1" line.long 0x4 "L1MCAPR,Link 1 MAC capability register" hexmask.long.byte 0x4 24.--27. 1. "MII_PROT,Indicates the MII protocol supported" bitfld.long 0x4 9.--10. "FP,Indicates if frame preemption is supported" "0,1,2,3" bitfld.long 0x4 8. "HD,Half Duplex capability" "0,1" newline bitfld.long 0x4 4.--5. "EFPAD,Egress frame padding capability" "0,1,2,3" bitfld.long 0x4 0.--2. "MAC_VAR,MAC Variant" "0,1,2,3,4,5,6,7" line.long 0x8 "L1IOCAPR,Link 1 I/O capability register" bitfld.long 0x8 31. "REVMII,Reverse Mode Device Configuration" "0,1" bitfld.long 0x8 30. "REVMII_RATE,RevMII MII rate" "0,1" bitfld.long 0x8 28. "EMDIO,External MDIO supported." "0,1" newline hexmask.long.byte 0x8 24.--27. 1. "IO_VAR,IO Variants supported" hexmask.long.word 0x8 0.--15. 1. "PCS_PROT,PCS protocols supported" group.long 0x1050++0x3 line.long 0x0 "L1BCR,Link 1 binding configuration register" hexmask.long.byte 0x0 8.--12. 1. "MDIO_PHYAD_PRTAD,This value indicate an MDIO PHY address" rbitfld.long 0x0 6. "NETC_FUNC,Primary link end's NETC Function Type" "0,1" hexmask.long.byte 0x0 0.--4. 1. "SW_PORT_ENETC_INST,NETC_FUNC=ENETC: Primary link end's ENETC instance number mapped to this link end" group.long 0x1060++0x7 line.long 0x0 "L1E0MAR0,Link 1 end 0 MAC address register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "L1E0MAR1,Link 1 end 0 MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x1080++0xB line.long 0x0 "L2CAPR,Link 2 capability register" bitfld.long 0x0 29. "CBS,Credit Based Shaping" "0,1" bitfld.long 0x0 28. "TGS,Time Gate Scheduling" "0,1" hexmask.long.byte 0x0 12.--15. 1. "NUM_TC,Number of Traffic Classes (TCs) supported Formula: NUM_TC+1" newline bitfld.long 0x0 4. "LINK_TYPE,Indicates the link type 0 External Link 1 Pseudo Link" "0,1" line.long 0x4 "L2MCAPR,Link 2 MAC capability register" hexmask.long.byte 0x4 24.--27. 1. "MII_PROT,Indicates the MII protocol supported" bitfld.long 0x4 9.--10. "FP,Indicates if frame preemption is supported" "0,1,2,3" bitfld.long 0x4 8. "HD,Half Duplex capability" "0,1" newline bitfld.long 0x4 4.--5. "EFPAD,Egress frame padding capability" "0,1,2,3" bitfld.long 0x4 0.--2. "MAC_VAR,MAC Variant" "0,1,2,3,4,5,6,7" line.long 0x8 "L2IOCAPR,Link 2 I/O capability register" bitfld.long 0x8 31. "REVMII,Reverse Mode Device Configuration" "0,1" bitfld.long 0x8 30. "REVMII_RATE,RevMII MII rate" "0,1" bitfld.long 0x8 28. "EMDIO,External MDIO supported." "0,1" newline hexmask.long.byte 0x8 24.--27. 1. "IO_VAR,IO Variants supported" hexmask.long.word 0x8 0.--15. 1. "PCS_PROT,PCS protocols supported" group.long 0x1090++0x3 line.long 0x0 "L2BCR,Link 2 binding configuration register" hexmask.long.byte 0x0 8.--12. 1. "MDIO_PHYAD_PRTAD,This value indicate an MDIO PHY address" rbitfld.long 0x0 6. "NETC_FUNC,Primary link end's NETC Function Type" "0,1" hexmask.long.byte 0x0 0.--4. 1. "SW_PORT_ENETC_INST,NETC_FUNC=ENETC: Primary link end's ENETC instance number mapped to this link end" group.long 0x10A0++0x7 line.long 0x0 "L2E0MAR0,Link 2 end 0 MAC address register 0" hexmask.long 0x0 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "L2E0MAR1,Link 2 end 0 MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x3004++0x7 line.long 0x0 "E0BCR1,ENETC 0 binding configuration register 1" hexmask.long.word 0x0 16.--25. 1. "NUM_TX_BDR,Number of Tx BD rings supported by ENETC" hexmask.long.word 0x0 0.--9. 1. "NUM_RX_BDR,Number of Rx BD rings supported by ENETC" line.long 0x4 "E0BCR2,ENETC 0 binding configuration register 2" hexmask.long.word 0x4 16.--27. 1. "NUM_VLAN_FTE,Number of ENETC SI VLAN filter rules supported" hexmask.long.word 0x4 0.--11. 1. "NUM_MAC_AFTE,Number of ENETC SI MAC address filter rules supported" group.long 0x3010++0x7 line.long 0x0 "E0VFRIDAR,ENETC 0 VF RID assignment register" hexmask.long.word 0x0 16.--31. 1. "OFFSET,Specifies the offset in number of functions where the first VF associated with the PF resides." bitfld.long 0x0 8.--9. "STRIDE,Indicates the stride in number of functions from one VF to the next VF for all VFs associated with the ENETC PF" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "NUM_VF,Indicates the number of VFs supported by this ENETC instance" line.long 0x4 "E0MCR,ENETC 0 MSI-X configuration register" hexmask.long.word 0x4 0.--10. 1. "NUM_MSIX,Number of MSI-X vectors supported for ENETC function" group.long 0x3020++0xB line.long 0x0 "E0_CFH_DIDVID,ENETC 0 config header device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device shown in the PCIe Device ID Register (02h)" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device as shown in the PCIe Vendor ID Register (00h)" line.long 0x4 "E0_CFH_SIDSVID,ENETC 0 config header subsystem ID and subsystem vendor ID register" hexmask.long.word 0x4 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem Device ID This field identifies the particular subsystem as shown in the PCIe Subsystem ID Register (2Eh)" hexmask.long.word 0x4 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem Vendor ID This field identifies the manufacturer of the subsystem as shown in the PCIe Subsystem Vendor ID Register (2Ch)" line.long 0x8 "E0_CFC_VFDID,ENETC 0 config capability VF device ID register" hexmask.long.word 0x8 16.--31. 1. "VF_DEVICE_ID,VF Device ID This field identifies the device ID for a virtual function as shown in the PCIe SR-IOV Capability Structure (20h)" group.long 0x3030++0xB line.long 0x0 "E0BCAR,ENETC 0 buffer cache attribute register 0" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop This is the snoop attribute setting used when ENETC reads frame data from memory" "0,1,2,3" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads frame data from memory." "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads frame data from memory" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when ENETC reads the buffer descriptor from memory" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when ENETC reads the buffer descriptor from memory" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when ENETC writes frame data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes frame data to memory." "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes frame data to memory" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop This is the snoop attribute setting used when ENETC writes the buffer descriptor in memory" "0,1,2,3" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when ENETC writes the buffer descriptor in memory" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when ENETC writes the buffer descriptor in memory" line.long 0x4 "E0MCAR,ENETC 0 message cache attribute register" bitfld.long 0x4 22.--23. "MSG_RDSNP,SI messaging read data snoop This is the snoop attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" bitfld.long 0x4 20.--21. "MSG_RDDOMAIN,SI messaging read data domain This is the domain attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" hexmask.long.byte 0x4 16.--19. 1. "MSG_RDCACHE,SI messaging read data cache type This is the cache attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" newline bitfld.long 0x4 6.--7. "MSG_WRSNP,SI messaging write snoop This is the snoop attribute setting used when ENETC writes PSI-VSI message during partition copy" "0,1,2,3" bitfld.long 0x4 4.--5. "MSG_WRDOMAIN,SI messaging write domain This is the domain attribute setting used when ENETC writes PSI-VSI message during partition copy" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "MSG_WRCACHE,SI messaging write cache type This is the cache attribute setting used when ENETC writes PSI-VSI message during partition copy" line.long 0x8 "E0CAR,ENETC 0 command cache attribute register" bitfld.long 0x8 30.--31. "CRDSNP,Read data snoop This is the snoop attribute setting used when ENETC reads command data from memory" "0,1,2,3" bitfld.long 0x8 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads command data from memory" "0,1,2,3" hexmask.long.byte 0x8 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads command data from memory" newline bitfld.long 0x8 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when ENETC reads the command buffer descriptor from memory" "0,1,2,3" hexmask.long.byte 0x8 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when ENETC reads the command buffer descriptor from memory" newline bitfld.long 0x8 14.--15. "CWRSNP,Write data snoop This is the snoop attribute setting used when ENETC writes command data to memory" "0,1,2,3" bitfld.long 0x8 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes command data to memory" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes command data to memory" newline bitfld.long 0x8 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop This is the snoop attribute setting used when ENETC writes the command buffer descriptor in memory" "0,1,2,3" bitfld.long 0x8 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when ENETC writes the command buffer descriptor in memory" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when ENETC writes the command buffer descriptor in memory" group.long 0x3040++0x3 line.long 0x0 "E0AMQR,ENETC 0 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x3044++0x3 line.long 0x0 "E0FAUXR,ENETC 0 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x3048++0xF line.long 0x0 "E0BLPR0,ENETC 0 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "E0BLPR1,ENETC 0 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "E0RXMBER,ENETC 0 receive memory buffer entitlement register" hexmask.long.tbyte 0x8 0.--23. 1. "AMOUNT,Receive memory buffer entitlement in words This receive Memory Buffer Entitlement is used in determining smart drop for ingress congestion control" line.long 0xC "E0RXMBLR,ENETC 0 receive memory buffer limit register" hexmask.long.tbyte 0xC 0.--23. 1. "LIMIT,Receive buffer memory limit in words" group.long 0x3060++0x3 line.long 0x0 "E0RIDAR,ENETC 0 RID assignment register" hexmask.long.byte 0x0 16.--23. 1. "PBUS,Physical bus number within the ECAM space where this function resides." hexmask.long.word 0x0 0.--15. 1. "RID,Function's RID value where RID consists: 15-8 Bus number 7-3 Device number 2-0 Function number The address of the PCIe function's Type0 header within the ECAM space is determined as follows: PBUS<<20 + (RID & 0xFF)<<12)" group.long 0x3070++0xB line.long 0x0 "E0TXHPTBCR,ENETC 0 transmit high priority tier byte credit register" hexmask.long.word 0x0 0.--15. 1. "BYTE_CREDIT,This register field is used to configure the maximum number of high priority byte credits for the port-per-HTA Transmit priority (2 priorities) byte credit-based flow control mechanism" line.long 0x4 "E0TXLPTBCR,ENETC 0 transmit low priority tier byte credit register" hexmask.long.word 0x4 0.--15. 1. "BYTE_CREDIT,This register field is used to configure the maximum number of low priority byte credits for the port-per-HTA Transmit priority (2 priorities) byte credit-based flow control mechanism" line.long 0x8 "E0LGAR,ENETC 0 latency group assignment register" bitfld.long 0x8 0.--1. "LG,Latency Group" "0,1,2,3" group.long 0x3080++0xB line.long 0x0 "E0HTMAR,ENETC 0 hash table memory allotment register" rbitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table." "0: Common memory,?,?,?" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of words allotted to exact match hash table from the common memory's shared region" line.long 0x4 "E0ITMAR,ENETC 0 index table memory allocation register" rbitfld.long 0x4 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,Number of WORDS allocated to ENETC's index table memory" line.long 0x8 "E0IPFTMAR,ENETC 0 ingress port filter table memory allocation register" hexmask.long.word 0x8 0.--15. 1. "ALLOC,Number of words allocated to the ENETC Ingress Port Filter table from ingress port filter ternary memory" group.long 0x30A0++0xB line.long 0x0 "E0RPITMAR,ENETC 0 rate policer index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" line.long 0x4 "E0ISCITMAR,ENETC 0 ingress stream counter index table memory allocation register" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each entry occupies 1 word." line.long 0x8 "E0ISITMAR,ENETC 0 ingress stream index table memory allocation register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x30B4++0x7 line.long 0x0 "E0SGIITMAR,ENETC 0 stream gate instance index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" line.long 0x4 "E0SGCLITMAR,ENETC 0 stream gate control list index table memory allocation register" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x30F0++0x7 line.long 0x0 "E0TGSTAR,ENETC 0 time gate scheduling table allocation register" hexmask.long.word 0x0 0.--11. 1. "NUM_WORDS,This field specifies the number of memories in the Time Gate Scheduling internal memory (TGSM0CAPR) allocated to support the ENETC instance a Time Gate Scheduling table which in turn contains the administrative gate control list and the.." line.long 0x4 "E0TGSLR,ENETC 0 time gate scheduling lookahead register" bitfld.long 0x4 31. "ZERO_LOOKAHEAD,Zero Lookahead" "0,1" hexmask.long.tbyte 0x4 0.--19. 1. "MIN_LOOKAHEAD,Minimum lookahead This field specifies the amount of time to advance the IEEE 1588 time scale used by the time-based scheduler (at the frame scheduling timing point) to account for the time required to schedule dequeue and load (or DMA).." rgroup.long 0x3104++0x7 line.long 0x0 "E1BCR1,ENETC 1 binding configuration register 1" hexmask.long.word 0x0 16.--25. 1. "NUM_TX_BDR,Number of Tx BD rings supported by ENETC" hexmask.long.word 0x0 0.--9. 1. "NUM_RX_BDR,Number of Rx BD rings supported by ENETC" line.long 0x4 "E1BCR2,ENETC 1 binding configuration register 2" hexmask.long.word 0x4 16.--27. 1. "NUM_VLAN_FTE,Number of ENETC SI VLAN filter rules supported" hexmask.long.word 0x4 0.--11. 1. "NUM_MAC_AFTE,Number of ENETC SI MAC address filter rules supported" group.long 0x3110++0x7 line.long 0x0 "E1VFRIDAR,ENETC 1 VF RID assignment register" hexmask.long.word 0x0 16.--31. 1. "OFFSET,Specifies the offset in number of functions where the first VF associated with the PF resides." bitfld.long 0x0 8.--9. "STRIDE,Indicates the stride in number of functions from one VF to the next VF for all VFs associated with the ENETC PF" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "NUM_VF,Indicates the number of VFs supported by this ENETC instance" line.long 0x4 "E1MCR,ENETC 1 MSI-X configuration register" hexmask.long.word 0x4 0.--10. 1. "NUM_MSIX,Number of MSI-X vectors supported for ENETC function" group.long 0x3120++0xB line.long 0x0 "E1_CFH_DIDVID,ENETC 1 config header device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device shown in the PCIe Device ID Register (02h)" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device as shown in the PCIe Vendor ID Register (00h)" line.long 0x4 "E1_CFH_SIDSVID,ENETC 1 config header subsystem ID and subsystem vendor ID register" hexmask.long.word 0x4 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem Device ID This field identifies the particular subsystem as shown in the PCIe Subsystem ID Register (2Eh)" hexmask.long.word 0x4 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem Vendor ID This field identifies the manufacturer of the subsystem as shown in the PCIe Subsystem Vendor ID Register (2Ch)" line.long 0x8 "E1_CFC_VFDID,ENETC 1 config capability VF device ID register" hexmask.long.word 0x8 16.--31. 1. "VF_DEVICE_ID,VF Device ID This field identifies the device ID for a virtual function as shown in the PCIe SR-IOV Capability Structure (20h)" group.long 0x3130++0xB line.long 0x0 "E1BCAR,ENETC 1 buffer cache attribute register 0" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop This is the snoop attribute setting used when ENETC reads frame data from memory" "0,1,2,3" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads frame data from memory." "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads frame data from memory" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when ENETC reads the buffer descriptor from memory" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when ENETC reads the buffer descriptor from memory" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when ENETC writes frame data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes frame data to memory." "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes frame data to memory" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop This is the snoop attribute setting used when ENETC writes the buffer descriptor in memory" "0,1,2,3" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when ENETC writes the buffer descriptor in memory" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when ENETC writes the buffer descriptor in memory" line.long 0x4 "E1MCAR,ENETC 1 message cache attribute register" bitfld.long 0x4 22.--23. "MSG_RDSNP,SI messaging read data snoop This is the snoop attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" bitfld.long 0x4 20.--21. "MSG_RDDOMAIN,SI messaging read data domain This is the domain attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" hexmask.long.byte 0x4 16.--19. 1. "MSG_RDCACHE,SI messaging read data cache type This is the cache attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" newline bitfld.long 0x4 6.--7. "MSG_WRSNP,SI messaging write snoop This is the snoop attribute setting used when ENETC writes PSI-VSI message during partition copy" "0,1,2,3" bitfld.long 0x4 4.--5. "MSG_WRDOMAIN,SI messaging write domain This is the domain attribute setting used when ENETC writes PSI-VSI message during partition copy" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "MSG_WRCACHE,SI messaging write cache type This is the cache attribute setting used when ENETC writes PSI-VSI message during partition copy" line.long 0x8 "E1CAR,ENETC 1 command cache attribute register" bitfld.long 0x8 30.--31. "CRDSNP,Read data snoop This is the snoop attribute setting used when ENETC reads command data from memory" "0,1,2,3" bitfld.long 0x8 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads command data from memory" "0,1,2,3" hexmask.long.byte 0x8 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads command data from memory" newline bitfld.long 0x8 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when ENETC reads the command buffer descriptor from memory" "0,1,2,3" hexmask.long.byte 0x8 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when ENETC reads the command buffer descriptor from memory" newline bitfld.long 0x8 14.--15. "CWRSNP,Write data snoop This is the snoop attribute setting used when ENETC writes command data to memory" "0,1,2,3" bitfld.long 0x8 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes command data to memory" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes command data to memory" newline bitfld.long 0x8 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop This is the snoop attribute setting used when ENETC writes the command buffer descriptor in memory" "0,1,2,3" bitfld.long 0x8 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when ENETC writes the command buffer descriptor in memory" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when ENETC writes the command buffer descriptor in memory" group.long 0x3140++0x3 line.long 0x0 "E1AMQR,ENETC 1 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x3144++0x3 line.long 0x0 "E1FAUXR,ENETC 1 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x3148++0xF line.long 0x0 "E1BLPR0,ENETC 1 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "E1BLPR1,ENETC 1 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "E1RXMBER,ENETC 1 receive memory buffer entitlement register" hexmask.long.tbyte 0x8 0.--23. 1. "AMOUNT,Receive memory buffer entitlement in words This receive Memory Buffer Entitlement is used in determining smart drop for ingress congestion control" line.long 0xC "E1RXMBLR,ENETC 1 receive memory buffer limit register" hexmask.long.tbyte 0xC 0.--23. 1. "LIMIT,Receive buffer memory limit in words" group.long 0x3160++0x3 line.long 0x0 "E1RIDAR,ENETC 1 RID assignment register" hexmask.long.byte 0x0 16.--23. 1. "PBUS,Physical bus number within the ECAM space where this function resides." hexmask.long.word 0x0 0.--15. 1. "RID,Function's RID value where RID consists: 15-8 Bus number 7-3 Device number 2-0 Function number The address of the PCIe function's Type0 header within the ECAM space is determined as follows: PBUS<<20 + (RID & 0xFF)<<12)" group.long 0x3170++0xB line.long 0x0 "E1TXHPTBCR,ENETC 1 transmit high priority tier byte credit register" hexmask.long.word 0x0 0.--15. 1. "BYTE_CREDIT,This register field is used to configure the maximum number of high priority byte credits for the port-per-HTA Transmit priority (2 priorities) byte credit-based flow control mechanism" line.long 0x4 "E1TXLPTBCR,ENETC 1 transmit low priority tier byte credit register" hexmask.long.word 0x4 0.--15. 1. "BYTE_CREDIT,This register field is used to configure the maximum number of low priority byte credits for the port-per-HTA Transmit priority (2 priorities) byte credit-based flow control mechanism" line.long 0x8 "E1LGAR,ENETC 1 latency group assignment register" bitfld.long 0x8 0.--1. "LG,Latency Group" "0,1,2,3" group.long 0x3180++0xB line.long 0x0 "E1HTMAR,ENETC 1 hash table memory allotment register" rbitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table." "0: Common memory,?,?,?" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of words allotted to exact match hash table from the common memory's shared region" line.long 0x4 "E1ITMAR,ENETC 1 index table memory allocation register" rbitfld.long 0x4 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,Number of WORDS allocated to ENETC's index table memory" line.long 0x8 "E1IPFTMAR,ENETC 1 ingress port filter table memory allocation register" hexmask.long.word 0x8 0.--15. 1. "ALLOC,Number of words allocated to the ENETC Ingress Port Filter table from ingress port filter ternary memory" group.long 0x31A0++0xB line.long 0x0 "E1RPITMAR,ENETC 1 rate policer index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" line.long 0x4 "E1ISCITMAR,ENETC 1 ingress stream counter index table memory allocation register" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each entry occupies 1 word." line.long 0x8 "E1ISITMAR,ENETC 1 ingress stream index table memory allocation register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x31B4++0x7 line.long 0x0 "E1SGIITMAR,ENETC 1 stream gate instance index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" line.long 0x4 "E1SGCLITMAR,ENETC 1 stream gate control list index table memory allocation register" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x31F0++0x7 line.long 0x0 "E1TGSTAR,ENETC 1 time gate scheduling table allocation register" hexmask.long.word 0x0 0.--11. 1. "NUM_WORDS,This field specifies the number of memories in the Time Gate Scheduling internal memory (TGSM0CAPR) allocated to support the ENETC instance a Time Gate Scheduling table which in turn contains the administrative gate control list and the.." line.long 0x4 "E1TGSLR,ENETC 1 time gate scheduling lookahead register" bitfld.long 0x4 31. "ZERO_LOOKAHEAD,Zero Lookahead" "0,1" hexmask.long.tbyte 0x4 0.--19. 1. "MIN_LOOKAHEAD,Minimum lookahead This field specifies the amount of time to advance the IEEE 1588 time scale used by the time-based scheduler (at the frame scheduling timing point) to account for the time required to schedule dequeue and load (or DMA).." rgroup.long 0x3204++0x7 line.long 0x0 "E2BCR1,ENETC 2 binding configuration register 1" hexmask.long.word 0x0 16.--25. 1. "NUM_TX_BDR,Number of Tx BD rings supported by ENETC" hexmask.long.word 0x0 0.--9. 1. "NUM_RX_BDR,Number of Rx BD rings supported by ENETC" line.long 0x4 "E2BCR2,ENETC 2 binding configuration register 2" hexmask.long.word 0x4 16.--27. 1. "NUM_VLAN_FTE,Number of ENETC SI VLAN filter rules supported" hexmask.long.word 0x4 0.--11. 1. "NUM_MAC_AFTE,Number of ENETC SI MAC address filter rules supported" group.long 0x3210++0x7 line.long 0x0 "E2VFRIDAR,ENETC 2 VF RID assignment register" hexmask.long.word 0x0 16.--31. 1. "OFFSET,Specifies the offset in number of functions where the first VF associated with the PF resides." bitfld.long 0x0 8.--9. "STRIDE,Indicates the stride in number of functions from one VF to the next VF for all VFs associated with the ENETC PF" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "NUM_VF,Indicates the number of VFs supported by this ENETC instance" line.long 0x4 "E2MCR,ENETC 2 MSI-X configuration register" hexmask.long.word 0x4 0.--10. 1. "NUM_MSIX,Number of MSI-X vectors supported for ENETC function" group.long 0x3220++0xB line.long 0x0 "E2_CFH_DIDVID,ENETC 2 config header device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device shown in the PCIe Device ID Register (02h)" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device as shown in the PCIe Vendor ID Register (00h)" line.long 0x4 "E2_CFH_SIDSVID,ENETC 2 config header subsystem ID and subsystem vendor ID register" hexmask.long.word 0x4 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem Device ID This field identifies the particular subsystem as shown in the PCIe Subsystem ID Register (2Eh)" hexmask.long.word 0x4 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem Vendor ID This field identifies the manufacturer of the subsystem as shown in the PCIe Subsystem Vendor ID Register (2Ch)" line.long 0x8 "E2_CFC_VFDID,ENETC 2 config capability VF device ID register" hexmask.long.word 0x8 16.--31. 1. "VF_DEVICE_ID,VF Device ID This field identifies the device ID for a virtual function as shown in the PCIe SR-IOV Capability Structure (20h)" group.long 0x3230++0xB line.long 0x0 "E2BCAR,ENETC 2 buffer cache attribute register 0" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop This is the snoop attribute setting used when ENETC reads frame data from memory" "0,1,2,3" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads frame data from memory." "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads frame data from memory" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when ENETC reads the buffer descriptor from memory" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when ENETC reads the buffer descriptor from memory" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when ENETC writes frame data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes frame data to memory." "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes frame data to memory" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop This is the snoop attribute setting used when ENETC writes the buffer descriptor in memory" "0,1,2,3" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when ENETC writes the buffer descriptor in memory" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when ENETC writes the buffer descriptor in memory" line.long 0x4 "E2MCAR,ENETC 2 message cache attribute register" bitfld.long 0x4 22.--23. "MSG_RDSNP,SI messaging read data snoop This is the snoop attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" bitfld.long 0x4 20.--21. "MSG_RDDOMAIN,SI messaging read data domain This is the domain attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" hexmask.long.byte 0x4 16.--19. 1. "MSG_RDCACHE,SI messaging read data cache type This is the cache attribute setting used when ENETC reads PSI-VSI message from memory during partition copy" newline bitfld.long 0x4 6.--7. "MSG_WRSNP,SI messaging write snoop This is the snoop attribute setting used when ENETC writes PSI-VSI message during partition copy" "0,1,2,3" bitfld.long 0x4 4.--5. "MSG_WRDOMAIN,SI messaging write domain This is the domain attribute setting used when ENETC writes PSI-VSI message during partition copy" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "MSG_WRCACHE,SI messaging write cache type This is the cache attribute setting used when ENETC writes PSI-VSI message during partition copy" line.long 0x8 "E2CAR,ENETC 2 command cache attribute register" bitfld.long 0x8 30.--31. "CRDSNP,Read data snoop This is the snoop attribute setting used when ENETC reads command data from memory" "0,1,2,3" bitfld.long 0x8 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads command data from memory" "0,1,2,3" hexmask.long.byte 0x8 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads command data from memory" newline bitfld.long 0x8 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when ENETC reads the command buffer descriptor from memory" "0,1,2,3" hexmask.long.byte 0x8 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when ENETC reads the command buffer descriptor from memory" newline bitfld.long 0x8 14.--15. "CWRSNP,Write data snoop This is the snoop attribute setting used when ENETC writes command data to memory" "0,1,2,3" bitfld.long 0x8 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes command data to memory" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes command data to memory" newline bitfld.long 0x8 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop This is the snoop attribute setting used when ENETC writes the command buffer descriptor in memory" "0,1,2,3" bitfld.long 0x8 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when ENETC writes the command buffer descriptor in memory" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when ENETC writes the command buffer descriptor in memory" group.long 0x3240++0x3 line.long 0x0 "E2AMQR,ENETC 2 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x3244++0x3 line.long 0x0 "E2FAUXR,ENETC 2 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x3248++0xF line.long 0x0 "E2BLPR0,ENETC 2 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "E2BLPR1,ENETC 2 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "E2RXMBER,ENETC 2 receive memory buffer entitlement register" hexmask.long.tbyte 0x8 0.--23. 1. "AMOUNT,Receive memory buffer entitlement in words This receive Memory Buffer Entitlement is used in determining smart drop for ingress congestion control" line.long 0xC "E2RXMBLR,ENETC 2 receive memory buffer limit register" hexmask.long.tbyte 0xC 0.--23. 1. "LIMIT,Receive buffer memory limit in words" group.long 0x3260++0x3 line.long 0x0 "E2RIDAR,ENETC 2 RID assignment register" hexmask.long.byte 0x0 16.--23. 1. "PBUS,Physical bus number within the ECAM space where this function resides." hexmask.long.word 0x0 0.--15. 1. "RID,Function's RID value where RID consists: 15-8 Bus number 7-3 Device number 2-0 Function number The address of the PCIe function's Type0 header within the ECAM space is determined as follows: PBUS<<20 + (RID & 0xFF)<<12)" group.long 0x3270++0xB line.long 0x0 "E2TXHPTBCR,ENETC 2 transmit high priority tier byte credit register" hexmask.long.word 0x0 0.--15. 1. "BYTE_CREDIT,This register field is used to configure the maximum number of high priority byte credits for the port-per-HTA Transmit priority (2 priorities) byte credit-based flow control mechanism" line.long 0x4 "E2TXLPTBCR,ENETC 2 transmit low priority tier byte credit register" hexmask.long.word 0x4 0.--15. 1. "BYTE_CREDIT,This register field is used to configure the maximum number of low priority byte credits for the port-per-HTA Transmit priority (2 priorities) byte credit-based flow control mechanism" line.long 0x8 "E2LGAR,ENETC 2 latency group assignment register" bitfld.long 0x8 0.--1. "LG,Latency Group" "0,1,2,3" group.long 0x3280++0xB line.long 0x0 "E2HTMAR,ENETC 2 hash table memory allotment register" rbitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table." "0: Common memory,?,?,?" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of words allotted to exact match hash table from the common memory's shared region" line.long 0x4 "E2ITMAR,ENETC 2 index table memory allocation register" rbitfld.long 0x4 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1-3: Reserved" "0: Common memory 1-3: Reserved,?,?,?" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,Number of WORDS allocated to ENETC's index table memory" line.long 0x8 "E2IPFTMAR,ENETC 2 ingress port filter table memory allocation register" hexmask.long.word 0x8 0.--15. 1. "ALLOC,Number of words allocated to the ENETC Ingress Port Filter table from ingress port filter ternary memory" group.long 0x32A0++0xB line.long 0x0 "E2RPITMAR,ENETC 2 rate policer index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" line.long 0x4 "E2ISCITMAR,ENETC 2 ingress stream counter index table memory allocation register" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each entry occupies 1 word." line.long 0x8 "E2ISITMAR,ENETC 2 ingress stream index table memory allocation register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x32B4++0x7 line.long 0x0 "E2SGIITMAR,ENETC 2 stream gate instance index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" line.long 0x4 "E2SGCLITMAR,ENETC 2 stream gate control list index table memory allocation register" hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x32F0++0x7 line.long 0x0 "E2TGSTAR,ENETC 2 time gate scheduling table allocation register" hexmask.long.word 0x0 0.--11. 1. "NUM_WORDS,This field specifies the number of memories in the Time Gate Scheduling internal memory (TGSM0CAPR) allocated to support the ENETC instance a Time Gate Scheduling table which in turn contains the administrative gate control list and the.." line.long 0x4 "E2TGSLR,ENETC 2 time gate scheduling lookahead register" bitfld.long 0x4 31. "ZERO_LOOKAHEAD,Zero Lookahead" "0,1" hexmask.long.tbyte 0x4 0.--19. 1. "MIN_LOOKAHEAD,Minimum lookahead This field specifies the amount of time to advance the IEEE 1588 time scale used by the time-based scheduler (at the frame scheduling timing point) to account for the time required to schedule dequeue and load (or DMA).." group.long 0x4000++0x3 line.long 0x0 "V0AMQR,VSI 0 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x4004++0x3 line.long 0x0 "V0FAUXR,VF 0 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x4008++0xF line.long 0x0 "V0BLPR0,VSI 0 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "V0BLPR1,VSI 0 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "V0PMAR0,VSI 0 primary MAC address register 0" hexmask.long 0x8 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0xC "V0PMAR1,VSI 0 primary MAC address register 1" hexmask.long.word 0xC 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" group.long 0x4040++0x3 line.long 0x0 "V1AMQR,VSI 1 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x4044++0x3 line.long 0x0 "V1FAUXR,VF 1 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x4048++0xF line.long 0x0 "V1BLPR0,VSI 1 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "V1BLPR1,VSI 1 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "V1PMAR0,VSI 1 primary MAC address register 0" hexmask.long 0x8 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0xC "V1PMAR1,VSI 1 primary MAC address register 1" hexmask.long.word 0xC 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" group.long 0x4080++0x3 line.long 0x0 "V2AMQR,VSI 2 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x4084++0x3 line.long 0x0 "V2FAUXR,VF 2 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x4088++0xF line.long 0x0 "V2BLPR0,VSI 2 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "V2BLPR1,VSI 2 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "V2PMAR0,VSI 2 primary MAC address register 0" hexmask.long 0x8 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0xC "V2PMAR1,VSI 2 primary MAC address register 1" hexmask.long.word 0xC 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" group.long 0x40C0++0x3 line.long 0x0 "V3AMQR,VSI 3 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x40C4++0x3 line.long 0x0 "V3FAUXR,VF 3 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x40C8++0xF line.long 0x0 "V3BLPR0,VSI 3 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "V3BLPR1,VSI 3 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "V3PMAR0,VSI 3 primary MAC address register 0" hexmask.long 0x8 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0xC "V3PMAR1,VSI 3 primary MAC address register 1" hexmask.long.word 0xC 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" group.long 0x4100++0x3 line.long 0x0 "V4AMQR,VSI 4 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x4104++0x3 line.long 0x0 "V4FAUXR,VF 4 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x4108++0xF line.long 0x0 "V4BLPR0,VSI 4 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "V4BLPR1,VSI 4 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "V4PMAR0,VSI 4 primary MAC address register 0" hexmask.long 0x8 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0xC "V4PMAR1,VSI 4 primary MAC address register 1" hexmask.long.word 0xC 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" group.long 0x4140++0x3 line.long 0x0 "V5AMQR,VSI 5 access management qualifier register" hexmask.long.byte 0x0 20.--23. 1. "AWQOS,Address Write QoS" hexmask.long.byte 0x0 16.--19. 1. "ARQOS,Address Read QoS" rgroup.long 0x4144++0x3 line.long 0x0 "V5FAUXR,VF 5 function auxiliary register" hexmask.long.byte 0x0 0.--3. 1. "FAUX,Function Auxiliary Information" group.long 0x4148++0xF line.long 0x0 "V5BLPR0,VSI 5 boot loader parameter register 0" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x4 "V5BLPR1,VSI 5 boot loader parameter register 1" hexmask.long 0x4 0.--31. 1. "PARAM_VAL,Boot loader parameter value." line.long 0x8 "V5PMAR0,VSI 5 primary MAC address register 0" hexmask.long 0x8 0.--31. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" line.long 0xC "V5PMAR1,VSI 5 primary MAC address register 1" hexmask.long.word 0xC 0.--15. 1. "MAC_ADDR,MAC address This field is defined in network byte order (big-endian)" tree.end tree "NETC_PCI_PF" tree "EMDIO0_PCI_HDR_TYPE0" base ad:0x4CB00000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" bitfld.word 0x0 1. "MEM_ACCESS,Controls a device's response to memory space accesses. 0 Disabled 1 Enabled" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the device may contain multiple functions but not necessarily" "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.long 0x10++0x17 line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported Not supported. Hardwired to b0." "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.word 0x90++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Indicates the PM states within which the function is capable of sending PME message" bitfld.word 0x2 0.--2. "VERSION,Version ENETC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x94++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when NETC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by NETC) 10b = D2 (not supported by NETC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x97++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.word 0x9C++0x3 line.word 0x0 "PCI_CFC_EA_CAP_LIST,PCI EA capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the Enhanced Allocation (EA) Capability structure. Hardwired to 14h." line.word 0x2 "PCI_CFC_EA_CAP,PCI EA capabilities register" hexmask.word.byte 0x2 0.--5. 1. "NUM_ENTRIES,Number of entries Number of entries following the first DW of the capability." rgroup.long 0xA0++0x1F line.long 0x0 "PCI_CFC_EA_PE0_FMT,PCI EA per-entry 0 format register" bitfld.long 0x0 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x0 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x0 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x0 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x0 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_EA_PE0_BASE,PCI EA per-entry 0 base register" hexmask.long 0x4 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x4 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x8 "PCI_CFC_EA_PE0_MAXOFF,PCI EA per-entry 0 max offset register" hexmask.long 0x8 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x8 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0xC "PCI_CFC_EA_PE0_EXT_BASE,PCI EA per-entry 0 extended base register" hexmask.long 0xC 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x10 "PCI_CFC_EA_PE1_FMT,PCI EA per-entry 1 format register" bitfld.long 0x10 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x10 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x10 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x10 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x10 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x10 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x14 "PCI_CFC_EA_PE1_BASE,PCI EA per-entry 1 base register" hexmask.long 0x14 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x14 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x18 "PCI_CFC_EA_PE1_MAXOFF,PCI EA per-entry 1 max offset register" hexmask.long 0x18 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x18 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x1C "PCI_CFC_EA_PE1_EXT_BASE,PCI EA per-entry 1 extended base register" hexmask.long 0x1C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" eventfld.long 0x0 21. "ACS_VIOLATION_STAT,ACS violation status Set to indicate an ACS violation such as an access from a disallowed source" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree "ENETC0_PCI_HDR_TYPE0" base ad:0x4CA00000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" bitfld.word 0x0 1. "MEM_ACCESS,Controls a device's response to memory space accesses. 0 Disabled 1 Enabled" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the device may contain multiple functions but not necessarily" "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.long 0x10++0x17 line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported Not supported. Hardwired to b0." "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.word 0x90++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Indicates the PM states within which the function is capable of sending PME message" bitfld.word 0x2 0.--2. "VERSION,Version ENETC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x94++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" eventfld.word 0x0 15. "PME_STATUS,PME status This bit is set to 1b when the function detects a Wake-on-LAN event independent of the state of the PME_EN bit" "0,1" bitfld.word 0x0 8. "PME_EN,PME enable Enable function to generate PM_PME messages to Root Complex Event Collector." "0,1" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when NETC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" newline bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by NETC) 10b = D2 (not supported by NETC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x97++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.word 0x9C++0x3 line.word 0x0 "PCI_CFC_EA_CAP_LIST,PCI EA capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the Enhanced Allocation (EA) Capability structure. Hardwired to 14h." line.word 0x2 "PCI_CFC_EA_CAP,PCI EA capabilities register" hexmask.word.byte 0x2 0.--5. 1. "NUM_ENTRIES,Number of entries Number of entries following the first DW of the capability." rgroup.long 0xA0++0x2F line.long 0x0 "PCI_CFC_EA_PE0_FMT,PCI EA per-entry 0 format register" bitfld.long 0x0 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x0 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x0 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x0 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x0 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_EA_PE0_BASE,PCI EA per-entry 0 base register" hexmask.long 0x4 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x4 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x8 "PCI_CFC_EA_PE0_MAXOFF,PCI EA per-entry 0 max offset register" hexmask.long 0x8 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x8 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0xC "PCI_CFC_EA_PE0_EXT_BASE,PCI EA per-entry 0 extended base register" hexmask.long 0xC 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x10 "PCI_CFC_EA_PE1_FMT,PCI EA per-entry 1 format register" bitfld.long 0x10 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x10 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x10 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x10 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x10 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x10 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x14 "PCI_CFC_EA_PE1_BASE,PCI EA per-entry 1 base register" hexmask.long 0x14 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x14 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x18 "PCI_CFC_EA_PE1_MAXOFF,PCI EA per-entry 1 max offset register" hexmask.long 0x18 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x18 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x1C "PCI_CFC_EA_PE1_EXT_BASE,PCI EA per-entry 1 extended base register" hexmask.long 0x1C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x20 "PCI_CFC_EA_PE2_FMT,PCI EA per-entry 2 format register" bitfld.long 0x20 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x20 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x20 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x20 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x20 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x20 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x24 "PCI_CFC_EA_PE2_BASE,PCI EA per-entry 2 base register" hexmask.long 0x24 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x24 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x28 "PCI_CFC_EA_PE2_MAXOFF,PCI EA per-entry 2 max offset register" hexmask.long 0x28 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x28 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x2C "PCI_CFC_EA_PE2_EXT_BASE,PCI EA per-entry 2 extended base register" hexmask.long 0x2C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" eventfld.long 0x0 21. "ACS_VIOLATION_STAT,ACS violation status Set to indicate an ACS violation such as an access from a disallowed source" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" rgroup.long 0x150++0x7 line.long 0x0 "PCIE_CFC_SRIOV_CAP_HDR,PCIe SR-IOV capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 0010h." line.long 0x4 "PCIE_CFC_SRIOV_CAP,PCIe SR-IOV capability register" hexmask.long.word 0x4 21.--31. 1. "VF_MIGRATION_ING_MSG_NUM,VF migration interrupt message number Migration is supported only with MR-IOV." bitfld.long 0x4 1. "ARI_CAP_HIER_PRSV,ARI capable hierarchy preserved ARI is not supported by Integrated End Points" "0,1" bitfld.long 0x4 0. "VF_MIGRATION_CAP,VF migration capable Migration is supported only with MR-IOV." "0,1" group.word 0x158++0x1 line.word 0x0 "PCIE_CFC_SRIOV_CTL,PCIe SR-IOV control register" hexmask.word.byte 0x0 11.--15. 1. "PME_SUPPORT,PME support Wake-on-LAN events not supported by ENETC VFs. Hardwired to 00000b." rbitfld.word 0x0 10. "D2_SUPPORT,PCI-PM D2 support Not supported by ENETC. Hardwired to 0b." "0,1" rbitfld.word 0x0 4. "ARI_CAP_HIERARCHY,ARI capable hierarchy ARI is not supported by Integrated End Points" "0,1" newline bitfld.word 0x0 3. "VF_MSE,Memory Space Enable for Virtual Functions When VF Enable is Set VF memory space will respond only when VF MSE is Set" "0,1" rbitfld.word 0x0 2. "VF_MIGRATION_INT_ENABLE,VF migration interrupt enable Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" rbitfld.word 0x0 1. "VF_MIGRATION_ENABLE,VF migration enable Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" newline bitfld.word 0x0 0. "VF_ENABLE,VF enable 0 Disabled 1 Enabled" "0,1" rgroup.word 0x15A++0x5 line.word 0x0 "PCIE_CFC_SRIOV_STAT,PCIe SR-IOV status register" bitfld.word 0x0 0. "VF_MIGRATION_STATUS,VF migration status Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" line.word 0x2 "PCIE_CFC_SRIOV_INIT_VFS,PCIe SR-IOV initial VFs register" hexmask.word 0x2 0.--15. 1. "INITIAL_VFS,Initial VFs Number of VFs that are initially associated with the PF." line.word 0x4 "PCIE_CFC_SRIOV_TOTAL_VFS,PCIe SR-IOV total VFs register" hexmask.word 0x4 0.--15. 1. "TOTAL_VFS,Total VFs Maximum number of VFs that could be associated with the PF." group.word 0x160++0x1 line.word 0x0 "PCIE_CFC_SRIOV_NUM_VFS,PCIe SR-IOV num VFs register" hexmask.word 0x0 0.--15. 1. "NUM_VFS,Number of VFs Controls the number of VFs that are visible" rgroup.word 0x162++0x5 line.word 0x0 "PCIE_CFC_SRIOV_FUNC_DEP_LIST,PCIe SR-IOV function dependency list register" hexmask.word 0x0 0.--15. 1. "FUNC_DEP_LIST,Function dependency list The Function Dependency Link contains the RID of the PF implementing this Capability structure" line.word 0x2 "PCIE_CFC_SRIOV_FIRST_VF_OFF,PCIe SR-IOV first VF offset register" hexmask.word 0x2 0.--15. 1. "FIRST_VF_OFFSET,First VF offset First VF Offset is a constant and defines the Routing ID offset of the first VF that is associated with the PF that contains this Capability structure" line.word 0x4 "PCIE_CFC_SRIOV_VF_STRIDE,PCIe SR-IOV VF stride register" hexmask.word 0x4 0.--15. 1. "VF_STRIDE,VF stride VF Stride defines the Routing ID offset from one VF to the next one for all VFs associated with the PF that contains this Capability structure" rgroup.word 0x16A++0x1 line.word 0x0 "PCIE_CFC_SRIOV_VF_DEV_ID,PCIe SR-IOV VF device ID register" hexmask.word 0x0 0.--15. 1. "VF_DEVICE_ID,VF device ID This field contains the Device ID that should be presented for every VF to the SI." rgroup.long 0x16C++0x7 line.long 0x0 "PCIE_CFC_SRIOV_SUP_PAGE_SIZES,PCIe SR-IOV supported page sizes ID register" hexmask.long 0x0 0.--31. 1. "SUP_PAGE_SIZES,Supported page sizes The field indicates all the page sizes supported by the PF and as required by the SR-IOV specification ENETC supports 4 KB 8 KB and 64 KB page sizes" line.long 0x4 "PCIE_CFC_SRIOV_SYS_PAGE_SIZE,PCIe SR-IOV system page size ID register" hexmask.long 0x4 0.--31. 1. "SYS_PAGE_SIZE,System page size This field defines the page size the system will use to map the VFs' memory addresses" repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x174)++0x3 line.long 0x0 "PCIE_CFC_VF_BAR[$1],PCIe SR-IOV VF base address register a" hexmask.long 0x0 4.--31. 1. "ADDR,Address space (low register for 64-bit BARs). Not supported hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,BARs used. This register is hardwired to 0h." "0,1" repeat.end rgroup.long 0x18C++0x3 line.long 0x0 "PCIE_CFC_SRIOV_VF_MIG_STATE_ARR_OFF,PCIe SR-IOV VF migration state array offset register" hexmask.long 0x0 0.--31. 1. "VF_MIG_STATE_ARR_OFF,VF migration state array offset VF migration not supported. Hardwired to all 0b's." tree.end tree "ENETC1_PCI_HDR_TYPE0" base ad:0x4CA40000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" bitfld.word 0x0 1. "MEM_ACCESS,Controls a device's response to memory space accesses. 0 Disabled 1 Enabled" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the device may contain multiple functions but not necessarily" "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.long 0x10++0x17 line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported Not supported. Hardwired to b0." "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.word 0x90++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Indicates the PM states within which the function is capable of sending PME message" bitfld.word 0x2 0.--2. "VERSION,Version ENETC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x94++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" eventfld.word 0x0 15. "PME_STATUS,PME status This bit is set to 1b when the function detects a Wake-on-LAN event independent of the state of the PME_EN bit" "0,1" bitfld.word 0x0 8. "PME_EN,PME enable Enable function to generate PM_PME messages to Root Complex Event Collector." "0,1" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when NETC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" newline bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by NETC) 10b = D2 (not supported by NETC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x97++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.word 0x9C++0x3 line.word 0x0 "PCI_CFC_EA_CAP_LIST,PCI EA capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the Enhanced Allocation (EA) Capability structure. Hardwired to 14h." line.word 0x2 "PCI_CFC_EA_CAP,PCI EA capabilities register" hexmask.word.byte 0x2 0.--5. 1. "NUM_ENTRIES,Number of entries Number of entries following the first DW of the capability." rgroup.long 0xA0++0x2F line.long 0x0 "PCI_CFC_EA_PE0_FMT,PCI EA per-entry 0 format register" bitfld.long 0x0 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x0 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x0 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x0 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x0 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_EA_PE0_BASE,PCI EA per-entry 0 base register" hexmask.long 0x4 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x4 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x8 "PCI_CFC_EA_PE0_MAXOFF,PCI EA per-entry 0 max offset register" hexmask.long 0x8 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x8 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0xC "PCI_CFC_EA_PE0_EXT_BASE,PCI EA per-entry 0 extended base register" hexmask.long 0xC 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x10 "PCI_CFC_EA_PE1_FMT,PCI EA per-entry 1 format register" bitfld.long 0x10 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x10 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x10 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x10 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x10 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x10 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x14 "PCI_CFC_EA_PE1_BASE,PCI EA per-entry 1 base register" hexmask.long 0x14 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x14 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x18 "PCI_CFC_EA_PE1_MAXOFF,PCI EA per-entry 1 max offset register" hexmask.long 0x18 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x18 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x1C "PCI_CFC_EA_PE1_EXT_BASE,PCI EA per-entry 1 extended base register" hexmask.long 0x1C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x20 "PCI_CFC_EA_PE2_FMT,PCI EA per-entry 2 format register" bitfld.long 0x20 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x20 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x20 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x20 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x20 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x20 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x24 "PCI_CFC_EA_PE2_BASE,PCI EA per-entry 2 base register" hexmask.long 0x24 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x24 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x28 "PCI_CFC_EA_PE2_MAXOFF,PCI EA per-entry 2 max offset register" hexmask.long 0x28 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x28 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x2C "PCI_CFC_EA_PE2_EXT_BASE,PCI EA per-entry 2 extended base register" hexmask.long 0x2C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" eventfld.long 0x0 21. "ACS_VIOLATION_STAT,ACS violation status Set to indicate an ACS violation such as an access from a disallowed source" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" rgroup.long 0x150++0x7 line.long 0x0 "PCIE_CFC_SRIOV_CAP_HDR,PCIe SR-IOV capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 0010h." line.long 0x4 "PCIE_CFC_SRIOV_CAP,PCIe SR-IOV capability register" hexmask.long.word 0x4 21.--31. 1. "VF_MIGRATION_ING_MSG_NUM,VF migration interrupt message number Migration is supported only with MR-IOV." bitfld.long 0x4 1. "ARI_CAP_HIER_PRSV,ARI capable hierarchy preserved ARI is not supported by Integrated End Points" "0,1" bitfld.long 0x4 0. "VF_MIGRATION_CAP,VF migration capable Migration is supported only with MR-IOV." "0,1" group.word 0x158++0x1 line.word 0x0 "PCIE_CFC_SRIOV_CTL,PCIe SR-IOV control register" hexmask.word.byte 0x0 11.--15. 1. "PME_SUPPORT,PME support Wake-on-LAN events not supported by ENETC VFs. Hardwired to 00000b." rbitfld.word 0x0 10. "D2_SUPPORT,PCI-PM D2 support Not supported by ENETC. Hardwired to 0b." "0,1" rbitfld.word 0x0 4. "ARI_CAP_HIERARCHY,ARI capable hierarchy ARI is not supported by Integrated End Points" "0,1" newline bitfld.word 0x0 3. "VF_MSE,Memory Space Enable for Virtual Functions When VF Enable is Set VF memory space will respond only when VF MSE is Set" "0,1" rbitfld.word 0x0 2. "VF_MIGRATION_INT_ENABLE,VF migration interrupt enable Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" rbitfld.word 0x0 1. "VF_MIGRATION_ENABLE,VF migration enable Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" newline bitfld.word 0x0 0. "VF_ENABLE,VF enable 0 Disabled 1 Enabled" "0,1" rgroup.word 0x15A++0x5 line.word 0x0 "PCIE_CFC_SRIOV_STAT,PCIe SR-IOV status register" bitfld.word 0x0 0. "VF_MIGRATION_STATUS,VF migration status Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" line.word 0x2 "PCIE_CFC_SRIOV_INIT_VFS,PCIe SR-IOV initial VFs register" hexmask.word 0x2 0.--15. 1. "INITIAL_VFS,Initial VFs Number of VFs that are initially associated with the PF." line.word 0x4 "PCIE_CFC_SRIOV_TOTAL_VFS,PCIe SR-IOV total VFs register" hexmask.word 0x4 0.--15. 1. "TOTAL_VFS,Total VFs Maximum number of VFs that could be associated with the PF." group.word 0x160++0x1 line.word 0x0 "PCIE_CFC_SRIOV_NUM_VFS,PCIe SR-IOV num VFs register" hexmask.word 0x0 0.--15. 1. "NUM_VFS,Number of VFs Controls the number of VFs that are visible" rgroup.word 0x162++0x5 line.word 0x0 "PCIE_CFC_SRIOV_FUNC_DEP_LIST,PCIe SR-IOV function dependency list register" hexmask.word 0x0 0.--15. 1. "FUNC_DEP_LIST,Function dependency list The Function Dependency Link contains the RID of the PF implementing this Capability structure" line.word 0x2 "PCIE_CFC_SRIOV_FIRST_VF_OFF,PCIe SR-IOV first VF offset register" hexmask.word 0x2 0.--15. 1. "FIRST_VF_OFFSET,First VF offset First VF Offset is a constant and defines the Routing ID offset of the first VF that is associated with the PF that contains this Capability structure" line.word 0x4 "PCIE_CFC_SRIOV_VF_STRIDE,PCIe SR-IOV VF stride register" hexmask.word 0x4 0.--15. 1. "VF_STRIDE,VF stride VF Stride defines the Routing ID offset from one VF to the next one for all VFs associated with the PF that contains this Capability structure" rgroup.word 0x16A++0x1 line.word 0x0 "PCIE_CFC_SRIOV_VF_DEV_ID,PCIe SR-IOV VF device ID register" hexmask.word 0x0 0.--15. 1. "VF_DEVICE_ID,VF device ID This field contains the Device ID that should be presented for every VF to the SI." rgroup.long 0x16C++0x7 line.long 0x0 "PCIE_CFC_SRIOV_SUP_PAGE_SIZES,PCIe SR-IOV supported page sizes ID register" hexmask.long 0x0 0.--31. 1. "SUP_PAGE_SIZES,Supported page sizes The field indicates all the page sizes supported by the PF and as required by the SR-IOV specification ENETC supports 4 KB 8 KB and 64 KB page sizes" line.long 0x4 "PCIE_CFC_SRIOV_SYS_PAGE_SIZE,PCIe SR-IOV system page size ID register" hexmask.long 0x4 0.--31. 1. "SYS_PAGE_SIZE,System page size This field defines the page size the system will use to map the VFs' memory addresses" repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x174)++0x3 line.long 0x0 "PCIE_CFC_VF_BAR[$1],PCIe SR-IOV VF base address register a" hexmask.long 0x0 4.--31. 1. "ADDR,Address space (low register for 64-bit BARs). Not supported hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,BARs used. This register is hardwired to 0h." "0,1" repeat.end rgroup.long 0x18C++0x3 line.long 0x0 "PCIE_CFC_SRIOV_VF_MIG_STATE_ARR_OFF,PCIe SR-IOV VF migration state array offset register" hexmask.long 0x0 0.--31. 1. "VF_MIG_STATE_ARR_OFF,VF migration state array offset VF migration not supported. Hardwired to all 0b's." tree.end tree "ENETC2_PCI_HDR_TYPE0" base ad:0x4CA80000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" bitfld.word 0x0 1. "MEM_ACCESS,Controls a device's response to memory space accesses. 0 Disabled 1 Enabled" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the device may contain multiple functions but not necessarily" "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.long 0x10++0x17 line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported Not supported. Hardwired to b0." "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.word 0x90++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Indicates the PM states within which the function is capable of sending PME message" bitfld.word 0x2 0.--2. "VERSION,Version ENETC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x94++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" eventfld.word 0x0 15. "PME_STATUS,PME status This bit is set to 1b when the function detects a Wake-on-LAN event independent of the state of the PME_EN bit" "0,1" bitfld.word 0x0 8. "PME_EN,PME enable Enable function to generate PM_PME messages to Root Complex Event Collector." "0,1" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when NETC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" newline bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by NETC) 10b = D2 (not supported by NETC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x97++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.word 0x9C++0x3 line.word 0x0 "PCI_CFC_EA_CAP_LIST,PCI EA capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the Enhanced Allocation (EA) Capability structure. Hardwired to 14h." line.word 0x2 "PCI_CFC_EA_CAP,PCI EA capabilities register" hexmask.word.byte 0x2 0.--5. 1. "NUM_ENTRIES,Number of entries Number of entries following the first DW of the capability." rgroup.long 0xA0++0x2F line.long 0x0 "PCI_CFC_EA_PE0_FMT,PCI EA per-entry 0 format register" bitfld.long 0x0 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x0 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x0 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x0 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x0 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_EA_PE0_BASE,PCI EA per-entry 0 base register" hexmask.long 0x4 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x4 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x8 "PCI_CFC_EA_PE0_MAXOFF,PCI EA per-entry 0 max offset register" hexmask.long 0x8 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x8 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0xC "PCI_CFC_EA_PE0_EXT_BASE,PCI EA per-entry 0 extended base register" hexmask.long 0xC 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x10 "PCI_CFC_EA_PE1_FMT,PCI EA per-entry 1 format register" bitfld.long 0x10 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x10 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x10 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x10 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x10 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x10 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x14 "PCI_CFC_EA_PE1_BASE,PCI EA per-entry 1 base register" hexmask.long 0x14 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x14 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x18 "PCI_CFC_EA_PE1_MAXOFF,PCI EA per-entry 1 max offset register" hexmask.long 0x18 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x18 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x1C "PCI_CFC_EA_PE1_EXT_BASE,PCI EA per-entry 1 extended base register" hexmask.long 0x1C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x20 "PCI_CFC_EA_PE2_FMT,PCI EA per-entry 2 format register" bitfld.long 0x20 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x20 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x20 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x20 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x20 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x20 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x24 "PCI_CFC_EA_PE2_BASE,PCI EA per-entry 2 base register" hexmask.long 0x24 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x24 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x28 "PCI_CFC_EA_PE2_MAXOFF,PCI EA per-entry 2 max offset register" hexmask.long 0x28 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x28 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x2C "PCI_CFC_EA_PE2_EXT_BASE,PCI EA per-entry 2 extended base register" hexmask.long 0x2C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" eventfld.long 0x0 21. "ACS_VIOLATION_STAT,ACS violation status Set to indicate an ACS violation such as an access from a disallowed source" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" rgroup.long 0x150++0x7 line.long 0x0 "PCIE_CFC_SRIOV_CAP_HDR,PCIe SR-IOV capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 0010h." line.long 0x4 "PCIE_CFC_SRIOV_CAP,PCIe SR-IOV capability register" hexmask.long.word 0x4 21.--31. 1. "VF_MIGRATION_ING_MSG_NUM,VF migration interrupt message number Migration is supported only with MR-IOV." bitfld.long 0x4 1. "ARI_CAP_HIER_PRSV,ARI capable hierarchy preserved ARI is not supported by Integrated End Points" "0,1" bitfld.long 0x4 0. "VF_MIGRATION_CAP,VF migration capable Migration is supported only with MR-IOV." "0,1" group.word 0x158++0x1 line.word 0x0 "PCIE_CFC_SRIOV_CTL,PCIe SR-IOV control register" hexmask.word.byte 0x0 11.--15. 1. "PME_SUPPORT,PME support Wake-on-LAN events not supported by ENETC VFs. Hardwired to 00000b." rbitfld.word 0x0 10. "D2_SUPPORT,PCI-PM D2 support Not supported by ENETC. Hardwired to 0b." "0,1" rbitfld.word 0x0 4. "ARI_CAP_HIERARCHY,ARI capable hierarchy ARI is not supported by Integrated End Points" "0,1" newline bitfld.word 0x0 3. "VF_MSE,Memory Space Enable for Virtual Functions When VF Enable is Set VF memory space will respond only when VF MSE is Set" "0,1" rbitfld.word 0x0 2. "VF_MIGRATION_INT_ENABLE,VF migration interrupt enable Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" rbitfld.word 0x0 1. "VF_MIGRATION_ENABLE,VF migration enable Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" newline bitfld.word 0x0 0. "VF_ENABLE,VF enable 0 Disabled 1 Enabled" "0,1" rgroup.word 0x15A++0x5 line.word 0x0 "PCIE_CFC_SRIOV_STAT,PCIe SR-IOV status register" bitfld.word 0x0 0. "VF_MIGRATION_STATUS,VF migration status Migration is supported only with MR-IOV. Hardwired to 0b." "0,1" line.word 0x2 "PCIE_CFC_SRIOV_INIT_VFS,PCIe SR-IOV initial VFs register" hexmask.word 0x2 0.--15. 1. "INITIAL_VFS,Initial VFs Number of VFs that are initially associated with the PF." line.word 0x4 "PCIE_CFC_SRIOV_TOTAL_VFS,PCIe SR-IOV total VFs register" hexmask.word 0x4 0.--15. 1. "TOTAL_VFS,Total VFs Maximum number of VFs that could be associated with the PF." group.word 0x160++0x1 line.word 0x0 "PCIE_CFC_SRIOV_NUM_VFS,PCIe SR-IOV num VFs register" hexmask.word 0x0 0.--15. 1. "NUM_VFS,Number of VFs Controls the number of VFs that are visible" rgroup.word 0x162++0x5 line.word 0x0 "PCIE_CFC_SRIOV_FUNC_DEP_LIST,PCIe SR-IOV function dependency list register" hexmask.word 0x0 0.--15. 1. "FUNC_DEP_LIST,Function dependency list The Function Dependency Link contains the RID of the PF implementing this Capability structure" line.word 0x2 "PCIE_CFC_SRIOV_FIRST_VF_OFF,PCIe SR-IOV first VF offset register" hexmask.word 0x2 0.--15. 1. "FIRST_VF_OFFSET,First VF offset First VF Offset is a constant and defines the Routing ID offset of the first VF that is associated with the PF that contains this Capability structure" line.word 0x4 "PCIE_CFC_SRIOV_VF_STRIDE,PCIe SR-IOV VF stride register" hexmask.word 0x4 0.--15. 1. "VF_STRIDE,VF stride VF Stride defines the Routing ID offset from one VF to the next one for all VFs associated with the PF that contains this Capability structure" rgroup.word 0x16A++0x1 line.word 0x0 "PCIE_CFC_SRIOV_VF_DEV_ID,PCIe SR-IOV VF device ID register" hexmask.word 0x0 0.--15. 1. "VF_DEVICE_ID,VF device ID This field contains the Device ID that should be presented for every VF to the SI." rgroup.long 0x16C++0x7 line.long 0x0 "PCIE_CFC_SRIOV_SUP_PAGE_SIZES,PCIe SR-IOV supported page sizes ID register" hexmask.long 0x0 0.--31. 1. "SUP_PAGE_SIZES,Supported page sizes The field indicates all the page sizes supported by the PF and as required by the SR-IOV specification ENETC supports 4 KB 8 KB and 64 KB page sizes" line.long 0x4 "PCIE_CFC_SRIOV_SYS_PAGE_SIZE,PCIe SR-IOV system page size ID register" hexmask.long 0x4 0.--31. 1. "SYS_PAGE_SIZE,System page size This field defines the page size the system will use to map the VFs' memory addresses" repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x174)++0x3 line.long 0x0 "PCIE_CFC_VF_BAR[$1],PCIe SR-IOV VF base address register a" hexmask.long 0x0 4.--31. 1. "ADDR,Address space (low register for 64-bit BARs). Not supported hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,BARs used. This register is hardwired to 0h." "0,1" repeat.end rgroup.long 0x18C++0x3 line.long 0x0 "PCIE_CFC_SRIOV_VF_MIG_STATE_ARR_OFF,PCIe SR-IOV VF migration state array offset register" hexmask.long 0x0 0.--31. 1. "VF_MIG_STATE_ARR_OFF,VF migration state array offset VF migration not supported. Hardwired to all 0b's." tree.end tree "TMR0_PCI_HDR_TYPE0" base ad:0x4CAC0000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field identifies the device ID of the device" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID This field identifies the manufacturer of the device." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" bitfld.word 0x0 1. "MEM_ACCESS,Controls a device's response to memory space accesses. 0 Disabled 1 Enabled" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code The Class Code register is read-only and is used to identify the generic function of the device and in some cases a specific register level programming interface" hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" group.byte 0xC++0x0 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" hexmask.byte 0x0 0.--7. 1. "CACHE_LINE_SIZE,Cache line size The Cache Line Size register is set by the system firmware or the operating system to system cache line size" rgroup.byte 0xE++0x0 line.byte 0x0 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x0 7. "MULT_FUNC_DEV,Multi-function device When set indicates that the device may contain multiple functions but not necessarily" "0,1" hexmask.byte 0x0 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" rgroup.long 0x10++0x17 line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" newline bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SUBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SUBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported Not supported. Hardwired to b0." "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.word 0x90++0x3 line.word 0x0 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI-PM Capability structure. Hardwired to 01h." line.word 0x2 "PCI_CFC_PCIPM_CAP,PCI PCI-PM capabilities register" hexmask.word.byte 0x2 11.--15. 1. "PME_SUPPORT,PME support Indicates the PM states within which the function is capable of sending PME message" bitfld.word 0x2 0.--2. "VERSION,Version ENETC complies with the PCI PM specification rev 1.2." "0,1,2,3,4,5,6,7" group.word 0x94++0x1 line.word 0x0 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM control and status register" rbitfld.word 0x0 3. "NO_SOFT_RST,No soft reset When set ('1') this bit indicates that when NETC transitions from D3hot to D0active because of modifying Power State bits in the PCI_CFC_PCIPM_CTL_STAT register no internal reset is issued and Configuration Context is preserved" "0,1" bitfld.word 0x0 0.--1. "PWR_STATE,Power state This field is used to set and report the power state of a function as follows: 00b = D0 01b = D1 (not supported by NETC) 10b = D2 (not supported by NETC) 11b = D3 If for any reason the operating system software attempts to put a.." "0,1,2,3" rgroup.byte 0x97++0x0 line.byte 0x0 "PCI_CFC_PCIPM_DATA,PCI PCI-PM capabilities data register" rgroup.word 0x9C++0x3 line.word 0x0 "PCI_CFC_EA_CAP_LIST,PCI EA capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the Enhanced Allocation (EA) Capability structure. Hardwired to 14h." line.word 0x2 "PCI_CFC_EA_CAP,PCI EA capabilities register" hexmask.word.byte 0x2 0.--5. 1. "NUM_ENTRIES,Number of entries Number of entries following the first DW of the capability." rgroup.long 0xA0++0x1F line.long 0x0 "PCI_CFC_EA_PE0_FMT,PCI EA per-entry 0 format register" bitfld.long 0x0 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x0 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x0 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x0 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x0 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_EA_PE0_BASE,PCI EA per-entry 0 base register" hexmask.long 0x4 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x4 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x8 "PCI_CFC_EA_PE0_MAXOFF,PCI EA per-entry 0 max offset register" hexmask.long 0x8 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x8 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0xC "PCI_CFC_EA_PE0_EXT_BASE,PCI EA per-entry 0 extended base register" hexmask.long 0xC 0.--31. 1. "BASE,Base DW high address of the start of the resource range" line.long 0x10 "PCI_CFC_EA_PE1_FMT,PCI EA per-entry 1 format register" bitfld.long 0x10 31. "ENABLE,Enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x10 30. "WRITABLE,Writable 1b indicates that the Base MaxOffset and Field Size fields for this entry are RW 0b indicates those fields are HWInit" "0,1" hexmask.long.byte 0x10 16.--23. 1. "SEC_PROP,Secondary properties Alternative property when system cannot use the primary property." newline hexmask.long.byte 0x10 8.--15. 1. "PRIM_PROP,Primary properties Value (h) Resource Definition 00 Memory Space Non-Prefetchable" hexmask.long.byte 0x10 4.--7. 1. "BEI,BAR equivalent indicator This field indicates the equivalent PCI BAR for this entry" bitfld.long 0x10 0.--2. "ENTRY_SIZE,Entry size Number of DWs following the initial DW in this entry" "0,1,2,3,4,5,6,7" line.long 0x14 "PCI_CFC_EA_PE1_BASE,PCI EA per-entry 1 base register" hexmask.long 0x14 2.--31. 1. "BASE,Base DW address of the start of the resource range" bitfld.long 0x14 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x18 "PCI_CFC_EA_PE1_MAXOFF,PCI EA per-entry 1 max offset register" hexmask.long 0x18 2.--31. 1. "MAX_OFFSET,Max offset The value in the Base field ([63:2]) plus the value in the MaxOffset field indicates the address of the last included DW of the resource range" bitfld.long 0x18 1. "S,Field size 0 32-bit 1 64-bit" "0,1" line.long 0x1C "PCI_CFC_EA_PE1_EXT_BASE,PCI EA per-entry 1 extended base register" hexmask.long 0x1C 0.--31. 1. "BASE,Base DW high address of the start of the resource range" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" eventfld.long 0x0 21. "ACS_VIOLATION_STAT,ACS violation status Set to indicate an ACS violation such as an access from a disallowed source" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree.end tree "NETC_PCI_VF" tree "NETC_VF1_PCI_HDR_TYPE0" base ad:0x4CA10000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field in all VFs returns FFFFh when read" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID Returns 0xFFFF for all VFs." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code Returns the same value as the PF." hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" rgroup.byte 0xC++0x3 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" line.byte 0x1 "PCI_CFH_LAT_TIMER,PCI latency timer register" line.byte 0x2 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x2 7. "MULT_FUNC_DEV,Multi-function device For VFs this field is not applicable and is hardwired to 0b." "0,1" hexmask.byte 0x2 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" line.byte 0x3 "PCI_CFH_BIST,PCI BIST register" rgroup.long 0x10++0x1B line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x18 "PCI_CFH_CARDBUS_CIS,PCI cardbus CIS register" hexmask.long 0x18 0.--31. 1. "CARDBUS_CIS_PTR,Not applicable. This register is hardwired to 0000_0000h." rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SYBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SYBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.long 0x30++0x3 line.long 0x0 "PCI_CFH_EXP_ROM_BA,PCI expansion ROM base address register" hexmask.long 0x0 0.--31. 1. "EXP_ROM_BA,Not applicable. This register is hardwired to 0000_0000h." rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported When set (b1) indicates support for the Completion Timeout Disable mechanism" "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree "NETC_VF2_PCI_HDR_TYPE0" base ad:0x4CA20000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field in all VFs returns FFFFh when read" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID Returns 0xFFFF for all VFs." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code Returns the same value as the PF." hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" rgroup.byte 0xC++0x3 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" line.byte 0x1 "PCI_CFH_LAT_TIMER,PCI latency timer register" line.byte 0x2 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x2 7. "MULT_FUNC_DEV,Multi-function device For VFs this field is not applicable and is hardwired to 0b." "0,1" hexmask.byte 0x2 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" line.byte 0x3 "PCI_CFH_BIST,PCI BIST register" rgroup.long 0x10++0x1B line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x18 "PCI_CFH_CARDBUS_CIS,PCI cardbus CIS register" hexmask.long 0x18 0.--31. 1. "CARDBUS_CIS_PTR,Not applicable. This register is hardwired to 0000_0000h." rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SYBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SYBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.long 0x30++0x3 line.long 0x0 "PCI_CFH_EXP_ROM_BA,PCI expansion ROM base address register" hexmask.long 0x0 0.--31. 1. "EXP_ROM_BA,Not applicable. This register is hardwired to 0000_0000h." rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported When set (b1) indicates support for the Completion Timeout Disable mechanism" "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree "NETC_VF3_PCI_HDR_TYPE0" base ad:0x4CA50000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field in all VFs returns FFFFh when read" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID Returns 0xFFFF for all VFs." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code Returns the same value as the PF." hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" rgroup.byte 0xC++0x3 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" line.byte 0x1 "PCI_CFH_LAT_TIMER,PCI latency timer register" line.byte 0x2 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x2 7. "MULT_FUNC_DEV,Multi-function device For VFs this field is not applicable and is hardwired to 0b." "0,1" hexmask.byte 0x2 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" line.byte 0x3 "PCI_CFH_BIST,PCI BIST register" rgroup.long 0x10++0x1B line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x18 "PCI_CFH_CARDBUS_CIS,PCI cardbus CIS register" hexmask.long 0x18 0.--31. 1. "CARDBUS_CIS_PTR,Not applicable. This register is hardwired to 0000_0000h." rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SYBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SYBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.long 0x30++0x3 line.long 0x0 "PCI_CFH_EXP_ROM_BA,PCI expansion ROM base address register" hexmask.long 0x0 0.--31. 1. "EXP_ROM_BA,Not applicable. This register is hardwired to 0000_0000h." rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported When set (b1) indicates support for the Completion Timeout Disable mechanism" "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree "NETC_VF4_PCI_HDR_TYPE0" base ad:0x4CA60000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field in all VFs returns FFFFh when read" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID Returns 0xFFFF for all VFs." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code Returns the same value as the PF." hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" rgroup.byte 0xC++0x3 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" line.byte 0x1 "PCI_CFH_LAT_TIMER,PCI latency timer register" line.byte 0x2 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x2 7. "MULT_FUNC_DEV,Multi-function device For VFs this field is not applicable and is hardwired to 0b." "0,1" hexmask.byte 0x2 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" line.byte 0x3 "PCI_CFH_BIST,PCI BIST register" rgroup.long 0x10++0x1B line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x18 "PCI_CFH_CARDBUS_CIS,PCI cardbus CIS register" hexmask.long 0x18 0.--31. 1. "CARDBUS_CIS_PTR,Not applicable. This register is hardwired to 0000_0000h." rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SYBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SYBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.long 0x30++0x3 line.long 0x0 "PCI_CFH_EXP_ROM_BA,PCI expansion ROM base address register" hexmask.long 0x0 0.--31. 1. "EXP_ROM_BA,Not applicable. This register is hardwired to 0000_0000h." rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported When set (b1) indicates support for the Completion Timeout Disable mechanism" "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree "NETC_VF5_PCI_HDR_TYPE0" base ad:0x4CA90000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field in all VFs returns FFFFh when read" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID Returns 0xFFFF for all VFs." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code Returns the same value as the PF." hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" rgroup.byte 0xC++0x3 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" line.byte 0x1 "PCI_CFH_LAT_TIMER,PCI latency timer register" line.byte 0x2 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x2 7. "MULT_FUNC_DEV,Multi-function device For VFs this field is not applicable and is hardwired to 0b." "0,1" hexmask.byte 0x2 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" line.byte 0x3 "PCI_CFH_BIST,PCI BIST register" rgroup.long 0x10++0x1B line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x18 "PCI_CFH_CARDBUS_CIS,PCI cardbus CIS register" hexmask.long 0x18 0.--31. 1. "CARDBUS_CIS_PTR,Not applicable. This register is hardwired to 0000_0000h." rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SYBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SYBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.long 0x30++0x3 line.long 0x0 "PCI_CFH_EXP_ROM_BA,PCI expansion ROM base address register" hexmask.long 0x0 0.--31. 1. "EXP_ROM_BA,Not applicable. This register is hardwired to 0000_0000h." rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported When set (b1) indicates support for the Completion Timeout Disable mechanism" "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree "NETC_VF6_PCI_HDR_TYPE0" base ad:0x4CAA0000 rgroup.long 0x0++0x3 line.long 0x0 "PCI_CFH_DID_VID,PCI device ID and vendor ID register" hexmask.long.word 0x0 16.--31. 1. "DEVICE_ID,Device ID This field in all VFs returns FFFFh when read" hexmask.long.word 0x0 0.--15. 1. "VENDOR_ID,Vendor ID Returns 0xFFFF for all VFs." group.word 0x4++0x1 line.word 0x0 "PCI_CFH_CMD,PCI command register" bitfld.word 0x0 2. "BUS_MASTER_EN,Bus master enable Controls the ability of a PCI Express Endpoint to issue Memory and I/O Read/Write Requests" "0,1" rgroup.word 0x6++0x1 line.word 0x0 "PCI_CFH_STAT,PCI status register" bitfld.word 0x0 4. "CAP_LIST,Capabilities List Indicates the presence of an Extended Capability list item" "0,1" rgroup.long 0x8++0x3 line.long 0x0 "PCI_CFH_REVID_CLASSCODE,PCI revision ID and classcode register" hexmask.long.tbyte 0x0 8.--31. 1. "CLASS_CODE,Class code Returns the same value as the PF." hexmask.long.byte 0x0 0.--7. 1. "REV_ID,Revision ID This register specifies a device specific revision identifier and is a vendor defined extension to the Device ID" rgroup.byte 0xC++0x3 line.byte 0x0 "PCI_CFH_CL_SIZE,PCI cache line size register" line.byte 0x1 "PCI_CFH_LAT_TIMER,PCI latency timer register" line.byte 0x2 "PCI_CFH_HDR_TYPE,PCI header type register" bitfld.byte 0x2 7. "MULT_FUNC_DEV,Multi-function device For VFs this field is not applicable and is hardwired to 0b." "0,1" hexmask.byte 0x2 0.--6. 1. "HDR_TYPE,Header type This field identifies the layout of the second part of the predefined header (beginning at byte 10h in Configuration Space)" line.byte 0x3 "PCI_CFH_BIST,PCI BIST register" rgroup.long 0x10++0x1B line.long 0x0 "PCI_CFH_BAR0,PCI base address register 0" hexmask.long 0x0 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x0 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x0 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x0 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x4 "PCI_CFH_BAR1,PCI base address register 1" hexmask.long 0x4 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x4 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x4 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x4 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x8 "PCI_CFH_BAR2,PCI base address register 2" hexmask.long 0x8 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x8 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x8 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x8 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0xC "PCI_CFH_BAR3,PCI base address register 3" hexmask.long 0xC 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0xC 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0xC 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0xC 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x10 "PCI_CFH_BAR4,PCI base address register 4" hexmask.long 0x10 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x10 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x10 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x10 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x14 "PCI_CFH_BAR5,PCI base address register 5" hexmask.long 0x14 4.--31. 1. "ADDR,EA BARs used. This register is hardwired to 000000h." bitfld.long 0x14 3. "PF_MEM,EA BARs used. This register is hardwired to 0h." "0,1" bitfld.long 0x14 1.--2. "MEM_TYPE,EA BARs used. This register is hardwired to 0h." "0,1,2,3" bitfld.long 0x14 0. "MEM_IO_IND,EA BARs used. This register is hardwired to 0h." "0,1" line.long 0x18 "PCI_CFH_CARDBUS_CIS,PCI cardbus CIS register" hexmask.long 0x18 0.--31. 1. "CARDBUS_CIS_PTR,Not applicable. This register is hardwired to 0000_0000h." rgroup.word 0x2C++0x3 line.word 0x0 "PCI_CFH_SUBSYS_VID,PCI subsystem vendor ID register" hexmask.word 0x0 0.--15. 1. "SYBSYSTEM_VENDOR_ID,This Read Only field identifies the manufacturer of the subsystem" line.word 0x2 "PCI_CFH_SUBSYS_ID,PCI subsystem ID register" hexmask.word 0x2 0.--15. 1. "SYBSYSTEM_ID,This Read Only field identifies the particular subsystem" rgroup.long 0x30++0x3 line.long 0x0 "PCI_CFH_EXP_ROM_BA,PCI expansion ROM base address register" hexmask.long 0x0 0.--31. 1. "EXP_ROM_BA,Not applicable. This register is hardwired to 0000_0000h." rgroup.byte 0x34++0x0 line.byte 0x0 "PCI_CFH_CAP_PTR,PCI capabilities pointer register" hexmask.byte 0x0 0.--7. 1. "CAP_PTR,This register is used to point to a linked list of new capabilities implemented by this device" rgroup.word 0x40++0x3 line.word 0x0 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the PCI Express Capability structure. Hardwired to 10h." line.word 0x2 "PCI_CFC_PCIE_CAP,PCI PCIe capabilities register" hexmask.word.byte 0x2 9.--13. 1. "INT_MSG_NUM,Interrupt message number This field indicates which MSI/MSI-X vector is used for the interrupt message generated in association with any of the status bits of this capability structure" hexmask.word.byte 0x2 4.--7. 1. "DEV_PORT_TYPE,Device/Port type Indicates the specific type of this PCI Express Function" hexmask.word.byte 0x2 0.--3. 1. "CAP_VER,Capability Version Indicates PCI-SIG defined PCI Express Capability structure version number" rgroup.long 0x44++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe device capabilities register" bitfld.long 0x0 28. "FLR_CAP,Function level reset capability A value of 1b indicates the function supports the optional Function Level Reset (FLR) mechanism" "0,1" group.word 0x48++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe device control register" bitfld.word 0x0 15. "INIT_FLR,Initiate function level reset A write of b1 initiates Function Level Reset (FLR)" "0,1" rgroup.word 0x4A++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe device status register" bitfld.word 0x0 5. "TRANS_PEND,Transaction pending If set indicates that the Function has outstanding transactions on its external master interface" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe device capabilities 2 register" bitfld.long 0x0 4. "CMPL_TO_DIS_SUPP,Completion Timeout Disable Supported When set (b1) indicates support for the Completion Timeout Disable mechanism" "0,1" hexmask.long.byte 0x0 0.--3. 1. "CMPL_TO_RNG_SUPP,Completion Timeout Ranges Supported Completion Timeout programming not supported the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x68++0x1 line.word 0x0 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe device control 2 register" bitfld.word 0x0 4. "CMPL_TO_EN,Completion Timeout Enable Not supported. Hardwired to b0." "0,1" hexmask.word.byte 0x0 0.--3. 1. "CMPL_TO_VALUE,Completion Timeout Value Completion Timeout programming not supported - the Function assumes a timeout value in the range 50 us to 50 ms" rgroup.word 0x80++0x1 line.word 0x0 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X capabilities list register" hexmask.word.byte 0x0 8.--15. 1. "NEXT_CAP_PTR,This field contains the offset to the next PCI Capability structure or 00h if no other items exist in the linked list of capabilities" hexmask.word.byte 0x0 0.--7. 1. "CAP_ID,Indicates the MSI-X Capability structure. Hardwired to 11h." group.word 0x82++0x1 line.word 0x0 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X message control register" bitfld.word 0x0 15. "MSIX_EN,MSI-X enable If set the function is permitted to use MSI-X to request service" "0,1" bitfld.word 0x0 14. "FUNC_MASK,Function mask If 1 all of the vectors associated with the function are masked regardless of their per-vector Mask bit states" "0,1" hexmask.word 0x0 0.--10. 1. "TABLE_SIZE,Table size System software reads this field to determine the MSI-X Table Size N which is encoded as N-1" rgroup.long 0x84++0x7 line.long 0x0 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X table offset/BIR register" hexmask.long 0x0 3.--31. 1. "TABLE_OFFSET,Table Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X Table" bitfld.long 0x0 0.--2. "TABLE_BIR,Table BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X Table into Memory Space" "0,1,2,3,4,5,6,7" line.long 0x4 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA offset/BIR register" hexmask.long 0x4 3.--31. 1. "PBA_OFFSET,PBA Offset Used as an offset from the address contained by one of the function's Base Address registers to point to the base of the MSI-X PBA" bitfld.long 0x4 0.--2. "PBA_BIR,PBA BIR Indicates which entry in the Enhanced Allocation capability with a matching BEI is used to map the Function's MSI-X PBA into Memory Space" "0,1,2,3,4,5,6,7" rgroup.long 0x100++0x3 line.long 0x0 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER extended capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the AER Extended Capability is 0001h." group.long 0x104++0x13 line.long 0x0 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER uncorrectable error status register" eventfld.long 0x0 22. "UCORR_INT_ERR,Uncorrectable internal error Set to indicate some uncorrectable internal error such as a multi-bit error in an internal memory has occurred" "0,1" line.long 0x4 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER uncorrectable error mask register" bitfld.long 0x4 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0x8 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER uncorrectable error severity register" bitfld.long 0x8 22. "UCORR_INT_SEV,Uncorrectable internal severity 0 Non-fatal 1 Fatal This bit is 'sticky' and will be preserved across function level resets" "0,1" line.long 0xC "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER correctable error status register" eventfld.long 0xC 14. "CORR_INT_ERR,Correctable internal error Set to indicate some correctable internal error has occurred such as a single bit error in an internal memory" "0,1" line.long 0x10 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER correctable error mask register" bitfld.long 0x10 14. "CORR_INT_MASK,Correctable internal error mask 0 Not masked 1 Masked This bit is 'sticky' and will be preserved across function level resets" "0,1" rgroup.long 0x118++0x3 line.long 0x0 "PCIE_CFC_AER_CAP_CTL,PCIe AER capabilities and control register" hexmask.long.byte 0x0 0.--4. 1. "FIRST_ERR_PTR,First error pointer The First Error Pointer is a field that identifies the bit position of the first error reported in the Uncorrectable Error Status register" rgroup.long 0x130++0x3 line.long 0x0 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the ACS Extended Capability is 000Dh." rgroup.word 0x134++0x3 line.word 0x0 "PCIE_CFC_ACS_CAP,PCIe ACS capability register" bitfld.word 0x0 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T) Set to indicate that the Function supports direct translated peer-to-peer" "0,1" bitfld.word 0x0 2. "ACS_P2P_REQ_REDIR,ACS P2P request dedirect (R) Set to indicate that the Function supports peer-to-peer request redirection" "0,1" bitfld.word 0x0 1. "ACS_TRANS_BLOCK,ACS translation blocking (B) Set to indicate that the Function supports Translation Blocking." "0,1" line.word 0x2 "PCIE_CFC_ACS_CTL,PCIe ACS control register" bitfld.word 0x2 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T) When set the Function determines how to direct peer-to-peer requests based on ATS Ignored if ACS Translation Blocking Enable is set" "0,1" bitfld.word 0x2 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request dedirect enable (R) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" bitfld.word 0x2 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B) When set the Function directs peer-to-peer requests to the SoC interconnect" "0,1" rgroup.long 0x140++0xB line.long 0x0 "PCIE_CFC_RTR_CAP_HDR,PCIe readiness time reporting capability header" hexmask.long.word 0x0 20.--31. 1. "NEXT_CAP_OFF,Next capability offset This field contains the offset to the next PCI Express Capability structure or 000h if no other items exist in the linked list of capabilities" hexmask.long.byte 0x0 16.--19. 1. "CAP_VER,Capability version Must be 1h for this version of the specification." hexmask.long.word 0x0 0.--15. 1. "PCIE_EXT_CAP_ID,The Extended Capability ID for the Readiness Time Reporting Extended Capability is 0022h." line.long 0x4 "PCIE_CFC_RTR_RTR1,PCIe RTR readiness time reporting 1 register" bitfld.long 0x4 31. "VALID,Valid" "0,1" hexmask.long.word 0x4 0.--11. 1. "RESET_TIME,Reset Time" line.long 0x8 "PCIE_CFC_RTR_RTR2,PCIe RTR readiness time reporting 2 register" hexmask.long.word 0x8 12.--23. 1. "D3HOT_D0_TIME,D3 hot to D0 time" hexmask.long.word 0x8 0.--11. 1. "FLR_TIME,FLR Time" tree.end tree.end tree "NETC_PF" tree "ENETC0_BASE" base ad:0x4CC10000 rgroup.long 0x0++0xB line.long 0x0 "ECAPR0,ENETC capability register 0" bitfld.long 0x0 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x0 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 10. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" bitfld.long 0x0 9. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" bitfld.long 0x0 5. "TSD,Support for time specific departure. 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" line.long 0x4 "ECAPR1,ENETC capability register 1" bitfld.long 0x4 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0x4 24.--27. 1. "NUM_VSI,Indicates the number of VSI supported" newline hexmask.long.word 0x4 12.--22. 1. "NUM_MSIX,Number of MSI-X" bitfld.long 0x4 10.--11. "NUM_UCH,Number of uni-cast hash entry (1bit/entry) per SI for L2 MAC Filtering 00 64 unicast bins 01 128 unicast bins 10 256 unicast bins 11 512 unicast bins" "0,1,2,3" newline bitfld.long 0x4 8.--9. "NUM_MCH,Number of multi-cast hash entry (1bit/entry) per SI for L2 MAC Filtering 00 64 multi-cast bins 01 128 multi-cast bins 10 256 multi-cast bins 11 512 multi-cast bins" "0,1,2,3" bitfld.long 0x4 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" line.long 0x8 "ECAPR2,ENETC capability register 2" hexmask.long.word 0x8 16.--25. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings assigned to ENETC Range: 0..256" hexmask.long.word 0x8 0.--9. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings assigned to ENETC Range: 0..256" group.long 0x10++0x3 line.long 0x0 "PMR,Port mode register" bitfld.long 0x0 18. "SI2EN,Enable station interface 2" "0,1" bitfld.long 0x0 17. "SI1EN,Enable station interface 1" "0,1" newline bitfld.long 0x0 16. "SI0EN,Enable station interface 0" "0,1" group.long 0x80++0xB line.long 0x0 "PONVLANR,Port outer native VLAN register" bitfld.long 0x0 19. "VZE,0 do not use the port outer native VLAN VID when the VID in the packet's outer VLAN tag is zero 1 use the port outer native VLAN VID when the VID in the packet's outer VLAN tag is zero" "0,1" bitfld.long 0x0 18. "PNE,0 do not use the port outer native VLAN when outer VLAN tag is not present 1 use the port outer native VLAN when outer VLAN tag is not present" "0,1" newline bitfld.long 0x0 16.--17. "TPID,Identifies which known VLAN Ethertype is used 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE] 11 Custom VLAN as defined by CVLANR2[ETYPE]" "0,1,2,3" bitfld.long 0x0 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x0 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x0 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" line.long 0x4 "PINVLANR,Port inner native VLAN register" bitfld.long 0x4 19. "VZE,0 do not use the port inner native VLAN VID when the VID in the packet's inner VLAN tag is zero 1 use the port inner native VLAN VID when the VID in the packet's inner VLAN tag is zero" "0,1" bitfld.long 0x4 18. "PNE,0 do not use the port inner native VLAN when inner VLAN tag is not present 1 use the port inner native VLAN when inner VLAN tag is not present" "0,1" newline bitfld.long 0x4 16.--17. "TPID,Identifies which known VLAN Ethertype is used 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE] 11 Custom VLAN as defined by CVLANR2[ETYPE]" "0,1,2,3" bitfld.long 0x4 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x4 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x4 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" line.long 0x8 "PVCLCTR,Port VLAN classification control register" bitfld.long 0x8 9. "OAI,Outer as Inner: 0 Indicates that the Inner is not valid if only one tag is found 1 Indicates that the outer should be used as the Inner if only one tag is found" "0,1" group.long 0x9C++0x3 line.long 0x0 "PARCSCR,Parser checksum configuration register" bitfld.long 0x0 1. "L3CD,Layer 3 IPv4 Header checksum validation Disable." "0,1" bitfld.long 0x0 0. "L4CD,Layer 4 TCP and UDP checksum validation Disable." "0,1" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xA0)++0x3 line.long 0x0 "PARCECR[$1],Parser custom Ethertype i configuration register" hexmask.long.word 0x0 16.--31. 1. "ETYPE,ETYPE" bitfld.long 0x0 5. "EN,EN" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "CP,CP" repeat.end group.long 0x108++0x7 line.long 0x0 "PPAUONTR,Port pause ON threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Monitors the amount of data accumulated in the receive buffer and if this amount exceeds the Pause ON threshold (expressed in words) it then enters the 'Pause ON' state if Pause is enabled" line.long 0x4 "PPAUOFFTR,Port pause OFF threshold register" hexmask.long.tbyte 0x4 0.--23. 1. "THRESH,Monitors the amount of data accumulated in the receive buffer and if this amount goes below the Pause OFF threshold (expressed in words) it then enters the 'Pause OFF' state if Pause is enabled" rgroup.long 0x120++0xF line.long 0x0 "PRXMBER,Port receive memory buffer entitlement register" hexmask.long.tbyte 0x0 0.--23. 1. "AMOUNT,Receive memory buffer entitlement in words This receive Memory Buffer Entitlement is used in determining smart drop for ingress congestion control" line.long 0x4 "PRXMBLR,Port receive memory buffer limit register" hexmask.long.tbyte 0x4 0.--23. 1. "LIMIT,Receive buffer memory limit in words" line.long 0x8 "PRXBCR,Port receive buffer count register" hexmask.long.tbyte 0x8 0.--23. 1. "COUNT,Current receive buffer usage count in words for this port." line.long 0xC "PRXBCHWMR,Port receive buffer count high watermark register" hexmask.long.tbyte 0xC 0.--23. 1. "WATERMARK,High watermark in words for receive buffer usage since the last read of this register" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x4CC10140 ad:0x4CC10150 ad:0x4CC10160 ad:0x4CC10170) tree "PICDRaDCR[$1]" base $2 rgroup.long ($2)++0x3 line.long 0x0 "PICDRDCR,Port ingress congestion DRindex discard count register" hexmask.long 0x0 0.--31. 1. "COUNT,Number of frames discarded by Ingress Congestion Manager for this port and for each discard resilience (DR) value" rgroup.long ($2+0x8)++0x3 line.long 0x0 "PICDRDCRRR,Port ingress congestion DRindex discard count read-reset register" hexmask.long 0x0 0.--31. 1. "COUNT,Reading this register provides the count of all frames discarded at this DR level since the last reset of this count and also resets the count after the read" tree.end repeat.end base ad:0x4CC10000 group.long 0x180++0x3 line.long 0x0 "PICPDSR,Port ingress congestion priority discard status register" eventfld.long 0x0 28. "DR3_P1DS,DR3 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 24. "DR3_P0DS,DR3 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 20. "DR2_P1DS,DR2 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 16. "DR2_P0DS,DR2 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 12. "DR1_P1DS,DR1 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 8. "DR1_P0DS,DR1 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 4. "DR0_P1DS,DR0 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 0. "DR0_P0DS,DR0 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" group.long 0x200++0x7 line.long 0x0 "PSIPMMR,Port station interface promiscuous MAC mode register" bitfld.long 0x0 18. "SI2_MAC_MP,SI 2 MAC multicast promiscuous" "0,1" bitfld.long 0x0 17. "SI1_MAC_MP,SI 1 MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "0,1" bitfld.long 0x0 2. "SI2_MAC_UP,SI 2 MAC unicast promiscuous" "0,1" newline bitfld.long 0x0 1. "SI1_MAC_UP,SI 1 MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "0,1" line.long 0x4 "PSIPVMR,Port station interface promiscuous VLAN mode register" bitfld.long 0x4 18. "SI2_VLAN_UTA,SI 2 Untagged frames (no VLAN) accepted" "0,1" bitfld.long 0x4 17. "SI1_VLAN_UTA,SI 1 Untagged frames (no VLAN) accepted" "0,1" newline bitfld.long 0x4 16. "SI0_VLAN_UTA,SI 0 Untagged frames (no VLAN) accepted" "0,1" bitfld.long 0x4 2. "SI2_VLAN_P,SI 2 VLAN promiscuous. If set SI 2 qualifies for reception of all VLAN tags." "0,1" newline bitfld.long 0x4 1. "SI1_VLAN_P,SI 1 VLAN promiscuous. If set SI 1 qualifies for reception of all VLAN tags." "0,1" bitfld.long 0x4 0. "SI0_VLAN_P,SI 0 VLAN promiscuous. If set SI 0 qualifies for reception of all VLAN tags." "0,1" rgroup.long 0x208++0x7 line.long 0x0 "PBFDSIR,Port broadcast frames dropped due to MAC filtering register" hexmask.long 0x0 0.--31. 1. "FRAME_DROP,MAC filter broadcast frame drop counter bits 31-0" line.long 0x4 "PFDMSAPR,Port frame drop MAC source address pruning register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,MAC source address pruning frame drop counter bits 31-0" rgroup.long 0x240++0x3 line.long 0x0 "PRSSCAPR,Port RSS capability register" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS) bins per SI" group.long 0x244++0x3 line.long 0x0 "PRSSCR,Port RSS Control Register" bitfld.long 0x0 5. "IP6_DIS,IPv6 packet disable." "0,1" bitfld.long 0x0 4. "IP6UDP_DIS,IPv6 with UDP disable." "0,1" newline bitfld.long 0x0 3. "IP4UDP_DIS,IPv4 with UDP disable." "0,1" bitfld.long 0x0 2. "IP6TCP_DIS,IPv6 with TCP packet disable." "0,1" newline bitfld.long 0x0 1. "IP4_DIS,IPv4 packet disable." "0,1" bitfld.long 0x0 0. "IP4TCP_DIS,IPv4 with TCP packet disable." "0,1" group.long 0x250++0x27 line.long 0x0 "PRSSKR0,Port RSS key register 0" hexmask.long 0x0 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x4 "PRSSKR1,Port RSS key register 1" hexmask.long 0x4 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x8 "PRSSKR2,Port RSS key register 2" hexmask.long 0x8 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0xC "PRSSKR3,Port RSS key register 3" hexmask.long 0xC 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x10 "PRSSKR4,Port RSS key register 4" hexmask.long 0x10 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x14 "PRSSKR5,Port RSS key register 5" hexmask.long 0x14 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x18 "PRSSKR6,Port RSS key register 6" hexmask.long 0x18 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x1C "PRSSKR7,Port RSS key register 7" hexmask.long 0x1C 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x20 "PRSSKR8,Port RSS key register 8" hexmask.long 0x20 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x24 "PRSSKR9,Port RSS key register 9" hexmask.long 0x24 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" rgroup.long 0x280++0xB line.long 0x0 "PSIMAFCAPR,Port station interface MAC address filtering capability register" hexmask.long.word 0x0 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port." line.long 0x4 "PUFDMFR,Port unicast frames dropped due to MAC filtering register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,MAC filter unicast frame drop counter bits 31-0" line.long 0x8 "PMFDMFR,Port multicast frames dropped due to MAC filtering register" hexmask.long 0x8 0.--31. 1. "FRAME_DROP,MAC filter multicast frame drop counter bits 31-0" rgroup.long 0x2C0++0x3 line.long 0x0 "PSIVLANFCAPR,Port station interface VLAN filtering capability register" hexmask.long.word 0x0 0.--11. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries per port. Range: 0..4K-1" group.long 0x2C4++0x3 line.long 0x0 "PSIVLANFMR,Port station interface VLAN filtering mode register" bitfld.long 0x0 0. "VS,VLAN tag select 0 Inner VLAN tag will be used for VLAN filtering 1 Outer VLAN tag will be used for VLAN filtering" "0,1" rgroup.long 0x2D0++0xB line.long 0x0 "PUFDVFR,Port unicast frames dropped VLAN filtering register" hexmask.long 0x0 0.--31. 1. "FRAME_DROP,VLAN filter unicast frame drop counter bits 31-0" line.long 0x4 "PMFDVFR,Port multicast frames dropped VLAN filtering register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,VLAN filter multicast frame drop counter bits 31-0" line.long 0x8 "PBFDVFR,Port broadcast frames dropped VLAN filtering register" hexmask.long 0x8 0.--31. 1. "FRAME_DROP,VLAN filter broadcast frame drop counter bits 31-0" group.long 0x340++0x3 line.long 0x0 "PLPMR,Port low power mode register" bitfld.long 0x0 0. "WME,Wake-on-LAN mode enable When Wake-on-LAN mode is enabled ENETC will detect Wake-on-LAN events" "0,1" rgroup.long 0x344++0x3 line.long 0x0 "PWOSR,Port wake-on status register" bitfld.long 0x0 1. "ICMB,ICM blocked 0 Not blocked 1 Blocked" "0,1" bitfld.long 0x0 0. "WOLA,Wake-On-LAN active 0 Inactive 1 Active" "0,1" group.long 0x370++0x3 line.long 0x0 "IPV2ICMPMR0,Receive IPV to ICM priority mapping register 0" bitfld.long 0x0 28. "IPV7ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 24. "IPV6ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 20. "IPV5ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 16. "IPV4ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 12. "IPV3ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 8. "IPV2ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 4. "IPV1ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 0. "IPV0ICM,Mapping of internal priority value (IPV) i={0" "0,1" group.long 0x380++0x3 line.long 0x0 "PRIO2TCMR0,Transmit priority to traffic class mapping register 0" bitfld.long 0x0 28.--30. "PRIO7TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "PRIO6TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 20.--22. "PRIO5TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "PRIO4TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 12.--14. "PRIO3TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "PRIO2TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "PRIO1TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO0TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x390)++0x3 line.long 0x0 "PTCTSDR[$1],Port traffic class a time specific departure register" bitfld.long 0x0 31. "TSDE,Time specific departure enable The 1588 timer must be initialized before enabling time specific departure on any traffic class" "0: Disable,1: Enable" repeat.end rgroup.long 0x800++0x3 line.long 0x0 "SMCAPR,Switch management capability register" bitfld.long 0x0 0. "SM,When set indicates that this ENETC instance has switch management capability" "0,1" rgroup.long 0x2000++0x7 line.long 0x0 "PSI0PMAR0,Port station interface 0 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI0PMAR1,Port station interface 0 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" group.long 0x2008++0x3 line.long 0x0 "PSI0VLANR,Port station interface 0 VLAN register" bitfld.long 0x0 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x0 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x0 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x0 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x0 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x0 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x0 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x0 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2010++0x3 line.long 0x0 "PSI0CFGR0,Port station interface 0 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" group.long 0x2018++0x3 line.long 0x0 "PSI0CFGR2,Port station interface 0 configuration register 2" hexmask.long.byte 0x0 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x2030++0x7 line.long 0x0 "PSI0VMAFCFGR,Port station interface 0 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI0VLANFCFGR,Port station interface 0 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x2050++0x17 line.long 0x0 "PSI0UMHFR0,Port station interface 0 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI0UMHFR1,Port station interface 0 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI0MMHFR0,Port station interface 0 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI0MMHFR1,Port station interface 0 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI0VHFR0,Port station interface 0 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI0VHFR1,Port station interface 0 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." group.long 0x2080++0xB line.long 0x0 "PSI1PMAR0,Port station interface 1 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI1PMAR1,Port station interface 1 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x8 "PSI1VLANR,Port station interface 1 VLAN register" bitfld.long 0x8 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x8 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x8 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x8 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x8 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x8 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x8 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x8 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2090++0xB line.long 0x0 "PSI1CFGR0,Port station interface 1 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" line.long 0x4 "PSI1CFGR1,Port station interface 1 configuration register 1" bitfld.long 0x4 28.--30. "TC7_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 7 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "TC6_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 6 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "TC5_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 5 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "TC4_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 4 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "TC3_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 3 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "TC2_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 2 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "TC1_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 1 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "TC0_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 0 to set transmit traffic class." "0,1,2,3,4,5,6,7" line.long 0x8 "PSI1CFGR2,Port station interface 1 configuration register 2" hexmask.long.byte 0x8 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x20B0++0x7 line.long 0x0 "PSI1VMAFCFGR,Port station interface 1 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI1VLANFCFGR,Port station interface 1 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x20D0++0x17 line.long 0x0 "PSI1UMHFR0,Port station interface 1 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI1UMHFR1,Port station interface 1 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI1MMHFR0,Port station interface 1 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI1MMHFR1,Port station interface 1 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI1VHFR0,Port station interface 1 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI1VHFR1,Port station interface 1 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." group.long 0x2100++0xB line.long 0x0 "PSI2PMAR0,Port station interface 2 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI2PMAR1,Port station interface 2 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x8 "PSI2VLANR,Port station interface 2 VLAN register" bitfld.long 0x8 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x8 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x8 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x8 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x8 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x8 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x8 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x8 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2110++0xB line.long 0x0 "PSI2CFGR0,Port station interface 2 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" line.long 0x4 "PSI2CFGR1,Port station interface 2 configuration register 1" bitfld.long 0x4 28.--30. "TC7_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 7 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "TC6_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 6 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "TC5_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 5 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "TC4_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 4 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "TC3_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 3 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "TC2_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 2 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "TC1_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 1 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "TC0_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 0 to set transmit traffic class." "0,1,2,3,4,5,6,7" line.long 0x8 "PSI2CFGR2,Port station interface 2 configuration register 2" hexmask.long.byte 0x8 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x2130++0x7 line.long 0x0 "PSI2VMAFCFGR,Port station interface 2 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI2VLANFCFGR,Port station interface 2 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x2150++0x17 line.long 0x0 "PSI2UMHFR0,Port station interface 2 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI2UMHFR1,Port station interface 2 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI2MMHFR0,Port station interface 2 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI2MMHFR1,Port station interface 2 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI2VHFR0,Port station interface 2 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI2VHFR1,Port station interface 2 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." tree.end tree "ENETC0_COMMON" base ad:0x4CC10000 rgroup.long 0x1000++0x7 line.long 0x0 "IPCAPR,Ingress port capability register" hexmask.long.byte 0x0 16.--19. 1. "NUM_VQMP,Specifies the number a of receive VLAN PCP/DE to QoS mapping profiles supported; see registers VLANIPVMPaR0/1 and VLANDRMPaR where a={0" hexmask.long.byte 0x0 8.--12. 1. "SDU,Indicates support for various PDU/SDUs (Protocol/Service Data Unit) definitions." newline bitfld.long 0x0 2. "ISID,Ingress Stream Identification functionality is supported if set. See ISIDCAPR for more info." "0,1" bitfld.long 0x0 1. "IPFLT,Ingress Port Filtering is supported (i" "0,1" newline bitfld.long 0x0 0. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" line.long 0x4 "EPCAPR,Egress port capability register" hexmask.long.byte 0x4 8.--12. 1. "SDU,Indicates support for various PDU/SDUs (Protocol/Service Data Unit) definitions." rgroup.long 0x1010++0x3 line.long 0x0 "OSR,Operational state register" bitfld.long 0x0 1. "ITM_STATE,Indicates the index table memory (common memory) operational state" "0,1" bitfld.long 0x0 0. "STATE,Indicates the function's operational state 0: Function is operationally ready" "0: Function is operationally ready,?" group.long 0x1040++0x7 line.long 0x0 "CMECR,Correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "CMESR,Correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" newline hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x104C++0x3 line.long 0x0 "CMECTR,Correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0x1060++0x3 line.long 0x0 "UNMACECR,Uncorrectable non-fatal MAC error configuration register" bitfld.long 0x0 0. "PORT0,Report disable port" "0,1" rgroup.long 0x1064++0x3 line.long 0x0 "UNMACESR,Uncorrectable non-fatal MAC error status register" bitfld.long 0x0 0. "PORT0,Port MAC error" "0,1" group.long 0x1090++0x7 line.long 0x0 "UNMECR,Uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "UNMESR0,Uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x1098++0x7 line.long 0x0 "UNMESR1,Uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "UNMECTR,Uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0x10A0++0x7 line.long 0x0 "UFMECR,Uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "UFMESR0,Uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" newline hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" newline hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x10A8++0x3 line.long 0x0 "UFMESR1,Uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x10D0++0x3 line.long 0x0 "MIRR,MAC interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt was generated by the MAC" "0,1" group.long 0x10D4++0x3 line.long 0x0 "MMSIVR,MAC MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" rgroup.long 0x10E8++0x3 line.long 0x0 "EMDIOIRR,External MDIO interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt is pending by EMDIO controller due to completion of a PHY MDIO access" "0,1" group.long 0x10EC++0x3 line.long 0x0 "EMDIOMSIVR,External MDIO MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" group.long 0x1200++0x7 line.long 0x0 "CVLANR1,Custom VLAN Ethertype register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "CVLANR2,Custom VLAN Ethertype register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x1220++0x3 line.long 0x0 "DOSL2CR,DoS L2 configuration register" bitfld.long 0x0 1. "MSAMCC,If set received frames with Multicast SMAC address are discarded." "0,1" bitfld.long 0x0 0. "SAMEADDR,If set received frames with SMAC = DMAC are discarded" "0,1" group.long 0x1300++0xB line.long 0x0 "VLANIPVMP0R0,VLAN to IPV mapping profile 0 register 0" bitfld.long 0x0 28.--30. "PCP_DEI_7,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "PCP_DEI_6,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 20.--22. "PCP_DEI_5,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "PCP_DEI_4,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 12.--14. "PCP_DEI_3,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "PCP_DEI_2,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "PCP_DEI_1,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PCP_DEI_0,IPV value used for receive data path." "0,1,2,3,4,5,6,7" line.long 0x4 "VLANIPVMP0R1,VLAN to IPV mapping profile 0 register 1" bitfld.long 0x4 28.--30. "PCP_DEI_15,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "PCP_DEI_14,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "PCP_DEI_13,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PCP_DEI_12,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "PCP_DEI_11,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "PCP_DEI_10,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "PCP_DEI_9,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "PCP_DEI_8,IPV value used for receive data path." "0,1,2,3,4,5,6,7" line.long 0x8 "VLANDRMP0R,VLAN to DR mapping profile 0 register" bitfld.long 0x8 30.--31. "PCP_DEI_15,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 28.--29. "PCP_DEI_14,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 26.--27. "PCP_DEI_13,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 24.--25. "PCP_DEI_12,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 22.--23. "PCP_DEI_11,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 20.--21. "PCP_DEI_10,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 18.--19. "PCP_DEI_9,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 16.--17. "PCP_DEI_8,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 14.--15. "PCP_DEI_7,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 12.--13. "PCP_DEI_6,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 10.--11. "PCP_DEI_5,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 8.--9. "PCP_DEI_4,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 6.--7. "PCP_DEI_3,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 4.--5. "PCP_DEI_2,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 2.--3. "PCP_DEI_1,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 0.--1. "PCP_DEI_0,DR value used for receive data path." "0,1,2,3" rgroup.long 0x1640++0xB line.long 0x0 "IPFCAPR,Ingress port filter capability register" bitfld.long 0x0 3. "WOL,When set has ability to trigger a Wake on LAN event." "0,1" bitfld.long 0x0 2. "FWD_SI,When set has ability to forward to a set of Station Interfaces (SIs)." "0,1" newline bitfld.long 0x0 1. "ISID,When set has ability to identify an Ingress Stream. See ISIDCAPR for more info." "0,1" bitfld.long 0x0 0. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" line.long 0x4 "IPFTCAPR,Ingress port filter table capability register" bitfld.long 0x4 28.--29. "WORD_SIZE,Word size in bits of the ternary memory. 0: 48 bits 1-3: Reserved" "?,?,?,3: Reserved" hexmask.long.byte 0x4 24.--27. 1. "ENTRY_MAX_WORDS,Maximum number of consecutive words which can form a TM Entry" newline hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which Configuration Access Methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" bitfld.long 0x4 16. "MGMT,Indicates if table entries are managed by software driver or by hardware" "0,1" newline hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,Number of ternary memory words supported" line.long 0x8 "IPFTMOR,Ingress port filter table memory operational register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,Number of words in-use." rgroup.long 0x1800++0x3 line.long 0x0 "ITMCAPR,Index table memory capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1: Reserved" "0: Common memory,1: Reserved,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 bytes 1-3: Reserved" "?,?,?,3: Reserved" newline hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of Words in the Index table memory" rgroup.long 0x1810++0x7 line.long 0x0 "RPCAPR,Rate policer capability register" bitfld.long 0x0 1. "CM,Color Mode capability 0: Support Color Blind mode only 1: Support Color Blind and Color Aware modes" "0: Support Color Blind mode only,1: Support Color Blind and Color Aware modes" bitfld.long 0x0 0. "TRTCM,Two-Rate Thee-Color Marker supported per MEF 10.3 standard." "0,1" line.long 0x4 "RPITCAPR,Rate policer index table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x4 0.--13. 1. "NUM_ENTRIES,The number of entries assigned to this table. Reset value is specified by ROUNDDOWN(RPITMAR/4)." group.long 0x1818++0x3 line.long 0x0 "RPITMAR,Rate policer index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" rgroup.long 0x181C++0x3 line.long 0x0 "RPITOR,Rate policer index table operational register" hexmask.long.word 0x0 0.--13. 1. "NUM_ENTRIES,The number of entries in-use by this table." rgroup.long 0x1824++0x3 line.long 0x0 "ISCITCAPR,Ingress stream counter index table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table. The reset value of this field comes from ISCITMAR." group.long 0x1828++0x3 line.long 0x0 "ISCITMAR,Ingress stream counter index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each Entry consist of 1 word." rgroup.long 0x182C++0xB line.long 0x0 "ISCITOR,Ingress stream counter index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries allocated / in-use by this table." line.long 0x4 "ISCAPR,Ingress stream capability register" bitfld.long 0x4 9. "FWD,When set can specify a set of destination to forward the frame." "0,1" bitfld.long 0x4 5. "MAXSDU,When set maximum SDU check is supported. Various SDUs supported are specified in IPCAPR." "0,1" newline bitfld.long 0x4 4. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" bitfld.long 0x4 3. "SG,When set Stream Gating is supported. See SGCAPR for more info." "0,1" line.long 0x8 "ISITCAPR,Ingress stream index table capability register" hexmask.long.byte 0x8 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x8 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table. The reset value of this field comes from ISITMAR." group.long 0x1838++0x3 line.long 0x0 "ISITMAR,Ingress stream index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each Entry consist of 1 word." rgroup.long 0x183C++0x3 line.long 0x0 "ISITOR,Ingress stream index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries in-use by this table." rgroup.long 0x1860++0x7 line.long 0x0 "SGCAPR,Stream gate capability register" bitfld.long 0x0 4. "GLC_CTD,Each Gate Control List Entry supports configurable CTD (Cut-Through Disable state)." "0,1" bitfld.long 0x0 3. "GLC_IPV,Each Gate Control List Entry supports configurable IPV." "0,1" newline bitfld.long 0x0 2. "GLC_IO,Each Gate Control List Entry support Interval Max Octet check." "0,1" bitfld.long 0x0 1. "GLC_GC,Support configurable option indicating if GCL's Gate Check is from SFD only or SFD until EOF" "0,1" newline bitfld.long 0x0 0. "GLC_AO,Support Administrative and Operational Gate Control List." "0,1" line.long 0x4 "SGIITCAPR,Stream gate instance index table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x4 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table." group.long 0x1868++0x3 line.long 0x0 "SGIITMAR,Stream gate instance index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each entry occupies 1 word." rgroup.long 0x186C++0x3 line.long 0x0 "SGIITOR,Stream gate instance index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries allocated / in-use by this table." rgroup.long 0x1874++0x3 line.long 0x0 "SGCLITCAPR,Stream gate control list index table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x1878++0x3 line.long 0x0 "SGCLITMAR,Stream gate control list index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" rgroup.long 0x187C++0x3 line.long 0x0 "SGCLTMOR,Stream gate control list table memory operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of words in-use." rgroup.long 0x18D4++0x3 line.long 0x0 "TGSTCAPR,Time gate scheduling table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSION,Version bitmap indicating the Table version supported." hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words available to this Time Gate Scheduling table" rgroup.long 0x18DC++0x3 line.long 0x0 "TGSTMOR,Time gate scheduling table memory operation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words in-use." rgroup.long 0x1900++0x7 line.long 0x0 "HTMCAPR,Hash table memory capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1: Reserved" "0: Common memory,1: Reserved,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 bytes 1-3: Reserved" "?,?,?,3: Reserved" newline hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Maximum number of Words allotted to Exact Match hash table from the Common Memory's Shared region" line.long 0x4 "HTMOR,Hash table memory operational register" hexmask.long.word 0x4 16.--31. 1. "WATERMARK,High WaterMark of Words allocated. Value reset to AMOUNT when read." hexmask.long.word 0x4 0.--15. 1. "AMOUNT,Number of Words in use by this function which has been allocated by the various hash tables." rgroup.long 0x1910++0x7 line.long 0x0 "ISIDCAPR,Ingress stream identification capability register" bitfld.long 0x0 17. "ETHFT,When set support Ethernet Frame Type" "0,1" bitfld.long 0x0 16. "UFT,When set support Unknown Frame Type" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "MAX_KSIZE,Maximum Key Size in bytes which can be constructed using the frame's fields." bitfld.long 0x0 2.--4. "NUM_PF,Number of configurable Payload Fields supported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0.--1. "NUM_KC,Number of Exact Match Key Construction Instances supported for Ingress Stream Identification" "0,1,2,3" line.long 0x4 "ISIDHTCAPR,Ingress stream identification hash table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" rgroup.long 0x1920++0x3 line.long 0x0 "ISIDKC0OR,Ingress stream identification key construction 0 operational register" bitfld.long 0x0 31. "EN,Operational state of this key construction register: 0: Disabled: Exact Match Lookup must not utilize this key construction" "0: Disabled: Exact Match Lookup must not utilize..,?" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,Indicates the number of Ingress Stream Identification i" group.long 0x1924++0x3 line.long 0x0 "ISIDKC0CR0,Ingress stream identification key construction 0 configuration register 0" bitfld.long 0x0 10. "ETP,If set the 2 Byte Ethertype field is included in the Key" "0,1" bitfld.long 0x0 9. "SQTP,Sequence Tag Present If set to 1 a 1-byte frame attribute code point is included in the key indicating whether there is no R-TAG/HSR tag 802" "?,1: byte frame attribute code point is included in.." newline bitfld.long 0x0 8. "IPCPP,If set inner VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 7. "IVIDP,If set inner VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 6. "OPCPP,If set outer VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 5. "OVIDP,If set outer VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 4. "SMACP,If set 6 bytes of source MAC address is included in the key." "0,1" bitfld.long 0x0 3. "DMACP,If set 6 bytes of destination MAC address is included in the key." "0,1" newline bitfld.long 0x0 1. "PORTP,If set source port is included in the key" "0,1" bitfld.long 0x0 0. "VALID,When set this Key Construction is valid" "0,1" group.long 0x1930++0xF line.long 0x0 "ISIDKC0PF0CR,Ingress stream identification key construction 0 payload field 0 configuration register" bitfld.long 0x0 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x0 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x0 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x4 "ISIDKC0PF1CR,Ingress stream identification key construction 0 payload field 1 configuration register" bitfld.long 0x4 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x4 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x4 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x8 "ISIDKC0PF2CR,Ingress stream identification key construction 0 payload field 2 configuration register" bitfld.long 0x8 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x8 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x8 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0xC "ISIDKC0PF3CR,Ingress stream identification key construction 0 payload field 3 configuration register" bitfld.long 0xC 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0xC 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0xC 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" rgroup.long 0x1940++0x3 line.long 0x0 "ISIDKC1OR,Ingress stream identification key construction 1 operational register" bitfld.long 0x0 31. "EN,Operational state of this key construction register: 0: Disabled: Exact Match Lookup must not utilize this key construction" "0: Disabled: Exact Match Lookup must not utilize..,?" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,Indicates the number of Ingress Stream Identification i" group.long 0x1944++0x3 line.long 0x0 "ISIDKC1CR0,Ingress stream identification key construction 1 configuration register 0" bitfld.long 0x0 10. "ETP,If set the 2 Byte Ethertype field is included in the Key" "0,1" bitfld.long 0x0 9. "SQTP,Sequence Tag Present If set to 1 a 1-byte frame attribute code point is included in the key indicating whether there is no R-TAG/HSR tag 802" "?,1: byte frame attribute code point is included in.." newline bitfld.long 0x0 8. "IPCPP,If set inner VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 7. "IVIDP,If set inner VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 6. "OPCPP,If set outer VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 5. "OVIDP,If set outer VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 4. "SMACP,If set 6 bytes of source MAC address is included in the key." "0,1" bitfld.long 0x0 3. "DMACP,If set 6 bytes of destination MAC address is included in the key." "0,1" newline bitfld.long 0x0 1. "PORTP,If set source port is included in the key" "0,1" bitfld.long 0x0 0. "VALID,When set this Key Construction is valid" "0,1" group.long 0x1950++0xF line.long 0x0 "ISIDKC1PF0CR,Ingress stream identification key construction 1 payload field 0 configuration register" bitfld.long 0x0 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x0 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x0 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x4 "ISIDKC1PF1CR,Ingress stream identification key construction 1 payload field 1 configuration register" bitfld.long 0x4 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x4 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x4 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x8 "ISIDKC1PF2CR,Ingress stream identification key construction 1 payload field 2 configuration register" bitfld.long 0x8 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x8 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x8 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0xC "ISIDKC1PF3CR,Ingress stream identification key construction 1 payload field 3 configuration register" bitfld.long 0xC 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0xC 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0xC 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" rgroup.long 0x1A00++0x7 line.long 0x0 "ISFHTCAPR,Ingress stream filter hash table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: Index xx1x: EntryId x1xx: Search 1xxx: Reserved" line.long 0x4 "ISFHTOR,Ingress stream filter hash table operational register" hexmask.long.word 0x4 0.--15. 1. "NUM_ENTRIES,Number of entries in-use by this table." tree.end tree "ENETC1_BASE" base ad:0x4CC90000 rgroup.long 0x0++0xB line.long 0x0 "ECAPR0,ENETC capability register 0" bitfld.long 0x0 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x0 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 10. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" bitfld.long 0x0 9. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" bitfld.long 0x0 5. "TSD,Support for time specific departure. 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" line.long 0x4 "ECAPR1,ENETC capability register 1" bitfld.long 0x4 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0x4 24.--27. 1. "NUM_VSI,Indicates the number of VSI supported" newline hexmask.long.word 0x4 12.--22. 1. "NUM_MSIX,Number of MSI-X" bitfld.long 0x4 10.--11. "NUM_UCH,Number of uni-cast hash entry (1bit/entry) per SI for L2 MAC Filtering 00 64 unicast bins 01 128 unicast bins 10 256 unicast bins 11 512 unicast bins" "0,1,2,3" newline bitfld.long 0x4 8.--9. "NUM_MCH,Number of multi-cast hash entry (1bit/entry) per SI for L2 MAC Filtering 00 64 multi-cast bins 01 128 multi-cast bins 10 256 multi-cast bins 11 512 multi-cast bins" "0,1,2,3" bitfld.long 0x4 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" line.long 0x8 "ECAPR2,ENETC capability register 2" hexmask.long.word 0x8 16.--25. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings assigned to ENETC Range: 0..256" hexmask.long.word 0x8 0.--9. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings assigned to ENETC Range: 0..256" group.long 0x10++0x3 line.long 0x0 "PMR,Port mode register" bitfld.long 0x0 18. "SI2EN,Enable station interface 2" "0,1" bitfld.long 0x0 17. "SI1EN,Enable station interface 1" "0,1" newline bitfld.long 0x0 16. "SI0EN,Enable station interface 0" "0,1" group.long 0x80++0xB line.long 0x0 "PONVLANR,Port outer native VLAN register" bitfld.long 0x0 19. "VZE,0 do not use the port outer native VLAN VID when the VID in the packet's outer VLAN tag is zero 1 use the port outer native VLAN VID when the VID in the packet's outer VLAN tag is zero" "0,1" bitfld.long 0x0 18. "PNE,0 do not use the port outer native VLAN when outer VLAN tag is not present 1 use the port outer native VLAN when outer VLAN tag is not present" "0,1" newline bitfld.long 0x0 16.--17. "TPID,Identifies which known VLAN Ethertype is used 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE] 11 Custom VLAN as defined by CVLANR2[ETYPE]" "0,1,2,3" bitfld.long 0x0 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x0 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x0 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" line.long 0x4 "PINVLANR,Port inner native VLAN register" bitfld.long 0x4 19. "VZE,0 do not use the port inner native VLAN VID when the VID in the packet's inner VLAN tag is zero 1 use the port inner native VLAN VID when the VID in the packet's inner VLAN tag is zero" "0,1" bitfld.long 0x4 18. "PNE,0 do not use the port inner native VLAN when inner VLAN tag is not present 1 use the port inner native VLAN when inner VLAN tag is not present" "0,1" newline bitfld.long 0x4 16.--17. "TPID,Identifies which known VLAN Ethertype is used 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE] 11 Custom VLAN as defined by CVLANR2[ETYPE]" "0,1,2,3" bitfld.long 0x4 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x4 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x4 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" line.long 0x8 "PVCLCTR,Port VLAN classification control register" bitfld.long 0x8 9. "OAI,Outer as Inner: 0 Indicates that the Inner is not valid if only one tag is found 1 Indicates that the outer should be used as the Inner if only one tag is found" "0,1" group.long 0x9C++0x3 line.long 0x0 "PARCSCR,Parser checksum configuration register" bitfld.long 0x0 1. "L3CD,Layer 3 IPv4 Header checksum validation Disable." "0,1" bitfld.long 0x0 0. "L4CD,Layer 4 TCP and UDP checksum validation Disable." "0,1" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xA0)++0x3 line.long 0x0 "PARCECR[$1],Parser custom Ethertype i configuration register" hexmask.long.word 0x0 16.--31. 1. "ETYPE,ETYPE" bitfld.long 0x0 5. "EN,EN" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "CP,CP" repeat.end group.long 0x108++0x7 line.long 0x0 "PPAUONTR,Port pause ON threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Monitors the amount of data accumulated in the receive buffer and if this amount exceeds the Pause ON threshold (expressed in words) it then enters the 'Pause ON' state if Pause is enabled" line.long 0x4 "PPAUOFFTR,Port pause OFF threshold register" hexmask.long.tbyte 0x4 0.--23. 1. "THRESH,Monitors the amount of data accumulated in the receive buffer and if this amount goes below the Pause OFF threshold (expressed in words) it then enters the 'Pause OFF' state if Pause is enabled" rgroup.long 0x120++0xF line.long 0x0 "PRXMBER,Port receive memory buffer entitlement register" hexmask.long.tbyte 0x0 0.--23. 1. "AMOUNT,Receive memory buffer entitlement in words This receive Memory Buffer Entitlement is used in determining smart drop for ingress congestion control" line.long 0x4 "PRXMBLR,Port receive memory buffer limit register" hexmask.long.tbyte 0x4 0.--23. 1. "LIMIT,Receive buffer memory limit in words" line.long 0x8 "PRXBCR,Port receive buffer count register" hexmask.long.tbyte 0x8 0.--23. 1. "COUNT,Current receive buffer usage count in words for this port." line.long 0xC "PRXBCHWMR,Port receive buffer count high watermark register" hexmask.long.tbyte 0xC 0.--23. 1. "WATERMARK,High watermark in words for receive buffer usage since the last read of this register" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x4CC90140 ad:0x4CC90150 ad:0x4CC90160 ad:0x4CC90170) tree "PICDRaDCR[$1]" base $2 rgroup.long ($2)++0x3 line.long 0x0 "PICDRDCR,Port ingress congestion DRindex discard count register" hexmask.long 0x0 0.--31. 1. "COUNT,Number of frames discarded by Ingress Congestion Manager for this port and for each discard resilience (DR) value" rgroup.long ($2+0x8)++0x3 line.long 0x0 "PICDRDCRRR,Port ingress congestion DRindex discard count read-reset register" hexmask.long 0x0 0.--31. 1. "COUNT,Reading this register provides the count of all frames discarded at this DR level since the last reset of this count and also resets the count after the read" tree.end repeat.end base ad:0x4CC90000 group.long 0x180++0x3 line.long 0x0 "PICPDSR,Port ingress congestion priority discard status register" eventfld.long 0x0 28. "DR3_P1DS,DR3 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 24. "DR3_P0DS,DR3 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 20. "DR2_P1DS,DR2 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 16. "DR2_P0DS,DR2 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 12. "DR1_P1DS,DR1 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 8. "DR1_P0DS,DR1 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 4. "DR0_P1DS,DR0 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 0. "DR0_P0DS,DR0 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" group.long 0x200++0x7 line.long 0x0 "PSIPMMR,Port station interface promiscuous MAC mode register" bitfld.long 0x0 18. "SI2_MAC_MP,SI 2 MAC multicast promiscuous" "0,1" bitfld.long 0x0 17. "SI1_MAC_MP,SI 1 MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "0,1" bitfld.long 0x0 2. "SI2_MAC_UP,SI 2 MAC unicast promiscuous" "0,1" newline bitfld.long 0x0 1. "SI1_MAC_UP,SI 1 MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "0,1" line.long 0x4 "PSIPVMR,Port station interface promiscuous VLAN mode register" bitfld.long 0x4 18. "SI2_VLAN_UTA,SI 2 Untagged frames (no VLAN) accepted" "0,1" bitfld.long 0x4 17. "SI1_VLAN_UTA,SI 1 Untagged frames (no VLAN) accepted" "0,1" newline bitfld.long 0x4 16. "SI0_VLAN_UTA,SI 0 Untagged frames (no VLAN) accepted" "0,1" bitfld.long 0x4 2. "SI2_VLAN_P,SI 2 VLAN promiscuous. If set SI 2 qualifies for reception of all VLAN tags." "0,1" newline bitfld.long 0x4 1. "SI1_VLAN_P,SI 1 VLAN promiscuous. If set SI 1 qualifies for reception of all VLAN tags." "0,1" bitfld.long 0x4 0. "SI0_VLAN_P,SI 0 VLAN promiscuous. If set SI 0 qualifies for reception of all VLAN tags." "0,1" rgroup.long 0x208++0x7 line.long 0x0 "PBFDSIR,Port broadcast frames dropped due to MAC filtering register" hexmask.long 0x0 0.--31. 1. "FRAME_DROP,MAC filter broadcast frame drop counter bits 31-0" line.long 0x4 "PFDMSAPR,Port frame drop MAC source address pruning register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,MAC source address pruning frame drop counter bits 31-0" rgroup.long 0x240++0x3 line.long 0x0 "PRSSCAPR,Port RSS capability register" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS) bins per SI" group.long 0x244++0x3 line.long 0x0 "PRSSCR,Port RSS Control Register" bitfld.long 0x0 5. "IP6_DIS,IPv6 packet disable." "0,1" bitfld.long 0x0 4. "IP6UDP_DIS,IPv6 with UDP disable." "0,1" newline bitfld.long 0x0 3. "IP4UDP_DIS,IPv4 with UDP disable." "0,1" bitfld.long 0x0 2. "IP6TCP_DIS,IPv6 with TCP packet disable." "0,1" newline bitfld.long 0x0 1. "IP4_DIS,IPv4 packet disable." "0,1" bitfld.long 0x0 0. "IP4TCP_DIS,IPv4 with TCP packet disable." "0,1" group.long 0x250++0x27 line.long 0x0 "PRSSKR0,Port RSS key register 0" hexmask.long 0x0 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x4 "PRSSKR1,Port RSS key register 1" hexmask.long 0x4 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x8 "PRSSKR2,Port RSS key register 2" hexmask.long 0x8 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0xC "PRSSKR3,Port RSS key register 3" hexmask.long 0xC 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x10 "PRSSKR4,Port RSS key register 4" hexmask.long 0x10 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x14 "PRSSKR5,Port RSS key register 5" hexmask.long 0x14 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x18 "PRSSKR6,Port RSS key register 6" hexmask.long 0x18 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x1C "PRSSKR7,Port RSS key register 7" hexmask.long 0x1C 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x20 "PRSSKR8,Port RSS key register 8" hexmask.long 0x20 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x24 "PRSSKR9,Port RSS key register 9" hexmask.long 0x24 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" rgroup.long 0x280++0xB line.long 0x0 "PSIMAFCAPR,Port station interface MAC address filtering capability register" hexmask.long.word 0x0 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port." line.long 0x4 "PUFDMFR,Port unicast frames dropped due to MAC filtering register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,MAC filter unicast frame drop counter bits 31-0" line.long 0x8 "PMFDMFR,Port multicast frames dropped due to MAC filtering register" hexmask.long 0x8 0.--31. 1. "FRAME_DROP,MAC filter multicast frame drop counter bits 31-0" rgroup.long 0x2C0++0x3 line.long 0x0 "PSIVLANFCAPR,Port station interface VLAN filtering capability register" hexmask.long.word 0x0 0.--11. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries per port. Range: 0..4K-1" group.long 0x2C4++0x3 line.long 0x0 "PSIVLANFMR,Port station interface VLAN filtering mode register" bitfld.long 0x0 0. "VS,VLAN tag select 0 Inner VLAN tag will be used for VLAN filtering 1 Outer VLAN tag will be used for VLAN filtering" "0,1" rgroup.long 0x2D0++0xB line.long 0x0 "PUFDVFR,Port unicast frames dropped VLAN filtering register" hexmask.long 0x0 0.--31. 1. "FRAME_DROP,VLAN filter unicast frame drop counter bits 31-0" line.long 0x4 "PMFDVFR,Port multicast frames dropped VLAN filtering register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,VLAN filter multicast frame drop counter bits 31-0" line.long 0x8 "PBFDVFR,Port broadcast frames dropped VLAN filtering register" hexmask.long 0x8 0.--31. 1. "FRAME_DROP,VLAN filter broadcast frame drop counter bits 31-0" group.long 0x340++0x3 line.long 0x0 "PLPMR,Port low power mode register" bitfld.long 0x0 0. "WME,Wake-on-LAN mode enable When Wake-on-LAN mode is enabled ENETC will detect Wake-on-LAN events" "0,1" rgroup.long 0x344++0x3 line.long 0x0 "PWOSR,Port wake-on status register" bitfld.long 0x0 1. "ICMB,ICM blocked 0 Not blocked 1 Blocked" "0,1" bitfld.long 0x0 0. "WOLA,Wake-On-LAN active 0 Inactive 1 Active" "0,1" group.long 0x370++0x3 line.long 0x0 "IPV2ICMPMR0,Receive IPV to ICM priority mapping register 0" bitfld.long 0x0 28. "IPV7ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 24. "IPV6ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 20. "IPV5ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 16. "IPV4ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 12. "IPV3ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 8. "IPV2ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 4. "IPV1ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 0. "IPV0ICM,Mapping of internal priority value (IPV) i={0" "0,1" group.long 0x380++0x3 line.long 0x0 "PRIO2TCMR0,Transmit priority to traffic class mapping register 0" bitfld.long 0x0 28.--30. "PRIO7TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "PRIO6TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 20.--22. "PRIO5TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "PRIO4TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 12.--14. "PRIO3TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "PRIO2TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "PRIO1TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO0TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x390)++0x3 line.long 0x0 "PTCTSDR[$1],Port traffic class a time specific departure register" bitfld.long 0x0 31. "TSDE,Time specific departure enable The 1588 timer must be initialized before enabling time specific departure on any traffic class" "0: Disable,1: Enable" repeat.end rgroup.long 0x800++0x3 line.long 0x0 "SMCAPR,Switch management capability register" bitfld.long 0x0 0. "SM,When set indicates that this ENETC instance has switch management capability" "0,1" rgroup.long 0x2000++0x7 line.long 0x0 "PSI0PMAR0,Port station interface 0 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI0PMAR1,Port station interface 0 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" group.long 0x2008++0x3 line.long 0x0 "PSI0VLANR,Port station interface 0 VLAN register" bitfld.long 0x0 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x0 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x0 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x0 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x0 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x0 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x0 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x0 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2010++0x3 line.long 0x0 "PSI0CFGR0,Port station interface 0 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" group.long 0x2018++0x3 line.long 0x0 "PSI0CFGR2,Port station interface 0 configuration register 2" hexmask.long.byte 0x0 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x2030++0x7 line.long 0x0 "PSI0VMAFCFGR,Port station interface 0 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI0VLANFCFGR,Port station interface 0 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x2050++0x17 line.long 0x0 "PSI0UMHFR0,Port station interface 0 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI0UMHFR1,Port station interface 0 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI0MMHFR0,Port station interface 0 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI0MMHFR1,Port station interface 0 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI0VHFR0,Port station interface 0 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI0VHFR1,Port station interface 0 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." group.long 0x2080++0xB line.long 0x0 "PSI1PMAR0,Port station interface 1 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI1PMAR1,Port station interface 1 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x8 "PSI1VLANR,Port station interface 1 VLAN register" bitfld.long 0x8 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x8 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x8 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x8 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x8 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x8 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x8 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x8 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2090++0xB line.long 0x0 "PSI1CFGR0,Port station interface 1 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" line.long 0x4 "PSI1CFGR1,Port station interface 1 configuration register 1" bitfld.long 0x4 28.--30. "TC7_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 7 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "TC6_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 6 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "TC5_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 5 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "TC4_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 4 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "TC3_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 3 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "TC2_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 2 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "TC1_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 1 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "TC0_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 0 to set transmit traffic class." "0,1,2,3,4,5,6,7" line.long 0x8 "PSI1CFGR2,Port station interface 1 configuration register 2" hexmask.long.byte 0x8 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x20B0++0x7 line.long 0x0 "PSI1VMAFCFGR,Port station interface 1 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI1VLANFCFGR,Port station interface 1 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x20D0++0x17 line.long 0x0 "PSI1UMHFR0,Port station interface 1 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI1UMHFR1,Port station interface 1 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI1MMHFR0,Port station interface 1 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI1MMHFR1,Port station interface 1 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI1VHFR0,Port station interface 1 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI1VHFR1,Port station interface 1 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." group.long 0x2100++0xB line.long 0x0 "PSI2PMAR0,Port station interface 2 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI2PMAR1,Port station interface 2 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x8 "PSI2VLANR,Port station interface 2 VLAN register" bitfld.long 0x8 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x8 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x8 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x8 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x8 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x8 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x8 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x8 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2110++0xB line.long 0x0 "PSI2CFGR0,Port station interface 2 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" line.long 0x4 "PSI2CFGR1,Port station interface 2 configuration register 1" bitfld.long 0x4 28.--30. "TC7_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 7 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "TC6_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 6 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "TC5_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 5 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "TC4_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 4 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "TC3_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 3 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "TC2_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 2 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "TC1_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 1 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "TC0_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 0 to set transmit traffic class." "0,1,2,3,4,5,6,7" line.long 0x8 "PSI2CFGR2,Port station interface 2 configuration register 2" hexmask.long.byte 0x8 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x2130++0x7 line.long 0x0 "PSI2VMAFCFGR,Port station interface 2 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI2VLANFCFGR,Port station interface 2 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x2150++0x17 line.long 0x0 "PSI2UMHFR0,Port station interface 2 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI2UMHFR1,Port station interface 2 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI2MMHFR0,Port station interface 2 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI2MMHFR1,Port station interface 2 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI2VHFR0,Port station interface 2 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI2VHFR1,Port station interface 2 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." tree.end tree "ENETC1_COMMON" base ad:0x4CC90000 rgroup.long 0x1000++0x7 line.long 0x0 "IPCAPR,Ingress port capability register" hexmask.long.byte 0x0 16.--19. 1. "NUM_VQMP,Specifies the number a of receive VLAN PCP/DE to QoS mapping profiles supported; see registers VLANIPVMPaR0/1 and VLANDRMPaR where a={0" hexmask.long.byte 0x0 8.--12. 1. "SDU,Indicates support for various PDU/SDUs (Protocol/Service Data Unit) definitions." newline bitfld.long 0x0 2. "ISID,Ingress Stream Identification functionality is supported if set. See ISIDCAPR for more info." "0,1" bitfld.long 0x0 1. "IPFLT,Ingress Port Filtering is supported (i" "0,1" newline bitfld.long 0x0 0. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" line.long 0x4 "EPCAPR,Egress port capability register" hexmask.long.byte 0x4 8.--12. 1. "SDU,Indicates support for various PDU/SDUs (Protocol/Service Data Unit) definitions." rgroup.long 0x1010++0x3 line.long 0x0 "OSR,Operational state register" bitfld.long 0x0 1. "ITM_STATE,Indicates the index table memory (common memory) operational state" "0,1" bitfld.long 0x0 0. "STATE,Indicates the function's operational state 0: Function is operationally ready" "0: Function is operationally ready,?" group.long 0x1040++0x7 line.long 0x0 "CMECR,Correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "CMESR,Correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" newline hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x104C++0x3 line.long 0x0 "CMECTR,Correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0x1060++0x3 line.long 0x0 "UNMACECR,Uncorrectable non-fatal MAC error configuration register" bitfld.long 0x0 0. "PORT0,Report disable port" "0,1" rgroup.long 0x1064++0x3 line.long 0x0 "UNMACESR,Uncorrectable non-fatal MAC error status register" bitfld.long 0x0 0. "PORT0,Port MAC error" "0,1" group.long 0x1090++0x7 line.long 0x0 "UNMECR,Uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "UNMESR0,Uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x1098++0x7 line.long 0x0 "UNMESR1,Uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "UNMECTR,Uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0x10A0++0x7 line.long 0x0 "UFMECR,Uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "UFMESR0,Uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" newline hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" newline hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x10A8++0x3 line.long 0x0 "UFMESR1,Uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x10D0++0x3 line.long 0x0 "MIRR,MAC interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt was generated by the MAC" "0,1" group.long 0x10D4++0x3 line.long 0x0 "MMSIVR,MAC MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" rgroup.long 0x10E8++0x3 line.long 0x0 "EMDIOIRR,External MDIO interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt is pending by EMDIO controller due to completion of a PHY MDIO access" "0,1" group.long 0x10EC++0x3 line.long 0x0 "EMDIOMSIVR,External MDIO MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" group.long 0x1200++0x7 line.long 0x0 "CVLANR1,Custom VLAN Ethertype register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "CVLANR2,Custom VLAN Ethertype register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x1220++0x3 line.long 0x0 "DOSL2CR,DoS L2 configuration register" bitfld.long 0x0 1. "MSAMCC,If set received frames with Multicast SMAC address are discarded." "0,1" bitfld.long 0x0 0. "SAMEADDR,If set received frames with SMAC = DMAC are discarded" "0,1" group.long 0x1300++0xB line.long 0x0 "VLANIPVMP0R0,VLAN to IPV mapping profile 0 register 0" bitfld.long 0x0 28.--30. "PCP_DEI_7,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "PCP_DEI_6,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 20.--22. "PCP_DEI_5,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "PCP_DEI_4,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 12.--14. "PCP_DEI_3,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "PCP_DEI_2,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "PCP_DEI_1,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PCP_DEI_0,IPV value used for receive data path." "0,1,2,3,4,5,6,7" line.long 0x4 "VLANIPVMP0R1,VLAN to IPV mapping profile 0 register 1" bitfld.long 0x4 28.--30. "PCP_DEI_15,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "PCP_DEI_14,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "PCP_DEI_13,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PCP_DEI_12,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "PCP_DEI_11,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "PCP_DEI_10,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "PCP_DEI_9,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "PCP_DEI_8,IPV value used for receive data path." "0,1,2,3,4,5,6,7" line.long 0x8 "VLANDRMP0R,VLAN to DR mapping profile 0 register" bitfld.long 0x8 30.--31. "PCP_DEI_15,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 28.--29. "PCP_DEI_14,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 26.--27. "PCP_DEI_13,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 24.--25. "PCP_DEI_12,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 22.--23. "PCP_DEI_11,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 20.--21. "PCP_DEI_10,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 18.--19. "PCP_DEI_9,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 16.--17. "PCP_DEI_8,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 14.--15. "PCP_DEI_7,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 12.--13. "PCP_DEI_6,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 10.--11. "PCP_DEI_5,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 8.--9. "PCP_DEI_4,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 6.--7. "PCP_DEI_3,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 4.--5. "PCP_DEI_2,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 2.--3. "PCP_DEI_1,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 0.--1. "PCP_DEI_0,DR value used for receive data path." "0,1,2,3" rgroup.long 0x1640++0xB line.long 0x0 "IPFCAPR,Ingress port filter capability register" bitfld.long 0x0 3. "WOL,When set has ability to trigger a Wake on LAN event." "0,1" bitfld.long 0x0 2. "FWD_SI,When set has ability to forward to a set of Station Interfaces (SIs)." "0,1" newline bitfld.long 0x0 1. "ISID,When set has ability to identify an Ingress Stream. See ISIDCAPR for more info." "0,1" bitfld.long 0x0 0. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" line.long 0x4 "IPFTCAPR,Ingress port filter table capability register" bitfld.long 0x4 28.--29. "WORD_SIZE,Word size in bits of the ternary memory. 0: 48 bits 1-3: Reserved" "?,?,?,3: Reserved" hexmask.long.byte 0x4 24.--27. 1. "ENTRY_MAX_WORDS,Maximum number of consecutive words which can form a TM Entry" newline hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which Configuration Access Methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" bitfld.long 0x4 16. "MGMT,Indicates if table entries are managed by software driver or by hardware" "0,1" newline hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,Number of ternary memory words supported" line.long 0x8 "IPFTMOR,Ingress port filter table memory operational register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,Number of words in-use." rgroup.long 0x1800++0x3 line.long 0x0 "ITMCAPR,Index table memory capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1: Reserved" "0: Common memory,1: Reserved,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 bytes 1-3: Reserved" "?,?,?,3: Reserved" newline hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of Words in the Index table memory" rgroup.long 0x1810++0x7 line.long 0x0 "RPCAPR,Rate policer capability register" bitfld.long 0x0 1. "CM,Color Mode capability 0: Support Color Blind mode only 1: Support Color Blind and Color Aware modes" "0: Support Color Blind mode only,1: Support Color Blind and Color Aware modes" bitfld.long 0x0 0. "TRTCM,Two-Rate Thee-Color Marker supported per MEF 10.3 standard." "0,1" line.long 0x4 "RPITCAPR,Rate policer index table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x4 0.--13. 1. "NUM_ENTRIES,The number of entries assigned to this table. Reset value is specified by ROUNDDOWN(RPITMAR/4)." group.long 0x1818++0x3 line.long 0x0 "RPITMAR,Rate policer index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" rgroup.long 0x181C++0x3 line.long 0x0 "RPITOR,Rate policer index table operational register" hexmask.long.word 0x0 0.--13. 1. "NUM_ENTRIES,The number of entries in-use by this table." rgroup.long 0x1824++0x3 line.long 0x0 "ISCITCAPR,Ingress stream counter index table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table. The reset value of this field comes from ISCITMAR." group.long 0x1828++0x3 line.long 0x0 "ISCITMAR,Ingress stream counter index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each Entry consist of 1 word." rgroup.long 0x182C++0xB line.long 0x0 "ISCITOR,Ingress stream counter index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries allocated / in-use by this table." line.long 0x4 "ISCAPR,Ingress stream capability register" bitfld.long 0x4 9. "FWD,When set can specify a set of destination to forward the frame." "0,1" bitfld.long 0x4 5. "MAXSDU,When set maximum SDU check is supported. Various SDUs supported are specified in IPCAPR." "0,1" newline bitfld.long 0x4 4. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" bitfld.long 0x4 3. "SG,When set Stream Gating is supported. See SGCAPR for more info." "0,1" line.long 0x8 "ISITCAPR,Ingress stream index table capability register" hexmask.long.byte 0x8 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x8 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table. The reset value of this field comes from ISITMAR." group.long 0x1838++0x3 line.long 0x0 "ISITMAR,Ingress stream index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each Entry consist of 1 word." rgroup.long 0x183C++0x3 line.long 0x0 "ISITOR,Ingress stream index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries in-use by this table." rgroup.long 0x1860++0x7 line.long 0x0 "SGCAPR,Stream gate capability register" bitfld.long 0x0 4. "GLC_CTD,Each Gate Control List Entry supports configurable CTD (Cut-Through Disable state)." "0,1" bitfld.long 0x0 3. "GLC_IPV,Each Gate Control List Entry supports configurable IPV." "0,1" newline bitfld.long 0x0 2. "GLC_IO,Each Gate Control List Entry support Interval Max Octet check." "0,1" bitfld.long 0x0 1. "GLC_GC,Support configurable option indicating if GCL's Gate Check is from SFD only or SFD until EOF" "0,1" newline bitfld.long 0x0 0. "GLC_AO,Support Administrative and Operational Gate Control List." "0,1" line.long 0x4 "SGIITCAPR,Stream gate instance index table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x4 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table." group.long 0x1868++0x3 line.long 0x0 "SGIITMAR,Stream gate instance index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each entry occupies 1 word." rgroup.long 0x186C++0x3 line.long 0x0 "SGIITOR,Stream gate instance index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries allocated / in-use by this table." rgroup.long 0x1874++0x3 line.long 0x0 "SGCLITCAPR,Stream gate control list index table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x1878++0x3 line.long 0x0 "SGCLITMAR,Stream gate control list index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" rgroup.long 0x187C++0x3 line.long 0x0 "SGCLTMOR,Stream gate control list table memory operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of words in-use." rgroup.long 0x18D4++0x3 line.long 0x0 "TGSTCAPR,Time gate scheduling table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSION,Version bitmap indicating the Table version supported." hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words available to this Time Gate Scheduling table" rgroup.long 0x18DC++0x3 line.long 0x0 "TGSTMOR,Time gate scheduling table memory operation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words in-use." rgroup.long 0x1900++0x7 line.long 0x0 "HTMCAPR,Hash table memory capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1: Reserved" "0: Common memory,1: Reserved,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 bytes 1-3: Reserved" "?,?,?,3: Reserved" newline hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Maximum number of Words allotted to Exact Match hash table from the Common Memory's Shared region" line.long 0x4 "HTMOR,Hash table memory operational register" hexmask.long.word 0x4 16.--31. 1. "WATERMARK,High WaterMark of Words allocated. Value reset to AMOUNT when read." hexmask.long.word 0x4 0.--15. 1. "AMOUNT,Number of Words in use by this function which has been allocated by the various hash tables." rgroup.long 0x1910++0x7 line.long 0x0 "ISIDCAPR,Ingress stream identification capability register" bitfld.long 0x0 17. "ETHFT,When set support Ethernet Frame Type" "0,1" bitfld.long 0x0 16. "UFT,When set support Unknown Frame Type" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "MAX_KSIZE,Maximum Key Size in bytes which can be constructed using the frame's fields." bitfld.long 0x0 2.--4. "NUM_PF,Number of configurable Payload Fields supported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0.--1. "NUM_KC,Number of Exact Match Key Construction Instances supported for Ingress Stream Identification" "0,1,2,3" line.long 0x4 "ISIDHTCAPR,Ingress stream identification hash table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" rgroup.long 0x1920++0x3 line.long 0x0 "ISIDKC0OR,Ingress stream identification key construction 0 operational register" bitfld.long 0x0 31. "EN,Operational state of this key construction register: 0: Disabled: Exact Match Lookup must not utilize this key construction" "0: Disabled: Exact Match Lookup must not utilize..,?" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,Indicates the number of Ingress Stream Identification i" group.long 0x1924++0x3 line.long 0x0 "ISIDKC0CR0,Ingress stream identification key construction 0 configuration register 0" bitfld.long 0x0 10. "ETP,If set the 2 Byte Ethertype field is included in the Key" "0,1" bitfld.long 0x0 9. "SQTP,Sequence Tag Present If set to 1 a 1-byte frame attribute code point is included in the key indicating whether there is no R-TAG/HSR tag 802" "?,1: byte frame attribute code point is included in.." newline bitfld.long 0x0 8. "IPCPP,If set inner VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 7. "IVIDP,If set inner VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 6. "OPCPP,If set outer VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 5. "OVIDP,If set outer VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 4. "SMACP,If set 6 bytes of source MAC address is included in the key." "0,1" bitfld.long 0x0 3. "DMACP,If set 6 bytes of destination MAC address is included in the key." "0,1" newline bitfld.long 0x0 1. "PORTP,If set source port is included in the key" "0,1" bitfld.long 0x0 0. "VALID,When set this Key Construction is valid" "0,1" group.long 0x1930++0xF line.long 0x0 "ISIDKC0PF0CR,Ingress stream identification key construction 0 payload field 0 configuration register" bitfld.long 0x0 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x0 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x0 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x4 "ISIDKC0PF1CR,Ingress stream identification key construction 0 payload field 1 configuration register" bitfld.long 0x4 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x4 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x4 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x8 "ISIDKC0PF2CR,Ingress stream identification key construction 0 payload field 2 configuration register" bitfld.long 0x8 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x8 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x8 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0xC "ISIDKC0PF3CR,Ingress stream identification key construction 0 payload field 3 configuration register" bitfld.long 0xC 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0xC 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0xC 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" rgroup.long 0x1940++0x3 line.long 0x0 "ISIDKC1OR,Ingress stream identification key construction 1 operational register" bitfld.long 0x0 31. "EN,Operational state of this key construction register: 0: Disabled: Exact Match Lookup must not utilize this key construction" "0: Disabled: Exact Match Lookup must not utilize..,?" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,Indicates the number of Ingress Stream Identification i" group.long 0x1944++0x3 line.long 0x0 "ISIDKC1CR0,Ingress stream identification key construction 1 configuration register 0" bitfld.long 0x0 10. "ETP,If set the 2 Byte Ethertype field is included in the Key" "0,1" bitfld.long 0x0 9. "SQTP,Sequence Tag Present If set to 1 a 1-byte frame attribute code point is included in the key indicating whether there is no R-TAG/HSR tag 802" "?,1: byte frame attribute code point is included in.." newline bitfld.long 0x0 8. "IPCPP,If set inner VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 7. "IVIDP,If set inner VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 6. "OPCPP,If set outer VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 5. "OVIDP,If set outer VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 4. "SMACP,If set 6 bytes of source MAC address is included in the key." "0,1" bitfld.long 0x0 3. "DMACP,If set 6 bytes of destination MAC address is included in the key." "0,1" newline bitfld.long 0x0 1. "PORTP,If set source port is included in the key" "0,1" bitfld.long 0x0 0. "VALID,When set this Key Construction is valid" "0,1" group.long 0x1950++0xF line.long 0x0 "ISIDKC1PF0CR,Ingress stream identification key construction 1 payload field 0 configuration register" bitfld.long 0x0 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x0 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x0 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x4 "ISIDKC1PF1CR,Ingress stream identification key construction 1 payload field 1 configuration register" bitfld.long 0x4 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x4 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x4 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x8 "ISIDKC1PF2CR,Ingress stream identification key construction 1 payload field 2 configuration register" bitfld.long 0x8 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x8 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x8 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0xC "ISIDKC1PF3CR,Ingress stream identification key construction 1 payload field 3 configuration register" bitfld.long 0xC 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0xC 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0xC 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" rgroup.long 0x1A00++0x7 line.long 0x0 "ISFHTCAPR,Ingress stream filter hash table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: Index xx1x: EntryId x1xx: Search 1xxx: Reserved" line.long 0x4 "ISFHTOR,Ingress stream filter hash table operational register" hexmask.long.word 0x4 0.--15. 1. "NUM_ENTRIES,Number of entries in-use by this table." tree.end tree "ENETC2_BASE" base ad:0x4CD10000 rgroup.long 0x0++0xB line.long 0x0 "ECAPR0,ENETC capability register 0" bitfld.long 0x0 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x0 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 10. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" bitfld.long 0x0 9. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" bitfld.long 0x0 5. "TSD,Support for time specific departure. 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x0 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" line.long 0x4 "ECAPR1,ENETC capability register 1" bitfld.long 0x4 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0x4 24.--27. 1. "NUM_VSI,Indicates the number of VSI supported" newline hexmask.long.word 0x4 12.--22. 1. "NUM_MSIX,Number of MSI-X" bitfld.long 0x4 10.--11. "NUM_UCH,Number of uni-cast hash entry (1bit/entry) per SI for L2 MAC Filtering 00 64 unicast bins 01 128 unicast bins 10 256 unicast bins 11 512 unicast bins" "0,1,2,3" newline bitfld.long 0x4 8.--9. "NUM_MCH,Number of multi-cast hash entry (1bit/entry) per SI for L2 MAC Filtering 00 64 multi-cast bins 01 128 multi-cast bins 10 256 multi-cast bins 11 512 multi-cast bins" "0,1,2,3" bitfld.long 0x4 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" line.long 0x8 "ECAPR2,ENETC capability register 2" hexmask.long.word 0x8 16.--25. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings assigned to ENETC Range: 0..256" hexmask.long.word 0x8 0.--9. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings assigned to ENETC Range: 0..256" group.long 0x10++0x3 line.long 0x0 "PMR,Port mode register" bitfld.long 0x0 18. "SI2EN,Enable station interface 2" "0,1" bitfld.long 0x0 17. "SI1EN,Enable station interface 1" "0,1" newline bitfld.long 0x0 16. "SI0EN,Enable station interface 0" "0,1" group.long 0x80++0xB line.long 0x0 "PONVLANR,Port outer native VLAN register" bitfld.long 0x0 19. "VZE,0 do not use the port outer native VLAN VID when the VID in the packet's outer VLAN tag is zero 1 use the port outer native VLAN VID when the VID in the packet's outer VLAN tag is zero" "0,1" bitfld.long 0x0 18. "PNE,0 do not use the port outer native VLAN when outer VLAN tag is not present 1 use the port outer native VLAN when outer VLAN tag is not present" "0,1" newline bitfld.long 0x0 16.--17. "TPID,Identifies which known VLAN Ethertype is used 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE] 11 Custom VLAN as defined by CVLANR2[ETYPE]" "0,1,2,3" bitfld.long 0x0 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x0 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x0 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" line.long 0x4 "PINVLANR,Port inner native VLAN register" bitfld.long 0x4 19. "VZE,0 do not use the port inner native VLAN VID when the VID in the packet's inner VLAN tag is zero 1 use the port inner native VLAN VID when the VID in the packet's inner VLAN tag is zero" "0,1" bitfld.long 0x4 18. "PNE,0 do not use the port inner native VLAN when inner VLAN tag is not present 1 use the port inner native VLAN when inner VLAN tag is not present" "0,1" newline bitfld.long 0x4 16.--17. "TPID,Identifies which known VLAN Ethertype is used 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE] 11 Custom VLAN as defined by CVLANR2[ETYPE]" "0,1,2,3" bitfld.long 0x4 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x4 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x4 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" line.long 0x8 "PVCLCTR,Port VLAN classification control register" bitfld.long 0x8 9. "OAI,Outer as Inner: 0 Indicates that the Inner is not valid if only one tag is found 1 Indicates that the outer should be used as the Inner if only one tag is found" "0,1" group.long 0x9C++0x3 line.long 0x0 "PARCSCR,Parser checksum configuration register" bitfld.long 0x0 1. "L3CD,Layer 3 IPv4 Header checksum validation Disable." "0,1" bitfld.long 0x0 0. "L4CD,Layer 4 TCP and UDP checksum validation Disable." "0,1" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xA0)++0x3 line.long 0x0 "PARCECR[$1],Parser custom Ethertype i configuration register" hexmask.long.word 0x0 16.--31. 1. "ETYPE,ETYPE" bitfld.long 0x0 5. "EN,EN" "0,1" newline hexmask.long.byte 0x0 0.--3. 1. "CP,CP" repeat.end group.long 0x108++0x7 line.long 0x0 "PPAUONTR,Port pause ON threshold register" hexmask.long.tbyte 0x0 0.--23. 1. "THRESH,Monitors the amount of data accumulated in the receive buffer and if this amount exceeds the Pause ON threshold (expressed in words) it then enters the 'Pause ON' state if Pause is enabled" line.long 0x4 "PPAUOFFTR,Port pause OFF threshold register" hexmask.long.tbyte 0x4 0.--23. 1. "THRESH,Monitors the amount of data accumulated in the receive buffer and if this amount goes below the Pause OFF threshold (expressed in words) it then enters the 'Pause OFF' state if Pause is enabled" rgroup.long 0x120++0xF line.long 0x0 "PRXMBER,Port receive memory buffer entitlement register" hexmask.long.tbyte 0x0 0.--23. 1. "AMOUNT,Receive memory buffer entitlement in words This receive Memory Buffer Entitlement is used in determining smart drop for ingress congestion control" line.long 0x4 "PRXMBLR,Port receive memory buffer limit register" hexmask.long.tbyte 0x4 0.--23. 1. "LIMIT,Receive buffer memory limit in words" line.long 0x8 "PRXBCR,Port receive buffer count register" hexmask.long.tbyte 0x8 0.--23. 1. "COUNT,Current receive buffer usage count in words for this port." line.long 0xC "PRXBCHWMR,Port receive buffer count high watermark register" hexmask.long.tbyte 0xC 0.--23. 1. "WATERMARK,High watermark in words for receive buffer usage since the last read of this register" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x4CD10140 ad:0x4CD10150 ad:0x4CD10160 ad:0x4CD10170) tree "PICDRaDCR[$1]" base $2 rgroup.long ($2)++0x3 line.long 0x0 "PICDRDCR,Port ingress congestion DRindex discard count register" hexmask.long 0x0 0.--31. 1. "COUNT,Number of frames discarded by Ingress Congestion Manager for this port and for each discard resilience (DR) value" rgroup.long ($2+0x8)++0x3 line.long 0x0 "PICDRDCRRR,Port ingress congestion DRindex discard count read-reset register" hexmask.long 0x0 0.--31. 1. "COUNT,Reading this register provides the count of all frames discarded at this DR level since the last reset of this count and also resets the count after the read" tree.end repeat.end base ad:0x4CD10000 group.long 0x180++0x3 line.long 0x0 "PICPDSR,Port ingress congestion priority discard status register" eventfld.long 0x0 28. "DR3_P1DS,DR3 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 24. "DR3_P0DS,DR3 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 20. "DR2_P1DS,DR2 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 16. "DR2_P0DS,DR2 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 12. "DR1_P1DS,DR1 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 8. "DR1_P0DS,DR1 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" newline eventfld.long 0x0 4. "DR0_P1DS,DR0 priority 1 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" eventfld.long 0x0 0. "DR0_P0DS,DR0 priority 0 discard status The bit will be set to 1 if one or more frames have been discarded at this DR and priority" "0,1" group.long 0x200++0x7 line.long 0x0 "PSIPMMR,Port station interface promiscuous MAC mode register" bitfld.long 0x0 18. "SI2_MAC_MP,SI 2 MAC multicast promiscuous" "0,1" bitfld.long 0x0 17. "SI1_MAC_MP,SI 1 MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "0,1" bitfld.long 0x0 2. "SI2_MAC_UP,SI 2 MAC unicast promiscuous" "0,1" newline bitfld.long 0x0 1. "SI1_MAC_UP,SI 1 MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "0,1" line.long 0x4 "PSIPVMR,Port station interface promiscuous VLAN mode register" bitfld.long 0x4 18. "SI2_VLAN_UTA,SI 2 Untagged frames (no VLAN) accepted" "0,1" bitfld.long 0x4 17. "SI1_VLAN_UTA,SI 1 Untagged frames (no VLAN) accepted" "0,1" newline bitfld.long 0x4 16. "SI0_VLAN_UTA,SI 0 Untagged frames (no VLAN) accepted" "0,1" bitfld.long 0x4 2. "SI2_VLAN_P,SI 2 VLAN promiscuous. If set SI 2 qualifies for reception of all VLAN tags." "0,1" newline bitfld.long 0x4 1. "SI1_VLAN_P,SI 1 VLAN promiscuous. If set SI 1 qualifies for reception of all VLAN tags." "0,1" bitfld.long 0x4 0. "SI0_VLAN_P,SI 0 VLAN promiscuous. If set SI 0 qualifies for reception of all VLAN tags." "0,1" rgroup.long 0x208++0x7 line.long 0x0 "PBFDSIR,Port broadcast frames dropped due to MAC filtering register" hexmask.long 0x0 0.--31. 1. "FRAME_DROP,MAC filter broadcast frame drop counter bits 31-0" line.long 0x4 "PFDMSAPR,Port frame drop MAC source address pruning register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,MAC source address pruning frame drop counter bits 31-0" rgroup.long 0x240++0x3 line.long 0x0 "PRSSCAPR,Port RSS capability register" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS) bins per SI" group.long 0x244++0x3 line.long 0x0 "PRSSCR,Port RSS Control Register" bitfld.long 0x0 5. "IP6_DIS,IPv6 packet disable." "0,1" bitfld.long 0x0 4. "IP6UDP_DIS,IPv6 with UDP disable." "0,1" newline bitfld.long 0x0 3. "IP4UDP_DIS,IPv4 with UDP disable." "0,1" bitfld.long 0x0 2. "IP6TCP_DIS,IPv6 with TCP packet disable." "0,1" newline bitfld.long 0x0 1. "IP4_DIS,IPv4 packet disable." "0,1" bitfld.long 0x0 0. "IP4TCP_DIS,IPv4 with TCP packet disable." "0,1" group.long 0x250++0x27 line.long 0x0 "PRSSKR0,Port RSS key register 0" hexmask.long 0x0 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x4 "PRSSKR1,Port RSS key register 1" hexmask.long 0x4 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x8 "PRSSKR2,Port RSS key register 2" hexmask.long 0x8 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0xC "PRSSKR3,Port RSS key register 3" hexmask.long 0xC 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x10 "PRSSKR4,Port RSS key register 4" hexmask.long 0x10 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x14 "PRSSKR5,Port RSS key register 5" hexmask.long 0x14 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x18 "PRSSKR6,Port RSS key register 6" hexmask.long 0x18 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x1C "PRSSKR7,Port RSS key register 7" hexmask.long 0x1C 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x20 "PRSSKR8,Port RSS key register 8" hexmask.long 0x20 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" line.long 0x24 "PRSSKR9,Port RSS key register 9" hexmask.long 0x24 0.--31. 1. "RSS_KEY,RSS Toeplitz secret key" rgroup.long 0x280++0xB line.long 0x0 "PSIMAFCAPR,Port station interface MAC address filtering capability register" hexmask.long.word 0x0 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port." line.long 0x4 "PUFDMFR,Port unicast frames dropped due to MAC filtering register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,MAC filter unicast frame drop counter bits 31-0" line.long 0x8 "PMFDMFR,Port multicast frames dropped due to MAC filtering register" hexmask.long 0x8 0.--31. 1. "FRAME_DROP,MAC filter multicast frame drop counter bits 31-0" rgroup.long 0x2C0++0x3 line.long 0x0 "PSIVLANFCAPR,Port station interface VLAN filtering capability register" hexmask.long.word 0x0 0.--11. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries per port. Range: 0..4K-1" group.long 0x2C4++0x3 line.long 0x0 "PSIVLANFMR,Port station interface VLAN filtering mode register" bitfld.long 0x0 0. "VS,VLAN tag select 0 Inner VLAN tag will be used for VLAN filtering 1 Outer VLAN tag will be used for VLAN filtering" "0,1" rgroup.long 0x2D0++0xB line.long 0x0 "PUFDVFR,Port unicast frames dropped VLAN filtering register" hexmask.long 0x0 0.--31. 1. "FRAME_DROP,VLAN filter unicast frame drop counter bits 31-0" line.long 0x4 "PMFDVFR,Port multicast frames dropped VLAN filtering register" hexmask.long 0x4 0.--31. 1. "FRAME_DROP,VLAN filter multicast frame drop counter bits 31-0" line.long 0x8 "PBFDVFR,Port broadcast frames dropped VLAN filtering register" hexmask.long 0x8 0.--31. 1. "FRAME_DROP,VLAN filter broadcast frame drop counter bits 31-0" group.long 0x340++0x3 line.long 0x0 "PLPMR,Port low power mode register" bitfld.long 0x0 0. "WME,Wake-on-LAN mode enable When Wake-on-LAN mode is enabled ENETC will detect Wake-on-LAN events" "0,1" rgroup.long 0x344++0x3 line.long 0x0 "PWOSR,Port wake-on status register" bitfld.long 0x0 1. "ICMB,ICM blocked 0 Not blocked 1 Blocked" "0,1" bitfld.long 0x0 0. "WOLA,Wake-On-LAN active 0 Inactive 1 Active" "0,1" group.long 0x370++0x3 line.long 0x0 "IPV2ICMPMR0,Receive IPV to ICM priority mapping register 0" bitfld.long 0x0 28. "IPV7ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 24. "IPV6ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 20. "IPV5ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 16. "IPV4ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 12. "IPV3ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 8. "IPV2ICM,Mapping of internal priority value (IPV) i={0" "0,1" newline bitfld.long 0x0 4. "IPV1ICM,Mapping of internal priority value (IPV) i={0" "0,1" bitfld.long 0x0 0. "IPV0ICM,Mapping of internal priority value (IPV) i={0" "0,1" group.long 0x380++0x3 line.long 0x0 "PRIO2TCMR0,Transmit priority to traffic class mapping register 0" bitfld.long 0x0 28.--30. "PRIO7TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "PRIO6TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 20.--22. "PRIO5TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "PRIO4TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 12.--14. "PRIO3TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "PRIO2TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "PRIO1TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO0TC,Transmit BD ring priority to traffic class mapping" "0,1,2,3,4,5,6,7" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x390)++0x3 line.long 0x0 "PTCTSDR[$1],Port traffic class a time specific departure register" bitfld.long 0x0 31. "TSDE,Time specific departure enable The 1588 timer must be initialized before enabling time specific departure on any traffic class" "0: Disable,1: Enable" repeat.end rgroup.long 0x800++0x3 line.long 0x0 "SMCAPR,Switch management capability register" bitfld.long 0x0 0. "SM,When set indicates that this ENETC instance has switch management capability" "0,1" rgroup.long 0x2000++0x7 line.long 0x0 "PSI0PMAR0,Port station interface 0 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI0PMAR1,Port station interface 0 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" group.long 0x2008++0x3 line.long 0x0 "PSI0VLANR,Port station interface 0 VLAN register" bitfld.long 0x0 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x0 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x0 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x0 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x0 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x0 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x0 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x0 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2010++0x3 line.long 0x0 "PSI0CFGR0,Port station interface 0 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" group.long 0x2018++0x3 line.long 0x0 "PSI0CFGR2,Port station interface 0 configuration register 2" hexmask.long.byte 0x0 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x2030++0x7 line.long 0x0 "PSI0VMAFCFGR,Port station interface 0 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI0VLANFCFGR,Port station interface 0 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x2050++0x17 line.long 0x0 "PSI0UMHFR0,Port station interface 0 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI0UMHFR1,Port station interface 0 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI0MMHFR0,Port station interface 0 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI0MMHFR1,Port station interface 0 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI0VHFR0,Port station interface 0 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI0VHFR1,Port station interface 0 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." group.long 0x2080++0xB line.long 0x0 "PSI1PMAR0,Port station interface 1 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI1PMAR1,Port station interface 1 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x8 "PSI1VLANR,Port station interface 1 VLAN register" bitfld.long 0x8 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x8 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x8 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x8 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x8 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x8 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x8 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x8 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2090++0xB line.long 0x0 "PSI1CFGR0,Port station interface 1 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" line.long 0x4 "PSI1CFGR1,Port station interface 1 configuration register 1" bitfld.long 0x4 28.--30. "TC7_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 7 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "TC6_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 6 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "TC5_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 5 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "TC4_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 4 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "TC3_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 3 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "TC2_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 2 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "TC1_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 1 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "TC0_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 0 to set transmit traffic class." "0,1,2,3,4,5,6,7" line.long 0x8 "PSI1CFGR2,Port station interface 1 configuration register 2" hexmask.long.byte 0x8 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x20B0++0x7 line.long 0x0 "PSI1VMAFCFGR,Port station interface 1 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI1VLANFCFGR,Port station interface 1 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x20D0++0x17 line.long 0x0 "PSI1UMHFR0,Port station interface 1 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI1UMHFR1,Port station interface 1 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI1MMHFR0,Port station interface 1 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI1MMHFR1,Port station interface 1 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI1VHFR0,Port station interface 1 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI1VHFR1,Port station interface 1 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." group.long 0x2100++0xB line.long 0x0 "PSI2PMAR0,Port station interface 2 primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PSI2PMAR1,Port station interface 2 primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x8 "PSI2VLANR,Port station interface 2 VLAN register" bitfld.long 0x8 31. "E,0 SI-based VLAN is disabled" "0,1" bitfld.long 0x8 28.--29. "RXTAGA,Receive VLAN Tag Action Note: this field is only valid if E=1 and PSIaCFGR0[VTE]=0" "0,1,2,3" newline bitfld.long 0x8 24. "TXVAM,Transmit VLAN Aware Mode Note: this field is only valid if E=1 and PSIaCFGR0[SIVIE]=0" "0,1" hexmask.long.byte 0x8 20.--23. 1. "TXTAGR,Transmit Tag Rejection Criteria xxx1: Reject Untagged xx1x: Reject Priority Tagged x1xx: Reject Single Tagged 1xxx: Reject Double Tagged (frame contains 2 or more tags) Rejected frames results in a 'VLAN not allowed' error code in the transmit.." newline bitfld.long 0x8 16.--17. "TPID,Tag protocol identifier 00 Standard C-VLAN 0x8100 01 Standard S-VLAN 0x88A8 10 Custom VLAN as defined by CVLANR1[ETYPE]" "0,1,2,3" bitfld.long 0x8 13.--15. "PCP,Priority code point A 3-bit field which refers to the IEEE 802" "?,?,?,3: bit field which refers to the IEEE 802,?,?,?,?" newline bitfld.long 0x8 12. "DEI,Drop eligible indicator May be used separately or in conjunction with PCP to indicate frames eligible to be dropped in the presence of congestion" "0,1" hexmask.long.word 0x8 0.--11. 1. "VID,VLAN identifier The VLAN identifier is a 12-bit field specifying the VLAN to which the frame belongs" group.long 0x2110++0xB line.long 0x0 "PSI2CFGR0,Port station interface 2 configuration register 0" hexmask.long.byte 0x0 28.--31. 1. "SIBW,Station interface traffic class bandwidth weight Frames are selected for transmission between station interfaces based on a per traffic class basis using the Weighted Fair Bandwidth Sharing algorithm" hexmask.long.byte 0x0 24.--27. 1. "SIVC,Station interface VLAN control Determines which VLAN Ethertypes can be inserted by the SI driver (e" newline hexmask.long.byte 0x0 16.--22. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI Range: 0" bitfld.long 0x0 15. "ASE,Anti-spoofing enable When set (b1) source MAC address used by SI is compared against the primary MAC address" "0,1" newline bitfld.long 0x0 14. "SIVIE,Enable Software VLAN Insertion When set (b1) enables insertion of the SI-based VLAN into frames sent by this SI" "0,1" bitfld.long 0x0 13. "VASE,VLAN Anti-spoofing enable When set (b1) any user VLAN tag (in the BD or in the frame data) is compared against the SI filtering VLAN IDs" "0,1" newline bitfld.long 0x0 12. "VTE,Enable VLAN tag extract When set (b1) controls whether SI-based VLAN tag is removed from the frame before delivery to the SI" "0,1" bitfld.long 0x0 11. "SPE,Enable Source pruning When set (b1) MAC source pruning is enabled." "0,1" newline hexmask.long.byte 0x0 0.--6. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI Range: 0" line.long 0x4 "PSI2CFGR1,Port station interface 2 configuration register 1" bitfld.long 0x4 28.--30. "TC7_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 7 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "TC6_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 6 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "TC5_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 5 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "TC4_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 4 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "TC3_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 3 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "TC2_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 2 to set transmit traffic class." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "TC1_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 1 to set transmit traffic class." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "TC0_MAP,Traffic class mapping from PRIO2TCMR0 Maps the VSI traffic class 0 to set transmit traffic class." "0,1,2,3,4,5,6,7" line.long 0x8 "PSI2CFGR2,Port station interface 2 configuration register 2" hexmask.long.byte 0x8 0.--5. 1. "NUM_MSIX,Number of MSI-X" group.long 0x2130++0x7 line.long 0x0 "PSI2VMAFCFGR,Port station interface 2 VSI MAC address filtering configuration register" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI" line.long 0x4 "PSI2VLANFCFGR,Port station interface 2 VLAN filtering configuration register" hexmask.long.byte 0x4 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI" group.long 0x2150++0x17 line.long 0x0 "PSI2UMHFR0,Port station interface 2 unicast MAC hash filter register 0" hexmask.long 0x0 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x4 "PSI2UMHFR1,Port station interface 2 unicast MAC hash filter register 1" hexmask.long 0x4 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of unicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x8 "PSI2MMHFR0,Port station interface 2 multicast MAC hash filter register 0" hexmask.long 0x8 0.--31. 1. "MAC_HASH_FLT_LOW,Lower 32-bits (31-0) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0xC "PSI2MMHFR1,Port station interface 2 multicast MAC hash filter register 1" hexmask.long 0xC 0.--31. 1. "MAC_HASH_FLT_HIGH,Upper 32-bits (63-32) of multicast MAC hash filter table indexed by unicast MAC address hash." line.long 0x10 "PSI2VHFR0,Port station interface 2 VLAN hash filter register 0" hexmask.long 0x10 0.--31. 1. "VLAN_HASH_FLT_LOW,Lower 32-bits (31-0) of VLAN hash filter table indexed by VLAN hash." line.long 0x14 "PSI2VHFR1,Port station interface 2 VLAN hash filter register 1" hexmask.long 0x14 0.--31. 1. "VLAN_HASH_FLT_HIGH,Upper 32-bits (63-32) of VLAN hash filter table indexed by VLAN hash." tree.end tree "ENETC2_COMMON" base ad:0x4CD10000 rgroup.long 0x1000++0x7 line.long 0x0 "IPCAPR,Ingress port capability register" hexmask.long.byte 0x0 16.--19. 1. "NUM_VQMP,Specifies the number a of receive VLAN PCP/DE to QoS mapping profiles supported; see registers VLANIPVMPaR0/1 and VLANDRMPaR where a={0" hexmask.long.byte 0x0 8.--12. 1. "SDU,Indicates support for various PDU/SDUs (Protocol/Service Data Unit) definitions." newline bitfld.long 0x0 2. "ISID,Ingress Stream Identification functionality is supported if set. See ISIDCAPR for more info." "0,1" bitfld.long 0x0 1. "IPFLT,Ingress Port Filtering is supported (i" "0,1" newline bitfld.long 0x0 0. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" line.long 0x4 "EPCAPR,Egress port capability register" hexmask.long.byte 0x4 8.--12. 1. "SDU,Indicates support for various PDU/SDUs (Protocol/Service Data Unit) definitions." rgroup.long 0x1010++0x3 line.long 0x0 "OSR,Operational state register" bitfld.long 0x0 1. "ITM_STATE,Indicates the index table memory (common memory) operational state" "0,1" bitfld.long 0x0 0. "STATE,Indicates the function's operational state 0: Function is operationally ready" "0: Function is operationally ready,?" group.long 0x1040++0x7 line.long 0x0 "CMECR,Correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "CMESR,Correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" newline hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x104C++0x3 line.long 0x0 "CMECTR,Correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0x1060++0x3 line.long 0x0 "UNMACECR,Uncorrectable non-fatal MAC error configuration register" bitfld.long 0x0 0. "PORT0,Report disable port" "0,1" rgroup.long 0x1064++0x3 line.long 0x0 "UNMACESR,Uncorrectable non-fatal MAC error status register" bitfld.long 0x0 0. "PORT0,Port MAC error" "0,1" group.long 0x1090++0x7 line.long 0x0 "UNMECR,Uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "UNMESR0,Uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x1098++0x7 line.long 0x0 "UNMESR1,Uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "UNMECTR,Uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0x10A0++0x7 line.long 0x0 "UFMECR,Uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "UFMESR0,Uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" newline hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" newline hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0x10A8++0x3 line.long 0x0 "UFMESR1,Uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x10D0++0x3 line.long 0x0 "MIRR,MAC interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt was generated by the MAC" "0,1" group.long 0x10D4++0x3 line.long 0x0 "MMSIVR,MAC MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" rgroup.long 0x10D8++0x3 line.long 0x0 "PCSIRR,PCS interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt was generated by the PCS" "0,1" group.long 0x10DC++0x3 line.long 0x0 "PCSMSIVR,PCS MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" rgroup.long 0x10E0++0x3 line.long 0x0 "IMDIOIRR,Internal MDIO interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt is pending by Ethernet MAC MDIO due to completion of an MDIO access" "0,1" group.long 0x10E4++0x3 line.long 0x0 "IMDIOMSIVR,Internal MDIO MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" rgroup.long 0x10E8++0x3 line.long 0x0 "EMDIOIRR,External MDIO interrupt reason register" bitfld.long 0x0 0. "PORT0,When set (0b1) a port interrupt is pending by EMDIO controller due to completion of a PHY MDIO access" "0,1" group.long 0x10EC++0x3 line.long 0x0 "EMDIOMSIVR,External MDIO MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Index into MSI-X address/data table" group.long 0x1200++0x7 line.long 0x0 "CVLANR1,Custom VLAN Ethertype register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "CVLANR2,Custom VLAN Ethertype register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x1220++0x3 line.long 0x0 "DOSL2CR,DoS L2 configuration register" bitfld.long 0x0 1. "MSAMCC,If set received frames with Multicast SMAC address are discarded." "0,1" bitfld.long 0x0 0. "SAMEADDR,If set received frames with SMAC = DMAC are discarded" "0,1" group.long 0x1300++0xB line.long 0x0 "VLANIPVMP0R0,VLAN to IPV mapping profile 0 register 0" bitfld.long 0x0 28.--30. "PCP_DEI_7,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "PCP_DEI_6,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 20.--22. "PCP_DEI_5,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "PCP_DEI_4,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 12.--14. "PCP_DEI_3,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "PCP_DEI_2,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "PCP_DEI_1,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PCP_DEI_0,IPV value used for receive data path." "0,1,2,3,4,5,6,7" line.long 0x4 "VLANIPVMP0R1,VLAN to IPV mapping profile 0 register 1" bitfld.long 0x4 28.--30. "PCP_DEI_15,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "PCP_DEI_14,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 20.--22. "PCP_DEI_13,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PCP_DEI_12,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 12.--14. "PCP_DEI_11,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 8.--10. "PCP_DEI_10,IPV value used for receive data path." "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 4.--6. "PCP_DEI_9,IPV value used for receive data path." "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--2. "PCP_DEI_8,IPV value used for receive data path." "0,1,2,3,4,5,6,7" line.long 0x8 "VLANDRMP0R,VLAN to DR mapping profile 0 register" bitfld.long 0x8 30.--31. "PCP_DEI_15,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 28.--29. "PCP_DEI_14,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 26.--27. "PCP_DEI_13,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 24.--25. "PCP_DEI_12,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 22.--23. "PCP_DEI_11,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 20.--21. "PCP_DEI_10,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 18.--19. "PCP_DEI_9,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 16.--17. "PCP_DEI_8,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 14.--15. "PCP_DEI_7,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 12.--13. "PCP_DEI_6,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 10.--11. "PCP_DEI_5,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 8.--9. "PCP_DEI_4,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 6.--7. "PCP_DEI_3,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 4.--5. "PCP_DEI_2,DR value used for receive data path." "0,1,2,3" newline bitfld.long 0x8 2.--3. "PCP_DEI_1,DR value used for receive data path." "0,1,2,3" bitfld.long 0x8 0.--1. "PCP_DEI_0,DR value used for receive data path." "0,1,2,3" rgroup.long 0x1640++0xB line.long 0x0 "IPFCAPR,Ingress port filter capability register" bitfld.long 0x0 3. "WOL,When set has ability to trigger a Wake on LAN event." "0,1" bitfld.long 0x0 2. "FWD_SI,When set has ability to forward to a set of Station Interfaces (SIs)." "0,1" newline bitfld.long 0x0 1. "ISID,When set has ability to identify an Ingress Stream. See ISIDCAPR for more info." "0,1" bitfld.long 0x0 0. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" line.long 0x4 "IPFTCAPR,Ingress port filter table capability register" bitfld.long 0x4 28.--29. "WORD_SIZE,Word size in bits of the ternary memory. 0: 48 bits 1-3: Reserved" "?,?,?,3: Reserved" hexmask.long.byte 0x4 24.--27. 1. "ENTRY_MAX_WORDS,Maximum number of consecutive words which can form a TM Entry" newline hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which Configuration Access Methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" bitfld.long 0x4 16. "MGMT,Indicates if table entries are managed by software driver or by hardware" "0,1" newline hexmask.long.word 0x4 0.--15. 1. "NUM_WORDS,Number of ternary memory words supported" line.long 0x8 "IPFTMOR,Ingress port filter table memory operational register" hexmask.long.word 0x8 0.--15. 1. "NUM_WORDS,Number of words in-use." rgroup.long 0x1800++0x3 line.long 0x0 "ITMCAPR,Index table memory capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1: Reserved" "0: Common memory,1: Reserved,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 bytes 1-3: Reserved" "?,?,?,3: Reserved" newline hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of Words in the Index table memory" rgroup.long 0x1810++0x7 line.long 0x0 "RPCAPR,Rate policer capability register" bitfld.long 0x0 1. "CM,Color Mode capability 0: Support Color Blind mode only 1: Support Color Blind and Color Aware modes" "0: Support Color Blind mode only,1: Support Color Blind and Color Aware modes" bitfld.long 0x0 0. "TRTCM,Two-Rate Thee-Color Marker supported per MEF 10.3 standard." "0,1" line.long 0x4 "RPITCAPR,Rate policer index table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x4 0.--13. 1. "NUM_ENTRIES,The number of entries assigned to this table. Reset value is specified by ROUNDDOWN(RPITMAR/4)." group.long 0x1818++0x3 line.long 0x0 "RPITMAR,Rate policer index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" rgroup.long 0x181C++0x3 line.long 0x0 "RPITOR,Rate policer index table operational register" hexmask.long.word 0x0 0.--13. 1. "NUM_ENTRIES,The number of entries in-use by this table." rgroup.long 0x1824++0x3 line.long 0x0 "ISCITCAPR,Ingress stream counter index table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table. The reset value of this field comes from ISCITMAR." group.long 0x1828++0x3 line.long 0x0 "ISCITMAR,Ingress stream counter index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each Entry consist of 1 word." rgroup.long 0x182C++0xB line.long 0x0 "ISCITOR,Ingress stream counter index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries allocated / in-use by this table." line.long 0x4 "ISCAPR,Ingress stream capability register" bitfld.long 0x4 9. "FWD,When set can specify a set of destination to forward the frame." "0,1" bitfld.long 0x4 5. "MAXSDU,When set maximum SDU check is supported. Various SDUs supported are specified in IPCAPR." "0,1" newline bitfld.long 0x4 4. "RP,When set has ability to specify Rate Policer function. See RPCAPR for more info." "0,1" bitfld.long 0x4 3. "SG,When set Stream Gating is supported. See SGCAPR for more info." "0,1" line.long 0x8 "ISITCAPR,Ingress stream index table capability register" hexmask.long.byte 0x8 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x8 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table. The reset value of this field comes from ISITMAR." group.long 0x1838++0x3 line.long 0x0 "ISITMAR,Ingress stream index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each Entry consist of 1 word." rgroup.long 0x183C++0x3 line.long 0x0 "ISITOR,Ingress stream index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries in-use by this table." rgroup.long 0x1860++0x7 line.long 0x0 "SGCAPR,Stream gate capability register" bitfld.long 0x0 4. "GLC_CTD,Each Gate Control List Entry supports configurable CTD (Cut-Through Disable state)." "0,1" bitfld.long 0x0 3. "GLC_IPV,Each Gate Control List Entry supports configurable IPV." "0,1" newline bitfld.long 0x0 2. "GLC_IO,Each Gate Control List Entry support Interval Max Octet check." "0,1" bitfld.long 0x0 1. "GLC_GC,Support configurable option indicating if GCL's Gate Check is from SFD only or SFD until EOF" "0,1" newline bitfld.long 0x0 0. "GLC_AO,Support Administrative and Operational Gate Control List." "0,1" line.long 0x4 "SGIITCAPR,Stream gate instance index table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x4 0.--15. 1. "NUM_ENTRIES,The number of entries assigned to this table." group.long 0x1868++0x3 line.long 0x0 "SGIITMAR,Stream gate instance index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table. Each entry occupies 1 word." rgroup.long 0x186C++0x3 line.long 0x0 "SGIITOR,Stream gate instance index table operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,The number of entries allocated / in-use by this table." rgroup.long 0x1874++0x3 line.long 0x0 "SGCLITCAPR,Stream gate control list index table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" group.long 0x1878++0x3 line.long 0x0 "SGCLITMAR,Stream gate control list index table memory allocation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words from index table memory assigned to this table" rgroup.long 0x187C++0x3 line.long 0x0 "SGCLTMOR,Stream gate control list table memory operational register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Number of words in-use." rgroup.long 0x18D4++0x3 line.long 0x0 "TGSTCAPR,Time gate scheduling table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSION,Version bitmap indicating the Table version supported." hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words available to this Time Gate Scheduling table" rgroup.long 0x18DC++0x3 line.long 0x0 "TGSTMOR,Time gate scheduling table memory operation register" hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,The number of words in-use." rgroup.long 0x1900++0x7 line.long 0x0 "HTMCAPR,Hash table memory capability register" bitfld.long 0x0 30.--31. "MLOC,Indicates memory location of this table 0: Common memory 1: Reserved" "0: Common memory,1: Reserved,?,?" bitfld.long 0x0 28.--29. "WORD_SIZE,Word size in bytes. 0: 24 bytes 1-3: Reserved" "?,?,?,3: Reserved" newline hexmask.long.word 0x0 0.--15. 1. "NUM_WORDS,Maximum number of Words allotted to Exact Match hash table from the Common Memory's Shared region" line.long 0x4 "HTMOR,Hash table memory operational register" hexmask.long.word 0x4 16.--31. 1. "WATERMARK,High WaterMark of Words allocated. Value reset to AMOUNT when read." hexmask.long.word 0x4 0.--15. 1. "AMOUNT,Number of Words in use by this function which has been allocated by the various hash tables." rgroup.long 0x1910++0x7 line.long 0x0 "ISIDCAPR,Ingress stream identification capability register" bitfld.long 0x0 17. "ETHFT,When set support Ethernet Frame Type" "0,1" bitfld.long 0x0 16. "UFT,When set support Unknown Frame Type" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "MAX_KSIZE,Maximum Key Size in bytes which can be constructed using the frame's fields." bitfld.long 0x0 2.--4. "NUM_PF,Number of configurable Payload Fields supported" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0.--1. "NUM_KC,Number of Exact Match Key Construction Instances supported for Ingress Stream Identification" "0,1,2,3" line.long 0x4 "ISIDHTCAPR,Ingress stream identification hash table capability register" hexmask.long.byte 0x4 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: EntryId Match xx1x: Exact Match Key Element Match x1xx: Ternary Match Key Element Match 1xxx: Search" rgroup.long 0x1920++0x3 line.long 0x0 "ISIDKC0OR,Ingress stream identification key construction 0 operational register" bitfld.long 0x0 31. "EN,Operational state of this key construction register: 0: Disabled: Exact Match Lookup must not utilize this key construction" "0: Disabled: Exact Match Lookup must not utilize..,?" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,Indicates the number of Ingress Stream Identification i" group.long 0x1924++0x3 line.long 0x0 "ISIDKC0CR0,Ingress stream identification key construction 0 configuration register 0" bitfld.long 0x0 10. "ETP,If set the 2 Byte Ethertype field is included in the Key" "0,1" bitfld.long 0x0 9. "SQTP,Sequence Tag Present If set to 1 a 1-byte frame attribute code point is included in the key indicating whether there is no R-TAG/HSR tag 802" "?,1: byte frame attribute code point is included in.." newline bitfld.long 0x0 8. "IPCPP,If set inner VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 7. "IVIDP,If set inner VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 6. "OPCPP,If set outer VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 5. "OVIDP,If set outer VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 4. "SMACP,If set 6 bytes of source MAC address is included in the key." "0,1" bitfld.long 0x0 3. "DMACP,If set 6 bytes of destination MAC address is included in the key." "0,1" newline bitfld.long 0x0 1. "PORTP,If set source port is included in the key" "0,1" bitfld.long 0x0 0. "VALID,When set this Key Construction is valid" "0,1" group.long 0x1930++0xF line.long 0x0 "ISIDKC0PF0CR,Ingress stream identification key construction 0 payload field 0 configuration register" bitfld.long 0x0 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x0 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x0 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x4 "ISIDKC0PF1CR,Ingress stream identification key construction 0 payload field 1 configuration register" bitfld.long 0x4 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x4 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x4 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x8 "ISIDKC0PF2CR,Ingress stream identification key construction 0 payload field 2 configuration register" bitfld.long 0x8 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x8 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x8 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0xC "ISIDKC0PF3CR,Ingress stream identification key construction 0 payload field 3 configuration register" bitfld.long 0xC 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0xC 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0xC 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" rgroup.long 0x1940++0x3 line.long 0x0 "ISIDKC1OR,Ingress stream identification key construction 1 operational register" bitfld.long 0x0 31. "EN,Operational state of this key construction register: 0: Disabled: Exact Match Lookup must not utilize this key construction" "0: Disabled: Exact Match Lookup must not utilize..,?" hexmask.long.word 0x0 0.--15. 1. "NUM_ENTRIES,Indicates the number of Ingress Stream Identification i" group.long 0x1944++0x3 line.long 0x0 "ISIDKC1CR0,Ingress stream identification key construction 1 configuration register 0" bitfld.long 0x0 10. "ETP,If set the 2 Byte Ethertype field is included in the Key" "0,1" bitfld.long 0x0 9. "SQTP,Sequence Tag Present If set to 1 a 1-byte frame attribute code point is included in the key indicating whether there is no R-TAG/HSR tag 802" "?,1: byte frame attribute code point is included in.." newline bitfld.long 0x0 8. "IPCPP,If set inner VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 7. "IVIDP,If set inner VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 6. "OPCPP,If set outer VLAN header's PCP field is included in the key" "0,1" bitfld.long 0x0 5. "OVIDP,If set outer VLAN ID is included in the key" "0,1" newline bitfld.long 0x0 4. "SMACP,If set 6 bytes of source MAC address is included in the key." "0,1" bitfld.long 0x0 3. "DMACP,If set 6 bytes of destination MAC address is included in the key." "0,1" newline bitfld.long 0x0 1. "PORTP,If set source port is included in the key" "0,1" bitfld.long 0x0 0. "VALID,When set this Key Construction is valid" "0,1" group.long 0x1950++0xF line.long 0x0 "ISIDKC1PF0CR,Ingress stream identification key construction 1 payload field 0 configuration register" bitfld.long 0x0 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x0 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x0 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x0 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x4 "ISIDKC1PF1CR,Ingress stream identification key construction 1 payload field 1 configuration register" bitfld.long 0x4 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x4 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x4 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0x8 "ISIDKC1PF2CR,Ingress stream identification key construction 1 payload field 2 configuration register" bitfld.long 0x8 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0x8 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x8 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0x8 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0x8 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" line.long 0xC "ISIDKC1PF3CR,Ingress stream identification key construction 1 payload field 3 configuration register" bitfld.long 0xC 20.--22. "LBMASK,Payload Last Byte Mask: Number of least significant bits from the last payload key byte to mask." "0,1,2,3,4,5,6,7" bitfld.long 0xC 16.--18. "FBMASK,Payload First Byte Mask: Number of most significant bits of first payload key byte to mask." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--14. 1. "BYTE_OFFSET,Payload Byte Offset where field extraction begins" hexmask.long.byte 0xC 1.--4. 1. "NUM_BYTES,The NUM_BYTES field is used to specify the size of the payload key field as follows: Size of the payload key field = NUM_BYTES + 1; range is 1 to 16 bytes" newline bitfld.long 0xC 0. "PFP,Payload field Present If set to 1 NUM_BYTES+1 consecutive bytes starting at BYTE_OFFSET are included in the Key" "0,1" rgroup.long 0x1A00++0x7 line.long 0x0 "ISFHTCAPR,Ingress stream filter hash table capability register" hexmask.long.byte 0x0 20.--23. 1. "ACCESS_METH,Indicates which configuration access methods are supported: xxx1: Index xx1x: EntryId x1xx: Search 1xxx: Reserved" line.long 0x4 "ISFHTOR,Ingress stream filter hash table operational register" hexmask.long.word 0x4 0.--15. 1. "NUM_ENTRIES,Number of entries in-use by this table." tree.end tree.end tree "NETC_PORT" tree "ENETC0_PORT" base ad:0x4CC14000 rgroup.long 0x0++0xB line.long 0x0 "PCAPR,Port capability register" bitfld.long 0x0 29. "CBS,Credit Based Shaping" "0,1" bitfld.long 0x0 28. "TGS,Time Gate Scheduling" "0,1" hexmask.long.byte 0x0 12.--15. 1. "NUM_TC,Number of Traffic Classes (TCs) supported Formula: NUM_TC+1" bitfld.long 0x0 4. "LINK_TYPE,Indicates the link type 0 External Link 1 Pseudo Link" "0,1" line.long 0x4 "PMCAPR,Port MAC capability register" hexmask.long.byte 0x4 24.--27. 1. "MII_PROT,Indicates the MII protocol supported" bitfld.long 0x4 9.--10. "FP,Indicates if frame preemption is supported" "0,1,2,3" bitfld.long 0x4 8. "HD,Indicates if Half Duplex Mode is supported on this link" "0,1" bitfld.long 0x4 4.--5. "EFPAD,Egress frame padding capability indicates if egress frames smaller than 64B are padded with zeroes" "0,1,2,3" newline bitfld.long 0x4 0.--2. "MAC_VAR,MAC Variant" "0,1,2,3,4,5,6,7" line.long 0x8 "PIOCAPR,Port I/O capability register" bitfld.long 0x8 31. "REVMII,Reverse Mode Device Configuration" "0,1" bitfld.long 0x8 30. "REVMII_RATE,RevMII MII rate" "0,1" bitfld.long 0x8 28. "EMDIO,External MDIO supported." "0,1" hexmask.long.byte 0x8 24.--27. 1. "IO_VAR,IO Variants supported" newline hexmask.long.word 0x8 0.--15. 1. "PCS_PROT,PCS protocols supported" group.long 0x10++0x3 line.long 0x0 "PCR,Port configuration register" hexmask.long.word 0x0 16.--29. 1. "PSPEED,Transmit Port Speed The speed in 10Mbps increments at which the port is assumed to be running for scheduling purposes" bitfld.long 0x0 8. "TIMER_CS,Timer Clock Selection: On receive this field determines which of the two Rx timestamps (synchronized or free running) is reported to the host" "0,1" bitfld.long 0x0 4. "L2DOSE,L2 Ethernet DoS Protection Enable 0 L2 IP DoS protection is disabled" "0,1" bitfld.long 0x0 0. "HDR_FMT,Indicates the frame format received/transmitted on the port 0 Ethernet frame format 1 Reserved" "0,1" group.long 0x20++0x7 line.long 0x0 "PMAR0,Port MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PMAR1,Port MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" group.long 0x50++0x7 line.long 0x0 "PTAR,Port TPID acceptance register" hexmask.long.byte 0x0 4.--7. 1. "IVTPIDL,Outer VLAN TPID List : bitmap identifying which TPIDs are acceptable as Inner VLAN tag xxx1 Standard C-VLAN 0x8100 xx1x Standard S-VLAN 0x88A8 x1xx Custom VLAN as defined by CVLANR1[ETYPE] 1xxx Custom VLAN as defined by CVLANR2[ETYPE]" hexmask.long.byte 0x0 0.--3. 1. "OVTPIDL,Outer VLAN TPID List : bitmap identifying which TPIDs are acceptable as Outer VLAN tag xxx1 Standard C-VLAN 0x8100 xx1x Standard S-VLAN 0x88A8 x1xx Custom VLAN as defined by CVLANR1[ETYPE] 1xxx Custom VLAN as defined by CVLANR2[ETYPE]" line.long 0x4 "PQOSMR,Port QoS mode register" hexmask.long.byte 0x4 16.--19. 1. "VQMP,Mapping profile index" bitfld.long 0x4 4.--6. "DIPV,Default IPV Sets the default IPV for the port." "0,1,2,3,4,5,6,7" bitfld.long 0x4 2.--3. "DDR,Default DR Sets the default DR for the port." "0,1,2,3" bitfld.long 0x4 1. "VE,VLAN enable 0 Defaults are used 1 Enables use of VLAN info to determine IPV and DR (based on VLANIPVMPaR0/1 and VLANDRMPaR)" "0,1" newline bitfld.long 0x4 0. "VS,VLAN tag select: 0 Inner VLAN tag will be used if VE is set 1 Outer VLAN tag will be used if VE is set" "0,1" group.long 0x80++0x7 line.long 0x0 "PPCR,Port parser configuration register" hexmask.long.byte 0x0 25.--29. 1. "L4PFS,L4 payload fields size in bytes This is the largest L4 Payload size used by any table lookup key by this port" bitfld.long 0x0 24. "L4HFP,L4 Header fields present 0 No L4 header present" "0,1" hexmask.long.byte 0x0 17.--21. 1. "L3PFS,L3 payload fields size in bytes This is the largest L3 Payload size used by any table lookup key by this port" bitfld.long 0x0 16. "L3HFP,L3 header fields present 0 No L3 header present" "0,1" newline hexmask.long.byte 0x0 9.--13. 1. "L2PFS,L2 payload fields size in bytes This is the largest L2 payload size used by any table lookup key by this port" hexmask.long.byte 0x0 1.--5. 1. "L1PFS,Unused" line.long 0x4 "PIPFCR,Port ingress port filter configuration register" bitfld.long 0x4 0. "EN,0 Ingress Port Filter table lookup is disabled for this port 1 Ingress Port Filter table lookup is enabled for this port" "0,1" group.long 0xA0++0x3 line.long 0x0 "PSGCR,Port stream gate configuration register" bitfld.long 0x0 31. "OGC,Stream Gate Open Gate Check mode: 0 Gate open check passes if the Start of Frame (SFD) is within the open gate interval 1 Gate open check passes if the entire frame is within the open gate interval" "0,1" hexmask.long.tbyte 0x0 0.--23. 1. "PDELAY,Link propagation delay in nanoseconds" group.long 0x100++0x3 line.long 0x0 "POR,Port operational register" bitfld.long 0x0 1. "RXDIS,Rx Disable" "0,1" bitfld.long 0x0 0. "TXDIS,Tx Disable" "0,1" rgroup.long 0x104++0x3 line.long 0x0 "PSR,Port status register" bitfld.long 0x0 1. "RX_BUSY,Receive busy" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" group.long 0x108++0xB line.long 0x0 "PRXSDUOR,Port receive SDU overhead register" hexmask.long.byte 0x0 8.--12. 1. "MACSEC_BCO,MACSec byte count overhead" hexmask.long.byte 0x0 0.--4. 1. "PPDU_BCO,PPDU Byte count overhead" line.long 0x4 "PTXSDUOR,Port transmit SDU overhead register" hexmask.long.byte 0x4 8.--12. 1. "MACSEC_BCO,MACSec byte count overhead" hexmask.long.byte 0x4 0.--4. 1. "PPDU_BCO,PPDU Byte count overhead" line.long 0x8 "PTGSCR,Port time gate scheduling control register" bitfld.long 0x8 31. "TGE,Time gating enable Port enable bit for time gate scheduling" "0,1" rgroup.long 0x114++0xB line.long 0x0 "PTGAGLSR,Port time gate scheduling admin gate list status register" bitfld.long 0x0 1. "CFG_PEND,Administrative gate control list pending 0 No administrative gate control list is configured 1 Administrative gate control list is pending (configured but not installed yet)" "0,1" bitfld.long 0x0 0. "TG,Time gated (state of the operational gate control list) 0 No operational gate control list is active 1 Operational gate control list is active" "0,1" line.long 0x4 "PTGAGLLR,Port time gate scheduling admin gate list length register" hexmask.long.word 0x4 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate control list length (number of entries)" line.long 0x8 "PTGOGLLR,Port time gating operational gate list length register" hexmask.long.word 0x8 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operational gate control list length (number of entries)" group.long 0x120++0x3 line.long 0x0 "PTGSATOR,Port time gate scheduling advance time offset register" hexmask.long.word 0x0 0.--15. 1. "ADV_TIME_OFFSET,Advance time offset This field specifies the amount of time to advance the IEEE 1588 time scale used by the time-based scheduler to adjust for the latency encountered across the MAC plus if needed delays outside of NETC (e" rgroup.long 0x124++0x7 line.long 0x0 "PTGSHAR,Port time gate scheduling hold advance register" hexmask.long.word 0x0 0.--15. 1. "HOLDADVANCE,This field indicates the amount of time prior to the Set-And-Hold-MAC time slot for asserting the Hold" line.long 0x4 "PTGSRAR,Port time gate scheduling release advance register" hexmask.long.word 0x4 0.--15. 1. "RELEASEADVANCE,This field indicates the amount of time prior to the Set-And-Release-MAC time slot for asserting the Release" group.long 0x12C++0x3 line.long 0x0 "PTGSHCR,Port time gate scheduling hold configuration register" hexmask.long.tbyte 0x0 0.--19. 1. "HOLD_SKEW,Hold-Skew in nanoseconds" group.long 0x134++0x7 line.long 0x0 "PFPCR,Port frame preemption configuration register" bitfld.long 0x0 7. "FPE_TC7,Frame preemption enable for traffic class 7 0 Disabled" "0,1" bitfld.long 0x0 6. "FPE_TC6,Frame preemption enable for traffic class 6 0 Disabled" "0,1" bitfld.long 0x0 5. "FPE_TC5,Frame preemption enable for traffic class 5 0 Disabled" "0,1" bitfld.long 0x0 4. "FPE_TC4,Frame preemption enable for traffic class 4 0 Disabled" "0,1" newline bitfld.long 0x0 3. "FPE_TC3,Frame preemption enable for traffic class 3 0 Disabled" "0,1" bitfld.long 0x0 2. "FPE_TC2,Frame preemption enable for traffic class 2 0 Disabled" "0,1" bitfld.long 0x0 1. "FPE_TC1,Frame preemption enable for traffic class 1 0 Disabled" "0,1" bitfld.long 0x0 0. "FPE_TC0,Frame preemption enable for traffic class 0 0 Disabled" "0,1" line.long 0x4 "PDGSR,Port default gate state register" bitfld.long 0x4 7. "DGS_TC7,Default gate state for traffic class 7 0 Closed 1 Open" "0,1" bitfld.long 0x4 6. "DGS_TC6,Default gate state for traffic class 6 0 Closed 1 Open" "0,1" bitfld.long 0x4 5. "DGS_TC5,Default gate state for traffic class 5 0 Closed 1 Open" "0,1" bitfld.long 0x4 4. "DGS_TC4,Default gate state for traffic class 4 0 Closed 1 Open" "0,1" newline bitfld.long 0x4 3. "DGS_TC3,Default gate state for traffic class 3 0 Closed 1 Open" "0,1" bitfld.long 0x4 2. "DGS_TC2,Default gate state for traffic class 2 0 Closed 1 Open" "0,1" bitfld.long 0x4 1. "DGS_TC1,Default gate state for traffic class 1 0 Closed 1 Open" "0,1" bitfld.long 0x4 0. "DGS_TC0,Default gate state for traffic class 0 0 Closed 1 Open" "0,1" rgroup.long 0x1C0++0x3 line.long 0x0 "PRXDCR,Port Rx discard count register" hexmask.long 0x0 0.--31. 1. "COUNT,Number of receive frames discarded" group.long 0x1C8++0x7 line.long 0x0 "PRXDCRR0,Port Rx discard count reason register 0" eventfld.long 0x0 17. "NODESTDR,No Destination Discard Reason" "0,1" eventfld.long 0x0 14. "L2DOSDR,Layer 2 Denial of Service Discard Reason Occurs if a packet is discarded due to L2DOS protection" "0,1" eventfld.long 0x0 13. "SIFDR,Station Interface Filter Discard Reason Occurs if packet is discarded by the L2 Filtering function" "0,1" eventfld.long 0x0 12. "ECCEDR,ECC Error Discard Reason" "0,1" newline eventfld.long 0x0 11. "ITEDR,Invalid Table Entry Discard Reason Table entry ID reference is not found in the table (entry has not been added to the table) Table entry ID is outside of its table allocation range Cleared when written to 1" "0,1" eventfld.long 0x0 8. "MSDUEDR,Ingress Stream Maximum Service Data Unit Exceeded Discard Reason Occurs if packet received is greater than the Maximum SDU size configured for the stream" "0,1" eventfld.long 0x0 7. "SGOEDR,Stream Gate Octet Exceeded Discard Reason Frame dropped due to octet count exceeded maximum specified for the open gate interval Cleared when written to 1" "0,1" eventfld.long 0x0 6. "SGCDR,Stream Gate Closed Discard Reason Frame received on this port that is dropped because it didn't pass the stream gate" "0,1" newline eventfld.long 0x0 5. "ISFDR,Ingress Stream Forwarding Discard Reason Occurs if frame is associated with an ingress stream whose Forwarding Action (FA) is equal to discard" "0,1" eventfld.long 0x0 4. "RPDR,Rate Policer Discard Reason" "0,1" eventfld.long 0x0 3. "IPFDR,Ingress Port Filter Discard Reason. Cleared when written to 1." "0,1" eventfld.long 0x0 2. "RXDISDR,Receive disable discard reason due to port being in receive disabled state (POR[RXDIS]=1)" "0,1" newline eventfld.long 0x0 1. "SMREDR,Shared Memory Resource Exhaustion Discard Reason Occurs if Ethernet Rx I/F cannot allocate shared internal buffer memory to store the entire received frame" "0,1" eventfld.long 0x0 0. "PCDR,Pre-Classification Discard Reason Occurs if Parse Classifier Engine (PCE) block does not have any free processing thread to process the received frame" "0,1" line.long 0x4 "PRXDCRR1,Port Rx discard count reason register 1" hexmask.long.byte 0x4 28.--31. 1. "TT,Table type which caused the discard" hexmask.long.word 0x4 0.--15. 1. "ENTRYID,Entry Id who last incremented discard count" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CC14200 ad:0x4CC14220 ad:0x4CC14240 ad:0x4CC14260 ad:0x4CC14280 ad:0x4CC142A0 ad:0x4CC142C0 ad:0x4CC142E0) tree "tct_num[$1]" base $2 group.long ($2+0x8)++0x3 line.long 0x0 "PTCTMSDUR,Port traffic class a transmit maximum SDU register" bitfld.long 0x0 24. "SF_MAXSDU_DIS,When cleared the Tx Max SDU check is performed for Store and Forward frames" "0,1" bitfld.long 0x0 16.--17. "SDU_TYPE,Specifies the type of PDU/SDU (Protocol/Service Data Unit) whose length is being validated as seen on the link" "0,1,2,3" hexmask.long.word 0x0 0.--15. 1. "MAXSDU,Transmit Maximum SDU size in bytes (i" group.long ($2+0x10)++0x7 line.long 0x0 "PTCCBSR0,Port transmit traffic class a credit based shaper register 0" bitfld.long 0x0 31. "CBSE,Credit based shaper enable 0 Disabled 1 Enabled" "0,1" hexmask.long.byte 0x0 0.--6. 1. "BW,Bandwidth Bandwidth allocation is described in percentage units of the port transmit rate and ranging from 0-100 for the credit-based shaper" line.long 0x4 "PTCCBSR1,Port traffic class a credit based shaper register 1" hexmask.long 0x4 0.--31. 1. "HI_CREDIT,hicredit (in credit units) The maximum allowed accumulation of credits when conflicting transfers occur" tree.end repeat.end base ad:0x4CC14000 group.long 0x460++0x3 line.long 0x0 "PISIDCR,Port ingress stream identification configuration register" hexmask.long.word 0x0 16.--31. 1. "ISEID,Default Ingress Stream Entry ID" bitfld.long 0x0 2. "KC1EN,Key Construction 1 Enable" "0,1" bitfld.long 0x0 1. "KC0EN,Key Construction 0 Enable" "0,1" bitfld.long 0x0 0. "KCPAIR,Indicates which Ingress Stream Identification Key Construction pair to use for this port" "0,1" tree.end tree "ENETC1_PORT" base ad:0x4CC94000 rgroup.long 0x0++0xB line.long 0x0 "PCAPR,Port capability register" bitfld.long 0x0 29. "CBS,Credit Based Shaping" "0,1" bitfld.long 0x0 28. "TGS,Time Gate Scheduling" "0,1" hexmask.long.byte 0x0 12.--15. 1. "NUM_TC,Number of Traffic Classes (TCs) supported Formula: NUM_TC+1" bitfld.long 0x0 4. "LINK_TYPE,Indicates the link type 0 External Link 1 Pseudo Link" "0,1" line.long 0x4 "PMCAPR,Port MAC capability register" hexmask.long.byte 0x4 24.--27. 1. "MII_PROT,Indicates the MII protocol supported" bitfld.long 0x4 9.--10. "FP,Indicates if frame preemption is supported" "0,1,2,3" bitfld.long 0x4 8. "HD,Indicates if Half Duplex Mode is supported on this link" "0,1" bitfld.long 0x4 4.--5. "EFPAD,Egress frame padding capability indicates if egress frames smaller than 64B are padded with zeroes" "0,1,2,3" newline bitfld.long 0x4 0.--2. "MAC_VAR,MAC Variant" "0,1,2,3,4,5,6,7" line.long 0x8 "PIOCAPR,Port I/O capability register" bitfld.long 0x8 31. "REVMII,Reverse Mode Device Configuration" "0,1" bitfld.long 0x8 30. "REVMII_RATE,RevMII MII rate" "0,1" bitfld.long 0x8 28. "EMDIO,External MDIO supported." "0,1" hexmask.long.byte 0x8 24.--27. 1. "IO_VAR,IO Variants supported" newline hexmask.long.word 0x8 0.--15. 1. "PCS_PROT,PCS protocols supported" group.long 0x10++0x3 line.long 0x0 "PCR,Port configuration register" hexmask.long.word 0x0 16.--29. 1. "PSPEED,Transmit Port Speed The speed in 10Mbps increments at which the port is assumed to be running for scheduling purposes" bitfld.long 0x0 8. "TIMER_CS,Timer Clock Selection: On receive this field determines which of the two Rx timestamps (synchronized or free running) is reported to the host" "0,1" bitfld.long 0x0 4. "L2DOSE,L2 Ethernet DoS Protection Enable 0 L2 IP DoS protection is disabled" "0,1" bitfld.long 0x0 0. "HDR_FMT,Indicates the frame format received/transmitted on the port 0 Ethernet frame format 1 Reserved" "0,1" group.long 0x20++0x7 line.long 0x0 "PMAR0,Port MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PMAR1,Port MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" group.long 0x50++0x7 line.long 0x0 "PTAR,Port TPID acceptance register" hexmask.long.byte 0x0 4.--7. 1. "IVTPIDL,Outer VLAN TPID List : bitmap identifying which TPIDs are acceptable as Inner VLAN tag xxx1 Standard C-VLAN 0x8100 xx1x Standard S-VLAN 0x88A8 x1xx Custom VLAN as defined by CVLANR1[ETYPE] 1xxx Custom VLAN as defined by CVLANR2[ETYPE]" hexmask.long.byte 0x0 0.--3. 1. "OVTPIDL,Outer VLAN TPID List : bitmap identifying which TPIDs are acceptable as Outer VLAN tag xxx1 Standard C-VLAN 0x8100 xx1x Standard S-VLAN 0x88A8 x1xx Custom VLAN as defined by CVLANR1[ETYPE] 1xxx Custom VLAN as defined by CVLANR2[ETYPE]" line.long 0x4 "PQOSMR,Port QoS mode register" hexmask.long.byte 0x4 16.--19. 1. "VQMP,Mapping profile index" bitfld.long 0x4 4.--6. "DIPV,Default IPV Sets the default IPV for the port." "0,1,2,3,4,5,6,7" bitfld.long 0x4 2.--3. "DDR,Default DR Sets the default DR for the port." "0,1,2,3" bitfld.long 0x4 1. "VE,VLAN enable 0 Defaults are used 1 Enables use of VLAN info to determine IPV and DR (based on VLANIPVMPaR0/1 and VLANDRMPaR)" "0,1" newline bitfld.long 0x4 0. "VS,VLAN tag select: 0 Inner VLAN tag will be used if VE is set 1 Outer VLAN tag will be used if VE is set" "0,1" group.long 0x80++0x7 line.long 0x0 "PPCR,Port parser configuration register" hexmask.long.byte 0x0 25.--29. 1. "L4PFS,L4 payload fields size in bytes This is the largest L4 Payload size used by any table lookup key by this port" bitfld.long 0x0 24. "L4HFP,L4 Header fields present 0 No L4 header present" "0,1" hexmask.long.byte 0x0 17.--21. 1. "L3PFS,L3 payload fields size in bytes This is the largest L3 Payload size used by any table lookup key by this port" bitfld.long 0x0 16. "L3HFP,L3 header fields present 0 No L3 header present" "0,1" newline hexmask.long.byte 0x0 9.--13. 1. "L2PFS,L2 payload fields size in bytes This is the largest L2 payload size used by any table lookup key by this port" hexmask.long.byte 0x0 1.--5. 1. "L1PFS,Unused" line.long 0x4 "PIPFCR,Port ingress port filter configuration register" bitfld.long 0x4 0. "EN,0 Ingress Port Filter table lookup is disabled for this port 1 Ingress Port Filter table lookup is enabled for this port" "0,1" group.long 0xA0++0x3 line.long 0x0 "PSGCR,Port stream gate configuration register" bitfld.long 0x0 31. "OGC,Stream Gate Open Gate Check mode: 0 Gate open check passes if the Start of Frame (SFD) is within the open gate interval 1 Gate open check passes if the entire frame is within the open gate interval" "0,1" hexmask.long.tbyte 0x0 0.--23. 1. "PDELAY,Link propagation delay in nanoseconds" group.long 0x100++0x3 line.long 0x0 "POR,Port operational register" bitfld.long 0x0 1. "RXDIS,Rx Disable" "0,1" bitfld.long 0x0 0. "TXDIS,Tx Disable" "0,1" rgroup.long 0x104++0x3 line.long 0x0 "PSR,Port status register" bitfld.long 0x0 1. "RX_BUSY,Receive busy" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" group.long 0x108++0xB line.long 0x0 "PRXSDUOR,Port receive SDU overhead register" hexmask.long.byte 0x0 8.--12. 1. "MACSEC_BCO,MACSec byte count overhead" hexmask.long.byte 0x0 0.--4. 1. "PPDU_BCO,PPDU Byte count overhead" line.long 0x4 "PTXSDUOR,Port transmit SDU overhead register" hexmask.long.byte 0x4 8.--12. 1. "MACSEC_BCO,MACSec byte count overhead" hexmask.long.byte 0x4 0.--4. 1. "PPDU_BCO,PPDU Byte count overhead" line.long 0x8 "PTGSCR,Port time gate scheduling control register" bitfld.long 0x8 31. "TGE,Time gating enable Port enable bit for time gate scheduling" "0,1" rgroup.long 0x114++0xB line.long 0x0 "PTGAGLSR,Port time gate scheduling admin gate list status register" bitfld.long 0x0 1. "CFG_PEND,Administrative gate control list pending 0 No administrative gate control list is configured 1 Administrative gate control list is pending (configured but not installed yet)" "0,1" bitfld.long 0x0 0. "TG,Time gated (state of the operational gate control list) 0 No operational gate control list is active 1 Operational gate control list is active" "0,1" line.long 0x4 "PTGAGLLR,Port time gate scheduling admin gate list length register" hexmask.long.word 0x4 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate control list length (number of entries)" line.long 0x8 "PTGOGLLR,Port time gating operational gate list length register" hexmask.long.word 0x8 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operational gate control list length (number of entries)" group.long 0x120++0x3 line.long 0x0 "PTGSATOR,Port time gate scheduling advance time offset register" hexmask.long.word 0x0 0.--15. 1. "ADV_TIME_OFFSET,Advance time offset This field specifies the amount of time to advance the IEEE 1588 time scale used by the time-based scheduler to adjust for the latency encountered across the MAC plus if needed delays outside of NETC (e" group.long 0x138++0x3 line.long 0x0 "PDGSR,Port default gate state register" bitfld.long 0x0 7. "DGS_TC7,Default gate state for traffic class 7 0 Closed 1 Open" "0,1" bitfld.long 0x0 6. "DGS_TC6,Default gate state for traffic class 6 0 Closed 1 Open" "0,1" bitfld.long 0x0 5. "DGS_TC5,Default gate state for traffic class 5 0 Closed 1 Open" "0,1" bitfld.long 0x0 4. "DGS_TC4,Default gate state for traffic class 4 0 Closed 1 Open" "0,1" newline bitfld.long 0x0 3. "DGS_TC3,Default gate state for traffic class 3 0 Closed 1 Open" "0,1" bitfld.long 0x0 2. "DGS_TC2,Default gate state for traffic class 2 0 Closed 1 Open" "0,1" bitfld.long 0x0 1. "DGS_TC1,Default gate state for traffic class 1 0 Closed 1 Open" "0,1" bitfld.long 0x0 0. "DGS_TC0,Default gate state for traffic class 0 0 Closed 1 Open" "0,1" rgroup.long 0x1C0++0x3 line.long 0x0 "PRXDCR,Port Rx discard count register" hexmask.long 0x0 0.--31. 1. "COUNT,Number of receive frames discarded" group.long 0x1C8++0x7 line.long 0x0 "PRXDCRR0,Port Rx discard count reason register 0" eventfld.long 0x0 17. "NODESTDR,No Destination Discard Reason" "0,1" eventfld.long 0x0 14. "L2DOSDR,Layer 2 Denial of Service Discard Reason Occurs if a packet is discarded due to L2DOS protection" "0,1" eventfld.long 0x0 13. "SIFDR,Station Interface Filter Discard Reason Occurs if packet is discarded by the L2 Filtering function" "0,1" eventfld.long 0x0 12. "ECCEDR,ECC Error Discard Reason" "0,1" newline eventfld.long 0x0 11. "ITEDR,Invalid Table Entry Discard Reason Table entry ID reference is not found in the table (entry has not been added to the table) Table entry ID is outside of its table allocation range Cleared when written to 1" "0,1" eventfld.long 0x0 8. "MSDUEDR,Ingress Stream Maximum Service Data Unit Exceeded Discard Reason Occurs if packet received is greater than the Maximum SDU size configured for the stream" "0,1" eventfld.long 0x0 7. "SGOEDR,Stream Gate Octet Exceeded Discard Reason Frame dropped due to octet count exceeded maximum specified for the open gate interval Cleared when written to 1" "0,1" eventfld.long 0x0 6. "SGCDR,Stream Gate Closed Discard Reason Frame received on this port that is dropped because it didn't pass the stream gate" "0,1" newline eventfld.long 0x0 5. "ISFDR,Ingress Stream Forwarding Discard Reason Occurs if frame is associated with an ingress stream whose Forwarding Action (FA) is equal to discard" "0,1" eventfld.long 0x0 4. "RPDR,Rate Policer Discard Reason" "0,1" eventfld.long 0x0 3. "IPFDR,Ingress Port Filter Discard Reason. Cleared when written to 1." "0,1" eventfld.long 0x0 2. "RXDISDR,Receive disable discard reason due to port being in receive disabled state (POR[RXDIS]=1)" "0,1" newline eventfld.long 0x0 1. "SMREDR,Shared Memory Resource Exhaustion Discard Reason Occurs if Ethernet Rx I/F cannot allocate shared internal buffer memory to store the entire received frame" "0,1" eventfld.long 0x0 0. "PCDR,Pre-Classification Discard Reason Occurs if Parse Classifier Engine (PCE) block does not have any free processing thread to process the received frame" "0,1" line.long 0x4 "PRXDCRR1,Port Rx discard count reason register 1" hexmask.long.byte 0x4 28.--31. 1. "TT,Table type which caused the discard" hexmask.long.word 0x4 0.--15. 1. "ENTRYID,Entry Id who last incremented discard count" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CC94200 ad:0x4CC94220 ad:0x4CC94240 ad:0x4CC94260 ad:0x4CC94280 ad:0x4CC942A0 ad:0x4CC942C0 ad:0x4CC942E0) tree "tct_num[$1]" base $2 group.long ($2+0x8)++0x3 line.long 0x0 "PTCTMSDUR,Port traffic class a transmit maximum SDU register" bitfld.long 0x0 24. "SF_MAXSDU_DIS,When cleared the Tx Max SDU check is performed for Store and Forward frames" "0,1" bitfld.long 0x0 16.--17. "SDU_TYPE,Specifies the type of PDU/SDU (Protocol/Service Data Unit) whose length is being validated as seen on the link" "0,1,2,3" hexmask.long.word 0x0 0.--15. 1. "MAXSDU,Transmit Maximum SDU size in bytes (i" group.long ($2+0x10)++0x7 line.long 0x0 "PTCCBSR0,Port transmit traffic class a credit based shaper register 0" bitfld.long 0x0 31. "CBSE,Credit based shaper enable 0 Disabled 1 Enabled" "0,1" hexmask.long.byte 0x0 0.--6. 1. "BW,Bandwidth Bandwidth allocation is described in percentage units of the port transmit rate and ranging from 0-100 for the credit-based shaper" line.long 0x4 "PTCCBSR1,Port traffic class a credit based shaper register 1" hexmask.long 0x4 0.--31. 1. "HI_CREDIT,hicredit (in credit units) The maximum allowed accumulation of credits when conflicting transfers occur" tree.end repeat.end base ad:0x4CC94000 group.long 0x460++0x3 line.long 0x0 "PISIDCR,Port ingress stream identification configuration register" hexmask.long.word 0x0 16.--31. 1. "ISEID,Default Ingress Stream Entry ID" bitfld.long 0x0 2. "KC1EN,Key Construction 1 Enable" "0,1" bitfld.long 0x0 1. "KC0EN,Key Construction 0 Enable" "0,1" bitfld.long 0x0 0. "KCPAIR,Indicates which Ingress Stream Identification Key Construction pair to use for this port" "0,1" tree.end tree "ENETC2_PORT" base ad:0x4CD14000 rgroup.long 0x0++0xB line.long 0x0 "PCAPR,Port capability register" bitfld.long 0x0 29. "CBS,Credit Based Shaping" "0,1" bitfld.long 0x0 28. "TGS,Time Gate Scheduling" "0,1" hexmask.long.byte 0x0 12.--15. 1. "NUM_TC,Number of Traffic Classes (TCs) supported Formula: NUM_TC+1" bitfld.long 0x0 4. "LINK_TYPE,Indicates the link type 0 External Link 1 Pseudo Link" "0,1" line.long 0x4 "PMCAPR,Port MAC capability register" hexmask.long.byte 0x4 24.--27. 1. "MII_PROT,Indicates the MII protocol supported" bitfld.long 0x4 9.--10. "FP,Indicates if frame preemption is supported" "0,1,2,3" bitfld.long 0x4 8. "HD,Indicates if Half Duplex Mode is supported on this link" "0,1" bitfld.long 0x4 4.--5. "EFPAD,Egress frame padding capability indicates if egress frames smaller than 64B are padded with zeroes" "0,1,2,3" newline bitfld.long 0x4 0.--2. "MAC_VAR,MAC Variant" "0,1,2,3,4,5,6,7" line.long 0x8 "PIOCAPR,Port I/O capability register" bitfld.long 0x8 31. "REVMII,Reverse Mode Device Configuration" "0,1" bitfld.long 0x8 30. "REVMII_RATE,RevMII MII rate" "0,1" bitfld.long 0x8 28. "EMDIO,External MDIO supported." "0,1" hexmask.long.byte 0x8 24.--27. 1. "IO_VAR,IO Variants supported" newline hexmask.long.word 0x8 0.--15. 1. "PCS_PROT,PCS protocols supported" group.long 0x10++0x3 line.long 0x0 "PCR,Port configuration register" hexmask.long.word 0x0 16.--29. 1. "PSPEED,Transmit Port Speed The speed in 10Mbps increments at which the port is assumed to be running for scheduling purposes" bitfld.long 0x0 8. "TIMER_CS,Timer Clock Selection: On receive this field determines which of the two Rx timestamps (synchronized or free running) is reported to the host" "0,1" bitfld.long 0x0 4. "L2DOSE,L2 Ethernet DoS Protection Enable 0 L2 IP DoS protection is disabled" "0,1" bitfld.long 0x0 0. "HDR_FMT,Indicates the frame format received/transmitted on the port 0 Ethernet frame format 1 Reserved" "0,1" group.long 0x20++0x7 line.long 0x0 "PMAR0,Port MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "PMAR1,Port MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" group.long 0x50++0x7 line.long 0x0 "PTAR,Port TPID acceptance register" hexmask.long.byte 0x0 4.--7. 1. "IVTPIDL,Outer VLAN TPID List : bitmap identifying which TPIDs are acceptable as Inner VLAN tag xxx1 Standard C-VLAN 0x8100 xx1x Standard S-VLAN 0x88A8 x1xx Custom VLAN as defined by CVLANR1[ETYPE] 1xxx Custom VLAN as defined by CVLANR2[ETYPE]" hexmask.long.byte 0x0 0.--3. 1. "OVTPIDL,Outer VLAN TPID List : bitmap identifying which TPIDs are acceptable as Outer VLAN tag xxx1 Standard C-VLAN 0x8100 xx1x Standard S-VLAN 0x88A8 x1xx Custom VLAN as defined by CVLANR1[ETYPE] 1xxx Custom VLAN as defined by CVLANR2[ETYPE]" line.long 0x4 "PQOSMR,Port QoS mode register" hexmask.long.byte 0x4 16.--19. 1. "VQMP,Mapping profile index" bitfld.long 0x4 4.--6. "DIPV,Default IPV Sets the default IPV for the port." "0,1,2,3,4,5,6,7" bitfld.long 0x4 2.--3. "DDR,Default DR Sets the default DR for the port." "0,1,2,3" bitfld.long 0x4 1. "VE,VLAN enable 0 Defaults are used 1 Enables use of VLAN info to determine IPV and DR (based on VLANIPVMPaR0/1 and VLANDRMPaR)" "0,1" newline bitfld.long 0x4 0. "VS,VLAN tag select: 0 Inner VLAN tag will be used if VE is set 1 Outer VLAN tag will be used if VE is set" "0,1" group.long 0x80++0x7 line.long 0x0 "PPCR,Port parser configuration register" hexmask.long.byte 0x0 25.--29. 1. "L4PFS,L4 payload fields size in bytes This is the largest L4 Payload size used by any table lookup key by this port" bitfld.long 0x0 24. "L4HFP,L4 Header fields present 0 No L4 header present" "0,1" hexmask.long.byte 0x0 17.--21. 1. "L3PFS,L3 payload fields size in bytes This is the largest L3 Payload size used by any table lookup key by this port" bitfld.long 0x0 16. "L3HFP,L3 header fields present 0 No L3 header present" "0,1" newline hexmask.long.byte 0x0 9.--13. 1. "L2PFS,L2 payload fields size in bytes This is the largest L2 payload size used by any table lookup key by this port" hexmask.long.byte 0x0 1.--5. 1. "L1PFS,Unused" line.long 0x4 "PIPFCR,Port ingress port filter configuration register" bitfld.long 0x4 0. "EN,0 Ingress Port Filter table lookup is disabled for this port 1 Ingress Port Filter table lookup is enabled for this port" "0,1" group.long 0xA0++0x3 line.long 0x0 "PSGCR,Port stream gate configuration register" bitfld.long 0x0 31. "OGC,Stream Gate Open Gate Check mode: 0 Gate open check passes if the Start of Frame (SFD) is within the open gate interval 1 Gate open check passes if the entire frame is within the open gate interval" "0,1" hexmask.long.tbyte 0x0 0.--23. 1. "PDELAY,Link propagation delay in nanoseconds" group.long 0x100++0x3 line.long 0x0 "POR,Port operational register" bitfld.long 0x0 1. "RXDIS,Rx Disable" "0,1" bitfld.long 0x0 0. "TXDIS,Tx Disable" "0,1" rgroup.long 0x104++0x3 line.long 0x0 "PSR,Port status register" bitfld.long 0x0 1. "RX_BUSY,Receive busy" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" group.long 0x108++0xB line.long 0x0 "PRXSDUOR,Port receive SDU overhead register" hexmask.long.byte 0x0 8.--12. 1. "MACSEC_BCO,MACSec byte count overhead" hexmask.long.byte 0x0 0.--4. 1. "PPDU_BCO,PPDU Byte count overhead" line.long 0x4 "PTXSDUOR,Port transmit SDU overhead register" hexmask.long.byte 0x4 8.--12. 1. "MACSEC_BCO,MACSec byte count overhead" hexmask.long.byte 0x4 0.--4. 1. "PPDU_BCO,PPDU Byte count overhead" line.long 0x8 "PTGSCR,Port time gate scheduling control register" bitfld.long 0x8 31. "TGE,Time gating enable Port enable bit for time gate scheduling" "0,1" rgroup.long 0x114++0xB line.long 0x0 "PTGAGLSR,Port time gate scheduling admin gate list status register" bitfld.long 0x0 1. "CFG_PEND,Administrative gate control list pending 0 No administrative gate control list is configured 1 Administrative gate control list is pending (configured but not installed yet)" "0,1" bitfld.long 0x0 0. "TG,Time gated (state of the operational gate control list) 0 No operational gate control list is active 1 Operational gate control list is active" "0,1" line.long 0x4 "PTGAGLLR,Port time gate scheduling admin gate list length register" hexmask.long.word 0x4 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate control list length (number of entries)" line.long 0x8 "PTGOGLLR,Port time gating operational gate list length register" hexmask.long.word 0x8 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operational gate control list length (number of entries)" group.long 0x120++0x3 line.long 0x0 "PTGSATOR,Port time gate scheduling advance time offset register" hexmask.long.word 0x0 0.--15. 1. "ADV_TIME_OFFSET,Advance time offset This field specifies the amount of time to advance the IEEE 1588 time scale used by the time-based scheduler to adjust for the latency encountered across the MAC plus if needed delays outside of NETC (e" group.long 0x138++0x3 line.long 0x0 "PDGSR,Port default gate state register" bitfld.long 0x0 7. "DGS_TC7,Default gate state for traffic class 7 0 Closed 1 Open" "0,1" bitfld.long 0x0 6. "DGS_TC6,Default gate state for traffic class 6 0 Closed 1 Open" "0,1" bitfld.long 0x0 5. "DGS_TC5,Default gate state for traffic class 5 0 Closed 1 Open" "0,1" bitfld.long 0x0 4. "DGS_TC4,Default gate state for traffic class 4 0 Closed 1 Open" "0,1" newline bitfld.long 0x0 3. "DGS_TC3,Default gate state for traffic class 3 0 Closed 1 Open" "0,1" bitfld.long 0x0 2. "DGS_TC2,Default gate state for traffic class 2 0 Closed 1 Open" "0,1" bitfld.long 0x0 1. "DGS_TC1,Default gate state for traffic class 1 0 Closed 1 Open" "0,1" bitfld.long 0x0 0. "DGS_TC0,Default gate state for traffic class 0 0 Closed 1 Open" "0,1" rgroup.long 0x1C0++0x3 line.long 0x0 "PRXDCR,Port Rx discard count register" hexmask.long 0x0 0.--31. 1. "COUNT,Number of receive frames discarded" group.long 0x1C8++0x7 line.long 0x0 "PRXDCRR0,Port Rx discard count reason register 0" eventfld.long 0x0 17. "NODESTDR,No Destination Discard Reason" "0,1" eventfld.long 0x0 14. "L2DOSDR,Layer 2 Denial of Service Discard Reason Occurs if a packet is discarded due to L2DOS protection" "0,1" eventfld.long 0x0 13. "SIFDR,Station Interface Filter Discard Reason Occurs if packet is discarded by the L2 Filtering function" "0,1" eventfld.long 0x0 12. "ECCEDR,ECC Error Discard Reason" "0,1" newline eventfld.long 0x0 11. "ITEDR,Invalid Table Entry Discard Reason Table entry ID reference is not found in the table (entry has not been added to the table) Table entry ID is outside of its table allocation range Cleared when written to 1" "0,1" eventfld.long 0x0 8. "MSDUEDR,Ingress Stream Maximum Service Data Unit Exceeded Discard Reason Occurs if packet received is greater than the Maximum SDU size configured for the stream" "0,1" eventfld.long 0x0 7. "SGOEDR,Stream Gate Octet Exceeded Discard Reason Frame dropped due to octet count exceeded maximum specified for the open gate interval Cleared when written to 1" "0,1" eventfld.long 0x0 6. "SGCDR,Stream Gate Closed Discard Reason Frame received on this port that is dropped because it didn't pass the stream gate" "0,1" newline eventfld.long 0x0 5. "ISFDR,Ingress Stream Forwarding Discard Reason Occurs if frame is associated with an ingress stream whose Forwarding Action (FA) is equal to discard" "0,1" eventfld.long 0x0 4. "RPDR,Rate Policer Discard Reason" "0,1" eventfld.long 0x0 3. "IPFDR,Ingress Port Filter Discard Reason. Cleared when written to 1." "0,1" eventfld.long 0x0 2. "RXDISDR,Receive disable discard reason due to port being in receive disabled state (POR[RXDIS]=1)" "0,1" newline eventfld.long 0x0 1. "SMREDR,Shared Memory Resource Exhaustion Discard Reason Occurs if Ethernet Rx I/F cannot allocate shared internal buffer memory to store the entire received frame" "0,1" eventfld.long 0x0 0. "PCDR,Pre-Classification Discard Reason Occurs if Parse Classifier Engine (PCE) block does not have any free processing thread to process the received frame" "0,1" line.long 0x4 "PRXDCRR1,Port Rx discard count reason register 1" hexmask.long.byte 0x4 28.--31. 1. "TT,Table type which caused the discard" hexmask.long.word 0x4 0.--15. 1. "ENTRYID,Entry Id who last incremented discard count" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CD14200 ad:0x4CD14220 ad:0x4CD14240 ad:0x4CD14260 ad:0x4CD14280 ad:0x4CD142A0 ad:0x4CD142C0 ad:0x4CD142E0) tree "tct_num[$1]" base $2 group.long ($2+0x8)++0x3 line.long 0x0 "PTCTMSDUR,Port traffic class a transmit maximum SDU register" bitfld.long 0x0 24. "SF_MAXSDU_DIS,When cleared the Tx Max SDU check is performed for Store and Forward frames" "0,1" bitfld.long 0x0 16.--17. "SDU_TYPE,Specifies the type of PDU/SDU (Protocol/Service Data Unit) whose length is being validated as seen on the link" "0,1,2,3" hexmask.long.word 0x0 0.--15. 1. "MAXSDU,Transmit Maximum SDU size in bytes (i" group.long ($2+0x10)++0x7 line.long 0x0 "PTCCBSR0,Port transmit traffic class a credit based shaper register 0" bitfld.long 0x0 31. "CBSE,Credit based shaper enable 0 Disabled 1 Enabled" "0,1" hexmask.long.byte 0x0 0.--6. 1. "BW,Bandwidth Bandwidth allocation is described in percentage units of the port transmit rate and ranging from 0-100 for the credit-based shaper" line.long 0x4 "PTCCBSR1,Port traffic class a credit based shaper register 1" hexmask.long 0x4 0.--31. 1. "HI_CREDIT,hicredit (in credit units) The maximum allowed accumulation of credits when conflicting transfers occur" tree.end repeat.end base ad:0x4CD14000 group.long 0x460++0x3 line.long 0x0 "PISIDCR,Port ingress stream identification configuration register" hexmask.long.word 0x0 16.--31. 1. "ISEID,Default Ingress Stream Entry ID" bitfld.long 0x0 2. "KC1EN,Key Construction 1 Enable" "0,1" bitfld.long 0x0 1. "KC0EN,Key Construction 0 Enable" "0,1" bitfld.long 0x0 0. "KCPAIR,Indicates which Ingress Stream Identification Key Construction pair to use for this port" "0,1" tree.end tree.end tree "NETC_PRIV" base ad:0x4CFE0000 group.long 0x100++0x3 line.long 0x0 "NETCRR,NETC reset register" bitfld.long 0x0 1. "LOCK,Lock" "0,1" bitfld.long 0x0 0. "SR,Soft reset" "0,1" rgroup.long 0x104++0x3 line.long 0x0 "NETCSR,NETC status register" bitfld.long 0x0 1. "STATE,Indicates NETC's operational state" "0,1" bitfld.long 0x0 0. "ERROR,Error" "0,1" group.long 0x208++0x7 line.long 0x0 "MEICR,Memory Error Injection Config Register" bitfld.long 0x0 30.--31. "ARM,Armed" "0,1,2,3" hexmask.long.byte 0x0 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x0 0.--4. 1. "LINK_ID,Link ID" line.long 0x4 "EICR,Error Injection Code Register" hexmask.long.byte 0x4 0.--7. 1. "EN,Enable" group.long 0xE00++0x7 line.long 0x0 "CMECR,Correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "CMESR,Correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" rbitfld.long 0x4 29. "LE,Locality Elevated" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "CMECTR,Correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "UNMECR,Uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "UNMESR0,Uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 29. "LE,Locality Elevated" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE38++0x7 line.long 0x0 "UNMESR1,Uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "UNMECTR,Uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE40++0x7 line.long 0x0 "UFMECR,Uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "UFMESR0,Uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 29. "LE,Locality Elevated" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE48++0x3 line.long 0x0 "UFMESR1,Uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" tree.end tree "NETC_SAI" base ad:0x4C880000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--19. 1. "FRAME,Frame Size" hexmask.long.byte 0x4 8.--11. 1. "FIFO,FIFO Size" newline hexmask.long.byte 0x4 0.--3. 1. "DATALINE,Number of Datalinks" group.long 0x8++0x17 line.long 0x0 "TCSR,Transmit Control" bitfld.long 0x0 31. "TE,Transmitter Enable" "0: Transmitter is disabled.,1: Transmitter is enabled or transmitter has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode.,1: Transmitter enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled.,1: Transmit bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected.,1: Transmit underrun detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty.,1: Enabled transmit FIFO is empty." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached.,1: Transmit FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA warning.,1: Enables the DMA warning." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "TCR1,Transmit Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "TFW,Transmit FIFO Watermark" line.long 0x8 "TCR2,Transmit Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "TCR3,Transmit Configuration 3" hexmask.long.byte 0xC 24.--31. 1. "CFR,Channel FIFO Reset" hexmask.long.byte 0xC 16.--23. 1. "TCE,Transmit Channel Enable" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "TCR4,Transmit Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO reads (from..,2: FIFO Combine mode enabled on FIFO writes (by..,3: FIFO Combine mode enabled on FIFO reads (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled.,?,2: 8-bit FIFO packing is enabled.,3: 16-bit FIFO packing is enabled." hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are 3-stated when..,1: Output mode transmit data pins are never.." newline bitfld.long 0x10 4. "MF,MSB First" "0: LSB is transmitted first.,1: MSB is transmitted first." bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." newline bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." newline bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave mode.,1: Frame sync is generated internally in Master mode." line.long 0x14 "TCR5,Transmit Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x20)++0x3 line.long 0x0 "TDR[$1],Transmit Data" hexmask.long 0x0 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x40)++0x3 line.long 0x0 "TFR[$1],Transmit FIFO" bitfld.long 0x0 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO Combine mode is enabled for FIFO writes and.." hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" newline hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0x60++0x3 line.long 0x0 "TMR,Transmit Mask" hexmask.long 0x0 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x3 line.long 0x0 "TTCR,Transmit Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the receive..,2: Timestamp counter increments when the transmit..,3: Timestamp counter increments when the receive.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0x74++0xB line.long 0x0 "TTSR,Transmit Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "TBCR,Transmit Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x17 line.long 0x0 "RCSR,Receive Control" bitfld.long 0x0 31. "RE,Receiver Enable" "0: Receiver is disabled.,1: Receiver is enabled or receiver has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode.,1: Receiver enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled.,1: Receive bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect.,1: Software reset." newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected.,1: Receive overflow detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full.,1: Enabled receive FIFO is full." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached.,1: Receive FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables DMA warnings.,1: Enables DMA warnings." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "RCR1,Receive Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "RFW,Receive FIFO Watermark" line.long 0x8 "RCR2,Receive Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "RCR3,Receive Configuration 3" hexmask.long.byte 0xC 24.--31. 1. "CFR,Channel FIFO Reset" hexmask.long.byte 0xC 16.--23. 1. "RCE,Receive Channel Enable" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "RCR4,Receive Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO writes (from..,2: FIFO Combine mode enabled on FIFO reads (by..,3: FIFO Combine mode enabled on FIFO writes (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame Size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 4. "MF,MSB First" "0: LSB is received first.,1: MSB is received first." newline bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." newline bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave mode.,1: Frame Sync is generated internally in Master mode." line.long 0x14 "RCR5,Receive Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xA0)++0x3 line.long 0x0 "RDR[$1],Receive Data" hexmask.long 0x0 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xC0)++0x3 line.long 0x0 "RFR[$1],Receive FIFO" hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" bitfld.long 0x0 15. "RCP,Receive Channel Pointer" "0: No effect.,1: FIFO Combine mode is enabled for FIFO reads and.." newline hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0xE0++0x3 line.long 0x0 "RMR,Receive Mask" hexmask.long 0x0 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x3 line.long 0x0 "RTCR,Receive Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the transmit..,2: Timestamp counter increments when the receive..,3: Timestamp counter increments when the transmit.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0xF4++0xB line.long 0x0 "RTSR,Receive Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "RBCR,Receive Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x100++0x3 line.long 0x0 "MCR,MCLK Control" bitfld.long 0x0 30. "MOE,MCLK Output Enable" "0: MCLK signal pin is an input.,1: MCLK signal pin is an output." bitfld.long 0x0 24.--25. "MSEL,MCLK Select" "0: Master Clock (MCLK) 1 option selected.,?,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x0 23. "DIVEN,MCLK Post Divide Enable" "0: Output on MCLK signal pin is the audio master..,1: Output on MCLK signal pin is a post-divided.." hexmask.long.byte 0x0 0.--7. 1. "DIV,MCLK Post Divide" tree.end tree "NETC_SI" tree "ENETC0_PSI" base ad:0x4CC00000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0xB line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" line.long 0x4 "SIMCAR,Station interface message cache attribute register" bitfld.long 0x4 22.--23. "MSG_RDSNP,SI messaging read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x4 20.--21. "MSG_RDDOMAIN,SI messaging read data domain This is the domain attribute setting used when NETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" hexmask.long.byte 0x4 16.--19. 1. "MSG_RDCACHE,SI messaging read data cache type This is the cache attribute setting used when NETC reads PSI-VSI message from memory during partition copy" newline bitfld.long 0x4 6.--7. "MSG_WRSNP,SI messaging write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x4 4.--5. "MSG_WRDOMAIN,SI messaging write domain This is the domain attribute setting used when NETC writes PSI-VSI message during partition copy" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "MSG_WRCACHE,SI messaging write cache type This is the cache attribute setting used when NETC writes PSI-VSI message during partition copy" line.long 0x8 "SICCAR,Station interface command cache attribute register" bitfld.long 0x8 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x8 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x8 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x8 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x8 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x8 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" group.long 0x204++0x7 line.long 0x0 "PSIMSGRR,Physical station interface message receive register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field provides the result of the message back from the VSI from which it originated" eventfld.long 0x0 2. "MR2,Message received from VSI a When this bit is set a message is available at address PSIVaMSGRCVAR0/1 from VSI a" "0,1" eventfld.long 0x0 1. "MR1,Message received from VSI a When this bit is set a message is available at address PSIVaMSGRCVAR0/1 from VSI a" "0,1" line.long 0x4 "PSIMSGSR,Physical station interface message send register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value" bitfld.long 0x4 2. "MS2,Message sent to VSI a When this bit is set (b1) from a clear state (b0) the message code provided in the MC field will be sent to the VSI" "0,1" bitfld.long 0x4 1. "MS1,Message sent to VSI a When this bit is set (b1) from a clear state (b0) the message code provided in the MC field will be sent to the VSI" "0,1" group.long 0x210++0xF line.long 0x0 "PSIV1MSGRCVAR0,PSI VSI 1 message receive address register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message received." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes copied from VSIMSGSNDAR0[MSIZE]" line.long 0x4 "PSIV1MSGRCVAR1,PSI VSI 1 message receive address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." line.long 0x8 "PSIV2MSGRCVAR0,PSI VSI 2 message receive address register 0" hexmask.long 0x8 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message received." hexmask.long.byte 0x8 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes copied from VSIMSGSNDAR0[MSIZE]" line.long 0xC "PSIV2MSGRCVAR1,PSI VSI 2 message receive address register 1" hexmask.long 0xC 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "PSIIER,Physical station interface interrupt enable register" bitfld.long 0x0 18. "FLR2IE,Function level reset interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 17. "FLR1IE,Function level reset interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 2. "MR2IE,Message receive interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" newline bitfld.long 0x0 1. "MR1IE,Message receive interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "PSIIDR,Physical station interface interrupt detect register" eventfld.long 0x0 18. "FLR2,Function level reset of VF initiated by VSI n 0 No reset 1 Reset" "0,1" eventfld.long 0x0 17. "FLR1,Function level reset of VF initiated by VSI n 0 No reset 1 Reset" "0,1" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" newline eventfld.long 0x0 2. "MR2,Message received from VSI n 0 No message received 1 Message received" "0,1" eventfld.long 0x0 1. "MR1,Message received from VSI n 0 No message received 1 Message received" "0,1" rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CC08000 ad:0x4CC08200 ad:0x4CC08400 ad:0x4CC08600 ad:0x4CC08800 ad:0x4CC08A00 ad:0x4CC08C00 ad:0x4CC08E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC1_PSI" base ad:0x4CC80000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0xB line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" line.long 0x4 "SIMCAR,Station interface message cache attribute register" bitfld.long 0x4 22.--23. "MSG_RDSNP,SI messaging read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x4 20.--21. "MSG_RDDOMAIN,SI messaging read data domain This is the domain attribute setting used when NETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" hexmask.long.byte 0x4 16.--19. 1. "MSG_RDCACHE,SI messaging read data cache type This is the cache attribute setting used when NETC reads PSI-VSI message from memory during partition copy" newline bitfld.long 0x4 6.--7. "MSG_WRSNP,SI messaging write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x4 4.--5. "MSG_WRDOMAIN,SI messaging write domain This is the domain attribute setting used when NETC writes PSI-VSI message during partition copy" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "MSG_WRCACHE,SI messaging write cache type This is the cache attribute setting used when NETC writes PSI-VSI message during partition copy" line.long 0x8 "SICCAR,Station interface command cache attribute register" bitfld.long 0x8 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x8 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x8 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x8 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x8 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x8 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" group.long 0x204++0x7 line.long 0x0 "PSIMSGRR,Physical station interface message receive register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field provides the result of the message back from the VSI from which it originated" eventfld.long 0x0 2. "MR2,Message received from VSI a When this bit is set a message is available at address PSIVaMSGRCVAR0/1 from VSI a" "0,1" eventfld.long 0x0 1. "MR1,Message received from VSI a When this bit is set a message is available at address PSIVaMSGRCVAR0/1 from VSI a" "0,1" line.long 0x4 "PSIMSGSR,Physical station interface message send register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value" bitfld.long 0x4 2. "MS2,Message sent to VSI a When this bit is set (b1) from a clear state (b0) the message code provided in the MC field will be sent to the VSI" "0,1" bitfld.long 0x4 1. "MS1,Message sent to VSI a When this bit is set (b1) from a clear state (b0) the message code provided in the MC field will be sent to the VSI" "0,1" group.long 0x210++0xF line.long 0x0 "PSIV1MSGRCVAR0,PSI VSI 1 message receive address register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message received." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes copied from VSIMSGSNDAR0[MSIZE]" line.long 0x4 "PSIV1MSGRCVAR1,PSI VSI 1 message receive address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." line.long 0x8 "PSIV2MSGRCVAR0,PSI VSI 2 message receive address register 0" hexmask.long 0x8 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message received." hexmask.long.byte 0x8 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes copied from VSIMSGSNDAR0[MSIZE]" line.long 0xC "PSIV2MSGRCVAR1,PSI VSI 2 message receive address register 1" hexmask.long 0xC 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "PSIIER,Physical station interface interrupt enable register" bitfld.long 0x0 18. "FLR2IE,Function level reset interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 17. "FLR1IE,Function level reset interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 2. "MR2IE,Message receive interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" newline bitfld.long 0x0 1. "MR1IE,Message receive interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "PSIIDR,Physical station interface interrupt detect register" eventfld.long 0x0 18. "FLR2,Function level reset of VF initiated by VSI n 0 No reset 1 Reset" "0,1" eventfld.long 0x0 17. "FLR1,Function level reset of VF initiated by VSI n 0 No reset 1 Reset" "0,1" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" newline eventfld.long 0x0 2. "MR2,Message received from VSI n 0 No message received 1 Message received" "0,1" eventfld.long 0x0 1. "MR1,Message received from VSI n 0 No message received 1 Message received" "0,1" rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CC88000 ad:0x4CC88200 ad:0x4CC88400 ad:0x4CC88600 ad:0x4CC88800 ad:0x4CC88A00 ad:0x4CC88C00 ad:0x4CC88E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC2_PSI" base ad:0x4CD00000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0xB line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" line.long 0x4 "SIMCAR,Station interface message cache attribute register" bitfld.long 0x4 22.--23. "MSG_RDSNP,SI messaging read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x4 20.--21. "MSG_RDDOMAIN,SI messaging read data domain This is the domain attribute setting used when NETC reads PSI-VSI message from memory during partition copy" "0,1,2,3" hexmask.long.byte 0x4 16.--19. 1. "MSG_RDCACHE,SI messaging read data cache type This is the cache attribute setting used when NETC reads PSI-VSI message from memory during partition copy" newline bitfld.long 0x4 6.--7. "MSG_WRSNP,SI messaging write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x4 4.--5. "MSG_WRDOMAIN,SI messaging write domain This is the domain attribute setting used when NETC writes PSI-VSI message during partition copy" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "MSG_WRCACHE,SI messaging write cache type This is the cache attribute setting used when NETC writes PSI-VSI message during partition copy" line.long 0x8 "SICCAR,Station interface command cache attribute register" bitfld.long 0x8 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x8 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x8 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x8 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x8 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x8 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x8 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" group.long 0x204++0x7 line.long 0x0 "PSIMSGRR,Physical station interface message receive register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field provides the result of the message back from the VSI from which it originated" eventfld.long 0x0 2. "MR2,Message received from VSI a When this bit is set a message is available at address PSIVaMSGRCVAR0/1 from VSI a" "0,1" eventfld.long 0x0 1. "MR1,Message received from VSI a When this bit is set a message is available at address PSIVaMSGRCVAR0/1 from VSI a" "0,1" line.long 0x4 "PSIMSGSR,Physical station interface message send register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value" bitfld.long 0x4 2. "MS2,Message sent to VSI a When this bit is set (b1) from a clear state (b0) the message code provided in the MC field will be sent to the VSI" "0,1" bitfld.long 0x4 1. "MS1,Message sent to VSI a When this bit is set (b1) from a clear state (b0) the message code provided in the MC field will be sent to the VSI" "0,1" group.long 0x210++0xF line.long 0x0 "PSIV1MSGRCVAR0,PSI VSI 1 message receive address register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message received." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes copied from VSIMSGSNDAR0[MSIZE]" line.long 0x4 "PSIV1MSGRCVAR1,PSI VSI 1 message receive address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." line.long 0x8 "PSIV2MSGRCVAR0,PSI VSI 2 message receive address register 0" hexmask.long 0x8 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message received." hexmask.long.byte 0x8 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes copied from VSIMSGSNDAR0[MSIZE]" line.long 0xC "PSIV2MSGRCVAR1,PSI VSI 2 message receive address register 1" hexmask.long 0xC 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "PSIIER,Physical station interface interrupt enable register" bitfld.long 0x0 18. "FLR2IE,Function level reset interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 17. "FLR1IE,Function level reset interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 2. "MR2IE,Message receive interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" newline bitfld.long 0x0 1. "MR1IE,Message receive interrupt enable initiated by VSI n 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "PSIIDR,Physical station interface interrupt detect register" eventfld.long 0x0 18. "FLR2,Function level reset of VF initiated by VSI n 0 No reset 1 Reset" "0,1" eventfld.long 0x0 17. "FLR1,Function level reset of VF initiated by VSI n 0 No reset 1 Reset" "0,1" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" newline eventfld.long 0x0 2. "MR2,Message received from VSI n 0 No message received 1 Message received" "0,1" eventfld.long 0x0 1. "MR1,Message received from VSI n 0 No message received 1 Message received" "0,1" rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CD08000 ad:0x4CD08200 ad:0x4CD08400 ad:0x4CD08600 ad:0x4CD08800 ad:0x4CD08A00 ad:0x4CD08C00 ad:0x4CD08E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC_VSI0" base ad:0x4CE40000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" group.long 0x48++0x3 line.long 0x0 "SICCAR,Station interface command cache attribute register" bitfld.long 0x0 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" rgroup.long 0x204++0x7 line.long 0x0 "VSIMSGSR,Virtual station interface message send register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field may provide additional information about the completion status of the command" bitfld.long 0x0 1. "MS,Message status The status bit indicates if the command was executed successfully" "0,1" bitfld.long 0x0 0. "MB,Message busy This bit will clear automatically and status field MS set accordingly" "0,1" line.long 0x4 "VSIMSGRR,Virtual station interface message receive register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value from the PSI." bitfld.long 0x4 0. "MR,Message Received When set indicates that a message provided by field MC has been received from the PSI" "0,1" group.long 0x210++0x7 line.long 0x0 "VSIMSGSNDAR0,Virtual station interface message send register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message to be sent. Message is 32B address aligned." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes" line.long 0x4 "VSIMSGSNDAR1,Virtual station interface message send address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x3F0)++0x3 line.long 0x0 "SIBLPR[$1],Station interface boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "VSIIER,Virtual station interface interrupt enable register" bitfld.long 0x0 9. "MRIE,Message received interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 8. "MSIE,Message sent interrupt enable 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "VSIIDR,Virtual station interface interrupt detect register" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" eventfld.long 0x0 9. "MR,Message received 0 No message 1 Message received from PSI see VSIMSGRR" "0,1" eventfld.long 0x0 8. "MS,Message sent 0 Message sent to PSI has not completed 1 Message sent to PSI has completed and response received" "0,1" newline rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CE48000 ad:0x4CE48200 ad:0x4CE48400 ad:0x4CE48600 ad:0x4CE48800 ad:0x4CE48A00 ad:0x4CE48C00 ad:0x4CE48E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC_VSI1" base ad:0x4CE60000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" group.long 0x48++0x3 line.long 0x0 "SICCAR,Station interface command cache attribute register" bitfld.long 0x0 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" rgroup.long 0x204++0x7 line.long 0x0 "VSIMSGSR,Virtual station interface message send register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field may provide additional information about the completion status of the command" bitfld.long 0x0 1. "MS,Message status The status bit indicates if the command was executed successfully" "0,1" bitfld.long 0x0 0. "MB,Message busy This bit will clear automatically and status field MS set accordingly" "0,1" line.long 0x4 "VSIMSGRR,Virtual station interface message receive register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value from the PSI." bitfld.long 0x4 0. "MR,Message Received When set indicates that a message provided by field MC has been received from the PSI" "0,1" group.long 0x210++0x7 line.long 0x0 "VSIMSGSNDAR0,Virtual station interface message send register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message to be sent. Message is 32B address aligned." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes" line.long 0x4 "VSIMSGSNDAR1,Virtual station interface message send address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x3F0)++0x3 line.long 0x0 "SIBLPR[$1],Station interface boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "VSIIER,Virtual station interface interrupt enable register" bitfld.long 0x0 9. "MRIE,Message received interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 8. "MSIE,Message sent interrupt enable 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "VSIIDR,Virtual station interface interrupt detect register" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" eventfld.long 0x0 9. "MR,Message received 0 No message 1 Message received from PSI see VSIMSGRR" "0,1" eventfld.long 0x0 8. "MS,Message sent 0 Message sent to PSI has not completed 1 Message sent to PSI has completed and response received" "0,1" newline rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CE68000 ad:0x4CE68200 ad:0x4CE68400 ad:0x4CE68600 ad:0x4CE68800 ad:0x4CE68A00 ad:0x4CE68C00 ad:0x4CE68E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC_VSI2" base ad:0x4CE80000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" group.long 0x48++0x3 line.long 0x0 "SICCAR,Station interface command cache attribute register" bitfld.long 0x0 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" rgroup.long 0x204++0x7 line.long 0x0 "VSIMSGSR,Virtual station interface message send register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field may provide additional information about the completion status of the command" bitfld.long 0x0 1. "MS,Message status The status bit indicates if the command was executed successfully" "0,1" bitfld.long 0x0 0. "MB,Message busy This bit will clear automatically and status field MS set accordingly" "0,1" line.long 0x4 "VSIMSGRR,Virtual station interface message receive register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value from the PSI." bitfld.long 0x4 0. "MR,Message Received When set indicates that a message provided by field MC has been received from the PSI" "0,1" group.long 0x210++0x7 line.long 0x0 "VSIMSGSNDAR0,Virtual station interface message send register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message to be sent. Message is 32B address aligned." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes" line.long 0x4 "VSIMSGSNDAR1,Virtual station interface message send address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x3F0)++0x3 line.long 0x0 "SIBLPR[$1],Station interface boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "VSIIER,Virtual station interface interrupt enable register" bitfld.long 0x0 9. "MRIE,Message received interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 8. "MSIE,Message sent interrupt enable 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "VSIIDR,Virtual station interface interrupt detect register" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" eventfld.long 0x0 9. "MR,Message received 0 No message 1 Message received from PSI see VSIMSGRR" "0,1" eventfld.long 0x0 8. "MS,Message sent 0 Message sent to PSI has not completed 1 Message sent to PSI has completed and response received" "0,1" newline rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CE88000 ad:0x4CE88200 ad:0x4CE88400 ad:0x4CE88600 ad:0x4CE88800 ad:0x4CE88A00 ad:0x4CE88C00 ad:0x4CE88E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC_VSI3" base ad:0x4CEA0000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" group.long 0x48++0x3 line.long 0x0 "SICCAR,Station interface command cache attribute register" bitfld.long 0x0 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" rgroup.long 0x204++0x7 line.long 0x0 "VSIMSGSR,Virtual station interface message send register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field may provide additional information about the completion status of the command" bitfld.long 0x0 1. "MS,Message status The status bit indicates if the command was executed successfully" "0,1" bitfld.long 0x0 0. "MB,Message busy This bit will clear automatically and status field MS set accordingly" "0,1" line.long 0x4 "VSIMSGRR,Virtual station interface message receive register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value from the PSI." bitfld.long 0x4 0. "MR,Message Received When set indicates that a message provided by field MC has been received from the PSI" "0,1" group.long 0x210++0x7 line.long 0x0 "VSIMSGSNDAR0,Virtual station interface message send register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message to be sent. Message is 32B address aligned." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes" line.long 0x4 "VSIMSGSNDAR1,Virtual station interface message send address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x3F0)++0x3 line.long 0x0 "SIBLPR[$1],Station interface boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "VSIIER,Virtual station interface interrupt enable register" bitfld.long 0x0 9. "MRIE,Message received interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 8. "MSIE,Message sent interrupt enable 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "VSIIDR,Virtual station interface interrupt detect register" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" eventfld.long 0x0 9. "MR,Message received 0 No message 1 Message received from PSI see VSIMSGRR" "0,1" eventfld.long 0x0 8. "MS,Message sent 0 Message sent to PSI has not completed 1 Message sent to PSI has completed and response received" "0,1" newline rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CEA8000 ad:0x4CEA8200 ad:0x4CEA8400 ad:0x4CEA8600 ad:0x4CEA8800 ad:0x4CEA8A00 ad:0x4CEA8C00 ad:0x4CEA8E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC_VSI4" base ad:0x4CEC0000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" group.long 0x48++0x3 line.long 0x0 "SICCAR,Station interface command cache attribute register" bitfld.long 0x0 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" rgroup.long 0x204++0x7 line.long 0x0 "VSIMSGSR,Virtual station interface message send register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field may provide additional information about the completion status of the command" bitfld.long 0x0 1. "MS,Message status The status bit indicates if the command was executed successfully" "0,1" bitfld.long 0x0 0. "MB,Message busy This bit will clear automatically and status field MS set accordingly" "0,1" line.long 0x4 "VSIMSGRR,Virtual station interface message receive register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value from the PSI." bitfld.long 0x4 0. "MR,Message Received When set indicates that a message provided by field MC has been received from the PSI" "0,1" group.long 0x210++0x7 line.long 0x0 "VSIMSGSNDAR0,Virtual station interface message send register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message to be sent. Message is 32B address aligned." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes" line.long 0x4 "VSIMSGSNDAR1,Virtual station interface message send address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x3F0)++0x3 line.long 0x0 "SIBLPR[$1],Station interface boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "VSIIER,Virtual station interface interrupt enable register" bitfld.long 0x0 9. "MRIE,Message received interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 8. "MSIE,Message sent interrupt enable 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "VSIIDR,Virtual station interface interrupt detect register" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" eventfld.long 0x0 9. "MR,Message received 0 No message 1 Message received from PSI see VSIMSGRR" "0,1" eventfld.long 0x0 8. "MS,Message sent 0 Message sent to PSI has not completed 1 Message sent to PSI has completed and response received" "0,1" newline rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CEC8000 ad:0x4CEC8200 ad:0x4CEC8400 ad:0x4CEC8600 ad:0x4CEC8800 ad:0x4CEC8A00 ad:0x4CEC8C00 ad:0x4CEC8E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree "ENETC_VSI5" base ad:0x4CEE0000 group.long 0x0++0x3 line.long 0x0 "SIMR,Station interface mode register" bitfld.long 0x0 31. "EN,Enable station interface" "0,1" bitfld.long 0x0 16.--18. "DEFAULT_RX_GROUP,Default receive group The default receive group is used when HTA Receive processing has yield no explicit group" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "V2IPVE,VLAN to IPV mapping enable Maps the VLAN PCP/DEI to internal priority value (IPV)" "0,1" newline bitfld.long 0x0 3. "RNBM,Receive no broad-cast mode Suppresses broad-cast receive for the SI" "0,1" bitfld.long 0x0 2. "RNMM,Receive no multi-cast mode Suppresses multi-cast receive for the SI" "0,1" bitfld.long 0x0 1. "RNUM,Receive no unicast-cast mode Suppresses uni-cast receive for the SI" "0,1" newline bitfld.long 0x0 0. "RSSE,RSS classification enable 0 RSS classification is disabled 1 RSS classification is enabled This field is valid if SIPCAPR0[RSS] is set to 1" "0,1" rgroup.long 0x4++0x3 line.long 0x0 "SISR,Station interface status register" bitfld.long 0x0 4. "VLAN_UTA,SI VLAN untagged frames accepted" "0,1" bitfld.long 0x0 3. "VLAN_P,SI VLAN promiscuous" "0,1" bitfld.long 0x0 2. "MAC_MP,SI MAC multicast promiscuous" "0,1" newline bitfld.long 0x0 1. "MAC_UP,SI MAC unicast promiscuous" "0,1" bitfld.long 0x0 0. "TX_BUSY,Transmit busy" "0,1" rgroup.long 0x18++0xF line.long 0x0 "SICTR0,Station interface current time register 0" hexmask.long 0x0 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - low order 32-bits (31-0)" line.long 0x4 "SICTR1,Station interface current time register 1" hexmask.long 0x4 0.--31. 1. "CURR_TIME,Time in units of nanoseconds - high order 32-bits (63-32)" line.long 0x8 "SIPCAPR0,Station interface port capability register 0" bitfld.long 0x8 16. "FS,Functional safety capability supported." "0,1" bitfld.long 0x8 13. "WO,Support for Wake-on-LAN in low-power mode 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 11. "RP,Support Rate Policing." "0,1" newline bitfld.long 0x8 10. "IPFLT,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 9. "PSFP,Support Per-Stream Filtering and Policing ( IEEE 802.1Qci)." "0,1" bitfld.long 0x8 8. "RSS,Support for RSS 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 6. "CBS,802.1 Qav Credit Base Shaping (CBS). When set QAV is supported. 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 5. "TSD,Support for time specific departure 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 4. "TGS,Support for time gate Scheduling (IEEE 802.1Qbv)." "0,1" newline bitfld.long 0x8 3. "FP,Support for Frame Preemption 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 2. "RFS,Receive flow steering support 0 Not supported 1 Supported" "0,1" bitfld.long 0x8 1. "LSO,Support for LSO 0 Not supported 1 Supported" "0,1" newline bitfld.long 0x8 0. "RSC,Support for RSC 0 Not supported 1 Supported" "0,1" line.long 0xC "SIPCAPR1,Station interface port capability register 1" bitfld.long 0xC 31. "NUM_IPV,Indicates the number of IPVs supported. 0: 8 IPVs 1: 16 IPVs" "0,1" hexmask.long.byte 0xC 12.--17. 1. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function Range: 1..64 Formula: NUM_MSIX+1" bitfld.long 0xC 10.--11. "NUM_UCH,Number of unicast hash entries (1 bit per entry) per SI 00 64 unicast addresses 01 128 unicast addresses 10 256 unicast addresses 11 512 unicast addresses" "0,1,2,3" newline bitfld.long 0xC 8.--9. "NUM_MCH,Number of multicast hash entries per SI 00 64 multicast addresses 01 128 multicast addresses 10 256 multicast addresses 11 512 multicast addresses" "0,1,2,3" bitfld.long 0xC 4.--6. "NUM_TCS,Number of traffic classes 0 - 1 Traffic class (0) 1 - 2 Traffic classes (0-1)" "0,1,2,3,4,5,6,7" rgroup.long 0x30++0x3 line.long 0x0 "SITSR,Station interface timer status register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" group.long 0x38++0x3 line.long 0x0 "SIRBGCR,Station interface receive BDR group control register" bitfld.long 0x0 16.--18. "RINGS_PER_GROUP,Number of rings per group The number of rings per groups is RINGS_PER_GROUP + 1 e" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "NUM_GROUPS,Number of groups Number of groups used 0-6" "0,1,2,3,4,5,6,7" group.long 0x40++0x3 line.long 0x0 "SIBCAR,Station interface buffer cache attribute register" bitfld.long 0x0 30.--31. "RDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "BD_RDSNP,Buffer descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "BD_RDCACHE,Buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "WRSNP,Write data snoop This is the snoop attribute setting used when switch writes command data to memory" "0,1,2,3" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "BD_WRSNP,Buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "BD_WRCACHE,Buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" group.long 0x48++0x3 line.long 0x0 "SICCAR,Station interface command cache attribute register" bitfld.long 0x0 30.--31. "CRDSNP,Read data snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 28.--29. "CRDDOMAIN,Read data domain This is the domain attribute setting used when NETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "CRDCACHE,Read data cache type This is the cache attribute setting used when NETC reads frame data from memory for transmit" newline bitfld.long 0x0 22.--23. "CBD_RDSNP,Command descriptor read snoop The setting is a decoded value with the following mapping: 0 - ARSNOOP[3:0] = b0000 (ReadNoSnoop/ReadOnce) 1 - ARSNOOP[3:0] = b0001 (ReadShared) All other values reserved" "0: ARSNOOP[3:0] = b0000,1: ARSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 20.--21. "CBD_RDDOMAIN,Command buffer descriptor read domain This is the domain attribute setting used when NETC read the buffer descriptor from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "CBD_RDCACHE,Command buffer descriptor read cache type This is the cache attribute setting used when NETC read the buffer descriptor from memory for transmit" newline bitfld.long 0x0 14.--15. "CWRSNP,Write data snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 12.--13. "CWRDOMAIN,Write data domain This is the domain attribute setting used when NETC writes frame data to memory on receive" "0,1,2,3" hexmask.long.byte 0x0 8.--11. 1. "CWRCACHE,Write data cache type This is the cache attribute setting used when NETC writes frame data to memory on receive" newline bitfld.long 0x0 6.--7. "CBD_WRSNP,Command buffer descriptor write snoop The setting is a decoded value with the following mapping: 0 - AWSNOOP[3:0] = b0000 (WriteNoSnoop/WriteUniquePtl) 1 - AWSNOOP[3:0] = b0001 (WriteUniqueFull) All other values reserved" "0: AWSNOOP[3:0] = b0000,1: AWSNOOP[3:0] = b0001,?,?" bitfld.long 0x0 4.--5. "CBD_WRDOMAIN,Command buffer descriptor write domain This is the domain attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "CBD_WRCACHE,Command buffer descriptor write cache type This is the cache attribute setting used when NETC writes the buffer descriptor to memory which includes receive and transmit BD update" rgroup.long 0x80++0x7 line.long 0x0 "SIPMAR0,Station interface primary MAC address register 0" hexmask.long 0x0 0.--31. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" line.long 0x4 "SIPMAR1,Station interface primary MAC address register 1" hexmask.long.word 0x4 0.--15. 1. "PRIM_MAC_ADDR,Primary MAC address This field is defined in network byte order (big-endian)" rgroup.long 0x90++0x7 line.long 0x0 "SICVLANR1,Station interface custom VLAN register 1" bitfld.long 0x0 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x0 0.--15. 1. "ETYPE,Ethertype" line.long 0x4 "SICVLANR2,Station interface custom VLAN register 2" bitfld.long 0x4 31. "V,0 not valid 1 valid" "0,1" hexmask.long.word 0x4 0.--15. 1. "ETYPE,Ethertype" group.long 0x100++0x7 line.long 0x0 "SIVLANIPVMR0,Station interface VLAN to IPV mapping register 0" hexmask.long.byte 0x0 28.--31. 1. "PCP_DEI_7,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 24.--27. 1. "PCP_DEI_6,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 20.--23. 1. "PCP_DEI_5,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 16.--19. 1. "PCP_DEI_4,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 12.--15. 1. "PCP_DEI_3,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 8.--11. 1. "PCP_DEI_2,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x0 4.--7. 1. "PCP_DEI_1,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x0 0.--3. 1. "PCP_DEI_0,IPV value used for VLAN PCP+DEI attribute." line.long 0x4 "SIVLANIPVMR1,Station interface VLAN to IPV mapping register 1" hexmask.long.byte 0x4 28.--31. 1. "PCP_DEI_15,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 24.--27. 1. "PCP_DEI_14,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 20.--23. 1. "PCP_DEI_13,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 16.--19. 1. "PCP_DEI_12,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 12.--15. 1. "PCP_DEI_11,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 8.--11. 1. "PCP_DEI_10,IPV value used for VLAN PCP+DEI attribute." newline hexmask.long.byte 0x4 4.--7. 1. "PCP_DEI_9,IPV value used for VLAN PCP+DEI attribute." hexmask.long.byte 0x4 0.--3. 1. "PCP_DEI_8,IPV value used for VLAN PCP+DEI attribute." group.long 0x150++0x3 line.long 0x0 "SIIPVBDRMR0,Station interface IPV to ring mapping register" bitfld.long 0x0 28.--30. "IPV7BDR,BD ring used within the group for IPV 7." "0,1,2,3,4,5,6,7" bitfld.long 0x0 24.--26. "IPV6BDR,BD ring used within the group for IPV 6." "0,1,2,3,4,5,6,7" bitfld.long 0x0 20.--22. "IPV5BDR,BD ring used within the group for IPV 5." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16.--18. "IPV4BDR,BD ring used within the group for IPV 4." "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "IPV3BDR,BD ring used within the group for IPV 3." "0,1,2,3,4,5,6,7" bitfld.long 0x0 8.--10. "IPV2BDR,BD ring used within the group for IPV 2." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 4.--6. "IPV1BDR,BD ring used within the group for IPV 1." "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "IPV0BDR,BD ring used within the group for IPV 0." "0,1,2,3,4,5,6,7" rgroup.long 0x204++0x7 line.long 0x0 "VSIMSGSR,Virtual station interface message send register" hexmask.long.word 0x0 16.--31. 1. "MC,Message code This field may provide additional information about the completion status of the command" bitfld.long 0x0 1. "MS,Message status The status bit indicates if the command was executed successfully" "0,1" bitfld.long 0x0 0. "MB,Message busy This bit will clear automatically and status field MS set accordingly" "0,1" line.long 0x4 "VSIMSGRR,Virtual station interface message receive register" hexmask.long.word 0x4 16.--31. 1. "MC,Message code This field provides a user defined 16-bit message value from the PSI." bitfld.long 0x4 0. "MR,Message Received When set indicates that a message provided by field MC has been received from the PSI" "0,1" group.long 0x210++0x7 line.long 0x0 "VSIMSGSNDAR0,Virtual station interface message send register 0" hexmask.long 0x0 6.--31. 1. "ADDRL,Message address low Lower address bits 31-6 of message to be sent. Message is 32B address aligned." hexmask.long.byte 0x0 0.--4. 1. "MSIZE,Message size Size of message as a multiple of 32 bytes" line.long 0x4 "VSIMSGSNDAR1,Virtual station interface message send address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Message address high High address bits 63-32 of message to be sent." rgroup.long 0x300++0x43 line.long 0x0 "SIROCT0,Station interface receive octets counter (ifInOctets) 0" hexmask.long 0x0 0.--31. 1. "ROCT_LOW,Counter value - low-order bits 32-0" line.long 0x4 "SIROCT1,Station interface receive octets counter (ifInOctets) 1" hexmask.long 0x4 0.--31. 1. "ROCT_HIGH,Counter value - high-order bits 63-32" line.long 0x8 "SIRFRM0,Station interface receive frame counter (aFrameReceivedOK) 0" hexmask.long 0x8 0.--31. 1. "RFRM_LOW,Counter value - low-order bits 31-0" line.long 0xC "SIRFRM1,Station interface receive frame counter (aFrameReceivedOK) 1" hexmask.long 0xC 0.--31. 1. "RFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x10 "SIRUCA0,Station interface receive unicast frame counter (ifInUcastPkts) 0" hexmask.long 0x10 0.--31. 1. "RUCA_LOW,Counter value - low-order bits 31-0" line.long 0x14 "SIRUCA1,Station interface receive unicast frame counter (ifInUcastPkts) 1" hexmask.long 0x14 0.--31. 1. "RUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x18 "SIRMCA0,Station interface receive multicast frame counter (ifInMulticastPkts) 0" hexmask.long 0x18 0.--31. 1. "RMCA_LOW,Counter value - high-order bits 31-0" line.long 0x1C "SIRMCA1,Station interface receive multicast frame counter (ifInMulticastPkts) 1" hexmask.long 0x1C 0.--31. 1. "RMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x20 "SITOCT0,Station interface transmit octets counter (ifOutOctets) 0" hexmask.long 0x20 0.--31. 1. "TOCT_LOW,Counter value - low-order bits 31-0" line.long 0x24 "SITOCT1,Station interface transmit octets counter (ifOutOctets) 1" hexmask.long 0x24 0.--31. 1. "TOCT_HIGH,Counter value - high-order bits 63-32" line.long 0x28 "SITFRM0,Station interface transmit frame counter (aFrameTransmittedOK) 0" hexmask.long 0x28 0.--31. 1. "TFRM_LOW,Counter value - low-order bits 31-0" line.long 0x2C "SITFRM1,Station interface transmit frame counter (aFrameTransmittedOK) 1" hexmask.long 0x2C 0.--31. 1. "TFRM_HIGH,Counter value - high-order bits 63-32" line.long 0x30 "SITUCA0,Station interface transmit unicast frame counter (ifOutUcastPkts) 0" hexmask.long 0x30 0.--31. 1. "TUCA_LOW,Counter value - low-order bits 31-0" line.long 0x34 "SITUCA1,Station interface transmit unicast frame counter (ifOutUcastPkts) 1" hexmask.long 0x34 0.--31. 1. "TUCA_HIGH,Counter value - high-order bits 63-32" line.long 0x38 "SITMCA0,Station interface transmit multicast frame counter (ifOutMulticastPkts) 0" hexmask.long 0x38 0.--31. 1. "TMCA_LOW,Counter value - low-order bits 31-0" line.long 0x3C "SITMCA1,Station interface transmit multicast frame counter (ifOutMulticastPkts) 1" hexmask.long 0x3C 0.--31. 1. "TMCA_HIGH,Counter value - high-order bits 63-32" line.long 0x40 "SITDFCR,Station interface transmit discard frame counter" hexmask.long 0x40 0.--31. 1. "COUNT,Counter value" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x3F0)++0x3 line.long 0x0 "SIBLPR[$1],Station interface boot loader parameter register a" hexmask.long 0x0 0.--31. 1. "PARAM_VAL,Boot loader parameter value." repeat.end group.long 0x800++0x3 line.long 0x0 "SICBDRMR,Station interface command BDR mode register" bitfld.long 0x0 31. "EN,Enable command buffer descriptor ring 0 Disabled" "0,1" rgroup.long 0x804++0x3 line.long 0x0 "SICBDRSR,Station interface command BDR status register" bitfld.long 0x0 0. "BUSY,Busy. The command BD ring is busy processing commands 0 Idle 1 Busy" "0,1" group.long 0x810++0x13 line.long 0x0 "SICBDRBAR0,Station interface command BDR base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "SICBDRBAR1,Station interface command BDR base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "SICBDRPIR,Station interface command BDR producer index register" hexmask.long.word 0x8 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring producer index" line.long 0xC "SICBDRCIR,Station interface command BDR consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. A system bus error occurred during execution of the CBD command." "0,1" hexmask.long.word 0xC 0.--9. 1. "BDR_INDEX,Command buffer descriptor ring consumer index" line.long 0x10 "SICBDRLENR,Station interface command BDR length register" hexmask.long.byte 0x10 3.--10. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 1K." group.long 0x8A0++0x7 line.long 0x0 "SICBDRIER,Station interface command BDR interrupt enable register" bitfld.long 0x0 0. "CBDCIE,Command BD completion interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SICBDRIDR,Station interface command BDR interrupt detect register" eventfld.long 0x4 0. "CBDC,Command BD completed 0 No BD with CI=1 completed 1 Processed BD with CI=1" "0,1" rgroup.long 0x900++0xB line.long 0x0 "SICAPR0,Station interface capability register 0" hexmask.long.byte 0x0 28.--31. 1. "NUM_MAC_ADDR,Number of MAC addresses Formula: NUM_MAC_ADDR+1" hexmask.long.byte 0x0 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI" hexmask.long.byte 0x0 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI" line.long 0x4 "SICAPR1,Station interface capability register 1" hexmask.long.byte 0x4 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI" line.long 0x8 "SICAPR2,Station interface capability register 2" hexmask.long.byte 0x8 0.--3. 1. "VTP,VLAN types permitted Bit: 0 Standard C-VLAN 0x8100 1 Standard S-VLAN 0x88A8 2 Custom VLAN as defined by CVLANR1[ETYPE] 3 Custom VLAN as defined by CVLANR2[ETYPE]" group.long 0xA00++0x3 line.long 0x0 "VSIIER,Virtual station interface interrupt enable register" bitfld.long 0x0 9. "MRIE,Message received interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 8. "MSIE,Message sent interrupt enable 0 Disabled 1 Enabled" "0,1" group.long 0xA08++0x3 line.long 0x0 "VSIIDR,Virtual station interface interrupt detect register" rbitfld.long 0x0 16. "RXR,Summary of detected interrupts for all receive rings belonging to the SI 0 No interrupt detected for receive ring(s) 1 Interrupt detected for receive ring(s) see SIRXIDR Read only clear using SIRXIDR" "0,1" eventfld.long 0x0 9. "MR,Message received 0 No message 1 Message received from PSI see VSIMSGRR" "0,1" eventfld.long 0x0 8. "MS,Message sent 0 Message sent to PSI has not completed 1 Message sent to PSI has completed and response received" "0,1" newline rbitfld.long 0x0 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI 0 No interrupt detected for transmit ring(s) 1 Interrupt detected for transmit ring(s) see SITXIDR Read only clear using SITXIDR" "0,1" group.long 0xA18++0x7 line.long 0x0 "SITXIDR0,Station interface transmit interrupt detect register 0" eventfld.long 0x0 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Frame transmit interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Frame transmit interrupt detected for transmit ring 14" "0,1" eventfld.long 0x0 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Frame transmit interrupt detected for transmit ring 13" "0,1" newline eventfld.long 0x0 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Frame transmit interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Frame transmit interrupt detected for transmit ring 11" "0,1" eventfld.long 0x0 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Frame transmit interrupt detected for transmit ring 10" "0,1" newline eventfld.long 0x0 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Frame transmit interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Frame transmit interrupt detected for transmit ring 8" "0,1" eventfld.long 0x0 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Frame transmit interrupt detected for transmit ring 7" "0,1" newline eventfld.long 0x0 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Frame transmit interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Frame transmit interrupt detected for transmit ring 5" "0,1" eventfld.long 0x0 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Frame transmit interrupt detected for transmit ring 4" "0,1" newline eventfld.long 0x0 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Frame transmit interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Frame transmit interrupt detected for transmit ring 2" "0,1" eventfld.long 0x0 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Frame transmit interrupt detected for transmit ring 1" "0,1" newline eventfld.long 0x0 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Frame transmit interrupt detected for transmit ring 0" "0,1" eventfld.long 0x0 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI 0 No interrupt detected for transmit ring 15 1 Threshold interrupt detected for transmit ring 15" "0,1" eventfld.long 0x0 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI 0 No interrupt detected for transmit ring 14 1 Threshold interrupt detected for transmit ring 14" "0,1" newline eventfld.long 0x0 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI 0 No interrupt detected for transmit ring 13 1 Threshold interrupt detected for transmit ring 13" "0,1" eventfld.long 0x0 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI 0 No interrupt detected for transmit ring 12 1 Threshold interrupt detected for transmit ring 12" "0,1" eventfld.long 0x0 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI 0 No interrupt detected for transmit ring 11 1 Threshold interrupt detected for transmit ring 11" "0,1" newline eventfld.long 0x0 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI 0 No interrupt detected for transmit ring 10 1 Threshold interrupt detected for transmit ring 10" "0,1" eventfld.long 0x0 9. "TXT9,Summary of detected threshold interrupts for transmit ring 9 assigned to SI 0 No interrupt detected for transmit ring 9 1 Threshold interrupt detected for transmit ring 9" "0,1" eventfld.long 0x0 8. "TXT8,Summary of detected threshold interrupts for transmit ring 8 assigned to SI 0 No interrupt detected for transmit ring 8 1 Threshold interrupt detected for transmit ring 8" "0,1" newline eventfld.long 0x0 7. "TXT7,Summary of detected threshold interrupts for transmit ring 7 assigned to SI 0 No interrupt detected for transmit ring 7 1 Threshold interrupt detected for transmit ring 7" "0,1" eventfld.long 0x0 6. "TXT6,Summary of detected threshold interrupts for transmit ring 6 assigned to SI 0 No interrupt detected for transmit ring 6 1 Threshold interrupt detected for transmit ring 6" "0,1" eventfld.long 0x0 5. "TXT5,Summary of detected threshold interrupts for transmit ring 5 assigned to SI 0 No interrupt detected for transmit ring 5 1 Threshold interrupt detected for transmit ring 5" "0,1" newline eventfld.long 0x0 4. "TXT4,Summary of detected threshold interrupts for transmit ring 4 assigned to SI 0 No interrupt detected for transmit ring 4 1 Threshold interrupt detected for transmit ring 4" "0,1" eventfld.long 0x0 3. "TXT3,Summary of detected threshold interrupts for transmit ring 3 assigned to SI 0 No interrupt detected for transmit ring 3 1 Threshold interrupt detected for transmit ring 3" "0,1" eventfld.long 0x0 2. "TXT2,Summary of detected threshold interrupts for transmit ring 2 assigned to SI 0 No interrupt detected for transmit ring 2 1 Threshold interrupt detected for transmit ring 2" "0,1" newline eventfld.long 0x0 1. "TXT1,Summary of detected threshold interrupts for transmit ring 1 assigned to SI 0 No interrupt detected for transmit ring 1 1 Threshold interrupt detected for transmit ring 1" "0,1" eventfld.long 0x0 0. "TXT0,Summary of detected threshold interrupts for transmit ring 0 assigned to SI 0 No interrupt detected for transmit ring 0 1 Threshold interrupt detected for transmit ring 0" "0,1" line.long 0x4 "SITXIDR1,Station interface transmit interrupt detect register 1" eventfld.long 0x4 23. "TXF23,Summary of detected transmit frame interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Frame transmit interrupt detected for transmit ring 23" "0,1" eventfld.long 0x4 22. "TXF22,Summary of detected transmit frame interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Frame transmit interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 21. "TXF21,Summary of detected transmit frame interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Frame transmit interrupt detected for transmit ring 21" "0,1" newline eventfld.long 0x4 20. "TXF20,Summary of detected transmit frame interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Frame transmit interrupt detected for transmit ring 20" "0,1" eventfld.long 0x4 19. "TXF19,Summary of detected transmit frame interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Frame transmit interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 18. "TXF18,Summary of detected transmit frame interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Frame transmit interrupt detected for transmit ring 18" "0,1" newline eventfld.long 0x4 17. "TXF17,Summary of detected transmit frame interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Frame transmit interrupt detected for transmit ring 17" "0,1" eventfld.long 0x4 16. "TXF16,Summary of detected transmit frame interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Frame transmit interrupt detected for transmit ring 16" "0,1" eventfld.long 0x4 7. "TXT23,Summary of detected threshold interrupts for transmit ring 23 assigned to SI 0 No interrupt detected for transmit ring 23 1 Threshold interrupt detected for transmit ring 23" "0,1" newline eventfld.long 0x4 6. "TXT22,Summary of detected threshold interrupts for transmit ring 22 assigned to SI 0 No interrupt detected for transmit ring 22 1 Threshold interrupt detected for transmit ring 22" "0,1" eventfld.long 0x4 5. "TXT21,Summary of detected threshold interrupts for transmit ring 21 assigned to SI 0 No interrupt detected for transmit ring 21 1 Threshold interrupt detected for transmit ring 21" "0,1" eventfld.long 0x4 4. "TXT20,Summary of detected threshold interrupts for transmit ring 20 assigned to SI 0 No interrupt detected for transmit ring 20 1 Threshold interrupt detected for transmit ring 20" "0,1" newline eventfld.long 0x4 3. "TXT19,Summary of detected threshold interrupts for transmit ring 19 assigned to SI 0 No interrupt detected for transmit ring 19 1 Threshold interrupt detected for transmit ring 19" "0,1" eventfld.long 0x4 2. "TXT18,Summary of detected threshold interrupts for transmit ring 18 assigned to SI 0 No interrupt detected for transmit ring 18 1 Threshold interrupt detected for transmit ring 18" "0,1" eventfld.long 0x4 1. "TXT17,Summary of detected threshold interrupts for transmit ring 17 assigned to SI 0 No interrupt detected for transmit ring 17 1 Threshold interrupt detected for transmit ring 17" "0,1" newline eventfld.long 0x4 0. "TXT16,Summary of detected threshold interrupts for transmit ring 16 assigned to SI 0 No interrupt detected for transmit ring 16 1 Threshold interrupt detected for transmit ring 16" "0,1" group.long 0xA28++0x3 line.long 0x0 "SIRXIDR0,Station interface receive interrupt detect register 0" eventfld.long 0x0 23. "RX23,Summary of detected interrupts for receive ring 23 assigned to SI 0 No interrupt detected for receive ring 23 1 Interrupt detected for receive ring 23" "0,1" eventfld.long 0x0 22. "RX22,Summary of detected interrupts for receive ring 22 assigned to SI 0 No interrupt detected for receive ring 22 1 Interrupt detected for receive ring 22" "0,1" eventfld.long 0x0 21. "RX21,Summary of detected interrupts for receive ring 21 assigned to SI 0 No interrupt detected for receive ring 21 1 Interrupt detected for receive ring 21" "0,1" newline eventfld.long 0x0 20. "RX20,Summary of detected interrupts for receive ring 20 assigned to SI 0 No interrupt detected for receive ring 20 1 Interrupt detected for receive ring 20" "0,1" eventfld.long 0x0 19. "RX19,Summary of detected interrupts for receive ring 19 assigned to SI 0 No interrupt detected for receive ring 19 1 Interrupt detected for receive ring 19" "0,1" eventfld.long 0x0 18. "RX18,Summary of detected interrupts for receive ring 18 assigned to SI 0 No interrupt detected for receive ring 18 1 Interrupt detected for receive ring 18" "0,1" newline eventfld.long 0x0 17. "RX17,Summary of detected interrupts for receive ring 17 assigned to SI 0 No interrupt detected for receive ring 17 1 Interrupt detected for receive ring 17" "0,1" eventfld.long 0x0 16. "RX16,Summary of detected interrupts for receive ring 16 assigned to SI 0 No interrupt detected for receive ring 16 1 Interrupt detected for receive ring 16" "0,1" eventfld.long 0x0 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI 0 No interrupt detected for receive ring 15 1 Interrupt detected for receive ring 15" "0,1" newline eventfld.long 0x0 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI 0 No interrupt detected for receive ring 14 1 Interrupt detected for receive ring 14" "0,1" eventfld.long 0x0 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI 0 No interrupt detected for receive ring 13 1 Interrupt detected for receive ring 13" "0,1" eventfld.long 0x0 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI 0 No interrupt detected for receive ring 12 1 Interrupt detected for receive ring 12" "0,1" newline eventfld.long 0x0 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI 0 No interrupt detected for receive ring 11 1 Interrupt detected for receive ring 11" "0,1" eventfld.long 0x0 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI 0 No interrupt detected for receive ring 10 1 Interrupt detected for receive ring 10" "0,1" eventfld.long 0x0 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI 0 No interrupt detected for receive ring 9 1 Interrupt detected for receive ring 9" "0,1" newline eventfld.long 0x0 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI 0 No interrupt detected for receive ring 8 1 Interrupt detected for receive ring 8" "0,1" eventfld.long 0x0 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI 0 No interrupt detected for receive ring 7 1 Interrupt detected for receive ring 7" "0,1" eventfld.long 0x0 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI 0 No interrupt detected for receive ring 6 1 Interrupt detected for receive ring 6" "0,1" newline eventfld.long 0x0 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI 0 No interrupt detected for receive ring 5 1 Interrupt detected for receive ring 5" "0,1" eventfld.long 0x0 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI 0 No interrupt detected for receive ring 4 1 Interrupt detected for receive ring 4" "0,1" eventfld.long 0x0 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI 0 No interrupt detected for receive ring 3 1 Interrupt detected for receive ring 3" "0,1" newline eventfld.long 0x0 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI 0 No interrupt detected for receive ring 2 1 Interrupt detected for receive ring 2" "0,1" eventfld.long 0x0 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI 0 No interrupt detected for receive ring 1 1 Interrupt detected for receive ring 1" "0,1" eventfld.long 0x0 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI 0 No interrupt detected for receive ring 0 1 Interrupt detected for receive ring 0" "0,1" group.long 0xA30++0x7 line.long 0x0 "SIMSIVR,Station interface MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" line.long 0x4 "SICMSIVR,Station interface command MSI-X vector register" hexmask.long.byte 0x4 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" group.long 0xA40++0x7 line.long 0x0 "SITMRIER,Station interface timer interrupt enable register" bitfld.long 0x0 0. "SYNCE,Timer synchronous state change interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "SITMRIDR,Station interface timer interrupt detect register" eventfld.long 0x4 0. "SYNC,Timer synchronous state change detected when set." "0,1" group.long 0xA4C++0x3 line.long 0x0 "SITMRMSIVR,Station interface timer MSI-X vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB00)++0x3 line.long 0x0 "SIMSITRVR[$1],Station interface MSI-X transmit ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB80)++0x3 line.long 0x0 "SIMSIRRVR[$1],Station interface MSI-X receive ring a vector register" hexmask.long.byte 0x0 0.--5. 1. "VECTOR,Vector Index into MSI-X address/data table" repeat.end group.long 0xE00++0x7 line.long 0x0 "SICMECR,Station interface correctable memory error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SICMESR,Station interface correctable memory error status register" eventfld.long 0x4 31. "SBEE,Single-bit ECC error" "0,1" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE0C++0x3 line.long 0x0 "SICMECTR,Station interface correctable memory error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE10++0x7 line.long 0x0 "SIUPECR,Station interface uncorrectable programming error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUPESR,Station interface uncorrectable programming error status register" eventfld.long 0x4 31. "PE,Programming error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" rbitfld.long 0x4 3. "DROP_RING_SEL,Non-existing receive ring error." "0,1" newline rbitfld.long 0x4 2. "DROP_GRP_SEL,Non-existing receive group error." "0,1" rbitfld.long 0x4 1. "DROP_RING_EN,Station interface ring disabled drop error." "0,1" rbitfld.long 0x4 0. "DROP_SI_EN,Station interface disabled drop error." "0,1" rgroup.long 0xE1C++0x3 line.long 0x0 "SIUPECTR,Station interface uncorrectable programming error count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count" group.long 0xE20++0x7 line.long 0x0 "SIUNSBECR,Station interface uncorrectable non-fatal system bus error configuration register" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNSBESR,Station interface uncorrectable non-fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" rgroup.long 0xE2C++0x3 line.long 0x0 "SIUNSBECTR,Station interface uncorrectable non-fatal system bus error count register" hexmask.long.byte 0x0 0.--7. 1. "COUNT,Count" group.long 0xE30++0x7 line.long 0x0 "SIUFSBECR,Station interface uncorrectable fatal system bus error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFSBESR,Station interface uncorrectable fatal system bus error status register" eventfld.long 0x4 31. "SBE,System bus error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.byte 0x4 8.--11. 1. "SB_ID,System Bus ID" group.long 0xE40++0x7 line.long 0x0 "SIUNMECR,Station interface uncorrectable non-fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" hexmask.long.byte 0x0 0.--7. 1. "THRESHOLD,Threshold" line.long 0x4 "SIUNMESR0,Station interface uncorrectable non-fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" rgroup.long 0xE48++0x7 line.long 0x0 "SIUNMESR1,Station interface uncorrectable non-fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" line.long 0x4 "SIUNMECTR,Station interface uncorrectable non-fatal memory error count register" hexmask.long.byte 0x4 0.--7. 1. "COUNT,Count" group.long 0xE50++0x7 line.long 0x0 "SIUFMECR,Station interface uncorrectable fatal memory error configuration register" bitfld.long 0x0 31. "RD,Report disable" "0,1" line.long 0x4 "SIUFMESR0,Station interface uncorrectable fatal memory error status register 0" eventfld.long 0x4 31. "MBEE,Multi-bit ECC error" "0,1" rbitfld.long 0x4 30. "M,Multiple" "0,1" hexmask.long.word 0x4 16.--26. 1. "SYNDROME,Syndrome" newline hexmask.long.byte 0x4 8.--12. 1. "MEM_ID,Memory ID" hexmask.long.byte 0x4 0.--4. 1. "LINK_SLICE_ID,Link or Slice ID" rgroup.long 0xE58++0x3 line.long 0x0 "SIUFMESR1,Station interface uncorrectable fatal memory error status register 1" hexmask.long 0x0 0.--31. 1. "ADDR,Address" rgroup.long 0x1000++0x3 line.long 0x0 "SIMAFTCAPR,Station interface MAC address filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI" rgroup.long 0x1100++0x3 line.long 0x0 "SIVFTCAPR,Station interface VLAN filter table capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI" group.long 0x1300++0x7 line.long 0x0 "SILSOSFMR0,Station interface LSO segmentation flag mask register 0" hexmask.long.word 0x0 16.--27. 1. "TCP_MID_SEG,Middle TCP segment flag mask" hexmask.long.word 0x0 0.--11. 1. "TCP_1ST_SEG,First TCP segment flag mask" line.long 0x4 "SILSOSFMR1,Station interface LSO segmentation flag mask register 1" hexmask.long.word 0x4 0.--11. 1. "TCP_LAST_SEG,Last TCP segment flags" rgroup.long 0x1600++0x3 line.long 0x0 "SIRSSCAPR,Station interface RSS capability register" hexmask.long.word 0x0 16.--31. 1. "VERSIONS,Version bitmap indicating the Table version supported" hexmask.long.byte 0x0 0.--3. 1. "NUM_RSS,Number of receive side-scaling (RSS)" repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x4CEE8000 ad:0x4CEE8200 ad:0x4CEE8400 ad:0x4CEE8600 ad:0x4CEE8800 ad:0x4CEE8A00 ad:0x4CEE8C00 ad:0x4CEE8E00) tree "bdr_num[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "TBMR,Tx BDR a mode register" bitfld.long 0x0 31. "EN,Enable transmit buffer descriptor ring 0: Disabled" "0: Disabled,?" bitfld.long 0x0 24. "FWB,Force Writeback 0: Disabled" "0: Disabled,?" bitfld.long 0x0 9. "VIH,VLAN Insert Hint If set (b1) then SW intends to use VLAN insertion offload by providing VLAN tag data in the Tx BD" "0,1" bitfld.long 0x0 8. "CRC,User CRC provided Determines if user provides CRC32 (FCS) at the end of the frame" "0,1" bitfld.long 0x0 4.--6. "WRR,WRR weight Weight used for arbitration when two or more rings have the same priority within the same VSI" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "PRIO,Priority Priority of the transmit buffer descriptor ring" "0,1,2,3,4,5,6,7" line.long 0x4 "TBSR,Tx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this transmit ring including possibly the transmit BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "BUSY,Busy" "0,1" group.long ($2+0x10)++0x13 line.long 0x0 "TBBAR0,Tx BDR a base address register 0" hexmask.long 0x0 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x4 "TBBAR1,Tx BDR a base address register 1" hexmask.long 0x4 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x8 "TBPIR,Tx BDR a producer index register" hexmask.long.word 0x8 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring producer index" line.long 0xC "TBCIR,Tx BDR a consumer index register" rbitfld.long 0xC 31. "SBE,System Bus Error. This bit is a read-only shadow of the TBaSR[SBE] bit." "0,1" hexmask.long.word 0xC 16.--30. 1. "STAT_ID,Status identifier" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Transmit buffer descriptor ring consumer index" line.long 0x10 "TBLENR,Tx BDR a length register" hexmask.long.word 0x10 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs. Maximum ring size is 64K." group.long ($2+0xA0)++0x3 line.long 0x0 "TBIER,Tx BDR a interrupt enable register" bitfld.long 0x0 1. "TXFIE,Transmit frame interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TXTIE,Transmit threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0xA4)++0x3 line.long 0x0 "TBIDR,Tx BDR a interrupt detect register" bitfld.long 0x0 1. "TXF,Transmit of frame 0 No transmit of frame detected with BD[FI]=1 1 Transmit of frame detected with BD[FI]=1" "0,1" bitfld.long 0x0 0. "TXT,Transmit threshold 0 No threshold event detected 1 Transmit ring has transmitted at least the number of packets specified by TBaICR0[ICPT] or the threshold timer has expired since last transmitted packet as specified by TBaICR1[ICTT]" "0,1" group.long ($2+0xA8)++0x7 line.long 0x0 "TBICR0,Tx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.byte 0x0 0.--3. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets transmitted before raising an interrupt" line.long 0x4 "TBICR1,Tx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" group.long ($2+0x100)++0x1B line.long 0x0 "RBMR,Rx BDR a mode register" bitfld.long 0x0 31. "EN,Enable receive buffer descriptor ring 0 Disabled. 1 Enabled." "0,1" bitfld.long 0x0 8. "CRC,Indicates if CRC32 (FCS) is to be stripped or preserved at the end of the frame" "0,1" bitfld.long 0x0 6. "VTPD,VLAN tag presentation disable Controls whether the extracted VLAN tag is provided in the Rx BD" "0,1" bitfld.long 0x0 5. "VTE,VLAN tag extract enable Controls whether the outer VLAN as seen by the SI is extracted" "0,1" bitfld.long 0x0 4. "CM,Congestion mode Determines the congestion scheme for the receive ring" "0,1" bitfld.long 0x0 2. "BDS,BD Size A BD ring can use either the standard 16B or extended 32B buffer descriptor format" "0,1" bitfld.long 0x0 0. "AL,Header alignment If set an additional 2-byte alignment is applied to the header in the 1st buffer descriptor" "0,1" line.long 0x4 "RBSR,Rx BDR a status register" eventfld.long 0x4 16. "SBE,System bus error A system bus error has occurred during one or more transactions related to this receive ring including possibly the receive BD writeback entry itself" "0,1" rbitfld.long 0x4 0. "EMPTY,Ring is empty Indicates the ring is empty of received BDs. Valid when RBaMR[EN]=1." "0,1" line.long 0x8 "RBBSR,Rx BDR a buffer size register" hexmask.long.word 0x8 0.--15. 1. "BSIZE,Buffer size Indicates the buffer size for the buffer pool used" line.long 0xC "RBCIR,Rx BDR a consumer index register" hexmask.long.word 0xC 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring consumer index. Range of index depends on ring size RBaLENR[LENGTH]." line.long 0x10 "RBBAR0,Rx BDR a base address register 0" hexmask.long 0x10 7.--31. 1. "ADDRL,Lower address bits 31-7." line.long 0x14 "RBBAR1,Rx BDR a base address register 1" hexmask.long 0x14 0.--31. 1. "ADDRH,Upper address bits 63-32." line.long 0x18 "RBPIR,Rx BDR a producer index register" rbitfld.long 0x18 31. "SBE,System Bus Error. This bit is a read-only shadow of the RBaSR[SBE] bit." "0,1" hexmask.long.word 0x18 0.--15. 1. "BDR_INDEX,Receive buffer descriptor ring producer index. Range of index depends on ring size RBaLENR[LENGTH]." group.long ($2+0x120)++0x3 line.long 0x0 "RBLENR,Rx BDR a length register" hexmask.long.word 0x0 3.--16. 1. "LENGTH,BD ring length Size of ring in sets of 8 BDs" group.long ($2+0x130)++0x3 line.long 0x0 "RBRSCR,Rx BDR a RSC register" bitfld.long 0x0 31. "EN,Enable" "0,1" bitfld.long 0x0 29. "CT,Coalesce Timestamp" "0,1" bitfld.long 0x0 25. "IPV6_DIS,IPv6 Disable" "0,1" bitfld.long 0x0 24. "IPV4_DIS,IPv4 Disable" "0,1" hexmask.long.word 0x0 0.--15. 1. "SIZE,Large reassembly offload size Maximum frame size in bytes created by RSC during reassembly" rgroup.long ($2+0x180)++0x3 line.long 0x0 "RBDCR,Rx BDR a drop count register" hexmask.long 0x0 0.--31. 1. "COUNT,Count Number of frames dropped due to lack of receive buffer descriptors available." group.long ($2+0x1A0)++0x3 line.long 0x0 "RBIER,Rx BDR a interrupt enable register" bitfld.long 0x0 0. "RXTIE,Receive threshold interrupt enable 0 Disabled 1 Enabled" "0,1" rgroup.long ($2+0x1A4)++0x3 line.long 0x0 "RBIDR,Rx BDR a interrupt detect register" bitfld.long 0x0 0. "RXT,Receive threshold 0 No threshold event detected 1 Receive ring holds at least the number of packets specified by RBaICR0[ICPT] or the threshold timer has expired since last received packet as specified by RBaICR1[ICTT]" "0,1" group.long ($2+0x1A8)++0x7 line.long 0x0 "RBICR0,Rx BDR a interrupt coalescing register 0" bitfld.long 0x0 31. "ICEN,Interrupt coalescing enable 0 Interrupt coalescing is disabled 1 Interrupt coalescing is enabled" "0,1" hexmask.long.word 0x0 0.--8. 1. "ICPT,Interrupt coalescing packet threshold While interrupt coalescing is enabled ICEN=1 this values determines the minimum number of packets received before raising an interrupt" line.long 0x4 "RBICR1,Rx BDR a interrupt coalescing register 1" hexmask.long 0x4 0.--31. 1. "ICTT,Interrupt coalescing timer threshold specified in units of NETC clock cycles" tree.end repeat.end tree.end tree.end tree "NETC_TCU" base ad:0x4C800000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0x510++0x3 line.long 0x0 "tcu_scm,SCM test mode" hexmask.long.word 0x0 2.--17. 1. "scm_result,SCM results" bitfld.long 0x0 1. "scm_obst_rst_b,SCM obst rst b" "0,1" bitfld.long 0x0 0. "scm_test_mode,SCM test mode" "0,1" group.long 0x520++0x3 line.long 0x0 "tcu_scm_sel,SCM test sel" hexmask.long 0x0 0.--31. 1. "scm_sel,SCM clock sel" group.long 0x530++0x3 line.long 0x0 "tcu_enet_bs,enet_bs test mode" rbitfld.long 0x0 31. "enet_bs_tdo,enet_bs_tdo" "0,1" hexmask.long.byte 0x0 10.--14. 1. "enet_bs_rx_level,enet_bs_rx_level" bitfld.long 0x0 9. "enet_bs_rx_bigswing,enet_bs_rx_bigswing" "0,1" bitfld.long 0x0 8. "enet_bs_tx_lowswing,enet_bs_tx_lowswing" "0,1" newline bitfld.long 0x0 7. "enet_bs_sdr,enet_bs_sdr" "0,1" bitfld.long 0x0 6. "enet_bs_rx_init,enet_bs_rx_init" "0,1" bitfld.long 0x0 5. "enet_bs_ce,enet_bs_ce" "0,1" bitfld.long 0x0 4. "enet_bs_udr,enet_bs_udr" "0,1" newline bitfld.long 0x0 3. "enet_bs_cdr,enet_bs_cdr" "0,1" bitfld.long 0x0 2. "enet_bs_actest,enet_bs_actest" "0,1" bitfld.long 0x0 1. "enet_bs_acmode,enet_bs_acmode" "0,1" bitfld.long 0x0 0. "enet_bs_tdi,enet_bs tdi" "0,1" group.long 0x560++0x3 line.long 0x0 "tcu_dft_divider,observe MIX divider state and override it" bitfld.long 0x0 0. "tcu_dft_divider_disable,dft divider disable" "0,1" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 1. "tcu_fuse_obs_1,fuse observation" "0,1" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree "NETC_TMR" base ad:0x4CD80000 rgroup.long 0x0++0x3 line.long 0x0 "TMR_ID,Module ID Register" hexmask.long.word 0x0 16.--31. 1. "TMR_ID,Timer IP IP" hexmask.long.byte 0x0 8.--15. 1. "REV_MJ,Major revision" hexmask.long.byte 0x0 0.--7. 1. "REV_MN,Minor revision" rgroup.long 0x8++0x3 line.long 0x0 "TMR_CAPR,Timer Capability Register" bitfld.long 0x0 16. "NUM_MSIX,Number of MSI-x Vectors supported" "0,1" bitfld.long 0x0 2. "IEEE_8021AS_REV,Support 802.1AS-2020 by providing both a ns and free-running clock to the Ethernet MACs." "0,1" bitfld.long 0x0 1. "ECADJ,Enhanced 1588 nanosecond (ns) Timer Adjustment supported" "0,1" bitfld.long 0x0 0. "IEEE_1722,IEEE 1722 support 0 Not supported 1 Supported" "0,1" rgroup.long 0x20++0x17 line.long 0x0 "TMR_FRT_L,Timer free running time low register" hexmask.long 0x0 0.--31. 1. "TMR_FRT_L,Read-only copy of the free running time (lower 32b)" line.long 0x4 "TMR_FRT_H,Timer free running time high register" hexmask.long 0x4 0.--31. 1. "TMR_FRT_H,Read-only copy of the free running time (upper 32b)" line.long 0x8 "TMR_SRT_L,Timer synchronous time low register" hexmask.long 0x8 0.--31. 1. "TMR_SRT_L,Read-only copy of the synchronous time (lower 32b)" line.long 0xC "TMR_SRT_H,Timer synchronous time high register." hexmask.long 0xC 0.--31. 1. "TMR_SRT_H,Read-only copy of the synchronous time (upper 32b)" line.long 0x10 "TMR_DEF_CNT_L,Default ns timer counter low register" hexmask.long 0x10 0.--31. 1. "TMR_DEF_CNT_L,Read-only copy of the Default ns time counter (lower 32b)" line.long 0x14 "TMR_DEF_CNT_H,Default ns timer counter high register" hexmask.long 0x14 0.--31. 1. "TMR_DEF_CNT_H,Read-only copy of the Default ns time counter (upper 32b)" group.long 0x80++0xF line.long 0x0 "TMR_CTRL,Timer Control Register" bitfld.long 0x0 31. "ALM1P,Alarm1 output polarity" "0,1" bitfld.long 0x0 30. "ALM2P,Alarm2 output polarity" "0,1" bitfld.long 0x0 29. "SHADOW_DIS,shadow Register disable" "0,1" bitfld.long 0x0 28. "FS,FIPER start indication" "0,1" bitfld.long 0x0 27. "PP1L,Fiper1 pulse loopback mode enabled" "0,1" newline bitfld.long 0x0 26. "PP2L,Fiper2 pulse loopback mode enabled" "0,1" hexmask.long.word 0x0 16.--25. 1. "TCLK_PERIOD,1588 timer reference clock period" bitfld.long 0x0 15. "COMP_MODE,Mode bit to allow atomic writes to TCLK_PERIOD and TMR_ADD" "0,1" bitfld.long 0x0 9. "ETEP2,External trigger 2 edge polarity" "0,1" bitfld.long 0x0 8. "ETEP1,External trigger 1 edge polarity" "0,1" newline bitfld.long 0x0 7. "COPH,Generated clock (TMR_GCLK) output phase." "0,1" bitfld.long 0x0 6. "CIPH,External oscillator input clock phase" "0,1" bitfld.long 0x0 2. "TE,1588 timer enable" "0,1" bitfld.long 0x0 0.--1. "CK_SEL,1588 timer reference clock source select" "0,1,2,3" line.long 0x4 "TMR_TEVENT,Timer Event Register" eventfld.long 0x4 29. "ETS2_OVEN,External trigger 2 timestamp FIFO Overflow event occured" "0,1" eventfld.long 0x4 28. "ETS1_OVEN,External trigger 1 timestamp FIFO Overflow event occured" "0,1" eventfld.long 0x4 25. "ETS2EN,External trigger 2 new timestamp sample event available" "0,1" eventfld.long 0x4 24. "ETS1EN,External trigger 1 new timestamp sample event available" "0,1" eventfld.long 0x4 21. "ETS2_THREN,External trigger 2 timestamp FIFO Threshold Level Hit" "0,1" newline eventfld.long 0x4 20. "ETS1_THREN,External trigger 1 timestamp FIFO Threshold Level Hit" "0,1" eventfld.long 0x4 17. "ALM2EN,Timer ALM1 event enable" "0,1" eventfld.long 0x4 16. "ALM1EN,Timer ALM2 event enable" "0,1" eventfld.long 0x4 7. "PP1EN,Periodic pulse event 1 enable" "0,1" eventfld.long 0x4 6. "PP2EN,Periodic pulse event 2 enable" "0,1" newline eventfld.long 0x4 5. "PP3EN,Periodic pulse event 3 enable" "0,1" line.long 0x8 "TMR_TEMASK,Timer event mask register" bitfld.long 0x8 29. "ETS2_OVEN,External trigger 2 timestamp FIFO Overflow event interrupt enabled" "0,1" bitfld.long 0x8 28. "ETS1_OVEN,External trigger 1 timestamp FIFO Overflow event interrupt enabled" "0,1" bitfld.long 0x8 25. "ETS2EN,External trigger 2 new timestamp sample event available interrupt enable" "0,1" bitfld.long 0x8 24. "ETS1EN,External trigger 1 new timestamp sample event available interrupt enable" "0,1" bitfld.long 0x8 21. "ETS2_THREN,External trigger 2 timestamp FIFO Threshold Level Hit event enable" "0,1" newline bitfld.long 0x8 20. "ETS1_THREN,External trigger 1 timestamp FIFO Threshold Level Hit event enable" "0,1" bitfld.long 0x8 17. "ALM2EN,Timer ALM1 event enable" "0,1" bitfld.long 0x8 16. "ALM1EN,Timer ALM2 event enable" "0,1" bitfld.long 0x8 7. "PP1EN,Periodic pulse event 1 enable" "0,1" bitfld.long 0x8 6. "PP2EN,Periodic pulse event 2 enable" "0,1" newline bitfld.long 0x8 5. "PP3EN,Periodic pulse event 3 enable" "0,1" line.long 0xC "TMR_MSIVEC,Timer MSI-X vector register" bitfld.long 0xC 0. "VECTOR,Vector" "0,1" rgroup.long 0x94++0x3 line.long 0x0 "TMR_STAT,Timer status register" bitfld.long 0x0 31. "RCD,Timer Reference Clock Detected" "0,1" bitfld.long 0x0 25. "ETS2_VLD,External trigger 2 Valid time-stamp 0 all valid external trigger time-stamps have been read 1 external trigger has an unread valid time-stamp value" "0,1" bitfld.long 0x0 24. "ETS1_VLD,External trigger 1 Valid time-stamp 0 all valid external trigger time-stamps have been read 1 external trigger has an unread valid time-stamp value" "0,1" group.long 0xA0++0x3 line.long 0x0 "TMR_ADD,Timer addend register" hexmask.long 0x0 0.--31. 1. "ADDEND,Timer addend." rgroup.long 0xA4++0x3 line.long 0x0 "TMR_ACC,Timer accumulator register" hexmask.long 0x0 0.--31. 1. "TMR_ACC,32-bit timer accumulator register" group.long 0xA8++0x7 line.long 0x0 "TMR_PRSC,Timer prescale register" hexmask.long.word 0x0 0.--15. 1. "PRSC_OCK,Output clock division prescale factor." line.long 0x4 "TMR_ECTRL,Extended timer control register" hexmask.long.byte 0x4 0.--3. 1. "ETFF_THR,External trigger FIFO threshold." group.long 0xB8++0xF line.long 0x0 "TMR_ALARM1_L,Alarm 1 time comparator low register" hexmask.long 0x0 0.--31. 1. "ALARM_L,Alarm time comparator register." line.long 0x4 "TMR_ALARM1_H,Alarm 1 time comparator high register" hexmask.long 0x4 0.--31. 1. "ALARM_H,Alarm time comparator register." line.long 0x8 "TMR_ALARM2_L,Alarm 2 time comparator low register" hexmask.long 0x8 0.--31. 1. "ALARM_L,Alarm time comparator register." line.long 0xC "TMR_ALARM2_H,Alarm 2 time comparator high register" hexmask.long 0xC 0.--31. 1. "ALARM_H,Alarm time comparator register." group.long 0xCC++0x3 line.long 0x0 "TMR_ALARM_CTRL,Timer Alarm Control Register" bitfld.long 0x0 15. "PG2,Alarm2 pulse generation time" "0,1" hexmask.long.byte 0x0 8.--12. 1. "ALARM2_PW,ALARM 2 pulse width selector" bitfld.long 0x0 7. "PG1,Alarm1 pulse generation time" "0,1" hexmask.long.byte 0x0 0.--4. 1. "ALARM1_PW,ALARM 1 pulse width selector" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD0)++0x3 line.long 0x0 "TMR_FIPER$1,Timer i fixed interval period register" hexmask.long 0x0 0.--31. 1. "FIPER,Fixed interval pulse period register." repeat.end group.long 0xDC++0x3 line.long 0x0 "TMR_FIPER_CTRL,Timer FIPER Control Register" bitfld.long 0x0 23. "FIPER3_DIS,FIPER3 disable" "0,1" bitfld.long 0x0 22. "PG3,FIPER3 pulse generation time" "0,1" hexmask.long.byte 0x0 16.--20. 1. "FIPER3_PW,FIPER 3 pulse width selection" bitfld.long 0x0 15. "FIPER2_DIS,FIPER2 disable" "0,1" bitfld.long 0x0 14. "PG2,FIPER2 pulse generation time" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "FIPER2_PW,FIPER 2 pulse width selection" bitfld.long 0x0 7. "FIPER1_DIS,FIPER1 disable" "0,1" bitfld.long 0x0 6. "PG1,FIPER1 pulse generation select" "0,1" hexmask.long.byte 0x0 0.--4. 1. "FIPER1_PW,FIPER 1 pulse width selection" rgroup.long 0xE0++0x17 line.long 0x0 "TMR_ETTS1_L,External trigger stamp register" hexmask.long 0x0 0.--31. 1. "ETTS_L,Time stamp field at the programmable edge of the external trigger" line.long 0x4 "TMR_ETTS1_H,External trigger stamp register" hexmask.long 0x4 0.--31. 1. "ETTS_H,Time stamp field at the programmable edge of the external trigger" line.long 0x8 "TMR_ETTS2_L,External trigger stamp register" hexmask.long 0x8 0.--31. 1. "ETTS_L,Time stamp field at the programmable edge of the external trigger" line.long 0xC "TMR_ETTS2_H,External trigger stamp register" hexmask.long 0xC 0.--31. 1. "ETTS_H,Time stamp field at the programmable edge of the external trigger" line.long 0x10 "TMR_CUR_TIME_L,Timer current time low register" hexmask.long 0x10 0.--31. 1. "TMR_CUR_TIME_L,Read-only copy of current time (lower 32b)" line.long 0x14 "TMR_CUR_TIME_H,Timer current time high register" hexmask.long 0x14 0.--31. 1. "TMR_CUR_TIME_H,Read-only copy of current time (upper 32b)" group.long 0xF8++0x3 line.long 0x0 "TMR_PARAM,Timer parameter register" hexmask.long 0x0 1.--31. 1. "PARAM_VAL,User specific parameter values" bitfld.long 0x0 0. "SYNC,Timer synchronization" "0,1" repeat 2. (list 0x0 0x1)(list ad:0x4CD80100 ad:0x4CD80120) tree "avtp_num[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "PTCMR,Port timer control mode register b" hexmask.long.byte 0x0 11.--15. 1. "TPCW,Timer PulseWidth Control Specify the pulse width associated with TMODE values of 1001 or 1010" hexmask.long.byte 0x0 5.--10. 1. "THRESHOLD,Timer ring threshold This field sets the threshold of the ring" bitfld.long 0x0 4. "TDRE,Timer DMA request enable This bit also enables the receive timestamp array" "0,1" hexmask.long.byte 0x0 0.--3. 1. "TMODE,Timer channel mode When changing the timer mode always disable the channel and read this register to verify the channel is disabled first" rgroup.long ($2+0x4)++0x3 line.long 0x0 "PTCSR,Port timer control status register b" bitfld.long 0x0 3. "TAE,Timer AXI Error Set when and AXI error is encountered." "0,1" bitfld.long 0x0 2. "TTC,Timer threshold crossed Set when the threshold of the ring is exceeded." "0,1" bitfld.long 0x0 1. "TRF,Timer ring full/empty Set when ring is full when configured for capture or empty when configured for compare" "0,1" bitfld.long 0x0 0. "TF,Timer flag Set when input capture or output compare occurs" "0,1" group.long ($2+0x8)++0x17 line.long 0x0 "PTSTDR,Port time-stamp transit delay register b" hexmask.long 0x0 0.--31. 1. "TD,Transit delay in nanoseconds Transit delay which will be added to the packet time-stamp value for future presentation" line.long 0x4 "PTCCR,Port timer compare capture register b" hexmask.long 0x4 0.--31. 1. "TCC,Timer Capture Compare When configured for compare this register represents the next compare value against the lower 32-bits of the 1588 PTP timer value" line.long 0x8 "PTSAUBAR,Port timestamp array upper base register b" hexmask.long 0x8 0.--31. 1. "BASE_UADDR,Upper address bits 63-32." line.long 0xC "PTSALBAR,Port timestamp array lower base register b" hexmask.long.tbyte 0xC 8.--31. 1. "BASE_LADDR,Lower address bits 32-8." line.long 0x10 "PTSACIR,Port timestamp array consumer index register b" hexmask.long.byte 0x10 0.--6. 1. "CI,Consumer index 0-63." line.long 0x14 "PTSAPIR,Port timestamp array producer index register b" hexmask.long.byte 0x14 0.--6. 1. "PI,Producer index 0-63." tree.end repeat.end base ad:0x4CD80000 group.long 0x1A0++0xB line.long 0x0 "PIER,Port interrupt enable register" bitfld.long 0x0 7. "TAE1IE,Timer AXI error 1 interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 6. "TTC1IE,Timer threshold crossed 1 interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 5. "TRF1IE,Timer ring full/empty/empty 1 interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 4. "TF1IE,Timer flag 1 interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 3. "TAE0IE,Timer AXI error 0 interrupt enable 0 Disabled 1 Enabled" "0,1" newline bitfld.long 0x0 2. "TTC0IE,Timer threshold crossed 0 interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 1. "TRF0IE,Timer ring full/empty 0 interrupt enable 0 Disabled 1 Enabled" "0,1" bitfld.long 0x0 0. "TF0IE,Timer flag 0 interrupt enable 0 Disabled 1 Enabled" "0,1" line.long 0x4 "PIDR,Port interrupt detect register" eventfld.long 0x4 7. "TAE1,Timer AXI Error for channel 1 Set when when the threshold of the ring is exceeded" "0,1" eventfld.long 0x4 6. "TTC1,Timer threshold crossed flag for channel 1 Set when when the threshold of the ring is exceeded" "0,1" eventfld.long 0x4 5. "TRF1,Timer ring full/empty flag for channel 1 Set when ring is full when configured for capture or empty when configured for compare" "0,1" eventfld.long 0x4 4. "TF1,Timer flag for channel 1 0 Flag not set 1 Flag set" "0,1" eventfld.long 0x4 3. "TAE0,Timer AXI Error for channel 0 Set when when the threshold of the ring is exceeded" "0,1" newline eventfld.long 0x4 2. "TTC0,Timer threshold crossed flag for channel 0 Set when when the threshold of the ring is exceeded" "0,1" eventfld.long 0x4 1. "TRF0,Timer ring full/empty flag for channel 0 Set when ring is full when configured for capture or empty when configured for compare" "0,1" eventfld.long 0x4 0. "TF0,Timer flag for channel 0 0 Flag not set 1 Flag set" "0,1" line.long 0x8 "PMSIVR,Port MSI-X vector register" bitfld.long 0x8 0. "VECTOR,Vector Index into MSI-X address/data table." "0,1" group.long 0x1B0++0x3 line.long 0x0 "TMR_CAR,Timer interface cache attribute register 0" bitfld.long 0x0 30. "RDSNP,Read data snoop See table above for valid settings." "0,1" bitfld.long 0x0 28.--29. "RDDOMAIN,Read data domain This is the domain attribute setting used when ENETC reads frame data from memory for transmit" "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "RDCACHE,Read data cache type This is the cache attribute setting used when ENETC reads frame data from memory for transmit" bitfld.long 0x0 14. "WRSNP,Write data snoop See table above for valid settings." "0,1" bitfld.long 0x0 12.--13. "WRDOMAIN,Write data domain This is the domain attribute setting used when ENETC writes frame data to memory on receive" "0,1,2,3" newline hexmask.long.byte 0x0 8.--11. 1. "WRCACHE,Write data cache type This is the cache attribute setting used when ENETC writes frame data to memory on receive" tree.end tree.end tree "NOC (Network-on-Chip Domain)" base ad:0x0 tree "NOC_BLK_CTRL_NOCMIX" base ad:0x49000000 group.long 0x0++0xF line.long 0x0 "DEXSC_ERR,DEXSC error response configuration" bitfld.long 0x0 18. "DRAM_LOCK_ERR_RESP_EN,DRAM lock error response enable" "0,1" bitfld.long 0x0 17. "DRAM_EXC_ERR_RESP_EN,DRAM exclusive access error response enable" "0,1" bitfld.long 0x0 16. "DRAM_ERR_RESP_EN,DRAM error response enable" "0,1" bitfld.long 0x0 2. "OCRAM_LOCK_ERR_RESP_EN,OCRAM lock error response enable" "0,1" newline bitfld.long 0x0 1. "OCRAM_EXC_ERR_RESP_EN,OCRAM exclusive access error response enable" "0,1" bitfld.long 0x0 0. "OCRAM_ERR_RESP_EN,OCRAM error response enable" "0,1" line.long 0x4 "OCRAM_RMW,OCRAM RMW configuration" bitfld.long 0x4 0. "RMW_WAIT_BVALID,RMW wait BVALID" "0,1" line.long 0x8 "AXI_LIMIT_WAKEUPMIX,AXI limit wakeupmix configuration" hexmask.long.word 0x8 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x8 0. "ENABLE,Enable beat limiter" "0,1" line.long 0xC "CACHE_ATTR,AxCACHE[1] override configuration register" bitfld.long 0xC 21. "HSIOMIX_AWCACHE,HSIOMIX AWCACHE[1] override value" "0,1" bitfld.long 0xC 20. "HSIOMIX_ARCACHE,HSIOMIX ARCACHE[1] override value" "0,1" bitfld.long 0xC 19. "CACHE_AWCACHE,CACHE AWCACHE[1] override value" "0,1" bitfld.long 0xC 18. "CACHE_ARCACHE,CACHE ARCACHE[1] override value" "0,1" newline bitfld.long 0xC 17. "WAKEUPMIX_AWCACHE,WAKEUPMIX AWCACHE[1] override value" "0,1" bitfld.long 0xC 16. "WAKEUPMIX_ARCACHE,WAKEUPMIX ARCACHE[1] override value" "0,1" bitfld.long 0xC 5. "HSIOMIX_AWCACHE_EN,HSIOMIX AWCACHE[1] override enable" "0,1" bitfld.long 0xC 4. "HSIOMIX_ARCACHE_EN,HSIOMIX ARCACHE[1] override enable" "0,1" newline bitfld.long 0xC 3. "CACHE_AWCACHE_EN,CACHE AWCACHE[1] override enable" "0,1" bitfld.long 0xC 2. "CACHE_ARCACHE_EN,CACHE ARCACHE[1] override enable" "0,1" bitfld.long 0xC 1. "WAKEUPMIX_AWCACHE_EN,WAKEUPMIX AWCACHE[1] override enable" "0,1" bitfld.long 0xC 0. "WAKEUPMIX_ARCACHE_EN,WAKEUPMIX ARCACHE[1] override enable" "0,1" group.long 0x24++0x5F line.long 0x0 "TIE_VALUE,GPR for uncertain tie0 or tie1" bitfld.long 0x0 29. "DFTRAMHOLD,DFTRAMHOLD tie" "0,1" hexmask.long.byte 0x0 25.--28. 1. "HPROT_GPV_CENTRAL,HPROT_GPC_CENTRAL tie" bitfld.long 0x0 22.--24. "AWSNOOP_S,AWNSOOP_S tie" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 18.--21. 1. "ARSNOOP_S,ARSNOOP_S tie" newline bitfld.long 0x0 15.--17. "AWUSER_S,AWUSER_S tie" "0,1,2,3,4,5,6,7" bitfld.long 0x0 12.--14. "ARUSER_S,ARUSER_S tie" "0,1,2,3,4,5,6,7" bitfld.long 0x0 10.--11. "AWBAR_S,AWBAR_S tie" "0,1,2,3" bitfld.long 0x0 8.--9. "ARBAR_S,ARBAR_S tie" "0,1,2,3" newline bitfld.long 0x0 7. "GICP_ALLOW_NS,GICP_ALLOW_NS tie" "0,1" bitfld.long 0x0 6. "GICT_ALLOW_NS,GICT_ALLOW_NS" "0,1" bitfld.long 0x0 4.--5. "XCPT_RTN,XCPT_RTN tie" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "AIPS4_HBSTRB,AIPS4_HBSTRB tie" line.long 0x4 "AXI_LIMIT_BEAT_LIMITER_0,AXI beat limiter 0 configuration" hexmask.long.word 0x4 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x4 0. "ENABLE,Beat limiter 0 enable" "0,1" line.long 0x8 "AXI_LIMIT_BEAT_LIMITER_1,AXI beat limiter 1 configuration" hexmask.long.word 0x8 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x8 0. "ENABLE,Beat limiter 1 enable" "0,1" line.long 0xC "AXI_LIMIT_BEAT_LIMITER_2,AXI beat limiter 2 configuration" hexmask.long.word 0xC 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0xC 0. "ENABLE,Beat limiter 2 enable" "0,1" line.long 0x10 "AXI_LIMIT_BEAT_LIMITER_3,AXI beat limiter 3 configuration" hexmask.long.word 0x10 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x10 0. "ENABLE,Beat limiter 3 enable" "0,1" line.long 0x14 "AXI_LIMIT_BEAT_LIMITER_4,AXI beat limiter 4 configuration" hexmask.long.word 0x14 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x14 0. "ENABLE,Beat limiter 4 enable" "0,1" line.long 0x18 "AXI_LIMIT_BEAT_LIMITER_5,AXI beat limiter 5 configuration" hexmask.long.word 0x18 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x18 0. "ENABLE,Beat limiter 5 enable" "0,1" line.long 0x1C "AXI_LIMIT_BEAT_LIMITER_6,AXI beat limiter 6 configuration" hexmask.long.word 0x1C 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x1C 0. "ENABLE,Beat limiter 6 enable" "0,1" line.long 0x20 "AXI_LIMIT_BEAT_LIMITER_7,AXI beat limiter 7 configuration" hexmask.long.word 0x20 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x20 0. "ENABLE,Beat limiter 7 enable" "0,1" line.long 0x24 "AXI_LIMIT_BEAT_LIMITER_8,AXI beat limiter 8 configuration" hexmask.long.word 0x24 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x24 0. "ENABLE,Beat limiter 8 enable" "0,1" line.long 0x28 "AXI_LIMIT_BEAT_LIMITER_9,AXI beat limiter 9 configuration" hexmask.long.word 0x28 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x28 0. "ENABLE,Beat limiter 9 enable" "0,1" line.long 0x2C "AXI_LIMIT_BEAT_LIMITER_10,AXI beat limiter 10 configuration" hexmask.long.word 0x2C 16.--31. 1. "BEAT_LIMIT,Burst beat limit" bitfld.long 0x2C 0. "ENABLE,Beat limiter 10 enable" "0,1" line.long 0x30 "WAKEUPMIX_PRESSURE_HURRY,WAKEUPMIX pressure/hurry value configuration" bitfld.long 0x30 3.--5. "PRESSURE,WAKUPMIX pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x30 0.--2. "HURRY,WAKEUPMIX hurry value" "0,1,2,3,4,5,6,7" line.long 0x34 "VPUMIX_PRESSURE_HURRY,VPUMIX pressure/hurry value configuration" bitfld.long 0x34 3.--5. "PRESSURE,VPUMIX pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x34 0.--2. "HURRY,VPUMIX pressure value" "0,1,2,3,4,5,6,7" line.long 0x38 "HSIOMIX_PRESSURE_HURRY,HSIOMUX pressure/hurry value configuration" bitfld.long 0x38 3.--5. "PRESSURE,HSIOMIX pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x38 0.--2. "HURRY,HSIOMIX hurry value" "0,1,2,3,4,5,6,7" line.long 0x3C "MMU700_PRESSURE_HURRY,MMU700 pressure/hurry value configuration" bitfld.long 0x3C 3.--5. "PRESSURE,MMU700 pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x3C 0.--2. "HURRY,MMU700 hurry value" "0,1,2,3,4,5,6,7" line.long 0x40 "NETCMIX_PRESSURE_HURRY,NETCMIX pressure/hurry value configuration" bitfld.long 0x40 3.--5. "PRESSURE,NETCMIX pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x40 0.--2. "HURRY,NETCMIX pressure value" "0,1,2,3,4,5,6,7" line.long 0x44 "DISPLAYMIX_RT_PRESSURE_HURRY,DISPLAYMIX_RT pressure/hurry value configuration" bitfld.long 0x44 3.--5. "PRESSURE,DISPLAYMIX_RT pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x44 0.--2. "HURRY,DISPLAYMIX_RT hurry value" "0,1,2,3,4,5,6,7" line.long 0x48 "GPUMIX_PRESSURE_HURRY,GPUMIX pressure/hurry value configuration" bitfld.long 0x48 3.--5. "PRESSURE,GPUMIX pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x48 0.--2. "HURRY,GPUMIX hurry value" "0,1,2,3,4,5,6,7" line.long 0x4C "NPUMIX_PRESSURE_HURRY,NPUMIX pressure/hurry value configuration" bitfld.long 0x4C 3.--5. "PRESSURE,NPUMIX pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x4C 0.--2. "HURRY,NPUMIX hurry value" "0,1,2,3,4,5,6,7" line.long 0x50 "GIC700_PRESSURE_HURRY,GIC700 pressure/hurry value configuration" bitfld.long 0x50 3.--5. "PRESSURE,GIC700 pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x50 0.--2. "HURRY,GIC700 hurry value" "0,1,2,3,4,5,6,7" line.long 0x54 "CORTEXAMIX_B_PRESSURE_HURRY,CORTEXAMIX B pressure/hurry value configuration" bitfld.long 0x54 3.--5. "PRESSURE,CORTEXAMIX B pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x54 0.--2. "HURRY,CORTEXAMIX B hurry value" "0,1,2,3,4,5,6,7" line.long 0x58 "CORTEXAMIX_A_PRESSURE_HURRY,CORTEXAMIX A pressure/hurry value configuration" bitfld.long 0x58 3.--5. "PRESSURE,CORTEXAMIX A pressure value" "0,1,2,3,4,5,6,7" bitfld.long 0x58 0.--2. "HURRY,CORTEXAMIX A hurry value" "0,1,2,3,4,5,6,7" line.long 0x5C "OCRAM_SGLECC_ERR_INT,OCRAM single ECC error interrupt flag" eventfld.long 0x5C 0. "SGL_ECC_ERR_IF,OCRAM single ECC error interrupt flag" "0,1" group.long 0x90++0x17 line.long 0x0 "VPU_TBU_IF,VPU TBU Interrupt Flag Register" eventfld.long 0x0 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x0 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x0 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x0 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" line.long 0x4 "DISPBE_TBU_IF,DISP-BE TBU Interrupt Flag Register" eventfld.long 0x4 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x4 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x4 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x4 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" line.long 0x8 "DISPRT_TBU_IF,DISP-RT TBU Interrupt Flag Register" eventfld.long 0x8 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x8 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x8 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x8 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" line.long 0xC "NETC_TBU_IF,NETC TBU Interrupt Flag Register" eventfld.long 0xC 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0xC 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0xC 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0xC 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" line.long 0x10 "CAMERA_TBU_IF,CAMERA TBU Interrupt Flag Register" eventfld.long 0x10 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x10 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x10 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x10 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" line.long 0x14 "GPU_TBU_IF,GPU TBU Interrupt Flag Register" eventfld.long 0x14 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x14 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x14 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x14 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" group.long 0xAC++0x7 line.long 0x0 "NPU_TBU_IF,NPU TBU Interrupt Flag Register" eventfld.long 0x0 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x0 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x0 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x0 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" line.long 0x4 "HSIO_TBU_IF,HSIO TBU Interrupt Flag Register" eventfld.long 0x4 3. "PMU_IRPT,TBU PMU Interrupt" "0,1" eventfld.long 0x4 2. "RAS_CRI,TBU Critical Error Interrupt" "0,1" eventfld.long 0x4 1. "RAS_ERI,TBU Error Recovery RAS Interrupt" "0,1" eventfld.long 0x4 0. "RAS_FHI,TBU Fault Handling RAS Interrupt" "0,1" tree.end tree "NOC_CMU" tree "CMU_N0" base ad:0x49070000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree "CMU_N1" base ad:0x49080000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree.end tree "NOC_EIM" base ad:0x49210000 group.long 0x0++0x7 line.long 0x0 "EIMCR,Error Injection Module Configuration Register" bitfld.long 0x0 0. "GEIEN,Global Error Injection Enable" "0: Disabled,1: Enabled" line.long 0x4 "EICHEN,Error Injection Channel Enable register" bitfld.long 0x4 31. "EICH0EN,Error Injection Channel 0 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." group.long 0x100++0x7 line.long 0x0 "EICHD0_WORD0,Error Injection Channel Descriptor 0. Word0" bitfld.long 0x0 31. "CHKBIT_MASK,Checkbit Mask" "0,1" line.long 0x4 "EICHD0_WORD1,Error Injection Channel Descriptor 0. Word1" hexmask.long.byte 0x4 0.--7. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" tree.end tree "NOC_ISI_MAIN_PROBE" base ad:0x4AFF0000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4AFF0204 ad:0x4AFF0214 ad:0x4AFF0224 ad:0x4AFF0234 ad:0x4AFF0244 ad:0x4AFF0254 ad:0x4AFF0264 ad:0x4AFF0274 ad:0x4AFF0284 ad:0x4AFF0294) tree "Counters[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "Counters__Src,Counters n Source" bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0x8)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_ISI_RD_I_QOSGENERATOR" base ad:0x4AFF0D00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "ISI_RD_I_main_QosGenerator_Priority,Priority register." bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "ISI_RD_I_main_QosGenerator_Bandwidth,Register Bandwidth" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "ISI_RD_I_main_QosGenerator_Saturation,Register Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ISI_RD_I_main_QosGenerator_ExtControl,External inputs control." bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_ISI_RD_I_XSTATFILTER" base ad:0x4AFF0D80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISI_WR_U_I_XSTATFILTER" base ad:0x4AFF0E00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISI_WR_V_I_XSTATFILTER" base ad:0x4AFF0E80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISI_WR_Y_I_XSTATFILTER" base ad:0x4AFF0F00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISP_MAIN_PROBE" base ad:0x4AFF0400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4AFF0604 ad:0x4AFF0614 ad:0x4AFF0624 ad:0x4AFF0634 ad:0x4AFF0644 ad:0x4AFF0654 ad:0x4AFF0664 ad:0x4AFF0674 ad:0x4AFF0684 ad:0x4AFF0694) tree "Counters[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "Counters__Src,Counters n Source" bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0x8)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_ISP_RD_0_I_XSTATFILTER" base ad:0x4AFF0F80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISP_RD_1_I_XSTATFILTER" base ad:0x4AFF1000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISP_WR_0_I_XSTATFILTER" base ad:0x4AFF1080 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_ISP_WR_1_I_XSTATFILTER" base ad:0x4AFF1100 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.word 0x8 0.--11. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0xB line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long.tbyte 0x4 0.--23. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long.tbyte 0x8 0.--23. 1. "USERMASK,This register contains the User mask used to filter requests." tree.end tree "NOC_JPEG_DEC_MAIN_PROBE" base ad:0x4C801000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4C801204 ad:0x4C801214 ad:0x4C801224 ad:0x4C801234 ad:0x4C801244 ad:0x4C801254 ad:0x4C801264 ad:0x4C801274 ad:0x4C801284 ad:0x4C801294) tree "Counters[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "Counters__Src,Counters n Source" bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0x8)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_JPEG_DEC_PROBE_TRANSTATPROFILER" base ad:0x4C801500 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "EN,Enable" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Register Mode sets the counting mode per observed port" "0,1,2,3" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "TransactionStatProfiler_ObservedSel_[$1],ObservedSel n" bitfld.long 0x0 0. "OBSERVEDSEL,Register ObservedSel_i selects the port to be observed: 0." "0,1" repeat.end group.long 0x20++0x3 line.long 0x0 "NTenureLines_0,Number of Transaction Probe Lines" bitfld.long 0x0 0.--1. "NTENURELINES_0,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 0" "0,1,2,3" repeat 2. (list 0x0 0x1)(list ad:0x4C80152C ad:0x4C80153C) tree "Thresholds[$1]" base $2 repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2)++0x3 line.long 0x0 "TransactionStatProfiler_Thresholds__[$1],Transaction Profiler Thresholds Register" hexmask.long.word 0x0 0.--9. 1. "THRESHOLDS,Thresholds 0 0" repeat.end tree.end repeat.end base ad:0x4C801500 rgroup.long 0x6C++0x3 line.long 0x0 "OverflowStatus,Overflow Status" bitfld.long 0x0 0.--1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" "0,1,2,3" wgroup.long 0x70++0x3 line.long 0x0 "OverflowReset,Overflow Reset" eventfld.long 0x0 0.--1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" "0,1,2,3" group.long 0x74++0x7 line.long 0x0 "PendingEventMode,Pending Event Mode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "PreScaler,Pre Scaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree "NOC_JPEG_DEC_RD_I_TRANSTATFILTER" base ad:0x4C801400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." group.long 0x14++0x3 line.long 0x0 "AddrWindowSize,Address Window Size" hexmask.long.byte 0x0 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_JPEG_DEC_WR_I_TRANSTATFILTER" base ad:0x4C801480 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." group.long 0x14++0x3 line.long 0x0 "AddrWindowSize,Address Window Size" hexmask.long.byte 0x0 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_JPEG_DEC_WR_QOSGENERATOR" base ad:0x4C801400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_JPEG_ENC_PROBE_MAIN_PROBE" base ad:0x4C802000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4C802204 ad:0x4C802214 ad:0x4C802224 ad:0x4C802234 ad:0x4C802244 ad:0x4C802254 ad:0x4C802264 ad:0x4C802274 ad:0x4C802284 ad:0x4C802294) tree "Counters[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "Counters__Src,Counters n Source" bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0x8)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_JPEG_ENC_PROBE_TRANSTATPROFILER" base ad:0x4C802500 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "EN,Enable" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Register Mode sets the counting mode per observed port" "0,1,2,3" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "TransactionStatProfiler_ObservedSel_[$1],ObservedSel n" bitfld.long 0x0 0. "OBSERVEDSEL,Register ObservedSel_i selects the port to be observed: 0." "0,1" repeat.end group.long 0x20++0x3 line.long 0x0 "NTenureLines_0,Number of Transaction Probe Lines" bitfld.long 0x0 0.--2. "NTENURELINES_0,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 0" "0,1,2,3,4,5,6,7" repeat 2. (list 0x0 0x1)(list ad:0x4C80252C ad:0x4C80253C) tree "Thresholds[$1]" base $2 repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2)++0x3 line.long 0x0 "TransactionStatProfiler_Thresholds__[$1],Transaction Profiler Thresholds Register" hexmask.long.word 0x0 0.--9. 1. "THRESHOLDS,Thresholds 0 0" repeat.end tree.end repeat.end base ad:0x4C802500 rgroup.long 0x6C++0x3 line.long 0x0 "OverflowStatus,Overflow Status" bitfld.long 0x0 0.--1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" "0,1,2,3" wgroup.long 0x70++0x3 line.long 0x0 "OverflowReset,Overflow Reset" eventfld.long 0x0 0.--1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" "0,1,2,3" group.long 0x74++0x7 line.long 0x0 "PendingEventMode,Pending Event Mode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "PreScaler,Pre Scaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree "NOC_JPEG_ENC_RD_I_TRANSTATFILTER" base ad:0x4C802400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." group.long 0x14++0x3 line.long 0x0 "AddrWindowSize,Address Window Size" hexmask.long.byte 0x0 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_JPEG_ENC_RD_QOSGENERATOR" base ad:0x4C802400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_JPEG_ENC_WR_I_TRANSTATFILTER" base ad:0x4C802480 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." group.long 0x14++0x3 line.long 0x0 "AddrWindowSize,Address Window Size" hexmask.long.byte 0x0 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_LSTCU" base ad:0x490B0000 group.long 0x8++0x3 line.long 0x0 "ERR_STAT,Error Status" bitfld.long 0x0 17. "RFSF,Recoverable Fault Status" "0: No recoverable fault,1: Recoverable fault has occurred" bitfld.long 0x0 16. "UFSF,Unrecoverable Fault Status" "0: No unrecoverable fault,1: Unrecoverable fault has occurred" newline rbitfld.long 0x0 1. "INVP_MB,Invalid Pointer MBIST" "0: No invalid pointer to BIST controller.,1: Invalid BIST pointer specified during BIST.." group.long 0x10++0x3 line.long 0x0 "ERR_FM,Error Fault Mapping" bitfld.long 0x0 1. "INVPFMMB,Invalid BIST Pointer Fault Mapping during MBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" rgroup.long 0x60++0x3 line.long 0x0 "MB_RSTAT0,MBIST Run Status 0" bitfld.long 0x0 0. "MBSTAT0,MBIST Run Result Status Bit 0" "0: Pass,1: Fail" group.long 0x180++0x3 line.long 0x0 "MBFM0,MBIST Fault Mapping 0" bitfld.long 0x0 0. "MBSTATFM0,MBIST_RUN_STAT0[MBSTAT0] Fault Mapping" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" group.long 0x260++0x3 line.long 0x0 "STAG,Stagger" hexmask.long.byte 0x0 8.--15. 1. "MB_DELAY,MBIST Delay" group.long 0x270++0xB line.long 0x0 "PH1_DUR,Phase 1 Duration" hexmask.long.word 0x0 0.--9. 1. "PH1DUR,Phase 1 Duration" line.long 0x4 "ISODUR,Isolation Duration" hexmask.long.word 0x4 16.--25. 1. "DIS_DUR,Disable Duration" hexmask.long.word 0x4 0.--9. 1. "EN_DUR,Enable Duration" line.long 0x8 "SRCENDUR,Synchronous Reset Clock Enable Duration" hexmask.long.word 0x8 0.--9. 1. "CLKENDUR,Synchronous Reset Clock Enable Duration (in LSTCU clock cycles)" group.long 0x300++0x3 line.long 0x0 "MBPTR0,MBIST Scheduler Pointer" bitfld.long 0x0 31. "MBEOL,MBIST End of List" "0: Not end of list,1: End of list" bitfld.long 0x0 8. "MBCSM,MBIST Concurrent or Sequential Mode" "0: Sequential mode,1: Concurrent mode" newline hexmask.long.byte 0x0 0.--7. 1. "MBPTR,MBIST Pointer" tree.end tree "NOC_M_A_2A_AON_I_GENERICTOTRANSPORT" base ad:0x43900000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x3 line.long 0x0 "NbPktMax0,Nb Max Packet 0" hexmask.long.byte 0x0 0.--7. 1. "NBPKTMAX0,Max transport pkt pending for shapingId 0" tree.end tree "NOC_M_E_0_RD_I_QOSGENERATOR" base ad:0x921C0080 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_0_WR_I_QOSGENERATOR" base ad:0x921C0100 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_1A_RD_I_QOSGENERATOR" base ad:0x921C0180 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_1A_WR_I_QOSGENERATOR" base ad:0x921C0200 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_1B_RD_I_QOSGENERATOR" base ad:0x921C0280 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_1B_WR_I_QOSGENERATOR" base ad:0x921C0300 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_2_RD_I_QOSGENERATOR" base ad:0x921C0380 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_2_WR_I_QOSGENERATOR" base ad:0x921C0400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_3_RD_I_QOSGENERATOR" base ad:0x921C0480 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_3_WR_I_QOSGENERATOR" base ad:0x921C0500 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_4_RD_I_QOSGENERATOR" base ad:0x921C0680 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_4_WR_I_QOSGENERATOR" base ad:0x921C0700 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_5_RD_I_QOSGENERATOR" base ad:0x921C0880 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_5_WR_I_QOSGENERATOR" base ad:0x921C0900 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_6_RD_I_QOSGENERATOR" base ad:0x921C0A80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_7_RD_I_QOSGENERATOR" base ad:0x921C0C80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_7_WR_I_QOSGENERATOR" base ad:0x921C0D00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_8_RD_I_QOSGENERATOR" base ad:0x921C0E80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_M_E_8_WR_I_QOSGENERATOR" base ad:0x921C0F00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority Register" bitfld.long 0x0 8.--10. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3,4,5,6,7" line.long 0x4 "Mode,Mode Register" bitfld.long 0x4 0.--1. "MODE,Functional Mode" "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth Register" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation Register" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_OBSERVER_ERRORLOGGER_0" base ad:0x921C0000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x3 line.long 0x0 "FaultEn,Fault Enable" bitfld.long 0x0 0. "FAULTEN,Set to 1 to enable output signal Fault. Fault asserted when ErrVld is 1." "0,1" rgroup.long 0xC++0x3 line.long 0x0 "ErrVld,ErrVld Register" bitfld.long 0x0 0. "ERRVLD,1 indicates an error has been logged" "0,1" wgroup.long 0x10++0x3 line.long 0x0 "ErrClr,ErrClr Register" eventfld.long 0x0 0. "ERRCLR,Set to 1 to clear ErrVld. NOTE The written value is not stored in ErrVld. A read always returns 0." "0,1" rgroup.long 0x14++0x7 line.long 0x0 "ErrLog0,Error Logger 0" bitfld.long 0x0 31. "FORMAT,NTTP transport protocol version" "0,1" hexmask.long.word 0x0 16.--27. 1. "LEN1,Len1" bitfld.long 0x0 8.--10. "ERRCODE,ErrCode" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 1.--4. 1. "OPC,Opc" bitfld.long 0x0 0. "LOCK,Lock" "0,1" line.long 0x4 "ErrLog1,Error Logger 1" hexmask.long.tbyte 0x4 0.--19. 1. "ERRLOG1,Stores NTTP packet header field RouteId (LSBs) of the logged error" rgroup.long 0x20++0xB line.long 0x0 "ErrLog3,Error Logger 3" hexmask.long 0x0 0.--31. 1. "ERRLOG3,Stores NTTP packet header field Addr (LSBs) of the logged error" line.long 0x4 "ErrLog4,Error Logger 4" hexmask.long.byte 0x4 0.--3. 1. "ERRLOG4,Stores NTTP packet header field Addr (MSBs) of the logged error" line.long 0x8 "ErrLog5,Error Logger 5" hexmask.long.tbyte 0x8 0.--22. 1. "ERRLOG5,Stores NTTP packet header field User (LSBs) of the logged error" group.long 0x4C++0x3 line.long 0x0 "StallEn,Stall Enable" bitfld.long 0x0 0. "STALLEN,Set to 1 to enable stall mode behavior." "0,1" tree.end tree "NOC_OBSERVER_ERRORLOGGER_1" base ad:0x4AFF0C80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x3 line.long 0x0 "observer_main_ErrorLogger_1_FaultEn,Register FaultEn" bitfld.long 0x0 0. "FAULTEN,Set to 1 to enable output signal Fault. Fault asserted when ErrVld is 1." "0,1" rgroup.long 0xC++0x3 line.long 0x0 "observer_main_ErrorLogger_1_ErrVld,Register ErrVld" bitfld.long 0x0 0. "ERRVLD,1 indicates an error has been logged" "0,1" wgroup.long 0x10++0x3 line.long 0x0 "observer_main_ErrorLogger_1_ErrClr,Register ErrClr" eventfld.long 0x0 0. "ERRCLR,Set to 1 to clear ErrVld. NOTE The written value is not stored in ErrVld. A read always returns 0." "0,1" rgroup.long 0x14++0x7 line.long 0x0 "observer_main_ErrorLogger_1_ErrLog0,Stores NTTP packet header fields Lock. Opc. ErrCode. Len1 and indicates version of NTTP transport protocol" bitfld.long 0x0 31. "FORMAT,NTTP transport protocol version" "0,1" hexmask.long.byte 0x0 16.--23. 1. "LEN1,Len1" bitfld.long 0x0 8.--10. "ERRCODE,ErrCode" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 1.--4. 1. "OPC,Opc" bitfld.long 0x0 0. "LOCK,Lock" "0,1" line.long 0x4 "observer_main_ErrorLogger_1_ErrLog1,Register ErrLog1" hexmask.long 0x4 0.--24. 1. "ERRLOG1,Stores NTTP packet header field RouteId (LSBs) of the logged error" rgroup.long 0x20++0xB line.long 0x0 "observer_main_ErrorLogger_1_ErrLog3,Register ErrLog3" hexmask.long 0x0 0.--31. 1. "ERRLOG3,Stores NTTP packet header field Addr (LSBs) of the logged error" line.long 0x4 "observer_main_ErrorLogger_1_ErrLog4,Register ErrLog4" hexmask.long.word 0x4 0.--12. 1. "ERRLOG4,Stores NTTP packet header field Addr (MSBs) of the logged error" line.long 0x8 "observer_main_ErrorLogger_1_ErrLog5,Register ErrLog5" hexmask.long.tbyte 0x8 0.--23. 1. "ERRLOG5,Stores NTTP packet header field User (LSBs) of the logged error" group.long 0x4C++0x3 line.long 0x0 "observer_main_ErrorLogger_1_StallEn,Register StallEn" bitfld.long 0x0 0. "STALLEN,Set to 1 to enable stall mode behavior." "0,1" tree.end tree "NOC_PCIE" tree "NOC_PCIE1_AXI_SLAVE_RD_I_XSTATFILTER" base ad:0x980C0480 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "PCIE1_AXI_Slave_rd_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "PCIE1_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "PCIE1_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "PCIE1_AXI_Slave_rd_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "PCIE1_AXI_Slave_rd_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree "NOC_PCIE1_AXI_SLAVE_WR_I_XSTATFILTER" base ad:0x980C0400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "PCIE1_AXI_Slave_wr_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "PCIE1_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "PCIE1_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "PCIE1_AXI_Slave_wr_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "PCIE1_AXI_Slave_wr_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree "NOC_PCIE2_AXI_SLAVE_RD_I_XSTATFILTER" base ad:0x980C0380 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "PCIE2_AXI_Slave_rd_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "PCIE2_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "PCIE2_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "PCIE2_AXI_Slave_rd_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "PCIE2_AXI_Slave_rd_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree "NOC_PCIE2_AXI_SLAVE_WR_I_XSTATFILTER" base ad:0x980C0300 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "PCIE2_AXI_Slave_wr_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "PCIE2_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "PCIE2_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "PCIE2_AXI_Slave_wr_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "PCIE2_AXI_Slave_wr_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree.end tree "NOC_POWER_MAIN_RESFAULTCONTROLLER" base ad:0x42830080 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code" hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x8)++0x3 line.long 0x0 "MissionFault[$1],Mission Fault n" hexmask.long 0x0 0.--31. 1. "MISSIONFAULT,Mission Fault 0" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x18)++0x3 line.long 0x0 "LatentFault[$1],Latent Fault n" hexmask.long 0x0 0.--31. 1. "LATENTFAULT,Latent Fault 0" repeat.end rgroup.long 0x28++0x3 line.long 0x0 "Faults,Interrupt Enable" bitfld.long 0x0 1. "MISSIONFAULT,Mission Fault" "0,1" bitfld.long 0x0 0. "LATENTFAULT,Latent Fault" "0,1" group.long 0x2C++0x3 line.long 0x0 "IntEn,Interrupt Enable" bitfld.long 0x0 1. "MISSIONFAULTEN,MissionFault Interrupt enable" "0,1" bitfld.long 0x0 0. "BISTDONEEN,BistDone Interrupt enable" "0,1" wgroup.long 0x30++0x7 line.long 0x0 "IntClr,InterruptClear" eventfld.long 0x0 1. "MISSIONFAULTCLR,Clear Mission Fault" "0,1" eventfld.long 0x0 0. "LATENTFAULTCLR,Clear Latent Fault" "0,1" line.long 0x4 "BistCtl,BistControl" eventfld.long 0x4 1. "BISTDONECLR,Clear BistDone" "0,1" eventfld.long 0x4 0. "BISTSTART,Start Bist sequence" "0,1" rgroup.long 0x38++0x3 line.long 0x0 "BistDone,BistDone" bitfld.long 0x0 1. "MISSIONMODE,Mission Mode Status" "0,1" bitfld.long 0x0 0. "BISTDONE,BistDone Status" "0,1" group.long 0x3C++0x7 line.long 0x0 "BistTO1,Bist T01" hexmask.long.word 0x0 0.--15. 1. "BISTTO1,BistTimeOut register" line.long 0x4 "BistTO2,Bist T02" hexmask.long.byte 0x4 0.--7. 1. "BISTTO2,BistTimeOut register" tree.end tree "NOC_POWER_RESILIENCEFAULTCONTROLLER" base ad:0x43900080 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x8)++0x3 line.long 0x0 "MissionFault[$1],Mission Fault n" hexmask.long 0x0 0.--31. 1. "MISSIONFAULT,Mission Fault 0" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x18)++0x3 line.long 0x0 "LatentFault[$1],Latent Fault n" hexmask.long 0x0 0.--31. 1. "LATENTFAULT,Latent Fault 0" repeat.end rgroup.long 0x28++0x3 line.long 0x0 "Faults,Faults" bitfld.long 0x0 1. "MISSIONFAULT,Mission Fault" "0,1" bitfld.long 0x0 0. "LATENTFAULT,Latent Fault" "0,1" group.long 0x2C++0x3 line.long 0x0 "IntEn,Interrupt Enable" bitfld.long 0x0 1. "MISSIONFAULTEN,MissionFault Interrupt enable" "0,1" bitfld.long 0x0 0. "BISTDONEEN,BistDone Interrupt enable" "0,1" wgroup.long 0x30++0x7 line.long 0x0 "IntClr,InterruptClear" eventfld.long 0x0 1. "MISSIONFAULTCLR,Clear Mission Fault" "0,1" eventfld.long 0x0 0. "LATENTFAULTCLR,Clear Latent Fault" "0,1" line.long 0x4 "BistCtl,BistControl" eventfld.long 0x4 1. "BISTDONECLR,Clear BistDone" "0,1" eventfld.long 0x4 0. "BISTSTART,Start Bist sequence" "0,1" rgroup.long 0x38++0x3 line.long 0x0 "BistDone,BistDone" bitfld.long 0x0 1. "MISSIONMODE,Mission Mode Status" "0,1" bitfld.long 0x0 0. "BISTDONE,BistDone Status" "0,1" group.long 0x3C++0x7 line.long 0x0 "BistTO1,Bist T01" hexmask.long.word 0x0 0.--15. 1. "BISTTO1,BistTimeOut register" line.long 0x4 "BistTO2,Bist T02" hexmask.long.byte 0x4 0.--7. 1. "BISTTO2,BistTimeOut register" tree.end tree "NOC_PROBE" tree "NOC_PROBE1_MAIN_PROBE" base ad:0x4B7E0000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4B7E0204 ad:0x4B7E0214 ad:0x4B7E0224 ad:0x4B7E0234 ad:0x4B7E0244 ad:0x4B7E0254 ad:0x4B7E0264 ad:0x4B7E0274 ad:0x4B7E0284 ad:0x4B7E0294) tree "Counters[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "Counters__Src,Counters n Source" bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0x8)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_PROBE1_MAIN_XSTATPROFILER" base ad:0x4B7E1180 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "EN,Enable" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Mode,Mode" hexmask.long.byte 0x4 0.--3. 1. "MODE,Register Mode sets the counting mode per observed port" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "TransactionStatProfiler_ObservedSel_[$1],ObservedSel n" hexmask.long.byte 0x0 0.--3. 1. "OBSERVEDSEL,Register ObservedSel_i selects the port to be observed: 0." repeat.end repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x20)++0x3 line.long 0x0 "NTenureLines_[$1],NTenureLines n" hexmask.long.byte 0x0 0.--5. 1. "NTENURELINES_n,NTenureLines_0" repeat.end repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x4B7E11AC ad:0x4B7E11BC ad:0x4B7E11CC ad:0x4B7E11DC) tree "Thresholds[$1]" base $2 repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2)++0x3 line.long 0x0 "TransactionStatProfiler_Thresholds__[$1],Transaction Profiler Thresholds" hexmask.long.word 0x0 0.--9. 1. "THRESHOLDS,Thresholds 0 0" repeat.end tree.end repeat.end base ad:0x4B7E1180 rgroup.long 0x6C++0x3 line.long 0x0 "OverflowStatus,Overflow Status" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" wgroup.long 0x70++0x3 line.long 0x0 "OverflowReset,Overflow Reset" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" group.long 0x74++0x7 line.long 0x0 "PendingEventMode,Pending Event Mode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "PreScaler,Pre Scaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree "NOC_PROBE_ISI_XSTATPROFILER" base ad:0x4AFF1180 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x63 line.long 0x0 "EN,Enable" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Mode,Mode" hexmask.long.byte 0x4 0.--3. 1. "MODE,Register Mode sets the counting mode per observed port" line.long 0x8 "Probe_ISI_main_TransactionStatProfiler_ObservedSel_0,Register ObservedSel_0" bitfld.long 0x8 0.--1. "OBSERVEDSEL_0,Register ObservedSel_i selects the port to be observed: 0." "0,1,2,3" line.long 0xC "Probe_ISI_main_TransactionStatProfiler_ObservedSel_1,Register ObservedSel_1" bitfld.long 0xC 0.--1. "OBSERVEDSEL_1,Register ObservedSel_i selects the port to be observed: 1." "0,1,2,3" line.long 0x10 "Probe_ISI_main_TransactionStatProfiler_ObservedSel_2,Register ObservedSel_2" bitfld.long 0x10 0.--1. "OBSERVEDSEL_2,Register ObservedSel_i selects the port to be observed: 2." "0,1,2,3" line.long 0x14 "Probe_ISI_main_TransactionStatProfiler_ObservedSel_3,Register ObservedSel_3" bitfld.long 0x14 0.--1. "OBSERVEDSEL_3,Register ObservedSel_i selects the port to be observed: 3." "0,1,2,3" line.long 0x18 "NTenureLines_0,Number of Transaction Probe Lines" hexmask.long.byte 0x18 0.--3. 1. "NTENURELINES_0,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 0" line.long 0x1C "Probe_ISI_main_TransactionStatProfiler_NTenureLines_1,Register NTenureLines_1" hexmask.long.byte 0x1C 0.--3. 1. "NTENURELINES_1,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 1" line.long 0x20 "Probe_ISI_main_TransactionStatProfiler_NTenureLines_2,Register NTenureLines_2" hexmask.long.byte 0x20 0.--3. 1. "NTENURELINES_2,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 2" line.long 0x24 "Probe_ISI_main_TransactionStatProfiler_Thresholds_0_0,Register Thresholds_0_0" hexmask.long.word 0x24 0.--9. 1. "THRESHOLDS_0_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x28 "Probe_ISI_main_TransactionStatProfiler_Thresholds_0_1,Register Thresholds_0_1" hexmask.long.word 0x28 0.--9. 1. "THRESHOLDS_0_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x2C "Probe_ISI_main_TransactionStatProfiler_Thresholds_0_2,Register Thresholds_0_2" hexmask.long.word 0x2C 0.--9. 1. "THRESHOLDS_0_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x30 "Probe_ISI_main_TransactionStatProfiler_Thresholds_0_3,Register Thresholds_0_3" hexmask.long.word 0x30 0.--9. 1. "THRESHOLDS_0_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" line.long 0x34 "Probe_ISI_main_TransactionStatProfiler_Thresholds_1_0,Register Thresholds_1_0" hexmask.long.word 0x34 0.--9. 1. "THRESHOLDS_1_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x38 "Probe_ISI_main_TransactionStatProfiler_Thresholds_1_1,Register Thresholds_1_1" hexmask.long.word 0x38 0.--9. 1. "THRESHOLDS_1_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x3C "Probe_ISI_main_TransactionStatProfiler_Thresholds_1_2,Register Thresholds_1_2" hexmask.long.word 0x3C 0.--9. 1. "THRESHOLDS_1_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x40 "Probe_ISI_main_TransactionStatProfiler_Thresholds_1_3,Register Thresholds_1_3" hexmask.long.word 0x40 0.--9. 1. "THRESHOLDS_1_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" line.long 0x44 "Probe_ISI_main_TransactionStatProfiler_Thresholds_2_0,Register Thresholds_2_0" hexmask.long.word 0x44 0.--9. 1. "THRESHOLDS_2_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x48 "Probe_ISI_main_TransactionStatProfiler_Thresholds_2_1,Register Thresholds_2_1" hexmask.long.word 0x48 0.--9. 1. "THRESHOLDS_2_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x4C "Probe_ISI_main_TransactionStatProfiler_Thresholds_2_2,Register Thresholds_2_2" hexmask.long.word 0x4C 0.--9. 1. "THRESHOLDS_2_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x50 "Probe_ISI_main_TransactionStatProfiler_Thresholds_2_3,Register Thresholds_2_3" hexmask.long.word 0x50 0.--9. 1. "THRESHOLDS_2_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" line.long 0x54 "Probe_ISI_main_TransactionStatProfiler_Thresholds_3_0,Register Thresholds_3_0" hexmask.long.word 0x54 0.--9. 1. "THRESHOLDS_3_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x58 "Probe_ISI_main_TransactionStatProfiler_Thresholds_3_1,Register Thresholds_3_1" hexmask.long.word 0x58 0.--9. 1. "THRESHOLDS_3_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x5C "Probe_ISI_main_TransactionStatProfiler_Thresholds_3_2,Register Thresholds_3_2" hexmask.long.word 0x5C 0.--9. 1. "THRESHOLDS_3_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x60 "Probe_ISI_main_TransactionStatProfiler_Thresholds_3_3,Register Thresholds_3_3" hexmask.long.word 0x60 0.--9. 1. "THRESHOLDS_3_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" rgroup.long 0x6C++0x3 line.long 0x0 "Probe_ISI_main_TransactionStatProfiler_OverflowStatus,Register OverflowStatus" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" wgroup.long 0x70++0x3 line.long 0x0 "Probe_ISI_main_TransactionStatProfiler_OverflowReset,Register OverflowReset" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" group.long 0x74++0x7 line.long 0x0 "Probe_ISI_main_TransactionStatProfiler_PendingEventMode,Register PendingEventMode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "Probe_ISI_main_TransactionStatProfiler_PreScaler,Register PreScaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree "NOC_PROBE_ISP_XSTATPROFILER" base ad:0x4AFF1200 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x63 line.long 0x0 "EN,Enable" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Mode,Mode" hexmask.long.byte 0x4 0.--3. 1. "MODE,Register Mode sets the counting mode per observed port" line.long 0x8 "Probe_ISP_main_TransactionStatProfiler_ObservedSel_0,Register ObservedSel_0" bitfld.long 0x8 0.--1. "OBSERVEDSEL_0,Register ObservedSel_i selects the port to be observed: 0." "0,1,2,3" line.long 0xC "Probe_ISP_main_TransactionStatProfiler_ObservedSel_1,Register ObservedSel_1" bitfld.long 0xC 0.--1. "OBSERVEDSEL_1,Register ObservedSel_i selects the port to be observed: 1." "0,1,2,3" line.long 0x10 "Probe_ISP_main_TransactionStatProfiler_ObservedSel_2,Register ObservedSel_2" bitfld.long 0x10 0.--1. "OBSERVEDSEL_2,Register ObservedSel_i selects the port to be observed: 2." "0,1,2,3" line.long 0x14 "Probe_ISP_main_TransactionStatProfiler_ObservedSel_3,Register ObservedSel_3" bitfld.long 0x14 0.--1. "OBSERVEDSEL_3,Register ObservedSel_i selects the port to be observed: 3." "0,1,2,3" line.long 0x18 "NTenureLines_0,Number of Transaction Probe Lines" hexmask.long.byte 0x18 0.--3. 1. "NTENURELINES_0,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 0" line.long 0x1C "Probe_ISP_main_TransactionStatProfiler_NTenureLines_1,Register NTenureLines_1" hexmask.long.byte 0x1C 0.--3. 1. "NTENURELINES_1,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 1" line.long 0x20 "Probe_ISP_main_TransactionStatProfiler_NTenureLines_2,Register NTenureLines_2" hexmask.long.byte 0x20 0.--3. 1. "NTENURELINES_2,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 2" line.long 0x24 "Probe_ISP_main_TransactionStatProfiler_Thresholds_0_0,Register Thresholds_0_0" hexmask.long.word 0x24 0.--9. 1. "THRESHOLDS_0_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x28 "Probe_ISP_main_TransactionStatProfiler_Thresholds_0_1,Register Thresholds_0_1" hexmask.long.word 0x28 0.--9. 1. "THRESHOLDS_0_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x2C "Probe_ISP_main_TransactionStatProfiler_Thresholds_0_2,Register Thresholds_0_2" hexmask.long.word 0x2C 0.--9. 1. "THRESHOLDS_0_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x30 "Probe_ISP_main_TransactionStatProfiler_Thresholds_0_3,Register Thresholds_0_3" hexmask.long.word 0x30 0.--9. 1. "THRESHOLDS_0_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" line.long 0x34 "Probe_ISP_main_TransactionStatProfiler_Thresholds_1_0,Register Thresholds_1_0" hexmask.long.word 0x34 0.--9. 1. "THRESHOLDS_1_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x38 "Probe_ISP_main_TransactionStatProfiler_Thresholds_1_1,Register Thresholds_1_1" hexmask.long.word 0x38 0.--9. 1. "THRESHOLDS_1_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x3C "Probe_ISP_main_TransactionStatProfiler_Thresholds_1_2,Register Thresholds_1_2" hexmask.long.word 0x3C 0.--9. 1. "THRESHOLDS_1_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x40 "Probe_ISP_main_TransactionStatProfiler_Thresholds_1_3,Register Thresholds_1_3" hexmask.long.word 0x40 0.--9. 1. "THRESHOLDS_1_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" line.long 0x44 "Probe_ISP_main_TransactionStatProfiler_Thresholds_2_0,Register Thresholds_2_0" hexmask.long.word 0x44 0.--9. 1. "THRESHOLDS_2_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x48 "Probe_ISP_main_TransactionStatProfiler_Thresholds_2_1,Register Thresholds_2_1" hexmask.long.word 0x48 0.--9. 1. "THRESHOLDS_2_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x4C "Probe_ISP_main_TransactionStatProfiler_Thresholds_2_2,Register Thresholds_2_2" hexmask.long.word 0x4C 0.--9. 1. "THRESHOLDS_2_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x50 "Probe_ISP_main_TransactionStatProfiler_Thresholds_2_3,Register Thresholds_2_3" hexmask.long.word 0x50 0.--9. 1. "THRESHOLDS_2_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" line.long 0x54 "Probe_ISP_main_TransactionStatProfiler_Thresholds_3_0,Register Thresholds_3_0" hexmask.long.word 0x54 0.--9. 1. "THRESHOLDS_3_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" line.long 0x58 "Probe_ISP_main_TransactionStatProfiler_Thresholds_3_1,Register Thresholds_3_1" hexmask.long.word 0x58 0.--9. 1. "THRESHOLDS_3_1,Register Thresholds_i_j contains the threshold index '1' that allows computation of threshold values" line.long 0x5C "Probe_ISP_main_TransactionStatProfiler_Thresholds_3_2,Register Thresholds_3_2" hexmask.long.word 0x5C 0.--9. 1. "THRESHOLDS_3_2,Register Thresholds_i_j contains the threshold index '2' that allows computation of threshold values" line.long 0x60 "Probe_ISP_main_TransactionStatProfiler_Thresholds_3_3,Register Thresholds_3_3" hexmask.long.word 0x60 0.--9. 1. "THRESHOLDS_3_3,Register Thresholds_i_j contains the threshold index '3' that allows computation of threshold values" rgroup.long 0x6C++0x3 line.long 0x0 "Probe_ISP_main_TransactionStatProfiler_OverflowStatus,Register OverflowStatus" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" wgroup.long 0x70++0x3 line.long 0x0 "Probe_ISP_main_TransactionStatProfiler_OverflowReset,Register OverflowReset" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" group.long 0x74++0x7 line.long 0x0 "Probe_ISP_main_TransactionStatProfiler_PendingEventMode,Register PendingEventMode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "Probe_ISP_main_TransactionStatProfiler_PreScaler,Register PreScaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree "NOC_PROBE_MAIN_PROBE" base ad:0x967E0000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" line.long 0x8 "TracePortSel,Trace Port Select" bitfld.long 0x8 0. "TRACEPORTSEL,Register TracePortSel indicates which generic protocol link is currently being observed by trace logic" "0,1" line.long 0xC "FilterLut,Filter Lookup Table" hexmask.long.byte 0xC 0.--3. 1. "FILTERLUT,Register FilterLut contains a look-up table that is used to combine filter outputs in order to trace packets" line.long 0x10 "TraceAlarmEn,Trace Alarm Enable" bitfld.long 0x10 0.--2. "TRACEALARMEN,Register TraceAlarmEn controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set" "0,1,2,3,4,5,6,7" rgroup.long 0x1C++0x3 line.long 0x0 "TraceAlarmStatus,Trace Alarm Status" bitfld.long 0x0 0.--2. "TRACEALARMSTATUS,Register TraceAlarmStatus is a read-only register that indicates which lookup table or filter has been matched by a packet independently of register TraceAlarmEn bit configuration" "0,1,2,3,4,5,6,7" wgroup.long 0x20++0x3 line.long 0x0 "TraceAlarmClr,Trace Alarm Clear" eventfld.long 0x0 0.--2. "TRACEALARMCLR,Setting a bit to 1 in register TraceAlarmClr clears the corresponding bit in register TraceAlarmStatus" "0,1,2,3,4,5,6,7" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." group.long 0x80++0x2B line.long 0x0 "Filters_0_RouteIdBase,Filter n Route ID Base" hexmask.long.tbyte 0x0 0.--19. 1. "FILTERS_ROUTEIDBASE,Filter n Route ID Base" line.long 0x4 "Filters_0_RouteIdMask,Filter n Route ID Mask" hexmask.long.tbyte 0x4 0.--19. 1. "FILTERS_ROUTEIDMASK,Filter n Route ID Mask" line.long 0x8 "Filters_0_AddrBase_Low,Filter n Addr Base Low" hexmask.long 0x8 0.--31. 1. "FILTERS_ADDRBASE_LOW,Address LSB register" line.long 0xC "Filters_0_AddrBase_High,Filter n Addr Base High" hexmask.long.byte 0xC 0.--7. 1. "FILTERS_ADDRBASE_HIGH,Address MSB register" line.long 0x10 "Filters_0_WindowSize,Filter n Window Size" hexmask.long.byte 0x10 0.--5. 1. "FILTERS_WINDOWSIZE,Window Size" line.long 0x14 "Filters_0_SecurityBase,Filter n Security Base" bitfld.long 0x14 0.--2. "FILTERS_SECURITYBASE,Security Base" "0,1,2,3,4,5,6,7" line.long 0x18 "Filters_0_SecurityMask,Filter n Security Mask" bitfld.long 0x18 0.--2. "FILTERS_0_SECURITYMASK,Security Mask" "0,1,2,3,4,5,6,7" line.long 0x1C "Filters_0_Opcode,Filter n Packet Probe" bitfld.long 0x1C 3. "URGEN,Selects URG packets (urgency)." "0,1" bitfld.long 0x1C 2. "LOCKEN,Selects RDX-WR RDL WRC and Linked sequence." "0,1" newline bitfld.long 0x1C 1. "WREN,Selects WR packets." "0,1" bitfld.long 0x1C 0. "RDEN,Selects RD packets." "0,1" line.long 0x20 "Filters_0_Status,Filter n Status" bitfld.long 0x20 1. "RSPEN,Selects RSP and FAIL-CONT status packets." "0,1" bitfld.long 0x20 0. "REQEN,Selects REQ status packets." "0,1" line.long 0x24 "Filters_0_Length,Filter n Length" hexmask.long.byte 0x24 0.--3. 1. "FILTERS_0_LENGTH,Length" line.long 0x28 "Probe_main_Probe_Filters_0_Urgency,Register Filters_0_Urgency" bitfld.long 0x28 0.--1. "FILTERS_0_URGENCY,Register Urgency contains the minimum urgency level used to filter packets" "0,1,2,3" group.long 0xE0++0x2B line.long 0x0 "Filters_1_RouteIdBase,Filter n Route ID Base" hexmask.long.tbyte 0x0 0.--19. 1. "FILTERS_ROUTEIDBASE,Filter n Route ID Base" line.long 0x4 "Filters_1_RouteIdMask,Filter n Route ID Mask" hexmask.long.tbyte 0x4 0.--19. 1. "FILTERS_ROUTEIDMASK,Filter n Route ID Mask" line.long 0x8 "Filters_1_AddrBase_Low,Filter n Addr Base Low" hexmask.long 0x8 0.--31. 1. "FILTERS_ADDRBASE_LOW,Address LSB register" line.long 0xC "Filters_1_AddrBase_High,Filter n Addr Base High" hexmask.long.byte 0xC 0.--7. 1. "FILTERS_ADDRBASE_HIGH,Address MSB register" line.long 0x10 "Filters_1_WindowSize,Filter n Window Size" hexmask.long.byte 0x10 0.--5. 1. "FILTERS_WINDOWSIZE,Window Size" line.long 0x14 "Filters_1_SecurityBase,Filter n Security Base" bitfld.long 0x14 0.--2. "FILTERS_SECURITYBASE,Security Base" "0,1,2,3,4,5,6,7" line.long 0x18 "Filters_1_SecurityMask,Filter n Security Mask" bitfld.long 0x18 0.--2. "FILTERS_1_SECURITYMASK,Security Mask" "0,1,2,3,4,5,6,7" line.long 0x1C "Filters_1_Opcode,Filter n Packet Probe" bitfld.long 0x1C 3. "URGEN,Selects URG packets (urgency)." "0,1" bitfld.long 0x1C 2. "LOCKEN,Selects RDX-WR RDL WRC and Linked sequence." "0,1" newline bitfld.long 0x1C 1. "WREN,Selects WR packets." "0,1" bitfld.long 0x1C 0. "RDEN,Selects RD packets." "0,1" line.long 0x20 "Filters_1_Status,Filter n Status" bitfld.long 0x20 1. "RSPEN,Selects RSP and FAIL-CONT status packets." "0,1" bitfld.long 0x20 0. "REQEN,Selects REQ status packets." "0,1" line.long 0x24 "Filters_1_Length,Filter n Length" hexmask.long.byte 0x24 0.--3. 1. "FILTERS_1_LENGTH,Length" line.long 0x28 "Probe_main_Probe_Filters_1_Urgency,Register Filters_1_Urgency" bitfld.long 0x28 0.--1. "FILTERS_1_URGENCY,Register Urgency contains the minimum urgency level used to filter packets" "0,1,2,3" repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x967E0200 ad:0x967E0210 ad:0x967E0220 ad:0x967E0230 ad:0x967E0240 ad:0x967E0250 ad:0x967E0260 ad:0x967E0270 ad:0x967E0280 ad:0x967E0290) tree "Counters[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "Counters__PortSel,Counters n Port Select" bitfld.long 0x0 0. "COUNTERS_PORTSEL,Port Select" "0,1" line.long 0x4 "Counters__Src,Counters n Source" hexmask.long.byte 0x4 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0xC)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_PROBE_TRANSACTION_XSTATPROFILER" base ad:0x980C0280 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." newline hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." newline hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x27 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_En,Register En" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Probe_Transaction_main_TransactionStatProfiler_Mode,Register Mode" hexmask.long.byte 0x4 0.--3. 1. "MODE,Register Mode sets the counting mode per observed port" line.long 0x8 "Probe_Transaction_main_TransactionStatProfiler_ObservedSel_0,Register ObservedSel_0" bitfld.long 0x8 0.--2. "OBSERVEDSEL_0,Register ObservedSel_i selects the port to be observed: 0." "0,1,2,3,4,5,6,7" line.long 0xC "Probe_Transaction_main_TransactionStatProfiler_ObservedSel_1,Register ObservedSel_1" bitfld.long 0xC 0.--2. "OBSERVEDSEL_1,Register ObservedSel_i selects the port to be observed: 1." "0,1,2,3,4,5,6,7" line.long 0x10 "Probe_Transaction_main_TransactionStatProfiler_ObservedSel_2,Register ObservedSel_2" bitfld.long 0x10 0.--2. "OBSERVEDSEL_2,Register ObservedSel_i selects the port to be observed: 2." "0,1,2,3,4,5,6,7" line.long 0x14 "Probe_Transaction_main_TransactionStatProfiler_ObservedSel_3,Register ObservedSel_3" bitfld.long 0x14 0.--2. "OBSERVEDSEL_3,Register ObservedSel_i selects the port to be observed: 3." "0,1,2,3,4,5,6,7" line.long 0x18 "Probe_Transaction_main_TransactionStatProfiler_NTenureLines_0,Register NTenureLines_0" bitfld.long 0x18 0.--2. "NTENURELINES_0,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 0" "0,1,2,3,4,5,6,7" line.long 0x1C "Probe_Transaction_main_TransactionStatProfiler_NTenureLines_1,Register NTenureLines_1" bitfld.long 0x1C 0.--2. "NTENURELINES_1,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 1" "0,1,2,3,4,5,6,7" line.long 0x20 "Probe_Transaction_main_TransactionStatProfiler_NTenureLines_2,Register NTenureLines_2" bitfld.long 0x20 0.--2. "NTENURELINES_2,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 2" "0,1,2,3,4,5,6,7" line.long 0x24 "Probe_Transaction_main_TransactionStatProfiler_Thresholds_0_0,Register Thresholds_0_0" hexmask.long.byte 0x24 0.--3. 1. "THRESHOLDS_0_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" group.long 0x3C++0x3 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_Thresholds_1_0,Register Thresholds_1_0" hexmask.long.byte 0x0 0.--3. 1. "THRESHOLDS_1_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" group.long 0x4C++0x3 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_Thresholds_2_0,Register Thresholds_2_0" hexmask.long.byte 0x0 0.--3. 1. "THRESHOLDS_2_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" group.long 0x5C++0x3 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_Thresholds_3_0,Register Thresholds_3_0" hexmask.long.byte 0x0 0.--3. 1. "THRESHOLDS_3_0,Register Thresholds_i_j contains the threshold index '0' that allows computation of threshold values" rgroup.long 0x6C++0x3 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_OverflowStatus,Register OverflowStatus" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" wgroup.long 0x70++0x3 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_OverflowReset,Register OverflowReset" hexmask.long.byte 0x0 0.--3. 1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" group.long 0x74++0x7 line.long 0x0 "Probe_Transaction_main_TransactionStatProfiler_PendingEventMode,Register PendingEventMode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "Probe_Transaction_main_TransactionStatProfiler_PreScaler,Register PreScaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree.end tree "NOC_RD_TRANSACTION_PROBE" base ad:0x980C0800 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." newline hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." newline hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "Probe_Transaction_main_Probe_MainCtl,Register MainCtl contains probe global control bits. The register has seven bit fields:" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" newline rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" newline bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" newline bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" newline bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "Probe_Transaction_main_Probe_CfgCtl,Stores global enable and active bits related to the probe." rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" newline bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "Probe_Transaction_main_Probe_StatPeriod,Register StatPeriod" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "Probe_Transaction_main_Probe_StatGo,Register StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." group.long 0x204++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_0_Src,Register CntSrc indicates the event source used to increment the counter. Unassigned values (non-existing Press level or ExtEvent index. or unimplemented Filter) are equivalent to OFF." bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" newline hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long 0x20C++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_0_Val,Register Counters_0_Val" hexmask.long 0x0 0.--31. 1. "COUNTERS_0_VAL,Register Val is a read-only register that is always present" group.long 0x214++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_1_Src,Register CntSrc indicates the event source used to increment the counter. Unassigned values (non-existing Press level or ExtEvent index. or unimplemented Filter) are equivalent to OFF." bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" newline hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long 0x21C++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_1_Val,Register Counters_1_Val" hexmask.long 0x0 0.--31. 1. "COUNTERS_1_VAL,Register Val is a read-only register that is always present" group.long 0x224++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_2_Src,Register CntSrc indicates the event source used to increment the counter. Unassigned values (non-existing Press level or ExtEvent index. or unimplemented Filter) are equivalent to OFF." bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" newline hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long 0x22C++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_2_Val,Register Counters_2_Val" hexmask.long 0x0 0.--31. 1. "COUNTERS_2_VAL,Register Val is a read-only register that is always present" group.long 0x234++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_3_Src,Register CntSrc indicates the event source used to increment the counter. Unassigned values (non-existing Press level or ExtEvent index. or unimplemented Filter) are equivalent to OFF." bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" newline hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long 0x23C++0x3 line.long 0x0 "Probe_Transaction_main_Probe_Counters_3_Val,Register Counters_3_Val" hexmask.long 0x0 0.--31. 1. "COUNTERS_3_VAL,Register Val is a read-only register that is always present" tree.end tree "NOC_SEERIS_2D" tree "NOC_SEERIS_2D_BLITTER_FU_RD_0_QOS" base ad:0x967E0480 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_SEERIS_2D_BLITTER_FU_RD_0_XSTAT" base ad:0x967E0680 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_2D_BLITTER_FU_RD_1_QOS" base ad:0x967E0500 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_SEERIS_2D_BLITTER_FU_RD_1_XSTAT" base ad:0x967E0700 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_2D_BLITTER_FU_RD_2_QOS" base ad:0x967E0580 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_SEERIS_2D_BLITTER_FU_RD_2_XSTAT" base ad:0x967E0780 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_2D_BLITTER_STORE_WR_QOS" base ad:0x967E0600 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--11. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_SEERIS_2D_BLITTER_STORE_WR_XSTAT" base ad:0x967E0800 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree.end tree "NOC_SEERIS_CMD" tree "NOC_SEERIS_CMD_SEQ_RD_XSTAT" base ad:0x967E0880 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_CMD_SEQ_WR_XSTAT" base ad:0x967E0900 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree.end tree "NOC_SEERIS_DISPLAY" tree "NOC_SEERIS_DISPLAY_CTRL_RD_0_XSTAT" base ad:0x967E0980 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_1_XSTAT" base ad:0x967E0A00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_2_XSTAT" base ad:0x967E0A80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_3_XSTAT" base ad:0x967E0B00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_4_XSTAT" base ad:0x967E0B80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_5_XSTAT" base ad:0x967E0C00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_6_XSTAT" base ad:0x967E0C80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_7_XSTAT" base ad:0x967E0D00 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_SEERIS_DISPLAY_CTRL_RD_8_XSTAT" base ad:0x967E0D80 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree.end tree "NOC_SRAMCTL" base ad:0x490A0000 group.long 0x0++0xF line.long 0x0 "RAMCR,RAM Control" bitfld.long 0x0 8. "INIT_SYSA,Initialize With System Address" "0: Local,1: System" bitfld.long 0x0 1.--2. "IWS,Initialization Wait States" "0: Zero,1: One,2: Two,3: Three" newline bitfld.long 0x0 0. "INIT,Initialization Request" "0: Not requested,1: Requested" line.long 0x4 "RAMIAS,RAM Initialization Address Start" hexmask.long 0x4 0.--31. 1. "IAS,Initialization Address Start" line.long 0x8 "RAMIAE,RAM Initialization Address End" hexmask.long 0x8 0.--31. 1. "IAE,Initialization Address End" line.long 0xC "RAMSR,RAM Status" hexmask.long.byte 0xC 16.--23. 1. "EINFO,Event Information" hexmask.long.byte 0xC 8.--15. 1. "SYND,ECC Syndrome Value" newline eventfld.long 0xC 7. "SGLERR,ECC Single-Bit Error" "0: No error occurred,1: An error occurred" eventfld.long 0xC 6. "MLTERR,ECC Multi-Bit Error" "0: No error occurred,1: An error occurred" newline eventfld.long 0xC 5. "AERR,ECC Address Error" "0: No error occurred,1: An error occurred" eventfld.long 0xC 3. "AVALID,Addresses Valid" "0: Addresses do not correspond to an event,1: Addresses correspond to an event" newline rbitfld.long 0xC 2. "IPEND,Initialization Pending" "0: Not in progress,1: In progress" eventfld.long 0xC 1. "BUSERR,Bus Error" "0: No error occurred since the last time this field..,1: An error occurred" newline eventfld.long 0xC 0. "IDONE,Initialization Done" "0: An initialization was not requested is in..,1: An initialization completed successfully" rgroup.long 0x10++0x3 line.long 0x0 "RAMMEMA,RAM ECC Address" hexmask.long.byte 0x0 20.--24. 1. "BANK,RAM Bank ID" hexmask.long.tbyte 0x0 0.--16. 1. "MEMA,RAM Bank Address" rgroup.long 0x18++0x3 line.long 0x0 "RAMSYSA,RAM System Address" hexmask.long 0x0 0.--31. 1. "SYSA,System Address" group.long 0x1C++0xF line.long 0x0 "RAMECCNT,RAM Correctable Error Count" hexmask.long.byte 0x0 0.--7. 1. "ECCNT,ECC Correctable Error Count" line.long 0x4 "RAMEID0,RAM Error Injection Data 0" hexmask.long 0x4 0.--31. 1. "EID_W0,Error Injection Data Word 0" line.long 0x8 "RAMEID1,RAM Error Injection Data 1" hexmask.long 0x8 0.--31. 1. "EID_W1,Error Injection Data Word 1" line.long 0xC "RAMEIDC,RAM Error Injection Data Control" bitfld.long 0xC 31. "EID_EN,Error Injection Data Enable" "0: No injection,1: Local injection" bitfld.long 0xC 30. "EIA_EN,Error Injection Address Enable" "0: Ignore RAMEIA and RAMEIAM,1: Enable RAMEIA and RAMEIAM" newline bitfld.long 0xC 24. "EIP_EN,Error Injection Into Pipeline Enable" "0: No error injected,1: Error injected" hexmask.long.byte 0xC 0.--7. 1. "EID_CKB,Error Injection Data Checkbits" group.long 0x30++0x7 line.long 0x0 "RAMEIA,RAM Error Injection Base Address" hexmask.long 0x0 0.--31. 1. "EIA,Error Injection Base Address" line.long 0x4 "RAMEIAM,RAM Error Injection Address Mask" hexmask.long 0x4 0.--31. 1. "EIAM,Error Injection Address Mask" group.long 0x40++0x3 line.long 0x0 "RAMMAXA,RAM Maximum-Value Address" hexmask.long 0x0 0.--31. 1. "MAXA,Maximum Address" group.long 0x80++0x3 line.long 0x0 "RAMCR2,RAM Control 2" bitfld.long 0x0 3. "DEM,Disable Exclusive Monitor" "0: Enabled,1: Disabled" tree.end tree "NOC_SSI" tree "NOC_SSI_FWD_MAIN_PROBE" base ad:0x4AFF0800 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" line.long 0x8 "TracePortSel,Trace Port Select" bitfld.long 0x8 0. "TRACEPORTSEL,Register TracePortSel indicates which generic protocol link is currently being observed by trace logic" "0,1" line.long 0xC "FilterLut,Filter Lookup Table" hexmask.long.byte 0xC 0.--3. 1. "FILTERLUT,Register FilterLut contains a look-up table that is used to combine filter outputs in order to trace packets" line.long 0x10 "TraceAlarmEn,Trace Alarm Enable" bitfld.long 0x10 0.--2. "TRACEALARMEN,Register TraceAlarmEn controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set" "0,1,2,3,4,5,6,7" rgroup.long 0x1C++0x3 line.long 0x0 "TraceAlarmStatus,Trace Alarm Status" bitfld.long 0x0 0.--2. "TRACEALARMSTATUS,Register TraceAlarmStatus is a read-only register that indicates which lookup table or filter has been matched by a packet independently of register TraceAlarmEn bit configuration" "0,1,2,3,4,5,6,7" wgroup.long 0x20++0x3 line.long 0x0 "TraceAlarmClr,Trace Alarm Clear" eventfld.long 0x0 0.--2. "TRACEALARMCLR,Setting a bit to 1 in register TraceAlarmClr clears the corresponding bit in register TraceAlarmStatus" "0,1,2,3,4,5,6,7" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." group.long 0x80++0x13 line.long 0x0 "Filters_0_RouteIdBase,Filter n Route ID Base" hexmask.long 0x0 0.--24. 1. "FILTERS_ROUTEIDBASE,Filter n Route ID Base" line.long 0x4 "Filters_0_RouteIdMask,Filter n Route ID Mask" hexmask.long 0x4 0.--24. 1. "FILTERS_ROUTEIDMASK,Filter n Route ID Mask" line.long 0x8 "Filters_0_AddrBase_Low,Filter n Addr Base Low" hexmask.long 0x8 0.--31. 1. "FILTERS_ADDRBASE_LOW,Address LSB register" line.long 0xC "Filters_0_AddrBase_High,Filter n Addr Base High" hexmask.long.word 0xC 0.--12. 1. "FILTERS_ADDRBASE_HIGH,Address MSB register" line.long 0x10 "Filters_0_WindowSize,Filter n Window Size" hexmask.long.byte 0x10 0.--5. 1. "FILTERS_WINDOWSIZE,Window Size" group.long 0x9C++0xF line.long 0x0 "Filters_0_Opcode,Filter n Packet Probe" bitfld.long 0x0 3. "URGEN,Selects URG packets (urgency)." "0,1" bitfld.long 0x0 2. "LOCKEN,Selects RDX-WR RDL WRC and Linked sequence." "0,1" newline bitfld.long 0x0 1. "WREN,Selects WR packets." "0,1" bitfld.long 0x0 0. "RDEN,Selects RD packets." "0,1" line.long 0x4 "Filters_0_Status,Filter n Status" bitfld.long 0x4 1. "RSPEN,Selects RSP and FAIL-CONT status packets." "0,1" bitfld.long 0x4 0. "REQEN,Selects REQ status packets." "0,1" line.long 0x8 "Filters_0_Length,Filter n Length" hexmask.long.byte 0x8 0.--3. 1. "FILTERS_0_LENGTH,Length" line.long 0xC "Probe_SSI_FWD_main_Probe_Filters_0_Urgency,Register Filters_0_Urgency" bitfld.long 0xC 0.--2. "FILTERS_0_URGENCY,Register Urgency contains the minimum urgency level used to filter packets" "0,1,2,3,4,5,6,7" group.long 0xE0++0x13 line.long 0x0 "Filters_1_RouteIdBase,Filter n Route ID Base" hexmask.long 0x0 0.--24. 1. "FILTERS_ROUTEIDBASE,Filter n Route ID Base" line.long 0x4 "Filters_1_RouteIdMask,Filter n Route ID Mask" hexmask.long 0x4 0.--24. 1. "FILTERS_ROUTEIDMASK,Filter n Route ID Mask" line.long 0x8 "Filters_1_AddrBase_Low,Filter n Addr Base Low" hexmask.long 0x8 0.--31. 1. "FILTERS_ADDRBASE_LOW,Address LSB register" line.long 0xC "Filters_1_AddrBase_High,Filter n Addr Base High" hexmask.long.word 0xC 0.--12. 1. "FILTERS_ADDRBASE_HIGH,Address MSB register" line.long 0x10 "Filters_1_WindowSize,Filter n Window Size" hexmask.long.byte 0x10 0.--5. 1. "FILTERS_WINDOWSIZE,Window Size" group.long 0xFC++0xF line.long 0x0 "Filters_1_Opcode,Filter n Packet Probe" bitfld.long 0x0 3. "URGEN,Selects URG packets (urgency)." "0,1" bitfld.long 0x0 2. "LOCKEN,Selects RDX-WR RDL WRC and Linked sequence." "0,1" newline bitfld.long 0x0 1. "WREN,Selects WR packets." "0,1" bitfld.long 0x0 0. "RDEN,Selects RD packets." "0,1" line.long 0x4 "Filters_1_Status,Filter n Status" bitfld.long 0x4 1. "RSPEN,Selects RSP and FAIL-CONT status packets." "0,1" bitfld.long 0x4 0. "REQEN,Selects REQ status packets." "0,1" line.long 0x8 "Filters_1_Length,Filter n Length" hexmask.long.byte 0x8 0.--3. 1. "FILTERS_1_LENGTH,Length" line.long 0xC "Probe_SSI_FWD_main_Probe_Filters_1_Urgency,Register Filters_1_Urgency" bitfld.long 0xC 0.--2. "FILTERS_1_URGENCY,Register Urgency contains the minimum urgency level used to filter packets" "0,1,2,3,4,5,6,7" repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4AFF0A00 ad:0x4AFF0A10 ad:0x4AFF0A20 ad:0x4AFF0A30 ad:0x4AFF0A40 ad:0x4AFF0A50 ad:0x4AFF0A60 ad:0x4AFF0A70 ad:0x4AFF0A80 ad:0x4AFF0A90) tree "Counters[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "Counters__PortSel,Counters n Port Select" bitfld.long 0x0 0. "COUNTERS_PORTSEL,Port Select" "0,1" line.long 0x4 "Counters__Src,Counters n Source" hexmask.long.byte 0x4 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0xC)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_SSI_MASTER_ERROR_ERRLOG_0" base ad:0x980C0000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x3 line.long 0x0 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_FaultEn,Register FaultEn" bitfld.long 0x0 0. "FAULTEN,Set to 1 to enable output signal Fault. Fault asserted when ErrVld is 1." "0,1" rgroup.long 0xC++0x3 line.long 0x0 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_ErrVld,Register ErrVld" bitfld.long 0x0 0. "ERRVLD,1 indicates an error has been logged" "0,1" wgroup.long 0x10++0x3 line.long 0x0 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_ErrClr,Register ErrClr" eventfld.long 0x0 0. "ERRCLR,Set to 1 to clear ErrVld. NOTE The written value is not stored in ErrVld. A read always returns 0." "0,1" rgroup.long 0x14++0x7 line.long 0x0 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_ErrLog0,Stores NTTP packet header fields Lock. Opc. ErrCode. Len1 and indicates version of NTTP transport protocol" bitfld.long 0x0 31. "FORMAT,NTTP transport protocol version" "0,1" hexmask.long.byte 0x0 16.--23. 1. "LEN1,Len1" bitfld.long 0x0 8.--10. "ERRCODE,ErrCode" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 1.--4. 1. "OPC,Opc" bitfld.long 0x0 0. "LOCK,Lock" "0,1" line.long 0x4 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_ErrLog1,Register ErrLog1" hexmask.long.tbyte 0x4 0.--19. 1. "ERRLOG1,Stores NTTP packet header field RouteId (LSBs) of the logged error" rgroup.long 0x20++0x7 line.long 0x0 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_ErrLog3,Register ErrLog3" hexmask.long 0x0 0.--31. 1. "ERRLOG3,Stores NTTP packet header field Addr (LSBs) of the logged error" line.long 0x4 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_ErrLog4,Register ErrLog4" hexmask.long.tbyte 0x4 0.--16. 1. "ERRLOG4,Stores NTTP packet header field Addr (MSBs) of the logged error" group.long 0x4C++0x3 line.long 0x0 "observer_SSI_MASTER_ERROR_main_ErrorLogger_0_StallEn,Register StallEn" bitfld.long 0x0 0. "STALLEN,Set to 1 to enable stall mode behavior." "0,1" tree.end tree "NOC_SSI_PRI_PROBE_MAIN_PROBE" base ad:0x4C800000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" line.long 0x8 "TracePortSel,Trace Port Select" bitfld.long 0x8 0. "TRACEPORTSEL,Register TracePortSel indicates which generic protocol link is currently being observed by trace logic" "0,1" line.long 0xC "FilterLut,Filter Lookup Table" hexmask.long.byte 0xC 0.--3. 1. "FILTERLUT,Register FilterLut contains a look-up table that is used to combine filter outputs in order to trace packets" line.long 0x10 "TraceAlarmEn,Trace Alarm Enable" bitfld.long 0x10 0.--2. "TRACEALARMEN,Register TraceAlarmEn controls which lookup table or filter can set the TraceAlarm signal output once the trace alarm status is set" "0,1,2,3,4,5,6,7" rgroup.long 0x1C++0x3 line.long 0x0 "TraceAlarmStatus,Trace Alarm Status" bitfld.long 0x0 0.--2. "TRACEALARMSTATUS,Register TraceAlarmStatus is a read-only register that indicates which lookup table or filter has been matched by a packet independently of register TraceAlarmEn bit configuration" "0,1,2,3,4,5,6,7" wgroup.long 0x20++0x3 line.long 0x0 "TraceAlarmClr,Trace Alarm Clear" eventfld.long 0x0 0.--2. "TRACEALARMCLR,Setting a bit to 1 in register TraceAlarmClr clears the corresponding bit in register TraceAlarmStatus" "0,1,2,3,4,5,6,7" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 2. (list 0x0 0x1)(list ad:0x4C800080 ad:0x4C8000E0) tree "RouteIdBase[$1]" base $2 group.long ($2)++0x2B line.long 0x0 "Filters__RouteIdBase,Filter n Route ID Base" hexmask.long.tbyte 0x0 0.--19. 1. "FILTERS_ROUTEIDBASE,Filter n Route ID Base" line.long 0x4 "Filters__RouteIdMask,Filter n Route ID Mask" hexmask.long.tbyte 0x4 0.--19. 1. "FILTERS_ROUTEIDMASK,Filter n Route ID Mask" line.long 0x8 "Filters__AddrBase_Low,Filter n Addr Base Low" hexmask.long 0x8 0.--31. 1. "FILTERS_ADDRBASE_LOW,Address LSB register" line.long 0xC "Filters__AddrBase_High,Filter n Addr Base High" hexmask.long.byte 0xC 0.--7. 1. "FILTERS_ADDRBASE_HIGH,Address MSB register" line.long 0x10 "Filters__WindowSize,Filter n Window Size" hexmask.long.byte 0x10 0.--5. 1. "FILTERS_WINDOWSIZE,Window Size" line.long 0x14 "Filters__SecurityBase,Filter n Security Base" bitfld.long 0x14 0.--2. "FILTERS_SECURITYBASE,Security Base" "0,1,2,3,4,5,6,7" line.long 0x18 "Filters__SecurityMask,Filter n Security Mask" bitfld.long 0x18 0.--2. "FILTERS_0_SECURITYMASK,Security Mask" "0,1,2,3,4,5,6,7" line.long 0x1C "Filters__Opcode,Filter n Packet Probe" bitfld.long 0x1C 3. "URGEN,Selects URG packets (urgency)." "0,1" bitfld.long 0x1C 2. "LOCKEN,Selects RDX-WR RDL WRC and Linked sequence." "0,1" bitfld.long 0x1C 1. "WREN,Selects WR packets." "0,1" bitfld.long 0x1C 0. "RDEN,Selects RD packets." "0,1" line.long 0x20 "Filters__Status,Filter n Status" bitfld.long 0x20 1. "RSPEN,Selects RSP and FAIL-CONT status packets." "0,1" bitfld.long 0x20 0. "REQEN,Selects REQ status packets." "0,1" line.long 0x24 "Filters__Length,Filter n Length" hexmask.long.byte 0x24 0.--3. 1. "FILTERS_0_LENGTH,Length" line.long 0x28 "Filters__Urgency,Filter n Urgency" bitfld.long 0x28 0.--1. "FILTERS_0_URGENCY,Urgency" "0,1,2,3" tree.end repeat.end repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4C800200 ad:0x4C800210 ad:0x4C800220 ad:0x4C800230 ad:0x4C800240 ad:0x4C800250 ad:0x4C800260 ad:0x4C800270 ad:0x4C800280 ad:0x4C800290) tree "Counters[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "Counters__PortSel,Counters n Port Select" bitfld.long 0x0 0. "COUNTERS_PORTSEL,Port Select" "0,1" line.long 0x4 "Counters__Src,Counters n Source" hexmask.long.byte 0x4 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0xC)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree.end tree "NOC_TCU" base ad:0x49040000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" newline bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" tree.end tree "NOC_USB" tree "NOC_USB1_AXI_SLAVE_RD_I_XSTATFILTER" base ad:0x980C0200 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "USB1_AXI_Slave_rd_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "USB1_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "USB1_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "USB1_AXI_Slave_rd_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "USB1_AXI_Slave_rd_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree "NOC_USB1_AXI_SLAVE_WR_I_XSTATFILTER" base ad:0x980C0180 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "USB1_AXI_Slave_wr_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "USB1_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "USB1_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "USB1_AXI_Slave_wr_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "USB1_AXI_Slave_wr_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree "NOC_USB2_AXI_SLAVE_RD_I_XSTATFILTER" base ad:0x980C0100 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "USB2_AXI_Slave_rd_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "USB2_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "USB2_AXI_Slave_rd_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "USB2_AXI_Slave_rd_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "USB2_AXI_Slave_rd_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree "NOC_USB2_AXI_SLAVE_WR_I_XSTATFILTER" base ad:0x980C0080 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "USB2_AXI_Slave_wr_I_main_TransactionStatFilter_Mode,Register Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "USB2_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_Low,Register AddrBase_Low" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "USB2_AXI_Slave_wr_I_main_TransactionStatFilter_AddrBase_High,Register AddrBase_High" hexmask.long.tbyte 0x8 0.--16. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "USB2_AXI_Slave_wr_I_main_TransactionStatFilter_AddrWindowSize,Register AddrWindowSize" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x3 line.long 0x0 "USB2_AXI_Slave_wr_I_main_TransactionStatFilter_Opcode,This register selects candidate packets based on packet opcodes. (0 disables the filter):" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" tree.end tree.end tree "NOC_USDHC1_GENERICTOTRANSPORT" base ad:0x42830000 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code" hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself" group.long 0x8++0x3 line.long 0x0 "NbPktMax0,Nb Max Packet 0" hexmask.long.byte 0x0 0.--7. 1. "NBPKTMAX0,Max transport pkt pending for shapingId 0" tree.end tree "NOC_VPU" tree "NOC_VPU_PRI_PROBE_MAIN_PROBE" base ad:0x4C800400 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "MainCtl,Main Control" bitfld.long 0x0 7. "FILTBYTEALWAYSCHAINABLEEN,When set to 0 filters are mapped to all statistic counters when counting bytes or enabled bytes" "0,1" rbitfld.long 0x0 6. "INTRUSIVEMODE,When set to 1 register field IntrusiveMode enables trace operation in Intrusive flow-control mode" "0,1" newline bitfld.long 0x0 5. "STATCONDDUMP,When set register field StatCondDump enables the dump of a statistics frame to the range of counter values set for registers StatAlarmMin StatAlarmMax and AlarmMode" "0,1" bitfld.long 0x0 4. "ALARMEN,When set register field AlarmEn enables the probe to collect alarm-related information" "0,1" newline bitfld.long 0x0 3. "STATEN,When set to 1 register field StatEn enables statistics profiling" "0,1" bitfld.long 0x0 2. "PAYLOADEN,Register field PayloadEn when set to 1 enables traces to contain headers and payload" "0,1" newline rbitfld.long 0x0 1. "TRACEEN,Register field TraceEn enables the probe to send filtered packets (Trace) on the ObsTx observation output" "0,1" bitfld.long 0x0 0. "ERREN,Register field ErrEn enables the probe to send on the ObsTx output any packet with Error status independently of filtering mechanisms thus constituting a simple supplementary global filter" "0,1" line.long 0x4 "CfgCtl,Configuration Control" rbitfld.long 0x4 1. "ACTIVE,Active status of the packet probe." "0,1" bitfld.long 0x4 0. "GLOBALEN,Enables or disables the tracing and statistics collection subsystems of the packet probe." "0,1" group.long 0x24++0x3 line.long 0x0 "StatPeriod,Statistics Period" hexmask.long.byte 0x0 0.--4. 1. "STATPERIOD,Register StatPeriod is a 5-bit register that sets a period within a range of 2 cycles to 2 gigacycles during which statistics are collected before being dumped automatically" wgroup.long 0x28++0x3 line.long 0x0 "StatGo,StatGo" eventfld.long 0x0 0. "STATGO,Writing a 1 to the 1-bit pulse register StatGo generates a statistics dump" "?,1: bit pulse register StatGo generates a statistics.." repeat 10. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9)(list ad:0x4C800604 ad:0x4C800614 ad:0x4C800624 ad:0x4C800634 ad:0x4C800644 ad:0x4C800654 ad:0x4C800664 ad:0x4C800674 ad:0x4C800684 ad:0x4C800694) tree "Counters[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "Counters__Src,Counters n Source" bitfld.long 0x0 5. "EXTEVENT,When greater than 0 the entire register value is used to select an external hardware event source" "0,1" hexmask.long.byte 0x0 0.--4. 1. "INTEVENT,Internal packet event" rgroup.long ($2+0x8)++0x3 line.long 0x0 "Counters__Val,Counters n Value" hexmask.long.tbyte 0x0 0.--19. 1. "COUNTERS_VAL,Value" tree.end repeat.end tree.end tree "NOC_VPU_PRI_PROBE_TRANSTATPROFILER" base ad:0x4C800980 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x7 line.long 0x0 "EN,Enable" bitfld.long 0x0 0. "EN,Register En is a 1-bit register that enables the transaction probe counter unit." "?,1: bit register that enables the transaction probe.." line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Register Mode sets the counting mode per observed port" "0,1,2,3" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "TransactionStatProfiler_ObservedSel_[$1],ObservedSel n" bitfld.long 0x0 0. "OBSERVEDSEL,Register ObservedSel_i selects the port to be observed: 0." "0,1" repeat.end group.long 0x20++0x3 line.long 0x0 "NTenureLines_0,Number of Transaction Probe Lines" hexmask.long.byte 0x0 0.--3. 1. "NTENURELINES_0,Register nTenureLine_i indicates the number of transaction probe lines allocated to each observed port: 0" repeat 2. (list 0x0 0x1)(list ad:0x4C8009AC ad:0x4C8009BC) tree "Thresholds[$1]" base $2 repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2)++0x3 line.long 0x0 "TransactionStatProfiler_Thresholds__[$1],Transaction Profiler Thresholds Register" hexmask.long.word 0x0 0.--9. 1. "THRESHOLDS,Thresholds 0 0" repeat.end tree.end repeat.end base ad:0x4C800980 rgroup.long 0x6C++0x3 line.long 0x0 "OverflowStatus,Overflow Status" bitfld.long 0x0 0.--1. "OVERFLOWSTATUS,Bit n of register OverflowStatus is set to 1 if a start event occurs on observed port n and eitherof the following conditions occurs: All tenure counters allocated to the port are already in use" "0,1,2,3" wgroup.long 0x70++0x3 line.long 0x0 "OverflowReset,Overflow Reset" eventfld.long 0x0 0.--1. "OVERFLOWRESET,Register OverflowReset is a pulse register that clears overflow status bits per observed port on each write access" "0,1,2,3" group.long 0x74++0x7 line.long 0x0 "PendingEventMode,Pending Event Mode" bitfld.long 0x0 0. "PENDINGEVENTMODE,Register pendingEventMode is a 1-bit register that configures the pending event mode" "?,1: bit register that configures the pending event.." line.long 0x4 "PreScaler,Pre Scaler" hexmask.long.byte 0x4 0.--7. 1. "PRESCALER,8Register Prescaler is an-bit pre-scaling register that accepts any pre-scaling value between 1 (default) and 256" tree.end tree "NOC_VPU_PRI_RD_I_QOSGENERATOR" base ad:0x4C800800 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "NOC_VPU_PRI_RD_I_TRANSTATFILTER" base ad:0x4C800880 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree "NOC_VPU_PRI_WR_I_TRANSTATFILTER" base ad:0x4C800900 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0xF line.long 0x0 "Mode,Mode" bitfld.long 0x0 0. "MODE,Register Mode is a 1-bit register that sets the filtering mode as follows: handshake Mode = 0 or latency Mode = 1" "?,1: bit register that sets the filtering mode as.." line.long 0x4 "AddrBase_Low,Address Base LSB" hexmask.long 0x4 0.--31. 1. "ADDRBASE_LOW,Address base LSB register." line.long 0x8 "AddrBase_High,Address Base MSB" hexmask.long.byte 0x8 0.--7. 1. "ADDRBASE_HIGH,Address base MSB register." line.long 0xC "AddrWindowSize,Address Window Size" hexmask.long.byte 0xC 0.--5. 1. "ADDRWINDOWSIZE,Register AddrWindowSize contains the encoded address mask used to filter packets: the effective Mask value is equal to ~(2**AddrWindowSize - 1)" group.long 0x20++0x13 line.long 0x0 "Opcode,Packet Opcode" bitfld.long 0x0 1. "WREN,When set to 1 selects WR requests." "0,1" bitfld.long 0x0 0. "RDEN,When set to 1 selects RD requests." "0,1" line.long 0x4 "UserBase,User Base" hexmask.long 0x4 0.--27. 1. "USERBASE,This register contains the User base used to filter requests." line.long 0x8 "UserMask,User Mask" hexmask.long 0x8 0.--27. 1. "USERMASK,This register contains the User mask used to filter requests." line.long 0xC "SecurityBase,Security Base" bitfld.long 0xC 0.--2. "SECURITYBASE,This register contains the Security base used to filter requests." "0,1,2,3,4,5,6,7" line.long 0x10 "SecurityMask,Security Mask" bitfld.long 0x10 0.--2. "SECURITYMASK,This register contains the Security mask used to filter requests." "0,1,2,3,4,5,6,7" tree.end tree.end tree.end tree "NPU (Neural Processing Unit Domain)" base ad:0x0 tree "NEUTRON" tree "NEUTRON0" base ad:0x4ABC0000 group.long 0x0++0x33 line.long 0x0 "CTRL,Control Register" rbitfld.long 0x0 31. "CTRL_SHADOW_BUSY,Control shadow busy" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "PIPELINE_ENABLE,Pipeline Start" line.long 0x4 "FORMAT,Format Register" bitfld.long 0x4 31. "COMPMULT,Use 1s complement weights" "0,1" newline bitfld.long 0x4 30. "VECTMULT,Use Vector Mult" "0,1" newline bitfld.long 0x4 27.--29. "ACTIVATION_MODE,Activation Mode" "0: None,1: reLU,2: Sigmoid,3: HSWISH,4: tanh,5: eLU,6: exp (for negative input range up to 0),7: leakyRELU" newline bitfld.long 0x4 26. "USE_SCALER,Use scaler" "0,1" newline bitfld.long 0x4 24. "USE_B,Use Bias" "0,1" newline bitfld.long 0x4 19. "SIGN_R,Signed Result" "0,1" newline bitfld.long 0x4 18. "SIGN_B,SIGNED BIAS" "0,1" newline bitfld.long 0x4 17. "SIGN_D,Signed Data" "0,1" newline bitfld.long 0x4 16. "SIGN_W,Signed Weights" "0,1" newline bitfld.long 0x4 15. "DONT_REARRANGEW,Use Weights" "0,1" newline bitfld.long 0x4 12.--13. "ACCDNSHIFT,Accumulation Downshift" "0: no pre-shift accumulator,1: downshift 4,2: downshift 8,3: downshift 12" newline bitfld.long 0x4 10. "SLOW16BIT,Slow 16bit mode" "0,1" newline bitfld.long 0x4 9. "INTRLVRES,Interleave Results" "0,1" newline bitfld.long 0x4 8. "SCALER_SIZE,Scaler size" "0: Represents 32-bit dequant factor,1: Represents 16-bit scaler or FP16 scaler format." newline bitfld.long 0x4 6.--7. "RSIZE,Size of Post-Scaler" "0,1,2,3" newline bitfld.long 0x4 4.--5. "BSIZE,Size Bias" "0,1,2,3" newline bitfld.long 0x4 2.--3. "DSIZE,Size Data" "0,1,2,3" newline bitfld.long 0x4 0.--1. "WSIZE,Size Weights" "0,1,2,3" line.long 0x8 "LENGTH,Lenght Register" hexmask.long.word 0x8 16.--31. 1. "DATA,Number of data (row length)" newline hexmask.long.word 0x8 0.--15. 1. "ROWS,Number of Matrix rows" line.long 0xC "WEIGHTBASE,Weight Base Register" hexmask.long 0xC 0.--31. 1. "BASE,Base address for Weights" line.long 0x10 "BIASBASE,Base address for Biases" hexmask.long 0x10 0.--31. 1. "BASE,Base address for Bases" line.long 0x14 "ARGMAXBASE,Base address for ARGMAX indices" hexmask.long 0x14 0.--31. 1. "BASE,Specifies base address for ARGMAX results." line.long 0x18 "SCALEBASE,Scale Base" hexmask.long 0x18 0.--31. 1. "BASE,Base address for Scalers" line.long 0x1C "ACTCTRL,Activation Control Register" hexmask.long.word 0x1C 16.--31. 1. "CLIPMIN,Clip min value" newline hexmask.long.word 0x1C 0.--15. 1. "CLIPMAX,Clip max value" line.long 0x20 "DEQUANT,Dequant Register" hexmask.long.word 0x20 16.--31. 1. "CMN_SCALER_VAL,Common Scale Value" newline hexmask.long.byte 0x20 8.--15. 1. "ACT_OFF,Activation Offset" newline bitfld.long 0x20 7. "USE_COMMON_DEQUANT,Use common dequant factor" "0,1" newline bitfld.long 0x20 6. "USE_FP16_BIAS,Dequantization using FP16 Bias" "0,1" newline hexmask.long.byte 0x20 0.--5. 1. "CMN_SHIFT,Common Shift factor" line.long 0x24 "BATCH,Batch Count Register" hexmask.long.word 0x24 0.--15. 1. "COUNT,Matrix by Column" line.long 0x28 "RESCTRL,Result Control Register" bitfld.long 0x28 31. "POOL_RESTART,Reset Pool" "0,1" newline bitfld.long 0x28 30. "POOL_ADDER,Vector Addition" "0,1" newline bitfld.long 0x28 29. "POOL_DEF0,Force Max Pool to Zero" "0,1" newline bitfld.long 0x28 28. "PARTIAL_RESTORE,Partial Restore" "0,1" newline bitfld.long 0x28 27. "PARTIAL_REUSE,Partial Reuse" "0,1" newline bitfld.long 0x28 26. "IGNORE_RESULTS,IGNORE RESULTS" "0,1" newline bitfld.long 0x28 25. "IGNORE_POOL,IGNORE POOL" "0,1" newline bitfld.long 0x28 24. "ARGMAX_BYTE,ARGMAX Byte" "0,1" newline bitfld.long 0x28 23. "ARGMAX_EN,Use this bit to enable ARGMAX function. ARGMAX results will be written out to the memory address specified by ARGMAXBASE register." "0,1" newline bitfld.long 0x28 19.--20. "POOL_DEPTH,Pooling Depth" "0,1,2,3" newline bitfld.long 0x28 16.--18. "POOLY_SIZE,Output max poolY" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x28 4.--15. 1. "POOLX_SIZE,Output max poolX" newline hexmask.long.byte 0x28 0.--3. 1. "PIPE_STRIDE,Skip unused pipelines" line.long 0x2C "RES_Y,Result Writer Config Y" hexmask.long.byte 0x2C 28.--31. 1. "COUNT,Y-count" newline hexmask.long 0x2C 0.--27. 1. "STRIDE,Y-Stride" line.long 0x30 "RES_X,Result Writer Config X" hexmask.long.word 0x30 16.--31. 1. "COUNT,X-count" newline hexmask.long.word 0x30 0.--15. 1. "STRIDE,X-Stride" group.long 0x3C++0x13 line.long 0x0 "FLUSH,Flush Register" bitfld.long 0x0 1. "BATCH,Each Batchs FLUSH execute" "0,1" newline bitfld.long 0x0 0. "JOB,All Batchs FLUSH execute" "0,1" line.long 0x4 "INTR,Interrupt Register" bitfld.long 0x4 6.--7. "EVENT_MODE,Event mode" "0,1,2,3" newline bitfld.long 0x4 4.--5. "MODE,Interrupt mode" "0: Interrupt on completion,1: Interrupt on job loaded,2: Interrupt when Neutron IDLE,3: Interrupt on ERROR" newline eventfld.long 0x4 3. "ERRORTRAP_R,Error Trap for RES Bus" "0,1" newline eventfld.long 0x4 2. "ERRORTRAP_M,Error Trap" "0,1" newline bitfld.long 0x4 1. "EVENTEN,Event Enable" "0,1" newline bitfld.long 0x4 0. "INTREN,Interrupt Enable" "0,1" line.long 0x8 "WEIGHTCTRL,Weight Control Register" bitfld.long 0x8 10. "USE_WEIGHT_COLUMN,Use weight column" "0,1" newline bitfld.long 0x8 9. "MULT_WT_DATA_NEG,Multiply data by weight if data is negative" "0,1" newline bitfld.long 0x8 8. "SQUARE_DATA,Square data" "0,1" newline bitfld.long 0x8 6. "WCTRL_MUL_BY_1_SELECTIVE,Selective multiply by 1 mode" "0,1" newline bitfld.long 0x8 5. "WCTRL_MUL_BY_1,No Weights Register" "0,1" newline bitfld.long 0x8 4. "WCTRL_USE_CODEBOOK,Codebook Register" "0,1" newline bitfld.long 0x8 1.--3. "WCTRL_MINI_W_SIZE,Mini Weight Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0. "WCTRL_USE_MINI_W,Mini Weights Enable" "0,1" line.long 0xC "CIRCADDR,Circular Address Register" hexmask.long.word 0xC 16.--31. 1. "RESMASK,Res circular address mask" newline hexmask.long.word 0xC 0.--15. 1. "DATMASK,Data circular address mask" line.long 0x10 "PROGSEQ,PROGSEQ" hexmask.long 0x10 2.--31. 1. "BASE,Location of Sequencer code" newline bitfld.long 0x10 0. "ENABLE,Enable Register loading Sequencer" "0,1" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x50)++0x3 line.long 0x0 "SCRATCH[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "CODEBOOK[$1],Codebook Register i" hexmask.long 0x0 0.--31. 1. "CODE,Codebook code" repeat.end group.long 0xA0++0x2F line.long 0x0 "CANVAS_SIZE,Canvas Size Register" bitfld.long 0x0 27.--29. "READ_HEIGHT,Read Height" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "LOAD_HEIGHT,Load Height" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 16.--23. 1. "PIPE_Y_CNT,Pipeline Y Count Config" newline hexmask.long.word 0x0 0.--15. 1. "XTOTAL,Canvas XTOTAL" line.long 0x4 "CANVAS_READ_CONV,Canvas Conv Register" bitfld.long 0x4 31. "STRIDE2EN,Stride 2 Enable" "0,1" newline hexmask.long.word 0x4 16.--30. 1. "STRIDE,Conv Stride" newline hexmask.long.word 0x4 0.--15. 1. "X_SIZE,Convolution X Size" line.long 0x8 "CANVAS_LOAD_PAD,Canvas Load Pad Register" hexmask.long.byte 0x8 24.--31. 1. "VAL,Pad Value" newline hexmask.long.word 0x8 8.--23. 1. "LEFT,Horizontal Padding" newline hexmask.long.byte 0x8 0.--5. 1. "TOP,Top Padding" line.long 0xC "CANVAS_LOAD_Y,Y Dimension Stride Register" hexmask.long.word 0xC 22.--31. 1. "COUNT,Word Reads Register" newline hexmask.long.tbyte 0xC 0.--21. 1. "INC,Y Stride" line.long 0x10 "CANVAS_LOAD_X,X Dimension Stride Register" hexmask.long.byte 0x10 20.--27. 1. "COUNT,Count" newline hexmask.long.tbyte 0x10 0.--19. 1. "STRIDE,Offset Register" line.long 0x14 "CANVAS_LOAD_BATCH,Canvas Load Batch Register" hexmask.long.tbyte 0x14 12.--31. 1. "INC,Canvas Batch Inc" newline hexmask.long.word 0x14 0.--11. 1. "COUNT,Canvas Batch Count" line.long 0x18 "CANVAS_LOAD_OUTER_BATCH,Canvas Load Outer Batch Register" hexmask.long.tbyte 0x18 12.--31. 1. "INC,Canvas Outer Batch Inc" newline hexmask.long.word 0x18 0.--11. 1. "COUNT,Canvas Outer Batch Count" line.long 0x1C "CANVAS_SECONDARY_READ,Canvas Secondary Read" bitfld.long 0x1C 19. "SEC_EN,Enable Secondary Setting" "0,1" newline hexmask.long.byte 0x1C 12.--18. 1. "SEC_Y_CFG,Secondary Pipeline Y Config" newline hexmask.long.byte 0x1C 8.--11. 1. "SEC_HEIGHT,Secondary Read Height" newline hexmask.long.byte 0x1C 0.--7. 1. "SEC_DATA,Data Consumed Value" line.long 0x20 "CANVAS_SECOND_Y_ADJ,CANVAS_SECOND_Y_ADJ" hexmask.long.tbyte 0x20 10.--31. 1. "UNSIGNED_STRIDE,Stride" newline hexmask.long.byte 0x20 4.--7. 1. "START,Start" newline hexmask.long.byte 0x20 0.--3. 1. "COUNT,Count between adjustments" line.long 0x24 "CANVAS_PDS_POS,CANVAS Pad Data Supervisor Position" hexmask.long.word 0x24 12.--23. 1. "POS_X,POS_X" newline hexmask.long.word 0x24 0.--11. 1. "POS_Y,POS_Y" line.long 0x28 "CANVAS_PDS_PAD,CANVAS Pad Data Supervisor Padding" hexmask.long.byte 0x28 15.--19. 1. "PADR,PADR" newline hexmask.long.byte 0x28 10.--14. 1. "PADB,PADB" newline hexmask.long.byte 0x28 5.--9. 1. "PADL,PADL" newline hexmask.long.byte 0x28 0.--4. 1. "PADT,PADT" line.long 0x2C "CANVAS_PDS_STRIDES,CANVAS Pad Data Supervisor Strides" hexmask.long.byte 0x2C 26.--31. 1. "KernelW,KernelW" newline hexmask.long.byte 0x2C 20.--25. 1. "KernelH,KernelH" newline hexmask.long.byte 0x2C 15.--19. 1. "StrideW,StrideW" newline hexmask.long.byte 0x2C 10.--14. 1. "StrideH,StrideH" newline hexmask.long.byte 0x2C 5.--9. 1. "DilationW,DilationW" newline hexmask.long.byte 0x2C 0.--4. 1. "DilationH,DilationH" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD0)++0x3 line.long 0x0 "SCRATCH__1[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end group.long 0xE0++0x17 line.long 0x0 "ACTCTRL2,Activation Control" hexmask.long.word 0x0 20.--31. 1. "INTERPOLATOR_POST_SCALE,Interpolator post scale" newline bitfld.long 0x0 19. "INTERPOLATOR_UNSIGNED_SAT,Interpolator allow unsigned saturation (default is signed)" "0,1" newline bitfld.long 0x0 18. "INTERPOLATOR_POST_PROC,Interpolator use post processing" "0,1" newline bitfld.long 0x0 17. "INTERPOLATOR_BYTES,Interpolator Byte mode (default is 16bits)" "0,1" newline hexmask.long.byte 0x0 13.--16. 1. "INTERPOLATOR_BITS,Interpolator Bits for lookup in a table" newline bitfld.long 0x0 11.--12. "INTERPOLATE_ORDER,Interpolation Order" "0,1,2,3" newline bitfld.long 0x0 10. "HW_INTERPOLATE,Hardware Interpolator" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "UPPER_ACT_SCALE,Upper Activation scale" line.long 0x4 "INTERPOLBASE,Interpolator Base Address" hexmask.long 0x4 2.--31. 1. "ADDR,Interpolator base address value" line.long 0x8 "CANVAS_PDS_INP,CANVAS Pad Data Supervisor Input" hexmask.long.byte 0x8 24.--31. 1. "CinReads,CinReads" newline hexmask.long.word 0x8 12.--23. 1. "INP_W,INP_W" newline hexmask.long.word 0x8 0.--11. 1. "INP_H,INP_H" line.long 0xC "CANVAS_SECOND_X_ADJ,CANVAS_SECOND_X_ADJ" hexmask.long.tbyte 0xC 10.--31. 1. "SIGNED_STRIDE,Stride" newline hexmask.long.byte 0xC 4.--7. 1. "START,Start" newline hexmask.long.byte 0xC 0.--3. 1. "COUNT,Count between adjustments" line.long 0x10 "INTERPOLOFF,Interpolator offset" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Interpolator Offset" line.long 0x14 "ACTCTRL3,Activation scale" hexmask.long.word 0x14 0.--9. 1. "ACTCTRL3,Activation scale" group.long 0x100++0x3 line.long 0x0 "DATABASE,Base address for Data Canvas loading" hexmask.long 0x0 0.--31. 1. "BASE,Base Address for Data Canvas loading" group.long 0x180++0x3 line.long 0x0 "RESBASE,Result base address for pipeline" hexmask.long 0x0 0.--31. 1. "BASE,Result Base Address for pipeline 0" rgroup.long 0x3FC++0x3 line.long 0x0 "ID,Neutron ID Register" hexmask.long.byte 0x0 28.--31. 1. "ARCH,Arch Type" newline hexmask.long.word 0x0 16.--27. 1. "VERSION,Version ID" newline bitfld.long 0x0 10. "RESBUS,Separate Results Number" "0,1" newline bitfld.long 0x0 9. "POOLING,Pooling Presence" "0,1" newline bitfld.long 0x0 8. "CANVAS,Canvas Presence" "0,1" newline hexmask.long.byte 0x0 4.--7. 1. "PIPELINES,PIPELINES Number" newline hexmask.long.byte 0x0 0.--3. 1. "MACS,MACS Number" tree.end tree "NEUTRON1" base ad:0x4ABC1000 group.long 0x0++0x33 line.long 0x0 "CTRL,Control Register" rbitfld.long 0x0 31. "CTRL_SHADOW_BUSY,Control shadow busy" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "PIPELINE_ENABLE,Pipeline Start" line.long 0x4 "FORMAT,Format Register" bitfld.long 0x4 31. "COMPMULT,Use 1s complement weights" "0,1" newline bitfld.long 0x4 30. "VECTMULT,Use Vector Mult" "0,1" newline bitfld.long 0x4 27.--29. "ACTIVATION_MODE,Activation Mode" "0: None,1: reLU,2: Sigmoid,3: HSWISH,4: tanh,5: eLU,6: exp (for negative input range up to 0),7: leakyRELU" newline bitfld.long 0x4 26. "USE_SCALER,Use scaler" "0,1" newline bitfld.long 0x4 24. "USE_B,Use Bias" "0,1" newline bitfld.long 0x4 19. "SIGN_R,Signed Result" "0,1" newline bitfld.long 0x4 18. "SIGN_B,SIGNED BIAS" "0,1" newline bitfld.long 0x4 17. "SIGN_D,Signed Data" "0,1" newline bitfld.long 0x4 16. "SIGN_W,Signed Weights" "0,1" newline bitfld.long 0x4 15. "DONT_REARRANGEW,Use Weights" "0,1" newline bitfld.long 0x4 12.--13. "ACCDNSHIFT,Accumulation Downshift" "0: no pre-shift accumulator,1: downshift 4,2: downshift 8,3: downshift 12" newline bitfld.long 0x4 10. "SLOW16BIT,Slow 16bit mode" "0,1" newline bitfld.long 0x4 9. "INTRLVRES,Interleave Results" "0,1" newline bitfld.long 0x4 8. "SCALER_SIZE,Scaler size" "0: Represents 32-bit dequant factor,1: Represents 16-bit scaler or FP16 scaler format." newline bitfld.long 0x4 6.--7. "RSIZE,Size of Post-Scaler" "0,1,2,3" newline bitfld.long 0x4 4.--5. "BSIZE,Size Bias" "0,1,2,3" newline bitfld.long 0x4 2.--3. "DSIZE,Size Data" "0,1,2,3" newline bitfld.long 0x4 0.--1. "WSIZE,Size Weights" "0,1,2,3" line.long 0x8 "LENGTH,Lenght Register" hexmask.long.word 0x8 16.--31. 1. "DATA,Number of data (row length)" newline hexmask.long.word 0x8 0.--15. 1. "ROWS,Number of Matrix rows" line.long 0xC "WEIGHTBASE,Weight Base Register" hexmask.long 0xC 0.--31. 1. "BASE,Base address for Weights" line.long 0x10 "BIASBASE,Base address for Biases" hexmask.long 0x10 0.--31. 1. "BASE,Base address for Bases" line.long 0x14 "ARGMAXBASE,Base address for ARGMAX indices" hexmask.long 0x14 0.--31. 1. "BASE,Specifies base address for ARGMAX results." line.long 0x18 "SCALEBASE,Scale Base" hexmask.long 0x18 0.--31. 1. "BASE,Base address for Scalers" line.long 0x1C "ACTCTRL,Activation Control Register" hexmask.long.word 0x1C 16.--31. 1. "CLIPMIN,Clip min value" newline hexmask.long.word 0x1C 0.--15. 1. "CLIPMAX,Clip max value" line.long 0x20 "DEQUANT,Dequant Register" hexmask.long.word 0x20 16.--31. 1. "CMN_SCALER_VAL,Common Scale Value" newline hexmask.long.byte 0x20 8.--15. 1. "ACT_OFF,Activation Offset" newline bitfld.long 0x20 7. "USE_COMMON_DEQUANT,Use common dequant factor" "0,1" newline bitfld.long 0x20 6. "USE_FP16_BIAS,Dequantization using FP16 Bias" "0,1" newline hexmask.long.byte 0x20 0.--5. 1. "CMN_SHIFT,Common Shift factor" line.long 0x24 "BATCH,Batch Count Register" hexmask.long.word 0x24 0.--15. 1. "COUNT,Matrix by Column" line.long 0x28 "RESCTRL,Result Control Register" bitfld.long 0x28 31. "POOL_RESTART,Reset Pool" "0,1" newline bitfld.long 0x28 30. "POOL_ADDER,Vector Addition" "0,1" newline bitfld.long 0x28 29. "POOL_DEF0,Force Max Pool to Zero" "0,1" newline bitfld.long 0x28 28. "PARTIAL_RESTORE,Partial Restore" "0,1" newline bitfld.long 0x28 27. "PARTIAL_REUSE,Partial Reuse" "0,1" newline bitfld.long 0x28 26. "IGNORE_RESULTS,IGNORE RESULTS" "0,1" newline bitfld.long 0x28 25. "IGNORE_POOL,IGNORE POOL" "0,1" newline bitfld.long 0x28 24. "ARGMAX_BYTE,ARGMAX Byte" "0,1" newline bitfld.long 0x28 23. "ARGMAX_EN,Use this bit to enable ARGMAX function. ARGMAX results will be written out to the memory address specified by ARGMAXBASE register." "0,1" newline bitfld.long 0x28 19.--20. "POOL_DEPTH,Pooling Depth" "0,1,2,3" newline bitfld.long 0x28 16.--18. "POOLY_SIZE,Output max poolY" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x28 4.--15. 1. "POOLX_SIZE,Output max poolX" newline hexmask.long.byte 0x28 0.--3. 1. "PIPE_STRIDE,Skip unused pipelines" line.long 0x2C "RES_Y,Result Writer Config Y" hexmask.long.byte 0x2C 28.--31. 1. "COUNT,Y-count" newline hexmask.long 0x2C 0.--27. 1. "STRIDE,Y-Stride" line.long 0x30 "RES_X,Result Writer Config X" hexmask.long.word 0x30 16.--31. 1. "COUNT,X-count" newline hexmask.long.word 0x30 0.--15. 1. "STRIDE,X-Stride" group.long 0x3C++0x13 line.long 0x0 "FLUSH,Flush Register" bitfld.long 0x0 1. "BATCH,Each Batchs FLUSH execute" "0,1" newline bitfld.long 0x0 0. "JOB,All Batchs FLUSH execute" "0,1" line.long 0x4 "INTR,Interrupt Register" bitfld.long 0x4 6.--7. "EVENT_MODE,Event mode" "0,1,2,3" newline bitfld.long 0x4 4.--5. "MODE,Interrupt mode" "0: Interrupt on completion,1: Interrupt on job loaded,2: Interrupt when Neutron IDLE,3: Interrupt on ERROR" newline eventfld.long 0x4 3. "ERRORTRAP_R,Error Trap for RES Bus" "0,1" newline eventfld.long 0x4 2. "ERRORTRAP_M,Error Trap" "0,1" newline bitfld.long 0x4 1. "EVENTEN,Event Enable" "0,1" newline bitfld.long 0x4 0. "INTREN,Interrupt Enable" "0,1" line.long 0x8 "WEIGHTCTRL,Weight Control Register" bitfld.long 0x8 10. "USE_WEIGHT_COLUMN,Use weight column" "0,1" newline bitfld.long 0x8 9. "MULT_WT_DATA_NEG,Multiply data by weight if data is negative" "0,1" newline bitfld.long 0x8 8. "SQUARE_DATA,Square data" "0,1" newline bitfld.long 0x8 6. "WCTRL_MUL_BY_1_SELECTIVE,Selective multiply by 1 mode" "0,1" newline bitfld.long 0x8 5. "WCTRL_MUL_BY_1,No Weights Register" "0,1" newline bitfld.long 0x8 4. "WCTRL_USE_CODEBOOK,Codebook Register" "0,1" newline bitfld.long 0x8 1.--3. "WCTRL_MINI_W_SIZE,Mini Weight Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0. "WCTRL_USE_MINI_W,Mini Weights Enable" "0,1" line.long 0xC "CIRCADDR,Circular Address Register" hexmask.long.word 0xC 16.--31. 1. "RESMASK,Res circular address mask" newline hexmask.long.word 0xC 0.--15. 1. "DATMASK,Data circular address mask" line.long 0x10 "PROGSEQ,PROGSEQ" hexmask.long 0x10 2.--31. 1. "BASE,Location of Sequencer code" newline bitfld.long 0x10 0. "ENABLE,Enable Register loading Sequencer" "0,1" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x50)++0x3 line.long 0x0 "SCRATCH[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "CODEBOOK[$1],Codebook Register i" hexmask.long 0x0 0.--31. 1. "CODE,Codebook code" repeat.end group.long 0xA0++0x2F line.long 0x0 "CANVAS_SIZE,Canvas Size Register" bitfld.long 0x0 27.--29. "READ_HEIGHT,Read Height" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "LOAD_HEIGHT,Load Height" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 16.--23. 1. "PIPE_Y_CNT,Pipeline Y Count Config" newline hexmask.long.word 0x0 0.--15. 1. "XTOTAL,Canvas XTOTAL" line.long 0x4 "CANVAS_READ_CONV,Canvas Conv Register" bitfld.long 0x4 31. "STRIDE2EN,Stride 2 Enable" "0,1" newline hexmask.long.word 0x4 16.--30. 1. "STRIDE,Conv Stride" newline hexmask.long.word 0x4 0.--15. 1. "X_SIZE,Convolution X Size" line.long 0x8 "CANVAS_LOAD_PAD,Canvas Load Pad Register" hexmask.long.byte 0x8 24.--31. 1. "VAL,Pad Value" newline hexmask.long.word 0x8 8.--23. 1. "LEFT,Horizontal Padding" newline hexmask.long.byte 0x8 0.--5. 1. "TOP,Top Padding" line.long 0xC "CANVAS_LOAD_Y,Y Dimension Stride Register" hexmask.long.word 0xC 22.--31. 1. "COUNT,Word Reads Register" newline hexmask.long.tbyte 0xC 0.--21. 1. "INC,Y Stride" line.long 0x10 "CANVAS_LOAD_X,X Dimension Stride Register" hexmask.long.byte 0x10 20.--27. 1. "COUNT,Count" newline hexmask.long.tbyte 0x10 0.--19. 1. "STRIDE,Offset Register" line.long 0x14 "CANVAS_LOAD_BATCH,Canvas Load Batch Register" hexmask.long.tbyte 0x14 12.--31. 1. "INC,Canvas Batch Inc" newline hexmask.long.word 0x14 0.--11. 1. "COUNT,Canvas Batch Count" line.long 0x18 "CANVAS_LOAD_OUTER_BATCH,Canvas Load Outer Batch Register" hexmask.long.tbyte 0x18 12.--31. 1. "INC,Canvas Outer Batch Inc" newline hexmask.long.word 0x18 0.--11. 1. "COUNT,Canvas Outer Batch Count" line.long 0x1C "CANVAS_SECONDARY_READ,Canvas Secondary Read" bitfld.long 0x1C 19. "SEC_EN,Enable Secondary Setting" "0,1" newline hexmask.long.byte 0x1C 12.--18. 1. "SEC_Y_CFG,Secondary Pipeline Y Config" newline hexmask.long.byte 0x1C 8.--11. 1. "SEC_HEIGHT,Secondary Read Height" newline hexmask.long.byte 0x1C 0.--7. 1. "SEC_DATA,Data Consumed Value" line.long 0x20 "CANVAS_SECOND_Y_ADJ,CANVAS_SECOND_Y_ADJ" hexmask.long.tbyte 0x20 10.--31. 1. "UNSIGNED_STRIDE,Stride" newline hexmask.long.byte 0x20 4.--7. 1. "START,Start" newline hexmask.long.byte 0x20 0.--3. 1. "COUNT,Count between adjustments" line.long 0x24 "CANVAS_PDS_POS,CANVAS Pad Data Supervisor Position" hexmask.long.word 0x24 12.--23. 1. "POS_X,POS_X" newline hexmask.long.word 0x24 0.--11. 1. "POS_Y,POS_Y" line.long 0x28 "CANVAS_PDS_PAD,CANVAS Pad Data Supervisor Padding" hexmask.long.byte 0x28 15.--19. 1. "PADR,PADR" newline hexmask.long.byte 0x28 10.--14. 1. "PADB,PADB" newline hexmask.long.byte 0x28 5.--9. 1. "PADL,PADL" newline hexmask.long.byte 0x28 0.--4. 1. "PADT,PADT" line.long 0x2C "CANVAS_PDS_STRIDES,CANVAS Pad Data Supervisor Strides" hexmask.long.byte 0x2C 26.--31. 1. "KernelW,KernelW" newline hexmask.long.byte 0x2C 20.--25. 1. "KernelH,KernelH" newline hexmask.long.byte 0x2C 15.--19. 1. "StrideW,StrideW" newline hexmask.long.byte 0x2C 10.--14. 1. "StrideH,StrideH" newline hexmask.long.byte 0x2C 5.--9. 1. "DilationW,DilationW" newline hexmask.long.byte 0x2C 0.--4. 1. "DilationH,DilationH" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD0)++0x3 line.long 0x0 "SCRATCH__1[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end group.long 0xE0++0x17 line.long 0x0 "ACTCTRL2,Activation Control" hexmask.long.word 0x0 20.--31. 1. "INTERPOLATOR_POST_SCALE,Interpolator post scale" newline bitfld.long 0x0 19. "INTERPOLATOR_UNSIGNED_SAT,Interpolator allow unsigned saturation (default is signed)" "0,1" newline bitfld.long 0x0 18. "INTERPOLATOR_POST_PROC,Interpolator use post processing" "0,1" newline bitfld.long 0x0 17. "INTERPOLATOR_BYTES,Interpolator Byte mode (default is 16bits)" "0,1" newline hexmask.long.byte 0x0 13.--16. 1. "INTERPOLATOR_BITS,Interpolator Bits for lookup in a table" newline bitfld.long 0x0 11.--12. "INTERPOLATE_ORDER,Interpolation Order" "0,1,2,3" newline bitfld.long 0x0 10. "HW_INTERPOLATE,Hardware Interpolator" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "UPPER_ACT_SCALE,Upper Activation scale" line.long 0x4 "INTERPOLBASE,Interpolator Base Address" hexmask.long 0x4 2.--31. 1. "ADDR,Interpolator base address value" line.long 0x8 "CANVAS_PDS_INP,CANVAS Pad Data Supervisor Input" hexmask.long.byte 0x8 24.--31. 1. "CinReads,CinReads" newline hexmask.long.word 0x8 12.--23. 1. "INP_W,INP_W" newline hexmask.long.word 0x8 0.--11. 1. "INP_H,INP_H" line.long 0xC "CANVAS_SECOND_X_ADJ,CANVAS_SECOND_X_ADJ" hexmask.long.tbyte 0xC 10.--31. 1. "SIGNED_STRIDE,Stride" newline hexmask.long.byte 0xC 4.--7. 1. "START,Start" newline hexmask.long.byte 0xC 0.--3. 1. "COUNT,Count between adjustments" line.long 0x10 "INTERPOLOFF,Interpolator offset" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Interpolator Offset" line.long 0x14 "ACTCTRL3,Activation scale" hexmask.long.word 0x14 0.--9. 1. "ACTCTRL3,Activation scale" group.long 0x100++0x3 line.long 0x0 "DATABASE,Base address for Data Canvas loading" hexmask.long 0x0 0.--31. 1. "BASE,Base Address for Data Canvas loading" group.long 0x180++0x3 line.long 0x0 "RESBASE,Result base address for pipeline" hexmask.long 0x0 0.--31. 1. "BASE,Result Base Address for pipeline 0" rgroup.long 0x3FC++0x3 line.long 0x0 "ID,Neutron ID Register" hexmask.long.byte 0x0 28.--31. 1. "ARCH,Arch Type" newline hexmask.long.word 0x0 16.--27. 1. "VERSION,Version ID" newline bitfld.long 0x0 10. "RESBUS,Separate Results Number" "0,1" newline bitfld.long 0x0 9. "POOLING,Pooling Presence" "0,1" newline bitfld.long 0x0 8. "CANVAS,Canvas Presence" "0,1" newline hexmask.long.byte 0x0 4.--7. 1. "PIPELINES,PIPELINES Number" newline hexmask.long.byte 0x0 0.--3. 1. "MACS,MACS Number" tree.end tree "NEUTRON2" base ad:0x4ABC2000 group.long 0x0++0x33 line.long 0x0 "CTRL,Control Register" rbitfld.long 0x0 31. "CTRL_SHADOW_BUSY,Control shadow busy" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "PIPELINE_ENABLE,Pipeline Start" line.long 0x4 "FORMAT,Format Register" bitfld.long 0x4 31. "COMPMULT,Use 1s complement weights" "0,1" newline bitfld.long 0x4 30. "VECTMULT,Use Vector Mult" "0,1" newline bitfld.long 0x4 27.--29. "ACTIVATION_MODE,Activation Mode" "0: None,1: reLU,2: Sigmoid,3: HSWISH,4: tanh,5: eLU,6: exp (for negative input range up to 0),7: leakyRELU" newline bitfld.long 0x4 26. "USE_SCALER,Use scaler" "0,1" newline bitfld.long 0x4 24. "USE_B,Use Bias" "0,1" newline bitfld.long 0x4 19. "SIGN_R,Signed Result" "0,1" newline bitfld.long 0x4 18. "SIGN_B,SIGNED BIAS" "0,1" newline bitfld.long 0x4 17. "SIGN_D,Signed Data" "0,1" newline bitfld.long 0x4 16. "SIGN_W,Signed Weights" "0,1" newline bitfld.long 0x4 15. "DONT_REARRANGEW,Use Weights" "0,1" newline bitfld.long 0x4 12.--13. "ACCDNSHIFT,Accumulation Downshift" "0: no pre-shift accumulator,1: downshift 4,2: downshift 8,3: downshift 12" newline bitfld.long 0x4 10. "SLOW16BIT,Slow 16bit mode" "0,1" newline bitfld.long 0x4 9. "INTRLVRES,Interleave Results" "0,1" newline bitfld.long 0x4 8. "SCALER_SIZE,Scaler size" "0: Represents 32-bit dequant factor,1: Represents 16-bit scaler or FP16 scaler format." newline bitfld.long 0x4 6.--7. "RSIZE,Size of Post-Scaler" "0,1,2,3" newline bitfld.long 0x4 4.--5. "BSIZE,Size Bias" "0,1,2,3" newline bitfld.long 0x4 2.--3. "DSIZE,Size Data" "0,1,2,3" newline bitfld.long 0x4 0.--1. "WSIZE,Size Weights" "0,1,2,3" line.long 0x8 "LENGTH,Lenght Register" hexmask.long.word 0x8 16.--31. 1. "DATA,Number of data (row length)" newline hexmask.long.word 0x8 0.--15. 1. "ROWS,Number of Matrix rows" line.long 0xC "WEIGHTBASE,Weight Base Register" hexmask.long 0xC 0.--31. 1. "BASE,Base address for Weights" line.long 0x10 "BIASBASE,Base address for Biases" hexmask.long 0x10 0.--31. 1. "BASE,Base address for Bases" line.long 0x14 "ARGMAXBASE,Base address for ARGMAX indices" hexmask.long 0x14 0.--31. 1. "BASE,Specifies base address for ARGMAX results." line.long 0x18 "SCALEBASE,Scale Base" hexmask.long 0x18 0.--31. 1. "BASE,Base address for Scalers" line.long 0x1C "ACTCTRL,Activation Control Register" hexmask.long.word 0x1C 16.--31. 1. "CLIPMIN,Clip min value" newline hexmask.long.word 0x1C 0.--15. 1. "CLIPMAX,Clip max value" line.long 0x20 "DEQUANT,Dequant Register" hexmask.long.word 0x20 16.--31. 1. "CMN_SCALER_VAL,Common Scale Value" newline hexmask.long.byte 0x20 8.--15. 1. "ACT_OFF,Activation Offset" newline bitfld.long 0x20 7. "USE_COMMON_DEQUANT,Use common dequant factor" "0,1" newline bitfld.long 0x20 6. "USE_FP16_BIAS,Dequantization using FP16 Bias" "0,1" newline hexmask.long.byte 0x20 0.--5. 1. "CMN_SHIFT,Common Shift factor" line.long 0x24 "BATCH,Batch Count Register" hexmask.long.word 0x24 0.--15. 1. "COUNT,Matrix by Column" line.long 0x28 "RESCTRL,Result Control Register" bitfld.long 0x28 31. "POOL_RESTART,Reset Pool" "0,1" newline bitfld.long 0x28 30. "POOL_ADDER,Vector Addition" "0,1" newline bitfld.long 0x28 29. "POOL_DEF0,Force Max Pool to Zero" "0,1" newline bitfld.long 0x28 28. "PARTIAL_RESTORE,Partial Restore" "0,1" newline bitfld.long 0x28 27. "PARTIAL_REUSE,Partial Reuse" "0,1" newline bitfld.long 0x28 26. "IGNORE_RESULTS,IGNORE RESULTS" "0,1" newline bitfld.long 0x28 25. "IGNORE_POOL,IGNORE POOL" "0,1" newline bitfld.long 0x28 24. "ARGMAX_BYTE,ARGMAX Byte" "0,1" newline bitfld.long 0x28 23. "ARGMAX_EN,Use this bit to enable ARGMAX function. ARGMAX results will be written out to the memory address specified by ARGMAXBASE register." "0,1" newline bitfld.long 0x28 19.--20. "POOL_DEPTH,Pooling Depth" "0,1,2,3" newline bitfld.long 0x28 16.--18. "POOLY_SIZE,Output max poolY" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x28 4.--15. 1. "POOLX_SIZE,Output max poolX" newline hexmask.long.byte 0x28 0.--3. 1. "PIPE_STRIDE,Skip unused pipelines" line.long 0x2C "RES_Y,Result Writer Config Y" hexmask.long.byte 0x2C 28.--31. 1. "COUNT,Y-count" newline hexmask.long 0x2C 0.--27. 1. "STRIDE,Y-Stride" line.long 0x30 "RES_X,Result Writer Config X" hexmask.long.word 0x30 16.--31. 1. "COUNT,X-count" newline hexmask.long.word 0x30 0.--15. 1. "STRIDE,X-Stride" group.long 0x3C++0x13 line.long 0x0 "FLUSH,Flush Register" bitfld.long 0x0 1. "BATCH,Each Batchs FLUSH execute" "0,1" newline bitfld.long 0x0 0. "JOB,All Batchs FLUSH execute" "0,1" line.long 0x4 "INTR,Interrupt Register" bitfld.long 0x4 6.--7. "EVENT_MODE,Event mode" "0,1,2,3" newline bitfld.long 0x4 4.--5. "MODE,Interrupt mode" "0: Interrupt on completion,1: Interrupt on job loaded,2: Interrupt when Neutron IDLE,3: Interrupt on ERROR" newline eventfld.long 0x4 3. "ERRORTRAP_R,Error Trap for RES Bus" "0,1" newline eventfld.long 0x4 2. "ERRORTRAP_M,Error Trap" "0,1" newline bitfld.long 0x4 1. "EVENTEN,Event Enable" "0,1" newline bitfld.long 0x4 0. "INTREN,Interrupt Enable" "0,1" line.long 0x8 "WEIGHTCTRL,Weight Control Register" bitfld.long 0x8 10. "USE_WEIGHT_COLUMN,Use weight column" "0,1" newline bitfld.long 0x8 9. "MULT_WT_DATA_NEG,Multiply data by weight if data is negative" "0,1" newline bitfld.long 0x8 8. "SQUARE_DATA,Square data" "0,1" newline bitfld.long 0x8 6. "WCTRL_MUL_BY_1_SELECTIVE,Selective multiply by 1 mode" "0,1" newline bitfld.long 0x8 5. "WCTRL_MUL_BY_1,No Weights Register" "0,1" newline bitfld.long 0x8 4. "WCTRL_USE_CODEBOOK,Codebook Register" "0,1" newline bitfld.long 0x8 1.--3. "WCTRL_MINI_W_SIZE,Mini Weight Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0. "WCTRL_USE_MINI_W,Mini Weights Enable" "0,1" line.long 0xC "CIRCADDR,Circular Address Register" hexmask.long.word 0xC 16.--31. 1. "RESMASK,Res circular address mask" newline hexmask.long.word 0xC 0.--15. 1. "DATMASK,Data circular address mask" line.long 0x10 "PROGSEQ,PROGSEQ" hexmask.long 0x10 2.--31. 1. "BASE,Location of Sequencer code" newline bitfld.long 0x10 0. "ENABLE,Enable Register loading Sequencer" "0,1" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x50)++0x3 line.long 0x0 "SCRATCH[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "CODEBOOK[$1],Codebook Register i" hexmask.long 0x0 0.--31. 1. "CODE,Codebook code" repeat.end group.long 0xA0++0x2F line.long 0x0 "CANVAS_SIZE,Canvas Size Register" bitfld.long 0x0 27.--29. "READ_HEIGHT,Read Height" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "LOAD_HEIGHT,Load Height" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 16.--23. 1. "PIPE_Y_CNT,Pipeline Y Count Config" newline hexmask.long.word 0x0 0.--15. 1. "XTOTAL,Canvas XTOTAL" line.long 0x4 "CANVAS_READ_CONV,Canvas Conv Register" bitfld.long 0x4 31. "STRIDE2EN,Stride 2 Enable" "0,1" newline hexmask.long.word 0x4 16.--30. 1. "STRIDE,Conv Stride" newline hexmask.long.word 0x4 0.--15. 1. "X_SIZE,Convolution X Size" line.long 0x8 "CANVAS_LOAD_PAD,Canvas Load Pad Register" hexmask.long.byte 0x8 24.--31. 1. "VAL,Pad Value" newline hexmask.long.word 0x8 8.--23. 1. "LEFT,Horizontal Padding" newline hexmask.long.byte 0x8 0.--5. 1. "TOP,Top Padding" line.long 0xC "CANVAS_LOAD_Y,Y Dimension Stride Register" hexmask.long.word 0xC 22.--31. 1. "COUNT,Word Reads Register" newline hexmask.long.tbyte 0xC 0.--21. 1. "INC,Y Stride" line.long 0x10 "CANVAS_LOAD_X,X Dimension Stride Register" hexmask.long.byte 0x10 20.--27. 1. "COUNT,Count" newline hexmask.long.tbyte 0x10 0.--19. 1. "STRIDE,Offset Register" line.long 0x14 "CANVAS_LOAD_BATCH,Canvas Load Batch Register" hexmask.long.tbyte 0x14 12.--31. 1. "INC,Canvas Batch Inc" newline hexmask.long.word 0x14 0.--11. 1. "COUNT,Canvas Batch Count" line.long 0x18 "CANVAS_LOAD_OUTER_BATCH,Canvas Load Outer Batch Register" hexmask.long.tbyte 0x18 12.--31. 1. "INC,Canvas Outer Batch Inc" newline hexmask.long.word 0x18 0.--11. 1. "COUNT,Canvas Outer Batch Count" line.long 0x1C "CANVAS_SECONDARY_READ,Canvas Secondary Read" bitfld.long 0x1C 19. "SEC_EN,Enable Secondary Setting" "0,1" newline hexmask.long.byte 0x1C 12.--18. 1. "SEC_Y_CFG,Secondary Pipeline Y Config" newline hexmask.long.byte 0x1C 8.--11. 1. "SEC_HEIGHT,Secondary Read Height" newline hexmask.long.byte 0x1C 0.--7. 1. "SEC_DATA,Data Consumed Value" line.long 0x20 "CANVAS_SECOND_Y_ADJ,CANVAS_SECOND_Y_ADJ" hexmask.long.tbyte 0x20 10.--31. 1. "UNSIGNED_STRIDE,Stride" newline hexmask.long.byte 0x20 4.--7. 1. "START,Start" newline hexmask.long.byte 0x20 0.--3. 1. "COUNT,Count between adjustments" line.long 0x24 "CANVAS_PDS_POS,CANVAS Pad Data Supervisor Position" hexmask.long.word 0x24 12.--23. 1. "POS_X,POS_X" newline hexmask.long.word 0x24 0.--11. 1. "POS_Y,POS_Y" line.long 0x28 "CANVAS_PDS_PAD,CANVAS Pad Data Supervisor Padding" hexmask.long.byte 0x28 15.--19. 1. "PADR,PADR" newline hexmask.long.byte 0x28 10.--14. 1. "PADB,PADB" newline hexmask.long.byte 0x28 5.--9. 1. "PADL,PADL" newline hexmask.long.byte 0x28 0.--4. 1. "PADT,PADT" line.long 0x2C "CANVAS_PDS_STRIDES,CANVAS Pad Data Supervisor Strides" hexmask.long.byte 0x2C 26.--31. 1. "KernelW,KernelW" newline hexmask.long.byte 0x2C 20.--25. 1. "KernelH,KernelH" newline hexmask.long.byte 0x2C 15.--19. 1. "StrideW,StrideW" newline hexmask.long.byte 0x2C 10.--14. 1. "StrideH,StrideH" newline hexmask.long.byte 0x2C 5.--9. 1. "DilationW,DilationW" newline hexmask.long.byte 0x2C 0.--4. 1. "DilationH,DilationH" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD0)++0x3 line.long 0x0 "SCRATCH__1[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end group.long 0xE0++0x17 line.long 0x0 "ACTCTRL2,Activation Control" hexmask.long.word 0x0 20.--31. 1. "INTERPOLATOR_POST_SCALE,Interpolator post scale" newline bitfld.long 0x0 19. "INTERPOLATOR_UNSIGNED_SAT,Interpolator allow unsigned saturation (default is signed)" "0,1" newline bitfld.long 0x0 18. "INTERPOLATOR_POST_PROC,Interpolator use post processing" "0,1" newline bitfld.long 0x0 17. "INTERPOLATOR_BYTES,Interpolator Byte mode (default is 16bits)" "0,1" newline hexmask.long.byte 0x0 13.--16. 1. "INTERPOLATOR_BITS,Interpolator Bits for lookup in a table" newline bitfld.long 0x0 11.--12. "INTERPOLATE_ORDER,Interpolation Order" "0,1,2,3" newline bitfld.long 0x0 10. "HW_INTERPOLATE,Hardware Interpolator" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "UPPER_ACT_SCALE,Upper Activation scale" line.long 0x4 "INTERPOLBASE,Interpolator Base Address" hexmask.long 0x4 2.--31. 1. "ADDR,Interpolator base address value" line.long 0x8 "CANVAS_PDS_INP,CANVAS Pad Data Supervisor Input" hexmask.long.byte 0x8 24.--31. 1. "CinReads,CinReads" newline hexmask.long.word 0x8 12.--23. 1. "INP_W,INP_W" newline hexmask.long.word 0x8 0.--11. 1. "INP_H,INP_H" line.long 0xC "CANVAS_SECOND_X_ADJ,CANVAS_SECOND_X_ADJ" hexmask.long.tbyte 0xC 10.--31. 1. "SIGNED_STRIDE,Stride" newline hexmask.long.byte 0xC 4.--7. 1. "START,Start" newline hexmask.long.byte 0xC 0.--3. 1. "COUNT,Count between adjustments" line.long 0x10 "INTERPOLOFF,Interpolator offset" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Interpolator Offset" line.long 0x14 "ACTCTRL3,Activation scale" hexmask.long.word 0x14 0.--9. 1. "ACTCTRL3,Activation scale" group.long 0x100++0x3 line.long 0x0 "DATABASE,Base address for Data Canvas loading" hexmask.long 0x0 0.--31. 1. "BASE,Base Address for Data Canvas loading" group.long 0x180++0x3 line.long 0x0 "RESBASE,Result base address for pipeline" hexmask.long 0x0 0.--31. 1. "BASE,Result Base Address for pipeline 0" rgroup.long 0x3FC++0x3 line.long 0x0 "ID,Neutron ID Register" hexmask.long.byte 0x0 28.--31. 1. "ARCH,Arch Type" newline hexmask.long.word 0x0 16.--27. 1. "VERSION,Version ID" newline bitfld.long 0x0 10. "RESBUS,Separate Results Number" "0,1" newline bitfld.long 0x0 9. "POOLING,Pooling Presence" "0,1" newline bitfld.long 0x0 8. "CANVAS,Canvas Presence" "0,1" newline hexmask.long.byte 0x0 4.--7. 1. "PIPELINES,PIPELINES Number" newline hexmask.long.byte 0x0 0.--3. 1. "MACS,MACS Number" tree.end tree "NEUTRON3" base ad:0x4ABC3000 group.long 0x0++0x33 line.long 0x0 "CTRL,Control Register" rbitfld.long 0x0 31. "CTRL_SHADOW_BUSY,Control shadow busy" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "PIPELINE_ENABLE,Pipeline Start" line.long 0x4 "FORMAT,Format Register" bitfld.long 0x4 31. "COMPMULT,Use 1s complement weights" "0,1" newline bitfld.long 0x4 30. "VECTMULT,Use Vector Mult" "0,1" newline bitfld.long 0x4 27.--29. "ACTIVATION_MODE,Activation Mode" "0: None,1: reLU,2: Sigmoid,3: HSWISH,4: tanh,5: eLU,6: exp (for negative input range up to 0),7: leakyRELU" newline bitfld.long 0x4 26. "USE_SCALER,Use scaler" "0,1" newline bitfld.long 0x4 24. "USE_B,Use Bias" "0,1" newline bitfld.long 0x4 19. "SIGN_R,Signed Result" "0,1" newline bitfld.long 0x4 18. "SIGN_B,SIGNED BIAS" "0,1" newline bitfld.long 0x4 17. "SIGN_D,Signed Data" "0,1" newline bitfld.long 0x4 16. "SIGN_W,Signed Weights" "0,1" newline bitfld.long 0x4 15. "DONT_REARRANGEW,Use Weights" "0,1" newline bitfld.long 0x4 12.--13. "ACCDNSHIFT,Accumulation Downshift" "0: no pre-shift accumulator,1: downshift 4,2: downshift 8,3: downshift 12" newline bitfld.long 0x4 10. "SLOW16BIT,Slow 16bit mode" "0,1" newline bitfld.long 0x4 9. "INTRLVRES,Interleave Results" "0,1" newline bitfld.long 0x4 8. "SCALER_SIZE,Scaler size" "0: Represents 32-bit dequant factor,1: Represents 16-bit scaler or FP16 scaler format." newline bitfld.long 0x4 6.--7. "RSIZE,Size of Post-Scaler" "0,1,2,3" newline bitfld.long 0x4 4.--5. "BSIZE,Size Bias" "0,1,2,3" newline bitfld.long 0x4 2.--3. "DSIZE,Size Data" "0,1,2,3" newline bitfld.long 0x4 0.--1. "WSIZE,Size Weights" "0,1,2,3" line.long 0x8 "LENGTH,Lenght Register" hexmask.long.word 0x8 16.--31. 1. "DATA,Number of data (row length)" newline hexmask.long.word 0x8 0.--15. 1. "ROWS,Number of Matrix rows" line.long 0xC "WEIGHTBASE,Weight Base Register" hexmask.long 0xC 0.--31. 1. "BASE,Base address for Weights" line.long 0x10 "BIASBASE,Base address for Biases" hexmask.long 0x10 0.--31. 1. "BASE,Base address for Bases" line.long 0x14 "ARGMAXBASE,Base address for ARGMAX indices" hexmask.long 0x14 0.--31. 1. "BASE,Specifies base address for ARGMAX results." line.long 0x18 "SCALEBASE,Scale Base" hexmask.long 0x18 0.--31. 1. "BASE,Base address for Scalers" line.long 0x1C "ACTCTRL,Activation Control Register" hexmask.long.word 0x1C 16.--31. 1. "CLIPMIN,Clip min value" newline hexmask.long.word 0x1C 0.--15. 1. "CLIPMAX,Clip max value" line.long 0x20 "DEQUANT,Dequant Register" hexmask.long.word 0x20 16.--31. 1. "CMN_SCALER_VAL,Common Scale Value" newline hexmask.long.byte 0x20 8.--15. 1. "ACT_OFF,Activation Offset" newline bitfld.long 0x20 7. "USE_COMMON_DEQUANT,Use common dequant factor" "0,1" newline bitfld.long 0x20 6. "USE_FP16_BIAS,Dequantization using FP16 Bias" "0,1" newline hexmask.long.byte 0x20 0.--5. 1. "CMN_SHIFT,Common Shift factor" line.long 0x24 "BATCH,Batch Count Register" hexmask.long.word 0x24 0.--15. 1. "COUNT,Matrix by Column" line.long 0x28 "RESCTRL,Result Control Register" bitfld.long 0x28 31. "POOL_RESTART,Reset Pool" "0,1" newline bitfld.long 0x28 30. "POOL_ADDER,Vector Addition" "0,1" newline bitfld.long 0x28 29. "POOL_DEF0,Force Max Pool to Zero" "0,1" newline bitfld.long 0x28 28. "PARTIAL_RESTORE,Partial Restore" "0,1" newline bitfld.long 0x28 27. "PARTIAL_REUSE,Partial Reuse" "0,1" newline bitfld.long 0x28 26. "IGNORE_RESULTS,IGNORE RESULTS" "0,1" newline bitfld.long 0x28 25. "IGNORE_POOL,IGNORE POOL" "0,1" newline bitfld.long 0x28 24. "ARGMAX_BYTE,ARGMAX Byte" "0,1" newline bitfld.long 0x28 23. "ARGMAX_EN,Use this bit to enable ARGMAX function. ARGMAX results will be written out to the memory address specified by ARGMAXBASE register." "0,1" newline bitfld.long 0x28 19.--20. "POOL_DEPTH,Pooling Depth" "0,1,2,3" newline bitfld.long 0x28 16.--18. "POOLY_SIZE,Output max poolY" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x28 4.--15. 1. "POOLX_SIZE,Output max poolX" newline hexmask.long.byte 0x28 0.--3. 1. "PIPE_STRIDE,Skip unused pipelines" line.long 0x2C "RES_Y,Result Writer Config Y" hexmask.long.byte 0x2C 28.--31. 1. "COUNT,Y-count" newline hexmask.long 0x2C 0.--27. 1. "STRIDE,Y-Stride" line.long 0x30 "RES_X,Result Writer Config X" hexmask.long.word 0x30 16.--31. 1. "COUNT,X-count" newline hexmask.long.word 0x30 0.--15. 1. "STRIDE,X-Stride" group.long 0x3C++0x13 line.long 0x0 "FLUSH,Flush Register" bitfld.long 0x0 1. "BATCH,Each Batchs FLUSH execute" "0,1" newline bitfld.long 0x0 0. "JOB,All Batchs FLUSH execute" "0,1" line.long 0x4 "INTR,Interrupt Register" bitfld.long 0x4 6.--7. "EVENT_MODE,Event mode" "0,1,2,3" newline bitfld.long 0x4 4.--5. "MODE,Interrupt mode" "0: Interrupt on completion,1: Interrupt on job loaded,2: Interrupt when Neutron IDLE,3: Interrupt on ERROR" newline eventfld.long 0x4 3. "ERRORTRAP_R,Error Trap for RES Bus" "0,1" newline eventfld.long 0x4 2. "ERRORTRAP_M,Error Trap" "0,1" newline bitfld.long 0x4 1. "EVENTEN,Event Enable" "0,1" newline bitfld.long 0x4 0. "INTREN,Interrupt Enable" "0,1" line.long 0x8 "WEIGHTCTRL,Weight Control Register" bitfld.long 0x8 10. "USE_WEIGHT_COLUMN,Use weight column" "0,1" newline bitfld.long 0x8 9. "MULT_WT_DATA_NEG,Multiply data by weight if data is negative" "0,1" newline bitfld.long 0x8 8. "SQUARE_DATA,Square data" "0,1" newline bitfld.long 0x8 6. "WCTRL_MUL_BY_1_SELECTIVE,Selective multiply by 1 mode" "0,1" newline bitfld.long 0x8 5. "WCTRL_MUL_BY_1,No Weights Register" "0,1" newline bitfld.long 0x8 4. "WCTRL_USE_CODEBOOK,Codebook Register" "0,1" newline bitfld.long 0x8 1.--3. "WCTRL_MINI_W_SIZE,Mini Weight Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0. "WCTRL_USE_MINI_W,Mini Weights Enable" "0,1" line.long 0xC "CIRCADDR,Circular Address Register" hexmask.long.word 0xC 16.--31. 1. "RESMASK,Res circular address mask" newline hexmask.long.word 0xC 0.--15. 1. "DATMASK,Data circular address mask" line.long 0x10 "PROGSEQ,PROGSEQ" hexmask.long 0x10 2.--31. 1. "BASE,Location of Sequencer code" newline bitfld.long 0x10 0. "ENABLE,Enable Register loading Sequencer" "0,1" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x50)++0x3 line.long 0x0 "SCRATCH[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "CODEBOOK[$1],Codebook Register i" hexmask.long 0x0 0.--31. 1. "CODE,Codebook code" repeat.end group.long 0xA0++0x2F line.long 0x0 "CANVAS_SIZE,Canvas Size Register" bitfld.long 0x0 27.--29. "READ_HEIGHT,Read Height" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "LOAD_HEIGHT,Load Height" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 16.--23. 1. "PIPE_Y_CNT,Pipeline Y Count Config" newline hexmask.long.word 0x0 0.--15. 1. "XTOTAL,Canvas XTOTAL" line.long 0x4 "CANVAS_READ_CONV,Canvas Conv Register" bitfld.long 0x4 31. "STRIDE2EN,Stride 2 Enable" "0,1" newline hexmask.long.word 0x4 16.--30. 1. "STRIDE,Conv Stride" newline hexmask.long.word 0x4 0.--15. 1. "X_SIZE,Convolution X Size" line.long 0x8 "CANVAS_LOAD_PAD,Canvas Load Pad Register" hexmask.long.byte 0x8 24.--31. 1. "VAL,Pad Value" newline hexmask.long.word 0x8 8.--23. 1. "LEFT,Horizontal Padding" newline hexmask.long.byte 0x8 0.--5. 1. "TOP,Top Padding" line.long 0xC "CANVAS_LOAD_Y,Y Dimension Stride Register" hexmask.long.word 0xC 22.--31. 1. "COUNT,Word Reads Register" newline hexmask.long.tbyte 0xC 0.--21. 1. "INC,Y Stride" line.long 0x10 "CANVAS_LOAD_X,X Dimension Stride Register" hexmask.long.byte 0x10 20.--27. 1. "COUNT,Count" newline hexmask.long.tbyte 0x10 0.--19. 1. "STRIDE,Offset Register" line.long 0x14 "CANVAS_LOAD_BATCH,Canvas Load Batch Register" hexmask.long.tbyte 0x14 12.--31. 1. "INC,Canvas Batch Inc" newline hexmask.long.word 0x14 0.--11. 1. "COUNT,Canvas Batch Count" line.long 0x18 "CANVAS_LOAD_OUTER_BATCH,Canvas Load Outer Batch Register" hexmask.long.tbyte 0x18 12.--31. 1. "INC,Canvas Outer Batch Inc" newline hexmask.long.word 0x18 0.--11. 1. "COUNT,Canvas Outer Batch Count" line.long 0x1C "CANVAS_SECONDARY_READ,Canvas Secondary Read" bitfld.long 0x1C 19. "SEC_EN,Enable Secondary Setting" "0,1" newline hexmask.long.byte 0x1C 12.--18. 1. "SEC_Y_CFG,Secondary Pipeline Y Config" newline hexmask.long.byte 0x1C 8.--11. 1. "SEC_HEIGHT,Secondary Read Height" newline hexmask.long.byte 0x1C 0.--7. 1. "SEC_DATA,Data Consumed Value" line.long 0x20 "CANVAS_SECOND_Y_ADJ,CANVAS_SECOND_Y_ADJ" hexmask.long.tbyte 0x20 10.--31. 1. "UNSIGNED_STRIDE,Stride" newline hexmask.long.byte 0x20 4.--7. 1. "START,Start" newline hexmask.long.byte 0x20 0.--3. 1. "COUNT,Count between adjustments" line.long 0x24 "CANVAS_PDS_POS,CANVAS Pad Data Supervisor Position" hexmask.long.word 0x24 12.--23. 1. "POS_X,POS_X" newline hexmask.long.word 0x24 0.--11. 1. "POS_Y,POS_Y" line.long 0x28 "CANVAS_PDS_PAD,CANVAS Pad Data Supervisor Padding" hexmask.long.byte 0x28 15.--19. 1. "PADR,PADR" newline hexmask.long.byte 0x28 10.--14. 1. "PADB,PADB" newline hexmask.long.byte 0x28 5.--9. 1. "PADL,PADL" newline hexmask.long.byte 0x28 0.--4. 1. "PADT,PADT" line.long 0x2C "CANVAS_PDS_STRIDES,CANVAS Pad Data Supervisor Strides" hexmask.long.byte 0x2C 26.--31. 1. "KernelW,KernelW" newline hexmask.long.byte 0x2C 20.--25. 1. "KernelH,KernelH" newline hexmask.long.byte 0x2C 15.--19. 1. "StrideW,StrideW" newline hexmask.long.byte 0x2C 10.--14. 1. "StrideH,StrideH" newline hexmask.long.byte 0x2C 5.--9. 1. "DilationW,DilationW" newline hexmask.long.byte 0x2C 0.--4. 1. "DilationH,DilationH" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD0)++0x3 line.long 0x0 "SCRATCH__1[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end group.long 0xE0++0x17 line.long 0x0 "ACTCTRL2,Activation Control" hexmask.long.word 0x0 20.--31. 1. "INTERPOLATOR_POST_SCALE,Interpolator post scale" newline bitfld.long 0x0 19. "INTERPOLATOR_UNSIGNED_SAT,Interpolator allow unsigned saturation (default is signed)" "0,1" newline bitfld.long 0x0 18. "INTERPOLATOR_POST_PROC,Interpolator use post processing" "0,1" newline bitfld.long 0x0 17. "INTERPOLATOR_BYTES,Interpolator Byte mode (default is 16bits)" "0,1" newline hexmask.long.byte 0x0 13.--16. 1. "INTERPOLATOR_BITS,Interpolator Bits for lookup in a table" newline bitfld.long 0x0 11.--12. "INTERPOLATE_ORDER,Interpolation Order" "0,1,2,3" newline bitfld.long 0x0 10. "HW_INTERPOLATE,Hardware Interpolator" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "UPPER_ACT_SCALE,Upper Activation scale" line.long 0x4 "INTERPOLBASE,Interpolator Base Address" hexmask.long 0x4 2.--31. 1. "ADDR,Interpolator base address value" line.long 0x8 "CANVAS_PDS_INP,CANVAS Pad Data Supervisor Input" hexmask.long.byte 0x8 24.--31. 1. "CinReads,CinReads" newline hexmask.long.word 0x8 12.--23. 1. "INP_W,INP_W" newline hexmask.long.word 0x8 0.--11. 1. "INP_H,INP_H" line.long 0xC "CANVAS_SECOND_X_ADJ,CANVAS_SECOND_X_ADJ" hexmask.long.tbyte 0xC 10.--31. 1. "SIGNED_STRIDE,Stride" newline hexmask.long.byte 0xC 4.--7. 1. "START,Start" newline hexmask.long.byte 0xC 0.--3. 1. "COUNT,Count between adjustments" line.long 0x10 "INTERPOLOFF,Interpolator offset" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Interpolator Offset" line.long 0x14 "ACTCTRL3,Activation scale" hexmask.long.word 0x14 0.--9. 1. "ACTCTRL3,Activation scale" group.long 0x100++0x3 line.long 0x0 "DATABASE,Base address for Data Canvas loading" hexmask.long 0x0 0.--31. 1. "BASE,Base Address for Data Canvas loading" group.long 0x180++0x3 line.long 0x0 "RESBASE,Result base address for pipeline" hexmask.long 0x0 0.--31. 1. "BASE,Result Base Address for pipeline 0" rgroup.long 0x3FC++0x3 line.long 0x0 "ID,Neutron ID Register" hexmask.long.byte 0x0 28.--31. 1. "ARCH,Arch Type" newline hexmask.long.word 0x0 16.--27. 1. "VERSION,Version ID" newline bitfld.long 0x0 10. "RESBUS,Separate Results Number" "0,1" newline bitfld.long 0x0 9. "POOLING,Pooling Presence" "0,1" newline bitfld.long 0x0 8. "CANVAS,Canvas Presence" "0,1" newline hexmask.long.byte 0x0 4.--7. 1. "PIPELINES,PIPELINES Number" newline hexmask.long.byte 0x0 0.--3. 1. "MACS,MACS Number" tree.end tree "NEUTRON_GANGED" base ad:0x4ABC4000 group.long 0x0++0x33 line.long 0x0 "CTRL,Control Register" rbitfld.long 0x0 31. "CTRL_SHADOW_BUSY,Control shadow busy" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "PIPELINE_ENABLE,Pipeline Start" line.long 0x4 "FORMAT,Format Register" bitfld.long 0x4 31. "COMPMULT,Use 1s complement weights" "0,1" newline bitfld.long 0x4 30. "VECTMULT,Use Vector Mult" "0,1" newline bitfld.long 0x4 27.--29. "ACTIVATION_MODE,Activation Mode" "0: None,1: reLU,2: Sigmoid,3: HSWISH,4: tanh,5: eLU,6: exp (for negative input range up to 0),7: leakyRELU" newline bitfld.long 0x4 26. "USE_SCALER,Use scaler" "0,1" newline bitfld.long 0x4 24. "USE_B,Use Bias" "0,1" newline bitfld.long 0x4 19. "SIGN_R,Signed Result" "0,1" newline bitfld.long 0x4 18. "SIGN_B,SIGNED BIAS" "0,1" newline bitfld.long 0x4 17. "SIGN_D,Signed Data" "0,1" newline bitfld.long 0x4 16. "SIGN_W,Signed Weights" "0,1" newline bitfld.long 0x4 15. "DONT_REARRANGEW,Use Weights" "0,1" newline bitfld.long 0x4 12.--13. "ACCDNSHIFT,Accumulation Downshift" "0: no pre-shift accumulator,1: downshift 4,2: downshift 8,3: downshift 12" newline bitfld.long 0x4 10. "SLOW16BIT,Slow 16bit mode" "0,1" newline bitfld.long 0x4 9. "INTRLVRES,Interleave Results" "0,1" newline bitfld.long 0x4 8. "SCALER_SIZE,Scaler size" "0: Represents 32-bit dequant factor,1: Represents 16-bit scaler or FP16 scaler format." newline bitfld.long 0x4 6.--7. "RSIZE,Size of Post-Scaler" "0,1,2,3" newline bitfld.long 0x4 4.--5. "BSIZE,Size Bias" "0,1,2,3" newline bitfld.long 0x4 2.--3. "DSIZE,Size Data" "0,1,2,3" newline bitfld.long 0x4 0.--1. "WSIZE,Size Weights" "0,1,2,3" line.long 0x8 "LENGTH,Lenght Register" hexmask.long.word 0x8 16.--31. 1. "DATA,Number of data (row length)" newline hexmask.long.word 0x8 0.--15. 1. "ROWS,Number of Matrix rows" line.long 0xC "WEIGHTBASE,Weight Base Register" hexmask.long 0xC 0.--31. 1. "BASE,Base address for Weights" line.long 0x10 "BIASBASE,Base address for Biases" hexmask.long 0x10 0.--31. 1. "BASE,Base address for Bases" line.long 0x14 "ARGMAXBASE,Base address for ARGMAX indices" hexmask.long 0x14 0.--31. 1. "BASE,Specifies base address for ARGMAX results." line.long 0x18 "SCALEBASE,Scale Base" hexmask.long 0x18 0.--31. 1. "BASE,Base address for Scalers" line.long 0x1C "ACTCTRL,Activation Control Register" hexmask.long.word 0x1C 16.--31. 1. "CLIPMIN,Clip min value" newline hexmask.long.word 0x1C 0.--15. 1. "CLIPMAX,Clip max value" line.long 0x20 "DEQUANT,Dequant Register" hexmask.long.word 0x20 16.--31. 1. "CMN_SCALER_VAL,Common Scale Value" newline hexmask.long.byte 0x20 8.--15. 1. "ACT_OFF,Activation Offset" newline bitfld.long 0x20 7. "USE_COMMON_DEQUANT,Use common dequant factor" "0,1" newline bitfld.long 0x20 6. "USE_FP16_BIAS,Dequantization using FP16 Bias" "0,1" newline hexmask.long.byte 0x20 0.--5. 1. "CMN_SHIFT,Common Shift factor" line.long 0x24 "BATCH,Batch Count Register" hexmask.long.word 0x24 0.--15. 1. "COUNT,Matrix by Column" line.long 0x28 "RESCTRL,Result Control Register" bitfld.long 0x28 31. "POOL_RESTART,Reset Pool" "0,1" newline bitfld.long 0x28 30. "POOL_ADDER,Vector Addition" "0,1" newline bitfld.long 0x28 29. "POOL_DEF0,Force Max Pool to Zero" "0,1" newline bitfld.long 0x28 28. "PARTIAL_RESTORE,Partial Restore" "0,1" newline bitfld.long 0x28 27. "PARTIAL_REUSE,Partial Reuse" "0,1" newline bitfld.long 0x28 26. "IGNORE_RESULTS,IGNORE RESULTS" "0,1" newline bitfld.long 0x28 25. "IGNORE_POOL,IGNORE POOL" "0,1" newline bitfld.long 0x28 24. "ARGMAX_BYTE,ARGMAX Byte" "0,1" newline bitfld.long 0x28 23. "ARGMAX_EN,Use this bit to enable ARGMAX function. ARGMAX results will be written out to the memory address specified by ARGMAXBASE register." "0,1" newline bitfld.long 0x28 19.--20. "POOL_DEPTH,Pooling Depth" "0,1,2,3" newline bitfld.long 0x28 16.--18. "POOLY_SIZE,Output max poolY" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x28 4.--15. 1. "POOLX_SIZE,Output max poolX" newline hexmask.long.byte 0x28 0.--3. 1. "PIPE_STRIDE,Skip unused pipelines" line.long 0x2C "RES_Y,Result Writer Config Y" hexmask.long.byte 0x2C 28.--31. 1. "COUNT,Y-count" newline hexmask.long 0x2C 0.--27. 1. "STRIDE,Y-Stride" line.long 0x30 "RES_X,Result Writer Config X" hexmask.long.word 0x30 16.--31. 1. "COUNT,X-count" newline hexmask.long.word 0x30 0.--15. 1. "STRIDE,X-Stride" group.long 0x3C++0x13 line.long 0x0 "FLUSH,Flush Register" bitfld.long 0x0 1. "BATCH,Each Batchs FLUSH execute" "0,1" newline bitfld.long 0x0 0. "JOB,All Batchs FLUSH execute" "0,1" line.long 0x4 "INTR,Interrupt Register" bitfld.long 0x4 6.--7. "EVENT_MODE,Event mode" "0,1,2,3" newline bitfld.long 0x4 4.--5. "MODE,Interrupt mode" "0: Interrupt on completion,1: Interrupt on job loaded,2: Interrupt when Neutron IDLE,3: Interrupt on ERROR" newline eventfld.long 0x4 3. "ERRORTRAP_R,Error Trap for RES Bus" "0,1" newline eventfld.long 0x4 2. "ERRORTRAP_M,Error Trap" "0,1" newline bitfld.long 0x4 1. "EVENTEN,Event Enable" "0,1" newline bitfld.long 0x4 0. "INTREN,Interrupt Enable" "0,1" line.long 0x8 "WEIGHTCTRL,Weight Control Register" bitfld.long 0x8 10. "USE_WEIGHT_COLUMN,Use weight column" "0,1" newline bitfld.long 0x8 9. "MULT_WT_DATA_NEG,Multiply data by weight if data is negative" "0,1" newline bitfld.long 0x8 8. "SQUARE_DATA,Square data" "0,1" newline bitfld.long 0x8 6. "WCTRL_MUL_BY_1_SELECTIVE,Selective multiply by 1 mode" "0,1" newline bitfld.long 0x8 5. "WCTRL_MUL_BY_1,No Weights Register" "0,1" newline bitfld.long 0x8 4. "WCTRL_USE_CODEBOOK,Codebook Register" "0,1" newline bitfld.long 0x8 1.--3. "WCTRL_MINI_W_SIZE,Mini Weight Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x8 0. "WCTRL_USE_MINI_W,Mini Weights Enable" "0,1" line.long 0xC "CIRCADDR,Circular Address Register" hexmask.long.word 0xC 16.--31. 1. "RESMASK,Res circular address mask" newline hexmask.long.word 0xC 0.--15. 1. "DATMASK,Data circular address mask" line.long 0x10 "PROGSEQ,PROGSEQ" hexmask.long 0x10 2.--31. 1. "BASE,Location of Sequencer code" newline bitfld.long 0x10 0. "ENABLE,Enable Register loading Sequencer" "0,1" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x50)++0x3 line.long 0x0 "SCRATCH[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "CODEBOOK[$1],Codebook Register i" hexmask.long 0x0 0.--31. 1. "CODE,Codebook code" repeat.end group.long 0xA0++0x2F line.long 0x0 "CANVAS_SIZE,Canvas Size Register" bitfld.long 0x0 27.--29. "READ_HEIGHT,Read Height" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "LOAD_HEIGHT,Load Height" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 16.--23. 1. "PIPE_Y_CNT,Pipeline Y Count Config" newline hexmask.long.word 0x0 0.--15. 1. "XTOTAL,Canvas XTOTAL" line.long 0x4 "CANVAS_READ_CONV,Canvas Conv Register" bitfld.long 0x4 31. "STRIDE2EN,Stride 2 Enable" "0,1" newline hexmask.long.word 0x4 16.--30. 1. "STRIDE,Conv Stride" newline hexmask.long.word 0x4 0.--15. 1. "X_SIZE,Convolution X Size" line.long 0x8 "CANVAS_LOAD_PAD,Canvas Load Pad Register" hexmask.long.byte 0x8 24.--31. 1. "VAL,Pad Value" newline hexmask.long.word 0x8 8.--23. 1. "LEFT,Horizontal Padding" newline hexmask.long.byte 0x8 0.--5. 1. "TOP,Top Padding" line.long 0xC "CANVAS_LOAD_Y,Y Dimension Stride Register" hexmask.long.word 0xC 22.--31. 1. "COUNT,Word Reads Register" newline hexmask.long.tbyte 0xC 0.--21. 1. "INC,Y Stride" line.long 0x10 "CANVAS_LOAD_X,X Dimension Stride Register" hexmask.long.byte 0x10 20.--27. 1. "COUNT,Count" newline hexmask.long.tbyte 0x10 0.--19. 1. "STRIDE,Offset Register" line.long 0x14 "CANVAS_LOAD_BATCH,Canvas Load Batch Register" hexmask.long.tbyte 0x14 12.--31. 1. "INC,Canvas Batch Inc" newline hexmask.long.word 0x14 0.--11. 1. "COUNT,Canvas Batch Count" line.long 0x18 "CANVAS_LOAD_OUTER_BATCH,Canvas Load Outer Batch Register" hexmask.long.tbyte 0x18 12.--31. 1. "INC,Canvas Outer Batch Inc" newline hexmask.long.word 0x18 0.--11. 1. "COUNT,Canvas Outer Batch Count" line.long 0x1C "CANVAS_SECONDARY_READ,Canvas Secondary Read" bitfld.long 0x1C 19. "SEC_EN,Enable Secondary Setting" "0,1" newline hexmask.long.byte 0x1C 12.--18. 1. "SEC_Y_CFG,Secondary Pipeline Y Config" newline hexmask.long.byte 0x1C 8.--11. 1. "SEC_HEIGHT,Secondary Read Height" newline hexmask.long.byte 0x1C 0.--7. 1. "SEC_DATA,Data Consumed Value" line.long 0x20 "CANVAS_SECOND_Y_ADJ,CANVAS_SECOND_Y_ADJ" hexmask.long.tbyte 0x20 10.--31. 1. "UNSIGNED_STRIDE,Stride" newline hexmask.long.byte 0x20 4.--7. 1. "START,Start" newline hexmask.long.byte 0x20 0.--3. 1. "COUNT,Count between adjustments" line.long 0x24 "CANVAS_PDS_POS,CANVAS Pad Data Supervisor Position" hexmask.long.word 0x24 12.--23. 1. "POS_X,POS_X" newline hexmask.long.word 0x24 0.--11. 1. "POS_Y,POS_Y" line.long 0x28 "CANVAS_PDS_PAD,CANVAS Pad Data Supervisor Padding" hexmask.long.byte 0x28 15.--19. 1. "PADR,PADR" newline hexmask.long.byte 0x28 10.--14. 1. "PADB,PADB" newline hexmask.long.byte 0x28 5.--9. 1. "PADL,PADL" newline hexmask.long.byte 0x28 0.--4. 1. "PADT,PADT" line.long 0x2C "CANVAS_PDS_STRIDES,CANVAS Pad Data Supervisor Strides" hexmask.long.byte 0x2C 26.--31. 1. "KernelW,KernelW" newline hexmask.long.byte 0x2C 20.--25. 1. "KernelH,KernelH" newline hexmask.long.byte 0x2C 15.--19. 1. "StrideW,StrideW" newline hexmask.long.byte 0x2C 10.--14. 1. "StrideH,StrideH" newline hexmask.long.byte 0x2C 5.--9. 1. "DilationW,DilationW" newline hexmask.long.byte 0x2C 0.--4. 1. "DilationH,DilationH" repeat 3. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xD0)++0x3 line.long 0x0 "SCRATCH__1[$1],Scratch Register i" hexmask.long 0x0 0.--31. 1. "SCR,Scratch Register" repeat.end group.long 0xE0++0x17 line.long 0x0 "ACTCTRL2,Activation Control" hexmask.long.word 0x0 20.--31. 1. "INTERPOLATOR_POST_SCALE,Interpolator post scale" newline bitfld.long 0x0 19. "INTERPOLATOR_UNSIGNED_SAT,Interpolator allow unsigned saturation (default is signed)" "0,1" newline bitfld.long 0x0 18. "INTERPOLATOR_POST_PROC,Interpolator use post processing" "0,1" newline bitfld.long 0x0 17. "INTERPOLATOR_BYTES,Interpolator Byte mode (default is 16bits)" "0,1" newline hexmask.long.byte 0x0 13.--16. 1. "INTERPOLATOR_BITS,Interpolator Bits for lookup in a table" newline bitfld.long 0x0 11.--12. "INTERPOLATE_ORDER,Interpolation Order" "0,1,2,3" newline bitfld.long 0x0 10. "HW_INTERPOLATE,Hardware Interpolator" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "UPPER_ACT_SCALE,Upper Activation scale" line.long 0x4 "INTERPOLBASE,Interpolator Base Address" hexmask.long 0x4 2.--31. 1. "ADDR,Interpolator base address value" line.long 0x8 "CANVAS_PDS_INP,CANVAS Pad Data Supervisor Input" hexmask.long.byte 0x8 24.--31. 1. "CinReads,CinReads" newline hexmask.long.word 0x8 12.--23. 1. "INP_W,INP_W" newline hexmask.long.word 0x8 0.--11. 1. "INP_H,INP_H" line.long 0xC "CANVAS_SECOND_X_ADJ,CANVAS_SECOND_X_ADJ" hexmask.long.tbyte 0xC 10.--31. 1. "SIGNED_STRIDE,Stride" newline hexmask.long.byte 0xC 4.--7. 1. "START,Start" newline hexmask.long.byte 0xC 0.--3. 1. "COUNT,Count between adjustments" line.long 0x10 "INTERPOLOFF,Interpolator offset" hexmask.long.word 0x10 0.--15. 1. "OFFSET,Interpolator Offset" line.long 0x14 "ACTCTRL3,Activation scale" hexmask.long.word 0x14 0.--9. 1. "ACTCTRL3,Activation scale" group.long 0x100++0x3 line.long 0x0 "DATABASE,Base address for Data Canvas loading" hexmask.long 0x0 0.--31. 1. "BASE,Base Address for Data Canvas loading" group.long 0x180++0x3 line.long 0x0 "RESBASE,Result base address for pipeline" hexmask.long 0x0 0.--31. 1. "BASE,Result Base Address for pipeline 0" rgroup.long 0x3FC++0x3 line.long 0x0 "ID,Neutron ID Register" hexmask.long.byte 0x0 28.--31. 1. "ARCH,Arch Type" newline hexmask.long.word 0x0 16.--27. 1. "VERSION,Version ID" newline bitfld.long 0x0 10. "RESBUS,Separate Results Number" "0,1" newline bitfld.long 0x0 9. "POOLING,Pooling Presence" "0,1" newline bitfld.long 0x0 8. "CANVAS,Canvas Presence" "0,1" newline hexmask.long.byte 0x0 4.--7. 1. "PIPELINES,PIPELINES Number" newline hexmask.long.byte 0x0 0.--3. 1. "MACS,MACS Number" tree.end tree.end tree "NEUTRON_S" tree "MMR_SOC" base ad:0x100000 group.long 0x0++0x37 line.long 0x0 "RESETCTRL,Reset and Control register" hexmask.long.byte 0x0 16.--19. 1. "NGANGDIS,NGANGDIS" bitfld.long 0x0 12. "ZMEMFREE,ZMEMFREE" "0: If 0 the ITCM and DTCM will be unavailable when..,1: If 1 the ITCM and DTCM will be available.." newline hexmask.long.byte 0x0 8.--11. 1. "MEMENA,MEMENA" hexmask.long.byte 0x0 4.--7. 1. "NRUN,NRUN" newline bitfld.long 0x0 1.--3. "OCMCNT,OCMCNT" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0. "ZVRUN,ZVRUN" "0: If Zen-V is held in reset,1: If running" line.long 0x4 "STATUSERR,Zen-V Status and Error register" eventfld.long 0x4 28. "OCMECCFATAL,OCMECCFATAL" "0,1" hexmask.long.byte 0x4 20.--27. 1. "OCMECCCORR,OCMECCCORR" newline eventfld.long 0x4 18. "DECOMPERR,DECOMPERR" "0,1" hexmask.long.byte 0x4 9.--16. 1. "REQCONTID,REQCONTID" newline eventfld.long 0x4 8. "REQCONT,REQCONT" "0,1" eventfld.long 0x4 6. "NDAERR,NDAERR" "0,1" newline eventfld.long 0x4 5. "NWAERR,NWAERR" "0,1" eventfld.long 0x4 4. "NRAERR,NRAERR" "0,1" newline rbitfld.long 0x4 1. "ZVFAULT,Zen-V core fault" "0,1" rbitfld.long 0x4 0. "ZVHALT,Zen-V core HALT" "0,1" line.long 0x8 "INTENA,Interrupt enabling for SoC register" bitfld.long 0x8 20. "ZVFAULT,ZVFAULT" "0,1" bitfld.long 0x8 19. "OCMECCFATAL,OCMECCFATAL" "0,1" newline bitfld.long 0x8 18. "OCMECCSAT,OCMECCSAT" "0,1" bitfld.long 0x8 17. "REQCONT,REQCONT" "0,1" newline bitfld.long 0x8 16. "AERR,AERR" "0,1" bitfld.long 0x8 7. "SHUTDOWN,SHUTDOWN" "0,1" newline bitfld.long 0x8 2. "MBOX,MBOX" "0,1" bitfld.long 0x8 1. "INFDONE,INFDONE" "0,1" newline bitfld.long 0x8 0. "ZVHALT,ZVHALT" "0,1" line.long 0xC "INTCLR,Interrupt clear for SoC register" bitfld.long 0xC 20. "ZVFAULT,ZVFAULT" "0,1" bitfld.long 0xC 19. "OCMECCFATAL,OCMECCFATAL" "0,1" newline bitfld.long 0xC 18. "OCMECCSAT,OCMECCSAT" "0,1" bitfld.long 0xC 17. "REQCONT,REQCONT" "0,1" newline bitfld.long 0xC 16. "AERR,AERR" "0,1" bitfld.long 0xC 7. "SHUTDOWN,SHUTDOWN" "0,1" newline bitfld.long 0xC 2. "MBOX,MBOX" "0,1" bitfld.long 0xC 1. "INFDONE,INFDONE" "0,1" newline bitfld.long 0xC 0. "ZVHALT,ZVHALT" "0,1" line.long 0x10 "CYCLOW,Cycle counter register" hexmask.long 0x10 0.--31. 1. "CNT_LOW,CNT_LOW" line.long 0x14 "CYCHIGH,Cycle counter register" hexmask.long 0x14 0.--31. 1. "CNT_HIGH,CNT_HIGH" line.long 0x18 "DDRLATENT,DDR Latency performance counter register" hexmask.long 0x18 0.--31. 1. "CNT,CNT" line.long 0x1C "DDRSPREAD,DDR Data read spread perf counter register" hexmask.long 0x1C 0.--31. 1. "CNT,CNT" line.long 0x20 "DDRRCNTS,DDR read performance counter register" hexmask.long 0x20 0.--31. 1. "CNT_DDRR,CNT_DDRR" line.long 0x24 "DDRWWORDS,DDR write performance counter register" hexmask.long 0x24 0.--31. 1. "CNT,Count" line.long 0x28 "DDRRWORDS,DDR read word performance counter register" hexmask.long 0x28 0.--31. 1. "CNT,CNT" line.long 0x2C "DDRSTALL,DDR stall perf counter register" hexmask.long.word 0x2C 16.--31. 1. "WSTALLS,WSTALLS" hexmask.long.word 0x2C 0.--15. 1. "REQSTALLS,REQSTALLS" line.long 0x30 "NSTALL,Neutron stall perf counter register" hexmask.long.word 0x30 16.--31. 1. "WSTALLS,WSTALLS" hexmask.long.word 0x30 0.--15. 1. "DSTALLS,DSTALLS" line.long 0x34 "NACT,Neutron active perf counter register" hexmask.long 0x34 0.--31. 1. "CNT,CNT" group.long 0x60++0xF line.long 0x0 "ZVIV2P0,Zen-V Code Virtual to Physical register" hexmask.long.byte 0x0 24.--31. 1. "MATCH3,MATCH2" hexmask.long.byte 0x0 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0x0 8.--15. 1. "MATCH1,MATCH1" bitfld.long 0x0 3. "DATA3,DATA3" "0,1" newline bitfld.long 0x0 2. "DATA2,DATA2" "0,1" bitfld.long 0x0 1. "DATA1,DATA1" "0,1" newline rbitfld.long 0x0 0. "ERROR,ERROR" "0,1" line.long 0x4 "ZVIV2P1,Zen-V Code Virtual to Physical register" hexmask.long.byte 0x4 24.--31. 1. "MATCH3,MATCH3" hexmask.long.byte 0x4 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0x4 8.--15. 1. "MATCH1,MATCH1" hexmask.long.byte 0x4 0.--7. 1. "MATCH0,MATCH0" line.long 0x8 "ZVIV2P2,Zen-V Code Virtual to Physical register" hexmask.long.byte 0x8 24.--31. 1. "MATCH3,MATCH3" hexmask.long.byte 0x8 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0x8 8.--15. 1. "MATCH1,MATCH1" hexmask.long.byte 0x8 0.--7. 1. "MATCH0,MATCH0" line.long 0xC "ZVIV2P3,Zen-V Code Virtual to Physical register" hexmask.long.byte 0xC 24.--31. 1. "MATCH3,MATCH3" hexmask.long.byte 0xC 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0xC 8.--15. 1. "MATCH1,MATCH1" hexmask.long.byte 0xC 0.--7. 1. "MATCH0,MATCH0" group.long 0x80++0x13 line.long 0x0 "TTCTRL,TCM-TCM Control" hexmask.long.word 0x0 22.--31. 1. "ITER,ITER" hexmask.long.word 0x0 8.--21. 1. "SIZE,SIZE" newline hexmask.long.byte 0x0 0.--7. 1. "STRIDE,STRIDE" line.long 0x4 "TTSADDR,TCM-TCM Source address" hexmask.long 0x4 0.--31. 1. "ADDR,ADDR" line.long 0x8 "TTDADDR,TCM-TCM Destination address" hexmask.long 0x8 0.--31. 1. "ADDR,ADDR" line.long 0xC "TTCTRL2,TCM-TCM Control2" hexmask.long.byte 0xC 24.--31. 1. "PAD,PAD" bitfld.long 0xC 22.--23. "MODE,MODE" "0: Normal Slice (src_stride),1: Destination stride (using {pad src_stride}),2: Inject padding (using src_stride),?" newline hexmask.long.tbyte 0xC 0.--18. 1. "DSTLEN,DSTLEN" line.long 0x10 "CONFIG,Configuration register" bitfld.long 0x10 19. "WWFIENA,WWFIENA" "0,1" bitfld.long 0x10 18. "PWFIENA,PWFIENA" "0,1" newline bitfld.long 0x10 17. "FWFIENA,FWFIENA" "0,1" bitfld.long 0x10 16. "TTWFIENA,TTWFIENA" "0,1" newline eventfld.long 0x10 12. "EINT,EINT" "0,1" eventfld.long 0x10 11. "WINT,WINT" "0,1" newline eventfld.long 0x10 10. "PINT,Push channel interrupt status" "0,1" eventfld.long 0x10 9. "FINT,Fetch channel interrupt status" "0,1" newline eventfld.long 0x10 8. "TTINT,TCM-TCM channel interrupt status" "0,1" bitfld.long 0x10 7. "RELEASE,Zen-V Release" "0,1" newline bitfld.long 0x10 4. "ERRENA,Enable error interrupt" "0,1" bitfld.long 0x10 3. "WINTENA,Enable weight channel interrupt" "0,1" newline bitfld.long 0x10 2. "PINTENA,Enable push channel interrupt" "0,1" bitfld.long 0x10 1. "FINTENA,Enable fetch channel interrupt" "0,1" newline bitfld.long 0x10 0. "TTINTENA,Enable TCM-TCM channel interrupt" "0,1" rgroup.long 0x94++0x3 line.long 0x0 "STATUS,Data mover status register" bitfld.long 0x0 20. "DECOMPERR,DECOMPERR" "0,1" bitfld.long 0x0 19. "XWRSTALL,XWRSTALL" "0,1" newline bitfld.long 0x0 18. "XRDSTALL,XRDSTALL" "0,1" bitfld.long 0x0 17. "LWRSTALL,LWRSTALL" "0,1" newline bitfld.long 0x0 16. "LRDSTALL,LRDSTALL" "0,1" bitfld.long 0x0 15. "XERR,DERRS" "0,1" newline bitfld.long 0x0 13. "WERRS,DERRS" "0,1" bitfld.long 0x0 12. "WERRD,DERRS" "0,1" newline hexmask.long.byte 0x0 8.--11. 1. "DERRS,DERRS" hexmask.long.byte 0x0 4.--7. 1. "DERRD,DERRD" newline bitfld.long 0x0 1. "TTERRS,TTERRS" "0,1" bitfld.long 0x0 0. "TTERRD,TTERRD" "0,1" group.long 0x98++0xB line.long 0x0 "DFORDER,Fetch order manager" bitfld.long 0x0 24.--26. "ADD,ADD" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 16.--18. "LIST3,LIST3" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x0 12.--14. "LIST2,LIST2" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 8.--10. "LIST1,LIST1" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x0 4.--6. "LIST0,LIST0" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 2. "STALL,STALL" "0,1" newline rbitfld.long 0x0 0.--1. "INDEX,INDEX" "0,1,2,3" line.long 0x4 "DPORDER,Push order manager" bitfld.long 0x4 24.--26. "ADD,ADD" "0,1,2,3,4,5,6,7" rbitfld.long 0x4 16.--18. "LIST3,LIST3" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x4 12.--14. "LIST2,LIST2" "0,1,2,3,4,5,6,7" rbitfld.long 0x4 8.--10. "LIST1,LIST1" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x4 4.--6. "LIST0,LIST0" "0,1,2,3,4,5,6,7" rbitfld.long 0x4 2. "STALL,STALL" "0,1" newline rbitfld.long 0x4 0.--1. "INDEX,INDEX" "0,1,2,3" line.long 0x8 "DCTRL0_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x8 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x8 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x8 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x8 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x8 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x8 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xA0++0x7 line.long 0x0 "DCTRL0_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DCTRL1_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x4 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x4 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x4 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x4 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x4 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x4 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xA4++0x7 line.long 0x0 "DCTRL1_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DCTRL2_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x4 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x4 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x4 4.--19. 1. "DESTLEN0,DESTLEN0" bitfld.long 0x4 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x4 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x4 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xA8++0x7 line.long 0x0 "DCTRL2_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DCTRL3_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x4 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x4 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x4 4.--19. 1. "DESTLEN0,DESTLEN0" bitfld.long 0x4 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x4 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x4 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xAC++0x3F line.long 0x0 "DCTRL3_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DSADDR0,Push and Fetch Source Address regs" hexmask.long 0x4 0.--31. 1. "DSADDR0,DSADDR0" line.long 0x8 "DSADDR1,Push and Fetch Source Address regs" hexmask.long 0x8 0.--31. 1. "DSADDR1,DSADDR1" line.long 0xC "DSADDR2,Push and Fetch Source Address regs" hexmask.long 0xC 0.--31. 1. "DSADDR2,DSADDR2" line.long 0x10 "DSADDR3,Push and Fetch Source Address regs" hexmask.long 0x10 0.--31. 1. "DSADDR3,DSADDR3" line.long 0x14 "DDADDR0,Push and Fetch Destination Address regs" hexmask.long 0x14 0.--31. 1. "DDADDR0,DDADDR0" line.long 0x18 "DDADDR1,Push and Fetch Destination Address regs" hexmask.long 0x18 0.--31. 1. "DDADDR1,DDADDR1" line.long 0x1C "DDADDR2,Push and Fetch Destination Address regs" hexmask.long 0x1C 0.--31. 1. "DDADDR2,DDADDR2" line.long 0x20 "DDADDR3,Push and Fetch Destination Address regs" hexmask.long 0x20 0.--31. 1. "DDADDR3,DDADDR3" line.long 0x24 "DCTRL2_0,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x24 20.--31. 1. "ITER,ITER" hexmask.long.word 0x24 0.--13. 1. "SRCLEN,SRCLEN" line.long 0x28 "DCTRL2_1,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x28 20.--31. 1. "ITER1,ITER1" hexmask.long.word 0x28 0.--13. 1. "SRCLEN1,SRCLEN1" line.long 0x2C "DCTRL2_2,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x2C 22.--31. 1. "ITER2,ITER2" hexmask.long.word 0x2C 0.--13. 1. "SRCLEN2,SRCLEN2" line.long 0x30 "DCTRL2_3,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x30 22.--31. 1. "ITER3,ITER3" hexmask.long.word 0x30 0.--13. 1. "SRCLEN3,SRCLEN3" line.long 0x34 "WCTRL,Weight Fetch Control reg" hexmask.long.word 0x34 4.--19. 1. "LEN,LEN" rbitfld.long 0x34 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x34 0.--1. "MODE,MODE" "?,1: Activate,?,3: Clears all pend-ready bits (see WPENDx)." line.long 0x38 "WSADDR,Weight Fetch Source Address reg" hexmask.long 0x38 4.--31. 1. "ADDR,ADDR" line.long 0x3C "WDADDR,Weight Fetch Destination Address" hexmask.long 0x3C 4.--31. 1. "ADDR,ADDR" group.long 0xF0++0x7 line.long 0x0 "DCTRL3_0,Fetch unpack 3rd control register" hexmask.long.word 0x0 16.--31. 1. "DSTSTRIDE,DSTSTRIDE" hexmask.long.word 0x0 0.--15. 1. "SRCSTRIDE,SRCSTRIDE" line.long 0x4 "DCTRL3_1,Fetch unpack 3rd control register" hexmask.long.word 0x4 16.--31. 1. "DSTSTRIDE,DSTSTRIDE" hexmask.long.word 0x4 0.--15. 1. "SRCSTRIDE,SRCSTRIDE" wgroup.long 0xF8++0x7 line.long 0x0 "WPEND1,Weight Pend/Ready set regs" hexmask.long.word 0x0 16.--31. 1. "WPEND1_ZONE1,WPEND1_ZONE0" hexmask.long.word 0x0 0.--15. 1. "WPEND1_ZONE0,WPEND1_ZONE0" line.long 0x4 "WPEND2,Weight Pend/Ready set regs" hexmask.long.word 0x4 16.--31. 1. "WPEND2_ZONE3,WPEND1_ZONE0" hexmask.long.word 0x4 0.--15. 1. "WPEND2_ZONE2,WPEND1_ZONE0" group.long 0x200++0x3 line.long 0x0 "APPCTRL_SOC,Application Control register" hexmask.long.byte 0x0 24.--31. 1. "MBSOCWR,MBSOCWR" hexmask.long.byte 0x0 16.--23. 1. "MBZVWR,MBZVWR" newline rbitfld.long 0x0 10. "INTMBOXENA2,INTMBOXENA" "0,1" rbitfld.long 0x0 9. "INTDONEENA2,INTDONEENA" "0,1" newline bitfld.long 0x0 8. "RINGSTALL,RINGSTALL" "0,1" bitfld.long 0x0 5. "RESDONE,RESDONE" "0,1" newline bitfld.long 0x0 4. "IMGPONG,IMGPONG" "0,1" bitfld.long 0x0 2. "SYS_SHUTDOWN,SYS_SHUTDOWN" "0,1" newline bitfld.long 0x0 1. "INFHALT,INFHALT" "0,1" bitfld.long 0x0 0. "INFCONT,INFCONT" "0,1" group.long 0x200++0x27 line.long 0x0 "APPCTRL_ZV,Application Control register" hexmask.long.byte 0x0 24.--31. 1. "MBSOCWR,MBSOCWR" hexmask.long.byte 0x0 16.--23. 1. "MBZVWR,MBZVWR" newline bitfld.long 0x0 10. "INTMBOXENA1,INTMBOXENA" "0,1" bitfld.long 0x0 9. "INTDONEENA1,INTDONEENA" "0,1" newline bitfld.long 0x0 8. "RINGSTALL,RINGSTALL" "0,1" eventfld.long 0x0 5. "RESDONE,RESDONE" "0,1" newline eventfld.long 0x0 4. "IMGPONG,IMGPONG" "0,1" bitfld.long 0x0 2. "SYS_SHUTDOWN,SYS_SHUTDOWN" "0,1" newline eventfld.long 0x0 1. "INFHALT,INFHALT" "0,1" eventfld.long 0x0 0. "INFCONT,INFCONT" "0,1" line.long 0x4 "APPSTATUS,Messages to SoC by Zen-V App using W1S" eventfld.long 0x4 4. "MBOX,MBOX" "0,1" eventfld.long 0x4 3. "INFOUTHALF,INFOUTHALF" "0,1" newline eventfld.long 0x4 2. "INFBUFFHALF,INFBUFFHALF" "0,1" eventfld.long 0x4 1. "INFHALTED,INFHALTED" "0,1" newline eventfld.long 0x4 0. "INFDONE,INFDONE" "0,1" line.long 0x8 "BASEDDRL,Base physical address in DDR" hexmask.long.word 0x8 20.--31. 1. "BASEDDRL,BASEDDRL" hexmask.long.word 0x8 8.--16. 1. "LIMITMB,LIMITMB" newline rbitfld.long 0x8 0. "SPLITPRIV,SPLITPRIV" "0,1" line.long 0xC "BASEDDRH,Base physical address in DDR" rbitfld.long 0xC 17. "BASEDDRH_2,BASEDDRH" "0,1" hexmask.long.tbyte 0xC 0.--16. 1. "BASEDDRH_1,BASEDDRH" line.long 0x10 "INPUT,Offset of Input image from DDR Base" rbitfld.long 0x10 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x10 4.--25. 1. "INPUT,INPUT" line.long 0x14 "INPUT2,Offset of Input image from DDR Base" rbitfld.long 0x14 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x14 4.--25. 1. "INPUT2,INPUT2" line.long 0x18 "OUTPUT,Offset of Output results from DDR Base" rbitfld.long 0x18 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x18 4.--25. 1. "OUTPUT,OUTPUT" line.long 0x1C "OUTPUT2,Offset of Output results from DDR Base" rbitfld.long 0x1C 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x1C 4.--25. 1. "OUTPUT2,OUTPUT2" line.long 0x20 "CODEOFF,Offset of Zen-V code from BASEDDRn" hexmask.long.tbyte 0x20 4.--26. 1. "CODEOFF,CODEOFF" line.long 0x24 "DATAOFF,Offset of Zen-V data from BASEDDRn" hexmask.long.tbyte 0x24 4.--26. 1. "DATAOFF,DATAOFF" group.long 0x230++0x3 line.long 0x0 "RINGCTRL,Ring buffer control by Zen-V" hexmask.long.word 0x0 8.--16. 1. "RINGADDR,RINGADDR" hexmask.long.byte 0x0 0.--7. 1. "RINGSZ,RINGSZ" group.long 0x238++0x7 line.long 0x0 "TAIL,Tail of ring buffer written by Zen-V" hexmask.long.word 0x0 0.--15. 1. "TAIL,TAIL" line.long 0x4 "HEAD,Head of ring buffer written by SoC" hexmask.long.word 0x4 0.--15. 1. "HEAD,HEAD" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x240)++0x3 line.long 0x0 "MBOX[$1],Mailboxes for SoC/Zen-V comms" hexmask.long 0x0 0.--31. 1. "MBOX,MBOX" repeat.end group.long 0x280++0xF line.long 0x0 "BASEINOUTL,Base physical address for Input/Output fetch/push" hexmask.long.word 0x0 20.--31. 1. "BASEINOUTL,BASESPILLL" hexmask.long.word 0x0 8.--16. 1. "LIMITMB,LIMITMB" line.long 0x4 "BASEINOUTH,Base physical address for Spill fetch/push" bitfld.long 0x4 17. "BASEINOUTH_2,BASEINOUTH" "0,1" hexmask.long.tbyte 0x4 0.--16. 1. "BASEINOUTH_1,BASEINOUTH" line.long 0x8 "BASESPILLL,Base physical address for Spill fetch/push" hexmask.long.word 0x8 20.--31. 1. "BASESPILLL,BASESPILLL" hexmask.long.word 0x8 8.--16. 1. "LIMITMB,LIMITMB" newline rbitfld.long 0x8 0. "SPLITPRIV,SPLITPRIV" "0,1" line.long 0xC "BASESPILLH,Base physical address for Spill fetch/push" hexmask.long.tbyte 0xC 0.--17. 1. "BASESPILLH,BASESPILLH" group.long 0x300++0xB line.long 0x0 "DECOMPCTRL,Control for Weight Decompressor" bitfld.long 0x0 8. "NEW_GROUP,NEW_GROUP" "0,1" bitfld.long 0x0 4.--5. "NEW_META,NEW_META" "0,1,2,3" newline bitfld.long 0x0 1. "BYPASS,BYPASS" "0,1" bitfld.long 0x0 0. "ENABLE,ENABLE" "0,1" line.long 0x4 "DECOMPSTAT,state for Weight Decompressor" eventfld.long 0x4 5. "ERR_UNDER,ERR_UNDER" "0,1" eventfld.long 0x4 4. "ERR_OVER,ERR_OVER" "0,1" newline eventfld.long 0x4 3. "ERR_BUS,ERR_BUS" "0,1" eventfld.long 0x4 2. "ERR_DECOMP,ERR_DECOMP" "0,1" newline rbitfld.long 0x4 1. "ACTIVE,ACTIVE" "0,1" rbitfld.long 0x4 0. "DONE,DONE" "0,1" line.long 0x8 "GROUP_BASE,DDR offset from base for Weight Decompressor" hexmask.long.tbyte 0x8 4.--26. 1. "OFFSET,OFFSET" group.long 0x310++0x3 line.long 0x0 "GROUP_LEN,Length in bytes of current Decompressor Group in External memory" hexmask.long.word 0x0 4.--17. 1. "LEN,LEN" group.long 0x340++0x1B line.long 0x0 "CRYPTO,Control for Cryptographic protection of models by SoC security" bitfld.long 0x0 9. "ZERORAM,ZERORAM" "0,1" bitfld.long 0x0 8. "CRYPTOMODEL,CRYPTOMODEL" "0,1" newline bitfld.long 0x0 2. "PCLOCK,PCLOCK" "0,1" bitfld.long 0x0 1. "DBGLOCK,DBGLOCK" "0,1" newline bitfld.long 0x0 0. "CRYPTOLOCK,CRYPTOLOCK" "0,1" line.long 0x4 "PRIVDDRL,Physical address in DDR of model when secure" hexmask.long.word 0x4 20.--31. 1. "PRIVDDRL,PRIVDDRL" hexmask.long.word 0x4 8.--16. 1. "LIMITMB,LIMITMB" newline rbitfld.long 0x4 0. "SPLITPRIV,SPLITPRIV" "0,1" line.long 0x8 "PRIVDDRH,Physical address in DDR of model when secure" rbitfld.long 0x8 17. "BASEDDRH2,BASEDDRH" "0,1" hexmask.long.tbyte 0x8 0.--16. 1. "BASEDDRH1,BASEDDRH" line.long 0xC "SESSIONIV,Unique IV for Protected models" hexmask.long 0xC 0.--31. 1. "NONCE,NONCE" line.long 0x10 "INFCOUNT,Infocount" hexmask.long 0x10 0.--31. 1. "COUNT,COUNT" line.long 0x14 "FLAYERNUM,Layer number for Fetch" hexmask.long.word 0x14 0.--15. 1. "NUM,NUM" line.long 0x18 "PLAYERNUM,Layer number for Push" hexmask.long.word 0x18 0.--15. 1. "NUM,NUM" group.long 0x360++0x3 line.long 0x0 "AXIOPT,Boot SoC setting for AXI optimization" hexmask.long.byte 0x0 28.--31. 1. "RRDCNT,ARTRIG" hexmask.long.byte 0x0 16.--23. 1. "ARTRIG,ARTRIG" newline hexmask.long.byte 0x0 8.--15. 1. "AWLEN,AWLEN" hexmask.long.byte 0x0 0.--7. 1. "ARLEN,ARLEN" group.long 0x400++0xBF line.long 0x0 "V2P_DATA0,Virtual to Physical registers" bitfld.long 0x0 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x0 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x0 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x0 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x0 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x0 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x0 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x0 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x4 "V2P_DATA1,Virtual to Physical registers" bitfld.long 0x4 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x4 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x4 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x4 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x4 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x4 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x4 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x4 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x8 "V2P_DATA2,Virtual to Physical registers" bitfld.long 0x8 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x8 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x8 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x8 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x8 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x8 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x8 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x8 0.--5. 1. "D_VMAP0,VMAP0" line.long 0xC "V2P_DATA3,Virtual to Physical registers" bitfld.long 0xC 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xC 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0xC 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xC 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0xC 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xC 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0xC 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xC 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x10 "V2P_DATA4,Virtual to Physical registers" bitfld.long 0x10 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x10 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x10 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x10 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x10 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x10 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x10 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x10 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x14 "V2P_DATA5,Virtual to Physical registers" bitfld.long 0x14 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x14 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x14 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x14 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x14 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x14 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x14 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x14 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x18 "V2P_DATA6,Virtual to Physical registers" bitfld.long 0x18 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x18 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x18 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x18 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x18 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x18 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x18 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x18 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x1C "V2P_DATA7,Virtual to Physical registers" bitfld.long 0x1C 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x1C 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x1C 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x1C 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x1C 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x1C 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x1C 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x1C 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x20 "V2P_DATA8,Virtual to Physical registers" bitfld.long 0x20 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x20 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x20 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x20 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x20 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x20 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x20 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x20 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x24 "V2P_DATA9,Virtual to Physical registers" bitfld.long 0x24 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x24 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x24 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x24 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x24 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x24 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x24 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x24 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x28 "V2P_DATA10,Virtual to Physical registers" bitfld.long 0x28 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x28 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x28 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x28 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x28 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x28 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x28 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x28 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x2C "V2P_DATA11,Virtual to Physical registers" bitfld.long 0x2C 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x2C 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x2C 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x2C 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x2C 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x2C 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x2C 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x2C 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x30 "V2P_DATA12,Virtual to Physical registers" bitfld.long 0x30 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x30 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x30 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x30 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x30 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x30 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x30 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x30 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x34 "V2P_DATA13,Virtual to Physical registers" bitfld.long 0x34 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x34 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x34 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x34 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x34 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x34 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x34 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x34 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x38 "V2P_DATA14,Virtual to Physical registers" bitfld.long 0x38 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x38 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x38 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x38 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x38 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x38 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x38 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x38 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x3C "V2P_DATA15,Virtual to Physical registers" bitfld.long 0x3C 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x3C 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x3C 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x3C 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x3C 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x3C 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x3C 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x3C 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x40 "V2P_WEIGHTS0,Virtual to Physical registers" bitfld.long 0x40 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x40 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x40 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x40 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x40 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x40 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x40 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x40 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x44 "V2P_WEIGHTS1,Virtual to Physical registers" bitfld.long 0x44 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x44 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x44 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x44 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x44 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x44 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x44 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x44 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x48 "V2P_WEIGHTS2,Virtual to Physical registers" bitfld.long 0x48 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x48 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x48 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x48 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x48 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x48 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x48 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x48 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x4C "V2P_WEIGHTS3,Virtual to Physical registers" bitfld.long 0x4C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x4C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x4C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x4C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x4C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x4C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x4C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x4C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x50 "V2P_WEIGHTS4,Virtual to Physical registers" bitfld.long 0x50 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x50 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x50 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x50 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x50 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x50 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x50 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x50 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x54 "V2P_WEIGHTS5,Virtual to Physical registers" bitfld.long 0x54 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x54 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x54 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x54 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x54 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x54 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x54 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x54 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x58 "V2P_WEIGHTS6,Virtual to Physical registers" bitfld.long 0x58 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x58 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x58 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x58 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x58 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x58 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x58 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x58 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x5C "V2P_WEIGHTS7,Virtual to Physical registers" bitfld.long 0x5C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x5C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x5C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x5C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x5C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x5C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x5C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x5C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x60 "V2P_WEIGHTS8,Virtual to Physical registers" bitfld.long 0x60 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x60 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x60 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x60 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x60 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x60 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x60 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x60 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x64 "V2P_WEIGHTS9,Virtual to Physical registers" bitfld.long 0x64 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x64 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x64 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x64 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x64 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x64 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x64 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x64 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x68 "V2P_WEIGHTS10,Virtual to Physical registers" bitfld.long 0x68 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x68 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x68 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x68 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x68 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x68 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x68 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x68 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x6C "V2P_WEIGHTS11,Virtual to Physical registers" bitfld.long 0x6C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x6C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x6C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x6C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x6C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x6C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x6C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x6C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x70 "V2P_WEIGHTS12,Virtual to Physical registers" bitfld.long 0x70 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x70 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x70 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x70 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x70 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x70 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x70 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x70 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x74 "V2P_WEIGHTS13,Virtual to Physical registers" bitfld.long 0x74 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x74 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x74 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x74 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x74 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x74 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x74 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x74 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x78 "V2P_WEIGHTS14,Virtual to Physical registers" bitfld.long 0x78 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x78 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x78 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x78 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x78 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x78 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x78 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x78 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x7C "V2P_WEIGHTS15,Virtual to Physical registers" bitfld.long 0x7C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x7C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x7C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x7C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x7C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x7C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x7C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x7C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x80 "V2P_RESULTS0,Virtual to Physical registers" bitfld.long 0x80 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x80 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x80 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x80 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x80 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x80 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x80 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x80 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x84 "V2P_RESULTS1,Virtual to Physical registers" bitfld.long 0x84 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x84 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x84 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x84 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x84 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x84 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x84 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x84 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x88 "V2P_RESULTS2,Virtual to Physical registers" bitfld.long 0x88 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x88 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x88 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x88 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x88 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x88 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x88 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x88 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x8C "V2P_RESULTS3,Virtual to Physical registers" bitfld.long 0x8C 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x8C 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x8C 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x8C 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x8C 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x8C 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x8C 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x8C 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x90 "V2P_RESULTS4,Virtual to Physical registers" bitfld.long 0x90 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x90 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x90 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x90 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x90 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x90 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x90 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x90 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x94 "V2P_RESULTS5,Virtual to Physical registers" bitfld.long 0x94 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x94 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x94 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x94 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x94 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x94 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x94 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x94 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x98 "V2P_RESULTS6,Virtual to Physical registers" bitfld.long 0x98 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x98 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x98 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x98 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x98 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x98 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x98 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x98 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x9C "V2P_RESULTS7,Virtual to Physical registers" bitfld.long 0x9C 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x9C 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x9C 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x9C 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x9C 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x9C 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x9C 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x9C 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xA0 "V2P_RESULTS8,Virtual to Physical registers" bitfld.long 0xA0 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xA0 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xA0 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xA0 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xA0 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xA0 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xA0 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xA0 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xA4 "V2P_RESULTS9,Virtual to Physical registers" bitfld.long 0xA4 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xA4 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xA4 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xA4 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xA4 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xA4 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xA4 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xA4 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xA8 "V2P_RESULTS10,Virtual to Physical registers" bitfld.long 0xA8 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xA8 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xA8 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xA8 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xA8 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xA8 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xA8 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xA8 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xAC "V2P_RESULTS11,Virtual to Physical registers" bitfld.long 0xAC 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xAC 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xAC 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xAC 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xAC 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xAC 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xAC 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xAC 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xB0 "V2P_RESULTS12,Virtual to Physical registers" bitfld.long 0xB0 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xB0 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xB0 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xB0 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xB0 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xB0 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xB0 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xB0 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xB4 "V2P_RESULTS13,Virtual to Physical registers" bitfld.long 0xB4 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xB4 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xB4 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xB4 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xB4 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xB4 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xB4 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xB4 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xB8 "V2P_RESULTS14,Virtual to Physical registers" bitfld.long 0xB8 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xB8 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xB8 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xB8 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xB8 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xB8 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xB8 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xB8 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xBC "V2P_RESULTS15,Virtual to Physical registers" bitfld.long 0xBC 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xBC 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xBC 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xBC 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xBC 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xBC 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xBC 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xBC 0.--5. 1. "R_VMAP0,VMAP0" group.long 0x4F0++0x3 line.long 0x0 "LISTEN,Listener mode enable register" bitfld.long 0x0 7. "LISTENER3,LISTENER3" "0,1" bitfld.long 0x0 6. "LISTENER2,LISTENER2" "0,1" newline bitfld.long 0x0 5. "LISTENER1,LISTENER1" "0,1" bitfld.long 0x0 0.--1. "MODE,MODE" "0: None. No listener mode,1: Data Listening,2: Weight Listening,?" tree.end tree "MMR_ZV" base ad:0x80000 group.long 0x0++0x37 line.long 0x0 "RESETCTRL,Reset and Control register" hexmask.long.byte 0x0 16.--19. 1. "NGANGDIS,NGANGDIS" bitfld.long 0x0 12. "ZMEMFREE,ZMEMFREE" "0: If 0 the ITCM and DTCM will be unavailable when..,1: If 1 the ITCM and DTCM will be available.." newline hexmask.long.byte 0x0 8.--11. 1. "MEMENA,MEMENA" hexmask.long.byte 0x0 4.--7. 1. "NRUN,NRUN" newline bitfld.long 0x0 1.--3. "OCMCNT,OCMCNT" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0. "ZVRUN,ZVRUN" "0: If Zen-V is held in reset,1: If running" line.long 0x4 "STATUSERR,Zen-V Status and Error register" eventfld.long 0x4 28. "OCMECCFATAL,OCMECCFATAL" "0,1" hexmask.long.byte 0x4 20.--27. 1. "OCMECCCORR,OCMECCCORR" newline eventfld.long 0x4 18. "DECOMPERR,DECOMPERR" "0,1" hexmask.long.byte 0x4 9.--16. 1. "REQCONTID,REQCONTID" newline eventfld.long 0x4 8. "REQCONT,REQCONT" "0,1" eventfld.long 0x4 6. "NDAERR,NDAERR" "0,1" newline eventfld.long 0x4 5. "NWAERR,NWAERR" "0,1" eventfld.long 0x4 4. "NRAERR,NRAERR" "0,1" newline rbitfld.long 0x4 1. "ZVFAULT,Zen-V core fault" "0,1" rbitfld.long 0x4 0. "ZVHALT,Zen-V core HALT" "0,1" line.long 0x8 "INTENA,Interrupt enabling for SoC register" bitfld.long 0x8 20. "ZVFAULT,ZVFAULT" "0,1" bitfld.long 0x8 19. "OCMECCFATAL,OCMECCFATAL" "0,1" newline bitfld.long 0x8 18. "OCMECCSAT,OCMECCSAT" "0,1" bitfld.long 0x8 17. "REQCONT,REQCONT" "0,1" newline bitfld.long 0x8 16. "AERR,AERR" "0,1" bitfld.long 0x8 7. "SHUTDOWN,SHUTDOWN" "0,1" newline bitfld.long 0x8 2. "MBOX,MBOX" "0,1" bitfld.long 0x8 1. "INFDONE,INFDONE" "0,1" newline bitfld.long 0x8 0. "ZVHALT,ZVHALT" "0,1" line.long 0xC "INTCLR,Interrupt clear for SoC register" bitfld.long 0xC 20. "ZVFAULT,ZVFAULT" "0,1" bitfld.long 0xC 19. "OCMECCFATAL,OCMECCFATAL" "0,1" newline bitfld.long 0xC 18. "OCMECCSAT,OCMECCSAT" "0,1" bitfld.long 0xC 17. "REQCONT,REQCONT" "0,1" newline bitfld.long 0xC 16. "AERR,AERR" "0,1" bitfld.long 0xC 7. "SHUTDOWN,SHUTDOWN" "0,1" newline bitfld.long 0xC 2. "MBOX,MBOX" "0,1" bitfld.long 0xC 1. "INFDONE,INFDONE" "0,1" newline bitfld.long 0xC 0. "ZVHALT,ZVHALT" "0,1" line.long 0x10 "CYCLOW,Cycle counter register" hexmask.long 0x10 0.--31. 1. "CNT_LOW,CNT_LOW" line.long 0x14 "CYCHIGH,Cycle counter register" hexmask.long 0x14 0.--31. 1. "CNT_HIGH,CNT_HIGH" line.long 0x18 "DDRLATENT,DDR Latency performance counter register" hexmask.long 0x18 0.--31. 1. "CNT,CNT" line.long 0x1C "DDRSPREAD,DDR Data read spread perf counter register" hexmask.long 0x1C 0.--31. 1. "CNT,CNT" line.long 0x20 "DDRRCNTS,DDR read performance counter register" hexmask.long 0x20 0.--31. 1. "CNT_DDRR,CNT_DDRR" line.long 0x24 "DDRWWORDS,DDR write performance counter register" hexmask.long 0x24 0.--31. 1. "CNT,Count" line.long 0x28 "DDRRWORDS,DDR read word performance counter register" hexmask.long 0x28 0.--31. 1. "CNT,CNT" line.long 0x2C "DDRSTALL,DDR stall perf counter register" hexmask.long.word 0x2C 16.--31. 1. "WSTALLS,WSTALLS" hexmask.long.word 0x2C 0.--15. 1. "REQSTALLS,REQSTALLS" line.long 0x30 "NSTALL,Neutron stall perf counter register" hexmask.long.word 0x30 16.--31. 1. "WSTALLS,WSTALLS" hexmask.long.word 0x30 0.--15. 1. "DSTALLS,DSTALLS" line.long 0x34 "NACT,Neutron active perf counter register" hexmask.long 0x34 0.--31. 1. "CNT,CNT" group.long 0x60++0xF line.long 0x0 "ZVIV2P0,Zen-V Code Virtual to Physical register" hexmask.long.byte 0x0 24.--31. 1. "MATCH3,MATCH2" hexmask.long.byte 0x0 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0x0 8.--15. 1. "MATCH1,MATCH1" bitfld.long 0x0 3. "DATA3,DATA3" "0,1" newline bitfld.long 0x0 2. "DATA2,DATA2" "0,1" bitfld.long 0x0 1. "DATA1,DATA1" "0,1" newline rbitfld.long 0x0 0. "ERROR,ERROR" "0,1" line.long 0x4 "ZVIV2P1,Zen-V Code Virtual to Physical register" hexmask.long.byte 0x4 24.--31. 1. "MATCH3,MATCH3" hexmask.long.byte 0x4 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0x4 8.--15. 1. "MATCH1,MATCH1" hexmask.long.byte 0x4 0.--7. 1. "MATCH0,MATCH0" line.long 0x8 "ZVIV2P2,Zen-V Code Virtual to Physical register" hexmask.long.byte 0x8 24.--31. 1. "MATCH3,MATCH3" hexmask.long.byte 0x8 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0x8 8.--15. 1. "MATCH1,MATCH1" hexmask.long.byte 0x8 0.--7. 1. "MATCH0,MATCH0" line.long 0xC "ZVIV2P3,Zen-V Code Virtual to Physical register" hexmask.long.byte 0xC 24.--31. 1. "MATCH3,MATCH3" hexmask.long.byte 0xC 16.--23. 1. "MATCH2,MATCH2" newline hexmask.long.byte 0xC 8.--15. 1. "MATCH1,MATCH1" hexmask.long.byte 0xC 0.--7. 1. "MATCH0,MATCH0" group.long 0x80++0x13 line.long 0x0 "TTCTRL,TCM-TCM Control" hexmask.long.word 0x0 22.--31. 1. "ITER,ITER" hexmask.long.word 0x0 8.--21. 1. "SIZE,SIZE" newline hexmask.long.byte 0x0 0.--7. 1. "STRIDE,STRIDE" line.long 0x4 "TTSADDR,TCM-TCM Source address" hexmask.long 0x4 0.--31. 1. "ADDR,ADDR" line.long 0x8 "TTDADDR,TCM-TCM Destination address" hexmask.long 0x8 0.--31. 1. "ADDR,ADDR" line.long 0xC "TTCTRL2,TCM-TCM Control2" hexmask.long.byte 0xC 24.--31. 1. "PAD,PAD" bitfld.long 0xC 22.--23. "MODE,MODE" "0: Normal Slice (src_stride),1: Destination stride (using {pad src_stride}),2: Inject padding (using src_stride),?" newline hexmask.long.tbyte 0xC 0.--18. 1. "DSTLEN,DSTLEN" line.long 0x10 "CONFIG,Configuration register" bitfld.long 0x10 19. "WWFIENA,WWFIENA" "0,1" bitfld.long 0x10 18. "PWFIENA,PWFIENA" "0,1" newline bitfld.long 0x10 17. "FWFIENA,FWFIENA" "0,1" bitfld.long 0x10 16. "TTWFIENA,TTWFIENA" "0,1" newline eventfld.long 0x10 12. "EINT,EINT" "0,1" eventfld.long 0x10 11. "WINT,WINT" "0,1" newline eventfld.long 0x10 10. "PINT,Push channel interrupt status" "0,1" eventfld.long 0x10 9. "FINT,Fetch channel interrupt status" "0,1" newline eventfld.long 0x10 8. "TTINT,TCM-TCM channel interrupt status" "0,1" bitfld.long 0x10 7. "RELEASE,Zen-V Release" "0,1" newline bitfld.long 0x10 4. "ERRENA,Enable error interrupt" "0,1" bitfld.long 0x10 3. "WINTENA,Enable weight channel interrupt" "0,1" newline bitfld.long 0x10 2. "PINTENA,Enable push channel interrupt" "0,1" bitfld.long 0x10 1. "FINTENA,Enable fetch channel interrupt" "0,1" newline bitfld.long 0x10 0. "TTINTENA,Enable TCM-TCM channel interrupt" "0,1" rgroup.long 0x94++0x3 line.long 0x0 "STATUS,Data mover status register" bitfld.long 0x0 20. "DECOMPERR,DECOMPERR" "0,1" bitfld.long 0x0 19. "XWRSTALL,XWRSTALL" "0,1" newline bitfld.long 0x0 18. "XRDSTALL,XRDSTALL" "0,1" bitfld.long 0x0 17. "LWRSTALL,LWRSTALL" "0,1" newline bitfld.long 0x0 16. "LRDSTALL,LRDSTALL" "0,1" bitfld.long 0x0 15. "XERR,DERRS" "0,1" newline bitfld.long 0x0 13. "WERRS,DERRS" "0,1" bitfld.long 0x0 12. "WERRD,DERRS" "0,1" newline hexmask.long.byte 0x0 8.--11. 1. "DERRS,DERRS" hexmask.long.byte 0x0 4.--7. 1. "DERRD,DERRD" newline bitfld.long 0x0 1. "TTERRS,TTERRS" "0,1" bitfld.long 0x0 0. "TTERRD,TTERRD" "0,1" group.long 0x98++0xB line.long 0x0 "DFORDER,Fetch order manager" bitfld.long 0x0 24.--26. "ADD,ADD" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 16.--18. "LIST3,LIST3" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x0 12.--14. "LIST2,LIST2" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 8.--10. "LIST1,LIST1" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x0 4.--6. "LIST0,LIST0" "0,1,2,3,4,5,6,7" rbitfld.long 0x0 2. "STALL,STALL" "0,1" newline rbitfld.long 0x0 0.--1. "INDEX,INDEX" "0,1,2,3" line.long 0x4 "DPORDER,Push order manager" bitfld.long 0x4 24.--26. "ADD,ADD" "0,1,2,3,4,5,6,7" rbitfld.long 0x4 16.--18. "LIST3,LIST3" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x4 12.--14. "LIST2,LIST2" "0,1,2,3,4,5,6,7" rbitfld.long 0x4 8.--10. "LIST1,LIST1" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x4 4.--6. "LIST0,LIST0" "0,1,2,3,4,5,6,7" rbitfld.long 0x4 2. "STALL,STALL" "0,1" newline rbitfld.long 0x4 0.--1. "INDEX,INDEX" "0,1,2,3" line.long 0x8 "DCTRL0_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x8 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x8 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x8 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x8 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x8 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x8 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xA0++0x7 line.long 0x0 "DCTRL0_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DCTRL1_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x4 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x4 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x4 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x4 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x4 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x4 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xA4++0x7 line.long 0x0 "DCTRL1_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DCTRL2_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x4 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x4 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x4 4.--19. 1. "DESTLEN0,DESTLEN0" bitfld.long 0x4 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x4 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x4 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xA8++0x7 line.long 0x0 "DCTRL2_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DCTRL3_FETCH,Push and Fetch Control regs" hexmask.long.byte 0x4 24.--31. 1. "PADBYTE,PADBYTE" hexmask.long.byte 0x4 20.--23. 1. "PADCNT,PADCNT" newline hexmask.long.word 0x4 4.--19. 1. "DESTLEN0,DESTLEN0" bitfld.long 0x4 3. "PADINSERT,PADINSERT" "0,1" newline bitfld.long 0x4 2. "SRCEQDST,SRCEQDST" "0,1" bitfld.long 0x4 0.--1. "MODE,MODE" "0,1,2,3" group.long 0xAC++0x3F line.long 0x0 "DCTRL3_PUSH,Push and Fetch Control regs" hexmask.long.word 0x0 4.--19. 1. "DESTLEN,DESTLEN" bitfld.long 0x0 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x0 0.--1. "MODE,MODE" "0: Disabled,1: Activate,?,?" line.long 0x4 "DSADDR0,Push and Fetch Source Address regs" hexmask.long 0x4 0.--31. 1. "DSADDR0,DSADDR0" line.long 0x8 "DSADDR1,Push and Fetch Source Address regs" hexmask.long 0x8 0.--31. 1. "DSADDR1,DSADDR1" line.long 0xC "DSADDR2,Push and Fetch Source Address regs" hexmask.long 0xC 0.--31. 1. "DSADDR2,DSADDR2" line.long 0x10 "DSADDR3,Push and Fetch Source Address regs" hexmask.long 0x10 0.--31. 1. "DSADDR3,DSADDR3" line.long 0x14 "DDADDR0,Push and Fetch Destination Address regs" hexmask.long 0x14 0.--31. 1. "DDADDR0,DDADDR0" line.long 0x18 "DDADDR1,Push and Fetch Destination Address regs" hexmask.long 0x18 0.--31. 1. "DDADDR1,DDADDR1" line.long 0x1C "DDADDR2,Push and Fetch Destination Address regs" hexmask.long 0x1C 0.--31. 1. "DDADDR2,DDADDR2" line.long 0x20 "DDADDR3,Push and Fetch Destination Address regs" hexmask.long 0x20 0.--31. 1. "DDADDR3,DDADDR3" line.long 0x24 "DCTRL2_0,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x24 20.--31. 1. "ITER,ITER" hexmask.long.word 0x24 0.--13. 1. "SRCLEN,SRCLEN" line.long 0x28 "DCTRL2_1,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x28 20.--31. 1. "ITER1,ITER1" hexmask.long.word 0x28 0.--13. 1. "SRCLEN1,SRCLEN1" line.long 0x2C "DCTRL2_2,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x2C 22.--31. 1. "ITER2,ITER2" hexmask.long.word 0x2C 0.--13. 1. "SRCLEN2,SRCLEN2" line.long 0x30 "DCTRL2_3,Push_packed and Fetch 2nd Control regs" hexmask.long.word 0x30 22.--31. 1. "ITER3,ITER3" hexmask.long.word 0x30 0.--13. 1. "SRCLEN3,SRCLEN3" line.long 0x34 "WCTRL,Weight Fetch Control reg" hexmask.long.word 0x34 4.--19. 1. "LEN,LEN" rbitfld.long 0x34 2. "SRCEQDST,SRCEQDST" "0,1" newline bitfld.long 0x34 0.--1. "MODE,MODE" "?,1: Activate,?,3: Clears all pend-ready bits (see WPENDx)." line.long 0x38 "WSADDR,Weight Fetch Source Address reg" hexmask.long 0x38 4.--31. 1. "ADDR,ADDR" line.long 0x3C "WDADDR,Weight Fetch Destination Address" hexmask.long 0x3C 4.--31. 1. "ADDR,ADDR" group.long 0xF0++0x7 line.long 0x0 "DCTRL3_0,Fetch unpack 3rd control register" hexmask.long.word 0x0 16.--31. 1. "DSTSTRIDE,DSTSTRIDE" hexmask.long.word 0x0 0.--15. 1. "SRCSTRIDE,SRCSTRIDE" line.long 0x4 "DCTRL3_1,Fetch unpack 3rd control register" hexmask.long.word 0x4 16.--31. 1. "DSTSTRIDE,DSTSTRIDE" hexmask.long.word 0x4 0.--15. 1. "SRCSTRIDE,SRCSTRIDE" wgroup.long 0xF8++0x7 line.long 0x0 "WPEND1,Weight Pend/Ready set regs" hexmask.long.word 0x0 16.--31. 1. "WPEND1_ZONE1,WPEND1_ZONE0" hexmask.long.word 0x0 0.--15. 1. "WPEND1_ZONE0,WPEND1_ZONE0" line.long 0x4 "WPEND2,Weight Pend/Ready set regs" hexmask.long.word 0x4 16.--31. 1. "WPEND2_ZONE3,WPEND1_ZONE0" hexmask.long.word 0x4 0.--15. 1. "WPEND2_ZONE2,WPEND1_ZONE0" group.long 0x200++0x3 line.long 0x0 "APPCTRL_SOC,Application Control register" hexmask.long.byte 0x0 24.--31. 1. "MBSOCWR,MBSOCWR" hexmask.long.byte 0x0 16.--23. 1. "MBZVWR,MBZVWR" newline rbitfld.long 0x0 10. "INTMBOXENA2,INTMBOXENA" "0,1" rbitfld.long 0x0 9. "INTDONEENA2,INTDONEENA" "0,1" newline bitfld.long 0x0 8. "RINGSTALL,RINGSTALL" "0,1" bitfld.long 0x0 5. "RESDONE,RESDONE" "0,1" newline bitfld.long 0x0 4. "IMGPONG,IMGPONG" "0,1" bitfld.long 0x0 2. "SYS_SHUTDOWN,SYS_SHUTDOWN" "0,1" newline bitfld.long 0x0 1. "INFHALT,INFHALT" "0,1" bitfld.long 0x0 0. "INFCONT,INFCONT" "0,1" group.long 0x200++0x27 line.long 0x0 "APPCTRL_ZV,Application Control register" hexmask.long.byte 0x0 24.--31. 1. "MBSOCWR,MBSOCWR" hexmask.long.byte 0x0 16.--23. 1. "MBZVWR,MBZVWR" newline bitfld.long 0x0 10. "INTMBOXENA1,INTMBOXENA" "0,1" bitfld.long 0x0 9. "INTDONEENA1,INTDONEENA" "0,1" newline bitfld.long 0x0 8. "RINGSTALL,RINGSTALL" "0,1" eventfld.long 0x0 5. "RESDONE,RESDONE" "0,1" newline eventfld.long 0x0 4. "IMGPONG,IMGPONG" "0,1" bitfld.long 0x0 2. "SYS_SHUTDOWN,SYS_SHUTDOWN" "0,1" newline eventfld.long 0x0 1. "INFHALT,INFHALT" "0,1" eventfld.long 0x0 0. "INFCONT,INFCONT" "0,1" line.long 0x4 "APPSTATUS,Messages to SoC by Zen-V App using W1S" eventfld.long 0x4 4. "MBOX,MBOX" "0,1" eventfld.long 0x4 3. "INFOUTHALF,INFOUTHALF" "0,1" newline eventfld.long 0x4 2. "INFBUFFHALF,INFBUFFHALF" "0,1" eventfld.long 0x4 1. "INFHALTED,INFHALTED" "0,1" newline eventfld.long 0x4 0. "INFDONE,INFDONE" "0,1" line.long 0x8 "BASEDDRL,Base physical address in DDR" hexmask.long.word 0x8 20.--31. 1. "BASEDDRL,BASEDDRL" hexmask.long.word 0x8 8.--16. 1. "LIMITMB,LIMITMB" newline rbitfld.long 0x8 0. "SPLITPRIV,SPLITPRIV" "0,1" line.long 0xC "BASEDDRH,Base physical address in DDR" rbitfld.long 0xC 17. "BASEDDRH_2,BASEDDRH" "0,1" hexmask.long.tbyte 0xC 0.--16. 1. "BASEDDRH_1,BASEDDRH" line.long 0x10 "INPUT,Offset of Input image from DDR Base" rbitfld.long 0x10 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x10 4.--25. 1. "INPUT,INPUT" line.long 0x14 "INPUT2,Offset of Input image from DDR Base" rbitfld.long 0x14 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x14 4.--25. 1. "INPUT2,INPUT2" line.long 0x18 "OUTPUT,Offset of Output results from DDR Base" rbitfld.long 0x18 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x18 4.--25. 1. "OUTPUT,OUTPUT" line.long 0x1C "OUTPUT2,Offset of Output results from DDR Base" rbitfld.long 0x1C 31. "INOUT,INOUT" "0,1" hexmask.long.tbyte 0x1C 4.--25. 1. "OUTPUT2,OUTPUT2" line.long 0x20 "CODEOFF,Offset of Zen-V code from BASEDDRn" hexmask.long.tbyte 0x20 4.--26. 1. "CODEOFF,CODEOFF" line.long 0x24 "DATAOFF,Offset of Zen-V data from BASEDDRn" hexmask.long.tbyte 0x24 4.--26. 1. "DATAOFF,DATAOFF" group.long 0x230++0x3 line.long 0x0 "RINGCTRL,Ring buffer control by Zen-V" hexmask.long.word 0x0 8.--16. 1. "RINGADDR,RINGADDR" hexmask.long.byte 0x0 0.--7. 1. "RINGSZ,RINGSZ" group.long 0x238++0x7 line.long 0x0 "TAIL,Tail of ring buffer written by Zen-V" hexmask.long.word 0x0 0.--15. 1. "TAIL,TAIL" line.long 0x4 "HEAD,Head of ring buffer written by SoC" hexmask.long.word 0x4 0.--15. 1. "HEAD,HEAD" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x240)++0x3 line.long 0x0 "MBOX[$1],Mailboxes for SoC/Zen-V comms" hexmask.long 0x0 0.--31. 1. "MBOX,MBOX" repeat.end group.long 0x280++0xF line.long 0x0 "BASEINOUTL,Base physical address for Input/Output fetch/push" hexmask.long.word 0x0 20.--31. 1. "BASEINOUTL,BASESPILLL" hexmask.long.word 0x0 8.--16. 1. "LIMITMB,LIMITMB" line.long 0x4 "BASEINOUTH,Base physical address for Spill fetch/push" bitfld.long 0x4 17. "BASEINOUTH_2,BASEINOUTH" "0,1" hexmask.long.tbyte 0x4 0.--16. 1. "BASEINOUTH_1,BASEINOUTH" line.long 0x8 "BASESPILLL,Base physical address for Spill fetch/push" hexmask.long.word 0x8 20.--31. 1. "BASESPILLL,BASESPILLL" hexmask.long.word 0x8 8.--16. 1. "LIMITMB,LIMITMB" newline rbitfld.long 0x8 0. "SPLITPRIV,SPLITPRIV" "0,1" line.long 0xC "BASESPILLH,Base physical address for Spill fetch/push" hexmask.long.tbyte 0xC 0.--17. 1. "BASESPILLH,BASESPILLH" group.long 0x300++0xB line.long 0x0 "DECOMPCTRL,Control for Weight Decompressor" bitfld.long 0x0 8. "NEW_GROUP,NEW_GROUP" "0,1" bitfld.long 0x0 4.--5. "NEW_META,NEW_META" "0,1,2,3" newline bitfld.long 0x0 1. "BYPASS,BYPASS" "0,1" bitfld.long 0x0 0. "ENABLE,ENABLE" "0,1" line.long 0x4 "DECOMPSTAT,state for Weight Decompressor" eventfld.long 0x4 5. "ERR_UNDER,ERR_UNDER" "0,1" eventfld.long 0x4 4. "ERR_OVER,ERR_OVER" "0,1" newline eventfld.long 0x4 3. "ERR_BUS,ERR_BUS" "0,1" eventfld.long 0x4 2. "ERR_DECOMP,ERR_DECOMP" "0,1" newline rbitfld.long 0x4 1. "ACTIVE,ACTIVE" "0,1" rbitfld.long 0x4 0. "DONE,DONE" "0,1" line.long 0x8 "GROUP_BASE,DDR offset from base for Weight Decompressor" hexmask.long.tbyte 0x8 4.--26. 1. "OFFSET,OFFSET" group.long 0x310++0x3 line.long 0x0 "GROUP_LEN,Length in bytes of current Decompressor Group in External memory" hexmask.long.word 0x0 4.--17. 1. "LEN,LEN" group.long 0x340++0x1B line.long 0x0 "CRYPTO,Control for Cryptographic protection of models by SoC security" bitfld.long 0x0 9. "ZERORAM,ZERORAM" "0,1" bitfld.long 0x0 8. "CRYPTOMODEL,CRYPTOMODEL" "0,1" newline bitfld.long 0x0 2. "PCLOCK,PCLOCK" "0,1" bitfld.long 0x0 1. "DBGLOCK,DBGLOCK" "0,1" newline bitfld.long 0x0 0. "CRYPTOLOCK,CRYPTOLOCK" "0,1" line.long 0x4 "PRIVDDRL,Physical address in DDR of model when secure" hexmask.long.word 0x4 20.--31. 1. "PRIVDDRL,PRIVDDRL" hexmask.long.word 0x4 8.--16. 1. "LIMITMB,LIMITMB" newline rbitfld.long 0x4 0. "SPLITPRIV,SPLITPRIV" "0,1" line.long 0x8 "PRIVDDRH,Physical address in DDR of model when secure" rbitfld.long 0x8 17. "BASEDDRH2,BASEDDRH" "0,1" hexmask.long.tbyte 0x8 0.--16. 1. "BASEDDRH1,BASEDDRH" line.long 0xC "SESSIONIV,Unique IV for Protected models" hexmask.long 0xC 0.--31. 1. "NONCE,NONCE" line.long 0x10 "INFCOUNT,Infocount" hexmask.long 0x10 0.--31. 1. "COUNT,COUNT" line.long 0x14 "FLAYERNUM,Layer number for Fetch" hexmask.long.word 0x14 0.--15. 1. "NUM,NUM" line.long 0x18 "PLAYERNUM,Layer number for Push" hexmask.long.word 0x18 0.--15. 1. "NUM,NUM" group.long 0x360++0x3 line.long 0x0 "AXIOPT,Boot SoC setting for AXI optimization" hexmask.long.byte 0x0 28.--31. 1. "RRDCNT,ARTRIG" hexmask.long.byte 0x0 16.--23. 1. "ARTRIG,ARTRIG" newline hexmask.long.byte 0x0 8.--15. 1. "AWLEN,AWLEN" hexmask.long.byte 0x0 0.--7. 1. "ARLEN,ARLEN" group.long 0x400++0xBF line.long 0x0 "V2P_DATA0,Virtual to Physical registers" bitfld.long 0x0 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x0 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x0 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x0 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x0 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x0 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x0 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x0 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x4 "V2P_DATA1,Virtual to Physical registers" bitfld.long 0x4 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x4 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x4 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x4 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x4 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x4 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x4 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x4 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x8 "V2P_DATA2,Virtual to Physical registers" bitfld.long 0x8 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x8 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x8 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x8 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x8 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x8 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x8 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x8 0.--5. 1. "D_VMAP0,VMAP0" line.long 0xC "V2P_DATA3,Virtual to Physical registers" bitfld.long 0xC 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xC 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0xC 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xC 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0xC 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xC 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0xC 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xC 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x10 "V2P_DATA4,Virtual to Physical registers" bitfld.long 0x10 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x10 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x10 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x10 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x10 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x10 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x10 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x10 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x14 "V2P_DATA5,Virtual to Physical registers" bitfld.long 0x14 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x14 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x14 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x14 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x14 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x14 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x14 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x14 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x18 "V2P_DATA6,Virtual to Physical registers" bitfld.long 0x18 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x18 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x18 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x18 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x18 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x18 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x18 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x18 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x1C "V2P_DATA7,Virtual to Physical registers" bitfld.long 0x1C 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x1C 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x1C 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x1C 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x1C 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x1C 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x1C 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x1C 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x20 "V2P_DATA8,Virtual to Physical registers" bitfld.long 0x20 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x20 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x20 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x20 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x20 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x20 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x20 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x20 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x24 "V2P_DATA9,Virtual to Physical registers" bitfld.long 0x24 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x24 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x24 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x24 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x24 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x24 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x24 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x24 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x28 "V2P_DATA10,Virtual to Physical registers" bitfld.long 0x28 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x28 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x28 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x28 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x28 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x28 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x28 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x28 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x2C "V2P_DATA11,Virtual to Physical registers" bitfld.long 0x2C 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x2C 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x2C 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x2C 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x2C 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x2C 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x2C 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x2C 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x30 "V2P_DATA12,Virtual to Physical registers" bitfld.long 0x30 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x30 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x30 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x30 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x30 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x30 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x30 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x30 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x34 "V2P_DATA13,Virtual to Physical registers" bitfld.long 0x34 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x34 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x34 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x34 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x34 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x34 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x34 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x34 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x38 "V2P_DATA14,Virtual to Physical registers" bitfld.long 0x38 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x38 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x38 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x38 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x38 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x38 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x38 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x38 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x3C "V2P_DATA15,Virtual to Physical registers" bitfld.long 0x3C 31. "D_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x3C 24.--29. 1. "D_VMAP3,VMAP3" newline bitfld.long 0x3C 23. "D_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x3C 16.--21. 1. "D_VMAP2,VMAP2" newline bitfld.long 0x3C 15. "D_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x3C 8.--13. 1. "D_VMAP1,VMAP1" newline bitfld.long 0x3C 7. "D_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x3C 0.--5. 1. "D_VMAP0,VMAP0" line.long 0x40 "V2P_WEIGHTS0,Virtual to Physical registers" bitfld.long 0x40 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x40 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x40 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x40 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x40 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x40 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x40 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x40 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x44 "V2P_WEIGHTS1,Virtual to Physical registers" bitfld.long 0x44 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x44 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x44 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x44 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x44 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x44 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x44 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x44 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x48 "V2P_WEIGHTS2,Virtual to Physical registers" bitfld.long 0x48 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x48 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x48 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x48 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x48 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x48 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x48 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x48 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x4C "V2P_WEIGHTS3,Virtual to Physical registers" bitfld.long 0x4C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x4C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x4C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x4C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x4C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x4C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x4C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x4C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x50 "V2P_WEIGHTS4,Virtual to Physical registers" bitfld.long 0x50 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x50 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x50 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x50 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x50 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x50 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x50 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x50 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x54 "V2P_WEIGHTS5,Virtual to Physical registers" bitfld.long 0x54 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x54 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x54 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x54 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x54 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x54 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x54 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x54 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x58 "V2P_WEIGHTS6,Virtual to Physical registers" bitfld.long 0x58 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x58 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x58 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x58 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x58 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x58 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x58 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x58 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x5C "V2P_WEIGHTS7,Virtual to Physical registers" bitfld.long 0x5C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x5C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x5C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x5C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x5C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x5C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x5C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x5C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x60 "V2P_WEIGHTS8,Virtual to Physical registers" bitfld.long 0x60 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x60 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x60 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x60 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x60 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x60 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x60 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x60 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x64 "V2P_WEIGHTS9,Virtual to Physical registers" bitfld.long 0x64 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x64 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x64 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x64 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x64 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x64 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x64 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x64 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x68 "V2P_WEIGHTS10,Virtual to Physical registers" bitfld.long 0x68 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x68 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x68 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x68 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x68 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x68 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x68 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x68 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x6C "V2P_WEIGHTS11,Virtual to Physical registers" bitfld.long 0x6C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x6C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x6C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x6C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x6C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x6C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x6C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x6C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x70 "V2P_WEIGHTS12,Virtual to Physical registers" bitfld.long 0x70 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x70 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x70 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x70 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x70 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x70 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x70 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x70 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x74 "V2P_WEIGHTS13,Virtual to Physical registers" bitfld.long 0x74 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x74 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x74 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x74 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x74 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x74 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x74 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x74 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x78 "V2P_WEIGHTS14,Virtual to Physical registers" bitfld.long 0x78 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x78 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x78 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x78 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x78 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x78 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x78 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x78 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x7C "V2P_WEIGHTS15,Virtual to Physical registers" bitfld.long 0x7C 31. "W_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x7C 24.--29. 1. "W_VMAP3,VMAP3" newline bitfld.long 0x7C 23. "W_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x7C 16.--21. 1. "W_VMAP2,VMAP2" newline bitfld.long 0x7C 15. "W_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x7C 8.--13. 1. "W_VMAP1,VMAP1" newline bitfld.long 0x7C 7. "W_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x7C 0.--5. 1. "W_VMAP0,VMAP0" line.long 0x80 "V2P_RESULTS0,Virtual to Physical registers" bitfld.long 0x80 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x80 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x80 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x80 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x80 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x80 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x80 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x80 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x84 "V2P_RESULTS1,Virtual to Physical registers" bitfld.long 0x84 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x84 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x84 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x84 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x84 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x84 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x84 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x84 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x88 "V2P_RESULTS2,Virtual to Physical registers" bitfld.long 0x88 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x88 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x88 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x88 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x88 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x88 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x88 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x88 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x8C "V2P_RESULTS3,Virtual to Physical registers" bitfld.long 0x8C 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x8C 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x8C 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x8C 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x8C 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x8C 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x8C 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x8C 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x90 "V2P_RESULTS4,Virtual to Physical registers" bitfld.long 0x90 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x90 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x90 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x90 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x90 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x90 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x90 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x90 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x94 "V2P_RESULTS5,Virtual to Physical registers" bitfld.long 0x94 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x94 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x94 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x94 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x94 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x94 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x94 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x94 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x98 "V2P_RESULTS6,Virtual to Physical registers" bitfld.long 0x98 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x98 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x98 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x98 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x98 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x98 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x98 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x98 0.--5. 1. "R_VMAP0,VMAP0" line.long 0x9C "V2P_RESULTS7,Virtual to Physical registers" bitfld.long 0x9C 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0x9C 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0x9C 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0x9C 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0x9C 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0x9C 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0x9C 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0x9C 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xA0 "V2P_RESULTS8,Virtual to Physical registers" bitfld.long 0xA0 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xA0 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xA0 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xA0 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xA0 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xA0 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xA0 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xA0 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xA4 "V2P_RESULTS9,Virtual to Physical registers" bitfld.long 0xA4 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xA4 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xA4 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xA4 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xA4 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xA4 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xA4 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xA4 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xA8 "V2P_RESULTS10,Virtual to Physical registers" bitfld.long 0xA8 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xA8 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xA8 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xA8 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xA8 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xA8 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xA8 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xA8 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xAC "V2P_RESULTS11,Virtual to Physical registers" bitfld.long 0xAC 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xAC 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xAC 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xAC 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xAC 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xAC 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xAC 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xAC 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xB0 "V2P_RESULTS12,Virtual to Physical registers" bitfld.long 0xB0 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xB0 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xB0 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xB0 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xB0 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xB0 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xB0 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xB0 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xB4 "V2P_RESULTS13,Virtual to Physical registers" bitfld.long 0xB4 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xB4 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xB4 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xB4 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xB4 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xB4 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xB4 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xB4 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xB8 "V2P_RESULTS14,Virtual to Physical registers" bitfld.long 0xB8 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xB8 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xB8 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xB8 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xB8 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xB8 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xB8 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xB8 0.--5. 1. "R_VMAP0,VMAP0" line.long 0xBC "V2P_RESULTS15,Virtual to Physical registers" bitfld.long 0xBC 31. "R_WRUPD3,WRUPD3" "0,1" hexmask.long.byte 0xBC 24.--29. 1. "R_VMAP3,VMAP3" newline bitfld.long 0xBC 23. "R_WRUP2,WRUP2" "0,1" hexmask.long.byte 0xBC 16.--21. 1. "R_VMAP2,VMAP2" newline bitfld.long 0xBC 15. "R_WRUPD1,WRUPD1" "0,1" hexmask.long.byte 0xBC 8.--13. 1. "R_VMAP1,VMAP1" newline bitfld.long 0xBC 7. "R_WRUPD0,WRUPD0" "0,1" hexmask.long.byte 0xBC 0.--5. 1. "R_VMAP0,VMAP0" group.long 0x4F0++0x3 line.long 0x0 "LISTEN,Listener mode enable register" bitfld.long 0x0 7. "LISTENER3,LISTENER3" "0,1" bitfld.long 0x0 6. "LISTENER2,LISTENER2" "0,1" newline bitfld.long 0x0 5. "LISTENER1,LISTENER1" "0,1" bitfld.long 0x0 0.--1. "MODE,MODE" "0: None. No listener mode,1: Data Listening,2: Weight Listening,?" tree.end tree.end tree "NPU_EIM" base ad:0x4A860000 group.long 0x0++0x7 line.long 0x0 "EIMCR,Error Injection Module Configuration Register" bitfld.long 0x0 0. "GEIEN,Global Error Injection Enable" "0: Disabled,1: Enabled" line.long 0x4 "EICHEN,Error Injection Channel Enable register" bitfld.long 0x4 31. "EICH0EN,Error Injection Channel 0 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 30. "EICH1EN,Error Injection Channel 1 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." group.long 0x100++0x13 line.long 0x0 "EICHD0_WORD0,Error Injection Channel Descriptor 0. Word0" hexmask.long.tbyte 0x0 12.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD0_WORD1,Error Injection Channel Descriptor 0. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD0_WORD2,Error Injection Channel Descriptor 0. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" line.long 0xC "EICHD0_WORD3,Error Injection Channel Descriptor 0. Word3" hexmask.long 0xC 0.--31. 1. "B8_11DATA_MASK,Data Mask Bytes 8-11" line.long 0x10 "EICHD0_WORD4,Error Injection Channel Descriptor 0. Word4" hexmask.long 0x10 0.--31. 1. "B12_15DATA_MASK,Data Mask Bytes 12-15" group.long 0x144++0x3 line.long 0x0 "EICHD1_WORD1,Error Injection Channel Descriptor 1. Word1" bitfld.long 0x0 0. "B0_3DATA_MASK,Data Mask Bytes 0-3" "0,1" tree.end tree "NPU_LSTCU" base ad:0x4A850000 group.long 0x8++0x3 line.long 0x0 "ERR_STAT,Error Status" bitfld.long 0x0 17. "RFSF,Recoverable Fault Status" "0: No recoverable fault,1: Recoverable fault has occurred" bitfld.long 0x0 16. "UFSF,Unrecoverable Fault Status" "0: No unrecoverable fault,1: Unrecoverable fault has occurred" newline rbitfld.long 0x0 1. "INVP_MB,Invalid Pointer MBIST" "0: No invalid pointer to BIST controller.,1: Invalid BIST pointer specified during BIST.." group.long 0x10++0x3 line.long 0x0 "ERR_FM,Error Fault Mapping" bitfld.long 0x0 1. "INVPFMMB,Invalid BIST Pointer Fault Mapping during MBIST scheduling" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" rgroup.long 0x60++0x3 line.long 0x0 "MB_RSTAT0,MBIST Run Status 0" bitfld.long 0x0 0. "MBSTAT0,MBIST Run Result Status Bit 0" "0: Pass,1: Fail" group.long 0x180++0x3 line.long 0x0 "MBFM0,MBIST Fault Mapping 0" bitfld.long 0x0 0. "MBSTATFM0,MBIST_RUN_STAT0[MBSTAT0] Fault Mapping" "0: Recoverable fault mapping,1: Unrecoverable fault mapping" group.long 0x260++0x3 line.long 0x0 "STAG,Stagger" hexmask.long.byte 0x0 8.--15. 1. "MB_DELAY,MBIST Delay" group.long 0x270++0xB line.long 0x0 "PH1_DUR,Phase 1 Duration" hexmask.long.word 0x0 0.--9. 1. "PH1DUR,Phase 1 Duration" line.long 0x4 "ISODUR,Isolation Duration" hexmask.long.word 0x4 16.--25. 1. "DIS_DUR,Disable Duration" hexmask.long.word 0x4 0.--9. 1. "EN_DUR,Enable Duration" line.long 0x8 "SRCENDUR,Synchronous Reset Clock Enable Duration" hexmask.long.word 0x8 0.--9. 1. "CLKENDUR,Synchronous Reset Clock Enable Duration (in LSTCU clock cycles)" group.long 0x300++0x3 line.long 0x0 "MBPTR0,MBIST Scheduler Pointer" bitfld.long 0x0 31. "MBEOL,MBIST End of List" "0: Not end of list,1: End of list" bitfld.long 0x0 8. "MBCSM,MBIST Concurrent or Sequential Mode" "0: Sequential mode,1: Concurrent mode" newline hexmask.long.byte 0x0 0.--7. 1. "MBPTR,MBIST Pointer" tree.end tree "NPU_TCU" base ad:0x4A800000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,observe MIX fuse state and override it" rbitfld.long 0x0 1. "tcu_fuse_obs,fuse observation" "0,1" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree.end tree "PMA_MMD" base ad:0x4C800000 group.word 0x0++0x1 line.word 0x0 "SR_PMA_CTRL1,SR PMA MMD Control1 Register" bitfld.word 0x0 15. "RST,RST" "0,1" newline rbitfld.word 0x0 13. "SS13,Speed Selection This bit indicates the operational mode of the PCS-X block of the DWC_xpcs." "0,1" newline bitfld.word 0x0 11. "LPM,Low-Power Enable This bit controls the power-down mode of the DWC_xpcs." "0,1" newline rbitfld.word 0x0 6. "SS6,Speed Selection Bit 6 This bit always returns 1." "0,1" newline hexmask.word.byte 0x0 2.--5. 1. "SS_5_2,Speed Selection Bits [5:2] This field always returns 4'b0000." newline bitfld.word 0x0 0. "LB,Loopback Enable This bit enables the loopback control of the PHY." "0,1" rgroup.word 0x2++0xB line.word 0x0 "SR_PMA_STATUS1,SR PMA MMD Status1 Register" bitfld.word 0x0 7. "FLT,Fault Condition Detected This bit indicates that a fault condition is detected in the PHY." "0,1" newline bitfld.word 0x0 2. "RLU,Rx Link Up (RO LL Type) - 0: This bit goes low when the CDR status of the PHY goes low (indicated by xgxs_rx_valid_i{lane})." "0: This bit goes low when the CDR status of the PHY..,?" newline bitfld.word 0x0 1. "LPMS,Low-Power Mode Support When set this bit indicates that DWC_xpcs supports low-power mode." "0,1" line.word 0x2 "SR_PMA_DEV_ID_1,SR PMA MMD Device Identifier 1 Register" hexmask.word 0x2 0.--15. 1. "PMA_DEV_OUI_3_18,Organizationally Unique Identifier[3:18] The DWC_xpcs offers 24 configurable bits [24:1] known as OUI for identifying the device manufacturer." line.word 0x4 "SR_PMA_DEV_ID_2,SR PMA MMD Device Identifier 2 Register" hexmask.word.byte 0x4 10.--15. 1. "PMA_DEV_OUI_19_24,Organizationally Unique Identifier[19:24] The DWC_xpcs offers 24 configurable bits [24:1] known as OUI for identifying the device manufacturer." newline hexmask.word.byte 0x4 4.--9. 1. "PMA_DEV_MMN_5_0,Model Number This read-only field contains the 6-bit Model number of the device." newline hexmask.word.byte 0x4 0.--3. 1. "PMA_DEV_RN_3_0,Revision Number This read-only field contains the 4-bit Revision number of the device." line.word 0x6 "SR_PMA_SPD_ABL,SR PMA MMD Speed Ability Register" bitfld.word 0x6 4. "GC,1G Capable This bit indicates that the DWC_xpcs can support 1G mode." "0,1" newline bitfld.word 0x6 0. "XGC,10G Capable This bit indicates that the DWC_xpcs can support 10G mode." "0,1" line.word 0x8 "SR_PMA_DEV_PKG1,SR PMA MMD Devices in Package 1 Register" bitfld.word 0x8 7. "AN,Auto-Negotiation MMD This bit indicates that an AN MMD is present in the package." "0,1" newline bitfld.word 0x8 6. "TC,TC MMD This bit indicates that the device has the TC MMDs in the package." "0,1" newline bitfld.word 0x8 5. "DTEXS,DTE XGXS MMD This bit indicates that the device has the DTE XS MMD in the package." "0,1" newline bitfld.word 0x8 4. "PHYXS,PHY XGXS MMD This bit indicates that the device has the PHY XS MMD in the package." "0,1" newline bitfld.word 0x8 3. "PCS,PCS MMD This bit indicates that the device has PCS MMD in the package." "0,1" newline bitfld.word 0x8 2. "WIS,WIS MMD This bit indicates that the device has the WIS MMD in the package." "0,1" newline bitfld.word 0x8 1. "PMA_PMD,PMA or PMD MMD This bit indicates that the device has the PMA or PMD MMD in the package." "0,1" newline bitfld.word 0x8 0. "CLS22,Clause 22 Register Support This bit indicates that the Clause 22 (1G) functional register sets are implemented in this package." "0,1" line.word 0xA "SR_PMA_DEV_PKG2,SR PMA MMD Devices in Package 2 Register" bitfld.word 0xA 15. "VSD2,Vendor-Specific Device 2 This bit indicates that a vendor-specific device 2 is present in the package." "0,1" newline bitfld.word 0xA 14. "VSD1,Vendor-Specific Device 1 This bit indicates that the vendor-specific device 1 is present in the package." "0,1" group.word 0xE++0x1 line.word 0x0 "SR_PMA_CTRL2,SR PMA MMD Control2 Register" hexmask.word.byte 0x0 0.--5. 1. "PMA_TYPE,PMA Type Select During initialization the host must program an appropriate value depending upon the active PHY with which DWC_xpcs is interfacing." rgroup.word 0x10++0x1 line.word 0x0 "SR_PMA_STATUS2,SR PMA MMD Status2 Register" bitfld.word 0x0 14.--15. "DP,Device Present Status The value 2'b10 indicates that the PMA MMD is present and responding to this register address." "0,1,2,3" newline bitfld.word 0x0 13. "PTFA,PMA Tx Fault Ability This bit indicates that the PMA MMD is able to detect a Tx fault." "0,1" newline bitfld.word 0x0 12. "PRFA,PMA Rx Fault Ability This bit indicates that the PMA MMD is able to detect an Rx fault." "0,1" newline bitfld.word 0x0 11. "TF,Transmitter Fault This bit indicates that DWC_xpcs encountered a remote fault condition on the PMA Tx path." "0,1" newline bitfld.word 0x0 10. "RF,Receiver Fault (LH Type) This bit indicates that the device encountered a fault condition on the Rx path." "0,1" newline bitfld.word 0x0 9. "EXT_ABL,This bit indicates that the PMA or PMD has extended abilities listed in the SR_PMA_EXT_ABL Register." "0,1" newline bitfld.word 0x0 8. "TD_ABL,PMA Tx Disable Ability This bit indicates that the PMD device is able to disable the Tx path." "0,1" newline bitfld.word 0x0 7. "SR_ABL,10GBASE-SR Capable This bit indicates if the PMA or PMD can support the 10GBASE-SR operation." "0,1" newline bitfld.word 0x0 6. "LR_ABL,10GBASE-LR Capable This bit indicates if the PMA or PMD can support the 10GBASE-LR operation." "0,1" newline bitfld.word 0x0 5. "ER_ABL,10GBASE-ER Capable This bit indicates if the PMA or PMD can support the 10GBASE-ER operation." "0,1" newline bitfld.word 0x0 4. "LX4_ABL,10GBASE-LX4 Capable This bit indicates if the PMA or PMD can support the 10GBASE-LX4 operation." "0,1" newline bitfld.word 0x0 3. "XGSWEN,10GBASE-SW Capable This bit indicates if the PMA can support the 10GBASE-SW operation." "0,1" newline bitfld.word 0x0 2. "XGLWEN,10GBASE-LW Capable This bit indicates if the PMA can support the 10GBASE-LW operation." "0,1" newline bitfld.word 0x0 1. "XGEWEN,10GBASE-EW Capable This bit indicates if the PMA can support the 10GBASE-EW operation." "0,1" newline bitfld.word 0x0 0. "PMA_LOOP,PMA Loopback Ability This bit indicates if the PMA has loopback ability." "0,1" group.word 0x12++0x1 line.word 0x0 "SR_PMA_TX_DIS,SR_PMA_TX_DIS" rbitfld.word 0x0 2.--4. "PMA_TX_DIS_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 1. "PMA_TX_DIS_0,Transmit Disable on Lane 0 This bit disables Tx on Lane 0." "0,1" newline bitfld.word 0x0 0. "GTD,Global Transmit Disable This bit disables all Tx lanes." "0,1" rgroup.word 0x14++0x3 line.word 0x0 "SR_PMA_RX_SIG_DET,SR PMA MMD Receive Signal Detect Register" bitfld.word 0x0 2.--4. "PMA_RX_DET_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 1. "PMA_RX_DET_0,Receive Signal Detect on Lane 0 This bit is high if Rx signal is detected on Lane 0." "0,1" newline bitfld.word 0x0 0. "RX_DET,Global Receive Signal Detect This is a combined signal detect for all lanes." "0,1" line.word 0x2 "SR_PMA_EXT_ABL,SR PMA or PMD Extended Ability Register" bitfld.word 0x2 8. "R_10BT_ABL,10BASE-T Capable This bit indicates if the PMA or PMD can support the 10BASE-T operation." "0,1" newline bitfld.word 0x2 7. "R_100BT_ABL,100BASE-T Capable This bit indicates if the PMA or PMD can support the 100BASE-T operation." "0,1" newline bitfld.word 0x2 6. "R_100BKX_ABL,1000BASE-KX Capable This bit indicates if the PMA or PMD can support the 1000BASE-KX operation." "0,1" newline bitfld.word 0x2 5. "GBT_ABL,1000BASE-T Capable This bit indicates if the PMA or PMD can support the 1000BASE-T operation." "0,1" newline bitfld.word 0x2 4. "XGBKR_ABL,10GBASE-KR Capable This bit indicates if the PMA or PMD can support the 10GBASE-KR operation." "0,1" newline bitfld.word 0x2 3. "XGKX4_ABL,10GBASE-KX4 Capable This bit indicates if the PMA or PMD can support the 10GBASE-KX4 operation." "0,1" newline bitfld.word 0x2 2. "XGBT_ABL,10GBASE-T Capable This bit indicates if the PMA or PMD can support the 10GBASE-T operation." "0,1" newline bitfld.word 0x2 1. "XGBLRM_ABL,10GBASE-LRM Capable This bit indicates if the PMA or PMD can support the 10GBASE-LRM operation." "0,1" newline bitfld.word 0x2 0. "XGBCX4_ABL,10GBASE-CX4 Capable This bit indicates if the PMA or PMD can support the 10GBASE-CX4 operation." "0,1" rgroup.word 0x1C++0x3 line.word 0x0 "SR_PMA_PKG1,SR PMA MMD Package Identifier 1 Register" hexmask.word 0x0 0.--15. 1. "PMA_PKG_OUI_3_18,Organizationally Unique Identifier The DWC_xpcs offers 24 configurable bits[24:1] known as OUI for identifying the device manufacturer." line.word 0x2 "SR_PMA_PKG2,SR PMA MMD Package Identifier 2 Register" hexmask.word.byte 0x2 10.--15. 1. "PMA_PKG_OUI_19_24,Organizationally Unique Identifier DWC_xpcs offers 24 configurable bits[24:1] known as OUI for identifying the device manufacturer." newline hexmask.word.byte 0x2 4.--9. 1. "PMA_PKG_MMN_5_0,Model Number This read-only field contains the 5-bit Model Number of the Package in which the MMDs are installed." newline hexmask.word.byte 0x2 0.--3. 1. "PMA_PKG_RN_3_0,Revision Number This read-only field contains the 4-bit Revision Number of the Package." rgroup.word 0x2A++0x1 line.word 0x0 "SR_PMA_2PT5G_5G_EXT_ABL,SR PMA MMD 2." bitfld.word 0x0 3. "ABL_5GKR,5GBASE-KR Capable This bit indicates if the PMA or PMD can support the 5GBASE-KR operation." "0,1" newline bitfld.word 0x0 2. "ABL_2PT5GKX,2." "0,1" newline bitfld.word 0x0 1. "ABL_5GT,5GBASE-T Capable This bit indicates if the PMA or PMD can support the 5GBASE-T operation." "0,1" newline bitfld.word 0x0 0. "ABL_2PT5GT,2." "0,1" rgroup.word 0x140++0x3 line.word 0x0 "SR_PMA_KX_CTRL,SR PMA or PMD KX Control Register This register is present only in the configurations with KX_Present mode." bitfld.word 0x0 0. "TOC,Reserved" "0,1" line.word 0x2 "SR_PMA_KX_STS,SR PMA or PMD KX Status Register This register is present only in the configurations with KX_Present mode." bitfld.word 0x2 13. "TFA,Tx Fault Ability This bit indicates that the PMA or PMD is able to detect the Tx fault." "0,1" newline bitfld.word 0x2 12. "RFA,Rx Fault Ability This bit indicates that the PMA or PMD is able to detect the Rx fault." "0,1" newline bitfld.word 0x2 11. "TX_F,Tx Fault This bit indicates that fault condition is detected in the Tx path for PMA MMD." "0,1" newline bitfld.word 0x2 10. "RX_F,Rx Fault This bit indicates that fault condition is detected in the Rx path for PMA MMD." "0,1" newline bitfld.word 0x2 8. "PMA_TDA,PMD Tx Disable Ability This bit indicates that the PMA has the ability to disable the transmission." "0,1" newline bitfld.word 0x2 0. "SD,Signal Detect This bit indicates that the PMD detected the signal detect state." "0,1" rgroup.word 0xE10++0x11 line.word 0x0 "SR_PMA_TIME_SYNC_PMA_ABL,SR PMA MMD Time Sync Capability Register" bitfld.word 0x0 1. "PMA_TX_DLY_ABL,PMA Transmit Path Data Delay Information Available." "0,1" newline bitfld.word 0x0 0. "PMA_RX_DLY_ABL,PMA Receive Path Data Delay Information Available." "0,1" line.word 0x2 "SR_PMA_TIME_SYNC_TX_MAX_DLY_LWR,SR PMA MMD Time Sync Tx Max Delay Lower Register" hexmask.word 0x2 0.--15. 1. "PMA_TX_MAX_DLY_LWR,This field indicates the lower 16-bit of the 32-bit value which indicates the Maximum Data Delay in the Transmit Path (in nanoseconds) of PMA." line.word 0x4 "SR_PMA_TIME_SYNC_TX_MAX_DLY_UPR,SR PMA MMD Time Sync Tx Max Delay Upper Register" hexmask.word 0x4 0.--15. 1. "PMA_TX_MAX_DLY_UPR,This field indicates the upper 16-bit of the 32-bit value which indicates the Maximum Data Delay in the Transmit Path (in nanoseconds) of PMA." line.word 0x6 "SR_PMA_TIME_SYNC_TX_MIN_DLY_LWR,SR PMA MMD Time Sync Tx Min Delay Lower Register" hexmask.word 0x6 0.--15. 1. "PMA_TX_MIN_DLY_LWR,This field indicates the lower 16-bit of the 32-bit value which indicates the Minimum Data Delay in the Transmit Path (in nanoseconds) of PMA." line.word 0x8 "SR_PMA_TIME_SYNC_TX_MIN_DLY_UPR,SR PMA MMD Time Sync Tx Min Delay Upper Register" hexmask.word 0x8 0.--15. 1. "PMA_TX_MIN_DLY_UPR,This field indicates the upper 16-bit of the 32-bit value which indicates the Minimum Data Delay in the Transmit Path (in nanoseconds) of PMA." line.word 0xA "SR_PMA_TIME_SYNC_RX_MAX_DLY_LWR,SR PMA MMD Time Sync Rx Max Delay Lower Register" hexmask.word 0xA 0.--15. 1. "PMA_RX_MAX_DLY_LWR,This field indicates the lower 16-bit of the 32-bit value which indicates the Maximum Data Delay in the Receive Path (in nanoseconds) of PMA." line.word 0xC "SR_PMA_TIME_SYNC_RX_MAX_DLY_UPR,SR PMA MMD Time Sync Rx Max Delay Upper Register" hexmask.word 0xC 0.--15. 1. "PMA_RX_MAX_DLY_UPR,This field indicates the upper 16-bit of the 32-bit value which indicates the Maximum Data Delay in the Receive Path (in nanoseconds) of PMA." line.word 0xE "SR_PMA_TIME_SYNC_RX_MIN_DLY_LWR,SR PMA MMD Time Sync Rx Min Delay Lower Register" hexmask.word 0xE 0.--15. 1. "PMA_RX_MIN_DLY_LWR,This field indicates the lower 16-bit of the 32-bit value which indicates the Minimum Data Delay in the Receive Path (in nanoseconds) of PMA." line.word 0x10 "SR_PMA_TIME_SYNC_RX_MIN_DLY_UPR,SR PMA MMD Time Sync Rx Min Delay Upper Register" hexmask.word 0x10 0.--15. 1. "PMA_RX_MIN_DLY_UPR,This field indicates the upper 16-bit of the 32-bit value which indicates the Minimum Data Delay in the Receive Path (in nanoseconds) of PMA." group.word 0x10000++0x1 line.word 0x0 "VR_PMA_DIG_CTRL1,VR PMA MMD Digital Control1 Register" bitfld.word 0x0 15. "VR_RST,VR_RST" "0,1" newline bitfld.word 0x0 11. "PWRSV,Power Save This bit is present only when the DWC_xpcs is configured for Synopsys PHY." "0,1" newline rbitfld.word 0x0 5.--7. "DTXLANED_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "DTXLANED_0,Tx Disable on Lane 0 When this bit is set the DWC_xpcs disables the Tx Lane 0 of the PHY." "0,1" newline bitfld.word 0x0 1. "BYP_PWRUP,Bypass Power-Up Sequence This bit is present only when the DWC_xpcs is configured for the Synopsys PHY." "0,1" newline rbitfld.word 0x0 0. "CL72_AUTO,CL72_AUTO" "0,1" rgroup.word 0x10020++0x1 line.word 0x0 "VR_PMA_DIG_STS,VR PMA MMD Digital Status Register" bitfld.word 0x0 2.--4. "PSEQ_STATE,Power Up Sequence State This field indicates the state variable value of the power-up sequence module." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 1. "LB_ACTIVE,Reserved" "0,1" rgroup.word 0x10040++0x1 line.word 0x0 "VR_XS_PMA_RX_LSTS,VR_XS_PMA_RX_LSTS" bitfld.word 0x0 13.--15. "RX_VALID_3_1,DPLL Lock Status for Lanes[3:1] This field indicates that the DPLL in the PHY is locked on the serial data in the corresponding lane." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 12. "RX_VALID_0,DPLL Lock Status for Lane 0 This field indicates that the DPLL in the PHY is locked on the serial data in Lane 0." "0,1" newline bitfld.word 0x0 9.--11. "RX_PLL_STATE_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 8. "RX_PLL_STATE_0,RX_PLL_STATE_0" "0,1" newline bitfld.word 0x0 5.--7. "SIG_DET_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "SIG_DET_0,Rx Signal Detect for Lane 0 This bit indicates that the Rx detected the signal on Lane 0." "0,1" group.word 0x10060++0xF line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_TX_GENCTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx General 0 Register" rbitfld.word 0x0 13.--15. "TX_DT_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 12. "TX_DT_EN_0,Tx Data Enable on lane 0 of PHY When this bit is set Transmit Output Driver in the PHY is enabled." "0,1" newline rbitfld.word 0x0 9.--11. "TX_RST_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 8. "TX_RST_0,Tx Reset on lane 0 of PHY When this bit is set PHY transmitter is reset including common-mode adjustment and receiver detection state machines." "0,1" newline rbitfld.word 0x0 5.--7. "TX_INV_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "TX_INV_0,Tx Invert on lane 0 of PHY When this bit is set the data on PHY Tx serial lines are logically inverted." "0,1" newline rbitfld.word 0x0 1.--3. "TXBCN_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "TXBCN_EN_0,Tx Beaconing Enable on lane 0 of PHY When this bit is set PHY enables transmitter beaconing (LFPS)." "0,1" line.word 0x2 "VR_XS_PMA_MP_12G_16G_25G_TX_GENCTRL1,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx General 1 Register" rbitfld.word 0x2 13.--15. "TX_CLK_RDY_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 12. "TX_CLK_RDY_0,Transmitter Input clock ready on lane 0 This field drives the output xpcs_tx_clk_rdy_o[0]." "0,1" newline bitfld.word 0x2 8.--10. "VBOOST_LVL,." "0,1,2,3,4,5,6,7" newline rbitfld.word 0x2 5.--7. "VBOOST_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 4. "VBOOST_EN_0,Tx voltage Boost Enable on lane 0 of PHY When this bit is set the current mode Tx Swing boost in the PHY is enabled." "0,1" newline rbitfld.word 0x2 1.--3. "DET_RX_REQ_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 0. "DET_RX_REQ_0,Transmitter Rx-Detection request on lane 0 of PHY." "0,1" line.word 0x4 "VR_XS_PMA_MP_12G_16G_TX_GENCTRL2,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY Tx General 2 Register" rbitfld.word 0x4 14.--15. "TX3_WIDTH,Reserved" "0,1,2,3" newline rbitfld.word 0x4 12.--13. "TX2_WIDTH,Reserved" "0,1,2,3" newline rbitfld.word 0x4 10.--11. "TX1_WIDTH,Reserved" "0,1,2,3" newline bitfld.word 0x4 8.--9. "TX0_WIDTH,Tx Datapath Width on lane 0 of the PHY This field controls the width of input transmit data on lane 0." "0,1,2,3" newline rbitfld.word 0x4 5.--7. "TX_LPD_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 4. "TX_LPD_0,Transmitter Lane Power Down on lane 0 of PHY This field drives the output 'xpcs_tx_lpd_o[3:1]'." "0,1" newline rbitfld.word 0x4 1.--3. "TX_REQ_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 0. "TX_REQ_0,Transmitter operation request on lane 0 of E12G/E16G PHY (RW SC Type) This bit drives the output port 'xpcs_tx_req_o[0]." "0,1" line.word 0x6 "VR_XS_PMA_MP_12G_16G_25G_TX_BOOST_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx Boost Control Register" hexmask.word.byte 0x6 12.--15. 1. "TX3_IBOOST,Reserved" newline hexmask.word.byte 0x6 8.--11. 1. "TX2_IBOOST,Reserved" newline hexmask.word.byte 0x6 4.--7. 1. "TX1_IBOOST,Reserved" newline hexmask.word.byte 0x6 0.--3. 1. "TX0_IBOOST,Tx current boost level on lane 0 of the PHY This bit drives the output port xpcs_tx0_iboost_lvl_o[3:0]." line.word 0x8 "VR_XS_PMA_MP_12G_16G_25G_TX_RATE_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx Rate Control Register" rbitfld.word 0x8 12.--14. "TX3_RATE,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0x8 8.--10. "TX2_RATE,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0x8 4.--6. "TX1_RATE,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x8 0.--2. "TX0_RATE,." "0,1,2,3,4,5,6,7" line.word 0xA "MP_12G_16G_25G_TX_POWER_STATE_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx Power State Register" rbitfld.word 0xA 9.--11. "TX_DISABLE_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0xA 8. "TX_DISABLE_0,Transmitter Disable on lane 0 This field drives the output port 'xpcs_tx_disable_o[0]'." "0,1" newline rbitfld.word 0xA 6.--7. "TX3_PSTATE,Reserved" "0,1,2,3" newline rbitfld.word 0xA 4.--5. "TX2_PSTATE,Reserved" "0,1,2,3" newline rbitfld.word 0xA 2.--3. "TX1_PSTATE,Reserved" "0,1,2,3" newline bitfld.word 0xA 0.--1. "TX0_PSTATE,Tx power state control for lane 0 of PHY Power state encoding is as follows: - 2'b00: P0 - 2'b01: P0s - 2'b10: P1 - 2'b11: P2" "0: P0,1: P0s,2: P1,3: P2" line.word 0xC "VR_XS_PMA_MP_12G_16G_25G_TX_EQ_CTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx Equalization Control 0 Register" hexmask.word.byte 0xC 8.--13. 1. "TX_EQ_MAIN,." newline hexmask.word.byte 0xC 0.--5. 1. "TX_EQ_PRE,Tx Pre-Emphasis level adjustment Control This field controls the transmitter driver output pre-emphasis (pre-shoot coefficient)." line.word 0xE "VR_XS_PMA_MP_12G_16G_25G_TX_EQ_CTRL1,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx Equalization Control 1 Register" rbitfld.word 0xE 8. "CA_TX_EQ,Reserved" "0,1" newline rbitfld.word 0xE 7. "TX_EQ_DEF_CTRL,Reserved" "0,1" newline rbitfld.word 0xE 6. "TX_EQ_OVR_RIDE,Reserved" "0,1" newline hexmask.word.byte 0xE 0.--5. 1. "TX_EQ_POST,Tx Post-Emphasis level adjustment Control This field controls the transmitter driver output pre-emphasis (pre-shoot coefficient)." group.word 0x10078++0x5 line.word 0x0 "VR_XS_PMA_MP_16G_25G_TX_GENCTRL3,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY TX General Control 3 Register" hexmask.word 0x0 0.--8. 1. "TXUP_TERM_OFFSET,Offset for TX Up Termination." line.word 0x2 "VR_XS_PMA_MP_16G_25G_TX_GENCTRL4,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY TX General Control 4 Register" hexmask.word 0x2 0.--8. 1. "TXDN_TERM_OFFSET,Offset for TX Down Termination." line.word 0x4 "VR_XS_PMA_MP_16G_25G_TX_MISC_CTRL0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY TX Miscellaneous Control 0 Register" hexmask.word.byte 0x4 8.--15. 1. "TX1_MISC,Reserved" newline hexmask.word.byte 0x4 0.--7. 1. "TX0_MISC,TX Miscellaneous control for lane0." rgroup.word 0x10080++0x1 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_TX_STS,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Tx Status Register" bitfld.word 0x0 5.--7. "DETRX_RSLT_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "DETRX_RSLT_0,Receiver Detection Result on lane 0 of PHY This field captures the value of the input port 'xpcs_tx_detrx_result_i[0]'." "0,1" newline bitfld.word 0x0 1.--3. "TX_ACK_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "TX_ACK_0,Tx Acknowledge on lane 0 of PHY This bit captures the value of the input port 'xpcs_tx_ack_i[0]'." "0,1" group.word 0x100A0++0x11 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_RX_GENCTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx General Control 0 Register" rbitfld.word 0x0 13.--15. "RX_CLKSFT_3_1,Rx clock shift on Lanes[3:1] of Multi-protocol 12G PHY When these bits are set a 1-bit shift of receive data happens relate to receive clock." "?,1: bit shift of receive data happens relate to..,?,?,?,?,?,?" newline rbitfld.word 0x0 12. "RX_CLKSFT_0,Rx clock shift on lane 0 of Multi-protocol 12G PHY When this bit is set a 1-bit shift of receive data happens relate to receive clock." "?,1: bit shift of receive data happens relate to.." newline rbitfld.word 0x0 9.--11. "RX_DT_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 8. "RX_DT_EN_0,Rx Data Enable on lane 0 of PHY Set this bit to enable the PHY receiver data output on lane 0." "0,1" newline rbitfld.word 0x0 5.--7. "RX_ALIGN_EN_3_1,Rx Data Alignment Enable on Lanes[3:1] of Multi-protocol 12G PHY These bits can be set to enable word alignment (based on k28." "0,1,2,3,4,5,6,7" newline rbitfld.word 0x0 4. "RX_ALIGN_EN_0,Rx Data Alignment Enable on lane 0 of Multi-protocol 12G PHY This bit can be set to enable word alignment (based on k28." "0,1" newline rbitfld.word 0x0 1.--3. "RX_TERM_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "RX_TERM_EN_0,Rx Termination Enable on lane 0 of PHY When this bit is set PHY Rx is terminated with a nominal 50 ohm resistance." "0,1" line.word 0x2 "MP_12G_16G_25G_RX_GENCTRL1,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx General Control 1 Register" rbitfld.word 0x2 13.--15. "RX_DIV16P5_CLK_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 12. "RX_DIV16P5_CLK_EN_0,Receiver Divide by 16." "0,1" newline rbitfld.word 0x2 9.--11. "RX_TERM_ACDC_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 8. "RX_TERM_ACDC_0,Rx Termination control on lane 0 of PHY." "0,1" newline rbitfld.word 0x2 5.--7. "RX_RST_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 4. "RX_RST_0,." "0,1" newline rbitfld.word 0x2 1.--3. "RX_INV_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 0. "RX_INV_0,Rx Data Invert on lane 0 of PHY When this bit is set the data on PHY Rx serial lines are logically inverted." "0,1" line.word 0x4 "VR_XS_PMA_MP_12G_16G_RX_GENCTRL2,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY Rx General Control 2 Register" rbitfld.word 0x4 14.--15. "RX3_WIDTH,Reserved" "0,1,2,3" newline rbitfld.word 0x4 12.--13. "RX2_WIDTH,Reserved" "0,1,2,3" newline rbitfld.word 0x4 10.--11. "RX1_WIDTH,Reserved" "0,1,2,3" newline bitfld.word 0x4 8.--9. "RX0_WIDTH,Rx Datapath Width on lane 0 of the PHY This field controls the width of output receive data from PHY on lane 3." "0,1,2,3" newline rbitfld.word 0x4 5.--7. "RX_LPD_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 4. "RX_LPD_0,Receiver Lane Power Down on lane 0 of PHY This bit can be set to power down the receiver to a power state equivalent to that of P1." "0,1" newline rbitfld.word 0x4 1.--3. "RX_REQ_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 0. "RX_REQ_0,Receiver operation request on lane 0 of PHY (RW SC Type)." "0,1" line.word 0x6 "VR_XS_PMA_MP_12G_16G_RX_GENCTRL3,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY Rx General Control 3 Register" rbitfld.word 0x6 13.--15. "LOS_LFPS_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x6 12. "LOS_LFPS_EN_0,Rx LOS LFPS Enable on lane 0 of the PHY This field drives the output port xpcs_rx_los_lfps_en_o[0] to enable the LFPS filter on lane 0 of the PHY." "0,1" newline rbitfld.word 0x6 9.--11. "LOS_TRSHLD_3,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0x6 6.--8. "LOS_TRSHLD_2,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0x6 3.--5. "LOS_TRSHLD_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x6 0.--2. "LOS_TRSHLD_0,Loss of signal threshold on lane 0 of PHY." "0,1,2,3,4,5,6,7" line.word 0x8 "VR_XS_PMA_MP_12G_16G_25G_RX_RATE_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx Rate Control Register" rbitfld.word 0x8 12.--13. "RX3_RATE,Reserved" "0,1,2,3" newline rbitfld.word 0x8 8.--9. "RX2_RATE,Reserved" "0,1,2,3" newline rbitfld.word 0x8 4.--5. "RX1_RATE,Reserved" "0,1,2,3" newline bitfld.word 0x8 0.--1. "RX0_RATE,." "0,1,2,3" line.word 0xA "MP_12G_16G_25G_RX_POWER_STATE_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx Power State Register" bitfld.word 0xA 12. "EEE_OVR_RIDE,EEE_OVR_RIDE" "0,1" newline rbitfld.word 0xA 9.--11. "RX_DISABLE_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0xA 8. "RX_DISABLE_0,Receiver Disable on lane 0 This bit can be set in P1 power state to put the receiver in a low-power mode." "0,1" newline rbitfld.word 0xA 6.--7. "RX3_PSTATE,Reserved" "0,1,2,3" newline rbitfld.word 0xA 4.--5. "RX2_PSTATE,Reserved" "0,1,2,3" newline rbitfld.word 0xA 2.--3. "RX1_PSTATE,Reserved" "0,1,2,3" newline bitfld.word 0xA 0.--1. "RX0_PSTATE,Rx power state control for lane 0 of PHY Power state encoding is as follows: - 2'b00: P0 - 2'b01: P0s - 2'b10: P1 - 2'b11: P2" "0: P0,1: P0s,2: P1,3: P2" line.word 0xC "VR_XS_PMA_MP_12G_16G_25G_RX_CDR_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx CDR Control Register" rbitfld.word 0xC 9.--11. "VCO_LOW_FREQ_3_1,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0xC 8. "VCO_LOW_FREQ_0,Reserved" "0,1" newline rbitfld.word 0xC 5.--7. "CDR_SSC_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0xC 4. "CDR_SSC_EN_0,Rx CDR SSC Mode Enable on lane 0 of the PHY This field controls the CDR tracking gains and duration." "0,1" newline rbitfld.word 0xC 1.--3. "CDR_TRACK_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0xC 0. "CDR_TRACK_EN_0,Reserved" "0,1" line.word 0xE "VR_XS_PMA_MP_12G_16G_25G_RX_ATTN_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx Attenuation Control Register" rbitfld.word 0xE 12.--14. "RX3_EQ_ATT_LVL,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0xE 8.--10. "RX2_EQ_ATT_LVL,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0xE 4.--6. "RX1_EQ_ATT_LVL,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0xE 0.--2. "RX0_EQ_ATT_LVL,Rx Equalization Attenuation level for lane 0 of the PHY This field drives the output port xpcs_rx0_eq_att_lvl_o[2:0]." "0,1,2,3,4,5,6,7" line.word 0x10 "VR_XS_PMA_MP_16G_25G_RX_EQ_CTRL0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY Rx Equalization Control 0 Register" bitfld.word 0x10 12.--14. "VGA1_GAIN_0,Rx Equalization VGA1 Gain on lane 0 of the PHY This field drives the output port xpcs_rx0_eq_vga1_gain_o[3:0]." "0,1,2,3,4,5,6,7" newline bitfld.word 0x10 8.--10. "VGA2_GAIN_0,Rx Equalization VGA2 Gain on lane 0 of the PHY This field drives the output port xpcs_rx0_eq_vga2_gain_o[3:0]." "0,1,2,3,4,5,6,7" newline bitfld.word 0x10 5.--6. "CTLE_POLE_0,Rx Equalization CTLE Pole Value on lane 0 of the PHY This field drives the output port xpcs_rx0_eq_ctle_pole_o[1:0]." "0,1,2,3" newline hexmask.word.byte 0x10 0.--4. 1. "CTLE_BOOST_0,Rx Equalization CTLE Boost value on lane 0 of the PHY This field drives the output port xpcs_rx0_eq_ctle_boost_o[4:0]." group.word 0x100B8++0x5 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_RX_EQ_CTRL4,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx Equalization Control 4 Register" bitfld.word 0x0 12. "RX_AD_REQ,Receive Adaptation Request This bit drives the 'rpcs_krx_adapt_req_o' port." "0,1" newline rbitfld.word 0x0 11. "RX_EQ_STRT_CTRL,Reserved" "0,1" newline rbitfld.word 0x0 10. "SELF_MAIN_EN,Reserved" "0,1" newline rbitfld.word 0x0 9. "PING_PONG_EN,Reserved" "0,1" newline rbitfld.word 0x0 8. "SEQ_EQ_EN,Reserved" "0,1" newline rbitfld.word 0x0 5.--7. "CONT_OFF_CAN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "CONT_OFF_CAN_0,Receiver offset cancellation continuous operation on lane 0 This bit can be set if continuous receiver offset cancellation is required." "0,1" newline rbitfld.word 0x0 1.--3. "CONT_ADAPT_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "CONT_ADAPT_0,Receiver Adaptation Continuous Operation on lane 0 This bit can be set to enable continuous receiver adaptation in the PHY." "0,1" line.word 0x2 "VR_XS_PMA_MP_16G_25G_RX_EQ_CTRL5,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY Rx Equalization Control 5 Register" rbitfld.word 0x2 13.--15. "RX_AD_PROG_3_1,Receiver Adaptation in Progress -lanes 3 to 1 This field drives the output port xpcs_rx_adpt_in_prog_o[3:1]." "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 12. "RX_ADPT_PROG_0,Receiver Adaptation in Progress -lane 0 This field drives the output port xpcs_rx_adpt_in_prog_o[0]." "0,1" newline rbitfld.word 0x2 10.--11. "RX3_ADPT_MODE,Reserved" "0,1,2,3" newline rbitfld.word 0x2 8.--9. "RX2_ADPT_MODE,Reserved" "0,1,2,3" newline rbitfld.word 0x2 6.--7. "RX1_ADPT_MODE,Reserved" "0,1,2,3" newline bitfld.word 0x2 4.--5. "RX0_ADPT_MODE,RX Adaptation for lane0 This field drives the output port xpcs_rx0_adpt_mode_o[1:0]." "0,1,2,3" newline rbitfld.word 0x2 1.--3. "RX_ADPT_SEL_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 0. "RX_ADPT_SEL_0,Select Storage Bank for RX adaptation on Lane0 This field drives the output port xpcs_rx_adpt_sel_o[0]." "0,1" line.word 0x4 "VR_XS_PMA_MP_12G_16G_25G_DFE_TAP_CTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY DFE Tap Control 0 Register" hexmask.word.byte 0x4 8.--15. 1. "DFE_TAP1_1,Reserved" newline hexmask.word.byte 0x4 0.--7. 1. "DFE_TAP1_0,Rx Equalization DFE Tap1 value on lane 0 of the PHY This field drives the output port xpcs_rx0_eq_dfe_tap1_o[7:0]" rgroup.word 0x100C0++0x3 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_RX_STS,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Rx Status Register" bitfld.word 0x0 9.--11. "HF_SD_3_1,For Multi-protocol 25G PHY or Multi protocol 32G PHY or For Multi-protocol 10G Gen2 PHY configurations: High-frequency Signal Detect on lanes 1-3." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 8. "HF_SD_0,Multi-protocol 25G PHY or Multi-protocol 32G PHY or For Multi-protocol 10G Gen2 PHY configurations: High-frequency Signal Detect on lane 0." "0,1" newline bitfld.word 0x0 5.--7. "LF_SD_3_1,For Multi-protocol 25G PHY or Multi-protocol 32G PHY or Multi-protocol 10G Gen2 PHY configurations: Low-frequency Signal Detect on lanes 1-3." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "LF_SD_0,For Multi-protocol 25G PHY or Multi-protocol 32G PHY or Multi-protocol 10G Gen2 PHY configurations: Low-frequency Signal Detect on lane 0." "0,1" newline bitfld.word 0x0 1.--3. "RX_ACK_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "RX_ACK_0,Rx Acknowledge on lane 0 of PHY This bit captures the value of the input port xpcs_rx_ack_i[0]." "0,1" line.word 0x2 "VR_XS_PMA_MP_16G_25G_RX_PPM_STS0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY Rx PPM Status 0 Register" bitfld.word 0x2 15. "RX1_PPM_DRIFT_VLD,Reserved" "0,1" newline hexmask.word.byte 0x2 8.--13. 1. "RX1_PPM_DRIFT,Reserved" newline bitfld.word 0x2 7. "RX0_PPM_DRIFT_VLD,RX CDR PPM Drift Valid on lane0 This field is driven by the input port xpcs_rx0_ppm_drift_vld_i." "0,1" newline hexmask.word.byte 0x2 0.--5. 1. "RX0_PPM_DRIFT,RX CDR PPM Drift on lane0 This field is driven by the input port xpcs_rx0_ppm_drift_i[5:0]." group.word 0x100C8++0x3 line.word 0x0 "VR_XS_PMA_MP_16G_RX_CDR_CTRL1,VR XS or PMA Synopsys Multi-protocol 16G PHY Rx CDR Control1 Register" rbitfld.word 0x0 14.--15. "VCO_FRQBAND_3,Reserved" "0,1,2,3" newline rbitfld.word 0x0 12.--13. "VCO_FRQBAND_2,Reserved" "0,1,2,3" newline rbitfld.word 0x0 10.--11. "VCO_FRQBAND_1,Reserved" "0,1,2,3" newline bitfld.word 0x0 8.--9. "VCO_FRQBAND_0,RX CDR VCO Frequency Band lane0 This field drives the output port xpcs_vco_freqband0_o[1:0]." "0,1,2,3" newline rbitfld.word 0x0 5.--7. "VCO_STEP_CTRL_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "VCO_STEP_CTRL_0,RX_CDR VCO Step Control Lane 0 This field drives the output port xpcs_vco_step_ctrl_o[0]." "0,1" newline rbitfld.word 0x0 1.--3. "VCO_TEMP_COMP_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "VCO_TEMP_COMP_EN_0,RX_CDR VCO Temperature Compensation Enable Lane 0 This field drives the output port xpcs_vco_temp_comp_en_o[0]." "0,1" line.word 0x2 "VR_XS_PMA_MP_16G_25G_RX_PPM_CTRL0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY Rx PPM Control 0 Register" hexmask.word.byte 0x2 8.--12. 1. "RX1_CDR_PPM_MAX,Reserved" newline hexmask.word.byte 0x2 0.--4. 1. "RX0_CDR_PPM_MAX,Maximum Allowed PPM on the RX0 CDR Clock This field drives the output port xpcs_rx0_cdr_ppm_max_o[4:0]." group.word 0x100D0++0x3 line.word 0x0 "VR_XS_PMA_MP_16G_25G_RX_GENCTRL4,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY Rx General Control 4 Register" rbitfld.word 0x0 13.--15. "RX_125MHZ_CLK_EN_3_1,RX 125MHz clock generation Enable on Lane 3 to 1 This field drives the output port xpcs_rx_125mhz_clk_en_o[3:1]." "0,1,2,3,4,5,6,7" newline rbitfld.word 0x0 12. "RX_125MHZ_CLK_EN_0,RX 125MHz clock generation Enable on Lane 0 This field drives the output port xpcs_rx_125mhz_clk_en_o[0]." "0,1" newline rbitfld.word 0x0 9.--11. "RX_DFE_BYP_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 8. "RX_DFE_BYP_0,RX DFE Bypass Enable on Lane 0 This field drives the output port xpcs_rx_dfe_bypass_o[0]." "0,1" newline hexmask.word.byte 0x0 0.--4. 1. "RX_TERM_OFFSET,Offset for RX Termination This field drives the output port xpcs_rx_term_offset_o[4:0]." line.word 0x2 "VR_XS_PMA_MP_16G_25G_RX_MISC_CTRL0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY RX Miscellaneous Control 0 Register" hexmask.word.byte 0x2 8.--15. 1. "RX1_MISC,Reserved" newline hexmask.word.byte 0x2 0.--7. 1. "RX0_MISC,RX Miscellaneous control for lane0." group.word 0x100D6++0x1 line.word 0x0 "VR_XS_PMA_MP_16G_25G_RX_IQ_CTRL0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY RX IQ Control 0 Register" hexmask.word.byte 0x0 8.--11. 1. "RX0_DELTA_IQ,RX IQ Offset Value for lane0." newline hexmask.word.byte 0x0 0.--6. 1. "RX0_MARGIN_IQ,Value of RX IQ Margining on lane0." group.word 0x100E0++0x19 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_MPLL_CMN_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY MPLL Common Control Register" rbitfld.word 0x0 5.--7. "MPLLB_SEL_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "MPLLB_SEL_0,Tx MPLLB Select-lane 0 When this bit is set Multi-protocol 12G/16G/25G PHYs select MPLLB to generate Tx analog clocks on lane 0" "0,1" newline rbitfld.word 0x0 1.--3. "MPLL_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "MPLL_EN_0,Tx MPLL Enable-lane 0 Set this bit to power-up the MPLL." "0,1" line.word 0x2 "VR_XS_PMA_MP_12G_16G_MPLLA_CTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY MPLLA Control 0 Register" bitfld.word 0x2 15. "MPLLA_CAL_DISABLE,MPLLA Calibration Disable This field can be programmed to 1 to disable calibration of MPLLA by PHY firmware." "0,1" newline rbitfld.word 0x2 14. "PMIX_EN,Reserved" "0,1" newline rbitfld.word 0x2 13. "FR_CFG_UP_EN,Reserved" "0,1" newline rbitfld.word 0x2 12. "FRAC_EN,Reserved" "0,1" newline rbitfld.word 0x2 8.--10. "MPLLA_SSC_CLK_SEL,This field controls MPLLA spread-spectrum clock select of Multi-protocol 10G Gen1 PHY." "0,1,2,3,4,5,6,7" newline hexmask.word.byte 0x2 0.--7. 1. "MPLLA_MULTIPLIER,MPLLA frequency Multiplier Control This field controls the multiplication of reference clock to a frequency suitable for operating speed." line.word 0x4 "VR_XS_PMA_MP_16G_MPLLA_CTRL1,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLA Control 1 Register" hexmask.word 0x4 5.--15. 1. "MPLLA_FRACN_CTRL,MPLLA Fractional Control This field drives the output port xpcs_mplla_fracn_ctrl_o." newline bitfld.word 0x4 4. "MPLLA_SSC_CLK_SEL,MPLLA SSC Clock Select This field drives the output port xpcs_mplla_ssc_clk_sel_o." "0,1" newline bitfld.word 0x4 0. "MPLLA_SSC_EN,MPLLA SSC Enable This field can be set to enable spread-spectrum generation on mplla_div_clk output." "0,1" line.word 0x6 "VR_XS_PMA_MP_12G_16G_MPLLA_CTRL2,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY MPLLA Control 2 Register" rbitfld.word 0x6 15. "MPLLA_WRD_DIV2_EN,MPLLA Word Clock Divide by 2 This field controls the xpcs_mplla_word_div2_en_o port." "0,1" newline bitfld.word 0x6 13.--14. "MPLLA_RECAL_BANK_SEL,MPLLA Re-calibration Bank Select This field drives the output port 'xpcs_mplla_recal_bank_sel_o [1:0]'." "0,1,2,3" newline bitfld.word 0x6 11.--12. "MPLLA_TX_CLK_DIV,MPLLA Tx Clock Divider This field drives the output port 'xpcs_mplla_tx_clk_div_o[1:0]'." "0,1,2,3" newline bitfld.word 0x6 10. "MPLLA_DIV16P5_CLK_EN,MPLLA Divide by 16." "0,1" newline bitfld.word 0x6 9. "MPLLA_DIV10_CLK_EN,MPLLA Divide by 10 Enable When this bit is set the frequency of the mplla_word_clk output clock from PHY is MPLLA frequency divided by 10." "0,1" newline bitfld.word 0x6 8. "MPLLA_DIV8_CLK_EN,MPLLA Divide by 8 Enable When this bit is set the frequency of the mplla_word_clk output clock from PHY is MPLLA frequency divided by 8." "0,1" newline bitfld.word 0x6 7. "MPLLA_DIV_CLK_EN,Enable mplla_div_clk from PHY." "0,1" newline hexmask.word.byte 0x6 0.--6. 1. "MPLLA_DIV_MULT,." line.word 0x8 "VR_XS_PMA_MP_12G_16G_MPLLB_CTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY MPLLB Control 0 Register" bitfld.word 0x8 15. "MPLLB_CAL_DISABLE,MPLLB Calibration Disable This field can be programmed to 1 to disable calibration of MPLLB by PHY firmware." "0,1" newline rbitfld.word 0x8 14. "PMIX_EN,Reserved" "0,1" newline rbitfld.word 0x8 13. "FR_CFG_UP_EN,Reserved" "0,1" newline rbitfld.word 0x8 12. "FRAC_EN,Reserved" "0,1" newline rbitfld.word 0x8 8.--10. "MPLLB_SSC_CLK_SEL,This field controls MPLLB spread-spectrum clock select of Multi-protocol 10G Gen1 PHY." "0,1,2,3,4,5,6,7" newline hexmask.word.byte 0x8 0.--7. 1. "MPLLB_MULTIPLIER,MPLLB frequency Multiplier Control This field controls the multiplication of reference clock to a frequency suitable for operating speed." line.word 0xA "VR_XS_PMA_MP_16G_MPLLB_CTRL1,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLB Control 1 Register" hexmask.word 0xA 5.--15. 1. "MPLLB_FRACN_CTRL,MPLLB Fractional Control This field drives the output port 'xpcs_mpllb_fracn_ctrl_o'." newline bitfld.word 0xA 4. "MPLLB_SSC_CLK_SEL,MPLLB Spread Spectrum Clock Select This field drives the output port 'xpcs_mpllb_ssc_clk_sel_o'" "0,1" newline bitfld.word 0xA 0. "MPLLB_SSC_EN,MPLLB Spread Spectrum Enable This field can be set to enable spread-spectrum generation on mpllb_div_clk output." "0,1" line.word 0xC "VR_XS_PMA_MP_12G_16G_MPLLB_CTRL2,VR XS or PMA Synopsys Multi-protocol 12G/16G PHY MPLLB Control 2 Register" bitfld.word 0xC 13.--14. "MPLLB_RECAL_BANK_SEL,MPLLB Re-calibration Bank Select This field drives the output port 'xpcs_mpllb_recal_bank_sel_o [1:0]'." "0,1,2,3" newline bitfld.word 0xC 11.--12. "MPLLB_TX_CLK_DIV,." "0,1,2,3" newline bitfld.word 0xC 9. "MPLLB_DIV10_CLK_EN,MPLLB Divide by 10 Enable When this bit is set the frequency of the mpllb_word_clk output clock from PHY is MPLLB frequency divided by 10." "0,1" newline bitfld.word 0xC 8. "MPLLB_DIV8_CLK_EN,MPLLB Divide by 8 Enable When this bit is set the frequency of the mpllb_word_clk output clock from PHY is MPLLB frequency divided by 8." "0,1" newline bitfld.word 0xC 7. "MPLLB_DIV_CLK_EN,Enable mpllb_div_clk from PHY When asserted the frequency of mpllb_div_clk output from PHY is MPLLB frequency divided by 'mpllb_div_multiplier'" "0,1" newline hexmask.word.byte 0xC 0.--6. 1. "MPLLB_DIV_MULT,." line.word 0xE "VR_XS_PMA_MP_16G_MPLLA_CTRL3,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLA Control 3 Register" hexmask.word 0xE 0.--15. 1. "MPLLA_BANDWIDTH,MPLLA Bandwidth Control This field controls the bandwidth of MPLLA present in Multi-protocol 16G PHY." line.word 0x10 "VR_XS_PMA_MP_16G_MPLLB_CTRL3,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLB Control 3 Register" hexmask.word 0x10 0.--15. 1. "MPLLB_BANDWIDTH,MPLLB Bandwidth Control This field controls the bandwidth of MPLLB present in Multi-protocol 16G PHY." line.word 0x12 "VR_XS_PMA_MP_16G_MPLLA_CTRL4,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLA Control 4 Register" hexmask.word 0x12 0.--11. 1. "MPLLA_SSC_FRQ_CNT_INT,MPLLA SSC Frequency Counter Initialization." line.word 0x14 "VR_XS_PMA_MP_16G_MPLLA_CTRL5,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLA Control 5 Register" bitfld.word 0x14 8. "MPLLA_SSC_SPD_EN,MPLLA SSC Up Spread Enable." "0,1" newline hexmask.word.byte 0x14 0.--7. 1. "MPLLA_SSC_FRQ_CNT_PK,MPLLA SSC Frequency Counter Peak." line.word 0x16 "VR_XS_PMA_MP_16G_MPLLB_CTRL4,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLB Control 4 Register" hexmask.word 0x16 0.--11. 1. "MPLLB_SSC_FRQ_CNT_INT,MPLLB SSC Frequency Counter Initialization." line.word 0x18 "VR_XS_PMA_MP_16G_MPLLB_CTRL5,VR XS or PMA Synopsys Multi-protocol 16G PHY MPLLB Control 5 Register" bitfld.word 0x18 8. "MPLLB_SSC_SPD_EN,MPLLB SSC Up Spread Enable." "0,1" newline hexmask.word.byte 0x18 0.--7. 1. "MPLLB_SSC_FRQ_CNT_PK,MPLLB SSC Frequency Counter Peak." group.word 0x10120++0x5 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_MISC_CTRL0,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Miscellaneous Control 0 Register" bitfld.word 0x0 15. "PLL_CTRL,PLL_CTRL" "0,1" newline bitfld.word 0x0 14. "CR_PARA_SEL,." "0,1" newline bitfld.word 0x0 13. "RTUNE_REQ,Resistor Tuning Request This bit can be set to trigger a resistor tune request to the PHY." "0,1" newline hexmask.word.byte 0x0 8.--12. 1. "RX_VREF_CTRL,Rx Biasing Current Control This field drives the output port 'xpcs_rx_vref_ctrl_o[4:0]'." newline rbitfld.word 0x0 5.--7. "RX2TX_LB_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "RX2TX_LB_EN_0,RX2TX_LB_EN_0" "0,1" newline rbitfld.word 0x0 1.--3. "TX2RX_LB_EN_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "TX2RX_LB_EN_0,Enable Analog Tx-to-Rx Serial Loopback on lane 0 This bit can be set to enable serial loopback in the PHY from Tx pre-driver to Rx analog front-end." "0,1" line.word 0x2 "VR_XS_PMA_MP_12G_16G_25G_REF_CLK_CTRL,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Reference Control Register" rbitfld.word 0x2 13.--15. "REF_MPLLB_DIV,For Multi-protocol 25G PHY or Multi-protocol 10G Gen2 PHY configurations: This field drives the xpcs_ref_clk_mpllb_div_o port." "0,1,2,3,4,5,6,7" newline rbitfld.word 0x2 10.--12. "REF_MPLLA_DIV,For Multi-protocol 25G PHY or Multi-protocol 10G Gen2 PHY configurations: This field drives the xpcs_ref_clk_mplla_div_o port." "0,1,2,3,4,5,6,7" newline rbitfld.word 0x2 9. "ALT_LP_CLK_SEL,Reserved" "0,1" newline bitfld.word 0x2 8. "REF_RPT_CLK_EN,Repeat Reference Clock Enable If this bit is set 'ref_repeat_clk_{p m}' clock from PHY is enabled." "0,1" newline bitfld.word 0x2 7. "REF_MPLLB_DIV2,MPLLB Reference Clock Divider Control The reference clock used for MPLLB calibration and locking can be divided by 2 by setting this bit to 1." "0,1" newline bitfld.word 0x2 6. "REF_MPLLA_DIV2,MPLLA Reference Clock Divider Control The reference clock used for MPLLA calibration and locking can be divided by 2 by setting this bit to 1." "0,1" newline bitfld.word 0x2 3.--5. "REF_RANGE,Input Reference Clock Range This field specifies the frequency range of the input reference clock (post ref_clk_div2_en division if any)." "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 2. "REF_CLK_DIV2,Reference Clock divide by 2 If this bit is set reference clock provided to PHY gets divided by 2 internally in the PHY." "0,1" newline bitfld.word 0x2 1. "REF_USE_PAD,." "0,1" newline bitfld.word 0x2 0. "REF_CLK_EN,Reference Clock Enable Set this bit to 1 to enable reference clock to the PHY." "0,1" line.word 0x4 "VR_XS_PMA_MP_12G_16G_25G_VCO_CAL_LD0,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY VCO Calibration Load 0 Register" hexmask.word 0x4 0.--12. 1. "VCO_LD_VAL_0,VCO_LD_VAL_0" group.word 0x1012C++0x1 line.word 0x0 "VR_XS_PMA_MP_16G_25G_VCO_CAL_REF0,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY VCO Calibration Reference 0 Register" hexmask.word.byte 0x0 8.--14. 1. "VCO_REF_LD_1,Reserved" newline hexmask.word.byte 0x0 0.--6. 1. "VCO_REF_LD_0,VCO_REF_LD_0" rgroup.word 0x10130++0x1 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_MISC_STS,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Miscellaneous Status Register" bitfld.word 0x0 12. "RX_ADPT_ACK,Receive Adaptation Acknowledgment from PHY." "0,1" newline bitfld.word 0x0 11. "REF_CLKDET_RESULT,REF_CLKDET_RESULT" "0,1" newline bitfld.word 0x0 10. "MPLLB_STS,Status of MPLLB from PHY This bit denotes the value of xpcs_mpllb_state_i input." "0,1" newline bitfld.word 0x0 9. "MPLLA_STS,Status of MPLLA from PHY." "0,1" newline bitfld.word 0x0 8. "RTUNE_ACK,Acknowledgment for Resistor Tune Request This bit denotes the value of 'xgxs_rtune_ack_i' input." "0,1" newline hexmask.word.byte 0x0 0.--7. 1. "FOM,Figure of merit output from the PHY is captured in this field." group.word 0x10132++0x7 line.word 0x0 "VR_XS_PMA_MP_12G_16G_25G_MISC_CTRL1,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY Miscellaneous Control 1 Register" hexmask.word 0x0 0.--15. 1. "RX_LNK_UP_TIME,RX_LNK_UP_TIME" line.word 0x2 "VR_XS_PMA_MP_12G_16G_25G_EEE_CTRL,." hexmask.word.byte 0x2 0.--7. 1. "MIN_QUIET_COUNT,Minimum Rx Quiet Duration" line.word 0x4 "VR_XS_PMA_MP_12G_16G_25G_SRAM,VR XS or PMA Synopsys Multi-protocol 12G/16G/25G PHY SRAM Register." rbitfld.word 0x4 2. "BTLD_BYP,SRAM Bootload Bypass." "0,1" newline bitfld.word 0x4 1. "EXT_LD_DN,SRAM External Loading Done." "0,1" newline rbitfld.word 0x4 0. "INIT_DN,SRAM Initialization Done." "0,1" line.word 0x6 "VR_XS_PMA_MP_16G_25G_MISC_CTRL2,VR XS or PMA Synopsys Multi-protocol 16G/25G PHY Miscellaneous Control 2 Register" bitfld.word 0x6 8. "REF_CLK_DET_EN,Reference Clock Detect enable." "0,1" newline hexmask.word.byte 0x6 0.--7. 1. "SUP_MISC,Support Miscellaneous Controls." group.word 0x10140++0x5 line.word 0x0 "VR_XS_PMA_SNPS_CR_CTRL,VR XS or PMA Synopsys PHY CR Control Register" bitfld.word 0x0 1. "WR_RDN,Write or Read Indicator This bit indicates whether a read or write operation is to be performed to the Synopsys PHY registers: - 0: Read - 1: Write" "0: Read,1: Write" newline bitfld.word 0x0 0. "START_BUSY,START_BUSY" "0,1" line.word 0x2 "VR_XS_PMA_SNPS_CR_ADDR,VR XS or PMA Synopsys PHY CR Address Register" hexmask.word 0x2 0.--15. 1. "ADDRESS,CR Port Address This field indicates the address of the register to be accessed through the CR port." line.word 0x4 "VR_XS_PMA_SNPS_CR_DATA,VR XS or PMA Synopsys CR Data Register" hexmask.word 0x4 0.--15. 1. "DATA,CR Port Data This field contains the data for CR Port access." tree.end tree "TCM_ECC_MCM" base ad:0x44420000 group.long 0x4++0x3 line.long 0x0 "TCMECCR,TCM ECC Control Register" bitfld.long 0x0 1. "RECC_DIS,Disable TCM ECC Read Check" "0: Enable ECC check on TCM read data,1: Disable ECC check on TCM read data" newline bitfld.long 0x0 0. "WECC_DIS,Disable TCM ECC Write Generation" "0: Enable ECC generation on TCM write data,1: Disable ECC generation on TCM write data" group.long 0x20++0xB line.long 0x0 "INT_STATUS,Interrupt Status Register" eventfld.long 0x0 13. "SYS_TCM_ECC_ERRS_INT,SYS_TCM access single-bit ECC Error Interrupt Status" "0: SYS_TCM single-bit ECC error does not happen,1: SYS_TCM single-bit ECC error happens." newline eventfld.long 0x0 12. "SYS_TCM_ECC_ERRM_INT,SYS_TCM access multi-bit ECC Error Interrupt Status" "0: SYS_TCM multi-bit ECC error does not happen,1: SYS_TCM multi-bit ECC error happens." newline eventfld.long 0x0 11. "CODE_TCM_ECC_ERRS_INT,CODE_TCM access single-bit ECC Error Interrupt Status" "0: CODE_TCM single-bit ECC error does not happen,1: CODE_TCM single-bit ECC error happens." newline eventfld.long 0x0 10. "CODE_TCM_ECC_ERRM_INT,CODE_TCM access multi-bit ECC Error Interrupt Status" "0: CODE_TCM multi-bit ECC error does not happen,1: CODE_TCM multi-bit ECC error happens." line.long 0x4 "INT_STAT_EN,Interrupt Status Enable Register" bitfld.long 0x4 13. "SYS_TCM_ERRS_INT_EN,SYS_TCM Access single bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 12. "SYS_TCM_ERRM_INT_EN,SYS_TCM Access multi bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 11. "CODE_TCM_ERRS_INT_EN,CODE_TCM Access single bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" newline bitfld.long 0x4 10. "CODE_TCM_ERRM_INT_EN,CODE_TCM Access multi bit ECC Error Interrupt Status Enable" "0: Masked,1: Enabled" line.long 0x8 "INT_SIG_EN,Interrupt Enable Register" bitfld.long 0x8 13. "SYS_TCM_ERRS_INT_SIG_EN,SYS_TCM Access single bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 12. "SYS_TCM_ERRM_INT_SIG_EN,SYS_TCM Access multi bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 11. "CODE_TCM_ERRS_INT_SIG_EN,CODE_TCM Access single bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" newline bitfld.long 0x8 10. "CODE_TCM_ERRM_INT_SIG_EN,CODE_TCM Access multi bit ECC Error Interrupt Signal Enable" "0: Masked,1: Enabled" rgroup.long 0x5C++0x7 line.long 0x0 "CODE_TCM_ECC_SINGLE_ERROR_INFO,CODE_TCM single-bit ECC Error Information Register" hexmask.long.byte 0x0 12.--18. 1. "CODE_TCM_ECCS_EFSYN,CODE_TCM single-bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--11. 1. "CODE_TCM_ECCS_EFPRT,CODE_TCM single-bit ECC error corresponding tcm_priv" newline hexmask.long.byte 0x0 4.--7. 1. "CODE_TCM_ECCS_EFMST,CODE_TCM single-bit ECC error corresponding tcm_master" newline bitfld.long 0x0 1.--3. "CODE_TCM_ECCS_EFSIZ,CODE_TCM single-bit ECC error corresponding TCM access size" "0,1,2,3,4,5,6,7" line.long 0x4 "CODE_TCM_ECC_SINGLE_ERROR_ADDR,CODE_TCM single-bit ECC Error Address Register" hexmask.long 0x4 0.--31. 1. "CODE_TCM_ECCS_ERRED_ADDR,CODE_TCM single-bit ECC error address" rgroup.long 0x68++0x7 line.long 0x0 "CODE_TCM_ECC_MULTI_ERROR_INFO,CODE_TCM multi-bit ECC Error Information Register" hexmask.long.byte 0x0 12.--18. 1. "CODE_TCM_ECCM_EFSYN,CODE_TCM multi-bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--11. 1. "CODE_TCM_ECCM_EFPRT,CODE_TCM multi-bit ECC error corresponding tcm_priv" newline hexmask.long.byte 0x0 4.--7. 1. "CODE_TCM_ECCM_EFMST,CODE_TCM multi-bit ECC error corresponding tcm_master" newline bitfld.long 0x0 1.--3. "CODE_TCM_ECCM_EFSIZ,CODE_TCM multi-bit ECC error corresponding TCM access size" "0,1,2,3,4,5,6,7" line.long 0x4 "CODE_TCM_ECC_MULTI_ERROR_ADDR,CODE_TCM multi-bit ECC Error Address Register" hexmask.long 0x4 0.--31. 1. "CODE_TCM_ECCM_ERRED_ADDR,CODE_TCM multi-bit ECC error address" rgroup.long 0x74++0x7 line.long 0x0 "SYS_TCM_ECC_SINGLE_ERROR_INFO,SYS_TCM single-bit ECC Error Information Register" hexmask.long.byte 0x0 12.--18. 1. "SYS_TCM_ECCS_EFSYN,SYS_TCM single-bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--11. 1. "SYS_TCM_ECCS_EFPRT,SYS_TCM single-bit ECC error corresponding tcm_priv" newline hexmask.long.byte 0x0 4.--7. 1. "SYS_TCM_ECCS_EFMST,SYS_TCM single-bit ECC error corresponding tcm_master" newline bitfld.long 0x0 1.--3. "SYS_TCM_ECCS_EFSIZ,SYS_TCM single-bit ECC error corresponding TCM access size" "0,1,2,3,4,5,6,7" line.long 0x4 "SYS_TCM_ECC_SINGLE_ERROR_ADDR,SYS_TCM single-bit ECC Error Address Register" hexmask.long 0x4 0.--31. 1. "SYS_TCM_ECCS_ERRED_ADDR,SYS_TCM single-bit ECC error address" rgroup.long 0x80++0x7 line.long 0x0 "SYS_TCM_ECC_MULTI_ERROR_INFO,SYS_TCM multi-bit ECC Error Information Register" hexmask.long.byte 0x0 12.--18. 1. "SYS_TCM_ECCM_EFSYN,SYS_TCM multi-bit ECC error corresponding syndrome" newline hexmask.long.byte 0x0 8.--11. 1. "SYS_TCM_ECCM_EFPRT,SYS_TCM multi-bit ECC error corresponding tcm_priv" newline hexmask.long.byte 0x0 4.--7. 1. "SYS_TCM_ECCM_EFMST,SYS_TCM multi-bit ECC error corresponding tcm_master" newline bitfld.long 0x0 1.--3. "SYS_TCM_ECCM_EFSIZ,SYS_TCM multi-bit ECC error corresponding TCM access size" "0,1,2,3,4,5,6,7" line.long 0x4 "SYS_TCM_ECC_MULTI_ERROR_ADDR,SYS_TCM multi-bit ECC Error Address Register" hexmask.long 0x4 0.--31. 1. "SYS_TCM_ECCM_ERRED_ADDR,SYS_TCM multi-bit ECC error address" group.long 0x94++0x7 line.long 0x0 "CODE_TCM_ECC_ERROR_INJEC,CODE_TCM ECC Error Injection Register" bitfld.long 0x0 19. "CODE_TCM_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on CODE_TCM write access" "0,1" newline bitfld.long 0x0 18. "CODE_TCM_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on CODE_TCM write access" "?,1: Bit Data Inversions" newline bitfld.long 0x0 17. "CODE_TCM_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on CODE_TCM write access" "0,1" newline bitfld.long 0x0 16. "CODE_TCM_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on CODE_TCM write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x0 8.--15. 1. "CODE_TCM_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error" newline hexmask.long.byte 0x0 0.--7. 1. "CODE_TCM_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection." line.long 0x4 "SYS_TCM_ECC_ERROR_INJEC,SYS_TCM ECC Error Injection Register" bitfld.long 0x4 19. "SYS_TCM_FRCNCI,Force Continuous Non-correctable Data Inversions (multi-bit ECC error) on SYS_TCM write access" "0,1" newline bitfld.long 0x4 18. "SYS_TCM_FRC1BI,Force Continuous 1-Bit Data Inversions (single-bit ECC error) on SYS_TCM write access" "?,1: Bit Data Inversions" newline bitfld.long 0x4 17. "SYS_TCM_FR1NCI,Force One Non-correctable Data Inversion(multi-bit ECC error) on SYS_TCM write access" "0,1" newline bitfld.long 0x4 16. "SYS_TCM_FR11BI,Force One 1-Bit Data Inversion(single-bit ECC error) on SYS_TCM write access" "?,1: Bit Data Inversion" newline hexmask.long.byte 0x4 8.--15. 1. "SYS_TCM_ERR2BIT,Bit position of the second bit to inject multi-bit ECC Error" newline hexmask.long.byte 0x4 0.--7. 1. "SYS_TCM_ERR1BIT,Bit position of the bit to inject ECC Error. Can be used for single-bit and multi-bit ECC Error injection" tree.end tree "USB3_GLUE" base ad:0x4C1F0000 group.long 0x0++0x7 line.long 0x0 "USB3_CTRL0,USB3 Controller Register 0" bitfld.long 0x0 31. "USB3_CTRL_RESET,Reset controller" "0: Do not reset the controller.,1: Resets the controller." newline bitfld.long 0x0 26. "DisRxDetU3RxDet,DisRxDetU3RxDet of USB 3.0 SS Ports" "0,1" newline bitfld.long 0x0 25. "StartRxDetU3RxDet,StartRxdetU3RxDet of USB 3.0 SS Ports" "0,1" newline bitfld.long 0x0 24. "UTMIOTG_IDDIG_SEL,IDDIG Source Select Signal" "0,1" newline bitfld.long 0x0 22.--23. "HUB_PORT_PERM_ATTACH,Hub Port Permanently Attached" "0: Not permanently attached,1: Permanently attached,?,?" newline hexmask.long.byte 0x0 16.--21. 1. "FLADJ_30MHZ_REG,HS Jitter Adjustment" newline bitfld.long 0x0 14. "xHC_BME,Disable Bus Mastering Capability of xHC" "0: Bus mastering capability is disabled. The host..,1: Bus mastering capability is enabled." newline bitfld.long 0x0 12. "HOST_PORT_POWER_CONTROL_PRESENT,Host Port Power Control" "0: Indicates that the port does not have port power..,1: Indicates that the port has port power switches." newline hexmask.long.byte 0x0 8.--11. 1. "BUS_FILTER_BYPASS,Bus Filter Bypass" newline bitfld.long 0x0 7. "HOST_U3_PORT_DISABLE,USB 3.0 SS Port Disable Control" "0: Port enabled,1: Port disabled" newline bitfld.long 0x0 6. "HOST_U2_PORT_DISABLE,USB 2.0 Port Disable Control" "0: Port enabled,1: Port disabled. This signal stops reporting.." newline bitfld.long 0x0 3. "PME_EN,PME Enable" "0: Disables PME generation.,1: Enables PME generation." newline bitfld.long 0x0 2. "BIGENDIAN_GS,Slave Big Endian Select (AHB/AXI/Native)" "0: Little endian,1: Big endian" newline bitfld.long 0x0 1. "BUS_CLKEN_GM,AHB/AXI/OCP Master Interface Clock Enable" "0: Disables clock.,1: Enables clock." newline bitfld.long 0x0 0. "BUS_CLKEN_GS,AHB/AXI/OCP Slave Interface Clock Enable" "0: Disables clock.,1: Enables clock." line.long 0x4 "USB3_CTRL1,USB3 Controller Register 1" bitfld.long 0x4 17. "POWER_POLARITY,Power Pin Polarity Control" "0: ipp_do_usb3_power takes effect when..,1: ipp_do_usb3_power takes effect when.." newline bitfld.long 0x4 16. "OC_POLARITY,OC Pin Polarity Control" "0: ipp_ind_usb3_overcurrent takes effect when it is..,1: ipp_ind_usb3_overcurrent takes effect when it is.." newline hexmask.long.byte 0x4 0.--4. 1. "OB_SEL,Observe Select" rgroup.long 0x10++0xB line.long 0x0 "USB3_DBG0,USB3 Debug Register 0" line.long 0x4 "USB3_DBG1,USB3 Debug Register 1" line.long 0x8 "USB3_DBG2,USB3 Debug Register 2" rgroup.long 0x20++0x3 line.long 0x0 "USB3_STS0,USB3 Status Register 0" bitfld.long 0x0 17.--19. "CLK_GATE_CTRL,Clock Gating Control" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 16. "DisRxDetU3RxDet_ACK,DisRxDetU3RxDet Acknowledgement" "0,1" newline bitfld.long 0x0 15. "IDDIG,IDDIG" "0: Connected plug is a mini-A plug.,1: Connected plug is a mini-B plug." newline bitfld.long 0x0 14. "PME_GENERATION,PME# Generation." "0,1" newline bitfld.long 0x0 13. "BC_CHIRP_ON,Chirp Signal Enable" "0,1" newline bitfld.long 0x0 12. "HOST_SYSTEM_ERR,Host System Error" "0,1" newline hexmask.long.word 0x0 0.--11. 1. "HOST_CURRENT_BELT,Current Belt Value" group.long 0x40++0x1B line.long 0x0 "PHY_CTRL0,USB PHY Control Register 0" hexmask.long.byte 0x0 25.--31. 1. "MPLL_MULTIPLIER,MPLL Frequency Multiplier Control" newline bitfld.long 0x0 24. "MPLL_REFSSC_CLK_EN,Double-Word Clock Enable" "0,1" newline bitfld.long 0x0 21.--23. "SSC_RANGE,Spread Spectrum Clock Range" "0: 4980,1: 4492,2: 4003,?,?,?,?,?" newline hexmask.long.word 0x0 12.--20. 1. "SSC_REF_CLK_SEL,Spread Spectrum Reference Clock Shifting" newline bitfld.long 0x0 11. "SSC_EN,Spread Spectrum Enable" "0,1" newline hexmask.long.byte 0x0 5.--10. 1. "FSEL,FSEL" newline bitfld.long 0x0 3.--4. "REFCLKSEL,Reference Clock Select for PLL Block" "0,1,2,3" newline bitfld.long 0x0 2. "REF_SSP_EN,Reference Clock Enable for SS Prescaler" "0,1" newline bitfld.long 0x0 1. "REF_CLKDIV2,Input Reference Clock Divider Control" "0,1" newline bitfld.long 0x0 0. "REF_USE_PAD,Reference clock Use Pad" "0,1" line.long 0x4 "PHY_CTRL1,USB PHY Control Register 1" bitfld.long 0x4 30. "TAC_APB_RESET_SW,TCA Reset SW Control" "0: TCA reset is disabled.,1: TCA reset is enabled." newline bitfld.long 0x4 29. "USB_DEV_POR,PoR as USB Device" "0,1" newline bitfld.long 0x4 28. "SYS_VBUSVALID_SW,System VBUS Valid" "0,1" newline bitfld.long 0x4 27. "SS_RXDET_DISABLE_ACK,SuperSpeed RxDetect Disable/Enable Acknowledge" "0,1" newline bitfld.long 0x4 26. "TYPEC_FLIP_INVERT,Flip Invert to Type-C PHY" "0,1" newline bitfld.long 0x4 25. "HSXCVREXTCTL0,HS Transceiver Asynchronous Control" "0: FS TX/RX path is selected.,1: HS TX/RX path is selected." newline bitfld.long 0x4 23.--24. "VDATREFTUNE0,Data Detect Voltage Adjustment" "0: + 10%,1: 0 (default),2: - 10%,3: - 20%" newline bitfld.long 0x4 21.--22. "CHRGSRCPUENB0,Charger Source Pull-Up Enable." "0: Charger source pull up is disabled.,1: Charger source pull up is enabled.,?,?" newline bitfld.long 0x4 20. "VDATDETENB,Battery Charging Attach/Connect Detection Enable" "0: Data detect voltage (CHG_DET) is disabled.,1: Data detect voltage (CHG_DET) is enabled." newline bitfld.long 0x4 19. "VDATSRCENB,Battery Charging Sourcing Select" "0: Data source voltage (VDAT_SRC) is disabled.,1: Data source voltage (VDAT_SRC) is enabled." newline bitfld.long 0x4 18. "CHRGSEL,Battery Charging Source Select" "0: Data source voltage (VDAT_SRC) is sourced onto..,1: Data source voltage (VDAT_SRC) is sourced onto.." newline bitfld.long 0x4 17. "DCDENB,Data Contact Detection Enable" "0: IDP_SRC current is disabled pull-down resistance..,1: IDP_SRC current is sourced onto DP<#> pull-down.." newline bitfld.long 0x4 16. "AUTORSMENB0,AutoResume Mode Enable." "0,1" newline bitfld.long 0x4 15. "RTUNE_REQ,Resistor Tune Request" "0,1" newline bitfld.long 0x4 14. "TEST_BURNIN,Test Burning" "0,1" newline bitfld.long 0x4 12.--13. "VATESTENB,Analog Test Voltage Enable" "0,1,2,3" newline bitfld.long 0x4 11. "PHY_TEST_POWERDOWN_HSP,Power Down HS in PHY" "0,1" newline bitfld.long 0x4 10. "PHY_TEST_POWERDOWN_SSP,Power Down SS in PHY" "0,1" newline bitfld.long 0x4 9. "LOOPBACKENB0,Loopback Enable" "0,1" newline hexmask.long.byte 0x4 4.--8. 1. "ACJT_LEVEL,1149.6 Receiver Sensitivity Level Control" newline bitfld.long 0x4 3. "ATERESET,When the USB 3" "0,1" newline bitfld.long 0x4 2. "RETENABLEN,Lowered Digital Supply" "0,1" newline bitfld.long 0x4 1. "COMMONONN,Common Block Power-Down Control" "0: In Suspend or Sleep mode the PLL block remains..,1: In Suspend or Sleep mode the PLL block is.." newline bitfld.long 0x4 0. "PHY_RESET,Core and State Machine Reset" "0,1" line.long 0x8 "PHY_CTRL2,USB PHY Control Register 2" bitfld.long 0x8 21.--22. "sys_vbusvalid_sel,PHY sys_vbusvalid input mux selection" "0: PHY pipe0_power_present,1: PHY VBUSVALID0 output,2: PHY OTGSESSLVD0 output (for device role),3: PHY_CTRL1[28] - sys_vbusvalid_sw (for flexibility)" newline bitfld.long 0x8 20. "RX1LOSLFPSEN,RX1 LOS LFPS Filter Enable" "0: Disables RX LOS LFPS filter.,1: Enables RX LOS LFPS filter." newline bitfld.long 0x8 19. "DRVVBUS_GF_EN,DRV VBUS Enable" "0: Disables Vbus.,1: Enables Vbus." newline bitfld.long 0x8 18. "REF_XO_EN,Crystal Oscillator Always On Enable" "0,1" newline bitfld.long 0x8 17. "REF_USE_XO,Use External Crystal Oscillator" "0,1" newline bitfld.long 0x8 16. "RX0LOSLFPSEN,RX0 LOS LFPS Filter Enable" "0: Disables RX LOS LFPS filter.,1: Enables RX LOS LFPS filter." newline bitfld.long 0x8 15. "REF_REPEAT_CLK_EN,Clock Repeater Buffer Enable" "0,1" newline bitfld.long 0x8 14. "UTMOTG_IDPULLUP,Analog ID Input Sample Enable" "0: IDN pin sampling is disabled and the IDDIG0..,1: IDN pin sampling is enabled and the IDDIG0.." newline bitfld.long 0x8 13. "TXBITSTUFFEN,TX Bit Stuff Enable" "0,1" newline bitfld.long 0x8 12. "TXBITSTUFFENH,TX Bit Stuff Enable High" "0,1" newline bitfld.long 0x8 11. "VBUSVLDEXTSEL,External VBUS Valid Indicator Select" "0: Internal Session Valid comparator is used.,1: VBUSVLDEXT<#> input is used." newline bitfld.long 0x8 10. "VBUSVLDEXT,External VBUS Valid Indicator" "0: VBUS<#> signal is not valid and the pull-up..,1: VBUS<#> signal is valid and the pull-up resistor.." newline bitfld.long 0x8 9. "OTGDISABLE,OTG Disable" "0,1" newline bitfld.long 0x8 8. "TXENABLEN,USB 1.1 Data Enable" "0: FSDATAEXT<#> and FSSE0EXT<#> are enabled.,1: FSDATAEXT<#> and FSSE0EXT<#> are disabled." newline bitfld.long 0x8 7. "FSXCVROWNER,UTMI+/Serial Interface Select" "0: Data on the D+ and D- lines is transmitted and..,1: TXENABLEN<#> FSDATAEXT<#> and FSSE0EXT<#> inputs.." newline bitfld.long 0x8 6. "FSSE0EXT,USB 1.1 Transmit Data" "0: D+ and D- lines are driven to a Differential 0.,1: D+ and D- lines are driven to a Differential 1." newline bitfld.long 0x8 5. "FSDATAEXT,USB 1.1 SE0 Generation" "0,1" newline bitfld.long 0x8 4. "BYPASSDMDATA,Bypass DM Data" "0,1" newline bitfld.long 0x8 3. "BYPASSDMEN,Bypass DM Enable" "0,1" newline bitfld.long 0x8 2. "BYPASSDPDATA,Bypass DP Data" "0,1" newline bitfld.long 0x8 1. "BYPASSDPEN,Bypass DP Enable" "0,1" newline bitfld.long 0x8 0. "BYPASSSEL,Bypass Select" "0,1" line.long 0xC "PHY_CTRL3,USB PHY Control Register 3" bitfld.long 0xC 29.--31. "TX_VBOOST_lvl,Tx Voltage Boost Level" "0: Corresponds to a launch amplitude of 0.88 V.,?,2: Corresponds to a launch amplitude of 1.04 V.,3: Corresponds to a launch amplitude of 1.12 V.,?,?,?,?" newline bitfld.long 0xC 26.--28. "LOS_BIAS,Loss-of-Signal Detector Threshold Level Control" "0: Invalid,1: 45 mV,2: 60 mV (default),3: 75 mV,4: 90 mV,5: 105 mV,6: 120 mV,7: 135 mV" newline hexmask.long.byte 0xC 22.--25. 1. "TXVREFTUNE,HS DC Voltage Level Adjustment" newline bitfld.long 0xC 20.--21. "TXRISETUNE,HS Transmitter Rise/Fall Time Adjustment" "0: + 3%,1: 0 (default),2: - 1%,3: - 3%" newline bitfld.long 0xC 18.--19. "TXRESTUNE,USB Source Impedance Adjustment" "0: + 2 Ohms,1: 0 (default),2: - 3 Ohms,3: - 4.5 Ohms" newline bitfld.long 0xC 17. "TXPREEMPPULSETUNE,HS Transmitter Pre-Emphasis Duration Control" "0: Long (default),1: Short" newline bitfld.long 0xC 15.--16. "TXPREEMPAMPTUNE,HS Transmitter Pre-Emphasis Current Control" "0: Disabled (default),1: 1x pre-emphasis current,2: 2x pre-emphasis current,3: 3x pre-emphasis current" newline bitfld.long 0xC 13.--14. "TXHSXVTUNE,Transmitter High-Speed Crossover Adjustment" "?,1: - 16 mV,2: + 14 mV,3: 0 (default)" newline hexmask.long.byte 0xC 9.--12. 1. "TXFSLSTUNE,FS/LS Source Impedance Adjustment" newline bitfld.long 0xC 6.--8. "SQRXTUNE,Squelch Threshold Adjustment" "0: + 16.07%,1: + 10.71%,2: + 5.36%,3: 0 (default),4: - 5.36%,5: - 10.71%,6: - 16.07%,7: - 22.32%" newline bitfld.long 0xC 3.--5. "OTGTUNE,VBUS Valid Threshold Adjustment" "0: - 14.5%,1: - 11.6%,2: - 8.7%,3: - 5.8%,4: - 2.9%,5: 0 (default),6: + 2.9%,7: + 5.8%" newline bitfld.long 0xC 0.--2. "COMPDISTUNE,Disconnect Threshold Adjustment" "0: - 9.01%,1: - 6.5%,2: - 3.04%,3: 0 (default),4: + 4.08%,5: + 7.52%,6: + 11.86%,7: + 15.54%" line.long 0x10 "PHY_CTRL4,USB PHY Control Register 4" hexmask.long.byte 0x10 27.--31. 1. "LANE0_TX_TERM_OFFSET,Transmitter Termination Offset." newline hexmask.long.byte 0x10 21.--26. 1. "PCS_TX_DEEMPH_6DB,TX De-Emphasis at 6 dB" newline hexmask.long.byte 0x10 15.--20. 1. "PCS_TX_DEEMPH_3P5DB,TX De-Emphasis at 3.5 dB" newline hexmask.long.word 0x10 5.--14. 1. "PCS_RX_LOS_MASK_VAL,Configurable Loss-of-Signal Mask Width" newline hexmask.long.byte 0x10 0.--4. 1. "LOS_LEVEL,Loss-of-Signal Detector Sensitivity Level Control." line.long 0x14 "PHY_CTRL5,USB PHY Control Register 5" bitfld.long 0x14 31. "USB2PHY_RESET_OVERRIDE_SEL,USB2PHY Reset Override Selection" "0: Select usb2phy reset value from core.,1: Select usb2phy reset value override from register." newline bitfld.long 0x14 30. "USB2PHY_RESET_OVERRIDE,USB2PHY Reset Override" "0: Do not reset PHY.,1: Reset PHY." newline bitfld.long 0x14 29. "DRVVBUS_OVERRIDE_SEL,Utmi Drv Vbus Value Override Selection" "0: Select utmi drv vbus value from core.,1: Select utmi drv vbus value override from register." newline bitfld.long 0x14 28. "DRVVBUS_OVERRIDE,Utmi Drv Vbus Override Value" "0: Do not reset drive vbus.,1: Reset drive vbus." newline bitfld.long 0x14 27. "SUSPEND_N_OVERRIDE_SEL,Utmi Suspend_n Value Override Selection" "0: Select suspend_n value from core.,1: Select suspend_n value override from register." newline bitfld.long 0x14 26. "SUSPEND_N_OVERRIDE,Utmi Suspend_n Value Override" "0: Do not put UTMI PHY in suspend mode.,1: Put UTMI PHY in suspend mode." newline bitfld.long 0x14 25. "SLEEP_N_OVERRIDE_SEL,Utmi Sleep_n Value Override Selection" "0: Select sleep_n value from core.,1: Select sleep_n value override from register." newline bitfld.long 0x14 24. "SLEEP_N_OVERRIDE,Utmi Sleep_n Value Override" "0: OTG core is in sleep mode.,1: OTG core is not in sleep mode." newline bitfld.long 0x14 23. "DMPULLDOWN_OVERRIDE_SEL,Utmi OTG Dm_pulldown Value Override Selection" "0: Select otg dm_pulldown override value from core.,1: Select otg dm_pulldown override value from.." newline bitfld.long 0x14 22. "DMPULLDOWN_OVERRIDE,Utmi OTG Dm_pulldown Value Override" "0: Disables OTG dm_pulldown.,1: Enables OTG dm_pulldown." newline bitfld.long 0x14 21. "DPPULLDOWN_OVERRIDE_SEL,Utmi OTG Dp_pulldown Value Override Selection" "0: Select otg dp_pulldown override value from core.,1: Select otg dp_pulldown override value from.." newline bitfld.long 0x14 20. "DPPULLDOWN_OVERRIDE,Utmi OTG Dp_pulldown Value Override" "0: Disables OTG dp_pulldown.,1: Enables OTG dp_pulldown." newline bitfld.long 0x14 19. "XCVRSEL_OVERRIDE_SEL,Utmi Xcvr Value Override Selection" "0: Select xcvrsel override value from core.,1: Select xcvrsel override value from register." newline bitfld.long 0x14 17.--18. "XCVRSEL_OVERRIDE,Utmi Xcvr Value Override" "0: Disables Utmi XCVR.,1: Enables Utmi XCVR.,?,?" newline bitfld.long 0x14 16. "OPMODE_OVERRIDE_SEL,Utmi Opmode Value Override Selection" "0: Select utmi opmode override value from core.,1: Select utmi opmode override value from register." newline bitfld.long 0x14 14.--15. "OPMODE_OVERRIDE,Utmi Opmode Value Override" "0: Disables Utmi opmode,1: Enables Utmi opmode.,?,?" newline bitfld.long 0x14 13. "PHY_TERMSEL_OVERRIDE_SEL,Utmi Term Select Value Override Selection" "0: Select utmi term select value from core.,1: Select utmi term select value from register." newline bitfld.long 0x14 12. "TERMSEL_OVERRIDE,Utmi Term Select Value Override" "0: Override value is 0.,1: Override value is 1." newline hexmask.long.byte 0x14 7.--11. 1. "LANE1_TX_TERM_OFFSET,Transmitter Termination Offset for Lane1" newline hexmask.long.byte 0x14 0.--6. 1. "PCS_TX_SWING_FULL,TX Amplitude (Full Swing Mode)" line.long 0x18 "PHY_CTRL6,USB PHY Control Register 6" bitfld.long 0x18 31. "TxOnesZeros_OVERRIDE_SEL,Pipe3_TxOnesZeros Value Override Selection" "0: Select pipe3_TxOnesZeros value from core.,1: Select pipe3_TxOnesZeros value from register." newline bitfld.long 0x18 30. "TxOnesZeros_OVERRIDE,Pipe3_TxOnesZeros Value Override" "0: Inactive,1: Active" newline bitfld.long 0x18 29. "RXTERMINATION_OVERRIDE_SEL,Pipe3_RxTermination Value Override Selection" "0: Select pipe3_RxTermination value from core.,1: Select pipe3_RxTermination value from register." newline bitfld.long 0x18 28. "RXTERMINATION_OVERRIDE,Pipe3_RxTermination Value Override" "0: Inactive,1: Active" newline bitfld.long 0x18 27. "POWERDOWN_OVERRIDE_SEL,Pipe3_PowerDown Value Override Selection" "0: Select pipe3_PowerDown value from core.,1: Select pipe3_PowerDown value from register." newline bitfld.long 0x18 25.--26. "PowerDown_OVERRIDE,Pipe3_PowerDown Value Override" "0: Inactive,1: Active,?,?" newline bitfld.long 0x18 24. "TxElecIdle_OVERRIDE_SEL,Pipe3_TxElecIdle Value Override Selection" "0: Select pipe3_TxElecIdle value from core.,1: Select pipe3_TxElecIdle value from register." newline bitfld.long 0x18 23. "TxElecIdle_OVERRIDE,Pipe3_TxElecIdle Value Override" "0: Inactive,1: Active" newline bitfld.long 0x18 22. "TxDetectRxLoopbk_OVERRIDE_SEL,Pipe3_TxDetectRxLoopbk Value Override Selection" "0: Select pipe3_TxDetectRxLoopbk value from core.,1: Select pipe3_TxDetectRxLoopbk value from register." newline bitfld.long 0x18 21. "TxDetectRxLoopbk_OVERRIDE,Pipe3_TxDetectRxLoopbk Value Override" "0: Inactive,1: Active" newline bitfld.long 0x18 20. "PIPE3_RESET_N_OVERRIDE_SEL,Pipe3_reset_n Value Override Selection" "0: Select pipe3_reset_n value from core.,1: Select pipe3_reset_n value from register." newline bitfld.long 0x18 19. "PIPE3_RESET_N_OVERRIDE,Pipe3_reset_n Value Override" "0: Resets pipe3 PHY.,1: Do not reset pipe3 PHY." newline bitfld.long 0x18 3. "LANE0_EXT_PCLK_REQ,External PIPE Clock Enable Request" "0,1" newline bitfld.long 0x18 2. "LANE0_TX2RX_LOOPBK,Loopback" "0,1" newline bitfld.long 0x18 1. "ALT_CLK_EN,Alternate Clock Enable" "0,1" newline bitfld.long 0x18 0. "ALT_CLK_SEL,Alternate Clock Source Select" "0: Uses internal MPLL clocks.,1: Uses alternate clocks." group.long 0x70++0x3 line.long 0x0 "PHY_CRCTL,no description available" bitfld.long 0x0 19. "CR_READ,CR Read" "0: Inactive,1: Active" newline bitfld.long 0x0 18. "CR_WRITE,PHY CR Write" "0: Inactive,1: Active" newline bitfld.long 0x0 17. "CR_CAP_DATA,PHY CR Capture Data" "0: Inactive,1: Active" newline bitfld.long 0x0 16. "CR_CAP_ADDR,PHY CR Capture Address" "0: Inactive,1: Active" newline hexmask.long.word 0x0 0.--15. 1. "CR_DATA_IN,PHY cr_data_in[15:0] CR Address and Write Data Input Bus" rgroup.long 0x74++0x3 line.long 0x0 "PHY_CRSR,no description available" bitfld.long 0x0 16. "CR_ACK,PHY CR Acknowledgment" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "CR_DATA_OUT,PHY CR Data Output Bus" group.long 0x80++0x3 line.long 0x0 "PHY_STATUS0,USB PHY Status Register 0" bitfld.long 0x0 31. "UTMI_CLK_VLD,UTMI Clock Valid" "0,1" newline bitfld.long 0x0 30. "PIPE_CLK_VLD,Pipe 3 Clock Valid" "0,1" newline rbitfld.long 0x0 22. "tca_drv_host_vbus,Type-C Host Drive VBUS From TCA" "0,1" newline rbitfld.long 0x0 21. "SSRXDETDIS,SuperSpeed RxDetect Disable/Enable Request" "0,1" newline rbitfld.long 0x0 20. "TCAIDDIG,Type-C OTG IDDIG Indication to USB Subsystem from TCA" "0,1" newline rbitfld.long 0x0 19. "BVALID,Session Valid for Peripheral" "0,1" newline rbitfld.long 0x0 18. "VBUSVALID,Vbus Valid" "0,1" newline rbitfld.long 0x0 16.--17. "LINESTATE,Realtime Linestate" "0,1,2,3" newline rbitfld.long 0x0 14.--15. "LINESTATE_DELAY,Linestate Delay" "0,1,2,3" newline rbitfld.long 0x0 7. "OTGSESSVLD,OTG Device Session Valid Indicator" "0: The voltage on VBUS is below the OTG Device..,1: The voltage on VBUS is above the OTG Device.." newline rbitfld.long 0x0 6. "RTUNE_ACK,Resistor Tune Acknowledge" "0,1" newline rbitfld.long 0x0 5. "REF_CLKREQ_N,Reference Clock Removal Acknowledge" "0,1" newline rbitfld.long 0x0 4. "CHGDET,Battery Charger Detection Output" "0: VDP < VDAT_REF (for CHRGSEL<#> = 1'b1) or VDM <..,1: VDP > VDAT_REF (for CHRGSEL<#> = 1'b1) or VDM >.." newline rbitfld.long 0x0 3. "FSVPLUS,Single-Ended D+ Indicator" "0: Voltage on D+ is low.,1: Voltage on D+ is high." newline rbitfld.long 0x0 2. "FSVMINUS,Single-Ended D- Indicator" "0: Voltage on D- is low.,1: Voltage on D- is high." newline rbitfld.long 0x0 1. "FSLSRCV,Differential Data Receive Indicator" "0: Voltage on D+ is less than the voltage on D-.,1: Voltage on D+ is greater than the voltage on D-." newline rbitfld.long 0x0 0. "PIPE0_POWER_PRESENT,PIPE Power Present" "0,1" tree.end tree "USB3_PHY" base ad:0x4C27C000 group.long 0x0++0xB line.long 0x0 "TCA_CLK_RST,TCA Block Clock and Reset Control Register" bitfld.long 0x0 9. "XA_RST_SW,X-bar Assist soft reset" "0: Soft reset is applied.,1: Soft reset is not applied" newline bitfld.long 0x0 8. "PHY_RST_SW,phy_reset SW override" "0: No phy_reset override,1: phy_reset is asserted (override on phy_reset.." newline bitfld.long 0x0 1. "TCA_REF_CLK_EN,TCA reference clock enable" "0: No request from TCA for ref_clk. ref_clk is is..,1: request from TCA for ref_clk to be enabled." newline bitfld.long 0x0 0. "SUSPEND_CLK_EN,Suspend clock enable" "0: PHY ref_clk_sel decides the tca_clk. If..,1: suspend_clk is used as the tca_clk" line.long 0x4 "TCA_INTR_EN,TCA Block Interrupt Enable Register" bitfld.long 0x4 12. "TCA_DRV_HOST_VBUS_EVT_EN,tca_drv_host_vbus change event enable" "0: Change event is disabled,1: Change event is enabled" newline bitfld.long 0x4 10. "TCA_VBUSVALID_EVT_EN,tca_vbusvalid change event enable" "0: Change event is disabled,1: Change event is enabled" newline bitfld.long 0x4 8. "SYS_VBUSVALID_EVT_EN,sys_vbusvalid change event enable" "0: Change event is disabled,1: Change event is enabled" newline bitfld.long 0x4 1. "XA_TIMEOUT_EVT_EN,X-bar Assist timeout event enable" "0: Timeout event is disabled,1: Timeout event is enabled" newline bitfld.long 0x4 0. "XA_ACK_EVT_EN,X-bar Assist ack event enable" "0: Ack event is disabled,1: Ack event is enabled" line.long 0x8 "TCA_INTR_STS,TCA Block Interrupt Status and Clear Register" rbitfld.long 0x8 13. "TCA_DRV_HOST_VBUS,tca_drv_host_vbus status/value as seen on TCA output." "0,1" newline eventfld.long 0x8 12. "TCA_DRV_HOST_VBUS_EVT,tca_drv_host_vbus change event status" "0: Change event has not occured (or been cleared..,1: Change event has has occurred with tca_int.." newline rbitfld.long 0x8 11. "TCA_VBUSVALID,tca_vbusvalid status/value as seen on TCA output." "0,1" newline eventfld.long 0x8 10. "TCA_VBUSVALID_EVT,tca_vbusvalid change event status" "0: Change event has not occured (or been cleared..,1: Change event has has occurred with tca_int.." newline rbitfld.long 0x8 9. "SYS_VBUSVALID,sys_vbusvalid status/value as seen on TCA input." "0,1" newline eventfld.long 0x8 8. "SYS_VBUSVALID_EVT,sys_vbusvalid change event status" "0: Change event has not occured (or been cleared..,1: Change event has occurred with tca_int interrupt.." newline eventfld.long 0x8 1. "XA_TIMEOUT_EVT,X-bar Assist timeout event status" "0: Timeout event has not occured (or been cleared..,1: Timeout event has occurred with tca_int interrup.." newline eventfld.long 0x8 0. "XA_ACK_EVT,X-bar Assist ack event" "0: Ack event has not occured (or been cleared when..,1: Ack event has occurred with tca_int interrupt.." group.long 0x10++0xB line.long 0x0 "TCA_GCFG,TCA Global Configuration Register" bitfld.long 0x0 4. "ROLE_HSTDEV,USB Host/Device Mode" "0: Default mode USB Subsystem is in DRP/Host mode.,1: Device mode operation USB Subsystem is in Device.." newline bitfld.long 0x0 0.--1. "OP_MODE,Type-C Mux operational mode" "0: Controller Synced Mode use TCA_TCPC Register for..,1: Controller Synced Mode use TCA_TCPC Register for..,2: System Configuration Mode use TCA_SYSMODE_CFG..,3: Controller Synced Mode use TCA_TCPC Register for.." line.long 0x4 "TCA_TCPC,TCA TCPC Register" bitfld.long 0x4 4. "TCPC_VALID,TCPC_VALID" "0,1" newline bitfld.long 0x4 3. "TCPC_LOW_POWER_EN,Control from TCPM to put the PHY in low power." "0: Standard operation,1: Disable PHY and use advanced low power strategy.." newline bitfld.long 0x4 2. "TCPC_CONNECTOR_ORIENTATION,Connector orientation from TCPM" "0: Normal (CC1=A5 CC2=B5 TX1=A2/A3 RX1=B10/B11)..,1: Flipped (CC2=A5 CC1=B5 TX1=B2/B3 RX1=A10/A11)" newline bitfld.long 0x4 0.--1. "TCPC_MUX_CONTROL,Mux control from TCPM controlling the behavior of the Type-C Combo PHY TypeC_MUX and TCA synchronization." "0: No connection (default),1: USB3.0 Connected,?,?" line.long 0x8 "TCA_SYSMODE_CFG,TCA Register for TypeC_MUX Direct Control" bitfld.long 0x8 3. "TYPEC_DISABLE,Drives the typec_disable input of the PHY." "0: Standard operation,1: Low power/'USB Safe State' operation" newline bitfld.long 0x8 2. "TYPEC_FLIP,Drives the typec_flip input of the PHY." "0: Normal (CC1=A5 CC2=B5 TX1=A2/A3 RX1=B10/B11)..,1: Flipped (CC2=A5 CC1=B5 TX1=B2/B3 RX1=A10/A11)" group.long 0x20++0xB line.long 0x0 "TCA_CTRLSYNCMODE_CFG0,Configuration Register 0 for Controller Synced Mode (FLD_OP_MODE = 2`b01)" bitfld.long 0x0 16. "AUTO_SAFE_STATE,Automatic safe state" "0: Transient Safe Mode is not used.,1: Transient Safe Mode is used asserting.." newline bitfld.long 0x0 8. "SS_HDSHK_REQ,Handshake mechanism with USB Controller" "0: Relies on 'USB Tx/Rx lanes reaching P3'.,1: Relies on ss_rxdet_disable_ack handshake along.." newline bitfld.long 0x0 3. "SSTX_DETRX_REQ_BLOCK_EN,When transitioning out of USB mode selects if sstx_detrx_req to PHY has to be blocked along with the ss_rxdet_disable request to controller." "0: Doesn't block sstx_detrx_req to PHY. Relies on..,1: Block sstx_detrx_req to PHY when.." line.long 0x4 "TCA_CTRLSYNCMODE_CFG1,Configuration Register 1 for Controller Synced Mode (FLD_OP_MODE = 2`b01)" hexmask.long.tbyte 0x4 0.--19. 1. "XA_TIMEOUT_VAL,X-bar Assist TCPC request timeout value" line.long 0x8 "TCA_CTRLSYNCMODE_DBG0,Debug Register 0 for Controller Synced Mode (FLD_OP_MODE = 2`b01)" bitfld.long 0x8 28.--29. "CTRL_IF_OVRRD_VAL,Override values for controller handshake signals when corresponding ctrl_if_ovvrd_en[N] is high" "0,1,2,3" newline bitfld.long 0x8 23.--24. "CTRL_IF_OVRRD_EN,Control if override enable" "0,1,2,3" newline hexmask.long.byte 0x8 15.--19. 1. "XA_REQ_COMPL_MULT,Multiplier value for xa_req_compl_cycles[15:0] status in TCA_CTRLSYNCMODE_DBG1 register" newline bitfld.long 0x8 14. "PSTATE_TIMEOUT_VAL,TCA_PSTATE Register values are captured at which specific moment" "0: Current values are shown.,1: Values captured at the moment when TCPC request.." newline bitfld.long 0x8 13. "PSTATE_SYNCED,tca_clk synchronized status in TCA_PSTATE register" "0: Status is not synchronized in tca_clk.,1: Status is synchronized in tca_clk" newline rbitfld.long 0x8 12. "XBAR_READY,xbar_ready status/value as driven by X-bar Assist to VBUS Assist (RU - read-only volatile)" "0,1" newline rbitfld.long 0x8 5. "SS_RXDETECT_DISABLE_ACK,ss_rxdetect_disable_ack status/value" "0,1" newline rbitfld.long 0x8 4. "SS_RXDETECT_DISABLE,ss_rxdetect_disable status/value" "0,1" rgroup.long 0x2C++0xB line.long 0x0 "TCA_CTRLSYNCMODE_DBG1,Debug Register 1 for Controller Synced Mode (FLD_OP_MODE = 2`b01)" bitfld.long 0x0 16. "XA_REQ_COMPL_CYCLES_OVERRUN,TCPC req completion cycles overrun" "0,1" newline hexmask.long.word 0x0 0.--15. 1. "XA_REQ_COMPL_CYCLES,TCPC req completion cycles" line.long 0x4 "TCA_PSTATE,TCA PSTATE Status Register" bitfld.long 0x4 4. "TX_CM_STATE,Tx CM state" "0,1" newline bitfld.long 0x4 3. "TX_STATE,Tx state" "0,1" newline bitfld.long 0x4 2. "RX_PLL_STATE,Rx PLL state" "0,1" newline bitfld.long 0x4 0.--1. "PIPE0_POWERDOWN,PIPE0 power down" "0,1,2,3" line.long 0x8 "TCA_GEN_STATUS,TCA General Status Register" bitfld.long 0x8 12. "USB_DEV_POR,USB device PoR" "0,1" newline bitfld.long 0x8 8. "REF_CLK_SEL,Reference clock select" "0,1" newline bitfld.long 0x8 4. "TYPEC_FLIP_INVERT,Type-C flip invert" "0,1" newline bitfld.long 0x8 3. "PHY_TYPEC_DISABLE,PHY Type-C disable" "0,1" newline bitfld.long 0x8 2. "PHY_TYPEC_FLIP,PHY Type-C flip" "0,1" group.long 0x40++0x3 line.long 0x0 "TCA_VBUS_CTRL,TCA VBus Assist Control Register" hexmask.long.byte 0x0 9.--14. 1. "TCA_MISC_CTRL,tca miscellaneous control" newline bitfld.long 0x0 8. "TCA_IDDIG,tca_iddig control" "0: Drive 0,1: Drive 1" newline bitfld.long 0x0 4.--5. "DRV_HOST_VBUS_OVERRD,tca_drv_host_vbus overdrive" "0: Drive 0,1: Drive 1,2: Drive 0,3: Use XBar_Assist sttes to drive tca_drv_host_vbus" newline bitfld.long 0x0 2.--3. "POWERPRESENT_OVERRD,tca_powerpresent override" "0: Drive 0,1: Drive 1,2: Follow sys_vbusvalid,3: Follow sys_vbusvalid with XBar_Assist associated.." newline bitfld.long 0x0 0.--1. "VBUSVALID_OVERRD,tca_vbusvalid override" "0: Drive 0,1: Drive 1,2: Follow sys_vbusvalid,3: Follow sys_vbusvalid with XBar_Assist associated.." rgroup.long 0x44++0x3 line.long 0x0 "TCA_VBUS_STATUS,TCA VBus Assist Status Register" bitfld.long 0x0 3. "TCA_DRV_HOST_VBUS,TCA drive host VBus" "0,1" newline bitfld.long 0x0 2. "TCA_POWERPRESENT,TCA power present" "0,1" newline bitfld.long 0x0 1. "TCA_VBUSVALID,TCA VBus valid" "0,1" newline bitfld.long 0x0 0. "SYS_VBUSVALID,System VBus valid" "0,1" rgroup.long 0xFC++0x3 line.long 0x0 "TCA_INFO,TCA Information Register for Version ID" hexmask.long 0x0 0.--31. 1. "VERSION_ID,Version ID for TCA" tree.end tree "VPU (Video Processing Unit Domain)" base ad:0x0 tree "VPU_BLK_CTRL_VPUMIX" base ad:0x4C410000 rgroup.long 0x0++0x7 line.long 0x0 "VPU_STATUS,Reflects the VPU_IDLE output pin of the VPU" bitfld.long 0x0 0. "VPU_IDLE,Reflects the VPU_IDLE output pin of the VPU" "0,1" line.long 0x4 "INIT_PENDING_TX,Status information from initiator NIU NoC that indicates if there are pending transaction in the NoC" bitfld.long 0x4 3. "JPEG_Decode,Status information from initiator NIU NoC that indicates if there are pending transaction in the NoC for JPEG Decode NIUs" "0,1" bitfld.long 0x4 2. "JPEG_Encode,Status information from initiator NIU NoC that indicates if there are pending transaction in the NoC for JPEN Encode NIUs" "0,1" bitfld.long 0x4 1. "VPU_Secondary,Status information from initiator NIU NoC that indicates if there are pending transaction in the NoC for VPU Secondary NIUs" "0,1" bitfld.long 0x4 0. "VPU_Primary,Status information from initiator NIU NoC that indicates if there are pending transaction in the NoC for VPU Primary NIUs" "0,1" group.long 0x8++0x3 line.long 0x0 "CLOCK_GATING_CONTROL,Gate a clock and its associated NIU" bitfld.long 0x0 2. "JPEG_DEC,Gate the JPEG DEC clock and its associated NIU" "0,1" bitfld.long 0x0 1. "JPEG_ENC,Gate the JPEG ENC clock and its associated NIU" "0,1" bitfld.long 0x0 0. "Wave_VPU,Gate the Wave IP clock and its associated NIUs" "0,1" tree.end tree "VPU_JPEG_DEC" base ad:0x4C500100 group.long 0x134++0x3 line.long 0x0 "CTRL,Control" bitfld.long 0x0 2. "GO,Go" "0: No effect,1: Enable" bitfld.long 0x0 1. "SWR,Soft Reset" "0: No effect,1: Enable" bitfld.long 0x0 0. "LP,Low Power" "0: No effect,1: Enable" tree.end tree "VPU_JPEG_DEC_WRAP" base ad:0x4C500000 group.long 0x0++0x3 line.long 0x0 "GLB_CTRL,Global Control" hexmask.long.byte 0x0 4.--7. 1. "SLOT_EN,Slots Enable" bitfld.long 0x0 3. "L_ENDIAN,Little Endian" "0: Disabled,1: Enabled" newline bitfld.long 0x0 2. "DEC_GO,Start Decoding" "0,1" bitfld.long 0x0 1. "SFTRST,Engine Soft Reset" "0: No effect,1: Soft reset" newline bitfld.long 0x0 0. "JPG_DEC_EN,JPEG Decoder and Wrapper Enable" "0: Disabled,1: Enabled" rgroup.long 0x4++0x3 line.long 0x0 "COM_STATUS,Common Status" bitfld.long 0x0 31. "DEC_ONGOING,Decoding Ongoing" "0,1" bitfld.long 0x0 29.--30. "CUR_SLOT,Current Slot" "0,1,2,3" group.long 0x14++0x1B line.long 0x0 "OUT_BUF_BASE0,Output Image Frame Buffer0 Base Address" hexmask.long 0x0 4.--31. 1. "OUT_BUF_BASE0,Pixel Frame Buffer0 Base" line.long 0x4 "OUT_BUF_BASE1,Output Image Frame Buffer1 Base Address" hexmask.long 0x4 4.--31. 1. "OUT_BUF_BASE1,Pixel Frame Buffer1 Base" line.long 0x8 "OUT_PITCH,Image Output Buffer Pitch" hexmask.long.word 0x8 0.--15. 1. "OUT_PITCH,Output Image Pitch" line.long 0xC "STM_BUFBASE,Input JPEG Stream Buffer Base Address" hexmask.long 0xC 4.--31. 1. "STM_BUFBASE,Bitstream Buffer Base" line.long 0x10 "STM_BUFSIZE,Input JPEG Stream Buffer Size" hexmask.long.tbyte 0x10 10.--31. 1. "STM_BUFSIZE,Bitstream Buffer Size" line.long 0x14 "IMGSIZE,Image Resolution" hexmask.long.word 0x14 16.--29. 1. "IMG_WIDTH,Image Width" hexmask.long.word 0x14 0.--13. 1. "IMG_HEIGHT,Image Height" line.long 0x18 "STM_CTRL,Bit Stream and Switching Control" bitfld.long 0x18 8. "AUTO_START,Auto Start" "0: Do not write 1 to [Go] bit of any CAST JPEG..,1: Writes 1 to [Go] bit of Cast JPEG Decoder.." bitfld.long 0x18 7. "BITBUF_PTR_CLR,Bit Buffer Pointer Clear" "0: Restores the bitstream buffer pointer to the..,1: Clears the current slot bitstream buffer pointer.." newline hexmask.long.byte 0x18 3.--6. 1. "IMAGE_FORMAT,Image Format" bitfld.long 0x18 2. "PIXEL_PRECISION,Pixel Precision" "0: 8-bit pixel precision,1: 12-bit pixel precision" tree.end tree "VPU_JPEG_ENC" base ad:0x4C550100 group.long 0x0++0x3 line.long 0x0 "MODE,Mode Control" bitfld.long 0x0 8. "AUTOCLR_GO,Auto Clear GO" "0,1" bitfld.long 0x0 7. "AUTOCLR_CONF,Auto Clear Configuration" "0,1" newline bitfld.long 0x0 6. "GO,Go" "0,1" bitfld.long 0x0 5. "CONF,Configuration" "0,1" newline bitfld.long 0x0 4. "EXTSEQ,Extended Sequential" "0,1" bitfld.long 0x0 3. "MS,Multi-scan JPEG" "0,1" newline bitfld.long 0x0 1. "SWR,Soft Reset" "0,1" bitfld.long 0x0 0. "LP,Low Power" "0,1" group.long 0x0++0x7 line.long 0x0 "STATUS_0,Status 0" hexmask.long.word 0x0 0.--15. 1. "X,Image width" line.long 0x4 "CFG_MODE,Configuration Mode Control" bitfld.long 0x4 10. "DICOM,Transmit all SOF0 and SOS markers after DQT and DHT markers to support DICOM format." "0,1" bitfld.long 0x4 9. "COMB_DHT,Combined Define Huffman Table" "0,1" newline bitfld.long 0x4 8. "COMB_DQT,Combined Define Quantization Table" "0,1" bitfld.long 0x4 7. "MCOM,Mask Comment" "0,1" newline bitfld.long 0x4 6. "MAPP,Mask Application" "0,1" bitfld.long 0x4 5. "MDNL,Mask Define Number of Lines" "0,1" newline bitfld.long 0x4 4. "MSOS,Mask Start Of Scan" "0,1" bitfld.long 0x4 3. "MDHT,Mask Define Huffman Table" "0,1" newline bitfld.long 0x4 2. "MDQT,Mask Define Quantization Table" "0,1" bitfld.long 0x4 1. "MDRI,Mask Define Restart Interval" "0,1" newline bitfld.long 0x4 0. "MSOF0,Mask Sequence Of Frame 0" "0,1" group.long 0x4++0x7 line.long 0x0 "STATUS_1,Status 1" hexmask.long.word 0x0 0.--15. 1. "Y,Image Height" line.long 0x4 "QUALITY,no description available" hexmask.long.byte 0x4 0.--6. 1. "QUALITY,Quality" group.long 0x8++0xB line.long 0x0 "STATUS_2,Status 2" hexmask.long.word 0x0 0.--15. 1. "HMCU,Horizontal Minimum Coded Unit" line.long 0x4 "STATUS_3,Status 3" hexmask.long.word 0x4 0.--15. 1. "VMCU,Vertical Minimum Coded Unit Rows" line.long 0x8 "RC_REGS_SEL,Indirect Status Register Select" bitfld.long 0x8 0.--1. "RC_REGS_SEL,Rate-Control Registers Select" "0,1,2,3" group.long 0x10++0x7 line.long 0x0 "STATUS_4,Status 4" hexmask.long.byte 0x0 8.--15. 1. "C0,Component 0" bitfld.long 0x0 5.--7. "H0,Horizontal 0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2.--4. "V0,Vertical 0" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--1. "Tq0,Table Quantization 0" "0,1,2,3" line.long 0x4 "LUMTH,Luminance Threshold" hexmask.long.word 0x4 0.--15. 1. "LUMTH,Luminance Threshold" group.long 0x14++0x7 line.long 0x0 "STATUS_5,Status 5" hexmask.long.byte 0x0 8.--15. 1. "C1,Component 1" bitfld.long 0x0 5.--7. "H1,Horizontal 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2.--4. "V1,Vertical 1" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--1. "Tq1,Table Quantization 1" "0,1,2,3" line.long 0x4 "CHRTH,Chrominance Threshold" hexmask.long.word 0x4 0.--15. 1. "CHRTH,Chrominance Threshold" group.long 0x18++0x2B line.long 0x0 "STATUS_6,Status 6" hexmask.long.byte 0x0 8.--15. 1. "C2,Component 2" bitfld.long 0x0 5.--7. "H2,Horizontal 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 2.--4. "V2,Vertical 2" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--1. "Tq2,Table Quantization 2" "0,1,2,3" line.long 0x4 "STATUS_7,Status 7" hexmask.long.byte 0x4 8.--15. 1. "C3,Component 3" bitfld.long 0x4 5.--7. "H3,Horizontal 3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 2.--4. "V3,Vertical 3" "0,1,2,3,4,5,6,7" bitfld.long 0x4 0.--1. "Tq3,Table Quantization 3" "0,1,2,3" line.long 0x8 "STATUS_8,Status 8" hexmask.long.byte 0x8 8.--15. 1. "QUALITY,Quality" hexmask.long.byte 0x8 0.--7. 1. "Nf,Number of Frame" line.long 0xC "STATUS_9,Status 9" hexmask.long.word 0xC 0.--15. 1. "DRI,Define Restart Interval" line.long 0x10 "STATUS_10,Status 10" hexmask.long.byte 0x10 12.--15. 1. "Hmax,Horizontal Maximum" hexmask.long.byte 0x10 8.--11. 1. "Vmax,Vertical Maximum" newline hexmask.long.byte 0x10 4.--7. 1. "NBMCU,Number Blocks Minimum Coded Unit" hexmask.long.byte 0x10 0.--3. 1. "Ns,Number of Scan" line.long 0x14 "STATUS_11,Status 11" hexmask.long.byte 0x14 12.--15. 1. "VHS3,Number of blocks of 4th component in MCU. VHS3=VHS2+V3*H3 if Ns=4" hexmask.long.byte 0x14 8.--11. 1. "VHS2,Number of blocks of 3rd component in MCU. VHS2=VHS1+V2*H2 if Ns>=3" newline hexmask.long.byte 0x14 4.--7. 1. "VHS1,Number of blocks of 2nd component in MCU. VHS1=VHS0+V1*H1 if Ns>=2" hexmask.long.byte 0x14 0.--3. 1. "VHS0,Number of blocks of 1st component in MCU. VHS0=V0*H0 if Ns>1. VHS0=1 if Ns=1" line.long 0x18 "STATUS_12,Status 12" bitfld.long 0x18 11. "SCANACTIVE,Scan Active" "0,1" bitfld.long 0x18 10. "PIXELIN_RDY,Pixel Input Ready" "0,1" newline bitfld.long 0x18 9. "JPEGIN_RDY,JPEG Input Ready" "0,1" bitfld.long 0x18 8. "CONFIGERROR,Configuration Error" "0,1" newline bitfld.long 0x18 7. "SOF_E,Sequence Of Frame" "0: No error,1: When an error in SOF0 segment is detected" bitfld.long 0x18 6. "SOS_E,Start Of Scan Error" "0: No error,1: When an error in SOS segment is detected" newline bitfld.long 0x18 5. "DQT_E,Define Quantization Table Error" "0: No error,1: When an error in DQT segment is detected" bitfld.long 0x18 4. "DHT_E,Define Huffman Table Error" "0: No error,1: When an error in DHT segment is detected" newline bitfld.long 0x18 3. "DNL_E,Define Number of Lines Error" "0: No error,1: When an error in DNL segment is detected" bitfld.long 0x18 2. "DRI_E,Define Restart Interval Error" "0: No error,1: When an error in DRI segment is detected" newline bitfld.long 0x18 1. "APPn_E,Application n Error" "0: No error,1: When an error in APPn segment is detected" bitfld.long 0x18 0. "COM_E,Comment Error" "0: No error,1: When an error in COM segment is detected" line.long 0x1C "STATUS_13,Status 13" hexmask.long.word 0x1C 0.--15. 1. "CFG_MODE,Configuration Mode" line.long 0x20 "STATUS_14,Status 14" hexmask.long.word 0x20 0.--15. 1. "RC_REGS0,Rate Control Register 0" line.long 0x24 "STATUS_15,Status 15" hexmask.long.word 0x24 0.--15. 1. "RC_REGS1,Rate Control Register 1" line.long 0x28 "NOMFRSIZE_LO,Nominal Frame Size Low" hexmask.long.word 0x28 0.--15. 1. "NOMFRSIZE_LO,Nominal Frame Size Low" group.long 0x40++0x7 line.long 0x0 "STATUS_16,Status 16" hexmask.long.word 0x0 0.--15. 1. "NOMFRSIZE_LO,Nominal Frame Size Low" line.long 0x4 "NOMFRSIZE_HI,Nominal Frame Size High" hexmask.long.word 0x4 0.--15. 1. "NOMFRSIZE_HI,Nominal Frame Size High" group.long 0x44++0x7 line.long 0x0 "STATUS_17,Status 17" hexmask.long.word 0x0 0.--15. 1. "NOMFRSIZE_HI,Nominal Frame Size High" line.long 0x4 "OFBSIZE_LO,FIFO Buffer Size Low" hexmask.long.word 0x4 0.--15. 1. "OFBSIZE_LO,FIFO Buffer Size Low" group.long 0x48++0x7 line.long 0x0 "STATUS_18,Status 18" hexmask.long.word 0x0 0.--15. 1. "OFBSIZE_LO,FIFO Buffer Size Low" line.long 0x4 "OFBSIZE_HI,FIFO Buffer Size High" hexmask.long.word 0x4 0.--15. 1. "OFBSIZE_HI,FIFO Buffer Size High" group.long 0x4C++0x3 line.long 0x0 "STATUS_19,Status 19" hexmask.long.word 0x0 0.--15. 1. "OFBSIZE_HI,FIFO Buffer Size High" tree.end tree "VPU_JPEG_ENC_WRAP" base ad:0x4C550000 group.long 0x0++0x3 line.long 0x0 "GLB_CTRL,Global Control" hexmask.long.byte 0x0 4.--7. 1. "SLOT_EN,Slot Enable" bitfld.long 0x0 3. "L_ENDIAN,Little Endian" "0,1" newline bitfld.long 0x0 2. "ENC_GO,Start Encoding" "0,1" bitfld.long 0x0 1. "SFTRST,Engine Soft Reset" "0: No effect,1: Soft reset" newline bitfld.long 0x0 0. "JPG_ENC_EN,JPEG Encoder and the wrapper enable bit" "0: Disabled,1: Enabled" rgroup.long 0x4++0x3 line.long 0x0 "COM_STATUS,Common Status" bitfld.long 0x0 31. "ENC_ONGOING,Encoding Ongoing" "0,1" bitfld.long 0x0 29.--30. "CUR_SLOT,Current Slot" "0,1,2,3" group.long 0x14++0x1B line.long 0x0 "IN_BUF_BASE0,Input Image Frame Buffer0 Base Address" hexmask.long 0x0 4.--31. 1. "IN_BUF_BASE0,Frame Buffer0 Base Address" line.long 0x4 "IN_BUF_BASE1,Input Image Frame Buffer1 Base Address" hexmask.long 0x4 4.--31. 1. "IN_BUF_BASE1,Frame Buffer1 Base Address" line.long 0x8 "IN_LINE_PITCH,Image Input Buffer Line Pitch" hexmask.long.word 0x8 0.--15. 1. "IN_LINE_PITCH,Input Image Line Pitches" line.long 0xC "STM_BUFBASE,Output JPEG Stream Buffer Base Address" hexmask.long 0xC 4.--31. 1. "STM_BUFBASE,Bit Stream Buffer Base" line.long 0x10 "STM_BUFSIZE,Output JPEG Stream Buffer Size" hexmask.long.tbyte 0x10 10.--31. 1. "STM_BUFSIZE,Bit Stream Buffer Size" line.long 0x14 "IMGSIZE,Image Resolution" hexmask.long.word 0x14 16.--29. 1. "IMG_WIDTH,Image Width" hexmask.long.word 0x14 0.--13. 1. "IMG_HEIGHT,Image Height" line.long 0x18 "STM_CTRL,Bit Stream Switch and Control" bitfld.long 0x18 9. "CONFIG_MOD,Configuration Mode" "0,1" bitfld.long 0x18 8. "AUTO_START,Auto Start" "0: Will not write any CAST JPEG Encoder Control..,1: Will write '1' to Cast JPEG Encoder [Go] Control.." newline bitfld.long 0x18 7. "BITBUF_PTR_CLR,Bit Buffer Pointer Clear" "0: After the context switching the bit stream..,1: Clear the bit stream buffer pointer after the.." hexmask.long.byte 0x18 3.--6. 1. "IMAGE_FORMAT,Image Format" newline bitfld.long 0x18 2. "PIXEL_PRECISION,Pixel Precision" "0: 8bit pixel precision,1: 12bit pixel precision" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x4C560000 ad:0x4C570000 ad:0x4C580000 ad:0x4C590000) tree "BIT_STREAM[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "SLOT_STATUS,Bit Stream SLOT Status" rbitfld.long 0x0 31. "ENC_ONGOING,Encoding Ongoing" "0,1" rbitfld.long 0x0 29.--30. "CUR_SLOT,Current Slot" "0,1,2,3" eventfld.long 0x0 11. "IMG_RD_ERR,Image Read Error" "0,1" newline eventfld.long 0x0 10. "BIT_WT_ERR,Bit Write Error" "0,1" eventfld.long 0x0 9. "DES_RD_ERR,Descriptor Read Error" "0,1" eventfld.long 0x0 8. "ENC_CONFG_ERR,Encoder Configure Error" "0: There is no configure error Any slot error need..,1: Encoder Configure error happened" newline eventfld.long 0x0 3. "FRMDONE,Frame Done" "0,1" eventfld.long 0x0 2. "SWITCHED_IN,Switched In" "0,1" eventfld.long 0x0 1. "STMBUF_RTND,Stream Buffer Returned" "0,1" newline eventfld.long 0x0 0. "STMBUF_HALF,Stream Buffer Half" "0,1" line.long 0x4 "SLOT_IRQ_EN,Bit Stream Interrupt Enable" bitfld.long 0x4 11. "IMG_RD_ERR_IRQ_EN,Image Read Error Interrupt Enable" "0,1" bitfld.long 0x4 10. "BIT_WT_ERR_IRQ_EN,Bit Write Error Interrupt Enable" "0,1" bitfld.long 0x4 9. "DES_RD_ERR_IRQ_EN,Descriptor Read Error Interrupt Enable" "0,1" newline bitfld.long 0x4 8. "ENC_CONFG_ERR_IRQ_EN,Encoder Configure Error Interrupt Enable" "0,1" bitfld.long 0x4 3. "FRMDONE_IRQ_EN,Frame Done Interrupt Enable" "0,1" bitfld.long 0x4 2. "SWITHCED_IN_IRQ_EN,Switched In Interrupt Enable" "0,1" newline bitfld.long 0x4 1. "STMBUF_RTND_IRQ_EN,Stream Buffer Returned Interrupt Enable" "0,1" bitfld.long 0x4 0. "STMBUF_HALF_IRQ_EN,Stream Buffer Half Interrupt Enable" "0,1" rgroup.long ($2+0x8)++0x7 line.long 0x0 "SLOT_BUF_PTR,Bit Stream Buffer Pointer" hexmask.long 0x0 0.--31. 1. "STMBUF_PTR,Stream0 Buffer Pointer" line.long 0x4 "SLOT_CUR_DESCPT_PTR,Current Encoding Descriptor Pointer" hexmask.long 0x4 2.--31. 1. "CUR_DESCPT_PTR,Current Descriptors Pointer" group.long ($2+0x10)++0x3 line.long 0x0 "SLOT_NXT_DESCPT_PTR,Next Encoding Descriptor Pointer" hexmask.long 0x0 2.--31. 1. "NXT_DESCPT_PTR,Slot Next Encoding Descriptors Pointer" bitfld.long 0x0 0. "NXT_DESCPT_PTR_EN,Slot Next Stream Descriptor Pointer Enable" "0,1" tree.end repeat.end tree.end tree "VPU_PRI_WR_I_QOSGENERATOR" base ad:0x4C800880 rgroup.long 0x0++0x7 line.long 0x0 "Id_CoreId,Core ID" hexmask.long.tbyte 0x0 8.--31. 1. "CORECHECKSUM,Field containing a checksum of the parameters of the IP." hexmask.long.byte 0x0 0.--7. 1. "CORETYPEID,Field identifying the type of IP." line.long 0x4 "Id_RevisionId,Revision ID" hexmask.long.tbyte 0x4 8.--31. 1. "NOCID,Field containing the build revision of the software used to generate the IP HDL code." hexmask.long.byte 0x4 0.--7. 1. "USERID,Field containing a user defined value not used anywhere inside the IP itself." group.long 0x8++0x13 line.long 0x0 "Priority,Priority" bitfld.long 0x0 8.--9. "P1,In Regulator mode defines the HIGH hurry level" "0,1,2,3" bitfld.long 0x0 0.--1. "P0,In Regulator mode defines the LOW hurry level" "0,1,2,3" line.long 0x4 "Mode,Mode" bitfld.long 0x4 0.--1. "MODE,Functional Mode: 0=Fixed 1=Limiter 2=Bypass 3=Regulator." "0: Fixed,1: Limiter,2: Bypass,3: Regulator" line.long 0x8 "Bandwidth,Bandwidth" hexmask.long.word 0x8 0.--12. 1. "BANDWIDTH,Defines the bandwidth threshold in 1/256th-byte-per-cycle units" line.long 0xC "Saturation,Saturation" hexmask.long.word 0xC 0.--9. 1. "SATURATION,Defines the size of the bandwidth counter that is the measurement window in 16-byte units" line.long 0x10 "ExtControl,External Inputs Control" bitfld.long 0x10 3. "EXTLIMITEN,When register field ExtLimitEn is set the bandwidth limiter is enabled when input signal ExtThr is asserted" "0,1" bitfld.long 0x10 2. "INTCLKEN,When set to 1 register field IntClkEn causes the QoS generator to use the NIU clock for bandwidth calculation" "0,1" bitfld.long 0x10 1. "EXTTHREN,When register field ExtThrEn is set internal signals Urgency Press and Hurry are driven when input signal ExtThr is low by the value in register Priority field P0" "0,1" bitfld.long 0x10 0. "SOCKETQOSEN,Register field SocketQosEn determines how priority levels are driven when QoS generators and socket interfaces alternatively drive the levels for Urgency Pressure and Hurry signals: When set to 0 the QoS generator drives the levels" "0,1" tree.end tree "VPU_TCU" base ad:0x4C400000 group.long 0x400++0x3 line.long 0x0 "tcu_magic_kw__magic_kw0,Magic KW0" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW0 used in conjuction with Magic KW1 to unlock the writes to test mode registers (Value is 0x12345678)" group.long 0x410++0x3 line.long 0x0 "tcu_magic_kw__magic_kw1,Magic KW1" hexmask.long 0x0 0.--31. 1. "out,32-Bit Magic KW1 used in conjuction with Magic KW0 to unlock the writes to test mode registers (Value - 0x87654321)" group.long 0xC00++0x3 line.long 0x0 "tcu_pll_counter,tcu pll counter reg" hexmask.long.word 0x0 16.--31. 1. "pll_count_cnt,pll count cnt" hexmask.long.byte 0x0 8.--15. 1. "pll_count_ref_val,pll count ref val" bitfld.long 0x0 3.--5. "pll_count_clk_sel,pll count clk sel" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "pll_count_div_en,pll count div en" "0,1" newline bitfld.long 0x0 1. "pll_count_start,pll count start" "0,1" bitfld.long 0x0 0. "pll_count_rst_n,pll count reset" "0,1" group.long 0xC40++0x3 line.long 0x0 "tcu_dft_fuse,TCU fuse observe and override" rbitfld.long 0x0 1.--3. "tcu_fuse_obs,fuse observation" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0. "tcu_dft_fuse_disable,dft fuse disable" "0,1" tree.end tree "VPU_VPU" base ad:0x4C480000 group.long 0x0++0x3 line.long 0x0 "HOST_GLOBAL_WR,HOST_GLOBAL_WR" hexmask.long 0x0 0.--31. 1. "HOST_GLOBAL_WR,host data" rgroup.long 0x4++0x1B line.long 0x0 "VCPU_CUR_PC,Current PC" hexmask.long 0x0 0.--31. 1. "CUR_PC,[DEBUG] PC value represents the address of instruction which is executed in V-CPU" line.long 0x4 "VCPU_CUR_LR,Current LR" hexmask.long 0x4 0.--31. 1. "CUR_LR,[DEBUG] Current LR (Link Register) to find out caller address" line.long 0x8 "DBG_MSG_17,Debugging message" hexmask.long 0x8 0.--31. 1. "DBG_MSG,Debugging message" line.long 0xC "DBG_MSG_18,Debugging message" hexmask.long 0xC 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x10 "DBG_MSG_19,Debugging message" hexmask.long 0x10 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x14 "DBG_MSG_20,Debugging message" hexmask.long 0x14 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x18 "DBG_MSG_21,Debugging message" hexmask.long 0x18 0.--31. 1. "DBG_MSG,Debugging message" group.long 0x20++0x7 line.long 0x0 "VPU_FIO_ADDR,FastIO Control/Address" bitfld.long 0x0 31. "READY,Ready for the transaction When writing it should be 0." "0,1" newline bitfld.long 0x0 16. "RW_FLAG,Read/Write transaction control 0: read 1: write" "0: read,1: write" newline hexmask.long.word 0x0 0.--15. 1. "FIO_ADDR,FIO Address" line.long 0x4 "VPU_FIO_DATA,FastIO Data" hexmask.long 0x4 0.--31. 1. "FIO_DATA,When writing FIO data should be written to this register firstly." rgroup.long 0x28++0xB line.long 0x0 "DBG_MSG_0,Debugging message" hexmask.long 0x0 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x4 "DBG_MSG_1,Debugging message" hexmask.long 0x4 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x8 "DBG_MSG_22,Debugging message" hexmask.long 0x8 0.--31. 1. "DBG_MSG,Debugging message" wgroup.long 0x34++0xF line.long 0x0 "VPU_VINT_REASON_CLR,Interrupt Reason Clear" bitfld.long 0x0 15. "BSEMPTY_CLR,Bitstream empty (bitstream feeding request) interrupt clear" "0,1" newline bitfld.long 0x0 14. "RSVD0,Reserved" "0,1" newline bitfld.long 0x0 13. "RSVD1,Reserved" "0,1" newline bitfld.long 0x0 12. "RSVD2,Reserved" "0,1" newline bitfld.long 0x0 11. "RSVD3,Reserved" "0,1" newline bitfld.long 0x0 10. "RSVD4,Reserved" "0,1" newline bitfld.long 0x0 9. "CMD9_CLR,ENC_SET_PARAM command done interrupt clear" "0,1" newline bitfld.long 0x0 8. "CMD8_CLR,DEC_PIC/ENC_PIC command done interrupt clear" "0,1" newline bitfld.long 0x0 7. "CMD7_CLR,SET_FRAMEBUFFER command done interrupt clear" "0,1" newline bitfld.long 0x0 6. "CMD6_CLR,INIT_SEQ command done interrupt clear" "0,1" newline bitfld.long 0x0 5. "CMD5_CLR,DESTROY_INSTANCE command done interrupt clear" "0,1" newline bitfld.long 0x0 4. "CMD4_CLR,FLSUH_INSTANCE command done interrupt clear" "0,1" newline bitfld.long 0x0 3. "CMD3_CLR,CREATE_INSTANCE command done interrupt clear" "0,1" newline bitfld.long 0x0 2. "CMD2_CLR,Reserved" "0,1" newline bitfld.long 0x0 1. "CMD1_CLR,WAKE_VPU command done interrupt clear" "0,1" newline bitfld.long 0x0 0. "CMD0_CLR,INIT_VPU command done interrupt clear" "0,1" line.long 0x4 "VPU_HOST_INT_REQ,Host Interrupt Request" bitfld.long 0x4 0. "HINTREQ,If this is set to 1 an interrupt named HOST interrupt is sent to VPU." "0,1" line.long 0x8 "VPU_VINT_CLEAR,VPU Interrupt Clear" bitfld.long 0x8 0. "VINTCLR,Clear VPU interrupt." "0,1" line.long 0xC "VPU_HINT_CLEAR_,Host Interrupt Clear" bitfld.long 0xC 0. "HINTCLR,Check Host Command Interrupt is cleared." "0,1" rgroup.long 0x44++0x3 line.long 0x0 "VPU_VPU_INT_STS_,VPU Interrupt Status" bitfld.long 0x0 0. "VPU_VPU_INT_STS_,Interrupt Status" "0,1" group.long 0x48++0x7 line.long 0x0 "VPU_VINT_ENABLE,VPU Interrupt Enable" bitfld.long 0x0 15. "BSEMPTY_EN,Bitstream empty (bitstream feeding request) interrupt clear" "0,1" newline bitfld.long 0x0 14. "RSVD0,Reserved" "0,1" newline bitfld.long 0x0 13. "RSVD1,Reserved" "0,1" newline bitfld.long 0x0 10. "CMDA_EN,Frame buffer full" "0,1" newline bitfld.long 0x0 9. "CMD9_EN,ENC_SET_PARAM command done interrupt enable" "0,1" newline bitfld.long 0x0 8. "CMD8_EN,DEC_PIC/ENC_PIC command done interrupt enable" "0,1" newline bitfld.long 0x0 7. "CMD7_EN,SET_FRAMEBUFFER command done interrupt enable" "0,1" newline bitfld.long 0x0 6. "CMD6_EN,INIT_SEQ command done interrupt enable" "0,1" newline bitfld.long 0x0 5. "CMD5_EN,DESTROY_INSTANCE command done interrupt enable" "0,1" newline bitfld.long 0x0 4. "CMD4_EN,FLSUH_INSTANCE command done interrupt enable" "0,1" newline bitfld.long 0x0 3. "CMD3_EN,CREATE_INSTANCE command done interrupt enable" "0,1" newline bitfld.long 0x0 2. "CMD2_EN,Reserved" "0,1" newline bitfld.long 0x0 1. "CMD1_EN,WAKE_VPU command done interrupt enable" "0,1" newline bitfld.long 0x0 0. "CMD0_EN,INIT_VPU command done interrupt enable" "0,1" line.long 0x4 "VPU_VINT_REASON_,VPU Interrupt Reason" bitfld.long 0x4 15. "BSEMPTY_INTR,Bitstream empty (bitstream feeding request)" "0,1" newline bitfld.long 0x4 14. "RSVD0,Reserved" "0,1" newline bitfld.long 0x4 13. "CMDD_INTR,Low latency interrupt" "0,1" newline bitfld.long 0x4 10. "CMDA_INTR,Frame buffer full" "0,1" newline bitfld.long 0x4 9. "CMD9_INTR,ENC_SET_PARAM command done interrupt" "0,1" newline bitfld.long 0x4 8. "CMD8_INTR,DEC_PIC/ENC_PIC command done interrupt" "0,1" newline bitfld.long 0x4 7. "CMD7_INTR,SET_FRAMEBUFFER command done interrupt" "0,1" newline bitfld.long 0x4 6. "CMD6_INTR,INIT_SEQ command done interrupt" "0,1" newline bitfld.long 0x4 5. "CMD5_INTR,DESTROY_INSTANCE command done interrupt" "0,1" newline bitfld.long 0x4 4. "CMD4_INTR,FLSUH_INSTANCE command done interrupt" "0,1" newline bitfld.long 0x4 3. "CMD3_INTR,CREATE_INSTANCE command done interrupt" "0,1" newline bitfld.long 0x4 2. "CMD2_INTR,Reserved" "0,1" newline bitfld.long 0x4 1. "CMD1_INTR,WAKE_VPU command done interrupt" "0,1" newline bitfld.long 0x4 0. "CMD0_INTR,INIT_VPU command done interrupt" "0,1" group.long 0x70++0x3 line.long 0x0 "VCPU_CMD_BUSY_STATUS,V-CPU Busy Status" bitfld.long 0x0 0. "VPU_BUSY_STATUS,Command Re-entrance Check [0] 0: Host processor has the ownership for access to host interface" "0: Host processor has the ownership for access to..,?" rgroup.long 0x74++0x5F line.long 0x0 "VPU_HALT_STATUS,VPU Halt Status" bitfld.long 0x0 4. "VPU_HALT_STATUS,1: V-CPU is on the HALT status" "?,1: V-CPU is on the HALT status" newline hexmask.long.byte 0x0 0.--3. 1. "VPU_HALT_STATUS_DEBUG,for debugging - Even though V-CPU is on HALT status for the clock gating or power down VPU_VCPU_STATUS should be checked to check pending bus operations" line.long 0x4 "VPU_VCPU_STATUS,VPU_VCPU_STATUS" hexmask.long.word 0x4 0.--14. 1. "VPU_VCPU_STATUS,If [31:16] is 0x0000 there is no more bus transaction on V-CPU." line.long 0x8 "VPU_BUSY_STATUS,VPU Busy Status" bitfld.long 0x8 0. "VPU_BUSY_STATUS,0 : VPU is idle." "0: VPU is idle,?" line.long 0xC "RET_FIO_STATUS,ret_fio_status" hexmask.long 0xC 0.--31. 1. "RSVD0,Reserved" line.long 0x10 "DBG_MSG_3,Debugging message" hexmask.long 0x10 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x14 "DBG_MSG_4,Debugging message" hexmask.long 0x14 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x18 "DBG_MSG_5,Debugging message" hexmask.long 0x18 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x1C "RET_PRODUCT_NAME,HW product name" hexmask.long.byte 0x1C 0.--3. 1. "HW_NAME,It always returns 'WAVE' for WAVE6 series IP product." line.long 0x20 "RET_PRODUCT_VERSION,HW product version" hexmask.long.byte 0x20 0.--3. 1. "PRODUCT_NUMBER_,It returns as follows: 0x6330 for WAVE633 (Internal use only)" line.long 0x24 "RET_VCPU_CONFIG0,Configuration Information #0" hexmask.long 0x24 0.--31. 1. "RSVD0,Configuration Information #0 (internal use only)" line.long 0x28 "RET_VCPU_CONFIG1,Configuration Information #1" hexmask.long 0x28 0.--31. 1. "RSVD0,Configuration Information #1 (internal use only)" line.long 0x2C "RET_CODEC_STD,Standard Definition" hexmask.long 0x2C 0.--31. 1. "CODEC_STD,General Configuration Information (internal use only)" line.long 0x30 "RET_CONF_DATE,Configuration Date" hexmask.long 0x30 0.--31. 1. "HW_DATE,The date that the hardware has been configured in YYYYmmdd in digit (internal use only)" line.long 0x34 "RET_CONF_REVISION,The revision of H/W configuration" hexmask.long 0x34 0.--31. 1. "HW_REVISION,The revision number when the hardware has been configured (internal use only)" line.long 0x38 "RET_CONF_TYPE,The define value of H/W configuration" hexmask.long 0x38 0.--31. 1. "HW_TYPE,The define value used in hardware configuration (internal use only)" line.long 0x3C "RET_VCORE0_CFG,Configuration Information of VCORE0" hexmask.long 0x3C 0.--31. 1. "CONFIG_VORE0,The VCORE0 Configuration Information (internal use only)" line.long 0x40 "RET_VCORE1_CFG,Configuration Information of VCORE1" hexmask.long 0x40 0.--31. 1. "CONFIG_VORE1,The VCORE1 Configuration Information (internal use only)" line.long 0x44 "RET_VCORE2_CFG,Configuration Information of VCORE2" hexmask.long 0x44 0.--31. 1. "CONFIG_VORE2,The VCORE2 Configuration Information (internal use only)" line.long 0x48 "RET_VCORE3_CFG,Configuration Information of VCORE3" hexmask.long 0x48 0.--31. 1. "CONFIG_VORE3,The VCORE3 Configuration Information (internal use only)" line.long 0x4C "VPU_RET_VCORE_PRESENT,Number of VCOREs present" hexmask.long.byte 0x4C 0.--3. 1. "VCORE_PRESENT,Each bit represents turn-on VCORE (internal use only) [0]: VCORE0 [1]: VCORE1 [2]: VCORE2 [3]: VCORE3" line.long 0x50 "DBG_MSG_6,Debugging message" hexmask.long 0x50 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x54 "DBG_MSG_7,Debugging message" hexmask.long 0x54 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x58 "DBG_MSG_8,Debugging message" hexmask.long 0x58 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x5C "DBG_MSG_9,Debugging message" hexmask.long 0x5C 0.--31. 1. "DBG_MSG,Debugging message" rgroup.long 0xD8++0x17 line.long 0x0 "DBG_MSG_10,Debugging message" hexmask.long 0x0 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x4 "DBG_MSG_11,Debugging message" hexmask.long 0x4 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x8 "DBG_MSG_12,Debugging message" hexmask.long 0x8 0.--31. 1. "DBG_MSG,Debugging message" line.long 0xC "DBG_MSG_13,Debugging message" hexmask.long 0xC 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x10 "DBG_MSG_14,Debugging message" hexmask.long 0x10 0.--31. 1. "DBG_MSG,Debugging message" line.long 0x14 "DBG_MSG_15,Debugging message" hexmask.long 0x14 0.--31. 1. "DBG_MSG,Debugging message" group.long 0xF0++0xF line.long 0x0 "VPU_DBG_SW_UART_STATUS,VPU_dbg_sw_uart_status" hexmask.long 0x0 4.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x0 0.--3. 1. "VPU_DBG_SW_UART_STATUS,the status of VPU SW_UART" line.long 0x4 "VPU_DBG_SW_UART_TX,VPU_ dbg_sw_uart_tx" hexmask.long 0x4 4.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x4 0.--3. 1. "VPU_DBG_SW_UART_TX,TX of VPU SW_UART" line.long 0x8 "VPU_DBG_REG_0,VPU_dbg_reg" hexmask.long 0x8 4.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x8 0.--3. 1. "VPU_DBG_REG_0,Debug register 0" line.long 0xC "VPU_DBG_REG_1,VPU_dbg_reg" hexmask.long 0xC 4.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0xC 0.--3. 1. "VPU_DBG_REG_1,Debug register 1" group.long 0x104++0x3 line.long 0x0 "CMD_SET_FB_UPDATE_OPTION,Run command option" hexmask.long.byte 0x0 27.--31. 1. "RSVD0,RSVD" newline bitfld.long 0x0 26. "NON_REF_FBC_WRITING,0: disable FBC writing for non-reference pictures." "0: disable FBC writing for non-reference pictures,?" newline hexmask.long.byte 0x0 20.--25. 1. "RSVD1,Reserved" newline hexmask.long.byte 0x0 16.--19. 1. "FB_ENDIAN,Frame buffer endianness." newline bitfld.long 0x0 4. "SETUP_DONE,Setup Done Please set this flag as 1 when setup for frame buffer is done" "0,1" newline bitfld.long 0x0 3. "FB_GROUP_INDICATOR,shall be 1" "0,1" newline bitfld.long 0x0 0.--2. "SET_FB_MODE,0 : Set FB *1 : Update FB*" "0: Set FB *1 : Update FB*,?,?,?,?,?,?,?" group.long 0x11C++0x3 line.long 0x0 "VPU_SUB_FRAME_SYNC_CTRL,VPU SFS Control" hexmask.long.word 0x0 16.--31. 1. "ipu_frame_row_cnt,Read valid source buffer count (for debugging)" newline rbitfld.long 0x0 15. "ipu_frame_row_valid,Read valid source buffer validation (for debugging)" "0,1" newline hexmask.long.byte 0x0 7.--14. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x0 2.--6. 1. "current_buffer,Change current source buffer Valid only if SUB_FRAME_SYNC_TYPE is 1." newline bitfld.long 0x0 1. "new_frame,Toggle when new frame start." "0,1" newline bitfld.long 0x0 0. "end_of_row,Toggle at end of line Valid only if SUB_FRAME_SYNC_TYPE is 1." "0,1" group.long 0x200++0x23 line.long 0x0 "COMMAND,Command" hexmask.long 0x0 0.--31. 1. "COMMAND,0x0001 : INIT_VPU (For product having global registers INIT_VPU is not allowed) 0x0002 : WAKE_VPU (For product having global registers INIT_VPU is not allowed) 0x0004 : RESERVED 0x0008 : CREATE_INST 0x0010 : FLUSH_INST 0x0020 : DESTROY_INST.." line.long 0x4 "CMD_DEC_PIC_OPTION,decoding picture option" hexmask.long 0x4 7.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x4 6. "FORCE_FILM_GRAIN_OFF,AV1 DEC only 0x0: film grain is not applied to BWB output regardless of syntax value named 'apply_grain' 0x1: film grain is applied or not to BWB output in accordance with syntax value named 'apply_grain'" "0: film grain is not applied to BWB output..,?" newline hexmask.long.byte 0x4 0.--5. 1. "SKIP_MODE,[HEVC DEC] 0x00: normal DEC_PIC 0x10: thumbnail mode" line.long 0x8 "RET_SUCCESS,Result of the command" bitfld.long 0x8 0.--1. "RUN_CMD_STATUS,00: FAIL 01: SUCCESS 10: SUCCESS_WITH_WARNING" "0: FAIL,1: SUCCESS,?,?" line.long 0xC "RET_FAIL_REASON,Fail reason of the run command" hexmask.long 0xC 0.--31. 1. "FAIL_REASON,Please refer to <> which provides error code description." line.long 0x10 "CMD_INSTANCE_INFO,Instance information" hexmask.long.word 0x10 16.--31. 1. "CODEC_STD,Codec standard to run STD_HEVC_DEC = 0x00 STD_HEVC_ENC = 0x01 STD_AVC_DEC = 0x02 STD_AVC_ENC = 0x03 STD_VP9_DEC = 0x16 STD_AV1_DEC = 0x1A STD_AV1_ENC = 0x1B" newline hexmask.long.word 0x10 0.--15. 1. "INST_ID,Instance ID CREATE_INSTANCE command returns instance ID through RET_CREATE_INSTANCE_ID register" line.long 0x14 "CMD_QUE_FULL_IDC,cmd queue full indicator" hexmask.long 0x14 0.--31. 1. "CMD_QUEUE_FULLNESS,For each bit position i - '1' means the command queue for instance i is full" line.long 0x18 "RET_QUE_EMPTY_IDC,cmd queue empty indicator" hexmask.long 0x18 0.--31. 1. "RET_QUEUE_EMPTY,For each bit position i - '1' means the command queue for instance i is empty" line.long 0x1C "CMD_DONE_INST_IDC,cmd done instance id" hexmask.long 0x1C 0.--31. 1. "DONE_INST_IDC,done instance idc for que command" line.long 0x20 "RET_CREATE_INSTANCE_ID,instance id" hexmask.long 0x20 0.--31. 1. "INSTANCE_ID,return allocation instance id (Valid after create_instance command)" group.long 0x23C++0x3F line.long 0x0 "RET_CMD_CQ_IN_TICK,cmd queue in tick" hexmask.long 0x0 0.--31. 1. "CMD_CQ_IN_TICK,Tick when CMD enters CQ" line.long 0x4 "RET_CMD_FW_RUN_TICK,cmd fw run tick" hexmask.long 0x4 0.--31. 1. "CMD_FW_RUN_TICK,Tick when CMD comes out of CQ (De-queue)" line.long 0x8 "RET_CMD_HW_RUN_TICK,cmd hw_core run tick" hexmask.long 0x8 0.--31. 1. "CMD_HW_RUN_TICK,Tick when giving pic_run from FW to HW" line.long 0xC "RET_CMD_HW_DONE_TICK,cmd hw_core done tick" hexmask.long 0xC 0.--31. 1. "CMD_HW_DONE_TICK,Tick when receiving pic_done from HW to FW" line.long 0x10 "RET_CMD_FW_DONE_TICK,cmd fw done tick" hexmask.long 0x10 0.--31. 1. "CMD_FW_DONE_TICK,Tick when report enters RQ" line.long 0x14 "RET_CMD_RQ_OUT_TICK,cmd return queue out tick" hexmask.long 0x14 0.--31. 1. "CMD_RQ_OUT_TICK,Tick when report comes out of RQ" line.long 0x18 "RET_CMD_FW_RRE_RUN_TICK,cmd fw pre-core run tick" hexmask.long 0x18 0.--31. 1. "CMD_FW_PRE_RUN_TICK,Tick when CMD comes out of CQ (De-queue)" line.long 0x1C "RET_CMD_HW_RRE_RUN_TICK,cmd hw pre-core run tick" hexmask.long 0x1C 0.--31. 1. "CMD_HW_PRE_RUN_TICK,Tick when giving pre_run from FW to HW" line.long 0x20 "RET_CMD_HW_RRE_DONE_TICK,cmd hw pre-core done tick" hexmask.long 0x20 0.--31. 1. "CMD_HW_RRE_DONE_TICK,Tick when receiving pre_run done from HW to FW" line.long 0x24 "RET_CMD_FW_RRE_DONE_TICK,cmd fw pre-core done tick" hexmask.long 0x24 0.--31. 1. "CMD_FW_PRE_DONE_TICK,Tick when giving pic_run from FW to Pre HW" line.long 0x28 "RET_ISR_PRE_FB_PIC_SIZE,pre_entropy_buffer_size" hexmask.long.word 0x28 16.--31. 1. "PIC_WIDTH,Picture width of DPB" newline hexmask.long.word 0x28 0.--15. 1. "PIC_HEIGHT,Picture height of DPB" line.long 0x2C "RET_ISR_PRE_FB_OPT,pre_entropy_buffer_full_option" bitfld.long 0x2C 26.--27. "BUFFER_FULL_MODE,0: FB Buffer full 1: FB update 2 3 reserved" "0: FB Buffer full,1: FB update 2,?,?" newline hexmask.long.byte 0x2C 22.--25. 1. "BIT_DEPTH_CB,Stream bit depth for chroma" newline hexmask.long.byte 0x2C 18.--21. 1. "BIT_DEPTH_Y,Stream bit depth for luma" newline hexmask.long.byte 0x2C 12.--17. 1. "COL_REPLACE_IDX,Col buffer index that chages" newline hexmask.long.byte 0x2C 6.--11. 1. "BWB_REPLACE_IDX,BWB buffer index that chages" newline hexmask.long.byte 0x2C 0.--5. 1. "FBC_REPLACE_IDX,FBC buffer index that chages" line.long 0x30 "RET_ISR_CORE0_FB_PIC_SIZE,Core0_entropy_buffer_size" hexmask.long.word 0x30 16.--31. 1. "PIC_WIDTH,Picture width of DPB" newline hexmask.long.word 0x30 0.--15. 1. "PIC_HEIGHT,Picture height of DPB" line.long 0x34 "RET_ISR_CORE0_FB_OPTION,Core0_entropy_buffer_full_option" bitfld.long 0x34 26.--27. "BUFFER_FULL_MODE,0: FB Buffer full 1: FB update 2 3 reserved" "0: FB Buffer full,1: FB update 2,?,?" newline hexmask.long.byte 0x34 22.--25. 1. "BIT_DEPTH_CB,Stream bit depth for chroma" newline hexmask.long.byte 0x34 18.--21. 1. "BIT_DEPTH_Y,Stream bit depth for luma" newline hexmask.long.byte 0x34 12.--17. 1. "COL_REPLACE_IDX,Col buffer index that chages" newline hexmask.long.byte 0x34 6.--11. 1. "BWB_REPLACE_IDX,BWB buffer index that chages" newline hexmask.long.byte 0x34 0.--5. 1. "FBC_REPLACE_IDX,FBC buffer index that chages" line.long 0x38 "RET_ISR_CORE1_FB_PIC_SIZE,Core1_entropy_buffer_size" hexmask.long.word 0x38 16.--31. 1. "PIC_WIDTH,Picture width of DPB" newline hexmask.long.word 0x38 0.--15. 1. "PIC_HEIGHT,Picture height of DPB" line.long 0x3C "RET_ISR_CORE1_FB_OPTION,Core1_entropy_buffer_full_option" bitfld.long 0x3C 26.--27. "BUFFER_FULL_MODE,0: FB Buffer full 1: FB update 2 3 reserved" "0: FB Buffer full,1: FB update 2,?,?" newline hexmask.long.byte 0x3C 22.--25. 1. "BIT_DEPTH_CB,Stream bit depth for chroma" newline hexmask.long.byte 0x3C 18.--21. 1. "BIT_DEPTH_Y,Stream bit depth for luma" newline hexmask.long.byte 0x3C 12.--17. 1. "COL_REPLACE_IDX,Col buffer index that chages" newline hexmask.long.byte 0x3C 6.--11. 1. "BWB_REPLACE_IDX,BWB buffer index that chages" newline hexmask.long.byte 0x3C 0.--5. 1. "FBC_REPLACE_IDX,FBC buffer index that chages" group.long 0x300++0x1D3 line.long 0x0 "CMD_BS_RD_PTR,Bitstream buffer read pointer" hexmask.long 0x0 0.--31. 1. "RD_PTR,Start address of bitstream for handling current command Host processor cannot update this register in the middle of decoding" line.long 0x4 "CMD_BS_SIZE,Bitstream buffer size" hexmask.long 0x4 0.--31. 1. "BS_BUF_SIZE,Size of bitstream buffer It should be aligned in bus width (128bit/16 byte) but we highly recommend to be aligned in 4KB" line.long 0x8 "CMD_BS_OPTION,Bitstream buffer option" hexmask.long.tbyte 0x8 8.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x8 6.--7. "STREAM_FORMAT,Refer." "0,1,2,3" newline bitfld.long 0x8 5. "STREAM_END,Refer." "0,1" newline bitfld.long 0x8 4. "EXPLICIT_END,Refer." "0,1" newline hexmask.long.byte 0x8 0.--3. 1. "BS_ENDIAN,Endianness of bitstream buffer" line.long 0xC "CMD_ENC_SEQ_PARAM,Encoder sequence parameters" bitfld.long 0xC 31. "USE_DEFAULT_SCALING_LIST,It enables to apply default scaling list." "0,1" newline bitfld.long 0xC 30. "STILL_PICTURE,Still_profile indicator (HEVC) 0 : disable still_profile encoding (default) 1 : enable main/main10_still_profile encoding according to bit_depth" "0: disable still_profile encoding,1: enable main/main10_still_profile encoding.." newline bitfld.long 0xC 28.--29. "RSVD0,Reserved" "0,1,2,3" newline bitfld.long 0xC 27. "USE_STRONG_INTRA,It enables strong intra smoothing." "0,1" newline bitfld.long 0xC 25.--26. "USE_INTRA_TRANS_SKIP,It enables transform skip for intra CU." "0,1,2,3" newline bitfld.long 0xC 24. "USE_SAO,It enables sample adaptive offset." "0,1" newline bitfld.long 0xC 23. "USE_TMVP,It enables temporal motion vector prediction." "0,1" newline bitfld.long 0xC 22. "RSVD1,Reserved" "0,1" newline bitfld.long 0xC 21. "USE_LONG_TERM,It enables to use long term reference frame." "0,1" newline bitfld.long 0xC 19.--20. "RSVD2,Reserved" "0,1,2,3" newline hexmask.long.byte 0xC 14.--18. 1. "BIT_DEPTH,Bit depth (8 or 10)" newline bitfld.long 0xC 12.--13. "TIER_IDC,A tier indicator (HEVC only) 0 : main 1 : high" "0: main,1: high,?,?" newline hexmask.long.word 0xC 3.--11. 1. "LEVEL_IDC,0 : VPU decides a proper level value." newline bitfld.long 0xC 0.--2. "PROFILE_IDC,Profile indicator (HEVC only) 0 : VPU decides whether the profile is main or main10 according to bit_depth" "0: VPU decides whether the profile is main or..,?,?,?,?,?,?,?" line.long 0x10 "CMD_CREATE_INST_BS_PARAM,Bitstream buffer param" hexmask.long 0x10 6.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x10 4.--5. "BS_MODE,0x0: Line buffer mode" "0: Line buffer mode,?,?,?" newline hexmask.long.byte 0x10 0.--3. 1. "BS_ENDIAN,Endianness of bitstream buffer" line.long 0x14 "CMD_DEC_SEI_MASK,User Data Mask" hexmask.long.word 0x14 17.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x14 16. "SUFFIX_SEI_COLOUR_REAMPPING_INFO,HEVC : Enable to report colour_remapping_ info( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 15. "PREFIX_SEI_CONTENT_LIGHT_LEVEL_INFO,HEVC : Enable to report content_light_level_ info( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 14. "PREFIX_SEI_FILM_GRAIN_CHARACTERISTICS_INFO,HEVC : Enable to report film_grain_ characteristics_ info() message." "0,1" newline bitfld.long 0x14 13. "PREFIX_SEI_TONE_MAPPING_INFO,HEVC : Enable to report tone_mapping_info PREFIX_SEI message." "0,1" newline bitfld.long 0x14 12. "PREFIX_SEI_KNEE_FUNCTION_INFO,HEVC : Enable to report knee_function_ info( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 11. "PREFIX_SEI_CHROMA_RESAMPLING_FILTER_HINT,HEVC : Enable to report chroma_ resampling_filter_ hint( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 10. "PREFIX_SEI_MASTERING_DISPLAY_COLOUR_VOLUME,HEVC : Enable to report mastering_display_ colour_volume( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 9. "RSVD1,Reserved" "0,1" newline bitfld.long 0x14 8. "SUFFIX_SEI_USER_DATA_UNREGISTERED,HEVC : Enable to report user_data_ unregistered( ) SUFFIX_SEI message." "0,1" newline bitfld.long 0x14 7. "SUFFIX_SEI_USER_DATA_REGISTERED_ITU_T_T35_0,HEVC : Enable to report the 1st user_data_ registered_itu_t_ t35( ) SUFFIX_SEI message." "0,1" newline bitfld.long 0x14 6. "PREFIX_SEI_USER_DATA_UNREGISTERED,HEVC : Enable to report user_data_ unregistered( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 5. "PREFIX_SEI_USER_DATA_REGISTERED_ITU_T_T35_0,HEVC : Enable to report the 1st user_data_ registered_itu_t_ t35( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 4. "PREFIX_SEI_PIC_TIMING,HEVC : Enable to report pic_timing( ) PREFIX_SEI message." "0,1" newline bitfld.long 0x14 3. "RSVD2,Reserved" "0,1" newline bitfld.long 0x14 2. "REPORT_VUI,HEVC : Enable to report VUI." "0,1" newline bitfld.long 0x14 0.--1. "RSVD3,Reserved" "0,1,2,3" line.long 0x18 "CMD_CREATE_ADDR_EXT,AXI Address Extension" hexmask.long.tbyte 0x18 8.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x18 0.--7. 1. "EXT_ADDR,Primary AXI address extension" line.long 0x1C "CMD_DEC_FORCE_FB_LATENCY_PLUS1,User define display latency" hexmask.long.byte 0x1C 0.--4. 1. "USER_DEF_DISP_LATENCY_PLUS1,Change frame buffer display latency by force." line.long 0x20 "CMD_ENC_CUSTOM_MAP_OPTION_PARAM,Custom map parameters" hexmask.long 0x20 2.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x20 1. "USE_CTU_FORCE_MODE_FLAG,It enables to force intra or force skip in block unit." "0,1" newline bitfld.long 0x20 0. "USE_QP_MAP_FLAG,It enables to use QP map." "0,1" line.long 0x24 "CMD_ENC_CUSTOM_MAP_OPTION_ADDR,Custom map address" hexmask.long 0x24 0.--31. 1. "CUSTOM_MAP_OPTION_ADDR,Address of custom map" line.long 0x28 "CMD_ENC_SEQ_SLICE_PARAM,Slice parameters" hexmask.long 0x28 3.--31. 1. "ARGUMENT,It specifies a size of slice (2^29 - 1) The number of CTU in case of SLICE_MODE = 1" newline bitfld.long 0x28 0.--2. "SLICE_MODE,A slice mode 0 - Single slice 1 - CTU based slice 2 - ROW based Slice" "0: Single slice 1,?,2: ROW based Slice,?,?,?,?,?" line.long 0x2C "CMD_ENC_SEQ_INTRA_REFRESH,Intra refresh mode" hexmask.long.word 0x2C 16.--31. 1. "INTRA_REFRESH_ARGUMENT,It specifies an intra CTU refresh interval." newline hexmask.long.word 0x2C 3.--15. 1. "RSVD0,Reserved" newline bitfld.long 0x2C 0.--2. "INTRA_REFRESH_MODE,An intra refresh mode 0 : No intra refresh 1 : Row 2 : Column 3 : A step size in CTU" "0: No intra refresh,1: Row,2: Column,3: A step size in CTU,?,?,?,?" line.long 0x30 "CMD_CREATE_INST_CORE_INFO,Dual Core information" hexmask.long.tbyte 0x30 11.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x30 8.--10. "SET_CQ_DEPTH,Set command queue depth Minimum : 1 Maximum : 6 Default : 4" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x30 4.--7. 1. "CORE_IDC,Core indicator to be used for the instance." newline hexmask.long.byte 0x30 0.--3. 1. "NUM_CORE,Number of cores to be used for the instance." line.long 0x34 "CMD_CREATE_INST_PRIORITY,Instance priority" hexmask.long.tbyte 0x34 9.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x34 8. "SECURITY_FLAG,security flag (0: non-secure instance / 1: secure instance) - AXI AxProt[1] bit is set to an inverted value." "0: non-secure instance /,1: secure instance)" newline bitfld.long 0x34 5.--7. "RSVD1,Reserved" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x34 0.--4. 1. "PRIORITY_VALUE,priority value (low priority 0~31 high priority)" line.long 0x38 "CMD_ENC_SEQ_RC_TARGET_RATE,Target bit rate" hexmask.long 0x38 0.--31. 1. "RC_TARGET_RATE,A target bit rate for rate control" line.long 0x3C "CMD_ENC_SEQ_RC_PARAM,Rate control parameters" hexmask.long.byte 0x3C 24.--31. 1. "RC_UPDATE_SPEED,rc update speed" newline hexmask.long.byte 0x3C 20.--23. 1. "RC_INITIAL_LEVEL,initial rc buffer level" newline hexmask.long.byte 0x3C 14.--19. 1. "RC_INITIAL_QP,An initial QP If this value is smaller than 0 or larger than 51 firmware decides the initial QP" newline bitfld.long 0x3C 13. "RC_MODE,Rate control mode 0 : VBR 1 : CBR" "0: VBR,1: CBR" newline hexmask.long.byte 0x3C 7.--12. 1. "PIC_RC_MAX_DELTA_QP,Max delta QP for picture level RC" newline hexmask.long.byte 0x3C 2.--6. 1. "RSVD0,Reserved" newline bitfld.long 0x3C 1. "EN_CU_LEVEL_RC,It enables CU level rate control." "0,1" newline bitfld.long 0x3C 0. "EN_RATE_CONTROL,It enables rate control." "0,1" line.long 0x40 "CMD_ENC_SEQ_HVS_PARAM,HVS parameters" hexmask.long.word 0x40 18.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x40 12.--17. 1. "HVS_MAX_DELTA_QP,Specifies maximum delta QP from CTU QP." newline hexmask.long.byte 0x40 4.--11. 1. "RSVD1,Reserved" newline hexmask.long.byte 0x40 0.--3. 1. "HVS_QP_SCALE,Specifies the scale for CU QP derivation." line.long 0x44 "CMD_ENC_SEQ_RC_MAX_BITRATE,RC_MAX_BITRATE" hexmask.long 0x44 0.--31. 1. "RC_MAX_BITRATE,A maximum bit rate for rate control" line.long 0x48 "CMD_CREATE_INST_ADDR_TEMP_BASE,Temporal buffer base address" hexmask.long 0x48 0.--31. 1. "TEMP_BUF_BASE,Base address of temporal buffer for this frame [NOTE] Each V-CORE should set this field for its own temporal buffer" line.long 0x4C "CMD_CREATE_INST_TEMP_SIZE,Temporal buffer size" hexmask.long 0x4C 0.--31. 1. "TEMP_BUF_SIZE,Temporal buffer size for a frame" line.long 0x50 "CMD_CREATE_INST_ADDR_SEC_AXI,Secondary AXI base address" hexmask.long 0x50 0.--31. 1. "SEC_AXI_BASE,The base address of secondary AXI memory" line.long 0x54 "CMD_CREATE_INST_SEC_AXI_SIZE,Secondary AXI memory size" hexmask.long 0x54 0.--31. 1. "SEC_AXI_MEM_SIZE,The size of secondary AXI temporal buffer" line.long 0x58 "CMD_CREATE_INST_ADDR_AR_TABLE,Adaptive Round Table base address" hexmask.long 0x58 0.--31. 1. "AR_TABLE_BASE,The base address of adaptive round table" line.long 0x5C "CMD_ENC_PREFIX_SEI_INFO,Information of prefix SEI nal data" hexmask.long.word 0x5C 16.--31. 1. "NAL_SIZE,The total byte size of the prefix SEI (Max." newline hexmask.long.word 0x5C 1.--15. 1. "RESERVED0,Reserved" newline bitfld.long 0x5C 0. "NAL_ENABLE,It enables to encode the prefix SEI NAL which is given by host." "0,1" line.long 0x60 "CMD_ENC_SUFFIX_SEI_NAL_ADDR,Address of suffix SEI nal data" hexmask.long 0x60 0.--31. 1. "SUFFIX_SEI_NAL_ADDR,The base address of the SUFFIX SEI NAL buffer (Big endian)" line.long 0x64 "CMD_ENC_SUFFIX_SEI_INFO,Information of suffix SEI nal data" hexmask.long.word 0x64 16.--31. 1. "NAL_SIZE,The total byte size of the suffix SEI (Max." newline hexmask.long.word 0x64 1.--15. 1. "RESERVED0,Reserved" newline bitfld.long 0x64 0. "NAL_ENABLE,It enables to encode the suffix SEI NAL which is given by host." "0,1" line.long 0x68 "CMD_SET_FB_ADDR_COL3,info base of index3" hexmask.long 0x68 0.--31. 1. "COL_BASE3,Codec dedicated information buffer for encoding/decoding HEVC/AVC: MV COL AV1 : CDF" line.long 0x6C "CMD_ENC_SEQ_BG_PARAM,Background encoding parameter" bitfld.long 0x6C 30.--31. "RSVD0,Reserved" "0,1,2,3" newline hexmask.long.byte 0x6C 24.--29. 1. "BG_DELTA_QP,It specifies the difference between the lambda QP value of background and the lambda QP value of foreground." newline hexmask.long.byte 0x6C 18.--23. 1. "RSVD1,Reserved" newline hexmask.long.byte 0x6C 10.--17. 1. "BG_TH_MEAN_DIFF,It specifies the threshold of mean difference that is used in s2me block." newline hexmask.long.word 0x6C 1.--9. 1. "BG_TH_MAX_DIFF,It specifies the threshold of max difference that is used in s2me block." newline bitfld.long 0x6C 0. "EN_BG_DETECT,It enables background detection." "0,1" line.long 0x70 "CMD_ENC_SEQ_NON_VCL_PARAM,cmd_enc_seq_non_vcl_param" hexmask.long.word 0x70 18.--31. 1. "HRD_RBSP_SIZE,The bit length of HRD RBSP data (Big endian) (HEVC) (Max size=4096)" newline hexmask.long.word 0x70 4.--17. 1. "VUI_RBSP_SIZE,The bit length of VUI RBSP data (Big endian) (HEVC AVC) (Max size=4096)" newline bitfld.long 0x70 3. "RSVD0,Reserved" "0,1" newline bitfld.long 0x70 2. "ENCODE_HRD_RBSP,A flag to encode the HRD syntax RBSP which is given by host into VPS" "0,1" newline bitfld.long 0x70 1. "ENCODE_VUI_RBSP,A flag to encode the VUI syntax RBSP which is given by host" "0,1" newline bitfld.long 0x70 0. "ENCODE_AUD,A flag to encode the AUD NAL (HEVC AVC)" "0,1" line.long 0x74 "CMD_ENC_CSC_COEFF_0,Control register of CSC" bitfld.long 0x74 30.--31. "RSVD0,Reserved" "0,1,2,3" newline hexmask.long.word 0x74 20.--29. 1. "CSC_Coeff_RY,range : -512 ~511 examples: BT" newline hexmask.long.word 0x74 10.--19. 1. "CSC_Coeff_GY,range : -512 ~511 examples: BT" newline hexmask.long.word 0x74 0.--9. 1. "CSC_Coeff_BY,range : -512 ~511 examples: BT" line.long 0x78 "CMD_ENC_CSC_COEFF_1,Control register of CSC" bitfld.long 0x78 30.--31. "RSVD0,Reserved" "0,1,2,3" newline hexmask.long.word 0x78 20.--29. 1. "CSC_Coeff_RCB,range : -512 ~511 examples: BT" newline hexmask.long.word 0x78 10.--19. 1. "CSC_Coeff_GCB,range : -512 ~511 examples: BT" newline hexmask.long.word 0x78 0.--9. 1. "CSC_Coeff_BCB,range : -512 ~511 examples: BT" line.long 0x7C "CMD_ENC_CSC_COEFF_2,Control register of CSC" bitfld.long 0x7C 30.--31. "RSVD0,Reserved" "0,1,2,3" newline hexmask.long.word 0x7C 20.--29. 1. "CSC_Coeff_RCR,range : -512 ~511 examples: BT" newline hexmask.long.word 0x7C 10.--19. 1. "CSC_Coeff_GCR,range : -512 ~511 examples: BT" newline hexmask.long.word 0x7C 0.--9. 1. "CSC_Coeff_BCR,range : -512 ~511 examples: BT" line.long 0x80 "CMD_ENC_CSC_COEFF_3,Control register of CSC" bitfld.long 0x80 30.--31. "RSVD0,Reserved" "0,1,2,3" newline hexmask.long.word 0x80 20.--29. 1. "CSC_Offset_Y,range: 0 ~ 1023 examples: BT" newline hexmask.long.word 0x80 10.--19. 1. "CSC_Offset_Cb,range: 0 ~ 1023 examples: BT" newline hexmask.long.word 0x80 0.--9. 1. "CSC_Offset_Cr,range: 0 ~ 1023 examples: BT" line.long 0x84 "CMD_ENC_SEQ_QUANT_PARAM_0,AV1 Qindex offset" hexmask.long.byte 0x84 24.--31. 1. "DELTA_QP_U_DC,It specifies the AV1 Qindex offset for DC of Cb component." newline hexmask.long.byte 0x84 16.--23. 1. "DELTA_QP_V_DC,It specifies the AV1 Qindex offset for DC of Cr component." newline hexmask.long.byte 0x84 8.--15. 1. "DELTA_QP_U_AC,It specifies the AV1 Qindex offset for AC of Cb component." newline hexmask.long.byte 0x84 0.--7. 1. "DELTA_QP_V_AC,It specifies the AV1 Qindex offset for AC of Cr component." line.long 0x88 "CMD_ENC_SEQ_QUANT_PARAM_1,Lambda delta QP for customized mode decision" hexmask.long.word 0x88 20.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x88 14.--19. 1. "LAMBDA_DELTA_QP_INTER,It specifies a lambda delta QP for inter pictures." newline hexmask.long.byte 0x88 8.--13. 1. "LAMBDA_DELTA_QP_INTRA,It specifies a lambda delta QP for intra pictures." newline hexmask.long.byte 0x88 0.--7. 1. "DELTA_QP_Y_DC,It specifies the AV1 Qindex offset for Luma DC." line.long 0x8C "CMD_ENC_SEQ_CUSTOM_GOP_PARAM,Size of source pictures of custom GOP" hexmask.long 0x8C 5.--31. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x8C 0.--4. 1. "CUSTOM_GOP_SIZE,The size of cyclic GOP (1 ~ 8) This should be the same as the number of CUSTOM_GOP_PIC_PARAM set by host" line.long 0x90 "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_0,Parameters for the 0th picture of custom GOP" bitfld.long 0x90 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0x90 26.--29. 1. "TEMPORAL_ID,A temporal ID of 0th picture in the custom GOP" newline hexmask.long.byte 0x90 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 0th picture in the custom GOP" newline hexmask.long.byte 0x90 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 0th picture in the custom GOP" newline bitfld.long 0x90 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0x90 7.--12. 1. "PIC_QP,A quantization parameter of 0th picture in the custom GOP" newline hexmask.long.byte 0x90 2.--6. 1. "POC_OFFSET,A poc offset of 0th picture in the custom GOP" newline bitfld.long 0x90 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0x94 "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_1,Parameters for the 1st picture of custom GOP" bitfld.long 0x94 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0x94 26.--29. 1. "TEMPORAL_ID,A temporal ID of 1st picture in the custom GOP" newline hexmask.long.byte 0x94 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 1st picture in the custom GOP" newline hexmask.long.byte 0x94 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 1st picture in the custom GOP" newline bitfld.long 0x94 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0x94 7.--12. 1. "PIC_QP,A quantization parameter of 1st picture in the custom GOP" newline hexmask.long.byte 0x94 2.--6. 1. "POC_OFFSET,A poc offset of 1st picture in the custom GOP" newline bitfld.long 0x94 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0x98 "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_2,Parameters for the 2nd picture of custom GOP" bitfld.long 0x98 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0x98 26.--29. 1. "TEMPORAL_ID,A temporal ID of 2nd picture in the custom GOP" newline hexmask.long.byte 0x98 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 2nd picture in the custom GOP" newline hexmask.long.byte 0x98 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 2nd picture in the custom GOP" newline bitfld.long 0x98 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0x98 7.--12. 1. "PIC_QP,A quantization parameter of 2nd picture in the custom GOP" newline hexmask.long.byte 0x98 2.--6. 1. "POC_OFFSET,A poc offset of 2nd picture in the custom GOP" newline bitfld.long 0x98 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0x9C "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_3,Parameters for the 3rd picture of custom GOP" bitfld.long 0x9C 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0x9C 26.--29. 1. "TEMPORAL_ID,A temporal ID of 3rd picture in the custom GOP" newline hexmask.long.byte 0x9C 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 3rd picture in the custom GOP" newline hexmask.long.byte 0x9C 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 3rd picture in the custom GOP" newline bitfld.long 0x9C 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0x9C 7.--12. 1. "PIC_QP,A quantization parameter of 3rd picture in the custom GOP" newline hexmask.long.byte 0x9C 2.--6. 1. "POC_OFFSET,A poc offset of 3rd picture in the custom GOP" newline bitfld.long 0x9C 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0xA0 "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_4,Parameters for the 4th picture of custom GOP" bitfld.long 0xA0 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0xA0 26.--29. 1. "TEMPORAL_ID,A temporal ID of 4th picture in the custom GOP" newline hexmask.long.byte 0xA0 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 4th picture in the custom GOP" newline hexmask.long.byte 0xA0 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 4th picture in the custom GOP" newline bitfld.long 0xA0 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0xA0 7.--12. 1. "PIC_QP,A quantization parameter of 4th picture in the custom GOP" newline hexmask.long.byte 0xA0 2.--6. 1. "POC_OFFSET,A poc offset of 4th picture in the custom GOP" newline bitfld.long 0xA0 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0xA4 "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_5,Parameters for the 5th picture of custom GOP" bitfld.long 0xA4 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0xA4 26.--29. 1. "TEMPORAL_ID,A temporal ID of 5th picture in the custom GOP" newline hexmask.long.byte 0xA4 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 5th picture in the custom GOP" newline hexmask.long.byte 0xA4 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 5th picture in the custom GOP" newline bitfld.long 0xA4 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0xA4 7.--12. 1. "PIC_QP,A quantization parameter of 5th picture in the custom GOP" newline hexmask.long.byte 0xA4 2.--6. 1. "POC_OFFSET,A poc offset of 5th picture in the custom GOP" newline bitfld.long 0xA4 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0xA8 "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_6,Parameters for the 6th picture of custom GOP" bitfld.long 0xA8 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0xA8 26.--29. 1. "TEMPORAL_ID,A temporal ID of 6th picture in the custom GOP" newline hexmask.long.byte 0xA8 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 6th picture in the custom GOP" newline hexmask.long.byte 0xA8 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 6th picture in the custom GOP" newline bitfld.long 0xA8 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0xA8 7.--12. 1. "PIC_QP,A quantization parameter of 6th picture in the custom GOP" newline hexmask.long.byte 0xA8 2.--6. 1. "POC_OFFSET,A poc offset of 6th picture in the custom GOP" newline bitfld.long 0xA8 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0xAC "CMD_ENC_SEQ_CUSTOM_GOP_PIC_PARAM_7,Parameters for the 7th picture of custom GOP" bitfld.long 0xAC 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.byte 0xAC 26.--29. 1. "TEMPORAL_ID,A temporal ID of 7th picture in the custom GOP" newline hexmask.long.byte 0xAC 20.--25. 1. "REF0_POC,A poc offset of reference L0 of 7th picture in the custom GOP" newline hexmask.long.byte 0xAC 14.--19. 1. "REF1_POC,A poc offset of reference L1 of 7th picture in the custom GOP" newline bitfld.long 0xAC 13. "USE_MULTI_REF_P,Flag to use multi reference picture for P picture It is valid only if PIC_TYPE is P" "0,1" newline hexmask.long.byte 0xAC 7.--12. 1. "PIC_QP,A quantization parameter of 7th picture in the custom GOP" newline hexmask.long.byte 0xAC 2.--6. 1. "POC_OFFSET,A poc offset of 7th picture in the custom GOP" newline bitfld.long 0xAC 0.--1. "PIC_TYPE,A picture type of 0th picture in the custom GOP 1 : P picture 2 : B picture" "?,1: P picture,2: B picture,?" line.long 0xB0 "CMD_SET_FB_ADDR_COL6,info base of index6" hexmask.long 0xB0 0.--31. 1. "COL_BASE6,Codec dedicated information buffer for encoding/decoding HEVC/AVC: MV COL AV1 : CDF" line.long 0xB4 "CMD_SET_FB_ADDR_SUB_SAMPLED_FB_BASE6,Sub sampled base of index6" hexmask.long 0xB4 0.--31. 1. "SUB_SAMPLED_FB_BASE6,A base address of frame buffer for sub sampled decoded frame 6" line.long 0xB8 "CMD_SET_FB_ADDR_LUMA_BASE7,Luma base of index7" hexmask.long 0xB8 0.--31. 1. "LUMA_BASE7,Luma base address of DPB index 7 Compressed Luma base address of DPB index 7" line.long 0xBC "CMD_SET_FB_ADDR_CB_BASE7,Cb base of index7" hexmask.long 0xBC 0.--31. 1. "CB_BASE7,Cb base address of DPB index 7 Compressed Cb and Cr base address of DPB index 7" line.long 0xC0 "CMD_SET_FB_ADDR_CR_BASE7,Cr base of index7" hexmask.long 0xC0 0.--31. 1. "CR_BASE7,Cr base address of DPB index 7" line.long 0xC4 "CMD_SET_FB_ADDR_FBC_C_OFFSET7,FBC chroma offset base of index7" hexmask.long 0xC4 0.--31. 1. "FBC_CHROMA_OFFSET_BASE7,If FBC is used this is chroma offset base address of DPB index 7." line.long 0xC8 "CMD_SET_FB_ADDR_COL7,info base of index7" hexmask.long 0xC8 0.--31. 1. "COL_BASE7,Codec dedicated information buffer for encoding/decoding HEVC/AVC: MV COL AV1 : CDF" line.long 0xCC "CMD_SET_FB_ADDR_SUB_SAMPLED_FB_BASE7,Sub sampled base of index7" hexmask.long 0xCC 0.--31. 1. "SUB_SAMPLED_FB_BASE7,A base address of frame buffer for sub sampled decoded frame 7" line.long 0xD0 "CMD_ENC_SEQ_TILE_PARAM,Tile parameters" hexmask.long.tbyte 0xD0 8.--31. 1. "RESERVED0,Reserved" newline hexmask.long.byte 0xD0 4.--7. 1. "TILE_NUM_IN_ROW_M1,It specifies the number of tile rows minus 1." newline hexmask.long.byte 0xD0 0.--3. 1. "TILE_NUM_IN_COL_M1,It specifies the number of tile columns minus 1." line.long 0xD4 "CMD_ENC_CUSTOM_LAMBDA_DATA_0,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xD4 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xD4 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xD4 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xD8 "CMD_ENC_CUSTOM_LAMBDA_DATA_1,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xD8 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xD8 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xD8 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xDC "CMD_ENC_CUSTOM_LAMBDA_DATA_2,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xDC 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xDC 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xDC 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xE0 "CMD_ENC_CUSTOM_LAMBDA_DATA_3,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xE0 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xE0 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xE0 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xE4 "CMD_ENC_CUSTOM_LAMBDA_DATA_4,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xE4 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xE4 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xE4 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xE8 "CMD_ENC_CUSTOM_LAMBDA_DATA_5,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xE8 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xE8 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xE8 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xEC "CMD_ENC_CUSTOM_LAMBDA_DATA_6,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xEC 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xEC 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xEC 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xF0 "CMD_ENC_CUSTOM_LAMBDA_DATA_7,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xF0 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xF0 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xF0 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xF4 "CMD_ENC_CUSTOM_LAMBDA_DATA_8,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xF4 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xF4 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xF4 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xF8 "CMD_ENC_CUSTOM_LAMBDA_DATA_9,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xF8 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xF8 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xF8 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0xFC "CMD_ENC_CUSTOM_LAMBDA_DATA_10,CUSTOM_LAMBDA_DATA" hexmask.long.word 0xFC 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0xFC 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0xFC 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x100 "CMD_ENC_CUSTOM_LAMBDA_DATA_11,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x100 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x100 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x100 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x104 "CMD_ENC_CUSTOM_LAMBDA_DATA_12,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x104 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x104 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x104 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x108 "CMD_ENC_CUSTOM_LAMBDA_DATA_13,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x108 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x108 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x108 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x10C "CMD_ENC_CUSTOM_LAMBDA_DATA_14,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x10C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x10C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x10C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x110 "CMD_ENC_CUSTOM_LAMBDA_DATA_15,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x110 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x110 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x110 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x114 "CMD_ENC_CUSTOM_LAMBDA_DATA_16,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x114 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x114 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x114 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x118 "CMD_ENC_CUSTOM_LAMBDA_DATA_17,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x118 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x118 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x118 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x11C "CMD_ENC_CUSTOM_LAMBDA_DATA_18,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x11C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x11C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x11C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x120 "CMD_ENC_CUSTOM_LAMBDA_DATA_19,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x120 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x120 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x120 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x124 "CMD_ENC_CUSTOM_LAMBDA_DATA_20,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x124 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x124 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x124 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x128 "CMD_ENC_CUSTOM_LAMBDA_DATA_21,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x128 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x128 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x128 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x12C "CMD_ENC_CUSTOM_LAMBDA_DATA_22,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x12C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x12C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x12C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x130 "CMD_ENC_CUSTOM_LAMBDA_DATA_23,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x130 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x130 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x130 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x134 "CMD_ENC_CUSTOM_LAMBDA_DATA_24,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x134 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x134 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x134 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x138 "CMD_ENC_CUSTOM_LAMBDA_DATA_25,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x138 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x138 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x138 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x13C "CMD_ENC_CUSTOM_LAMBDA_DATA_26,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x13C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x13C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x13C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x140 "CMD_ENC_CUSTOM_LAMBDA_DATA_27,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x140 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x140 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x140 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x144 "CMD_ENC_CUSTOM_LAMBDA_DATA_28,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x144 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x144 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x144 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x148 "CMD_ENC_CUSTOM_LAMBDA_DATA_29,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x148 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x148 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x148 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x14C "CMD_ENC_CUSTOM_LAMBDA_DATA_30,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x14C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x14C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x14C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x150 "CMD_ENC_CUSTOM_LAMBDA_DATA_31,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x150 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x150 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x150 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x154 "CMD_ENC_CUSTOM_LAMBDA_DATA_32,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x154 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x154 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x154 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x158 "CMD_ENC_CUSTOM_LAMBDA_DATA_33,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x158 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x158 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x158 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x15C "CMD_ENC_CUSTOM_LAMBDA_DATA_34,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x15C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x15C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x15C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x160 "CMD_ENC_CUSTOM_LAMBDA_DATA_35,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x160 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x160 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x160 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x164 "CMD_ENC_CUSTOM_LAMBDA_DATA_36,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x164 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x164 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x164 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x168 "CMD_ENC_CUSTOM_LAMBDA_DATA_37,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x168 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x168 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x168 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x16C "CMD_ENC_CUSTOM_LAMBDA_DATA_38,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x16C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x16C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x16C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x170 "CMD_ENC_CUSTOM_LAMBDA_DATA_39,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x170 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x170 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x170 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x174 "CMD_ENC_CUSTOM_LAMBDA_DATA_40,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x174 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x174 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x174 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x178 "CMD_ENC_CUSTOM_LAMBDA_DATA_41,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x178 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x178 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x178 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x17C "CMD_ENC_CUSTOM_LAMBDA_DATA_42,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x17C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x17C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x17C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x180 "CMD_ENC_CUSTOM_LAMBDA_DATA_43,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x180 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x180 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x180 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x184 "CMD_ENC_CUSTOM_LAMBDA_DATA_44,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x184 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x184 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x184 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x188 "CMD_ENC_CUSTOM_LAMBDA_DATA_45,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x188 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x188 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x188 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x18C "CMD_ENC_CUSTOM_LAMBDA_DATA_46,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x18C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x18C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x18C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x190 "CMD_ENC_CUSTOM_LAMBDA_DATA_47,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x190 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x190 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x190 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x194 "CMD_ENC_CUSTOM_LAMBDA_DATA_48,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x194 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x194 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x194 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x198 "CMD_ENC_CUSTOM_LAMBDA_DATA_49,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x198 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x198 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x198 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x19C "CMD_ENC_CUSTOM_LAMBDA_DATA_50,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x19C 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x19C 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x19C 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x1A0 "CMD_ENC_CUSTOM_LAMBDA_DATA_51,CUSTOM_LAMBDA_DATA" hexmask.long.word 0x1A0 21.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x1A0 7.--20. 1. "LAMBDA_SSD,lambda_ssd data" newline hexmask.long.byte 0x1A0 0.--6. 1. "LAMBDA_SAD,lambda_sad data" line.long 0x1A4 "CMD_ENC_SEQ_TEMPORAL_LAYER_0_QP,TEMPORAL_LAYER_0_QP" hexmask.long.word 0x1A4 18.--31. 1. "RESERVED0,Reserved" newline hexmask.long.byte 0x1A4 12.--17. 1. "B_QP,A QP value of B Pictures" newline hexmask.long.byte 0x1A4 6.--11. 1. "P_QP,A QP value of P Pictures" newline hexmask.long.byte 0x1A4 0.--5. 1. "I_QP,A QP value of I Pictures" line.long 0x1A8 "CMD_ENC_SEQ_TEMPORAL_LAYER_1_QP,TEMPORAL_LAYER_1_QP" hexmask.long.word 0x1A8 18.--31. 1. "RESERVED0,Reserved" newline hexmask.long.byte 0x1A8 12.--17. 1. "B_QP,A QP value of B Pictures" newline hexmask.long.byte 0x1A8 6.--11. 1. "P_QP,A QP value of P Pictures" newline hexmask.long.byte 0x1A8 0.--5. 1. "I_QP,A QP value of I Pictures" line.long 0x1AC "CMD_ENC_SEQ_TEMPORAL_LAYER_2_QP,TEMPORAL_LAYER_2_QP" hexmask.long.word 0x1AC 18.--31. 1. "RESERVED0,Reserved" newline hexmask.long.byte 0x1AC 12.--17. 1. "B_QP,A QP value of B Pictures" newline hexmask.long.byte 0x1AC 6.--11. 1. "P_QP,A QP value of P Pictures" newline hexmask.long.byte 0x1AC 0.--5. 1. "I_QP,A QP value of I Pictures" line.long 0x1B0 "CMD_ENC_SEQ_TEMPORAL_LAYER_3_QP,TEMPORAL_LAYER_3_QP" hexmask.long.word 0x1B0 18.--31. 1. "RESERVED0,Reserved" newline hexmask.long.byte 0x1B0 12.--17. 1. "B_QP,A QP value of B Pictures" newline hexmask.long.byte 0x1B0 6.--11. 1. "P_QP,A QP value of P Pictures" newline hexmask.long.byte 0x1B0 0.--5. 1. "I_QP,A QP value of I Pictures" line.long 0x1B4 "CMD_ENC_SEQ_SCL_SRC_SIZE,SCALER SRC SIZE" hexmask.long.word 0x1B4 16.--31. 1. "PIC_HEIGHT,A height of picture in pixel (128 ~ 8192) (before scaler)" newline hexmask.long.word 0x1B4 0.--15. 1. "PIC_WIDTH,A width of picture in pixel (256 ~ 8192) (before scaler)" line.long 0x1B8 "CMD_ENC_SEQ_SCL_PARAM,SCALER PARAMETER" hexmask.long 0x1B8 3.--31. 1. "RSVD0,RSVD" newline bitfld.long 0x1B8 1.--2. "SCL_COEF_MODE,Scaler coeff mode 0:bicubic 0" "0: bicubic 0,?,?,?" newline bitfld.long 0x1B8 0. "SCL_EN,Scaler enable flag (0 : off 1: on)" "0: off,1: on)" line.long 0x1BC "CMD_ENC_SEQ_Y2Y_PARAM,Y2Y PARAMETER" hexmask.long 0x1BC 2.--31. 1. "RSVD0,RSVD" newline bitfld.long 0x1BC 0.--1. "Y2Y_MODE,Y2Y mode 0: off 1: Y only 2: Chroma only 3: Y/Chroma" "0: off,1: Y only,2: Chroma only,3: Y/Chroma" line.long 0x1C0 "CMD_SET_FB_DEC_PP_CROP_PARAM,Crop ctrl parameter" hexmask.long 0x1C0 1.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x1C0 0. "CROP_EN,Crop enable flag 0 : disable 1 : enable" "0: disable,1: enable" line.long 0x1C4 "CMD_ENC_SEQ_SFS_PARAM,CONTROL REGISTER OF SUB FRAME SYNC" hexmask.long 0x1C4 2.--31. 1. "RESERVED0,Reserved" newline bitfld.long 0x1C4 1. "SUB_FRAME_SYNC_TYPE,0 : signal(wired) based 1: register based" "0: signal,1: register based" newline bitfld.long 0x1C4 0. "SUB_FRAME_SYNC_ON,0 : off 1: on" "0: off,1: on" line.long 0x1C8 "CMD_ENC_SEQ_CROP_ENABLE,PRE PROCESSING CROP DATA" hexmask.long 0x1C8 1.--31. 1. "RSVD0,reserved" newline bitfld.long 0x1C8 0. "CROP_EN,Crop enable flag (0 : off 1: on)" "0: off,1: on)" line.long 0x1CC "CMD_ENC_SEQ_CROP_START_POS,CONTROL REGISTER OF CROP START" hexmask.long.word 0x1CC 16.--31. 1. "CROP_START_X,start X position for crop (AFBCD or Crop )" newline hexmask.long.word 0x1CC 0.--15. 1. "CROP_START_Y,start Y position for crop (AFBCD or Crop )" line.long 0x1D0 "CMD_ENC_SEQ_CROP_SRC_SIZE,CROP_SRC SIZE" hexmask.long.word 0x1D0 16.--31. 1. "PIC_HEIGHT,A height of picture in pixel (128 ~ 8192) (before crop)" newline hexmask.long.word 0x1D0 0.--15. 1. "PIC_WIDTH,A width of picture in pixel (256 ~ 8192) (before crop)" group.long 0x4D8++0xF line.long 0x0 "CMD_ENC_SEQ_Y2Y_DATA_0,Y2Y DATA" bitfld.long 0x0 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.word 0x0 20.--29. 1. "LUMA_OUT_MIN,Y2Y luma output min value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" newline hexmask.long.word 0x0 10.--19. 1. "LUMA_IN_MAX,Y2Y luma input max value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" newline hexmask.long.word 0x0 0.--9. 1. "LUMA_IN_MIN,Y2Y luma input min value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" line.long 0x4 "CMD_ENC_SEQ_Y2Y_DATA_1,Y2Y DATA" bitfld.long 0x4 30.--31. "RESERVED0,Reserved" "0,1,2,3" newline hexmask.long.word 0x4 20.--29. 1. "CHR_IN_MAX,Y2Y Chroma input max value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" newline hexmask.long.word 0x4 10.--19. 1. "CHR_IN_MIN,Y2Y Chroma input min value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" newline hexmask.long.word 0x4 0.--9. 1. "LUMA_OUT_MAX,Y2Y luma output max value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" line.long 0x8 "CMD_ENC_SEQ_Y2Y_DATA_2,Y2Y DATA" hexmask.long.word 0x8 20.--31. 1. "RESERVED0,Reserved" newline hexmask.long.word 0x8 10.--19. 1. "CHR_OUT_MAX,Y2Y Chroma output max value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" newline hexmask.long.word 0x8 0.--9. 1. "CHR_OUT_MIN,Y2Y Chroma output min value 8bit: 0 ~ 255 10 bit : 0 ~ 1023" line.long 0xC "CMD_ENC_SEQ_INPUT_RINGBUF,INPUT RING BUF CTRL" hexmask.long 0xC 1.--31. 1. "RESERVED0,Reserved" newline bitfld.long 0xC 0. "INPUT_RINGBUF_EN,0 : off 1 : on" "0: off,1: on" wgroup.long 0x600++0xB line.long 0x0 "VPU_PDBG_CTRL,V-CPU Debugger Control" hexmask.long 0x0 4.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x0 3. "IMMBRK,Immediate break It forces to stop V-CPU and enter in a debug mode to analyze hang-up situation" "0,1" newline bitfld.long 0x0 2. "STABLEBRK,Stable break It is an external break request when V-CPU is in stable (breakable) status." "0,1" newline bitfld.long 0x0 1. "RESUME,Resume It resumes from the breakpoint." "0,1" newline bitfld.long 0x0 0. "STEP,Step It runs V-CPU in step instruction mode." "0,1" line.long 0x4 "VPU_PDBG_IDX_REG,V-CPU Debugger Index" hexmask.long.tbyte 0x4 10.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x4 9. "RDDBG,Read Operation Request RDDBG and WRDBG cannot be 1 at the same time" "0,1" newline bitfld.long 0x4 8. "WRDBG,Write Operation Request RDDBG and WRDBG cannot be 1 at the same time" "0,1" newline hexmask.long.byte 0x4 0.--7. 1. "DBGIDX,Debug Index Debugger Register Index" line.long 0x8 "VPU_PDBG_WDATA_REG,V-CPU Debugger Write Data" hexmask.long 0x8 0.--31. 1. "VPU_PDBG_WDATA_REG,To write data to the debugger # Write some data to this register" rgroup.long 0x60C++0x3 line.long 0x0 "VPU_PDBG_RDATA_REG,V-CPU Debugger Read Data" hexmask.long 0x0 0.--31. 1. "VPU_PDBG_RDATA_REG,To read data to the debugger # Write VCPU_PDBG_IDX_REG with RDDBG as 1 and DBGIDX as the register address to be read" group.long 0x610++0x3 line.long 0x0 "VPU_PDBG_STEP_MASK,V-CPU Debugger Step Mask" hexmask.long 0x0 1.--31. 1. "RSVD0,Reserved" newline bitfld.long 0x0 0. "STEP_MASK_ENABLE,Interrupt Disable at step for debugger" "0,1" wgroup.long 0x4058++0x3 line.long 0x0 "VCPU_RESTART,V-CPU Restart Request" bitfld.long 0x0 0. "VCPU_RESTART,This register restarts V-CPU from the reset vector without clearing H/W logic." "0,1" group.long 0x4060++0xF line.long 0x0 "VPU_REMAP_CTRL,Remap Control" bitfld.long 0x0 31. "REMAP_GLOBEN,Set 1 if you want to change the [30:12] part of this register Default to be 0" "0,1" newline hexmask.long.word 0x0 20.--30. 1. "RSVD0,Reserved" newline hexmask.long.byte 0x0 16.--19. 1. "ENDIAN,Endianness for memory access Endian control of memory transactions from processor core" newline hexmask.long.byte 0x0 12.--15. 1. "REMAP_IDX,Remap index Only 0 to 3 are valid." newline bitfld.long 0x0 11. "REMAP_PAGE_SIZE_EN,Set 1 if you want to change the REMAP_PSIZE field Default to be 0" "0,1" newline bitfld.long 0x0 9.--10. "RSVD1,Reserved" "0,1,2,3" newline hexmask.long.word 0x0 0.--8. 1. "REMAP_PSIZE,Remap Page Size (page base should be aligned in 4KB boundary) 0x001: 4K 0x002: 8K 0x004: 16K 0x008: 32K 0x010 : 64K 0x020 : 128K 0x040 : 256K 0x080: 512K 0x100: 1M" line.long 0x4 "VPU_REMAP_VADDR,Remap Virtual Address" hexmask.long.tbyte 0x4 12.--31. 1. "VPU_REMAP_VADDR,Remap region base address in virtual address space." line.long 0x8 "VPU_REMAP_PADDR,Remap Physical Address" hexmask.long.tbyte 0x8 12.--31. 1. "VPU_REMAP_PADDR,Real address(physical address) as a pair of virtual address." line.long 0xC "VPU_REMAP_CORE_START,VPU Start Request" bitfld.long 0xC 0. "VPU_REMAP_CORE_START,It starts VPU after initial setting has been done." "0,1" group.long 0x4104++0x3 line.long 0x0 "COMMAND_GLOBAL,Command" hexmask.long 0x0 0.--31. 1. "COMMAND,0x0001 : INIT_VPU 0x0002 : WAKE_VPU" tree.end tree.end tree "VS_MII_MMD" base ad:0x4C800000 group.word 0x0++0x1 line.word 0x0 "SR_MII_CTRL,." bitfld.word 0x0 15. "RST,RST" "0,1" newline bitfld.word 0x0 14. "LBE,Loopback Enable When set this bit loops the PHY Tx lanes back to the PHY Rx lanes." "0,1" newline bitfld.word 0x0 13. "SS13,Speed Selection (LSB) This bit along with the SS6 bit and SS5 bit of this register indicates the speed." "0,1" newline bitfld.word 0x0 12. "AN_ENABLE,Enable Auto-Negotiation When set to 1 this bit enables the Clause 37 auto-negotiation process." "0,1" newline bitfld.word 0x0 11. "LPM,Power-Down Mode This bit controls the power-down mode of the DWC_xpcs." "0,1" newline bitfld.word 0x0 9. "RESTART_AN,Restart Auto-Negotiation (RW SC Type) When the host writes this bit the DWC_xpcs initiates the auto-negotiation process." "0,1" newline bitfld.word 0x0 8. "DUPLEX_MODE,Duplex Mode This bit specifies the duplex mode of the DWC_xpcs." "0,1" newline bitfld.word 0x0 6. "SS6,Speed Selection This bit along with the SS13 bit (and SS5 bit in case of USXGMII configuration) of this register indicates the speed." "0,1" newline bitfld.word 0x0 5. "SS5,Speed Selection bit This bit along with SS13 and SS6 bit of this register indicates the speed For more information see description of the SS13 bit." "0,1" rgroup.word 0x2++0x5 line.word 0x0 "SR_MII_STS,SR MII MMD Status Register The host uses this register to know the features supported by the DWC_xpcs in the 1000BASE-X mode." bitfld.word 0x0 15. "ABL100T4,100BASE-T4 Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 14. "FD100ABL,100BASE-X Full-Duplex Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 13. "HD100ABL,100BASE-X Half-Duplex Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 12. "FD10ABL,10 Mbps Full-Duplex Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 11. "HD10ABL,10 Mbps Half-Duplex Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 10. "FD100T,100BASE-T2 Full-Duplex Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 9. "HD100T,100BASE-T2 Half-Duplex Ability The DWC_xpcs always returns 0 because it does not support this functionality." "0,1" newline bitfld.word 0x0 8. "EXT_STS_ABL,Extended Status Information - 0: No Extended Status information is present at register address 16'h000F of this MMD device." "0: No Extended Status information is present at..,?" newline bitfld.word 0x0 7. "UN_DIR_ABL,Unidirectional Ability - 1: The DWC_xpcs is able to transmit GMII irrespective of whether device has determined the valid link or not." "?,1: The DWC_xpcs is able to transmit GMII.." newline bitfld.word 0x0 6. "MF_PRE_SUP,MF Preamble Suppression - 1: The DWC_xpcs accepts the MDIO frames with preamble suppressed." "?,1: The DWC_xpcs accepts the MDIO frames with.." newline bitfld.word 0x0 5. "AN_CMPL,AN_CMPL" "0,1" newline bitfld.word 0x0 4. "RF,Remote Fault (RO LH Type) When set to 1 this bit indicates that the receive link of the link partner is down." "0,1" newline bitfld.word 0x0 3. "AN_ABL,Auto-negotiation Ability The DWC_xpcs always returns this bit as 1." "0,1" newline bitfld.word 0x0 2. "LINK_STS,Link Status (RO LL Type) When the DWC_xpcs sets this bit to 1 it indicates that the Rx link is up." "0,1" newline bitfld.word 0x0 0. "EXT_REG_CAP,Extended Register Capability - 1: Extended Register capability exists." "?,1: Extended Register capability exists" line.word 0x2 "SR_MII_DEV_ID1,SR MII MMD Device Identifier Register 1 This register returns the configurable Organizationally Unique Identifier (OUI) to the host." hexmask.word 0x2 0.--15. 1. "VS_MII_DEV_OUI_3_18,Organizationally Unique Identifier[3:18] This field contains Bits [18:3] of 24-bit OUI of device manufacturer." line.word 0x4 "SR_MII_DEV_ID2,." hexmask.word.byte 0x4 10.--15. 1. "VS_MMD_DEV_OUI_19_24,Organizationally Unique Identifier [19:24] This field contains Bits[24:19] of 24-bit OUI of device manufacturer." newline hexmask.word.byte 0x4 4.--9. 1. "VS_MMD_DEV_MMN_5_0,Model Number This field contains the 5-bit Model Number of the device." newline hexmask.word.byte 0x4 0.--3. 1. "VS_MMD_DEV_RN_3_0,Revision Number This field contains the 4-bit Revision Number of the device." group.word 0x8++0x1 line.word 0x0 "SR_MII_AN_ADV,SR_MII_AN_ADV" rbitfld.word 0x0 15. "NP,Next Page The DWC_xpcs always returns this bit as 0 because it does not support the Next Page feature." "0,1" newline bitfld.word 0x0 12.--13. "RF,Remote Fault This field indicates the fault signaling of the local device to be communicated to the link partner." "0,1,2,3" newline bitfld.word 0x0 7.--8. "PAUSE,Pause Ability This field indicates the Pause ability of the device." "0,1,2,3" newline bitfld.word 0x0 6. "HD,Half Duplex When this bit is set it indicates that the device can operate in the half-duplex mode." "0,1" newline bitfld.word 0x0 5. "FD,Full Duplex When this bit is set it indicates that the device can operate in the full-duplex mode." "0,1" rgroup.word 0xA++0x3 line.word 0x0 "SR_MII_LP_BABL,SR_MII_LP_BABL" bitfld.word 0x0 15. "LP_NP,Next Page This bit indicates that the link partner can handle Next Page." "0,1" newline bitfld.word 0x0 14. "LP_ACK,ACK bit from the Link Partner This bit indicates that the link partner has successfully received the page sent by the local device." "0,1" newline bitfld.word 0x0 12.--13. "LP_RF,Remote Fault This field indicates the fault signaling of the link partner." "0,1,2,3" newline bitfld.word 0x0 7.--8. "LP_PAUSE,Pause Ability This field indicates the Pause ability of the link partner." "0,1,2,3" newline bitfld.word 0x0 6. "LP_HD,Half Duplex When this bit is set it indicates that the link partner is capable of operating in the half-duplex mode." "0,1" newline bitfld.word 0x0 5. "LP_FD,Full Duplex When this bit is set it indicates that the link partner is capable of operating in the full-duplex mode." "0,1" line.word 0x2 "SR_MII_AN_EXPN,SR MII MMD AN Expansion Register" bitfld.word 0x2 2. "LD_NP_ABL,." "0,1" newline bitfld.word 0x2 1. "PG_RCVD,Page Received (RO LH Type) This bit indicates that the local device received a page from the link partner." "0,1" rgroup.word 0x1E++0x1 line.word 0x0 "SR_MII_EXT_STS,SR MII MMD Extended Status Register This register is present only for configurations with 1G/KX support." bitfld.word 0x0 15. "CAP_1G_X_FD,." "0,1" newline bitfld.word 0x0 14. "CAP_1G_X_HD,." "0,1" newline bitfld.word 0x0 13. "CAP_1G_T_FD,." "0,1" newline bitfld.word 0x0 12. "CAP_1G_T_HD,." "0,1" group.word 0x10000++0x5 line.word 0x0 "VR_MII_DIG_CTRL1,VR MII MMD Digital Control1 Register" bitfld.word 0x0 15. "VR_RST,VR_RST" "0,1" newline rbitfld.word 0x0 14. "R2TLBE,Rx to Tx Loopback Enable This bit controls the loopback path from the GMII Rx to the GMII Tx at the GMII interface." "0,1" newline rbitfld.word 0x0 13. "EN_VSMMD1,Enable Vendor-Specific MMD1 When this bit is set to 1 the vendor-specific MMD1 (VSMMD1) is enabled." "0,1" newline rbitfld.word 0x0 12. "CL37_BP,Enable Clause 37 AN in Backplane Configuration This bit is present when MAIN_MODE = Backplane Ethernet PCS and CL37_AN = Enabled." "0,1" newline bitfld.word 0x0 11. "PWRSV,Power Save This bit is present only when the DWC_xpcs is configured for Synopsys PHY." "0,1" newline rbitfld.word 0x0 10. "CS_EN,Reserved" "0,1" newline bitfld.word 0x0 9. "MAC_AUTO_SW,MAC_AUTO_SW" "0,1" newline rbitfld.word 0x0 8. "INIT,Reserved" "0,1" newline rbitfld.word 0x0 7. "MSK_RD_ERR,Mask Running Disparity Error." "0,1" newline bitfld.word 0x0 6. "PRE_EMP,Pre-emption Packet Enable." "0,1" newline rbitfld.word 0x0 5. "EN_100M,Enable 100Mbps PCS Mode." "0,1" newline rbitfld.word 0x0 4. "DTXLANED_0,Tx Lane 0 Disable When this bit is set the DWC_xpcs disables the Tx Lane 0 of the PHY." "0,1" newline bitfld.word 0x0 3. "CL37_TMR_OVR_RIDE,Over-Ride Control for CL37 Link Timer." "0,1" newline bitfld.word 0x0 2. "EN_2_5G_MODE,Enable 2." "0,1" newline bitfld.word 0x0 1. "BYP_PWRUP,BYP_PWRUP" "0,1" newline rbitfld.word 0x0 0. "PHY_MODE_CTRL,PHY_MODE_CTRL" "0,1" line.word 0x2 "VR_MII_AN_CTRL,VR MII MMD AN Control Register" bitfld.word 0x2 9. "IND_TX_EN,Independent Transmit Enable in 1000BASE-X/KX mode." "0,1" newline bitfld.word 0x2 8. "MII_CTRL,MII_CTRL" "0,1" newline bitfld.word 0x2 4. "SGMII_LINK_STS,SGMII_LINK_STS" "0,1" newline bitfld.word 0x2 3. "TX_CONFIG,TX_CONFIG" "0,1" newline bitfld.word 0x2 1.--2. "PCS_MODE,When SGMII_EN = Enabled or QSGMII_EN = Enabled: PCS Mode This field controls the auto-negotiation (and operating) mode." "0,1,2,3" newline bitfld.word 0x2 0. "MII_AN_INTR_EN,Clause 37 AN Complete Interrupt Enable When set to 1 this bit enables the generation of Clause 37 auto-negotiation complete interrupt output." "0,1" line.word 0x4 "VR_MII_AN_INTR_STS,VR MII MMD AN Interrupt and Status Register" hexmask.word.byte 0x4 8.--14. 1. "USXG_AN_STS,USXGMII Clause 37 AN Status This field is valid only when clause 37 auto-negotiation is complete in USXGMII Mode." newline rbitfld.word 0x4 6. "LP_CK_STP,LP_CK_STP" "0,1" newline rbitfld.word 0x4 5. "LP_EEE_CAP,Link Partner EEE Capability This field indicates the EEE capability advertised by the far-end device (Port 0 QSGMII PHY)." "0,1" newline hexmask.word.byte 0x4 1.--4. 1. "CL37_ANSGM_STS,CL37_ANSGM_STS" newline bitfld.word 0x4 0. "CL37_ANCMPLT_INTR,Clause 37 AN Complete Interrupt (SS WC Type) The DWC_xpcs sets this bit when Clause 37 auto-negotiation is complete." "0,1" group.word 0x10008++0x1 line.word 0x0 "VR_MII_DIG_CTRL3,VR MII MMD Digital Control 3 Register" bitfld.word 0x0 2. "CICD,CICD" "0,1" newline rbitfld.word 0x0 1. "RICE,Receive IPG Check Enable during XGMII-to-GMII conversion on Port 0." "0,1" newline rbitfld.word 0x0 0. "TICD,Transmit IPG Check Deviation on Port 0." "0,1" group.word 0x10014++0x1 line.word 0x0 "VR_MII_LINK_TIMER_CTRL,VR MII MMD Link Timer Control Register" hexmask.word 0x0 0.--15. 1. "CL37_LINK_TIME,Programmable Link Timer Value for Clause 37 auto-negotiation." tree.end tree "VS_MMD" base ad:0x4C800000 rgroup.word 0x0++0x11 line.word 0x0 "SR_VSMMD_PMA_ID1,SR Control MMD PMA Device Identifier Register 1" hexmask.word 0x0 0.--15. 1. "PMADOUI_3_18,Organizationally Unique Identifier[3:18] for PMA MMD This field contains Bits[18:3] of 24-bit OUI of device manufacturer." line.word 0x2 "SR_VSMMD_PMA_ID2,SR Control MMD PMA Device Identifier Register 2" hexmask.word.byte 0x2 10.--15. 1. "PMADOUI_19_24,PMADOUI_19_24" hexmask.word.byte 0x2 4.--9. 1. "PMADMMN_5_0,Model Number for PMA MMD This field contains the 6-bit Model number of the PMA MMD." hexmask.word.byte 0x2 0.--3. 1. "PMADRN_3_0,Revision Number for PMA MMD This field contains the 4-bit Revision number of the PMA MMD." line.word 0x4 "SR_VSMMD_DEV_ID1,SR Control MMD Device Identifier Register 1" hexmask.word 0x4 0.--15. 1. "VSDOUI_3_18,Organizationally Unique Identifier[3:18] for Vendor-Specific MMD1 This field contains Bits[18:3] of 24-bit OUI of device manufacturer." line.word 0x6 "SR_VSMMD_DEV_ID2,SR Control MMD Device Identifier Register 2" hexmask.word.byte 0x6 10.--15. 1. "VSDOUI_19_24,Organizationally Unique Identifier[19:24] for Vendor-Specific MMD1 This field contains Bits[24:19] of the device manufacturer's 24- bit OUI." hexmask.word.byte 0x6 4.--9. 1. "VSDMMN_5_0,Model Number for Vendor-Specific MMD1 This field contains the 6-bit Model number of the vendor-specific MMD1." hexmask.word.byte 0x6 0.--3. 1. "VSDRN_3_0,Revision Number for Vendor-Specific MMD1 This field contains the 4-bit Revision number of the vendor-specific MMD1." line.word 0x8 "SR_VSMMD_PCS_ID1,SR Control MMD PCS Device Identifier Register 1" hexmask.word 0x8 0.--15. 1. "PCSDOUI_3_18,Organizationally Unique Identifier[3:18] for PCS MMD This field contains Bits[18:3] of 24-bit OUI of device manufacturer." line.word 0xA "SR_VSMMD_PCS_ID2,SR Control MMD PCS Device Identifier Register 2" hexmask.word.byte 0xA 10.--15. 1. "PCSDOUI_19_24,Organizationally Unique Identifier[19:24] for PCS MMD This field contains Bits[24:19] of 24-bit OUI of device manufacturer." hexmask.word.byte 0xA 4.--9. 1. "PCSDMMN_5_0,Model Number for XS or PCS MMD This field contains the 6-bit Model number of vendor-specific XS or PCS MMD." hexmask.word.byte 0xA 0.--3. 1. "PCSDRN_3_0,Revision Number for XS or PCS MMD This field contains the 4-bit Revision number of vendor-specific XS or PCS MMD." line.word 0xC "SR_VSMMD_AN_ID1,SR Control MMD AN Device Identifier Register 1" hexmask.word 0xC 0.--15. 1. "ANDOUI_3_18,Reserved" line.word 0xE "SR_VSMMD_AN_ID2,SR Control MMD AN Device Identifier Register 2" hexmask.word.byte 0xE 10.--15. 1. "ANDOUI_19_24,Reserved" hexmask.word.byte 0xE 4.--9. 1. "ANDMMN_5_0,Reserved" hexmask.word.byte 0xE 0.--3. 1. "ANDRN_3_0,Reserved" line.word 0x10 "SR_VSMMD_STS,SR Control MMD Status Register" bitfld.word 0x10 14.--15. "VSDP,." "0,1,2,3" group.word 0x12++0x1 line.word 0x0 "SR_VSMMD_CTRL,SR Control MMD Control Register" rbitfld.word 0x0 5. "PD_CTRL,Reserved" "0,1" bitfld.word 0x0 4. "FASTSIM,Fast Simulation Enable When set this bit indicates that the Fast simulation is enabled." "0,1" bitfld.word 0x0 3. "PMA_MMD_EN,PMA MMD Enable When set this bit indicates that the PMA MMD device is accessible." "0,1" bitfld.word 0x0 2. "MII_MMD_EN,VS MMD Enable When set this bit indicates that the vendor-specific MMD1 device is accessible." "0,1" bitfld.word 0x0 1. "PCS_XS_MMD_EN,PCS MMD Enable When set this bit indicates that the PCS MMD device is accessible." "0,1" rbitfld.word 0x0 0. "AN_MMD_EN,Reserved" "0,1" rgroup.word 0x1C++0x3 line.word 0x0 "SR_VSMMD_PKGID1,SR Control MMD Package Identifier Register 1" hexmask.word 0x0 0.--15. 1. "MMDPOUI_3_18,Organizationally Unique Identifier The DWC_xpcs offers 24 configurable bits[24:1] known as OUI for identifying the device manufacturer." line.word 0x2 "SR_VSMMD_PKGID2,." hexmask.word.byte 0x2 10.--15. 1. "MMDPOUI_19_24,Organizationally Unique Identifier The DWC_xpcs offers 24 configurable bits [24:1] known as OUI for identifying the device manufacturer." hexmask.word.byte 0x2 4.--9. 1. "MMDPMMN_5_0,Model Number This field contains the 5-bit Model Number of the package in which the MMDs are present in DWC_xpcs." hexmask.word.byte 0x2 0.--3. 1. "MMDPRN_3_0,Revision Number This field contains the 4-bit revision number of the package in which the MMDs are present in DWC_xpcs." tree.end tree "WAKEUP (Wakeup Domain)" base ad:0x0 tree "BLK_CTRL_WAKEUPMIX" base ad:0x42420000 group.long 0x0++0x3 line.long 0x0 "I3C2_SDA_IRQ,I3C SDA IRQ CONTROL BIT" bitfld.long 0x0 0. "enable,IRQ enable bit" "0,1" group.long 0x8++0x3 line.long 0x0 "CAN_TIMER2,CAN2 TIMER Tick Frequency Config" hexmask.long.word 0x0 0.--9. 1. "TICK_STEP,I3C SDA IRQ CONTROL BIT" group.long 0x14++0x3 line.long 0x0 "DEXSC_ERR,DEXSC error response configuration" bitfld.long 0x0 2. "M7_LOCK_ERR_RESP_EN,Lock bit of M7_ERR_RESP_EN and M7_EXC_ERR_RESP_EN" "0,1" bitfld.long 0x0 1. "M7_EXC_ERR_RESP_EN,ocram dexsc exclusive error response enable" "0,1" bitfld.long 0x0 0. "M7_ERR_RESP_EN,M7 TCM gasket exclusive error response enable" "0,1" rgroup.long 0x18++0x3 line.long 0x0 "EARC_PLL_STATUS,EARC Audio PLL status bits" bitfld.long 0x0 2. "earc_pll_powerup,EARC AUDIO PLL powerup status" "0,1" bitfld.long 0x0 1. "earc_pll_lol,EARC AUDIO PLL loss of lock status" "0,1" bitfld.long 0x0 0. "earc_pll_lock,EARC AUDIO PLL lock status" "0,1" group.long 0x1C++0x3 line.long 0x0 "SAI_CLK_SEL,sai3~5 mclk1~3 clk root mux settings" hexmask.long.byte 0x0 23.--26. 1. "SAI5_MCLK3,SAI5 master clock #3 source selection" hexmask.long.byte 0x0 19.--22. 1. "SAI5_MCLK2,SAI5 master clock #2 source selection" bitfld.long 0x0 18. "SAI5_MCLK1,SAI5 master clock #1 source selection" "0,1" hexmask.long.byte 0x0 14.--17. 1. "SAI4_MCLK3,SAI4 master clock #3 source selection" newline hexmask.long.byte 0x0 10.--13. 1. "SAI4_MCLK2,SAI4 master clock #2 source selection" bitfld.long 0x0 9. "SAI4_MCLK1,SAI4 master clock #1 source selection" "0,1" hexmask.long.byte 0x0 5.--8. 1. "SAI3_MCLK3,SAI3 master clock #3 source selection" hexmask.long.byte 0x0 1.--4. 1. "SAI3_MCLK2,SAI3 master clock #2 source selection" newline bitfld.long 0x0 0. "SAI3_MCLK1,SAI3 master clock #1 source selection" "0,1" rgroup.long 0x20++0x3 line.long 0x0 "VOLT_DETECT,Voltage detectors output" bitfld.long 0x0 5. "supply_detector_ENET,Voltage detectors output of ENET" "0,1" bitfld.long 0x0 4. "supply_detector_CCM_DAP,Voltage detectors output of CCM DAP" "0,1" bitfld.long 0x0 3. "supply_detector_WAKEUP,Voltage detectors output of WAKEUP" "0,1" bitfld.long 0x0 2. "supply_detector_SD2,Voltage detectors output of SD2" "0,1" newline bitfld.long 0x0 1. "supply_detector_GPIO,Voltage detectors output of GPIO" "0,1" bitfld.long 0x0 0. "supply_detector_AON,Voltage detectors output of AON" "0,1" group.long 0x24++0x47 line.long 0x0 "I3C2_WAKEUP,I3C2 WAKEUPX CLR" bitfld.long 0x0 0. "irq_clr,I3C wakeup interrupt clear" "0,1" line.long 0x4 "AXI_ATTR_CFG,AXI CACHE CONTROL BIT" bitfld.long 0x4 5. "awcache_usdhc3,Static value of awcache[1] for AXI initiator usdhc3" "0,1" bitfld.long 0x4 4. "arcache_usdhc3,Static value of arcache[1] for AXI initiator usdhc3" "0,1" bitfld.long 0x4 3. "awcache_usdhc2,Static value of awcache[1] for AXI initiator usdhc2" "0,1" bitfld.long 0x4 2. "arcache_usdhc2,Static value of arcache[1] for AXI initiator usdhc2" "0,1" newline bitfld.long 0x4 1. "awcache_usdhc1,Static value of awcache[1] for AXI initiator usdhc1" "0,1" bitfld.long 0x4 0. "arcache_usdhc1,Static value of arcache[1] for AXI initiator usdhc1" "0,1" line.long 0x8 "IPG_DEBUG_CM33,IPG DEBUG mask bit" bitfld.long 0x8 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x8 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x8 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x8 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x8 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x8 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x8 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x8 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x8 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x8 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x8 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x8 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x8 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x8 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x8 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x8 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x8 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x8 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x8 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x8 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x8 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x8 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x8 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x8 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x8 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x8 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x8 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x8 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x8 3. "can5,CAN5 debug" "0,1" bitfld.long 0x8 2. "can4,CAN4 debug" "0,1" bitfld.long 0x8 1. "can3,CAN3 debug" "0,1" bitfld.long 0x8 0. "can2,CAN2 debug" "0,1" line.long 0xC "IPG_DEBUG_CA55C0,IPG DEBUG mask bit for CA55 core0" bitfld.long 0xC 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0xC 30. "sai5,SAI5 debug" "0,1" bitfld.long 0xC 29. "sai4,SAI4 debug" "0,1" bitfld.long 0xC 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0xC 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0xC 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0xC 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0xC 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0xC 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0xC 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0xC 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0xC 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0xC 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0xC 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0xC 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0xC 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0xC 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0xC 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0xC 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0xC 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0xC 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0xC 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0xC 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0xC 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0xC 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0xC 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0xC 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0xC 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0xC 3. "can5,CAN5 debug" "0,1" bitfld.long 0xC 2. "can4,CAN4 debug" "0,1" bitfld.long 0xC 1. "can3,CAN3 debug" "0,1" bitfld.long 0xC 0. "can2,CAN2 debug" "0,1" line.long 0x10 "IPG_DEBUG_CA55C1,IPG DEBUG mask bit for CA55 core1" bitfld.long 0x10 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x10 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x10 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x10 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x10 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x10 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x10 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x10 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x10 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x10 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x10 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x10 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x10 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x10 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x10 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x10 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x10 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x10 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x10 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x10 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x10 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x10 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x10 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x10 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x10 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x10 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x10 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x10 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x10 3. "can5,CAN5 debug" "0,1" bitfld.long 0x10 2. "can4,CAN4 debug" "0,1" bitfld.long 0x10 1. "can3,CAN3 debug" "0,1" bitfld.long 0x10 0. "can2,CAN2 debug" "0,1" line.long 0x14 "IPG_DEBUG_CA55C2,IPG DEBUG mask bit for CA55 core2" bitfld.long 0x14 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x14 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x14 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x14 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x14 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x14 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x14 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x14 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x14 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x14 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x14 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x14 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x14 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x14 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x14 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x14 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x14 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x14 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x14 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x14 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x14 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x14 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x14 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x14 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x14 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x14 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x14 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x14 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x14 3. "can5,CAN5 debug" "0,1" bitfld.long 0x14 2. "can4,CAN4 debug" "0,1" bitfld.long 0x14 1. "can3,CAN3 debug" "0,1" bitfld.long 0x14 0. "can2,CAN2 debug" "0,1" line.long 0x18 "IPG_DEBUG_CA55C3,IPG DEBUG mask bit for CA55 core3" bitfld.long 0x18 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x18 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x18 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x18 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x18 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x18 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x18 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x18 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x18 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x18 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x18 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x18 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x18 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x18 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x18 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x18 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x18 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x18 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x18 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x18 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x18 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x18 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x18 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x18 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x18 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x18 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x18 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x18 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x18 3. "can5,CAN5 debug" "0,1" bitfld.long 0x18 2. "can4,CAN4 debug" "0,1" bitfld.long 0x18 1. "can3,CAN3 debug" "0,1" bitfld.long 0x18 0. "can2,CAN2 debug" "0,1" line.long 0x1C "IPG_DEBUG_CA55C4,IPG DEBUG mask bit for CA55 core4" bitfld.long 0x1C 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x1C 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x1C 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x1C 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x1C 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x1C 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x1C 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x1C 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x1C 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x1C 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x1C 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x1C 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x1C 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x1C 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x1C 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x1C 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x1C 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x1C 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x1C 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x1C 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x1C 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x1C 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x1C 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x1C 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x1C 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x1C 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x1C 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x1C 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x1C 3. "can5,CAN5 debug" "0,1" bitfld.long 0x1C 2. "can4,CAN4 debug" "0,1" bitfld.long 0x1C 1. "can3,CAN3 debug" "0,1" bitfld.long 0x1C 0. "can2,CAN2 debug" "0,1" line.long 0x20 "IPG_DEBUG_CA55C5,IPG DEBUG mask bit for CA55 core5" bitfld.long 0x20 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x20 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x20 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x20 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x20 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x20 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x20 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x20 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x20 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x20 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x20 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x20 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x20 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x20 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x20 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x20 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x20 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x20 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x20 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x20 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x20 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x20 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x20 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x20 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x20 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x20 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x20 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x20 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x20 3. "can5,CAN5 debug" "0,1" bitfld.long 0x20 2. "can4,CAN4 debug" "0,1" bitfld.long 0x20 1. "can3,CAN3 debug" "0,1" bitfld.long 0x20 0. "can2,CAN2 debug" "0,1" line.long 0x24 "IPG_DEBUG_CM7,IPG DEBUG mask bit" bitfld.long 0x24 31. "edma2,EDMA2 debug" "0,1" bitfld.long 0x24 30. "sai5,SAI5 debug" "0,1" bitfld.long 0x24 29. "sai4,SAI4 debug" "0,1" bitfld.long 0x24 28. "sai3,SAI3 debug" "0,1" newline bitfld.long 0x24 27. "i3c2,I3C2 debug" "0,1" bitfld.long 0x24 26. "wdog5,WDOG5 debug" "0,1" bitfld.long 0x24 25. "wdog4,WDOG4 debug" "0,1" bitfld.long 0x24 24. "wdog3,WDOG3 debug" "0,1" newline bitfld.long 0x24 23. "tpm6,TPM6 debug" "0,1" bitfld.long 0x24 22. "tpm5,TPM5 debug" "0,1" bitfld.long 0x24 21. "tpm4,TPM4 debug" "0,1" bitfld.long 0x24 20. "tpm3,TPM3 debug" "0,1" newline bitfld.long 0x24 19. "lptmr2,TMR2 debug" "0,1" bitfld.long 0x24 18. "lpspi8,SPI8 debug" "0,1" bitfld.long 0x24 17. "lpspi7,SPI7 debug" "0,1" bitfld.long 0x24 16. "lpspi6,SPI6 debug" "0,1" newline bitfld.long 0x24 15. "lpspi5,SPI5 debug" "0,1" bitfld.long 0x24 14. "lpspi4,SPI4 debug" "0,1" bitfld.long 0x24 13. "lpspi3,IT3 debug" "0,1" bitfld.long 0x24 12. "lpit2,IT2 debug" "0,1" newline bitfld.long 0x24 11. "lpi2c8,I2C8 debug" "0,1" bitfld.long 0x24 10. "lpi2c7,I2C7 debug" "0,1" bitfld.long 0x24 9. "lpi2c6,I2C6 debug" "0,1" bitfld.long 0x24 8. "lpi2c5,I2C5 debug" "0,1" newline bitfld.long 0x24 7. "lpi2c4,I2C4 debug" "0,1" bitfld.long 0x24 6. "lpi2c3,I2C3 debug" "0,1" bitfld.long 0x24 5. "flexio2,FlexIO2 debug" "0,1" bitfld.long 0x24 4. "flexio1,FlexIO1 debug" "0,1" newline bitfld.long 0x24 3. "can5,CAN5 debug" "0,1" bitfld.long 0x24 2. "can4,CAN4 debug" "0,1" bitfld.long 0x24 1. "can3,CAN3 debug" "0,1" bitfld.long 0x24 0. "can2,CAN2 debug" "0,1" line.long 0x28 "IPG_DEBUG_2_CM33,IPG DEBUG mask bit" bitfld.long 0x28 0. "edma3,EDMA3 debug" "0,1" line.long 0x2C "IPG_DEBUG_2_CA55C0,IPG DEBUG mask bit for CA55 core0" bitfld.long 0x2C 0. "edma3,EDMA3 debug" "0,1" line.long 0x30 "IPG_DEBUG_2_CA55C1,IPG DEBUG mask bit for CA55 core1" bitfld.long 0x30 0. "edma3,EDMA3 debug" "0,1" line.long 0x34 "IPG_DEBUG_2_CA55C2,IPG DEBUG mask bit for CA55 core2" bitfld.long 0x34 0. "edma3,EDMA3 debug" "0,1" line.long 0x38 "IPG_DEBUG_2_CA55C3,IPG DEBUG mask bit for CA55 core3" bitfld.long 0x38 0. "edma3,EDMA3 debug" "0,1" line.long 0x3C "IPG_DEBUG_2_CA55C4,IPG DEBUG mask bit for CA55 core4" bitfld.long 0x3C 0. "edma3,EDMA3 debug" "0,1" line.long 0x40 "IPG_DEBUG_2_CA55C5,IPG DEBUG mask bit for CA55 core5" bitfld.long 0x40 0. "edma3,EDMA3 debug" "0,1" line.long 0x44 "IPG_DEBUG_2_CM7,IPG DEBUG mask bit" bitfld.long 0x44 0. "edma3,EDMA3 debug" "0,1" group.long 0x80++0x3 line.long 0x0 "SMMU_SETUP,SMMU TBU static configuration" bitfld.long 0x0 9. "tbu_acp_sec_override,SMMU TBU ACP static setting: SEC override" "0,1" bitfld.long 0x0 8. "tbu_acp_utlb_roundrobin,SMMU TBU ACP static setting: UTLB roundrobin" "0,1" bitfld.long 0x0 5. "tbu_ma2_sec_override,SMMU TBU MA2 static setting: SEC override" "0,1" bitfld.long 0x0 4. "tbu_ma2_utlb_roundrobin,SMMU TBU MA2 static setting: UTLB roundrobin" "0,1" newline bitfld.long 0x0 1. "tbu_ma1_sec_override,SMMU TBU MA1 static setting: SEC override" "0,1" bitfld.long 0x0 0. "tbu_ma1_utlb_roundrobin,SMMU TBU MA1 static setting: UTLB roundrobin" "0,1" tree.end tree "WAKEUP_ATU" tree "ATUA" base ad:0x42760000 group.long 0x0++0x7 line.long 0x0 "ATUCR,ATU Control Register" bitfld.long 0x0 3. "Spare1,Spare 1 - Reserved" "?,1: Reserved" bitfld.long 0x0 2. "Spare2,Spare 2 - Reserved" "0,1" newline bitfld.long 0x0 1. "Spare3,Spare 3 - Reserved" "0,1" bitfld.long 0x0 0. "Spare4,Spare 4 - Reserved" "0,1" line.long 0x4 "ATUSR,ATU Status Register" rbitfld.long 0x4 7. "PGERR_W7,Programming Error on Window 7" "0: No programming error was detected for this window,1: A programming error was detected for this window" rbitfld.long 0x4 6. "PGERR_W6,Programming Error on Window 6" "0: No programming error was detected for this window,1: A programming error was detected for this window" newline rbitfld.long 0x4 5. "PGERR_W5,Programming Error on Window 5" "0: No programming error was detected for this window,1: A programming error was detected for this window" rbitfld.long 0x4 4. "PGERR_W4,Programming Error on Window 4" "0: No programming error was detected for this window,1: A programming error was detected for this window" newline rbitfld.long 0x4 3. "PGERR_W3,Programming Error on Window 3" "0: No programming error was detected for this window,1: A programming error was detected for this window" rbitfld.long 0x4 2. "PGERR_W2,Programming Error on Window 2" "0: No programming error was detected for this window,1: A programming error was detected for this window" newline rbitfld.long 0x4 1. "PGERR_W1,Programming Error on Window 1" "0: No programming error was detected for this window,1: A programming error was detected for this window" eventfld.long 0x4 0. "MISS_ALL,Miss all" "0: No window misses have been detected,1: At least one transaction has been received which.." rgroup.long 0x8++0x7 line.long 0x0 "IP_REV_1,IP Block Revision 1 Register" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP Block ID. This value is 0x0304." hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision. For the first release this value is 0x01." newline hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision. For the first release this value is 0x00." line.long 0x4 "IP_REV_2,IP Block Revision 2 Register" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,Integration options. For the first release this value is 0x00." hexmask.long.byte 0x4 8.--15. 1. "IP_ERR,Errata revision level. For the first release this value is 0x00." newline hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,Configuration options. For the first release this value is 0x00." group.long 0x1C++0x3 line.long 0x0 "PMCR,Performance Monitor Register" bitfld.long 0x0 30.--31. "PM1_TYP,Programmable Performance Monitor 1 Type This field is used in conjunction with the PM1_SEL field." "0: This performance monitor event is disabled,1: This performance monitor event is enabled for..,2: This performance monitor event is enabled for..,3: This performance monitor event is enabled for.." bitfld.long 0x0 27.--29. "TM1_VAL,Task Mark 1 Value If TM1_MSK != 3'b000 Performance monitor event 1 is enabled only when the following is true: [Access' Task Mark & PMCR[TM1MSK] == TM1_VAL] If TM1_MSK==3'h0 & TM1_VAL==3'h0 then the task mark is ignored for Performance monitor.." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "TM1_MSK,Task Mark 1 Mask See usage in definition of PMCR[TM1_VAL]." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 16.--23. 1. "PM1_SEL,Programmable Performance Monitor 1 Selection xxxxxxx1 This performance monitor event pulses once for each transaction matching window 0 xxxxxx1x This performance monitor event pulses once for each transaction matching window 1 xxxxx1xx This.." newline bitfld.long 0x0 14.--15. "PM2_TYP,Programmable Performance Monitor 2 Type Encodings for this field are the same as in the PM1_TYP field" "0,1,2,3" bitfld.long 0x0 11.--13. "TM2_VAL,Task Mark 2 Value If TM2_MSK != 3'b000 Performance monitor event 2 is enabled only when the following is true: [Access' Task Mark & PMCR[TM2MSK] == TM2_VAL] If TM2_MSK==3'h0 & TM2_VAL==3'h0 then the task mark is ignored for Performance monitor.." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 8.--10. "TM2_MSK,Task Mark 2 Mask See usage in definition of PMCR[TM2_VAL]." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "PM2_SEL,Programmable Performance Monitor 2 Selection Encodings for this field are the same as in the PM1_SEL field" group.long 0x104++0x7 line.long 0x0 "ACORE_OWAR0,Outbound Window Attributes Register 0" rbitfld.long 0x0 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" rbitfld.long 0x0 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline rbitfld.long 0x0 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x0 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x0 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x0 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x0 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x4 "ACORE_OTEAR0,Outbound Translated Extended Address Register 0" hexmask.long 0x4 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" group.long 0x110++0x6F line.long 0x0 "ACORE_OWBAR1,Outbound Window Base Address Register 1" hexmask.long.word 0x0 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x0 0.--4. 1. "OWS,Outbound Window Size" line.long 0x4 "ACORE_OWAR1,Outbound Window Attributes Register 1" bitfld.long 0x4 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x4 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x4 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x4 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x4 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x4 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x4 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x8 "ACORE_OTEAR1,Outbound Translated Extended Address Register 1" hexmask.long 0x8 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0xC "ACORE_OTAR1,Outbound Translated Address Register 1" hexmask.long.word 0xC 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x10 "ACORE_OWBAR2,Outbound Window Base Address Register 2" hexmask.long.word 0x10 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x10 0.--4. 1. "OWS,Outbound Window Size" line.long 0x14 "ACORE_OWAR2,Outbound Window Attributes Register 2" bitfld.long 0x14 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x14 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x14 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x14 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x14 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x14 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x14 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x18 "ACORE_OTEAR2,Outbound Translated Extended Address Register 2" hexmask.long 0x18 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x1C "ACORE_OTAR2,Outbound Translated Address Register 2" hexmask.long.word 0x1C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x20 "ACORE_OWBAR3,Outbound Window Base Address Register 3" hexmask.long.word 0x20 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x20 0.--4. 1. "OWS,Outbound Window Size" line.long 0x24 "ACORE_OWAR3,Outbound Window Attributes Register 3" bitfld.long 0x24 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x24 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x24 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x24 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x24 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x24 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x24 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x28 "ACORE_OTEAR3,Outbound Translated Extended Address Register 3" hexmask.long 0x28 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x2C "ACORE_OTAR3,Outbound Translated Address Register 3" hexmask.long.word 0x2C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x30 "ACORE_OWBAR4,Outbound Window Base Address Register 4" hexmask.long.word 0x30 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x30 0.--4. 1. "OWS,Outbound Window Size" line.long 0x34 "ACORE_OWAR4,Outbound Window Attributes Register 4" bitfld.long 0x34 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x34 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x34 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x34 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x34 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x34 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x38 "ACORE_OTEAR4,Outbound Translated Extended Address Register 4" hexmask.long 0x38 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x3C "ACORE_OTAR4,Outbound Translated Address Register 4" hexmask.long.word 0x3C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x40 "ACORE_OWBAR5,Outbound Window Base Address Register 5" hexmask.long.word 0x40 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x40 0.--4. 1. "OWS,Outbound Window Size" line.long 0x44 "ACORE_OWAR5,Outbound Window Attributes Register 5" bitfld.long 0x44 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x44 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x44 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x44 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x44 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x44 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x44 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x48 "ACORE_OTEAR5,Outbound Translated Extended Address Register 5" hexmask.long 0x48 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x4C "ACORE_OTAR5,Outbound Translated Address Register 5" hexmask.long.word 0x4C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x50 "ACORE_OWBAR6,Outbound Window Base Address Register 6" hexmask.long.word 0x50 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x50 0.--4. 1. "OWS,Outbound Window Size" line.long 0x54 "ACORE_OWAR6,Outbound Window Attributes Register 6" bitfld.long 0x54 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x54 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x54 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x54 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x54 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x54 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x54 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x58 "ACORE_OTEAR6,Outbound Translated Extended Address Register 6" hexmask.long 0x58 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x5C "ACORE_OTAR6,Outbound Translated Address Register 6" hexmask.long.word 0x5C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x60 "ACORE_OWBAR7,Outbound Window Base Address Register 7" hexmask.long.word 0x60 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x60 0.--4. 1. "OWS,Outbound Window Size" line.long 0x64 "ACORE_OWAR7,Outbound Window Attributes Register 7" bitfld.long 0x64 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x64 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x64 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x64 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x64 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x64 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x64 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x68 "ACORE_OTEAR7,Outbound Translated Extended Address Register 7" hexmask.long 0x68 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x6C "ACORE_OTAR7,Outbound Translated Address Register 7" hexmask.long.word 0x6C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" tree.end tree "ATUM" base ad:0x42770000 group.long 0x0++0x7 line.long 0x0 "ATUCR,ATU Control Register" bitfld.long 0x0 3. "Spare1,Spare 1 - Reserved" "?,1: Reserved" bitfld.long 0x0 2. "Spare2,Spare 2 - Reserved" "0,1" newline bitfld.long 0x0 1. "Spare3,Spare 3 - Reserved" "0,1" bitfld.long 0x0 0. "Spare4,Spare 4 - Reserved" "0,1" line.long 0x4 "ATUSR,ATU Status Register" rbitfld.long 0x4 7. "PGERR_W7,Programming Error on Window 7" "0: No programming error was detected for this window,1: A programming error was detected for this window" rbitfld.long 0x4 6. "PGERR_W6,Programming Error on Window 6" "0: No programming error was detected for this window,1: A programming error was detected for this window" newline rbitfld.long 0x4 5. "PGERR_W5,Programming Error on Window 5" "0: No programming error was detected for this window,1: A programming error was detected for this window" rbitfld.long 0x4 4. "PGERR_W4,Programming Error on Window 4" "0: No programming error was detected for this window,1: A programming error was detected for this window" newline rbitfld.long 0x4 3. "PGERR_W3,Programming Error on Window 3" "0: No programming error was detected for this window,1: A programming error was detected for this window" rbitfld.long 0x4 2. "PGERR_W2,Programming Error on Window 2" "0: No programming error was detected for this window,1: A programming error was detected for this window" newline rbitfld.long 0x4 1. "PGERR_W1,Programming Error on Window 1" "0: No programming error was detected for this window,1: A programming error was detected for this window" eventfld.long 0x4 0. "MISS_ALL,Miss all" "0: No window misses have been detected,1: At least one transaction has been received which.." rgroup.long 0x8++0x7 line.long 0x0 "IP_REV_1,IP Block Revision 1 Register" hexmask.long.word 0x0 16.--31. 1. "IP_ID,IP Block ID. This value is 0x0304." hexmask.long.byte 0x0 8.--15. 1. "IP_MJ,Major revision. For the first release this value is 0x01." newline hexmask.long.byte 0x0 0.--7. 1. "IP_MN,Minor revision. For the first release this value is 0x00." line.long 0x4 "IP_REV_2,IP Block Revision 2 Register" hexmask.long.byte 0x4 16.--23. 1. "IP_INT,Integration options. For the first release this value is 0x00." hexmask.long.byte 0x4 8.--15. 1. "IP_ERR,Errata revision level. For the first release this value is 0x00." newline hexmask.long.byte 0x4 0.--7. 1. "IP_CFG,Configuration options. For the first release this value is 0x00." group.long 0x1C++0x3 line.long 0x0 "PMCR,Performance Monitor Register" bitfld.long 0x0 30.--31. "PM1_TYP,Programmable Performance Monitor 1 Type This field is used in conjunction with the PM1_SEL field." "0: This performance monitor event is disabled,1: This performance monitor event is enabled for..,2: This performance monitor event is enabled for..,3: This performance monitor event is enabled for.." bitfld.long 0x0 27.--29. "TM1_VAL,Task Mark 1 Value If TM1_MSK != 3'b000 Performance monitor event 1 is enabled only when the following is true: [Access' Task Mark & PMCR[TM1MSK] == TM1_VAL] If TM1_MSK==3'h0 & TM1_VAL==3'h0 then the task mark is ignored for Performance monitor.." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24.--26. "TM1_MSK,Task Mark 1 Mask See usage in definition of PMCR[TM1_VAL]." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 16.--23. 1. "PM1_SEL,Programmable Performance Monitor 1 Selection xxxxxxx1 This performance monitor event pulses once for each transaction matching window 0 xxxxxx1x This performance monitor event pulses once for each transaction matching window 1 xxxxx1xx This.." newline bitfld.long 0x0 14.--15. "PM2_TYP,Programmable Performance Monitor 2 Type Encodings for this field are the same as in the PM1_TYP field" "0,1,2,3" bitfld.long 0x0 11.--13. "TM2_VAL,Task Mark 2 Value If TM2_MSK != 3'b000 Performance monitor event 2 is enabled only when the following is true: [Access' Task Mark & PMCR[TM2MSK] == TM2_VAL] If TM2_MSK==3'h0 & TM2_VAL==3'h0 then the task mark is ignored for Performance monitor.." "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 8.--10. "TM2_MSK,Task Mark 2 Mask See usage in definition of PMCR[TM2_VAL]." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "PM2_SEL,Programmable Performance Monitor 2 Selection Encodings for this field are the same as in the PM1_SEL field" group.long 0x104++0x7 line.long 0x0 "ACORE_OWAR0,Outbound Window Attributes Register 0" rbitfld.long 0x0 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" rbitfld.long 0x0 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline rbitfld.long 0x0 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x0 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x0 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x0 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x0 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x4 "ACORE_OTEAR0,Outbound Translated Extended Address Register 0" hexmask.long 0x4 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" group.long 0x110++0x6F line.long 0x0 "ACORE_OWBAR1,Outbound Window Base Address Register 1" hexmask.long.word 0x0 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x0 0.--4. 1. "OWS,Outbound Window Size" line.long 0x4 "ACORE_OWAR1,Outbound Window Attributes Register 1" bitfld.long 0x4 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x4 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x4 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x4 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x4 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x4 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x4 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x8 "ACORE_OTEAR1,Outbound Translated Extended Address Register 1" hexmask.long 0x8 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0xC "ACORE_OTAR1,Outbound Translated Address Register 1" hexmask.long.word 0xC 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x10 "ACORE_OWBAR2,Outbound Window Base Address Register 2" hexmask.long.word 0x10 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x10 0.--4. 1. "OWS,Outbound Window Size" line.long 0x14 "ACORE_OWAR2,Outbound Window Attributes Register 2" bitfld.long 0x14 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x14 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x14 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x14 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x14 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x14 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x14 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x18 "ACORE_OTEAR2,Outbound Translated Extended Address Register 2" hexmask.long 0x18 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x1C "ACORE_OTAR2,Outbound Translated Address Register 2" hexmask.long.word 0x1C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x20 "ACORE_OWBAR3,Outbound Window Base Address Register 3" hexmask.long.word 0x20 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x20 0.--4. 1. "OWS,Outbound Window Size" line.long 0x24 "ACORE_OWAR3,Outbound Window Attributes Register 3" bitfld.long 0x24 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x24 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x24 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x24 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x24 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x24 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x24 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x28 "ACORE_OTEAR3,Outbound Translated Extended Address Register 3" hexmask.long 0x28 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x2C "ACORE_OTAR3,Outbound Translated Address Register 3" hexmask.long.word 0x2C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x30 "ACORE_OWBAR4,Outbound Window Base Address Register 4" hexmask.long.word 0x30 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x30 0.--4. 1. "OWS,Outbound Window Size" line.long 0x34 "ACORE_OWAR4,Outbound Window Attributes Register 4" bitfld.long 0x34 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x34 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x34 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x34 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x34 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x34 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x34 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x38 "ACORE_OTEAR4,Outbound Translated Extended Address Register 4" hexmask.long 0x38 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x3C "ACORE_OTAR4,Outbound Translated Address Register 4" hexmask.long.word 0x3C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x40 "ACORE_OWBAR5,Outbound Window Base Address Register 5" hexmask.long.word 0x40 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x40 0.--4. 1. "OWS,Outbound Window Size" line.long 0x44 "ACORE_OWAR5,Outbound Window Attributes Register 5" bitfld.long 0x44 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x44 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x44 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x44 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x44 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x44 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x44 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x48 "ACORE_OTEAR5,Outbound Translated Extended Address Register 5" hexmask.long 0x48 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x4C "ACORE_OTAR5,Outbound Translated Address Register 5" hexmask.long.word 0x4C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x50 "ACORE_OWBAR6,Outbound Window Base Address Register 6" hexmask.long.word 0x50 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x50 0.--4. 1. "OWS,Outbound Window Size" line.long 0x54 "ACORE_OWAR6,Outbound Window Attributes Register 6" bitfld.long 0x54 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x54 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x54 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x54 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x54 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x54 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x54 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x58 "ACORE_OTEAR6,Outbound Translated Extended Address Register 6" hexmask.long 0x58 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x5C "ACORE_OTAR6,Outbound Translated Address Register 6" hexmask.long.word 0x5C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x60 "ACORE_OWBAR7,Outbound Window Base Address Register 7" hexmask.long.word 0x60 16.--31. 1. "WBA,Window Base Address When the uppermost n address bits (n = 16-ACORE_OWBARn[OWS]) of any transaction received from the CTSI match this value the transaction 'hits' on this window" hexmask.long.byte 0x60 0.--4. 1. "OWS,Outbound Window Size" line.long 0x64 "ACORE_OWAR7,Outbound Window Attributes Register 7" bitfld.long 0x64 31. "EN,Enable This bit is read-only as 1'b1 for the default window (window 0)." "0: Disable outbound translation window,1: Enable outbound translation window" bitfld.long 0x64 30. "I,Instruction Access If ACORE_OWARn[D] = 1'b1 this bit must contain the value 1'b0" "0: Instruction attribute of received transaction is..,1: Received transaction must be an instruction.." newline bitfld.long 0x64 29. "D,Data Access If ACORE_OWARn[I] = 1'b1 this bit must contain the value 1'b0" "0: Data attribute of received transaction is..,1: Received transaction must be a data access to.." bitfld.long 0x64 18. "PL,PL (Privileged Level) bit PL attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" newline bitfld.long 0x64 17. "BMT,BMT (Bypass Memory Translation) bit BMT attribute that is attached to the outgoing transaction on an appropriate window match for steering it to its correct destination in the SoC's address space" "0,1" bitfld.long 0x64 16. "VA,VA (Virtual Address) bit VA attribute that is attached to the outgoing transaction on an appropriate window match for providing additional information about the transaction" "0,1" newline hexmask.long.word 0x64 0.--14. 1. "ICID,Isolation Context 15-bit ICID that is attached to the outgoing transaction on an appropriate window match" line.long 0x68 "ACORE_OTEAR7,Outbound Translated Extended Address Register 7" hexmask.long 0x68 0.--31. 1. "TEA,Translated Extended Address Provides the uppermost 32-bits (bits [63:32]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" line.long 0x6C "ACORE_OTAR7,Outbound Translated Address Register 7" hexmask.long.word 0x6C 16.--31. 1. "TA,Translated Address Provides up to 16-bits (bits [31:16-ACORE_OWBARn[OWS]]) of a 64-bit SoC address when there is a match on the corresponding ACORE_OWBRn registers" tree.end tree.end tree "WAKEUP_AUDIO_XCVR" base ad:0x42680000 group.long 0x0++0x3 line.long 0x0 "VERSION,Version control register" hexmask.long 0x0 0.--31. 1. "VERID,Version ID" group.long 0x10++0x4F line.long 0x0 "EXT_CTRL,External control register" bitfld.long 0x0 31. "CORE_RESET,M0+ Reset" "0,1" bitfld.long 0x0 30. "RX_CMDC_RESET,Soft reset to the eARC Common mode Receiver" "0,1" bitfld.long 0x0 29. "TX_CMDC_RESET,Soft reset to the eARC Common mode Transmitter" "0,1" bitfld.long 0x0 28. "RX_DPATH_RESET,Soft reset to the eARC Differential data Receiver" "0,1" newline bitfld.long 0x0 27. "TX_DPATH_RESET,Soft reset to the Datapath for Transmit" "0,1" bitfld.long 0x0 25. "SDMA_RD_REQ_DIS,SDMA RD REQ disable" "0,1" bitfld.long 0x0 24. "SDMA_WR_REQ_DIS,SDMA WR REQ disable" "0,1" bitfld.long 0x0 23. "SPDIF_MODE,Indicates SPDIF output mode." "0,1" newline bitfld.long 0x0 22. "CORE_WAIT,Stop executing code" "0,1" bitfld.long 0x0 21. "CORE_SLEEP_HOLD_REQ_B,Hold core from going to sleep mode when 0." "0,1" hexmask.long.byte 0x0 16.--19. 1. "PAGE,Page Select." bitfld.long 0x0 15. "FABRIC_RR_SEL,Selects Arbitration mode of crossbar switch." "0,1" newline hexmask.long.byte 0x0 8.--14. 1. "RX_FIFO_WMARK,Audio Receive FIFO Watermark Level" hexmask.long.byte 0x0 0.--6. 1. "TX_FIFO_WMARK,Audio Transmit FIFO Watermark Level" line.long 0x4 "EXT_CTRL_SET,External control register" bitfld.long 0x4 31. "CORE_RESET,M0+ Reset" "0,1" bitfld.long 0x4 30. "RX_CMDC_RESET,Soft reset to the eARC Common mode Receiver" "0,1" bitfld.long 0x4 29. "TX_CMDC_RESET,Soft reset to the eARC Common mode Transmitter" "0,1" bitfld.long 0x4 28. "RX_DPATH_RESET,Soft reset to the eARC Differential data Receiver" "0,1" newline bitfld.long 0x4 27. "TX_DPATH_RESET,Soft reset to the Datapath for Transmit" "0,1" bitfld.long 0x4 25. "SDMA_RD_REQ_DIS,SDMA RD REQ disable" "0,1" bitfld.long 0x4 24. "SDMA_WR_REQ_DIS,SDMA WR REQ disable" "0,1" bitfld.long 0x4 23. "SPDIF_MODE,Indicates SPDIF output mode." "0,1" newline bitfld.long 0x4 22. "CORE_WAIT,Stop executing code" "0,1" bitfld.long 0x4 21. "CORE_SLEEP_HOLD_REQ_B,Hold core from going to sleep mode when 0." "0,1" hexmask.long.byte 0x4 16.--19. 1. "PAGE,Page Select." bitfld.long 0x4 15. "FABRIC_RR_SEL,Selects Arbitration mode of crossbar switch." "0,1" newline hexmask.long.byte 0x4 8.--14. 1. "RX_FIFO_WMARK,Audio Receive FIFO Watermark Level" hexmask.long.byte 0x4 0.--6. 1. "TX_FIFO_WMARK,Audio Transmit FIFO Watermark Level" line.long 0x8 "EXT_CTRL_CLR,External control register" eventfld.long 0x8 31. "CORE_RESET,M0+ Reset" "0,1" eventfld.long 0x8 30. "RX_CMDC_RESET,Soft reset to the eARC Common mode Receiver" "0,1" eventfld.long 0x8 29. "TX_CMDC_RESET,Soft reset to the eARC Common mode Transmitter" "0,1" eventfld.long 0x8 28. "RX_DPATH_RESET,Soft reset to the eARC Differential data Receiver" "0,1" newline eventfld.long 0x8 27. "TX_DPATH_RESET,Soft reset to the Datapath for Transmit" "0,1" eventfld.long 0x8 25. "SDMA_RD_REQ_DIS,SDMA RD REQ disable" "0,1" eventfld.long 0x8 24. "SDMA_WR_REQ_DIS,SDMA WR REQ disable" "0,1" eventfld.long 0x8 23. "SPDIF_MODE,Indicates SPDIF output mode." "0,1" newline eventfld.long 0x8 22. "CORE_WAIT,Stop executing code" "0,1" eventfld.long 0x8 21. "CORE_SLEEP_HOLD_REQ_B,Hold core from going to sleep mode when 0." "0,1" hexmask.long.byte 0x8 16.--19. 1. "PAGE,Page Select." eventfld.long 0x8 15. "FABRIC_RR_SEL,Selects Arbitration mode of crossbar switch." "0,1" newline hexmask.long.byte 0x8 8.--14. 1. "RX_FIFO_WMARK,Audio Receive FIFO Watermark Level" hexmask.long.byte 0x8 0.--6. 1. "TX_FIFO_WMARK,Audio Transmit FIFO Watermark Level" line.long 0xC "EXT_CTRL_TOG,External control register" bitfld.long 0xC 31. "CORE_RESET,M0+ Reset" "0,1" bitfld.long 0xC 30. "RX_CMDC_RESET,Soft reset to the eARC Common mode Receiver" "0,1" bitfld.long 0xC 29. "TX_CMDC_RESET,Soft reset to the eARC Common mode Transmitter" "0,1" bitfld.long 0xC 28. "RX_DPATH_RESET,Soft reset to the eARC Differential data Receiver" "0,1" newline bitfld.long 0xC 27. "TX_DPATH_RESET,Soft reset to the Datapath for Transmit" "0,1" bitfld.long 0xC 25. "SDMA_RD_REQ_DIS,SDMA RD REQ disable" "0,1" bitfld.long 0xC 24. "SDMA_WR_REQ_DIS,SDMA WR REQ disable" "0,1" bitfld.long 0xC 23. "SPDIF_MODE,Indicates SPDIF output mode." "0,1" newline bitfld.long 0xC 22. "CORE_WAIT,Stop executing code" "0,1" bitfld.long 0xC 21. "CORE_SLEEP_HOLD_REQ_B,Hold core from going to sleep mode when 0." "0,1" hexmask.long.byte 0xC 16.--19. 1. "PAGE,Page Select." bitfld.long 0xC 15. "FABRIC_RR_SEL,Selects Arbitration mode of crossbar switch." "0,1" newline hexmask.long.byte 0xC 8.--14. 1. "RX_FIFO_WMARK,Audio Receive FIFO Watermark Level" hexmask.long.byte 0xC 0.--6. 1. "TX_FIFO_WMARK,Audio Transmit FIFO Watermark Level" line.long 0x10 "EXT_STATUS,External Status register" rbitfld.long 0x10 31. "HPD_I,HPD Input status" "0,1" bitfld.long 0x10 30. "NEW_UD6_REC,New user data" "0,1" bitfld.long 0x10 29. "NEW_UD5_REC,New user data" "0,1" bitfld.long 0x10 28. "NEW_UD4_REC,New user data" "0,1" newline bitfld.long 0x10 27. "HEARTBEAT_STATUS,eARC Connection Status" "0,1" bitfld.long 0x10 25. "RX_CMDC_COMMA_TO,Receiver CMDC comma timeout Interrupt" "0,1" eventfld.long 0x10 23. "RX_CMDC_RESP_TO,CMDC Response not sent in programmed time" "0,1" rbitfld.long 0x10 21. "TX_PIPE_EMPTY,Indicates TX pipe status." "0,1" newline rbitfld.long 0x10 18. "CM0_SLEEP_HOLD_ACK_B,Sleep extension acknowledge." "0,1" rbitfld.long 0x10 17. "CM0_DEEP_SLEEP,CM0 is in deep sleep mode." "0,1" rbitfld.long 0x10 16. "CM0_SLEEPING,CM0 is in Sleep mode." "0,1" hexmask.long.byte 0x10 8.--15. 1. "NO_RX_FIFO_ENTRIES,RX FIFO entries" newline hexmask.long.byte 0x10 0.--7. 1. "NO_TX_FIFO_ENTRIES,TX FIFO entries" line.long 0x14 "EXT_STATUS_SET,External Status register" rbitfld.long 0x14 31. "HPD_I,HPD Input status" "0,1" bitfld.long 0x14 30. "NEW_UD6_REC,New user data" "0,1" bitfld.long 0x14 29. "NEW_UD5_REC,New user data" "0,1" bitfld.long 0x14 28. "NEW_UD4_REC,New user data" "0,1" newline bitfld.long 0x14 27. "HEARTBEAT_STATUS,eARC Connection Status" "0,1" bitfld.long 0x14 25. "RX_CMDC_COMMA_TO,Receiver CMDC comma timeout Interrupt" "0,1" bitfld.long 0x14 23. "RX_CMDC_RESP_TO,CMDC Response not sent in programmed time" "0,1" rbitfld.long 0x14 21. "TX_PIPE_EMPTY,Indicates TX pipe status." "0,1" newline rbitfld.long 0x14 18. "CM0_SLEEP_HOLD_ACK_B,Sleep extension acknowledge." "0,1" rbitfld.long 0x14 17. "CM0_DEEP_SLEEP,CM0 is in deep sleep mode." "0,1" rbitfld.long 0x14 16. "CM0_SLEEPING,CM0 is in Sleep mode." "0,1" hexmask.long.byte 0x14 8.--15. 1. "NO_RX_FIFO_ENTRIES,RX FIFO entries" newline hexmask.long.byte 0x14 0.--7. 1. "NO_TX_FIFO_ENTRIES,TX FIFO entries" line.long 0x18 "EXT_STATUS_CLR,External Status register" eventfld.long 0x18 31. "HPD_I,HPD Input status" "0,1" eventfld.long 0x18 30. "NEW_UD6_REC,New user data" "0,1" eventfld.long 0x18 29. "NEW_UD5_REC,New user data" "0,1" eventfld.long 0x18 28. "NEW_UD4_REC,New user data" "0,1" newline eventfld.long 0x18 27. "HEARTBEAT_STATUS,eARC Connection Status" "0,1" eventfld.long 0x18 25. "RX_CMDC_COMMA_TO,Receiver CMDC comma timeout Interrupt" "0,1" eventfld.long 0x18 23. "RX_CMDC_RESP_TO,CMDC Response not sent in programmed time" "0,1" eventfld.long 0x18 21. "TX_PIPE_EMPTY,Indicates TX pipe status." "0,1" newline eventfld.long 0x18 18. "CM0_SLEEP_HOLD_ACK_B,Sleep extension acknowledge." "0,1" eventfld.long 0x18 17. "CM0_DEEP_SLEEP,CM0 is in deep sleep mode." "0,1" eventfld.long 0x18 16. "CM0_SLEEPING,CM0 is in Sleep mode." "0,1" hexmask.long.byte 0x18 8.--15. 1. "NO_RX_FIFO_ENTRIES,RX FIFO entries" newline hexmask.long.byte 0x18 0.--7. 1. "NO_TX_FIFO_ENTRIES,TX FIFO entries" line.long 0x1C "EXT_STATUS_TOG,External Status register" rbitfld.long 0x1C 31. "HPD_I,HPD Input status" "0,1" bitfld.long 0x1C 30. "NEW_UD6_REC,New user data" "0,1" bitfld.long 0x1C 29. "NEW_UD5_REC,New user data" "0,1" bitfld.long 0x1C 28. "NEW_UD4_REC,New user data" "0,1" newline bitfld.long 0x1C 27. "HEARTBEAT_STATUS,eARC Connection Status" "0,1" bitfld.long 0x1C 25. "RX_CMDC_COMMA_TO,Receiver CMDC comma timeout Interrupt" "0,1" bitfld.long 0x1C 23. "RX_CMDC_RESP_TO,CMDC Response not sent in programmed time" "0,1" rbitfld.long 0x1C 21. "TX_PIPE_EMPTY,Indicates TX pipe status." "0,1" newline rbitfld.long 0x1C 18. "CM0_SLEEP_HOLD_ACK_B,Sleep extension acknowledge." "0,1" rbitfld.long 0x1C 17. "CM0_DEEP_SLEEP,CM0 is in deep sleep mode." "0,1" rbitfld.long 0x1C 16. "CM0_SLEEPING,CM0 is in Sleep mode." "0,1" hexmask.long.byte 0x1C 8.--15. 1. "NO_RX_FIFO_ENTRIES,RX FIFO entries" newline hexmask.long.byte 0x1C 0.--7. 1. "NO_TX_FIFO_ENTRIES,TX FIFO entries" line.long 0x20 "EXT_IER0,Interrupt enables for interrupt 0" hexmask.long.byte 0x20 24.--31. 1. "SPARE_IE_0,Spare interrupts" bitfld.long 0x20 23. "NEW_BLK_RCVD_IE_0,New block of data was received." "0,1" bitfld.long 0x20 22. "CH_UD_OFLOW_IE_0,Channel status or used data could not be stored." "0,1" bitfld.long 0x20 21. "ARC_MODE_IE_0,Interrupt to indicate ARC mode setup." "0,1" newline bitfld.long 0x20 20. "UNEXP_PRE_REC_IE_0,Interrupt enable for unexpected preamble received." "0,1" bitfld.long 0x20 19. "B_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame B preamble mismatch received." "0,1" bitfld.long 0x20 18. "M_W_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" bitfld.long 0x20 17. "PREAMBLE_MATCH_IE_0,Interrupt enable for preamble match received." "0,1" newline bitfld.long 0x20 16. "DMAC_RX_BME_ERR_IE_0,Bi-phase mark encoding error" "0,1" bitfld.long 0x20 15. "DMA_WR_REQ_IE_0,Request to write data to FIFO." "0,1" bitfld.long 0x20 14. "DMA_RD_REQ_IE_0,Request to read data from FIFO." "0,1" bitfld.long 0x20 13. "TEMP_UPDATE_IE_0,Update request for chip temperature value." "0,1" newline bitfld.long 0x20 12. "CMDC_STATUS_UPDATE_IE_0,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x20 11. "HB_STATE_CHG_IE_0,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x20 10. "DMAC_FMT_CHG_DET_IE_0,Indicates DMAC format change was detected" "0,1" bitfld.long 0x20 9. "DMAC_NO_DATA_REC_IE_0,Indicates no DMAC data is received." "0,1" newline bitfld.long 0x20 8. "OHPD_IE_0,Output HPD interrupt enable." "0,1" bitfld.long 0x20 7. "HOST_WAKEUP_IE_0,Host wakeup on CEC match interrupt enable." "0,1" bitfld.long 0x20 6. "FIFO_OFLOW_UFLOW_ERR_IE_0,Receive FIFO overflow error interrupt enable." "0,1" bitfld.long 0x20 5. "PREAMBLE_MISMATCH_IE_0,Preamble mismatch interrupt enable." "0,1" newline bitfld.long 0x20 4. "ECC_ERR_IE_0,60958 Compressed data uncorrectable error interrupt enable" "0,1" bitfld.long 0x20 3. "CMDC_RESP_TO_IE_0,Receiver CMDC data response timeout interrupt enable" "0,1" bitfld.long 0x20 2. "MUTE_IE_0,Enable for Mute detected interrupt" "0,1" bitfld.long 0x20 1. "NEW_UD_IE_0,Enable for new user data received interrupt" "0,1" newline bitfld.long 0x20 0. "NEW_CS_IE_0,Enable for New channel status block received interrupt" "0,1" line.long 0x24 "EXT_IER0_SET,Interrupt enables for interrupt 0" hexmask.long.byte 0x24 24.--31. 1. "SPARE_IE_0,Spare interrupts" bitfld.long 0x24 23. "NEW_BLK_RCVD_IE_0,New block of data was received." "0,1" bitfld.long 0x24 22. "CH_UD_OFLOW_IE_0,Channel status or used data could not be stored." "0,1" bitfld.long 0x24 21. "ARC_MODE_IE_0,Interrupt to indicate ARC mode setup." "0,1" newline bitfld.long 0x24 20. "UNEXP_PRE_REC_IE_0,Interrupt enable for unexpected preamble received." "0,1" bitfld.long 0x24 19. "B_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame B preamble mismatch received." "0,1" bitfld.long 0x24 18. "M_W_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" bitfld.long 0x24 17. "PREAMBLE_MATCH_IE_0,Interrupt enable for preamble match received." "0,1" newline bitfld.long 0x24 16. "DMAC_RX_BME_ERR_IE_0,Bi-phase mark encoding error" "0,1" bitfld.long 0x24 15. "DMA_WR_REQ_IE_0,Request to write data to FIFO." "0,1" bitfld.long 0x24 14. "DMA_RD_REQ_IE_0,Request to read data from FIFO." "0,1" bitfld.long 0x24 13. "TEMP_UPDATE_IE_0,Update request for chip temperature value." "0,1" newline bitfld.long 0x24 12. "CMDC_STATUS_UPDATE_IE_0,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x24 11. "HB_STATE_CHG_IE_0,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x24 10. "DMAC_FMT_CHG_DET_IE_0,Indicates DMAC format change was detected" "0,1" bitfld.long 0x24 9. "DMAC_NO_DATA_REC_IE_0,Indicates no DMAC data is received." "0,1" newline bitfld.long 0x24 8. "OHPD_IE_0,Output HPD interrupt enable." "0,1" bitfld.long 0x24 7. "HOST_WAKEUP_IE_0,Host wakeup on CEC match interrupt enable." "0,1" bitfld.long 0x24 6. "FIFO_OFLOW_UFLOW_ERR_IE_0,Receive FIFO overflow error interrupt enable." "0,1" bitfld.long 0x24 5. "PREAMBLE_MISMATCH_IE_0,Preamble mismatch interrupt enable." "0,1" newline bitfld.long 0x24 4. "ECC_ERR_IE_0,60958 Compressed data uncorrectable error interrupt enable" "0,1" bitfld.long 0x24 3. "CMDC_RESP_TO_IE_0,Receiver CMDC data response timeout interrupt enable" "0,1" bitfld.long 0x24 2. "MUTE_IE_0,Enable for Mute detected interrupt" "0,1" bitfld.long 0x24 1. "NEW_UD_IE_0,Enable for new user data received interrupt" "0,1" newline bitfld.long 0x24 0. "NEW_CS_IE_0,Enable for New channel status block received interrupt" "0,1" line.long 0x28 "EXT_IER0_CLR,Interrupt enables for interrupt 0" hexmask.long.byte 0x28 24.--31. 1. "SPARE_IE_0,Spare interrupts" eventfld.long 0x28 23. "NEW_BLK_RCVD_IE_0,New block of data was received." "0,1" eventfld.long 0x28 22. "CH_UD_OFLOW_IE_0,Channel status or used data could not be stored." "0,1" eventfld.long 0x28 21. "ARC_MODE_IE_0,Interrupt to indicate ARC mode setup." "0,1" newline eventfld.long 0x28 20. "UNEXP_PRE_REC_IE_0,Interrupt enable for unexpected preamble received." "0,1" eventfld.long 0x28 19. "B_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame B preamble mismatch received." "0,1" eventfld.long 0x28 18. "M_W_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" eventfld.long 0x28 17. "PREAMBLE_MATCH_IE_0,Interrupt enable for preamble match received." "0,1" newline eventfld.long 0x28 16. "DMAC_RX_BME_ERR_IE_0,Bi-phase mark encoding error" "0,1" eventfld.long 0x28 15. "DMA_WR_REQ_IE_0,Request to write data to FIFO." "0,1" eventfld.long 0x28 14. "DMA_RD_REQ_IE_0,Request to read data from FIFO." "0,1" eventfld.long 0x28 13. "TEMP_UPDATE_IE_0,Update request for chip temperature value." "0,1" newline eventfld.long 0x28 12. "CMDC_STATUS_UPDATE_IE_0,Interrupt enable for CMDC status register update." "0,1" eventfld.long 0x28 11. "HB_STATE_CHG_IE_0,Interrupt enable for Heartbeat status change" "0,1" eventfld.long 0x28 10. "DMAC_FMT_CHG_DET_IE_0,Indicates DMAC format change was detected" "0,1" eventfld.long 0x28 9. "DMAC_NO_DATA_REC_IE_0,Indicates no DMAC data is received." "0,1" newline eventfld.long 0x28 8. "OHPD_IE_0,Output HPD interrupt enable." "0,1" eventfld.long 0x28 7. "HOST_WAKEUP_IE_0,Host wakeup on CEC match interrupt enable." "0,1" eventfld.long 0x28 6. "FIFO_OFLOW_UFLOW_ERR_IE_0,Receive FIFO overflow error interrupt enable." "0,1" eventfld.long 0x28 5. "PREAMBLE_MISMATCH_IE_0,Preamble mismatch interrupt enable." "0,1" newline eventfld.long 0x28 4. "ECC_ERR_IE_0,60958 Compressed data uncorrectable error interrupt enable" "0,1" eventfld.long 0x28 3. "CMDC_RESP_TO_IE_0,Receiver CMDC data response timeout interrupt enable" "0,1" eventfld.long 0x28 2. "MUTE_IE_0,Enable for Mute detected interrupt" "0,1" eventfld.long 0x28 1. "NEW_UD_IE_0,Enable for new user data received interrupt" "0,1" newline eventfld.long 0x28 0. "NEW_CS_IE_0,Enable for New channel status block received interrupt" "0,1" line.long 0x2C "EXT_IER0_TOG,Interrupt enables for interrupt 0" hexmask.long.byte 0x2C 24.--31. 1. "SPARE_IE_0,Spare interrupts" bitfld.long 0x2C 23. "NEW_BLK_RCVD_IE_0,New block of data was received." "0,1" bitfld.long 0x2C 22. "CH_UD_OFLOW_IE_0,Channel status or used data could not be stored." "0,1" bitfld.long 0x2C 21. "ARC_MODE_IE_0,Interrupt to indicate ARC mode setup." "0,1" newline bitfld.long 0x2C 20. "UNEXP_PRE_REC_IE_0,Interrupt enable for unexpected preamble received." "0,1" bitfld.long 0x2C 19. "B_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame B preamble mismatch received." "0,1" bitfld.long 0x2C 18. "M_W_PRE_MISMATCH_IE_0,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" bitfld.long 0x2C 17. "PREAMBLE_MATCH_IE_0,Interrupt enable for preamble match received." "0,1" newline bitfld.long 0x2C 16. "DMAC_RX_BME_ERR_IE_0,Bi-phase mark encoding error" "0,1" bitfld.long 0x2C 15. "DMA_WR_REQ_IE_0,Request to write data to FIFO." "0,1" bitfld.long 0x2C 14. "DMA_RD_REQ_IE_0,Request to read data from FIFO." "0,1" bitfld.long 0x2C 13. "TEMP_UPDATE_IE_0,Update request for chip temperature value." "0,1" newline bitfld.long 0x2C 12. "CMDC_STATUS_UPDATE_IE_0,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x2C 11. "HB_STATE_CHG_IE_0,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x2C 10. "DMAC_FMT_CHG_DET_IE_0,Indicates DMAC format change was detected" "0,1" bitfld.long 0x2C 9. "DMAC_NO_DATA_REC_IE_0,Indicates no DMAC data is received." "0,1" newline bitfld.long 0x2C 8. "OHPD_IE_0,Output HPD interrupt enable." "0,1" bitfld.long 0x2C 7. "HOST_WAKEUP_IE_0,Host wakeup on CEC match interrupt enable." "0,1" bitfld.long 0x2C 6. "FIFO_OFLOW_UFLOW_ERR_IE_0,Receive FIFO overflow error interrupt enable." "0,1" bitfld.long 0x2C 5. "PREAMBLE_MISMATCH_IE_0,Preamble mismatch interrupt enable." "0,1" newline bitfld.long 0x2C 4. "ECC_ERR_IE_0,60958 Compressed data uncorrectable error interrupt enable" "0,1" bitfld.long 0x2C 3. "CMDC_RESP_TO_IE_0,Receiver CMDC data response timeout interrupt enable" "0,1" bitfld.long 0x2C 2. "MUTE_IE_0,Enable for Mute detected interrupt" "0,1" bitfld.long 0x2C 1. "NEW_UD_IE_0,Enable for new user data received interrupt" "0,1" newline bitfld.long 0x2C 0. "NEW_CS_IE_0,Enable for New channel status block received interrupt" "0,1" line.long 0x30 "EXT_IER1,Interrupt enables for interrupt 1" hexmask.long.byte 0x30 24.--31. 1. "SPARE_IE_1,Spare interrupt enables." bitfld.long 0x30 23. "NEW_BLK_RCVD_IE_1,New block of data was received." "0,1" bitfld.long 0x30 22. "CH_UD_OFLOW_IE_1,Channel status or used data could not be stored." "0,1" bitfld.long 0x30 21. "ARC_MODE_IE_1,Interrupt to indicate ARC mode setup." "0,1" newline bitfld.long 0x30 20. "UNEXP_PRE_REC_IE_1,Interrupt enable for Unexpected preamble received." "0,1" bitfld.long 0x30 19. "B_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame B preamble mismatch received." "0,1" bitfld.long 0x30 18. "M_W_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" bitfld.long 0x30 17. "PREAMBLE_MATCH_IE_1,Interrupt enable for preamble match received." "0,1" newline bitfld.long 0x30 16. "DMAC_RX_BME_ERR_IE_1,Bi-phase mark encoding error" "0,1" bitfld.long 0x30 15. "DMA_WR_REQ_IE_1,Request to write data to FIFO." "0,1" bitfld.long 0x30 14. "DMA_RD_REQ_IE_1,Request to read data from FIFO." "0,1" bitfld.long 0x30 13. "TEMP_UPDATE_IE_1,Update request for chip temperature value." "0,1" newline bitfld.long 0x30 12. "CMDC_STATUS_UPDATE_IE_1,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x30 11. "HB_STATE_CHG_IE_1,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x30 10. "DMAC_FMT_CHG_DET_IE_1,Indicates DMAC format change was detected" "0,1" bitfld.long 0x30 9. "DMAC_NO_DATA_REC_IE_1,Indicates no DMAC data is received." "0,1" newline bitfld.long 0x30 8. "OHPD_IE_1,Output HPD interrupt enable." "0,1" bitfld.long 0x30 7. "HOST_WAKEUP_IE_1,Host wakeup on CEC match interrupt enable." "0,1" bitfld.long 0x30 6. "FIFO_OFLOW_UFLOW_ERR_IE_1,Receive FIFO overflow error interrupt enable." "0,1" bitfld.long 0x30 5. "PREAMBLE_MISMATCH_IE_1,Preamble mismatch interrupt enable." "0,1" newline bitfld.long 0x30 4. "ECC_ERR_IE_1,60958 Compressed data uncorrectable error interrupt enable" "0,1" bitfld.long 0x30 3. "CMDC_RESP_TO_IE_1,Receiver CMDC data response timeout interrupt enable" "0,1" bitfld.long 0x30 2. "MUTE_IE_1,Enable for Mute detected interrupt" "0,1" bitfld.long 0x30 1. "NEW_UD_IE_1,Enable for new user data received interrupt" "0,1" newline bitfld.long 0x30 0. "NEW_CS_IE_1,Enable for New channel status block received interrupt" "0,1" line.long 0x34 "EXT_IER1_SET,Interrupt enables for interrupt 1" hexmask.long.byte 0x34 24.--31. 1. "SPARE_IE_1,Spare interrupt enables." bitfld.long 0x34 23. "NEW_BLK_RCVD_IE_1,New block of data was received." "0,1" bitfld.long 0x34 22. "CH_UD_OFLOW_IE_1,Channel status or used data could not be stored." "0,1" bitfld.long 0x34 21. "ARC_MODE_IE_1,Interrupt to indicate ARC mode setup." "0,1" newline bitfld.long 0x34 20. "UNEXP_PRE_REC_IE_1,Interrupt enable for Unexpected preamble received." "0,1" bitfld.long 0x34 19. "B_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame B preamble mismatch received." "0,1" bitfld.long 0x34 18. "M_W_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" bitfld.long 0x34 17. "PREAMBLE_MATCH_IE_1,Interrupt enable for preamble match received." "0,1" newline bitfld.long 0x34 16. "DMAC_RX_BME_ERR_IE_1,Bi-phase mark encoding error" "0,1" bitfld.long 0x34 15. "DMA_WR_REQ_IE_1,Request to write data to FIFO." "0,1" bitfld.long 0x34 14. "DMA_RD_REQ_IE_1,Request to read data from FIFO." "0,1" bitfld.long 0x34 13. "TEMP_UPDATE_IE_1,Update request for chip temperature value." "0,1" newline bitfld.long 0x34 12. "CMDC_STATUS_UPDATE_IE_1,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x34 11. "HB_STATE_CHG_IE_1,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x34 10. "DMAC_FMT_CHG_DET_IE_1,Indicates DMAC format change was detected" "0,1" bitfld.long 0x34 9. "DMAC_NO_DATA_REC_IE_1,Indicates no DMAC data is received." "0,1" newline bitfld.long 0x34 8. "OHPD_IE_1,Output HPD interrupt enable." "0,1" bitfld.long 0x34 7. "HOST_WAKEUP_IE_1,Host wakeup on CEC match interrupt enable." "0,1" bitfld.long 0x34 6. "FIFO_OFLOW_UFLOW_ERR_IE_1,Receive FIFO overflow error interrupt enable." "0,1" bitfld.long 0x34 5. "PREAMBLE_MISMATCH_IE_1,Preamble mismatch interrupt enable." "0,1" newline bitfld.long 0x34 4. "ECC_ERR_IE_1,60958 Compressed data uncorrectable error interrupt enable" "0,1" bitfld.long 0x34 3. "CMDC_RESP_TO_IE_1,Receiver CMDC data response timeout interrupt enable" "0,1" bitfld.long 0x34 2. "MUTE_IE_1,Enable for Mute detected interrupt" "0,1" bitfld.long 0x34 1. "NEW_UD_IE_1,Enable for new user data received interrupt" "0,1" newline bitfld.long 0x34 0. "NEW_CS_IE_1,Enable for New channel status block received interrupt" "0,1" line.long 0x38 "EXT_IER1_CLR,Interrupt enables for interrupt 1" hexmask.long.byte 0x38 24.--31. 1. "SPARE_IE_1,Spare interrupt enables." eventfld.long 0x38 23. "NEW_BLK_RCVD_IE_1,New block of data was received." "0,1" eventfld.long 0x38 22. "CH_UD_OFLOW_IE_1,Channel status or used data could not be stored." "0,1" eventfld.long 0x38 21. "ARC_MODE_IE_1,Interrupt to indicate ARC mode setup." "0,1" newline eventfld.long 0x38 20. "UNEXP_PRE_REC_IE_1,Interrupt enable for Unexpected preamble received." "0,1" eventfld.long 0x38 19. "B_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame B preamble mismatch received." "0,1" eventfld.long 0x38 18. "M_W_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" eventfld.long 0x38 17. "PREAMBLE_MATCH_IE_1,Interrupt enable for preamble match received." "0,1" newline eventfld.long 0x38 16. "DMAC_RX_BME_ERR_IE_1,Bi-phase mark encoding error" "0,1" eventfld.long 0x38 15. "DMA_WR_REQ_IE_1,Request to write data to FIFO." "0,1" eventfld.long 0x38 14. "DMA_RD_REQ_IE_1,Request to read data from FIFO." "0,1" eventfld.long 0x38 13. "TEMP_UPDATE_IE_1,Update request for chip temperature value." "0,1" newline eventfld.long 0x38 12. "CMDC_STATUS_UPDATE_IE_1,Interrupt enable for CMDC status register update." "0,1" eventfld.long 0x38 11. "HB_STATE_CHG_IE_1,Interrupt enable for Heartbeat status change" "0,1" eventfld.long 0x38 10. "DMAC_FMT_CHG_DET_IE_1,Indicates DMAC format change was detected" "0,1" eventfld.long 0x38 9. "DMAC_NO_DATA_REC_IE_1,Indicates no DMAC data is received." "0,1" newline eventfld.long 0x38 8. "OHPD_IE_1,Output HPD interrupt enable." "0,1" eventfld.long 0x38 7. "HOST_WAKEUP_IE_1,Host wakeup on CEC match interrupt enable." "0,1" eventfld.long 0x38 6. "FIFO_OFLOW_UFLOW_ERR_IE_1,Receive FIFO overflow error interrupt enable." "0,1" eventfld.long 0x38 5. "PREAMBLE_MISMATCH_IE_1,Preamble mismatch interrupt enable." "0,1" newline eventfld.long 0x38 4. "ECC_ERR_IE_1,60958 Compressed data uncorrectable error interrupt enable" "0,1" eventfld.long 0x38 3. "CMDC_RESP_TO_IE_1,Receiver CMDC data response timeout interrupt enable" "0,1" eventfld.long 0x38 2. "MUTE_IE_1,Enable for Mute detected interrupt" "0,1" eventfld.long 0x38 1. "NEW_UD_IE_1,Enable for new user data received interrupt" "0,1" newline eventfld.long 0x38 0. "NEW_CS_IE_1,Enable for New channel status block received interrupt" "0,1" line.long 0x3C "EXT_IER1_TOG,Interrupt enables for interrupt 1" hexmask.long.byte 0x3C 24.--31. 1. "SPARE_IE_1,Spare interrupt enables." bitfld.long 0x3C 23. "NEW_BLK_RCVD_IE_1,New block of data was received." "0,1" bitfld.long 0x3C 22. "CH_UD_OFLOW_IE_1,Channel status or used data could not be stored." "0,1" bitfld.long 0x3C 21. "ARC_MODE_IE_1,Interrupt to indicate ARC mode setup." "0,1" newline bitfld.long 0x3C 20. "UNEXP_PRE_REC_IE_1,Interrupt enable for Unexpected preamble received." "0,1" bitfld.long 0x3C 19. "B_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame B preamble mismatch received." "0,1" bitfld.long 0x3C 18. "M_W_PRE_MISMATCH_IE_1,Interrupt enable for sub-frame M/W preamble mismatch received." "0,1" bitfld.long 0x3C 17. "PREAMBLE_MATCH_IE_1,Interrupt enable for preamble match received." "0,1" newline bitfld.long 0x3C 16. "DMAC_RX_BME_ERR_IE_1,Bi-phase mark encoding error" "0,1" bitfld.long 0x3C 15. "DMA_WR_REQ_IE_1,Request to write data to FIFO." "0,1" bitfld.long 0x3C 14. "DMA_RD_REQ_IE_1,Request to read data from FIFO." "0,1" bitfld.long 0x3C 13. "TEMP_UPDATE_IE_1,Update request for chip temperature value." "0,1" newline bitfld.long 0x3C 12. "CMDC_STATUS_UPDATE_IE_1,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x3C 11. "HB_STATE_CHG_IE_1,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x3C 10. "DMAC_FMT_CHG_DET_IE_1,Indicates DMAC format change was detected" "0,1" bitfld.long 0x3C 9. "DMAC_NO_DATA_REC_IE_1,Indicates no DMAC data is received." "0,1" newline bitfld.long 0x3C 8. "OHPD_IE_1,Output HPD interrupt enable." "0,1" bitfld.long 0x3C 7. "HOST_WAKEUP_IE_1,Host wakeup on CEC match interrupt enable." "0,1" bitfld.long 0x3C 6. "FIFO_OFLOW_UFLOW_ERR_IE_1,Receive FIFO overflow error interrupt enable." "0,1" bitfld.long 0x3C 5. "PREAMBLE_MISMATCH_IE_1,Preamble mismatch interrupt enable." "0,1" newline bitfld.long 0x3C 4. "ECC_ERR_IE_1,60958 Compressed data uncorrectable error interrupt enable" "0,1" bitfld.long 0x3C 3. "CMDC_RESP_TO_IE_1,Receiver CMDC data response timeout interrupt enable" "0,1" bitfld.long 0x3C 2. "MUTE_IE_1,Enable for Mute detected interrupt" "0,1" bitfld.long 0x3C 1. "NEW_UD_IE_1,Enable for new user data received interrupt" "0,1" newline bitfld.long 0x3C 0. "NEW_CS_IE_1,Enable for New channel status block received interrupt" "0,1" line.long 0x40 "EXT_ISR,External Interrupt Status register" hexmask.long.byte 0x40 24.--31. 1. "SPARE_INT,Extra interrupt. Currently not driven. Can be set by M0" eventfld.long 0x40 23. "NEW_BLK_RCVD,New block of data was received." "0,1" bitfld.long 0x40 22. "CS_OR_UD_OFLOW,Channel status or used data could not be stored." "0,1" bitfld.long 0x40 21. "SEL_ARC_MODE,Set when CMDC SM falls out of eARC mode." "0,1" newline eventfld.long 0x40 20. "UNEXP_PRE_REC,Set when DMAC preamble was received after unexpected number of input bits." "0,1" eventfld.long 0x40 19. "B_PRE_MISMATCH,Set when DMAC preamble of B has an error." "0,1" eventfld.long 0x40 18. "M_W_PRE_MISMATCH,Set when DMAC preamble of M/W has an error." "0,1" bitfld.long 0x40 17. "PREAMBLE_MATCH_INT,Interrupt to indicate PA PB / DTC CD preamble match was detected." "0,1" newline eventfld.long 0x40 16. "RX_BME_BIT_ERR,Set when DMAC BME data has an error." "0,1" eventfld.long 0x40 15. "DMA_WR_REQ,Set when DMA write request is asserted." "0,1" eventfld.long 0x40 14. "DMA_RD_REQ,Set when DMA read request is asserted." "0,1" bitfld.long 0x40 13. "TEMP_UPDATE_INT,Interrupt to get the new temperature value." "0,1" newline bitfld.long 0x40 12. "CMDC_STATUS_UPDATE,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x40 11. "HB_STATE_CHG,Interrupt enable for Heartbeat status change" "0,1" eventfld.long 0x40 10. "FMT_CHG_DET,Format change detect interrupt" "0,1" eventfld.long 0x40 9. "DMAC_NO_DATA_REC,No DMAC data is received for 1us." "0,1" newline bitfld.long 0x40 8. "OHPD,HPD output driver" "0,1" bitfld.long 0x40 7. "HOST_WAKEUP,Host wakeup on CEC OPCODE match interrupt." "0,1" eventfld.long 0x40 6. "FIFO_OFLOW_UFLOW_ERR,Receive FIFO overflow error interrupt" "0,1" eventfld.long 0x40 5. "PREAMBLE_MISMATCH,Preamble mismatch interrupt" "0,1" newline eventfld.long 0x40 4. "ECC_ERR,60958 Compressed data uncorrectable error interrupt" "0,1" rbitfld.long 0x40 3. "CMDC_RESP_TO_ERR,CMDC response timeout interrupt" "0,1" eventfld.long 0x40 2. "MUTE_DET,Interrupt to indicate HW mute bit was detected." "0,1" bitfld.long 0x40 1. "RX_NEW_USR_DATA,Received new User data Information" "0,1" newline bitfld.long 0x40 0. "RX_NEW_CH_STAT,Received new channel status block" "0,1" line.long 0x44 "EXT_ISR_SET,External Interrupt Status register" hexmask.long.byte 0x44 24.--31. 1. "SPARE_INT,Extra interrupt. Currently not driven. Can be set by M0" bitfld.long 0x44 23. "NEW_BLK_RCVD,New block of data was received." "0,1" bitfld.long 0x44 22. "CS_OR_UD_OFLOW,Channel status or used data could not be stored." "0,1" bitfld.long 0x44 21. "SEL_ARC_MODE,Set when CMDC SM falls out of eARC mode." "0,1" newline bitfld.long 0x44 20. "UNEXP_PRE_REC,Set when DMAC preamble was received after unexpected number of input bits." "0,1" bitfld.long 0x44 19. "B_PRE_MISMATCH,Set when DMAC preamble of B has an error." "0,1" bitfld.long 0x44 18. "M_W_PRE_MISMATCH,Set when DMAC preamble of M/W has an error." "0,1" bitfld.long 0x44 17. "PREAMBLE_MATCH_INT,Interrupt to indicate PA PB / DTC CD preamble match was detected." "0,1" newline bitfld.long 0x44 16. "RX_BME_BIT_ERR,Set when DMAC BME data has an error." "0,1" bitfld.long 0x44 15. "DMA_WR_REQ,Set when DMA write request is asserted." "0,1" bitfld.long 0x44 14. "DMA_RD_REQ,Set when DMA read request is asserted." "0,1" bitfld.long 0x44 13. "TEMP_UPDATE_INT,Interrupt to get the new temperature value." "0,1" newline bitfld.long 0x44 12. "CMDC_STATUS_UPDATE,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x44 11. "HB_STATE_CHG,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x44 10. "FMT_CHG_DET,Format change detect interrupt" "0,1" bitfld.long 0x44 9. "DMAC_NO_DATA_REC,No DMAC data is received for 1us." "0,1" newline bitfld.long 0x44 8. "OHPD,HPD output driver" "0,1" bitfld.long 0x44 7. "HOST_WAKEUP,Host wakeup on CEC OPCODE match interrupt." "0,1" bitfld.long 0x44 6. "FIFO_OFLOW_UFLOW_ERR,Receive FIFO overflow error interrupt" "0,1" bitfld.long 0x44 5. "PREAMBLE_MISMATCH,Preamble mismatch interrupt" "0,1" newline bitfld.long 0x44 4. "ECC_ERR,60958 Compressed data uncorrectable error interrupt" "0,1" rbitfld.long 0x44 3. "CMDC_RESP_TO_ERR,CMDC response timeout interrupt" "0,1" bitfld.long 0x44 2. "MUTE_DET,Interrupt to indicate HW mute bit was detected." "0,1" bitfld.long 0x44 1. "RX_NEW_USR_DATA,Received new User data Information" "0,1" newline bitfld.long 0x44 0. "RX_NEW_CH_STAT,Received new channel status block" "0,1" line.long 0x48 "EXT_ISR_CLR,External Interrupt Status register" hexmask.long.byte 0x48 24.--31. 1. "SPARE_INT,Extra interrupt. Currently not driven. Can be set by M0" eventfld.long 0x48 23. "NEW_BLK_RCVD,New block of data was received." "0,1" eventfld.long 0x48 22. "CS_OR_UD_OFLOW,Channel status or used data could not be stored." "0,1" eventfld.long 0x48 21. "SEL_ARC_MODE,Set when CMDC SM falls out of eARC mode." "0,1" newline eventfld.long 0x48 20. "UNEXP_PRE_REC,Set when DMAC preamble was received after unexpected number of input bits." "0,1" eventfld.long 0x48 19. "B_PRE_MISMATCH,Set when DMAC preamble of B has an error." "0,1" eventfld.long 0x48 18. "M_W_PRE_MISMATCH,Set when DMAC preamble of M/W has an error." "0,1" eventfld.long 0x48 17. "PREAMBLE_MATCH_INT,Interrupt to indicate PA PB / DTC CD preamble match was detected." "0,1" newline eventfld.long 0x48 16. "RX_BME_BIT_ERR,Set when DMAC BME data has an error." "0,1" eventfld.long 0x48 15. "DMA_WR_REQ,Set when DMA write request is asserted." "0,1" eventfld.long 0x48 14. "DMA_RD_REQ,Set when DMA read request is asserted." "0,1" eventfld.long 0x48 13. "TEMP_UPDATE_INT,Interrupt to get the new temperature value." "0,1" newline eventfld.long 0x48 12. "CMDC_STATUS_UPDATE,Interrupt enable for CMDC status register update." "0,1" eventfld.long 0x48 11. "HB_STATE_CHG,Interrupt enable for Heartbeat status change" "0,1" eventfld.long 0x48 10. "FMT_CHG_DET,Format change detect interrupt" "0,1" eventfld.long 0x48 9. "DMAC_NO_DATA_REC,No DMAC data is received for 1us." "0,1" newline eventfld.long 0x48 8. "OHPD,HPD output driver" "0,1" eventfld.long 0x48 7. "HOST_WAKEUP,Host wakeup on CEC OPCODE match interrupt." "0,1" eventfld.long 0x48 6. "FIFO_OFLOW_UFLOW_ERR,Receive FIFO overflow error interrupt" "0,1" eventfld.long 0x48 5. "PREAMBLE_MISMATCH,Preamble mismatch interrupt" "0,1" newline eventfld.long 0x48 4. "ECC_ERR,60958 Compressed data uncorrectable error interrupt" "0,1" eventfld.long 0x48 3. "CMDC_RESP_TO_ERR,CMDC response timeout interrupt" "0,1" eventfld.long 0x48 2. "MUTE_DET,Interrupt to indicate HW mute bit was detected." "0,1" eventfld.long 0x48 1. "RX_NEW_USR_DATA,Received new User data Information" "0,1" newline eventfld.long 0x48 0. "RX_NEW_CH_STAT,Received new channel status block" "0,1" line.long 0x4C "EXT_ISR_TOG,External Interrupt Status register" hexmask.long.byte 0x4C 24.--31. 1. "SPARE_INT,Extra interrupt. Currently not driven. Can be set by M0" bitfld.long 0x4C 23. "NEW_BLK_RCVD,New block of data was received." "0,1" bitfld.long 0x4C 22. "CS_OR_UD_OFLOW,Channel status or used data could not be stored." "0,1" bitfld.long 0x4C 21. "SEL_ARC_MODE,Set when CMDC SM falls out of eARC mode." "0,1" newline bitfld.long 0x4C 20. "UNEXP_PRE_REC,Set when DMAC preamble was received after unexpected number of input bits." "0,1" bitfld.long 0x4C 19. "B_PRE_MISMATCH,Set when DMAC preamble of B has an error." "0,1" bitfld.long 0x4C 18. "M_W_PRE_MISMATCH,Set when DMAC preamble of M/W has an error." "0,1" bitfld.long 0x4C 17. "PREAMBLE_MATCH_INT,Interrupt to indicate PA PB / DTC CD preamble match was detected." "0,1" newline bitfld.long 0x4C 16. "RX_BME_BIT_ERR,Set when DMAC BME data has an error." "0,1" bitfld.long 0x4C 15. "DMA_WR_REQ,Set when DMA write request is asserted." "0,1" bitfld.long 0x4C 14. "DMA_RD_REQ,Set when DMA read request is asserted." "0,1" bitfld.long 0x4C 13. "TEMP_UPDATE_INT,Interrupt to get the new temperature value." "0,1" newline bitfld.long 0x4C 12. "CMDC_STATUS_UPDATE,Interrupt enable for CMDC status register update." "0,1" bitfld.long 0x4C 11. "HB_STATE_CHG,Interrupt enable for Heartbeat status change" "0,1" bitfld.long 0x4C 10. "FMT_CHG_DET,Format change detect interrupt" "0,1" bitfld.long 0x4C 9. "DMAC_NO_DATA_REC,No DMAC data is received for 1us." "0,1" newline bitfld.long 0x4C 8. "OHPD,HPD output driver" "0,1" bitfld.long 0x4C 7. "HOST_WAKEUP,Host wakeup on CEC OPCODE match interrupt." "0,1" bitfld.long 0x4C 6. "FIFO_OFLOW_UFLOW_ERR,Receive FIFO overflow error interrupt" "0,1" bitfld.long 0x4C 5. "PREAMBLE_MISMATCH,Preamble mismatch interrupt" "0,1" newline bitfld.long 0x4C 4. "ECC_ERR,60958 Compressed data uncorrectable error interrupt" "0,1" rbitfld.long 0x4C 3. "CMDC_RESP_TO_ERR,CMDC response timeout interrupt" "0,1" bitfld.long 0x4C 2. "MUTE_DET,Interrupt to indicate HW mute bit was detected." "0,1" bitfld.long 0x4C 1. "RX_NEW_USR_DATA,Received new User data Information" "0,1" newline bitfld.long 0x4C 0. "RX_NEW_CH_STAT,Received new channel status block" "0,1" group.long 0x90++0x13 line.long 0x0 "PHY_AI_CTRL,AI interface control register" bitfld.long 0x0 31. "AI_RWB,AI Read / write control bit" "0,1" rbitfld.long 0x0 27. "TOG_DONE_1,AI toggle done bit" "0,1" bitfld.long 0x0 26. "TOG_1,AI toggle bit" "0,1" rbitfld.long 0x0 25. "TOG_DONE_0,AI toggle done bit" "0,1" newline bitfld.long 0x0 24. "TOG_0,AI toggle bit" "0,1" bitfld.long 0x0 15. "AI_RESETN,AI reset bit" "0,1" hexmask.long.byte 0x0 0.--7. 1. "AI_ADDR,AI ADDR value" line.long 0x4 "PHY_AI_CTRL_SET,AI interface control register" bitfld.long 0x4 31. "AI_RWB,AI Read / write control bit" "0,1" rbitfld.long 0x4 27. "TOG_DONE_1,AI toggle done bit" "0,1" bitfld.long 0x4 26. "TOG_1,AI toggle bit" "0,1" rbitfld.long 0x4 25. "TOG_DONE_0,AI toggle done bit" "0,1" newline bitfld.long 0x4 24. "TOG_0,AI toggle bit" "0,1" bitfld.long 0x4 15. "AI_RESETN,AI reset bit" "0,1" hexmask.long.byte 0x4 0.--7. 1. "AI_ADDR,AI ADDR value" line.long 0x8 "PHY_AI_CTRL_CLR,AI interface control register" eventfld.long 0x8 31. "AI_RWB,AI Read / write control bit" "0,1" eventfld.long 0x8 27. "TOG_DONE_1,AI toggle done bit" "0,1" eventfld.long 0x8 26. "TOG_1,AI toggle bit" "0,1" eventfld.long 0x8 25. "TOG_DONE_0,AI toggle done bit" "0,1" newline eventfld.long 0x8 24. "TOG_0,AI toggle bit" "0,1" eventfld.long 0x8 15. "AI_RESETN,AI reset bit" "0,1" hexmask.long.byte 0x8 0.--7. 1. "AI_ADDR,AI ADDR value" line.long 0xC "PHY_AI_CTRL_TOG,AI interface control register" bitfld.long 0xC 31. "AI_RWB,AI Read / write control bit" "0,1" rbitfld.long 0xC 27. "TOG_DONE_1,AI toggle done bit" "0,1" bitfld.long 0xC 26. "TOG_1,AI toggle bit" "0,1" rbitfld.long 0xC 25. "TOG_DONE_0,AI toggle done bit" "0,1" newline bitfld.long 0xC 24. "TOG_0,AI toggle bit" "0,1" bitfld.long 0xC 15. "AI_RESETN,AI reset bit" "0,1" hexmask.long.byte 0xC 0.--7. 1. "AI_ADDR,AI ADDR value" line.long 0x10 "PHY_AI_WDATA,AI interface WDATA register" hexmask.long 0x10 0.--31. 1. "WDATA,Write data" rgroup.long 0xA4++0x7 line.long 0x0 "PHY_AI_RDATA,AI interface RDATA register" hexmask.long 0x0 0.--31. 1. "RDATA,Read data" line.long 0x4 "DPATH_STATUS,AUDIO XCVR datapath status" hexmask.long.byte 0x4 8.--15. 1. "TX_FRM_CNT,Count of transmitted frames in a block" hexmask.long.byte 0x4 0.--7. 1. "RX_FRM_CNT,Count of received frames in a block" group.long 0xC0++0xF line.long 0x0 "RX_CMDC_CTRL,CMDC receiver control register" bitfld.long 0x0 31. "LBACK_EN,Loopback enable" "0,1" bitfld.long 0x0 20.--22. "TX_DRIVE_STOP,Transmitter bus release time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 16.--19. 1. "TURNOVER_TIME,Minimum time before a response is generated" hexmask.long.byte 0x0 8.--12. 1. "RESPONSE_TIME,Transmitter response timeout to a received message" newline bitfld.long 0x0 7. "COMMA_EN,Enables COMMA pattern generation" "0,1" hexmask.long.byte 0x0 0.--4. 1. "COMMA_BITS,Number of repeating bits in COMMA pattern" line.long 0x4 "RX_CMDC_CTRL_SET,CMDC receiver control register" bitfld.long 0x4 31. "LBACK_EN,Loopback enable" "0,1" bitfld.long 0x4 20.--22. "TX_DRIVE_STOP,Transmitter bus release time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x4 16.--19. 1. "TURNOVER_TIME,Minimum time before a response is generated" hexmask.long.byte 0x4 8.--12. 1. "RESPONSE_TIME,Transmitter response timeout to a received message" newline bitfld.long 0x4 7. "COMMA_EN,Enables COMMA pattern generation" "0,1" hexmask.long.byte 0x4 0.--4. 1. "COMMA_BITS,Number of repeating bits in COMMA pattern" line.long 0x8 "RX_CMDC_CTRL_CLR,CMDC receiver control register" eventfld.long 0x8 31. "LBACK_EN,Loopback enable" "0,1" eventfld.long 0x8 20.--22. "TX_DRIVE_STOP,Transmitter bus release time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x8 16.--19. 1. "TURNOVER_TIME,Minimum time before a response is generated" hexmask.long.byte 0x8 8.--12. 1. "RESPONSE_TIME,Transmitter response timeout to a received message" newline eventfld.long 0x8 7. "COMMA_EN,Enables COMMA pattern generation" "0,1" hexmask.long.byte 0x8 0.--4. 1. "COMMA_BITS,Number of repeating bits in COMMA pattern" line.long 0xC "RX_CMDC_CTRL_TOG,CMDC receiver control register" bitfld.long 0xC 31. "LBACK_EN,Loopback enable" "0,1" bitfld.long 0xC 20.--22. "TX_DRIVE_STOP,Transmitter bus release time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0xC 16.--19. 1. "TURNOVER_TIME,Minimum time before a response is generated" hexmask.long.byte 0xC 8.--12. 1. "RESPONSE_TIME,Transmitter response timeout to a received message" newline bitfld.long 0xC 7. "COMMA_EN,Enables COMMA pattern generation" "0,1" hexmask.long.byte 0xC 0.--4. 1. "COMMA_BITS,Number of repeating bits in COMMA pattern" rgroup.long 0xD0++0x3 line.long 0x0 "RX_CMDC_STATUS,eARC receiver CMDC status" hexmask.long.byte 0x0 16.--19. 1. "CMDC_STATE,Current state of the RX CDMC control state machine" group.long 0xE0++0x3 line.long 0x0 "RX_CMDC_TX_DATA,CMDC transmit data register" bitfld.long 0x0 31. "DATA_VALID,Transmit Data Valid" "0,1" hexmask.long 0x0 0.--25. 1. "TX_DATA,Transmit data" group.long 0xF0++0x3 line.long 0x0 "RX_CMDC_RX_DATA,CMDC receive data register" bitfld.long 0x0 31. "CLR_RX_DATA,Clear RX data field and" "0,1" hexmask.long 0x0 0.--25. 1. "RX_DATA,Receive data" group.long 0x180++0xF line.long 0x0 "RX_DATAPATH_CTRL,Data path control register" bitfld.long 0x0 30.--31. "FSM,IEC60958-1 Frame Synchronization Mode" "0,1,2,3" bitfld.long 0x0 29. "COMP,Compressed data search mode" "0,1" bitfld.long 0x0 28. "PRC,Process Compressed" "0,1" bitfld.long 0x0 27. "LAYB_MODE,Layout B" "0,1" newline bitfld.long 0x0 26. "LAYB_CTRL,Layout B mode control" "0,1" bitfld.long 0x0 25. "FMT_CHG_MODE,Format change detected. Reset HW for next frame" "0,1" bitfld.long 0x0 24. "FMT_CHG_CTRL,Format Change detection control." "0,1" bitfld.long 0x0 23. "MUTE_MODE,Mute mode control" "0,1" newline bitfld.long 0x0 22. "MUTE_CTRL,M0+ mute request" "0,1" bitfld.long 0x0 21. "BLKC,Block Compressed data" "0,1" bitfld.long 0x0 20. "DTS_CDS,Enable DTS CD 14 preamble search" "0,1" bitfld.long 0x0 19. "PABS,Enable preamble search" "0,1" newline bitfld.long 0x0 14.--15. "RX_DATA_FMT,Indicates format of data stored in memory." "0,1,2,3" bitfld.long 0x0 13. "DIS_B_PRE_ERR_CHK,RX_DATAPATH: Disable B preamble error check." "0,1" bitfld.long 0x0 12. "CLR_RX_FIFO,Clear Receive FIFO" "0,1" bitfld.long 0x0 11. "CSA,Channel Status Acknowledge" "0,1" newline bitfld.long 0x0 10. "UDA,User Data Acknowledge" "0,1" bitfld.long 0x0 9. "CSR,Channel Status reset" "0,1" bitfld.long 0x0 8. "UDR,User data reset" "0,1" bitfld.long 0x0 7. "EN_PARITY_CALC,Enable Parity calculation." "0,1" newline bitfld.long 0x0 6. "STORE_FMT,Receive Data store format." "0,1" bitfld.long 0x0 5. "RST_PKT_CNT_FIFO,Resets the packet count fifo." "0,1" bitfld.long 0x0 4. "EN_COMP_PARITY_CALC,RX_DATAPATH: Enable Compressed mode Parity calculation." "0,1" bitfld.long 0x0 3. "ECC_VUC_BITS_EN,RX_DATAPATH: Enable VUC bit replacement after ECC correction." "0,1" newline rbitfld.long 0x0 0. "PAPB_FIFO_STATUS,This bit is an empty fifo indicator for PaPb match." "0,1" line.long 0x4 "RX_DATAPATH_CTRL_SET,Data path control register" bitfld.long 0x4 30.--31. "FSM,IEC60958-1 Frame Synchronization Mode" "0,1,2,3" bitfld.long 0x4 29. "COMP,Compressed data search mode" "0,1" bitfld.long 0x4 28. "PRC,Process Compressed" "0,1" bitfld.long 0x4 27. "LAYB_MODE,Layout B" "0,1" newline bitfld.long 0x4 26. "LAYB_CTRL,Layout B mode control" "0,1" bitfld.long 0x4 25. "FMT_CHG_MODE,Format change detected. Reset HW for next frame" "0,1" bitfld.long 0x4 24. "FMT_CHG_CTRL,Format Change detection control." "0,1" bitfld.long 0x4 23. "MUTE_MODE,Mute mode control" "0,1" newline bitfld.long 0x4 22. "MUTE_CTRL,M0+ mute request" "0,1" bitfld.long 0x4 21. "BLKC,Block Compressed data" "0,1" bitfld.long 0x4 20. "DTS_CDS,Enable DTS CD 14 preamble search" "0,1" bitfld.long 0x4 19. "PABS,Enable preamble search" "0,1" newline bitfld.long 0x4 14.--15. "RX_DATA_FMT,Indicates format of data stored in memory." "0,1,2,3" bitfld.long 0x4 13. "DIS_B_PRE_ERR_CHK,RX_DATAPATH: Disable B preamble error check." "0,1" bitfld.long 0x4 12. "CLR_RX_FIFO,Clear Receive FIFO" "0,1" bitfld.long 0x4 11. "CSA,Channel Status Acknowledge" "0,1" newline bitfld.long 0x4 10. "UDA,User Data Acknowledge" "0,1" bitfld.long 0x4 9. "CSR,Channel Status reset" "0,1" bitfld.long 0x4 8. "UDR,User data reset" "0,1" bitfld.long 0x4 7. "EN_PARITY_CALC,Enable Parity calculation." "0,1" newline bitfld.long 0x4 6. "STORE_FMT,Receive Data store format." "0,1" bitfld.long 0x4 5. "RST_PKT_CNT_FIFO,Resets the packet count fifo." "0,1" bitfld.long 0x4 4. "EN_COMP_PARITY_CALC,RX_DATAPATH: Enable Compressed mode Parity calculation." "0,1" bitfld.long 0x4 3. "ECC_VUC_BITS_EN,RX_DATAPATH: Enable VUC bit replacement after ECC correction." "0,1" newline rbitfld.long 0x4 0. "PAPB_FIFO_STATUS,This bit is an empty fifo indicator for PaPb match." "0,1" line.long 0x8 "RX_DATAPATH_CTRL_CLR,Data path control register" eventfld.long 0x8 30.--31. "FSM,IEC60958-1 Frame Synchronization Mode" "0,1,2,3" eventfld.long 0x8 29. "COMP,Compressed data search mode" "0,1" eventfld.long 0x8 28. "PRC,Process Compressed" "0,1" eventfld.long 0x8 27. "LAYB_MODE,Layout B" "0,1" newline eventfld.long 0x8 26. "LAYB_CTRL,Layout B mode control" "0,1" eventfld.long 0x8 25. "FMT_CHG_MODE,Format change detected. Reset HW for next frame" "0,1" eventfld.long 0x8 24. "FMT_CHG_CTRL,Format Change detection control." "0,1" eventfld.long 0x8 23. "MUTE_MODE,Mute mode control" "0,1" newline eventfld.long 0x8 22. "MUTE_CTRL,M0+ mute request" "0,1" eventfld.long 0x8 21. "BLKC,Block Compressed data" "0,1" eventfld.long 0x8 20. "DTS_CDS,Enable DTS CD 14 preamble search" "0,1" eventfld.long 0x8 19. "PABS,Enable preamble search" "0,1" newline eventfld.long 0x8 14.--15. "RX_DATA_FMT,Indicates format of data stored in memory." "0,1,2,3" eventfld.long 0x8 13. "DIS_B_PRE_ERR_CHK,RX_DATAPATH: Disable B preamble error check." "0,1" eventfld.long 0x8 12. "CLR_RX_FIFO,Clear Receive FIFO" "0,1" eventfld.long 0x8 11. "CSA,Channel Status Acknowledge" "0,1" newline eventfld.long 0x8 10. "UDA,User Data Acknowledge" "0,1" eventfld.long 0x8 9. "CSR,Channel Status reset" "0,1" eventfld.long 0x8 8. "UDR,User data reset" "0,1" eventfld.long 0x8 7. "EN_PARITY_CALC,Enable Parity calculation." "0,1" newline eventfld.long 0x8 6. "STORE_FMT,Receive Data store format." "0,1" eventfld.long 0x8 5. "RST_PKT_CNT_FIFO,Resets the packet count fifo." "0,1" eventfld.long 0x8 4. "EN_COMP_PARITY_CALC,RX_DATAPATH: Enable Compressed mode Parity calculation." "0,1" eventfld.long 0x8 3. "ECC_VUC_BITS_EN,RX_DATAPATH: Enable VUC bit replacement after ECC correction." "0,1" newline eventfld.long 0x8 0. "PAPB_FIFO_STATUS,This bit is an empty fifo indicator for PaPb match." "0,1" line.long 0xC "RX_DATAPATH_CTRL_TOG,Data path control register" bitfld.long 0xC 30.--31. "FSM,IEC60958-1 Frame Synchronization Mode" "0,1,2,3" bitfld.long 0xC 29. "COMP,Compressed data search mode" "0,1" bitfld.long 0xC 28. "PRC,Process Compressed" "0,1" bitfld.long 0xC 27. "LAYB_MODE,Layout B" "0,1" newline bitfld.long 0xC 26. "LAYB_CTRL,Layout B mode control" "0,1" bitfld.long 0xC 25. "FMT_CHG_MODE,Format change detected. Reset HW for next frame" "0,1" bitfld.long 0xC 24. "FMT_CHG_CTRL,Format Change detection control." "0,1" bitfld.long 0xC 23. "MUTE_MODE,Mute mode control" "0,1" newline bitfld.long 0xC 22. "MUTE_CTRL,M0+ mute request" "0,1" bitfld.long 0xC 21. "BLKC,Block Compressed data" "0,1" bitfld.long 0xC 20. "DTS_CDS,Enable DTS CD 14 preamble search" "0,1" bitfld.long 0xC 19. "PABS,Enable preamble search" "0,1" newline bitfld.long 0xC 14.--15. "RX_DATA_FMT,Indicates format of data stored in memory." "0,1,2,3" bitfld.long 0xC 13. "DIS_B_PRE_ERR_CHK,RX_DATAPATH: Disable B preamble error check." "0,1" bitfld.long 0xC 12. "CLR_RX_FIFO,Clear Receive FIFO" "0,1" bitfld.long 0xC 11. "CSA,Channel Status Acknowledge" "0,1" newline bitfld.long 0xC 10. "UDA,User Data Acknowledge" "0,1" bitfld.long 0xC 9. "CSR,Channel Status reset" "0,1" bitfld.long 0xC 8. "UDR,User data reset" "0,1" bitfld.long 0xC 7. "EN_PARITY_CALC,Enable Parity calculation." "0,1" newline bitfld.long 0xC 6. "STORE_FMT,Receive Data store format." "0,1" bitfld.long 0xC 5. "RST_PKT_CNT_FIFO,Resets the packet count fifo." "0,1" bitfld.long 0xC 4. "EN_COMP_PARITY_CALC,RX_DATAPATH: Enable Compressed mode Parity calculation." "0,1" bitfld.long 0xC 3. "ECC_VUC_BITS_EN,RX_DATAPATH: Enable VUC bit replacement after ECC correction." "0,1" newline rbitfld.long 0xC 0. "PAPB_FIFO_STATUS,This bit is an empty fifo indicator for PaPb match." "0,1" repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x190)++0x3 line.long 0x0 "RX_CS_DATA_BITS_[$1],Channel status bits" hexmask.long 0x0 0.--31. 1. "CS_DATA,Channel Status bits" repeat.end repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x1A8)++0x3 line.long 0x0 "RX_USER_DATA_BITS_[$1],User data bits" hexmask.long 0x0 0.--31. 1. "U_DATA,User data bits" repeat.end group.long 0x1C0++0xF line.long 0x0 "RX_DPATH_CNTR_CTRL,DMAC counter control register" bitfld.long 0x0 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" bitfld.long 0x0 8. "RST_BIT_CNTR,Reset bit counter." "0,1" bitfld.long 0x0 1. "TS_INC,Timestamp Increment" "0,1" bitfld.long 0x0 0. "TS_EN,Timestamp counter enable" "0,1" line.long 0x4 "RX_DPATH_CNTR_CTRL_SET,DMAC counter control register" bitfld.long 0x4 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" bitfld.long 0x4 8. "RST_BIT_CNTR,Reset bit counter." "0,1" bitfld.long 0x4 1. "TS_INC,Timestamp Increment" "0,1" bitfld.long 0x4 0. "TS_EN,Timestamp counter enable" "0,1" line.long 0x8 "RX_DPATH_CNTR_CTRL_CLR,DMAC counter control register" eventfld.long 0x8 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" eventfld.long 0x8 8. "RST_BIT_CNTR,Reset bit counter." "0,1" eventfld.long 0x8 1. "TS_INC,Timestamp Increment" "0,1" eventfld.long 0x8 0. "TS_EN,Timestamp counter enable" "0,1" line.long 0xC "RX_DPATH_CNTR_CTRL_TOG,DMAC counter control register" bitfld.long 0xC 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" bitfld.long 0xC 8. "RST_BIT_CNTR,Reset bit counter." "0,1" bitfld.long 0xC 1. "TS_INC,Timestamp Increment" "0,1" bitfld.long 0xC 0. "TS_EN,Timestamp counter enable" "0,1" rgroup.long 0x1D0++0xF line.long 0x0 "RX_DPATH_TSCR,Receive Datapath Timestamp Counter Register" hexmask.long 0x0 0.--31. 1. "CVAL,Timestamp counter value" line.long 0x4 "RX_DPATH_BCR,Receive Datapath Bit counter register" hexmask.long 0x4 0.--31. 1. "CVAL,Bit count value" line.long 0x8 "RX_DPATH_BCTR,Receive datapath Bit count timestamp register." hexmask.long 0x8 0.--31. 1. "BCT_VAL,Bit count timestamp value" line.long 0xC "RX_DPATH_BCRR,Receive datapath Bit read timestamp register." hexmask.long 0xC 0.--31. 1. "BCT_VAL,Bit count timestamp value" group.long 0x1E0++0x27 line.long 0x0 "DMAC_PRE_MATCH_VAL,Preamble match value register" hexmask.long.word 0x0 16.--31. 1. "PA_VAL,Preamble PA value" hexmask.long.word 0x0 0.--15. 1. "PB_VAL,Preamble PB value" line.long 0x4 "DMAC_PRE_MATCH_VAL_SET,Preamble match value register" hexmask.long.word 0x4 16.--31. 1. "PA_VAL,Preamble PA value" hexmask.long.word 0x4 0.--15. 1. "PB_VAL,Preamble PB value" line.long 0x8 "DMAC_PRE_MATCH_VAL_CLR,Preamble match value register" hexmask.long.word 0x8 16.--31. 1. "PA_VAL,Preamble PA value" hexmask.long.word 0x8 0.--15. 1. "PB_VAL,Preamble PB value" line.long 0xC "DMAC_PRE_MATCH_VAL_TOG,Preamble match value register" hexmask.long.word 0xC 16.--31. 1. "PA_VAL,Preamble PA value" hexmask.long.word 0xC 0.--15. 1. "PB_VAL,Preamble PB value" line.long 0x10 "DMAC_DTS_PRE_MATCH_VAL,Preamble match value register" hexmask.long.word 0x10 16.--31. 1. "DTS_PA_VAL,Preamble PA value" hexmask.long.word 0x10 0.--15. 1. "DTS_PB_VAL,Preamble PB value" line.long 0x14 "DMAC_DTS_PRE_MATCH_VAL_SET,Preamble match value register" hexmask.long.word 0x14 16.--31. 1. "DTS_PA_VAL,Preamble PA value" hexmask.long.word 0x14 0.--15. 1. "DTS_PB_VAL,Preamble PB value" line.long 0x18 "DMAC_DTS_PRE_MATCH_VAL_CLR,Preamble match value register" hexmask.long.word 0x18 16.--31. 1. "DTS_PA_VAL,Preamble PA value" hexmask.long.word 0x18 0.--15. 1. "DTS_PB_VAL,Preamble PB value" line.long 0x1C "DMAC_DTS_PRE_MATCH_VAL_TOG,Preamble match value register" hexmask.long.word 0x1C 16.--31. 1. "DTS_PA_VAL,Preamble PA value" hexmask.long.word 0x1C 0.--15. 1. "DTS_PB_VAL,Preamble PB value" line.long 0x20 "RX_DPATH_PRE_ERR,Error count for IEC60958-1 Block Synchronization." bitfld.long 0x20 31. "CLEAR,Clear bit for error counter." "0,1" hexmask.long.word 0x20 0.--15. 1. "PRE_ERRS,Preamble Error counter" line.long 0x24 "RX_DPATH_PARITY_ERR,Parity Error count for IEC60958-1 Blocks." bitfld.long 0x24 31. "CLEAR,Clear bit for error counter." "0,1" hexmask.long.word 0x24 0.--15. 1. "PRE_ERRS,Preamble Error counter" rgroup.long 0x210++0xB line.long 0x0 "RX_DPATH_PKT_CNT,Receive Data packet count." hexmask.long 0x0 0.--30. 1. "VAL,Data packet counter" line.long 0x4 "RX_DPATH_ONE_BIT_ERR_CNT,Receive Data packet Corrected error count." hexmask.long.word 0x4 0.--15. 1. "VAL,This status provides the number of single bit BCH errors corrected." line.long 0x8 "DMAC_PRE_MATCH_OFFSET,Preamble match offset value register" hexmask.long 0x8 0.--31. 1. "PA_OFFSET,Sample count value for PA offset match" group.long 0x220++0xF line.long 0x0 "TX_DATAPATH_CTRL,Transmit Data path control register" bitfld.long 0x0 14. "STRT_DATA_TX,Once Comma pattern is successively received and heartbeat is detected start TX of DMAC data." "0,1" bitfld.long 0x0 12.--13. "TX_FORMAT,Transmit data format" "0,1,2,3" bitfld.long 0x0 11. "FRM_FMT,Frame format of input data" "0,1" bitfld.long 0x0 10. "TX_CLK_RATE,This bit controls the TX clock rate." "0,1" newline bitfld.long 0x0 7. "EN_PREAMBLE,Enable preamble insertion" "0,1" bitfld.long 0x0 6. "EN_PARITY,Enable parity insertion" "0,1" bitfld.long 0x0 5. "FRM_VLD,Valid bit value" "0,1" bitfld.long 0x0 4. "VLD_MOD,Enable Valid bit insertion" "0,1" newline bitfld.long 0x0 3. "UD_MOD,Enable User Data insertion" "0,1" bitfld.long 0x0 2. "CS_MOD,Enable Channel Status insertion" "0,1" bitfld.long 0x0 1. "UD_ACK,User Data ACK" "0,1" bitfld.long 0x0 0. "CS_ACK,Channel Status ACK" "0,1" line.long 0x4 "TX_DATAPATH_CTRL_SET,Transmit Data path control register" bitfld.long 0x4 14. "STRT_DATA_TX,Once Comma pattern is successively received and heartbeat is detected start TX of DMAC data." "0,1" bitfld.long 0x4 12.--13. "TX_FORMAT,Transmit data format" "0,1,2,3" bitfld.long 0x4 11. "FRM_FMT,Frame format of input data" "0,1" bitfld.long 0x4 10. "TX_CLK_RATE,This bit controls the TX clock rate." "0,1" newline bitfld.long 0x4 7. "EN_PREAMBLE,Enable preamble insertion" "0,1" bitfld.long 0x4 6. "EN_PARITY,Enable parity insertion" "0,1" bitfld.long 0x4 5. "FRM_VLD,Valid bit value" "0,1" bitfld.long 0x4 4. "VLD_MOD,Enable Valid bit insertion" "0,1" newline bitfld.long 0x4 3. "UD_MOD,Enable User Data insertion" "0,1" bitfld.long 0x4 2. "CS_MOD,Enable Channel Status insertion" "0,1" bitfld.long 0x4 1. "UD_ACK,User Data ACK" "0,1" bitfld.long 0x4 0. "CS_ACK,Channel Status ACK" "0,1" line.long 0x8 "TX_DATAPATH_CTRL_CLR,Transmit Data path control register" eventfld.long 0x8 14. "STRT_DATA_TX,Once Comma pattern is successively received and heartbeat is detected start TX of DMAC data." "0,1" eventfld.long 0x8 12.--13. "TX_FORMAT,Transmit data format" "0,1,2,3" eventfld.long 0x8 11. "FRM_FMT,Frame format of input data" "0,1" eventfld.long 0x8 10. "TX_CLK_RATE,This bit controls the TX clock rate." "0,1" newline eventfld.long 0x8 7. "EN_PREAMBLE,Enable preamble insertion" "0,1" eventfld.long 0x8 6. "EN_PARITY,Enable parity insertion" "0,1" eventfld.long 0x8 5. "FRM_VLD,Valid bit value" "0,1" eventfld.long 0x8 4. "VLD_MOD,Enable Valid bit insertion" "0,1" newline eventfld.long 0x8 3. "UD_MOD,Enable User Data insertion" "0,1" eventfld.long 0x8 2. "CS_MOD,Enable Channel Status insertion" "0,1" eventfld.long 0x8 1. "UD_ACK,User Data ACK" "0,1" eventfld.long 0x8 0. "CS_ACK,Channel Status ACK" "0,1" line.long 0xC "TX_DATAPATH_CTRL_TOG,Transmit Data path control register" bitfld.long 0xC 14. "STRT_DATA_TX,Once Comma pattern is successively received and heartbeat is detected start TX of DMAC data." "0,1" bitfld.long 0xC 12.--13. "TX_FORMAT,Transmit data format" "0,1,2,3" bitfld.long 0xC 11. "FRM_FMT,Frame format of input data" "0,1" bitfld.long 0xC 10. "TX_CLK_RATE,This bit controls the TX clock rate." "0,1" newline bitfld.long 0xC 7. "EN_PREAMBLE,Enable preamble insertion" "0,1" bitfld.long 0xC 6. "EN_PARITY,Enable parity insertion" "0,1" bitfld.long 0xC 5. "FRM_VLD,Valid bit value" "0,1" bitfld.long 0xC 4. "VLD_MOD,Enable Valid bit insertion" "0,1" newline bitfld.long 0xC 3. "UD_MOD,Enable User Data insertion" "0,1" bitfld.long 0xC 2. "CS_MOD,Enable Channel Status insertion" "0,1" bitfld.long 0xC 1. "UD_ACK,User Data ACK" "0,1" bitfld.long 0xC 0. "CS_ACK,Channel Status ACK" "0,1" repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x230)++0x3 line.long 0x0 "TX_CS_DATA_BITS_[$1],Channel status bits" hexmask.long 0x0 0.--31. 1. "CS_DATA,Channel Status bits / block" repeat.end repeat 6. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x248)++0x3 line.long 0x0 "TX_USER_DATA_BITS_[$1],User data bits" hexmask.long 0x0 0.--31. 1. "U_DATA,User data bits/block" repeat.end group.long 0x260++0xF line.long 0x0 "TX_DPATH_CNTR_CTRL,DMAC counter control register" bitfld.long 0x0 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" bitfld.long 0x0 8. "RST_BIT_CNTR,Reset bit counter." "0,1" bitfld.long 0x0 1. "TS_INC,Timestamp Increment" "0,1" bitfld.long 0x0 0. "TS_EN,Timestamp counter enable" "0,1" line.long 0x4 "TX_DPATH_CNTR_CTRL_SET,DMAC counter control register" bitfld.long 0x4 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" bitfld.long 0x4 8. "RST_BIT_CNTR,Reset bit counter." "0,1" bitfld.long 0x4 1. "TS_INC,Timestamp Increment" "0,1" bitfld.long 0x4 0. "TS_EN,Timestamp counter enable" "0,1" line.long 0x8 "TX_DPATH_CNTR_CTRL_CLR,DMAC counter control register" eventfld.long 0x8 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" eventfld.long 0x8 8. "RST_BIT_CNTR,Reset bit counter." "0,1" eventfld.long 0x8 1. "TS_INC,Timestamp Increment" "0,1" eventfld.long 0x8 0. "TS_EN,Timestamp counter enable" "0,1" line.long 0xC "TX_DPATH_CNTR_CTRL_TOG,DMAC counter control register" bitfld.long 0xC 9. "RST_TS_CNTR,Reset timestamp counter." "0,1" bitfld.long 0xC 8. "RST_BIT_CNTR,Reset bit counter." "0,1" bitfld.long 0xC 1. "TS_INC,Timestamp Increment" "0,1" bitfld.long 0xC 0. "TS_EN,Timestamp counter enable" "0,1" rgroup.long 0x270++0xF line.long 0x0 "TX_DPATH_TSCR,Transmit Datapath Timestamp Counter Register" hexmask.long 0x0 0.--31. 1. "CVAL,Timestamp counter value" line.long 0x4 "TX_DPATH_BCR,Transmit Datapath Bit counter register" hexmask.long 0x4 0.--31. 1. "CVAL,Bit count value" line.long 0x8 "TX_DPATH_BCTR,Transmit datapath Bit count timestamp register." hexmask.long 0x8 0.--31. 1. "BCT_VAL,Bit count timestamp value" line.long 0xC "TX_DPATH_BCRR,Transmit datapath Bit read timestamp register." hexmask.long 0xC 0.--31. 1. "BCT_VAL,Bit count timestamp value" group.long 0x2A0++0xF line.long 0x0 "HPD_DBNC_CTRL,HPD Debounce Control Register" hexmask.long 0x0 0.--31. 1. "VAL,HDP pin debounce interval" line.long 0x4 "HPD_DBNC_CTRL_SET,HPD Debounce Control Register" hexmask.long 0x4 0.--31. 1. "VAL,HDP pin debounce interval" line.long 0x8 "HPD_DBNC_CTRL_CLR,HPD Debounce Control Register" hexmask.long 0x8 0.--31. 1. "VAL,HDP pin debounce interval" line.long 0xC "HPD_DBNC_CTRL_TOG,HPD Debounce Control Register" hexmask.long 0xC 0.--31. 1. "VAL,HDP pin debounce interval" tree.end tree "WAKEUP_CAN_FD" tree "CAN2" base ad:0x425B0000 group.long 0x0++0xB line.long 0x0 "MCR,Module Configuration Register" bitfld.long 0x0 31. "MDIS,Module Disable" "0: Enable the FlexCAN module.,1: Disable the FlexCAN module." bitfld.long 0x0 30. "FRZ,Freeze Enable" "0: Not enabled to enter Freeze mode.,1: Enabled to enter Freeze mode." newline bitfld.long 0x0 29. "RFEN,Legacy Rx FIFO Enable" "0: Legacy Rx FIFO not enabled.,1: Legacy Rx FIFO enabled." bitfld.long 0x0 28. "HALT,Halt FlexCAN" "0: No Freeze mode request.,1: Enters Freeze mode if the FRZ bit is asserted." newline rbitfld.long 0x0 27. "NOTRDY,FlexCAN Not Ready" "0: FlexCAN module is either in Normal mode..,1: FlexCAN module is either in Disable mode Doze.." bitfld.long 0x0 26. "WAKMSK,Wake Up Interrupt Mask" "0: Wake Up interrupt is disabled.,1: Wake Up interrupt is enabled." newline bitfld.long 0x0 25. "SOFTRST,Soft Reset" "0: No reset request.,1: Resets the registers affected by soft reset." rbitfld.long 0x0 24. "FRZACK,Freeze Mode Acknowledge" "0: FlexCAN not in Freeze mode prescaler running.,1: FlexCAN in Freeze mode prescaler stopped." newline bitfld.long 0x0 23. "SUPV,Supervisor Mode" "0: FlexCAN is in User mode. Affected registers..,1: FlexCAN is in Supervisor mode. Affected.." bitfld.long 0x0 22. "SLFWAK,Self Wake Up" "0: FlexCAN Self Wake Up feature is disabled.,1: FlexCAN Self Wake Up feature is enabled." newline bitfld.long 0x0 21. "WRNEN,Warning Interrupt Enable" "0: TWRNINT and RWRNINT bits are zero independent of..,1: TWRNINT and RWRNINT bits are set when the.." rbitfld.long 0x0 20. "LPMACK,Low-Power Mode Acknowledge" "0: FlexCAN is not in a low-power mode.,1: FlexCAN is in a low-power mode." newline bitfld.long 0x0 19. "WAKSRC,Wake Up Source" "0: FlexCAN uses the unfiltered Rx input to detect..,1: FlexCAN uses the filtered Rx input to detect.." bitfld.long 0x0 18. "DOZE,Doze Mode Enable" "0: FlexCAN is not enabled to enter low-power mode..,1: FlexCAN is enabled to enter low-power mode when.." newline bitfld.long 0x0 17. "SRXDIS,Self Reception Disable" "0: Self-reception enabled.,1: Self-reception disabled." bitfld.long 0x0 16. "IRMQ,Individual Rx Masking And Queue Enable" "0: Individual Rx masking and queue feature are..,1: Individual Rx masking and queue feature are.." newline bitfld.long 0x0 15. "DMA,DMA Enable" "0: DMA feature for Legacy RX FIFO or Enhanced Rx..,1: DMA feature for Legacy RX FIFO or Enhanced Rx.." bitfld.long 0x0 13. "LPRIOEN,Local Priority Enable" "0: Local Priority disabled.,1: Local Priority enabled." newline bitfld.long 0x0 12. "AEN,Abort Enable" "0: Abort disabled.,1: Abort enabled." bitfld.long 0x0 11. "FDEN,CAN FD operation enable" "0: CAN FD is disabled. FlexCAN is able to receive..,1: CAN FD is enabled. FlexCAN is able to receive.." newline bitfld.long 0x0 8.--9. "IDAM,ID Acceptance Mode" "0: Format A: One full ID (standard and extended)..,1: Format B: Two full standard IDs or two partial..,2: Format C: Four partial 8-bit standard IDs per ID..,3: Format D: All frames rejected." hexmask.long.byte 0x0 0.--6. 1. "MAXMB,Number Of The Last Message Buffer" line.long 0x4 "CTRL1,Control 1 Register" hexmask.long.byte 0x4 24.--31. 1. "PRESDIV,Prescaler Division Factor" bitfld.long 0x4 22.--23. "RJW,Resync Jump Width" "0,1,2,3" newline bitfld.long 0x4 19.--21. "PSEG1,Phase Segment 1" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PSEG2,Phase Segment 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 15. "BOFFMSK,Bus Off Interrupt Mask" "0: Bus Off interrupt disabled.,1: Bus Off interrupt enabled." bitfld.long 0x4 14. "ERRMSK,Error Interrupt Mask" "0: Error interrupt disabled.,1: Error interrupt enabled." newline bitfld.long 0x4 13. "CLKSRC,CAN Engine Clock Source" "0: The CAN engine clock source is the oscillator..,1: The CAN engine clock source is the peripheral.." bitfld.long 0x4 12. "LPB,Loop Back Mode" "0: Loop Back disabled.,1: Loop Back enabled." newline bitfld.long 0x4 11. "TWRNMSK,Tx Warning Interrupt Mask" "0: Tx Warning interrupt disabled.,1: Tx Warning interrupt enabled." bitfld.long 0x4 10. "RWRNMSK,Rx Warning Interrupt Mask" "0: Rx Warning interrupt disabled.,1: Rx Warning interrupt enabled." newline bitfld.long 0x4 7. "SMP,CAN Bit Sampling" "0: Just one sample is used to determine the bit..,1: Three samples are used to determine the value of.." bitfld.long 0x4 6. "BOFFREC,Bus Off Recovery" "0: Automatic recovering from Bus Off state enabled.,1: Automatic recovering from Bus Off state disabled." newline bitfld.long 0x4 5. "TSYN,Timer Sync" "0: Timer sync feature disabled,1: Timer sync feature enabled" bitfld.long 0x4 4. "LBUF,Lowest Buffer Transmitted First" "0: Buffer with highest priority is transmitted first.,1: Lowest number buffer is transmitted first." newline bitfld.long 0x4 3. "LOM,Listen-Only Mode" "0: Listen-Only mode is deactivated.,1: FlexCAN module operates in Listen-Only mode." bitfld.long 0x4 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7" line.long 0x8 "TIMER,Free Running Timer" hexmask.long.word 0x8 0.--15. 1. "TIMER,Timer Value" group.long 0x10++0x27 line.long 0x0 "RXMGMASK,Rx Mailboxes Global Mask Register" hexmask.long 0x0 0.--31. 1. "MG,Rx Mailboxes Global Mask Bits" line.long 0x4 "RX14MASK,Rx 14 Mask Register" hexmask.long 0x4 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits" line.long 0x8 "RX15MASK,Rx 15 Mask Register" hexmask.long 0x8 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits" line.long 0xC "ECR,Error Counter" hexmask.long.byte 0xC 24.--31. 1. "RXERRCNT_FAST,Receive Error Counter for fast bits" hexmask.long.byte 0xC 16.--23. 1. "TXERRCNT_FAST,Transmit Error Counter for fast bits" newline hexmask.long.byte 0xC 8.--15. 1. "RXERRCNT,Receive Error Counter" hexmask.long.byte 0xC 0.--7. 1. "TXERRCNT,Transmit Error Counter" line.long 0x10 "ESR1,Error and Status 1 Register" rbitfld.long 0x10 31. "BIT1ERR_FAST,Bit1 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as recessive is received.." rbitfld.long 0x10 30. "BIT0ERR_FAST,Bit0 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." newline rbitfld.long 0x10 28. "CRCERR_FAST,Cyclic Redundancy Check Error in the CRC field of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 27. "FRMERR_FAST,Form Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A form error occurred since last read of this.." newline rbitfld.long 0x10 26. "STFERR_FAST,Stuffing Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A stuffing error occurred since last read of.." eventfld.long 0x10 21. "ERROVR,Error Overrun" "0: Overrun has not occurred.,1: Overrun has occurred." newline eventfld.long 0x10 20. "ERRINT_FAST,Error interrupt for errors detected in Data Phase of CAN FD frames with BRS bit set" "0: No such occurrence.,1: Indicates setting of any error bit detected in.." eventfld.long 0x10 19. "BOFFDONEINT,Bus Off Done Interrupt" "0: No such occurrence.,1: FlexCAN module has completed Bus Off process." newline rbitfld.long 0x10 18. "SYNCH,CAN Synchronization Status" "0: FlexCAN is not synchronized to the CAN bus.,1: FlexCAN is synchronized to the CAN bus." eventfld.long 0x10 17. "TWRNINT,Tx Warning Interrupt Flag" "0: No such occurrence.,1: The Tx error counter transitioned from less than.." newline eventfld.long 0x10 16. "RWRNINT,Rx Warning Interrupt Flag" "0: No such occurrence.,1: The Rx error counter transitioned from less than.." rbitfld.long 0x10 15. "BIT1ERR,Bit1 Error" "0: No such occurrence.,1: At least one bit sent as recessive is received.." newline rbitfld.long 0x10 14. "BIT0ERR,Bit0 Error" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." rbitfld.long 0x10 13. "ACKERR,Acknowledge Error" "0: No such occurrence.,1: An ACK error occurred since last read of this.." newline rbitfld.long 0x10 12. "CRCERR,Cyclic Redundancy Check Error" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 11. "FRMERR,Form Error" "0: No such occurrence.,1: A Form Error occurred since last read of this.." newline rbitfld.long 0x10 10. "STFERR,Stuffing Error" "0: No such occurrence.,1: A stuffing error occurred since last read of.." rbitfld.long 0x10 9. "TXWRN,TX Error Warning" "0: No such occurrence.,1: TXERRCNT is greater than or equal to 96." newline rbitfld.long 0x10 8. "RXWRN,Rx Error Warning" "0: No such occurrence.,1: RXERRCNT is greater than or equal to 96." rbitfld.long 0x10 7. "IDLE,IDLE" "0: No such occurrence.,1: CAN bus is now IDLE." newline rbitfld.long 0x10 6. "TX,FlexCAN In Transmission" "0: FlexCAN is not transmitting a message.,1: FlexCAN is transmitting a message." rbitfld.long 0x10 4.--5. "FLTCONF,Fault Confinement State" "0: Bus Off,1: Error Passive,2: Bus Off,3: Bus Off" newline rbitfld.long 0x10 3. "RX,FlexCAN In Reception" "0: FlexCAN is not receiving a message.,1: FlexCAN is receiving a message." eventfld.long 0x10 2. "BOFFINT,Bus Off Interrupt" "0: No such occurrence.,1: FlexCAN module entered Bus Off state." newline eventfld.long 0x10 1. "ERRINT,Error Interrupt" "0: No such occurrence.,1: Indicates setting of any error bit in the Error.." eventfld.long 0x10 0. "WAKINT,Wake-Up Interrupt" "0: No such occurrence.,1: Indicates a recessive to dominant transition was.." line.long 0x14 "IMASK2,Interrupt Masks 2 Register" hexmask.long 0x14 0.--31. 1. "BUF63TO32M,Buffer MBi Mask" line.long 0x18 "IMASK1,Interrupt Masks 1 Register" hexmask.long 0x18 0.--31. 1. "BUF31TO0M,Buffer MBi Mask" line.long 0x1C "IFLAG2,Interrupt Flags 2 Register" hexmask.long 0x1C 0.--31. 1. "BUF63TO32I,Buffer MBi Interrupt" line.long 0x20 "IFLAG1,Interrupt Flags 1 Register" hexmask.long.tbyte 0x20 8.--31. 1. "BUF31TO8I,Buffer MBi Interrupt" eventfld.long 0x20 7. "BUF7I,Buffer MB7 Interrupt Or Legacy Rx FIFO Overflow" "0: No occurrence of MB7 completing..,1: MB7 completed transmission/reception when.." newline eventfld.long 0x20 6. "BUF6I,Buffer MB6 Interrupt Or Legacy Rx FIFO Warning" "0: No occurrence of MB6 completing..,1: MB6 completed transmission/reception when.." eventfld.long 0x20 5. "BUF5I,Buffer MB5 Interrupt Or Frames available in Legacy Rx FIFO" "0: No occurrence of MB5 completing..,1: MB5 completed transmission/reception when.." newline hexmask.long.byte 0x20 1.--4. 1. "BUF4TO1I,Buffer MBi Interrupt Or Reserved" eventfld.long 0x20 0. "BUF0I,Buffer MB0 Interrupt Or Clear Legacy FIFO bit" "0: The corresponding buffer has no occurrence of..,1: The corresponding buffer has successfully.." line.long 0x24 "CTRL2,Control 2 Register" bitfld.long 0x24 31. "ERRMSK_FAST,Error Interrupt Mask for errors detected in the data phase of fast CAN FD frames" "0: ERRINT_FAST error interrupt disabled.,1: ERRINT_FAST error interrupt enabled." bitfld.long 0x24 30. "BOFFDONEMSK,Bus Off Done Interrupt Mask" "0: Bus off done interrupt disabled.,1: Bus off done interrupt enabled." newline bitfld.long 0x24 29. "ECRWRE,Error-correction Configuration Register Write Enable" "0: Disable update.,1: Enable update." bitfld.long 0x24 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0: Maintain the write access restrictions.,1: Enable unrestricted write access to FlexCAN.." newline hexmask.long.byte 0x24 24.--27. 1. "RFFN,Number Of Legacy Rx FIFO Filters" hexmask.long.byte 0x24 19.--23. 1. "TASD,Tx Arbitration Start Delay" newline bitfld.long 0x24 18. "MRP,Mailboxes Reception Priority" "0: Matching starts from Legacy Rx FIFO or Enhanced..,1: Matching starts from mailboxes and continues on.." bitfld.long 0x24 17. "RRS,Remote Request Storing" "0: Remote response frame is generated.,1: Remote request frame is stored." newline bitfld.long 0x24 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0: Rx mailbox filter's IDE bit is always compared..,1: Enables the comparison of both Rx mailbox.." bitfld.long 0x24 15. "TIMER_SRC,Timer Source" "0: The free running timer is clocked by the CAN bit..,1: The free running timer is clocked by an external.." newline bitfld.long 0x24 14. "PREXCEN,Protocol Exception Enable" "0: Protocol exception is disabled.,1: Protocol exception is enabled." bitfld.long 0x24 13. "BTE,Bit Timing Expansion enable" "0: CAN Bit timing expansion is disabled.,1: CAN bit timing expansion is enabled." newline bitfld.long 0x24 12. "ISOCANFDEN,ISO CAN FD Enable" "0: FlexCAN operates using the non-ISO CAN FD..,1: FlexCAN operates using the ISO CAN FD protocol.." bitfld.long 0x24 11. "EDFLTDIS,Edge Filter Disable" "0: Edge filter is enabled,1: Edge filter is disabled" newline bitfld.long 0x24 8.--9. "MBTSBASE,Message Buffer Time Stamp Base" "0: Message buffer time stamp base is TIMER,1: Message buffer time stamp base is lower 16 bits..,2: Message buffer time stamp base is upper 16 bits..,?" bitfld.long 0x24 6.--7. "TSTAMPCAP,Time Stamp Capture Point" "0: The high resolution time stamp capture is disabled,1: The high resolution time stamp is captured in..,2: The high resolution time stamp is captured in..,3: The high resolution time stamp is captured in.." rgroup.long 0x38++0x3 line.long 0x0 "ESR2,Error and Status 2 Register" hexmask.long.byte 0x0 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox" bitfld.long 0x0 14. "VPS,Valid Priority Status" "0: Contents of IMB and LPTM are invalid.,1: Contents of IMB and LPTM are valid." newline bitfld.long 0x0 13. "IMB,Inactive Mailbox" "0: If ESR2[VPS] is asserted the ESR2[LPTM] is not..,1: If ESR2[VPS] is asserted there is at least one.." rgroup.long 0x44++0x3 line.long 0x0 "CRCR,CRC Register" hexmask.long.byte 0x0 16.--22. 1. "MBCRC,CRC Mailbox" hexmask.long.word 0x0 0.--14. 1. "TXCRC,Transmitted CRC value" group.long 0x48++0x3 line.long 0x0 "RXFGMASK,Legacy Rx FIFO Global Mask Register" hexmask.long 0x0 0.--31. 1. "FGM,Legacy Rx FIFO Global Mask Bits" rgroup.long 0x4C++0x3 line.long 0x0 "RXFIR,Legacy Rx FIFO Information Register" hexmask.long.word 0x0 0.--8. 1. "IDHIT,Identifier Acceptance Filter Hit Indicator" group.long 0x50++0x3 line.long 0x0 "CBT,CAN Bit Timing Register" bitfld.long 0x0 31. "BTF,Bit Timing Format Enable" "0: Extended bit time definitions disabled.,1: Extended bit time definitions enabled." hexmask.long.word 0x0 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor" newline hexmask.long.byte 0x0 16.--20. 1. "ERJW,Extended Resync Jump Width" hexmask.long.byte 0x0 10.--15. 1. "EPROPSEG,Extended Propagation Segment" newline hexmask.long.byte 0x0 5.--9. 1. "EPSEG1,Extended Phase Segment 1" hexmask.long.byte 0x0 0.--4. 1. "EPSEG2,Extended Phase Segment 2" group.long 0x6C++0x3 line.long 0x0 "IMASK3,Interrupt Masks 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64M,Buffer MBi Mask" group.long 0x74++0x3 line.long 0x0 "IFLAG3,Interrupt Flags 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64,Buffer MBi Interrupt" group.long 0x80++0x3 line.long 0x0 "CS0,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_16B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_32B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_64B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x7 line.long 0x0 "MB0_8B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID0,Message Buffer 0 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_16B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_32B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_64B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x7 line.long 0x0 "MB0_8B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_16B_WORD0,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_32B_WORD0,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_64B_WORD0,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_8B_WORD0,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x7 line.long 0x0 "WORD00,Message Buffer 0 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_16B_WORD1,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_32B_WORD1,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_64B_WORD1,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_8B_WORD1,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x7 line.long 0x0 "WORD10,Message Buffer 0 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS1,Message Buffer 1 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x90++0x3 line.long 0x0 "MB0_16B_WORD2,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_32B_WORD2,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_64B_WORD2,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x7 line.long 0x0 "MB1_8B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID1,Message Buffer 1 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x94++0x3 line.long 0x0 "MB0_16B_WORD3,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_32B_WORD3,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_64B_WORD3,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x7 line.long 0x0 "MB1_8B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_32B_WORD4,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB0_64B_WORD4,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB1_16B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x98++0x3 line.long 0x0 "MB1_8B_WORD0,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x98++0x7 line.long 0x0 "WORD01,Message Buffer 1 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_32B_WORD5,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB0_64B_WORD5,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB1_16B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x9C++0x3 line.long 0x0 "MB1_8B_WORD1,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x7 line.long 0x0 "WORD11,Message Buffer 1 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS2,Message Buffer 2 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA0++0x3 line.long 0x0 "MB0_32B_WORD6,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB0_64B_WORD6,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB1_16B_WORD0,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x7 line.long 0x0 "MB2_8B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID2,Message Buffer 2 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xA4++0x3 line.long 0x0 "MB0_32B_WORD7,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB0_64B_WORD7,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB1_16B_WORD1,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x7 line.long 0x0 "MB2_8B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD8,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_16B_WORD2,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_32B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA8++0x3 line.long 0x0 "MB2_8B_WORD0,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x7 line.long 0x0 "WORD02,Message Buffer 2 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD9,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_16B_WORD3,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_32B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xAC++0x3 line.long 0x0 "MB2_8B_WORD1,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x7 line.long 0x0 "WORD12,Message Buffer 2 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS3,Message Buffer 3 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x3 line.long 0x0 "MB0_64B_WORD10,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB1_32B_WORD0,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB2_16B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x7 line.long 0x0 "MB3_8B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID3,Message Buffer 3 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x3 line.long 0x0 "MB0_64B_WORD11,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB1_32B_WORD1,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB2_16B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x7 line.long 0x0 "MB3_8B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD12,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB1_32B_WORD2,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB2_16B_WORD0,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB3_8B_WORD0,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x7 line.long 0x0 "WORD03,Message Buffer 3 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD13,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB1_32B_WORD3,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB2_16B_WORD1,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB3_8B_WORD1,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x7 line.long 0x0 "WORD13,Message Buffer 3 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS4,Message Buffer 4 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC0++0x3 line.long 0x0 "MB0_64B_WORD14,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB1_32B_WORD4,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB2_16B_WORD2,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x7 line.long 0x0 "MB4_8B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID4,Message Buffer 4 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xC4++0x3 line.long 0x0 "MB0_64B_WORD15,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB1_32B_WORD5,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB2_16B_WORD3,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x7 line.long 0x0 "MB4_8B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_32B_WORD6,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x3 line.long 0x0 "MB1_64B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB3_16B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB4_8B_WORD0,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x7 line.long 0x0 "WORD04,Message Buffer 4 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_32B_WORD7,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x3 line.long 0x0 "MB1_64B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB3_16B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB4_8B_WORD1,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x7 line.long 0x0 "WORD14,Message Buffer 4 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS5,Message Buffer 5 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB1_64B_WORD0,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x3 line.long 0x0 "MB2_32B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB3_16B_WORD0,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x7 line.long 0x0 "MB5_8B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID5,Message Buffer 5 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB1_64B_WORD1,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x3 line.long 0x0 "MB2_32B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB3_16B_WORD1,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x7 line.long 0x0 "MB5_8B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD2,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB2_32B_WORD0,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB3_16B_WORD2,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB5_8B_WORD0,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x7 line.long 0x0 "WORD05,Message Buffer 5 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD3,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB2_32B_WORD1,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB3_16B_WORD3,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB5_8B_WORD1,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x7 line.long 0x0 "WORD15,Message Buffer 5 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS6,Message Buffer 6 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x3 line.long 0x0 "MB1_64B_WORD4,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB2_32B_WORD2,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB4_16B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x7 line.long 0x0 "MB6_8B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID6,Message Buffer 6 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x3 line.long 0x0 "MB1_64B_WORD5,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB2_32B_WORD3,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB4_16B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x7 line.long 0x0 "MB6_8B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD6,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB2_32B_WORD4,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB4_16B_WORD0,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB6_8B_WORD0,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x7 line.long 0x0 "WORD06,Message Buffer 6 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD7,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB2_32B_WORD5,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB4_16B_WORD1,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB6_8B_WORD1,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x7 line.long 0x0 "WORD16,Message Buffer 6 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS7,Message Buffer 7 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF0++0x3 line.long 0x0 "MB1_64B_WORD8,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB2_32B_WORD6,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB4_16B_WORD2,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x7 line.long 0x0 "MB7_8B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID7,Message Buffer 7 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xF4++0x3 line.long 0x0 "MB1_64B_WORD9,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB2_32B_WORD7,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB4_16B_WORD3,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x7 line.long 0x0 "MB7_8B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD10,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x3 line.long 0x0 "MB3_32B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB5_16B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB7_8B_WORD0,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x7 line.long 0x0 "WORD07,Message Buffer 7 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD11,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x3 line.long 0x0 "MB3_32B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB5_16B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB7_8B_WORD1,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x7 line.long 0x0 "WORD17,Message Buffer 7 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS8,Message Buffer 8 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x100++0x3 line.long 0x0 "MB1_64B_WORD12,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB3_32B_WORD0,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB5_16B_WORD0,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x7 line.long 0x0 "MB8_8B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID8,Message Buffer 8 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x104++0x3 line.long 0x0 "MB1_64B_WORD13,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB3_32B_WORD1,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB5_16B_WORD1,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x7 line.long 0x0 "MB8_8B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD14,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB3_32B_WORD2,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB5_16B_WORD2,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB8_8B_WORD0,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x108++0x7 line.long 0x0 "WORD08,Message Buffer 8 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD15,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB3_32B_WORD3,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB5_16B_WORD3,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB8_8B_WORD1,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x7 line.long 0x0 "WORD18,Message Buffer 8 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS9,Message Buffer 9 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB2_64B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB3_32B_WORD4,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x110++0x3 line.long 0x0 "MB6_16B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x7 line.long 0x0 "MB9_8B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID9,Message Buffer 9 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB2_64B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB3_32B_WORD5,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x114++0x3 line.long 0x0 "MB6_16B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x7 line.long 0x0 "MB9_8B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB2_64B_WORD0,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB3_32B_WORD6,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB6_16B_WORD0,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB9_8B_WORD0,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x7 line.long 0x0 "WORD09,Message Buffer 9 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB2_64B_WORD1,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB3_32B_WORD7,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB6_16B_WORD1,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB9_8B_WORD1,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x7 line.long 0x0 "WORD19,Message Buffer 9 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS10,Message Buffer 10 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB10_8B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB2_64B_WORD2,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x120++0x3 line.long 0x0 "MB4_32B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x7 line.long 0x0 "MB6_16B_WORD2,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID10,Message Buffer 10 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB10_8B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB2_64B_WORD3,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x124++0x3 line.long 0x0 "MB4_32B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x7 line.long 0x0 "MB6_16B_WORD3,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD0,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB2_64B_WORD4,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB4_32B_WORD0,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB7_16B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x128++0x7 line.long 0x0 "WORD010,Message Buffer 10 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD1,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB2_64B_WORD5,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB4_32B_WORD1,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB7_16B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x12C++0x7 line.long 0x0 "WORD110,Message Buffer 10 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS11,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB11_8B_CS,Message Buffer 11 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB2_64B_WORD6,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x130++0x3 line.long 0x0 "MB4_32B_WORD2,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x130++0x7 line.long 0x0 "MB7_16B_WORD0,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID11,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB11_8B_ID,Message Buffer 11 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB2_64B_WORD7,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x134++0x3 line.long 0x0 "MB4_32B_WORD3,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x134++0x7 line.long 0x0 "MB7_16B_WORD1,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD0,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB2_64B_WORD8,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB4_32B_WORD4,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB7_16B_WORD2,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x138++0x7 line.long 0x0 "WORD011,Message Buffer 11 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD1,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB2_64B_WORD9,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB4_32B_WORD5,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB7_16B_WORD3,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x7 line.long 0x0 "WORD111,Message Buffer 11 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS12,Message Buffer 12 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB12_8B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB2_64B_WORD10,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x140++0x3 line.long 0x0 "MB4_32B_WORD6,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x140++0x7 line.long 0x0 "MB8_16B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID12,Message Buffer 12 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB12_8B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB2_64B_WORD11,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x144++0x3 line.long 0x0 "MB4_32B_WORD7,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x144++0x7 line.long 0x0 "MB8_16B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_8B_WORD0,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB2_64B_WORD12,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB5_32B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x148++0x3 line.long 0x0 "MB8_16B_WORD0,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x7 line.long 0x0 "WORD012,Message Buffer 12 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_8B_WORD1,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB2_64B_WORD13,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB5_32B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x14C++0x3 line.long 0x0 "MB8_16B_WORD1,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x7 line.long 0x0 "WORD112,Message Buffer 12 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS13,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB13_8B_CS,Message Buffer 13 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB2_64B_WORD14,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x150++0x3 line.long 0x0 "MB5_32B_WORD0,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x150++0x7 line.long 0x0 "MB8_16B_WORD2,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID13,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB13_8B_ID,Message Buffer 13 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB2_64B_WORD15,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x154++0x3 line.long 0x0 "MB5_32B_WORD1,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x154++0x7 line.long 0x0 "MB8_16B_WORD3,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD0,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB3_64B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x3 line.long 0x0 "MB5_32B_WORD2,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB9_16B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x7 line.long 0x0 "WORD013,Message Buffer 13 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD1,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB3_64B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x3 line.long 0x0 "MB5_32B_WORD3,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB9_16B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x7 line.long 0x0 "WORD113,Message Buffer 13 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS14,Message Buffer 14 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB14_8B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB3_64B_WORD0,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x160++0x3 line.long 0x0 "MB5_32B_WORD4,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x160++0x7 line.long 0x0 "MB9_16B_WORD0,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID14,Message Buffer 14 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB14_8B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB3_64B_WORD1,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x164++0x3 line.long 0x0 "MB5_32B_WORD5,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x164++0x7 line.long 0x0 "MB9_16B_WORD1,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD0,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB3_64B_WORD2,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB5_32B_WORD6,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB9_16B_WORD2,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x7 line.long 0x0 "WORD014,Message Buffer 14 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD1,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB3_64B_WORD3,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB5_32B_WORD7,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB9_16B_WORD3,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x7 line.long 0x0 "WORD114,Message Buffer 14 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS15,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB10_16B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB15_8B_CS,Message Buffer 15 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB3_64B_WORD4,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x170++0x7 line.long 0x0 "MB6_32B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID15,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB10_16B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB15_8B_ID,Message Buffer 15 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB3_64B_WORD5,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x174++0x7 line.long 0x0 "MB6_32B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_16B_WORD0,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB15_8B_WORD0,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB3_64B_WORD6,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB6_32B_WORD0,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x7 line.long 0x0 "WORD015,Message Buffer 15 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_16B_WORD1,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB15_8B_WORD1,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB3_64B_WORD7,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB6_32B_WORD1,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x7 line.long 0x0 "WORD115,Message Buffer 15 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS16,Message Buffer 16 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB10_16B_WORD2,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x180++0x3 line.long 0x0 "MB16_8B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB3_64B_WORD8,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x180++0x7 line.long 0x0 "MB6_32B_WORD2,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID16,Message Buffer 16 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB10_16B_WORD3,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x184++0x3 line.long 0x0 "MB16_8B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB3_64B_WORD9,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x184++0x7 line.long 0x0 "MB6_32B_WORD3,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x188++0x3 line.long 0x0 "MB16_8B_WORD0,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB3_64B_WORD10,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB6_32B_WORD4,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x188++0x7 line.long 0x0 "WORD016,Message Buffer 16 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x18C++0x3 line.long 0x0 "MB16_8B_WORD1,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB3_64B_WORD11,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB6_32B_WORD5,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x7 line.long 0x0 "WORD116,Message Buffer 16 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS17,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB11_16B_WORD0,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x190++0x3 line.long 0x0 "MB17_8B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB3_64B_WORD12,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x190++0x7 line.long 0x0 "MB6_32B_WORD6,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID17,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB11_16B_WORD1,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x194++0x3 line.long 0x0 "MB17_8B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB3_64B_WORD13,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x194++0x7 line.long 0x0 "MB6_32B_WORD7,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD2,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB17_8B_WORD0,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB3_64B_WORD14,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB7_32B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x198++0x7 line.long 0x0 "WORD017,Message Buffer 17 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD3,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB17_8B_WORD1,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB3_64B_WORD15,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB7_32B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x19C++0x7 line.long 0x0 "WORD117,Message Buffer 17 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS18,Message Buffer 18 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB12_16B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB18_8B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB4_64B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x7 line.long 0x0 "MB7_32B_WORD0,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID18,Message Buffer 18 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB12_16B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB18_8B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB4_64B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x7 line.long 0x0 "MB7_32B_WORD1,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD0,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB18_8B_WORD0,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB4_64B_WORD0,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB7_32B_WORD2,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x7 line.long 0x0 "WORD018,Message Buffer 18 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD1,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB18_8B_WORD1,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB4_64B_WORD1,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB7_32B_WORD3,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x7 line.long 0x0 "WORD118,Message Buffer 18 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS19,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB12_16B_WORD2,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x3 line.long 0x0 "MB19_8B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB4_64B_WORD2,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x7 line.long 0x0 "MB7_32B_WORD4,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID19,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB12_16B_WORD3,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x3 line.long 0x0 "MB19_8B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB4_64B_WORD3,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x7 line.long 0x0 "MB7_32B_WORD5,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B8++0x3 line.long 0x0 "MB19_8B_WORD0,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB4_64B_WORD4,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB7_32B_WORD6,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x7 line.long 0x0 "WORD019,Message Buffer 19 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1BC++0x3 line.long 0x0 "MB19_8B_WORD1,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB4_64B_WORD5,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB7_32B_WORD7,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x7 line.long 0x0 "WORD119,Message Buffer 19 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS20,Message Buffer 20 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB13_16B_WORD0,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x3 line.long 0x0 "MB20_8B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB4_64B_WORD6,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x7 line.long 0x0 "MB8_32B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID20,Message Buffer 20 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB13_16B_WORD1,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x3 line.long 0x0 "MB20_8B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB4_64B_WORD7,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x7 line.long 0x0 "MB8_32B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_16B_WORD2,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB20_8B_WORD0,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB4_64B_WORD8,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB8_32B_WORD0,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x7 line.long 0x0 "WORD020,Message Buffer 20 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_WORD3,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB20_8B_WORD1,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB4_64B_WORD9,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB8_32B_WORD1,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x7 line.long 0x0 "WORD120,Message Buffer 20 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS21,Message Buffer 21 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB14_16B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB21_8B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB4_64B_WORD10,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x1D0++0x7 line.long 0x0 "MB8_32B_WORD2,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID21,Message Buffer 21 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB14_16B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB21_8B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB4_64B_WORD11,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x1D4++0x7 line.long 0x0 "MB8_32B_WORD3,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD0,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB21_8B_WORD0,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB4_64B_WORD12,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB8_32B_WORD4,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x7 line.long 0x0 "WORD021,Message Buffer 21 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD1,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB21_8B_WORD1,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB4_64B_WORD13,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB8_32B_WORD5,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x7 line.long 0x0 "WORD121,Message Buffer 21 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS22,Message Buffer 22 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB14_16B_WORD2,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x3 line.long 0x0 "MB22_8B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB4_64B_WORD14,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x7 line.long 0x0 "MB8_32B_WORD6,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID22,Message Buffer 22 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB14_16B_WORD3,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x3 line.long 0x0 "MB22_8B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB4_64B_WORD15,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x7 line.long 0x0 "MB8_32B_WORD7,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB22_8B_WORD0,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1E8++0x3 line.long 0x0 "MB5_64B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB9_32B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x7 line.long 0x0 "WORD022,Message Buffer 22 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB22_8B_WORD1,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1EC++0x3 line.long 0x0 "MB5_64B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB9_32B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x7 line.long 0x0 "WORD122,Message Buffer 22 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS23,Message Buffer 23 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB15_16B_WORD0,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x3 line.long 0x0 "MB23_8B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB5_64B_WORD0,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x7 line.long 0x0 "MB9_32B_WORD0,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID23,Message Buffer 23 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB15_16B_WORD1,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x3 line.long 0x0 "MB23_8B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB5_64B_WORD1,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x7 line.long 0x0 "MB9_32B_WORD1,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD2,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB23_8B_WORD0,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB5_64B_WORD2,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB9_32B_WORD2,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x7 line.long 0x0 "WORD023,Message Buffer 23 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD3,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB23_8B_WORD1,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB5_64B_WORD3,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB9_32B_WORD3,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x7 line.long 0x0 "WORD123,Message Buffer 23 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS24,Message Buffer 24 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB16_16B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB24_8B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB5_64B_WORD4,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x200++0x7 line.long 0x0 "MB9_32B_WORD4,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID24,Message Buffer 24 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB16_16B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB24_8B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB5_64B_WORD5,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x204++0x7 line.long 0x0 "MB9_32B_WORD5,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD0,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB24_8B_WORD0,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB5_64B_WORD6,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB9_32B_WORD6,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x7 line.long 0x0 "WORD024,Message Buffer 24 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD1,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB24_8B_WORD1,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB5_64B_WORD7,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB9_32B_WORD7,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x7 line.long 0x0 "WORD124,Message Buffer 24 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS25,Message Buffer 25 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB10_32B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB16_16B_WORD2,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x210++0x3 line.long 0x0 "MB25_8B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x7 line.long 0x0 "MB5_64B_WORD8,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID25,Message Buffer 25 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB10_32B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB16_16B_WORD3,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x214++0x3 line.long 0x0 "MB25_8B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x7 line.long 0x0 "MB5_64B_WORD9,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD0,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB17_16B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x218++0x3 line.long 0x0 "MB25_8B_WORD0,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB5_64B_WORD10,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x218++0x7 line.long 0x0 "WORD025,Message Buffer 25 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD1,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB17_16B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x21C++0x3 line.long 0x0 "MB25_8B_WORD1,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB5_64B_WORD11,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x7 line.long 0x0 "WORD125,Message Buffer 25 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS26,Message Buffer 26 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x3 line.long 0x0 "MB10_32B_WORD2,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB17_16B_WORD0,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB26_8B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x7 line.long 0x0 "MB5_64B_WORD12,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID26,Message Buffer 26 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x3 line.long 0x0 "MB10_32B_WORD3,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB17_16B_WORD1,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB26_8B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x7 line.long 0x0 "MB5_64B_WORD13,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD4,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB17_16B_WORD2,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB26_8B_WORD0,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB5_64B_WORD14,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x228++0x7 line.long 0x0 "WORD026,Message Buffer 26 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD5,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB17_16B_WORD3,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB26_8B_WORD1,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB5_64B_WORD15,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x7 line.long 0x0 "WORD126,Message Buffer 26 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS27,Message Buffer 27 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB10_32B_WORD6,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x230++0x3 line.long 0x0 "MB18_16B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB27_8B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x7 line.long 0x0 "MB6_64B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID27,Message Buffer 27 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB10_32B_WORD7,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x234++0x3 line.long 0x0 "MB18_16B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB27_8B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x7 line.long 0x0 "MB6_64B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_32B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x238++0x3 line.long 0x0 "MB18_16B_WORD0,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB27_8B_WORD0,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB6_64B_WORD0,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x7 line.long 0x0 "WORD027,Message Buffer 27 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x23C++0x3 line.long 0x0 "MB18_16B_WORD1,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB27_8B_WORD1,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB6_64B_WORD1,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x7 line.long 0x0 "WORD127,Message Buffer 27 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS28,Message Buffer 28 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x3 line.long 0x0 "MB11_32B_WORD0,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB18_16B_WORD2,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB28_8B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x7 line.long 0x0 "MB6_64B_WORD2,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID28,Message Buffer 28 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x3 line.long 0x0 "MB11_32B_WORD1,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB18_16B_WORD3,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB28_8B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x7 line.long 0x0 "MB6_64B_WORD3,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD2,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB19_16B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x248++0x3 line.long 0x0 "MB28_8B_WORD0,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB6_64B_WORD4,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x248++0x7 line.long 0x0 "WORD028,Message Buffer 28 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD3,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB19_16B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x24C++0x3 line.long 0x0 "MB28_8B_WORD1,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB6_64B_WORD5,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x7 line.long 0x0 "WORD128,Message Buffer 28 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS29,Message Buffer 29 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x3 line.long 0x0 "MB11_32B_WORD4,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB19_16B_WORD0,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB29_8B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x7 line.long 0x0 "MB6_64B_WORD6,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID29,Message Buffer 29 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x3 line.long 0x0 "MB11_32B_WORD5,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB19_16B_WORD1,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB29_8B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x7 line.long 0x0 "MB6_64B_WORD7,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD6,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB19_16B_WORD2,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB29_8B_WORD0,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB6_64B_WORD8,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x258++0x7 line.long 0x0 "WORD029,Message Buffer 29 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD7,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB19_16B_WORD3,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB29_8B_WORD1,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB6_64B_WORD9,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x7 line.long 0x0 "WORD129,Message Buffer 29 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS30,Message Buffer 30 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB12_32B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB20_16B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB30_8B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x7 line.long 0x0 "MB6_64B_WORD10,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID30,Message Buffer 30 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB12_32B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB20_16B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB30_8B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x7 line.long 0x0 "MB6_64B_WORD11,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD0,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB20_16B_WORD0,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB30_8B_WORD0,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB6_64B_WORD12,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x268++0x7 line.long 0x0 "WORD030,Message Buffer 30 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD1,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB20_16B_WORD1,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB30_8B_WORD1,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB6_64B_WORD13,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x7 line.long 0x0 "WORD130,Message Buffer 30 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS31,Message Buffer 31 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x3 line.long 0x0 "MB12_32B_WORD2,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB20_16B_WORD2,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB31_8B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x7 line.long 0x0 "MB6_64B_WORD14,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID31,Message Buffer 31 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x3 line.long 0x0 "MB12_32B_WORD3,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB20_16B_WORD3,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB31_8B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x7 line.long 0x0 "MB6_64B_WORD15,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD4,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB21_16B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x3 line.long 0x0 "MB31_8B_WORD0,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB7_64B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x7 line.long 0x0 "WORD031,Message Buffer 31 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD5,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB21_16B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x3 line.long 0x0 "MB31_8B_WORD1,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB7_64B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x7 line.long 0x0 "WORD131,Message Buffer 31 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS32,Message Buffer 32 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x3 line.long 0x0 "MB12_32B_WORD6,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB21_16B_WORD0,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB32_8B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x7 line.long 0x0 "MB7_64B_WORD0,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID32,Message Buffer 32 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x3 line.long 0x0 "MB12_32B_WORD7,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB21_16B_WORD1,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB32_8B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x7 line.long 0x0 "MB7_64B_WORD1,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x288++0x3 line.long 0x0 "MB21_16B_WORD2,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB32_8B_WORD0,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB7_64B_WORD2,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x7 line.long 0x0 "WORD032,Message Buffer 32 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x28C++0x3 line.long 0x0 "MB21_16B_WORD3,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB32_8B_WORD1,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB7_64B_WORD3,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x7 line.long 0x0 "WORD132,Message Buffer 32 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS33,Message Buffer 33 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB13_32B_WORD0,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x290++0x3 line.long 0x0 "MB22_16B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB33_8B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x7 line.long 0x0 "MB7_64B_WORD4,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID33,Message Buffer 33 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB13_32B_WORD1,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x294++0x3 line.long 0x0 "MB22_16B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB33_8B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x7 line.long 0x0 "MB7_64B_WORD5,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD2,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB22_16B_WORD0,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB33_8B_WORD0,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB7_64B_WORD6,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x298++0x7 line.long 0x0 "WORD033,Message Buffer 33 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD3,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB22_16B_WORD1,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB33_8B_WORD1,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB7_64B_WORD7,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x7 line.long 0x0 "WORD133,Message Buffer 33 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS34,Message Buffer 34 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x3 line.long 0x0 "MB13_32B_WORD4,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB22_16B_WORD2,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB34_8B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x7 line.long 0x0 "MB7_64B_WORD8,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID34,Message Buffer 34 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x3 line.long 0x0 "MB13_32B_WORD5,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB22_16B_WORD3,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB34_8B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x7 line.long 0x0 "MB7_64B_WORD9,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD6,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB23_16B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A8++0x3 line.long 0x0 "MB34_8B_WORD0,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB7_64B_WORD10,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x7 line.long 0x0 "WORD034,Message Buffer 34 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD7,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB23_16B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2AC++0x3 line.long 0x0 "MB34_8B_WORD1,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB7_64B_WORD11,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x7 line.long 0x0 "WORD134,Message Buffer 34 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS35,Message Buffer 35 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB14_32B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB23_16B_WORD0,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B0++0x3 line.long 0x0 "MB35_8B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x7 line.long 0x0 "MB7_64B_WORD12,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID35,Message Buffer 35 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB14_32B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB23_16B_WORD1,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2B4++0x3 line.long 0x0 "MB35_8B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x7 line.long 0x0 "MB7_64B_WORD13,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD0,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB23_16B_WORD2,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB35_8B_WORD0,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB7_64B_WORD14,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x7 line.long 0x0 "WORD035,Message Buffer 35 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD1,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB23_16B_WORD3,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB35_8B_WORD1,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB7_64B_WORD15,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x7 line.long 0x0 "WORD135,Message Buffer 35 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS36,Message Buffer 36 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB14_32B_WORD2,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2C0++0x3 line.long 0x0 "MB24_16B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB36_8B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x7 line.long 0x0 "MB8_64B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID36,Message Buffer 36 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB14_32B_WORD3,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2C4++0x3 line.long 0x0 "MB24_16B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB36_8B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x7 line.long 0x0 "MB8_64B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_32B_WORD4,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB24_16B_WORD0,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB36_8B_WORD0,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB8_64B_WORD0,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x7 line.long 0x0 "WORD036,Message Buffer 36 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD5,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB24_16B_WORD1,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB36_8B_WORD1,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB8_64B_WORD1,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x7 line.long 0x0 "WORD136,Message Buffer 36 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS37,Message Buffer 37 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x3 line.long 0x0 "MB14_32B_WORD6,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB24_16B_WORD2,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB37_8B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x7 line.long 0x0 "MB8_64B_WORD2,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID37,Message Buffer 37 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x3 line.long 0x0 "MB14_32B_WORD7,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB24_16B_WORD3,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB37_8B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x7 line.long 0x0 "MB8_64B_WORD3,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB25_16B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB37_8B_WORD0,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x3 line.long 0x0 "MB8_64B_WORD4,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x7 line.long 0x0 "WORD037,Message Buffer 37 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB25_16B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB37_8B_WORD1,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x3 line.long 0x0 "MB8_64B_WORD5,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x7 line.long 0x0 "WORD137,Message Buffer 37 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS38,Message Buffer 38 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x3 line.long 0x0 "MB15_32B_WORD0,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB25_16B_WORD0,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB38_8B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x7 line.long 0x0 "MB8_64B_WORD6,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID38,Message Buffer 38 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x3 line.long 0x0 "MB15_32B_WORD1,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB25_16B_WORD1,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB38_8B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x7 line.long 0x0 "MB8_64B_WORD7,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD2,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB25_16B_WORD2,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB38_8B_WORD0,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB8_64B_WORD8,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x7 line.long 0x0 "WORD038,Message Buffer 38 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD3,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB25_16B_WORD3,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB38_8B_WORD1,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB8_64B_WORD9,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x7 line.long 0x0 "WORD138,Message Buffer 38 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS39,Message Buffer 39 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB15_32B_WORD4,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2F0++0x3 line.long 0x0 "MB26_16B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB39_8B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x7 line.long 0x0 "MB8_64B_WORD10,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID39,Message Buffer 39 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB15_32B_WORD5,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2F4++0x3 line.long 0x0 "MB26_16B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB39_8B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x7 line.long 0x0 "MB8_64B_WORD11,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD6,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB26_16B_WORD0,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB39_8B_WORD0,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB8_64B_WORD12,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x7 line.long 0x0 "WORD039,Message Buffer 39 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD7,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB26_16B_WORD1,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB39_8B_WORD1,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB8_64B_WORD13,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x7 line.long 0x0 "WORD139,Message Buffer 39 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS40,Message Buffer 40 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB16_32B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB26_16B_WORD2,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x300++0x3 line.long 0x0 "MB40_8B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x7 line.long 0x0 "MB8_64B_WORD14,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID40,Message Buffer 40 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB16_32B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB26_16B_WORD3,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x304++0x3 line.long 0x0 "MB40_8B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x7 line.long 0x0 "MB8_64B_WORD15,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD0,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB27_16B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x3 line.long 0x0 "MB40_8B_WORD0,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB9_64B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x7 line.long 0x0 "WORD040,Message Buffer 40 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD1,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB27_16B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x3 line.long 0x0 "MB40_8B_WORD1,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB9_64B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x7 line.long 0x0 "WORD140,Message Buffer 40 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS41,Message Buffer 41 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x3 line.long 0x0 "MB16_32B_WORD2,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB27_16B_WORD0,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB41_8B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x7 line.long 0x0 "MB9_64B_WORD0,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID41,Message Buffer 41 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x3 line.long 0x0 "MB16_32B_WORD3,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB27_16B_WORD1,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB41_8B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x7 line.long 0x0 "MB9_64B_WORD1,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD4,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB27_16B_WORD2,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB41_8B_WORD0,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB9_64B_WORD2,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x7 line.long 0x0 "WORD041,Message Buffer 41 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD5,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB27_16B_WORD3,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB41_8B_WORD1,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB9_64B_WORD3,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x7 line.long 0x0 "WORD141,Message Buffer 41 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS42,Message Buffer 42 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB16_32B_WORD6,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x320++0x3 line.long 0x0 "MB28_16B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB42_8B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x7 line.long 0x0 "MB9_64B_WORD4,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID42,Message Buffer 42 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB16_32B_WORD7,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x324++0x3 line.long 0x0 "MB28_16B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB42_8B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x7 line.long 0x0 "MB9_64B_WORD5,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x328++0x3 line.long 0x0 "MB28_16B_WORD0,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB42_8B_WORD0,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB9_64B_WORD6,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x328++0x7 line.long 0x0 "WORD042,Message Buffer 42 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x32C++0x3 line.long 0x0 "MB28_16B_WORD1,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB42_8B_WORD1,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB9_64B_WORD7,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x7 line.long 0x0 "WORD142,Message Buffer 42 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS43,Message Buffer 43 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x3 line.long 0x0 "MB17_32B_WORD0,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB28_16B_WORD2,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB43_8B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x7 line.long 0x0 "MB9_64B_WORD8,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID43,Message Buffer 43 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x3 line.long 0x0 "MB17_32B_WORD1,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB28_16B_WORD3,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB43_8B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x7 line.long 0x0 "MB9_64B_WORD9,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD2,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB29_16B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x338++0x3 line.long 0x0 "MB43_8B_WORD0,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB9_64B_WORD10,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x338++0x7 line.long 0x0 "WORD043,Message Buffer 43 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD3,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB29_16B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x33C++0x3 line.long 0x0 "MB43_8B_WORD1,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB9_64B_WORD11,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x7 line.long 0x0 "WORD143,Message Buffer 43 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS44,Message Buffer 44 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x3 line.long 0x0 "MB17_32B_WORD4,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB29_16B_WORD0,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB44_8B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x7 line.long 0x0 "MB9_64B_WORD12,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID44,Message Buffer 44 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x3 line.long 0x0 "MB17_32B_WORD5,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB29_16B_WORD1,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB44_8B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x7 line.long 0x0 "MB9_64B_WORD13,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD6,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB29_16B_WORD2,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB44_8B_WORD0,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB9_64B_WORD14,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x348++0x7 line.long 0x0 "WORD044,Message Buffer 44 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD7,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB29_16B_WORD3,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB44_8B_WORD1,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB9_64B_WORD15,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x7 line.long 0x0 "WORD144,Message Buffer 44 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS45,Message Buffer 45 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB10_64B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB18_32B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB30_16B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x7 line.long 0x0 "MB45_8B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID45,Message Buffer 45 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB10_64B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB18_32B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB30_16B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x7 line.long 0x0 "MB45_8B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD0,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB18_32B_WORD0,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB30_16B_WORD0,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB45_8B_WORD0,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x7 line.long 0x0 "WORD045,Message Buffer 45 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD1,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB18_32B_WORD1,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB30_16B_WORD1,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB45_8B_WORD1,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x7 line.long 0x0 "WORD145,Message Buffer 45 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS46,Message Buffer 46 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x360++0x3 line.long 0x0 "MB10_64B_WORD2,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB18_32B_WORD2,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB30_16B_WORD2,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x7 line.long 0x0 "MB46_8B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID46,Message Buffer 46 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x364++0x3 line.long 0x0 "MB10_64B_WORD3,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB18_32B_WORD3,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB30_16B_WORD3,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x7 line.long 0x0 "MB46_8B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD4,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB18_32B_WORD4,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB31_16B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x368++0x3 line.long 0x0 "MB46_8B_WORD0,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x368++0x7 line.long 0x0 "WORD046,Message Buffer 46 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD5,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB18_32B_WORD5,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB31_16B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x36C++0x3 line.long 0x0 "MB46_8B_WORD1,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x7 line.long 0x0 "WORD146,Message Buffer 46 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS47,Message Buffer 47 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x370++0x3 line.long 0x0 "MB10_64B_WORD6,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB18_32B_WORD6,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB31_16B_WORD0,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x370++0x7 line.long 0x0 "MB47_8B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID47,Message Buffer 47 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x374++0x3 line.long 0x0 "MB10_64B_WORD7,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB18_32B_WORD7,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB31_16B_WORD1,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x374++0x7 line.long 0x0 "MB47_8B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD8,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB19_32B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x378++0x3 line.long 0x0 "MB31_16B_WORD2,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB47_8B_WORD0,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x378++0x7 line.long 0x0 "WORD047,Message Buffer 47 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD9,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB19_32B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x37C++0x3 line.long 0x0 "MB31_16B_WORD3,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB47_8B_WORD1,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x7 line.long 0x0 "WORD147,Message Buffer 47 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS48,Message Buffer 48 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x3 line.long 0x0 "MB10_64B_WORD10,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB19_32B_WORD0,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB32_16B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x7 line.long 0x0 "MB48_8B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID48,Message Buffer 48 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x3 line.long 0x0 "MB10_64B_WORD11,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB19_32B_WORD1,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB32_16B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x7 line.long 0x0 "MB48_8B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD12,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB19_32B_WORD2,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB32_16B_WORD0,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB48_8B_WORD0,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x7 line.long 0x0 "WORD048,Message Buffer 48 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD13,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB19_32B_WORD3,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB32_16B_WORD1,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB48_8B_WORD1,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x7 line.long 0x0 "WORD148,Message Buffer 48 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS49,Message Buffer 49 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x390++0x3 line.long 0x0 "MB10_64B_WORD14,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB19_32B_WORD4,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB32_16B_WORD2,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x390++0x7 line.long 0x0 "MB49_8B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID49,Message Buffer 49 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x394++0x3 line.long 0x0 "MB10_64B_WORD15,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB19_32B_WORD5,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB32_16B_WORD3,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x394++0x7 line.long 0x0 "MB49_8B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB19_32B_WORD6,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x398++0x3 line.long 0x0 "MB33_16B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB49_8B_WORD0,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x398++0x7 line.long 0x0 "WORD049,Message Buffer 49 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB19_32B_WORD7,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x3 line.long 0x0 "MB33_16B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB49_8B_WORD1,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x7 line.long 0x0 "WORD149,Message Buffer 49 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS50,Message Buffer 50 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB11_64B_WORD0,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x3 line.long 0x0 "MB20_32B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB33_16B_WORD0,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x7 line.long 0x0 "MB50_8B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID50,Message Buffer 50 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB11_64B_WORD1,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x3 line.long 0x0 "MB20_32B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB33_16B_WORD1,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x7 line.long 0x0 "MB50_8B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD2,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB20_32B_WORD0,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB33_16B_WORD2,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB50_8B_WORD0,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x7 line.long 0x0 "WORD050,Message Buffer 50 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD3,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB20_32B_WORD1,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB33_16B_WORD3,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB50_8B_WORD1,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x7 line.long 0x0 "WORD150,Message Buffer 50 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS51,Message Buffer 51 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x3 line.long 0x0 "MB11_64B_WORD4,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB20_32B_WORD2,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB34_16B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x7 line.long 0x0 "MB51_8B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID51,Message Buffer 51 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x3 line.long 0x0 "MB11_64B_WORD5,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB20_32B_WORD3,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB34_16B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x7 line.long 0x0 "MB51_8B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD6,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB20_32B_WORD4,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB34_16B_WORD0,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB51_8B_WORD0,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x7 line.long 0x0 "WORD051,Message Buffer 51 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD7,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB20_32B_WORD5,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB34_16B_WORD1,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB51_8B_WORD1,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x7 line.long 0x0 "WORD151,Message Buffer 51 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS52,Message Buffer 52 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C0++0x3 line.long 0x0 "MB11_64B_WORD8,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB20_32B_WORD6,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB34_16B_WORD2,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x7 line.long 0x0 "MB52_8B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID52,Message Buffer 52 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3C4++0x3 line.long 0x0 "MB11_64B_WORD9,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB20_32B_WORD7,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB34_16B_WORD3,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x7 line.long 0x0 "MB52_8B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD10,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x3 line.long 0x0 "MB21_32B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB35_16B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB52_8B_WORD0,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x7 line.long 0x0 "WORD052,Message Buffer 52 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD11,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x3 line.long 0x0 "MB21_32B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB35_16B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB52_8B_WORD1,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x7 line.long 0x0 "WORD152,Message Buffer 52 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS53,Message Buffer 53 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3D0++0x3 line.long 0x0 "MB11_64B_WORD12,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB21_32B_WORD0,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB35_16B_WORD0,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x7 line.long 0x0 "MB53_8B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID53,Message Buffer 53 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3D4++0x3 line.long 0x0 "MB11_64B_WORD13,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB21_32B_WORD1,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB35_16B_WORD1,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x7 line.long 0x0 "MB53_8B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD14,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB21_32B_WORD2,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB35_16B_WORD2,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB53_8B_WORD0,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x7 line.long 0x0 "WORD053,Message Buffer 53 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD15,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB21_32B_WORD3,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB35_16B_WORD3,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB53_8B_WORD1,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x7 line.long 0x0 "WORD153,Message Buffer 53 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS54,Message Buffer 54 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB12_64B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB21_32B_WORD4,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3E0++0x3 line.long 0x0 "MB36_16B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x7 line.long 0x0 "MB54_8B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID54,Message Buffer 54 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB12_64B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB21_32B_WORD5,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3E4++0x3 line.long 0x0 "MB36_16B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x7 line.long 0x0 "MB54_8B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD0,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB21_32B_WORD6,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB36_16B_WORD0,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB54_8B_WORD0,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x7 line.long 0x0 "WORD054,Message Buffer 54 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD1,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB21_32B_WORD7,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB36_16B_WORD1,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB54_8B_WORD1,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x7 line.long 0x0 "WORD154,Message Buffer 54 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS55,Message Buffer 55 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB12_64B_WORD2,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x3 line.long 0x0 "MB22_32B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB36_16B_WORD2,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x7 line.long 0x0 "MB55_8B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID55,Message Buffer 55 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB12_64B_WORD3,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x3 line.long 0x0 "MB22_32B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB36_16B_WORD3,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x7 line.long 0x0 "MB55_8B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD4,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB22_32B_WORD0,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB37_16B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F8++0x3 line.long 0x0 "MB55_8B_WORD0,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x7 line.long 0x0 "WORD055,Message Buffer 55 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD5,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB22_32B_WORD1,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB37_16B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3FC++0x3 line.long 0x0 "MB55_8B_WORD1,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x7 line.long 0x0 "WORD155,Message Buffer 55 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS56,Message Buffer 56 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x400++0x3 line.long 0x0 "MB12_64B_WORD6,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB22_32B_WORD2,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB37_16B_WORD0,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x400++0x7 line.long 0x0 "MB56_8B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID56,Message Buffer 56 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x404++0x3 line.long 0x0 "MB12_64B_WORD7,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB22_32B_WORD3,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB37_16B_WORD1,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x404++0x7 line.long 0x0 "MB56_8B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD8,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB22_32B_WORD4,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB37_16B_WORD2,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB56_8B_WORD0,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x408++0x7 line.long 0x0 "WORD056,Message Buffer 56 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD9,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB22_32B_WORD5,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB37_16B_WORD3,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB56_8B_WORD1,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x7 line.long 0x0 "WORD156,Message Buffer 56 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS57,Message Buffer 57 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x3 line.long 0x0 "MB12_64B_WORD10,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB22_32B_WORD6,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB38_16B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x7 line.long 0x0 "MB57_8B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID57,Message Buffer 57 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x3 line.long 0x0 "MB12_64B_WORD11,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB22_32B_WORD7,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB38_16B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x7 line.long 0x0 "MB57_8B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD12,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB23_32B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x418++0x3 line.long 0x0 "MB38_16B_WORD0,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB57_8B_WORD0,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x7 line.long 0x0 "WORD057,Message Buffer 57 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD13,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB23_32B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x41C++0x3 line.long 0x0 "MB38_16B_WORD1,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB57_8B_WORD1,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x7 line.long 0x0 "WORD157,Message Buffer 57 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS58,Message Buffer 58 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x420++0x3 line.long 0x0 "MB12_64B_WORD14,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB23_32B_WORD0,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB38_16B_WORD2,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x420++0x7 line.long 0x0 "MB58_8B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID58,Message Buffer 58 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x424++0x3 line.long 0x0 "MB12_64B_WORD15,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB23_32B_WORD1,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB38_16B_WORD3,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x424++0x7 line.long 0x0 "MB58_8B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB23_32B_WORD2,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x428++0x3 line.long 0x0 "MB39_16B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB58_8B_WORD0,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x428++0x7 line.long 0x0 "WORD058,Message Buffer 58 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB23_32B_WORD3,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x3 line.long 0x0 "MB39_16B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB58_8B_WORD1,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x7 line.long 0x0 "WORD158,Message Buffer 58 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS59,Message Buffer 59 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x430++0x3 line.long 0x0 "MB13_64B_WORD0,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB23_32B_WORD4,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB39_16B_WORD0,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x7 line.long 0x0 "MB59_8B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID59,Message Buffer 59 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x434++0x3 line.long 0x0 "MB13_64B_WORD1,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB23_32B_WORD5,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB39_16B_WORD1,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x7 line.long 0x0 "MB59_8B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD2,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB23_32B_WORD6,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB39_16B_WORD2,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB59_8B_WORD0,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x438++0x7 line.long 0x0 "WORD059,Message Buffer 59 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD3,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB23_32B_WORD7,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB39_16B_WORD3,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB59_8B_WORD1,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x7 line.long 0x0 "WORD159,Message Buffer 59 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS60,Message Buffer 60 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB13_64B_WORD4,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x440++0x3 line.long 0x0 "MB24_32B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB40_16B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x7 line.long 0x0 "MB60_8B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID60,Message Buffer 60 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB13_64B_WORD5,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x444++0x3 line.long 0x0 "MB24_32B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB40_16B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x7 line.long 0x0 "MB60_8B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD6,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB24_32B_WORD0,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB40_16B_WORD0,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB60_8B_WORD0,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x7 line.long 0x0 "WORD060,Message Buffer 60 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD7,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB24_32B_WORD1,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB40_16B_WORD1,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB60_8B_WORD1,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x7 line.long 0x0 "WORD160,Message Buffer 60 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS61,Message Buffer 61 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x450++0x3 line.long 0x0 "MB13_64B_WORD8,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB24_32B_WORD2,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB40_16B_WORD2,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x7 line.long 0x0 "MB61_8B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID61,Message Buffer 61 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x454++0x3 line.long 0x0 "MB13_64B_WORD9,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB24_32B_WORD3,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB40_16B_WORD3,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x7 line.long 0x0 "MB61_8B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD10,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB24_32B_WORD4,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB41_16B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x458++0x3 line.long 0x0 "MB61_8B_WORD0,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x458++0x7 line.long 0x0 "WORD061,Message Buffer 61 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD11,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB24_32B_WORD5,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB41_16B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x45C++0x3 line.long 0x0 "MB61_8B_WORD1,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x7 line.long 0x0 "WORD161,Message Buffer 61 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS62,Message Buffer 62 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x460++0x3 line.long 0x0 "MB13_64B_WORD12,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB24_32B_WORD6,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB41_16B_WORD0,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x460++0x7 line.long 0x0 "MB62_8B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID62,Message Buffer 62 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x464++0x3 line.long 0x0 "MB13_64B_WORD13,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB24_32B_WORD7,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB41_16B_WORD1,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x464++0x7 line.long 0x0 "MB62_8B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD14,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB25_32B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x468++0x3 line.long 0x0 "MB41_16B_WORD2,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB62_8B_WORD0,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x468++0x7 line.long 0x0 "WORD062,Message Buffer 62 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD15,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB25_32B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x46C++0x3 line.long 0x0 "MB41_16B_WORD3,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB62_8B_WORD1,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x7 line.long 0x0 "WORD162,Message Buffer 62 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS63,Message Buffer 63 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB14_64B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB25_32B_WORD0,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x470++0x3 line.long 0x0 "MB42_16B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x7 line.long 0x0 "MB63_8B_CS,Message Buffer 63 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID63,Message Buffer 63 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB14_64B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB25_32B_WORD1,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x474++0x3 line.long 0x0 "MB42_16B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x7 line.long 0x0 "MB63_8B_ID,Message Buffer 63 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD0,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB25_32B_WORD2,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB42_16B_WORD0,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB63_8B_WORD0,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x7 line.long 0x0 "WORD063,Message Buffer 63 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD1,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB25_32B_WORD3,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB42_16B_WORD1,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB63_8B_WORD1,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x7 line.long 0x0 "WORD163,Message Buffer 63 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS64,Message Buffer 64 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x480++0x3 line.long 0x0 "MB14_64B_WORD2,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB25_32B_WORD4,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB42_16B_WORD2,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x7 line.long 0x0 "MB64_8B_CS,Message Buffer 64 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID64,Message Buffer 64 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x484++0x3 line.long 0x0 "MB14_64B_WORD3,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB25_32B_WORD5,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB42_16B_WORD3,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x7 line.long 0x0 "MB64_8B_ID,Message Buffer 64 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD4,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB25_32B_WORD6,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB43_16B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x488++0x3 line.long 0x0 "MB64_8B_WORD0,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x488++0x7 line.long 0x0 "WORD064,Message Buffer 64 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD5,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB25_32B_WORD7,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB43_16B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x48C++0x3 line.long 0x0 "MB64_8B_WORD1,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x7 line.long 0x0 "WORD164,Message Buffer 64 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS65,Message Buffer 65 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB14_64B_WORD6,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x490++0x3 line.long 0x0 "MB26_32B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB43_16B_WORD0,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x490++0x7 line.long 0x0 "MB65_8B_CS,Message Buffer 65 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID65,Message Buffer 65 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB14_64B_WORD7,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x494++0x3 line.long 0x0 "MB26_32B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB43_16B_WORD1,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x494++0x7 line.long 0x0 "MB65_8B_ID,Message Buffer 65 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD8,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB26_32B_WORD0,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB43_16B_WORD2,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB65_8B_WORD0,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x7 line.long 0x0 "WORD065,Message Buffer 65 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD9,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB26_32B_WORD1,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB43_16B_WORD3,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB65_8B_WORD1,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x7 line.long 0x0 "WORD165,Message Buffer 65 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS66,Message Buffer 66 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x3 line.long 0x0 "MB14_64B_WORD10,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB26_32B_WORD2,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB44_16B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x7 line.long 0x0 "MB66_8B_CS,Message Buffer 66 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID66,Message Buffer 66 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x3 line.long 0x0 "MB14_64B_WORD11,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB26_32B_WORD3,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB44_16B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x7 line.long 0x0 "MB66_8B_ID,Message Buffer 66 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD12,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB26_32B_WORD4,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB44_16B_WORD0,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB66_8B_WORD0,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x7 line.long 0x0 "WORD066,Message Buffer 66 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD13,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB26_32B_WORD5,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB44_16B_WORD1,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB66_8B_WORD1,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x7 line.long 0x0 "WORD166,Message Buffer 66 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS67,Message Buffer 67 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B0++0x3 line.long 0x0 "MB14_64B_WORD14,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB26_32B_WORD6,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB44_16B_WORD2,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x7 line.long 0x0 "MB67_8B_CS,Message Buffer 67 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID67,Message Buffer 67 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4B4++0x3 line.long 0x0 "MB14_64B_WORD15,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB26_32B_WORD7,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB44_16B_WORD3,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x7 line.long 0x0 "MB67_8B_ID,Message Buffer 67 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB27_32B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB45_16B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB67_8B_WORD0,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4B8++0x7 line.long 0x0 "WORD067,Message Buffer 67 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB27_32B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB45_16B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB67_8B_WORD1,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4BC++0x7 line.long 0x0 "WORD167,Message Buffer 67 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS68,Message Buffer 68 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4C0++0x3 line.long 0x0 "MB15_64B_WORD0,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB27_32B_WORD0,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB45_16B_WORD0,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x7 line.long 0x0 "MB68_8B_CS,Message Buffer 68 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID68,Message Buffer 68 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4C4++0x3 line.long 0x0 "MB15_64B_WORD1,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB27_32B_WORD1,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB45_16B_WORD1,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x7 line.long 0x0 "MB68_8B_ID,Message Buffer 68 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD2,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB27_32B_WORD2,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB45_16B_WORD2,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB68_8B_WORD0,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x7 line.long 0x0 "WORD068,Message Buffer 68 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD3,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB27_32B_WORD3,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB45_16B_WORD3,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB68_8B_WORD1,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x7 line.long 0x0 "WORD168,Message Buffer 68 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS69,Message Buffer 69 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x3 line.long 0x0 "MB15_64B_WORD4,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB27_32B_WORD4,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB46_16B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x7 line.long 0x0 "MB69_8B_CS,Message Buffer 69 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID69,Message Buffer 69 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x3 line.long 0x0 "MB15_64B_WORD5,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB27_32B_WORD5,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB46_16B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x7 line.long 0x0 "MB69_8B_ID,Message Buffer 69 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD6,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB27_32B_WORD6,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB46_16B_WORD0,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB69_8B_WORD0,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x7 line.long 0x0 "WORD069,Message Buffer 69 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD7,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB27_32B_WORD7,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB46_16B_WORD1,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB69_8B_WORD1,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x7 line.long 0x0 "WORD169,Message Buffer 69 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS70,Message Buffer 70 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB15_64B_WORD8,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x3 line.long 0x0 "MB28_32B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB46_16B_WORD2,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x7 line.long 0x0 "MB70_8B_CS,Message Buffer 70 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID70,Message Buffer 70 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB15_64B_WORD9,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x3 line.long 0x0 "MB28_32B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB46_16B_WORD3,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x7 line.long 0x0 "MB70_8B_ID,Message Buffer 70 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD10,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB28_32B_WORD0,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB47_16B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E8++0x3 line.long 0x0 "MB70_8B_WORD0,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x7 line.long 0x0 "WORD070,Message Buffer 70 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD11,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB28_32B_WORD1,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB47_16B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4EC++0x3 line.long 0x0 "MB70_8B_WORD1,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x7 line.long 0x0 "WORD170,Message Buffer 70 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS71,Message Buffer 71 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4F0++0x3 line.long 0x0 "MB15_64B_WORD12,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB28_32B_WORD2,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB47_16B_WORD0,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x7 line.long 0x0 "MB71_8B_CS,Message Buffer 71 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID71,Message Buffer 71 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4F4++0x3 line.long 0x0 "MB15_64B_WORD13,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB28_32B_WORD3,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB47_16B_WORD1,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x7 line.long 0x0 "MB71_8B_ID,Message Buffer 71 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD14,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB28_32B_WORD4,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB47_16B_WORD2,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB71_8B_WORD0,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x7 line.long 0x0 "WORD071,Message Buffer 71 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD15,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB28_32B_WORD5,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB47_16B_WORD3,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB71_8B_WORD1,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x7 line.long 0x0 "WORD171,Message Buffer 71 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS72,Message Buffer 72 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB16_64B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB28_32B_WORD6,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x500++0x3 line.long 0x0 "MB48_16B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x7 line.long 0x0 "MB72_8B_CS,Message Buffer 72 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID72,Message Buffer 72 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB16_64B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB28_32B_WORD7,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x504++0x3 line.long 0x0 "MB48_16B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x7 line.long 0x0 "MB72_8B_ID,Message Buffer 72 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD0,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB29_32B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x508++0x3 line.long 0x0 "MB48_16B_WORD0,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB72_8B_WORD0,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x7 line.long 0x0 "WORD072,Message Buffer 72 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD1,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB29_32B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x50C++0x3 line.long 0x0 "MB48_16B_WORD1,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB72_8B_WORD1,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x7 line.long 0x0 "WORD172,Message Buffer 72 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS73,Message Buffer 73 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x510++0x3 line.long 0x0 "MB16_64B_WORD2,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB29_32B_WORD0,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB48_16B_WORD2,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x7 line.long 0x0 "MB73_8B_CS,Message Buffer 73 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID73,Message Buffer 73 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x514++0x3 line.long 0x0 "MB16_64B_WORD3,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB29_32B_WORD1,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB48_16B_WORD3,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x7 line.long 0x0 "MB73_8B_ID,Message Buffer 73 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD4,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB29_32B_WORD2,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB49_16B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x518++0x3 line.long 0x0 "MB73_8B_WORD0,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x518++0x7 line.long 0x0 "WORD073,Message Buffer 73 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD5,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB29_32B_WORD3,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB49_16B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x51C++0x3 line.long 0x0 "MB73_8B_WORD1,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x7 line.long 0x0 "WORD173,Message Buffer 73 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS74,Message Buffer 74 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x520++0x3 line.long 0x0 "MB16_64B_WORD6,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB29_32B_WORD4,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB49_16B_WORD0,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x520++0x7 line.long 0x0 "MB74_8B_CS,Message Buffer 74 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID74,Message Buffer 74 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x524++0x3 line.long 0x0 "MB16_64B_WORD7,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB29_32B_WORD5,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB49_16B_WORD1,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x524++0x7 line.long 0x0 "MB74_8B_ID,Message Buffer 74 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD8,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB29_32B_WORD6,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB49_16B_WORD2,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB74_8B_WORD0,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x528++0x7 line.long 0x0 "WORD074,Message Buffer 74 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD9,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB29_32B_WORD7,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB49_16B_WORD3,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB74_8B_WORD1,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x7 line.long 0x0 "WORD174,Message Buffer 74 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS75,Message Buffer 75 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB16_64B_WORD10,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x530++0x3 line.long 0x0 "MB30_32B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB50_16B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x7 line.long 0x0 "MB75_8B_CS,Message Buffer 75 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID75,Message Buffer 75 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB16_64B_WORD11,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x534++0x3 line.long 0x0 "MB30_32B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB50_16B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x7 line.long 0x0 "MB75_8B_ID,Message Buffer 75 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD12,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB30_32B_WORD0,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB50_16B_WORD0,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB75_8B_WORD0,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x7 line.long 0x0 "WORD075,Message Buffer 75 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD13,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB30_32B_WORD1,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB50_16B_WORD1,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB75_8B_WORD1,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x7 line.long 0x0 "WORD175,Message Buffer 75 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS76,Message Buffer 76 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x540++0x3 line.long 0x0 "MB16_64B_WORD14,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB30_32B_WORD2,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB50_16B_WORD2,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x7 line.long 0x0 "MB76_8B_CS,Message Buffer 76 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID76,Message Buffer 76 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x544++0x3 line.long 0x0 "MB16_64B_WORD15,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB30_32B_WORD3,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB50_16B_WORD3,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x7 line.long 0x0 "MB76_8B_ID,Message Buffer 76 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB30_32B_WORD4,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x548++0x3 line.long 0x0 "MB51_16B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB76_8B_WORD0,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x548++0x7 line.long 0x0 "WORD076,Message Buffer 76 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB30_32B_WORD5,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x3 line.long 0x0 "MB51_16B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB76_8B_WORD1,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x7 line.long 0x0 "WORD176,Message Buffer 76 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS77,Message Buffer 77 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x550++0x3 line.long 0x0 "MB17_64B_WORD0,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB30_32B_WORD6,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB51_16B_WORD0,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x7 line.long 0x0 "MB77_8B_CS,Message Buffer 77 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID77,Message Buffer 77 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x554++0x3 line.long 0x0 "MB17_64B_WORD1,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB30_32B_WORD7,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB51_16B_WORD1,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x7 line.long 0x0 "MB77_8B_ID,Message Buffer 77 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD2,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB31_32B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x558++0x3 line.long 0x0 "MB51_16B_WORD2,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB77_8B_WORD0,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x558++0x7 line.long 0x0 "WORD077,Message Buffer 77 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD3,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB31_32B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x55C++0x3 line.long 0x0 "MB51_16B_WORD3,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB77_8B_WORD1,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x7 line.long 0x0 "WORD177,Message Buffer 77 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS78,Message Buffer 78 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x3 line.long 0x0 "MB17_64B_WORD4,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB31_32B_WORD0,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB52_16B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x7 line.long 0x0 "MB78_8B_CS,Message Buffer 78 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID78,Message Buffer 78 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x3 line.long 0x0 "MB17_64B_WORD5,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB31_32B_WORD1,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB52_16B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x7 line.long 0x0 "MB78_8B_ID,Message Buffer 78 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD6,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB31_32B_WORD2,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB52_16B_WORD0,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB78_8B_WORD0,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x7 line.long 0x0 "WORD078,Message Buffer 78 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD7,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB31_32B_WORD3,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB52_16B_WORD1,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB78_8B_WORD1,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x7 line.long 0x0 "WORD178,Message Buffer 78 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS79,Message Buffer 79 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x570++0x3 line.long 0x0 "MB17_64B_WORD8,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB31_32B_WORD4,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB52_16B_WORD2,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x570++0x7 line.long 0x0 "MB79_8B_CS,Message Buffer 79 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID79,Message Buffer 79 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x574++0x3 line.long 0x0 "MB17_64B_WORD9,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB31_32B_WORD5,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB52_16B_WORD3,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x574++0x7 line.long 0x0 "MB79_8B_ID,Message Buffer 79 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD10,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB31_32B_WORD6,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB53_16B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x578++0x3 line.long 0x0 "MB79_8B_WORD0,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x578++0x7 line.long 0x0 "WORD079,Message Buffer 79 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD11,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB31_32B_WORD7,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB53_16B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x57C++0x3 line.long 0x0 "MB79_8B_WORD1,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x7 line.long 0x0 "WORD179,Message Buffer 79 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS80,Message Buffer 80 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB17_64B_WORD12,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x580++0x3 line.long 0x0 "MB32_32B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB53_16B_WORD0,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x580++0x7 line.long 0x0 "MB80_8B_CS,Message Buffer 80 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID80,Message Buffer 80 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB17_64B_WORD13,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x584++0x3 line.long 0x0 "MB32_32B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB53_16B_WORD1,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x584++0x7 line.long 0x0 "MB80_8B_ID,Message Buffer 80 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD14,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB32_32B_WORD0,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB53_16B_WORD2,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB80_8B_WORD0,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x7 line.long 0x0 "WORD080,Message Buffer 80 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD15,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB32_32B_WORD1,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB53_16B_WORD3,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB80_8B_WORD1,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x7 line.long 0x0 "WORD180,Message Buffer 80 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS81,Message Buffer 81 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB18_64B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB32_32B_WORD2,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x590++0x3 line.long 0x0 "MB54_16B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x7 line.long 0x0 "MB81_8B_CS,Message Buffer 81 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID81,Message Buffer 81 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB18_64B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB32_32B_WORD3,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x594++0x3 line.long 0x0 "MB54_16B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x7 line.long 0x0 "MB81_8B_ID,Message Buffer 81 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD0,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB32_32B_WORD4,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB54_16B_WORD0,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB81_8B_WORD0,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x7 line.long 0x0 "WORD081,Message Buffer 81 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD1,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB32_32B_WORD5,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB54_16B_WORD1,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB81_8B_WORD1,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x7 line.long 0x0 "WORD181,Message Buffer 81 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS82,Message Buffer 82 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A0++0x3 line.long 0x0 "MB18_64B_WORD2,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB32_32B_WORD6,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB54_16B_WORD2,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x7 line.long 0x0 "MB82_8B_CS,Message Buffer 82 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID82,Message Buffer 82 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5A4++0x3 line.long 0x0 "MB18_64B_WORD3,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB32_32B_WORD7,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB54_16B_WORD3,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x7 line.long 0x0 "MB82_8B_ID,Message Buffer 82 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD4,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x3 line.long 0x0 "MB33_32B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB55_16B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB82_8B_WORD0,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x7 line.long 0x0 "WORD082,Message Buffer 82 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD5,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x3 line.long 0x0 "MB33_32B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB55_16B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB82_8B_WORD1,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x7 line.long 0x0 "WORD182,Message Buffer 82 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS83,Message Buffer 83 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5B0++0x3 line.long 0x0 "MB18_64B_WORD6,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB33_32B_WORD0,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB55_16B_WORD0,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x7 line.long 0x0 "MB83_8B_CS,Message Buffer 83 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID83,Message Buffer 83 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5B4++0x3 line.long 0x0 "MB18_64B_WORD7,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB33_32B_WORD1,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB55_16B_WORD1,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x7 line.long 0x0 "MB83_8B_ID,Message Buffer 83 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD8,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB33_32B_WORD2,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB55_16B_WORD2,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB83_8B_WORD0,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x7 line.long 0x0 "WORD083,Message Buffer 83 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD9,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB33_32B_WORD3,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB55_16B_WORD3,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB83_8B_WORD1,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x7 line.long 0x0 "WORD183,Message Buffer 83 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS84,Message Buffer 84 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x3 line.long 0x0 "MB18_64B_WORD10,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB33_32B_WORD4,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB56_16B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x7 line.long 0x0 "MB84_8B_CS,Message Buffer 84 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID84,Message Buffer 84 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x3 line.long 0x0 "MB18_64B_WORD11,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB33_32B_WORD5,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB56_16B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x7 line.long 0x0 "MB84_8B_ID,Message Buffer 84 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD12,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB33_32B_WORD6,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB56_16B_WORD0,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB84_8B_WORD0,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x7 line.long 0x0 "WORD084,Message Buffer 84 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD13,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB33_32B_WORD7,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB56_16B_WORD1,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB84_8B_WORD1,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x7 line.long 0x0 "WORD184,Message Buffer 84 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS85,Message Buffer 85 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB18_64B_WORD14,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x3 line.long 0x0 "MB34_32B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB56_16B_WORD2,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x7 line.long 0x0 "MB85_8B_CS,Message Buffer 85 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID85,Message Buffer 85 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB18_64B_WORD15,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x3 line.long 0x0 "MB34_32B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB56_16B_WORD3,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x7 line.long 0x0 "MB85_8B_ID,Message Buffer 85 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_CS,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB34_32B_WORD0,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x3 line.long 0x0 "MB57_16B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB85_8B_WORD0,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x7 line.long 0x0 "WORD085,Message Buffer 85 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_ID,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB34_32B_WORD1,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x3 line.long 0x0 "MB57_16B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB85_8B_WORD1,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x7 line.long 0x0 "WORD185,Message Buffer 85 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS86,Message Buffer 86 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5E0++0x3 line.long 0x0 "MB19_64B_WORD0,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB34_32B_WORD2,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB57_16B_WORD0,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x7 line.long 0x0 "MB86_8B_CS,Message Buffer 86 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID86,Message Buffer 86 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5E4++0x3 line.long 0x0 "MB19_64B_WORD1,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB34_32B_WORD3,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB57_16B_WORD1,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x7 line.long 0x0 "MB86_8B_ID,Message Buffer 86 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD2,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB34_32B_WORD4,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB57_16B_WORD2,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB86_8B_WORD0,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x7 line.long 0x0 "WORD086,Message Buffer 86 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD3,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB34_32B_WORD5,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB57_16B_WORD3,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB86_8B_WORD1,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x7 line.long 0x0 "WORD186,Message Buffer 86 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS87,Message Buffer 87 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x3 line.long 0x0 "MB19_64B_WORD4,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB34_32B_WORD6,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB58_16B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x7 line.long 0x0 "MB87_8B_CS,Message Buffer 87 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID87,Message Buffer 87 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x3 line.long 0x0 "MB19_64B_WORD5,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB34_32B_WORD7,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB58_16B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x7 line.long 0x0 "MB87_8B_ID,Message Buffer 87 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD6,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB35_32B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F8++0x3 line.long 0x0 "MB58_16B_WORD0,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB87_8B_WORD0,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x7 line.long 0x0 "WORD087,Message Buffer 87 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD7,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB35_32B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5FC++0x3 line.long 0x0 "MB58_16B_WORD1,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB87_8B_WORD1,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x7 line.long 0x0 "WORD187,Message Buffer 87 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS88,Message Buffer 88 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x600++0x3 line.long 0x0 "MB19_64B_WORD8,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB35_32B_WORD0,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB58_16B_WORD2,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x600++0x7 line.long 0x0 "MB88_8B_CS,Message Buffer 88 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID88,Message Buffer 88 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x604++0x3 line.long 0x0 "MB19_64B_WORD9,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB35_32B_WORD1,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB58_16B_WORD3,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x604++0x7 line.long 0x0 "MB88_8B_ID,Message Buffer 88 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD10,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB35_32B_WORD2,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB59_16B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x608++0x3 line.long 0x0 "MB88_8B_WORD0,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x608++0x7 line.long 0x0 "WORD088,Message Buffer 88 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD11,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB35_32B_WORD3,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB59_16B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x60C++0x3 line.long 0x0 "MB88_8B_WORD1,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x7 line.long 0x0 "WORD188,Message Buffer 88 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS89,Message Buffer 89 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x610++0x3 line.long 0x0 "MB19_64B_WORD12,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB35_32B_WORD4,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB59_16B_WORD0,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x610++0x7 line.long 0x0 "MB89_8B_CS,Message Buffer 89 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID89,Message Buffer 89 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x614++0x3 line.long 0x0 "MB19_64B_WORD13,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB35_32B_WORD5,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB59_16B_WORD1,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x614++0x7 line.long 0x0 "MB89_8B_ID,Message Buffer 89 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD14,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB35_32B_WORD6,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB59_16B_WORD2,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB89_8B_WORD0,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x618++0x7 line.long 0x0 "WORD089,Message Buffer 89 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD15,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB35_32B_WORD7,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB59_16B_WORD3,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB89_8B_WORD1,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x7 line.long 0x0 "WORD189,Message Buffer 89 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS90,Message Buffer 90 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB20_64B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB60_16B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x7 line.long 0x0 "MB90_8B_CS,Message Buffer 90 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID90,Message Buffer 90 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB20_64B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB60_16B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x7 line.long 0x0 "MB90_8B_ID,Message Buffer 90 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD0,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB60_16B_WORD0,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB90_8B_WORD0,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x7 line.long 0x0 "WORD090,Message Buffer 90 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD1,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB60_16B_WORD1,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB90_8B_WORD1,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x7 line.long 0x0 "WORD190,Message Buffer 90 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS91,Message Buffer 91 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x630++0x3 line.long 0x0 "MB20_64B_WORD2,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x3 line.long 0x0 "MB60_16B_WORD2,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x7 line.long 0x0 "MB91_8B_CS,Message Buffer 91 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID91,Message Buffer 91 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x634++0x3 line.long 0x0 "MB20_64B_WORD3,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x3 line.long 0x0 "MB60_16B_WORD3,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x7 line.long 0x0 "MB91_8B_ID,Message Buffer 91 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD4,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x638++0x3 line.long 0x0 "MB61_16B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x638++0x3 line.long 0x0 "MB91_8B_WORD0,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x638++0x7 line.long 0x0 "WORD091,Message Buffer 91 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD5,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x3 line.long 0x0 "MB61_16B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x63C++0x3 line.long 0x0 "MB91_8B_WORD1,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x7 line.long 0x0 "WORD191,Message Buffer 91 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS92,Message Buffer 92 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x640++0x3 line.long 0x0 "MB20_64B_WORD6,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x640++0x3 line.long 0x0 "MB61_16B_WORD0,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x640++0x7 line.long 0x0 "MB92_8B_CS,Message Buffer 92 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID92,Message Buffer 92 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x644++0x3 line.long 0x0 "MB20_64B_WORD7,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x644++0x3 line.long 0x0 "MB61_16B_WORD1,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x644++0x7 line.long 0x0 "MB92_8B_ID,Message Buffer 92 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD8,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB61_16B_WORD2,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB92_8B_WORD0,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x648++0x7 line.long 0x0 "WORD092,Message Buffer 92 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD9,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB61_16B_WORD3,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB92_8B_WORD1,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x7 line.long 0x0 "WORD192,Message Buffer 92 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS93,Message Buffer 93 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x3 line.long 0x0 "MB20_64B_WORD10,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x650++0x3 line.long 0x0 "MB62_16B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x7 line.long 0x0 "MB93_8B_CS,Message Buffer 93 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID93,Message Buffer 93 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x3 line.long 0x0 "MB20_64B_WORD11,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x654++0x3 line.long 0x0 "MB62_16B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x7 line.long 0x0 "MB93_8B_ID,Message Buffer 93 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD12,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB62_16B_WORD0,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB93_8B_WORD0,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x7 line.long 0x0 "WORD093,Message Buffer 93 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD13,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB62_16B_WORD1,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB93_8B_WORD1,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x7 line.long 0x0 "WORD193,Message Buffer 93 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS94,Message Buffer 94 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x660++0x3 line.long 0x0 "MB20_64B_WORD14,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x660++0x3 line.long 0x0 "MB62_16B_WORD2,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x660++0x7 line.long 0x0 "MB94_8B_CS,Message Buffer 94 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID94,Message Buffer 94 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x664++0x3 line.long 0x0 "MB20_64B_WORD15,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x664++0x3 line.long 0x0 "MB62_16B_WORD3,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x664++0x7 line.long 0x0 "MB94_8B_ID,Message Buffer 94 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB94_8B_WORD0,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x668++0x7 line.long 0x0 "WORD094,Message Buffer 94 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB94_8B_WORD1,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x66C++0x7 line.long 0x0 "WORD194,Message Buffer 94 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS95,Message Buffer 95 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x670++0x7 line.long 0x0 "MB95_8B_CS,Message Buffer 95 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID95,Message Buffer 95 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x674++0x7 line.long 0x0 "MB95_8B_ID,Message Buffer 95 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB95_8B_WORD0,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x678++0x7 line.long 0x0 "WORD095,Message Buffer 95 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB95_8B_WORD1,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x67C++0x3 line.long 0x0 "WORD195,Message Buffer 95 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "RXIMR[$1],Rx Individual Mask Registers" hexmask.long 0x0 0.--31. 1. "MI,Individual Mask Bits" repeat.end group.long 0xAE0++0xF line.long 0x0 "MECR,Memory Error Control Register" bitfld.long 0x0 31. "ECRWRDIS,Error Configuration Register Write Disable" "0: Write is enabled.,1: Write is disabled." bitfld.long 0x0 19. "HANCEI_MSK,Host Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 18. "FANCEI_MSK,FlexCAN Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." bitfld.long 0x0 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 15. "HAERRIE,Host Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." bitfld.long 0x0 14. "FAERRIE,FlexCAN Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." newline bitfld.long 0x0 13. "EXTERRIE,Extended Error Injection Enable" "0: Error injection is applied only to the 32-bit..,1: Error injection is applied to the 64-bit word." bitfld.long 0x0 9. "RERRDIS,Error Report Disable" "0: Enable updates of the error report registers.,1: Disable updates of the error report registers." newline bitfld.long 0x0 8. "ECCDIS,Error Correction Disable" "0: Enable memory error correction.,1: Disable memory error correction." bitfld.long 0x0 7. "NCEFAFRZ,Non-Correctable Errors In FlexCAN Access Put Device In Freeze Mode" "0: Keep normal operation.,1: Put FlexCAN in Freeze mode (see section 'Freeze.." line.long 0x4 "ERRIAR,Error Injection Address Register" hexmask.long.word 0x4 2.--13. 1. "INJADDR_H,Error Injection Address High" rbitfld.long 0x4 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3" line.long 0x8 "ERRIDPR,Error Injection Data Pattern Register" hexmask.long 0x8 0.--31. 1. "DFLIP,Data flip pattern" line.long 0xC "ERRIPPR,Error Injection Parity Pattern Register" hexmask.long.byte 0xC 24.--28. 1. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" hexmask.long.byte 0xC 16.--20. 1. "PFLIP2,Parity Flip Pattern For Byte 2" newline hexmask.long.byte 0xC 8.--12. 1. "PFLIP1,Parity Flip Pattern For Byte 1" hexmask.long.byte 0xC 0.--4. 1. "PFLIP0,Parity Flip Pattern For Byte 0 (Least Significant)" rgroup.long 0xAF0++0xB line.long 0x0 "RERRAR,Error Report Address Register" bitfld.long 0x0 24. "NCE,Non-Correctable Error" "0: Reporting a correctable error,1: Reporting a non-correctable error" bitfld.long 0x0 16.--18. "SAID,SAID" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 0.--13. 1. "ERRADDR,Address Where Error Detected" line.long 0x4 "RERRDR,Error Report Data Register" hexmask.long 0x4 0.--31. 1. "RDATA,Raw data word read from memory with error" line.long 0x8 "RERRSYNR,Error Report Syndrome Register" bitfld.long 0x8 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 24.--28. 1. "SYND3,Error Syndrome For Byte 3 (most significant)" newline bitfld.long 0x8 23. "BE2,Byte Enabled For Byte 2" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 16.--20. 1. "SYND2,Error Syndrome For Byte 2" newline bitfld.long 0x8 15. "BE1,Byte Enabled For Byte 1" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 8.--12. 1. "SYND1,Error Syndrome for Byte 1" newline bitfld.long 0x8 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 0.--4. 1. "SYND0,Error Syndrome For Byte 0 (least significant)" group.long 0xAFC++0x3 line.long 0x0 "ERRSR,Error Status Register" eventfld.long 0x0 19. "HANCEIF,Host Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in host..,1: A non-correctable error was detected in a host.." eventfld.long 0x0 18. "FANCEIF,FlexCAN Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in..,1: A non-correctable error was detected in a.." newline eventfld.long 0x0 16. "CEIF,Correctable Error Interrupt Flag" "0: No correctable errors were detected so far.,1: A correctable error was detected." eventfld.long 0x0 3. "HANCEIOF,Host Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in host..,1: Overrun on non-correctable errors in host access" newline eventfld.long 0x0 2. "FANCEIOF,FlexCAN Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in FlexCAN..,1: Overrun on non-correctable errors in FlexCAN.." eventfld.long 0x0 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0: No overrun on correctable errors,1: Overrun on correctable errors" group.long 0xBF0++0x17 line.long 0x0 "EPRS,Enhanced CAN Bit Timing Prescalers" hexmask.long.word 0x0 16.--25. 1. "EDPRESDIV,Extended Data Phase Prescaler Division Factor" hexmask.long.word 0x0 0.--9. 1. "ENPRESDIV,Extended Nominal Prescaler Division Factor" line.long 0x4 "ENCBT,Enhanced Nominal CAN Bit Timing" hexmask.long.byte 0x4 22.--28. 1. "NRJW,Nominal Resynchronization Jump Width" hexmask.long.byte 0x4 12.--18. 1. "NTSEG2,Nominal Time Segment 2" newline hexmask.long.byte 0x4 0.--7. 1. "NTSEG1,Nominal Time Segment 1" line.long 0x8 "EDCBT,Enhanced Data Phase CAN bit Timing" hexmask.long.byte 0x8 22.--25. 1. "DRJW,Data Phase Resynchronization Jump Width" hexmask.long.byte 0x8 12.--15. 1. "DTSEG2,Data Phase Time Segment 2" newline hexmask.long.byte 0x8 0.--4. 1. "DTSEG1,Data Phase Segment 1" line.long 0xC "ETDC,Enhanced Transceiver Delay Compensation" bitfld.long 0xC 31. "ETDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" bitfld.long 0xC 30. "TDMDIS,Transceiver Delay Measurement Disable" "0: TDC measurement is enabled,1: TDC measurement is disabled" newline hexmask.long.byte 0xC 16.--22. 1. "ETDCOFF,Enhanced Transceiver Delay Compensation Offset" eventfld.long 0xC 15. "ETDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0xC 0.--7. 1. "ETDCVAL,Enhanced Transceiver Delay Compensation Value" line.long 0x10 "FDCTRL,CAN FD Control Register" bitfld.long 0x10 31. "FDRATE,Bit Rate Switch Enable" "0: Transmit a frame in nominal rate. The BRS bit in..,1: Transmit a frame with bit rate switching if the.." bitfld.long 0x10 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." bitfld.long 0x10 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 15. "TDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" eventfld.long 0x10 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0x10 8.--12. 1. "TDCOFF,Transceiver Delay Compensation Offset" hexmask.long.byte 0x10 0.--5. 1. "TDCVAL,Transceiver Delay Compensation Value" line.long 0x14 "FDCBT,CAN FD Bit Timing Register" hexmask.long.word 0x14 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor" bitfld.long 0x14 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x14 10.--14. 1. "FPROPSEG,Fast Propagation Segment" bitfld.long 0x14 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7" rgroup.long 0xC08++0x3 line.long 0x0 "FDCRC,CAN FD CRC Register" hexmask.long.byte 0x0 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC" hexmask.long.tbyte 0x0 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value" group.long 0xC0C++0xB line.long 0x0 "ERFCR,Enhanced Rx FIFO Control Register" bitfld.long 0x0 31. "ERFEN,Enhanced Rx FIFO enable" "0: Enhanced Rx FIFO is disabled,1: Enhanced Rx FIFO is enabled" hexmask.long.byte 0x0 26.--30. 1. "DMALW,DMA Last Word" newline hexmask.long.byte 0x0 16.--22. 1. "NEXIF,Number of Extended ID Filter Elements" hexmask.long.byte 0x0 8.--13. 1. "NFE,Number of Enhanced Rx FIFO Filter Elements" newline hexmask.long.byte 0x0 0.--4. 1. "ERFWM,Enhanced Rx FIFO Watermark" line.long 0x4 "ERFIER,Enhanced Rx FIFO Interrupt Enable Register" bitfld.long 0x4 31. "ERFUFWIE,Enhanced Rx FIFO Underflow Interrupt Enable" "0: Enhanced Rx FIFO Underflow interrupt is disabled,1: Enhanced Rx FIFO Underflow interrupt is enabled" bitfld.long 0x4 30. "ERFOVFIE,Enhanced Rx FIFO Overflow Interrupt Enable" "0: Enhanced Rx FIFO Overflow is disabled,1: Enhanced Rx FIFO Overflow is enabled" newline bitfld.long 0x4 29. "ERFWMIIE,Enhanced Rx FIFO Watermark Indication Interrupt Enable" "0: Enhanced Rx FIFO Watermark interrupt is disabled,1: Enhanced Rx FIFO Watermark interrupt is enabled" bitfld.long 0x4 28. "ERFDAIE,Enhanced Rx FIFO Data Available Interrupt Enable" "0: Enhanced Rx FIFO Data Available interrupt is..,1: Enhanced Rx FIFO Data Available interrupt is.." line.long 0x8 "ERFSR,Enhanced Rx FIFO Status Register" eventfld.long 0x8 31. "ERFUFW,Enhanced Rx FIFO Underflow" "0: No such occurrence,1: Enhanced Rx FIFO underflow" eventfld.long 0x8 30. "ERFOVF,Enhanced Rx FIFO Overflow" "0: No such occurrence,1: Enhanced Rx FIFO overflow" newline eventfld.long 0x8 29. "ERFWMI,Enhanced Rx FIFO Watermark Indication" "0: No such occurrence,1: The number of messages in FIFO is greater than.." eventfld.long 0x8 28. "ERFDA,Enhanced Rx FIFO Data Available" "0: No such occurrence,1: There is at least one message stored in Enhanced.." newline bitfld.long 0x8 27. "ERFCLR,Enhanced Rx FIFO Clear" "0: No effect,1: Clear Enhanced Rx FIFO content" rbitfld.long 0x8 17. "ERFE,Enhanced Rx FIFO empty" "0: Enhanced Rx FIFO is not empty,1: Enhanced Rx FIFO is empty" newline rbitfld.long 0x8 16. "ERFF,Enhanced Rx FIFO full" "0: Enhanced Rx FIFO is not full,1: Enhanced Rx FIFO is full" hexmask.long.byte 0x8 0.--5. 1. "ERFEL,Enhanced Rx FIFO Elements" repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC30)++0x3 line.long 0x0 "HR_TIME_STAMP[$1],High Resolution Time Stamp" hexmask.long 0x0 0.--31. 1. "TS,High Resolution Time Stamp" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x3000)++0x3 line.long 0x0 "ERFFEL[$1],Enhanced Rx FIFO Filter Element" hexmask.long 0x0 0.--31. 1. "FEL,Filter Element Bits" repeat.end tree.end tree "CAN3" base ad:0x42600000 group.long 0x0++0xB line.long 0x0 "MCR,Module Configuration Register" bitfld.long 0x0 31. "MDIS,Module Disable" "0: Enable the FlexCAN module.,1: Disable the FlexCAN module." bitfld.long 0x0 30. "FRZ,Freeze Enable" "0: Not enabled to enter Freeze mode.,1: Enabled to enter Freeze mode." newline bitfld.long 0x0 29. "RFEN,Legacy Rx FIFO Enable" "0: Legacy Rx FIFO not enabled.,1: Legacy Rx FIFO enabled." bitfld.long 0x0 28. "HALT,Halt FlexCAN" "0: No Freeze mode request.,1: Enters Freeze mode if the FRZ bit is asserted." newline rbitfld.long 0x0 27. "NOTRDY,FlexCAN Not Ready" "0: FlexCAN module is either in Normal mode..,1: FlexCAN module is either in Disable mode Doze.." bitfld.long 0x0 26. "WAKMSK,Wake Up Interrupt Mask" "0: Wake Up interrupt is disabled.,1: Wake Up interrupt is enabled." newline bitfld.long 0x0 25. "SOFTRST,Soft Reset" "0: No reset request.,1: Resets the registers affected by soft reset." rbitfld.long 0x0 24. "FRZACK,Freeze Mode Acknowledge" "0: FlexCAN not in Freeze mode prescaler running.,1: FlexCAN in Freeze mode prescaler stopped." newline bitfld.long 0x0 23. "SUPV,Supervisor Mode" "0: FlexCAN is in User mode. Affected registers..,1: FlexCAN is in Supervisor mode. Affected.." bitfld.long 0x0 22. "SLFWAK,Self Wake Up" "0: FlexCAN Self Wake Up feature is disabled.,1: FlexCAN Self Wake Up feature is enabled." newline bitfld.long 0x0 21. "WRNEN,Warning Interrupt Enable" "0: TWRNINT and RWRNINT bits are zero independent of..,1: TWRNINT and RWRNINT bits are set when the.." rbitfld.long 0x0 20. "LPMACK,Low-Power Mode Acknowledge" "0: FlexCAN is not in a low-power mode.,1: FlexCAN is in a low-power mode." newline bitfld.long 0x0 19. "WAKSRC,Wake Up Source" "0: FlexCAN uses the unfiltered Rx input to detect..,1: FlexCAN uses the filtered Rx input to detect.." bitfld.long 0x0 18. "DOZE,Doze Mode Enable" "0: FlexCAN is not enabled to enter low-power mode..,1: FlexCAN is enabled to enter low-power mode when.." newline bitfld.long 0x0 17. "SRXDIS,Self Reception Disable" "0: Self-reception enabled.,1: Self-reception disabled." bitfld.long 0x0 16. "IRMQ,Individual Rx Masking And Queue Enable" "0: Individual Rx masking and queue feature are..,1: Individual Rx masking and queue feature are.." newline bitfld.long 0x0 15. "DMA,DMA Enable" "0: DMA feature for Legacy RX FIFO or Enhanced Rx..,1: DMA feature for Legacy RX FIFO or Enhanced Rx.." bitfld.long 0x0 13. "LPRIOEN,Local Priority Enable" "0: Local Priority disabled.,1: Local Priority enabled." newline bitfld.long 0x0 12. "AEN,Abort Enable" "0: Abort disabled.,1: Abort enabled." bitfld.long 0x0 11. "FDEN,CAN FD operation enable" "0: CAN FD is disabled. FlexCAN is able to receive..,1: CAN FD is enabled. FlexCAN is able to receive.." newline bitfld.long 0x0 8.--9. "IDAM,ID Acceptance Mode" "0: Format A: One full ID (standard and extended)..,1: Format B: Two full standard IDs or two partial..,2: Format C: Four partial 8-bit standard IDs per ID..,3: Format D: All frames rejected." hexmask.long.byte 0x0 0.--6. 1. "MAXMB,Number Of The Last Message Buffer" line.long 0x4 "CTRL1,Control 1 Register" hexmask.long.byte 0x4 24.--31. 1. "PRESDIV,Prescaler Division Factor" bitfld.long 0x4 22.--23. "RJW,Resync Jump Width" "0,1,2,3" newline bitfld.long 0x4 19.--21. "PSEG1,Phase Segment 1" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PSEG2,Phase Segment 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 15. "BOFFMSK,Bus Off Interrupt Mask" "0: Bus Off interrupt disabled.,1: Bus Off interrupt enabled." bitfld.long 0x4 14. "ERRMSK,Error Interrupt Mask" "0: Error interrupt disabled.,1: Error interrupt enabled." newline bitfld.long 0x4 13. "CLKSRC,CAN Engine Clock Source" "0: The CAN engine clock source is the oscillator..,1: The CAN engine clock source is the peripheral.." bitfld.long 0x4 12. "LPB,Loop Back Mode" "0: Loop Back disabled.,1: Loop Back enabled." newline bitfld.long 0x4 11. "TWRNMSK,Tx Warning Interrupt Mask" "0: Tx Warning interrupt disabled.,1: Tx Warning interrupt enabled." bitfld.long 0x4 10. "RWRNMSK,Rx Warning Interrupt Mask" "0: Rx Warning interrupt disabled.,1: Rx Warning interrupt enabled." newline bitfld.long 0x4 7. "SMP,CAN Bit Sampling" "0: Just one sample is used to determine the bit..,1: Three samples are used to determine the value of.." bitfld.long 0x4 6. "BOFFREC,Bus Off Recovery" "0: Automatic recovering from Bus Off state enabled.,1: Automatic recovering from Bus Off state disabled." newline bitfld.long 0x4 5. "TSYN,Timer Sync" "0: Timer sync feature disabled,1: Timer sync feature enabled" bitfld.long 0x4 4. "LBUF,Lowest Buffer Transmitted First" "0: Buffer with highest priority is transmitted first.,1: Lowest number buffer is transmitted first." newline bitfld.long 0x4 3. "LOM,Listen-Only Mode" "0: Listen-Only mode is deactivated.,1: FlexCAN module operates in Listen-Only mode." bitfld.long 0x4 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7" line.long 0x8 "TIMER,Free Running Timer" hexmask.long.word 0x8 0.--15. 1. "TIMER,Timer Value" group.long 0x10++0x27 line.long 0x0 "RXMGMASK,Rx Mailboxes Global Mask Register" hexmask.long 0x0 0.--31. 1. "MG,Rx Mailboxes Global Mask Bits" line.long 0x4 "RX14MASK,Rx 14 Mask Register" hexmask.long 0x4 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits" line.long 0x8 "RX15MASK,Rx 15 Mask Register" hexmask.long 0x8 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits" line.long 0xC "ECR,Error Counter" hexmask.long.byte 0xC 24.--31. 1. "RXERRCNT_FAST,Receive Error Counter for fast bits" hexmask.long.byte 0xC 16.--23. 1. "TXERRCNT_FAST,Transmit Error Counter for fast bits" newline hexmask.long.byte 0xC 8.--15. 1. "RXERRCNT,Receive Error Counter" hexmask.long.byte 0xC 0.--7. 1. "TXERRCNT,Transmit Error Counter" line.long 0x10 "ESR1,Error and Status 1 Register" rbitfld.long 0x10 31. "BIT1ERR_FAST,Bit1 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as recessive is received.." rbitfld.long 0x10 30. "BIT0ERR_FAST,Bit0 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." newline rbitfld.long 0x10 28. "CRCERR_FAST,Cyclic Redundancy Check Error in the CRC field of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 27. "FRMERR_FAST,Form Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A form error occurred since last read of this.." newline rbitfld.long 0x10 26. "STFERR_FAST,Stuffing Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A stuffing error occurred since last read of.." eventfld.long 0x10 21. "ERROVR,Error Overrun" "0: Overrun has not occurred.,1: Overrun has occurred." newline eventfld.long 0x10 20. "ERRINT_FAST,Error interrupt for errors detected in Data Phase of CAN FD frames with BRS bit set" "0: No such occurrence.,1: Indicates setting of any error bit detected in.." eventfld.long 0x10 19. "BOFFDONEINT,Bus Off Done Interrupt" "0: No such occurrence.,1: FlexCAN module has completed Bus Off process." newline rbitfld.long 0x10 18. "SYNCH,CAN Synchronization Status" "0: FlexCAN is not synchronized to the CAN bus.,1: FlexCAN is synchronized to the CAN bus." eventfld.long 0x10 17. "TWRNINT,Tx Warning Interrupt Flag" "0: No such occurrence.,1: The Tx error counter transitioned from less than.." newline eventfld.long 0x10 16. "RWRNINT,Rx Warning Interrupt Flag" "0: No such occurrence.,1: The Rx error counter transitioned from less than.." rbitfld.long 0x10 15. "BIT1ERR,Bit1 Error" "0: No such occurrence.,1: At least one bit sent as recessive is received.." newline rbitfld.long 0x10 14. "BIT0ERR,Bit0 Error" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." rbitfld.long 0x10 13. "ACKERR,Acknowledge Error" "0: No such occurrence.,1: An ACK error occurred since last read of this.." newline rbitfld.long 0x10 12. "CRCERR,Cyclic Redundancy Check Error" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 11. "FRMERR,Form Error" "0: No such occurrence.,1: A Form Error occurred since last read of this.." newline rbitfld.long 0x10 10. "STFERR,Stuffing Error" "0: No such occurrence.,1: A stuffing error occurred since last read of.." rbitfld.long 0x10 9. "TXWRN,TX Error Warning" "0: No such occurrence.,1: TXERRCNT is greater than or equal to 96." newline rbitfld.long 0x10 8. "RXWRN,Rx Error Warning" "0: No such occurrence.,1: RXERRCNT is greater than or equal to 96." rbitfld.long 0x10 7. "IDLE,IDLE" "0: No such occurrence.,1: CAN bus is now IDLE." newline rbitfld.long 0x10 6. "TX,FlexCAN In Transmission" "0: FlexCAN is not transmitting a message.,1: FlexCAN is transmitting a message." rbitfld.long 0x10 4.--5. "FLTCONF,Fault Confinement State" "0: Bus Off,1: Error Passive,2: Bus Off,3: Bus Off" newline rbitfld.long 0x10 3. "RX,FlexCAN In Reception" "0: FlexCAN is not receiving a message.,1: FlexCAN is receiving a message." eventfld.long 0x10 2. "BOFFINT,Bus Off Interrupt" "0: No such occurrence.,1: FlexCAN module entered Bus Off state." newline eventfld.long 0x10 1. "ERRINT,Error Interrupt" "0: No such occurrence.,1: Indicates setting of any error bit in the Error.." eventfld.long 0x10 0. "WAKINT,Wake-Up Interrupt" "0: No such occurrence.,1: Indicates a recessive to dominant transition was.." line.long 0x14 "IMASK2,Interrupt Masks 2 Register" hexmask.long 0x14 0.--31. 1. "BUF63TO32M,Buffer MBi Mask" line.long 0x18 "IMASK1,Interrupt Masks 1 Register" hexmask.long 0x18 0.--31. 1. "BUF31TO0M,Buffer MBi Mask" line.long 0x1C "IFLAG2,Interrupt Flags 2 Register" hexmask.long 0x1C 0.--31. 1. "BUF63TO32I,Buffer MBi Interrupt" line.long 0x20 "IFLAG1,Interrupt Flags 1 Register" hexmask.long.tbyte 0x20 8.--31. 1. "BUF31TO8I,Buffer MBi Interrupt" eventfld.long 0x20 7. "BUF7I,Buffer MB7 Interrupt Or Legacy Rx FIFO Overflow" "0: No occurrence of MB7 completing..,1: MB7 completed transmission/reception when.." newline eventfld.long 0x20 6. "BUF6I,Buffer MB6 Interrupt Or Legacy Rx FIFO Warning" "0: No occurrence of MB6 completing..,1: MB6 completed transmission/reception when.." eventfld.long 0x20 5. "BUF5I,Buffer MB5 Interrupt Or Frames available in Legacy Rx FIFO" "0: No occurrence of MB5 completing..,1: MB5 completed transmission/reception when.." newline hexmask.long.byte 0x20 1.--4. 1. "BUF4TO1I,Buffer MBi Interrupt Or Reserved" eventfld.long 0x20 0. "BUF0I,Buffer MB0 Interrupt Or Clear Legacy FIFO bit" "0: The corresponding buffer has no occurrence of..,1: The corresponding buffer has successfully.." line.long 0x24 "CTRL2,Control 2 Register" bitfld.long 0x24 31. "ERRMSK_FAST,Error Interrupt Mask for errors detected in the data phase of fast CAN FD frames" "0: ERRINT_FAST error interrupt disabled.,1: ERRINT_FAST error interrupt enabled." bitfld.long 0x24 30. "BOFFDONEMSK,Bus Off Done Interrupt Mask" "0: Bus off done interrupt disabled.,1: Bus off done interrupt enabled." newline bitfld.long 0x24 29. "ECRWRE,Error-correction Configuration Register Write Enable" "0: Disable update.,1: Enable update." bitfld.long 0x24 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0: Maintain the write access restrictions.,1: Enable unrestricted write access to FlexCAN.." newline hexmask.long.byte 0x24 24.--27. 1. "RFFN,Number Of Legacy Rx FIFO Filters" hexmask.long.byte 0x24 19.--23. 1. "TASD,Tx Arbitration Start Delay" newline bitfld.long 0x24 18. "MRP,Mailboxes Reception Priority" "0: Matching starts from Legacy Rx FIFO or Enhanced..,1: Matching starts from mailboxes and continues on.." bitfld.long 0x24 17. "RRS,Remote Request Storing" "0: Remote response frame is generated.,1: Remote request frame is stored." newline bitfld.long 0x24 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0: Rx mailbox filter's IDE bit is always compared..,1: Enables the comparison of both Rx mailbox.." bitfld.long 0x24 15. "TIMER_SRC,Timer Source" "0: The free running timer is clocked by the CAN bit..,1: The free running timer is clocked by an external.." newline bitfld.long 0x24 14. "PREXCEN,Protocol Exception Enable" "0: Protocol exception is disabled.,1: Protocol exception is enabled." bitfld.long 0x24 13. "BTE,Bit Timing Expansion enable" "0: CAN Bit timing expansion is disabled.,1: CAN bit timing expansion is enabled." newline bitfld.long 0x24 12. "ISOCANFDEN,ISO CAN FD Enable" "0: FlexCAN operates using the non-ISO CAN FD..,1: FlexCAN operates using the ISO CAN FD protocol.." bitfld.long 0x24 11. "EDFLTDIS,Edge Filter Disable" "0: Edge filter is enabled,1: Edge filter is disabled" newline bitfld.long 0x24 8.--9. "MBTSBASE,Message Buffer Time Stamp Base" "0: Message buffer time stamp base is TIMER,1: Message buffer time stamp base is lower 16 bits..,2: Message buffer time stamp base is upper 16 bits..,?" bitfld.long 0x24 6.--7. "TSTAMPCAP,Time Stamp Capture Point" "0: The high resolution time stamp capture is disabled,1: The high resolution time stamp is captured in..,2: The high resolution time stamp is captured in..,3: The high resolution time stamp is captured in.." rgroup.long 0x38++0x3 line.long 0x0 "ESR2,Error and Status 2 Register" hexmask.long.byte 0x0 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox" bitfld.long 0x0 14. "VPS,Valid Priority Status" "0: Contents of IMB and LPTM are invalid.,1: Contents of IMB and LPTM are valid." newline bitfld.long 0x0 13. "IMB,Inactive Mailbox" "0: If ESR2[VPS] is asserted the ESR2[LPTM] is not..,1: If ESR2[VPS] is asserted there is at least one.." rgroup.long 0x44++0x3 line.long 0x0 "CRCR,CRC Register" hexmask.long.byte 0x0 16.--22. 1. "MBCRC,CRC Mailbox" hexmask.long.word 0x0 0.--14. 1. "TXCRC,Transmitted CRC value" group.long 0x48++0x3 line.long 0x0 "RXFGMASK,Legacy Rx FIFO Global Mask Register" hexmask.long 0x0 0.--31. 1. "FGM,Legacy Rx FIFO Global Mask Bits" rgroup.long 0x4C++0x3 line.long 0x0 "RXFIR,Legacy Rx FIFO Information Register" hexmask.long.word 0x0 0.--8. 1. "IDHIT,Identifier Acceptance Filter Hit Indicator" group.long 0x50++0x3 line.long 0x0 "CBT,CAN Bit Timing Register" bitfld.long 0x0 31. "BTF,Bit Timing Format Enable" "0: Extended bit time definitions disabled.,1: Extended bit time definitions enabled." hexmask.long.word 0x0 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor" newline hexmask.long.byte 0x0 16.--20. 1. "ERJW,Extended Resync Jump Width" hexmask.long.byte 0x0 10.--15. 1. "EPROPSEG,Extended Propagation Segment" newline hexmask.long.byte 0x0 5.--9. 1. "EPSEG1,Extended Phase Segment 1" hexmask.long.byte 0x0 0.--4. 1. "EPSEG2,Extended Phase Segment 2" group.long 0x6C++0x3 line.long 0x0 "IMASK3,Interrupt Masks 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64M,Buffer MBi Mask" group.long 0x74++0x3 line.long 0x0 "IFLAG3,Interrupt Flags 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64,Buffer MBi Interrupt" group.long 0x80++0x3 line.long 0x0 "CS0,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_16B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_32B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_64B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x7 line.long 0x0 "MB0_8B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID0,Message Buffer 0 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_16B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_32B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_64B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x7 line.long 0x0 "MB0_8B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_16B_WORD0,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_32B_WORD0,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_64B_WORD0,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_8B_WORD0,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x7 line.long 0x0 "WORD00,Message Buffer 0 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_16B_WORD1,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_32B_WORD1,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_64B_WORD1,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_8B_WORD1,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x7 line.long 0x0 "WORD10,Message Buffer 0 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS1,Message Buffer 1 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x90++0x3 line.long 0x0 "MB0_16B_WORD2,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_32B_WORD2,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_64B_WORD2,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x7 line.long 0x0 "MB1_8B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID1,Message Buffer 1 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x94++0x3 line.long 0x0 "MB0_16B_WORD3,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_32B_WORD3,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_64B_WORD3,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x7 line.long 0x0 "MB1_8B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_32B_WORD4,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB0_64B_WORD4,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB1_16B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x98++0x3 line.long 0x0 "MB1_8B_WORD0,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x98++0x7 line.long 0x0 "WORD01,Message Buffer 1 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_32B_WORD5,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB0_64B_WORD5,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB1_16B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x9C++0x3 line.long 0x0 "MB1_8B_WORD1,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x7 line.long 0x0 "WORD11,Message Buffer 1 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS2,Message Buffer 2 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA0++0x3 line.long 0x0 "MB0_32B_WORD6,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB0_64B_WORD6,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB1_16B_WORD0,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x7 line.long 0x0 "MB2_8B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID2,Message Buffer 2 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xA4++0x3 line.long 0x0 "MB0_32B_WORD7,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB0_64B_WORD7,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB1_16B_WORD1,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x7 line.long 0x0 "MB2_8B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD8,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_16B_WORD2,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_32B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA8++0x3 line.long 0x0 "MB2_8B_WORD0,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x7 line.long 0x0 "WORD02,Message Buffer 2 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD9,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_16B_WORD3,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_32B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xAC++0x3 line.long 0x0 "MB2_8B_WORD1,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x7 line.long 0x0 "WORD12,Message Buffer 2 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS3,Message Buffer 3 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x3 line.long 0x0 "MB0_64B_WORD10,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB1_32B_WORD0,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB2_16B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x7 line.long 0x0 "MB3_8B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID3,Message Buffer 3 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x3 line.long 0x0 "MB0_64B_WORD11,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB1_32B_WORD1,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB2_16B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x7 line.long 0x0 "MB3_8B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD12,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB1_32B_WORD2,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB2_16B_WORD0,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB3_8B_WORD0,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x7 line.long 0x0 "WORD03,Message Buffer 3 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD13,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB1_32B_WORD3,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB2_16B_WORD1,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB3_8B_WORD1,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x7 line.long 0x0 "WORD13,Message Buffer 3 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS4,Message Buffer 4 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC0++0x3 line.long 0x0 "MB0_64B_WORD14,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB1_32B_WORD4,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB2_16B_WORD2,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x7 line.long 0x0 "MB4_8B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID4,Message Buffer 4 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xC4++0x3 line.long 0x0 "MB0_64B_WORD15,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB1_32B_WORD5,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB2_16B_WORD3,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x7 line.long 0x0 "MB4_8B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_32B_WORD6,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x3 line.long 0x0 "MB1_64B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB3_16B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB4_8B_WORD0,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x7 line.long 0x0 "WORD04,Message Buffer 4 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_32B_WORD7,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x3 line.long 0x0 "MB1_64B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB3_16B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB4_8B_WORD1,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x7 line.long 0x0 "WORD14,Message Buffer 4 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS5,Message Buffer 5 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB1_64B_WORD0,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x3 line.long 0x0 "MB2_32B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB3_16B_WORD0,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x7 line.long 0x0 "MB5_8B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID5,Message Buffer 5 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB1_64B_WORD1,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x3 line.long 0x0 "MB2_32B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB3_16B_WORD1,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x7 line.long 0x0 "MB5_8B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD2,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB2_32B_WORD0,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB3_16B_WORD2,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB5_8B_WORD0,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x7 line.long 0x0 "WORD05,Message Buffer 5 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD3,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB2_32B_WORD1,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB3_16B_WORD3,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB5_8B_WORD1,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x7 line.long 0x0 "WORD15,Message Buffer 5 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS6,Message Buffer 6 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x3 line.long 0x0 "MB1_64B_WORD4,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB2_32B_WORD2,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB4_16B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x7 line.long 0x0 "MB6_8B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID6,Message Buffer 6 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x3 line.long 0x0 "MB1_64B_WORD5,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB2_32B_WORD3,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB4_16B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x7 line.long 0x0 "MB6_8B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD6,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB2_32B_WORD4,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB4_16B_WORD0,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB6_8B_WORD0,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x7 line.long 0x0 "WORD06,Message Buffer 6 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD7,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB2_32B_WORD5,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB4_16B_WORD1,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB6_8B_WORD1,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x7 line.long 0x0 "WORD16,Message Buffer 6 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS7,Message Buffer 7 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF0++0x3 line.long 0x0 "MB1_64B_WORD8,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB2_32B_WORD6,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB4_16B_WORD2,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x7 line.long 0x0 "MB7_8B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID7,Message Buffer 7 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xF4++0x3 line.long 0x0 "MB1_64B_WORD9,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB2_32B_WORD7,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB4_16B_WORD3,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x7 line.long 0x0 "MB7_8B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD10,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x3 line.long 0x0 "MB3_32B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB5_16B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB7_8B_WORD0,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x7 line.long 0x0 "WORD07,Message Buffer 7 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD11,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x3 line.long 0x0 "MB3_32B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB5_16B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB7_8B_WORD1,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x7 line.long 0x0 "WORD17,Message Buffer 7 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS8,Message Buffer 8 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x100++0x3 line.long 0x0 "MB1_64B_WORD12,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB3_32B_WORD0,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB5_16B_WORD0,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x7 line.long 0x0 "MB8_8B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID8,Message Buffer 8 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x104++0x3 line.long 0x0 "MB1_64B_WORD13,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB3_32B_WORD1,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB5_16B_WORD1,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x7 line.long 0x0 "MB8_8B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD14,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB3_32B_WORD2,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB5_16B_WORD2,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB8_8B_WORD0,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x108++0x7 line.long 0x0 "WORD08,Message Buffer 8 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD15,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB3_32B_WORD3,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB5_16B_WORD3,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB8_8B_WORD1,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x7 line.long 0x0 "WORD18,Message Buffer 8 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS9,Message Buffer 9 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB2_64B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB3_32B_WORD4,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x110++0x3 line.long 0x0 "MB6_16B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x7 line.long 0x0 "MB9_8B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID9,Message Buffer 9 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB2_64B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB3_32B_WORD5,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x114++0x3 line.long 0x0 "MB6_16B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x7 line.long 0x0 "MB9_8B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB2_64B_WORD0,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB3_32B_WORD6,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB6_16B_WORD0,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB9_8B_WORD0,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x7 line.long 0x0 "WORD09,Message Buffer 9 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB2_64B_WORD1,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB3_32B_WORD7,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB6_16B_WORD1,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB9_8B_WORD1,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x7 line.long 0x0 "WORD19,Message Buffer 9 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS10,Message Buffer 10 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB10_8B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB2_64B_WORD2,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x120++0x3 line.long 0x0 "MB4_32B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x7 line.long 0x0 "MB6_16B_WORD2,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID10,Message Buffer 10 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB10_8B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB2_64B_WORD3,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x124++0x3 line.long 0x0 "MB4_32B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x7 line.long 0x0 "MB6_16B_WORD3,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD0,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB2_64B_WORD4,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB4_32B_WORD0,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB7_16B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x128++0x7 line.long 0x0 "WORD010,Message Buffer 10 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD1,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB2_64B_WORD5,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB4_32B_WORD1,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB7_16B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x12C++0x7 line.long 0x0 "WORD110,Message Buffer 10 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS11,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB11_8B_CS,Message Buffer 11 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB2_64B_WORD6,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x130++0x3 line.long 0x0 "MB4_32B_WORD2,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x130++0x7 line.long 0x0 "MB7_16B_WORD0,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID11,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB11_8B_ID,Message Buffer 11 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB2_64B_WORD7,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x134++0x3 line.long 0x0 "MB4_32B_WORD3,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x134++0x7 line.long 0x0 "MB7_16B_WORD1,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD0,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB2_64B_WORD8,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB4_32B_WORD4,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB7_16B_WORD2,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x138++0x7 line.long 0x0 "WORD011,Message Buffer 11 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD1,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB2_64B_WORD9,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB4_32B_WORD5,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB7_16B_WORD3,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x7 line.long 0x0 "WORD111,Message Buffer 11 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS12,Message Buffer 12 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB12_8B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB2_64B_WORD10,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x140++0x3 line.long 0x0 "MB4_32B_WORD6,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x140++0x7 line.long 0x0 "MB8_16B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID12,Message Buffer 12 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB12_8B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB2_64B_WORD11,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x144++0x3 line.long 0x0 "MB4_32B_WORD7,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x144++0x7 line.long 0x0 "MB8_16B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_8B_WORD0,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB2_64B_WORD12,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB5_32B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x148++0x3 line.long 0x0 "MB8_16B_WORD0,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x7 line.long 0x0 "WORD012,Message Buffer 12 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_8B_WORD1,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB2_64B_WORD13,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB5_32B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x14C++0x3 line.long 0x0 "MB8_16B_WORD1,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x7 line.long 0x0 "WORD112,Message Buffer 12 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS13,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB13_8B_CS,Message Buffer 13 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB2_64B_WORD14,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x150++0x3 line.long 0x0 "MB5_32B_WORD0,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x150++0x7 line.long 0x0 "MB8_16B_WORD2,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID13,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB13_8B_ID,Message Buffer 13 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB2_64B_WORD15,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x154++0x3 line.long 0x0 "MB5_32B_WORD1,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x154++0x7 line.long 0x0 "MB8_16B_WORD3,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD0,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB3_64B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x3 line.long 0x0 "MB5_32B_WORD2,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB9_16B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x7 line.long 0x0 "WORD013,Message Buffer 13 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD1,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB3_64B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x3 line.long 0x0 "MB5_32B_WORD3,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB9_16B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x7 line.long 0x0 "WORD113,Message Buffer 13 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS14,Message Buffer 14 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB14_8B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB3_64B_WORD0,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x160++0x3 line.long 0x0 "MB5_32B_WORD4,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x160++0x7 line.long 0x0 "MB9_16B_WORD0,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID14,Message Buffer 14 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB14_8B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB3_64B_WORD1,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x164++0x3 line.long 0x0 "MB5_32B_WORD5,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x164++0x7 line.long 0x0 "MB9_16B_WORD1,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD0,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB3_64B_WORD2,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB5_32B_WORD6,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB9_16B_WORD2,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x7 line.long 0x0 "WORD014,Message Buffer 14 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD1,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB3_64B_WORD3,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB5_32B_WORD7,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB9_16B_WORD3,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x7 line.long 0x0 "WORD114,Message Buffer 14 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS15,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB10_16B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB15_8B_CS,Message Buffer 15 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB3_64B_WORD4,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x170++0x7 line.long 0x0 "MB6_32B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID15,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB10_16B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB15_8B_ID,Message Buffer 15 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB3_64B_WORD5,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x174++0x7 line.long 0x0 "MB6_32B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_16B_WORD0,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB15_8B_WORD0,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB3_64B_WORD6,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB6_32B_WORD0,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x7 line.long 0x0 "WORD015,Message Buffer 15 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_16B_WORD1,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB15_8B_WORD1,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB3_64B_WORD7,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB6_32B_WORD1,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x7 line.long 0x0 "WORD115,Message Buffer 15 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS16,Message Buffer 16 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB10_16B_WORD2,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x180++0x3 line.long 0x0 "MB16_8B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB3_64B_WORD8,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x180++0x7 line.long 0x0 "MB6_32B_WORD2,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID16,Message Buffer 16 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB10_16B_WORD3,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x184++0x3 line.long 0x0 "MB16_8B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB3_64B_WORD9,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x184++0x7 line.long 0x0 "MB6_32B_WORD3,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x188++0x3 line.long 0x0 "MB16_8B_WORD0,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB3_64B_WORD10,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB6_32B_WORD4,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x188++0x7 line.long 0x0 "WORD016,Message Buffer 16 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x18C++0x3 line.long 0x0 "MB16_8B_WORD1,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB3_64B_WORD11,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB6_32B_WORD5,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x7 line.long 0x0 "WORD116,Message Buffer 16 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS17,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB11_16B_WORD0,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x190++0x3 line.long 0x0 "MB17_8B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB3_64B_WORD12,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x190++0x7 line.long 0x0 "MB6_32B_WORD6,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID17,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB11_16B_WORD1,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x194++0x3 line.long 0x0 "MB17_8B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB3_64B_WORD13,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x194++0x7 line.long 0x0 "MB6_32B_WORD7,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD2,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB17_8B_WORD0,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB3_64B_WORD14,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB7_32B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x198++0x7 line.long 0x0 "WORD017,Message Buffer 17 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD3,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB17_8B_WORD1,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB3_64B_WORD15,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB7_32B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x19C++0x7 line.long 0x0 "WORD117,Message Buffer 17 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS18,Message Buffer 18 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB12_16B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB18_8B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB4_64B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x7 line.long 0x0 "MB7_32B_WORD0,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID18,Message Buffer 18 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB12_16B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB18_8B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB4_64B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x7 line.long 0x0 "MB7_32B_WORD1,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD0,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB18_8B_WORD0,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB4_64B_WORD0,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB7_32B_WORD2,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x7 line.long 0x0 "WORD018,Message Buffer 18 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD1,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB18_8B_WORD1,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB4_64B_WORD1,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB7_32B_WORD3,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x7 line.long 0x0 "WORD118,Message Buffer 18 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS19,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB12_16B_WORD2,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x3 line.long 0x0 "MB19_8B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB4_64B_WORD2,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x7 line.long 0x0 "MB7_32B_WORD4,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID19,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB12_16B_WORD3,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x3 line.long 0x0 "MB19_8B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB4_64B_WORD3,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x7 line.long 0x0 "MB7_32B_WORD5,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B8++0x3 line.long 0x0 "MB19_8B_WORD0,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB4_64B_WORD4,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB7_32B_WORD6,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x7 line.long 0x0 "WORD019,Message Buffer 19 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1BC++0x3 line.long 0x0 "MB19_8B_WORD1,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB4_64B_WORD5,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB7_32B_WORD7,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x7 line.long 0x0 "WORD119,Message Buffer 19 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS20,Message Buffer 20 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB13_16B_WORD0,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x3 line.long 0x0 "MB20_8B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB4_64B_WORD6,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x7 line.long 0x0 "MB8_32B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID20,Message Buffer 20 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB13_16B_WORD1,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x3 line.long 0x0 "MB20_8B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB4_64B_WORD7,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x7 line.long 0x0 "MB8_32B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_16B_WORD2,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB20_8B_WORD0,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB4_64B_WORD8,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB8_32B_WORD0,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x7 line.long 0x0 "WORD020,Message Buffer 20 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_WORD3,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB20_8B_WORD1,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB4_64B_WORD9,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB8_32B_WORD1,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x7 line.long 0x0 "WORD120,Message Buffer 20 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS21,Message Buffer 21 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB14_16B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB21_8B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB4_64B_WORD10,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x1D0++0x7 line.long 0x0 "MB8_32B_WORD2,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID21,Message Buffer 21 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB14_16B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB21_8B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB4_64B_WORD11,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x1D4++0x7 line.long 0x0 "MB8_32B_WORD3,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD0,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB21_8B_WORD0,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB4_64B_WORD12,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB8_32B_WORD4,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x7 line.long 0x0 "WORD021,Message Buffer 21 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD1,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB21_8B_WORD1,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB4_64B_WORD13,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB8_32B_WORD5,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x7 line.long 0x0 "WORD121,Message Buffer 21 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS22,Message Buffer 22 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB14_16B_WORD2,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x3 line.long 0x0 "MB22_8B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB4_64B_WORD14,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x7 line.long 0x0 "MB8_32B_WORD6,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID22,Message Buffer 22 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB14_16B_WORD3,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x3 line.long 0x0 "MB22_8B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB4_64B_WORD15,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x7 line.long 0x0 "MB8_32B_WORD7,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB22_8B_WORD0,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1E8++0x3 line.long 0x0 "MB5_64B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB9_32B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x7 line.long 0x0 "WORD022,Message Buffer 22 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB22_8B_WORD1,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1EC++0x3 line.long 0x0 "MB5_64B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB9_32B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x7 line.long 0x0 "WORD122,Message Buffer 22 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS23,Message Buffer 23 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB15_16B_WORD0,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x3 line.long 0x0 "MB23_8B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB5_64B_WORD0,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x7 line.long 0x0 "MB9_32B_WORD0,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID23,Message Buffer 23 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB15_16B_WORD1,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x3 line.long 0x0 "MB23_8B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB5_64B_WORD1,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x7 line.long 0x0 "MB9_32B_WORD1,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD2,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB23_8B_WORD0,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB5_64B_WORD2,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB9_32B_WORD2,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x7 line.long 0x0 "WORD023,Message Buffer 23 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD3,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB23_8B_WORD1,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB5_64B_WORD3,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB9_32B_WORD3,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x7 line.long 0x0 "WORD123,Message Buffer 23 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS24,Message Buffer 24 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB16_16B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB24_8B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB5_64B_WORD4,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x200++0x7 line.long 0x0 "MB9_32B_WORD4,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID24,Message Buffer 24 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB16_16B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB24_8B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB5_64B_WORD5,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x204++0x7 line.long 0x0 "MB9_32B_WORD5,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD0,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB24_8B_WORD0,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB5_64B_WORD6,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB9_32B_WORD6,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x7 line.long 0x0 "WORD024,Message Buffer 24 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD1,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB24_8B_WORD1,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB5_64B_WORD7,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB9_32B_WORD7,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x7 line.long 0x0 "WORD124,Message Buffer 24 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS25,Message Buffer 25 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB10_32B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB16_16B_WORD2,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x210++0x3 line.long 0x0 "MB25_8B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x7 line.long 0x0 "MB5_64B_WORD8,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID25,Message Buffer 25 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB10_32B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB16_16B_WORD3,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x214++0x3 line.long 0x0 "MB25_8B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x7 line.long 0x0 "MB5_64B_WORD9,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD0,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB17_16B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x218++0x3 line.long 0x0 "MB25_8B_WORD0,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB5_64B_WORD10,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x218++0x7 line.long 0x0 "WORD025,Message Buffer 25 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD1,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB17_16B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x21C++0x3 line.long 0x0 "MB25_8B_WORD1,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB5_64B_WORD11,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x7 line.long 0x0 "WORD125,Message Buffer 25 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS26,Message Buffer 26 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x3 line.long 0x0 "MB10_32B_WORD2,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB17_16B_WORD0,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB26_8B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x7 line.long 0x0 "MB5_64B_WORD12,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID26,Message Buffer 26 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x3 line.long 0x0 "MB10_32B_WORD3,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB17_16B_WORD1,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB26_8B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x7 line.long 0x0 "MB5_64B_WORD13,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD4,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB17_16B_WORD2,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB26_8B_WORD0,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB5_64B_WORD14,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x228++0x7 line.long 0x0 "WORD026,Message Buffer 26 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD5,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB17_16B_WORD3,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB26_8B_WORD1,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB5_64B_WORD15,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x7 line.long 0x0 "WORD126,Message Buffer 26 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS27,Message Buffer 27 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB10_32B_WORD6,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x230++0x3 line.long 0x0 "MB18_16B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB27_8B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x7 line.long 0x0 "MB6_64B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID27,Message Buffer 27 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB10_32B_WORD7,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x234++0x3 line.long 0x0 "MB18_16B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB27_8B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x7 line.long 0x0 "MB6_64B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_32B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x238++0x3 line.long 0x0 "MB18_16B_WORD0,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB27_8B_WORD0,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB6_64B_WORD0,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x7 line.long 0x0 "WORD027,Message Buffer 27 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x23C++0x3 line.long 0x0 "MB18_16B_WORD1,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB27_8B_WORD1,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB6_64B_WORD1,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x7 line.long 0x0 "WORD127,Message Buffer 27 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS28,Message Buffer 28 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x3 line.long 0x0 "MB11_32B_WORD0,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB18_16B_WORD2,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB28_8B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x7 line.long 0x0 "MB6_64B_WORD2,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID28,Message Buffer 28 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x3 line.long 0x0 "MB11_32B_WORD1,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB18_16B_WORD3,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB28_8B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x7 line.long 0x0 "MB6_64B_WORD3,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD2,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB19_16B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x248++0x3 line.long 0x0 "MB28_8B_WORD0,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB6_64B_WORD4,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x248++0x7 line.long 0x0 "WORD028,Message Buffer 28 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD3,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB19_16B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x24C++0x3 line.long 0x0 "MB28_8B_WORD1,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB6_64B_WORD5,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x7 line.long 0x0 "WORD128,Message Buffer 28 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS29,Message Buffer 29 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x3 line.long 0x0 "MB11_32B_WORD4,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB19_16B_WORD0,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB29_8B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x7 line.long 0x0 "MB6_64B_WORD6,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID29,Message Buffer 29 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x3 line.long 0x0 "MB11_32B_WORD5,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB19_16B_WORD1,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB29_8B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x7 line.long 0x0 "MB6_64B_WORD7,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD6,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB19_16B_WORD2,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB29_8B_WORD0,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB6_64B_WORD8,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x258++0x7 line.long 0x0 "WORD029,Message Buffer 29 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD7,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB19_16B_WORD3,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB29_8B_WORD1,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB6_64B_WORD9,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x7 line.long 0x0 "WORD129,Message Buffer 29 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS30,Message Buffer 30 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB12_32B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB20_16B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB30_8B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x7 line.long 0x0 "MB6_64B_WORD10,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID30,Message Buffer 30 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB12_32B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB20_16B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB30_8B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x7 line.long 0x0 "MB6_64B_WORD11,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD0,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB20_16B_WORD0,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB30_8B_WORD0,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB6_64B_WORD12,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x268++0x7 line.long 0x0 "WORD030,Message Buffer 30 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD1,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB20_16B_WORD1,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB30_8B_WORD1,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB6_64B_WORD13,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x7 line.long 0x0 "WORD130,Message Buffer 30 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS31,Message Buffer 31 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x3 line.long 0x0 "MB12_32B_WORD2,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB20_16B_WORD2,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB31_8B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x7 line.long 0x0 "MB6_64B_WORD14,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID31,Message Buffer 31 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x3 line.long 0x0 "MB12_32B_WORD3,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB20_16B_WORD3,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB31_8B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x7 line.long 0x0 "MB6_64B_WORD15,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD4,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB21_16B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x3 line.long 0x0 "MB31_8B_WORD0,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB7_64B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x7 line.long 0x0 "WORD031,Message Buffer 31 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD5,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB21_16B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x3 line.long 0x0 "MB31_8B_WORD1,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB7_64B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x7 line.long 0x0 "WORD131,Message Buffer 31 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS32,Message Buffer 32 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x3 line.long 0x0 "MB12_32B_WORD6,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB21_16B_WORD0,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB32_8B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x7 line.long 0x0 "MB7_64B_WORD0,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID32,Message Buffer 32 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x3 line.long 0x0 "MB12_32B_WORD7,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB21_16B_WORD1,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB32_8B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x7 line.long 0x0 "MB7_64B_WORD1,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x288++0x3 line.long 0x0 "MB21_16B_WORD2,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB32_8B_WORD0,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB7_64B_WORD2,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x7 line.long 0x0 "WORD032,Message Buffer 32 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x28C++0x3 line.long 0x0 "MB21_16B_WORD3,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB32_8B_WORD1,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB7_64B_WORD3,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x7 line.long 0x0 "WORD132,Message Buffer 32 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS33,Message Buffer 33 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB13_32B_WORD0,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x290++0x3 line.long 0x0 "MB22_16B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB33_8B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x7 line.long 0x0 "MB7_64B_WORD4,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID33,Message Buffer 33 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB13_32B_WORD1,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x294++0x3 line.long 0x0 "MB22_16B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB33_8B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x7 line.long 0x0 "MB7_64B_WORD5,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD2,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB22_16B_WORD0,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB33_8B_WORD0,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB7_64B_WORD6,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x298++0x7 line.long 0x0 "WORD033,Message Buffer 33 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD3,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB22_16B_WORD1,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB33_8B_WORD1,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB7_64B_WORD7,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x7 line.long 0x0 "WORD133,Message Buffer 33 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS34,Message Buffer 34 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x3 line.long 0x0 "MB13_32B_WORD4,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB22_16B_WORD2,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB34_8B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x7 line.long 0x0 "MB7_64B_WORD8,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID34,Message Buffer 34 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x3 line.long 0x0 "MB13_32B_WORD5,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB22_16B_WORD3,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB34_8B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x7 line.long 0x0 "MB7_64B_WORD9,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD6,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB23_16B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A8++0x3 line.long 0x0 "MB34_8B_WORD0,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB7_64B_WORD10,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x7 line.long 0x0 "WORD034,Message Buffer 34 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD7,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB23_16B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2AC++0x3 line.long 0x0 "MB34_8B_WORD1,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB7_64B_WORD11,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x7 line.long 0x0 "WORD134,Message Buffer 34 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS35,Message Buffer 35 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB14_32B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB23_16B_WORD0,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B0++0x3 line.long 0x0 "MB35_8B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x7 line.long 0x0 "MB7_64B_WORD12,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID35,Message Buffer 35 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB14_32B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB23_16B_WORD1,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2B4++0x3 line.long 0x0 "MB35_8B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x7 line.long 0x0 "MB7_64B_WORD13,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD0,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB23_16B_WORD2,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB35_8B_WORD0,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB7_64B_WORD14,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x7 line.long 0x0 "WORD035,Message Buffer 35 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD1,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB23_16B_WORD3,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB35_8B_WORD1,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB7_64B_WORD15,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x7 line.long 0x0 "WORD135,Message Buffer 35 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS36,Message Buffer 36 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB14_32B_WORD2,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2C0++0x3 line.long 0x0 "MB24_16B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB36_8B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x7 line.long 0x0 "MB8_64B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID36,Message Buffer 36 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB14_32B_WORD3,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2C4++0x3 line.long 0x0 "MB24_16B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB36_8B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x7 line.long 0x0 "MB8_64B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_32B_WORD4,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB24_16B_WORD0,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB36_8B_WORD0,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB8_64B_WORD0,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x7 line.long 0x0 "WORD036,Message Buffer 36 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD5,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB24_16B_WORD1,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB36_8B_WORD1,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB8_64B_WORD1,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x7 line.long 0x0 "WORD136,Message Buffer 36 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS37,Message Buffer 37 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x3 line.long 0x0 "MB14_32B_WORD6,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB24_16B_WORD2,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB37_8B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x7 line.long 0x0 "MB8_64B_WORD2,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID37,Message Buffer 37 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x3 line.long 0x0 "MB14_32B_WORD7,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB24_16B_WORD3,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB37_8B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x7 line.long 0x0 "MB8_64B_WORD3,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB25_16B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB37_8B_WORD0,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x3 line.long 0x0 "MB8_64B_WORD4,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x7 line.long 0x0 "WORD037,Message Buffer 37 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB25_16B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB37_8B_WORD1,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x3 line.long 0x0 "MB8_64B_WORD5,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x7 line.long 0x0 "WORD137,Message Buffer 37 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS38,Message Buffer 38 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x3 line.long 0x0 "MB15_32B_WORD0,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB25_16B_WORD0,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB38_8B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x7 line.long 0x0 "MB8_64B_WORD6,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID38,Message Buffer 38 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x3 line.long 0x0 "MB15_32B_WORD1,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB25_16B_WORD1,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB38_8B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x7 line.long 0x0 "MB8_64B_WORD7,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD2,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB25_16B_WORD2,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB38_8B_WORD0,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB8_64B_WORD8,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x7 line.long 0x0 "WORD038,Message Buffer 38 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD3,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB25_16B_WORD3,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB38_8B_WORD1,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB8_64B_WORD9,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x7 line.long 0x0 "WORD138,Message Buffer 38 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS39,Message Buffer 39 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB15_32B_WORD4,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2F0++0x3 line.long 0x0 "MB26_16B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB39_8B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x7 line.long 0x0 "MB8_64B_WORD10,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID39,Message Buffer 39 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB15_32B_WORD5,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2F4++0x3 line.long 0x0 "MB26_16B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB39_8B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x7 line.long 0x0 "MB8_64B_WORD11,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD6,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB26_16B_WORD0,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB39_8B_WORD0,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB8_64B_WORD12,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x7 line.long 0x0 "WORD039,Message Buffer 39 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD7,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB26_16B_WORD1,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB39_8B_WORD1,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB8_64B_WORD13,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x7 line.long 0x0 "WORD139,Message Buffer 39 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS40,Message Buffer 40 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB16_32B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB26_16B_WORD2,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x300++0x3 line.long 0x0 "MB40_8B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x7 line.long 0x0 "MB8_64B_WORD14,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID40,Message Buffer 40 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB16_32B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB26_16B_WORD3,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x304++0x3 line.long 0x0 "MB40_8B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x7 line.long 0x0 "MB8_64B_WORD15,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD0,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB27_16B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x3 line.long 0x0 "MB40_8B_WORD0,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB9_64B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x7 line.long 0x0 "WORD040,Message Buffer 40 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD1,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB27_16B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x3 line.long 0x0 "MB40_8B_WORD1,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB9_64B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x7 line.long 0x0 "WORD140,Message Buffer 40 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS41,Message Buffer 41 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x3 line.long 0x0 "MB16_32B_WORD2,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB27_16B_WORD0,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB41_8B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x7 line.long 0x0 "MB9_64B_WORD0,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID41,Message Buffer 41 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x3 line.long 0x0 "MB16_32B_WORD3,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB27_16B_WORD1,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB41_8B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x7 line.long 0x0 "MB9_64B_WORD1,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD4,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB27_16B_WORD2,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB41_8B_WORD0,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB9_64B_WORD2,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x7 line.long 0x0 "WORD041,Message Buffer 41 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD5,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB27_16B_WORD3,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB41_8B_WORD1,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB9_64B_WORD3,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x7 line.long 0x0 "WORD141,Message Buffer 41 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS42,Message Buffer 42 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB16_32B_WORD6,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x320++0x3 line.long 0x0 "MB28_16B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB42_8B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x7 line.long 0x0 "MB9_64B_WORD4,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID42,Message Buffer 42 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB16_32B_WORD7,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x324++0x3 line.long 0x0 "MB28_16B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB42_8B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x7 line.long 0x0 "MB9_64B_WORD5,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x328++0x3 line.long 0x0 "MB28_16B_WORD0,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB42_8B_WORD0,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB9_64B_WORD6,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x328++0x7 line.long 0x0 "WORD042,Message Buffer 42 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x32C++0x3 line.long 0x0 "MB28_16B_WORD1,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB42_8B_WORD1,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB9_64B_WORD7,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x7 line.long 0x0 "WORD142,Message Buffer 42 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS43,Message Buffer 43 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x3 line.long 0x0 "MB17_32B_WORD0,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB28_16B_WORD2,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB43_8B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x7 line.long 0x0 "MB9_64B_WORD8,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID43,Message Buffer 43 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x3 line.long 0x0 "MB17_32B_WORD1,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB28_16B_WORD3,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB43_8B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x7 line.long 0x0 "MB9_64B_WORD9,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD2,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB29_16B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x338++0x3 line.long 0x0 "MB43_8B_WORD0,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB9_64B_WORD10,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x338++0x7 line.long 0x0 "WORD043,Message Buffer 43 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD3,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB29_16B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x33C++0x3 line.long 0x0 "MB43_8B_WORD1,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB9_64B_WORD11,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x7 line.long 0x0 "WORD143,Message Buffer 43 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS44,Message Buffer 44 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x3 line.long 0x0 "MB17_32B_WORD4,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB29_16B_WORD0,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB44_8B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x7 line.long 0x0 "MB9_64B_WORD12,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID44,Message Buffer 44 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x3 line.long 0x0 "MB17_32B_WORD5,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB29_16B_WORD1,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB44_8B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x7 line.long 0x0 "MB9_64B_WORD13,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD6,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB29_16B_WORD2,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB44_8B_WORD0,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB9_64B_WORD14,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x348++0x7 line.long 0x0 "WORD044,Message Buffer 44 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD7,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB29_16B_WORD3,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB44_8B_WORD1,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB9_64B_WORD15,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x7 line.long 0x0 "WORD144,Message Buffer 44 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS45,Message Buffer 45 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB10_64B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB18_32B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB30_16B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x7 line.long 0x0 "MB45_8B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID45,Message Buffer 45 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB10_64B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB18_32B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB30_16B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x7 line.long 0x0 "MB45_8B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD0,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB18_32B_WORD0,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB30_16B_WORD0,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB45_8B_WORD0,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x7 line.long 0x0 "WORD045,Message Buffer 45 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD1,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB18_32B_WORD1,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB30_16B_WORD1,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB45_8B_WORD1,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x7 line.long 0x0 "WORD145,Message Buffer 45 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS46,Message Buffer 46 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x360++0x3 line.long 0x0 "MB10_64B_WORD2,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB18_32B_WORD2,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB30_16B_WORD2,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x7 line.long 0x0 "MB46_8B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID46,Message Buffer 46 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x364++0x3 line.long 0x0 "MB10_64B_WORD3,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB18_32B_WORD3,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB30_16B_WORD3,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x7 line.long 0x0 "MB46_8B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD4,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB18_32B_WORD4,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB31_16B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x368++0x3 line.long 0x0 "MB46_8B_WORD0,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x368++0x7 line.long 0x0 "WORD046,Message Buffer 46 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD5,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB18_32B_WORD5,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB31_16B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x36C++0x3 line.long 0x0 "MB46_8B_WORD1,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x7 line.long 0x0 "WORD146,Message Buffer 46 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS47,Message Buffer 47 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x370++0x3 line.long 0x0 "MB10_64B_WORD6,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB18_32B_WORD6,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB31_16B_WORD0,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x370++0x7 line.long 0x0 "MB47_8B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID47,Message Buffer 47 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x374++0x3 line.long 0x0 "MB10_64B_WORD7,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB18_32B_WORD7,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB31_16B_WORD1,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x374++0x7 line.long 0x0 "MB47_8B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD8,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB19_32B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x378++0x3 line.long 0x0 "MB31_16B_WORD2,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB47_8B_WORD0,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x378++0x7 line.long 0x0 "WORD047,Message Buffer 47 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD9,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB19_32B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x37C++0x3 line.long 0x0 "MB31_16B_WORD3,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB47_8B_WORD1,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x7 line.long 0x0 "WORD147,Message Buffer 47 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS48,Message Buffer 48 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x3 line.long 0x0 "MB10_64B_WORD10,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB19_32B_WORD0,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB32_16B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x7 line.long 0x0 "MB48_8B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID48,Message Buffer 48 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x3 line.long 0x0 "MB10_64B_WORD11,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB19_32B_WORD1,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB32_16B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x7 line.long 0x0 "MB48_8B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD12,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB19_32B_WORD2,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB32_16B_WORD0,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB48_8B_WORD0,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x7 line.long 0x0 "WORD048,Message Buffer 48 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD13,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB19_32B_WORD3,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB32_16B_WORD1,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB48_8B_WORD1,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x7 line.long 0x0 "WORD148,Message Buffer 48 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS49,Message Buffer 49 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x390++0x3 line.long 0x0 "MB10_64B_WORD14,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB19_32B_WORD4,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB32_16B_WORD2,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x390++0x7 line.long 0x0 "MB49_8B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID49,Message Buffer 49 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x394++0x3 line.long 0x0 "MB10_64B_WORD15,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB19_32B_WORD5,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB32_16B_WORD3,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x394++0x7 line.long 0x0 "MB49_8B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB19_32B_WORD6,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x398++0x3 line.long 0x0 "MB33_16B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB49_8B_WORD0,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x398++0x7 line.long 0x0 "WORD049,Message Buffer 49 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB19_32B_WORD7,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x3 line.long 0x0 "MB33_16B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB49_8B_WORD1,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x7 line.long 0x0 "WORD149,Message Buffer 49 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS50,Message Buffer 50 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB11_64B_WORD0,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x3 line.long 0x0 "MB20_32B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB33_16B_WORD0,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x7 line.long 0x0 "MB50_8B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID50,Message Buffer 50 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB11_64B_WORD1,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x3 line.long 0x0 "MB20_32B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB33_16B_WORD1,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x7 line.long 0x0 "MB50_8B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD2,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB20_32B_WORD0,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB33_16B_WORD2,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB50_8B_WORD0,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x7 line.long 0x0 "WORD050,Message Buffer 50 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD3,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB20_32B_WORD1,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB33_16B_WORD3,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB50_8B_WORD1,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x7 line.long 0x0 "WORD150,Message Buffer 50 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS51,Message Buffer 51 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x3 line.long 0x0 "MB11_64B_WORD4,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB20_32B_WORD2,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB34_16B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x7 line.long 0x0 "MB51_8B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID51,Message Buffer 51 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x3 line.long 0x0 "MB11_64B_WORD5,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB20_32B_WORD3,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB34_16B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x7 line.long 0x0 "MB51_8B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD6,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB20_32B_WORD4,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB34_16B_WORD0,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB51_8B_WORD0,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x7 line.long 0x0 "WORD051,Message Buffer 51 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD7,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB20_32B_WORD5,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB34_16B_WORD1,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB51_8B_WORD1,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x7 line.long 0x0 "WORD151,Message Buffer 51 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS52,Message Buffer 52 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C0++0x3 line.long 0x0 "MB11_64B_WORD8,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB20_32B_WORD6,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB34_16B_WORD2,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x7 line.long 0x0 "MB52_8B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID52,Message Buffer 52 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3C4++0x3 line.long 0x0 "MB11_64B_WORD9,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB20_32B_WORD7,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB34_16B_WORD3,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x7 line.long 0x0 "MB52_8B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD10,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x3 line.long 0x0 "MB21_32B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB35_16B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB52_8B_WORD0,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x7 line.long 0x0 "WORD052,Message Buffer 52 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD11,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x3 line.long 0x0 "MB21_32B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB35_16B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB52_8B_WORD1,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x7 line.long 0x0 "WORD152,Message Buffer 52 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS53,Message Buffer 53 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3D0++0x3 line.long 0x0 "MB11_64B_WORD12,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB21_32B_WORD0,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB35_16B_WORD0,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x7 line.long 0x0 "MB53_8B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID53,Message Buffer 53 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3D4++0x3 line.long 0x0 "MB11_64B_WORD13,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB21_32B_WORD1,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB35_16B_WORD1,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x7 line.long 0x0 "MB53_8B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD14,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB21_32B_WORD2,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB35_16B_WORD2,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB53_8B_WORD0,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x7 line.long 0x0 "WORD053,Message Buffer 53 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD15,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB21_32B_WORD3,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB35_16B_WORD3,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB53_8B_WORD1,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x7 line.long 0x0 "WORD153,Message Buffer 53 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS54,Message Buffer 54 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB12_64B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB21_32B_WORD4,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3E0++0x3 line.long 0x0 "MB36_16B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x7 line.long 0x0 "MB54_8B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID54,Message Buffer 54 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB12_64B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB21_32B_WORD5,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3E4++0x3 line.long 0x0 "MB36_16B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x7 line.long 0x0 "MB54_8B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD0,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB21_32B_WORD6,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB36_16B_WORD0,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB54_8B_WORD0,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x7 line.long 0x0 "WORD054,Message Buffer 54 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD1,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB21_32B_WORD7,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB36_16B_WORD1,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB54_8B_WORD1,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x7 line.long 0x0 "WORD154,Message Buffer 54 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS55,Message Buffer 55 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB12_64B_WORD2,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x3 line.long 0x0 "MB22_32B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB36_16B_WORD2,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x7 line.long 0x0 "MB55_8B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID55,Message Buffer 55 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB12_64B_WORD3,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x3 line.long 0x0 "MB22_32B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB36_16B_WORD3,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x7 line.long 0x0 "MB55_8B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD4,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB22_32B_WORD0,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB37_16B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F8++0x3 line.long 0x0 "MB55_8B_WORD0,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x7 line.long 0x0 "WORD055,Message Buffer 55 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD5,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB22_32B_WORD1,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB37_16B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3FC++0x3 line.long 0x0 "MB55_8B_WORD1,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x7 line.long 0x0 "WORD155,Message Buffer 55 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS56,Message Buffer 56 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x400++0x3 line.long 0x0 "MB12_64B_WORD6,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB22_32B_WORD2,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB37_16B_WORD0,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x400++0x7 line.long 0x0 "MB56_8B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID56,Message Buffer 56 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x404++0x3 line.long 0x0 "MB12_64B_WORD7,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB22_32B_WORD3,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB37_16B_WORD1,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x404++0x7 line.long 0x0 "MB56_8B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD8,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB22_32B_WORD4,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB37_16B_WORD2,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB56_8B_WORD0,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x408++0x7 line.long 0x0 "WORD056,Message Buffer 56 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD9,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB22_32B_WORD5,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB37_16B_WORD3,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB56_8B_WORD1,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x7 line.long 0x0 "WORD156,Message Buffer 56 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS57,Message Buffer 57 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x3 line.long 0x0 "MB12_64B_WORD10,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB22_32B_WORD6,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB38_16B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x7 line.long 0x0 "MB57_8B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID57,Message Buffer 57 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x3 line.long 0x0 "MB12_64B_WORD11,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB22_32B_WORD7,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB38_16B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x7 line.long 0x0 "MB57_8B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD12,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB23_32B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x418++0x3 line.long 0x0 "MB38_16B_WORD0,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB57_8B_WORD0,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x7 line.long 0x0 "WORD057,Message Buffer 57 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD13,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB23_32B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x41C++0x3 line.long 0x0 "MB38_16B_WORD1,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB57_8B_WORD1,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x7 line.long 0x0 "WORD157,Message Buffer 57 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS58,Message Buffer 58 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x420++0x3 line.long 0x0 "MB12_64B_WORD14,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB23_32B_WORD0,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB38_16B_WORD2,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x420++0x7 line.long 0x0 "MB58_8B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID58,Message Buffer 58 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x424++0x3 line.long 0x0 "MB12_64B_WORD15,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB23_32B_WORD1,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB38_16B_WORD3,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x424++0x7 line.long 0x0 "MB58_8B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB23_32B_WORD2,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x428++0x3 line.long 0x0 "MB39_16B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB58_8B_WORD0,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x428++0x7 line.long 0x0 "WORD058,Message Buffer 58 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB23_32B_WORD3,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x3 line.long 0x0 "MB39_16B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB58_8B_WORD1,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x7 line.long 0x0 "WORD158,Message Buffer 58 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS59,Message Buffer 59 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x430++0x3 line.long 0x0 "MB13_64B_WORD0,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB23_32B_WORD4,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB39_16B_WORD0,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x7 line.long 0x0 "MB59_8B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID59,Message Buffer 59 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x434++0x3 line.long 0x0 "MB13_64B_WORD1,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB23_32B_WORD5,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB39_16B_WORD1,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x7 line.long 0x0 "MB59_8B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD2,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB23_32B_WORD6,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB39_16B_WORD2,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB59_8B_WORD0,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x438++0x7 line.long 0x0 "WORD059,Message Buffer 59 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD3,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB23_32B_WORD7,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB39_16B_WORD3,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB59_8B_WORD1,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x7 line.long 0x0 "WORD159,Message Buffer 59 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS60,Message Buffer 60 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB13_64B_WORD4,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x440++0x3 line.long 0x0 "MB24_32B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB40_16B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x7 line.long 0x0 "MB60_8B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID60,Message Buffer 60 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB13_64B_WORD5,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x444++0x3 line.long 0x0 "MB24_32B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB40_16B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x7 line.long 0x0 "MB60_8B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD6,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB24_32B_WORD0,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB40_16B_WORD0,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB60_8B_WORD0,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x7 line.long 0x0 "WORD060,Message Buffer 60 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD7,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB24_32B_WORD1,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB40_16B_WORD1,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB60_8B_WORD1,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x7 line.long 0x0 "WORD160,Message Buffer 60 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS61,Message Buffer 61 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x450++0x3 line.long 0x0 "MB13_64B_WORD8,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB24_32B_WORD2,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB40_16B_WORD2,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x7 line.long 0x0 "MB61_8B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID61,Message Buffer 61 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x454++0x3 line.long 0x0 "MB13_64B_WORD9,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB24_32B_WORD3,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB40_16B_WORD3,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x7 line.long 0x0 "MB61_8B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD10,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB24_32B_WORD4,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB41_16B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x458++0x3 line.long 0x0 "MB61_8B_WORD0,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x458++0x7 line.long 0x0 "WORD061,Message Buffer 61 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD11,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB24_32B_WORD5,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB41_16B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x45C++0x3 line.long 0x0 "MB61_8B_WORD1,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x7 line.long 0x0 "WORD161,Message Buffer 61 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS62,Message Buffer 62 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x460++0x3 line.long 0x0 "MB13_64B_WORD12,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB24_32B_WORD6,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB41_16B_WORD0,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x460++0x7 line.long 0x0 "MB62_8B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID62,Message Buffer 62 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x464++0x3 line.long 0x0 "MB13_64B_WORD13,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB24_32B_WORD7,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB41_16B_WORD1,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x464++0x7 line.long 0x0 "MB62_8B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD14,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB25_32B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x468++0x3 line.long 0x0 "MB41_16B_WORD2,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB62_8B_WORD0,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x468++0x7 line.long 0x0 "WORD062,Message Buffer 62 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD15,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB25_32B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x46C++0x3 line.long 0x0 "MB41_16B_WORD3,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB62_8B_WORD1,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x7 line.long 0x0 "WORD162,Message Buffer 62 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS63,Message Buffer 63 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB14_64B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB25_32B_WORD0,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x470++0x3 line.long 0x0 "MB42_16B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x7 line.long 0x0 "MB63_8B_CS,Message Buffer 63 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID63,Message Buffer 63 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB14_64B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB25_32B_WORD1,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x474++0x3 line.long 0x0 "MB42_16B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x7 line.long 0x0 "MB63_8B_ID,Message Buffer 63 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD0,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB25_32B_WORD2,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB42_16B_WORD0,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB63_8B_WORD0,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x7 line.long 0x0 "WORD063,Message Buffer 63 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD1,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB25_32B_WORD3,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB42_16B_WORD1,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB63_8B_WORD1,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x7 line.long 0x0 "WORD163,Message Buffer 63 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS64,Message Buffer 64 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x480++0x3 line.long 0x0 "MB14_64B_WORD2,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB25_32B_WORD4,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB42_16B_WORD2,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x7 line.long 0x0 "MB64_8B_CS,Message Buffer 64 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID64,Message Buffer 64 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x484++0x3 line.long 0x0 "MB14_64B_WORD3,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB25_32B_WORD5,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB42_16B_WORD3,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x7 line.long 0x0 "MB64_8B_ID,Message Buffer 64 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD4,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB25_32B_WORD6,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB43_16B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x488++0x3 line.long 0x0 "MB64_8B_WORD0,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x488++0x7 line.long 0x0 "WORD064,Message Buffer 64 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD5,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB25_32B_WORD7,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB43_16B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x48C++0x3 line.long 0x0 "MB64_8B_WORD1,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x7 line.long 0x0 "WORD164,Message Buffer 64 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS65,Message Buffer 65 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB14_64B_WORD6,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x490++0x3 line.long 0x0 "MB26_32B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB43_16B_WORD0,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x490++0x7 line.long 0x0 "MB65_8B_CS,Message Buffer 65 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID65,Message Buffer 65 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB14_64B_WORD7,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x494++0x3 line.long 0x0 "MB26_32B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB43_16B_WORD1,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x494++0x7 line.long 0x0 "MB65_8B_ID,Message Buffer 65 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD8,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB26_32B_WORD0,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB43_16B_WORD2,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB65_8B_WORD0,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x7 line.long 0x0 "WORD065,Message Buffer 65 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD9,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB26_32B_WORD1,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB43_16B_WORD3,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB65_8B_WORD1,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x7 line.long 0x0 "WORD165,Message Buffer 65 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS66,Message Buffer 66 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x3 line.long 0x0 "MB14_64B_WORD10,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB26_32B_WORD2,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB44_16B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x7 line.long 0x0 "MB66_8B_CS,Message Buffer 66 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID66,Message Buffer 66 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x3 line.long 0x0 "MB14_64B_WORD11,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB26_32B_WORD3,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB44_16B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x7 line.long 0x0 "MB66_8B_ID,Message Buffer 66 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD12,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB26_32B_WORD4,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB44_16B_WORD0,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB66_8B_WORD0,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x7 line.long 0x0 "WORD066,Message Buffer 66 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD13,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB26_32B_WORD5,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB44_16B_WORD1,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB66_8B_WORD1,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x7 line.long 0x0 "WORD166,Message Buffer 66 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS67,Message Buffer 67 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B0++0x3 line.long 0x0 "MB14_64B_WORD14,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB26_32B_WORD6,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB44_16B_WORD2,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x7 line.long 0x0 "MB67_8B_CS,Message Buffer 67 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID67,Message Buffer 67 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4B4++0x3 line.long 0x0 "MB14_64B_WORD15,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB26_32B_WORD7,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB44_16B_WORD3,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x7 line.long 0x0 "MB67_8B_ID,Message Buffer 67 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB27_32B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB45_16B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB67_8B_WORD0,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4B8++0x7 line.long 0x0 "WORD067,Message Buffer 67 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB27_32B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB45_16B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB67_8B_WORD1,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4BC++0x7 line.long 0x0 "WORD167,Message Buffer 67 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS68,Message Buffer 68 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4C0++0x3 line.long 0x0 "MB15_64B_WORD0,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB27_32B_WORD0,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB45_16B_WORD0,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x7 line.long 0x0 "MB68_8B_CS,Message Buffer 68 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID68,Message Buffer 68 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4C4++0x3 line.long 0x0 "MB15_64B_WORD1,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB27_32B_WORD1,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB45_16B_WORD1,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x7 line.long 0x0 "MB68_8B_ID,Message Buffer 68 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD2,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB27_32B_WORD2,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB45_16B_WORD2,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB68_8B_WORD0,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x7 line.long 0x0 "WORD068,Message Buffer 68 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD3,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB27_32B_WORD3,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB45_16B_WORD3,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB68_8B_WORD1,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x7 line.long 0x0 "WORD168,Message Buffer 68 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS69,Message Buffer 69 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x3 line.long 0x0 "MB15_64B_WORD4,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB27_32B_WORD4,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB46_16B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x7 line.long 0x0 "MB69_8B_CS,Message Buffer 69 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID69,Message Buffer 69 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x3 line.long 0x0 "MB15_64B_WORD5,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB27_32B_WORD5,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB46_16B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x7 line.long 0x0 "MB69_8B_ID,Message Buffer 69 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD6,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB27_32B_WORD6,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB46_16B_WORD0,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB69_8B_WORD0,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x7 line.long 0x0 "WORD069,Message Buffer 69 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD7,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB27_32B_WORD7,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB46_16B_WORD1,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB69_8B_WORD1,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x7 line.long 0x0 "WORD169,Message Buffer 69 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS70,Message Buffer 70 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB15_64B_WORD8,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x3 line.long 0x0 "MB28_32B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB46_16B_WORD2,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x7 line.long 0x0 "MB70_8B_CS,Message Buffer 70 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID70,Message Buffer 70 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB15_64B_WORD9,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x3 line.long 0x0 "MB28_32B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB46_16B_WORD3,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x7 line.long 0x0 "MB70_8B_ID,Message Buffer 70 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD10,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB28_32B_WORD0,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB47_16B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E8++0x3 line.long 0x0 "MB70_8B_WORD0,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x7 line.long 0x0 "WORD070,Message Buffer 70 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD11,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB28_32B_WORD1,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB47_16B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4EC++0x3 line.long 0x0 "MB70_8B_WORD1,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x7 line.long 0x0 "WORD170,Message Buffer 70 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS71,Message Buffer 71 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4F0++0x3 line.long 0x0 "MB15_64B_WORD12,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB28_32B_WORD2,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB47_16B_WORD0,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x7 line.long 0x0 "MB71_8B_CS,Message Buffer 71 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID71,Message Buffer 71 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4F4++0x3 line.long 0x0 "MB15_64B_WORD13,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB28_32B_WORD3,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB47_16B_WORD1,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x7 line.long 0x0 "MB71_8B_ID,Message Buffer 71 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD14,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB28_32B_WORD4,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB47_16B_WORD2,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB71_8B_WORD0,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x7 line.long 0x0 "WORD071,Message Buffer 71 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD15,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB28_32B_WORD5,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB47_16B_WORD3,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB71_8B_WORD1,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x7 line.long 0x0 "WORD171,Message Buffer 71 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS72,Message Buffer 72 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB16_64B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB28_32B_WORD6,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x500++0x3 line.long 0x0 "MB48_16B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x7 line.long 0x0 "MB72_8B_CS,Message Buffer 72 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID72,Message Buffer 72 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB16_64B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB28_32B_WORD7,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x504++0x3 line.long 0x0 "MB48_16B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x7 line.long 0x0 "MB72_8B_ID,Message Buffer 72 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD0,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB29_32B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x508++0x3 line.long 0x0 "MB48_16B_WORD0,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB72_8B_WORD0,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x7 line.long 0x0 "WORD072,Message Buffer 72 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD1,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB29_32B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x50C++0x3 line.long 0x0 "MB48_16B_WORD1,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB72_8B_WORD1,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x7 line.long 0x0 "WORD172,Message Buffer 72 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS73,Message Buffer 73 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x510++0x3 line.long 0x0 "MB16_64B_WORD2,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB29_32B_WORD0,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB48_16B_WORD2,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x7 line.long 0x0 "MB73_8B_CS,Message Buffer 73 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID73,Message Buffer 73 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x514++0x3 line.long 0x0 "MB16_64B_WORD3,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB29_32B_WORD1,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB48_16B_WORD3,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x7 line.long 0x0 "MB73_8B_ID,Message Buffer 73 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD4,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB29_32B_WORD2,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB49_16B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x518++0x3 line.long 0x0 "MB73_8B_WORD0,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x518++0x7 line.long 0x0 "WORD073,Message Buffer 73 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD5,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB29_32B_WORD3,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB49_16B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x51C++0x3 line.long 0x0 "MB73_8B_WORD1,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x7 line.long 0x0 "WORD173,Message Buffer 73 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS74,Message Buffer 74 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x520++0x3 line.long 0x0 "MB16_64B_WORD6,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB29_32B_WORD4,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB49_16B_WORD0,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x520++0x7 line.long 0x0 "MB74_8B_CS,Message Buffer 74 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID74,Message Buffer 74 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x524++0x3 line.long 0x0 "MB16_64B_WORD7,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB29_32B_WORD5,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB49_16B_WORD1,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x524++0x7 line.long 0x0 "MB74_8B_ID,Message Buffer 74 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD8,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB29_32B_WORD6,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB49_16B_WORD2,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB74_8B_WORD0,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x528++0x7 line.long 0x0 "WORD074,Message Buffer 74 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD9,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB29_32B_WORD7,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB49_16B_WORD3,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB74_8B_WORD1,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x7 line.long 0x0 "WORD174,Message Buffer 74 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS75,Message Buffer 75 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB16_64B_WORD10,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x530++0x3 line.long 0x0 "MB30_32B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB50_16B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x7 line.long 0x0 "MB75_8B_CS,Message Buffer 75 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID75,Message Buffer 75 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB16_64B_WORD11,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x534++0x3 line.long 0x0 "MB30_32B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB50_16B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x7 line.long 0x0 "MB75_8B_ID,Message Buffer 75 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD12,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB30_32B_WORD0,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB50_16B_WORD0,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB75_8B_WORD0,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x7 line.long 0x0 "WORD075,Message Buffer 75 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD13,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB30_32B_WORD1,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB50_16B_WORD1,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB75_8B_WORD1,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x7 line.long 0x0 "WORD175,Message Buffer 75 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS76,Message Buffer 76 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x540++0x3 line.long 0x0 "MB16_64B_WORD14,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB30_32B_WORD2,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB50_16B_WORD2,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x7 line.long 0x0 "MB76_8B_CS,Message Buffer 76 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID76,Message Buffer 76 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x544++0x3 line.long 0x0 "MB16_64B_WORD15,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB30_32B_WORD3,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB50_16B_WORD3,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x7 line.long 0x0 "MB76_8B_ID,Message Buffer 76 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB30_32B_WORD4,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x548++0x3 line.long 0x0 "MB51_16B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB76_8B_WORD0,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x548++0x7 line.long 0x0 "WORD076,Message Buffer 76 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB30_32B_WORD5,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x3 line.long 0x0 "MB51_16B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB76_8B_WORD1,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x7 line.long 0x0 "WORD176,Message Buffer 76 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS77,Message Buffer 77 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x550++0x3 line.long 0x0 "MB17_64B_WORD0,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB30_32B_WORD6,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB51_16B_WORD0,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x7 line.long 0x0 "MB77_8B_CS,Message Buffer 77 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID77,Message Buffer 77 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x554++0x3 line.long 0x0 "MB17_64B_WORD1,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB30_32B_WORD7,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB51_16B_WORD1,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x7 line.long 0x0 "MB77_8B_ID,Message Buffer 77 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD2,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB31_32B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x558++0x3 line.long 0x0 "MB51_16B_WORD2,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB77_8B_WORD0,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x558++0x7 line.long 0x0 "WORD077,Message Buffer 77 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD3,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB31_32B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x55C++0x3 line.long 0x0 "MB51_16B_WORD3,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB77_8B_WORD1,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x7 line.long 0x0 "WORD177,Message Buffer 77 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS78,Message Buffer 78 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x3 line.long 0x0 "MB17_64B_WORD4,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB31_32B_WORD0,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB52_16B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x7 line.long 0x0 "MB78_8B_CS,Message Buffer 78 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID78,Message Buffer 78 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x3 line.long 0x0 "MB17_64B_WORD5,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB31_32B_WORD1,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB52_16B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x7 line.long 0x0 "MB78_8B_ID,Message Buffer 78 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD6,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB31_32B_WORD2,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB52_16B_WORD0,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB78_8B_WORD0,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x7 line.long 0x0 "WORD078,Message Buffer 78 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD7,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB31_32B_WORD3,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB52_16B_WORD1,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB78_8B_WORD1,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x7 line.long 0x0 "WORD178,Message Buffer 78 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS79,Message Buffer 79 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x570++0x3 line.long 0x0 "MB17_64B_WORD8,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB31_32B_WORD4,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB52_16B_WORD2,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x570++0x7 line.long 0x0 "MB79_8B_CS,Message Buffer 79 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID79,Message Buffer 79 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x574++0x3 line.long 0x0 "MB17_64B_WORD9,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB31_32B_WORD5,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB52_16B_WORD3,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x574++0x7 line.long 0x0 "MB79_8B_ID,Message Buffer 79 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD10,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB31_32B_WORD6,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB53_16B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x578++0x3 line.long 0x0 "MB79_8B_WORD0,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x578++0x7 line.long 0x0 "WORD079,Message Buffer 79 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD11,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB31_32B_WORD7,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB53_16B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x57C++0x3 line.long 0x0 "MB79_8B_WORD1,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x7 line.long 0x0 "WORD179,Message Buffer 79 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS80,Message Buffer 80 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB17_64B_WORD12,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x580++0x3 line.long 0x0 "MB32_32B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB53_16B_WORD0,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x580++0x7 line.long 0x0 "MB80_8B_CS,Message Buffer 80 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID80,Message Buffer 80 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB17_64B_WORD13,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x584++0x3 line.long 0x0 "MB32_32B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB53_16B_WORD1,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x584++0x7 line.long 0x0 "MB80_8B_ID,Message Buffer 80 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD14,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB32_32B_WORD0,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB53_16B_WORD2,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB80_8B_WORD0,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x7 line.long 0x0 "WORD080,Message Buffer 80 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD15,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB32_32B_WORD1,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB53_16B_WORD3,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB80_8B_WORD1,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x7 line.long 0x0 "WORD180,Message Buffer 80 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS81,Message Buffer 81 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB18_64B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB32_32B_WORD2,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x590++0x3 line.long 0x0 "MB54_16B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x7 line.long 0x0 "MB81_8B_CS,Message Buffer 81 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID81,Message Buffer 81 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB18_64B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB32_32B_WORD3,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x594++0x3 line.long 0x0 "MB54_16B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x7 line.long 0x0 "MB81_8B_ID,Message Buffer 81 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD0,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB32_32B_WORD4,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB54_16B_WORD0,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB81_8B_WORD0,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x7 line.long 0x0 "WORD081,Message Buffer 81 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD1,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB32_32B_WORD5,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB54_16B_WORD1,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB81_8B_WORD1,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x7 line.long 0x0 "WORD181,Message Buffer 81 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS82,Message Buffer 82 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A0++0x3 line.long 0x0 "MB18_64B_WORD2,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB32_32B_WORD6,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB54_16B_WORD2,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x7 line.long 0x0 "MB82_8B_CS,Message Buffer 82 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID82,Message Buffer 82 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5A4++0x3 line.long 0x0 "MB18_64B_WORD3,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB32_32B_WORD7,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB54_16B_WORD3,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x7 line.long 0x0 "MB82_8B_ID,Message Buffer 82 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD4,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x3 line.long 0x0 "MB33_32B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB55_16B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB82_8B_WORD0,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x7 line.long 0x0 "WORD082,Message Buffer 82 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD5,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x3 line.long 0x0 "MB33_32B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB55_16B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB82_8B_WORD1,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x7 line.long 0x0 "WORD182,Message Buffer 82 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS83,Message Buffer 83 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5B0++0x3 line.long 0x0 "MB18_64B_WORD6,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB33_32B_WORD0,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB55_16B_WORD0,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x7 line.long 0x0 "MB83_8B_CS,Message Buffer 83 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID83,Message Buffer 83 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5B4++0x3 line.long 0x0 "MB18_64B_WORD7,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB33_32B_WORD1,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB55_16B_WORD1,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x7 line.long 0x0 "MB83_8B_ID,Message Buffer 83 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD8,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB33_32B_WORD2,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB55_16B_WORD2,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB83_8B_WORD0,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x7 line.long 0x0 "WORD083,Message Buffer 83 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD9,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB33_32B_WORD3,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB55_16B_WORD3,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB83_8B_WORD1,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x7 line.long 0x0 "WORD183,Message Buffer 83 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS84,Message Buffer 84 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x3 line.long 0x0 "MB18_64B_WORD10,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB33_32B_WORD4,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB56_16B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x7 line.long 0x0 "MB84_8B_CS,Message Buffer 84 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID84,Message Buffer 84 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x3 line.long 0x0 "MB18_64B_WORD11,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB33_32B_WORD5,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB56_16B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x7 line.long 0x0 "MB84_8B_ID,Message Buffer 84 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD12,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB33_32B_WORD6,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB56_16B_WORD0,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB84_8B_WORD0,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x7 line.long 0x0 "WORD084,Message Buffer 84 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD13,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB33_32B_WORD7,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB56_16B_WORD1,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB84_8B_WORD1,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x7 line.long 0x0 "WORD184,Message Buffer 84 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS85,Message Buffer 85 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB18_64B_WORD14,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x3 line.long 0x0 "MB34_32B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB56_16B_WORD2,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x7 line.long 0x0 "MB85_8B_CS,Message Buffer 85 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID85,Message Buffer 85 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB18_64B_WORD15,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x3 line.long 0x0 "MB34_32B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB56_16B_WORD3,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x7 line.long 0x0 "MB85_8B_ID,Message Buffer 85 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_CS,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB34_32B_WORD0,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x3 line.long 0x0 "MB57_16B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB85_8B_WORD0,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x7 line.long 0x0 "WORD085,Message Buffer 85 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_ID,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB34_32B_WORD1,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x3 line.long 0x0 "MB57_16B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB85_8B_WORD1,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x7 line.long 0x0 "WORD185,Message Buffer 85 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS86,Message Buffer 86 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5E0++0x3 line.long 0x0 "MB19_64B_WORD0,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB34_32B_WORD2,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB57_16B_WORD0,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x7 line.long 0x0 "MB86_8B_CS,Message Buffer 86 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID86,Message Buffer 86 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5E4++0x3 line.long 0x0 "MB19_64B_WORD1,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB34_32B_WORD3,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB57_16B_WORD1,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x7 line.long 0x0 "MB86_8B_ID,Message Buffer 86 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD2,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB34_32B_WORD4,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB57_16B_WORD2,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB86_8B_WORD0,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x7 line.long 0x0 "WORD086,Message Buffer 86 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD3,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB34_32B_WORD5,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB57_16B_WORD3,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB86_8B_WORD1,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x7 line.long 0x0 "WORD186,Message Buffer 86 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS87,Message Buffer 87 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x3 line.long 0x0 "MB19_64B_WORD4,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB34_32B_WORD6,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB58_16B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x7 line.long 0x0 "MB87_8B_CS,Message Buffer 87 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID87,Message Buffer 87 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x3 line.long 0x0 "MB19_64B_WORD5,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB34_32B_WORD7,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB58_16B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x7 line.long 0x0 "MB87_8B_ID,Message Buffer 87 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD6,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB35_32B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F8++0x3 line.long 0x0 "MB58_16B_WORD0,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB87_8B_WORD0,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x7 line.long 0x0 "WORD087,Message Buffer 87 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD7,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB35_32B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5FC++0x3 line.long 0x0 "MB58_16B_WORD1,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB87_8B_WORD1,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x7 line.long 0x0 "WORD187,Message Buffer 87 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS88,Message Buffer 88 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x600++0x3 line.long 0x0 "MB19_64B_WORD8,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB35_32B_WORD0,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB58_16B_WORD2,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x600++0x7 line.long 0x0 "MB88_8B_CS,Message Buffer 88 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID88,Message Buffer 88 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x604++0x3 line.long 0x0 "MB19_64B_WORD9,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB35_32B_WORD1,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB58_16B_WORD3,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x604++0x7 line.long 0x0 "MB88_8B_ID,Message Buffer 88 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD10,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB35_32B_WORD2,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB59_16B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x608++0x3 line.long 0x0 "MB88_8B_WORD0,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x608++0x7 line.long 0x0 "WORD088,Message Buffer 88 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD11,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB35_32B_WORD3,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB59_16B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x60C++0x3 line.long 0x0 "MB88_8B_WORD1,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x7 line.long 0x0 "WORD188,Message Buffer 88 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS89,Message Buffer 89 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x610++0x3 line.long 0x0 "MB19_64B_WORD12,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB35_32B_WORD4,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB59_16B_WORD0,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x610++0x7 line.long 0x0 "MB89_8B_CS,Message Buffer 89 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID89,Message Buffer 89 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x614++0x3 line.long 0x0 "MB19_64B_WORD13,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB35_32B_WORD5,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB59_16B_WORD1,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x614++0x7 line.long 0x0 "MB89_8B_ID,Message Buffer 89 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD14,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB35_32B_WORD6,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB59_16B_WORD2,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB89_8B_WORD0,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x618++0x7 line.long 0x0 "WORD089,Message Buffer 89 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD15,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB35_32B_WORD7,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB59_16B_WORD3,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB89_8B_WORD1,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x7 line.long 0x0 "WORD189,Message Buffer 89 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS90,Message Buffer 90 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB20_64B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB60_16B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x7 line.long 0x0 "MB90_8B_CS,Message Buffer 90 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID90,Message Buffer 90 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB20_64B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB60_16B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x7 line.long 0x0 "MB90_8B_ID,Message Buffer 90 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD0,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB60_16B_WORD0,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB90_8B_WORD0,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x7 line.long 0x0 "WORD090,Message Buffer 90 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD1,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB60_16B_WORD1,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB90_8B_WORD1,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x7 line.long 0x0 "WORD190,Message Buffer 90 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS91,Message Buffer 91 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x630++0x3 line.long 0x0 "MB20_64B_WORD2,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x3 line.long 0x0 "MB60_16B_WORD2,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x7 line.long 0x0 "MB91_8B_CS,Message Buffer 91 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID91,Message Buffer 91 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x634++0x3 line.long 0x0 "MB20_64B_WORD3,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x3 line.long 0x0 "MB60_16B_WORD3,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x7 line.long 0x0 "MB91_8B_ID,Message Buffer 91 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD4,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x638++0x3 line.long 0x0 "MB61_16B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x638++0x3 line.long 0x0 "MB91_8B_WORD0,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x638++0x7 line.long 0x0 "WORD091,Message Buffer 91 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD5,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x3 line.long 0x0 "MB61_16B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x63C++0x3 line.long 0x0 "MB91_8B_WORD1,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x7 line.long 0x0 "WORD191,Message Buffer 91 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS92,Message Buffer 92 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x640++0x3 line.long 0x0 "MB20_64B_WORD6,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x640++0x3 line.long 0x0 "MB61_16B_WORD0,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x640++0x7 line.long 0x0 "MB92_8B_CS,Message Buffer 92 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID92,Message Buffer 92 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x644++0x3 line.long 0x0 "MB20_64B_WORD7,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x644++0x3 line.long 0x0 "MB61_16B_WORD1,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x644++0x7 line.long 0x0 "MB92_8B_ID,Message Buffer 92 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD8,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB61_16B_WORD2,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB92_8B_WORD0,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x648++0x7 line.long 0x0 "WORD092,Message Buffer 92 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD9,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB61_16B_WORD3,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB92_8B_WORD1,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x7 line.long 0x0 "WORD192,Message Buffer 92 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS93,Message Buffer 93 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x3 line.long 0x0 "MB20_64B_WORD10,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x650++0x3 line.long 0x0 "MB62_16B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x7 line.long 0x0 "MB93_8B_CS,Message Buffer 93 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID93,Message Buffer 93 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x3 line.long 0x0 "MB20_64B_WORD11,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x654++0x3 line.long 0x0 "MB62_16B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x7 line.long 0x0 "MB93_8B_ID,Message Buffer 93 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD12,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB62_16B_WORD0,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB93_8B_WORD0,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x7 line.long 0x0 "WORD093,Message Buffer 93 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD13,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB62_16B_WORD1,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB93_8B_WORD1,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x7 line.long 0x0 "WORD193,Message Buffer 93 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS94,Message Buffer 94 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x660++0x3 line.long 0x0 "MB20_64B_WORD14,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x660++0x3 line.long 0x0 "MB62_16B_WORD2,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x660++0x7 line.long 0x0 "MB94_8B_CS,Message Buffer 94 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID94,Message Buffer 94 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x664++0x3 line.long 0x0 "MB20_64B_WORD15,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x664++0x3 line.long 0x0 "MB62_16B_WORD3,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x664++0x7 line.long 0x0 "MB94_8B_ID,Message Buffer 94 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB94_8B_WORD0,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x668++0x7 line.long 0x0 "WORD094,Message Buffer 94 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB94_8B_WORD1,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x66C++0x7 line.long 0x0 "WORD194,Message Buffer 94 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS95,Message Buffer 95 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x670++0x7 line.long 0x0 "MB95_8B_CS,Message Buffer 95 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID95,Message Buffer 95 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x674++0x7 line.long 0x0 "MB95_8B_ID,Message Buffer 95 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB95_8B_WORD0,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x678++0x7 line.long 0x0 "WORD095,Message Buffer 95 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB95_8B_WORD1,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x67C++0x3 line.long 0x0 "WORD195,Message Buffer 95 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "RXIMR[$1],Rx Individual Mask Registers" hexmask.long 0x0 0.--31. 1. "MI,Individual Mask Bits" repeat.end group.long 0xAE0++0xF line.long 0x0 "MECR,Memory Error Control Register" bitfld.long 0x0 31. "ECRWRDIS,Error Configuration Register Write Disable" "0: Write is enabled.,1: Write is disabled." bitfld.long 0x0 19. "HANCEI_MSK,Host Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 18. "FANCEI_MSK,FlexCAN Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." bitfld.long 0x0 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 15. "HAERRIE,Host Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." bitfld.long 0x0 14. "FAERRIE,FlexCAN Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." newline bitfld.long 0x0 13. "EXTERRIE,Extended Error Injection Enable" "0: Error injection is applied only to the 32-bit..,1: Error injection is applied to the 64-bit word." bitfld.long 0x0 9. "RERRDIS,Error Report Disable" "0: Enable updates of the error report registers.,1: Disable updates of the error report registers." newline bitfld.long 0x0 8. "ECCDIS,Error Correction Disable" "0: Enable memory error correction.,1: Disable memory error correction." bitfld.long 0x0 7. "NCEFAFRZ,Non-Correctable Errors In FlexCAN Access Put Device In Freeze Mode" "0: Keep normal operation.,1: Put FlexCAN in Freeze mode (see section 'Freeze.." line.long 0x4 "ERRIAR,Error Injection Address Register" hexmask.long.word 0x4 2.--13. 1. "INJADDR_H,Error Injection Address High" rbitfld.long 0x4 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3" line.long 0x8 "ERRIDPR,Error Injection Data Pattern Register" hexmask.long 0x8 0.--31. 1. "DFLIP,Data flip pattern" line.long 0xC "ERRIPPR,Error Injection Parity Pattern Register" hexmask.long.byte 0xC 24.--28. 1. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" hexmask.long.byte 0xC 16.--20. 1. "PFLIP2,Parity Flip Pattern For Byte 2" newline hexmask.long.byte 0xC 8.--12. 1. "PFLIP1,Parity Flip Pattern For Byte 1" hexmask.long.byte 0xC 0.--4. 1. "PFLIP0,Parity Flip Pattern For Byte 0 (Least Significant)" rgroup.long 0xAF0++0xB line.long 0x0 "RERRAR,Error Report Address Register" bitfld.long 0x0 24. "NCE,Non-Correctable Error" "0: Reporting a correctable error,1: Reporting a non-correctable error" bitfld.long 0x0 16.--18. "SAID,SAID" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 0.--13. 1. "ERRADDR,Address Where Error Detected" line.long 0x4 "RERRDR,Error Report Data Register" hexmask.long 0x4 0.--31. 1. "RDATA,Raw data word read from memory with error" line.long 0x8 "RERRSYNR,Error Report Syndrome Register" bitfld.long 0x8 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 24.--28. 1. "SYND3,Error Syndrome For Byte 3 (most significant)" newline bitfld.long 0x8 23. "BE2,Byte Enabled For Byte 2" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 16.--20. 1. "SYND2,Error Syndrome For Byte 2" newline bitfld.long 0x8 15. "BE1,Byte Enabled For Byte 1" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 8.--12. 1. "SYND1,Error Syndrome for Byte 1" newline bitfld.long 0x8 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 0.--4. 1. "SYND0,Error Syndrome For Byte 0 (least significant)" group.long 0xAFC++0x3 line.long 0x0 "ERRSR,Error Status Register" eventfld.long 0x0 19. "HANCEIF,Host Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in host..,1: A non-correctable error was detected in a host.." eventfld.long 0x0 18. "FANCEIF,FlexCAN Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in..,1: A non-correctable error was detected in a.." newline eventfld.long 0x0 16. "CEIF,Correctable Error Interrupt Flag" "0: No correctable errors were detected so far.,1: A correctable error was detected." eventfld.long 0x0 3. "HANCEIOF,Host Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in host..,1: Overrun on non-correctable errors in host access" newline eventfld.long 0x0 2. "FANCEIOF,FlexCAN Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in FlexCAN..,1: Overrun on non-correctable errors in FlexCAN.." eventfld.long 0x0 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0: No overrun on correctable errors,1: Overrun on correctable errors" group.long 0xBF0++0x17 line.long 0x0 "EPRS,Enhanced CAN Bit Timing Prescalers" hexmask.long.word 0x0 16.--25. 1. "EDPRESDIV,Extended Data Phase Prescaler Division Factor" hexmask.long.word 0x0 0.--9. 1. "ENPRESDIV,Extended Nominal Prescaler Division Factor" line.long 0x4 "ENCBT,Enhanced Nominal CAN Bit Timing" hexmask.long.byte 0x4 22.--28. 1. "NRJW,Nominal Resynchronization Jump Width" hexmask.long.byte 0x4 12.--18. 1. "NTSEG2,Nominal Time Segment 2" newline hexmask.long.byte 0x4 0.--7. 1. "NTSEG1,Nominal Time Segment 1" line.long 0x8 "EDCBT,Enhanced Data Phase CAN bit Timing" hexmask.long.byte 0x8 22.--25. 1. "DRJW,Data Phase Resynchronization Jump Width" hexmask.long.byte 0x8 12.--15. 1. "DTSEG2,Data Phase Time Segment 2" newline hexmask.long.byte 0x8 0.--4. 1. "DTSEG1,Data Phase Segment 1" line.long 0xC "ETDC,Enhanced Transceiver Delay Compensation" bitfld.long 0xC 31. "ETDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" bitfld.long 0xC 30. "TDMDIS,Transceiver Delay Measurement Disable" "0: TDC measurement is enabled,1: TDC measurement is disabled" newline hexmask.long.byte 0xC 16.--22. 1. "ETDCOFF,Enhanced Transceiver Delay Compensation Offset" eventfld.long 0xC 15. "ETDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0xC 0.--7. 1. "ETDCVAL,Enhanced Transceiver Delay Compensation Value" line.long 0x10 "FDCTRL,CAN FD Control Register" bitfld.long 0x10 31. "FDRATE,Bit Rate Switch Enable" "0: Transmit a frame in nominal rate. The BRS bit in..,1: Transmit a frame with bit rate switching if the.." bitfld.long 0x10 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." bitfld.long 0x10 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 15. "TDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" eventfld.long 0x10 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0x10 8.--12. 1. "TDCOFF,Transceiver Delay Compensation Offset" hexmask.long.byte 0x10 0.--5. 1. "TDCVAL,Transceiver Delay Compensation Value" line.long 0x14 "FDCBT,CAN FD Bit Timing Register" hexmask.long.word 0x14 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor" bitfld.long 0x14 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x14 10.--14. 1. "FPROPSEG,Fast Propagation Segment" bitfld.long 0x14 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7" rgroup.long 0xC08++0x3 line.long 0x0 "FDCRC,CAN FD CRC Register" hexmask.long.byte 0x0 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC" hexmask.long.tbyte 0x0 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value" group.long 0xC0C++0xB line.long 0x0 "ERFCR,Enhanced Rx FIFO Control Register" bitfld.long 0x0 31. "ERFEN,Enhanced Rx FIFO enable" "0: Enhanced Rx FIFO is disabled,1: Enhanced Rx FIFO is enabled" hexmask.long.byte 0x0 26.--30. 1. "DMALW,DMA Last Word" newline hexmask.long.byte 0x0 16.--22. 1. "NEXIF,Number of Extended ID Filter Elements" hexmask.long.byte 0x0 8.--13. 1. "NFE,Number of Enhanced Rx FIFO Filter Elements" newline hexmask.long.byte 0x0 0.--4. 1. "ERFWM,Enhanced Rx FIFO Watermark" line.long 0x4 "ERFIER,Enhanced Rx FIFO Interrupt Enable Register" bitfld.long 0x4 31. "ERFUFWIE,Enhanced Rx FIFO Underflow Interrupt Enable" "0: Enhanced Rx FIFO Underflow interrupt is disabled,1: Enhanced Rx FIFO Underflow interrupt is enabled" bitfld.long 0x4 30. "ERFOVFIE,Enhanced Rx FIFO Overflow Interrupt Enable" "0: Enhanced Rx FIFO Overflow is disabled,1: Enhanced Rx FIFO Overflow is enabled" newline bitfld.long 0x4 29. "ERFWMIIE,Enhanced Rx FIFO Watermark Indication Interrupt Enable" "0: Enhanced Rx FIFO Watermark interrupt is disabled,1: Enhanced Rx FIFO Watermark interrupt is enabled" bitfld.long 0x4 28. "ERFDAIE,Enhanced Rx FIFO Data Available Interrupt Enable" "0: Enhanced Rx FIFO Data Available interrupt is..,1: Enhanced Rx FIFO Data Available interrupt is.." line.long 0x8 "ERFSR,Enhanced Rx FIFO Status Register" eventfld.long 0x8 31. "ERFUFW,Enhanced Rx FIFO Underflow" "0: No such occurrence,1: Enhanced Rx FIFO underflow" eventfld.long 0x8 30. "ERFOVF,Enhanced Rx FIFO Overflow" "0: No such occurrence,1: Enhanced Rx FIFO overflow" newline eventfld.long 0x8 29. "ERFWMI,Enhanced Rx FIFO Watermark Indication" "0: No such occurrence,1: The number of messages in FIFO is greater than.." eventfld.long 0x8 28. "ERFDA,Enhanced Rx FIFO Data Available" "0: No such occurrence,1: There is at least one message stored in Enhanced.." newline bitfld.long 0x8 27. "ERFCLR,Enhanced Rx FIFO Clear" "0: No effect,1: Clear Enhanced Rx FIFO content" rbitfld.long 0x8 17. "ERFE,Enhanced Rx FIFO empty" "0: Enhanced Rx FIFO is not empty,1: Enhanced Rx FIFO is empty" newline rbitfld.long 0x8 16. "ERFF,Enhanced Rx FIFO full" "0: Enhanced Rx FIFO is not full,1: Enhanced Rx FIFO is full" hexmask.long.byte 0x8 0.--5. 1. "ERFEL,Enhanced Rx FIFO Elements" repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC30)++0x3 line.long 0x0 "HR_TIME_STAMP[$1],High Resolution Time Stamp" hexmask.long 0x0 0.--31. 1. "TS,High Resolution Time Stamp" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x3000)++0x3 line.long 0x0 "ERFFEL[$1],Enhanced Rx FIFO Filter Element" hexmask.long 0x0 0.--31. 1. "FEL,Filter Element Bits" repeat.end tree.end tree "CAN4" base ad:0x427C0000 group.long 0x0++0xB line.long 0x0 "MCR,Module Configuration Register" bitfld.long 0x0 31. "MDIS,Module Disable" "0: Enable the FlexCAN module.,1: Disable the FlexCAN module." bitfld.long 0x0 30. "FRZ,Freeze Enable" "0: Not enabled to enter Freeze mode.,1: Enabled to enter Freeze mode." newline bitfld.long 0x0 29. "RFEN,Legacy Rx FIFO Enable" "0: Legacy Rx FIFO not enabled.,1: Legacy Rx FIFO enabled." bitfld.long 0x0 28. "HALT,Halt FlexCAN" "0: No Freeze mode request.,1: Enters Freeze mode if the FRZ bit is asserted." newline rbitfld.long 0x0 27. "NOTRDY,FlexCAN Not Ready" "0: FlexCAN module is either in Normal mode..,1: FlexCAN module is either in Disable mode Doze.." bitfld.long 0x0 26. "WAKMSK,Wake Up Interrupt Mask" "0: Wake Up interrupt is disabled.,1: Wake Up interrupt is enabled." newline bitfld.long 0x0 25. "SOFTRST,Soft Reset" "0: No reset request.,1: Resets the registers affected by soft reset." rbitfld.long 0x0 24. "FRZACK,Freeze Mode Acknowledge" "0: FlexCAN not in Freeze mode prescaler running.,1: FlexCAN in Freeze mode prescaler stopped." newline bitfld.long 0x0 23. "SUPV,Supervisor Mode" "0: FlexCAN is in User mode. Affected registers..,1: FlexCAN is in Supervisor mode. Affected.." bitfld.long 0x0 22. "SLFWAK,Self Wake Up" "0: FlexCAN Self Wake Up feature is disabled.,1: FlexCAN Self Wake Up feature is enabled." newline bitfld.long 0x0 21. "WRNEN,Warning Interrupt Enable" "0: TWRNINT and RWRNINT bits are zero independent of..,1: TWRNINT and RWRNINT bits are set when the.." rbitfld.long 0x0 20. "LPMACK,Low-Power Mode Acknowledge" "0: FlexCAN is not in a low-power mode.,1: FlexCAN is in a low-power mode." newline bitfld.long 0x0 19. "WAKSRC,Wake Up Source" "0: FlexCAN uses the unfiltered Rx input to detect..,1: FlexCAN uses the filtered Rx input to detect.." bitfld.long 0x0 18. "DOZE,Doze Mode Enable" "0: FlexCAN is not enabled to enter low-power mode..,1: FlexCAN is enabled to enter low-power mode when.." newline bitfld.long 0x0 17. "SRXDIS,Self Reception Disable" "0: Self-reception enabled.,1: Self-reception disabled." bitfld.long 0x0 16. "IRMQ,Individual Rx Masking And Queue Enable" "0: Individual Rx masking and queue feature are..,1: Individual Rx masking and queue feature are.." newline bitfld.long 0x0 15. "DMA,DMA Enable" "0: DMA feature for Legacy RX FIFO or Enhanced Rx..,1: DMA feature for Legacy RX FIFO or Enhanced Rx.." bitfld.long 0x0 13. "LPRIOEN,Local Priority Enable" "0: Local Priority disabled.,1: Local Priority enabled." newline bitfld.long 0x0 12. "AEN,Abort Enable" "0: Abort disabled.,1: Abort enabled." bitfld.long 0x0 11. "FDEN,CAN FD operation enable" "0: CAN FD is disabled. FlexCAN is able to receive..,1: CAN FD is enabled. FlexCAN is able to receive.." newline bitfld.long 0x0 8.--9. "IDAM,ID Acceptance Mode" "0: Format A: One full ID (standard and extended)..,1: Format B: Two full standard IDs or two partial..,2: Format C: Four partial 8-bit standard IDs per ID..,3: Format D: All frames rejected." hexmask.long.byte 0x0 0.--6. 1. "MAXMB,Number Of The Last Message Buffer" line.long 0x4 "CTRL1,Control 1 Register" hexmask.long.byte 0x4 24.--31. 1. "PRESDIV,Prescaler Division Factor" bitfld.long 0x4 22.--23. "RJW,Resync Jump Width" "0,1,2,3" newline bitfld.long 0x4 19.--21. "PSEG1,Phase Segment 1" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PSEG2,Phase Segment 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 15. "BOFFMSK,Bus Off Interrupt Mask" "0: Bus Off interrupt disabled.,1: Bus Off interrupt enabled." bitfld.long 0x4 14. "ERRMSK,Error Interrupt Mask" "0: Error interrupt disabled.,1: Error interrupt enabled." newline bitfld.long 0x4 13. "CLKSRC,CAN Engine Clock Source" "0: The CAN engine clock source is the oscillator..,1: The CAN engine clock source is the peripheral.." bitfld.long 0x4 12. "LPB,Loop Back Mode" "0: Loop Back disabled.,1: Loop Back enabled." newline bitfld.long 0x4 11. "TWRNMSK,Tx Warning Interrupt Mask" "0: Tx Warning interrupt disabled.,1: Tx Warning interrupt enabled." bitfld.long 0x4 10. "RWRNMSK,Rx Warning Interrupt Mask" "0: Rx Warning interrupt disabled.,1: Rx Warning interrupt enabled." newline bitfld.long 0x4 7. "SMP,CAN Bit Sampling" "0: Just one sample is used to determine the bit..,1: Three samples are used to determine the value of.." bitfld.long 0x4 6. "BOFFREC,Bus Off Recovery" "0: Automatic recovering from Bus Off state enabled.,1: Automatic recovering from Bus Off state disabled." newline bitfld.long 0x4 5. "TSYN,Timer Sync" "0: Timer sync feature disabled,1: Timer sync feature enabled" bitfld.long 0x4 4. "LBUF,Lowest Buffer Transmitted First" "0: Buffer with highest priority is transmitted first.,1: Lowest number buffer is transmitted first." newline bitfld.long 0x4 3. "LOM,Listen-Only Mode" "0: Listen-Only mode is deactivated.,1: FlexCAN module operates in Listen-Only mode." bitfld.long 0x4 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7" line.long 0x8 "TIMER,Free Running Timer" hexmask.long.word 0x8 0.--15. 1. "TIMER,Timer Value" group.long 0x10++0x27 line.long 0x0 "RXMGMASK,Rx Mailboxes Global Mask Register" hexmask.long 0x0 0.--31. 1. "MG,Rx Mailboxes Global Mask Bits" line.long 0x4 "RX14MASK,Rx 14 Mask Register" hexmask.long 0x4 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits" line.long 0x8 "RX15MASK,Rx 15 Mask Register" hexmask.long 0x8 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits" line.long 0xC "ECR,Error Counter" hexmask.long.byte 0xC 24.--31. 1. "RXERRCNT_FAST,Receive Error Counter for fast bits" hexmask.long.byte 0xC 16.--23. 1. "TXERRCNT_FAST,Transmit Error Counter for fast bits" newline hexmask.long.byte 0xC 8.--15. 1. "RXERRCNT,Receive Error Counter" hexmask.long.byte 0xC 0.--7. 1. "TXERRCNT,Transmit Error Counter" line.long 0x10 "ESR1,Error and Status 1 Register" rbitfld.long 0x10 31. "BIT1ERR_FAST,Bit1 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as recessive is received.." rbitfld.long 0x10 30. "BIT0ERR_FAST,Bit0 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." newline rbitfld.long 0x10 28. "CRCERR_FAST,Cyclic Redundancy Check Error in the CRC field of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 27. "FRMERR_FAST,Form Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A form error occurred since last read of this.." newline rbitfld.long 0x10 26. "STFERR_FAST,Stuffing Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A stuffing error occurred since last read of.." eventfld.long 0x10 21. "ERROVR,Error Overrun" "0: Overrun has not occurred.,1: Overrun has occurred." newline eventfld.long 0x10 20. "ERRINT_FAST,Error interrupt for errors detected in Data Phase of CAN FD frames with BRS bit set" "0: No such occurrence.,1: Indicates setting of any error bit detected in.." eventfld.long 0x10 19. "BOFFDONEINT,Bus Off Done Interrupt" "0: No such occurrence.,1: FlexCAN module has completed Bus Off process." newline rbitfld.long 0x10 18. "SYNCH,CAN Synchronization Status" "0: FlexCAN is not synchronized to the CAN bus.,1: FlexCAN is synchronized to the CAN bus." eventfld.long 0x10 17. "TWRNINT,Tx Warning Interrupt Flag" "0: No such occurrence.,1: The Tx error counter transitioned from less than.." newline eventfld.long 0x10 16. "RWRNINT,Rx Warning Interrupt Flag" "0: No such occurrence.,1: The Rx error counter transitioned from less than.." rbitfld.long 0x10 15. "BIT1ERR,Bit1 Error" "0: No such occurrence.,1: At least one bit sent as recessive is received.." newline rbitfld.long 0x10 14. "BIT0ERR,Bit0 Error" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." rbitfld.long 0x10 13. "ACKERR,Acknowledge Error" "0: No such occurrence.,1: An ACK error occurred since last read of this.." newline rbitfld.long 0x10 12. "CRCERR,Cyclic Redundancy Check Error" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 11. "FRMERR,Form Error" "0: No such occurrence.,1: A Form Error occurred since last read of this.." newline rbitfld.long 0x10 10. "STFERR,Stuffing Error" "0: No such occurrence.,1: A stuffing error occurred since last read of.." rbitfld.long 0x10 9. "TXWRN,TX Error Warning" "0: No such occurrence.,1: TXERRCNT is greater than or equal to 96." newline rbitfld.long 0x10 8. "RXWRN,Rx Error Warning" "0: No such occurrence.,1: RXERRCNT is greater than or equal to 96." rbitfld.long 0x10 7. "IDLE,IDLE" "0: No such occurrence.,1: CAN bus is now IDLE." newline rbitfld.long 0x10 6. "TX,FlexCAN In Transmission" "0: FlexCAN is not transmitting a message.,1: FlexCAN is transmitting a message." rbitfld.long 0x10 4.--5. "FLTCONF,Fault Confinement State" "0: Bus Off,1: Error Passive,2: Bus Off,3: Bus Off" newline rbitfld.long 0x10 3. "RX,FlexCAN In Reception" "0: FlexCAN is not receiving a message.,1: FlexCAN is receiving a message." eventfld.long 0x10 2. "BOFFINT,Bus Off Interrupt" "0: No such occurrence.,1: FlexCAN module entered Bus Off state." newline eventfld.long 0x10 1. "ERRINT,Error Interrupt" "0: No such occurrence.,1: Indicates setting of any error bit in the Error.." eventfld.long 0x10 0. "WAKINT,Wake-Up Interrupt" "0: No such occurrence.,1: Indicates a recessive to dominant transition was.." line.long 0x14 "IMASK2,Interrupt Masks 2 Register" hexmask.long 0x14 0.--31. 1. "BUF63TO32M,Buffer MBi Mask" line.long 0x18 "IMASK1,Interrupt Masks 1 Register" hexmask.long 0x18 0.--31. 1. "BUF31TO0M,Buffer MBi Mask" line.long 0x1C "IFLAG2,Interrupt Flags 2 Register" hexmask.long 0x1C 0.--31. 1. "BUF63TO32I,Buffer MBi Interrupt" line.long 0x20 "IFLAG1,Interrupt Flags 1 Register" hexmask.long.tbyte 0x20 8.--31. 1. "BUF31TO8I,Buffer MBi Interrupt" eventfld.long 0x20 7. "BUF7I,Buffer MB7 Interrupt Or Legacy Rx FIFO Overflow" "0: No occurrence of MB7 completing..,1: MB7 completed transmission/reception when.." newline eventfld.long 0x20 6. "BUF6I,Buffer MB6 Interrupt Or Legacy Rx FIFO Warning" "0: No occurrence of MB6 completing..,1: MB6 completed transmission/reception when.." eventfld.long 0x20 5. "BUF5I,Buffer MB5 Interrupt Or Frames available in Legacy Rx FIFO" "0: No occurrence of MB5 completing..,1: MB5 completed transmission/reception when.." newline hexmask.long.byte 0x20 1.--4. 1. "BUF4TO1I,Buffer MBi Interrupt Or Reserved" eventfld.long 0x20 0. "BUF0I,Buffer MB0 Interrupt Or Clear Legacy FIFO bit" "0: The corresponding buffer has no occurrence of..,1: The corresponding buffer has successfully.." line.long 0x24 "CTRL2,Control 2 Register" bitfld.long 0x24 31. "ERRMSK_FAST,Error Interrupt Mask for errors detected in the data phase of fast CAN FD frames" "0: ERRINT_FAST error interrupt disabled.,1: ERRINT_FAST error interrupt enabled." bitfld.long 0x24 30. "BOFFDONEMSK,Bus Off Done Interrupt Mask" "0: Bus off done interrupt disabled.,1: Bus off done interrupt enabled." newline bitfld.long 0x24 29. "ECRWRE,Error-correction Configuration Register Write Enable" "0: Disable update.,1: Enable update." bitfld.long 0x24 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0: Maintain the write access restrictions.,1: Enable unrestricted write access to FlexCAN.." newline hexmask.long.byte 0x24 24.--27. 1. "RFFN,Number Of Legacy Rx FIFO Filters" hexmask.long.byte 0x24 19.--23. 1. "TASD,Tx Arbitration Start Delay" newline bitfld.long 0x24 18. "MRP,Mailboxes Reception Priority" "0: Matching starts from Legacy Rx FIFO or Enhanced..,1: Matching starts from mailboxes and continues on.." bitfld.long 0x24 17. "RRS,Remote Request Storing" "0: Remote response frame is generated.,1: Remote request frame is stored." newline bitfld.long 0x24 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0: Rx mailbox filter's IDE bit is always compared..,1: Enables the comparison of both Rx mailbox.." bitfld.long 0x24 15. "TIMER_SRC,Timer Source" "0: The free running timer is clocked by the CAN bit..,1: The free running timer is clocked by an external.." newline bitfld.long 0x24 14. "PREXCEN,Protocol Exception Enable" "0: Protocol exception is disabled.,1: Protocol exception is enabled." bitfld.long 0x24 13. "BTE,Bit Timing Expansion enable" "0: CAN Bit timing expansion is disabled.,1: CAN bit timing expansion is enabled." newline bitfld.long 0x24 12. "ISOCANFDEN,ISO CAN FD Enable" "0: FlexCAN operates using the non-ISO CAN FD..,1: FlexCAN operates using the ISO CAN FD protocol.." bitfld.long 0x24 11. "EDFLTDIS,Edge Filter Disable" "0: Edge filter is enabled,1: Edge filter is disabled" newline bitfld.long 0x24 8.--9. "MBTSBASE,Message Buffer Time Stamp Base" "0: Message buffer time stamp base is TIMER,1: Message buffer time stamp base is lower 16 bits..,2: Message buffer time stamp base is upper 16 bits..,?" bitfld.long 0x24 6.--7. "TSTAMPCAP,Time Stamp Capture Point" "0: The high resolution time stamp capture is disabled,1: The high resolution time stamp is captured in..,2: The high resolution time stamp is captured in..,3: The high resolution time stamp is captured in.." rgroup.long 0x38++0x3 line.long 0x0 "ESR2,Error and Status 2 Register" hexmask.long.byte 0x0 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox" bitfld.long 0x0 14. "VPS,Valid Priority Status" "0: Contents of IMB and LPTM are invalid.,1: Contents of IMB and LPTM are valid." newline bitfld.long 0x0 13. "IMB,Inactive Mailbox" "0: If ESR2[VPS] is asserted the ESR2[LPTM] is not..,1: If ESR2[VPS] is asserted there is at least one.." rgroup.long 0x44++0x3 line.long 0x0 "CRCR,CRC Register" hexmask.long.byte 0x0 16.--22. 1. "MBCRC,CRC Mailbox" hexmask.long.word 0x0 0.--14. 1. "TXCRC,Transmitted CRC value" group.long 0x48++0x3 line.long 0x0 "RXFGMASK,Legacy Rx FIFO Global Mask Register" hexmask.long 0x0 0.--31. 1. "FGM,Legacy Rx FIFO Global Mask Bits" rgroup.long 0x4C++0x3 line.long 0x0 "RXFIR,Legacy Rx FIFO Information Register" hexmask.long.word 0x0 0.--8. 1. "IDHIT,Identifier Acceptance Filter Hit Indicator" group.long 0x50++0x3 line.long 0x0 "CBT,CAN Bit Timing Register" bitfld.long 0x0 31. "BTF,Bit Timing Format Enable" "0: Extended bit time definitions disabled.,1: Extended bit time definitions enabled." hexmask.long.word 0x0 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor" newline hexmask.long.byte 0x0 16.--20. 1. "ERJW,Extended Resync Jump Width" hexmask.long.byte 0x0 10.--15. 1. "EPROPSEG,Extended Propagation Segment" newline hexmask.long.byte 0x0 5.--9. 1. "EPSEG1,Extended Phase Segment 1" hexmask.long.byte 0x0 0.--4. 1. "EPSEG2,Extended Phase Segment 2" group.long 0x6C++0x3 line.long 0x0 "IMASK3,Interrupt Masks 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64M,Buffer MBi Mask" group.long 0x74++0x3 line.long 0x0 "IFLAG3,Interrupt Flags 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64,Buffer MBi Interrupt" group.long 0x80++0x3 line.long 0x0 "CS0,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_16B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_32B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_64B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x7 line.long 0x0 "MB0_8B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID0,Message Buffer 0 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_16B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_32B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_64B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x7 line.long 0x0 "MB0_8B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_16B_WORD0,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_32B_WORD0,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_64B_WORD0,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_8B_WORD0,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x7 line.long 0x0 "WORD00,Message Buffer 0 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_16B_WORD1,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_32B_WORD1,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_64B_WORD1,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_8B_WORD1,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x7 line.long 0x0 "WORD10,Message Buffer 0 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS1,Message Buffer 1 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x90++0x3 line.long 0x0 "MB0_16B_WORD2,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_32B_WORD2,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_64B_WORD2,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x7 line.long 0x0 "MB1_8B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID1,Message Buffer 1 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x94++0x3 line.long 0x0 "MB0_16B_WORD3,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_32B_WORD3,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_64B_WORD3,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x7 line.long 0x0 "MB1_8B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_32B_WORD4,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB0_64B_WORD4,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB1_16B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x98++0x3 line.long 0x0 "MB1_8B_WORD0,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x98++0x7 line.long 0x0 "WORD01,Message Buffer 1 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_32B_WORD5,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB0_64B_WORD5,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB1_16B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x9C++0x3 line.long 0x0 "MB1_8B_WORD1,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x7 line.long 0x0 "WORD11,Message Buffer 1 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS2,Message Buffer 2 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA0++0x3 line.long 0x0 "MB0_32B_WORD6,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB0_64B_WORD6,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB1_16B_WORD0,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x7 line.long 0x0 "MB2_8B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID2,Message Buffer 2 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xA4++0x3 line.long 0x0 "MB0_32B_WORD7,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB0_64B_WORD7,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB1_16B_WORD1,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x7 line.long 0x0 "MB2_8B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD8,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_16B_WORD2,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_32B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA8++0x3 line.long 0x0 "MB2_8B_WORD0,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x7 line.long 0x0 "WORD02,Message Buffer 2 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD9,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_16B_WORD3,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_32B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xAC++0x3 line.long 0x0 "MB2_8B_WORD1,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x7 line.long 0x0 "WORD12,Message Buffer 2 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS3,Message Buffer 3 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x3 line.long 0x0 "MB0_64B_WORD10,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB1_32B_WORD0,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB2_16B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x7 line.long 0x0 "MB3_8B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID3,Message Buffer 3 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x3 line.long 0x0 "MB0_64B_WORD11,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB1_32B_WORD1,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB2_16B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x7 line.long 0x0 "MB3_8B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD12,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB1_32B_WORD2,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB2_16B_WORD0,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB3_8B_WORD0,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x7 line.long 0x0 "WORD03,Message Buffer 3 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD13,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB1_32B_WORD3,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB2_16B_WORD1,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB3_8B_WORD1,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x7 line.long 0x0 "WORD13,Message Buffer 3 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS4,Message Buffer 4 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC0++0x3 line.long 0x0 "MB0_64B_WORD14,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB1_32B_WORD4,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB2_16B_WORD2,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x7 line.long 0x0 "MB4_8B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID4,Message Buffer 4 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xC4++0x3 line.long 0x0 "MB0_64B_WORD15,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB1_32B_WORD5,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB2_16B_WORD3,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x7 line.long 0x0 "MB4_8B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_32B_WORD6,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x3 line.long 0x0 "MB1_64B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB3_16B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB4_8B_WORD0,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x7 line.long 0x0 "WORD04,Message Buffer 4 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_32B_WORD7,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x3 line.long 0x0 "MB1_64B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB3_16B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB4_8B_WORD1,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x7 line.long 0x0 "WORD14,Message Buffer 4 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS5,Message Buffer 5 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB1_64B_WORD0,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x3 line.long 0x0 "MB2_32B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB3_16B_WORD0,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x7 line.long 0x0 "MB5_8B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID5,Message Buffer 5 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB1_64B_WORD1,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x3 line.long 0x0 "MB2_32B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB3_16B_WORD1,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x7 line.long 0x0 "MB5_8B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD2,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB2_32B_WORD0,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB3_16B_WORD2,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB5_8B_WORD0,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x7 line.long 0x0 "WORD05,Message Buffer 5 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD3,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB2_32B_WORD1,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB3_16B_WORD3,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB5_8B_WORD1,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x7 line.long 0x0 "WORD15,Message Buffer 5 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS6,Message Buffer 6 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x3 line.long 0x0 "MB1_64B_WORD4,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB2_32B_WORD2,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB4_16B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x7 line.long 0x0 "MB6_8B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID6,Message Buffer 6 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x3 line.long 0x0 "MB1_64B_WORD5,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB2_32B_WORD3,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB4_16B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x7 line.long 0x0 "MB6_8B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD6,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB2_32B_WORD4,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB4_16B_WORD0,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB6_8B_WORD0,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x7 line.long 0x0 "WORD06,Message Buffer 6 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD7,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB2_32B_WORD5,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB4_16B_WORD1,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB6_8B_WORD1,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x7 line.long 0x0 "WORD16,Message Buffer 6 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS7,Message Buffer 7 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF0++0x3 line.long 0x0 "MB1_64B_WORD8,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB2_32B_WORD6,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB4_16B_WORD2,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x7 line.long 0x0 "MB7_8B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID7,Message Buffer 7 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xF4++0x3 line.long 0x0 "MB1_64B_WORD9,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB2_32B_WORD7,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB4_16B_WORD3,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x7 line.long 0x0 "MB7_8B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD10,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x3 line.long 0x0 "MB3_32B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB5_16B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB7_8B_WORD0,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x7 line.long 0x0 "WORD07,Message Buffer 7 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD11,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x3 line.long 0x0 "MB3_32B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB5_16B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB7_8B_WORD1,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x7 line.long 0x0 "WORD17,Message Buffer 7 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS8,Message Buffer 8 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x100++0x3 line.long 0x0 "MB1_64B_WORD12,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB3_32B_WORD0,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB5_16B_WORD0,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x7 line.long 0x0 "MB8_8B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID8,Message Buffer 8 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x104++0x3 line.long 0x0 "MB1_64B_WORD13,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB3_32B_WORD1,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB5_16B_WORD1,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x7 line.long 0x0 "MB8_8B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD14,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB3_32B_WORD2,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB5_16B_WORD2,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB8_8B_WORD0,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x108++0x7 line.long 0x0 "WORD08,Message Buffer 8 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD15,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB3_32B_WORD3,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB5_16B_WORD3,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB8_8B_WORD1,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x7 line.long 0x0 "WORD18,Message Buffer 8 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS9,Message Buffer 9 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB2_64B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB3_32B_WORD4,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x110++0x3 line.long 0x0 "MB6_16B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x7 line.long 0x0 "MB9_8B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID9,Message Buffer 9 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB2_64B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB3_32B_WORD5,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x114++0x3 line.long 0x0 "MB6_16B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x7 line.long 0x0 "MB9_8B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB2_64B_WORD0,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB3_32B_WORD6,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB6_16B_WORD0,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB9_8B_WORD0,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x7 line.long 0x0 "WORD09,Message Buffer 9 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB2_64B_WORD1,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB3_32B_WORD7,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB6_16B_WORD1,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB9_8B_WORD1,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x7 line.long 0x0 "WORD19,Message Buffer 9 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS10,Message Buffer 10 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB10_8B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB2_64B_WORD2,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x120++0x3 line.long 0x0 "MB4_32B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x7 line.long 0x0 "MB6_16B_WORD2,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID10,Message Buffer 10 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB10_8B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB2_64B_WORD3,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x124++0x3 line.long 0x0 "MB4_32B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x7 line.long 0x0 "MB6_16B_WORD3,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD0,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB2_64B_WORD4,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB4_32B_WORD0,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB7_16B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x128++0x7 line.long 0x0 "WORD010,Message Buffer 10 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD1,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB2_64B_WORD5,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB4_32B_WORD1,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB7_16B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x12C++0x7 line.long 0x0 "WORD110,Message Buffer 10 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS11,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB11_8B_CS,Message Buffer 11 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB2_64B_WORD6,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x130++0x3 line.long 0x0 "MB4_32B_WORD2,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x130++0x7 line.long 0x0 "MB7_16B_WORD0,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID11,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB11_8B_ID,Message Buffer 11 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB2_64B_WORD7,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x134++0x3 line.long 0x0 "MB4_32B_WORD3,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x134++0x7 line.long 0x0 "MB7_16B_WORD1,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD0,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB2_64B_WORD8,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB4_32B_WORD4,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB7_16B_WORD2,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x138++0x7 line.long 0x0 "WORD011,Message Buffer 11 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD1,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB2_64B_WORD9,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB4_32B_WORD5,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB7_16B_WORD3,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x7 line.long 0x0 "WORD111,Message Buffer 11 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS12,Message Buffer 12 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB12_8B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB2_64B_WORD10,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x140++0x3 line.long 0x0 "MB4_32B_WORD6,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x140++0x7 line.long 0x0 "MB8_16B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID12,Message Buffer 12 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB12_8B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB2_64B_WORD11,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x144++0x3 line.long 0x0 "MB4_32B_WORD7,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x144++0x7 line.long 0x0 "MB8_16B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_8B_WORD0,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB2_64B_WORD12,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB5_32B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x148++0x3 line.long 0x0 "MB8_16B_WORD0,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x7 line.long 0x0 "WORD012,Message Buffer 12 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_8B_WORD1,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB2_64B_WORD13,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB5_32B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x14C++0x3 line.long 0x0 "MB8_16B_WORD1,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x7 line.long 0x0 "WORD112,Message Buffer 12 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS13,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB13_8B_CS,Message Buffer 13 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB2_64B_WORD14,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x150++0x3 line.long 0x0 "MB5_32B_WORD0,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x150++0x7 line.long 0x0 "MB8_16B_WORD2,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID13,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB13_8B_ID,Message Buffer 13 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB2_64B_WORD15,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x154++0x3 line.long 0x0 "MB5_32B_WORD1,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x154++0x7 line.long 0x0 "MB8_16B_WORD3,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD0,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB3_64B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x3 line.long 0x0 "MB5_32B_WORD2,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB9_16B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x7 line.long 0x0 "WORD013,Message Buffer 13 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD1,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB3_64B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x3 line.long 0x0 "MB5_32B_WORD3,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB9_16B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x7 line.long 0x0 "WORD113,Message Buffer 13 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS14,Message Buffer 14 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB14_8B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB3_64B_WORD0,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x160++0x3 line.long 0x0 "MB5_32B_WORD4,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x160++0x7 line.long 0x0 "MB9_16B_WORD0,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID14,Message Buffer 14 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB14_8B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB3_64B_WORD1,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x164++0x3 line.long 0x0 "MB5_32B_WORD5,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x164++0x7 line.long 0x0 "MB9_16B_WORD1,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD0,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB3_64B_WORD2,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB5_32B_WORD6,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB9_16B_WORD2,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x7 line.long 0x0 "WORD014,Message Buffer 14 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD1,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB3_64B_WORD3,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB5_32B_WORD7,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB9_16B_WORD3,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x7 line.long 0x0 "WORD114,Message Buffer 14 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS15,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB10_16B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB15_8B_CS,Message Buffer 15 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB3_64B_WORD4,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x170++0x7 line.long 0x0 "MB6_32B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID15,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB10_16B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB15_8B_ID,Message Buffer 15 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB3_64B_WORD5,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x174++0x7 line.long 0x0 "MB6_32B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_16B_WORD0,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB15_8B_WORD0,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB3_64B_WORD6,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB6_32B_WORD0,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x7 line.long 0x0 "WORD015,Message Buffer 15 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_16B_WORD1,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB15_8B_WORD1,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB3_64B_WORD7,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB6_32B_WORD1,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x7 line.long 0x0 "WORD115,Message Buffer 15 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS16,Message Buffer 16 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB10_16B_WORD2,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x180++0x3 line.long 0x0 "MB16_8B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB3_64B_WORD8,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x180++0x7 line.long 0x0 "MB6_32B_WORD2,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID16,Message Buffer 16 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB10_16B_WORD3,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x184++0x3 line.long 0x0 "MB16_8B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB3_64B_WORD9,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x184++0x7 line.long 0x0 "MB6_32B_WORD3,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x188++0x3 line.long 0x0 "MB16_8B_WORD0,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB3_64B_WORD10,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB6_32B_WORD4,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x188++0x7 line.long 0x0 "WORD016,Message Buffer 16 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x18C++0x3 line.long 0x0 "MB16_8B_WORD1,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB3_64B_WORD11,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB6_32B_WORD5,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x7 line.long 0x0 "WORD116,Message Buffer 16 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS17,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB11_16B_WORD0,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x190++0x3 line.long 0x0 "MB17_8B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB3_64B_WORD12,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x190++0x7 line.long 0x0 "MB6_32B_WORD6,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID17,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB11_16B_WORD1,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x194++0x3 line.long 0x0 "MB17_8B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB3_64B_WORD13,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x194++0x7 line.long 0x0 "MB6_32B_WORD7,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD2,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB17_8B_WORD0,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB3_64B_WORD14,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB7_32B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x198++0x7 line.long 0x0 "WORD017,Message Buffer 17 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD3,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB17_8B_WORD1,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB3_64B_WORD15,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB7_32B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x19C++0x7 line.long 0x0 "WORD117,Message Buffer 17 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS18,Message Buffer 18 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB12_16B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB18_8B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB4_64B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x7 line.long 0x0 "MB7_32B_WORD0,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID18,Message Buffer 18 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB12_16B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB18_8B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB4_64B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x7 line.long 0x0 "MB7_32B_WORD1,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD0,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB18_8B_WORD0,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB4_64B_WORD0,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB7_32B_WORD2,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x7 line.long 0x0 "WORD018,Message Buffer 18 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD1,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB18_8B_WORD1,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB4_64B_WORD1,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB7_32B_WORD3,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x7 line.long 0x0 "WORD118,Message Buffer 18 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS19,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB12_16B_WORD2,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x3 line.long 0x0 "MB19_8B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB4_64B_WORD2,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x7 line.long 0x0 "MB7_32B_WORD4,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID19,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB12_16B_WORD3,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x3 line.long 0x0 "MB19_8B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB4_64B_WORD3,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x7 line.long 0x0 "MB7_32B_WORD5,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B8++0x3 line.long 0x0 "MB19_8B_WORD0,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB4_64B_WORD4,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB7_32B_WORD6,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x7 line.long 0x0 "WORD019,Message Buffer 19 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1BC++0x3 line.long 0x0 "MB19_8B_WORD1,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB4_64B_WORD5,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB7_32B_WORD7,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x7 line.long 0x0 "WORD119,Message Buffer 19 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS20,Message Buffer 20 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB13_16B_WORD0,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x3 line.long 0x0 "MB20_8B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB4_64B_WORD6,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x7 line.long 0x0 "MB8_32B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID20,Message Buffer 20 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB13_16B_WORD1,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x3 line.long 0x0 "MB20_8B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB4_64B_WORD7,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x7 line.long 0x0 "MB8_32B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_16B_WORD2,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB20_8B_WORD0,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB4_64B_WORD8,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB8_32B_WORD0,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x7 line.long 0x0 "WORD020,Message Buffer 20 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_WORD3,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB20_8B_WORD1,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB4_64B_WORD9,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB8_32B_WORD1,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x7 line.long 0x0 "WORD120,Message Buffer 20 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS21,Message Buffer 21 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB14_16B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB21_8B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB4_64B_WORD10,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x1D0++0x7 line.long 0x0 "MB8_32B_WORD2,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID21,Message Buffer 21 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB14_16B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB21_8B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB4_64B_WORD11,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x1D4++0x7 line.long 0x0 "MB8_32B_WORD3,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD0,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB21_8B_WORD0,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB4_64B_WORD12,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB8_32B_WORD4,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x7 line.long 0x0 "WORD021,Message Buffer 21 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD1,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB21_8B_WORD1,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB4_64B_WORD13,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB8_32B_WORD5,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x7 line.long 0x0 "WORD121,Message Buffer 21 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS22,Message Buffer 22 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB14_16B_WORD2,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x3 line.long 0x0 "MB22_8B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB4_64B_WORD14,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x7 line.long 0x0 "MB8_32B_WORD6,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID22,Message Buffer 22 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB14_16B_WORD3,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x3 line.long 0x0 "MB22_8B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB4_64B_WORD15,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x7 line.long 0x0 "MB8_32B_WORD7,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB22_8B_WORD0,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1E8++0x3 line.long 0x0 "MB5_64B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB9_32B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x7 line.long 0x0 "WORD022,Message Buffer 22 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB22_8B_WORD1,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1EC++0x3 line.long 0x0 "MB5_64B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB9_32B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x7 line.long 0x0 "WORD122,Message Buffer 22 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS23,Message Buffer 23 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB15_16B_WORD0,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x3 line.long 0x0 "MB23_8B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB5_64B_WORD0,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x7 line.long 0x0 "MB9_32B_WORD0,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID23,Message Buffer 23 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB15_16B_WORD1,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x3 line.long 0x0 "MB23_8B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB5_64B_WORD1,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x7 line.long 0x0 "MB9_32B_WORD1,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD2,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB23_8B_WORD0,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB5_64B_WORD2,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB9_32B_WORD2,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x7 line.long 0x0 "WORD023,Message Buffer 23 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD3,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB23_8B_WORD1,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB5_64B_WORD3,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB9_32B_WORD3,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x7 line.long 0x0 "WORD123,Message Buffer 23 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS24,Message Buffer 24 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB16_16B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB24_8B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB5_64B_WORD4,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x200++0x7 line.long 0x0 "MB9_32B_WORD4,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID24,Message Buffer 24 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB16_16B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB24_8B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB5_64B_WORD5,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x204++0x7 line.long 0x0 "MB9_32B_WORD5,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD0,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB24_8B_WORD0,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB5_64B_WORD6,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB9_32B_WORD6,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x7 line.long 0x0 "WORD024,Message Buffer 24 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD1,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB24_8B_WORD1,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB5_64B_WORD7,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB9_32B_WORD7,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x7 line.long 0x0 "WORD124,Message Buffer 24 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS25,Message Buffer 25 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB10_32B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB16_16B_WORD2,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x210++0x3 line.long 0x0 "MB25_8B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x7 line.long 0x0 "MB5_64B_WORD8,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID25,Message Buffer 25 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB10_32B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB16_16B_WORD3,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x214++0x3 line.long 0x0 "MB25_8B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x7 line.long 0x0 "MB5_64B_WORD9,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD0,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB17_16B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x218++0x3 line.long 0x0 "MB25_8B_WORD0,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB5_64B_WORD10,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x218++0x7 line.long 0x0 "WORD025,Message Buffer 25 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD1,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB17_16B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x21C++0x3 line.long 0x0 "MB25_8B_WORD1,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB5_64B_WORD11,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x7 line.long 0x0 "WORD125,Message Buffer 25 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS26,Message Buffer 26 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x3 line.long 0x0 "MB10_32B_WORD2,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB17_16B_WORD0,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB26_8B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x7 line.long 0x0 "MB5_64B_WORD12,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID26,Message Buffer 26 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x3 line.long 0x0 "MB10_32B_WORD3,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB17_16B_WORD1,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB26_8B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x7 line.long 0x0 "MB5_64B_WORD13,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD4,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB17_16B_WORD2,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB26_8B_WORD0,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB5_64B_WORD14,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x228++0x7 line.long 0x0 "WORD026,Message Buffer 26 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD5,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB17_16B_WORD3,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB26_8B_WORD1,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB5_64B_WORD15,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x7 line.long 0x0 "WORD126,Message Buffer 26 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS27,Message Buffer 27 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB10_32B_WORD6,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x230++0x3 line.long 0x0 "MB18_16B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB27_8B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x7 line.long 0x0 "MB6_64B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID27,Message Buffer 27 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB10_32B_WORD7,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x234++0x3 line.long 0x0 "MB18_16B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB27_8B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x7 line.long 0x0 "MB6_64B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_32B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x238++0x3 line.long 0x0 "MB18_16B_WORD0,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB27_8B_WORD0,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB6_64B_WORD0,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x7 line.long 0x0 "WORD027,Message Buffer 27 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x23C++0x3 line.long 0x0 "MB18_16B_WORD1,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB27_8B_WORD1,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB6_64B_WORD1,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x7 line.long 0x0 "WORD127,Message Buffer 27 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS28,Message Buffer 28 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x3 line.long 0x0 "MB11_32B_WORD0,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB18_16B_WORD2,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB28_8B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x7 line.long 0x0 "MB6_64B_WORD2,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID28,Message Buffer 28 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x3 line.long 0x0 "MB11_32B_WORD1,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB18_16B_WORD3,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB28_8B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x7 line.long 0x0 "MB6_64B_WORD3,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD2,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB19_16B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x248++0x3 line.long 0x0 "MB28_8B_WORD0,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB6_64B_WORD4,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x248++0x7 line.long 0x0 "WORD028,Message Buffer 28 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD3,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB19_16B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x24C++0x3 line.long 0x0 "MB28_8B_WORD1,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB6_64B_WORD5,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x7 line.long 0x0 "WORD128,Message Buffer 28 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS29,Message Buffer 29 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x3 line.long 0x0 "MB11_32B_WORD4,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB19_16B_WORD0,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB29_8B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x7 line.long 0x0 "MB6_64B_WORD6,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID29,Message Buffer 29 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x3 line.long 0x0 "MB11_32B_WORD5,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB19_16B_WORD1,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB29_8B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x7 line.long 0x0 "MB6_64B_WORD7,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD6,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB19_16B_WORD2,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB29_8B_WORD0,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB6_64B_WORD8,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x258++0x7 line.long 0x0 "WORD029,Message Buffer 29 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD7,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB19_16B_WORD3,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB29_8B_WORD1,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB6_64B_WORD9,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x7 line.long 0x0 "WORD129,Message Buffer 29 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS30,Message Buffer 30 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB12_32B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB20_16B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB30_8B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x7 line.long 0x0 "MB6_64B_WORD10,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID30,Message Buffer 30 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB12_32B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB20_16B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB30_8B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x7 line.long 0x0 "MB6_64B_WORD11,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD0,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB20_16B_WORD0,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB30_8B_WORD0,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB6_64B_WORD12,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x268++0x7 line.long 0x0 "WORD030,Message Buffer 30 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD1,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB20_16B_WORD1,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB30_8B_WORD1,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB6_64B_WORD13,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x7 line.long 0x0 "WORD130,Message Buffer 30 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS31,Message Buffer 31 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x3 line.long 0x0 "MB12_32B_WORD2,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB20_16B_WORD2,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB31_8B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x7 line.long 0x0 "MB6_64B_WORD14,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID31,Message Buffer 31 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x3 line.long 0x0 "MB12_32B_WORD3,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB20_16B_WORD3,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB31_8B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x7 line.long 0x0 "MB6_64B_WORD15,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD4,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB21_16B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x3 line.long 0x0 "MB31_8B_WORD0,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB7_64B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x7 line.long 0x0 "WORD031,Message Buffer 31 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD5,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB21_16B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x3 line.long 0x0 "MB31_8B_WORD1,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB7_64B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x7 line.long 0x0 "WORD131,Message Buffer 31 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS32,Message Buffer 32 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x3 line.long 0x0 "MB12_32B_WORD6,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB21_16B_WORD0,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB32_8B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x7 line.long 0x0 "MB7_64B_WORD0,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID32,Message Buffer 32 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x3 line.long 0x0 "MB12_32B_WORD7,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB21_16B_WORD1,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB32_8B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x7 line.long 0x0 "MB7_64B_WORD1,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x288++0x3 line.long 0x0 "MB21_16B_WORD2,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB32_8B_WORD0,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB7_64B_WORD2,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x7 line.long 0x0 "WORD032,Message Buffer 32 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x28C++0x3 line.long 0x0 "MB21_16B_WORD3,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB32_8B_WORD1,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB7_64B_WORD3,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x7 line.long 0x0 "WORD132,Message Buffer 32 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS33,Message Buffer 33 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB13_32B_WORD0,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x290++0x3 line.long 0x0 "MB22_16B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB33_8B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x7 line.long 0x0 "MB7_64B_WORD4,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID33,Message Buffer 33 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB13_32B_WORD1,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x294++0x3 line.long 0x0 "MB22_16B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB33_8B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x7 line.long 0x0 "MB7_64B_WORD5,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD2,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB22_16B_WORD0,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB33_8B_WORD0,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB7_64B_WORD6,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x298++0x7 line.long 0x0 "WORD033,Message Buffer 33 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD3,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB22_16B_WORD1,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB33_8B_WORD1,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB7_64B_WORD7,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x7 line.long 0x0 "WORD133,Message Buffer 33 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS34,Message Buffer 34 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x3 line.long 0x0 "MB13_32B_WORD4,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB22_16B_WORD2,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB34_8B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x7 line.long 0x0 "MB7_64B_WORD8,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID34,Message Buffer 34 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x3 line.long 0x0 "MB13_32B_WORD5,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB22_16B_WORD3,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB34_8B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x7 line.long 0x0 "MB7_64B_WORD9,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD6,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB23_16B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A8++0x3 line.long 0x0 "MB34_8B_WORD0,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB7_64B_WORD10,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x7 line.long 0x0 "WORD034,Message Buffer 34 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD7,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB23_16B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2AC++0x3 line.long 0x0 "MB34_8B_WORD1,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB7_64B_WORD11,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x7 line.long 0x0 "WORD134,Message Buffer 34 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS35,Message Buffer 35 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB14_32B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB23_16B_WORD0,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B0++0x3 line.long 0x0 "MB35_8B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x7 line.long 0x0 "MB7_64B_WORD12,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID35,Message Buffer 35 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB14_32B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB23_16B_WORD1,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2B4++0x3 line.long 0x0 "MB35_8B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x7 line.long 0x0 "MB7_64B_WORD13,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD0,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB23_16B_WORD2,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB35_8B_WORD0,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB7_64B_WORD14,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x7 line.long 0x0 "WORD035,Message Buffer 35 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD1,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB23_16B_WORD3,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB35_8B_WORD1,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB7_64B_WORD15,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x7 line.long 0x0 "WORD135,Message Buffer 35 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS36,Message Buffer 36 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB14_32B_WORD2,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2C0++0x3 line.long 0x0 "MB24_16B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB36_8B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x7 line.long 0x0 "MB8_64B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID36,Message Buffer 36 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB14_32B_WORD3,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2C4++0x3 line.long 0x0 "MB24_16B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB36_8B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x7 line.long 0x0 "MB8_64B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_32B_WORD4,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB24_16B_WORD0,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB36_8B_WORD0,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB8_64B_WORD0,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x7 line.long 0x0 "WORD036,Message Buffer 36 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD5,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB24_16B_WORD1,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB36_8B_WORD1,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB8_64B_WORD1,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x7 line.long 0x0 "WORD136,Message Buffer 36 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS37,Message Buffer 37 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x3 line.long 0x0 "MB14_32B_WORD6,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB24_16B_WORD2,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB37_8B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x7 line.long 0x0 "MB8_64B_WORD2,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID37,Message Buffer 37 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x3 line.long 0x0 "MB14_32B_WORD7,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB24_16B_WORD3,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB37_8B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x7 line.long 0x0 "MB8_64B_WORD3,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB25_16B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB37_8B_WORD0,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x3 line.long 0x0 "MB8_64B_WORD4,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x7 line.long 0x0 "WORD037,Message Buffer 37 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB25_16B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB37_8B_WORD1,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x3 line.long 0x0 "MB8_64B_WORD5,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x7 line.long 0x0 "WORD137,Message Buffer 37 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS38,Message Buffer 38 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x3 line.long 0x0 "MB15_32B_WORD0,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB25_16B_WORD0,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB38_8B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x7 line.long 0x0 "MB8_64B_WORD6,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID38,Message Buffer 38 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x3 line.long 0x0 "MB15_32B_WORD1,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB25_16B_WORD1,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB38_8B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x7 line.long 0x0 "MB8_64B_WORD7,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD2,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB25_16B_WORD2,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB38_8B_WORD0,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB8_64B_WORD8,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x7 line.long 0x0 "WORD038,Message Buffer 38 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD3,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB25_16B_WORD3,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB38_8B_WORD1,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB8_64B_WORD9,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x7 line.long 0x0 "WORD138,Message Buffer 38 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS39,Message Buffer 39 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB15_32B_WORD4,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2F0++0x3 line.long 0x0 "MB26_16B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB39_8B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x7 line.long 0x0 "MB8_64B_WORD10,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID39,Message Buffer 39 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB15_32B_WORD5,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2F4++0x3 line.long 0x0 "MB26_16B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB39_8B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x7 line.long 0x0 "MB8_64B_WORD11,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD6,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB26_16B_WORD0,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB39_8B_WORD0,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB8_64B_WORD12,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x7 line.long 0x0 "WORD039,Message Buffer 39 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD7,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB26_16B_WORD1,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB39_8B_WORD1,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB8_64B_WORD13,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x7 line.long 0x0 "WORD139,Message Buffer 39 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS40,Message Buffer 40 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB16_32B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB26_16B_WORD2,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x300++0x3 line.long 0x0 "MB40_8B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x7 line.long 0x0 "MB8_64B_WORD14,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID40,Message Buffer 40 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB16_32B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB26_16B_WORD3,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x304++0x3 line.long 0x0 "MB40_8B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x7 line.long 0x0 "MB8_64B_WORD15,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD0,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB27_16B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x3 line.long 0x0 "MB40_8B_WORD0,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB9_64B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x7 line.long 0x0 "WORD040,Message Buffer 40 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD1,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB27_16B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x3 line.long 0x0 "MB40_8B_WORD1,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB9_64B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x7 line.long 0x0 "WORD140,Message Buffer 40 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS41,Message Buffer 41 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x3 line.long 0x0 "MB16_32B_WORD2,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB27_16B_WORD0,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB41_8B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x7 line.long 0x0 "MB9_64B_WORD0,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID41,Message Buffer 41 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x3 line.long 0x0 "MB16_32B_WORD3,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB27_16B_WORD1,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB41_8B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x7 line.long 0x0 "MB9_64B_WORD1,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD4,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB27_16B_WORD2,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB41_8B_WORD0,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB9_64B_WORD2,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x7 line.long 0x0 "WORD041,Message Buffer 41 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD5,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB27_16B_WORD3,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB41_8B_WORD1,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB9_64B_WORD3,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x7 line.long 0x0 "WORD141,Message Buffer 41 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS42,Message Buffer 42 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB16_32B_WORD6,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x320++0x3 line.long 0x0 "MB28_16B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB42_8B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x7 line.long 0x0 "MB9_64B_WORD4,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID42,Message Buffer 42 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB16_32B_WORD7,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x324++0x3 line.long 0x0 "MB28_16B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB42_8B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x7 line.long 0x0 "MB9_64B_WORD5,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x328++0x3 line.long 0x0 "MB28_16B_WORD0,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB42_8B_WORD0,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB9_64B_WORD6,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x328++0x7 line.long 0x0 "WORD042,Message Buffer 42 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x32C++0x3 line.long 0x0 "MB28_16B_WORD1,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB42_8B_WORD1,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB9_64B_WORD7,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x7 line.long 0x0 "WORD142,Message Buffer 42 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS43,Message Buffer 43 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x3 line.long 0x0 "MB17_32B_WORD0,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB28_16B_WORD2,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB43_8B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x7 line.long 0x0 "MB9_64B_WORD8,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID43,Message Buffer 43 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x3 line.long 0x0 "MB17_32B_WORD1,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB28_16B_WORD3,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB43_8B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x7 line.long 0x0 "MB9_64B_WORD9,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD2,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB29_16B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x338++0x3 line.long 0x0 "MB43_8B_WORD0,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB9_64B_WORD10,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x338++0x7 line.long 0x0 "WORD043,Message Buffer 43 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD3,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB29_16B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x33C++0x3 line.long 0x0 "MB43_8B_WORD1,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB9_64B_WORD11,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x7 line.long 0x0 "WORD143,Message Buffer 43 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS44,Message Buffer 44 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x3 line.long 0x0 "MB17_32B_WORD4,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB29_16B_WORD0,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB44_8B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x7 line.long 0x0 "MB9_64B_WORD12,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID44,Message Buffer 44 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x3 line.long 0x0 "MB17_32B_WORD5,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB29_16B_WORD1,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB44_8B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x7 line.long 0x0 "MB9_64B_WORD13,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD6,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB29_16B_WORD2,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB44_8B_WORD0,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB9_64B_WORD14,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x348++0x7 line.long 0x0 "WORD044,Message Buffer 44 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD7,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB29_16B_WORD3,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB44_8B_WORD1,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB9_64B_WORD15,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x7 line.long 0x0 "WORD144,Message Buffer 44 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS45,Message Buffer 45 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB10_64B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB18_32B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB30_16B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x7 line.long 0x0 "MB45_8B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID45,Message Buffer 45 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB10_64B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB18_32B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB30_16B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x7 line.long 0x0 "MB45_8B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD0,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB18_32B_WORD0,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB30_16B_WORD0,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB45_8B_WORD0,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x7 line.long 0x0 "WORD045,Message Buffer 45 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD1,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB18_32B_WORD1,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB30_16B_WORD1,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB45_8B_WORD1,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x7 line.long 0x0 "WORD145,Message Buffer 45 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS46,Message Buffer 46 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x360++0x3 line.long 0x0 "MB10_64B_WORD2,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB18_32B_WORD2,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB30_16B_WORD2,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x7 line.long 0x0 "MB46_8B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID46,Message Buffer 46 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x364++0x3 line.long 0x0 "MB10_64B_WORD3,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB18_32B_WORD3,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB30_16B_WORD3,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x7 line.long 0x0 "MB46_8B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD4,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB18_32B_WORD4,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB31_16B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x368++0x3 line.long 0x0 "MB46_8B_WORD0,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x368++0x7 line.long 0x0 "WORD046,Message Buffer 46 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD5,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB18_32B_WORD5,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB31_16B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x36C++0x3 line.long 0x0 "MB46_8B_WORD1,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x7 line.long 0x0 "WORD146,Message Buffer 46 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS47,Message Buffer 47 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x370++0x3 line.long 0x0 "MB10_64B_WORD6,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB18_32B_WORD6,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB31_16B_WORD0,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x370++0x7 line.long 0x0 "MB47_8B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID47,Message Buffer 47 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x374++0x3 line.long 0x0 "MB10_64B_WORD7,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB18_32B_WORD7,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB31_16B_WORD1,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x374++0x7 line.long 0x0 "MB47_8B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD8,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB19_32B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x378++0x3 line.long 0x0 "MB31_16B_WORD2,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB47_8B_WORD0,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x378++0x7 line.long 0x0 "WORD047,Message Buffer 47 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD9,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB19_32B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x37C++0x3 line.long 0x0 "MB31_16B_WORD3,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB47_8B_WORD1,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x7 line.long 0x0 "WORD147,Message Buffer 47 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS48,Message Buffer 48 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x3 line.long 0x0 "MB10_64B_WORD10,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB19_32B_WORD0,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB32_16B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x7 line.long 0x0 "MB48_8B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID48,Message Buffer 48 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x3 line.long 0x0 "MB10_64B_WORD11,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB19_32B_WORD1,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB32_16B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x7 line.long 0x0 "MB48_8B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD12,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB19_32B_WORD2,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB32_16B_WORD0,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB48_8B_WORD0,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x7 line.long 0x0 "WORD048,Message Buffer 48 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD13,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB19_32B_WORD3,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB32_16B_WORD1,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB48_8B_WORD1,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x7 line.long 0x0 "WORD148,Message Buffer 48 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS49,Message Buffer 49 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x390++0x3 line.long 0x0 "MB10_64B_WORD14,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB19_32B_WORD4,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB32_16B_WORD2,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x390++0x7 line.long 0x0 "MB49_8B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID49,Message Buffer 49 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x394++0x3 line.long 0x0 "MB10_64B_WORD15,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB19_32B_WORD5,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB32_16B_WORD3,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x394++0x7 line.long 0x0 "MB49_8B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB19_32B_WORD6,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x398++0x3 line.long 0x0 "MB33_16B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB49_8B_WORD0,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x398++0x7 line.long 0x0 "WORD049,Message Buffer 49 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB19_32B_WORD7,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x3 line.long 0x0 "MB33_16B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB49_8B_WORD1,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x7 line.long 0x0 "WORD149,Message Buffer 49 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS50,Message Buffer 50 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB11_64B_WORD0,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x3 line.long 0x0 "MB20_32B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB33_16B_WORD0,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x7 line.long 0x0 "MB50_8B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID50,Message Buffer 50 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB11_64B_WORD1,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x3 line.long 0x0 "MB20_32B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB33_16B_WORD1,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x7 line.long 0x0 "MB50_8B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD2,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB20_32B_WORD0,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB33_16B_WORD2,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB50_8B_WORD0,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x7 line.long 0x0 "WORD050,Message Buffer 50 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD3,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB20_32B_WORD1,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB33_16B_WORD3,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB50_8B_WORD1,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x7 line.long 0x0 "WORD150,Message Buffer 50 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS51,Message Buffer 51 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x3 line.long 0x0 "MB11_64B_WORD4,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB20_32B_WORD2,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB34_16B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x7 line.long 0x0 "MB51_8B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID51,Message Buffer 51 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x3 line.long 0x0 "MB11_64B_WORD5,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB20_32B_WORD3,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB34_16B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x7 line.long 0x0 "MB51_8B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD6,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB20_32B_WORD4,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB34_16B_WORD0,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB51_8B_WORD0,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x7 line.long 0x0 "WORD051,Message Buffer 51 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD7,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB20_32B_WORD5,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB34_16B_WORD1,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB51_8B_WORD1,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x7 line.long 0x0 "WORD151,Message Buffer 51 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS52,Message Buffer 52 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C0++0x3 line.long 0x0 "MB11_64B_WORD8,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB20_32B_WORD6,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB34_16B_WORD2,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x7 line.long 0x0 "MB52_8B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID52,Message Buffer 52 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3C4++0x3 line.long 0x0 "MB11_64B_WORD9,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB20_32B_WORD7,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB34_16B_WORD3,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x7 line.long 0x0 "MB52_8B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD10,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x3 line.long 0x0 "MB21_32B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB35_16B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB52_8B_WORD0,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x7 line.long 0x0 "WORD052,Message Buffer 52 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD11,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x3 line.long 0x0 "MB21_32B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB35_16B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB52_8B_WORD1,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x7 line.long 0x0 "WORD152,Message Buffer 52 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS53,Message Buffer 53 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3D0++0x3 line.long 0x0 "MB11_64B_WORD12,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB21_32B_WORD0,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB35_16B_WORD0,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x7 line.long 0x0 "MB53_8B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID53,Message Buffer 53 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3D4++0x3 line.long 0x0 "MB11_64B_WORD13,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB21_32B_WORD1,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB35_16B_WORD1,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x7 line.long 0x0 "MB53_8B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD14,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB21_32B_WORD2,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB35_16B_WORD2,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB53_8B_WORD0,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x7 line.long 0x0 "WORD053,Message Buffer 53 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD15,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB21_32B_WORD3,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB35_16B_WORD3,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB53_8B_WORD1,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x7 line.long 0x0 "WORD153,Message Buffer 53 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS54,Message Buffer 54 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB12_64B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB21_32B_WORD4,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3E0++0x3 line.long 0x0 "MB36_16B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x7 line.long 0x0 "MB54_8B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID54,Message Buffer 54 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB12_64B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB21_32B_WORD5,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3E4++0x3 line.long 0x0 "MB36_16B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x7 line.long 0x0 "MB54_8B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD0,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB21_32B_WORD6,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB36_16B_WORD0,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB54_8B_WORD0,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x7 line.long 0x0 "WORD054,Message Buffer 54 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD1,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB21_32B_WORD7,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB36_16B_WORD1,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB54_8B_WORD1,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x7 line.long 0x0 "WORD154,Message Buffer 54 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS55,Message Buffer 55 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB12_64B_WORD2,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x3 line.long 0x0 "MB22_32B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB36_16B_WORD2,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x7 line.long 0x0 "MB55_8B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID55,Message Buffer 55 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB12_64B_WORD3,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x3 line.long 0x0 "MB22_32B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB36_16B_WORD3,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x7 line.long 0x0 "MB55_8B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD4,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB22_32B_WORD0,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB37_16B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F8++0x3 line.long 0x0 "MB55_8B_WORD0,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x7 line.long 0x0 "WORD055,Message Buffer 55 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD5,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB22_32B_WORD1,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB37_16B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3FC++0x3 line.long 0x0 "MB55_8B_WORD1,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x7 line.long 0x0 "WORD155,Message Buffer 55 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS56,Message Buffer 56 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x400++0x3 line.long 0x0 "MB12_64B_WORD6,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB22_32B_WORD2,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB37_16B_WORD0,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x400++0x7 line.long 0x0 "MB56_8B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID56,Message Buffer 56 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x404++0x3 line.long 0x0 "MB12_64B_WORD7,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB22_32B_WORD3,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB37_16B_WORD1,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x404++0x7 line.long 0x0 "MB56_8B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD8,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB22_32B_WORD4,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB37_16B_WORD2,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB56_8B_WORD0,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x408++0x7 line.long 0x0 "WORD056,Message Buffer 56 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD9,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB22_32B_WORD5,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB37_16B_WORD3,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB56_8B_WORD1,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x7 line.long 0x0 "WORD156,Message Buffer 56 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS57,Message Buffer 57 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x3 line.long 0x0 "MB12_64B_WORD10,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB22_32B_WORD6,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB38_16B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x7 line.long 0x0 "MB57_8B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID57,Message Buffer 57 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x3 line.long 0x0 "MB12_64B_WORD11,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB22_32B_WORD7,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB38_16B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x7 line.long 0x0 "MB57_8B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD12,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB23_32B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x418++0x3 line.long 0x0 "MB38_16B_WORD0,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB57_8B_WORD0,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x7 line.long 0x0 "WORD057,Message Buffer 57 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD13,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB23_32B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x41C++0x3 line.long 0x0 "MB38_16B_WORD1,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB57_8B_WORD1,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x7 line.long 0x0 "WORD157,Message Buffer 57 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS58,Message Buffer 58 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x420++0x3 line.long 0x0 "MB12_64B_WORD14,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB23_32B_WORD0,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB38_16B_WORD2,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x420++0x7 line.long 0x0 "MB58_8B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID58,Message Buffer 58 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x424++0x3 line.long 0x0 "MB12_64B_WORD15,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB23_32B_WORD1,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB38_16B_WORD3,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x424++0x7 line.long 0x0 "MB58_8B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB23_32B_WORD2,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x428++0x3 line.long 0x0 "MB39_16B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB58_8B_WORD0,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x428++0x7 line.long 0x0 "WORD058,Message Buffer 58 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB23_32B_WORD3,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x3 line.long 0x0 "MB39_16B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB58_8B_WORD1,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x7 line.long 0x0 "WORD158,Message Buffer 58 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS59,Message Buffer 59 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x430++0x3 line.long 0x0 "MB13_64B_WORD0,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB23_32B_WORD4,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB39_16B_WORD0,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x7 line.long 0x0 "MB59_8B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID59,Message Buffer 59 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x434++0x3 line.long 0x0 "MB13_64B_WORD1,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB23_32B_WORD5,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB39_16B_WORD1,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x7 line.long 0x0 "MB59_8B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD2,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB23_32B_WORD6,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB39_16B_WORD2,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB59_8B_WORD0,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x438++0x7 line.long 0x0 "WORD059,Message Buffer 59 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD3,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB23_32B_WORD7,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB39_16B_WORD3,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB59_8B_WORD1,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x7 line.long 0x0 "WORD159,Message Buffer 59 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS60,Message Buffer 60 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB13_64B_WORD4,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x440++0x3 line.long 0x0 "MB24_32B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB40_16B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x7 line.long 0x0 "MB60_8B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID60,Message Buffer 60 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB13_64B_WORD5,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x444++0x3 line.long 0x0 "MB24_32B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB40_16B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x7 line.long 0x0 "MB60_8B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD6,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB24_32B_WORD0,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB40_16B_WORD0,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB60_8B_WORD0,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x7 line.long 0x0 "WORD060,Message Buffer 60 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD7,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB24_32B_WORD1,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB40_16B_WORD1,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB60_8B_WORD1,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x7 line.long 0x0 "WORD160,Message Buffer 60 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS61,Message Buffer 61 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x450++0x3 line.long 0x0 "MB13_64B_WORD8,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB24_32B_WORD2,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB40_16B_WORD2,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x7 line.long 0x0 "MB61_8B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID61,Message Buffer 61 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x454++0x3 line.long 0x0 "MB13_64B_WORD9,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB24_32B_WORD3,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB40_16B_WORD3,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x7 line.long 0x0 "MB61_8B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD10,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB24_32B_WORD4,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB41_16B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x458++0x3 line.long 0x0 "MB61_8B_WORD0,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x458++0x7 line.long 0x0 "WORD061,Message Buffer 61 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD11,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB24_32B_WORD5,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB41_16B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x45C++0x3 line.long 0x0 "MB61_8B_WORD1,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x7 line.long 0x0 "WORD161,Message Buffer 61 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS62,Message Buffer 62 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x460++0x3 line.long 0x0 "MB13_64B_WORD12,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB24_32B_WORD6,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB41_16B_WORD0,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x460++0x7 line.long 0x0 "MB62_8B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID62,Message Buffer 62 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x464++0x3 line.long 0x0 "MB13_64B_WORD13,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB24_32B_WORD7,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB41_16B_WORD1,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x464++0x7 line.long 0x0 "MB62_8B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD14,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB25_32B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x468++0x3 line.long 0x0 "MB41_16B_WORD2,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB62_8B_WORD0,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x468++0x7 line.long 0x0 "WORD062,Message Buffer 62 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD15,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB25_32B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x46C++0x3 line.long 0x0 "MB41_16B_WORD3,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB62_8B_WORD1,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x7 line.long 0x0 "WORD162,Message Buffer 62 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS63,Message Buffer 63 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB14_64B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB25_32B_WORD0,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x470++0x3 line.long 0x0 "MB42_16B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x7 line.long 0x0 "MB63_8B_CS,Message Buffer 63 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID63,Message Buffer 63 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB14_64B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB25_32B_WORD1,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x474++0x3 line.long 0x0 "MB42_16B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x7 line.long 0x0 "MB63_8B_ID,Message Buffer 63 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD0,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB25_32B_WORD2,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB42_16B_WORD0,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB63_8B_WORD0,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x7 line.long 0x0 "WORD063,Message Buffer 63 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD1,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB25_32B_WORD3,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB42_16B_WORD1,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB63_8B_WORD1,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x7 line.long 0x0 "WORD163,Message Buffer 63 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS64,Message Buffer 64 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x480++0x3 line.long 0x0 "MB14_64B_WORD2,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB25_32B_WORD4,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB42_16B_WORD2,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x7 line.long 0x0 "MB64_8B_CS,Message Buffer 64 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID64,Message Buffer 64 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x484++0x3 line.long 0x0 "MB14_64B_WORD3,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB25_32B_WORD5,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB42_16B_WORD3,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x7 line.long 0x0 "MB64_8B_ID,Message Buffer 64 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD4,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB25_32B_WORD6,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB43_16B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x488++0x3 line.long 0x0 "MB64_8B_WORD0,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x488++0x7 line.long 0x0 "WORD064,Message Buffer 64 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD5,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB25_32B_WORD7,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB43_16B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x48C++0x3 line.long 0x0 "MB64_8B_WORD1,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x7 line.long 0x0 "WORD164,Message Buffer 64 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS65,Message Buffer 65 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB14_64B_WORD6,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x490++0x3 line.long 0x0 "MB26_32B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB43_16B_WORD0,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x490++0x7 line.long 0x0 "MB65_8B_CS,Message Buffer 65 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID65,Message Buffer 65 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB14_64B_WORD7,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x494++0x3 line.long 0x0 "MB26_32B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB43_16B_WORD1,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x494++0x7 line.long 0x0 "MB65_8B_ID,Message Buffer 65 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD8,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB26_32B_WORD0,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB43_16B_WORD2,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB65_8B_WORD0,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x7 line.long 0x0 "WORD065,Message Buffer 65 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD9,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB26_32B_WORD1,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB43_16B_WORD3,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB65_8B_WORD1,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x7 line.long 0x0 "WORD165,Message Buffer 65 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS66,Message Buffer 66 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x3 line.long 0x0 "MB14_64B_WORD10,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB26_32B_WORD2,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB44_16B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x7 line.long 0x0 "MB66_8B_CS,Message Buffer 66 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID66,Message Buffer 66 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x3 line.long 0x0 "MB14_64B_WORD11,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB26_32B_WORD3,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB44_16B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x7 line.long 0x0 "MB66_8B_ID,Message Buffer 66 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD12,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB26_32B_WORD4,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB44_16B_WORD0,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB66_8B_WORD0,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x7 line.long 0x0 "WORD066,Message Buffer 66 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD13,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB26_32B_WORD5,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB44_16B_WORD1,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB66_8B_WORD1,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x7 line.long 0x0 "WORD166,Message Buffer 66 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS67,Message Buffer 67 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B0++0x3 line.long 0x0 "MB14_64B_WORD14,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB26_32B_WORD6,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB44_16B_WORD2,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x7 line.long 0x0 "MB67_8B_CS,Message Buffer 67 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID67,Message Buffer 67 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4B4++0x3 line.long 0x0 "MB14_64B_WORD15,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB26_32B_WORD7,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB44_16B_WORD3,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x7 line.long 0x0 "MB67_8B_ID,Message Buffer 67 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB27_32B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB45_16B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB67_8B_WORD0,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4B8++0x7 line.long 0x0 "WORD067,Message Buffer 67 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB27_32B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB45_16B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB67_8B_WORD1,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4BC++0x7 line.long 0x0 "WORD167,Message Buffer 67 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS68,Message Buffer 68 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4C0++0x3 line.long 0x0 "MB15_64B_WORD0,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB27_32B_WORD0,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB45_16B_WORD0,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x7 line.long 0x0 "MB68_8B_CS,Message Buffer 68 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID68,Message Buffer 68 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4C4++0x3 line.long 0x0 "MB15_64B_WORD1,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB27_32B_WORD1,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB45_16B_WORD1,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x7 line.long 0x0 "MB68_8B_ID,Message Buffer 68 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD2,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB27_32B_WORD2,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB45_16B_WORD2,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB68_8B_WORD0,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x7 line.long 0x0 "WORD068,Message Buffer 68 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD3,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB27_32B_WORD3,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB45_16B_WORD3,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB68_8B_WORD1,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x7 line.long 0x0 "WORD168,Message Buffer 68 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS69,Message Buffer 69 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x3 line.long 0x0 "MB15_64B_WORD4,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB27_32B_WORD4,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB46_16B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x7 line.long 0x0 "MB69_8B_CS,Message Buffer 69 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID69,Message Buffer 69 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x3 line.long 0x0 "MB15_64B_WORD5,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB27_32B_WORD5,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB46_16B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x7 line.long 0x0 "MB69_8B_ID,Message Buffer 69 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD6,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB27_32B_WORD6,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB46_16B_WORD0,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB69_8B_WORD0,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x7 line.long 0x0 "WORD069,Message Buffer 69 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD7,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB27_32B_WORD7,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB46_16B_WORD1,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB69_8B_WORD1,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x7 line.long 0x0 "WORD169,Message Buffer 69 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS70,Message Buffer 70 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB15_64B_WORD8,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x3 line.long 0x0 "MB28_32B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB46_16B_WORD2,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x7 line.long 0x0 "MB70_8B_CS,Message Buffer 70 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID70,Message Buffer 70 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB15_64B_WORD9,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x3 line.long 0x0 "MB28_32B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB46_16B_WORD3,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x7 line.long 0x0 "MB70_8B_ID,Message Buffer 70 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD10,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB28_32B_WORD0,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB47_16B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E8++0x3 line.long 0x0 "MB70_8B_WORD0,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x7 line.long 0x0 "WORD070,Message Buffer 70 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD11,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB28_32B_WORD1,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB47_16B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4EC++0x3 line.long 0x0 "MB70_8B_WORD1,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x7 line.long 0x0 "WORD170,Message Buffer 70 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS71,Message Buffer 71 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4F0++0x3 line.long 0x0 "MB15_64B_WORD12,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB28_32B_WORD2,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB47_16B_WORD0,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x7 line.long 0x0 "MB71_8B_CS,Message Buffer 71 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID71,Message Buffer 71 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4F4++0x3 line.long 0x0 "MB15_64B_WORD13,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB28_32B_WORD3,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB47_16B_WORD1,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x7 line.long 0x0 "MB71_8B_ID,Message Buffer 71 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD14,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB28_32B_WORD4,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB47_16B_WORD2,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB71_8B_WORD0,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x7 line.long 0x0 "WORD071,Message Buffer 71 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD15,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB28_32B_WORD5,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB47_16B_WORD3,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB71_8B_WORD1,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x7 line.long 0x0 "WORD171,Message Buffer 71 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS72,Message Buffer 72 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB16_64B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB28_32B_WORD6,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x500++0x3 line.long 0x0 "MB48_16B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x7 line.long 0x0 "MB72_8B_CS,Message Buffer 72 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID72,Message Buffer 72 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB16_64B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB28_32B_WORD7,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x504++0x3 line.long 0x0 "MB48_16B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x7 line.long 0x0 "MB72_8B_ID,Message Buffer 72 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD0,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB29_32B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x508++0x3 line.long 0x0 "MB48_16B_WORD0,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB72_8B_WORD0,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x7 line.long 0x0 "WORD072,Message Buffer 72 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD1,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB29_32B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x50C++0x3 line.long 0x0 "MB48_16B_WORD1,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB72_8B_WORD1,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x7 line.long 0x0 "WORD172,Message Buffer 72 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS73,Message Buffer 73 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x510++0x3 line.long 0x0 "MB16_64B_WORD2,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB29_32B_WORD0,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB48_16B_WORD2,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x7 line.long 0x0 "MB73_8B_CS,Message Buffer 73 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID73,Message Buffer 73 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x514++0x3 line.long 0x0 "MB16_64B_WORD3,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB29_32B_WORD1,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB48_16B_WORD3,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x7 line.long 0x0 "MB73_8B_ID,Message Buffer 73 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD4,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB29_32B_WORD2,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB49_16B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x518++0x3 line.long 0x0 "MB73_8B_WORD0,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x518++0x7 line.long 0x0 "WORD073,Message Buffer 73 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD5,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB29_32B_WORD3,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB49_16B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x51C++0x3 line.long 0x0 "MB73_8B_WORD1,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x7 line.long 0x0 "WORD173,Message Buffer 73 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS74,Message Buffer 74 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x520++0x3 line.long 0x0 "MB16_64B_WORD6,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB29_32B_WORD4,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB49_16B_WORD0,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x520++0x7 line.long 0x0 "MB74_8B_CS,Message Buffer 74 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID74,Message Buffer 74 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x524++0x3 line.long 0x0 "MB16_64B_WORD7,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB29_32B_WORD5,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB49_16B_WORD1,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x524++0x7 line.long 0x0 "MB74_8B_ID,Message Buffer 74 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD8,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB29_32B_WORD6,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB49_16B_WORD2,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB74_8B_WORD0,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x528++0x7 line.long 0x0 "WORD074,Message Buffer 74 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD9,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB29_32B_WORD7,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB49_16B_WORD3,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB74_8B_WORD1,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x7 line.long 0x0 "WORD174,Message Buffer 74 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS75,Message Buffer 75 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB16_64B_WORD10,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x530++0x3 line.long 0x0 "MB30_32B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB50_16B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x7 line.long 0x0 "MB75_8B_CS,Message Buffer 75 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID75,Message Buffer 75 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB16_64B_WORD11,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x534++0x3 line.long 0x0 "MB30_32B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB50_16B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x7 line.long 0x0 "MB75_8B_ID,Message Buffer 75 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD12,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB30_32B_WORD0,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB50_16B_WORD0,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB75_8B_WORD0,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x7 line.long 0x0 "WORD075,Message Buffer 75 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD13,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB30_32B_WORD1,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB50_16B_WORD1,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB75_8B_WORD1,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x7 line.long 0x0 "WORD175,Message Buffer 75 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS76,Message Buffer 76 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x540++0x3 line.long 0x0 "MB16_64B_WORD14,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB30_32B_WORD2,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB50_16B_WORD2,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x7 line.long 0x0 "MB76_8B_CS,Message Buffer 76 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID76,Message Buffer 76 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x544++0x3 line.long 0x0 "MB16_64B_WORD15,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB30_32B_WORD3,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB50_16B_WORD3,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x7 line.long 0x0 "MB76_8B_ID,Message Buffer 76 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB30_32B_WORD4,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x548++0x3 line.long 0x0 "MB51_16B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB76_8B_WORD0,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x548++0x7 line.long 0x0 "WORD076,Message Buffer 76 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB30_32B_WORD5,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x3 line.long 0x0 "MB51_16B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB76_8B_WORD1,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x7 line.long 0x0 "WORD176,Message Buffer 76 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS77,Message Buffer 77 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x550++0x3 line.long 0x0 "MB17_64B_WORD0,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB30_32B_WORD6,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB51_16B_WORD0,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x7 line.long 0x0 "MB77_8B_CS,Message Buffer 77 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID77,Message Buffer 77 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x554++0x3 line.long 0x0 "MB17_64B_WORD1,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB30_32B_WORD7,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB51_16B_WORD1,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x7 line.long 0x0 "MB77_8B_ID,Message Buffer 77 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD2,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB31_32B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x558++0x3 line.long 0x0 "MB51_16B_WORD2,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB77_8B_WORD0,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x558++0x7 line.long 0x0 "WORD077,Message Buffer 77 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD3,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB31_32B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x55C++0x3 line.long 0x0 "MB51_16B_WORD3,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB77_8B_WORD1,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x7 line.long 0x0 "WORD177,Message Buffer 77 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS78,Message Buffer 78 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x3 line.long 0x0 "MB17_64B_WORD4,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB31_32B_WORD0,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB52_16B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x7 line.long 0x0 "MB78_8B_CS,Message Buffer 78 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID78,Message Buffer 78 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x3 line.long 0x0 "MB17_64B_WORD5,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB31_32B_WORD1,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB52_16B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x7 line.long 0x0 "MB78_8B_ID,Message Buffer 78 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD6,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB31_32B_WORD2,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB52_16B_WORD0,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB78_8B_WORD0,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x7 line.long 0x0 "WORD078,Message Buffer 78 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD7,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB31_32B_WORD3,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB52_16B_WORD1,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB78_8B_WORD1,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x7 line.long 0x0 "WORD178,Message Buffer 78 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS79,Message Buffer 79 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x570++0x3 line.long 0x0 "MB17_64B_WORD8,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB31_32B_WORD4,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB52_16B_WORD2,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x570++0x7 line.long 0x0 "MB79_8B_CS,Message Buffer 79 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID79,Message Buffer 79 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x574++0x3 line.long 0x0 "MB17_64B_WORD9,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB31_32B_WORD5,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB52_16B_WORD3,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x574++0x7 line.long 0x0 "MB79_8B_ID,Message Buffer 79 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD10,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB31_32B_WORD6,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB53_16B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x578++0x3 line.long 0x0 "MB79_8B_WORD0,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x578++0x7 line.long 0x0 "WORD079,Message Buffer 79 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD11,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB31_32B_WORD7,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB53_16B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x57C++0x3 line.long 0x0 "MB79_8B_WORD1,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x7 line.long 0x0 "WORD179,Message Buffer 79 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS80,Message Buffer 80 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB17_64B_WORD12,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x580++0x3 line.long 0x0 "MB32_32B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB53_16B_WORD0,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x580++0x7 line.long 0x0 "MB80_8B_CS,Message Buffer 80 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID80,Message Buffer 80 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB17_64B_WORD13,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x584++0x3 line.long 0x0 "MB32_32B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB53_16B_WORD1,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x584++0x7 line.long 0x0 "MB80_8B_ID,Message Buffer 80 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD14,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB32_32B_WORD0,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB53_16B_WORD2,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB80_8B_WORD0,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x7 line.long 0x0 "WORD080,Message Buffer 80 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD15,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB32_32B_WORD1,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB53_16B_WORD3,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB80_8B_WORD1,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x7 line.long 0x0 "WORD180,Message Buffer 80 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS81,Message Buffer 81 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB18_64B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB32_32B_WORD2,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x590++0x3 line.long 0x0 "MB54_16B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x7 line.long 0x0 "MB81_8B_CS,Message Buffer 81 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID81,Message Buffer 81 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB18_64B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB32_32B_WORD3,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x594++0x3 line.long 0x0 "MB54_16B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x7 line.long 0x0 "MB81_8B_ID,Message Buffer 81 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD0,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB32_32B_WORD4,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB54_16B_WORD0,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB81_8B_WORD0,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x7 line.long 0x0 "WORD081,Message Buffer 81 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD1,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB32_32B_WORD5,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB54_16B_WORD1,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB81_8B_WORD1,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x7 line.long 0x0 "WORD181,Message Buffer 81 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS82,Message Buffer 82 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A0++0x3 line.long 0x0 "MB18_64B_WORD2,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB32_32B_WORD6,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB54_16B_WORD2,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x7 line.long 0x0 "MB82_8B_CS,Message Buffer 82 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID82,Message Buffer 82 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5A4++0x3 line.long 0x0 "MB18_64B_WORD3,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB32_32B_WORD7,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB54_16B_WORD3,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x7 line.long 0x0 "MB82_8B_ID,Message Buffer 82 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD4,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x3 line.long 0x0 "MB33_32B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB55_16B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB82_8B_WORD0,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x7 line.long 0x0 "WORD082,Message Buffer 82 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD5,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x3 line.long 0x0 "MB33_32B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB55_16B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB82_8B_WORD1,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x7 line.long 0x0 "WORD182,Message Buffer 82 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS83,Message Buffer 83 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5B0++0x3 line.long 0x0 "MB18_64B_WORD6,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB33_32B_WORD0,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB55_16B_WORD0,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x7 line.long 0x0 "MB83_8B_CS,Message Buffer 83 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID83,Message Buffer 83 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5B4++0x3 line.long 0x0 "MB18_64B_WORD7,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB33_32B_WORD1,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB55_16B_WORD1,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x7 line.long 0x0 "MB83_8B_ID,Message Buffer 83 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD8,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB33_32B_WORD2,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB55_16B_WORD2,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB83_8B_WORD0,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x7 line.long 0x0 "WORD083,Message Buffer 83 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD9,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB33_32B_WORD3,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB55_16B_WORD3,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB83_8B_WORD1,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x7 line.long 0x0 "WORD183,Message Buffer 83 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS84,Message Buffer 84 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x3 line.long 0x0 "MB18_64B_WORD10,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB33_32B_WORD4,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB56_16B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x7 line.long 0x0 "MB84_8B_CS,Message Buffer 84 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID84,Message Buffer 84 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x3 line.long 0x0 "MB18_64B_WORD11,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB33_32B_WORD5,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB56_16B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x7 line.long 0x0 "MB84_8B_ID,Message Buffer 84 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD12,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB33_32B_WORD6,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB56_16B_WORD0,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB84_8B_WORD0,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x7 line.long 0x0 "WORD084,Message Buffer 84 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD13,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB33_32B_WORD7,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB56_16B_WORD1,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB84_8B_WORD1,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x7 line.long 0x0 "WORD184,Message Buffer 84 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS85,Message Buffer 85 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB18_64B_WORD14,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x3 line.long 0x0 "MB34_32B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB56_16B_WORD2,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x7 line.long 0x0 "MB85_8B_CS,Message Buffer 85 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID85,Message Buffer 85 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB18_64B_WORD15,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x3 line.long 0x0 "MB34_32B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB56_16B_WORD3,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x7 line.long 0x0 "MB85_8B_ID,Message Buffer 85 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_CS,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB34_32B_WORD0,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x3 line.long 0x0 "MB57_16B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB85_8B_WORD0,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x7 line.long 0x0 "WORD085,Message Buffer 85 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_ID,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB34_32B_WORD1,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x3 line.long 0x0 "MB57_16B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB85_8B_WORD1,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x7 line.long 0x0 "WORD185,Message Buffer 85 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS86,Message Buffer 86 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5E0++0x3 line.long 0x0 "MB19_64B_WORD0,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB34_32B_WORD2,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB57_16B_WORD0,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x7 line.long 0x0 "MB86_8B_CS,Message Buffer 86 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID86,Message Buffer 86 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5E4++0x3 line.long 0x0 "MB19_64B_WORD1,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB34_32B_WORD3,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB57_16B_WORD1,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x7 line.long 0x0 "MB86_8B_ID,Message Buffer 86 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD2,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB34_32B_WORD4,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB57_16B_WORD2,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB86_8B_WORD0,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x7 line.long 0x0 "WORD086,Message Buffer 86 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD3,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB34_32B_WORD5,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB57_16B_WORD3,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB86_8B_WORD1,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x7 line.long 0x0 "WORD186,Message Buffer 86 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS87,Message Buffer 87 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x3 line.long 0x0 "MB19_64B_WORD4,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB34_32B_WORD6,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB58_16B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x7 line.long 0x0 "MB87_8B_CS,Message Buffer 87 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID87,Message Buffer 87 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x3 line.long 0x0 "MB19_64B_WORD5,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB34_32B_WORD7,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB58_16B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x7 line.long 0x0 "MB87_8B_ID,Message Buffer 87 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD6,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB35_32B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F8++0x3 line.long 0x0 "MB58_16B_WORD0,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB87_8B_WORD0,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x7 line.long 0x0 "WORD087,Message Buffer 87 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD7,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB35_32B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5FC++0x3 line.long 0x0 "MB58_16B_WORD1,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB87_8B_WORD1,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x7 line.long 0x0 "WORD187,Message Buffer 87 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS88,Message Buffer 88 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x600++0x3 line.long 0x0 "MB19_64B_WORD8,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB35_32B_WORD0,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB58_16B_WORD2,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x600++0x7 line.long 0x0 "MB88_8B_CS,Message Buffer 88 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID88,Message Buffer 88 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x604++0x3 line.long 0x0 "MB19_64B_WORD9,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB35_32B_WORD1,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB58_16B_WORD3,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x604++0x7 line.long 0x0 "MB88_8B_ID,Message Buffer 88 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD10,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB35_32B_WORD2,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB59_16B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x608++0x3 line.long 0x0 "MB88_8B_WORD0,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x608++0x7 line.long 0x0 "WORD088,Message Buffer 88 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD11,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB35_32B_WORD3,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB59_16B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x60C++0x3 line.long 0x0 "MB88_8B_WORD1,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x7 line.long 0x0 "WORD188,Message Buffer 88 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS89,Message Buffer 89 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x610++0x3 line.long 0x0 "MB19_64B_WORD12,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB35_32B_WORD4,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB59_16B_WORD0,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x610++0x7 line.long 0x0 "MB89_8B_CS,Message Buffer 89 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID89,Message Buffer 89 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x614++0x3 line.long 0x0 "MB19_64B_WORD13,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB35_32B_WORD5,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB59_16B_WORD1,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x614++0x7 line.long 0x0 "MB89_8B_ID,Message Buffer 89 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD14,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB35_32B_WORD6,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB59_16B_WORD2,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB89_8B_WORD0,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x618++0x7 line.long 0x0 "WORD089,Message Buffer 89 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD15,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB35_32B_WORD7,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB59_16B_WORD3,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB89_8B_WORD1,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x7 line.long 0x0 "WORD189,Message Buffer 89 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS90,Message Buffer 90 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB20_64B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB60_16B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x7 line.long 0x0 "MB90_8B_CS,Message Buffer 90 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID90,Message Buffer 90 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB20_64B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB60_16B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x7 line.long 0x0 "MB90_8B_ID,Message Buffer 90 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD0,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB60_16B_WORD0,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB90_8B_WORD0,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x7 line.long 0x0 "WORD090,Message Buffer 90 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD1,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB60_16B_WORD1,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB90_8B_WORD1,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x7 line.long 0x0 "WORD190,Message Buffer 90 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS91,Message Buffer 91 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x630++0x3 line.long 0x0 "MB20_64B_WORD2,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x3 line.long 0x0 "MB60_16B_WORD2,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x7 line.long 0x0 "MB91_8B_CS,Message Buffer 91 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID91,Message Buffer 91 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x634++0x3 line.long 0x0 "MB20_64B_WORD3,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x3 line.long 0x0 "MB60_16B_WORD3,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x7 line.long 0x0 "MB91_8B_ID,Message Buffer 91 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD4,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x638++0x3 line.long 0x0 "MB61_16B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x638++0x3 line.long 0x0 "MB91_8B_WORD0,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x638++0x7 line.long 0x0 "WORD091,Message Buffer 91 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD5,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x3 line.long 0x0 "MB61_16B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x63C++0x3 line.long 0x0 "MB91_8B_WORD1,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x7 line.long 0x0 "WORD191,Message Buffer 91 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS92,Message Buffer 92 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x640++0x3 line.long 0x0 "MB20_64B_WORD6,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x640++0x3 line.long 0x0 "MB61_16B_WORD0,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x640++0x7 line.long 0x0 "MB92_8B_CS,Message Buffer 92 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID92,Message Buffer 92 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x644++0x3 line.long 0x0 "MB20_64B_WORD7,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x644++0x3 line.long 0x0 "MB61_16B_WORD1,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x644++0x7 line.long 0x0 "MB92_8B_ID,Message Buffer 92 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD8,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB61_16B_WORD2,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB92_8B_WORD0,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x648++0x7 line.long 0x0 "WORD092,Message Buffer 92 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD9,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB61_16B_WORD3,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB92_8B_WORD1,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x7 line.long 0x0 "WORD192,Message Buffer 92 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS93,Message Buffer 93 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x3 line.long 0x0 "MB20_64B_WORD10,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x650++0x3 line.long 0x0 "MB62_16B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x7 line.long 0x0 "MB93_8B_CS,Message Buffer 93 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID93,Message Buffer 93 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x3 line.long 0x0 "MB20_64B_WORD11,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x654++0x3 line.long 0x0 "MB62_16B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x7 line.long 0x0 "MB93_8B_ID,Message Buffer 93 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD12,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB62_16B_WORD0,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB93_8B_WORD0,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x7 line.long 0x0 "WORD093,Message Buffer 93 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD13,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB62_16B_WORD1,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB93_8B_WORD1,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x7 line.long 0x0 "WORD193,Message Buffer 93 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS94,Message Buffer 94 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x660++0x3 line.long 0x0 "MB20_64B_WORD14,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x660++0x3 line.long 0x0 "MB62_16B_WORD2,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x660++0x7 line.long 0x0 "MB94_8B_CS,Message Buffer 94 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID94,Message Buffer 94 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x664++0x3 line.long 0x0 "MB20_64B_WORD15,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x664++0x3 line.long 0x0 "MB62_16B_WORD3,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x664++0x7 line.long 0x0 "MB94_8B_ID,Message Buffer 94 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB94_8B_WORD0,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x668++0x7 line.long 0x0 "WORD094,Message Buffer 94 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB94_8B_WORD1,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x66C++0x7 line.long 0x0 "WORD194,Message Buffer 94 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS95,Message Buffer 95 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x670++0x7 line.long 0x0 "MB95_8B_CS,Message Buffer 95 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID95,Message Buffer 95 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x674++0x7 line.long 0x0 "MB95_8B_ID,Message Buffer 95 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB95_8B_WORD0,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x678++0x7 line.long 0x0 "WORD095,Message Buffer 95 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB95_8B_WORD1,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x67C++0x3 line.long 0x0 "WORD195,Message Buffer 95 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "RXIMR[$1],Rx Individual Mask Registers" hexmask.long 0x0 0.--31. 1. "MI,Individual Mask Bits" repeat.end group.long 0xAE0++0xF line.long 0x0 "MECR,Memory Error Control Register" bitfld.long 0x0 31. "ECRWRDIS,Error Configuration Register Write Disable" "0: Write is enabled.,1: Write is disabled." bitfld.long 0x0 19. "HANCEI_MSK,Host Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 18. "FANCEI_MSK,FlexCAN Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." bitfld.long 0x0 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 15. "HAERRIE,Host Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." bitfld.long 0x0 14. "FAERRIE,FlexCAN Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." newline bitfld.long 0x0 13. "EXTERRIE,Extended Error Injection Enable" "0: Error injection is applied only to the 32-bit..,1: Error injection is applied to the 64-bit word." bitfld.long 0x0 9. "RERRDIS,Error Report Disable" "0: Enable updates of the error report registers.,1: Disable updates of the error report registers." newline bitfld.long 0x0 8. "ECCDIS,Error Correction Disable" "0: Enable memory error correction.,1: Disable memory error correction." bitfld.long 0x0 7. "NCEFAFRZ,Non-Correctable Errors In FlexCAN Access Put Device In Freeze Mode" "0: Keep normal operation.,1: Put FlexCAN in Freeze mode (see section 'Freeze.." line.long 0x4 "ERRIAR,Error Injection Address Register" hexmask.long.word 0x4 2.--13. 1. "INJADDR_H,Error Injection Address High" rbitfld.long 0x4 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3" line.long 0x8 "ERRIDPR,Error Injection Data Pattern Register" hexmask.long 0x8 0.--31. 1. "DFLIP,Data flip pattern" line.long 0xC "ERRIPPR,Error Injection Parity Pattern Register" hexmask.long.byte 0xC 24.--28. 1. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" hexmask.long.byte 0xC 16.--20. 1. "PFLIP2,Parity Flip Pattern For Byte 2" newline hexmask.long.byte 0xC 8.--12. 1. "PFLIP1,Parity Flip Pattern For Byte 1" hexmask.long.byte 0xC 0.--4. 1. "PFLIP0,Parity Flip Pattern For Byte 0 (Least Significant)" rgroup.long 0xAF0++0xB line.long 0x0 "RERRAR,Error Report Address Register" bitfld.long 0x0 24. "NCE,Non-Correctable Error" "0: Reporting a correctable error,1: Reporting a non-correctable error" bitfld.long 0x0 16.--18. "SAID,SAID" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 0.--13. 1. "ERRADDR,Address Where Error Detected" line.long 0x4 "RERRDR,Error Report Data Register" hexmask.long 0x4 0.--31. 1. "RDATA,Raw data word read from memory with error" line.long 0x8 "RERRSYNR,Error Report Syndrome Register" bitfld.long 0x8 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 24.--28. 1. "SYND3,Error Syndrome For Byte 3 (most significant)" newline bitfld.long 0x8 23. "BE2,Byte Enabled For Byte 2" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 16.--20. 1. "SYND2,Error Syndrome For Byte 2" newline bitfld.long 0x8 15. "BE1,Byte Enabled For Byte 1" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 8.--12. 1. "SYND1,Error Syndrome for Byte 1" newline bitfld.long 0x8 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 0.--4. 1. "SYND0,Error Syndrome For Byte 0 (least significant)" group.long 0xAFC++0x3 line.long 0x0 "ERRSR,Error Status Register" eventfld.long 0x0 19. "HANCEIF,Host Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in host..,1: A non-correctable error was detected in a host.." eventfld.long 0x0 18. "FANCEIF,FlexCAN Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in..,1: A non-correctable error was detected in a.." newline eventfld.long 0x0 16. "CEIF,Correctable Error Interrupt Flag" "0: No correctable errors were detected so far.,1: A correctable error was detected." eventfld.long 0x0 3. "HANCEIOF,Host Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in host..,1: Overrun on non-correctable errors in host access" newline eventfld.long 0x0 2. "FANCEIOF,FlexCAN Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in FlexCAN..,1: Overrun on non-correctable errors in FlexCAN.." eventfld.long 0x0 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0: No overrun on correctable errors,1: Overrun on correctable errors" group.long 0xBF0++0x17 line.long 0x0 "EPRS,Enhanced CAN Bit Timing Prescalers" hexmask.long.word 0x0 16.--25. 1. "EDPRESDIV,Extended Data Phase Prescaler Division Factor" hexmask.long.word 0x0 0.--9. 1. "ENPRESDIV,Extended Nominal Prescaler Division Factor" line.long 0x4 "ENCBT,Enhanced Nominal CAN Bit Timing" hexmask.long.byte 0x4 22.--28. 1. "NRJW,Nominal Resynchronization Jump Width" hexmask.long.byte 0x4 12.--18. 1. "NTSEG2,Nominal Time Segment 2" newline hexmask.long.byte 0x4 0.--7. 1. "NTSEG1,Nominal Time Segment 1" line.long 0x8 "EDCBT,Enhanced Data Phase CAN bit Timing" hexmask.long.byte 0x8 22.--25. 1. "DRJW,Data Phase Resynchronization Jump Width" hexmask.long.byte 0x8 12.--15. 1. "DTSEG2,Data Phase Time Segment 2" newline hexmask.long.byte 0x8 0.--4. 1. "DTSEG1,Data Phase Segment 1" line.long 0xC "ETDC,Enhanced Transceiver Delay Compensation" bitfld.long 0xC 31. "ETDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" bitfld.long 0xC 30. "TDMDIS,Transceiver Delay Measurement Disable" "0: TDC measurement is enabled,1: TDC measurement is disabled" newline hexmask.long.byte 0xC 16.--22. 1. "ETDCOFF,Enhanced Transceiver Delay Compensation Offset" eventfld.long 0xC 15. "ETDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0xC 0.--7. 1. "ETDCVAL,Enhanced Transceiver Delay Compensation Value" line.long 0x10 "FDCTRL,CAN FD Control Register" bitfld.long 0x10 31. "FDRATE,Bit Rate Switch Enable" "0: Transmit a frame in nominal rate. The BRS bit in..,1: Transmit a frame with bit rate switching if the.." bitfld.long 0x10 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." bitfld.long 0x10 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 15. "TDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" eventfld.long 0x10 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0x10 8.--12. 1. "TDCOFF,Transceiver Delay Compensation Offset" hexmask.long.byte 0x10 0.--5. 1. "TDCVAL,Transceiver Delay Compensation Value" line.long 0x14 "FDCBT,CAN FD Bit Timing Register" hexmask.long.word 0x14 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor" bitfld.long 0x14 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x14 10.--14. 1. "FPROPSEG,Fast Propagation Segment" bitfld.long 0x14 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7" rgroup.long 0xC08++0x3 line.long 0x0 "FDCRC,CAN FD CRC Register" hexmask.long.byte 0x0 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC" hexmask.long.tbyte 0x0 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value" group.long 0xC0C++0xB line.long 0x0 "ERFCR,Enhanced Rx FIFO Control Register" bitfld.long 0x0 31. "ERFEN,Enhanced Rx FIFO enable" "0: Enhanced Rx FIFO is disabled,1: Enhanced Rx FIFO is enabled" hexmask.long.byte 0x0 26.--30. 1. "DMALW,DMA Last Word" newline hexmask.long.byte 0x0 16.--22. 1. "NEXIF,Number of Extended ID Filter Elements" hexmask.long.byte 0x0 8.--13. 1. "NFE,Number of Enhanced Rx FIFO Filter Elements" newline hexmask.long.byte 0x0 0.--4. 1. "ERFWM,Enhanced Rx FIFO Watermark" line.long 0x4 "ERFIER,Enhanced Rx FIFO Interrupt Enable Register" bitfld.long 0x4 31. "ERFUFWIE,Enhanced Rx FIFO Underflow Interrupt Enable" "0: Enhanced Rx FIFO Underflow interrupt is disabled,1: Enhanced Rx FIFO Underflow interrupt is enabled" bitfld.long 0x4 30. "ERFOVFIE,Enhanced Rx FIFO Overflow Interrupt Enable" "0: Enhanced Rx FIFO Overflow is disabled,1: Enhanced Rx FIFO Overflow is enabled" newline bitfld.long 0x4 29. "ERFWMIIE,Enhanced Rx FIFO Watermark Indication Interrupt Enable" "0: Enhanced Rx FIFO Watermark interrupt is disabled,1: Enhanced Rx FIFO Watermark interrupt is enabled" bitfld.long 0x4 28. "ERFDAIE,Enhanced Rx FIFO Data Available Interrupt Enable" "0: Enhanced Rx FIFO Data Available interrupt is..,1: Enhanced Rx FIFO Data Available interrupt is.." line.long 0x8 "ERFSR,Enhanced Rx FIFO Status Register" eventfld.long 0x8 31. "ERFUFW,Enhanced Rx FIFO Underflow" "0: No such occurrence,1: Enhanced Rx FIFO underflow" eventfld.long 0x8 30. "ERFOVF,Enhanced Rx FIFO Overflow" "0: No such occurrence,1: Enhanced Rx FIFO overflow" newline eventfld.long 0x8 29. "ERFWMI,Enhanced Rx FIFO Watermark Indication" "0: No such occurrence,1: The number of messages in FIFO is greater than.." eventfld.long 0x8 28. "ERFDA,Enhanced Rx FIFO Data Available" "0: No such occurrence,1: There is at least one message stored in Enhanced.." newline bitfld.long 0x8 27. "ERFCLR,Enhanced Rx FIFO Clear" "0: No effect,1: Clear Enhanced Rx FIFO content" rbitfld.long 0x8 17. "ERFE,Enhanced Rx FIFO empty" "0: Enhanced Rx FIFO is not empty,1: Enhanced Rx FIFO is empty" newline rbitfld.long 0x8 16. "ERFF,Enhanced Rx FIFO full" "0: Enhanced Rx FIFO is not full,1: Enhanced Rx FIFO is full" hexmask.long.byte 0x8 0.--5. 1. "ERFEL,Enhanced Rx FIFO Elements" repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC30)++0x3 line.long 0x0 "HR_TIME_STAMP[$1],High Resolution Time Stamp" hexmask.long 0x0 0.--31. 1. "TS,High Resolution Time Stamp" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x3000)++0x3 line.long 0x0 "ERFFEL[$1],Enhanced Rx FIFO Filter Element" hexmask.long 0x0 0.--31. 1. "FEL,Filter Element Bits" repeat.end tree.end tree "CAN5" base ad:0x427D0000 group.long 0x0++0xB line.long 0x0 "MCR,Module Configuration Register" bitfld.long 0x0 31. "MDIS,Module Disable" "0: Enable the FlexCAN module.,1: Disable the FlexCAN module." bitfld.long 0x0 30. "FRZ,Freeze Enable" "0: Not enabled to enter Freeze mode.,1: Enabled to enter Freeze mode." newline bitfld.long 0x0 29. "RFEN,Legacy Rx FIFO Enable" "0: Legacy Rx FIFO not enabled.,1: Legacy Rx FIFO enabled." bitfld.long 0x0 28. "HALT,Halt FlexCAN" "0: No Freeze mode request.,1: Enters Freeze mode if the FRZ bit is asserted." newline rbitfld.long 0x0 27. "NOTRDY,FlexCAN Not Ready" "0: FlexCAN module is either in Normal mode..,1: FlexCAN module is either in Disable mode Doze.." bitfld.long 0x0 26. "WAKMSK,Wake Up Interrupt Mask" "0: Wake Up interrupt is disabled.,1: Wake Up interrupt is enabled." newline bitfld.long 0x0 25. "SOFTRST,Soft Reset" "0: No reset request.,1: Resets the registers affected by soft reset." rbitfld.long 0x0 24. "FRZACK,Freeze Mode Acknowledge" "0: FlexCAN not in Freeze mode prescaler running.,1: FlexCAN in Freeze mode prescaler stopped." newline bitfld.long 0x0 23. "SUPV,Supervisor Mode" "0: FlexCAN is in User mode. Affected registers..,1: FlexCAN is in Supervisor mode. Affected.." bitfld.long 0x0 22. "SLFWAK,Self Wake Up" "0: FlexCAN Self Wake Up feature is disabled.,1: FlexCAN Self Wake Up feature is enabled." newline bitfld.long 0x0 21. "WRNEN,Warning Interrupt Enable" "0: TWRNINT and RWRNINT bits are zero independent of..,1: TWRNINT and RWRNINT bits are set when the.." rbitfld.long 0x0 20. "LPMACK,Low-Power Mode Acknowledge" "0: FlexCAN is not in a low-power mode.,1: FlexCAN is in a low-power mode." newline bitfld.long 0x0 19. "WAKSRC,Wake Up Source" "0: FlexCAN uses the unfiltered Rx input to detect..,1: FlexCAN uses the filtered Rx input to detect.." bitfld.long 0x0 18. "DOZE,Doze Mode Enable" "0: FlexCAN is not enabled to enter low-power mode..,1: FlexCAN is enabled to enter low-power mode when.." newline bitfld.long 0x0 17. "SRXDIS,Self Reception Disable" "0: Self-reception enabled.,1: Self-reception disabled." bitfld.long 0x0 16. "IRMQ,Individual Rx Masking And Queue Enable" "0: Individual Rx masking and queue feature are..,1: Individual Rx masking and queue feature are.." newline bitfld.long 0x0 15. "DMA,DMA Enable" "0: DMA feature for Legacy RX FIFO or Enhanced Rx..,1: DMA feature for Legacy RX FIFO or Enhanced Rx.." bitfld.long 0x0 13. "LPRIOEN,Local Priority Enable" "0: Local Priority disabled.,1: Local Priority enabled." newline bitfld.long 0x0 12. "AEN,Abort Enable" "0: Abort disabled.,1: Abort enabled." bitfld.long 0x0 11. "FDEN,CAN FD operation enable" "0: CAN FD is disabled. FlexCAN is able to receive..,1: CAN FD is enabled. FlexCAN is able to receive.." newline bitfld.long 0x0 8.--9. "IDAM,ID Acceptance Mode" "0: Format A: One full ID (standard and extended)..,1: Format B: Two full standard IDs or two partial..,2: Format C: Four partial 8-bit standard IDs per ID..,3: Format D: All frames rejected." hexmask.long.byte 0x0 0.--6. 1. "MAXMB,Number Of The Last Message Buffer" line.long 0x4 "CTRL1,Control 1 Register" hexmask.long.byte 0x4 24.--31. 1. "PRESDIV,Prescaler Division Factor" bitfld.long 0x4 22.--23. "RJW,Resync Jump Width" "0,1,2,3" newline bitfld.long 0x4 19.--21. "PSEG1,Phase Segment 1" "0,1,2,3,4,5,6,7" bitfld.long 0x4 16.--18. "PSEG2,Phase Segment 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x4 15. "BOFFMSK,Bus Off Interrupt Mask" "0: Bus Off interrupt disabled.,1: Bus Off interrupt enabled." bitfld.long 0x4 14. "ERRMSK,Error Interrupt Mask" "0: Error interrupt disabled.,1: Error interrupt enabled." newline bitfld.long 0x4 13. "CLKSRC,CAN Engine Clock Source" "0: The CAN engine clock source is the oscillator..,1: The CAN engine clock source is the peripheral.." bitfld.long 0x4 12. "LPB,Loop Back Mode" "0: Loop Back disabled.,1: Loop Back enabled." newline bitfld.long 0x4 11. "TWRNMSK,Tx Warning Interrupt Mask" "0: Tx Warning interrupt disabled.,1: Tx Warning interrupt enabled." bitfld.long 0x4 10. "RWRNMSK,Rx Warning Interrupt Mask" "0: Rx Warning interrupt disabled.,1: Rx Warning interrupt enabled." newline bitfld.long 0x4 7. "SMP,CAN Bit Sampling" "0: Just one sample is used to determine the bit..,1: Three samples are used to determine the value of.." bitfld.long 0x4 6. "BOFFREC,Bus Off Recovery" "0: Automatic recovering from Bus Off state enabled.,1: Automatic recovering from Bus Off state disabled." newline bitfld.long 0x4 5. "TSYN,Timer Sync" "0: Timer sync feature disabled,1: Timer sync feature enabled" bitfld.long 0x4 4. "LBUF,Lowest Buffer Transmitted First" "0: Buffer with highest priority is transmitted first.,1: Lowest number buffer is transmitted first." newline bitfld.long 0x4 3. "LOM,Listen-Only Mode" "0: Listen-Only mode is deactivated.,1: FlexCAN module operates in Listen-Only mode." bitfld.long 0x4 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7" line.long 0x8 "TIMER,Free Running Timer" hexmask.long.word 0x8 0.--15. 1. "TIMER,Timer Value" group.long 0x10++0x27 line.long 0x0 "RXMGMASK,Rx Mailboxes Global Mask Register" hexmask.long 0x0 0.--31. 1. "MG,Rx Mailboxes Global Mask Bits" line.long 0x4 "RX14MASK,Rx 14 Mask Register" hexmask.long 0x4 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits" line.long 0x8 "RX15MASK,Rx 15 Mask Register" hexmask.long 0x8 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits" line.long 0xC "ECR,Error Counter" hexmask.long.byte 0xC 24.--31. 1. "RXERRCNT_FAST,Receive Error Counter for fast bits" hexmask.long.byte 0xC 16.--23. 1. "TXERRCNT_FAST,Transmit Error Counter for fast bits" newline hexmask.long.byte 0xC 8.--15. 1. "RXERRCNT,Receive Error Counter" hexmask.long.byte 0xC 0.--7. 1. "TXERRCNT,Transmit Error Counter" line.long 0x10 "ESR1,Error and Status 1 Register" rbitfld.long 0x10 31. "BIT1ERR_FAST,Bit1 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as recessive is received.." rbitfld.long 0x10 30. "BIT0ERR_FAST,Bit0 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." newline rbitfld.long 0x10 28. "CRCERR_FAST,Cyclic Redundancy Check Error in the CRC field of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 27. "FRMERR_FAST,Form Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A form error occurred since last read of this.." newline rbitfld.long 0x10 26. "STFERR_FAST,Stuffing Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence.,1: A stuffing error occurred since last read of.." eventfld.long 0x10 21. "ERROVR,Error Overrun" "0: Overrun has not occurred.,1: Overrun has occurred." newline eventfld.long 0x10 20. "ERRINT_FAST,Error interrupt for errors detected in Data Phase of CAN FD frames with BRS bit set" "0: No such occurrence.,1: Indicates setting of any error bit detected in.." eventfld.long 0x10 19. "BOFFDONEINT,Bus Off Done Interrupt" "0: No such occurrence.,1: FlexCAN module has completed Bus Off process." newline rbitfld.long 0x10 18. "SYNCH,CAN Synchronization Status" "0: FlexCAN is not synchronized to the CAN bus.,1: FlexCAN is synchronized to the CAN bus." eventfld.long 0x10 17. "TWRNINT,Tx Warning Interrupt Flag" "0: No such occurrence.,1: The Tx error counter transitioned from less than.." newline eventfld.long 0x10 16. "RWRNINT,Rx Warning Interrupt Flag" "0: No such occurrence.,1: The Rx error counter transitioned from less than.." rbitfld.long 0x10 15. "BIT1ERR,Bit1 Error" "0: No such occurrence.,1: At least one bit sent as recessive is received.." newline rbitfld.long 0x10 14. "BIT0ERR,Bit0 Error" "0: No such occurrence.,1: At least one bit sent as dominant is received as.." rbitfld.long 0x10 13. "ACKERR,Acknowledge Error" "0: No such occurrence.,1: An ACK error occurred since last read of this.." newline rbitfld.long 0x10 12. "CRCERR,Cyclic Redundancy Check Error" "0: No such occurrence.,1: A CRC error occurred since last read of this.." rbitfld.long 0x10 11. "FRMERR,Form Error" "0: No such occurrence.,1: A Form Error occurred since last read of this.." newline rbitfld.long 0x10 10. "STFERR,Stuffing Error" "0: No such occurrence.,1: A stuffing error occurred since last read of.." rbitfld.long 0x10 9. "TXWRN,TX Error Warning" "0: No such occurrence.,1: TXERRCNT is greater than or equal to 96." newline rbitfld.long 0x10 8. "RXWRN,Rx Error Warning" "0: No such occurrence.,1: RXERRCNT is greater than or equal to 96." rbitfld.long 0x10 7. "IDLE,IDLE" "0: No such occurrence.,1: CAN bus is now IDLE." newline rbitfld.long 0x10 6. "TX,FlexCAN In Transmission" "0: FlexCAN is not transmitting a message.,1: FlexCAN is transmitting a message." rbitfld.long 0x10 4.--5. "FLTCONF,Fault Confinement State" "0: Bus Off,1: Error Passive,2: Bus Off,3: Bus Off" newline rbitfld.long 0x10 3. "RX,FlexCAN In Reception" "0: FlexCAN is not receiving a message.,1: FlexCAN is receiving a message." eventfld.long 0x10 2. "BOFFINT,Bus Off Interrupt" "0: No such occurrence.,1: FlexCAN module entered Bus Off state." newline eventfld.long 0x10 1. "ERRINT,Error Interrupt" "0: No such occurrence.,1: Indicates setting of any error bit in the Error.." eventfld.long 0x10 0. "WAKINT,Wake-Up Interrupt" "0: No such occurrence.,1: Indicates a recessive to dominant transition was.." line.long 0x14 "IMASK2,Interrupt Masks 2 Register" hexmask.long 0x14 0.--31. 1. "BUF63TO32M,Buffer MBi Mask" line.long 0x18 "IMASK1,Interrupt Masks 1 Register" hexmask.long 0x18 0.--31. 1. "BUF31TO0M,Buffer MBi Mask" line.long 0x1C "IFLAG2,Interrupt Flags 2 Register" hexmask.long 0x1C 0.--31. 1. "BUF63TO32I,Buffer MBi Interrupt" line.long 0x20 "IFLAG1,Interrupt Flags 1 Register" hexmask.long.tbyte 0x20 8.--31. 1. "BUF31TO8I,Buffer MBi Interrupt" eventfld.long 0x20 7. "BUF7I,Buffer MB7 Interrupt Or Legacy Rx FIFO Overflow" "0: No occurrence of MB7 completing..,1: MB7 completed transmission/reception when.." newline eventfld.long 0x20 6. "BUF6I,Buffer MB6 Interrupt Or Legacy Rx FIFO Warning" "0: No occurrence of MB6 completing..,1: MB6 completed transmission/reception when.." eventfld.long 0x20 5. "BUF5I,Buffer MB5 Interrupt Or Frames available in Legacy Rx FIFO" "0: No occurrence of MB5 completing..,1: MB5 completed transmission/reception when.." newline hexmask.long.byte 0x20 1.--4. 1. "BUF4TO1I,Buffer MBi Interrupt Or Reserved" eventfld.long 0x20 0. "BUF0I,Buffer MB0 Interrupt Or Clear Legacy FIFO bit" "0: The corresponding buffer has no occurrence of..,1: The corresponding buffer has successfully.." line.long 0x24 "CTRL2,Control 2 Register" bitfld.long 0x24 31. "ERRMSK_FAST,Error Interrupt Mask for errors detected in the data phase of fast CAN FD frames" "0: ERRINT_FAST error interrupt disabled.,1: ERRINT_FAST error interrupt enabled." bitfld.long 0x24 30. "BOFFDONEMSK,Bus Off Done Interrupt Mask" "0: Bus off done interrupt disabled.,1: Bus off done interrupt enabled." newline bitfld.long 0x24 29. "ECRWRE,Error-correction Configuration Register Write Enable" "0: Disable update.,1: Enable update." bitfld.long 0x24 28. "WRMFRZ,Write-Access To Memory In Freeze Mode" "0: Maintain the write access restrictions.,1: Enable unrestricted write access to FlexCAN.." newline hexmask.long.byte 0x24 24.--27. 1. "RFFN,Number Of Legacy Rx FIFO Filters" hexmask.long.byte 0x24 19.--23. 1. "TASD,Tx Arbitration Start Delay" newline bitfld.long 0x24 18. "MRP,Mailboxes Reception Priority" "0: Matching starts from Legacy Rx FIFO or Enhanced..,1: Matching starts from mailboxes and continues on.." bitfld.long 0x24 17. "RRS,Remote Request Storing" "0: Remote response frame is generated.,1: Remote request frame is stored." newline bitfld.long 0x24 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0: Rx mailbox filter's IDE bit is always compared..,1: Enables the comparison of both Rx mailbox.." bitfld.long 0x24 15. "TIMER_SRC,Timer Source" "0: The free running timer is clocked by the CAN bit..,1: The free running timer is clocked by an external.." newline bitfld.long 0x24 14. "PREXCEN,Protocol Exception Enable" "0: Protocol exception is disabled.,1: Protocol exception is enabled." bitfld.long 0x24 13. "BTE,Bit Timing Expansion enable" "0: CAN Bit timing expansion is disabled.,1: CAN bit timing expansion is enabled." newline bitfld.long 0x24 12. "ISOCANFDEN,ISO CAN FD Enable" "0: FlexCAN operates using the non-ISO CAN FD..,1: FlexCAN operates using the ISO CAN FD protocol.." bitfld.long 0x24 11. "EDFLTDIS,Edge Filter Disable" "0: Edge filter is enabled,1: Edge filter is disabled" newline bitfld.long 0x24 8.--9. "MBTSBASE,Message Buffer Time Stamp Base" "0: Message buffer time stamp base is TIMER,1: Message buffer time stamp base is lower 16 bits..,2: Message buffer time stamp base is upper 16 bits..,?" bitfld.long 0x24 6.--7. "TSTAMPCAP,Time Stamp Capture Point" "0: The high resolution time stamp capture is disabled,1: The high resolution time stamp is captured in..,2: The high resolution time stamp is captured in..,3: The high resolution time stamp is captured in.." rgroup.long 0x38++0x3 line.long 0x0 "ESR2,Error and Status 2 Register" hexmask.long.byte 0x0 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox" bitfld.long 0x0 14. "VPS,Valid Priority Status" "0: Contents of IMB and LPTM are invalid.,1: Contents of IMB and LPTM are valid." newline bitfld.long 0x0 13. "IMB,Inactive Mailbox" "0: If ESR2[VPS] is asserted the ESR2[LPTM] is not..,1: If ESR2[VPS] is asserted there is at least one.." rgroup.long 0x44++0x3 line.long 0x0 "CRCR,CRC Register" hexmask.long.byte 0x0 16.--22. 1. "MBCRC,CRC Mailbox" hexmask.long.word 0x0 0.--14. 1. "TXCRC,Transmitted CRC value" group.long 0x48++0x3 line.long 0x0 "RXFGMASK,Legacy Rx FIFO Global Mask Register" hexmask.long 0x0 0.--31. 1. "FGM,Legacy Rx FIFO Global Mask Bits" rgroup.long 0x4C++0x3 line.long 0x0 "RXFIR,Legacy Rx FIFO Information Register" hexmask.long.word 0x0 0.--8. 1. "IDHIT,Identifier Acceptance Filter Hit Indicator" group.long 0x50++0x3 line.long 0x0 "CBT,CAN Bit Timing Register" bitfld.long 0x0 31. "BTF,Bit Timing Format Enable" "0: Extended bit time definitions disabled.,1: Extended bit time definitions enabled." hexmask.long.word 0x0 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor" newline hexmask.long.byte 0x0 16.--20. 1. "ERJW,Extended Resync Jump Width" hexmask.long.byte 0x0 10.--15. 1. "EPROPSEG,Extended Propagation Segment" newline hexmask.long.byte 0x0 5.--9. 1. "EPSEG1,Extended Phase Segment 1" hexmask.long.byte 0x0 0.--4. 1. "EPSEG2,Extended Phase Segment 2" group.long 0x6C++0x3 line.long 0x0 "IMASK3,Interrupt Masks 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64M,Buffer MBi Mask" group.long 0x74++0x3 line.long 0x0 "IFLAG3,Interrupt Flags 3 Register" hexmask.long 0x0 0.--31. 1. "BUF95TO64,Buffer MBi Interrupt" group.long 0x80++0x3 line.long 0x0 "CS0,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_16B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_32B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x3 line.long 0x0 "MB0_64B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x80++0x7 line.long 0x0 "MB0_8B_CS,Message Buffer 0 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID0,Message Buffer 0 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_16B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_32B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x3 line.long 0x0 "MB0_64B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x84++0x7 line.long 0x0 "MB0_8B_ID,Message Buffer 0 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_16B_WORD0,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_32B_WORD0,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_64B_WORD0,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x3 line.long 0x0 "MB0_8B_WORD0,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x88++0x7 line.long 0x0 "WORD00,Message Buffer 0 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_16B_WORD1,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_32B_WORD1,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_64B_WORD1,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x3 line.long 0x0 "MB0_8B_WORD1,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x8C++0x7 line.long 0x0 "WORD10,Message Buffer 0 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS1,Message Buffer 1 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x90++0x3 line.long 0x0 "MB0_16B_WORD2,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_32B_WORD2,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x3 line.long 0x0 "MB0_64B_WORD2,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x90++0x7 line.long 0x0 "MB1_8B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID1,Message Buffer 1 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x94++0x3 line.long 0x0 "MB0_16B_WORD3,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_32B_WORD3,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x3 line.long 0x0 "MB0_64B_WORD3,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x94++0x7 line.long 0x0 "MB1_8B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_32B_WORD4,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB0_64B_WORD4,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x98++0x3 line.long 0x0 "MB1_16B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x98++0x3 line.long 0x0 "MB1_8B_WORD0,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x98++0x7 line.long 0x0 "WORD01,Message Buffer 1 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_32B_WORD5,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB0_64B_WORD5,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x3 line.long 0x0 "MB1_16B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x9C++0x3 line.long 0x0 "MB1_8B_WORD1,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x9C++0x7 line.long 0x0 "WORD11,Message Buffer 1 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS2,Message Buffer 2 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA0++0x3 line.long 0x0 "MB0_32B_WORD6,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB0_64B_WORD6,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x3 line.long 0x0 "MB1_16B_WORD0,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA0++0x7 line.long 0x0 "MB2_8B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID2,Message Buffer 2 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xA4++0x3 line.long 0x0 "MB0_32B_WORD7,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB0_64B_WORD7,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x3 line.long 0x0 "MB1_16B_WORD1,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xA4++0x7 line.long 0x0 "MB2_8B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD8,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_16B_WORD2,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x3 line.long 0x0 "MB1_32B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xA8++0x3 line.long 0x0 "MB2_8B_WORD0,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xA8++0x7 line.long 0x0 "WORD02,Message Buffer 2 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD9,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_16B_WORD3,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x3 line.long 0x0 "MB1_32B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xAC++0x3 line.long 0x0 "MB2_8B_WORD1,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xAC++0x7 line.long 0x0 "WORD12,Message Buffer 2 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS3,Message Buffer 3 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x3 line.long 0x0 "MB0_64B_WORD10,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB1_32B_WORD0,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB0++0x3 line.long 0x0 "MB2_16B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xB0++0x7 line.long 0x0 "MB3_8B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID3,Message Buffer 3 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x3 line.long 0x0 "MB0_64B_WORD11,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB1_32B_WORD1,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xB4++0x3 line.long 0x0 "MB2_16B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xB4++0x7 line.long 0x0 "MB3_8B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB0_64B_WORD12,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB1_32B_WORD2,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB2_16B_WORD0,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x3 line.long 0x0 "MB3_8B_WORD0,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xB8++0x7 line.long 0x0 "WORD03,Message Buffer 3 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB0_64B_WORD13,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB1_32B_WORD3,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB2_16B_WORD1,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x3 line.long 0x0 "MB3_8B_WORD1,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xBC++0x7 line.long 0x0 "WORD13,Message Buffer 3 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS4,Message Buffer 4 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC0++0x3 line.long 0x0 "MB0_64B_WORD14,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB1_32B_WORD4,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x3 line.long 0x0 "MB2_16B_WORD2,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xC0++0x7 line.long 0x0 "MB4_8B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID4,Message Buffer 4 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xC4++0x3 line.long 0x0 "MB0_64B_WORD15,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB1_32B_WORD5,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x3 line.long 0x0 "MB2_16B_WORD3,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xC4++0x7 line.long 0x0 "MB4_8B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_32B_WORD6,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x3 line.long 0x0 "MB1_64B_CS,Message Buffer 1 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB3_16B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xC8++0x3 line.long 0x0 "MB4_8B_WORD0,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xC8++0x7 line.long 0x0 "WORD04,Message Buffer 4 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_32B_WORD7,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x3 line.long 0x0 "MB1_64B_ID,Message Buffer 1 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB3_16B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xCC++0x3 line.long 0x0 "MB4_8B_WORD1,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xCC++0x7 line.long 0x0 "WORD14,Message Buffer 4 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS5,Message Buffer 5 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB1_64B_WORD0,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x3 line.long 0x0 "MB2_32B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xD0++0x3 line.long 0x0 "MB3_16B_WORD0,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD0++0x7 line.long 0x0 "MB5_8B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID5,Message Buffer 5 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB1_64B_WORD1,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x3 line.long 0x0 "MB2_32B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xD4++0x3 line.long 0x0 "MB3_16B_WORD1,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xD4++0x7 line.long 0x0 "MB5_8B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD2,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB2_32B_WORD0,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB3_16B_WORD2,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x3 line.long 0x0 "MB5_8B_WORD0,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xD8++0x7 line.long 0x0 "WORD05,Message Buffer 5 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD3,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB2_32B_WORD1,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB3_16B_WORD3,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x3 line.long 0x0 "MB5_8B_WORD1,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xDC++0x7 line.long 0x0 "WORD15,Message Buffer 5 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS6,Message Buffer 6 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x3 line.long 0x0 "MB1_64B_WORD4,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB2_32B_WORD2,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xE0++0x3 line.long 0x0 "MB4_16B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xE0++0x7 line.long 0x0 "MB6_8B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID6,Message Buffer 6 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x3 line.long 0x0 "MB1_64B_WORD5,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB2_32B_WORD3,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xE4++0x3 line.long 0x0 "MB4_16B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xE4++0x7 line.long 0x0 "MB6_8B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD6,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB2_32B_WORD4,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB4_16B_WORD0,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x3 line.long 0x0 "MB6_8B_WORD0,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xE8++0x7 line.long 0x0 "WORD06,Message Buffer 6 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD7,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB2_32B_WORD5,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB4_16B_WORD1,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x3 line.long 0x0 "MB6_8B_WORD1,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xEC++0x7 line.long 0x0 "WORD16,Message Buffer 6 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS7,Message Buffer 7 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF0++0x3 line.long 0x0 "MB1_64B_WORD8,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB2_32B_WORD6,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x3 line.long 0x0 "MB4_16B_WORD2,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0xF0++0x7 line.long 0x0 "MB7_8B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID7,Message Buffer 7 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xF4++0x3 line.long 0x0 "MB1_64B_WORD9,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB2_32B_WORD7,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x3 line.long 0x0 "MB4_16B_WORD3,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0xF4++0x7 line.long 0x0 "MB7_8B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD10,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x3 line.long 0x0 "MB3_32B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB5_16B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0xF8++0x3 line.long 0x0 "MB7_8B_WORD0,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0xF8++0x7 line.long 0x0 "WORD07,Message Buffer 7 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD11,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x3 line.long 0x0 "MB3_32B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB5_16B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0xFC++0x3 line.long 0x0 "MB7_8B_WORD1,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0xFC++0x7 line.long 0x0 "WORD17,Message Buffer 7 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS8,Message Buffer 8 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x100++0x3 line.long 0x0 "MB1_64B_WORD12,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB3_32B_WORD0,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x3 line.long 0x0 "MB5_16B_WORD0,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x100++0x7 line.long 0x0 "MB8_8B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID8,Message Buffer 8 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x104++0x3 line.long 0x0 "MB1_64B_WORD13,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB3_32B_WORD1,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x3 line.long 0x0 "MB5_16B_WORD1,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x104++0x7 line.long 0x0 "MB8_8B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB1_64B_WORD14,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB3_32B_WORD2,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB5_16B_WORD2,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x108++0x3 line.long 0x0 "MB8_8B_WORD0,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x108++0x7 line.long 0x0 "WORD08,Message Buffer 8 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB1_64B_WORD15,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB3_32B_WORD3,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB5_16B_WORD3,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x3 line.long 0x0 "MB8_8B_WORD1,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x10C++0x7 line.long 0x0 "WORD18,Message Buffer 8 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS9,Message Buffer 9 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB2_64B_CS,Message Buffer 2 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x3 line.long 0x0 "MB3_32B_WORD4,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x110++0x3 line.long 0x0 "MB6_16B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x110++0x7 line.long 0x0 "MB9_8B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID9,Message Buffer 9 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB2_64B_ID,Message Buffer 2 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x3 line.long 0x0 "MB3_32B_WORD5,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x114++0x3 line.long 0x0 "MB6_16B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x114++0x7 line.long 0x0 "MB9_8B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB2_64B_WORD0,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB3_32B_WORD6,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB6_16B_WORD0,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x3 line.long 0x0 "MB9_8B_WORD0,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x118++0x7 line.long 0x0 "WORD09,Message Buffer 9 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB2_64B_WORD1,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB3_32B_WORD7,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB6_16B_WORD1,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x3 line.long 0x0 "MB9_8B_WORD1,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x11C++0x7 line.long 0x0 "WORD19,Message Buffer 9 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS10,Message Buffer 10 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB10_8B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x3 line.long 0x0 "MB2_64B_WORD2,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x120++0x3 line.long 0x0 "MB4_32B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x120++0x7 line.long 0x0 "MB6_16B_WORD2,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID10,Message Buffer 10 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB10_8B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x3 line.long 0x0 "MB2_64B_WORD3,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x124++0x3 line.long 0x0 "MB4_32B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x124++0x7 line.long 0x0 "MB6_16B_WORD3,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD0,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB2_64B_WORD4,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB4_32B_WORD0,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x128++0x3 line.long 0x0 "MB7_16B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x128++0x7 line.long 0x0 "WORD010,Message Buffer 10 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_8B_WORD1,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB2_64B_WORD5,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB4_32B_WORD1,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x12C++0x3 line.long 0x0 "MB7_16B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x12C++0x7 line.long 0x0 "WORD110,Message Buffer 10 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS11,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB11_8B_CS,Message Buffer 11 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x130++0x3 line.long 0x0 "MB2_64B_WORD6,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x130++0x3 line.long 0x0 "MB4_32B_WORD2,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x130++0x7 line.long 0x0 "MB7_16B_WORD0,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID11,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB11_8B_ID,Message Buffer 11 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x134++0x3 line.long 0x0 "MB2_64B_WORD7,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x134++0x3 line.long 0x0 "MB4_32B_WORD3,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x134++0x7 line.long 0x0 "MB7_16B_WORD1,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD0,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB2_64B_WORD8,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB4_32B_WORD4,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x138++0x3 line.long 0x0 "MB7_16B_WORD2,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x138++0x7 line.long 0x0 "WORD011,Message Buffer 11 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_8B_WORD1,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB2_64B_WORD9,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB4_32B_WORD5,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x3 line.long 0x0 "MB7_16B_WORD3,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x13C++0x7 line.long 0x0 "WORD111,Message Buffer 11 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS12,Message Buffer 12 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB12_8B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x140++0x3 line.long 0x0 "MB2_64B_WORD10,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x140++0x3 line.long 0x0 "MB4_32B_WORD6,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x140++0x7 line.long 0x0 "MB8_16B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID12,Message Buffer 12 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB12_8B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x144++0x3 line.long 0x0 "MB2_64B_WORD11,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x144++0x3 line.long 0x0 "MB4_32B_WORD7,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x144++0x7 line.long 0x0 "MB8_16B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_8B_WORD0,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB2_64B_WORD12,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x148++0x3 line.long 0x0 "MB5_32B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x148++0x3 line.long 0x0 "MB8_16B_WORD0,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x148++0x7 line.long 0x0 "WORD012,Message Buffer 12 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_8B_WORD1,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB2_64B_WORD13,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x3 line.long 0x0 "MB5_32B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x14C++0x3 line.long 0x0 "MB8_16B_WORD1,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x14C++0x7 line.long 0x0 "WORD112,Message Buffer 12 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS13,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB13_8B_CS,Message Buffer 13 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x150++0x3 line.long 0x0 "MB2_64B_WORD14,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x150++0x3 line.long 0x0 "MB5_32B_WORD0,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x150++0x7 line.long 0x0 "MB8_16B_WORD2,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID13,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB13_8B_ID,Message Buffer 13 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x154++0x3 line.long 0x0 "MB2_64B_WORD15,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x154++0x3 line.long 0x0 "MB5_32B_WORD1,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x154++0x7 line.long 0x0 "MB8_16B_WORD3,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD0,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB3_64B_CS,Message Buffer 3 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x3 line.long 0x0 "MB5_32B_WORD2,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x158++0x3 line.long 0x0 "MB9_16B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x158++0x7 line.long 0x0 "WORD013,Message Buffer 13 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_8B_WORD1,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB3_64B_ID,Message Buffer 3 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x3 line.long 0x0 "MB5_32B_WORD3,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x15C++0x3 line.long 0x0 "MB9_16B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x15C++0x7 line.long 0x0 "WORD113,Message Buffer 13 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS14,Message Buffer 14 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB14_8B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x160++0x3 line.long 0x0 "MB3_64B_WORD0,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x160++0x3 line.long 0x0 "MB5_32B_WORD4,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x160++0x7 line.long 0x0 "MB9_16B_WORD0,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID14,Message Buffer 14 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB14_8B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x164++0x3 line.long 0x0 "MB3_64B_WORD1,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x164++0x3 line.long 0x0 "MB5_32B_WORD5,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x164++0x7 line.long 0x0 "MB9_16B_WORD1,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD0,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB3_64B_WORD2,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB5_32B_WORD6,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x168++0x3 line.long 0x0 "MB9_16B_WORD2,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x168++0x7 line.long 0x0 "WORD014,Message Buffer 14 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_8B_WORD1,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB3_64B_WORD3,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB5_32B_WORD7,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x3 line.long 0x0 "MB9_16B_WORD3,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x16C++0x7 line.long 0x0 "WORD114,Message Buffer 14 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS15,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB10_16B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB15_8B_CS,Message Buffer 15 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x170++0x3 line.long 0x0 "MB3_64B_WORD4,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x170++0x7 line.long 0x0 "MB6_32B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID15,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB10_16B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB15_8B_ID,Message Buffer 15 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x174++0x3 line.long 0x0 "MB3_64B_WORD5,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x174++0x7 line.long 0x0 "MB6_32B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_16B_WORD0,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB15_8B_WORD0,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB3_64B_WORD6,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x178++0x3 line.long 0x0 "MB6_32B_WORD0,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x178++0x7 line.long 0x0 "WORD015,Message Buffer 15 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_16B_WORD1,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB15_8B_WORD1,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB3_64B_WORD7,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x3 line.long 0x0 "MB6_32B_WORD1,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x17C++0x7 line.long 0x0 "WORD115,Message Buffer 15 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS16,Message Buffer 16 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB10_16B_WORD2,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x180++0x3 line.long 0x0 "MB16_8B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x180++0x3 line.long 0x0 "MB3_64B_WORD8,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x180++0x7 line.long 0x0 "MB6_32B_WORD2,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID16,Message Buffer 16 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB10_16B_WORD3,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x184++0x3 line.long 0x0 "MB16_8B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x184++0x3 line.long 0x0 "MB3_64B_WORD9,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x184++0x7 line.long 0x0 "MB6_32B_WORD3,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x188++0x3 line.long 0x0 "MB16_8B_WORD0,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB3_64B_WORD10,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x188++0x3 line.long 0x0 "MB6_32B_WORD4,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x188++0x7 line.long 0x0 "WORD016,Message Buffer 16 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x18C++0x3 line.long 0x0 "MB16_8B_WORD1,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB3_64B_WORD11,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x3 line.long 0x0 "MB6_32B_WORD5,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x18C++0x7 line.long 0x0 "WORD116,Message Buffer 16 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS17,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB11_16B_WORD0,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x190++0x3 line.long 0x0 "MB17_8B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x190++0x3 line.long 0x0 "MB3_64B_WORD12,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x190++0x7 line.long 0x0 "MB6_32B_WORD6,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID17,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB11_16B_WORD1,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x194++0x3 line.long 0x0 "MB17_8B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x194++0x3 line.long 0x0 "MB3_64B_WORD13,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x194++0x7 line.long 0x0 "MB6_32B_WORD7,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD2,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB17_8B_WORD0,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB3_64B_WORD14,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x198++0x3 line.long 0x0 "MB7_32B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x198++0x7 line.long 0x0 "WORD017,Message Buffer 17 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_16B_WORD3,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB17_8B_WORD1,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB3_64B_WORD15,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x19C++0x3 line.long 0x0 "MB7_32B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x19C++0x7 line.long 0x0 "WORD117,Message Buffer 17 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS18,Message Buffer 18 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB12_16B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB18_8B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x3 line.long 0x0 "MB4_64B_CS,Message Buffer 4 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1A0++0x7 line.long 0x0 "MB7_32B_WORD0,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID18,Message Buffer 18 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB12_16B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB18_8B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x3 line.long 0x0 "MB4_64B_ID,Message Buffer 4 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1A4++0x7 line.long 0x0 "MB7_32B_WORD1,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD0,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB18_8B_WORD0,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB4_64B_WORD0,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x3 line.long 0x0 "MB7_32B_WORD2,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1A8++0x7 line.long 0x0 "WORD018,Message Buffer 18 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_16B_WORD1,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB18_8B_WORD1,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB4_64B_WORD1,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x3 line.long 0x0 "MB7_32B_WORD3,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1AC++0x7 line.long 0x0 "WORD118,Message Buffer 18 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS19,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB12_16B_WORD2,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x3 line.long 0x0 "MB19_8B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B0++0x3 line.long 0x0 "MB4_64B_WORD2,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1B0++0x7 line.long 0x0 "MB7_32B_WORD4,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID19,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB12_16B_WORD3,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x3 line.long 0x0 "MB19_8B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1B4++0x3 line.long 0x0 "MB4_64B_WORD3,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1B4++0x7 line.long 0x0 "MB7_32B_WORD5,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1B8++0x3 line.long 0x0 "MB19_8B_WORD0,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB4_64B_WORD4,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x3 line.long 0x0 "MB7_32B_WORD6,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1B8++0x7 line.long 0x0 "WORD019,Message Buffer 19 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1BC++0x3 line.long 0x0 "MB19_8B_WORD1,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB4_64B_WORD5,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x3 line.long 0x0 "MB7_32B_WORD7,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1BC++0x7 line.long 0x0 "WORD119,Message Buffer 19 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS20,Message Buffer 20 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB13_16B_WORD0,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x3 line.long 0x0 "MB20_8B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1C0++0x3 line.long 0x0 "MB4_64B_WORD6,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x1C0++0x7 line.long 0x0 "MB8_32B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID20,Message Buffer 20 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB13_16B_WORD1,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x3 line.long 0x0 "MB20_8B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1C4++0x3 line.long 0x0 "MB4_64B_WORD7,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x1C4++0x7 line.long 0x0 "MB8_32B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_16B_WORD2,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB20_8B_WORD0,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB4_64B_WORD8,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x3 line.long 0x0 "MB8_32B_WORD0,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1C8++0x7 line.long 0x0 "WORD020,Message Buffer 20 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_16B_WORD3,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB20_8B_WORD1,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB4_64B_WORD9,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x3 line.long 0x0 "MB8_32B_WORD1,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1CC++0x7 line.long 0x0 "WORD120,Message Buffer 20 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS21,Message Buffer 21 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB14_16B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB21_8B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1D0++0x3 line.long 0x0 "MB4_64B_WORD10,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x1D0++0x7 line.long 0x0 "MB8_32B_WORD2,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID21,Message Buffer 21 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB14_16B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB21_8B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1D4++0x3 line.long 0x0 "MB4_64B_WORD11,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x1D4++0x7 line.long 0x0 "MB8_32B_WORD3,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD0,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB21_8B_WORD0,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB4_64B_WORD12,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x3 line.long 0x0 "MB8_32B_WORD4,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x1D8++0x7 line.long 0x0 "WORD021,Message Buffer 21 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_16B_WORD1,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB21_8B_WORD1,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB4_64B_WORD13,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x3 line.long 0x0 "MB8_32B_WORD5,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x1DC++0x7 line.long 0x0 "WORD121,Message Buffer 21 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS22,Message Buffer 22 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB14_16B_WORD2,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x3 line.long 0x0 "MB22_8B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E0++0x3 line.long 0x0 "MB4_64B_WORD14,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x1E0++0x7 line.long 0x0 "MB8_32B_WORD6,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID22,Message Buffer 22 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB14_16B_WORD3,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x3 line.long 0x0 "MB22_8B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1E4++0x3 line.long 0x0 "MB4_64B_WORD15,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x1E4++0x7 line.long 0x0 "MB8_32B_WORD7,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB22_8B_WORD0,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1E8++0x3 line.long 0x0 "MB5_64B_CS,Message Buffer 5 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x3 line.long 0x0 "MB9_32B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1E8++0x7 line.long 0x0 "WORD022,Message Buffer 22 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB22_8B_WORD1,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1EC++0x3 line.long 0x0 "MB5_64B_ID,Message Buffer 5 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x3 line.long 0x0 "MB9_32B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1EC++0x7 line.long 0x0 "WORD122,Message Buffer 22 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS23,Message Buffer 23 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB15_16B_WORD0,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x3 line.long 0x0 "MB23_8B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x1F0++0x3 line.long 0x0 "MB5_64B_WORD0,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F0++0x7 line.long 0x0 "MB9_32B_WORD0,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID23,Message Buffer 23 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB15_16B_WORD1,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x3 line.long 0x0 "MB23_8B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x1F4++0x3 line.long 0x0 "MB5_64B_WORD1,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1F4++0x7 line.long 0x0 "MB9_32B_WORD1,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD2,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB23_8B_WORD0,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB5_64B_WORD2,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x3 line.long 0x0 "MB9_32B_WORD2,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x1F8++0x7 line.long 0x0 "WORD023,Message Buffer 23 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_16B_WORD3,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB23_8B_WORD1,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB5_64B_WORD3,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x3 line.long 0x0 "MB9_32B_WORD3,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x1FC++0x7 line.long 0x0 "WORD123,Message Buffer 23 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS24,Message Buffer 24 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB16_16B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB24_8B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x200++0x3 line.long 0x0 "MB5_64B_WORD4,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x200++0x7 line.long 0x0 "MB9_32B_WORD4,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID24,Message Buffer 24 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB16_16B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB24_8B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x204++0x3 line.long 0x0 "MB5_64B_WORD5,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x204++0x7 line.long 0x0 "MB9_32B_WORD5,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD0,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB24_8B_WORD0,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB5_64B_WORD6,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x3 line.long 0x0 "MB9_32B_WORD6,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x208++0x7 line.long 0x0 "WORD024,Message Buffer 24 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_16B_WORD1,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB24_8B_WORD1,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB5_64B_WORD7,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x3 line.long 0x0 "MB9_32B_WORD7,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x20C++0x7 line.long 0x0 "WORD124,Message Buffer 24 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS25,Message Buffer 25 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB10_32B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x3 line.long 0x0 "MB16_16B_WORD2,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x210++0x3 line.long 0x0 "MB25_8B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x210++0x7 line.long 0x0 "MB5_64B_WORD8,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID25,Message Buffer 25 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB10_32B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x3 line.long 0x0 "MB16_16B_WORD3,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x214++0x3 line.long 0x0 "MB25_8B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x214++0x7 line.long 0x0 "MB5_64B_WORD9,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD0,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB17_16B_CS,Message Buffer 17 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x218++0x3 line.long 0x0 "MB25_8B_WORD0,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x218++0x3 line.long 0x0 "MB5_64B_WORD10,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x218++0x7 line.long 0x0 "WORD025,Message Buffer 25 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD1,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB17_16B_ID,Message Buffer 17 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x21C++0x3 line.long 0x0 "MB25_8B_WORD1,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x3 line.long 0x0 "MB5_64B_WORD11,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x21C++0x7 line.long 0x0 "WORD125,Message Buffer 25 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS26,Message Buffer 26 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x3 line.long 0x0 "MB10_32B_WORD2,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB17_16B_WORD0,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x220++0x3 line.long 0x0 "MB26_8B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x220++0x7 line.long 0x0 "MB5_64B_WORD12,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID26,Message Buffer 26 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x3 line.long 0x0 "MB10_32B_WORD3,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB17_16B_WORD1,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x224++0x3 line.long 0x0 "MB26_8B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x224++0x7 line.long 0x0 "MB5_64B_WORD13,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD4,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB17_16B_WORD2,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB26_8B_WORD0,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x228++0x3 line.long 0x0 "MB5_64B_WORD14,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x228++0x7 line.long 0x0 "WORD026,Message Buffer 26 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_32B_WORD5,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB17_16B_WORD3,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB26_8B_WORD1,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x3 line.long 0x0 "MB5_64B_WORD15,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x22C++0x7 line.long 0x0 "WORD126,Message Buffer 26 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS27,Message Buffer 27 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB10_32B_WORD6,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x230++0x3 line.long 0x0 "MB18_16B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x3 line.long 0x0 "MB27_8B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x230++0x7 line.long 0x0 "MB6_64B_CS,Message Buffer 6 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID27,Message Buffer 27 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB10_32B_WORD7,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x234++0x3 line.long 0x0 "MB18_16B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x3 line.long 0x0 "MB27_8B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x234++0x7 line.long 0x0 "MB6_64B_ID,Message Buffer 6 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_32B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x238++0x3 line.long 0x0 "MB18_16B_WORD0,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB27_8B_WORD0,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x3 line.long 0x0 "MB6_64B_WORD0,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x238++0x7 line.long 0x0 "WORD027,Message Buffer 27 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x23C++0x3 line.long 0x0 "MB18_16B_WORD1,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB27_8B_WORD1,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x3 line.long 0x0 "MB6_64B_WORD1,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x23C++0x7 line.long 0x0 "WORD127,Message Buffer 27 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS28,Message Buffer 28 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x3 line.long 0x0 "MB11_32B_WORD0,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB18_16B_WORD2,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x240++0x3 line.long 0x0 "MB28_8B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x240++0x7 line.long 0x0 "MB6_64B_WORD2,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID28,Message Buffer 28 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x3 line.long 0x0 "MB11_32B_WORD1,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB18_16B_WORD3,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x244++0x3 line.long 0x0 "MB28_8B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x244++0x7 line.long 0x0 "MB6_64B_WORD3,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD2,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB19_16B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x248++0x3 line.long 0x0 "MB28_8B_WORD0,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x248++0x3 line.long 0x0 "MB6_64B_WORD4,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x248++0x7 line.long 0x0 "WORD028,Message Buffer 28 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD3,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB19_16B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x24C++0x3 line.long 0x0 "MB28_8B_WORD1,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x3 line.long 0x0 "MB6_64B_WORD5,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x24C++0x7 line.long 0x0 "WORD128,Message Buffer 28 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS29,Message Buffer 29 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x3 line.long 0x0 "MB11_32B_WORD4,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB19_16B_WORD0,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x250++0x3 line.long 0x0 "MB29_8B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x250++0x7 line.long 0x0 "MB6_64B_WORD6,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID29,Message Buffer 29 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x3 line.long 0x0 "MB11_32B_WORD5,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB19_16B_WORD1,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x254++0x3 line.long 0x0 "MB29_8B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x254++0x7 line.long 0x0 "MB6_64B_WORD7,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD6,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB19_16B_WORD2,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB29_8B_WORD0,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x258++0x3 line.long 0x0 "MB6_64B_WORD8,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x258++0x7 line.long 0x0 "WORD029,Message Buffer 29 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_32B_WORD7,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB19_16B_WORD3,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB29_8B_WORD1,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x3 line.long 0x0 "MB6_64B_WORD9,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x25C++0x7 line.long 0x0 "WORD129,Message Buffer 29 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS30,Message Buffer 30 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB12_32B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB20_16B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x3 line.long 0x0 "MB30_8B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x260++0x7 line.long 0x0 "MB6_64B_WORD10,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID30,Message Buffer 30 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB12_32B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB20_16B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x3 line.long 0x0 "MB30_8B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x264++0x7 line.long 0x0 "MB6_64B_WORD11,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD0,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB20_16B_WORD0,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB30_8B_WORD0,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x268++0x3 line.long 0x0 "MB6_64B_WORD12,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x268++0x7 line.long 0x0 "WORD030,Message Buffer 30 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD1,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB20_16B_WORD1,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB30_8B_WORD1,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x3 line.long 0x0 "MB6_64B_WORD13,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x26C++0x7 line.long 0x0 "WORD130,Message Buffer 30 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS31,Message Buffer 31 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x3 line.long 0x0 "MB12_32B_WORD2,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB20_16B_WORD2,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x270++0x3 line.long 0x0 "MB31_8B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x270++0x7 line.long 0x0 "MB6_64B_WORD14,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID31,Message Buffer 31 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x3 line.long 0x0 "MB12_32B_WORD3,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB20_16B_WORD3,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x274++0x3 line.long 0x0 "MB31_8B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x274++0x7 line.long 0x0 "MB6_64B_WORD15,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD4,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB21_16B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x3 line.long 0x0 "MB31_8B_WORD0,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x278++0x3 line.long 0x0 "MB7_64B_CS,Message Buffer 7 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x278++0x7 line.long 0x0 "WORD031,Message Buffer 31 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_32B_WORD5,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB21_16B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x3 line.long 0x0 "MB31_8B_WORD1,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x27C++0x3 line.long 0x0 "MB7_64B_ID,Message Buffer 7 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x27C++0x7 line.long 0x0 "WORD131,Message Buffer 31 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS32,Message Buffer 32 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x3 line.long 0x0 "MB12_32B_WORD6,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB21_16B_WORD0,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x280++0x3 line.long 0x0 "MB32_8B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x280++0x7 line.long 0x0 "MB7_64B_WORD0,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID32,Message Buffer 32 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x3 line.long 0x0 "MB12_32B_WORD7,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB21_16B_WORD1,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x284++0x3 line.long 0x0 "MB32_8B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x284++0x7 line.long 0x0 "MB7_64B_WORD1,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x288++0x3 line.long 0x0 "MB21_16B_WORD2,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB32_8B_WORD0,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x288++0x3 line.long 0x0 "MB7_64B_WORD2,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x288++0x7 line.long 0x0 "WORD032,Message Buffer 32 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x28C++0x3 line.long 0x0 "MB21_16B_WORD3,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB32_8B_WORD1,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x3 line.long 0x0 "MB7_64B_WORD3,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x28C++0x7 line.long 0x0 "WORD132,Message Buffer 32 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS33,Message Buffer 33 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB13_32B_WORD0,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x290++0x3 line.long 0x0 "MB22_16B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x3 line.long 0x0 "MB33_8B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x290++0x7 line.long 0x0 "MB7_64B_WORD4,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID33,Message Buffer 33 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB13_32B_WORD1,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x294++0x3 line.long 0x0 "MB22_16B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x3 line.long 0x0 "MB33_8B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x294++0x7 line.long 0x0 "MB7_64B_WORD5,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD2,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB22_16B_WORD0,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB33_8B_WORD0,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x298++0x3 line.long 0x0 "MB7_64B_WORD6,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x298++0x7 line.long 0x0 "WORD033,Message Buffer 33 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD3,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB22_16B_WORD1,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB33_8B_WORD1,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x3 line.long 0x0 "MB7_64B_WORD7,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x29C++0x7 line.long 0x0 "WORD133,Message Buffer 33 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS34,Message Buffer 34 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x3 line.long 0x0 "MB13_32B_WORD4,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB22_16B_WORD2,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2A0++0x3 line.long 0x0 "MB34_8B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A0++0x7 line.long 0x0 "MB7_64B_WORD8,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID34,Message Buffer 34 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x3 line.long 0x0 "MB13_32B_WORD5,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB22_16B_WORD3,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2A4++0x3 line.long 0x0 "MB34_8B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2A4++0x7 line.long 0x0 "MB7_64B_WORD9,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD6,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB23_16B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2A8++0x3 line.long 0x0 "MB34_8B_WORD0,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x3 line.long 0x0 "MB7_64B_WORD10,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x2A8++0x7 line.long 0x0 "WORD034,Message Buffer 34 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_32B_WORD7,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB23_16B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2AC++0x3 line.long 0x0 "MB34_8B_WORD1,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x3 line.long 0x0 "MB7_64B_WORD11,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x2AC++0x7 line.long 0x0 "WORD134,Message Buffer 34 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS35,Message Buffer 35 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB14_32B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x3 line.long 0x0 "MB23_16B_WORD0,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B0++0x3 line.long 0x0 "MB35_8B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2B0++0x7 line.long 0x0 "MB7_64B_WORD12,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID35,Message Buffer 35 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB14_32B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x3 line.long 0x0 "MB23_16B_WORD1,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2B4++0x3 line.long 0x0 "MB35_8B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2B4++0x7 line.long 0x0 "MB7_64B_WORD13,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD0,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB23_16B_WORD2,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB35_8B_WORD0,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x3 line.long 0x0 "MB7_64B_WORD14,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x2B8++0x7 line.long 0x0 "WORD035,Message Buffer 35 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD1,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB23_16B_WORD3,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB35_8B_WORD1,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x3 line.long 0x0 "MB7_64B_WORD15,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x2BC++0x7 line.long 0x0 "WORD135,Message Buffer 35 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS36,Message Buffer 36 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB14_32B_WORD2,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2C0++0x3 line.long 0x0 "MB24_16B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x3 line.long 0x0 "MB36_8B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2C0++0x7 line.long 0x0 "MB8_64B_CS,Message Buffer 8 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID36,Message Buffer 36 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB14_32B_WORD3,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2C4++0x3 line.long 0x0 "MB24_16B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x3 line.long 0x0 "MB36_8B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2C4++0x7 line.long 0x0 "MB8_64B_ID,Message Buffer 8 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_32B_WORD4,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB24_16B_WORD0,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB36_8B_WORD0,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x3 line.long 0x0 "MB8_64B_WORD0,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2C8++0x7 line.long 0x0 "WORD036,Message Buffer 36 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_32B_WORD5,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB24_16B_WORD1,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB36_8B_WORD1,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x3 line.long 0x0 "MB8_64B_WORD1,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2CC++0x7 line.long 0x0 "WORD136,Message Buffer 36 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS37,Message Buffer 37 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x3 line.long 0x0 "MB14_32B_WORD6,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB24_16B_WORD2,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2D0++0x3 line.long 0x0 "MB37_8B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D0++0x7 line.long 0x0 "MB8_64B_WORD2,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID37,Message Buffer 37 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x3 line.long 0x0 "MB14_32B_WORD7,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB24_16B_WORD3,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2D4++0x3 line.long 0x0 "MB37_8B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2D4++0x7 line.long 0x0 "MB8_64B_WORD3,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB25_16B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2D8++0x3 line.long 0x0 "MB37_8B_WORD0,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x3 line.long 0x0 "MB8_64B_WORD4,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2D8++0x7 line.long 0x0 "WORD037,Message Buffer 37 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB25_16B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2DC++0x3 line.long 0x0 "MB37_8B_WORD1,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x3 line.long 0x0 "MB8_64B_WORD5,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2DC++0x7 line.long 0x0 "WORD137,Message Buffer 37 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS38,Message Buffer 38 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x3 line.long 0x0 "MB15_32B_WORD0,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB25_16B_WORD0,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E0++0x3 line.long 0x0 "MB38_8B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2E0++0x7 line.long 0x0 "MB8_64B_WORD6,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID38,Message Buffer 38 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x3 line.long 0x0 "MB15_32B_WORD1,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB25_16B_WORD1,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2E4++0x3 line.long 0x0 "MB38_8B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2E4++0x7 line.long 0x0 "MB8_64B_WORD7,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD2,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB25_16B_WORD2,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB38_8B_WORD0,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x3 line.long 0x0 "MB8_64B_WORD8,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x2E8++0x7 line.long 0x0 "WORD038,Message Buffer 38 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD3,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB25_16B_WORD3,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB38_8B_WORD1,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x3 line.long 0x0 "MB8_64B_WORD9,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x2EC++0x7 line.long 0x0 "WORD138,Message Buffer 38 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS39,Message Buffer 39 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB15_32B_WORD4,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x2F0++0x3 line.long 0x0 "MB26_16B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x3 line.long 0x0 "MB39_8B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x2F0++0x7 line.long 0x0 "MB8_64B_WORD10,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID39,Message Buffer 39 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB15_32B_WORD5,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x2F4++0x3 line.long 0x0 "MB26_16B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x3 line.long 0x0 "MB39_8B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x2F4++0x7 line.long 0x0 "MB8_64B_WORD11,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD6,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB26_16B_WORD0,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB39_8B_WORD0,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x3 line.long 0x0 "MB8_64B_WORD12,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x2F8++0x7 line.long 0x0 "WORD039,Message Buffer 39 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_32B_WORD7,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB26_16B_WORD1,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB39_8B_WORD1,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x3 line.long 0x0 "MB8_64B_WORD13,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x2FC++0x7 line.long 0x0 "WORD139,Message Buffer 39 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS40,Message Buffer 40 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB16_32B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x3 line.long 0x0 "MB26_16B_WORD2,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x300++0x3 line.long 0x0 "MB40_8B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x300++0x7 line.long 0x0 "MB8_64B_WORD14,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID40,Message Buffer 40 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB16_32B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x3 line.long 0x0 "MB26_16B_WORD3,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x304++0x3 line.long 0x0 "MB40_8B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x304++0x7 line.long 0x0 "MB8_64B_WORD15,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD0,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB27_16B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x3 line.long 0x0 "MB40_8B_WORD0,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x308++0x3 line.long 0x0 "MB9_64B_CS,Message Buffer 9 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x308++0x7 line.long 0x0 "WORD040,Message Buffer 40 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD1,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB27_16B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x3 line.long 0x0 "MB40_8B_WORD1,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x30C++0x3 line.long 0x0 "MB9_64B_ID,Message Buffer 9 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x30C++0x7 line.long 0x0 "WORD140,Message Buffer 40 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS41,Message Buffer 41 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x3 line.long 0x0 "MB16_32B_WORD2,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB27_16B_WORD0,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x310++0x3 line.long 0x0 "MB41_8B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x310++0x7 line.long 0x0 "MB9_64B_WORD0,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID41,Message Buffer 41 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x3 line.long 0x0 "MB16_32B_WORD3,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB27_16B_WORD1,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x314++0x3 line.long 0x0 "MB41_8B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x314++0x7 line.long 0x0 "MB9_64B_WORD1,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD4,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB27_16B_WORD2,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB41_8B_WORD0,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x318++0x3 line.long 0x0 "MB9_64B_WORD2,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x318++0x7 line.long 0x0 "WORD041,Message Buffer 41 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_32B_WORD5,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB27_16B_WORD3,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB41_8B_WORD1,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x3 line.long 0x0 "MB9_64B_WORD3,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x31C++0x7 line.long 0x0 "WORD141,Message Buffer 41 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS42,Message Buffer 42 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB16_32B_WORD6,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x320++0x3 line.long 0x0 "MB28_16B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x3 line.long 0x0 "MB42_8B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x320++0x7 line.long 0x0 "MB9_64B_WORD4,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID42,Message Buffer 42 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB16_32B_WORD7,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x324++0x3 line.long 0x0 "MB28_16B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x3 line.long 0x0 "MB42_8B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x324++0x7 line.long 0x0 "MB9_64B_WORD5,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x328++0x3 line.long 0x0 "MB28_16B_WORD0,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB42_8B_WORD0,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x328++0x3 line.long 0x0 "MB9_64B_WORD6,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x328++0x7 line.long 0x0 "WORD042,Message Buffer 42 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x32C++0x3 line.long 0x0 "MB28_16B_WORD1,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB42_8B_WORD1,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x3 line.long 0x0 "MB9_64B_WORD7,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x32C++0x7 line.long 0x0 "WORD142,Message Buffer 42 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS43,Message Buffer 43 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x3 line.long 0x0 "MB17_32B_WORD0,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB28_16B_WORD2,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x330++0x3 line.long 0x0 "MB43_8B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x330++0x7 line.long 0x0 "MB9_64B_WORD8,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID43,Message Buffer 43 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x3 line.long 0x0 "MB17_32B_WORD1,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB28_16B_WORD3,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x334++0x3 line.long 0x0 "MB43_8B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x334++0x7 line.long 0x0 "MB9_64B_WORD9,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD2,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB29_16B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x338++0x3 line.long 0x0 "MB43_8B_WORD0,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x338++0x3 line.long 0x0 "MB9_64B_WORD10,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x338++0x7 line.long 0x0 "WORD043,Message Buffer 43 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD3,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB29_16B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x33C++0x3 line.long 0x0 "MB43_8B_WORD1,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x3 line.long 0x0 "MB9_64B_WORD11,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x33C++0x7 line.long 0x0 "WORD143,Message Buffer 43 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS44,Message Buffer 44 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x3 line.long 0x0 "MB17_32B_WORD4,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB29_16B_WORD0,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x340++0x3 line.long 0x0 "MB44_8B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x340++0x7 line.long 0x0 "MB9_64B_WORD12,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." line.long 0x4 "ID44,Message Buffer 44 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x3 line.long 0x0 "MB17_32B_WORD5,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB29_16B_WORD1,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x344++0x3 line.long 0x0 "MB44_8B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x344++0x7 line.long 0x0 "MB9_64B_WORD13,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD6,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB29_16B_WORD2,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB44_8B_WORD0,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x348++0x3 line.long 0x0 "MB9_64B_WORD14,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x348++0x7 line.long 0x0 "WORD044,Message Buffer 44 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_32B_WORD7,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB29_16B_WORD3,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB44_8B_WORD1,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x3 line.long 0x0 "MB9_64B_WORD15,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x34C++0x7 line.long 0x0 "WORD144,Message Buffer 44 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS45,Message Buffer 45 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB10_64B_CS,Message Buffer 10 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB18_32B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x3 line.long 0x0 "MB30_16B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x350++0x7 line.long 0x0 "MB45_8B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID45,Message Buffer 45 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB10_64B_ID,Message Buffer 10 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB18_32B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x3 line.long 0x0 "MB30_16B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x354++0x7 line.long 0x0 "MB45_8B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD0,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB18_32B_WORD0,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB30_16B_WORD0,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x3 line.long 0x0 "MB45_8B_WORD0,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x358++0x7 line.long 0x0 "WORD045,Message Buffer 45 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD1,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB18_32B_WORD1,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB30_16B_WORD1,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x3 line.long 0x0 "MB45_8B_WORD1,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x35C++0x7 line.long 0x0 "WORD145,Message Buffer 45 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS46,Message Buffer 46 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x360++0x3 line.long 0x0 "MB10_64B_WORD2,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB18_32B_WORD2,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x3 line.long 0x0 "MB30_16B_WORD2,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x360++0x7 line.long 0x0 "MB46_8B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID46,Message Buffer 46 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x364++0x3 line.long 0x0 "MB10_64B_WORD3,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB18_32B_WORD3,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x3 line.long 0x0 "MB30_16B_WORD3,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x364++0x7 line.long 0x0 "MB46_8B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD4,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB18_32B_WORD4,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x368++0x3 line.long 0x0 "MB31_16B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x368++0x3 line.long 0x0 "MB46_8B_WORD0,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x368++0x7 line.long 0x0 "WORD046,Message Buffer 46 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD5,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB18_32B_WORD5,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x3 line.long 0x0 "MB31_16B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x36C++0x3 line.long 0x0 "MB46_8B_WORD1,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x36C++0x7 line.long 0x0 "WORD146,Message Buffer 46 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS47,Message Buffer 47 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x370++0x3 line.long 0x0 "MB10_64B_WORD6,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB18_32B_WORD6,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x370++0x3 line.long 0x0 "MB31_16B_WORD0,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x370++0x7 line.long 0x0 "MB47_8B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID47,Message Buffer 47 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x374++0x3 line.long 0x0 "MB10_64B_WORD7,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB18_32B_WORD7,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x374++0x3 line.long 0x0 "MB31_16B_WORD1,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x374++0x7 line.long 0x0 "MB47_8B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD8,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB19_32B_CS,Message Buffer 19 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x378++0x3 line.long 0x0 "MB31_16B_WORD2,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x378++0x3 line.long 0x0 "MB47_8B_WORD0,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x378++0x7 line.long 0x0 "WORD047,Message Buffer 47 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD9,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB19_32B_ID,Message Buffer 19 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x37C++0x3 line.long 0x0 "MB31_16B_WORD3,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x3 line.long 0x0 "MB47_8B_WORD1,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x37C++0x7 line.long 0x0 "WORD147,Message Buffer 47 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS48,Message Buffer 48 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x3 line.long 0x0 "MB10_64B_WORD10,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB19_32B_WORD0,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x380++0x3 line.long 0x0 "MB32_16B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x380++0x7 line.long 0x0 "MB48_8B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID48,Message Buffer 48 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x3 line.long 0x0 "MB10_64B_WORD11,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB19_32B_WORD1,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x384++0x3 line.long 0x0 "MB32_16B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x384++0x7 line.long 0x0 "MB48_8B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB10_64B_WORD12,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB19_32B_WORD2,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB32_16B_WORD0,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x3 line.long 0x0 "MB48_8B_WORD0,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x388++0x7 line.long 0x0 "WORD048,Message Buffer 48 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB10_64B_WORD13,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB19_32B_WORD3,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB32_16B_WORD1,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x3 line.long 0x0 "MB48_8B_WORD1,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x38C++0x7 line.long 0x0 "WORD148,Message Buffer 48 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS49,Message Buffer 49 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x390++0x3 line.long 0x0 "MB10_64B_WORD14,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB19_32B_WORD4,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x390++0x3 line.long 0x0 "MB32_16B_WORD2,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x390++0x7 line.long 0x0 "MB49_8B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID49,Message Buffer 49 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x394++0x3 line.long 0x0 "MB10_64B_WORD15,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB19_32B_WORD5,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x394++0x3 line.long 0x0 "MB32_16B_WORD3,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x394++0x7 line.long 0x0 "MB49_8B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_CS,Message Buffer 11 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB19_32B_WORD6,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x398++0x3 line.long 0x0 "MB33_16B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x398++0x3 line.long 0x0 "MB49_8B_WORD0,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x398++0x7 line.long 0x0 "WORD049,Message Buffer 49 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_ID,Message Buffer 11 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB19_32B_WORD7,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x3 line.long 0x0 "MB33_16B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x39C++0x3 line.long 0x0 "MB49_8B_WORD1,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x39C++0x7 line.long 0x0 "WORD149,Message Buffer 49 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS50,Message Buffer 50 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB11_64B_WORD0,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x3 line.long 0x0 "MB20_32B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3A0++0x3 line.long 0x0 "MB33_16B_WORD0,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A0++0x7 line.long 0x0 "MB50_8B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID50,Message Buffer 50 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB11_64B_WORD1,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x3 line.long 0x0 "MB20_32B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3A4++0x3 line.long 0x0 "MB33_16B_WORD1,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3A4++0x7 line.long 0x0 "MB50_8B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD2,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB20_32B_WORD0,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB33_16B_WORD2,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x3 line.long 0x0 "MB50_8B_WORD0,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3A8++0x7 line.long 0x0 "WORD050,Message Buffer 50 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD3,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB20_32B_WORD1,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB33_16B_WORD3,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x3 line.long 0x0 "MB50_8B_WORD1,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3AC++0x7 line.long 0x0 "WORD150,Message Buffer 50 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS51,Message Buffer 51 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x3 line.long 0x0 "MB11_64B_WORD4,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB20_32B_WORD2,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3B0++0x3 line.long 0x0 "MB34_16B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3B0++0x7 line.long 0x0 "MB51_8B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID51,Message Buffer 51 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x3 line.long 0x0 "MB11_64B_WORD5,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB20_32B_WORD3,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3B4++0x3 line.long 0x0 "MB34_16B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3B4++0x7 line.long 0x0 "MB51_8B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD6,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB20_32B_WORD4,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB34_16B_WORD0,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x3 line.long 0x0 "MB51_8B_WORD0,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3B8++0x7 line.long 0x0 "WORD051,Message Buffer 51 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD7,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB20_32B_WORD5,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB34_16B_WORD1,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x3 line.long 0x0 "MB51_8B_WORD1,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3BC++0x7 line.long 0x0 "WORD151,Message Buffer 51 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS52,Message Buffer 52 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C0++0x3 line.long 0x0 "MB11_64B_WORD8,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB20_32B_WORD6,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x3 line.long 0x0 "MB34_16B_WORD2,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3C0++0x7 line.long 0x0 "MB52_8B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID52,Message Buffer 52 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3C4++0x3 line.long 0x0 "MB11_64B_WORD9,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB20_32B_WORD7,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x3 line.long 0x0 "MB34_16B_WORD3,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3C4++0x7 line.long 0x0 "MB52_8B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD10,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x3 line.long 0x0 "MB21_32B_CS,Message Buffer 21 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB35_16B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3C8++0x3 line.long 0x0 "MB52_8B_WORD0,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3C8++0x7 line.long 0x0 "WORD052,Message Buffer 52 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD11,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x3 line.long 0x0 "MB21_32B_ID,Message Buffer 21 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB35_16B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3CC++0x3 line.long 0x0 "MB52_8B_WORD1,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3CC++0x7 line.long 0x0 "WORD152,Message Buffer 52 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS53,Message Buffer 53 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3D0++0x3 line.long 0x0 "MB11_64B_WORD12,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB21_32B_WORD0,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x3 line.long 0x0 "MB35_16B_WORD0,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D0++0x7 line.long 0x0 "MB53_8B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID53,Message Buffer 53 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3D4++0x3 line.long 0x0 "MB11_64B_WORD13,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB21_32B_WORD1,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x3 line.long 0x0 "MB35_16B_WORD1,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3D4++0x7 line.long 0x0 "MB53_8B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB11_64B_WORD14,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB21_32B_WORD2,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB35_16B_WORD2,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x3 line.long 0x0 "MB53_8B_WORD0,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3D8++0x7 line.long 0x0 "WORD053,Message Buffer 53 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB11_64B_WORD15,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB21_32B_WORD3,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB35_16B_WORD3,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x3 line.long 0x0 "MB53_8B_WORD1,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3DC++0x7 line.long 0x0 "WORD153,Message Buffer 53 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS54,Message Buffer 54 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB12_64B_CS,Message Buffer 12 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x3 line.long 0x0 "MB21_32B_WORD4,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3E0++0x3 line.long 0x0 "MB36_16B_CS,Message Buffer 36 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3E0++0x7 line.long 0x0 "MB54_8B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID54,Message Buffer 54 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB12_64B_ID,Message Buffer 12 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x3 line.long 0x0 "MB21_32B_WORD5,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3E4++0x3 line.long 0x0 "MB36_16B_ID,Message Buffer 36 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3E4++0x7 line.long 0x0 "MB54_8B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD0,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB21_32B_WORD6,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB36_16B_WORD0,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x3 line.long 0x0 "MB54_8B_WORD0,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3E8++0x7 line.long 0x0 "WORD054,Message Buffer 54 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD1,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB21_32B_WORD7,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB36_16B_WORD1,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x3 line.long 0x0 "MB54_8B_WORD1,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3EC++0x7 line.long 0x0 "WORD154,Message Buffer 54 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS55,Message Buffer 55 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB12_64B_WORD2,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x3 line.long 0x0 "MB22_32B_CS,Message Buffer 22 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F0++0x3 line.long 0x0 "MB36_16B_WORD2,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x3F0++0x7 line.long 0x0 "MB55_8B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID55,Message Buffer 55 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB12_64B_WORD3,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x3 line.long 0x0 "MB22_32B_ID,Message Buffer 22 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3F4++0x3 line.long 0x0 "MB36_16B_WORD3,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x3F4++0x7 line.long 0x0 "MB55_8B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD4,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB22_32B_WORD0,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x3 line.long 0x0 "MB37_16B_CS,Message Buffer 37 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x3F8++0x3 line.long 0x0 "MB55_8B_WORD0,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x3F8++0x7 line.long 0x0 "WORD055,Message Buffer 55 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD5,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB22_32B_WORD1,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x3 line.long 0x0 "MB37_16B_ID,Message Buffer 37 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x3FC++0x3 line.long 0x0 "MB55_8B_WORD1,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x3FC++0x7 line.long 0x0 "WORD155,Message Buffer 55 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS56,Message Buffer 56 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x400++0x3 line.long 0x0 "MB12_64B_WORD6,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB22_32B_WORD2,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x400++0x3 line.long 0x0 "MB37_16B_WORD0,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x400++0x7 line.long 0x0 "MB56_8B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID56,Message Buffer 56 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x404++0x3 line.long 0x0 "MB12_64B_WORD7,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB22_32B_WORD3,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x404++0x3 line.long 0x0 "MB37_16B_WORD1,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x404++0x7 line.long 0x0 "MB56_8B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD8,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB22_32B_WORD4,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB37_16B_WORD2,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x408++0x3 line.long 0x0 "MB56_8B_WORD0,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x408++0x7 line.long 0x0 "WORD056,Message Buffer 56 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD9,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB22_32B_WORD5,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB37_16B_WORD3,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x3 line.long 0x0 "MB56_8B_WORD1,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x40C++0x7 line.long 0x0 "WORD156,Message Buffer 56 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS57,Message Buffer 57 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x3 line.long 0x0 "MB12_64B_WORD10,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB22_32B_WORD6,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x410++0x3 line.long 0x0 "MB38_16B_CS,Message Buffer 38 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x410++0x7 line.long 0x0 "MB57_8B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID57,Message Buffer 57 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x3 line.long 0x0 "MB12_64B_WORD11,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB22_32B_WORD7,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x414++0x3 line.long 0x0 "MB38_16B_ID,Message Buffer 38 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x414++0x7 line.long 0x0 "MB57_8B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB12_64B_WORD12,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB23_32B_CS,Message Buffer 23 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x418++0x3 line.long 0x0 "MB38_16B_WORD0,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x3 line.long 0x0 "MB57_8B_WORD0,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x418++0x7 line.long 0x0 "WORD057,Message Buffer 57 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB12_64B_WORD13,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB23_32B_ID,Message Buffer 23 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x41C++0x3 line.long 0x0 "MB38_16B_WORD1,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x3 line.long 0x0 "MB57_8B_WORD1,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x41C++0x7 line.long 0x0 "WORD157,Message Buffer 57 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS58,Message Buffer 58 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x420++0x3 line.long 0x0 "MB12_64B_WORD14,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB23_32B_WORD0,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x420++0x3 line.long 0x0 "MB38_16B_WORD2,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x420++0x7 line.long 0x0 "MB58_8B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID58,Message Buffer 58 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x424++0x3 line.long 0x0 "MB12_64B_WORD15,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB23_32B_WORD1,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x424++0x3 line.long 0x0 "MB38_16B_WORD3,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x424++0x7 line.long 0x0 "MB58_8B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_CS,Message Buffer 13 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB23_32B_WORD2,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x428++0x3 line.long 0x0 "MB39_16B_CS,Message Buffer 39 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x428++0x3 line.long 0x0 "MB58_8B_WORD0,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x428++0x7 line.long 0x0 "WORD058,Message Buffer 58 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_ID,Message Buffer 13 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB23_32B_WORD3,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x3 line.long 0x0 "MB39_16B_ID,Message Buffer 39 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x42C++0x3 line.long 0x0 "MB58_8B_WORD1,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x42C++0x7 line.long 0x0 "WORD158,Message Buffer 58 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS59,Message Buffer 59 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x430++0x3 line.long 0x0 "MB13_64B_WORD0,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB23_32B_WORD4,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x430++0x3 line.long 0x0 "MB39_16B_WORD0,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x430++0x7 line.long 0x0 "MB59_8B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID59,Message Buffer 59 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x434++0x3 line.long 0x0 "MB13_64B_WORD1,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB23_32B_WORD5,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x434++0x3 line.long 0x0 "MB39_16B_WORD1,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x434++0x7 line.long 0x0 "MB59_8B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD2,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB23_32B_WORD6,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB39_16B_WORD2,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x438++0x3 line.long 0x0 "MB59_8B_WORD0,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x438++0x7 line.long 0x0 "WORD059,Message Buffer 59 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD3,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB23_32B_WORD7,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB39_16B_WORD3,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x3 line.long 0x0 "MB59_8B_WORD1,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x43C++0x7 line.long 0x0 "WORD159,Message Buffer 59 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS60,Message Buffer 60 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB13_64B_WORD4,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x440++0x3 line.long 0x0 "MB24_32B_CS,Message Buffer 24 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x3 line.long 0x0 "MB40_16B_CS,Message Buffer 40 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x440++0x7 line.long 0x0 "MB60_8B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID60,Message Buffer 60 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB13_64B_WORD5,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x444++0x3 line.long 0x0 "MB24_32B_ID,Message Buffer 24 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x3 line.long 0x0 "MB40_16B_ID,Message Buffer 40 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x444++0x7 line.long 0x0 "MB60_8B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD6,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB24_32B_WORD0,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB40_16B_WORD0,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x3 line.long 0x0 "MB60_8B_WORD0,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x448++0x7 line.long 0x0 "WORD060,Message Buffer 60 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD7,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB24_32B_WORD1,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB40_16B_WORD1,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x3 line.long 0x0 "MB60_8B_WORD1,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x44C++0x7 line.long 0x0 "WORD160,Message Buffer 60 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS61,Message Buffer 61 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x450++0x3 line.long 0x0 "MB13_64B_WORD8,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB24_32B_WORD2,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x3 line.long 0x0 "MB40_16B_WORD2,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x450++0x7 line.long 0x0 "MB61_8B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID61,Message Buffer 61 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x454++0x3 line.long 0x0 "MB13_64B_WORD9,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB24_32B_WORD3,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x3 line.long 0x0 "MB40_16B_WORD3,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x454++0x7 line.long 0x0 "MB61_8B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD10,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB24_32B_WORD4,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x458++0x3 line.long 0x0 "MB41_16B_CS,Message Buffer 41 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x458++0x3 line.long 0x0 "MB61_8B_WORD0,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x458++0x7 line.long 0x0 "WORD061,Message Buffer 61 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD11,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB24_32B_WORD5,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x3 line.long 0x0 "MB41_16B_ID,Message Buffer 41 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x45C++0x3 line.long 0x0 "MB61_8B_WORD1,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x45C++0x7 line.long 0x0 "WORD161,Message Buffer 61 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS62,Message Buffer 62 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x460++0x3 line.long 0x0 "MB13_64B_WORD12,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB24_32B_WORD6,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x460++0x3 line.long 0x0 "MB41_16B_WORD0,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x460++0x7 line.long 0x0 "MB62_8B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID62,Message Buffer 62 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x464++0x3 line.long 0x0 "MB13_64B_WORD13,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB24_32B_WORD7,Message Buffer 24 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x464++0x3 line.long 0x0 "MB41_16B_WORD1,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x464++0x7 line.long 0x0 "MB62_8B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB13_64B_WORD14,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB25_32B_CS,Message Buffer 25 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x468++0x3 line.long 0x0 "MB41_16B_WORD2,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x468++0x3 line.long 0x0 "MB62_8B_WORD0,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x468++0x7 line.long 0x0 "WORD062,Message Buffer 62 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB13_64B_WORD15,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB25_32B_ID,Message Buffer 25 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x46C++0x3 line.long 0x0 "MB41_16B_WORD3,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x3 line.long 0x0 "MB62_8B_WORD1,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x46C++0x7 line.long 0x0 "WORD162,Message Buffer 62 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS63,Message Buffer 63 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB14_64B_CS,Message Buffer 14 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x3 line.long 0x0 "MB25_32B_WORD0,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x470++0x3 line.long 0x0 "MB42_16B_CS,Message Buffer 42 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x470++0x7 line.long 0x0 "MB63_8B_CS,Message Buffer 63 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID63,Message Buffer 63 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB14_64B_ID,Message Buffer 14 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x3 line.long 0x0 "MB25_32B_WORD1,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x474++0x3 line.long 0x0 "MB42_16B_ID,Message Buffer 42 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x474++0x7 line.long 0x0 "MB63_8B_ID,Message Buffer 63 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD0,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB25_32B_WORD2,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB42_16B_WORD0,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x3 line.long 0x0 "MB63_8B_WORD0,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x478++0x7 line.long 0x0 "WORD063,Message Buffer 63 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD1,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB25_32B_WORD3,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB42_16B_WORD1,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x3 line.long 0x0 "MB63_8B_WORD1,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x47C++0x7 line.long 0x0 "WORD163,Message Buffer 63 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS64,Message Buffer 64 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x480++0x3 line.long 0x0 "MB14_64B_WORD2,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB25_32B_WORD4,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x480++0x3 line.long 0x0 "MB42_16B_WORD2,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x480++0x7 line.long 0x0 "MB64_8B_CS,Message Buffer 64 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID64,Message Buffer 64 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x484++0x3 line.long 0x0 "MB14_64B_WORD3,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB25_32B_WORD5,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x484++0x3 line.long 0x0 "MB42_16B_WORD3,Message Buffer 42 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x484++0x7 line.long 0x0 "MB64_8B_ID,Message Buffer 64 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD4,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB25_32B_WORD6,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x488++0x3 line.long 0x0 "MB43_16B_CS,Message Buffer 43 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x488++0x3 line.long 0x0 "MB64_8B_WORD0,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x488++0x7 line.long 0x0 "WORD064,Message Buffer 64 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD5,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB25_32B_WORD7,Message Buffer 25 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x3 line.long 0x0 "MB43_16B_ID,Message Buffer 43 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x48C++0x3 line.long 0x0 "MB64_8B_WORD1,Message Buffer 64 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x48C++0x7 line.long 0x0 "WORD164,Message Buffer 64 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS65,Message Buffer 65 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB14_64B_WORD6,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x490++0x3 line.long 0x0 "MB26_32B_CS,Message Buffer 26 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x490++0x3 line.long 0x0 "MB43_16B_WORD0,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x490++0x7 line.long 0x0 "MB65_8B_CS,Message Buffer 65 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID65,Message Buffer 65 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB14_64B_WORD7,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x494++0x3 line.long 0x0 "MB26_32B_ID,Message Buffer 26 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x494++0x3 line.long 0x0 "MB43_16B_WORD1,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x494++0x7 line.long 0x0 "MB65_8B_ID,Message Buffer 65 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD8,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB26_32B_WORD0,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB43_16B_WORD2,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x498++0x3 line.long 0x0 "MB65_8B_WORD0,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x498++0x7 line.long 0x0 "WORD065,Message Buffer 65 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD9,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB26_32B_WORD1,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB43_16B_WORD3,Message Buffer 43 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x3 line.long 0x0 "MB65_8B_WORD1,Message Buffer 65 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x49C++0x7 line.long 0x0 "WORD165,Message Buffer 65 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS66,Message Buffer 66 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x3 line.long 0x0 "MB14_64B_WORD10,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB26_32B_WORD2,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4A0++0x3 line.long 0x0 "MB44_16B_CS,Message Buffer 44 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4A0++0x7 line.long 0x0 "MB66_8B_CS,Message Buffer 66 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID66,Message Buffer 66 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x3 line.long 0x0 "MB14_64B_WORD11,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB26_32B_WORD3,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4A4++0x3 line.long 0x0 "MB44_16B_ID,Message Buffer 44 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4A4++0x7 line.long 0x0 "MB66_8B_ID,Message Buffer 66 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB14_64B_WORD12,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB26_32B_WORD4,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB44_16B_WORD0,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x3 line.long 0x0 "MB66_8B_WORD0,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4A8++0x7 line.long 0x0 "WORD066,Message Buffer 66 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB14_64B_WORD13,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB26_32B_WORD5,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB44_16B_WORD1,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x3 line.long 0x0 "MB66_8B_WORD1,Message Buffer 66 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4AC++0x7 line.long 0x0 "WORD166,Message Buffer 66 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS67,Message Buffer 67 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B0++0x3 line.long 0x0 "MB14_64B_WORD14,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB26_32B_WORD6,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x3 line.long 0x0 "MB44_16B_WORD2,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4B0++0x7 line.long 0x0 "MB67_8B_CS,Message Buffer 67 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID67,Message Buffer 67 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4B4++0x3 line.long 0x0 "MB14_64B_WORD15,Message Buffer 14 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB26_32B_WORD7,Message Buffer 26 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x3 line.long 0x0 "MB44_16B_WORD3,Message Buffer 44 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4B4++0x7 line.long 0x0 "MB67_8B_ID,Message Buffer 67 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_CS,Message Buffer 15 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB27_32B_CS,Message Buffer 27 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB45_16B_CS,Message Buffer 45 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4B8++0x3 line.long 0x0 "MB67_8B_WORD0,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4B8++0x7 line.long 0x0 "WORD067,Message Buffer 67 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_ID,Message Buffer 15 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB27_32B_ID,Message Buffer 27 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB45_16B_ID,Message Buffer 45 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4BC++0x3 line.long 0x0 "MB67_8B_WORD1,Message Buffer 67 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4BC++0x7 line.long 0x0 "WORD167,Message Buffer 67 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS68,Message Buffer 68 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4C0++0x3 line.long 0x0 "MB15_64B_WORD0,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB27_32B_WORD0,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x3 line.long 0x0 "MB45_16B_WORD0,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C0++0x7 line.long 0x0 "MB68_8B_CS,Message Buffer 68 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID68,Message Buffer 68 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4C4++0x3 line.long 0x0 "MB15_64B_WORD1,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB27_32B_WORD1,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x3 line.long 0x0 "MB45_16B_WORD1,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4C4++0x7 line.long 0x0 "MB68_8B_ID,Message Buffer 68 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD2,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB27_32B_WORD2,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB45_16B_WORD2,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x3 line.long 0x0 "MB68_8B_WORD0,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4C8++0x7 line.long 0x0 "WORD068,Message Buffer 68 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD3,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB27_32B_WORD3,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB45_16B_WORD3,Message Buffer 45 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x3 line.long 0x0 "MB68_8B_WORD1,Message Buffer 68 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4CC++0x7 line.long 0x0 "WORD168,Message Buffer 68 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS69,Message Buffer 69 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x3 line.long 0x0 "MB15_64B_WORD4,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB27_32B_WORD4,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4D0++0x3 line.long 0x0 "MB46_16B_CS,Message Buffer 46 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4D0++0x7 line.long 0x0 "MB69_8B_CS,Message Buffer 69 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID69,Message Buffer 69 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x3 line.long 0x0 "MB15_64B_WORD5,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB27_32B_WORD5,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4D4++0x3 line.long 0x0 "MB46_16B_ID,Message Buffer 46 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4D4++0x7 line.long 0x0 "MB69_8B_ID,Message Buffer 69 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD6,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB27_32B_WORD6,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB46_16B_WORD0,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x3 line.long 0x0 "MB69_8B_WORD0,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4D8++0x7 line.long 0x0 "WORD069,Message Buffer 69 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD7,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB27_32B_WORD7,Message Buffer 27 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB46_16B_WORD1,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x3 line.long 0x0 "MB69_8B_WORD1,Message Buffer 69 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4DC++0x7 line.long 0x0 "WORD169,Message Buffer 69 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS70,Message Buffer 70 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB15_64B_WORD8,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x3 line.long 0x0 "MB28_32B_CS,Message Buffer 28 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E0++0x3 line.long 0x0 "MB46_16B_WORD2,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4E0++0x7 line.long 0x0 "MB70_8B_CS,Message Buffer 70 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID70,Message Buffer 70 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB15_64B_WORD9,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x3 line.long 0x0 "MB28_32B_ID,Message Buffer 28 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4E4++0x3 line.long 0x0 "MB46_16B_WORD3,Message Buffer 46 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4E4++0x7 line.long 0x0 "MB70_8B_ID,Message Buffer 70 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD10,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB28_32B_WORD0,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x3 line.long 0x0 "MB47_16B_CS,Message Buffer 47 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4E8++0x3 line.long 0x0 "MB70_8B_WORD0,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4E8++0x7 line.long 0x0 "WORD070,Message Buffer 70 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD11,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB28_32B_WORD1,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x3 line.long 0x0 "MB47_16B_ID,Message Buffer 47 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4EC++0x3 line.long 0x0 "MB70_8B_WORD1,Message Buffer 70 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4EC++0x7 line.long 0x0 "WORD170,Message Buffer 70 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS71,Message Buffer 71 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x4F0++0x3 line.long 0x0 "MB15_64B_WORD12,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB28_32B_WORD2,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x3 line.long 0x0 "MB47_16B_WORD0,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F0++0x7 line.long 0x0 "MB71_8B_CS,Message Buffer 71 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID71,Message Buffer 71 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x4F4++0x3 line.long 0x0 "MB15_64B_WORD13,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB28_32B_WORD3,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x3 line.long 0x0 "MB47_16B_WORD1,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4F4++0x7 line.long 0x0 "MB71_8B_ID,Message Buffer 71 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB15_64B_WORD14,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB28_32B_WORD4,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB47_16B_WORD2,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x3 line.long 0x0 "MB71_8B_WORD0,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x4F8++0x7 line.long 0x0 "WORD071,Message Buffer 71 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB15_64B_WORD15,Message Buffer 15 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB28_32B_WORD5,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB47_16B_WORD3,Message Buffer 47 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x3 line.long 0x0 "MB71_8B_WORD1,Message Buffer 71 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x4FC++0x7 line.long 0x0 "WORD171,Message Buffer 71 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS72,Message Buffer 72 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB16_64B_CS,Message Buffer 16 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x3 line.long 0x0 "MB28_32B_WORD6,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x500++0x3 line.long 0x0 "MB48_16B_CS,Message Buffer 48 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x500++0x7 line.long 0x0 "MB72_8B_CS,Message Buffer 72 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID72,Message Buffer 72 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB16_64B_ID,Message Buffer 16 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x3 line.long 0x0 "MB28_32B_WORD7,Message Buffer 28 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x504++0x3 line.long 0x0 "MB48_16B_ID,Message Buffer 48 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x504++0x7 line.long 0x0 "MB72_8B_ID,Message Buffer 72 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD0,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB29_32B_CS,Message Buffer 29 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x508++0x3 line.long 0x0 "MB48_16B_WORD0,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x3 line.long 0x0 "MB72_8B_WORD0,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x508++0x7 line.long 0x0 "WORD072,Message Buffer 72 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD1,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB29_32B_ID,Message Buffer 29 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x50C++0x3 line.long 0x0 "MB48_16B_WORD1,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x3 line.long 0x0 "MB72_8B_WORD1,Message Buffer 72 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x50C++0x7 line.long 0x0 "WORD172,Message Buffer 72 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS73,Message Buffer 73 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x510++0x3 line.long 0x0 "MB16_64B_WORD2,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB29_32B_WORD0,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x510++0x3 line.long 0x0 "MB48_16B_WORD2,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x510++0x7 line.long 0x0 "MB73_8B_CS,Message Buffer 73 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID73,Message Buffer 73 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x514++0x3 line.long 0x0 "MB16_64B_WORD3,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB29_32B_WORD1,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x514++0x3 line.long 0x0 "MB48_16B_WORD3,Message Buffer 48 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x514++0x7 line.long 0x0 "MB73_8B_ID,Message Buffer 73 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD4,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB29_32B_WORD2,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x518++0x3 line.long 0x0 "MB49_16B_CS,Message Buffer 49 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x518++0x3 line.long 0x0 "MB73_8B_WORD0,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x518++0x7 line.long 0x0 "WORD073,Message Buffer 73 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD5,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB29_32B_WORD3,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x3 line.long 0x0 "MB49_16B_ID,Message Buffer 49 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x51C++0x3 line.long 0x0 "MB73_8B_WORD1,Message Buffer 73 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x51C++0x7 line.long 0x0 "WORD173,Message Buffer 73 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS74,Message Buffer 74 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x520++0x3 line.long 0x0 "MB16_64B_WORD6,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB29_32B_WORD4,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x520++0x3 line.long 0x0 "MB49_16B_WORD0,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x520++0x7 line.long 0x0 "MB74_8B_CS,Message Buffer 74 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID74,Message Buffer 74 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x524++0x3 line.long 0x0 "MB16_64B_WORD7,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB29_32B_WORD5,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x524++0x3 line.long 0x0 "MB49_16B_WORD1,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x524++0x7 line.long 0x0 "MB74_8B_ID,Message Buffer 74 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD8,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB29_32B_WORD6,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB49_16B_WORD2,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x528++0x3 line.long 0x0 "MB74_8B_WORD0,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x528++0x7 line.long 0x0 "WORD074,Message Buffer 74 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD9,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB29_32B_WORD7,Message Buffer 29 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB49_16B_WORD3,Message Buffer 49 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x3 line.long 0x0 "MB74_8B_WORD1,Message Buffer 74 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x52C++0x7 line.long 0x0 "WORD174,Message Buffer 74 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS75,Message Buffer 75 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB16_64B_WORD10,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x530++0x3 line.long 0x0 "MB30_32B_CS,Message Buffer 30 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x3 line.long 0x0 "MB50_16B_CS,Message Buffer 50 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x530++0x7 line.long 0x0 "MB75_8B_CS,Message Buffer 75 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID75,Message Buffer 75 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB16_64B_WORD11,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x534++0x3 line.long 0x0 "MB30_32B_ID,Message Buffer 30 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x3 line.long 0x0 "MB50_16B_ID,Message Buffer 50 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x534++0x7 line.long 0x0 "MB75_8B_ID,Message Buffer 75 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB16_64B_WORD12,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB30_32B_WORD0,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB50_16B_WORD0,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x3 line.long 0x0 "MB75_8B_WORD0,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x538++0x7 line.long 0x0 "WORD075,Message Buffer 75 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB16_64B_WORD13,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB30_32B_WORD1,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB50_16B_WORD1,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x3 line.long 0x0 "MB75_8B_WORD1,Message Buffer 75 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x53C++0x7 line.long 0x0 "WORD175,Message Buffer 75 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS76,Message Buffer 76 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x540++0x3 line.long 0x0 "MB16_64B_WORD14,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB30_32B_WORD2,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x3 line.long 0x0 "MB50_16B_WORD2,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x540++0x7 line.long 0x0 "MB76_8B_CS,Message Buffer 76 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID76,Message Buffer 76 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x544++0x3 line.long 0x0 "MB16_64B_WORD15,Message Buffer 16 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB30_32B_WORD3,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x3 line.long 0x0 "MB50_16B_WORD3,Message Buffer 50 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x544++0x7 line.long 0x0 "MB76_8B_ID,Message Buffer 76 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_CS,Message Buffer 17 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB30_32B_WORD4,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x548++0x3 line.long 0x0 "MB51_16B_CS,Message Buffer 51 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x548++0x3 line.long 0x0 "MB76_8B_WORD0,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x548++0x7 line.long 0x0 "WORD076,Message Buffer 76 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_ID,Message Buffer 17 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB30_32B_WORD5,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x3 line.long 0x0 "MB51_16B_ID,Message Buffer 51 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x54C++0x3 line.long 0x0 "MB76_8B_WORD1,Message Buffer 76 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x54C++0x7 line.long 0x0 "WORD176,Message Buffer 76 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS77,Message Buffer 77 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x550++0x3 line.long 0x0 "MB17_64B_WORD0,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB30_32B_WORD6,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x550++0x3 line.long 0x0 "MB51_16B_WORD0,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x550++0x7 line.long 0x0 "MB77_8B_CS,Message Buffer 77 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID77,Message Buffer 77 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x554++0x3 line.long 0x0 "MB17_64B_WORD1,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB30_32B_WORD7,Message Buffer 30 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x554++0x3 line.long 0x0 "MB51_16B_WORD1,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x554++0x7 line.long 0x0 "MB77_8B_ID,Message Buffer 77 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD2,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB31_32B_CS,Message Buffer 31 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x558++0x3 line.long 0x0 "MB51_16B_WORD2,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x558++0x3 line.long 0x0 "MB77_8B_WORD0,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x558++0x7 line.long 0x0 "WORD077,Message Buffer 77 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD3,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB31_32B_ID,Message Buffer 31 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x55C++0x3 line.long 0x0 "MB51_16B_WORD3,Message Buffer 51 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x3 line.long 0x0 "MB77_8B_WORD1,Message Buffer 77 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x55C++0x7 line.long 0x0 "WORD177,Message Buffer 77 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS78,Message Buffer 78 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x3 line.long 0x0 "MB17_64B_WORD4,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB31_32B_WORD0,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x560++0x3 line.long 0x0 "MB52_16B_CS,Message Buffer 52 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x560++0x7 line.long 0x0 "MB78_8B_CS,Message Buffer 78 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID78,Message Buffer 78 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x3 line.long 0x0 "MB17_64B_WORD5,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB31_32B_WORD1,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x564++0x3 line.long 0x0 "MB52_16B_ID,Message Buffer 52 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x564++0x7 line.long 0x0 "MB78_8B_ID,Message Buffer 78 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD6,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB31_32B_WORD2,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB52_16B_WORD0,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x3 line.long 0x0 "MB78_8B_WORD0,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x568++0x7 line.long 0x0 "WORD078,Message Buffer 78 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD7,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB31_32B_WORD3,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB52_16B_WORD1,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x3 line.long 0x0 "MB78_8B_WORD1,Message Buffer 78 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x56C++0x7 line.long 0x0 "WORD178,Message Buffer 78 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS79,Message Buffer 79 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x570++0x3 line.long 0x0 "MB17_64B_WORD8,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB31_32B_WORD4,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x570++0x3 line.long 0x0 "MB52_16B_WORD2,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x570++0x7 line.long 0x0 "MB79_8B_CS,Message Buffer 79 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID79,Message Buffer 79 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x574++0x3 line.long 0x0 "MB17_64B_WORD9,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB31_32B_WORD5,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x574++0x3 line.long 0x0 "MB52_16B_WORD3,Message Buffer 52 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x574++0x7 line.long 0x0 "MB79_8B_ID,Message Buffer 79 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD10,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB31_32B_WORD6,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x578++0x3 line.long 0x0 "MB53_16B_CS,Message Buffer 53 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x578++0x3 line.long 0x0 "MB79_8B_WORD0,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x578++0x7 line.long 0x0 "WORD079,Message Buffer 79 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD11,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB31_32B_WORD7,Message Buffer 31 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x3 line.long 0x0 "MB53_16B_ID,Message Buffer 53 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x57C++0x3 line.long 0x0 "MB79_8B_WORD1,Message Buffer 79 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x57C++0x7 line.long 0x0 "WORD179,Message Buffer 79 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS80,Message Buffer 80 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB17_64B_WORD12,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x580++0x3 line.long 0x0 "MB32_32B_CS,Message Buffer 32 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x580++0x3 line.long 0x0 "MB53_16B_WORD0,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x580++0x7 line.long 0x0 "MB80_8B_CS,Message Buffer 80 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID80,Message Buffer 80 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB17_64B_WORD13,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x584++0x3 line.long 0x0 "MB32_32B_ID,Message Buffer 32 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x584++0x3 line.long 0x0 "MB53_16B_WORD1,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x584++0x7 line.long 0x0 "MB80_8B_ID,Message Buffer 80 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB17_64B_WORD14,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB32_32B_WORD0,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB53_16B_WORD2,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x588++0x3 line.long 0x0 "MB80_8B_WORD0,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x588++0x7 line.long 0x0 "WORD080,Message Buffer 80 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB17_64B_WORD15,Message Buffer 17 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB32_32B_WORD1,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB53_16B_WORD3,Message Buffer 53 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x3 line.long 0x0 "MB80_8B_WORD1,Message Buffer 80 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x58C++0x7 line.long 0x0 "WORD180,Message Buffer 80 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS81,Message Buffer 81 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB18_64B_CS,Message Buffer 18 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x3 line.long 0x0 "MB32_32B_WORD2,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x590++0x3 line.long 0x0 "MB54_16B_CS,Message Buffer 54 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x590++0x7 line.long 0x0 "MB81_8B_CS,Message Buffer 81 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID81,Message Buffer 81 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB18_64B_ID,Message Buffer 18 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x3 line.long 0x0 "MB32_32B_WORD3,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x594++0x3 line.long 0x0 "MB54_16B_ID,Message Buffer 54 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x594++0x7 line.long 0x0 "MB81_8B_ID,Message Buffer 81 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD0,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB32_32B_WORD4,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB54_16B_WORD0,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x3 line.long 0x0 "MB81_8B_WORD0,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x598++0x7 line.long 0x0 "WORD081,Message Buffer 81 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD1,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB32_32B_WORD5,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB54_16B_WORD1,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x3 line.long 0x0 "MB81_8B_WORD1,Message Buffer 81 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x59C++0x7 line.long 0x0 "WORD181,Message Buffer 81 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS82,Message Buffer 82 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A0++0x3 line.long 0x0 "MB18_64B_WORD2,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB32_32B_WORD6,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x3 line.long 0x0 "MB54_16B_WORD2,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5A0++0x7 line.long 0x0 "MB82_8B_CS,Message Buffer 82 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID82,Message Buffer 82 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5A4++0x3 line.long 0x0 "MB18_64B_WORD3,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB32_32B_WORD7,Message Buffer 32 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x3 line.long 0x0 "MB54_16B_WORD3,Message Buffer 54 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5A4++0x7 line.long 0x0 "MB82_8B_ID,Message Buffer 82 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD4,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x3 line.long 0x0 "MB33_32B_CS,Message Buffer 33 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB55_16B_CS,Message Buffer 55 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5A8++0x3 line.long 0x0 "MB82_8B_WORD0,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5A8++0x7 line.long 0x0 "WORD082,Message Buffer 82 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD5,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x3 line.long 0x0 "MB33_32B_ID,Message Buffer 33 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB55_16B_ID,Message Buffer 55 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5AC++0x3 line.long 0x0 "MB82_8B_WORD1,Message Buffer 82 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5AC++0x7 line.long 0x0 "WORD182,Message Buffer 82 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS83,Message Buffer 83 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5B0++0x3 line.long 0x0 "MB18_64B_WORD6,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB33_32B_WORD0,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x3 line.long 0x0 "MB55_16B_WORD0,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B0++0x7 line.long 0x0 "MB83_8B_CS,Message Buffer 83 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID83,Message Buffer 83 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5B4++0x3 line.long 0x0 "MB18_64B_WORD7,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB33_32B_WORD1,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x3 line.long 0x0 "MB55_16B_WORD1,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5B4++0x7 line.long 0x0 "MB83_8B_ID,Message Buffer 83 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD8,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB33_32B_WORD2,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB55_16B_WORD2,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x3 line.long 0x0 "MB83_8B_WORD0,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5B8++0x7 line.long 0x0 "WORD083,Message Buffer 83 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD9,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB33_32B_WORD3,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB55_16B_WORD3,Message Buffer 55 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x3 line.long 0x0 "MB83_8B_WORD1,Message Buffer 83 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5BC++0x7 line.long 0x0 "WORD183,Message Buffer 83 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS84,Message Buffer 84 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x3 line.long 0x0 "MB18_64B_WORD10,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB33_32B_WORD4,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5C0++0x3 line.long 0x0 "MB56_16B_CS,Message Buffer 56 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5C0++0x7 line.long 0x0 "MB84_8B_CS,Message Buffer 84 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID84,Message Buffer 84 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x3 line.long 0x0 "MB18_64B_WORD11,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB33_32B_WORD5,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5C4++0x3 line.long 0x0 "MB56_16B_ID,Message Buffer 56 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5C4++0x7 line.long 0x0 "MB84_8B_ID,Message Buffer 84 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB18_64B_WORD12,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB33_32B_WORD6,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB56_16B_WORD0,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x3 line.long 0x0 "MB84_8B_WORD0,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5C8++0x7 line.long 0x0 "WORD084,Message Buffer 84 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB18_64B_WORD13,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB33_32B_WORD7,Message Buffer 33 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB56_16B_WORD1,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x3 line.long 0x0 "MB84_8B_WORD1,Message Buffer 84 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5CC++0x7 line.long 0x0 "WORD184,Message Buffer 84 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS85,Message Buffer 85 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB18_64B_WORD14,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x3 line.long 0x0 "MB34_32B_CS,Message Buffer 34 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D0++0x3 line.long 0x0 "MB56_16B_WORD2,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5D0++0x7 line.long 0x0 "MB85_8B_CS,Message Buffer 85 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID85,Message Buffer 85 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB18_64B_WORD15,Message Buffer 18 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x3 line.long 0x0 "MB34_32B_ID,Message Buffer 34 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5D4++0x3 line.long 0x0 "MB56_16B_WORD3,Message Buffer 56 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5D4++0x7 line.long 0x0 "MB85_8B_ID,Message Buffer 85 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_CS,Message Buffer 19 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB34_32B_WORD0,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x3 line.long 0x0 "MB57_16B_CS,Message Buffer 57 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5D8++0x3 line.long 0x0 "MB85_8B_WORD0,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5D8++0x7 line.long 0x0 "WORD085,Message Buffer 85 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_ID,Message Buffer 19 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB34_32B_WORD1,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x3 line.long 0x0 "MB57_16B_ID,Message Buffer 57 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5DC++0x3 line.long 0x0 "MB85_8B_WORD1,Message Buffer 85 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5DC++0x7 line.long 0x0 "WORD185,Message Buffer 85 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS86,Message Buffer 86 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5E0++0x3 line.long 0x0 "MB19_64B_WORD0,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB34_32B_WORD2,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x3 line.long 0x0 "MB57_16B_WORD0,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E0++0x7 line.long 0x0 "MB86_8B_CS,Message Buffer 86 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID86,Message Buffer 86 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5E4++0x3 line.long 0x0 "MB19_64B_WORD1,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB34_32B_WORD3,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x3 line.long 0x0 "MB57_16B_WORD1,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5E4++0x7 line.long 0x0 "MB86_8B_ID,Message Buffer 86 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD2,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB34_32B_WORD4,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB57_16B_WORD2,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x3 line.long 0x0 "MB86_8B_WORD0,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5E8++0x7 line.long 0x0 "WORD086,Message Buffer 86 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD3,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB34_32B_WORD5,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB57_16B_WORD3,Message Buffer 57 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x3 line.long 0x0 "MB86_8B_WORD1,Message Buffer 86 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5EC++0x7 line.long 0x0 "WORD186,Message Buffer 86 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS87,Message Buffer 87 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x3 line.long 0x0 "MB19_64B_WORD4,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB34_32B_WORD6,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F0++0x3 line.long 0x0 "MB58_16B_CS,Message Buffer 58 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F0++0x7 line.long 0x0 "MB87_8B_CS,Message Buffer 87 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID87,Message Buffer 87 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x3 line.long 0x0 "MB19_64B_WORD5,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB34_32B_WORD7,Message Buffer 34 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5F4++0x3 line.long 0x0 "MB58_16B_ID,Message Buffer 58 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5F4++0x7 line.long 0x0 "MB87_8B_ID,Message Buffer 87 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD6,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB35_32B_CS,Message Buffer 35 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x5F8++0x3 line.long 0x0 "MB58_16B_WORD0,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x3 line.long 0x0 "MB87_8B_WORD0,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x5F8++0x7 line.long 0x0 "WORD087,Message Buffer 87 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD7,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB35_32B_ID,Message Buffer 35 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x5FC++0x3 line.long 0x0 "MB58_16B_WORD1,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x3 line.long 0x0 "MB87_8B_WORD1,Message Buffer 87 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x5FC++0x7 line.long 0x0 "WORD187,Message Buffer 87 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS88,Message Buffer 88 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x600++0x3 line.long 0x0 "MB19_64B_WORD8,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB35_32B_WORD0,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x600++0x3 line.long 0x0 "MB58_16B_WORD2,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x600++0x7 line.long 0x0 "MB88_8B_CS,Message Buffer 88 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID88,Message Buffer 88 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x604++0x3 line.long 0x0 "MB19_64B_WORD9,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB35_32B_WORD1,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x604++0x3 line.long 0x0 "MB58_16B_WORD3,Message Buffer 58 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x604++0x7 line.long 0x0 "MB88_8B_ID,Message Buffer 88 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD10,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB35_32B_WORD2,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x608++0x3 line.long 0x0 "MB59_16B_CS,Message Buffer 59 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x608++0x3 line.long 0x0 "MB88_8B_WORD0,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x608++0x7 line.long 0x0 "WORD088,Message Buffer 88 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD11,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB35_32B_WORD3,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x3 line.long 0x0 "MB59_16B_ID,Message Buffer 59 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x60C++0x3 line.long 0x0 "MB88_8B_WORD1,Message Buffer 88 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x60C++0x7 line.long 0x0 "WORD188,Message Buffer 88 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS89,Message Buffer 89 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x610++0x3 line.long 0x0 "MB19_64B_WORD12,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB35_32B_WORD4,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x610++0x3 line.long 0x0 "MB59_16B_WORD0,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x610++0x7 line.long 0x0 "MB89_8B_CS,Message Buffer 89 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID89,Message Buffer 89 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x614++0x3 line.long 0x0 "MB19_64B_WORD13,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB35_32B_WORD5,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x614++0x3 line.long 0x0 "MB59_16B_WORD1,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x614++0x7 line.long 0x0 "MB89_8B_ID,Message Buffer 89 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB19_64B_WORD14,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB35_32B_WORD6,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB59_16B_WORD2,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x618++0x3 line.long 0x0 "MB89_8B_WORD0,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x618++0x7 line.long 0x0 "WORD089,Message Buffer 89 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB19_64B_WORD15,Message Buffer 19 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB35_32B_WORD7,Message Buffer 35 WORD_32B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB59_16B_WORD3,Message Buffer 59 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x3 line.long 0x0 "MB89_8B_WORD1,Message Buffer 89 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x61C++0x7 line.long 0x0 "WORD189,Message Buffer 89 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS90,Message Buffer 90 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB20_64B_CS,Message Buffer 20 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x3 line.long 0x0 "MB60_16B_CS,Message Buffer 60 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x620++0x7 line.long 0x0 "MB90_8B_CS,Message Buffer 90 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID90,Message Buffer 90 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB20_64B_ID,Message Buffer 20 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x3 line.long 0x0 "MB60_16B_ID,Message Buffer 60 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x624++0x7 line.long 0x0 "MB90_8B_ID,Message Buffer 90 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD0,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB60_16B_WORD0,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x3 line.long 0x0 "MB90_8B_WORD0,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x628++0x7 line.long 0x0 "WORD090,Message Buffer 90 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD1,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB60_16B_WORD1,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x3 line.long 0x0 "MB90_8B_WORD1,Message Buffer 90 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x62C++0x7 line.long 0x0 "WORD190,Message Buffer 90 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS91,Message Buffer 91 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x630++0x3 line.long 0x0 "MB20_64B_WORD2,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x3 line.long 0x0 "MB60_16B_WORD2,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x630++0x7 line.long 0x0 "MB91_8B_CS,Message Buffer 91 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID91,Message Buffer 91 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x634++0x3 line.long 0x0 "MB20_64B_WORD3,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x3 line.long 0x0 "MB60_16B_WORD3,Message Buffer 60 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x634++0x7 line.long 0x0 "MB91_8B_ID,Message Buffer 91 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD4,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame." group.long 0x638++0x3 line.long 0x0 "MB61_16B_CS,Message Buffer 61 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x638++0x3 line.long 0x0 "MB91_8B_WORD0,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x638++0x7 line.long 0x0 "WORD091,Message Buffer 91 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD5,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x3 line.long 0x0 "MB61_16B_ID,Message Buffer 61 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x63C++0x3 line.long 0x0 "MB91_8B_WORD1,Message Buffer 91 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x63C++0x7 line.long 0x0 "WORD191,Message Buffer 91 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS92,Message Buffer 92 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x640++0x3 line.long 0x0 "MB20_64B_WORD6,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame." group.long 0x640++0x3 line.long 0x0 "MB61_16B_WORD0,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x640++0x7 line.long 0x0 "MB92_8B_CS,Message Buffer 92 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID92,Message Buffer 92 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x644++0x3 line.long 0x0 "MB20_64B_WORD7,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame." group.long 0x644++0x3 line.long 0x0 "MB61_16B_WORD1,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x644++0x7 line.long 0x0 "MB92_8B_ID,Message Buffer 92 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD8,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB61_16B_WORD2,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x648++0x3 line.long 0x0 "MB92_8B_WORD0,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x648++0x7 line.long 0x0 "WORD092,Message Buffer 92 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD9,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB61_16B_WORD3,Message Buffer 61 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x3 line.long 0x0 "MB92_8B_WORD1,Message Buffer 92 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x64C++0x7 line.long 0x0 "WORD192,Message Buffer 92 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS93,Message Buffer 93 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x3 line.long 0x0 "MB20_64B_WORD10,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame." group.long 0x650++0x3 line.long 0x0 "MB62_16B_CS,Message Buffer 62 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x650++0x7 line.long 0x0 "MB93_8B_CS,Message Buffer 93 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID93,Message Buffer 93 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x3 line.long 0x0 "MB20_64B_WORD11,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame." group.long 0x654++0x3 line.long 0x0 "MB62_16B_ID,Message Buffer 62 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x654++0x7 line.long 0x0 "MB93_8B_ID,Message Buffer 93 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB20_64B_WORD12,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB62_16B_WORD0,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x3 line.long 0x0 "MB93_8B_WORD0,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x658++0x7 line.long 0x0 "WORD093,Message Buffer 93 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB20_64B_WORD13,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB62_16B_WORD1,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x3 line.long 0x0 "MB93_8B_WORD1,Message Buffer 93 WORD_8B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x65C++0x7 line.long 0x0 "WORD193,Message Buffer 93 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS94,Message Buffer 94 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x660++0x3 line.long 0x0 "MB20_64B_WORD14,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame." group.long 0x660++0x3 line.long 0x0 "MB62_16B_WORD2,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame." group.long 0x660++0x7 line.long 0x0 "MB94_8B_CS,Message Buffer 94 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID94,Message Buffer 94 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x664++0x3 line.long 0x0 "MB20_64B_WORD15,Message Buffer 20 WORD_64B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame." group.long 0x664++0x3 line.long 0x0 "MB62_16B_WORD3,Message Buffer 62 WORD_16B Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame." group.long 0x664++0x7 line.long 0x0 "MB94_8B_ID,Message Buffer 94 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB94_8B_WORD0,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x668++0x7 line.long 0x0 "WORD094,Message Buffer 94 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB94_8B_WORD1,Message Buffer 94 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x66C++0x7 line.long 0x0 "WORD194,Message Buffer 94 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." line.long 0x4 "CS95,Message Buffer 95 CS Register" bitfld.long 0x4 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x4 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x4 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x4 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x4 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x4 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x4 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x4 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x4 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." group.long 0x670++0x7 line.long 0x0 "MB95_8B_CS,Message Buffer 95 CS Register" bitfld.long 0x0 31. "EDL,Extended Data Length. This bit distinguishes between CAN format and CAN FD format frames. The EDL bit must not be set for Message Buffers configured to RANSWER with code field 0b1010." "0,1" bitfld.long 0x0 30. "BRS,Bit Rate Switch. This bit defines whether the bit rate is switched inside a CAN FD format frame." "0,1" newline bitfld.long 0x0 29. "ESI,Error State Indicator. This bit indicates if the transmitting node is error active or error passive." "0,1" hexmask.long.byte 0x0 24.--27. 1. "CODE,Message Buffer Code. This 4-bit field can be accessed (read or write) by the CPU and by the FlexCAN module itself as part of the message buffer matching and arbitration process." newline bitfld.long 0x0 22. "SRR,Substitute Remote Request. Contains a fixed recessive bit." "0,1" bitfld.long 0x0 21. "IDE,ID Extended. One/zero for extended/standard format frame." "0,1" newline bitfld.long 0x0 20. "RTR,Remote Transmission Request. One/zero for remote/data frame." "0,1" hexmask.long.byte 0x0 16.--19. 1. "DLC,Length of the data to be stored/transmitted." newline hexmask.long.word 0x0 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp. This 16-bit field is a copy of the Free-Running Timer captured for Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus." line.long 0x4 "ID95,Message Buffer 95 ID Register" bitfld.long 0x4 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x4 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x4 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." group.long 0x674++0x7 line.long 0x0 "MB95_8B_ID,Message Buffer 95 ID Register" bitfld.long 0x0 29.--31. "PRIO,Local priority. This 3-bit fieldis only used when LPRIO_EN bit is set in MCR and it only makes sense for Tx buffers. These bits are not transmitted. They are appended to the regular ID to define the transmission priority." "?,?,?,3: bit fieldis only used when LPRIO_EN bit is set..,?,?,?,?" hexmask.long.word 0x0 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer." newline hexmask.long.tbyte 0x0 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer." line.long 0x4 "MB95_8B_WORD0,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." group.long 0x678++0x7 line.long 0x0 "WORD095,Message Buffer 95 WORD0 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame." line.long 0x4 "MB95_8B_WORD1,Message Buffer 95 WORD_8B Register" hexmask.long.byte 0x4 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x4 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x4 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x4 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." group.long 0x67C++0x3 line.long 0x0 "WORD195,Message Buffer 95 WORD1 Register" hexmask.long.byte 0x0 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame." hexmask.long.byte 0x0 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame." newline hexmask.long.byte 0x0 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame." hexmask.long.byte 0x0 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame." repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "RXIMR[$1],Rx Individual Mask Registers" hexmask.long 0x0 0.--31. 1. "MI,Individual Mask Bits" repeat.end group.long 0xAE0++0xF line.long 0x0 "MECR,Memory Error Control Register" bitfld.long 0x0 31. "ECRWRDIS,Error Configuration Register Write Disable" "0: Write is enabled.,1: Write is disabled." bitfld.long 0x0 19. "HANCEI_MSK,Host Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 18. "FANCEI_MSK,FlexCAN Access With Non-Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." bitfld.long 0x0 16. "CEI_MSK,Correctable Errors Interrupt Mask" "0: Interrupt is disabled.,1: Interrupt is enabled." newline bitfld.long 0x0 15. "HAERRIE,Host Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." bitfld.long 0x0 14. "FAERRIE,FlexCAN Access Error Injection Enable" "0: Injection is disabled.,1: Injection is enabled." newline bitfld.long 0x0 13. "EXTERRIE,Extended Error Injection Enable" "0: Error injection is applied only to the 32-bit..,1: Error injection is applied to the 64-bit word." bitfld.long 0x0 9. "RERRDIS,Error Report Disable" "0: Enable updates of the error report registers.,1: Disable updates of the error report registers." newline bitfld.long 0x0 8. "ECCDIS,Error Correction Disable" "0: Enable memory error correction.,1: Disable memory error correction." bitfld.long 0x0 7. "NCEFAFRZ,Non-Correctable Errors In FlexCAN Access Put Device In Freeze Mode" "0: Keep normal operation.,1: Put FlexCAN in Freeze mode (see section 'Freeze.." line.long 0x4 "ERRIAR,Error Injection Address Register" hexmask.long.word 0x4 2.--13. 1. "INJADDR_H,Error Injection Address High" rbitfld.long 0x4 0.--1. "INJADDR_L,Error Injection Address Low" "0,1,2,3" line.long 0x8 "ERRIDPR,Error Injection Data Pattern Register" hexmask.long 0x8 0.--31. 1. "DFLIP,Data flip pattern" line.long 0xC "ERRIPPR,Error Injection Parity Pattern Register" hexmask.long.byte 0xC 24.--28. 1. "PFLIP3,Parity Flip Pattern For Byte 3 (most significant)" hexmask.long.byte 0xC 16.--20. 1. "PFLIP2,Parity Flip Pattern For Byte 2" newline hexmask.long.byte 0xC 8.--12. 1. "PFLIP1,Parity Flip Pattern For Byte 1" hexmask.long.byte 0xC 0.--4. 1. "PFLIP0,Parity Flip Pattern For Byte 0 (Least Significant)" rgroup.long 0xAF0++0xB line.long 0x0 "RERRAR,Error Report Address Register" bitfld.long 0x0 24. "NCE,Non-Correctable Error" "0: Reporting a correctable error,1: Reporting a non-correctable error" bitfld.long 0x0 16.--18. "SAID,SAID" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x0 0.--13. 1. "ERRADDR,Address Where Error Detected" line.long 0x4 "RERRDR,Error Report Data Register" hexmask.long 0x4 0.--31. 1. "RDATA,Raw data word read from memory with error" line.long 0x8 "RERRSYNR,Error Report Syndrome Register" bitfld.long 0x8 31. "BE3,Byte Enabled For Byte 3 (most significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 24.--28. 1. "SYND3,Error Syndrome For Byte 3 (most significant)" newline bitfld.long 0x8 23. "BE2,Byte Enabled For Byte 2" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 16.--20. 1. "SYND2,Error Syndrome For Byte 2" newline bitfld.long 0x8 15. "BE1,Byte Enabled For Byte 1" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 8.--12. 1. "SYND1,Error Syndrome for Byte 1" newline bitfld.long 0x8 7. "BE0,Byte Enabled For Byte 0 (least significant)" "0: The byte was not read.,1: The byte was read." hexmask.long.byte 0x8 0.--4. 1. "SYND0,Error Syndrome For Byte 0 (least significant)" group.long 0xAFC++0x3 line.long 0x0 "ERRSR,Error Status Register" eventfld.long 0x0 19. "HANCEIF,Host Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in host..,1: A non-correctable error was detected in a host.." eventfld.long 0x0 18. "FANCEIF,FlexCAN Access With Non-Correctable Error Interrupt Flag" "0: No non-correctable errors were detected in..,1: A non-correctable error was detected in a.." newline eventfld.long 0x0 16. "CEIF,Correctable Error Interrupt Flag" "0: No correctable errors were detected so far.,1: A correctable error was detected." eventfld.long 0x0 3. "HANCEIOF,Host Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in host..,1: Overrun on non-correctable errors in host access" newline eventfld.long 0x0 2. "FANCEIOF,FlexCAN Access With Non-Correctable Error Interrupt Overrun Flag" "0: No overrun on non-correctable errors in FlexCAN..,1: Overrun on non-correctable errors in FlexCAN.." eventfld.long 0x0 0. "CEIOF,Correctable Error Interrupt Overrun Flag" "0: No overrun on correctable errors,1: Overrun on correctable errors" group.long 0xBF0++0x17 line.long 0x0 "EPRS,Enhanced CAN Bit Timing Prescalers" hexmask.long.word 0x0 16.--25. 1. "EDPRESDIV,Extended Data Phase Prescaler Division Factor" hexmask.long.word 0x0 0.--9. 1. "ENPRESDIV,Extended Nominal Prescaler Division Factor" line.long 0x4 "ENCBT,Enhanced Nominal CAN Bit Timing" hexmask.long.byte 0x4 22.--28. 1. "NRJW,Nominal Resynchronization Jump Width" hexmask.long.byte 0x4 12.--18. 1. "NTSEG2,Nominal Time Segment 2" newline hexmask.long.byte 0x4 0.--7. 1. "NTSEG1,Nominal Time Segment 1" line.long 0x8 "EDCBT,Enhanced Data Phase CAN bit Timing" hexmask.long.byte 0x8 22.--25. 1. "DRJW,Data Phase Resynchronization Jump Width" hexmask.long.byte 0x8 12.--15. 1. "DTSEG2,Data Phase Time Segment 2" newline hexmask.long.byte 0x8 0.--4. 1. "DTSEG1,Data Phase Segment 1" line.long 0xC "ETDC,Enhanced Transceiver Delay Compensation" bitfld.long 0xC 31. "ETDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" bitfld.long 0xC 30. "TDMDIS,Transceiver Delay Measurement Disable" "0: TDC measurement is enabled,1: TDC measurement is disabled" newline hexmask.long.byte 0xC 16.--22. 1. "ETDCOFF,Enhanced Transceiver Delay Compensation Offset" eventfld.long 0xC 15. "ETDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0xC 0.--7. 1. "ETDCVAL,Enhanced Transceiver Delay Compensation Value" line.long 0x10 "FDCTRL,CAN FD Control Register" bitfld.long 0x10 31. "FDRATE,Bit Rate Switch Enable" "0: Transmit a frame in nominal rate. The BRS bit in..,1: Transmit a frame with bit rate switching if the.." bitfld.long 0x10 22.--23. "MBDSR2,Message Buffer Data Size for Region 2" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." bitfld.long 0x10 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0: Selects 8 bytes per message buffer.,1: Selects 16 bytes per message buffer.,2: Selects 32 bytes per message buffer.,3: Selects 64 bytes per message buffer." newline bitfld.long 0x10 15. "TDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" eventfld.long 0x10 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range.,1: Measured loop delay is out of range." newline hexmask.long.byte 0x10 8.--12. 1. "TDCOFF,Transceiver Delay Compensation Offset" hexmask.long.byte 0x10 0.--5. 1. "TDCVAL,Transceiver Delay Compensation Value" line.long 0x14 "FDCBT,CAN FD Bit Timing Register" hexmask.long.word 0x14 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor" bitfld.long 0x14 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x14 10.--14. 1. "FPROPSEG,Fast Propagation Segment" bitfld.long 0x14 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7" rgroup.long 0xC08++0x3 line.long 0x0 "FDCRC,CAN FD CRC Register" hexmask.long.byte 0x0 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC" hexmask.long.tbyte 0x0 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value" group.long 0xC0C++0xB line.long 0x0 "ERFCR,Enhanced Rx FIFO Control Register" bitfld.long 0x0 31. "ERFEN,Enhanced Rx FIFO enable" "0: Enhanced Rx FIFO is disabled,1: Enhanced Rx FIFO is enabled" hexmask.long.byte 0x0 26.--30. 1. "DMALW,DMA Last Word" newline hexmask.long.byte 0x0 16.--22. 1. "NEXIF,Number of Extended ID Filter Elements" hexmask.long.byte 0x0 8.--13. 1. "NFE,Number of Enhanced Rx FIFO Filter Elements" newline hexmask.long.byte 0x0 0.--4. 1. "ERFWM,Enhanced Rx FIFO Watermark" line.long 0x4 "ERFIER,Enhanced Rx FIFO Interrupt Enable Register" bitfld.long 0x4 31. "ERFUFWIE,Enhanced Rx FIFO Underflow Interrupt Enable" "0: Enhanced Rx FIFO Underflow interrupt is disabled,1: Enhanced Rx FIFO Underflow interrupt is enabled" bitfld.long 0x4 30. "ERFOVFIE,Enhanced Rx FIFO Overflow Interrupt Enable" "0: Enhanced Rx FIFO Overflow is disabled,1: Enhanced Rx FIFO Overflow is enabled" newline bitfld.long 0x4 29. "ERFWMIIE,Enhanced Rx FIFO Watermark Indication Interrupt Enable" "0: Enhanced Rx FIFO Watermark interrupt is disabled,1: Enhanced Rx FIFO Watermark interrupt is enabled" bitfld.long 0x4 28. "ERFDAIE,Enhanced Rx FIFO Data Available Interrupt Enable" "0: Enhanced Rx FIFO Data Available interrupt is..,1: Enhanced Rx FIFO Data Available interrupt is.." line.long 0x8 "ERFSR,Enhanced Rx FIFO Status Register" eventfld.long 0x8 31. "ERFUFW,Enhanced Rx FIFO Underflow" "0: No such occurrence,1: Enhanced Rx FIFO underflow" eventfld.long 0x8 30. "ERFOVF,Enhanced Rx FIFO Overflow" "0: No such occurrence,1: Enhanced Rx FIFO overflow" newline eventfld.long 0x8 29. "ERFWMI,Enhanced Rx FIFO Watermark Indication" "0: No such occurrence,1: The number of messages in FIFO is greater than.." eventfld.long 0x8 28. "ERFDA,Enhanced Rx FIFO Data Available" "0: No such occurrence,1: There is at least one message stored in Enhanced.." newline bitfld.long 0x8 27. "ERFCLR,Enhanced Rx FIFO Clear" "0: No effect,1: Clear Enhanced Rx FIFO content" rbitfld.long 0x8 17. "ERFE,Enhanced Rx FIFO empty" "0: Enhanced Rx FIFO is not empty,1: Enhanced Rx FIFO is empty" newline rbitfld.long 0x8 16. "ERFF,Enhanced Rx FIFO full" "0: Enhanced Rx FIFO is not full,1: Enhanced Rx FIFO is full" hexmask.long.byte 0x8 0.--5. 1. "ERFEL,Enhanced Rx FIFO Elements" repeat 96. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC30)++0x3 line.long 0x0 "HR_TIME_STAMP[$1],High Resolution Time Stamp" hexmask.long 0x0 0.--31. 1. "TS,High Resolution Time Stamp" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x3000)++0x3 line.long 0x0 "ERFFEL[$1],Enhanced Rx FIFO Filter Element" hexmask.long 0x0 0.--31. 1. "FEL,Filter Element Bits" repeat.end tree.end tree.end tree "WAKEUP_CMU" tree "CMU1" base ad:0x42750000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree "CMU2" base ad:0x427A0000 group.long 0x0++0x17 line.long 0x0 "GCR,Global Configuration Register" bitfld.long 0x0 0. "FCE,Frequency Check Enable" "0: Stops frequency checking,1: Starts frequency checking" line.long 0x4 "RCCR,Reference Count Configuration Register" hexmask.long.word 0x4 0.--15. 1. "REF_CNT,Reference clock count" line.long 0x8 "HTCR,High Threshold Configuration Register" hexmask.long.tbyte 0x8 0.--23. 1. "HFREF,High frequency reference threshold" line.long 0xC "LTCR,Low Threshold Configuration Register" hexmask.long.tbyte 0xC 0.--23. 1. "LFREF,Low Frequency Reference Threshold" line.long 0x10 "SR,Status Register" rbitfld.long 0x10 4. "RS,Run Status" "0: Frequency check stopped,1: Frequency check running" eventfld.long 0x10 1. "FHH,Frequency higher than high frequency reference threshold event status" "0: No FHH event,1: FHH event occurred" eventfld.long 0x10 0. "FLL,Frequency lower than low frequency reference threshold event status" "0: No FLL event,1: FLL event occurred" line.long 0x14 "IER,Interrupt Enable Register" bitfld.long 0x14 3. "FHHAIE,Frequency Higher than High Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FHH event interrupt disabled,1: Asynchronous FHH event interrupt enabled" bitfld.long 0x14 2. "FLLAIE,Frequency Lower than Low Frequency Reference Threshold Asynchronous Interrupt Enable" "0: Asynchronous FLL event interrupt disabled,1: Asynchronous FLL event interrupt enabled" tree.end tree.end tree "WAKEUP_DMA_CRC" base ad:0x427B0000 group.long 0x0++0x3 line.long 0x0 "GEC,Global Enable CRC Register" bitfld.long 0x0 7. "SWAP_BYTE,Swap Byte" "0: Do not swap.,1: Byte-wise swap on the input data." bitfld.long 0x0 0. "GBL_EN,Global Enable bit" "0: Disable CRC in all channels.,1: Enable CRC in all channels." repeat 8. (list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7)(list ad:0x427B0010 ad:0x427B0020 ad:0x427B0030 ad:0x427B0040 ad:0x427B0050 ad:0x427B0060 ad:0x427B0070 ad:0x427B0080) tree "Control_Register[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CTL,CRC Control Register" bitfld.long 0x0 31. "EN,CRC Logic" "0: Disable CRC.,1: Enable CRC." bitfld.long 0x0 16.--18. "MODE,CRC Mode" "0: Normal CRC Mode. All other combinations are..,?,?,?,?,?,?,?" newline bitfld.long 0x0 15. "INIT_SEL,Initial values of the CRC" "0: Initialize CRC with the content of the Initial..,1: Continue accumulating previous CRC values stored.." bitfld.long 0x0 14. "SWAP_BIT,Swap Bit" "0: Do not swap.,1: Perform bit-wise swap within each byte of the.." newline bitfld.long 0x0 13. "CS_SWAP,Swap the checksum output bit-wise." "0: Do not swap.,1: Perform bit-wise swap within each byte of the.." bitfld.long 0x0 12. "CS_XOR,XOR the checksum with all 1's." "0: Do not apply the XOR.,1: Perform XOR of FFFFFFFFh to the checksum for.." newline bitfld.long 0x0 8.--10. "POLY_SEL,Polynomial Select" "0: Select CRC-32 0x04C11DB7.,1: Select CRC-32 0x1EDC6F41.,2: Select CRC-32 0xF4ACFB13.,3: Select CRC-16 0x1021.,4: Select CRC-8 0x2F.,5: Select CRC-8 0x1D.,?,?" hexmask.long.byte 0x0 0.--5. 1. "CH_SEL,Channel Select" line.long 0x4 "ICRC,Initial CRC Value Register" hexmask.long 0x4 0.--31. 1. "INI_CRC_VAL,Initial CRC Value" rgroup.long ($2+0x8)++0x3 line.long 0x0 "FCRC,Final CRC Value Register" hexmask.long 0x0 0.--31. 1. "CHKSUM_VAL,Final CRC Value" tree.end repeat.end tree.end tree "WAKEUP_EARC_PHY" base ad:0x42000000 group.long 0x0++0x5F line.long 0x0 "CTRL,Control" bitfld.long 0x0 29. "EN_SPDIF_WAKEUP_INT,Enable wakeup interrupt if SPDIF data is detected." "0,1" bitfld.long 0x0 27. "EN_ARC_DATA,This bit is used for gating ARC data and clock to the controller" "0,1" bitfld.long 0x0 25.--26. "SEL_TX_CLK,These bits are used for selecting the HDMI TX AVPLL clock or Audio SS clock for DMAC/SPDIF TX datapath." "0,1,2,3" bitfld.long 0x0 23. "BG_EN,Bandgap Enable" "0,1" newline bitfld.long 0x0 19. "DIS_CM_RX_DATA,Common mode receive data disable" "0,1" bitfld.long 0x0 17. "LBACK_DIFF_EN,Differential mode loopback test enable" "0,1" bitfld.long 0x0 16. "LBACK_CM_EN,Common mode loopback test enable" "0,1" bitfld.long 0x0 15. "DIS_TIMED_SPDIF_INT,Common mode receive data disable" "0,1" newline bitfld.long 0x0 10. "ARC_MODE_CM_EN,ARC common mode receiver enable" "0,1" bitfld.long 0x0 9. "ARC_MODE_SE_EN,ARC single ended receiver enable" "0,1" bitfld.long 0x0 8. "SPDIF_EN,SPDIF enable" "0,1" bitfld.long 0x0 6.--7. "TRACKING_EN_B,Selects between fixed / tracking reference voltage." "0,1,2,3" newline bitfld.long 0x0 5. "TX_DIFF_OE,Differential Receiver Output enable." "0,1" bitfld.long 0x0 4. "RX_DIFF_IE,Differential Receiver Input enable." "0,1" bitfld.long 0x0 3. "TX_CM_VREF_SEL,Common mode transmitter termination voltage select." "0,1" bitfld.long 0x0 2. "RX_CM_VREF_SEL,Common mode reference voltage select for Single ended (ARC) and common mode (ARC and eARC) inputs." "0,1" newline bitfld.long 0x0 1. "RX_CM_IE,Common mode Receiver Input enable." "0,1" bitfld.long 0x0 0. "PHY_EN,PHY enable." "0,1" line.long 0x4 "CTRL_SET,Control" bitfld.long 0x4 29. "EN_SPDIF_WAKEUP_INT,Enable wakeup interrupt if SPDIF data is detected." "0,1" bitfld.long 0x4 27. "EN_ARC_DATA,This bit is used for gating ARC data and clock to the controller" "0,1" bitfld.long 0x4 25.--26. "SEL_TX_CLK,These bits are used for selecting the HDMI TX AVPLL clock or Audio SS clock for DMAC/SPDIF TX datapath." "0,1,2,3" bitfld.long 0x4 23. "BG_EN,Bandgap Enable" "0,1" newline bitfld.long 0x4 19. "DIS_CM_RX_DATA,Common mode receive data disable" "0,1" bitfld.long 0x4 17. "LBACK_DIFF_EN,Differential mode loopback test enable" "0,1" bitfld.long 0x4 16. "LBACK_CM_EN,Common mode loopback test enable" "0,1" bitfld.long 0x4 15. "DIS_TIMED_SPDIF_INT,Common mode receive data disable" "0,1" newline bitfld.long 0x4 10. "ARC_MODE_CM_EN,ARC common mode receiver enable" "0,1" bitfld.long 0x4 9. "ARC_MODE_SE_EN,ARC single ended receiver enable" "0,1" bitfld.long 0x4 8. "SPDIF_EN,SPDIF enable" "0,1" bitfld.long 0x4 6.--7. "TRACKING_EN_B,Selects between fixed / tracking reference voltage." "0,1,2,3" newline bitfld.long 0x4 5. "TX_DIFF_OE,Differential Receiver Output enable." "0,1" bitfld.long 0x4 4. "RX_DIFF_IE,Differential Receiver Input enable." "0,1" bitfld.long 0x4 3. "TX_CM_VREF_SEL,Common mode transmitter termination voltage select." "0,1" bitfld.long 0x4 2. "RX_CM_VREF_SEL,Common mode reference voltage select for Single ended (ARC) and common mode (ARC and eARC) inputs." "0,1" newline bitfld.long 0x4 1. "RX_CM_IE,Common mode Receiver Input enable." "0,1" bitfld.long 0x4 0. "PHY_EN,PHY enable." "0,1" line.long 0x8 "CTRL_CLR,Control" eventfld.long 0x8 29. "EN_SPDIF_WAKEUP_INT,Enable wakeup interrupt if SPDIF data is detected." "0,1" eventfld.long 0x8 27. "EN_ARC_DATA,This bit is used for gating ARC data and clock to the controller" "0,1" eventfld.long 0x8 25.--26. "SEL_TX_CLK,These bits are used for selecting the HDMI TX AVPLL clock or Audio SS clock for DMAC/SPDIF TX datapath." "0,1,2,3" eventfld.long 0x8 23. "BG_EN,Bandgap Enable" "0,1" newline eventfld.long 0x8 19. "DIS_CM_RX_DATA,Common mode receive data disable" "0,1" eventfld.long 0x8 17. "LBACK_DIFF_EN,Differential mode loopback test enable" "0,1" eventfld.long 0x8 16. "LBACK_CM_EN,Common mode loopback test enable" "0,1" eventfld.long 0x8 15. "DIS_TIMED_SPDIF_INT,Common mode receive data disable" "0,1" newline eventfld.long 0x8 10. "ARC_MODE_CM_EN,ARC common mode receiver enable" "0,1" eventfld.long 0x8 9. "ARC_MODE_SE_EN,ARC single ended receiver enable" "0,1" eventfld.long 0x8 8. "SPDIF_EN,SPDIF enable" "0,1" eventfld.long 0x8 6.--7. "TRACKING_EN_B,Selects between fixed / tracking reference voltage." "0,1,2,3" newline eventfld.long 0x8 5. "TX_DIFF_OE,Differential Receiver Output enable." "0,1" eventfld.long 0x8 4. "RX_DIFF_IE,Differential Receiver Input enable." "0,1" eventfld.long 0x8 3. "TX_CM_VREF_SEL,Common mode transmitter termination voltage select." "0,1" eventfld.long 0x8 2. "RX_CM_VREF_SEL,Common mode reference voltage select for Single ended (ARC) and common mode (ARC and eARC) inputs." "0,1" newline eventfld.long 0x8 1. "RX_CM_IE,Common mode Receiver Input enable." "0,1" eventfld.long 0x8 0. "PHY_EN,PHY enable." "0,1" line.long 0xC "CTRL_TOG,Control" bitfld.long 0xC 29. "EN_SPDIF_WAKEUP_INT,Enable wakeup interrupt if SPDIF data is detected." "0,1" bitfld.long 0xC 27. "EN_ARC_DATA,This bit is used for gating ARC data and clock to the controller" "0,1" bitfld.long 0xC 25.--26. "SEL_TX_CLK,These bits are used for selecting the HDMI TX AVPLL clock or Audio SS clock for DMAC/SPDIF TX datapath." "0,1,2,3" bitfld.long 0xC 23. "BG_EN,Bandgap Enable" "0,1" newline bitfld.long 0xC 19. "DIS_CM_RX_DATA,Common mode receive data disable" "0,1" bitfld.long 0xC 17. "LBACK_DIFF_EN,Differential mode loopback test enable" "0,1" bitfld.long 0xC 16. "LBACK_CM_EN,Common mode loopback test enable" "0,1" bitfld.long 0xC 15. "DIS_TIMED_SPDIF_INT,Common mode receive data disable" "0,1" newline bitfld.long 0xC 10. "ARC_MODE_CM_EN,ARC common mode receiver enable" "0,1" bitfld.long 0xC 9. "ARC_MODE_SE_EN,ARC single ended receiver enable" "0,1" bitfld.long 0xC 8. "SPDIF_EN,SPDIF enable" "0,1" bitfld.long 0xC 6.--7. "TRACKING_EN_B,Selects between fixed / tracking reference voltage." "0,1,2,3" newline bitfld.long 0xC 5. "TX_DIFF_OE,Differential Receiver Output enable." "0,1" bitfld.long 0xC 4. "RX_DIFF_IE,Differential Receiver Input enable." "0,1" bitfld.long 0xC 3. "TX_CM_VREF_SEL,Common mode transmitter termination voltage select." "0,1" bitfld.long 0xC 2. "RX_CM_VREF_SEL,Common mode reference voltage select for Single ended (ARC) and common mode (ARC and eARC) inputs." "0,1" newline bitfld.long 0xC 1. "RX_CM_IE,Common mode Receiver Input enable." "0,1" bitfld.long 0xC 0. "PHY_EN,PHY enable." "0,1" line.long 0x10 "STATUS,Status register" hexmask.long.word 0x10 16.--31. 1. "ERR_CNT,Error Count" rbitfld.long 0x10 5. "POWER_STABLE,Power stable" "0,1" eventfld.long 0x10 4. "SPDIF_WAKEUP_REC,SPDIF activity detected" "0,1" rbitfld.long 0x10 3. "CM_RX_DATA,Common mode received data" "0,1" newline rbitfld.long 0x10 2. "DIFF_RX_DATA,Differential received data" "0,1" rbitfld.long 0x10 1. "ARC_PLOCK,ARC PLOCK achieved." "0,1" eventfld.long 0x10 0. "ERR_REC,Error in data processing" "0,1" line.long 0x14 "STATUS_SET,Status register" hexmask.long.word 0x14 16.--31. 1. "ERR_CNT,Error Count" rbitfld.long 0x14 5. "POWER_STABLE,Power stable" "0,1" bitfld.long 0x14 4. "SPDIF_WAKEUP_REC,SPDIF activity detected" "0,1" rbitfld.long 0x14 3. "CM_RX_DATA,Common mode received data" "0,1" newline rbitfld.long 0x14 2. "DIFF_RX_DATA,Differential received data" "0,1" rbitfld.long 0x14 1. "ARC_PLOCK,ARC PLOCK achieved." "0,1" bitfld.long 0x14 0. "ERR_REC,Error in data processing" "0,1" line.long 0x18 "STATUS_CLR,Status register" hexmask.long.word 0x18 16.--31. 1. "ERR_CNT,Error Count" eventfld.long 0x18 5. "POWER_STABLE,Power stable" "0,1" eventfld.long 0x18 4. "SPDIF_WAKEUP_REC,SPDIF activity detected" "0,1" eventfld.long 0x18 3. "CM_RX_DATA,Common mode received data" "0,1" newline eventfld.long 0x18 2. "DIFF_RX_DATA,Differential received data" "0,1" eventfld.long 0x18 1. "ARC_PLOCK,ARC PLOCK achieved." "0,1" eventfld.long 0x18 0. "ERR_REC,Error in data processing" "0,1" line.long 0x1C "STATUS_TOG,Status register" hexmask.long.word 0x1C 16.--31. 1. "ERR_CNT,Error Count" rbitfld.long 0x1C 5. "POWER_STABLE,Power stable" "0,1" bitfld.long 0x1C 4. "SPDIF_WAKEUP_REC,SPDIF activity detected" "0,1" rbitfld.long 0x1C 3. "CM_RX_DATA,Common mode received data" "0,1" newline rbitfld.long 0x1C 2. "DIFF_RX_DATA,Differential received data" "0,1" rbitfld.long 0x1C 1. "ARC_PLOCK,ARC PLOCK achieved." "0,1" bitfld.long 0x1C 0. "ERR_REC,Error in data processing" "0,1" line.long 0x20 "ANALOG_TRIM,Analog Trim." bitfld.long 0x20 31. "TERM_CALIB_EN,Termination trim calibration enable." "0,1" bitfld.long 0x20 30. "IREF_CALIB_EN,IREF trim calibration enable." "0,1" bitfld.long 0x20 27.--29. "TX_PRE_EMPH,Trim bits." "0,1,2,3,4,5,6,7" bitfld.long 0x20 24.--26. "RX_LVL_SEL,DC Level of RX common mode" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x20 16.--23. 1. "RX_CM_VREF_TRIM,Trim bits for common mode receiver Vref termination." hexmask.long.byte 0x20 8.--15. 1. "TERM_TRIM,Trim bits for termination." hexmask.long.byte 0x20 0.--7. 1. "IREF_TRIM,Trim bits for TX bias current." line.long 0x24 "ANALOG_TRIM_SET,Analog Trim." bitfld.long 0x24 31. "TERM_CALIB_EN,Termination trim calibration enable." "0,1" bitfld.long 0x24 30. "IREF_CALIB_EN,IREF trim calibration enable." "0,1" bitfld.long 0x24 27.--29. "TX_PRE_EMPH,Trim bits." "0,1,2,3,4,5,6,7" bitfld.long 0x24 24.--26. "RX_LVL_SEL,DC Level of RX common mode" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x24 16.--23. 1. "RX_CM_VREF_TRIM,Trim bits for common mode receiver Vref termination." hexmask.long.byte 0x24 8.--15. 1. "TERM_TRIM,Trim bits for termination." hexmask.long.byte 0x24 0.--7. 1. "IREF_TRIM,Trim bits for TX bias current." line.long 0x28 "ANALOG_TRIM_CLR,Analog Trim." eventfld.long 0x28 31. "TERM_CALIB_EN,Termination trim calibration enable." "0,1" eventfld.long 0x28 30. "IREF_CALIB_EN,IREF trim calibration enable." "0,1" eventfld.long 0x28 27.--29. "TX_PRE_EMPH,Trim bits." "0,1,2,3,4,5,6,7" eventfld.long 0x28 24.--26. "RX_LVL_SEL,DC Level of RX common mode" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x28 16.--23. 1. "RX_CM_VREF_TRIM,Trim bits for common mode receiver Vref termination." hexmask.long.byte 0x28 8.--15. 1. "TERM_TRIM,Trim bits for termination." hexmask.long.byte 0x28 0.--7. 1. "IREF_TRIM,Trim bits for TX bias current." line.long 0x2C "ANALOG_TRIM_TOG,Analog Trim." bitfld.long 0x2C 31. "TERM_CALIB_EN,Termination trim calibration enable." "0,1" bitfld.long 0x2C 30. "IREF_CALIB_EN,IREF trim calibration enable." "0,1" bitfld.long 0x2C 27.--29. "TX_PRE_EMPH,Trim bits." "0,1,2,3,4,5,6,7" bitfld.long 0x2C 24.--26. "RX_LVL_SEL,DC Level of RX common mode" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x2C 16.--23. 1. "RX_CM_VREF_TRIM,Trim bits for common mode receiver Vref termination." hexmask.long.byte 0x2C 8.--15. 1. "TERM_TRIM,Trim bits for termination." hexmask.long.byte 0x2C 0.--7. 1. "IREF_TRIM,Trim bits for TX bias current." line.long 0x30 "SLEW_RATE_TRIM,Slew rate Trim." hexmask.long.byte 0x30 8.--11. 1. "TRACKING_VREF_TRIM,Trim bits for Common mode tracking Vref." hexmask.long.byte 0x30 4.--7. 1. "TX_DIFF_SRE,Trim bits for differential driver slew rate." hexmask.long.byte 0x30 0.--3. 1. "TX_CM_SRE,Trim bits for common mode driver slew rate." line.long 0x34 "SLEW_RATE_TRIM_SET,Slew rate Trim." hexmask.long.byte 0x34 8.--11. 1. "TRACKING_VREF_TRIM,Trim bits for Common mode tracking Vref." hexmask.long.byte 0x34 4.--7. 1. "TX_DIFF_SRE,Trim bits for differential driver slew rate." hexmask.long.byte 0x34 0.--3. 1. "TX_CM_SRE,Trim bits for common mode driver slew rate." line.long 0x38 "SLEW_RATE_TRIM_CLR,Slew rate Trim." hexmask.long.byte 0x38 8.--11. 1. "TRACKING_VREF_TRIM,Trim bits for Common mode tracking Vref." hexmask.long.byte 0x38 4.--7. 1. "TX_DIFF_SRE,Trim bits for differential driver slew rate." hexmask.long.byte 0x38 0.--3. 1. "TX_CM_SRE,Trim bits for common mode driver slew rate." line.long 0x3C "SLEW_RATE_TRIM_TOG,Slew rate Trim." hexmask.long.byte 0x3C 8.--11. 1. "TRACKING_VREF_TRIM,Trim bits for Common mode tracking Vref." hexmask.long.byte 0x3C 4.--7. 1. "TX_DIFF_SRE,Trim bits for differential driver slew rate." hexmask.long.byte 0x3C 0.--3. 1. "TX_CM_SRE,Trim bits for common mode driver slew rate." line.long 0x40 "DATA_TEST_DELAY,Data Delay in test mode" hexmask.long.byte 0x40 20.--23. 1. "RX_DIFF_HYS,RX common mode hysteresis" hexmask.long.byte 0x40 16.--19. 1. "RX_CM_HYS,Common mode receiver hysteresis" line.long 0x44 "DATA_TEST_DELAY_SET,Data Delay in test mode" hexmask.long.byte 0x44 20.--23. 1. "RX_DIFF_HYS,RX common mode hysteresis" hexmask.long.byte 0x44 16.--19. 1. "RX_CM_HYS,Common mode receiver hysteresis" line.long 0x48 "DATA_TEST_DELAY_CLR,Data Delay in test mode" hexmask.long.byte 0x48 20.--23. 1. "RX_DIFF_HYS,RX common mode hysteresis" hexmask.long.byte 0x48 16.--19. 1. "RX_CM_HYS,Common mode receiver hysteresis" line.long 0x4C "DATA_TEST_DELAY_TOG,Data Delay in test mode" hexmask.long.byte 0x4C 20.--23. 1. "RX_DIFF_HYS,RX common mode hysteresis" hexmask.long.byte 0x4C 16.--19. 1. "RX_CM_HYS,Common mode receiver hysteresis" line.long 0x50 "TEST_CTRL,Test control" hexmask.long.byte 0x50 24.--27. 1. "TEST_OUT1_SEL,Mux select for test_out[1]." hexmask.long.byte 0x50 20.--23. 1. "TEST_OUT0_SEL,Mux select for test_out[0]." bitfld.long 0x50 15. "TEST_MODE_DIFF_EN,Differential mode test enable" "0,1" bitfld.long 0x50 14. "TEST_MODE_CM_EN,Common mode test enable" "0,1" newline bitfld.long 0x50 13. "TEST_PLL_CLK_DIFF_EN,Output clock to differential driver enable" "0,1" bitfld.long 0x50 12. "TEST_PLL_CLK_CM_EN,Output clock to common mode driver enable" "0,1" hexmask.long.byte 0x50 8.--11. 1. "TEST_CLK_SEL,Test clock select." hexmask.long.byte 0x50 0.--7. 1. "TEST_DC,Test control bits to select parametric tests" line.long 0x54 "TEST_CTRL_SET,Test control" hexmask.long.byte 0x54 24.--27. 1. "TEST_OUT1_SEL,Mux select for test_out[1]." hexmask.long.byte 0x54 20.--23. 1. "TEST_OUT0_SEL,Mux select for test_out[0]." bitfld.long 0x54 15. "TEST_MODE_DIFF_EN,Differential mode test enable" "0,1" bitfld.long 0x54 14. "TEST_MODE_CM_EN,Common mode test enable" "0,1" newline bitfld.long 0x54 13. "TEST_PLL_CLK_DIFF_EN,Output clock to differential driver enable" "0,1" bitfld.long 0x54 12. "TEST_PLL_CLK_CM_EN,Output clock to common mode driver enable" "0,1" hexmask.long.byte 0x54 8.--11. 1. "TEST_CLK_SEL,Test clock select." hexmask.long.byte 0x54 0.--7. 1. "TEST_DC,Test control bits to select parametric tests" line.long 0x58 "TEST_CTRL_CLR,Test control" hexmask.long.byte 0x58 24.--27. 1. "TEST_OUT1_SEL,Mux select for test_out[1]." hexmask.long.byte 0x58 20.--23. 1. "TEST_OUT0_SEL,Mux select for test_out[0]." eventfld.long 0x58 15. "TEST_MODE_DIFF_EN,Differential mode test enable" "0,1" eventfld.long 0x58 14. "TEST_MODE_CM_EN,Common mode test enable" "0,1" newline eventfld.long 0x58 13. "TEST_PLL_CLK_DIFF_EN,Output clock to differential driver enable" "0,1" eventfld.long 0x58 12. "TEST_PLL_CLK_CM_EN,Output clock to common mode driver enable" "0,1" hexmask.long.byte 0x58 8.--11. 1. "TEST_CLK_SEL,Test clock select." hexmask.long.byte 0x58 0.--7. 1. "TEST_DC,Test control bits to select parametric tests" line.long 0x5C "TEST_CTRL_TOG,Test control" hexmask.long.byte 0x5C 24.--27. 1. "TEST_OUT1_SEL,Mux select for test_out[1]." hexmask.long.byte 0x5C 20.--23. 1. "TEST_OUT0_SEL,Mux select for test_out[0]." bitfld.long 0x5C 15. "TEST_MODE_DIFF_EN,Differential mode test enable" "0,1" bitfld.long 0x5C 14. "TEST_MODE_CM_EN,Common mode test enable" "0,1" newline bitfld.long 0x5C 13. "TEST_PLL_CLK_DIFF_EN,Output clock to differential driver enable" "0,1" bitfld.long 0x5C 12. "TEST_PLL_CLK_CM_EN,Output clock to common mode driver enable" "0,1" hexmask.long.byte 0x5C 8.--11. 1. "TEST_CLK_SEL,Test clock select." hexmask.long.byte 0x5C 0.--7. 1. "TEST_DC,Test control bits to select parametric tests" group.long 0x70++0x23 line.long 0x0 "CTRL2,Control Register 2" bitfld.long 0x0 29.--31. "SPDIF_TGL_CNT,SPDIF wakeup source toggle count." "0,1,2,3,4,5,6,7" bitfld.long 0x0 14. "EARC_TX_MODE,Indicates eARC TX mode." "0,1" hexmask.long.word 0x0 0.--13. 1. "RFU,RFU" line.long 0x4 "CTRL2_SET,Control Register 2" bitfld.long 0x4 29.--31. "SPDIF_TGL_CNT,SPDIF wakeup source toggle count." "0,1,2,3,4,5,6,7" bitfld.long 0x4 14. "EARC_TX_MODE,Indicates eARC TX mode." "0,1" hexmask.long.word 0x4 0.--13. 1. "RFU,RFU" line.long 0x8 "CTRL2_CLR,Control Register 2" eventfld.long 0x8 29.--31. "SPDIF_TGL_CNT,SPDIF wakeup source toggle count." "0,1,2,3,4,5,6,7" eventfld.long 0x8 14. "EARC_TX_MODE,Indicates eARC TX mode." "0,1" hexmask.long.word 0x8 0.--13. 1. "RFU,RFU" line.long 0xC "CTRL2_TOG,Control Register 2" bitfld.long 0xC 29.--31. "SPDIF_TGL_CNT,SPDIF wakeup source toggle count." "0,1,2,3,4,5,6,7" bitfld.long 0xC 14. "EARC_TX_MODE,Indicates eARC TX mode." "0,1" hexmask.long.word 0xC 0.--13. 1. "RFU,RFU" line.long 0x10 "PLL_FREQ_CHECK_CTRL,Control Register for measuring the PLL frequency." bitfld.long 0x10 31. "EN_CLK0,Enable for measuring clock 0 for number of reference clocks programmed in NUM_REF_CLKS" "0,1" hexmask.long.word 0x10 0.--13. 1. "NUM_REF_CLKS,Number of Reference clocks." line.long 0x14 "PLL_FREQ_CHECK_CTRL_SET,Control Register for measuring the PLL frequency." bitfld.long 0x14 31. "EN_CLK0,Enable for measuring clock 0 for number of reference clocks programmed in NUM_REF_CLKS" "0,1" hexmask.long.word 0x14 0.--13. 1. "NUM_REF_CLKS,Number of Reference clocks." line.long 0x18 "PLL_FREQ_CHECK_CTRL_CLR,Control Register for measuring the PLL frequency." eventfld.long 0x18 31. "EN_CLK0,Enable for measuring clock 0 for number of reference clocks programmed in NUM_REF_CLKS" "0,1" hexmask.long.word 0x18 0.--13. 1. "NUM_REF_CLKS,Number of Reference clocks." line.long 0x1C "PLL_FREQ_CHECK_CTRL_TOG,Control Register for measuring the PLL frequency." bitfld.long 0x1C 31. "EN_CLK0,Enable for measuring clock 0 for number of reference clocks programmed in NUM_REF_CLKS" "0,1" hexmask.long.word 0x1C 0.--13. 1. "NUM_REF_CLKS,Number of Reference clocks." line.long 0x20 "CLK0_FREQ,Control Register for measuring the PLL frequency." bitfld.long 0x20 31. "CLR_CNT,Clear counter." "0,1" hexmask.long.tbyte 0x20 0.--19. 1. "CNT,Clock 0 count." tree.end tree "WAKEUP_EDMA5_MP" tree "MP2" base ad:0x42000000 group.long 0x0++0x3 line.long 0x0 "MP_CSR,Management Page Control Register" rbitfld.long 0x0 31. "ACTIVE,DMA Active Status" "0: eDMA is idle.,1: eDMA is executing a channel." hexmask.long.byte 0x0 24.--29. 1. "ACTIVE_ID,Active channel ID" newline hexmask.long.byte 0x0 16.--23. 1. "VER,eDMA version" bitfld.long 0x0 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication is disabled for all..,1: Master ID replication is available and is.." newline bitfld.long 0x0 6. "GCLC,Global Channel Linking Control" "0: Channel linking is disabled for all channels.,1: Channel linking is available and controlled by.." bitfld.long 0x0 5. "HALT,Halt DMA Operations" "0: Normal operation,1: Stall the start of any new channels. Executing.." newline bitfld.long 0x0 4. "HAE,Halt After Error" "0: Normal operation,1: Any error causes the HALT bit to set." bitfld.long 0x0 3. "GCPC,Global Channel Preemption Control" "0: Preemption is disabled for all channels.,1: Preemption is available." newline bitfld.long 0x0 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round robin channel arbitration is disabled.,1: Round robin channel arbitration is enabled." bitfld.long 0x0 1. "EDBG,Enable Debug" "0: Debug mode is disabled.,1: Debug mode is enabled." rgroup.long 0x4++0x13 line.long 0x0 "MP_ES,Management Page Error Status Register" bitfld.long 0x0 31. "VLD,Valid" "0: No ERR bits are set.,1: At least one ERR bit is set indicating a valid.." hexmask.long.byte 0x0 24.--29. 1. "ERRCHN,Error Channel Number or Canceled Channel Number" newline bitfld.long 0x0 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." bitfld.long 0x0 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." newline bitfld.long 0x0 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." bitfld.long 0x0 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." bitfld.long 0x0 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to zero.." bitfld.long 0x0 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." bitfld.long 0x0 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x4 "MP_INT_LOW,Management Page Interrupt Request Status Register" hexmask.long 0x4 0.--31. 1. "INT,Interrupt Request Status" line.long 0x8 "MP_INT_HIGH,Management Page Interrupt Request Status Register" hexmask.long 0x8 0.--31. 1. "INT,Interrupt Request Status" line.long 0xC "MP_HRS_LOW,Hardware Request Status Register" hexmask.long 0xC 0.--31. 1. "HRS,Hardware Request Status" line.long 0x10 "MP_HRS_HIGH,Hardware Request Status Register" hexmask.long 0x10 0.--31. 1. "HRS,Hardware Request Status" group.long 0x20++0x3 line.long 0x0 "MP_STOPCH,Stop Channel Register" bitfld.long 0x0 7. "ERR,Stop channel with error exit" "0: Stop channel without error reporting,1: Stop channel with error reporting" hexmask.long.byte 0x0 0.--5. 1. "STOPCH,Stop Channel" rgroup.long 0x30++0x7 line.long 0x0 "MP_SSR_LOW,Stop Status Register" hexmask.long 0x0 0.--31. 1. "CSS,Channel Stop Status" line.long 0x4 "MP_SSR_HIGH,Stop Status Register" hexmask.long 0x4 0.--31. 1. "CSS,Channel Stop Status" group.long 0x40++0x7 line.long 0x0 "MP_VPAS_LOW,Virtual/Physical Address Select Register" hexmask.long 0x0 0.--31. 1. "EVA,Enable Virtual Addressing" line.long 0x4 "MP_VPAS_HIGH,Virtual/Physical Address Select Register" hexmask.long 0x4 0.--31. 1. "EVA,Enable Virtual Addressing" repeat 64. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CH_GRPRI[$1],Channel Arbitration Group Register" hexmask.long.byte 0x0 0.--5. 1. "GRPRI,Arbitration group per channel." repeat.end repeat 64. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "CH_MUX[$1],Channel Multiplexor Configuration" hexmask.long.byte 0x0 0.--6. 1. "SRC,Service Request Source" repeat.end repeat 64. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x400)++0x3 line.long 0x0 "CH_PROT[$1],Channel Protection Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--4. 1. "MID,Master ID" repeat.end tree.end tree "MP3" base ad:0x42210000 group.long 0x0++0x3 line.long 0x0 "MP_CSR,Management Page Control Register" rbitfld.long 0x0 31. "ACTIVE,DMA Active Status" "0: eDMA is idle.,1: eDMA is executing a channel." hexmask.long.byte 0x0 24.--29. 1. "ACTIVE_ID,Active channel ID" newline hexmask.long.byte 0x0 16.--23. 1. "VER,eDMA version" bitfld.long 0x0 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication is disabled for all..,1: Master ID replication is available and is.." newline bitfld.long 0x0 6. "GCLC,Global Channel Linking Control" "0: Channel linking is disabled for all channels.,1: Channel linking is available and controlled by.." bitfld.long 0x0 5. "HALT,Halt DMA Operations" "0: Normal operation,1: Stall the start of any new channels. Executing.." newline bitfld.long 0x0 4. "HAE,Halt After Error" "0: Normal operation,1: Any error causes the HALT bit to set." bitfld.long 0x0 3. "GCPC,Global Channel Preemption Control" "0: Preemption is disabled for all channels.,1: Preemption is available." newline bitfld.long 0x0 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round robin channel arbitration is disabled.,1: Round robin channel arbitration is enabled." bitfld.long 0x0 1. "EDBG,Enable Debug" "0: Debug mode is disabled.,1: Debug mode is enabled." rgroup.long 0x4++0x13 line.long 0x0 "MP_ES,Management Page Error Status Register" bitfld.long 0x0 31. "VLD,Valid" "0: No ERR bits are set.,1: At least one ERR bit is set indicating a valid.." hexmask.long.byte 0x0 24.--29. 1. "ERRCHN,Error Channel Number or Canceled Channel Number" newline bitfld.long 0x0 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." bitfld.long 0x0 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." newline bitfld.long 0x0 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." bitfld.long 0x0 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." bitfld.long 0x0 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to zero.." bitfld.long 0x0 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." newline bitfld.long 0x0 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." bitfld.long 0x0 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x4 "MP_INT_LOW,Management Page Interrupt Request Status Register" hexmask.long 0x4 0.--31. 1. "INT,Interrupt Request Status" line.long 0x8 "MP_INT_HIGH,Management Page Interrupt Request Status Register" hexmask.long 0x8 0.--31. 1. "INT,Interrupt Request Status" line.long 0xC "MP_HRS_LOW,Hardware Request Status Register" hexmask.long 0xC 0.--31. 1. "HRS,Hardware Request Status" line.long 0x10 "MP_HRS_HIGH,Hardware Request Status Register" hexmask.long 0x10 0.--31. 1. "HRS,Hardware Request Status" group.long 0x20++0x3 line.long 0x0 "MP_STOPCH,Stop Channel Register" bitfld.long 0x0 7. "ERR,Stop channel with error exit" "0: Stop channel without error reporting,1: Stop channel with error reporting" hexmask.long.byte 0x0 0.--5. 1. "STOPCH,Stop Channel" rgroup.long 0x30++0x7 line.long 0x0 "MP_SSR_LOW,Stop Status Register" hexmask.long 0x0 0.--31. 1. "CSS,Channel Stop Status" line.long 0x4 "MP_SSR_HIGH,Stop Status Register" hexmask.long 0x4 0.--31. 1. "CSS,Channel Stop Status" group.long 0x40++0x7 line.long 0x0 "MP_VPAS_LOW,Virtual/Physical Address Select Register" hexmask.long 0x0 0.--31. 1. "EVA,Enable Virtual Addressing" line.long 0x4 "MP_VPAS_HIGH,Virtual/Physical Address Select Register" hexmask.long 0x4 0.--31. 1. "EVA,Enable Virtual Addressing" repeat 64. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "CH_GRPRI[$1],Channel Arbitration Group Register" hexmask.long.byte 0x0 0.--5. 1. "GRPRI,Arbitration group per channel." repeat.end repeat 64. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "CH_MUX[$1],Channel Multiplexor Configuration" hexmask.long.byte 0x0 0.--6. 1. "SRC,Service Request Source" repeat.end repeat 64. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x400)++0x3 line.long 0x0 "CH_PROT[$1],Channel Protection Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" repeat.end tree.end tree.end tree "WAKEUP_EDMA5_TCD" tree "MP2" base ad:0x42010000 group.long 0x0++0x13 line.long 0x0 "CH0_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH0_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH0_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH0_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH0_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x18++0x3 line.long 0x0 "CH0_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x20++0x7 line.long 0x0 "TCD0_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD0_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x28++0x3 line.word 0x0 "TCD0_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD0_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2C++0x3 line.long 0x0 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2C++0x1B line.long 0x0 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD0_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD0_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD0_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD0_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x48++0x3 line.word 0x0 "TCD0_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4A++0x5 line.word 0x0 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD0_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4E++0x1 line.word 0x0 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x8000++0x13 line.long 0x0 "CH1_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH1_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH1_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH1_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH1_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x8018++0x3 line.long 0x0 "CH1_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x8020++0x7 line.long 0x0 "TCD1_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD1_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x8028++0x3 line.word 0x0 "TCD1_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD1_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x802C++0x3 line.long 0x0 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x802C++0x1B line.long 0x0 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD1_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD1_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD1_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD1_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x8048++0x3 line.word 0x0 "TCD1_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x804A++0x5 line.word 0x0 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD1_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x804E++0x1 line.word 0x0 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x10000++0x13 line.long 0x0 "CH2_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH2_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH2_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH2_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH2_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10018++0x3 line.long 0x0 "CH2_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x10020++0x7 line.long 0x0 "TCD2_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD2_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x10028++0x3 line.word 0x0 "TCD2_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD2_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1002C++0x3 line.long 0x0 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1002C++0x1B line.long 0x0 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD2_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD2_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD2_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD2_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x10048++0x3 line.word 0x0 "TCD2_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1004A++0x5 line.word 0x0 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD2_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1004E++0x1 line.word 0x0 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x18000++0x13 line.long 0x0 "CH3_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH3_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH3_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH3_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH3_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x18018++0x3 line.long 0x0 "CH3_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x18020++0x7 line.long 0x0 "TCD3_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD3_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x18028++0x3 line.word 0x0 "TCD3_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD3_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1802C++0x3 line.long 0x0 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1802C++0x1B line.long 0x0 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD3_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD3_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD3_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD3_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x18048++0x3 line.word 0x0 "TCD3_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1804A++0x5 line.word 0x0 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD3_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1804E++0x1 line.word 0x0 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x20000++0x13 line.long 0x0 "CH4_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH4_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH4_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH4_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH4_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20018++0x3 line.long 0x0 "CH4_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x20020++0x7 line.long 0x0 "TCD4_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD4_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x20028++0x3 line.word 0x0 "TCD4_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD4_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2002C++0x3 line.long 0x0 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2002C++0x1B line.long 0x0 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD4_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD4_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD4_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD4_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x20048++0x3 line.word 0x0 "TCD4_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x2004A++0x5 line.word 0x0 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD4_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2004E++0x1 line.word 0x0 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x28000++0x13 line.long 0x0 "CH5_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH5_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH5_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH5_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH5_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x28018++0x3 line.long 0x0 "CH5_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x28020++0x7 line.long 0x0 "TCD5_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD5_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x28028++0x3 line.word 0x0 "TCD5_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD5_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2802C++0x3 line.long 0x0 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2802C++0x1B line.long 0x0 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD5_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD5_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD5_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD5_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x28048++0x3 line.word 0x0 "TCD5_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x2804A++0x5 line.word 0x0 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD5_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2804E++0x1 line.word 0x0 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x30000++0x13 line.long 0x0 "CH6_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH6_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH6_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH6_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH6_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x30018++0x3 line.long 0x0 "CH6_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x30020++0x7 line.long 0x0 "TCD6_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD6_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x30028++0x3 line.word 0x0 "TCD6_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD6_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x3002C++0x3 line.long 0x0 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x3002C++0x1B line.long 0x0 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD6_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD6_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD6_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD6_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x30048++0x3 line.word 0x0 "TCD6_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x3004A++0x5 line.word 0x0 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD6_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3004E++0x1 line.word 0x0 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x38000++0x13 line.long 0x0 "CH7_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH7_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH7_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH7_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH7_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x38018++0x3 line.long 0x0 "CH7_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x38020++0x7 line.long 0x0 "TCD7_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD7_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x38028++0x3 line.word 0x0 "TCD7_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD7_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x3802C++0x3 line.long 0x0 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x3802C++0x1B line.long 0x0 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD7_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD7_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD7_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD7_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x38048++0x3 line.word 0x0 "TCD7_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x3804A++0x5 line.word 0x0 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD7_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3804E++0x1 line.word 0x0 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x40000++0x13 line.long 0x0 "CH8_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH8_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH8_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH8_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH8_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x40018++0x3 line.long 0x0 "CH8_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x40020++0x7 line.long 0x0 "TCD8_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD8_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x40028++0x3 line.word 0x0 "TCD8_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD8_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x4002C++0x3 line.long 0x0 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x4002C++0x1B line.long 0x0 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD8_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD8_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD8_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD8_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x40048++0x3 line.word 0x0 "TCD8_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4004A++0x5 line.word 0x0 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD8_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4004E++0x1 line.word 0x0 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x48000++0x13 line.long 0x0 "CH9_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH9_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH9_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH9_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH9_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x48018++0x3 line.long 0x0 "CH9_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x48020++0x7 line.long 0x0 "TCD9_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD9_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x48028++0x3 line.word 0x0 "TCD9_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD9_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x4802C++0x3 line.long 0x0 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x4802C++0x1B line.long 0x0 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD9_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD9_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD9_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD9_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x48048++0x3 line.word 0x0 "TCD9_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4804A++0x5 line.word 0x0 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD9_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4804E++0x1 line.word 0x0 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x50000++0x13 line.long 0x0 "CH10_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH10_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH10_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH10_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH10_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x50018++0x3 line.long 0x0 "CH10_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x50020++0x7 line.long 0x0 "TCD10_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD10_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x50028++0x3 line.word 0x0 "TCD10_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD10_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x5002C++0x3 line.long 0x0 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x5002C++0x1B line.long 0x0 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD10_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD10_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD10_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD10_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x50048++0x3 line.word 0x0 "TCD10_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x5004A++0x5 line.word 0x0 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD10_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5004E++0x1 line.word 0x0 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x58000++0x13 line.long 0x0 "CH11_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH11_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH11_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH11_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH11_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x58018++0x3 line.long 0x0 "CH11_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x58020++0x7 line.long 0x0 "TCD11_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD11_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x58028++0x3 line.word 0x0 "TCD11_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD11_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x5802C++0x3 line.long 0x0 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x5802C++0x1B line.long 0x0 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD11_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD11_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD11_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD11_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x58048++0x3 line.word 0x0 "TCD11_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x5804A++0x5 line.word 0x0 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD11_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5804E++0x1 line.word 0x0 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x60000++0x13 line.long 0x0 "CH12_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH12_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH12_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH12_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH12_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x60018++0x3 line.long 0x0 "CH12_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x60020++0x7 line.long 0x0 "TCD12_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD12_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x60028++0x3 line.word 0x0 "TCD12_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD12_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x6002C++0x3 line.long 0x0 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x6002C++0x1B line.long 0x0 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD12_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD12_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD12_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD12_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x60048++0x3 line.word 0x0 "TCD12_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x6004A++0x5 line.word 0x0 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD12_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6004E++0x1 line.word 0x0 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x68000++0x13 line.long 0x0 "CH13_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH13_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH13_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH13_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH13_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x68018++0x3 line.long 0x0 "CH13_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x68020++0x7 line.long 0x0 "TCD13_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD13_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x68028++0x3 line.word 0x0 "TCD13_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD13_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x6802C++0x3 line.long 0x0 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x6802C++0x1B line.long 0x0 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD13_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD13_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD13_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD13_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x68048++0x3 line.word 0x0 "TCD13_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x6804A++0x5 line.word 0x0 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD13_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6804E++0x1 line.word 0x0 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x70000++0x13 line.long 0x0 "CH14_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH14_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH14_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH14_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH14_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x70018++0x3 line.long 0x0 "CH14_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x70020++0x7 line.long 0x0 "TCD14_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD14_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x70028++0x3 line.word 0x0 "TCD14_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD14_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x7002C++0x3 line.long 0x0 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x7002C++0x1B line.long 0x0 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD14_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD14_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD14_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD14_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x70048++0x3 line.word 0x0 "TCD14_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x7004A++0x5 line.word 0x0 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD14_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7004E++0x1 line.word 0x0 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x78000++0x13 line.long 0x0 "CH15_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH15_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH15_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH15_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH15_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x78018++0x3 line.long 0x0 "CH15_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x78020++0x7 line.long 0x0 "TCD15_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD15_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x78028++0x3 line.word 0x0 "TCD15_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD15_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x7802C++0x3 line.long 0x0 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x7802C++0x1B line.long 0x0 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD15_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD15_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD15_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD15_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x78048++0x3 line.word 0x0 "TCD15_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x7804A++0x5 line.word 0x0 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD15_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7804E++0x1 line.word 0x0 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x80000++0x13 line.long 0x0 "CH16_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH16_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH16_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH16_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH16_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x80018++0x3 line.long 0x0 "CH16_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x80020++0x7 line.long 0x0 "TCD16_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD16_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x80028++0x3 line.word 0x0 "TCD16_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD16_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x8002C++0x3 line.long 0x0 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x8002C++0x1B line.long 0x0 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD16_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD16_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD16_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD16_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x80048++0x3 line.word 0x0 "TCD16_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x8004A++0x5 line.word 0x0 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD16_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8004E++0x1 line.word 0x0 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x88000++0x13 line.long 0x0 "CH17_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH17_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH17_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH17_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH17_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x88018++0x3 line.long 0x0 "CH17_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x88020++0x7 line.long 0x0 "TCD17_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD17_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x88028++0x3 line.word 0x0 "TCD17_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD17_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x8802C++0x3 line.long 0x0 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x8802C++0x1B line.long 0x0 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD17_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD17_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD17_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD17_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x88048++0x3 line.word 0x0 "TCD17_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x8804A++0x5 line.word 0x0 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD17_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8804E++0x1 line.word 0x0 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x90000++0x13 line.long 0x0 "CH18_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH18_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH18_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH18_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH18_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x90018++0x3 line.long 0x0 "CH18_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x90020++0x7 line.long 0x0 "TCD18_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD18_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x90028++0x3 line.word 0x0 "TCD18_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD18_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x9002C++0x3 line.long 0x0 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x9002C++0x1B line.long 0x0 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD18_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD18_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD18_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD18_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x90048++0x3 line.word 0x0 "TCD18_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x9004A++0x5 line.word 0x0 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD18_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9004E++0x1 line.word 0x0 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x98000++0x13 line.long 0x0 "CH19_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH19_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH19_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH19_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH19_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x98018++0x3 line.long 0x0 "CH19_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x98020++0x7 line.long 0x0 "TCD19_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD19_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x98028++0x3 line.word 0x0 "TCD19_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD19_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x9802C++0x3 line.long 0x0 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x9802C++0x1B line.long 0x0 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD19_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD19_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD19_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD19_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x98048++0x3 line.word 0x0 "TCD19_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x9804A++0x5 line.word 0x0 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD19_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9804E++0x1 line.word 0x0 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xA0000++0x13 line.long 0x0 "CH20_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH20_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH20_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH20_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH20_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA0018++0x3 line.long 0x0 "CH20_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xA0020++0x7 line.long 0x0 "TCD20_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD20_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xA0028++0x3 line.word 0x0 "TCD20_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD20_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xA002C++0x3 line.long 0x0 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xA002C++0x1B line.long 0x0 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD20_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD20_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD20_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD20_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xA0048++0x3 line.word 0x0 "TCD20_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA004A++0x5 line.word 0x0 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD20_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA004E++0x1 line.word 0x0 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xA8000++0x13 line.long 0x0 "CH21_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH21_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH21_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH21_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH21_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA8018++0x3 line.long 0x0 "CH21_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xA8020++0x7 line.long 0x0 "TCD21_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD21_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xA8028++0x3 line.word 0x0 "TCD21_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD21_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xA802C++0x3 line.long 0x0 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xA802C++0x1B line.long 0x0 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD21_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD21_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD21_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD21_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xA8048++0x3 line.word 0x0 "TCD21_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA804A++0x5 line.word 0x0 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD21_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA804E++0x1 line.word 0x0 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xB0000++0x13 line.long 0x0 "CH22_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH22_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH22_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH22_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH22_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB0018++0x3 line.long 0x0 "CH22_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xB0020++0x7 line.long 0x0 "TCD22_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD22_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xB0028++0x3 line.word 0x0 "TCD22_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD22_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xB002C++0x3 line.long 0x0 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xB002C++0x1B line.long 0x0 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD22_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD22_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD22_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD22_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xB0048++0x3 line.word 0x0 "TCD22_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB004A++0x5 line.word 0x0 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD22_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB004E++0x1 line.word 0x0 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xB8000++0x13 line.long 0x0 "CH23_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH23_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH23_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH23_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH23_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB8018++0x3 line.long 0x0 "CH23_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xB8020++0x7 line.long 0x0 "TCD23_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD23_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xB8028++0x3 line.word 0x0 "TCD23_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD23_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xB802C++0x3 line.long 0x0 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xB802C++0x1B line.long 0x0 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD23_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD23_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD23_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD23_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xB8048++0x3 line.word 0x0 "TCD23_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB804A++0x5 line.word 0x0 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD23_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB804E++0x1 line.word 0x0 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xC0000++0x13 line.long 0x0 "CH24_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH24_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH24_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH24_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH24_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC0018++0x3 line.long 0x0 "CH24_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xC0020++0x7 line.long 0x0 "TCD24_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD24_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xC0028++0x3 line.word 0x0 "TCD24_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD24_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xC002C++0x3 line.long 0x0 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xC002C++0x1B line.long 0x0 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD24_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD24_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD24_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD24_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xC0048++0x3 line.word 0x0 "TCD24_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC004A++0x5 line.word 0x0 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD24_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC004E++0x1 line.word 0x0 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xC8000++0x13 line.long 0x0 "CH25_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH25_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH25_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH25_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH25_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC8018++0x3 line.long 0x0 "CH25_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xC8020++0x7 line.long 0x0 "TCD25_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD25_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xC8028++0x3 line.word 0x0 "TCD25_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD25_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xC802C++0x3 line.long 0x0 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xC802C++0x1B line.long 0x0 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD25_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD25_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD25_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD25_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xC8048++0x3 line.word 0x0 "TCD25_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC804A++0x5 line.word 0x0 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD25_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC804E++0x1 line.word 0x0 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xD0000++0x13 line.long 0x0 "CH26_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH26_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH26_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH26_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH26_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD0018++0x3 line.long 0x0 "CH26_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xD0020++0x7 line.long 0x0 "TCD26_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD26_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xD0028++0x3 line.word 0x0 "TCD26_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD26_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xD002C++0x3 line.long 0x0 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xD002C++0x1B line.long 0x0 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD26_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD26_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD26_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD26_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xD0048++0x3 line.word 0x0 "TCD26_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD004A++0x5 line.word 0x0 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD26_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD004E++0x1 line.word 0x0 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xD8000++0x13 line.long 0x0 "CH27_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH27_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH27_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH27_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH27_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD8018++0x3 line.long 0x0 "CH27_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xD8020++0x7 line.long 0x0 "TCD27_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD27_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xD8028++0x3 line.word 0x0 "TCD27_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD27_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xD802C++0x3 line.long 0x0 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xD802C++0x1B line.long 0x0 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD27_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD27_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD27_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD27_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xD8048++0x3 line.word 0x0 "TCD27_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD804A++0x5 line.word 0x0 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD27_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD804E++0x1 line.word 0x0 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xE0000++0x13 line.long 0x0 "CH28_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH28_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH28_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH28_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH28_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE0018++0x3 line.long 0x0 "CH28_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xE0020++0x7 line.long 0x0 "TCD28_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD28_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xE0028++0x3 line.word 0x0 "TCD28_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD28_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xE002C++0x3 line.long 0x0 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xE002C++0x1B line.long 0x0 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD28_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD28_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD28_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD28_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xE0048++0x3 line.word 0x0 "TCD28_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE004A++0x5 line.word 0x0 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD28_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE004E++0x1 line.word 0x0 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xE8000++0x13 line.long 0x0 "CH29_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH29_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH29_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH29_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH29_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE8018++0x3 line.long 0x0 "CH29_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xE8020++0x7 line.long 0x0 "TCD29_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD29_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xE8028++0x3 line.word 0x0 "TCD29_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD29_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xE802C++0x3 line.long 0x0 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xE802C++0x1B line.long 0x0 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD29_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD29_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD29_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD29_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xE8048++0x3 line.word 0x0 "TCD29_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE804A++0x5 line.word 0x0 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD29_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE804E++0x1 line.word 0x0 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xF0000++0x13 line.long 0x0 "CH30_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH30_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH30_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH30_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH30_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF0018++0x3 line.long 0x0 "CH30_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xF0020++0x7 line.long 0x0 "TCD30_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD30_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xF0028++0x3 line.word 0x0 "TCD30_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD30_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xF002C++0x3 line.long 0x0 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xF002C++0x1B line.long 0x0 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD30_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD30_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD30_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD30_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xF0048++0x3 line.word 0x0 "TCD30_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF004A++0x5 line.word 0x0 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD30_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF004E++0x1 line.word 0x0 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xF8000++0x13 line.long 0x0 "CH31_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH31_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH31_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH31_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH31_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF8018++0x3 line.long 0x0 "CH31_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xF8020++0x7 line.long 0x0 "TCD31_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD31_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xF8028++0x3 line.word 0x0 "TCD31_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD31_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xF802C++0x3 line.long 0x0 "TCD31_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xF802C++0x1B line.long 0x0 "TCD31_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD31_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD31_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD31_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD31_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD31_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD31_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xF8048++0x3 line.word 0x0 "TCD31_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD31_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF804A++0x5 line.word 0x0 "TCD31_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD31_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD31_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF804E++0x1 line.word 0x0 "TCD31_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x100000++0x13 line.long 0x0 "CH32_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH32_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH32_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH32_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH32_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x100018++0x3 line.long 0x0 "CH32_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x100020++0x7 line.long 0x0 "TCD32_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD32_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x100028++0x3 line.word 0x0 "TCD32_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD32_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x10002C++0x3 line.long 0x0 "TCD32_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x10002C++0x1B line.long 0x0 "TCD32_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD32_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD32_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD32_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD32_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD32_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD32_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x100048++0x3 line.word 0x0 "TCD32_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD32_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10004A++0x5 line.word 0x0 "TCD32_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD32_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD32_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10004E++0x1 line.word 0x0 "TCD32_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x108000++0x13 line.long 0x0 "CH33_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH33_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH33_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH33_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH33_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x108018++0x3 line.long 0x0 "CH33_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x108020++0x7 line.long 0x0 "TCD33_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD33_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x108028++0x3 line.word 0x0 "TCD33_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD33_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x10802C++0x3 line.long 0x0 "TCD33_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x10802C++0x1B line.long 0x0 "TCD33_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD33_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD33_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD33_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD33_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD33_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD33_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x108048++0x3 line.word 0x0 "TCD33_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD33_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10804A++0x5 line.word 0x0 "TCD33_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD33_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD33_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10804E++0x1 line.word 0x0 "TCD33_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x110000++0x13 line.long 0x0 "CH34_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH34_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH34_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH34_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH34_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x110018++0x3 line.long 0x0 "CH34_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x110020++0x7 line.long 0x0 "TCD34_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD34_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x110028++0x3 line.word 0x0 "TCD34_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD34_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x11002C++0x3 line.long 0x0 "TCD34_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x11002C++0x1B line.long 0x0 "TCD34_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD34_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD34_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD34_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD34_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD34_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD34_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x110048++0x3 line.word 0x0 "TCD34_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD34_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x11004A++0x5 line.word 0x0 "TCD34_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD34_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD34_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11004E++0x1 line.word 0x0 "TCD34_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x118000++0x13 line.long 0x0 "CH35_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH35_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH35_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH35_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH35_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x118018++0x3 line.long 0x0 "CH35_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x118020++0x7 line.long 0x0 "TCD35_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD35_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x118028++0x3 line.word 0x0 "TCD35_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD35_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x11802C++0x3 line.long 0x0 "TCD35_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x11802C++0x1B line.long 0x0 "TCD35_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD35_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD35_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD35_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD35_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD35_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD35_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x118048++0x3 line.word 0x0 "TCD35_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD35_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x11804A++0x5 line.word 0x0 "TCD35_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD35_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD35_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11804E++0x1 line.word 0x0 "TCD35_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x120000++0x13 line.long 0x0 "CH36_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH36_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH36_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH36_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH36_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x120018++0x3 line.long 0x0 "CH36_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x120020++0x7 line.long 0x0 "TCD36_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD36_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x120028++0x3 line.word 0x0 "TCD36_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD36_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x12002C++0x3 line.long 0x0 "TCD36_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x12002C++0x1B line.long 0x0 "TCD36_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD36_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD36_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD36_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD36_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD36_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD36_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x120048++0x3 line.word 0x0 "TCD36_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD36_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x12004A++0x5 line.word 0x0 "TCD36_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD36_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD36_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12004E++0x1 line.word 0x0 "TCD36_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x128000++0x13 line.long 0x0 "CH37_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH37_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH37_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH37_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH37_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x128018++0x3 line.long 0x0 "CH37_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x128020++0x7 line.long 0x0 "TCD37_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD37_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x128028++0x3 line.word 0x0 "TCD37_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD37_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x12802C++0x3 line.long 0x0 "TCD37_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x12802C++0x1B line.long 0x0 "TCD37_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD37_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD37_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD37_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD37_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD37_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD37_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x128048++0x3 line.word 0x0 "TCD37_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD37_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x12804A++0x5 line.word 0x0 "TCD37_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD37_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD37_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12804E++0x1 line.word 0x0 "TCD37_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x130000++0x13 line.long 0x0 "CH38_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH38_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH38_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH38_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH38_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x130018++0x3 line.long 0x0 "CH38_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x130020++0x7 line.long 0x0 "TCD38_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD38_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x130028++0x3 line.word 0x0 "TCD38_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD38_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x13002C++0x3 line.long 0x0 "TCD38_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x13002C++0x1B line.long 0x0 "TCD38_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD38_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD38_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD38_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD38_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD38_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD38_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x130048++0x3 line.word 0x0 "TCD38_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD38_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x13004A++0x5 line.word 0x0 "TCD38_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD38_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD38_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13004E++0x1 line.word 0x0 "TCD38_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x138000++0x13 line.long 0x0 "CH39_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH39_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH39_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH39_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH39_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x138018++0x3 line.long 0x0 "CH39_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x138020++0x7 line.long 0x0 "TCD39_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD39_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x138028++0x3 line.word 0x0 "TCD39_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD39_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x13802C++0x3 line.long 0x0 "TCD39_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x13802C++0x1B line.long 0x0 "TCD39_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD39_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD39_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD39_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD39_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD39_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD39_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x138048++0x3 line.word 0x0 "TCD39_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD39_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x13804A++0x5 line.word 0x0 "TCD39_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD39_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD39_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13804E++0x1 line.word 0x0 "TCD39_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x140000++0x13 line.long 0x0 "CH40_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH40_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH40_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH40_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH40_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x140018++0x3 line.long 0x0 "CH40_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x140020++0x7 line.long 0x0 "TCD40_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD40_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x140028++0x3 line.word 0x0 "TCD40_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD40_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x14002C++0x3 line.long 0x0 "TCD40_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x14002C++0x1B line.long 0x0 "TCD40_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD40_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD40_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD40_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD40_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD40_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD40_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x140048++0x3 line.word 0x0 "TCD40_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD40_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x14004A++0x5 line.word 0x0 "TCD40_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD40_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD40_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14004E++0x1 line.word 0x0 "TCD40_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x148000++0x13 line.long 0x0 "CH41_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH41_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH41_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH41_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH41_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x148018++0x3 line.long 0x0 "CH41_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x148020++0x7 line.long 0x0 "TCD41_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD41_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x148028++0x3 line.word 0x0 "TCD41_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD41_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x14802C++0x3 line.long 0x0 "TCD41_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x14802C++0x1B line.long 0x0 "TCD41_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD41_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD41_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD41_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD41_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD41_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD41_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x148048++0x3 line.word 0x0 "TCD41_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD41_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x14804A++0x5 line.word 0x0 "TCD41_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD41_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD41_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14804E++0x1 line.word 0x0 "TCD41_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x150000++0x13 line.long 0x0 "CH42_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH42_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH42_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH42_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH42_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x150018++0x3 line.long 0x0 "CH42_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x150020++0x7 line.long 0x0 "TCD42_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD42_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x150028++0x3 line.word 0x0 "TCD42_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD42_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x15002C++0x3 line.long 0x0 "TCD42_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x15002C++0x1B line.long 0x0 "TCD42_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD42_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD42_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD42_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD42_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD42_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD42_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x150048++0x3 line.word 0x0 "TCD42_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD42_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x15004A++0x5 line.word 0x0 "TCD42_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD42_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD42_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15004E++0x1 line.word 0x0 "TCD42_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x158000++0x13 line.long 0x0 "CH43_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH43_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH43_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH43_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH43_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x158018++0x3 line.long 0x0 "CH43_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x158020++0x7 line.long 0x0 "TCD43_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD43_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x158028++0x3 line.word 0x0 "TCD43_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD43_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x15802C++0x3 line.long 0x0 "TCD43_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x15802C++0x1B line.long 0x0 "TCD43_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD43_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD43_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD43_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD43_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD43_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD43_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x158048++0x3 line.word 0x0 "TCD43_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD43_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x15804A++0x5 line.word 0x0 "TCD43_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD43_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD43_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15804E++0x1 line.word 0x0 "TCD43_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x160000++0x13 line.long 0x0 "CH44_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH44_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH44_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH44_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH44_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x160018++0x3 line.long 0x0 "CH44_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x160020++0x7 line.long 0x0 "TCD44_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD44_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x160028++0x3 line.word 0x0 "TCD44_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD44_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x16002C++0x3 line.long 0x0 "TCD44_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x16002C++0x1B line.long 0x0 "TCD44_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD44_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD44_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD44_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD44_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD44_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD44_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x160048++0x3 line.word 0x0 "TCD44_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD44_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x16004A++0x5 line.word 0x0 "TCD44_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD44_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD44_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16004E++0x1 line.word 0x0 "TCD44_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x168000++0x13 line.long 0x0 "CH45_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH45_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH45_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH45_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH45_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x168018++0x3 line.long 0x0 "CH45_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x168020++0x7 line.long 0x0 "TCD45_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD45_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x168028++0x3 line.word 0x0 "TCD45_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD45_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x16802C++0x3 line.long 0x0 "TCD45_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x16802C++0x1B line.long 0x0 "TCD45_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD45_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD45_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD45_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD45_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD45_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD45_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x168048++0x3 line.word 0x0 "TCD45_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD45_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x16804A++0x5 line.word 0x0 "TCD45_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD45_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD45_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16804E++0x1 line.word 0x0 "TCD45_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x170000++0x13 line.long 0x0 "CH46_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH46_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH46_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH46_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH46_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x170018++0x3 line.long 0x0 "CH46_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x170020++0x7 line.long 0x0 "TCD46_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD46_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x170028++0x3 line.word 0x0 "TCD46_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD46_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x17002C++0x3 line.long 0x0 "TCD46_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x17002C++0x1B line.long 0x0 "TCD46_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD46_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD46_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD46_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD46_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD46_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD46_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x170048++0x3 line.word 0x0 "TCD46_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD46_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x17004A++0x5 line.word 0x0 "TCD46_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD46_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD46_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17004E++0x1 line.word 0x0 "TCD46_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x178000++0x13 line.long 0x0 "CH47_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH47_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH47_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH47_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH47_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x178018++0x3 line.long 0x0 "CH47_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x178020++0x7 line.long 0x0 "TCD47_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD47_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x178028++0x3 line.word 0x0 "TCD47_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD47_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x17802C++0x3 line.long 0x0 "TCD47_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x17802C++0x1B line.long 0x0 "TCD47_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD47_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD47_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD47_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD47_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD47_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD47_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x178048++0x3 line.word 0x0 "TCD47_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD47_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x17804A++0x5 line.word 0x0 "TCD47_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD47_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD47_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17804E++0x1 line.word 0x0 "TCD47_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x180000++0x13 line.long 0x0 "CH48_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH48_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH48_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH48_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH48_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x180018++0x3 line.long 0x0 "CH48_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x180020++0x7 line.long 0x0 "TCD48_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD48_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x180028++0x3 line.word 0x0 "TCD48_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD48_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x18002C++0x3 line.long 0x0 "TCD48_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x18002C++0x1B line.long 0x0 "TCD48_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD48_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD48_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD48_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD48_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD48_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD48_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x180048++0x3 line.word 0x0 "TCD48_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD48_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x18004A++0x5 line.word 0x0 "TCD48_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD48_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD48_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18004E++0x1 line.word 0x0 "TCD48_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x188000++0x13 line.long 0x0 "CH49_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH49_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH49_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH49_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH49_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x188018++0x3 line.long 0x0 "CH49_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x188020++0x7 line.long 0x0 "TCD49_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD49_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x188028++0x3 line.word 0x0 "TCD49_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD49_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x18802C++0x3 line.long 0x0 "TCD49_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x18802C++0x1B line.long 0x0 "TCD49_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD49_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD49_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD49_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD49_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD49_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD49_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x188048++0x3 line.word 0x0 "TCD49_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD49_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x18804A++0x5 line.word 0x0 "TCD49_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD49_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD49_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18804E++0x1 line.word 0x0 "TCD49_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x190000++0x13 line.long 0x0 "CH50_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH50_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH50_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH50_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH50_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x190018++0x3 line.long 0x0 "CH50_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x190020++0x7 line.long 0x0 "TCD50_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD50_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x190028++0x3 line.word 0x0 "TCD50_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD50_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x19002C++0x3 line.long 0x0 "TCD50_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x19002C++0x1B line.long 0x0 "TCD50_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD50_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD50_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD50_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD50_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD50_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD50_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x190048++0x3 line.word 0x0 "TCD50_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD50_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x19004A++0x5 line.word 0x0 "TCD50_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD50_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD50_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19004E++0x1 line.word 0x0 "TCD50_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x198000++0x13 line.long 0x0 "CH51_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH51_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH51_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH51_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH51_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x198018++0x3 line.long 0x0 "CH51_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x198020++0x7 line.long 0x0 "TCD51_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD51_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x198028++0x3 line.word 0x0 "TCD51_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD51_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x19802C++0x3 line.long 0x0 "TCD51_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x19802C++0x1B line.long 0x0 "TCD51_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD51_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD51_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD51_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD51_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD51_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD51_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x198048++0x3 line.word 0x0 "TCD51_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD51_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x19804A++0x5 line.word 0x0 "TCD51_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD51_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD51_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19804E++0x1 line.word 0x0 "TCD51_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1A0000++0x13 line.long 0x0 "CH52_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH52_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH52_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH52_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH52_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A0018++0x3 line.long 0x0 "CH52_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1A0020++0x7 line.long 0x0 "TCD52_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD52_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1A0028++0x3 line.word 0x0 "TCD52_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD52_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1A002C++0x3 line.long 0x0 "TCD52_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1A002C++0x1B line.long 0x0 "TCD52_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD52_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD52_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD52_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD52_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD52_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD52_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1A0048++0x3 line.word 0x0 "TCD52_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD52_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A004A++0x5 line.word 0x0 "TCD52_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD52_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD52_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A004E++0x1 line.word 0x0 "TCD52_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1A8000++0x13 line.long 0x0 "CH53_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH53_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH53_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH53_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH53_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A8018++0x3 line.long 0x0 "CH53_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1A8020++0x7 line.long 0x0 "TCD53_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD53_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1A8028++0x3 line.word 0x0 "TCD53_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD53_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1A802C++0x3 line.long 0x0 "TCD53_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1A802C++0x1B line.long 0x0 "TCD53_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD53_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD53_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD53_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD53_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD53_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD53_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1A8048++0x3 line.word 0x0 "TCD53_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD53_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A804A++0x5 line.word 0x0 "TCD53_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD53_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD53_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A804E++0x1 line.word 0x0 "TCD53_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1B0000++0x13 line.long 0x0 "CH54_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH54_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH54_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH54_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH54_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B0018++0x3 line.long 0x0 "CH54_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1B0020++0x7 line.long 0x0 "TCD54_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD54_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1B0028++0x3 line.word 0x0 "TCD54_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD54_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1B002C++0x3 line.long 0x0 "TCD54_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1B002C++0x1B line.long 0x0 "TCD54_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD54_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD54_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD54_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD54_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD54_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD54_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1B0048++0x3 line.word 0x0 "TCD54_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD54_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B004A++0x5 line.word 0x0 "TCD54_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD54_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD54_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B004E++0x1 line.word 0x0 "TCD54_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1B8000++0x13 line.long 0x0 "CH55_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH55_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH55_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH55_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH55_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B8018++0x3 line.long 0x0 "CH55_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1B8020++0x7 line.long 0x0 "TCD55_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD55_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1B8028++0x3 line.word 0x0 "TCD55_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD55_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1B802C++0x3 line.long 0x0 "TCD55_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1B802C++0x1B line.long 0x0 "TCD55_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD55_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD55_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD55_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD55_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD55_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD55_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1B8048++0x3 line.word 0x0 "TCD55_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD55_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B804A++0x5 line.word 0x0 "TCD55_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD55_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD55_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B804E++0x1 line.word 0x0 "TCD55_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1C0000++0x13 line.long 0x0 "CH56_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH56_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH56_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH56_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH56_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C0018++0x3 line.long 0x0 "CH56_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1C0020++0x7 line.long 0x0 "TCD56_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD56_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1C0028++0x3 line.word 0x0 "TCD56_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD56_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1C002C++0x3 line.long 0x0 "TCD56_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1C002C++0x1B line.long 0x0 "TCD56_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD56_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD56_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD56_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD56_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD56_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD56_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1C0048++0x3 line.word 0x0 "TCD56_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD56_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C004A++0x5 line.word 0x0 "TCD56_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD56_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD56_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C004E++0x1 line.word 0x0 "TCD56_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1C8000++0x13 line.long 0x0 "CH57_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH57_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH57_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH57_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH57_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C8018++0x3 line.long 0x0 "CH57_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1C8020++0x7 line.long 0x0 "TCD57_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD57_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1C8028++0x3 line.word 0x0 "TCD57_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD57_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1C802C++0x3 line.long 0x0 "TCD57_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1C802C++0x1B line.long 0x0 "TCD57_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD57_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD57_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD57_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD57_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD57_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD57_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1C8048++0x3 line.word 0x0 "TCD57_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD57_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C804A++0x5 line.word 0x0 "TCD57_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD57_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD57_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C804E++0x1 line.word 0x0 "TCD57_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1D0000++0x13 line.long 0x0 "CH58_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH58_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH58_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH58_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH58_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D0018++0x3 line.long 0x0 "CH58_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1D0020++0x7 line.long 0x0 "TCD58_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD58_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1D0028++0x3 line.word 0x0 "TCD58_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD58_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1D002C++0x3 line.long 0x0 "TCD58_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1D002C++0x1B line.long 0x0 "TCD58_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD58_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD58_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD58_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD58_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD58_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD58_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1D0048++0x3 line.word 0x0 "TCD58_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD58_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D004A++0x5 line.word 0x0 "TCD58_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD58_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD58_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D004E++0x1 line.word 0x0 "TCD58_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1D8000++0x13 line.long 0x0 "CH59_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH59_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH59_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH59_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH59_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D8018++0x3 line.long 0x0 "CH59_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1D8020++0x7 line.long 0x0 "TCD59_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD59_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1D8028++0x3 line.word 0x0 "TCD59_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD59_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1D802C++0x3 line.long 0x0 "TCD59_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1D802C++0x1B line.long 0x0 "TCD59_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD59_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD59_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD59_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD59_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD59_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD59_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1D8048++0x3 line.word 0x0 "TCD59_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD59_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D804A++0x5 line.word 0x0 "TCD59_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD59_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD59_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D804E++0x1 line.word 0x0 "TCD59_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1E0000++0x13 line.long 0x0 "CH60_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH60_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH60_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH60_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH60_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E0018++0x3 line.long 0x0 "CH60_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1E0020++0x7 line.long 0x0 "TCD60_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD60_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1E0028++0x3 line.word 0x0 "TCD60_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD60_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1E002C++0x3 line.long 0x0 "TCD60_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1E002C++0x1B line.long 0x0 "TCD60_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD60_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD60_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD60_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD60_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD60_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD60_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1E0048++0x3 line.word 0x0 "TCD60_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD60_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E004A++0x5 line.word 0x0 "TCD60_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD60_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD60_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E004E++0x1 line.word 0x0 "TCD60_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1E8000++0x13 line.long 0x0 "CH61_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH61_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH61_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH61_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH61_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E8018++0x3 line.long 0x0 "CH61_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1E8020++0x7 line.long 0x0 "TCD61_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD61_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1E8028++0x3 line.word 0x0 "TCD61_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD61_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1E802C++0x3 line.long 0x0 "TCD61_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1E802C++0x1B line.long 0x0 "TCD61_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD61_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD61_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD61_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD61_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD61_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD61_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1E8048++0x3 line.word 0x0 "TCD61_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD61_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E804A++0x5 line.word 0x0 "TCD61_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD61_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD61_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E804E++0x1 line.word 0x0 "TCD61_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1F0000++0x13 line.long 0x0 "CH62_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH62_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH62_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH62_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH62_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F0018++0x3 line.long 0x0 "CH62_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1F0020++0x7 line.long 0x0 "TCD62_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD62_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1F0028++0x3 line.word 0x0 "TCD62_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD62_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1F002C++0x3 line.long 0x0 "TCD62_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1F002C++0x1B line.long 0x0 "TCD62_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD62_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD62_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD62_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD62_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD62_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD62_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1F0048++0x3 line.word 0x0 "TCD62_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD62_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F004A++0x5 line.word 0x0 "TCD62_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD62_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD62_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F004E++0x1 line.word 0x0 "TCD62_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1F8000++0x13 line.long 0x0 "CH63_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--21. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH63_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH63_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." line.long 0xC "CH63_SBR,Channel System Bus Register" hexmask.long.byte 0xC 17.--22. 1. "ATTR,Attribute Output" rbitfld.long 0xC 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline rbitfld.long 0xC 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" rbitfld.long 0xC 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0xC 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" hexmask.long.byte 0xC 0.--4. 1. "MID,Master ID" line.long 0x10 "CH63_PRI,Channel Priority Register" bitfld.long 0x10 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x10 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x10 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F8018++0x3 line.long 0x0 "CH63_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1F8020++0x7 line.long 0x0 "TCD63_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD63_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1F8028++0x3 line.word 0x0 "TCD63_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD63_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1F802C++0x3 line.long 0x0 "TCD63_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1F802C++0x1B line.long 0x0 "TCD63_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD63_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD63_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD63_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD63_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD63_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD63_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1F8048++0x3 line.word 0x0 "TCD63_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD63_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F804A++0x5 line.word 0x0 "TCD63_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD63_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD63_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F804E++0x1 line.word 0x0 "TCD63_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" tree.end tree "MP3" base ad:0x42220000 group.long 0x0++0xB line.long 0x0 "CH0_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH0_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH0_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xC++0x3 line.long 0x0 "CH0_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x10++0x3 line.long 0x0 "CH0_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x18++0x3 line.long 0x0 "CH0_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x20++0x7 line.long 0x0 "TCD0_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD0_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x28++0x3 line.word 0x0 "TCD0_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD0_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2C++0x3 line.long 0x0 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2C++0x1B line.long 0x0 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD0_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD0_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD0_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD0_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x48++0x3 line.word 0x0 "TCD0_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4A++0x5 line.word 0x0 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD0_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4E++0x1 line.word 0x0 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x8000++0xB line.long 0x0 "CH1_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH1_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH1_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x800C++0x3 line.long 0x0 "CH1_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x8010++0x3 line.long 0x0 "CH1_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x8018++0x3 line.long 0x0 "CH1_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x8020++0x7 line.long 0x0 "TCD1_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD1_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x8028++0x3 line.word 0x0 "TCD1_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD1_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x802C++0x3 line.long 0x0 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x802C++0x1B line.long 0x0 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD1_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD1_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD1_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD1_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x8048++0x3 line.word 0x0 "TCD1_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x804A++0x5 line.word 0x0 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD1_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x804E++0x1 line.word 0x0 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x10000++0xB line.long 0x0 "CH2_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH2_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH2_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1000C++0x3 line.long 0x0 "CH2_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x10010++0x3 line.long 0x0 "CH2_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10018++0x3 line.long 0x0 "CH2_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x10020++0x7 line.long 0x0 "TCD2_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD2_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x10028++0x3 line.word 0x0 "TCD2_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD2_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1002C++0x3 line.long 0x0 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1002C++0x1B line.long 0x0 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD2_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD2_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD2_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD2_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x10048++0x3 line.word 0x0 "TCD2_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1004A++0x5 line.word 0x0 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD2_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1004E++0x1 line.word 0x0 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x18000++0xB line.long 0x0 "CH3_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH3_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH3_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1800C++0x3 line.long 0x0 "CH3_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x18010++0x3 line.long 0x0 "CH3_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x18018++0x3 line.long 0x0 "CH3_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x18020++0x7 line.long 0x0 "TCD3_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD3_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x18028++0x3 line.word 0x0 "TCD3_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD3_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1802C++0x3 line.long 0x0 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1802C++0x1B line.long 0x0 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD3_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD3_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD3_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD3_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x18048++0x3 line.word 0x0 "TCD3_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1804A++0x5 line.word 0x0 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD3_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1804E++0x1 line.word 0x0 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x20000++0xB line.long 0x0 "CH4_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH4_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH4_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x2000C++0x3 line.long 0x0 "CH4_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x20010++0x3 line.long 0x0 "CH4_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20018++0x3 line.long 0x0 "CH4_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x20020++0x7 line.long 0x0 "TCD4_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD4_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x20028++0x3 line.word 0x0 "TCD4_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD4_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2002C++0x3 line.long 0x0 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2002C++0x1B line.long 0x0 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD4_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD4_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD4_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD4_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x20048++0x3 line.word 0x0 "TCD4_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x2004A++0x5 line.word 0x0 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD4_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2004E++0x1 line.word 0x0 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x28000++0xB line.long 0x0 "CH5_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH5_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH5_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x2800C++0x3 line.long 0x0 "CH5_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x28010++0x3 line.long 0x0 "CH5_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x28018++0x3 line.long 0x0 "CH5_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x28020++0x7 line.long 0x0 "TCD5_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD5_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x28028++0x3 line.word 0x0 "TCD5_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD5_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x2802C++0x3 line.long 0x0 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x2802C++0x1B line.long 0x0 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD5_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD5_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD5_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD5_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x28048++0x3 line.word 0x0 "TCD5_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x2804A++0x5 line.word 0x0 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD5_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2804E++0x1 line.word 0x0 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x30000++0xB line.long 0x0 "CH6_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH6_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH6_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x3000C++0x3 line.long 0x0 "CH6_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x30010++0x3 line.long 0x0 "CH6_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x30018++0x3 line.long 0x0 "CH6_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x30020++0x7 line.long 0x0 "TCD6_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD6_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x30028++0x3 line.word 0x0 "TCD6_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD6_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x3002C++0x3 line.long 0x0 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x3002C++0x1B line.long 0x0 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD6_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD6_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD6_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD6_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x30048++0x3 line.word 0x0 "TCD6_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x3004A++0x5 line.word 0x0 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD6_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3004E++0x1 line.word 0x0 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x38000++0xB line.long 0x0 "CH7_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH7_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH7_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x3800C++0x3 line.long 0x0 "CH7_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x38010++0x3 line.long 0x0 "CH7_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x38018++0x3 line.long 0x0 "CH7_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x38020++0x7 line.long 0x0 "TCD7_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD7_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x38028++0x3 line.word 0x0 "TCD7_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD7_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x3802C++0x3 line.long 0x0 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x3802C++0x1B line.long 0x0 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD7_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD7_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD7_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD7_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x38048++0x3 line.word 0x0 "TCD7_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x3804A++0x5 line.word 0x0 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD7_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3804E++0x1 line.word 0x0 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x40000++0xB line.long 0x0 "CH8_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH8_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH8_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x4000C++0x3 line.long 0x0 "CH8_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x40010++0x3 line.long 0x0 "CH8_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x40018++0x3 line.long 0x0 "CH8_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x40020++0x7 line.long 0x0 "TCD8_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD8_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x40028++0x3 line.word 0x0 "TCD8_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD8_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x4002C++0x3 line.long 0x0 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x4002C++0x1B line.long 0x0 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD8_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD8_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD8_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD8_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x40048++0x3 line.word 0x0 "TCD8_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4004A++0x5 line.word 0x0 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD8_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4004E++0x1 line.word 0x0 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x48000++0xB line.long 0x0 "CH9_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH9_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH9_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x4800C++0x3 line.long 0x0 "CH9_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x48010++0x3 line.long 0x0 "CH9_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x48018++0x3 line.long 0x0 "CH9_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x48020++0x7 line.long 0x0 "TCD9_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD9_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x48028++0x3 line.word 0x0 "TCD9_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD9_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x4802C++0x3 line.long 0x0 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x4802C++0x1B line.long 0x0 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD9_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD9_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD9_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD9_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x48048++0x3 line.word 0x0 "TCD9_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4804A++0x5 line.word 0x0 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD9_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4804E++0x1 line.word 0x0 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x50000++0xB line.long 0x0 "CH10_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH10_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH10_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x5000C++0x3 line.long 0x0 "CH10_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x50010++0x3 line.long 0x0 "CH10_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x50018++0x3 line.long 0x0 "CH10_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x50020++0x7 line.long 0x0 "TCD10_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD10_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x50028++0x3 line.word 0x0 "TCD10_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD10_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x5002C++0x3 line.long 0x0 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x5002C++0x1B line.long 0x0 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD10_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD10_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD10_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD10_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x50048++0x3 line.word 0x0 "TCD10_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x5004A++0x5 line.word 0x0 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD10_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5004E++0x1 line.word 0x0 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x58000++0xB line.long 0x0 "CH11_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH11_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH11_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x5800C++0x3 line.long 0x0 "CH11_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x58010++0x3 line.long 0x0 "CH11_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x58018++0x3 line.long 0x0 "CH11_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x58020++0x7 line.long 0x0 "TCD11_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD11_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x58028++0x3 line.word 0x0 "TCD11_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD11_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x5802C++0x3 line.long 0x0 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x5802C++0x1B line.long 0x0 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD11_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD11_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD11_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD11_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x58048++0x3 line.word 0x0 "TCD11_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x5804A++0x5 line.word 0x0 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD11_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5804E++0x1 line.word 0x0 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x60000++0xB line.long 0x0 "CH12_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH12_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH12_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x6000C++0x3 line.long 0x0 "CH12_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x60010++0x3 line.long 0x0 "CH12_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x60018++0x3 line.long 0x0 "CH12_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x60020++0x7 line.long 0x0 "TCD12_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD12_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x60028++0x3 line.word 0x0 "TCD12_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD12_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x6002C++0x3 line.long 0x0 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x6002C++0x1B line.long 0x0 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD12_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD12_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD12_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD12_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x60048++0x3 line.word 0x0 "TCD12_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x6004A++0x5 line.word 0x0 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD12_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6004E++0x1 line.word 0x0 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x68000++0xB line.long 0x0 "CH13_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH13_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH13_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x6800C++0x3 line.long 0x0 "CH13_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x68010++0x3 line.long 0x0 "CH13_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x68018++0x3 line.long 0x0 "CH13_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x68020++0x7 line.long 0x0 "TCD13_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD13_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x68028++0x3 line.word 0x0 "TCD13_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD13_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x6802C++0x3 line.long 0x0 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x6802C++0x1B line.long 0x0 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD13_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD13_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD13_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD13_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x68048++0x3 line.word 0x0 "TCD13_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x6804A++0x5 line.word 0x0 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD13_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6804E++0x1 line.word 0x0 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x70000++0xB line.long 0x0 "CH14_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH14_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH14_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x7000C++0x3 line.long 0x0 "CH14_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x70010++0x3 line.long 0x0 "CH14_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x70018++0x3 line.long 0x0 "CH14_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x70020++0x7 line.long 0x0 "TCD14_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD14_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x70028++0x3 line.word 0x0 "TCD14_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD14_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x7002C++0x3 line.long 0x0 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x7002C++0x1B line.long 0x0 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD14_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD14_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD14_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD14_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x70048++0x3 line.word 0x0 "TCD14_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x7004A++0x5 line.word 0x0 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD14_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7004E++0x1 line.word 0x0 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x78000++0xB line.long 0x0 "CH15_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH15_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH15_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x7800C++0x3 line.long 0x0 "CH15_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x78010++0x3 line.long 0x0 "CH15_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x78018++0x3 line.long 0x0 "CH15_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x78020++0x7 line.long 0x0 "TCD15_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD15_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x78028++0x3 line.word 0x0 "TCD15_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD15_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x7802C++0x3 line.long 0x0 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x7802C++0x1B line.long 0x0 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD15_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD15_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD15_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD15_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x78048++0x3 line.word 0x0 "TCD15_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x7804A++0x5 line.word 0x0 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD15_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7804E++0x1 line.word 0x0 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x80000++0xB line.long 0x0 "CH16_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH16_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH16_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x8000C++0x3 line.long 0x0 "CH16_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x80010++0x3 line.long 0x0 "CH16_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x80018++0x3 line.long 0x0 "CH16_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x80020++0x7 line.long 0x0 "TCD16_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD16_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x80028++0x3 line.word 0x0 "TCD16_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD16_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x8002C++0x3 line.long 0x0 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x8002C++0x1B line.long 0x0 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD16_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD16_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD16_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD16_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x80048++0x3 line.word 0x0 "TCD16_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x8004A++0x5 line.word 0x0 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD16_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8004E++0x1 line.word 0x0 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x88000++0xB line.long 0x0 "CH17_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH17_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH17_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x8800C++0x3 line.long 0x0 "CH17_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x88010++0x3 line.long 0x0 "CH17_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x88018++0x3 line.long 0x0 "CH17_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x88020++0x7 line.long 0x0 "TCD17_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD17_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x88028++0x3 line.word 0x0 "TCD17_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD17_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x8802C++0x3 line.long 0x0 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x8802C++0x1B line.long 0x0 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD17_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD17_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD17_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD17_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x88048++0x3 line.word 0x0 "TCD17_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x8804A++0x5 line.word 0x0 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD17_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8804E++0x1 line.word 0x0 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x90000++0xB line.long 0x0 "CH18_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH18_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH18_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x9000C++0x3 line.long 0x0 "CH18_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x90010++0x3 line.long 0x0 "CH18_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x90018++0x3 line.long 0x0 "CH18_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x90020++0x7 line.long 0x0 "TCD18_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD18_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x90028++0x3 line.word 0x0 "TCD18_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD18_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x9002C++0x3 line.long 0x0 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x9002C++0x1B line.long 0x0 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD18_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD18_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD18_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD18_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x90048++0x3 line.word 0x0 "TCD18_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x9004A++0x5 line.word 0x0 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD18_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9004E++0x1 line.word 0x0 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x98000++0xB line.long 0x0 "CH19_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH19_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH19_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x9800C++0x3 line.long 0x0 "CH19_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x98010++0x3 line.long 0x0 "CH19_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x98018++0x3 line.long 0x0 "CH19_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x98020++0x7 line.long 0x0 "TCD19_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD19_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x98028++0x3 line.word 0x0 "TCD19_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD19_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x9802C++0x3 line.long 0x0 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x9802C++0x1B line.long 0x0 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD19_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD19_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD19_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD19_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x98048++0x3 line.word 0x0 "TCD19_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x9804A++0x5 line.word 0x0 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD19_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9804E++0x1 line.word 0x0 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xA0000++0xB line.long 0x0 "CH20_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH20_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH20_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xA000C++0x3 line.long 0x0 "CH20_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xA0010++0x3 line.long 0x0 "CH20_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA0018++0x3 line.long 0x0 "CH20_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xA0020++0x7 line.long 0x0 "TCD20_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD20_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xA0028++0x3 line.word 0x0 "TCD20_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD20_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xA002C++0x3 line.long 0x0 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xA002C++0x1B line.long 0x0 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD20_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD20_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD20_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD20_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xA0048++0x3 line.word 0x0 "TCD20_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA004A++0x5 line.word 0x0 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD20_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA004E++0x1 line.word 0x0 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xA8000++0xB line.long 0x0 "CH21_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH21_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH21_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xA800C++0x3 line.long 0x0 "CH21_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xA8010++0x3 line.long 0x0 "CH21_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA8018++0x3 line.long 0x0 "CH21_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xA8020++0x7 line.long 0x0 "TCD21_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD21_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xA8028++0x3 line.word 0x0 "TCD21_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD21_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xA802C++0x3 line.long 0x0 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xA802C++0x1B line.long 0x0 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD21_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD21_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD21_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD21_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xA8048++0x3 line.word 0x0 "TCD21_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA804A++0x5 line.word 0x0 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD21_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA804E++0x1 line.word 0x0 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xB0000++0xB line.long 0x0 "CH22_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH22_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH22_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xB000C++0x3 line.long 0x0 "CH22_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xB0010++0x3 line.long 0x0 "CH22_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB0018++0x3 line.long 0x0 "CH22_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xB0020++0x7 line.long 0x0 "TCD22_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD22_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xB0028++0x3 line.word 0x0 "TCD22_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD22_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xB002C++0x3 line.long 0x0 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xB002C++0x1B line.long 0x0 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD22_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD22_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD22_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD22_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xB0048++0x3 line.word 0x0 "TCD22_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB004A++0x5 line.word 0x0 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD22_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB004E++0x1 line.word 0x0 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xB8000++0xB line.long 0x0 "CH23_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH23_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH23_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xB800C++0x3 line.long 0x0 "CH23_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xB8010++0x3 line.long 0x0 "CH23_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB8018++0x3 line.long 0x0 "CH23_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xB8020++0x7 line.long 0x0 "TCD23_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD23_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xB8028++0x3 line.word 0x0 "TCD23_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD23_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xB802C++0x3 line.long 0x0 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xB802C++0x1B line.long 0x0 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD23_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD23_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD23_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD23_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xB8048++0x3 line.word 0x0 "TCD23_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB804A++0x5 line.word 0x0 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD23_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB804E++0x1 line.word 0x0 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xC0000++0xB line.long 0x0 "CH24_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH24_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH24_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xC000C++0x3 line.long 0x0 "CH24_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xC0010++0x3 line.long 0x0 "CH24_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC0018++0x3 line.long 0x0 "CH24_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xC0020++0x7 line.long 0x0 "TCD24_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD24_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xC0028++0x3 line.word 0x0 "TCD24_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD24_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xC002C++0x3 line.long 0x0 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xC002C++0x1B line.long 0x0 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD24_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD24_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD24_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD24_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xC0048++0x3 line.word 0x0 "TCD24_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC004A++0x5 line.word 0x0 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD24_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC004E++0x1 line.word 0x0 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xC8000++0xB line.long 0x0 "CH25_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH25_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH25_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xC800C++0x3 line.long 0x0 "CH25_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xC8010++0x3 line.long 0x0 "CH25_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC8018++0x3 line.long 0x0 "CH25_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xC8020++0x7 line.long 0x0 "TCD25_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD25_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xC8028++0x3 line.word 0x0 "TCD25_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD25_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xC802C++0x3 line.long 0x0 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xC802C++0x1B line.long 0x0 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD25_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD25_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD25_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD25_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xC8048++0x3 line.word 0x0 "TCD25_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC804A++0x5 line.word 0x0 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD25_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC804E++0x1 line.word 0x0 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xD0000++0xB line.long 0x0 "CH26_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH26_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH26_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xD000C++0x3 line.long 0x0 "CH26_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xD0010++0x3 line.long 0x0 "CH26_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD0018++0x3 line.long 0x0 "CH26_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xD0020++0x7 line.long 0x0 "TCD26_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD26_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xD0028++0x3 line.word 0x0 "TCD26_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD26_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xD002C++0x3 line.long 0x0 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xD002C++0x1B line.long 0x0 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD26_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD26_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD26_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD26_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xD0048++0x3 line.word 0x0 "TCD26_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD004A++0x5 line.word 0x0 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD26_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD004E++0x1 line.word 0x0 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xD8000++0xB line.long 0x0 "CH27_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH27_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH27_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xD800C++0x3 line.long 0x0 "CH27_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xD8010++0x3 line.long 0x0 "CH27_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD8018++0x3 line.long 0x0 "CH27_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xD8020++0x7 line.long 0x0 "TCD27_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD27_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xD8028++0x3 line.word 0x0 "TCD27_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD27_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xD802C++0x3 line.long 0x0 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xD802C++0x1B line.long 0x0 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD27_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD27_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD27_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD27_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xD8048++0x3 line.word 0x0 "TCD27_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD804A++0x5 line.word 0x0 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD27_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD804E++0x1 line.word 0x0 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xE0000++0xB line.long 0x0 "CH28_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH28_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH28_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xE000C++0x3 line.long 0x0 "CH28_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xE0010++0x3 line.long 0x0 "CH28_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE0018++0x3 line.long 0x0 "CH28_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xE0020++0x7 line.long 0x0 "TCD28_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD28_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xE0028++0x3 line.word 0x0 "TCD28_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD28_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xE002C++0x3 line.long 0x0 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xE002C++0x1B line.long 0x0 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD28_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD28_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD28_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD28_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xE0048++0x3 line.word 0x0 "TCD28_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE004A++0x5 line.word 0x0 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD28_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE004E++0x1 line.word 0x0 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xE8000++0xB line.long 0x0 "CH29_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH29_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH29_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xE800C++0x3 line.long 0x0 "CH29_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xE8010++0x3 line.long 0x0 "CH29_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE8018++0x3 line.long 0x0 "CH29_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xE8020++0x7 line.long 0x0 "TCD29_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD29_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xE8028++0x3 line.word 0x0 "TCD29_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD29_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xE802C++0x3 line.long 0x0 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xE802C++0x1B line.long 0x0 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD29_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD29_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD29_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD29_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xE8048++0x3 line.word 0x0 "TCD29_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE804A++0x5 line.word 0x0 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD29_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE804E++0x1 line.word 0x0 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xF0000++0xB line.long 0x0 "CH30_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH30_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH30_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xF000C++0x3 line.long 0x0 "CH30_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xF0010++0x3 line.long 0x0 "CH30_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF0018++0x3 line.long 0x0 "CH30_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xF0020++0x7 line.long 0x0 "TCD30_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD30_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xF0028++0x3 line.word 0x0 "TCD30_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD30_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xF002C++0x3 line.long 0x0 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xF002C++0x1B line.long 0x0 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD30_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD30_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD30_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD30_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xF0048++0x3 line.word 0x0 "TCD30_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF004A++0x5 line.word 0x0 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD30_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF004E++0x1 line.word 0x0 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0xF8000++0xB line.long 0x0 "CH31_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH31_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH31_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0xF800C++0x3 line.long 0x0 "CH31_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0xF8010++0x3 line.long 0x0 "CH31_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF8018++0x3 line.long 0x0 "CH31_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0xF8020++0x7 line.long 0x0 "TCD31_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD31_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0xF8028++0x3 line.word 0x0 "TCD31_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD31_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0xF802C++0x3 line.long 0x0 "TCD31_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0xF802C++0x1B line.long 0x0 "TCD31_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD31_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD31_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD31_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD31_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD31_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD31_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0xF8048++0x3 line.word 0x0 "TCD31_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD31_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF804A++0x5 line.word 0x0 "TCD31_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD31_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD31_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF804E++0x1 line.word 0x0 "TCD31_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x100000++0xB line.long 0x0 "CH32_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH32_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH32_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x10000C++0x3 line.long 0x0 "CH32_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x100010++0x3 line.long 0x0 "CH32_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x100018++0x3 line.long 0x0 "CH32_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x100020++0x7 line.long 0x0 "TCD32_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD32_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x100028++0x3 line.word 0x0 "TCD32_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD32_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x10002C++0x3 line.long 0x0 "TCD32_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x10002C++0x1B line.long 0x0 "TCD32_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD32_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD32_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD32_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD32_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD32_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD32_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x100048++0x3 line.word 0x0 "TCD32_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD32_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10004A++0x5 line.word 0x0 "TCD32_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD32_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD32_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10004E++0x1 line.word 0x0 "TCD32_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x108000++0xB line.long 0x0 "CH33_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH33_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH33_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x10800C++0x3 line.long 0x0 "CH33_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x108010++0x3 line.long 0x0 "CH33_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x108018++0x3 line.long 0x0 "CH33_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x108020++0x7 line.long 0x0 "TCD33_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD33_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x108028++0x3 line.word 0x0 "TCD33_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD33_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x10802C++0x3 line.long 0x0 "TCD33_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x10802C++0x1B line.long 0x0 "TCD33_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD33_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD33_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD33_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD33_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD33_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD33_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x108048++0x3 line.word 0x0 "TCD33_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD33_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10804A++0x5 line.word 0x0 "TCD33_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD33_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD33_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10804E++0x1 line.word 0x0 "TCD33_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x110000++0xB line.long 0x0 "CH34_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH34_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH34_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x11000C++0x3 line.long 0x0 "CH34_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x110010++0x3 line.long 0x0 "CH34_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x110018++0x3 line.long 0x0 "CH34_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x110020++0x7 line.long 0x0 "TCD34_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD34_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x110028++0x3 line.word 0x0 "TCD34_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD34_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x11002C++0x3 line.long 0x0 "TCD34_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x11002C++0x1B line.long 0x0 "TCD34_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD34_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD34_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD34_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD34_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD34_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD34_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x110048++0x3 line.word 0x0 "TCD34_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD34_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x11004A++0x5 line.word 0x0 "TCD34_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD34_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD34_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11004E++0x1 line.word 0x0 "TCD34_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x118000++0xB line.long 0x0 "CH35_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH35_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH35_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x11800C++0x3 line.long 0x0 "CH35_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x118010++0x3 line.long 0x0 "CH35_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x118018++0x3 line.long 0x0 "CH35_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x118020++0x7 line.long 0x0 "TCD35_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD35_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x118028++0x3 line.word 0x0 "TCD35_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD35_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x11802C++0x3 line.long 0x0 "TCD35_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x11802C++0x1B line.long 0x0 "TCD35_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD35_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD35_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD35_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD35_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD35_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD35_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x118048++0x3 line.word 0x0 "TCD35_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD35_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x11804A++0x5 line.word 0x0 "TCD35_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD35_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD35_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11804E++0x1 line.word 0x0 "TCD35_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x120000++0xB line.long 0x0 "CH36_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH36_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH36_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x12000C++0x3 line.long 0x0 "CH36_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x120010++0x3 line.long 0x0 "CH36_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x120018++0x3 line.long 0x0 "CH36_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x120020++0x7 line.long 0x0 "TCD36_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD36_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x120028++0x3 line.word 0x0 "TCD36_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD36_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x12002C++0x3 line.long 0x0 "TCD36_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x12002C++0x1B line.long 0x0 "TCD36_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD36_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD36_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD36_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD36_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD36_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD36_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x120048++0x3 line.word 0x0 "TCD36_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD36_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x12004A++0x5 line.word 0x0 "TCD36_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD36_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD36_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12004E++0x1 line.word 0x0 "TCD36_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x128000++0xB line.long 0x0 "CH37_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH37_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH37_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x12800C++0x3 line.long 0x0 "CH37_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x128010++0x3 line.long 0x0 "CH37_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x128018++0x3 line.long 0x0 "CH37_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x128020++0x7 line.long 0x0 "TCD37_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD37_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x128028++0x3 line.word 0x0 "TCD37_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD37_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x12802C++0x3 line.long 0x0 "TCD37_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x12802C++0x1B line.long 0x0 "TCD37_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD37_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD37_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD37_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD37_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD37_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD37_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x128048++0x3 line.word 0x0 "TCD37_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD37_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x12804A++0x5 line.word 0x0 "TCD37_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD37_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD37_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12804E++0x1 line.word 0x0 "TCD37_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x130000++0xB line.long 0x0 "CH38_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH38_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH38_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x13000C++0x3 line.long 0x0 "CH38_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x130010++0x3 line.long 0x0 "CH38_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x130018++0x3 line.long 0x0 "CH38_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x130020++0x7 line.long 0x0 "TCD38_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD38_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x130028++0x3 line.word 0x0 "TCD38_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD38_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x13002C++0x3 line.long 0x0 "TCD38_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x13002C++0x1B line.long 0x0 "TCD38_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD38_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD38_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD38_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD38_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD38_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD38_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x130048++0x3 line.word 0x0 "TCD38_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD38_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x13004A++0x5 line.word 0x0 "TCD38_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD38_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD38_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13004E++0x1 line.word 0x0 "TCD38_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x138000++0xB line.long 0x0 "CH39_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH39_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH39_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x13800C++0x3 line.long 0x0 "CH39_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x138010++0x3 line.long 0x0 "CH39_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x138018++0x3 line.long 0x0 "CH39_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x138020++0x7 line.long 0x0 "TCD39_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD39_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x138028++0x3 line.word 0x0 "TCD39_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD39_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x13802C++0x3 line.long 0x0 "TCD39_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x13802C++0x1B line.long 0x0 "TCD39_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD39_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD39_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD39_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD39_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD39_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD39_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x138048++0x3 line.word 0x0 "TCD39_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD39_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x13804A++0x5 line.word 0x0 "TCD39_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD39_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD39_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13804E++0x1 line.word 0x0 "TCD39_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x140000++0xB line.long 0x0 "CH40_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH40_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH40_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x14000C++0x3 line.long 0x0 "CH40_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x140010++0x3 line.long 0x0 "CH40_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x140018++0x3 line.long 0x0 "CH40_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x140020++0x7 line.long 0x0 "TCD40_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD40_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x140028++0x3 line.word 0x0 "TCD40_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD40_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x14002C++0x3 line.long 0x0 "TCD40_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x14002C++0x1B line.long 0x0 "TCD40_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD40_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD40_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD40_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD40_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD40_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD40_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x140048++0x3 line.word 0x0 "TCD40_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD40_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x14004A++0x5 line.word 0x0 "TCD40_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD40_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD40_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14004E++0x1 line.word 0x0 "TCD40_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x148000++0xB line.long 0x0 "CH41_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH41_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH41_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x14800C++0x3 line.long 0x0 "CH41_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x148010++0x3 line.long 0x0 "CH41_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x148018++0x3 line.long 0x0 "CH41_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x148020++0x7 line.long 0x0 "TCD41_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD41_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x148028++0x3 line.word 0x0 "TCD41_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD41_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x14802C++0x3 line.long 0x0 "TCD41_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x14802C++0x1B line.long 0x0 "TCD41_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD41_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD41_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD41_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD41_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD41_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD41_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x148048++0x3 line.word 0x0 "TCD41_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD41_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x14804A++0x5 line.word 0x0 "TCD41_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD41_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD41_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14804E++0x1 line.word 0x0 "TCD41_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x150000++0xB line.long 0x0 "CH42_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH42_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH42_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x15000C++0x3 line.long 0x0 "CH42_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x150010++0x3 line.long 0x0 "CH42_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x150018++0x3 line.long 0x0 "CH42_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x150020++0x7 line.long 0x0 "TCD42_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD42_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x150028++0x3 line.word 0x0 "TCD42_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD42_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x15002C++0x3 line.long 0x0 "TCD42_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x15002C++0x1B line.long 0x0 "TCD42_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD42_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD42_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD42_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD42_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD42_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD42_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x150048++0x3 line.word 0x0 "TCD42_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD42_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x15004A++0x5 line.word 0x0 "TCD42_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD42_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD42_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15004E++0x1 line.word 0x0 "TCD42_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x158000++0xB line.long 0x0 "CH43_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH43_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH43_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x15800C++0x3 line.long 0x0 "CH43_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x158010++0x3 line.long 0x0 "CH43_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x158018++0x3 line.long 0x0 "CH43_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x158020++0x7 line.long 0x0 "TCD43_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD43_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x158028++0x3 line.word 0x0 "TCD43_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD43_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x15802C++0x3 line.long 0x0 "TCD43_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x15802C++0x1B line.long 0x0 "TCD43_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD43_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD43_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD43_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD43_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD43_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD43_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x158048++0x3 line.word 0x0 "TCD43_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD43_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x15804A++0x5 line.word 0x0 "TCD43_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD43_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD43_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15804E++0x1 line.word 0x0 "TCD43_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x160000++0xB line.long 0x0 "CH44_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH44_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH44_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x16000C++0x3 line.long 0x0 "CH44_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x160010++0x3 line.long 0x0 "CH44_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x160018++0x3 line.long 0x0 "CH44_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x160020++0x7 line.long 0x0 "TCD44_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD44_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x160028++0x3 line.word 0x0 "TCD44_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD44_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x16002C++0x3 line.long 0x0 "TCD44_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x16002C++0x1B line.long 0x0 "TCD44_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD44_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD44_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD44_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD44_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD44_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD44_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x160048++0x3 line.word 0x0 "TCD44_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD44_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x16004A++0x5 line.word 0x0 "TCD44_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD44_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD44_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16004E++0x1 line.word 0x0 "TCD44_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x168000++0xB line.long 0x0 "CH45_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH45_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH45_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x16800C++0x3 line.long 0x0 "CH45_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x168010++0x3 line.long 0x0 "CH45_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x168018++0x3 line.long 0x0 "CH45_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x168020++0x7 line.long 0x0 "TCD45_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD45_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x168028++0x3 line.word 0x0 "TCD45_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD45_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x16802C++0x3 line.long 0x0 "TCD45_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x16802C++0x1B line.long 0x0 "TCD45_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD45_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD45_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD45_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD45_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD45_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD45_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x168048++0x3 line.word 0x0 "TCD45_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD45_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x16804A++0x5 line.word 0x0 "TCD45_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD45_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD45_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16804E++0x1 line.word 0x0 "TCD45_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x170000++0xB line.long 0x0 "CH46_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH46_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH46_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x17000C++0x3 line.long 0x0 "CH46_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x170010++0x3 line.long 0x0 "CH46_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x170018++0x3 line.long 0x0 "CH46_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x170020++0x7 line.long 0x0 "TCD46_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD46_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x170028++0x3 line.word 0x0 "TCD46_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD46_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x17002C++0x3 line.long 0x0 "TCD46_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x17002C++0x1B line.long 0x0 "TCD46_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD46_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD46_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD46_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD46_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD46_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD46_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x170048++0x3 line.word 0x0 "TCD46_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD46_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x17004A++0x5 line.word 0x0 "TCD46_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD46_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD46_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17004E++0x1 line.word 0x0 "TCD46_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x178000++0xB line.long 0x0 "CH47_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH47_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH47_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x17800C++0x3 line.long 0x0 "CH47_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x178010++0x3 line.long 0x0 "CH47_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x178018++0x3 line.long 0x0 "CH47_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x178020++0x7 line.long 0x0 "TCD47_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD47_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x178028++0x3 line.word 0x0 "TCD47_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD47_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x17802C++0x3 line.long 0x0 "TCD47_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x17802C++0x1B line.long 0x0 "TCD47_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD47_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD47_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD47_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD47_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD47_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD47_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x178048++0x3 line.word 0x0 "TCD47_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD47_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x17804A++0x5 line.word 0x0 "TCD47_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD47_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD47_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17804E++0x1 line.word 0x0 "TCD47_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x180000++0xB line.long 0x0 "CH48_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH48_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH48_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x18000C++0x3 line.long 0x0 "CH48_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x180010++0x3 line.long 0x0 "CH48_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x180018++0x3 line.long 0x0 "CH48_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x180020++0x7 line.long 0x0 "TCD48_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD48_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x180028++0x3 line.word 0x0 "TCD48_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD48_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x18002C++0x3 line.long 0x0 "TCD48_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x18002C++0x1B line.long 0x0 "TCD48_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD48_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD48_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD48_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD48_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD48_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD48_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x180048++0x3 line.word 0x0 "TCD48_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD48_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x18004A++0x5 line.word 0x0 "TCD48_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD48_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD48_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18004E++0x1 line.word 0x0 "TCD48_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x188000++0xB line.long 0x0 "CH49_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH49_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH49_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x18800C++0x3 line.long 0x0 "CH49_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x188010++0x3 line.long 0x0 "CH49_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x188018++0x3 line.long 0x0 "CH49_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x188020++0x7 line.long 0x0 "TCD49_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD49_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x188028++0x3 line.word 0x0 "TCD49_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD49_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x18802C++0x3 line.long 0x0 "TCD49_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x18802C++0x1B line.long 0x0 "TCD49_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD49_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD49_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD49_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD49_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD49_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD49_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x188048++0x3 line.word 0x0 "TCD49_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD49_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x18804A++0x5 line.word 0x0 "TCD49_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD49_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD49_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18804E++0x1 line.word 0x0 "TCD49_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x190000++0xB line.long 0x0 "CH50_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH50_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH50_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x19000C++0x3 line.long 0x0 "CH50_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x190010++0x3 line.long 0x0 "CH50_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x190018++0x3 line.long 0x0 "CH50_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x190020++0x7 line.long 0x0 "TCD50_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD50_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x190028++0x3 line.word 0x0 "TCD50_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD50_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x19002C++0x3 line.long 0x0 "TCD50_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x19002C++0x1B line.long 0x0 "TCD50_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD50_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD50_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD50_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD50_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD50_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD50_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x190048++0x3 line.word 0x0 "TCD50_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD50_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x19004A++0x5 line.word 0x0 "TCD50_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD50_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD50_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19004E++0x1 line.word 0x0 "TCD50_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x198000++0xB line.long 0x0 "CH51_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH51_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH51_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x19800C++0x3 line.long 0x0 "CH51_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x198010++0x3 line.long 0x0 "CH51_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x198018++0x3 line.long 0x0 "CH51_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x198020++0x7 line.long 0x0 "TCD51_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD51_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x198028++0x3 line.word 0x0 "TCD51_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD51_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x19802C++0x3 line.long 0x0 "TCD51_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x19802C++0x1B line.long 0x0 "TCD51_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD51_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD51_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD51_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD51_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD51_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD51_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x198048++0x3 line.word 0x0 "TCD51_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD51_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x19804A++0x5 line.word 0x0 "TCD51_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD51_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD51_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19804E++0x1 line.word 0x0 "TCD51_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1A0000++0xB line.long 0x0 "CH52_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH52_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH52_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1A000C++0x3 line.long 0x0 "CH52_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1A0010++0x3 line.long 0x0 "CH52_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A0018++0x3 line.long 0x0 "CH52_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1A0020++0x7 line.long 0x0 "TCD52_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD52_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1A0028++0x3 line.word 0x0 "TCD52_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD52_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1A002C++0x3 line.long 0x0 "TCD52_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1A002C++0x1B line.long 0x0 "TCD52_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD52_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD52_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD52_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD52_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD52_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD52_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1A0048++0x3 line.word 0x0 "TCD52_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD52_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A004A++0x5 line.word 0x0 "TCD52_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD52_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD52_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A004E++0x1 line.word 0x0 "TCD52_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1A8000++0xB line.long 0x0 "CH53_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH53_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH53_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1A800C++0x3 line.long 0x0 "CH53_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1A8010++0x3 line.long 0x0 "CH53_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A8018++0x3 line.long 0x0 "CH53_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1A8020++0x7 line.long 0x0 "TCD53_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD53_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1A8028++0x3 line.word 0x0 "TCD53_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD53_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1A802C++0x3 line.long 0x0 "TCD53_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1A802C++0x1B line.long 0x0 "TCD53_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD53_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD53_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD53_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD53_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD53_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD53_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1A8048++0x3 line.word 0x0 "TCD53_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD53_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A804A++0x5 line.word 0x0 "TCD53_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD53_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD53_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A804E++0x1 line.word 0x0 "TCD53_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1B0000++0xB line.long 0x0 "CH54_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH54_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH54_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1B000C++0x3 line.long 0x0 "CH54_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1B0010++0x3 line.long 0x0 "CH54_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B0018++0x3 line.long 0x0 "CH54_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1B0020++0x7 line.long 0x0 "TCD54_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD54_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1B0028++0x3 line.word 0x0 "TCD54_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD54_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1B002C++0x3 line.long 0x0 "TCD54_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1B002C++0x1B line.long 0x0 "TCD54_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD54_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD54_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD54_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD54_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD54_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD54_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1B0048++0x3 line.word 0x0 "TCD54_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD54_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B004A++0x5 line.word 0x0 "TCD54_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD54_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD54_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B004E++0x1 line.word 0x0 "TCD54_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1B8000++0xB line.long 0x0 "CH55_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH55_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH55_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1B800C++0x3 line.long 0x0 "CH55_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1B8010++0x3 line.long 0x0 "CH55_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B8018++0x3 line.long 0x0 "CH55_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1B8020++0x7 line.long 0x0 "TCD55_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD55_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1B8028++0x3 line.word 0x0 "TCD55_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD55_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1B802C++0x3 line.long 0x0 "TCD55_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1B802C++0x1B line.long 0x0 "TCD55_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD55_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD55_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD55_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD55_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD55_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD55_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1B8048++0x3 line.word 0x0 "TCD55_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD55_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B804A++0x5 line.word 0x0 "TCD55_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD55_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD55_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B804E++0x1 line.word 0x0 "TCD55_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1C0000++0xB line.long 0x0 "CH56_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH56_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH56_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1C000C++0x3 line.long 0x0 "CH56_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1C0010++0x3 line.long 0x0 "CH56_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C0018++0x3 line.long 0x0 "CH56_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1C0020++0x7 line.long 0x0 "TCD56_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD56_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1C0028++0x3 line.word 0x0 "TCD56_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD56_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1C002C++0x3 line.long 0x0 "TCD56_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1C002C++0x1B line.long 0x0 "TCD56_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD56_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD56_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD56_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD56_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD56_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD56_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1C0048++0x3 line.word 0x0 "TCD56_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD56_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C004A++0x5 line.word 0x0 "TCD56_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD56_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD56_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C004E++0x1 line.word 0x0 "TCD56_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1C8000++0xB line.long 0x0 "CH57_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH57_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH57_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1C800C++0x3 line.long 0x0 "CH57_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1C8010++0x3 line.long 0x0 "CH57_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C8018++0x3 line.long 0x0 "CH57_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1C8020++0x7 line.long 0x0 "TCD57_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD57_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1C8028++0x3 line.word 0x0 "TCD57_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD57_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1C802C++0x3 line.long 0x0 "TCD57_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1C802C++0x1B line.long 0x0 "TCD57_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD57_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD57_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD57_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD57_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD57_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD57_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1C8048++0x3 line.word 0x0 "TCD57_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD57_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C804A++0x5 line.word 0x0 "TCD57_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD57_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD57_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C804E++0x1 line.word 0x0 "TCD57_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1D0000++0xB line.long 0x0 "CH58_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH58_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH58_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1D000C++0x3 line.long 0x0 "CH58_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1D0010++0x3 line.long 0x0 "CH58_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D0018++0x3 line.long 0x0 "CH58_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1D0020++0x7 line.long 0x0 "TCD58_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD58_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1D0028++0x3 line.word 0x0 "TCD58_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD58_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1D002C++0x3 line.long 0x0 "TCD58_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1D002C++0x1B line.long 0x0 "TCD58_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD58_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD58_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD58_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD58_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD58_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD58_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1D0048++0x3 line.word 0x0 "TCD58_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD58_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D004A++0x5 line.word 0x0 "TCD58_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD58_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD58_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D004E++0x1 line.word 0x0 "TCD58_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1D8000++0xB line.long 0x0 "CH59_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH59_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH59_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1D800C++0x3 line.long 0x0 "CH59_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1D8010++0x3 line.long 0x0 "CH59_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D8018++0x3 line.long 0x0 "CH59_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1D8020++0x7 line.long 0x0 "TCD59_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD59_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1D8028++0x3 line.word 0x0 "TCD59_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD59_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1D802C++0x3 line.long 0x0 "TCD59_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1D802C++0x1B line.long 0x0 "TCD59_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD59_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD59_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD59_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD59_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD59_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD59_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1D8048++0x3 line.word 0x0 "TCD59_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD59_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D804A++0x5 line.word 0x0 "TCD59_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD59_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD59_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D804E++0x1 line.word 0x0 "TCD59_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1E0000++0xB line.long 0x0 "CH60_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH60_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH60_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1E000C++0x3 line.long 0x0 "CH60_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1E0010++0x3 line.long 0x0 "CH60_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E0018++0x3 line.long 0x0 "CH60_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1E0020++0x7 line.long 0x0 "TCD60_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD60_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1E0028++0x3 line.word 0x0 "TCD60_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD60_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1E002C++0x3 line.long 0x0 "TCD60_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1E002C++0x1B line.long 0x0 "TCD60_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD60_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD60_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD60_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD60_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD60_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD60_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1E0048++0x3 line.word 0x0 "TCD60_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD60_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E004A++0x5 line.word 0x0 "TCD60_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD60_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD60_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E004E++0x1 line.word 0x0 "TCD60_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1E8000++0xB line.long 0x0 "CH61_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH61_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH61_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1E800C++0x3 line.long 0x0 "CH61_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1E8010++0x3 line.long 0x0 "CH61_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E8018++0x3 line.long 0x0 "CH61_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1E8020++0x7 line.long 0x0 "TCD61_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD61_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1E8028++0x3 line.word 0x0 "TCD61_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD61_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1E802C++0x3 line.long 0x0 "TCD61_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1E802C++0x1B line.long 0x0 "TCD61_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD61_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD61_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD61_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD61_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD61_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD61_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1E8048++0x3 line.word 0x0 "TCD61_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD61_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E804A++0x5 line.word 0x0 "TCD61_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD61_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD61_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E804E++0x1 line.word 0x0 "TCD61_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1F0000++0xB line.long 0x0 "CH62_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH62_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH62_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1F000C++0x3 line.long 0x0 "CH62_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1F0010++0x3 line.long 0x0 "CH62_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F0018++0x3 line.long 0x0 "CH62_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1F0020++0x7 line.long 0x0 "TCD62_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD62_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1F0028++0x3 line.word 0x0 "TCD62_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD62_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1F002C++0x3 line.long 0x0 "TCD62_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1F002C++0x1B line.long 0x0 "TCD62_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD62_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD62_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD62_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD62_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD62_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD62_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1F0048++0x3 line.word 0x0 "TCD62_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD62_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F004A++0x5 line.word 0x0 "TCD62_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD62_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD62_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F004E++0x1 line.word 0x0 "TCD62_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" group.long 0x1F8000++0xB line.long 0x0 "CH63_CSR,Channel Control and Status Register" rbitfld.long 0x0 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x0 30. "DONE,Channel Done" "0,1" newline hexmask.long.byte 0x0 16.--22. 1. "SIGNEXT,Sign Extension" hexmask.long.byte 0x0 12.--15. 1. "SWAP,Swap size" newline bitfld.long 0x0 7. "ECX,Stop transferring data and set an error flag" "0: No operation,1: Stop the channel with error reporting" bitfld.long 0x0 6. "CX,Stop transferring data" "0: No operation,1: Stop the channel no error reporting" newline bitfld.long 0x0 2. "EEI,Enable Error Interrupt" "0: The error signal for corresponding channel does..,1: The assertion of the error signal for.." bitfld.long 0x0 1. "EARQ,Enable Asynchronous DMA Request in stop mode for channel" "0: Disable asynchronous DMA request for the channel.,1: Enable asynchronous DMA request for the channel." newline bitfld.long 0x0 0. "ERQ,Enable DMA Request" "0: The DMA hardware request signal for the..,1: The DMA hardware request signal for the.." line.long 0x4 "CH63_ES,Channel Error Status Register" eventfld.long 0x4 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x4 9. "UCE,Uncorrectable TCD error during channel execution." "0: No uncorrectable ECC error,1: The last recorded error was an uncorrectable TCD.." newline rbitfld.long 0x4 8. "ECX,Transfer Canceled" "0: No canceled transfers,1: The last recorded entry was a canceled transfer.." rbitfld.long 0x4 7. "SAE,Source Address Error" "0: No source address configuration error.,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was a configuration.." newline rbitfld.long 0x4 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: The last recorded error was a configuration.." rbitfld.long 0x4 1. "SBE,Source Bus Error" "0: No source bus error,1: The last recorded error was a bus error on a.." newline rbitfld.long 0x4 0. "DBE,Destination Bus Error" "0: No destination bus error,1: The last recorded error was a bus error on a.." line.long 0x8 "CH63_INT,Channel Interrupt Status Register" eventfld.long 0x8 0. "INT,Interrupt Request" "0: The interrupt request for corresponding channel..,1: The interrupt request for corresponding channel.." rgroup.long 0x1F800C++0x3 line.long 0x0 "CH63_SBR,Channel System Bus Register" bitfld.long 0x0 16. "EMI,Enable Master ID replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" bitfld.long 0x0 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" newline bitfld.long 0x0 14. "SEC,Security Level" "0: Non secure protection level for DMA transfers,1: Secure protection level for DMA transfers" bitfld.long 0x0 13. "INSTR,Instruction/Data Access" "0: Data access for DMA transfers,1: Instruction access for DMA transfers" newline hexmask.long.byte 0x0 0.--7. 1. "MID,Master ID" group.long 0x1F8010++0x3 line.long 0x0 "CH63_PRI,Channel Priority Register" bitfld.long 0x0 31. "ECP,Enable Channel Preemption." "0: The channel cannot be suspended by a higher..,1: The channel can be temporarily suspended by the.." bitfld.long 0x0 30. "DPA,Disable Preempt Ability." "0: The channel can suspend a lower priority channel.,1: The channel cannot suspend any other channel.." newline bitfld.long 0x0 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F8018++0x3 line.long 0x0 "CH63_MATTR,Memory Attributes Register" hexmask.long.byte 0x0 18.--21. 1. "WSCORE,Stash Local Processor ID" bitfld.long 0x0 17. "WSTHRD,Stash Local Processor Thread" "0,1" newline bitfld.long 0x0 16. "WSENB,Stash Local Processor Enable" "0: Write stash target is disabled,1: Write stash target is enabled" hexmask.long.byte 0x0 12.--15. 1. "WSNOOPS,Write Snoop Transaction Type" newline bitfld.long 0x0 10.--11. "WDOMAINS,Write Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" bitfld.long 0x0 8.--9. "RDOMAINS,Read Domain" "0: Domain is Non-shareable,1: Domain is Inner shareable,2: Domain is Outer Shareable,?" newline hexmask.long.byte 0x0 4.--7. 1. "WCACHE,Write Cache Attributes" hexmask.long.byte 0x0 0.--3. 1. "RCACHE,Read Cache Attributes" group.long 0x1F8020++0x7 line.long 0x0 "TCD63_SADDR,TCD Source Address Register" hexmask.long 0x0 0.--31. 1. "SADDR,Source Address bits[31:0]" line.long 0x4 "TCD63_SADDR_HIGH,TCD Source Address Register" hexmask.long 0x4 0.--31. 1. "SADDR,Source Address bits [63:32]" group.word 0x1F8028++0x3 line.word 0x0 "TCD63_SOFF,TCD Signed Source Address Offset Register" hexmask.word 0x0 0.--15. 1. "SOFF,Source address signed offset" line.word 0x2 "TCD63_ATTR,TCD Transfer Attributes Register" hexmask.word.byte 0x2 11.--15. 1. "SMOD,Source address modulo" bitfld.word 0x2 8.--10. "SSIZE,Source data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" newline hexmask.word.byte 0x2 3.--7. 1. "DMOD,Destination address modulo" bitfld.word 0x2 0.--2. "DSIZE,Destination data transfer size" "0: 8-bit,1: 16-bit,2: 32-bit,3: 64-bit,4: 16-byte,5: 32-byte,6: 64-byte,7: 128-byte" group.long 0x1F802C++0x3 line.long 0x0 "TCD63_NBYTES_MLOFFNO,TCD Transfer Size without Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long 0x0 0.--29. 1. "NBYTES,Number of Bytes to transfer per service request" group.long 0x1F802C++0x1B line.long 0x0 "TCD63_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets Register" bitfld.long 0x0 31. "SMLOE,Source Minor Loop Offset Enable" "0: The minor loop offset is not applied to the SADDR,1: The minor loop offset is applied to the SADDR" bitfld.long 0x0 30. "DMLOE,Destination Minor Loop Offset Enable" "0: The minor loop offset is not applied to the DADDR,1: The minor loop offset is applied to the DADDR" newline hexmask.long.tbyte 0x0 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x0 0.--9. 1. "NBYTES,Number of Bytes to transfer per service request" line.long 0x4 "TCD63_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x4 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[31:0]" line.long 0x8 "TCD63_SLAST_SDA_HIGH,TCD Last Source Address Adjustment / Store DADDR Address Register" hexmask.long 0x8 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address bits[63:32]" line.long 0xC "TCD63_DADDR,TCD Destination Address Register" hexmask.long 0xC 0.--31. 1. "DADDR,Destination Address" line.long 0x10 "TCD63_DADDR_HIGH,TCD Destination Address Register" hexmask.long 0x10 0.--31. 1. "DADDR,Destination Address" line.long 0x14 "TCD63_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x14 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" line.long 0x18 "TCD63_DLAST_SGA_HIGH,TCD Last Destination Address Adjustment / Scatter Gather Address Register" hexmask.long 0x18 0.--31. 1. "DLAST_SGA,Final Destination Address Adjustment / Scatter Gather Address" group.word 0x1F8048++0x3 line.word 0x0 "TCD63_DOFF,TCD Signed Destination Address Offset Register" hexmask.word 0x0 0.--15. 1. "DOFF,Destination Address Signed Offset" line.word 0x2 "TCD63_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x2 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x2 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F804A++0x5 line.word 0x0 "TCD63_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Minor Loop Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "CITER,Current Major Iteration Count" line.word 0x2 "TCD63_CSR,TCD Control and Status Register" bitfld.word 0x2 14.--15. "TMC,Transfer Mode Control" "0: Read/Write,1: Read Only,2: Write Only,?" hexmask.word.byte 0x2 8.--13. 1. "MAJORLINKCH,Major loop link channel number" newline bitfld.word 0x2 7. "ESDA,Enable store destination address" "0: The store destination address to system memory..,1: The store destination address to system memory.." bitfld.word 0x2 6. "EEOP,Enable end-of-packet processing" "0: The end-of-packet operation is disabled.,1: The end-of-packet hardware input signal is.." newline bitfld.word 0x2 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "0: The channel-to-channel linking is disabled.,1: The channel-to-channel linking is enabled." bitfld.word 0x2 4. "ESG,Enable Scatter/Gather processing" "0: The current channel's TCD is normal format.,1: The current channel's TCD specifies a scatter.." newline bitfld.word 0x2 3. "DREQ,Disable request" "0: No operation,1: Clear the ERQ bit upon major loop completion.." bitfld.word 0x2 2. "INTHALF,Enable an interrupt when major counter is half complete." "0: The half-point interrupt is disabled.,1: The half-point interrupt is enabled." newline bitfld.word 0x2 1. "INTMAJOR,Enable an interrupt when major iteration count completes." "0: The end-of-major loop interrupt is disabled.,1: The end-of-major loop interrupt is enabled." bitfld.word 0x2 0. "START,Channel Start" "0: The channel is not explicitly started.,1: The channel is explicitly started via a software.." line.word 0x4 "TCD63_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled) Register" bitfld.word 0x4 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word 0x4 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F804E++0x1 line.word 0x0 "TCD63_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled) Register" bitfld.word 0x0 15. "ELINK,Enables channel-to-channel linking on minor loop complete" "0: The channel-to-channel linking is disabled,1: The channel-to-channel linking is enabled" hexmask.word.byte 0x0 9.--14. 1. "LINKCH,Link Channel Number" newline hexmask.word 0x0 0.--8. 1. "BITER,Starting major iteration count" tree.end tree.end tree "WAKEUP_EIM" base ad:0x42780000 group.long 0x0++0x7 line.long 0x0 "EIMCR,Error Injection Module Configuration Register" bitfld.long 0x0 0. "GEIEN,Global Error Injection Enable" "0: Disabled,1: Enabled" line.long 0x4 "EICHEN,Error Injection Channel Enable register" bitfld.long 0x4 31. "EICH0EN,Error Injection Channel 0 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 30. "EICH1EN,Error Injection Channel 1 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 29. "EICH2EN,Error Injection Channel 2 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." bitfld.long 0x4 27. "EICH4EN,Error Injection Channel 4 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." newline bitfld.long 0x4 26. "EICH5EN,Error Injection Channel 5 Enable" "0: Error injection is disabled on Error Injection..,1: Error injection is enabled on Error Injection.." group.long 0x100++0xB line.long 0x0 "EICHD0_WORD0,Error Injection Channel Descriptor 0. Word0" hexmask.long.byte 0x0 24.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD0_WORD1,Error Injection Channel Descriptor 0. Word1" hexmask.long 0x4 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" line.long 0x8 "EICHD0_WORD2,Error Injection Channel Descriptor 0. Word2" hexmask.long 0x8 0.--31. 1. "B4_7DATA_MASK,Data Mask Bytes 4-7" group.long 0x140++0x7 line.long 0x0 "EICHD1_WORD0,Error Injection Channel Descriptor 1. Word0" hexmask.long.byte 0x0 24.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD1_WORD1,Error Injection Channel Descriptor 1. Word1" bitfld.long 0x4 0. "B0_3DATA_MASK,Data Mask Bytes 0-3" "0,1" group.long 0x180++0x7 line.long 0x0 "EICHD2_WORD0,Error Injection Channel Descriptor 2. Word0" hexmask.long.byte 0x0 24.--31. 1. "CHKBIT_MASK,Checkbit Mask" line.long 0x4 "EICHD2_WORD1,Error Injection Channel Descriptor 2. Word1" bitfld.long 0x4 0. "B0_3DATA_MASK,Data Mask Bytes 0-3" "0,1" group.long 0x204++0x3 line.long 0x0 "EICHD4_WORD1,Error Injection Channel Descriptor 4. Word1" hexmask.long 0x0 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" group.long 0x244++0x3 line.long 0x0 "EICHD5_WORD1,Error Injection Channel Descriptor 5. Word1" hexmask.long 0x0 0.--31. 1. "B0_3DATA_MASK,Data Mask Bytes 0-3" tree.end tree "WAKEUP_FLEXIO" tree "FLEXIO1" base ad:0x425C0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID Register" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "TRIGGER,Trigger Number" hexmask.long.byte 0x4 16.--23. 1. "PIN,Pin Number" newline hexmask.long.byte 0x4 8.--15. 1. "TIMER,Timer Number" hexmask.long.byte 0x4 0.--7. 1. "SHIFTER,Shifter Number" group.long 0x8++0x3 line.long 0x0 "CTRL,FLEXIO Control Register" bitfld.long 0x0 31. "DOZEN,Doze Enable" "0: FLEXIO enabled in Doze modes.,1: FLEXIO disabled in Doze modes." bitfld.long 0x0 30. "DBGE,Debug Enable" "0: FLEXIO is disabled in Debug modes.,1: FLEXIO is enabled in Debug modes." newline bitfld.long 0x0 2. "FASTACC,Fast Access" "0: Configures for normal register accesses to FLEXIO,1: Configures for fast register accesses to FLEXIO" bitfld.long 0x0 1. "SWRST,Software Reset" "0: Software reset is disabled,1: Software reset is enabled. All FLEXIO registers.." newline bitfld.long 0x0 0. "FLEXEN,FLEXIO Enable" "0: FLEXIO module is disabled.,1: FLEXIO module is enabled." rgroup.long 0xC++0x3 line.long 0x0 "PIN,Pin State Register" hexmask.long 0x0 0.--31. 1. "PDI,Pin Data Input" group.long 0x10++0xB line.long 0x0 "SHIFTSTAT,Shifter Status Register" hexmask.long.byte 0x0 0.--7. 1. "SSF,Shifter Status Flag" line.long 0x4 "SHIFTERR,Shifter Error Register" hexmask.long.byte 0x4 0.--7. 1. "SEF,Shifter Error Flags" line.long 0x8 "TIMSTAT,Timer Status Register" hexmask.long.byte 0x8 0.--7. 1. "TSF,Timer Status Flags" group.long 0x20++0xB line.long 0x0 "SHIFTSIEN,Shifter Status Interrupt Enable" hexmask.long.byte 0x0 0.--7. 1. "SSIE,Shifter Status Interrupt Enable" line.long 0x4 "SHIFTEIEN,Shifter Error Interrupt Enable" hexmask.long.byte 0x4 0.--7. 1. "SEIE,Shifter Error Interrupt Enable" line.long 0x8 "TIMIEN,Timer Interrupt Enable Register" hexmask.long.byte 0x8 0.--7. 1. "TEIE,Timer Status Interrupt Enable" group.long 0x30++0x3 line.long 0x0 "SHIFTSDEN,Shifter Status DMA Enable" hexmask.long.byte 0x0 0.--7. 1. "SSDE,Shifter Status DMA Enable" group.long 0x38++0x3 line.long 0x0 "TIMERSDEN,Timer Status DMA Enable" hexmask.long.byte 0x0 0.--7. 1. "TSDE,Timer Status DMA Enable" group.long 0x40++0x3 line.long 0x0 "SHIFTSTATE,Shifter State Register" bitfld.long 0x0 0.--2. "STATE,Current State Pointer" "0,1,2,3,4,5,6,7" group.long 0x48++0x2F line.long 0x0 "TRGSTAT,Trigger Status Register" hexmask.long.byte 0x0 0.--3. 1. "ETSF,External Trigger Status Flags" line.long 0x4 "TRIGIEN,External Trigger Interrupt Enable Register" hexmask.long.byte 0x4 0.--3. 1. "TRIE,External Trigger Interrupt Enable" line.long 0x8 "PINSTAT,Pin Status Register" hexmask.long 0x8 0.--31. 1. "PSF,Pin Status Flags" line.long 0xC "PINIEN,Pin Interrupt Enable Register" hexmask.long 0xC 0.--31. 1. "PSIE,Pin Status Interrupt Enable" line.long 0x10 "PINREN,Pin Rising Edge Enable Register" hexmask.long 0x10 0.--31. 1. "PRE,Pin Rising Edge" line.long 0x14 "PINFEN,Pin Falling Edge Enable Register" hexmask.long 0x14 0.--31. 1. "PFE,Pin Falling Edge" line.long 0x18 "PINOUTD,Pin Output Data Register" hexmask.long 0x18 0.--31. 1. "OUTD,Output Data" line.long 0x1C "PINOUTE,Pin Output Enable Register" hexmask.long 0x1C 0.--31. 1. "OUTE,Output Enable" line.long 0x20 "PINOUTDIS,Pin Output Disable Register" hexmask.long 0x20 0.--31. 1. "OUTDIS,Output Disable" line.long 0x24 "PINOUTCLR,Pin Output Clear Register" hexmask.long 0x24 0.--31. 1. "OUTCLR,Output Clear" line.long 0x28 "PINOUTSET,Pin Output Set Register" hexmask.long 0x28 0.--31. 1. "OUTSET,Output Set" line.long 0x2C "PINOUTTOG,Pin Output Toggle Register" hexmask.long 0x2C 0.--31. 1. "OUTTOG,Output Toggle" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x80)++0x3 line.long 0x0 "SHIFTCTL[$1],Shifter Control N Register" bitfld.long 0x0 24.--26. "TIMSEL,Timer Select" "0,1,2,3,4,5,6,7" bitfld.long 0x0 23. "TIMPOL,Timer Polarity" "0: Shift on posedge of shift clock,1: Shift on negedge of shift clock" newline bitfld.long 0x0 16.--17. "PINCFG,Shifter Pin Configuration" "0: Shifter pin output disabled,1: Shifter pin open-drain or bidirectional output..,2: Shifter pin bidirectional output data,3: Shifter pin output" hexmask.long.byte 0x0 8.--12. 1. "PINSEL,Shifter Pin Select" newline bitfld.long 0x0 7. "PINPOL,Shifter Pin Polarity" "0: Pin is active high,1: Pin is active low" bitfld.long 0x0 0.--2. "SMOD,Shifter Mode" "0: Disabled.,1: Receive mode. Captures the current shifter..,2: Transmit mode. Load SHIFTBUF contents into the..,?,4: Match Store mode. Shifter data is compared to..,5: Match Continuous mode. Shifter data is..,6: State mode. SHIFTBUF contents are used for..,7: Logic mode. SHIFTBUF contents are used for.." repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "SHIFTCFG[$1],Shifter Configuration N Register" hexmask.long.byte 0x0 16.--20. 1. "PWIDTH,Parallel Width" bitfld.long 0x0 12. "SSIZE,Shifter Size" "0: Shift register is 32-bit.,1: Shift register is 24-bit." newline bitfld.long 0x0 9. "LATST,Late Store" "0: Shift register stores the pre-shift register..,1: Shift register stores the post-shift register.." bitfld.long 0x0 8. "INSRC,Input Source" "0: Pin,1: Shifter N+1 Output" newline bitfld.long 0x0 4.--5. "SSTOP,Shifter Stop bit" "0: Stop bit disabled for transmitter/receiver/match..,1: Stop bit disabled for transmitter/receiver/match..,2: Transmitter outputs stop bit value 0 on store.,3: Transmitter outputs stop bit value 1 on store." bitfld.long 0x0 0.--1. "SSTART,Shifter Start Bit" "0: Start bit disabled for..,1: Start bit disabled for..,2: Transmitter outputs start bit value 0 before..,3: Transmitter outputs start bit value 1 before.." repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "SHIFTBUF[$1],Shifter Buffer N Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUF,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x280)++0x3 line.long 0x0 "SHIFTBUFBIS[$1],Shifter Buffer N Bit Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFBIS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x300)++0x3 line.long 0x0 "SHIFTBUFBYS[$1],Shifter Buffer N Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFBYS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x380)++0x3 line.long 0x0 "SHIFTBUFBBS[$1],Shifter Buffer N Bit Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFBBS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x400)++0x3 line.long 0x0 "TIMCTL[$1],Timer Control N Register" hexmask.long.byte 0x0 24.--29. 1. "TRGSEL,Trigger Select" bitfld.long 0x0 23. "TRGPOL,Trigger Polarity" "0: Trigger active high,1: Trigger active low" newline bitfld.long 0x0 22. "TRGSRC,Trigger Source" "0: External trigger selected,1: Internal trigger selected" bitfld.long 0x0 16.--17. "PINCFG,Timer Pin Configuration" "0: Timer pin output disabled,1: Timer pin open-drain or bidirectional output..,2: Timer pin bidirectional output data,3: Timer pin output" newline hexmask.long.byte 0x0 8.--12. 1. "PINSEL,Timer Pin Select" bitfld.long 0x0 7. "PINPOL,Timer Pin Polarity" "0: Pin is active high,1: Pin is active low" newline bitfld.long 0x0 6. "PININS,Timer Pin Input Select" "0: Timer pin input and output are selected by PINSEL.,1: Timer pin input is selected by PINSEL+1. Timer.." bitfld.long 0x0 5. "ONETIM,Timer One Time Operation" "0: The timer enable event is generated as normal.,1: The timer enable event is blocked unless timer.." newline bitfld.long 0x0 0.--2. "TIMOD,Timer Mode" "0: Timer disabled.,1: Dual 8-bit counters baud mode.,2: Dual 8-bit counters PWM high mode.,3: Single 16-bit counter mode.,4: Single 16-bit counter disable mode.,5: Dual 8-bit counters word mode.,6: Dual 8-bit counters PWM low mode.,7: Single 16-bit input capture mode." repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x480)++0x3 line.long 0x0 "TIMCFG[$1],Timer Configuration N Register" bitfld.long 0x0 24.--25. "TIMOUT,Timer Output" "0: Timer output is logic one when enabled and is..,1: Timer output is logic zero when enabled and is..,2: Timer output is logic one when enabled and on..,3: Timer output is logic zero when enabled and on.." bitfld.long 0x0 20.--22. "TIMDEC,Timer Decrement" "0: Decrement counter on FLEXIO clock. Shift clock..,1: Decrement counter on trigger input (both edges).,2: Decrement counter on pin input (both edges).,3: Decrement counter on trigger input (both edges).,4: Decrement counter on FLEXIO clock divided by 16.,5: Decrement counter on FLEXIO clock divided by..,6: Decrement counter on pin input (rising edge).,7: Decrement counter on trigger input (rising.." newline bitfld.long 0x0 16.--18. "TIMRST,Timer Reset" "0: Timer never reset,1: Timer reset on timer output high.,2: Timer reset on timer pin equal to timer output,3: Timer reset on timer trigger equal to timer output,4: Timer reset on timer pin rising edge,?,6: Timer reset on trigger rising edge,7: Timer reset on trigger rising or falling edge" bitfld.long 0x0 12.--14. "TIMDIS,Timer Disable" "0: Timer never disabled,1: Timer disabled on Timer N-1 disable,2: Timer disabled on timer compare (upper 8-bits..,3: Timer disabled on timer compare (upper 8-bits..,4: Timer disabled on pin rising or falling edge,5: Timer disabled on pin rising or falling edge..,6: Timer disabled on trigger falling edge,?" newline bitfld.long 0x0 8.--10. "TIMENA,Timer Enable" "0: Timer always enabled,1: Timer enabled on Timer N-1 enable,2: Timer enabled on Trigger high,3: Timer enabled on Trigger high and Pin high,4: Timer enabled on Pin rising edge,5: Timer enabled on Pin rising edge and Trigger high,6: Timer enabled on Trigger rising edge,7: Timer enabled on Trigger rising or falling edge" bitfld.long 0x0 4.--5. "TSTOP,Timer Stop Bit" "0: Stop bit disabled,1: Stop bit is enabled on timer compare,2: Stop bit is enabled on timer disable,3: Stop bit is enabled on timer compare and timer.." newline bitfld.long 0x0 1. "TSTART,Timer Start Bit" "0: Start bit disabled,1: Start bit enabled" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x500)++0x3 line.long 0x0 "TIMCMP[$1],Timer Compare N Register" hexmask.long.word 0x0 0.--15. 1. "CMP,Timer Compare Value" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x680)++0x3 line.long 0x0 "SHIFTBUFNBS[$1],Shifter Buffer N Nibble Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFNBS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x700)++0x3 line.long 0x0 "SHIFTBUFHWS[$1],Shifter Buffer N Halfword Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFHWS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x780)++0x3 line.long 0x0 "SHIFTBUFNIS[$1],Shifter Buffer N Nibble Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFNIS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x800)++0x3 line.long 0x0 "SHIFTBUFOES[$1],Shifter Buffer N Odd Even Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFOES,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "SHIFTBUFEOS[$1],Shifter Buffer N Even Odd Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFEOS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x900)++0x3 line.long 0x0 "SHIFTBUFHBS[$1],Shifter Buffer N Halfword Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFHBS,Shift Buffer" repeat.end tree.end tree "FLEXIO2" base ad:0x425D0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID Register" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter Register" hexmask.long.byte 0x4 24.--31. 1. "TRIGGER,Trigger Number" hexmask.long.byte 0x4 16.--23. 1. "PIN,Pin Number" newline hexmask.long.byte 0x4 8.--15. 1. "TIMER,Timer Number" hexmask.long.byte 0x4 0.--7. 1. "SHIFTER,Shifter Number" group.long 0x8++0x3 line.long 0x0 "CTRL,FLEXIO Control Register" bitfld.long 0x0 31. "DOZEN,Doze Enable" "0: FLEXIO enabled in Doze modes.,1: FLEXIO disabled in Doze modes." bitfld.long 0x0 30. "DBGE,Debug Enable" "0: FLEXIO is disabled in Debug modes.,1: FLEXIO is enabled in Debug modes." newline bitfld.long 0x0 2. "FASTACC,Fast Access" "0: Configures for normal register accesses to FLEXIO,1: Configures for fast register accesses to FLEXIO" bitfld.long 0x0 1. "SWRST,Software Reset" "0: Software reset is disabled,1: Software reset is enabled. All FLEXIO registers.." newline bitfld.long 0x0 0. "FLEXEN,FLEXIO Enable" "0: FLEXIO module is disabled.,1: FLEXIO module is enabled." rgroup.long 0xC++0x3 line.long 0x0 "PIN,Pin State Register" hexmask.long 0x0 0.--31. 1. "PDI,Pin Data Input" group.long 0x10++0xB line.long 0x0 "SHIFTSTAT,Shifter Status Register" hexmask.long.byte 0x0 0.--7. 1. "SSF,Shifter Status Flag" line.long 0x4 "SHIFTERR,Shifter Error Register" hexmask.long.byte 0x4 0.--7. 1. "SEF,Shifter Error Flags" line.long 0x8 "TIMSTAT,Timer Status Register" hexmask.long.byte 0x8 0.--7. 1. "TSF,Timer Status Flags" group.long 0x20++0xB line.long 0x0 "SHIFTSIEN,Shifter Status Interrupt Enable" hexmask.long.byte 0x0 0.--7. 1. "SSIE,Shifter Status Interrupt Enable" line.long 0x4 "SHIFTEIEN,Shifter Error Interrupt Enable" hexmask.long.byte 0x4 0.--7. 1. "SEIE,Shifter Error Interrupt Enable" line.long 0x8 "TIMIEN,Timer Interrupt Enable Register" hexmask.long.byte 0x8 0.--7. 1. "TEIE,Timer Status Interrupt Enable" group.long 0x30++0x3 line.long 0x0 "SHIFTSDEN,Shifter Status DMA Enable" hexmask.long.byte 0x0 0.--7. 1. "SSDE,Shifter Status DMA Enable" group.long 0x38++0x3 line.long 0x0 "TIMERSDEN,Timer Status DMA Enable" hexmask.long.byte 0x0 0.--7. 1. "TSDE,Timer Status DMA Enable" group.long 0x40++0x3 line.long 0x0 "SHIFTSTATE,Shifter State Register" bitfld.long 0x0 0.--2. "STATE,Current State Pointer" "0,1,2,3,4,5,6,7" group.long 0x48++0x2F line.long 0x0 "TRGSTAT,Trigger Status Register" hexmask.long.byte 0x0 0.--3. 1. "ETSF,External Trigger Status Flags" line.long 0x4 "TRIGIEN,External Trigger Interrupt Enable Register" hexmask.long.byte 0x4 0.--3. 1. "TRIE,External Trigger Interrupt Enable" line.long 0x8 "PINSTAT,Pin Status Register" hexmask.long 0x8 0.--31. 1. "PSF,Pin Status Flags" line.long 0xC "PINIEN,Pin Interrupt Enable Register" hexmask.long 0xC 0.--31. 1. "PSIE,Pin Status Interrupt Enable" line.long 0x10 "PINREN,Pin Rising Edge Enable Register" hexmask.long 0x10 0.--31. 1. "PRE,Pin Rising Edge" line.long 0x14 "PINFEN,Pin Falling Edge Enable Register" hexmask.long 0x14 0.--31. 1. "PFE,Pin Falling Edge" line.long 0x18 "PINOUTD,Pin Output Data Register" hexmask.long 0x18 0.--31. 1. "OUTD,Output Data" line.long 0x1C "PINOUTE,Pin Output Enable Register" hexmask.long 0x1C 0.--31. 1. "OUTE,Output Enable" line.long 0x20 "PINOUTDIS,Pin Output Disable Register" hexmask.long 0x20 0.--31. 1. "OUTDIS,Output Disable" line.long 0x24 "PINOUTCLR,Pin Output Clear Register" hexmask.long 0x24 0.--31. 1. "OUTCLR,Output Clear" line.long 0x28 "PINOUTSET,Pin Output Set Register" hexmask.long 0x28 0.--31. 1. "OUTSET,Output Set" line.long 0x2C "PINOUTTOG,Pin Output Toggle Register" hexmask.long 0x2C 0.--31. 1. "OUTTOG,Output Toggle" repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x80)++0x3 line.long 0x0 "SHIFTCTL[$1],Shifter Control N Register" bitfld.long 0x0 24.--26. "TIMSEL,Timer Select" "0,1,2,3,4,5,6,7" bitfld.long 0x0 23. "TIMPOL,Timer Polarity" "0: Shift on posedge of shift clock,1: Shift on negedge of shift clock" newline bitfld.long 0x0 16.--17. "PINCFG,Shifter Pin Configuration" "0: Shifter pin output disabled,1: Shifter pin open-drain or bidirectional output..,2: Shifter pin bidirectional output data,3: Shifter pin output" hexmask.long.byte 0x0 8.--12. 1. "PINSEL,Shifter Pin Select" newline bitfld.long 0x0 7. "PINPOL,Shifter Pin Polarity" "0: Pin is active high,1: Pin is active low" bitfld.long 0x0 0.--2. "SMOD,Shifter Mode" "0: Disabled.,1: Receive mode. Captures the current shifter..,2: Transmit mode. Load SHIFTBUF contents into the..,?,4: Match Store mode. Shifter data is compared to..,5: Match Continuous mode. Shifter data is..,6: State mode. SHIFTBUF contents are used for..,7: Logic mode. SHIFTBUF contents are used for.." repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "SHIFTCFG[$1],Shifter Configuration N Register" hexmask.long.byte 0x0 16.--20. 1. "PWIDTH,Parallel Width" bitfld.long 0x0 12. "SSIZE,Shifter Size" "0: Shift register is 32-bit.,1: Shift register is 24-bit." newline bitfld.long 0x0 9. "LATST,Late Store" "0: Shift register stores the pre-shift register..,1: Shift register stores the post-shift register.." bitfld.long 0x0 8. "INSRC,Input Source" "0: Pin,1: Shifter N+1 Output" newline bitfld.long 0x0 4.--5. "SSTOP,Shifter Stop bit" "0: Stop bit disabled for transmitter/receiver/match..,1: Stop bit disabled for transmitter/receiver/match..,2: Transmitter outputs stop bit value 0 on store.,3: Transmitter outputs stop bit value 1 on store." bitfld.long 0x0 0.--1. "SSTART,Shifter Start Bit" "0: Start bit disabled for..,1: Start bit disabled for..,2: Transmitter outputs start bit value 0 before..,3: Transmitter outputs start bit value 1 before.." repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "SHIFTBUF[$1],Shifter Buffer N Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUF,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x280)++0x3 line.long 0x0 "SHIFTBUFBIS[$1],Shifter Buffer N Bit Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFBIS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x300)++0x3 line.long 0x0 "SHIFTBUFBYS[$1],Shifter Buffer N Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFBYS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x380)++0x3 line.long 0x0 "SHIFTBUFBBS[$1],Shifter Buffer N Bit Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFBBS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x400)++0x3 line.long 0x0 "TIMCTL[$1],Timer Control N Register" hexmask.long.byte 0x0 24.--29. 1. "TRGSEL,Trigger Select" bitfld.long 0x0 23. "TRGPOL,Trigger Polarity" "0: Trigger active high,1: Trigger active low" newline bitfld.long 0x0 22. "TRGSRC,Trigger Source" "0: External trigger selected,1: Internal trigger selected" bitfld.long 0x0 16.--17. "PINCFG,Timer Pin Configuration" "0: Timer pin output disabled,1: Timer pin open-drain or bidirectional output..,2: Timer pin bidirectional output data,3: Timer pin output" newline hexmask.long.byte 0x0 8.--12. 1. "PINSEL,Timer Pin Select" bitfld.long 0x0 7. "PINPOL,Timer Pin Polarity" "0: Pin is active high,1: Pin is active low" newline bitfld.long 0x0 6. "PININS,Timer Pin Input Select" "0: Timer pin input and output are selected by PINSEL.,1: Timer pin input is selected by PINSEL+1. Timer.." bitfld.long 0x0 5. "ONETIM,Timer One Time Operation" "0: The timer enable event is generated as normal.,1: The timer enable event is blocked unless timer.." newline bitfld.long 0x0 0.--2. "TIMOD,Timer Mode" "0: Timer disabled.,1: Dual 8-bit counters baud mode.,2: Dual 8-bit counters PWM high mode.,3: Single 16-bit counter mode.,4: Single 16-bit counter disable mode.,5: Dual 8-bit counters word mode.,6: Dual 8-bit counters PWM low mode.,7: Single 16-bit input capture mode." repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x480)++0x3 line.long 0x0 "TIMCFG[$1],Timer Configuration N Register" bitfld.long 0x0 24.--25. "TIMOUT,Timer Output" "0: Timer output is logic one when enabled and is..,1: Timer output is logic zero when enabled and is..,2: Timer output is logic one when enabled and on..,3: Timer output is logic zero when enabled and on.." bitfld.long 0x0 20.--22. "TIMDEC,Timer Decrement" "0: Decrement counter on FLEXIO clock. Shift clock..,1: Decrement counter on trigger input (both edges).,2: Decrement counter on pin input (both edges).,3: Decrement counter on trigger input (both edges).,4: Decrement counter on FLEXIO clock divided by 16.,5: Decrement counter on FLEXIO clock divided by..,6: Decrement counter on pin input (rising edge).,7: Decrement counter on trigger input (rising.." newline bitfld.long 0x0 16.--18. "TIMRST,Timer Reset" "0: Timer never reset,1: Timer reset on timer output high.,2: Timer reset on timer pin equal to timer output,3: Timer reset on timer trigger equal to timer output,4: Timer reset on timer pin rising edge,?,6: Timer reset on trigger rising edge,7: Timer reset on trigger rising or falling edge" bitfld.long 0x0 12.--14. "TIMDIS,Timer Disable" "0: Timer never disabled,1: Timer disabled on Timer N-1 disable,2: Timer disabled on timer compare (upper 8-bits..,3: Timer disabled on timer compare (upper 8-bits..,4: Timer disabled on pin rising or falling edge,5: Timer disabled on pin rising or falling edge..,6: Timer disabled on trigger falling edge,?" newline bitfld.long 0x0 8.--10. "TIMENA,Timer Enable" "0: Timer always enabled,1: Timer enabled on Timer N-1 enable,2: Timer enabled on Trigger high,3: Timer enabled on Trigger high and Pin high,4: Timer enabled on Pin rising edge,5: Timer enabled on Pin rising edge and Trigger high,6: Timer enabled on Trigger rising edge,7: Timer enabled on Trigger rising or falling edge" bitfld.long 0x0 4.--5. "TSTOP,Timer Stop Bit" "0: Stop bit disabled,1: Stop bit is enabled on timer compare,2: Stop bit is enabled on timer disable,3: Stop bit is enabled on timer compare and timer.." newline bitfld.long 0x0 1. "TSTART,Timer Start Bit" "0: Start bit disabled,1: Start bit enabled" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x500)++0x3 line.long 0x0 "TIMCMP[$1],Timer Compare N Register" hexmask.long.word 0x0 0.--15. 1. "CMP,Timer Compare Value" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x680)++0x3 line.long 0x0 "SHIFTBUFNBS[$1],Shifter Buffer N Nibble Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFNBS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x700)++0x3 line.long 0x0 "SHIFTBUFHWS[$1],Shifter Buffer N Halfword Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFHWS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x780)++0x3 line.long 0x0 "SHIFTBUFNIS[$1],Shifter Buffer N Nibble Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFNIS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x800)++0x3 line.long 0x0 "SHIFTBUFOES[$1],Shifter Buffer N Odd Even Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFOES,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x880)++0x3 line.long 0x0 "SHIFTBUFEOS[$1],Shifter Buffer N Even Odd Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFEOS,Shift Buffer" repeat.end repeat 8. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x900)++0x3 line.long 0x0 "SHIFTBUFHBS[$1],Shifter Buffer N Halfword Byte Swapped Register" hexmask.long 0x0 0.--31. 1. "SHIFTBUFHBS,Shift Buffer" repeat.end tree.end tree.end tree "WAKEUP_FLEXSPI" base ad:0x425E0000 group.long 0x0++0x3F line.long 0x0 "MCR0,Module Control 0" hexmask.long.byte 0x0 24.--31. 1. "AHBGRANTWAIT,Timeouts Wait Cycle for AHB command Grant" newline hexmask.long.byte 0x0 16.--23. 1. "IPGRANTWAIT,Timeout Wait Cycle for IP Command Grant" newline bitfld.long 0x0 15. "LEARNEN,Data Learning Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 14. "SCKFREERUNEN,SCLK Free-running Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 12. "DOZEEN,Doze Mode Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 11. "HSEN,Half Speed Serial Flash Memory Access Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 8.--10. "SERCLKDIV,Serial Root Clock Divider" "0: Divided by 1,1: Divided by 2,2: Divided by 3,3: Divided by 4,4: Divided by 5,5: Divided by 6,6: Divided by 7,7: Divided by 8" newline bitfld.long 0x0 4.--5. "RXCLKSRC,Sample Clock Source for Flash Reading" "0: Dummy Read strobe that FlexSPI generates looped..,1: Dummy Read strobe that FlexSPI generates looped..,?,3: Flash-memory-provided read strobe and input from.." newline bitfld.long 0x0 1. "MDIS,Module Disable" "0: No impact,1: Module disable" newline bitfld.long 0x0 0. "SWRESET,Software Reset" "0: No impact,1: Software reset" line.long 0x4 "MCR1,Module Control 1" hexmask.long.word 0x4 16.--31. 1. "SEQWAIT,Command Sequence Wait" newline hexmask.long.word 0x4 0.--15. 1. "AHBBUSWAIT,AHB Bus Wait" line.long 0x8 "MCR2,Module Control 2" hexmask.long.byte 0x8 24.--31. 1. "RESUMEWAIT,Resume Wait Duration" newline bitfld.long 0x8 19. "SCKBDIFFOPT,SCLK Port B Differential Output" "0: Use B_SCLK pad as port B SCLK clock output. Port..,1: Use B_SCLK pad as port A SCLK inverted clock.." newline bitfld.long 0x8 15. "SAMEDEVICEEN,Same Device Enable" "0: In Individual mode FLSHA1CRx and FLSHA2CRx..,1: FLSHA1CR0 FLSHA1CR1 and FLSHA1CR2 register.." newline bitfld.long 0x8 14. "CLRLEARNPHASE,Clear Learn Phase Selection" "0: No impact,1: Reset sample clock phase selection to 0" newline bitfld.long 0x8 11. "CLRAHBBUFOPT,Clear AHB Buffer" "0: Not cleared automatically,1: Cleared automatically" line.long 0xC "AHBCR,AHB Bus Control" bitfld.long 0xC 20.--21. "ALIGNMENT,AHB Boundary Alignment" "0: No limit,1: 1 KB,2: 512 bytes,3: 256 bytes" newline bitfld.long 0xC 10. "READSZALIGN,AHB Read Size Alignment" "0: Register settings such as PREFETCH_EN and..,1: AHB read size to up size to 8 bytes aligned no.." newline bitfld.long 0xC 7. "RESUMEDISABLE,AHB Read Resume Disable" "0: Suspended AHB read prefetch resumes when AHB is..,1: Suspended AHB read prefetch does not resume once.." newline bitfld.long 0xC 6. "READADDROPT,AHB Read Address Option" "0: AHB read burst start address alignment is..,1: AHB read burst start address alignment is not.." newline bitfld.long 0xC 5. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 4. "BUFFERABLEEN,Bufferable Write Access Enable" "0: Disabled. For all AHB write accesses (bufferable..,1: Enabled. For AHB bufferable write access FlexSPI.." newline bitfld.long 0xC 3. "CACHABLEEN,Cacheable Read Access Enable" "0: Disabled. When an AHB bus cacheable read access..,1: Enabled. When an AHB bus cacheable read access.." newline bitfld.long 0xC 2. "CLRAHBTXBUF,Clear AHB Transmit Buffer" "0: No impact.,1: Enable clear operation." newline bitfld.long 0xC 0. "APAREN,AHB Parallel Mode Enable" "0: Flash is accessed in Individual mode.,1: Flash is accessed in Parallel mode." line.long 0x10 "INTEN,Interrupt Enable" bitfld.long 0x10 13. "KEYERROREN,OTFAD Key Blob Processing Error Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 12. "KEYDONEEN,OTFAD Key Blob Processing Done Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 11. "SEQTIMEOUTEN,Sequence execution Timeout Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 10. "AHBBUSERROREN,AHB Bus Error Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 9. "SCKSTOPBYWREN,SCLK Stopped By Write Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 8. "SCKSTOPBYRDEN,SCLK Stopped By Read Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 7. "DATALEARNFAILEN,Data Learning Failed Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 6. "IPTXWEEN,IP Transmit FIFO Watermark Empty Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 5. "IPRXWAEN,IP Receive FIFO Watermark Available Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 4. "AHBCMDERREN,AHB-Triggered Command Sequences Error Detected Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 3. "IPCMDERREN,IP-Triggered Command Sequences Error Detected Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 2. "AHBCMDGEEN,AHB-Triggered Command Sequences Grant Timeout Interrupt Enable." "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 1. "IPCMDGEEN,IP-Triggered Command Sequences Grant Timeout Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" newline bitfld.long 0x10 0. "IPCMDDONEEN,IP-Triggered Command Sequences Execution Finished Interrupt Enable" "0: Disable interrupt or no impact,1: Enable interrupt" line.long 0x14 "INTR,Interrupt" rbitfld.long 0x14 13. "KEYERROR,OTFAD Key Blob Processing Error" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 12. "KEYDONE,OTFAD key blob processing done interrupt." "0,1" newline eventfld.long 0x14 11. "SEQTIMEOUT,Sequence Execution Timeout" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 10. "AHBBUSERROR,AHB Bus Error" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 9. "SCKSTOPBYWR,SCLK Stopped Due To Empty Transmit FIFO" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 8. "SCKSTOPBYRD,SCLK Stopped Due To Full Receive FIFO" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 7. "DATALEARNFAIL,Data Learning Failed" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 6. "IPTXWE,IP Transmit FIFO Watermark Empty" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 5. "IPRXWA,IP Receive FIFO Watermark Available" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 4. "AHBCMDERR,AHB-Triggered Command Sequences Error" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 3. "IPCMDERR,IP-Triggered Command Sequences Error" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 2. "AHBCMDGE,AHB-Triggered Command Sequences Grant Timeout" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 1. "IPCMDGE,IP-Triggered Command Sequences Grant Timeout" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" newline eventfld.long 0x14 0. "IPCMDDONE,IP-Triggered Command Sequences Execution Finished" "0: Interrupt condition has not occurred,1: Interrupt condition has occurred" line.long 0x18 "LUTKEY,LUT Key" hexmask.long 0x18 0.--31. 1. "KEY,LUT Key" line.long 0x1C "LUTCR,LUT Control" bitfld.long 0x1C 1. "UNLOCK,Unlock LUT" "0: LUT is locked (LUTCR[LOCK] must be 1),1: LUT is unlocked and can be written" newline bitfld.long 0x1C 0. "LOCK,Lock LUT" "0: LUT is unlocked (LUTCR[UNLOCK] must be 1),1: LUT is locked and cannot be written" line.long 0x20 "AHBRXBUF0CR0,AHB Receive Buffer 0 Control 0" bitfld.long 0x20 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x20 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x20 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x20 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x20 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x24 "AHBRXBUF1CR0,AHB Receive Buffer 1 Control 0" bitfld.long 0x24 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x24 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x24 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x24 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x24 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x28 "AHBRXBUF2CR0,AHB Receive Buffer 2 Control 0" bitfld.long 0x28 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x28 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x28 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x28 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x28 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x2C "AHBRXBUF3CR0,AHB Receive Buffer 3 Control 0" bitfld.long 0x2C 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x2C 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x2C 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x2C 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x2C 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x30 "AHBRXBUF4CR0,AHB Receive Buffer 4 Control 0" bitfld.long 0x30 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x30 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x30 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x30 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x30 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x34 "AHBRXBUF5CR0,AHB Receive Buffer 5 Control 0" bitfld.long 0x34 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x34 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x34 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x34 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x34 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x38 "AHBRXBUF6CR0,AHB Receive Buffer 6 Control 0" bitfld.long 0x38 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x38 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x38 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x38 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x38 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" line.long 0x3C "AHBRXBUF7CR0,AHB Receive Buffer 7 Control 0" bitfld.long 0x3C 31. "PREFETCHEN,AHB Read Prefetch Enable" "0: Disabled,1: Enabled when is enabled." newline bitfld.long 0x3C 30. "REGIONEN,AHB Receive Buffer Address Region Enable" "0: Disabled. The buffer hit is based on the value..,1: Enabled. The buffer hit is based on the value of.." newline bitfld.long 0x3C 24.--26. "PRIORITY,AHB Controller Read Priority" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x3C 16.--19. 1. "MSTRID,AHB Controller ID" newline hexmask.long.word 0x3C 0.--8. 1. "BUFSZ,AHB Receive Buffer Size" group.long 0x60++0xF line.long 0x0 "FLSHA1CR0,Flash Control 0" hexmask.long.tbyte 0x0 0.--22. 1. "FLSHSZ,Flash Size in KB" line.long 0x4 "FLSHA2CR0,Flash Control 0" hexmask.long.tbyte 0x4 0.--22. 1. "FLSHSZ,Flash Size in KB" line.long 0x8 "FLSHB1CR0,Flash Control 0" hexmask.long.tbyte 0x8 0.--22. 1. "FLSHSZ,Flash Size in KB" line.long 0xC "FLSHB2CR0,Flash Control 0" hexmask.long.tbyte 0xC 0.--22. 1. "FLSHSZ,Flash Size in KB" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x70)++0x3 line.long 0x0 "FLSHCR1$1,Flash Control 1" hexmask.long.word 0x0 16.--31. 1. "CSINTERVAL,Chip Select Interval" newline bitfld.long 0x0 15. "CSINTERVALUNIT,Chip Select Interval Unit" "0: 1 serial clock cycle,1: 256 serial clock cycles" newline hexmask.long.byte 0x0 11.--14. 1. "CAS,Column Address Size" newline bitfld.long 0x0 10. "WA,Word-Addressable" "0: Byte-addressable,1: Word-addressable" newline hexmask.long.byte 0x0 5.--9. 1. "TCSH,Serial Flash CS Hold Time" newline hexmask.long.byte 0x0 0.--4. 1. "TCSS,Serial Flash CS Setup Time" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x80)++0x3 line.long 0x0 "FLSHCR2$1,Flash Control 2" bitfld.long 0x0 31. "CLRINSTRPTR,Clear Instruction Pointer" "0,1" newline bitfld.long 0x0 28.--30. "AWRWAITUNIT,AWRWAIT Unit" "0: 2,1: 8,2: 32,3: 128,4: 512,5: 2048,6: 8192,7: 32768" newline hexmask.long.word 0x0 16.--27. 1. "AWRWAIT,AHB Write Wait" newline bitfld.long 0x0 13.--15. "AWRSEQNUM,Sequence Number for AHB Write-Triggered Command" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 8.--12. 1. "AWRSEQID,Sequence Index for AHB Write-Triggered Command" newline bitfld.long 0x0 5.--7. "ARDSEQNUM,Sequence Number for AHB Read-Triggered Command" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 0.--4. 1. "ARDSEQID,Sequence Index for AHB Read-Triggered Command in LUT" repeat.end group.long 0x94++0x3 line.long 0x0 "FLSHCR4,Flash Control 4" bitfld.long 0x0 3. "WMENB,Write Mask Enable for Port B" "0: Disabled. When writing to external device..,1: Enabled. When writing to external device FlexSPI.." newline bitfld.long 0x0 2. "WMENA,Write Mask Enable for Port A" "0: Disabled. When writing to external device..,1: Enabled. When writing to external device FlexSPI.." newline bitfld.long 0x0 0. "WMOPT1,Write Mask Option 1" "0: When writing to an external device DQS pin is..,1: When writing to an external device DQS pin is.." group.long 0xA0++0x7 line.long 0x0 "IPCR0,IP Control 0" hexmask.long 0x0 0.--31. 1. "SFAR,Serial Flash Address" line.long 0x4 "IPCR1,IP Control 1" bitfld.long 0x4 31. "IPAREN,Parallel Mode Enable for IP Commands" "0: Disabled. Flash memory is accessed in Individual..,1: Enabled. Flash memory is accessed in Parallel.." newline bitfld.long 0x4 24.--26. "ISEQNUM,Sequence Number for IP command: ISEQNUM+1." "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x4 16.--20. 1. "ISEQID,Sequence Index in LUT for IP command." newline hexmask.long.word 0x4 0.--15. 1. "IDATSZ,Flash Read/Program Data Size (in bytes) for IP command." group.long 0xB0++0xF line.long 0x0 "IPCMD,IP Command" bitfld.long 0x0 0. "TRG,Command Trigger" "0: No action,1: Start the IP command that the IPCR0 and IPCR1.." line.long 0x4 "DLPR,Data Learning Pattern" hexmask.long 0x4 0.--31. 1. "DLP,Data Learning Pattern" line.long 0x8 "IPRXFCR,IP Receive FIFO Control" hexmask.long.byte 0x8 2.--7. 1. "RXWMRK,IP Receive FIFO Watermark Level" newline bitfld.long 0x8 1. "RXDMAEN,IP Receive FIFO Reading by DMA Enable" "0: Disabled. The processor reads the FIFO.,1: Enabled. DMA reads the FIFO." newline bitfld.long 0x8 0. "CLRIPRXF,Clear IP Receive FIFO" "0: No function,1: A clock cycle pulse clears all valid data.." line.long 0xC "IPTXFCR,IP Transmit FIFO Control" hexmask.long.byte 0xC 2.--8. 1. "TXWMRK,Transmit Watermark Level" newline bitfld.long 0xC 1. "TXDMAEN,Transmit FIFO DMA Enable" "0: Processor,1: DMA" newline bitfld.long 0xC 0. "CLRIPTXF,Clear IP Transmit FIFO" "0: No function,1: A clock cycle pulse clears all valid data.." repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xC0)++0x3 line.long 0x0 "DLLCR$1,DLL Control 0" hexmask.long.byte 0x0 9.--14. 1. "OVRDVAL,Target Clock Delay Line Override Value" newline bitfld.long 0x0 8. "OVRDEN,Target Clock Delay Line Override Value Enable" "0: Disable,1: Enable" newline hexmask.long.byte 0x0 3.--6. 1. "SLVDLYTARGET,Target Delay Line For Target" newline bitfld.long 0x0 1. "DLLRESET,DLL reset" "0: No function,1: Force DLL reset." newline bitfld.long 0x0 0. "DLLEN,DLL Calibration Enable" "0: Disable,1: Enable" repeat.end rgroup.long 0xE0++0x17 line.long 0x0 "STS0,Status 0" hexmask.long.byte 0x0 8.--11. 1. "DATALEARNPHASEB,Data Learning Phase Selection on Port B" newline hexmask.long.byte 0x0 4.--7. 1. "DATALEARNPHASEA,Data Learning Phase Selection on Port A" newline bitfld.long 0x0 2.--3. "ARBCMDSRC,ARB Command Source" "0: Trigger source is AHB read command.,1: Trigger source is AHB write command.,2: Trigger source is IP command (by writing 1 to..,3: Trigger source is a suspended command that has.." newline bitfld.long 0x0 1. "ARBIDLE,ARB_CTL State Machine Idle" "0: Not idle,1: Idle" newline bitfld.long 0x0 0. "SEQIDLE,SEQ_CTL State Machine Idle" "0: Not idle,1: Idle" line.long 0x4 "STS1,Status 1" hexmask.long.byte 0x4 24.--27. 1. "IPCMDERRCODE,IP Command Error Code" newline hexmask.long.byte 0x4 16.--20. 1. "IPCMDERRID,IP Command Error ID" newline hexmask.long.byte 0x4 8.--11. 1. "AHBCMDERRCODE,AHB Command Error Code" newline hexmask.long.byte 0x4 0.--4. 1. "AHBCMDERRID,AHB Command Error ID" line.long 0x8 "STS2,Status 2" hexmask.long.byte 0x8 24.--29. 1. "BREFSEL,Flash B Sample Clock Reference Delay Line Delay Cell Number" newline hexmask.long.byte 0x8 18.--23. 1. "BSLVSEL,Flash B Sample Clock Target Delay Line Delay Cell Number" newline bitfld.long 0x8 17. "BREFLOCK,Flash B Sample Clock Reference Delay Line Locked" "0: Not locked,1: Locked" newline bitfld.long 0x8 16. "BSLVLOCK,Flash B Sample Target Reference Delay Line Locked" "0: Not locked,1: Locked" newline hexmask.long.byte 0x8 8.--13. 1. "AREFSEL,Flash A Sample Clock Reference Delay Line Delay Cell Number" newline hexmask.long.byte 0x8 2.--7. 1. "ASLVSEL,Flash A Sample Clock Target Delay Line Delay Cell Number" newline bitfld.long 0x8 1. "AREFLOCK,Flash A Sample Clock Reference Delay Line Locked" "0: Not locked,1: Locked" newline bitfld.long 0x8 0. "ASLVLOCK,Flash A Sample Target Delay Line Locked" "0: Not locked,1: Locked" line.long 0xC "AHBSPNDSTS,AHB Suspend Status" hexmask.long.word 0xC 16.--31. 1. "DATLFT,Data Left" newline bitfld.long 0xC 1.--3. "BUFID,AHB Receive Buffer ID for Suspended Command Sequence" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 0. "ACTIVE,Active AHB Read Prefetch Suspended" "0: No suspended AHB read prefetch command.,1: An AHB read prefetch command sequence has been.." line.long 0x10 "IPRXFSTS,IP Receive FIFO Status" hexmask.long.word 0x10 16.--31. 1. "RDCNTR,Read Data Counter" newline hexmask.long.byte 0x10 0.--7. 1. "FILL,Fill Level of IP Receive FIFO" line.long 0x14 "IPTXFSTS,IP Transmit FIFO Status" hexmask.long.word 0x14 16.--31. 1. "WRCNTR,Write Data Counter" newline hexmask.long.byte 0x14 0.--7. 1. "FILL,Fill Level of IP Transmit FIFO" repeat 32. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x100)++0x3 line.long 0x0 "RFDR[$1],IP Receive FIFO Data x" hexmask.long 0x0 0.--31. 1. "RXDATA,Receive Data" repeat.end repeat 32. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x180)++0x3 line.long 0x0 "TFDR[$1],IP TX FIFO Data x" hexmask.long 0x0 0.--31. 1. "TXDATA,Transmit Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x200)++0x3 line.long 0x0 "LUT[$1],Lookup Table x" hexmask.long.byte 0x0 26.--31. 1. "OPCODE1,OPCODE1" newline bitfld.long 0x0 24.--25. "NUM_PADS1,NUM_PADS1" "0,1,2,3" newline hexmask.long.byte 0x0 16.--23. 1. "OPERAND1,OPERAND1" newline hexmask.long.byte 0x0 10.--15. 1. "OPCODE0,OPCODE" newline bitfld.long 0x0 8.--9. "NUM_PADS0,NUM_PADS0" "0,1,2,3" newline hexmask.long.byte 0x0 0.--7. 1. "OPERAND0,OPERAND0" repeat.end group.long 0x440++0x1F line.long 0x0 "AHBBUFREGIONSTART0,Receive Buffer Start Address of Region 0" hexmask.long.tbyte 0x0 12.--31. 1. "START_ADDRESS,Start Address of Prefetch Sub-Buffer Region" line.long 0x4 "AHBBUFREGIONEND0,Receive Buffer Region 0 End Address" hexmask.long.tbyte 0x4 12.--31. 1. "END_ADDRESS,End Address of Prefetch Sub-Buffer Region" line.long 0x8 "AHBBUFREGIONSTART1,Receive Buffer Start Address of Region 1" hexmask.long.tbyte 0x8 12.--31. 1. "START_ADDRESS,Start Address of Prefetch Sub-Buffer Region" line.long 0xC "AHBBUFREGIONEND1,Receive Buffer Region 1 End Address" hexmask.long.tbyte 0xC 12.--31. 1. "END_ADDRESS,End Address of Prefetch Sub-Buffer Region" line.long 0x10 "AHBBUFREGIONSTART2,Receive Buffer Start Address of Region 2" hexmask.long.tbyte 0x10 12.--31. 1. "START_ADDRESS,Start Address of Prefetch Sub-Buffer Region" line.long 0x14 "AHBBUFREGIONEND2,Receive Buffer Region 2 End Address" hexmask.long.tbyte 0x14 12.--31. 1. "END_ADDRESS,End Address of Prefetch Sub-Buffer Region" line.long 0x18 "AHBBUFREGIONSTART3,Receive Buffer Start Address of Region 3" hexmask.long.tbyte 0x18 12.--31. 1. "START_ADDRESS,Start Address of Prefetch Sub-Buffer Region" line.long 0x1C "AHBBUFREGIONEND3,Receive Buffer Region 3 End Address" hexmask.long.tbyte 0x1C 12.--31. 1. "END_ADDRESS,End Address of Prefetch Sub-Buffer Region" tree.end tree "WAKEUP_FLEXSPI_OTFAD" base ad:0x425E0000 group.long 0xC00++0x7 line.long 0x0 "CR,Control Register" bitfld.long 0x0 31. "GE,Global OTFAD Enable" "0: OTFAD has decryption disabled. All data fetched..,1: OTFAD has decryption enabled and processes data.." bitfld.long 0x0 30. "SKBP,Start key blob processing" "0: Key blob processing is not initiated.,1: Properly-enabled key blob processing is initiated." newline bitfld.long 0x0 7. "RRAE,Restricted Register Access Enable" "0: Register access is fully enabled. The OTFAD..,1: Register access is restricted and only the CR SR.." bitfld.long 0x0 5. "KBPE,Key Blob Processing Enable" "0: Key blob processing is disabled.,1: Key blob processing is enabled." newline bitfld.long 0x0 4. "KBSE,Key Blob Scramble Enable" "0: Key blob KEK scrambling is disabled.,1: Key blob KEK scrambling is enabled." bitfld.long 0x0 3. "FLDM,Force Logically Disabled Mode" "0: No effect on the operating mode.,1: Force entry into LDM after a write with this.." newline bitfld.long 0x0 1. "FERR,Force Error" "0: No effect on the SR[KBERE] indicator.,1: SR[KBERR] is immediately set after a write with.." line.long 0x4 "SR,Status Register" rbitfld.long 0x4 31. "KBD,Key Blob Processing Done" "0: Key blob processing was not enabled or is not..,1: Key blob processing was enabled and is complete." rbitfld.long 0x4 30. "KBPE,Key Blob Processing Enable" "0: Key blob processing is not enabled.,1: Key blob processing is enabled." newline rbitfld.long 0x4 29. "GEM,Global Enable Mode" "0: OTFAD is disabled. All data fetched by the..,1: OTFAD is enabled and processes data fetched by.." rbitfld.long 0x4 28. "RRAM,Restricted Register Access Mode" "0: Register access is fully enabled. The OTFAD..,1: Register access is restricted and only the CR SR.." newline hexmask.long.byte 0x4 24.--27. 1. "HRL,Hardware Revision Level" rbitfld.long 0x4 19. "CTXIE3,Context Integrity Error" "0: No key blob integrity error was detected for..,1: A key blob integrity error was detected in.." newline rbitfld.long 0x4 18. "CTXIE2,Context Integrity Error" "0: No key blob integrity error was detected for..,1: A key blob integrity error was detected in.." rbitfld.long 0x4 17. "CTXIE1,Context Integrity Error" "0: No key blob integrity error was detected for..,1: A key blob integrity error was detected in.." newline rbitfld.long 0x4 16. "CTXIE0,Context Integrity Error" "0: No key blob integrity error was detected for..,1: A key blob integrity error was detected in.." rbitfld.long 0x4 11. "CTXER3,Context Error" "0: No key blob error was detected for context 'n'.,1: A key blob integrity error might have been.." newline rbitfld.long 0x4 10. "CTXER2,Context Error" "0: No key blob error was detected for context 'n'.,1: A key blob integrity error might have been.." rbitfld.long 0x4 9. "CTXER1,Context Error" "0: No key blob error was detected for context 'n'.,1: A key blob integrity error might have been.." newline rbitfld.long 0x4 8. "CTXER0,Context Error" "0: No key blob error was detected for context 'n'.,1: A key blob integrity error might have been.." hexmask.long.byte 0x4 4.--7. 1. "NCTX,Number of Contexts" newline rbitfld.long 0x4 2.--3. "MODE,Operating Mode" "0: Operating in Normal mode (NRM),1: Unused (reserved),2: Unused (reserved),3: Operating in Logically Disabled Mode (LDM)" rbitfld.long 0x4 1. "MDPCP,MDPC Present" "0,1" newline eventfld.long 0x4 0. "KBERR,Key Blob Error" "0: No key blob error detected.,1: One or more key blob errors has been detected." repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x425E0D00 ad:0x425E0D40 ad:0x425E0D80 ad:0x425E0DC0) tree "CTX[$1]" base $2 repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2)++0x3 line.long 0x0 "CTX_KEY$1,AES Key Word" hexmask.long 0x0 0.--31. 1. "KEY,AES Key" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x10)++0x3 line.long 0x0 "CTX_CTR$1,AES Counter Word" hexmask.long 0x0 0.--31. 1. "CTR,AES Counter" repeat.end group.long ($2+0x18)++0x7 line.long 0x0 "CTX_RGD_W0,AES Region Descriptor Word0" hexmask.long.tbyte 0x0 10.--31. 1. "SRTADDR,Start Address" line.long 0x4 "CTX_RGD_W1,AES Region Descriptor Word1" hexmask.long.tbyte 0x4 10.--31. 1. "ENDADDR,End Address" bitfld.long 0x4 2. "RO,Read-Only" "0: The context registers can be accessed normally..,1: The context registers are read-only and accesses.." newline bitfld.long 0x4 1. "ADE,AES Decryption Enable." "0: Bypass the fetched data.,1: Perform the CTR-AES128 mode decryption on the.." bitfld.long 0x4 0. "VLD,Valid" "0: Context is invalid.,1: Context is valid." tree.end repeat.end tree.end tree "WAKEUP_I3C" base ad:0x42520000 group.long 0x0++0x17 line.long 0x0 "MCONFIG,Controller Configuration" hexmask.long.byte 0x0 28.--31. 1. "I2CBAUD,I2C Baud Rate" bitfld.long 0x0 25.--27. "SKEW,Skew" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 24. "ODHPP,Open Drain High Push-Pull" "0: ODHPP disabled. Open-Drain SCL High half-clock..,1: ODHPP enabled. Open-Drain High SCL half-lock.." hexmask.long.byte 0x0 16.--23. 1. "ODBAUD,Open Drain Baud Rate" newline hexmask.long.byte 0x0 12.--15. 1. "PPLOW,Push-Pull Low" hexmask.long.byte 0x0 8.--11. 1. "PPBAUD,Push-Pull Baud Rate" newline bitfld.long 0x0 6. "ODSTOP,Open Drain Stop" "0: Disable open-drain stop. ODSTOP must be disabled..,1: Enable open-drain stop. STOP is emitted at.." bitfld.long 0x0 4.--5. "HKEEP,High-Keeper" "0: NONE,1: WIRED_IN,2: PASSIVE_SDA,3: PASSIVE_ON_SDA_SCL" newline bitfld.long 0x0 3. "DISTO,Disable Timeout" "0: Timeout enabled,1: Timeout disabled if timeout is configured" bitfld.long 0x0 0.--1. "MSTENA,Controller Enable" "0: CONTROLLER_OFF,1: CONTROLLER_ON,2: CONTROLLER_CAPABLE,?" line.long 0x4 "SCONFIG,Target Configuration" hexmask.long.byte 0x4 25.--31. 1. "SADDR,Static Address" hexmask.long.byte 0x4 16.--21. 1. "BAMATCH,Bus Available Match" newline bitfld.long 0x4 9. "OFFLINE,Offline" "0: Disable,1: Enables wait to ensure the bus is not in HDR mode." bitfld.long 0x4 4. "HDROK,HDR OK" "0: Disable HDR OK.,1: Enable HDR OK. Allow HDR-DDR and/or HDR-BT.." newline bitfld.long 0x4 3. "S0IGNORE,Ignore TE0/TE1 Errors" "0: Do not ignore TE0/TE1 errors,1: Ignore TE0/TE1 errors. Target does not detect.." bitfld.long 0x4 2. "MATCHSS,Match START or STOP" "0: Match START or STOP disable,1: Match START or STOP enable. START and STOP.." newline bitfld.long 0x4 1. "NACK,Not Acknowledge" "0: Always NACK disable,1: Always NACK enable. The target rejects all.." bitfld.long 0x4 0. "SLVENA,Target Enable" "0: Target ignores the I2C or I3C bus,1: Target can operate on the I2C or I3C bus" line.long 0x8 "SSTATUS,Target Status" rbitfld.long 0x8 30.--31. "TIMECTRL,Time Control" "0: NO_TIME_CONTROL,1: SYNC_MODE,2: ASYNC_MODE,3: BOTHSYNCASYNC" rbitfld.long 0x8 28.--29. "ACTSTATE,Activity State from Common Command Codes (CCC)" "0: NO_LATENCY,1: LATENCY_1MS,2: LATENCY_100MS,3: LATENCY_10S" newline rbitfld.long 0x8 27. "HJDIS,Hot-Join Disabled" "0: Hot-Join not disabled,1: Hot-Join disabled" rbitfld.long 0x8 25. "MRDIS,Controller Requests Are Disabled" "0: Controller Requests not disabled,1: Controller Requests disabled" newline rbitfld.long 0x8 24. "IBIDIS,In-Band Interrupts Are Disabled" "0: In-Band Interrupts not disabled,1: In-Band Interrupts disabled" rbitfld.long 0x8 20.--21. "EVDET,Event Details" "0: NONE,1: NO_REQUEST,2: NACKED,3: ACKED" newline eventfld.long 0x8 19. "SLVRST,Target Reset" "0,1" eventfld.long 0x8 18. "EVENT,Event" "0: No event has occurred.,1: An IBI CR or HJ has occurred." newline eventfld.long 0x8 17. "CHANDLED,Common Command Code Handled" "0: CCC handling not in progress.,1: CCC handling in progress." eventfld.long 0x8 16. "HDRMATCH,High Data Rate Command Match" "0: HDR command did not match.,1: HDR command matched the I3C Dynamic Address of.." newline rbitfld.long 0x8 15. "ERRWARN,Error Warning" "0,1" eventfld.long 0x8 14. "CCC,Common Command Code" "0: No CCC received.,1: CCC received." newline eventfld.long 0x8 13. "DACHG,Dynamic Address Change" "0: No DA change detected.,1: DA change detected. The target DA has been.." rbitfld.long 0x8 12. "TXNOTFULL,Transmit Buffer Is Not Full" "0: Transmit buffer full,1: Transmit buffer not full" newline rbitfld.long 0x8 11. "RX_PEND,Received Message Pending" "0: No received message is pending.,1: Received message is pending." eventfld.long 0x8 10. "STOP,Stop" "0: No STOP detected.,1: Stopped state detected. A STOP state was present.." newline eventfld.long 0x8 9. "MATCHED,Matched" "0: No header matched.,1: An incoming header matched the I3C Dynamic or.." eventfld.long 0x8 8. "START,Start" "0: No START seen.,1: A START or repeated START was seen after the.." newline rbitfld.long 0x8 6. "STHDR,Status High Data Rate" "0: I3C bus not in HDR-DDR mode,1: The I3C bus is in HDR-DDR mode regardless of.." rbitfld.long 0x8 5. "STDAA,Status Dynamic Address Assignment" "0: Not in ENTDAA mode.,1: I3C bus is in Enter Dynamic Address Assignment.." newline rbitfld.long 0x8 4. "STREQWR,Status Request Write" "0: REQ in process is not SDR write data from the..,1: REQ in process is SDR write data from the.." rbitfld.long 0x8 3. "STREQRD,Status Request Read" "0: REQ in process is not an SDR read from this..,1: The REQ in process is an SDR read from this.." newline rbitfld.long 0x8 2. "STCCCH,Status Common Command Code Handler" "0: No CCC message is being handled.,1: A CCC message is being handled automatically." rbitfld.long 0x8 1. "STMSG,Status message" "0: Bus target not listening or responding.,1: This bus target is listening to the bus traffic.." newline rbitfld.long 0x8 0. "STNOTSTOP,Status Not Stop" "0: I3C module is in a STOP condition.,1: The bus is busy (has activity)." line.long 0xC "SCTRL,Target Control" hexmask.long.byte 0xC 24.--31. 1. "VENDINFO,Vendor Information" bitfld.long 0xC 20.--21. "ACTSTATE,Activity State of Target" "0,1,2,3" newline hexmask.long.byte 0xC 16.--19. 1. "PENDINT,Pending Interrupt" hexmask.long.byte 0xC 8.--15. 1. "IBIDATA,In-Band Interrupt Data" newline bitfld.long 0xC 4. "MAPIDX,Map Index" "0,1" bitfld.long 0xC 3. "EXTDATA,Extended Data" "0: Extended data disabled.,1: Extended data enabled. After IBIDATA is emitted.." newline bitfld.long 0xC 0.--1. "EVENT,Event" "0: NORMAL_MODE,1: IBI,2: CONTROLLER_REQUEST,3: HOT_JOIN_REQUEST" line.long 0x10 "SINTSET,Target Interrupt Set" bitfld.long 0x10 19. "SLVRST,Target Reset" "0: Disable Target Reset interrupt,1: Enable Target Reset interrupt" bitfld.long 0x10 18. "EVENT,Event Interrupt Enable" "0: Disable Event interrupt,1: Enable Event interrupt" newline bitfld.long 0x10 17. "CHANDLED,Common Command Code (CCC) Interrupt Enable" "0: Disable CCC Handled interrupt,1: Enable CCC Handled interrupt" bitfld.long 0x10 16. "DDRMATCHED,Double Data Rate Interrupt Enable" "0: Disable DDR interrupt,1: Enable DDR interrupt" newline bitfld.long 0x10 15. "ERRWARN,Error or Warning Interrupt Enable" "0: Disable error or warning interrupt,1: Enable error or warning interrupt" bitfld.long 0x10 14. "CCC,CCC (that was not handled by I3C module) Interrupt Enable" "0: Disable CCC interrupt,1: Enable CCC interrupt" newline bitfld.long 0x10 13. "DACHG,Dynamic Address Change Interrupt Enable" "0: Disable DA Change interrupt,1: Enable DA Change interrupt" bitfld.long 0x10 12. "TXSEND,Transmit Interrupt Enable" "0: Disable Transmit interrupt,1: Enable Transmit interrupt" newline bitfld.long 0x10 11. "RXPEND,Receive Interrupt Enable" "0: Disable Receive interrupt,1: Enable Receive interrupt" bitfld.long 0x10 10. "STOP,Stop Interrupt Enable" "0: Disable STOP interrupt,1: Enable STOP interrupt" newline bitfld.long 0x10 9. "MATCHED,Match interrupt enable" "0: Disable match interrupt,1: Enable match interrupt" bitfld.long 0x10 8. "START,Start Interrupt Enable" "0: Disable START interrupt,1: Enable START interrupt" line.long 0x14 "SINTCLR,Target Interrupt Clear" eventfld.long 0x14 19. "SLVRST,Target Reset" "0,1" eventfld.long 0x14 18. "EVENT,EVENT Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 17. "CHANDLED,CHANDLED Interrupt Enable Clear" "0,1" eventfld.long 0x14 16. "DDRMATCHED,DDRMATCHED Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 15. "ERRWARN,ERRWARN Interrupt Enable Clear" "0,1" eventfld.long 0x14 14. "CCC,CCC Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 13. "DACHG,DACHG Interrupt Enable Clear" "0,1" eventfld.long 0x14 12. "TXSEND,TXSEND Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 11. "RXPEND,RXPEND Interrupt Enable Clear" "0,1" eventfld.long 0x14 10. "STOP,STOP Interrupt Enable Clear" "0,1" newline eventfld.long 0x14 9. "MATCHED,MATCHED Interrupt Enable Clear" "0,1" eventfld.long 0x14 8. "START,START Interrupt Enable Clear" "0,1" rgroup.long 0x18++0x3 line.long 0x0 "SINTMASKED,Target Interrupt Mask" bitfld.long 0x0 18. "EVENT,EVENT Interrupt Mask" "0,1" bitfld.long 0x0 17. "CHANDLED,CHANDLED Interrupt Mask" "0,1" newline bitfld.long 0x0 16. "DDRMATCHED,DDRMATCHED Interrupt Mask" "0,1" bitfld.long 0x0 15. "ERRWARN,ERRWARN Interrupt Mask" "0,1" newline bitfld.long 0x0 14. "CCC,CCC Interrupt Mask" "0,1" bitfld.long 0x0 13. "DACHG,DACHG Interrupt Mask" "0,1" newline bitfld.long 0x0 12. "TXSEND,TXSEND Interrupt Mask" "0,1" bitfld.long 0x0 11. "RXPEND,RXPEND Interrupt Mask" "0,1" newline bitfld.long 0x0 10. "STOP,STOP Interrupt Mask" "0,1" bitfld.long 0x0 9. "MATCHED,MATCHED Interrupt Mask" "0,1" newline bitfld.long 0x0 8. "START,START interrupt mask" "0,1" group.long 0x1C++0x7 line.long 0x0 "SERRWARN,Target Errors and Warnings" eventfld.long 0x0 17. "OWRITE,Over-write Error" "0: No Overwrite error,1: Overwrite error" eventfld.long 0x0 16. "OREAD,Over-read Error" "0: No Over-read error,1: Over-read error" newline eventfld.long 0x0 11. "S0S1,TE0 or TE1 Error" "0: No TE0 or TE1 error,1: TE0 or TE1 error" eventfld.long 0x0 10. "HCRC,HDR-DDR CRC Error" "0: No HDR-DDR CRC error,1: HDR-DDR CRC error" newline eventfld.long 0x0 9. "HPAR,HDR Parity Error" "0: No HDR Parity error,1: HDR Parity error" eventfld.long 0x0 8. "SPAR,SDR Parity Error" "0: No SDR Parity error,1: SDR Parity error" newline eventfld.long 0x0 4. "INVSTART,Invalid Start Error" "0: No invalid start error,1: Invalid start error" eventfld.long 0x0 3. "TERM,Terminated Error" "0: No terminated error,1: Terminated error" newline eventfld.long 0x0 2. "URUNNACK,Underrun and Not Acknowledged (NACKED) Error" "0: No underrun and not acknowledged error,1: Underrun and not acknowledged error" eventfld.long 0x0 1. "URUN,Underrun Error" "0: No underrun error,1: Underrun error" newline eventfld.long 0x0 0. "ORUN,Overrun Error" "0: No overrun error,1: Overrun error" line.long 0x4 "SDMACTRL,Target DMA Control" bitfld.long 0x4 4.--5. "DMAWIDTH,Width of DMA Operations" "0: Byte,1: Byte,2: Half word (16 bits),?" bitfld.long 0x4 2.--3. "DMATB,DMA Write (To-bus) Trigger" "0: DMA not used,1: DMA enabled for one frame (ended by DMA or..,2: DMA enabled until turned off,?" newline bitfld.long 0x4 0.--1. "DMAFB,DMA Read (From-bus) Trigger" "0: DMA not used,1: DMA is enabled for one frame,2: DMA enabled until turned off,?" group.long 0x2C++0x3 line.long 0x0 "SDATACTRL,Target Data Control" rbitfld.long 0x0 31. "RXEMPTY,Receive Is Empty" "0: Not empty,1: Empty" rbitfld.long 0x0 30. "TXFULL,Transmit Is Full" "0: Not full,1: Full" newline hexmask.long.byte 0x0 24.--28. 1. "RXCOUNT,Count of Bytes in Receive" hexmask.long.byte 0x0 16.--20. 1. "TXCOUNT,Count of Bytes in Transmit" newline bitfld.long 0x0 6.--7. "RXTRIG,Receive Trigger Level" "0: Trigger when not empty,1: Trigger when 1/4 or more full,2: Trigger when 1/2 or more full,3: Trigger when 3/4 or more full" bitfld.long 0x0 4.--5. "TXTRIG,Transmit Trigger Level" "0: Trigger when empty,1: Trigger when 1/4 full or less,2: Trigger when 1/2 full or less,3: Default. Trigger when 1 less than full or less" newline bitfld.long 0x0 3. "UNLOCK,Unlock" "0: RXTRIG and TXTRIG fields cannot be changed on a..,1: RXTRIG and TXTRIG fields can be changed on a.." bitfld.long 0x0 1. "FLUSHFB,Flush the From-bus Buffer or FIFO" "0,1" newline bitfld.long 0x0 0. "FLUSHTB,Flush the To-bus Buffer or FIFO" "0,1" wgroup.long 0x30++0xF line.long 0x0 "SWDATAB,Target Write Data Byte" bitfld.long 0x0 16. "END_ALSO,End Also" "0: Not the end. There are more bytes in the message.,1: End. This bit marks the last byte of the message." bitfld.long 0x0 8. "END,End" "0: Not the end. There are more bytes in the message.,1: End. This bit marks the last byte of the message." newline hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" line.long 0x4 "SWDATABE,Target Write Data Byte End" hexmask.long.byte 0x4 0.--7. 1. "DATA,Data" line.long 0x8 "SWDATAH,Target Write Data Half-word" bitfld.long 0x8 16. "END,End of message" "0: Not the end. There are more bytes in the message.,1: End. This bit marks the last byte of the message." hexmask.long.byte 0x8 8.--15. 1. "DATA1,Data 1" newline hexmask.long.byte 0x8 0.--7. 1. "DATA0,Data 0" line.long 0xC "SWDATAHE,Target Write Data Half-word End" hexmask.long.byte 0xC 8.--15. 1. "DATA1,Data 1" hexmask.long.byte 0xC 0.--7. 1. "DATA0,Data 0" rgroup.long 0x40++0x3 line.long 0x0 "SRDATAB,Target Read Data Byte" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data 0" rgroup.long 0x48++0x3 line.long 0x0 "SRDATAH,Target Read Data Halfword" hexmask.long.byte 0x0 8.--15. 1. "MSB,The second byte read from the target" hexmask.long.byte 0x0 0.--7. 1. "LSB,The first byte read from the target" wgroup.long 0x54++0x3 line.long 0x0 "SWDATAB1,Target Write Data Byte" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" wgroup.long 0x54++0x3 line.long 0x0 "SWDATAH1,Target Write Data Halfword" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" rgroup.long 0x5C++0x7 line.long 0x0 "SCAPABILITIES2,Target Capabilities 2" bitfld.long 0x0 23. "SSTWR,Target-Target(s)-Tunnel Write Capable" "0: Not write capable,1: Write capable" bitfld.long 0x0 22. "SSTSUB,Target-Target(s)-Tunnel Subscriber Capable" "0: Not subscriber capable,1: Subscriber capable" newline bitfld.long 0x0 21. "AASA,Supports SETAASA" "0: Does not support SETAASA,1: Supports SETAASA" bitfld.long 0x0 18.--19. "GROUP,Group" "0: Does not supports v1.1 Group addressing,1: Supports one group,2: Supports two groups,3: Supports three groups" newline bitfld.long 0x0 17. "SLVRST,Target Reset" "0: Does not support Target Reset,1: Supports Target Reset" bitfld.long 0x0 16. "V1_1,Version 1.1" "0: Does not support GETCAPS,1: Supports GETCAPS" newline bitfld.long 0x0 9. "IBIXREG,In-Band Interrupt Extended Register" "0: Does not support extended registers for IBIs,1: Supports extended registers for IBIs" bitfld.long 0x0 8. "IBIEXT,In-Band Interrupt EXTDATA" "0: Does not support IBIEXT,1: Supports IBIEXT" newline bitfld.long 0x0 6. "I2CDEVID,I2C Device ID" "0: Does not support I2C device ID,1: Supports I2C device ID" bitfld.long 0x0 5. "I2CRST,I2C Software Reset" "0: Does not support I2C software reset,1: Supports I2C software reset" newline bitfld.long 0x0 4. "I2C10B,I2C 10-bit Address" "0: Does not support 10-bit I2C address,1: Supports 10-bit I2C address" hexmask.long.byte 0x0 0.--3. 1. "MAPCNT,Map Count" line.long 0x4 "SCAPABILITIES,Target Capabilities" bitfld.long 0x4 31. "DMA,Direct Memory Access" "0: Not supported,1: Supported" bitfld.long 0x4 30. "INT,Interrupts" "0: Not supported,1: Supported" newline bitfld.long 0x4 28.--29. "FIFORX,FIFO Receive" "0: Two or three,1: Four,2: Eight,3: 16 or larger" bitfld.long 0x4 26.--27. "FIFOTX,FIFO Transmit" "0: Two,1: Four,2: Eight,3: 16 or larger" newline bitfld.long 0x4 23.--25. "EXTFIFO,External FIFO" "0: No external FIFO is available,1: Standard available or free external FIFO,2: Request track external FIFO,?,?,?,?,?" bitfld.long 0x4 21. "TIMECTRL,Time Control" "0: No time control enabled,1: At least one time-control type supported" newline hexmask.long.byte 0x4 16.--20. 1. "IBI_MR_HJ,In-Band Interrupts Controller Requests Hot-Join Events" hexmask.long.byte 0x4 12.--15. 1. "CCCHANDLE,Common Command Codes Handling" newline bitfld.long 0x4 10.--11. "SADDR,Static Address" "0: No static address,1: Static address is fixed in hardware,2: Hardware controls the static address dynamically..,3: SCONFIG register supplies the static address" bitfld.long 0x4 9. "MASTER,Controller" "0: Not supported,1: Supported" newline bitfld.long 0x4 6.--7. "HDRSUPP,High Data Rate Support" "0: No HDR modes supported,1: Double Data Rate mode supported,?,?" hexmask.long.byte 0x4 2.--5. 1. "IDREG,ID Register" newline bitfld.long 0x4 0.--1. "IDENA,ID 48b Handler" "0: Application,1: Hardware,2: Hardware but the I3C module instance handles ID..,3: A part number register (PARTNO)" group.long 0x68++0x13 line.long 0x0 "SMAXLIMITS,Target Maximum Limits" hexmask.long.word 0x0 16.--27. 1. "MAXWR,Maximum Write Length" hexmask.long.word 0x0 0.--11. 1. "MAXRD,Maximum Read Length" line.long 0x4 "SIDPARTNO,Target ID Part Number" hexmask.long 0x4 0.--31. 1. "PARTNO,Part number" line.long 0x8 "SIDEXT,Target ID Extension" hexmask.long.byte 0x8 16.--23. 1. "BCR,Bus Characteristics Register" hexmask.long.byte 0x8 8.--15. 1. "DCR,Device Characteristic Register" line.long 0xC "SVENDORID,Target Vendor ID" hexmask.long.word 0xC 0.--14. 1. "VID,Vendor ID" line.long 0x10 "STCCLOCK,Target Time Control Clock" hexmask.long.byte 0x10 8.--15. 1. "FREQ,Clock Frequency" hexmask.long.byte 0x10 0.--7. 1. "ACCURACY,Clock Accuracy" rgroup.long 0x7C++0x3 line.long 0x0 "SMSGMAPADDR,Target Message Map Address" hexmask.long.byte 0x0 16.--19. 1. "MAPLASTM2,Matched Previous Index 2" hexmask.long.byte 0x0 8.--11. 1. "MAPLASTM1,Matched Previous Address Index 1" newline bitfld.long 0x0 4. "LASTSTATIC,Last Static Address Matched" "0: I3C dynamic address,1: I2C static address" hexmask.long.byte 0x0 0.--3. 1. "MAPLAST,Matched Address Index" group.long 0x80++0x17 line.long 0x0 "MCONFIG_EXT,Controller Extended Configuration" bitfld.long 0x0 18.--19. "I3C_CASR_DEL,I3C CAS Delay After Repeated START" "0: No Delay,1: Increases SCL clock period by 1/2.,2: Increases SCL clock period by 1.,3: Increases SCL clock period by 1 1/2." bitfld.long 0x0 16.--17. "I3C_CAS_DEL,I3C CAS Delay after START" "0: No Delay,1: Increases SCL clock period by 1/2.,2: Increases SCL clock period by 1.,3: Increases SCL clock period by 1 1/2." newline bitfld.long 0x0 9.--11. "I2C_A10BEXT,I2C_A10BEXT" "0,1,2,3,4,5,6,7" bitfld.long 0x0 8. "I2C_A10B,I2C_A10B" "0: Disabled,1: Enabled for 10-bit addressing." newline bitfld.long 0x0 4. "I2CHS,I2C HS" "0,1" hexmask.long.byte 0x0 0.--3. 1. "I2CBLOW,I2C BAUD Low" line.long 0x4 "MCTRL,Controller Control" hexmask.long.byte 0x4 16.--23. 1. "RDTERM,Read Terminate Counter" hexmask.long.byte 0x4 9.--15. 1. "ADDR,Address" newline bitfld.long 0x4 8. "DIR,Direction" "0: Write,1: Read" bitfld.long 0x4 6.--7. "IBIRESP,In-Band Interrupt Response" "0: ACK (acknowledge),1: NACK (reject),2: Acknowledge with mandatory byte,3: Manual" newline bitfld.long 0x4 4.--5. "TYPE,Bus Type with EmitStartAddr" "0: I3C,1: I2C,2: DDR,?" bitfld.long 0x4 0.--2. "REQUEST,Request" "0: NONE,1: EMITSTARTADDR,2: EMITSTOP,3: IBIACKNACK,4: PROCESSDAA,?,6: Force Exit and Target Reset,7: AUTOIBI" line.long 0x8 "MSTATUS,Controller Status" hexmask.long.byte 0x8 24.--30. 1. "IBIADDR,IBI Address" eventfld.long 0x8 19. "NOWMASTER,Module Is Now Controller" "0: Module has not become controller,1: Module has become controller" newline rbitfld.long 0x8 15. "ERRWARN,Error Or Warning" "0: No error or warning,1: Error or warning" eventfld.long 0x8 13. "IBIWON,In-Band Interrupt (IBI) Won" "0: No IBI arbitration won,1: IBI arbitration won" newline rbitfld.long 0x8 12. "TXNOTFULL,TX Buffer or FIFO Not Full" "0: Receive buffer or FIFO full,1: Receive buffer or FIFO not full" rbitfld.long 0x8 11. "RXPEND,RXPEND" "0: No receive message pending,1: Receive message pending" newline eventfld.long 0x8 10. "COMPLETE,Complete" "0: Not complete,1: Complete" eventfld.long 0x8 9. "MCTRLDONE,Controller Control Done" "0: Not done,1: Done" newline eventfld.long 0x8 8. "SLVSTART,Target Start" "0: Target not requesting START,1: Target requesting START" rbitfld.long 0x8 6.--7. "IBITYPE,In-Band Interrupt (IBI) Type" "0: NONE,1: In-Band Interrupt,2: Controller Request,3: Hot-Join" newline rbitfld.long 0x8 5. "NACKED,Not Acknowledged" "0: Not NACKed,1: NACKed (not acknowledged)" rbitfld.long 0x8 4. "BETWEEN,Between" "0: Inactive,1: Active" newline rbitfld.long 0x8 0.--2. "STATE,State Of The Controller" "0: IDLE,1: SLVREQ,2: MSGSDR,3: NORMACT,4: MSGDDR,5: DAA,6: IBIACK,7: IBIRCV" line.long 0xC "MIBIRULES,Controller In-band Interrupt Registry and Rules" bitfld.long 0xC 31. "NOBYTE,No IBI byte" "0: With mandatory IBI byte,1: Without mandatory IBI byte" bitfld.long 0xC 30. "MSB0,Most Significant Address Bit Is 0" "0: MSB is not 0.,1: For all I3C dynamic addresses MSB is 0." newline hexmask.long.byte 0xC 24.--29. 1. "ADDR4,ADDR4" hexmask.long.byte 0xC 18.--23. 1. "ADDR3,ADDR3" newline hexmask.long.byte 0xC 12.--17. 1. "ADDR2,ADDR2" hexmask.long.byte 0xC 6.--11. 1. "ADDR1,ADDR1" newline hexmask.long.byte 0xC 0.--5. 1. "ADDR0,ADDR0" line.long 0x10 "MINTSET,Controller Interrupt Set" bitfld.long 0x10 19. "NOWMASTER,Now Controller (now this I3C module is a controller) Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x10 15. "ERRWARN,Error or Warning (ERRWARN) Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 13. "IBIWON,In-Band Interrupt (IBI) Won Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x10 12. "TXNOTFULL,TX buffer/FIFO is not full interrupt enable" "0: Disable,1: Enable" newline bitfld.long 0x10 11. "RXPEND,Rx Pending Interrupt Enable" "0,1" bitfld.long 0x10 10. "COMPLETE,Completed Message Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x10 9. "MCTRLDONE,Controller Control Done Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x10 8. "SLVSTART,Target Start Interrupt Enable" "0: Disable,1: Enable" line.long 0x14 "MINTCLR,Controller Interrupt Clear" eventfld.long 0x14 19. "NOWMASTER,NOWCONTROLLER Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 15. "ERRWARN,ERRWARN Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" newline eventfld.long 0x14 13. "IBIWON,IBIWON Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 12. "TXNOTFULL,TXNOTFULL Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" newline eventfld.long 0x14 11. "RXPEND,RXPEND Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 10. "COMPLETE,COMPLETE Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" newline eventfld.long 0x14 9. "MCTRLDONE,MCTRLDONE Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" eventfld.long 0x14 8. "SLVSTART,SLVSTART Interrupt Enable Clear" "0: No effect,1: Corresponding interrupt enable becomes 0" rgroup.long 0x98++0x3 line.long 0x0 "MINTMASKED,Controller Interrupt Mask" bitfld.long 0x0 19. "NOWMASTER,NOWCONTROLLER Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" bitfld.long 0x0 15. "ERRWARN,ERRWARN Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" newline bitfld.long 0x0 13. "IBIWON,IBIWON Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" bitfld.long 0x0 12. "TXNOTFULL,TXNOTFULL Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" newline bitfld.long 0x0 11. "RXPEND,RXPEND Interrupt Mask" "0,1" bitfld.long 0x0 10. "COMPLETE,COMPLETE Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" newline bitfld.long 0x0 9. "MCTRLDONE,MCTRLDONE Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" bitfld.long 0x0 8. "SLVSTART,SLVSTART Interrupt Mask" "0: Interrupt not enabled and/or not active,1: Interrupt enabled and active" group.long 0x9C++0x7 line.long 0x0 "MERRWARN,Controller Errors and Warnings" eventfld.long 0x0 20. "TIMEOUT,Timeout Error" "0: No error,1: Error" eventfld.long 0x0 19. "INVREQ,Invalid Request Error" "0: No error,1: Error" newline eventfld.long 0x0 18. "MSGERR,Message Error" "0: No error,1: Error" eventfld.long 0x0 17. "OWRITE,Over-write Error" "0: No error,1: Error" newline eventfld.long 0x0 16. "OREAD,Over-read Error" "0: No error,1: Error" eventfld.long 0x0 10. "HCRC,High Data Rate CRC Error" "0: No error,1: Error" newline eventfld.long 0x0 9. "HPAR,High Data Rate Parity" "0: No error,1: Error" eventfld.long 0x0 4. "TERM,Terminate Error" "0: No error,1: Error" newline eventfld.long 0x0 3. "WRABT,Write Abort Error" "0: No error,1: Error" eventfld.long 0x0 2. "NACK,Not Acknowledge Error" "0: No error,1: Error" newline eventfld.long 0x0 1. "URUN,Underrun error" "0: No error,1: Error" line.long 0x4 "MDMACTRL,Controller DMA Control" bitfld.long 0x4 4.--5. "DMAWIDTH,DMA Width" "0: Byte,1: Byte,2: Halfword (16 bits),?" bitfld.long 0x4 2.--3. "DMATB,DMA To Bus" "0: DMA is not used,1: Enable DMA for one frame (ended by DMA or..,2: Enable DMA until DMA is turned off,?" newline bitfld.long 0x4 0.--1. "DMAFB,DMA From Bus" "0: DMA is not used,1: Enable DMA for one frame,2: Enable DMA until DMA is turned off,?" group.long 0xAC++0x3 line.long 0x0 "MDATACTRL,Controller Data Control" rbitfld.long 0x0 31. "RXEMPTY,Receive Is Empty" "0: Receive FIFO or buffer is not yet empty.,1: Receive FIFO or buffer is empty." rbitfld.long 0x0 30. "TXFULL,Transmit Is Full" "0: Transmit FIFO or buffer is not yet full.,1: Transmit FIFO or buffer is full." newline hexmask.long.byte 0x0 24.--28. 1. "RXCOUNT,Receive Byte Count" hexmask.long.byte 0x0 16.--20. 1. "TXCOUNT,Transmit Byte Count" newline bitfld.long 0x0 6.--7. "RXTRIG,Receive Trigger Level" "0: Trigger when not empty,1: Trigger when 1/4 full or more,2: Trigger when 1/2 full or more,3: Trigger when 3/4 full or more" bitfld.long 0x0 4.--5. "TXTRIG,Transmit Trigger Level" "0: Trigger when empty,1: Trigger when 1/4 full or less,2: Trigger when 1/2 full or less,3: Default. Trigger when 1 less than full or less" newline bitfld.long 0x0 3. "UNLOCK,Unlock" "0: Locked. RXTRIG and TXTRIG fields cannot be..,1: Unlocked. RXTRIG and TXTRIG fields can be.." bitfld.long 0x0 1. "FLUSHFB,Flush From-bus Buffer or FIFO" "0: No action,1: Flush the buffer" newline bitfld.long 0x0 0. "FLUSHTB,Flush To-bus Buffer or FIFO" "0: No action,1: Flush the buffer" wgroup.long 0xB0++0xF line.long 0x0 "MWDATAB,Controller Write Data Byte" bitfld.long 0x0 16. "END_ALSO,End of Message Also" "0: Not the end. More bytes are assumed to be in the..,1: End. The END bit marks the last byte of the.." bitfld.long 0x0 8. "END,End of Message" "0: Not the end. More bytes are assumed to be in the..,1: End. The END bit marks the last byte of the.." newline hexmask.long.byte 0x0 0.--7. 1. "VALUE,Data Byte" line.long 0x4 "MWDATABE,Controller Write Data Byte End" hexmask.long.byte 0x4 0.--7. 1. "VALUE,Data" line.long 0x8 "MWDATAH,Controller Write Data Halfword" bitfld.long 0x8 16. "END,End of message" "0: Not the end. More bytes are assumed to be in the..,1: End. The END bit marks the last byte of the.." hexmask.long.byte 0x8 8.--15. 1. "DATA1,Data Byte 1" newline hexmask.long.byte 0x8 0.--7. 1. "DATA0,Data Byte 0" line.long 0xC "MWDATAHE,Controller Write Data Halfword End" hexmask.long.byte 0xC 8.--15. 1. "DATA1,Data Byte 1" hexmask.long.byte 0xC 0.--7. 1. "DATA0,Data Byte 0" rgroup.long 0xC0++0x3 line.long 0x0 "MRDATAB,Controller Read Data Byte" hexmask.long.byte 0x0 0.--7. 1. "VALUE,Value" rgroup.long 0xC8++0x3 line.long 0x0 "MRDATAH,Controller Read Data Halfword" hexmask.long.byte 0x0 8.--15. 1. "MSB,MSB" hexmask.long.byte 0x0 0.--7. 1. "LSB,LSB" wgroup.long 0xCC++0x3 line.long 0x0 "MWDATAB1,Controller Write Byte Data 1(to bus)" hexmask.long.byte 0x0 0.--7. 1. "VALUE,Value" wgroup.long 0xCC++0x7 line.long 0x0 "MWDATAH1,Controller Write Halfword Data (to bus)" hexmask.long.word 0x0 0.--15. 1. "VALUE,Value" line.long 0x4 "MWMSG_SDR_CONTROL,Controller Write Message Control in SDR mode" hexmask.long.byte 0x4 11.--15. 1. "LEN,Length" bitfld.long 0x4 10. "I2C,I2C" "0: I3C message,1: I2C message" newline bitfld.long 0x4 8. "END,End of SDR Message" "0: Not the end. SDR message ends waiting for a new..,1: End. SDR message ends at the STOP." hexmask.long.byte 0x4 1.--7. 1. "ADDR,Address" newline bitfld.long 0x4 0. "DIR,Direction" "0: Write,1: Read" wgroup.long 0xD0++0x3 line.long 0x0 "MWMSG_SDR_DATA,Controller Write Message Data in SDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA16B,Data" rgroup.long 0xD4++0x3 line.long 0x0 "MRMSG_SDR,Controller Read Message in SDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" wgroup.long 0xD8++0x3 line.long 0x0 "MWMSG_DDR_CONTROL,Controller Write Message in DDR mode: First Control Word" hexmask.long.word 0x0 0.--15. 1. "ADDRCMD,Address Command" wgroup.long 0xD8++0x3 line.long 0x0 "MWMSG_DDR_CONTROL2,Controller Write Message in DDR mode Control 2" bitfld.long 0x0 14. "END,End of message" "0: Not the end. DDR message ends waiting for a new..,1: End. DDR message ends on HDR Exit." hexmask.long.word 0x0 0.--9. 1. "LEN,Length of Message" wgroup.long 0xD8++0x3 line.long 0x0 "MWMSG_DDR_DATA,Controller Write Message Data in DDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA16B,Data" rgroup.long 0xDC++0x3 line.long 0x0 "MRMSG_DDR,Controller Read Message in DDR mode" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" group.long 0xE4++0x3 line.long 0x0 "MDYNADDR,Controller Dynamic Address" hexmask.long.byte 0x0 1.--7. 1. "DADDR,Dynamic address" bitfld.long 0x0 0. "DAVALID,Dynamic address valid" "0: No valid DA assigned,1: Valid DA assigned" group.long 0x100++0x3 line.long 0x0 "SRSTACTTIME,Timing Rules for TargetReset Recovery" hexmask.long.byte 0x0 16.--23. 1. "CUSRSTTIM,Custom Time to Recover" hexmask.long.byte 0x0 8.--15. 1. "SYSRSTTIM,Time to Recover from Chip Reset" newline hexmask.long.byte 0x0 0.--7. 1. "PERRSTTIM,Time to Recover from the I3C peripheral" group.long 0x10C++0x7 line.long 0x0 "SCCCMASK,CCC Mask for Unhandled CCCs" bitfld.long 0x0 6. "VENDD,VENDD" "0: Suppressed,1: Passed to application" bitfld.long 0x0 5. "VENDB,VENDB" "0: Suppressed,1: Passed to application" newline bitfld.long 0x0 4. "MEXTD,MEXTD" "0: Suppressed,1: Passed to application" bitfld.long 0x0 3. "MEXTB,MEXTB" "0: Suppressed,1: Passed to application" newline bitfld.long 0x0 2. "BASEDX,BASEDX" "0: Suppressed,1: Passed to application" bitfld.long 0x0 1. "BASEBX,BASEBX" "0: Suppressed,1: Passed to application" newline bitfld.long 0x0 0. "BASE,Base" "0: Suppressed,1: Passed to application" line.long 0x4 "SERRWARNMASK,Target Errors and Warnings Mask" bitfld.long 0x4 11. "S0S1,S0S1 mask" "0: Deny,1: Allow" bitfld.long 0x4 10. "HCRC,HCRC mask" "0: Deny,1: Allow" newline bitfld.long 0x4 9. "HPAR,HPAR mask" "0: Deny,1: Allow" bitfld.long 0x4 8. "SPAR,SPAR mask" "0: Deny,1: Allow" newline bitfld.long 0x4 4. "INVSTART,INVSTART mask" "0: Deny,1: Allow" bitfld.long 0x4 3. "TERM,TERM mask" "0: Deny,1: Allow" newline bitfld.long 0x4 2. "URUNNACK,URUNNACK mask" "0: Deny,1: Allow" bitfld.long 0x4 1. "URUN,URUN mask" "0: Deny,1: Allow" newline bitfld.long 0x4 0. "ORUN,ORUN mask" "0: Deny,1: Allow" rgroup.long 0x11C++0x3 line.long 0x0 "SMAPCTRL0,Map Feature Control 0" bitfld.long 0x0 8.--10. "CAUSE,Cause" "0: No information. This value occurs when not..,1: Set using ENTDAA,2: Set using SETDASA SETAASA or SETNEWDA,3: Cleared using RSTDAA,4: Auto MAP change happened last. The change may..,?,?,?" hexmask.long.byte 0x0 1.--7. 1. "DA,Dynamic Address" newline bitfld.long 0x0 0. "ENA,Enable Primary Dynamic Address" "0: Disable,1: Enable" group.long 0x120++0x3 line.long 0x0 "SMAPCTRL1,Map Feature Control 1" hexmask.long.byte 0x0 24.--31. 1. "DCR,DCR" bitfld.long 0x0 13. "AUTO,Auto DAA" "0: Disabled,1: Enabled" newline bitfld.long 0x0 12. "NACK,Not Acknowledged" "0: Do not always NACK messages,1: Always NACK messages" bitfld.long 0x0 9.--11. "SA10B,Static Address 10-bit Extension" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 8. "MAPSA,MAP Static Address" "0: I3C Dynamic Address,1: Static Address (I2C style)" hexmask.long.byte 0x0 1.--7. 1. "ADDR,Address" newline bitfld.long 0x0 0. "ENA,Enable" "0: Disable,1: Enable" group.long 0x140++0x7 line.long 0x0 "IBIEXT1,Extended IBI Data 1" hexmask.long.byte 0x0 24.--31. 1. "EXT3,Extra byte 3" hexmask.long.byte 0x0 16.--23. 1. "EXT2,Extra byte 2" newline hexmask.long.byte 0x0 8.--15. 1. "EXT1,Extra byte 1" rbitfld.long 0x0 4.--6. "MAX,Maximum" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0.--2. "CNT,Count" "0,1,2,3,4,5,6,7" line.long 0x4 "IBIEXT2,Extended IBI Data 2" hexmask.long.byte 0x4 24.--31. 1. "EXT7,Extra byte 7" hexmask.long.byte 0x4 16.--23. 1. "EXT6,Extra byte 6" newline hexmask.long.byte 0x4 8.--15. 1. "EXT5,Extra byte 5" hexmask.long.byte 0x4 0.--7. 1. "EXT4,Extra byte 4" group.long 0xFF0++0x3 line.long 0x0 "SELFRESET,Self Reset" hexmask.long.tbyte 0x0 8.--31. 1. "KEY,Key" bitfld.long 0x0 0. "RST,Reset" "0: No reset,1: Reset" tree.end tree "WAKEUP_LPI2C" tree "LPI2C3" base ad:0x42530000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree "LPI2C4" base ad:0x42540000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree "LPI2C5" base ad:0x426B0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree "LPI2C6" base ad:0x426C0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree "LPI2C7" base ad:0x426D0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree "LPI2C8" base ad:0x426E0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--11. 1. "MRXFIFO,Controller Receive FIFO Size" hexmask.long.byte 0x4 0.--3. 1. "MTXFIFO,Controller Transmit FIFO Size" group.long 0x10++0x1F line.long 0x0 "MCR,Controller Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive FIFO is reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Transmit FIFO is reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Controller is disabled in debug mode,1: Controller is enabled in debug mode" bitfld.long 0x0 2. "DOZEN,Doze mode enable" "0: Controller is enabled in doze mode,1: Controller is disabled in doze mode" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Controller Enable" "0: Disabled,1: Enabled" line.long 0x4 "MSR,Controller Status" rbitfld.long 0x4 25. "BBF,Bus Busy Flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "MBF,Controller Busy Flag" "0: Idle,1: Busy" newline eventfld.long 0x4 15. "STF,START Flag" "0: START condition not detected.,1: START condition detected." eventfld.long 0x4 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x4 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" eventfld.long 0x4 12. "FEF,FIFO Error Flag" "0: No error,1: Controller sending or receiving data without a.." newline eventfld.long 0x4 11. "ALF,Arbitration Lost Flag" "0: Controller has not lost arbitration,1: Controller has lost arbitration" eventfld.long 0x4 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" newline eventfld.long 0x4 9. "SDF,STOP Detect Flag" "0: Controller has not generated a STOP condition,1: Controller has generated a STOP condition" eventfld.long 0x4 8. "EPF,End Packet Flag" "0: Controller has not generated a STOP or Repeated..,1: Controller has generated a STOP or Repeated.." newline rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" line.long 0x8 "MIER,Controller Interrupt Enable" bitfld.long 0x8 15. "STIE,START Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "DMIE,Data Match Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "FEIE,FIFO Error Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "ALIE,Arbitration Lost Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "NDIE,NACK Detect Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP Detect Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "EPIE,End Packet Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disabled,1: Enabled" line.long 0xC "MDER,Controller DMA Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "MCFGR0,Controller Configuration 0" bitfld.long 0x10 17. "ABORT,Abort Transfer" "0: Normal transfer,1: Abort existing transfer and do not start new.." bitfld.long 0x10 16. "RELAX,Relaxed Mode" "0: Normal transfer,1: Relaxed transfer" newline bitfld.long 0x10 9. "RDMO,Receive data match only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the Data Match.." bitfld.long 0x10 8. "CIRFIFO,Circular FIFO enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x10 2. "HRSEL,Host request select" "?,1: Host request input is input trigger" bitfld.long 0x10 1. "HRPOL,Host request polarity" "0: Active low,1: Active high" newline bitfld.long 0x10 0. "HREN,Host request enable" "0: Host request input is disabled,1: Host request input is enabled" line.long 0x14 "MCFGR1,Controller Configuration 1" bitfld.long 0x14 24.--26. "PINCFG,Pin Configuration" "0: Two-pin open drain mode,1: Two-pin output only mode (ultra-fast mode),2: Two-pin push-pull mode,3: Four-pin push-pull mode,4: Two-pin open drain mode with separate LPI2C target,5: Two-pin output only mode (ultra-fast mode) with..,6: Two-pin push-pull mode with separate LPI2C target,7: Four-pin push-pull mode (inverted outputs)" bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (first data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (first data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (first data word AND..,7: Match is enabled (any data word AND MDMR[MATCH1].." newline bitfld.long 0x14 12. "STARTCFG,START Configuration" "0: MSR[STF] asserts on START condition provided..,1: MSR[STF] asserts on START condition provided I2C.." bitfld.long 0x14 11. "STOPCFG,STOP Configuration" "0: MSR[SDF] asserts on any STOP condition generated..,1: MSR[SDF] asserts on last STOP condition before.." newline bitfld.long 0x14 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] becomes 1 if SCL is low for longer..,1: MSR[PLTF] becomes 1 if either SCL or SDA is low.." bitfld.long 0x14 9. "IGNACK,Ignore NACK" "0: No effect,1: LPI2C controller treats a received NACK as if it.." newline bitfld.long 0x14 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated when.." bitfld.long 0x14 0.--2. "PRESCALE,Prescaler" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x18 "MCFGR2,Controller Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch Filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch Filter SCL" newline hexmask.long.word 0x18 0.--11. 1. "BUSIDLE,Bus Idle Timeout" line.long 0x1C "MCFGR3,Controller Configuration 3" hexmask.long.word 0x1C 8.--19. 1. "PINLOW,Pin low timeout" group.long 0x40++0x3 line.long 0x0 "MDMR,Controller Data Match" hexmask.long.byte 0x0 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x0 0.--7. 1. "MATCH0,Match 0 Value" group.long 0x48++0x3 line.long 0x0 "MCCR0,Controller Clock Configuration 0" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x50++0x3 line.long 0x0 "MCCR1,Controller Clock Configuration 1" hexmask.long.byte 0x0 24.--29. 1. "DATAVD,Data Valid Delay" hexmask.long.byte 0x0 16.--21. 1. "SETHOLD,Setup Hold Delay" newline hexmask.long.byte 0x0 8.--13. 1. "CLKHI,Clock High Period" hexmask.long.byte 0x0 0.--5. 1. "CLKLO,Clock Low Period" group.long 0x58++0x3 line.long 0x0 "MFCR,Controller FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "MFSR,Controller FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" wgroup.long 0x60++0x3 line.long 0x0 "MTDR,Controller Transmit Data" bitfld.long 0x0 8.--10. "CMD,Command Data" "0: Transmit DATA[7:0],1: Receive (DATA[7:0] + 1) bytes,2: Generate STOP condition,3: Receive and discard (DATA[7:0] + 1) bytes,4: Generate (repeated) START and transmit address..,5: Generate (repeated) START and transmit address..,6: Generate (repeated) START and transmit address..,7: Generate (repeated) START and transmit address.." hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x3 line.long 0x0 "MRDR,Controller Receive Data" bitfld.long 0x0 14. "RXEMPTY,Receive Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" rgroup.long 0x78++0x3 line.long 0x0 "MRDROR,Controller Receive Data Read Only" bitfld.long 0x0 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x1B line.long 0x0 "SCR,Target Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Receive Data Register is now empty." bitfld.long 0x0 8. "RTF,Reset transmit FIFO" "0: No effect,1: Transmit Data Register is now empty." newline bitfld.long 0x0 5. "FILTDZ,Filter doze enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x0 4. "FILTEN,Filter enable" "0: Disable digital filter and output delay counter..,1: Enable digital filter and output delay counter.." newline bitfld.long 0x0 1. "RST,Software reset" "0: Target mode logic is not reset,1: Target mode logic is reset" bitfld.long 0x0 0. "SEN,Target Enable" "0: I2C Target mode is disabled,1: I2C Target mode is enabled" line.long 0x4 "SSR,Target Status" rbitfld.long 0x4 25. "BBF,Bus busy flag" "0: Idle,1: Busy" rbitfld.long 0x4 24. "SBF,Target busy flag" "0: Idle,1: Busy" newline rbitfld.long 0x4 15. "SARF,SMBus alert response flag" "0: SMBus alert response is disabled or not detected,1: SMBus alert response is enabled and detected" rbitfld.long 0x4 14. "GCF,General call flag" "0: Target has not detected the General Call Address..,1: Target has detected the General Call Address" newline rbitfld.long 0x4 13. "AM1F,Address match 1 flag" "0: ADDR1 or ADDR0/ADDR1 range matching address not..,1: ADDR1 or ADDR0/ADDR1 range matching address.." rbitfld.long 0x4 12. "AM0F,Address match 0 flag" "0: ADDR0 matching address not received,1: ADDR0 matching address received" newline eventfld.long 0x4 11. "FEF,FIFO error flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x4 10. "BEF,Bit error flag" "0: Target has not detected a bit error,1: Target has detected a bit error" newline eventfld.long 0x4 9. "SDF,STOP detect flag" "0: Target has not detected a STOP condition,1: Target has detected a STOP condition" eventfld.long 0x4 8. "RSF,Repeated start flag" "0: Target has not detected a Repeated START condition,1: Target has detected a Repeated START condition" newline rbitfld.long 0x4 3. "TAF,Transmit ACK flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x4 2. "AVF,Address valid flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x4 1. "RDF,Receive data flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x4 0. "TDF,Transmit data flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "SIER,Target interrupt enable" bitfld.long 0x8 15. "SARIE,SMBus alert response interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 14. "GCIE,General call interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 13. "AM1IE,Address match 1 interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 12. "AM0IE,Address match 0 interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 11. "FEIE,FIFO error interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 10. "BEIE,Bit error interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 9. "SDIE,STOP detect interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 8. "RSIE,Repeated start interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 3. "TAIE,Transmit ACK interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 2. "AVIE,Address valid interrupt enable" "0: Disabled,1: Enabled" newline bitfld.long 0x8 1. "RDIE,Receive data interrupt enable" "0: Disabled,1: Enabled" bitfld.long 0x8 0. "TDIE,Transmit data interrupt enable" "0: Disabled,1: Enabled" line.long 0xC "SDER,Target DMA Enable" bitfld.long 0xC 9. "SDDE,Stop detect DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 8. "RSDE,Repeated start DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 2. "AVDE,Address valid DMA enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0xC 1. "RDDE,Receive data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0xC 0. "TDDE,Transmit data DMA enable" "0: DMA request is disabled,1: DMA request is enabled" line.long 0x10 "SCFGR0,Target Configuration 0" rbitfld.long 0x10 1. "RDACK,Read Acknowledge" "0: Read Request not acknowledged,1: Read Request acknowledged" bitfld.long 0x10 0. "RDREQ,Read Request" "0: Disabled,1: Enabled" line.long 0x14 "SCFGR1,Target Configuration 1" bitfld.long 0x14 26. "SDCFG,Stop Detect Configuration" "0: Any STOP condition following an address match,1: Any STOP condition" bitfld.long 0x14 25. "RSCFG,Repeated start configuration" "0: Any repeated START condition following an..,1: Any repeated START condition" newline bitfld.long 0x14 24. "RXALL,Receive all" "0: Receive all disabled,1: Receive all enabled" bitfld.long 0x14 16.--18. "ADDRCFG,Address configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1 (7-bit),3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match 1..,7: From Address match 0 (10-bit) to Address match 1.." newline bitfld.long 0x14 13. "HSMEN,High-speed mode enable" "0: Disable,1: Enable" bitfld.long 0x14 12. "IGNACK,Ignore NACK" "0: Target ends transfer when NACK is detected,1: Target does not end transfer when NACK detected" newline bitfld.long 0x14 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." bitfld.long 0x14 10. "TXCFG,Transmit flag configuration" "0: MSR[TDF] becomes 1 only during a target-transmit..,1: MSR[TDF] becomes 1 whenever the Transmit Data.." newline bitfld.long 0x14 9. "SAEN,SMBus alert enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" bitfld.long 0x14 8. "GCEN,General call enable" "0: General Call address is disabled,1: General Call address is enabled" newline bitfld.long 0x14 4. "RXNACK,Receive NACK" "0: ACK/NACK always written 1 by TXNACK,1: NACK always generated on address overrun or.." bitfld.long 0x14 3. "ACKSTALL,ACK SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 2. "TXDSTALL,Transmit data SCL stall" "0: Disabled,1: Enabled" bitfld.long 0x14 1. "RXSTALL,RX SCL stall" "0: Disabled,1: Enabled" newline bitfld.long 0x14 0. "ADRSTALL,Address SCL stall" "0: Disabled,1: Enabled" line.long 0x18 "SCFGR2,Target Configuration 2" hexmask.long.byte 0x18 24.--27. 1. "FILTSDA,Glitch filter SDA" hexmask.long.byte 0x18 16.--19. 1. "FILTSCL,Glitch filter SCL" newline hexmask.long.byte 0x18 8.--13. 1. "DATAVD,Data valid delay" hexmask.long.byte 0x18 0.--3. 1. "CLKHOLD,Clock hold time" group.long 0x140++0x3 line.long 0x0 "SAMR,Target Address Match" hexmask.long.word 0x0 17.--26. 1. "ADDR1,Address 1 value" hexmask.long.word 0x0 1.--10. 1. "ADDR0,Address 0 value" rgroup.long 0x150++0x3 line.long 0x0 "SASR,Target Address Status" bitfld.long 0x0 14. "ANV,Address not valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x0 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x3 line.long 0x0 "STAR,Target Transmit ACK" bitfld.long 0x0 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x3 line.long 0x0 "STDR,Target Transmit Data" hexmask.long.byte 0x0 0.--7. 1. "DATA,Transmit data" rgroup.long 0x170++0x3 line.long 0x0 "SRDR,Target Receive Data" bitfld.long 0x0 15. "SOF,Start of frame" "0: Not the first data word since a (repeated) START..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" rgroup.long 0x178++0x3 line.long 0x0 "SRDROR,Target Receive Data Read Only" bitfld.long 0x0 15. "SOF,Start of frame" "0: Is not the first data word since a (repeated)..,1: Is the first data word since a (repeated) START.." bitfld.long 0x0 14. "RXEMPTY,Receive empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x0 8.--10. "RADDR,Received address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Receive data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "MTCBR[$1],Controller Transmit Command Burst" bitfld.long 0x0 8.--10. "CMD,Command" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--7. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "MTDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data" repeat.end tree.end tree.end tree "WAKEUP_LPIT" base ad:0x424C0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "EXT_TRIG,Number of External Trigger Inputs" hexmask.long.byte 0x4 0.--7. 1. "CHANNEL,Number of Timer Channels" group.long 0x8++0x13 line.long 0x0 "MCR,Module Control" bitfld.long 0x0 3. "DBG_EN,Debug Mode Enable" "0: Stops timer channels,1: Allows timer channels to continue running" bitfld.long 0x0 2. "DOZE_EN,DOZE Mode Enable" "0: Stops timer channels,1: Allows timer channels to continue running" newline bitfld.long 0x0 1. "SW_RST,Software Reset" "0: Does not reset,1: Resets" bitfld.long 0x0 0. "M_CEN,Module Clock Enable" "0: Disable,1: Enable" line.long 0x4 "MSR,Module Status" eventfld.long 0x4 3. "TIF3,Channel 3 Timer Interrupt Flag" "0: Not timed out,1: Timed out" eventfld.long 0x4 2. "TIF2,Channel 2 Timer Interrupt Flag" "0: Not timed out,1: Timed out" newline eventfld.long 0x4 1. "TIF1,Channel 1 Timer Interrupt Flag" "0: Not timed out,1: Timed out" eventfld.long 0x4 0. "TIF0,Channel 0 Timer Interrupt Flag" "0: Not timed out,1: Timed out" line.long 0x8 "MIER,Module Interrupt Enable" bitfld.long 0x8 3. "TIE3,Channel 3 Timer Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 2. "TIE2,Channel 2 Timer Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "TIE1,Channel 1 Timer Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TIE0,Channel 0 Timer Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "SETTEN,Set Timer Enable" bitfld.long 0xC 3. "SET_T_EN_3,Set Timer 3 Enable" "0: No effect,1: Enables timer channel 3" bitfld.long 0xC 2. "SET_T_EN_2,Set Timer 2 Enable" "0: No Effect,1: Enables timer channel 2" newline bitfld.long 0xC 1. "SET_T_EN_1,Set Timer 1 Enable" "0: No Effect,1: Enables timer channel 1" bitfld.long 0xC 0. "SET_T_EN_0,Set Timer 0 Enable" "0: No effect,1: Enables timer channel 0" line.long 0x10 "CLRTEN,Clear Timer Enable" bitfld.long 0x10 3. "CLR_T_EN_3,Clear Timer 3 Enable" "0: No action,1: Turns TCTRL3[T_EN] = 0 for timer channel 3" bitfld.long 0x10 2. "CLR_T_EN_2,Clear Timer 2 Enable" "0: No action,1: Turns TCTRL2[T_EN] = 0 for timer channel 2" newline bitfld.long 0x10 1. "CLR_T_EN_1,Clear Timer 1 Enable" "0: No action,1: Turns TCTRL1[T_EN] = 0 for timer channel 1" bitfld.long 0x10 0. "CLR_T_EN_0,Clear Timer 0 Enable" "0: No action,1: Turns TCTRL0[T_EN] = 0 for timer channel 0" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x424C0020 ad:0x424C0030 ad:0x424C0040 ad:0x424C0050) tree "CHANNEL[$1]" base $2 group.long ($2)++0x3 line.long 0x0 "TVAL,Timer Value" hexmask.long 0x0 0.--31. 1. "TMR_VAL,Timer Value" rgroup.long ($2+0x4)++0x3 line.long 0x0 "CVAL,Current Timer Value" hexmask.long 0x0 0.--31. 1. "TMR_CUR_VAL,Current Timer Value" group.long ($2+0x8)++0x3 line.long 0x0 "TCTRL,Timer Control" hexmask.long.byte 0x0 24.--27. 1. "TRG_SEL,Trigger Select" bitfld.long 0x0 23. "TRG_SRC,Trigger Source" "0: External,1: Internal" bitfld.long 0x0 18. "TROT,Timer Reload on Trigger" "0: Does not reload,1: Reloads" newline bitfld.long 0x0 17. "TSOI,Timer Stop on Interrupt" "0: Does not stop,1: Stops" bitfld.long 0x0 16. "TSOT,Timer Start on Trigger" "0: Immediately,1: When a rising edge is detected" bitfld.long 0x0 2.--3. "MODE,Timer Operation Mode" "0: 32-bit periodic counter,1: Dual 16-bit periodic counter,2: 32-bit trigger accumulator,3: 32-bit trigger input capture" newline bitfld.long 0x0 1. "CHAIN,Chain Channel" "0: Disabled,1: Enabled" bitfld.long 0x0 0. "T_EN,Timer Enable" "0: Disable,1: Enable" tree.end repeat.end tree.end tree "WAKEUP_LPSPI" tree "LPSPI3" base ad:0x42550000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree "LPSPI4" base ad:0x42560000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--10. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3,4,5,6,7" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24.--25. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1],2: Transfer using PCS[2],?" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree "LPSPI5" base ad:0x426F0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree "LPSPI6" base ad:0x42700000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree "LPSPI7" base ad:0x42710000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree "LPSPI8" base ad:0x42720000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Module Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x17 line.long 0x0 "CR,Control" bitfld.long 0x0 9. "RRF,Reset Receive FIFO" "0: No effect,1: Reset" bitfld.long 0x0 8. "RTF,Reset Transmit FIFO" "0: No effect,1: Reset" newline bitfld.long 0x0 3. "DBGEN,Debug Enable" "0: Disable,1: Enable" bitfld.long 0x0 2. "DOZEN,Doze Mode Enable" "0: Enable,1: Disable" newline bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" bitfld.long 0x0 0. "MEN,Module Enable" "0: Disable,1: Enable" line.long 0x4 "SR,Status" rbitfld.long 0x4 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x4 13. "DMF,Data Match Flag" "0: No match,1: Match" newline eventfld.long 0x4 12. "REF,Receive Error Flag" "0: No overflow,1: Overflow" eventfld.long 0x4 11. "TEF,Transmit Error Flag" "0: No underrun,1: Underrun" newline eventfld.long 0x4 10. "TCF,Transfer Complete Flag" "0: Not complete,1: Complete" eventfld.long 0x4 9. "FCF,Frame Complete Flag" "0: Not complete,1: Complete" newline eventfld.long 0x4 8. "WCF,Word Complete Flag" "0: Not complete,1: Complete" rbitfld.long 0x4 1. "RDF,Receive Data Flag" "0: Receive data not ready,1: Receive data is ready" newline rbitfld.long 0x4 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" line.long 0x8 "IER,Interrupt Enable" bitfld.long 0x8 13. "DMIE,Data Match Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 12. "REIE,Receive Error Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 11. "TEIE,Transmit Error Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 10. "TCIE,Transfer Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 9. "FCIE,Frame Complete Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 8. "WCIE,Word Complete Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x8 1. "RDIE,Receive Data Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "TDIE,Transmit Data Interrupt Enable" "0: Disable,1: Enable" line.long 0xC "DER,DMA Enable" bitfld.long 0xC 9. "FCDE,Frame Complete DMA Enable" "0: Disable,1: Enable" bitfld.long 0xC 1. "RDDE,Receive Data DMA Enable" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "TDDE,Transmit Data DMA Enable" "0: Disable,1: Enable" line.long 0x10 "CFGR0,Configuration 0" bitfld.long 0x10 9. "RDMO,Receive Data Match Only" "0: Disable,1: Enable" bitfld.long 0x10 8. "CIRFIFO,Circular FIFO Enable" "0: Disable,1: Enable" line.long 0x14 "CFGR1,Configuration 1" bitfld.long 0x14 26. "OUTCFG,Output Configuration" "0: Output data retains last value.,1: Output data is 3-stated." bitfld.long 0x14 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data; SOUT is used for..,1: SIN is used for both input and output data. Only..,2: SOUT is used for both input and output data.,3: SOUT is used for input data; SIN is used for.." newline bitfld.long 0x14 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match first data word with compare word,3: Match any data word with compare word,4: Sequential match first data word,5: Sequential match any data word,6: Match first data word (masked) with compare word..,7: Match any data word (masked) with compare word.." bitfld.long 0x14 8.--9. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3" newline bitfld.long 0x14 4. "PARTIAL,Partial Enable" "0: Discard,1: Store" bitfld.long 0x14 3. "NOSTALL,No Stall" "0: Disable,1: Enable" newline bitfld.long 0x14 2. "AUTOPCS,Automatic PCS" "0: Disable,1: Enable" bitfld.long 0x14 1. "SAMPLE,Sample Point" "0: SCK edge,1: Delayed SCK edge" newline bitfld.long 0x14 0. "MASTER,Master Mode" "0: Slave mode,1: Master mode" group.long 0x30++0x7 line.long 0x0 "DMR0,Data Match 0" hexmask.long 0x0 0.--31. 1. "MATCH0,Match 0 Value" line.long 0x4 "DMR1,Data Match 1" hexmask.long 0x4 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x7 line.long 0x0 "CCR,Clock Configuration" hexmask.long.byte 0x0 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x0 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x0 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x0 0.--7. 1. "SCKDIV,SCK Divider" line.long 0x4 "CCR1,Clock Configuration 1" hexmask.long.byte 0x4 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x4 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x4 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x4 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x3 line.long 0x0 "FCR,FIFO Control" bitfld.long 0x0 16.--18. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x0 0.--2. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7" rgroup.long 0x5C++0x3 line.long 0x0 "FSR,FIFO Status" hexmask.long.byte 0x0 16.--19. 1. "RXCOUNT,Receive FIFO Count" hexmask.long.byte 0x0 0.--3. 1. "TXCOUNT,Transmit FIFO Count" group.long 0x60++0x3 line.long 0x0 "TCR,Transmit Command" bitfld.long 0x0 31. "CPOL,Clock Polarity" "0: Inactive low,1: Inactive high" bitfld.long 0x0 30. "CPHA,Clock Phase" "0: Captured,1: Changed" newline bitfld.long 0x0 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x0 24. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1]" newline bitfld.long 0x0 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x0 22. "BYSW,Byte Swap" "0: Disabled,1: Enabled" newline bitfld.long 0x0 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x0 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x0 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x0 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline hexmask.long.word 0x0 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x3 line.long 0x0 "TDR,Transmit Data" hexmask.long 0x0 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0xB line.long 0x0 "RSR,Receive Status" bitfld.long 0x0 1. "RXEMPTY,RX FIFO Empty" "0: Not empty,1: Empty" bitfld.long 0x0 0. "SOF,Start Of Frame" "0: Subsequent data word,1: First data word" line.long 0x4 "RDR,Receive Data" hexmask.long 0x4 0.--31. 1. "DATA,Receive Data" line.long 0x8 "RDROR,Receive Data Read Only" hexmask.long 0x8 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x3 line.long 0x0 "TCBR,Transmit Command Burst" hexmask.long 0x0 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x600)++0x3 line.long 0x0 "RDBR[$1],Receive Data Burst" hexmask.long 0x0 0.--31. 1. "DATA,Data" repeat.end tree.end tree.end tree "WAKEUP_LPTMR" base ad:0x424D0000 group.long 0x0++0xF line.long 0x0 "CSR,Control Status" bitfld.long 0x0 8. "TDRE,Timer DMA Request Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TCF,Timer Compare Flag" "0: CNR != (CMR + 1),1: CNR = (CMR + 1)" bitfld.long 0x0 6. "TIE,Timer Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 4.--5. "TPS,Timer Pin Select" "0: Input 0,1: Input 1,2: Input 2,3: Input 3" newline bitfld.long 0x0 3. "TPP,Timer Pin Polarity" "0: Active-high,1: Active-low" bitfld.long 0x0 2. "TFC,Timer Free-Running Counter" "0: Reset if TCF set,1: Reset on overflow" bitfld.long 0x0 1. "TMS,Timer Mode Select" "0: Time Counter mode,1: Pulse Counter mode" bitfld.long 0x0 0. "TEN,Timer Enable" "0: Disable,1: Enable" line.long 0x4 "PSR,Prescale and Glitch Filter" hexmask.long.byte 0x4 3.--6. 1. "PRESCALE,Prescale/Glitch Filter Value" bitfld.long 0x4 2. "PBYP,Prescaler/Glitch Filter Bypass" "0: Prescaler/glitch filter enable,1: Prescaler/glitch filter bypass" bitfld.long 0x4 0.--1. "PCS,Prescaler/Glitch Filter Clock Select" "0: Clock 0,1: Clock 1,2: Clock 2,3: Clock 3" line.long 0x8 "CMR,Compare" hexmask.long 0x8 0.--31. 1. "COMPARE,Compare Value" line.long 0xC "CNR,Counter" hexmask.long 0xC 0.--31. 1. "COUNTER,Counter Value" tree.end tree "WAKEUP_LPTPM" tree "TPM3" base ad:0x424E0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x4 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x4 0.--7. 1. "CHAN,Channel Count" group.long 0x8++0x3 line.long 0x0 "GLOBAL,TPM Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x0 0. "NOUPDATE,No Update" "0: Internal double-buffered registers update as..,1: Internal double-buffered registers do not update" group.long 0x10++0xF line.long 0x0 "SC,Status and Control" bitfld.long 0x0 8. "DMA,DMA Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" newline bitfld.long 0x0 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "CPWMS,Center-Aligned PWM Select" "0: Up counting mode,1: Up-down counting mode" newline bitfld.long 0x0 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter clock,2: TPM counter increments on the rising edge of..,3: TPM counter increments on the rising edge of the.." bitfld.long 0x0 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x4 "CNT,Counter" hexmask.long 0x4 0.--31. 1. "COUNT,Counter Value" line.long 0x8 "MOD,Modulo" hexmask.long 0x8 0.--31. 1. "MOD,Modulo Value" line.long 0xC "STATUS,Capture and Compare Status" eventfld.long 0xC 8. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0xC 3. "CH3F,Channel 3 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 2. "CH2F,Channel 2 Flag" "0: Event not occurred,1: Event occurred" eventfld.long 0xC 1. "CH1F,Channel 1 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 0. "CH0F,Channel 0 Flag" "0: Event not occurred,1: Event occurred" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x424E0020 ad:0x424E0028 ad:0x424E0030 ad:0x424E0038) tree "CHANNEL[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CSC,Channel n Status and Control" eventfld.long 0x0 7. "CHF,Channel Flag" "0: Event not occurred,1: Event occurred" bitfld.long 0x0 6. "CHIE,Channel Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "MSB,Channel Mode Select B" "0,1" bitfld.long 0x0 4. "MSA,Channel Mode Select A" "0,1" bitfld.long 0x0 3. "ELSB,Edge or Level Select B" "0,1" bitfld.long 0x0 2. "ELSA,Edge or Level Select A" "0,1" bitfld.long 0x0 0. "DMA,DMA Enable" "0: Disable,1: Enable" line.long 0x4 "CV,Channel n Value" hexmask.long 0x4 0.--31. 1. "VAL,Channel Value" tree.end repeat.end base ad:0x424E0000 group.long 0x64++0x3 line.long 0x0 "COMBINE,Combine Channel" bitfld.long 0x0 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 8. "COMBINE1,Combine Channels 2 and 3" "0: Independent,1: Combined" newline bitfld.long 0x0 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 0. "COMBINE0,Combine Channels 0 and 1" "0: Independent,1: Combined" group.long 0x6C++0x7 line.long 0x0 "TRIG,Channel Trigger" bitfld.long 0x0 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 3" bitfld.long 0x0 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 2" newline bitfld.long 0x0 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 1" bitfld.long 0x0 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 0" line.long 0x4 "POL,Channel Polarity" bitfld.long 0x4 3. "POL3,Channel 3 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 2. "POL2,Channel 2 Polarity" "0: Active high,1: Active low" newline bitfld.long 0x4 1. "POL1,Channel 1 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 0. "POL0,Channel 0 Polarity" "0: Active high,1: Active low" group.long 0x78++0x3 line.long 0x0 "FILTER,Filter Control" hexmask.long.byte 0x0 12.--15. 1. "CH3FVAL,Channel 3 Filter Value" hexmask.long.byte 0x0 8.--11. 1. "CH2FVAL,Channel 2 Filter Value" newline hexmask.long.byte 0x0 4.--7. 1. "CH1FVAL,Channel 1 Filter Value" hexmask.long.byte 0x0 0.--3. 1. "CH0FVAL,Channel 0 Filter Value" group.long 0x80++0x7 line.long 0x0 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x0 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x0 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Decreasing (counter decrement),1: Increasing (counter increment)" newline rbitfld.long 0x0 1. "TOFDIR,Timer Overflow Direction" "0: Bottom of counting,1: Top of counting" bitfld.long 0x0 0. "QUADEN,Quadrature Decoder Enable" "0: Disable,1: Enable" line.long 0x4 "CONF,Configuration" bitfld.long 0x4 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or channel 1 pin input capture" bitfld.long 0x4 23. "TRGSRC,Trigger Source" "0: External,1: Internal (channel pin input capture)" newline bitfld.long 0x4 22. "TRGPOL,Trigger Polarity" "0: Active high,1: Active low" bitfld.long 0x4 19. "CPOT,Counter Pause on Trigger" "0: TPM counter continues,1: TPM counter pauses" newline bitfld.long 0x4 18. "CROT,Counter Reload on Trigger" "0: No reload,1: Reload" bitfld.long 0x4 17. "CSOO,Counter Stop on Overflow" "0: TPM counter continues,1: TPM counter stops" newline bitfld.long 0x4 16. "CSOT,Counter Start on Trigger" "0: Counter starts immediately,1: Counter starts after detection of a rising edge.." bitfld.long 0x4 9. "GTBEEN,GTB Enable" "0: Internally generated TPM counter,1: Externally generated GTB counter" newline bitfld.long 0x4 8. "GTBSYNC,GTB Synchronization" "0: Disable,1: Enable" bitfld.long 0x4 6.--7. "DBGMODE,Debug Mode" "0: TPM counter pauses,?,?,3: TPM counter continues" newline bitfld.long 0x4 5. "DOZEEN,Doze Enable" "0: TPM counter continues,1: TPM counter pauses" tree.end tree "TPM4" base ad:0x424F0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x4 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x4 0.--7. 1. "CHAN,Channel Count" group.long 0x8++0x3 line.long 0x0 "GLOBAL,TPM Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x0 0. "NOUPDATE,No Update" "0: Internal double-buffered registers update as..,1: Internal double-buffered registers do not update" group.long 0x10++0xF line.long 0x0 "SC,Status and Control" bitfld.long 0x0 8. "DMA,DMA Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" newline bitfld.long 0x0 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "CPWMS,Center-Aligned PWM Select" "0: Up counting mode,1: Up-down counting mode" newline bitfld.long 0x0 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter clock,2: TPM counter increments on the rising edge of..,3: TPM counter increments on the rising edge of the.." bitfld.long 0x0 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x4 "CNT,Counter" hexmask.long 0x4 0.--31. 1. "COUNT,Counter Value" line.long 0x8 "MOD,Modulo" hexmask.long 0x8 0.--31. 1. "MOD,Modulo Value" line.long 0xC "STATUS,Capture and Compare Status" eventfld.long 0xC 8. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0xC 3. "CH3F,Channel 3 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 2. "CH2F,Channel 2 Flag" "0: Event not occurred,1: Event occurred" eventfld.long 0xC 1. "CH1F,Channel 1 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 0. "CH0F,Channel 0 Flag" "0: Event not occurred,1: Event occurred" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x424F0020 ad:0x424F0028 ad:0x424F0030 ad:0x424F0038) tree "CHANNEL[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CSC,Channel n Status and Control" eventfld.long 0x0 7. "CHF,Channel Flag" "0: Event not occurred,1: Event occurred" bitfld.long 0x0 6. "CHIE,Channel Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "MSB,Channel Mode Select B" "0,1" bitfld.long 0x0 4. "MSA,Channel Mode Select A" "0,1" bitfld.long 0x0 3. "ELSB,Edge or Level Select B" "0,1" bitfld.long 0x0 2. "ELSA,Edge or Level Select A" "0,1" bitfld.long 0x0 0. "DMA,DMA Enable" "0: Disable,1: Enable" line.long 0x4 "CV,Channel n Value" hexmask.long 0x4 0.--31. 1. "VAL,Channel Value" tree.end repeat.end base ad:0x424F0000 group.long 0x64++0x3 line.long 0x0 "COMBINE,Combine Channel" bitfld.long 0x0 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 8. "COMBINE1,Combine Channels 2 and 3" "0: Independent,1: Combined" newline bitfld.long 0x0 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 0. "COMBINE0,Combine Channels 0 and 1" "0: Independent,1: Combined" group.long 0x6C++0x7 line.long 0x0 "TRIG,Channel Trigger" bitfld.long 0x0 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 3" bitfld.long 0x0 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 2" newline bitfld.long 0x0 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 1" bitfld.long 0x0 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 0" line.long 0x4 "POL,Channel Polarity" bitfld.long 0x4 3. "POL3,Channel 3 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 2. "POL2,Channel 2 Polarity" "0: Active high,1: Active low" newline bitfld.long 0x4 1. "POL1,Channel 1 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 0. "POL0,Channel 0 Polarity" "0: Active high,1: Active low" group.long 0x78++0x3 line.long 0x0 "FILTER,Filter Control" hexmask.long.byte 0x0 12.--15. 1. "CH3FVAL,Channel 3 Filter Value" hexmask.long.byte 0x0 8.--11. 1. "CH2FVAL,Channel 2 Filter Value" newline hexmask.long.byte 0x0 4.--7. 1. "CH1FVAL,Channel 1 Filter Value" hexmask.long.byte 0x0 0.--3. 1. "CH0FVAL,Channel 0 Filter Value" group.long 0x80++0x7 line.long 0x0 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x0 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x0 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Decreasing (counter decrement),1: Increasing (counter increment)" newline rbitfld.long 0x0 1. "TOFDIR,Timer Overflow Direction" "0: Bottom of counting,1: Top of counting" bitfld.long 0x0 0. "QUADEN,Quadrature Decoder Enable" "0: Disable,1: Enable" line.long 0x4 "CONF,Configuration" bitfld.long 0x4 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or channel 1 pin input capture" bitfld.long 0x4 23. "TRGSRC,Trigger Source" "0: External,1: Internal (channel pin input capture)" newline bitfld.long 0x4 22. "TRGPOL,Trigger Polarity" "0: Active high,1: Active low" bitfld.long 0x4 19. "CPOT,Counter Pause on Trigger" "0: TPM counter continues,1: TPM counter pauses" newline bitfld.long 0x4 18. "CROT,Counter Reload on Trigger" "0: No reload,1: Reload" bitfld.long 0x4 17. "CSOO,Counter Stop on Overflow" "0: TPM counter continues,1: TPM counter stops" newline bitfld.long 0x4 16. "CSOT,Counter Start on Trigger" "0: Counter starts immediately,1: Counter starts after detection of a rising edge.." bitfld.long 0x4 9. "GTBEEN,GTB Enable" "0: Internally generated TPM counter,1: Externally generated GTB counter" newline bitfld.long 0x4 8. "GTBSYNC,GTB Synchronization" "0: Disable,1: Enable" bitfld.long 0x4 6.--7. "DBGMODE,Debug Mode" "0: TPM counter pauses,?,?,3: TPM counter continues" newline bitfld.long 0x4 5. "DOZEEN,Doze Enable" "0: TPM counter continues,1: TPM counter pauses" tree.end tree "TPM5" base ad:0x42500000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x4 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x4 0.--7. 1. "CHAN,Channel Count" group.long 0x8++0x3 line.long 0x0 "GLOBAL,TPM Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x0 0. "NOUPDATE,No Update" "0: Internal double-buffered registers update as..,1: Internal double-buffered registers do not update" group.long 0x10++0xF line.long 0x0 "SC,Status and Control" bitfld.long 0x0 8. "DMA,DMA Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" newline bitfld.long 0x0 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "CPWMS,Center-Aligned PWM Select" "0: Up counting mode,1: Up-down counting mode" newline bitfld.long 0x0 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter clock,2: TPM counter increments on the rising edge of..,3: TPM counter increments on the rising edge of the.." bitfld.long 0x0 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x4 "CNT,Counter" hexmask.long 0x4 0.--31. 1. "COUNT,Counter Value" line.long 0x8 "MOD,Modulo" hexmask.long 0x8 0.--31. 1. "MOD,Modulo Value" line.long 0xC "STATUS,Capture and Compare Status" eventfld.long 0xC 8. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0xC 3. "CH3F,Channel 3 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 2. "CH2F,Channel 2 Flag" "0: Event not occurred,1: Event occurred" eventfld.long 0xC 1. "CH1F,Channel 1 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 0. "CH0F,Channel 0 Flag" "0: Event not occurred,1: Event occurred" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x42500020 ad:0x42500028 ad:0x42500030 ad:0x42500038) tree "CHANNEL[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CSC,Channel n Status and Control" eventfld.long 0x0 7. "CHF,Channel Flag" "0: Event not occurred,1: Event occurred" bitfld.long 0x0 6. "CHIE,Channel Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "MSB,Channel Mode Select B" "0,1" bitfld.long 0x0 4. "MSA,Channel Mode Select A" "0,1" bitfld.long 0x0 3. "ELSB,Edge or Level Select B" "0,1" bitfld.long 0x0 2. "ELSA,Edge or Level Select A" "0,1" bitfld.long 0x0 0. "DMA,DMA Enable" "0: Disable,1: Enable" line.long 0x4 "CV,Channel n Value" hexmask.long 0x4 0.--31. 1. "VAL,Channel Value" tree.end repeat.end base ad:0x42500000 group.long 0x64++0x3 line.long 0x0 "COMBINE,Combine Channel" bitfld.long 0x0 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 8. "COMBINE1,Combine Channels 2 and 3" "0: Independent,1: Combined" newline bitfld.long 0x0 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 0. "COMBINE0,Combine Channels 0 and 1" "0: Independent,1: Combined" group.long 0x6C++0x7 line.long 0x0 "TRIG,Channel Trigger" bitfld.long 0x0 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 3" bitfld.long 0x0 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 2" newline bitfld.long 0x0 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 1" bitfld.long 0x0 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 0" line.long 0x4 "POL,Channel Polarity" bitfld.long 0x4 3. "POL3,Channel 3 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 2. "POL2,Channel 2 Polarity" "0: Active high,1: Active low" newline bitfld.long 0x4 1. "POL1,Channel 1 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 0. "POL0,Channel 0 Polarity" "0: Active high,1: Active low" group.long 0x78++0x3 line.long 0x0 "FILTER,Filter Control" hexmask.long.byte 0x0 12.--15. 1. "CH3FVAL,Channel 3 Filter Value" hexmask.long.byte 0x0 8.--11. 1. "CH2FVAL,Channel 2 Filter Value" newline hexmask.long.byte 0x0 4.--7. 1. "CH1FVAL,Channel 1 Filter Value" hexmask.long.byte 0x0 0.--3. 1. "CH0FVAL,Channel 0 Filter Value" group.long 0x80++0x7 line.long 0x0 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x0 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x0 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Decreasing (counter decrement),1: Increasing (counter increment)" newline rbitfld.long 0x0 1. "TOFDIR,Timer Overflow Direction" "0: Bottom of counting,1: Top of counting" bitfld.long 0x0 0. "QUADEN,Quadrature Decoder Enable" "0: Disable,1: Enable" line.long 0x4 "CONF,Configuration" bitfld.long 0x4 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or channel 1 pin input capture" bitfld.long 0x4 23. "TRGSRC,Trigger Source" "0: External,1: Internal (channel pin input capture)" newline bitfld.long 0x4 22. "TRGPOL,Trigger Polarity" "0: Active high,1: Active low" bitfld.long 0x4 19. "CPOT,Counter Pause on Trigger" "0: TPM counter continues,1: TPM counter pauses" newline bitfld.long 0x4 18. "CROT,Counter Reload on Trigger" "0: No reload,1: Reload" bitfld.long 0x4 17. "CSOO,Counter Stop on Overflow" "0: TPM counter continues,1: TPM counter stops" newline bitfld.long 0x4 16. "CSOT,Counter Start on Trigger" "0: Counter starts immediately,1: Counter starts after detection of a rising edge.." bitfld.long 0x4 9. "GTBEEN,GTB Enable" "0: Internally generated TPM counter,1: Externally generated GTB counter" newline bitfld.long 0x4 8. "GTBSYNC,GTB Synchronization" "0: Disable,1: Enable" bitfld.long 0x4 6.--7. "DBGMODE,Debug Mode" "0: TPM counter pauses,?,?,3: TPM counter continues" newline bitfld.long 0x4 5. "DOZEEN,Doze Enable" "0: TPM counter continues,1: TPM counter pauses" tree.end tree "TPM6" base ad:0x42510000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x4 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x4 0.--7. 1. "CHAN,Channel Count" group.long 0x8++0x3 line.long 0x0 "GLOBAL,TPM Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x0 0. "NOUPDATE,No Update" "0: Internal double-buffered registers update as..,1: Internal double-buffered registers do not update" group.long 0x10++0xF line.long 0x0 "SC,Status and Control" bitfld.long 0x0 8. "DMA,DMA Enable" "0: Disable,1: Enable" eventfld.long 0x0 7. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" newline bitfld.long 0x0 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "CPWMS,Center-Aligned PWM Select" "0: Up counting mode,1: Up-down counting mode" newline bitfld.long 0x0 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter clock,2: TPM counter increments on the rising edge of..,3: TPM counter increments on the rising edge of the.." bitfld.long 0x0 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" line.long 0x4 "CNT,Counter" hexmask.long 0x4 0.--31. 1. "COUNT,Counter Value" line.long 0x8 "MOD,Modulo" hexmask.long 0x8 0.--31. 1. "MOD,Modulo Value" line.long 0xC "STATUS,Capture and Compare Status" eventfld.long 0xC 8. "TOF,Timer Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0xC 3. "CH3F,Channel 3 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 2. "CH2F,Channel 2 Flag" "0: Event not occurred,1: Event occurred" eventfld.long 0xC 1. "CH1F,Channel 1 Flag" "0: Event not occurred,1: Event occurred" newline eventfld.long 0xC 0. "CH0F,Channel 0 Flag" "0: Event not occurred,1: Event occurred" repeat 4. (list 0x0 0x1 0x2 0x3)(list ad:0x42510020 ad:0x42510028 ad:0x42510030 ad:0x42510038) tree "CHANNEL[$1]" base $2 group.long ($2)++0x7 line.long 0x0 "CSC,Channel n Status and Control" eventfld.long 0x0 7. "CHF,Channel Flag" "0: Event not occurred,1: Event occurred" bitfld.long 0x0 6. "CHIE,Channel Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x0 5. "MSB,Channel Mode Select B" "0,1" bitfld.long 0x0 4. "MSA,Channel Mode Select A" "0,1" bitfld.long 0x0 3. "ELSB,Edge or Level Select B" "0,1" bitfld.long 0x0 2. "ELSA,Edge or Level Select A" "0,1" bitfld.long 0x0 0. "DMA,DMA Enable" "0: Disable,1: Enable" line.long 0x4 "CV,Channel n Value" hexmask.long 0x4 0.--31. 1. "VAL,Channel Value" tree.end repeat.end base ad:0x42510000 group.long 0x64++0x3 line.long 0x0 "COMBINE,Combine Channel" bitfld.long 0x0 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 8. "COMBINE1,Combine Channels 2 and 3" "0: Independent,1: Combined" newline bitfld.long 0x0 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel,1: Odd channel" bitfld.long 0x0 0. "COMBINE0,Combine Channels 0 and 1" "0: Independent,1: Combined" group.long 0x6C++0x7 line.long 0x0 "TRIG,Channel Trigger" bitfld.long 0x0 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 3" bitfld.long 0x0 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 2" newline bitfld.long 0x0 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by channel 1" bitfld.long 0x0 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by channel 0" line.long 0x4 "POL,Channel Polarity" bitfld.long 0x4 3. "POL3,Channel 3 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 2. "POL2,Channel 2 Polarity" "0: Active high,1: Active low" newline bitfld.long 0x4 1. "POL1,Channel 1 Polarity" "0: Active high,1: Active low" bitfld.long 0x4 0. "POL0,Channel 0 Polarity" "0: Active high,1: Active low" group.long 0x78++0x3 line.long 0x0 "FILTER,Filter Control" hexmask.long.byte 0x0 12.--15. 1. "CH3FVAL,Channel 3 Filter Value" hexmask.long.byte 0x0 8.--11. 1. "CH2FVAL,Channel 2 Filter Value" newline hexmask.long.byte 0x0 4.--7. 1. "CH1FVAL,Channel 1 Filter Value" hexmask.long.byte 0x0 0.--3. 1. "CH0FVAL,Channel 0 Filter Value" group.long 0x80++0x7 line.long 0x0 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x0 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x0 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Decreasing (counter decrement),1: Increasing (counter increment)" newline rbitfld.long 0x0 1. "TOFDIR,Timer Overflow Direction" "0: Bottom of counting,1: Top of counting" bitfld.long 0x0 0. "QUADEN,Quadrature Decoder Enable" "0: Disable,1: Enable" line.long 0x4 "CONF,Configuration" bitfld.long 0x4 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or channel 1 pin input capture" bitfld.long 0x4 23. "TRGSRC,Trigger Source" "0: External,1: Internal (channel pin input capture)" newline bitfld.long 0x4 22. "TRGPOL,Trigger Polarity" "0: Active high,1: Active low" bitfld.long 0x4 19. "CPOT,Counter Pause on Trigger" "0: TPM counter continues,1: TPM counter pauses" newline bitfld.long 0x4 18. "CROT,Counter Reload on Trigger" "0: No reload,1: Reload" bitfld.long 0x4 17. "CSOO,Counter Stop on Overflow" "0: TPM counter continues,1: TPM counter stops" newline bitfld.long 0x4 16. "CSOT,Counter Start on Trigger" "0: Counter starts immediately,1: Counter starts after detection of a rising edge.." bitfld.long 0x4 9. "GTBEEN,GTB Enable" "0: Internally generated TPM counter,1: Externally generated GTB counter" newline bitfld.long 0x4 8. "GTBSYNC,GTB Synchronization" "0: Disable,1: Enable" bitfld.long 0x4 6.--7. "DBGMODE,Debug Mode" "0: TPM counter pauses,?,?,3: TPM counter continues" newline bitfld.long 0x4 5. "DOZEEN,Doze Enable" "0: TPM counter continues,1: TPM counter pauses" tree.end tree.end tree "WAKEUP_LPUART" tree "LPUART3" base ad:0x42570000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree "LPUART4" base ad:0x42580000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree "LPUART5" base ad:0x42590000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree "LPUART6" base ad:0x425A0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree "LPUART7" base ad:0x42690000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree "LPUART8" base ad:0x426A0000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Identification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x4 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x8++0x27 line.long 0x0 "GLOBAL,Global" bitfld.long 0x0 1. "RST,Software Reset" "0: Not reset,1: Reset" line.long 0x4 "PINCFG,Pin Configuration" bitfld.long 0x4 0.--1. "TRGSEL,Trigger Select" "0: Input trigger disabled,1: Input trigger used instead of the RXD pin input,2: Input trigger used instead of the CTS_B pin input,3: Input trigger used to modulate the TXD pin.." line.long 0x8 "BAUD,Baud Rate" bitfld.long 0x8 31. "MAEN1,Match Address Mode Enable 1" "0: Disables,1: Enables" bitfld.long 0x8 30. "MAEN2,Match Address Mode Enable 2" "0: Disables,1: Enables" newline bitfld.long 0x8 29. "M10,10-Bit Mode Select" "0: Receiver and transmitter use 7-bit to 9-bit data..,1: Receiver and transmitter use 10-bit data.." hexmask.long.byte 0x8 24.--28. 1. "OSR,Oversampling Ratio (OSR)" newline bitfld.long 0x8 23. "TDMAE,Transmitter DMA Enable" "0: Disables DMA request,1: Enables DMA request" bitfld.long 0x8 21. "RDMAE,Receiver Full DMA Enable" "0: Disables DMA request,1: Enables DMA request" newline bitfld.long 0x8 20. "RIDMAE,Receiver Idle DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x8 18.--19. "MATCFG,Match Configuration" "0: Address match wakeup,1: Idle match wakeup,2: Match on and match off,3: Enables RWU on data match and match on/off for.." newline bitfld.long 0x8 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising and.." bitfld.long 0x8 16. "RESYNCDIS,Resynchronization Disable" "0: Enables resynchronization,1: Disables resynchronization" newline bitfld.long 0x8 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Disables hardware interrupts from STAT[LBKDIF]..,1: Requests hardware interrupt when STAT[LBKDIF] is 1" bitfld.long 0x8 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Disables hardware interrupts from STAT[RXEDGIF],1: Requests hardware interrupts when STAT[RXEDGIF].." newline bitfld.long 0x8 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" hexmask.long.word 0x8 0.--12. 1. "SBR,Baud Rate Modulo Divisor" line.long 0xC "STAT,Status" eventfld.long 0xC 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: Not detected,1: Detected" eventfld.long 0xC 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: Not occurred,1: Occurred" newline bitfld.long 0xC 29. "MSBF,MSB First" "0: LSB,1: MSB" bitfld.long 0xC 28. "RXINV,Receive Data Inversion" "0: Inverted,1: Not inverted" newline bitfld.long 0xC 27. "RWUID,Receive Wake Up Idle Detect" "0: STAT[IDLE] does not become 1,1: STAT[IDLE] becomes 1" bitfld.long 0xC 26. "BRK13,Break Character Generation Length" "0: 9 to 13 bit times,1: 12 to 15 bit times" newline bitfld.long 0xC 25. "LBKDE,LIN Break Detection Enable" "0: Disables,1: Enables" rbitfld.long 0xC 24. "RAF,Receiver Active Flag" "0: Idle waiting for a start bit,1: Receiver active (RXD pin input not idle)" newline rbitfld.long 0xC 23. "TDRE,Transmit Data Register Empty Flag" "0: Greater than watermark,1: Equal to or less than watermark" rbitfld.long 0xC 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble or a..,1: Transmitter idle (transmission activity complete)" newline rbitfld.long 0xC 21. "RDRF,Receive Data Register Full Flag" "0: Equal to or less than watermark,1: Greater than watermark" eventfld.long 0xC 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line detected" newline eventfld.long 0xC 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0xC 18. "NF,Noise Flag (NF)" "0: No noise detected,1: Noise detected" newline eventfld.long 0xC 17. "FE,Framing Error Flag (FE)" "0: No framing error detected (this does not..,1: Framing error detected" eventfld.long 0xC 16. "PF,Parity Error Flag (PF)" "0: No parity error detected,1: Parity error detected" newline eventfld.long 0xC 15. "MA1F,Match 1 Flag" "0: Not equal to MA1,1: Equal to MA1" eventfld.long 0xC 14. "MA2F,Match 2 Flag" "0: Not equal to MA2,1: Equal to MA2" newline rbitfld.long 0xC 9. "TSF,Timeout Status Flag" "0: Field is 0,1: Field is 1" rbitfld.long 0xC 8. "MSF,MODEM Status Flag" "0: Field is 0,1: Field is 1" newline bitfld.long 0xC 1. "AME,Address Mark Enable" "0: Address mark in character is MSB,1: Address mark in character is the last bit before.." bitfld.long 0xC 0. "LBKFE,LIN Break Flag Enable" "0: Disables LIN break detect,1: Enables LIN break detect" line.long 0x10 "CTRL,Control" bitfld.long 0x10 31. "R8T9,Receive Bit 8 Transmit Bit 9" "0,1" bitfld.long 0x10 30. "R9T8,Receive Bit 9 Transmit Bit 8" "0,1" newline bitfld.long 0x10 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in Single-Wire mode,1: TXD pin is an output in Single-Wire mode" bitfld.long 0x10 28. "TXINV,Transmit Data Inversion" "0: Not inverted,1: Inverted" newline bitfld.long 0x10 27. "ORIE,Overrun Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 26. "NEIE,Noise Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 25. "FEIE,Framing Error Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 24. "PEIE,Parity Error Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 23. "TIE,Transmit Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 22. "TCIE,Transmission Complete Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 21. "RIE,Receiver Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 20. "ILIE,Idle Line Interrupt Enable" "0: Disables hardware interrupts from STAT[IDLE];..,1: Enables hardware interrupts when STAT[IDLE] = 1" newline bitfld.long 0x10 19. "TE,Transmitter Enable" "0: Disables,1: Enables" bitfld.long 0x10 18. "RE,Receiver Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for a wakeup.." bitfld.long 0x10 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x10 15. "MA1IE,Match 1 (MA1F) Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x10 14. "MA2IE,Match 2 (MA2F) Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x10 11. "M7,7-Bit Mode Select" "0: 8-bit to 10-bit data characters,1: 7-bit data characters" bitfld.long 0x10 8.--10. "IDLECFG,Idle Configuration" "0: 1,1: 2,2: 4,3: 8,4: 16,5: 32,6: 64,7: 128" newline bitfld.long 0x10 7. "LOOPS,Loop Mode Select" "0: Normal operation: RXD and TXD use separate pins,1: Loop mode or Single-Wire mode" bitfld.long 0x10 6. "DOZEEN,Enables LPUART in Doze mode." "0: Enables,1: Disables" newline bitfld.long 0x10 5. "RSRC,Receiver Source Select" "0: Internal Loopback mode,1: Single-wire mode" bitfld.long 0x10 4. "M,9-Bit Or 8-Bit Mode Select" "0: 8-bit data characters,1: 9-bit data characters" newline bitfld.long 0x10 3. "WAKE,Receiver Wakeup Method Select" "0: Configures CTRL[RWU] for idle-line wakeup,1: Configures CTRL[RWU] with address-mark wakeup" bitfld.long 0x10 2. "ILT,Idle Line Type Select" "0: After the start bit,1: After the stop bit" newline bitfld.long 0x10 1. "PE,Parity Enable" "0: Disables,1: Enables" bitfld.long 0x10 0. "PT,Parity Type" "0: Even parity,1: Odd parity" line.long 0x14 "DATA,Data" rbitfld.long 0x14 15. "NOISY,Noisy Data Received" "0: Received without noise,1: Received with noise" rbitfld.long 0x14 14. "PARITYE,Parity Error" "0: Received without a parity error,1: Received with a parity error" newline bitfld.long 0x14 13. "FRETSC,Frame Error Transmit Special Character" "0: Received without a frame error on reads or..,1: Received with a frame error on reads or.." rbitfld.long 0x14 12. "RXEMPT,Receive Buffer Empty" "0: Contains valid data,1: Contains invalid data and is empty" newline rbitfld.long 0x14 11. "IDLINE,Idle Line" "0: Received was not idle,1: Receiver was idle" rbitfld.long 0x14 10. "LINBRK,LIN Break" "0: LIN break not detected or LIN break detect..,1: LIN break detected" newline bitfld.long 0x14 9. "R9T9,Read Receive FIFO Bit 9 Or Write Transmit FIFO Bit 9" "0,1" bitfld.long 0x14 8. "R8T8,Read Receive FIFO Bit 8 Or Write Transmit FIFO Bit 8" "0,1" newline bitfld.long 0x14 7. "R7T7,Read Receive FIFO Bit 7 Or Write Transmit FIFO Bit 7" "0,1" bitfld.long 0x14 6. "R6T6,Read Receive FIFO Bit 6 Or Write Transmit FIFO Bit 6" "0,1" newline bitfld.long 0x14 5. "R5T5,Read Receive FIFO Bit 5 Or Write Transmit FIFO Bit 5" "0,1" bitfld.long 0x14 4. "R4T4,Read Receive FIFO Bit 4 Or Write Transmit FIFO Bit 4" "0,1" newline bitfld.long 0x14 3. "R3T3,Read Receive FIFO Bit 3 Or Write Transmit FIFO Bit 3" "0,1" bitfld.long 0x14 2. "R2T2,Read Receive FIFO Bit 2 Or Write Transmit FIFO Bit 2" "0,1" newline bitfld.long 0x14 1. "R1T1,Read Receive FIFO Bit 1 Or Write Transmit FIFO Bit 1" "0,1" bitfld.long 0x14 0. "R0T0,Read Receive FIFO Bit 0 Or Write Transmit FIFO Bit 0" "0,1" line.long 0x18 "MATCH,Match Address" hexmask.long.word 0x18 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x18 0.--9. 1. "MA1,Match Address 1" line.long 0x1C "MODIR,MODEM IrDA" bitfld.long 0x1C 18. "IREN,IR Enable" "0: Disables,1: Enables" bitfld.long 0x1C 16.--17. "TNP,Transmitter Narrow Pulse" "0: 1 / OSR,1: 2 / OSR,2: 3 / OSR,3: 4 / OSR" newline hexmask.long.byte 0x1C 8.--11. 1. "RTSWATER,Receive RTS Configuration" bitfld.long 0x1C 5. "TXCTSSRC,Transmit CTS Source" "0: The CTS_B pin,1: An internal connection to the receiver address.." newline bitfld.long 0x1C 4. "TXCTSC,Transmit CTS Configuration" "0: Sampled at the start of each character,1: Sampled when the transmitter is idle" bitfld.long 0x1C 3. "RXRTSE,Receiver RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 2. "TXRTSPOL,Transmitter RTS Polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x1C 1. "TXRTSE,Transmitter RTS Enable" "0: Disables,1: Enables" newline bitfld.long 0x1C 0. "TXCTSE,Transmitter CTS Enable" "0: Disables,1: Enables" line.long 0x20 "FIFO,FIFO" rbitfld.long 0x20 23. "TXEMPT,Transmit FIFO Or Buffer Empty" "0: Not empty,1: Empty" rbitfld.long 0x20 22. "RXEMPT,Receive FIFO Or Buffer Empty" "0: Not empty,1: Empty" newline eventfld.long 0x20 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No overflow,1: Overflow" eventfld.long 0x20 16. "RXUF,Receiver FIFO Underflow Flag" "0: No underflow,1: Underflow" newline bitfld.long 0x20 15. "TXFLUSH,Transmit FIFO Flush" "0: No effect,1: All data is flushed out" bitfld.long 0x20 14. "RXFLUSH,Receive FIFO Flush" "0: No effect,1: All data is flushed out" newline bitfld.long 0x20 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disables STAT[RDRF] to become 1 because of..,1: Enables STAT[RDRF] to become 1 because of..,2: Enables STAT[RDRF] to become 1 because of..,3: Enables STAT[RDRF] to become 1 because of..,4: Enables STAT[RDRF] to become 1 because of..,5: Enables STAT[RDRF] to become 1 because of..,6: Enables STAT[RDRF] to become 1 because of..,7: Enables STAT[RDRF] to become 1 because of.." bitfld.long 0x20 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: Disables,1: Enables" newline bitfld.long 0x20 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: Disables,1: Enables" bitfld.long 0x20 7. "TXFE,Transmit FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[TXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO buffer depth = 1 dataword,1: Transmit FIFO buffer depth = 4 datawords,2: Transmit FIFO buffer depth = 8 datawords,3: Transmit FIFO buffer depth = 16 datawords,4: Transmit FIFO buffer depth = 32 datawords,5: Transmit FIFO buffer depth = 64 datawords,6: Transmit FIFO buffer depth = 128 datawords,7: Transmit FIFO buffer depth = 256 datawords" bitfld.long 0x20 3. "RXFE,Receive FIFO Enable" "0: Disables; buffer depth is 1,1: Enables; FIFO[RXFIFOSIZE] indicates the buffer.." newline rbitfld.long 0x20 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO buffer depth = 1 dataword,1: Receive FIFO buffer depth = 4 datawords,2: Receive FIFO buffer depth = 8 datawords,3: Receive FIFO buffer depth = 16 datawords,4: Receive FIFO buffer depth = 32 datawords,5: Receive FIFO buffer depth = 64 datawords,6: Receive FIFO buffer depth = 128 datawords,7: Receive FIFO buffer depth = 256 datawords" line.long 0x24 "WATER,Watermark" hexmask.long.byte 0x24 24.--28. 1. "RXCOUNT,Receive Counter" hexmask.long.byte 0x24 16.--19. 1. "RXWATER,Receive Watermark" newline hexmask.long.byte 0x24 8.--12. 1. "TXCOUNT,Transmit Counter" hexmask.long.byte 0x24 0.--3. 1. "TXWATER,Transmit Watermark" rgroup.long 0x30++0x3 line.long 0x0 "DATARO,Data Read-Only" hexmask.long.word 0x0 0.--15. 1. "DATA,Receive Data" group.long 0x40++0x13 line.long 0x0 "MCR,MODEM Control" bitfld.long 0x0 9. "RTS,Request To Send" "0: Default state is logic one,1: Default state is logic zero" bitfld.long 0x0 8. "DTR,Data Terminal Ready" "0: Default state is logic one,1: Default state is logic zero" newline bitfld.long 0x0 3. "DCD,Data Carrier Detect" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 2. "RIN,Ring Indicator" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x0 1. "DSR,Data Set Ready" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x0 0. "CTS,Clear To Send" "0: Interrupt disabled,1: Interrupt enabled" line.long 0x4 "MSR,MODEM Status" rbitfld.long 0x4 7. "DCD,Data Carrier Detect" "0: The DCD_B pin is logic one,1: The DCD_B pin is logic zero" rbitfld.long 0x4 6. "RIN,Ring Indicator" "0: The RIN_B pin is logic one,1: The RIN_B pin is logic zero" newline rbitfld.long 0x4 5. "DSR,Data Set Ready" "0: The DSR_B pin is logic one,1: The DSR_B pin is logic zero" rbitfld.long 0x4 4. "CTS,Clear To Send" "0: The CTS_B pin is logic one,1: The CTS_B pin is logic zero" newline eventfld.long 0x4 3. "DDCD,Delta Data Carrier Detect" "0: Did not change state,1: Changed state" eventfld.long 0x4 2. "DRI,Delta Ring Indicator" "0: Did not change state,1: Changed state" newline eventfld.long 0x4 1. "DDSR,Delta Data Set Ready" "0: Did not change state,1: Changed state" eventfld.long 0x4 0. "DCTS,Delta Clear To Send" "0: Did not change state,1: Changed state" line.long 0x8 "REIR,Receiver Extended Idle" hexmask.long.word 0x8 0.--13. 1. "IDTIME,Idle Time" line.long 0xC "TEIR,Transmitter Extended Idle" hexmask.long.word 0xC 0.--13. 1. "IDTIME,Idle Time" line.long 0x10 "HDCR,Half Duplex Control" hexmask.long.byte 0x10 8.--15. 1. "RTSEXT,RTS Extended" bitfld.long 0x10 3. "RXMSK,Receive Mask" "0: Does not mask,1: Masks" newline bitfld.long 0x10 2. "RXWRMSK,Receive FIFO Write Mask" "0: Does not mask,1: Masks" bitfld.long 0x10 1. "RXSEL,Receive Select" "0: RXD,1: TXD" newline bitfld.long 0x10 0. "TXSTALL,Transmit Stall" "0: No effect,1: Does not become busy" group.long 0x58++0x7 line.long 0x0 "TOCR,Timeout Control" hexmask.long.byte 0x0 8.--11. 1. "TOIE,Timeout Interrupt Enable" hexmask.long.byte 0x0 0.--3. 1. "TOEN,Timeout Enable" line.long 0x4 "TOSR,Timeout Status" hexmask.long.byte 0x4 8.--11. 1. "TOF,Timeout Flag" hexmask.long.byte 0x4 0.--3. 1. "TOZ,Timeout Zero" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x60)++0x3 line.long 0x0 "TIMEOUT[$1],Timeout N" bitfld.long 0x0 30.--31. "CFG,Idle Configuration" "0: Becomes 1 after timeout characters are received,1: Becomes 1 when idle for timeout bit clocks,2: Becomes 1 when idle for timeout bit clocks..,3: Becomes 1 when idle for at least timeout bit.." hexmask.long.word 0x0 0.--13. 1. "TIMEOUT,Timeout Value" repeat.end repeat 128. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x200)++0x3 line.long 0x0 "TCBR[$1],Transmit Command Burst" hexmask.long.word 0x0 0.--15. 1. "DATA,Data" repeat.end repeat 256. (increment 0x0 0x1)(increment 0x0 0x4) wgroup.long ($2+0x400)++0x3 line.long 0x0 "TDBR[$1],Transmit Data Burst" hexmask.long.byte 0x0 24.--31. 1. "DATA3,Data3" hexmask.long.byte 0x0 16.--23. 1. "DATA2,Data2" newline hexmask.long.byte 0x0 8.--15. 1. "DATA1,Data1" hexmask.long.byte 0x0 0.--7. 1. "DATA0,Data0" repeat.end tree.end tree.end tree "WAKEUP_LPWDOG" tree "WDOG3" base ad:0x42490000 group.long 0x0++0xF line.long 0x0 "CS,WDOG Control and Status" bitfld.long 0x0 15. "WIN,WDOG Window" "0: Disable,1: Enable" eventfld.long 0x0 14. "FLG,WDOG Interrupt Flag" "0: No interrupt occurred,1: An interrupt occurred" bitfld.long 0x0 13. "CMD32EN,Command 32 Enable" "0: Disable,1: Enable" bitfld.long 0x0 12. "PRES,WDOG Prescaler" "0: Disable,1: Enable" newline rbitfld.long 0x0 11. "ULK,Unlock Status" "0: Locked,1: Unlocked" rbitfld.long 0x0 10. "RCS,Reconfiguration Success" "0: Unsuccessful,1: Successful" bitfld.long 0x0 8.--9. "CLK,WDOG Clock" "0,1,2,3" bitfld.long 0x0 7. "EN,WDOG Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 6. "INT,WDOG Interrupt" "0: Disable,1: Enable" bitfld.long 0x0 5. "UPDATE,Updates Allowed" "0: Updates not allowed,1: Updates allowed" bitfld.long 0x0 3.--4. "TST,WDOG Test" "0: Disable WDOG Test mode,1: Enable WDOG User mode,2: Enable WDOG Test mode,3: Enable WDOG Test mode" bitfld.long 0x0 2. "DBG,Debug Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "WAIT,Wait Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "STOP,Stop Enable" "0: Disable,1: Enable" line.long 0x4 "CNT,WDOG Counter" hexmask.long.byte 0x4 8.--15. 1. "CNTHIGH,Counter Low Byte" hexmask.long.byte 0x4 0.--7. 1. "CNTLOW,Counter High Byte" line.long 0x8 "TOVAL,WDOG Timeout Value" hexmask.long.byte 0x8 8.--15. 1. "TOVALHIGH,Timeout Value High" hexmask.long.byte 0x8 0.--7. 1. "TOVALLOW,Timeout Value Low" line.long 0xC "WIN,Watchdog Window" hexmask.long.byte 0xC 8.--15. 1. "WINHIGH,High Byte" hexmask.long.byte 0xC 0.--7. 1. "WINLOW,Low Byte" tree.end tree "WDOG4" base ad:0x424A0000 group.long 0x0++0xF line.long 0x0 "CS,WDOG Control and Status" bitfld.long 0x0 15. "WIN,WDOG Window" "0: Disable,1: Enable" eventfld.long 0x0 14. "FLG,WDOG Interrupt Flag" "0: No interrupt occurred,1: An interrupt occurred" bitfld.long 0x0 13. "CMD32EN,Command 32 Enable" "0: Disable,1: Enable" bitfld.long 0x0 12. "PRES,WDOG Prescaler" "0: Disable,1: Enable" newline rbitfld.long 0x0 11. "ULK,Unlock Status" "0: Locked,1: Unlocked" rbitfld.long 0x0 10. "RCS,Reconfiguration Success" "0: Unsuccessful,1: Successful" bitfld.long 0x0 8.--9. "CLK,WDOG Clock" "0,1,2,3" bitfld.long 0x0 7. "EN,WDOG Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 6. "INT,WDOG Interrupt" "0: Disable,1: Enable" bitfld.long 0x0 5. "UPDATE,Updates Allowed" "0: Updates not allowed,1: Updates allowed" bitfld.long 0x0 3.--4. "TST,WDOG Test" "0: Disable WDOG Test mode,1: Enable WDOG User mode,2: Enable WDOG Test mode,3: Enable WDOG Test mode" bitfld.long 0x0 2. "DBG,Debug Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "WAIT,Wait Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "STOP,Stop Enable" "0: Disable,1: Enable" line.long 0x4 "CNT,WDOG Counter" hexmask.long.byte 0x4 8.--15. 1. "CNTHIGH,Counter Low Byte" hexmask.long.byte 0x4 0.--7. 1. "CNTLOW,Counter High Byte" line.long 0x8 "TOVAL,WDOG Timeout Value" hexmask.long.byte 0x8 8.--15. 1. "TOVALHIGH,Timeout Value High" hexmask.long.byte 0x8 0.--7. 1. "TOVALLOW,Timeout Value Low" line.long 0xC "WIN,Watchdog Window" hexmask.long.byte 0xC 8.--15. 1. "WINHIGH,High Byte" hexmask.long.byte 0xC 0.--7. 1. "WINLOW,Low Byte" tree.end tree "WDOG5" base ad:0x424B0000 group.long 0x0++0xF line.long 0x0 "CS,WDOG Control and Status" bitfld.long 0x0 15. "WIN,WDOG Window" "0: Disable,1: Enable" eventfld.long 0x0 14. "FLG,WDOG Interrupt Flag" "0: No interrupt occurred,1: An interrupt occurred" bitfld.long 0x0 13. "CMD32EN,Command 32 Enable" "0: Disable,1: Enable" bitfld.long 0x0 12. "PRES,WDOG Prescaler" "0: Disable,1: Enable" newline rbitfld.long 0x0 11. "ULK,Unlock Status" "0: Locked,1: Unlocked" rbitfld.long 0x0 10. "RCS,Reconfiguration Success" "0: Unsuccessful,1: Successful" bitfld.long 0x0 8.--9. "CLK,WDOG Clock" "0,1,2,3" bitfld.long 0x0 7. "EN,WDOG Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 6. "INT,WDOG Interrupt" "0: Disable,1: Enable" bitfld.long 0x0 5. "UPDATE,Updates Allowed" "0: Updates not allowed,1: Updates allowed" bitfld.long 0x0 3.--4. "TST,WDOG Test" "0: Disable WDOG Test mode,1: Enable WDOG User mode,2: Enable WDOG Test mode,3: Enable WDOG Test mode" bitfld.long 0x0 2. "DBG,Debug Enable" "0: Disable,1: Enable" newline bitfld.long 0x0 1. "WAIT,Wait Enable" "0: Disable,1: Enable" bitfld.long 0x0 0. "STOP,Stop Enable" "0: Disable,1: Enable" line.long 0x4 "CNT,WDOG Counter" hexmask.long.byte 0x4 8.--15. 1. "CNTHIGH,Counter Low Byte" hexmask.long.byte 0x4 0.--7. 1. "CNTLOW,Counter High Byte" line.long 0x8 "TOVAL,WDOG Timeout Value" hexmask.long.byte 0x8 8.--15. 1. "TOVALHIGH,Timeout Value High" hexmask.long.byte 0x8 0.--7. 1. "TOVALLOW,Timeout Value Low" line.long 0xC "WIN,Watchdog Window" hexmask.long.byte 0xC 8.--15. 1. "WINHIGH,High Byte" hexmask.long.byte 0xC 0.--7. 1. "WINLOW,Low Byte" tree.end tree.end tree "WAKEUP_RGPIO" tree "GPIO2" base ad:0x43810000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 0.--3. 1. "IRQNUM,Interrupt Number" group.long 0xC++0x13 line.long 0x0 "LOCK,Lock" bitfld.long 0x0 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x0 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x0 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x0 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." line.long 0x4 "PCNS,Pin Control Non-Secure" bitfld.long 0x4 31. "NSE31,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 30. "NSE30,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 29. "NSE29,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 28. "NSE28,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 27. "NSE27,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 26. "NSE26,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 25. "NSE25,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 24. "NSE24,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 23. "NSE23,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 22. "NSE22,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 21. "NSE21,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 20. "NSE20,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 19. "NSE19,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 18. "NSE18,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 17. "NSE17,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 16. "NSE16,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 15. "NSE15,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 14. "NSE14,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 13. "NSE13,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 12. "NSE12,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 11. "NSE11,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 10. "NSE10,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 9. "NSE9,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 8. "NSE8,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 7. "NSE7,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 6. "NSE6,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 5. "NSE5,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 4. "NSE4,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 3. "NSE3,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 2. "NSE2,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 1. "NSE1,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 0. "NSE0,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." line.long 0x8 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x8 1. "NSE1,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." bitfld.long 0x8 0. "NSE0,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." line.long 0xC "PCNP,Pin Control Non-Privilege" bitfld.long 0xC 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." line.long 0x10 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x10 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." bitfld.long 0x10 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." group.long 0x40++0xF line.long 0x0 "PDOR,Port Data Output Register" bitfld.long 0x0 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." line.long 0x4 "PSOR,Port Set Output Register" bitfld.long 0x4 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." line.long 0x8 "PCOR,Port Clear Output Register" bitfld.long 0x8 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." line.long 0xC "PTOR,Port Toggle Output Register" bitfld.long 0xC 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." rgroup.long 0x50++0x3 line.long 0x0 "PDIR,Port Data Input Register" bitfld.long 0x0 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." group.long 0x54++0x7 line.long 0x0 "PDDR,Port Data Direction Register" bitfld.long 0x0 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." line.long 0x4 "PIDR,Port Input Disable Register" bitfld.long 0x4 31. "PID31,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 30. "PID30,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 29. "PID29,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 28. "PID28,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 27. "PID27,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 26. "PID26,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 25. "PID25,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 24. "PID24,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 23. "PID23,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 22. "PID22,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 21. "PID21,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 20. "PID20,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 19. "PID19,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 18. "PID18,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 17. "PID17,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 16. "PID16,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 15. "PID15,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 14. "PID14,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 13. "PID13,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 12. "PID12,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 11. "PID11,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 10. "PID10,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 9. "PID9,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 8. "PID8,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 7. "PID7,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 6. "PID6,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 5. "PID5,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 4. "PID4,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 3. "PID3,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 2. "PID2,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 1. "PID1,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 0. "PID0,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." repeat 32. (increment 0x0 0x1)(increment 0x0 0x1) group.byte ($2+0x60)++0x0 line.byte 0x0 "PDR[$1],Pin Data Register a" bitfld.byte 0x0 0. "PD,Pin Data (input and output)" "0: Pin logic level is logic zero or not configured..,1: Pin logic level is logic one." repeat.end group.long 0x80++0x87 line.long 0x0 "ICR0,Interrupt Control Register 0" eventfld.long 0x0 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x0 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x0 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x0 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4 "ICR1,Interrupt Control Register 1" eventfld.long 0x4 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x8 "ICR2,Interrupt Control Register 2" eventfld.long 0x8 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x8 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x8 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x8 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0xC "ICR3,Interrupt Control Register 3" eventfld.long 0xC 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0xC 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0xC 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0xC 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x10 "ICR4,Interrupt Control Register 4" eventfld.long 0x10 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x10 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x10 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x10 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x14 "ICR5,Interrupt Control Register 5" eventfld.long 0x14 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x14 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x14 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x14 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x18 "ICR6,Interrupt Control Register 6" eventfld.long 0x18 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x18 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x18 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x18 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x1C "ICR7,Interrupt Control Register 7" eventfld.long 0x1C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x1C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x1C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x1C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x20 "ICR8,Interrupt Control Register 8" eventfld.long 0x20 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x20 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x20 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x20 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x24 "ICR9,Interrupt Control Register 9" eventfld.long 0x24 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x24 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x24 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x24 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x28 "ICR10,Interrupt Control Register 10" eventfld.long 0x28 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x28 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x28 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x28 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x2C "ICR11,Interrupt Control Register 11" eventfld.long 0x2C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x2C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x2C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x2C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x30 "ICR12,Interrupt Control Register 12" eventfld.long 0x30 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x30 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x30 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x30 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x34 "ICR13,Interrupt Control Register 13" eventfld.long 0x34 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x34 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x34 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x34 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x38 "ICR14,Interrupt Control Register 14" eventfld.long 0x38 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x38 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x38 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x38 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x3C "ICR15,Interrupt Control Register 15" eventfld.long 0x3C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x3C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x3C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x3C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x40 "ICR16,Interrupt Control Register 16" eventfld.long 0x40 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x40 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x40 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x40 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x44 "ICR17,Interrupt Control Register 17" eventfld.long 0x44 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x44 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x44 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x44 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x48 "ICR18,Interrupt Control Register 18" eventfld.long 0x48 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x48 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x48 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x48 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4C "ICR19,Interrupt Control Register 19" eventfld.long 0x4C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x50 "ICR20,Interrupt Control Register 20" eventfld.long 0x50 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x50 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x50 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x50 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x54 "ICR21,Interrupt Control Register 21" eventfld.long 0x54 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x54 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x54 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x54 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x58 "ICR22,Interrupt Control Register 22" eventfld.long 0x58 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x58 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x58 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x58 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x5C "ICR23,Interrupt Control Register 23" eventfld.long 0x5C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x5C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x5C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x5C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x60 "ICR24,Interrupt Control Register 24" eventfld.long 0x60 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x60 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x60 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x60 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x64 "ICR25,Interrupt Control Register 25" eventfld.long 0x64 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x64 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x64 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x64 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x68 "ICR26,Interrupt Control Register 26" eventfld.long 0x68 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x68 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x68 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x68 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x6C "ICR27,Interrupt Control Register 27" eventfld.long 0x6C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x6C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x6C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x6C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x70 "ICR28,Interrupt Control Register 28" eventfld.long 0x70 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x70 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x70 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x70 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x74 "ICR29,Interrupt Control Register 29" eventfld.long 0x74 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x74 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x74 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x74 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x78 "ICR30,Interrupt Control Register 30" eventfld.long 0x78 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x78 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x78 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x78 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x7C "ICR31,Interrupt Control Register 31" eventfld.long 0x7C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x7C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x7C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x7C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x80 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x80 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x80 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." line.long 0x84 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x84 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x84 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x120)++0x3 line.long 0x0 "ISFR[$1],Interrupt Status Flag Register" eventfld.long 0x0 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." repeat.end tree.end tree "GPIO3" base ad:0x43820000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 0.--3. 1. "IRQNUM,Interrupt Number" group.long 0xC++0x13 line.long 0x0 "LOCK,Lock" bitfld.long 0x0 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x0 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x0 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x0 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." line.long 0x4 "PCNS,Pin Control Non-Secure" bitfld.long 0x4 31. "NSE31,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 30. "NSE30,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 29. "NSE29,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 28. "NSE28,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 27. "NSE27,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 26. "NSE26,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 25. "NSE25,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 24. "NSE24,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 23. "NSE23,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 22. "NSE22,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 21. "NSE21,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 20. "NSE20,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 19. "NSE19,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 18. "NSE18,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 17. "NSE17,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 16. "NSE16,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 15. "NSE15,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 14. "NSE14,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 13. "NSE13,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 12. "NSE12,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 11. "NSE11,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 10. "NSE10,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 9. "NSE9,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 8. "NSE8,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 7. "NSE7,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 6. "NSE6,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 5. "NSE5,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 4. "NSE4,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 3. "NSE3,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 2. "NSE2,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 1. "NSE1,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 0. "NSE0,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." line.long 0x8 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x8 1. "NSE1,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." bitfld.long 0x8 0. "NSE0,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." line.long 0xC "PCNP,Pin Control Non-Privilege" bitfld.long 0xC 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." line.long 0x10 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x10 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." bitfld.long 0x10 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." group.long 0x40++0xF line.long 0x0 "PDOR,Port Data Output Register" bitfld.long 0x0 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." line.long 0x4 "PSOR,Port Set Output Register" bitfld.long 0x4 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." line.long 0x8 "PCOR,Port Clear Output Register" bitfld.long 0x8 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." line.long 0xC "PTOR,Port Toggle Output Register" bitfld.long 0xC 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." rgroup.long 0x50++0x3 line.long 0x0 "PDIR,Port Data Input Register" bitfld.long 0x0 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." group.long 0x54++0x7 line.long 0x0 "PDDR,Port Data Direction Register" bitfld.long 0x0 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." line.long 0x4 "PIDR,Port Input Disable Register" bitfld.long 0x4 31. "PID31,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 30. "PID30,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 29. "PID29,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 28. "PID28,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 27. "PID27,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 26. "PID26,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 25. "PID25,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 24. "PID24,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 23. "PID23,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 22. "PID22,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 21. "PID21,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 20. "PID20,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 19. "PID19,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 18. "PID18,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 17. "PID17,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 16. "PID16,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 15. "PID15,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 14. "PID14,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 13. "PID13,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 12. "PID12,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 11. "PID11,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 10. "PID10,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 9. "PID9,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 8. "PID8,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 7. "PID7,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 6. "PID6,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 5. "PID5,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 4. "PID4,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 3. "PID3,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 2. "PID2,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 1. "PID1,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 0. "PID0,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." repeat 32. (increment 0x0 0x1)(increment 0x0 0x1) group.byte ($2+0x60)++0x0 line.byte 0x0 "PDR[$1],Pin Data Register a" bitfld.byte 0x0 0. "PD,Pin Data (input and output)" "0: Pin logic level is logic zero or not configured..,1: Pin logic level is logic one." repeat.end group.long 0x80++0x87 line.long 0x0 "ICR0,Interrupt Control Register 0" eventfld.long 0x0 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x0 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x0 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x0 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4 "ICR1,Interrupt Control Register 1" eventfld.long 0x4 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x8 "ICR2,Interrupt Control Register 2" eventfld.long 0x8 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x8 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x8 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x8 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0xC "ICR3,Interrupt Control Register 3" eventfld.long 0xC 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0xC 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0xC 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0xC 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x10 "ICR4,Interrupt Control Register 4" eventfld.long 0x10 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x10 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x10 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x10 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x14 "ICR5,Interrupt Control Register 5" eventfld.long 0x14 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x14 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x14 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x14 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x18 "ICR6,Interrupt Control Register 6" eventfld.long 0x18 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x18 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x18 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x18 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x1C "ICR7,Interrupt Control Register 7" eventfld.long 0x1C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x1C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x1C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x1C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x20 "ICR8,Interrupt Control Register 8" eventfld.long 0x20 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x20 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x20 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x20 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x24 "ICR9,Interrupt Control Register 9" eventfld.long 0x24 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x24 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x24 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x24 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x28 "ICR10,Interrupt Control Register 10" eventfld.long 0x28 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x28 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x28 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x28 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x2C "ICR11,Interrupt Control Register 11" eventfld.long 0x2C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x2C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x2C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x2C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x30 "ICR12,Interrupt Control Register 12" eventfld.long 0x30 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x30 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x30 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x30 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x34 "ICR13,Interrupt Control Register 13" eventfld.long 0x34 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x34 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x34 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x34 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x38 "ICR14,Interrupt Control Register 14" eventfld.long 0x38 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x38 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x38 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x38 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x3C "ICR15,Interrupt Control Register 15" eventfld.long 0x3C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x3C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x3C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x3C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x40 "ICR16,Interrupt Control Register 16" eventfld.long 0x40 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x40 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x40 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x40 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x44 "ICR17,Interrupt Control Register 17" eventfld.long 0x44 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x44 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x44 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x44 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x48 "ICR18,Interrupt Control Register 18" eventfld.long 0x48 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x48 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x48 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x48 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4C "ICR19,Interrupt Control Register 19" eventfld.long 0x4C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x50 "ICR20,Interrupt Control Register 20" eventfld.long 0x50 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x50 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x50 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x50 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x54 "ICR21,Interrupt Control Register 21" eventfld.long 0x54 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x54 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x54 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x54 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x58 "ICR22,Interrupt Control Register 22" eventfld.long 0x58 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x58 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x58 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x58 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x5C "ICR23,Interrupt Control Register 23" eventfld.long 0x5C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x5C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x5C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x5C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x60 "ICR24,Interrupt Control Register 24" eventfld.long 0x60 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x60 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x60 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x60 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x64 "ICR25,Interrupt Control Register 25" eventfld.long 0x64 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x64 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x64 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x64 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x68 "ICR26,Interrupt Control Register 26" eventfld.long 0x68 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x68 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x68 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x68 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x6C "ICR27,Interrupt Control Register 27" eventfld.long 0x6C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x6C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x6C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x6C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x70 "ICR28,Interrupt Control Register 28" eventfld.long 0x70 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x70 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x70 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x70 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x74 "ICR29,Interrupt Control Register 29" eventfld.long 0x74 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x74 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x74 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x74 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x78 "ICR30,Interrupt Control Register 30" eventfld.long 0x78 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x78 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x78 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x78 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x7C "ICR31,Interrupt Control Register 31" eventfld.long 0x7C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x7C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x7C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x7C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x80 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x80 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x80 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." line.long 0x84 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x84 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x84 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x120)++0x3 line.long 0x0 "ISFR[$1],Interrupt Status Flag Register" eventfld.long 0x0 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." repeat.end tree.end tree "GPIO4" base ad:0x43830000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 0.--3. 1. "IRQNUM,Interrupt Number" group.long 0xC++0x13 line.long 0x0 "LOCK,Lock" bitfld.long 0x0 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x0 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x0 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x0 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." line.long 0x4 "PCNS,Pin Control Non-Secure" bitfld.long 0x4 31. "NSE31,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 30. "NSE30,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 29. "NSE29,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 28. "NSE28,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 27. "NSE27,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 26. "NSE26,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 25. "NSE25,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 24. "NSE24,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 23. "NSE23,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 22. "NSE22,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 21. "NSE21,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 20. "NSE20,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 19. "NSE19,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 18. "NSE18,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 17. "NSE17,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 16. "NSE16,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 15. "NSE15,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 14. "NSE14,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 13. "NSE13,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 12. "NSE12,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 11. "NSE11,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 10. "NSE10,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 9. "NSE9,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 8. "NSE8,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 7. "NSE7,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 6. "NSE6,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 5. "NSE5,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 4. "NSE4,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 3. "NSE3,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 2. "NSE2,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 1. "NSE1,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 0. "NSE0,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." line.long 0x8 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x8 1. "NSE1,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." bitfld.long 0x8 0. "NSE0,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." line.long 0xC "PCNP,Pin Control Non-Privilege" bitfld.long 0xC 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." line.long 0x10 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x10 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." bitfld.long 0x10 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." group.long 0x40++0xF line.long 0x0 "PDOR,Port Data Output Register" bitfld.long 0x0 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." line.long 0x4 "PSOR,Port Set Output Register" bitfld.long 0x4 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." line.long 0x8 "PCOR,Port Clear Output Register" bitfld.long 0x8 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." line.long 0xC "PTOR,Port Toggle Output Register" bitfld.long 0xC 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." rgroup.long 0x50++0x3 line.long 0x0 "PDIR,Port Data Input Register" bitfld.long 0x0 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." group.long 0x54++0x7 line.long 0x0 "PDDR,Port Data Direction Register" bitfld.long 0x0 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." line.long 0x4 "PIDR,Port Input Disable Register" bitfld.long 0x4 31. "PID31,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 30. "PID30,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 29. "PID29,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 28. "PID28,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 27. "PID27,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 26. "PID26,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 25. "PID25,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 24. "PID24,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 23. "PID23,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 22. "PID22,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 21. "PID21,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 20. "PID20,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 19. "PID19,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 18. "PID18,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 17. "PID17,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 16. "PID16,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 15. "PID15,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 14. "PID14,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 13. "PID13,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 12. "PID12,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 11. "PID11,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 10. "PID10,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 9. "PID9,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 8. "PID8,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 7. "PID7,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 6. "PID6,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 5. "PID5,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 4. "PID4,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 3. "PID3,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 2. "PID2,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 1. "PID1,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 0. "PID0,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." repeat 32. (increment 0x0 0x1)(increment 0x0 0x1) group.byte ($2+0x60)++0x0 line.byte 0x0 "PDR[$1],Pin Data Register a" bitfld.byte 0x0 0. "PD,Pin Data (input and output)" "0: Pin logic level is logic zero or not configured..,1: Pin logic level is logic one." repeat.end group.long 0x80++0x87 line.long 0x0 "ICR0,Interrupt Control Register 0" eventfld.long 0x0 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x0 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x0 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x0 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4 "ICR1,Interrupt Control Register 1" eventfld.long 0x4 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x8 "ICR2,Interrupt Control Register 2" eventfld.long 0x8 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x8 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x8 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x8 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0xC "ICR3,Interrupt Control Register 3" eventfld.long 0xC 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0xC 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0xC 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0xC 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x10 "ICR4,Interrupt Control Register 4" eventfld.long 0x10 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x10 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x10 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x10 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x14 "ICR5,Interrupt Control Register 5" eventfld.long 0x14 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x14 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x14 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x14 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x18 "ICR6,Interrupt Control Register 6" eventfld.long 0x18 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x18 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x18 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x18 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x1C "ICR7,Interrupt Control Register 7" eventfld.long 0x1C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x1C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x1C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x1C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x20 "ICR8,Interrupt Control Register 8" eventfld.long 0x20 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x20 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x20 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x20 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x24 "ICR9,Interrupt Control Register 9" eventfld.long 0x24 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x24 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x24 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x24 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x28 "ICR10,Interrupt Control Register 10" eventfld.long 0x28 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x28 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x28 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x28 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x2C "ICR11,Interrupt Control Register 11" eventfld.long 0x2C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x2C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x2C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x2C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x30 "ICR12,Interrupt Control Register 12" eventfld.long 0x30 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x30 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x30 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x30 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x34 "ICR13,Interrupt Control Register 13" eventfld.long 0x34 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x34 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x34 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x34 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x38 "ICR14,Interrupt Control Register 14" eventfld.long 0x38 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x38 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x38 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x38 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x3C "ICR15,Interrupt Control Register 15" eventfld.long 0x3C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x3C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x3C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x3C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x40 "ICR16,Interrupt Control Register 16" eventfld.long 0x40 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x40 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x40 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x40 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x44 "ICR17,Interrupt Control Register 17" eventfld.long 0x44 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x44 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x44 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x44 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x48 "ICR18,Interrupt Control Register 18" eventfld.long 0x48 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x48 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x48 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x48 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4C "ICR19,Interrupt Control Register 19" eventfld.long 0x4C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x50 "ICR20,Interrupt Control Register 20" eventfld.long 0x50 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x50 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x50 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x50 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x54 "ICR21,Interrupt Control Register 21" eventfld.long 0x54 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x54 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x54 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x54 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x58 "ICR22,Interrupt Control Register 22" eventfld.long 0x58 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x58 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x58 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x58 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x5C "ICR23,Interrupt Control Register 23" eventfld.long 0x5C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x5C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x5C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x5C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x60 "ICR24,Interrupt Control Register 24" eventfld.long 0x60 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x60 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x60 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x60 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x64 "ICR25,Interrupt Control Register 25" eventfld.long 0x64 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x64 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x64 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x64 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x68 "ICR26,Interrupt Control Register 26" eventfld.long 0x68 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x68 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x68 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x68 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x6C "ICR27,Interrupt Control Register 27" eventfld.long 0x6C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x6C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x6C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x6C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x70 "ICR28,Interrupt Control Register 28" eventfld.long 0x70 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x70 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x70 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x70 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x74 "ICR29,Interrupt Control Register 29" eventfld.long 0x74 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x74 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x74 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x74 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x78 "ICR30,Interrupt Control Register 30" eventfld.long 0x78 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x78 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x78 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x78 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x7C "ICR31,Interrupt Control Register 31" eventfld.long 0x7C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x7C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x7C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x7C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x80 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x80 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x80 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." line.long 0x84 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x84 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x84 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x120)++0x3 line.long 0x0 "ISFR[$1],Interrupt Status Flag Register" eventfld.long 0x0 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." repeat.end tree.end tree "GPIO5" base ad:0x43840000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 0.--3. 1. "IRQNUM,Interrupt Number" group.long 0xC++0x13 line.long 0x0 "LOCK,Lock" bitfld.long 0x0 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x0 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x0 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x0 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." line.long 0x4 "PCNS,Pin Control Non-Secure" bitfld.long 0x4 31. "NSE31,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 30. "NSE30,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 29. "NSE29,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 28. "NSE28,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 27. "NSE27,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 26. "NSE26,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 25. "NSE25,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 24. "NSE24,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 23. "NSE23,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 22. "NSE22,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 21. "NSE21,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 20. "NSE20,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 19. "NSE19,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 18. "NSE18,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 17. "NSE17,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 16. "NSE16,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 15. "NSE15,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 14. "NSE14,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 13. "NSE13,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 12. "NSE12,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 11. "NSE11,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 10. "NSE10,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 9. "NSE9,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 8. "NSE8,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 7. "NSE7,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 6. "NSE6,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 5. "NSE5,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 4. "NSE4,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 3. "NSE3,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 2. "NSE2,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." newline bitfld.long 0x4 1. "NSE1,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." bitfld.long 0x4 0. "NSE0,Non-Secure Enable" "0: The pin is configured for Secure access. Read or..,1: The pin is configured for Non-Secure access." line.long 0x8 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x8 1. "NSE1,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." bitfld.long 0x8 0. "NSE0,Non-Secure Enable" "0: The interrupt or DMA request is configured for..,1: The interrupt or DMA request is configured for.." line.long 0xC "PCNP,Pin Control Non-Privilege" bitfld.long 0xC 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." newline bitfld.long 0xC 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." bitfld.long 0xC 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access.,1: The pin is configured for Non-Privilege access.." line.long 0x10 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x10 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." bitfld.long 0x10 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for Privilege access. Only..,1: The pin is configured for Non-Privilege access." group.long 0x40++0xF line.long 0x0 "PDOR,Port Data Output Register" bitfld.long 0x0 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x0 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x0 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." line.long 0x4 "PSOR,Port Set Output Register" bitfld.long 0x4 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x4 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x4 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to.." line.long 0x8 "PCOR,Port Clear Output Register" bitfld.long 0x8 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." newline bitfld.long 0x8 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." bitfld.long 0x8 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is cleared to.." line.long 0xC "PTOR,Port Toggle Output Register" bitfld.long 0xC 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." newline bitfld.long 0xC 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." bitfld.long 0xC 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not change.,1: Corresponding field of PDOR[PDOn] is set to the.." rgroup.long 0x50++0x3 line.long 0x0 "PDIR,Port Data Input Register" bitfld.long 0x0 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." newline bitfld.long 0x0 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." bitfld.long 0x0 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not configured..,1: Pin logic level is logic 1." group.long 0x54++0x7 line.long 0x0 "PDDR,Port Data Direction Register" bitfld.long 0x0 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." newline bitfld.long 0x0 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." bitfld.long 0x0 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input for..,1: Pin is configured as general-purpose output for.." line.long 0x4 "PIDR,Port Input Disable Register" bitfld.long 0x4 31. "PID31,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 30. "PID30,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 29. "PID29,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 28. "PID28,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 27. "PID27,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 26. "PID26,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 25. "PID25,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 24. "PID24,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 23. "PID23,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 22. "PID22,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 21. "PID21,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 20. "PID20,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 19. "PID19,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 18. "PID18,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 17. "PID17,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 16. "PID16,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 15. "PID15,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 14. "PID14,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 13. "PID13,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 12. "PID12,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 11. "PID11,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 10. "PID10,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 9. "PID9,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 8. "PID8,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 7. "PID7,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 6. "PID6,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 5. "PID5,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 4. "PID4,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 3. "PID3,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 2. "PID2,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." newline bitfld.long 0x4 1. "PID1,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." bitfld.long 0x4 0. "PID0,Port Input Disable" "0: Pin is configured for general-purpose input..,1: Pin is disabled for general-purpose input." repeat 32. (increment 0x0 0x1)(increment 0x0 0x1) group.byte ($2+0x60)++0x0 line.byte 0x0 "PDR[$1],Pin Data Register a" bitfld.byte 0x0 0. "PD,Pin Data (input and output)" "0: Pin logic level is logic zero or not configured..,1: Pin logic level is logic one." repeat.end group.long 0x80++0x87 line.long 0x0 "ICR0,Interrupt Control Register 0" eventfld.long 0x0 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x0 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x0 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x0 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4 "ICR1,Interrupt Control Register 1" eventfld.long 0x4 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x8 "ICR2,Interrupt Control Register 2" eventfld.long 0x8 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x8 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x8 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x8 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0xC "ICR3,Interrupt Control Register 3" eventfld.long 0xC 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0xC 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0xC 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0xC 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x10 "ICR4,Interrupt Control Register 4" eventfld.long 0x10 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x10 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x10 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x10 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x14 "ICR5,Interrupt Control Register 5" eventfld.long 0x14 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x14 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x14 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x14 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x18 "ICR6,Interrupt Control Register 6" eventfld.long 0x18 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x18 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x18 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x18 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x1C "ICR7,Interrupt Control Register 7" eventfld.long 0x1C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x1C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x1C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x1C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x20 "ICR8,Interrupt Control Register 8" eventfld.long 0x20 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x20 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x20 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x20 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x24 "ICR9,Interrupt Control Register 9" eventfld.long 0x24 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x24 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x24 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x24 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x28 "ICR10,Interrupt Control Register 10" eventfld.long 0x28 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x28 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x28 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x28 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x2C "ICR11,Interrupt Control Register 11" eventfld.long 0x2C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x2C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x2C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x2C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x30 "ICR12,Interrupt Control Register 12" eventfld.long 0x30 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x30 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x30 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x30 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x34 "ICR13,Interrupt Control Register 13" eventfld.long 0x34 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x34 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x34 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x34 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x38 "ICR14,Interrupt Control Register 14" eventfld.long 0x38 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x38 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x38 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x38 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x3C "ICR15,Interrupt Control Register 15" eventfld.long 0x3C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x3C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x3C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x3C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x40 "ICR16,Interrupt Control Register 16" eventfld.long 0x40 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x40 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x40 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x40 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x44 "ICR17,Interrupt Control Register 17" eventfld.long 0x44 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x44 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x44 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x44 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x48 "ICR18,Interrupt Control Register 18" eventfld.long 0x48 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x48 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x48 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x48 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x4C "ICR19,Interrupt Control Register 19" eventfld.long 0x4C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x4C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x4C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x4C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x50 "ICR20,Interrupt Control Register 20" eventfld.long 0x50 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x50 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x50 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x50 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x54 "ICR21,Interrupt Control Register 21" eventfld.long 0x54 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x54 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x54 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x54 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x58 "ICR22,Interrupt Control Register 22" eventfld.long 0x58 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x58 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x58 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x58 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x5C "ICR23,Interrupt Control Register 23" eventfld.long 0x5C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x5C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x5C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x5C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x60 "ICR24,Interrupt Control Register 24" eventfld.long 0x60 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x60 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x60 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x60 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x64 "ICR25,Interrupt Control Register 25" eventfld.long 0x64 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x64 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x64 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x64 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x68 "ICR26,Interrupt Control Register 26" eventfld.long 0x68 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x68 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x68 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x68 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x6C "ICR27,Interrupt Control Register 27" eventfld.long 0x6C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x6C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x6C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x6C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x70 "ICR28,Interrupt Control Register 28" eventfld.long 0x70 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x70 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x70 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x70 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x74 "ICR29,Interrupt Control Register 29" eventfld.long 0x74 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x74 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x74 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x74 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x78 "ICR30,Interrupt Control Register 30" eventfld.long 0x78 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x78 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x78 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x78 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x7C "ICR31,Interrupt Control Register 31" eventfld.long 0x7C 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected.,1: Configured interrupt is detected. If the pin is.." bitfld.long 0x7C 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is locked.." newline bitfld.long 0x7C 20. "IRQS,Interrupt Select" "0: Interrupt/DMA request 0.,1: Interrupt/DMA request 1." hexmask.long.byte 0x7C 16.--19. 1. "IRQC,Interrupt Configuration" line.long 0x80 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x80 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x80 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x80 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x80 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." line.long 0x84 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x84 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x84 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." bitfld.long 0x84 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." newline bitfld.long 0x84 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt Control..,1: Upper 16-bit of corresponding Interrupt Control.." repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x120)++0x3 line.long 0x0 "ISFR[$1],Interrupt Status Flag Register" eventfld.long 0x0 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." newline eventfld.long 0x0 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." eventfld.long 0x0 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the pin..,1: Configured interrupt is detected on the pin of.." repeat.end tree.end tree.end tree "WAKEUP_ROMCP" base ad:0x42640000 repeat 16. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0xB4)++0x3 line.long 0x0 "ROMPATCHD$1,Data Registers" hexmask.long 0x0 0.--31. 1. "DATAX,Data Fix Registers" repeat.end group.long 0xF4++0x3 line.long 0x0 "ROMPATCHCNTL,Control Register" bitfld.long 0x0 31. "LK,Register Lock" "0: All registers remain accessible (unlocked).,1: Lock access to all registers. All ROMCP register.." bitfld.long 0x0 29. "DIS,Patch Disable" "0: Does not affect any Patch operations (default),1: Disables all Patch operations: data fixing and.." newline bitfld.long 0x0 15. "DATAFIX15,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 14. "DATAFIX14,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 13. "DATAFIX13,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 12. "DATAFIX12,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 11. "DATAFIX11,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 10. "DATAFIX10,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 9. "DATAFIX9,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 8. "DATAFIX8,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 7. "DATAFIX7,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 6. "DATAFIX6,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 5. "DATAFIX5,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 4. "DATAFIX4,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 3. "DATAFIX3,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 2. "DATAFIX2,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" newline bitfld.long 0x0 1. "DATAFIX1,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" bitfld.long 0x0 0. "DATAFIX0,Data Fix Enable" "0: Trigger an opcode patch,1: Trigger a data fix" rgroup.long 0xF8++0x3 line.long 0x0 "ROMPATCHENH,Enable Register High" group.long 0xFC++0x3 line.long 0x0 "ROMPATCHENL,Enable Register Low" hexmask.long 0x0 0.--31. 1. "ENABLE,Enable Address Comparator" repeat 32. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x100)++0x3 line.long 0x0 "ROMPATCHA[$1],Address Registers" hexmask.long.tbyte 0x0 1.--22. 1. "ADDRX,Address Comparator Registers" bitfld.long 0x0 0. "THUMBX,THUMB Comparator Select" "0: ARM patch,1: THUMB patch (ignore if a data fix)" repeat.end group.long 0x208++0x3 line.long 0x0 "ROMPATCHSR,Status Register" eventfld.long 0x0 17. "SW,ROMCP AHB Multiple Address Comparator Match Indicator" "0: No event or comparator collisions have occurred,1: A collision has occurred" hexmask.long.byte 0x0 0.--5. 1. "SOURCE,ROMCP Source Number" tree.end tree "WAKEUP_SAI" tree "SAI3" base ad:0x42650000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--19. 1. "FRAME,Frame Size" hexmask.long.byte 0x4 8.--11. 1. "FIFO,FIFO Size" newline hexmask.long.byte 0x4 0.--3. 1. "DATALINE,Number of Datalinks" group.long 0x8++0x1B line.long 0x0 "TCSR,Transmit Control" bitfld.long 0x0 31. "TE,Transmitter Enable" "0: Transmitter is disabled.,1: Transmitter is enabled or transmitter has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode.,1: Transmitter enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled.,1: Transmit bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected.,1: Transmit underrun detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty.,1: Enabled transmit FIFO is empty." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached.,1: Transmit FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA warning.,1: Enables the DMA warning." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "TCR1,Transmit Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "TFW,Transmit FIFO Watermark" line.long 0x8 "TCR2,Transmit Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "TCR3,Transmit Configuration 3" bitfld.long 0xC 16. "TCE,Transmit Channel Enable" "0,1" hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "TCR4,Transmit Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled.,?,2: 8-bit FIFO packing is enabled.,3: 16-bit FIFO packing is enabled." newline hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame size" hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" newline bitfld.long 0x10 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are 3-stated when..,1: Output mode transmit data pins are never.." bitfld.long 0x10 4. "MF,MSB First" "0: LSB is transmitted first.,1: MSB is transmitted first." newline bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." newline bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave mode.,1: Frame sync is generated internally in Master mode." line.long 0x14 "TCR5,Transmit Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" line.long 0x18 "TDR0,Transmit Data" hexmask.long 0x18 0.--31. 1. "TDR,Transmit Data Register" rgroup.long 0x40++0x3 line.long 0x0 "TFR0,Transmit FIFO" hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" group.long 0x60++0x3 line.long 0x0 "TMR,Transmit Mask" hexmask.long 0x0 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x3 line.long 0x0 "TTCR,Transmit Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the receive..,2: Timestamp counter increments when the transmit..,3: Timestamp counter increments when the receive.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0x74++0xB line.long 0x0 "TTSR,Transmit Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "TBCR,Transmit Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x17 line.long 0x0 "RCSR,Receive Control" bitfld.long 0x0 31. "RE,Receiver Enable" "0: Receiver is disabled.,1: Receiver is enabled or receiver has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode.,1: Receiver enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled.,1: Receive bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect.,1: Software reset." newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected.,1: Receive overflow detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full.,1: Enabled receive FIFO is full." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached.,1: Receive FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables DMA warnings.,1: Enables DMA warnings." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "RCR1,Receive Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "RFW,Receive FIFO Watermark" line.long 0x8 "RCR2,Receive Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "RCR3,Receive Configuration 3" bitfld.long 0xC 16. "RCE,Receive Channel Enable" "0,1" hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "RCR4,Receive Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" newline hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame Size" hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" newline bitfld.long 0x10 4. "MF,MSB First" "0: LSB is received first.,1: MSB is received first." bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." newline bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." newline bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave mode.,1: Frame Sync is generated internally in Master mode." line.long 0x14 "RCR5,Receive Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" rgroup.long 0xA0++0x3 line.long 0x0 "RDR0,Receive Data" hexmask.long 0x0 0.--31. 1. "RDR,Receive Data Register" rgroup.long 0xC0++0x3 line.long 0x0 "RFR0,Receive FIFO" hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" group.long 0xE0++0x3 line.long 0x0 "RMR,Receive Mask" hexmask.long 0x0 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x3 line.long 0x0 "RTCR,Receive Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the transmit..,2: Timestamp counter increments when the receive..,3: Timestamp counter increments when the transmit.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0xF4++0xB line.long 0x0 "RTSR,Receive Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "RBCR,Receive Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x100++0x3 line.long 0x0 "MCR,MCLK Control" bitfld.long 0x0 30. "MOE,MCLK Output Enable" "0: MCLK signal pin is an input.,1: MCLK signal pin is an output." bitfld.long 0x0 24.--25. "MSEL,MCLK Select" "0: Master Clock (MCLK) 1 option selected.,?,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x0 23. "DIVEN,MCLK Post Divide Enable" "0: Output on MCLK signal pin is the audio master..,1: Output on MCLK signal pin is a post-divided.." hexmask.long.byte 0x0 0.--7. 1. "DIV,MCLK Post Divide" tree.end tree "SAI4" base ad:0x42660000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--19. 1. "FRAME,Frame Size" hexmask.long.byte 0x4 8.--11. 1. "FIFO,FIFO Size" newline hexmask.long.byte 0x4 0.--3. 1. "DATALINE,Number of Datalinks" group.long 0x8++0x17 line.long 0x0 "TCSR,Transmit Control" bitfld.long 0x0 31. "TE,Transmitter Enable" "0: Transmitter is disabled.,1: Transmitter is enabled or transmitter has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode.,1: Transmitter enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled.,1: Transmit bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected.,1: Transmit underrun detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty.,1: Enabled transmit FIFO is empty." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached.,1: Transmit FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA warning.,1: Enables the DMA warning." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "TCR1,Transmit Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "TFW,Transmit FIFO Watermark" line.long 0x8 "TCR2,Transmit Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "TCR3,Transmit Configuration 3" bitfld.long 0xC 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0xC 16.--17. "TCE,Transmit Channel Enable" "0,1,2,3" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "TCR4,Transmit Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO reads (from..,2: FIFO Combine mode enabled on FIFO writes (by..,3: FIFO Combine mode enabled on FIFO reads (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled.,?,2: 8-bit FIFO packing is enabled.,3: 16-bit FIFO packing is enabled." hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are 3-stated when..,1: Output mode transmit data pins are never.." newline bitfld.long 0x10 4. "MF,MSB First" "0: LSB is transmitted first.,1: MSB is transmitted first." bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." newline bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." newline bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave mode.,1: Frame sync is generated internally in Master mode." line.long 0x14 "TCR5,Transmit Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x20)++0x3 line.long 0x0 "TDR[$1],Transmit Data" hexmask.long 0x0 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x40)++0x3 line.long 0x0 "TFR[$1],Transmit FIFO" bitfld.long 0x0 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO Combine mode is enabled for FIFO writes and.." hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" newline hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0x60++0x3 line.long 0x0 "TMR,Transmit Mask" hexmask.long 0x0 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x3 line.long 0x0 "TTCR,Transmit Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the receive..,2: Timestamp counter increments when the transmit..,3: Timestamp counter increments when the receive.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0x74++0xB line.long 0x0 "TTSR,Transmit Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "TBCR,Transmit Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x17 line.long 0x0 "RCSR,Receive Control" bitfld.long 0x0 31. "RE,Receiver Enable" "0: Receiver is disabled.,1: Receiver is enabled or receiver has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode.,1: Receiver enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled.,1: Receive bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect.,1: Software reset." newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected.,1: Receive overflow detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full.,1: Enabled receive FIFO is full." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached.,1: Receive FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables DMA warnings.,1: Enables DMA warnings." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "RCR1,Receive Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "RFW,Receive FIFO Watermark" line.long 0x8 "RCR2,Receive Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "RCR3,Receive Configuration 3" bitfld.long 0xC 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0xC 16.--17. "RCE,Receive Channel Enable" "0,1,2,3" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "RCR4,Receive Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO writes (from..,2: FIFO Combine mode enabled on FIFO reads (by..,3: FIFO Combine mode enabled on FIFO writes (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame Size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 4. "MF,MSB First" "0: LSB is received first.,1: MSB is received first." newline bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." newline bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave mode.,1: Frame Sync is generated internally in Master mode." line.long 0x14 "RCR5,Receive Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xA0)++0x3 line.long 0x0 "RDR[$1],Receive Data" hexmask.long 0x0 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 2. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xC0)++0x3 line.long 0x0 "RFR[$1],Receive FIFO" hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" bitfld.long 0x0 15. "RCP,Receive Channel Pointer" "0: No effect.,1: FIFO Combine mode is enabled for FIFO reads and.." newline hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0xE0++0x3 line.long 0x0 "RMR,Receive Mask" hexmask.long 0x0 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x3 line.long 0x0 "RTCR,Receive Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the transmit..,2: Timestamp counter increments when the receive..,3: Timestamp counter increments when the transmit.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0xF4++0xB line.long 0x0 "RTSR,Receive Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "RBCR,Receive Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x100++0x3 line.long 0x0 "MCR,MCLK Control" bitfld.long 0x0 30. "MOE,MCLK Output Enable" "0: MCLK signal pin is an input.,1: MCLK signal pin is an output." bitfld.long 0x0 24.--25. "MSEL,MCLK Select" "0: Master Clock (MCLK) 1 option selected.,?,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x0 23. "DIVEN,MCLK Post Divide Enable" "0: Output on MCLK signal pin is the audio master..,1: Output on MCLK signal pin is a post-divided.." hexmask.long.byte 0x0 0.--7. 1. "DIV,MCLK Post Divide" tree.end tree "SAI5" base ad:0x42670000 rgroup.long 0x0++0x7 line.long 0x0 "VERID,Version ID" hexmask.long.byte 0x0 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x0 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x0 0.--15. 1. "FEATURE,Feature Specification Number" line.long 0x4 "PARAM,Parameter" hexmask.long.byte 0x4 16.--19. 1. "FRAME,Frame Size" hexmask.long.byte 0x4 8.--11. 1. "FIFO,FIFO Size" newline hexmask.long.byte 0x4 0.--3. 1. "DATALINE,Number of Datalinks" group.long 0x8++0x17 line.long 0x0 "TCSR,Transmit Control" bitfld.long 0x0 31. "TE,Transmitter Enable" "0: Transmitter is disabled.,1: Transmitter is enabled or transmitter has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode.,1: Transmitter enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled.,1: Transmit bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected.,1: Transmit underrun detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty.,1: Enabled transmit FIFO is empty." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached.,1: Transmit FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA warning.,1: Enables the DMA warning." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "TCR1,Transmit Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "TFW,Transmit FIFO Watermark" line.long 0x8 "TCR2,Transmit Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "TCR3,Transmit Configuration 3" hexmask.long.byte 0xC 24.--27. 1. "CFR,Channel FIFO Reset" hexmask.long.byte 0xC 16.--19. 1. "TCE,Transmit Channel Enable" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "TCR4,Transmit Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO reads (from..,2: FIFO Combine mode enabled on FIFO writes (by..,3: FIFO Combine mode enabled on FIFO reads (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled.,?,2: 8-bit FIFO packing is enabled.,3: 16-bit FIFO packing is enabled." hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are 3-stated when..,1: Output mode transmit data pins are never.." newline bitfld.long 0x10 4. "MF,MSB First" "0: LSB is transmitted first.,1: MSB is transmitted first." bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." newline bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." newline bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave mode.,1: Frame sync is generated internally in Master mode." line.long 0x14 "TCR5,Transmit Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) group.long ($2+0x20)++0x3 line.long 0x0 "TDR[$1],Transmit Data" hexmask.long 0x0 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x40)++0x3 line.long 0x0 "TFR[$1],Transmit FIFO" bitfld.long 0x0 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO Combine mode is enabled for FIFO writes and.." hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" newline hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0x60++0x3 line.long 0x0 "TMR,Transmit Mask" hexmask.long 0x0 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x3 line.long 0x0 "TTCR,Transmit Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the receive..,2: Timestamp counter increments when the transmit..,3: Timestamp counter increments when the receive.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0x74++0xB line.long 0x0 "TTSR,Transmit Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "TBCR,Transmit Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x17 line.long 0x0 "RCSR,Receive Control" bitfld.long 0x0 31. "RE,Receiver Enable" "0: Receiver is disabled.,1: Receiver is enabled or receiver has been.." bitfld.long 0x0 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode.,1: Receiver enabled in Stop mode." newline bitfld.long 0x0 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode." bitfld.long 0x0 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled.,1: Receive bit clock is enabled." newline bitfld.long 0x0 25. "FR,FIFO Reset" "0: No effect.,1: FIFO reset." bitfld.long 0x0 24. "SR,Software Reset" "0: No effect.,1: Software reset." newline eventfld.long 0x0 20. "WSF,Word Start Flag" "0: Start of word not detected.,1: Start of word detected." eventfld.long 0x0 19. "SEF,Sync Error Flag" "0: Sync error not detected.,1: Frame sync error detected." newline eventfld.long 0x0 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected.,1: Receive overflow detected." rbitfld.long 0x0 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full.,1: Enabled receive FIFO is full." newline rbitfld.long 0x0 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached.,1: Receive FIFO watermark has been reached." bitfld.long 0x0 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." newline bitfld.long 0x0 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt.,1: Enables interrupt." bitfld.long 0x0 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." bitfld.long 0x0 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt.,1: Enables the interrupt." newline bitfld.long 0x0 1. "FWDE,FIFO Warning DMA Enable" "0: Disables DMA warnings.,1: Enables DMA warnings." bitfld.long 0x0 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request.,1: Enables the DMA request." line.long 0x4 "RCR1,Receive Configuration 1" hexmask.long.byte 0x4 0.--6. 1. "RFW,Receive FIFO Watermark" line.long 0x8 "RCR2,Receive Configuration 2" bitfld.long 0x8 30. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter" bitfld.long 0x8 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source.,1: Swap the bit clock source." newline bitfld.long 0x8 28. "BCI,Bit Clock Input" "0: No effect.,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x8 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected.,1: Master Clock (MCLK) 1 option selected.,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x8 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs on..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x8 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode.,1: Bit clock is generated internally in Master mode." newline bitfld.long 0x8 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit clock..,1: Internal bit clock is divide-by-one of the audio.." hexmask.long.byte 0x8 0.--7. 1. "DIV,Bit Clock Divide" line.long 0xC "RCR3,Receive Configuration 3" hexmask.long.byte 0xC 24.--27. 1. "CFR,Channel FIFO Reset" hexmask.long.byte 0xC 16.--19. 1. "RCE,Receive Channel Enable" newline hexmask.long.byte 0xC 0.--4. 1. "WDFL,Word Flag Configuration" line.long 0x10 "RCR4,Receive Configuration 4" bitfld.long 0x10 28. "FCONT,FIFO Continue on Error" "0: On FIFO error SAI continues from the start of..,1: On FIFO error SAI continues from the same word.." bitfld.long 0x10 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO Combine mode disabled.,1: FIFO Combine mode enabled on FIFO writes (from..,2: FIFO Combine mode enabled on FIFO reads (by..,3: FIFO Combine mode enabled on FIFO writes (from.." newline bitfld.long 0x10 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" hexmask.long.byte 0x10 16.--20. 1. "FRSZ,Frame Size" newline hexmask.long.byte 0x10 8.--12. 1. "SYWD,Sync Width" bitfld.long 0x10 4. "MF,MSB First" "0: LSB is received first.,1: MSB is received first." newline bitfld.long 0x10 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first bit.." bitfld.long 0x10 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously.,1: Internal frame sync is generated when the FIFO.." newline bitfld.long 0x10 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high.,1: Frame sync is active low." bitfld.long 0x10 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave mode.,1: Frame Sync is generated internally in Master mode." line.long 0x14 "RCR5,Receive Configuration 5" hexmask.long.byte 0x14 24.--28. 1. "WNW,Word N Width" hexmask.long.byte 0x14 16.--20. 1. "W0W,Word 0 Width" newline hexmask.long.byte 0x14 8.--12. 1. "FBT,First Bit Shifted" repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xA0)++0x3 line.long 0x0 "RDR[$1],Receive Data" hexmask.long 0x0 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 4. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0xC0)++0x3 line.long 0x0 "RFR[$1],Receive FIFO" hexmask.long.byte 0x0 16.--23. 1. "WFP,Write FIFO Pointer" bitfld.long 0x0 15. "RCP,Receive Channel Pointer" "0: No effect.,1: FIFO Combine mode is enabled for FIFO reads and.." newline hexmask.long.byte 0x0 0.--7. 1. "RFP,Read FIFO Pointer" repeat.end group.long 0xE0++0x3 line.long 0x0 "RMR,Receive Mask" hexmask.long 0x0 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x3 line.long 0x0 "RTCR,Receive Timestamp Control" bitfld.long 0x0 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset.,1: Bit counter is reset." bitfld.long 0x0 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset.,1: Timestamp counter is reset." newline bitfld.long 0x0 2.--3. "TSSEL,Timestamp Select" "0: Timestamp counter increments when enabled.,1: Timestamp counter increments when the transmit..,2: Timestamp counter increments when the receive..,3: Timestamp counter increments when the transmit.." bitfld.long 0x0 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." newline bitfld.long 0x0 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled.,1: Timestamp counter is enabled." rgroup.long 0xF4++0xB line.long 0x0 "RTSR,Receive Timestamp" hexmask.long 0x0 0.--31. 1. "TSC,Timestamp Counter" line.long 0x4 "RBCR,Receive Bit Count" hexmask.long 0x4 0.--31. 1. "BCNT,Bit Counter" line.long 0x8 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x8 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x100++0x3 line.long 0x0 "MCR,MCLK Control" bitfld.long 0x0 30. "MOE,MCLK Output Enable" "0: MCLK signal pin is an input.,1: MCLK signal pin is an output." bitfld.long 0x0 24.--25. "MSEL,MCLK Select" "0: Master Clock (MCLK) 1 option selected.,?,2: Master Clock (MCLK) 2 option selected.,3: Master Clock (MCLK) 3 option selected." newline bitfld.long 0x0 23. "DIVEN,MCLK Post Divide Enable" "0: Output on MCLK signal pin is the audio master..,1: Output on MCLK signal pin is a post-divided.." hexmask.long.byte 0x0 0.--7. 1. "DIV,MCLK Post Divide" tree.end tree.end tree "WAKEUP_SEMA42" base ad:0x42450000 group.byte 0x0++0x3F line.byte 0x0 "GATE3,Gate" hexmask.byte 0x0 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1 "GATE2,Gate" hexmask.byte 0x1 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2 "GATE1,Gate" hexmask.byte 0x2 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3 "GATE0,Gate" hexmask.byte 0x3 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x4 "GATE7,Gate" hexmask.byte 0x4 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x5 "GATE6,Gate" hexmask.byte 0x5 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x6 "GATE5,Gate" hexmask.byte 0x6 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x7 "GATE4,Gate" hexmask.byte 0x7 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x8 "GATE11,Gate" hexmask.byte 0x8 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x9 "GATE10,Gate" hexmask.byte 0x9 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xA "GATE9,Gate" hexmask.byte 0xA 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xB "GATE8,Gate" hexmask.byte 0xB 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xC "GATE15,Gate" hexmask.byte 0xC 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xD "GATE14,Gate" hexmask.byte 0xD 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xE "GATE13,Gate" hexmask.byte 0xE 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0xF "GATE12,Gate" hexmask.byte 0xF 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x10 "GATE19,Gate" hexmask.byte 0x10 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x11 "GATE18,Gate" hexmask.byte 0x11 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x12 "GATE17,Gate" hexmask.byte 0x12 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x13 "GATE16,Gate" hexmask.byte 0x13 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x14 "GATE23,Gate" hexmask.byte 0x14 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x15 "GATE22,Gate" hexmask.byte 0x15 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x16 "GATE21,Gate" hexmask.byte 0x16 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x17 "GATE20,Gate" hexmask.byte 0x17 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x18 "GATE27,Gate" hexmask.byte 0x18 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x19 "GATE26,Gate" hexmask.byte 0x19 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1A "GATE25,Gate" hexmask.byte 0x1A 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1B "GATE24,Gate" hexmask.byte 0x1B 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1C "GATE31,Gate" hexmask.byte 0x1C 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1D "GATE30,Gate" hexmask.byte 0x1D 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1E "GATE29,Gate" hexmask.byte 0x1E 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x1F "GATE28,Gate" hexmask.byte 0x1F 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x20 "GATE35,Gate" hexmask.byte 0x20 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x21 "GATE34,Gate" hexmask.byte 0x21 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x22 "GATE33,Gate" hexmask.byte 0x22 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x23 "GATE32,Gate" hexmask.byte 0x23 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x24 "GATE39,Gate" hexmask.byte 0x24 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x25 "GATE38,Gate" hexmask.byte 0x25 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x26 "GATE37,Gate" hexmask.byte 0x26 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x27 "GATE36,Gate" hexmask.byte 0x27 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x28 "GATE43,Gate" hexmask.byte 0x28 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x29 "GATE42,Gate" hexmask.byte 0x29 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2A "GATE41,Gate" hexmask.byte 0x2A 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2B "GATE40,Gate" hexmask.byte 0x2B 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2C "GATE47,Gate" hexmask.byte 0x2C 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2D "GATE46,Gate" hexmask.byte 0x2D 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2E "GATE45,Gate" hexmask.byte 0x2E 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x2F "GATE44,Gate" hexmask.byte 0x2F 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x30 "GATE51,Gate" hexmask.byte 0x30 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x31 "GATE50,Gate" hexmask.byte 0x31 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x32 "GATE49,Gate" hexmask.byte 0x32 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x33 "GATE48,Gate" hexmask.byte 0x33 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x34 "GATE55,Gate" hexmask.byte 0x34 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x35 "GATE54,Gate" hexmask.byte 0x35 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x36 "GATE53,Gate" hexmask.byte 0x36 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x37 "GATE52,Gate" hexmask.byte 0x37 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x38 "GATE59,Gate" hexmask.byte 0x38 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x39 "GATE58,Gate" hexmask.byte 0x39 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3A "GATE57,Gate" hexmask.byte 0x3A 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3B "GATE56,Gate" hexmask.byte 0x3B 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3C "GATE63,Gate" hexmask.byte 0x3C 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3D "GATE62,Gate" hexmask.byte 0x3D 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3E "GATE61,Gate" hexmask.byte 0x3E 0.--3. 1. "GTFSM,Gate Finite State Machine" line.byte 0x3F "GATE60,Gate" hexmask.byte 0x3F 0.--3. 1. "GTFSM,Gate Finite State Machine" rgroup.word 0x42++0x1 line.word 0x0 "RSTGT_R,Reset Gate Read" bitfld.word 0x0 12.--13. "RSTGSM,Reset Gate Finite State Machine" "0: Idle waiting for the first data pattern write.,1: Waiting for the second data pattern write,2: The 2-write sequence has completed. Generate the..,?" hexmask.word.byte 0x0 8.--11. 1. "RSTGMS,Reset Gate Domain" hexmask.word.byte 0x0 0.--7. 1. "RSTGTN,Reset Gate Number" wgroup.word 0x42++0x1 line.word 0x0 "RSTGT_W,Reset Gate Write" hexmask.word.byte 0x0 8.--15. 1. "RSTGDP,Reset Gate Data Pattern" hexmask.word.byte 0x0 0.--7. 1. "RSTGTN,Reset Gate Number" tree.end tree "WAKEUP_USDHC" tree "USDHC1" base ad:0x42850000 group.long 0x0++0xF line.long 0x0 "DS_ADDR,DMA System Address" hexmask.long 0x0 0.--31. 1. "DS_ADDR,System address" line.long 0x4 "BLK_ATT,Block Attributes" hexmask.long.word 0x4 16.--31. 1. "BLKCNT,Blocks count for current transfer" newline hexmask.long.word 0x4 0.--12. 1. "BLKSIZE,Transfer block size" line.long 0x8 "CMD_ARG,Command Argument" hexmask.long 0x8 0.--31. 1. "CMDARG,Command argument" line.long 0xC "CMD_XFR_TYP,Command Transfer Type" hexmask.long.byte 0xC 24.--29. 1. "CMDINX,Command index" newline bitfld.long 0xC 22.--23. "CMDTYP,Command type" "0: Normal other commands,1: Suspend CMD52 for writing bus suspend in CCCR,2: Resume CMD52 for writing function select in CCCR,3: Abort CMD12 CMD52 for writing I/O Abort in CCCR" newline bitfld.long 0xC 21. "DPSEL,Data present select" "0: No data present,1: Data present" newline bitfld.long 0xC 20. "CICEN,Command index check enable" "0: Disable command index check,1: Enables command index check" newline bitfld.long 0xC 19. "CCCEN,Command CRC check enable" "0: Disables command CRC check,1: Enables command CRC check" newline bitfld.long 0xC 16.--17. "RSPTYP,Response type select" "0: No response,1: Response length 136,2: Response length 48,3: Response length 48 check busy after response" newline bitfld.long 0xC 7. "AC23EN,AC23EN" "0: Disable,1: Enable" newline bitfld.long 0xC 6. "NIBBLE_POS,NIBBLE_POS" "0: Disable,1: Enable" newline bitfld.long 0xC 5. "MSBSEL,MSBSEL" "0: Disable,1: Enable" newline bitfld.long 0xC 4. "DTDSEL,DTDSEL" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "DDR_EN,DDR_EN" "0: Disable,1: Enable" newline bitfld.long 0xC 2. "AC12EN,AC12EN" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "BCEN,BCEN" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "DMAEN,DMAEN" "0: Disable,1: Enable" rgroup.long 0x10++0xF line.long 0x0 "CMD_RSP0,Command Response0" hexmask.long 0x0 0.--31. 1. "CMDRSP0,Command response 0" line.long 0x4 "CMD_RSP1,Command Response1" hexmask.long 0x4 0.--31. 1. "CMDRSP1,Command response 1" line.long 0x8 "CMD_RSP2,Command Response2" hexmask.long 0x8 0.--31. 1. "CMDRSP2,Command response 2" line.long 0xC "CMD_RSP3,Command Response3" hexmask.long 0xC 0.--31. 1. "CMDRSP3,Command response 3" group.long 0x20++0x3 line.long 0x0 "DATA_BUFF_ACC_PORT,Data Buffer Access Port" hexmask.long 0x0 0.--31. 1. "DATCONT,Data content" rgroup.long 0x24++0x3 line.long 0x0 "PRES_STATE,Present State" hexmask.long.byte 0x0 24.--31. 1. "DLSL,DATA[7:0] line signal level" newline bitfld.long 0x0 23. "CLSL,CMD line signal level" "0,1" newline bitfld.long 0x0 19. "WPSPL,Write protect switch pin level" "0: Write protected (WP = 1),1: Write enabled (WP = 0)" newline bitfld.long 0x0 18. "CDPL,Card detect pin level" "0: No card present (CD_B = 1),1: Card present (CD_B = 0)" newline bitfld.long 0x0 16. "CINST,Card inserted" "0: Power on reset or no card,1: Card inserted" newline bitfld.long 0x0 15. "TSCD,Tap select change done" "0: Delay cell select change is not finished.,1: Delay cell select change is finished." newline bitfld.long 0x0 12. "RTR,Re-Tuning Request (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Fixed or well tuned sampling clock,1: Sampling clock needs re-tuning" newline bitfld.long 0x0 11. "BREN,Buffer read enable" "0: Read disable,1: Read enable" newline bitfld.long 0x0 10. "BWEN,Buffer write enable" "0: Write disable,1: Write enable" newline bitfld.long 0x0 9. "RTA,Read transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x0 8. "WTA,Write transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x0 3. "SDSTB,SD clock stable" "0: Clock is changing frequency and not stable.,1: Clock is stable." newline bitfld.long 0x0 2. "DLA,Data line active" "0: DATA line inactive,1: DATA line active" newline bitfld.long 0x0 1. "CDIHB,Command Inhibit Data (DATA)" "0: Can issue command that uses the DATA line,1: Cannot issue command that uses the DATA line" newline bitfld.long 0x0 0. "CIHB,Command inhibit (CMD)" "0: Can issue command using only CMD line,1: Cannot issue command" group.long 0x28++0x23 line.long 0x0 "PROT_CTRL,Protocol Control" bitfld.long 0x0 30. "NON_EXACT_BLK_RD,Non-exact block read" "0: The block read is exact block read. Host driver..,1: The block read is non-exact block read. Host.." newline bitfld.long 0x0 26. "WECRM,Wakeup event enable on SD card removal" "0: Disables wakeup event enable on SD card removal,1: Enables wakeup event enable on SD card removal" newline bitfld.long 0x0 25. "WECINS,Wakeup event enable on SD card insertion" "0: Disable wakeup event enable on SD card insertion,1: Enable wakeup event enable on SD card insertion" newline bitfld.long 0x0 24. "WECINT,Wakeup event enable on card interrupt" "0: Disables wakeup event enable on card interrupt,1: Enables wakeup event enable on card interrupt" newline bitfld.long 0x0 20. "RD_DONE_NO_8CLK,Read performed number 8 clock" "0,1" newline bitfld.long 0x0 19. "IABG,Interrupt at block gap" "0: Disables interrupt at block gap,1: Enables interrupt at block gap" newline bitfld.long 0x0 18. "RWCTL,Read wait control" "0: Disables read wait control and stop SD clock at..,1: Enables read wait control and assert read wait.." newline bitfld.long 0x0 17. "CREQ,Continue request" "0: No effect,1: Restart" newline bitfld.long 0x0 16. "SABGREQ,Stop at block gap request" "0: Transfer,1: Stop" newline bitfld.long 0x0 8.--9. "DMASEL,DMA select" "0: No DMA or simple DMA is selected.,1: ADMA1 is selected.,2: ADMA2 is selected.,?" newline bitfld.long 0x0 7. "CDSS,Card detect signal selection" "0: Card detection level is selected (for normal..,1: Card detection test level is selected (for test.." newline bitfld.long 0x0 6. "CDTL,Card detect test level" "0: Card detect test level is 0 no card inserted,1: Card detect test level is 1 card inserted" newline bitfld.long 0x0 4.--5. "EMODE,Endian mode" "0: Big endian mode,1: Half word big endian mode,2: Little endian mode,?" newline bitfld.long 0x0 3. "D3CD,DATA3 as card detection pin" "0: DATA3 does not monitor card insertion,1: DATA3 as card detection pin" newline bitfld.long 0x0 1.--2. "DTW,Data transfer width" "0: 1-bit mode,1: 4-bit mode,2: 8-bit mode,?" line.long 0x4 "SYS_CTRL,System Control" bitfld.long 0x4 28. "RSTT,Reset tuning" "0,1" newline bitfld.long 0x4 27. "INITA,Initialization active" "0,1" newline bitfld.long 0x4 26. "RSTD,Software reset for data line" "0: No reset,1: Reset" newline bitfld.long 0x4 25. "RSTC,Software reset for CMD line" "0: No reset,1: Reset" newline bitfld.long 0x4 24. "RSTA,Software reset for all" "0: No reset,1: Reset" newline bitfld.long 0x4 23. "IPP_RST_N,Hardware reset" "0,1" newline hexmask.long.byte 0x4 16.--19. 1. "DTOCV,Data timeout counter value" newline hexmask.long.byte 0x4 8.--15. 1. "SDCLKFS,SDCLK frequency select" newline hexmask.long.byte 0x4 4.--7. 1. "DVS,Divisor" line.long 0x8 "INT_STATUS,Interrupt Status" eventfld.long 0x8 28. "DMAE,DMA error" "0: No error,1: Error" newline eventfld.long 0x8 26. "TNE,Tuning error: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x8 24. "AC12E,Auto CMD12 error" "0: No error,1: Error" newline eventfld.long 0x8 22. "DEBE,Data end bit error" "0: No error,1: Error" newline eventfld.long 0x8 21. "DCE,Data CRC error" "0: No error,1: Error" newline eventfld.long 0x8 20. "DTOE,Data timeout error" "0: No error,1: Time out" newline eventfld.long 0x8 19. "CIE,Command index error" "0: No error,1: Error" newline eventfld.long 0x8 18. "CEBE,Command end bit error" "0: No error,1: End bit error generated" newline eventfld.long 0x8 17. "CCE,Command CRC error" "0: No error,1: CRC error generated" newline eventfld.long 0x8 16. "CTOE,Command timeout error" "0: No error,1: Time out" newline rbitfld.long 0x8 15. "ERR_INT_STATUS,Error Interrupt Status" "0,1" newline eventfld.long 0x8 14. "CQI,Command queuing interrupt" "0,1" newline eventfld.long 0x8 13. "TP,Tuning pass:(only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x8 12. "RTE,Re-tuning event: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Re-tuning is not required.,1: Re-tuning should be performed." newline eventfld.long 0x8 8. "CINT,Card interrupt" "0: No card interrupt,1: Generate card interrupt" newline eventfld.long 0x8 7. "CRM,Card removal" "0: Card state unstable or inserted,1: Card removed" newline eventfld.long 0x8 6. "CINS,Card insertion" "0: Card state unstable or removed,1: Card inserted" newline eventfld.long 0x8 5. "BRR,Buffer read ready" "0: Not ready to read buffer,1: Ready to read buffer" newline eventfld.long 0x8 4. "BWR,Buffer write ready" "0: Not ready to write buffer,1: Ready to write buffer" newline eventfld.long 0x8 3. "DINT,DMA interrupt" "0: No DMA interrupt,1: DMA interrupt is generated." newline eventfld.long 0x8 2. "BGE,Block gap event" "0: No block gap event,1: Transaction stopped at block gap" newline eventfld.long 0x8 1. "TC,Transfer complete" "0: Transfer does not complete,1: Transfer complete" newline eventfld.long 0x8 0. "CC,Command complete" "0: Command not complete,1: Command complete" line.long 0xC "INT_STATUS_EN,Interrupt Status Enable" bitfld.long 0xC 28. "DMAESEN,DMA error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 26. "TNESEN,Tuning error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 24. "AC12ESEN,Auto CMD12 error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 22. "DEBESEN,Data end bit error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 21. "DCESEN,Data CRC error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 20. "DTOESEN,Data timeout error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 19. "CIESEN,Command index error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 18. "CEBESEN,Command end bit error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 17. "CCESEN,Command CRC error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 16. "CTOESEN,Command timeout error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 14. "CQISEN,Command queuing status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 13. "TPSEN,Tuning pass status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 12. "RTESEN,Re-tuning event status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 8. "CINTSEN,Card interrupt status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 7. "CRMSEN,Card removal status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 6. "CINSSEN,Card insertion status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 5. "BRRSEN,Buffer read ready status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 4. "BWRSEN,Buffer write ready status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 3. "DINTSEN,DMA interrupt status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 2. "BGESEN,Block gap event status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 1. "TCSEN,Transfer complete status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 0. "CCSEN,Command complete status enable" "0: Masked,1: Enabled" line.long 0x10 "INT_SIGNAL_EN,Interrupt Signal Enable" bitfld.long 0x10 28. "DMAEIEN,DMA error interrupt enable" "0: Masked,1: Enable" newline bitfld.long 0x10 26. "TNEIEN,Tuning error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 24. "AC12EIEN,Auto CMD12 error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 22. "DEBEIEN,Data end bit error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 21. "DCEIEN,Data CRC error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 20. "DTOEIEN,Data timeout error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 19. "CIEIEN,Command index error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 18. "CEBEIEN,Command end bit error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 17. "CCEIEN,Command CRC error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 16. "CTOEIEN,Command timeout error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 14. "CQIIEN,Command queuing signal enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 13. "TPIEN,Tuning pass interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 12. "RTEIEN,Re-tuning event interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 8. "CINTIEN,Card interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 7. "CRMIEN,Card removal interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 6. "CINSIEN,Card insertion interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 5. "BRRIEN,Buffer read ready interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 4. "BWRIEN,Buffer write ready interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 3. "DINTIEN,DMA interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 2. "BGEIEN,Block gap event interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 1. "TCIEN,Transfer complete interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 0. "CCIEN,Command complete interrupt enable" "0: Masked,1: Enabled" line.long 0x14 "AUTOCMD12_ERR_STATUS,Auto CMD12 Error Status" bitfld.long 0x14 23. "SMP_CLK_SEL,Sample clock select" "0: Fixed clock is used to sample data,1: Tuned clock is used to sample data" newline bitfld.long 0x14 22. "EXECUTE_TUNING,Execute tuning" "0: Tuning procedure is aborted,1: Start tuning procedure" newline rbitfld.long 0x14 7. "CNIBAC12E,Command not issued by Auto CMD12 error" "0: No error,1: Not issued" newline rbitfld.long 0x14 4. "AC12IE,Auto CMD12 / 23 index error" "0: No error,1: Error the CMD index in response is not CMD12/23" newline rbitfld.long 0x14 3. "AC12EBE,Auto CMD12 / 23 end bit error" "0: No error,1: End bit error generated" newline rbitfld.long 0x14 2. "AC12CE,Auto CMD12 / 23 CRC error" "0: No CRC error,1: CRC error met in Auto CMD12/23 response" newline rbitfld.long 0x14 1. "AC12TOE,Auto CMD12 / 23 timeout error" "0: No error,1: Time out" newline rbitfld.long 0x14 0. "AC12NE,Auto CMD12 not executed" "0: Executed,1: Not executed" line.long 0x18 "HOST_CTRL_CAP,Host Controller Capabilities" rbitfld.long 0x18 26. "VS18,Voltage support 1.8 V" "0: 1.8 V not supported,1: 1.8 V supported" newline rbitfld.long 0x18 25. "VS30,Voltage support 3.0 V" "0: 3.0 V not supported,1: 3.0 V supported" newline rbitfld.long 0x18 24. "VS33,Voltage support 3.3 V" "0: 3.3 V not supported,1: 3.3 V supported" newline rbitfld.long 0x18 23. "SRS,Suspend / resume support" "0: Not supported,1: Supported" newline rbitfld.long 0x18 22. "DMAS,DMA support" "0: DMA not supported,1: DMA supported" newline rbitfld.long 0x18 21. "HSS,High speed support" "0: High speed not supported,1: High speed supported" newline rbitfld.long 0x18 20. "ADMAS,ADMA support" "0: Advanced DMA not supported,1: Advanced DMA supported" newline rbitfld.long 0x18 16.--18. "MBL,Max block length" "0: 512 bytes,1: 1024 bytes,2: 2048 bytes,3: 4096 bytes,?,?,?,?" newline bitfld.long 0x18 13. "USE_TUNING_SDR50,Use Tuning for SDR50" "0: SDR50 does not support tuning,1: SDR50 supports tuning" newline rbitfld.long 0x18 2. "DDR50_SUPPORT,DDR50 support" "0,1" newline rbitfld.long 0x18 1. "SDR104_SUPPORT,SDR104 support" "0,1" newline rbitfld.long 0x18 0. "SDR50_SUPPORT,SDR50 support" "0,1" line.long 0x1C "WTMK_LVL,Watermark Level" hexmask.long.byte 0x1C 16.--23. 1. "WR_WML,Write watermark level" newline hexmask.long.byte 0x1C 0.--7. 1. "RD_WML,Read watermark level" line.long 0x20 "MIX_CTRL,Mixer Control" bitfld.long 0x20 27. "EN_HS400_MODE,Enable enhance HS400 mode" "0,1" newline bitfld.long 0x20 26. "HS400_MODE,Enable HS400 mode" "0,1" newline bitfld.long 0x20 25. "FBCLK_SEL,Feedback clock source selection (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Feedback clock comes from the loopback CLK,1: Feedback clock comes from the ipp_card_clk_out" newline bitfld.long 0x20 24. "AUTO_TUNE_EN,Auto tuning enable (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Disable auto tuning,1: Enable auto tuning" newline bitfld.long 0x20 23. "SMP_CLK_SEL,Clock selection" "0: Fixed clock is used to sample data / cmd,1: Tuned clock is used to sample data / cmd" newline bitfld.long 0x20 22. "EXE_TUNE,Execute tuning: (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Not tuned or tuning completed,1: Execute tuning" newline bitfld.long 0x20 7. "AC23EN,Auto CMD23 enable" "0,1" newline bitfld.long 0x20 6. "NIBBLE_POS,Nibble position indication" "0,1" newline bitfld.long 0x20 5. "MSBSEL,Multi / Single block select" "0: Single block,1: Multiple blocks" newline bitfld.long 0x20 4. "DTDSEL,Data transfer direction select" "0: Write (Host to card),1: Read (Card to host)" newline bitfld.long 0x20 3. "DDR_EN,Dual data rate mode selection" "0,1" newline bitfld.long 0x20 2. "AC12EN,Auto CMD12 enable" "0: Disable,1: Enable" newline bitfld.long 0x20 1. "BCEN,Block count enable" "0: Disable,1: Enable" newline bitfld.long 0x20 0. "DMAEN,DMA enable" "0: Disable,1: Enable" group.long 0x50++0x3 line.long 0x0 "FORCE_EVENT,Force Event" bitfld.long 0x0 31. "FEVTCINT,Force event card interrupt" "0,1" newline bitfld.long 0x0 28. "FEVTDMAE,Force event DMA error" "0,1" newline bitfld.long 0x0 26. "FEVTTNE,Force tuning error" "0,1" newline bitfld.long 0x0 24. "FEVTAC12E,Force event Auto Command 12 error" "0,1" newline bitfld.long 0x0 22. "FEVTDEBE,Force event data end bit error" "0,1" newline bitfld.long 0x0 21. "FEVTDCE,Force event data CRC error" "0,1" newline bitfld.long 0x0 20. "FEVTDTOE,Force event data time out error" "0,1" newline bitfld.long 0x0 19. "FEVTCIE,Force event command index error" "0,1" newline bitfld.long 0x0 18. "FEVTCEBE,Force event command end bit error" "0,1" newline bitfld.long 0x0 17. "FEVTCCE,Force event command CRC error" "0,1" newline bitfld.long 0x0 16. "FEVTCTOE,Force event command time out error" "0,1" newline bitfld.long 0x0 7. "FEVTCNIBAC12E,Force event command not executed by Auto Command 12 error" "0,1" newline bitfld.long 0x0 4. "FEVTAC12IE,Force event Auto Command 12 index error" "0,1" newline bitfld.long 0x0 3. "FEVTAC12EBE,Force event Auto Command 12 end bit error" "0,1" newline bitfld.long 0x0 2. "FEVTAC12CE,Force event auto command 12 CRC error" "0,1" newline bitfld.long 0x0 1. "FEVTAC12TOE,Force event auto command 12 time out error" "0,1" newline bitfld.long 0x0 0. "FEVTAC12NE,Force event auto command 12 not executed" "0,1" rgroup.long 0x54++0x3 line.long 0x0 "ADMA_ERR_STATUS,ADMA Error Status" bitfld.long 0x0 3. "ADMADCE,ADMA descriptor error" "0: No error,1: Error" newline bitfld.long 0x0 2. "ADMALME,ADMA length mismatch error" "0: No error,1: Error" newline bitfld.long 0x0 0.--1. "ADMAES,ADMA error state (when ADMA error is occurred)" "0,1,2,3" group.long 0x58++0x3 line.long 0x0 "ADMA_SYS_ADDR,ADMA System Address" hexmask.long 0x0 2.--31. 1. "ADS_ADDR,ADMA system address" group.long 0x60++0x3 line.long 0x0 "DLL_CTRL,DLL (Delay Line) Control" hexmask.long.byte 0x0 28.--31. 1. "DLL_CTRL_REF_UPDATE_INT,DLL control loop update interval" newline hexmask.long.byte 0x0 20.--27. 1. "DLL_CTRL_SLV_UPDATE_INT,Slave delay line update interval" newline bitfld.long 0x0 16.--18. "DLL_CTRL_SLV_DLY_TARGET1,DLL slave delay target1" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 9.--15. 1. "DLL_CTRL_SLV_OVERRIDE_VAL,DLL slave override val" newline bitfld.long 0x0 8. "DLL_CTRL_SLV_OVERRIDE,DLL slave override" "0,1" newline bitfld.long 0x0 7. "DLL_CTRL_GATE_UPDATE,DLL gate update" "0,1" newline hexmask.long.byte 0x0 3.--6. 1. "DLL_CTRL_SLV_DLY_TARGET0,DLL slave delay target0" newline bitfld.long 0x0 2. "DLL_CTRL_SLV_FORCE_UPD,DLL slave delay line" "0,1" newline bitfld.long 0x0 1. "DLL_CTRL_RESET,DLL reset" "0,1" newline bitfld.long 0x0 0. "DLL_CTRL_ENABLE,DLL and delay chain" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "DLL_STATUS,DLL Status" hexmask.long.byte 0x0 9.--15. 1. "DLL_STS_REF_SEL,Reference delay line select taps" newline hexmask.long.byte 0x0 2.--8. 1. "DLL_STS_SLV_SEL,Slave delay line select status" newline bitfld.long 0x0 1. "DLL_STS_REF_LOCK,Reference DLL lock status" "0,1" newline bitfld.long 0x0 0. "DLL_STS_SLV_LOCK,Slave delay-line lock status" "0,1" group.long 0x68++0x3 line.long 0x0 "CLK_TUNE_CTRL_STATUS,CLK Tuning Control and Status" rbitfld.long 0x0 31. "PRE_ERR,PRE error" "0,1" newline hexmask.long.byte 0x0 24.--30. 1. "TAP_SEL_PRE,TAP_SEL_PRE" newline hexmask.long.byte 0x0 20.--23. 1. "TAP_SEL_OUT,Delay cells added on the feedback clock between CLK_PRE and CLK_OUT" newline hexmask.long.byte 0x0 16.--19. 1. "TAP_SEL_POST,Delay cells added on the feedback clock between CLK_OUT and CLK_POST" newline rbitfld.long 0x0 15. "NXT_ERR,NXT error" "0,1" newline hexmask.long.byte 0x0 8.--14. 1. "DLY_CELL_SET_PRE,delay cells on the feedback clock between the feedback clock and CLK_PRE" newline hexmask.long.byte 0x0 4.--7. 1. "DLY_CELL_SET_OUT,Delay cells on the feedback clock between CLK_PRE and CLK_OUT" newline hexmask.long.byte 0x0 0.--3. 1. "DLY_CELL_SET_POST,Delay cells on the feedback clock between CLK_OUT and CLK_POST" group.long 0x70++0x3 line.long 0x0 "STROBE_DLL_CTRL,Strobe DLL control" hexmask.long.byte 0x0 28.--31. 1. "STROBE_DLL_CTRL_REF_UPDATE_INT,Strobe DLL control reference update interval" newline hexmask.long.byte 0x0 20.--27. 1. "STROBE_DLL_CTRL_SLV_UPDATE_INT,Strobe DLL control slave update interval" newline hexmask.long.byte 0x0 9.--15. 1. "STROBE_DLL_CTRL_SLV_OVERRIDE_VAL,Strobe DLL control slave Override value" newline bitfld.long 0x0 8. "STROBE_DLL_CTRL_SLV_OVERRIDE,Strobe DLL control slave override" "0,1" newline bitfld.long 0x0 7. "STROBE_DLL_CTRL_GATE_UPDATE,Strobe DLL control gate update" "0,1" newline hexmask.long.byte 0x0 3.--6. 1. "STROBE_DLL_CTRL_SLV_DLY_TARGET,Strobe DLL Control Slave Delay Target" newline bitfld.long 0x0 2. "STROBE_DLL_CTRL_SLV_FORCE_UPD,Strobe DLL control slave force updated" "0,1" newline bitfld.long 0x0 1. "STROBE_DLL_CTRL_RESET,Strobe DLL control reset" "0,1" newline bitfld.long 0x0 0. "STROBE_DLL_CTRL_ENABLE,Strobe DLL control enable" "0,1" rgroup.long 0x74++0x3 line.long 0x0 "STROBE_DLL_STATUS,Strobe DLL status" hexmask.long.byte 0x0 9.--15. 1. "STROBE_DLL_STS_REF_SEL,Strobe DLL status reference select" newline hexmask.long.byte 0x0 2.--8. 1. "STROBE_DLL_STS_SLV_SEL,Strobe DLL status slave select" newline bitfld.long 0x0 1. "STROBE_DLL_STS_REF_LOCK,Strobe DLL status reference lock" "0,1" newline bitfld.long 0x0 0. "STROBE_DLL_STS_SLV_LOCK,Strobe DLL status slave lock" "0,1" group.long 0xC0++0xF line.long 0x0 "VEND_SPEC,Vendor Specific Register" bitfld.long 0x0 31. "CMD_BYTE_EN,Register byte access for CMD_XFR_TYP" "0: Disable. MIX_CTRL[7:0] is read/write and..,1: Enable. MIX_CTRL[7:0] is read-only and.." newline bitfld.long 0x0 15. "CRC_CHK_DIS,CRC Check Disable" "0: Check CRC16 for every read data packet and check..,1: Ignore CRC16 check for every read data packet.." newline bitfld.long 0x0 8. "FRC_SDCLK_ON,Force CLK" "0: CLK active or inactive is fully controlled by..,1: Force CLK active" newline bitfld.long 0x0 3. "AC12_WR_CHKBUSY_EN,Check busy enable" "0: Do not check busy after auto CMD12 for write..,1: Check busy after auto CMD12 for write data packet" newline bitfld.long 0x0 1. "VSELECT,Voltage selection" "0: Change the voltage to high voltage range around..,1: Change the voltage to low voltage range around.." line.long 0x4 "MMC_BOOT,eMMC Boot" hexmask.long.word 0x4 16.--31. 1. "BOOT_BLK_CNT,Stop At Block Gap value of automatic mode" newline bitfld.long 0x4 8. "DISABLE_TIME_OUT,Time out" "0: Enable time out,1: Disable time out" newline bitfld.long 0x4 7. "AUTO_SABG_EN,Auto stop at block gap" "0,1" newline bitfld.long 0x4 6. "BOOT_EN,Boot enable" "0: Fast boot disable,1: Fast boot enable" newline bitfld.long 0x4 5. "BOOT_MODE,Boot mode" "0: Normal boot,1: Alternative boot" newline bitfld.long 0x4 4. "BOOT_ACK,BOOT ACK" "0: No ack,1: Ack" newline hexmask.long.byte 0x4 0.--3. 1. "DTOCV_ACK,DTOCV_ACK" line.long 0x8 "VEND_SPEC2,Vendor Specific 2 Register" hexmask.long.word 0x8 16.--31. 1. "FBCLK_TAP_SEL,Enable extra delay on internal feedback clock" newline bitfld.long 0x8 15. "EN_32K_CLK,Enable 32khz clock for card detection" "0,1" newline bitfld.long 0x8 12. "ACMD23_ARGU2_EN,Argument2 register enable for ACMD23" "0: Disable,1: Argument2 register enable for ACMD23 sharing.." newline bitfld.long 0x8 11. "HS400_RD_CLK_STOP_EN,HS400 read clock stop enable" "0,1" newline bitfld.long 0x8 10. "HS400_WR_CLK_STOP_EN,HS400 write clock stop enable" "0,1" newline bitfld.long 0x8 6. "TUNING_CMD_EN,Tuning command enable" "0: Auto tuning circuit does not check the CMD line.,1: Auto tuning circuit checks the CMD line." newline bitfld.long 0x8 5. "TUNING_1bit_EN,Tuning 1bit enable" "0,1" newline bitfld.long 0x8 4. "TUNING_8bit_EN,Tuning 8bit enable" "0,1" newline bitfld.long 0x8 3. "CARD_INT_D3_TEST,Card interrupt detection test" "0: Check the card interrupt only when DATA3 is high.,1: Check the card interrupt by ignoring the status.." line.long 0xC "TUNING_CTRL,Tuning Control" bitfld.long 0xC 24. "STD_TUNING_EN,Standard tuning circuit and procedure enable" "0,1" newline bitfld.long 0xC 20.--22. "TUNING_WINDOW,Data window" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 16.--18. "TUNING_STEP,TUNING_STEP" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--15. 1. "TUNING_COUNTER,Tuning counter" newline bitfld.long 0xC 7. "DIS_CMD_CHK_FOR_STD_TUNING,Disable command check for standard tuning" "0,1" newline hexmask.long.byte 0xC 0.--6. 1. "TUNING_START_TAP,Tuning start" rgroup.long 0x100++0x3 line.long 0x0 "CQVER,Command Queuing Version" hexmask.long.byte 0x0 8.--11. 1. "MAJOR_VN,eMMC major version number" newline hexmask.long.byte 0x0 4.--7. 1. "MINOR_VN,eMMC minor version number" newline hexmask.long.byte 0x0 0.--3. 1. "VERSION_SUFFIX,eMMC version suffix" group.long 0x104++0x2B line.long 0x0 "CQCAP,Command Queuing Capabilities" hexmask.long.byte 0x0 12.--15. 1. "ITCFMUL,Internal timer clock frequency multiplier" newline hexmask.long.word 0x0 0.--9. 1. "ITCFVAL,Internal timer clock frequency value" line.long 0x4 "CQCFG,Command Queuing Configuration" bitfld.long 0x4 12. "DCMDE,Direct command (DCMD) enable" "0: Task descriptor in slot #31 is a Data Transfer..,1: Task descriptor in slot #31 is a DCMD Task.." newline bitfld.long 0x4 8. "TDS,Task descriptor size" "0: Task descriptor size is 64 bits,1: Task descriptor size is 128 bits" newline bitfld.long 0x4 0. "CQUE,Command queuing enable" "0,1" line.long 0x8 "CQCTL,Command Queuing Control" bitfld.long 0x8 8. "CLEAR,Clear all tasks" "0,1" newline bitfld.long 0x8 0. "HALT,Halt" "0,1" line.long 0xC "CQIS,Command Queuing Interrupt Status" eventfld.long 0xC 3. "TCL,Task cleared" "0,1" newline eventfld.long 0xC 2. "RED,Response error detected interrupt" "0,1" newline eventfld.long 0xC 1. "TCC,Task complete interrupt" "0,1" newline eventfld.long 0xC 0. "HAC,Halt complete interrupt" "0,1" line.long 0x10 "CQISTE,Command Queuing Interrupt Status Enable" bitfld.long 0x10 3. "TCL_STE,Task cleared status enable" "0: CQIS[TCL] is disabled,1: CQIS[TCL] is set when its interrupt condition is.." newline bitfld.long 0x10 2. "RED_STE,Response error detected status enable" "0: CQIS[RED]is disabled,1: CQIS[RED] is set when its interrupt condition is.." newline bitfld.long 0x10 1. "TCC_STE,Task complete status enable" "0: CQIS[TCC] is disabled,1: CQIS[TCC] is set when its interrupt condition is.." newline bitfld.long 0x10 0. "HAC_STE,Halt complete status enable" "0: CQIS[HAC] is disabled,1: CQIS[HAC] is set when its interrupt condition is.." line.long 0x14 "CQISGE,Command Queuing Interrupt Signal Enable" bitfld.long 0x14 3. "TCL_SGE,Task cleared signal enable" "0,1" newline bitfld.long 0x14 2. "RED_SGE,Response error detected signal enable" "0,1" newline bitfld.long 0x14 1. "TCC_SGE,Task complete signal enable" "0,1" newline bitfld.long 0x14 0. "HAC_SGE,Halt complete signal enable" "0,1" line.long 0x18 "CQIC,Command Queuing Interrupt Coalescing" bitfld.long 0x18 31. "ICENDIS,Interrupt coalescing enable/disable" "0,1" newline rbitfld.long 0x18 20. "ICSB,Interrupt coalescing status" "0: No task completions have occurred since last..,1: At least one task completion has been counted.." newline bitfld.long 0x18 16. "ICCTR,Counter and timer reset" "0,1" newline bitfld.long 0x18 15. "ICCTHWEN,Interrupt coalescing counter threshold write enable" "0,1" newline hexmask.long.byte 0x18 8.--12. 1. "ICCTH,Interrupt coalescing counter threshold" newline bitfld.long 0x18 7. "ICTOVALWEN,Interrupt coalescing timeout value write enable" "0,1" newline hexmask.long.byte 0x18 0.--6. 1. "ICTOVAL,Interrupt coalescing timeout value" line.long 0x1C "CQTDLBA,Command Queuing Task Descriptor List Base Address" hexmask.long 0x1C 0.--31. 1. "TDLBA,Task descriptor list base address" line.long 0x20 "CQTDLBAU,Command Queuing Task Descriptor List Base Address Upper 32 Bits" hexmask.long 0x20 0.--31. 1. "TDLBAU,Task descriptor list base address" line.long 0x24 "CQTDBR,Command Queuing Task Doorbell" hexmask.long 0x24 0.--31. 1. "TDBR,Task doorbell" line.long 0x28 "CQTCN,Command Queuing Task Completion Notification" hexmask.long 0x28 0.--31. 1. "TCN,Task complete notification" rgroup.long 0x130++0x7 line.long 0x0 "CQDQS,Command Queuing Device Queue Status" hexmask.long 0x0 0.--31. 1. "DQS,Device queue status" line.long 0x4 "CQDPT,Command Queuing Device Pending Tasks" hexmask.long 0x4 0.--31. 1. "DPT,Device pending tasks" group.long 0x138++0x3 line.long 0x0 "CQTCLR,Command Queuing Task Clear" hexmask.long 0x0 0.--31. 1. "TCLR,Task clear" group.long 0x140++0x7 line.long 0x0 "CQSSC1,Command Queuing Send Status Configuration 1" hexmask.long.byte 0x0 16.--19. 1. "CBC,Send status command block counter" newline hexmask.long.word 0x0 0.--15. 1. "CIT,Send status command idle timer" line.long 0x4 "CQSSC2,Command Queuing Send Status Configuration 2" hexmask.long.word 0x4 0.--15. 1. "SSC2,Send queue status RCA" rgroup.long 0x148++0x3 line.long 0x0 "CQCRDCT,Command Queuing Command Response for Direct-Command Task" hexmask.long 0x0 0.--31. 1. "CRDCT,Direct command last response" group.long 0x150++0x3 line.long 0x0 "CQRMEM,Command Queuing Response Mode Error Mask" hexmask.long 0x0 0.--31. 1. "RMEM,Response mode error mask" rgroup.long 0x154++0xB line.long 0x0 "CQTERRI,Command Queuing Task Error Information" bitfld.long 0x0 31. "DTEFV,Data transfer error fields valid" "0,1" newline hexmask.long.byte 0x0 24.--28. 1. "DTETID,Data transfer error task ID" newline hexmask.long.byte 0x0 16.--21. 1. "DTECI,Data transfer error command index" newline bitfld.long 0x0 15. "RMEFV,Response mode error fields valid" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "RMETID,Response mode error task ID" newline hexmask.long.byte 0x0 0.--5. 1. "RMECI,Response mode error command index" line.long 0x4 "CQCRI,Command Queuing Command Response Index" hexmask.long.byte 0x4 0.--5. 1. "LCMDRI,Last command response index" line.long 0x8 "CQCRA,Command Queuing Command Response Argument" hexmask.long 0x8 0.--31. 1. "LCMDRA,Last command response argument" tree.end tree "USDHC2" base ad:0x42860000 group.long 0x0++0xF line.long 0x0 "DS_ADDR,DMA System Address" hexmask.long 0x0 0.--31. 1. "DS_ADDR,System address" line.long 0x4 "BLK_ATT,Block Attributes" hexmask.long.word 0x4 16.--31. 1. "BLKCNT,Blocks count for current transfer" newline hexmask.long.word 0x4 0.--12. 1. "BLKSIZE,Transfer block size" line.long 0x8 "CMD_ARG,Command Argument" hexmask.long 0x8 0.--31. 1. "CMDARG,Command argument" line.long 0xC "CMD_XFR_TYP,Command Transfer Type" hexmask.long.byte 0xC 24.--29. 1. "CMDINX,Command index" newline bitfld.long 0xC 22.--23. "CMDTYP,Command type" "0: Normal other commands,1: Suspend CMD52 for writing bus suspend in CCCR,2: Resume CMD52 for writing function select in CCCR,3: Abort CMD12 CMD52 for writing I/O Abort in CCCR" newline bitfld.long 0xC 21. "DPSEL,Data present select" "0: No data present,1: Data present" newline bitfld.long 0xC 20. "CICEN,Command index check enable" "0: Disable command index check,1: Enables command index check" newline bitfld.long 0xC 19. "CCCEN,Command CRC check enable" "0: Disables command CRC check,1: Enables command CRC check" newline bitfld.long 0xC 16.--17. "RSPTYP,Response type select" "0: No response,1: Response length 136,2: Response length 48,3: Response length 48 check busy after response" newline bitfld.long 0xC 7. "AC23EN,AC23EN" "0: Disable,1: Enable" newline bitfld.long 0xC 6. "NIBBLE_POS,NIBBLE_POS" "0: Disable,1: Enable" newline bitfld.long 0xC 5. "MSBSEL,MSBSEL" "0: Disable,1: Enable" newline bitfld.long 0xC 4. "DTDSEL,DTDSEL" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "DDR_EN,DDR_EN" "0: Disable,1: Enable" newline bitfld.long 0xC 2. "AC12EN,AC12EN" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "BCEN,BCEN" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "DMAEN,DMAEN" "0: Disable,1: Enable" rgroup.long 0x10++0xF line.long 0x0 "CMD_RSP0,Command Response0" hexmask.long 0x0 0.--31. 1. "CMDRSP0,Command response 0" line.long 0x4 "CMD_RSP1,Command Response1" hexmask.long 0x4 0.--31. 1. "CMDRSP1,Command response 1" line.long 0x8 "CMD_RSP2,Command Response2" hexmask.long 0x8 0.--31. 1. "CMDRSP2,Command response 2" line.long 0xC "CMD_RSP3,Command Response3" hexmask.long 0xC 0.--31. 1. "CMDRSP3,Command response 3" group.long 0x20++0x3 line.long 0x0 "DATA_BUFF_ACC_PORT,Data Buffer Access Port" hexmask.long 0x0 0.--31. 1. "DATCONT,Data content" rgroup.long 0x24++0x3 line.long 0x0 "PRES_STATE,Present State" hexmask.long.byte 0x0 24.--31. 1. "DLSL,DATA[7:0] line signal level" newline bitfld.long 0x0 23. "CLSL,CMD line signal level" "0,1" newline bitfld.long 0x0 19. "WPSPL,Write protect switch pin level" "0: Write protected (WP = 1),1: Write enabled (WP = 0)" newline bitfld.long 0x0 18. "CDPL,Card detect pin level" "0: No card present (CD_B = 1),1: Card present (CD_B = 0)" newline bitfld.long 0x0 16. "CINST,Card inserted" "0: Power on reset or no card,1: Card inserted" newline bitfld.long 0x0 15. "TSCD,Tap select change done" "0: Delay cell select change is not finished.,1: Delay cell select change is finished." newline bitfld.long 0x0 12. "RTR,Re-Tuning Request (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Fixed or well tuned sampling clock,1: Sampling clock needs re-tuning" newline bitfld.long 0x0 11. "BREN,Buffer read enable" "0: Read disable,1: Read enable" newline bitfld.long 0x0 10. "BWEN,Buffer write enable" "0: Write disable,1: Write enable" newline bitfld.long 0x0 9. "RTA,Read transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x0 8. "WTA,Write transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x0 3. "SDSTB,SD clock stable" "0: Clock is changing frequency and not stable.,1: Clock is stable." newline bitfld.long 0x0 2. "DLA,Data line active" "0: DATA line inactive,1: DATA line active" newline bitfld.long 0x0 1. "CDIHB,Command Inhibit Data (DATA)" "0: Can issue command that uses the DATA line,1: Cannot issue command that uses the DATA line" newline bitfld.long 0x0 0. "CIHB,Command inhibit (CMD)" "0: Can issue command using only CMD line,1: Cannot issue command" group.long 0x28++0x23 line.long 0x0 "PROT_CTRL,Protocol Control" bitfld.long 0x0 30. "NON_EXACT_BLK_RD,Non-exact block read" "0: The block read is exact block read. Host driver..,1: The block read is non-exact block read. Host.." newline bitfld.long 0x0 26. "WECRM,Wakeup event enable on SD card removal" "0: Disables wakeup event enable on SD card removal,1: Enables wakeup event enable on SD card removal" newline bitfld.long 0x0 25. "WECINS,Wakeup event enable on SD card insertion" "0: Disable wakeup event enable on SD card insertion,1: Enable wakeup event enable on SD card insertion" newline bitfld.long 0x0 24. "WECINT,Wakeup event enable on card interrupt" "0: Disables wakeup event enable on card interrupt,1: Enables wakeup event enable on card interrupt" newline bitfld.long 0x0 20. "RD_DONE_NO_8CLK,Read performed number 8 clock" "0,1" newline bitfld.long 0x0 19. "IABG,Interrupt at block gap" "0: Disables interrupt at block gap,1: Enables interrupt at block gap" newline bitfld.long 0x0 18. "RWCTL,Read wait control" "0: Disables read wait control and stop SD clock at..,1: Enables read wait control and assert read wait.." newline bitfld.long 0x0 17. "CREQ,Continue request" "0: No effect,1: Restart" newline bitfld.long 0x0 16. "SABGREQ,Stop at block gap request" "0: Transfer,1: Stop" newline bitfld.long 0x0 8.--9. "DMASEL,DMA select" "0: No DMA or simple DMA is selected.,1: ADMA1 is selected.,2: ADMA2 is selected.,?" newline bitfld.long 0x0 7. "CDSS,Card detect signal selection" "0: Card detection level is selected (for normal..,1: Card detection test level is selected (for test.." newline bitfld.long 0x0 6. "CDTL,Card detect test level" "0: Card detect test level is 0 no card inserted,1: Card detect test level is 1 card inserted" newline bitfld.long 0x0 4.--5. "EMODE,Endian mode" "0: Big endian mode,1: Half word big endian mode,2: Little endian mode,?" newline bitfld.long 0x0 3. "D3CD,DATA3 as card detection pin" "0: DATA3 does not monitor card insertion,1: DATA3 as card detection pin" newline bitfld.long 0x0 1.--2. "DTW,Data transfer width" "0: 1-bit mode,1: 4-bit mode,2: 8-bit mode,?" line.long 0x4 "SYS_CTRL,System Control" bitfld.long 0x4 28. "RSTT,Reset tuning" "0,1" newline bitfld.long 0x4 27. "INITA,Initialization active" "0,1" newline bitfld.long 0x4 26. "RSTD,Software reset for data line" "0: No reset,1: Reset" newline bitfld.long 0x4 25. "RSTC,Software reset for CMD line" "0: No reset,1: Reset" newline bitfld.long 0x4 24. "RSTA,Software reset for all" "0: No reset,1: Reset" newline bitfld.long 0x4 23. "IPP_RST_N,Hardware reset" "0,1" newline hexmask.long.byte 0x4 16.--19. 1. "DTOCV,Data timeout counter value" newline hexmask.long.byte 0x4 8.--15. 1. "SDCLKFS,SDCLK frequency select" newline hexmask.long.byte 0x4 4.--7. 1. "DVS,Divisor" line.long 0x8 "INT_STATUS,Interrupt Status" eventfld.long 0x8 28. "DMAE,DMA error" "0: No error,1: Error" newline eventfld.long 0x8 26. "TNE,Tuning error: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x8 24. "AC12E,Auto CMD12 error" "0: No error,1: Error" newline eventfld.long 0x8 22. "DEBE,Data end bit error" "0: No error,1: Error" newline eventfld.long 0x8 21. "DCE,Data CRC error" "0: No error,1: Error" newline eventfld.long 0x8 20. "DTOE,Data timeout error" "0: No error,1: Time out" newline eventfld.long 0x8 19. "CIE,Command index error" "0: No error,1: Error" newline eventfld.long 0x8 18. "CEBE,Command end bit error" "0: No error,1: End bit error generated" newline eventfld.long 0x8 17. "CCE,Command CRC error" "0: No error,1: CRC error generated" newline eventfld.long 0x8 16. "CTOE,Command timeout error" "0: No error,1: Time out" newline rbitfld.long 0x8 15. "ERR_INT_STATUS,Error Interrupt Status" "0,1" newline eventfld.long 0x8 14. "CQI,Command queuing interrupt" "0,1" newline eventfld.long 0x8 13. "TP,Tuning pass:(only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x8 12. "RTE,Re-tuning event: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Re-tuning is not required.,1: Re-tuning should be performed." newline eventfld.long 0x8 8. "CINT,Card interrupt" "0: No card interrupt,1: Generate card interrupt" newline eventfld.long 0x8 7. "CRM,Card removal" "0: Card state unstable or inserted,1: Card removed" newline eventfld.long 0x8 6. "CINS,Card insertion" "0: Card state unstable or removed,1: Card inserted" newline eventfld.long 0x8 5. "BRR,Buffer read ready" "0: Not ready to read buffer,1: Ready to read buffer" newline eventfld.long 0x8 4. "BWR,Buffer write ready" "0: Not ready to write buffer,1: Ready to write buffer" newline eventfld.long 0x8 3. "DINT,DMA interrupt" "0: No DMA interrupt,1: DMA interrupt is generated." newline eventfld.long 0x8 2. "BGE,Block gap event" "0: No block gap event,1: Transaction stopped at block gap" newline eventfld.long 0x8 1. "TC,Transfer complete" "0: Transfer does not complete,1: Transfer complete" newline eventfld.long 0x8 0. "CC,Command complete" "0: Command not complete,1: Command complete" line.long 0xC "INT_STATUS_EN,Interrupt Status Enable" bitfld.long 0xC 28. "DMAESEN,DMA error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 26. "TNESEN,Tuning error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 24. "AC12ESEN,Auto CMD12 error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 22. "DEBESEN,Data end bit error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 21. "DCESEN,Data CRC error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 20. "DTOESEN,Data timeout error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 19. "CIESEN,Command index error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 18. "CEBESEN,Command end bit error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 17. "CCESEN,Command CRC error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 16. "CTOESEN,Command timeout error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 14. "CQISEN,Command queuing status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 13. "TPSEN,Tuning pass status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 12. "RTESEN,Re-tuning event status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 8. "CINTSEN,Card interrupt status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 7. "CRMSEN,Card removal status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 6. "CINSSEN,Card insertion status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 5. "BRRSEN,Buffer read ready status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 4. "BWRSEN,Buffer write ready status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 3. "DINTSEN,DMA interrupt status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 2. "BGESEN,Block gap event status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 1. "TCSEN,Transfer complete status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 0. "CCSEN,Command complete status enable" "0: Masked,1: Enabled" line.long 0x10 "INT_SIGNAL_EN,Interrupt Signal Enable" bitfld.long 0x10 28. "DMAEIEN,DMA error interrupt enable" "0: Masked,1: Enable" newline bitfld.long 0x10 26. "TNEIEN,Tuning error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 24. "AC12EIEN,Auto CMD12 error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 22. "DEBEIEN,Data end bit error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 21. "DCEIEN,Data CRC error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 20. "DTOEIEN,Data timeout error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 19. "CIEIEN,Command index error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 18. "CEBEIEN,Command end bit error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 17. "CCEIEN,Command CRC error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 16. "CTOEIEN,Command timeout error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 14. "CQIIEN,Command queuing signal enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 13. "TPIEN,Tuning pass interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 12. "RTEIEN,Re-tuning event interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 8. "CINTIEN,Card interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 7. "CRMIEN,Card removal interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 6. "CINSIEN,Card insertion interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 5. "BRRIEN,Buffer read ready interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 4. "BWRIEN,Buffer write ready interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 3. "DINTIEN,DMA interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 2. "BGEIEN,Block gap event interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 1. "TCIEN,Transfer complete interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 0. "CCIEN,Command complete interrupt enable" "0: Masked,1: Enabled" line.long 0x14 "AUTOCMD12_ERR_STATUS,Auto CMD12 Error Status" bitfld.long 0x14 23. "SMP_CLK_SEL,Sample clock select" "0: Fixed clock is used to sample data,1: Tuned clock is used to sample data" newline bitfld.long 0x14 22. "EXECUTE_TUNING,Execute tuning" "0: Tuning procedure is aborted,1: Start tuning procedure" newline rbitfld.long 0x14 7. "CNIBAC12E,Command not issued by Auto CMD12 error" "0: No error,1: Not issued" newline rbitfld.long 0x14 4. "AC12IE,Auto CMD12 / 23 index error" "0: No error,1: Error the CMD index in response is not CMD12/23" newline rbitfld.long 0x14 3. "AC12EBE,Auto CMD12 / 23 end bit error" "0: No error,1: End bit error generated" newline rbitfld.long 0x14 2. "AC12CE,Auto CMD12 / 23 CRC error" "0: No CRC error,1: CRC error met in Auto CMD12/23 response" newline rbitfld.long 0x14 1. "AC12TOE,Auto CMD12 / 23 timeout error" "0: No error,1: Time out" newline rbitfld.long 0x14 0. "AC12NE,Auto CMD12 not executed" "0: Executed,1: Not executed" line.long 0x18 "HOST_CTRL_CAP,Host Controller Capabilities" rbitfld.long 0x18 26. "VS18,Voltage support 1.8 V" "0: 1.8 V not supported,1: 1.8 V supported" newline rbitfld.long 0x18 25. "VS30,Voltage support 3.0 V" "0: 3.0 V not supported,1: 3.0 V supported" newline rbitfld.long 0x18 24. "VS33,Voltage support 3.3 V" "0: 3.3 V not supported,1: 3.3 V supported" newline rbitfld.long 0x18 23. "SRS,Suspend / resume support" "0: Not supported,1: Supported" newline rbitfld.long 0x18 22. "DMAS,DMA support" "0: DMA not supported,1: DMA supported" newline rbitfld.long 0x18 21. "HSS,High speed support" "0: High speed not supported,1: High speed supported" newline rbitfld.long 0x18 20. "ADMAS,ADMA support" "0: Advanced DMA not supported,1: Advanced DMA supported" newline rbitfld.long 0x18 16.--18. "MBL,Max block length" "0: 512 bytes,1: 1024 bytes,2: 2048 bytes,3: 4096 bytes,?,?,?,?" newline bitfld.long 0x18 13. "USE_TUNING_SDR50,Use Tuning for SDR50" "0: SDR50 does not support tuning,1: SDR50 supports tuning" newline rbitfld.long 0x18 2. "DDR50_SUPPORT,DDR50 support" "0,1" newline rbitfld.long 0x18 1. "SDR104_SUPPORT,SDR104 support" "0,1" newline rbitfld.long 0x18 0. "SDR50_SUPPORT,SDR50 support" "0,1" line.long 0x1C "WTMK_LVL,Watermark Level" hexmask.long.byte 0x1C 16.--23. 1. "WR_WML,Write watermark level" newline hexmask.long.byte 0x1C 0.--7. 1. "RD_WML,Read watermark level" line.long 0x20 "MIX_CTRL,Mixer Control" bitfld.long 0x20 27. "EN_HS400_MODE,Enable enhance HS400 mode" "0,1" newline bitfld.long 0x20 26. "HS400_MODE,Enable HS400 mode" "0,1" newline bitfld.long 0x20 25. "FBCLK_SEL,Feedback clock source selection (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Feedback clock comes from the loopback CLK,1: Feedback clock comes from the ipp_card_clk_out" newline bitfld.long 0x20 24. "AUTO_TUNE_EN,Auto tuning enable (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Disable auto tuning,1: Enable auto tuning" newline bitfld.long 0x20 23. "SMP_CLK_SEL,Clock selection" "0: Fixed clock is used to sample data / cmd,1: Tuned clock is used to sample data / cmd" newline bitfld.long 0x20 22. "EXE_TUNE,Execute tuning: (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Not tuned or tuning completed,1: Execute tuning" newline bitfld.long 0x20 7. "AC23EN,Auto CMD23 enable" "0,1" newline bitfld.long 0x20 6. "NIBBLE_POS,Nibble position indication" "0,1" newline bitfld.long 0x20 5. "MSBSEL,Multi / Single block select" "0: Single block,1: Multiple blocks" newline bitfld.long 0x20 4. "DTDSEL,Data transfer direction select" "0: Write (Host to card),1: Read (Card to host)" newline bitfld.long 0x20 3. "DDR_EN,Dual data rate mode selection" "0,1" newline bitfld.long 0x20 2. "AC12EN,Auto CMD12 enable" "0: Disable,1: Enable" newline bitfld.long 0x20 1. "BCEN,Block count enable" "0: Disable,1: Enable" newline bitfld.long 0x20 0. "DMAEN,DMA enable" "0: Disable,1: Enable" group.long 0x50++0x3 line.long 0x0 "FORCE_EVENT,Force Event" bitfld.long 0x0 31. "FEVTCINT,Force event card interrupt" "0,1" newline bitfld.long 0x0 28. "FEVTDMAE,Force event DMA error" "0,1" newline bitfld.long 0x0 26. "FEVTTNE,Force tuning error" "0,1" newline bitfld.long 0x0 24. "FEVTAC12E,Force event Auto Command 12 error" "0,1" newline bitfld.long 0x0 22. "FEVTDEBE,Force event data end bit error" "0,1" newline bitfld.long 0x0 21. "FEVTDCE,Force event data CRC error" "0,1" newline bitfld.long 0x0 20. "FEVTDTOE,Force event data time out error" "0,1" newline bitfld.long 0x0 19. "FEVTCIE,Force event command index error" "0,1" newline bitfld.long 0x0 18. "FEVTCEBE,Force event command end bit error" "0,1" newline bitfld.long 0x0 17. "FEVTCCE,Force event command CRC error" "0,1" newline bitfld.long 0x0 16. "FEVTCTOE,Force event command time out error" "0,1" newline bitfld.long 0x0 7. "FEVTCNIBAC12E,Force event command not executed by Auto Command 12 error" "0,1" newline bitfld.long 0x0 4. "FEVTAC12IE,Force event Auto Command 12 index error" "0,1" newline bitfld.long 0x0 3. "FEVTAC12EBE,Force event Auto Command 12 end bit error" "0,1" newline bitfld.long 0x0 2. "FEVTAC12CE,Force event auto command 12 CRC error" "0,1" newline bitfld.long 0x0 1. "FEVTAC12TOE,Force event auto command 12 time out error" "0,1" newline bitfld.long 0x0 0. "FEVTAC12NE,Force event auto command 12 not executed" "0,1" rgroup.long 0x54++0x3 line.long 0x0 "ADMA_ERR_STATUS,ADMA Error Status" bitfld.long 0x0 3. "ADMADCE,ADMA descriptor error" "0: No error,1: Error" newline bitfld.long 0x0 2. "ADMALME,ADMA length mismatch error" "0: No error,1: Error" newline bitfld.long 0x0 0.--1. "ADMAES,ADMA error state (when ADMA error is occurred)" "0,1,2,3" group.long 0x58++0x3 line.long 0x0 "ADMA_SYS_ADDR,ADMA System Address" hexmask.long 0x0 2.--31. 1. "ADS_ADDR,ADMA system address" group.long 0x60++0x3 line.long 0x0 "DLL_CTRL,DLL (Delay Line) Control" hexmask.long.byte 0x0 28.--31. 1. "DLL_CTRL_REF_UPDATE_INT,DLL control loop update interval" newline hexmask.long.byte 0x0 20.--27. 1. "DLL_CTRL_SLV_UPDATE_INT,Slave delay line update interval" newline bitfld.long 0x0 16.--18. "DLL_CTRL_SLV_DLY_TARGET1,DLL slave delay target1" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 9.--15. 1. "DLL_CTRL_SLV_OVERRIDE_VAL,DLL slave override val" newline bitfld.long 0x0 8. "DLL_CTRL_SLV_OVERRIDE,DLL slave override" "0,1" newline bitfld.long 0x0 7. "DLL_CTRL_GATE_UPDATE,DLL gate update" "0,1" newline hexmask.long.byte 0x0 3.--6. 1. "DLL_CTRL_SLV_DLY_TARGET0,DLL slave delay target0" newline bitfld.long 0x0 2. "DLL_CTRL_SLV_FORCE_UPD,DLL slave delay line" "0,1" newline bitfld.long 0x0 1. "DLL_CTRL_RESET,DLL reset" "0,1" newline bitfld.long 0x0 0. "DLL_CTRL_ENABLE,DLL and delay chain" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "DLL_STATUS,DLL Status" hexmask.long.byte 0x0 9.--15. 1. "DLL_STS_REF_SEL,Reference delay line select taps" newline hexmask.long.byte 0x0 2.--8. 1. "DLL_STS_SLV_SEL,Slave delay line select status" newline bitfld.long 0x0 1. "DLL_STS_REF_LOCK,Reference DLL lock status" "0,1" newline bitfld.long 0x0 0. "DLL_STS_SLV_LOCK,Slave delay-line lock status" "0,1" group.long 0x68++0x3 line.long 0x0 "CLK_TUNE_CTRL_STATUS,CLK Tuning Control and Status" rbitfld.long 0x0 31. "PRE_ERR,PRE error" "0,1" newline hexmask.long.byte 0x0 24.--30. 1. "TAP_SEL_PRE,TAP_SEL_PRE" newline hexmask.long.byte 0x0 20.--23. 1. "TAP_SEL_OUT,Delay cells added on the feedback clock between CLK_PRE and CLK_OUT" newline hexmask.long.byte 0x0 16.--19. 1. "TAP_SEL_POST,Delay cells added on the feedback clock between CLK_OUT and CLK_POST" newline rbitfld.long 0x0 15. "NXT_ERR,NXT error" "0,1" newline hexmask.long.byte 0x0 8.--14. 1. "DLY_CELL_SET_PRE,delay cells on the feedback clock between the feedback clock and CLK_PRE" newline hexmask.long.byte 0x0 4.--7. 1. "DLY_CELL_SET_OUT,Delay cells on the feedback clock between CLK_PRE and CLK_OUT" newline hexmask.long.byte 0x0 0.--3. 1. "DLY_CELL_SET_POST,Delay cells on the feedback clock between CLK_OUT and CLK_POST" group.long 0x70++0x3 line.long 0x0 "STROBE_DLL_CTRL,Strobe DLL control" hexmask.long.byte 0x0 28.--31. 1. "STROBE_DLL_CTRL_REF_UPDATE_INT,Strobe DLL control reference update interval" newline hexmask.long.byte 0x0 20.--27. 1. "STROBE_DLL_CTRL_SLV_UPDATE_INT,Strobe DLL control slave update interval" newline hexmask.long.byte 0x0 9.--15. 1. "STROBE_DLL_CTRL_SLV_OVERRIDE_VAL,Strobe DLL control slave Override value" newline bitfld.long 0x0 8. "STROBE_DLL_CTRL_SLV_OVERRIDE,Strobe DLL control slave override" "0,1" newline bitfld.long 0x0 7. "STROBE_DLL_CTRL_GATE_UPDATE,Strobe DLL control gate update" "0,1" newline hexmask.long.byte 0x0 3.--6. 1. "STROBE_DLL_CTRL_SLV_DLY_TARGET,Strobe DLL Control Slave Delay Target" newline bitfld.long 0x0 2. "STROBE_DLL_CTRL_SLV_FORCE_UPD,Strobe DLL control slave force updated" "0,1" newline bitfld.long 0x0 1. "STROBE_DLL_CTRL_RESET,Strobe DLL control reset" "0,1" newline bitfld.long 0x0 0. "STROBE_DLL_CTRL_ENABLE,Strobe DLL control enable" "0,1" rgroup.long 0x74++0x3 line.long 0x0 "STROBE_DLL_STATUS,Strobe DLL status" hexmask.long.byte 0x0 9.--15. 1. "STROBE_DLL_STS_REF_SEL,Strobe DLL status reference select" newline hexmask.long.byte 0x0 2.--8. 1. "STROBE_DLL_STS_SLV_SEL,Strobe DLL status slave select" newline bitfld.long 0x0 1. "STROBE_DLL_STS_REF_LOCK,Strobe DLL status reference lock" "0,1" newline bitfld.long 0x0 0. "STROBE_DLL_STS_SLV_LOCK,Strobe DLL status slave lock" "0,1" group.long 0xC0++0xF line.long 0x0 "VEND_SPEC,Vendor Specific Register" bitfld.long 0x0 31. "CMD_BYTE_EN,Register byte access for CMD_XFR_TYP" "0: Disable. MIX_CTRL[7:0] is read/write and..,1: Enable. MIX_CTRL[7:0] is read-only and.." newline bitfld.long 0x0 15. "CRC_CHK_DIS,CRC Check Disable" "0: Check CRC16 for every read data packet and check..,1: Ignore CRC16 check for every read data packet.." newline bitfld.long 0x0 8. "FRC_SDCLK_ON,Force CLK" "0: CLK active or inactive is fully controlled by..,1: Force CLK active" newline bitfld.long 0x0 3. "AC12_WR_CHKBUSY_EN,Check busy enable" "0: Do not check busy after auto CMD12 for write..,1: Check busy after auto CMD12 for write data packet" newline bitfld.long 0x0 1. "VSELECT,Voltage selection" "0: Change the voltage to high voltage range around..,1: Change the voltage to low voltage range around.." line.long 0x4 "MMC_BOOT,eMMC Boot" hexmask.long.word 0x4 16.--31. 1. "BOOT_BLK_CNT,Stop At Block Gap value of automatic mode" newline bitfld.long 0x4 8. "DISABLE_TIME_OUT,Time out" "0: Enable time out,1: Disable time out" newline bitfld.long 0x4 7. "AUTO_SABG_EN,Auto stop at block gap" "0,1" newline bitfld.long 0x4 6. "BOOT_EN,Boot enable" "0: Fast boot disable,1: Fast boot enable" newline bitfld.long 0x4 5. "BOOT_MODE,Boot mode" "0: Normal boot,1: Alternative boot" newline bitfld.long 0x4 4. "BOOT_ACK,BOOT ACK" "0: No ack,1: Ack" newline hexmask.long.byte 0x4 0.--3. 1. "DTOCV_ACK,DTOCV_ACK" line.long 0x8 "VEND_SPEC2,Vendor Specific 2 Register" hexmask.long.word 0x8 16.--31. 1. "FBCLK_TAP_SEL,Enable extra delay on internal feedback clock" newline bitfld.long 0x8 15. "EN_32K_CLK,Enable 32khz clock for card detection" "0,1" newline bitfld.long 0x8 12. "ACMD23_ARGU2_EN,Argument2 register enable for ACMD23" "0: Disable,1: Argument2 register enable for ACMD23 sharing.." newline bitfld.long 0x8 11. "HS400_RD_CLK_STOP_EN,HS400 read clock stop enable" "0,1" newline bitfld.long 0x8 10. "HS400_WR_CLK_STOP_EN,HS400 write clock stop enable" "0,1" newline bitfld.long 0x8 6. "TUNING_CMD_EN,Tuning command enable" "0: Auto tuning circuit does not check the CMD line.,1: Auto tuning circuit checks the CMD line." newline bitfld.long 0x8 5. "TUNING_1bit_EN,Tuning 1bit enable" "0,1" newline bitfld.long 0x8 4. "TUNING_8bit_EN,Tuning 8bit enable" "0,1" newline bitfld.long 0x8 3. "CARD_INT_D3_TEST,Card interrupt detection test" "0: Check the card interrupt only when DATA3 is high.,1: Check the card interrupt by ignoring the status.." line.long 0xC "TUNING_CTRL,Tuning Control" bitfld.long 0xC 24. "STD_TUNING_EN,Standard tuning circuit and procedure enable" "0,1" newline bitfld.long 0xC 20.--22. "TUNING_WINDOW,Data window" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 16.--18. "TUNING_STEP,TUNING_STEP" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--15. 1. "TUNING_COUNTER,Tuning counter" newline bitfld.long 0xC 7. "DIS_CMD_CHK_FOR_STD_TUNING,Disable command check for standard tuning" "0,1" newline hexmask.long.byte 0xC 0.--6. 1. "TUNING_START_TAP,Tuning start" rgroup.long 0x100++0x3 line.long 0x0 "CQVER,Command Queuing Version" hexmask.long.byte 0x0 8.--11. 1. "MAJOR_VN,eMMC major version number" newline hexmask.long.byte 0x0 4.--7. 1. "MINOR_VN,eMMC minor version number" newline hexmask.long.byte 0x0 0.--3. 1. "VERSION_SUFFIX,eMMC version suffix" group.long 0x104++0x2B line.long 0x0 "CQCAP,Command Queuing Capabilities" hexmask.long.byte 0x0 12.--15. 1. "ITCFMUL,Internal timer clock frequency multiplier" newline hexmask.long.word 0x0 0.--9. 1. "ITCFVAL,Internal timer clock frequency value" line.long 0x4 "CQCFG,Command Queuing Configuration" bitfld.long 0x4 12. "DCMDE,Direct command (DCMD) enable" "0: Task descriptor in slot #31 is a Data Transfer..,1: Task descriptor in slot #31 is a DCMD Task.." newline bitfld.long 0x4 8. "TDS,Task descriptor size" "0: Task descriptor size is 64 bits,1: Task descriptor size is 128 bits" newline bitfld.long 0x4 0. "CQUE,Command queuing enable" "0,1" line.long 0x8 "CQCTL,Command Queuing Control" bitfld.long 0x8 8. "CLEAR,Clear all tasks" "0,1" newline bitfld.long 0x8 0. "HALT,Halt" "0,1" line.long 0xC "CQIS,Command Queuing Interrupt Status" eventfld.long 0xC 3. "TCL,Task cleared" "0,1" newline eventfld.long 0xC 2. "RED,Response error detected interrupt" "0,1" newline eventfld.long 0xC 1. "TCC,Task complete interrupt" "0,1" newline eventfld.long 0xC 0. "HAC,Halt complete interrupt" "0,1" line.long 0x10 "CQISTE,Command Queuing Interrupt Status Enable" bitfld.long 0x10 3. "TCL_STE,Task cleared status enable" "0: CQIS[TCL] is disabled,1: CQIS[TCL] is set when its interrupt condition is.." newline bitfld.long 0x10 2. "RED_STE,Response error detected status enable" "0: CQIS[RED]is disabled,1: CQIS[RED] is set when its interrupt condition is.." newline bitfld.long 0x10 1. "TCC_STE,Task complete status enable" "0: CQIS[TCC] is disabled,1: CQIS[TCC] is set when its interrupt condition is.." newline bitfld.long 0x10 0. "HAC_STE,Halt complete status enable" "0: CQIS[HAC] is disabled,1: CQIS[HAC] is set when its interrupt condition is.." line.long 0x14 "CQISGE,Command Queuing Interrupt Signal Enable" bitfld.long 0x14 3. "TCL_SGE,Task cleared signal enable" "0,1" newline bitfld.long 0x14 2. "RED_SGE,Response error detected signal enable" "0,1" newline bitfld.long 0x14 1. "TCC_SGE,Task complete signal enable" "0,1" newline bitfld.long 0x14 0. "HAC_SGE,Halt complete signal enable" "0,1" line.long 0x18 "CQIC,Command Queuing Interrupt Coalescing" bitfld.long 0x18 31. "ICENDIS,Interrupt coalescing enable/disable" "0,1" newline rbitfld.long 0x18 20. "ICSB,Interrupt coalescing status" "0: No task completions have occurred since last..,1: At least one task completion has been counted.." newline bitfld.long 0x18 16. "ICCTR,Counter and timer reset" "0,1" newline bitfld.long 0x18 15. "ICCTHWEN,Interrupt coalescing counter threshold write enable" "0,1" newline hexmask.long.byte 0x18 8.--12. 1. "ICCTH,Interrupt coalescing counter threshold" newline bitfld.long 0x18 7. "ICTOVALWEN,Interrupt coalescing timeout value write enable" "0,1" newline hexmask.long.byte 0x18 0.--6. 1. "ICTOVAL,Interrupt coalescing timeout value" line.long 0x1C "CQTDLBA,Command Queuing Task Descriptor List Base Address" hexmask.long 0x1C 0.--31. 1. "TDLBA,Task descriptor list base address" line.long 0x20 "CQTDLBAU,Command Queuing Task Descriptor List Base Address Upper 32 Bits" hexmask.long 0x20 0.--31. 1. "TDLBAU,Task descriptor list base address" line.long 0x24 "CQTDBR,Command Queuing Task Doorbell" hexmask.long 0x24 0.--31. 1. "TDBR,Task doorbell" line.long 0x28 "CQTCN,Command Queuing Task Completion Notification" hexmask.long 0x28 0.--31. 1. "TCN,Task complete notification" rgroup.long 0x130++0x7 line.long 0x0 "CQDQS,Command Queuing Device Queue Status" hexmask.long 0x0 0.--31. 1. "DQS,Device queue status" line.long 0x4 "CQDPT,Command Queuing Device Pending Tasks" hexmask.long 0x4 0.--31. 1. "DPT,Device pending tasks" group.long 0x138++0x3 line.long 0x0 "CQTCLR,Command Queuing Task Clear" hexmask.long 0x0 0.--31. 1. "TCLR,Task clear" group.long 0x140++0x7 line.long 0x0 "CQSSC1,Command Queuing Send Status Configuration 1" hexmask.long.byte 0x0 16.--19. 1. "CBC,Send status command block counter" newline hexmask.long.word 0x0 0.--15. 1. "CIT,Send status command idle timer" line.long 0x4 "CQSSC2,Command Queuing Send Status Configuration 2" hexmask.long.word 0x4 0.--15. 1. "SSC2,Send queue status RCA" rgroup.long 0x148++0x3 line.long 0x0 "CQCRDCT,Command Queuing Command Response for Direct-Command Task" hexmask.long 0x0 0.--31. 1. "CRDCT,Direct command last response" group.long 0x150++0x3 line.long 0x0 "CQRMEM,Command Queuing Response Mode Error Mask" hexmask.long 0x0 0.--31. 1. "RMEM,Response mode error mask" rgroup.long 0x154++0xB line.long 0x0 "CQTERRI,Command Queuing Task Error Information" bitfld.long 0x0 31. "DTEFV,Data transfer error fields valid" "0,1" newline hexmask.long.byte 0x0 24.--28. 1. "DTETID,Data transfer error task ID" newline hexmask.long.byte 0x0 16.--21. 1. "DTECI,Data transfer error command index" newline bitfld.long 0x0 15. "RMEFV,Response mode error fields valid" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "RMETID,Response mode error task ID" newline hexmask.long.byte 0x0 0.--5. 1. "RMECI,Response mode error command index" line.long 0x4 "CQCRI,Command Queuing Command Response Index" hexmask.long.byte 0x4 0.--5. 1. "LCMDRI,Last command response index" line.long 0x8 "CQCRA,Command Queuing Command Response Argument" hexmask.long 0x8 0.--31. 1. "LCMDRA,Last command response argument" tree.end tree "USDHC3" base ad:0x428B0000 group.long 0x0++0xF line.long 0x0 "DS_ADDR,DMA System Address" hexmask.long 0x0 0.--31. 1. "DS_ADDR,System address" line.long 0x4 "BLK_ATT,Block Attributes" hexmask.long.word 0x4 16.--31. 1. "BLKCNT,Blocks count for current transfer" newline hexmask.long.word 0x4 0.--12. 1. "BLKSIZE,Transfer block size" line.long 0x8 "CMD_ARG,Command Argument" hexmask.long 0x8 0.--31. 1. "CMDARG,Command argument" line.long 0xC "CMD_XFR_TYP,Command Transfer Type" hexmask.long.byte 0xC 24.--29. 1. "CMDINX,Command index" newline bitfld.long 0xC 22.--23. "CMDTYP,Command type" "0: Normal other commands,1: Suspend CMD52 for writing bus suspend in CCCR,2: Resume CMD52 for writing function select in CCCR,3: Abort CMD12 CMD52 for writing I/O Abort in CCCR" newline bitfld.long 0xC 21. "DPSEL,Data present select" "0: No data present,1: Data present" newline bitfld.long 0xC 20. "CICEN,Command index check enable" "0: Disable command index check,1: Enables command index check" newline bitfld.long 0xC 19. "CCCEN,Command CRC check enable" "0: Disables command CRC check,1: Enables command CRC check" newline bitfld.long 0xC 16.--17. "RSPTYP,Response type select" "0: No response,1: Response length 136,2: Response length 48,3: Response length 48 check busy after response" newline bitfld.long 0xC 7. "AC23EN,AC23EN" "0: Disable,1: Enable" newline bitfld.long 0xC 6. "NIBBLE_POS,NIBBLE_POS" "0: Disable,1: Enable" newline bitfld.long 0xC 5. "MSBSEL,MSBSEL" "0: Disable,1: Enable" newline bitfld.long 0xC 4. "DTDSEL,DTDSEL" "0: Disable,1: Enable" newline bitfld.long 0xC 3. "DDR_EN,DDR_EN" "0: Disable,1: Enable" newline bitfld.long 0xC 2. "AC12EN,AC12EN" "0: Disable,1: Enable" newline bitfld.long 0xC 1. "BCEN,BCEN" "0: Disable,1: Enable" newline bitfld.long 0xC 0. "DMAEN,DMAEN" "0: Disable,1: Enable" rgroup.long 0x10++0xF line.long 0x0 "CMD_RSP0,Command Response0" hexmask.long 0x0 0.--31. 1. "CMDRSP0,Command response 0" line.long 0x4 "CMD_RSP1,Command Response1" hexmask.long 0x4 0.--31. 1. "CMDRSP1,Command response 1" line.long 0x8 "CMD_RSP2,Command Response2" hexmask.long 0x8 0.--31. 1. "CMDRSP2,Command response 2" line.long 0xC "CMD_RSP3,Command Response3" hexmask.long 0xC 0.--31. 1. "CMDRSP3,Command response 3" group.long 0x20++0x3 line.long 0x0 "DATA_BUFF_ACC_PORT,Data Buffer Access Port" hexmask.long 0x0 0.--31. 1. "DATCONT,Data content" rgroup.long 0x24++0x3 line.long 0x0 "PRES_STATE,Present State" hexmask.long.byte 0x0 24.--31. 1. "DLSL,DATA[7:0] line signal level" newline bitfld.long 0x0 23. "CLSL,CMD line signal level" "0,1" newline bitfld.long 0x0 19. "WPSPL,Write protect switch pin level" "0: Write protected (WP = 1),1: Write enabled (WP = 0)" newline bitfld.long 0x0 18. "CDPL,Card detect pin level" "0: No card present (CD_B = 1),1: Card present (CD_B = 0)" newline bitfld.long 0x0 16. "CINST,Card inserted" "0: Power on reset or no card,1: Card inserted" newline bitfld.long 0x0 15. "TSCD,Tap select change done" "0: Delay cell select change is not finished.,1: Delay cell select change is finished." newline bitfld.long 0x0 12. "RTR,Re-Tuning Request (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Fixed or well tuned sampling clock,1: Sampling clock needs re-tuning" newline bitfld.long 0x0 11. "BREN,Buffer read enable" "0: Read disable,1: Read enable" newline bitfld.long 0x0 10. "BWEN,Buffer write enable" "0: Write disable,1: Write enable" newline bitfld.long 0x0 9. "RTA,Read transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x0 8. "WTA,Write transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x0 3. "SDSTB,SD clock stable" "0: Clock is changing frequency and not stable.,1: Clock is stable." newline bitfld.long 0x0 2. "DLA,Data line active" "0: DATA line inactive,1: DATA line active" newline bitfld.long 0x0 1. "CDIHB,Command Inhibit Data (DATA)" "0: Can issue command that uses the DATA line,1: Cannot issue command that uses the DATA line" newline bitfld.long 0x0 0. "CIHB,Command inhibit (CMD)" "0: Can issue command using only CMD line,1: Cannot issue command" group.long 0x28++0x23 line.long 0x0 "PROT_CTRL,Protocol Control" bitfld.long 0x0 30. "NON_EXACT_BLK_RD,Non-exact block read" "0: The block read is exact block read. Host driver..,1: The block read is non-exact block read. Host.." newline bitfld.long 0x0 26. "WECRM,Wakeup event enable on SD card removal" "0: Disables wakeup event enable on SD card removal,1: Enables wakeup event enable on SD card removal" newline bitfld.long 0x0 25. "WECINS,Wakeup event enable on SD card insertion" "0: Disable wakeup event enable on SD card insertion,1: Enable wakeup event enable on SD card insertion" newline bitfld.long 0x0 24. "WECINT,Wakeup event enable on card interrupt" "0: Disables wakeup event enable on card interrupt,1: Enables wakeup event enable on card interrupt" newline bitfld.long 0x0 20. "RD_DONE_NO_8CLK,Read performed number 8 clock" "0,1" newline bitfld.long 0x0 19. "IABG,Interrupt at block gap" "0: Disables interrupt at block gap,1: Enables interrupt at block gap" newline bitfld.long 0x0 18. "RWCTL,Read wait control" "0: Disables read wait control and stop SD clock at..,1: Enables read wait control and assert read wait.." newline bitfld.long 0x0 17. "CREQ,Continue request" "0: No effect,1: Restart" newline bitfld.long 0x0 16. "SABGREQ,Stop at block gap request" "0: Transfer,1: Stop" newline bitfld.long 0x0 8.--9. "DMASEL,DMA select" "0: No DMA or simple DMA is selected.,1: ADMA1 is selected.,2: ADMA2 is selected.,?" newline bitfld.long 0x0 7. "CDSS,Card detect signal selection" "0: Card detection level is selected (for normal..,1: Card detection test level is selected (for test.." newline bitfld.long 0x0 6. "CDTL,Card detect test level" "0: Card detect test level is 0 no card inserted,1: Card detect test level is 1 card inserted" newline bitfld.long 0x0 4.--5. "EMODE,Endian mode" "0: Big endian mode,1: Half word big endian mode,2: Little endian mode,?" newline bitfld.long 0x0 3. "D3CD,DATA3 as card detection pin" "0: DATA3 does not monitor card insertion,1: DATA3 as card detection pin" newline bitfld.long 0x0 1.--2. "DTW,Data transfer width" "0: 1-bit mode,1: 4-bit mode,2: 8-bit mode,?" line.long 0x4 "SYS_CTRL,System Control" bitfld.long 0x4 28. "RSTT,Reset tuning" "0,1" newline bitfld.long 0x4 27. "INITA,Initialization active" "0,1" newline bitfld.long 0x4 26. "RSTD,Software reset for data line" "0: No reset,1: Reset" newline bitfld.long 0x4 25. "RSTC,Software reset for CMD line" "0: No reset,1: Reset" newline bitfld.long 0x4 24. "RSTA,Software reset for all" "0: No reset,1: Reset" newline bitfld.long 0x4 23. "IPP_RST_N,Hardware reset" "0,1" newline hexmask.long.byte 0x4 16.--19. 1. "DTOCV,Data timeout counter value" newline hexmask.long.byte 0x4 8.--15. 1. "SDCLKFS,SDCLK frequency select" newline hexmask.long.byte 0x4 4.--7. 1. "DVS,Divisor" line.long 0x8 "INT_STATUS,Interrupt Status" eventfld.long 0x8 28. "DMAE,DMA error" "0: No error,1: Error" newline eventfld.long 0x8 26. "TNE,Tuning error: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x8 24. "AC12E,Auto CMD12 error" "0: No error,1: Error" newline eventfld.long 0x8 22. "DEBE,Data end bit error" "0: No error,1: Error" newline eventfld.long 0x8 21. "DCE,Data CRC error" "0: No error,1: Error" newline eventfld.long 0x8 20. "DTOE,Data timeout error" "0: No error,1: Time out" newline eventfld.long 0x8 19. "CIE,Command index error" "0: No error,1: Error" newline eventfld.long 0x8 18. "CEBE,Command end bit error" "0: No error,1: End bit error generated" newline eventfld.long 0x8 17. "CCE,Command CRC error" "0: No error,1: CRC error generated" newline eventfld.long 0x8 16. "CTOE,Command timeout error" "0: No error,1: Time out" newline rbitfld.long 0x8 15. "ERR_INT_STATUS,Error Interrupt Status" "0,1" newline eventfld.long 0x8 14. "CQI,Command queuing interrupt" "0,1" newline eventfld.long 0x8 13. "TP,Tuning pass:(only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x8 12. "RTE,Re-tuning event: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Re-tuning is not required.,1: Re-tuning should be performed." newline eventfld.long 0x8 8. "CINT,Card interrupt" "0: No card interrupt,1: Generate card interrupt" newline eventfld.long 0x8 7. "CRM,Card removal" "0: Card state unstable or inserted,1: Card removed" newline eventfld.long 0x8 6. "CINS,Card insertion" "0: Card state unstable or removed,1: Card inserted" newline eventfld.long 0x8 5. "BRR,Buffer read ready" "0: Not ready to read buffer,1: Ready to read buffer" newline eventfld.long 0x8 4. "BWR,Buffer write ready" "0: Not ready to write buffer,1: Ready to write buffer" newline eventfld.long 0x8 3. "DINT,DMA interrupt" "0: No DMA interrupt,1: DMA interrupt is generated." newline eventfld.long 0x8 2. "BGE,Block gap event" "0: No block gap event,1: Transaction stopped at block gap" newline eventfld.long 0x8 1. "TC,Transfer complete" "0: Transfer does not complete,1: Transfer complete" newline eventfld.long 0x8 0. "CC,Command complete" "0: Command not complete,1: Command complete" line.long 0xC "INT_STATUS_EN,Interrupt Status Enable" bitfld.long 0xC 28. "DMAESEN,DMA error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 26. "TNESEN,Tuning error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 24. "AC12ESEN,Auto CMD12 error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 22. "DEBESEN,Data end bit error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 21. "DCESEN,Data CRC error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 20. "DTOESEN,Data timeout error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 19. "CIESEN,Command index error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 18. "CEBESEN,Command end bit error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 17. "CCESEN,Command CRC error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 16. "CTOESEN,Command timeout error status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 14. "CQISEN,Command queuing status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 13. "TPSEN,Tuning pass status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 12. "RTESEN,Re-tuning event status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 8. "CINTSEN,Card interrupt status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 7. "CRMSEN,Card removal status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 6. "CINSSEN,Card insertion status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 5. "BRRSEN,Buffer read ready status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 4. "BWRSEN,Buffer write ready status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 3. "DINTSEN,DMA interrupt status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 2. "BGESEN,Block gap event status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 1. "TCSEN,Transfer complete status enable" "0: Masked,1: Enabled" newline bitfld.long 0xC 0. "CCSEN,Command complete status enable" "0: Masked,1: Enabled" line.long 0x10 "INT_SIGNAL_EN,Interrupt Signal Enable" bitfld.long 0x10 28. "DMAEIEN,DMA error interrupt enable" "0: Masked,1: Enable" newline bitfld.long 0x10 26. "TNEIEN,Tuning error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 24. "AC12EIEN,Auto CMD12 error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 22. "DEBEIEN,Data end bit error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 21. "DCEIEN,Data CRC error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 20. "DTOEIEN,Data timeout error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 19. "CIEIEN,Command index error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 18. "CEBEIEN,Command end bit error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 17. "CCEIEN,Command CRC error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 16. "CTOEIEN,Command timeout error interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 14. "CQIIEN,Command queuing signal enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 13. "TPIEN,Tuning pass interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 12. "RTEIEN,Re-tuning event interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 8. "CINTIEN,Card interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 7. "CRMIEN,Card removal interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 6. "CINSIEN,Card insertion interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 5. "BRRIEN,Buffer read ready interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 4. "BWRIEN,Buffer write ready interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 3. "DINTIEN,DMA interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 2. "BGEIEN,Block gap event interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 1. "TCIEN,Transfer complete interrupt enable" "0: Masked,1: Enabled" newline bitfld.long 0x10 0. "CCIEN,Command complete interrupt enable" "0: Masked,1: Enabled" line.long 0x14 "AUTOCMD12_ERR_STATUS,Auto CMD12 Error Status" bitfld.long 0x14 23. "SMP_CLK_SEL,Sample clock select" "0: Fixed clock is used to sample data,1: Tuned clock is used to sample data" newline bitfld.long 0x14 22. "EXECUTE_TUNING,Execute tuning" "0: Tuning procedure is aborted,1: Start tuning procedure" newline rbitfld.long 0x14 7. "CNIBAC12E,Command not issued by Auto CMD12 error" "0: No error,1: Not issued" newline rbitfld.long 0x14 4. "AC12IE,Auto CMD12 / 23 index error" "0: No error,1: Error the CMD index in response is not CMD12/23" newline rbitfld.long 0x14 3. "AC12EBE,Auto CMD12 / 23 end bit error" "0: No error,1: End bit error generated" newline rbitfld.long 0x14 2. "AC12CE,Auto CMD12 / 23 CRC error" "0: No CRC error,1: CRC error met in Auto CMD12/23 response" newline rbitfld.long 0x14 1. "AC12TOE,Auto CMD12 / 23 timeout error" "0: No error,1: Time out" newline rbitfld.long 0x14 0. "AC12NE,Auto CMD12 not executed" "0: Executed,1: Not executed" line.long 0x18 "HOST_CTRL_CAP,Host Controller Capabilities" rbitfld.long 0x18 26. "VS18,Voltage support 1.8 V" "0: 1.8 V not supported,1: 1.8 V supported" newline rbitfld.long 0x18 25. "VS30,Voltage support 3.0 V" "0: 3.0 V not supported,1: 3.0 V supported" newline rbitfld.long 0x18 24. "VS33,Voltage support 3.3 V" "0: 3.3 V not supported,1: 3.3 V supported" newline rbitfld.long 0x18 23. "SRS,Suspend / resume support" "0: Not supported,1: Supported" newline rbitfld.long 0x18 22. "DMAS,DMA support" "0: DMA not supported,1: DMA supported" newline rbitfld.long 0x18 21. "HSS,High speed support" "0: High speed not supported,1: High speed supported" newline rbitfld.long 0x18 20. "ADMAS,ADMA support" "0: Advanced DMA not supported,1: Advanced DMA supported" newline rbitfld.long 0x18 16.--18. "MBL,Max block length" "0: 512 bytes,1: 1024 bytes,2: 2048 bytes,3: 4096 bytes,?,?,?,?" newline bitfld.long 0x18 13. "USE_TUNING_SDR50,Use Tuning for SDR50" "0: SDR50 does not support tuning,1: SDR50 supports tuning" newline rbitfld.long 0x18 2. "DDR50_SUPPORT,DDR50 support" "0,1" newline rbitfld.long 0x18 1. "SDR104_SUPPORT,SDR104 support" "0,1" newline rbitfld.long 0x18 0. "SDR50_SUPPORT,SDR50 support" "0,1" line.long 0x1C "WTMK_LVL,Watermark Level" hexmask.long.byte 0x1C 16.--23. 1. "WR_WML,Write watermark level" newline hexmask.long.byte 0x1C 0.--7. 1. "RD_WML,Read watermark level" line.long 0x20 "MIX_CTRL,Mixer Control" bitfld.long 0x20 27. "EN_HS400_MODE,Enable enhance HS400 mode" "0,1" newline bitfld.long 0x20 26. "HS400_MODE,Enable HS400 mode" "0,1" newline bitfld.long 0x20 25. "FBCLK_SEL,Feedback clock source selection (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Feedback clock comes from the loopback CLK,1: Feedback clock comes from the ipp_card_clk_out" newline bitfld.long 0x20 24. "AUTO_TUNE_EN,Auto tuning enable (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Disable auto tuning,1: Enable auto tuning" newline bitfld.long 0x20 23. "SMP_CLK_SEL,Clock selection" "0: Fixed clock is used to sample data / cmd,1: Tuned clock is used to sample data / cmd" newline bitfld.long 0x20 22. "EXE_TUNE,Execute tuning: (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Not tuned or tuning completed,1: Execute tuning" newline bitfld.long 0x20 7. "AC23EN,Auto CMD23 enable" "0,1" newline bitfld.long 0x20 6. "NIBBLE_POS,Nibble position indication" "0,1" newline bitfld.long 0x20 5. "MSBSEL,Multi / Single block select" "0: Single block,1: Multiple blocks" newline bitfld.long 0x20 4. "DTDSEL,Data transfer direction select" "0: Write (Host to card),1: Read (Card to host)" newline bitfld.long 0x20 3. "DDR_EN,Dual data rate mode selection" "0,1" newline bitfld.long 0x20 2. "AC12EN,Auto CMD12 enable" "0: Disable,1: Enable" newline bitfld.long 0x20 1. "BCEN,Block count enable" "0: Disable,1: Enable" newline bitfld.long 0x20 0. "DMAEN,DMA enable" "0: Disable,1: Enable" group.long 0x50++0x3 line.long 0x0 "FORCE_EVENT,Force Event" bitfld.long 0x0 31. "FEVTCINT,Force event card interrupt" "0,1" newline bitfld.long 0x0 28. "FEVTDMAE,Force event DMA error" "0,1" newline bitfld.long 0x0 26. "FEVTTNE,Force tuning error" "0,1" newline bitfld.long 0x0 24. "FEVTAC12E,Force event Auto Command 12 error" "0,1" newline bitfld.long 0x0 22. "FEVTDEBE,Force event data end bit error" "0,1" newline bitfld.long 0x0 21. "FEVTDCE,Force event data CRC error" "0,1" newline bitfld.long 0x0 20. "FEVTDTOE,Force event data time out error" "0,1" newline bitfld.long 0x0 19. "FEVTCIE,Force event command index error" "0,1" newline bitfld.long 0x0 18. "FEVTCEBE,Force event command end bit error" "0,1" newline bitfld.long 0x0 17. "FEVTCCE,Force event command CRC error" "0,1" newline bitfld.long 0x0 16. "FEVTCTOE,Force event command time out error" "0,1" newline bitfld.long 0x0 7. "FEVTCNIBAC12E,Force event command not executed by Auto Command 12 error" "0,1" newline bitfld.long 0x0 4. "FEVTAC12IE,Force event Auto Command 12 index error" "0,1" newline bitfld.long 0x0 3. "FEVTAC12EBE,Force event Auto Command 12 end bit error" "0,1" newline bitfld.long 0x0 2. "FEVTAC12CE,Force event auto command 12 CRC error" "0,1" newline bitfld.long 0x0 1. "FEVTAC12TOE,Force event auto command 12 time out error" "0,1" newline bitfld.long 0x0 0. "FEVTAC12NE,Force event auto command 12 not executed" "0,1" rgroup.long 0x54++0x3 line.long 0x0 "ADMA_ERR_STATUS,ADMA Error Status" bitfld.long 0x0 3. "ADMADCE,ADMA descriptor error" "0: No error,1: Error" newline bitfld.long 0x0 2. "ADMALME,ADMA length mismatch error" "0: No error,1: Error" newline bitfld.long 0x0 0.--1. "ADMAES,ADMA error state (when ADMA error is occurred)" "0,1,2,3" group.long 0x58++0x3 line.long 0x0 "ADMA_SYS_ADDR,ADMA System Address" hexmask.long 0x0 2.--31. 1. "ADS_ADDR,ADMA system address" group.long 0x60++0x3 line.long 0x0 "DLL_CTRL,DLL (Delay Line) Control" hexmask.long.byte 0x0 28.--31. 1. "DLL_CTRL_REF_UPDATE_INT,DLL control loop update interval" newline hexmask.long.byte 0x0 20.--27. 1. "DLL_CTRL_SLV_UPDATE_INT,Slave delay line update interval" newline bitfld.long 0x0 16.--18. "DLL_CTRL_SLV_DLY_TARGET1,DLL slave delay target1" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x0 9.--15. 1. "DLL_CTRL_SLV_OVERRIDE_VAL,DLL slave override val" newline bitfld.long 0x0 8. "DLL_CTRL_SLV_OVERRIDE,DLL slave override" "0,1" newline bitfld.long 0x0 7. "DLL_CTRL_GATE_UPDATE,DLL gate update" "0,1" newline hexmask.long.byte 0x0 3.--6. 1. "DLL_CTRL_SLV_DLY_TARGET0,DLL slave delay target0" newline bitfld.long 0x0 2. "DLL_CTRL_SLV_FORCE_UPD,DLL slave delay line" "0,1" newline bitfld.long 0x0 1. "DLL_CTRL_RESET,DLL reset" "0,1" newline bitfld.long 0x0 0. "DLL_CTRL_ENABLE,DLL and delay chain" "0,1" rgroup.long 0x64++0x3 line.long 0x0 "DLL_STATUS,DLL Status" hexmask.long.byte 0x0 9.--15. 1. "DLL_STS_REF_SEL,Reference delay line select taps" newline hexmask.long.byte 0x0 2.--8. 1. "DLL_STS_SLV_SEL,Slave delay line select status" newline bitfld.long 0x0 1. "DLL_STS_REF_LOCK,Reference DLL lock status" "0,1" newline bitfld.long 0x0 0. "DLL_STS_SLV_LOCK,Slave delay-line lock status" "0,1" group.long 0x68++0x3 line.long 0x0 "CLK_TUNE_CTRL_STATUS,CLK Tuning Control and Status" rbitfld.long 0x0 31. "PRE_ERR,PRE error" "0,1" newline hexmask.long.byte 0x0 24.--30. 1. "TAP_SEL_PRE,TAP_SEL_PRE" newline hexmask.long.byte 0x0 20.--23. 1. "TAP_SEL_OUT,Delay cells added on the feedback clock between CLK_PRE and CLK_OUT" newline hexmask.long.byte 0x0 16.--19. 1. "TAP_SEL_POST,Delay cells added on the feedback clock between CLK_OUT and CLK_POST" newline rbitfld.long 0x0 15. "NXT_ERR,NXT error" "0,1" newline hexmask.long.byte 0x0 8.--14. 1. "DLY_CELL_SET_PRE,delay cells on the feedback clock between the feedback clock and CLK_PRE" newline hexmask.long.byte 0x0 4.--7. 1. "DLY_CELL_SET_OUT,Delay cells on the feedback clock between CLK_PRE and CLK_OUT" newline hexmask.long.byte 0x0 0.--3. 1. "DLY_CELL_SET_POST,Delay cells on the feedback clock between CLK_OUT and CLK_POST" group.long 0x70++0x3 line.long 0x0 "STROBE_DLL_CTRL,Strobe DLL control" hexmask.long.byte 0x0 28.--31. 1. "STROBE_DLL_CTRL_REF_UPDATE_INT,Strobe DLL control reference update interval" newline hexmask.long.byte 0x0 20.--27. 1. "STROBE_DLL_CTRL_SLV_UPDATE_INT,Strobe DLL control slave update interval" newline hexmask.long.byte 0x0 9.--15. 1. "STROBE_DLL_CTRL_SLV_OVERRIDE_VAL,Strobe DLL control slave Override value" newline bitfld.long 0x0 8. "STROBE_DLL_CTRL_SLV_OVERRIDE,Strobe DLL control slave override" "0,1" newline bitfld.long 0x0 7. "STROBE_DLL_CTRL_GATE_UPDATE,Strobe DLL control gate update" "0,1" newline hexmask.long.byte 0x0 3.--6. 1. "STROBE_DLL_CTRL_SLV_DLY_TARGET,Strobe DLL Control Slave Delay Target" newline bitfld.long 0x0 2. "STROBE_DLL_CTRL_SLV_FORCE_UPD,Strobe DLL control slave force updated" "0,1" newline bitfld.long 0x0 1. "STROBE_DLL_CTRL_RESET,Strobe DLL control reset" "0,1" newline bitfld.long 0x0 0. "STROBE_DLL_CTRL_ENABLE,Strobe DLL control enable" "0,1" rgroup.long 0x74++0x3 line.long 0x0 "STROBE_DLL_STATUS,Strobe DLL status" hexmask.long.byte 0x0 9.--15. 1. "STROBE_DLL_STS_REF_SEL,Strobe DLL status reference select" newline hexmask.long.byte 0x0 2.--8. 1. "STROBE_DLL_STS_SLV_SEL,Strobe DLL status slave select" newline bitfld.long 0x0 1. "STROBE_DLL_STS_REF_LOCK,Strobe DLL status reference lock" "0,1" newline bitfld.long 0x0 0. "STROBE_DLL_STS_SLV_LOCK,Strobe DLL status slave lock" "0,1" group.long 0xC0++0xF line.long 0x0 "VEND_SPEC,Vendor Specific Register" bitfld.long 0x0 31. "CMD_BYTE_EN,Register byte access for CMD_XFR_TYP" "0: Disable. MIX_CTRL[7:0] is read/write and..,1: Enable. MIX_CTRL[7:0] is read-only and.." newline bitfld.long 0x0 15. "CRC_CHK_DIS,CRC Check Disable" "0: Check CRC16 for every read data packet and check..,1: Ignore CRC16 check for every read data packet.." newline bitfld.long 0x0 8. "FRC_SDCLK_ON,Force CLK" "0: CLK active or inactive is fully controlled by..,1: Force CLK active" newline bitfld.long 0x0 3. "AC12_WR_CHKBUSY_EN,Check busy enable" "0: Do not check busy after auto CMD12 for write..,1: Check busy after auto CMD12 for write data packet" newline bitfld.long 0x0 1. "VSELECT,Voltage selection" "0: Change the voltage to high voltage range around..,1: Change the voltage to low voltage range around.." line.long 0x4 "MMC_BOOT,eMMC Boot" hexmask.long.word 0x4 16.--31. 1. "BOOT_BLK_CNT,Stop At Block Gap value of automatic mode" newline bitfld.long 0x4 8. "DISABLE_TIME_OUT,Time out" "0: Enable time out,1: Disable time out" newline bitfld.long 0x4 7. "AUTO_SABG_EN,Auto stop at block gap" "0,1" newline bitfld.long 0x4 6. "BOOT_EN,Boot enable" "0: Fast boot disable,1: Fast boot enable" newline bitfld.long 0x4 5. "BOOT_MODE,Boot mode" "0: Normal boot,1: Alternative boot" newline bitfld.long 0x4 4. "BOOT_ACK,BOOT ACK" "0: No ack,1: Ack" newline hexmask.long.byte 0x4 0.--3. 1. "DTOCV_ACK,DTOCV_ACK" line.long 0x8 "VEND_SPEC2,Vendor Specific 2 Register" hexmask.long.word 0x8 16.--31. 1. "FBCLK_TAP_SEL,Enable extra delay on internal feedback clock" newline bitfld.long 0x8 15. "EN_32K_CLK,Enable 32khz clock for card detection" "0,1" newline bitfld.long 0x8 12. "ACMD23_ARGU2_EN,Argument2 register enable for ACMD23" "0: Disable,1: Argument2 register enable for ACMD23 sharing.." newline bitfld.long 0x8 11. "HS400_RD_CLK_STOP_EN,HS400 read clock stop enable" "0,1" newline bitfld.long 0x8 10. "HS400_WR_CLK_STOP_EN,HS400 write clock stop enable" "0,1" newline bitfld.long 0x8 6. "TUNING_CMD_EN,Tuning command enable" "0: Auto tuning circuit does not check the CMD line.,1: Auto tuning circuit checks the CMD line." newline bitfld.long 0x8 5. "TUNING_1bit_EN,Tuning 1bit enable" "0,1" newline bitfld.long 0x8 4. "TUNING_8bit_EN,Tuning 8bit enable" "0,1" newline bitfld.long 0x8 3. "CARD_INT_D3_TEST,Card interrupt detection test" "0: Check the card interrupt only when DATA3 is high.,1: Check the card interrupt by ignoring the status.." line.long 0xC "TUNING_CTRL,Tuning Control" bitfld.long 0xC 24. "STD_TUNING_EN,Standard tuning circuit and procedure enable" "0,1" newline bitfld.long 0xC 20.--22. "TUNING_WINDOW,Data window" "0,1,2,3,4,5,6,7" newline bitfld.long 0xC 16.--18. "TUNING_STEP,TUNING_STEP" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0xC 8.--15. 1. "TUNING_COUNTER,Tuning counter" newline bitfld.long 0xC 7. "DIS_CMD_CHK_FOR_STD_TUNING,Disable command check for standard tuning" "0,1" newline hexmask.long.byte 0xC 0.--6. 1. "TUNING_START_TAP,Tuning start" rgroup.long 0x100++0x3 line.long 0x0 "CQVER,Command Queuing Version" hexmask.long.byte 0x0 8.--11. 1. "MAJOR_VN,eMMC major version number" newline hexmask.long.byte 0x0 4.--7. 1. "MINOR_VN,eMMC minor version number" newline hexmask.long.byte 0x0 0.--3. 1. "VERSION_SUFFIX,eMMC version suffix" group.long 0x104++0x2B line.long 0x0 "CQCAP,Command Queuing Capabilities" hexmask.long.byte 0x0 12.--15. 1. "ITCFMUL,Internal timer clock frequency multiplier" newline hexmask.long.word 0x0 0.--9. 1. "ITCFVAL,Internal timer clock frequency value" line.long 0x4 "CQCFG,Command Queuing Configuration" bitfld.long 0x4 12. "DCMDE,Direct command (DCMD) enable" "0: Task descriptor in slot #31 is a Data Transfer..,1: Task descriptor in slot #31 is a DCMD Task.." newline bitfld.long 0x4 8. "TDS,Task descriptor size" "0: Task descriptor size is 64 bits,1: Task descriptor size is 128 bits" newline bitfld.long 0x4 0. "CQUE,Command queuing enable" "0,1" line.long 0x8 "CQCTL,Command Queuing Control" bitfld.long 0x8 8. "CLEAR,Clear all tasks" "0,1" newline bitfld.long 0x8 0. "HALT,Halt" "0,1" line.long 0xC "CQIS,Command Queuing Interrupt Status" eventfld.long 0xC 3. "TCL,Task cleared" "0,1" newline eventfld.long 0xC 2. "RED,Response error detected interrupt" "0,1" newline eventfld.long 0xC 1. "TCC,Task complete interrupt" "0,1" newline eventfld.long 0xC 0. "HAC,Halt complete interrupt" "0,1" line.long 0x10 "CQISTE,Command Queuing Interrupt Status Enable" bitfld.long 0x10 3. "TCL_STE,Task cleared status enable" "0: CQIS[TCL] is disabled,1: CQIS[TCL] is set when its interrupt condition is.." newline bitfld.long 0x10 2. "RED_STE,Response error detected status enable" "0: CQIS[RED]is disabled,1: CQIS[RED] is set when its interrupt condition is.." newline bitfld.long 0x10 1. "TCC_STE,Task complete status enable" "0: CQIS[TCC] is disabled,1: CQIS[TCC] is set when its interrupt condition is.." newline bitfld.long 0x10 0. "HAC_STE,Halt complete status enable" "0: CQIS[HAC] is disabled,1: CQIS[HAC] is set when its interrupt condition is.." line.long 0x14 "CQISGE,Command Queuing Interrupt Signal Enable" bitfld.long 0x14 3. "TCL_SGE,Task cleared signal enable" "0,1" newline bitfld.long 0x14 2. "RED_SGE,Response error detected signal enable" "0,1" newline bitfld.long 0x14 1. "TCC_SGE,Task complete signal enable" "0,1" newline bitfld.long 0x14 0. "HAC_SGE,Halt complete signal enable" "0,1" line.long 0x18 "CQIC,Command Queuing Interrupt Coalescing" bitfld.long 0x18 31. "ICENDIS,Interrupt coalescing enable/disable" "0,1" newline rbitfld.long 0x18 20. "ICSB,Interrupt coalescing status" "0: No task completions have occurred since last..,1: At least one task completion has been counted.." newline bitfld.long 0x18 16. "ICCTR,Counter and timer reset" "0,1" newline bitfld.long 0x18 15. "ICCTHWEN,Interrupt coalescing counter threshold write enable" "0,1" newline hexmask.long.byte 0x18 8.--12. 1. "ICCTH,Interrupt coalescing counter threshold" newline bitfld.long 0x18 7. "ICTOVALWEN,Interrupt coalescing timeout value write enable" "0,1" newline hexmask.long.byte 0x18 0.--6. 1. "ICTOVAL,Interrupt coalescing timeout value" line.long 0x1C "CQTDLBA,Command Queuing Task Descriptor List Base Address" hexmask.long 0x1C 0.--31. 1. "TDLBA,Task descriptor list base address" line.long 0x20 "CQTDLBAU,Command Queuing Task Descriptor List Base Address Upper 32 Bits" hexmask.long 0x20 0.--31. 1. "TDLBAU,Task descriptor list base address" line.long 0x24 "CQTDBR,Command Queuing Task Doorbell" hexmask.long 0x24 0.--31. 1. "TDBR,Task doorbell" line.long 0x28 "CQTCN,Command Queuing Task Completion Notification" hexmask.long 0x28 0.--31. 1. "TCN,Task complete notification" rgroup.long 0x130++0x7 line.long 0x0 "CQDQS,Command Queuing Device Queue Status" hexmask.long 0x0 0.--31. 1. "DQS,Device queue status" line.long 0x4 "CQDPT,Command Queuing Device Pending Tasks" hexmask.long 0x4 0.--31. 1. "DPT,Device pending tasks" group.long 0x138++0x3 line.long 0x0 "CQTCLR,Command Queuing Task Clear" hexmask.long 0x0 0.--31. 1. "TCLR,Task clear" group.long 0x140++0x7 line.long 0x0 "CQSSC1,Command Queuing Send Status Configuration 1" hexmask.long.byte 0x0 16.--19. 1. "CBC,Send status command block counter" newline hexmask.long.word 0x0 0.--15. 1. "CIT,Send status command idle timer" line.long 0x4 "CQSSC2,Command Queuing Send Status Configuration 2" hexmask.long.word 0x4 0.--15. 1. "SSC2,Send queue status RCA" rgroup.long 0x148++0x3 line.long 0x0 "CQCRDCT,Command Queuing Command Response for Direct-Command Task" hexmask.long 0x0 0.--31. 1. "CRDCT,Direct command last response" group.long 0x150++0x3 line.long 0x0 "CQRMEM,Command Queuing Response Mode Error Mask" hexmask.long 0x0 0.--31. 1. "RMEM,Response mode error mask" rgroup.long 0x154++0xB line.long 0x0 "CQTERRI,Command Queuing Task Error Information" bitfld.long 0x0 31. "DTEFV,Data transfer error fields valid" "0,1" newline hexmask.long.byte 0x0 24.--28. 1. "DTETID,Data transfer error task ID" newline hexmask.long.byte 0x0 16.--21. 1. "DTECI,Data transfer error command index" newline bitfld.long 0x0 15. "RMEFV,Response mode error fields valid" "0,1" newline hexmask.long.byte 0x0 8.--12. 1. "RMETID,Response mode error task ID" newline hexmask.long.byte 0x0 0.--5. 1. "RMECI,Response mode error command index" line.long 0x4 "CQCRI,Command Queuing Command Response Index" hexmask.long.byte 0x4 0.--5. 1. "LCMDRI,Last command response index" line.long 0x8 "CQCRA,Command Queuing Command Response Argument" hexmask.long 0x8 0.--31. 1. "LCMDRA,Last command response argument" tree.end tree.end tree "WAKEUP_XSPI_RESPONDER" base ad:0x428A0000 group.long 0x0++0x2F line.long 0x0 "MODULE_CONTROL,Module Control" bitfld.long 0x0 11. "CMDRANGEBASEUPDATE,AXI Command Range Base Update" "0: Not updated,1: Updated" bitfld.long 0x0 10. "ALLOWONERD,Allow One More Read" "0: Not allowed,1: Allowed" newline bitfld.long 0x0 9. "ALLOWONEWR,Allow One More Write" "0: Not allowed,1: Allowed" bitfld.long 0x0 8. "BLKNXTRD,Block Next Read" "0: Allowed,1: Blocked" newline bitfld.long 0x0 7. "BLKNXTWR,Block Next Write Command" "0: Allowed,1: Blocked" bitfld.long 0x0 6. "BLKWRITE,Block Write" "0: Allowed,1: Blocked" newline bitfld.long 0x0 5. "BLKREAD,Block Read" "0: Allowed,1: Blocked" bitfld.long 0x0 4. "CSMASK,Chip Select Mask" "0: Not masked,1: Masked" newline bitfld.long 0x0 3. "DQSSTOP,DQS Stop Feature" "0: Disable,1: Enable" bitfld.long 0x0 1.--2. "IOMODE,SPI IO Mode Control" "0: SDR*4,1: SDR*8,2: DDR*4,3: DDR*8" newline bitfld.long 0x0 0. "SWRESET,Software Reset" "0: Finished,1: Initiate" line.long 0x4 "READ_COMMAND_CONTROL,Read Command Control" bitfld.long 0x4 9. "WMEN,Read Water Mark Enable" "0: Disable,1: Enable" bitfld.long 0x4 8. "RDOT,Read Outstanding" "0: Send requests after previous leaders finish,1: Send requests outstandingly" newline hexmask.long.byte 0x4 2.--7. 1. "RDWM,Read Watermark Level" bitfld.long 0x4 0.--1. "RDFETCHSIZE,Read Fetch Size" "0: 256 bytes,1: 512 bytes,2: 1 KB,3: 2 KB" line.long 0x8 "READ_REGISTER_COMMAND0,Read Register Command Setting" hexmask.long.word 0x8 16.--31. 1. "COMMANDSET,Read Register Command Setting" hexmask.long.word 0x8 0.--15. 1. "DUMMYCYCLES,Read Register Dummy Cycles" line.long 0xC "READ_COMMAND1,Read Command 1 setting" hexmask.long.word 0xC 16.--31. 1. "COMMANDSET,Read Command 1 Setting" hexmask.long.word 0xC 0.--15. 1. "DUMMYCYCLES,Read Command 1 Dummy Cycles" line.long 0x10 "READ_COMMAND2,Read Command 2 setting" hexmask.long.word 0x10 16.--31. 1. "COMMANDSET,Read Command 2 Setting" hexmask.long.word 0x10 0.--15. 1. "DUMMYCYCLES,Read Command 2 Dummy Cycles" line.long 0x14 "WRITE_COMMAND_CONTROL,Write Command Control" bitfld.long 0x14 0.--1. "WRWM,Write Watermark" "0: 32 bytes,1: 64 bytes,2: 128 bytes,3: 256 bytes" line.long 0x18 "WRITE_REGISTER_COMMAND0,Write Register Command 0 Setting" hexmask.long.word 0x18 16.--31. 1. "COMMANDSET,Write Register Command Setting" line.long 0x1C "WRITE_COMMAND1,Write Command 1 Setting" hexmask.long.word 0x1C 16.--31. 1. "COMMANDSET,Write Command 1 Setting" line.long 0x20 "WRITE_COMMAND2,Write Command 2 Setting" hexmask.long.word 0x20 16.--31. 1. "COMMANDSET,Write Command 2 Setting" line.long 0x24 "RW_COMMAND_BASE,Read Write Command Address Base" hexmask.long.word 0x24 16.--31. 1. "ADDRBASE2,Address Base 2" hexmask.long.word 0x24 0.--15. 1. "ADDRBASE1,Address Base 1" line.long 0x28 "CMD1_RANGE,Command Suit 1 Range" hexmask.long.tbyte 0x28 10.--31. 1. "RANGE,Memory Range" line.long 0x2C "CMD2_RANGE,Command Suit 2 Range" hexmask.long.tbyte 0x2C 10.--31. 1. "RANGE,Memory Range" rgroup.long 0x30++0x3 line.long 0x0 "MODULE_STATUS,Module Status" bitfld.long 0x0 13. "ALLOWAXIWR,Allow AXI Write Access" "0: Denied,1: Allowed" bitfld.long 0x0 12. "ALLOWAXIRD,Allow AXI Read Access" "0: Denied,1: Allowed" newline hexmask.long.byte 0x0 8.--11. 1. "WROFR,Write Out-of-Range Counter" hexmask.long.byte 0x0 4.--7. 1. "RDOFR,Read Out-of-Range Counter" newline bitfld.long 0x0 3. "SEQIDLE,SEQ Controller Idle" "0: Busy,1: Idle" bitfld.long 0x0 2. "REGRWIDLE,Register Read Write Idle" "0: Busy,1: Idle" newline bitfld.long 0x0 1. "AXIREADIDLE,AXI Read Leader Idle" "0: Busy,1: Idle" bitfld.long 0x0 0. "WIP,Write in Progress" "0: Not busy,1: Busy" group.long 0x34++0xB line.long 0x0 "MODULE_INT,SPI FLR interrupt" eventfld.long 0x0 2. "ERRCMD,Error Command" "0: Not received,1: Received" eventfld.long 0x0 1. "RUF,Read Underflow" "0: Did not occur,1: Occurred" newline eventfld.long 0x0 0. "WOF,Write Overflow Interrupt" "0: Did not occur,1: Occurred" line.long 0x4 "MODULE_INTEN,SPI FLR Interrupt Enable" bitfld.long 0x4 2. "ERRCMDEN,Error Command Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x4 1. "RUFEN,Read Underflow Interrupt Enable" "0: Disable,1: Enable" newline bitfld.long 0x4 0. "WOFEN,Write Overflow Interrupt Enable" "0: Disable,1: Enable" line.long 0x8 "SPI_MAIL_CTRL,SPI Mailbox control" bitfld.long 0x8 1. "SPIINTEN,SPI Leader Interrupt Enable" "0: Disable,1: Enable" bitfld.long 0x8 0. "CLRINT,Clear Interrupt" "0: Do not clear,1: Clear" repeat 9. (increment 0x0 0x1)(increment 0x0 0x4) rgroup.long ($2+0x40)++0x3 line.long 0x0 "SPIMAIL[$1],SPI Mail Interrupt" hexmask.long 0x0 0.--31. 1. "MAILn,Specifies the use of MAILn for Inter-Processor Communication (IPC) protocol for SPI leader and follower communication. MAILn[0] is used to generate an interrupt." repeat.end tree.end tree.end tree "XS_PCS_MMD" base ad:0x4C800000 group.word 0x0++0x1 line.word 0x0 "SR_XS_PCS_CTRL1,SR XS or PCS MMD Control1 Register" bitfld.word 0x0 15. "RST,RST" "0,1" newline rbitfld.word 0x0 14. "LBE,Reserved" "0,1" newline rbitfld.word 0x0 13. "SS13,Speed Selection This bit indicates the operational mode of the PCS-X block of the DWC_xpcs." "0,1" newline bitfld.word 0x0 11. "LPM,Low-Power Enable This bit controls the power-down mode of DWC_xpcs." "0,1" newline bitfld.word 0x0 10. "CS_EN,." "0,1" newline rbitfld.word 0x0 9. "XAUI_STOP,Reserved" "0,1" newline rbitfld.word 0x0 6. "SS6,Speed Selection Bit 6 This bit always returns 1." "0,1" newline hexmask.word.byte 0x0 2.--5. 1. "SS_5_2,Speed Selection Bits [5:2] This field always returns 4'b0000." rgroup.word 0x2++0xB line.word 0x0 "SR_XS_PCS_STS1,SR XS or PCS MMD Status1 Register" bitfld.word 0x0 11. "TXLPIR,TXLPIR" "0,1" newline bitfld.word 0x0 10. "RXLPIR,RXLPIR" "0,1" newline bitfld.word 0x0 9. "TXLPII,TXLPII" "0,1" newline bitfld.word 0x0 8. "RXLPII,RXLPII" "0,1" newline bitfld.word 0x0 7. "FLT,Fault Condition Detected This bit indicates that a fault condition is detected in the DWC_xpcs." "0,1" newline bitfld.word 0x0 6. "CSC,CSC" "0,1" newline bitfld.word 0x0 2. "RLU,Rx Link Up (RO LL Type) XS MMD and PCS MMD in 10G mode: - 0: When code group alignment and block lock are not successful." "0: When code group alignment and block lock are not..,?" newline bitfld.word 0x0 1. "LPMS,Low-Power Mode Support This bit indicates that the DWC_xpcs supports the low-power mode." "0,1" line.word 0x2 "SR_XS_PCS_DEV_ID1,SR XS or PCS MMD Device Identifier 1 Register" hexmask.word 0x2 0.--15. 1. "PCS_DEV_OUI_3_18,Organizationally Unique Identifier[3:18] The DWC_xpcs offers 24 configurable bits [24:1] known as OUI for identifying the device manufacturer." line.word 0x4 "SR_XS_PCS_DEV_ID2,SR XS or PCS MMD Device Identifier 2 Register" hexmask.word.byte 0x4 10.--15. 1. "PCS_DEV_OUI_19_24,Organizationally Unique Identifier[19:24] The DWC_xpcs offers 24 configurable bits [24:1] known as OUI for identifying the device manufacturer." newline hexmask.word.byte 0x4 4.--9. 1. "PCS_DEV_MMN_5_0,Model Number This read-only field contains the 6-bit Model number of the device." newline hexmask.word.byte 0x4 0.--3. 1. "PCS_DEV_RN_3_0,Revision Number This read-only field contains the 4-bit Revision number of the device." line.word 0x6 "SR_XS_PCS_SPD_ABL,SR XS or PCS MMD Speed Ability Register" bitfld.word 0x6 0. "XGC,10G Capable This bit indicates that DWC_xpcs can support 10G mode." "0,1" line.word 0x8 "SR_XS_PCS_DEV_PKG1,SR XS or PCS MMD Devices in Package 1 Register" bitfld.word 0x8 7. "AN,Auto-Negotiation MMD This bit indicates that an AN MMD is present in the package." "0,1" newline bitfld.word 0x8 6. "TC,TC MMD This bit indicates that the device has the TC MMDs in the package." "0,1" newline bitfld.word 0x8 5. "DTEXS,DTE XGXS MMD This bit indicates that the device has the DTE XS MMD in the package." "0,1" newline bitfld.word 0x8 4. "PHYXS,PHY XGXS MMD This bit indicates that the device has the PHY XS MMD in the package." "0,1" newline bitfld.word 0x8 3. "PCS,PCS MMD This bit indicates that the device has the PCS MMD in the package." "0,1" newline bitfld.word 0x8 2. "WIS,WIS MMD This bit indicates that the device has the WIS MMDs in the package." "0,1" newline bitfld.word 0x8 1. "PMA_PMD,PMA or PMD MMD This bit indicates that the device has PMA or PMD MMD in the package." "0,1" newline bitfld.word 0x8 0. "CLS22,Clause 22 Register Support This bit indicates that the Clause 22 (1G) functional register sets are implemented in this package." "0,1" line.word 0xA "SR_XS_PCS_DEV_PKG2,SR XS or PCS MMD Devices in Package 2 Register" bitfld.word 0xA 15. "VSD2,Vendor-Specific Device 2 This bit indicates that a vendor-specific device 2 (MII MMD) is present in the package." "0,1" newline bitfld.word 0xA 14. "VSD1,Vendor-specific Device 1 This bit indicates that the vendor-specific device 1 is present in the package." "0,1" group.word 0xE++0x1 line.word 0x0 "SR_XS_PCS_CTRL2,SR PCS Control2 Register This register is applicable only for the PCS MMD." hexmask.word.byte 0x0 0.--3. 1. "PCS_TYPE_SEL,PCS Type Select This field is used to select PCS operating mode in DWC_xpcs when multiple speed modes are present." rgroup.word 0x10++0x3 line.word 0x0 "SR_XS_PCS_STS2,SR XS or PCS MMD Status2 Register" bitfld.word 0x0 14.--15. "DS,Device Present Status - 2'b10: Indicates that the MMD is present and responding to this register address." "?,?,2: Indicates that the MMD is present and responding..,?" newline bitfld.word 0x0 11. "TF,Transmitter Fault (LH Type) This bit indicates that DWC_xpcs encountered a remote fault condition being transmitted on the Tx path." "0,1" newline bitfld.word 0x0 10. "RF,Receiver Fault (LH Type) This bit indicates that the device encountered a fault condition on the Rx path." "0,1" newline bitfld.word 0x0 3. "CAP_10GBT,10GBASE-T Capable This bit indicates if DWC_xpcs is capable of 10GBASE-T operation." "0,1" newline bitfld.word 0x0 2. "CAP_10GBW,10GBASE-W Capable This bit indicates if DWC_xpcs is capable of the 10GBASE-W operation." "0,1" newline bitfld.word 0x0 1. "CAP_10_1GC,10GBASE-X Capable This bit indicates if DWC_xpcs is capable of the 10GBASE-X operation." "0,1" newline bitfld.word 0x0 0. "CAP_EN,10GBASE-R Capable This bit indicates if DWC_xpcs is capable of 10GBASE-R operation." "0,1" line.word 0x2 "SR_XS_PCS_STS3,SR PCS MMD Status3 Register This register is applicable only for the PCS MMD" bitfld.word 0x2 3. "CAP_5GR,5GBASE-R Capable This bit if DWC_xpcs supports 5GBASE-R mode." "0,1" newline bitfld.word 0x2 2. "CAP_2PT5GX,2." "0,1" newline bitfld.word 0x2 1. "CAP_400GR,400GBASE-R Capable This bit always return 0." "0,1" newline bitfld.word 0x2 0. "CAP_200GR,200GBASE-R Capable This bit always return 0." "0,1" rgroup.word 0x1C++0x3 line.word 0x0 "SR_XS_PCS_PKG1,SR XS or PCS MMD Package Identifier 1 Register" hexmask.word 0x0 0.--15. 1. "PCS_PKG_OUI_3_18,Organizationally Unique Identifier DWC_xpcs offers 24 configurable bits[24:1] known as OUI for identifying the device manufacturer." line.word 0x2 "SR_XS_PCS_PKG2,SR XS or PCS MMD Package Identifier 2 Register" hexmask.word.byte 0x2 10.--15. 1. "PCS_PKG_OUI_19_24,Organizationally Unique Identifier DWC_xpcs offers 24 configurable bits [24:1] known as OUI for identifying the device manufacturer." newline hexmask.word.byte 0x2 4.--9. 1. "PCS_PKG_MMN_5_0,Model Number This read-only field contains the 5-bit model number of the package that is common for all the MMDs in the Device." newline hexmask.word.byte 0x2 0.--3. 1. "PCS_PKG_RN_3_0,Revision Number This read-only field contains the 4-bit revision number of the package in which the MMDs are installed." rgroup.word 0x28++0x5 line.word 0x0 "SR_XS_PCS_EEE_ABL,SR XS or PCS MMD EEE Capability Register" bitfld.word 0x0 6. "KREEE,." "0,1" newline bitfld.word 0x0 5. "KX4EEE,." "0,1" newline bitfld.word 0x0 4. "KXEEE,XGXS KX or 1G EEE Support This bit indicates EEE support for XGXS PCS KX or 1G mode." "0,1" newline bitfld.word 0x0 3. "TEEE,TEEE" "0,1" newline bitfld.word 0x0 2. "EN_1GTEEE,EN_1GTEEE" "0,1" newline bitfld.word 0x0 1. "EN_100TEE,EN_100TEE" "0,1" newline bitfld.word 0x0 0. "XS,Reserved" "0,1" line.word 0x2 "SR_XS_PCS_EEE_ABL2,SR PCS MMD EEE Control and Capability2 Register" bitfld.word 0x2 8. "EEE_5GKR,5GBASE-KR EEE Mode support." "0,1" newline bitfld.word 0x2 7. "EEE_2PT5GKX,2." "0,1" newline bitfld.word 0x2 2. "EEE_25GT,25GBASE-T EEE Mode support." "0,1" newline bitfld.word 0x2 1. "EEE_5GT,5GBASE-T EEE Mode support." "0,1" newline bitfld.word 0x2 0. "EEE_2PT5GT,2." "0,1" line.word 0x4 "SR_XS_PCS_EEE_WKERR,SR XS or PCS MMD EEE Wake Error Counter Register This register is present only when EEE_EN = Enabled." hexmask.word 0x4 0.--15. 1. "EEE_WEC,EEE Wake Error Counter This field indicates the Rx wake up error counter in the EEE mode." rgroup.word 0x30++0x1 line.word 0x0 "SR_XS_PCS_LSTS,." bitfld.word 0x0 12. "LA,Receiver Lanes are Aligned This bit is set to 1 when Rx lanes are successfully deskewed." "0,1" newline bitfld.word 0x0 11. "TPA,Test Pattern Ability This bit indicates that DWC_xpcs is capable of generating test patterns." "0,1" newline bitfld.word 0x0 10. "LBA,." "0,1" newline hexmask.word.byte 0x0 0.--3. 1. "LNS,Lane Synchronization LNS{lane} indicates that code group alignment and synchronization are successful in the corresponding lane." group.word 0x32++0x1 line.word 0x0 "SR_XS_PCS_TCTRL,." bitfld.word 0x0 2. "TPE,TPE" "0,1" newline bitfld.word 0x0 0.--1. "TP,Test Pattern Select This field indicates the pattern type that is enabled with Bit 2 (TPE)." "0,1,2,3" rgroup.word 0x40++0x3 line.word 0x0 "SR_XS_PCS_KR_STS1,." bitfld.word 0x0 12. "PLU,PLU" "0,1" newline bitfld.word 0x0 3. "PRBS9ABL,." "0,1" newline bitfld.word 0x0 2. "PRBS31ABL,." "0,1" newline bitfld.word 0x0 1. "RPCS_HIBER,10GBASE-R PCS High Bit Error Rate - 1: 10GBASE-R or 10GBASE-KR PCS reporting a high BER - 0: 10GBASE-R or 10GBASE-KR PCS not reporting a high BER" "0,1" newline bitfld.word 0x0 0. "RPCS_BKLK,10GBASE-R Block Lock - 1: 10GBASE-R is locked (Block Alignment Success) to received blocks - 0: 10GBASE-R is not locked to received blocks" "0,1" line.word 0x2 "SR_XS_PCS_KR_STS2,." bitfld.word 0x2 15. "LAT_BL,." "0,1" newline bitfld.word 0x2 14. "LAT_HBER,Latched High Bit Error Rate (RO LH Type) High bit error is when more than 15 invalid 66-bit blocks are received in 125us duration." "0,1" newline hexmask.word.byte 0x2 8.--13. 1. "BER_CNT,Bit Error Rate Counter Value (RO COR Type) This field indicates the high bit error count on the receive path." newline hexmask.word.byte 0x2 0.--7. 1. "ERR_BLK,Error Block Counter Value (RO COR Type) This field indicates invalid 66-bit blocks in the receive path." group.word 0x44++0x11 line.word 0x0 "SR_XS_PCS_TP_A0,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed A0 Register This register contains Bits[15:0] of Test pattern seed A." hexmask.word 0x0 0.--15. 1. "TP_SA0,Test Pattern Seed A0 This field contains Bits[15:0] of Test pattern seed A." line.word 0x2 "SR_XS_PCS_TP_A1,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed A1 Register" hexmask.word 0x2 0.--15. 1. "TP_SA1,Test Pattern Seed A1 This field contains Bits[31:16] of Test pattern seed A." line.word 0x4 "SR_XS_PCS_TP_A2,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed A2 Register" hexmask.word 0x4 0.--15. 1. "TP_SA2,Test Pattern Seed A2 This field contains Bits[47:32] of Test pattern seed A." line.word 0x6 "SR_XS_PCS_TP_A3,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed A3 Register" hexmask.word 0x6 0.--9. 1. "TP_SA3,Test Pattern Seed A3 This field contains Bits[57:48] of Test pattern seed A." line.word 0x8 "SR_XS_PCS_TP_B0,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed B0 Register This register contains Bits[15:0] of Test pattern seed B." hexmask.word 0x8 0.--15. 1. "TP_SB0,Test Pattern Seed B0 This field contains Bits[15:0] of Test pattern seed B." line.word 0xA "SR_XS_PCS_TP_B1,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed B1 Register" hexmask.word 0xA 0.--15. 1. "TP_SB1,Test Pattern Seed B1 This field contains Bits[31:16] of Test pattern seed B." line.word 0xC "SR_XS_PCS_TP_B2,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed B2 Register" hexmask.word 0xC 0.--15. 1. "TP_SB2,Test Pattern Seed B2 This field contains Bits[47:32] of Test pattern seed B." line.word 0xE "SR_XS_PCS_TP_B3,SR PCS MMD 5G/10GBASE-R Pseudo-Random Test Pattern Seed B3 Register" hexmask.word 0xE 0.--9. 1. "TP_SB3,Test Pattern Seed B3 This field contains Bits[57:48] of Test pattern seed B." line.word 0x10 "SR_XS_PCS_TP_CTRL,." bitfld.word 0x10 6. "PRBS9T_EN,." "0,1" newline bitfld.word 0x10 5. "PRBS31R_EN,." "0,1" newline bitfld.word 0x10 4. "PRBS31T_EN,." "0,1" newline bitfld.word 0x10 3. "TTP_EN,TTP_EN" "0,1" newline bitfld.word 0x10 2. "RTP_EN,RTP_EN" "0,1" newline bitfld.word 0x10 1. "TP_SEL,Transmit Test Pattern Select When set DWC_xpcs transmits the square wave test pattern." "0,1" newline bitfld.word 0x10 0. "DP_SEL,DP_SEL" "0,1" rgroup.word 0x56++0x1 line.word 0x0 "SR_XS_PCS_TP_ERRCTR,." hexmask.word 0x0 0.--15. 1. "TP_ERR_CNT,TP_ERR_CNT" rgroup.word 0xE10++0x11 line.word 0x0 "SR_PCS_TIME_SYNC_PCS_ABL,SR PCS MMD Time Sync Capability Register" bitfld.word 0x0 13. "TREF_SFD,." "0,1" newline bitfld.word 0x0 12. "TREF_FS,." "0,1" newline bitfld.word 0x0 11. "MLS,Multi-lane Support." "0,1" newline bitfld.word 0x0 10. "NUC,Num_Unit_Change Support Available." "0,1" newline bitfld.word 0x0 3. "FINE_TX_DLY,Fine Resolution Transmit Path Data Delay Available." "0,1" newline bitfld.word 0x0 2. "FINE_RX_DLY,Fine Resolution Receive Path Data Delay Available." "0,1" newline bitfld.word 0x0 1. "TX_DLY_ABL,PCS Transmit Path Data Delay Information Available." "0,1" newline bitfld.word 0x0 0. "RX_DLY_ABL,PCS Receive Path Data Delay Information Available." "0,1" line.word 0x2 "SR_PCS_TIME_SYNC_TX_MAX_DLY_LWR,SR PCS MMD Time Sync Tx Max Delay Lower Register" hexmask.word 0x2 0.--15. 1. "PCS_TX_MAX_DLY_LWR,PCS_TX_MAX_DLY_LWR" line.word 0x4 "SR_PCS_TIME_SYNC_TX_MAX_DLY_UPR,SR PCS MMD Time Sync Tx Max Delay Upper Register" hexmask.word 0x4 0.--15. 1. "PCS_TX_MAX_DLY_UPR,PCS_TX_MAX_DLY_UPR" line.word 0x6 "SR_PCS_TIME_SYNC_TX_MIN_DLY_LWR,SR PCS MMD Time Sync Tx Min Delay Lower Register" hexmask.word 0x6 0.--15. 1. "PCS_TX_MIN_DLY_LWR,PCS_TX_MIN_DLY_LWR" line.word 0x8 "SR_PCS_TIME_SYNC_TX_MIN_DLY_UPR,SR PCS MMD Time Sync Tx Min Delay Upper Register" hexmask.word 0x8 0.--15. 1. "PCS_TX_MIN_DLY_UPR,PCS_TX_MIN_DLY_UPR" line.word 0xA "SR_PCS_TIME_SYNC_RX_MAX_DLY_LWR,SR PCS MMD Time Sync Rx Max Delay Lower Register" hexmask.word 0xA 0.--15. 1. "PCS_RX_MAX_DLY_LWR,PCS_RX_MAX_DLY_LWR" line.word 0xC "SR_PCS_TIME_SYNC_RX_MAX_DLY_UPR,SR PCS MMD Time Sync Rx Max Delay Upper Register" hexmask.word 0xC 0.--15. 1. "PCS_RX_MAX_DLY_UPR,PCS_RX_MAX_DLY_UPR" line.word 0xE "SR_PCS_TIME_SYNC_RX_MIN_DLY_LWR,SR PCS MMD Time Sync Rx Min Delay Lower Register" hexmask.word 0xE 0.--15. 1. "PCS_RX_MIN_DLY_LWR,PCS_RX_MIN_DLY_LWR" line.word 0x10 "SR_PCS_TIME_SYNC_RX_MIN_DLY_UPR,SR PCS MMD Time Sync Rx Min Delay Upper Register" hexmask.word 0x10 0.--15. 1. "PCS_RX_MIN_DLY_UPR,PCS_RX_MIN_DLY_UPR" group.word 0x10000++0x5 line.word 0x0 "VR_XS_PCS_DIG_CTRL1,VR XS or PCS MMD Digital Control1 Register" bitfld.word 0x0 15. "VR_RST,VR_RST" "0,1" newline bitfld.word 0x0 14. "R2TLBE,Rx to Tx Loopback Enable This bit controls the loopback path from the XGMII or GMII Rx to the XGMII or GMII Tx at the XGMII interface." "0,1" newline bitfld.word 0x0 13. "EN_VSMMD1,Enable Vendor-Specific MMD1 When this bit is set to 1 the Vendor-Specific MMD1 (VSMMD1) is enabled." "0,1" newline rbitfld.word 0x0 12. "CL37_BP,CL37_BP" "0,1" newline bitfld.word 0x0 11. "PWRSV,Power Save This bit is present only when the DWC_xpcs is configured for Synopsys PHY." "0,1" newline bitfld.word 0x0 10. "USRA_RST,USXGMII Rate Adapter Reset (Port 0) This bit can be set to 1 to reset/initialize the USXGMII Rate Adapter Logic (for port 0) inside DWC_xpcs." "0,1" newline bitfld.word 0x0 9. "USXG_EN,USXGMII Mode Enable When this bit is set DWC_xpcs operates in 10G-USXGMII mode." "0,1" newline bitfld.word 0x0 8. "INIT,Datapath Initialization Control This bit can be set to flush/initialize the various FIFOs implemented inside DWC_xpcs." "0,1" newline rbitfld.word 0x0 5.--7. "DTXLANED_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 4. "DTXLANED_0,Tx Disable on Lane 0 When this bit is 1 the DWC_xpcs disables the Tx Lane 0 of the PHY." "0,1" newline rbitfld.word 0x0 3. "CR_CJN,Reserved" "0,1" newline bitfld.word 0x0 2. "EN_2_5G_MODE,Enable 2." "0,1" newline bitfld.word 0x0 1. "BYP_PWRUP,Bypass Power-Up Sequence This bit is present only when the DWC_xpcs is configured for the Synopsys PHY." "0,1" newline rbitfld.word 0x0 0. "DSKBYP,." "0,1" line.word 0x2 "VR_XS_PCS_DIG_CTRL2,VR XS or PCS MMD Digital Control2 Register" rbitfld.word 0x2 13.--15. "PTX_LN_DIS_3_1,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0x2 9.--11. "PRX_LN_DIS_3_1,Reserved" "0,1,2,3,4,5,6,7" newline rbitfld.word 0x2 5.--7. "TX_POL_INV_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 4. "TX_POL_INV_0,Tx Polarity Invert on Lane 0 When set to 1 this bit reverses the data polarity on the Tx differential lines of Lane 0." "0,1" newline rbitfld.word 0x2 1.--3. "RX_POL_INV_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x2 0. "RX_POL_INV_0,Rx Polarity Invert on Lane 0." "0,1" line.word 0x4 "VR_XS_PCS_DIG_ERRCNT_SEL,VR XS or PCS MMD Digital Error Count Select Register." rbitfld.word 0x4 7. "TP_MIS_EN,Reserved" "0,1" newline rbitfld.word 0x4 6. "DSKW_EC_EN,Reserved" "0,1" newline rbitfld.word 0x4 5. "CHKEND_EC_EN,Reserved" "0,1" newline bitfld.word 0x4 4. "INV_EC_EN,Invalid Code Group Error Counter Enable When this bit is set the counting of invalid code group errors is enabled." "0,1" newline rbitfld.word 0x4 1.--3. "reserved_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 0. "COR,Clear on Read When this bit is set and the host reads any error counter that counter is cleared after the read cycle." "0,1" rgroup.word 0x10008++0x1 line.word 0x0 "VR_XS_PCS_XAUI_CTRL,VR XS or PCS MMD XAUI Mode Control Register This register is present only when the DWC_xpcs is configured for RXAUI." bitfld.word 0x0 1. "MRVL_RXAUI,Reserved" "0,1" newline bitfld.word 0x0 0. "XAUI_MODE,Reserved" "0,1" group.word 0x1000A++0x9 line.word 0x0 "VR_XS_PCS_DEBUG_CTRL,VR XS or PCS MMD Debug Control Register" rbitfld.word 0x0 10. "SS_CORE_EN,Reserved" "0,1" newline bitfld.word 0x0 9. "RX_PMBL_CTL,Receive Preamble Control This bit can be set to 1 when DWC_xpcs is operating in 2." "0,1" newline bitfld.word 0x0 8. "TX_PMBL_CTL,TX_PMBL_CTL" "0,1" newline bitfld.word 0x0 7. "RX_SYNC_CTL,RX_SYNC_CTL" "0,1" newline bitfld.word 0x0 6. "RX_DT_EN_CTL,Rx Data Enable Control." "0,1" newline bitfld.word 0x0 5. "SUPRESS_EEE_LOS_DET,Suppress EEE Loss of Signal Detection." "0,1" newline bitfld.word 0x0 4. "SUPRESS_LOS_DET,SUPRESS_LOS_DET" "0,1" newline rbitfld.word 0x0 1.--3. "RESTAR_SYNC_3_1,Reserved" "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 0. "RESTAR_SYNC_0,Restart Synchronization on Lane 0 When set to 1 this bit restarts the Rx synchronization state machine of PCS-X block on Lane 0." "0,1" line.word 0x2 "VR_XS_PCS_EEE_MCTRL0,VR XS or PCS MMD EEE Mode Control Register This register enables or disables the Energy Efficient Ethernet (EEE) support." hexmask.word.byte 0x2 12.--15. 1. "CLKSTOP,Clock Stop This field controls the count value after which the Rx clock to the MAC can be stopped." newline hexmask.word.byte 0x2 8.--11. 1. "MULT_FACT_100NS,100 ns Clock Tic Multiplying Factor This bit is the multiplying factor to the clk_eee_i clock time period to make it closer to 100 ns." newline bitfld.word 0x2 7. "RX_EN_CTRL,Rx Control Enable This bit controls the generation of the xpcs_rx_en_o{lane} signal." "0,1" newline bitfld.word 0x2 6. "SIGN_BIT,Effective 100 ns Tic Value The host must use this bit to fine tune the EEE timing requirement." "0,1" newline bitfld.word 0x2 5. "EEE_SLR_BYP,Scrambler Bypass This bit is used to bypass the transmit scrambler to enable the Rapid Block synchronization." "0,1" newline bitfld.word 0x2 4. "TX_EN_CTRL,TX_EN_CTRL" "0,1" newline bitfld.word 0x2 3. "RX_QUIET_EN,Rx Quiet Enable This bit controls the generation of the xpcs_lpirx_quiet_o output." "0,1" newline bitfld.word 0x2 2. "TX_QUIET_EN,Tx Quiet Enable This bit controls the generation of the xpcs_lpitx_quiet_o output." "0,1" newline bitfld.word 0x2 1. "LRX_EN,LPI Rx Enable When set to 1 this bit enables the Energy Efficient Ethernet support in the DWC_xpcs Receive path." "0,1" newline bitfld.word 0x2 0. "LTX_EN,LPI Tx Enable When set to 1 this bit enables the Energy Efficient Ethernet support in the DWC_xpcs Transmit path." "0,1" line.word 0x4 "VR_XS_PCS_KR_CTRL,." rbitfld.word 0x4 14. "CSTM_AMLK,Customer Alignment Marker Lock Mode Enable As per USXGMII specification version 2." "0,1" newline bitfld.word 0x4 13. "USXG_2PT5G_GMII,MAC/PCS interface select in USXGMII 2." "0,1" newline bitfld.word 0x4 10.--12. "USXG_MODE,USXGMII Mode Select This field chooses the current USXGMII mode in which DWC_xpcs must operate." "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 9. "DIS_DESCR,Disable Descrambler When set to 1 this bit disables the 10GBASE-R PCS descrambling function." "0,1" newline bitfld.word 0x4 8. "DIS_SCR,Disable Scrambler When set to 1 this bit disables the 10GBASE-R PCS scrambling function." "0,1" newline bitfld.word 0x4 7. "PRBS9RXEN,." "0,1" newline bitfld.word 0x4 4.--6. "NVAL_SEL,NVAL_SEL" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 1.--3. "PR_DATA,PR_DATA" "0,1,2,3,4,5,6,7" newline bitfld.word 0x4 0. "VR_TP_EN,." "0,1" line.word 0x6 "VR_XS_PCS_EEE_TXTIMER,VR XS or PCS MMD EEE Tx Timer Register This register is present only if EEE_EN = Enabled." hexmask.word.byte 0x6 8.--12. 1. "TWL_RES,TWL Resolution This field stores the resolution value for the TWL timer." newline bitfld.word 0x6 6.--7. "T1U_RES,T1u Resolution This field stores the resolution value for the T1u timer." "0,1,2,3" newline hexmask.word.byte 0x6 0.--5. 1. "TSL_RES,TSL Resolution This field stores the resolution value for the TSL timer." line.word 0x8 "VR_XS_PCS_EEE_RXTIMER,VR XS or PCS MMD EEE Rx Timer Register This register is present only if EEE_EN = Enabled." hexmask.word.byte 0x8 8.--13. 1. "TWR_RES,TWR Resolution This field stores the resolution value for the TWR timer." newline hexmask.word.byte 0x8 0.--7. 1. "RES_100U,100 us Resolution This field stores the resolution value for the 100 us timer." group.word 0x10016++0x1 line.word 0x0 "VR_XS_PCS_EEE_MCTRL1,VR XS or PCS MMD EEE Mode Control 1 Register This register also controls the Energy Efficient Ethernet (EEE) related settings of DWC_xpcs ." bitfld.word 0x0 8. "TRN_RXLPI,Transparent Rx LPI Mode Enable." "0,1" newline hexmask.word.byte 0x0 1.--6. 1. "TXEN_EA_TMR,TXEN_EA_TMR" newline bitfld.word 0x0 0. "TRN_LPI,Transparent Tx LPI Mode Enable." "0,1" rgroup.word 0x10020++0x3 line.word 0x0 "VR_XS_PCS_DIG_STS,VR XS or PCS MMD Digital Status Register" bitfld.word 0x0 13.--15. "LTX_STATE,LPI Transmit State This field indicates the current state of the LPI Transmit state Machine." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 10.--12. "LRX_STATE,." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 9. "INV_XGM_CHAR,Invalid XGMII Character (RO LH Type) This bit indicates an invalid XGMII character on the Transmit path." "0,1" newline bitfld.word 0x0 8. "INV_XGM_T,Invalid XGMII T Character (RO LH Type) This bit indicates that the transmit data received on XGMII has an invalid Terminate character." "0,1" newline bitfld.word 0x0 7. "INV_XGM_SOP,Invalid XGMII Start Character (RO LH Type) This bit indicates that the XGMII transmit frame contains invalid SOP character." "0,1" newline bitfld.word 0x0 6. "RXFIFO_OVF,Rx FIFO Overflow (RO LH Type) This bit indicates the clock rate compensation FIFO overflow." "0,1" newline bitfld.word 0x0 5. "RXFIFO_UNDF,Rx FIFO Underflow (RO LH Type) This bit indicates the clock rate compensation FIFO underflow." "0,1" newline bitfld.word 0x0 2.--4. "PSEQ_STATE,Power Up Sequence State This field indicates the state variable value of the power-up sequence module." "0,1,2,3,4,5,6,7" newline bitfld.word 0x0 1. "LB_ACTIVE,Reserved" "0,1" line.word 0x2 "VR_XS_PCS_ICG_ERRCNT1,VR XS or PCS MMD Invalid Code Group Error Count1 Register The seven error counters EC0-EC6 do not overflow." hexmask.word.byte 0x2 8.--15. 1. "EC1,Reserved" newline hexmask.word.byte 0x2 0.--7. 1. "EC0,Error Count0: Invalid Code Group Count on Lane 0 (RO COR Type) This field is similar to the EC1 field and is applicable to Lane 0." rgroup.word 0x10030++0x3 line.word 0x0 "VR_XS_PCS_CDT_STS,VR XS or PCS MMD Comma-Detect Status Register" hexmask.word.byte 0x0 12.--15. 1. "CMSH3,Comma-detect Bit shift-lane 3 This field captures the bit-shift introduced in receive data due to comma-detection logic on lane 3." newline hexmask.word.byte 0x0 8.--11. 1. "CMSH2,Comma-detect Bit shift-lane 2 This field captures the bit-shift introduced in receive data due to comma-detection logic on lane 2." newline hexmask.word.byte 0x0 4.--7. 1. "CMSH1,Comma-detect Bit shift-lane 1 This field captures the bit-shift introduced in receive data due to comma-detection logic on lane 1." newline hexmask.word.byte 0x0 0.--3. 1. "CMSH0,Comma-detect Bit shift-lane 0 This field captures the bit-shift introduced in receive data due to comma-detection logic on lane 0." line.word 0x2 "VR_XS_PCS_MISC_STS,VR XS or PCS MMD Miscellaneous Status Register" hexmask.word.byte 0x2 0.--6. 1. "BKSH,BKSH" tree.end AUTOINDENT.OFF